X-Git-Url: https://ncurses.scripts.mit.edu/?a=blobdiff_plain;ds=inline;f=doc%2Fhtml%2Fman%2Fncurses.3x.html;h=b0d5a18876e8821923c7e2bebd9ea5da41a7ca55;hb=56f1e8cd80dfb926f74e1739bf969489b0cfa56f;hp=bc36dbc93df27cccc10feb34c10d454f823d9dc7;hpb=32f9f5f12cd9159261f9db228461049e8c770404;p=ncurses.git diff --git a/doc/html/man/ncurses.3x.html b/doc/html/man/ncurses.3x.html index bc36dbc9..b0d5a188 100644 --- a/doc/html/man/ncurses.3x.html +++ b/doc/html/man/ncurses.3x.html @@ -1,7 +1,7 @@ @@ -46,24 +46,21 @@ - -
+
ncurses - CRT screen handling and optimization package --
+
#include <curses.h> --
+
The ncurses library routines give the user a terminal- independent method of updating character screens with rea- sonable optimization. This implementation is "new curses" (ncurses) and is the approved replacement for 4.4BSD clas- sic curses, which has been discontinued. This describes - ncurses version 6.0 (patch 20150718). + ncurses version 6.0 (patch 20160521). The ncurses library emulates the curses library of System V Release 4 UNIX, and XPG4 (X/Open Portability Guide) @@ -96,6 +93,8 @@ lation; use of soft label keys; terminfo capabilities; and access to low-level terminal-manipulation routines. + +
The library uses the locale which the calling program has initialized. That is normally done with setlocale: @@ -131,6 +130,8 @@ TERM has been exported. tset(1) is usually responsible for doing this. [See terminfo(5) for further details.] + +
The ncurses library permits manipulation of data struc- tures, called windows, which can be thought of as two- dimensional arrays of characters representing all or part @@ -175,6 +176,8 @@ characters, and input values use names, defined in <curses.h>, such as A_REVERSE, ACS_HLINE, and KEY_LEFT. + +
If the environment variables LINES and COLUMNS are set, or if the program is executing in a window environment, line and column information in the environment will override @@ -215,8 +218,7 @@ curscr can be used in only a few routines. --
+
Many curses routines have two or more versions. The rou- tines prefixed with w require a window argument. The rou- tines prefixed with p require a pad argument. Those with- @@ -248,63 +250,59 @@ any configuration of the library. There are two common configurations of the library: - ncurses - the "normal" library, which handles 8-bit - characters. The normal (8-bit) library stores - characters combined with attributes in chtype - data. - - Attributes alone (no corresponding character) - may be stored in chtype or the equivalent - attr_t data. In either case, the data is - stored in something like an integer. - - Each cell (row and column) in a WINDOW is - stored as a chtype. - - ncursesw - the so-called "wide" library, which handles - multibyte characters (see the section on - ALTERNATE CONFIGURATIONS). The "wide" library - includes all of the calls from the "normal" - library. It adds about one third more calls - using data types which store multibyte charac- - ters: - - cchar_t - corresponds to chtype. However it is a - structure, because more data is stored - than can fit into an integer. The char- - acters are large enough to require a full - integer value - and there may be more - than one character per cell. The video - attributes and color are stored in sepa- - rate fields of the structure. - - Each cell (row and column) in a WINDOW is - stored as a cchar_t. - - wchar_t - stores a "wide" character. Like chtype, - this may be an integer. - - wint_t - stores a wchar_t or WEOF - not the same, - though both may have the same size. - - The "wide" library provides new functions - which are analogous to functions in the "nor- - mal" library. There is a naming convention - which relates many of the normal/wide vari- - ants: a "_w" is inserted into the name. For - example, waddch becomes wadd_wch. - - --
+ ncurses + the "normal" library, which handles 8-bit charac- + ters. The normal (8-bit) library stores charac- + ters combined with attributes in chtype data. + + Attributes alone (no corresponding character) may + be stored in chtype or the equivalent attr_t data. + In either case, the data is stored in something + like an integer. + + Each cell (row and column) in a WINDOW is stored + as a chtype. + + ncursesw + the so-called "wide" library, which handles multi- + byte characters (see the section on ALTERNATE CON- + FIGURATIONS). The "wide" library includes all of + the calls from the "normal" library. It adds + about one third more calls using data types which + store multibyte characters: + + cchar_t + corresponds to chtype. However it is a + structure, because more data is stored than + can fit into an integer. The characters are + large enough to require a full integer value + - and there may be more than one character + per cell. The video attributes and color are + stored in separate fields of the structure. + + Each cell (row and column) in a WINDOW is + stored as a cchar_t. + + wchar_t + stores a "wide" character. Like chtype, this + may be an integer. + + wint_t + stores a wchar_t or WEOF - not the same, + though both may have the same size. + + The "wide" library provides new functions which + are analogous to functions in the "normal" + library. There is a naming convention which + relates many of the normal/wide variants: a "_w" + is inserted into the name. For example, waddch + becomes wadd_wch. + + +
