+#### AT&T (att, tty)
+#
+# This section also includes Teletype-branded VDTs.
+#
+# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
+# Boundless Technologies); for details, see the header comment on the ADDS
+# section.
+#
+# These are AT&T's official terminfo entries. All-caps aliases have been
+# removed.
+#
+att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
+ am, eo, mir, msgr, xon,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
+ kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
+ kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
+ kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
+ smso=\E[7m,
+att2350|AT&T 2350 Video Information Terminal 80 column mode,
+ mc0@, mc4@, mc5@, use=att2300,
+
+# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
+# Seems upward compatible with vt100, plus ins/del line/char.
+# On sgr, the protection parameter is ignored.
+# No check is made to make sure that only 3 parameters are output.
+# standout= reverse + half-intensity = 3 | 5.
+# bold= reverse + underline = 2 | 3.
+# note that half-bright blinking doesn't look different from normal blinking.
+# NOTE:you must program the function keys first, label second!
+# (att4410: a BSD entry has been seen with the following capabilities:
+# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
+# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
+att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
+ am, hs, mir, msgr, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
+ z{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
+ dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
+ ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
+ is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
+ \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
+ \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
+ \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
+ \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
+ \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
+ \s\s\s\EOW,
+ kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
+ kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
+ ll=\E[24H, nel=\r\n,
+ pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
+ \s%p2%s,
+ pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
+ sc=\E7,
+ sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%p1%{1}%+%dH,
+
+att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
+ cols#132, wsl#132,
+ is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
+
+att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
+ OTbs,
+ pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
+ use=att5410v1,
+
+att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
+ cols#132, wsl#132,
+ is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
+
+# 5410 in terms of a vt100
+# (v5410: added <rmam>/<smam> based on init string -- esr)
+v5410|att5410 in terms of a vt100,
+ am, mir, msgr, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\n, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
+ dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
+ il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
+ rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
+ rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+ use=vt100+fnkeys,
+
+#
+# Teletype Model 5420 -- A souped up 5410, with multiple windows,
+# even! the 5420 has three modes: scroll, window or page mode
+# this terminfo should work in scroll or window mode, but doesn't
+# take advantage of any of the differences between them.
+#
+# Has memory below (2 lines!)
+# 3 pages of memory (plus some spare)
+# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
+# <hpa>, <hts> would work for these, but these work in both scroll and window
+# mode... Unset insert character so insert mode works
+# <is1> sets 80 column mode,
+# <is2> escape sequence:
+# 1) turn off all fonts
+# 2) function keys off, keyboard lock off, control display off,
+# insert mode off, erasure mode off,
+# 3) full duplex, monitor mode off, send graphics off, nl on lf off
+# 4) reset origin mode
+# 5) set line wraparound
+# 6) exit erasure mode, positional attribute mode, and erasure extent mode
+# 7) clear margins
+# 8) program ENTER to transmit ^J,
+# We use \212 to program the ^J because a bare ^J will get translated by
+# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
+# 1 2 3 4 5 6 7 8
+# <is3> set screen color to black,
+# No representation in terminfo for the delete word key: kdw1=\Ed
+# Key capabilities assume the power-up send sequence...
+# This <rmcup> is not strictly necessary, but it helps maximize
+# memory usefulness: <rmcup=\Ez>,
+# Alternate sgr0: <sgr0=\E[m\EW^O>,
+# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
+# smkx programs the SYS PF keys to send a set sequence.
+# It also sets up labels f1, f2, ..., f8, and sends edit keys.
+# This string causes them to send the strings <kf1>-<kf8>
+# when pressed in SYS PF mode.
+# (att4415: I added <rmam>/<smam> based on the init string -- esr)
+att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
+ OTbs, db, mir, xon,
+ lh#2, lm#78, lw#8, nlab#8, wsl#55,
+ cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
+ cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
+ cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
+ dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
+ flash=\E[?5h$<200>\E[?5l, home=\E[x,
+ hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
+ il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
+ is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
+ \E[4i\Ex\E[21;1j\212,
+ is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
+ kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
+ kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+ kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
+ kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
+ lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
+ mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
+ rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
+ sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
+ tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
+ use=att4410,
+
+att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
+ cols#132, lm#54, wsl#97,
+ is1=\E[?3h$<100>, use=att4415,
+
+att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
+ flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
+
+att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
+ cols#132, lm#54, wsl#97,
+ flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
+ use=att4415,
+
+# Note that this mode permits programming USER PF KEYS and labels
+# However, when you program user pf labels you have to reselect
+# user pf keys to make them appear!
