-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
+<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<!--
****************************************************************************
- * Copyright (c) 1999-2006,2007 Free Software Foundation, Inc. *
+ * Copyright (c) 1999-2011,2013 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: curs_terminfo.3x,v 1.26 2007/02/24 16:37:50 tom Exp @
+ * @Id: curs_terminfo.3x,v 1.43 2013/07/20 19:29:59 tom Exp @
+ * ***************************************************************************
+ * ***************************************************************************
+ * ***************************************************************************
+ * ***************************************************************************
+ * ***************************************************************************
-->
<HTML>
<HEAD>
</PRE>
<H2>NAME</H2><PRE>
<STRONG>del_curterm</STRONG>, <STRONG>mvcur</STRONG>, <STRONG>putp</STRONG>, <STRONG>restartterm</STRONG>, <STRONG>set_curterm</STRONG>,
- <STRONG>setterm</STRONG>, <STRONG>setupterm</STRONG>, <STRONG>tigetflag</STRONG>, <STRONG>tigetnum</STRONG>, <STRONG>tigetstr</STRONG>, <STRONG>tparm</STRONG>,
- <STRONG>tputs</STRONG>, <STRONG>vid_attr</STRONG>, <STRONG>vid_puts</STRONG>, <STRONG>vidattr</STRONG>, <STRONG>vidputs</STRONG> - <STRONG>curses</STRONG>
- interfaces to terminfo database
+ <STRONG>setterm</STRONG>, <STRONG>setupterm</STRONG>, <STRONG>tigetflag</STRONG>, <STRONG>tigetnum</STRONG>, <STRONG>tigetstr</STRONG>, <STRONG>tiparm</STRONG>,
+ <STRONG>tparm</STRONG>, <STRONG>tputs</STRONG>, <STRONG>vid_attr</STRONG>, <STRONG>vid_puts</STRONG>, <STRONG>vidattr</STRONG>, <STRONG>vidputs</STRONG> -
+ <STRONG>curses</STRONG> interfaces to terminfo database
</PRE>
<STRONG>int</STRONG> <STRONG>putp(const</STRONG> <STRONG>char</STRONG> <STRONG>*</STRONG><EM>str</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>vidputs(chtype</STRONG> <EM>attrs</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>(*</STRONG><EM>putc</EM><STRONG>)(int));</STRONG>
<STRONG>int</STRONG> <STRONG>vidattr(chtype</STRONG> <EM>attrs</EM><STRONG>);</STRONG>
- <STRONG>int</STRONG> <STRONG>vid_puts(attr_t</STRONG> <EM>attrs</EM><STRONG>,</STRONG> <STRONG>short</STRONG> <EM>pair</EM><STRONG>,</STRONG> <STRONG>void</STRONG> <STRONG>*</STRONG><EM>opts</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>(*</STRONG><EM>putc</EM><STRONG>)(char));</STRONG>
+ <STRONG>int</STRONG> <STRONG>vid_puts(attr_t</STRONG> <EM>attrs</EM><STRONG>,</STRONG> <STRONG>short</STRONG> <EM>pair</EM><STRONG>,</STRONG> <STRONG>void</STRONG> <STRONG>*</STRONG><EM>opts</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>(*</STRONG><EM>putc</EM><STRONG>)(int));</STRONG>
<STRONG>int</STRONG> <STRONG>vid_attr(attr_t</STRONG> <EM>attrs</EM><STRONG>,</STRONG> <STRONG>short</STRONG> <EM>pair</EM><STRONG>,</STRONG> <STRONG>void</STRONG> <STRONG>*</STRONG><EM>opts</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>mvcur(int</STRONG> <EM>oldrow</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>oldcol</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>newrow</EM>, int <EM>newcol</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>tigetflag(char</STRONG> <STRONG>*</STRONG><EM>capname</EM><STRONG>);</STRONG>
<STRONG>int</STRONG> <STRONG>tigetnum(char</STRONG> <STRONG>*</STRONG><EM>capname</EM><STRONG>);</STRONG>
<STRONG>char</STRONG> <STRONG>*tigetstr(char</STRONG> <STRONG>*</STRONG><EM>capname</EM><STRONG>);</STRONG>
+ <STRONG>char</STRONG> <STRONG>*tiparm(const</STRONG> <STRONG>char</STRONG> <STRONG>*</STRONG><EM>str</EM><STRONG>,</STRONG> <STRONG>...);</STRONG>
</PRE>
tion keys. For all other functionality, <STRONG>curses</STRONG> routines
are more suitable and their use is recommended.
