+# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
+# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
+# 50 lines entries; 132 columns
+pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
+ cols#132, lines#25,
+ is2=\E[1;25r\E[25;1H, use=pcvtXX,
+pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
+ cols#132, lines#28,
+ is2=\E[1;28r\E[28;1H, use=pcvtXX,
+pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
+ cols#132, lines#35,
+ is2=\E[1;35r\E[35;1H, use=pcvtXX,
+pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
+ cols#132, lines#40,
+ is2=\E[1;40r\E[40;1H, use=pcvtXX,
+pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
+ cols#132, lines#43,
+ is2=\E[1;43r\E[43;1H, use=pcvtXX,
+pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
+ cols#132, lines#50,
+ is2=\E[1;50r\E[50;1H, use=pcvtXX,
+
+# OpenBSD implements a color variation
+pcvt25-color|dec vt220 emulation with 25 lines and color,
+ cols#80, lines#25,
+ is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
+ kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
+ use=ecma+color,
+
+# Terminfo entries to enable the use of the ncurses library in colour on a
+# NetBSD-arm32 console (only tested on a RiscPC).
+# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
+# modified codes for setf/setb to setaf/setab, then to klone+color, corrected
+# typo in invis - TD
+arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
+ am, bce, msgr, xenl, xon,
+ cols#80, it#8, lines#30,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
+ invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
+ kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
+ kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
+ kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
+ rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
+ rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
+ use=klone+color,
+
+arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
+ cols#132, lines#50, use=arm100,
+
+# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
+# manufactured by Sharp for the Japanese market.
+# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
+x68k|x68k-ite|NetBSD/x68k ITE,
+ cols#96, lines#32,
+ kclr=\E[9~, khlp=\E[28~, use=vt220-base,
+
+# <tv@pobox.com>:
+# Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
+#
+# (still unfinished, but good enough so far.)
+ofcons|DNARD OpenFirmware console,
+ bw,
+ cols#80, lines#30,
+ bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
+ cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
+ cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
+ cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
+ dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
+ flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
+ il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
+ kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
+ kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
+ kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
+ kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
+ rmso=\2330m, rmul=\2330m,
+ sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
+ %;%?%p1%p3%|%t;7%;m,
+ sgr0=\2330m, smso=\2337m, smul=\2334m,
+
+# NetBSD "wscons" emulator in vt220 mode.
+# This entry is based on the NetBSD termcap entry, correcting the ncv value.
+# The emulator renders underlined text in red. Colors are otherwise usable.
+#
+# Testing the emulator and reading the source code (NetBSD 2.0), it appears
+# that "vt220" is inaccurate. There are a few vt220-features, but most of the
+# vt220 screens in vttest do not work with this emulator. For instance, it
+# identifies itself (primary DA response) as a vt220 with selective erase. But
+# the selective erase feature does not work. The secondary response is copied
+# from Kermit's emulation of vt220, does not correspond to actual vt220. At
+# the level of detail in a termcap, it is a passable emulator, since ECH does
+# work. Don't use it on a VMS system -TD
+wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
+ bce, msgr,
+ colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
+ is2=\E[r\E[25;1H, kdch1=\E[3~, kend=\E[8~, kf1=\E[11~,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
+ kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
+
+wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
+ km, use=wsvt25,
+
+# NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
+#
+# TERM is by default vt100 for the console, wsvt25 for other ttys.
+# Initial testing set TERM=xterm, based on comments by developers, found too
+# many differences to continue in that path. However, test-results may be
+# useful to people curious about compatibility with xterm.
+#
+# Testing with tack:
+# -----------------
+# Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
+# There is color-bleeding in the color-pairs screen.
+# Attributes do not work with color
+# Failed: vpa/hpa
+# Failed: kf1-kf4, kf13-kf48, khome, kend
+# (effectively xterm-r6 for function-keys)
+# None of the function or cursor key-modifiers are encoded.