+att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
+ pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
+ \s%p2%s,
+ pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
+
+att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415,
+
+att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415-rv,
+
+att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415-w,
+
+att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415-w-rv,
+
+att5420_2|AT&T 5420 model 2 80 cols,
+ am, db, hs, mir, msgr, xon,
+ cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
+ cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
+ cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
+ el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
+ home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ indn=\E[%p1%dE, invis=\E[8m,
+ is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
+ \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
+ \E[29;0j\E[1;24r,
+ kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
+ kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
+ kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
+ kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
+ kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
+ lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
+ mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
+ pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
+ %s\E~,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
+ rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
+ sc=\E7,
+ sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;,
+ sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
+att5420_2-w|AT&T 5420 model 2 in 132 column mode,
+ cols#132,
+ is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
+ \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
+ \E[29;0j\E[1;24r,
+ use=att5420_2,
+
+att4418|att5418|AT&T 5418 80 cols,
+ am, xon,
+ cols#80, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
+ ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n,
+ is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
+ kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
+ kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
+ kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
+ kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
+ kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
+ rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
+ sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
+att4418-w|att5418-w|AT&T 5418 132 cols,
+ cols#132,
+ is1=\E[?3h, use=att5418,
+
+att4420|tty4420|teletype 4420,
+ OTbs, da, db, eo, msgr, ul, xon,
+ cols#80, lines#24, lm#72,
+ bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
+ dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
+ kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
+ kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
+ lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
+ rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
+
+# The following is a terminfo entry for the Teletype 4424
+# asynchronous keyboard-display terminal. It supports
+# the vi editor. The terminal must be set up as follows,
+#
+# HIGHLIGHT DEFINITION 3-TONE
+# DISPLAY FUNCTION GROUP III
+#
+# The second entry below provides limited (a la adm3a)
+# operation under GROUP II.
+#
+# This must be used with DISPLAY FUNCTION GROUP I or III
+# and HIGHLIGHT DEFINITION 3-TONE
+# The terminal has either bold or blink, depending on options
+#
+# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
+att4424|tty4424|teletype 4424,
+ OTbs, am, xon,
+ cols#80, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
+ dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
+ ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h,
+ kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
+ rmul=\EZ,
+ sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%|
+ %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;,
+ sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
+ tbc=\EF,
+
+att4424-1|tty4424-1|teletype 4424 in display function group I,
+ kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
+ use=att4424,
+
+# This entry is not one of AT&T's official ones, it was translated from the
+# 4.4BSD termcap file. The highlight strings are different from att4424.
+# I have no idea why this is -- older firmware version, maybe?
+# The following two lines are the comment originally attached to the entry:
+# This entry appears to avoid the top line - I have no idea why.
+# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
+att4424m|tty4424m|teletype 4424M,
+ am, da, db, mir,
+ cols#80, it#8, lines#23,
+ bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
+ dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
+ is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+
+# The Teletype 5425 is really version 2 of the Teletype 5420. It
+# is quite similar, except for some minor differences. No page
+# mode, for example, so all of the <cup> sequences used above have
+# to change back to what's being used for the 5410. Many of the
+# option settings have changed their numbering as well.
+#
+# This has been tested on a preliminary model.
+#
+# (att5425: added <rmam>/<smam> based on the init string -- esr)
+att5425|tty5425|att4425|AT&T 4425/5425,
+ am, da, db, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
+ el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
+ hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
+ invis=\E[8m, is1=\E<\E[?3l$<100>,
+ is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
+ \E[4i\Ex\E[25;1j\212,
+ is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
+ kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
+ kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
+ kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
+ nel=\r\n,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
+ rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
+ rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
+ sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
+ %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
+ vpa=\E[%p1%{1}%+%dd,
+
+att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
+ smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
+
+att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
+ cols#132, lm#54, wsl#97,
+ is1=\E[?3h$<100>, use=tty5425,
+
+# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
+# I also added <rmam>/<smam> -- esr)
+att4426|tty4426|teletype 4426S,
+ am, da, db, xon,
+ cols#80, lines#24, lm#48,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
+ cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
+ hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
+ il=\E[%p1%dL, il1=\EL, ind=\n, indn=\E[%p1%dS,
+ is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
+ kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
+ kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
+ nel=\r\n, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
+ rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
+ rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
+ smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%p1%dd,
+
+# Terminfo entry for the AT&T 510 A Personal Terminal
+# Function keys 9 - 16 are available only after the
+# screen labeled (soft keys/action blocks) are labeled. Function key
+# 9 corresponds to the leftmost touch target on the screen,
+# function key 16 corresponds to the rightmost.
+#
+# This entry is based on one done by Ernie Rice at Summit, NJ and
+# changed by Anne Gallup, Skokie, IL, ttrdc!anne
+att510a|bct510a|AT&T 510A Personal Terminal,
+ am, mir, msgr, xenl, xon,
+ cols#80, lh#2, lines#24, lw#7, nlab#8,
+ acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
+ dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
+ el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
+ hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l,
+ is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
+ kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
+ kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
+ kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
+ mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
+ pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
+ sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
+ %|%t;7%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g,
+
+# Terminfo entry for the AT&T 510 D Personal Terminal
+# Function keys 9 through 16 are accessed by bringing up the
+# system blocks.
+# Function key 9 corresponds to the leftmost touch target on the screen,
+# function key 16 corresponds to the rightmost.
+#
+# There are problems with soft key labeling. These are due to
+# strangenesses in the native terminal that are impossible to
+# describe in a terminfo.
