<!--
* t
* DO NOT EDIT THIS FILE BY HAND!
- * It is generated from terminfo.head, Caps, and terminfo.tail.
+ * It is generated from terminfo.head, ./../include/Caps ./../include/Caps-ncurses, and terminfo.tail.
* Note: this must be run through tbl before nroff.
* The magic cookie on the first line triggers this under some man programs.
****************************************************************************
- * Copyright (c) 1998-2016,2017 Free Software Foundation, Inc. *
+ * Copyright 2018-2019,2020 Thomas E. Dickey *
+ * Copyright 1998-2016,2017 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: terminfo.head,v 1.32 2017/04/22 13:52:49 tom Exp @
+ * @Id: terminfo.head,v 1.39 2020/02/02 23:34:34 tom Exp @
* Head of terminfo man page ends here
- * @Id: terminfo.tail,v 1.88 2017/08/12 22:26:02 tom Exp @
- * Beginning of terminfo.tail file
- * This file is part of ncurses.
- * See "terminfo.head" for copyright.
+ ****************************************************************************
+ * Copyright 2018-2019,2020 Thomas E. Dickey *
+ * Copyright 1998-2016,2017 Free Software Foundation, Inc. *
+ * *
+ * Permission is hereby granted, free of charge, to any person obtaining a *
+ * copy of this software and associated documentation files (the *
+ * "Software"), to deal in the Software without restriction, including *
+ * without limitation the rights to use, copy, modify, merge, publish, *
+ * distribute, distribute with modifications, sublicense, and/or sell *
+ * copies of the Software, and to permit persons to whom the Software is *
+ * furnished to do so, subject to the following conditions: *
+ * *
+ * The above copyright notice and this permission notice shall be included *
+ * in all copies or substantial portions of the Software. *
+ * *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS *
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF *
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. *
+ * IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, *
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR *
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR *
+ * THE USE OR OTHER DEALINGS IN THE SOFTWARE. *
+ * *
+ * Except as contained in this notice, the name(s) of the above copyright *
+ * holders shall not be used in advertising or otherwise to promote the *
+ * sale, use or other dealings in this Software without prior written *
+ * authorization. *
+ ****************************************************************************
+ * @Id: terminfo.tail,v 1.99 2020/02/02 23:34:34 tom Exp @
*.in -2
*.in +2
*.in -2
<HTML>
<HEAD>
<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
-<meta name="generator" content="Manpage converted by man2html - see http://invisible-island.net/scripts/readme.html#others_scripts">
+<meta name="generator" content="Manpage converted by man2html - see https://invisible-island.net/scripts/readme.html#others_scripts">
<TITLE>terminfo 5 File Formats</TITLE>
-<link rev=made href="mailto:bug-ncurses@gnu.org">
+<link rel="author" href="mailto:bug-ncurses@gnu.org">
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</HEAD>
<BODY>
</PRE><H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
<EM>Terminfo</EM> is a data base describing terminals, used by screen-oriented
- programs such as <STRONG>nvi(1)</STRONG>, <STRONG>rogue(1)</STRONG> and libraries such as <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>.
+ programs such as <STRONG>nvi(1)</STRONG>, <STRONG>lynx(1)</STRONG>, <STRONG>mutt(1)</STRONG>, and other curses applica-
+ tions, using high-level calls to libraries such as <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>. It is
+ also used via low-level calls by non-curses applications which may be
+ screen-oriented (such as <STRONG><A HREF="clear.1.html">clear(1)</A></STRONG>) or non-screen (such as <STRONG><A HREF="tabs.1.html">tabs(1)</A></STRONG>).
+
<EM>Terminfo</EM> describes terminals by giving a set of capabilities which they
have, by specifying how to perform screen operations, and by specifying
- padding requirements and initialization sequences. This describes
- <STRONG>ncurses</STRONG> version 6.0 (patch 20171028).
+ padding requirements and initialization sequences.
+
+ This manual describes <STRONG>ncurses</STRONG> version 6.2 (patch 20200215).
</PRE><H3><a name="h3-Terminfo-Entry-Syntax">Terminfo Entry Syntax</a></H3><PRE>
Entries in <EM>terminfo</EM> consist of a sequence of fields:
- <STRONG>o</STRONG> Each field ends with a comma "," (embedded commas may be escaped
+ <STRONG>o</STRONG> Each field ends with a comma "," (embedded commas may be escaped
with a backslash or written as "\054").
<STRONG>o</STRONG> White space between fields is ignored.
<STRONG>o</STRONG> The first field in a <EM>terminfo</EM> entry begins in the first column.
- <STRONG>o</STRONG> Newlines and leading whitespace (spaces or tabs) may be used for
- formatting entries for readability. These are removed from parsed
+ <STRONG>o</STRONG> Newlines and leading whitespace (spaces or tabs) may be used for
+ formatting entries for readability. These are removed from parsed
entries.
- The <STRONG>infocmp</STRONG> <STRONG>-f</STRONG> and <STRONG>-W</STRONG> options rely on this to format if-then-else
- expressions, or to enforce maximum line-width. The resulting for-
+ The <STRONG>infocmp</STRONG> <STRONG>-f</STRONG> and <STRONG>-W</STRONG> options rely on this to format if-then-else
+ expressions, or to enforce maximum line-width. The resulting for-
matted terminal description can be read by <STRONG>tic</STRONG>.
- <STRONG>o</STRONG> The first field for each terminal gives the names which are known
+ <STRONG>o</STRONG> The first field for each terminal gives the names which are known
for the terminal, separated by "|" characters.
The first name given is the most common abbreviation for the termi-
- nal (its primary name), the last name given should be a long name
- fully identifying the terminal (see <STRONG><A HREF="curs_termattrs.3x.html">longname(3x)</A></STRONG>), and all others
+ nal (its primary name), the last name given should be a long name
+ fully identifying the terminal (see <STRONG><A HREF="curs_termattrs.3x.html">longname(3x)</A></STRONG>), and all others
are treated as synonyms (aliases) for the primary terminal name.
- X/Open Curses advises that all names but the last should be in
- lower case and contain no blanks; the last name may well contain
+ X/Open Curses advises that all names but the last should be in
+ lower case and contain no blanks; the last name may well contain
upper case and blanks for readability.
- This implementation is not so strict; it allows mixed case in the
+ This implementation is not so strict; it allows mixed case in the
primary name and aliases. If the last name has no embedded blanks,
- it allows that to be both an alias and a verbose name (but will
+ it allows that to be both an alias and a verbose name (but will
warn about this ambiguity).
- <STRONG>o</STRONG> Lines beginning with a "#" in the first column are treated as com-
+ <STRONG>o</STRONG> Lines beginning with a "#" in the first column are treated as com-
ments.
While comment lines are legal at any point, the output of <STRONG>captoinfo</STRONG>
- and <STRONG>infotocap</STRONG> (aliases for <STRONG>tic</STRONG>) will move comments so they occur
+ and <STRONG>infotocap</STRONG> (aliases for <STRONG>tic</STRONG>) will move comments so they occur
only between entries.
- Terminal names (except for the last, verbose entry) should be chosen
+ Terminal names (except for the last, verbose entry) should be chosen
using the following conventions. The particular piece of hardware mak-
- ing up the terminal should have a root name, thus "hp2621". This name
+ ing up the terminal should have a root name, thus "hp2621". This name
should not contain hyphens. Modes that the hardware can be in, or user
- preferences, should be indicated by appending a hyphen and a mode suf-
- fix. Thus, a vt100 in 132 column mode would be vt100-w. The following
+ preferences, should be indicated by appending a hyphen and a mode suf-
+ fix. Thus, a vt100 in 132-column mode would be vt100-w. The following
suffixes should be used where possible:
<STRONG>Suffix</STRONG> <STRONG>Meaning</STRONG> <STRONG>Example</STRONG>
-vb Use visible bell instead of beep wy370-vb
-w Wide mode (> 80 columns, usually 132) vt100-w
- For more on terminal naming conventions, see the <STRONG>term(7)</STRONG> manual page.
+ For more on terminal naming conventions, see the <STRONG><A HREF="term.7.html">term(7)</A></STRONG> manual page.
</PRE><H3><a name="h3-Terminfo-Capabilities-Syntax">Terminfo Capabilities Syntax</a></H3><PRE>
- The terminfo entry consists of several <EM>capabilities</EM>, i.e., features
- that the terminal has, or methods for exercising the terminal's fea-
+ The terminfo entry consists of several <EM>capabilities</EM>, i.e., features
+ that the terminal has, or methods for exercising the terminal's fea-
tures.
After the first field (giving the name(s) of the terminal entry), there
should be one or more <EM>capability</EM> fields. These are boolean, numeric or
string names with corresponding values:
- <STRONG>o</STRONG> Boolean capabilities are true when present, false when absent.
+ <STRONG>o</STRONG> Boolean capabilities are true when present, false when absent.
There is no explicit value for boolean capabilities.
- <STRONG>o</STRONG> Numeric capabilities have a "#" following the name, then an
+ <STRONG>o</STRONG> Numeric capabilities have a "#" following the name, then an
unsigned decimal integer value.
- <STRONG>o</STRONG> String capabilities have a "=" following the name, then an string
+ <STRONG>o</STRONG> String capabilities have a "=" following the name, then an string
of characters making up the capability value.
- String capabilities can be split into multiple lines, just as the
- fields comprising a terminal entry can be split into multiple
- lines. While blanks between fields are ignored, blanks embedded
- within a string value are retained, except for leading blanks on a
+ String capabilities can be split into multiple lines, just as the
+ fields comprising a terminal entry can be split into multiple
+ lines. While blanks between fields are ignored, blanks embedded
+ within a string value are retained, except for leading blanks on a
line.
- Any capability can be <EM>canceled</EM>, i.e., suppressed from the terminal
+ Any capability can be <EM>canceled</EM>, i.e., suppressed from the terminal
entry, by following its name with "@" rather than a capability value.
</PRE><H3><a name="h3-Similar-Terminals">Similar Terminals</a></H3><PRE>
- If there are two very similar terminals, one (the variant) can be
- defined as being just like the other (the base) with certain excep-
+ If there are two very similar terminals, one (the variant) can be
+ defined as being just like the other (the base) with certain excep-
tions. In the definition of the variant, the string capability <STRONG>use</STRONG> can
be given with the name of the base terminal:
- <STRONG>o</STRONG> The capabilities given before <STRONG>use</STRONG> override those in the base type
+ <STRONG>o</STRONG> The capabilities given before <STRONG>use</STRONG> override those in the base type
named by <STRONG>use</STRONG>.
- <STRONG>o</STRONG> If there are multiple <STRONG>use</STRONG> capabilities, they are merged in reverse
- order. That is, the rightmost <STRONG>use</STRONG> reference is processed first,
+ <STRONG>o</STRONG> If there are multiple <STRONG>use</STRONG> capabilities, they are merged in reverse
+ order. That is, the rightmost <STRONG>use</STRONG> reference is processed first,
then the one to its left, and so forth.
- <STRONG>o</STRONG> Capabilities given explicitly in the entry override those brought
+ <STRONG>o</STRONG> Capabilities given explicitly in the entry override those brought
in by <STRONG>use</STRONG> references.
A capability can be canceled by placing <STRONG>xx@</STRONG> to the left of the use ref-
- erence that imports it, where <EM>xx</EM> is the capability. For example, the
+ erence that imports it, where <EM>xx</EM> is the capability. For example, the
entry
2621-nl, smkx@, rmkx@, use=2621,
defines a 2621-nl that does not have the <STRONG>smkx</STRONG> or <STRONG>rmkx</STRONG> capabilities, and
- hence does not turn on the function key labels when in visual mode.
- This is useful for different modes for a terminal, or for different
+ hence does not turn on the function key labels when in visual mode.
+ This is useful for different modes for a terminal, or for different
user preferences.
An entry included via <STRONG>use</STRONG> can contain canceled capabilities, which have
- the same effect as if those cancels were inline in the using terminal
+ the same effect as if those cancels were inline in the using terminal
entry.
</PRE><H3><a name="h3-Predefined-Capabilities">Predefined Capabilities</a></H3><PRE>
- The following is a complete table of the capabilities included in a
- terminfo description block and available to terminfo-using code. In
+ The following is a complete table of the capabilities included in a
+ terminfo description block and available to terminfo-using code. In
each line of the table,
- The <STRONG>variable</STRONG> is the name by which the programmer (at the terminfo
+ The <STRONG>variable</STRONG> is the name by which the programmer (at the terminfo
level) accesses the capability.
- The <STRONG>capname</STRONG> is the short name used in the text of the database, and is
- used by a person updating the database. Whenever possible, capnames
+ The <STRONG>capname</STRONG> is the short name used in the text of the database, and is
+ used by a person updating the database. Whenever possible, capnames
are chosen to be the same as or similar to the ANSI X3.64-1979 standard
- (now superseded by ECMA-48, which uses identical or very similar
- names). Semantics are also intended to match those of the specifica-
+ (now superseded by ECMA-48, which uses identical or very similar
+ names). Semantics are also intended to match those of the specifica-
tion.
- The termcap code is the old <STRONG>termcap</STRONG> capability name (some capabilities
+ The termcap code is the old <STRONG>termcap</STRONG> capability name (some capabilities
are new, and have names which termcap did not originate).
- Capability names have no hard length limit, but an informal limit of 5
+ Capability names have no hard length limit, but an informal limit of 5
characters has been adopted to keep them short and to allow the tabs in
the source file <STRONG>Caps</STRONG> to line up nicely.
- Finally, the description field attempts to convey the semantics of the
+ Finally, the description field attempts to convey the semantics of the
capability. You may find some codes in the description field:
(P) indicates that padding may be specified
- #[1-9] in the description field indicates that the string is passed
+ #[1-9] in the description field indicates that the string is passed
through tparm with parms as given (#<EM>i</EM>).
- (P*) indicates that padding may vary in proportion to the number of
+ (P*) indicates that padding may vary in proportion to the number of
lines affected
(#<EM>i</EM>) indicates the <EM>i</EM>th parameter.
These are the boolean capabilities:
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Booleans</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- auto_left_margin bw bw cub1 wraps from col-
- umn 0 to last column
- auto_right_margin am am terminal has auto-
- matic margins
- back_color_erase bce ut screen erased with
- background color
- can_change ccc cc terminal can re-
- define existing col-
- ors
- ceol_standout_glitch xhp xs standout not erased
- by overwriting (hp)
- col_addr_glitch xhpa YA only positive motion
- for hpa/mhpa caps
-
- cpi_changes_res cpix YF changing character
- pitch changes reso-
- lution
- cr_cancels_micro_mode crxm YB using cr turns off
- micro mode
- dest_tabs_magic_smso xt xt tabs destructive,
- magic so char
- (t1061)
- eat_newline_glitch xenl xn newline ignored
- after 80 cols (con-
- cept)
- erase_overstrike eo eo can erase over-
- strikes with a blank
- generic_type gn gn generic line type
- hard_copy hc hc hardcopy terminal
- hard_cursor chts HC cursor is hard to
- see
- has_meta_key km km Has a meta key
- (i.e., sets 8th-bit)
- has_print_wheel daisy YC printer needs opera-
- tor to change char-
- acter set
- has_status_line hs hs has extra status
- line
- hue_lightness_saturation hls hl terminal uses only
- HLS color notation
- (Tektronix)
- insert_null_glitch in in insert mode distin-
- guishes nulls
- lpi_changes_res lpix YG changing line pitch
- changes resolution
- memory_above da da display may be
- retained above the
- screen
- memory_below db db display may be
- retained below the
- screen
- move_insert_mode mir mi safe to move while
- in insert mode
- move_standout_mode msgr ms safe to move while
- in standout mode
- needs_xon_xoff nxon nx padding will not
- work, xon/xoff
- required
- no_esc_ctlc xsb xb beehive (f1=escape,
- f2=ctrl C)
- no_pad_char npc NP pad character does
- not exist
- non_dest_scroll_region ndscr ND scrolling region is
- non-destructive
- non_rev_rmcup nrrmc NR smcup does not
- reverse rmcup
- over_strike os os terminal can over-
- strike
- prtr_silent mc5i 5i printer will not
- echo on screen
- row_addr_glitch xvpa YD only positive motion
- for vpa/mvpa caps
- semi_auto_right_margin sam YE printing in last
- column causes cr
- status_line_esc_ok eslok es escape can be used
- on the status line
- tilde_glitch hz hz cannot print ~'s
- (Hazeltine)
-
-
- transparent_underline ul ul underline character
- overstrikes
- xon_xoff xon xo terminal uses
- xon/xoff handshaking
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Booleans</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ auto_left_margin bw bw cub1 wraps from col-
+ umn 0 to last column
+ auto_right_margin am am terminal has auto-
+ matic margins
+ back_color_erase bce ut screen erased with
+ background color
+
+
+
+ can_change ccc cc terminal can re-
+ define existing col-
+ ors
+ ceol_standout_glitch xhp xs standout not erased
+ by overwriting (hp)
+ col_addr_glitch xhpa YA only positive motion
+ for hpa/mhpa caps
+ cpi_changes_res cpix YF changing character
+ pitch changes reso-
+ lution
+ cr_cancels_micro_mode crxm YB using cr turns off
+ micro mode
+ dest_tabs_magic_smso xt xt tabs destructive,
+ magic so char
+ (t1061)
+ eat_newline_glitch xenl xn newline ignored
+ after 80 cols (con-
+ cept)
+ erase_overstrike eo eo can erase over-
+ strikes with a blank
+ generic_type gn gn generic line type
+ hard_copy hc hc hardcopy terminal
+ hard_cursor chts HC cursor is hard to
+ see
+ has_meta_key km km Has a meta key
+ (i.e., sets 8th-bit)
+ has_print_wheel daisy YC printer needs opera-
+ tor to change char-
+ acter set
+ has_status_line hs hs has extra status
+ line
+ hue_lightness_saturation hls hl terminal uses only
+ HLS color notation
+ (Tektronix)
+ insert_null_glitch in in insert mode distin-
+ guishes nulls
+ lpi_changes_res lpix YG changing line pitch
+ changes resolution
+ memory_above da da display may be
+ retained above the
+ screen
+ memory_below db db display may be
+ retained below the
+ screen
+ move_insert_mode mir mi safe to move while
+ in insert mode
+ move_standout_mode msgr ms safe to move while
+ in standout mode
+ needs_xon_xoff nxon nx padding will not
+ work, xon/xoff
+ required
+ no_esc_ctlc xsb xb beehive (f1=escape,
+ f2=ctrl C)
+ no_pad_char npc NP pad character does
+ not exist
+ non_dest_scroll_region ndscr ND scrolling region is
+ non-destructive
+ non_rev_rmcup nrrmc NR smcup does not
+ reverse rmcup
+ over_strike os os terminal can over-
+ strike
+ prtr_silent mc5i 5i printer will not
+ echo on screen
+ row_addr_glitch xvpa YD only positive motion
+ for vpa/mvpa caps
+
+ semi_auto_right_margin sam YE printing in last
+ column causes cr
+ status_line_esc_ok eslok es escape can be used
+ on the status line
+ tilde_glitch hz hz cannot print ~'s
+ (Hazeltine)
+ transparent_underline ul ul underline character
+ overstrikes
+ xon_xoff xon xo terminal uses
+ xon/xoff handshaking
These are the numeric capabilities:
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- columns cols co number of columns in
- a line
- init_tabs it it tabs initially every
- # spaces
- label_height lh lh rows in each label
- label_width lw lw columns in each
- label
- lines lines li number of lines on
- screen or page
- lines_of_memory lm lm lines of memory if >
- line. 0 means varies
- magic_cookie_glitch xmc sg number of blank
- characters left by
- smso or rmso
- max_attributes ma ma maximum combined
- attributes terminal
- can handle
- max_colors colors Co maximum number of
- colors on screen
- max_pairs pairs pa maximum number of
- color-pairs on the
- screen
- maximum_windows wnum MW maximum number of
- definable windows
- no_color_video ncv NC video attributes
- that cannot be used
- with colors
- num_labels nlab Nl number of labels on
- screen
- padding_baud_rate pb pb lowest baud rate
- where padding needed
- virtual_terminal vt vt virtual terminal
- number (CB/unix)
- width_status_line wsl ws number of columns in
- status line
-
- The following numeric capabilities are present in the SVr4.0 term
- structure, but are not yet documented in the man page. They came in
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ columns cols co number of columns in
+ a line
+ init_tabs it it tabs initially every
+ # spaces
+ label_height lh lh rows in each label
+ label_width lw lw columns in each
+ label
+ lines lines li number of lines on
+ screen or page
+ lines_of_memory lm lm lines of memory if >
+ line. 0 means varies
+ magic_cookie_glitch xmc sg number of blank
+ characters left by
+ smso or rmso
+ max_attributes ma ma maximum combined
+ attributes terminal
+ can handle
+ max_colors colors Co maximum number of
+ colors on screen
+ max_pairs pairs pa maximum number of
+ color-pairs on the
+ screen
+ maximum_windows wnum MW maximum number of
+ definable windows
+ no_color_video ncv NC video attributes
+ that cannot be used
+ with colors
+ num_labels nlab Nl number of labels on
+ screen
+ padding_baud_rate pb pb lowest baud rate
+ where padding needed
+ virtual_terminal vt vt virtual terminal
+ number (CB/unix)
+ width_status_line wsl ws number of columns in
+ status line
+
+ The following numeric capabilities are present in the SVr4.0 term
+ structure, but are not yet documented in the man page. They came in
with SVr4's printer support.
