-# The first one that we had would lock out the keyboard of you
-# sent lots of short lines (like /usr/dict/words) at 9600 baud.
-# Try that on your C108 and see if it sends a ^S when you type it.
-# If so, you have an old version of the PROMs.
-#
-# You should configure the C108 to send ^S/^Q before running this.
-# It is much faster (at 9600 baud) than the c100 because the delays
-# are not fixed.
-# new status line display entries for c108-8p:
-# <is3> - init str #3 - setup term for status display -
-# set programmer mode, select window 2, define window at last
-# line of memory, set bkgnd stat mesg there, select window 0.
-#
-# <tsl> - to status line - select window 2, home cursor, erase to
-# end-of-window, 1/2 bright on, goto(line#0, col#?)
-#
-# <fsl> - from status line - 1/2 bright off, select window 0
-#
-# <dsl> - disable status display - set bkgnd status mesg with
-# illegal window #
-#
-# There are probably more function keys that should be added but
-# I don't know what they are.
-#
-# No delays needed on c108 because of ^S/^Q handshaking
-#
-c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
- is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
- rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
-c108-4p|concept108-4p|concept 108 w/4 pages,
- OTbs, eslok, hs, xon,
- pb@,
- acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
- cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
- cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
- ind=^J, is1=\EK\E!\E F,
- is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
- rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
- smcup=\EU\Ev 8p\Ep\r\E\025,
- tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
-c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
- rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
- use=c108-rv-4p,
-c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
- flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
- use=c108-4p,
-c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
- cols#132,
- is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
- smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
-
-# Concept 100:
-# These have only window relative cursor addressing, not screen
-# relative. To get it to work right here, smcup/rmcup (which
-# were invented for the concept) lock you into a one page
-# window for screen style programs.
-#
-# To get out of the one page window, we use a clever trick:
-# we set the window size to zero ("\Ev " in rmcup) which the
-# terminal recognizes as an error and resets the window to all
-# of memory.
-#
-# This trick works on c100 but does not on c108, sigh.
-#
-# Some tty drivers use cr3 for concept, others use nl3, hence
-# the delays on cr and ind below. This padding is only needed at
-# 9600 baud and up. One or the other is commented out depending on
-# local conventions.
-#
-# 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
-# less than 6 but more than 2 will work.
-#
-# Note: can't use function keys f7-f10 because they are
-# indistinguishable from arrow keys (!), also, del char and
-# clear eol use xon/xoff so they probably won't work very well.
-#
-# Also note that we don't define insrt/del char/delline/eop/send
-# because they don't transmit unless we reset them - I figured
-# it was a bad idea to clobber their definitions.
-#
-# The <mc5> sequence changes the escape character to ^^ so that
-# escapes will be passed through to the printer. Only trouble
-# is that ^^ won't be - ^^ was chosen to be unlikely.
-# Unfortunately, if you're sending raster bits through to be
-# plotted, any character you choose will be likely, so we lose.
-#
-# \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
-# cannot be # in is2 because it will hang a c100 with no printer
-# if sent twice.
-c100|concept100|concept|c104|c100-4p|hds concept 100,
- OTbs, am, eo, mir, ul, xenl,
- cols#80, lines#24, pb#9600, vt#8,
- bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
- cub1=^H, cud1=^J, cuf1=\E=,
- cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
- dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
- ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
- ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
- is1=\EK,
- is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
- is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
- kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
- kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
- kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
- khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
- kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
- mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
- rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
- rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
- rmso=\Ed, rmul=\Eg, sgr0=\EN@,
- smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
- smso=\ED, smul=\EG,
-c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
- cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
- smso=\EE, use=c100,
-oc100|oconcept|c100-1p|old 1 page concept 100,
- in,
- is3@, use=c100,
-
-# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
-# Lots of notes, originally inline, but ncurses doesn't grok that.
-#
-# am: not available in power on mode, but turned on with \E[=107;207h in
-# is2=. Also, \E=124l in is2= could have been used to prevent needing
-# to specify xenl:, but that would have rendered the last space on the
-# last line useless.
