X-Git-Url: https://ncurses.scripts.mit.edu/?a=blobdiff_plain;f=doc%2Fhtml%2Fman%2Fcurs_terminfo.3x.html;h=3e964ef5bc2bda6d75d0f1bf5956cffd2240f38c;hb=c3b21f65a2687f3894a0d3217006c23f162c893a;hp=4163fbb781f651839b57f4ac67088b8d811a62b0;hpb=46722468f47c2b77b3987729b4bcf2321cccfd01;p=ncurses.git diff --git a/doc/html/man/curs_terminfo.3x.html b/doc/html/man/curs_terminfo.3x.html index 4163fbb7..3e964ef5 100644 --- a/doc/html/man/curs_terminfo.3x.html +++ b/doc/html/man/curs_terminfo.3x.html @@ -1,7 +1,6 @@ - +
+ +- +curs_terminfo(3x) curs_terminfo(3x) --
- del_curterm, mvcur, putp, restartterm, set_curterm, set- - term, setupterm, tigetflag, tigetnum, tigetstr, tparm, - tputs, vid_attr, vid_puts, vidattr, vidputs - curses - interfaces to terminfo database --
+ +
+ del_curterm, mvcur, putp, restartterm, set_curterm, + setterm, setupterm, tigetflag, tigetnum, tigetstr, tiparm, + tparm, tputs, vid_attr, vid_puts, vidattr, vidputs - + curses interfaces to terminfo database + + +
#include <curses.h> #include <term.h> @@ -58,78 +65,100 @@ int setterm(char *term); TERMINAL *set_curterm(TERMINAL *nterm); int del_curterm(TERMINAL *oterm); - int restartterm(const char *term, int fildes, int *errret); + int restartterm(char *term, int fildes, int *errret); char *tparm(char *str, ...); int tputs(const char *str, int affcnt, int (*putc)(int)); int putp(const char *str); int vidputs(chtype attrs, int (*putc)(int)); int vidattr(chtype attrs); - int vid_puts(attr_t attrs, short pair, void *opts, int (*putc)(char)); + int vid_puts(attr_t attrs, short pair, void *opts, int (*putc)(int)); int vid_attr(attr_t attrs, short pair, void *opts); int mvcur(int oldrow, int oldcol, int newrow, int newcol); int tigetflag(char *capname); int tigetnum(char *capname); char *tigetstr(char *capname); + char *tiparm(const char *str, ...); --
+
These low-level routines must be called by programs that have to deal directly with the terminfo database to handle certain terminal capabilities, such as programming func- tion keys. For all other functionality, curses routines are more suitable and their use is recommended. - Initially, setupterm should be called. Note that - setupterm is automatically called by initscr and newterm. + +
+ Initially, setupterm should be called. Note that se- + tupterm is automatically called by initscr and newterm. This defines the set of terminal-dependent variables - [listed in terminfo(5)]. The terminfo variables lines and - columns are initialized by setupterm as follows: If - use_env(FALSE) has been called, values for lines and - columns specified in terminfo are used. Otherwise, if the - environment variables LINES and COLUMNS exist, their val- - ues are used. If these environment variables do not exist - and the program is running in a window, the current window - size is used. Otherwise, if the environment variables do - not exist, the values for lines and columns specified in - the terminfo database are used. - - The header files curses.h and term.h should be included - (in this order) to get the definitions for these strings, - numbers, and flags. Parameterized strings should be - passed through tparm to instantiate them. All terminfo - strings [including the output of tparm] should be printed - with tputs or putp. Call the reset_shell_mode to restore - the tty modes before exiting [see curs_kernel(3x)]. Pro- - grams which use cursor addressing should output - enter_ca_mode upon startup and should output exit_ca_mode - before exiting. Programs desiring shell escapes should - call - - reset_shell_mode and output exit_ca_mode before the shell - is called and should output enter_ca_mode and call - reset_prog_mode after returning from the shell. + [listed in terminfo(5)]. + + Each initialization routine provides applications with the + terminal capabilities either directly (via header defini- + tions), or by special functions. The header files curs- + es.h and term.h should be included (in this order) to get + the definitions for these strings, numbers, and flags. + + The terminfo variables lines and columns are initialized + by setupterm as follows: + + o If use_env(FALSE) has been called, values for lines + and columns specified in terminfo are used. + + o Otherwise, if the environment variables LINES and COL- + UMNS exist, their values are used. If these environ- + ment variables do not exist and the program is running + in a window, the current window size is used. Other- + wise, if the environment variables do not exist, the + values for lines and columns specified in the terminfo + database are used. + + Parameterized strings should be passed through tparm to + instantiate them. All terminfo strings [including the + output of tparm] should be printed with tputs or putp. + Call reset_shell_mode to restore the tty modes