The following table lists each curses routine and the name - of the manual page on which it is described. Routines - flagged with `*' are ncurses-specific, not described by + of the manual page on which it is described. Routines + flagged with `*' are ncurses-specific, not described by XPG4 or present in SVr4. curses Routine Name Manual Page Name @@ -314,10 +312,10 @@ _nc_free_and_exit curs_memleaks(3x)* _nc_freeall curs_memleaks(3x)* _nc_tracebits curs_trace(3x)* - _traceattr curs_trace(3x)* _traceattr2 curs_trace(3x)* _tracechar curs_trace(3x)* + _tracechtype curs_trace(3x)* _tracechtype2 curs_trace(3x)* _tracedump curs_trace(3x)* @@ -380,11 +378,11 @@ echochar curs_addch(3x) endwin curs_initscr(3x) erase curs_clear(3x) - erasechar curs_termattrs(3x) erasewchar curs_termattrs(3x) filter curs_util(3x) flash curs_beep(3x) + flushinp curs_util(3x) get_wch curs_get_wch(3x) get_wstr curs_get_wstr(3x) @@ -446,14 +444,16 @@ is_cleared curs_opaque(3x)* is_idcok curs_opaque(3x)* is_idlok curs_opaque(3x)* - is_immedok curs_opaque(3x)* is_keypad curs_opaque(3x)* is_leaveok curs_opaque(3x)* is_linetouched curs_touch(3x) is_nodelay curs_opaque(3x)* + is_notimeout curs_opaque(3x)* + is_pad curs_opaque(3x)* is_scrollok curs_opaque(3x)* + is_subwin curs_opaque(3x)* is_syncok curs_opaque(3x)* is_term_resized resizeterm(3x)* is_wintouched curs_touch(3x) @@ -512,11 +512,11 @@ mvinsstr curs_insstr(3x) mvinstr curs_instr(3x) mvinwstr curs_inwstr(3x) - mvprintw curs_printw(3x) mvscanw curs_scanw(3x) mvvline curs_border(3x) mvvline_set curs_border_set(3x) + mvwadd_wch curs_add_wch(3x) mvwadd_wchnstr curs_add_wchstr(3x) mvwadd_wchstr curs_add_wchstr(3x) @@ -578,16 +578,17 @@ pnoutrefresh curs_pad(3x) prefresh curs_pad(3x) printw curs_printw(3x) - putp curs_terminfo(3x) putwin curs_util(3x) qiflush curs_inopts(3x) raw curs_inopts(3x) redrawwin curs_refresh(3x) + refresh curs_refresh(3x) reset_prog_mode curs_kernel(3x) reset_shell_mode curs_kernel(3x) resetty curs_kernel(3x) + resize_term resizeterm(3x)* resizeterm resizeterm(3x)* restartterm curs_terminfo(3x) ripoffline curs_kernel(3x) @@ -640,15 +641,16 @@ tigetflag curs_terminfo(3x) tigetnum curs_terminfo(3x) tigetstr curs_terminfo(3x) + tiparm curs_terminfo(3x)* timeout curs_inopts(3x) touchline curs_touch(3x) touchwin curs_touch(3x) tparm curs_terminfo(3x) - tputs curs_termcap(3x) tputs curs_terminfo(3x) trace curs_trace(3x)* typeahead curs_inopts(3x) + unctrl curs_util(3x) unget_wch curs_get_wch(3x) ungetch curs_getch(3x) @@ -708,11 +710,14 @@ wget_wstr curs_get_wstr(3x) wgetbkgrnd curs_bkgrnd(3x) wgetch curs_getch(3x) + wgetdelay curs_opaque(3x)* wgetn_wstr curs_get_wstr(3x) wgetnstr curs_getstr(3x) - + wgetparent curs_opaque(3x)* + wgetscrreg curs_opaque(3x)* wgetstr curs_getstr(3x) whline curs_border(3x) + whline_set curs_border_set(3x) win_wch curs_in_wch(3x) win_wchnstr curs_in_wchstr(3x) @@ -753,439 +758,439 @@ wvline_set curs_border_set(3x) --
- Routines that return an integer return ERR upon failure - and an integer value other than ERR upon successful com- - pletion, unless otherwise noted in the routine descrip- +
+ Routines that return an integer return ERR upon failure + and an integer value other than ERR upon successful com- + pletion, unless otherwise noted in the routine descrip- tions. As a general rule, routines check for null pointers passed as parameters, and handle this as an error. - All macros return the value of the w version, except + All macros return the value of the w version, except setscrreg, wsetscrreg, getyx, getbegyx, and getmaxyx. The - return values of setscrreg, wsetscrreg, getyx, getbegyx, + return values of setscrreg, wsetscrreg, getyx, getbegyx, and getmaxyx are undefined (i.e., these should not be used as the right-hand side of assignment statements). Routines that return pointers return NULL on error. --
+
The following environment symbols are useful for customiz- ing the runtime behavior of the ncurses library. The most important ones have been already discussed in detail. - CC When set, change occurrences of the command_character - (i.e., the cmdch capability) of the loaded terminfo - entries to the value of this variable. Very few ter- - minfo entries provide this feature. - - Because this name is also used in development envi- - ronments to represent the C compiler's name, ncurses - ignores it if it does not happen to be a single char- - acter. - - BAUDRATE - The debugging library checks this environment vari- - able when the application has redirected output to a - file. The variable's numeric value is used for the - baudrate. If no value is found, ncurses uses 9600. - This allows testers to construct repeatable test- - cases that take into account costs that depend on - baudrate. - - COLUMNS - Specify the width of the screen in characters. - Applications running in a windowing environment usu- - ally are able to obtain the width of the window in - which they are executing. If neither the COLUMNS - value nor the terminal's screen size is available, - ncurses uses the size which may be specified in the - terminfo database (i.e., the cols capability). - - It is important that your application use a correct - size for the screen. This is not always possible - because your application may be running on a host - which does not honor NAWS (Negotiations About Window - Size), or because you are temporarily running as - another user. However, setting COLUMNS and/or LINES - overrides the library's use of the screen size - obtained from the operating system. - - Either COLUMNS or LINES symbols may be specified - independently. This is mainly useful to circumvent - legacy misfeatures of terminal descriptions, e.g., - xterm which commonly specifies a 65 line screen. For - best results, lines and cols should not be specified - in a terminal description for terminals which are run - as emulations. - - Use the use_env function to disable all use of exter- - nal environment (but not including system calls) to - determine the screen size. Use the use_tioctl func- - tion to update COLUMNS or LINES to match the screen - size obtained from system calls or the terminal data- - base. - - ESCDELAY - Specifies the total time, in milliseconds, for which - ncurses will await a character sequence, e.g., a - function key. The default value, 1000 milliseconds, - is enough for most uses. However, it is made a vari- - able to accommodate unusual applications. - - The most common instance where you may wish to change - this value is to work with slow hosts, e.g., running - on a network. If the host cannot read characters - rapidly enough, it will have the same effect as if - the terminal did not send characters