1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2015/07/25 19:27:20 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+csr|ansi scroll-region plus cursor save & restore,
380 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
382 # The normal (ANSI) flavor of "media copy" building block asserts that
383 # characters sent to the printer do not echo on the screen. DEC terminals
384 # can also be put into autoprinter mode, where each line is sent to the
385 # printer as you move off that line, e.g., by a carriage return.
386 ansi+pp|ansi printer port,
388 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
389 dec+pp|DEC autoprinter mode,
390 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
392 # The IBM PC alternate character set. Plug this into any Intel console entry.
393 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
394 # ROM graphics for control characters such as the diamond, up- and down-arrow.
395 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
396 # will work with any Intel console, they all seem to have inherited \E[11m
397 # from the ANSI.SYS de-facto standard.
398 klone+acs|alternate character set for ansi.sys displays,
399 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
400 rmacs=\E[10m, smacs=\E[11m,
402 # Highlight controls corresponding to the ANSI.SYS standard. Most
403 # console drivers for Intel boxes obey these. Makes the same assumption
404 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
405 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
406 klone+sgr|attribute control for ansi.sys displays,
407 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
408 rmso=\E[m, rmul=\E[m,
409 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
410 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
413 # Most Intel boxes do not treat "invis" (invisible) text.
414 klone+sgr8|attribute control for ansi.sys displays,
416 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
419 # Highlight controls corresponding to the ANSI.SYS standard. *All*
420 # console drivers for Intel boxes obey these. Does not assume \E[11m will
421 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
422 # diamond and arrow characters under curses.
423 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
424 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
426 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
427 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
430 # KOI8-R (RFC1489) acs (alternate character set)
431 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
432 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
433 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
434 rmacs=\E[10m, smacs=\E[11m,
436 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
437 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
438 # but equivalent strings that don't rely on that coincidence:
439 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
440 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
441 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
442 # They match a subset of ECMA-48.
443 klone+color|color control for ansi.sys and ISO6429-compatible displays,
444 colors#8, ncv#3, pairs#64,
445 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
447 # This is better than klone+color, it doesn't assume white-on-black as the
448 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
449 ecma+color|color control for ECMA-48-compatible terminals,
451 colors#8, ncv#3, pairs#64,
452 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
454 # Attribute control for ECMA-48-compatible terminals
455 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
456 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
458 # For comparison, here are all the capabilities implied by the Intel
459 # Binary Compatibility Standard (level 2) that fit within terminfo.
460 # For more detail on this rather pathetic standard, see the comments
461 # near the end of this file.
462 ibcs2|Intel Binary Compatibility Standard prescriptions,
463 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
464 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
465 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
466 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
467 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
468 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
469 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
472 #### ANSI/ECMA-48 terminals and terminal emulators
474 # See near the end of this file for details on ANSI conformance.
475 # Don't mess with these entries! Lots of other entries depend on them!
477 # This section lists entries in a least-capable to most-capable order.
478 # if you're in doubt about what `ANSI' matches yours, try them in that
479 # order and back off from the first that breaks.
481 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
482 # and more than one page of memory. It uses local motions instead of
483 # direct cursor addressing, and makes almost no assumptions. It does
484 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
485 ansi-mr|mem rel cup ansi,
487 cols#80, lines#24, use=vanilla, use=ansi+erase,
490 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
491 # beware of screen size problems and memory relative cursor addressing.
492 ansi-mini|any ansi terminal with pessimistic assumptions,
494 cols#80, lines#24, use=vanilla, use=ansi+cup,
497 # ansi-mtabs adds relative addressing and minimal tab support
498 ansi-mtabs|any ansi terminal with pessimistic assumptions,
500 ht=^I, use=ansi-mini, use=ansi+local1,
502 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
504 # The following is an entry for the full ANSI 3.64 (1977). It lacks
505 # padding, but most terminals using the standard are "fast" enough
506 # not to require any -- even at 9600 bps. If you encounter problems,
507 # try including the padding specifications.
509 # Note: the :as: and :ae: specifications are not implemented here, for
510 # the available termcap documentation does not make clear WHICH alternate
511 # character set to specify. ANSI 3.64 seems to make allowances for several.
512 # Please make the appropriate adjustments to fit your needs -- that is
513 # if you will be using alternate character sets.
515 # There are very few terminals running the full ANSI 3.64 standard,
516 # so I could only test this entry on one verified terminal (Visual 102).
517 # I would appreciate the results on other terminals sent to me.
519 # Please report comments, changes, and problems to:
521 # U.S. MAIL: Hugh Hansard
524 # Atlanta, GA. 30322.
526 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
528 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
529 ansi77|ansi 3.64 standard 1977 version,
531 cols#80, it#8, lines#24,
532 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
533 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
534 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
535 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
536 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
537 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
538 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
539 smso=\E[7m, smul=\E[4m,
541 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
542 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
543 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
544 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
545 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
546 # to confuse many emulators. On the other hand, we can count on these programs
547 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
548 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
549 # ANSI.SYS influence.
550 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
551 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
553 cols#80, it#8, lines#24,
554 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
555 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
556 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
557 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
558 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
560 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
561 lines#25, use=pcansi-m,
562 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
563 lines#33, use=pcansi-m,
564 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
565 lines#43, use=pcansi-m,
566 # The color versions. All PC emulators do color...
567 pcansi|ibm-pc terminal programs claiming to be ansi,
568 use=klone+color, use=pcansi-m,
569 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
570 lines#25, use=pcansi,
571 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
572 lines#33, use=pcansi,
573 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
574 lines#43, use=pcansi,
576 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
577 # If you want pound signs rather than dollars, replace `B' with `A'
578 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
579 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
580 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
582 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
583 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
584 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
585 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
586 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
587 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
588 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
589 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
590 vpa=\E[%i%p1%dd, use=pcansi-m,
592 ansi+enq|ncurses extension for ANSI ENQ,
593 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
596 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
597 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
598 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
599 ansi|ansi/pc-term compatible with color,
600 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
602 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
603 # all the normal ANSI stuff with no extensions. It assumes
604 # insert/delete line/char is there, so it won't work with
605 # vt100 clones. It assumes video attributes for bold, blink,
606 # underline, and reverse, which won't matter much if the terminal
607 # can't do some of those. Padding is assumed to be zero, which
608 # shouldn't hurt since xon/xoff is assumed.
609 ansi-generic|generic ansi standard terminal,
611 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
612 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
613 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
614 use=ansi+sgrbold, use=ansi+arrows,
616 #### DOS ANSI.SYS variants
618 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
619 # documentation (except for the keyboard key reassignment feature, which
620 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
621 # though undocumented. The <pfkey> capability is untested but should work for
622 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
623 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
624 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
625 OTbs, am, mir, msgr, xon,
627 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
628 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
629 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
630 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
631 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
632 u7=\E[6n, use=klone+color, use=klone+sgr8,
634 # Keypad: Home=\0G Up=\0H PrPag=\0I
635 # ka1,kh kcuu1 kpp,ka3
637 # Left=\0K 5=\0L Right=\0M
640 # End=\0O Down=\0P NxPag=\0Q
641 # kc1,kend kcud1 kc3,knp
646 # On keyboard with 12 function keys,
647 # shifted f-keys: F13-F24
648 # control f-keys: F25-F36
649 # alt f-keys: F37-F48
650 # The shift/control/alt keys do not modify each other, but alt overrides both,
651 # and control overrides shift.
653 # <pfkey> capability for F1-F48 -TD
654 ansi.sys|ANSI.SYS 3.1 and later versions,
655 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
656 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
657 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
658 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
659 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
660 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
661 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
662 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
663 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
664 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
665 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
666 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
667 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<%t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t%'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
671 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
672 # This should only be used when the terminal emulator cannot redefine the keys.
673 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
674 # definitions must be restored. If the terminal emulator is quit while in vi
675 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
676 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
677 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
678 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
679 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
680 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
681 # Consequently the End keypad key could not be set (it is relatively safe and
682 # actually useful because it sends ^@ O, which beeps and opens a line above).
683 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
684 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
685 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
686 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
689 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
690 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
691 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
692 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
695 # See ansi.sysk and nansi.sys above.
696 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
697 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
698 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
701 #### Atari ST terminals
703 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
705 tw52|tw52-color|Toswin window manager with color,
707 colors#16, pairs#256,
708 oc=\Eb?\Ec0, op=\Eb?\Ec0,
709 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
710 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
711 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
712 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
714 tw52-m|Toswin window manager monochrome,
717 bold=\Eya, dch1=\Ea, dim=\EyB,
718 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
719 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
720 smso=\EyQ, smul=\EyH, use=at-m,
721 tt52|Atari TT medium and high resolution,
722 lines#30, use=at-color,
723 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
725 colors#16, pairs#256,
726 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
727 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
728 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
729 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
730 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
732 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
734 cols#80, it#8, lines#24,
735 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
736 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
737 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
738 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
739 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
740 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
741 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
742 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
743 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
744 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
745 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
746 tw100|toswin vt100 window mgr,
748 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
749 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
750 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
751 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
752 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
753 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
754 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
755 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
756 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
757 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
758 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
759 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
760 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
761 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
762 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
763 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
764 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
765 rmso=\E[m, rmul=\E[m,
766 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
768 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
769 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
770 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
771 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
772 # The entries for stv52 and stv52pc probably need a revision.
773 stv52|MiNT virtual console,
775 cols#80, it#8, lines#30,
776 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
777 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
778 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
779 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
780 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
781 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
782 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
783 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
784 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
785 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
786 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
787 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
788 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
789 stv52pc|MiNT virtual console with PC charset,
791 cols#80, it#8, lines#30,
792 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
793 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
794 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
795 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
796 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
797 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
798 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
799 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
800 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
801 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
802 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
803 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
804 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
807 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
810 cols#80, it#8, lines#25,
811 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
812 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
813 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
814 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
815 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
816 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
817 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
819 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
821 # MiNT VT52 emulation. 80 columns, 25 rows.
822 # MiNT is Now TOS, the operating system which comes with all Ataris now
823 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
824 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
825 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
826 st52-old|Atari ST with VT52 emulation,
829 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
830 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
831 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
832 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
833 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
834 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
835 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
836 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
837 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
840 #### Apple Terminal.app
842 # nsterm*|Apple_Terminal - AppKit Terminal.app
844 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
845 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
846 # Server and Mac OS X operating systems. There is also a
847 # "terminal.app" in GNUStep, but I believe it to be an unrelated
848 # codebase and I have not attempted to describe it here.
850 # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
851 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
852 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
853 # version supports color.
855 # To determine the version of Terminal.app you're using by running:
857 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
859 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
861 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
863 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
865 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
867 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
869 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
870 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
871 # might work too, but really you're on your own here since these
872 # systems are very obsolete and I can't test them. I do welcome
873 # patches, though :).
877 # For GNUstep_Terminal, you're probably best off using "linux" or
878 # writing your own terminfo.
880 # For MacTelnet, you're on your own. It's a different codebase, and
881 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
883 # For iTerm.app, see "iterm".
886 # The AppKit Terminal.app descriptions all have names beginning with
887 # "nsterm". Note that the statusline (-s) versions use the window
888 # titlebar as a phony status line, and may produce warnings during
889 # compilation as a result ("tsl uses 0 parameters, expected 1".)
890 # Ignore these warnings, or even ignore these entries entirely. Apps
891 # which need to position the cursor or do other fancy stuff inside the
892 # status line won't work with these entries. They're primarily useful
893 # for programs like Pine which provide simple notifications in the
894 # status line. Please note that non-ASCII characters don't work right
895 # in the status line, since Terminal.app incorrectly interprets their
896 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
897 # versions) or only accepts status lines consisting entirely of
898 # characters from the first 256 Unicode positions (including C1 but
901 # The Mythology* of AppKit Terminal.app:
903 # In the days of NeXTSTep 0.x and 1.x there were two incompatible
904 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
905 # shareware replacement for Terminal called "Stuart" which NeXT bought
906 # and used as the basis for the Terminal.app in NeXTstep 2+,
907 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
908 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
909 # capabilities for the early versions, but I believe that the
910 # TERM_PROGRAM_VERSION may have been reset at some point.
912 # The early versions were tailored to the NeXT character set. Sometime
913 # after the Apple aquisition the encoding was swiched to MacRoman
914 # (initally with serious altcharset bugs due to incomplete conversion
915 # of the old NeXT code,) and then later to UTF-8. Alos sometime during
916 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
917 # 8-color support (initially buggy when combined with attributes, but
918 # that was later fixed.) More recently, around Mac OS X version 10.3
919 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
920 # some versions (for instance 133-1 which shipped with Mac OS X
921 # version 10.4) this suffered from the <bce> bug, but that seems to
922 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
924 # In the early days of Mac OS X the terminal was fairly buggy and
925 # would routinely crash under load. Many of these bugs seem to have
926 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
927 # some may still remain. This change seems to correspond to
928 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
931 # * This may correspond with what actually happened, but I don't
932 # know. It is based on guesswork, hearsay, private correspondence,
933 # my faulty memory, and the following online sources and references:
935 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
936 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
938 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
939 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
941 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
942 # "nsterm" to comply with the name length and case conventions and
943 # limitations of various software packages [notably Solaris terminfo
944 # and UNIX.] A single Apple_Terminal alias is retained for
945 # backwards-compatbility.
947 # * Added function key support (F1-F4). These only work in Terminal.app
948 # version 51, hopefully the capabilities won't cause problems for people
951 # * Added "full color" (-c) entries which support the 16-color mode in
954 # * By default, version 51 uses UTF-8 encoding with broken altcharset
955 # support, so "ASCII" (-7) entries without altcharset support were
958 # nsterm - AppKit Terminal.app
960 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
961 # Terminal.app. It is a partial VT100 emulation with some xterm-like
962 # extensions. This terminfo was written to describe versions 41
963 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
964 # version 10.1) of Terminal.app.
966 # Terminal.app runs under the Mac OS X Quartz windowing system (and
967 # other AppKit-supported windowing systems.) On the Mac OS X machine I
968 # use, the executable for Terminal.app is:
969 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
971 # If you're looking for a description of the full-screen system
972 # console which runs under Apple's Darwin operating system on PowerPC
973 # platforms, see the "xnuppc" entry instead.
975 # There were no function keys in version 41. In version 51, there are
976 # four working function keys (F1, F2, F3 and F4.) The function keys
977 # are included in all of these entries.
979 # It does not support mouse pointer position reporting. Under some
980 # circumstances the cursor can be positioned using option-click; this
981 # works by comparing the cursor position and the selected position,
982 # and simulating enough cursor-key presses to move the cursor to the
983 # selected position. This technique fails in all but the simplest
986 # It provides partial ANSI color support (background colors interacted
987 # badly with bold in version 41, though, as reflected in :ncv:.) The
988 # monochrome (-m) entries are useful if you've disabled color support
989 # or use a monochrome monitor. The full color (-c) entries are useful
990 # in version 51, which doesn't exhibit the background color bug. They
991 # also enable an xterm-compatible 16-color mode.
993 # The configurable titlebar is set using xterm-compatible sequences;
994 # it is used as a status bar in the statusline (-s) entries. Its width
995 # depends on font sizes and window sizes, but 50 characters seems to
996 # be the default for an 80x24 window.
998 # The MacRoman character encoding is used for some of the alternate
999 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
1000 # disable alternate character set support entirely, and the "VT100"
1001 # (-acs) entries rely instead on Terminal.app's own buggy VT100
1002 # graphics emulation, which seems to think the character encoding is
1003 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
1004 # are useful in Terminal.app version 51, which supports UTF-8 and
1005 # other ASCII-compatible character encodings but does not correctly
1006 # implement VT100 graphics; once VT100 graphics are correctly
1007 # implemented in Terminal.app, the "VT100" (-acs) entries should be
1008 # usable in any ASCII-compatible character encoding [except perhaps
1009 # in UTF-8, where some experts argue for disallowing alternate
1010 # characters entirely.]
1012 # Terminal.app reports "vt100" as the terminal type, but exports
1013 # several environment variables which may aid detection in a shell
1014 # profile (i.e. .profile or .login):
1017 # TERM_PROGRAM=Apple_Terminal
1018 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
1019 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
1021 # For example, the following Bourne shell script would detect the
1022 # correct terminal type:
1024 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
1027 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
1035 # In a C shell derivative, this would be accomplished by:
1037 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
1038 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
1039 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
1040 # setenv TERM "nsterm-old"
1042 # setenv TERM "nsterm-c-7"
1047 # The '+' entries are building blocks
1048 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
1049 am, bw, msgr, xenl, xon,
1050 cols#80, it#8, lines#24,
1051 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1052 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1053 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1054 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1055 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
1056 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
1057 ind=^J, invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB,
1058 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
1059 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1060 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1061 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
1062 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1063 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
1065 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
1066 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1067 enacs=\E(B\E)0, rmacs=^O,
1068 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1069 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1071 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
1072 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245,
1073 enacs=\E(B\E)0, rmacs=^O,
1074 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1075 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1077 # compare with xterm+sl-twm
1078 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
1079 wsl#50, use=xterm+sl-twm,
1081 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
1082 op=\E[0m, use=ibm+16color,
1084 nsterm+c41|AppKit Terminal.app v41 color support,
1085 colors#8, ncv#37, pairs#64,
1086 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1088 # These are different combinations of the building blocks
1090 # ASCII charset (-7)
1091 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
1094 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
1095 use=nsterm+s, use=nsterm+7,
1097 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
1098 use=nsterm+c41, use=nsterm+7,
1100 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
1101 use=nsterm+c, use=nsterm+7,
1103 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
1104 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
1106 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
1107 use=nsterm+s, use=nsterm+c, use=nsterm+7,
1109 # VT100 alternate-charset (-acs)
1110 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
1113 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
1114 use=nsterm+s, use=nsterm+acs,
1116 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
1117 use=nsterm+c41, use=nsterm+acs,
1119 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
1120 use=nsterm+c, use=nsterm+acs,
1122 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
1123 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
1125 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
1126 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
1129 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
1132 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
1133 use=nsterm+s, use=nsterm+mac,
1135 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
1136 use=nsterm+c41, use=nsterm+mac,
1138 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
1139 use=nsterm+c, use=nsterm+mac,
1141 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
1142 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
1144 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
1145 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
1147 # In Mac OS X version 10.5 the format of the preferences has changed
1148 # and a new, more complex technique is needed, e.g.,
1150 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
1151 # "NSUserDefaults");ud=NSUserDefaults.alloc();
1152 # ud.init();prefs=ud.persistentDomainForName_(
1153 # "com.apple.Terminal");prefs["Window Settings"][
1154 # prefs["Default Window Settings"]]["TerminalType"
1155 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
1156 # "com.apple.Terminal")' nsterm-16color
1158 # and it is still not settable from the preferences dialog. This is
1159 # tracked under rdar://problem/7365108 and rdar://problem/7365134
1160 # in Apple's bug reporter.
1162 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
1163 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
1164 # vt52, vt100, vt102 and xterm.
1165 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
1167 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
1168 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
1169 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
1170 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1171 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1172 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
1173 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
1174 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
1175 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
1176 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
1178 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
1179 # the background color erase feature. The newer version 240.2 in Mac OS X
1180 # version 10.5 does not.
1182 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
1183 # and D P Schreber comparing to nsterm-c-s-acs.
1185 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
1186 # can be set in Terminal.app, e.g.,
1188 # defaults write com.apple.Terminal TermCapString nsterm-bce
1190 # and that it is not set in Terminal's preferences dialog.
1192 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
1195 # * The terminal description matches the default settings.
1196 # * The keyboard is configurable via a dialog.
1197 # * By default khome, kend, knext and kprev are honored only with a
1199 # * There are bindings for control left/right arrow (but not up/down).
1200 # Added those to nsterm-16color, which is the version used for OS X 10.6
1201 # * "Allow VT100 application keypage mode" is by default disabled.
1202 # There is no way to press keypad-comma unless application mode is enabled
1204 # * 132-column mode stopped working during vttest's tests. Consider it broken.
1205 # * CHT, REP, SU, SD are buggy.
1206 # * ECH works (also in Leopard), but is not used here for compatibility.
1207 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
1208 # xterm-256color. However, it adds "nsterm", so it is possible to use the
1209 # nsterm entry from this file to override the MacPorts (20110404) or
1210 # system (20081102) copy of this file.
1211 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
1212 # dialog defaults to xterm-256color. Alternative selections are ansi,
1213 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
1214 # the menu says "Declare terminal as" without promising to actually emulate
1215 # the corresponding terminals. Indeed, changing TERM does not affect the
1216 # emulation itself. This means that
1217 # + the function-keys do not match for dtterm for kf1-kf4 as well as
1219 # + the color model is the same for each setting of TERM (does not match
1221 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
1222 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
1223 # + the vt52 emulation does not give a usable shell because screen-clearing
1224 # does not work as expected.
1225 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
1226 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
1227 # as well as unmasking F10 (which had been used in the window manager). Those
1228 # keys are listed in this entry.
1229 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
1230 bce, use=nsterm-16color,
1232 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
1233 # TERM_PROGRAM_VERSION=309
1234 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
1235 # TERM_PROGRAM_VERSION=303
1236 nsterm-256color|Terminal.app in OS X 10.8,
1237 use=xterm+256setaf, use=nsterm-bce,
1239 nsterm-build326|Terminal.app in OS X 10.9,
1240 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
1241 kf18=\E[32~, kDC5=\E[3;5~, kDC7=\E[3;5~, kLFT3=\Eb,
1242 kLFT5=\E[1;5D, kRIT3=\Ef, kRIT5=\E[1;5C,
1243 use=nsterm-256color,
1246 nsterm-build343|Terminal.app in OS X 10.10,
1247 kend=\EOF, khome=\EOH, use=nsterm-build326,
1249 # This is an alias which should always point to the "current" version
1250 nsterm|Apple_Terminal|AppKit Terminal.app,
1251 use=nsterm-build343,
1253 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
1254 # more featureful) terminal emulator for Mac OS X. It is similar
1255 # enough in capabilities to nsterm-16color that I have derived this
1256 # description from that one, but as far as I know they share no code.
1257 # Many of the features are user-configurable, but I attempt only to
1258 # describe the default configuration.
1260 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
1262 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
1264 csr@, dim@, kend=\EOF, khome=\EOH,
1265 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1266 use=xterm+256setaf, use=nsterm-16color,
1268 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
1270 # On PowerPC platforms, Apple's Darwin operating system uses a
1271 # full-screen system console derived from a NetBSD framebuffer
1272 # console. It is an ANSI-style terminal, and is not really VT-100
1275 # Under Mac OS X, this is the system console driver used while in
1276 # single-user mode [reachable by holding down Command-S during the
1277 # boot process] and when logged in using console mode [reachable by
1278 # typing ">console" at the graphical login prompt.]
1280 # If you're looking for a description of the Terminal.app terminal
1281 # emulator which runs under the Mac OS X Quartz windowing system (and
1282 # other AppKit-supported windowing systems,) see the "nsterm"
1285 # NOTE: Under Mac OS X version 10.1, the default login window does not
1286 # prompt for user name, instead requiring an icon to be selected from
1287 # a list of known users. Since the special ">console" login is not in
1288 # this list, you must make one of two changes in the Login Window
1289 # panel of the Login section of System Prefs to make the special
1290 # ">console" login accessible. The first option is to enable 'Show
1291 # "Other User" in list for network users', which will add a special
1292 # "Other..." icon to the graphical login panel. Selecting "Other..."
1293 # will present the regular graphical login prompt. The second option
1294 # is to change the 'Display Login Window as:' setting to 'Name and
1295 # password entry fields', which replaces the login panel with a
1296 # graphical login prompt.
1298 # There are no function keys, at least not in Darwin 1.3.
1300 # It has no mouse support.
1302 # It has full ANSI color support, and color combines correctly with
1303 # all three supported attributes: bold, inverse-video and underline.
1304 # However, bold colored text is almost unreadable (bolding is
1305 # accomplished using shifting and or-ing, and looks smeared) so bold
1306 # has been excluded from the list of color-compatible attributes
1307 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
1308 # monochrome monitor.
1310 # There is one serious bug with this terminal emulation's color
1311 # support: repositioning the cursor onto a cell with non-matching
1312 # colors obliterates that cell's contents, replacing it with a blank
1313 # and displaying a colored cursor in the "current" colors. There is
1314 # no complete workaround at present [other than using the monochrome
1315 # (-m) entries,] but removing the (msgr) capability seemed to help.
1317 # The "standout" chosen was simple reverse-video, although a colorful
1318 # standout might be more aesthetically pleasing. Similarly, the bold
1319 # chosen is the terminal's own smeared bold, although a simple
1320 # color-change might be more readable. The color-bold (-b) entries
1321 # uses magenta colored text for bolding instead. The fancy color (-f
1322 # and -f2) entries use color for bold, standout and underlined text
1323 # (underlined text is still underlined, though.)
1325 # Apparently the terminal emulator does support a VT-100-style
1326 # alternate character set, but all the alternate character set
1327 # positions have been left blank in the font. For this reason, no
1328 # alternate character set capabilities have been included in this
1329 # description. The console driver appears to be ASCII-only, so (enacs)
1330 # has been excluded [although the VT-100 sequence does work.]
1332 # The default Mac OS X and Darwin installation reports "vt100" as the
1333 # terminal type, and exports no helpful environment variables. To fix
1334 # this, change the "console" entry in /etc/ttys from "vt100" to
1335 # "xnuppc-WxH", where W and H are the character dimensions of your
1336 # console (see below.)
1338 # The font used by the terminal emulator is apparently one originally
1339 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
1340 # file includes descriptions for the following geometries:
1342 # Pixels Characters Entry Name (append -m for monochrome)
1343 # -------------------------------------------------------------------
1344 # 640x400 80x25 xnuppc-80x25
1345 # 640x480 80x30 xnuppc-80x30
1346 # 720x480 90x30 xnuppc-90x30
1347 # 800x600 100x37 xnuppc-100x37
1348 # 896x600 112x37 xnuppc-112x37
1349 # 1024x640 128x40 xnuppc-128x40
1350 # 1024x768 128x48 xnuppc-128x48
1351 # 1152x768 144x48 xnuppc-144x48
1352 # 1280x1024 160x64 xnuppc-160x64
1353 # 1600x1024 200x64 xnuppc-200x64
1354 # 1600x1200 200x75 xnuppc-200x75
1355 # 2048x1536 256x96 xnuppc-256x96
1357 # The basic "xnuppc" entry includes no size information, and the
1358 # emulator includes no reporting capability, so you'll be at the mercy
1359 # of the TTY device (which reports incorrectly on my hardware.) The
1360 # color-bold entries do not include size information.
1362 # The '+' entries are building blocks
1363 xnuppc+basic|Darwin PowerPC Console basic capabilities,
1366 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1367 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
1368 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1369 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
1370 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
1371 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
1372 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
1373 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1375 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1376 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1377 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
1379 xnuppc+c|Darwin PowerPC Console ANSI color support,
1380 colors#8, ncv#32, pairs#64,
1381 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1383 xnuppc+b|Darwin PowerPC Console color-bold support,
1386 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1389 xnuppc+f|Darwin PowerPC Console fancy color support,
1391 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
1392 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
1394 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
1397 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
1398 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
1400 # Building blocks for specific screen sizes
1401 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
1404 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
1407 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
1410 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
1413 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
1416 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
1419 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
1422 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
1425 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
1428 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
1431 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
1434 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
1437 # These are different combinations of the building blocks
1439 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
1442 xnuppc|darwin|Darwin PowerPC Console (color),
1443 use=xnuppc+c, use=xnuppc+basic,
1445 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
1448 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
1449 use=xnuppc+b, use=xnuppc+c,
1451 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
1454 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
1455 use=xnuppc+f, use=xnuppc+c,
1457 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
1460 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
1461 use=xnuppc+f2, use=xnuppc+c,
1463 # Combinations for specific screen sizes
1464 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
1465 use=xnuppc+80x25, use=xnuppc+basic,
1467 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
1468 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
1470 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
1471 use=xnuppc+80x30, use=xnuppc+basic,
1473 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
1474 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
1476 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
1477 use=xnuppc+90x30, use=xnuppc+basic,
1479 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
1480 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
1482 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
1483 use=xnuppc+100x37, use=xnuppc+basic,
1485 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
1486 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
1488 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
1489 use=xnuppc+112x37, use=xnuppc+basic,
1491 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
1492 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
1494 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
1495 use=xnuppc+128x40, use=xnuppc+basic,
1497 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
1498 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
1500 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
1501 use=xnuppc+128x48, use=xnuppc+basic,
1503 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
1504 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
1506 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
1507 use=xnuppc+144x48, use=xnuppc+basic,
1509 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
1510 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
1512 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
1513 use=xnuppc+160x64, use=xnuppc+basic,
1515 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
1516 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
1518 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
1519 use=xnuppc+200x64, use=xnuppc+basic,
1521 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
1522 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
1524 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
1525 use=xnuppc+200x75, use=xnuppc+basic,
1527 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
1528 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
1530 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
1531 use=xnuppc+256x96, use=xnuppc+basic,
1533 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
1534 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
1539 # BeOS entry for Terminal program Seems to be almost ANSI
1540 beterm|BeOS Terminal,
1541 am, eo, mir, msgr, xenl, xon,
1542 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
1543 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1544 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1545 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1546 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1547 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1548 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
1549 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1550 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1551 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
1552 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
1553 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
1554 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
1555 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
1556 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
1557 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
1558 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1559 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
1560 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
1561 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
1567 # This entry is good for the 1.2.13 or later version of the Linux console.
1569 # ***************************************************************************
1572 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
1573 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
1574 # * character. Here are the keymap replacement lines that will set this up: *
1576 # keycode 15 = Tab Tab
1577 # alt keycode 15 = Meta_Tab
1578 # shift keycode 15 = F26
1579 # string F26 ="\033[Z"
1581 # * This has to use a key slot which is unfortunate (any unused one will *
1582 # * do, F26 is the higher-numbered one). The change ought to be built *
1583 # * into the kernel tables. *
1585 # ***************************************************************************
1587 # All linux kernels since 1.2.13 (at least) set the screen size
1588 # themselves; this entry assumes that capability.
1590 linux-basic|linux console,
1591 am, bce, eo, mir, msgr, xenl, xon,
1593 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1594 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1595 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1596 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1597 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1598 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1599 el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
1600 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1601 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
1602 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1603 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
1604 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1605 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1606 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
1607 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1608 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1609 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1610 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
1611 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1612 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
1613 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
1616 linux-m|Linux console no color,
1618 setab@, setaf@, setb@, setf@, use=linux,
1620 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1621 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1622 # not supposedly back-portable to older SV curses (although it has worked fine
1623 # on Solaris for several years) and not supported in ncurses versions before
1625 linux-c-nc|linux console with color-change,
1627 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
1628 oc=\E]R, use=linux-basic,
1629 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1630 linux-c|linux console 1.3.6+ for older ncurses,
1632 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
1633 oc=\E]R, use=linux-basic,
1635 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1636 # get a block cursor for cvvis.
1637 # reported by Frank Heckenbach <frank@g-n-u.de>.
1638 linux2.2|linux 2.2.x console,
1639 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1640 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1642 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1643 # http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
1644 # Using SI/SO has the drawback that it confuses screen. SCS would work.
1645 # However, SCS is buggy (see comment in Debian #515609) -TD
1646 # Further, this breaks longstanding workarounds for Linux console's line
1647 # drawing (see Debian 665959) -TD
1648 linux2.6|linux 2.6.x console,
1650 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1651 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1653 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1654 # It is the same as xterm's erase-saved-lines feature.
1655 linux3.0|linux 3.0 kernels,
1656 E3=\E[3J, use=linux2.6,
1658 # This is Linux console for ncurses.
1659 linux|linux console,
1662 # Subject: linux 2.6.26 vt back_color_erase
1663 # Changes to the Linux console driver broke bce model as reported in
1664 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1666 # http://lkml.org/lkml/2008/4/26/305
1667 # http://lkml.org/lkml/2008/10/3/66
1668 linux2.6.26|linux console w/o bce,
1671 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1672 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1673 ich@, ich1@, use=linux,
1675 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1676 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1677 linux-koi8|linux with koi8 alternate character set,
1678 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
1679 use=linux, use=klone+koi8acs,
1681 # Another entry for KOI8-r with Qing Long's acsc.
1682 # (which one better complies with the standard?)
1683 linux-koi8r|linux with koi8-r alternate character set,
1684 use=linux, use=klone+koi8acs,
1686 # Entry for the latin1 and latin2 fonts
1687 linux-lat|linux with latin1 or latin2 alternate character set,
1688 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1691 # This uses graphics from VT codeset instead of from cp437.
1692 # reason: cp437 (aka "straight to font") is not functional under luit.
1693 # from: Andrey V Lukyanov <land@long.yar.ru>.
1694 linux-vt|linux console using VT codes for graphics,
1695 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1696 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1699 # This is based on the Linux console (relies on the console to perform some
1700 # of the functionality), but does not recognize as many control sequences.
1701 # The program comes bundled with an old (circa 1998) copy of the Linux
1702 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1703 # \E* move cursor to home, as as \E[H
1705 # \EE move cursor to beginning of row
1706 # \E[y,xf same as \E[y,xH
1708 # Note: The status-line support is buggy (dsl does not work).
1709 kon|kon2|jfbterm|Kanji ON Linux console,
1711 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1712 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1715 # 16-color linux console entry; this works with a 256-character
1716 # console font but bright background colors turn into dim ones when
1717 # you use a 512-character console font. This uses bold for bright
1718 # foreground colors and blink for bright background colors.
1719 linux-16color|linux console with 16 colors,
1720 colors#16, ncv#63, pairs#256,
1721 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1722 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
1725 # bterm (bogl 0.1.18)
1726 # Implementation is in bogl-term.c
1727 # Key capabilities from linux terminfo entry
1730 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1731 # bterm does not support sgr, since it only processes one parameter -TD
1732 bterm|bogl virtual terminal,
1734 colors#8, cols#80, lines#24, pairs#64,
1735 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1736 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
1737 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
1738 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1739 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1740 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1741 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1742 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1743 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1744 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1745 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
1746 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1747 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1748 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1753 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1756 cols#80, it#8, lines#25,
1757 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
1758 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1759 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1760 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1761 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
1762 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1763 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1764 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1765 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1766 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1767 smso=\E[7m, smul=\E[4m,
1768 mach-bold|Mach Console with bold instead of underline,
1769 rmul=\E[0m, smul=\E[1m, use=mach,
1770 mach-color|Mach Console with ANSI color,
1772 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1773 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1775 # From: Samuel Thibault
1776 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1777 # Files: i386/i386at/kd.c
1779 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1781 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1782 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1783 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1784 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1785 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m,
1788 mach-gnu-color|Mach Console with ANSI color,
1790 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1791 setaf=\E[3%p1%dm, use=mach-gnu,
1793 # From: Marcus Brinkmann
1794 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1796 # Comments in the original are summarized here:
1798 # hurd uses 8-bit characters (km).
1800 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1802 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1803 # have the eat_newline_glitch. It doesn't support setting or removing tab
1806 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1807 # one byte instead three.
1809 # <ich1> is not included because hurd has insert mode.
1811 # hurd doesn't use ^J for scrolling, because this could put things into the
1812 # scrollback buffer.
1814 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1815 # This is a GNU extension.
1817 # The original has commented-out ncv, but is restored here.
1819 # Reading the source, RIS resets cnorm, but not xmous.
1820 hurd|The GNU Hurd console server,
1821 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1822 colors#8, it#8, ncv#18, pairs#64,
1823 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1824 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1825 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1826 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1827 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1828 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1829 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1830 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1831 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1832 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1833 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
1834 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1835 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1836 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1837 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1838 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1839 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1840 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1841 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1842 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1843 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1844 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1845 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1846 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1847 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1854 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1855 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1856 # right corner without triggering a scroll. The ncurses terminfo library can
1857 # handle this case with the <ich1> capability, and prefers <am> for better
1858 # optimization. Bug: The <op> capability resets attributes.
1859 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1860 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1861 qnx|qnx4|qnx console,
1862 daisy, km, mir, msgr, xhpa, xt,
1863 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1864 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1865 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1866 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1867 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1868 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1869 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1870 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1871 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1872 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1873 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1874 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1875 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1876 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1877 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1878 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1879 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1880 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1881 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1882 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1883 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1884 kext=\377\270, kf1=\377\201, kf10=\377\212,
1885 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1886 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1887 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1888 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1889 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1890 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1891 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1892 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1893 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1894 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1895 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1896 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1897 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1898 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1899 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1900 khlp=\377\350, khome=\377\240, khts=\377\342,
1901 kich1=\377\253, kil1=\377\273, kind=\377\261,
1902 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1903 knp=\377\252, knxt=\377\312, kopn=\377\357,
1904 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1905 kprv=\377\302, krdo=\377\336, kref=\377\354,
1906 kres=\377\360, krfr=\377\347, kri=\377\271,
1907 krmir=\377\313, krpl=\377\362, krst=\377\352,
1908 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1909 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1910 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1911 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1912 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1916 qnxt|qnxt4|QNX4 terminal,
1919 qnxm|QNX4 with mouse events,
1921 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1922 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1923 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1924 smicm=\E/>2h, use=qnx4,
1929 # Monochrome QNX4 terminal or console. Setting this terminal type will
1930 # allow an application running on a color console to behave as if it
1931 # were a monochrome terminal. Output will be through stdout instead of
1932 # console writes because the term routines will recognize that the
1933 # terminal name starts with 'qnxt'.
1935 qnxtmono|Monochrome QNX4 terminal or console,
1939 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1940 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1941 # (TD: derive from original qnx4 entry)
1942 qnxt2|qnx 2.15 serial terminal,
1944 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1945 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1947 # QNX ANSI terminal definition
1950 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1951 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1952 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1953 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1954 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1955 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1956 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1957 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1958 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1959 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1960 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1961 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1962 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1963 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1964 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1965 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1966 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1967 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1968 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1969 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1970 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1971 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1972 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1973 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1974 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1975 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1976 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1977 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1978 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1979 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1980 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1981 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1982 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1983 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1984 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1985 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1986 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1987 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1988 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1989 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1990 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1991 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1992 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1993 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1994 smul=\E[4m, tbc=\E[3g,
1995 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1997 qansi|QNX ansi with console writes,
1998 daisy, xhpa, use=qansi-g,
2000 qansi-t|QNX ansi without console writes,
2003 qansi-m|QNX ansi with mouse,
2005 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
2006 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
2007 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
2008 smicm=\E[>2h, use=qansi,
2010 qansi-w|QNX ansi for windows,
2015 # SCO console and SOS-Syscons console for 386bsd
2016 # (scoansi: had unknown capabilities
2017 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
2018 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
2019 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
2020 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
2021 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
2022 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
2023 # on the <smacs>=\E[12m -- esr)
2025 # klone+sgr-dumb is an error since the acsc does not match -TD
2027 # In this description based on SCO's keyboard(HW) manpage list of default
2028 # function key values:
2029 # F13-F24 are shifted F1-F12
2030 # F25-F36 are control F1-F12
2031 # F37-F48 are shift+control F1-F12
2033 # hpa/vpa work in the console, but not in scoterm:
2037 # SCO's terminfo uses
2040 # which do not work (console or scoterm).
2042 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
2043 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
2044 OTbs, am, bce, eo, xon,
2045 colors#8, cols#80, it#8, lines#25, pairs#64,
2046 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
2047 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
2048 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
2049 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2050 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2051 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
2052 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
2053 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
2054 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
2055 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
2056 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2057 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2058 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
2059 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
2060 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
2061 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
2062 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
2063 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
2064 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
2065 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
2066 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
2067 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
2068 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
2069 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2070 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
2071 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
2072 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
2074 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
2075 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
2076 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
2077 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m,
2078 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
2079 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
2080 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
2081 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
2082 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
2084 # make this easy to change...
2085 scoansi|SCO Extended ANSI standard crt,
2090 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
2091 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
2092 # for the application keypad mode. We have added iris-ansi-ap rather than
2093 # change the original to keypad mode.
2095 # (iris-ansi: added rmam/smam based on init string -- esr)
2097 # This entry, and those derived from it, is used in xwsh (also known as
2098 # winterm). Some capabilities that do not fit into the terminfo model
2099 # include the shift- and control-functionkeys:
2101 # F1-F12 generate different codes when shift or control modifiers are used.
2105 # control-F1 \E[025q
2107 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
2108 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
2110 # The cursor keys also have different codes:
2111 # control-up \E[162q
2112 # control-down \E[165q
2113 # control-left \E[159q
2114 # control-right \E[168q
2117 # shift-down \E[164q
2118 # shift-left \E[158q
2119 # shift-right \E[167q
2121 # control-tab \[072q
2123 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
2125 cols#80, it#8, lines#40,
2126 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
2127 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
2128 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
2129 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
2130 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
2131 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
2132 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2133 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
2134 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
2135 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2136 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
2137 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
2138 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
2139 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
2140 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
2141 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
2142 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
2143 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
2144 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
2146 iris-ansi-ap|IRIS ANSI in application-keypad mode,
2147 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
2148 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
2150 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
2151 # (T.Dickey 98/1/24)
2152 iris-color|xwsh|IRIX ANSI with color,
2154 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
2155 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
2156 rmul=\E[24m, rs1=\Ec,
2157 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2158 sitm=\E[3m, use=vt100+enq, use=klone+color,
2161 #### OpenBSD consoles
2163 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
2165 # The following terminal descriptions for the AMD/Intel PC console
2166 # were prepared based on information contained in the OpenBSD-4.9
2167 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
2169 # Added bce based on testing with tack -TD
2170 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
2171 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
2173 pccon+keys|OpenBSD PC keyboard keys,
2174 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2175 kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
2176 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2177 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2178 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2180 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
2181 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
2182 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
2183 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
2184 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2185 enacs=\E)0$<5>, rmacs=\E(B$<5>,
2186 sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
2187 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
2188 pccon+colors|ANSI colors for OpenBSD PC console,
2191 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2192 pccon+base|base capabilities for OpenBSD PC console,
2193 am, km, mc5i, msgr, npc, nxon, xenl, xon,
2194 cols#80, it#8, lines#24,
2195 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
2196 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
2197 dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2198 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2199 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2200 rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
2201 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2202 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
2203 use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
2204 pccon0|OpenBSD PC console with simple ASCII pseudographics,
2205 use=pccon0-m, use=pccon+colors,
2206 pccon-m|OpenBSD PC console without colors,
2207 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
2208 pccon|OpenBSD PC console,
2209 use=pccon-m, use=pccon+colors,
2211 #### NetBSD consoles
2213 # pcvt termcap database entries (corresponding to release 3.31)
2214 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
2216 # (For the terminfo master file, I translated these into terminfo syntax.
2217 # Then I dropped all the pseudo-HP entries. we don't want and can't use
2218 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
2219 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
2221 # NOTE: <ich1> has been taken out of this entry. for reference, it should
2222 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
2223 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
2224 pcvtXX|pcvt vt200 emulator (DEC VT220),
2225 am, km, mir, msgr, xenl,
2227 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
2228 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2229 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2230 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2231 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2232 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2233 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2234 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2235 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
2236 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
2237 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2238 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
2239 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
2240 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
2241 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
2242 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
2243 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
2244 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2245 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2246 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2248 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2249 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2250 # 50 lines entries; 80 columns
2251 pcvt25|dec vt220 emulation with 25 lines,
2253 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2254 pcvt28|dec vt220 emulation with 28 lines,
2256 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2257 pcvt35|dec vt220 emulation with 35 lines,
2259 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2260 pcvt40|dec vt220 emulation with 40 lines,
2262 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2263 pcvt43|dec vt220 emulation with 43 lines,
2265 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2266 pcvt50|dec vt220 emulation with 50 lines,
2268 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2270 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2271 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2272 # 50 lines entries; 132 columns
2273 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
2275 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2276 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
2278 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2279 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
2281 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2282 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
2284 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2285 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
2287 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2288 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
2290 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2292 # OpenBSD implements a color variation
2293 pcvt25-color|dec vt220 emulation with 25 lines and color,
2295 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
2296 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2297 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2298 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2299 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
2302 # Terminfo entries to enable the use of the ncurses library in colour on a
2303 # NetBSD-arm32 console (only tested on a RiscPC).
2304 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
2305 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
2306 # typo in invis - TD
2307 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
2308 am, bce, msgr, xenl, xon,
2309 cols#80, it#8, lines#30,
2310 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2311 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2312 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2313 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2314 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2315 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2316 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2317 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
2318 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
2319 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2320 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
2321 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
2322 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
2323 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
2324 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2326 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
2327 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2328 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
2331 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
2332 cols#132, lines#50, use=arm100,
2334 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
2335 # manufactured by Sharp for the Japenese market.
2336 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
2337 x68k|x68k-ite|NetBSD/x68k ITE,
2339 kclr=\E[9~, khlp=\E[28~, use=vt220,
2342 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
2344 # (still unfinished, but good enough so far.)
2345 ofcons|DNARD OpenFirmware console,
2348 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
2349 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
2350 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
2351 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
2352 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
2353 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
2354 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
2355 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
2356 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
2357 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
2358 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
2359 rmso=\2330m, rmul=\2330m,
2360 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m,
2361 sgr0=\2330m, smso=\2337m, smul=\2334m,
2363 # NetBSD "wscons" emulator in vt220 mode.
2364 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
2365 # The emulator renders underlined text in red. Colors are otherwise usable.
2367 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
2368 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
2369 # vt220 screens in vttest do not work with this emulator. For instance, it
2370 # identifies itself (primary DA response) as a vt220 with selective erase. But
2371 # the selective erase feature does not work. The secondary response is copied
2372 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
2373 # the level of detail in a termcap, it is a passable emulator, since ECH does
2374 # work. Don't use it on a VMS system -TD
2375 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
2377 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
2378 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
2379 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
2380 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2381 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2382 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
2383 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
2385 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
2388 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
2390 # TERM is by default vt100 for the console, wsvt25 for other ttys.
2391 # Initial testing set TERM=xterm, based on comments by developers, found too
2392 # many differences to continue in that path. However, test-results may be
2393 # useful to people curious about compatibility with xterm.
2395 # Testing with tack:
2397 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
2398 # There is color-bleeding in the color-pairs screen.
2399 # Attributes do not work with color
2401 # Failed: kf1-kf4, kf13-kf48, khome, kend
2402 # (effectively xterm-r6 for function-keys)
2403 # None of the function or cursor key-modifiers are encoded.
2404 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
2406 # Testing with vttest:
2407 # -------------------
2408 # Identifies as vt220 with selective erase
2409 # (however, selective erase refers to DECSCA, SPA)
2410 # Does not implement vt52
2411 # Uses spaces to simulate double-size characters
2412 # Does not support 8-bit controls
2413 # Does not support VT220 reports
2414 # Does not support send/receive mode
2415 # Supports ECH (like rxvt)
2416 # Does not support DECSCA
2417 # Does not support any of the ISO-6429 cursor-movement
2418 # Does not support any of the ISO-6429 miscellaneous tests
2419 # (SL/SR also leave unexpected char on screen too)
2420 # Background does not change in menu 11.6.9 (SGR 22-27)
2421 # None of the xterm special features tests work
2422 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
2423 kbs=\177, use=wsvt25,
2425 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
2427 rcons|BSD rasterconsole,
2429 # Color version of above. Color currently only provided by NetBSD.
2430 rcons-color|BSD rasterconsole with ANSI color,
2433 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
2435 # mgterm -- MGL/MGL2, MobileGear Graphic Library
2436 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
2437 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
2438 # -- compare with cons25w
2440 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
2441 colors#8, cols#80, it#8, lines#18, pairs#64,
2442 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2443 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2444 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2445 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2446 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
2447 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2448 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2449 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2450 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2451 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2452 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
2453 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
2454 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
2455 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
2456 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
2457 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2459 #### FreeBSD console entries
2461 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
2462 # Andrey Chernov maintains the FreeBSD termcap distributions.
2464 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
2465 # or comment out the :cb: capability in the console entry.
2467 # Alexander Lukyanov reports:
2468 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
2469 # Now el1 clears not only to the line beginning, but also a large chunk
2470 # of previous line. But there is another bug - ech does not work at all.
2474 # common entry without semigraphics
2475 # Bug: The <op> capability resets attributes.
2476 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
2477 # instance el1 does if the cursor is moved to the right margin first. Removed
2478 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
2480 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
2481 # Note that this disables standout with color.
2483 # The emulator sends difference strings based on shift- and control-keys,
2485 # F13-F24 are shifted F1-F12
2486 # F25-F36 are control F1-F12
2487 # F37-F48 are shift+control F1-F12
2488 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
2489 am, bce, bw, eo, msgr, npc,
2490 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
2491 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2492 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
2493 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2494 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2495 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
2496 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2497 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2498 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2499 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2500 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2501 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2502 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2503 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2504 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2505 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2506 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2507 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2508 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2509 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2510 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2511 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2512 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2513 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2514 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2515 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2516 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2517 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
2519 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2520 kbs=\177, kdch1=\E[3~, use=cons25,
2521 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2523 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2524 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2525 smul=\E[4m, use=cons25,
2526 cons30|ansi80x30|freebsd console (30-line ansi mode),
2527 lines#30, use=cons25,
2528 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2529 lines#30, use=cons25-m,
2530 cons43|ansi80x43|freebsd console (43-line ansi mode),
2531 lines#43, use=cons25,
2532 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2533 lines#43, use=cons25-m,
2534 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2535 lines#50, use=cons25,
2536 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2537 lines#50, use=cons25-m,
2538 cons60|ansi80x60|freebsd console (60-line ansi mode),
2539 lines#60, use=cons25,
2540 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2541 lines#60, use=cons25-m,
2542 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2543 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
2545 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2547 op@, rmul=\E[m, setab@, setaf@,
2548 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2549 smul=\E[4m, use=cons25r,
2550 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2551 lines#50, use=cons25r,
2552 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2553 lines#50, use=cons25r-m,
2554 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2555 lines#60, use=cons25r,
2556 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2557 lines#60, use=cons25r-m,
2558 # ISO 8859-1 FreeBSD console
2559 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2560 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
2562 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2564 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2565 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2566 smul=\E[4m, use=cons25l1,
2567 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2568 lines#50, use=cons25l1,
2569 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2570 lines#50, use=cons25l1-m,
2571 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2572 lines#60, use=cons25l1,
2573 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2574 lines#60, use=cons25l1-m,
2576 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2577 # which is intended to be xterm-compatible. See for example
2578 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2579 # in particular scterm-teken.c
2581 # For FreeBSD 9 and 10:
2582 # --------------------
2583 # The /etc/ttys entries for console and other ttys are all configured to set
2586 # Testing with tack:
2587 # There is no VT100 line-drawing (uses +'s and -'s)
2588 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2590 # Testing with vttest:
2591 # Menu 2 diamonds don't work, blink ditto, light background ditto
2592 # The terminal identifies itself as VT100 with AVO
2593 # There is no VT52 support
2594 # There is no doublesize character support
2595 # The terminal supports ECH (like rxvt)
2596 # The terminal does not support send/receive mode
2597 # The terminal supports all of the ISO-6429 cursor-movement
2598 # The terminal supports some of the ISO-6429 miscellaneous tests
2599 # (SL/SR also leave unexpected char on screen too)
2601 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2602 # the cells which happen to have ASCII control-character values:
2603 # - ^X arrow pointing up
2604 # . ^Y arrow pointing down
2608 # Those are removed from this entry's acsc string to avoid confusion.
2609 # The resulting description provides correct line-drawing and function-keys -TD
2610 teken|syscons with teken,
2612 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
2613 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2614 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2615 kdch1=\E[3~, kend=\E[F, kent=^M, kf1=\EOP, kf10=\E[21~,
2616 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2617 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2618 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2619 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2620 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2622 #### 386BSD and BSD/OS Consoles
2625 # This was the original 386BSD console entry (I think).
2626 # Some places it's named oldpc3|oldibmpc3.
2627 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2628 origpc3|origibmpc3|IBM PC 386BSD Console,
2629 OTbs, am, bw, eo, xon,
2631 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
2632 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2633 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2634 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2635 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2636 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2637 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2639 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2640 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2643 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
2644 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2645 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2646 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
2648 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2649 # Note, the emulator supports many of the additional console features
2650 # listed in the iBCS2 (e.g. character-set selection) though not all
2651 # are described here. This entry really ought to be upgraded.
2652 # Also note, the console will also work with fewer lines after doing
2653 # "stty rows NN", e.g. to use 24 lines.
2654 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2655 # Bug: The <op> capability resets attributes.
2656 bsdos-pc|IBM PC BSD/OS Console,
2657 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2658 use=bsdos-pc-nobold,
2660 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2661 use=klone+color, use=bsdos-pc-m,
2663 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2664 OTbs, am, eo, km, xon,
2665 cols#80, it#8, lines#25,
2666 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
2667 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2668 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2669 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2670 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
2671 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2672 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
2673 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2676 # Old names for BSD/OS PC console used in releases before 4.1.
2677 pc3|BSD/OS on the PC Console,
2678 use=bsdos-pc-nobold,
2679 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2682 # BSD/OS on the SPARC
2683 bsdos-sparc|Sun SPARC BSD/OS Console,
2686 # BSD/OS on the PowerPC
2687 bsdos-ppc|PowerPC BSD/OS Console,
2692 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2694 # Actually (TD pointed this out at the time the acsc string was added):
2695 # vt52 shouldn't define full acsc since most of the cells don't match.
2696 # see vt100 manual page A-31. This is the list that does match:
2705 # The line-drawing happens to work in several terminal emulators, but should
2706 # not be used as a guide to the capabilities of the vt52. Note in particular
2707 # that vt52 does not support line-drawing characters (the scan-X values refer
2708 # to a crude plotting feature) -TD
2711 cols#80, it#8, lines#24,
2712 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
2713 cub1=\ED, cud1=\EB, cuf1=\EC,
2714 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2715 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2716 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2718 #### DEC VT100 and compatibles
2720 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2721 # and micro consoles can be found in the `obsolete' section. More details on
2722 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2723 # found near the end of this file.
2725 # Except where noted, these entries are DEC's official terminfos.
2726 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2727 # Engineering for more information. Updated terminfos and termcaps
2728 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2730 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2731 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2732 # its name to Boundless Technologies; see http://www.boundless.com.
2735 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2736 # certainly includes what DEC called the `Level 1 editing extension' codes;
2737 # only the very oldest VT100s lacked these and there probably aren't any of
2738 # those left alive. To capture these, use one of the VT102 entries.
2740 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2741 # since the cursor is left in a different position while in the
2742 # weird state (concept at beginning of next line, vt100 at end
2743 # of this line) so all versions of vi before 3.7 don't handle
2744 # <xenl> right on vt100. The correct way to handle <xenl> is when
2745 # you output the char in column 80, immediately output CR LF
2746 # and then assume you are in column 1 of the next line. If <xenl>
2747 # is on, am should be on too.
2749 # I assume you have smooth scroll off or are at a slow enough baud
2750 # rate that it doesn't matter (1200? or less). Also this assumes
2751 # that you set auto-nl to "on", if you set it off use vt100-nam
2754 # The padding requirements listed here are guesses. It is strongly
2755 # recommended that xon/xoff be enabled, as this is assumed here.
2757 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2758 # tab settings are in non-volatile memory and don't need to be
2759 # reset upon login. Also setting the number of columns glitches
2760 # the screen annoyingly. You can type "reset" to get them set.
2762 # The VT100 series terminals have cursor ("arrows") keys which can operate
2763 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2764 # is the reset state, and is assumed to be the normal state. Application
2765 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2766 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2767 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2768 # was provided primarily as an aid to the porting of VT52 applications. It is
2769 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2770 # applications such as vi will always transmit the <smkx> string. Therefore,
2771 # the definitions for the cursor keys are made to match what the terminal
2772 # transmits after the <smkx> string is transmitted. If the <smkx> string
2773 # is a null string or is not defined, then cursor keys are assumed to be in
2774 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2775 # else the application may fail. It is also expected that applications will
2776 # always transmit the <rmkx> string to the terminal before they exit.
2778 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2779 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2780 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2781 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2782 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2783 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2784 # Enter key transmits the same as the Return key (Note: the Return key
2785 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2786 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2787 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2788 # is normally in Numeric Mode. If an application requires that the keypad be
2789 # in Application Mode then it is expected that the user, or the application,
2790 # will set the TERM environment variable to point to a terminfo entry which has
2791 # defined the <smkx> string to include the codes that switch the keypad into
2792 # Application Mode, and the terminfo entry will also define function key
2793 # fields to match the Application Mode control codes. If the <smkx> string
2794 # is a null string or is not defined, then the keypad is assumed to be in
2795 # Numeric Mode. If the <smkx> string switches the keypad into Application
2796 # Mode, it is expected that the <rmkx> string will contain the control codes
2797 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2798 # applications which transmit the <smkx> string will also always transmit the
2799 # <rmkx> string to the terminal before they exit.
2801 # Here's a diagram of the VT100 keypad keys with their bindings.
2802 # The top line is the name of the key (some DEC keyboards have the keys
2803 # labelled somewhat differently, like GOLD instead of PF1, but this is
2804 # the most "official" name). The second line is the escape sequence it
2805 # generates in Application Keypad mode (where "$" means the ESC
2806 # character). The third line contains two items, first the mapping of
2807 # the key in terminfo, and then in termcap.
2808 # _______________________________________
2809 # | PF1 | PF2 | PF3 | PF4 |
2810 # | $OP | $OQ | $OR | $OS |
2811 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2813 # | $Ow | $Ox | $Oy | $Om |
2814 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2816 # | $Ot | $Ou | $Ov | $Ol |
2817 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2819 # | $Oq | $Or | $Os | enter |
2820 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2823 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2825 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2826 # terminfo guidelines. That is a compromise used to assign the remaining
2827 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2829 vt100+keypad|dec vt100 numeric keypad no fkeys,
2830 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2831 vt100+pfkeys|dec vt100 numeric keypad,
2832 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2834 vt100+fnkeys|dec vt100 numeric keypad,
2835 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2836 kf9=\EOw, use=vt100+pfkeys,
2838 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2839 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2840 # use the 5-key arrangement to model the arrow keys as suggested in the
2841 # terminfo guidelines:
2842 # _______________________________________
2843 # | PF1 | PF2 | PF3 | PF4 |
2844 # | $OP | $OQ | $OR | $OS |
2845 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2847 # | $Ow | $Ox | $Oy | $Om |
2848 # |_ka1__K1_|_________|_ka3__K3_|_________|
2850 # | $Ot | $Ou | $Ov | $Ol |
2851 # |_________|_kb2__K2_|_________|_________|
2853 # | $Oq | $Or | $Os | enter |
2854 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2857 # |___________________|_________|_kent_@8_|
2859 vt220+keypad|dec vt220 numeric keypad,
2860 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2861 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2864 vt100+enq|ncurses extension for vt100-style ENQ,
2865 u8=\E[?1;2c, use=ansi+enq,
2866 vt102+enq|ncurses extension for vt102-style ENQ,
2867 u8=\E[?6c, use=ansi+enq,
2869 # And here, for those of you with orphaned VT100s lacking documentation, is
2870 # a description of the soft switches invoked when you do `Set Up'.
2872 # Scroll 0-Jump Shifted 3 0-#
2873 # | 1-Smooth | 1-British pound sign
2874 # | Autorepeat 0-Off | Wrap Around 0-Off
2876 # | | Screen 0-Dark Bkg | | New Line 0-Off
2877 # | | | 1-Light Bkg | | | 1-On
2878 # | | | Cursor 0-Underline | | | Interlace 0-Off
2879 # | | | | 1-Block | | | | 1-On
2881 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2883 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2884 # | | | 1-On | | | 1-50 Hz
2885 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2886 # | | 1-ANSI | | 1-8 Bits
2887 # | Keyclick 0-Off | Parity 0-Off
2889 # Margin Bell 0-Off Parity Sense 0-Odd
2892 # The following SET-UP modes are assumed for normal operation:
2893 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2894 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2895 # Other SET-UP modes may be set for operator convenience or communication
2896 # requirements; I recommend
2897 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2898 # Unless you have a graphics add-on such as Digital Engineering's VT640
2899 # (and even then, whenever it can be arranged!) you should set
2902 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2903 vt100|vt100-am|dec vt100 (w/advanced video),
2904 OTbs, am, mc5i, msgr, xenl, xon,
2905 cols#80, it#8, lines#24, vt#3,
2906 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2907 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2908 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2909 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2910 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2911 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2912 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2913 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2914 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2915 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2916 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2917 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2918 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2919 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2920 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2921 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2923 vt100nam|vt100-nam|vt100 no automargins,
2924 am@, xenl@, use=vt100-am,
2925 vt100-vb|dec vt100 (w/advanced video) & no beep,
2926 bel@, flash=\E[?5h\E[?5l, use=vt100,
2928 # Ordinary vt100 in 132 column ("wide") mode.
2929 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2931 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2932 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2933 cols#132, lines#14, vt@,
2934 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2936 # vt100 with no advanced video.
2937 vt100-nav|vt100 without advanced video option,
2939 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2941 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2942 cols#132, lines#14, use=vt100-nav,
2944 # vt100 with one of the 24 lines used as a status line.
2945 # We put the status line on the top.
2946 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2949 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2950 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2951 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2952 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2954 # Status line at bottom.
2955 # Clearing the screen will clobber status line.
2956 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2959 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2960 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2962 # Most of the `vt100' emulators out there actually emulate a vt102
2963 # This entry (or vt102-nsgr) is probably the right thing to use for
2966 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2968 vt102-w|dec vt102 in wide mode,
2970 rs3=\E[?3h, use=vt102,
2972 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2973 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2974 # string in the canonical vt100 entry above leaves the screen littered
2975 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2976 # after highlight turnoffs. This entry should fix that, and even leave
2977 # ACS support working, at the cost of making multiple-highlight changes
2978 # slightly more expensive.
2979 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2980 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2981 sgr@, sgr0=\E[m, use=vt102,
2983 # VT125 Graphics CRT. Clear screen also erases graphics
2984 # Some vt125's came configured with vt102 support.
2985 vt125|vt125 graphics terminal,
2987 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2989 # This isn't a DEC entry, it came from University of Wisconsin.
2990 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2993 cols#80, it#8, lines#24, vt#3,
2994 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2995 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2996 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2997 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2998 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2999 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
3000 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
3001 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
3002 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
3004 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3005 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
3006 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3008 # vt132 - like vt100 but slower and has ins/del line and such.
3009 # I'm told that <smir>/<rmir> are backwards in the terminal from the
3010 # manual and from the ANSI standard, this describes the actual
3011 # terminal. I've never actually used a vt132 myself, so this
3016 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
3017 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
3019 # This vt220 description maps F5--F9 to the second block of function keys
3020 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
3021 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
3022 # PF1--PF4 are used as F1--F4.
3025 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
3026 OTbs, OTpt, am, mir, msgr, xenl, xon,
3027 cols#80, lines#24, vt#3,
3029 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3030 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3031 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3032 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
3033 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
3034 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
3035 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
3036 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3037 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
3038 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
3039 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
3040 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
3041 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
3042 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
3043 rmso=\E[27m, rmul=\E[24m,
3044 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3045 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3046 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3047 smso=\E[7m, smul=\E[4m,
3049 # A much better description of the VT200/220; used to be vt220-8
3050 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
3051 # designation to accommodate bug in pcvt -TD
3053 # Here's a picture of the VT220 editing keypad:
3054 # +--------+--------+--------+
3055 # | Find | Insert | Remove |
3056 # +--------+--------+--------+
3057 # | Select | Prev | Next |
3058 # +--------+--------+--------+
3059 vt220|vt200|dec vt220,
3060 OTbs, am, mir, msgr, xenl, xon,
3061 cols#80, it#8, lines#24, vt#3,
3062 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3063 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
3064 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3065 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3066 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3067 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3068 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3069 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3070 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3071 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3072 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
3073 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
3074 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3075 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3076 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3077 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
3078 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3079 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3080 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
3081 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
3083 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3084 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3085 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
3087 vt220-w|vt200-w|DEC vt220 in wide mode,
3089 rs3=\E[?3h, use=vt220,
3090 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
3091 OTbs, am, mc5i, mir, msgr, xenl, xon,
3092 cols#80, it#8, lines#24, vt#3,
3093 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3094 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
3095 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
3096 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
3097 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
3098 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3099 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
3100 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
3101 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
3102 il=\233%p1%dL, il1=\233L, ind=\ED,
3103 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
3104 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
3105 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
3106 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
3107 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
3108 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3109 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
3110 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
3111 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
3112 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
3113 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
3114 rmul=\23324m, rs1=\233?3l, sc=\E7,
3115 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3116 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
3117 smso=\2337m, smul=\2334m, tbc=\2333g,
3120 # This vt220 description regards F6--F10 as the second block of function keys
3121 # at the top of the keyboard. This mapping follows the description given
3122 # in the VT220 Programmer Reference Manual and agrees with the labeling
3123 # on some terminals that emulate the vt220. There is no support for an F5.
3124 # See vt220 for an alternate mapping.
3126 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
3127 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3128 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3129 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
3130 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
3132 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
3134 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3136 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
3137 # (not an official DEC entry!)
3138 # The problem with real vt220 terminals is they don't send escapes when in
3139 # in vt220 mode. This can be gotten around two ways. 1> don't send
3140 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
3141 # features of vt100 advanced video which it then has.
3143 # This entry takes the view of putting a vt220 into vt100 mode so
3144 # you can use the escape key in emacs and everything else which needs it.
3146 # You probably don't want to use this on a VMS machine since VMS will think
3147 # it has a vt220 and will get fouled up coming out of emacs
3149 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
3150 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
3152 vt200-js|vt220-js|dec vt200 series with jump scroll,
3155 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3156 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3157 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
3158 ht=^I, il1=\E[L, ind=\ED,
3159 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
3160 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3161 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
3162 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
3163 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
3164 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
3165 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
3167 # This was DEC's vt320. Use the purpose-built one below instead
3168 #vt320|DEC VT320 in vt100 emulation mode,
3171 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
3173 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
3175 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3177 # These entries are not DEC's official ones, they were purpose-built for the
3178 # VT320. Here are the designer's notes:
3179 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
3180 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
3181 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
3182 # Things that use <knxt> usually use tab anyways... and things that don't use
3183 # tab usually use <knxt> instead...
3184 # kprv is same as tab - Backtab is useless...
3185 # I left out <sgr> because of its RIDICULOUS complexity,
3186 # and the resulting fact that it causes the termcap translation of the entry
3187 # to SMASH the 1k-barrier...
3188 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3189 # (vt320: uncommented <fsl> --esr)
3190 vt320|vt300|dec vt320 7 bit terminal,
3191 am, hs, mir, msgr, xenl,
3192 cols#80, lines#24, wsl#80,
3193 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3194 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3195 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3196 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3197 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3198 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3199 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3200 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
3201 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
3202 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3203 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3204 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
3205 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3206 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3207 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3208 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
3209 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
3210 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3211 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3213 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3215 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3216 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3217 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3218 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
3219 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
3221 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3222 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3224 # We have to init 132-col mode, not 80-col mode.
3225 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
3227 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3228 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3230 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
3232 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3233 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3236 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
3237 # which are pretty much a superset of the VT320. They have the
3238 # host writable status line, yet another different DRCS matrix size,
3239 # and such, but they add the DEC Technical character set, Multiple text
3240 # pages, selectable length pages, and the like. The difference between
3241 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
3242 # monitor, the former has 4 planes and a color monitor. These terminals
3243 # support VT131 and ANSI block mode, but as with much of these things,
3244 # termcap/terminfo doesn't deal with these features.
3246 # Note that this entry is are set up in what was the standard way for GNU
3247 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3248 # keys were switched into application mode at the same time the numeric pad
3249 # is switched into application mode. This changes the definitions of the
3250 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3251 # your termcap or terminfo entry,
3253 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3254 # (vt340: string capability "sb=\E[M" corrected to "sr";
3255 # also, added <rmam>/<smam> based on the init string -- esr)
3256 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
3257 am, eslok, hs, mir, msgr, xenl, xon,
3258 cols#80, it#8, lines#24, vt#3,
3259 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3260 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3261 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3262 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
3263 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3264 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
3265 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
3266 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3267 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
3269 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3270 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3271 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3272 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3273 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3274 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3275 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3276 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
3277 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3278 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3279 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3280 tsl=\E[2$~\E[1$}\E[1;%dH,
3282 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
3283 # (originally written with vt420 as its primary name, and usable for it).
3285 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
3286 # text pages and long text pages with selectable length of the vt340, along
3287 # with left and right margins, rectangular area text copy, fill, and erase
3288 # operations, selected region character attribute change operations,
3289 # page memory and rectangle checksums, insert/delete column, reception
3290 # macros, and other features too numerous to remember right now. TERMCAP
3291 # can only take advantage of a few of these added features.
3293 # Note that this entry is are set up in what was the standard way for GNU
3294 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3295 # keys were switched into application mode at the same time the numeric pad
3296 # is switched into application mode. This changes the definitions of the
3297 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3298 # your termcap entry,
3300 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3301 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
3302 # also, added <rmam>/<smam> based on the init string -- esr)
3303 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
3304 am, eslok, hs, mir, msgr, xenl, xon,
3305 cols#80, it#8, lines#24, vt#3,
3306 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3307 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3308 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
3309 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3310 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3311 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3312 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3313 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
3314 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3315 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3316 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3317 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3318 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3319 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3320 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3321 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3322 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3323 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3324 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
3325 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3326 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3327 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3328 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
3330 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
3331 # a missing <sc> -- esr)
3332 # add msgr and other capabilities from vt220 -TD
3334 am, mir, msgr, xenl, xon,
3335 cols#80, it#8, lines#24, vt#3,
3336 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3337 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3338 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3339 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3340 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3341 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
3342 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3343 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
3344 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
3345 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3346 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3347 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3348 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
3349 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
3350 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
3351 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
3352 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
3353 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3354 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3355 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3356 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3357 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3358 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3359 use=ansi+pp, use=dec+sl, use=ansi+enq,
3361 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3362 # takes two parameters, the key and the string. Translating the key is
3363 # straightforward (keys 1-5 are not defined on real terminals, though some
3364 # emulators define these):
3366 # if (key < 16) then value = key;
3367 # else if (key < 21) then value = key + 1;
3368 # else if (key < 25) then value = key + 2;
3369 # else if (key < 27) then value = key + 3;
3370 # else if (key < 30) then value = key + 4;
3371 # else value = key + 5;
3373 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3374 # There's no provision in terminfo for emitting a string in this format, so the
3375 # application has to know it.
3377 vt420pc|DEC VT420 w/PC keyboard,
3378 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
3379 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
3380 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
3381 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
3382 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
3383 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
3384 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
3385 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
3386 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
3387 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
3388 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
3389 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
3390 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3391 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3392 pctrm=USR_TERM\:vt420pcdos\:,
3393 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
3396 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3398 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
3400 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3401 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3403 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3404 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3405 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3406 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3407 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3408 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3409 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3414 vt510pc|DEC VT510 w/PC keyboard,
3416 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3421 # The VT520 is a monochrome text terminal capable of managing up to
3422 # four independent sessions in the terminal. It has multiple ANSI
3423 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3424 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3425 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3427 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3428 # [Alt]/[Print Screen] depending upon which keyboard and which
3429 # terminal mode is being used. If Set-Up has been disabled or
3430 # assigned to an unknown key, Set-Up may be entered by pressing
3431 # [F3] as the first key after power up, regardless of keyboard type.
3433 use=ansi+rca, use=vt420, use=ansi+tabs,
3438 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3439 # Keyboard, which replaces the old LK41R-AA keyboard.
3441 # In trying to get the function keys to work, I had to cobble my own
3442 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3443 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3444 # I seem to get them all -Mike Gran
3445 vt520ansi|Boundless VT520 ANSI,
3446 use=ansi+rca, use=vt420f, use=vt220+keypad,
3449 #### VT100 emulations
3452 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3453 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3454 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3455 # that this works best with a stock vt100 entry.
3456 dec-vt100|EWAN telnet's vt100 emulation,
3459 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3460 dec-vt220|DOS tnvt200 terminal emulator,
3463 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3464 # anyone who needs PC VT340 emulation. (or anything below that level, for
3465 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3466 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
3467 # I can send the address if requested.
3468 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3469 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3470 z340|zstem vt340 terminal emulator 132col 42line,
3472 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3473 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3475 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
3477 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3478 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3481 # CRT is shareware. It implements some xterm features, including mouse.
3482 crt|crt-vt220|CRT 2.3 emulating VT220,
3485 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3487 # PuTTY 0.55 (released 3 August 2004)
3488 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3490 # Comparing with 0.51, vttest is much better (only a few problems with the
3491 # cursor position reports and wrapping).
3493 # PuTTY 0.51 (released 14 December 2000)
3495 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3496 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3497 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3498 # to xterm, which is incorrect, since several features are misimplemented:
3500 # Alt+key always sends ESC+key, so 'km' capability is removed.
3502 # Control responses, wrapping and tabs are buggy, failing a couple of
3503 # screens in vttest.
3505 # xterm mouse support is not implemented (unrelease version may).
