* Note: this must be run through tbl before nroff.
* The magic cookie on the first line triggers this under some man programs.
****************************************************************************
- * Copyright (c) 1998-2004,2006 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2009,2010 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: terminfo.head,v 1.15 2006/12/24 18:04:42 tom Exp @
+ * @Id: terminfo.head,v 1.18 2010/07/31 16:08:48 tom Exp @
* Head of terminfo man page ends here
- * @Id: terminfo.tail,v 1.47 2006/12/24 18:14:22 tom Exp @
+ * @Id: terminfo.tail,v 1.55 2011/12/17 23:19:59 tom Exp @
* Beginning of terminfo.tail file
* This file is part of ncurses.
* See "terminfo.head" for copyright.
nals by giving a set of capabilities which they have, by
specifying how to perform screen operations, and by speci-
fying padding requirements and initialization sequences.
- This describes <STRONG>ncurses</STRONG> version 5.6 (patch 20070303).
+ This describes <STRONG>ncurses</STRONG> version 5.9 (patch 20120107).
Entries in <EM>terminfo</EM> consist of a sequence of `,' separated
fields (embedded commas may be escaped with a backslash or
bottom margins to
#1, #2
- The XSI Curses standard added these. They are some
- post-4.1 versions of System V curses, e.g., Solaris 2.5
- and IRIX 6.x. The <STRONG>ncurses</STRONG> termcap names for them are
- invented; according to the XSI Curses standard, they have
- no termcap names. If your compiled terminfo entries use
- these, they may not be binary-compatible with System V
- terminfo entries after SVr4.1; beware!
+ The XSI Curses standard added these hardcopy capabili-
+ ties. They were used in some post-4.1 versions of System
+ V curses, e.g., Solaris 2.5 and IRIX 6.x. Except for <STRONG>YI</STRONG>,
+ the <STRONG>ncurses</STRONG> termcap names for them are invented. Accord-
+ ing to the XSI Curses standard, they have no termcap
+ names. If your compiled terminfo entries use these, they
+ may not be binary-compatible with System V terminfo
+ entries after SVr4.1; beware!
<STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
set_a_attributes sgr1 sA Define second set of
video attributes
#1-#6
- set_pglen_inch slengthsL YI Set page length
- to #1 hundredth of
- an inch
+ set_pglen_inch slengthYI Set page length to
+ #1 hundredth of an
+ inch (some implemen-
+ tations use sL for
+ termcap).
<STRONG>A</STRONG> <STRONG>Sample</STRONG> <STRONG>Entry</STRONG>
The following entry, describing an ANSI-standard terminal,
- is representative of what a <STRONG>terminfo</STRONG> entry for a modern
+ is representative of what a <STRONG>terminfo</STRONG> entry for a modern
terminal typically looks like.
ansi|ansi/pc-term compatible with color,
sgr0=\E[0;10m, tbc=\E[2g, u6=\E[%d;%dR, u7=\E[6n,
u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%p1%dd,
- Entries may continue onto multiple lines by placing white
- space at the beginning of each line except the first.
- Comments may be included on lines beginning with ``#''.
+ Entries may continue onto multiple lines by placing white
+ space at the beginning of each line except the first.
+ Comments may be included on lines beginning with ``#''.
Capabilities in <EM>terminfo</EM> are of three types: Boolean capa-
bilities which indicate that the terminal has some partic-
- ular feature, numeric capabilities giving the size of the
- terminal or the size of particular delays, and string
- capabilities, which give a sequence which can be used to
+ ular feature, numeric capabilities giving the size of the
+ terminal or the size of particular delays, and string
+ capabilities, which give a sequence which can be used to
perform particular terminal operations.
<STRONG>Types</STRONG> <STRONG>of</STRONG> <STRONG>Capabilities</STRONG>
- All capabilities have names. For instance, the fact that
- ANSI-standard terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an
- automatic return and line-feed when the end of a line is
- reached) is indicated by the capability <STRONG>am</STRONG>. Hence the
+ All capabilities have names. For instance, the fact that
+ ANSI-standard terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an
+ automatic return and line-feed when the end of a line is
+ reached) is indicated by the capability <STRONG>am</STRONG>. Hence the
description of ansi includes <STRONG>am</STRONG>. Numeric capabilities are
- followed by the character `#' and then a positive value.
- Thus <STRONG>cols</STRONG>, which indicates the number of columns the ter-
- minal has, gives the value `80' for ansi. Values for
+ followed by the character `#' and then a positive value.
+ Thus <STRONG>cols</STRONG>, which indicates the number of columns the ter-
+ minal has, gives the value `80' for ansi. Values for
numeric capabilities may be specified in decimal, octal or
- hexadecimal, using the C programming language conventions
+ hexadecimal, using the C programming language conventions
(e.g., 255, 0377 and 0xff or 0xFF).
- Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to
+ Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to
end of line sequence) are given by the two-character code,
- an `=', and then a string ending at the next following
+ an `=', and then a string ending at the next following
`,'.
- A number of escape sequences are provided in the string
+ A number of escape sequences are provided in the string
valued capabilities for easy encoding of characters there.
- Both <STRONG>\E</STRONG> and <STRONG>\e</STRONG> map to an ESCAPE character, <STRONG>^x</STRONG> maps to a
- control-x for any appropriate x, and the sequences <STRONG>\n</STRONG> <STRONG>\l</STRONG>
- <STRONG>\r</STRONG> <STRONG>\t</STRONG> <STRONG>\b</STRONG> <STRONG>\f</STRONG> <STRONG>\s</STRONG> give a newline, line-feed, return, tab,
+ Both <STRONG>\E</STRONG> and <STRONG>\e</STRONG> map to an ESCAPE character, <STRONG>^x</STRONG> maps to a
+ control-x for any appropriate x, and the sequences <STRONG>\n</STRONG> <STRONG>\l</STRONG>
+ <STRONG>\r</STRONG> <STRONG>\t</STRONG> <STRONG>\b</STRONG> <STRONG>\f</STRONG> <STRONG>\s</STRONG> give a newline, line-feed, return, tab,
backspace, form-feed, and space. Other escapes include <STRONG>\^</STRONG>
- for <STRONG>^</STRONG>, <STRONG>\\</STRONG> for <STRONG>\</STRONG>, <STRONG>\</STRONG>, for comma, <STRONG>\:</STRONG> for <STRONG>:</STRONG>, and <STRONG>\0</STRONG> for null.
- (<STRONG>\0</STRONG> will produce \200, which does not terminate a string
+ for <STRONG>^</STRONG>, <STRONG>\\</STRONG> for <STRONG>\</STRONG>, <STRONG>\</STRONG>, for comma, <STRONG>\:</STRONG> for <STRONG>:</STRONG>, and <STRONG>\0</STRONG> for null.
+ (<STRONG>\0</STRONG> will produce \200, which does not terminate a string
but behaves as a null character on most terminals, provid-
- ing CS7 is specified. See <STRONG><A HREF="stty.1.html">stty(1)</A></STRONG>.) Finally, characters
+ ing CS7 is specified. See <STRONG><A HREF="stty.1.html">stty(1)</A></STRONG>.) Finally, characters
may be given as three octal digits after a <STRONG>\</STRONG>.
- A delay in milliseconds may appear anywhere in a string
- capability, enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>,
- and padding characters are supplied by <EM>tputs</EM> to provide
- this delay. The delay must be a number with at most one
+ A delay in milliseconds may appear anywhere in a string
+ capability, enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>,
+ and padding characters are supplied by <EM>tputs</EM> to provide
+ this delay. The delay must be a number with at most one
decimal place of precision; it may be followed by suffixes
- `*' or '/' or both. A `*' indicates that the padding
- required is proportional to the number of lines affected
- by the operation, and the amount given is the per-
- affected-unit padding required. (In the case of insert
+ `*' or '/' or both. A `*' indicates that the padding
+ required is proportional to the number of lines affected
+ by the operation, and the amount given is the per-
+ affected-unit padding required. (In the case of insert
character, the factor is still the number of <EM>lines</EM>
- affected.) Normally, padding is advisory if the device
- has the <STRONG>xon</STRONG> capability; it is used for cost computation
- but does not trigger delays. A `/' suffix indicates that
- the padding is mandatory and forces a delay of the given
- number of milliseconds even on devices for which <STRONG>xon</STRONG> is
+ affected.) Normally, padding is advisory if the device
+ has the <STRONG>xon</STRONG> capability; it is used for cost computation
+ but does not trigger delays. A `/' suffix indicates that
+ the padding is mandatory and forces a delay of the given
+ number of milliseconds even on devices for which <STRONG>xon</STRONG> is
present to indicate flow control.
- Sometimes individual capabilities must be commented out.
- To do this, put a period before the capability name. For
+ Sometimes individual capabilities must be commented out.
+ To do this, put a period before the capability name. For
example, see the second <STRONG>ind</STRONG> in the example above.
<STRONG>Fetching</STRONG> <STRONG>Compiled</STRONG> <STRONG>Descriptions</STRONG>
- If the environment variable TERMINFO is set, it is inter-
- preted as the pathname of a directory containing the com-
+ If the environment variable TERMINFO is set, it is inter-
+ preted as the pathname of a directory containing the com-
piled description you are working on. Only that directory
is searched.
- If TERMINFO is not set, the <STRONG>ncurses</STRONG> version of the ter-
- minfo reader code will instead look in the directory
- <STRONG>$HOME/.terminfo</STRONG> for a compiled description. If it fails
- to find one there, and the environment variable TER-
- MINFO_DIRS is set, it will interpret the contents of that
- variable as a list of colon- separated directories to be
- searched (an empty entry is interpreted as a command to
- search <EM>/usr/share/terminfo</EM>). If no description is found
- in any of the TERMINFO_DIRS directories, the fetch fails.
-
- If neither TERMINFO nor TERMINFO_DIRS is set, the last
- place tried will be the system terminfo directory,
+ If TERMINFO is not set, the <STRONG>ncurses</STRONG> version of the ter-
+ minfo reader code will instead look in the directory
+ <STRONG>$HOME/.terminfo</STRONG> for a compiled description. If it fails
+ to find one there, and the environment variable TER-
+ MINFO_DIRS is set, it will interpret the contents of that
+ variable as a list of colon- separated directories (or
+ database files) to be searched (an empty entry is inter-
+ preted as a command to search <EM>/usr/share/terminfo</EM>). If no
+ description is found in any of the TERMINFO_DIRS directo-
+ ries, the fetch fails.
+
+ If neither TERMINFO nor TERMINFO_DIRS is set, the last
+ place tried will be the system terminfo directory,
<EM>/usr/share/terminfo</EM>.
- (Neither the <STRONG>$HOME/.terminfo</STRONG> lookups nor TERMINFO_DIRS
- extensions are supported under stock System V ter-
+ (Neither the <STRONG>$HOME/.terminfo</STRONG> lookups nor TERMINFO_DIRS
+ extensions are supported under stock System V ter-
minfo/curses.)
<STRONG>Preparing</STRONG> <STRONG>Descriptions</STRONG>
- We now outline how to prepare descriptions of terminals.
- The most effective way to prepare a terminal description
- is by imitating the description of a similar terminal in
- <EM>terminfo</EM> and to build up a description gradually, using
+ We now outline how to prepare descriptions of terminals.
+ The most effective way to prepare a terminal description
+ is by imitating the description of a similar terminal in
+ <EM>terminfo</EM> and to build up a description gradually, using
partial descriptions with <EM>vi</EM> or some other screen-oriented
- program to check that they are correct. Be aware that a
+ program to check that they are correct. Be aware that a
very unusual terminal may expose deficiencies in the abil-
- ity of the <EM>terminfo</EM> file to describe it or bugs in the
+ ity of the <EM>terminfo</EM> file to describe it or bugs in the
screen-handling code of the test program.
- To get the padding for insert line right (if the terminal
+ To get the padding for insert line right (if the terminal
manufacturer did not document it) a severe test is to edit
- a large file at 9600 baud, delete 16 or so lines from the
- middle of the screen, then hit the `u' key several times
- quickly. If the terminal messes up, more padding is usu-
- ally needed. A similar test can be used for insert char-
+ a large file at 9600 baud, delete 16 or so lines from the
+ middle of the screen, then hit the `u' key several times
+ quickly. If the terminal messes up, more padding is usu-
+ ally needed. A similar test can be used for insert char-
acter.