rapidly enough. - The library will still see a timeout. - - Note that xterm mouse events are built up from char- - acter sequences received from the xterm. If your - application makes heavy use of multiple-clicking, you - may wish to lengthen this default value because the - timeout applies to the composed multi-click event as - well as the individual clicks. - - In addition to the environment variable, this imple- - mentation provides a global variable with the same - name. Portable applications should not rely upon the - presence of ESCDELAY in either form, but setting the - environment variable rather than the global variable - does not create problems when compiling an applica- - tion. - - HOME Tells ncurses where your home directory is. That is - where it may read and write auxiliary terminal - descriptions: - - $HOME/.termcap - $HOME/.terminfo - - LINES - Like COLUMNS, specify the height of the screen in - characters. See COLUMNS for a detailed description. - - MOUSE_BUTTONS_123 - This applies only to the OS/2 EMX port. It specifies - the order of buttons on the mouse. OS/2 numbers a - 3-button mouse inconsistently from other platforms: - - 1 = left - 2 = right - 3 = middle. - - This variable lets you customize the mouse. The - variable must be three numeric digits 1-3 in any - order, e.g., 123 or 321. If it is not specified, - ncurses uses 132. - - NCURSES_ASSUMED_COLORS - Override the compiled-in assumption that the termi- - nal's default colors are white-on-black (see - default_colors(3x)). You may set the foreground and - background color values with this environment vari- - able by proving a 2-element list: foreground,back- - ground. For example, to tell ncurses to not assume - anything about the colors, set this to "-1,-1". To - make it green-on-black, set it to "2,0". Any posi- - tive value from zero to the terminfo max_colors value - is allowed. - - NCURSES_CONSOLE2 - This applies only to the MinGW port of ncurses. - - The Console2 program's handling of the Microsoft Con- - sole API call CreateConsoleScreenBuffer is defective. - Applications which use this will hang. However, it - is possible to simulate the action of this call by - mapping coordinates, explicitly saving and restoring - the original screen contents. Setting the environ- - ment variable NCGDB has the same effect. - - NCURSES_GPM_TERMS - This applies only to ncurses configured to use the - GPM interface. - - If present, the environment variable is a list of one - or more terminal names against which the TERM envi- - ronment variable is matched. Setting it to an empty - value disables the GPM interface; using the built-in - support for xterm, etc. - - If the environment variable is absent, ncurses will - attempt to open GPM if TERM contains "linux". - - NCURSES_NO_HARD_TABS - Ncurses may use tabs as part of the cursor movement - optimization. In some cases, your terminal driver - may not handle these properly. Set this environment - variable to disable the feature. You can also adjust - your stty settings to avoid the problem. - - NCURSES_NO_MAGIC_COOKIE - Some terminals use a magic-cookie feature which - requires special handling to make highlighting and - other video attributes display properly. You can - suppress the highlighting entirely for these termi- - nals by setting this environment variable. - - NCURSES_NO_PADDING - Most of the terminal descriptions in the terminfo - database are written for real "hardware" terminals. - Many people use terminal emulators which run in a - windowing environment and use curses-based applica- - tions. Terminal emulators can duplicate all of the - important aspects of a hardware terminal, but they do - not have the same limitations. The chief limitation - of a hardware terminal from the standpoint of your - application is the management of dataflow, i.e., tim- - ing. Unless a hardware terminal is interfaced into a - terminal concentrator (which does flow control), it - (or your application) must manage dataflow, prevent- - ing overruns. The cheapest solution (no hardware - cost) is for your program to do this by pausing after - operations that the terminal does slowly, such as - clearing the display. - - As a result, many terminal descriptions (including - the vt100) have delay times embedded. You may wish - to use these descriptions, but not want to pay the - performance penalty. - - Set the NCURSES_NO_PADDING environment variable to - disable all but mandatory padding. Mandatory padding - is used as a part of special control sequences such - as flash. - - NCURSES_NO_SETBUF - This setting is obsolete. Before changes - - o started with 5.9 patch 20120825 and - - o continued though 5.9 patch 20130126 - - ncurses enabled buffered output during terminal ini- - tialization. This was done (as in SVr4 curses) for - performance reasons. For testing purposes, both of - ncurses and certain applications, this feature was - made optional. Setting the NCURSES_NO_SETBUF vari- - able disabled output buffering, leaving the output in - the original (usually line buffered) mode. - - In the current implementation, ncurses performs its - own buffering and does not require this workaround. - It does not modify the buffering of the standard out- - put. - - The reason for the change was to make the behavior - for interrupts and other signals more robust. One - drawback is that certain nonconventional programs - would mix ordinary stdio calls with ncurses calls and - (usually) work. This is no longer possible since - ncurses is not using the buffered standard output but - its own output (to the same file descriptor). As a - special case, the low-level calls such as putp still - use the standard output. But high-level curses calls - do not. - - NCURSES_NO_UTF8_ACS - During initialization, the ncurses library checks for - special cases where VT100 line-drawing (and the cor- - responding alternate character set capabilities) - described in the terminfo are known to be missing. - Specifically, when running in a UTF-8 