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- bit_image_entwining bitwin Yo number of passes for
- each bit-image row
- bit_image_type bitype Yp type of bit-image
- device
- buffer_capacity bufsz Ya numbers of bytes
- buffered before
- printing
- buttons btns BT number of buttons on
- mouse
- dot_horz_spacing spinh Yc spacing of dots hor-
- izontally in dots
- per inch
-
- dot_vert_spacing spinv Yb spacing of pins ver-
- tically in pins per
- inch
- max_micro_address maddr Yd maximum value in
- micro_..._address
- max_micro_jump mjump Ye maximum value in
- parm_..._micro
- micro_col_size mcs Yf character step size
- when in micro mode
- micro_line_size mls Yg line step size when
- in micro mode
- number_of_pins npins Yh numbers of pins in
- print-head
- output_res_char orc Yi horizontal resolu-
- tion in units per
- line
- output_res_horz_inch orhi Yk horizontal resolu-
- tion in units per
- inch
- output_res_line orl Yj vertical resolution
- in units per line
- output_res_vert_inch orvi Yl vertical resolution
- in units per inch
- print_rate cps Ym print rate in char-
- acters per second
- wide_char_size widcs Yn character step size
- when in double wide
- mode
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ bit_image_entwining bitwin Yo number of passes for
+ each bit-image row
+ bit_image_type bitype Yp type of bit-image
+ device
+
+
+
+ buffer_capacity bufsz Ya numbers of bytes
+ buffered before
+ printing
+ buttons btns BT number of buttons on
+ mouse
+ dot_horz_spacing spinh Yc spacing of dots hor-
+ izontally in dots
+ per inch
+ dot_vert_spacing spinv Yb spacing of pins ver-
+ tically in pins per
+ inch
+ max_micro_address maddr Yd maximum value in
+ micro_..._address
+ max_micro_jump mjump Ye maximum value in
+ parm_..._micro
+ micro_col_size mcs Yf character step size
+ when in micro mode
+ micro_line_size mls Yg line step size when
+ in micro mode
+ number_of_pins npins Yh numbers of pins in
+ print-head
+ output_res_char orc Yi horizontal resolu-
+ tion in units per
+ line
+ output_res_horz_inch orhi Yk horizontal resolu-
+ tion in units per
+ inch
+ output_res_line orl Yj vertical resolution
+ in units per line
+ output_res_vert_inch orvi Yl vertical resolution
+ in units per inch
+ print_rate cps Ym print rate in char-
+ acters per second
+ wide_char_size widcs Yn character step size
+ when in double wide
+ mode
These are the string capabilities:
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- acs_chars acsc ac graphics charset
- pairs, based on
- vt100
- back_tab cbt bt back tab (P)
- bell bel bl audible signal
- (bell) (P)
- carriage_return cr cr carriage return (P*)
- (P*)
- change_char_pitch cpi ZA Change number of
- characters per inch
- to #1
- change_line_pitch lpi ZB Change number of
- lines per inch to #1
- change_res_horz chr ZC Change horizontal
- resolution to #1
- change_res_vert cvr ZD Change vertical res-
- olution to #1
- change_scroll_region csr cs change region to
- line #1 to line #2
- (P)
- char_padding rmp rP like ip but when in
- insert mode
- clear_all_tabs tbc ct clear all tab stops
- (P)
- clear_margins mgc MC clear right and left
- soft margins
- clear_screen clear cl clear screen and
- home cursor (P*)
- clr_bol el1 cb Clear to beginning
- of line
-
-
- clr_eol el ce clear to end of line
- (P)
- clr_eos ed cd clear to end of
- screen (P*)
- column_address hpa ch horizontal position
- #1, absolute (P)
- command_character cmdch CC terminal settable
- cmd character in
- prototype !?
- create_window cwin CW define a window #1
- from #2,#3 to #4,#5
- cursor_address cup cm move to row #1 col-
- umns #2
- cursor_down cud1 do down one line
- cursor_home home ho home cursor (if no
- cup)
- cursor_invisible civis vi make cursor invisi-
- ble
- cursor_left cub1 le move left one space
- cursor_mem_address mrcup CM memory relative cur-
- sor addressing, move
- to row #1 columns #2
- cursor_normal cnorm ve make cursor appear
- normal (undo
- civis/cvvis)
- cursor_right cuf1 nd non-destructive
- space (move right
- one space)
- cursor_to_ll ll ll last line, first
- column (if no cup)
- cursor_up cuu1 up up one line
- cursor_visible cvvis vs make cursor very
- visible
- define_char defc ZE Define a character
- #1, #2 dots wide,
- descender #3
- delete_character dch1 dc delete character
- (P*)
- delete_line dl1 dl delete line (P*)
- dial_phone dial DI dial number #1
- dis_status_line dsl ds disable status line
- display_clock dclk DK display clock
- down_half_line hd hd half a line down
- ena_acs enacs eA enable alternate
- char set
- enter_alt_charset_mode smacs as start alternate
- character set (P)
- enter_am_mode smam SA turn on automatic
- margins
- enter_blink_mode blink mb turn on blinking
- enter_bold_mode bold md turn on bold (extra
- bright) mode
- enter_ca_mode smcup ti string to start pro-
- grams using cup
- enter_delete_mode smdc dm enter delete mode
- enter_dim_mode dim mh turn on half-bright
- mode
- enter_doublewide_mode swidm ZF Enter double-wide
- mode
- enter_draft_quality sdrfq ZG Enter draft-quality
- mode
- enter_insert_mode smir im enter insert mode
- enter_italics_mode sitm ZH Enter italic mode
- enter_leftward_mode slm ZI Start leftward car-
- riage motion
-
- enter_micro_mode smicm ZJ Start micro-motion
- mode
- enter_near_letter_quality snlq ZK Enter NLQ mode
- enter_normal_quality snrmq ZL Enter normal-quality
- mode
- enter_protected_mode prot mp turn on protected
- mode
- enter_reverse_mode rev mr turn on reverse
- video mode
- enter_secure_mode invis mk turn on blank mode
- (characters invisi-
- ble)
- enter_shadow_mode sshm ZM Enter shadow-print
- mode
- enter_standout_mode smso so begin standout mode
- enter_subscript_mode ssubm ZN Enter subscript mode
- enter_superscript_mode ssupm ZO Enter superscript
- mode
- enter_underline_mode smul us begin underline mode
- enter_upward_mode sum ZP Start upward car-
- riage motion
- enter_xon_mode smxon SX turn on xon/xoff
- handshaking
- erase_chars ech ec erase #1 characters
- (P)
- exit_alt_charset_mode rmacs ae end alternate char-
- acter set (P)
- exit_am_mode rmam RA turn off automatic
- margins
- exit_attribute_mode sgr0 me turn off all
- attributes
- exit_ca_mode rmcup te strings to end pro-
- grams using cup
- exit_delete_mode rmdc ed end delete mode
- exit_doublewide_mode rwidm ZQ End double-wide mode
- exit_insert_mode rmir ei exit insert mode
- exit_italics_mode ritm ZR End italic mode
- exit_leftward_mode rlm ZS End left-motion mode
- exit_micro_mode rmicm ZT End micro-motion
- mode
- exit_shadow_mode rshm ZU End shadow-print
- mode
- exit_standout_mode rmso se exit standout mode
- exit_subscript_mode rsubm ZV End subscript mode
- exit_superscript_mode rsupm ZW End superscript mode
- exit_underline_mode rmul ue exit underline mode
- exit_upward_mode rum ZX End reverse charac-
- ter motion
- exit_xon_mode rmxon RX turn off xon/xoff
- handshaking
- fixed_pause pause PA pause for 2-3 sec-
- onds
- flash_hook hook fh flash switch hook
- flash_screen flash vb visible bell (may
- not move cursor)
- form_feed ff ff hardcopy terminal
- page eject (P*)
- from_status_line fsl fs return from status
- line
- goto_window wingo WG go to window #1
- hangup hup HU hang-up phone
- init_1string is1 i1 initialization
- string
- init_2string is2 is initialization
- string
-
- init_3string is3 i3 initialization
- string
- init_file if if name of initializa-
- tion file
- init_prog iprog iP path name of program
- for initialization
- initialize_color initc Ic initialize color #1
- to (#2,#3,#4)
- initialize_pair initp Ip Initialize color
- pair #1 to
- fg=(#2,#3,#4),
- bg=(#5,#6,#7)
- insert_character ich1 ic insert character (P)
- insert_line il1 al insert line (P*)
- insert_padding ip ip insert padding after
- inserted character
- key_a1 ka1 K1 upper left of keypad
- key_a3 ka3 K3 upper right of key-
- pad
- key_b2 kb2 K2 center of keypad
- key_backspace kbs kb backspace key
- key_beg kbeg @1 begin key
- key_btab kcbt kB back-tab key
- key_c1 kc1 K4 lower left of keypad
- key_c3 kc3 K5 lower right of key-
- pad
- key_cancel kcan @2 cancel key
- key_catab ktbc ka clear-all-tabs key
- key_clear kclr kC clear-screen or
- erase key
- key_close kclo @3 close key
- key_command kcmd @4 command key
- key_copy kcpy @5 copy key
- key_create kcrt @6 create key
- key_ctab kctab kt clear-tab key
- key_dc kdch1 kD delete-character key
- key_dl kdl1 kL delete-line key
- key_down kcud1 kd down-arrow key
- key_eic krmir kM sent by rmir or smir
- in insert mode
- key_end kend @7 end key
- key_enter kent @8 enter/send key
- key_eol kel kE clear-to-end-of-line
- key
- key_eos ked kS clear-to-end-of-
- screen key
- key_exit kext @9 exit key
- key_f0 kf0 k0 F0 function key
- key_f1 kf1 k1 F1 function key
- key_f10 kf10 k; F10 function key
- key_f11 kf11 F1 F11 function key
- key_f12 kf12 F2 F12 function key
- key_f13 kf13 F3 F13 function key
- key_f14 kf14 F4 F14 function key
- key_f15 kf15 F5 F15 function key
- key_f16 kf16 F6 F16 function key
- key_f17 kf17 F7 F17 function key
- key_f18 kf18 F8 F18 function key
- key_f19 kf19 F9 F19 function key
- key_f2 kf2 k2 F2 function key
- key_f20 kf20 FA F20 function key
- key_f21 kf21 FB F21 function key
- key_f22 kf22 FC F22 function key
- key_f23 kf23 FD F23 function key
- key_f24 kf24 FE F24 function key
-
- key_f25 kf25 FF F25 function key
- key_f26 kf26 FG F26 function key
- key_f27 kf27 FH F27 function key
- key_f28 kf28 FI F28 function key
- key_f29 kf29 FJ F29 function key
- key_f3 kf3 k3 F3 function key
- key_f30 kf30 FK F30 function key
- key_f31 kf31 FL F31 function key
- key_f32 kf32 FM F32 function key
- key_f33 kf33 FN F33 function key
- key_f34 kf34 FO F34 function key
- key_f35 kf35 FP F35 function key
- key_f36 kf36 FQ F36 function key
- key_f37 kf37 FR F37 function key
- key_f38 kf38 FS F38 function key
- key_f39 kf39 FT F39 function key
- key_f4 kf4 k4 F4 function key
- key_f40 kf40 FU F40 function key
- key_f41 kf41 FV F41 function key
- key_f42 kf42 FW F42 function key
- key_f43 kf43 FX F43 function key
- key_f44 kf44 FY F44 function key
- key_f45 kf45 FZ F45 function key
- key_f46 kf46 Fa F46 function key
- key_f47 kf47 Fb F47 function key
- key_f48 kf48 Fc F48 function key
- key_f49 kf49 Fd F49 function key
- key_f5 kf5 k5 F5 function key
- key_f50 kf50 Fe F50 function key
- key_f51 kf51 Ff F51 function key
- key_f52 kf52 Fg F52 function key
- key_f53 kf53 Fh F53 function key
- key_f54 kf54 Fi F54 function key
- key_f55 kf55 Fj F55 function key
- key_f56 kf56 Fk F56 function key
- key_f57 kf57 Fl F57 function key
- key_f58 kf58 Fm F58 function key
- key_f59 kf59 Fn F59 function key
- key_f6 kf6 k6 F6 function key
- key_f60 kf60 Fo F60 function key
- key_f61 kf61 Fp F61 function key
- key_f62 kf62 Fq F62 function key
- key_f63 kf63 Fr F63 function key
- key_f7 kf7 k7 F7 function key
- key_f8 kf8 k8 F8 function key
- key_f9 kf9 k9 F9 function key
- key_find kfnd @0 find key
- key_help khlp %1 help key
- key_home khome kh home key
- key_ic kich1 kI insert-character key
- key_il kil1 kA insert-line key
- key_left kcub1 kl left-arrow key
- key_ll kll kH lower-left key (home
- down)
- key_mark kmrk %2 mark key
- key_message kmsg %3 message key
- key_move kmov %4 move key
- key_next knxt %5 next key
- key_npage knp kN next-page key
- key_open kopn %6 open key
- key_options kopt %7 options key
- key_ppage kpp kP previous-page key
- key_previous kprv %8 previous key
- key_print kprt %9 print key
- key_redo krdo %0 redo key
-
- key_reference kref &1 reference key
- key_refresh krfr &2 refresh key
- key_replace krpl &3 replace key
- key_restart krst &4 restart key
- key_resume kres &5 resume key
- key_right kcuf1 kr right-arrow key
- key_save ksav &6 save key
- key_sbeg kBEG &9 shifted begin key
- key_scancel kCAN &0 shifted cancel key
- key_scommand kCMD *1 shifted command key
- key_scopy kCPY *2 shifted copy key
- key_screate kCRT *3 shifted create key
- key_sdc kDC *4 shifted delete-char-
- acter key
- key_sdl kDL *5 shifted delete-line
- key
- key_select kslt *6 select key
- key_send kEND *7 shifted end key
- key_seol kEOL *8 shifted clear-to-
- end-of-line key
- key_sexit kEXT *9 shifted exit key
- key_sf kind kF scroll-forward key
- key_sfind kFND *0 shifted find key
- key_shelp kHLP #1 shifted help key
- key_shome kHOM #2 shifted home key
- key_sic kIC #3 shifted insert-char-
- acter key
- key_sleft kLFT #4 shifted left-arrow
- key
- key_smessage kMSG %a shifted message key
- key_smove kMOV %b shifted move key
- key_snext kNXT %c shifted next key
- key_soptions kOPT %d shifted options key
- key_sprevious kPRV %e shifted previous key
- key_sprint kPRT %f shifted print key
- key_sr kri kR scroll-backward key
- key_sredo kRDO %g shifted redo key
- key_sreplace kRPL %h shifted replace key
- key_sright kRIT %i shifted right-arrow
- key
- key_srsume kRES %j shifted resume key
- key_ssave kSAV !1 shifted save key
- key_ssuspend kSPD !2 shifted suspend key
- key_stab khts kT set-tab key
- key_sundo kUND !3 shifted undo key
- key_suspend kspd &7 suspend key
- key_undo kund &8 undo key
- key_up kcuu1 ku up-arrow key
- keypad_local rmkx ke leave 'key-
- board_transmit' mode
- keypad_xmit smkx ks enter 'key-
- board_transmit' mode
- lab_f0 lf0 l0 label on function
- key f0 if not f0
- lab_f1 lf1 l1 label on function
- key f1 if not f1
- lab_f10 lf10 la label on function
- key f10 if not f10
- lab_f2 lf2 l2 label on function
- key f2 if not f2
- lab_f3 lf3 l3 label on function
- key f3 if not f3
- lab_f4 lf4 l4 label on function
- key f4 if not f4
-
-
- lab_f5 lf5 l5 label on function
- key f5 if not f5
- lab_f6 lf6 l6 label on function
- key f6 if not f6
- lab_f7 lf7 l7 label on function
- key f7 if not f7
- lab_f8 lf8 l8 label on function
- key f8 if not f8
- lab_f9 lf9 l9 label on function
- key f9 if not f9
- label_format fln Lf label format
- label_off rmln LF turn off soft labels
- label_on smln LO turn on soft labels
- meta_off rmm mo turn off meta mode
- meta_on smm mm turn on meta mode
- (8th-bit on)
- micro_column_address mhpa ZY Like column_address
- in micro mode