-# bw: Not available in power on mode, but turned on with \E[=107;207h in
-# is2=.
-# clear: Could be done with \E[2J alone, except that vi (and probably most
-# other programs) assume that this also homes the cursor.
-# dsl: Go to window 2, go to the beginning of the line, use a line feed to
-# scroll the window, and go back to window 1.
-# is2: the string may cause a warning to be issued by tic that it
-# found a very long line and that it suspects that a comma is missing
-# somewhere. This warning can be ignored (unless it comes up more than
-# once). The initialization string contains the following commands:
-#
-# [Setup mode items changed from factory defaults:]
-# \E)0 set alternate character set to
-# graphics
-# ^O set character set to default
-# [In case it wasn't]
-# \E[m turn off all attributes
-# [In case they weren't off]
-# \E[=107; cursor wrap and
-# 207h character wrap on
-# \E[90;3u set Fkey definitions to "transmit"
-# defaults
-# \E[92;3u set cursor key definitions to
-# "transmit" defaults
-# \E[43;1u set shift F13 to transmit...
-# \177\E$P\177
-# \E[44;1u set shift F14 to transmit...
-# \177\E$Q\177
-# \E[45;1u set shift F15 to transmit...
-# \177\E$R\177
-# \E[46;1u set shift F16 to transmit...
-# \177\E$S\177
-# \E[200;1u set shift up to transmit...
-# \177\E$A\177
-# \E[201;1u set shift down to transmit...
-# \177\E$B\177
-# \E[202;1u set shift right to transmit...
-# \177\E$C\177
-# \E[203;1u set shift left to transmit...
-# \177\E$D\177
-# \E[204;1u set shift home to transmit...
-# \177\E$H\177
-# \E[212;1u set backtab to transmit...
-# \177\E$I\177
-# \E[213;1u set shift backspace to transmit...
-# \177\E$^H\177
-# \E[214;1u set shift del to transmit...
-# "\E$\177"
-# [Necessary items not mentioned in setup mode:]
-# \E[2!w move to window 2
-# \E[25;25w define window as line 25 of memory
-# \E[!w move to window 1
-# \E[2*w show current line of window 2 as
-# status line
-# \E[2+x set meta key to use high bit
-# \E[;3+} move underline to bottom of character
-#
-# All Fkeys are set to their default transmit definitions with \E[90;3u
-# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
-# setting MUST be redefined or deactivated, because the default is
-# contained in almost all of this terminal's Fkey strings! If for some
-# reason "quit" cannot be altered, the Fkeys can, but it would be
-# necessary to change ^| to ^] in all of these definitions, and add
-# \E[2;029!t to is2.
-# lines: is set to 24 because this terminal refuses to treat the 25th
-# line normally.
-# ll: Not available in power on mode, but turned on with \E[=107;207h in
-# is2=.
-# lm: Pointless, given that this definition locks a single screen of
-# memory into view, but what the hey...
-# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
-# other attributes alone), but some programs expect this to turn off
-# everything.
-# rmul: Could use \E[4!{ to turn off only underline (leaving any other
-# attributes alone), but some programs expect this to turn off
-# everything.
-# sgr: Attributes are set on this terminal with the string \E[ followed by
-# a list of attribute code numbers (in decimal, separated by
-# semicolons), followed by the character m. The attribute code
-# numbers are:
-# 1 for bold;
-# 2 for dim (which is ignored in power on mode);
-# 4 for underline;
-# 5 for blinking;
-# 7 for inverse;
-# 8 for not displayable; and
-# =99 for protected (except that there are strange side
-# effects to protected characters which make them inadvisable).
-# The mapping of terminfo parameters to attributes is as follows:
-# %p1 (standout) = bold and inverse together;
-# %p2 (underline) = underline;
-# %p3 (reverse) = inverse;
-# %p4 (blink) = blinking;
-# %p5 (dim) is ignored;
-# %p6 (bold) = bold;
-# %p7 (invisible) = not displayable;
-# %p8 (protected) is ignored; and
-# %p9 (alt char set) = alt char set.