3507 # Several features such as backspace/delete are optional; this entry documents
3508 # the default behavior -TD
3510 putty|PuTTY terminal emulator,
3511 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3512 colors#8, it#8, ncv#22, pairs#64, U8#1,
3513 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3514 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3515 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
3516 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3517 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3518 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3519 dch=\E[%p1%dP, dch1=\E[P,
3520 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
3521 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3522 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
3523 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
3524 ind=^J, indn=\E[%p1%dS,
3525 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
3526 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3527 kLFT=\EOD, kRIT=\EOC, kb2=\E[G, kbs=\177, kcbt=\E[Z,
3528 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3529 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
3530 kind=\EOB, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\EOA,
3531 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
3532 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
3533 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
3534 rmso=\E[27m, rmul=\E[24m,
3535 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3536 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3537 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3538 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3539 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3540 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
3541 tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J, use=putty+fnkeys,
3542 use=vt102+enq, use=xterm+sl,
3543 vt100-putty|Reset PuTTY to pure vt100,
3544 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3546 # palette is hardcoded...
3547 putty-256color|PuTTY 0.58 with xterm 256-colors,
3548 use=xterm+256setaf, use=putty,
3550 # One of the keyboard selections is "VT100+".
3551 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3552 putty-vt100|VT100+ keyboard layout,
3553 use=putty+fnkeys+vt100, use=putty,
3555 putty-sco|putty with SCO function keys,
3556 use=putty+fnkeys+sco, use=putty,
3558 # PuTTY has more than one section in its Keyboard configuration:
3559 # a) backspace/delete, which we ignore since that choice largely depends on
3560 # whether one matches Unix and BSD or Linux.
3561 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
3562 # are unrelated to rxvt's actual settings.
3563 # c) function keys and keypad - this is the interesting part. None of the
3564 # selections match any of their respective namesakes, but they are shown
3565 # here to help users who expect that the selections do what is implied.
3567 # This is the default setting for PuTTY
3568 putty+fnkeys|fn-keys for PuTTY,
3569 use=putty+fnkeys+esc,
3571 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
3572 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3573 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3574 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3575 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3576 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3578 putty+fnkeys+linux|Linux fn-keys for PuTTY,
3579 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3580 use=putty+fnkeys+esc,
3582 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
3583 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3584 use=putty+fnkeys+esc,
3586 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
3587 use=putty+fnkeys+esc,
3589 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
3591 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
3592 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3593 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3594 kf9=\EOX, use=putty+fnkeys+esc,
3596 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3598 # Use modifiers to obtain function keys past 12:
3601 # F25-F36 - control/alt
3602 # F37-F48 - control/shift
3604 putty+fnkeys+sco|SCO fn-keys for PuTTY,
3605 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3606 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3607 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3608 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3609 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3610 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3611 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3612 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3613 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3614 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3615 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3616 kich1=\E[L, knp=\E[G, kpp=\E[I,
3618 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3619 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3620 # (communication program) which supports:
3622 # - Serial port connections.
3623 # - TCP/IP (telnet) connections.
3624 # - VT100 emulation, and selected VT200/300 emulation.
3625 # - TEK4010 emulation.
3626 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3628 # - Scripts using the "Tera Term Language".
3629 # - Japanese and Russian character sets.
3631 # The program does not come with terminfo or termcap entries. However, the
3632 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3633 # vt52 or doublesize character support; blinking is done with color). Besides
3634 # the HPA, VPA extensions it also implements CPL and CNL.
3636 # All of the function keys can be remapped. This description shows the default
3637 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3638 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3639 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3647 # ANSI colors are implemented, but cannot be combined with video attributes
3648 # except for reverse.
3650 # No fonts are supplied with the program, so the acsc string is chosen to
3651 # correspond with the default Microsoft terminal font.
3653 # Tera Term recognizes some xterm sequences, including those for setting and
3654 # retrieving the window title, and for setting the window size (i.e., using
3655 # "resize -s"), though it does not pass SIGWINCH to the application if the
3656 # user resizes the window with the mouse.
3657 teraterm2.3|Tera Term Pro,
3660 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3661 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3662 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3663 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3664 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3665 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3666 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3667 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3668 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3669 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3670 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3671 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3672 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3673 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3674 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3675 use=klone+color, use=vt100,
3677 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3678 # to choose a Windows OEM font).
3680 # Testing with tack:
3681 # - it does not have xenl (suppress that)
3682 # - underline seems to work with color (modify ncv).
3683 # Testing with vttest:
3684 # - wrapping differs from vt100 (menu 1).
3685 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
3687 # - it recognizes the dtterm window controls for reporting size in
3688 # characters and pixels.
3689 # - it passes SIGWINCH.
3690 teraterm4.59|Tera Term Pro,
3693 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3694 kmous=\E[M, use=teraterm2.3,
3699 # Tested with WinNT 4.0, the telnet application assumes the screensize is
3700 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
3703 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3704 # for casual (occasional) use. Also fails several of the vttest screens,
3705 # but that is not unusual for vt100 "emulators".
3706 # b) Does not implement vt100 keypad
3707 # c) Recognizes a subset of vt52 controls.
3708 ms-vt100|MS telnet imitating dec vt100,
3710 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3711 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3712 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3714 # Tested with Windows 2000, the telnet application runs in a console window,
3715 # also using 'Terminal' font.
3718 # a) This version has no function keys or numeric keypad. Unlike the older
3719 # version, the numeric keypad is entirely ignored.
3720 # b) The program sets $TERM to "ansi", which of course is inaccurate.
3721 ms-vt100-color|vtnt|windows 2000 ansi (sic),
3723 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3726 # Based on comments from Federico Bianchi:
3728 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3729 # scheme for PF keys.
3731 # and PuTTY wishlist:
3733 # The modifiers are represented as the codes listed above, prefixed to
3734 # the normal sequences. If the modifier is pressed alone, its sequence
3735 # is transmitted twice in succession. If multiple modifiers apply,
3736 # they're transmitted in the order shift, control, alt.
3741 ms-vt100+|vt100+|windows XP vt100+ (sic),
3742 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3743 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3744 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3745 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3746 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3747 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3748 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3749 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3750 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3751 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3752 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3753 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3754 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3755 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3756 knp=\E/, kpp=\E?, use=ms-vt100-color,
3758 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3761 # expect-5.44.1.15/example/tkterm
3762 # a minimal subset of a vt100 (compare with "news-unk).
3764 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3765 tt|tkterm|Don Libes' tk text widget terminal emulator,
3766 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3767 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
3768 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3769 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3772 ######## X TERMINAL EMULATORS
3775 # You can add the following line to your .Xdefaults to change the terminal type
3776 # set by the xterms you start up to my-xterm:
3778 # *termName: my-xterm
3780 # System administrators can change the default entry for xterm instances
3781 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
3782 # case, xterm will detect and reject an invalid terminal type, falling back
3783 # to the default of xterm.
3786 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
3787 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
3788 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
3789 # as these seem not to work -- esr)
3790 x10term|vs100-x10|xterm terminal emulator (X10 window system),
3791 OTbs, am, km, mir, msgr, xenl, xon,
3792 cols#80, it#8, lines#65,
3793 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
3794 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3795 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3796 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
3797 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
3798 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3799 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
3800 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3801 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
3802 smso=\E[7m, smul=\E[4m,
3803 # Compatible with the R5 xterm
3804 # (from the XFree86 3.2 distribution, <blink=@> removed)
3805 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
3806 # corrected typos in rs2 string - TD
3808 xterm-r5|xterm R5 version,
3809 OTbs, am, km, msgr, xenl,
3810 cols#80, it#8, lines#24,
3811 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3812 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3813 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3814 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3815 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3816 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3817 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3818 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
3819 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
3820 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3821 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3822 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
3823 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
3824 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3826 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
3828 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
3829 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
3830 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3831 # Compatible with the R6 xterm
3832 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
3833 # added khome/kend, hts based on the R6 xterm code - TD
3834 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
3835 # for compatibility with other emulators).
3836 xterm-r6|xterm X11R6 version,
3837 OTbs, am, km, mir, msgr, xenl,
3838 cols#80, it#8, lines#24,
3839 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3840 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3841 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3842 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3843 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3844 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3845 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
3847 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
3848 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3849 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3850 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3851 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3852 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3853 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3854 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3855 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
3856 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3857 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3858 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
3859 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3860 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3862 xterm-old|antique xterm version,
3864 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
3865 # The name has been changed and some aliases have been removed.
3866 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
3867 OTbs, am, bce, km, mir, msgr, xenl, XT,
3868 cols#80, it#8, lines#24, ncv@,
3869 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3870 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3871 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3872 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3873 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3874 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3875 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3876 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3877 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3878 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3880 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3881 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3882 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
3883 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3884 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3885 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
3886 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3887 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
3888 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
3889 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3890 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3891 rmso=\E[27m, rmul=\E[24m, rs1=^O,
3892 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
3893 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3894 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3895 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3896 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3897 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3898 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3899 use=ecma+color, use=vt220+keypad,
3901 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
3902 # codes for F1-F4 except while in VT220 mode.
3903 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
3904 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3906 # This version was released in XFree86 3.3.3 (November 1998).
3907 # Besides providing printer support, it exploits a new feature that allows
3908 # xterm to use terminfo-based descriptions with the titeInhibit resource.
3909 # -- the distribution contained incorrect khome/kend values -TD
3910 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
3911 blink=\E[5m, ich1@, invis=\E[8m,
3912 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
3913 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
3914 rs2=\E[!p\E[?3;4l\E[4l\E>,
3915 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3916 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
3919 # This version was released in XFree86 4.0.
3920 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
3922 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
3923 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
3924 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
3925 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3926 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3927 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3928 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3929 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
3930 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
3931 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3932 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3933 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3934 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3935 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3936 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3937 smcup=\E[?1049h, use=xterm-xf86-v333,
3939 # This version was released in XFree86 4.3.
3940 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3941 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3942 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3944 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3947 # This version was released in XFree86 4.4.
3948 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3949 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3950 rin=\E[%p1%dT, use=xterm-xf86-v43,
3952 xterm-xfree86|xterm terminal emulator (XFree86),
3955 # This version reflects the current xterm features.
3956 xterm-new|modern xterm terminal emulator,
3958 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
3959 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
3962 # This fragment is for people who cannot agree on what the backspace key
3964 xterm+kbs|fragment for backspace key,
3967 # This fragment describes as much of XFree86 xterm's "pc-style" function
3968 # keys as will fit into terminfo's 60 function keys.
3971 # ---------------------------------
3978 # 8 Shift + Alt + Control
3979 # ---------------------------------
3980 # The meta key may also be used as a modifier in this scheme, adding another
3981 # bit to the parameter.
3982 xterm+pcfkeys|fragment for PC-style fkeys,
3983 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3986 xterm+noapp|fragment with cursor keys in normal mode,
3987 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3990 xterm+app|fragment with cursor keys in application mode,
3991 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3994 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3995 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3996 # the earlier scheme, as noted in the "use=" clauses in this file.
3998 # The original assignments from patch #94 for cursor-keys had some technical
4001 # A parameter for a function-key to represent a modifier is just more
4002 # bits. But for a cursor-key it may change the behavior of the
4003 # application. For instance, emacs decodes the first parameter of a
4004 # cursor-key as a repeat count.
4006 # A parameterized string should (really) not begin with SS3 (\EO).
4007 # Rather, CSI (\E[) should be used.
4009 # For these reasons, the original assignments were deprecated. For
4010 # compatibility reasons, they are still available as a setting of xterm's
4011 # modifyCursorKeys resource. These fragments list the modified cursor-keys
4012 # that might apply to xterm+pcfkeys with different values of that resource.
4013 xterm+pcc3|fragment with modifyCursorKeys:3,
4014 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
4015 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
4016 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
4017 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
4018 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
4019 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
4020 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
4021 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
4024 xterm+pcc2|fragment with modifyCursorKeys:2,
4025 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
4026 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
4027 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
4028 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
4029 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
4030 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
4031 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
4033 xterm+pcc1|fragment with modifyCursorKeys:1,
4034 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
4035 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
4036 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
4037 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
4038 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
4039 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
4041 xterm+pcc0|fragment with modifyCursorKeys:0,
4042 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
4043 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
4044 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
4045 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
4046 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
4047 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4050 # Here are corresponding fragments from xterm patch #216:
4052 xterm+pcf0|fragment with modifyFunctionKeys:0,
4053 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4054 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4055 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4056 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4057 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4058 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4059 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4060 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4061 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4062 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4063 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4064 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4065 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4066 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4067 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4068 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4069 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4071 xterm+pcf2|fragment with modifyFunctionKeys:2,
4072 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4073 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4074 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4075 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4076 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4077 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4078 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4079 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4080 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4081 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4082 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4083 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4084 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4085 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4086 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4087 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4088 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4089 kf8=\E[19~, kf9=\E[20~,
4091 # Chunks from xterm #230:
4092 xterm+pce2|fragment with modifyCursorKeys:2,
4093 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4094 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4095 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4096 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4097 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4098 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4099 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4100 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4101 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4102 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4103 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4106 xterm+edit|fragment for 6-key editing-keypad,
4107 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4110 xterm+pc+edit|fragment for pc-style editing keypad,
4111 kend=\E[4~, khome=\E[1~,
4113 xterm+vt+edit|fragment for vt220-style editing keypad,
4114 kfnd=\E[1~, kslt=\E[4~,
4117 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
4118 # Alternatively, the same scheme with old-style function keys as in xterm-r6
4119 # is shown here (because that is used in mrxvt and mlterm):
4120 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
4121 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
4122 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
4123 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
4124 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
4125 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
4126 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
4127 kf63=\E[13;4~, use=xterm+pcf2,
4129 # This chunk is used for building the VT220/Sun/PC keyboard variants.
4130 xterm-basic|modern xterm terminal emulator - common,
4131 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
4132 colors#8, cols#80, it#8, lines#24, pairs#64,
4133 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4134 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4135 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
4136 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4137 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4138 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4139 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
4140 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4141 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
4142 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4143 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
4144 is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
4145 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4146 ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4147 rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m,
4148 rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
4149 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4150 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4151 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4152 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
4153 sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
4154 smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
4155 smm=\E[?1034h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4156 vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+pp, use=xterm+kbs,
4159 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
4160 # In retrospect, something like xterm-r6 was intended here -TD
4161 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
4162 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
4164 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
4165 # If configured to support 88- or 256-colors (which is fairly common in 2009),
4166 # xterm also recognizes the control sequences for initc -TD
4167 xterm-16color|xterm with 16 colors like aixterm,
4169 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4170 use=ibm+16color, use=xterm-new,
4172 # 256-colors is a compile-time feature of XFree86 xterm beginning with
4173 # patch #111 (1999/7/10) -TD
4174 xterm+256color|xterm 256-color feature,
4176 colors#256, pairs#32767,
4177 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4178 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
4179 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
4182 xterm+256setaf|xterm 256-color (set-only),
4184 colors#256, pairs#32767,
4186 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
4187 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
4190 # 88-colors is a compile-time feature of XFree86 xterm beginning with
4191 # patch #115 (1999/9/18) -TD
4193 # Note that the escape sequences used are the same as for 256-colors - xterm
4194 # has a different table of default color resource values. If built for
4195 # 256-colors, it can still handle an 88-color palette by using the initc
4198 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
4199 # which support the xterm+256color feature support the associated initc
4200 # capability. So it is cancelled in the entries which use this and/or the
4201 # xterm+256color block.
4203 # The default color palette for the 256- and 88-colors are different. A
4204 # given executable will have one palette (perhaps compiled-in). If the program
4205 # supports xterm's control sequence, it can be programmed using initc.
4206 xterm+88color|xterm 88-color feature,
4207 colors#88, pairs#7744, use=xterm+256color,
4209 # These variants of XFree86 3.9.16 xterm are built as a configure option.
4210 xterm-256color|xterm with 256 colors,
4211 use=xterm+256color, use=xterm-new,
4212 xterm-88color|xterm with 88 colors,
4213 use=xterm+88color, use=xterm-256color,
4215 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
4216 # asked for some of xterm's advanced features to be added to its terminfo
4217 # entry. It defines extended capabilities not found in standard terminfo or
4218 # termcap. These are useful in tmux, for instance, hence the name.
4220 # One caveat in adding extended capabilities in ncurses is that if the names
4221 # are longer than two characters, then they will not be visible through the
4222 # termcap interface.
4224 # Ms modifies the selection/clipboard. Its parameters are
4225 # p1 = the storage unit (clipboard, selection or cut buffer)
4226 # p2 = the base64-encoded clipboard content.
4228 # Ss is used to set the cursor style as described by the DECSCUSR
4229 # function to a block or underline.
4230 # Se resets the cursor style to the terminal power-on default.
4232 # Cs and Cr set and reset the cursor colour.
4233 xterm+tmux|advanced xterm features used in tmux,
4234 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
4235 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
4237 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
4238 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
4239 # To use it, your decTerminalID resource must be set to 200 or above.
4246 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
4247 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
4248 colors#8, cols#80, it#8, lines#24, pairs#64,
4249 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4250 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
4251 civis=\233?25l, clear=\233H\2332J,
4252 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
4253 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
4254 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
4255 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
4256 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
4257 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
4258 flash=\233?5h$<100/>\233?5l, home=\233H,
4259 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
4260 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
4261 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
4262 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
4263 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
4264 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
4265 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
4266 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
4267 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
4268 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
4269 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
4270 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
4271 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
4272 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
4273 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
4274 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
4276 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
4277 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
4278 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4279 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4280 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
4281 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
4282 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
4283 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
4284 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
4287 xterm-hp|xterm with hpterm function keys,
4288 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
4289 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
4290 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
4291 knp=\ES, kpp=\ET, use=xterm-basic,
4293 xterm-sco|xterm with SCO function keys,
4294 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4295 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4296 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4297 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4298 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4299 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4300 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4301 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4302 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4303 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4304 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4305 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
4308 # The xterm-new description has all of the features, but is not completely
4309 # compatible with vt220. If you are using a Sun or PC keyboard, set the
4310 # sunKeyboard resource to true:
4311 # + maps the editing keypad
4312 # + interprets control-function-key as a second array of keys, so a
4313 # 12-fkey keyboard can support vt220's 20-fkeys.
4314 # + maps numeric keypad "+" to ",".
4315 # + uses DEC-style control sequences for the application keypad.
4317 xterm-vt220|xterm emulating vt220,
4318 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4319 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4320 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4321 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
4322 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4323 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4324 use=xterm+app, use=xterm+edit, use=xterm-basic,
4327 xterm-vt52|xterm emulating dec vt52,
4328 cols#80, it#8, lines#24,
4329 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4330 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
4331 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
4332 home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4333 kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
4336 xterm-noapp|xterm with cursor keys in normal mode,
4337 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
4340 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
4341 lines#24, use=xterm-old,
4343 # This is xterm for ncurses.
4344 xterm|xterm terminal emulator (X Window System),
4347 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
4348 # setting the vt100Graphics resource to false.
4349 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
4352 # These building-blocks allow access to the X titlebar and icon name as a
4353 # status line. There are a few problems in using them in entries:
4355 # a) tsl should have a parameter to denote the column on which to transfer to
4357 # b) the "0" code for xterm updates both icon-title and window title. Some
4358 # window managers such as twm (and possibly window managers descended from
4359 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
4360 # don't want to mess with icon-name when using those window managers.
4362 # The extension "TS" is preferable, because it does not accept a parameter.
4363 # However, if you are using a non-extended terminfo, "TS" is not visible.
4364 xterm+sl|access X title line and icon name,
4366 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
4367 xterm+sl-twm|access X title line (pacify twm-descended window managers),
4369 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
4371 # In contrast, this block can be used for a DEC vt320 and up. There are two
4374 # DECSASD (select active status display)
4375 # \E[0$} Main display
4376 # \E[1$} Status line
4378 # DECSSDT (select status line type)
4379 # \E[0$~ No status line
4380 # \E[1$~ Indicator status line
4381 # \E[2$~ Host-writable status line
4383 # The building block assumes that the terminal always shows something at the
4384 # status line (either the indicator, or status line). That is because if no
4385 # status line is used, then the terminal makes that line part of the user
4386 # window, changing its size without notice.
4388 # Because there is no "esl" (enable status line) capability, the "tsl"
4389 # capability ensures that the status line is host-writable. A DEC terminal
4390 # will clear the status line when changing from indicator to host-writable
4393 # Once on the status line, the row part of cursor addressing is ignored. Since
4394 # tsl expects a parameter (to specify the column), the shortest addressing that
4395 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
4397 dec+sl|DEC VTxx status line,
4399 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
4402 # The following xterm variants don't depend on your base version
4404 # xterm with bold instead of underline
4405 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
4406 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|%t;7%;m,
4407 smso=\E[7m, smul=\E[1m, use=xterm-old,
4409 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
4410 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
4411 ich@, ich1@, use=xterm,
4412 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
4413 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
4414 rmcup@, smcup@, use=xterm,
4417 # The xterm mouse protocol is used by other terminal emulators.
4418 # In this section, two extended capabilities are used to illustrate the mouse
4419 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
4420 # enabling/disabling other mouse protocols. The "xm" capability describes the
4421 # mouse response; currently there is no interpreter which would use this
4422 # information to make the mouse support completely data-driven.
4424 # Here is the "original" xterm mouse protocol.
4426 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
4427 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
4428 # sequence", referring to the fact that it does not correspond to a "real"
4429 # terminal. The mouse responses for the X10 protocol are sent only for
4431 xterm+x10mouse|X10 xterm mouse protocol,
4432 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
4433 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
4434 xterm-x10mouse|X10 xterm mouse,
4435 use=xterm+x10mouse, use=xterm,
4437 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
4440 # The mouse responses for the X11 protocol covered button releases, as well as
4443 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
4446 # The modifiers are not reflected in this description because as used in xterm
4447 # they are normally inaccessible because the translations resources assign
4448 # shift and control to other features. However, they are important because
4449 # they take up space in the first byte of the response. The other bits of this
4450 # byte are used to encode the button number for both presses and releases.
4451 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
4452 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
4453 # provide additional features, e.g., wheel mouse.
4455 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
4456 # "t" or "T", which was activated by double-clicking. The "t" response was
4457 # used when the starting/ending positions were the same.
4459 # X11R3 (February 1988) added the highlight/tracking mode.
4461 # X11R4 (December 1989) added the control sequences document, listing the
4462 # control sequences for the X10/X11 protocols without descriptions. It also
4463 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
4464 # X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal.
4466 # X11R5 (November 1993) gave a description of the mouse protocol.
4468 # X11R6 (January 1995) moved the control sequences document out of the xterm
4469 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
4470 # no new information.
4471 xterm+x11mouse|X11 xterm mouse protocol,
4472 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
4473 xm=\E[M%?%p4%t3%e%p3%' '%+%c%;%p2%'!'%+%c%p1%'!'%+%c,
4474 xterm-x11mouse|X11 mouse,
4475 use=xterm+x11mouse, use=xterm,
4477 # Here is a suggested description of the xterm highlighting protocol.
4478 # A more complicated example could be constructed to account for the "t"
4480 xterm+x11hilite|X11 xterm mouse protocol with highlight,
4481 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
4482 xm=\E[%p7%'!'%+%p6%'!'%+%c%p9%'!'%+%c%p8%'!'%+%c%p2%'!'%+%c%p1%'!'%+%cT,
4483 xterm-x11hilite|X11 mouse with highlight,
4484 use=xterm+x11mouse, use=xterm,
4486 # The preceding were the sources from X Consortium. Other sources (or patches)
4487 # were available. Starting in mid-1995, XFree86 developers collected some of
4488 # those changes and began improvements, e.g., to support color. This was, by
4489 # the way, around the same time that rxvt developers began implementing color,
4490 # though dates (and attributions) are not well documented. I became interested
4491 # in xterm in late 1995, and involved in early 1996. To complete the picture,
4492 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
4494 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
4495 # "any-event" mouse mode.
4496 xterm+sm+1002|xterm any-event mouse,
4497 kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
4498 xterm-1002|xterm any-event mouse,
4499 use=xterm+sm+1002, use=xterm,
4501 xterm+sm+1003|testing xterm-mouse,
4502 kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
4504 xterm-1003|testing xterm-mouse,
4505 use=xterm+sm+1003, use=xterm,
4507 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
4510 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
4511 # dropping support for the X11 mouse protocol's shift-modifier and using
4512 # available bits in the first byte of the response to encode buttons 4 and 5.
4513 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
4514 # older configurations which might have used the obsolete modifiers.
4516 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
4517 # where the coordinates in the mouse response would be encoded in UTF-8,
4518 # thereby extending the range of coordinates past 222=(255-33). This is the
4519 # "1005" mouse mode.
4520 xterm+sm+1005|xterm UTF-8 mouse,
4521 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
4522 xm=\E[M%?%p4%t3%e%p3%' '%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
4523 xterm-1005|xterm UTF-8 mouse,
4524 use=xterm+sm+1005, use=xterm,
4526 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
4527 # SGR-style parameters.
4529 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
4530 # (By the way, this is a problem with the X11 protocol). A more plausible
4531 # criticism is that the responses provided by the 1005 mode are not distinct
4532 # from the non-1005 responses.
4534 # As an alternative (and fixing the longstanding limitation of X11 mouse
4535 # protocol regarding button-releases), I provided this:
4536 xterm+sm+1006|xterm SGR-mouse,
4537 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
4538 xm=\E[<%p1%d;%p2%d;%p3%d;%?%p4%tM%em%;,
4539 xterm-1006|xterm SGR-mouse,
4540 use=xterm+sm+1006, use=xterm,
4543 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
4544 # (kterm should not invoke DEC Graphics as the alternate character set
4545 # -- Kenji Rikitake)
4546 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
4547 # -- MATSUMOTO Shoji)
4548 # kterm implements acsc via built-in table of X Drawable's
4549 kterm|kterm kanji terminal emulator (X window system),
4552 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
4553 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
4554 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
4555 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
4556 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
4557 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
4558 kterm-color|kterm-co|kterm with ANSI colors,
4559 ncv@, use=kterm, use=ecma+color,
4562 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
4563 # variant of xterm which is apparently no longer supported, but are interesting
4564 # because they illustrate SVr4 curses mouse controls - T.Dickey
4565 xtermm|xterm terminal emulator (monocrome),
4566 OTbs, am, km, mir, msgr, xenl,
4567 btns#3, cols#80, it#8, lines#24,
4568 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4569 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4570 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4571 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4572 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4573 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4574 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
4575 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4576 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
4577 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
4578 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
4579 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
4580 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
4581 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
4582 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4583 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4584 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4585 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
4586 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
4588 xtermc|xterm terminal emulator (color),
4589 colors#8, ncv#7, pairs#64,
4590 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4591 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4592 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4595 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
4596 # Here's a termcap entry I've been using for xterm_color, which comes
4597 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
4598 # color stuff, I also have a status line defined as the window manager
4599 # title bar. [I have translated it to terminfo -- ESR]
4600 xterm-pcolor|xterm with color used for highlights and status line,
4602 bold=\E[1;43m, rev=\E[7;34m,
4603 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
4604 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
4606 # This describes the capabilities of color_xterm, an xterm variant from
4607 # before ECMA-64 color support was folded into the main-line xterm release.
4608 # This entry is straight from color_xterm's maintainer.
4609 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
4610 # The README's with the distribution also say that it supports SGR 21, 24, 25
4611 # and 27, but they are not present in the terminfo or termcap.
4612 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
4613 OTbs, am, km, mir, msgr, xenl, XT,
4614 cols#80, it#8, lines#65, ncv@,
4615 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4616 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
4617 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4618 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4619 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4620 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4621 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
4622 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
4623 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
4624 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
4625 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
4626 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4627 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
4628 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
4629 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
4630 rmso=\E[27m, rmul=\E[24m,
4631 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
4633 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4634 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
4635 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
4636 smul=\E[4m, use=ecma+color, use=vt220+keypad,
4638 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
4639 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
4640 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
4641 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
4642 # that each of those implements the home, end, delete keys differently.
4644 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
4645 # colors; note that this is not compatible with the 5.2 version.
4646 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
4647 # match XFree86's xterm.terminfo usage and prevent circular links
4648 xterm-color|nxterm|generic color xterm,
4650 op=\E[m, use=xterm-r6, use=klone+color,
4652 # This entry describes an xterm with Sun-style function keys enabled
4653 # via the X resource setting "xterm*sunFunctionKeys:true"
4654 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
4655 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
4656 # because we want it to be seen as <kcpy>.
4657 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
4658 # with their Sun keyboard labels instead.
4659 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
4660 xterm-sun|xterm with sunFunctionKeys true,
4661 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
4662 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
4663 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
4664 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
4665 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
4666 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
4667 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
4668 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
4669 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
4670 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
4671 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
4672 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
4674 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
4675 cols#80, lines#24, use=xterm-sun,
4678 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
4679 gnome-rh62|Gnome terminal,
4681 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4684 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
4686 # This implements a subset of vt102 with a random selection of features from
4687 # other terminals such as color and function-keys.
4689 # shift-f1 to shift-f10 are f11 to f20
4691 # NumLock changes the application keypad to approximate vt100 keypad, except
4692 # that there is no escape sequence matching comma (,).
4694 # Other defects observed:
4695 # vt100 LNM mode is not implemented.
4696 # vt100 80/132 column mode is not implemented.
4697 # vt100 DECALN is not implemented.
4698 # vt100 DECSCNM mode is not implemented, so flash does not work.
4699 # vt100 TBC (tab reset) is not implemented.
4700 # xterm alternate screen controls do not restore cursor position properly
4701 # it hangs in tack after running function-keys test.
4702 gnome-rh72|GNOME Terminal,
4704 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
4705 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
4706 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
4707 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
4709 # GNOME Terminal 2.0.1 (Redhat 8.0)
4711 # Documentation now claims it implements vt220 (which is demonstrably false).
4712 # However, it does implement ECH, which is a vt220 feature. And there are
4713 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
4714 # more of its bugs using vttest.
4716 # However, note that bce and msgr are broken in this release. Tabs (tbc and
4717 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
4719 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
4720 # operations. Shift-tab generates a distinct sequence so it can be argued
4721 # that it implements kcbt.
4722 gnome-rh80|GNOME Terminal,
4724 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
4725 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
4727 # GNOME Terminal 2.2.1 (Redhat 9.0)
4729 # bce and msgr are repaired.
4730 gnome-rh90|GNOME Terminal,
4732 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
4733 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
4734 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
4737 # GNOME Terminal 2.14.2 (Fedora Core 5)
4738 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
4739 gnome-fc5|GNOME Terminal,
4741 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4742 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
4744 # GNOME Terminal 2.18.1 (2007 snapshot)
4746 # For any "recent" version of gnome-terminal, it is futile to attempt to
4747 # support modifiers on cursor- and keypad keys because the program usually
4748 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
4749 # of the keys (which more/less correspond to the termcap values), and will
4750 # interpret those according to the $TERM value, but others not in the
4751 # terminfo according to some constantly changing set of hacker guidelines -TD
4752 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
4753 use=xterm+pcc2, use=gnome-fc5,
4754 gnome-2007|GNOME Terminal snapshot 2.18.1,
4757 # GNOME Terminal 2.22.3 (2008 snapshot)
4759 # In vttest, it claims to be a vt220 with national replacement character-sets,
4760 # but aside from the identifier string, implements only a small fraction of
4761 # vt220's behavior, which will make it less usable on a VMS system (unclear
4762 # what the intent of the developer is, since the NRC feature exposed in vttest
4763 # by this change does not work).
4764 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
4765 use=vte+pcfkeys, use=vte-2007,
4766 gnome-2008|GNOME Terminal snapshot 2.22.3,
4769 # GNOME Terminal 3.6.0 (2012)
4770 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
4771 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
4774 # Testing with tack shows that flash does not/has not worked -TD
4775 vte-2012|VTE 0.34.1,
4777 dim=\E[2m, flash@, invis=\E[8m, ritm=\E[23m,
4778 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
4779 sitm=\E[3m, use=vte-2008,
4780 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
4781 # 61 differences from a correct entry for gnome terminal.
4782 gnome-2012|GNOME Terminal 3.6.0,
4785 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
4786 # supply key information which is not built into the program. With 2.22.3,
4787 # this list is built into the program (which addresses the inadvertant use of
4788 # random terminfo data, though using a set of values which does not correspond
4789 # to any that xterm produces - still not solving the problem that GNOME
4790 # terminal hardcodes the $TERM variable as "xterm").
4792 # terminfo modifier code keys
4793 # kf13-kf24 shift 2 F1 to F12
4794 # kf25-kf36 control 5 F1 to F12
4795 # kf37-kf48 shift/control 6 F1 to F12
4796 # kf49-kf60 alt 3 F1 to F12
4797 # kf61-kf63 shift-alt 4 F1 to F3
4799 # The parameters with \EO (SS3) are technically an error, since SS3 should have
4800 # no parameters. This appears to be rote copying based on xterm+pcc0.
4801 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
4802 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
4803 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
4804 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
4805 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
4806 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
4807 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
4809 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
4812 # deprecated - use "vte" for newer versions
4813 gnome|GNOME Terminal,
4816 # relevant changes were made in January 2014
4817 vte-2014|VTE 0.35.1,
4818 use=xterm+pcfkeys, use=vte-2012,
4820 vte|VTE aka GNOME Terminal,
4823 # palette is hardcoded...
4824 vte-256color|VTE with xterm 256-colors,
4825 use=xterm+256color, use=vte,
4826 gnome-256color|GNOME Terminal with xterm 256-colors,
4829 # XFCE Terminal 0.2.5.4beta2
4831 # This is based on some of the same source code, e.g., the VTE library, as
4832 # gnome-terminal, but has fewer features, fails more screens in vttest.
4833 # Since most of the terminfo-related behavior is due to the VTE library,
4834 # the terminfo is the same as gnome-terminal.
4839 # Multi-Gnome-Terminal 1.6.2
4841 # This does not use VTE, and does have different behavior (compare xfce and
4843 mgt|Multi GNOME Terminal,
4844 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
4847 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
4848 # or not is debatable).
4851 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
4854 # (formerly known as kvt)
4856 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
4857 # simplify this entry (and point out why konsole isn't xterm), we base this on
4858 # xterm-r6. The default keyboard appears to be 'linux'.
4861 # a) konsole implements several features from XFree86 xterm, though none of
4862 # that is documented - except of course in its source code - apparently
4863 # because its implementors are unaccustomed to reading documentation - as
4864 # evidenced by the sparse and poorly edited documentation distributed with
4865 # konsole. Some features such as the 1049 private mode are recognized but
4866 # incorrectly implemented as a duplicate of the 47 private mode.
4867 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
4868 # sends PC-style escapes rather than vt100.
4869 # c) fails vttest menu 3 (Test of character sets) because it does not properly
4870 # parse some control sequences. Also fails vttest Primary Device Attributes
4871 # by sending a bogus code (in the source it says it's supposed to be a
4872 # vt220, which is doubly incorrect because it does not implement vt220
4873 # control sequences except for a few special cases). Treat it as a
4874 # mildly-broken vt102.
4876 # Update for konsole 1.3.2:
4877 # The 1049 private mode works (but see the other xterm screens in vttest).
4878 # Primary Device Attributes now returns the code for a vt100 with advanced
4879 # video option. Perhaps that's intended to be a "mildly-broken vt102".
4881 # Updated for konsole 1.6.4:
4882 # add konsole-solaris
4884 # Updated for konsole 1.6.6:
4885 # add control-key modifiers for function-keys, etc.
4887 # Updated for konsole 2.12.4:
4890 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
4891 # different from xterm (and vt100's). They have the same behavior in this
4892 # detail, but it is unclear which copies the other.
4893 konsole-base|KDE console window,
4896 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
4897 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
4898 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1=\E[3~,
4899 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
4900 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
4901 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, ritm=\E[23m,
4902 rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
4903 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
4904 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
4905 sgr0=\E[0m\017, sitm=\E[3m, smam=\E[?7h, vpa=\E[%i%p1%dd,
4906 use=ecma+color, use=xterm-r6,
4907 konsole-linux|KDE console window with linux keyboard,
4908 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
4909 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
4910 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
4911 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
4912 konsole-solaris|KDE console window with Solaris keyboard,
4913 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4914 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
4915 # than testing the code.
4916 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
4917 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
4918 # The value for kbs reflects local customization rather than the settings used
4919 # for XFree86 xterm.
4920 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
4921 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
4923 # Konsole does not implement shifted cursor-keys.
4924 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
4925 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
4927 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
4928 # it is still useful for deriving the other entries.
4929 konsole-vt100|KDE console window with vt100 (sic) keyboard,
4930 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
4931 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
4932 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
4933 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4934 khome=\E[H, use=konsole-base,
4935 konsole-vt420pc|KDE console window with vt420 pc keyboard,
4936 kbs=^H, kdch1=\177, use=konsole-vt100,
4937 konsole-16color|klone of xterm-16color,
4938 ncv#32, use=ibm+16color, use=konsole,
4939 # make a default entry for konsole
4940 konsole|KDE console window,
4943 # palette is hardcoded...
4944 konsole-256color|KDE console window with xterm 256-colors,
4945 use=xterm+256setaf, use=konsole,
4948 # http://mlterm.sourceforge.net/
4950 mlterm|multi lingual terminal emulator,
4953 # Tested mlterm 3.2.2:
4954 # mlterm 3.x has made changes, but they are not reflected in the included
4955 # mlterm.ti; this entry is based on testing with tack and vttest -TD
4956 mlterm3|multi lingual terminal emulator,
4957 kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
4958 ritm=\E[23m, sitm=\E[3m, use=xterm+app, use=xterm+pcf0,
4959 use=xterm+pcc2, use=xterm+pce2, use=mlterm2,
4961 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
4963 # It is nominally a vt102 emulator, with features borrowed from rxvt and
4966 # The function keys are numbered based on shift/control/alt modifiers, except
4967 # that the control-modifier itself is used to spawn a new copy of mlterm (the
4968 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
4969 # how it is configured.
4971 # kf1 to kf12 \E[11~ to \E[24~
4972 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
4973 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
4974 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
4975 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
4976 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
4977 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
4978 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
4980 mlterm2|multi lingual terminal emulator,
4981 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
4982 colors#8, cols#80, it#8, lines#24, pairs#64,
4983 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4984 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4985 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
4986 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4987 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4988 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4989 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4990 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
4991 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4992 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
4993 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4994 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4995 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
4996 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
4997 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
4998 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4999 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
5000 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
5001 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
5002 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5003 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
5004 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
5005 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5006 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
5007 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
5009 # The insert/delete/home/end keys do not respond to modifiers because mlterm
5010 # looks in its termcap to decide which string to send. If it used terminfo
5011 # (when available), it could use the extended names introduced for xterm.
5012 mlterm+pcfkeys|fragment for PC-style fkeys,
5013 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
5014 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
5015 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
5016 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
5017 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
5018 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
5019 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
5020 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
5021 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
5023 mlterm-256color|mlterm 3.0 with xterm 256-colors,
5024 use=xterm+256color, use=mlterm,
5027 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
5028 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
5031 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
5032 # but some applications don't work with that.
5033 # It also has an AIX extension
5037 # but the latter does not work correctly.
5039 # The distributed terminfo says it implements hpa and vpa, but they are not
5040 # implemented correctly, using relative rather than absolute positioning.
5042 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
5043 # Since rxvt is not really compatible with xterm, it should be configured as
5044 # "rxvt" or "rxvt-color".
5046 # removed dch/dch1 because they are inconsistent with bce/ech -TD
5047 # remove km as per tack test -TD
5048 rxvt-basic|rxvt terminal base (X Window System),
5049 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
5050 cols#80, it#8, lines#24,
5051 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5052 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5053 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5054 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5055 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5056 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5057 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5058 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
5059 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
5060 ind=^J, is1=\E[?47l\E=\E[?1l,
5061 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
5062 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5063 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
5065 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5066 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
5067 s0ds=\E(B, s1ds=\E(0, sc=\E7,
5068 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
5069 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
5070 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
5071 use=rxvt+pcfkeys, use=vt220+keypad,
5072 # Key Codes from rxvt reference:
5074 # Note: Shift + F1-F10 generates F11-F20
5076 # For the keypad, use Shift to temporarily override Application-Keypad
5077 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
5078 # is off, escape sequences toggle Application-Keypad setting.
5079 # Also note that values of Home, End, Delete may have been compiled
5080 # differently on your system.
5082 # Normal Shift Control Ctrl+Shift
5083 # Tab ^I ESC [ Z ^I ESC [ Z
5084 # BackSpace ^H ^? ^? ^?
5085 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
5086 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
5087 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5088 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
5089 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
5090 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
5091 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
5092 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
5093 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5094 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
5095 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
5096 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
5097 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
5098 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
5099 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
5100 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
5101 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
5102 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
5103 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
5104 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
5105 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
5106 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
5107 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
5108 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
5109 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
5110 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
5111 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
5112 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
5113 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
5116 # Up ESC [ A ESC [ a ESC O a ESC O A
5117 # Down ESC [ B ESC [ b ESC O b ESC O B
5118 # Right ESC [ C ESC [ c ESC O c ESC O C
5119 # Left ESC [ D ESC [ d ESC O d ESC O D
5120 # KP_Enter ^M ESC O M
5121 # KP_F1 ESC O P ESC O P
5122 # KP_F2 ESC O Q ESC O Q
5123 # KP_F3 ESC O R ESC O R
5124 # KP_F4 ESC O S ESC O S
5125 # XK_KP_Multiply * ESC O j
5126 # XK_KP_Add + ESC O k
5127 # XK_KP_Separator , ESC O l
5128 # XK_KP_Subtract - ESC O m
5129 # XK_KP_Decimal . ESC O n
5130 # XK_KP_Divide / ESC O o
5142 # The source-code for rxvt actually defines mappings for F21-F35, using
5143 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
5144 # are rare, so this entry uses the shift- and control-modifiers as in
5145 # xterm+pcfkeys to define keys past F12.
5147 # kIC is normally not used, since rxvt performs a paste for that (shifted
5148 # insert), unless private mode 35 is set.
5150 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
5151 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
5152 rxvt+pcfkeys|fragment for PC-style fkeys,
5153 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
5154 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
5155 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
5156 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5157 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5158 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5159 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
5160 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
5161 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
5162 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
5163 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
5164 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
5165 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
5166 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5167 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
5168 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
5169 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
5170 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
5171 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
5172 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
5174 # rxvt was originally "xvt", first announced in April 1993:
5175 # http://www.informatica.co.cr/linux-desktops/research/1993/0416.html
5177 # Though its change-log does not mention this, John Davis has stated that he
5178 # was the author of the changes to use the bce ("new color model") which was
5179 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
5180 # dates, nor give developer's names. Initial color support was added for rxvt
5181 # "2.0", which was sometime in 1994.
5183 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my work on
5184 # vttest, as well as bug reports to Mark Olesen. For instance, the fix
5186 # http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
5187 # was from one of my bug-reports -TD
5189 # While the color model both for xterm and rxvt was based on Linux console,
5190 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
5191 # behavior: inserting/deleting characters does not fill the newly empty cell
5192 # with the default background color.
5193 rxvt|rxvt terminal emulator (X Window System),
5195 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
5196 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
5197 rxvt-color|rxvt terminal emulator (X Window System),
5199 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
5200 use=xterm+256color, use=rxvt,
5201 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
5202 use=xterm+88color, use=rxvt,
5203 rxvt-xpm|rxvt terminal emulator (X Window System),
5205 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
5206 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
5208 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
5209 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
5212 # This variant is supposed to work with rxvt 2.7.7 when compiled with
5213 # NO_BRIGHTCOLOR defined. rxvt needs more work...
5214 rxvt-16color|rxvt with 16 colors like aixterm,
5215 ncv#32, use=ibm+16color, use=rxvt,
5220 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
5221 # makes its function-keys different from other flavors of rxvt -TD
5223 # Testing with tack:
5224 # + made custom description (below) to work, though it sets TERM=xterm.
5226 # Testing with vttest:
5227 # + While "based on" rxvt, some of the basic functionality is broken. The
5228 # window collapses to a single line when running several of the screens
5229 # in vttest, e.g., the tests for cursor movement, screen features,
5230 # double-sized characters.
5231 # + The vt52 test works properly, but this is an exception. Due to the
5232 # other bug(s) most of vttest is untestable.
5233 # + the color test using ECH shows a gap in the bce model, like rxvt.
5235 # Testing with xterm "vttest" scripts:
5236 # + resize.pl does not work because mrxvt does implement CSI 18 t
5237 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
5238 # + none of the "dynamic colors" (OSC colors) scripts work.
5239 mrxvt|multitabbed rxvt,
5241 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
5242 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
5243 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
5244 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
5245 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
5246 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
5249 mrxvt-256color|multitabbed rxvt with 256 colors,
5250 use=xterm+256color, use=mrxvt,
5253 # From: Michael Jennings <mej@valinux.com>
5257 # removed kf0 which conflicts with kf10 -TD
5258 # remove cvvis which conflicts with cnorm -TD
5259 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
5260 # but does otherwise follow the rxvt+pcfkeys model -TD
5261 # remove nonworking flash -TD
5262 # remove km as per tack test -TD
5263 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
5264 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
5265 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
5266 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5267 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5268 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
5269 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5270 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5271 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5272 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5273 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
5274 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5275 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
5276 is1=\E[?47l\E>\E[?1l,
5277 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
5278 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
5279 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
5280 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5281 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
5282 rmso=\E[27m, rmul=\E[24m,
5283 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5284 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
5286 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
5287 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
5288 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5289 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
5292 Eterm-256color|Eterm with xterm 256-colors,
5293 use=xterm+256color, use=Eterm,
5295 Eterm-88color|Eterm with 88 colors,
5296 use=xterm+88color, use=Eterm,
5299 # Based on rxvt 2.4.8, it has a few differences in key bindings
5300 aterm|AfterStep terminal,
5302 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
5306 # This is not based on xterm's source...
5307 # vttest shows several problems with keyboard, cursor-movements.
5308 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
5309 xiterm|internationalized terminal emulator for X,
5311 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
5315 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
5316 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
5317 # chars look like --esr)
5318 hpterm|X-hpterm|hp X11 terminal emulator,
5319 am, da, db, mir, xhp,
5320 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
5321 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
5322 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
5323 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
5324 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
5325 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5326 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
5327 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
5328 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
5329 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
5330 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
5331 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
5332 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
5333 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
5334 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
5336 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
5337 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
5338 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
5339 # HPUX 11 provides a color version.
5340 hpterm-color|HP X11 terminal emulator with color,
5344 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
5345 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
5348 # This is for the extensible terminal emulator on the X11R6 contrib tape.
5349 # It corresponds to emu's internal emulation:
5351 # emu's default sets TERM to "xterm", but that doesn't work well -TD
5352 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
5353 # fixes: add civis, cnorm, sgr -TD
5354 emu|emu native mode,
5355 am, bce, mir, msgr, xon,
5356 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
5357 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
5358 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
5359 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
5360 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
5361 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
5362 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
5363 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
5364 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
5365 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
5366 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
5367 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
5368 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
5369 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
5370 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
5371 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
5372 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
5373 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
5375 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
5376 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
5378 # vt220 Terminfo entry for the Emu emulation, corresponds to
5380 # with NumLock set (to make the keypad transmit kf0-kf9).
5381 # fixes: add am, xenl, corrected sgr0 -TD
5382 emu-220|Emu-220 (vt200-7bit mode),
5384 cols#80, it#8, lines#24, vt#200,
5385 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
5386 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
5387 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
5388 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
5389 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
5390 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
5391 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
5392 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
5393 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
5394 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
5395 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5396 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
5397 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
5398 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
5399 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
5400 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
5401 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
5402 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
5403 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
5404 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
5405 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
5406 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5407 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
5408 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
5411 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
5412 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
5413 # indicate that it emulates more than one terminal, but incompletely.
5415 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
5416 # It is based on vt102's entry, with some subtle differences, but also
5418 # supports ANSI colors (except for 'op' string)
5419 # apparently implements alternate screen like xterm
5420 # does not use padding, of course.
5421 mvterm|vv100|SwitchTerm aka mvTERM,
5422 am, eslok, hs, km, mir, msgr, xenl,
5423 colors#8, cols#80, it#8, lines#24, pairs#64,
5424 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5425 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
5426 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5427 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5428 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5429 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5430 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
5431 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5432 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
5433 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
5434 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
5435 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5436 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
5438 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
5439 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5440 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
5441 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
5442 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5443 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
5447 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
5449 # "mterm -type ansi" sets $TERM to "ansi"
5450 mterm-ansi|ANSI emulation,
5453 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5454 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
5455 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
5456 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
5457 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
5458 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
5459 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
5460 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
5461 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
5462 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
5464 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5465 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
5467 # mterm normally sets $TERM to "mterm"
5468 mterm|mouse-sun|Der Mouse term,
5471 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
5472 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
5473 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
5474 rmir=^O, rmso=^T, smir=^Q, smso=^V,
5475 # "mterm -type decansi" sets $TERM to "decansi"
5477 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
5478 decansi|ANSI emulation with DEC compatibility hacks,
5479 am, mir, msgr, xenl,
5480 colors#8, it#8, pairs#64,
5481 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5482 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5483 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
5484 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5485 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5486 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5487 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5488 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
5489 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
5490 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
5491 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
5492 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
5493 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5494 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5495 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
5496 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5497 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
5498 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
5499 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
5500 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
5501 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5502 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5503 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
5504 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
5505 u7=\E[6n, vpa=\E[%i%p1%dd,
5508 # http://vwm.sourceforge.net/
5510 # VWM 2.0.2 (2009-05-01)
5511 # vwmterm is a terminal emulator written for the VWM console window manager.
5512 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
5514 am, bce, ccc, mir, msgr, npc, xenl, xon,
5516 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5517 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5518 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
5519 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5520 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5521 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
5522 home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
5523 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5524 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
5525 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5526 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5527 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
5528 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
5529 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5530 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5531 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
5532 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
5536 # MGR is a Bell Labs window system lighter-weight than X.
5537 # These entries describe MGR's xterm-equivalent.
5538 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
5541 mgr|Bellcore MGR (non X) window system terminal emulation,
5543 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
5544 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
5545 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
5546 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
5547 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
5548 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
5549 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
5550 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
5551 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
5553 mgr-sun|Mgr window with Sun keyboard,
5554 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
5555 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
5556 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
5557 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
5558 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
5559 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
5560 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
5561 mgr-linux|Mgr window with Linux keyboard,
5562 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
5563 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
5564 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
5565 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5566 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
5572 # This version uses a table which supports a single modifier (a subset of
5573 # xterm's keys, using the same scheme). Because it supports only a single
5574 # modifier in this table, function keys f36-f48 are normally unavailable
5575 # because they are assigned to modifier-4.
5577 # The program assigns TERM to match the program name (the upstream source says
5578 # "st", but Debian renames it to "stterm").
5580 # The source includes two entries which are not useful here:
5581 # st-meta| simpleterm with meta key,
5582 # st-meta-256color| simpleterm with meta key and 256 colors,
5583 # because st's notion of "meta" does not correspond to the terminfo definition.
5584 # Rather, it acts like xterm - when the meta feature is disabled.
5587 # Added eo, removed ul -TD
5590 # implements control-modifier, but not control-shift for special keys
5591 # implements alt-modifier, but not alt-shift for special keys
5592 st|stterm| simpleterm 0.4.1,
5593 am, bce, eo, hs, mir, msgr, xenl,
5594 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5595 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5596 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5597 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
5598 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5599 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5600 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5601 cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5602 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5603 enacs=\E)0, flash=\E[?5h\E[?5l, fsl=^G, home=\E[H,
5604 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5605 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
5606 is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, kEND=\E[1;2F,
5607 kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
5608 kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, ka3=\E[5~, kb2=\EOu,
5609 kbs=\177, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, kclr=\E[3;5~,
5610 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5611 kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F,
5612 kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
5613 kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R,
5614 kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
5615 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
5616 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
5617 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
5618 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
5619 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
5620 kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
5621 kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
5622 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
5623 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
5624 kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
5625 kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
5626 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
5627 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
5628 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
5629 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5630 kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
5631 kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, op=\E[39;49m,
5632 rc=\E8, rev=\E[7m, ri=\EM, ritm=\E[23m, rmacs=\E(B,
5633 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
5634 rmul=\E[m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l, sc=\E7,
5635 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5636 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5637 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
5638 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
5639 sgr0=\E[0m, sitm=\E[3m, smacs=\E(0, smcup=\E[?1049h,
5640 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5641 tbc=\E[3g, tsl=\E]0;, u6=\E[%i%d;%dR, u7=\E[6n,
5642 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd,
5646 # Note: the original terminfo description uses leading blank to persuade
5647 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
5650 # Reading the code shows it should work for aixterm 16-colors
5651 # - added st-16color
5654 # - set eo (erase-overstrike)
5656 # - tbc doesn't work
5658 # - cbt doesn't work
5659 # - shifted cursor-keys send sequences like rxvt
5660 # - sgr referred to unimplemented "invis" mode.
5661 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
5662 simpleterm|old-st| simpleterm 0.1.1,
5663 am, eo, mir, msgr, ul, xenl,
5664 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5665 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5666 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
5667 cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
5668 cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5669 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5670 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
5671 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5672 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177,
5673 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5674 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5675 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5676 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5677 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
5678 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
5679 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5680 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
5681 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
5682 st-16color|stterm-16color|simpleterm with 16-colors,
5683 use=ibm+16color, use=st,
5684 # 256 colors "works", but when running xterm's test-scripts, some garbage is
5685 # shown in the titlebar.
5687 # terminal wants to use TERM=stterm-256color, but that is longer than 14
5688 # characters, making the choice nonportable.
5689 st-256color|stterm-256color|simpleterm with 256 colors,
5690 use=xterm+256color, use=st,
5693 # https://code.google.com/p/jessies/
5694 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
5695 # Debian/current -TD (2011/8/20)
5697 # There are some packaging problems:
5698 # a) using Java, the program starts off using 50Mb, and climbs from there,
5699 # up to 114Mb after testing (no scrollback).
5700 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
5701 # (two copies, just in case the host happens to be Mac OS X).
5702 # I deleted this after testing with tack.
5704 # Issues/features found with tack:
5705 # a) tbc does not work (implying that hts also is broken).
5706 # Comparing with the tabs utility shows a problem with the last tabstop on
5708 # b) has xterm-style shifted function-key strings
5709 # meta also is used, but control is ignored.
5710 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
5711 # d) some combinations of shift/control send xterm-style sequences for
5712 # insert/delete/home/end.
5713 # e) numeric keypad sends only numbers (compare with vttest).
5714 # f) meta mode (km) is not implemented.
5716 # Issues found with ncurses test-program:
5717 # a) bce is inconsistently implemented
5718 # b) widths of Unicode values above 256 do not always agree with wcwidth.
5720 # Checked with vttest, found low degree of compatibility there.
5722 # Checked with xterm's scripts, found that the 256-color palette is fixed.
5726 # b) corrected sgr0 to reset alternate character set
5727 # c) modified smacs/rmacs to use SCS rather than SI/SO
5730 terminator|Terminator no line wrap,
5731 eo, mir, msgr, xenl, xon,
5732 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
5733 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5734 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
5735 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
5736 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
5737 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
5738 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
5739 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5740 enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG,
5741 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
5742 is1=\E[?47l\E=\E[?1l,
5743 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
5744 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5745 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5746 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
5747 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5748 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5749 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
5750 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
5751 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
5752 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5753 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
5754 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
5755 setaf=\E[38;5;%p1%dm,
5756 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
5757 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
5758 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
5762 # http://enlightenment.org
5764 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a vt100
5765 # emulator, nor is it compatible with xterm, but it uses a few features from
5769 # cursor does not fill on focus
5770 # there are pervasive problems with clearing/erasing parts of the screen
5771 # resizing the window causes it to stop listening to the keyboard
5773 # doesn't understand vt100 CPR needed for resize
5778 # uses bce model for colors, but (see below) fails the vttest screens
5779 # has partial support for 256color feature.
5780 # tack function-keys (a subset of xterm+pcf0), and
5781 # tack cursor-keys (a subset of xterm+pce2):
5782 # ctrl+shift (ignored)
5784 # shift-alt modifier -> shift (2)
5788 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
5789 # ctrl + khome/kend works - none of the other modifiers do
5791 # spits lots of messages from termptyesc.c especially in vttest.
5792 # no 132-column mode
5793 # fails menu 1, 2 (definitely not vt100-compatible)
5794 # primary (claims vt420 with several options, apparently none work) and
5795 # secondary report says (perhaps... vt420): \E[>41;285;0c
5796 # CHA, HPR, VPA, CNL, CPL work
5797 # BCE with ED/EL - fail
5798 # BCE with ECH/indexing - fail
5800 # unlike teken, background light/dark works
5802 # X10 and Normal mouse work
5803 # Any-event mouse works
5804 # Mouse button-event works
5806 # This description uses xterm+pcf0, which is misleading because the program
5807 # does not handle combinations of modifiers - but listing them all would
5808 # involve more effort than its developers spent -TD
5809 terminology|EFL-based terminal emulator,
5811 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
5812 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
5813 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5814 kind=\E[1;2B, kri=\E[1;2A,
5815 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
5816 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
5817 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
5818 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
5819 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
5820 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
5821 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
5822 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
5823 kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
5826 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
5829 # Columbus UNIX virtual terminal. This terminal also appears in
5830 # UNIX 4.0 and successors as line discipline 1 (?), but is
5831 # undocumented and does not really work quite right.
5832 cbunix|cb unix virtual terminal,
5834 cols#80, lines#24, lm#0,
5835 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
5836 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
5837 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
5838 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
5839 smso=\Ea^D, smul=\Ea^A,
5840 # (vremote: removed obsolete ":nl@:" -- esr)
5841 vremote|virtual remote terminal,
5843 cols#79, use=cbunix,
5845 pty|4bsd pseudo teletype,
5846 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
5847 smso=\Ea$, smul=\Ea!, use=cbunix,
5851 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
5852 eterm|gnu emacs term.el terminal emulation,
5855 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
5856 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5857 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5858 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5859 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5860 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
5861 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
5862 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
5863 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
5866 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
5867 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
5868 am, mir, msgr, xenl,
5869 colors#8, cols#80, lines#24, pairs#64,
5870 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
5871 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5872 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5873 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5874 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5875 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
5876 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
5877 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5878 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
5879 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
5880 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
5881 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
5882 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
5883 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
5884 u6=\E[%i%d;%dR, u7=\E[6n,
5888 # Entries for use by the `screen' program by Juergen Weigert,
5889 # Michael Schroeder, Oliver Laumann. The screen and
5890 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
5891 # come from University of Wisconsin and may be older.
5892 # (screen: added <cnorm> on ANSI model -- esr)
5894 # 'screen' defines extensions to termcap. Some are used in its terminal
5896 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
5897 # AX (bool) Does understand ANSI set default fg/bg color
5898 # (\E[39m / \E[49m).
5899 # S0 (str) Switch charset 'G0' to the specified charset.
5900 # E0 (str) Switch charset 'G0' back to standard charset.
5902 # Initially tested with screen 3.09.08
5904 # According to its manual page
5906 # Screen is a full-screen window manager that multiplexes a physical
5907 # terminal between several processes (typically interactive shells). Each
5908 # virtual terminal provides the functions of a DEC VT100 terminal and, in
5909 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
5910 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
5911 # multiple character sets).
5913 # However, there is a design error in its support for video highlights. The
5914 # program uses a table (rendlist) which equates the SGR codes to terminal
5915 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
5916 # is modified only by the presence or absence of the corresponding capabilities.
5917 # Not by their values.
5919 # If screen sets the TERMCAP variable, it uses hardcoded strings which
5920 # correspond to the rendlist table.
5922 # The table gives this information:
5934 # 22 reset bold, standout and dim
5936 # 24 reset underline
5941 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
5942 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
5943 # Without some redesign of screen, it is not possible to extend the set of
5944 # capabilities. Substitution would be possible, e.g., sending italics in
5945 # place of underline.
5947 # Because screen uses hard-coded parsing, it does not check if two capabilities
5948 # use the same value. For example, changing standout to be the same as any of
5949 # the other capabilities will confuse screen. Curses applications which use
5950 # sgr are not impacted (because that usually resets all capabilities before
5951 # setting any), but termcap applications do not use sgr -TD
5952 screen|VT 100/ANSI X3.64 virtual terminal,
5953 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
5954 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
5955 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5956 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5957 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
5958 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5959 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
5960 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
5961 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
5962 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5963 enacs=\E(B\E)0, flash=\Eg, home=\E[H, ht=^I, hts=\EH,
5964 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0,
5965 kbs=^H, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
5966 kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5967 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5968 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5969 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
5970 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5971 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
5972 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
5973 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
5974 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
5975 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
5976 S0=\E(%p1%c, use=ecma+color,
5977 # The bce and status-line entries are from screen 3.9.13 (and require some
5978 # changes to .screenrc).
5979 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
5982 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
5983 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
5985 # ======================================================================
5986 # Entries for GNU Screen with 16 colors.
5987 # Those variations permit to benefit from 16 colors palette, and from
5988 # bold font and blink attribute separated from bright colors. But they
5989 # are less portable than the generic "screen" 8 color entries: Their
5990 # usage makes real sense only if the terminals you attach and reattach
5991 # do all support 16 color palette.
5993 screen-16color|GNU Screen with 16 colors,
5994 use=ibm+16color, use=screen,
5996 screen-16color-s|GNU Screen with 16 colors and status line,
5997 use=ibm+16color, use=screen-s,
5999 screen-16color-bce|GNU Screen with 16 colors and BCE,
6000 use=ibm+16color, use=screen-bce,
6002 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
6003 bce, use=ibm+16color, use=screen-s,
6005 # ======================================================================
6006 # Entries for GNU Screen 4.02 with --enable-colors256.
6008 screen-256color|GNU Screen with 256 colors,
6009 use=xterm+256setaf, use=screen,
6011 screen-256color-s|GNU Screen with 256 colors and status line,
6012 use=xterm+256setaf, use=screen-s,
6014 screen-256color-bce|GNU Screen with 256 colors and BCE,
6015 bce, use=xterm+256setaf, use=screen-bce,
6017 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
6018 bce, use=xterm+256setaf, use=screen-s,
6020 screen.xterm-256color|GNU Screen with xterm using 256 colors,
6021 use=xterm+256setaf, use=screen.xterm-new,
6023 screen.konsole-256color|GNU Screen with konsole using 256 colors,
6024 use=xterm+256setaf, use=screen.konsole,
6026 screen.vte-256color|GNU Screen with vte using 256 colors,
6027 use=xterm+256setaf, use=screen.vte,
6029 screen.putty-256color|GNU Screen with putty using 256 colors,
6030 use=xterm+256setaf, use=screen.putty,
6032 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
6033 use=xterm+256setaf, use=screen.mlterm,
6035 # ======================================================================
6037 # Read the fine manpage:
6038 # When screen tries to figure out a terminal name for
6039 # itself, it first looks for an entry named "screen.<term>",
6040 # where <term> is the contents of your $TERM variable. If
6041 # no such entry exists, screen tries "screen" (or "screen-w"
6042 # if the terminal is wide (132 cols or more)). If even this
6043 # entry cannot be found, "vt100" is used as a substitute.
6045 # Notwithstanding the manpage, screen uses its own notion of the termcap
6046 # and some keys from "screen.<term>" are ignored. Here is an entry which
6047 # covers those (tested with screen 4.00.02) -TD
6048 screen+fkeys|function-keys according to screen,
6049 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
6052 # See explanation before "screen" entry. Cancel italics so that applications
6053 # do not assume screen supports the feature. Add this tweak to entries which
6054 # extend screen for terminals which do support italics.
6055 screen+italics|screen cannot support italics,
6058 # Here are a few customized entries which are useful -TD
6061 # (a) screen does not support invis.
6062 # (b) screen's implementation of bw is incorrect according to tack.
6063 # (c) screen appears to hardcode the strings for khome/kend, making it
6064 # necessary to override the "use=" clause's values (screen+fkeys).
6065 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
6066 # which is NOT the same as the terminfo screen.<term>.
6067 # (e) when screen finds one of these customized entries, it sets $TERM to
6068 # match. Hence, no "screen.xterm" entry is provided, since that would
6069 # create heartburn for people running remote xterm's.
6071 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
6072 # since the default translations override the built-in keycode
6073 # translation. They are suppressed here to show what is tested by tack.
6074 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
6076 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
6077 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
6078 E3@, use=screen+italics, use=screen+fkeys, use=xterm-new,
6079 #:screen.xterm|screen for modern xterm,
6080 #: use=screen.xterm-new,
6081 # xterm-r6 does not really support khome/kend unless it is propped up by
6082 # the translations resource.
6083 screen.xterm-r6|screen customized for X11R6 xterm,
6084 bw, use=screen+fkeys, use=xterm-r6,
6085 # Color applications running in screen and TeraTerm do not play well together
6086 # on Solaris because Sun's curses implementation gets confused.
6087 screen.teraterm|disable ncv in teraterm,
6089 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6090 use=screen+fkeys, use=screen,
6092 screen.rxvt|screen in rxvt,
6094 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6095 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
6096 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
6097 screen.Eterm|screen in Eterm,
6098 use=screen+fkeys, use=Eterm,
6099 screen.mrxvt|screen in mrxvt,
6100 use=screen+fkeys, use=mrxvt,
6101 screen.vte|screen in any VTE-based terminal,
6102 use=screen+italics, use=screen+fkeys, use=vte,
6103 screen.gnome|screen in GNOME Terminal,
6104 use=screen+italics, use=screen+fkeys, use=gnome,
6105 screen.konsole|screen in KDE console window,
6106 use=screen+italics, use=screen+fkeys, use=konsole,
6107 # fix the backspace key
6108 screen.linux|screen in linux console,
6110 kbs=\177, kcbt@, use=screen+fkeys, use=screen,
6111 screen.mlterm|screen in mlterm,
6112 use=screen+fkeys, use=mlterm,
6113 screen.putty|screen in putty,
6114 use=screen+fkeys, use=putty,
6116 # The default "screen" entry is reasonably portable, but not optimal for the
6117 # most widely-used terminal emulators. The "bce" capability is supported in
6118 # screen since 3.9.13, and when used, will require fewer characters to be sent
6119 # to the terminal for updates.
6121 # If you are using only terminals which support bce, then you can use this
6122 # feature in your screen configuration.
6124 # Adding these lines to your ".screenrc" file will allow using these customized
6129 screen-bce.xterm-new|screen optimized for modern xterm,
6131 ech@, use=screen+italics, use=screen.xterm-new,
6132 screen-bce.rxvt|screen optimized for rxvt,
6134 ech@, use=screen.rxvt,
6135 screen-bce.Eterm|screen optimized for Eterm,
6137 ech@, use=screen.Eterm,
6138 screen-bce.mrxvt|screen optimized for mrxvt,
6140 ech@, use=screen.mrxvt,
6141 screen-bce.gnome|screen optimized for GNOME-Terminal,
6143 ech@, use=screen+italics, use=screen.gnome,
6144 screen-bce.konsole|screen optimized for KDE console window,
6146 ech@, use=screen+italics, use=screen.konsole,
6147 screen-bce.linux|screen optimized for linux console,
6149 ech@, use=screen.linux,
6151 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
6152 cols#132, use=screen,
6154 screen2|old VT 100/ANSI X3.64 virtual terminal,
6155 cols#80, it#8, lines#24,
6156 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
6157 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6158 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6159 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6160 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
6161 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6162 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
6163 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
6164 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
6165 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
6166 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
6167 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
6168 screen3|older VT 100/ANSI X3.64 virtual terminal,
6170 cols#80, it#8, lines#24,
6171 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
6172 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6173 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6174 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6175 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6176 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6177 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
6178 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
6179 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
6180 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
6181 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
6182 smul=\E[4m, tbc=\E[3g,
6184 # tmux is compatible with screen, but has support for italics, and some of the
6185 # xterm cursor bits.
6186 tmux|tmux terminal multiplexer,
6187 ritm=\E[23m, rmso=\E[27m, sitm=\E[3m, smso=\E[7m, Ms@,
6188 use=xterm+sl, use=xterm+tmux, use=screen,
6190 tmux-256color|tmux with 256 colors,
6191 use=xterm+256setaf, use=tmux,
6195 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
6196 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
6197 # been maintained until recently by the National Center for Supercomputer
6198 # Applications, and it is feature rich, stable and free. It can be downloaded
6199 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
6200 # xterm+sl, and the docs at NCSA. It works well.
6202 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
6203 # The terminal options should be set as follows:
6204 # Xterm sequences ON
6205 # use VT wrap mode ON
6206 # use Emacs arrow keys OFF
6207 # CTRL-COMND is Emacs meta ON
6209 # answerback string: "ncsa-vt220-8"
6210 # setup keys: all disabled
6212 # Application mode is not used.
6214 # Other special mappings:
6221 # PAGEDOWN Next Screen
6223 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
6226 # The status-line manipulation is a mapping of the xterm-compatible control
6227 # sequences for setting the window-title. So you must use tsl and fsl in
6228 # pairs, since the latter ends the string that is loaded to the window-title.
6229 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
6230 am, km, mir, msgr, xenl,
6231 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6232 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6233 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
6234 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6235 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6236 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6237 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6238 el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l,
6239 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6240 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
6242 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
6243 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6244 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
6245 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
6246 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
6247 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
6248 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
6249 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
6250 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
6251 rmso=\E[27m, rmul=\E[24m,
6252 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
6253 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
6254 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
6255 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6256 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
6257 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6258 use=ncsa-m, use=klone+color,
6259 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6261 dsl@, fsl@, tsl@, use=ncsa,
6262 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
6264 dsl@, fsl@, tsl@, use=ncsa-m,
6266 # The documented function-key mapping refers to the Apple Extended Keyboard
6267 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
6268 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
6269 # some keyboards and many applications require these as F1-F4.
6271 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
6272 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6273 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
6274 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
6275 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
6276 kf8=\E[19~, kf9=\E[20~, use=ncsa,
6278 #### Pilot Pro Palm-Top
6280 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
6281 # http://www.ai/~iang/TGssh/
6282 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
6285 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
6286 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
6287 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
6290 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
6291 # These entries are for the Embeddable Linux Kernel System (ELKS)
6292 # project - an heavily stripped down Linux to be run on 16 bit
6293 # boxes or, eventually, to be used in embedded systems - and have been
6294 # adapted from the stock ELKS termcap. The project itself looks stalled,
6295 # and the latest improvements I know of date back to March 2000.
6297 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
6298 # as an added bonus, this deals with all the capabilities common to
6299 # both VT52 and ANSI (or, eventually, "special") modes.
6301 elks-glasstty|ELKS glass-TTY capabilities,
6303 cols#80, it#8, lines#25,
6304 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
6307 elks-vt52|ELKS vt52 console,
6308 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
6309 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
6310 home=\EH, use=elks-glasstty,
6312 elks-ansi|ELKS ANSI console,
6313 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6314 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6315 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
6317 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
6318 # instead of VT52, but the "elks" entry still refers to the latter.
6320 elks|default ELKS console,
6323 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
6324 # one but in screen size
6326 sibo|ELKS SIBO console,
6327 cols#61, it#8, lines#20, use=elks-vt52,
6329 ######## COMMERCIAL WORKSTATION CONSOLES
6335 # This is from the OSF/1 Release 1.0 termcap file
6336 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
6339 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6340 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6341 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
6342 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
6343 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6348 # :is1: resets scrolling region in case a previous user had used "tset vt100"
6349 oldsun|Sun Microsystems Workstation console,
6350 OTbs, am, km, mir, msgr,
6351 cols#80, it#8, lines#34,
6352 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
6353 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6354 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6355 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
6356 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6357 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
6358 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6359 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
6360 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
6361 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
6362 sun-il|Sun Microsystems console with working insert-line,
6365 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6366 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6367 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6368 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
6369 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6370 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
6371 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
6372 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
6373 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
6374 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
6375 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
6376 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6377 smso=\E[7m, u8=\E[1t, u9=\E[11t,
6378 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
6379 # flake out on the last line. Unfortunately, without them the terminal has no
6381 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
6382 il@, il1@, use=sun-il,
6383 # If you are using an SS5, change the sun definition to use sun-ss5.
6384 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
6387 sun+sl|Sun Workstation window status line,
6389 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
6391 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
6392 sun-s|Sun Microsystems Workstation window with status line,
6394 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
6395 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
6397 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
6398 sun-48|Sun 48-line window,
6399 cols#80, lines#48, use=sun,
6400 sun-34|Sun 34-line window,
6401 cols#80, lines#34, use=sun,
6402 sun-24|Sun 24-line window,
6403 cols#80, lines#24, use=sun,
6404 sun-17|Sun 17-line window,
6405 cols#80, lines#17, use=sun,
6406 sun-12|Sun 12-line window,
6407 cols#80, lines#12, use=sun,
6408 sun-1|Sun 1-line window for sysline,
6411 dsl=^L, fsl=\E[K, tsl=^M, use=sun,
6412 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
6413 ich1@, rmir@, smir@, use=sun,
6414 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
6416 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
6417 sun-type4|Sun Workstation console with type 4 keyboard,
6418 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
6419 kcuu1=\E[215z, use=sun-il,
6421 # Most of the current references to sun-color are from users wondering why this
6422 # is the default on install. Details from reading the wscons manpage, adding
6423 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
6424 # when those were added -TD (2005-05-28)
6426 # According to wscons manpage, color is supported only on IA systems.
6427 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
6428 # does not list these. It also sets ncv#3, however that corresponds to
6429 # underline and standout.
6431 # Since the documentation and terminfo do not agree, see also current code at
6432 # http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
6434 # That (actually a different driver which "supports" sun-color) also supports
6441 # It supports bold, but not underline -TD (2009-09-19)
6442 sun-color|Sun Microsystems Workstation console with color support (IA systems),
6443 colors#8, ncv#3, pairs#64,
6444 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
6445 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
6446 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6447 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
6448 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
6449 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6450 smso=\E[7m, use=sun,
6455 # (wsiris: this had extension capabilities
6456 # :HS=\E7F2:HE=\E7F7:\
6457 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
6458 # See the note on Iris extensions near the end of this file.