before ex- + iting [see curs_kernel(3x)]. + + Programs which use cursor addressing should + + o output enter_ca_mode upon startup and + + o output exit_ca_mode before exiting. + + Programs which execute shell subprocesses should + + o call reset_shell_mode and output exit_ca_mode before + the shell is called and + + o output enter_ca_mode and call reset_prog_mode after + returning from the shell. The setupterm routine reads in the terminfo database, ini- tializing the terminfo structures, but does not set up the output virtualization structures used by curses. The ter- - minal type is the character string term; if term is null, - the environment variable TERM is used. All output is to - file descriptor fildes which is initialized for output. - If errret is not null, then setupterm returns OK or ERR - and stores a status value in the integer pointed to by - errret. A return value of OK combined with status of 1 in + minal type is the character string term; if term is null, + the environment variable TERM is used. All output is to + file descriptor fildes which is initialized for output. + If errret is not null, then setupterm returns OK or ERR + and stores a status value in the integer pointed to by er- + rret. A return value of OK combined with status of 1 in errret is normal. If ERR is returned, examine errret: - 1 means that the terminal is hardcopy, cannot be - used for curses applications. + 1 means that the terminal is hardcopy, cannot be used + for curses applications. + + setupterm determines if the entry is a hardcopy type + by checking the hc (hardcopy) capability. - 0 means that the terminal could not be found, or - that it is a generic type, having too little - information for curses applications to run. + 0 means that the terminal could not be found, or that + it is a generic type, having too little information + for curses applications to run. - -1 means that the terminfo database could not be - found. + setupterm determines if the entry is a generic type + by checking the gn (generic) capability. + + -1 means that the terminfo database could not be found. If errret is null, setupterm prints an error message upon finding an error and exits. Thus, the simplest call is: @@ -139,46 +168,74 @@ which uses all the defaults and sends the output to std- out. - The setterm routine is being replaced by setupterm. The - call: + The setterm routine was replaced by setupterm. The call: setupterm(term, 1, (int *)0) - provides the same functionality as setterm(term). The - setterm routine is included here for BSD compatibility, - and is not recommended for new programs. + provides the same functionality as setterm(term). The + setterm routine is provided for BSD compatibility, and is + not recommended for new programs. + - The set_curterm routine sets the variable cur_term to - nterm, and makes all of the terminfo boolean, numeric, and - string variables use the values from nterm. It returns - the old value of cur_term. +
+ The setupterm routine stores its information about the + terminal in a TERMINAL structure pointed to by the global + variable cur_term. If it detects an error, or decides + that the terminal is unsuitable (hardcopy or generic), it + discards this information, making it not available to ap- + plications. + + If setupterm is called repeatedly for the same terminal + type, it will reuse the information. It maintains only + one copy of a given terminal's capabilities in memory. If + it is called for different terminal types, setupterm allo- + cates new storage for each set of terminal capabilities. + + The set_curterm routine sets cur_term to nterm, and makes + all of the terminfo boolean, numeric, and string variables + use the values from nterm. It returns the old value of + cur_term. The del_curterm routine frees the space pointed to by oterm and makes it available for further use. If oterm is the same as cur_term, references to any of the terminfo - boolean, numeric, and string variables thereafter may - refer to invalid memory locations until another setupterm + boolean, numeric, and string variables thereafter may re- + fer to invalid memory locations until another setupterm has been called. The restartterm routine is similar to setupterm and initscr, except that it is called after restoring memory to a previous state (for example, when reloading a game - saved as a core image dump). It assumes that the windows - and the input and output options are the same as when mem- - ory was saved, but the terminal type and baud rate may be - different. Accordingly, it saves various tty state bits, - does a setupterm, and then restores the bits. + saved as a core image dump). restartterm assumes that the + windows and the input and output options are the same as + when memory was saved, but the terminal type and baud rate + may be different. Accordingly, restartterm saves various + tty state bits, calls setupterm, and then restores the + bits. + +
