.\"***************************************************************************
-.\" Copyright (c) 1998-2017,2018 Free Software Foundation, Inc. *
+.\" Copyright 2018-2021,2022 Thomas E. Dickey *
+.\" Copyright 1998-2016,2017 Free Software Foundation, Inc. *
.\" *
.\" Permission is hereby granted, free of charge, to any person obtaining a *
.\" copy of this software and associated documentation files (the *
.\" authorization. *
.\"***************************************************************************
.\"
-.\" $Id: tset.1,v 1.53 2018/05/19 21:07:46 tom Exp $
+.\" $Id: tset.1,v 1.62 2022/02/12 20:02:20 tom Exp $
.TH @TSET@ 1 ""
.ie \n(.g .ds `` \(lq
.el .ds `` ``
.el .IP \(bu 2
..
.SH NAME
-\fB@TSET@\fR, \fB@RESET@\fR \- terminal initialization
+\fB@TSET@\fP, \fB@RESET@\fP \- terminal initialization
.SH SYNOPSIS
-\fB@TSET@\fR [\fB\-IQVcqrsw\fR] [\fB\-\fR] [\fB\-e\fR \fIch\fR] [\fB\-i\fR \fIch\fR] [\fB\-k\fR \fIch\fR] [\fB\-m\fR \fImapping\fR] [\fIterminal\fR]
+\fB@TSET@\fP [\fB\-IQVcqrsw\fP] [\fB\-\fP] [\fB\-e\fP \fIch\fP] [\fB\-i\fP \fIch\fP] [\fB\-k\fP \fIch\fP] [\fB\-m\fP \fImapping\fP] [\fIterminal\fP]
.br
-\fB@RESET@\fR [\fB\-IQVcqrsw\fR] [\fB\-\fR] [\fB\-e\fR \fIch\fR] [\fB\-i\fR \fIch\fR] [\fB\-k\fR \fIch\fR] [\fB\-m\fR \fImapping\fR] [\fIterminal\fR]
+\fB@RESET@\fP [\fB\-IQVcqrsw\fP] [\fB\-\fP] [\fB\-e\fP \fIch\fP] [\fB\-i\fP \fIch\fP] [\fB\-k\fP \fIch\fP] [\fB\-m\fP \fImapping\fP] [\fIterminal\fP]
.SH DESCRIPTION
.SS tset - initialization
This program initializes terminals.
.PP
-First, \fB@TSET@\fR retrieves the current terminal mode settings
+First, \fB@TSET@\fP retrieves the current terminal mode settings
for your terminal.
It does this by successively testing
.bP
Next, \fB@TSET@\fP determines the type of terminal that you are using.
This determination is done as follows, using the first terminal type found.
.PP
-1. The \fBterminal\fR argument specified on the command line.
+1. The \fBterminal\fP argument specified on the command line.
.PP
-2. The value of the \fBTERM\fR environmental variable.
+2. The value of the \fBTERM\fP environmental variable.
.PP
3. (BSD systems only.) The terminal type associated with the standard
-error output device in the \fI/etc/ttys\fR file.
+error output device in the \fI/etc/ttys\fP file.
(On System\-V-like UNIXes and systems using that convention,
-\fIgetty\fR does this job by setting
-\fBTERM\fR according to the type passed to it by \fI/etc/inittab\fR.)
+\fBgetty\fP(1) does this job by setting
+\fBTERM\fP according to the type passed to it by \fI/etc/inittab\fP.)
.PP
4. The default terminal type, \*(``unknown\*(''.
.PP
-If the terminal type was not specified on the command-line, the \fB\-m\fR
+If the terminal type was not specified on the command-line, the \fB\-m\fP
option mappings are then applied (see the section
.B TERMINAL TYPE MAPPING
for more information).
Then, if the terminal type begins with a question mark (\*(``?\*(''), the
-user is prompted for confirmation of the terminal type. An empty
+user is prompted for confirmation of the terminal type.
+An empty
response confirms the type, or, another type can be entered to specify
a new type.
Once the terminal type has been determined,
standard error output.
.SS reset - reinitialization
.PP
-When invoked as \fB@RESET@\fR, \fB@TSET@\fR sets the terminal
+When invoked as \fB@RESET@\fP, \fB@TSET@\fP sets the terminal
modes to \*(``sane\*('' values:
.bP
sets cooked and echo modes,
.bP
you may have to type
.sp
- \fI<LF>\fP\fB@RESET@\fP\fI<LF>\fP
+ \fI<LF>\fB@RESET@\fI<LF>\fR
.sp
(the line-feed character is normally control-J) to get the terminal
to work, as carriage-return may no longer work in the abnormal state.
.bP
Also, the terminal will often not echo the command.