6459 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
6460 # <flash> from BRL -- esr)
6461 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
6462 OTbs, OTnc, OTpt, am,
6463 OTkn#3, cols#80, it#8, lines#40,
6464 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
6465 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
6466 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
6467 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
6468 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
6469 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
6470 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
6471 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
6476 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
6477 # environment). Note: these have nothing to do with Sony's News workstation
6481 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
6482 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
6483 psterm|psterm-basic|NeWS psterm-80x34,
6484 OTbs, am, hs, km, ul,
6485 cols#80, it#8, lines#34,
6486 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
6487 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
6488 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
6489 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
6490 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
6491 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
6492 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
6494 psterm-96x48|NeWS psterm 96x48,
6495 cols#96, lines#48, use=psterm,
6496 psterm-90x28|NeWS psterm 90x28,
6497 cols#90, lines#28, use=psterm,
6498 psterm-80x24|NeWS psterm 80x24,
6499 cols#80, lines#24, use=psterm,
6500 # This is a faster termcap for psterm. Warning: if you use this termcap,
6501 # some control characters you type will do strange things to the screen.
6502 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
6503 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
6504 OTbs, am, hs, km, ul,
6505 cols#80, it#8, lines#34,
6506 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
6507 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
6508 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
6509 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6510 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
6511 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
6512 smso=^Oo, smul=^Ou, tsl=^Ol,
6516 # Use `glasstty' for the Workspace application
6519 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
6522 cols#80, it#8, lines#24,
6523 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
6524 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6525 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
6526 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
6527 nextshell|NeXT Shell application,
6530 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
6533 #### Sony NEWS workstations
6536 # (news-unk: this had :KB=news: -- esr)
6537 news-unk|SONY NEWS vt100 emulator common entry,
6538 OTbs, OTpt, am, xenl,
6540 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
6541 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
6542 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
6543 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
6544 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
6545 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
6546 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
6547 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
6548 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
6549 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6550 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
6551 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6553 # (news-29: this had :TY=ascii: --esr)
6555 lines#29, use=news-unk,
6556 # (news-29-euc: this had :TY=euc: --esr)
6559 # (news-29-sjis: this had :TY=sjis: --esr)
6563 # (news-33: this had :TY=ascii: --esr)
6565 lines#33, use=news-unk,
6566 # (news-33-euc: this had :TY=euc: --esr)
6569 # (news-33-sjis: this had :TY=sjis: --esr)
6573 # (news-42: this had :TY=ascii: --esr)
6575 lines#42, use=news-unk,
6576 # (news-42-euc: this had :TY=euc: --esr)
6579 # (news-42-sjis: this had :TY=sjis: --esr)
6583 # NEWS-OS old termcap entry
6585 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
6586 news-old-unk|SONY NEWS vt100 emulator common entry,
6587 OTbs, OTpt, am, xenl,
6589 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
6590 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
6591 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6592 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
6593 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
6594 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
6595 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6596 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6597 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6599 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
6600 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
6603 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
6606 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
6607 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
6609 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
6612 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
6613 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
6616 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
6619 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
6620 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
6623 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
6626 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
6627 # also the alias vt100-bm.
6628 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
6631 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
6634 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
6635 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
6638 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
6641 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
6642 news28|sony vt100 emulator 28 lines,
6645 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
6648 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
6649 news29|news28-a|sony vt100 emulator 29 lines,
6651 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
6654 # (news511: this had :TY=sjis: --esr)
6655 nwp511|nwp-511|nwp-511 vt100,
6656 OTbs, OTpt, am, xenl,
6658 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6659 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
6660 ed=\E[J$<30/>, el=\E[K$<3/>,
6661 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
6662 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
6663 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
6664 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
6665 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
6666 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
6667 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
6668 # (news517: this had :TY=sjis:. --esr)
6669 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
6672 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
6673 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
6674 tsl=\E[1$}\E[;%df, use=vt200,
6675 # (news517-w: this had :TY=sjis:. --esr)
6676 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
6679 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
6680 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
6681 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
6682 tsl=\E[1$}\E[;%df, use=vt200,
6684 #### Common Desktop Environment
6687 # This ships with Sun's CDE in Solaris 2.5
6688 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
6689 dtterm|CDE desktop terminal,
6690 am, mir, msgr, xenl, xon,
6691 cols#80, it#8, lines#24, lm#0, ncv@,
6692 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6693 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6694 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
6695 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6696 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6697 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6698 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
6699 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6700 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
6701 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
6702 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
6703 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6704 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
6705 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
6706 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
6707 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
6708 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6709 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
6710 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6711 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
6713 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6714 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6715 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
6717 ######## Non-Unix Consoles
6720 #### EMX termcap.dat compatibility modes
6722 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
6723 # no_color_video to inform the application that standout(1), underline(2)
6724 # reverse(4) and invisible(64) don't work with color.
6725 emx-base|DOS special keys,
6728 bel=^G, use=ansi.sys,
6730 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
6731 # a Unix-style environment used on OS/2. (Note that the suffix makes some
6732 # names longer than 14 characters, the nominal maximum).
6734 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
6735 ansi-emx|ANSI.SYS color,
6736 am, bce, eo, mir, msgr, xon,
6737 colors#8, cols#80, it#8, lines#25, pairs#64,
6738 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6739 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
6740 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
6741 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
6742 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
6743 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
6744 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
6745 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
6746 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6747 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
6748 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
6749 u9=\E[c, use=emx-base,
6750 # nice colors for Emacs (white on blue, mode line white on cyan)
6751 ansi-color-2-emx|ANSI.SYS color 2,
6752 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
6753 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
6754 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
6755 smul=\E[1;36;44m, use=ansi-emx,
6756 # nice colors for Emacs (white on black, mode line black on cyan)
6757 ansi-color-3-emx|ANSI.SYS color 3,
6758 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
6759 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
6760 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
6761 smul=\E[0;36;40m, use=ansi-emx,
6762 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
6764 cols#80, it#8, lines#24,
6765 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6766 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6767 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
6768 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
6769 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
6770 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
6775 # Use this for cygwin32 (tested with beta 19.1)
6776 # underline is colored bright magenta
6777 # shifted kf1-kf12 are kf11-kf22
6778 cygwinB19|ansi emulation for cygwin32,
6779 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6780 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
6781 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6782 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
6783 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
6784 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6785 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
6788 # Use this for cygwin (tested with version 1.1.0).
6789 # I've combined pcansi and linux. Some values of course were different and
6790 # I've indicated which of these were and which I used.
6791 # Cheers, earnie_boyd@yahoo.com
6792 # several changes based on running with tack and comparing with older entry -TD
6793 # more changes from csw:
6795 # remove eo [erase overstrike with blank]
6796 # change clear was \E[H\E[J now \E[2J (faster?)
6799 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
6801 # add cub [cursor back param]
6802 # add cuf [cursor forward param]
6803 # add cuu [cursor up param]
6804 # add cud [cursor down param]
6805 # add hs [has status line]
6806 # add fsl [return from status line]
6807 # add tsl [go to status line]
6808 # add smacs [Start alt charset] (not sure if this works)
6809 # add rmacs [End alt charset] (ditto)
6810 # add smcup [enter_ca_mode] (save console; thanks Corinna)
6811 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
6812 # add kb2 [center of keypad]
6813 # add u8 [user string 8] \E[?6c
6814 # add el [clear to end of line] \E[K
6816 # cnorm [make cursor normal] not implemented
6817 # flash [flash] not implemented
6818 # blink [blink] not implemented very usefully in cygwin? \E[5m
6819 # dim [dim] not implemented very usefully in cygwin? \E[2m
6820 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
6821 # kNXT [shifted next key] not implemented
6822 # kPRV [shifted prev key] not implemented
6823 # khome [home key] really is \E[1~ NOT \E[H
6824 # tbc [clear tab stops] not implemented
6825 # xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
6826 # smpch [Start PC charset] is \E[11m, same as smacs
6827 # rmpch [End PC charset] is \E[10m, same as rmacs
6828 # mir [move in insert mode] fails in tack?
6829 # bce [back color erase] causes problems with change background color?
6830 # cvvis [make cursor very visible] causes a stackdump when testing with
6831 # testcurs using the output option? \E[?25h\E[?8c
6832 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
6833 # ech [erase characters param] broken \E[%p1%dX
6834 # kcbt [back-tab key] not implemented in cygwin? \E[Z
6837 # Remove cbt since it does not work in current cygwin
6838 # Add 'mir' and 'in' flags based on tack
6839 cygwin|ansi emulation for Cygwin,
6840 am, hs, mir, msgr, xon,
6841 colors#8, it#8, pairs#64,
6842 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6843 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
6844 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6845 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6846 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
6847 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
6848 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
6849 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
6850 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6851 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
6852 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6853 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
6854 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
6855 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6856 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
6857 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
6858 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
6859 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
6860 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6861 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
6862 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
6863 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
6864 vpa=\E[%i%p1%dd, use=vt102+enq,
6866 # I've supplied this so that you can help test new values and add other
6867 # features. Cheers, earnie_boyd@yahoo.com.
6869 # Some features are from pcansi. The op value is from linux. Function-keys
6870 # are from linux. These have been tested not to cause problems. xenl was in
6871 # this list, but DOES cause problems so it has been removed
6872 cygwinDBG|Debug Version for Cygwin,
6873 am, eo, mir, msgr, xon,
6874 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
6875 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6876 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
6877 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
6878 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6879 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6880 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
6881 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6882 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
6883 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
6884 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
6885 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
6886 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
6887 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6888 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6889 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
6890 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
6891 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6892 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
6893 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
6894 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
6895 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6896 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
6897 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
6898 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
6903 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
6904 # encodings used by other x86 environments. All others are invented for DJGPP.
6905 # Oddly enough, while several combinations of modifiers are tabulated, there is
6906 # none for shifted cursor keys.
6958 # Ctrl-Delete \E[43~
6959 # Ctrl-Down Arrow \E[38~
6962 # Ctrl-Insert \E[42~
6963 # Ctrl-Left Arrow \E[39~
6964 # Ctrl-Page Down \E[46~
6965 # Ctrl-Page Up \E[45~
6966 # Ctrl-Right Arrow \E[40~
6967 # Ctrl-Up Arrow \E[37~
6983 # Alt-Down Arrow \E[60~
6987 # Alt-Left Arrow \E[61~
6988 # Alt-Page Down \E[68~
6989 # Alt-Page Up \E[67~
6990 # Alt-Right Arrow \E[62~
6991 # Alt-Up Arrow \E[59~
7020 djgpp|ansi emulation for DJGPP alpha,
7021 am, bce, msgr, xhp, xon, xt,
7022 colors#8, it#8, pairs#64,
7023 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
7024 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7025 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
7026 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7027 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7028 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7029 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7030 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
7031 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7032 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
7033 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
7034 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
7035 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
7036 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7037 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
7038 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
7039 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7040 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
7041 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
7043 djgpp203|Entry for DJGPP 2.03,
7045 cols#80, it#8, lines#25,
7046 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
7049 djgpp204|Entry for DJGPP 2.04,
7051 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
7052 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7053 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
7054 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7055 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7056 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
7057 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
7058 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7059 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
7060 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7061 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
7062 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7063 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7064 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
7065 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
7066 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7070 # This is tested using U/Win's telnet. Scrolling is omitted because it is
7071 # buggy. Another odd bug appears when displaying "~" in alternate character
7072 # set (the emulator spits out error messages). Compare with att6386 -TD
7073 uwin|U/Win 3.2 console,
7074 am, eo, in, msgr, xenl, xon,
7075 colors#8, it#8, ncv#58, pairs#64,
7076 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
7077 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7078 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
7079 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7080 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
7081 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
7082 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
7083 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
7084 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
7085 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
7086 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
7087 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
7088 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
7089 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
7090 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
7091 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
7093 #### Microsoft (miscellaneous)
7095 # This entry fits the Windows NT console when the _POSIX_TERM environment
7096 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
7097 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
7098 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
7099 # systems is not, and (surprise!) they match very well.
7101 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
7102 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
7103 # are the installation instructions a pile of mind-numbing bureaucratese,
7104 # but the termcap entry is actually broken and unusable as given; the :do:
7105 # capability is misspelled "d".
7107 # To use this, you need to a bunch of environment variables:
7109 # SET _POSIX_TERM=on
7111 # SET TERMCAP=location of termcap file in POSIX file format
7112 # which is case-sensitive.
7113 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
7116 # Important note: setting the TMP environment variable in POSIX style renders
7117 # it incompatible with a lot of other applications, including Visual C++. So
7118 # you should have a separate command window just for vi. All the other
7119 # variables may be permanently set in the Control Panel\System applet.
7121 # You can find out more about the restrictions of this facility at
7122 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
7124 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
7125 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
7127 cols#80, it#8, lines#25,
7128 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
7129 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
7130 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
7131 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
7132 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
7133 # From: jew@venus.sunquest.com
7134 # Date: 19 Feb 93 23:41:07 GMT
7135 # Here's a combination of ansi and vt100 termcap
7136 # entries that works nearly perfectly for me
7137 # (Gateway 2000 Handbook and Microsoft Works 3.0):
7138 pcmw|PC running Microsoft Works,
7140 cols#80, it#8, lines#24, vt#3,
7141 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
7142 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
7143 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
7144 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
7145 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
7146 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7147 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
7148 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
7149 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
7150 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7151 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
7154 # From: Federico Bianchi
7155 # This is the entry for the OpenNT terminal.
7156 # The ntconsole name is for backward compatability.
7157 # This is for OpenNT 2.0 and later.
7158 # Later OpenNT was renamed to Interix.
7160 # Presently it is distributed by Microsoft as Services For Unix (SFU).
7161 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
7162 # the documentation dates from 1.9.9e) -TD
7164 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
7166 colors#8, cols#80, lines#25, ncv#3, pairs#64,
7167 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
7168 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
7169 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
7170 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7171 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
7172 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7173 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
7174 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
7175 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
7176 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
7177 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
7178 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
7179 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
7180 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
7181 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
7182 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
7183 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
7184 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
7185 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
7186 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
7187 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
7188 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
7189 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
7190 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
7191 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7192 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
7193 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
7195 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
7196 lines#35, use=opennt,
7198 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
7199 lines#50, use=opennt,
7201 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
7202 lines#60, use=opennt,
7204 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
7205 lines#100, use=opennt,
7207 # OpenNT wide terminals
7208 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
7209 cols#125, use=opennt,
7211 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
7212 lines#35, use=opennt-w,
7214 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
7215 lines#50, use=opennt-w,
7217 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
7218 lines#60, use=opennt-w,
7220 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
7221 cols#132, use=opennt,
7223 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
7224 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
7225 rmcup@, smcup@, use=opennt,
7227 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
7228 lines#35, use=opennt-nti,
7230 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
7231 lines#50, use=opennt-nti,
7233 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
7234 lines#60, use=opennt-nti,
7236 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
7237 lines#100, use=opennt-nti,
7239 ######## COMMON TERMINAL TYPES
7241 # This section describes terminal classes and maker brands that are still
7242 # quite common, but have proprietary command sets not blessed by ANSI.
7247 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
7248 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
7249 # Acer has a web site at http://www.acer.com.
7251 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
7252 # His comments suggest they were shipped with the system.
7255 # (altos2: had extension capabilities
7256 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7257 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7258 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7259 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7260 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7261 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
7262 # :HL=^AP\r:SP=\E[i:\
7263 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
7264 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
7265 # Comparison with the k* capabilities makes it obvious that the c* things are
7266 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
7267 # :sr: was given as a boolean-- esr)
7268 altos2|alt2|altos-2|altos II,
7269 cols#80, it#8, lines#24, xmc#0,
7270 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
7271 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
7272 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
7273 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
7274 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
7275 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
7276 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
7277 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7278 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7279 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7280 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7281 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
7282 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
7283 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
7284 # (altos3: had extension capabilities
7285 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7286 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7287 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7288 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7289 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7290 # :HL=^AP\r:SP=\E[i:\
7291 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
7292 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
7293 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
7294 altos4|alt4|altos-4|altos IV,
7296 # (altos7: had extension capabilities:
7297 # :GG#0:GI=\EH8:GF=\EH7:\
7298 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7299 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7300 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7301 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7302 # Comparison with the k* capabilities makes it obvious that the c* things are
7303 # shift keys. I have renamed them to keys 32 and up accordingly. I have
7304 # also made this entry relative to adm12 in order to give it an <sgr>. The
7305 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
7306 altos7|alt7|altos VII,
7308 cols#80, lines#24, xmc#0,
7309 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
7310 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7311 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7312 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
7314 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
7315 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
7316 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
7317 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7318 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7319 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7320 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7321 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
7322 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
7323 rmir=\Er, smir=\Eq, use=adm+sgr,
7324 altos7pc|alt7pc|altos PC VII,
7325 kend=\ET, use=altos7,
7327 #### Hewlett-Packard (hp)
7330 # 8000 Foothills Blvd
7331 # Roseville, CA 95747
7332 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
7333 # 1-(800)-633-3600 (General customer support)
7336 # As of March 1998, HP no longer has any terminals in production.
7337 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
7338 # supported (they still have parts). So are the 2392a and 2394a.
7339 # See the WORKSTATION CONSOLES section for the 700s.
7342 # Generic HP terminal - this should (hopefully) work on any HP terminal.
7343 hpgeneric|hp|hewlett-packard generic terminal,
7344 OTbs, OTpt, am, da, db, mir, xhp,
7345 cols#80, lines#24, lm#0, vt#6,
7346 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
7347 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
7348 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
7349 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
7350 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
7353 hp110|hewlett-packard model 110 portable,
7354 lines#16, use=hpgeneric,
7356 hp+pfk+cr|hp function keys with CR,
7357 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
7358 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
7360 hp+pfk-cr|hp function keys w/o CR,
7361 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
7364 # The hp2621s use the same keys for the arrows and function keys,
7365 # but not separate escape sequences. These definitions allow the
7366 # user to use those keys as arrow keys rather than as function
7368 hp+pfk+arrows|hp alternate arrow definitions,
7369 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
7370 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
7371 kll=\Eq\r, kri=\Es\r,
7373 hp+arrows|hp arrow definitions,
7374 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7375 kind=\ES, kll=\EF, kri=\ET,
7377 # Generic stuff from the HP 262x series
7379 hp262x|HP 262x terminals,
7381 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
7382 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7383 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
7384 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
7385 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
7386 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
7387 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
7389 # Note: no <home> on HPs since that homes to top of memory, not screen.
7390 # Due to severe 2621 braindamage, the only way to get the arrow keys to
7391 # transmit anything at all is to turn on the function key labels
7392 # with <smkx>, and even then the user has to hold down shift!
7393 # The default 2621 turns off the labels except when it has to to
7394 # enable the function keys. If your installation prefers labels
7395 # on all the time, or off all the time (at the "expense" of the
7396 # function keys), use 2621-nl or 2621-wl.
7398 # Note: there are newer ROMs for 2621's that allow you to set
7399 # strap A so the regular arrow keys xmit \EA, etc, as with the
7400 # 2645. However, even with this strap set, the terminal stops
7401 # xmitting if you reset it, until you unset and reset the strap!
7402 # Since there is no way to set/unset the strap with an escape
7403 # sequence, we don't use it in the default.
7404 # If you like, you can use 2621-ba (brain-damaged arrow keys).
7405 hp2621-ba|2621 w/new rom and strap A set,
7406 rmkx@, smkx@, use=hp+arrows, use=hp2621,
7408 # hp2621 with function labels. Most of the time they are off,
7409 # but inside vi, the function key labels appear. You have to
7410 # hold down shift to get them to xmit.
7411 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
7412 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
7416 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
7417 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
7418 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
7419 use=hp+pfk+cr, use=hpgeneric,
7421 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
7422 hp2621p|hp 2621 with printer,
7423 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
7425 hp2621p-a|hp2621p with fn as arrows,
7426 use=hp+pfk+arrows, use=hp2621p,
7428 # hp2621 with k45 keyboard
7429 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
7430 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
7431 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
7433 # 2621 using all 48 lines of memory, only 24 visible at any time.
7434 hp2621-48|48 line 2621,
7436 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
7439 # 2621 with no labels ever. Also prevents vi delays on escape.
7440 hp2621-nl|hp 2621 with no labels,
7441 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
7444 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
7447 hp2621-nt|hp 2621 w/no tabs,
7450 # Hp 2624 B with 4 or 10 pages of memory.
7452 # Some assumptions are made with this entry. These settings are
7453 # NOT set up by the initialization strings.
7455 # Port Configuration
7460 # Terminal Configuration
7466 # Note: the 2624 DOES have a true <home>, believe it or not!
7468 # The 2624 has an "error line" to which messages can be sent.
7469 # This is CLOSE to what is expected for a "status line". However,
7470 # after a message is sent to the "error line", the next carriage
7471 # return is EATEN and the "error line" is turned back off again!
7472 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
7474 # This entry supports emacs (and any other program that uses raw
7475 # mode) at 4800 baud and less. I couldn't get the padding right
7478 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
7479 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
7482 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
7483 use=hp+labels, use=scrhp,
7485 # This hp2626 entry does not use any of the fancy windowing stuff
7488 # Indeed, terminfo does not yet handle such stuff. Since changing
7489 # any window clears memory, it is probably not possible to use
7490 # this for screen opt.
7492 # ed is incredibly slow most of the time - I am guessing at the
7493 # exact padding. Since the terminal uses xoff/xon this is intended
7494 # only for cost computation, so that the terminal will prefer el
7495 # or even dl1 which is probably faster!
7497 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
7498 # extra slow on the last line of the window.
7500 # The padding probably should be changed.
7502 hp2626|hp2626a|hp2626p|hp 2626,
7505 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
7506 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
7507 use=hp+labels, use=scrhp,
7509 # This entry is for sysline. It allocates a 23 line window with
7510 # a 115 line workspace for regular use, and a 1 line window for
7513 # This assumes port 2 is being used.
7514 # Turn off horizontal line, Create ws #1 with 115 lines,
7515 # Create ws #2 with 1 line, Create window #1 lines 1-23,
7516 # Create window #2 lines 24-24, Attach cursor to workspace #1.
7517 # Note that this clears the tabs so it must be done by tset before
7520 hp2626-s|hp 2626 using only 23 lines,
7523 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
7524 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
7525 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
7526 # Force terminal back to 24 lines after being 23.
7527 hp2626-ns|hp 2626 using all 24 lines,
7528 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
7530 # Various entries useful for small windows on 2626.
7531 hp2626-12|hewlett-packard 2626 12 lines,
7532 lines#12, use=hp2626,
7533 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
7534 cols#40, lines#12, use=hp2626,
7535 hp2626-x40|hewlett-packard 2626 40 columns,
7536 cols#40, use=hp2626,
7537 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
7538 lines#11, use=hp2626-s,
7541 # hp2627 color tubes from University of Wisconsin
7543 hp2627a-rev|hp 2627 with reverse video colors,
7544 cr=^M, cud1=^J, ht=^I, ind=^J,
7545 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
7546 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
7547 smul=\E&dD\E&v1S, use=hp2621-nl,
7548 hp2627a|hp 2627 color terminal with no labels,
7549 cr=^M, cud1=^J, ht=^I, ind=^J,
7550 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
7551 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
7552 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
7554 hp2627c|hp 2627 color (cyan) terminal with no labels,
7555 cr=^M, cud1=^J, ht=^I, ind=^J,
7556 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
7557 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
7559 # hp2640a doesn't have the Y cursor addressing feature, and C is
7560 # memory relative instead of screen relative, as we need.
7563 cup@, rmkx@, smkx@, use=hp2645,
7565 hp2640b|hp2644a|hp 264x series,
7566 rmkx@, smkx@, use=hp2645,
7568 # (hp2641a: removed unknown :gu: -- esr)
7569 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
7570 am, da, db, mir, xhp,
7572 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
7573 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
7574 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
7575 if=/usr/share/tabset/std, il1=\EL, ind=^J,
7576 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
7577 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
7580 # This terminal should be used at 4800 baud or less. It needs padding for
7581 # plain characters at 9600, I guessed at an appropriate cr delay. It really
7582 # wants ^E/^F handshaking, but that doesn't work well even if you write
7583 # software to support it.
7584 hp2645|hp45|HP 2645 series,
7586 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
7587 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7588 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
7589 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
7591 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
7592 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
7593 # You should use this terminal at 4800 baud or less.
7594 hp2648|hp2648a|HP 2648a graphics terminal,
7595 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
7596 dch1=\EP$<7>, ip=$<5>, use=hp2645,
7598 # The HP 150 terminal is a fairly vanilla HP terminal, with the
7599 # clreol standout problem. It also has graphics capabilities and
7600 # a touch screen, which we don't describe here.
7601 hp150|hewlett packard Model 150,
7604 # HP 2382a terminals, "the little ones." They don't have any
7605 # alternate character set support and sending out ^N/^O will
7606 # leave the screen blank.
7607 hp2382a|hp2382|hewlett packard 2382a,
7611 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
7613 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
7614 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
7616 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
7617 use=hp+pfk+arrows, use=hp2621-fl,
7619 # newer hewlett packard terminals
7621 newhpkeyboard|generic entry for HP extended keyboard,
7622 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7623 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
7624 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
7625 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
7628 newhp|generic entry for new hewlett packard terminals,
7629 am, bw, mir, xhp, xon,
7630 cols#80, lines#24, pb#4800,
7631 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
7632 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
7633 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
7634 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
7635 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
7636 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
7637 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
7638 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
7639 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
7640 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
7641 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
7642 tbc=\E3, use=newhpkeyboard,
7644 memhp|memory relative addressing for new HP ttys,
7646 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
7647 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
7648 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
7649 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
7651 scrhp|screen relative addressing for new HP ttys,
7652 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
7653 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
7654 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
7655 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
7656 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
7658 # (hp+labels: added label values from a BRL termcap -- esr)
7659 hp+labels|"standard" label info for new HP ttys,
7661 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
7662 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
7663 rmln=\E&j@, smln=\E&jB,
7665 hp+printer|"standard" printer info for HP ttys,
7666 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
7669 # The new hp2621b is kind of a cross between the old 2621 and the
7670 # new 262x series of machines. It has dip-switched options.
7671 # The firmware has a bug in it such that if you give it a null
7672 # length label, the following character is eaten!
7673 hp2621b|hp 2621b with old style keyboard,
7674 lh#1, lm#48, lw#8, nlab#8,
7675 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7676 kind=\ET, kll=\EF, kri=\ES,
7677 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
7678 smln=\E&jB, use=hp2621,
7680 hp2621b-p|hp 2621b with printer,
7681 use=hp+printer, use=hp2621b,
7683 # hp2621b - new 2621b with new extended keyboard
7684 # these are closer to the new 26xx series than the other 2621b
7685 hp2621b-kx|hp 2621b with extended keyboard,
7686 use=newhpkeyboard, use=hp2621b,
7688 hp2621b-kx-p|hp 2621b with new keyboard & printer,
7689 use=hp+printer, use=hp2621b-kx,
7691 # Some assumptions are made in the following entries.
7692 # These settings are NOT set up by the initialization strings.
7694 # Port Configuration
7695 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
7697 # Terminal Configuration
7698 # InhHndShk(G)=Yes InhDC2(H)=Yes
7699 # XmitFnctn(A)=No InhEolWrp=No
7702 # Hp 2622a & hp2623a display and graphics terminals
7704 hp2622|hp2622a|hp 2622,
7707 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
7709 # The 2623 is a 2622 with extra graphics hardware.
7710 hp2623|hp2623a|hp 2623,
7713 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
7714 use=hp+printer, use=hp2624,
7716 # The hewlett packard B can have an optional extra 6 pages of memory.
7717 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
7720 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
7721 lm#240, use=hp2624b-p,
7723 # Color manipulations for HP terminals
7724 hp+color|hp with colors,
7726 colors#16, ncv#17, pairs#7,
7727 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
7728 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
7729 op=\E&v0S, scp=\E&v%p1%dS,
7731 # <is2> sets the screen to be 80 columns wide
7732 hp2397a|hp2397|hewlett packard 2397A color terminal,
7733 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
7735 # HP 700/44 Setup parameters:
7736 # Terminal Mode HP-PCterm
7737 # Inhibit Auto Wrap NO
7738 # Status Line Host Writable
7739 # PC Character Set YES
7740 # Twenty-Five Line Mode YES
7741 # XON/XOFF @128 or 64 (sc)
7742 # Keycode Mode NO or YES (sc)
7743 # Backspace Key BS or BS/DEL
7745 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
7746 # \E\\? does not turn off keycode mode
7747 # <smsc> sets alternate start/stop; keycode on
7748 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
7751 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
7752 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
7753 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7754 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
7755 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
7757 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
7758 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7759 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
7760 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
7761 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
7762 kpp=\E[5~, rmam=\E[?7l,
7763 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
7764 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
7765 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
7766 smul=\E[4m, xoffc=g, xonc=e,
7768 # (hp2392: copied <rmir> here from hpex -- esr)
7771 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
7772 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
7773 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
7774 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
7777 hpsub|hp terminals -- capability subset,
7778 am, da, db, mir, xhp, xon,
7780 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
7781 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
7782 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
7783 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
7784 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
7785 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
7788 # May be used for most 24 x 80 hp terminals,
7789 # but has no padding added, so may allow runover in some terminals at high
7790 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
7791 # hp98x5 terminal emulators or hp98x6 consoles.
7792 # Adds xy-cursor addressing, vertical cursor addressing, home,
7793 # last line, and underline capabilities.
7795 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
7796 # moved <rmir> here from hpsub -- esr)
7797 hpex|hp extended capabilites,
7798 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
7799 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
7800 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
7802 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
7803 hp2|hpex2|hewlett-packard extended capabilities newer version,
7804 am, da, db, mir, xhp,
7805 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
7806 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
7807 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
7808 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
7809 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
7810 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7811 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
7812 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
7813 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
7814 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
7815 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
7816 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
7817 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
7818 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
7819 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
7820 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
7821 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
7822 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
7825 # From: <ddavis@ic.berkeley.edu>
7826 hp236|hp236 internal terminal emulator,
7829 clear=\EF, cnorm=\EDE, cub1=^H,
7830 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
7831 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
7832 sgr0=\ECI, smso=\EBI,
7834 # This works on a hp300 console running Utah 4.3 BSD
7835 # From: Craig Leres <leres@okeeffe.berkeley.edu>
7836 hp300h|HP Catseye console,
7837 OTbs, am, da, db, mir, xhp,
7838 cols#128, lines#51, lm#0, xmc#0,
7839 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
7840 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
7841 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
7842 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
7843 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7844 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
7845 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
7847 # From: Greg Couch <gregc@ernie.berkeley.edu>
7848 hp9837|hp98720|hp98721|HP 9000/300 workstations,
7849 OTbs, am, da, db, mir, xhp,
7850 cols#128, it#8, lines#46, lm#0,
7851 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
7852 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
7853 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
7854 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
7855 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7856 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
7857 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
7858 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
7859 tbc=\E3, vpa=\E&a%p1%dY,
7860 # HP 9845 desktop computer from BRL
7861 # (hp9845: removed unknown capability :gu: -- esr)
7863 OTbs, am, da, db, eo, mir, xhp,
7865 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
7866 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
7867 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
7868 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
7869 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
7870 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
7871 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
7872 hp98550|hp98550a|HP 9000 Series 300 color console,
7873 OTbs, am, da, db, mir, xhp,
7874 cols#128, it#8, lines#49, lm#0,
7875 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
7876 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
7877 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
7878 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
7879 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
7880 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7881 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
7882 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
7883 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
7884 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
7885 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
7886 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
7887 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
7888 # From: Victor Duchovni <vic@fine.princeton.edu>
7889 # (hp700-wy: removed obsolete ":nl=^J:";
7890 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
7891 hp700-wy|HP700/41 emulating wyse30,
7892 OTbs, am, bw, mir, msgr,
7893 cols#80, it#8, lines#24, xmc#1,
7894 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
7895 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7896 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
7897 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
7898 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
7899 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
7900 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
7901 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
7902 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
7903 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
7904 hp70092|hp70092a|hp70092A|HP 700/92,
7906 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
7907 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
7908 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
7909 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
7910 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
7911 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
7912 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
7913 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
7914 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
7915 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
7916 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
7917 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
7918 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
7919 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
7921 bobcat|sbobcat|HP 9000 model 300 console,
7922 am, da, db, mir, xhp,
7923 cols#128, it#8, lines#47, xmc#0,
7924 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
7925 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
7926 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
7927 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
7928 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
7929 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
7930 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
7931 gator-t|HP 9000 model 237 emulating extra-tall AAA,
7932 lines#94, use=gator,
7933 gator|HP 9000 model 237 emulating AAA,
7935 cols#128, it#8, lines#47,
7936 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
7937 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
7938 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
7939 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
7940 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
7941 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
7942 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
7943 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7944 gator-52|HP 9000 model 237 emulating VT52,
7945 cols#128, lines#47, use=vt52,
7946 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
7947 lines#94, use=gator-52,
7951 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
7954 # Honeywell Bull terminal. Its cursor and function keys send single
7955 # control characters and it has standout/underline glitch. Most programs
7956 # do not like these features/bugs. Visual bell is realized by flashing the
7957 # "keyboard locked" LED.
7958 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
7960 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
7961 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
7962 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
7963 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
7964 dku7003|Honeywell Bull DKU 7003 all features described,
7967 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
7968 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7971 #### Lear-Siegler (adm)
7973 # These guys are long since out of the terminals business, but
7974 # in 1995 many current terminals still have an adm type as one of their
7975 # emulations (usually their stupidest, and usually labeled adm3, though
7976 # these `adm3' emulations normally have adm3a+ capabilities).
7978 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
7979 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
7980 # was being held to ground would trigger a send of the top line on the screen.
7981 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
7982 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
7983 # for clearing up this point.)
7985 adm1a|adm1|lsi adm1a,
7988 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7989 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
7994 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
7995 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7996 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
7997 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
7998 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
8002 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
8003 # The following ADM-3A switch settings are assumed for normal operation:
8004 # SPACE U/L_DISP CLR_SCRN 24_LINE
8005 # CUR_CTL LC_EN AUTO_NL FDX
8006 # Other switches may be set for operator convenience or communication
8007 # requirements. I recommend
8008 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
8010 # Most of these terminals required an option ROM to support lower case display.
8011 # Open the case and look at the motherboard; if you see an open 24-pin DIP
8012 # socket, you may be out of luck.
8014 # (adm3a: some capabilities merged in from BRl entry -- esr)
8018 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
8019 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8020 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
8024 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
8027 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
8028 rmso=\EG, smso=\EG, use=adm3a+,
8029 # A lot of terminals other than adm11s use these. Wherever you see
8030 # use=adm+sgr with some of its capabilities disabled, try the
8031 # disabled ones. They may well work but not have been documented or
8032 # expressed in the using entry. We'd like to cook up an <sgr> but the
8033 # <rmacs>/<smacs> sequences of the using entries vary too much.
8034 adm+sgr|adm style highlight capabilities,
8035 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
8036 smso=\EG4, smul=\EG8,
8037 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
8038 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
8039 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
8040 # be ^Z, according to his entry.
8041 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
8042 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
8045 OTkn#8, cols#80, lines#24,
8046 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
8047 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8048 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
8049 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
8050 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8051 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
8053 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
8054 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
8055 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
8056 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
8057 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
8058 # via BRL. That entry asserted <xmc#1>, but I've left that out because
8059 # neither earlier nor later ADMSs have it -- esr)
8061 # You will need to get into the supervisor setup before you can set
8062 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
8063 # see a lot more setup options.
8065 # While in supervisor setup you can also use following codes:
8067 # Ctrl-P Personality character selections (configure for example what
8068 # arrow keys send, if I recall correctly)
8069 # Ctrl-T tabs 1-80 use left&right to move and up to set and
8070 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
8071 # Ctrl-B Binary setup (probably not needed. I think that everything can
8072 # be set using normal setup)
8073 # Ctrl-A Answerback mode (enter answerback message)
8074 # Ctrl-U User friendly mode (normal setup)
8075 # Ctrl-D Defaults entire setup and function keys from EPROM tables
8076 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
8077 # Ctrl-R Reads both setup and functions keys from NVM.
8078 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
8080 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
8081 # RTS/CTS used nowadays with virtually every modem and computer. 19200
8082 # bps works fine with hardware flow control.
8084 # The following null-modem cable should fix this and enable you to use
8085 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
8086 # set ADM-12+ for DTR handshaking from supervisor setup.
8099 OTbs, OTpt, am, mir,
8100 OTug#1, cols#80, it#8, lines#24,
8101 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8102 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8103 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
8104 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
8105 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8106 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8107 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
8109 # (adm20: removed obsolete ":kn#7:" -- esr)
8110 adm20|lear siegler adm20,
8112 cols#80, it#8, lines#24,
8113 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
8114 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
8115 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
8116 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
8118 adm21|lear siegler adm21,
8120 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
8121 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=^J, invis@, kbs=^H,
8122 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
8123 use=adm+sgr, use=adm3a,
8124 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
8125 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
8126 # removed bogus-looking \200 from before <cup>. -- esr)
8130 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8131 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8132 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
8133 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
8134 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
8135 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8136 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
8137 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
8138 # ADM 31 DIP Switches
8140 # This information comes from two versions of the manual for the
8141 # Lear-Siegler ADM 31.
8145 # +-||||-------------------------------------+
8160 # +----------------------------------------------+
8161 # front of case (keyboard)
8163 # S1 - Data Rate - Modem
8164 # S2 - Data Rate - Printer
8165 # ------------------------
8167 # -------------------
8185 # S3 - Interface/Printer/Attributes
8186 # ---------------------------------
8187 # Printer Busy Control
8190 # off off off Busy not active, CD disabled
8191 # off off on Busy not active, CD enabled
8192 # off on off Busy active on J5-20, CD disabled
8193 # on off off Busy active on J5-19, CD disabled - Factory Set.
8194 # on off on Busy active on J5-19, CD enabled
8196 # sw4 Used in conjuction with S4 for comm interface control - Fact 0
8198 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
8200 # sw6 ON enables printer BUSY active LOW - Factory Setting
8201 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
8203 # sw7 ON - steady cursor - Factory Setting
8204 # OFF - blinking cursor
8206 # sw8 ON causes selected attribute character to be displayed
8207 # OFF causes SPACE to be displayed instead - Factory Setting
8213 # sw4 sw1 sw2 sw3 sw4
8214 # ---------------------------
8215 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
8216 # Current Loop disabled - Factory Setting
8217 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
8219 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
8220 # Current Loop Disabled
8222 # sw5 ON disables dot stretching mode - Factory Setting
8223 # OFF enables dot stretching mode
8224 # sw6 ON enables blanking function
8225 # OFF enables underline function - Factory Setting
8226 # sw7 ON causes NULLS to be displayed as NULLS
8227 # OFF causes NULLS to be displayed as SPACES - Factory Setting
8229 # S5 - Word Structure
8230 # -------------------
8231 # sw1 ON enables BREAK key - Factory Setting
8232 # OFF disables BREAK key
8233 # sw2 ON selects 50Hz monitor refresh rate
8234 # OFF selects 60Hz monitor refresh rate - Factory Setting
8236 # Modem Port Selection
8239 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
8240 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
8241 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
8242 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
8243 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
8244 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
8245 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
8246 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
8248 # sw6 ON sends bit 8 a 1 (mark)
8249 # OFF sends bit 8 as 0 (space) - Factory Setting
8250 # sw7 ON selects Block Mode
8251 # OFF selects Conversation Mode - Factory Setting
8252 # sw8 ON selects Full Duplex operation
8253 # OFF selects Half Duplex operation - Factory Setting
8257 # sw1, sw2, sw6, sw7 Reserved - Factory 0
8259 # Printer Port Selection
8260 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
8262 # sw8 ON enables Printer Port
8263 # OFF disables Printer Port - Factory Setting
8265 # S7 - Polling Address
8266 # --------------------
8267 # sw1-7 Establish ASCII character which designates terminal polling address
8269 # OFF = logic 1 - Factory Setting
8270 # sw8 ON enables Polling Option
8271 # OFF disables Polling Option - Factory Setting
8274 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
8276 # This adm31 entry uses underline as the standout mode.
8277 # If the adm31 gives you trouble with standout mode, check the DIP switch in
8278 # position 6, bank @c11, 25% from back end of the circuit board. Should be
8279 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
8280 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
8281 adm31|lsi adm31 with sw6 set for underline mode,
8284 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8285 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8286 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
8287 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8288 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8289 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
8290 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
8291 adm31-old|o31|old adm31,
8292 rmul@, smso=\EG4, smul@, use=adm31,
8293 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
8297 if=/usr/share/tabset/vt100,
8298 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
8300 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
8304 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8305 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8306 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
8307 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
8308 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
8309 smir=\Eq, smul@, use=adm+sgr,
8310 # The following termcap for the Lear Siegler ADM-42 leaves the
8311 # "system line" at the bottom of the screen blank (for those who
8312 # find it distracting otherwise)
8313 adm42-ns|lsi adm-42 with no system line,
8314 cbt=\EI\EF \011, clear=\E;\EF \011,
8315 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
8316 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
8317 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
8318 smir=\Eq\EF \011, use=adm42,
8319 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
8320 # The insert mode of this terminal is commented out because it's broken for our
8321 # purposes in that it will shift the position of every character on the page,
8322 # not just the cursor line!
8323 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
8324 adm1178|1178|lsi adm1178,
8326 cols#80, lines#24, xmc#1,
8327 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
8328 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8329 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
8330 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
8331 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
8332 sgr0=\E), smso=\EG4, smul=\EG1,
8336 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
8337 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
8338 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
8340 # ComputerVision Services
8341 # 500 Old Connecticut Path
8345 # Standout mode is dim reverse-video.
8346 pt100|pt200|wren|fenix|prime pt100/pt200,
8348 cols#80, it#8, lines#24,
8349 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
8350 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
8351 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
8352 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
8353 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
8354 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
8355 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
8356 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
8358 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
8359 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
8360 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
8362 cup=\E[%i%p1%d;%p2%dH, use=pt100,
8364 rmso@, smso@, use=pt100,
8365 pt250w|Prime PT250 in 132-column mode,
8366 rmso@, smso@, use=pt100w,
8371 # 3475-A North 1st Street
8373 # Vox: (800)-457-4447
8374 # Fax: (408)-473-1510
8375 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
8377 # Qume was bought by Wyse, but still (as of early 1995) has its own support
8378 # group and production division.
8380 # Discontinued Qume models:
8382 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
8383 # built to replace them, and a qvt119+ which was a 101+ with available wide
8384 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
8385 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
8386 # ANSI-compatible terminals with the qvt323 and qvt61.
8388 # Current Qume models (as of February 1995):
8390 # All current Qume terminals have ANSI-compatible operation modes.
8391 # Qume is still producing the qvt62, which features emulations for other
8392 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
8393 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
8394 # with many emulations including Wyse370, Wyse 325, etc. Their newest
8395 # model is the qvt520, which is vt420-compatible.
8397 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
8399 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
8400 # setup mode. Shift-s should be a configuration save to NVRAM.
8402 qvt101|qvt108|qume qvt 101 and QVT 108,
8405 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
8406 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
8407 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
8408 # What seems to be going on here is that this entry was designed so that
8409 # the normal highlight is bold and standout is dim plus something else
8410 # (reverse-video maybe? But then, are there two <rev> sequences?)
8412 # Added kdch1, kil1, kdl1 based on screenshot -TD:
8413 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
8414 qvt101+|qvt101p|qume qvt 101 PLUS product,
8416 cols#80, lines#24, xmc#0,
8417 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
8418 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8419 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
8420 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
8421 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
8422 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8423 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
8424 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8425 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
8426 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8427 qvt102|qume qvt 102,
8428 cnorm=\E., use=qvt101,
8429 # (qvt103: added <rmam>/<smam> based on init string -- esr)
8430 qvt103|qume qvt 103,
8432 cols#80, it#8, lines#24, vt#3,
8433 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
8434 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
8435 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
8436 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
8437 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
8438 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
8439 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8440 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
8441 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
8442 rmso=\E[m$<2>, rmul=\E[m$<2>,
8443 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8444 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
8445 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
8446 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
8447 qvt103-w|qume qvt103 132 cols,
8449 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
8450 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
8452 cols#80, lines#24, xmc#0,
8453 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
8454 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8455 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
8456 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
8457 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
8458 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
8459 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8460 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8461 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
8462 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8463 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
8464 lines#25, use=qvt119+,
8465 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
8467 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
8468 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
8469 lines#25, use=qvt119+,
8470 qvt203|qvt203+|qume qvt 203 Plus,
8471 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
8472 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
8473 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
8474 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
8475 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
8477 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
8479 # Since a command is present for enabling 25 data lines,
8480 # a specific terminfo entry may be generated for the 203.
8481 # If one is desired for the QVT 119 PLUS then 25 lines must
8482 # be selected in the status line (setup line 9).
8484 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
8486 is2=\E[=40h\E[?3l, use=qvt203,
8487 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
8489 rs2=\E[?3h\E[=40h, use=qvt203,
8491 #### Televideo (tvi)
8494 # 550 East Brokaw Road
8495 # PO Box 49048 95161
8497 # Vox: (408)-954-8333
8498 # Fax: (408)-954-0623
8501 # These require incredible amounts of padding.
8503 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
8504 # Televideo terminals are ANSI and PC-ANSI compatible.
8506 tvi803|televideo 803,
8507 clear=\E*$<10>, use=tvi950,
8509 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
8510 # Switch settings are:
8531 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
8547 # U do CR/LF when CR received
8548 # D do CR when CR received
8570 # S2 6 Cursor down key
8574 # S2 7 Screen colour
8578 # S2 8 DSR status (pin 6)
8582 # S2 9 DCD status (pin 8)
8586 # S2 10 DTR status (pin 20)
8589 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
8590 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
8591 tvi910|televideo model 910,
8593 cols#80, it#8, lines#24, xmc#1,
8594 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8595 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
8596 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
8597 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
8598 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
8599 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8600 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8601 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
8602 # From: Alan R. Rogers <rogers%albany@csnet-relay>
8603 # as subsequently hacked over by someone at SCO
8604 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
8606 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
8609 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
8610 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
8611 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
8612 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
8615 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
8616 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
8617 # D U D D 8O1 D U U U 8E2
8619 # S1 9 Autowrap (U = on, D = off)
8620 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
8621 # S2 1 Mode (U = block, D = conversational)
8622 # S2 2 Duplex (U = half, D = full)
8623 # S2 3 Hertz (U = 50, D = 60)
8624 # S2 4 Edit mode (U = local, D = duplex)
8625 # S2 5 Cursor type (U = underline, D = block)
8626 # S2 6 Cursor down key (U = send ^J, D = send ^V)
8627 # S2 7 Screen colour (U = green on black, D = black on green)
8628 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
8629 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
8630 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
8632 tvi910+|televideo 910+,
8633 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
8634 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
8635 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
8636 ll=\E=7\s, use=tvi910,
8638 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
8639 # <khome> from BRL entry -- esr)
8640 tvi912|tvi914|tvi920|old televideo 912/914/920,
8641 OTbs, OTpt, am, msgr,
8642 cols#80, it#8, lines#24, xmc#1,
8643 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8644 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8645 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
8646 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
8647 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
8648 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
8649 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8650 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
8652 # We got some new tvi912c terminals that act really weird on the regular
8653 # termcap, so one of our gurus worked this up. Seems that cursor
8654 # addressing is broken.
8655 tvi912cc|tvi912 at cowell college,
8658 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
8659 # From: Benjamin C. W. Sittler
8661 # Someone has put a scanned copy of the manual online at:
8662 # http://vt100.net/televideo/912b-om/
8664 # These terminals were produced ca. 1979, and had a 12" monochrome
8665 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
8666 # ASCII, and were generally similar to adm3a but with attributes
8667 # (including some with magic cookies), fancy half-duplex mode, and
8670 # Some operations reqire truly incredible amounts of padding. The
8671 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
8672 # are so slow as to be nearly unusable.
8674 # There may or may not have been a separate, earlier series of 912/920
8675 # terminals (without the "B" and "C" suffix); I have never seen one,
8676 # and the manual only describes the "B" and "C" series. The 912 and 920
8677 # are quite distinct from the 914 and 924, which were much nicer non-
8678 # magic-cookie terminals similar to the 950.
8680 # This is a new description for the following TeleVideo terminals,
8681 # distinguished chiefly by their keyboards:
8683 # TVI-912B - very odd layout, no function keys (84 keys)
8684 # TVI-920B - typewriter layout, no function keys (103 keys)
8685 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
8686 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
8688 # To choose a setting for the TERM variable, start with the model:
8690 # Model || base name
8691 # ----------||-----------
8692 # TVI-912B || tvi912b
8693 # TVI-912C || tvi912c
8694 # TVI-920B || tvi920b
8695 # TVI-920C || tvi920c
8697 # Then add a suffix from the following table describing installed options
8698 # and how you'd like to use the terminal:
8700 # Use Video | Second | Visual | Magic | Page || feature
8701 # Attributes | Page | Bell | Cookies | Print || suffix
8702 # ------------|--------|--------|---------|-------||---------
8703 # No | No | N/A | N/A | No || -unk
8704 # No | No | N/A | N/A | Yes || -p
8705 # No | Yes | No | N/A | No || -2p-unk
8706 # No | Yes | No | N/A | Yes || -2p-p
8707 # No | Yes | Yes | N/A | No || -vb-unk
8708 # No | Yes | Yes | N/A | Yes || -vb-p
8709 # Yes | No | N/A | No | N/A ||
8710 # Yes | No | N/A | Yes | N/A || -mc
8711 # Yes | Yes | No | No | N/A || -2p
8712 # Yes | Yes | No | Yes | N/A || -2p-mc
8713 # Yes | Yes | Yes | No | N/A || -vb
8714 # Yes | Yes | Yes | Yes | N/A || -vb-mc
8716 # So e.g. a model 920 C with second page memory option, visual bell
8717 # and no magic cookies would be tvi920c-vb; a model 912 B without the
8718 # second page memory option and using magic cookies would be
8723 # At 9600 baud, the terminal is prone to overflow its input buffer
8724 # during complex operations (insert/delete
8725 # character/line/screen/page), and it does not signal this over the
8726 # RS232 cable. The typical symptom of an overrun is that the terminal
8727 # starts beeping, and output becomes garbled.
8729 # The padding delays in this terminfo were derived using tack(1)
8730 # running on a Linux box connected to a TVI-920C with a later-model
8731 # (A49C1-style) ROM running at 9600 baud, so your mileage may
8732 # vary. The numbers below seem to give the terminal enough time so
8733 # that it doesn't overflow its input buffer and start losing
8738 # If you want to use the FUNCT key on a tvi912[bc], use the
8739 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
8740 # the following table (these also work on the 920 series):
8742 # Unshifted Function Keys:
8744 # Key | capname|| Equivalent
8745 # -----|--------||------------
8746 # F1 | <kf1> || FUNCT + @
8747 # F2 | <kf2> || FUNCT + A
8748 # F3 | <kf3> || FUNCT + B
8749 # F4 | <kf4> || FUNCT + C
8750 # F5 | <kf5> || FUNCT + D
8751 # F6 | <kf6> || FUNCT + E
8752 # F7 | <kf7> || FUNCT + F
8753 # F8 | <kf8> || FUNCT + G
8754 # F9 | <kf9> || FUNCT + H
8755 # F10 | <kf10> || FUNCT + I
8756 # F11 | <kf11> || FUNCT + J
8758 # Shifted Function Keys:
8760 # SHIFT + Key | capname|| Equivalent
8761 # -------------|--------||------------
8762 # SHIFT + F1 | <kf12> || FUNCT + `
8763 # SHIFT + F2 | <kf13> || FUNCT + a
8764 # SHIFT + F3 | <kf14> || FUNCT + b
8765 # SHIFT + F4 | <kf15> || FUNCT + c
8766 # SHIFT + F5 | <kf16> || FUNCT + d
8767 # SHIFT + F6 | <kf17> || FUNCT + e
8768 # SHIFT + F7 | <kf18> || FUNCT + f
8769 # SHIFT + F8 | <kf19> || FUNCT + g
8770 # SHIFT + F9 | <kf20> || FUNCT + h
8771 # SHIFT + F10 | <kf21> || FUNCT + i
8772 # SHIFT + F11 | <kf22> || FUNCT + j
8774 # PORTS AND SWITCH SETTINGS
8776 # Here are the switch settings for the TVI-912B/TVI-920B and
8777 # TVI-912C/TVI-920C:
8779 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
8780 # 2: 9600 3: 4800 4: 2400 5: 1200
8781 # 6: 600 7: 300 8: 150 9: 75
8784 # S2 UART/Terminal options:
8786 # 1: Not used Not allowed
8787 # 2: Alternate character set Standard character set
8788 # 3: Full duplex Half duplex
8789 # 4: 50 Hz refresh 60 Hz refresh
8790 # 5: No parity Send parity
8791 # 6: 2 stop bits 1 stop bit
8792 # 7: 8 data bits 7 data bits
8793 # 8: Not used Not allowed on Rev E or lower
8794 # 9: Even parity Odd parity
8795 # 10: Steady cursor Blinking cursor
8796 # (On Rev E or lower, use W25 instead of switch 10.)
8798 # S5 UART/Terminal options:
8800 # 1: P3-6 Not connected DSR received on P3-6
8801 # 2: P3-8 Not connected DCD received on P3-8
8803 # 3 Open, 4 Open: P3-20 Not connected
8804 # 3 Open, 4 Closed: DTR on when terminal is on
8805 # 3 Closed, 4 Open: DTR is connected to RTS
8806 # 3 Closed, 4 Closed: Not allowed
8808 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
8809 # all data transmitted out of the modem port (P3) will also be
8810 # transmitted out of the printer port (P4).
8812 # 6 Open, 7 Open: Not allowed
8813 # 6 Open, 7 Closed: 20ma current loop input
8814 # 6 Closed, 7 Open: RS232 input
8815 # 6 Closed, 7 Closed: Not allowed
8818 # If the jumper is installed, the effect will occur (the next time the terminal
8821 # S4/W31: Enables automatic LF upon receipt of CR from
8822 # remote or keyboard.
8823 # S4/W32: Enables transmission of EOT at the end of Send. If not
8824 # installed, a carriage return is sent.
8825 # S4/W33: Disables automatic carriage return in column 80.
8826 # S4/W34: Selects Page Print Mode as initial condition. If not
8827 # installed, Extension Mode is selected.
8829 # NON-STANDARD CAPABILITIES
8831 # Sending <u9> or <u7> returns a cursor position report in the format
8832 # YX\r, where Y and X are as in <cup>. This format is described in
8833 # <u8> and <u6>, but it's not clear how one should write an
8834 # appropriate scanf string, since we need to subtract %' ' from the
8835 # character after reading it. The <u9> capability is used by tack(1)
8836 # to synchronize during padding tests, and seems to work for that
8839 # This description also includes the obsolete termcap capabilities
8840 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
8842 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
8844 # The FUNCT modifier actually works with every normal key by sending
8845 # ^AX\r, where X is the sequence normally sent by that key. This is a
8846 # sort of meta key not currently describable in terminfo.
8848 # There are quite a few other keys (especially on the 920 models,) but
8849 # they are for the most part only useful in block mode.
8851 # These terminals have lots of forms manipulation features, mainly
8852 # useful in block mode, including "clear X to nulls" (vs. "clear X to
8853 # spaces"; nulls are sentinels for "send X" operations); "send X"
8854 # operations for uploading all or part of the screen; and block-mode
8855 # editing keys (they don't send escape sequences, but manipulate video
8856 # memory directly). Block mode is used for local editing, and protect
8857 # mode (in conjunction with the "write protect" attribute,
8858 # a.k.a. half-intensity outside of protect mode) is used to control
8859 # which parts of the screen are edited/sent/printed (by <mc0>).
8861 # There are at least two major families of ROM, "early" and
8862 # A49B1/A49C1; the major difference seems to be that the latter ROMs
8863 # support a few extra escape sequences for manipulating the off-screen
8864 # memory page, and for sending whole pages back to the host (mainly
8865 # useful in block mode.) The descriptions in this file don't use any
8866 # of those sequences: set cursor position including page (\E-PYX,
8867 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
8868 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
8869 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
8870 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
8871 # are as in <cup>, and some "send page" features mainly useful for
8872 # forms manipulation.
8874 # The keyboard enable (\E") and disable (\E#) sequences are unused,
8875 # except that a terminal reset (<is2>) enables the keyboard.
8877 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
8878 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
8882 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
8883 # sequences (I infer that in some TeleVideo terminal they may invert
8884 # and uninvert the display) so the <flash> sequence given here is a
8885 # cheesy page-flip instead.
8887 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
8888 # tack(1), so it is not included in the descriptions below.
8890 # It's not clear whether auto_left_margin (<bw>) flag should be set
8891 # for these terminals; tack says yes, so it is set here, but this
8892 # differs from other descriptions I've seen.
8894 # Extension print mode (<mc5>) echoes all characters to the printer
8895 # port [in addition to displaying them] except for the page print mode
8896 # sequence (<mc4>); this is a slight violation of the terminfo
8897 # definition for <mc5> but I don't expect it to cause problems. We
8898 # reset to page print mode in <rs1> since it may have been enabled
8901 # The descriptions with plus signs (+) are building blocks.
8903 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
8905 cols#80, it#8, lines#24,
8906 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8907 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
8908 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
8909 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
8910 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
8911 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
8912 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
8913 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
8914 u7=\E?, u8=%c%c\r, u9=\E?,
8916 # This isn't included in the basic capabilities because it is
8917 # typically unusable in combination with the full range of video
8918 # attributes, since the magic cookie attributes turn into ASCII
8919 # control characters, and the half-intensity ("protected") attribute
8920 # converts all affected characters to spaces.
8922 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
8925 # This uses half-intensity mode (<dim>) for standout (<smso>), and
8926 # exposes no other attributes (half-intensity is the only attribute
8927 # that does not generate a magic cookie.)
8929 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
8931 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
8934 # Full magic-cookie attribute support, with half-intensity reverse
8935 # video for standout. Note that we add a space in the <dim> sequence
8936 # to give a consistent magic-cookie count. Also note that <sgr> uses
8937 # backspacing (in the TVI-supported order) to apply all requested
8938 # attributes with only a single magic cookie.
8940 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
8942 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
8944 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
8945 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
8947 # This uses the second page memory option to save & restore screen
8948 # contents. If your terminal is missing the option, this description
8949 # should still work, but that has not been tested.
8951 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
8952 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
8953 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
8955 # This simulates flashing by briefly toggling to the other page
8958 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
8959 bel=\EK$<100>\EK, use=tvi912b+2p,
8961 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
8963 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
8964 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
8965 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
8966 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
8967 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8968 kf8=^AG\r, kf9=^AH\r,
8970 # Combinations of the basic building blocks
8972 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
8973 use=tvi912b+2p, use=tvi912b-unk,
8975 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
8976 use=tvi912b+vb, use=tvi912b-unk,
8978 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
8979 use=tvi912b+printer, use=tvi912b-unk,
8981 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
8982 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
8984 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
8985 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
8987 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
8988 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
8990 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
8991 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
8993 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
8994 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
8996 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
8997 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
8999 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
9000 use=tvi912b+dim, use=tvi912b-unk,
9002 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
9003 use=tvi912b+mc, use=tvi912b-unk,
9005 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
9006 use=tvi920b+fn, use=tvi912b-unk,
9008 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
9009 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
9011 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
9012 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
9014 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
9015 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
9017 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
9018 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
9021 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
9022 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
9025 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
9026 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
9029 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
9030 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
9033 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
9034 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
9037 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
9038 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
9041 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
9042 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
9044 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
9045 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
9047 # Televideo 921 and variants
9048 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
9049 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
9050 # also added empty <acsc> to suppress tic warning -- esr)
9051 tvi921|televideo model 921 with sysline same as page & real vi function,
9052 OTbs, OTpt, am, hs, xenl, xhp,
9053 cols#80, lines#24, xmc#0,
9054 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
9055 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
9056 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
9057 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
9058 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
9059 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
9060 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
9061 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
9062 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
9063 # without the beeper
9064 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
9065 # also added empty <acsc> to suppress tic warning -- esr)
9066 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
9068 cols#80, lines#24, xmc#0,
9069 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
9070 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
9071 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
9072 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
9073 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
9074 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
9075 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
9076 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
9077 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
9078 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
9079 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
9080 dl1=\ER$<2*/>, il1=\EE$<2*/>,
9081 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
9082 kil1=\EE$<2*/>, use=tvi92B,
9084 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
9085 # in from a BSD termcap file because it looks like they do something the
9086 # old ones skip -- esr)
9087 tvi924|televideo tvi924,
9088 am, bw, hs, in, mir, msgr, xenl, xon,
9089 cols#80, it#8, lines#24, wsl#80, xmc#0,
9090 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
9091 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
9092 cub1=^H, cud1=^V, cuf1=^L,
9093 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
9094 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
9095 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
9096 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
9097 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
9098 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
9099 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
9100 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
9101 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
9102 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
9103 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
9104 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
9105 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
9108 # TVI925 DIP switches. In each of these, D = Down and U = Up,
9110 # Here are the settings for the external (baud) switches (S1):
9113 # 7 8 9 10 [Printer]
9114 # 1 2 3 4 [Main RS232]
9115 # -----------------------------------------------------
9134 # Settings for word length and stop-bits (S1)
9136 # Position Description
9138 # ---------------------------
9145 # S2 (external) settings
9147 # Position Up Dn Description
9148 # --------------------------------------------
9150 # X Duplex edit (transmit editing keys)
9151 # --------------------------------------------
9152 # 2 X 912/920 emulation
9154 # --------------------------------------------
9158 # --------------------------------------------
9162 # --------------------------------------------
9166 # --------------------------------------------
9170 # --------------------------------------------
9174 # --------------------------------------------
9175 # 6 X White on black display
9176 # X Black on white display
9177 # --------------------------------------------
9180 # --------------------------------------------
9183 # --------------------------------------------
9186 # --------------------------------------------
9189 # --------------------------------------------
9190 # 10 X CR/LF (Auto LF)
9193 # S3 (internal switch) settings:
9195 # Position Up Dn Description
9196 # --------------------------------------------
9199 # --------------------------------------------
9202 # --------------------------------------------
9205 # --------------------------------------------
9208 # --------------------------------------------
9211 # --------------------------------------------
9212 # 4 X Blinking block cursor
9214 # --------------------------------------------
9215 # 4 X Blinking underline cursor
9217 # --------------------------------------------
9218 # 4 X Steady block cursor
9220 # --------------------------------------------
9221 # 4 X Steady underline cursor
9223 # --------------------------------------------
9224 # 6 X Screen blanking timer (ON)
9225 # X Screen blanking timer (OFF)
9226 # --------------------------------------------
9227 # 7 X Page attributes
9229 # --------------------------------------------
9230 # 8 X DCD disconnected
9232 # --------------------------------------------
9233 # 9 X DSR disconnected
9235 # --------------------------------------------
9236 # 10 X DTR Disconnected
9238 # --------------------------------------------
9240 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
9241 tvi925|televideo 925,
9242 OTbs, am, bw, hs, ul,
9243 cols#80, lines#24, xmc#1,
9244 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
9245 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9246 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
9247 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
9248 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
9249 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
9250 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9251 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9252 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
9253 tsl=\Eh\Ef, use=adm+sgr,
9254 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
9255 # to avoid "magic cookie" standout glitch:
9256 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
9258 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
9260 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
9261 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
9262 # for additional capabilities,
9263 # The following tvi descriptions from B:pjphar and virus!mike
9264 # is for all 950s. It sets the following attributes:
9265 # full duplex (\EDF) write protect off (\E()
9266 # conversation mode (\EC) graphics mode off (\E%)
9267 # white on black (\Ed) auto page flip off (\Ew)
9268 # turn off status line (\Eg) clear status line (\Ef\r)
9269 # normal video (\E0) monitor mode off (\EX or \Eu)
9270 # edit mode (\Er) load blank char to space (\Ee\040)
9271 # line edit mode (\EO) enable buffer control (^O)
9272 # protect mode off (\E\047) duplex edit keys (\El)
9273 # program unshifted send key to send line all (\E016)
9274 # program shifted send key to send line unprotected (\E004)
9275 # set the following to nulls:
9276 # field delimiter (\Ex0\200\200)
9277 # line delimiter (\Ex1\200\200)
9278 # start-protected field delimiter (\Ex2\200\200)
9279 # end-protected field delimiter (\Ex3\200\200)
9280 # set end of text delimiter to carriage return/null (\Ex4\r\200)
9282 # TVI 950 Switch Setting Reference Charts
9286 # S1 1 2 3 4 5 6 7 8 9 10
9287 # +-----------------------+-----+-----+-----------------------+
9288 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
9290 # +------+-----------------------+-----+-----+-----------------------+
9291 # | Up | See | 7 | 2 | See |
9292 # +------+-----------------------+-----+-----+-----------------------+
9293 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
9294 # +------+-----------------------+-----+-----+-----------------------+
9297 # S2 1 2 3 4 5 6 7 8 9 10
9298 # +-----+-----+-----------------+-----+-----------+-----+-----+
9299 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
9300 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9301 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
9302 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9303 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
9304 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9308 # +-----------+-----+-----+-----+-----+-----------+
9309 # | Display | 1 | 2 | 3 | 4 | Baud |
9310 # +-----------+-----+-----+-----+-----+ |
9311 # | Printer | 7 | 8 | 9 | 10 | Rate |
9312 # +-----------+-----+-----+-----+-----+-----------+
9313 # | D | D | D | D | 9600 |
9314 # | U | D | D | D | 50 |
9315 # | D | U | D | D | 75 |
9316 # | U | U | D | D | 110 |
9317 # | D | D | U | D | 135 |
9318 # | U | D | U | D | 150 |
9319 # | D | U | U | D | 300 |
9320 # | U | U | U | D | 600 |
9321 # | D | D | D | U | 1200 |
9322 # | U | D | D | U | 1800 |
9323 # | D | U | D | U | 2400 |
9324 # | U | U | D | U | 3600 |
9325 # | D | D | U | U | 4800 |
9326 # | U | D | U | U | 7200 |
9327 # | D | U | U | U | 9600 |
9328 # | U | U | U | U | 19200 |
9329 # +-----+-----+-----+-----+-----------+
9332 # +-----+-----+-----+-----------+
9333 # | 3 | 4 | 5 | Parity |
9334 # +-----+-----+-----+-----------+
9335 # | X | X | D | None |
9336 # | D | D | U | Odd |
9337 # | D | U | U | Even |
9338 # | U | D | U | Mark |
9339 # | U | U | U | Space |
9340 # +-----+-----+-----+-----------+
9344 # +-----+-----+-----------------+
9345 # | 7 | 8 | Communication |
9346 # +-----+-----+-----------------+
9347 # | D | D | Half Duplex |
9348 # | D | U | Full Duplex |
9351 # +-----+-----+-----------------+
9353 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
9354 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
9355 # should be present and all tvi native modes use the same string for this.
9356 # Finally, note that BSD has cud1=^V. -- esr)
9357 tvi950|televideo 950,
9358 OTbs, am, hs, mir, msgr, xenl, xon,
9359 cols#80, it#8, lines#24, xmc#1,
9360 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
9361 cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9362 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9363 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
9364 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
9366 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
9367 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
9368 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
9369 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9370 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9371 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
9372 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
9375 # is for 950 with two pages adds the following:
9376 # set 48 line page (\E\\2)
9377 # place cursor at page 0, line 24, column 1 (\E-07 )
9378 # set local (no send) edit keys (\Ek)
9380 # two page 950 adds the following:
9381 # when entering ex, set 24 line page (\E\\1)
9382 # when exiting ex, reset 48 line page (\E\\2)
9383 # place cursor at 0,24,1 (\E-07 )
9384 # set duplex (send) edit keys (\El) when entering vi
9385 # set local (no send) edit keys (\Ek) when exiting vi
9387 tvi950-2p|televideo950 w/2 pages,
9388 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
9389 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9390 smkx=\El, use=tvi950,
9392 # is for 950 with four pages adds the following:
9393 # set 96 line page (\E\\3)
9394 # place cursor at page 0, line 24, column 1 (\E-07 )
9396 # four page 950 adds the following:
9397 # when entering ex, set 24 line page (\E\\1)
9398 # when exiting ex, reset 96 line page (\E\\3)
9399 # place cursor at 0,24,1 (\E-07 )
9401 tvi950-4p|televideo950 w/4 pages,
9402 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
9403 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9404 smkx=\El, use=tvi950,
9406 # <is2> for reverse video 950 changes the following:
9407 # set reverse video (\Ed)
9409 # set vb accordingly (\Ed ...delay... \Eb)
9411 tvi950-rv|televideo950 rev video,
9412 flash=\Ed$<200/>\Eb,
9413 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
9416 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
9417 tvi950-rv-2p|televideo950 rev video w/2 pages,
9418 flash=\Ed$<200/>\Eb,
9419 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
9420 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9421 smkx=\El, use=tvi950,
9423 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
9424 tvi950-rv-4p|televideo950 rev video w/4 pages,
9425 flash=\Ed$<200/>\Eb,
9426 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
9427 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9428 smkx=\El, use=tvi950,
9429 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
9430 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
9431 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
9432 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
9433 # the :ko: string had :cl: in it, which means that one of the original
9434 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
9435 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
9436 # ko implies -- esr)
9437 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
9439 tvi955|televideo 955,
9442 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
9443 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
9444 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
9445 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
9446 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
9447 rmam=\E[=7l, rmxon=^N,
9448 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
9449 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
9451 tvi955-w|955-w|televideo955 w/132 cols,
9453 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
9454 # use half-intensity as normal mode, full intensity as <bold>
9455 tvi955-hb|955-hb|televideo955 half-bright,
9456 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
9457 sgr0=\EG0\E[=5h, use=tvi955,
9458 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
9459 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
9460 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
9461 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
9462 # it does to the function keys. I deduced <rmam>/<smam>.
9463 # also added empty <acsc> to suppress tic warning, -- esr)
9464 tvi970|televideo 970,
9465 OTbs, OTpt, am, da, db, mir, msgr,
9466 cols#80, it#8, lines#24,
9467 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
9468 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
9469 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
9470 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
9471 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
9472 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
9473 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9474 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
9475 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
9476 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
9477 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
9478 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
9479 smul=\E[4m, vpa=\E[%i%p1%dd,
9480 tvi970-vb|televideo 970 with visual bell,
9481 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
9483 tvi970-2p|televideo 970 with using 2 pages of memory,
9484 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
9486 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
9487 # per line (rather than 40), Esc K chooses the normal character set. Not sure
9488 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
9489 # <smul> strings are klutzy, but at least use no screen space.
9490 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
9491 # its absence means <smam>=\Ev isn't safe to use. -- esr)
9492 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
9493 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
9494 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
9495 tvipt|televideo personal terminal,
9498 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
9499 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
9500 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
9501 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
9502 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
9503 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
9504 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
9505 tvi9065|televideo 9065,
9506 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
9507 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
9509 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
9510 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
9511 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
9512 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
9513 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
9514 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
9515 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
9516 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
9517 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
9518 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
9520 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
9521 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
9522 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
9523 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
9524 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9525 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
9526 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
9527 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
9528 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
9529 pfx=\E|%p1%{48}%+%c1%p2%s\031,
9530 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
9531 rep=\E[%p2%db%p1%c, rev=\EG4,
9532 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
9533 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
9534 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
9535 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
9536 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
9537 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
9538 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?%p9%t\E$%e\E%%%;,
9539 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
9540 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
9541 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
9545 # In September 1993, Visual Technology of Westboro, Massachusetts,
9546 # merged with White Pine Software of Nashua, New Hampshire.
9548 # White Pine Software may be contacted at +1 603/886-9050.
9549 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
9552 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
9553 # Recently I hacked together the following termcap for Visual
9554 # Technology's Visual 50 terminal. It's a slight modification of
9556 # It's intended to run when the Visual 50 is in vt52 emulation mode
9557 # (I know what you're thinking; if it's emulating a vt52, then why
9558 # another termcap? Well, it turns out that the Visual 50 can handle
9559 # <dl1> and db(?) among other things, which the vt52 can't)
9560 # The termcap works OK for the most part. The only problem is on
9561 # character inserts. The whole line gets painfully redrawn for each
9562 # character typed. Any suggestions?
9563 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
9564 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
9565 # disguise; <kf7>-<kf9> are really l1-l3.
9567 OTbs, OTpt, am, da, db, msgr,
9568 cols#80, it#8, lines#24,
9569 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
9570 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
9571 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
9572 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
9573 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
9574 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
9575 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
9576 # this one was BSD & SCO's vi50
9577 vi50adm|visual 50 in adm3a mode,
9579 cols#80, it#8, lines#24,
9580 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9581 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
9582 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
9583 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
9585 # From: Jeff Siegal <jbs@quiotix.com>
9587 OTbs, am, mir, msgr,
9588 cols#80, it#8, lines#24,
9589 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
9590 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
9591 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
9592 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
9593 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
9596 # Visual 200 from BRL
9597 # The following switch settings are assumed for normal operation:
9598 # FULL_DUPLEX SCROLL CR
9599 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
9600 # Other switches may be set for operator convenience or communication
9602 # Character insertion is kludged in order to get around the "beep" misfeature.