locale, the - Linux console emulator and the GNU screen program - ignore these. Ncurses checks the TERM environment - variable for these. For other special cases, you - should set this environment variable. Doing this - tells ncurses to use Unicode values which correspond - to the VT100 line-drawing glyphs. That works for the - special cases cited, and is likely to work for termi- - nal emulators. - - When setting this variable, you should set it to a - nonzero value. Setting it to zero (or to a nonnum- - ber) disables the special check for "linux" and - "screen". - - As an alternative to the environment variable, - ncurses checks for an extended terminfo capability - U8. This is a numeric capability which can be com- - piled using tic -x. For example - - # linux console, if patched to provide working - # VT100 shift-in/shift-out, with corresponding font. - linux-vt100|linux console with VT100 line-graphics, - U8#0, use=linux, - - # uxterm with vt100Graphics resource set to false - xterm-utf8|xterm relying on UTF-8 line-graphics, - U8#1, use=xterm, - - The name "U8" is chosen to be two characters, to per- - mit it to be used by applications that use ncurses' - termcap interface. - - NCURSES_TRACE - During initialization, the ncurses debugging library - checks the NCURSES_TRACE environment variable. If it - is defined, to a numeric value, ncurses calls the - trace function, using that value as the argument. - - The argument values, which are defined in curses.h, - provide several types of information. When running - with traces enabled, your application will write the - file trace to the current directory. - - TERM Denotes your terminal type. Each terminal type is - distinct, though many are similar. - - TERM is commonly set by terminal emulators to help - applications find a workable terminal description. - Some of those choose a popular approximation, e.g., - "ansi", "vt100", "xterm" rather than an exact fit. - Not infrequently, your application will have problems - with that approach, e.g., incorrect function-key def- - initions. - - If you set TERM in your environment, it has no effect - on the operation of the terminal emulator. It only - affects the way applications work within the termi- - nal. Likewise, as a general rule (xterm being a rare - exception), terminal emulators which allow you to - specify TERM as a parameter or configuration value do - not change their behavior to match that setting. - - TERMCAP - If the ncurses library has been configured with term- - cap support, ncurses will check for a terminal's - description in termcap form if it is not available in - the terminfo database. - - The TERMCAP environment variable contains either a - terminal description (with newlines stripped out), or - a file name telling where the information denoted by - the TERM environment variable exists. In either - case, setting it directs ncurses to ignore the usual - place for this information, e.g., /etc/termcap. - - TERMINFO - Overrides the directory in which ncurses searches for - your terminal description. This is the simplest, but - not the only way to change the list of directories. - The complete list of directories in order follows: - - o the last directory to which ncurses wrote, if - any, is searched first - - o the directory specified by the TERMINFO environ- - ment variable - - o $HOME/.terminfo - - o directories listed in the TERMINFO_DIRS environ- - ment variable - - o one or more directories whose names are config- - ured and compiled into the ncurses library, i.e., - - o /usr/local/ncurses/share/ter- - minfo:/usr/share/terminfo (corresponding to - the TERMINFO_DIRS variable) - - o /usr/share/terminfo (corresponding to the - TERMINFO variable) - - TERMINFO_DIRS - Specifies a list of directories to search for termi- - nal descriptions. The list is separated by colons - (i.e., ":") on Unix, semicolons on OS/2 EMX. - - All of the terminal descriptions are in terminfo - form. Normally these are stored in a directory tree, - using subdirectories named by the first letter of the - terminal names therein. - - If ncurses is built with a hashed database, then each - entry in this list can also be the path of the corre- - sponding database file. - - If ncurses is built with a support for reading term- - cap files directly, then an entry in this list may be - the path of a termcap file. - - TERMPATH - If TERMCAP does not hold a file name then ncurses - checks the TERMPATH environment variable. This is a - list of filenames separated by spaces or colons - (i.e., ":") on Unix, semicolons on OS/2 EMX. - - If the TERMPATH environment variable is not set, - ncurses looks in the files /etc/termcap, - /usr/share/misc/termcap and $HOME/.termcap, in that - order. + CC + When set, change occurrences of the command_character + (i.e., the cmdch capability) of the loaded terminfo + entries to the value of this variable. Very few terminfo + entries provide this feature. + + Because this name is also used in development environments + to represent the C compiler's name, ncurses ignores it if + it does not happen to be a single character. + + +
+ The debugging library checks this environment variable + when the application has redirected output to a file. The + variable's numeric value is used for the baudrate. If no + value is found, ncurses uses 9600. This allows testers to + construct repeatable test-cases that take into account + costs that depend on baudrate. + + +