-.SH OPTIONS
+.SH OPTIONS
.PP
The options are as follows:
.TP 5
.B \-c
Set control characters and modes.
.TP 5
-.B \-e
-Set the erase character to \fIch\fR.
+.BI \-e\ ch
+Set the erase character to \fIch\fP.
.TP
.B \-I
Do not send the terminal or tab initialization strings to the terminal.
.TP
-.B \-i
-Set the interrupt character to \fIch\fR.
+.BI \-i\ ch
+Set the interrupt character to \fIch\fP.
.TP
-.B \-k
-Set the line kill character to \fIch\fR.
+.BI \-k\ ch
+Set the line kill character to \fIch\fP.
.TP
-.B \-m
+.BI \-m\ mapping
Specify a mapping from a port type to a terminal.
See the section
.B TERMINAL TYPE MAPPING
.TP
.B \-Q
Do not display any values for the erase, interrupt and line kill characters.
-Normally \fB@TSET@\fR displays the values for control characters which
+Normally \fB@TSET@\fP displays the values for control characters which
differ from the system's default values.
.TP
.B \-q
.TP
.B \-s
Print the sequence of shell commands to initialize the environment variable
-\fBTERM\fR to the standard output.
+\fBTERM\fP to the standard output.
See the section
.B SETTING THE ENVIRONMENT
for details.
Normally this has no effect,
unless \fBsetupterm\fP is not able to detect the window size.
.PP
-The arguments for the \fB\-e\fR, \fB\-i\fR, and \fB\-k\fR
+The arguments for the \fB\-e\fP, \fB\-i\fP, and \fB\-k\fP
options may either be entered as actual characters
or by using the \*(``hat\*(''
notation, i.e., control-h may be specified as \*(``^H\*('' or \*(``^h\*(''.
.SH SETTING THE ENVIRONMENT
It is often desirable to enter the terminal type and information about
the terminal's capabilities into the shell's environment.
-This is done using the \fB\-s\fR option.
-.PP
-When the \fB\-s\fR option is specified, the commands to enter the information
-into the shell's environment are written to the standard output. If
-the \fBSHELL\fR environmental variable ends in \*(``csh\*('', the commands
-are for \fBcsh\fR, otherwise, they are for \fBsh\fR.
-Note, the \fBcsh\fR commands set and unset the shell variable
-\fBnoglob\fR, leaving it unset. The following line in the \fB.login\fR
-or \fB.profile\fR files will initialize the environment correctly:
+This is done using the \fB\-s\fP option.
+.PP
+When the \fB\-s\fP option is specified, the commands to enter the information
+into the shell's environment are written to the standard output.
+If
+the \fBSHELL\fP environmental variable ends in \*(``csh\*('', the commands
+are for \fBcsh\fP, otherwise, they are for \fBsh\fP(1).
+Note, the \fBcsh\fP commands set and unset the shell variable
+\fBnoglob\fP, leaving it unset.
+The following line in the \fB.login\fP
+or \fB.profile\fP files will initialize the environment correctly:
.sp
eval \`@TSET@ \-s options ... \`
.
.SH TERMINAL TYPE MAPPING
When the terminal is not hardwired into the system (or the current
system information is incorrect) the terminal type derived from the
-\fI/etc/ttys\fR file or the \fBTERM\fR environmental variable is often
-something generic like \fBnetwork\fR, \fBdialup\fR, or \fBunknown\fR.
-When \fB@TSET@\fR is used in a startup script it is often desirable to
+\fI/etc/ttys\fP file or the \fBTERM\fP environmental variable is often
+something generic like \fBnetwork\fP, \fBdialup\fP, or \fBunknown\fP.
+When \fB@TSET@\fP is used in a startup script it is often desirable to
provide information about the type of terminal used on such ports.
.PP
-The \fB\-m\fR options maps
+The \fB\-m\fP options maps
from some set of conditions to a terminal type, that is, to
-tell \fB@TSET@\fR
+tell \fB@TSET@\fP
\*(``If I'm on this port at a particular speed,
guess that I'm on that kind of terminal\*(''.
.PP
-The argument to the \fB\-m\fR option consists of an optional port type, an
+The argument to the \fB\-m\fP option consists of an optional port type, an
optional operator, an optional baud rate specification, an optional
-colon (\*(``:\*('') character and a terminal type. The port type is a
+colon (\*(``:\*('') character and a terminal type.
+The port type is a
string (delimited by either the operator or the colon character).
The operator may be any combination of
\*(``>\*('',
of the standard error output (which should be the control terminal).
The terminal type is a string.
.PP
-If the terminal type is not specified on the command line, the \fB\-m\fR
-mappings are applied to the terminal type. If the port type and baud
+If the terminal type is not specified on the command line, the \fB\-m\fP
+mappings are applied to the terminal type.