+# Console hangs in the smm/rmm test if TERM=xterm, does not show test
+#
+# Testing with vttest:
+# -------------------
+# Identifies as vt220 with selective erase
+# (however, selective erase refers to DECSCA, SPA)
+# Does not implement vt52
+# Uses spaces to simulate double-size characters
+# Does not support 8-bit controls
+# Does not support VT220 reports
+# Does not support send/receive mode
+# Supports ECH (like rxvt)
+# Does not support DECSCA
+# Does not support any of the ISO-6429 cursor-movement
+# Does not support any of the ISO-6429 miscellaneous tests
+# (SL/SR also leave unexpected char on screen too)
+# Background does not change in menu 11.6.9 (SGR 22-27)
+# None of the xterm special features tests work
+netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
+ kbs=^?, use=wsvt25,
+
+# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
+# DECstation/pmax.
+rcons|BSD rasterconsole,
+ use=sun-il,
+# Color version of above. Color currently only provided by NetBSD.
+rcons-color|BSD rasterconsole with ANSI color,
+ bce,
+ colors#8, pairs#64,
+ op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
+
+# mgterm -- MGL/MGL2, MobileGear Graphic Library
+# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
+# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
+# -- compare with cons25w
+mgterm|MGL/MGL2 MobileGear Graphic Library,
+ OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
+ colors#8, cols#80, it#8, lines#18, pairs#64,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
+ kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q,
+ kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
+ kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8,
+ rev=\E[7m, ri=\E[T, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
+ setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m,
+ vpa=\E[%i%p1%dd, use=ecma+index,
+
+#### FreeBSD console entries
+#
+# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
+# Andrey Chernov maintains the FreeBSD termcap distributions.
+#
+# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
+# or comment out the :cb: capability in the console entry.
+#
+# Alexander Lukyanov reports:
+# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
+# Now el1 clears not only to the line beginning, but also a large chunk
+# of previous line. But there is another bug - ech does not work at all.
+#
+
+# for syscons
+# common entry without semigraphics
+# Bug: The <op> capability resets attributes.
+# Bug? The ech and el1 attributes appear to move the cursor in some cases; for
+# instance el1 does if the cursor is moved to the right margin first. Removed
+# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
+#
+# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
+# Note that this disables standout with color.
+#
+# The emulator sends difference strings based on shift- and control-keys,
+# like scoansi:
+# F13-F24 are shifted F1-F12
+# F25-F36 are control F1-F12
+# F37-F48 are shift+control F1-F12
+cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
+ am, bce, bw, eo, msgr, npc,
+ colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
+ cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
+ kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a,
+ kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N,
+ kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j,
+ kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o,
+ kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s,
+ kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x,
+ kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[,
+ kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`,
+ kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
+ khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E,
+ op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rmso=\E[m,
+ rs2=\E[x\E[m\Ec, sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
+ %p6%t;1%;m,
+ sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, use=ecma+index,
+cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
+ acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
+ \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
+ \371,
+ use=cons25w,
+cons25-debian|freebsd console with debian backspace (25-line ansi mode),
+ kbs=^?, kdch1=\E[3~, use=cons25,
+cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
+ colors@, pairs@,
+ bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
+ sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
+ smul=\E[4m, use=cons25,
+cons30|ansi80x30|freebsd console (30-line ansi mode),
+ lines#30, use=cons25,
+cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
+ lines#30, use=cons25-m,
+cons43|ansi80x43|freebsd console (43-line ansi mode),
+ lines#43, use=cons25,
+cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
+ lines#43, use=cons25-m,
+cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
+ lines#50, use=cons25,
+cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
+ lines#50, use=cons25-m,
+cons60|ansi80x60|freebsd console (60-line ansi mode),
+ lines#60, use=cons25,
+cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
+ lines#60, use=cons25-m,
+cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
+ acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
+ \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
+ \225,
+ use=cons25w,
+cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
+ colors@, pairs@,
+ op@, rmul=\E[m, setab@, setaf@,
+ sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;30;1%;%?%p6%t;1%;m,
+ smul=\E[4m, use=cons25r,
+cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
+ lines#50, use=cons25r,
+cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
+ lines#50, use=cons25r-m,
+cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
+ lines#60, use=cons25r,
+cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
+ lines#60, use=cons25r-m,
+# ISO 8859-1 FreeBSD console
+cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
+ acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
+ \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
+ \226v\227w\230x\231y\232z\233~\237,
+ use=cons25w,
+cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
+ colors@, pairs@,
+ bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
+ sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
+ smul=\E[4m, use=cons25l1,
+cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
+ lines#50, use=cons25l1,
+cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
+ lines#50, use=cons25l1-m,
+cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
+ lines#60, use=cons25l1,
+cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
+ lines#60, use=cons25l1-m,
+
+# Starting with FreeBSD 8, an alternative configuration for syscons is provided,
+# which is intended to be xterm-compatible. See for example
+# http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
+# in particular scterm-teken.c
+#
+# For FreeBSD 9 and 10:
+# --------------------
+# The /etc/ttys entries for console and other ttys are all configured to set
+# TERM=xterm.