<STRONG>Basic</STRONG> <STRONG>Capabilities</STRONG>
- The number of columns on each line for the terminal is
- given by the <STRONG>cols</STRONG> numeric capability. If the terminal is
- a CRT, then the number of lines on the screen is given by
+ The number of columns on each line for the terminal is
+ given by the <STRONG>cols</STRONG> numeric capability. If the terminal is
+ a CRT, then the number of lines on the screen is given by
the <STRONG>lines</STRONG> capability. If the terminal wraps around to the
- beginning of the next line when it reaches the right mar-
+ beginning of the next line when it reaches the right mar-
gin, then it should have the <STRONG>am</STRONG> capability. If the termi-
- nal can clear its screen, leaving the cursor in the home
- position, then this is given by the <STRONG>clear</STRONG> string capabil-
- ity. If the terminal overstrikes (rather than clearing a
- position when a character is struck over) then it should
- have the <STRONG>os</STRONG> capability. If the terminal is a printing
- terminal, with no soft copy unit, give it both <STRONG>hc</STRONG> and <STRONG>os</STRONG>.
- (<STRONG>os</STRONG> applies to storage scope terminals, such as TEKTRONIX
- 4010 series, as well as hard copy and APL terminals.) If
+ nal can clear its screen, leaving the cursor in the home
+ position, then this is given by the <STRONG>clear</STRONG> string capabil-
+ ity. If the terminal overstrikes (rather than clearing a
+ position when a character is struck over) then it should
+ have the <STRONG>os</STRONG> capability. If the terminal is a printing
+ terminal, with no soft copy unit, give it both <STRONG>hc</STRONG> and <STRONG>os</STRONG>.
+ (<STRONG>os</STRONG> applies to storage scope terminals, such as TEKTRONIX
+ 4010 series, as well as hard copy and APL terminals.) If
there is a code to move the cursor to the left edge of the
current row, give this as <STRONG>cr</STRONG>. (Normally this will be car-
- riage return, control M.) If there is a code to produce
+ riage return, control M.) If there is a code to produce
an audible signal (bell, beep, etc) give this as <STRONG>bel</STRONG>.
- If there is a code to move the cursor one position to the
- left (such as backspace) that capability should be given
- as <STRONG>cub1</STRONG>. Similarly, codes to move to the right, up, and
+ If there is a code to move the cursor one position to the
+ left (such as backspace) that capability should be given
+ as <STRONG>cub1</STRONG>. Similarly, codes to move to the right, up, and
down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and <STRONG>cud1</STRONG>. These local
- cursor motions should not alter the text they pass over,
- for example, you would not normally use `<STRONG>cuf1</STRONG>= ' because
+ cursor motions should not alter the text they pass over,
+ for example, you would not normally use `<STRONG>cuf1</STRONG>= ' because
the space would erase the character moved over.
- A very important point here is that the local cursor
- motions encoded in <EM>terminfo</EM> are undefined at the left and
- top edges of a CRT terminal. Programs should never
- attempt to backspace around the left edge, unless <STRONG>bw</STRONG> is
+ A very important point here is that the local cursor
+ motions encoded in <EM>terminfo</EM> are undefined at the left and
+ top edges of a CRT terminal. Programs should never
+ attempt to backspace around the left edge, unless <STRONG>bw</STRONG> is
given, and never attempt to go up locally off the top. In
- order to scroll text up, a program will go to the bottom
+ order to scroll text up, a program will go to the bottom
left corner of the screen and send the <STRONG>ind</STRONG> (index) string.
To scroll text down, a program goes to the top left corner
- of the screen and sends the <STRONG>ri</STRONG> (reverse index) string.
- The strings <STRONG>ind</STRONG> and <STRONG>ri</STRONG> are undefined when not on their
+ of the screen and sends the <STRONG>ri</STRONG> (reverse index) string.
+ The strings <STRONG>ind</STRONG> and <STRONG>ri</STRONG> are undefined when not on their
respective corners of the screen.
Parameterized versions of the scrolling sequences are <STRONG>indn</STRONG>
and <STRONG>rin</STRONG> which have the same semantics as <STRONG>ind</STRONG> and <STRONG>ri</STRONG> except
- that they take one parameter, and scroll that many lines.
- They are also undefined except at the appropriate edge of
+ that they take one parameter, and scroll that many lines.
+ They are also undefined except at the appropriate edge of
the screen.
- The <STRONG>am</STRONG> capability tells whether the cursor sticks at the
- right edge of the screen when text is output, but this
+ The <STRONG>am</STRONG> capability tells whether the cursor sticks at the
+ right edge of the screen when text is output, but this
does not necessarily apply to a <STRONG>cuf1</STRONG> from the last column.
- The only local motion which is defined from the left edge
- is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from the left edge will
- move to the right edge of the previous row. If <STRONG>bw</STRONG> is not
- given, the effect is undefined. This is useful for draw-
- ing a box around the edge of the screen, for example. If
- the terminal has switch selectable automatic margins, the
- <EM>terminfo</EM> file usually assumes that this is on; i.e., <STRONG>am</STRONG>.
- If the terminal has a command which moves to the first
- column of the next line, that command can be given as <STRONG>nel</STRONG>
- (newline). It does not matter if the command clears the
- remainder of the current line, so if the terminal has no
- <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be possible to craft a working <STRONG>nel</STRONG>
+ The only local motion which is defined from the left edge
+ is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from the left edge will
+ move to the right edge of the previous row. If <STRONG>bw</STRONG> is not
+ given, the effect is undefined. This is useful for draw-
+ ing a box around the edge of the screen, for example. If
+ the terminal has switch selectable automatic margins, the
+ <EM>terminfo</EM> file usually assumes that this is on; i.e., <STRONG>am</STRONG>.
+ If the terminal has a command which moves to the first
+ column of the next line, that command can be given as <STRONG>nel</STRONG>
+ (newline). It does not matter if the command clears the
+ remainder of the current line, so if the terminal has no
+ <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be possible to craft a working <STRONG>nel</STRONG>
out of one or both of them.
These capabilities suffice to describe hard-copy and
- "glass-tty" terminals. Thus the model 33 teletype is
+ "glass-tty" terminals. Thus the model 33 teletype is
described as
33|tty33|tty|model 33 teletype,
<STRONG>Parameterized</STRONG> <STRONG>Strings</STRONG>
- Cursor addressing and other strings requiring parameters
- in the terminal are described by a parameterized string
- capability, with <STRONG><A HREF="printf.3.html">printf(3)</A></STRONG> like escapes <STRONG>%x</STRONG> in it. For
- example, to address the cursor, the <STRONG>cup</STRONG> capability is
+ Cursor addressing and other strings requiring parameters
+ in the terminal are described by a parameterized string
+ capability, with <STRONG><A HREF="printf.3.html">printf(3)</A></STRONG> like escapes <STRONG>%x</STRONG> in it. For
+ example, to address the cursor, the <STRONG>cup</STRONG> capability is
given, using two parameters: the row and column to address
to. (Rows and columns are numbered from zero and refer to
the physical screen visible to the user, not to any unseen
- memory.) If the terminal has memory relative cursor
+ memory.) If the terminal has memory relative cursor
addressing, that can be indicated by <STRONG>mrcup</STRONG>.
- The parameter mechanism uses a stack and special <STRONG>%</STRONG> codes
- to manipulate it. Typically a sequence will push one of
- the parameters onto the stack and then print it in some
- format. Print (e.g., "%d") is a special case. Other
- operations, including "%t" pop their operand from the
+ The parameter mechanism uses a stack and special <STRONG>%</STRONG> codes
+ to manipulate it. Typically a sequence will push one of
+ the parameters onto the stack and then print it in some
+ format. Print (e.g., "%d") is a special case. Other
+ operations, including "%t" pop their operand from the
stack. It is noted that more complex operations are often
necessary, e.g., in the <STRONG>sgr</STRONG> string.
%% outputs `%'
%<EM>[[</EM>:<EM>]flags][width[.precision]][</EM>doxXs<EM>]</EM>
- as in <STRONG>printf</STRONG>, flags are [-+#] and space
+ as in <STRONG>printf</STRONG>, flags are [-+#] and space. Use a `:'
+ to allow the next character to be a `-' flag, avoid-
+ ing interpreting "%-" as an operator.
%c print pop() like %c in <STRONG>printf</STRONG>
%g[A-Z]
get static variable [a-z] and push it
- The terms "static" and "dynamic" are misleading.
- Historically, these are simply two different sets of
- variables, whose values are not reset between calls
- to <STRONG>tparm</STRONG>. However, that fact is not documented in
- other implementations. Relying on it will adversely
+ The terms "static" and "dynamic" are misleading.
+ Historically, these are simply two different sets of
+ variables, whose values are not reset between calls
+ to <STRONG>tparm</STRONG>. However, that fact is not documented in
+ other implementations. Relying on it will adversely
impact portability to other implementations.
%'<EM>c</EM>' char constant <EM>c</EM>
logical AND and OR operations (for conditionals)
%! %~
- unary operations (logical and bit complement):
+ unary operations (logical and bit complement):
push(op pop())
%i add 1 to first two parameters (for ANSI terminals)
%? <EM>expr</EM> %t <EM>thenpart</EM> %e <EM>elsepart</EM> %;
- This forms an if-then-else. The %e <EM>elsepart</EM> is
- optional. Usually the %? <EM>expr</EM> part pushes a value
- onto the stack, and %t pops it from the stack, test-
- ing if it is nonzero (true). If it is zero (false),
+ This forms an if-then-else. The %e <EM>elsepart</EM> is
+ optional. Usually the %? <EM>expr</EM> part pushes a value
+ onto the stack, and %t pops it from the stack, test-
+ ing if it is nonzero (true). If it is zero (false),
control passes to the %e (else) part.
It is possible to form else-if's a la Algol 68:
where ci are conditions, bi are bodies.
Use the <STRONG>-f</STRONG> option of <STRONG>tic</STRONG> or <STRONG>infocmp</STRONG> to see the struc-
- ture of if-the-else's. Some strings, e.g., <STRONG>sgr</STRONG> can
+ ture of if-then-else's. Some strings, e.g., <STRONG>sgr</STRONG> can
be very complicated when written on one line. The <STRONG>-f</STRONG>
- option splits the string into lines with the parts
+ option splits the string into lines with the parts
indented.
Binary operations are in postfix form with the operands in
- the usual order. That is, to get x-5 one would use
- "%gx%{5}%-". %P and %g variables are persistent across
+ the usual order. That is, to get x-5 one would use
+ "%gx%{5}%-". %P and %g variables are persistent across
escape-string evaluations.
Consider the HP2645, which, to get to row 3 and column 12,
- needs to be sent \E&a12c03Y padded for 6 milliseconds.
- Note that the order of the rows and columns is inverted
- here, and that the row and column are printed as two dig-
+ needs to be sent \E&a12c03Y padded for 6 milliseconds.
+ Note that the order of the rows and columns is inverted
+ here, and that the row and column are printed as two dig-
its. Thus its <STRONG>cup</STRONG> capability is "cup=6\E&%p2%2dc%p1%2dY".
The Microterm ACT-IV needs the current row and column sent
- preceded by a <STRONG>^T</STRONG>, with the row and column simply encoded
- in binary, "cup=^T%p1%c%p2%c". Terminals which use "%c"
- need to be able to backspace the cursor (<STRONG>cub1</STRONG>), and to
+ preceded by a <STRONG>^T</STRONG>, with the row and column simply encoded
+ in binary, "cup=^T%p1%c%p2%c". Terminals which use "%c"
+ need to be able to backspace the cursor (<STRONG>cub1</STRONG>), and to
move the cursor up one line on the screen (<STRONG>cuu1</STRONG>). This is
- necessary because it is not always safe to transmit <STRONG>\n</STRONG> <STRONG>^D</STRONG>
- and <STRONG>\r</STRONG>, as the system may change or discard them. (The
- library routines dealing with terminfo set tty modes so
+ necessary because it is not always safe to transmit <STRONG>\n</STRONG> <STRONG>^D</STRONG>
+ and <STRONG>\r</STRONG>, as the system may change or discard them. (The
+ library routines dealing with terminfo set tty modes so
that tabs are never expanded, so \t is safe to send. This
turns out to be essential for the Ann Arbor 4080.)
A final example is the LSI ADM-3a, which uses row and col-
umn offset by a blank character, thus "cup=\E=%p1%'
- '%+%c%p2%' '%+%c". After sending `\E=', this pushes the
- first parameter, pushes the ASCII value for a space (32),
- adds them (pushing the sum on the stack in place of the
- two previous values) and outputs that value as a charac-
- ter. Then the same is done for the second parameter.
+ '%+%c%p2%' '%+%c". After sending `\E=', this pushes the
+ first parameter, pushes the ASCII value for a space (32),
+ adds them (pushing the sum on the stack in place of the
+ two previous values) and outputs that value as a charac-
+ ter. Then the same is done for the second parameter.
More complex arithmetic is possible using the stack.