+If the port type and baud
rate match the mapping, the terminal type specified in the mapping
-replaces the current type. If more than one mapping is specified, the
+replaces the current type.
+If more than one mapping is specified, the
first applicable mapping is used.
.PP
-For example, consider the following mapping: \fBdialup>9600:vt100\fR.
+For example, consider the following mapping: \fBdialup>9600:vt100\fP.
The port type is dialup , the operator is >, the baud rate
-specification is 9600, and the terminal type is vt100. The result of
-this mapping is to specify that if the terminal type is \fBdialup\fR,
+specification is 9600, and the terminal type is vt100.
+The result of
+this mapping is to specify that if the terminal type is \fBdialup\fP,
and the baud rate is greater than 9600 baud, a terminal type of
-\fBvt100\fR will be used.
+\fBvt100\fP will be used.
.PP
If no baud rate is specified, the terminal type will match any baud rate.
If no port type is specified, the terminal type will match any port type.
-For example, \fB\-m dialup:vt100 \-m :?xterm\fR
+For example, \fB\-m dialup:vt100 \-m :?xterm\fP
will cause any dialup port, regardless of baud rate, to match the terminal
type vt100, and any non-dialup port type to match the terminal type ?xterm.
Note, because of the leading question mark, the user will be
queried on a default port as to whether they are actually using an xterm
terminal.
.PP
-No whitespace characters are permitted in the \fB\-m\fR option argument.
+No whitespace characters are permitted in the \fB\-m\fP option argument.
Also, to avoid problems with meta-characters, it is suggested that the
-entire \fB\-m\fR option argument be placed within single quote characters,
-and that \fBcsh\fR users insert a backslash character (\*(``\e\*('') before
+entire \fB\-m\fP option argument be placed within single quote characters,
+and that \fBcsh\fP users insert a backslash character (\*(``\e\*('') before
any exclamation marks (\*(``!\*('').
.SH HISTORY
.PP
-A \fBreset\fP command appeared in 2BSD (April 1979), written by Kurt Shoens.
+A \fBreset\fP command appeared in 1BSD (March 1978), written by Kurt Shoens.
This program set the \fIerase\fP and \fIkill\fP characters
to \fB^H\fP (backspace) and \fB@\fP respectively.
Mark Horton improved that in 3BSD (October 1979), adding
\fIintr\fP, \fIquit\fP, \fIstart\fP/\fIstop\fP and \fIeof\fP characters
as well as changing the program to avoid modifying any user settings.
+That version of \fBreset\fP did not use the termcap database.
.PP
-Later in 4.1BSD (December 1980),
-Mark Horton added a call to the \fBtset\fP program
-using the \fB\-I\fP and \fB\-Q\fP options, i.e.,
-using that to improve the terminal modes.
-With those options,
-that version of \fBreset\fP did not use the termcap database.
-.PP
-A separate \fBtset\fP command was provided in 2BSD by Eric Allman.
-While the oldest published source (from 1979)
-provides both \fBtset\fP and \fBreset\fP,
-Allman's comments in the 2BSD source code indicate
+A separate \fBtset\fP command was provided in 1BSD by Eric Allman,
+using the termcap database.
+Allman's comments in the source code indicate
that he began work in October 1977,
continuing development over the next few years.
.PP
-In September 1980, Eric Allman modified \fBtset\fP,
-adding the code from the existing \*(``reset\*(''
-feature when \fBtset\fP was invoked as \fBreset\fP.
-Rather than simply copying the existing program,
-in this merged version, \fBtset\fP used the termcap database
-to do additional (re)initialization of the terminal.
+According to comments in the source code,
+the \fBtset\fP program was modified in September 1980,
+to use logic copied from the 3BSD \*(``reset\*(''
+when it was invoked as \fBreset\fP.
This version appeared in 4.1cBSD, late in 1982.
.PP
Other developers (e.g., Keith Bostic and Jim Bloom)
continued to modify \fBtset\fP until 4.4BSD was released in 1993.
.PP
-The \fBncurses\fR implementation
+The \fBncurses\fP implementation
was lightly adapted from the 4.4BSD sources for a terminfo environment by Eric
S. Raymond <esr@snark.thyrsus.com>.
.SH COMPATIBILITY
In fact, the commonly-used \fBreset\fP utility
is always an alias for \fBtset\fP.
.PP
-The \fB@TSET@\fR utility provides for backward-compatibility with BSD
-environments (under most modern UNIXes, \fB/etc/inittab\fR and \fBgetty\fR(1)
-can set \fBTERM\fR appropriately for each dial-up line; this obviates what was
-\fB@TSET@\fR's most important use). This implementation behaves like 4.4BSD
+The \fB@TSET@\fP utility provides for backward-compatibility with BSD
+environments (under most modern UNIXes, \fB/etc/inittab\fP and \fBgetty\fP(1)
+can set \fBTERM\fP appropriately for each dial-up line; this obviates what was
+\fB@TSET@\fP's most important use).