9603 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
9604 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
9605 # and <dl1> strings, but we seem to get along fine without them.
9607 OTbs, OTpt, am, mir, msgr,
9608 OTkn#10, cols#80, it#8, lines#24,
9609 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
9610 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
9611 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
9612 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
9613 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
9614 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
9615 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
9616 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
9617 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
9618 rmacs=\EG, rmkx=\E>, rmso=\E3,
9619 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
9620 smkx=\E=, smso=\E4, tbc=\Eg,
9621 # The older Visuals didn't come with function keys. This entry uses
9622 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
9623 # If your version of vi doesn't support function keys you may want
9625 vi200-f|visual 200 no function keys,
9626 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
9627 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
9628 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
9630 vi200-rv|visual 200 reverse video,
9631 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
9633 # the function keys are programmable but we don't reprogram them to their
9634 # default values with <is2> because programming them is very verbose. maybe
9635 # an initialization file should be made for the 300 and they could be stuck
9637 # (vi300: added <rmam>/<smam> based on init string -- esr)
9638 vi300|visual 300 ansi x3.64,
9641 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
9642 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
9643 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
9645 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
9646 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9647 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
9648 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
9649 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
9650 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
9651 smso=\E[1m, smul=\E[4m,
9652 # some of the vi300s have older firmware that has the command
9653 # sequence for setting editing extent reversed.
9654 vi300-old|visual 300 with old firmware (set edit extent reversed),
9655 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
9658 # Visual 500 prototype entry from University of Wisconsin.
9659 # The best place to look for the escape sequences is page A1-1 of the
9660 # Visual 500 manual. The initialization sequence given here may be
9661 # overkill, but it does leave out some of the initializations which can
9662 # be done with the menus in set-up mode.
9663 # The :xp: line below is so that emacs can understand the padding requirements
9664 # of this slow terminal. :xp: is 10 time the padding factor.
9665 # (vi500: removed unknown :xp#4: termcap;
9666 # also added empty <acsc> to suppress tic warning -- esr)
9669 cols#80, it#8, lines#33,
9670 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
9671 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
9672 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
9673 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
9674 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
9676 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
9677 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
9678 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
9679 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
9681 # The visual 550 is a visual 300 with tektronix graphics,
9682 # and with 33 lines. clear screen is modified here to
9683 # also clear the graphics.
9684 vi550|visual 550 ansi x3.64,
9686 clear=\030\E[H\E[2J, use=vi300,
9688 vi603|visual603|visual 603,
9690 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
9691 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
9692 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
9693 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
9694 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
9695 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
9696 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
9702 # 3471 North First Street
9703 # San Jose, CA 95134
9704 # Vox: (408)-473-1200
9705 # Fax: (408) 473-1222
9706 # Web: http://www.wyse.com
9708 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
9709 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
9710 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
9711 # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
9713 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
9714 # They now own the Qume and Amdek brands, too. So these are the people to
9715 # talk with about all Link, Qume, and Amdek terminals.
9717 # These entries include a few small fixes.
9718 # I canceled the bel capacities in the vb entries.
9719 # I made two trivial syntax fixes in the wyse30 entry.
9720 # I made some entries relative to adm+sgr.
9723 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
9725 # Although the Wyse 30 can support more than one attribute
9726 # it requires magic cookies to do so. Many applications do not
9727 # function well with magic cookies. The following terminfo uses
9728 # the protect mode to support one attribute (dim) without cookies.
9729 # If more than one attribute is needed then the wy30-mc terminfo
9732 wy30|wyse30|Wyse 30,
9733 am, bw, hs, mc5i, mir, msgr, xon,
9734 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
9735 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
9736 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
9737 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9738 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
9739 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
9740 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
9741 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
9742 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
9743 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
9744 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9745 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
9746 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
9747 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
9748 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
9749 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
9750 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9751 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
9752 smso=\E`7\E), tbc=\E0, tsl=\EF,
9754 # This terminal description uses the non-hidden attribute mode
9755 # (with magic cookie).
9757 # (wy30-mc: added <smcup> to suppress tic warning --esr)
9758 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
9761 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
9762 rmcup=\EG0, rmso=\EG0,
9763 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9764 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
9765 smso=\EG4, use=wy30, use=adm+sgr,
9766 # The mandatory pause used by <flash> does not work with
9767 # older versions of terminfo. If you see this effect then
9768 # unset xon and delete the / from the delay.
9769 # i.e. change $<100/> to $<100>
9770 wy30-vb|wyse30-vb|wyse 30 visible bell,
9773 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
9774 # Normal) without magic cookies by using the protect mode.
9775 # The following description uses this feature, but when more
9776 # than one attribute is put on the screen at once, all attributes
9777 # will be changed to be the same as the last attribute given.
9778 # The Wyse 50 can support more attributes when used with magic
9779 # cookies. The wy50-mc terminal description uses magic cookies
9780 # to correctly handle multiple attributes on a screen.
9782 wy50|wyse50|Wyse 50,
9783 am, bw, hs, mc5i, mir, msgr, xon,
9784 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
9785 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
9786 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
9787 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9788 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
9789 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
9790 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
9791 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
9792 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
9793 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
9794 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
9795 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9796 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9797 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
9798 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
9799 pfx=\Ez%p1%{63}%+%c%p2%s\177,
9800 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
9801 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
9802 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9803 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
9804 smso=\E`6\E), tbc=\E0, tsl=\EF,
9806 # This terminal description uses the non-hidden attribute mode
9807 # (with magic cookie).
9809 # The mandatory pause used by flash does not work with some
9810 # older versions of terminfo. If you see this effect then
9811 # unset <xon> and delete the / from the delay.
9812 # i.e. change $<100/> to $<100>
9813 # (wy50-mc: added <smcup> to suppress tic warning --esr)
9814 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
9817 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
9818 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
9819 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9820 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
9821 smso=\EGt, use=wy50, use=adm+sgr,
9822 wy50-vb|wyse50-vb|wyse 50 visible bell,
9824 wy50-w|wyse50-w|wyse 50 132-column,
9825 cols#132, lw#7, nlab#16, wsl#97,
9826 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
9828 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
9832 # The Wyse 350 is a Wyse 50 with color.
9833 # Unfortunately this means that it has magic cookies.
9834 # The color attributes are designed to overlap the reverse, dim and
9835 # underline attributes. This is nice for monochrome applications
9836 # because you can make underline stuff green (or any other color)
9837 # but for true color applications it's not so hot because you cannot
9838 # mix color with reverse, dim or underline.
9839 # To further complicate things one of the attributes must be
9840 # black (either the foreground or the background). In reverse video
9841 # the background changes color with black letters. In normal video
9842 # the foreground changes colors on a black background.
9843 # This terminfo uses some of the more advanced features of curses
9844 # to display both color and blink. In the final analysis I am not
9845 # sure that the wy350 runs better with this terminfo than it does
9846 # with the wy50 terminfo (with user adjusted colors).
9848 # The mandatory pause used by flash does not work with
9849 # older versions of terminfo. If you see this effect then
9850 # unset xon and delete the / from the delay.
9851 # i.e. change $<100/> to $<100>
9853 # Bug: The <op> capability resets attributes.
9854 wy350|wyse350|Wyse 350,
9855 am, bw, hs, mc5i, mir, xon,
9856 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
9858 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
9859 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
9860 cub1=^H, cud1=^J, cuf1=^L,
9861 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
9862 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
9863 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
9864 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
9865 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
9866 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
9867 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
9868 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
9869 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9870 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9871 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
9872 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
9873 pfx=\Ez%p1%{63}%+%c%p2%s\177,
9874 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
9875 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
9876 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
9877 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
9878 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
9879 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
9880 wy350-vb|wyse350-vb|wyse 350 visible bell,
9882 wy350-w|wyse350-w|wyse 350 132-column,
9883 cols#132, lw#7, nlab#16, wsl#97,
9884 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
9886 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
9889 # This terminfo description is untested.
9890 # The wyse100 emulates an adm31, so the adm31 entry should work.
9894 cols#80, lines#24, xmc#1,
9895 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9896 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9897 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
9898 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
9899 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
9900 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
9901 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
9903 # The Wyse 120/150 has most of the features of the Wyse 60.
9904 # This terminal does not need padding up to 9600 baud!
9905 # <msgr> should be set but the clear screen fails when in
9906 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
9909 wy120|wyse120|wy150|wyse150|Wyse 120/150,
9910 am, bw, hs, km, mc5i, mir, msgr, xon,
9911 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
9912 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9913 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
9914 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9915 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
9916 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
9917 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
9918 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
9919 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
9920 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
9921 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9922 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
9923 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
9924 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9925 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
9926 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
9927 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
9928 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
9929 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
9930 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
9931 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
9932 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
9934 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
9935 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
9936 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
9937 tbc=\E0, tsl=\EF, use=adm+sgr,
9939 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
9940 cols#132, lw#7, nlab#16, wsl#97,
9941 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
9942 rs2=\E`;$<70>, use=wy120,
9944 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
9945 lh@, lines#25, lw@, nlab@,
9946 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
9948 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
9949 lh@, lines#25, lw@, nlab@,
9950 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
9952 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
9955 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
9958 # The Wyse 60 is like the Wyse 50 but with more padding.
9959 # The reset strings are slow and the pad times very depending
9960 # on other parameters such as font loading. I have tried
9961 # to follow the following outline:
9963 # <rs1> -> set personality
9964 # <rs2> -> set number of columns
9965 # <rs3> -> set number of lines
9966 # <is1> -> select the proper font
9967 # <is2> -> do the initialization
9968 # <is3> -> set up display memory (2 pages)
9970 # The Wyse 60's that have vt100 emulation are slower than the
9971 # older Wyse 60's. This change happened mid-1987.
9972 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
9974 # The meta key is only half right. This terminal will return the
9975 # high order bit set when you hit CTRL-function_key
9977 # It may be useful to assign two function keys with the
9978 # values \E=(\s look at old data in page 1
9979 # \E=W, look at bottom of page 1
9980 # where \s is a space ( ).
9983 # The Wyse 60 runs faster when the XON/XOFF
9984 # handshake is turned off.
9986 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
9987 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
9988 wy60|wyse60|Wyse 60,
9989 am, bw, hs, km, mc5i, mir, msgr,
9990 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
9991 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
9992 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
9993 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
9994 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9995 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
9996 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
9997 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
9998 ip=$<3>, is1=\EcB0\EcC1,
9999 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
10000 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10001 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10002 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10003 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10004 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10005 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10006 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
10007 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
10008 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10009 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10010 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
10011 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
10012 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
10013 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
10014 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
10015 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10016 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10017 tbc=\E0, tsl=\EF, use=adm+sgr,
10019 wy60-w|wyse60-w|wyse 60 132-column,
10020 cols#132, lw#7, nlab#16, wsl#97,
10021 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
10022 rs2=\EeF$<150>\E`;$<150>, use=wy60,
10024 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
10025 lh@, lines#25, lw@, nlab@,
10026 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
10027 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
10028 lh@, lines#25, lw@, nlab@,
10029 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
10031 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
10033 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
10034 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
10035 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
10036 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
10037 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
10038 cols#132, lw#7, nlab#16, wsl#97,
10039 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
10040 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
10041 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
10043 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
10044 lh@, lines#43, lw@, nlab@,
10045 pln@, rs3=\Ee+$<150>, use=wy60-42,
10046 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
10047 lh@, lines#43, lw@, nlab@,
10048 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
10050 wy60-vb|wyse60-vb|Wyse 60 visible bell,
10052 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
10055 # The Wyse-99GT looks at lot like the Wyse 60 except that it
10056 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
10057 # setup parameter controls the number of lines on the screen.
10058 # For the Wyse 99GT the "lines" setup parameter controls the
10059 # number of lines in a page. The screen can display 25 lines max.
10060 # The Wyse-99GT also has personalities for the VT220 and
10061 # Tektronix 4014. But this has no bearing on the native mode.
10063 # (msgr) should be set but the clear screen fails when in
10064 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
10065 # then set msgr, else use msgr@.
10067 # u0 -> enter Tektronix mode
10068 # u1 -> exit Tektronix mode
10070 wy99gt|wyse99gt|Wyse 99gt,
10072 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
10073 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
10074 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
10075 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
10076 u0=\E~>\E8, u1=\E[42h, use=wy60,
10078 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
10079 cols#132, lw#7, nlab#16, wsl#97,
10080 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
10081 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
10084 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
10085 lh@, lines#25, lw@, nlab@,
10086 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
10088 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
10089 lh@, lines#25, lw@, nlab@,
10090 pln@, rs2=\E`;$<150>, use=wy99gt-w,
10092 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
10095 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
10096 bel@, use=wy99gt-w,
10098 # Can't set tabs! Other bugs (ANSI mode only):
10099 # - can't redefine function keys (anyway, key redefinition in ANSI mode
10100 # is too much complex to be described);
10101 # - meta key can't be described (the terminal forgets it when reset);
10102 # The xon-xoff handshaking can't be disabled while in ansi personality, so
10103 # emacs can't work at speed greater than 9600 baud. No padding is needed at
10105 # dch1 has been commented out because it causes annoying glittering when
10106 # vi deletes one character at the beginning of a line with tabs in it.
10107 # dch makes sysgen(1M) have a horrible behaviour when deleting
10108 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
10109 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
10110 # not, so smir and rmir are commented out as well.
10111 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10112 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
10113 am, km, mc5i, mir, msgr, xenl,
10114 cols#80, it#8, lines#25, vt#3,
10115 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
10116 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10117 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
10118 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
10119 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
10120 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
10121 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
10122 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
10123 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
10124 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
10125 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
10126 il1=\E[L, ind=\n$<1>, invis=\E[8m,
10127 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
10128 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10129 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
10130 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
10131 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
10132 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
10133 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
10134 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
10135 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10136 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
10137 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
10139 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
10140 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
10141 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
10143 # This is the american terminal. Here tabs work fine.
10144 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10145 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
10146 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
10148 # This terminal (firmware version 02) has a lot of bugs:
10149 # - can't set tabs;
10150 # - other bugs in ANSI modes (see above).
10151 # This description disables handshaking when using cup. This is because
10152 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
10153 # cannot be used at speeds greater than 9600 baud, because at greater
10154 # speeds handshaking is needed even for character sending. If you use
10155 # DTR handshaking, you can use even greater speeds.
10156 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10157 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
10158 am, bw, hs, km, mc5i, mir, msgr, xon,
10159 cols#80, it#8, lines#25, wsl#46,
10160 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
10161 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
10162 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
10163 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10164 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
10165 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
10166 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
10167 ind=^J, invis=\EG3,
10168 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
10169 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
10170 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
10171 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
10172 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
10173 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
10174 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
10175 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
10176 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
10177 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
10178 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
10179 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
10180 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
10181 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
10183 # This is the american terminal. Here tabs work.
10184 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10185 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
10186 hts=\E1, tbc=\E0, use=wy99f,
10189 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
10190 # The reset strings are slow and the pad times very depending
10191 # on other parameters such as font loading. I have tried
10192 # to follow the following outline:
10194 # <rs1> -> set personality
10195 # <rs2> -> set number of columns
10196 # <rs3> -> set number of lines
10197 # <is1> -> select the proper font
10198 # <is2> -> do the initialization
10199 # <is3> -> set up display memory (2 pages)
10201 # The display memory may be used for either text or graphics.
10202 # When "Display Memory = Shared" the terminal will have more pages
10203 # but garbage may be left on the screen when you switch from
10204 # graphics to text. If "Display Memory = Unshared" then the
10205 # text area will be only one page long.
10207 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
10208 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
10209 wy160|wyse160|Wyse 160,
10210 am, bw, hs, km, mc5i, mir, msgr,
10211 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
10212 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10213 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
10214 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10215 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
10216 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
10217 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
10218 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
10219 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
10220 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10221 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10222 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10223 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10224 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10225 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10226 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
10227 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
10228 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10229 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10230 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
10231 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
10232 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
10233 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
10234 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
10235 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10236 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10237 tbc=\E0, tsl=\EF, use=adm+sgr,
10239 wy160-w|wyse160-w|wyse 160 132-column,
10240 cols#132, lw#7, nlab#16, wsl#90,
10241 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
10242 rs2=\EeF$<150>\E`;$<150>, use=wy160,
10244 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
10245 lh@, lines#25, lw@, nlab@,
10246 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
10247 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
10248 lh@, lines#25, lw@, nlab@,
10249 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
10251 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
10253 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
10254 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
10255 rs3=\Ee*$<150>, use=wy160,
10256 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
10257 cols#132, lw#7, nlab#16, wsl#90,
10258 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
10259 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
10261 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
10262 lh@, lines#43, lw@, nlab@,
10263 pln@, rs3=\Ee+$<150>, use=wy160-42,
10264 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
10265 lh@, lines#43, lw@, nlab@,
10266 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
10268 wy160-vb|wyse160-vb|Wyse 160 visible bell,
10270 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
10273 # The Wyse 75 is a vt100 lookalike without advanced video.
10275 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
10276 # Underline) without magic cookies. The following description
10277 # uses this capability, but when more than one attribute is
10278 # put on the screen at once, all attributes will be changed
10279 # to be the same as the last attribute given.
10280 # The Wyse 75 can support more attributes when used with magic
10281 # cookies. The wy75-mc terminal description uses magic cookies
10282 # to correctly handle multiple attributes on a screen.
10284 wy75|wyse75|wyse 75,
10285 am, hs, mc5i, mir, msgr, xenl, xon,
10286 cols#80, lines#24, ma#1, pb#1201, wsl#78,
10287 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10288 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
10289 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
10290 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
10291 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10292 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
10293 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
10294 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
10295 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
10296 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
10297 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
10298 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
10299 ind=\n$<2>, ip=$<1>,
10300 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
10301 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
10302 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
10303 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
10304 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
10305 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
10306 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
10307 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
10308 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
10309 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
10310 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
10311 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
10312 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
10314 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
10315 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10316 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
10317 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
10319 # This terminal description uses the non-hidden attribute mode
10320 # (with magic cookie).
10322 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
10325 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
10326 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
10327 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
10328 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
10330 wy75-vb|wyse75-vb|wyse 75 with visible bell,
10333 wy75-w|wyse75-w|wyse 75 in 132 column mode,
10335 rs2=\E[35h\E[?3h$<80>, use=wy75,
10336 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
10340 # Wyse 85 emulating a vt220 7 bit mode.
10341 # 24 line screen with status line.
10343 # The vt220 mode permits more function keys but it wipes out
10344 # the escape key. I strongly recommend that <f11> be set to
10346 # The terminal may have to be set for 8 data bits and 2 stop
10347 # bits for the arrow keys to work.
10348 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
10349 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
10350 # <dch> leave trash on the screen when used without XON/XOFF.
10352 wy85|wyse85|wyse 85,
10353 am, hs, mc5i, mir, msgr, xenl, xon,
10354 cols#80, it#8, lines#24, wsl#80,
10355 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10356 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10357 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
10358 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10359 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10360 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10361 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10362 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10363 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10364 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
10365 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10366 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10367 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10368 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10369 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10370 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
10371 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
10372 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
10373 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
10374 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
10375 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
10376 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10377 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10378 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10379 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10380 rs3=\E[?5l, sc=\E7,
10381 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10382 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10383 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10384 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
10386 # Wyse 85 with visual bell.
10387 wy85-vb|wyse85-vb|wyse 85 with visible bell,
10388 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
10390 # Wyse 85 in 132-column mode.
10391 wy85-w|wyse85-w|wyse 85 in 132-column mode,
10393 rs2=\E[35h\E[?3h$<70>, use=wy85,
10395 # Wyse 85 in 132-column mode with visual bell.
10396 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
10399 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
10400 # This copes with an apparent firmware bug in the wy85. He writes:
10401 # "What I did was change leave the terminal cursor keys set to Normal
10402 # (instead of application), and change \E[ to \233 for all the keys in
10403 # terminfo. At one point, I found some reference indicating that this
10404 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
10405 # me), but I can't find that and the server under my bookmark to "Wyse
10406 # Technical" isn't responding. So there's the question of wether the wy85
10407 # terminfo should reflect the manufactuer's intended behaviour of the terminal
10409 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
10410 am, hs, mc5i, mir, msgr, xenl, xon,
10411 cols#80, it#8, lines#24, wsl#80,
10412 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10413 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10414 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
10415 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10416 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10417 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10418 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10419 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10420 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10421 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
10422 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10423 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10424 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10425 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10426 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
10427 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
10428 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
10429 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
10430 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
10431 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
10432 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
10433 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
10434 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
10435 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10436 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10437 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10438 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10439 rs3=\E[?5l, sc=\E7,
10440 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
10441 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10442 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10443 tsl=\E[40h\E7\E[25;%i%p1%dH,
10445 # Wyse 185 emulating a vt320 7 bit mode.
10447 # This terminal always displays 25 lines. These lines may be used
10448 # as 24 data lines and a terminal status line (top or bottom) or
10449 # 25 data lines. The 48 and 50 line modes change the page size
10450 # and not the number of lines on the screen.
10452 # The Compose Character key can be used as a meta key if changed
10455 wy185|wyse185|wyse 185,
10456 am, hs, km, mc5i, mir, msgr, xenl, xon,
10457 cols#80, it#8, lines#24, wsl#80,
10458 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10459 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10460 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
10461 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
10462 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10463 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10464 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
10465 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
10466 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
10467 el=\E[K, el1=\E[1K, enacs=\E)0,
10468 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
10469 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
10470 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
10471 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
10472 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
10473 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10474 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
10475 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
10476 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
10477 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
10478 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
10479 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
10480 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
10481 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
10482 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
10483 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
10484 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
10485 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
10486 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10487 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
10488 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
10489 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
10492 # Wyse 185 with 24 data lines and top status (terminal status)
10493 wy185-24|wyse185-24|wyse 185 with 24 data lines,
10495 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10498 # Wyse 185 with visual bell.
10499 wy185-vb|wyse185-vb|wyse 185+flash,
10502 # Wyse 185 in 132-column mode.
10503 wy185-w|wyse185-w|wyse 185 in 132-column mode,
10505 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
10506 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
10508 # Wyse 185 in 132-column mode with visual bell.
10509 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
10512 # wy325 terminfo entries
10513 # Done by Joe H. Davis 3-9-92
10515 # lines 25 columns 80
10517 wy325|wyse325|Wyse epc,
10518 am, bw, hs, mc5i, mir,
10519 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
10520 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10521 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
10522 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10523 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
10524 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
10525 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
10526 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
10527 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
10528 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10529 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10530 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10531 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10532 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10533 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
10534 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
10535 mc0=\EP, mc4=^T, mc5=\Ed#,
10536 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10537 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10538 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
10539 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
10540 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
10541 rs3=\EwG\Ee($<100>,
10542 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
10543 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10544 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
10545 tsl=\EF, use=adm+sgr,
10548 # lines 24 columns 80 vb
10550 wy325-vb|wyse325-vb|wyse-325 with visual bell,
10554 # lines 24 columns 132
10556 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
10557 cols#132, lw#7, nlab#16, wsl#97,
10558 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
10559 rs2=\E`;$<70>, use=wy325,
10561 # lines 25 columns 80
10563 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
10564 lh@, lines#25, lw@, nlab@,
10565 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
10567 # lines 25 columns 132
10569 wy325-25w|wyse325-25w|wy325 132 columns,
10570 lh@, lines#25, lw@, nlab@,
10571 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
10573 # lines 25 columns 132 vb
10575 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
10579 # lines 42 columns 80
10581 wy325-42|wyse325-42|wyse-325 42 lines,
10582 lh@, lines#42, lw@, nlab@,
10583 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
10585 # lines 42 columns 132
10587 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
10588 lh@, lines#42, lw@, nlab@,
10589 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
10591 # lines 42 columns 132 vb
10593 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
10596 # lines 43 columns 80
10598 wy325-43|wyse325-43|wyse-325 43 lines,
10599 lh@, lines#43, lw@, nlab@,
10602 # lines 43 columns 132
10604 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
10605 lh@, lines#43, lw@, nlab@,
10606 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
10608 # lines 43 columns 132 vb
10610 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
10613 # Wyse 370 -- 24 line screen with status line.
10615 # The terminal may have to be set for 8 data bits and 2 stop
10616 # bits for the arrow keys to work.
10618 # If you change keyboards the terminal will send different
10619 # escape sequences.
10620 # The following definition is for the basic terminal without
10623 # <u0> -> enter Tektronix 4010/4014 mode
10624 # <u1> -> exit Tektronix 4010/4014 mode
10625 # <u2> -> enter ASCII mode (from any ANSI mode)
10626 # <u3> -> exit ASCII mode (goto native ANSI mode)
10627 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
10628 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
10630 # Bug: The <op> capability resets attributes.
10631 wy370-nk|wyse 370 without function keys,
10632 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
10633 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
10634 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10635 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10636 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
10637 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10638 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10639 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10640 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
10641 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
10642 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
10643 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
10644 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
10645 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
10646 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
10648 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
10649 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
10650 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
10651 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
10653 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
10654 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
10655 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
10656 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
10657 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
10658 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
10659 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10660 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
10661 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
10662 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
10663 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
10664 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
10666 # Function key set for the ASCII (wy-50 compatible) keyboard
10667 # This is the default 370.
10669 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
10670 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10671 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
10672 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
10673 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
10674 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
10675 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
10676 knp=\E[U, kpp=\E[V, use=wy370-nk,
10678 # Function key set for the VT-320 (and wy85) compatible keyboard
10680 wy370-105k|Wyse 370 with 105 key keyboard,
10681 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10682 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
10683 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
10684 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
10685 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
10686 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
10687 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
10688 use=wy370-nk, use=vt220+keypad,
10690 # Function key set for the PC compatible keyboard
10692 wy370-EPC|Wyse 370 with 102 key keyboard,
10693 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
10694 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
10695 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10696 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
10697 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
10699 # Wyse 370 with visual bell.
10700 wy370-vb|Wyse 370 with visible bell,
10703 # Wyse 370 in 132-column mode.
10704 wy370-w|Wyse 370 in 132-column mode,
10706 rs2=\E[35h\E[?3h$<70>, use=wy370,
10708 # Wyse 370 in 132-column mode with visual bell.
10709 wy370-wvb|Wyse 370 with visible bell 132-columns,
10710 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
10711 wy370-rv|Wyse 370 reverse video,
10712 rs3=\E[32h\E[?5h, use=wy370,
10714 # Wyse 99gt Tektronix 4010/4014 emulator,
10716 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
10719 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
10720 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
10722 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
10724 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
10725 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
10727 # Wyse 160 Tektronix 4010/4014 emulator,
10729 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
10730 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
10731 home=^]8`g @\037, use=wy99gt-tek,
10733 # Wyse 370 Tektronix 4010/4014 emulator,
10735 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
10738 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
10739 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
10741 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
10743 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
10744 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
10745 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
10747 # Vendor-supplied Wyse entries end here.
10750 #TITLE: TERMINFO ENTRY WY520
10752 # The WY520 terminfo is based on the WY285 entry published on the WYSE
10753 # BBS with the addition of more function keys and special keys.
10755 # rs1 -> set personality
10756 # rs2 -> set number of columns
10757 # rs3 -> set number of lines
10758 # is1 -> select the proper font
10759 # is2 -> do the initialization
10760 # is3 -> If this string is empty then rs3 gets sent.
10762 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
10763 # - The BS key is programmed to generate BS in smcup since
10764 # is2 doesn't seem to work.
10765 # - Remove and shift/Remove: delete a character
10766 # - Insert : enter insert mode
10767 # - Find : delete to end of file
10768 # - Select : clear a line
10769 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
10771 # - Bottom status line (host writable line) is used.
10772 # - smkx,rmkx are removed because this would put the numeric
10773 # keypad in Dec application mode which doesn't seem to work
10774 # with SCO applications.
10776 wy520|wyse520|wyse 520,
10777 am, hs, km, mc5i, mir, xenl, xon,
10778 cols#80, it#8, lines#24, wsl#80,
10779 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10780 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10781 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
10782 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
10783 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
10784 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10785 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
10786 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
10787 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
10788 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
10789 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
10790 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
10791 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
10792 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10793 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
10794 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
10795 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
10796 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
10797 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
10798 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
10799 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
10800 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
10801 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
10802 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
10803 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
10804 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
10805 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10806 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
10807 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10808 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
10809 vpa=\E[%i%p1%dd, use=vt220+keypad,
10811 # Wyse 520 with 24 data lines and status (terminal status)
10812 wy520-24|wyse520-24|wyse 520 with 24 data lines,
10814 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10817 # Wyse 520 with visual bell.
10818 wy520-vb|wyse520-vb|wyse 520 with visible bell,
10819 flash=\E[30h\E\,\E[30l$<100>, use=wy520,
10821 # Wyse 520 in 132-column mode.
10822 wy520-w|wyse520-w|wyse 520 in 132-column mode,
10824 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
10825 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
10827 # Wyse 520 in 132-column mode with visual bell.
10828 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
10829 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
10832 # Wyse 520 emulating a vt420 7 bit mode.
10833 # The DEL key is programmed to generate BS in is2.
10834 # With EPC keyboard.
10835 # - 'End' key will clear till end of line on EPC keyboard
10836 # - Shift/End : ignored.
10837 # - Insert : enter insert mode.
10838 # - Delete : delete a character (have to change interrupt character
10839 # to CTRL-C: stty intr '^c') for it to work since the
10840 # Delete key sends 7FH.
10841 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
10842 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
10843 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
10846 # Wyse 520 with 24 data lines and status (terminal status)
10847 # with EPC keyboard.
10848 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
10850 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10853 # Wyse 520 with visual bell.
10854 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
10855 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
10857 # Wyse 520 in 132-column mode.
10858 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
10860 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
10861 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
10863 # Wyse 520 in 132-column mode with visual bell.
10864 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
10865 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
10867 # Wyse 520 in 80-column, 36 lines
10868 wy520-36|wyse520-36|wyse 520 with 36 data lines,
10871 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
10874 # Wyse 520 in 80-column, 48 lines
10875 wy520-48|wyse520-48|wyse 520 with 48 data lines,
10878 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
10881 # Wyse 520 in 132-column, 36 lines
10882 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
10885 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
10888 # Wyse 520 in 132-column, 48 lines
10889 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
10892 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
10896 # Wyse 520 in 80-column, 36 lines with EPC keyboard
10897 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
10900 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
10903 # Wyse 520 in 80-column, 48 lines with EPC keyboard
10904 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
10907 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
10910 # Wyse 520 in 132-column, 36 lines with EPC keyboard
10911 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
10914 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
10917 # Wyse 520 in 132-column, 48 lines with EPC keyboard
10918 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
10921 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
10924 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
10925 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
10926 # file and we don't know what <hts> is -- esr)
10927 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
10929 cols#80, it#8, lines#24,
10930 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
10931 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
10932 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
10933 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
10934 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
10935 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
10938 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
10939 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
10940 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
10941 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
10944 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
10945 wy100q|Wyse 100 for Quotron,
10947 cols#80, lines#24, xmc#1,
10948 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
10949 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10950 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
10951 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
10952 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
10954 #### Kermit terminal emulations
10956 # Obsolete Kermit versions may be listed in the section describing obsolete
10957 # non-ANSI terminal emulators later in the file.
10960 # KERMIT standard all versions.
10961 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
10962 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
10963 # From: greg small <gts@populi.berkeley.edu> 9-25-84
10964 kermit|standard kermit,
10967 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
10968 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
10969 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
10970 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
10971 kermit-am|standard kermit plus auto-margin,
10973 is2=K1 Standard Kermit plus Automatic Margins\n,
10975 # IBMPC Kermit 1.2.
10976 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
10977 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
10979 # From: greg small <gts@populi.berkeley.edu> 8-30-84
10980 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
10983 clear=\EH\EJ, ed@, el@,
10984 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
10985 # IBMPC Kermit 1.20
10986 # Cannot use line 25, now acts funny like ansi special scrolling region.
10987 # Initialization must escape from that region by cursor position to line 24.
10988 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
10989 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
10990 # From: greg small <gts@populi.berkeley.edu> 12-19-84
10991 pckermit120|UCB IBMPC Kermit 1.20,
10993 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
10995 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
10996 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
10997 # MS-DOS Kermit 2.27 for the IBMPC
10998 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
10999 # Cannot use line 25, now acts funny like ansi special scrolling region.
11000 # Initialization must escape from that region by cursor position to line 24.
11001 # Does not use am: because autowrap is lost when kermit dropped and restarted.
11002 # Reverse video for standout like H19.
11003 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
11004 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11005 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
11007 cols#80, it#8, lines#24,
11008 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
11009 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
11010 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
11011 home=\EH, ht=^I, il1=\EL,
11012 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
11013 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
11014 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
11015 # MS-DOS Kermit 2.27 with automatic margins
11016 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11017 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
11019 cvvis=\EO\Eq\EG\EvK5,
11020 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
11022 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
11023 # Automatic margins now default. Use ansi <sgr> for highlights.
11024 # Define function keys.
11025 # (msk22714: removed obsolete ":kn#10:" -- esr)
11026 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11027 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
11029 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
11030 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
11031 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
11032 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
11033 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
11034 # This was designed for a VT320 emulator, but it is probably a good start
11035 # at support for the VT320 itself.
11036 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
11037 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
11038 vt320-k3|MS-Kermit 3.00's vt320 emulation,
11039 am, eslok, hs, km, mir, msgr, xenl,
11040 cols#80, it#8, lines#49, pb#9600, vt#3,
11041 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11042 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
11043 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
11044 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11045 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11046 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11047 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11048 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
11049 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
11050 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
11051 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
11052 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
11053 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
11054 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
11055 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
11056 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
11057 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
11058 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
11059 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
11060 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
11061 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11062 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
11063 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
11064 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
11065 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
11066 vt320-k311|dec vt320 series as defined by kermit 3.11,
11067 am, eslok, hs, mir, msgr, xenl, xon,
11068 cols#80, it#8, lines#24, vt#3,
11069 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11070 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
11071 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
11072 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11073 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11074 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11075 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11076 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
11077 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
11078 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
11079 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
11080 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11081 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
11082 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
11083 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
11084 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
11085 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
11086 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
11087 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
11088 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
11090 ######## NON-ANSI TERMINAL EMULATIONS
11095 # These entries attempt to describe Avatar, a terminal emulation used with
11096 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
11097 # capabilities, but with cheaper (shorter) control sequences. Messy design,
11098 # excessively dependent on PC idiosyncracies, but apparently rather popular
11099 # in the BBS world.
11101 # No color support. Avatar doesn't fit either of the Tektronix or HP color
11102 # models that terminfo knows about. An Avatar color attribute is the
11103 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
11105 # I wrote these entries while looking at the Avatar spec. I don't have
11106 # the facilities to test them. Let me know if they work, or don't.
11108 # Avatar escapes not used by these entries (because maybe you're smarter
11109 # and more motivated than I am and can figure out how to wrap terminfo
11110 # around some of them, and because they are weird enough to be funny):
11112 # ^L -- clear window/reset current attribute to default
11113 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
11115 # bit: 6 5 4 3 2 1 0
11117 # +---+---+ | +---+---+
11119 # | | foreground color
11120 # | foreground intensity
11123 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
11124 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
11125 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
11126 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
11127 # (^V^L and ^V^M set the current attribute as a side-effect.)
11128 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
11129 # in the pattern, <c> the number of times the pattern
11130 # should be repeated. If either value is 0, no-op.
11131 # The pattern can contain Avatar console codes,
11132 # including other ^V ^Y patterns.
11134 # ^V^O -- clockwise mode on; turn print direction right each time you
11135 # hit a window edge (yes, really). Turned off by CR
11137 # ^V^Q%c -- query the driver
11138 # ^V^R -- driver reset
11139 # ^V^S -- Sound tone (PC-specific)
11140 # ^V^T -- change highlight at current cursor poition to %c
11141 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
11142 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
11145 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11146 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
11147 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
11148 # which is the only method that will actually work for multiple highlights.)
11150 # Update by TD - 2004: half of this was inconsistent. Found documentation
11151 # and repaired most of the damage. sgr0 is probably incorrect, but the
11152 # available documentation gives no clues for a workable string.
11153 avatar0|avatar terminal emulator level 0,
11155 cols#80, it#8, lines#25,
11156 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
11157 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
11158 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
11160 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
11161 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
11163 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11164 avatar0+|avatar terminal emulator level 0+,
11165 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
11166 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11167 avatar|avatar1|avatar terminal emulator level 1,
11168 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
11169 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
11173 # RBComm is a lean and mean terminal emulator written by the Interrupt List
11174 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
11175 # '90s), especially in the BBS world, and still has some loyal users due to
11176 # its very small memory footprint and to a cute macro language.
11177 rbcomm|IBM PC with RBcomm and EMACS keybindings,
11178 am, bw, mir, msgr, xenl,
11179 cols#80, it#8, lines#25,
11180 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11181 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11182 cub1=^H, cud1=^C, cuf1=^B,
11183 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
11184 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
11185 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
11186 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
11187 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
11188 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
11189 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
11190 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
11191 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
11192 rbcomm-nam|IBM PC with RBcomm without autowrap,
11194 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
11195 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
11196 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
11197 rbcomm-w|IBM PC with RBcomm in 132 column mode,
11199 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
11200 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
11201 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
11203 ######## LCD DISPLAYS
11206 #### Matrix Orbital
11207 # from: Eric Z. Ayers (eric@ale.org)
11209 # Matrix Orbital 20x4 LCD display
11210 # Command Character is 0xFE (decimal 254, octal 376)
11212 # On this device, cursor addressability isn't possible. The LCD expects:
11213 # 0xfe G <col> <row>
11214 # for cup: %p1 == row and %p2 is column
11217 # cup=\376G%p2%c%p1%c
11218 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
11219 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
11221 # Alas, there is no cursor upline capability on this display.
11223 # These entries add some 'sanity stuff' to the clear function. That is, it
11224 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
11225 # and turns off the cursor blinking and stuff like that.
11227 # NOTE: calling 'beep' turns on the backlight (bell)
11228 # NOTE: calling 'flash' turns it on and back off (visual bell)
11230 MtxOrb|Generic Matrix Orbital LCD display,
11231 bel=\376B^A, clear=\376X\376C\376R\376K\376T,
11232 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
11233 flash=\376B\001$<200>\376F, home=\376H,
11234 MtxOrb204|20x4 Matrix Orbital LCD display,
11235 cols#20, lines#4, use=MtxOrb,
11236 MtxOrb162|16x2 Matrix Orbital LCD display,
11237 cols#16, lines#2, use=MtxOrb,
11240 ######## OLDER TERMINAL TYPES
11242 # This section is devoted to older commercial terminal brands that are now
11243 # discontinued, but known to be still in use or represented by emulations.
11246 #### AT&T (att, tty)
11248 # This section also includes Teletype-branded VDTs.
11250 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
11251 # Boundless Technologies); for details, see the header comment on the ADDS
11254 # These are AT&T's official terminfo entries. All-caps aliases have been
11257 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
11258 am, eo, mir, msgr, xon,
11259 cols#80, it#8, lines#24,
11260 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
11261 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11262 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11263 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11264 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
11265 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
11266 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11267 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
11268 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
11269 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
11270 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
11271 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
11272 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
11274 att2350|AT&T 2350 Video Information Terminal 80 column mode,
11275 mc0@, mc4@, mc5@, use=att2300,
11277 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
11278 # Seems upward compatible with vt100, plus ins/del line/char.
11279 # On sgr, the protection parameter is ignored.
11280 # No check is made to make sure that only 3 parameters are output.
11281 # standout= reverse + half-intensity = 3 | 5.
11282 # bold= reverse + underline = 2 | 3.
11283 # note that half-bright blinking doesn't look different from normal blinking.
11284 # NOTE:you must program the function keys first, label second!
11285 # (att4410: a BSD entry has been seen with the following capabilities:
11286 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
11287 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
11288 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
11289 am, hs, mir, msgr, xon,
11290 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11291 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11292 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
11293 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
11294 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
11295 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
11296 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
11297 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
11298 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11299 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
11300 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
11301 ll=\E[24H, nel=^M^J,
11302 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
11303 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
11304 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
11306 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11307 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
11308 tsl=\E7\E[25;%p1%{1}%+%dH,
11310 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
11312 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
11314 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
11316 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
11319 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
11321 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
11323 # 5410 in terms of a vt100
11324 # (v5410: added <rmam>/<smam> based on init string -- esr)
11325 v5410|att5410 in terms of a vt100,
11326 am, mir, msgr, xon,
11327 cols#80, it#8, lines#24, vt#3,
11328 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11329 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
11330 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11331 cub1=^H, cud1=^J, cuf1=\E[C$<2>,
11332 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
11333 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
11334 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
11335 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11336 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
11337 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
11338 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
11340 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
11341 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
11342 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
11346 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
11347 # even! the 5420 has three modes: scroll, window or page mode
11348 # this terminfo should work in scroll or window mode, but doesn't
11349 # take advantage of any of the differences between them.
11351 # Has memory below (2 lines!)
11352 # 3 pages of memory (plus some spare)
11353 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
11354 # <hpa>, <hts> would work for these, but these work in both scroll and window
11355 # mode... Unset insert character so insert mode works
11356 # <is1> sets 80 column mode,
11357 # <is2> escape sequence:
11358 # 1) turn off all fonts
11359 # 2) function keys off, keyboard lock off, control display off,
11360 # insert mode off, erasure mode off,
11361 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
11362 # 4) reset origin mode
11363 # 5) set line wraparound
11364 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
11366 # 8) program ENTER to transmit ^J,
11367 # We use \212 to program the ^J because a bare ^J will get translated by
11368 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
11370 # <is3> set screen color to black,
11371 # No representation in terminfo for the delete word key: kdw1=\Ed
11372 # Key capabilities assume the power-up send sequence...
11373 # This <rmcup> is not strictly necessary, but it helps maximize
11374 # memory usefulness: <rmcup=\Ez>,
11375 # Alternate sgr0: <sgr0=\E[m\EW^O>,
11376 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
11377 # smkx programs the SYS PF keys to send a set sequence.
11378 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
11379 # This string causes them to send the strings <kf1>-<kf8>
11380 # when pressed in SYS PF mode.
11381 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
11382 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
11383 OTbs, db, mir, xon,
11384 lh#2, lm#78, lw#8, nlab#8, wsl#55,
11385 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
11386 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
11387 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
11388 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
11389 flash=\E[?5h$<200>\E[?5l, home=\E[x,
11390 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
11391 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
11392 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
11393 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
11394 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
11395 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
11396 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
11397 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
11398 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
11399 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
11400 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
11401 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
11402 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
11403 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
11404 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
11405 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
11406 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
11407 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
11410 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
11411 cols#132, lm#54, wsl#97,
11412 is1=\E[?3h$<100>, use=att4415,
11414 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
11415 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
11417 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
11418 cols#132, lm#54, wsl#97,
11419 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
11422 # Note that this mode permits programming USER PF KEYS and labels
11423 # However, when you program user pf labels you have to reselect
11424 # user pf keys to make them appear!
11425 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
11426 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
11427 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
11428 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
11430 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
11431 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11434 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
11435 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11438 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
11439 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11442 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
11443 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11446 att5420_2|AT&T 5420 model 2 80 cols,
11447 am, db, hs, mir, msgr, xon,
11448 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
11449 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11450 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
11451 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11452 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
11453 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
11454 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11455 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
11456 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11457 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
11458 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
11459 indn=\E[%p1%dE, invis=\E[8m,
11460 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
11461 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
11462 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
11463 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
11464 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
11465 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
11466 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
11467 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
11468 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
11469 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
11470 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
11471 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
11472 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
11474 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11475 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
11476 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11477 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
11478 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
11480 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
11483 att4418|att5418|AT&T 5418 80 cols,
11486 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11487 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
11488 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
11489 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
11490 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
11491 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
11492 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
11493 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
11494 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
11495 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
11496 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
11497 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
11498 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
11499 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
11500 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
11501 att4418-w|att5418-w|AT&T 5418 132 cols,
11503 is1=\E[?3h, use=att5418,
11505 att4420|tty4420|teletype 4420,
11506 OTbs, da, db, eo, msgr, ul, xon,
11507 cols#80, lines#24, lm#72,
11508 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
11509 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
11510 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
11511 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
11512 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
11513 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
11514 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
11515 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
11517 # The following is a terminfo entry for the Teletype 4424
11518 # asynchronous keyboard-display terminal. It supports
11519 # the vi editor. The terminal must be set up as follows,
11521 # HIGHLIGHT DEFINITION 3-TONE
11522 # DISPLAY FUNCTION GROUP III
11524 # The second entry below provides limited (a la adm3a)
11525 # operation under GROUP II.
11527 # This must be used with DISPLAY FUNCTION GROUP I or III
11528 # and HIGHLIGHT DEFINITION 3-TONE
11529 # The terminal has either bold or blink, depending on options
11531 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
11532 att4424|tty4424|teletype 4424,
11535 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11536 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
11537 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11538 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
11539 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
11540 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
11541 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
11542 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
11543 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11544 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
11545 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
11547 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
11548 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
11551 att4424-1|tty4424-1|teletype 4424 in display function group I,
11552 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
11555 # This entry is not one of AT&T's official ones, it was translated from the
11556 # 4.4BSD termcap file. The highlight strings are different from att4424.
11557 # I have no idea why this is -- older firmware version, maybe?
11558 # The following two lines are the comment originally attached to the entry:
11559 # This entry appears to avoid the top line - I have no idea why.
11560 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
11561 att4424m|tty4424m|teletype 4424M,
11563 cols#80, it#8, lines#23,
11564 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
11565 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
11566 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
11567 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
11568 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
11569 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
11570 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
11572 # The Teletype 5425 is really version 2 of the Teletype 5420. It
11573 # is quite similar, except for some minor differences. No page
11574 # mode, for example, so all of the <cup> sequences used above have
11575 # to change back to what's being used for the 5410. Many of the
11576 # option settings have changed their numbering as well.
11578 # This has been tested on a preliminary model.
11580 # (att5425: added <rmam>/<smam> based on the init string -- esr)
11581 att5425|tty5425|att4425|AT&T 4425/5425,
11582 am, da, db, hs, mir, msgr, xenl, xon,
11583 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
11584 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11585 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11586 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
11587 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11588 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11589 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11590 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11591 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
11592 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
11593 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
11594 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
11595 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
11596 invis=\E[8m, is1=\E<\E[?3l$<100>,
11597 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
11598 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
11599 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11600 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
11601 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
11602 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
11603 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
11605 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
11606 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
11607 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
11608 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
11609 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
11610 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
11611 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11612 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
11613 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
11614 vpa=\E[%p1%{1}%+%dd,
11616 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
11617 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
11619 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
11620 cols#132, lm#54, wsl#97,
11621 is1=\E[?3h$<100>, use=tty5425,
11623 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
11624 # I also added <rmam>/<smam> -- esr)
11625 att4426|tty4426|teletype 4426S,
11627 cols#80, lines#24, lm#48,
11628 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11629 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
11630 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
11631 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11632 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
11633 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
11634 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
11635 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
11636 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
11637 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
11638 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
11639 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
11640 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
11641 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
11642 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
11643 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
11646 # Terminfo entry for the AT&T 510 A Personal Terminal
11647 # Function keys 9 - 16 are available only after the
11648 # screen labeled (soft keys/action blocks) are labeled. Function key
11649 # 9 corresponds to the leftmost touch target on the screen,
11650 # function key 16 corresponds to the rightmost.
11652 # This entry is based on one done by Ernie Rice at Summit, NJ and
11653 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
11654 att510a|bct510a|AT&T 510A Personal Terminal,
11655 am, mir, msgr, xenl, xon,
11656 cols#80, lh#2, lines#24, lw#7, nlab#8,
11657 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
11658 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11659 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
11660 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
11661 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11662 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
11663 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
11664 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
11665 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
11666 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
11667 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
11668 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
11669 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
11670 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
11671 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
11672 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
11673 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
11674 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
11675 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
11676 smul=\E[4m, tbc=\E[3g,
11678 # Terminfo entry for the AT&T 510 D Personal Terminal
11679 # Function keys 9 through 16 are accessed by bringing up the
11681 # Function key 9 corresponds to the leftmost touch target on the screen,
11682 # function key 16 corresponds to the rightmost.
11684 # There are problems with soft key labeling. These are due to
11685 # strangenesses in the native terminal that are impossible to
11686 # describe in a terminfo.
11687 att510d|bct510d|AT&T 510D Personal Terminal,
11688 am, da, db, mir, msgr, xenl, xon,
11689 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
11690 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
11691 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11692 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
11693 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
11694 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
11695 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
11696 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
11697 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
11698 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
11699 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
11700 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
11701 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
11702 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
11703 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
11704 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
11705 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
11706 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
11707 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
11708 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
11709 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
11710 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
11711 rs2=\E[5;0|, sc=\E7,
11712 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11713 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
11714 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
11715 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
11717 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
11718 att500|att513|AT&T 513 using page mode,
11719 am, chts, mir, msgr, xenl, xon,
11720 cols#80, lh#2, lines#24, lw#8, nlab#8,
11721 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
11722 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
11723 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
11724 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11725 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
11726 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11727 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
11728 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11729 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
11730 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
11731 indn=\E[%p1%dE, invis=\E[8m,
11732 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
11733 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
11734 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
11735 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
11736 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
11737 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
11738 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
11739 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
11740 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11741 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
11742 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
11743 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
11744 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
11745 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
11746 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
11747 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
11748 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
11749 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
11751 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
11752 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
11753 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
11754 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
11755 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
11756 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
11757 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
11759 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
11760 rs2=\E[5;0|, sc=\E7,
11761 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11762 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
11763 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
11764 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
11767 # printer must be set to EMUL ANSI to accept ESC codes
11768 # <cuu1> stops at top margin
11769 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
11770 # and alt font ascii,wrap on,tabs cleared
11771 # <is2> disables newline on LF,Emphasized off
11772 # The <u0> capability sets form length
11773 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
11775 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
11776 orhi#100, orl#12, orvi#72,
11777 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
11779 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
11780 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
11781 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
11782 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
11784 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
11785 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
11786 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
11787 u0=\E[%p1%dt, vpa=\E[%p1%dd,
11789 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
11790 # The following SET-UP modes are assumed for normal operation:
11791 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
11792 # Other SET-UP modes may be set for operator convenience or communication
11793 # requirements. This termcap description is for the Resident Terminal Mode.
11794 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
11795 # The BRL entry also said: UNSAFE :ll=\E[70H:
11796 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
11798 cols#88, it#8, lines#70, vt#3,
11799 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
11800 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
11801 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
11802 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
11803 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
11804 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
11805 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
11808 # 5620 terminfo (2.0 or later ROMS with char attributes)
11809 # The following SET-UP modes are assumed for normal operation:
11810 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
11811 # Other SET-UP modes may be set for operator convenience or communication
11812 # requirements. This termcap description is for Resident Terminal Mode. No
11813 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
11814 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
11815 # Be aware that older versions of the dmd have a firmware bug that affects
11816 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
11817 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
11818 # also has <ll>=\E[70H commented out and marked unsafe.
11819 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
11820 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
11821 OTbs, am, msgr, npc, xon,
11822 cols#88, it#8, lines#70,
11823 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
11824 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
11825 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
11826 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
11827 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
11828 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
11829 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
11830 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
11831 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
11832 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
11833 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
11834 lines#24, use=att5620,
11835 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
11836 lines#34, use=att5620,
11837 # 5620 layer running the "S" system's downloaded graphics handler:
11838 att5620-s|tty5620-s|layer|vitty|5620 S layer,
11840 cols#80, it#8, lines#72,
11841 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
11842 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
11843 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
11844 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
11847 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
11849 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
11850 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
11851 att605|AT&T 605 80 column 102key keyboard,
11853 cols#80, lines#24, lw#8, nlab#8, wsl#80,
11854 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11855 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
11856 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
11857 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
11858 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11859 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
11860 il1=\E[L, ind=^J, invis=\E[8m,
11861 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
11862 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
11863 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11864 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
11865 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
11866 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
11867 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
11868 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
11869 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
11870 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
11871 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
11872 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
11873 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
11874 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
11875 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
11876 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
11877 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
11878 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
11879 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
11880 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
11881 tsl=\E7\E[25;%i%p1%dx,
11882 att605-pc|ATT 605 in pc term mode,
11883 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
11884 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
11885 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
11886 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11887 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
11888 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
11889 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
11890 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
11891 xoffc=g, xonc=e, use=att605,
11892 att605-w|AT&T 605-w 132 column 102 key keyboard,
11894 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
11896 # (att610: I added <rmam>/<smam> based on the init string. I also
11897 # added <indn> and <rin> because the BSD file says the att615s have them,
11898 # and the 615 is like a 610 with a big keyboard, and most of their other
11899 # smart terminals support the same sequence -- esr)
11900 att610|AT&T 610; 80 column; 98key keyboard,
11901 am, eslok, hs, mir, msgr, xenl, xon,
11902 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11903 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11904 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11905 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11906 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11907 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11908 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11909 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11910 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11911 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
11912 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
11913 indn=\E[%p1%dS, invis=\E[8m,
11914 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
11915 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
11916 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11917 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11918 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
11919 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
11920 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
11922 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
11923 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
11924 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
11925 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
11926 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11927 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11928 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
11929 att610-w|AT&T 610; 132 column; 98key keyboard,
11931 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11934 att610-103k|AT&T 610; 80 column; 103key keyboard,
11935 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
11936 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
11937 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
11938 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
11939 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
11940 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
11941 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
11942 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
11943 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
11944 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
11945 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
11946 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
11947 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
11948 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
11950 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
11952 att615|AT&T 615; 80 column; 98key keyboard,
11953 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
11954 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
11955 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
11956 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
11957 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
11958 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11959 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
11960 att615-w|AT&T 615; 132 column; 98key keyboard,
11961 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
11962 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
11963 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
11964 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
11965 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
11966 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
11967 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
11968 att615-103k|AT&T 615; 80 column; 103key keyboard,
11969 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
11970 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
11971 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
11972 # (att620: I added <rmam>/<smam> based on the init string and
11973 # <rin>/<indn> from a BSD termcap -- esr)
11974 att620|AT&T 620; 80 column; 98key keyboard,
11975 am, eslok, hs, mir, msgr, xenl, xon,
11976 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11977 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11978 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11979 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
11980 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11981 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
11982 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11983 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11984 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
11985 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
11986 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
11987 indn=\E[%p1%dS, invis=\E[8m,
11988 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
11989 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
11990 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11991 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
11992 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
11993 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
11994 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
11995 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
11996 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
11997 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
11998 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
11999 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
12000 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
12001 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12002 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12003 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12004 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
12005 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
12006 rs2=\Ec\E[?3l, sc=\E7,
12007 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
12008 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
12009 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
12010 tsl=\E7\E[25;%i%p1%dx,
12011 att620-w|AT&T 620; 132 column; 98key keyboard,
12013 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12015 att620-103k|AT&T 620; 80 column; 103key keyboard,
12016 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12017 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12018 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
12019 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
12020 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
12021 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
12022 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
12023 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
12024 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
12025 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
12026 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
12027 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
12028 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
12029 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
12030 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
12031 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
12033 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
12035 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12038 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
12039 # The following SETUP modes are assumed for normal operation:
12040 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
12041 # Font_Size=Large Non-Layers_Window_Cols=80
12042 # Non-Layers_Window_Rows=60
12043 # Other SETUP modes may be set for operator convenience or communication
12044 # requirements. Some capabilities assume a printer attached to the Aux EIA
12045 # port. This termcap description is for the Fixed Non-Layers Window. No
12046 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12047 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
12048 att630|AT&T 630 windowing terminal,
12049 OTbs, am, da, db, mir, msgr, npc, xon,
12050 cols#80, it#8, lines#60, lm#0,
12051 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
12052 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12053 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12054 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
12055 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
12056 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12057 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
12058 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
12059 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
12060 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
12061 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
12062 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
12063 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
12064 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
12065 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
12066 rmul=\E[m, rs2=\Ec, sc=\E7,
12067 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7%;m,
12068 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
12069 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
12070 lines#24, use=att630,
12072 # This is the att700 entry for 700 native emulation of the AT&T 700
12073 # terminal. Comments are relative to changes from the 605V2 entry and
12074 # att730 on which the entry is based. Comments show the terminfo
12075 # capability name, termcap name, and description.
12077 # Here is what's going onm in the init string:
12078 # ESC [ 50;4| set 700 native mode (really is 605)
12079 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
12080 # ESC [ 53;0| set GenFlow to Xon/Xoff
12081 # ESC [ 8 ;0| set CR on NL
12082 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
12083 # ESC [ ? 4 l jump scroll
12084 # ESC [ ? 5 l/h video: normal (l); reverse (h)
12085 # ESC [ ?13 l Labels on
12086 # ESC [ ?15 l parity check = no
12087 # ESC [ 13 l monitor mode off
12088 # ESC [ 20 l LF on NL (not CRLF on NL)
12089 # ESC [ ? 7 h autowrap on
12090 # ESC [ 12 h local echo off
12091 # ESC ( B GO = ASCII
12092 # ESC ) 0 G1 = Special Char & Line Drawing
12093 # ESC [ ? 31 l Set 7 bit controls
12095 # Note: Most terminals, especially the 600 family use Reverse Video for
12096 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
12097 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
12098 # standout mode with \E[m (all normal attributes). The 730 entry simply
12099 # exits reverse video which would leave other current attributes intact. It
12100 # was assumed the 730 entry to be more correct so rmso has changed. The
12101 # 605V2 has no sequences to turn individual attributes off, thus its setting
12102 # and the rmso/smso settings from the 730.
12104 # Note: For the same reason as above in rmso I changed exit under-score mode
12105 # to specifically turn off underscore, rather than return to all normal
12108 # Note: The following pkey_xmit is taken from the 605V2 which contained the
12109 # capability as pfxl. It was changed here to pfx since pfxl
12110 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
12111 # allows strings to be parameters and label values must be programmed as
12112 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
12113 # and strings to be parameters. The 605V2 pfx entry should be examined later
12114 # in this regard. For reference the 730 pfxl entry is shown here for comparison
12116 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
12117 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
12120 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
12123 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
12125 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
12129 # modular 10 pin Connector
12130 # Left side Right side
12131 # Pin 1 2 3 4 5 6 7 8 9 10
12133 # Key (notch) at bottom
12145 # The manual is 189 pages and is loaded with details about the escape codes,
12146 # etc..... Available from AT&T CIC 800-432-6600...
12147 # ask for Document number 999-300-660..
12149 att700|AT&T 700 24x80 column display w/102key keyboard,
12150 am, eslok, hs, mir, msgr, xenl, xon,
12151 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12152 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12153 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12154 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
12155 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12156 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12157 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12158 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12159 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12160 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
12161 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
12162 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
12163 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
12164 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
12165 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12166 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
12167 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
12168 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
12169 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
12170 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
12171 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
12172 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
12173 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
12174 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
12175 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12176 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
12177 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12178 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
12179 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
12180 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
12181 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
12182 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
12183 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12184 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
12185 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
12186 tsl=\E7\E[99;%i%p1%dx,
12188 # This entry was modified 3/13/90 by JWE.
12189 # fixes include additions of <enacs>, correcting <rep>, and modification
12190 # of <kHOM>. (See comments below)
12191 # att730 has status line of 80 chars
12192 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
12193 # the <kf25> and up keys are used for shifted system Fkeys
12194 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
12195 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
12196 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
12197 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
12198 # 102, 102+1, or 122 key keyboards
12200 # (att730: I added <rmam>/<smam> based on the init string -- esr)
12201 att730|AT&T 730 windowing terminal,
12202 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
12203 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
12204 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12205 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12206 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
12207 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12208 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12209 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12210 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12211 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12212 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
12213 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
12214 ind=\ED, invis=\E[8m,
12215 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
12216 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
12217 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12218 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
12219 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
12220 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
12221 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
12222 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
12223 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
12224 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
12225 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
12226 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
12227 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12228 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
12229 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12230 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
12231 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
12232 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
12233 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
12234 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
12235 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
12236 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12237 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12238 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
12239 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
12240 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
12241 lines#41, use=att730,
12242 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
12243 lines#24, use=att730,
12244 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
12245 flash=\E[?5l$<200>\E[?5h,
12246 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
12248 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
12249 lines#41, use=att730r,
12250 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
12251 lines#24, use=att730r,
12253 # The following represents the screen layout along with the associated
12254 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
12255 # not appear on the screen but are shown to reference the bezel buttons.
12256 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
12257 # position relative to the screen.
12261 # +----------------------------------------------------------------+
12263 # XXXX | kf0 kf24 | XXXX
12266 # XXXX | kf1 kf23 | XXXX
12269 # XXXX | kf2 kf22 | XXXX
12272 # XXXX | kf3 kf21 | XXXX
12275 # XXXX | kf4 kf20 | XXXX
12278 # XXXX | kf5 kf19 | XXXX
12281 # XXXX | kf6 kf18 | XXXX
12287 # +----------------------------------------------------------------+
12289 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
12291 # Note: XXXX represents the screen buttons
12297 # The character string sent by key 'kf26' may be user programmable
12298 # to send either \E[16s, or \E[26s.
12299 # The character string sent by key 'krfr' may be user programmable
12300 # to send either \E[17s, or \E[27s.
12302 # Depression of the "CMD" key sends \E! (kcmd)
12303 # Depression of the "MAIL" key sends \E[26s (kf26)
12304 # "REDRAW" same as "REFRESH" (krfr)
12306 # "kf" functions adds carriage return to output string if terminal is in
12309 # The following are functions not covered in the table above:
12311 # Set keyboard character (SKC): \EPn1;Pn2w
12312 # Pn1= 0 Back Space key
12314 # Pn2= Program char (hex)
12316 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
12317 # Pn1= Window number (1-39)
12318 # Pn2-Pn5= Y;X;Y;X coordinates
12320 # Screen Selection (SSL): \E[Pnu
12321 # Pn= Window number
12323 # Set Terminal Modes (SM): \E[Pnh
12324 # Pn= 3 Graphics mode
12325 # Pn= > Cursor blink
12326 # Pn= < Enter new line mode
12327 # Pn= = Enter reverse insert/replace mode
12328 # Pn= ? Enter no scroll mode
12330 # Reset Terminal Mode (RM): \E[Pnl
12331 # Pn= 3 Exit graphics mode
12332 # Pn= > Exit cursor blink
12333 # Pn= < Exit new line mode
12334 # Pn= = Exit reverse insert/replace mode
12335 # Pn= ? Exit no scroll mode
12337 # Screen Status Report (SSR): \E[Pnp
12338 # Pn= 0 Request current window number
12339 # Pn= 1 Request current window dimensions
12341 # Device Status Report (DSR): \E[6n Request cursor position
12343 # Call Status Report (CSR): \E[Pnv
12344 # Pn= 0 Call failed
12345 # Pn= 1 Call successful
12347 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
12348 # Pn1= Button number to be loaded
12349 # Pn2= Character count of "string"
12350 # Pn3= Key mode being loaded:
12354 # String= Text string (15 chars max)
12356 # Screen Number Report (SNR): \E[Pnp
12357 # Pn= Screen number
12359 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
12360 # Pn1= Number of rows available in window
12361 # Pn2= Number of columns available in window
12363 # Cursor Position Report (CPR): \E[Pn1;Pn2R
12364 # Pn1= "Y" Position of cursor
12365 # Pn2= "X" Position of cursor
12367 # Request Answer Back (RAB): \E[c
12369 # Answer Back Response (ABR): \E[?;*;30;VSV
12370 # *= 0 No printer available
12371 # *= 2 Printer available
12372 # V= Software version number
12373 # SV= Software sub version number
12374 # (printer-available field not documented in v1)
12376 # Screen Alignment Aid: \En
12378 # Bell (lower pitch): \E[x
12380 # Dial Phone Number: \EPdstring\
12381 # string= Phone number to be dialed
12383 # Set Phone Labels: \EPpstring\
12384 # string= Label for phone buttons
12386 # Set Clock: \EPchour;minute;second\
12388 # Position Clock: \EPsY;X\
12389 # Y= "Y" coordinate
12390 # X= "X" coordinate
12392 # Delete Clock: \Epr\
12394 # Programming The Function Buttons: \EPfPn;string\
12395 # Pn= Button number (00-06, 18-24)
12396 # (kf00-kf06, kf18-kf24)
12397 # string= Text to sent on button depression
12399 # The following in version 2 only:
12401 # Request For Local Directory Data: \EPp12;\
12403 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
12405 # Request for Local Directory Data in print format: \EPp13;\
12407 # Enable 'Prt on Line' mode: \022 (DC2)
12409 # Disable 'Prt on Line' mode: \024 (DC4)
12413 # The following Terminfo entry describes functions which are supported by
12414 # the AT&T 5430/pt505 terminal software version 2 and later.
12415 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
12417 cols#80, it#8, lines#24,
12418 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12419 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
12420 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
12421 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12422 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12423 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12424 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
12425 il=\E[%p1%dL, il1=\E[L, ind=^J,
12426 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
12427 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12428 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
12429 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
12430 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
12431 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
12432 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
12433 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
12434 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
12435 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
12437 # The following Terminfo entry describes functions which are supported by
12438 # the AT&T 5430/pt505 terminal software version 1.
12439 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
12441 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
12442 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
12443 lines#22, use=att505,
12445 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
12446 # This cut mark helps make life less painful for people running ncurses tic
12447 # on machines with relatively little RAM. The file can be broken in half here
12448 # cleanly and compiled in sections -- no `use' references cross this cut
12452 #### Ampex (Dialogue)
12454 # Yes, these are the same people who are better-known for making audio- and
12455 # videotape. I'm told they are located in Redwood City, CA.
12458 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
12459 # (ampex80: some capabilities merged in from SCO's entry -- esr)
12460 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
12462 cols#80, it#8, lines#24,
12463 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
12464 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12465 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
12466 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
12467 smso=\Ej, smul=\El, tbc=\E3,
12468 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
12469 ampex175|ampex d175,
12472 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
12473 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
12474 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
12475 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
12476 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
12477 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
12478 # No backspace key in the main QWERTY cluster. Fortunately, it has a
12479 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
12480 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
12481 # mode), this key can be used as the erase key; I find I like this. Because
12482 # some people and some systems may not, there is another termcap ("ampex175")
12483 # that suppresses this little eccentricity by omitting the relevant capability.
12484 ampex175-b|ampex d175 using left arrow for erase,
12485 kbs=^_, use=ampex175,
12486 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
12487 # (ampex210: removed obsolete ":kn#10:" -- esr)
12488 ampex210|a210|ampex a210,
12489 OTbs, am, hs, xenl,
12490 cols#80, it#8, lines#24, xmc#1,
12491 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
12492 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
12493 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
12494 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
12495 if=/usr/share/tabset/std, il1=\EE, invis@,
12496 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
12497 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
12498 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
12499 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
12500 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
12501 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
12502 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
12503 # and moved the padding to be *after* the caps -- esr)
12504 ampex219|ampex-219|amp219|Ampex with Automargins,
12506 cols#80, it#8, lines#24,
12507 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
12508 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
12509 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
12510 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
12511 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
12512 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
12513 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
12514 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
12515 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
12516 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
12517 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
12518 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
12519 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
12520 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
12521 cols#132, lines#24,
12522 bel=^G, cr=^M, cud1=^J, ind=^J,
12523 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
12524 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
12525 ampex232|ampex-232|Ampex Model 232,
12527 cols#80, lines#24, xmc#1,
12528 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
12529 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12530 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
12531 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
12532 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
12533 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
12534 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
12535 kf9=^AI\r, khome=^^, use=adm+sgr,
12536 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
12537 ampex232w|Ampex Model 232 / 132 columns,
12538 cols#132, lines#24,
12539 is2=\E\034Eg\El, use=ampex232,
12541 #### Ann Arbor (aa)
12543 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
12544 # numbers of function keys. At least some used monitors in portrait mode,
12545 # allowing up to 76-character screen heights! They were reachable at:
12547 # Ann Arbor Terminals
12548 # 6175 Jackson Road
12549 # Ann Arbor, MI 48103
12552 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
12553 # can't be found on the Web; I fear they're long dead. R.I.P.
12557 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
12558 # Highly modified 6/22 by Mike O'Brien.
12559 # split out into several for the various screen sizes by dave-yost@rand
12560 # Modifications made 3/82 by Mark Horton
12561 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
12562 # status line moved to top of screen, <flash> removed 5/82
12563 # Some unknown person at SCO then hacked the init strings to make them more
12566 # assumes the following setup:
12567 # A menu: 0000 1010 0001 0000
12568 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
12569 # C menu: 56 66 0 0 9600 0110 1100
12570 # D menu: 0110 1001 1 0
12572 # Briefly, the settings are for the following modes:
12573 # (values are for bit set/clear with * indicating our preference
12574 # and the value used to test these termcaps)
12575 # Note that many of these settings are irrelevent to the terminfo
12576 # and are just set to the default mode of the terminal as shipped
12579 # A menu: 0000 1010 0001 0000
12580 # Block/underline cursor*
12581 # blinking/nonblinking cursor*
12582 # key click/no key click*
12583 # bell/no bell at column 72*
12585 # key pad is cursor control*/key pad is numeric
12586 # return and line feed/return for <cr> key *
12587 # repeat after .5 sec*/no repeat
12588 # repeat at 25/15 chars per sec. *
12590 # hold data until pause pressed/process data unless pause pressed*
12591 # slow scroll/no slow scroll*
12592 # Hold in area/don't hold in area*
12593 # functions keys have default*/function keys disabled on powerup
12595 # show/don't show position of cursor during page transmit*
12600 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
12601 # Baud rate (9600*)
12603 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
12604 # 1 stop bit*/2 stop bits
12605 # parity error detection off*/on
12607 # keyboard local/on line*
12608 # half/full duplex*
12609 # disable/do not disable keyboard after data transmission*
12611 # transmit entire page/stop transmission at cursor*
12612 # transfer/do not transfer protected characters*
12613 # transmit all characters/transmit only selected characters*
12614 # transmit all selected areas/transmit only 1 selected area*
12616 # transmit/do not transmit line separators to host*
12617 # transmit/do not transmit page tab stops tabs to host*
12618 # transmit/do not transmit column tab stop tabs to host*
12619 # transmit/do not transmit graphics control (underline,inverse..)*
12621 # enable*/disable auto XON/XOFF control
12622 # require/do not require receipt of a DC1 from host after each LF*
12623 # pause key acts as a meta key/pause key is pause*
12631 # XON character (17*)
12632 # XOFF character (19*)
12634 # C menu: 56 66 0 0 9600 0110 1100
12635 # number of lines to print data on (printer) (56*)
12637 # number of lines on a sheet of paper (printer) (66*)
12639 # left margin (printer) (0*)
12641 # number of pad chars on new line to printer (0*)
12643 # printer baud rate (9600*)
12645 # printer parity: 00=odd,01=even*,10=space,11=mark
12646 # printer stop bits: 2*/1
12647 # print/do not print guarded areas*
12649 # new line is: 01=LF,10=CR,11=CRLF*
12653 # D menu: 0110 1001 1 0
12654 # LF is newline/LF is down one line, same column*
12655 # wrap to preceding line if move left from col 1*/don't wrap
12656 # wrap to next line if move right from col 80*/don't wrap
12657 # backspace is/is not destructive*
12659 # display*/ignore DEL character
12660 # display will not/will scroll*
12661 # page/column tab stops*
12662 # erase everything*/erase unprotected only
12664 # editing extent: 0=display,1=line*,2=field,3=area
12669 annarbor4080|aa4080|ann arbor 4080,
12672 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
12673 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
12674 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
12675 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
12677 # Strange Ann Arbor terminal from BRL
12678 aas1901|Ann Arbor K4080 w/S1901 mod,
12681 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
12682 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
12685 # If you're using the GNU termcap library, add
12686 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
12687 # to these capabilities. This is the nonstandard GNU termcap scrolling
12688 # capability, arguments are:
12689 # 1. Total number of lines on the screen.
12690 # 2. Number of lines above desired scroll region.
12691 # 3. Number of lines below (outside of) desired scroll region.
12692 # 4. Total number of lines on the screen, the same as the first parameter.
12693 # The generic Ann Arbor entry is the only one that uses this.
12694 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
12695 OTbs, am, km, mc5i, mir, xon,
12697 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
12698 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
12699 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
12700 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12701 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12702 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
12703 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
12704 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
12705 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
12706 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12707 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
12708 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
12709 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
12710 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
12711 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
12712 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
12713 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
12714 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
12715 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
12716 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
12717 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
12719 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
12720 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12721 vpa=\E[%p1%{1}%+%dd,
12723 aaa+rv|ann arbor ambassador in reverse video,
12724 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
12725 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
12726 rs1=\E[H\E[7m\E[J$<156>,
12727 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;%;%?%p7%t8;%;m\016,
12728 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
12729 # Ambassador with the DEC option, for partial vt100 compatibility.