+ <STRONG>Initialization</STRONG>
Initially, <STRONG>setupterm</STRONG> should be called. Note that <STRONG>se-</STRONG>
<STRONG>tupterm</STRONG> is automatically called by <STRONG>initscr</STRONG> and <STRONG>newterm</STRONG>.
This defines the set of terminal-dependent variables
- [listed in <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>]. The <STRONG>terminfo</STRONG> variables <STRONG>lines</STRONG> and
- <STRONG>columns</STRONG> are initialized by <STRONG>setupterm</STRONG> as follows: If
- <STRONG>use_env(FALSE)</STRONG> has been called, values for <STRONG>lines</STRONG> and
- <STRONG>columns</STRONG> specified in <STRONG>terminfo</STRONG> are used. Otherwise, if the
- environment variables <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> exist, their val-
- ues are used. If these environment variables do not exist
- and the program is running in a window, the current window
- size is used. Otherwise, if the environment variables do
- not exist, the values for <STRONG>lines</STRONG> and <STRONG>columns</STRONG> specified in
- the <STRONG>terminfo</STRONG> database are used.
-
- The header files <STRONG>curses.h</STRONG> and <STRONG>term.h</STRONG> should be included
- (in this order) to get the definitions for these strings,
- numbers, and flags. Parameterized strings should be
- passed through <STRONG>tparm</STRONG> to instantiate them. All <STRONG>terminfo</STRONG>
- strings [including the output of <STRONG>tparm</STRONG>] should be printed
- with <STRONG>tputs</STRONG> or <STRONG>putp</STRONG>. Call the <STRONG>reset_shell_mode</STRONG> to restore
- the tty modes before exiting [see <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>]. Pro-
- grams which use cursor addressing should output <STRONG>en-</STRONG>
- <STRONG>ter_ca_mode</STRONG> upon startup and should output <STRONG>exit_ca_mode</STRONG>
- before exiting. Programs desiring shell escapes should
- call
-
- <STRONG>reset_shell_mode</STRONG> and output <STRONG>exit_ca_mode</STRONG> before the shell
- is called and should output <STRONG>enter_ca_mode</STRONG> and call <STRONG>re-</STRONG>
- <STRONG>set_prog_mode</STRONG> after returning from the shell.
+ [listed in <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>].
+
+ Each initialization routine provides applications with the
+ terminal capabilities either directly (via header defini-
+ tions), or by special functions. The header files <STRONG>curs-</STRONG>
+ <STRONG>es.h</STRONG> and <STRONG>term.h</STRONG> should be included (in this order) to get
+ the definitions for these strings, numbers, and flags.
+
+ The <STRONG>terminfo</STRONG> variables <STRONG>lines</STRONG> and <STRONG>columns</STRONG> are initialized
+ by <STRONG>setupterm</STRONG> as follows:
+
+ <STRONG>o</STRONG> If <STRONG>use_env(FALSE)</STRONG> has been called, values for <STRONG>lines</STRONG>
+ and <STRONG>columns</STRONG> specified in <STRONG>terminfo</STRONG> are used.
+
+ <STRONG>o</STRONG> Otherwise, if the environment variables <STRONG>LINES</STRONG> and <STRONG>COL-</STRONG>
+ <STRONG>UMNS</STRONG> exist, their values are used. If these environ-
+ ment variables do not exist and the program is running
+ in a window, the current window size is used. Other-
+ wise, if the environment variables do not exist, the
+ values for <STRONG>lines</STRONG> and <STRONG>columns</STRONG> specified in the <STRONG>terminfo</STRONG>
+ database are used.