+ Specify the width of the screen in characters. Applica- + tions running in a windowing environment usually are able + to obtain the width of the window in which they are exe- + cuting. If neither the COLUMNS value nor the terminal's + screen size is available, ncurses uses the size which may + be specified in the terminfo database (i.e., the cols + capability). + + It is important that your application use a correct size + for the screen. This is not always possible because your + application may be running on a host which does not honor + NAWS (Negotiations About Window Size), or because you are + temporarily running as another user. However, setting + COLUMNS and/or LINES overrides the library's use of the + screen size obtained from the operating system. + + Either COLUMNS or LINES symbols may be specified indepen- + dently. This is mainly useful to circumvent legacy mis- + features of terminal descriptions, e.g., xterm which com- + monly specifies a 65 line screen. For best results, lines + and cols should not be specified in a terminal description + for terminals which are run as emulations. + + Use the use_env function to disable all use of external + environment (but not including system calls) to determine + the screen size. Use the use_tioctl function to update + COLUMNS or LINES to match the screen size obtained from + system calls or the terminal database. + + +
+ Specifies the total time, in milliseconds, for which + ncurses will await a character sequence, e.g., a function + key. The default value, 1000 milliseconds, is enough for + most uses. However, it is made a variable to accommodate + unusual applications. + + The most common instance where you may wish to change this + value is to work with slow hosts, e.g., running on a net- + work. If the host cannot read characters rapidly enough, + it will have the same effect as if the terminal did not + send characters rapidly enough. The library will still + see a timeout. + + Note that xterm mouse events are built up from character + sequences received from the xterm. If your application + makes heavy use of multiple-clicking, you may wish to + lengthen this default value because the timeout applies to + the composed multi-click event as well as the individual + clicks. + + In addition to the environment variable, this implementa- + tion provides a global variable with the same name. Por- + table applications should not rely upon the presence of + ESCDELAY in either form, but setting the environment vari- + able rather than the global variable does not create prob- + lems when compiling an application. + + +
+ Tells ncurses where your home directory is. That is where + it may read and write auxiliary terminal descriptions: + + $HOME/.termcap + $HOME/.terminfo + + +
+ Like COLUMNS, specify the height of the screen in charac- + ters. See COLUMNS for a detailed description. + + +
+ This applies only to the OS/2 EMX port. It specifies the + order of buttons on the mouse. OS/2 numbers a 3-button + mouse inconsistently from other platforms: + + 1 = left + 2 = right + 3 = middle. + + This variable lets you customize the mouse. The variable + must be three numeric digits 1-3 in any order, e.g., 123 + or 321. If it is not specified, ncurses uses 132. + + +
+ Override the compiled-in assumption that the terminal's + default colors are white-on-black (see default_col- + ors(3x)). You may set the foreground and background color + values with this environment variable by proving a 2-ele- + ment list: foreground,background. For example, to tell + ncurses to not assume anything about the colors, set this + to "-1,-1". To make it green-on-black, set it to "2,0". + Any positive value from zero to the terminfo max_colors + value is allowed. + + +
+ This applies only to the MinGW port of ncurses. + + The Console2 program's handling of the Microsoft Console + API call CreateConsoleScreenBuffer is defective. Applica- + tions which use this will hang. However, it is possible + to simulate the action of this call by mapping coordi- + nates, explicitly saving and restoring the original screen + contents. Setting the environment variable NCGDB has the + same effect. + + +
+ This applies only to ncurses configured to use the GPM + interface. + + If present, the environment variable is a list of one or + more terminal names against which the TERM environment + variable is matched. Setting it to an empty value dis- + ables the GPM interface; using the built-in support for + xterm, etc. + + If the environment variable is absent, ncurses will + attempt to open GPM if TERM contains "linux". + + +
+ Ncurses may use tabs as part of the cursor movement opti- + mization. In some cases, your terminal driver may not + handle these properly. Set this environment variable to + disable the feature. You can also adjust your stty set- + tings to avoid the problem. NCURSES_NO_MAGIC_COOKIE Some + terminals use a magic-cookie feature which requires spe- + cial handling to make highlighting and other video + attributes display properly. You can suppress the high- + lighting entirely for these terminals by setting this + environment variable. + + +
+ Most of the terminal descriptions in the terminfo database + are written for real "hardware" terminals. Many people + use terminal emulators which run in a windowing environ- + ment and use curses-based applications. Terminal emula- + tors can duplicate all of the important aspects of a hard- + ware terminal, but they do not have the same limitations. + The chief limitation of a hardware terminal from the + standpoint of your application is the management of + dataflow, i.e., timing. Unless a hardware terminal is + interfaced into a terminal concentrator (which does flow + control), it (or your application) must manage dataflow, + preventing overruns. The cheapest solution (no hardware + cost) is for your program to do this by pausing after + operations that the terminal does slowly, such as clearing + the display. + + As a result, many terminal descriptions (including the + vt100) have delay times embedded. You may wish to use + these descriptions, but not want to pay the performance + penalty. + + Set the NCURSES_NO_PADDING environment variable to disable + all but mandatory padding. Mandatory padding is used as a + part of special control sequences such as flash. + + +