+att510d|bct510d|AT&T 510D Personal Terminal,
+ am, da, db, mir, msgr, xenl, xon,
+ cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
+ acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD,
+ cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
+ el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
+ hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
+ invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
+ kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
+ kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
+ kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
+ kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
+ mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
+ pln=\E[%p1%dp%p2%:-16s, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
+ rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
+ rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
+ rs2=\E[5;0|, sc=\E7,
+ sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
+ %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
+ smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
+ smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
+
+# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
+att500|att513|AT&T 513 using page mode,
+ am, chts, mir, msgr, xenl, xon,
+ cols#80, lh#2, lines#24, lw#8, nlab#8,
+ acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
+ csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ indn=\E[%p1%dE, invis=\E[8m,
+ is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
+ kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+ kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+ kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
+ kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
+ kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
+ kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
+ kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
+ kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
+ kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
+ khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
+ kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
+ kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
+ kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
+ ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
+ mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
+ nel=\EE,
+ pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
+ \s%p2%s,
+ pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
+ \s%p2%s,
+ pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
+ pln=\E[%p1%dp%p2%:-16s, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
+ rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
+ rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
+ rmul=\E[m,
+ rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
+ \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
+ rs2=\E[5;0|, sc=\E7,
+ sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h,
+ smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
+
+# 01-07-88
+# printer must be set to EMUL ANSI to accept ESC codes
+# <cuu1> stops at top margin
+# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
+# and alt font ascii,wrap on,tabs cleared
+# <is2> disables newline on LF,Emphasized off
+# The <u0> capability sets form length
+att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
+ xhpa, xvpa,
+ bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10,
+ orhi#100, orl#12, orvi#72,
+ cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
+ %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
+ %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
+ \E[8w%;,
+ cr=\r,
+ csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
+ nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
+ %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
+ %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
+ %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
+ y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
+ aic%;,
+ cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
+ ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
+ lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
+ %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
+ rshm=\E[m,
+ scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
+ %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
+ %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
+ \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
+ \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
+ \E(}%;,
+ smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
+ smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
+ u0=\E[%p1%dt, vpa=\E[%p1%dd,
+
+# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
+# The following SET-UP modes are assumed for normal operation:
+# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements. This termcap description is for the Resident Terminal Mode.
+# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# The BRL entry also said: UNSAFE :ll=\E[70H:
+att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
+ am, xon,
+ cols#88, it#8, lines#70, vt#3,
+ bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
+ kll=\E[70;1H, nel=\r\n, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
+ rs1=\Ec, sc=\E7,
+
+# 5620 terminfo (2.0 or later ROMS with char attributes)
+# The following SET-UP modes are assumed for normal operation:
+# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements. This termcap description is for Resident Terminal Mode. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# assumptions: <ind> (scroll forward one line) is only done at screen bottom
+# Be aware that older versions of the dmd have a firmware bug that affects
+# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
+# <msgr> is from an otherwise inferior BRL for this terminal. That entry
+# also has <ll>=\E[70H commented out and marked unsafe.
+# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
+att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
+ OTbs, am, msgr, npc, xon,
+ cols#88, it#8, lines#70,
+ bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
+ cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\n,
+ pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
+ rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
+ sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
+att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
+ lines#24, use=att5620,
+att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
+ lines#34, use=att5620,
+# 5620 layer running the "S" system's downloaded graphics handler:
+att5620-s|tty5620-s|layer|vitty|5620 S layer,
+ OTbs, OTpt, am,
+ cols#80, it#8, lines#72,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
+ cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
+ el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
+ kll=\E[70;1H,
+
+# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
+#
+# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
+# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
+att605|AT&T 605 80 column 102key keyboard,
+ am, eo, xon,
+ cols#80, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
+ il1=\E[L, ind=\n, invis=\E[8m,
+ is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
+ kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
+ kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
+ kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
+ kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
+ kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
+ kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
+ kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
+ kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
+ kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
+ kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
+ kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
+ mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
+ rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
+ smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%i%p1%dx,
+att605-pc|ATT 605 in pc term mode,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
+ \263,
+ cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
+ dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
+ kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
+ kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
+ rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
+ xoffc=g, xonc=e, use=att605,
+att605-w|AT&T 605-w 132 column 102 key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
+# (att610: I added <rmam>/<smam> based on the init string. I also
+# added <indn> and <rin> because the BSD file says the att615s have them,
+# and the 615 is like a 610 with a big keyboard, and most of their other
+# smart terminals support the same sequence -- esr)
+att610|AT&T 610; 80 column; 98key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ indn=\E[%p1%dS, invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
+ nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
+ rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