- micro_down mcud1 ZZ Like cursor_down in
- micro mode
- micro_left mcub1 Za Like cursor_left in
- micro mode
- micro_right mcuf1 Zb Like cursor_right in
- micro mode
- micro_row_address mvpa Zc Like row_address #1
- in micro mode
- micro_up mcuu1 Zd Like cursor_up in
- micro mode
- newline nel nw newline (behave like
- cr followed by lf)
- order_of_pins porder Ze Match software bits
- to print-head pins
- orig_colors oc oc Set all color pairs
- to the original ones
- orig_pair op op Set default pair to
- its original value
- pad_char pad pc padding char
- (instead of null)
- parm_dch dch DC delete #1 characters
- (P*)
- parm_delete_line dl DL delete #1 lines (P*)
- parm_down_cursor cud DO down #1 lines (P*)
- parm_down_micro mcud Zf Like parm_down_cur-
- sor in micro mode
- parm_ich ich IC insert #1 characters
- (P*)
- parm_index indn SF scroll forward #1
- lines (P)
- parm_insert_line il AL insert #1 lines (P*)
- parm_left_cursor cub LE move #1 characters
- to the left (P)
- parm_left_micro mcub Zg Like parm_left_cur-
- sor in micro mode
- parm_right_cursor cuf RI move #1 characters
- to the right (P*)
- parm_right_micro mcuf Zh Like parm_right_cur-
- sor in micro mode
- parm_rindex rin SR scroll back #1 lines
- (P)
- parm_up_cursor cuu UP up #1 lines (P*)
- parm_up_micro mcuu Zi Like parm_up_cursor
- in micro mode
- pkey_key pfkey pk program function key
- #1 to type string #2
-
-
- pkey_local pfloc pl program function key
- #1 to execute string
- #2
- pkey_xmit pfx px program function key
- #1 to transmit
- string #2
- plab_norm pln pn program label #1 to
- show string #2
- print_screen mc0 ps print contents of
- screen
- prtr_non mc5p pO turn on printer for
- #1 bytes
- prtr_off mc4 pf turn off printer
- prtr_on mc5 po turn on printer
- pulse pulse PU select pulse dialing
- quick_dial qdial QD dial number #1 with-
- out checking
- remove_clock rmclk RC remove clock
- repeat_char rep rp repeat char #1 #2
- times (P*)
- req_for_input rfi RF send next input char
- (for ptys)
- reset_1string rs1 r1 reset string
- reset_2string rs2 r2 reset string
- reset_3string rs3 r3 reset string
- reset_file rf rf name of reset file
- restore_cursor rc rc restore cursor to
- position of last
- save_cursor
- row_address vpa cv vertical position #1
- absolute (P)
- save_cursor sc sc save current cursor
- position (P)
- scroll_forward ind sf scroll text up (P)
- scroll_reverse ri sr scroll text down (P)
- select_char_set scs Zj Select character
- set, #1
- set_attributes sgr sa define video
- attributes #1-#9
- (PG9)
- set_background setb Sb Set background color
- #1
- set_bottom_margin smgb Zk Set bottom margin at
- current line
- set_bottom_margin_parm smgbp Zl Set bottom margin at
- line #1 or (if smgtp
- is not given) #2
- lines from bottom
- set_clock sclk SC set clock, #1 hrs #2
- mins #3 secs
- set_color_pair scp sp Set current color
- pair to #1
- set_foreground setf Sf Set foreground color
- #1
- set_left_margin smgl ML set left soft margin
- at current col-
- umn. See
- smgl. (ML is not in
- BSD termcap).
- set_left_margin_parm smglp Zm Set left (right)
- margin at column #1
- set_right_margin smgr MR set right soft mar-
- gin at current col-
- umn
-
-
- set_right_margin_parm smgrp Zn Set right margin at
- column #1
- set_tab hts st set a tab in every
- row, current columns
- set_top_margin smgt Zo Set top margin at
- current line
- set_top_margin_parm smgtp Zp Set top (bottom)
- margin at row #1
- set_window wind wi current window is
- lines #1-#2 cols
- #3-#4
- start_bit_image sbim Zq Start printing bit
- image graphics
- start_char_set_def scsd Zr Start character set
- definition #1, with
- #2 characters in the
- set
- stop_bit_image rbim Zs Stop printing bit
- image graphics
- stop_char_set_def rcsd Zt End definition of
- character set #1
- subscript_characters subcs Zu List of subscript-
- able characters
- superscript_characters supcs Zv List of superscript-
- able characters
- tab ht ta tab to next 8-space
- hardware tab stop
- these_cause_cr docr Zw Printing any of
- these characters
- causes CR
- to_status_line tsl ts move to status line,
- column #1
- tone tone TO select touch tone
- dialing
- underline_char uc uc underline char and
- move past it
- up_half_line hu hu half a line up
- user0 u0 u0 User string #0
- user1 u1 u1 User string #1
- user2 u2 u2 User string #2
- user3 u3 u3 User string #3
- user4 u4 u4 User string #4
- user5 u5 u5 User string #5
- user6 u6 u6 User string #6
- user7 u7 u7 User string #7
- user8 u8 u8 User string #8
- user9 u9 u9 User string #9
- wait_tone wait WA wait for dial-tone
- xoff_character xoffc XF XOFF character
- xon_character xonc XN XON character
- zero_motion zerom Zx No motion for subse-
- quent character
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ acs_chars acsc ac graphics charset
+ pairs, based on
+ vt100
+ back_tab cbt bt back tab (P)
+ bell bel bl audible signal
+ (bell) (P)
+ carriage_return cr cr carriage return (P*)
+ (P*)
+ change_char_pitch cpi ZA Change number of
+ characters per inch
+ to #1
+ change_line_pitch lpi ZB Change number of
+ lines per inch to #1
+ change_res_horz chr ZC Change horizontal
+ resolution to #1
+ change_res_vert cvr ZD Change vertical res-
+ olution to #1
+ change_scroll_region csr cs change region to
+ line #1 to line #2
+ (P)
+ char_padding rmp rP like ip but when in
+ insert mode
+
+
+ clear_all_tabs tbc ct clear all tab stops
+ (P)
+ clear_margins mgc MC clear right and left
+ soft margins
+ clear_screen clear cl clear screen and
+ home cursor (P*)
+ clr_bol el1 cb Clear to beginning
+ of line
+ clr_eol el ce clear to end of line
+ (P)
+ clr_eos ed cd clear to end of
+ screen (P*)
+ column_address hpa ch horizontal position
+ #1, absolute (P)
+ command_character cmdch CC terminal settable
+ cmd character in
+ prototype !?
+ create_window cwin CW define a window #1
+ from #2,#3 to #4,#5
+ cursor_address cup cm move to row #1 col-
+ umns #2
+ cursor_down cud1 do down one line
+ cursor_home home ho home cursor (if no
+ cup)
+ cursor_invisible civis vi make cursor invisi-
+ ble
+ cursor_left cub1 le move left one space
+ cursor_mem_address mrcup CM memory relative cur-
+ sor addressing, move
+ to row #1 columns #2
+ cursor_normal cnorm ve make cursor appear
+ normal (undo
+ civis/cvvis)
+ cursor_right cuf1 nd non-destructive
+ space (move right
+ one space)
+ cursor_to_ll ll ll last line, first
+ column (if no cup)
+ cursor_up cuu1 up up one line
+ cursor_visible cvvis vs make cursor very
+ visible
+ define_char defc ZE Define a character
+ #1, #2 dots wide,
+ descender #3
+ delete_character dch1 dc delete character
+ (P*)
+ delete_line dl1 dl delete line (P*)
+ dial_phone dial DI dial number #1
+ dis_status_line dsl ds disable status line
+ display_clock dclk DK display clock
+ down_half_line hd hd half a line down
+ ena_acs enacs eA enable alternate
+ char set
+ enter_alt_charset_mode smacs as start alternate
+ character set (P)
+ enter_am_mode smam SA turn on automatic
+ margins
+ enter_blink_mode blink mb turn on blinking
+ enter_bold_mode bold md turn on bold (extra
+ bright) mode
+ enter_ca_mode smcup ti string to start pro-
+ grams using cup
+ enter_delete_mode smdc dm enter delete mode
+ enter_dim_mode dim mh turn on half-bright
+ mode
+
+ enter_doublewide_mode swidm ZF Enter double-wide
+ mode
+ enter_draft_quality sdrfq ZG Enter draft-quality
+ mode
+ enter_insert_mode smir im enter insert mode
+ enter_italics_mode sitm ZH Enter italic mode
+ enter_leftward_mode slm ZI Start leftward car-
+ riage motion
+ enter_micro_mode smicm ZJ Start micro-motion
+ mode
+ enter_near_letter_quality snlq ZK Enter NLQ mode
+ enter_normal_quality snrmq ZL Enter normal-quality
+ mode
+ enter_protected_mode prot mp turn on protected
+ mode
+ enter_reverse_mode rev mr turn on reverse
+ video mode
+ enter_secure_mode invis mk turn on blank mode
+ (characters invisi-
+ ble)
+ enter_shadow_mode sshm ZM Enter shadow-print
+ mode
+ enter_standout_mode smso so begin standout mode
+ enter_subscript_mode ssubm ZN Enter subscript mode
+ enter_superscript_mode ssupm ZO Enter superscript
+ mode
+ enter_underline_mode smul us begin underline mode
+ enter_upward_mode sum ZP Start upward car-
+ riage motion
+ enter_xon_mode smxon SX turn on xon/xoff
+ handshaking
+ erase_chars ech ec erase #1 characters
+ (P)
+ exit_alt_charset_mode rmacs ae end alternate char-
+ acter set (P)
+ exit_am_mode rmam RA turn off automatic
+ margins
+ exit_attribute_mode sgr0 me turn off all
+ attributes
+ exit_ca_mode rmcup te strings to end pro-
+ grams using cup
+ exit_delete_mode rmdc ed end delete mode
+ exit_doublewide_mode rwidm ZQ End double-wide mode
+ exit_insert_mode rmir ei exit insert mode
+ exit_italics_mode ritm ZR End italic mode
+ exit_leftward_mode rlm ZS End left-motion mode
+ exit_micro_mode rmicm ZT End micro-motion
+ mode
+ exit_shadow_mode rshm ZU End shadow-print
+ mode
+ exit_standout_mode rmso se exit standout mode
+ exit_subscript_mode rsubm ZV End subscript mode
+ exit_superscript_mode rsupm ZW End superscript mode
+ exit_underline_mode rmul ue exit underline mode
+ exit_upward_mode rum ZX End reverse charac-
+ ter motion
+ exit_xon_mode rmxon RX turn off xon/xoff
+ handshaking
+ fixed_pause pause PA pause for 2-3 sec-
+ onds
+ flash_hook hook fh flash switch hook
+ flash_screen flash vb visible bell (may
+ not move cursor)
+ form_feed ff ff hardcopy terminal
+ page eject (P*)
+
+ from_status_line fsl fs return from status
+ line
+ goto_window wingo WG go to window #1
+ hangup hup HU hang-up phone
+ init_1string is1 i1 initialization
+ string
+ init_2string is2 is initialization
+ string
+ init_3string is3 i3 initialization
+ string
+ init_file if if name of initializa-
+ tion file
+ init_prog iprog iP path name of program
+ for initialization
+ initialize_color initc Ic initialize color #1
+ to (#2,#3,#4)
+ initialize_pair initp Ip Initialize color
+ pair #1 to
+ fg=(#2,#3,#4),
+ bg=(#5,#6,#7)
+ insert_character ich1 ic insert character (P)
+ insert_line il1 al insert line (P*)
+ insert_padding ip ip insert padding after
+ inserted character
+ key_a1 ka1 K1 upper left of keypad
+ key_a3 ka3 K3 upper right of key-
+ pad
+ key_b2 kb2 K2 center of keypad
+ key_backspace kbs kb backspace key
+ key_beg kbeg @1 begin key
+ key_btab kcbt kB back-tab key
+ key_c1 kc1 K4 lower left of keypad
+ key_c3 kc3 K5 lower right of key-
+ pad
+ key_cancel kcan @2 cancel key
+ key_catab ktbc ka clear-all-tabs key
+ key_clear kclr kC clear-screen or
+ erase key
+ key_close kclo @3 close key
+ key_command kcmd @4 command key
+ key_copy kcpy @5 copy key
+ key_create kcrt @6 create key
+ key_ctab kctab kt clear-tab key
+ key_dc kdch1 kD delete-character key
+ key_dl kdl1 kL delete-line key
+ key_down kcud1 kd down-arrow key
+ key_eic krmir kM sent by rmir or smir
+ in insert mode
+ key_end kend @7 end key
+ key_enter kent @8 enter/send key
+ key_eol kel kE clear-to-end-of-line
+ key
+ key_eos ked kS clear-to-end-of-
+ screen key
+ key_exit kext @9 exit key
+ key_f0 kf0 k0 F0 function key
+ key_f1 kf1 k1 F1 function key
+ key_f10 kf10 k; F10 function key
+ key_f11 kf11 F1 F11 function key
+ key_f12 kf12 F2 F12 function key
+ key_f13 kf13 F3 F13 function key
+ key_f14 kf14 F4 F14 function key
+ key_f15 kf15 F5 F15 function key
+ key_f16 kf16 F6 F16 function key
+ key_f17 kf17 F7 F17 function key
+
+ key_f18 kf18 F8 F18 function key
+ key_f19 kf19 F9 F19 function key
+ key_f2 kf2 k2 F2 function key
+ key_f20 kf20 FA F20 function key
+ key_f21 kf21 FB F21 function key
+ key_f22 kf22 FC F22 function key
+ key_f23 kf23 FD F23 function key
+ key_f24 kf24 FE F24 function key
+ key_f25 kf25 FF F25 function key
+ key_f26 kf26 FG F26 function key
+ key_f27 kf27 FH F27 function key
+ key_f28 kf28 FI F28 function key
+ key_f29 kf29 FJ F29 function key
+ key_f3 kf3 k3 F3 function key
+ key_f30 kf30 FK F30 function key
+ key_f31 kf31 FL F31 function key
+ key_f32 kf32 FM F32 function key
+ key_f33 kf33 FN F33 function key
+ key_f34 kf34 FO F34 function key
+ key_f35 kf35 FP F35 function key
+ key_f36 kf36 FQ F36 function key
+ key_f37 kf37 FR F37 function key
+ key_f38 kf38 FS F38 function key
+ key_f39 kf39 FT F39 function key
+ key_f4 kf4 k4 F4 function key
+ key_f40 kf40 FU F40 function key
+ key_f41 kf41 FV F41 function key
+ key_f42 kf42 FW F42 function key
+ key_f43 kf43 FX F43 function key
+ key_f44 kf44 FY F44 function key
+ key_f45 kf45 FZ F45 function key
+ key_f46 kf46 Fa F46 function key
+ key_f47 kf47 Fb F47 function key
+ key_f48 kf48 Fc F48 function key
+ key_f49 kf49 Fd F49 function key
+ key_f5 kf5 k5 F5 function key
+ key_f50 kf50 Fe F50 function key
+ key_f51 kf51 Ff F51 function key
+ key_f52 kf52 Fg F52 function key
+ key_f53 kf53 Fh F53 function key
+ key_f54 kf54 Fi F54 function key
+ key_f55 kf55 Fj F55 function key
+ key_f56 kf56 Fk F56 function key
+ key_f57 kf57 Fl F57 function key
+ key_f58 kf58 Fm F58 function key
+ key_f59 kf59 Fn F59 function key
+ key_f6 kf6 k6 F6 function key
+ key_f60 kf60 Fo F60 function key
+ key_f61 kf61 Fp F61 function key
+ key_f62 kf62 Fq F62 function key
+ key_f63 kf63 Fr F63 function key
+ key_f7 kf7 k7 F7 function key
+ key_f8 kf8 k8 F8 function key
+ key_f9 kf9 k9 F9 function key
+ key_find kfnd @0 find key
+ key_help khlp %1 help key
+ key_home khome kh home key
+ key_ic kich1 kI insert-character key
+ key_il kil1 kA insert-line key
+ key_left kcub1 kl left-arrow key
+ key_ll kll kH lower-left key (home
+ down)
+ key_mark kmrk %2 mark key
+ key_message kmsg %3 message key
+ key_move kmov %4 move key
+
+ key_next knxt %5 next key
+ key_npage knp kN next-page key
+ key_open kopn %6 open key
+ key_options kopt %7 options key
+ key_ppage kpp kP previous-page key
+ key_previous kprv %8 previous key
+ key_print kprt %9 print key
+ key_redo krdo %0 redo key
+ key_reference kref &1 reference key
+ key_refresh krfr &2 refresh key
+ key_replace krpl &3 replace key
+ key_restart krst &4 restart key
+ key_resume kres &5 resume key
+ key_right kcuf1 kr right-arrow key
+ key_save ksav &6 save key
+ key_sbeg kBEG &9 shifted begin key
+ key_scancel kCAN &0 shifted cancel key