<STRONG>Cursor</STRONG> <STRONG>Motions</STRONG>
If the terminal has a fast way to home the cursor (to very
- upper left corner of screen) then this can be given as
- <STRONG>home</STRONG>; similarly a fast way of getting to the lower left-
- hand corner can be given as <STRONG>ll</STRONG>; this may involve going up
- with <STRONG>cuu1</STRONG> from the home position, but a program should
- never do this itself (unless <STRONG>ll</STRONG> does) because it can make
- no assumption about the effect of moving up from the home
- position. Note that the home position is the same as
+ upper left corner of screen) then this can be given as
+ <STRONG>home</STRONG>; similarly a fast way of getting to the lower left-
+ hand corner can be given as <STRONG>ll</STRONG>; this may involve going up
+ with <STRONG>cuu1</STRONG> from the home position, but a program should
+ never do this itself (unless <STRONG>ll</STRONG> does) because it can make
+ no assumption about the effect of moving up from the home
+ position. Note that the home position is the same as
addressing to (0,0): to the top left corner of the screen,
- not of memory. (Thus, the \EH sequence on HP terminals
+ not of memory. (Thus, the \EH sequence on HP terminals
cannot be used for <STRONG>home</STRONG>.)
If the terminal has row or column absolute cursor address-
- ing, these can be given as single parameter capabilities
+ ing, these can be given as single parameter capabilities
<STRONG>hpa</STRONG> (horizontal position absolute) and <STRONG>vpa</STRONG> (vertical posi-
tion absolute). Sometimes these are shorter than the more
- general two parameter sequence (as with the hp2645) and
+ general two parameter sequence (as with the hp2645) and
can be used in preference to <STRONG>cup</STRONG>. If there are parameter-
- ized local motions (e.g., move <EM>n</EM> spaces to the right)
+ ized local motions (e.g., move <EM>n</EM> spaces to the right)
these can be given as <STRONG>cud</STRONG>, <STRONG>cub</STRONG>, <STRONG>cuf</STRONG>, and <STRONG>cuu</STRONG> with a single
- parameter indicating how many spaces to move. These are
- primarily useful if the terminal does not have <STRONG>cup</STRONG>, such
+ parameter indicating how many spaces to move. These are
+ primarily useful if the terminal does not have <STRONG>cup</STRONG>, such
as the TEKTRONIX 4025.
If the terminal needs to be in a special mode when running
a program that uses these capabilities, the codes to enter
- and exit this mode can be given as <STRONG>smcup</STRONG> and <STRONG>rmcup</STRONG>. This
- arises, for example, from terminals like the Concept with
- more than one page of memory. If the terminal has only
- memory relative cursor addressing and not screen relative
+ and exit this mode can be given as <STRONG>smcup</STRONG> and <STRONG>rmcup</STRONG>. This
+ arises, for example, from terminals like the Concept with
+ more than one page of memory. If the terminal has only
+ memory relative cursor addressing and not screen relative
cursor addressing, a one screen-sized window must be fixed
- into the terminal for cursor addressing to work properly.
+ into the terminal for cursor addressing to work properly.
This is also used for the TEKTRONIX 4025, where <STRONG>smcup</STRONG> sets
- the command character to be the one used by terminfo. If
- the <STRONG>smcup</STRONG> sequence will not restore the screen after an
+ the command character to be the one used by terminfo. If
+ the <STRONG>smcup</STRONG> sequence will not restore the screen after an
<STRONG>rmcup</STRONG> sequence is output (to the state prior to outputting
<STRONG>rmcup</STRONG>), specify <STRONG>nrrmc</STRONG>.
<STRONG>Area</STRONG> <STRONG>Clears</STRONG>
If the terminal can clear from the current position to the
- end of the line, leaving the cursor where it is, this
+ end of the line, leaving the cursor where it is, this
should be given as <STRONG>el</STRONG>. If the terminal can clear from the
- beginning of the line to the current position inclusive,
- leaving the cursor where it is, this should be given as
- <STRONG>el1</STRONG>. If the terminal can clear from the current position
- to the end of the display, then this should be given as
- <STRONG>ed</STRONG>. <STRONG>Ed</STRONG> is only defined from the first column of a line.
- (Thus, it can be simulated by a request to delete a large
+ beginning of the line to the current position inclusive,
+ leaving the cursor where it is, this should be given as
+ <STRONG>el1</STRONG>. If the terminal can clear from the current position
+ to the end of the display, then this should be given as
+ <STRONG>ed</STRONG>. <STRONG>Ed</STRONG> is only defined from the first column of a line.
+ (Thus, it can be simulated by a request to delete a large
number of lines, if a true <STRONG>ed</STRONG> is not available.)
<STRONG>Insert/delete</STRONG> <STRONG>line</STRONG> <STRONG>and</STRONG> <STRONG>vertical</STRONG> <STRONG>motions</STRONG>
- If the terminal can open a new blank line before the line
- where the cursor is, this should be given as <STRONG>il1</STRONG>; this is
- done only from the first position of a line. The cursor
+ If the terminal can open a new blank line before the line
+ where the cursor is, this should be given as <STRONG>il1</STRONG>; this is
+ done only from the first position of a line. The cursor
must then appear on the newly blank line. If the terminal
- can delete the line which the cursor is on, then this
- should be given as <STRONG>dl1</STRONG>; this is done only from the first
- position on the line to be deleted. Versions of <STRONG>il1</STRONG> and
- <STRONG>dl1</STRONG> which take a single parameter and insert or delete
+ can delete the line which the cursor is on, then this
+ should be given as <STRONG>dl1</STRONG>; this is done only from the first
+ position on the line to be deleted. Versions of <STRONG>il1</STRONG> and
+ <STRONG>dl1</STRONG> which take a single parameter and insert or delete
that many lines can be given as <STRONG>il</STRONG> and <STRONG>dl</STRONG>.
- If the terminal has a settable scrolling region (like the
- vt100) the command to set this can be described with the
- <STRONG>csr</STRONG> capability, which takes two parameters: the top and
+ If the terminal has a settable scrolling region (like the
+ vt100) the command to set this can be described with the
+ <STRONG>csr</STRONG> capability, which takes two parameters: the top and
bottom lines of the scrolling region. The cursor position
is, alas, undefined after using this command.
- It is possible to get the effect of insert or delete line
+ It is possible to get the effect of insert or delete line
using <STRONG>csr</STRONG> on a properly chosen region; the <STRONG>sc</STRONG> and <STRONG>rc</STRONG> (save
- and restore cursor) commands may be useful for ensuring
- that your synthesized insert/delete string does not move
- the cursor. (Note that the <STRONG><A HREF="ncurses.3x.html">ncurses(3x)</A></STRONG> library does this
- synthesis automatically, so you need not compose
+ and restore cursor) commands may be useful for ensuring
+ that your synthesized insert/delete string does not move
+ the cursor. (Note that the <STRONG><A HREF="ncurses.3x.html">ncurses(3x)</A></STRONG> library does this
+ synthesis automatically, so you need not compose
insert/delete strings for an entry with <STRONG>csr</STRONG>).
Yet another way to construct insert and delete might be to
- use a combination of index with the memory-lock feature
- found on some terminals (like the HP-700/90 series, which
+ use a combination of index with the memory-lock feature
+ found on some terminals (like the HP-700/90 series, which
however also has insert/delete).
- Inserting lines at the top or bottom of the screen can
- also be done using <STRONG>ri</STRONG> or <STRONG>ind</STRONG> on many terminals without a
- true insert/delete line, and is often faster even on ter-
+ Inserting lines at the top or bottom of the screen can
+ also be done using <STRONG>ri</STRONG> or <STRONG>ind</STRONG> on many terminals without a
+ true insert/delete line, and is often faster even on ter-
minals with those features.
- The boolean <STRONG>non_dest_scroll_region</STRONG> should be set if each
- scrolling window is effectively a view port on a screen-
- sized canvas. To test for this capability, create a
- scrolling region in the middle of the screen, write some-
- thing to the bottom line, move the cursor to the top of
+ The boolean <STRONG>non_dest_scroll_region</STRONG> should be set if each
+ scrolling window is effectively a view port on a screen-
+ sized canvas. To test for this capability, create a
+ scrolling region in the middle of the screen, write some-
+ thing to the bottom line, move the cursor to the top of
the region, and do <STRONG>ri</STRONG> followed by <STRONG>dl1</STRONG> or <STRONG>ind</STRONG>. If the data
- scrolled off the bottom of the region by the <STRONG>ri</STRONG> re-
- appears, then scrolling is non-destructive. System V and
- XSI Curses expect that <STRONG>ind</STRONG>, <STRONG>ri</STRONG>, <STRONG>indn</STRONG>, and <STRONG>rin</STRONG> will simu-
- late destructive scrolling; their documentation cautions
- you not to define <STRONG>csr</STRONG> unless this is true. This <STRONG>curses</STRONG>
+ scrolled off the bottom of the region by the <STRONG>ri</STRONG> re-
+ appears, then scrolling is non-destructive. System V and
+ XSI Curses expect that <STRONG>ind</STRONG>, <STRONG>ri</STRONG>, <STRONG>indn</STRONG>, and <STRONG>rin</STRONG> will simu-
+ late destructive scrolling; their documentation cautions
+ you not to define <STRONG>csr</STRONG> unless this is true. This <STRONG>curses</STRONG>
implementation is more liberal and will do explicit erases
after scrolling if <STRONG>ndstr</STRONG> is defined.
If the terminal has the ability to define a window as part
- of memory, which all commands affect, it should be given
+ of memory, which all commands affect, it should be given
as the parameterized string <STRONG>wind</STRONG>. The four parameters are
- the starting and ending lines in memory and the starting
+ the starting and ending lines in memory and the starting
and ending columns in memory, in that order.
- If the terminal can retain display memory above, then the
- <STRONG>da</STRONG> capability should be given; if display memory can be
- retained below, then <STRONG>db</STRONG> should be given. These indicate
- that deleting a line or scrolling may bring non-blank
- lines up from below or that scrolling back with <STRONG>ri</STRONG> may
+ If the terminal can retain display memory above, then the
+ <STRONG>da</STRONG> capability should be given; if display memory can be
+ retained below, then <STRONG>db</STRONG> should be given. These indicate
+ that deleting a line or scrolling may bring non-blank
+ lines up from below or that scrolling back with <STRONG>ri</STRONG> may
bring down non-blank lines.
<STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
- There are two basic kinds of intelligent terminals with
- respect to insert/delete character which can be described
- using <EM>terminfo.</EM> The most common insert/delete character
- operations affect only the characters on the current line
- and shift characters off the end of the line rigidly.
- Other terminals, such as the Concept 100 and the Perkin
- Elmer Owl, make a distinction between typed and untyped
- blanks on the screen, shifting upon an insert or delete
- only to an untyped blank on the screen which is either
- eliminated, or expanded to two untyped blanks. You can
- determine the kind of terminal you have by clearing the
- screen and then typing text separated by cursor motions.
- Type "abc def" using local cursor motions (not spaces)
+ There are two basic kinds of intelligent terminals with
+ respect to insert/delete character which can be described
+ using <EM>terminfo.</EM> The most common insert/delete character
+ operations affect only the characters on the current line
+ and shift characters off the end of the line rigidly.
+ Other terminals, such as the Concept 100 and the Perkin
+ Elmer Owl, make a distinction between typed and untyped
+ blanks on the screen, shifting upon an insert or delete
+ only to an untyped blank on the screen which is either
+ eliminated, or expanded to two untyped blanks. You can
+ determine the kind of terminal you have by clearing the
+ screen and then typing text separated by cursor motions.
+ Type "abc def" using local cursor motions (not spaces)
between the "abc" and the "def". Then position the cursor
- before the "abc" and put the terminal in insert mode. If
- typing characters causes the rest of the line to shift
+ before the "abc" and put the terminal in insert mode. If
+ typing characters causes the rest of the line to shift
rigidly and characters to fall off the end, then your ter-
- minal does not distinguish between blanks and untyped
- positions. If the "abc" shifts over to the "def" which
- then move together around the end of the current line and
- onto the next as you insert, you have the second type of
- terminal, and should give the capability <STRONG>in</STRONG>, which stands
+ minal does not distinguish between blanks and untyped
+ positions. If the "abc" shifts over to the "def" which
+ then move together around the end of the current line and
+ onto the next as you insert, you have the second type of
+ terminal, and should give the capability <STRONG>in</STRONG>, which stands
for "insert null". While these are two logically separate
- attributes (one line versus multi-line insert mode, and
- special treatment of untyped spaces) we have seen no ter-
+ attributes (one line versus multi-line insert mode, and
+ special treatment of untyped spaces) we have seen no ter-
minals whose insert mode cannot be described with the sin-
gle attribute.
- Terminfo can describe both terminals which have an insert
+ Terminfo can describe both terminals which have an insert
mode, and terminals which send a simple sequence to open a
- blank position on the current line. Give as <STRONG>smir</STRONG> the
- sequence to get into insert mode. Give as <STRONG>rmir</STRONG> the
- sequence to leave insert mode. Now give as <STRONG>ich1</STRONG> any
- sequence needed to be sent just before sending the charac-
- ter to be inserted. Most terminals with a true insert
- mode will not give <STRONG>ich1</STRONG>; terminals which send a sequence
- to open a screen position should give it here.