12730 aaa+dec|ann arbor ambassador in dec vt100 mode,
12731 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
12732 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
12733 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
12735 aaa-18|ann arbor ambassador/18 lines,
12737 is2=\E7\E[60;0;0;18p\E8,
12738 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
12740 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
12741 use=aaa+rv, use=aaa-18,
12742 aaa-20|ann arbor ambassador/20 lines,
12744 is2=\E7\E[60;0;0;20p\E8,
12745 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
12747 aaa-22|ann arbor ambassador/22 lines,
12749 is2=\E7\E[60;0;0;22p\E8,
12750 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
12752 aaa-24|ann arbor ambassador/24 lines,
12754 is2=\E7\E[60;0;0;24p\E8,
12755 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
12757 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
12758 use=aaa+rv, use=aaa-24,
12759 aaa-26|ann arbor ambassador/26 lines,
12761 is2=\E7\E[60;0;0;26p\E8,
12762 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
12763 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
12764 aaa-28|ann arbor ambassador/28 lines,
12766 is2=\E7\E[60;0;0;28p\E8,
12767 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
12768 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
12769 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
12772 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
12773 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
12774 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
12775 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
12776 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
12777 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
12778 use=aaa+rv, use=aaa-30-s,
12779 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
12780 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
12781 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
12782 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
12783 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
12784 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
12785 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
12787 is2=\E7\E[60;0;0;30p\E8,
12788 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
12789 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
12790 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
12791 use=aaa+rv, use=aaa-30,
12792 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
12793 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
12795 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
12796 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
12797 use=aaa+rv, use=aaa-30,
12798 aaa-36|ann arbor ambassador/36 lines,
12800 is2=\E7\E[60;0;0;36p\E8,
12801 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
12802 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
12803 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
12804 use=aaa+rv, use=aaa-36,
12805 aaa-40|ann arbor ambassador/40 lines,
12807 is2=\E7\E[60;0;0;40p\E8,
12808 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
12809 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
12810 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
12811 use=aaa+rv, use=aaa-40,
12812 aaa-48|ann arbor ambassador/48 lines,
12814 is2=\E7\E[60;0;0;48p\E8,
12815 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
12816 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
12817 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
12818 use=aaa+rv, use=aaa-48,
12819 aaa-60-s|ann arbor ambassador/59 lines+status,
12822 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
12823 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
12824 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
12825 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
12826 use=aaa+rv, use=aaa-60-s,
12827 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
12828 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
12829 aaa-60|ann arbor ambassador/60 lines,
12831 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
12833 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
12834 use=aaa+rv, use=aaa-60,
12835 aaa-db|ann arbor ambassador 30/destructive backspace,
12837 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
12839 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
12841 flash=\E[>59h$<100>\E[>59l,
12842 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
12843 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
12844 guru+rv|guru changes for reverse video,
12845 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
12846 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
12847 use=guru+rv, use=guru-33,
12848 guru+s|guru status line,
12850 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
12851 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
12852 tsl=\E[>51h\E[1;%p1%dH\E[2K,
12853 guru-nctxt|guru with no saved context,
12854 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
12855 guru-s|guru-33-s|ann arbor guru/33 lines+status,
12857 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
12858 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12859 guru-24|ann arbor guru 24 lines,
12861 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
12863 guru-44|ann arbor guru 44 lines,
12865 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
12867 guru-44-s|ann arbor guru/44 lines+status,
12869 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
12870 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12871 guru-76|guru with 76 lines by 89 cols,
12873 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
12875 guru-76-s|ann arbor guru/76 lines+status,
12877 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
12878 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12879 guru-76-lp|guru-lp|guru with page bigger than line printer,
12880 cols#134, lines#76,
12881 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
12883 guru-76-w|guru 76 lines by 178 cols,
12884 cols#178, lines#76,
12885 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
12887 guru-76-w-s|ann arbor guru/76 lines+status+wide,
12888 cols#178, lines#75,
12889 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
12890 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
12891 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
12892 cols#178, lines#76,
12893 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
12895 aaa-rv-unk|ann arbor unknown type,
12896 lh#0, lw#0, nlab#0,
12897 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
12898 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
12900 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t7;%;%?%p7%t8;%;m,
12901 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
12903 #### Applied Digital Data Systems (adds)
12905 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
12906 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
12907 # terminals was merged again. Then AT&T sold the terminal business to
12908 # SunRiver, which later changed its name to Boundless Technologies. The
12909 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
12910 # as of early 1995) are at:
12912 # Boundless Technologies
12913 # 100 Marcus Boulevard
12914 # Hauppauge, NY 11788-3762
12915 # Vox: (800)-231-5445
12916 # Fax: (516)-342-7378
12917 # Web: http://boundless.com
12919 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
12920 # In 1995 Boundless acquired DEC's terminals business.
12923 # Regent: lowest common denominator, works on all regents.
12924 # (regent: renamed ":bc:" to ":le:" -- esr)
12925 regent|Adds Regent Series,
12928 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
12929 home=\EY\s\s, ind=^J, ll=^A,
12930 # Regent 100 has a bug where if computer sends escape when user is holding
12931 # down shift key it gets confused, so we avoid escape.
12932 regent100|Adds Regent 100,
12935 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
12936 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
12937 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
12938 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
12939 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
12940 regent20|Adds Regent 20,
12941 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
12943 regent25|Adds Regent 25,
12944 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
12946 regent40|Adds Regent 40,
12948 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
12949 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
12950 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
12951 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
12952 smul=\E0`, use=regent25,
12953 regent40+|Adds Regent 40+,
12954 is2=\EB, use=regent40,
12955 regent60|regent200|Adds Regent 60,
12956 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
12957 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
12959 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
12960 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
12961 viewpoint|addsviewpoint|adds viewpoint,
12964 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
12965 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
12966 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
12967 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
12968 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
12969 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
12970 # Some viewpoints have bad ROMs that foo up on ^O
12971 screwpoint|adds viewpoint with ^O bug,
12972 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
12974 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
12975 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
12976 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
12977 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
12978 # invis=01000100 and %c is the logical or of desired attributes.
12979 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
12981 # Update by TD - 2004:
12983 # http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
12985 # COMMANDS ASCII CODE
12987 # Address, Absolute ESC,=,row,column
12989 # Aux Port Enable ESC,@
12990 # Aux Port Disable ESC,A
12994 # Cursor forward FF
12997 # Cursor supress ETB
12998 # Cursor enable CAN
12999 # Erase to end of line ESC,T
13000 # Erase to end of page ESC,Y
13003 # Keyboard unlock SO
13004 # Read current cursor position ESC,?
13005 # Set Attribute ESC,0,x (see below for values of x)
13006 # Tag bit reset ESC,(
13007 # Tag bit set ESC,)
13008 # Transparent Print on ESC,3
13009 # Transparent Print off ESC,4
13015 # Half Intensity A 0101
13017 # Half Intensity Blinking C 0103
13018 # Reverse Video P 0120
13019 # Reverse Video Half Intensity Q 0121
13020 # Reverse Video Blinking R 0122
13021 # Reverse Video Half Intensity
13023 # Underlined ` 0140
13024 # Underlined Half Intensity a 0141
13025 # Underlined Blinking b 0142
13026 # Underlined Half Intensity
13028 # Video suppress D 0104
13029 vp3a+|viewpoint3a+|adds viewpoint 3a+,
13031 cols#80, it#8, lines#24,
13032 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
13033 cub1=^H, cud1=^J, cuf1=^L,
13034 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
13035 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
13036 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
13037 nel=^M^J, rev=\E0P\E), rmso=\E(,
13038 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
13039 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
13040 vp60|viewpoint60|addsvp60|adds viewpoint60,
13043 # adds viewpoint 90 - from cornell
13044 # Note: emacs sends ei occasionally to insure the terminal is out of
13045 # insert mode. This unfortunately puts the viewpoint90 IN insert
13046 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
13047 # - :ei=:im=: must be present in the termcap translation.)
13048 # - <xhp> indicates glitch that attributes stick to location
13049 # - <msgr> means it's safe to move in standout mode
13050 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
13052 # Function key and label capabilities merged in from SCO.
13053 vp90|viewpoint90|adds viewpoint 90,
13054 OTbs, bw, msgr, xhp,
13056 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
13057 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
13058 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
13059 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
13060 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
13061 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
13062 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
13063 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
13064 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
13065 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
13066 # Note: if return acts weird on a980, check internal switch #2
13067 # on the top chip on the CONTROL pc board.
13068 adds980|a980|adds consul 980,
13071 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
13072 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
13073 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
13074 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
13075 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
13077 #### C. Itoh Electronics
13079 # As of 1995 these people no longer make terminals (they're still in the
13080 # printer business). Their terminals were all clones of the DEC VT series.
13081 # They're located in Orange County, CA.
13084 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
13085 # the delay times and do an auto tab set rather than the indirect
13086 # file used in vt100.
13087 cit80|cit-80|citoh 80,
13090 clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
13091 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
13092 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
13093 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
13094 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
13095 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
13096 cit101|citc|C.itoh fast vt100,
13099 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
13100 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
13101 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
13102 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
13103 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
13104 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13105 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
13106 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
13108 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
13109 # The following termcap entry was created from the Callan cd100 entry. The
13110 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
13111 # full selection of combinations of reverse video, underline, and blink.
13112 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
13113 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
13114 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
13115 cit101e|C. Itoh CIT-101e,
13116 OTbs, OTpt, am, mir, msgr,
13117 cols#80, it#8, lines#24,
13118 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
13119 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
13120 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
13121 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
13122 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
13123 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
13124 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
13125 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
13126 smkx=\E=, smso=\E[7m, smul=\E[4m,
13127 # From: David S. Lawyer, June 1997:
13128 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
13129 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
13130 # late 1980's CIT Terminals went out of business.
13131 # There is no need to use the initialization string is=... (by invoking
13132 # tset or setterm etc.) provided that the terminal has been manually set
13133 # up (and the setup saved with ^S) to be compatible with this termcap. To be
13134 # compatible it should be in ANSI mode (not VT52). A set-up that
13135 # works is to set all the manually setable stuff to factory defaults
13136 # by pressing ^D in set-up mode. Then increse the brighness with the
13137 # up-arrow key since the factory default will likely be dim on an old
13138 # terminal. Then change any options you want (provided that they are
13139 # compatible with the termcap). For my terminal I set: Screen
13140 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
13141 # on. I also set up mine for parity (but you may not need it). Then
13142 # save the setup with ^S.
13143 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
13144 cit101e-rv|Citoh CIT-101e (sets reverse video),
13145 am, eo, mir, msgr, xenl, xon,
13146 cols#80, it#8, lines#24,
13147 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13148 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
13149 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13150 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13151 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13152 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13153 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
13154 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
13155 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
13156 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
13157 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13158 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
13159 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
13160 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
13161 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
13162 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
13163 u7=\E[6n, u8=\E[?6c, u9=\E[c,
13164 cit101e-n|CIT-101e w/o am,
13166 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
13168 cit101e-132|CIT-101e with 132 cols,
13170 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
13171 cit101e-n132|CIT-101e with 132 cols w/o am,
13174 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
13176 # CIE Terminals CIT-500 from BRL
13177 # The following SET-UP modes are assumed for normal operation:
13178 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
13179 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
13180 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
13181 # Other SET-UP modes may be set for operator convenience or communication
13183 # Hardware tabs are assumed to be set every 8 columns; they can be set up
13184 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
13185 # "stty ixon -ixany" to enable DC3/DC1 flow control!
13186 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
13187 cit500|CIE Terminals CIT-500,
13188 OTbs, OTpt, mir, msgr, xon,
13189 OTkn#10, cols#80, it#8, lines#64, vt#3,
13190 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13191 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13192 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13193 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13194 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13195 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
13196 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
13197 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
13198 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
13199 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
13200 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
13201 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
13202 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
13203 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
13204 rmso=\E[m, rmul=\E[m,
13205 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
13206 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
13207 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13209 # C. Itoh printers begin here
13210 citoh|ci8510|8510|c.itoh 8510a,
13213 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
13214 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
13216 citoh-pica|citoh in pica,
13217 is1=\EN, use=citoh,
13218 citoh-elite|citoh in elite,
13221 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
13223 citoh-comp|citoh in compressed,
13226 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
13228 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
13229 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
13231 is1=\EP, use=citoh,
13232 citoh-6lpi|citoh in 6 lines per inch mode,
13233 is3=\EA, use=citoh,
13234 citoh-8lpi|citoh in 8 lines per inch mode,
13236 is3=\EB, use=citoh,
13238 #### Control Data (cdc)
13241 cdc456|cdc 456 terminal,
13244 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13245 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
13246 el=^V, home=^Y, il1=\EL, ind=^J,
13248 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
13252 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13253 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
13254 kcuu1=^W, khome=^Y,
13255 cdc721ll|CDC Vikingll,
13257 cols#132, lines#24,
13258 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13259 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
13260 kcuu1=^W, khome=^Y,
13261 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
13265 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13266 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
13267 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
13269 # The following switch/key settings are assumed for normal operation:
13270 # 96 chars SCROLL FULL duplex not BLOCK
13271 # Other switches may be set according to communication requirements.
13272 # Insert/delete-character cannot be used, as the whole display is affected.
13273 # "so" & "se" are commented out until jove handles "sg" correctly.
13276 OTkn#10, cols#80, lines#24,
13277 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13278 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
13279 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
13280 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
13281 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
13282 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
13283 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
13284 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
13285 rs1=\031\030\002\003\017,
13287 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
13289 # Part of the long initialization string defines the "DOWN" key to the left
13290 # of the tab key to send an ESC. The real ESC key is positioned way out
13293 # The termcap won't work in 132 column mode due to the way it it moves the
13294 # cursor. Termcap doesn't have the capability (as far as I could tell) to
13295 # handle the 721 in 132 column mode.
13297 # (cdc721: changed :ri: to :sr: -- esr)
13298 cdc721-esc|Control Data 721,
13299 OTbs, OTpt, am, bw, msgr, xon,
13300 OTkn#10, cols#80, it#8, lines#30,
13301 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
13302 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
13303 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
13304 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
13305 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
13306 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
13307 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
13308 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
13309 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
13310 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
13311 smso=^^D, smul=^\, tbc=^^^RY,
13315 # Getronics is a Dutch electronics company that at one time was called
13316 # `Geveke' and made async terminals; but (according to the company itself!)
13317 # they've lost all their documentation on the command set. The hardware
13318 # documentation suggests the terminals were actually manufactured by a
13319 # Taiwanese electronics company named Cal-Comp. There are known
13320 # to have been at least two models, the 33 and the 50.
13323 # The 50 seems to be a top end vt220 clone, with the addition of a higher
13324 # screen resolution, a larger screen, at least 1 page of memory above and
13325 # below the screen, apparently pages of memory right and left of the screen
13326 # which can be panned, and about 75 function keys (15 function keys x normal,
13327 # shift, control, func A, func B). It also has more setup possibilities than
13328 # the vt220. The monitor case is dated November 1978 and the keyboard case is
13331 # The vt100 emulation works as is. The entry below describes the rather
13332 # non-conformant (but more featureful) ANSI mode.
13334 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
13335 visa50|geveke visa 50 terminal in ansi 80 character mode,
13338 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
13339 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
13340 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
13341 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13342 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13343 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
13344 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
13345 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
13346 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
13347 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
13348 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
13349 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
13350 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
13351 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
13352 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
13353 lf3=A insert line, lf4=A delete line, lf5=A clear,
13354 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
13355 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
13356 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
13357 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
13358 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
13361 #### Human Designed Systems (Concept)
13363 # Human Designed Systems
13365 # King of Prussia, PA 19406
13366 # Vox: (610)-277-8300
13367 # Fax: (610)-275-5739
13368 # Net: support@hds.com
13370 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
13371 # the character-terminal business now (1995) and making X terminals. In
13372 # particular, the whole `Concept' line described here was discontinued long
13376 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
13377 # Extensive changes to c108 by arpavax:eric Feb 1982
13378 # Some unknown person at SCO then translated it to terminfo.
13380 # There seem to be a number of different versions of the C108 PROMS
13381 # (with bug fixes in its Z-80 program).
13383 # The first one that we had would lock out the keyboard of you
13384 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
13385 # Try that on your C108 and see if it sends a ^S when you type it.
13386 # If so, you have an old version of the PROMs.
13388 # You should configure the C108 to send ^S/^Q before running this.
13389 # It is much faster (at 9600 baud) than the c100 because the delays
13391 # new status line display entries for c108-8p:
13392 # <is3> - init str #3 - setup term for status display -
13393 # set programmer mode, select window 2, define window at last
13394 # line of memory, set bkgnd stat mesg there, select window 0.
13396 # <tsl> - to status line - select window 2, home cursor, erase to
13397 # end-of-window, 1/2 bright on, goto(line#0, col#?)
13399 # <fsl> - from status line - 1/2 bright off, select window 0
13401 # <dsl> - disable status display - set bkgnd status mesg with
13404 # There are probably more function keys that should be added but
13405 # I don't know what they are.
13407 # No delays needed on c108 because of ^S/^Q handshaking
13409 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
13410 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
13411 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
13412 c108-4p|concept108-4p|concept 108 w/4 pages,
13413 OTbs, eslok, hs, xon,
13415 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
13416 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
13417 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
13418 ind=^J, is1=\EK\E!\E F,
13419 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
13420 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
13421 smcup=\EU\Ev 8p\Ep\r\E\025,
13422 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
13423 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
13424 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
13426 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
13427 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
13429 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
13431 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
13432 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
13435 # These have only window relative cursor addressing, not screen
13436 # relative. To get it to work right here, smcup/rmcup (which
13437 # were invented for the concept) lock you into a one page
13438 # window for screen style programs.
13440 # To get out of the one page window, we use a clever trick:
13441 # we set the window size to zero ("\Ev " in rmcup) which the
13442 # terminal recognizes as an error and resets the window to all
13445 # This trick works on c100 but does not on c108, sigh.
13447 # Some tty drivers use cr3 for concept, others use nl3, hence
13448 # the delays on cr and ind below. This padding is only needed at
13449 # 9600 baud and up. One or the other is commented out depending on
13450 # local conventions.
13452 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
13453 # less than 6 but more than 2 will work.
13455 # Note: can't use function keys f7-f10 because they are
13456 # indistinguishable from arrow keys (!), also, del char and
13457 # clear eol use xon/xoff so they probably won't work very well.
13459 # Also note that we don't define insrt/del char/delline/eop/send
13460 # because they don't transmit unless we reset them - I figured
13461 # it was a bad idea to clobber their definitions.
13463 # The <mc5> sequence changes the escape character to ^^ so that
13464 # escapes will be passed through to the printer. Only trouble
13465 # is that ^^ won't be - ^^ was chosen to be unlikely.
13466 # Unfortunately, if you're sending raster bits through to be
13467 # plotted, any character you choose will be likely, so we lose.
13469 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
13470 # cannot be # in is2 because it will hang a c100 with no printer
13472 c100|concept100|concept|c104|c100-4p|hds concept 100,
13473 OTbs, am, eo, mir, ul, xenl,
13474 cols#80, lines#24, pb#9600, vt#8,
13475 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
13476 cub1=^H, cud1=^J, cuf1=\E=,
13477 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
13478 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
13479 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
13480 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
13482 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
13483 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
13484 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
13485 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
13486 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
13487 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
13488 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
13489 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
13490 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
13491 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
13492 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
13493 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
13494 smso=\ED, smul=\EG,
13495 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
13496 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
13497 smso=\EE, use=c100,
13498 oc100|oconcept|c100-1p|old 1 page concept 100,
13502 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
13503 # Lots of notes, originally inline, but ncurses doesn't grok that.
13505 # am: not available in power on mode, but turned on with \E[=107;207h in
13506 # is2=. Also, \E=124l in is2= could have been used to prevent needing
13507 # to specify xenl:, but that would have rendered the last space on the
13508 # last line useless.
13509 # bw: Not available in power on mode, but turned on with \E[=107;207h in
13511 # clear: Could be done with \E[2J alone, except that vi (and probably most
13512 # other programs) assume that this also homes the cursor.
13513 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
13514 # scroll the window, and go back to window 1.
13515 # is2: the string may cause a warning to be issued by tic that it
13516 # found a very long line and that it suspects that a comma is missing
13517 # somewhere. This warning can be ignored (unless it comes up more than
13518 # once). The initialization string contains the following commands:
13520 # [Setup mode items changed from factory defaults:]
13521 # \E)0 set alternate character set to
13523 # ^O set character set to default
13524 # [In case it wasn't]
13525 # \E[m turn off all attributes
13526 # [In case they weren't off]
13527 # \E[=107; cursor wrap and
13528 # 207h character wrap on
13529 # \E[90;3u set Fkey definitions to "transmit"
13531 # \E[92;3u set cursor key definitions to
13532 # "transmit" defaults
13533 # \E[43;1u set shift F13 to transmit...
13535 # \E[44;1u set shift F14 to transmit...
13537 # \E[45;1u set shift F15 to transmit...
13539 # \E[46;1u set shift F16 to transmit...
13541 # \E[200;1u set shift up to transmit...
13543 # \E[201;1u set shift down to transmit...
13545 # \E[202;1u set shift right to transmit...
13547 # \E[203;1u set shift left to transmit...
13549 # \E[204;1u set shift home to transmit...
13551 # \E[212;1u set backtab to transmit...
13553 # \E[213;1u set shift backspace to transmit...
13555 # \E[214;1u set shift del to transmit...
13557 # [Necessary items not mentioned in setup mode:]
13558 # \E[2!w move to window 2
13559 # \E[25;25w define window as line 25 of memory
13560 # \E[!w move to window 1
13561 # \E[2*w show current line of window 2 as
13563 # \E[2+x set meta key to use high bit
13564 # \E[;3+} move underline to bottom of character
13566 # All Fkeys are set to their default transmit definitions with \E[90;3u
13567 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
13568 # setting MUST be redefined or deactivated, because the default is
13569 # contained in almost all of this terminal's Fkey strings! If for some
13570 # reason "quit" cannot be altered, the Fkeys can, but it would be
13571 # necessary to change ^| to ^] in all of these definitions, and add
13572 # \E[2;029!t to is2.
13573 # lines: is set to 24 because this terminal refuses to treat the 25th
13575 # ll: Not available in power on mode, but turned on with \E[=107;207h in
13577 # lm: Pointless, given that this definition locks a single screen of
13578 # memory into view, but what the hey...
13579 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
13580 # other attributes alone), but some programs expect this to turn off
13582 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
13583 # attributes alone), but some programs expect this to turn off
13585 # sgr: Attributes are set on this terminal with the string \E[ followed by
13586 # a list of attribute code numbers (in decimal, separated by
13587 # semicolons), followed by the character m. The attribute code
13590 # 2 for dim (which is ignored in power on mode);
13594 # 8 for not displayable; and
13595 # =99 for protected (except that there are strange side
13596 # effects to protected characters which make them inadvisable).
13597 # The mapping of terminfo parameters to attributes is as follows:
13598 # %p1 (standout) = bold and inverse together;
13599 # %p2 (underline) = underline;
13600 # %p3 (reverse) = inverse;
13601 # %p4 (blink) = blinking;
13602 # %p5 (dim) is ignored;
13603 # %p6 (bold) = bold;
13604 # %p7 (invisible) = not displayable;
13605 # %p8 (protected) is ignored; and
13606 # %p9 (alt char set) = alt char set.
13607 # The code to do this is:
13609 # %?%p1%p6%O IF (standout; bold) OR
13610 # %t;1 THEN OUTPUT ;1
13612 # %?%p2 IF underline
13613 # %t;4 THEN OUTPUT ;4
13616 # %t;5 THEN OUTPUT ;5
13618 # %?%p1%p3%O IF (standout; reverse) OR
13619 # %t;7 THEN OUTPUT ;7
13621 # %?%p7 IF invisible
13622 # %t;8 THEN OUTPUT ;8
13625 # %?%p9 IF altcharset
13626 # %t^N THEN OUTPUT ^N
13627 # %e^O ELSE OUTPUT ^O
13629 # sgr0: Everything is turned off (including alternate character set), since
13630 # there is no way of knowing what it is that the program wants turned
13632 # smul: The "underline" attribute is reconfigurable to an overline or
13633 # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
13634 # bottom of the character cell. This was done to allow for more readable
13635 # underlined characters, and to be able to distinguish between an
13636 # underlined space, an underscore, and an underlined underscore.
13637 # xenl: Terminal can be configured to not need this, but this "glitch"
13638 # behavior is actually preferable with autowrap terminals.
13640 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
13641 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
13642 # string modifies the 'O' in kf43 to kf46 to a '$'.
13644 # kcbt was originally ^I but redefined in is2=.
13645 # kHOM was \E[H originally but redefined in is2=, as were a number of
13647 # kDC was originally \177 but redefined in is2=.
13649 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
13650 # tsl: Go to window 2, then do an hpa=.
13652 #------- flash=\E[8;3!}^G\E[3;3!}
13653 #------- flash=\E[?5h$<100>\E[?5l
13654 # There are two ways to flash the screen, both of which have their drawbacks.
13655 # The first is to set the bell mode to video, transmit a bell character, and
13656 # set the bell mode back - but to what? There is no way of knowing what the
13657 # user's old bell setting was before we messed with it. Worse, the command to
13658 # set the bell mode also sets the key click volume, and there is no way to say
13659 # "leave that alone", or to know what it's set to, either.
13660 # The second way to do a flash is to set the screen to inverse video, pad for a
13661 # tenth of a second, and set it back - but like before, there's no way to know
13662 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
13663 # it that way. The point is moot anyway, since vi (and probably other
13664 # programs) assume that by defining flash=, you want the computer to use it
13665 # INSTEAD of bel=, rather than as a secondary type of signal.
13667 #------- cvvis=\E[+{
13668 # The is the power on setting, which is also as visible as the cursor
13670 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
13671 # Windowing is possible, but not defined here because it is also used to
13672 # emulate status line functions. Allowing a program to set a window could
13673 # clobber the status line or render it unusable. There is additional memory,
13674 # but screen scroll functions are destructive and do not make use of it.
13676 #------- dim= Not available in power on mode.
13677 # You have a choice of defining low intensity characters as "half bright" and
13678 # high intensity as "normal", or defining low as "normal" and high as "bold".
13679 # No matter which you choose, only one of either "half bright" or "bold" is
13680 # available at any time, so taking the time to override the default is
13683 #------- prot=\E[=0;99m
13684 # Not defined, because it appears to have some strange side effects.
13685 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
13686 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
13687 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
13688 # Available, but making them available to programs is inadvisable.
13689 # The code to do this is:
13690 # %?%p1%{24}%< IF ((key; 24) <;
13691 # %p1%{30}%> ((key; 30) >;
13692 # %p1%{54}%< (key; 54) <
13695 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
13696 # %t\E[ THEN OUTPUT \E[
13697 # %p1%d OUTPUT (key) as decimal
13698 # [next line applies to pfx only]
13702 # %p2%s OUTPUT (string) as string
13704 # [DEL chosen as delimiter, but could be any character]
13705 # [implied: ELSE do nothing]
13709 # Not defined since anything it might do could be done faster and easier with
13710 # either Meta-Shift-Reset or the main power switch.
13712 #------- smkx=\E[1!z
13713 #------- rmkx=\E[!z
13714 # These sequences apply to the cursor and setup keys only, not to the
13715 # numeric keypad. But it doesn't matter anyway, since making these
13716 # available to programs is inadvisable.
13717 # For the key definitions below, all sequences beginning with \E$ are
13718 # custom and programmed into the terminal via is2. \E$ also has no
13719 # meaning to any other terminal.
13721 #------- cmdch=\E[;%p1%d!t
13722 # Available, but making it available to programs is inadvisable.
13723 #------- smxon=\E[1*q
13724 # Available, but making it available to programs is inadvisable.
13725 # Terminal will send XON/XOFF on buffer overflow.
13726 #------- rmxon=\E[*q
13727 # Available, but making it available to programs is inadvisable.
13728 # Terminal will not notify on buffer overflow.
13729 #------- smm=\E[2+x
13731 # Available, but making them available to programs is inadvisable.
13734 # It's not made clear in the manuals, but based on other ansi/vt type
13735 # terminals, it's a good guess that this terminal is capable of both
13736 # "transparent print" (which doesn't copy data to the screen, and
13737 # therefore needs mc5i: specified to say so) and "auxilliary print"
13738 # (which does duplicate printed data on the screen, in which case mc4=
13739 # and mc5= should use the \E[?4i and \E[?5i strings instead).
13741 hds200|Human Designed Systems HDS200,
13742 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
13743 cols#80, it#8, lines#24, lm#0,
13744 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
13745 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
13746 clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
13747 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
13748 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13749 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13750 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13751 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
13752 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
13753 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
13755 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
13756 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
13757 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13758 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
13759 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
13760 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
13761 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
13762 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
13763 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
13764 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
13765 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
13766 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
13767 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
13768 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
13769 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
13770 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
13771 nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l,
13772 rmso=\E[m\017, rmul=\E[m\017, sc=\E7,
13773 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13774 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
13775 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
13776 vpa=\E[%i%p1%dd, use=ansi+pp,
13778 # <ht> through <el> included to specify padding needed in raw mode.
13779 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
13780 avt-ns|concept avt no status line,
13781 OTbs, am, eo, mir, ul, xenl, xon,
13782 cols#80, it#8, lines#24, lm#192,
13783 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13784 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
13785 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13786 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
13787 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13788 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
13789 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
13790 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
13791 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
13792 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
13793 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
13794 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13795 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
13796 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
13797 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
13798 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
13799 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
13800 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
13801 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
13803 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e\016%;$<1>,
13804 sgr0=\E[m\016$<1>, smacs=\017$<1>,
13805 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
13806 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13807 vpa=\E[%p1%{1}%+%dd,
13808 avt-rv-ns|concept avt in reverse video mode/no status line,
13809 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
13811 avt-w-ns|concept avt in 132 column mode/no status line,
13812 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
13814 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
13815 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
13816 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
13818 # Concept AVT with status line. We get the status line using the
13819 # "Background status line" feature of the terminal. We swipe the
13820 # first line of memory in window 2 for the status line, keeping
13821 # 191 lines of memory and 24 screen lines for regular use.
13822 # The first line is used instead of the last so that this works
13823 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
13824 # assumes an 8 page AVT but lm isn't currently used anywhere.)
13826 avt+s|concept avt status line changes,
13829 dsl=\E[0*w, fsl=\E[1;1!w,
13830 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
13831 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
13832 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
13833 avt|avt-s|concept-avt|avt w/80 columns,
13834 use=avt+s, use=avt-ns,
13835 avt-rv|avt-rv-s|avt reverse video w/sl,
13836 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
13837 use=avt+s, use=avt-ns,
13838 avt-w|avt-w-s|concept avt 132 cols+status,
13839 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
13840 use=avt+s, use=avt-ns,
13841 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
13842 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
13843 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
13845 #### Contel Business Systems.
13848 # Contel c300 and c320 terminals.
13849 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
13851 cols#80, lines#24, xmc#1,
13852 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13853 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
13854 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
13855 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
13856 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
13857 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
13858 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
13859 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
13860 # Contel c301 and c321 terminals.
13861 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
13862 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
13865 #### Data General (dg)
13867 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
13868 # the terminals group at Data General was shut down in 1991; all these
13869 # terminals have thus been discontinued.
13871 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
13872 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
13873 # sequentially, first the unmodified key codes are listed as F1 through F15.
13874 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
13875 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
13876 # F46 through F60. This is done in the private "includes" below whose names
13877 # start with "dgkeys+".
13879 # DG terminals generally support 8 bit characters. For each of these terminals
13880 # two descriptions are supplied:
13881 # 1) A default description for 8 bits/character communications, which
13882 # uses the default DG international character set and keyboard codes.
13883 # 2) A description with suffix "-7b" for 7 bits/character communications.
13884 # This description must use the NON-DEFAULT native keyboard language.
13886 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
13887 # Ctrl/Shift fdkeys (kf34-kf44).
13889 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
13890 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
13891 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
13892 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
13893 kf11=\233011z, kf12=\233012z, kf13=\233013z,
13894 kf14=\233014z, kf15=\233000z, kf16=\233101z,
13895 kf17=\233102z, kf18=\233103z, kf19=\233104z,
13896 kf2=\233002z, kf20=\233105z, kf21=\233106z,
13897 kf22=\233107z, kf23=\233108z, kf24=\233109z,
13898 kf25=\233110z, kf26=\233111z, kf27=\233112z,
13899 kf28=\233113z, kf29=\233114z, kf3=\233003z,
13900 kf30=\233100z, kf31=\233201z, kf32=\233202z,
13901 kf33=\233203z, kf34=\233204z, kf35=\233205z,
13902 kf36=\233206z, kf37=\233207z, kf38=\233208z,
13903 kf39=\233209z, kf4=\233004z, kf40=\233210z,
13904 kf41=\233211z, kf42=\233212z, kf43=\233213z,
13905 kf44=\233214z, kf45=\233200z, kf46=\233301z,
13906 kf47=\233302z, kf48=\233303z, kf49=\233304z,
13907 kf5=\233005z, kf50=\233305z, kf51=\233306z,
13908 kf52=\233307z, kf53=\233308z, kf54=\233309z,
13909 kf55=\233310z, kf56=\233311z, kf57=\233312z,
13910 kf58=\233313z, kf59=\233314z, kf6=\233006z,
13911 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
13912 khome=\233H, kprt=\233i,
13914 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
13915 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
13916 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13917 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
13918 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
13919 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
13920 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
13921 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
13922 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
13923 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
13924 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
13925 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
13926 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
13927 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
13928 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
13929 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
13930 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
13931 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
13932 kf9=\E[009z, khome=\E[H, kprt=\E[i,
13934 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
13935 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
13936 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
13937 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
13938 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
13939 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
13940 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
13941 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
13942 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
13943 kf8=^^x, kf9=^^y, khome=^H,
13945 dgkeys+15|Private entry describing 15 DG mode special keys,
13946 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
13947 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
13948 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
13949 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
13950 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
13951 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
13952 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
13953 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
13954 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
13955 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
13956 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
13959 # Data General color terminals use the "Tektronix" color model. The total
13960 # number of colors varies with the terminal model, as does support for
13961 # attributes used in conjunction with color.
13963 # Removed u7, u8 definitions since they conflict with tack:
13964 # Preserve user-defined colors in at least some cases.
13966 # Default is ACM mode.
13967 # u8=^^F}20^^Fi^^F}21,
13969 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
13971 colors#16, ncv#53, pairs#256,
13973 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
13974 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
13975 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
13977 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
13980 # Video attributes are coordinated using static variables set by "sgr", then
13981 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
13982 # (D=dim, U=underline, B=blink, R=reverse.)
13983 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
13985 colors#8, ncv#16, pairs#64,
13986 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
13987 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13988 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13989 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13990 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13992 dg+color|Color info for Data General D470C terminals in ANSI mode,
13993 colors#16, ncv#53, pairs#256,
13994 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13995 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13996 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
13997 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14000 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
14002 colors#8, ncv#16, pairs#64,
14004 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
14005 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
14006 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
14008 dgmode+color|Color info for Data General D470C terminals in DG mode,
14009 colors#16, pairs#256,
14010 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
14011 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
14014 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
14016 colors#52, ncv#53, pairs#26,
14017 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
14018 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
14019 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
14020 scp=\036RG2%p1%02X,
14022 # Colors are in the order: normal, reverse, dim, dim + reverse.
14023 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
14025 colors#52, ncv#53, pairs#26,
14026 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
14027 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
14028 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
14029 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
14031 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
14032 # Initialization string 1 sets:
14033 # ^R - vertical scrolling enabled
14034 # ^C - blinking enabled
14035 dg-generic|Generic Data General terminal in DG mode,
14038 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
14039 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
14040 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
14041 smul=^T, use=dgkeys+11,
14043 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
14044 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
14045 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
14046 # maybe they were originally nuls (which would fit).
14048 dg200|data general dasher 200,
14051 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
14052 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
14053 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
14054 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
14055 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
14058 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
14059 dg210|dg-ansi|Data General 210/211,
14062 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
14063 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
14064 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14065 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
14066 smso=\E[7;m, smul=\E[4;m,
14067 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
14068 # courtesy of Carlos Rucalde of Vantage Software, Inc.
14069 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
14070 # I suspect the d200 function keys actually work on the dg211, check it out.)
14071 dg211|Data General d211,
14072 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
14073 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
14074 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
14076 # dg450 from Cornell (not official)
14077 dg450|dg6134|data general 6134,
14078 cub1@, cuf1=^X, use=dg200,
14081 # Note: lesser Dasher terminals will not work with vi because vi insists upon
14082 # having a command to move straight down from any position on the bottom line
14083 # and scroll the screen up, or a direct vertical scroll command. The 460 and
14084 # above have both, the D210/211, for instance, has neither. We must use ANSI
14085 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
14086 # backspace on all terminals. This is not so in DG mode.
14087 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
14088 # grounds that there is no matching ":ml:"
14089 dg460-ansi|Data General Dasher 460 in ANSI-mode,
14090 OTbs, am, msgr, ul,
14091 cols#80, it#8, lines#24,
14092 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
14093 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
14094 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
14095 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
14096 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14097 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
14098 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
14099 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
14100 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
14101 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
14102 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m,
14103 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
14104 u7=\E[6n, u8=\E[5n, u9=\E[0n,
14105 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
14106 # Data General 605x
14107 # Ought to work for a Model 6242, Type D210 as well as a 605x.
14108 # Note that the cursor-down key transmits ^Z. Job control users, beware!
14109 # This also matches a posted description of something called a `Dasher 100'
14110 # so there's a dg100 alias here.
14111 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
14112 dg6053-old|dg100|data general 6053,
14115 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
14116 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
14117 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
14118 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
14119 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
14120 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
14123 # (Some performance can be gained over the generic DG terminal type)
14124 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
14126 home=^P\0\0, ll=^P\0^W, use=dg-generic,
14128 # Like 6053, but adds reverse video and more keypad and function keys.
14129 d200|d200-dg|Data General DASHER D200,
14130 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
14131 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
14132 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
14135 # DASHER D210 series terminals in ANSI mode.
14136 # Reverse video, no insert/delete character/line, 7 bits/character only.
14138 # Initialization string 1 sets:
14139 # <0 - scrolling enabled
14140 # <1 - blink enabled
14141 # <4 - print characters regardless of attributes
14142 d210|d214|Data General DASHER D210 series,
14145 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
14146 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14147 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14148 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
14149 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
14150 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
14151 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|%p6%|%t7;%;m,
14152 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
14154 # DASHER D210 series terminals in DG mode.
14155 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
14156 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
14158 ed=^^FF, use=d200-dg,
14160 # DASHER D211 series terminals in ANSI mode.
14161 # Like the D210, but with 8-bit characters and local printer support.
14163 # Initialization string 2 sets:
14165 # 2;1 - 8 bit operations
14166 # 1;1 - 8 bit (international) keyboard language
14167 # \E(B - default primary character set (U.S. ASCII)
14168 # \E)4 - default secondary character set (international)
14169 # ^O - primary character set
14171 d211|d215|Data General DASHER D211 series,
14173 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
14176 # Initialization string 2 sets:
14178 # 2;0 - 7 bit operations
14179 # 1;0 - 7 bit (native) keyboard language
14180 # \E(0 - default character set (the keyboard native language)
14181 # ^O - primary character set
14182 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
14184 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
14186 # Like the D210 series, but adds support for 8-bit characters.
14188 # Reset string 2 sets:
14189 # ^^N - secondary character set
14190 # ^^FS0> - 8 bit international character set
14191 # ^^O - primary character set
14192 # ^^FS00 - default character set (matching the native keyboard language)
14194 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
14196 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
14198 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
14201 # Enhanced DG mode with changes to be more UNIX compatible.
14202 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
14205 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
14206 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
14207 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
14208 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
14209 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
14210 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
14211 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
14212 rs2=\036N\036FS0E\036O\036FS00,
14213 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
14214 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
14215 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
14216 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
14218 is3=\036Fz2, use=d216+,
14220 d217-unix|Data General DASHER D217 in DG-UNIX mode,
14222 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
14225 # DASHER D220 color terminal in ANSI mode.
14226 # Like the D470C but with fewer colors and screen editing features.
14228 # Initialization string 1 sets:
14230 # <0 - scrolling enabled
14231 # <1 - blink enabled
14232 # <4 - print characters regardless of attributes
14233 # \E[m - all attributes off
14234 # Reset string 1 sets:
14235 # \Ec - initial mode defaults (RIS)
14237 d220|Data General DASHER D220,
14239 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
14240 use=dg+color8, use=d470c,
14242 d220-7b|Data General DASHER D220 in 7 bit mode,
14244 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
14245 use=dg+color8, use=d470c-7b,
14247 # Initialization string 3 sets:
14248 # - default cursor (solid rectangle)
14249 # Reset string 2 sets:
14250 # ^^N - secondary character set
14251 # ^^FS0> - 8 bit international character set
14252 # ^^O - primary character set
14253 # ^^FS00 - default character set (matching the native keyboard language)
14255 d220-dg|Data General DASHER D220 color terminal in DG mode,
14257 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
14258 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
14261 # DASHER D230C color terminal in ANSI mode.
14262 # Like the D220 but with minor ANSI compatibility improvements.
14264 d230c|d230|Data General DASHER D230C,
14265 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
14266 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
14267 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
14268 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
14269 smul=\E[4;50m, use=dgkeys+7b, use=d220,
14271 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
14274 # DASHER D400/D450 series terminals.
14275 # These add intelligent features like insert/delete to the D200 series.
14277 # Initialization string 2 sets:
14278 # ^^FQ2 - default cursor (solid rectangle)
14279 # ^^FW - character protection disabled
14280 # ^^FJ - normal (80 column) mode
14281 # ^^F\^ - horizontal scrolling enabled (for alignment)
14282 # ^^FX004? - margins at columns 0 and 79
14283 # ^^F] - horizontal scrolling disabled
14284 # ^^O - primary character set
14285 # ^^FS00 - default character set (the keyboard native language)
14286 # - (should reset scrolling regions, but that glitches the screen)
14287 # Reset string 1 sets:
14288 # ^^FA - all terminal defaults except scroll rate
14289 # Reset string 2 sets:
14290 # ^^F] - horizontal scrolling disabled
14291 # ^^FT0 - jump scrolling
14293 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
14295 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
14296 cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
14297 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
14298 ich1=^^J, il1=^^FH,
14299 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
14300 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
14301 rs1=^^FA, rs2=\036F]\036FT0,
14302 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
14303 sgr0=\017\025\035\036E\036O, smacs=^^N,
14304 vpa=\020\177%p1%c, use=d210-dg,
14306 # DASHER D410/D460 series terminals in ANSI mode.
14307 # These add a large number of intelligent terminal features.
14309 # Initialization string 1 sets:
14311 # <0 - scrolling enabled
14312 # <1 - blink enabled
14313 # <2 - horizontal scrolling enabled (for alignment)
14314 # <4 - print characters regardless of attributes
14315 # \E[5;0v - normal (80 column) mode
14316 # \E[1;1;80w - margins at columns 1 and 80
14318 # 1 - print all characters even if protected
14319 # 6 - character protection disabled
14320 # <2 - horizontal scrolling disabled
14321 # - (should reset scrolling regions, but that glitches the screen)
14323 # Initialization string 2 sets:
14325 # 3;2 - default cursor (solid rectangle)
14326 # 2;1 - 8 bit operations
14327 # 1;1 - international keyboard language
14328 # \E(B - default primary character set (U.S. ASCII)
14329 # \E)4 - default secondary character set (international)
14330 # ^O - primary character set
14332 # Reset string 1 sets:
14333 # \Ec - initial mode defaults (RIS)
14334 # \E[<2h - horizontal scrolling disabled
14336 # Reset string 2 sets:
14338 # 4;0 - jump scrolling
14339 # 2;1 - 8 bit operations
14340 # 1;1 - 8 bit (international) keyboard language
14341 # \E(B - default primary character set (U.S. ASCII)
14342 # \E)4 - default secondary character set (international)
14344 d410|d411|d460|d461|Data General DASHER D410/D460 series,
14346 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
14347 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14348 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
14349 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
14350 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
14351 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
14352 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
14353 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5%|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
14354 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
14356 # Initialization string 2 sets:
14358 # 3;2 - default cursor (solid rectangle)
14359 # 2;0 - 7 bit operations
14360 # 1;0 - 7 bit (native) keyboard language
14361 # \E(0 - default character set (the keyboard native language)
14362 # ^O - primary character set
14364 # Reset string 2 sets:
14366 # 4;0 - jump scrolling
14367 # 2;0 - 7 bit operations
14368 # 1;0 - 7 bit (native) keyboard language
14369 # \E(0 - default character set (the keyboard native language)
14371 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
14373 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
14374 rs2=\E[4;0;2;0;1;0v\E(0,
14375 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
14376 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
14378 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
14380 enacs@, rmacs=\036FS00,
14381 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
14382 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
14385 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
14387 # Initialization string 1 sets:
14389 # <0 - scrolling enabled
14390 # <1 - blink enabled
14391 # <2 - horizontal scrolling enabled (for alignment)
14392 # <4 - print characters regardless of attributes
14393 # \E[5;1v - compressed (135 column) mode
14394 # \E[1;1;126 - margins at columns 1 and 126
14396 # 1 - print all characters even if protected
14397 # 6 - character protection disabled
14398 # <2 - horizontal scrolling disabled
14399 # - (should reset scrolling regions, but that glitches the screen)
14401 # Reset string 1 sets:
14402 # \Ec - initial mode defaults (RIS)
14403 # \E[5;1v - compressed (135 column) mode
14404 # \E[1;1;126w - margins at columns 1 and 126
14405 # \E[<2h - horizontal scrolling disabled
14407 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
14409 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
14410 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
14412 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
14414 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
14415 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
14417 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
14420 # These add intelligent features like scrolling regions.
14421 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
14422 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
14423 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
14424 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
14425 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
14426 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
14427 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
14428 vpa=\036FPFF%p1%2.2X,
14429 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
14431 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
14433 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
14434 rs2=\036P@1\036FK\036FX0083,
14435 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
14437 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
14440 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
14442 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
14444 clear=\036FG\036PH, fsl=\036F}01\022,
14445 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
14446 tsl=\036F}00\036FP%p1%2.2X18\036PG,
14447 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
14450 # Relative cursor motions are confined to the current window,
14451 # which is not what the scrolling region specification expects.
14452 # Thus, relative vertical cursor positioning must be deleted.
14453 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
14454 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
14455 cud1@, cuu1@, ll@, use=d462+,
14457 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
14459 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
14461 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
14463 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
14465 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
14468 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
14470 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
14472 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
14474 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
14476 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
14479 d430c-dg|d430-dg|Data General D430C in DG mode,
14480 use=d413-dg, use=dg+fixed,
14481 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
14482 use=d413-dg, use=dg+ccc,
14484 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
14485 use=d413-unix, use=dgunix+fixed,
14486 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
14487 use=d413-unix-w, use=dgunix+fixed,
14488 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
14489 use=d413-unix-25, use=dgunix+fixed,
14490 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
14491 use=d413-unix-s, use=dgunix+fixed,
14492 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
14493 use=d413-unix-sr, use=dgunix+fixed,
14494 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
14495 use=d413-unix, use=dgunix+ccc,
14496 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
14497 use=d413-unix-w, use=dgunix+ccc,
14498 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
14499 use=d413-unix-25, use=dgunix+ccc,
14500 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
14501 use=d413-unix-s, use=dgunix+ccc,
14502 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
14503 use=d413-unix-sr, use=dgunix+ccc,
14505 # DASHER D470C color terminal in ANSI mode.
14506 # Like the D460 but with 16 colors and without a compressed mode.
14508 # Initialization string 1 sets:
14510 # <0 - scrolling enabled
14511 # <1 - blink enabled
14512 # <2 - horizontal scrolling enabled (for alignment)
14513 # <4 - print characters regardless of attributes
14514 # \E[1;1;80w - margins at columns 1 and 80
14516 # 1 - print all characters even if protected
14517 # 6 - character protection disabled
14518 # <2 - horizontal scrolling disabled
14519 # - (should reset scrolling regions, but that glitches the screen)
14521 d470c|d470|Data General DASHER D470C,
14522 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
14523 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
14524 use=dg+color, use=d460,
14526 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
14527 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
14528 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
14529 use=dg+color, use=d460-7b,
14531 # Initialization string 2 sets:
14532 # ^^FQ2 - default cursor (solid rectangle)
14533 # ^^FW - character protection disabled
14534 # ^^F\^ - horizontal scrolling enabled (for alignment)
14535 # ^^FX004? - margins at columns 0 and 79
14536 # ^^F] - horizontal scrolling disabled
14537 # ^^O - primary character set
14538 # ^^FS00 - default character set (the keyboard native language)
14539 # - (should reset scrolling regions, but that glitches the screen)
14541 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
14542 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
14543 use=dgmode+color, use=d460-dg,
14545 # DASHER D555 terminal in ANSI mode.
14546 # Like a D411, but has an integrated phone.
14547 d555|Data General DASHER D555,
14549 d555-7b|Data General DASHER D555 in 7-bit mode,
14551 d555-w|Data General DASHER D555 in wide mode,
14553 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
14555 d555-dg|Data General DASHER D555 series in DG mode,
14558 # DASHER D577 terminal in ANSI mode.
14559 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
14560 d577|Data General DASHER D577,
14562 d577-7b|Data General DASHER D577 in 7-bit mode,
14564 d577-w|Data General DASHER D577 in wide mode,
14566 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
14569 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
14572 # DASHER D578 terminal.
14573 # Like a D577, but without compressed mode; like a D470C in this respect.
14575 # Initialization string 1 sets:
14577 # <0 - scrolling enabled
14578 # <1 - blink enabled
14579 # <2 - horizontal scrolling enabled (for alignment)
14580 # <4 - print characters regardless of attributes
14581 # \E[1;1;80w - margins at columns 1 and 80
14583 # 1 - print all characters even if protected
14584 # 6 - character protection disabled
14585 # <2 - horizontal scrolling disabled
14586 # - (should reset scrolling regions, but that glitches the screen)
14588 d578|Data General DASHER D578,
14589 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
14590 d578-7b|Data General DASHER D578 in 7-bit mode,
14591 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
14593 #### Datamedia (dm)
14595 # Datamedia was headquartered in Nashua, New Hampshire until it went
14596 # out of business in 1993, but the ID plates on the terminals referred
14597 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
14598 # manufacturer which threw out all information about the terminals.
14601 cs10|colorscan|Datamedia Color Scan 10,
14604 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
14605 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
14606 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14607 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
14608 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
14609 cs10-w|Datamedia Color Scan 10 with 132 columns,
14611 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
14613 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
14614 dm1520|dm1521|datamedia 1520,
14616 cols#80, it#8, lines#24,
14617 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
14618 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
14619 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
14621 # dm2500: this terminal has both <ich> and <smir>. Applications using
14622 # termcap/terminfo directly (rather than through ncurses) might be confused.
14623 dm2500|datamedia2500|datamedia 2500,
14626 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
14627 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
14628 dch1=\020\010\030\035$<10*>,
14629 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
14630 ich1=\020\034\030\035$<10*>,
14631 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
14632 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
14633 smdc=^P, smir=^P, smso=^N,
14634 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
14635 # also, has a meta-key.
14636 # From: <goldberger@su-csli.arpa>
14637 # (dmchat: ":MT:" changed to ":km:" -- esr)
14638 dmchat|dmchat version of datamedia 2500,
14640 dl1=\020\032\030\035$<2/>,
14641 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
14642 # (dm3025: ":MT:" changed to ":km:" -- esr)
14643 dm3025|datamedia 3025a,
14645 cols#80, it#8, lines#24,
14646 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
14647 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
14648 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
14649 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
14650 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
14651 smir=\EP, smso=\EO1,
14652 dm3045|datamedia 3045a,
14653 OTbs, am, eo, km@, ul, xenl,
14654 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
14655 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
14656 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
14657 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
14659 # Datamedia DT80 soft switches:
14660 # 1 0=Jump 1=Smooth
14661 # Autorepeat 0=off 1=on
14662 # Screen 0=Dark 1=light
14663 # Cursor 0=u/l 1=block
14665 # 2 Margin Bell 0=off 1=on
14666 # Keyclick 0=off 1=on
14667 # Ansi/VT52 0=VT52 1=Ansi
14668 # Xon/Xoff 0=Off 1=On
14670 # 3 Shift3 0=Hash 1=UK Pound
14672 # Newline 0=Off 1=On
14673 # Interlace 0=Off 1=On
14675 # 4 Parity 0=Odd 1=Even
14676 # Parity 0=Off 1=On
14677 # Bits/Char 0=7 1=8
14678 # Power 0=60Hz 1=50Hz
14680 # 5 Line Interface 0=EIA 1=Loop
14681 # Aux Interface 0=EIA 1=Loop
14682 # Local Copy 0=Off 1=On
14685 # 6 Aux Parity 0=Odd 1=Even
14686 # Aux Parity 0=Off 1=On
14687 # Aux Bits/Char 0=7 1=8
14688 # CRT Saver 0=Off 1=On
14689 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
14690 dm80|dmdt80|dt80|datamedia dt80/1,
14691 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
14692 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
14693 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
14694 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
14696 # except in 132 column mode, where it needs a little padding.
14697 # This is still less padding than the vt100, and you can always turn on
14698 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
14700 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
14702 clear=\E[H\E[2J$<50/>, cud1=^J,
14703 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
14704 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
14705 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
14706 dt80-sas|Datamedia DT803/DTX for SAS usage,
14709 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
14710 bel=^G, clear=^L, cr=^M,
14711 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
14712 cub1=^H, cud1=\EB, cuf1=^\,
14713 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
14714 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
14715 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
14716 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
14717 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
14718 smso=\E$2\004, tbc=\E'0,
14720 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
14721 # These aren't end-all Excel termcaps; but do insert/delete char/line
14722 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
14723 # The naming convention has been bent somewhat, with the use of E? (where
14724 # E is for 'Excel') as # a name. This was done to distinguish the entries
14725 # from the other Datamedias in use here, and yet to associate a model of
14726 # the Excel terminals with the regular datamedia terminals that share
14727 # major characteristics.
14728 excel62|excel64|datamedia Excel 62,
14729 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
14730 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
14732 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
14733 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
14734 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
14736 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
14737 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
14738 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
14739 smir=\E[4h, use=dt80,
14743 # Falco Data Products
14744 # 440 Potrero Avenue
14745 # Sunnyvale, CA 940864-196
14746 # Vox: (800)-325-2648
14747 # Fax: (408)-745-7860
14748 # Net: techsup@charm.sys.falco.com
14750 # Current Falco models as of 1995 are generally ANSI-compatible and support
14751 # emulations of DEC VT-series, Wyse, and Televideo types.
14754 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
14755 # This terminal was released around 1983 and was discontinued long ago.
14756 # The standout and underline highlights are the same.
14757 falco|ts1|ts-1|falco ts-1,
14759 cols#80, it#8, lines#24,
14760 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14761 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14762 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
14763 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
14764 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
14765 smir=\Eq, smso=\Eg1, smul=\Eg1,
14766 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
14767 OTbs, am, da, db, mir, msgr, ul,
14768 cols#80, it#8, lines#24,
14769 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
14770 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
14771 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
14772 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
14773 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
14774 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
14775 smso=\Eg4, smul=\Eg1,
14776 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
14777 ts100|ts100-sp|falco ts100-sp,
14778 am, mir, msgr, xenl, xon,
14779 cols#80, it#8, lines#24, vt#3,
14780 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14781 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
14782 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
14783 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
14784 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
14785 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
14786 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
14787 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
14788 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
14789 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14790 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
14791 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
14792 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
14793 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
14794 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
14795 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
14797 ts100-ctxt|falco ts-100 saving context,
14798 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
14800 #### Florida Computer Graphics
14803 # Florida Computer Graphics Beacon System, using terminal emulator program
14804 # "host.com", as provided by FCG. This description is for an early release
14805 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
14808 # From: David Bryant <cbosg!djb> 1/7/83
14809 beacon|FCG Beacon System,
14812 bel=\ESTART\r\E37\r\EEND\r$<1>,
14813 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
14814 cub1=^H, cud1=^J, cuf1=\EV,
14815 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
14816 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
14817 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
14818 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
14819 rmul=\ESTART\r\E60\,0\r\EEND\r,
14820 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
14821 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
14822 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
14823 smul=\ESTART\r\E60\,1\r\EEND\r,
14828 # The f1720a differences from ANSI: no auto margin, destructive
14829 # tabs, # of lines, funny highlighting and underlining
14830 f1720|f1720a|fluke 1720A,
14832 cols#80, lines#16, xmc#1,
14833 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
14834 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
14835 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
14836 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
14837 smso=\E[7m, smul=\E[4m,
14839 #### Liberty Electronics (Freedom)
14841 # Liberty Electronics
14842 # 48089 Fremont Blvd
14844 # Vox: (510)-623-6000
14845 # Fax: (510)-623-7021
14847 # From: <faletti@berkeley.edu>
14848 # (f100: added empty <acsc> to suppress a tic warning;
14849 # made this relative to adm+sgr -- note that <invis> isn't
14850 # known to work for f100 but does on the f110. --esr)
14851 f100|freedom|freedom100|freedom model 100,
14852 OTbs, am, bw, hs, mir, msgr, xon,
14854 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
14855 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14856 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
14857 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
14858 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
14859 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
14860 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
14861 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14862 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
14863 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
14864 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
14865 f100-rv|freedom-rv|freedom 100 in reverse video,
14866 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
14867 # The f110 and f200 have problems with vi(1). They use the ^V
14868 # code for the down cursor key. When kcud1 is defined in terminfo
14869 # as ^V, the Control Character Quoting capability (^V in insert mode)
14870 # is lost! It cannot be remapped in vi because it is necessary to enter
14871 # a ^V to to quote the ^V that is being remapped!!!
14873 # f110/f200 users will have to decide whether
14874 # to lose the down cursor key or the quoting capability. We will opt
14875 # initially for leaving the quoting capability out, since use of VI
14876 # is not generally applicable to most interactive applications
14877 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
14878 f110|freedom110|Liberty Freedom 110,
14881 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
14882 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
14883 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
14884 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
14885 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
14886 smso=\EG<, tsl=\Ef, use=f100,
14887 f110-14|Liberty Freedom 110 14inch,
14889 f110-w|Liberty Freedom 110 - 132 cols,
14890 cols#132, use=f110,
14891 f110-14w|Liberty Freedom 110 14in/132 cols,
14894 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
14895 f200|freedom200|Liberty Freedom 200,
14896 OTbs, am, eslok, hs, mir, msgr, xon,
14897 cols#80, it#8, lines#24, wsl#80,
14898 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
14899 clear=^Z, cnorm=\E.1, cr=^M,
14900 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
14901 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14902 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
14903 flash=\Eo$<200/>\En, fsl=^M, home=^^,
14904 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
14905 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
14906 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
14907 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
14908 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
14909 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
14910 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
14911 f200-w|Liberty Freedom 200 - 132 cols,
14912 cols#132, use=f200,
14913 # The f200 has the ability to reprogram the down cursor key. The key is
14914 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
14915 # so powering the terminal off and on will not cause the change to be lost.
14916 f200vi|Liberty Freedom 200 for vi,
14917 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
14918 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
14919 cols#132, use=f200vi,
14923 # Graphon Corporation
14924 # 544 Division Street
14925 # Campbell, CA 95008
14926 # Vox: (408)-370-4080
14927 # Fax: (408)-370-5047
14928 # Net: troy@graphon.com (Troy Morrison)
14931 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
14932 # including one odd hybrid that starts out life on power-up as a character
14933 # terminal, than can be switched to X graphics mode (driven over the serial
14934 # line) by an escape sequence. No info on this beast yet.
14935 # (go140: I added <rmam>/<smam> based on the init string -- esr)
14936 go140|graphon go-140,
14938 cols#80, it#8, lines#24,
14939 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
14940 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
14941 ed=\E[J$<10/>, el=\E[K, ht=^I,
14942 if=/usr/share/tabset/vt100, il1=\E[L,
14943 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
14944 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
14945 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
14946 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
14947 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
14948 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
14949 go140w|graphon go-140 in 132 column mode,
14952 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
14954 # Hacked up vt200 termcap to handle GO-225/VT220
14955 # From: <edm@nwnexus.WA.COM>
14956 # (go225: I added <rmam>/<smam> based on the init string -- esr)
14957 go225|go-225|Graphon 225,
14958 OTbs, am, mir, xenl,
14959 cols#80, it#8, lines#25, vt#3,
14960 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
14961 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
14962 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
14963 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
14964 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
14965 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
14966 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
14967 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
14968 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
14969 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
14970 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
14971 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
14973 #### Harris (Beehive)
14975 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
14976 # Their terminal group is ancient history now (1995) though the parent
14977 # company is still in business.
14980 # Beehive documentation is undated and marked Preliminary and has no figures
14981 # so we must have early Superbee2 (Model 600, according to phone conversation
14982 # with mfr.). It has proved reliable except for some missing padding
14983 # (notably after \EK and <nl> at bottom of screen).
14985 # The key idea is that AEP mode is poison for <cup> & that US's in
14986 # the local memory should be avoided like the plague. That means
14987 # that the 2048 character local buffer is used as 25 lines of 80
14988 # characters, period. No scrolling local memory, folks. It also
14989 # appears that we cannot use naked INS LINE feature since it uses
14990 # US. The sbi fakes <il1> with an 80-space insert that may be too
14991 # slow at low speeds; also spaces get converted to \040 which is
14992 # too long for some programs (not vi). DEL LINE is ok but slow.
14994 # The <nl> string is designed for last line of screen ONLY; cup to
14995 # 25th line corrects the motion inherent in scrolling to Page 1.
14997 # There is one understood bug. It is that the screen appears to
14998 # pop to a new (blank) page after a <nel>, or leave a half-line
14999 # ellipsis to a quad that is the extra 48 memory locations. The
15000 # data received is dumped into memory but not displayed. Not to
15001 # worry if <cup> is being used; the lines not displayed will be,
15002 # whenever the cursor is moved up there. Since <cup> is addressed
15003 # relative to MEMORY of window, nothing is lost; but beware of
15004 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
15005 # therefore, is setenv MORE -c .
15007 # WARNING: Not all features tested.
15009 # Timings are assembled from 3 sources. Some timings may reflect
15010 # SB2/Model 300 that were used if more conservative.
15011 # Tested on a Model 600 at 1200 and 9600 bd.
15013 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
15014 # placed on the keyboard and useless because of AEP, is made
15015 # into a backspace key. In use ESC must be pressed twice (to send)
15016 # and sending ^C must be prefixed by ESC to avoid that weird
15017 # transmit mode associated with ENTER key.
15019 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
15020 # the screen, then it has dropped into ENTER mode; hit
15021 # RESET--ONLINE--!tset.
15023 # As delivered this machine has a FATAL feature that will throw
15024 # it into that strange transmit state (SPOW) if the space bar is
15025 # hit after a CR is received, but before receiving a LF (or a
15028 # The circuits MUST be modified to eliminate the SPOW latch.
15029 # This is done by strapping on chip A46 of the I/O board; cut
15030 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
15031 # chip. This mod has been checked out on a Mod 600 of Superbee II.
15032 # With this modification absurdly high timings on cr are
15035 # NOTE WELL that the rear panel switch should be set to CR/LF,
15038 sb1|beehive superbee,
15039 OTbs, am, bw, da, db, mir, ul, xsb,
15040 cols#80, lines#25, xmc#1,
15041 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
15042 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
15043 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
15044 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
15045 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
15046 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
15047 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
15048 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
15049 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
15050 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
15051 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
15052 smso=\E_1, smul=\E_0, tbc=\E3,
15053 sbi|superbee|beehive superbee at Indiana U.,
15055 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
15057 # Alternate (older) description of Superbee - f1=escape, f2=^C.
15058 # Note: there are at least 3 kinds of superbees in the world. The sb1
15059 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
15060 # The sb3 puts garbage on the bottom of the screen when you scroll with
15061 # the switch in the back set to CRLF instead of AEP. This description
15062 # is tested on the sb2 but should work on all with either switch setting.
15063 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
15064 # the other two if you want to try to hit that tiny escape key.
15065 # This description is tricky: being able to use cup depends on there being
15066 # 2048 bytes of memory and the hairy <nl> string.
15067 superbee-xsb|beehive super bee,
15069 cols#80, it#8, lines#25,
15070 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
15071 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
15072 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
15073 home=\EH, ht=^I, hts=\E1,
15074 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
15075 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
15076 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
15077 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
15078 # This loses on lines > 80 chars long, use at your own risk
15079 superbeeic|super bee with insert char,
15080 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
15081 sb2|sb3|fixed superbee,
15082 xsb@, use=superbee,
15084 #### Beehive Medical Electronics
15086 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
15087 # Regarding your question though; Beehive terminals weren't made by Harris.
15088 # They were made by Beehive Medical Electronics in Utah. They went out of
15089 # business in the early '80s.
15091 # (OK, then, I don't know why a couple of these say "harris beehive".)
15094 # Reports are that most of these Beehive entries (except superbee) have not
15095 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
15097 # (bee: <ich1> was empty, which is obviously bogus -- esr)
15098 beehive|bee|harris beehive,
15101 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
15102 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
15103 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
15104 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15105 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
15106 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
15107 smir=\EQ, smso=\EdP, smul=\Ed`,
15108 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
15109 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
15110 # look at those spaces in <rmso>/<smso>. Seems strange to me...
15111 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
15112 # really care, cook up one using ^F -- esr)
15113 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
15115 cols#80, it#8, lines#20,
15116 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
15117 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
15118 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
15119 beehive4|bh4|beehive 4,
15122 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
15123 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
15124 # There was an early Australian kit-built computer called a "Microbee".
15125 # It's not clear whether this is for one of those or for a relative
15127 microb|microbee|micro bee series,
15129 cols#80, it#8, lines#24,
15130 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15131 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15132 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
15133 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
15134 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
15135 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
15137 # 8675, 8686, and bee from Cyrus Rahman
15138 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
15139 ha8675|harris 8675,
15140 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
15141 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
15142 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
15143 kf8=\177, kf9=\Ee, use=bee,
15144 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
15146 ha8686|harris 8686,
15147 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
15148 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
15149 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
15150 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
15151 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
15156 # Hazeltine appears to be out of the terminal business as of 1995. These
15157 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
15158 # Harris. They have a hazeltine.com domain (but no web page there ) and can
15162 # 450 East Pulaski Road
15163 # Greenlawn, New York 11740
15165 # As late as 1993, manuals for the terminal product line could still be
15168 # TRW Customer Service Division
15171 # Fairfield, NJ 07007-2078
15173 # They're now (1998) a subsidiary of General Electric, operating under the
15174 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
15175 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
15178 # Since <cuf1> is blank, when you want to erase something you
15179 # are out of luck. You will have to do ^L's a lot to
15180 # redraw the screen. h1000 is untested. It doesn't work in
15181 # vi - this terminal is too dumb for even vi. (The code is
15182 # there but it isn't debugged for this case.)
15183 hz1000|hazeltine 1000,
15186 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
15188 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
15189 hz1420|hazeltine 1420,
15192 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
15193 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
15194 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
15196 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
15197 # freakout with out-of-range args and tn3270. No hz since it needs to
15199 hz1500|hazeltine 1500,
15202 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
15203 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
15204 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
15205 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
15206 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
15207 # h1510 assumed to be in sane escape mode. Else use h1500.
15208 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
15209 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
15210 # removed incorrect and overridden ":do=^J:" -- esr)
15211 hz1510|hazeltine 1510,
15214 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
15215 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
15216 el=\E^O, il1=\E^Z, ind=^J,
15218 # The following switch settings are assumed for normal operation:
15219 # FULL CR U/L_CASE ESCAPE
15220 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
15221 # Other switches may be set for operator convenience or communication
15223 hz1520|Hazeltine 1520,
15224 OTbs, am, bw, msgr,
15226 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
15227 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
15228 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
15229 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
15230 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
15231 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
15232 # This version works with the escape switch off
15233 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
15234 hz1520-noesc|hazeltine 1520,
15237 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
15238 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
15239 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
15240 # Note: the h1552 appears to be the first Hazeltine terminal which
15241 # is not braindamaged. It has tildes and backprimes and everything!
15242 # Be sure the auto lf/cr switch is set to cr.
15243 hz1552|hazeltine 1552,
15245 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
15246 lf2=red, lf3=green, use=vt52,
15247 hz1552-rv|hazeltine 1552 reverse video,
15248 cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
15249 # Note: h2000 won't work well because of a clash between upper case and ~'s.
15250 hz2000|hazeltine 2000,
15253 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
15254 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
15255 il1=~\032$<6>, ind=^J, pad=\177,
15256 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
15257 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
15258 # to work ok. There is one problem though if one types a lot of garbage
15259 # characters very fast vi seems not able to keep up and hangs while trying
15260 # to insert. That's in insert mode while trying to insert in the middle of
15261 # a line. It might be because the Esprit doesn't have insert char and delete
15262 # char as a built in function. Vi has to delete to end of line and then
15263 # redraw the rest of the line.
15264 esprit|Hazeltine Esprit I,
15267 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
15268 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
15269 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
15270 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
15271 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
15272 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
15273 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
15274 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
15275 esprit-am|hazeltine esprit auto-margin,
15277 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
15278 # Vi it seems always wants to send a control J for "do" and it turned out
15279 # that the terminal would work somewhat if the auto LF/CR was turned off.
15280 # (hmod1: removed :dn=~^K: -- esr)
15281 hmod1|Hazeltine Modular 1,
15284 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
15285 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
15286 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
15287 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
15289 # Hazeltine Executive 80 Model 30 (1554?)
15290 # from Will Martin <control@ALMSA-1.ARPA> via BRL
15291 # Like VT100, except for different "am" behavior.
15292 hazel|exec80|h80|he80|Hazeltine Executive 80,
15294 cols#80, it#8, lines#24, vt#3,
15295 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
15296 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
15297 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
15298 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
15299 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
15300 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
15301 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
15302 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
15303 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
15304 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
15305 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15306 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
15312 ibm327x|line mode IBM 3270 style,
15314 clear=^M^J, el=^M, home=^M,
15316 ibm3101|i3101|IBM 3101-10,
15319 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15320 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15321 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
15322 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
15323 ibm3151|IBM 3151 display,
15324 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
15325 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
15326 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
15327 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
15328 # removed kend, knp, kpp -TD
15330 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
15331 # Added ich1 (kich1 without ich1 doesn't make sense).
15332 # Added il1 (kil1 without il1 doesn't make sense).
15333 # Added xon (terminal uses XON/XOFF flow control).
15335 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
15336 OTbs, am, mir, msgr, xon,
15337 cols#80, it#8, lines#24,
15338 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
15339 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
15340 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
15341 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
15342 ich1=\EP \010, il1=\EN, ind=^J, invis=\E4P, kbs=^H, kcbt=\E2,
15343 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
15344 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
15345 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
15346 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
15347 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
15348 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
15349 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
15350 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
15351 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
15352 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
15353 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
15354 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
15356 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
15357 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
15359 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
15360 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
15363 ibm3162|IBM 3162 display,
15364 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
15365 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
15368 # This really should not use setab/setaf, but it is clear that the
15369 # original terminfo does not toggle red/blue colors as in setb/setf.
15370 ibm3164|i3164|IBM 3164,
15372 colors#8, pairs#64,
15373 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
15374 setab=\E4 %p1%{64}%+%c,
15375 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
15376 smcup=\E!9/N\E>B, use=ibm3161,
15378 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
15380 cols#80, it#8, lines#25,
15381 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
15382 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
15383 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15384 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15385 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
15386 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
15387 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
15388 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
15389 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
15390 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
15391 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
15392 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
15393 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
15394 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
15395 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
15396 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
15397 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
15398 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
15399 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
15400 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
15401 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
15402 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
15403 rmso=\E[m, rmul=\E[m, rs2=\Ec,
15404 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
15405 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15407 ibmaed|IBM Experimental display,
15408 OTbs, am, eo, msgr,
15409 cols#80, it#8, lines#52,
15410 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
15411 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
15412 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
15413 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15414 rmso=\E0, sgr0=\E0, smso=\E0,
15415 ibm-apl|apl|IBM apl terminal simulator,
15416 lines#25, use=dm1520,
15417 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
15418 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
15419 ibmmono|IBM workstation monochrome,
15421 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
15422 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
15423 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
15424 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
15425 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
15426 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
15428 ibmega|IBM Enhanced Color Display,
15429 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
15430 nel=^M^J, use=ibmmono,
15431 # This color scheme is assumed in some recent IBM terminal descriptions
15432 # (green on black, emulated on a 16-color terminal).
15433 ibm+color|IBM color definitions,
15434 colors#8, ncv#3, pairs#64,
15436 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
15437 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
15438 ibm+16color|IBM aixterm color definitions,
15439 colors#16, pairs#256,
15440 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
15441 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
15442 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
15443 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
15444 ibm5154|IBM 5154 Color display,
15445 colors#8, ncv@, pairs#64,
15446 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
15448 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
15449 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
15451 ibmvga-c|IBM VGA display color termcap,
15452 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
15453 nel=^M^J, use=ibmega-c,
15454 ibmvga|IBM VGA display,
15455 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
15456 nel=^M^J, use=ibmega,
15457 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
15458 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
15460 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
15461 ibm6155|IBM 6155 Black & White display,
15462 blink@, bold@, use=ibm5151,
15463 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
15464 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
15466 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
15467 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
15469 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
15471 ibm6154|IBM 6154 Color displays,
15472 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
15473 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
15474 sgr0=\E[0;10m, use=ibm5154,
15475 ibm6153|IBM 6153 Black & White display,
15476 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
15477 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
15478 sgr0=\E[0;10m, use=ibm5151,
15479 ibm6153-90|IBM 6153 Black & White display,
15481 blink@, bold@, use=ibm5151,
15482 ibm6153-40|IBM 6153 Black & White display,
15483 cols#40, lines#12, use=ibm6153-90,
15484 ibm8512|ibm8513|IBM color VGA Terminal,
15486 cols#80, it#8, lines#25,
15487 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
15488 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
15489 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
15490 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
15491 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
15492 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
15493 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
15494 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
15495 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
15496 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
15497 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
15498 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
15499 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15501 hft-c|HFT with Color,
15502 colors#8, pairs#64,
15503 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
15504 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
15505 use=ibm5151, use=ibm+color,
15506 hft-c-old|HFT with Color PC850,
15507 colors#8, pairs#64,
15508 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
15510 hft-old|AIWS High Function Terminal,
15513 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
15514 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15515 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
15516 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
15517 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15518 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
15519 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
15520 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
15521 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
15522 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
15523 ibm-system1|system1|ibm system/1 computer,
15526 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
15527 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
15529 # lft-pc850 : IBM Low Function Terminal Device
15530 # lft "supports" underline, bold, and blink in the sense that the lft code
15531 # sets all the right bits. HOWEVER, depending upon the adapter, these
15532 # attributes may or may not be supported by the device driver.