+ key_scommand kCMD *1 shifted command key
+ key_scopy kCPY *2 shifted copy key
+ key_screate kCRT *3 shifted create key
+ key_sdc kDC *4 shifted delete-char-
+ acter key
+ key_sdl kDL *5 shifted delete-line
+ key
+ key_select kslt *6 select key
+ key_send kEND *7 shifted end key
+ key_seol kEOL *8 shifted clear-to-
+ end-of-line key
+ key_sexit kEXT *9 shifted exit key
+ key_sf kind kF scroll-forward key
+ key_sfind kFND *0 shifted find key
+ key_shelp kHLP #1 shifted help key
+ key_shome kHOM #2 shifted home key
+ key_sic kIC #3 shifted insert-char-
+ acter key
+ key_sleft kLFT #4 shifted left-arrow
+ key
+ key_smessage kMSG %a shifted message key
+ key_smove kMOV %b shifted move key
+ key_snext kNXT %c shifted next key
+ key_soptions kOPT %d shifted options key
+ key_sprevious kPRV %e shifted previous key
+ key_sprint kPRT %f shifted print key
+ key_sr kri kR scroll-backward key
+ key_sredo kRDO %g shifted redo key
+ key_sreplace kRPL %h shifted replace key
+ key_sright kRIT %i shifted right-arrow
+ key
+ key_srsume kRES %j shifted resume key
+ key_ssave kSAV !1 shifted save key
+ key_ssuspend kSPD !2 shifted suspend key
+ key_stab khts kT set-tab key
+ key_sundo kUND !3 shifted undo key
+ key_suspend kspd &7 suspend key
+ key_undo kund &8 undo key
+ key_up kcuu1 ku up-arrow key
+ keypad_local rmkx ke leave 'key-
+ board_transmit' mode
+ keypad_xmit smkx ks enter 'key-
+ board_transmit' mode
+ lab_f0 lf0 l0 label on function
+ key f0 if not f0
+ lab_f1 lf1 l1 label on function
+ key f1 if not f1
+
+
+ lab_f10 lf10 la label on function
+ key f10 if not f10
+ lab_f2 lf2 l2 label on function
+ key f2 if not f2
+ lab_f3 lf3 l3 label on function
+ key f3 if not f3
+ lab_f4 lf4 l4 label on function
+ key f4 if not f4
+ lab_f5 lf5 l5 label on function
+ key f5 if not f5
+ lab_f6 lf6 l6 label on function
+ key f6 if not f6
+ lab_f7 lf7 l7 label on function
+ key f7 if not f7
+ lab_f8 lf8 l8 label on function
+ key f8 if not f8
+ lab_f9 lf9 l9 label on function
+ key f9 if not f9
+ label_format fln Lf label format
+ label_off rmln LF turn off soft labels
+ label_on smln LO turn on soft labels
+ meta_off rmm mo turn off meta mode
+ meta_on smm mm turn on meta mode
+ (8th-bit on)
+ micro_column_address mhpa ZY Like column_address
+ in micro mode
+ micro_down mcud1 ZZ Like cursor_down in
+ micro mode
+ micro_left mcub1 Za Like cursor_left in
+ micro mode
+ micro_right mcuf1 Zb Like cursor_right in
+ micro mode
+ micro_row_address mvpa Zc Like row_address #1
+ in micro mode
+ micro_up mcuu1 Zd Like cursor_up in
+ micro mode
+ newline nel nw newline (behave like
+ cr followed by lf)
+ order_of_pins porder Ze Match software bits
+ to print-head pins
+ orig_colors oc oc Set all color pairs
+ to the original ones
+ orig_pair op op Set default pair to
+ its original value
+ pad_char pad pc padding char
+ (instead of null)
+ parm_dch dch DC delete #1 characters
+ (P*)
+ parm_delete_line dl DL delete #1 lines (P*)
+ parm_down_cursor cud DO down #1 lines (P*)
+ parm_down_micro mcud Zf Like parm_down_cur-
+ sor in micro mode
+ parm_ich ich IC insert #1 characters
+ (P*)
+ parm_index indn SF scroll forward #1
+ lines (P)
+ parm_insert_line il AL insert #1 lines (P*)
+ parm_left_cursor cub LE move #1 characters
+ to the left (P)
+ parm_left_micro mcub Zg Like parm_left_cur-
+ sor in micro mode
+ parm_right_cursor cuf RI move #1 characters
+ to the right (P*)
+ parm_right_micro mcuf Zh Like parm_right_cur-
+ sor in micro mode
+
+ parm_rindex rin SR scroll back #1 lines
+ (P)
+ parm_up_cursor cuu UP up #1 lines (P*)
+ parm_up_micro mcuu Zi Like parm_up_cursor
+ in micro mode
+ pkey_key pfkey pk program function key
+ #1 to type string #2
+ pkey_local pfloc pl program function key
+ #1 to execute string
+ #2
+ pkey_xmit pfx px program function key
+ #1 to transmit
+ string #2
+ plab_norm pln pn program label #1 to
+ show string #2
+ print_screen mc0 ps print contents of
+ screen
+ prtr_non mc5p pO turn on printer for
+ #1 bytes
+ prtr_off mc4 pf turn off printer
+ prtr_on mc5 po turn on printer
+ pulse pulse PU select pulse dialing
+ quick_dial qdial QD dial number #1 with-
+ out checking
+ remove_clock rmclk RC remove clock
+ repeat_char rep rp repeat char #1 #2
+ times (P*)
+ req_for_input rfi RF send next input char
+ (for ptys)
+ reset_1string rs1 r1 reset string
+ reset_2string rs2 r2 reset string
+ reset_3string rs3 r3 reset string
+ reset_file rf rf name of reset file
+ restore_cursor rc rc restore cursor to
+ position of last
+ save_cursor
+ row_address vpa cv vertical position #1
+ absolute (P)
+ save_cursor sc sc save current cursor
+ position (P)
+ scroll_forward ind sf scroll text up (P)
+ scroll_reverse ri sr scroll text down (P)
+ select_char_set scs Zj Select character
+ set, #1
+ set_attributes sgr sa define video
+ attributes #1-#9
+ (PG9)
+ set_background setb Sb Set background color
+ #1
+ set_bottom_margin smgb Zk Set bottom margin at
+ current line
+ set_bottom_margin_parm smgbp Zl Set bottom margin at
+ line #1 or (if smgtp
+ is not given) #2
+ lines from bottom
+ set_clock sclk SC set clock, #1 hrs #2
+ mins #3 secs
+ set_color_pair scp sp Set current color
+ pair to #1
+ set_foreground setf Sf Set foreground color
+ #1
+
+
+
+
+
+ set_left_margin smgl ML set left soft margin
+ at current col-
+ umn. See smgl.
+ (ML is not in BSD
+ termcap).
+ set_left_margin_parm smglp Zm Set left (right)
+ margin at column #1
+ set_right_margin smgr MR set right soft mar-
+ gin at current col-
+ umn
+ set_right_margin_parm smgrp Zn Set right margin at
+ column #1
+ set_tab hts st set a tab in every
+ row, current columns
+ set_top_margin smgt Zo Set top margin at
+ current line
+ set_top_margin_parm smgtp Zp Set top (bottom)
+ margin at row #1
+ set_window wind wi current window is
+ lines #1-#2 cols
+ #3-#4
+ start_bit_image sbim Zq Start printing bit
+ image graphics
+ start_char_set_def scsd Zr Start character set
+ definition #1, with
+ #2 characters in the
+ set
+ stop_bit_image rbim Zs Stop printing bit
+ image graphics
+ stop_char_set_def rcsd Zt End definition of
+ character set #1
+ subscript_characters subcs Zu List of subscript-
+ able characters
+ superscript_characters supcs Zv List of superscript-
+ able characters
+ tab ht ta tab to next 8-space
+ hardware tab stop
+ these_cause_cr docr Zw Printing any of
+ these characters
+ causes CR
+ to_status_line tsl ts move to status line,
+ column #1
+ tone tone TO select touch tone
+ dialing
+ underline_char uc uc underline char and
+ move past it
+ up_half_line hu hu half a line up
+ user0 u0 u0 User string #0
+ user1 u1 u1 User string #1
+ user2 u2 u2 User string #2
+ user3 u3 u3 User string #3
+ user4 u4 u4 User string #4
+ user5 u5 u5 User string #5
+ user6 u6 u6 User string #6
+ user7 u7 u7 User string #7
+ user8 u8 u8 User string #8
+ user9 u9 u9 User string #9
+ wait_tone wait WA wait for dial-tone
+ xoff_character xoffc XF XOFF character
+ xon_character xonc XN XON character
+ zero_motion zerom Zx No motion for subse-
+ quent character
The following string capabilities are present in the SVr4.0 term struc-
ture, but were originally not documented in the man page.
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- alt_scancode_esc scesa S8 Alternate escape
- for scancode emu-
- lation
- bit_image_carriage_return bicr Yv Move to beginning
- of same row
-
-
- bit_image_newline binel Zz Move to next row
- of the bit image
- bit_image_repeat birep Xy Repeat bit image
- cell #1 #2 times
- char_set_names csnm Zy Produce #1'th item
- from list of char-
- acter set names
- code_set_init csin ci Init sequence for
- multiple codesets
- color_names colornm Yw Give name for
- color #1
- define_bit_image_region defbi Yx Define rectangular
- bit image region
- device_type devt dv Indicate lan-
- guage/codeset sup-
- port
- display_pc_char dispc S1 Display PC charac-
- ter #1
- end_bit_image_region endbi Yy End a bit-image
- region
- enter_pc_charset_mode smpch S2 Enter PC character
- display mode
- enter_scancode_mode smsc S4 Enter PC scancode
- mode
- exit_pc_charset_mode rmpch S3 Exit PC character
- display mode
- exit_scancode_mode rmsc S5 Exit PC scancode
- mode
- get_mouse getm Gm Curses should get
- button events,
- parameter #1 not
- documented.
- key_mouse kmous Km Mouse event has
- occurred
- mouse_info minfo Mi Mouse status
- information
- pc_term_options pctrm S6 PC terminal
- options
- pkey_plab pfxl xl Program function
- key #1 to type
- string #2 and show
- string #3
- req_mouse_pos reqmp RQ Request mouse
- position
- scancode_escape scesc S7 Escape for scan-
- code emulation
- set0_des_seq s0ds s0 Shift to codeset 0
- (EUC set 0, ASCII)
- set1_des_seq s1ds s1 Shift to codeset 1
- set2_des_seq s2ds s2 Shift to codeset 2
- set3_des_seq s3ds s3 Shift to codeset 3
- set_a_background setab AB Set background
- color to #1, using
- ANSI escape
- set_a_foreground setaf AF Set foreground
- color to #1, using
- ANSI escape
- set_color_band setcolor Yz Change to ribbon
- color #1
- set_lr_margin smglr ML Set both left and
- right margins to
- #1, #2. (ML is
- not in BSD term-
- cap).
-
-
- set_page_length slines YZ Set page length to
- #1 lines
- set_tb_margin smgtb MT Sets both top and
- bottom margins to
- #1, #2
-
- The XSI Curses standard added these hardcopy capabilities. They were
- used in some post-4.1 versions of System V curses, e.g., Solaris 2.5
- and IRIX 6.x. Except for <STRONG>YI</STRONG>, the <STRONG>ncurses</STRONG> termcap names for them are
- invented. According to the XSI Curses standard, they have no termcap
- names. If your compiled terminfo entries use these, they may not be
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ alt_scancode_esc scesa S8 Alternate escape
+ for scancode emu-
+ lation
+ bit_image_carriage_return bicr Yv Move to beginning
+ of same row
+ bit_image_newline binel Zz Move to next row
+ of the bit image
+ bit_image_repeat birep Xy Repeat bit image
+ cell #1 #2 times
+ char_set_names csnm Zy Produce #1'th item
+ from list of char-
+ acter set names
+ code_set_init csin ci Init sequence for
+ multiple codesets
+ color_names colornm Yw Give name for
+ color #1
+ define_bit_image_region defbi Yx Define rectangular
+ bit image region
+ device_type devt dv Indicate lan-
+ guage/codeset sup-
+ port
+ display_pc_char dispc S1 Display PC charac-
+ ter #1
+ end_bit_image_region endbi Yy End a bit-image
+ region
+ enter_pc_charset_mode smpch S2 Enter PC character
+ display mode
+ enter_scancode_mode smsc S4 Enter PC scancode
+ mode
+ exit_pc_charset_mode rmpch S3 Exit PC character
+ display mode
+ exit_scancode_mode rmsc S5 Exit PC scancode
+ mode
+ get_mouse getm Gm Curses should get
+ button events,
+ parameter #1 not
+ documented.
+ key_mouse kmous Km Mouse event has
+ occurred
+ mouse_info minfo Mi Mouse status
+ information
+ pc_term_options pctrm S6 PC terminal
+ options
+ pkey_plab pfxl xl Program function
+ key #1 to type
+ string #2 and show
+ string #3
+ req_mouse_pos reqmp RQ Request mouse
+ position
+ scancode_escape scesc S7 Escape for scan-
+ code emulation
+ set0_des_seq s0ds s0 Shift to codeset 0
+ (EUC set 0, ASCII)
+ set1_des_seq s1ds s1 Shift to codeset 1
+ set2_des_seq s2ds s2 Shift to codeset 2
+ set3_des_seq s3ds s3 Shift to codeset 3
+ set_a_background setab AB Set background
+ color to #1, using
+ ANSI escape
+ set_a_foreground setaf AF Set foreground
+ color to #1, using
+ ANSI escape
+
+ set_color_band setcolor Yz Change to ribbon
+ color #1
+ set_lr_margin smglr ML Set both left and
+ right margins to
+ #1, #2. (ML is
+ not in BSD term-
+ cap).
+ set_page_length slines YZ Set page length to
+ #1 lines
+ set_tb_margin smgtb MT Sets both top and
+ bottom margins to
+ #1, #2
+
+ The XSI Curses standard added these hardcopy capabilities. They were
+ used in some post-4.1 versions of System V curses, e.g., Solaris 2.5
+ and IRIX 6.x. Except for <STRONG>YI</STRONG>, the <STRONG>ncurses</STRONG> termcap names for them are
+ invented. According to the XSI Curses standard, they have no termcap
+ names. If your compiled terminfo entries use these, they may not be
binary-compatible with System V terminfo entries after SVr4.1; beware!
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- enter_horizontal_hl_mode ehhlm Xh Enter horizontal
- highlight mode
- enter_left_hl_mode elhlm Xl Enter left highlight
- mode
- enter_low_hl_mode elohlm Xo Enter low highlight
- mode
- enter_right_hl_mode erhlm Xr Enter right high-
- light mode
- enter_top_hl_mode ethlm Xt Enter top highlight
- mode
- enter_vertical_hl_mode evhlm Xv Enter vertical high-
- light mode
- set_a_attributes sgr1 sA Define second set of
- video attributes
- #1-#6
- set_pglen_inch slength YI Set page length to
- #1 hundredth of an
- inch (some implemen-
- tations use sL for
- termcap).
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ enter_horizontal_hl_mode ehhlm Xh Enter horizontal
+ highlight mode
+ enter_left_hl_mode elhlm Xl Enter left highlight
+ mode
+ enter_low_hl_mode elohlm Xo Enter low highlight
+ mode
+ enter_right_hl_mode erhlm Xr Enter right high-
+ light mode
+ enter_top_hl_mode ethlm Xt Enter top highlight
+ mode
+ enter_vertical_hl_mode evhlm Xv Enter vertical high-
+ light mode
+ set_a_attributes sgr1 sA Define second set of
+ video attributes
+ #1-#6
+ set_pglen_inch slength YI Set page length to
+ #1 hundredth of an
+ inch (some implemen-
+ tations use sL for
+ termcap).
</PRE><H3><a name="h3-User-Defined-Capabilities">User-Defined Capabilities</a></H3><PRE>
- The preceding section listed the <EM>predefined</EM> capabilities. They deal
- with some special features for terminals no longer (or possibly never)
- produced. Occasionally there are special features of newer terminals
- which are awkward or impossible to represent by reusing the predefined
+ The preceding section listed the <EM>predefined</EM> capabilities. They deal
+ with some special features for terminals no longer (or possibly never)
+ produced. Occasionally there are special features of newer terminals
+ which are awkward or impossible to represent by reusing the predefined
capabilities.