+#
+# Testing with tack:
+# There is no VT100 line-drawing (uses +'s and -'s)
+# Shifted f1-f12 give cons25 codes, rather than xterm function-keys
+#
+# Testing with vttest:
+# Menu 2 diamonds don't work, blink ditto, light background ditto
+# The terminal identifies itself as VT100 with AVO
+# There is no VT52 support
+# There is no doublesize character support
+# The terminal supports ECH (like rxvt)
+# The terminal does not support send/receive mode
+# The terminal supports all of the ISO-6429 cursor-movement
+# The terminal supports some of the ISO-6429 miscellaneous tests
+# (SL/SR also leave unexpected char on screen too)
+#
+# Considering cons25 as a base, the line-drawing mostly works, but is missing
+# the cells which happen to have ASCII control-character values:
+# - ^X arrow pointing up
+# . ^Y arrow pointing down
+# i ^Y lantern
+# ` ^D diamond
+#
+# Those are removed from this entry's acsc string to avoid confusion.
+# The resulting description provides correct line-drawing and function-keys -TD
+teken|syscons with teken,
+ bw@, mir, xenl,
+ acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
+ \304t\303u\264v\301w\302x\263y\363z\362~\371,
+ cvvis@, hpa=\E[%i%p1%dG, hts=\EH, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[F, kent=\r,
+ kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, rmir=\E[4l, smir=\E[4h, tbc=\E[3g,
+ u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+ vpa=\E[%i%p1%dd, use=vt220+cvis, use=cons25,
+
+#### 386BSD and BSD/OS Consoles
+#
+
+# This was the original 386BSD console entry (I think).
+# Some places it's named oldpc3|oldibmpc3.
+# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
+origpc3|origibmpc3|IBM PC 386BSD Console,
+ OTbs, am, bw, eo, xon,
+ cols#80, lines#25,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
+ \263,
+ bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
+ rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
+ smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
+
+# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
+oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
+ OTbs, km,
+ lines#25,
+ bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
+ ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
+ knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
+
+# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
+# Note, the emulator supports many of the additional console features
+# listed in the iBCS2 (e.g. character-set selection) though not all
+# are described here. This entry really ought to be upgraded.
+# Also note, the console will also work with fewer lines after doing
+# "stty rows NN", e.g. to use 24 lines.
+# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
+# Bug: The <op> capability resets attributes.
+bsdos-pc|IBM PC BSD/OS Console,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
+ %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ use=bsdos-pc-nobold,
+
+bsdos-pc-nobold|BSD/OS PC console w/o bold,
+ use=klone+color, use=bsdos-pc-m,
+
+bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
+ OTbs, am, eo, km, xon,
+ cols#80, it#8, lines#25,
+ bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
+ kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
+ sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
+ %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
+ use=klone+sgr8,
+
+# Old names for BSD/OS PC console used in releases before 4.1.
+pc3|BSD/OS on the PC Console,
+ use=bsdos-pc-nobold,
+ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
+ use=bsdos-pc,
+
+# BSD/OS on the SPARC
+bsdos-sparc|Sun SPARC BSD/OS Console,
+ use=sun,