-# The code to do this is:
-# \E[0 OUTPUT \E[0
-# %?%p1%p6%O IF (standout; bold) OR
-# %t;1 THEN OUTPUT ;1
-# %; ENDIF
-# %?%p2 IF underline
-# %t;4 THEN OUTPUT ;4
-# %; ENDIF
-# %?%p4 IF blink
-# %t;5 THEN OUTPUT ;5
-# %; ENDIF
-# %?%p1%p3%O IF (standout; reverse) OR
-# %t;7 THEN OUTPUT ;7
-# %; ENDIF
-# %?%p7 IF invisible
-# %t;8 THEN OUTPUT ;8
-# %; ENDIF
-# m OUTPUT m
-# %?%p9 IF altcharset
-# %t^N THEN OUTPUT ^N
-# %e^O ELSE OUTPUT ^O
-# %; ENDIF
-# sgr0: Everything is turned off (including alternate character set), since
-# there is no way of knowing what it is that the program wants turned
-# off.
-# smul: The "underline" attribute is reconfigurable to an overline or
-# strikethru, or (as done with \E[;3+} in is2=), to a line at the true
-# bottom of the character cell. This was done to allow for more readable
-# underlined characters, and to be able to distinguish between an
-# underlined space, an underscore, and an underlined underscore.
-# xenl: Terminal can be configured to not need this, but this "glitch"
-# behavior is actually preferable with autowrap terminals.
-#
-# Parameters kf31= thru kf53= actually contain the strings sent by the shifted
-# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
-# string modifies the 'O' in kf43 to kf46 to a '$'.
-#
-# kcbt was originally ^I but redefined in is2=.
-# kHOM was \E[H originally but redefined in is2=, as were a number of
-# other keys.
-# kDC was originally \177 but redefined in is2=.
-#
-# kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
-# tsl: Go to window 2, then do an hpa=.
-#
-#------- flash=\E[8;3!}^G\E[3;3!}
-#------- flash=\E[?5h$<100>\E[?5l
-# There are two ways to flash the screen, both of which have their drawbacks.
-# The first is to set the bell mode to video, transmit a bell character, and
-# set the bell mode back - but to what? There is no way of knowing what the
-# user's old bell setting was before we messed with it. Worse, the command to
-# set the bell mode also sets the key click volume, and there is no way to say
-# "leave that alone", or to know what it's set to, either.
-# The second way to do a flash is to set the screen to inverse video, pad for a
-# tenth of a second, and set it back - but like before, there's no way to know
-# that the screen wasn't ALREADY in inverse video, or that the user may prefer
-# it that way. The point is moot anyway, since vi (and probably other
-# programs) assume that by defining flash=, you want the computer to use it
-# INSTEAD of bel=, rather than as a secondary type of signal.
-#
-#------- cvvis=\E[+{
-# The is the power on setting, which is also as visible as the cursor
-# gets.
-#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
-# Windowing is possible, but not defined here because it is also used to
-# emulate status line functions. Allowing a program to set a window could
-# clobber the status line or render it unusable. There is additional memory,
-# but screen scroll functions are destructive and do not make use of it.
-#
-#------- dim= Not available in power on mode.
-# You have a choice of defining low intensity characters as "half bright" and
-# high intensity as "normal", or defining low as "normal" and high as "bold".
-# No matter which you choose, only one of either "half bright" or "bold" is
-# available at any time, so taking the time to override the default is
-# pointless.
-#
-#------- prot=\E[=0;99m
-# Not defined, because it appears to have some strange side effects.
-#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
-#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
-#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
-# Available, but making them available to programs is inadvisable.