15533 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
15535 cols#80, it#8, lines#25,
15536 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
15537 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
15538 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
15539 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15540 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
15541 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
15542 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
15543 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
15544 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
15545 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
15546 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
15547 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
15548 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
15549 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
15550 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
15551 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
15552 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
15553 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
15554 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
15555 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
15556 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
15557 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
15558 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
15559 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
15560 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
15562 # "Megapel" refers to the display adapter, which was used with the IBM RT
15564 ibm5081|hft|IBM Megapel Color display,
15565 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
15566 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
15567 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
15570 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
15572 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
15574 ibm8514|IBM 8514/a color VGA display,
15576 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
15577 ibm8514-c|IBM 8514 color display with standout and underline,
15580 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
15581 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
15585 # AIX entries. IBM ships these with AIX 3.2.5.
15586 # -- added rc, sc based on manpage -TD
15587 # Note that we could use ibm+16color, but that is not how IBM defines this one.
15588 aixterm|IBM Aixterm Terminal Emulator,
15590 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
15591 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
15592 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
15593 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
15594 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
15596 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
15597 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
15598 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
15599 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
15600 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
15602 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
15603 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
15604 tsl=\E[?%p1%dT, use=ibm6153,
15605 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
15606 acsc@, use=aixterm,
15607 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
15608 acsc@, use=aixterm-m,
15610 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
15611 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
15612 use=ibm+16color, use=aixterm,
15614 #### Infoton/General Terminal Corp.
15617 # gt100 sounds like something DEC would come out with. Let's hope they don't.
15618 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
15621 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15622 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
15623 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
15624 ind=^J, rmso=\Ea, smso=\Eb,
15628 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
15629 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
15630 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
15631 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
15632 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
15636 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
15637 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
15638 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
15642 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
15643 ed=^K, ind=^J, ll=^H^\,
15645 # The ICL6402 was actually the Kokusai Display System 6402.
15646 # The 6404 was the KDS7372 (color version of the 6402).
15648 # ICL6404 control codes follow:
15651 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
15652 #ctrl-A set SOM position at cursor position
15658 #ctrl-L Cursor right
15659 #ctrl-M Carriage return
15660 #ctrl-N Disable xon/xoff to host
15661 #ctrl-O Enable xon/xoff to host
15662 #ctrl-R Enable bidirectional mode
15663 #ctrl-T Disable bidirectional mode
15664 #ctrl-V Cursor down
15665 #ctrl-Z Clear unprotected data to insert char
15666 #ctrl-^ Cursor home
15669 #ESC lead-in char for multiple character command
15671 #ESC space R execute power on sequence
15672 #ESC ! p1 p2 define scroll region:
15673 # p1 = scroll top line: 20h - 37h
15674 # p1 = scroll bottom line: 20h - 37h
15675 #ESC " unlock keyboard
15676 #ESC # lock keyboard
15677 #ESC $ Semi-graphics mode on
15678 #ESC % Semi-graphics mode off
15679 #ESC & protect mode on
15680 #ESC ' protect mode off
15681 #ESC ( write protect mode off (full intensity)
15682 #ESC ) write protect mode on (half intensity)
15684 #ESC * clear screen
15685 #ESC + clear unprotected data to insert char
15686 #ESC , clear unprotected data to half intensity spaces
15687 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
15688 # p1 = page number 0 - 3
15689 # p2 = row 20h - 7fh
15690 # p3 = column (lo) 20h - 7fh
15691 # p4 = column (hi) 20h - 21h (only 132 col)
15692 #ESC . p1 set cursor style:
15693 # p1 = 0 invisible cursor
15694 # p1 = 1 block blinking cursor
15695 # p1 = 2 block steady cursor
15696 # p1 = 3 underline blinking cursor
15697 # p1 = 4 underline steady cursor
15698 #ESC / transmit cursor location (page, row, column)
15699 #ESC 0 p1 p2 p3 p4 program edit key:
15700 # p1 = edit key code: '@'-'S', '`'-'s'
15701 # p2 p3 p4 = program data (3 bytes)
15704 #ESC 2 clear tab at cursor
15705 #ESC 3 clear all tabs
15706 #ESC 4 send unprotect line to cursor
15707 #ESC 5 send unprotect page to cursor
15708 #ESC 6 send line to cursor
15709 #ESC 7 send page to cursor
15710 #ESC 8 n set scroll mode:
15711 # n = 0 set jump scroll
15712 # n = 1 set smooth scroll
15713 #ESC 9 n control display:
15714 # n = 0 display off
15716 #ESC : clear unprotected data to null
15717 #ESC ; clear unprotected data to insert char
15720 #ESC = p1 p2 address cursor to row, column
15721 # p1 = row 20h - 7fh
15722 # p2 = column (lo) 20h - 7fh
15723 # p3 = column (hi) 20h - 21h (only 132 col)
15724 #ESC > keyclick off
15725 #ESC ? transmit cursor location (row, column)
15727 #ESC @ copy print mode on
15728 #ESC A copy print mode off
15729 #ESC B block mode on
15730 #ESC C block mode off (conversation mode)
15731 #ESC D F set full duplex
15732 #ESC D H set half duplex
15734 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
15735 # 0 = black, 1 = red, 2 = green, 3 = yellow
15736 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
15737 #ESC G n set serial field attribute (n = 30h - 3Fh)
15738 #ESC H n full graphics mode:
15739 # n = 0 exit full graphics mode
15740 # n = 1 enter full graphics mode
15743 #ESC K forward page
15745 #ESC L unformatted page print
15746 #ESC M L move window left (132 col mode only)
15747 #ESC M R move window right (132 col mode only)
15748 #ESC N set page edit (clear line edit)
15749 #ESC O set line edit (clear page edit)
15750 #ESC P formatted page print
15751 #ESC Q character insert
15753 #ESC S send message unprotected only
15754 #ESC T erase line to insert char
15755 #ESC U set monitor mode (see ESC X, ESC u)
15757 #ESC V n select video attribute mode:
15758 # n = 0 serial field attribute mode
15759 # n = 1 parallel character attribute mode
15760 #ESC V 2 n define line attribute:
15761 # n = 0 single width single height
15762 # n = 1 single width double height
15763 # n = 2 double width single height
15764 # n = 3 double width double height
15765 #ESC V 3 n select character font:
15766 # n = 0 system font
15767 # n = 1 user defined font
15768 #ESC V 4 n select screen mode:
15769 # n = 0 page screen mode
15770 # n = 1 virtual screen mode
15771 #ESC V 5 n control mouse mode:
15772 # n = 0 disable mouse
15773 # n = 1 enable sample mode
15774 # n = 2 send mouse information
15775 # n = 3 enable request mode
15776 #ESC W character delete
15777 #ESC X clear monitor mode (see ESC U, ESC u)
15778 #ESC Y erase page to insert char
15780 #ESC Z n send user/status line:
15781 # n = 0 send user line
15782 # n = 1 send status line
15783 # n = 2 send terminal ID
15784 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
15788 # 3 = blink blank (= blank)
15790 # 5 = reverse blank
15791 # 6 = reverse blink
15792 # 7 = reverse blink blank (= reverse blank)
15794 # 9 = underline blank
15795 # : = underline blink
15796 # ; = underline blink blank
15797 # < = reverse underline
15798 # = = reverse underline blank
15799 # > = reverse underline blink
15800 # ? = reverse underline blink blank
15801 # p2, p3: f/grnd, b/grnd colour
15802 # (see ESC F for colours)
15803 # use ZZ for mono, eg.
15804 # ESC [ 0 Z Z for normal
15805 # ESC [ 4 Z Z for inverse etc.
15807 #ESC \ n set page size:
15808 # n = 1 24 lines/page
15809 # n = 2 48 lines/page
15810 # n = 3 72 lines/page
15811 # n = 4 96 lines/page
15812 #ESC ] n set Wordstar mode:
15813 # n = 0 normal (KDS7372) mode
15814 # n = 1 Wordstar mode
15816 #ESC b set foreground colour screen
15818 #ESC c n enter self-test mode:
15819 # n = 0 exit self test mode
15823 # n = 4 screen display test
15824 # n = 5 main/printer port test
15825 # n = 6 mouse port test
15826 # n = 7 graphics board test
15827 # n = 8 graphics memory test
15828 # n = 9 display all 'E'
15829 # n = : display all 'H'
15830 #ESC d set background colour screen
15832 #ESC e n program insert char (n = insert char)
15833 #ESC f text CR load user status line with 'text'
15835 #ESC g display user status line on 25th line
15836 #ESC h display system status line on 25th line
15838 #ESC j reverse linefeed
15839 #ESC k n duplex/local edit mode:
15840 # n = 0 duplex edit mode
15841 # n = 1 local edit mode
15842 #ESC l n select virtual screen:
15845 #ESC m save current config to NVRAM
15846 #ESC n p1 select display screen:
15851 #ESC o p1 p2 set characters/line and attribute:
15852 # p1 = 0 80 chars/line
15854 #ESC o p1 p2 set characters/line and attribute:
15855 # p1 = 0 80 chars/line
15856 # p1 = 1 132 chars/line
15857 # p2 = 0 single width single height
15858 # p2 = 1 single width double height
15859 # p2 = 2 double width single height
15860 # p2 = 3 double width double height
15862 #ESC q insert mode on
15863 #ESC r edit mode on
15864 #ESC s send message all
15865 #ESC t erase line to null
15866 #ESC u clear monitor mode (see ESC U, ESC X)
15867 #ESC v autopage mode on
15868 #ESC w autopage mode off
15869 #ESC x p1 p2 p3 define delimiter code...
15870 #ESC y erase page to null
15872 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
15873 # p1 = starting row
15874 # p2 = starting column
15878 #ESC { p1 p2 p3 p4 configure main port
15879 # (baud, stop bits, parity, word length)
15881 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
15882 # p1 = function key code:
15883 # '1' - ';' normal f1- f11
15884 # '<' - 'F' shifted f1 - f11
15885 # p2 = program mode:
15889 # Ctrl-Y = terminator
15890 # (use Ctrl-P to escape ^P, ^Y )
15892 #ESC } p1 p2 p3 p4 configure printer port
15893 # (baud, stop bits, parity, word length)
15894 #ESC ~ send system status
15896 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
15898 # Entry is by esr going solely on above information and is UNTESTED.
15899 # This actually looks a lot like a Televideo 9xx.
15900 # This entry uses page 0 and is monochrome; I'm not brave enough to try
15901 # to make color work without a test terminal. The <am> capability is a guess.
15902 # The initialization string sets conversation mode, blinking underline cursor,
15903 # full duplex, parallel attribute mode, display user status line, white
15904 # foreground, black background, normal highlight.
15906 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
15909 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
15911 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
15912 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
15913 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
15914 hts=\E1, il1=\EE, invis=\E[1ZZ,
15915 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
15916 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
15917 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
15918 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?%p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
15919 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
15920 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
15921 rs2=\Eo1, use=icl6404,
15923 #### Interactive Systems Corp
15925 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
15926 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
15927 # bought out by Sun.
15930 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
15931 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
15932 # ":le=^_:" later overridden -- esr)
15933 intext|Interactive Systems Corporation modified owl 1200,
15935 cols#80, it#8, lines#24, xmc#1,
15936 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
15937 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
15938 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
15939 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
15940 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
15941 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
15942 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
15943 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
15945 intext2|intextii|INTERACTIVE modified owl 1251,
15947 cols#80, lines#24, xmc#0,
15948 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D,
15949 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
15950 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
15951 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
15952 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
15953 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
15954 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
15955 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
15956 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
15957 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
15958 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
15961 #### Kimtron (abm, kt)
15963 # Kimtron seems to be history, but as March 1998 these people are still
15964 # offering repair services for Kimtron equipment:
15966 # Com/Pair Monitor Service
15967 # 1105 N. Cliff Ave.
15968 # Sioux Falls, South Dakota 57103
15970 # WATS voice: 1-800/398-4946
15971 # POTS fax: +1 605/338-8709
15972 # POTS voice: +1 605/338-9650
15973 # Email: <compair@sd.cybernex.net>
15974 # Internet/Web: <http://www.com-pair.com>
15976 # Kimtron entries include (undocumented) codes for: enter dim mode,
15977 # enter bold mode, enter reverse mode, turn off all attributes.
15980 # Kimtron ABM 85 added by Dual Systems
15981 # (abm85: removed duplicated ":kd=^J:" -- esr)
15982 abm85|Kimtron ABM 85,
15983 OTbs, am, bw, msgr,
15984 cols#80, it#8, lines#24, xmc#1,
15985 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
15986 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15987 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
15988 if=/usr/share/tabset/stdcrt, il1=\EE,
15989 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
15990 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
15991 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
15992 # Kimtron ABM 85H added by Dual Systems.
15993 # Some notes about the abm85h entries:
15994 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
15995 # firmware revs prior to SP51
15996 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
15997 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
15998 # in some places and NOT software settable i.e., <is2> can't fix it)
15999 # 3) In 85h mode, the arrow keys and special functions transmit when
16000 # the terminal is in dup-edit, and work only locally in local-edit.
16001 # Vi won't swallow `del char' for instance, but <smcup> turns on
16002 # dup-edit anyway so that the arrow keys will work right. If the
16003 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
16004 # <is2>. Note that 920E mode does not have software commands to toggle
16005 # between dup and local edit, so you get whatever was set last on the
16007 # 4) <flash> attribute is nice, but seems too slow to work correctly
16009 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
16010 # are selected, the <xmc@> entry should be removed.
16011 # 6) auto new-line should be on (selectable from setup mode only)
16013 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
16014 abm85h|Kimtron ABM 85H native mode,
16017 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
16019 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
16020 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
16022 abm85e|Kimtron ABM 85H in 920E mode,
16024 bel=^G, dim=\E), flash@,
16025 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
16026 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
16027 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
16030 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
16031 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
16032 # From: <malman@bbn-vax.arpa>
16033 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
16034 kt7|kimtron model kt-7,
16036 cols#80, it#8, lines#24,
16037 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
16038 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16039 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
16040 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
16041 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
16042 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
16043 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16044 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16045 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
16046 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
16047 # other kt7 entry and the adjacent key capabilities). Removed EE which is
16048 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
16049 # but we can't figure out what.
16050 kt7ix|kimtron model kt-7 or 70 in IX mode,
16052 cols#80, it#8, lines#25,
16053 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
16054 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
16055 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16056 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
16057 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
16058 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
16059 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
16060 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
16061 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16062 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
16063 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
16064 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
16066 #### Microdata/MDIS
16068 # This was a line of terminals made by McDonnell-Douglas Information Systems.
16069 # These entries come direct from MDIS documentation. I have edited them only
16070 # to move primary names of the form p[0-9] * to aliases, and to comment out
16071 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
16072 # also removed the change history; the last version indicates this is
16073 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
16076 # McDonnell Information Systems Terminal Family History
16077 # =========================================
16079 # Prism-1, Prism-2 and P99:
16080 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
16082 # Prism-4 and Prism-5:
16083 # Slightly less ancient range of Microdata terminals. Follow-on from
16084 # Prism-2, but with many enhancements. P5 has eight display pages.
16087 # A special terminal for use with library systems, primarily in Germany.
16088 # Limited numbers. Similar functionality to P5 (except attributes?).
16090 # Prism-7, Prism-8 and Prism-9:
16091 # More recent range of MDIS terminals, in which P7 and P8
16092 # replace the P4 & P5, with added functionality, and P9 is the flagship.
16093 # The P9 has two emulation modes - P8 and ANSI - and includes a
16094 # large number of the DEC VT220 control sequences. Both
16095 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
16097 # Prism-12 and Prism-14:
16098 # Latest range, functionally very similar to the P9. The P14 has a
16099 # black-on-white overscanning screen.
16101 # The terminfo definitions given here are:
16103 # p2 - Prism-2 (or Prism-1 or P99).
16105 # p4 - Prism-4 (and older P7s & P8s).
16106 # p5 - Prism-5 (or Prism-6).
16109 # p8 - Prism-8 (in national or multinational mode).
16110 # p8-w - 132 column version of p8.
16111 # p9 - Prism-9 in ANSI mode.
16112 # p9-w - 132 column version of p9.
16113 # p9-8 - Prism-9 in Prism-8 emulation mode.
16114 # p9-8-w - As p9-8, but with 132 columns.
16116 # p12 - Prism-12 in ANSI mode.
16117 # p12-w - 132 column version of p12.
16118 # p12-m - Prism-12 in MDC emulation mode.
16119 # p12-m-w - As p12-m, but with 132 columns.
16120 # p14 - Prism-14 in ANSI mode.
16121 # p14-w - 132 column version of p14.
16122 # p14-m - Prism-14 in MDC emulation mode.
16123 # p14-m-w - As p14-m, but with 132 columns.
16128 # Includes Prism-1 and basic P99 without SP or MP loaded.
16129 # The simplest form of Prism-type terminal.
16130 # Basic cursor movement and clearing operations only.
16131 # No video attributes.
16133 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
16134 # value up, followed by backspace.
16136 prism2|MDC Prism-2,
16139 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
16140 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16141 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
16142 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16143 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
16148 # Includes early versions of P7 & P8.
16149 # Basic family definition for most Prisms (except P2 and P9 ANSI).
16151 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
16152 # value up, followed by backspace.
16153 # Cursor key definitions removed because they interfere with vi and csh keys.
16155 prism4|p4|P4|MDC Prism-4,
16156 am, bw, hs, mc5i, msgr,
16157 cols#80, lines#24, wsl#72, xmc#1,
16158 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
16159 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
16160 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16161 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
16162 fsl=^]\345, home=^A,
16163 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16164 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
16165 rev=^CD, rmso=^C\s, rmul=^C\s,
16166 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
16167 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
16168 vpa=\013%p1%{32}%+%c,
16173 # Same definition as p4. Includes Prism-6 (not tested!).
16174 # Does not use any multi-page features.
16176 prism5|p5|P5|MDC Prism-5,
16182 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
16184 # Use p4 for very early models of P7.
16185 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16187 prism7|p7|P7|MDC Prism-7,
16188 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
16193 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
16194 # Supports national and multinational character sets.
16196 # Alternate char set operations only work in multinational mode.
16197 # Use p4 for very early models of P8.
16198 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16199 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
16201 prism8|p8|P8|MDC Prism-8,
16202 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
16203 vpa=\E[%i%p1%dd, use=p4,
16205 # p8-w: Prism-8 in 132 column mode
16206 # --------------------------------
16208 # 'Wide' version of p8.
16210 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16212 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
16214 is2=\E[<12h\E[<14h, use=p8,
16216 # p9: Prism-9 in ANSI mode
16217 # -------------------------
16219 # The "flagship" model of this generation of terminals.
16220 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
16222 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
16223 # Fixes to deal with terminal firmware bugs:
16224 # . 'ri' uses insert-line since rev index doesn't always
16225 # . 'sgr0' has extra '0' since esc[m fails
16226 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
16227 # Not covered in the current definition:
16229 # . Programming Fn keys
16230 # . Graphic characters (defaults correctly to vt100)
16231 # . Padding values (sets xon)
16232 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
16234 prism9|p9|P9|MDC Prism-9 in ANSII mode,
16235 am, bw, hs, msgr, xenl, xon,
16236 cols#80, it#8, lines#24, vt#3, wsl#72,
16237 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
16238 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
16239 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16240 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16241 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16242 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
16243 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
16244 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
16245 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
16246 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
16247 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
16248 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
16249 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
16250 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
16251 khome=\E[H, nel=^M^J, prot=\E[32%{, rc=\E[%z,
16252 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
16253 rmso=\E[27m, rmul=\E[24m,
16254 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
16256 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?%p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
16257 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16258 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
16261 # p9-w: Prism-9 in 132 column mode
16262 # --------------------------------
16264 # 'Wide' version of p9.
16266 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
16268 is2=\E[&p\E[<12l\E F\E[<14h,
16269 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
16271 # p9-8: Prism-9 in P8 mode
16272 # ------------------------
16274 # P9 terminal in P8 emulation mode.
16275 # Similar to p8 definition.
16276 # Insertion and deletion operations possible.
16278 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
16279 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16280 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
16282 # p9-8-w: Prism-9 in P8 and 132 column modes
16283 # ------------------------------------------
16285 # P9 terminal in P8 emulation mode and 132 column mode.
16287 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
16288 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16289 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
16291 # p12: Prism-12 in ANSI mode
16292 # ---------------------------
16294 # See p9 definition.
16296 prism12|p12|P12|MDC Prism-12 in ANSI mode,
16299 # p12-w: Prism-12 in 132 column mode
16300 # ----------------------------------
16302 # 'Wide' version of p12.
16304 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
16307 # p12-m: Prism-12 in MDC emulation mode
16308 # -------------------------------------
16310 # P12 terminal in MDC emulation mode.
16311 # Similar to p8 definition.
16312 # Insertion and deletion operations possible.
16314 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
16317 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
16318 # -------------------------------------------------------
16320 # P12 terminal in MDC emulation mode and 132 column mode.
16322 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
16325 # p14: Prism-14 in ANSII mode
16326 # ---------------------------
16328 # See p9 definition.
16330 prism14|p14|P14|MDC Prism-14 in ANSII mode,
16333 # p14-w: Prism-14 in 132 column mode
16334 # ----------------------------------
16336 # 'Wide' version of p14.
16338 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
16341 # p14-m: Prism-14 in MDC emulation mode
16342 # -------------------------------------
16344 # P14 terminal in MDC emulation mode.
16345 # Similar to p8 definition.
16346 # Insertion and deletion operations possible.
16348 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
16351 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
16352 # -------------------------------------------------------
16354 # P14 terminal in MDC emulation mode and 132 column mode.
16356 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
16359 # End of McDonnell Information Systems Prism definitions
16361 # These things were popular in the Pick database community at one time
16362 # From: George Land <georgeland@aol.com> 24 Sep 1996
16363 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
16365 cols#80, lines#24, ma#1, wsl#78, xmc#1,
16366 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
16367 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
16368 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
16369 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
16370 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
16371 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
16372 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16373 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
16374 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
16375 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
16378 #### Microterm (act, mime)
16380 # The mime1 entries refer to the Microterm Mime I or Mime II.
16381 # The default mime is assumed to be in enhanced act iv mode.
16384 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
16385 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
16386 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
16387 # since Sytek insists ^S means xoff.
16388 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
16389 act4|microterm|microterm act iv,
16392 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
16393 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
16394 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
16395 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
16396 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
16398 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
16399 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
16400 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
16401 act5|microterm5|microterm act v,
16402 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
16404 # Mimes using brightness for standout. Half bright is really dim unless
16405 # you turn up the brightness so far that lines show up on the screen.
16406 mime-fb|full bright mime1,
16407 is2=^S\E, rmso=^S, smso=^Y, use=mime,
16408 mime-hb|half bright mime1,
16409 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
16410 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
16411 # the more plausible ":do=^J:" -- esr)
16412 # uc was at one time disabled to get around a curses bug, be wary of it
16413 mime|mime1|mime2|mimei|mimeii|microterm mime1,
16415 cols#80, it#8, lines#24, vt#9,
16416 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
16417 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
16418 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
16419 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
16420 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
16421 # These termcaps (for mime2a) put the terminal in low intensity mode
16422 # since high intensity mode is so obnoxious.
16423 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
16426 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16427 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
16428 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
16429 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
16430 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
16431 smir=\EE, smso=\E\:, smul=\E6,
16432 # This is the preferred mode (but ^X can't be used as a kill character)
16433 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
16435 cols#80, it#8, lines#24,
16436 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16437 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
16438 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
16439 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
16440 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
16441 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
16442 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
16443 mime3a|mime1 emulating 3a,
16445 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
16446 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
16448 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
16450 # Wed Mar 9 18:53:21 1983
16451 # We run our terminals at 2400 baud, so there might be some timing problems at
16452 # higher speeds. The major improvements in this model are the terminal now
16453 # scrolls down and insert mode works without redrawing the rest of the line
16454 # to the right of the cursor. This is done with a bit of a kludge using the
16455 # exit graphics mode to get out of insert, but it does not appear to hurt
16456 # anything when using vi at least. If you have some users using act4s with
16457 # programs that use curses and graphics mode this could be a problem.
16458 mime314|mm314|mime 314,
16461 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
16462 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
16463 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
16464 # Microterm mime 340 from University of Wisconsin
16465 mm340|mime340|mime 340,
16467 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16468 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16469 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
16470 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
16471 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
16472 # This came from University of Wisconsin marked "astro termcap for jooss".
16473 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
16474 # also added <rmam>/<smam> based on the init string -- esr)
16475 mt4520-rv|micro-term 4520 reverse video,
16476 am, hs, msgr, xenl, xon,
16477 cols#80, it#8, lines#24, wsl#80,
16478 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
16479 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
16480 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
16481 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
16482 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
16483 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
16484 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
16485 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
16486 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
16487 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16488 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
16489 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
16490 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
16491 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
16492 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
16493 tbc=\E[g, tsl=\E[25;1H,
16495 # Fri Aug 5 08:11:57 1983
16496 # This entry works for the ergo 4000 with the following setups:
16497 # ansi,wraparound,newline disabled, xon/xoff disabled in both
16500 # WARNING!!! There are multiple versions of ERGO 4000 microcode
16501 # Be advised that very early versions DO NOT WORK RIGHT !!
16502 # Microterm does have a ROM exchange program- use it or lose big
16503 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
16504 ergo4000|microterm ergo 4000,
16507 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
16508 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16509 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
16510 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
16511 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
16512 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
16513 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
16514 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
16515 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
16516 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
16521 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
16522 # For what happened to that group, see the ADDS section.
16524 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
16527 # The following vendor-supplied termcaps were captured from the Boundless
16528 # Technologies site, 8 March 1998. I removed all-upper-case names that were
16529 # identical, except for case, to lower-case ones. I also uncommented the acsc
16532 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
16533 # DEC vt200/300 with color capabilities added.
16534 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
16535 colors#8, pairs#64,
16536 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16538 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
16539 # DEC vt200/300 with color capabilities added.
16540 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
16541 colors#8, pairs#64,
16542 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16543 use=ncr260vt300wan,
16544 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
16545 # DEC vt200/300 with color capabilities added.
16546 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
16547 colors#8, pairs#64,
16548 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16550 # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
16551 # DEC vt200/300 with color capabilities added.
16552 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
16553 colors#8, pairs#64,
16554 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
16555 use=ncr260vt300wpp,
16556 # This definition for ViewPoint supports several attributes. This means
16557 # that it has magic cookies (extra spaces where the attributes begin).
16558 # Some applications do not function well with magic cookies. The System
16559 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
16560 # If supporting various attributes is not vital, 'xmc#1' and the extra
16561 # attributes can be removed.
16562 # Mapping to ASCII character set ('acsc' capability) can also be
16563 # restored if needed.
16564 ncr260vppp|NCR 2900_260 viewpoint,
16565 am, bw, hs, km, mc5i, mir, msgr, xon,
16566 cols#80, lines#24, nlab#32, xmc#1,
16567 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16568 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
16569 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
16570 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
16571 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
16572 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
16573 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
16574 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16575 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
16576 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
16577 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
16578 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
16579 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
16580 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
16581 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
16582 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
16583 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
16584 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
16585 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
16586 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
16587 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
16588 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16589 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16590 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
16591 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
16592 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
16594 cup=\Ea%i%p1%dR%p2%dC$<30>,
16595 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16596 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
16598 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
16599 am, hs, mir, msgr, xenl, xon,
16600 cols#80, lines#24, nlab#32,
16601 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16602 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16603 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
16604 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
16605 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
16606 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
16607 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
16608 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
16609 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
16610 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
16611 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
16612 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
16613 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
16615 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16616 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16617 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
16618 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
16619 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
16620 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
16621 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16623 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
16624 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
16625 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
16626 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
16627 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
16629 cup=\E[%i%p1%d;%p2%dH$<30>,
16630 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16631 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16633 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
16634 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16635 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
16636 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
16637 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
16638 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
16639 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16640 smkx=\E=, use=ncr260vt100an,
16641 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
16643 cup=\E[%i%p1%d;%p2%dH$<30>,
16644 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16645 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16647 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
16648 am, hs, mir, msgr, xenl, xon,
16649 cols#80, lines#24, nlab#32,
16650 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16651 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16652 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
16653 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
16654 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
16655 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
16656 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
16657 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
16658 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
16659 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
16660 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
16661 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
16662 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
16663 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16664 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16665 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
16666 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
16667 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
16668 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
16669 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
16670 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
16671 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
16672 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
16673 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
16674 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
16675 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
16676 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
16677 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
16678 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16680 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
16681 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
16682 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16683 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
16685 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
16687 cup=\E[%i%p1%d;%p2%dH$<30>,
16688 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
16689 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
16691 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
16692 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
16693 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
16694 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
16695 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
16697 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
16699 cup=\E[%i%p1%d;%p2%dH$<30>,
16700 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16701 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16703 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
16704 am, hs, mir, msgr, xenl, xon,
16705 cols#80, lines#24, nlab#32,
16706 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
16707 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16708 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
16709 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
16710 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
16711 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
16712 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
16713 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
16714 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
16715 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
16716 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
16717 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
16718 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
16719 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16720 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
16721 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
16722 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
16723 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
16724 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
16725 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
16726 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
16727 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
16728 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
16729 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
16730 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
16731 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
16732 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
16734 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16736 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
16737 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
16738 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16739 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
16741 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
16743 cup=\E[%i%p1%d;%p2%dH$<30>,
16744 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
16745 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
16747 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
16748 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
16749 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
16750 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
16751 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
16753 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
16755 cup=\E[%i%p1%d;%p2%dH$<30>,
16756 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16757 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
16759 # This terminfo file contains color capabilities for the Wyse325 emulation of
16760 # the NCR 2900/260C color terminal. Because of the structure of the command
16761 # (escape sequence) used to set color attributes, one of the fore/background
16762 # colors must be preset to a given value. I have set the background color to
16763 # black. The user can change this setup by altering the last section of the
16764 # 'setf' definition. The escape sequence to set color attributes is
16765 # ESC d y <foreground_color> <background_color> 1
16766 # In addition, the background color can be changed through the desk accessories.
16767 # The capablitiy 'op' sets colors to green on black (default combination).
16769 # NOTE: The NCR Unix System Administrator's Shell will not function properly
16770 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
16771 # capability and recompile if you wish to have it included.
16773 ncr260wy325pp|NCR 2900_260 wyse 325,
16774 am, bw, hs, km, mc5i, mir, msgr, xon,
16775 colors#16, cols#80, lines#24, ncv#33, nlab#32,
16776 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16777 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
16778 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16779 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
16780 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
16781 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
16782 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
16783 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16784 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
16785 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
16786 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
16787 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
16788 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
16789 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
16790 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
16791 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
16792 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16793 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
16794 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
16795 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
16796 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
16797 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16798 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16800 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
16801 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
16802 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
16804 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
16806 cup=\Ea%i%p1%dR%p2%dC$<30>,
16807 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16808 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16810 # This definition for Wyse 350 supports several attributes. This means
16811 # that it has magic cookies (extra spaces where the attributes begin).
16812 # Some applications do not function well with magic cookies. The System
16813 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
16814 # If supporting various attributes is not vital, 'xmc#1' and the extra
16815 # attributes can be removed.
16816 # Mapping to ASCII character set ('acsc' capability) can also be
16817 # restored if needed.
16818 # In addition, color capabilities have been added to this file. The drawback,
16819 # however, is that the background color has to be black. The foreground colors
16820 # are numbered 0 through 15.
16822 # NOTE: The NCR Unix System Administrator's Shell does not function properly
16823 # with the 'pairs' capability defined as below. If you wish to
16824 # have it included, Un-comment it and recompile (using 'tic').
16826 ncr260wy350pp|NCR 2900_260 wyse 350,
16827 am, bw, hs, km, mc5i, mir, msgr, xon,
16828 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
16829 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16830 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
16831 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16832 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
16833 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
16834 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
16835 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
16836 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16837 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
16838 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
16839 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
16840 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
16841 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
16842 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
16843 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
16844 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
16845 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
16846 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
16847 mc0=\EP$<10>, mc4=^T, mc5=^R,
16848 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
16849 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
16850 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16851 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16853 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
16854 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
16855 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
16857 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
16859 cup=\Ea%i%p1%dR%p2%dC$<30>,
16860 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16861 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16863 # This definition for Wyse 50+ supports several attributes. This means
16864 # that it has magic cookies (extra spaces where the attributes begin).
16865 # Some applications do not function well with magic cookies. The System
16866 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
16867 # If supporting various attributes is not vital, 'xmc#1' and the extra
16868 # attributes can be removed.
16869 # Mapping to ASCII character set ('acsc' capability) can also be
16870 # restored if needed.
16871 # (ncr260wy50+pp: originally contained commented-out
16872 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
16873 ncr260wy50+pp|NCR 2900_260 wyse 50+,
16874 am, bw, hs, km, mc5i, mir, msgr, xon,
16875 cols#80, lines#24, nlab#32, xmc#1,
16876 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
16877 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
16878 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16879 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
16880 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
16881 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
16882 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
16884 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16885 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
16886 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
16887 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
16888 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
16889 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
16890 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
16891 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
16892 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
16893 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
16894 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
16895 mc0=\EP$<10>, mc4=^T, mc5=^R,
16896 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
16897 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
16898 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16899 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16900 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
16901 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
16902 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
16904 cup=\Ea%i%p1%dR%p2%dC$<30>,
16905 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16906 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
16908 ncr260wy60pp|NCR 2900_260 wyse 60,
16909 am, bw, hs, km, mc5i, mir, msgr, xon,
16910 cols#80, lines#24, nlab#32,
16911 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
16912 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
16913 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
16914 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
16915 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
16916 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
16917 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
16919 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16920 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
16921 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
16922 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
16923 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
16924 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
16925 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
16926 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
16927 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
16928 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
16929 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16930 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
16931 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
16932 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
16933 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
16934 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16935 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
16936 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
16938 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
16940 cup=\Ea%i%p1%dR%p2%dC$<30>,
16941 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16942 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
16944 ncr160vppp|NCR 2900_160 viewpoint,
16946 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
16948 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
16950 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
16952 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
16953 use=ncr260vt100wan,
16954 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
16955 use=ncr260vt100wpp,
16956 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
16958 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
16960 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
16961 use=ncr260vt200wan,
16962 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
16963 use=ncr260vt200wpp,
16964 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
16966 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
16968 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
16969 use=ncr260vt300wan,
16970 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
16971 use=ncr260vt300wpp,
16972 ncr160wy50+pp|NCR 2900_160 wyse 50+,
16974 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
16975 use=ncr260wy50+wpp,
16976 ncr160wy60pp|NCR 2900_160 wyse 60,
16978 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
16980 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
16981 am, hs, mc5i, mir, msgr, xon,
16982 cols#80, it#8, lines#24, nlab#32,
16983 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
16984 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
16985 clear=\E[2J\E[1;1H$<300>, cr=^M,
16986 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
16987 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
16988 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
16989 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
16990 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
16991 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
16992 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
16993 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
16994 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
16996 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
16997 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
16998 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
16999 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
17000 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
17001 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
17002 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
17004 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
17005 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
17006 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
17008 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
17010 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
17011 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
17014 # Vendor-supplied NCR termcaps end here
17016 # NCR7900 DIP switches:
17020 # 5 - Parity (Odd/Even)
17021 # 6 - Don't Send or Do Send Spaces
17022 # 7 - Parity Enable
17023 # 8 - Stop Bits (One/Two)
17026 # 1 - Upper/Lower Shift
17027 # 2 - Typewriter Shift
17028 # 3 - Half Duplex / Full Duplex
17029 # 4 - Light/Dark Background
17030 # 5-6 - Carriage Return Without / With Line Feed
17031 # 7 - Extended Mode
17032 # 8 - Suppress Keyboard Display
17035 # 1 - End of line entry disabled/enabled
17036 # 2 - Conversational mode / (Local?) Mode
17037 # 3 - Control characters displayed / not displayed
17038 # 4 - (2-wire?) / 4-wire communications
17039 # 5 - RTS on and off for each character
17040 # 6 - (50Hz?) / 60 Hz
17041 # 7 - Exit after level zero diagnostics
17042 # 8 - RS-232 interface
17045 # 1 - Reverse Channel (yes / no)
17046 # 2 - Manual answer (no / yes)
17047 # 3-4 - Cursor appearance
17048 # 5 - Communication Rate
17049 # 6 - Enable / Disable EXT turnoff
17050 # 7 - Enable / Disable CR turnoff
17051 # 8 - Enable / Disable backspace
17053 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
17054 # reverse, blink, dim, and underline) the appropriate number of bits (by
17055 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
17056 # '@' is (effectively) "or"ed with each attribute to generate the proper third
17057 # character in the <ESC>0 sequence. The <sgr> string implements the following
17060 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
17061 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
17063 # Where: P1 <==> Standout attribute parameter
17064 # P2 <==> Underline attribute parameter
17065 # P3 <==> Reverse attribute parameter
17066 # P4 <==> Blink attribute parameter
17067 # P5 <==> Dim attribute parameter
17068 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
17069 ncr7900i|ncr7900|ncr 7900 model 1,
17071 cols#80, lines#24, xmc#1,
17072 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
17073 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
17074 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
17075 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
17077 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
17078 sgr0=\E0@, smso=\E0Q, smul=\E0`,
17079 ncr7900iv|ncr 7900 model 4,
17082 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
17083 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
17084 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
17085 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
17086 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
17087 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
17088 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
17089 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
17090 # The user can enter a CTRL-B to get out of this locked state.
17091 # In <hpa>, we want to output the character given by the formula:
17092 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
17093 ncr7901|ncr 7901 model,
17096 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
17097 cub1=^H, cud1=^J, cuf1=^F,
17098 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
17100 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
17101 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
17102 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
17103 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
17104 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
17105 vpa=\013%p1%{64}%+%c,
17107 # Newbury Data Recording Limited (Newbury Data)
17109 # Have been manufacturing and reselling various peripherals for a long time
17110 # They don't make terminals anymore, but are still in business (in 2007).
17111 # Their e-mail address is at ndsales@newburydata.co.uk
17112 # and their post address is:
17114 # Newbury Data Recording Ltd,
17115 # Premier Park, Road One,
17116 # Winsford, Cheshire, CW7 3PT
17118 # Their technical support is still good, they sent me for free a printed copy
17119 # of the 9500 user manual and I got it just 1 week after I first contacted them
17123 # Manufactured in the early/mid eighties, behaves almost the same as a
17124 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
17125 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
17126 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
17127 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
17128 # recognized: if you type in "ESC !", the next (third) character is not
17129 # echoed, showing that the terminal was actually waiting for a parameter!
17130 ndr9500|nd9500|Newbury Data 9500,
17131 am, bw, hs, mc5i, mir, msgr, ul, xon,
17132 cols#80, lines#24, wsl#79,
17133 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
17134 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
17135 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17136 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
17137 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
17138 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
17139 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
17140 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
17141 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
17142 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
17143 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
17144 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
17145 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
17146 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
17147 pfloc=\E|%{48}%p1%+%c2%p2\031,
17148 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
17149 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
17150 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
17151 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
17152 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
17154 ndr9500-nl|NDR 9500 with no status line,
17157 dsl@, fsl@, tsl@, use=ndr9500,
17159 ndr9500-25|NDR 9500 with 25th line enabled,
17160 lines#25, use=ndr9500,
17162 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
17163 lines#25, use=ndr9500-nl,
17165 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
17168 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
17169 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
17170 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
17172 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
17173 lines#25, use=ndr9500-mc,
17175 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
17178 dsl@, fsl@, tsl@, use=ndr9500-mc,
17180 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
17181 lines#25, use=ndr9500-mc-nl,
17183 #### Perkin-Elmer (Owl)
17185 # These are official terminfo entries from within Perkin-Elmer.
17188 bantam|pe550|pe6100|perkin elmer 550,
17191 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
17192 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17193 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
17194 fox|pe1100|perkin elmer 1100,
17197 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
17198 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17199 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
17200 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
17201 owl|pe1200|perkin elmer 1200,
17204 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
17205 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17206 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
17207 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
17208 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
17209 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
17210 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
17211 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
17212 pe1251|pe6300|pe6312|perkin elmer 1251,
17214 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
17215 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
17216 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17217 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
17218 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
17219 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
17220 # (pe7000m: this had
17221 # rmul=\E!\0, smul=\E!\040,
17222 # which is probably wrong, it collides with kf0
17223 pe7000m|perkin elmer 7000 series monochrome monitor,
17226 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
17227 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
17228 ed=\EJ, el=\EI, home=\EH, ind=^J,
17229 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
17230 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
17231 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
17232 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
17234 pe7000c|perkin elmer 7000 series colour monitor,
17235 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
17236 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
17240 # Sperry Univac has merged with Burroughs to form Unisys.
17243 # This entry is for the Sperry UTS30 terminal running the TTY
17244 # utility under control of CP/M Plus 1R1. The functionality
17245 # provided is comparable to the DEC vt100.
17246 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
17247 uts30|sperry uts30 with cp/m@1R1,
17249 cols#80, lines#24, wsl#40,
17250 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17251 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
17252 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
17253 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
17254 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17255 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
17256 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
17257 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
17258 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
17259 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
17260 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
17261 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
17262 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17263 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
17264 smul=\E[4m, tsl=\E], uc=\EPB,
17268 # Tandem builds these things for use with its line of fault-tolerant
17269 # transaction-processing computers. They aren't generally available
17270 # on the merchant market, and so are fairly uncommon.
17273 tandem6510|adm3a repackaged by Tandem,
17276 # A funny series of terminal that TANDEM uses. The actual model numbers
17277 # have a fourth digit after 653 that designates minor variants. These are
17278 # natively block-mode and rather ugly, but they have a character mode which
17279 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
17280 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
17281 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
17282 tandem653|t653x|Tandem 653x multipage terminal,
17283 OTbs, am, da, db, hs,
17284 cols#80, lines#24, wsl#64, xmc#1,
17285 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
17286 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
17287 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
17288 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
17290 #### Tandy/Radio Shack
17292 # Tandy has a line of VDTs distinct from its microcomputers.
17295 dmterm|deskmate terminal,
17298 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
17299 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17300 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
17301 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
17302 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
17303 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
17304 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
17305 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
17307 dt100|dt-100|Tandy DT-100 terminal,
17309 cols#80, lines#24, xmc#1,
17310 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
17311 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
17312 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
17313 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
17314 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
17315 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
17316 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
17317 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
17318 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
17319 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
17320 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
17321 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
17322 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
17323 cols#132, use=dt100,
17324 dt110|Tandy DT-110 emulating ansi,
17327 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
17328 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
17329 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
17330 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
17331 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
17332 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
17333 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
17334 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
17335 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
17336 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
17337 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
17338 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
17339 smacs=^N, smso=\E[7m, smul=\E[4m,
17340 pt210|TRS-80 PT-210 printing terminal,
17343 bel=^G, cr=^M, cud1=^J, ind=^J,
17345 #### Tektronix (tek)
17347 # Tektronix tubes are graphics terminals. Most of them use modified
17348 # oscilloscope technology incorporating a long-persistence green phosphor,
17349 # and support vector graphics on a main screen with an attached "dialogue
17350 # area" for interactive text.
17353 tek|tek4012|tektronix 4012,
17356 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
17357 ff=\014$<1000>, is2=\E^O,
17358 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17359 tek4013|tektronix 4013,
17360 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
17361 tek4014|tektronix 4014,
17363 is2=\E\017\E9, use=tek4012,
17364 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17365 tek4015|tektronix 4015,
17366 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
17367 tek4014-sm|tektronix 4014 in small font,
17368 cols#121, lines#58,
17369 is2=\E\017\E\:, use=tek4014,
17370 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
17371 tek4015-sm|tektronix 4015 in small font,
17372 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
17373 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
17375 # You need to have "stty nl2" in effect. Some versions of tset(1) know
17376 # how to set it for you.
17378 # It's got the Magic Cookie problem around stand-out mode. If you can't
17379 # live with Magic Cookie, remove the :so: and :se: fields and do without
17380 # reverse video. If you like reverse video stand-out mode but don't want
17381 # it to flash, change the letter 'H' to 'P' in the :so: field.
17382 tek4023|tektronix 4023,
17384 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
17385 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
17386 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
17387 rmso=^_@, smso=^_P,
17388 # It is recommended that you run the 4025 at 4800 baud or less;
17389 # various bugs in the terminal appear at 9600. It wedges at the
17390 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
17391 # on keyboard don't work. You have to hit BREAK twice to get
17392 # one break at any speed - this is a documented feature.
17393 # Can't use cursor motion because it's memory relative, and
17394 # because it only works in the workspace, not the monitor.
17395 # Same for home. Likewise, standout only works in the workspace.
17397 # <el> was commented out since vi and rogue seem to work better
17398 # simulating it with lots of spaces!
17400 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
17401 # and didn't seem necessary.
17403 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
17405 cols#80, it#8, lines#34, lm#0,
17406 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
17407 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
17408 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
17409 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
17410 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
17411 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
17412 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
17414 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
17415 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
17416 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
17417 tek4025-17|tek 4025 17 line window,
17418 lines#17, use=tek4025,
17419 tek4025-17-ws|tek 4025 17 line window in workspace,
17420 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
17421 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
17422 smso=\037att e\r, use=tek4025-17,
17423 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
17424 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
17425 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
17427 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
17428 # The following status modes are assumed for normal operation (replace the
17429 # initial "!" by whatever the current command character is):
17430 # !COM 29 # NOTE: changes command character to GS (^])
17436 # ^]STO 9 17 25 33 41 49 57 65 73
17437 # Other modes may be set according to communication requirements.
17438 # If the command character is inadvertently changed, termcap can't restore it.
17439 # Insert-character cannot be made to work on both top and bottom rows.
17440 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
17441 # There also seems to be a problem with vertical motion, perhaps involving
17442 # delete/insert-line, following a typed carriage return. This terminal sucks.
17443 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
17444 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
17445 # work any more. -- esr)
17446 tek4025a|Tektronix 4025A,
17447 OTbs, OTpt, am, bw, da, db, xon,
17448 cols#80, it#8, lines#34,
17449 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
17450 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
17451 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
17452 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
17453 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
17454 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
17455 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
17456 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
17458 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
17459 # Here's the command file that I use to get rogue to work on the 4025.
17460 # It should work with any program using the old curses (e.g. it better
17461 # not try to scroll, or cursor addressing won't work. Also, you can't
17463 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
17464 tek4025-cr|tek 4025 for curses and rogue,
17466 cols#80, it#8, lines#33,
17467 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
17468 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
17469 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
17470 rmcup=\037wor 0, smcup=\037wor 33h,
17471 # next two lines commented out since curses only allows 128 chars, sigh.
17472 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
17473 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
17474 tek4025ex|4025ex|4027ex|tek 4025 w/!,
17475 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
17476 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
17477 tek4105|tektronix 4105,
17478 OTbs, am, mir, msgr, ul, xenl, xt,
17479 cols#79, it#8, lines#29,
17480 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
17481 clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
17482 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
17483 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
17484 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
17485 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
17486 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
17487 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
17488 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
17489 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
17490 smul=\E[=5;<2m, tbc=\E[1g,
17492 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
17493 tek4105-30|4015 emulating 30 line vt100,
17494 am, mir, msgr, xenl, xon,
17495 cols#80, it#8, lines#30, vt#3,
17496 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17497 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
17498 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17499 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17500 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
17501 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
17502 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
17503 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
17504 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
17505 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
17506 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
17507 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
17508 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
17509 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
17510 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
17513 # Tektronix 4105 from BRL
17514 # The following setup modes are assumed for normal operation:
17515 # CODE ansi CRLF no DABUFFER 141
17516 # DAENABLE yes DALINES 30 DAMODE replace
17517 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
17518 # FLAGGING input INSERTREPLACE replace LFCR no
17519 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
17520 # SELECTCHARSET G1 0 TABS -2
17521 # Other setup modes may be set for operator convenience or communication
17522 # requirements; I recommend
17523 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
17524 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
17525 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
17526 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
17527 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
17528 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
17530 # and factory color maps. After setting these modes, save them with NVSAVE. No
17531 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
17532 # "IC" cannot be used in combination with "im" & "ei".
17533 # "tek4105a" is just a guess:
17534 tek4105a|Tektronix 4105,
17535 OTbs, OTpt, msgr, xon,
17536 OTkn#8, cols#80, it#8, lines#30, vt#3,
17537 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
17538 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
17539 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17540 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17541 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17542 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
17543 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17544 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
17545 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
17546 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17547 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
17548 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
17549 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
17550 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
17551 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17552 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
17553 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
17554 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
17557 # Tektronix 4106/4107/4109 from BRL
17558 # The following setup modes are assumed for normal operation:
17559 # CODE ansi COLUMNMODE 80 CRLF no
17560 # DABUFFER 141 DAENABLE yes DALINES 32
17561 # DAMODE replace DAVISIBILITY yes ECHO no
17562 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
17563 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
17564 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
17566 # Other setup modes may be set for operator convenience or communication
17567 # requirements; I recommend
17568 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
17569 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
17570 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
17571 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
17572 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
17573 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
17575 # and factory color maps. After setting these modes, save them with NVSAVE. No
17576 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
17577 # "IC" cannot be used in combination with "im" & "ei".
17578 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
17580 cols#80, it#8, lines#32, vt#3,
17581 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
17582 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
17583 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
17584 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17585 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17586 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
17587 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17588 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
17589 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
17590 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17591 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
17592 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
17593 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
17594 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
17595 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
17596 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
17597 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
17598 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
17600 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
17601 # 0 selects Tek mode, i.e., \E%!0
17602 # 1 selects ANSI mode
17603 # 2 selects ANSI edit-mode
17604 # 3 selects VT52 mode
17606 # One odd thing about the description (which has been unchanged since the 90s)
17607 # is that the cursor addressing is using VT52 mode, and a few others use the
17608 # VT52's non-CSI versions of ANSI, e.g., \EJ.
17609 tek4107|tek4109|tektronix terminals 4107 4109,
17610 OTbs, am, mir, msgr, ul, xenl, xt,
17611 cols#79, it#8, lines#29,
17612 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
17613 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
17614 cub1=^H, cud1=^J, cuf1=\EC,
17615 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
17616 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
17617 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
17618 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
17619 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
17620 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
17621 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
17622 smul=\E%!1\E[4m$<2>\E%!0,
17623 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
17624 # see the note attached to tek4207.
17625 tek4207-s|Tektronix 4207 with sysline but no memory,
17627 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
17628 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
17629 is2=\E7\E[?6l\E[2K\E[?6h\E8,
17630 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
17632 # The 4110 series may be a wonderful graphics series, but they make the 4025
17633 # look good for screen editing. In the dialog area, you can't move the cursor
17634 # off the bottom line. Out of the dialog area, ^K moves it up, but there
17635 # is no way to scroll.
17637 # Note that there is a floppy for free from Tek that makes the
17638 # 4112 emulate the vt52 (use the vt52 termcap). There is also
17639 # an expected enhancement that will use ANSI standard sequences.
17641 # 4112 in non-dialog area pretending to scroll. It really wraps
17642 # but vi is said to work (more or less) in this mode.
17644 # 'vi' works reasonably well with this entry.
17646 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
17649 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
17650 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
17651 # The 4112 with the ANSI compatibility enhancement
17652 tek4112|tek4114|tektronix 4110 series,
17655 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
17656 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
17657 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
17658 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
17659 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
17660 tek4112-nd|4112 not in dialog area,
17662 cuu1=^K, use=tek4112,
17663 tek4112-5|4112 in 5 line dialog area,
17664 lines#5, use=tek4112,
17665 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
17666 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
17667 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
17668 # previously \0410 and \0411 sequences...I don't *think* they were supposed
17669 # to be 4-digit octal -- esr)
17670 tek4113|tektronix 4113 color graphics with 5 line dialog area,
17673 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
17674 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
17675 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
17676 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
17678 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
17679 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
17680 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
17681 # :vb: needs enough delay to let you see the background color being toggled.
17682 tek4113-nd|tektronix 4113 color graphics with no dialog area,
17684 cols#80, it#8, lines#34,
17685 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
17687 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
17688 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
17689 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
17690 # This entry is from Tek. Inc. (Brian Biehl)
17691 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
17692 otek4115|Tektronix 4115,
17693 OTbs, am, da, db, eo,
17694 cols#80, it#8, lines#34,
17695 cbt=\E[Z, clear=\E[H\E[2J,
17696 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
17697 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17698 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
17699 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
17701 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
17702 kbs=^H, ri=\EM, rmam=\E[?7l,
17703 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
17704 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
17705 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
17707 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
17710 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
17711 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
17712 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17713 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
17714 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
17715 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
17716 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
17717 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
17718 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
17719 rmso=\E[m, rmul=\E[m,
17720 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
17721 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
17722 vpa=\E[%p1%{1}%+%dd,
17723 # The tek4125 emulates a vt100 incorrectly - the scrolling region
17724 # command is ignored. The following entry replaces <csr> with the needed
17725 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
17726 # chokes on; and adds a lot of initialization for the tek dialog area.
17727 # Note that this entry uses all 34 lines and sets the cursor color to green.
17728 # Steve Jacobson 8/85
17729 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
17730 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
17731 tek4125|tektronix 4125,
17733 csr@, dl1=\E[1M, il1=\E[1L,
17734 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
17735 rc@, sc@, smkx=\E=, use=vt100,
17737 # From: <jcoker@ucbic>
17738 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
17739 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
17740 # note that if jcoker wasn't confused you may be able to use this one.
17741 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
17742 tek4207|Tektronix 4207 graphics terminal with memory,
17743 am, bw, mir, msgr, ul, xenl,
17744 cols#80, it#8, lines#32,
17745 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
17746 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17747 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
17748 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
17749 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
17750 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
17751 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
17752 rev=\E[7m, ri=\E[T,
17753 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
17754 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
17755 smul=\E[4m, tbc=\E[1g,
17757 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
17758 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
17759 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
17760 tek4404|tektronix 4404,
17762 cols#80, it#8, lines#32,
17763 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
17764 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
17765 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
17766 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
17767 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
17768 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
17769 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
17770 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
17771 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
17772 # Some unknown person wrote:
17773 # I added the is string - straight Unix has ESC ; in the login
17774 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
17775 # mode). The is string here cleans up a few things (but not
17777 ct8500|tektronix ct8500,
17780 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
17781 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
17782 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
17783 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
17784 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
17786 # Tektronix 4205 terminal.
17788 # am is not defined because the wrap around occurs not when the char.
17789 # is placed in the 80'th column, but when we are attempting to type
17790 # the 81'st character on the line. (esr: hmm, this is like the vt100
17791 # version of xenl, perhaps am + xenl would work!)
17793 # Bold, dim, and standout are simulated by colors and thus not allowed
17794 # with colors. The tektronix color table is mapped into the RGB color
17795 # table by setf/setb. All colors are reset to factory specifications by oc.
17796 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
17797 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
17798 # interval then maps into pre-defined value.
17799 tek4205|tektronix 4205,
17801 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
17802 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
17803 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
17804 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
17805 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17806 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17807 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
17808 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
17809 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
17811 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
17812 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
17813 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
17814 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
17816 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
17817 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
17818 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
17819 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
17820 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
17821 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
17822 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
17823 smul=\E[4m, tbc=\E[1g,
17825 #### Teletype (tty)
17827 # These are the hardcopy Teletypes from before AT&T bought the company,
17828 # clattering electromechanical dinosaurs in Bakelite cases that printed on
17829 # pulpy yellow roll paper. If you remember these you go back a ways.
17830 # Teletype-branded VDTs are listed in the AT&T section.
17832 # The earliest UNIXes were designed to use these clunkers; nroff and a few
17833 # other programs still default to emitting codes for the Model 37.
17836 tty33|tty35|model 33 or 35 teletype,
17839 bel=^G, cr=^M, cud1=^J, ind=^J,
17840 tty37|model 37 teletype,
17842 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
17845 # There are known to be at least three flavors of the tty40, all seem more
17846 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
17847 # awful braindamage, such as printing a visible newline indicator after each
17848 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
17849 # braindamaged but has hope and is described here. The 40-4 is a 3270
17850 # lookalike and beyond hope. The terminal has visible bell but I don't know
17851 # it - it's null here to prevent it from showing the BL character.
17852 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
17853 # a "newline" style terminal (-crmode) vi figures all it needs is nl
17854 # to get crlf, even if <cr> is not ^M.)
17855 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
17856 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
17859 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
17860 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
17861 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
17862 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
17863 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
17864 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
17865 tty43|model 43 teletype,
17866 OTbs, am, hc, os, xon,
17868 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
17873 # You can add <is2=\E<> to put this 40-column mode, though I can't
17874 # for the life of me think why anyone would want to.
17875 scanset|sc410|sc415|Tymshare Scan Set,
17878 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
17879 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
17880 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
17881 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
17882 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
17884 #### Volker-Craig (vc)
17886 # If you saw a Byte Magazine cover with a terminal on it during the early
17887 # 1980s, it was probably one of these. Carl Helmers liked them because
17888 # they could crank 19.2 and were cheap (that is, he liked them until he tried
17889 # to program one...)
17892 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
17893 # every other linefeed.
17894 vc303|vc103|vc203|volker-craig 303,
17897 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
17898 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
17899 kcuu1=^N, ll=\017$<1>W,
17900 vc303a|vc403a|volker-craig 303a,
17901 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
17902 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
17903 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
17904 vc404|volker-craig 404,
17907 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
17908 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
17909 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
17910 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
17911 vc404-s|volker-craig 404 w/standout mode,
17912 cud1=^J, rmso=^O, smso=^N, use=vc404,
17913 # From: <wolfgang@cs.sfu.ca>
17914 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
17915 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
17918 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
17919 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
17920 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
17921 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
17922 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
17923 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
17924 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
17925 rmso=\E^_, smso=\E^Y,
17926 vc415|volker-craig 415,
17927 clear=^L, use=vc404,
17929 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
17932 #### IBM PC and clones
17935 # The pcplot IBM-PC terminal emulation program is really messed up. It is
17936 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
17937 # doesn't support scrolling regions, ignores add line commands, and ignores
17938 # delete line commands. Consequently, the resulting behavior looks like a
17939 # crude adm3a-type terminal.
17940 # Steve Jacobson 8/85
17941 pcplot|pc-plot terminal emulation program,
17943 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
17944 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
17945 # I've found that my KayPro II, running MDM730, continues to emulate an
17946 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
17947 # system the following termcap entry works well:
17948 # I have noticed a couple of minor glitches, but nothing I can't work
17949 # around. (I added two capabilities from the BRL entry -- esr)
17950 kaypro|kaypro2|kaypro II,
17953 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
17954 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
17955 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
17957 # From IBM, Thu May 5 19:35:27 1983
17958 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
17959 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
17962 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
17963 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
17965 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
17966 OTbs, am, bw, eo, hs, km, msgr, ul,
17967 cols#80, it#8, lines#24,
17968 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
17969 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
17970 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
17971 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17972 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
17973 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
17974 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
17975 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17976 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
17977 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
17978 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
17979 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
17980 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
17981 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t30;40%;m,
17982 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
17986 # Apple II firmware console first, then various 80-column cards and
17987 # terminal emulators. For two cents I'd toss all these in the UFO file
17988 # along with the 40-column apple entries.
17991 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
17992 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
17993 # function of TIC, not the firmware.
17994 # The clear key on a IIgs will do something like clear-screen,
17995 # depending on what you're in.
17996 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
17997 OTbs, am, bw, eo, msgr,
17998 cols#80, it#8, lines#24,
17999 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
18000 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18001 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
18002 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
18004 # Apple //e with 80-column card, entry from BRL
18005 # The modem interface is permitted to discard LF (maybe DC1), otherwise
18006 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
18007 # Auto-wrap does not work right due to newline scrolling delay, which also
18008 # requires that you set "stty cr2".
18009 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
18010 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
18011 # using a terminal emulation program instead of the built-in firmware.
18015 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
18016 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
18017 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
18018 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
18020 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
18021 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
18022 apple2e-p|Apple //e via Pascal,
18023 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
18024 kcud1=^J, use=apple2e,
18025 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
18026 # Enable DC3/DC1 flow control with "stty ixon -ixany".
18027 apple-ae|ASCII Express,
18028 OTbs, am, bw, msgr, nxon, xon,
18029 cols#80, it#8, lines#24,
18030 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
18031 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18032 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
18033 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
18035 appleII|apple ii plus,
18037 cols#80, it#8, lines#24,
18038 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
18039 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
18040 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
18041 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
18043 # Originally by Gary Ford 21NOV83
18044 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
18045 apple-80|apple II with smarterm 80 col,
18048 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
18049 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
18050 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
18051 apple-soroc|apple emulating soroc 120,
18054 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18055 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
18056 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
18057 # From Peter Harrison, Computer Graphics Lab, San Francisco
18058 # ucbvax!ucsfmis!harrison .....uucp
18059 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
18060 # "These two work. If you don't have the inverse video chip for the
18061 # Apple with videx then remove the :so: and :se: fields."
18062 # (apple-videx: this used to be called DaleApple -- esr)
18063 apple-videx|Apple with videx videoterm 80 column board with inverse video,
18065 cols#80, it#8, lines#24,
18066 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
18067 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18068 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
18069 rmso=^Z2, sgr0=^Z2, smso=^Z3,
18070 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
18071 # Apple Cat ][ 212 modem, + more all
18072 # controlled by ASCII Express: Pro.
18073 # From Dave Shaver <isucs1!shaver>
18074 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
18077 acsc=, clear=^L, cuf1=^\,
18078 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18079 flash=^W35^W06, home=^Y,
18080 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
18082 apple-uterm|Ultraterm for Apple micros,
18085 acsc=, clear=^L, cuf1=^\,
18086 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18087 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
18088 # from trwrba!bwong (Bradley W. Wong):
18090 # This entry assumes that you are using an apple with the UCSD Pascal
18091 # language card. SYSTEM.MISCINFO is assumed to be the same as that
18092 # supplied with the standard apple except that screenwidth should be set
18093 # using SETUP to 80 columns. Note that the right arrow is not mapped in
18094 # this termcap entry. This is because that key, on the Apple, transmits
18095 # a ^U and would thus preempt the more useful "up" function of vi.
18098 apple80p|80-column apple with Pascal card,
18101 clear=^Y^L, cuf1=^\\:,
18102 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18105 # Apple II+ equipped with Videx 80 column card
18107 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
18108 # manually converted by D A Gwyn
18110 # DO NOT use any terminal emulation with this data base, it works directly
18111 # with the Videx card. This has been tested with vi 1200 baud and works fine.
18113 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
18114 # 1 screen, while in R2 ^U doesn't.
18115 # For inverse alternate character set add:
18116 # <smacs>=^O:<rmacs>=^N:
18117 # (apple-v: added it#8 -- esr)
18118 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
18120 cols#80, it#8, lines#24,
18121 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
18122 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
18123 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
18124 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
18125 khome=^Y, rmso=^Z2, smso=^Z3,
18126 apple-videx3|vapple|Apple II with 80 col card,
18129 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
18130 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
18131 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18132 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
18133 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
18134 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
18135 aepro|Apple II+ running ASCII Express Pro--vt52,
18138 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
18139 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18141 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
18142 apple-vm80|ap-vm80|apple with viewmax-80,
18145 clear=\014$<300/>, cuf1=^\\:,
18146 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
18147 ed=\013$<300/>, el=^], home=\031$<200/>,
18149 #### Apple Lisa & Macintosh
18152 # (lisa: changed <cvvis> to <cnorm> -- esr)
18153 lisa|apple lisa console display (black on white),
18154 OTbs, am, eo, msgr,
18155 cols#88, it#8, lines#32,
18156 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
18157 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
18158 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
18159 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
18160 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18161 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
18162 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
18163 liswb|apple lisa console display (white on black),
18164 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
18165 smso=\E[m, smul=\E[4m, use=lisa,
18167 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
18168 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
18170 # These entries assume that the 'Auto Wraparound' is enabled.
18171 # Xon-Xoff flow control should also be enabled.
18173 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
18174 # settings are in non-volatile memory and don't need to be reset upon login.
18175 # Also setting the number of columns glitches the screen annoyingly.
18176 # You can type "reset" to get them set.
18178 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
18179 OTbs, OTpt, am, xenl, xon,
18180 OTkn#4, cols#80, it#8, lines#24, vt#3,
18181 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
18182 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18183 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
18184 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
18185 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
18186 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
18187 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
18188 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18189 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
18190 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
18192 # Lisaterm in 132 column ("wide") mode.
18193 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
18195 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
18196 # Although MacTerminal has insert/delete line, it is commented out here
18197 # since it is much faster and cleaner to use the "lock scrolling region"
18198 # method of inserting and deleting lines due to the MacTerminal implementation.
18199 # Also, the "Insert/delete ch" strings have an extra character appended to them
18200 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
18201 # supported by MacTerminal.
18202 mac|macintosh|Macintosh with MacTerminal,
18205 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
18206 # Lisaterm in 132 column ("wide") mode.
18207 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
18210 #### Radio Shack/Tandy
18213 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
18214 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
18215 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
18216 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
18218 cols#80, it#8, lines#24,
18219 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
18220 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
18221 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
18222 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
18223 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
18224 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
18225 # (trs2: removed obsolete ":nl=^_:" -- esr)
18226 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
18228 cols#80, it#8, lines#24,
18229 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
18230 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
18231 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
18232 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
18233 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
18234 # (This had extension capabilities
18235 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
18236 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
18237 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
18238 trs16|trs-80 model 16 console,
18240 cols#80, it#8, lines#24,
18241 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
18242 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18243 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
18244 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
18245 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18246 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
18247 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
18248 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
18249 smacs=\ERG, smso=\ERD,
18251 #### Commodore Business Machines
18253 # Formerly located in West Chester, PA; went spectacularly bust in 1994
18254 # after years of shaky engineering and egregious mismanagement. Made one
18255 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
18256 # C-128, VIC-20). The C-64 is said to have been the most popular machine
18257 # ever (most units sold); they can still be found gathering dust in closets
18261 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
18262 # Added a few more entries, converted caret-type control sequence (^x) entries
18263 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
18264 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
18266 # :as:, :ae: Support for alternate character sets.
18267 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
18268 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
18269 # This one appears to fix a problem I always had with a line ending
18270 # at 'width+1' (I think) followed by a blank line in vi. The blank
18271 # line tended to disappear and reappear depending on how the screen
18272 # was refreshed. Note that this is probably needed only if you use
18273 # something like a Dnet Fterm with the window sized to some peculiar
18274 # dimension larger than 80 columns.
18275 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
18276 # (amiga: removed obsolete :kn#10:,
18277 # also added empty <acsc> to suppress a warning --esr)
18279 OTbs, am, bw, xenl,
18281 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
18282 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
18283 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
18284 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
18285 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
18286 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
18287 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
18288 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
18289 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
18290 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
18291 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
18292 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
18293 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
18295 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
18296 # (amiga: added empty <acsc> to suppress a warning.
18297 # I'm told this entry screws up badly with AS225, the Amiga
18298 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
18299 amiga-h|Hans Verkuil's Amiga ANSI,
18302 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
18303 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
18304 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
18305 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
18306 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
18307 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
18308 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
18309 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
18310 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
18311 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
18312 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
18313 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
18314 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
18315 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
18316 smso=\2337m, smul=\2334m,
18318 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
18320 # Pavel Fedin added
18325 amiga-8bit|Amiga ANSI using 8-bit controls,
18326 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
18327 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
18328 kpp=\233T, ri=\215, rin@, use=amiga-h,
18330 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
18331 # requires use of appropriate preferences settings.
18332 amiga-vnc|Amiga using VNC console (black on light gray),
18333 am, da, db, msgr, ndscr,
18334 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
18335 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
18336 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
18337 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
18338 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18339 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18340 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
18341 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
18342 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
18343 indn=\E[%p1%dS, invis=\E8m,
18344 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
18345 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18346 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
18347 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
18348 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
18349 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
18350 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
18351 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
18352 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
18353 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
18354 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
18355 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
18356 smso=\E[1m, smul=\E[4m,
18358 # MorphOS on Genesi Pegasos
18359 # By Pavel Fedin <sonic_amiga@rambler.ru>
18361 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
18362 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
18363 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
18364 ri=\215, rin@, use=amiga-h,
18366 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
18367 # I'm trying to write a termcap for a commodore b-128, and I'm
18368 # having a little trouble. I've had to map most of my control characters
18369 # to something that unix will accept (my delete-char is a ctrl-t, etc),
18370 # and create some functions (like cm), but thats life.
18371 # The problem is with the arrow keys - right, and up work fine, but
18372 # left deletes the previous character and down I just can't figure out.
18373 # Jove knows what I want, but I don't know what it's sending to me (it
18374 # isn't thats bound to next-line in jove).
18375 # Anybody got any ideas? Here's my termcap.
18376 # DAG -- I changed his "^n" entries to "\n"; see if that works.
18378 commodore|b-128|Commodore B-128 micro,
18380 OTdN#20, cols#80, lines#24, pb#150,
18381 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
18382 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
18383 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
18384 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
18385 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
18390 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
18391 northstar|North Star Advantage,
18395 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
18396 el=\016$<200/>, home=\034\032$<200/>,
18400 # Thu Jul 7 03:55:16 1983
18402 # As an aside, be careful; it may sound like an anomaly on the
18403 # Osborne, but with the 80-column upgrade, it's too easy to
18404 # enter lines >80 columns!
18406 # I've already had several comments...
18407 # The Osborne-1 with the 80-col option is capable of being
18408 # 52, 80, or 104 characters wide; default to 80 for compatibility
18409 # with most systems.
18411 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
18412 osborne-w|osborne1-w|osborne I in 104-column mode,
18414 cols#104, lines#24,
18415 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18416 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18417 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
18418 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
18419 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
18420 osborne|osborne1|osborne I in 80-column mode,
18421 OTbs, am, mir, msgr, ul, xhp,
18422 OTdB#4, cols#80, lines#24,
18423 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
18424 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
18425 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
18426 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
18427 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
18429 # Osborne Executive definition from BRL
18430 # Similar to tvi920
18431 # Added by David Milligan and Tom Smith (SMU)
18432 osexec|Osborne executive,
18434 OTug#1, cols#80, lines#24, xmc#1,
18435 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18436 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18437 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
18438 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
18439 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
18440 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
18441 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
18444 #### Console types for obsolete UNIX clones
18446 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
18447 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
18448 # were commercial, Minix an educational tool sold in conjunction with a book.
18449 # Memory-segmentation limits and a strong tendency to look like V7 long after
18450 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
18451 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
18452 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
18453 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
18454 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
18455 # even as single processes under SunOS and the Macintosh OS.
18459 # http://www.minix3.org/manpages/html4/console.html
18460 minix|minix console (v3),
18461 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
18462 kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
18463 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
18464 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
18465 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
18466 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
18467 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
18468 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
18469 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
18470 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
18471 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
18472 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
18473 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
18474 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
18477 minix-3.0|minix console (v3.0),
18478 use=ecma+color, use=minix-1.7,
18481 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
18482 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
18483 minix-1.7|minix console (v1.7),
18485 cols#80, it#8, lines#25,
18486 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18487 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18488 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18489 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18490 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
18491 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
18492 il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18493 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
18494 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
18495 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
18496 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
18497 smso=\E[7m, smul=\E[4m,
18498 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
18499 minix-old|minix-1.5|minix console (v1.5),
18501 cols#80, it#8, lines#25,
18502 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
18503 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18504 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18505 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18506 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
18507 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
18508 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18509 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
18510 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
18511 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
18512 # The linewrap option can be specified by editing /usr/include/minix/config.h
18513 # before recompiling the minix 1.5 kernel.
18514 minix-old-am|minix console with linewrap,
18517 pc-minix|minix console on an Intel box,
18518 use=klone+acs, use=minix-3.0,
18520 # According to the Coherent 2.3 manual, the PC console is similar
18521 # to a z19. The differences seem to be (1) 25 lines, (2) no status
18522 # line, (3) standout is broken, (4) ins/del line is broken, (5)
18523 # has blinking and bold.
18524 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
18526 cols#80, it#8, lines#25,
18527 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
18528 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
18529 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
18530 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
18531 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
18533 # According to the Venix 1.1 manual, the PC console is similar
18534 # to a DEC vt52. Differences seem to be (1) arrow keys send
18535 # different strings, (2) enhanced standout, (3) added insert/delete line.
18536 # Note in particular that it doesn't have automatic margins.
18537 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
18538 # not described here because this derives from an old termcap entry.
18539 pc-venix|venix|IBM PC console running Venix,
18540 cols#80, it#8, lines#25,
18541 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
18542 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
18543 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
18544 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
18546 #### Miscellaneous microcomputer consoles
18548 # If you know anything more about any of these, please tell me.