+This implementation behaves like 4.4BSD
\fBtset\fP, with a few exceptions specified here.
.PP
A few options are different
-because the \fBTERMCAP\fR variable
-is no longer supported under terminfo-based \fBncurses\fR:
+because the \fBTERMCAP\fP variable
+is no longer supported under terminfo-based \fBncurses\fP:
.bP
-The \fB\-S\fR option of BSD \fBtset\fP no longer works;
+The \fB\-S\fP option of BSD \fBtset\fP no longer works;
it prints an error message to the standard error and dies.
.bP
-The \fB\-s\fR option only sets \fBTERM\fR, not \fBTERMCAP\fP.
+The \fB\-s\fP option only sets \fBTERM\fP, not \fBTERMCAP\fP.
.PP
There was an undocumented 4.4BSD feature
that invoking \fBtset\fP via a link named
set the terminal to use upper-case only.
This feature has been omitted.
.PP
-The \fB\-A\fR, \fB\-E\fR, \fB\-h\fR, \fB\-u\fR and \fB\-v\fR
-options were deleted from the \fB@TSET@\fR
+The \fB\-A\fP, \fB\-E\fP, \fB\-h\fP, \fB\-u\fP and \fB\-v\fP
+options were deleted from the \fB@TSET@\fP
utility in 4.4BSD.
None of them were documented in 4.3BSD and all are
of limited utility at best.
-The \fB\-a\fR, \fB\-d\fR, and \fB\-p\fR options are similarly
+The \fB\-a\fP, \fB\-d\fP, and \fB\-p\fP options are similarly
not documented or useful, but were retained as they appear to be in
-widespread use. It is strongly recommended that any usage of these
-three options be changed to use the \fB\-m\fR option instead.
-The \fB\-a\fP, \fB\-d\fP, and \fB\-p\fR options
+widespread use.
+It is strongly recommended that any usage of these
+three options be changed to use the \fB\-m\fP option instead.
+The \fB\-a\fP, \fB\-d\fP, and \fB\-p\fP options
are therefore omitted from the usage summary above.
.PP
Very old systems, e.g., 3BSD, used a different terminal driver which
\fB\-n\fP option to specify that the new terminal driver should be used.
This implementation does not provide that choice.
.PP
-It is still permissible to specify the \fB\-e\fR, \fB\-i\fR,
-and \fB\-k\fR options without arguments,
+It is still permissible to specify the \fB\-e\fP, \fB\-i\fP,
+and \fB\-k\fP options without arguments,
although it is strongly recommended that such usage be fixed to
explicitly specify the character.
.PP
As of 4.4BSD,
-executing \fB@TSET@\fR as \fB@RESET@\fR no longer implies the \fB\-Q\fR option.
-Also, the interaction between the \- option and the \fIterminal\fR
-argument in some historic implementations of \fB@TSET@\fR has been removed.
+executing \fB@TSET@\fP as \fB@RESET@\fP no longer implies the \fB\-Q\fP option.
+Also, the interaction between the \- option and the \fIterminal\fP
+argument in some historic implementations of \fB@TSET@\fP has been removed.
.PP
The \fB\-c\fP and \fB\-w\fP options are not found in earlier implementations.
However, a different window size-change feature was provided in 4.4BSD.
to set the window size if \fBtset\fP is not able to obtain the window
size from the operating system.
.bP
-In ncurses, \fB@TSET@\fR obtains the window size using
+In ncurses, \fB@TSET@\fP obtains the window size using
\fBsetupterm\fP, which may be from
the operating system,
the \fBLINES\fP and \fBCOLUMNS\fP environment variables or
those variables must be recomputed and reassigned.
To do this more easily, use the \fBresize\fP(1) program.
.SH ENVIRONMENT
-The \fB@TSET@\fR command uses these environment variables:
+The \fB@TSET@\fP command uses these environment variables:
.TP 5
SHELL
-tells \fB@TSET@\fP whether to initialize \fBTERM\fP using \fBsh\fP or
-\fBcsh\fP syntax.
+tells \fB@TSET@\fP whether to initialize \fBTERM\fP using \fBsh\fP(1) or
+\fBcsh\fP(1) syntax.
.TP 5
TERM
Denotes your terminal type.
\fBenviron\fP(7)
.hy
.PP
-This describes \fBncurses\fR
+This describes \fBncurses\fP
version @NCURSES_MAJOR@.@NCURSES_MINOR@ (patch @NCURSES_PATCH@).