-
- If your terminal has both, insert mode is usually prefer-
- able to <STRONG>ich1</STRONG>. Technically, you should not give both
- unless the terminal actually requires both to be used in
- combination. Accordingly, some non-curses applications
- get confused if both are present; the symptom is doubled
+ blank position on the current line. Give as <STRONG>smir</STRONG> the
+ sequence to get into insert mode. Give as <STRONG>rmir</STRONG> the
+ sequence to leave insert mode. Now give as <STRONG>ich1</STRONG> any
+ sequence needed to be sent just before sending the
+ character to be inserted. Most terminals with a true
+ insert mode will not give <STRONG>ich1</STRONG>; terminals which send a
+ sequence to open a screen position should give it here.
+
+ If your terminal has both, insert mode is usually prefer-
+ able to <STRONG>ich1</STRONG>. Technically, you should not give both
+ unless the terminal actually requires both to be used in
+ combination. Accordingly, some non-curses applications
+ get confused if both are present; the symptom is doubled
characters in an update using insert. This requirement is
now rare; most <STRONG>ich</STRONG> sequences do not require previous smir,
and most smir insert modes do not require <STRONG>ich1</STRONG> before each
- character. Therefore, the new <STRONG>curses</STRONG> actually assumes
- this is the case and uses either <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> or <STRONG>ich</STRONG>/<STRONG>ich1</STRONG> as
+ character. Therefore, the new <STRONG>curses</STRONG> actually assumes
+ this is the case and uses either <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> or <STRONG>ich</STRONG>/<STRONG>ich1</STRONG> as
appropriate (but not both). If you have to write an entry
- to be used under new curses for a terminal old enough to
+ to be used under new curses for a terminal old enough to
need both, include the <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> sequences in <STRONG>ich1</STRONG>.
If post insert padding is needed, give this as a number of
- milliseconds in <STRONG>ip</STRONG> (a string option). Any other sequence
- which may need to be sent after an insert of a single
+ milliseconds in <STRONG>ip</STRONG> (a string option). Any other sequence
+ which may need to be sent after an insert of a single
character may also be given in <STRONG>ip</STRONG>. If your terminal needs
both to be placed into an `insert mode' and a special code
- to precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG>
- and <STRONG>ich1</STRONG> can be given, and both will be used. The <STRONG>ich</STRONG>
+ to precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG>
+ and <STRONG>ich1</STRONG> can be given, and both will be used. The <STRONG>ich</STRONG>
capability, with one parameter, <EM>n</EM>, will repeat the effects
of <STRONG>ich1</STRONG> <EM>n</EM> times.
If padding is necessary between characters typed while not
- in insert mode, give this as a number of milliseconds
+ in insert mode, give this as a number of milliseconds
padding in <STRONG>rmp</STRONG>.
- It is occasionally necessary to move around while in
- insert mode to delete characters on the same line (e.g.,
- if there is a tab after the insertion position). If your
- terminal allows motion while in insert mode you can give
- the capability <STRONG>mir</STRONG> to speed up inserting in this case.
- Omitting <STRONG>mir</STRONG> will affect only speed. Some terminals
+ It is occasionally necessary to move around while in
+ insert mode to delete characters on the same line (e.g.,
+ if there is a tab after the insertion position). If your
+ terminal allows motion while in insert mode you can give
+ the capability <STRONG>mir</STRONG> to speed up inserting in this case.
+ Omitting <STRONG>mir</STRONG> will affect only speed. Some terminals
(notably Datamedia's) must not have <STRONG>mir</STRONG> because of the way
their insert mode works.
- Finally, you can specify <STRONG>dch1</STRONG> to delete a single charac-
- ter, <STRONG>dch</STRONG> with one parameter, <EM>n</EM>, to delete <EM>n</EM> <EM>characters,</EM>
- and delete mode by giving <STRONG>smdc</STRONG> and <STRONG>rmdc</STRONG> to enter and exit
- delete mode (any mode the terminal needs to be placed in
+ Finally, you can specify <STRONG>dch1</STRONG> to delete a single charac-
+ ter, <STRONG>dch</STRONG> with one parameter, <EM>n</EM>, to delete <EM>n</EM> <EM>characters,</EM>
+ and delete mode by giving <STRONG>smdc</STRONG> and <STRONG>rmdc</STRONG> to enter and exit
+ delete mode (any mode the terminal needs to be placed in
for <STRONG>dch1</STRONG> to work).
- A command to erase <EM>n</EM> characters (equivalent to outputting
- <EM>n</EM> blanks without moving the cursor) can be given as <STRONG>ech</STRONG>
+ A command to erase <EM>n</EM> characters (equivalent to outputting
+ <EM>n</EM> blanks without moving the cursor) can be given as <STRONG>ech</STRONG>
with one parameter.
<STRONG>Highlighting,</STRONG> <STRONG>Underlining,</STRONG> <STRONG>and</STRONG> <STRONG>Visible</STRONG> <STRONG>Bells</STRONG>
If your terminal has one or more kinds of display
- attributes, these can be represented in a number of dif-
+ attributes, these can be represented in a number of dif-
ferent ways. You should choose one display form as <EM>stand-</EM>
<EM>out</EM> <EM>mode</EM>, representing a good, high contrast, easy-on-the-
- eyes, format for highlighting error messages and other
- attention getters. (If you have a choice, reverse video
- plus half-bright is good, or reverse video alone.) The
- sequences to enter and exit standout mode are given as
- <STRONG>smso</STRONG> and <STRONG>rmso</STRONG>, respectively. If the code to change into
- or out of standout mode leaves one or even two blank
- spaces on the screen, as the TVI 912 and Teleray 1061 do,
+ eyes, format for highlighting error messages and other
+ attention getters. (If you have a choice, reverse video
+ plus half-bright is good, or reverse video alone.) The
+ sequences to enter and exit standout mode are given as
+ <STRONG>smso</STRONG> and <STRONG>rmso</STRONG>, respectively. If the code to change into
+ or out of standout mode leaves one or even two blank
+ spaces on the screen, as the TVI 912 and Teleray 1061 do,
then <STRONG>xmc</STRONG> should be given to tell how many spaces are left.
- Codes to begin underlining and end underlining can be
- given as <STRONG>smul</STRONG> and <STRONG>rmul</STRONG> respectively. If the terminal has
- a code to underline the current character and move the
+ Codes to begin underlining and end underlining can be
+ given as <STRONG>smul</STRONG> and <STRONG>rmul</STRONG> respectively. If the terminal has
+ a code to underline the current character and move the
cursor one space to the right, such as the Microterm Mime,
this can be given as <STRONG>uc</STRONG>.
- Other capabilities to enter various highlighting modes
- include <STRONG>blink</STRONG> (blinking) <STRONG>bold</STRONG> (bold or extra bright) <STRONG>dim</STRONG>
- (dim or half-bright) <STRONG>invis</STRONG> (blanking or invisible text)
- <STRONG>prot</STRONG> (protected) <STRONG>rev</STRONG> (reverse video) <STRONG>sgr0</STRONG> (turn off <EM>all</EM>
- attribute modes) <STRONG>smacs</STRONG> (enter alternate character set
- mode) and <STRONG>rmacs</STRONG> (exit alternate character set mode).
- Turning on any of these modes singly may or may not turn
+ Other capabilities to enter various highlighting modes
+ include <STRONG>blink</STRONG> (blinking) <STRONG>bold</STRONG> (bold or extra bright) <STRONG>dim</STRONG>
+ (dim or half-bright) <STRONG>invis</STRONG> (blanking or invisible text)
+ <STRONG>prot</STRONG> (protected) <STRONG>rev</STRONG> (reverse video) <STRONG>sgr0</STRONG> (turn off <EM>all</EM>
+ attribute modes) <STRONG>smacs</STRONG> (enter alternate character set
+ mode) and <STRONG>rmacs</STRONG> (exit alternate character set mode).
+ Turning on any of these modes singly may or may not turn
off other modes.
- If there is a sequence to set arbitrary combinations of
- modes, this should be given as <STRONG>sgr</STRONG> (set attributes), tak-
- ing 9 parameters. Each parameter is either 0 or nonzero,
+ If there is a sequence to set arbitrary combinations of
+ modes, this should be given as <STRONG>sgr</STRONG> (set attributes), tak-
+ ing 9 parameters. Each parameter is either 0 or nonzero,
as the corresponding attribute is on or off. The 9 param-
- eters are, in order: standout, underline, reverse, blink,
- dim, bold, blank, protect, alternate character set. Not
- all modes need be supported by <STRONG>sgr</STRONG>, only those for which
+ eters are, in order: standout, underline, reverse, blink,
+ dim, bold, blank, protect, alternate character set. Not
+ all modes need be supported by <STRONG>sgr</STRONG>, only those for which
corresponding separate attribute commands exist.
For example, the DEC vt220 supports most of the modes:
- <STRONG>tparm</STRONG> <STRONG>parameter</STRONG> <STRONG>attribute</STRONG> <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
+ <STRONG>tparm</STRONG> <STRONG>parameter</STRONG> <STRONG>attribute</STRONG> <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
- none none \E[0m
- p1 standout \E[0;1;7m
- p2 underline \E[0;4m
- p3 reverse \E[0;7m
- p4 blink \E[0;5m
- p5 dim not available
- p6 bold \E[0;1m
- p7 invis \E[0;8m
- p8 protect not used
- p9 altcharset ^O (off) ^N (on)
+ none none \E[0m
+ p1 standout \E[0;1;7m
+ p2 underline \E[0;4m
+ p3 reverse \E[0;7m
+ p4 blink \E[0;5m
+ p5 dim not available
+ p6 bold \E[0;1m
+ p7 invis \E[0;8m
+ p8 protect not used
+ p9 altcharset ^O (off) ^N (on)
- We begin each escape sequence by turning off any existing
- modes, since there is no quick way to determine whether
+ We begin each escape sequence by turning off any existing
+ modes, since there is no quick way to determine whether
they are active. Standout is set up to be the combination
- of reverse and bold. The vt220 terminal has a protect
- mode, though it is not commonly used in sgr because it
- protects characters on the screen from the host's era-
- sures. The altcharset mode also is different in that it
- is either ^O or ^N, depending on whether it is off or on.
- If all modes are turned on, the resulting sequence is
+ of reverse and bold. The vt220 terminal has a protect
+ mode, though it is not commonly used in sgr because it
+ protects characters on the screen from the host's era-
+ sures. The altcharset mode also is different in that it
+ is either ^O or ^N, depending on whether it is off or on.
+ If all modes are turned on, the resulting sequence is
\E[0;1;4;5;7;8m^N.
- Some sequences are common to different modes. For exam-
- ple, ;7 is output when either p1 or p3 is true, that is,
+ Some sequences are common to different modes. For exam-
+ ple, ;7 is output when either p1 or p3 is true, that is,
if either standout or reverse modes are turned on.
- Writing out the above sequences, along with their depen-
+ Writing out the above sequences, along with their depen-
dencies yields
- <STRONG>sequence</STRONG> <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG> <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
+ <STRONG>sequence</STRONG> <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG> <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
- \E[0 always \E[0
- ;1 if p1 or p6 %?%p1%p6%|%t;1%;
- ;4 if p2 %?%p2%|%t;4%;
- ;5 if p4 %?%p4%|%t;5%;
- ;7 if p1 or p3 %?%p1%p3%|%t;7%;
- ;8 if p7 %?%p7%|%t;8%;
+ \E[0 always \E[0
+ ;1 if p1 or p6 %?%p1%p6%|%t;1%;
+ ;4 if p2 %?%p2%|%t;4%;
+ ;5 if p4 %?%p4%|%t;5%;
+ ;7 if p1 or p3 %?%p1%p3%|%t;7%;
+ ;8 if p7 %?%p7%|%t;8%;
- m always m
- ^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;
+ m always m
+ ^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;
Putting this all together into the sgr sequence gives:
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;
%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- Remember that if you specify sgr, you must also specify
- sgr0. Also, some implementations rely on sgr being given
- if sgr0 is, Not all terminfo entries necessarily have an
- sgr string, however. Many terminfo entries are derived
- from termcap entries which have no sgr string. The only
- drawback to adding an sgr string is that termcap also
- assumes that sgr0 does not exit alternate character set
+ Remember that if you specify sgr, you must also specify
+ sgr0. Also, some implementations rely on sgr being given
+ if sgr0 is, Not all terminfo entries necessarily have an
+ sgr string, however. Many terminfo entries are derived
+ from termcap entries which have no sgr string. The only
+ drawback to adding an sgr string is that termcap also
+ assumes that sgr0 does not exit alternate character set
mode.