18551 # The MAI Basic Four computer was obsolete at the end of the 1980s.
18552 # It may be used as a terminal by putting it in "line" mode as seen on
18553 # one of the status lines.
18554 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
18555 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
18556 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
18557 # used \ED instead.
18558 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
18559 mai|basic4|MAI Basic Four in ansi mode,
18560 am, da, db, mir, msgr,
18561 cols#82, it#8, lines#25,
18562 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
18563 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
18564 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
18565 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
18566 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
18567 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
18568 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18569 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
18570 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
18571 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
18572 smir=\E[4h, smso=\E[7m, smul=\E[4m,
18573 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
18574 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
18576 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
18577 # The Basis 108 was a Apple II clone, manufactured by the "Basis
18578 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
18579 # about 1,5 km from where I live, but doesn't build own computers any
18580 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
18581 # equipped with one or two 5.25" disk drives, had a monochrome and colour
18582 # video output for a TV set or a dedicated monitor and several slots for
18583 # Apple II cards. Basis 108 were quite popular at german schools before
18584 # the advent of the IBM PC. They run, for example, the UCSD Pascal
18585 # development system (which I used even in 1993 to program the steering
18586 # and data recording for our school's experimental solar panel :), Apple DOS
18588 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
18589 basis|BASIS108 computer with terminal translation table active,
18590 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
18591 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
18592 smso=\E(, use=adm3a,
18593 # luna's BMC terminal emulator
18594 luna|luna68k|LUNA68K Bitmap console,
18595 cols#88, lines#46, use=ansi-mini,
18596 megatek|pegasus workstation terminal emulator,
18599 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
18600 # interface (pre-Macintosh by several years) that went nowhere.
18601 xerox820|x820|Xerox 820,
18604 bel=^G, clear=\032$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
18605 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
18608 #### Videotex and teletext
18611 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
18612 # \E[?3l 80 columns
18613 # \E[?4l scrolling on
18614 # \E[12h local echo off
18615 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
18616 # \E)0 G1 DEC set (line graphics)
18618 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
18619 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
18620 OTbs, eslok, hs, xenl,
18621 cols#80, it#8, lines#24, wsl#72, xmc#0,
18622 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
18623 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
18624 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
18625 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
18626 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18627 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18628 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
18629 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
18630 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
18631 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
18632 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
18633 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
18634 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
18635 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
18636 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
18637 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
18638 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
18639 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
18640 u6=\E[%i%d;%dR, u7=\E[6n,
18642 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
18644 minitel1|minitel 1,
18645 am, bw, eslok, hs, hz, msgr,
18646 colors#8, cols#40, lines#24, pairs#8,
18647 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
18648 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
18649 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
18650 enacs=^Y, fsl=^J, home=^^, ind=^J,
18651 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
18652 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
18653 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
18654 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
18655 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
18656 # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
18657 minitel1b|minitel 1-bistandard (in 40cols mode),
18659 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
18660 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
18661 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
18662 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
18663 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18664 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
18665 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
18666 # <rmkx> posait des problemes (logout en sortant de vi).
18667 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
18669 colors@, cols#80, it#8, pairs@,
18670 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
18671 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
18672 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
18673 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
18674 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
18675 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
18676 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
18677 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
18678 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
18680 ######## OBSOLETE VDT TYPES
18682 # These terminals are *long* dead -- these entries are retained for
18683 # historical interest only.
18685 #### Amtek Business Machines
18688 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
18689 # but these caps were commented out in 8.3; also, removed overridden
18690 # ":do=^J:" -- esr)
18691 abm80|amtek business machines 80,
18694 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
18695 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
18696 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
18698 #### Bell Labs blit terminals
18700 # These were AT&T's official entries. The 5620 FAQ maintained by
18701 # David Breneman <daveb@dgtl.com> has this to say:
18703 # Actually, in the beginning was the Jerq, and the Jerq was white with a
18704 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
18705 # was good. But lo, upon the horizon loomed a mighty management-type person
18706 # (known now only by the initials VP) who said, the mighty Jerq must stay
18707 # alone, and could not go forth into the world. So Locanthi and Pike put the
18708 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
18709 # world. And the Jerq lived the rest of its days in research, but never
18710 # strayed from those paths.
18712 # In all seriousness, the Blit was originally known as the Jerq, but when
18713 # it started to be shown outside of the halls of the Bell Labs Research
18714 # organization, the management powers that be decided that the name could
18715 # not remain. So it was renamed to be Blit. This was in late 1981.
18717 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
18721 blit|jerq|blit running teletype rom,
18723 cols#87, it#8, lines#72,
18724 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18725 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
18726 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
18727 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
18728 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
18729 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
18731 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
18732 cbblit|fixterm|blit running columbus code,
18734 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
18735 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
18736 smul=\EU", use=blit,
18738 oblit|ojerq|first version of blit rom,
18739 am, da, db, eo, mir, ul, xon,
18740 cols#88, it#8, lines#72,
18741 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
18742 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
18743 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
18744 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
18747 #### Bolt, Beranek & Newman (bbn)
18749 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
18750 # The parent company, best known as the architects of the Internet, is
18753 # Jeff DelPapa <dp@world.std.com> writes:
18754 # The bitgraph was a large white box that contained a monochrome bitmap
18755 # display, and a 68000 to run it. You could download code and run it on
18756 # the cpu, it had 128kb (I think) of memory. I used one in the late
18757 # 70's, sure beat a vt100. It had one strange feature tho -- it used
18758 # the cpu to bitblt pixels to scroll, it took longer than the refresh
18759 # rate, and looked like a rubber sheet stretching, then snapping
18760 # upwards. It had everything the early mac had, except a floppy drive a
18761 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
18762 # Beranek and Neuman) sold at most a few hundred of them to the real
18763 # world. DOD may have bought more...
18766 # Entries for the BitGraph terminals. The problem
18767 # with scrolling in vi can only be fixed by getting BBN to put
18768 # smarter scroll logic in the terminal or changing vi or padding
18769 # scrolls with about 500 ms delay.
18771 # I always thought the problem was related to the terminal
18772 # counting newlines in its input buffer before scrolling and
18773 # then moving the screen that much. Then vi comes along and
18774 # paints lines in on the bottom line of the screen, so you get
18775 # this big white gap.
18777 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
18778 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18780 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
18781 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18783 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
18786 bel=^G, clear=\E[H\E[J$<150>, cr=^M,
18787 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18788 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
18789 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
18790 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
18791 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
18792 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
18793 sgr0=\E[m, smkx=\E=, smso=\E[7m,
18795 bg1.25rv|bbn bitgraph 1.25 (reverse video),
18796 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
18798 bg1.25nv|bbn bitgraph 1.25 (normal video),
18799 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
18801 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
18802 bg1.25|bbn bitgraph 1.25,
18804 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
18805 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
18806 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
18807 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
18808 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
18809 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
18810 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
18813 #### Bull (bq, dku, vip)
18815 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
18817 #============================================#
18818 # BULL QUESTAR 210 `SDP' terminals emulation #
18819 #============================================#
18821 # Description written by R.K.Saunders (Bull Transac)
18823 # Modifications written by F. Girard (Bull MTS)
18824 # 19-05-87 V02.00.01
18825 # 17-12-87 V02.00.02
18826 # 15-09-89 V02.00.05
18828 # Typical technical selections F1 (modes SDP/ROLL):
18829 # -------------------------------------------------------
18830 # | 01 02 03 04 05 06 07 08 09 10 |
18831 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
18833 # | 11 12 13 14 15 16 17 18 19 20 |
18834 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
18836 # | 21 22 23 24 25 26 27 28 29 30 |
18837 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
18839 # | 31 32 33 34 35 36 37 38 39 40 |
18840 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
18841 # -------------------------------------------------------
18842 # Typical firmware identification F5 "etat 6":
18843 # P287.02.04b (AZERTY)
18844 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
18845 # P298.03.03 (monochrome) or P374.03.02 (colour)
18847 # SM SDP mode (VIP command): ^[[?=h
18848 # RIS (erases screen): ^[c
18849 # DMI disable keyboard: ^[`
18850 # SM double rendition mode: ^[[?>h
18851 # RM solicited status mode: ^[[5l
18852 # RM character mode: ^[[>l
18853 # RM echoplex mode: ^[[12l
18854 # RM column tab mode: ^[[18l
18855 # RM forbid SS2 keyboard mode: ^[[?<l
18856 # SM scroll mode: ^[[=h
18857 # FCF enable XON/XOFF: ^[P1s^[\
18858 # MTL select end msg character: ^[[^Wp
18859 # EMI enable keyboard: ^[b
18860 # RIS retour etat initial: ^[c
18861 # enable FC keypad: ^[[?<h,
18862 # MPW map status line window: ^[PY99:98^[\
18863 # SCP select status line: ^[[0;98v
18864 # ED erase entire partition: ^[[2J
18865 # SCP select main partition: ^[[v
18866 # SM character insertion mode: ^[[4h
18867 # RM character replacement mode: ^[[4l
18868 # COO cursor on: ^[[r
18869 # COO cursor off: ^[[1r
18870 # SGR dim (turquoise) rev attr: ^[[2;7m
18871 # SGR Data normal attr: ^[[m
18872 # SO Line-graphic mode ON: ^N
18873 # SI Line-graphic mode OFF: ^O
18874 # MC start routing to printer: ^[[5i
18875 # MC stop routing to printer: ^M^[[4i
18878 # This entry covers the following terminals:
18879 # dku7102, tws2102, and tws models 2105 to 2112
18880 tws-generic|dku7102|Bull Questar tws terminals,
18881 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
18882 cols#80, it#8, lines#24, wsl#80,
18883 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
18884 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
18885 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
18886 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
18887 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
18888 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
18889 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
18890 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
18891 il1=\E[L, ind=^J, invis=\E[0;8m,
18892 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
18893 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
18894 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
18895 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
18896 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
18897 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
18898 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
18899 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
18900 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
18901 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
18902 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
18903 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18904 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
18905 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
18906 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
18907 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
18908 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
18910 tws2103|xdku|BULL Questar tws2103,
18911 ht=^I, use=tws-generic,
18912 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
18913 ht=^I, use=tws2102-sna,
18914 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
18915 clear=\E[2J\E[H, cup@, dl@, dl1@,
18916 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
18917 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
18919 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
18920 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
18921 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;%?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
18922 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
18924 #=========================================================#
18925 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
18926 #=========================================================#
18928 # Description written by J. Staerck (BULL SA)
18929 # Copyright (c) 1989 BULL SA
18930 #---------------------------------------------------------------------------
18931 # This entry is used for terminals with vt320 emulation mode
18932 # and following set-up :
18933 # 8 bit ISO Latin Character Set (ISO 8859-1),
18934 # 7 bit Control Characters,
18935 # 80 columns screen.
18936 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
18937 # They are used in string capabilities with vt220-320 emulation mode.
18938 # In the following DEC definitions, two kinds of terminfo databases are
18940 # 1. the first with Command Sequence Introducer starting with escape
18941 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
18942 # 2. the second with Command Sequence Introducer starting with escape
18943 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
18944 # Soft Terminal Reset esc [ ! p
18945 # RIS (erases screen): esc c
18946 # DECKPNM numeric keypad mode: esc >
18947 # DECKPAM applic. keypad mode: esc =
18948 # DECSTBM Scrolling region: esc [ r
18949 # SCS select G0 = US: esc ( B
18950 # SCS select G1 = line-graphic: esc ) 0
18951 # Select 7-bit C1 controls: esc sp F
18952 # Select 8-bit C1 controls: esc sp G
18953 # Select cursor home: esc [ H
18954 # Select erase screen: esc [ J
18955 # SM KAM lock keyboard: esc [ 2 h
18956 # RM KAM unlock keyboard: esc [ 2 l
18957 # SM SRM local echo off: esc [ 1 2 h
18958 # RM SRM local echo on: esc [ 1 2 l
18959 # SM LNM New line : esc [ 2 0 h
18960 # RM LNM return = CR only: esc [ 2 0 l
18961 # SM DECCKM cursor keys mode: esc [ ? 1 h
18962 # RM DECCKM appli. keys mode: esc [ ? 1 l
18963 # SM DECANM ANSI mode on: esc [ ? 2 h
18964 # RM DECANM ANSI mode off: esc [ ? 2 l
18965 # SM DECCOLM 132-column screen: esc [ ? 3 h
18966 # RM DECCOLM 80-column screen: esc [ ? 3 l
18967 # SM DECSCLM Smooth scroll: esc [ ? 4 h
18968 # RM DECSCLM Jump scroll: esc [ ? 4 l
18969 # SM DECSCNM screen light backgr. esc [ ? 5 h
18970 # RM DECSCNM screen dark backgr. esc [ ? 5 l
18971 # SM DECOM move within margins: esc [ ? 6 h
18972 # RM DECOM move outside margins: esc [ ? 6 l
18973 # SM DECAWM auto right margin: esc [ ? 7 h
18974 # RM DECAWM auto right margin: esc [ ? 7 l
18975 # SM DECARM auto repeat: esc [ ? 8 h
18976 # RM DECARM auto repeat: esc [ ? 8 l
18977 # DECSASD Select active main: esc [ 0 $ }
18978 # DECSASD Select active status: esc [ 1 $ }
18979 # DECSSDT Select status none: esc [ 0 $ ~
18980 # DECSSDT Select status indic.: esc [ 1 $ ~
18981 # DECSSDT Select status host-wr: esc [ 2 $ ~
18982 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
18983 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
18984 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
18985 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
18986 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
18987 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
18988 # SM DECKBUM clavier informatique esc [ ? 6 8 h
18989 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
18990 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
18991 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
18992 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
18993 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
18994 # Char. and Line attributes: esc [ Ps ... Ps m
18995 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
18996 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
18999 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
19000 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
19001 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
19002 cols#80, it#8, lines#24, vt#3, wsl#80,
19003 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19004 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19005 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
19006 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
19007 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19008 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19009 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
19010 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
19011 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
19012 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
19013 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
19014 is1=\E[63;1"p\E[2h,
19015 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
19016 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
19017 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
19018 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
19019 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
19020 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
19021 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
19022 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
19023 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
19024 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
19025 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
19026 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
19027 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
19029 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
19030 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
19031 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
19032 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
19033 bq300-rv|Bull vt320 reverse 80 columns,
19034 flash=\E[?5l$<50>\E[?5h,
19035 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
19037 bq300-w|Bull vt320 132 columns,
19039 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
19040 rs2=\E[?3h, use=bq300,
19041 bq300-w-rv|Bull vt320 reverse mode 132 columns,
19043 flash=\E[?5l$<50>\E[?5h,
19044 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
19045 rs2=\E[?3h, use=bq300,
19047 # This entry is used for terminals with vt320 emulation mode
19048 # and following set-up :
19049 # 8 bit ISO Latin Character Set (ISO 8859-1),
19050 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
19051 # 80 columns screen.
19052 # Soft Terminal Reset csi ! p
19053 # RIS (erases screen): esc c
19054 # DECKPNM numeric keypad mode: esc >
19055 # DECKPAM applic. keypad mode: esc =
19056 # DECSTBM Scrolling region: esc [ r
19057 # SCS select G0 = US: esc ( B
19058 # SCS select G1 = line-graphic: esc ) 0
19059 # Select 7-bit C1 controls: esc sp F
19060 # Select 8-bit C1 controls: esc sp G
19061 # Select cursor home: csi H
19062 # Select erase screen: csi J
19063 # SM KAM lock keyboard: csi 2 h
19064 # RM KAM unlock keyboard: csi 2 l
19065 # SM SRM local echo off: csi 1 2 h
19066 # RM SRM local echo on: csi 1 2 l
19067 # SM LNM New line : csi 2 0 h
19068 # RM LNM return = CR only: csi 2 0 l
19069 # SM DECCKM cursor keys mode: csi ? 1 h
19070 # RM DECCKM appli. keys mode: csi ? 1 l
19071 # SM DECANM ANSI mode on: csi ? 2 h
19072 # RM DECANM ANSI mode off: csi ? 2 l
19073 # SM DECCOLM 132-column screen: csi ? 3 h
19074 # RM DECCOLM 80-column screen: csi ? 3 l
19075 # SM DECSCLM Smooth scroll: csi ? 4 h
19076 # RM DECSCLM Jump scroll: csi ? 4 l
19077 # SM DECSCNM screen light backgr. csi ? 5 h
19078 # RM DECSCNM screen dark backgr. csi ? 5 l
19079 # SM DECOM move within margins: csi ? 6 h
19080 # RM DECOM move outside margins: csi ? 6 l
19081 # SM DECAWM auto right margin: csi ? 7 h
19082 # RM DECAWM auto right margin: csi ? 7 l
19083 # SM DECARM auto repeat: csi ? 8 h
19084 # RM DECARM auto repeat: csi ? 8 l
19085 # DECSASD Select active main: csi 0 $ }
19086 # DECSASD Select active status: csi 1 $ }
19087 # DECSSDT Select status none: csi 0 $ ~
19088 # DECSSDT Select status indic.: csi 1 $ ~
19089 # DECSSDT Select status host-wr: csi 2 $ ~
19090 # SM DECTCEM Visible cursor: csi ? 2 5 h
19091 # RM DECTCEM Invisible cursor: csi ? 2 5 l
19092 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
19093 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
19094 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
19095 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
19096 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
19097 # Char. and Line attributes: csi Ps ... Ps m
19098 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
19099 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
19100 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
19101 bq300-8|Bull vt320 full 8 bits 80 columns,
19102 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
19103 cols#80, it#8, lines#24, vt#3, wsl#80,
19104 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19105 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
19106 clear=\233H\233J, cnorm=\233?25h, cr=^M,
19107 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
19108 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
19109 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
19110 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
19111 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
19112 el=\233K, el1=\2331K, enacs=\E(B\E)0,
19113 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
19114 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
19115 ind=\ED, is1=\E[63;2"p\E[2h,
19116 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
19117 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
19118 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
19119 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
19120 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
19121 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
19122 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
19123 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
19124 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
19125 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
19126 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
19127 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
19128 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
19129 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
19130 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
19131 s0ds=\E(B, s1ds=\E(0, sc=\E7,
19132 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
19133 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
19134 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
19135 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
19136 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
19137 flash=\233?5l$<50>\233?5h,
19138 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
19140 bq300-8w|Bull vt320 8-bit 132 columns,
19142 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
19143 rs2=\233?3h, use=bq300-8,
19144 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
19146 flash=\233?5l$<50>\233?5h,
19147 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
19148 rs2=\233?3h, use=bq300-8,
19150 # This entry is used for terminals with vt320 emulation mode
19151 # a 102 keys keyboard (PC scancode !) and following set-up :
19152 # 8 bit ISO Latin Character Set (ISO 8859-1),
19153 # 7 bit Control Characters,
19154 # 80 columns screen.
19155 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
19156 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
19157 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
19158 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
19159 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
19160 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
19161 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
19162 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
19163 flash=\E[?5l$<50>\E[?5h,
19164 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
19166 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
19168 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
19169 rs2=\E[?3h, use=bq300-pc,
19170 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
19172 flash=\E[?5l$<50>\E[?5h,
19173 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
19174 rs2=\E[?3h, use=bq300-pc,
19175 # 8 bit ISO Latin Character Set (ISO 8859-1),
19176 # 8 bit Control Characters,
19177 # 80 columns screen.
19178 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
19179 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
19180 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
19181 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
19182 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
19183 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
19184 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
19185 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
19186 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
19187 flash=\E[?5l$<50>\E[?5h,
19188 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
19190 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
19192 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
19193 rs2=\E[?3h, use=bq300-8-pc,
19194 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
19196 flash=\E[?5l$<50>\E[?5h,
19197 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
19198 rs2=\E[?3h, use=bq300-8-pc,
19200 #======================================================#
19201 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
19202 #======================================================#
19204 # normal mode, 8 bits, 80 columns terminal.
19206 # RIS reset initial state: ^[c
19207 # BLE bell enable ^[h
19208 # BLD bell disable ^[g
19209 # CAMS char. attr. mode set ^[[D
19210 # CAMR char. attr. mode reset ^[[G
19212 # KBU keyboard unlock (set) ^[[W
19213 # KBL keyboard lock (reset) ^[[X
19214 # CM character mode (async.) ^[k
19215 # NEP non echoplex mode (by host) ^[l
19216 # EP echoplex mode (by host) ^[m
19217 # IM insert mode set ^[[I
19218 # IM insert mode reset ^[[J
19219 # RMS roll mode set ^[r
19220 # RMR roll mode reset ^[q
19221 # SM78 set mode vip7800 ^[[1q
19222 # SD scroll up (72 lines) ^[[0s
19223 # SD scroll down (72 lines) ^[[1s
19224 # RBM block mode reset ^[[E
19225 # SLS status line set ^[w
19226 # SLR status line reset ^[v
19227 # SLL status line lock ^[O
19228 # LGS Line-graphic mode set ^[G
19229 # LGR Line-graphic mode reset ^[F
19230 # TBC tab clear (at cursor pos.) ^[[g
19231 # TBI tab initialize ^[[N
19232 # TBS tab set (at cursor pos.) ^[p
19233 # PDS print data space ^[[0p
19234 # PHD print host data ^[[3p
19235 # PDT print data terminator ^[[<p
19236 # PRES print adapter reset ^[[2p
19237 # SSPR multi-part. reset ^[[<>u
19238 # SSP0 partition 0 set ^[[00u
19239 # SSP1 partition n format 1 ^[[PnPnSTRINGu
19240 # SSP2 partition n format 2 ^[[PnPnSTRINGu
19241 # SSP3 partition n format 3 ^[[PnPnu
19242 # ATR attribute (visual)
19245 # hide (blank) : ^[sH
19247 # inverse video : ^[sI
19252 # This covers the vip7800 and BQ3155-vip7800
19253 vip|Bull Questar 3155-7800,
19254 am, eslok, hs, km, mc5i, msgr, xenl, xon,
19255 cols#80, it#8, lines#24, vt#3, wsl#80,
19256 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
19257 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19258 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
19259 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
19260 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
19261 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
19262 is2=\E[00u\E[<>001001024080024080u\E[01u,
19263 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
19264 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
19265 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
19266 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
19267 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
19268 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
19269 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
19270 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
19271 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
19272 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
19273 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
19274 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
19275 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
19276 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
19277 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
19278 smul=\Es_, tbc=\E[N, tsl=\Ew,
19279 # normal screen, 8 bits, 132 columns terminal.
19280 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
19282 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
19283 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
19285 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
19286 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
19287 cols#132, lines#72, wsl#132,
19288 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
19293 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
19294 # that is smaller than the screen, and puts up a warning message
19295 # outside the window. Te erases the warning message, puts the
19296 # window back to be the whole screen, and puts the cursor at just
19297 # below the small window. I defined <cnorm> and <civis> to really turn
19298 # the cursor on and off, but I have taken this out since I don't
19299 # like the cursor being turned off when vi exits.
19300 cg7900|chromatics|chromatics 7900,
19303 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
19304 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
19305 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
19306 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
19307 rmso=\001C1\,\001c2\,,
19308 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
19309 smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
19311 #### Computer Automation
19314 ca22851|computer automation 22851,
19317 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
19318 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
19319 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
19324 # This entry has correct padding and the undocumented "ri" capability
19325 cyb83|xl83|cybernex xl-83,
19328 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
19329 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
19330 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
19331 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
19332 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
19333 cyb110|mdl110|cybernex mdl-110,
19336 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
19337 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
19338 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
19339 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
19340 ht=\011$<43>, ich1=\016A\035$<3.5>,
19341 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
19345 # Datapoint is gone. They used to be headquartered in Texas.
19346 # They created ARCnet, an Ethernet competitor that flourished for a while
19347 # in the early 1980s before 3COM got wise and cut its prices. The service
19348 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
19351 dp3360|datapoint|datapoint 3360,
19354 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
19355 ed=^_, el=^^, home=^], ind=^J,
19357 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
19358 # The Datapoint 8242 Workstation was sold at least between 1985
19359 # and 1989. To make the terminal work with this entry, press
19360 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
19361 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
19362 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
19363 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
19364 # fact unusable because the strings sent by the terminal conflict
19365 # with other keys).
19366 # The terminal is capable of displaying "box draw" characters.
19367 # For each graphic character you must send 2 ESC's (\E\E) followed
19368 # by a control character as follows:
19369 # character meaning
19370 # ========= =======
19373 # ctrl-G bottom tee
19376 # ctrl-J top left corner
19377 # ctrl-K top right corner
19378 # ctrl-L bottom left corner
19379 # ctrl-M bottom right corner
19380 # ctrl-N horizontal line
19381 # ctrl-O vertical line
19382 # Unfortunately this cannot be fitted into the termcap/terminfo
19383 # description scheme.
19384 dp8242|datapoint 8242,
19387 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
19388 cr=^M, cub1=^H, cud1=^J,
19389 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
19390 home=^U, ht=^I, il1=\E^T, ind=^C,
19391 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
19392 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
19393 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
19394 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
19395 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
19396 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
19397 smso=\E^E, smul=\E^F,
19398 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
19400 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
19402 # These entries are DEC's official terminfos for its older terminals.
19403 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
19404 # Engineering for more information. Updated terminfos and termcaps
19405 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
19411 bel=^G, cr=^M, cub1=^H, cud1=^J,
19415 bel=^G, cr=^M, cub1=^H, cud1=^J,
19419 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19420 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
19424 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
19425 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19426 el=\EK, ht=^I, ind=^J, ri=\EI,
19427 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
19428 vt61|vt-61|vt61.5|dec vt61,
19430 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
19431 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
19432 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
19433 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19436 # The gigi does standout with red!
19437 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
19438 gigi|vk100|dec gigi graphics terminal,
19441 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
19442 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19443 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
19444 el=\E[K, ht=^I, ind=^J,
19445 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
19446 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
19447 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
19448 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19449 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
19452 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
19453 # a PC differentiated from the IBM clones. It was a total, ludicrous,
19454 # grossly-overpriced failure (among other things, DEC's OS didn't include
19455 # a format program, so you had to buy pre-formatted floppies from DEC at
19456 # a hefty premium!).
19457 pro350|decpro|dec pro console,
19459 cols#80, it#8, lines#24,
19460 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19461 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
19462 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19463 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19464 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
19465 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
19466 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
19471 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
19472 dw2|decwriter|dw|decwriter II,
19475 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
19476 # \E(B Use U.S. character set (otherwise # => british pound !)
19477 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
19478 # \E[w 10 char/in pitch
19479 # \E[1;132 full width horizontal margins
19480 # \E[2g clear all tab stops
19482 # \E[66t 66 lines/page (for \f)
19483 # \E[1;66r full vertical page can be printed
19484 # \E[4g clear vertical tab stops
19485 # \E> disable alternate keypad mode (so it transmits numbers!)
19486 # \E[%i%p1%du set tab stop at column %d (origin == 1)
19487 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
19490 # The dw3 does standout with wide characters.
19492 dw3|la120|decwriter III,
19495 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
19496 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
19497 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
19498 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
19502 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
19503 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
19505 # These aren't official
19506 ln03|dec ln03 laser printer,
19509 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
19510 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
19512 ln03-w|dec ln03 laser printer 132 cols,
19514 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
19515 kcud1=^J, nel=^M^J, use=ln03,
19517 #### Delta Data (dd)
19520 # Untested. The cup sequence is hairy enough that it probably needs work.
19521 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
19522 # There are BSD-derived termcap entries floating around for this puppy
19523 # that are *certainly* wrong.
19524 delta|dd5000|delta data 5000,
19527 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
19528 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
19529 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
19531 #### Digital Data Research (ddr)
19534 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
19535 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
19537 cols#80, it#8, lines#24, vt#3,
19538 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
19539 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
19540 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
19541 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
19542 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
19543 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
19544 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
19545 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
19546 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
19547 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
19548 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
19551 #### Evans & Sutherland
19554 # Jon Leech <leech@cs.unc.edu> tells us:
19555 # The ps300 was the Evans & Sutherland Picture System 300, a high
19556 # performance 3D vector graphics system with a bunch of specialized hardware.
19557 # Approximate date of release was 1982 (early 80s, anyway), and it had several
19558 # evolutions including (limited) color versions such as the PS330C. PS300s
19559 # were effectively obsolete by the late 80s, replaced by raster graphics
19560 # systems, although specialized applications like molecular modelling
19561 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
19562 # are out of production, though of course E&S is very much alive (in 1996).
19563 # (ps300: changed ":pt@:" to "it@" -- esr)
19565 ps300|Picture System 300,
19568 rmso@, rmul@, smso@, smul@, use=vt100,
19570 #### General Electric (ge)
19573 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
19576 bel=^G, cr=^M, cud1=^J, ind=^J,
19578 #### Heathkit/Zenith
19581 # Here is a description of the H19 DIP switches:
19584 # 0-3 = baud rate as follows:
19589 # 0 1 0 1 1200 baud
19590 # 1 0 0 0 2400 baud
19591 # 1 0 1 0 4800 baud
19592 # 1 1 0 0 9600 baud
19593 # 1 1 0 1 19.2K baud
19595 # 4 = parity (0 = no parity)
19596 # 5 = even parity (0 = odd parity)
19597 # 6 = stick parity (0 = normal parity)
19598 # 7 = full duplex (0 = half duplex)
19601 # 0 = block cursor (0 = underscore cursor)
19602 # 1 = no key click (0 = keyclick)
19603 # 2 = wrap at end of line (0 = no wrap)
19604 # 3 = auto LF on CR (0 = no LF on CR)
19605 # 4 = auto CR on LF (0 = no CR on LF)
19606 # 5 = ANSI mode (0 = VT52 mode)
19607 # 6 = keypad shifted (0 = keypad unshifted)
19608 # 7 = 50Hz refresh (1 = 60Hz refresh)
19610 # Factory Default settings are as follows:
19612 # S401 1 0 0 0 1 1 0 0
19613 # S402 0 0 0 0 0 0 0 0
19614 # (h19: I added <rmam>/<smam> based on the init string;
19615 # also added empty <acsc> to suppress a tic warning -- esr)
19616 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
19617 OTbs, am, mir, msgr,
19618 cols#80, it#8, lines#24,
19619 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
19620 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
19621 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
19622 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
19623 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
19624 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
19625 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
19626 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
19627 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
19628 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
19629 h19-bs|heathkit w/keypad shifted,
19630 rmkx=\Eu, smkx=\Et, use=h19-b,
19631 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
19632 rmkx=\Eu, smkx=\Et, use=h19-u,
19633 # (h19: merged in <ip> from BSDI hp19-e entry>;
19634 # also added empty <acsc> to suppress a tic warning --esr)
19635 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
19636 # Tim tells us that:
19637 # I have an old Zenith-19 terminal at home that still gets a lot of use.
19638 # This terminal suffers from the same famous insert-mode padding lossage
19639 # that has been acknowledged for the Z29 terminal. Emacs is nearly
19640 # unusable on this box, since even a half-scroll up or down the window
19641 # causes flaming terminal death.
19643 # On the Z19, the only way I have found around this problem is to remove
19644 # the :al: and :dl: entries entirely. No amount of extra padding will
19645 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
19646 # makes Emacs a little slower, but it remains in the land of the living.
19648 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
19649 OTbs, am, eslok, hs, mir, msgr,
19650 cols#80, it#8, lines#24,
19651 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
19652 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19653 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
19654 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
19655 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19656 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
19657 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
19658 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19659 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
19660 h19-u|heathkit with underscore cursor,
19661 cnorm@, cvvis@, use=h19-b,
19662 h19-g|h19g|heathkit w/block cursor,
19663 cnorm=\Ex4, cvvis@, use=h19-b,
19664 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
19666 dl1=\EM, il1=\EL, use=h19,
19668 # The major problem with the Z29 is that it requires more padding than the Z19.
19670 # The problem with declaring an H19 to be synonymous with a Z29 is that
19671 # it needs more padding. It especially loses if a program attempts
19672 # to put the Z29 into insert mode and insert text at 9600 baud. It
19673 # even loses worse if the program attempts to insert tabs at 9600
19674 # baud. Adding padding to text that is inserted loses because in
19675 # order to make the Z29 not die, one must add so much padding that
19676 # whenever the program tries to use insert mode, the effective
19677 # rate is about 110 baud.
19679 # What program would want to put the terminal into insert mode
19680 # and shove stuff at it at 9600 baud you ask?
19682 # Emacs. Emacs seems to want to do the mathematically optimal
19683 # thing in doing a redisplay rather than the practical thing.
19684 # When it is about to output a line on top of a line that is
19685 # already on the screen, instead of just killing to the end of
19686 # the line and outputting the new line, it compares the old line
19687 # and the new line and if there are any similarities, it
19688 # constructs the new line by deleting the text on the old line
19689 # on the terminal that is already there and then inserting new
19690 # text into the line to transform it into the new line that is
19691 # to be displayed. The Z29 does not react kindly to this.
19693 # But don't cry for too long.... There is a solution. You can make
19694 # a termcap entry for the Z29 that says the Z29 has no insert mode.
19695 # Then Emacs cannot use it. "Oh, no, but now inserting into a
19696 # line will be really slow", you say. Well there is a sort of a
19697 # solution to that too. There is an insert character option on
19698 # the Z29 that will insert one character. Unfortunately, it
19699 # involves putting the terminal into ansi mode, inserting the
19700 # character, and changing it back to H19 mode. All this takes 12
19701 # characters. Pretty expensive to insert one character, but it
19702 # works. Either Emacs doesn't try to use its inserting hack when
19703 # it's only given an insert character ability or the Z29 doesn't
19704 # require padding with this (the former is probably more likely,
19705 # but I haven't checked it out).
19706 # (z29: added empty <acsc> to suppress a tic warning, merged in
19707 # status line capabilities from BRL entry --esr)
19708 z29|zenith29|z29b|zenith z29b,
19709 OTbs, OTpt, am, eslok, hs, mir, msgr,
19710 OTkn#10, cols#80, lines#24,
19711 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
19712 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
19713 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
19714 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
19715 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
19716 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
19717 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
19718 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
19719 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
19720 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
19721 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
19722 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19723 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
19724 # the world is stable. <rs1> causes the terminal to be reset to the state
19725 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
19726 # cursor, bc -> block cursor.
19727 # From: Mike Meyers
19728 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
19729 # looks vt100-compatible -- esr)
19730 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
19731 OTbs, OTpt, am, eslok, hs, mir, msgr,
19732 OTkn#10, cols#80, it#8, lines#24,
19733 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
19734 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19735 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
19736 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19737 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19738 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
19739 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
19740 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
19741 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
19742 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
19743 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
19744 mc0=\E#7, nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM,
19745 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
19746 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
19747 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
19748 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
19749 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
19750 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
19752 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
19753 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
19755 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
19756 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
19758 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
19759 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
19760 am, eslok, hs, mc5i, mir, msgr, xon,
19762 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
19763 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
19764 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
19765 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19766 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19767 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19768 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
19769 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
19770 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
19771 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
19772 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
19773 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
19774 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
19775 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
19776 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
19777 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
19778 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
19779 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19780 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
19782 # From: Brad Brahms <Brahms@USC-ECLC>
19783 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
19784 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
19785 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
19786 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
19787 OTbs, OTpt, mir, msgr,
19788 OTkn#10, cols#80, it#8, lines#24,
19789 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
19790 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
19791 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
19792 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
19793 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
19794 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
19795 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
19796 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
19797 smir=\E@, smso=\Ep,
19798 p19|h19-b with il1/dl1,
19799 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
19800 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
19801 # (ztx: removed duplicate :sr: -- esr)
19802 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
19803 OTbs, am, eslok, hs,
19804 cols#80, it#8, lines#24,
19805 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
19806 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19807 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
19808 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
19809 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
19810 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
19811 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
19812 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
19814 #### IMS International (ims)
19816 # There was a company called IMS International located in Carson City,
19817 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
19818 # bus/Z80 hardware and a line of terminals called Ultimas.
19821 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
19822 ims950-b|bare ims950 no init string,
19824 # (ims950: removed obsolete ":ko@:" -- esr)
19825 ims950|ims televideo 950 emulation,
19827 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19828 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
19829 # (ims950-rv: removed obsolete ":ko@:" -- esr)
19830 ims950-rv|ims tvi950 rev video,
19832 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
19833 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
19834 ims-ansi|ultima2|ultimaII|IMS Ultima II,
19836 cols#80, it#8, lines#24,
19837 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
19838 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
19839 ht=^I, if=/usr/share/tabset/vt100,
19840 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
19841 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
19842 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
19845 #### Intertec Data Systems
19847 # I think this company is long dead as of 1995. They made an early CP/M
19848 # micro called the "Intertec Superbrain" that was moderately popular,
19849 # then sank out of sight.
19852 superbrain|intertec superbrain,
19855 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
19856 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
19857 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
19858 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
19859 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
19860 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
19861 # and the reverse is actually true. Try it. -- esr)
19862 intertube|intertec|Intertec InterTube,
19865 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
19866 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
19867 ind=^J, rmso=\E0@, smso=\E0P,
19868 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
19869 # are typing and a command comes in, the keystrokes you type get interspersed
19870 # with the command and it messes up
19871 intertube2|intertec data systems intertube 2,
19873 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
19874 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
19875 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
19877 #### Ithaca Intersystems
19879 # This company made S100-bus personal computers long ago in the pre-IBM-PC
19880 # past. They used to be reachable at:
19882 # Ithaca Intersystems
19883 # 1650 Hanshaw Road
19884 # Ithaca, New York 14850
19886 # However, the outfit went bankrupt years ago.
19889 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
19890 # These entries were written (originally in termcap syntax) by Brian Yandell
19891 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
19892 # University of Wisconsin.
19894 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
19895 # removed <if=/usr/share/tabset/init.graphos> and
19896 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
19897 graphos|graphos III,
19899 cols#80, it#8, lines#24,
19900 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
19901 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19902 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19903 cuu=\E[%p1%dA, cuu1=\E[A,
19904 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
19905 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
19906 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19907 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
19908 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
19909 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
19910 smir=\E[4h, smso=\E[7m,
19911 graphos-30|graphos III with 30 lines,
19913 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
19917 # These people used to be reachable at:
19920 # 1393 Main Street,
19921 # Waltham, MA 02154
19922 # Vox: (617)-890-5796.
19924 # However, if you call that number today you'll get an insurance company.
19925 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
19926 # 26 Feb 1997 that says:
19928 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
19929 # for ~7 years. Modgraph still in business. Products are rugged laptop and
19930 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
19931 # panel-mount etc). I can be emailed at sonfour@aol.com
19933 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
19934 # dated 1984. According to the manual, it featured Tek 4010/4014
19935 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
19938 modgraph|mod24|modgraph terminal emulating vt100,
19941 cvvis=\E\^9;0s\E\^7;1s,
19942 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
19943 rf@, ri=\EM\E[K$<5/>, use=vt100,
19944 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
19945 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
19947 cols#80, it#8, lines#24,
19948 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
19949 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
19950 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
19951 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
19954 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
19955 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
19956 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
19957 # mark and using delete-to-killbuffer work correctly. However, we would
19958 # like normal mode of operation to be using a Modgraph with 48 line setting.
19959 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
19960 # the setting mark and delete-to-killbuffer results in the deletion of only
19961 # the line the mark is set on.
19962 # We've discovered that the delete-to-killbuffer works correctly
19963 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
19964 # the first line disappears but a ctrl-l shows that it did work
19966 modgraph48|mod|Modgraph w/48 lines,
19967 OTbs, OTpt, am, xenl,
19968 cols#80, it#8, lines#48, vt#3,
19969 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
19970 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
19971 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
19972 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
19973 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
19974 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19975 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
19976 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19977 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
19978 smso=\E[7m, smul=\E[4m,
19980 #### Morrow Designs
19982 # This was George Morrow's company. They started in the late 1970s making
19983 # S100-bus machines. They used to be reachable at:
19986 # 600 McCormick St.
19987 # San Leandro, CA 94577
19989 # but they're long gone now (1995).
19992 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
19993 # Jeff's specimen was dated June 1984.
19994 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
19995 mt70|mt-70|Morrow MD-70; native Morrow mode,
19996 am, mir, msgr, xon,
19997 cols#80, it#8, lines#24,
19998 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
19999 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
20000 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
20001 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
20002 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
20003 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
20004 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
20005 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
20006 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
20007 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
20008 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
20009 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
20010 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
20011 smul=\EG1, tbc=\E0, use=adm+sgr,
20016 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
20018 ex155|Motorola Exorterm 155,
20020 OTkn#5, OTug#1, cols#80, lines#24,
20021 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
20022 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
20023 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
20024 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
20025 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
20029 # This company is still around in 1995, manufacturing point-of-sale systems.
20031 omron|Omron 8025AG,
20034 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
20035 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
20036 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
20040 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
20041 # were competition for things like the Tektronics 4025.
20044 # Ramtek 6221 from BRL, probably by Doug Gwyn
20045 # The following SET-UP modes are assumed for normal operation:
20046 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
20047 # NEWLINE_OFF 80_COLUMNS
20048 # Other SET-UP modes may be set for operator convenience or communication
20049 # requirements; I recommend
20050 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
20051 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
20052 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
20053 # Note that the Control-E key is useless on this brain-damaged terminal. No
20054 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
20055 rt6221|Ramtek 6221 80x24,
20056 OTbs, OTpt, msgr, xon,
20057 OTkn#4, cols#80, it#8, lines#24, vt#3,
20058 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
20059 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
20060 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
20061 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
20062 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
20063 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
20064 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20065 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
20066 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
20067 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
20068 rmso=\E[m, rmul=\E[m,
20069 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
20070 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
20071 smul=\E[4m, tbc=\E[3g,
20072 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
20073 rt6221-w|Ramtek 6221 160x48,
20074 cols#160, lines#48,
20075 ll=\E[48;1H, use=rt6221,
20080 # RCA VP3301 or VP3501
20081 rca|rca vp3301/vp3501,
20084 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20085 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
20091 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
20092 # The following SET-UP modes are assumed for normal operation:
20093 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
20094 # ONLINE ANSI CURSOR_VISIBLE
20095 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
20096 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
20097 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
20098 # For use with graphics software, all graphics modes should be set to factory
20099 # default. Other SET-UP modes may be set for operator convenience or
20100 # communication requirements. No delays are specified; use "stty ixon -ixany"
20101 # to enable DC3/DC1 flow control!
20102 # I commented out the scrolling capabilities since they are too slow.
20103 hirez100|Selanar HiREZ-100,
20104 OTbs, OTpt, mir, msgr, xon,
20105 OTkn#4, cols#80, it#8, lines#48, vt#3,
20106 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
20107 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
20108 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20109 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
20110 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20111 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
20112 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
20113 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
20114 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
20115 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
20116 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
20117 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
20118 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
20119 smul=\E[4m, tbc=\E[3g,
20120 hirez100-w|Selanar HiREZ-100 in 132-column mode,
20121 cols#132, use=hirez100,
20126 # From University of Wisconsin
20127 vsc|Signetics Vsc Video driver by RMC,
20129 cols#80, it#8, lines#26,
20130 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
20131 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
20132 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
20133 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
20137 # Alan Frisbie <frisbie@flying-disk.com> writes:
20139 # As you may recall, the Soroc logo consisted of their name,
20140 # with the letter "S" superimposed over an odd design. This
20141 # consisted of a circle with a slightly smaller 15 degree (approx.)
20142 # wedge with rounded corners inside it. The color was sort of
20143 # a metallic gold/yellow.
20145 # If I had been more of a beer drinker it might have been obvious
20146 # to me, but it took a clue from their service department to make
20147 # me exclaim, "Of course!" The circular object was the top of
20148 # a beer can (the old removable pop-top style) and "Soroc" was an
20149 # anagram for "Coors".
20151 # I can just imagine the founders of the company sitting around
20152 # one evening, tossing back a few and trying to decide what to
20153 # call their new company and what to use for a logo.
20156 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
20157 soroc120|iq120|soroc|soroc iq120,
20158 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
20159 kcuf1=^L, kcuu1=^K, use=adm3a,
20160 soroc140|iq140|soroc iq140,
20163 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20164 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
20165 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
20166 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
20167 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
20168 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
20169 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
20171 #### Southwest Technical Products
20173 # These guys made an early personal micro called the M6800.
20174 # The ct82 was probably its console terminal.
20177 # (swtp: removed obsolete ":bc=^D:" -- esr)
20178 swtp|ct82|southwest technical products ct82,
20181 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
20182 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
20183 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
20184 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
20185 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
20189 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
20191 # Synertek used to make ICs, various 6502-based single-board process
20192 # control and hobbyist computers, and assorted peripherals including a
20193 # series of small inexpensive terminals (I think they were one of the
20194 # first to have a "terminal-on-a-keyboard", where the terminal itself
20195 # was only slightly larger than the keyboard).
20197 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
20198 # was a 40x24 terminal that could connect to a standard TV through a
20199 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
20200 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
20201 # I have a KTM-2/80 still in working order. The KTM-2s had fully
20202 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
20203 # ROM and 2 ROMs as character generators. They were incredibly simple,
20204 # and I've never had any problems with mine (witness the fact that mine
20205 # was made in 1981 and is still working great... I've blown the video
20206 # output transistor a couple of times, but it's a 2N2222 :-)
20208 # The KTM-3 (which is what is listed in the terminfo file) was their
20209 # attempt at putting a KTM-2 in a box (and some models came with a
20210 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
20211 # control and escape sequences are very different. The KTM-3 was always
20212 # real broken, at least according to the folks I've talked to about it.
20214 # The padding in the entry is probably off--these terminals were very
20215 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
20216 # anyone with any sanity replaced the ROMs with something that provided
20217 # a reasonable subset of VT100 functionality, since the usual ROMs were
20218 # obviously very primitive... oh, you could get an upgraded ROM from
20219 # Synertek for some incredible amount of money, but what hacker with an
20220 # EPROM burner would do that? :)
20222 # Sorry I don't have any contact info; I believe they were located in
20223 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
20224 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
20225 # business these days.
20228 # Tested, seems to work fine with vi.
20229 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
20232 clear=^Z, cub1=^H, cuf1=^L,
20233 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
20235 #### Tab Office Products
20237 # TAB Products Co. - Palo Alto, California
20238 # Electronic Office Products,
20239 # 1451 California Avenue 94304
20241 # I think they're out of business.
20244 # The tab 132 uses xon/xoff, so no padding needed.
20245 # <smkx>/<rmkx> have nothing to do with arrow keys.
20246 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
20247 # Seems to be no way to get rid of status line.
20248 # The manual for this puppy was dated June 1981. It claims to be VT52-
20249 # compatible but looks more vt100-like.
20250 tab132|tab|tab132-15|tab 132/15,
20252 OTdN@, cols#80, lines#24, lm#96,
20253 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
20254 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
20255 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
20256 tab132-w|tab132 in wide mode,
20258 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
20259 tab132-rv|tab132 in reverse-video mode,
20260 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
20261 tab132-w-rv|tab132 in reverse-video/wide mode,
20262 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
20267 # Research Incorporated
20268 # 6425 Flying Cloud Drive
20269 # Eden Prairie, MN 55344
20270 # Vox: (612)-941-3300
20272 # The Teleray terminals were all discontinued in 1992-93. RI still services
20273 # and repairs these beasts, but no longer manufactures them. The Teleray
20274 # people believe that all the types listed below are very rare now (1995).
20275 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
20276 # Model 100) that were ANSI-compatible.
20278 # Note two things called "teleray". Reorder should move the common one
20279 # to the front if you have either. A dumb teleray with the cursor stuck
20280 # on the bottom and no obvious model number is probably a 3700.
20283 t3700|dumb teleray 3700,
20286 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
20287 t3800|teleray 3800 series,
20289 cols#80, it#8, lines#24,
20290 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20291 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
20292 home=\EH, ht=^I, ind=^J, ll=\EY7\s,
20293 t1061|teleray|teleray 1061,
20294 OTbs, am, km, xhp, xt,
20295 cols#80, it#8, lines#24, xmc#1,
20296 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20297 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
20298 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
20299 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
20300 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
20301 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
20302 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
20304 t1061f|teleray 1061 with fast PROMs,
20305 dl1=\EM, il1=\EL, ip@, use=t1061,
20306 # "Teleray Arpa Special", officially designated as
20307 # "Teleray Arpa network model 10" with "Special feature 720".
20308 # This is the new (1981) fast microcode updating the older "arpa" proms
20309 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
20310 # converts the keypad to programmable function keys, and has other goodies.
20311 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
20312 # programs handle such lossage properly.
20313 # Note: this is NOT the old termcap's "t1061f with fast proms."
20314 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
20315 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
20316 t10|teleray 10 special,
20318 cols#80, it#8, lines#24, xmc#2,
20319 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
20320 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
20321 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
20322 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
20324 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
20325 # back/forth words. Put the function keys (f1-f10) where they can be
20326 # found, and turn off the other magic keys along the top row, except
20327 # for line/local. Do the magic appropriate to make the page shifts work.
20328 # Also toggle ^S/^Q for those of us who use Emacs.
20330 am, da, db, mir, xhp, xt,
20332 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
20333 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
20334 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
20335 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
20336 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
20337 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
20338 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
20339 smso=\E[7m, smul=\E[4m,
20341 #### Texas Instruments (ti)
20344 # The Silent 700 was so called because it was built around a quiet thermal
20345 # printer. It was portable, equipped with an acoustic coupler, and pretty
20346 # neat for its day.
20347 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
20350 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
20353 # Texas Instruments 916 VDT 7 bit control mode
20355 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
20357 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
20358 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
20359 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
20360 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
20361 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
20362 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
20363 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
20364 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
20365 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
20366 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
20367 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
20368 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
20369 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
20370 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
20373 # Texas Instruments 916 VDT 8 bit control mode
20375 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
20376 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
20377 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
20378 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
20379 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
20380 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
20381 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
20383 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
20385 ti916-132|Texas Instruments 916 VDT vt220 132 column,
20386 cols#132, use=ti916,
20388 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
20390 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
20391 cols#132, use=ti916-8,
20392 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
20394 cols#80, it#8, lines#24,
20395 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20396 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
20397 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
20398 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
20399 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20400 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20401 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
20402 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
20403 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
20404 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
20405 smul=\E[4m, tbc=\E[3g,
20406 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
20408 cols#80, it#8, lines#24,
20409 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20410 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
20411 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
20412 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
20413 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
20414 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20415 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
20416 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
20417 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
20418 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
20419 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20420 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
20421 cols#132, use=ti924,
20422 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
20423 cols#132, use=ti924-8,
20424 ti931|Texas Instruments 931 VDT,
20427 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
20428 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
20429 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
20430 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
20431 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20432 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
20433 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
20434 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
20435 sgr0=\E4@, smso=\E4A, smul=\E4D,
20436 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
20437 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
20438 # (ti926-8: I corrected this from the broken SCO entry -- esr)
20439 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
20440 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
20441 ti_ansi|basic entry for ti928,
20442 am, bce, eo, xenl, xon,
20443 colors#8, cols#80, it#8, lines#25, pairs#64,
20444 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
20445 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
20446 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
20447 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
20448 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
20449 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
20450 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
20451 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
20452 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
20453 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
20454 smso=\E[7m, smul=\E[4m,
20456 # 928 VDT 7 bit control mode
20458 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
20459 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
20460 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
20461 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
20462 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20463 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
20465 # 928 VDT 8 bit control mode
20467 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
20468 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
20469 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
20470 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
20471 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
20472 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
20473 kpp=\233T, kprt=\23335~, use=ti_ansi,
20478 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
20479 # had just <smso>=\EG6 which I think means standout was supposed to be
20480 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
20481 # <invis> might work-- esr)
20482 zen30|z30|zentec 30,
20485 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
20486 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
20487 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
20488 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
20489 smul@, use=adm+sgr,
20490 # (zen50: this had extension capabilities
20491 # :BS=^U:CL=^V:CR=^B:
20492 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
20493 # which were also in the original entry -- esr)
20494 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
20495 zen50|z50|zentec zephyr,
20497 cols#80, lines#24, xmc#1,
20498 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
20499 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
20500 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
20501 rmul@, smul@, use=adm+sgr,
20503 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
20504 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
20507 blink=\EM", clear=\EH\EJ, cnorm=\EP,
20508 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
20509 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
20510 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
20511 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
20512 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
20513 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
20514 smso=\EM$, smul=\EM0,
20516 ######## OBSOLETE UNIX CONSOLES
20519 #### Apollo consoles
20521 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
20522 # labeled HP700s now.
20525 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
20526 apollo|apollo console,
20529 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
20530 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
20531 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
20532 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
20533 smso=\ES, smul=\EU, vpa=\EO+\s,
20535 # We don't know whether or not the apollo guys replicated DEC's firmware bug
20536 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
20537 # both these capabilities.
20538 apollo_15P|apollo 15 inch display,
20539 rmir@, smir@, use=vt132,
20540 apollo_19L|apollo 19 inch display,
20541 rmir@, smir@, use=vt132,
20542 apollo_color|apollo color display,
20543 rmir@, smir@, use=vt132,
20547 # This actually describes the generic SVr4 display driver for Intel boxes.
20548 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
20549 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
20550 att6386|at386|386at|AT&T WGS 6386 console,
20552 cols#80, it#8, lines#25,
20553 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
20554 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
20555 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
20556 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
20557 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
20558 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
20559 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
20560 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
20561 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
20562 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
20563 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20564 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
20565 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
20566 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
20567 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
20568 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
20570 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
20571 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
20572 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
20573 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
20574 pc6300plus|AT&T 6300 plus,
20577 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
20578 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
20579 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
20580 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
20581 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
20582 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
20583 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
20584 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
20585 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
20586 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20588 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
20590 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
20591 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
20592 # is broken. All the special key sequences are broken, making it unusable
20593 # with Emacs. The problem stems from the following:
20595 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
20596 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
20597 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
20598 # uses resizable terminal windows, but the bundled terminal program always
20599 # uses an 80x24 window (and doesn't support seem to support a 132-column
20602 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
20603 # library which was a superset of SVr3.5 curses (called tam, for "terminal
20604 # access method".) tam includes support for real, overlapping windows,
20605 # onscreen function key labels, and bitmap graphics. But since the primary
20606 # user interface on the UNIX PC was a GUI program (ua, for "user
20607 # assistant",) and remote administration was considered important for the
20608 # machine, tam also supported VT100-compatible terminals attached to the
20609 # serial port or used across the StarLan network. To simulate the extra keys
20610 # not present on a VT100, users could press ESC and a two-letter sequence,
20611 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
20612 # however, were not the same as those sent by the actual Undo key. The
20613 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
20614 # (If you're interested in adding some of the tam calls to ncurses, btw, I
20615 # have the full documentation and several programs which use tam. It also
20616 # used an extended terminfo format to describe key sequences, special
20617 # highlighting modes, etc.)
20619 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
20620 # there are two sequences for every key-modifier combination (local keyboard
20621 # sequence and remote "VT100" sequence.) But I doubt many people are trying
20622 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
20623 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
20624 # seem to have been built from the manual describing the VT100 sequences.
20625 # This means it doesn't work for a real live UNIX PC.
20627 # FONTS: The UNIX PC also has a strange interpretation of "alternate
20628 # character set". Rather than the VT100 graphics you might expect, it allows
20629 # up to 8 custom fonts to be loaded at any given time. This means that
20630 # programs expecting VT100 graphics will usually be disappointed. For this
20631 # reason I have disabled the smacs/rmacs sequences, but they could easily be
20632 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
20633 # manpage), should you wish to do so:
20635 # SGR10 - Select font 0 - ESC [ 10 m or SO
20636 # SGR11 - Select font 1 - ESC [ 11 m or SI
20637 # SGR12 - Select font 2 - ESC [ 12 m
20639 # SGR17 - Select font 7 - ESC [ 17 m
20641 # Graphics for line drawing are not reliably found at *any* character
20642 # location because the UNIX PC has dynamically reloadable fonts. I use font
20643 # 0 for regular text and font 1 for italics, but this is by no means
20644 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
20646 # MISC: The cursor visible/cursor invisible sequences were swapped in the
20647 # distributed terminfo.
20649 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
20650 # the UNIX PC terminfo entry. The modified version works great with Lynx,
20651 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
20652 # attached by serial cable. In Emacs, even the Undo key works, and many
20653 # applications can now use the F1-F8 keys.
20656 # Terminfo entry for the AT&T Unix PC 7300
20657 # from escape(7) in Unix PC 7300 Manual.
20658 # Somewhat similar to a vt100-am (but different enough
20659 # to redo this from scratch.)
20661 # /***************************************************************
20663 # * FONT LOADING PROGRAM FOR THE UNIX PC
20665 # * This routine loads a font defined in the file ALTFONT
20666 # * into font memory slot #1. Once the font has been loaded,
20667 # * it can be used as an alternative character set.
20669 # * The call to ioctl with the argument WIOCLFONT is the key
20670 # * to this routine. For more information, see window(7) in
20671 # * the PC 7300 documentation.
20672 # ***************************************************************/
20673 # #include <string.h> /* needed for strcpy call */
20674 # #include <sys/window.h> /* needed for ioctl call */
20675 # #define FNSIZE 60 /* font name size */
20676 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
20678 # * The file /usr/lib/wfont/special.8.ft comes with the
20679 # * standard PC software. It defines a graphics character set
20680 # * similar to that of the Teletype 5425 terminal. To view
20681 # * this or other fonts in /usr/lib/wfont, use the command
20682 # * cfont <filename>. For further information on fonts see
20683 # * cfont(1) in the PC 7300 documentation.
20686 # struct altfdata /* structure for alt font data */
20688 # short altf_slot; /* memory slot number */
20689 # char altf_name[FNSIZE]; /* font name (file name) */
20693 # int wd; /* window in which altfont will be */
20694 # struct altfdata altf;
20695 # altf.altf_slot=1;
20696 # strcpy(altf.altf_name,ALTFONT);
20697 # for (wd =1; wd < 12; wd++) {
20698 # ioctl(wd, WIOCLFONT,&altf);
20702 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
20703 # they're confirmed by the man page for the System V display---esr)
20705 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
20707 cols#80, it#8, lines#24,
20708 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
20709 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
20710 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
20711 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
20712 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
20713 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
20714 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
20715 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
20716 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
20717 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
20718 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
20719 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
20720 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
20721 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
20722 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
20723 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
20724 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
20725 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
20726 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
20727 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
20728 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
20729 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
20732 #### Convergent Technology
20734 # Burroughs bought Convergent shortly before it merged with Univac.
20735 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
20736 # from 1991 or earlier).
20739 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
20740 # (aws: removed unknown :dn=^K: -- esr)
20741 aws|Convergent Technologies AWS workstation under UTX and Xenix,
20743 OTug#0, cols#80, lines#28, xmc#0,
20744 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
20745 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
20746 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
20747 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
20748 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
20749 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
20751 awsc|Convergent Technologies AWS workstation under CTOS,
20753 OTug#0, cols#80, lines#24, xmc#0,
20754 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
20755 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
20756 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
20757 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
20763 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
20764 # The digital uVax II's had a graphic display called a qdss. It was
20765 # supposed to be a high performance graphic accelerator, but it was
20766 # late to market and barely appeared before faster dumb frame buffers
20767 # appeared. I have only used this display while running X11. However,
20768 # during bootup, it was in text mode, and probably had a terminal emulator
20769 # within it. And that is what your termcap entry is for. In graphics
20770 # mode the screen size is 1024x864 pixels.
20771 qdss|qdcons|qdss glass tty,
20773 cols#128, lines#57,
20774 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
20775 cup=\E=%p1%c%p2%c, cuu1=^K,
20777 #### Fortune Systems consoles
20779 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
20780 # in their day; I (esr) used one myself for a year or so around 1984.
20781 # They had no graphics, though, and couldn't compete against Suns and
20785 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
20786 # (This had extension capabilities
20787 # :rv=\EH:re=\EI:rg=0:GG=0:\
20788 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
20789 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
20790 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
20791 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
20792 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
20793 # to force both magic cookie glitches off. Once upon a time, I
20794 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
20795 # function keys; thus the "Al" value for HM was certainly an error. I renamed
20796 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
20797 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
20798 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
20799 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
20800 fos|fortune|Fortune system,
20803 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
20804 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
20805 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
20806 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
20807 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
20808 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
20809 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
20810 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
20811 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
20812 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
20813 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
20814 smso=^\H`, smul=^\HP,
20816 #### Masscomp consoles
20818 # Masscomp has gone out of business. Their product line was purchased by
20819 # comany in Georgia (US) called "XS International", parts and service may
20820 # still be available through them.
20823 # (masscomp: ":MT:" changed to ":km:"; -- esr)
20824 masscomp|masscomp workstation console,
20826 cols#80, it#8, lines#24,
20827 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
20828 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20829 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
20830 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
20831 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
20832 masscomp1|masscomp large screen version 1,
20833 cols#104, lines#36, use=masscomp,
20834 masscomp2|masscomp large screen version 2,
20835 cols#64, lines#21, use=masscomp,
20840 # OSF/1 1.1 Snapshot 2
20841 pmcons|pmconsole|PMAX console,
20843 cols#128, lines#57,
20844 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
20845 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
20846 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
20848 #### Other consoles
20849 # The following is a version of the ibm-pc entry distributed with PC/IX,
20850 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
20851 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
20852 # (the former is untrue, and the latter failed under UCB/man); standout and
20853 # underline modes have been added. Note: this entry describes the "native"
20854 # capabilities of the PC monochrome display, without ANY emulation; most
20855 # communications packages (but NOT PC/IX connect) do some kind of emulation.
20856 pcix|PC/IX console,
20859 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
20860 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
20861 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
20864 # (ibmpcx: this entry used to be known as ibmx.
20865 # It formerly included the following extension capabilities:
20866 # :GC=b:GL=v:GR=t:RT=^J:\
20867 # :GH=\E[196g:GV=\E[179g:\
20868 # :GU=\E[193g:GD=\E[194g:\
20869 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
20870 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
20871 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
20872 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
20873 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
20874 # what was there before. -- esr)
20875 ibmpcx|xenix|ibmx|IBM PC xenix console display,
20878 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
20879 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
20880 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
20881 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
20882 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
20883 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
20885 ######## OTHER OBSOLETE TYPES
20887 # These terminals are *long* dead -- these entries are retained for
20888 # historical interest only.
20891 #### Obsolete non-ANSI software emulations
20894 # CTRM terminal emulator
20895 # 1. underlining is not allowed with colors: first, is is simulated by
20896 # black on white, second, it disables background color manipulations.
20897 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
20898 # so we have to save their status in the static registers A, B and H
20899 # respectively, to be able to restore them when color changes
20900 # (because any color change turns off ALL attributes)
20901 # 3. <bold> and <rev> sequences alternate modes,
20902 # rather than simply entering them. Thus we have to check the
20903 # static register B and H to determine the status, before sending the
20905 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
20906 # and then reset colors
20907 # 5. implementation of the protect mode would badly penalize the performance.
20908 # we would have to use \E&bn sequence to turn off colors (as well as all
20909 # other attributes), and keep the status of protect mode in yet another
20910 # static variable. If someone really needs this mode, they would have to
20911 # create another terminfo entry.
20912 # 6. original color-pair is white on black.
20913 # store the information about colors into static registers
20914 # 7. set foreground color. it performs the following steps.
20915 # 1) turn off all attributes
20916 # 2) turn on the background and video attributes that have been turned
20917 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
20918 # 3) turn on foreground attributes
20919 # 4) store information about foreground into U,V,W static registers
20920 # 8. turn on background: similar to turn on foreground above
20921 ctrm|C terminal emulator,
20923 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
20924 pairs#63, pb#19200, vt#6,
20925 bel=^G, blink=\E&dA%{1}%PA,
20926 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
20927 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
20928 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
20929 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
20930 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
20931 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
20932 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
20933 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
20934 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
20935 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
20936 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
20937 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
20938 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
20939 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
20940 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
20942 # gs6300 - can't use blue foreground, it clashes with underline;
20943 # it's simulated with cyan
20944 # Bug: The <op> capability probably resets attributes.
20945 # (gs6300: commented out <rmln> (no <smln>) --esr)
20946 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
20947 am, bce, msgr, xon,
20948 colors#8, cols#80, it#8, lines#24, pairs#63,
20949 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20950 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
20951 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
20952 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
20953 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20954 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
20955 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
20956 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
20957 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
20958 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
20959 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
20960 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
20961 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
20962 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
20964 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
20965 # MS-Kermit with Heath-19 emulation mode enabled
20966 # (h19k: changed ":pt@:" to ":it@"
20967 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
20972 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
20973 # Software (formerly Peripherals Computers & Supplies, Inc) of
20974 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
20975 # also be reached at support@synergy.com.
20976 versaterm|versaterm vt100 emulator for the macintosh,
20978 cols#80, it#8, lines#24,
20979 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
20980 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
20981 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
20982 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
20983 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
20984 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
20985 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
20986 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
20987 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
20988 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
20989 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
20990 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
20993 # From: Rick Thomas <ihnp4!btlunix!rbt>
20994 # (xtalk: I added <rmam>/<smam> based on the init string.
20995 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
20996 am, mir, msgr, xon,
20997 cols#80, it#8, lines#24, vt#3, xmc#1,
20998 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20999 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
21000 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
21001 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
21002 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
21003 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
21004 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
21005 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
21006 rmkx=\E[?1l\E>, rmso=\E[m\s,
21007 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
21008 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
21009 tbc=\E[3g, use=vt100+fnkeys,
21011 # The official PC terminal emulator program of the AT&T Product Centers.
21012 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
21013 simterm|attpc running simterm,
21016 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
21017 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
21018 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
21019 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
21021 #### Daisy wheel printers
21023 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
21024 # wheel terminals. These are now largely obsolete.
21027 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
21028 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
21031 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
21032 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
21033 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
21035 is2=\r \E9, use=diablo1620,
21036 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
21037 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
21038 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
21040 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
21042 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
21044 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
21045 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
21047 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
21048 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
21049 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
21050 # If no tab is set or the terminal's in a bad mood, it glitches the screen
21051 # around all of memory. Note that return puts a blank ("a return character")
21052 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
21053 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
21054 # curses won't work (some old BSD versions) because it doesn't clear this bit,
21055 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
21056 # I have been unable to get tabs set in all 96 lines - it always leaves at
21057 # least one line with no tabs in it, and once you tab through that line,
21058 # it completely weirds out.
21059 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
21062 cols#80, lines#24, lm#96,
21063 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
21064 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
21065 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
21066 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
21067 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
21071 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
21072 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
21073 gsi|mystery gsi terminal,
21076 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
21078 aj830|aj832|aj|anderson jacobson,
21080 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
21082 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
21083 aj510|Anderson-Jacobson model 510,
21086 clear=^L, cub1=^H, cuf1=\EX,
21087 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
21088 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
21089 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
21090 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
21091 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
21093 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
21094 # This is incomplete, but it's a start.
21095 nec5520|nec|spinwriter|nec 5520,
21098 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
21099 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
21101 qume5|qume|Qume Sprint 5,
21104 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
21105 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
21106 # I suspect the xerox 1720 is the same as the diablo 1620.
21107 xerox1720|x1720|x1750|xerox 1720,
21110 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
21113 #### Miscellaneous obsolete terminals, manufacturers unknown
21115 # If you have any information about these (like, a manufacturer's name,
21116 # and a date on the serial-number plate) please send it!
21118 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
21121 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
21122 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
21125 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
21126 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
21127 kf4=\E8, rmso=\Em^C, smso=\Em^L,
21128 cops10|cops|cops-10|cops 10,
21131 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
21132 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
21133 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
21135 # (d132: removed duplicate :ic=\E5:,
21136 # merged in capabilities from a BRL entry -- esr)
21137 d132|datagraphix|datagraphix 132a,
21140 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
21141 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
21142 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
21143 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
21144 # The d800 was an early portable terminal from c.1984-85 that looked a lot
21145 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
21146 # mode (which is what this entry looks like) and several other lesser-known
21149 OTbs, am, da, db, msgr, xhp,
21150 cols#80, it#8, lines#24,
21151 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
21152 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
21153 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
21154 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
21155 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
21156 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
21157 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
21158 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
21159 digilog|digilog 333,
21162 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
21164 # The DWK was a terminal manufactured in the Soviet Union c.1986
21165 dwk|dwk-vt|dwk terminal,
21167 cols#80, it#8, lines#24,
21168 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
21169 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
21170 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
21171 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
21172 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
21173 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
21174 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
21175 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
21176 sgr0=\EX, smacs=\EF, smso=\ET,
21177 env230|envision230|envision 230 graphics terminal,
21179 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
21180 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
21181 sgr0=\E[0m$<2>, smacs@, use=vt100,
21182 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
21183 # coupler attached, the whole rig fitting in a suitcase and more or less
21184 # portable. Hot stuff for c.1977 :-) -- esr
21185 ep48|ep4080|execuport 4080,
21188 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
21189 ep40|ep4000|execuport 4000,
21190 cols#136, use=ep4080,
21191 # Adam Thompson <athompso@pangea.ca> tells us:
21192 # Informer series - these are all portable units, resembling older
21193 # automatic bread-baking machines. The terminal looks like a `clamshell'
21194 # design, but isn't. The structure is similar to the Direct terminals,
21195 # but only half the width. The entire unit is only about 10" wide.
21196 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
21197 # keyboard. All the keys are crammed together, much like some laptop
21198 # PCs today, but perhaps less well organized...all these units have a
21199 # bewildering array of plugs on the back, including a built-in modem.
21200 # The 305 was a color version of the 304; the 306 and 307 were mono and
21201 # color terminals built for IBM bisync protocols.
21202 # From: Paul Leondis <unllab@amber.berkeley.edu>
21203 ifmr|Informer D304,
21206 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
21207 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
21208 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
21210 # Entry largely based on wy60 and has the features of wy60ak.
21211 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
21212 am, bw, hs, km, mir, msgr, ul, xon,
21213 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
21214 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
21215 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
21216 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
21217 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
21218 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
21219 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
21221 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
21222 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
21223 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
21224 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
21225 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
21226 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
21227 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
21228 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
21229 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
21230 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
21231 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
21232 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
21233 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
21234 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
21235 rs3=\EwG\Ee($<150>,
21236 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
21237 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
21238 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
21239 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
21240 uc=\EG8\EG0, use=adm+sgr,
21241 teletec|Teletec Datascreen,
21244 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
21246 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
21247 # This description is for the LANPAR Technologies VISION 3220
21248 # terminal from 1984/85. The function key definitions k0-k5 represent the
21249 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
21250 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
21252 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
21253 # I had a couple of scopes (3221) like this once where I used to work, around
21254 # the 1987 time frame if memory serves me correctly. These scopes were made
21255 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
21256 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
21257 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
21258 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
21259 # (3221) cost about $1500 each, and one was always broken -- had to be sent
21260 # back to the shop for repairs.
21261 # The only real advantage these scopes had over the VT-240's were:
21262 # 1) They were faster in the Regis display, or at least the ones I did
21263 # 2) They had a handy debugging feature where you could split-screen the
21264 # scope, the graphics would appear on the top, and the REGIS commands would
21265 # appear on the bottom. I don't remember the VT-240s being able to do that.
21266 # I would swear that LANPAR Technologies was in MA someplace, but since I
21267 # don't work at the same place anymore, and those terminals and manuals were
21268 # long since junked, I cannot be any more sure than that.
21270 # (v3220: removed obsolete ":kn#10:",
21271 # I added <rmam>/<smam> based on the init string -- esr)
21272 v3220|LANPAR Vision II model 3220/3221/3222,
21273 OTbs, am, mir, xenl,
21274 cols#80, it#8, lines#24,
21275 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
21276 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
21277 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
21278 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
21279 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
21280 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
21281 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
21282 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
21283 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
21284 ######## ICH/ICH1 VERSUS RMIR/SMIR
21286 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
21287 # are present; the symptom is doubled characters in an update using insert.
21288 # These applications are technically correct; in both 4.3BSD termcap and
21289 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
21290 # unless the terminal needs both. To my knowledge, no terminal still in this
21291 # file requires both other than the very obsolete dm2500.
21293 # For ncurses-based applications this is not a problem, as ncurses uses
21294 # one or the other as appropriate but never mixes the two. Therefore we
21295 # have not corrected entries like `linux' and `xterm' that specify both.
21296 # If you see doubled characters from these, use the linux-nic and xterm-nic
21297 # entries that suppress ich/ich1. And upgrade to ncurses!
21300 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
21302 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
21303 # ECMA-48 standards are said to be almost identical, but are not the same
21304 # as X3.64 (though for practical purposes they are close supersets of it).
21306 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
21307 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
21308 # Coded Character Sets"), include your snail-mail address, and you should
21309 # receive the document in due course. Don't expect an email acknowledgement.
21311 # Related standards include "X3.4-1977: American National Standard Code for
21312 # Information Interchange" (the ASCII standard) and "X3.41.1974:
21313 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
21314 # American National Standard for Information Interchange." I believe (but
21315 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
21319 #### VT100/ANSI/ECMA-48
21321 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
21322 # and ECMA-48 Control Functions for Coded Character Sets.
21324 # Much of the content of this comment is adapted from a table prepared by
21325 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
21326 # discussion of some terminfo-related issues, and updates to capture ECMA-48
21327 # have been added. Control functions described in ECMA-48 only are tagged
21328 # with * after their names.
21330 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
21331 # sequences. In the main table, \E stands for an escape (\033) character,
21332 # SPC for space. Pn stands for a single numeric parameter to be inserted
21333 # in decimal ASCII. Ps stands for a list of such parameters separated by
21334 # semicolons. Parameter meanings for most parametrized sequences are
21335 # decribed in the notes.