+att610-w|AT&T 610; 132 column; 98key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att610,
+
+att610-103k|AT&T 610; 80 column; 103key keyboard,
+ kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+ kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+ kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
+ kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
+ kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
+ kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
+ kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
+ kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
+ khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
+ knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
+ kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
+ krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
+ kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
+att610-103k-w|AT&T 610; 132 column; 103key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att610-103k,
+att615|AT&T 615; 80 column; 98key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
+ kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
+ kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
+ kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
+ kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
+att615-w|AT&T 615; 132 column; 98key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
+ kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
+ kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
+ kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
+ kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
+att615-103k|AT&T 615; 80 column; 103key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
+att615-103k-w|AT&T 615; 132 column; 103key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
+# (att620: I added <rmam>/<smam> based on the init string and
+# <rin>/<indn> from a BSD termcap -- esr)
+att620|AT&T 620; 80 column; 98key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ indn=\E[%p1%dS, invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
+ kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
+ kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
+ kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
+ kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
+ kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
+ kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+ kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
+ mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
+ rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
+ rs2=\Ec\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
+ sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
+ smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%i%p1%dx,
+att620-w|AT&T 620; 132 column; 98key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att620,
+att620-103k|AT&T 620; 80 column; 103key keyboard,
+ kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+ kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+ kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
+ kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
+ kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
+ kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
+ kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
+ kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
+ kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
+ kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
+ kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
+ kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
+ kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
+ kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
+ kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
+ ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
+
+att620-103k-w|AT&T 620; 132 column; 103key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att620-103k,
+
+# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
+# The following SETUP modes are assumed for normal operation:
+# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
+# Font_Size=Large Non-Layers_Window_Cols=80
+# Non-Layers_Window_Rows=60
+# Other SETUP modes may be set for operator convenience or communication
+# requirements. Some capabilities assume a printer attached to the Aux EIA
+# port. This termcap description is for the Fixed Non-Layers Window. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
+att630|AT&T 630 windowing terminal,
+ OTbs, am, da, db, mir, msgr, npc, xon,
+ cols#80, it#8, lines#60, lm#0,
+ bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
+ kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=\r,
+ kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
+ kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
+ kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
+ kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
+ mc5=\E[?5i, nel=\r\n, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
+ rmul=\E[m, rs2=\Ec, sc=\E7,
+ sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
+ %;m,
+ sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
+ lines#24, use=att630,
+
+# This is the att700 entry for 700 native emulation of the AT&T 700
+# terminal. Comments are relative to changes from the 605V2 entry and
+# att730 on which the entry is based. Comments show the terminfo
+# capability name, termcap name, and description.
+#
+# Here is what's going onm in the init string:
+# ESC [ 50;4| set 700 native mode (really is 605)
+# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
+# ESC [ 53;0| set GenFlow to Xon/Xoff
+# ESC [ 8 ;0| set CR on NL
+# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
+# ESC [ ? 4 l jump scroll
+# ESC [ ? 5 l/h video: normal (l); reverse (h)
+# ESC [ ?13 l Labels on
+# ESC [ ?15 l parity check = no
+# ESC [ 13 l monitor mode off
+# ESC [ 20 l LF on NL (not CRLF on NL)
+# ESC [ ? 7 h autowrap on
+# ESC [ 12 h local echo off
+# ESC ( B GO = ASCII
+# ESC ) 0 G1 = Special Char & Line Drawing
+# ESC [ ? 31 l Set 7 bit controls
+#
+# Note: Most terminals, especially the 600 family use Reverse Video for
+# standout mode. DEC also uses reverse video. The VT100 uses bold in addition
+# Assume we should stay with reverse video for 70.. However, the 605V2 exits
+# standout mode with \E[m (all normal attributes). The 730 entry simply
+# exits reverse video which would leave other current attributes intact. It
+# was assumed the 730 entry to be more correct so rmso has changed. The
+# 605V2 has no sequences to turn individual attributes off, thus its setting
+# and the rmso/smso settings from the 730.
+#
+# Note: For the same reason as above in rmso I changed exit under-score mode
+# to specifically turn off underscore, rather than return to all normal
+# attributes
+#
+# Note: The following pkey_xmit is taken from the 605V2 which contained the
+# capability as pfxl. It was changed here to pfx since pfxl
+# will only compile successfully with Unix 4.0 tic. Also note that pfx only
+# allows strings to be parameters and label values must be programmed as
+# constant strings. Supposedly the pfxl of Version 4.0 allows both labels
+# and strings to be parameters. The 605V2 pfx entry should be examined later
+# in this regard. For reference the 730 pfxl entry is shown here for comparison
+# 730 pfx entry:
+# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
+# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
+#
+# (for 4.0 tic)
+# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+#
+# (for <4.0 tic)
+# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+#
+# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
+#
+# Port1 Interface
+#
+# modular 10 pin Connector
+# Left side Right side
+# Pin 1 2 3 4 5 6 7 8 9 10
+#
+# Key (notch) at bottom
+#
+# Pin 1 DSR
+# 3 DCD
+# 4 DTR
+# 5 Sig Ground
+# 6 RD
+# 7 SD
+# 8 CTS
+# 9 RTS
+# 10 Frame Ground
+#
+# The manual is 189 pages and is loaded with details about the escape codes,
+# etc..... Available from AT&T CIC 800-432-6600...
+# ask for Document number 999-300-660..
+#
+att700|AT&T 700 24x80 column display w/102key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
+ fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
+ is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
+ \E(B\E)0\E[?31l\E[0m\017,
+ is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
+ kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
+ kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
+ kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
+ kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
+ kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
+ kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
+ kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
+ kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
+ mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
+ \s\s\s\s\s\s%;%p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
+ rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
+ smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
+ tsl=\E7\E[99;%i%p1%dx,
+
+# This entry was modified 3/13/90 by JWE.
