+# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
+# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
+att605|AT&T 605 80 column 102key keyboard,
+ am, eo, xon,
+ cols#80, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
+ il1=\E[L, ind=^J, invis=\E[8m,
+ is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
+ kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
+ kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
+ kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
+ kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
+ kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
+ kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
+ kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
+ kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
+ kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
+ kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
+ kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
+ mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
+ rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
+ smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%i%p1%dx,
+att605-pc|ATT 605 in pc term mode,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
+ cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
+ dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
+ kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
+ kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
+ rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
+ xoffc=g, xonc=e, use=att605,
+att605-w|AT&T 605-w 132 column 102 key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
+ use=att605,
+# (att610: I added <rmam>/<smam> based on the init string. I also
+# added <indn> and <rin> because the BSD file says the att615s have them,
+# and the 615 is like a 610 with a big keyboard, and most of their other
+# smart terminals support the same sequence -- esr)
+att610|AT&T 610; 80 column; 98key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ indn=\E[%p1%dS, invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
+ nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
+ rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
+att610-w|AT&T 610; 132 column; 98key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att610,
+
+att610-103k|AT&T 610; 80 column; 103key keyboard,
+ kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+ kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+ kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
+ kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
+ kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
+ kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
+ kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
+ kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
+ khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
+ knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
+ kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
+ krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
+ kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
+att610-103k-w|AT&T 610; 132 column; 103key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att610-103k,
+att615|AT&T 615; 80 column; 98key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
+ kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
+ kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
+ kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
+ kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
+att615-w|AT&T 615; 132 column; 98key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
+ kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
+ kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
+ kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
+ kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
+att615-103k|AT&T 615; 80 column; 103key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
+att615-103k-w|AT&T 615; 132 column; 103key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
+# (att620: I added <rmam>/<smam> based on the init string and
+# <rin>/<indn> from a BSD termcap -- esr)
+att620|AT&T 620; 80 column; 98key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ indn=\E[%p1%dS, invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
+ kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
+ kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
+ kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
+ kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
+ kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
+ kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+ kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
+ mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
+ rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
+ rs2=\Ec\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
+ sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
+ smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%i%p1%dx,
+att620-w|AT&T 620; 132 column; 98key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att620,
+att620-103k|AT&T 620; 80 column; 103key keyboard,
+ kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+ kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+ kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
+ kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
+ kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
+ kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
+ kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
+ kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
+ kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
+ kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
+ kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
+ kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
+ kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
+ kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
+ kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
+ ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
+
+att620-103k-w|AT&T 620; 132 column; 103key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att620-103k,
+
+# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
+# The following SETUP modes are assumed for normal operation:
+# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
+# Font_Size=Large Non-Layers_Window_Cols=80
+# Non-Layers_Window_Rows=60
+# Other SETUP modes may be set for operator convenience or communication
+# requirements. Some capabilities assume a printer attached to the Aux EIA
+# port. This termcap description is for the Fixed Non-Layers Window. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
+att630|AT&T 630 windowing terminal,
+ OTbs, am, da, db, mir, msgr, npc, xon,
+ cols#80, it#8, lines#60, lm#0,
+ bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
+ kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
+ kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
+ kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
+ kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
+ kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
+ mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
+ rmul=\E[m, rs2=\Ec, sc=\E7,
+ sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7%;m,
+ sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
+ lines#24, use=att630,
+
+# This is the att700 entry for 700 native emulation of the AT&T 700
+# terminal. Comments are relative to changes from the 605V2 entry and
+# att730 on which the entry is based. Comments show the terminfo
+# capability name, termcap name, and description.
+#
+# Here is what's going onm in the init string:
+# ESC [ 50;4| set 700 native mode (really is 605)
+# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
+# ESC [ 53;0| set GenFlow to Xon/Xoff
+# ESC [ 8 ;0| set CR on NL
+# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
+# ESC [ ? 4 l jump scroll
+# ESC [ ? 5 l/h video: normal (l); reverse (h)
+# ESC [ ?13 l Labels on
+# ESC [ ?15 l parity check = no
+# ESC [ 13 l monitor mode off
+# ESC [ 20 l LF on NL (not CRLF on NL)
+# ESC [ ? 7 h autowrap on
+# ESC [ 12 h local echo off
+# ESC ( B GO = ASCII
+# ESC ) 0 G1 = Special Char & Line Drawing
+# ESC [ ? 31 l Set 7 bit controls
+#
+# Note: Most terminals, especially the 600 family use Reverse Video for
+# standout mode. DEC also uses reverse video. The VT100 uses bold in addition
+# Assume we should stay with reverse video for 70.. However, the 605V2 exits
+# standout mode with \E[m (all normal attributes). The 730 entry simply
+# exits reverse video which would leave other current attributes intact. It
+# was assumed the 730 entry to be more correct so rmso has changed. The
+# 605V2 has no sequences to turn individual attributes off, thus its setting
+# and the rmso/smso settings from the 730.