+
+ Parameterized strings should be passed through <STRONG>tparm</STRONG> to
+ instantiate them. All <STRONG>terminfo</STRONG> strings [including the
+ output of <STRONG>tparm</STRONG>] should be printed with <STRONG>tputs</STRONG> or <STRONG>putp</STRONG>.
+ Call <STRONG>reset_shell_mode</STRONG> to restore the tty modes before ex-
+ iting [see <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>].
+
+ Programs which use cursor addressing should
+
+ <STRONG>o</STRONG> output <STRONG>enter_ca_mode</STRONG> upon startup and
+
+ <STRONG>o</STRONG> output <STRONG>exit_ca_mode</STRONG> before exiting.
+
+ Programs which execute shell subprocesses should
+
+ <STRONG>o</STRONG> call <STRONG>reset_shell_mode</STRONG> and output <STRONG>exit_ca_mode</STRONG> before
+ the shell is called and
+
+ <STRONG>o</STRONG> output <STRONG>enter_ca_mode</STRONG> and call <STRONG>reset_prog_mode</STRONG> after
+ returning from the shell.
The <STRONG>setupterm</STRONG> routine reads in the <STRONG>terminfo</STRONG> database, ini-
tializing the <STRONG>terminfo</STRONG> structures, but does not set up the
output virtualization structures used by <STRONG>curses</STRONG>. The ter-
- minal type is the character string <EM>term</EM>; if <EM>term</EM> is null,
- the environment variable <STRONG>TERM</STRONG> is used. All output is to
- file descriptor <STRONG>fildes</STRONG> which is initialized for output.
- If <EM>errret</EM> is not null, then <STRONG>setupterm</STRONG> returns <STRONG>OK</STRONG> or <STRONG>ERR</STRONG>
+ minal type is the character string <EM>term</EM>; if <EM>term</EM> is null,
+ the environment variable <STRONG>TERM</STRONG> is used. All output is to
+ file descriptor <STRONG>fildes</STRONG> which is initialized for output.
+ If <EM>errret</EM> is not null, then <STRONG>setupterm</STRONG> returns <STRONG>OK</STRONG> or <STRONG>ERR</STRONG>
and stores a status value in the integer pointed to by <EM>er-</EM>
- <EM>rret</EM>. A return value of <STRONG>OK</STRONG> combined with status of <STRONG>1</STRONG> in
+ <EM>rret</EM>. A return value of <STRONG>OK</STRONG> combined with status of <STRONG>1</STRONG> in
<EM>errret</EM> is normal. If <STRONG>ERR</STRONG> is returned, examine <EM>errret</EM>:
- <STRONG>1</STRONG> means that the terminal is hardcopy, cannot be
- used for curses applications.
+ <STRONG>1</STRONG> means that the terminal is hardcopy, cannot be used
+ for curses applications.
+
+ <STRONG>setupterm</STRONG> determines if the entry is a hardcopy type
+ by checking the <EM>hc</EM> (<EM>hardcopy</EM>) capability.
+
+ <STRONG>0</STRONG> means that the terminal could not be found, or that
+ it is a generic type, having too little information
+ for curses applications to run.
- <STRONG>0</STRONG> means that the terminal could not be found, or
- that it is a generic type, having too little
- information for curses applications to run.
+ <STRONG>setupterm</STRONG> determines if the entry is a generic type
+ by checking the <EM>gn</EM> (<EM>generic</EM>) capability.
- <STRONG>-1</STRONG> means that the <STRONG>terminfo</STRONG> database could not be
- found.
+ <STRONG>-1</STRONG> means that the <STRONG>terminfo</STRONG> database could not be found.
If <EM>errret</EM> is null, <STRONG>setupterm</STRONG> prints an error message upon
finding an error and exits. Thus, the simplest call is:
which uses all the defaults and sends the output to <STRONG>std-</STRONG>
<STRONG>out</STRONG>.