+# fixes include additions of <enacs>, correcting <rep>, and modification
+# of <kHOM>. (See comments below)
+# att730 has status line of 80 chars
+# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
+# the <kf25> and up keys are used for shifted system Fkeys
+# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
+# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
+# and 122 key keyboards, the 730's translation is \E[2J. For consistency
+# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
+# 102, 102+1, or 122 key keyboards
+# kHOM=\E[2J,
+# (att730: I added <rmam>/<smam> based on the init string -- esr)
+att730|AT&T 730 windowing terminal,
+ am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
+ cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
+ home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\ED, invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
+ kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
+ kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
+ kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
+ kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
+ kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
+ kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
+ kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
+ mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
+ %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
+ pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
+ rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
+ swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
+att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
+ lines#41, use=att730,
+att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
+ lines#24, use=att730,
+att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
+ flash=\E[?5l$<200>\E[?5h,
+ is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
+att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
+ lines#41, use=att730r,
+att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
+ lines#24, use=att730r,
+
+# The following represents the screen layout along with the associated
+# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
+# not appear on the screen but are shown to reference the bezel buttons.
+# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
+# position relative to the screen.
+#
+#
+#
+# +----------------------------------------------------------------+
+# | |
+# XXXX | kf0 kf24 | XXXX
+# | |
+# | |
+# XXXX | kf1 kf23 | XXXX
+# | |
+# | |
+# XXXX | kf2 kf22 | XXXX
+# | |
+# | |
+# XXXX | kf3 kf21 | XXXX
+# | |
+# | |
+# XXXX | kf4 kf20 | XXXX
+# | |
+# | |
+# XXXX | kf5 kf19 | XXXX
+# | |
+# | |
+# XXXX | kf6 kf18 | XXXX
+# | |
+# | |
+# XXXX | | XXXX
+# | |
+# | |
+# +----------------------------------------------------------------+
+#
+# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
+#
+# Note: XXXX represents the screen buttons
+# CMD REDRAW
+#
+# MAIL
+#
+# version 1 note:
+# The character string sent by key 'kf26' may be user programmable
+# to send either \E[16s, or \E[26s.
+# The character string sent by key 'krfr' may be user programmable
+# to send either \E[17s, or \E[27s.
+#
+# Depression of the "CMD" key sends \E! (kcmd)
+# Depression of the "MAIL" key sends \E[26s (kf26)
+# "REDRAW" same as "REFRESH" (krfr)
+#
+# "kf" functions adds carriage return to output string if terminal is in
+# 'new line' mode.
+#
+# The following are functions not covered in the table above:
+#
+# Set keyboard character (SKC): \EPn1;Pn2w
+# Pn1= 0 Back Space key
+# Pn1= 1 Break key
+# Pn2= Program char (hex)
+#
+# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
+# Pn1= Window number (1-39)
+# Pn2-Pn5= Y;X;Y;X coordinates
+#
+# Screen Selection (SSL): \E[Pnu
+# Pn= Window number
+#
+# Set Terminal Modes (SM): \E[Pnh
+# Pn= 3 Graphics mode
+# Pn= > Cursor blink
+# Pn= < Enter new line mode
+# Pn= = Enter reverse insert/replace mode
+# Pn= ? Enter no scroll mode
+#
+# Reset Terminal Mode (RM): \E[Pnl
+# Pn= 3 Exit graphics mode
+# Pn= > Exit cursor blink
+# Pn= < Exit new line mode
+# Pn= = Exit reverse insert/replace mode
+# Pn= ? Exit no scroll mode
+#
+# Screen Status Report (SSR): \E[Pnp
+# Pn= 0 Request current window number
+# Pn= 1 Request current window dimensions
+#
+# Device Status Report (DSR): \E[6n Request cursor position
+#
+# Call Status Report (CSR): \E[Pnv
+# Pn= 0 Call failed
+# Pn= 1 Call successful
+#
+# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
+# Pn1= Button number to be loaded
+# Pn2= Character count of "string"
+# Pn3= Key mode being loaded:
+# 0= Unshifted
+# 1= Shifted
+# 2= Control
+# String= Text string (15 chars max)
+#
+# Screen Number Report (SNR): \E[Pnp
+# Pn= Screen number
+#
+# Screen Dimension Report (SDR): \E[Pn1;Pn2r
+# Pn1= Number of rows available in window
+# Pn2= Number of columns available in window
+#
+# Cursor Position Report (CPR): \E[Pn1;Pn2R
+# Pn1= "Y" Position of cursor
+# Pn2= "X" Position of cursor
+#
+# Request Answer Back (RAB): \E[c
+#
+# Answer Back Response (ABR): \E[?;*;30;VSV
+# *= 0 No printer available
+# *= 2 Printer available
+# V= Software version number
+# SV= Software sub version number
+# (printer-available field not documented in v1)
+#
+# Screen Alignment Aid: \En
+#
+# Bell (lower pitch): \E[x
+#
+# Dial Phone Number: \EPdstring\
+# string= Phone number to be dialed
+#
+# Set Phone Labels: \EPpstring\
+# string= Label for phone buttons
+#
+# Set Clock: \EPchour;minute;second\
+#
+# Position Clock: \EPsY;X\
+# Y= "Y" coordinate
+# X= "X" coordinate
+#
+# Delete Clock: \Epr\
+#
+# Programming The Function Buttons: \EPfPn;string\
+# Pn= Button number (00-06, 18-24)
+# (kf00-kf06, kf18-kf24)
+# string= Text to sent on button depression
+#
+# The following in version 2 only:
+#
+# Request For Local Directory Data: \EPp12;\
+#
+# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
+#
+# Request for Local Directory Data in print format: \EPp13;\
+#
+# Enable 'Prt on Line' mode: \022 (DC2)
+#
+# Disable 'Prt on Line' mode: \024 (DC4)
+#
+
+# 05-Aug-86:
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 2 and later.
