<!--
****************************************************************************
- * Copyright (c) 1998-2013,2014 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2014,2015 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: curs_initscr.3x,v 1.20 2014/03/01 22:31:22 tom Exp @
+ * @Id: curs_initscr.3x,v 1.24 2015/07/21 23:01:38 tom Exp @
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
<STRONG>WINDOW</STRONG> <STRONG>*initscr(void);</STRONG>
<STRONG>int</STRONG> <STRONG>endwin(void);</STRONG>
<STRONG>bool</STRONG> <STRONG>isendwin(void);</STRONG>
- <STRONG>SCREEN</STRONG> <STRONG>*newterm(char</STRONG> <STRONG>*type,</STRONG> <STRONG>FILE</STRONG> <STRONG>*outfd,</STRONG> <STRONG>FILE</STRONG> <STRONG>*infd);</STRONG>
- <STRONG>SCREEN</STRONG> <STRONG>*set_term(SCREEN</STRONG> <STRONG>*new);</STRONG>
- <STRONG>void</STRONG> <STRONG>delscreen(SCREEN*</STRONG> <STRONG>sp);</STRONG>
+ <STRONG>SCREEN</STRONG> <STRONG>*newterm(char</STRONG> <STRONG>*</STRONG><EM>type</EM><STRONG>,</STRONG> <STRONG>FILE</STRONG> <STRONG>*</STRONG><EM>outfd</EM><STRONG>,</STRONG> <STRONG>FILE</STRONG> <STRONG>*</STRONG><EM>infd</EM><STRONG>);</STRONG>
+ <STRONG>SCREEN</STRONG> <STRONG>*set_term(SCREEN</STRONG> <STRONG>*</STRONG><EM>new</EM><STRONG>);</STRONG>
+ <STRONG>void</STRONG> <STRONG>delscreen(SCREEN*</STRONG> <EM>sp</EM><STRONG>);</STRONG>
</PRE>
<H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
+
+</PRE>
+<H3><a name="h3-initscr">initscr</a></H3><PRE>
<STRONG>initscr</STRONG> is normally the first <STRONG>curses</STRONG> routine to call when
initializing a program. A few special routines sometimes
need to be called before it; these are <STRONG>slk_init</STRONG>, <STRONG>filter</STRONG>,
dard error and exits; otherwise, a pointer is returned to
<STRONG>stdscr</STRONG>.
+
+</PRE>
+<H3><a name="h3-newterm">newterm</a></H3><PRE>
A program that outputs to more than one terminal should
use the <STRONG>newterm</STRONG> routine for each terminal instead of
<STRONG>initscr</STRONG>. A program that needs to inspect capabilities, so
If the <EM>type</EM> parameter is <STRONG>NULL</STRONG>, <STRONG>$TERM</STRONG> will be used.
+
+</PRE>
+<H3><a name="h3-endwin">endwin</a></H3><PRE>
The program must also call <STRONG>endwin</STRONG> for each terminal being
used before exiting from <STRONG>curses</STRONG>. If <STRONG>newterm</STRONG> is called
more than once for the same terminal, the first terminal
Calling <STRONG>refresh</STRONG> or <STRONG>doupdate</STRONG> after a temporary escape caus-
es the program to resume visual mode.
+
+</PRE>
+<H3><a name="h3-isendwin">isendwin</a></H3><PRE>
The <STRONG>isendwin</STRONG> routine returns <STRONG>TRUE</STRONG> if <STRONG>endwin</STRONG> has been
called without any subsequent calls to <STRONG>wrefresh</STRONG>, and <STRONG>FALSE</STRONG>
otherwise.
+
+</PRE>
+<H3><a name="h3-set_term">set_term</a></H3><PRE>
The <STRONG>set_term</STRONG> routine is used to switch between different
terminals. The screen reference <STRONG>new</STRONG> becomes the new cur-
rent terminal. The previous terminal is returned by the
<STRONG>SCREEN</STRONG> pointers; all other routines affect only the cur-
rent terminal.