The tparm routine instantiates the string str with parame- - ters pi. A pointer is returned to the result of str with + ters pi. A pointer is returned to the result of str with the parameters applied. - The tputs routine applies padding information to the - string str and outputs it. The str must be a terminfo - string variable or the return value from tparm, tgetstr, - or tgoto. affcnt is the number of lines affected, or 1 if - not applicable. putc is a putchar-like routine to which - the characters are passed, one at a time. + tiparm is a newer form of tparm which uses <stdarg.h> + rather than a fixed-parameter list. Its numeric parame- + ters are integers (int) rather than longs. + + +
+ The tputs routine applies padding information to the + string str and outputs it: + + o The str must be a terminfo string variable or the re- + turn value from tparm, tgetstr, or tgoto. + + o affcnt is the number of lines affected, or 1 if not + applicable. + + o putc is a putchar-like routine to which the characters + are passed, one at a time. The putp routine calls tputs(str, 1, putchar). Note that the output of putp always goes to stdout, not to the @@ -203,132 +260,192 @@ that argument. The mvcur routine provides low-level cursor motion. It - takes effect immediately (rather than at the next - refresh). - - The tigetflag, tigetnum and tigetstr routines return the - value of the capability corresponding to the terminfo - capname passed to them, such as xenl. - - The tigetflag routine returns the value -1 if capname is - not a boolean capability, or 0 if it is canceled or absent - from the terminal description. - - The tigetnum routine returns the value -2 if capname is - not a numeric capability, or -1 if it is canceled or - absent from the terminal description. + takes effect immediately (rather than at the next re- + fresh). - The tigetstr routine returns the value (char *)-1 if cap- - name is not a string capability, or 0 if it is canceled or - absent from the terminal description. - The capname for each capability is given in the table col- - umn entitled capname code in the capabilities section of - terminfo(5). - - char *boolnames, *boolcodes, *boolfnames - - char *numnames, *numcodes, *numfnames - - char *strnames, *strcodes, *strfnames - - These null-terminated arrays contain the capnames, the - termcap codes, and the full C names, for each of the ter- - minfo variables. - - --
- Routines that return an integer return ERR upon failure - and OK (SVr4 only specifies "an integer value other than - ERR") upon successful completion, unless otherwise noted - in the preceding routine descriptions. - - Routines that return pointers always return NULL on error. +
+ The tigetflag, tigetnum and tigetstr routines return the + value of the capability corresponding to the terminfo cap- + name passed to them, such as xenl. The capname for each + capability is given in the table column entitled capname + code in the capabilities section of terminfo(5). + These routines return special values to denote errors. --
- The setupterm routine should be used in place of setterm. - It may be useful when you want to test for terminal capa- - bilities without committing to the allocation of storage - involved in initscr. + The tigetflag routine returns - Note that vidattr and vidputs may be macros. + -1 if capname is not a boolean capability, or + 0 if it is canceled or absent from the terminal de- + scription. --
- The function setterm is not described in the XSI Curses - standard and must be considered non-portable. All other - functions are as described in the XSI curses standard. + The tigetnum routine returns - In System V Release 4, set_curterm has an int return type - and returns OK or ERR. We have chosen to implement the - XSI Curses semantics. + -2 if capname is not a numeric capability, or - In System V Release 4, the third argument of tputs has the - type int (*putc)(char). + -1 if it is canceled or absent from the terminal de- + scription. - The XSI Curses standard prototypes tparm with a fixed num- - ber of parameters, rather than a variable argument list. - This implementation uses a variable argument list. - Portable applications should provide 9 parameters after - the format; zeroes are fine for this purpose. + The tigetstr routine returns - XSI notes that after calling mvcur, the curses state may - not match the actual terminal state, and that an applica- - tion should touch and refresh the window before resuming - normal curses calls. Both ncurses and System V Release 4 - curses implement mvcur using the SCREEN data allocated in - either initscr or newterm. So though it is documented as - a terminfo function, mvcur is really a curses function - which is not well specified. + (char *)-1 + if capname is not a string capability, or + 0 if it is canceled or absent from the terminal de- + scription. --