-# The code to do this is:
-# %?%p1%{24}%< IF ((key; 24) <;
-# %p1%{30}%> ((key; 30) >;
-# %p1%{54}%< (key; 54) <
-# %A ) AND
-# %O ) OR
-# [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
-# %t\E[ THEN OUTPUT \E[
-# %p1%d OUTPUT (key) as decimal
-# [next line applies to pfx only]
-# ;1 OUTPUT ;1
-# u OUTPUT u
-# \177 OUTPUT \177
-# %p2%s OUTPUT (string) as string
-# \177 OUTPUT \177
-# [DEL chosen as delimiter, but could be any character]
-# [implied: ELSE do nothing]
-# %; ENDIF
-#
-#------- rs2=
-# Not defined since anything it might do could be done faster and easier with
-# either Meta-Shift-Reset or the main power switch.
-#
-#------- smkx=\E[1!z
-#------- rmkx=\E[!z
-# These sequences apply to the cursor and setup keys only, not to the
-# numeric keypad. But it doesn't matter anyway, since making these
-# available to programs is inadvisable.
-# For the key definitions below, all sequences beginning with \E$ are
-# custom and programmed into the terminal via is2. \E$ also has no
-# meaning to any other terminal.
-#
-#------- cmdch=\E[;%p1%d!t
-# Available, but making it available to programs is inadvisable.
-#------- smxon=\E[1*q
-# Available, but making it available to programs is inadvisable.
-# Terminal will send XON/XOFF on buffer overflow.
-#------- rmxon=\E[*q
-# Available, but making it available to programs is inadvisable.
-# Terminal will not notify on buffer overflow.
-#------- smm=\E[2+x
-#------- rmm=\E[+x
-# Available, but making them available to programs is inadvisable.
-#
-# Printing:
-# It's not made clear in the manuals, but based on other ansi/vt type
-# terminals, it's a good guess that this terminal is capable of both
-# "transparent print" (which doesn't copy data to the screen, and
-# therefore needs mc5i: specified to say so) and "auxilliary print"
-# (which does duplicate printed data on the screen, in which case mc4=
-# and mc5= should use the \E[?4i and \E[?5i strings instead).
-
-hds200|Human Designed Systems HDS200,
- am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
- cols#80, it#8, lines#24, lm#0,
- acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
- blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
- clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
- fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
- invis=\E[0;8m,
- is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
- kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
- kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
- kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
- kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
- kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
- kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
- kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
- kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
- kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
- kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
- kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
- kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
- kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
- kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
- mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
- rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
- rmul=\E[m\017, sc=\E7,
- sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
- smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
- vpa=\E[%i%p1%dd,
-
-# <ht> through <el> included to specify padding needed in raw mode.
-# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
-avt-ns|concept avt no status line,
- OTbs, am, eo, mir, ul, xenl, xon,
- cols#80, it#8, lines#24, lm#192,
- acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
- clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
- dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
- hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
- invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
- is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
- kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
- kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
- mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
- pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
- prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
- ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
- rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
- sc=\E7,
- sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
- sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
- smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
-avt-rv-ns|concept avt in reverse video mode/no status line,
- flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
- use=avt-ns,
-avt-w-ns|concept avt in 132 column mode/no status line,
- is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
- use=avt-ns,
-avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
- flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
- smcup=\E[H\E[1;24;1;132w, use=avt-ns,
-
-# Concept AVT with status line. We get the status line using the
-# "Background status line" feature of the terminal. We swipe the
-# first line of memory in window 2 for the status line, keeping
-# 191 lines of memory and 24 screen lines for regular use.
-# The first line is used instead of the last so that this works
-# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
-# assumes an 8 page AVT but lm isn't currently used anywhere.)
-#
-avt+s|concept avt status line changes,
- eslok, hs,
- lm#191,
- dsl=\E[0*w, fsl=\E[1;1!w,
- is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
- rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
- tsl=\E[2;1!w\E[;%p1%dH\E[2K,
-avt|avt-s|concept-avt|avt w/80 columns,
- use=avt+s, use=avt-ns,
-avt-rv|avt-rv-s|avt reverse video w/sl,
- flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
- use=avt+s, use=avt-ns,
-avt-w|avt-w-s|concept avt 132 cols+status,
- is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
- use=avt+s, use=avt-ns,
-avt-w-rv|avt-w-rv-s|avt wide+status+rv,
- flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
- smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
-
-#### Contel Business Systems.