- Terminals with the ``magic cookie'' glitch (<STRONG>xmc</STRONG>) deposit
- special ``cookies'' when they receive mode-setting
- sequences, which affect the display algorithm rather than
- having extra bits for each character. Some terminals,
- such as the HP 2621, automatically leave standout mode
- when they move to a new line or the cursor is addressed.
- Programs using standout mode should exit standout mode
- before moving the cursor or sending a newline, unless the
- <STRONG>msgr</STRONG> capability, asserting that it is safe to move in
+ Terminals with the ``magic cookie'' glitch (<STRONG>xmc</STRONG>) deposit
+ special ``cookies'' when they receive mode-setting
+ sequences, which affect the display algorithm rather than
+ having extra bits for each character. Some terminals,
+ such as the HP 2621, automatically leave standout mode
+ when they move to a new line or the cursor is addressed.
+ Programs using standout mode should exit standout mode
+ before moving the cursor or sending a newline, unless the
+ <STRONG>msgr</STRONG> capability, asserting that it is safe to move in
standout mode, is present.
- If the terminal has a way of flashing the screen to indi-
- cate an error quietly (a bell replacement) then this can
+ If the terminal has a way of flashing the screen to indi-
+ cate an error quietly (a bell replacement) then this can
be given as <STRONG>flash</STRONG>; it must not move the cursor.
- If the cursor needs to be made more visible than normal
+ If the cursor needs to be made more visible than normal
when it is not on the bottom line (to make, for example, a
- non-blinking underline into an easier to find block or
+ non-blinking underline into an easier to find block or
blinking underline) give this sequence as <STRONG>cvvis</STRONG>. If there
- is a way to make the cursor completely invisible, give
+ is a way to make the cursor completely invisible, give
that as <STRONG>civis</STRONG>. The capability <STRONG>cnorm</STRONG> should be given which
undoes the effects of both of these modes.
If your terminal correctly generates underlined characters
- (with no special codes needed) even though it does not
- overstrike, then you should give the capability <STRONG>ul</STRONG>. If a
- character overstriking another leaves both characters on
+ (with no special codes needed) even though it does not
+ overstrike, then you should give the capability <STRONG>ul</STRONG>. If a
+ character overstriking another leaves both characters on
the screen, specify the capability <STRONG>os</STRONG>. If overstrikes are
- erasable with a blank, then this should be indicated by
+ erasable with a blank, then this should be indicated by
giving <STRONG>eo</STRONG>.
<STRONG>Keypad</STRONG> <STRONG>and</STRONG> <STRONG>Function</STRONG> <STRONG>Keys</STRONG>
If the terminal has a keypad that transmits codes when the
- keys are pressed, this information can be given. Note
+ keys are pressed, this information can be given. Note
that it is not possible to handle terminals where the key-
pad only works in local (this applies, for example, to the
- unshifted HP 2621 keys). If the keypad can be set to
- transmit or not transmit, give these codes as <STRONG>smkx</STRONG> and
+ unshifted HP 2621 keys). If the keypad can be set to
+ transmit or not transmit, give these codes as <STRONG>smkx</STRONG> and
<STRONG>rmkx</STRONG>. Otherwise the keypad is assumed to always transmit.
- The codes sent by the left arrow, right arrow, up arrow,
- down arrow, and home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG>
- <STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG> respectively. If there are func-
- tion keys such as f0, f1, ..., f10, the codes they send
- can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>. If these keys have
- labels other than the default f0 through f10, the labels
- can be given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>. The codes transmit-
- ted by certain other special keys can be given: <STRONG>kll</STRONG> (home
- down), <STRONG>kbs</STRONG> (backspace), <STRONG>ktbc</STRONG> (clear all tabs), <STRONG>kctab</STRONG>
+ The codes sent by the left arrow, right arrow, up arrow,
+ down arrow, and home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG>
+ <STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG> respectively. If there are func-
+ tion keys such as f0, f1, ..., f10, the codes they send
+ can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>. If these keys have
+ labels other than the default f0 through f10, the labels
+ can be given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>. The codes transmit-
+ ted by certain other special keys can be given: <STRONG>kll</STRONG> (home
+ down), <STRONG>kbs</STRONG> (backspace), <STRONG>ktbc</STRONG> (clear all tabs), <STRONG>kctab</STRONG>
(clear the tab stop in this column), <STRONG>kclr</STRONG> (clear screen or
- erase key), <STRONG>kdch1</STRONG> (delete character), <STRONG>kdl1</STRONG> (delete line),
- <STRONG>krmir</STRONG> (exit insert mode), <STRONG>kel</STRONG> (clear to end of line), <STRONG>ked</STRONG>
+ erase key), <STRONG>kdch1</STRONG> (delete character), <STRONG>kdl1</STRONG> (delete line),
+ <STRONG>krmir</STRONG> (exit insert mode), <STRONG>kel</STRONG> (clear to end of line), <STRONG>ked</STRONG>
(clear to end of screen), <STRONG>kich1</STRONG> (insert character or enter
- insert mode), <STRONG>kil1</STRONG> (insert line), <STRONG>knp</STRONG> (next page), <STRONG>kpp</STRONG>
- (previous page), <STRONG>kind</STRONG> (scroll forward/down), <STRONG>kri</STRONG> (scroll
- backward/up), <STRONG>khts</STRONG> (set a tab stop in this column). In
+ insert mode), <STRONG>kil1</STRONG> (insert line), <STRONG>knp</STRONG> (next page), <STRONG>kpp</STRONG>
+ (previous page), <STRONG>kind</STRONG> (scroll forward/down), <STRONG>kri</STRONG> (scroll
+ backward/up), <STRONG>khts</STRONG> (set a tab stop in this column). In
addition, if the keypad has a 3 by 3 array of keys includ-
- ing the four arrow keys, the other five keys can be given
- as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>, <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>. These keys are useful
+ ing the four arrow keys, the other five keys can be given
+ as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>, <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>. These keys are useful
when the effects of a 3 by 3 directional pad are needed.
- Strings to program function keys can be given as <STRONG>pfkey</STRONG>,
- <STRONG>pfloc</STRONG>, and <STRONG>pfx</STRONG>. A string to program screen labels should
- be specified as <STRONG>pln</STRONG>. Each of these strings takes two
- parameters: the function key number to program (from 0 to
- 10) and the string to program it with. Function key num-
- bers out of this range may program undefined keys in a
- terminal dependent manner. The difference between the
- capabilities is that <STRONG>pfkey</STRONG> causes pressing the given key
- to be the same as the user typing the given string; <STRONG>pfloc</STRONG>
+ Strings to program function keys can be given as <STRONG>pfkey</STRONG>,
+ <STRONG>pfloc</STRONG>, and <STRONG>pfx</STRONG>. A string to program screen labels should
+ be specified as <STRONG>pln</STRONG>. Each of these strings takes two
+ parameters: the function key number to program (from 0 to
+ 10) and the string to program it with. Function key num-
+ bers out of this range may program undefined keys in a
+ terminal dependent manner. The difference between the
+ capabilities is that <STRONG>pfkey</STRONG> causes pressing the given key
+ to be the same as the user typing the given string; <STRONG>pfloc</STRONG>
causes the string to be executed by the terminal in local;
- and <STRONG>pfx</STRONG> causes the string to be transmitted to the com-
+ and <STRONG>pfx</STRONG> causes the string to be transmitted to the com-
puter.
The capabilities <STRONG>nlab</STRONG>, <STRONG>lw</STRONG> and <STRONG>lh</STRONG> define the number of pro-
- grammable screen labels and their width and height. If
- there are commands to turn the labels on and off, give
- them in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>. <STRONG>smln</STRONG> is normally output after one
+ grammable screen labels and their width and height. If
+ there are commands to turn the labels on and off, give
+ them in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>. <STRONG>smln</STRONG> is normally output after one
or more pln sequences to make sure that the change becomes
visible.
<STRONG>Tabs</STRONG> <STRONG>and</STRONG> <STRONG>Initialization</STRONG>
- If the terminal has hardware tabs, the command to advance
- to the next tab stop can be given as <STRONG>ht</STRONG> (usually control
- I). A ``back-tab'' command which moves leftward to the
+ If the terminal has hardware tabs, the command to advance
+ to the next tab stop can be given as <STRONG>ht</STRONG> (usually control
+ I). A ``back-tab'' command which moves leftward to the
preceding tab stop can be given as <STRONG>cbt</STRONG>. By convention, if
- the teletype modes indicate that tabs are being expanded
- by the computer rather than being sent to the terminal,
- programs should not use <STRONG>ht</STRONG> or <STRONG>cbt</STRONG> even if they are
- present, since the user may not have the tab stops prop-
- erly set. If the terminal has hardware tabs which are
- initially set every <EM>n</EM> spaces when the terminal is powered
- up, the numeric parameter <STRONG>it</STRONG> is given, showing the number
- of spaces the tabs are set to. This is normally used by
- the <EM>tset</EM> command to determine whether to set the mode for
- hardware tab expansion, and whether to set the tab stops.
- If the terminal has tab stops that can be saved in non-
- volatile memory, the terminfo description can assume that
+ the teletype modes indicate that tabs are being expanded
+ by the computer rather than being sent to the terminal,
+ programs should not use <STRONG>ht</STRONG> or <STRONG>cbt</STRONG> even if they are
+ present, since the user may not have the tab stops prop-
+ erly set. If the terminal has hardware tabs which are
+ initially set every <EM>n</EM> spaces when the terminal is powered
+ up, the numeric parameter <STRONG>it</STRONG> is given, showing the number
+ of spaces the tabs are set to. This is normally used by
+ the <EM>tset</EM> command to determine whether to set the mode for
+ hardware tab expansion, and whether to set the tab stops.
+ If the terminal has tab stops that can be saved in non-
+ volatile memory, the terminfo description can assume that
they are properly set.
- Other capabilities include <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and <STRONG>is3</STRONG>, initializa-
- tion strings for the terminal, <STRONG>iprog</STRONG>, the path name of a
- program to be run to initialize the terminal, and <STRONG>if</STRONG>, the
- name of a file containing long initialization strings.
- These strings are expected to set the terminal into modes
- consistent with the rest of the terminfo description.
+ Other capabilities include <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and <STRONG>is3</STRONG>, initializa-
+ tion strings for the terminal, <STRONG>iprog</STRONG>, the path name of a
+ program to be run to initialize the terminal, and <STRONG>if</STRONG>, the
+ name of a file containing long initialization strings.
+ These strings are expected to set the terminal into modes
+ consistent with the rest of the terminfo description.
They are normally sent to the terminal, by the <EM>init</EM> option
- of the <EM>tput</EM> program, each time the user logs in. They
+ of the <EM>tput</EM> program, each time the user logs in. They
will be printed in the following order:
run the program
and finally
output <STRONG>is3</STRONG>.
- Most initialization is done with <STRONG>is2</STRONG>. Special terminal
+ Most initialization is done with <STRONG>is2</STRONG>. Special terminal
modes can be set up without duplicating strings by putting
- the common sequences in <STRONG>is2</STRONG> and special cases in <STRONG>is1</STRONG> and
+ the common sequences in <STRONG>is2</STRONG> and special cases in <STRONG>is1</STRONG> and
<STRONG>is3</STRONG>.
A set of sequences that does a harder reset from a totally
unknown state can be given as <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rf</STRONG> and <STRONG>rs3</STRONG>, analo-
- gous to <STRONG>is1</STRONG> <STRONG>,</STRONG> <STRONG>is2</STRONG> <STRONG>,</STRONG> <STRONG>if</STRONG> and <STRONG>is3</STRONG> respectively. These
- strings are output by the <EM>reset</EM> program, which is used
- when the terminal gets into a wedged state. Commands are
- normally placed in <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they pro-
- duce annoying effects on the screen and are not necessary
- when logging in. For example, the command to set the
- vt100 into 80-column mode would normally be part of <STRONG>is2</STRONG>,
- but it causes an annoying glitch of the screen and is not
- normally needed since the terminal is usually already in
+ gous to <STRONG>is1</STRONG> <STRONG>,</STRONG> <STRONG>is2</STRONG> <STRONG>,</STRONG> <STRONG>if</STRONG> and <STRONG>is3</STRONG> respectively. These
+ strings are output by the <EM>reset</EM> program, which is used
+ when the terminal gets into a wedged state. Commands are
+ normally placed in <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they pro-
+ duce annoying effects on the screen and are not necessary
+ when logging in. For example, the command to set the
+ vt100 into 80-column mode would normally be part of <STRONG>is2</STRONG>,
+ but it causes an annoying glitch of the screen and is not
+ normally needed since the terminal is usually already in
80 column mode.