+#
+# Note: For the same reason as above in rmso I changed exit under-score mode
+# to specifically turn off underscore, rather than return to all normal
+# attributes
+#
+# Note: The following pkey_xmit is taken from the 605V2 which contained the
+# capability as pfxl. It was changed here to pfx since pfxl
+# will only compile successfully with Unix 4.0 tic. Also note that pfx only
+# allows strings to be parameters and label values must be programmed as
+# constant strings. Supposedly the pfxl of Version 4.0 allows both labels
+# and strings to be parameters. The 605V2 pfx entry should be examined later
+# in this regard. For reference the 730 pfxl entry is shown here for comparison
+# 730 pfx entry:
+# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
+# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
+#
+# (for 4.0 tic)
+# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+#
+# (for <4.0 tic)
+# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+#
+# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
+#
+# Port1 Interface
+#
+# modular 10 pin Connector
+# Left side Right side
+# Pin 1 2 3 4 5 6 7 8 9 10
+#
+# Key (notch) at bottom
+#
+# Pin 1 DSR
+# 3 DCD
+# 4 DTR
+# 5 Sig Ground
+# 6 RD
+# 7 SD
+# 8 CTS
+# 9 RTS
+# 10 Frame Ground
+#
+# The manual is 189 pages and is loaded with details about the escape codes,
+# etc..... Available from AT&T CIC 800-432-6600...
+# ask for Document number 999-300-660..
+#
+att700|AT&T 700 24x80 column display w/102key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
+ fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
+ is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
+ is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
+ kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
+ kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
+ kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
+ kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
+ kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
+ kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
+ kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
+ kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
+ mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
+ rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
+ smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
+ tsl=\E7\E[99;%i%p1%dx,
+
+# This entry was modified 3/13/90 by JWE.
+# fixes include additions of <enacs>, correcting <rep>, and modification
+# of <kHOM>. (See comments below)
+# att730 has status line of 80 chars
+# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
+# the <kf25> and up keys are used for shifted system Fkeys
+# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
+# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
+# and 122 key keyboards, the 730's translation is \E[2J. For consistency
+# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
+# 102, 102+1, or 122 key keyboards
+# kHOM=\E[2J,
+# (att730: I added <rmam>/<smam> based on the init string -- esr)
+att730|AT&T 730 windowing terminal,
+ am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
+ cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
+ home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\ED, invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
+ kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
+ kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
+ kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
+ kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
+ kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
+ kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
+ kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
+ mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
+ pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
+ rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
+ swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
+att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
+ lines#41, use=att730,
+att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
+ lines#24, use=att730,
+att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
+ flash=\E[?5l$<200>\E[?5h,
+ is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
+ use=att730,
+att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
+ lines#41, use=att730r,
+att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
+ lines#24, use=att730r,
+
+# The following represents the screen layout along with the associated
+# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
+# not appear on the screen but are shown to reference the bezel buttons.
+# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
+# position relative to the screen.
+#
+#
+#
+# +----------------------------------------------------------------+
+# | |
+# XXXX | kf0 kf24 | XXXX
+# | |
+# | |
+# XXXX | kf1 kf23 | XXXX
+# | |
+# | |
+# XXXX | kf2 kf22 | XXXX
+# | |
+# | |
+# XXXX | kf3 kf21 | XXXX
+# | |
+# | |
+# XXXX | kf4 kf20 | XXXX
+# | |
+# | |
+# XXXX | kf5 kf19 | XXXX
+# | |
+# | |
+# XXXX | kf6 kf18 | XXXX
+# | |
+# | |
+# XXXX | | XXXX
+# | |
+# | |
+# +----------------------------------------------------------------+
+#
+# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
+#
+# Note: XXXX represents the screen buttons
+# CMD REDRAW
+#
+# MAIL
+#
+# version 1 note:
+# The character string sent by key 'kf26' may be user programmable
+# to send either \E[16s, or \E[26s.
+# The character string sent by key 'krfr' may be user programmable
+# to send either \E[17s, or \E[27s.
+#
+# Depression of the "CMD" key sends \E! (kcmd)
+# Depression of the "MAIL" key sends \E[26s (kf26)
+# "REDRAW" same as "REFRESH" (krfr)
+#
+# "kf" functions adds carriage return to output string if terminal is in
+# 'new line' mode.