-#
-
-# Contel c300 and c320 terminals.
-contel300|contel320|c300|Contel Business Systems C-300 or C-320,
- am, in, xon,
- cols#80, lines#24, xmc#1,
- bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
- dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
- el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
- hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
- kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
- kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
- rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
-# Contel c301 and c321 terminals.
-contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
- flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
- use=contel300,
-
-#### Data General (dg)
-#
-# According to James Carlson <carlson@xylogics.com> writing in January 1995,
-# the terminals group at Data General was shut down in 1991; all these
-# terminals have thus been discontinued.
-#
-# DG terminals have function keys that respond to the SHIFT and CTRL keys,
-# e.g., SHIFT-F1 generates a different code from F1. To number the keys
-# sequentially, first the unmodified key codes are listed as F1 through F15.
-# Then their SHIFT versions are listed as F16 through F30, their CTRL versions
-# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
-# F46 through F60. This is done in the private "includes" below whose names
-# start with "dgkeys+".
-#
-# DG terminals generally support 8 bit characters. For each of these terminals
-# two descriptions are supplied:
-# 1) A default description for 8 bits/character communications, which
-# uses the default DG international character set and keyboard codes.
-# 2) A description with suffix "-7b" for 7 bits/character communications.
-# This description must use the NON-DEFAULT native keyboard language.
-
-# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
-# Ctrl/Shift fdkeys (kf34-kf44).
-
-dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
- ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
- kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
- kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
- kf11=\233011z, kf12=\233012z, kf13=\233013z,
- kf14=\233014z, kf15=\233000z, kf16=\233101z,
- kf17=\233102z, kf18=\233103z, kf19=\233104z,
- kf2=\233002z, kf20=\233105z, kf21=\233106z,
- kf22=\233107z, kf23=\233108z, kf24=\233109z,
- kf25=\233110z, kf26=\233111z, kf27=\233112z,
- kf28=\233113z, kf29=\233114z, kf3=\233003z,
- kf30=\233100z, kf31=\233201z, kf32=\233202z,
- kf33=\233203z, kf34=\233204z, kf35=\233205z,
- kf36=\233206z, kf37=\233207z, kf38=\233208z,
- kf39=\233209z, kf4=\233004z, kf40=\233210z,
- kf41=\233211z, kf42=\233212z, kf43=\233213z,
- kf44=\233214z, kf45=\233200z, kf46=\233301z,
- kf47=\233302z, kf48=\233303z, kf49=\233304z,
- kf5=\233005z, kf50=\233305z, kf51=\233306z,
- kf52=\233307z, kf53=\233308z, kf54=\233309z,
- kf55=\233310z, kf56=\233311z, kf57=\233312z,
- kf58=\233313z, kf59=\233314z, kf6=\233006z,
- kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
- khome=\233H, kprt=\233i,
-
-dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
- ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
- kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
- kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
- kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
- kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
- kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
- kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
- kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
- kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
- kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
- kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
- kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
- kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
- kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
- kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
- kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
- kf9=\E[009z, khome=\E[H, kprt=\E[i,
-
-dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
- kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
- kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
- kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
- kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
- kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
- kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
- kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
- kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
- kf8=^^x, kf9=^^y, khome=^H,
-
-dgkeys+15|Private entry describing 15 DG mode special keys,
- kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
- kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
- kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
- kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
- kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
- kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
- kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
- kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
- kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
- kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
- kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
- kf9=^^y,
-
-# Data General color terminals use the "Tektronix" color model. The total
-# number of colors varies with the terminal model, as does support for
-# attributes used in conjunction with color.
-
-# Removed u7, u8 definitions since they conflict with tack:
-# Preserve user-defined colors in at least some cases.
-# u7=^^Fh,
-# Default is ACM mode.