The <EM>reset</EM> program writes strings including <STRONG>iprog</STRONG>, etc., in
- the same order as the <EM>init</EM> program, using <STRONG>rs1</STRONG>, etc.,
+ the same order as the <EM>init</EM> program, using <STRONG>rs1</STRONG>, etc.,
instead of <STRONG>is1</STRONG>, etc. If any of <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rs3</STRONG>, or <STRONG>rf</STRONG> reset
- capability strings are missing, the <EM>reset</EM> program falls
+ capability strings are missing, the <EM>reset</EM> program falls
back upon the corresponding initialization capability
string.
If there are commands to set and clear tab stops, they can
- be given as <STRONG>tbc</STRONG> (clear all tab stops) and <STRONG>hts</STRONG> (set a tab
- stop in the current column of every row). If a more com-
- plex sequence is needed to set the tabs than can be
- described by this, the sequence can be placed in <STRONG>is2</STRONG> or
+ be given as <STRONG>tbc</STRONG> (clear all tab stops) and <STRONG>hts</STRONG> (set a tab
+ stop in the current column of every row). If a more com-
+ plex sequence is needed to set the tabs than can be
+ described by this, the sequence can be placed in <STRONG>is2</STRONG> or
<STRONG>if</STRONG>.
<STRONG>Delays</STRONG> <STRONG>and</STRONG> <STRONG>Padding</STRONG>
- Many older and slower terminals do not support either
+ Many older and slower terminals do not support either
XON/XOFF or DTR handshaking, including hard copy terminals
- and some very archaic CRTs (including, for example, DEC
- VT100s). These may require padding characters after cer-
+ and some very archaic CRTs (including, for example, DEC
+ VT100s). These may require padding characters after cer-
tain cursor motions and screen changes.
If the terminal uses xon/xoff handshaking for flow control
- (that is, it automatically emits ^S back to the host when
+ (that is, it automatically emits ^S back to the host when
its input buffers are close to full), set <STRONG>xon</STRONG>. This capa-
- bility suppresses the emission of padding. You can also
- set it for memory-mapped console devices effectively that
- do not have a speed limit. Padding information should
- still be included so that routines can make better deci-
+ bility suppresses the emission of padding. You can also
+ set it for memory-mapped console devices effectively that
+ do not have a speed limit. Padding information should
+ still be included so that routines can make better deci-
sions about relative costs, but actual pad characters will
not be transmitted.
- If <STRONG>pb</STRONG> (padding baud rate) is given, padding is suppressed
- at baud rates below the value of <STRONG>pb</STRONG>. If the entry has no
- padding baud rate, then whether padding is emitted or not
+ If <STRONG>pb</STRONG> (padding baud rate) is given, padding is suppressed
+ at baud rates below the value of <STRONG>pb</STRONG>. If the entry has no
+ padding baud rate, then whether padding is emitted or not
is completely controlled by <STRONG>xon</STRONG>.
- If the terminal requires other than a null (zero)
- character as a pad, then this can be given as <STRONG>pad</STRONG>. Only
- the first character of the <STRONG>pad</STRONG> string is used.
+ If the terminal requires other than a null (zero) charac-
+ ter as a pad, then this can be given as <STRONG>pad</STRONG>. Only the
+ first character of the <STRONG>pad</STRONG> string is used.
<STRONG>Status</STRONG> <STRONG>Lines</STRONG>
- Some terminals have an extra `status line' which is not
- normally used by software (and thus not counted in the
+ Some terminals have an extra `status line' which is not
+ normally used by software (and thus not counted in the
terminal's <STRONG>lines</STRONG> capability).
- The simplest case is a status line which is cursor-
- addressable but not part of the main scrolling region on
- the screen; the Heathkit H19 has a status line of this
- kind, as would a 24-line VT100 with a 23-line scrolling
- region set up on initialization. This situation is indi-
+ The simplest case is a status line which is cursor-
+ addressable but not part of the main scrolling region on
+ the screen; the Heathkit H19 has a status line of this
+ kind, as would a 24-line VT100 with a 23-line scrolling
+ region set up on initialization. This situation is indi-
cated by the <STRONG>hs</STRONG> capability.
Some terminals with status lines need special sequences to
- access the status line. These may be expressed as a
+ access the status line. These may be expressed as a
string with single parameter <STRONG>tsl</STRONG> which takes the cursor to
- a given zero-origin column on the status line. The capa-
+ a given zero-origin column on the status line. The capa-
bility <STRONG>fsl</STRONG> must return to the main-screen cursor positions
- before the last <STRONG>tsl</STRONG>. You may need to embed the string
- values of <STRONG>sc</STRONG> (save cursor) and <STRONG>rc</STRONG> (restore cursor) in <STRONG>tsl</STRONG>
+ before the last <STRONG>tsl</STRONG>. You may need to embed the string
+ values of <STRONG>sc</STRONG> (save cursor) and <STRONG>rc</STRONG> (restore cursor) in <STRONG>tsl</STRONG>
and <STRONG>fsl</STRONG> to accomplish this.
- The status line is normally assumed to be the same width
- as the width of the terminal. If this is untrue, you can
+ The status line is normally assumed to be the same width
+ as the width of the terminal. If this is untrue, you can
specify it with the numeric capability <STRONG>wsl</STRONG>.
- A command to erase or blank the status line may be speci-
+ A command to erase or blank the status line may be speci-
fied as <STRONG>dsl</STRONG>.
- The boolean capability <STRONG>eslok</STRONG> specifies that escape
+ The boolean capability <STRONG>eslok</STRONG> specifies that escape
sequences, tabs, etc., work ordinarily in the status line.
- The <STRONG>ncurses</STRONG> implementation does not yet use any of these
- capabilities. They are documented here in case they ever
+ The <STRONG>ncurses</STRONG> implementation does not yet use any of these
+ capabilities. They are documented here in case they ever
become important.
<STRONG>Line</STRONG> <STRONG>Graphics</STRONG>
- Many terminals have alternate character sets useful for
- forms-drawing. Terminfo and <STRONG>curses</STRONG> build in support for
- the drawing characters supported by the VT100, with some
- characters from the AT&T 4410v1 added. This alternate
+ Many terminals have alternate character sets useful for
+ forms-drawing. Terminfo and <STRONG>curses</STRONG> build in support for
+ the drawing characters supported by the VT100, with some
+ characters from the AT&T 4410v1 added. This alternate
character set may be specified by the <STRONG>acsc</STRONG> capability.
- <STRONG>Glyph</STRONG> <STRONG>ACS</STRONG> <STRONG>Ascii</STRONG> <STRONG>VT100</STRONG>
- <STRONG>Name</STRONG> <STRONG>Name</STRONG> <STRONG>Default</STRONG> <STRONG>Name</STRONG>
+ <STRONG>Glyph</STRONG> <STRONG>ACS</STRONG> <STRONG>Ascii</STRONG> <STRONG>VT100</STRONG>
+ <STRONG>Name</STRONG> <STRONG>Name</STRONG> <STRONG>Default</STRONG> <STRONG>Name</STRONG>
UK pound sign ACS_STERLING f }
arrow pointing down ACS_DARROW v .
arrow pointing left ACS_LARROW < ,
lantern symbol ACS_LANTERN # i
large plus or crossover ACS_PLUS + n
less-than-or-equal-to ACS_LEQUAL < y
-
lower left corner ACS_LLCORNER + m
lower right corner ACS_LRCORNER + j
not-equal ACS_NEQUAL ! |
solid square block ACS_BLOCK # 0
tee pointing down ACS_TTEE + w
tee pointing left ACS_RTEE + u
+
tee pointing right ACS_LTEE + t
tee pointing up ACS_BTEE + v
upper left corner ACS_ULCORNER + l
upper right corner ACS_URCORNER + k
vertical line ACS_VLINE | x
- The best way to define a new device's graphics set is to
- add a column to a copy of this table for your terminal,
- giving the character which (when emitted between
- <STRONG>smacs</STRONG>/<STRONG>rmacs</STRONG> switches) will be rendered as the correspond-
- ing graphic. Then read off the VT100/your terminal char-
- acter pairs right to left in sequence; these become the
+ The best way to define a new device's graphics set is to
+ add a column to a copy of this table for your terminal,
+ giving the character which (when emitted between
+ <STRONG>smacs</STRONG>/<STRONG>rmacs</STRONG> switches) will be rendered as the correspond-
+ ing graphic. Then read off the VT100/your terminal char-
+ acter pairs right to left in sequence; these become the
ACSC string.
<STRONG>Color</STRONG> <STRONG>Handling</STRONG>
- Most color terminals are either `Tektronix-like' or `HP-
- like'. Tektronix-like terminals have a predefined set of
- N colors (where N usually 8), and can set character-cell
+ Most color terminals are either `Tektronix-like' or `HP-
+ like'. Tektronix-like terminals have a predefined set of
+ N colors (where N usually 8), and can set character-cell
foreground and background characters independently, mixing
- them into N * N color-pairs. On HP-like terminals, the
+ them into N * N color-pairs. On HP-like terminals, the
use must set each color pair up separately (foreground and
- background are not independently settable). Up to M
- color-pairs may be set up from 2*M different colors.
+ background are not independently settable). Up to M
+ color-pairs may be set up from 2*M different colors.
ANSI-compatible terminals are Tektronix-like.
Some basic color capabilities are independent of the color
method. The numeric capabilities <STRONG>colors</STRONG> and <STRONG>pairs</STRONG> specify
- the maximum numbers of colors and color-pairs that can be
- displayed simultaneously. The <STRONG>op</STRONG> (original pair) string
- resets foreground and background colors to their default
- values for the terminal. The <STRONG>oc</STRONG> string resets all colors
- or color-pairs to their default values for the terminal.
- Some terminals (including many PC terminal emulators)
- erase screen areas with the current background color
- rather than the power-up default background; these should
+ the maximum numbers of colors and color-pairs that can be
+ displayed simultaneously. The <STRONG>op</STRONG> (original pair) string
+ resets foreground and background colors to their default
+ values for the terminal. The <STRONG>oc</STRONG> string resets all colors
+ or color-pairs to their default values for the terminal.
+ Some terminals (including many PC terminal emulators)
+ erase screen areas with the current background color
+ rather than the power-up default background; these should
have the boolean capability <STRONG>bce</STRONG>.
- To change the current foreground or background color on a
- Tektronix-type terminal, use <STRONG>setaf</STRONG> (set ANSI foreground)
- and <STRONG>setab</STRONG> (set ANSI background) or <STRONG>setf</STRONG> (set foreground)
- and <STRONG>setb</STRONG> (set background). These take one parameter, the
+ To change the current foreground or background color on a
+ Tektronix-type terminal, use <STRONG>setaf</STRONG> (set ANSI foreground)
+ and <STRONG>setab</STRONG> (set ANSI background) or <STRONG>setf</STRONG> (set foreground)
+ and <STRONG>setb</STRONG> (set background). These take one parameter, the
color number. The SVr4 documentation describes only
- <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft says that "If the terminal
+ <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft says that "If the terminal
supports ANSI escape sequences to set background and fore-
- ground, they should be coded as <STRONG>setaf</STRONG> and <STRONG>setab</STRONG>, respec-
- tively. If the terminal supports other escape sequences
- to set background and foreground, they should be coded as
- <STRONG>setf</STRONG> and <STRONG>setb</STRONG>, respectively. The <EM>vidputs()</EM> function and
- the refresh functions use <STRONG>setaf</STRONG> and <STRONG>setab</STRONG> if they are
+ ground, they should be coded as <STRONG>setaf</STRONG> and <STRONG>setab</STRONG>, respec-
+ tively. If the terminal supports other escape sequences
+ to set background and foreground, they should be coded as
+ <STRONG>setf</STRONG> and <STRONG>setb</STRONG>, respectively. The <EM>vidputs()</EM> function and
+ the refresh functions use <STRONG>setaf</STRONG> and <STRONG>setab</STRONG> if they are
defined."
- The <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> and <STRONG>setf</STRONG>/<STRONG>setb</STRONG> capabilities take a single
+ The <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> and <STRONG>setf</STRONG>/<STRONG>setb</STRONG> capabilities take a single
numeric argument each. Argument values 0-7 of <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>
- are portably defined as follows (the middle column is the
+ are portably defined as follows (the middle column is the
symbolic #define available in the header for the <STRONG>curses</STRONG> or
- <STRONG>ncurses</STRONG> libraries). The terminal hardware is free to map
- these as it likes, but the RGB values indicate normal
+ <STRONG>ncurses</STRONG> libraries). The terminal hardware is free to map
+ these as it likes, but the RGB values indicate normal
locations in color space.
cyan <STRONG>COLOR_CYAN</STRONG> 6 0,max,max
white <STRONG>COLOR_WHITE</STRONG> 7 max,max,max
- The argument values of <STRONG>setf</STRONG>/<STRONG>setb</STRONG> historically correspond
+ The argument values of <STRONG>setf</STRONG>/<STRONG>setb</STRONG> historically correspond
to a different mapping, i.e.,
<STRONG>Color</STRONG> <STRONG>#define</STRONG> <STRONG>Value</STRONG> <STRONG>RGB</STRONG>
yellow <STRONG>COLOR_YELLOW</STRONG> 6 max,max,0
white <STRONG>COLOR_WHITE</STRONG> 7 max,max,max
It is important to not confuse the two sets of color capa-
- bilities; otherwise red/blue will be interchanged on the
+ bilities; otherwise red/blue will be interchanged on the
display.