+
+</PRE>
+<H3><a name="h3-delscreen">delscreen</a></H3><PRE>
The <STRONG>delscreen</STRONG> routine frees storage associated with the
<STRONG>SCREEN</STRONG> data structure. The <STRONG>endwin</STRONG> routine does not do
this, so <STRONG>delscreen</STRONG> should be called after <STRONG>endwin</STRONG> if a par-
</PRE>
<H2><a name="h2-PORTABILITY">PORTABILITY</a></H2><PRE>
- These functions are described in the XSI Curses standard,
- Issue 4. It specifies that portable applications must not
- call <STRONG>initscr</STRONG> more than once.
+ These functions were described in the XSI Curses standard,
+ Issue 4. As of 2015, the current document is X/Open Curs-
+ es, Issue 7.
+
+
+</PRE>
+<H3><a name="h3-Differences">Differences</a></H3><PRE>
+ X/Open specifies that portable applications must not call
+ <STRONG>initscr</STRONG> more than once:
+
+ <STRONG>o</STRONG> The portable way to use <STRONG>initscr</STRONG> is once only, using
+ <STRONG>refresh</STRONG> (see <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>) to restore the screen
+ after <STRONG>endwin</STRONG>.
+
+ <STRONG>o</STRONG> This implementation allows using <STRONG>initscr</STRONG> after <STRONG>endwin</STRONG>.
Old versions of curses, e.g., BSD 4.4, may have returned a
- null pointer from <STRONG>initscr</STRONG> when an error is detected,
- rather than exiting. It is safe but redundant to check
+ null pointer from <STRONG>initscr</STRONG> when an error is detected,
+ rather than exiting. It is safe but redundant to check
the return value of <STRONG>initscr</STRONG> in XSI Curses.
+
+</PRE>
+<H3><a name="h3-Unset-TERM-Variable">Unset TERM Variable</a></H3><PRE>
If the TERM variable is missing or empty, <STRONG>initscr</STRONG> uses the
- value "unknown", which normally corresponds to a terminal
- entry with the <EM>generic</EM> (<EM>gn</EM>) capability. Generic entries
- are detected by <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG> and cannot be used for full-
- screen operation. Other implementations may handle a
- missing/empty TERM variable differently.
+ value "unknown", which normally corresponds to a terminal
+ entry with the <EM>generic</EM> (<EM>gn</EM>) capability. Generic entries
+ are detected by <STRONG>setupterm</STRONG> (see <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>) and can-
+ not be used for full-screen operation. Other implementa-
+ tions may handle a missing/empty TERM variable different-
+ ly.
+
+
+</PRE>
+<H3><a name="h3-Signal-Handlers">Signal Handlers</a></H3><PRE>
+ Quoting from X/Open Curses, section 3.1.1:
+
+ <EM>Curses</EM> <EM>implementations</EM> <EM>may</EM> <EM>provide</EM> <EM>for</EM> <EM>special</EM> <EM>han-</EM>
+ <EM>dling</EM> <EM>of</EM> <EM>the</EM> <EM>SIGINT,</EM> <EM>SIGQUIT</EM> <EM>and</EM> <EM>SIGTSTP</EM> <EM>signals</EM> <EM>if</EM>
+ <EM>their</EM> <EM>disposition</EM> <EM>is</EM> <EM>SIG</EM><STRONG>_</STRONG><EM>DFL</EM> <EM>at</EM> <EM>the</EM> <EM>time</EM> <STRONG>initscr()</STRONG> <EM>is</EM>
+ <EM>called</EM> <STRONG>...</STRONG>
+
+ <EM>Any</EM> <EM>special</EM> <EM>handling</EM> <EM>for</EM> <EM>these</EM> <EM>signals</EM> <EM>may</EM> <EM>remain</EM> <EM>in</EM>
+ <EM>effect</EM> <EM>for</EM> <EM>the</EM> <EM>life</EM> <EM>of</EM> <EM>the</EM> <EM>process</EM> <EM>or</EM> <EM>until</EM> <EM>the</EM>
+ <EM>process</EM> <EM>changes</EM> <EM>the</EM> <EM>disposition</EM> <EM>of</EM> <EM>the</EM> <EM>signal.</EM>
+
+ <EM>None</EM> <EM>of</EM> <EM>the</EM> <EM>Curses</EM> <EM>functions</EM> <EM>are</EM> <EM>required</EM> <EM>to</EM> <EM>be</EM> <EM>safe</EM>
+ <EM>with</EM> <EM>respect</EM> <EM>to</EM> <EM>signals</EM> ...