-# u8=^^F}20^^Fi^^F}21,
-#
-dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
- bce,
- colors#16, ncv#53, pairs#256,
- op=\036Ad\036Bd,
- setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
- setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
- setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
-
-dg+fixed|Fixed color info for DG D430C terminals in DG mode,
- use=dgunix+fixed,
-
-# Video attributes are coordinated using static variables set by "sgr", then
-# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
-# (D=dim, U=underline, B=blink, R=reverse.)
-dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
- bce,
- colors#8, ncv#16, pairs#64,
- op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
- setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
-
-dg+color|Color info for Data General D470C terminals in ANSI mode,
- colors#16, ncv#53, pairs#256,
- setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- use=dg+color8,
-
-dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
- bce,
- colors#8, ncv#16, pairs#64,
- op=\036Ad\036Bd,
- setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
- setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
- setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
-
-dgmode+color|Color info for Data General D470C terminals in DG mode,
- colors#16, pairs#256,
- setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
- setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
- use=dgmode+color8,
-
-dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
- bce, ccc,
- colors#52, ncv#53, pairs#26,
- initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
- oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
- op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
- scp=\036RG2%p1%02X,
-
-# Colors are in the order: normal, reverse, dim, dim + reverse.
-dg+ccc|Configurable color info for DG D430C terminals in DG mode,
- bce, ccc,
- colors#52, ncv#53, pairs#26,
- initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
- oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
- op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
- scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
-
-# The generic DG terminal type (an 8-bit-clean subset of the 6053)
-# Initialization string 1 sets:
-# ^R - vertical scrolling enabled
-# ^C - blinking enabled
-dg-generic|Generic Data General terminal in DG mode,
- am, bw, msgr, xon,
- cols#80, lines#24,
- bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
- cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
- mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
- smul=^T, use=dgkeys+11,
-
-# According to the 4.4BSD termcap file, the dg200 <cup> should be the
-# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
-# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
-# maybe they were originally nuls (which would fit).
-
-dg200|data general dasher 200,
- OTbs, am, bw,
- cols#80, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
- cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
- kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
- kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
- kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
- smso=^^D, smul=^T,
-
-# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
-dg210|dg-ansi|Data General 210/211,
- am,
- cols#80, lines#24,
- OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
- home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
- smso=\E[7;m, smul=\E[4;m,
-# From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
-# courtesy of Carlos Rucalde of Vantage Software, Inc.
-# (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
-# I suspect the d200 function keys actually work on the dg211, check it out.)
-dg211|Data General d211,
- cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
- kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
- rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
-
-# dg450 from Cornell (not official)
-dg450|dg6134|data general 6134,
- cub1@, cuf1=^X, use=dg200,
-
-# Not official...
-# Note: lesser Dasher terminals will not work with vi because vi insists upon
-# having a command to move straight down from any position on the bottom line
-# and scroll the screen up, or a direct vertical scroll command. The 460 and
-# above have both, the D210/211, for instance, has neither. We must use ANSI
-# mode rather than DG mode because standard UNIX tty drivers assume that ^H is
-# backspace on all terminals. This is not so in DG mode.
-# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
-# grounds that there is no matching ":ml:"
-dg460-ansi|Data General Dasher 460 in ANSI-mode,
- OTbs, am, msgr, ul,
- cols#80, it#8, lines#24,
- OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
- cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
- dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
- ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
- kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
- kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
- lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
- mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
- sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m,
- sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
- u7=\E[6n, u8=\E[5n, u9=\E[0n,
-# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
-# Data General 605x
-# Ought to work for a Model 6242, Type D210 as well as a 605x.
-# Note that the cursor-down key transmits ^Z. Job control users, beware!
-# This also matches a posted description of something called a `Dasher 100'
-# so there's a dg100 alias here.
-# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
-dg6053-old|dg100|data general 6053,
- OTbs, am, bw, ul,
- cols#80, lines#24,
- OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
- cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
- home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
- kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
- kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
- rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
- smul=^T,