- The <STRONG>setterm</STRONG> routine is being replaced by <STRONG>setupterm</STRONG>. The
- call:
+ The <STRONG>setterm</STRONG> routine was replaced by <STRONG>setupterm</STRONG>. The call:
<STRONG>setupterm(</STRONG><EM>term</EM><STRONG>,</STRONG> <STRONG>1,</STRONG> <STRONG>(int</STRONG> <STRONG>*)0)</STRONG>
- provides the same functionality as <STRONG>setterm(</STRONG><EM>term</EM><STRONG>)</STRONG>. The
- <STRONG>setterm</STRONG> routine is included here for BSD compatibility,
- and is not recommended for new programs.
-
- The <STRONG>set_curterm</STRONG> routine sets the variable <STRONG>cur_term</STRONG> to
- <EM>nterm</EM>, and makes all of the <STRONG>terminfo</STRONG> boolean, numeric, and
- string variables use the values from <EM>nterm</EM>. It returns
- the old value of <STRONG>cur_term</STRONG>.
+ provides the same functionality as <STRONG>setterm(</STRONG><EM>term</EM><STRONG>)</STRONG>. The
+ <STRONG>setterm</STRONG> routine is provided for BSD compatibility, and is
+ not recommended for new programs.
+
+ <STRONG>The</STRONG> <STRONG>Terminal</STRONG> <STRONG>State</STRONG>
+ The <STRONG>setupterm</STRONG> routine stores its information about the
+ terminal in a <STRONG>TERMINAL</STRONG> structure pointed to by the global
+ variable <STRONG>cur_term</STRONG>. If it detects an error, or decides
+ that the terminal is unsuitable (hardcopy or generic), it
+ discards this information, making it not available to ap-
+ plications.
+
+ If <STRONG>setupterm</STRONG> is called repeatedly for the same terminal
+ type, it will reuse the information. It maintains only
+ one copy of a given terminal's capabilities in memory. If
+ it is called for different terminal types, <STRONG>setupterm</STRONG> allo-
+ cates new storage for each set of terminal capabilities.
+
+ The <STRONG>set_curterm</STRONG> routine sets <STRONG>cur_term</STRONG> to <EM>nterm</EM>, and makes
+ all of the <STRONG>terminfo</STRONG> boolean, numeric, and string variables
+ use the values from <EM>nterm</EM>. It returns the old value of
+ <STRONG>cur_term</STRONG>.
The <STRONG>del_curterm</STRONG> routine frees the space pointed to by
<EM>oterm</EM> and makes it available for further use. If <EM>oterm</EM> is
The <STRONG>restartterm</STRONG> routine is similar to <STRONG>setupterm</STRONG> and
<STRONG>initscr</STRONG>, except that it is called after restoring memory
to a previous state (for example, when reloading a game
- saved as a core image dump). It assumes that the windows
- and the input and output options are the same as when mem-
- ory was saved, but the terminal type and baud rate may be
- different. Accordingly, it saves various tty state bits,
- does a setupterm, and then restores the bits.
-
+ saved as a core image dump). <STRONG>restartterm</STRONG> assumes that the
+ windows and the input and output options are the same as
+ when memory was saved, but the terminal type and baud rate
+ may be different. Accordingly, <STRONG>restartterm</STRONG> saves various
+ tty state bits, calls <STRONG>setupterm</STRONG>, and then restores the
+ bits.
+
+ <STRONG>Formatting</STRONG> <STRONG>Output</STRONG>
The <STRONG>tparm</STRONG> routine instantiates the string <EM>str</EM> with parame-
- ters <EM>pi</EM>. A pointer is returned to the result of <EM>str</EM> with
+ ters <EM>pi</EM>. A pointer is returned to the result of <EM>str</EM> with
the parameters applied.
- The <STRONG>tputs</STRONG> routine applies padding information to the
- string <EM>str</EM> and outputs it. The <EM>str</EM> must be a terminfo
- string variable or the return value from <STRONG>tparm</STRONG>, <STRONG>tgetstr</STRONG>,
+ <STRONG>tiparm</STRONG> is a newer form of <STRONG>tparm</STRONG> which uses <EM><stdarg.h></EM>
+ rather than a fixed-parameter list. Its numeric parame-
+ ters are integers (int) rather than longs.