+att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
+ am, xon,
+ cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
+ cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
+ il=\E[%p1%dL, il1=\E[L, ind=\n,
+ is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
+ kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
+ kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
+ kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
+ kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
+ krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
+ rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
+ rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
+ smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
+
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 1.
+att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
+ lines#24,
+ mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
+tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
+ lines#22, use=att505,
+#
+#### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
+# This cut mark helps make life less painful for people running ncurses tic
+# on machines with relatively little RAM. The file can be broken in half here
+# cleanly and compiled in sections -- no `use' references cross this cut
+# going forward.
+#
+
+#### Ampex (Dialogue)
+#
+# Yes, these are the same people who are better-known for making audio- and
+# videotape. I'm told they are located in Redwood City, CA.
+#
+
+# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
+# (ampex80: some capabilities merged in from SCO's entry -- esr)
+ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
+ OTbs, am, bw, ul,
+ cols#80, it#8, lines#24,
+ bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
+ ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
+ smso=\Ej, smul=\El, tbc=\E3,
+# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
+ampex175|ampex d175,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
+ is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
+ kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
+ rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
+# No backspace key in the main QWERTY cluster. Fortunately, it has a
+# NEWLINE/PAGE key just above RETURN that sends a strange single-character
+# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
+# mode), this key can be used as the erase key; I find I like this. Because
+# some people and some systems may not, there is another termcap ("ampex175")
+# that suppresses this little eccentricity by omitting the relevant capability.
+ampex175-b|ampex d175 using left arrow for erase,
+ kbs=^_, use=ampex175,
+# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
+# (ampex210: removed obsolete ":kn#10:" -- esr)
+ampex210|a210|ampex a210,
+ OTbs, am, hs, xenl,
+ cols#80, it#8, lines#24, xmc#1,
+ cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
+ fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
+ if=/usr/share/tabset/std, il1=\EE, invis@,
+ is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
+ kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
+ kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
+ kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
+ tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
+# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
+# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
+# and moved the padding to be *after* the caps -- esr)
+ampex219|ampex-219|amp219|Ampex with Automargins,
+ hs, xenl,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
+ clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
+ csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
+ cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
+ cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
+ el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
+ is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
+ kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
+ rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
+ rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
+ smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
+ampex219w|ampex-219w|amp219w|Ampex 132 cols,
+ cols#132, lines#24,
+ bel=^G, cr=\r, cud1=\n, ind=\n,
+ is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
+# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
+ampex232|ampex-232|Ampex Model 232,
+ am,
+ cols#80, lines#24, xmc#1,
+ cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
+ flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
+ invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
+ kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
+ kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
+ kf9=^AI\r, khome=^^, use=adm+sgr,
+# (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
+ampex232w|Ampex Model 232 / 132 columns,
+ cols#132, lines#24,
+ is2=\E\034Eg\El, use=ampex232,
+
+#### Ann Arbor (aa)
+#
+# Ann Arbor made dream terminals for hackers -- large screen sizes and huge
+# numbers of function keys. At least some used monitors in portrait mode,
+# allowing up to 76-character screen heights! They were reachable at:
+#
+# Ann Arbor Terminals
+# 6175 Jackson Road
+# Ann Arbor, MI 48103
+# (313)-663-8000
+#
+# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
+# can't be found on the Web; I fear they're long dead. R.I.P.
+#
+
+
+# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
+# Highly modified 6/22 by Mike O'Brien.
+# split out into several for the various screen sizes by dave-yost@rand
+# Modifications made 3/82 by Mark Horton
+# Modified by Tom Quarles at UCB for greater efficiency and more diversity
+# status line moved to top of screen, <flash> removed 5/82
+# Some unknown person at SCO then hacked the init strings to make them more
+# efficient.
+#
+# assumes the following setup:
+# A menu: 0000 1010 0001 0000
+# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
+# C menu: 56 66 0 0 9600 0110 1100
+# D menu: 0110 1001 1 0
+#
+# Briefly, the settings are for the following modes:
+# (values are for bit set/clear with * indicating our preference
+# and the value used to test these termcaps)
+# Note that many of these settings are irrelevant to the terminfo
+# and are just set to the default mode of the terminal as shipped
+# by the factory.