+#
+# The following are functions not covered in the table above:
+#
+# Set keyboard character (SKC): \EPn1;Pn2w
+# Pn1= 0 Back Space key
+# Pn1= 1 Break key
+# Pn2= Program char (hex)
+#
+# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
+# Pn1= Window number (1-39)
+# Pn2-Pn5= Y;X;Y;X coordinates
+#
+# Screen Selection (SSL): \E[Pnu
+# Pn= Window number
+#
+# Set Terminal Modes (SM): \E[Pnh
+# Pn= 3 Graphics mode
+# Pn= > Cursor blink
+# Pn= < Enter new line mode
+# Pn= = Enter reverse insert/replace mode
+# Pn= ? Enter no scroll mode
+#
+# Reset Terminal Mode (RM): \E[Pnl
+# Pn= 3 Exit graphics mode
+# Pn= > Exit cursor blink
+# Pn= < Exit new line mode
+# Pn= = Exit reverse insert/replace mode
+# Pn= ? Exit no scroll mode
+#
+# Screen Status Report (SSR): \E[Pnp
+# Pn= 0 Request current window number
+# Pn= 1 Request current window dimensions
+#
+# Device Status Report (DSR): \E[6n Request cursor position
+#
+# Call Status Report (CSR): \E[Pnv
+# Pn= 0 Call failed
+# Pn= 1 Call successful
+#
+# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
+# Pn1= Button number to be loaded
+# Pn2= Character count of "string"
+# Pn3= Key mode being loaded:
+# 0= Unshifted
+# 1= Shifted
+# 2= Control
+# String= Text string (15 chars max)
+#
+# Screen Number Report (SNR): \E[Pnp
+# Pn= Screen number
+#
+# Screen Dimension Report (SDR): \E[Pn1;Pn2r
+# Pn1= Number of rows available in window
+# Pn2= Number of columns available in window
+#
+# Cursor Position Report (CPR): \E[Pn1;Pn2R
+# Pn1= "Y" Position of cursor
+# Pn2= "X" Position of cursor
+#
+# Request Answer Back (RAB): \E[c
+#
+# Answer Back Response (ABR): \E[?;*;30;VSV
+# *= 0 No printer available
+# *= 2 Printer available
+# V= Software version number
+# SV= Software sub version number
+# (printer-available field not documented in v1)
+#
+# Screen Alignment Aid: \En
+#
+# Bell (lower pitch): \E[x
+#
+# Dial Phone Number: \EPdstring\
+# string= Phone number to be dialed
+#
+# Set Phone Labels: \EPpstring\
+# string= Label for phone buttons
+#
+# Set Clock: \EPchour;minute;second\
+#
+# Position Clock: \EPsY;X\
+# Y= "Y" coordinate
+# X= "X" coordinate
+#
+# Delete Clock: \Epr\
+#
+# Programming The Function Buttons: \EPfPn;string\
+# Pn= Button number (00-06, 18-24)
+# (kf00-kf06, kf18-kf24)
+# string= Text to sent on button depression
+#
+# The following in version 2 only:
+#
+# Request For Local Directory Data: \EPp12;\
+#
+# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
+#
+# Request for Local Directory Data in print format: \EPp13;\
+#
+# Enable 'Prt on Line' mode: \022 (DC2)
+#
+# Disable 'Prt on Line' mode: \024 (DC4)
+#
+
+# 05-Aug-86:
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 2 and later.
+att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
+ am, xon,
+ cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
+ cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
+ il=\E[%p1%dL, il1=\E[L, ind=^J,
+ is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
+ kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
+ kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
+ kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
+ kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
+ krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
+ rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
+ rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
+ smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
+
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 1.
+att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
+ lines#24,
+ mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
+tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
+ lines#22, use=att505,
+#
+#### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
+# This cut mark helps make life less painful for people running ncurses tic
+# on machines with relatively little RAM. The file can be broken in half here
+# cleanly and compiled in sections -- no `use' references cross this cut
+# going forward.
+#
+
+#### Ampex (Dialogue)
+#
+# Yes, these are the same people who are better-known for making audio- and
+# videotape. I'm told they are located in Redwood City, CA.
+#
+
+# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
+# (ampex80: some capabilities merged in from SCO's entry -- esr)
+ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
+ OTbs, am, bw, ul,
+ cols#80, it#8, lines#24,
+ bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
+ ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
+ smso=\Ej, smul=\El, tbc=\E3,
+# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
+ampex175|ampex d175,
+ am,