- <STRONG>ncurses</STRONG> addresses this limitation by allowing user-defined capabili-
+ <STRONG>ncurses</STRONG> addresses this limitation by allowing user-defined capabili-
ties. The <STRONG>tic</STRONG> and <STRONG>infocmp</STRONG> programs provide the <STRONG>-x</STRONG> option for this pur-
pose. When <STRONG>-x</STRONG> is set, <STRONG>tic</STRONG> treats unknown capabilities as user-defined.
- That is, if <STRONG>tic</STRONG> encounters a capability name which it does not recog-
- nize, it infers its type (boolean, number or string) from the syntax
- and makes an extended table entry for that capability. The
- <STRONG><A HREF="curs_extend.3x.html">use_extended_names(3x)</A></STRONG> function makes this information conditionally
+ That is, if <STRONG>tic</STRONG> encounters a capability name which it does not recog-
+ nize, it infers its type (boolean, number or string) from the syntax
+ and makes an extended table entry for that capability. The
+ <STRONG><A HREF="curs_extend.3x.html">use_extended_names(3x)</A></STRONG> function makes this information conditionally
available to applications. The ncurses library provides the data leav-
ing most of the behavior to applications:
- <STRONG>o</STRONG> User-defined capability strings whose name begins with "k" are
+ <STRONG>o</STRONG> User-defined capability strings whose name begins with "k" are
treated as function keys.
- <STRONG>o</STRONG> The types (boolean, number, string) determined by <STRONG>tic</STRONG> can be
+ <STRONG>o</STRONG> The types (boolean, number, string) determined by <STRONG>tic</STRONG> can be
inferred by successful calls on <STRONG>tigetflag</STRONG>, etc.
<STRONG>o</STRONG> If the capability name happens to be two characters, the capability
While termcap is said to be extensible because it does not use a prede-
fined set of capabilities, in practice it has been limited to the capa-
- bilities defined by terminfo implementations. As a rule, user-defined
+ bilities defined by terminfo implementations. As a rule, user-defined
capabilities intended for use by termcap applications should be limited
- to booleans and numbers to avoid running past the 1023 byte limit
+ to booleans and numbers to avoid running past the 1023 byte limit
assumed by termcap implementations and their applications. In particu-
- lar, providing extended sets of function keys (past the 60 numbered
- keys and the handful of special named keys) is best done using the
+ lar, providing extended sets of function keys (past the 60 numbered
+ keys and the handful of special named keys) is best done using the
longer names available using terminfo.
</PRE><H3><a name="h3-A-Sample-Entry">A Sample Entry</a></H3><PRE>
The following entry, describing an ANSI-standard terminal, is represen-
- tative of what a <STRONG>terminfo</STRONG> entry for a modern terminal typically looks
+ tative of what a <STRONG>terminfo</STRONG> entry for a modern terminal typically looks
like.
ansi|ansi/pc-term compatible with color,
smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%i%p1%dd,
- Entries may continue onto multiple lines by placing white space at the
- beginning of each line except the first. Comments may be included on
+ Entries may continue onto multiple lines by placing white space at the
+ beginning of each line except the first. Comments may be included on
lines beginning with "#". Capabilities in <EM>terminfo</EM> are of three types:
<STRONG>o</STRONG> Boolean capabilities which indicate that the terminal has some par-
<STRONG>o</STRONG> numeric capabilities giving the size of the terminal or the size of
particular delays, and
- <STRONG>o</STRONG> string capabilities, which give a sequence which can be used to
+ <STRONG>o</STRONG> string capabilities, which give a sequence which can be used to
perform particular terminal operations.
</PRE><H3><a name="h3-Types-of-Capabilities">Types of Capabilities</a></H3><PRE>
All capabilities have names. For instance, the fact that ANSI-standard
- terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an automatic return and line-
- feed when the end of a line is reached) is indicated by the capability
- <STRONG>am</STRONG>. Hence the description of ansi includes <STRONG>am</STRONG>. Numeric capabilities
- are followed by the character "#" and then a positive value. Thus
+ terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an automatic return and line-
+ feed when the end of a line is reached) is indicated by the capability
+ <STRONG>am</STRONG>. Hence the description of ansi includes <STRONG>am</STRONG>. Numeric capabilities
+ are followed by the character "#" and then a positive value. Thus
<STRONG>cols</STRONG>, which indicates the number of columns the terminal has, gives the
- value "80" for ansi. Values for numeric capabilities may be specified
+ value "80" for ansi. Values for numeric capabilities may be specified
in decimal, octal or hexadecimal, using the C programming language con-
ventions (e.g., 255, 0377 and 0xff or 0xFF).
- Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to end of line
- sequence) are given by the two-character code, an "=", and then a
+ Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to end of line
+ sequence) are given by the two-character code, an "=", and then a
string ending at the next following ",".
A number of escape sequences are provided in the string valued capabil-
respectively.
X/Open Curses does not say what "appropriate <EM>x</EM>" might be. In practice,
- that is a printable ASCII graphic character. The special case "^?" is
- interpreted as DEL (127). In all other cases, the character value is
- AND'd with 0x1f, mapping to ASCII control codes in the range 0 through
+ that is a printable ASCII graphic character. The special case "^?" is
+ interpreted as DEL (127). In all other cases, the character value is
+ AND'd with 0x1f, mapping to ASCII control codes in the range 0 through
31.
Other escapes include
<STRONG>o</STRONG> and <STRONG>\0</STRONG> for null.
<STRONG>\0</STRONG> will produce \200, which does not terminate a string but behaves
- as a null character on most terminals, providing CS7 is specified.
+ as a null character on most terminals, providing CS7 is specified.
See <STRONG>stty(1)</STRONG>.
- The reason for this quirk is to maintain binary compatibility of
- the compiled terminfo files with other implementations, e.g., the
- SVr4 systems, which document this. Compiled terminfo files use
- null-terminated strings, with no lengths. Modifying this would
+ The reason for this quirk is to maintain binary compatibility of
+ the compiled terminfo files with other implementations, e.g., the
+ SVr4 systems, which document this. Compiled terminfo files use
+ null-terminated strings, with no lengths. Modifying this would
require a new binary format, which would not work with other imple-
mentations.
Finally, characters may be given as three octal digits after a <STRONG>\</STRONG>.
- A delay in milliseconds may appear anywhere in a string capability,
- enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>, and padding characters
+ A delay in milliseconds may appear anywhere in a string capability,
+ enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>, and padding characters
are supplied by <STRONG><A HREF="curs_terminfo.3x.html">tputs(3x)</A></STRONG> to provide this delay.
<STRONG>o</STRONG> The delay must be a number with at most one decimal place of preci-
sion; it may be followed by suffixes "*" or "/" or both.
- <STRONG>o</STRONG> A "*" indicates that the padding required is proportional to the
- number of lines affected by the operation, and the amount given is
- the per-affected-unit padding required. (In the case of insert
+ <STRONG>o</STRONG> A "*" indicates that the padding required is proportional to the
+ number of lines affected by the operation, and the amount given is
+ the per-affected-unit padding required. (In the case of insert
character, the factor is still the number of <EM>lines</EM> affected.)
Normally, padding is advisory if the device has the <STRONG>xon</STRONG> capability;
it is used for cost computation but does not trigger delays.
- <STRONG>o</STRONG> A "/" suffix indicates that the padding is mandatory and forces a
+ <STRONG>o</STRONG> A "/" suffix indicates that the padding is mandatory and forces a
delay of the given number of milliseconds even on devices for which
<STRONG>xon</STRONG> is present to indicate flow control.
- Sometimes individual capabilities must be commented out. To do this,
- put a period before the capability name. For example, see the second
+ Sometimes individual capabilities must be commented out. To do this,
+ put a period before the capability name. For example, see the second
<STRONG>ind</STRONG> in the example above.
</PRE><H3><a name="h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></H3><PRE>
- The <STRONG>ncurses</STRONG> library searches for terminal descriptions in several
- places. It uses only the first description found. The library has a
- compiled-in list of places to search which can be overridden by envi-
- ronment variables. Before starting to search, <STRONG>ncurses</STRONG> eliminates
+ The <STRONG>ncurses</STRONG> library searches for terminal descriptions in several
+ places. It uses only the first description found. The library has a
+ compiled-in list of places to search which can be overridden by envi-
+ ronment variables. Before starting to search, <STRONG>ncurses</STRONG> eliminates
duplicates in its search list.
- <STRONG>o</STRONG> If the environment variable TERMINFO is set, it is interpreted as
+ <STRONG>o</STRONG> If the environment variable TERMINFO is set, it is interpreted as
the pathname of a directory containing the compiled description you
are working on. Only that directory is searched.
- <STRONG>o</STRONG> If TERMINFO is not set, <STRONG>ncurses</STRONG> will instead look in the directory
+ <STRONG>o</STRONG> If TERMINFO is not set, <STRONG>ncurses</STRONG> will instead look in the directory
<STRONG>$HOME/.terminfo</STRONG> for a compiled description.
- <STRONG>o</STRONG> Next, if the environment variable TERMINFO_DIRS is set, <STRONG>ncurses</STRONG>
- will interpret the contents of that variable as a list of colon-
+ <STRONG>o</STRONG> Next, if the environment variable TERMINFO_DIRS is set, <STRONG>ncurses</STRONG>
+ will interpret the contents of that variable as a list of colon-
separated directories (or database files) to be searched.
- An empty directory name (i.e., if the variable begins or ends with
- a colon, or contains adjacent colons) is interpreted as the system
+ An empty directory name (i.e., if the variable begins or ends with
+ a colon, or contains adjacent colons) is interpreted as the system
location <EM>/usr/share/terminfo</EM>.
<STRONG>o</STRONG> Finally, <STRONG>ncurses</STRONG> searches these compiled-in locations:
- <STRONG>o</STRONG> a list of directories (/usr/local/ncurses/share/ter-
+ <STRONG>o</STRONG> a list of directories (/usr/local/ncurses/share/ter-
minfo:/usr/share/terminfo), and
- <STRONG>o</STRONG> the system terminfo directory, <EM>/usr/share/terminfo</EM> (the com-
+ <STRONG>o</STRONG> the system terminfo directory, <EM>/usr/share/terminfo</EM> (the com-
piled-in default).
</PRE><H3><a name="h3-Preparing-Descriptions">Preparing Descriptions</a></H3><PRE>
- We now outline how to prepare descriptions of terminals. The most
- effective way to prepare a terminal description is by imitating the
- description of a similar terminal in <EM>terminfo</EM> and to build up a
+ We now outline how to prepare descriptions of terminals. The most
+ effective way to prepare a terminal description is by imitating the
+ description of a similar terminal in <EM>terminfo</EM> and to build up a
description gradually, using partial descriptions with <EM>vi</EM> or some other
- screen-oriented program to check that they are correct. Be aware that
- a very unusual terminal may expose deficiencies in the ability of the
+ screen-oriented program to check that they are correct. Be aware that
+ a very unusual terminal may expose deficiencies in the ability of the
<EM>terminfo</EM> file to describe it or bugs in the screen-handling code of the
test program.
- To get the padding for insert line right (if the terminal manufacturer
- did not document it) a severe test is to edit a large file at 9600
+ To get the padding for insert line right (if the terminal manufacturer
+ did not document it) a severe test is to edit a large file at 9600
baud, delete 16 or so lines from the middle of the screen, then hit the
"u" key several times quickly. If the terminal messes up, more padding
is usually needed. A similar test can be used for insert character.
</PRE><H3><a name="h3-Basic-Capabilities">Basic Capabilities</a></H3><PRE>
- The number of columns on each line for the terminal is given by the
- <STRONG>cols</STRONG> numeric capability. If the terminal is a CRT, then the number of
- lines on the screen is given by the <STRONG>lines</STRONG> capability. If the terminal
- wraps around to the beginning of the next line when it reaches the
- right margin, then it should have the <STRONG>am</STRONG> capability. If the terminal
- can clear its screen, leaving the cursor in the home position, then
- this is given by the <STRONG>clear</STRONG> string capability. If the terminal over-
- strikes (rather than clearing a position when a character is struck
- over) then it should have the <STRONG>os</STRONG> capability. If the terminal is a
+ The number of columns on each line for the terminal is given by the
+ <STRONG>cols</STRONG> numeric capability. If the terminal is a CRT, then the number of
+ lines on the screen is given by the <STRONG>lines</STRONG> capability. If the terminal
+ wraps around to the beginning of the next line when it reaches the
+ right margin, then it should have the <STRONG>am</STRONG> capability. If the terminal
+ can clear its screen, leaving the cursor in the home position, then
+ this is given by the <STRONG>clear</STRONG> string capability. If the terminal over-
+ strikes (rather than clearing a position when a character is struck
+ over) then it should have the <STRONG>os</STRONG> capability. If the terminal is a
printing terminal, with no soft copy unit, give it both <STRONG>hc</STRONG> and <STRONG>os</STRONG>. (<STRONG>os</STRONG>
- applies to storage scope terminals, such as TEKTRONIX 4010 series, as
- well as hard copy and APL terminals.) If there is a code to move the
+ applies to storage scope terminals, such as TEKTRONIX 4010 series, as
+ well as hard copy and APL terminals.) If there is a code to move the
cursor to the left edge of the current row, give this as <STRONG>cr</STRONG>. (Normally
- this will be carriage return, control M.) If there is a code to pro-
+ this will be carriage return, control/M.) If there is a code to pro-
duce an audible signal (bell, beep, etc) give this as <STRONG>bel</STRONG>.
If there is a code to move the cursor one position to the left (such as
- backspace) that capability should be given as <STRONG>cub1</STRONG>. Similarly, codes
- to move to the right, up, and down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and
- <STRONG>cud1</STRONG>. These local cursor motions should not alter the text they pass
- over, for example, you would not normally use "<STRONG>cuf1</STRONG>= " because the
+ backspace) that capability should be given as <STRONG>cub1</STRONG>. Similarly, codes
+ to move to the right, up, and down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and
+ <STRONG>cud1</STRONG>. These local cursor motions should not alter the text they pass
+ over, for example, you would not normally use "<STRONG>cuf1</STRONG>= " because the
space would erase the character moved over.
A very important point here is that the local cursor motions encoded in
- <EM>terminfo</EM> are undefined at the left and top edges of a CRT terminal.
+ <EM>terminfo</EM> are undefined at the left and top edges of a CRT terminal.
Programs should never attempt to backspace around the left edge, unless
- <STRONG>bw</STRONG> is given, and never attempt to go up locally off the top. In order
- to scroll text up, a program will go to the bottom left corner of the
+ <STRONG>bw</STRONG> is given, and never attempt to go up locally off the top. In order
+ to scroll text up, a program will go to the bottom left corner of the
screen and send the <STRONG>ind</STRONG> (index) string.
- To scroll text down, a program goes to the top left corner of the
+ To scroll text down, a program goes to the top left corner of the
screen and sends the <STRONG>ri</STRONG> (reverse index) string. The strings <STRONG>ind</STRONG> and <STRONG>ri</STRONG>
are undefined when not on their respective corners of the screen.
- Parameterized versions of the scrolling sequences are <STRONG>indn</STRONG> and <STRONG>rin</STRONG>
- which have the same semantics as <STRONG>ind</STRONG> and <STRONG>ri</STRONG> except that they take one
- parameter, and scroll that many lines. They are also undefined except
+ Parameterized versions of the scrolling sequences are <STRONG>indn</STRONG> and <STRONG>rin</STRONG>
+ which have the same semantics as <STRONG>ind</STRONG> and <STRONG>ri</STRONG> except that they take one
+ parameter, and scroll that many lines. They are also undefined except
at the appropriate edge of the screen.
- The <STRONG>am</STRONG> capability tells whether the cursor sticks at the right edge of
- the screen when text is output, but this does not necessarily apply to
- a <STRONG>cuf1</STRONG> from the last column. The only local motion which is defined
- from the left edge is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from the left edge
- will move to the right edge of the previous row. If <STRONG>bw</STRONG> is not given,
- the effect is undefined. This is useful for drawing a box around the
+ The <STRONG>am</STRONG> capability tells whether the cursor sticks at the right edge of
+ the screen when text is output, but this does not necessarily apply to
+ a <STRONG>cuf1</STRONG> from the last column. The only local motion which is defined
+ from the left edge is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from the left edge
+ will move to the right edge of the previous row. If <STRONG>bw</STRONG> is not given,
+ the effect is undefined. This is useful for drawing a box around the
edge of the screen, for example. If the terminal has switch selectable
- automatic margins, the <EM>terminfo</EM> file usually assumes that this is on;
- i.e., <STRONG>am</STRONG>. If the terminal has a command which moves to the first col-
- umn of the next line, that command can be given as <STRONG>nel</STRONG> (newline). It
- does not matter if the command clears the remainder of the current
- line, so if the terminal has no <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be possible to
+ automatic margins, the <EM>terminfo</EM> file usually assumes that this is on;
+ i.e., <STRONG>am</STRONG>. If the terminal has a command which moves to the first col-
+ umn of the next line, that command can be given as <STRONG>nel</STRONG> (newline). It
+ does not matter if the command clears the remainder of the current
+ line, so if the terminal has no <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be possible to
craft a working <STRONG>nel</STRONG> out of one or both of them.
These capabilities suffice to describe hard-copy and "glass-tty" termi-
</PRE><H3><a name="h3-Parameterized-Strings">Parameterized Strings</a></H3><PRE>
- Cursor addressing and other strings requiring parameters in the termi-
- nal are described by a parameterized string capability, with <EM>printf</EM>-
+ Cursor addressing and other strings requiring parameters in the termi-
+ nal are described by a parameterized string capability, with <EM>printf</EM>-
like escapes such as <EM>%x</EM> in it. For example, to address the cursor, the
- <STRONG>cup</STRONG> capability is given, using two parameters: the row and column to
- address to. (Rows and columns are numbered from zero and refer to the
+ <STRONG>cup</STRONG> capability is given, using two parameters: the row and column to
+ address to. (Rows and columns are numbered from zero and refer to the
physical screen visible to the user, not to any unseen memory.) If the
- terminal has memory relative cursor addressing, that can be indicated
+ terminal has memory relative cursor addressing, that can be indicated
by <STRONG>mrcup</STRONG>.