+ This setting is obsolete. Before changes + + o started with 5.9 patch 20120825 and + + o continued though 5.9 patch 20130126 + + ncurses enabled buffered output during terminal initial- + ization. This was done (as in SVr4 curses) for perfor- + mance reasons. For testing purposes, both of ncurses and + certain applications, this feature was made optional. + Setting the NCURSES_NO_SETBUF variable disabled output + buffering, leaving the output in the original (usually + line buffered) mode. + + In the current implementation, ncurses performs its own + buffering and does not require this workaround. It does + not modify the buffering of the standard output. + + The reason for the change was to make the behavior for + interrupts and other signals more robust. One drawback is + that certain nonconventional programs would mix ordinary + stdio calls with ncurses calls and (usually) work. This + is no longer possible since ncurses is not using the + buffered standard output but its own output (to the same + file descriptor). As a special case, the low-level calls + such as putp still use the standard output. But high- + level curses calls do not. + + +
+ During initialization, the ncurses library checks for spe- + cial cases where VT100 line-drawing (and the corresponding + alternate character set capabilities) described in the + terminfo are known to be missing. Specifically, when run- + ning in a UTF-8 locale, the Linux console emulator and the + GNU screen program ignore these. Ncurses checks the TERM + environment variable for these. For other special cases, + you should set this environment variable. Doing this + tells ncurses to use Unicode values which correspond to + the VT100 line-drawing glyphs. That works for the special + cases cited, and is likely to work for terminal emulators. + + When setting this variable, you should set it to a nonzero + value. Setting it to zero (or to a nonnumber) disables + the special check for "linux" and "screen". + + As an alternative to the environment variable, ncurses + checks for an extended terminfo capability U8. This is a + numeric capability which can be compiled using tic -x. + For example + + # linux console, if patched to provide working + # VT100 shift-in/shift-out, with corresponding font. + linux-vt100|linux console with VT100 line-graphics, + U8#0, use=linux, + + # uxterm with vt100Graphics resource set to false + xterm-utf8|xterm relying on UTF-8 line-graphics, + U8#1, use=xterm, + + The name "U8" is chosen to be two characters, to permit it + to be used by applications that use ncurses' termcap + interface. + + +
+ During initialization, the ncurses debugging library + checks the NCURSES_TRACE environment variable. If it is + defined, to a numeric value, ncurses calls the trace func- + tion, using that value as the argument. + + The argument values, which are defined in curses.h, pro- + vide several types of information. When running with + traces enabled, your application will write the file trace + to the current directory. + + See curs_trace(3x) for more information. + + +
+ Denotes your terminal type. Each terminal type is dis- + tinct, though many are similar. + + TERM is commonly set by terminal emulators to help appli- + cations find a workable terminal description. Some of + those choose a popular approximation, e.g., "ansi", + "vt100", "xterm" rather than an exact fit. Not infre- + quently, your application will have problems with that + approach, e.g., incorrect function-key definitions. + + If you set TERM in your environment, it has no effect on + the operation of the terminal emulator. It only affects + the way applications work within the terminal. Likewise, + as a general rule (xterm being a rare exception), terminal + emulators which allow you to specify TERM as a parameter + or configuration value do not change their behavior to + match that setting. + + +
+ If the ncurses library has been configured with termcap + support, ncurses will check for a terminal's description + in termcap form if it is not available in the terminfo + database. + + The TERMCAP environment variable contains either a termi- + nal description (with newlines stripped out), or a file + name telling where the information denoted by the TERM + environment variable exists. In either case, setting it + directs ncurses to ignore the usual place for this infor- + mation, e.g., /etc/termcap. + + +
+ Overrides the directory in which ncurses searches for your + terminal description. This is the simplest, but not the + only way to change the list of directories. The complete + list of directories in order follows: + + o the last directory to which ncurses wrote, if any, + is searched first + + o the directory specified by the TERMINFO environment + variable + + o $HOME/.terminfo + + o directories listed in the TERMINFO_DIRS environment + variable + + o one or more directories whose names are configured + and compiled into the ncurses library, i.e., + + o /usr/local/ncurses/share/ter- + minfo:/usr/share/terminfo (corresponding to the + TERMINFO_DIRS variable) + + o /usr/share/terminfo (corresponding to the TER- + MINFO variable) + + +
+ Specifies a list of directories to search for terminal + descriptions. The list is separated by colons (i.e., ":") + on Unix, semicolons on OS/2 EMX. + + All of the terminal descriptions are in terminfo form. + Normally these are stored in a directory tree, using sub- + directories named by the first letter of the terminal + names therein. + + If ncurses is built with a hashed database, then each + entry in this list can also be the path of the correspond- + ing database file. + + If ncurses is built with a support for reading termcap + files directly, then an entry in this list may be the path + of a termcap file. + + +
+ If TERMCAP does not hold a file name then ncurses checks + the TERMPATH environment variable. This is a list of + filenames separated by spaces or colons (i.e., ":") on + Unix, semicolons on OS/2 EMX. + + If the TERMPATH environment variable is not set, ncurses + looks in the files /etc/termcap, /usr/share/misc/termcap + and $HOME/.termcap, in that order. The library may be configured to disregard the following variables when the current user is the superuser (root), or if the application uses setuid or setgid permissions: - $TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as - $HOME. + $TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as $HOME. --