21337 # Sequence Sequence Parameter or
21338 # Mnemonic Name Sequence Value Mode terminfo
21339 # -----------------------------------------------------------------------------
21340 # APC Applicatn Program Command \E _ - Delim -
21341 # BEL Bell * ^G - - bel
21342 # BPH Break Permitted Here * \E B - * -
21343 # BS Backpace * ^H - EF -
21344 # CAN Cancel * ^X - - - (A)
21345 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
21346 # CCH Cancel Previous Character \E T - - -
21347 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
21348 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
21349 # CMD Coding Method Delimiter * \E
21350 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
21351 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
21352 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
21353 # CSI Control Sequence Intro \E [ - Intro -
21354 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
21355 # CUB Cursor Backward \E [ Pn D 1 eF cub
21356 # CUD Cursor Down \E [ Pn B 1 eF cud
21357 # CUF Cursor Forward \E [ Pn C 1 eF cuf
21358 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
21359 # CUU Cursor Up \E [ Pn A 1 eF cuu
21360 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
21361 # DA Device Attributes \E [ Pn c 0 - -
21362 # DAQ Define Area Qualification \E [ Ps o 0 - -
21363 # DCH Delete Character \E [ Pn P 1 eF dch
21364 # DCS Device Control String \E P - Delim -
21365 # DL Delete Line \E [ Pn M 1 eF dl
21366 # DLE Data Link Escape * ^P - - -
21367 # DMI Disable Manual Input \E \ - Fs -
21368 # DSR Device Status Report \E [ Ps n 0 - - (I)
21369 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
21370 # EA Erase in Area \E [ Ps O 0 eF - (J)
21371 # ECH Erase Character \E [ Pn X 1 eF ech
21372 # ED Erase in Display \E [ Ps J 0 eF ed (J)
21373 # EF Erase in Field \E [ Ps N 0 eF -
21374 # EL Erase in Line \E [ Ps K 0 eF el (J)
21375 # EM End of Medium * ^Y - - -
21376 # EMI Enable Manual Input \E b Fs -
21377 # ENQ Enquire ^E - - -
21378 # EOT End Of Transmission ^D - * -
21379 # EPA End of Protected Area \E W - - - (K)
21380 # ESA End of Selected Area \E G - - -
21381 # ESC Escape ^[ - - -
21382 # ETB End Transmission Block ^W - - -
21383 # ETX End of Text ^C - - -
21384 # FF Form Feed ^L - - -
21385 # FNK Function Key * \E [ Pn SPC W - - -
21386 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
21387 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
21388 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
21389 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
21390 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
21391 # HPB Char Position Backward \E [ j 1 FE -
21392 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
21393 # HT Horizontal Tab * ^I - FE - (N)
21394 # HTJ Horz Tab w/Justification \E I - FE -
21395 # HTS Horizontal Tab Set \E H - FE hts
21396 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
21397 # ICH Insert Character \E [ Pn @ 1 eF ich
21398 # IDCS ID Device Control String \E [ SPC O - * -
21399 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
21400 # IL Insert Line \E [ Pn L 1 eF il
21401 # IND Index \E D - FE -
21402 # INT Interrupt \E a - Fs -
21403 # JFY Justify \E [ Ps SPC F 0 FE -
21404 # IS1 Info Separator #1 * ^_ - * -
21405 # IS2 Info Separator #1 * ^^ - * -
21406 # IS3 Info Separator #1 * ^] - * -
21407 # IS4 Info Separator #1 * ^\ - * -
21408 # LF Line Feed ^J - - -
21409 # LS1R Locking Shift Right 1 * \E ~ - - -
21410 # LS2 Locking Shift 2 * \E n - - -
21411 # LS2R Locking Shift Right 2 * \E } - - -
21412 # LS3 Locking Shift 3 * \E o - - -
21413 # LS3R Locking Shift Right 3 * \E | - - -
21414 # MC Media Copy \E [ Ps i 0 - - (S)
21415 # MW Message Waiting \E U - - -
21416 # NAK Negative Acknowledge * ^U - * -
21417 # NBH No Break Here * \E C - - -
21418 # NEL Next Line \E E - FE nel (D)
21419 # NP Next Page \E [ Pn U 1 eF -
21420 # NUL Null * ^@ - - -
21421 # OSC Operating System Command \E ] - Delim -
21422 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
21423 # PFS Page Format Selection * \E Pn SPC J 0 - -
21424 # PLD Partial Line Down \E K - FE - (T)
21425 # PLU Partial Line Up \E L - FE - (U)
21426 # PM Privacy Message \E ^ - Delim -
21427 # PP Preceding Page \E [ Pn V 1 eF -
21428 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
21429 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
21430 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
21431 # PTX Parallel Texts * \E [ \ - - -
21432 # PU1 Private Use 1 \E Q - - -
21433 # PU2 Private Use 2 \E R - - -
21434 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
21435 # REP Repeat Char or Control \E [ Pn b 1 - rep
21436 # RI Reverse Index \E M - FE - (V)
21437 # RIS Reset to Initial State \E c - Fs -
21438 # RM Reset Mode * \E [ Ps l - - - (W)
21439 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
21440 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
21441 # SCI Single-Char Introducer \E Z - - -
21442 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
21443 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
21444 # SD Scroll Down \E [ Pn T 1 eF rin
21445 # SDS Start Directed String * \E [ Pn ] 1 - -
21446 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
21447 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
21448 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
21449 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
21450 # SI Shift In ^O - - - (P)
21451 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
21452 # SL Scroll Left \E [ Pn SPC @ 1 eF -
21453 # SLH Set Line Home * \E [ Pn SPC U - - -
21454 # SLL Set Line Limit * \E [ Pn SPC V - - -
21455 # SLS Set Line Spacing * \E [ Pn SPC h - - -
21456 # SM Select Mode \E [ Ps h none - - (W)
21457 # SO Shift Out ^N - - - (Q)
21458 # SOH Start Of Heading * ^A - - -
21459 # SOS Start of String * \E X - - -
21460 # SPA Start of Protected Area \E V - - - (Z)
21461 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
21462 # SPH Set Page Home * \E [ Ps SPC G - - -
21463 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
21464 # SPL Set Page Limit * \E [ Ps SPC j - - -
21465 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
21466 # SR Scroll Right \E [ Pn SPC A 1 eF -
21467 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
21468 # SRS Start Reversed String * \E [ Ps [ 0 - -
21469 # SSA Start of Selected Area \E F - - -
21470 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
21471 # SSW Set Space Width * \E [ Pn SPC [ none - -
21472 # SS2 Single Shift 2 (G2 set) \E N - Intro -
21473 # SS3 Single Shift 3 (G3 set) \E O - Intro -
21474 # ST String Terminator \E \ - Delim -
21475 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
21476 # STS Set Transmit State \E S - - -
21477 # STX Start pf Text * ^B - - -
21478 # SU Scroll Up \E [ Pn S 1 eF indn
21479 # SUB Substitute * ^Z - - -
21480 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
21481 # SYN Synchronous Idle * ^F - - -
21482 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
21483 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
21484 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
21485 # TBC Tab Clear \E [ Ps g 0 FE tbc
21486 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
21487 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
21488 # TSS Thin Space Specification \E [ Pn SC E none FE -
21489 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
21490 # VPB Line Position Backward * \E [ Pn k 1 FE -
21491 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
21492 # VT Vertical Tabulation * ^K - FE -
21493 # VTS Vertical Tabulation Set \E J - FE -
21495 # ---------------------------------------------------------------------------
21499 # Some control characters are listed in the ECMA-48 standard without
21500 # being assigned functions relevant to terminal control there (they
21501 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
21502 # here anyway for completeness.
21504 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
21506 # (B) There seems to be some confusion abroad between CHA and HPA. Most
21507 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
21508 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
21509 # preserved the CHA abbreviation.
21511 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
21512 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
21513 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
21514 # CHT abbreviation.
21516 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
21518 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
21521 # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
21522 # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
21523 # 5 = clear all char tabs, 6 = clear all line tabs.
21525 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
21526 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
21527 # Position Absolute" but retains the HVP abbreviation.
21529 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
21532 # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
21533 # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
21534 # DSR, 6 = request CPR response.
21536 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
21537 # 1 = clear from beginning, 2 = clear.
21539 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
21541 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
21543 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
21544 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
21545 # Position Relative" but retains the HPR abbreviation.
21547 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
21550 # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
21551 # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
21552 # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
21553 # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
21554 # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
21555 # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
21556 # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
21557 # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
21558 # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
21559 # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
21560 # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
21561 # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
21562 # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
21563 # 61-65 = variable highlights for ideograms.
21565 # (P) SI is also called LSO, Locking Shift Zero.
21567 # (Q) SI is also called LS1, Locking Shift One.
21569 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
21570 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
21571 # Absolute' but retains the VPA abbreviation.
21573 # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
21574 # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
21575 # from secondary aux device, 4 = stop relay to primary aux device, 5 =
21576 # start relay to primary aux device, 6 = stop relay to secondary aux device,
21577 # 7 = start relay to secondary aux device.
21579 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
21582 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
21585 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
21587 # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
21588 # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
21589 # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
21590 # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
21591 # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
21592 # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
21593 # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
21594 # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
21595 # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
21596 # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
21597 # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
21598 # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
21599 # from ECMA-48's 5th edition but are listed here for reference.
21601 # (X) Select Alternate Presentation Variants is used only for non-Latin
21604 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
21606 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
21609 # ---------------------------------------------------------------------------
21613 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
21614 # X3.64 Control Sequence Introducer is the two characters "Escape ["
21616 # Delim a Delimiter
21618 # x/y identifies a character by position in the ASCII table (column/row)
21620 # eF editor function (see explanation)
21622 # FE format effector (see explanation)
21624 # F is a Final character in
21625 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
21626 # a control sequence (F from 4/0 to 7/14)
21628 # Gs is a graphic character appearing in strings (Gs ranges from
21629 # 2/0 to 7/14) in the ASCII table
21631 # Ce is a control represented as a single bit combination in the C1 set
21632 # of controls in an 8-bit character set
21634 # C0 the familiar set of 7-bit ASCII control characters
21636 # C1 roughly, the set of control chars available only in 8-bit systems.
21637 # This is too complicated to explain fully here, so read Jim Fleming's
21638 # article in the February 1983 BYTE, especially pages 214 through 224.
21640 # Fe is a Final character of a 2-character Escape sequence that has an
21641 # equivalent representation in an 8-bit environment as a Ce-type
21642 # (Fe ranges from 4/0 to 5/15)
21644 # Fs is a Final character of a 2-character Escape sequence that is
21645 # standardized internationally with identical representation in 7-bit
21646 # and 8-bit environments and is independent of the currently
21647 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
21649 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
21652 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
21655 # Pn is a numeric parameter in a control sequence, a string of zero or
21656 # more characters ranging from 3/0 to 3/9 in the ASCII table
21658 # Ps is a variable number of selective parameters in a control sequence
21659 # with each selective parameter separated from the other by the code
21660 # 3/11 (which usually represents a semicolon); Ps ranges from
21661 # 3/0 to 3/9 and includes 3/11
21663 # * Not relevant to terminal control, listed for completeness only.
21665 # Format Effectors versus Editor Functions
21667 # A format effector specifies how following output is to be displayed.
21668 # An editor function allows you to modify the display. Informally
21669 # format effectors may be destructive; format effectors should not be.
21671 # For instance, a format effector that moves the "active position" (the
21672 # cursor or equivalent) one space to the left would be useful when you want to
21673 # create an overstrike, a compound character made of two standard characters
21674 # overlaid. Control-H, the Backspace character, is actually supposed to be a
21675 # format effector, so you can do this. But many systems use it in a
21676 # nonstandard fashion, as an editor function, deleting the character to the
21677 # left of the cursor and moving the cursor left. When Control-H is assumed to
21678 # be an editor function, you cannot predict whether its use will create an
21679 # overstrike unless you also know whether the output device is in an "insert
21680 # mode" or an "overwrite mode". When Control-H is used as a format effector,
21681 # its effect can always be predicted. The familiar characters carriage
21682 # return, linefeed, formfeed, etc., are defined as format effectors.
21684 # NOTES ON THE DEC VT100 IMPLEMENTATION
21686 # Control sequences implemented in the VT100 are as follows:
21688 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
21689 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
21691 # plus several private DEC commands.
21693 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
21695 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
21696 # Erase from beginning of line to cursor Esc [ 1 K
21697 # Erase line containing cursor Esc [ 2 K
21698 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
21699 # Erase from beginning of screen to cursor Esc [ 1 J
21700 # Erase entire screen Esc [ 2 J
21702 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
21703 # Esc [ 2 J, but this is wrong; the default is 0.
21705 # The VT100 responds to receiving the DA (Device Attributes) control
21707 # Esc [ c (or Esc [ 0 c)
21709 # by transmitting the sequence
21713 # where Ps is a character that describes installed options.
21715 # The VT100's cursor location can be read with the DSR (Device Status
21720 # The VT100 reports by transmitting the CPR sequence
21724 # where Pl is the line number and Pc is the column number (in decimal).
21726 # The specification for the DEC VT100 is document EK-VT100-UG-003.
21730 # Here is a description of the color and attribute controls supported in the
21731 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
21732 # terminal emulators for Intel boxes obey these. They are a proper subset
21733 # of the ECMA-48 escapes.
21735 # 0 all attributes off
21736 # 1 foreground bright
21738 # 5 blink on/background bright (not reliable with brown)
21740 # 8 set blank (non-display)
21741 # 10 set primary font
21742 # 11 set first alternate font (on PCs, display ROM characters 1-31)
21743 # 12 set second alternate font (on PCs, display IBM high-half chars)
21745 # Color attribute sets
21746 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
21747 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
21748 # Bright black becomes gray. Bright brown becomes yellow,
21749 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
21751 # * If the 5 attribute is on and you set a background color (40-47) it is
21752 # supposed to enable bright background.
21754 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
21755 # when you try to set a "bright brown" (yellow) background with attribute
21756 # 5 (you get a blinking yellow foreground instead). A few displays
21757 # (including the System V console) support an attribute 6 that undoes this
21758 # braindamage (this is required by iBCS2).
21760 # * Some older versions of ANSI.SYS have a bug that causes thems to require
21761 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
21764 #### Intel Binary Compatibility Standard
21766 # For comparison, here are the capabilities implied by the Intel Binary
21767 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
21768 # These recommendations are optional. IBCS2 allows the leading escape to
21769 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
21770 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
21771 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
21772 # terminfo entry are followed with the corresponding capability in parens:
21774 # CSI <n>k disable (n=0) or enable (n=1) keyclick
21775 # CSI 2h lock keyboard
21776 # CSI 2i send screen as input
21777 # CSI 2l unlock keyboard
21778 # CSI 6m enable background color intensity
21779 # CSI <0-2>c reserved
21780 # CSI <0-59>m select graphic rendition
21781 # CSI <n>;<m>H (cup) cursor to line n and column m
21782 # CSI <n>;<m>f cursor to line n and column m
21783 # CSI <n>@ (ich) insert characters
21784 # CSI <n>A (cuu) cursor up n lines
21785 # CSI <n>B (cud) cursor down n lines
21786 # CSI <n>C (cuu) cursor right n characters
21787 # CSI <n>D (cud) cursor left n characters
21788 # CSI <n>E cursor down n lines and in first column
21789 # CSI <n>F cursor up n lines and in first column
21790 # CSI <n>G (hpa) position cursor at column n-1
21791 # CSI <n>J (ed) erase in display
21792 # CSI <n>K (el) erase in line
21793 # CSI <n>L (il) insert line(s)
21794 # CSI <n>P (dch) delete characters
21795 # CSI <n>S (indn) scroll up n lines
21796 # CSI <n>T (rin) scroll down n lines
21797 # CSI <n>X (ech) erase characters
21798 # CSI <n>Z (cbt) back up n tab stops
21799 # CSI <n>` cursor to column n on line
21800 # CSI <n>a (cuu) cursor right n characters
21801 # CSI <n>d (vpa) cursor to line n
21802 # CSI <n>e cursor down n lines and in first column
21803 # CSI <n>g (cbt) clear all tabs
21804 # CSI <n>z make virtual terminal n active
21805 # CSI ?7h (smam) turn automargin on
21806 # CSI ?7l (rmam) turn automargin off
21807 # CSI s save cursor position
21808 # CSI u restore cursor position to saved value
21809 # CSI =<c>A set overscan color
21810 # CSI =<c>F set normal foreground color
21811 # CSI =<c>G set normal background color
21812 # CSI =<c>H set reverse foreground color
21813 # CSI =<c>I set reverse foreground color
21814 # CSI =<c>J set graphic foreground color
21815 # CSI =<c>K set graphic foreground color
21816 # CSI =<n>g (dispc) display n from alternate graphics character set
21817 # CSI =<p>;<d>B set bell parameters
21818 # CSI =<s>;<e>C set cursor parameters
21819 # CSI =<x>D enable/disable intensity of background color
21820 # CSI =<x>E set/clear blink vs. bold background
21821 # CSI 7 (sc) (sc) save cursor position
21822 # CSI 8 (rc) (rc) restore cursor position to saved value
21823 # CSI H (hts) (hts) set tab stop
21824 # CSI Q<n><string> define function key string
21825 # (string must begin and end with delimiter char)
21826 # CSI c (clear) clear screen
21828 # The lack of any specification for attributes in SGR (among other things)
21829 # makes this a wretchedly weak standard. The table above is literally
21830 # everything iBSC2 has to say about terminal escape sequences; there is
21831 # no further discussion of their meaning or how to set the parameters
21832 # in these sequences at all.
21835 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
21837 # The historical termcap file entries were written primarily in 4.4BSD termcap.
21838 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
21839 # with the extension names chosen for compatibility with the termcap names
21840 # assigned in System V terminfo. There are some variant extension sets out
21841 # there. We try to describe them here.
21843 #### XENIX extensions:
21845 # The XENIX extensions include a set of function-key capabilities as follows:
21847 # code XENIX variable name terminfo name name clashes?
21848 # ---- ------------------- ------------- -----------------------
21850 # CR key_char_right
21851 # CW key_change_window create_window
21853 # HM key_home khome
21855 # LD key_delete_line kdl1
21856 # LF key_linefeed label_off
21857 # NU key_next_unlocked_cell
21858 # PD key_page_down knp
21860 # PN start_print mc5
21862 # PS stop_print mc4
21863 # PU key_page_up kpp pulse
21864 # RC key_recalc remove_clock
21865 # RF key_toggle_ref req_for_input
21866 # RT key_return kent
21867 # UP key_up_arrow kcuu1 parm_up_cursor
21869 # WR key_word_right
21871 # The XENIX extensions also include the following character-set and highlight
21874 # XENIX terminfo function
21875 # ----- -------- ------------------------------
21876 # GS smacs start alternate character set
21877 # GE rmacs end alternate character set
21878 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
21879 # bo blink begin blink (not used in /etc/termcap)
21880 # be end blink (not used in /etc/termcap)
21881 # bb blink glitch (not used in /etc/termcap)
21882 # it dim begin dim (not used in /etc/termcap)
21883 # ie end dim (not used in /etc/termcap)
21884 # ig dim glitch (not used in /etc/termcap)
21886 # Finally, XENIX also used the following forms-drawing capabilities:
21888 # single double type ASCII approximation
21889 # ------ ------ ------------- -------------------
21890 # GV Gv vertical line |
21891 # GH Gv horizontal line - _
21892 # G1 G5 top right corner _ |
21893 # G2 G6 top left corner |
21894 # G3 G7 bottom left corner |_
21895 # G4 G8 bottom right corner _|
21896 # GD Gd down-tick character T
21897 # GL Gl left-tick character -|
21898 # GR Gr right-tick character |-
21899 # GC Gc middle intersection -|-
21900 # GU Gu up-tick character _|_
21902 # These were invented to take advantage of the IBM PC ROM character set. One
21903 # can compose an acsc string from the single-width characters as follows
21904 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
21905 # When translating a termcap file, ncurses tic will do this automatically.
21906 # The double forms characters don't fit the SVr4 terminfo model.
21908 #### AT&T Extensions:
21910 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
21911 # nonstandard capabilities. Its signature is the KM capability, used to name
21912 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
21913 # set. Comments in the original, and a little cross-checking with other AT&T
21914 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
21915 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
21916 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
21917 # cursor invisible), and CV=:ve: (make cursor normal).
21921 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
21922 # have the System V capabilities up to SVr1 level. After that, it supports
21923 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
21924 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
21925 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
21926 # HP binary format incompatible with SVr4's.
21928 #### IBM Extensions
21930 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
21931 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
21932 # capabilities following prtr_non with the following special capabilties:
21933 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
21934 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
21935 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
21936 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
21937 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
21938 # renamed (to kcbt and kslt). The places in the box[12] capabilities
21939 # correspond to acsc chars, here is the mapping:
21941 # box1[0] = ACS_ULCORNER
21942 # box1[1] = ACS_HLINE
21943 # box1[2] = ACS_URCORNER
21944 # box1[3] = ACS_VLINE
21945 # box1[4] = ACS_LRCORNER
21946 # box1[5] = ACS_LLCORNER
21947 # box1[6] = ACS_TTEE
21948 # box1[7] = ACS_RTEE
21949 # box1[8] = ACS_BTEE
21950 # box1[9] = ACS_LTEE
21951 # box1[10] = ACS_PLUS
21953 # The box2 characters are the double-line versions of these forms graphics.
21954 # The AIX binary terminfo format is incompatible with SVr4's.
21956 #### Iris console extensions:
21958 # HS is half-intensity start; HE is half-intensity end
21959 # CT is color terminal type (for Curses & rogue)
21960 # CP is color change escape sequence
21961 # CZ are color names (for Curses & rogue)
21963 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
21965 #### TC Extensions:
21967 # There is a set of extended termcaps associated with something
21968 # called the "Terminal Control" or TC package created by MainStream Systems,
21969 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
21970 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
21971 # that flags color terminals.
21973 ######## NCURSES USER-DEFINABLE CAPABILITIES
21975 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
21976 # infocmp to manipulate user-definable capabilities. Those that are intended
21977 # for use in either terminfo or termcap use 2-character names. Extended
21978 # function keys do not use 2-character names, and are available only with
21981 # As of mid-2012, no other terminfo/termcap implementation than ncurses
21982 # supports this extension; termcap libraries can as noted above make limited
21983 # use of the feature.
21985 # ncurses makes explicit checks for a few user-definable capabilities: AX, U8,
21988 #### SCREEN Extensions:
21990 # The screen program uses the termcap interface. It recognizes a few useful
21991 # nonstandard capabilities. Those are used in this file.
21993 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
21995 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
21996 # E0 (str) Switch charset 'G0' back to standard charset.
21997 # S0 (str) Switch charset 'G0' to the specified charset.
21998 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
22001 # AX is relatively straightforward; it is interpreted by ncurses to say that
22002 # SGR 39/49 reset the terminal's foreground and background colors to their
22005 # XT is harder, since screen's manpage does not give more details. For that,
22006 # we must read screen's source-code. When XT is set, screen assumes
22008 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
22009 # screen may also set the terminal's name, which is (for xterm) distinct
22010 # from the icon name.
22011 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
22012 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
22013 # this is an rxvt feature.
22014 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
22015 # These are from xterm, although xterm accepts mouse codes that may not be
22016 # recognized by screen, e.g., 1005, 1006.
22017 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
22018 # sequence. However, because screen uses only termcap, the values returned
22019 # by Af/Ab are not usable because they rely on expressions that termcap
22020 # does not support. Therefore, screen uses a hardcoded string to work
22021 # around the limitation.
22022 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
22024 # The other ISO-2022 features are rarely used, but provided here to make
22025 # screen's termcap features available.
22027 #### XTERM Extensions:
22029 # Most of the xterm extensions are for function-keys. Since patch #94 (in
22030 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
22031 # additional function-key strings. Some other developers copied the feature,
22032 # though they did not follow xterm's lead in patch #167 (in 2002), to make
22033 # these key definitions less ambiguous.
22035 # A few terminals provide similar functionality (sending distinct keys when
22036 # a modifier is used), including rxvt.
22038 # These are the extended keys defined in this file:
22040 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
22041 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
22042 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
22043 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
22045 # Here are the other xterm-related extensions which are used in this file:
22047 # Cr is a string capability which resets the cursor color
22048 # Cs is a string capability which sets the cursor color to a given value.
22049 # The single string parameter is the color name/number, according to the
22051 # Ms modifies the selection/clipboard. Its parameters are
22052 # p1 = the storage unit (clipboard, selection or cut buffer)
22053 # p2 = the base64-encoded clipboard content.
22054 # Se resets the cursor style to the terminal power-on default.
22055 # Ss is a string capability with one numeric parameter. It is used to set the
22056 # cursor style as described by the DECSCUSR function to a block or
22058 # TS is a string capability which acts like "tsl", but uses no parameter and
22059 # goes to the first column of the "status line".
22060 # XM is a string capability which overrides ncurses's built-in string which
22061 # enables/disables xterm mouse mode.
22062 # xm shows the format of the mouse responses. Parameters are (from zero):
22066 # p4 = state, e.g., pressed or released
22067 # p6 = y-ordinate starting region
22068 # p7 = x-ordinate starting region
22069 # p8 = y-ordinate ending region
22070 # p9 = x-ordinate ending region
22071 # Other extensions, used in xm:
22074 #### Miscellaneous extensions:
22076 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
22077 # This was implemented for the Hurd.
22078 # E3 clears the terminal's scrollback buffer. This was implemented in the
22079 # Linux 3.0 kernel as a security feature. It matches a feature which was
22080 # added in xterm patch #107.
22081 # U8 is a numeric capability which denotes a terminal emulator which does not
22082 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
22083 # value to enable it.
22085 ######## CHANGE HISTORY
22087 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
22088 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
22089 # maintained by Eric S. Raymond as part of the ncurses project.
22091 # This file contains all the capability information present in John Kunze's
22092 # last version of the termcap master file, except as noted in the change
22093 # comments at end of file. Some information about very ancient obsolete
22094 # capabilities has been moved to comments. Some all-numeric names of older
22095 # terminals have been retired.
22097 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
22098 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
22099 # used by BSD curses.
22101 # The 9.1.0 version of this file was translated from my lightly-edited copy of
22102 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
22103 # the purpose. Unless the ncurses tic implementation and the Lisp code were
22104 # making perfectly synchronized mistakes which I then failed to catch by
22105 # eyeball, the translation was correct and perfectly information-preserving.
22107 # Major version number bumps correspond to major version changes in ncurses.
22109 # Here is a log of the changes since then:
22111 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
22112 # * First terminfo master translated from 8.3.
22113 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
22114 # * Replaced Wyse entries with updated entries supplied by vendor.
22116 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
22117 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
22118 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
22119 # * Better XENIX keycap translation. Describe TC termcaps.
22120 # * Contact and history info supplied by Qume.
22121 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
22122 # * Raided the Shuford FTP site for recent termcaps/terminfos.
22123 # * Added information on X3.64 and VT100 standard escape sequences.
22124 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
22125 # * Added a correct X11R6 xterm entry.
22126 # * Fixed terminfo translations of padding.
22127 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
22128 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
22129 # * Added u6/u7/u8/u9 capabilities.
22130 # * Added PCVT entry.
22131 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
22132 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
22133 # to use reverse-video standout so Emacs will look right.
22134 # * Added el1 capability to ansi.
22135 # * Added smacs/rmacs to ansi.sys.
22137 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
22138 # * New mt70 entry.
22139 # * Added COPYRIGHTS AND OTHER DELUSIONS.
22140 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
22141 # smartvid & smarterm, ampex 175 & 219 & 232,
22142 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
22143 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
22144 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
22145 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
22146 # * Replaced the Perkin-Elmer entries with vendor's official ones.
22147 # * Restored the old minimal-ansi entry, luna needs it.
22148 # * Fixed some incorrect ip and proportional-padding translations.
22149 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
22150 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
22151 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
22152 # to force a particular height.
22153 # * Added beehive4 and reorganized other Harris entries.
22154 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
22155 # * Merged in DEC's official entries for its terminals. The only old
22156 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
22157 # * Replaced the translated BBN Bitgraph entries with purpose-built
22158 # ones from AT&T's SVr3.
22159 # * Replaced the AT&T entries with AT&T's official terminfos.
22160 # * Added teleray 16, vc415, cops10.
22161 # * Merged in many individual capabilities from SCO terminfo files.
22162 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
22164 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
22165 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
22166 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
22167 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
22168 # simterm, citoh and variants.
22169 # * Replaced sol entry with sol1 and sol2.
22170 # * Replaced Qume QVT and Freedom-series entries with purpose-built
22171 # terminfo entries.
22172 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
22173 # and dg200 entries using caps from from SCO.
22174 # * Added the usual set of function-key mappings to ANSI entry.
22175 # * Corrected xterm's function-key capabilities.
22176 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
22177 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
22178 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
22179 # * Fix in xterm entry, get the arrow keys right.
22180 # * Change some \0 escapes to \200.
22181 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
22182 # * Added apple (Videx card), adm1a, oadm31.
22183 # * Fixed malformed ampex csr.
22184 # * Fixed act4, cyb110; they had old-style prefix padding left in.
22185 # * Changed mandatory to advisory padding in many entries.
22186 # * Replaced HP entries up to hpsub with purpose-built ones.
22187 # * Blank rmir/smir/rmdc/smdc capabilities removed.
22188 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
22189 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
22190 # * Replaced the Ann Arbor entries with SCO's, the init strings are
22191 # more efficient (but the entries otherwise identical).
22192 # * Added dg211 from Shuford archive.
22193 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
22194 # adm42-nl, pc52, gs6300, xerox820, uts30.
22195 # * Pull SCO's padding into vi200 entry.
22196 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
22197 # entries merged in from SCO's descriptions.
22198 # * Fixed old-style prefix padding on zen50, h1500.
22199 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
22200 # entry from SCO's description.
22201 # * Reorganized the special entries.
22202 # * Added lm#0 to cbunix and virtual entries.
22204 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
22205 # * Restored cdc456tst.
22206 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
22207 # * Added megatek, beacon, microkit.
22208 # * Freeze for ncurses-1.9 release.
22209 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
22210 # * Added historical data for TAB.
22211 # * Comment fixes from David MacKenzie.
22212 # * Added the new BSDI pc3 entry.
22213 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
22214 # * A change in the tic -C logic now ensures that all entries in
22215 # the termcap translation will fit in < 1024 bytes.
22216 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
22217 # from GNU termcap file. This merges in all their local information.
22218 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
22219 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
22220 # * Added warnings about entries with long translations (restoring
22221 # all the GNU termcaps pushes a few over the edge).
22222 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
22223 # * Yet another tic change, and a couple of entry tweaks, to reduce the
22224 # number of long (> 1024) termcap translations back to 0.
22226 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
22227 # * Added kf13-kf20 to Linux entry.
22228 # * Regularize Prime terminal names.
22229 # * Historical data on Synertek.
22230 # * Freeze for ncurses-1.9.1.
22231 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
22232 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
22233 # * Eliminate whitespace in short name fields, this tanks some scripts.
22234 # * Name field changes to shorten some long entries.
22235 # * Termcap translation now automatically generates empty rmir/smir
22236 # when ich1/ich is present (copes with an ancient vi bug).
22237 # * Added `screen' entries from FSF's screen-3.6.2.
22238 # * Added linux-nic and xterm-nic entries.
22239 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
22240 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
22241 # eliminating some special-case code in ncurses.
22243 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
22244 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
22245 # that captures everything unique from it.
22246 # * Added reorder script generator.
22247 # * Freeze for ncurses 1.9.2 release.
22248 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
22249 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
22250 # * Added Olaf Siebert's corrections for adm12.
22251 # * ansi-pc-color now includes the colors and pairs caps, so that
22252 # entries which use it will inherit them automatically.
22253 # * The linux entry can now recognize the center (keypad 5) key.
22254 # * Removed some junk that found its way into Linux acsc.
22256 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
22257 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
22258 # * xterm doesn't try to use application keypad mode any more.
22259 # * Freeze for ncurses-1.9.3 release.
22260 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
22261 # * Added corrected sun entry from vendor.
22262 # * Added csr capability to linux entry.
22263 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
22264 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
22265 # * Some commented-out caps in long entries come back in, my code
22266 # for computing string-table lengths had a bug in it.
22267 # * pcansi series modified to fit comm-program reality better.
22268 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
22269 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
22270 # * Correct some bad aliases in the pcansi series
22271 # * Added entry for QNX console.
22272 # * Clean up duplicate long names for use with 4.4 library.
22273 # * Change vt100 standout to be normal reverse vide, not bright reverse;
22274 # this makes the Emacs status line look better.
22275 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
22276 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
22277 # * Minor surgery, mostly on name strings, to shorten termcap version.
22279 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
22280 # * Added dec-vt100 for use with the EWAN emulator.
22281 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
22282 # * Freeze for 1.9.5 alpha release.
22283 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
22284 # * Changed xterm lines to 24, the X11R6 default.
22285 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
22286 # * Added 7 newly discovered, undocumented acsc characters to linux
22287 # entry (the pryz{|} characters).
22288 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
22289 # * Correct two typos in the xterm entries introduced in 9.9.1.
22290 # * I finally figured out how to translate ko capabilities. Done.
22291 # * Added tvi921 entries from Tim Theisen.
22292 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
22293 # * Removed mystery tec entry, it was neither interesting nor useful.
22294 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
22295 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
22296 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
22297 # by making them relative to use capabilities
22298 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
22299 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
22300 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
22302 # * Translate all home=\E[;H capabilities to home=\E[H, they're
22304 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
22305 # vt100 and ANSI-like terminals.
22306 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
22307 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
22308 # does this now, too.
22309 # * fviewpoint is gone, it duplicated screwpoint.
22310 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
22311 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
22312 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
22313 # The UW vi50 replaces the old one, which becomes vi50adm,
22314 # * No more embedded commas in name fields.
22316 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
22317 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
22318 # * Introduced klone+* entries for describing Intel-console behavior.
22319 # * Linux kbs is default-mapped to delete for some brain-dead reason.
22320 # * -nsl -> -ns. The -pp syntax is obsolete.
22321 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
22322 # * Make xterm entry do application-keypad mode again. I got complaints
22323 # that it was messing up someone's 3270 emulator.
22324 # * Added some longname fields in order to avoid warning messages from
22325 # older tic implementations.
22326 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
22327 # it! (This gives us pi, greater than, less than, and a few more.)
22328 # * Freeze for ncurses-1.9.6 release.
22329 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
22330 # * Add xon to a number of console entries, they're memory-mapped and
22331 # don't need padding.
22332 # * Correct the use dependencies in the ansi series.
22333 # * Hand-translate more XENIX capabilities.
22334 # * Added hpterm entry for HP's X terminal emulator.
22335 # * Added aixterm entries.
22336 # * Shortened four names so everything fits in 14 chars.
22338 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
22339 # * Added ibcs2 entry and info on iBCS2 standard.
22340 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
22341 # * We can handle the HP meml/memu capability now.
22342 # * Added smacs to klone entries, just as documentation.
22343 # * Carrected ansi.sys and cit-500 entries.
22344 # * Added z39, vt320-k311, v220c, and avatar entries.
22345 # * Make pcansi use the ansi.sys invis capability.
22346 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
22347 # tvi925, tvi950, dt80, ncr7900i, h19.
22348 # * X3.64 has been withdrawn, change some references.
22349 # * Removed function keys from ansi-m entry.
22350 # * Corrected ansi.sys entry.
22351 # * Freeze for ncurses-1.9.7 release.
22352 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
22353 # * Added rmam/smam capabilities to many entries based on init strings.
22354 # * Added correct hpa/vpa to linux.
22355 # * Reduced several entries relative to vt52.
22356 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
22357 # * Exiled some utterly unidentifiable custom and homebrew types to the
22358 # UFO file; also, obsolete small-screen hardware; also, entries which
22359 # look flat-out incorrect, garbled, or redundant. These include the
22360 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
22361 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
22362 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
22363 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
22364 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
22365 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
22366 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
22367 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
22368 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
22369 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
22370 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
22371 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
22372 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
22373 # * Corrected pcvt25h as suggested by Brian C. Grayson
22374 # <bgrayson@pine.ece.utexas.edu>.
22375 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
22376 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
22377 # * Added kent=\EOM to xterm entry.
22379 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
22380 # * Corrected gigi entry.
22381 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
22382 # bad hpa/vpa capabilities.
22383 # * Corrected flash strings to have a uniform delay of .2 sec. No
22384 # more speed-dependent NUL-padding!
22385 # * terminfo capabilities in comments bracketed with <>.
22386 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
22387 # * Replaced pcvt with the 3.31 pcvt entries.
22388 # * Freeze for 1.9.7a.
22389 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
22390 # * Added emu entry from the X11R6 contrib tape sources.
22392 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
22393 # * Improved iris-ansi and sun entries.
22394 # * More flash string improvements.
22395 # * Corrected wy160 & wy160 as suggested by Robert Dunn
22396 # * Added dim to at386.
22397 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
22398 # he's ready to start using the termcap generated from this one.
22399 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
22400 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
22401 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
22402 # att610, att620, att630,
22403 # * Changed hazeltine name prefix from h to hz.
22404 # * Sent t500 to the UFI file.
22405 # * I think we've sucked all the juice out of BSDI's termcap file now.
22406 # * Freeze for ncurses 1.9.8 release
22407 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
22408 # * Unfreeze, linux kbs needed to be fixed.
22409 # * Tim Theisen pinned down a bug in the DMD firmware.
22410 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
22411 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
22412 # (The broken ones had been shadowed by sgr.)
22413 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
22414 # * Added documentation on ECMA-48 standard.
22415 # * New Amiga entry.
22416 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
22417 # * More ECMA-48 stuff
22418 # * Corrected typo in minix entry, added pc-minix.
22419 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
22420 # * Added rxvt entry.
22421 # * Added 1.3.x color-change capabilities to linux entry.
22422 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
22423 # * Corrected rxvt entry khome/kend.
22424 # * Corrected linux color change capabilities.
22425 # * NeXT entries from Dave Wetzel.
22426 # * Cleaned up if and rf file names (all in /usr/share now).
22427 # * Changed linux op capability to avoid screwing up a background color
22428 # pair set by setterm.
22429 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
22430 # * Added xterm-sun.
22431 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
22434 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
22435 # * Another sweep through the Shuford archive looking for new info.
22436 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
22437 # * Added st52 from Per Persson.
22438 # * Added eterm from the GNU Emacs 19.30 distribution.
22439 # * Freeze for 1.9.9.
22440 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
22441 # * FreeBSD console entries from Andrew Chernov.
22442 # * Removed duplicate Atari st52 name.
22443 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
22444 # * xterm doesn't actually have ACS_BLOCK.
22445 # * Change klone+color setf/setb to simpler forms that can be
22446 # translated into termcap.
22448 # * Removed mechanically-generated junk capabilities from cons* entries.
22449 # * Added color support to bsdos.
22450 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
22451 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
22452 # * Created ecma+color, linux can use it. Also added ech to linux.
22453 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
22454 # * Add descriptions to FreeBSD console entries. Also shorten
22455 # some aliases to <= 14 chars for portability.
22456 # * Added x68k console
22457 # * Added OTbs to several VT-series entries.
22458 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
22459 # * screen entry update for 3.7.1 from Michael Alan Dorman.
22460 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
22461 # * kterm correction due to Kenji Rikitake.
22462 # * ACS correction in vt320-kll due to Phillippe De Muyter.
22463 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
22464 # * Sun console entry correction from J.T. Conklin.
22465 # * Changed all DEC VT300 and up terminals to use VT300 tab set
22466 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
22467 # * Added smul to linux entry (we never noticed it was missing
22468 # because of sgr!).
22469 # * Added rmln to hp+labels (deduced from other HP entries).
22470 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
22471 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
22472 # * Corrected vt220 acsc.
22473 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
22474 # this corresponds to reality and helps prevent some tic warnings.
22475 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
22476 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
22477 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
22478 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
22479 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
22480 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
22481 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
22482 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
22483 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
22484 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
22485 # ifmr, v3220, wy100q, tandem653, ibmaed.
22486 # * Added DWK terminal description.
22487 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
22488 # * Many entries now have highlights inherited from adm+sgr.
22489 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
22490 # * xtitle and xtitle-twm enable access to the X status line.
22491 # * Added linux-1.3.6 color palette caps in conventional format.
22492 # * Added adm1178 terminal.
22493 # * Move fos and apollo terminals to obsolete category.
22494 # * Aha! The BRL terminals file told us what the Iris extensions mean.
22495 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
22496 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
22498 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
22499 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
22500 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
22501 # * Corrected, from BRL termcap file: vi50.
22502 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
22503 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
22504 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
22505 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
22506 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
22507 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
22508 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
22509 # * Paired-attribute fixes to various terminals.
22510 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
22511 # * xterm entry corrections from Thomas Dickey.
22512 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
22513 # * Added t916 entry, translated from a termcap in SCO's support area.
22514 # * New qnx entry from Michael Hunter.
22515 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
22516 # * Added hpex2 from Ville Sulko.
22517 # * Fixed a bug that ran the qnx and pcvtXX together.
22518 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
22519 # * Added dtterm entry from Solaris CDE.
22520 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
22521 # * corrected pairs#8 typo in dtterm entry.
22523 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
22524 # * updated xterm entry to cover 3.1.2E's new features.
22525 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
22526 # * Added new minix entry
22527 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
22528 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
22529 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
22530 # * Added Prism entries and kt7ix.
22531 # * Caution notes about EWAN and tabset files.
22532 # * Changed /usr/lib/tabset -> /usr/share/tabset.
22533 # * Added acsc/rmacs/smacs to vt52.
22534 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
22535 # * Merged in Thomas Dickey's reorganization of the xterm entries;
22536 # added technical corrections to avoid warning messages.
22537 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
22538 # * Added rmso=\E[27m in Linux entry.
22539 # * Added koi8-r support for Linux console.
22540 # * Replace xterm entries with canonical ones from XFree86 3.2.
22541 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
22542 # * Added color_xterm from Jacob Mandelson
22543 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
22544 # * Back off the xterm entry to use r6 as a base.
22545 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
22546 # * Added dec-vt220 at Adrian Garside's request.
22548 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
22550 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
22551 # * Minor corrections to xterm entries.
22552 # * Replaced EWAN telnet entry.
22553 # * Dropped the reorder script generator. It was a fossil.
22554 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
22555 # * Replaced minitel-2 entry.
22556 # * Added MGR, ansi-nt.
22557 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
22558 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
22559 # the 4.4BSD Lite2 file.
22561 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
22562 # * Use setaf/setab consistently with SVr4.
22563 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
22564 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
22565 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
22566 # * add xterm-16color, for XFree86 3.3
22567 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
22568 # * correct typo in emu
22569 # * correct typo in vt102-w (Robert Wuest)
22570 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
22571 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
22572 # * remove ech capability from rxvt (it does the wrong thing)
22573 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
22574 # * remove spurious newlines from several entries (hp+color, wy50,
22575 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
22577 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
22578 # * correct rmso capability of wy50-mc
22579 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
22580 # * add cbt to xterm-xf86-v32
22581 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
22582 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
22583 # other capabilities not in xterm-r6.
22584 # * remove alternate character set from kterm entry.
22585 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
22586 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
22587 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
22588 # * add xterm-8bit entry.
22589 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
22590 # * repair several places where early version of tic replaced \, with \\\,
22591 # * make acsc entries canonical form (sorted, uniq).
22592 # * modify acsc entries for linux, linux-koi8
22593 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
22594 # * add color, mouse support to kterm.
22595 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
22596 # * correct wy120 smxon/tbc capabilities which were stuck together.
22597 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
22598 # * add entry for xterm-xf86-v39t
22599 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
22600 # * add u8,u9 to sun-il description
22601 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
22602 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
22604 # * add hds200 description (Walter Skorski)
22605 # * add EMX 0.9b descriptions
22606 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
22607 # * rename xhpterm back to hpterm.
22608 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
22609 # * change initc in linux-c-nc to use 0..1000 range.
22610 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
22611 # * remove hpa/vpa from rxvt, which implements them incorrectly.
22612 # * add sgr0 for rxvt.
22613 # * remove bogus smacs/rmacs from EMX descriptions.
22614 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
22615 # * revised entry for att7300
22616 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
22617 # * use \0 rather than \200.
22618 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
22619 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
22620 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
22621 # * rename xterm-xf86-v39t to xterm-xf86-v40
22622 # * remove bold/underline from sun console entries since they're not
22624 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
22625 # * add beterm entry (Fred Fish)
22626 # * add irix-color/xwsh entry.
22627 # * turn ncv off for linux.
22628 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
22629 # * set ncv for FreeBSD console (treat colors with reverse specially).
22630 # * remove sgr string from qnx based on report by Xiaodan Tang
22631 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
22632 # * remove spurious commas from descriptions
22633 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
22634 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
22635 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
22636 # apparently based on cp-866).
22638 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
22640 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
22641 # * Replaced minitel-2 entry.
22642 # * Added MGR, ansi-nt.
22643 # * Minor corrections to xterm entries.
22644 # * Replaced EWAN telnet entry.
22645 # * Dropped the reorder script generator. It was a fossil.
22646 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
22647 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
22648 # the 4.4BSD Lite2 file.
22649 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
22650 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
22651 # * Updated iris-ansi; corrected vt102-w.
22652 # * Switch base xterm entry to 3.3 level.
22653 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
22655 # * Removed rmir/smir from tv92B.
22657 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
22658 # * add hds200 description (Walter Skorski)
22659 # * add beterm entry (Fred Fish)
22660 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
22661 # iris-color entries.
22662 # * add emx entries.
22663 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
22664 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
22666 # * remove sgr string from qnx based on report by Xiaodan Tang
22667 # * Added u8/u9, removed rmul/smul from sun-il.
22668 # * 4.2 tic displays \0 rather than \200.
22669 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
22670 # apparently based on cp-866).
22671 # * Merged in Pavel Roskin's acsc for linux-koi8
22672 # * Corrected some erroneous \\'s to \.
22673 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
22674 # * II -> ii in pcvtXX, screen, xterm.
22675 # * Removed \n chars following ANSI escapes in sgr & friends.
22676 # * Updated Wyse entries.
22677 # * h19 corrections from Tim Pierce.
22678 # * Noted that the dm2500 has both ich and smir.
22679 # * added pccons for the Alpha under OSF/1.
22680 # * Added Sony NEWS workstation entries and cit101e-rv.
22681 # * Reverted `amiga'; to Kent Polk's version, as I'm told
22682 # the Verkuil entry messes up with Amiga Telnet.
22683 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
22684 # * Corrected attributions in 10.2.0 release notes.
22685 # * Scanned the Shuford archive for new terminfos and information.
22686 # * Removed sgr from qnx entry (Thomas Dickey).
22687 # * Added entries for ICL and Kokusai Data Systems terminals.
22688 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
22689 # * Incorporated att700 from the Boundless Technology FTP site.
22690 # * Miscellaneous contact-address and Web-page updates.
22692 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
22695 # * add nxterm and xterm-color terminfo description (request by Cristian
22696 # Gafton <gafton@redhat.com>).
22697 # * modify rxvt terminfo description to clear alternate screen before
22698 # switching back to normal screen, for compatibility with applications
22699 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
22700 # * modify linux terminfo description to reset color palette (reported
22701 # by Telford Tendys <telford@eng.uts.edu.au>).
22704 # * merge changes from current XFree86 xterm terminfo descriptions.
22707 # * Added minitel1 entries from Alexander Montaron.
22708 # * Added qnxt2 from Federico Bianchi.
22709 # * Added arm100 terminfo entries from Dave Millen.
22712 # * Added ncsa telnet entries from Francesco Potorti
22715 # * modify ncsa telnet entry to reflect color, other capabilities based on
22716 # examination of the source code - T.Dickey.
22719 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
22722 # * Added Francesco Potorti's tuned Wyse 99 entries.
22723 # * dtterm enacs correction from Alexander V. Lukyanov.
22724 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
22725 # * correct a typo in icl6404 entry.
22726 # * add xtermm and xtermc
22729 # * format most %'char' sequences to %{number}
22730 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
22731 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
22734 # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
22735 # * correct initialization string in xterm-r5, add misc other features
22736 # to correspond with xterm patch 84 - TD
22739 # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
22740 # * add Mathew Vernon's mach console entries
22741 # * corrections for ncsa function-keys (report by Larry Virden)
22744 # * change linux to use ncv#2, since underline does not work with color - TD
22747 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
22748 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
22749 # application modes, change kent to use the correct keypad code - TD
22752 # * add entry for Tera Term - TD
22755 # * minor improvements for teraterm entry - TD
22756 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
22757 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
22760 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
22761 # xterm and ncsa entries by removing the unneeded ones. Note that
22762 # some entries will return kend & khome versus kslt and kfnd, for
22763 # PC-style keyboards versus strict vt220 compatiblity - TD
22766 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
22768 # * add 'crt' entry - TD
22769 # * correct typos in 'linux-c' entry - TD
22772 # * update entries for BSD/OS console to use klone+sgr and klone+color
22773 # (Jeffrey C Honig)
22776 # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
22779 # * add linux-lat, from RedHat patches to ncurses 4.2
22782 # * add complete set of default function-key definitions for scoansi - TD.
22785 # * add cnorm, cvvis for Linux 2.2 kernels
22788 # * add kmous to xterm-r5 -TD
22789 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
22790 # parent "use" clause -TD
22793 # * corrected cnorm, added el1 in 'screen' description -TD
22796 # * add ms-vt100 -TD
22799 # * corrections to beterm entry -TD
22802 # * add cygwin entry -TD
22805 # * minor corrections for beterm entry -TD
22808 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
22811 # * add amiga-8bit entry
22812 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
22813 # rcons-color, based on
22814 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
22815 # * add alias for iris-ansi-net
22818 # * corrected scoansi entry's acsc, some function keys, add color -TD
22821 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
22822 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
22823 # key mapping, leaving Potorti's entries more like he named them -TD
22824 # * remove enter/exit am-mode from cygwin -TD
22827 # * correct typos in several entries (missing '[' from CSI):
22828 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
22829 # strings for avt-ns -TD
22830 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
22833 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
22834 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
22835 # * add xterm-88color and xterm-256color -TD
22838 # * add "obsolete" termcap strings -TD
22839 # * add kvt and gnome entries -TD
22842 # * correct cup string for regent100 -TD
22845 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
22846 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
22847 # * change OTrs capabilities to rs2 -TD
22848 # * add obsolete and extended capabilities to 'screen' -TD
22851 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
22853 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
22854 # and adding kcbt -TD
22857 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
22858 # nonstandard resource settings -TD
22861 # * minor fixes for xterm-*, based on Debian #58530 -TD
22864 # * add several terminal types from esr's "11.0", as well as comments.
22865 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
22866 # vt220-8bit, vt220-old, wy85-8bit
22869 # * add several terminal types from esr's "11.0.1" (ansi-*).
22870 # * update OTxx capabilities for changes on 2000/3/4.
22871 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
22874 # * move screen's AX extension to ecma+color, modify several entries to
22875 # use that, adjusting ncv as needed -TD
22878 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
22879 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
22880 # in esr's version.
22883 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
22884 # * correct color definition for ibm3164, make minor changes to other
22885 # IBM terminal definitions based on recent terminfo descriptions -TD
22888 # * add mgterm, from NetBSD -TD
22889 # * add alias sun-cgsix for sun-ss5 as per NetBSD
22890 # * change cons25w to use rs2 for reset rather than rs1 -TD
22891 # * add rc/sc to aixterm based on manpage -TD
22894 # * remove ncv from xterm-16color, xterm-256color
22897 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
22900 # * add Eterm (Michael Jennings)
22903 # * add amiga-vnc entry.
22906 # * correct description of Top Gun Telnet.
22907 # * add kterm-color
22910 # * add qansi* entries from QNX ftp site.
22913 # * add Matrix Orbital entries by Eric Z. Ayers).
22914 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
22918 # * add S0, E0 extensions to screen's entry -TD
22921 # * several corrections based on tic's new parameter-checking code -TD
22922 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
22923 # bracketing sequences that reset video attributes (\E8 would restore
22927 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
22930 # * improved scoansi, based on SCO man-page, and testing console,
22931 # scoterm with tack -TD
22934 # * modify kterm to use acsc via SCS controls.
22937 # * screen 3.9.8 allows xterm mouse controls to pass-through
22940 # * remove spurious "%|" from some xterm entries.
22943 # * modify 'screen' khome/kend to match screen 3.09.08
22944 # * add examples of 'screen' customization (screen.xterm-xfree86,
22945 # screen.xterm-r6, screen.teraterm) -TD
22948 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
22949 # * add "Apple_Terminal" entries -Benjamin Sittler
22950 # * remove time-delays from "Apple_Terminal" entries -TD
22951 # * make sgr entries time-delays consistent with individual caps -TD
22954 # * corrected/updated screen.xterm-xfree86
22957 # * ELKS descriptions, from Federico Bianchi
22958 # * add u6 (CSR) to Eterm (Michael Jennings).
22961 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
22962 # tic which handles names no longer than 14 characters. Add
22963 # corresponding descriptions for the Darwin PowerPC console named
22964 # "xnuppc" -Benjamin Sittler
22967 # * change kbs in mach entries to ^? (Marcus Brinkmann).
22970 # * add "putty" entry -TD
22971 # * updated "Apple_Terminal" entries -Benjamin Sittler
22974 # * add ms-vt100-color entry -TD
22975 # * add "konsole" entries -TD
22978 # * update gnome entry to Redhat 7.2 -TD
22981 # * add kf13-kf48 strings to cons25w -TD
22982 # * add pcvt25-color entry -TD
22983 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
22984 # * improve some features of scoansi entry based on SCO's version -TD
22985 # * add scoansi-new entry corresponding to OpenServer 5.0.6
22988 # * add kcbt to screen entry -TD
22991 # * add rxvt-16color, ibm+16color, mvterm entries -TD
22994 # * split out linux-basic entry, making linux-c inherit from that, and
22995 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
22996 # the history of this console type -TD
22997 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
22998 # r/g/b parameters of initc are in the range 0 to 1000 -TD
23001 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
23004 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
23005 # in the latter -TD
23008 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
23009 # * ncr260wy350pp has only 16 color pairs -TD
23010 # * add sun-type4 from NetBSD -TD
23011 # * update xterm-xfree86 to current (patch 170) -TD
23012 # * add screen-bce, screen-s entries -TD
23013 # * add xterm-1002, xterm-1003 entries -TD
23016 # * update homepage for Top Gun Telnet/SSH
23019 # * reduce duplication in emx entries, added emx-base -TD
23022 # * corrected acs for screen.teraterm -TD
23023 # * add tkterm entry -TD
23026 # * cygwin changes from Charles Wilson:
23027 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
23028 # primary instead of nxterm, to match XFree86's xterm.terminfo
23029 # usage and to prevent circular links.
23030 # (rxvt): add additional codes from rxvt.org.
23031 # (rxvt-color): new alias
23032 # (rxvt-xpm): new alias
23033 # (rxvt-cygwin): like rxvt, but with special acsc codes.
23034 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
23035 # with a "native" MSWin GUI. Each takes different acsc codes,
23036 # which are both different from the "normal" rxvt's acsc.
23037 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
23038 # (cygwinDBG): ditto.
23041 # * update gnome terminal entries -TD
23044 # * add entries for djgpp 2.03 and 2.04 -TD
23047 # * add alias for vtnt -TD
23048 # * update xterm-xfree86 for XFree86 4.4 -TD
23051 # * add linux-vt (Andrey V Lukyanov)
23054 # * add screen.linux -TD
23057 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
23060 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
23061 # * add vt100+ and vt-utf8 entries -TD
23062 # * add uwin entry -TD
23065 # * add sgr strings to several common entries lacking them, e.g.,
23066 # screen, to make the entries more portable -TD
23067 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
23068 # * similar fixups for cvvis/cnorm various entries -TD
23071 # * remove 'ncv' from xterm-256color (patch 188) -TD
23075 # * add xterm-xf86-v44 -TD
23076 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
23077 # on G1 being used via an ISO-2022 escape sequence (report by
23078 # Juliusz Chroboczek) -TD
23079 # * add 'hurd' entry -TD
23082 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
23084 # * align with xterm #192's use of xterm-new -TD
23085 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
23086 # * make xterm-new the default "xterm" -TD
23089 # * minor fixes for emu -TD
23091 # * add rmam/smam to linux (Trevor Van Bremen)
23092 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
23093 # * fixes for avatar0 -TD
23094 # * fixes for vp3a+ -TD
23097 # * add xterm-pc-fkeys -TD
23098 # * review/update gnome and gnome-rh90 entries (prompted by
23099 # Redhat Bugzilla #122815) -TD
23100 # * review/update konsole entries -TD
23101 # * add sgr, correct sgr0 for kterm and mlterm -TD
23102 # * correct tsl string in kterm -TD
23105 # * make ncsa-m rmacs/smacs consistent with sgr -TD
23106 # * add sgr, rc/sc and ech to syscons entries -TD
23107 # * add function-keys to decansi -TD
23108 # * add sgr to mterm-ansi -TD
23109 # * add sgr, civis, cnorm to emu -TD
23110 # * correct/simplify cup in addrinfo -TD
23111 # * corrections for gnome and konsole entries
23112 # (Redhat Bugzilla #122815) -Hans de Goede
23113 # * modify DEC entries (vt220, etc), to add sgr string, and to use
23114 # ISO-2022 strings for rmacs/smacs -TD
23117 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
23120 # * improved putty entry -Robert de Bath
23123 # * remove dch/dch1 from rxvt because they are implemented inconsistently
23124 # with the common usage of bce/ech -TD
23125 # * remove khome from vt220 (vt220's have no home key) -TD
23126 # * add rxvt+pcfkeys -TD
23129 # * modify several entries to ensure xterm mouse and cursor visibility
23130 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
23131 # Eterm, screen. (The xterm entries are left alone - old ones for
23132 # compatibility, and the new ones do not require this change) -TD
23135 # * add morphos entry -Pavel Fedin
23136 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
23137 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
23140 # * update wsvt25 entry -TD
23143 # * update pairs for xterm-88color and xterm-256color to reflect the
23144 # ncurses extended-color support -TD
23147 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
23148 # * add aixterm-16color to demonstrate 16-color capability -TD
23151 # * add media-copy to vt100 -TD
23152 # * corrected acsc string for vt52 -TD
23155 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
23157 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
23160 # * re-corrected acsc string for vt52 -TD
23163 # * corrected sun-il sgr string which referred to bold and underline -TD
23164 # * add sun-color entry -TD
23167 # * modify sgr0 in several entries to reset alternate-charset as in the
23169 # * modify sgr string of prism9 to better match the individual
23173 # * correct order of use= in rxvt-basic -TD
23176 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
23179 # * other minor fixes to cygwin based on tack -TD
23180 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
23183 # * add nsterm-16color entry -TD
23184 # * remove ncv flag from xterm-16color -TD
23185 # * remove setf/setb from xterm-256color to match xterm #209 -TD
23186 # * update mlterm entry to 2.9.2 -TD
23189 # * fixes to make nsterm-16color match report
23190 # by Christian Ebert -Alain Bench
23193 # * add xterm+256color building block -TD
23194 # * add gnome-256color, putty-256color, rxvt-256color -TD
23197 # * add hpterm-color -TD
23200 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
23201 # * add gnome-fc5 (prompted by GenToo #122566) -TD
23202 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
23203 # * improve xterm-256color by combining the ibm+16color setaf/setab
23204 # strings with SGR 48. The setf/setb strings also are cancelled here
23205 # rather than omitted so derived entries will cancel those also -Alain
23209 # * add some notes regarding copyright to terminfo.src -TD
23210 # * use rxvt+pcfkeys in Eterm -TD
23211 # * remove km and flash from gnome, Eterm and rxvt since they do not work
23212 # as one would expect (km sends ESC rather than setting the 8th bit
23214 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
23215 # * add konsole-solaris -TD
23218 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
23219 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
23220 # * modify xterm-24 to inherit from "xterm" -TD
23221 # * add xiterm entry -TD
23222 # * add putty-vt100 entry -TD
23223 # * corrected spelling of Michael A Dorman's name, prompted by
23224 # http://www.advogato.org/person/mdorman/diary.html -TD
23227 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
23228 # * update xterm+pcfkeys to match xterm #216 -TD
23231 # * make descriptions of xterm entries consistent with its terminfo -TD
23234 # * add xfce, mgt -TD
23237 # * correct acsc string in kterm -TD
23240 # * add kon entry -TD
23241 # * remove invis from linux and related entries, add klone+sgr8 for those
23242 # that implement the feature (or have not been shown to lack it) -TD
23245 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
23246 # * minor improvements to rxvt+pcfkeys -TD
23249 # * fix a few typos in if/then/else expressions -TD
23252 # * add several GNU Screen variations with 16- and 256-colors, and
23253 # status line (Alain Bench).
23256 # * add Newbury Data entries (Jean-Charles Billaud).
23259 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
23262 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
23263 # * add konsole-256color entry -TD
23266 # * add 9term entry (request by Juhapekka Tolvanen) -TD
23269 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
23270 # * add shift-control- and control-modified keys for rxvt editing
23272 # * update mlterm entry to 2.9.3 -TD
23273 # * add mlterm+pcfkeys -TD
23276 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
23277 # xterm+pcc0, etc., to make the corresponding building blocks reflect
23278 # xterm's capabilities -TD
23279 # * add mrxvt entry -TD
23280 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
23283 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
23286 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
23287 # xterm starting with patch #216 -TD
23288 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
23289 # to match xterm #230 -TD
23290 # * extend xterm+pccX entries to match xterm #230 -TD
23291 # * add xterm+app, xterm+noapp, from xterm #230 -TD
23292 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
23295 # * add screen.rxvt -TD
23298 # * add screen+fkeys (prompted by Debian #478094) -TD
23301 # * add screen.mlterm -TD
23302 # * improve mlterm and mlterm+pcfkeys -TD
23305 # * add Eterm-256color, Eterm-88color -TD
23306 # * add rxvt-88color -TD
23309 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
23310 # original to teraterm2.3 -TD
23311 # * update "gnome" to 2.22.3 -TD
23312 # * update "konsole" to 1.6.6 -TD
23313 # * add "aterm" -TD
23314 # * add "linux2.6.26" -TD
23317 # * change several \E[2g (clear tab at current column) to \E[3g
23318 # (clear all tabs) to match definition for tbc capability -TD
23321 # * add eterm-color -TD
23324 # * add screen.Eterm -TD
23327 # * correct typo in pfkey of ansi.sys-old
23328 # (report by Kalle Olavi Niemitalo)
23329 # * move function- and cursor-keys from emx-base to ansi.sys, and create
23330 # a pfkey capability which handles F1-F48 -TD
23333 # * add vwmterm entry (Bryan Christ)
23336 # * change ncv and op capabilities in sun-color to match Sun's entry for
23337 # this (report by Laszlo Peter)
23338 # * improve interix smso by using reverse rather than bold (report by
23339 # Kristof Zelechovski).
23342 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
23343 # * add linux-16color (Benjamin Sittler)
23344 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
23345 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
23346 # * add ccc and initc capabilities to xterm-16color -TD
23349 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
23352 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
23355 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
23356 # * rename minix to minix-1.7, add minix entry for Minux3 -TD
23359 # * add bterm (bogl 0.1.18) -TD
23360 # * minor fix to rxvt+pcfkeys -TD
23363 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
23366 # * add several screen-bce.XXX entries -TD
23369 # * modify screen-bce.XXX entries to exclude ech, since screen's color
23370 # model does not clear with color for that feature -TD
23373 # * rename atari and st52 to atari-old, st52-old, use newer entries from
23374 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
23377 # * add mlterm+256color entry -TD
23380 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
23381 # the alternate character set (patch by Nicholas Marriott)
23384 # * improve acsc for vt52 (Benjamin Sittler)
23385 # * modify nsterm entries for consistent sgr/sgr0 -TD
23386 # * modify xnuppc entries for consistent sgr/sgr0 -TD
23387 # * add invis to tek4115 sgr -TD
23390 # * reformat acsc strings to canonical format -TD
23393 # * add "XT" capability to entries for terminals that support both
23394 # xterm-style mouse- and title-controls, for "screen" which
23395 # special-cases TERM beginning with "xterm" or "rxvt" -TD
23398 # * fill in no-parameter forms of cursor-movement where a parameterized
23399 # form is available -TD
23400 # * fill in missing cursor controls where the form of the controls is
23402 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
23405 # * correct comparison used for setting 16-colors in linux-16color
23406 # entry (Novell #644831) -TD
23407 # * improve linux-16color entry, using "dim" for color-8 which makes it
23408 # gray rather than black like color-0 -TD
23411 # * make "vte" the principal entry defining "gnome", since GNOME terminal
23412 # is merely one of several terminals whose behavior is provided by this
23416 # * fix typo in rmso for tek4106 -Goran Weinholt
23419 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
23420 # * also suppress ncv in konsole-base -TD
23423 # * add U8 feature to denote entries for terminal emulators which do not
23424 # support VT100 SI/SO when processing UTF-8 encoding -TD
23425 # * add xterm-utf8 as a demo of the U8 feature -TD
23428 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
23431 # * update minix entry to minix 3.2 (Thomas Cort).
23434 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
23435 # * remove a backslash which continued comment, obscuring altos3
23436 # definition with OpenBSD toolset (Nicholas Marriott).
23439 # * add/use xterm+tmux chunk from xterm #271 -TD
23440 # * resync xterm-new entry from xterm #271 -TD
23441 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
23442 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
23443 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
23446 # * add kich1 to sun (Yuri Pankov)
23447 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
23450 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
23453 # * minor cleanup of X-terminal emulator section -TD
23454 # * add terminator entry -TD
23455 # * add simpleterm entry -TD
23458 # * add xterm+kbs fragment from xterm #272 -TD
23461 # * add pccon entries for OpenBSD console (Alexei Malinin)
23464 # * corrected old changelog comments -TD
23467 # * add putty-sco -TD
23470 # * add mach-gnu (Samuel Thibault)
23471 # * add mach-gnu-color, tweaks to mach-gnu -TD
23472 # * make sgr for sun-color agree with smso -TD
23473 # * make sgr for prism9 agree with other caps -TD
23474 # * make sgr for icl6404 agree with other caps -TD
23475 # * make sgr for ofcons agree with other caps -TD
23476 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
23477 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
23478 # * make sgr for avt-ns agree with other caps -TD
23481 # * make sgr for xterm-pcolor agree with other caps -TD
23482 # * make sgr for att5425 agree with other caps -TD
23483 # * make sgr for att630 agree with other caps -TD
23484 # * make sgr for linux entries agree with other caps -TD
23485 # * make sgr for tvi9065 agree with other caps -TD
23486 # * make sgr for ncr260vt200an agree with other caps -TD
23487 # * make sgr for ncr160vt100pp agree with other caps -TD
23488 # * make sgr for ncr260vt300an agree with other caps -TD
23489 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
23490 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
23493 # * correct order of use-clauses in st-256color -TD
23496 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
23499 # * document all of the user-defined capabilities in one place -TD
23500 # * add XT to some places to improve usefulness for other applications
23501 # than screen, which would like to pretend that xterm's title is
23502 # a status-line. -TD
23503 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
23504 # of ordering and overrides -TD
23507 # * add msgr to vt420, similar DEC vtXXX entries -TD
23508 # * add several missing vt420 capabilities from vt220 -TD
23509 # * factor out ansi+pp from several entries -TD
23510 # * change xterm+sl and xterm+sl-twm to include only the status-line
23511 # capabilities and not "use=xterm", making them more generally useful
23512 # as building-blocks -TD
23513 # * add dec+sl building block, as example -TD
23516 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
23517 # * add eslok flag to dec+sl -TD
23518 # * dec+sl applies to vt320 and up -TD
23519 # * drop wsl width from xterm+sl -TD
23520 # * reuse xterm+sl in putty and nsca-m -TD
23521 # * add ansi+tabs to vt520 -TD
23522 # * add ansi+enq to vt220-vt520 -TD
23525 # * remove p6 (bold) from opus3n1+ for consistency -TD
23526 # * remove acs stuff from env230 per clues in Ingres termcap -TD
23527 # * modify env230 sgr/sgr0 to match other capabilities -TD
23528 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
23529 # * make sgr for dku7202 agree with other caps -TD
23530 # * make sgr for ibmpc agree with other caps -TD
23531 # * make sgr for tek4107 agree with other caps -TD
23532 # * make sgr for ndr9500 agree with other caps -TD
23533 # * make sgr for sco-ansi agree with other caps -TD
23534 # * make sgr for d410 agree with other caps -TD
23535 # * make sgr for d210 agree with other caps -TD
23536 # * make sgr for d470c, d470c-7b agree with other caps -TD
23539 # * rewrite vt520 entry based on vt420 -TD
23540 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
23543 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
23544 # analysis by Martin Husemann).
23545 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
23546 # Onno van der Linden).
23547 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
23548 # * add kdch1, etc., to qvt108 -TD
23549 # * add dl1/il1 to some entries based on dl/il values -TD
23550 # * add dl to simpleterm -TD
23553 # * modify some older xterm entries to align with xterm source -TD
23554 # * separate "xterm-old" alias from "xterm-r6" -TD
23557 # * add E3 to xterm-basic and putty -TD
23560 # * add nsterm-256color, make this the default nsterm -TD
23561 # * remove bw from nsterm-bce, per testing with tack -TD
23564 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
23565 # (patch by Christian Persch).
23568 # * reviewed vte-2012, reverted most of the change since it was incorrect
23569 # based on testing with tack -TD
23570 # * un-cancel the initc in vte-256color, since this was implemented
23571 # starting with version 0.20 in 2009 -TD
23574 # * correct typo in sgr string for sun-color,
23575 # add bold for consistency with sgr,
23576 # change smso for consistency with sgr -TD
23577 # * correct typo in sgr string for terminator -TD
23578 # * add blink to the attributes masked by ncv in linux-16color (report
23579 # by Benjamin Sittler)
23582 # * change initialization for vt220, similar entries for consistency
23583 # with cursor-key strings (NetBSD #47674) -TD
23584 # * further improvements to linux-16color (Benjamin Sittler)
23587 # * move nsterm-related entries out of "obsolete" section to more
23588 # plausible "ansi consoles" -TD
23589 # * additional cleanup of table-of-contents by reordering -TD
23592 # * added note to clarify Terminal.app's non-emulation of the various
23593 # terminal types listed in the preferences dialog -TD
23596 # * use TS extension to describe xterm's title-escapes -TD
23597 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
23598 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
23599 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
23600 # (Debian #727119).
23601 # * simplify pfkey expression in ansi.sys -TD
23604 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
23607 # * updated notes for wsvt25 based on tack and vttest -TD
23608 # * add teken entry to show actual properties of FreeBSD's "xterm"
23612 # * add terminology entry -TD
23613 # * add mlterm3 entry, use that as "mlterm" -TD
23614 # * inherit mlterm-256color from mlterm -TD
23617 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
23620 # * cancel ccc in putty-256color and konsole-256color for consistency
23621 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
23622 # * add xterm+256setaf building block for various terminals which only
23623 # get the 256-color feature half-implemented -TD
23624 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
23628 # * add vt520ansi (Mike Gran)
23631 # * correct several entries which had termcap-style padding used in
23632 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
23633 # * correct syntax for padding in some entries: dg211, h19 -TD
23634 # * correct ti924-8 which had confused padding versus octal escapes -TD
23635 # * correct padding in sbi entry -TD
23638 # * update xterm-new to patch #305 -TD
23639 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
23640 # (italic). This was a long-ago typo in screen 3.1.1 which was
23641 # overlooked until a few terminal emulators implemented the feature -TD
23644 # > fix regression in screen terminfo entries (reports by Christian
23645 # Ebert, Gabriele Balducci) -TD
23646 # + revert the change to screen; see notes for why this did not work -TD
23647 # + cancel sitm/ritm for entries which extend "screen", to work around
23648 # screen's hardcoded behavior for SGR 3 -TD
23651 # + modify sgr for screen.xterm-new to support dim capability -TD
23652 # + add dim capability to nsterm+7 -TD
23653 # + cancel dim capability for iterm -TD
23654 # + add dim, invis capabilities to vte-2012 -TD
23655 # + add sitm/ritm to konsole-base and mlterm3 -TD
23658 # + add xterm-1005 and xterm-1006 entries, with suggested extension
23659 # capability "xm" -TD
23662 # + update test-report for mrxvt -TD
23665 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
23668 # + reviewed terminology 0.6.1, add function key definitions. None of
23669 # the vt100-compatibility issues were improved -TD
23672 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
23673 # + add several key definitions to nsterm-bce to match preconfigured
23674 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
23677 # + remove unnecessary ';' from E3 capabilities -TD
23678 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
23679 # + split-out recent change to nsterm-bce as nsterm-build326, and add
23680 # nsterm-build342 to reflect changes with successive releases of OSX
23681 # (discussion with Leonardo B Schenkel)
23682 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
23686 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
23687 # + add several screen.XXX entries to support the respective variations
23688 # for 256 colors -TD
23691 # + add putty+fnkeys* building-block entries -TD
23694 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
23695 # + add vte-2014, update vte to use that -TD
23698 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
23699 # from xterm-new (report by Richard Birkett) -TD
23702 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
23703 # + fixes for st 0.5 from testing with tack -TD
23705 ######## SHANTIH! SHANTIH! SHANTIH!