- The parameter mechanism uses a stack and special <STRONG>%</STRONG> codes to manipulate
- it. Typically a sequence will push one of the parameters onto the
- stack and then print it in some format. Print (e.g., "%d") is a spe-
+ The parameter mechanism uses a stack and special <STRONG>%</STRONG> codes to manipulate
+ it. Typically a sequence will push one of the parameters onto the
+ stack and then print it in some format. Print (e.g., "%d") is a spe-
cial case. Other operations, including "%t" pop their operand from the
- stack. It is noted that more complex operations are often necessary,
+ stack. It is noted that more complex operations are often necessary,
e.g., in the <STRONG>sgr</STRONG> string.
The <STRONG>%</STRONG> encodings have the following meanings:
<STRONG>%%</STRONG> outputs "%"
<STRONG>%</STRONG><EM>[[</EM>:<EM>]flags][width[.precision]][</EM><STRONG>doxXs</STRONG><EM>]</EM>
- as in <STRONG>printf</STRONG>, flags are <EM>[-+#]</EM> and <EM>space</EM>. Use a ":" to allow the
- next character to be a "-" flag, avoiding interpreting "%-" as an
- operator.
+ as in <STRONG>printf(3)</STRONG>, flags are <EM>[-+#]</EM> and <EM>space</EM>. Use a ":" to allow
+ the next character to be a "-" flag, avoiding interpreting "%-" as
+ an operator.
%c print <EM>pop()</EM> like %c in <STRONG>printf</STRONG>
<STRONG>%g</STRONG><EM>[A-Z]</EM>
get static variable <EM>[a-z]</EM> and push it
- The terms "static" and "dynamic" are misleading. Historically,
+ The terms "static" and "dynamic" are misleading. Historically,
these are simply two different sets of variables, whose values are
- not reset between calls to <STRONG><A HREF="curs_terminfo.3x.html">tparm(3x)</A></STRONG>. However, that fact is not
+ not reset between calls to <STRONG><A HREF="curs_terminfo.3x.html">tparm(3x)</A></STRONG>. However, that fact is not
documented in other implementations. Relying on it will adversely
impact portability to other implementations.
<STRONG>%?</STRONG> <EM>expr</EM> <STRONG>%t</STRONG> <EM>thenpart</EM> <STRONG>%e</STRONG> <EM>elsepart</EM> <STRONG>%;</STRONG>
This forms an if-then-else. The <STRONG>%e</STRONG> <EM>elsepart</EM> is optional. Usually
- the <STRONG>%?</STRONG> <EM>expr</EM> part pushes a value onto the stack, and <STRONG>%t</STRONG> pops it
- from the stack, testing if it is nonzero (true). If it is zero
+ the <STRONG>%?</STRONG> <EM>expr</EM> part pushes a value onto the stack, and <STRONG>%t</STRONG> pops it
+ from the stack, testing if it is nonzero (true). If it is zero
(false), control passes to the <STRONG>%e</STRONG> (else) part.
It is possible to form else-if's a la Algol 68:
where ci are conditions, bi are bodies.
- Use the <STRONG>-f</STRONG> option of <STRONG>tic</STRONG> or <STRONG>infocmp</STRONG> to see the structure of if-
+ Use the <STRONG>-f</STRONG> option of <STRONG>tic</STRONG> or <STRONG>infocmp</STRONG> to see the structure of if-
then-else's. Some strings, e.g., <STRONG>sgr</STRONG> can be very complicated when
- written on one line. The <STRONG>-f</STRONG> option splits the string into lines
+ written on one line. The <STRONG>-f</STRONG> option splits the string into lines
with the parts indented.
- Binary operations are in postfix form with the operands in the usual
+ Binary operations are in postfix form with the operands in the usual
order. That is, to get x-5 one would use "%gx%{5}%-". <STRONG>%P</STRONG> and <STRONG>%g</STRONG> vari-
ables are persistent across escape-string evaluations.
- Consider the HP2645, which, to get to row 3 and column 12, needs to be
- sent \E&a12c03Y padded for 6 milliseconds. Note that the order of the
- rows and columns is inverted here, and that the row and column are
- printed as two digits. Thus its <STRONG>cup</STRONG> capability is
+ Consider the HP2645, which, to get to row 3 and column 12, needs to be
+ sent \E&a12c03Y padded for 6 milliseconds. Note that the order of the
+ rows and columns is inverted here, and that the row and column are
+ printed as two digits. Thus its <STRONG>cup</STRONG> capability is
"cup=6\E&%p2%2dc%p1%2dY".
- The Microterm ACT-IV needs the current row and column sent preceded by
- a <STRONG>^T</STRONG>, with the row and column simply encoded in binary,
- "cup=^T%p1%c%p2%c". Terminals which use "%c" need to be able to
- backspace the cursor (<STRONG>cub1</STRONG>), and to move the cursor up one line on the
- screen (<STRONG>cuu1</STRONG>). This is necessary because it is not always safe to
- transmit <STRONG>\n</STRONG> <STRONG>^D</STRONG> and <STRONG>\r</STRONG>, as the system may change or discard them. (The
- library routines dealing with terminfo set tty modes so that tabs are
- never expanded, so \t is safe to send. This turns out to be essential
+ The Microterm ACT-IV needs the current row and column sent preceded by
+ a <STRONG>^T</STRONG>, with the row and column simply encoded in binary,
+ "cup=^T%p1%c%p2%c". Terminals which use "%c" need to be able to
+ backspace the cursor (<STRONG>cub1</STRONG>), and to move the cursor up one line on the
+ screen (<STRONG>cuu1</STRONG>). This is necessary because it is not always safe to
+ transmit <STRONG>\n</STRONG> <STRONG>^D</STRONG> and <STRONG>\r</STRONG>, as the system may change or discard them. (The
+ library routines dealing with terminfo set tty modes so that tabs are
+ never expanded, so \t is safe to send. This turns out to be essential
for the Ann Arbor 4080.)
- A final example is the LSI ADM-3a, which uses row and column offset by
+ A final example is the LSI ADM-3a, which uses row and column offset by
a blank character, thus "cup=\E=%p1%' '%+%c%p2%' '%+%c". After sending
- "\E=", this pushes the first parameter, pushes the ASCII value for a
+ "\E=", this pushes the first parameter, pushes the ASCII value for a
space (32), adds them (pushing the sum on the stack in place of the two
- previous values) and outputs that value as a character. Then the same
- is done for the second parameter. More complex arithmetic is possible
+ previous values) and outputs that value as a character. Then the same
+ is done for the second parameter. More complex arithmetic is possible
using the stack.
</PRE><H3><a name="h3-Cursor-Motions">Cursor Motions</a></H3><PRE>
- If the terminal has a fast way to home the cursor (to very upper left
- corner of screen) then this can be given as <STRONG>home</STRONG>; similarly a fast way
- of getting to the lower left-hand corner can be given as <STRONG>ll</STRONG>; this may
+ If the terminal has a fast way to home the cursor (to very upper left
+ corner of screen) then this can be given as <STRONG>home</STRONG>; similarly a fast way
+ of getting to the lower left-hand corner can be given as <STRONG>ll</STRONG>; this may
involve going up with <STRONG>cuu1</STRONG> from the home position, but a program should
never do this itself (unless <STRONG>ll</STRONG> does) because it can make no assumption
- about the effect of moving up from the home position. Note that the
- home position is the same as addressing to (0,0): to the top left cor-
+ about the effect of moving up from the home position. Note that the
+ home position is the same as addressing to (0,0): to the top left cor-
ner of the screen, not of memory. (Thus, the \EH sequence on HP termi-
nals cannot be used for <STRONG>home</STRONG>.)
If the terminal has row or column absolute cursor addressing, these can
- be given as single parameter capabilities <STRONG>hpa</STRONG> (horizontal position
- absolute) and <STRONG>vpa</STRONG> (vertical position absolute). Sometimes these are
- shorter than the more general two parameter sequence (as with the
- hp2645) and can be used in preference to <STRONG>cup</STRONG>. If there are parameter-
- ized local motions (e.g., move <EM>n</EM> spaces to the right) these can be
- given as <STRONG>cud</STRONG>, <STRONG>cub</STRONG>, <STRONG>cuf</STRONG>, and <STRONG>cuu</STRONG> with a single parameter indicating how
- many spaces to move. These are primarily useful if the terminal does
+ be given as single parameter capabilities <STRONG>hpa</STRONG> (horizontal position
+ absolute) and <STRONG>vpa</STRONG> (vertical position absolute). Sometimes these are
+ shorter than the more general two parameter sequence (as with the
+ hp2645) and can be used in preference to <STRONG>cup</STRONG>. If there are parameter-
+ ized local motions (e.g., move <EM>n</EM> spaces to the right) these can be
+ given as <STRONG>cud</STRONG>, <STRONG>cub</STRONG>, <STRONG>cuf</STRONG>, and <STRONG>cuu</STRONG> with a single parameter indicating how
+ many spaces to move. These are primarily useful if the terminal does
not have <STRONG>cup</STRONG>, such as the TEKTRONIX 4025.
- If the terminal needs to be in a special mode when running a program
+ If the terminal needs to be in a special mode when running a program
that uses these capabilities, the codes to enter and exit this mode can
- be given as <STRONG>smcup</STRONG> and <STRONG>rmcup</STRONG>. This arises, for example, from terminals
- like the Concept with more than one page of memory. If the terminal
+ be given as <STRONG>smcup</STRONG> and <STRONG>rmcup</STRONG>. This arises, for example, from terminals
+ like the Concept with more than one page of memory. If the terminal
has only memory relative cursor addressing and not screen relative cur-
sor addressing, a one screen-sized window must be fixed into the termi-
- nal for cursor addressing to work properly. This is also used for the
- TEKTRONIX 4025, where <STRONG>smcup</STRONG> sets the command character to be the one
- used by terminfo. If the <STRONG>smcup</STRONG> sequence will not restore the screen
- after an <STRONG>rmcup</STRONG> sequence is output (to the state prior to outputting
+ nal for cursor addressing to work properly. This is also used for the
+ TEKTRONIX 4025, where <STRONG>smcup</STRONG> sets the command character to be the one
+ used by terminfo. If the <STRONG>smcup</STRONG> sequence will not restore the screen
+ after an <STRONG>rmcup</STRONG> sequence is output (to the state prior to outputting
<STRONG>rmcup</STRONG>), specify <STRONG>nrrmc</STRONG>.
</PRE><H3><a name="h3-Area-Clears">Area Clears</a></H3><PRE>
- If the terminal can clear from the current position to the end of the
- line, leaving the cursor where it is, this should be given as <STRONG>el</STRONG>. If
- the terminal can clear from the beginning of the line to the current
- position inclusive, leaving the cursor where it is, this should be
- given as <STRONG>el1</STRONG>. If the terminal can clear from the current position to
- the end of the display, then this should be given as <STRONG>ed</STRONG>. <STRONG>Ed</STRONG> is only
+ If the terminal can clear from the current position to the end of the
+ line, leaving the cursor where it is, this should be given as <STRONG>el</STRONG>. If
+ the terminal can clear from the beginning of the line to the current
+ position inclusive, leaving the cursor where it is, this should be
+ given as <STRONG>el1</STRONG>. If the terminal can clear from the current position to
+ the end of the display, then this should be given as <STRONG>ed</STRONG>. <STRONG>Ed</STRONG> is only
defined from the first column of a line. (Thus, it can be simulated by
a request to delete a large number of lines, if a true <STRONG>ed</STRONG> is not avail-
able.)
</PRE><H3><a name="h3-Insert_delete-line-and-vertical-motions">Insert/delete line and vertical motions</a></H3><PRE>
- If the terminal can open a new blank line before the line where the
- cursor is, this should be given as <STRONG>il1</STRONG>; this is done only from the
- first position of a line. The cursor must then appear on the newly
- blank line. If the terminal can delete the line which the cursor is
- on, then this should be given as <STRONG>dl1</STRONG>; this is done only from the first
+ If the terminal can open a new blank line before the line where the
+ cursor is, this should be given as <STRONG>il1</STRONG>; this is done only from the
+ first position of a line. The cursor must then appear on the newly
+ blank line. If the terminal can delete the line which the cursor is
+ on, then this should be given as <STRONG>dl1</STRONG>; this is done only from the first
position on the line to be deleted. Versions of <STRONG>il1</STRONG> and <STRONG>dl1</STRONG> which take
a single parameter and insert or delete that many lines can be given as
<STRONG>il</STRONG> and <STRONG>dl</STRONG>.
- If the terminal has a settable scrolling region (like the vt100) the
- command to set this can be described with the <STRONG>csr</STRONG> capability, which
+ If the terminal has a settable scrolling region (like the vt100) the
+ command to set this can be described with the <STRONG>csr</STRONG> capability, which
takes two parameters: the top and bottom lines of the scrolling region.
The cursor position is, alas, undefined after using this command.
- It is possible to get the effect of insert or delete line using <STRONG>csr</STRONG> on
- a properly chosen region; the <STRONG>sc</STRONG> and <STRONG>rc</STRONG> (save and restore cursor) com-
- mands may be useful for ensuring that your synthesized insert/delete
- string does not move the cursor. (Note that the <STRONG><A HREF="ncurses.3x.html">ncurses(3x)</A></STRONG> library
- does this synthesis automatically, so you need not compose
+ It is possible to get the effect of insert or delete line using <STRONG>csr</STRONG> on
+ a properly chosen region; the <STRONG>sc</STRONG> and <STRONG>rc</STRONG> (save and restore cursor) com-
+ mands may be useful for ensuring that your synthesized insert/delete
+ string does not move the cursor. (Note that the <STRONG><A HREF="ncurses.3x.html">ncurses(3x)</A></STRONG> library
+ does this synthesis automatically, so you need not compose
insert/delete strings for an entry with <STRONG>csr</STRONG>).
Yet another way to construct insert and delete might be to use a combi-
- nation of index with the memory-lock feature found on some terminals
+ nation of index with the memory-lock feature found on some terminals
(like the HP-700/90 series, which however also has insert/delete).
- Inserting lines at the top or bottom of the screen can also be done
- using <STRONG>ri</STRONG> or <STRONG>ind</STRONG> on many terminals without a true insert/delete line,
+ Inserting lines at the top or bottom of the screen can also be done
+ using <STRONG>ri</STRONG> or <STRONG>ind</STRONG> on many terminals without a true insert/delete line,
and is often faster even on terminals with those features.
The boolean <STRONG>non_dest_scroll_region</STRONG> should be set if each scrolling win-
- dow is effectively a view port on a screen-sized canvas. To test for
+ dow is effectively a view port on a screen-sized canvas. To test for
this capability, create a scrolling region in the middle of the screen,
- write something to the bottom line, move the cursor to the top of the
+ write something to the bottom line, move the cursor to the top of the
region, and do <STRONG>ri</STRONG> followed by <STRONG>dl1</STRONG> or <STRONG>ind</STRONG>. If the data scrolled off the
- bottom of the region by the <STRONG>ri</STRONG> re-appears, then scrolling is non-
- destructive. System V and XSI Curses expect that <STRONG>ind</STRONG>, <STRONG>ri</STRONG>, <STRONG>indn</STRONG>, and
- <STRONG>rin</STRONG> will simulate destructive scrolling; their documentation cautions
- you not to define <STRONG>csr</STRONG> unless this is true. This <STRONG>curses</STRONG> implementation
+ bottom of the region by the <STRONG>ri</STRONG> re-appears, then scrolling is non-
+ destructive. System V and XSI Curses expect that <STRONG>ind</STRONG>, <STRONG>ri</STRONG>, <STRONG>indn</STRONG>, and
+ <STRONG>rin</STRONG> will simulate destructive scrolling; their documentation cautions
+ you not to define <STRONG>csr</STRONG> unless this is true. This <STRONG>curses</STRONG> implementation
is more liberal and will do explicit erases after scrolling if <STRONG>ndsrc</STRONG> is
defined.
- If the terminal has the ability to define a window as part of memory,
- which all commands affect, it should be given as the parameterized
- string <STRONG>wind</STRONG>. The four parameters are the starting and ending lines in
+ If the terminal has the ability to define a window as part of memory,
+ which all commands affect, it should be given as the parameterized
+ string <STRONG>wind</STRONG>. The four parameters are the starting and ending lines in
memory and the starting and ending columns in memory, in that order.
If the terminal can retain display memory above, then the <STRONG>da</STRONG> capability
- should be given; if display memory can be retained below, then <STRONG>db</STRONG>
- should be given. These indicate that deleting a line or scrolling may
- bring non-blank lines up from below or that scrolling back with <STRONG>ri</STRONG> may
+ should be given; if display memory can be retained below, then <STRONG>db</STRONG>
+ should be given. These indicate that deleting a line or scrolling may
+ bring non-blank lines up from below or that scrolling back with <STRONG>ri</STRONG> may
bring down non-blank lines.
</PRE><H3><a name="h3-Insert_Delete-Character">Insert/Delete Character</a></H3><PRE>
- There are two basic kinds of intelligent terminals with respect to
- insert/delete character which can be described using <EM>terminfo.</EM> The
- most common insert/delete character operations affect only the charac-
- ters on the current line and shift characters off the end of the line
+ There are two basic kinds of intelligent terminals with respect to
+ insert/delete character which can be described using <EM>terminfo.</EM> The
+ most common insert/delete character operations affect only the charac-
+ ters on the current line and shift characters off the end of the line
rigidly. Other terminals, such as the Concept 100 and the Perkin Elmer
Owl, make a distinction between typed and untyped blanks on the screen,
- shifting upon an insert or delete only to an untyped blank on the
+ shifting upon an insert or delete only to an untyped blank on the
screen which is either eliminated, or expanded to two untyped blanks.