- On an HP-like terminal, use <STRONG>scp</STRONG> with a color-pair number
+ On an HP-like terminal, use <STRONG>scp</STRONG> with a color-pair number
parameter to set which color pair is current.
- On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may be
- present to indicate that colors can be modified. If so,
+ On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may be
+ present to indicate that colors can be modified. If so,
the <STRONG>initc</STRONG> capability will take a color number (0 to <STRONG>colors</STRONG>
- - 1)and three more parameters which describe the color.
+ - 1)and three more parameters which describe the color.
These three parameters default to being interpreted as RGB
- (Red, Green, Blue) values. If the boolean capability <STRONG>hls</STRONG>
+ (Red, Green, Blue) values. If the boolean capability <STRONG>hls</STRONG>
is present, they are instead as HLS (Hue, Lightness, Satu-
ration) indices. The ranges are terminal-dependent.
- On an HP-like terminal, <STRONG>initp</STRONG> may give a capability for
- changing a color-pair value. It will take seven parame-
- ters; a color-pair number (0 to <STRONG>max_pairs</STRONG> - 1), and two
- triples describing first background and then foreground
- colors. These parameters must be (Red, Green, Blue) or
+ On an HP-like terminal, <STRONG>initp</STRONG> may give a capability for
+ changing a color-pair value. It will take seven parame-
+ ters; a color-pair number (0 to <STRONG>max_pairs</STRONG> - 1), and two
+ triples describing first background and then foreground
+ colors. These parameters must be (Red, Green, Blue) or
(Hue, Lightness, Saturation) depending on <STRONG>hls</STRONG>.
- On some color terminals, colors collide with highlights.
+ On some color terminals, colors collide with highlights.
You can register these collisions with the <STRONG>ncv</STRONG> capability.
- This is a bit-mask of attributes not to be used when col-
- ors are enabled. The correspondence with the attributes
+ This is a bit-mask of attributes not to be used when col-
+ ors are enabled. The correspondence with the attributes
understood by <STRONG>curses</STRONG> is as follows:
A_BOLD 5 32
A_INVIS 6 64
A_PROTECT 7 128
-
A_ALTCHARSET 8 256
- For example, on many IBM PC consoles, the underline
- attribute collides with the foreground color blue and is
- not available in color mode. These should have an <STRONG>ncv</STRONG>
+ For example, on many IBM PC consoles, the underline
+ attribute collides with the foreground color blue and is
+ not available in color mode. These should have an <STRONG>ncv</STRONG>
capability of 2.
- SVr4 curses does nothing with <STRONG>ncv</STRONG>, ncurses recognizes it
+ SVr4 curses does nothing with <STRONG>ncv</STRONG>, ncurses recognizes it
and optimizes the output in favor of colors.
<STRONG>Miscellaneous</STRONG>
- If the terminal requires other than a null (zero) charac-
- ter as a pad, then this can be given as pad. Only the
- first character of the pad string is used. If the termi-
+ If the terminal requires other than a null (zero) charac-
+ ter as a pad, then this can be given as pad. Only the
+ first character of the pad string is used. If the termi-
nal does not have a pad character, specify npc. Note that
- ncurses implements the termcap-compatible <STRONG>PC</STRONG> variable;
- though the application may set this value to something
- other than a null, ncurses will test <STRONG>npc</STRONG> first and use
+ ncurses implements the termcap-compatible <STRONG>PC</STRONG> variable;
+ though the application may set this value to something
+ other than a null, ncurses will test <STRONG>npc</STRONG> first and use
napms if the terminal has no pad character.
- If the terminal can move up or down half a line, this can
- be indicated with <STRONG>hu</STRONG> (half-line up) and <STRONG>hd</STRONG> (half-line
+ If the terminal can move up or down half a line, this can
+ be indicated with <STRONG>hu</STRONG> (half-line up) and <STRONG>hd</STRONG> (half-line
down). This is primarily useful for superscripts and sub-
- scripts on hard-copy terminals. If a hard-copy terminal
- can eject to the next page (form feed), give this as <STRONG>ff</STRONG>
+ scripts on hard-copy terminals. If a hard-copy terminal
+ can eject to the next page (form feed), give this as <STRONG>ff</STRONG>
(usually control L).
- If there is a command to repeat a given character a given
- number of times (to save time transmitting a large number
- of identical characters) this can be indicated with the
- parameterized string <STRONG>rep</STRONG>. The first parameter is the
- character to be repeated and the second is the number of
- times to repeat it. Thus, tparm(repeat_char, 'x', 10) is
+ If there is a command to repeat a given character a given
+ number of times (to save time transmitting a large number
+ of identical characters) this can be indicated with the
+ parameterized string <STRONG>rep</STRONG>. The first parameter is the
+ character to be repeated and the second is the number of
+ times to repeat it. Thus, tparm(repeat_char, 'x', 10) is
the same as `xxxxxxxxxx'.
- If the terminal has a settable command character, such as
- the TEKTRONIX 4025, this can be indicated with <STRONG>cmdch</STRONG>. A
+ If the terminal has a settable command character, such as
+ the TEKTRONIX 4025, this can be indicated with <STRONG>cmdch</STRONG>. A
prototype command character is chosen which is used in all
- capabilities. This character is given in the <STRONG>cmdch</STRONG> capa-
- bility to identify it. The following convention is sup-
- ported on some UNIX systems: The environment is to be
- searched for a <STRONG>CC</STRONG> variable, and if found, all occurrences
+ capabilities. This character is given in the <STRONG>cmdch</STRONG> capa-
+ bility to identify it. The following convention is sup-
+ ported on some UNIX systems: The environment is to be
+ searched for a <STRONG>CC</STRONG> variable, and if found, all occurrences
of the prototype character are replaced with the character
in the environment variable.
- Terminal descriptions that do not represent a specific
+ Terminal descriptions that do not represent a specific
kind of known terminal, such as <EM>switch</EM>, <EM>dialup</EM>, <EM>patch</EM>, and
- <EM>network</EM>, should include the <STRONG>gn</STRONG> (generic) capability so
- that programs can complain that they do not know how to
- talk to the terminal. (This capability does not apply to
- <EM>virtual</EM> terminal descriptions for which the escape
+ <EM>network</EM>, should include the <STRONG>gn</STRONG> (generic) capability so
+ that programs can complain that they do not know how to
+ talk to the terminal. (This capability does not apply to
+ <EM>virtual</EM> terminal descriptions for which the escape
sequences are known.)
- If the terminal has a ``meta key'' which acts as a shift
- key, setting the 8th bit of any character transmitted,
- this fact can be indicated with <STRONG>km</STRONG>. Otherwise, software
+ If the terminal has a ``meta key'' which acts as a shift
+ key, setting the 8th bit of any character transmitted,
+ this fact can be indicated with <STRONG>km</STRONG>. Otherwise, software
will assume that the 8th bit is parity and it will usually
- be cleared. If strings exist to turn this ``meta mode''
+ be cleared. If strings exist to turn this ``meta mode''
on and off, they can be given as <STRONG>smm</STRONG> and <STRONG>rmm</STRONG>.
- If the terminal has more lines of memory than will fit on
- the screen at once, the number of lines of memory can be
- indicated with <STRONG>lm</STRONG>. A value of <STRONG>lm</STRONG>#0 indicates that the
+ If the terminal has more lines of memory than will fit on
+ the screen at once, the number of lines of memory can be
+ indicated with <STRONG>lm</STRONG>. A value of <STRONG>lm</STRONG>#0 indicates that the
number of lines is not fixed, but that there is still more
memory than fits on the screen.
If the terminal is one of those supported by the UNIX vir-
- tual terminal protocol, the terminal number can be given
+ tual terminal protocol, the terminal number can be given
as <STRONG>vt</STRONG>.
Media copy strings which control an auxiliary printer con-
nected to the terminal can be given as <STRONG>mc0</STRONG>: print the con-
- tents of the screen, <STRONG>mc4</STRONG>: turn off the printer, and <STRONG>mc5</STRONG>:
- turn on the printer. When the printer is on, all text
- sent to the terminal will be sent to the printer. It is
+ tents of the screen, <STRONG>mc4</STRONG>: turn off the printer, and <STRONG>mc5</STRONG>:
+ turn on the printer. When the printer is on, all text
+ sent to the terminal will be sent to the printer. It is
undefined whether the text is also displayed on the termi-
nal screen when the printer is on. A variation <STRONG>mc5p</STRONG> takes
one parameter, and leaves the printer on for as many char-
- acters as the value of the parameter, then turns the
- printer off. The parameter should not exceed 255. All
+ acters as the value of the parameter, then turns the
+ printer off. The parameter should not exceed 255. All
text, including <STRONG>mc4</STRONG>, is transparently passed to the
printer while an <STRONG>mc5p</STRONG> is in effect.
<STRONG>Glitches</STRONG> <STRONG>and</STRONG> <STRONG>Braindamage</STRONG>
- Hazeltine terminals, which do not allow `~' characters to
+ Hazeltine terminals, which do not allow `~' characters to
be displayed should indicate <STRONG>hz</STRONG>.
Terminals which ignore a line-feed immediately after an <STRONG>am</STRONG>
wrap, such as the Concept and vt100, should indicate <STRONG>xenl</STRONG>.
- If <STRONG>el</STRONG> is required to get rid of standout (instead of
- merely writing normal text on top of it), <STRONG>xhp</STRONG> should be
+ If <STRONG>el</STRONG> is required to get rid of standout (instead of
+ merely writing normal text on top of it), <STRONG>xhp</STRONG> should be
given.
- Teleray terminals, where tabs turn all characters moved
- over to blanks, should indicate <STRONG>xt</STRONG> (destructive tabs).
- Note: the variable indicating this is now
- `dest_tabs_magic_smso'; in older versions, it was tel-
+ Teleray terminals, where tabs turn all characters moved
+ over to blanks, should indicate <STRONG>xt</STRONG> (destructive tabs).
+ Note: the variable indicating this is now
+ `dest_tabs_magic_smso'; in older versions, it was tel-
eray_glitch. This glitch is also taken to mean that it is
- not possible to position the cursor on top of a ``magic
+ not possible to position the cursor on top of a ``magic
cookie'', that to erase standout mode it is instead neces-
sary to use delete and insert line. The ncurses implemen-
tation ignores this glitch.
- The Beehive Superbee, which is unable to correctly trans-
- mit the escape or control C characters, has <STRONG>xsb</STRONG>, indicat-
- ing that the f1 key is used for escape and f2 for control
- C. (Only certain Superbees have this problem, depending
- on the ROM.) Note that in older terminfo versions, this
- capability was called `beehive_glitch'; it is now
+ The Beehive Superbee, which is unable to correctly trans-
+ mit the escape or control C characters, has <STRONG>xsb</STRONG>, indicat-
+ ing that the f1 key is used for escape and f2 for control
+ C. (Only certain Superbees have this problem, depending
+ on the ROM.) Note that in older terminfo versions, this
+ capability was called `beehive_glitch'; it is now
`no_esc_ctl_c'.
- Other specific terminal problems may be corrected by
+ Other specific terminal problems may be corrected by
adding more capabilities of the form <STRONG>x</STRONG><EM>x</EM>.
<STRONG>Similar</STRONG> <STRONG>Terminals</STRONG>
If there are two very similar terminals, one (the variant)
- can be defined as being just like the other (the base)
- with certain exceptions. In the definition of the vari-
- ant, the string capability <STRONG>use</STRONG> can be given with the name
- of the base terminal. The capabilities given before <STRONG>use</STRONG>
- override those in the base type named by <STRONG>use</STRONG>. If there
- are multiple <STRONG>use</STRONG> capabilities, they are merged in reverse
- order. That is, the rightmost <STRONG>use</STRONG> reference is processed
- first, then the one to its left, and so forth. Capabili-
- ties given explicitly in the entry override those brought
+ can be defined as being just like the other (the base)
+ with certain exceptions. In the definition of the vari-
+ ant, the string capability <STRONG>use</STRONG> can be given with the name
+ of the base terminal. The capabilities given before <STRONG>use</STRONG>
+ override those in the base type named by <STRONG>use</STRONG>. If there
+ are multiple <STRONG>use</STRONG> capabilities, they are merged in reverse
+ order. That is, the rightmost <STRONG>use</STRONG> reference is processed
+ first, then the one to its left, and so forth. Capabili-
+ ties given explicitly in the entry override those brought
in by <STRONG>use</STRONG> references.