- Several different configurations are possible, depending - on the configure script options used when building - ncurses. There are a few main options whose effects are +
+ Several different configurations are possible, depending + on the configure script options used when building + ncurses. There are a few main options whose effects are visible to the applications developer using ncurses: --disable-overwrite - The standard include for ncurses is as noted in SYN- + The standard include for ncurses is as noted in SYN- OPSIS: - #include <curses.h> + #include <curses.h> - This option is used to avoid filename conflicts when - ncurses is not the main implementation of curses of - the computer. If ncurses is installed disabling - overwrite, it puts its headers in a subdirectory, + This option is used to avoid filename conflicts when + ncurses is not the main implementation of curses of + the computer. If ncurses is installed disabling + overwrite, it puts its headers in a subdirectory, e.g., - #include <ncurses/curses.h> + #include <ncurses/curses.h> - It also omits a symbolic link which would allow you + It also omits a symbolic link which would allow you to use -lcurses to build executables. --enable-widec - The configure script renames the library and (if the - --disable-overwrite option is used) puts the header + The configure script renames the library and (if the + --disable-overwrite option is used) puts the header files in a different subdirectory. All of the - library names have a "w" appended to them, i.e., + library names have a "w" appended to them, i.e., instead of - -lncurses + -lncurses you link with - -lncursesw + -lncursesw You must also define _XOPEN_SOURCE_EXTENDED when com- - piling for the wide-character library to use the - extended (wide-character) functions. The curses.h - file which is installed for the wide-character - library is designed to be compatible with the normal + piling for the wide-character library to use the + extended (wide-character) functions. The curses.h + file which is installed for the wide-character + library is designed to be compatible with the normal library's header. Only the size of the WINDOW struc- - ture differs, and very few applications require more - than a pointer to WINDOWs. If the headers are - installed allowing overwrite, the wide-character - library's headers should be installed last, to allow - applications to be built using either library from + ture differs, and very few applications require more + than a pointer to WINDOWs. If the headers are + installed allowing overwrite, the wide-character + library's headers should be installed last, to allow + applications to be built using either library from the same set of headers. --with-pthread @@ -1193,10 +1198,10 @@ library names have a "t" appended to them (before any "w" added by --enable-widec). - The global variables such as LINES are replaced by - macros to allow read-only access. At the same time, - setter-functions are provided to set these values. - Some applications (very few) may require changes to + The global variables such as LINES are replaced by + macros to allow read-only access. At the same time, + setter-functions are provided to set these values. + Some applications (very few) may require changes to work with this convention. --with-shared @@ -1206,153 +1211,147 @@ --with-debug --with-profile - The shared and normal (static) library names differ - by their suffixes, e.g., libncurses.so and libn- - curses.a. The debug and profiling libraries add a + The shared and normal (static) library names differ + by their suffixes, e.g., libncurses.so and libn- + curses.a. The debug and profiling libraries add a "_g" and a "_p" to the root names respectively, e.g., libncurses_g.a and libncurses_p.a. --with-trace - The trace function normally resides in the debug + The trace function normally resides in the debug library, but it is sometimes useful to configure this - in the shared library. Configure scripts should + in the shared library. Configure scripts should check for the function's existence rather than assum- ing it is always in the debug library. --
+
/usr/share/tabset - directory containing initialization files for the + directory containing initialization files for the terminal capability database /usr/share/terminfo ter- minal capability database --
- terminfo(5) and related pages whose names begin "curs_" +
+ terminfo(5) and related pages whose names begin "curs_" for detailed routine descriptions. curs_variables(3x) --
+
The ncurses library can be compiled with an option (-DUSE_GETCAP) that falls back to the old-style /etc/term- cap file if the terminal setup code cannot find a terminfo - entry corresponding to TERM. Use of this feature is not - recommended, as it essentially includes an entire termcap - compiler in the ncurses startup code, at significant cost + entry corresponding to TERM. Use of this feature is not + recommended, as it essentially includes an entire termcap + compiler in the ncurses startup code, at significant cost in core and startup cycles. - The ncurses library includes facilities for capturing - mouse events on certain terminals (including xterm). See + The ncurses library includes facilities for capturing + mouse events on certain terminals (including xterm). See the curs_mouse(3x) manual page for details. - The ncurses library includes facilities for responding to - window resizing events, e.g., when running in an xterm. - See the resizeterm(3x) and wresize(3x) manual pages for - details. In addition, the library may be configured with + The ncurses library includes facilities for responding to + window resizing events, e.g., when running in an xterm. + See the resizeterm(3x) and wresize(3x) manual pages for + details. In addition, the library may be configured with