+#
+# A menu: 0000 1010 0001 0000
+# Block/underline cursor*
+# blinking/nonblinking cursor*
+# key click/no key click*
+# bell/no bell at column 72*
+#
+# key pad is cursor control*/key pad is numeric
+# return and line feed/return for <cr> key *
+# repeat after .5 sec*/no repeat
+# repeat at 25/15 chars per sec. *
+#
+# hold data until pause pressed/process data unless pause pressed*
+# slow scroll/no slow scroll*
+# Hold in area/don't hold in area*
+# functions keys have default*/function keys disabled on powerup
+#
+# show/don't show position of cursor during page transmit*
+# unused
+# unused
+# unused
+#
+# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
+# Baud rate (9600*)
+#
+# 2 bits of parity - 00=odd,01=even*,10=space,11=mark
+# 1 stop bit*/2 stop bits
+# parity error detection off*/on
+#
+# keyboard local/on line*
+# half/full duplex*
+# disable/do not disable keyboard after data transmission*
+#
+# transmit entire page/stop transmission at cursor*
+# transfer/do not transfer protected characters*
+# transmit all characters/transmit only selected characters*
+# transmit all selected areas/transmit only 1 selected area*
+#
+# transmit/do not transmit line separators to host*
+# transmit/do not transmit page tab stops tabs to host*
+# transmit/do not transmit column tab stop tabs to host*
+# transmit/do not transmit graphics control (underline,inverse..)*
+#
+# enable*/disable auto XON/XOFF control
+# require/do not require receipt of a DC1 from host after each LF*
+# pause key acts as a meta key/pause key is pause*
+# unused
+#
+# unused
+# unused
+# unused
+# unused
+#
+# XON character (17*)
+# XOFF character (19*)
+#
+# C menu: 56 66 0 0 9600 0110 1100
+# number of lines to print data on (printer) (56*)
+#
+# number of lines on a sheet of paper (printer) (66*)
+#
+# left margin (printer) (0*)
+#
+# number of pad chars on new line to printer (0*)
+#
+# printer baud rate (9600*)
+#
+# printer parity: 00=odd,01=even*,10=space,11=mark
+# printer stop bits: 2*/1
+# print/do not print guarded areas*
+#
+# new line is: 01=LF,10=CR,11=CRLF*
+# unused
+# unused
+#
+# D menu: 0110 1001 1 0
+# LF is newline/LF is down one line, same column*
+# wrap to preceding line if move left from col 1*/don't wrap
+# wrap to next line if move right from col 80*/don't wrap
+# backspace is/is not destructive*
+#
+# display*/ignore DEL character
+# display will not/will scroll*
+# page/column tab stops*
+# erase everything*/erase unprotected only
+#
+# editing extent: 0=display,1=line*,2=field,3=area
+#
+# unused
+#
+
+annarbor4080|aa4080|ann arbor 4080,
+ OTbs, am,
+ cols#80, lines#40,
+ bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
+ cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
+ %{12}%+%;%{64}%+%c,
+ cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
+ kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
+
+# Strange Ann Arbor terminal from BRL
+aas1901|Ann Arbor K4080 w/S1901 mod,
+ am,
+ cols#80, lines#40,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
+ home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
+ nel=\r\n,
+
+# If you're using the GNU termcap library, add
+# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
+# to these capabilities. This is the nonstandard GNU termcap scrolling
+# capability, arguments are:
+# 1. Total number of lines on the screen.
+# 2. Number of lines above desired scroll region.
+# 3. Number of lines below (outside of) desired scroll region.
+# 4. Total number of lines on the screen, the same as the first parameter.
+# The generic Ann Arbor entry is the only one that uses this.
+aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
+ OTbs, am, km, mc5i, mir, xon,
+ cols#80, it#8,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
+ hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
+ il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
+ is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
+ kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
+ kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
+ kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
+ kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
+ kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
+ khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
+ mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
+ rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
+ \\,
+ rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
+ %;%?%p7%t8;%;m,
+ sgr0=\E[m,
+ smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
+ \\,
+ smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%p1%{1}%+%dd,
+
+aaa+rv|ann arbor ambassador in reverse video,
+ blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
+ is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
+ rs1=\E[H\E[7m\E[J$<156>,
+ sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;
+ %;%?%p7%t8;%;m\016,
+ sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
+# Ambassador with the DEC option, for partial vt100 compatibility.