A capability can be canceled by placing <STRONG>xx@</STRONG> to the left of
- the use reference that imports it, where <EM>xx</EM> is the capa-
+ the use reference that imports it, where <EM>xx</EM> is the capa-
bility. For example, the entry
2621-nl, smkx@, rmkx@, use=2621,
- defines a 2621-nl that does not have the <STRONG>smkx</STRONG> or <STRONG>rmkx</STRONG>
- capabilities, and hence does not turn on the function key
- labels when in visual mode. This is useful for different
+ defines a 2621-nl that does not have the <STRONG>smkx</STRONG> or <STRONG>rmkx</STRONG>
+ capabilities, and hence does not turn on the function key
+ labels when in visual mode. This is useful for different
modes for a terminal, or for different user preferences.
<STRONG>Pitfalls</STRONG> <STRONG>of</STRONG> <STRONG>Long</STRONG> <STRONG>Entries</STRONG>
- Long terminfo entries are unlikely to be a problem; to
- date, no entry has even approached terminfo's 4096-byte
+ Long terminfo entries are unlikely to be a problem; to
+ date, no entry has even approached terminfo's 4096-byte
string-table maximum. Unfortunately, the termcap transla-
tions are much more strictly limited (to 1023 bytes), thus
- termcap translations of long terminfo entries can cause
+ termcap translations of long terminfo entries can cause
problems.
- The man pages for 4.3BSD and older versions of <STRONG>tgetent()</STRONG>
- instruct the user to allocate a 1024-byte buffer for the
- termcap entry. The entry gets null-terminated by the
+ The man pages for 4.3BSD and older versions of <STRONG>tgetent()</STRONG>
+ instruct the user to allocate a 1024-byte buffer for the
+ termcap entry. The entry gets null-terminated by the
termcap library, so that makes the maximum safe length for
- a termcap entry 1k-1 (1023) bytes. Depending on what the
- application and the termcap library being used does, and
+ a termcap entry 1k-1 (1023) bytes. Depending on what the
+ application and the termcap library being used does, and
where in the termcap file the terminal type that <STRONG>tgetent()</STRONG>
is searching for is, several bad things can happen.
- Some termcap libraries print a warning message or exit if
- they find an entry that's longer than 1023 bytes; others
- do not; others truncate the entries to 1023 bytes. Some
+ Some termcap libraries print a warning message or exit if
+ they find an entry that's longer than 1023 bytes; others
+ do not; others truncate the entries to 1023 bytes. Some
application programs allocate more than the recommended 1K
for the termcap entry; others do not.
Each termcap entry has two important sizes associated with
it: before "tc" expansion, and after "tc" expansion. "tc"
- is the capability that tacks on another termcap entry to
- the end of the current one, to add on its capabilities.
- If a termcap entry does not use the "tc" capability, then
+ is the capability that tacks on another termcap entry to
+ the end of the current one, to add on its capabilities.
+ If a termcap entry does not use the "tc" capability, then
of course the two lengths are the same.
- The "before tc expansion" length is the most important
- one, because it affects more than just users of that par-
- ticular terminal. This is the length of the entry as it
+ The "before tc expansion" length is the most important
+ one, because it affects more than just users of that par-
+ ticular terminal. This is the length of the entry as it
exists in /etc/termcap, minus the backslash-newline pairs,
which <STRONG>tgetent()</STRONG> strips out while reading it. Some termcap
- libraries strip off the final newline, too (GNU termcap
+ libraries strip off the final newline, too (GNU termcap
does not). Now suppose:
- * a termcap entry before expansion is more than 1023
+ * a termcap entry before expansion is more than 1023
bytes long,
* and the application has only allocated a 1k buffer,
- * and the termcap library (like the one in BSD/OS 1.1
- and GNU) reads the whole entry into the buffer, no
- matter what its length, to see if it's the entry it
+ * and the termcap library (like the one in BSD/OS 1.1
+ and GNU) reads the whole entry into the buffer, no
+ matter what its length, to see if it is the entry it
wants,
- * and <STRONG>tgetent()</STRONG> is searching for a terminal type that
+ * and <STRONG>tgetent()</STRONG> is searching for a terminal type that
either is the long entry, appears in the termcap file
- after the long entry, or does not appear in the file
- at all (so that <STRONG>tgetent()</STRONG> has to search the whole
+ after the long entry, or does not appear in the file
+ at all (so that <STRONG>tgetent()</STRONG> has to search the whole
termcap file).
- Then <STRONG>tgetent()</STRONG> will overwrite memory, perhaps its stack,
- and probably core dump the program. Programs like telnet
- are particularly vulnerable; modern telnets pass along
- values like the terminal type automatically. The results
- are almost as undesirable with a termcap library, like
- SunOS 4.1.3 and Ultrix 4.4, that prints warning messages
- when it reads an overly long termcap entry. If a termcap
- library truncates long entries, like OSF/1 3.0, it is
- immune to dying here but will return incorrect data for
+ Then <STRONG>tgetent()</STRONG> will overwrite memory, perhaps its stack,
+ and probably core dump the program. Programs like telnet
+ are particularly vulnerable; modern telnets pass along
+ values like the terminal type automatically. The results
+ are almost as undesirable with a termcap library, like
+ SunOS 4.1.3 and Ultrix 4.4, that prints warning messages
+ when it reads an overly long termcap entry. If a termcap
+ library truncates long entries, like OSF/1 3.0, it is
+ immune to dying here but will return incorrect data for
the terminal.
The "after tc expansion" length will have a similar effect
to the above, but only for people who actually set TERM to
- that terminal type, since <STRONG>tgetent()</STRONG> only does "tc" expan-
- sion once it's found the terminal type it was looking for,
- not while searching.
+ that terminal type, since <STRONG>tgetent()</STRONG> only does "tc" expan-
+ sion once it is found the terminal type it was looking
+ for, not while searching.
In summary, a termcap entry that is longer than 1023 bytes
- can cause, on various combinations of termcap libraries
- and applications, a core dump, warnings, or incorrect
- operation. If it's too long even before "tc" expansion,
+ can cause, on various combinations of termcap libraries
+ and applications, a core dump, warnings, or incorrect
+ operation. If it is too long even before "tc" expansion,
it will have this effect even for users of some other ter-
- minal types and users whose TERM variable does not have a
+ minal types and users whose TERM variable does not have a
termcap entry.
When in -C (translate to termcap) mode, the <STRONG>ncurses</STRONG> imple-
mentation of <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG> issues warning messages when the pre-
- tc length of a termcap translation is too long. The -c
- (check) option also checks resolved (after tc expansion)
+ tc length of a termcap translation is too long. The -c
+ (check) option also checks resolved (after tc expansion)
lengths.
<STRONG>Binary</STRONG> <STRONG>Compatibility</STRONG>
- It is not wise to count on portability of binary terminfo
- entries between commercial UNIX versions. The problem is
- that there are at least two versions of terminfo (under
+ It is not wise to count on portability of binary terminfo
+ entries between commercial UNIX versions. The problem is
+ that there are at least two versions of terminfo (under
HP-UX and AIX) which diverged from System V terminfo after
- SVr1, and have added extension capabilities to the string
- table that (in the binary format) collide with System V
+ SVr1, and have added extension capabilities to the string
+ table that (in the binary format) collide with System V
and XSI Curses extensions.
</PRE>
<H2>EXTENSIONS</H2><PRE>
- Some SVr4 <STRONG>curses</STRONG> implementations, and all previous to
- SVr4, do not interpret the %A and %O operators in parame-
+ Some SVr4 <STRONG>curses</STRONG> implementations, and all previous to
+ SVr4, do not interpret the %A and %O operators in parame-
ter strings.
- SVr4/XPG4 do not specify whether <STRONG>msgr</STRONG> licenses movement
- while in an alternate-character-set mode (such modes may,
- among other things, map CR and NL to characters that do
- not trigger local motions). The <STRONG>ncurses</STRONG> implementation
- ignores <STRONG>msgr</STRONG> in <STRONG>ALTCHARSET</STRONG> mode. This raises the possi-
- bility that an XPG4 implementation making the opposite
- interpretation may need terminfo entries made for <STRONG>ncurses</STRONG>
+ SVr4/XPG4 do not specify whether <STRONG>msgr</STRONG> licenses movement
+ while in an alternate-character-set mode (such modes may,
+ among other things, map CR and NL to characters that do
+ not trigger local motions). The <STRONG>ncurses</STRONG> implementation
+ ignores <STRONG>msgr</STRONG> in <STRONG>ALTCHARSET</STRONG> mode. This raises the possi-
+ bility that an XPG4 implementation making the opposite
+ interpretation may need terminfo entries made for <STRONG>ncurses</STRONG>
to have <STRONG>msgr</STRONG> turned off.
- The <STRONG>ncurses</STRONG> library handles insert-character and insert-
+ The <STRONG>ncurses</STRONG> library handles insert-character and insert-
character modes in a slightly non-standard way to get bet-
- ter update efficiency. See the <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
+ ter update efficiency. See the <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
subsection above.
- The parameter substitutions for <STRONG>set_clock</STRONG> and <STRONG>dis-</STRONG>
- <STRONG>play_clock</STRONG> are not documented in SVr4 or the XSI Curses
+ The parameter substitutions for <STRONG>set_clock</STRONG> and <STRONG>dis-</STRONG>
+ <STRONG>play_clock</STRONG> are not documented in SVr4 or the XSI Curses
standard. They are deduced from the documentation for the
AT&T 505 terminal.
- Be careful assigning the <STRONG>kmous</STRONG> capability. The <STRONG>ncurses</STRONG>
- wants to interpret it as <STRONG>KEY_MOUSE</STRONG>, for use by terminals
- and emulators like xterm that can return mouse-tracking
+ Be careful assigning the <STRONG>kmous</STRONG> capability. The <STRONG>ncurses</STRONG>
+ wants to interpret it as <STRONG>KEY_MOUSE</STRONG>, for use by terminals
+ and emulators like xterm that can return mouse-tracking
information in the keyboard-input stream.
- Different commercial ports of terminfo and curses support
- different subsets of the XSI Curses standard and (in some
+ Different commercial ports of terminfo and curses support
+ different subsets of the XSI Curses standard and (in some
cases) different extension sets. Here is a summary, accu-
rate as of October 1995:
<STRONG>SVR4,</STRONG> <STRONG>Solaris,</STRONG> <STRONG>ncurses</STRONG> -- These support all SVr4 capabili-
ties.
- <STRONG>SGI</STRONG> -- Supports the SVr4 set, adds one undocumented
+ <STRONG>SGI</STRONG> -- Supports the SVr4 set, adds one undocumented
extended string capability (<STRONG>set_pglen</STRONG>).
- <STRONG>SVr1,</STRONG> <STRONG>Ultrix</STRONG> -- These support a restricted subset of ter-
- minfo capabilities. The booleans end with <STRONG>xon_xoff</STRONG>; the
- numerics with <STRONG>width_status_line</STRONG>; and the strings with
+ <STRONG>SVr1,</STRONG> <STRONG>Ultrix</STRONG> -- These support a restricted subset of ter-
+ minfo capabilities. The booleans end with <STRONG>xon_xoff</STRONG>; the
+ numerics with <STRONG>width_status_line</STRONG>; and the strings with
<STRONG>prtr_non</STRONG>.
- <STRONG>HP/UX</STRONG> -- Supports the SVr1 subset, plus the SVr[234]
+ <STRONG>HP/UX</STRONG> -- Supports the SVr1 subset, plus the SVr[234]
numerics <STRONG>num_labels</STRONG>, <STRONG>label_height</STRONG>, <STRONG>label_width</STRONG>, plus func-
- tion keys 11 through 63, plus <STRONG>plab_norm</STRONG>, <STRONG>label_on</STRONG>, and
+ tion keys 11 through 63, plus <STRONG>plab_norm</STRONG>, <STRONG>label_on</STRONG>, and
<STRONG>label_off</STRONG>, plus some incompatible extensions in the string
table.
- <STRONG>AIX</STRONG> -- Supports the SVr1 subset, plus function keys 11
- through 63, plus a number of incompatible string table
+ <STRONG>AIX</STRONG> -- Supports the SVr1 subset, plus function keys 11
+ through 63, plus a number of incompatible string table
extensions.
- <STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
+ <STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
</PRE>
</PRE>
<H2>SEE ALSO</H2><PRE>
- <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="printf.3.html">printf(3)</A></STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
+ <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="printf.3.html">printf(3)</A></STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
+ <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>.
</PRE>