a SIGWINCH handler. - The ncurses library extends the fixed set of function key - capabilities of terminals by allowing the application - designer to define additional key sequences at runtime. + The ncurses library extends the fixed set of function key + capabilities of terminals by allowing the application + designer to define additional key sequences at runtime. See the define_key(3x) key_defined(3x), and keyok(3x) man- ual pages for details. The ncurses library can exploit the capabilities of termi- - nals which implement the ISO-6429 SGR 39 and SGR 49 con- + nals which implement the ISO-6429 SGR 39 and SGR 49 con- trols, which allow an application to reset the terminal to - its original foreground and background colors. From the - users' perspective, the application is able to draw col- - ored text on a background whose color is set indepen- - dently, providing better control over color contrasts. + its original foreground and background colors. From the + users' perspective, the application is able to draw col- + ored text on a background whose color is set indepen- + dently, providing better control over color contrasts. See the default_colors(3x) manual page for details. - The ncurses library includes a function for directing - application output to a printer attached to the terminal + The ncurses library includes a function for directing + application output to a printer attached to the terminal device. See the curs_print(3x) manual page for details. --
- The ncurses library is intended to be BASE-level confor- +
+ The ncurses library is intended to be BASE-level confor- mant with XSI Curses. The EXTENDED XSI Curses functional- ity (including color support) is supported. - A small number of local differences (that is, individual - differences between the XSI Curses and ncurses calls) are - described in PORTABILITY sections of the library man + A small number of local differences (that is, individual + differences between the XSI Curses and ncurses calls) are + described in PORTABILITY sections of the library man pages. - Unlike other implementations, this one checks parameters - such as pointers to WINDOW structures to ensure they are - not null. The main reason for providing this behavior is + Unlike other implementations, this one checks parameters + such as pointers to WINDOW structures to ensure they are + not null. The main reason for providing this behavior is to guard against programmer error. The standard interface does not provide a way for the library to tell an applica- - tion which of several possible errors were detected. - Relying on this (or some other) extension will adversely + tion which of several possible errors were detected. + Relying on this (or some other) extension will adversely affect the portability of curses applications. This implementation also contains several extensions: - o The routine has_key is not part of XPG4, nor is it - present in SVr4. See the curs_getch(3x) manual page + o The routine has_key is not part of XPG4, nor is it + present in SVr4. See the curs_getch(3x) manual page for details. - o The routine slk_attr is not part of XPG4, nor is it + o The routine slk_attr is not part of XPG4, nor is it present in SVr4. See the curs_slk(3x) manual page for details. o The routines getmouse, mousemask, ungetmouse, mousein- terval, and wenclose relating to mouse interfacing are - not part of XPG4, nor are they present in SVr4. See + not part of XPG4, nor are they present in SVr4. See the curs_mouse(3x) manual page for details. - o The routine mcprint was not present in any previous - curses implementation. See the curs_print(3x) manual + o The routine mcprint was not present in any previous + curses implementation. See the curs_print(3x) manual page for details. - o The routine wresize is not part of XPG4, nor is it - present in SVr4. See the wresize(3x) manual page for + o The routine wresize is not part of XPG4, nor is it + present in SVr4. See the wresize(3x) manual page for details. - o The WINDOW structure's internal details can be hidden - from application programs. See curs_opaque(3x) for + o The WINDOW structure's internal details can be hidden + from application programs. See curs_opaque(3x) for the discussion of is_scrollok, etc. o This implementation can be configured to provide rudi- - mentary support for multi-threaded applications. See + mentary support for multi-threaded applications. See curs_threads(3x) for details. - o This implementation can also be configured to provide + o This implementation can also be configured to provide a set of functions which improve the ability to manage multiple screens. See curs_sp_funcs(3x) for details. - In historic curses versions, delays embedded in the capa- + In historic curses versions, delays embedded in the capa- bilities cr, ind, cub1, ff and tab activated corresponding - delay bits in the UNIX tty driver. In this implementa- - tion, all padding is done by sending NUL bytes. This - method is slightly more expensive, but narrows the inter- - face to the UNIX kernel significantly and increases the + delay bits in the UNIX tty driver. In this implementa- + tion, all padding is done by sending NUL bytes. This + method is slightly more expensive, but narrows the inter- + face to the UNIX kernel significantly and increases the package's portability correspondingly. --
- The header file <curses.h> automatically includes the +
+ The header file <curses.h> automatically includes the header files <stdio.h> and <unctrl.h>. - If standard output from a ncurses program is re-directed - to something which is not a tty, screen updates will be + If standard output from a ncurses program is re-directed + to something which is not a tty, screen updates will be directed to standard error. This was an undocumented fea- ture of AT&T System V Release 3 curses. --
- Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey. +
+ Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey. Based on pcurses by Pavel Curtis. @@ -1365,12 +1364,37 @@