+
+ <STRONG>Output</STRONG> <STRONG>Functions</STRONG>
+ The <STRONG>tputs</STRONG> routine applies padding information to the
+ string <EM>str</EM> and outputs it. The <EM>str</EM> must be a terminfo
+ string variable or the return value from <STRONG>tparm</STRONG>, <STRONG>tgetstr</STRONG>,
or <STRONG>tgoto</STRONG>. <EM>affcnt</EM> is the number of lines affected, or 1 if
- not applicable. <EM>putc</EM> is a <STRONG>putchar</STRONG>-like routine to which
+ not applicable. <EM>putc</EM> is a <STRONG>putchar</STRONG>-like routine to which
the characters are passed, one at a time.
- The <STRONG>putp</STRONG> routine calls <STRONG>tputs(</STRONG><EM>str</EM><STRONG>,</STRONG> <STRONG>1,</STRONG> <STRONG>putchar)</STRONG>. Note that
- the output of <STRONG>putp</STRONG> always goes to <STRONG>stdout</STRONG>, not to the
+ The <STRONG>putp</STRONG> routine calls <STRONG>tputs(</STRONG><EM>str</EM><STRONG>,</STRONG> <STRONG>1,</STRONG> <STRONG>putchar)</STRONG>. Note that
+ the output of <STRONG>putp</STRONG> always goes to <STRONG>stdout</STRONG>, not to the
<EM>fildes</EM> specified in <STRONG>setupterm</STRONG>.
The <STRONG>vidputs</STRONG> routine displays the string on the terminal in
- the video attribute mode <EM>attrs</EM>, which is any combination
- of the attributes listed in <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>. The characters
+ the video attribute mode <EM>attrs</EM>, which is any combination
+ of the attributes listed in <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>. The characters
are passed to the <STRONG>putchar</STRONG>-like routine <EM>putc</EM>.
- The <STRONG>vidattr</STRONG> routine is like the <STRONG>vidputs</STRONG> routine, except
+ The <STRONG>vidattr</STRONG> routine is like the <STRONG>vidputs</STRONG> routine, except
that it outputs through <STRONG>putchar</STRONG>.
- The <STRONG>vid_attr</STRONG> and <STRONG>vid_puts</STRONG> routines correspond to vidattr
- and vidputs, respectively. They use a set of arguments
- for representing the video attributes plus color, i.e.,
+ The <STRONG>vid_attr</STRONG> and <STRONG>vid_puts</STRONG> routines correspond to vidattr
+ and vidputs, respectively. They use a set of arguments
+ for representing the video attributes plus color, i.e.,
one of type attr_t for the attributes and one of short for
the color_pair number. The <STRONG>vid_attr</STRONG> and <STRONG>vid_puts</STRONG> routines
- are designed to use the attribute constants with the <EM>WA</EM><STRONG>_</STRONG>
- prefix. The opts argument is reserved for future use.
- Currently, applications must provide a null pointer for
+ are designed to use the attribute constants with the <EM>WA</EM><STRONG>_</STRONG>
+ prefix. The opts argument is reserved for future use.
+ Currently, applications must provide a null pointer for
that argument.
- The <STRONG>mvcur</STRONG> routine provides low-level cursor motion. It
- takes effect immediately (rather than at the next re-
+ The <STRONG>mvcur</STRONG> routine provides low-level cursor motion. It
+ takes effect immediately (rather than at the next re-
fresh).
- The <STRONG>tigetflag</STRONG>, <STRONG>tigetnum</STRONG> and <STRONG>tigetstr</STRONG> routines return the
+ <STRONG>Terminal</STRONG> <STRONG>Capability</STRONG> <STRONG>Functions</STRONG>
+ The <STRONG>tigetflag</STRONG>, <STRONG>tigetnum</STRONG> and <STRONG>tigetstr</STRONG> routines return the
value of the capability corresponding to the <STRONG>terminfo</STRONG> <EM>cap-</EM>
- <EM>name</EM> passed to them, such as <STRONG>xenl</STRONG>.