- You can determine the kind of terminal you have by clearing the screen
- and then typing text separated by cursor motions. Type "abc def"
- using local cursor motions (not spaces) between the "abc" and the
- "def". Then position the cursor before the "abc" and put the terminal
- in insert mode. If typing characters causes the rest of the line to
- shift rigidly and characters to fall off the end, then your terminal
- does not distinguish between blanks and untyped positions. If the
- "abc" shifts over to the "def" which then move together around the end
- of the current line and onto the next as you insert, you have the sec-
- ond type of terminal, and should give the capability <STRONG>in</STRONG>, which stands
+ You can determine the kind of terminal you have by clearing the screen
+ and then typing text separated by cursor motions. Type "abc def"
+ using local cursor motions (not spaces) between the "abc" and the
+ "def". Then position the cursor before the "abc" and put the terminal
+ in insert mode. If typing characters causes the rest of the line to
+ shift rigidly and characters to fall off the end, then your terminal
+ does not distinguish between blanks and untyped positions. If the
+ "abc" shifts over to the "def" which then move together around the end
+ of the current line and onto the next as you insert, you have the sec-
+ ond type of terminal, and should give the capability <STRONG>in</STRONG>, which stands
for "insert null".
- While these are two logically separate attributes (one line versus
- multi-line insert mode, and special treatment of untyped spaces) we
- have seen no terminals whose insert mode cannot be described with the
+ While these are two logically separate attributes (one line versus
+ multi-line insert mode, and special treatment of untyped spaces) we
+ have seen no terminals whose insert mode cannot be described with the
single attribute.
- Terminfo can describe both terminals which have an insert mode, and
- terminals which send a simple sequence to open a blank position on the
+ Terminfo can describe both terminals which have an insert mode, and
+ terminals which send a simple sequence to open a blank position on the
current line. Give as <STRONG>smir</STRONG> the sequence to get into insert mode. Give
- as <STRONG>rmir</STRONG> the sequence to leave insert mode. Now give as <STRONG>ich1</STRONG> any
- sequence needed to be sent just before sending the character to be
- inserted. Most terminals with a true insert mode will not give <STRONG>ich1</STRONG>;
- terminals which send a sequence to open a screen position should give
+ as <STRONG>rmir</STRONG> the sequence to leave insert mode. Now give as <STRONG>ich1</STRONG> any
+ sequence needed to be sent just before sending the character to be
+ inserted. Most terminals with a true insert mode will not give <STRONG>ich1</STRONG>;
+ terminals which send a sequence to open a screen position should give
it here.
- If your terminal has both, insert mode is usually preferable to <STRONG>ich1</STRONG>.
- Technically, you should not give both unless the terminal actually
- requires both to be used in combination. Accordingly, some non-curses
- applications get confused if both are present; the symptom is doubled
- characters in an update using insert. This requirement is now rare;
- most <STRONG>ich</STRONG> sequences do not require previous smir, and most smir insert
- modes do not require <STRONG>ich1</STRONG> before each character. Therefore, the new
- <STRONG>curses</STRONG> actually assumes this is the case and uses either <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> or
- <STRONG>ich</STRONG>/<STRONG>ich1</STRONG> as appropriate (but not both). If you have to write an entry
- to be used under new curses for a terminal old enough to need both,
+ If your terminal has both, insert mode is usually preferable to <STRONG>ich1</STRONG>.
+ Technically, you should not give both unless the terminal actually
+ requires both to be used in combination. Accordingly, some non-curses
+ applications get confused if both are present; the symptom is doubled
+ characters in an update using insert. This requirement is now rare;
+ most <STRONG>ich</STRONG> sequences do not require previous smir, and most smir insert
+ modes do not require <STRONG>ich1</STRONG> before each character. Therefore, the new
+ <STRONG>curses</STRONG> actually assumes this is the case and uses either <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> or
+ <STRONG>ich</STRONG>/<STRONG>ich1</STRONG> as appropriate (but not both). If you have to write an entry
+ to be used under new curses for a terminal old enough to need both,
include the <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> sequences in <STRONG>ich1</STRONG>.
If post insert padding is needed, give this as a number of milliseconds
- in <STRONG>ip</STRONG> (a string option). Any other sequence which may need to be sent
+ in <STRONG>ip</STRONG> (a string option). Any other sequence which may need to be sent
after an insert of a single character may also be given in <STRONG>ip</STRONG>. If your
- terminal needs both to be placed into an "insert mode" and a special
- code to precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG> and <STRONG>ich1</STRONG>
- can be given, and both will be used. The <STRONG>ich</STRONG> capability, with one
+ terminal needs both to be placed into an "insert mode" and a special
+ code to precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG> and <STRONG>ich1</STRONG>
+ can be given, and both will be used. The <STRONG>ich</STRONG> capability, with one
parameter, <EM>n</EM>, will repeat the effects of <STRONG>ich1</STRONG> <EM>n</EM> times.
- If padding is necessary between characters typed while not in insert
+ If padding is necessary between characters typed while not in insert
mode, give this as a number of milliseconds padding in <STRONG>rmp</STRONG>.
- It is occasionally necessary to move around while in insert mode to
- delete characters on the same line (e.g., if there is a tab after the
- insertion position). If your terminal allows motion while in insert
- mode you can give the capability <STRONG>mir</STRONG> to speed up inserting in this
- case. Omitting <STRONG>mir</STRONG> will affect only speed. Some terminals (notably
- Datamedia's) must not have <STRONG>mir</STRONG> because of the way their insert mode
+ It is occasionally necessary to move around while in insert mode to
+ delete characters on the same line (e.g., if there is a tab after the
+ insertion position). If your terminal allows motion while in insert
+ mode you can give the capability <STRONG>mir</STRONG> to speed up inserting in this
+ case. Omitting <STRONG>mir</STRONG> will affect only speed. Some terminals (notably
+ Datamedia's) must not have <STRONG>mir</STRONG> because of the way their insert mode
works.
- Finally, you can specify <STRONG>dch1</STRONG> to delete a single character, <STRONG>dch</STRONG> with
- one parameter, <EM>n</EM>, to delete <EM>n</EM> <EM>characters,</EM> and delete mode by giving
- <STRONG>smdc</STRONG> and <STRONG>rmdc</STRONG> to enter and exit delete mode (any mode the terminal
+ Finally, you can specify <STRONG>dch1</STRONG> to delete a single character, <STRONG>dch</STRONG> with
+ one parameter, <EM>n</EM>, to delete <EM>n</EM> <EM>characters,</EM> and delete mode by giving
+ <STRONG>smdc</STRONG> and <STRONG>rmdc</STRONG> to enter and exit delete mode (any mode the terminal
needs to be placed in for <STRONG>dch1</STRONG> to work).
- A command to erase <EM>n</EM> characters (equivalent to outputting <EM>n</EM> blanks
+ A command to erase <EM>n</EM> characters (equivalent to outputting <EM>n</EM> blanks
without moving the cursor) can be given as <STRONG>ech</STRONG> with one parameter.
</PRE><H3><a name="h3-Highlighting_-Underlining_-and-Visible-Bells">Highlighting, Underlining, and Visible Bells</a></H3><PRE>
If your terminal has one or more kinds of display attributes, these can
- be represented in a number of different ways. You should choose one
- display form as <EM>standout</EM> <EM>mode</EM>, representing a good, high contrast,
- easy-on-the-eyes, format for highlighting error messages and other
- attention getters. (If you have a choice, reverse video plus half-
- bright is good, or reverse video alone.) The sequences to enter and
- exit standout mode are given as <STRONG>smso</STRONG> and <STRONG>rmso</STRONG>, respectively. If the
- code to change into or out of standout mode leaves one or even two
- blank spaces on the screen, as the TVI 912 and Teleray 1061 do, then
+ be represented in a number of different ways. You should choose one
+ display form as <EM>standout</EM> <EM>mode</EM>, representing a good, high contrast,
+ easy-on-the-eyes, format for highlighting error messages and other
+ attention getters. (If you have a choice, reverse video plus half-
+ bright is good, or reverse video alone.) The sequences to enter and
+ exit standout mode are given as <STRONG>smso</STRONG> and <STRONG>rmso</STRONG>, respectively. If the
+ code to change into or out of standout mode leaves one or even two
+ blank spaces on the screen, as the TVI 912 and Teleray 1061 do, then
<STRONG>xmc</STRONG> should be given to tell how many spaces are left.
Codes to begin underlining and end underlining can be given as <STRONG>smul</STRONG> and
<STRONG>rmul</STRONG> respectively. If the terminal has a code to underline the current
- character and move the cursor one space to the right, such as the
+ character and move the cursor one space to the right, such as the
Microterm Mime, this can be given as <STRONG>uc</STRONG>.
- Other capabilities to enter various highlighting modes include <STRONG>blink</STRONG>
- (blinking) <STRONG>bold</STRONG> (bold or extra bright) <STRONG>dim</STRONG> (dim or half-bright) <STRONG>invis</STRONG>
- (blanking or invisible text) <STRONG>prot</STRONG> (protected) <STRONG>rev</STRONG> (reverse video) <STRONG>sgr0</STRONG>
- (turn off <EM>all</EM> attribute modes) <STRONG>smacs</STRONG> (enter alternate character set
+ Other capabilities to enter various highlighting modes include <STRONG>blink</STRONG>
+ (blinking) <STRONG>bold</STRONG> (bold or extra bright) <STRONG>dim</STRONG> (dim or half-bright) <STRONG>invis</STRONG>
+ (blanking or invisible text) <STRONG>prot</STRONG> (protected) <STRONG>rev</STRONG> (reverse video) <STRONG>sgr0</STRONG>
+ (turn off <EM>all</EM> attribute modes) <STRONG>smacs</STRONG> (enter alternate character set
mode) and <STRONG>rmacs</STRONG> (exit alternate character set mode). Turning on any of
these modes singly may or may not turn off other modes.
- If there is a sequence to set arbitrary combinations of modes, this
- should be given as <STRONG>sgr</STRONG> (set attributes), taking 9 parameters. Each
- parameter is either 0 or nonzero, as the corresponding attribute is on
- or off. The 9 parameters are, in order: standout, underline, reverse,
- blink, dim, bold, blank, protect, alternate character set. Not all
+ If there is a sequence to set arbitrary combinations of modes, this
+ should be given as <STRONG>sgr</STRONG> (set attributes), taking 9 parameters. Each
+ parameter is either 0 or nonzero, as the corresponding attribute is on
+ or off. The 9 parameters are, in order: standout, underline, reverse,
+ blink, dim, bold, blank, protect, alternate character set. Not all
modes need be supported by <STRONG>sgr</STRONG>, only those for which corresponding sep-
arate attribute commands exist.
For example, the DEC vt220 supports most of the modes:
- <STRONG>tparm</STRONG> <STRONG>parameter</STRONG> <STRONG>attribute</STRONG> <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
-
- none none \E[0m
- p1 standout \E[0;1;7m
- p2 underline \E[0;4m
- p3 reverse \E[0;7m
- p4 blink \E[0;5m
- p5 dim not available
- p6 bold \E[0;1m
- p7 invis \E[0;8m
- p8 protect not used
- p9 altcharset ^O (off) ^N (on)
-
- We begin each escape sequence by turning off any existing modes, since
- there is no quick way to determine whether they are active. Standout
- is set up to be the combination of reverse and bold. The vt220 termi-
- nal has a protect mode, though it is not commonly used in sgr because
- it protects characters on the screen from the host's erasures. The
- altcharset mode also is different in that it is either ^O or ^N,
- depending on whether it is off or on. If all modes are turned on, the
+ <STRONG>tparm</STRONG> <STRONG>parameter</STRONG> <STRONG>attribute</STRONG> <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
+
+ none none \E[0m
+ p1 standout \E[0;1;7m
+ p2 underline \E[0;4m
+ p3 reverse \E[0;7m
+ p4 blink \E[0;5m
+ p5 dim not available
+ p6 bold \E[0;1m
+ p7 invis \E[0;8m
+ p8 protect not used
+ p9 altcharset ^O (off) ^N (on)
+
+ We begin each escape sequence by turning off any existing modes, since
+ there is no quick way to determine whether they are active. Standout
+ is set up to be the combination of reverse and bold. The vt220 termi-
+ nal has a protect mode, though it is not commonly used in sgr because
+ it protects characters on the screen from the host's erasures. The
+ altcharset mode also is different in that it is either ^O or ^N,
+ depending on whether it is off or on. If all modes are turned on, the
resulting sequence is \E[0;1;4;5;7;8m^N.
- Some sequences are common to different modes. For example, ;7 is out-
- put when either p1 or p3 is true, that is, if either standout or
+ Some sequences are common to different modes. For example, ;7 is out-
+ put when either p1 or p3 is true, that is, if either standout or
reverse modes are turned on.
Writing out the above sequences, along with their dependencies yields
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p4%t;5%;
%?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- Remember that if you specify sgr, you must also specify sgr0. Also,
- some implementations rely on sgr being given if sgr0 is, Not all ter-
- minfo entries necessarily have an sgr string, however. Many terminfo
+ Remember that if you specify sgr, you must also specify sgr0. Also,
+ some implementations rely on sgr being given if sgr0 is, Not all ter-
+ minfo entries necessarily have an sgr string, however. Many terminfo
entries are derived from termcap entries which have no sgr string. The
only drawback to adding an sgr string is that termcap also assumes that
sgr0 does not exit alternate character set mode.
- Terminals with the "magic cookie" glitch (<STRONG>xmc</STRONG>) deposit special "cook-
+ Terminals with the "magic cookie" glitch (<STRONG>xmc</STRONG>) deposit special "cook-
ies" when they receive mode-setting sequences, which affect the display
- algorithm rather than having extra bits for each character. Some ter-
- minals, such as the HP 2621, automatically leave standout mode when
- they move to a new line or the cursor is addressed. Programs using
- standout mode should exit standout mode before moving the cursor or
- sending a newline, unless the <STRONG>msgr</STRONG> capability, asserting that it is
+ algorithm rather than having extra bits for each character. Some ter-
+ minals, such as the HP 2621, automatically leave standout mode when
+ they move to a new line or the cursor is addressed. Programs using
+ standout mode should exit standout mode before moving the cursor or
+ sending a newline, unless the <STRONG>msgr</STRONG> capability, asserting that it is
safe to move in standout mode, is present.
- If the terminal has a way of flashing the screen to indicate an error
- quietly (a bell replacement) then this can be given as <STRONG>flash</STRONG>; it must
+ If the terminal has a way of flashing the screen to indicate an error
+ quietly (a bell replacement) then this can be given as <STRONG>flash</STRONG>; it must
not move the cursor.
- If the cursor needs to be made more visible than normal when it is not
+ If the cursor needs to be made more visible than normal when it is not
on the bottom line (to make, for example, a non-blinking underline into
- an easier to find block or blinking underline) give this sequence as
+ an easier to find block or blinking underline) give this sequence as
<STRONG>cvvis</STRONG>. If there is a way to make the cursor completely invisible, give
- that as <STRONG>civis</STRONG>. The capability <STRONG>cnorm</STRONG> should be given which undoes the
+ that as <STRONG>civis</STRONG>. The capability <STRONG>cnorm</STRONG> should be given which undoes the
effects of both of these modes.
- If your terminal correctly generates underlined characters (with no
- special codes needed) even though it does not overstrike, then you
- should give the capability <STRONG>ul</STRONG>. If a character overstriking another
- leaves both characters on the screen, specify the capability <STRONG>os</STRONG>. If
+ If your terminal correctly generates underlined characters (with no
+ special codes needed) even though it does not overstrike, then you
+ should give the capability <STRONG>ul</STRONG>. If a character overstriking another
+ leaves both characters on the screen, specify the capability <STRONG>os</STRONG>. If
overstrikes are erasable with a blank, then this should be indicated by
giving <STRONG>eo</STRONG>.
</PRE><H3><a name="h3-Keypad-and-Function-Keys">Keypad and Function Keys</a></H3><PRE>
- If the terminal has a keypad that transmits codes when the keys are
- pressed, this information can be given. Note that it is not possible
+ If the terminal has a keypad that transmits codes when the keys are
+ pressed, this information can be given. Note that it is not possible
to handle terminals where the keypad only works in local (this applies,
- for example, to the unshifted HP 2621 keys). If the keypad can be set
+ for example, to the unshifted HP 2621 keys). If the keypad can be set
to transmit or not transmit, give these codes as <STRONG>smkx</STRONG> and <STRONG>rmkx</STRONG>. Other-
wise the keypad is assumed to always transmit.
- The codes sent by the left arrow, right arrow, up arrow, down arrow,
- and home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG> <STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG>
+ The codes sent by the left arrow, right arrow, up arrow, down arrow,
+ and home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG> <STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG>
respectively. If there are function keys such as f0, f1, ..., f10, the
- codes they send can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>. If these keys
- have labels other than the default f0 through f10, the labels can be
+ codes they send can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>. If these keys
+ have labels other than the default f0 through f10, the labels can be
given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>.
The codes transmitted by certain other special keys can be given:
<STRONG>o</STRONG> <STRONG>khts</STRONG> (set a tab stop in this column).
- In addition, if the keypad has a 3 by 3 array of keys including the
- four arrow keys, the other five keys can be given as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>,
- <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>. These keys are useful when the effects of a 3 by 3
+ In addition, if the keypad has a 3 by 3 array of keys including the
+ four arrow keys, the other five keys can be given as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>,
+ <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>. These keys are useful when the effects of a 3 by 3
directional pad are needed.