- curses(3x), curs_initscr(3x), curs_kernel(3x), curs_term- - cap(3x), putc(3S), terminfo(5) +
+ These null-terminated arrays contain the short terminfo + names ("codes"), the termcap names, and the long terminfo + names ("fnames") for each of the predefined terminfo vari- + ables: + char *boolnames[], *boolcodes[], *boolfnames[] + char *numnames[], *numcodes[], *numfnames[] + char *strnames[], *strcodes[], *strfnames[] +
+ Routines that return an integer return ERR upon failure + and OK (SVr4 only specifies "an integer value other than + ERR") upon successful completion, unless otherwise noted + in the preceding routine descriptions. + Routines that return pointers always return NULL on error. + X/Open defines no error conditions. In this implementa- + tion + del_curterm + returns an error if its terminal parameter is + null. + putp calls tputs, returning the same error-codes. + restartterm + returns an error if the associated call to se- + tupterm returns an error. + setupterm + returns an error if it cannot allocate enough + memory, or create the initial windows (stdscr, + curscr, newscr). Other error conditions are + documented above. + tputs + returns an error if the string parameter is + null. It does not detect I/O errors: X/Open + states that tputs ignores the return value of + the output function putc. +
+ X/Open notes that vidattr and vidputs may be macros. + The function setterm is not described by X/Open and must + be considered non-portable. All other functions are as + described by X/Open. + setupterm copies the terminal name to the array ttytype. + This is not part of X/Open Curses, but is assumed by some + applications. + If configured to use the terminal-driver, e.g., for the + MinGW port, + o setupterm interprets a missing/empty TERM variable as + the special value "unknown". + o setupterm allows explicit use of the the windows con- + sole driver by checking if $TERM is set to "#win32con" + or an abbreviation of that string. + Older versions of ncurses assumed that the file descriptor + passed to setupterm from initscr or newterm uses buffered + I/O, and would write to the corresponding stream. In ad- + dition to the limitation that the terminal was left in + block-buffered mode on exit (like System V curses), it was + problematic because ncurses did not allow a reliable way + to cleanup on receiving SIGTSTP. The current version uses + output buffers managed directly by ncurses. Some of the + low-level functions described in this manual page write to + the standard output. They are not signal-safe. The high- + level functions in ncurses use alternate versions of these + functions using the more reliable buffering scheme. + In System V Release 4, set_curterm has an int return type + and returns OK or ERR. We have chosen to implement the + X/Open Curses semantics. + In System V Release 4, the third argument of tputs has the + type int (*putc)(char). + At least one implementation of X/Open Curses (Solaris) re- + turns a value other than OK/ERR from tputs. That returns + the length of the string, and does no error-checking. + X/Open Curses prototypes tparm with a fixed number of pa- + rameters, rather than a variable argument list. This im- + plementation uses a variable argument list, but can be + configured to use the fixed-parameter list. Portable ap- + plications should provide 9 parameters after the format; + zeroes are fine for this purpose. + In response to comments by Thomas E. Dickey, X/Open Curses + Issue 7 proposed the tiparm function in mid-2009. + X/Open notes that after calling mvcur, the curses state + may not match the actual terminal state, and that an ap- + plication should touch and refresh the window before re- + suming normal curses calls. Both ncurses and System V Re- + lease 4 curses implement mvcur using the SCREEN data allo- + cated in either initscr or newterm. So though it is docu- + mented as a terminfo function, mvcur is really a curses + function which is not well specified. + X/Open states that the old location must be given for + mvcur. This implementation allows the caller to use -1's + for the old ordinates. In that case, the old location is + unknown. + Other implementions may not declare the capability name + arrays. Some provide them without declaring them. X/Open + does not specify them. + Extended terminal capability names, e.g., as defined by + tic -x, are not stored in the arrays described here. +
+ curses(3x), curs_initscr(3x), curs_kernel(3x), curs_term- + cap(3x), curs_variables(3x), term_variables(3x), putc(3), + terminfo(5) + curs_terminfo(3x)-