+ <EM>name</EM> passed to them, such as <STRONG>xenl</STRONG>. The <EM>capname</EM> for each
+ capability is given in the table column entitled <EM>capname</EM>
+ code in the capabilities section of <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>.
+
+ These routines return special values to denote errors.
+
+ The <STRONG>tigetflag</STRONG> routine returns
+
+ <STRONG>-1</STRONG> if <EM>capname</EM> is not a boolean capability, or
+
+ <STRONG>0</STRONG> if it is canceled or absent from the terminal de-
+ scription.
- The <STRONG>tigetflag</STRONG> routine returns the value <STRONG>-1</STRONG> if <EM>capname</EM> is
- not a boolean capability, or <STRONG>0</STRONG> if it is canceled or absent
- from the terminal description.
+ The <STRONG>tigetnum</STRONG> routine returns
- The <STRONG>tigetnum</STRONG> routine returns the value <STRONG>-2</STRONG> if <EM>capname</EM> is
- not a numeric capability, or <STRONG>-1</STRONG> if it is canceled or ab-
- sent from the terminal description.
+ <STRONG>-2</STRONG> if <EM>capname</EM> is not a numeric capability, or
- The <STRONG>tigetstr</STRONG> routine returns the value <STRONG>(char</STRONG> <STRONG>*)-1</STRONG> if <EM>cap-</EM>
- <EM>name</EM> is not a string capability, or <STRONG>0</STRONG> if it is canceled or
- absent from the terminal description.
+ <STRONG>-1</STRONG> if it is canceled or absent from the terminal de-
+ scription.
- The <EM>capname</EM> for each capability is given in the table col-
- umn entitled <EM>capname</EM> code in the capabilities section of
- <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>.
+ The <STRONG>tigetstr</STRONG> routine returns
+ <STRONG>(char</STRONG> <STRONG>*)-1</STRONG>
+ if <EM>capname</EM> is not a string capability, or
+
+ <STRONG>0</STRONG> if it is canceled or absent from the terminal de-
+ scription.
+
+ <STRONG>Terminal</STRONG> <STRONG>Capability</STRONG> <STRONG>Names</STRONG>
+ These null-terminated arrays contain the short terminfo
+ names ("codes"), the <STRONG>termcap</STRONG> names, and the long terminfo
+ names ("fnames") for each of the predefined <STRONG>terminfo</STRONG> vari-
+ ables:
<STRONG>char</STRONG> <STRONG>*boolnames[]</STRONG>, <STRONG>*boolcodes[]</STRONG>, <STRONG>*boolfnames[]</STRONG>
<STRONG>char</STRONG> <STRONG>*numnames[]</STRONG>, <STRONG>*numcodes[]</STRONG>, <STRONG>*numfnames[]</STRONG>
<STRONG>char</STRONG> <STRONG>*strnames[]</STRONG>, <STRONG>*strcodes[]</STRONG>, <STRONG>*strfnames[]</STRONG>
- These null-terminated arrays contain the <EM>capnames</EM>, the
- <STRONG>termcap</STRONG> codes, and the full C names, for each of the <STRONG>ter-</STRONG>
- <STRONG>minfo</STRONG> variables.
-
</PRE>
<H2>RETURN VALUE</H2><PRE>
- Routines that return an integer return <STRONG>ERR</STRONG> upon failure
- and <STRONG>OK</STRONG> (SVr4 only specifies "an integer value other than
- <STRONG>ERR</STRONG>") upon successful completion, unless otherwise noted
+ Routines that return an integer return <STRONG>ERR</STRONG> upon failure
+ and <STRONG>OK</STRONG> (SVr4 only specifies "an integer value other than
+ <STRONG>ERR</STRONG>") upon successful completion, unless otherwise noted
in the preceding routine descriptions.
Routines that return pointers always return <STRONG>NULL</STRONG> on error.
X/Open defines no error conditions. In this implementa-
tion
- <STRONG>del_curterm</STRONG>
- returns an error if its terminal parameter is
- null.
+ <STRONG>del_curterm</STRONG>
+ returns an error if its terminal parameter is
+ null.
- <STRONG>restartterm</STRONG>
- returns an error if the associated call to <STRONG>se-</STRONG>
- <STRONG>tupterm</STRONG> returns an error.
+ <STRONG>putp</STRONG> calls <STRONG>tputs</STRONG>, returning the same error-codes.
- <STRONG>setupterm</STRONG>
- returns an error if it cannot allocate enough
- memory, or create the initial windows (stdscr,
- curscr, newscr). Other error conditions are
- documented above.
+ <STRONG>restartterm</STRONG>
+ returns an error if the associated call to <STRONG>se-</STRONG>
+ <STRONG>tupterm</STRONG> returns an error.
+ <STRONG>setupterm</STRONG>
+ returns an error if it cannot allocate enough
+ memory, or create the initial windows (stdscr,
+ curscr, newscr). Other error conditions are
+ documented above.
-</PRE>
-<H2>NOTES</H2><PRE>
- The <STRONG>setupterm</STRONG> routine should be used in place of <STRONG>setterm</STRONG>.
- It may be useful when you want to test for terminal capa-
- bilities without committing to the allocation of storage
- involved in <STRONG>initscr</STRONG>.
-
- Note that <STRONG>vidattr</STRONG> and <STRONG>vidputs</STRONG> may be macros.
+ <STRONG>tputs</STRONG>
+ returns an error if the string parameter is
+ null. It does not detect I/O errors: X/Open
+ states that <STRONG>tputs</STRONG> ignores the return value of
+ the output function <EM>putc</EM>.
</PRE>
<H2>PORTABILITY</H2><PRE>
- The function <STRONG>setterm</STRONG> is not described in the XSI Curses
- standard and must be considered non-portable. All other
- functions are as described in the XSI curses standard.
-
- In System V Release 4, <STRONG>set_curterm</STRONG> has an <STRONG>int</STRONG> return type
- and returns <STRONG>OK</STRONG> or <STRONG>ERR</STRONG>. We have chosen to implement the
- XSI Curses semantics.
+ X/Open notes that <STRONG>vidattr</STRONG> and <STRONG>vidputs</STRONG> may be macros.
+
+ The function <STRONG>setterm</STRONG> is not described by X/Open and must
+ be considered non-portable. All other functions are as
+ described by X/Open.
+
+ <STRONG>setupterm</STRONG> copies the terminal name to the array <STRONG>ttytype</STRONG>.
+ This is not part of X/Open Curses, but is assumed by some
+ applications.
+
+ If configured to use the terminal-driver, e.g., for the
+ MinGW port,
+
+ <STRONG>o</STRONG> <STRONG>setupterm</STRONG> interprets a missing/empty TERM variable as
+ the special value "unknown".
+
+ <STRONG>o</STRONG> <STRONG>setupterm</STRONG> allows explicit use of the the windows con-
+ sole driver by checking if $TERM is set to "#win32con"
+ or an abbreviation of that string.
+
+ Older versions of <STRONG>ncurses</STRONG> assumed that the file descriptor
+ passed to <STRONG>setupterm</STRONG> from <STRONG>initscr</STRONG> or <STRONG>newterm</STRONG> uses buffered
+ I/O, and would write to the corresponding stream. In ad-
+ dition to the limitation that the terminal was left in
+ block-buffered mode on exit (like SystemV curses), it was
+ problematic because <STRONG>ncurses</STRONG> did not allow a reliable way
+ to cleanup on receiving SIGTSTP. The current version uses
+ output buffers managed directly by <STRONG>ncurses</STRONG>. Some of the
+ low-level functions described in this manual page write to
+ the standard output. They are not signal-safe. The high-
+ level functions in <STRONG>ncurses</STRONG> use alternate versions of these
+ functions using the more reliable buffering scheme.
+
+ In System V Release 4, <STRONG>set_curterm</STRONG> has an <STRONG>int</STRONG> return type
+ and returns <STRONG>OK</STRONG> or <STRONG>ERR</STRONG>. We have chosen to implement the
+ X/Open Curses semantics.
In System V Release 4, the third argument of <STRONG>tputs</STRONG> has the
type <STRONG>int</STRONG> <STRONG>(*putc)(char)</STRONG>.
- The XSI Curses standard prototypes <STRONG>tparm</STRONG> with a fixed num-
- ber of parameters, rather than a variable argument list.
- This implementation uses a variable argument list.
- Portable applications should provide 9 parameters after
- the format; zeroes are fine for this purpose.
-
- XSI notes that after calling <STRONG>mvcur</STRONG>, the curses state may
- not match the actual terminal state, and that an applica-
- tion should touch and refresh the window before resuming
- normal curses calls. Both ncurses and System V Release 4
- curses implement <STRONG>mvcur</STRONG> using the SCREEN data allocated in
- either <STRONG>initscr</STRONG> or <STRONG>newterm</STRONG>. So though it is documented as
- a terminfo function, <STRONG>mvcur</STRONG> is really a curses function
- which is not well specified.
-
- XSI states that the old location must be given. This im-
- plementation allows the caller to use -1's for the old or-
- dinates. In that case, the old location is unknown.
+ At least one implementation of X/Open Curses (Solaris) re-
+ turns a value other than OK/ERR from <STRONG>tputs</STRONG>. That returns
+ the length of the string, and does no error-checking.
+
+ X/Open Curses prototypes <STRONG>tparm</STRONG> with a fixed number of pa-
+ rameters, rather than a variable argument list. This im-
+ plementation uses a variable argument list, but can be
+ configured to use the fixed-parameter list. Portable ap-
+ plications should provide 9 parameters after the format;
+ zeroes are fine for this purpose.
+
+ In response to comments by Thomas E. Dickey, X/Open Curses
+ Issue 7 proposed the <STRONG>tiparm</STRONG> function in mid-2009.
+
+ X/Open notes that after calling <STRONG>mvcur</STRONG>, the curses state
+ may not match the actual terminal state, and that an ap-
+ plication should touch and refresh the window before re-
+ suming normal curses calls. Both <STRONG>ncurses</STRONG> and System V Re-
+ lease 4 curses implement <STRONG>mvcur</STRONG> using the SCREEN data allo-
+ cated in either <STRONG>initscr</STRONG> or <STRONG>newterm</STRONG>. So though it is docu-
+ mented as a terminfo function, <STRONG>mvcur</STRONG> is really a curses
+ function which is not well specified.
+
+ X/Open states that the old location must be given for
+ <STRONG>mvcur</STRONG>. This implementation allows the caller to use -1's
+ for the old ordinates. In that case, the old location is
+ unknown.
+
+ Other implementions may not declare the capability name
+ arrays. Some provide them without declaring them. X/Open
+ does not specify them.
Extended terminal capability names, e.g., as defined by
- <STRONG>tic</STRONG> <STRONG>-x</STRONG>, are not stored in the arrays described in this
- section.
+ <STRONG>tic</STRONG> <STRONG>-x</STRONG>, are not stored in the arrays described here.
</PRE>
<H2>SEE ALSO</H2><PRE>
- <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>, <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>, <STRONG>curs_term-</STRONG>
- <STRONG><A HREF="curs_termcap.3x.html">cap(3x)</A></STRONG>, <STRONG><A HREF="putc.3.html">putc(3)</A></STRONG>, <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
+ <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>, <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>, <STRONG>curs_term-</STRONG>
+ <STRONG><A HREF="curs_termcap.3x.html">cap(3x)</A></STRONG>, <STRONG><A HREF="curs_variables.3x.html">curs_variables(3x)</A></STRONG>, <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>, <STRONG>putc(3)</STRONG>,
+ <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
<STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
</PRE>
<HR>
-<ADDRESS>
-Man(1) output converted with
-<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>
-</ADDRESS>
+Man(1) output converted with <a href="http://invisible-island.net/scripts/readme.html#others_scripts">man2html</a>
</BODY>
</HTML>