Strings to program function keys can be given as <STRONG>pfkey</STRONG>, <STRONG>pfloc</STRONG>, and <STRONG>pfx</STRONG>.
- A string to program screen labels should be specified as <STRONG>pln</STRONG>. Each of
- these strings takes two parameters: the function key number to program
+ A string to program screen labels should be specified as <STRONG>pln</STRONG>. Each of
+ these strings takes two parameters: the function key number to program
(from 0 to 10) and the string to program it with. Function key numbers
- out of this range may program undefined keys in a terminal dependent
- manner. The difference between the capabilities is that <STRONG>pfkey</STRONG> causes
- pressing the given key to be the same as the user typing the given
- string; <STRONG>pfloc</STRONG> causes the string to be executed by the terminal in
+ out of this range may program undefined keys in a terminal dependent
+ manner. The difference between the capabilities is that <STRONG>pfkey</STRONG> causes
+ pressing the given key to be the same as the user typing the given
+ string; <STRONG>pfloc</STRONG> causes the string to be executed by the terminal in
local; and <STRONG>pfx</STRONG> causes the string to be transmitted to the computer.
- The capabilities <STRONG>nlab</STRONG>, <STRONG>lw</STRONG> and <STRONG>lh</STRONG> define the number of programmable
- screen labels and their width and height. If there are commands to
- turn the labels on and off, give them in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>. <STRONG>smln</STRONG> is nor-
- mally output after one or more pln sequences to make sure that the
+ The capabilities <STRONG>nlab</STRONG>, <STRONG>lw</STRONG> and <STRONG>lh</STRONG> define the number of programmable
+ screen labels and their width and height. If there are commands to
+ turn the labels on and off, give them in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>. <STRONG>smln</STRONG> is nor-
+ mally output after one or more pln sequences to make sure that the
change becomes visible.
</PRE><H3><a name="h3-Tabs-and-Initialization">Tabs and Initialization</a></H3><PRE>
- If the terminal has hardware tabs, the command to advance to the next
- tab stop can be given as <STRONG>ht</STRONG> (usually control I). A "back-tab" command
- which moves leftward to the preceding tab stop can be given as <STRONG>cbt</STRONG>. By
- convention, if the teletype modes indicate that tabs are being expanded
- by the computer rather than being sent to the terminal, programs should
- not use <STRONG>ht</STRONG> or <STRONG>cbt</STRONG> even if they are present, since the user may not have
- the tab stops properly set. If the terminal has hardware tabs which
- are initially set every <EM>n</EM> spaces when the terminal is powered up, the
- numeric parameter <STRONG>it</STRONG> is given, showing the number of spaces the tabs
- are set to. This is normally used by the <STRONG>tset</STRONG> command to determine
- whether to set the mode for hardware tab expansion, and whether to set
- the tab stops. If the terminal has tab stops that can be saved in non-
- volatile memory, the terminfo description can assume that they are
- properly set.
-
- Other capabilities include <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and <STRONG>is3</STRONG>, initialization strings
- for the terminal, <STRONG>iprog</STRONG>, the path name of a program to be run to ini-
- tialize the terminal, and <STRONG>if</STRONG>, the name of a file containing long ini-
- tialization strings. These strings are expected to set the terminal
- into modes consistent with the rest of the terminfo description. They
- are normally sent to the terminal, by the <EM>init</EM> option of the <STRONG>tput</STRONG> pro-
- gram, each time the user logs in. They will be printed in the follow-
- ing order:
+ A few capabilities are used only for tabs:
+
+ <STRONG>o</STRONG> If the terminal has hardware tabs, the command to advance to the
+ next tab stop can be given as <STRONG>ht</STRONG> (usually control/I).
+
+ <STRONG>o</STRONG> A "back-tab" command which moves leftward to the preceding tab stop
+ can be given as <STRONG>cbt</STRONG>.
+
+ By convention, if the teletype modes indicate that tabs are being
+ expanded by the computer rather than being sent to the terminal,
+ programs should not use <STRONG>ht</STRONG> or <STRONG>cbt</STRONG> even if they are present, since
+ the user may not have the tab stops properly set.
+
+ <STRONG>o</STRONG> If the terminal has hardware tabs which are initially set every <EM>n</EM>
+ spaces when the terminal is powered up, the numeric parameter <STRONG>it</STRONG> is
+ given, showing the number of spaces the tabs are set to.
+
+ The <STRONG>it</STRONG> capability is normally used by the <STRONG>tset</STRONG> command to determine
+ whether to set the mode for hardware tab expansion, and whether to
+ set the tab stops. If the terminal has tab stops that can be saved
+ in non-volatile memory, the terminfo description can assume that
+ they are properly set.
+
+ Other capabilities include
+
+ <STRONG>o</STRONG> <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and <STRONG>is3</STRONG>, initialization strings for the terminal,
+
+ <STRONG>o</STRONG> <STRONG>iprog</STRONG>, the path name of a program to be run to initialize the ter-
+ minal,
+
+ <STRONG>o</STRONG> and <STRONG>if</STRONG>, the name of a file containing long initialization strings.
+
+ These strings are expected to set the terminal into modes consistent
+ with the rest of the terminfo description. They are normally sent to
+ the terminal, by the <EM>init</EM> option of the <STRONG>tput</STRONG> program, each time the
+ user logs in. They will be printed in the following order:
run the program
<STRONG>iprog</STRONG>
- output <STRONG>is1</STRONG> <STRONG>is2</STRONG>
+ output
+ <STRONG>is1</STRONG> and
+ <STRONG>is2</STRONG>
set the margins using
- <STRONG>mgc</STRONG>, <STRONG>smgl</STRONG> and <STRONG>smgr</STRONG>
+ <STRONG>mgc</STRONG> or
+ <STRONG>smglp</STRONG> and <STRONG>smgrp</STRONG> or
+ <STRONG>smgl</STRONG> and <STRONG>smgr</STRONG>
set tabs using
<STRONG>tbc</STRONG> and <STRONG>hts</STRONG>
print the file
<STRONG>if</STRONG>
- and finally
- output <STRONG>is3</STRONG>.
+ and finally output
+ <STRONG>is3</STRONG>.
Most initialization is done with <STRONG>is2</STRONG>. Special terminal modes can be
set up without duplicating strings by putting the common sequences in
A set of sequences that does a harder reset from a totally unknown
state can be given as <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rf</STRONG> and <STRONG>rs3</STRONG>, analogous to <STRONG>is1</STRONG> <STRONG>,</STRONG> <STRONG>is2</STRONG> <STRONG>,</STRONG> <STRONG>if</STRONG>
- and <STRONG>is3</STRONG> respectively. These strings are output by the <STRONG>reset</STRONG> program,
- which is used when the terminal gets into a wedged state. Commands are
- normally placed in <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they produce annoying
- effects on the screen and are not necessary when logging in. For exam-
- ple, the command to set the vt100 into 80-column mode would normally be
- part of <STRONG>is2</STRONG>, but it causes an annoying glitch of the screen and is not
- normally needed since the terminal is usually already in 80 column
- mode.
+ and <STRONG>is3</STRONG> respectively. These strings are output by <EM>reset</EM> option of
+ <STRONG>tput</STRONG>, or by the <STRONG>reset</STRONG> program (an alias of <STRONG>tset</STRONG>), which is used when
+ the terminal gets into a wedged state. Commands are normally placed in
+ <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they produce annoying effects on the screen
+ and are not necessary when logging in. For example, the command to set
+ the vt100 into 80-column mode would normally be part of <STRONG>is2</STRONG>, but it
+ causes an annoying glitch of the screen and is not normally needed
+ since the terminal is usually already in 80-column mode.
The <STRONG>reset</STRONG> program writes strings including <STRONG>iprog</STRONG>, etc., in the same
order as the <EM>init</EM> program, using <STRONG>rs1</STRONG>, etc., instead of <STRONG>is1</STRONG>, etc. If
of every row). If a more complex sequence is needed to set the tabs
than can be described by this, the sequence can be placed in <STRONG>is2</STRONG> or <STRONG>if</STRONG>.
+ The <STRONG>tput</STRONG> <STRONG>reset</STRONG> command uses the same capability strings as the <STRONG>reset</STRONG>
+ command, although the two programs (<STRONG>tput</STRONG> and <STRONG>reset</STRONG>) provide different
+ command-line options.
+
+ In practice, these terminfo capabilities are not often used in initial-
+ ization of tabs (though they are required for the <STRONG>tabs</STRONG> program):
+
+ <STRONG>o</STRONG> Almost all hardware terminals (at least those which supported tabs)
+ initialized those to every <EM>eight</EM> columns:
+
+ The only exception was the AT&T 2300 series, which set tabs to
+ every <EM>five</EM> columns.
+
+ <STRONG>o</STRONG> In particular, developers of the hardware terminals which are com-
+ monly used as models for modern terminal emulators provided docu-
+ mentation demonstrating that <EM>eight</EM> columns were the standard.
+
+ <STRONG>o</STRONG> Because of this, the terminal initialization programs <STRONG>tput</STRONG> and <STRONG>tset</STRONG>
+ use the <STRONG>tbc</STRONG> (<STRONG>clear_all_tabs</STRONG>) and <STRONG>hts</STRONG> (<STRONG>set_tab</STRONG>) capabilities
+ directly only when the <STRONG>it</STRONG> (<STRONG>init_tabs</STRONG>) capability is set to a value
+ other than <EM>eight</EM>.
+
</PRE><H3><a name="h3-Delays-and-Padding">Delays and Padding</a></H3><PRE>
Many older and slower terminals do not support either XON/XOFF or DTR
4410v1 added. This alternate character set may be specified by the
<STRONG>acsc</STRONG> capability.
- <STRONG>Glyph</STRONG> <STRONG>ACS</STRONG> <STRONG>Ascii</STRONG> <STRONG>acsc</STRONG> <STRONG>acsc</STRONG>
- <STRONG>Name</STRONG> <STRONG>Name</STRONG> <STRONG>Default</STRONG> <STRONG>Char</STRONG> <STRONG>Value</STRONG>
- ------------------------------------------------------------------------
- arrow pointing right ACS_RARROW > + 0x2b
- arrow pointing left ACS_LARROW < , 0x2c
- arrow pointing up ACS_UARROW ^ - 0x2d
- arrow pointing down ACS_DARROW v . 0x2e
- solid square block ACS_BLOCK # 0 0x30
- diamond ACS_DIAMOND + ` 0x60
- checker board (stipple) ACS_CKBOARD : a 0x61
- degree symbol ACS_DEGREE \ f 0x66
- plus/minus ACS_PLMINUS # g 0x67
- board of squares ACS_BOARD # h 0x68
-
- lantern symbol ACS_LANTERN # i 0x69
- lower right corner ACS_LRCORNER + j 0x6a
- upper right corner ACS_URCORNER + k 0x6b
- upper left corner ACS_ULCORNER + l 0x6c
- lower left corner ACS_LLCORNER + m 0x6d
- large plus or crossover ACS_PLUS + n 0x6e
- scan line 1 ACS_S1 ~ o 0x6f
- scan line 3 ACS_S3 - p 0x70
- horizontal line ACS_HLINE - q 0x71
- scan line 7 ACS_S7 - r 0x72
- scan line 9 ACS_S9 _ s 0x73
- tee pointing right ACS_LTEE + t 0x74
- tee pointing left ACS_RTEE + u 0x75
- tee pointing up ACS_BTEE + v 0x76
- tee pointing down ACS_TTEE + w 0x77
- vertical line ACS_VLINE | x 0x78
- less-than-or-equal-to ACS_LEQUAL < y 0x79
- greater-than-or-equal-to ACS_GEQUAL > z 0x7a
- greek pi ACS_PI * { 0x7b
- not-equal ACS_NEQUAL ! | 0x7c
- UK pound sign ACS_STERLING f } 0x7d
- bullet ACS_BULLET o ~ 0x7e
+ <STRONG>Glyph</STRONG> <STRONG>ACS</STRONG> <STRONG>Ascii</STRONG> <STRONG>acsc</STRONG> <STRONG>acsc</STRONG>
+ <STRONG>Name</STRONG> <STRONG>Name</STRONG> <STRONG>Default</STRONG> <STRONG>Char</STRONG> <STRONG>Value</STRONG>
+ --------------------------------------------------------------------
+ arrow pointing right ACS_RARROW > + 0x2b
+ arrow pointing left ACS_LARROW < , 0x2c
+ arrow pointing up ACS_UARROW ^ - 0x2d
+ arrow pointing down ACS_DARROW v . 0x2e
+ solid square block ACS_BLOCK # 0 0x30
+ diamond ACS_DIAMOND + ` 0x60
+ checker board (stipple) ACS_CKBOARD : a 0x61
+ degree symbol ACS_DEGREE \ f 0x66
+ plus/minus ACS_PLMINUS # g 0x67
+ board of squares ACS_BOARD # h 0x68
+ lantern symbol ACS_LANTERN # i 0x69
+ lower right corner ACS_LRCORNER + j 0x6a
+ upper right corner ACS_URCORNER + k 0x6b
+ upper left corner ACS_ULCORNER + l 0x6c
+ lower left corner ACS_LLCORNER + m 0x6d
+ large plus or crossover ACS_PLUS + n 0x6e
+ scan line 1 ACS_S1 ~ o 0x6f
+ scan line 3 ACS_S3 - p 0x70
+ horizontal line ACS_HLINE - q 0x71
+ scan line 7 ACS_S7 - r 0x72
+ scan line 9 ACS_S9 _ s 0x73
+ tee pointing right ACS_LTEE + t 0x74
+ tee pointing left ACS_RTEE + u 0x75
+ tee pointing up ACS_BTEE + v 0x76
+ tee pointing down ACS_TTEE + w 0x77
+ vertical line ACS_VLINE | x 0x78
+ less-than-or-equal-to ACS_LEQUAL < y 0x79
+ greater-than-or-equal-to ACS_GEQUAL > z 0x7a
+ greek pi ACS_PI * { 0x7b
+ not-equal ACS_NEQUAL ! | 0x7c
+ UK pound sign ACS_STERLING f } 0x7d
+ bullet ACS_BULLET o ~ 0x7e
A few notes apply to the table itself:
attributes not to be used when colors are enabled. The correspondence
with the attributes understood by <STRONG>curses</STRONG> is as follows:
- <STRONG>Attribute</STRONG> <STRONG>Bit</STRONG> <STRONG>Decimal</STRONG> <STRONG>Set</STRONG> <STRONG>by</STRONG>
- A_STANDOUT 0 1 sgr
- A_UNDERLINE 1 2 sgr
- A_REVERSE 2 4 sgr
- A_BLINK 3 8 sgr
- A_DIM 4 16 sgr
- A_BOLD 5 32 sgr
- A_INVIS 6 64 sgr
- A_PROTECT 7 128 sgr
- A_ALTCHARSET 8 256 sgr
- A_HORIZONTAL 9 512 sgr1
- A_LEFT 10 1024 sgr1
- A_LOW 11 2048 sgr1
- A_RIGHT 12 4096 sgr1
- A_TOP 13 8192 sgr1
- A_VERTICAL 14 16384 sgr1
- A_ITALIC 15 32768 sitm
+ <STRONG>Attribute</STRONG> <STRONG>Bit</STRONG> <STRONG>Decimal</STRONG> <STRONG>Set</STRONG> <STRONG>by</STRONG>
+ A_STANDOUT 0 1 sgr
+ A_UNDERLINE 1 2 sgr
+ A_REVERSE 2 4 sgr
+ A_BLINK 3 8 sgr
+ A_DIM 4 16 sgr
+ A_BOLD 5 32 sgr
+ A_INVIS 6 64 sgr
+ A_PROTECT 7 128 sgr
+
+ A_ALTCHARSET 8 256 sgr
+ A_HORIZONTAL 9 512 sgr1
+ A_LEFT 10 1024 sgr1
+ A_LOW 11 2048 sgr1
+ A_RIGHT 12 4096 sgr1
+ A_TOP 13 8192 sgr1
+ A_VERTICAL 14 16384 sgr1
+ A_ITALIC 15 32768 sitm
For example, on many IBM PC consoles, the underline attribute collides
with the foreground color blue and is not available in color mode.
with <STRONG>hu</STRONG> (half-line up) and <STRONG>hd</STRONG> (half-line down). This is primarily use-
ful for superscripts and subscripts on hard-copy terminals. If a hard-
copy terminal can eject to the next page (form feed), give this as <STRONG>ff</STRONG>
- (usually control L).
+ (usually control/L).
If there is a command to repeat a given character a given number of
times (to save time transmitting a large number of identical charac-
ncurses implementation ignores this glitch.
The Beehive Superbee, which is unable to correctly transmit the escape
- or control C characters, has <STRONG>xsb</STRONG>, indicating that the f1 key is used
- for escape and f2 for control C. (Only certain Superbees have this
+ or control/C characters, has <STRONG>xsb</STRONG>, indicating that the f1 key is used
+ for escape and f2 for control/C. (Only certain Superbees have this
problem, depending on the ROM.) Note that in older terminfo versions,
this capability was called "beehive_glitch"; it is now "no_esc_ctl_c".
</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
- <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>, <STRONG>printf(3)</STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
- <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>. <STRONG><A HREF="user_caps.5.html">user_caps(5)</A></STRONG>.
+ <STRONG><A HREF="tabs.1.html">tabs(1)</A></STRONG>, <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>, <STRONG>curs_vari-</STRONG>
+ <STRONG><A HREF="curs_variables.3x.html">ables(3x)</A></STRONG>, <STRONG>printf(3)</STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>. <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>. <STRONG><A HREF="user_caps.5.html">user_caps(5)</A></STRONG>.
</PRE><H2><a name="h2-AUTHORS">AUTHORS</a></H2><PRE>