+
+ This implementation establishes signal handlers during
+ initialization, e.g., <STRONG>initscr</STRONG> or <STRONG>newterm</STRONG>. Applications
+ which must handle these signals should set up the corre-
+ sponding handlers <EM>after</EM> initializing the library:
+
+ <STRONG>SIGINT</STRONG>
+ The handler <EM>attempts</EM> to cleanup the screen on exit.
+ Although it <EM>usually</EM> works as expected, there are lim-
+ itations:
+
+ <STRONG>o</STRONG> Walking the <STRONG>SCREEN</STRONG> list is unsafe, since all list
+ management is done without any signal blocking.
+
+ <STRONG>o</STRONG> On systems which have <STRONG>REENTRANT</STRONG> turned on,
+ <STRONG>set_term</STRONG> uses functions which could deadlock or
+ misbehave in other ways.
+
+ <STRONG>o</STRONG> <STRONG>endwin</STRONG> calls other functions, many of which use
+ stdio or other library functions which are clear-
+ ly unsafe.
+
+ <STRONG>SIGTERM</STRONG>
+ This uses the same handler as <STRONG>SIGINT</STRONG>, with the same
+ limitations. It is not mentioned in X/Open Curses,
+ but is more suitable for this purpose than <STRONG>SIGQUIT</STRONG>
+ (which is used in debugging).
+
+ <STRONG>SIGTSTP</STRONG>
+ This handles the <EM>stop</EM> signal, used in job control.
+ When resuming the process, this implementation dis-
+ cards pending input with <STRONG>flushinput</STRONG> (see
+ <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>), and repaints the screen assuming that
+ it has been completely altered. It also updates the
+ saved terminal modes with <STRONG>def_shell_mode</STRONG> (see
+ <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>).
+
+ <STRONG>SIGWINCH</STRONG>
+ This handles the window-size changes which were ini-
+ tially ignored in the standardization efforts. The
+ handler sets a (signal-safe) variable which is later
+ tested in <STRONG>wgetch</STRONG> (see <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>). If <STRONG>keypad</STRONG> has
+ been enabled for the corresponding window, <STRONG>wgetch</STRONG> re-
+ turns the key symbol <STRONG>KEY_RESIZE</STRONG>. At the same time,
+ <STRONG>wgetch</STRONG> calls <STRONG>resizeterm</STRONG> to adjust the standard screen
+ <STRONG>stdscr</STRONG>, and update other data such as <STRONG>LINES</STRONG> and <STRONG>COLS</STRONG>.
</PRE>
<ul>
<li><a href="#h2-NAME">NAME</a></li>
<li><a href="#h2-SYNOPSIS">SYNOPSIS</a></li>
-<li><a href="#h2-DESCRIPTION">DESCRIPTION</a></li>
+<li><a href="#h2-DESCRIPTION">DESCRIPTION</a>
+<ul>
+<li><a href="#h3-initscr">initscr</a></li>
+<li><a href="#h3-newterm">newterm</a></li>
+<li><a href="#h3-endwin">endwin</a></li>
+<li><a href="#h3-isendwin">isendwin</a></li>
+<li><a href="#h3-set_term">set_term</a></li>
+<li><a href="#h3-delscreen">delscreen</a></li>
+</ul>
+</li>
<li><a href="#h2-RETURN-VALUE">RETURN VALUE</a></li>
<li><a href="#h2-NOTES">NOTES</a></li>
-<li><a href="#h2-PORTABILITY">PORTABILITY</a></li>
+<li><a href="#h2-PORTABILITY">PORTABILITY</a>
+<ul>
+<li><a href="#h3-Differences">Differences</a></li>
+<li><a href="#h3-Unset-TERM-Variable">Unset TERM Variable</a></li>
+<li><a href="#h3-Signal-Handlers">Signal Handlers</a></li>
+</ul>
+</li>
<li><a href="#h2-SEE-ALSO">SEE ALSO</a></li>
</ul>
</div>