+aaa+dec|ann arbor ambassador in dec vt100 mode,
+ acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
+ csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
+ sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
+ %p7%t8;%;m%?%p9%t\017%e\016%;,
+ smacs=^O,
+aaa-18|ann arbor ambassador/18 lines,
+ lines#18,
+ is2=\E7\E[60;0;0;18p\E8,
+ rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
+ use=aaa+unk,
+aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
+ use=aaa+rv, use=aaa-18,
+aaa-20|ann arbor ambassador/20 lines,
+ lines#20,
+ is2=\E7\E[60;0;0;20p\E8,
+ rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
+ use=aaa+unk,
+aaa-22|ann arbor ambassador/22 lines,
+ lines#22,
+ is2=\E7\E[60;0;0;22p\E8,
+ rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
+ use=aaa+unk,
+aaa-24|ann arbor ambassador/24 lines,
+ lines#24,
+ is2=\E7\E[60;0;0;24p\E8,
+ rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
+ use=aaa+unk,
+aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
+ use=aaa+rv, use=aaa-24,
+aaa-26|ann arbor ambassador/26 lines,
+ lines#26,
+ is2=\E7\E[60;0;0;26p\E8,
+ rmcup=\E[60;0;0;26p\E[26;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
+aaa-28|ann arbor ambassador/28 lines,
+ lines#28,
+ is2=\E7\E[60;0;0;28p\E8,
+ rmcup=\E[60;0;0;28p\E[28;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
+aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
+ eslok, hs,
+ lines#29,
+ dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
+ fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
+ rmcup=\E[60;1;0;30p\E[29;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
+ tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
+aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
+ use=aaa+rv, use=aaa-30-s,
+aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
+ rmcup=\E[60;1;0;30p\E[59;1H\E[K,
+ smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
+aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
+ rmcup=\E[60;1;0;30p\E[59;1H\E[K,
+ smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
+aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
+ lines#30,
+ is2=\E7\E[60;0;0;30p\E8,
+ rmcup=\E[60;0;0;30p\E[30;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
+aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
+ use=aaa+rv, use=aaa-30,
+aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
+ rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
+ use=aaa-30,
+aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
+ rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
+ use=aaa+rv, use=aaa-30,
+aaa-36|ann arbor ambassador/36 lines,
+ lines#36,
+ is2=\E7\E[60;0;0;36p\E8,
+ rmcup=\E[60;0;0;36p\E[36;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
+aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
+ use=aaa+rv, use=aaa-36,
+aaa-40|ann arbor ambassador/40 lines,
+ lines#40,
+ is2=\E7\E[60;0;0;40p\E8,
+ rmcup=\E[60;0;0;40p\E[40;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
+aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
+ use=aaa+rv, use=aaa-40,
+aaa-48|ann arbor ambassador/48 lines,
+ lines#48,
+ is2=\E7\E[60;0;0;48p\E8,
+ rmcup=\E[60;0;0;48p\E[48;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
+aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
+ use=aaa+rv, use=aaa-48,
+aaa-60-s|ann arbor ambassador/59 lines+status,
+ eslok, hs,
+ lines#59,
+ dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
+ fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
+ tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
+aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
+ use=aaa+rv, use=aaa-60-s,
+aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
+ use=aaa+dec, use=aaa+rv, use=aaa-60-s,
+aaa-60|ann arbor ambassador/60 lines,
+ lines#60,
+ is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
+ use=aaa+unk,
+aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
+ use=aaa+rv, use=aaa-60,
+aaa-db|ann arbor ambassador 30/destructive backspace,
+ OTbs@,
+ cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
+
+guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
+ lines#33,
+ flash=\E[>59h$<100>\E[>59l,
+ is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
+ rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
+guru+rv|guru changes for reverse video,
+ flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
+guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
+ use=guru+rv, use=guru-33,
+guru+s|guru status line,
+ eslok, hs,
+ dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
+ rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
+ tsl=\E[>51h\E[1;%p1%dH\E[2K,
+guru-nctxt|guru with no saved context,
+ smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
+guru-s|guru-33-s|ann arbor guru/33 lines+status,
+ lines#32,
+ is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
+ smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-24|ann arbor guru 24 lines,
+ cols#80, lines#24,
+ is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
+ use=guru+unk,
+guru-44|ann arbor guru 44 lines,
+ cols#97, lines#44,
+ is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
+ use=guru+unk,
+guru-44-s|ann arbor guru/44 lines+status,
+ lines#43,
+ is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
+ smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-76|guru with 76 lines by 89 cols,
+ cols#89, lines#76,
+ is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+guru-76-s|ann arbor guru/76 lines+status,
+ cols#89, lines#75,
+ is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
+ smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-76-lp|guru-lp|guru with page bigger than line printer,
+ cols#134, lines#76,
+ is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+guru-76-w|guru 76 lines by 178 cols,
+ cols#178, lines#76,
+ is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+guru-76-w-s|ann arbor guru/76 lines+status+wide,
+ cols#178, lines#75,
+ is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
+ smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
+ cols#178, lines#76,
+ is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+aaa-rv-unk|ann arbor unknown type,
+ lh#0, lw#0, nlab#0,
+ blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
+ is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
+ rs1=\E[H\E[7m\E[J,
+ sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
+ 7;%;%?%p7%t8;%;m,
+ sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
+
+#### Applied Digital Data Systems (adds)
+#
+# ADDS itself is long gone. ADDS was bought by NCR, and the same group made
+# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
+# terminals was merged again. Then AT&T sold the terminal business to
+# SunRiver, which later changed its name to Boundless Technologies. The
+# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
+# as of early 1995) are at: