[ncurses.git] / INSTALL

-------------------------------------------------------------------------------
-- Copyright (c) 1998-2013,2014 Free Software Foundation, Inc.               --
--                                                                           --
-- Permission is hereby granted, free of charge, to any person obtaining a   --
-- copy of this software and associated documentation files (the             --
-- "Software"), to deal in the Software without restriction, including       --
-- without limitation the rights to use, copy, modify, merge, publish,       --
-- distribute, distribute with modifications, sublicense, and/or sell copies --
-- of the Software, and to permit persons to whom the Software is furnished  --
-- to do so, subject to the following conditions:                            --
--                                                                           --
-- The above copyright notice and this permission notice shall be included   --
-- in all copies or substantial portions of the Software.                    --
--                                                                           --
-- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS   --
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF                --
-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN --
-- NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,       --
-- DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR     --
-- OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE --
-- USE OR OTHER DEALINGS IN THE SOFTWARE.                                    --
--                                                                           --
-- Except as contained in this notice, the name(s) of the above copyright    --
-- holders shall not be used in advertising or otherwise to promote the      --
-- sale, use or other dealings in this Software without prior written        --
-- authorization.                                                            --
-------------------------------------------------------------------------------
-- $Id: INSTALL,v 1.172 2014/06/21 18:53:42 tom Exp $
---------------------------------------------------------------------
             How to install Ncurses/Terminfo on your system
---------------------------------------------------------------------

    ************************************************************
    * READ ALL OF THIS FILE BEFORE YOU TRY TO INSTALL NCURSES. *
    ************************************************************

You should be reading the file INSTALL in a directory called ncurses-d.d, where
d.d is the current version number.  There should be several subdirectories,
including `c++', `form', `man', `menu', 'misc', `ncurses', `panel', `progs',
and `test'.  See the README file for a roadmap to the package.

If you are a distribution integrator or packager, please read and act on the
section titled IF YOU ARE A SYSTEM INTEGRATOR below.

If you are converting from BSD curses and do not have root access, be sure
to read the BSD CONVERSION NOTES section below.

If you are trying to build applications using gpm with ncurses,
read the USING NCURSES WITH GPM section below.

If you are running over the Andrew File System see the note below on
USING NCURSES WITH AFS.

If you are cross-compiling, see the note below on BUILDING NCURSES WITH A
CROSS-COMPILER.

If you want to build the Ada95 binding, go to the Ada95 directory and
follow the instructions there.  The Ada95 binding is not covered below.


REQUIREMENTS:
------------

You will need the following to build and install ncurses under UNIX:

        * ANSI C compiler  (gcc, for instance)
        * sh               (bash will do)
        * awk              (mawk or gawk will do)
        * sed
        * BSD or System V style install (a script is enclosed)

Ncurses has been also built in the OS/2 EMX environment.


INSTALLATION PROCEDURE:
----------------------

1.  First, decide whether you want ncurses to replace your existing library (in
    which case you'll need super-user privileges) or be installed in parallel
    with it.

    The --prefix option to configure changes the root directory for installing
    ncurses.  The default is normally in subdirectories of /usr/local, except
    for systems where ncurses is normally installed as a system library (see
    "IF YOU ARE A SYSTEM INTEGRATOR").  Use --prefix=/usr to replace your
    default curses distribution.

    The package gets installed beneath the --prefix directory as follows:

    In $(prefix)/bin:          tic, infocmp, captoinfo, tset,
                                reset, clear, tput, toe, tabs
    In $(prefix)/lib:          libncurses*.* libcurses.a
    In $(prefix)/share/terminfo: compiled terminal descriptions
    In $(prefix)/include:      C header files
    Under $(prefix)/man:       the manual pages

    Note that the configure script attempts to locate previous installation of
    ncurses, and will set the default prefix according to where it finds the
    ncurses headers.

    Do not use commands such as

        make install prefix=XXX

    to change the prefix after configuration, since the prefix value is used
    for some absolute pathnames such as TERMINFO.  Instead do this

        make install DESTDIR=XXX

    See also the discussion of --with-install-prefix.

2.  Type `./configure' in the top-level directory of the distribution to
    configure ncurses for your operating system and create the Makefiles.
    Besides --prefix, various configuration options are available to customize
    the installation; use `./configure --help' to list the available options.

    If your operating system is not supported, read the PORTABILITY section in
    the file ncurses/README for information on how to create a configuration
    file for your system.

    The `configure' script generates makefile rules for one or more object
    models and their associated libraries:

        libncurses.a (normal)

        libcurses.a (normal, a link to libncurses.a)
                This gets left out if you configure with --disable-overwrite.

        libncurses.so (shared)

        libncurses_g.a (debug)

        libncurses_p.a (profile)

        libncurses.la (libtool)

    If you configure using the --enable-widec option, a "w" is appended to the
    library names (e.g., libncursesw.a), and the resulting libraries support
    wide-characters, e.g., via a UTF-8 locale.  The corresponding header files
    are compatible with the non-wide-character configuration; wide-character
    features are provided by ifdef's in the header files.  The wide-character
    library interfaces are not binary-compatible with the non-wide-character
    version.  Building and running the wide-character code relies on a fairly
    recent implementation of libiconv.  We have built this configuration on
    various systems using libiconv, sometimes requiring libutf8.

    If you configure using the --with-pthread option, a "t" is appended to
    the library names (e.g., libncursest.a, libncursestw.a).

    If you do not specify any models, the normal and debug libraries will be
    configured.  Typing `configure' with no arguments is equivalent to:

        ./configure --with-normal --with-debug --enable-overwrite

    Typing

        ./configure --with-shared

    makes the shared libraries the default, resulting in

        ./configure --with-shared --with-normal --with-debug --enable-overwrite

    If you want only shared libraries, type

        ./configure --with-shared --without-normal --without-debug

    Rules for generating shared libraries are highly dependent upon the choice
    of host system and compiler.  We've been testing shared libraries on
    several systems, but more work needs to be done to make shared libraries
    work on other systems.

    If you have libtool installed, you can type

        ./configure --with-libtool

    to generate the appropriate static and/or shared libraries for your
    platform using libtool.

    You can make curses and terminfo fall back to an existing file of termcap
    definitions by configuring with --enable-termcap.  If you do this, the
    library will search /etc/termcap before the terminfo database, and will
    also interpret the contents of the TERM environment variable.  See the
    section BSD CONVERSION NOTES below.

3.  Type `make'.  Ignore any warnings, no error messages should be produced.
    This should compile the ncurses library, the terminfo compiler tic(1),
    captoinfo(1), infocmp(1), toe(1), clear(1) tset(1), reset(1), and tput(1)
    programs (see the manual pages for explanation of what they do), some test
    programs, and the panels, menus, and forms libraries.

4.  Run ncurses and several other test programs in the test directory to
    verify that ncurses functions correctly before doing an install that
    may overwrite system files.  Read the file test/README for details on
    the test programs.

    NOTE: You must have installed the terminfo database, or set the
    environment variable $TERMINFO to point to a SVr4-compatible terminfo
    database before running the test programs.  Not all vendors' terminfo
    databases are SVr4-compatible, but most seem to be.  Exceptions include
    DEC's Digital Unix (formerly known as OSF/1).

    If you run the test programs WITHOUT installing terminfo, ncurses may
    read the termcap file and cache that in $HOME/.terminfo, which will
    thereafter be used instead of the terminfo database.  See the comments
    on "--enable-getcap-cache", to see why this is a Bad Thing.

    It is possible to configure ncurses to use other terminfo database formats.
    A few are provided as examples in the include-directory (see --with-caps).

    The ncurses program is designed specifically to test the ncurses library.
    You can use it to verify that the screen highlights work correctly, that
    cursor addressing and window scrolling works OK, etc.

5.  Once you've tested, you can type `make install' to install libraries,
    the programs, the terminfo database and the manual pages.  Alternately, you
    can type `make install' in each directory you want to install.  In the
    top-level directory, you can do a partial install using these commands:

        'make install.progs'    installs tic, infocmp, etc...
        'make install.includes' installs the headers.
        'make install.libs'     installs the libraries (and the headers).
        'make install.data'     installs the terminfo data. (Note: `tic' must
                                be installed before the terminfo data can be
                                compiled).
        'make install.man'      installs the manual pages.

  ############################################################################
  #     CAVEAT EMPTOR: `install.data' run as root will NUKE any existing     #
  #  terminfo database. If you have any custom or unusual entries SAVE them  #
  #  before you install ncurses.  I have a file called terminfo.custom for   #
  #  this purpose.  Don't forget to run tic on the file once you're done.    #
  ############################################################################

    The terminfo(5) manual page must be preprocessed with tbl(1) before
    being formatted by nroff(1).  Modern man(1) implementations tend to do
    this by default, but you may want to look at your version's manual page
    to be sure.  You may also install the manual pages after preprocessing
    with tbl(1) by specifying the configure option --with-manpage-tbl.

    If the system already has a curses library that you need to keep using
    you'll need to distinguish between it and ncurses.  See the discussion of
    --disable-overwrite.  If ncurses is installed outside the standard
    directories (/usr/include and /usr/lib) then all your users will need to
    use the -I option to compile programs and -L to link them.

    If you have another curses installed in your system and you accidentally
    compile using its curses.h you'll end up with a large number of
    undefined symbols at link time.

    IF YOU DO NOT HAVE ROOT: Change directory to the `progs' subdirectory
    and run the `capconvert' script.  This script will deduce various things
    about your environment and use them to build you a private terminfo tree,
    so you can use ncurses applications.

    If more than one user at your site does this, the space for the duplicate
    trees is wasted.  Try to get your site administrators to install a system-
    wide terminfo tree instead.

    See the BSD CONVERSION NOTES section below for a few more details.

6.  The c++ directory has C++ classes that are built on top of ncurses and
    panels.  You must have c++ (and its libraries) installed before you can
    compile and run the demo.

    Use --without-cxx-binding to tell configure to not build the C++ bindings
    and demo.

    If you do not have C++, you must use the --without-cxx option to tell
    the configure script to not attempt to determine the type of 'bool'
    which may be supported by C++.  IF YOU USE THIS OPTION, BE ADVISED THAT
    YOU MAY NOT BE ABLE TO COMPILE (OR RUN) NCURSES APPLICATIONS WITH C++.


SUMMARY OF CONFIGURE OPTIONS:
----------------------------

    The configure script provides a short list of its options when you type

        ./configure --help

    The --help and several options are common to all configure scripts that are
    generated with autoconf.  Those are all listed before the line

        --enable and --with options recognized:

    The other options are specific to this package.  We list them in alphabetic
    order.

    --disable-assumed-color
        With ncurses 5.1, we introduced a new function, assume_default_colors()
        which allows applications to specify what the default foreground and
        background color are assumed to be.  Most color applications use
        full-screen color; but a few do not color the background.  While the
        assumed values can be overridden by invoking assume_default_colors(),
        you may find it useful to set the assumed values to the pre-5.1
        convention, using this configure option.

    --disable-big-core
        Assume machine has little memory.  The configure script attempts to
        determine if your machine has enough memory (about 6Mb) to compile the
        terminfo database without writing portions to disk.  Some allocators
        return deceptive results, so you may have to override the configure
        script.  Or you may be building tic for a smaller machine.

    --disable-big-strings
        Disable compile-time optimization of predefined tables which puts
        all of their strings into a very long string, to reduce relocation
        overhead.

    --disable-database
        Use only built-in data.  The ncurses libraries normally read terminfo
        and termcap data from disk.  You can configure ncurses to have a
        built-in database, aka "fallback" entries.  Embedded applications may
        have no need for an external database.  Some, but not all of the
        programs are useful in this configuration, e.g., reset and tput versus
        infocmp and tic.

    --disable-db-install
        Do not install the terminal database.  This is used to omit features
        for packages, as done with --without-progs.

    --disable-ext-funcs
        Disable function-extensions.  Configure ncurses without the functions
        that are not specified by XSI.  See ncurses/modules for the exact
        list of library modules that would be suppressed.

    --disable-hashmap
        Compile without hashmap scrolling-optimization code.  This algorithm is
        the default.

    --disable-home-terminfo
        The $HOME/.terminfo directory is normally added to ncurses' search
        list for reading/writing terminfo entries, since that directory is
        more likely writable than the system terminfo database.  Use this
        option to disable the feature altogether.

    --disable-largefile
        Disable compiler flags needed to use large-file interfaces.

    --disable-lib-suffixes
        Suppress the "w", "t" or "tw" suffixes which normally would be added
        to the library names for the --enable-widec and --with-pthread options.

    --disable-libtool-version
        when using --with-libtool, control how the major/minor version numbers
        are used for constructing the library name.

        The default uses the -version-number feature of libtool, which makes
        the library names compatible (though not identical) with the standard
        build using --with-shared.

        Use --disable-libtool-version to use the libtool -version-info feature.
        This corresponds to the setting used before patch 20100515.

    --disable-leaks
        For testing, compile-in code that frees memory that normally would not
        be freed, to simplify analysis of memory-leaks.

        Any implementation of curses must not free the memory associated with
        a screen, since (even after calling endwin()), it must be available
        for use in the next call to refresh().  There are also chunks of
        memory held for performance reasons.  That makes it hard to analyze
        curses applications for memory leaks.  To work around this, build
        a debugging version of the ncurses library which frees those chunks
        which it can, and provides the _nc_free_and_exit() function to free
        the remainder on exit.  The ncurses utility and test programs use this
        feature, e.g., via the ExitProgram() macro.

    --disable-lp64
        The header files will ignore use of the _LP64 symbol to make chtype
        and mmask_t types 32 bits (they may be long on 64-bit hosts, for
        compatibility with older releases).

        NOTE: this is potentially an ABI change, depending on existing
        packages.  The default for this option is "disabled" for ncurses
        ABI 5, and "enabled" for ABI 6.

    --disable-macros
        For testing, use functions rather than macros.  The program will run
        more slowly, but it is simpler to debug.  This defines NCURSES_NOMACROS
        at build time.  See also the --enable-expanded option.

    --disable-overwrite
        If you are installing ncurses on a system which contains another
        development version of curses, or which could be confused by the loader
        for another version, we recommend that you leave out the link to
        -lcurses.  The ncurses library is always available as -lncurses.
        Disabling overwrite also causes the ncurses header files to be
        installed into a subdirectory, e.g., /usr/local/include/ncurses,
        rather than the include directory.  This makes it simpler to avoid
        compile-time conflicts with other versions of curses.h

    --disable-relink
        If --enable-rpath is given, the generated makefiles normally will
        rebuild the libraries during install.  Use this option to simply
        copy whatever the linked produced.

        This option is ignored if --enable-rpath is not given.

    --disable-root-environ
        Compile with environment restriction, so certain environment variables
        are not available when running as root, or via a setuid/setgid
        application.  These are (for example $TERMINFO) those that allow the
        search path for the terminfo or termcap entry to be customized.

    --disable-rpath-hack
        Normally the configure script helps link libraries found in unusual
        places by adding an rpath option to the link command.  If you are
        building packages, this feature may be redundant.  Use this option
        to suppress the feature.

    --disable-scroll-hints
        Compile without scroll-hints code.  This option is ignored when
        hashmap scrolling is configured, which is the default.

    --disable-tic-depends
        When building shared libraries, normally the tic library is linked to
        depend upon the ncurses library (or equivalently, on the tinfo-library
        if the --with-termlib option was given).  The tic- and tinfo-library
        ABIs do not depend on the --enable-widec option.  Some packagers have
        used this to reduce the number of library files which are packaged by
        using only one copy of those libraries.  To make this work properly,
        the tic library must be built without an explicit dependency on the
        underlying library (ncurses vs ncursesw, tinfo vs tinfow).  Use this
        configure option to do that.
        For example
                configure --with-ticlib --with-shared --disable-tic-depends

    --disable-tparm-varargs
        Portable programs should call tparm() using the fixed-length parameter
        list documented in X/Open.  ncurses provides varargs support for this
        function.  Use --disable-tparm-varargs to disable this support.

    --enable-assertions
        For testing, compile-in assertion code.  This is used only for a few
        places where ncurses cannot easily recover by returning an error code.

    --enable-broken_linker
        A few platforms have what we consider a broken linker:  it cannot link
        objects from an archive solely by referring to data objects in those
        files, but requires a function reference.  This configure option
        changes several data references to functions to work around this
        problem.

        NOTE: With ncurses 5.1, this may not be necessary, since we are
        told that some linkers interpret uninitialized global data as a
        different type of reference which behaves as described above.  We have
        explicitly initialized all of the global data to work around the
        problem.

    --enable-bsdpad
        Recognize BSD-style prefix padding.  Some ancient BSD programs (such as
        nethack) call tputs("50") to implement delays.

    --enable-colorfgbg
        Compile with experimental $COLORFGBG code.  That environment variable
        is set by some terminal emulators as a hint to applications, by
        advertising the default foreground and background colors.  During
        initialization, ncurses sets color pair 0 to match this.

    --enable-const
        The curses interface as documented in XSI is rather old, in fact
        including features that precede ANSI C.  The prototypes generally do
        not make effective use of "const".  When using stricter compilers (or
        gcc with appropriate warnings), you may see warnings about the mismatch
        between const and non-const data.  We provide a configure option which
        changes the interfaces to use const - quieting these warnings and
        reflecting the actual use of the parameters more closely.  The ncurses
        library uses the symbol NCURSES_CONST for these instances of const,
        and if you have asked for compiler warnings, will add gcc's const-qual
        warning.  There will still be warnings due to subtle inconsistencies
        in the interface, but at a lower level.

        NOTE: configuring ncurses with this option may detract from the
        portability of your applications by encouraging you to use const in
        places where the XSI curses interface would not allow them.  Similar
        issues arise when porting to SVr4 curses, which uses const in even
        fewer places.

    --enable-echo
        Use the option --disable-echo to make the build-log less verbose by
        suppressing the display of the compile and link commands.  This makes
        it easier to see the compiler warnings.  (You can always use "make -n"
        to see the options that are used).

    --enable-expanded
        For testing, generate functions for certain macros to make them visible
        as such to the debugger.  See also the --disable-macros option.

    --enable-ext-colors
        Extend the cchar_t structure to allow more than 16 colors to be
        encoded.  This applies only to the wide-character (--enable-widec)
        configuration.

        NOTE: using this option will make libraries which are not binary-
        compatible with libncursesw 5.4.  None of the interfaces change, but
        applications which have an array of cchar_t's must be recompiled.

    --enable-ext-mouse
        Modify the encoding of mouse state to make room for a 5th mouse button.
        That allows one to use ncurses with a wheel mouse with xterm or
        similar X terminal emulators.

        NOTE: using this option will make libraries which are not binary-
        compatible with libncursesw 5.4.  None of the interfaces change, but
        applications which have mouse mask mmask_t's must be recompiled.

    --enable-getcap
        Use the 4.4BSD getcap code if available, or a bundled version of it to
        fetch termcap entries.  Entries read in this way cannot use (make
        cross-references to) the terminfo tree, but it is faster than reading
        /etc/termcap.

        If configured for one of the *BSD systems, this automatically uses
        the hashed database system produced using cap_mkdb or similar tools.
        In that case, there is no advantage in using the --enable-getcap-cache
        option.

        See also the --with-hashed-db option.

    --enable-getcap-cache
        Cache translated termcaps under the directory $HOME/.terminfo

        NOTE: this sounds good - it makes ncurses run faster the second time.
        But look where the data comes from - an /etc/termcap containing lots of
        entries that are not up to date.  If you configure with this option and
        forget to install the terminfo database before running an ncurses
        application, you will end up with a hidden terminfo database that
        generally does not support color and will miss some function keys.

    --enable-hard-tabs
        Compile-in cursor-optimization code that uses hard-tabs.  We would make
        this a standard feature except for the concern that the terminfo entry
        may not be accurate, or that your stty settings have disabled the use
        of tabs.

    --enable-interop
        Compile-in experimental interop bindings.  These provide generic types
        for the form-library.

    --enable-mixed-case
        Controls whether the filesystem on which the terminfo database resides
        supports mixed-case filenames (normal for UNIX, but not on other
        systems).  If you do not specify this option, the configure script
        checks the current filesystem.

    --enable-no-padding
        Compile-in support for the $NCURSES_NO_PADDING environment variable,
        which allows you to suppress the effect of non-mandatory padding in
        terminfo entries.  This is the default, unless you have disabled the
        extended functions.

    --enable-pc-files
        If pkg-config is found (see --with-pkg-config), generate ".pc" files
        for each of the libraries, and install them in pkg-config's library
        directory.

    --enable-pthreads-eintr
        add logic in threaded configuration to ensure that a read(2) system
        call can be interrupted for SIGWINCH.

    --enable-reentrant
        Compile experimental configuration which improves reentrant use of the
        library by reducing global and static variables.  This option is also
        set if --with-pthread is used.

        Enabling this option adds a "t" to the library names, except for the
        special case when --enable-weak-symbols is also used.

    --enable-rpath
        Use rpath option when generating shared libraries, and (with some
        restrictions) when linking the corresponding programs.  This originally
        (in 1997) applied mainly to systems using the GNU linker (read the
        manpage).

        More recently it is useful for systems that require special treatment
        shared libraries in "unusual" locations.  The "system" libraries reside
        in directories which are on the loader's default search-path.  While
        you may be able to use workarounds such as the $LD_LIBRARY_PATH
        environment variable, they do not work with setuid applications since
        the LD_LIBRARY_PATH variable would be unset in that situation.

        This option does not apply to --with-libtool, since libtool makes
        extra assumptions about rpath.

    --enable-safe-sprintf
        Compile with experimental safe-sprintf code.  You may consider using
        this if you are building ncurses for a system that has neither
        vsnprintf() or vsprintf().  It is slow, however.

    --enable-sigwinch
        Compile support for ncurses' SIGWINCH handler.  If your application has
        its own SIGWINCH handler, ncurses will not use its own.  The ncurses
        handler causes wgetch() to return KEY_RESIZE when the screen-size
        changes.  This option is the default, unless you have disabled the
        extended functions.

    --enable-signed-char
        The term.h header declares a Booleans[] array typed "char".  But it
        stores signed values there and "char" is not necessarily signed.
        Some packagers choose to alter the type of Booleans[] though this
        is not strictly compatible.  This option allows one to implement this
        alteration without patching the source code.

    --enable-sp-funcs
        Compile-in support for extended functions which accept a SCREEN pointer,
        reducing the need for juggling the global SP value with set_term() and
        delscreen().

    --enable-string-hacks
        Controls whether strlcat and strlcpy may be used.  The same issue
        applies to OpenBSD's warnings about snprintf, noting that this function
        is weakly standardized.

        Aside from stifling these warnings, there is no functional improvement
        in ncurses.

    --enable-symlinks
        If your system supports symbolic links, make tic use symbolic links
        rather than hard links to save diskspace when writing aliases in the
        terminfo database.

    --enable-tcap-names
        Compile-in support for user-definable terminal capabilities.  Use the
        -x option of tic and infocmp to treat unrecognized terminal
        capabilities as user-defined strings.  This option is the default,
        unless you have disabled the extended functions.

    --enable-term-driver
        Enable experimental terminal-driver.  This is currently used for the
        MinGW port, by providing a way to substitute the low-level terminfo
        library with different terminal drivers.

    --enable-termcap
        Compile in support for reading terminal descriptions from termcap if no
        match is found in the terminfo database.  See also the --enable-getcap
        and --enable-getcap-cache options.

        Termcap support requires run-time parsing rather than loading
        predigested data.  If you have specified --with-ticlib, then you
        cannot have termcap support since run-time parsing is done in the
        tic library, which is intentionally not part of normal linkage
        dependencies.

    --enable-warnings
        Turn on GCC compiler warnings.  There should be only a few.

    --enable-weak-symbols
        If the --with-pthread option is set, check if the compiler supports
        weak-symbols.  If it does, then name the thread-capable library without
        the "t" (libncurses rather than libncursest), and provide for
        dynamically loading the pthreads entrypoints at runtime.  This allows
        one to reduce the number of library files for ncurses.

    --enable-wgetch-events
        Compile with experimental wgetch-events code.  See ncurses/README.IZ

    --enable-widec
        Compile with wide-character code.  This makes a different version of
        the libraries (e.g., libncursesw.so), which stores characters as
        wide-characters,

        NOTE: applications compiled with this configuration are not compatible
        with those built for 8-bit characters.  You cannot simply make a
        symbolic link to equate libncurses.so with libncursesw.so

        NOTE: the Ada95 binding may be built against either version of the the
        ncurses library, but you must decide which:  the binding installs the
        same set of files for either version.  Currently (2002/6/22) it does
        not use the extended features from the wide-character code, so it is
        probably better to not install the binding for that configuration.

    --enable-xmc-glitch
        Compile-in support experimental xmc (magic cookie) code.

    --with-abi-version=NUM
        Override the ABI version, which is used in shared library filenames.
        Normally this is the same as the release version; some ports have
        special requirements for compatibility.

        This option does not affect linking with libtool, which uses the
        release major/minor numbers.

    --with-ada-compiler=CMD
        Specify the Ada95 compiler command (default "gnatmake")

    --with-ada-include=DIR
        Tell where to install the Ada includes (default:
        PREFIX/lib/ada/adainclude)

    --with-ada-objects=DIR
        Tell where to install the Ada objects (default:  PREFIX/lib/ada/adalib)

    --with-ada-sharedlib
        Build a shared library for Ada95 binding, if the compiler permits.

        NOTE: You must also set the --with-shared option on some platforms
        for a successful build.  You need not use this option when you set
        --with-shared, unless you want to use the Ada shared library.

    --with-bool=TYPE
        If --without-cxx is specified, override the type used for the "bool"
        declared in curses.h (normally the type is automatically chosen to
        correspond with that in <stdbool.h>, or defaults to platform-specific
        sizes).

    --with-build-cpp=XXX
        This option is provided by the same macro used for $BUILD_CC, etc.,
        but is not directly used by ncurses.

    --with-build-cc=XXX
        If cross-compiling, specify a host C compiler, which is needed to
        compile a few utilities which generate source modules for ncurses.
        If you do not give this option, the configure script checks if the
        $BUILD_CC variable is set, and otherwise defaults to gcc or cc.

    --with-build-cflags=XXX
        If cross-compiling, specify the host C compiler-flags.  You might need
        to do this if the target compiler has unusual flags which confuse the
        host compiler.

        You can also set the environment variable $BUILD_CFLAGS rather than
        use this option.

    --with-build-cppflags=XXX
        If cross-compiling, specify the host C preprocessor-flags.  You might
        need to do this if the target compiler has unusual flags which confuse
        the host compiler.

        You can also set the environment variable $BUILD_CPPFLAGS rather than
        use this option.

    --with-build-ldflags=XXX
        If cross-compiling, specify the host linker-flags.  You might need to
        do this if the target linker has unusual flags which confuse the host
        compiler.

        You can also set the environment variable $BUILD_LDFLAGS rather than
        use this option.

    --with-build-libs=XXX
        If cross-compiling, the host libraries.  You might need to do this if
        the target environment requires unusual libraries.

        You can also set the environment variable $BUILD_LIBS rather than
        use this option.

    --with-caps=XXX
        Specify an alternate terminfo capabilities file, which makes the
        configure script look for "include/Caps.XXX".  A few systems, e.g.,
        AIX 4.x use the same overall file-format as ncurses for terminfo
        data, but use different alignments within the tables to support
        legacy applications.  For those systems, you can configure ncurses
        to use a terminfo database which is compatible with the native
        applications.

    --with-ccharw-max=XXX
        Override the size of the wide-character array in cchar_t structures.
        Changing this will alter the binary interface.  This defaults to 5.

    --with-chtype=TYPE
        Override type of chtype, which stores the video attributes and (if
        --enable-widec is not given) a character.  Prior to ncurses 5.5, this
        was always unsigned long, but with ncurses 5.5, it may be unsigned.
        Use this option if you need to preserve compatibility with 64-bit
        executables, e.g., by setting "--with-chtype=long" (the configure
        script supplies "unsigned").

    --with-cxx-shared
        When --with-shared is set, build libncurses++ as a shared library.
        This implicitly relies upon building with gcc/g++, since other
        compiler suites may have differences in the way shared libraries are
        built.  libtool by the way has similar limitations.

    --with-database=XXX
        Specify the terminfo source file to install.  Usually you will wish
        to install ncurses' default (misc/terminfo.src).  Certain systems
        have special requirements, e.g, OS/2 EMX has a customized terminfo
        source file.

    --with-dbmalloc
        For testing, compile and link with Conor Cahill's dbmalloc library.
        This also sets the --disable-leaks option.

    --with-debug
        Generate debug-libraries (default).  These are named by adding "_g"
        to the root, e.g., libncurses_g.a

    --with-default-terminfo-dir=XXX
        Specify the default terminfo database directory.  This is normally
        DATADIR/terminfo, e.g., /usr/share/terminfo.

    --with-dmalloc
        For testing, compile and link with Gray Watson's dmalloc library.
        This also sets the --disable-leaks option.

    --with-fallbacks=XXX
        Specify a list of fallback terminal descriptions which will be
        compiled into the ncurses library.  See CONFIGURING FALLBACK ENTRIES.

    --with-gpm
        use Alessandro Rubini's GPM library to provide mouse support on the
        Linux console.  Prior to ncurses 5.5, this introduced a dependency on
        the GPM library.

        Currently ncurses uses the dlsym() function to bind to the library at
        runtime, so it is only necessary that the library be present when
        ncurses is built, to obtain the filename (or soname) used in the
        corresponding dlopen() call.  If you give a value for this option,
        e.g.,

                --with-gpm=$HOME/tmp/test-gpm.so

        that overrides the configure check for the soname.

        See also --without-dlsym

    --with-hashed-db[=XXX]
        Use a hashed database for storing terminfo data rather than storing
        each compiled entry in a separate binary file within a directory
        tree.

        In particular, this uses the Berkeley database 1.8.5 interface, as
        provided by that and its successors db 2, 3, and 4.  The actual
        interface is slightly different in the successor versions of the
        Berkeley database.  The database should have been configured using
        "--enable-compat185".

        If you use this option for configuring ncurses, tic will only be able
        to write entries in the hashed database.  infocmp can still read
        entries from a directory tree as well as reading entries from the
        hashed database.  To do this, infocmp determines whether the $TERMINFO
        variable points to a directory or a file, and reads the directory-tree
        or hashed database respectively.

        You cannot have a directory containing both hashed-database and
        filesystem-based terminfo entries.

        Use the parameter value to give the install-prefix used for the
        database, e.g.,
                --with-hashed-db=/usr/local/BigBase
        to find the corresponding include- and lib-directories under the
        given directory.  Alternatively, you can specify a directory leaf
        name, e.g., 
                --with-hashed-db=db4
        to make the configure script look for files in a subdirectory such as
                /usr/include/db4/db.h
                /usr/lib/db4/libdb.so

        See also the --enable-getcap option.

    --with-install-prefix=XXX
        Allows you to specify an alternate location for installing ncurses
        after building it.  The value you specify is prepended to the "real"
        install location.  This simplifies making binary packages.  The
        makefile variable DESTDIR is set by this option.  It is also possible
        to use
                make install DESTDIR=XXX
        since the makefiles pass that variable to subordinate makes.

        NOTE: a few systems build shared libraries with fixed pathnames; this
        option probably will not work for those configurations.

    --with-lib-prefix=XXX
        OS/2 EMX used a different naming convention from most Unix-like
        platforms.  It required that the "lib" part of a library name was
        omitted.  Newer EMX as part of eComStation does not follow that
        convention.  Use this option to override the configure script's
        assumptions about the library-prefix.  If this option is omitted, it
        uses the original OS/2 EMX convention for that platform.  Use
        "--with-lib-prefix=lib" for the newer EMX in eComStation.  Use
        "--without-lib-prefix" to suppress it for other odd platforms.

    --with-libtool[=XXX]
        Generate libraries with libtool.  If this option is selected, then it
        overrides all other library model specifications.  Note that libtool
        must already be installed, uses makefile rules dependent on GNU make,
        and does not promise to follow the version numbering convention of
        other shared libraries on your system.  However, if the --with-shared
        option does not succeed, you may get better results with this option.

        If a parameter value is given, it must be the full pathname of the
        particular version of libtool, e.g.,
                /usr/bin/libtool-1.2.3

        It is possible to rebuild the configure script to use the automake
        macros for libtool, e.g., AC_PROG_LIBTOOL.  See the comments in
        aclocal.m4 for CF_PROG_LIBTOOL, and ensure that you build configure
        using the appropriate patch for autoconf from
                http://invisible-island.net/autoconf/

    --with-manpage-aliases
        Tell the configure script you wish to create entries in the
        man-directory for aliases to manpages which list them, e.g., the
        functions in the panel manpage.  This is the default.  You can disable
        it if your man program does this.  You can also disable
        --with-manpage-symlinks to install files containing a ".so" command
        rather than symbolic links.

    --with-manpage-format=XXX
        Tell the configure script how you would like to install man-pages.  The
        option value must be one of these:  gzip, compress, BSDI, normal,
        formatted.  If you do not give this option, the configure script
        attempts to determine which is the case.

    --with-manpage-renames=XXX
        Tell the configure script that you wish to rename the manpages while
        installing.  Currently the only distribution which does this is Debian.
        The option value specifies the name of a file that lists the renamed
        files, e.g., $srcdir/man/man_db.renames

    --with-manpage-symlinks
        Tell the configure script that you wish to make symbolic links in the
        man-directory for aliases to the man-pages.  This is the default, but
        can be disabled for systems that provide this automatically.  Doing
        this on systems that do not support symbolic links will result in
        copying the man-page for each alias.

    --with-manpage-tbl
        Tell the configure script that you with to preprocess the manpages
        by running them through tbl to generate tables understandable by
        nroff.

    --with-mmask-t=TYPE
        Override type of mmask_t, which stores the mouse mask.  Prior to
        ncurses 5.5, this was always unsigned long, but with ncurses 5.5, it
        may be unsigned.  Use this option if you need to preserve compatibility
        with 64-bit executables.

    --with-normal
        Generate normal (i.e., static) libraries (default).

        Note:  on Linux, the configure script will attempt to use the GPM
        library via the dlsym() function call.  Use --without-dlsym to disable
        this feature, or --without-gpm, depending on whether you wish to use
        GPM.

    --with-ospeed=TYPE
        Override type of ospeed variable, which is part of the termcap
        compatibility interface.  In termcap, this is a 'short', which works
        for a wide range of baudrates because ospeed is not the actual speed
        but the encoded value, e.g., B9600 would be a small number such as 13.
        However the encoding scheme originally allowed for values "only" up to
        38400bd.  A newer set of definitions past 38400bd is not encoded as
        compactly, and is not guaranteed to fit into a short (see the function
        cfgetospeed(), which returns a speed_t for this reason).  In practice,
        applications that required knowledge of the ospeed variable, i.e.,
        those using termcap, do not use the higher speeds.  Your application
        (or system, in general) may or may not.

    --with-pkg-config=[DIR]
        Check for pkg-config, optionally specifying its path.

    --with-pkg-config-libdir=[DIR]
        If pkg-config was found, override the automatic check for its library
        path.

    --with-profile
        Generate profile-libraries These are named by adding "_p" to the root,
        e.g., libncurses_p.a

    --with-pthread
        Link with POSIX threads, set --enable-reentrant.  The use_window() and
        use_screen() functions will use mutex's, allowing rudimentary support
        for multithreaded applications.

    --with-rcs-ids
        Compile-in RCS identifiers.  Most of the C files have an identifier.

    --with-rel-version=NUM
        Override the release version, which may be used in shared library
        filenames.  This consists of a major and minor version number separated
        by ".".  Normally the major version number is the same as the ABI
        version; some ports have special requirements for compatibility.

    --with-shared
        Generate shared-libraries.  The names given depend on the system for
        which you are building, typically using a ".so" suffix, along with
        symbolic links that refer to the release version.

        NOTE: Unless you override the configure script by setting the $CFLAGS
        environment variable, these will not be built with the -g debugging
        option.

        NOTE: For some configurations, e.g., installing a new version of
        ncurses shared libraries on a machine which already has ncurses
        shared libraries, you may encounter problems with the linker.
        For example, it may prevent you from running  the build tree's
        copy of tic (for installing the terminfo database) because it
        loads the system's copy of the ncurses shared libraries.
        
        In that case, using the misc/shlib script may be helpful, since it
        sets $LD_LIBRARY_PATH to point to the build tree, e.g.,

                ./misc/shlib make install

        Alternatively, for most platforms, the linker accepts a list of
        directories which will be searched for libraries at run-time.  The
        configure script allows you to modify this list using the
        RPATH_LIST environment variable.  It is a colon-separated list of
        directories (default:  the "libdir" set via the configure script).
        If you set that to put "../lib" first in the list, the linker will
        look first at the build-directory, and avoid conflict with libraries
        already installed.  One drawback to this approach is that libraries
        can be accidentally searched in any "../lib" directory.

        NOTE: If you use the --with-ada-sharedlib option, you should also
        set this option, to ensure that C-language modules needed for the
        Ada binding use appropriate compiler options.

    --with-shlib-version=XXX
        Specify whether to use the release or ABI version for shared libraries.
        This is normally chosen automatically based on the type of system
        which you are building on.  We use it for testing the configure script.

    --with-sysmouse
        use FreeBSD sysmouse interface provide mouse support on the console.

    --with-system-type=XXX
        For testing, override the derived host system-type which is used to
        decide things such as the linker commands used to build shared
        libraries.  This is normally chosen automatically based on the type of
        system which you are building on.  We use it for testing the configure
        script.

    --with-terminfo-dirs=XXX
        Specify a search-list of terminfo directories which will be compiled
        into the ncurses library (default: DATADIR/terminfo)

    --with-termlib[=XXX]
        When building the ncurses library, organize this as two parts:  the
        curses library (libncurses) and the low-level terminfo library
        (libtinfo).  This is done to accommodate applications that use only
        the latter.  The terminfo library is about half the size of the total.

        If an option value is given, that overrides the name of the terminfo
        library.  For instance, if the wide-character version is built, the
        terminfo library would be named libtinfow.  But the libtinfow interface
        is upward compatible from libtinfo, so it would be possible to overlay
        libtinfo.so with a "wide" version of libtinfow.so by renaming it with
        this option.

    --with-termpath=XXX
        Specify a search-list of termcap files which will be compiled into the
        ncurses library (default:  /etc/termcap:/usr/share/misc/termcap)

    --with-ticlib[=XXX]
        When building the ncurses library, build a separate library for
        the modules that are used only by the utility programs.  Normally
        those would be bundled with the termlib or ncurses libraries.

        If an option value is given, that overrides the name of the tic
        library.  As in termlib, there is no ABI difference between the
        "wide" libticw.so and libtic.so

        NOTE: Overriding the name of the tic library may be useful if you are
        also using the --with-termlib option to rename libtinfo.  If you are
        not doing that, renaming the tic library can result in conflicting
        library dependencies for tic and other programs built with the tic
        library.

    --with-tparm-arg[=XXX]
        Override the type used for tparm() arguments, which normally is a
        "long".  However the function must assume that its arguments can hold a
        pointer to char's which is not always workable for 64-bit platforms.  A
        better choice would be intptr_t, which was not available at the time
        tparm's interface was defined.

        If the option is not given, this defaults to "long".

    --with-trace
        Configure the trace() function as part of the all models of the ncurses
        library.  Normally it is part of the debug (libncurses_g) library only.

    --with-xterm-kbs=XXX
        Configure xterm's terminfo entries to use either BS (^H, i.e., ASCII
        backspace) or DEL (^?, or 127).  XXX can be BS (or bs, 8) or DEL
        (or del, 127).

        During installation, the makefile and scripts modifies the "xterm+kbs"
        terminfo entry to use this setting.

    --with-valgrind
        For testing, compile with debug option.
        This also sets the --disable-leaks option.

    --with-wrap-prefix=XXX
        When using the --enable-reentrant option, ncurses redefines variables
        that would be global in curses, e.g., LINES, as a macro that calls a
        "wrapping" function which fetches the data from the current SCREEN
        structure.  Normally that function is named by prepending "_nc_" to the
        variable's name.  The function is technically private (since portable
        applications would not refer directly to it).  But according to one
        line of reasoning, it is not the same type of "private" as functions
        which applications should not call even via a macro.  This configure
        option lets you choose the prefix for these wrapped variables.

    --without-ada
        Suppress the configure script's check for Ada95, do not build the
        Ada95 binding and related demo.

    --without-curses-h
        Don't install the ncurses header with the name "curses.h".  Rather,
        install as "ncurses.h" and modify the installed headers and manpages
        accordingly.

        Likewise, do not install an alias "curses" for the ncurses manpage.

    --without-cxx
        XSI curses declares "bool" as part of the interface.  C++ also declares
        "bool".  Neither specifies the size and type of booleans, but both
        insist on the same name.  We chose to accommodate this by making the
        configure script check for the size and type (e.g., unsigned or signed)
        that your C++ compiler uses for booleans.  If you do not wish to use
        ncurses with C++, use this option to tell the configure script to not
        adjust ncurses bool to match C++.

    --without-cxx-binding
        Suppress the configure script's check for C++, do not build the
        C++ binding and related demo.

    --without-develop
        Disable development options.  This does not include those that change
        the interface, such as --enable-widec.

    --without-dlsym
        Do not use dlsym() to load GPM dynamically.

    --without-manpages
        Tell the configure script to suppress the install of ncurses' manpages.

    --without-progs
        Tell the configure script to suppress the build of ncurses' application
        programs (e.g., tic).  The test applications will still be built if you
        type "make", though not if you simply do "make install".

    --without-tests
        Tell the configure script to suppress the build of ncurses' test
        programs.

    --without-xterm-new
        Tell the configure script to use "xterm-old" for the entry used in
        the terminfo database.  This will work with variations such as
        X11R5 and X11R6 xterm.


COMPATIBILITY WITH OLDER VERSIONS OF NCURSES:
--------------------------------------------

    Because ncurses implements the X/Open Curses Specification, its interface
    is fairly stable.  That does not mean the interface does not change.
    Changes are made to the documented interfaces when we find differences
    between ncurses and X/Open or implementations which they certify (such as
    Solaris).  We add extensions to those interfaces to solve problems not
    addressed by the original curses design, but those must not conflict with
    the X/Open documentation.

    Here are some of the major interface changes, and related problems which
    you may encounter when building a system with different versions of
    ncurses:

    5.8 (Feb 26, 2011)
        Interface changes:

        + add an alternate library configuration, i.e., "terminal driver" to
          support port to Windows, built with MinGW.  There are two drivers
          (terminfo and Windows console).  The terminfo driver works on other
          platforms.

        + add a new set of functions which accept a SCREEN* parameter, in
          contrast with the original set which use the global value "sp".
          By default, these names end with "_sp", and are otherwise
          functionally identical with the originals.

          In addition to the "_sp" functions, there are a few new functions
          associated with this feature:  ceiling_panel, ground_panel,
          new_prescr.

          If the library is not built with the sp-funcs extension, there
          are no related interface changes.

        + add tiparm function based on review of X/Open Curses Issue 7.

        + change internal _nc_has_mouse function to public has_mouse function

        Added extensions:

        + add a few more functions to support the NCURSES_OPAQUE feature:
          get_escdelay, is_pad, is_subwin

        Added internal functions (other than "_sp" variants):
                _nc_curscr_of
                _nc_format_slks
                _nc_get_alias_table
                _nc_get_hash_info
                _nc_insert_wch
                _nc_newscr_of
                _nc_outc_wrapper
                _nc_retrace_char
                _nc_retrace_int_attr_t
                _nc_retrace_mmask_t
                _nc_setup_tinfo
                _nc_stdscr_of
                _nc_tinfo_cmdch

        Removed internal functions:
                _nc_makenew (some configurations replace by _nc_makenew_sp)

        Modified internal functions:
                _nc_UpdateAttrs
                _nc_get_hash_table
                _nc_has_mouse
                _nc_insert_ch
                _nc_wgetch

    5.7 (November 2, 2008)
        Interface changes:

        + generate linkable stubs for some macros:
                getattrs

        + Add new library configuration for tic-library (the non-curses portion
          of the ncurses library used for the tic program as well as some
          others such as tack.  There is no API change, but makefiles would be
          changed to use the tic-library built separately.

          tack, distributed separately from ncurses, uses some of the internal
          _nc_XXX functions, which are declared in the tic.h header file.

          The reason for providing this separate library is that none of the
          functions in it are suitable for threaded applications.

        + Add new library configuration (ncursest, ncurseswt) which provides
          rudimentary support for POSIX threads.  This introduces opaque
          access functions to the WINDOW structure and adds a parameter to
          several internal functions.

        + move most internal variables (except tic-library) into data blocks
          _nc_globals and _nc_prescreen to simplify analysis.  Those were
          globally accessible, but since they were not part of the documented
          API, there is no ABI change.

        + changed static tables of strings to be indices into long strings, to
          improve startup performance.  This changes parameter lists for some
          of the internal functions.

        Added extensions:

        + add NCURSES_OPAQUE definition in curses.h to control whether internal
          details of the WINDOW structure are visible to an application.  This
          is always defined when the threaded library is built, and is optional
          otherwise.  New functions for this:  is_cleared, is_idcok, is_idlok,
          is_immedok, is_keypad, is_leaveok, is_nodelay, is_notimeout,
          is_scrollok, is_syncok, wgetparent and wgetscrreg.

        + the threaded library (ncursest) also disallows direct updating of
          global curses-level variables, providing functions (via macros) for
          obtaining their value.  A few of those variables can be modified by
          the application, using new functions:  set_escdelay, set_tabsize

        + added functions use_window() and use_screen() which wrap a mutex
          (if threading is configured) around a call to a user-supplied
          function.

        Added internal functions:
                _nc_get_alias_table
                _nc_get_screensize
                _nc_keyname
                _nc_screen_of
                _nc_set_no_padding
                _nc_tracechar
                _nc_tracemouse
                _nc_unctrl
                _nc_ungetch

                These are used for leak-testing, and are stubs for
                ABI compatibility when ncurses is not configured for that
                using the --disable-leaks configure script option:

                _nc_free_and_exit
                _nc_leaks_tinfo

        Removed internal functions:
                none

        Modified internal functions:
                _nc_fifo_dump
                _nc_find_entry
                _nc_handle_sigwinch
                _nc_init_keytry
                _nc_keypad
                _nc_locale_breaks_acs
                _nc_timed_wait
                _nc_update_screensize

                Use new typedef TRIES to replace "struct tries":

                _nc_add_to_try
                _nc_expand_try
                _nc_remove_key
                _nc_remove_string
                _nc_trace_tries

    5.6 (December 17, 2006)
        Interface changes:

        + generate linkable stubs for some macros:

          getbegx, getbegy, getcurx, getcury, getmaxx, getmaxy, getparx,
          getpary, getpary,

          and (for libncursesw)

          wgetbkgrnd

        Added extensions:
                nofilter()
                use_legacy_coding()

        Added internal functions:
                _nc_first_db
                _nc_get_source
                _nc_handle_sigwinch
                _nc_is_abs_path
                _nc_is_dir_path
                _nc_is_file_path
                _nc_keep_tic_dir
                _nc_keep_tic_dir
                _nc_last_db
                _nc_next_db
                _nc_read_termtype
                _nc_tic_dir

                Also (if using the hashed database configuration):

                _nc_db_close
                _nc_db_first
                _nc_db_get
                _nc_db_have_data
                _nc_db_have_index
                _nc_db_next
                _nc_db_open
                _nc_db_put

                otherwise

                _nc_hashed_db

        Removed internal functions:
                none

        Modified internal functions:
                _nc_add_to_try
                _nc_do_color
                _nc_expand_try
                _nc_remove_key
                _nc_setupscreen

    5.5 (October 10, 2005)
        Interface changes:

        + terminfo installs "xterm-new" as "xterm" entry rather than
          "xterm-old" (aka xterm-r6).

        + terminfo data is installed using the tic -x option (few systems
          still use ncurses 4.2).

        + modify C++ binding to work with newer C++ compilers by providing
          initializers and using modern casts.  Old-style header names are
          still used in this release to allow compiling with not-so-old
          compilers.

        + form and menu libraries now work with wide-character data.
          Applications which bypassed the form library and manipulated the
          FIELD.buf data directly will not work properly with libformw, since
          that no longer points to an array of char.  The set_field_buffer()
          and field_buffer() functions translate to/from the actual field
          data.

        + change SP->_current_attr to a pointer, adjust ifdef's to ensure that
          libtinfo.so and libtinfow.so have the same ABI.  The reason for this
          is that the corresponding data which belongs to the upper-level
          ncurses library has a different size in each model.

        + winnstr() now returns multibyte character strings for the
          wide-character configuration.

        + assume_default_colors() no longer requires that use_default_colors()
          be called first.

        + data_ahead() now works with wide-characters.

        + slk_set() and slk_wset() now accept and store multibyte or
          multicolumn characters.

        + start_color() now returns OK if colors have already been started.
          start_color() also returns ERR if it cannot allocate memory.

        + pair_content() now returns -1 for consistency with init_pair() if it
          corresponds to the default-color.

        + unctrl() now returns null if its parameter does not correspond
          to an unsigned char.

        Added extensions:
                Experimental mouse version 2 supports wheel mice with buttons
                4 and 5.  This requires ABI 6 because it modifies the encoding
                of mouse events.

                Experimental extended colors allows encoding of 256 foreground
                and background colors, e.g., with the xterm-256color or
                xterm-88color terminfo entries.  This requires ABI 6 because
                it changes the size of cchar_t.

        Added internal functions:
                _nc_check_termtype2
                _nc_resolve_uses2
                _nc_retrace_cptr
                _nc_retrace_cvoid_ptr
                _nc_retrace_void_ptr
                _nc_setup_term

        Removed internal functions:
                none

        Modified internal functions:
                _nc_insert_ch
                _nc_save_str
                _nc_trans_string

    5.4 (February 8, 2004)
        Interface changes:

        + add the remaining functions for X/Open curses wide-character support.
          These are only available if the library is configured using the
          --enable-widec option.
                pecho_wchar()
                slk_wset()

        + write getyx() and related 2-return macros in terms of getcury(),
          getcurx(), etc.

        + simplify ifdef for bool declaration in curses.h

        + modify ifdef's in curses.h that disabled use of __attribute__() for
          g++, since recent versions implement the cases which ncurses uses.

        + change some interfaces to use const:
                define_key()
                mvprintw()
                mvwprintw()
                printw()
                vw_printw()
                winsnstr()
                wprintw()

        Added extensions:
                key_defined()

        Added internal functions:
                _nc_get_locale()
                _nc_insert_ch()
                _nc_is_charable()       wide
                _nc_locale_breaks_acs()
                _nc_pathlast()
                _nc_to_char()           wide
                _nc_to_widechar()       wide
                _nc_tparm_analyze()
                _nc_trace_bufcat()      debug
                _nc_unicode_locale()

        Removed internal functions:
                _nc_outstr()
                _nc_sigaction()

        Modified internal functions:
                _nc_remove_string()
                _nc_retrace_chtype()

    5.3 (October 12, 2002)
        Interface changes:

        + change type for bool used in headers to NCURSES_BOOL, which usually
          is the same as the compiler's definition for 'bool'.

        + add all but two functions for X/Open curses wide-character support.
          These are only available if the library is configured using the
          --enable-widec option.  Missing functions are
                pecho_wchar()
                slk_wset()

        + add environment variable $NCURSES_ASSUMED_COLORS to modify the
          assume_default_colors() extension.

        Added extensions:
                is_term_resized()
                resize_term()

        Added internal functions:
                _nc_altcharset_name()   debug
                _nc_reset_colors()
                _nc_retrace_bool()      debug
                _nc_retrace_unsigned()  debug
                _nc_rootname()
                _nc_trace_ttymode()     debug
                _nc_varargs()           debug
                _nc_visbufn()           debug
                _nc_wgetch()

        Removed internal functions:
                _nc_background()

        Modified internal functions:
                _nc_freeall()           debug

    5.2 (October 21, 2000)
        Interface changes:

        + revert termcap ospeed variable to 'short' (see discussion of the
          --with-ospeed configure option).

    5.1 (July 8, 2000)
        Interface changes:

        + made the extended terminal capabilities
          (configure --enable-tcap-names) a standard feature.  This should
          be transparent to applications that do not require it.

        + removed the trace() function and related trace support from the
          production library.

        + modified curses.h.in, undef'ing some symbols to avoid conflict
          with C++ STL.

        Added extensions:  assume_default_colors().

    5.0 (October 23, 1999)
        Interface changes:

        + implemented the wcolor_set() and slk_color() functions.

        + move macro winch to a function, to hide details of struct ldat

        + corrected prototypes for slk_* functions, using chtype rather than
          attr_t.

        + the slk_attr_{set,off,on} functions need an additional void*
          parameter according to XSI.

        + modified several prototypes to correspond with 1997 version of X/Open
          Curses:  [w]attr_get(), [w]attr_set(), border_set() have different
          parameters.  Some functions were renamed or misspelled:
          erase_wchar(), in_wchntr(), mvin_wchntr().  Some developers have used
          attr_get().

        Added extensions:  keybound(), curses_version().

        Terminfo database changes:

        + change translation for termcap 'rs' to terminfo 'rs2', which is
          the documented equivalent, rather than 'rs1'.

        The problems are subtler in recent releases.

        a) This release provides users with the ability to define their own
           terminal capability extensions, like termcap.  To accomplish this,
           we redesigned the TERMTYPE struct (in term.h).  Very few
           applications use this struct.  They must be recompiled to work with
           the 5.0 library.

        a) If you use the extended terminfo names (i.e., you used configure
           --enable-tcap-names), the resulting terminfo database can have some
           entries which are not readable by older versions of ncurses.  This
           is a bug in the older versions:

           + the terminfo database stores booleans, numbers and strings in
             arrays.  The capabilities that are listed in the arrays are
             specified by X/Open.  ncurses recognizes a number of obsolete and
             extended names which are stored past the end of the specified
             entries.

           + a change to read_entry.c in 951001 made the library do an lseek()
             call incorrectly skipping data which is already read from the
             string array.  This happens when the number of strings in the
             terminfo data file is greater than STRCOUNT, the number of
             specified and obsolete or extended strings.

           + as part of alignment with the X/Open final specification, in the
             990109 patch we added two new terminfo capabilities:
             set_a_attributes and set_pglen_inch).  This makes the indices for
             the obsolete and extended capabilities shift up by 2.

           + the last two capabilities in the obsolete/extended list are memu
             and meml, which are found in most terminfo descriptions for xterm.

             When trying to read this terminfo entry, the spurious lseek()
             causes the library to attempt to read the final portion of the
             terminfo data (the text of the string capabilities) 4 characters
             past its starting point, and reads 4 characters too few.  The
             library rejects the data, and applications are unable to
             initialize that terminal type.

           FIX: remove memu and meml from the xterm description.  They are
           obsolete, not used by ncurses.  (It appears that the feature was
           added to xterm to make it more like hpterm).

           This is not a problem if you do not use the -x option of tic to
           create a terminfo database with extended names.  Note that the
           user-defined terminal capabilities are not affected by this bug,
           since they are stored in a table after the older terminfo data ends,
           and are invisible to the older libraries.

        c) Some developers did not wish to use the C++ binding, and used the
           configure --without-cxx option.  This causes problems if someone
           uses the ncurses library from C++ because that configure test
           determines the type for C++'s bool and makes ncurses match it, since
           both C++ and curses are specified to declare bool.  Calling ncurses
           functions with the incorrect type for bool will cause execution
           errors.  In 5.0 we added a configure option "--without-cxx-binding"
           which controls whether the binding itself is built and installed.

    4.2 (March 2, 1998)
        Interface changes:

        + correct prototype for termattrs() as per XPG4 version 2.

        + add placeholder prototypes for color_set(), erasewchar(),
          term_attrs(), wcolor_set() as per XPG4 version 2.

        + add macros getcur[xy] getbeg[xy] getpar[xy], which are defined in
          SVr4 headers.

        New extensions: keyok() and define_key().

        Terminfo database changes:

        + corrected definition in curses.h for ACS_LANTERN, which was 'I'
          rather than 'i'.

    4.1 (May 15, 1997)

        We added these extensions:  use_default_colors().  Also added
        configure option --enable-const, to support the use of const where
        X/Open should have, but did not, specify.

        The terminfo database content changed the representation of color for
        most entries that use ANSI colors.  SVr4 curses treats the setaf/setab
        and setf/setb capabilities differently, interchanging the red/blue
        colors in the latter.

    4.0 (December 24, 1996)

        We bumped to version 4.0 because the newly released Linux dynamic
        loader (ld.so.1.8.5) did not load shared libraries whose ABI and REL
        versions were inconsistent.  At that point, ncurses ABI was 3.4 and the
        REL was 1.9.9g, so we made them consistent.

    1.9.9g (December 1, 1996)

        This fixed most of the problems with 1.9.9e, and made these interface
        changes:

        + remove tparam(), which had been provided for compatibility with
          some termcap.  tparm() is standard, and does not conflict with
          application's fallback for missing tparam().

        + turn off hardware echo in initscr().  This changes the sense of the
          echo() function, which was initialized to echoing rather than
          nonechoing (the latter is specified).  There were several other
          corrections to the terminal I/O settings which cause applications to
          behave differently.

        + implemented several functions (such as attr_on()) which were
          available only as macros.

        + corrected several typos in curses.h.in (i.e., the mvXXXX macros).

        + corrected prototypes for delay_output(),
          has_color, immedok() and idcok().

        + corrected misspelled getbkgd().  Some applications used the
          misspelled name.

        + added _yoffset to WINDOW.  The size of WINDOW does not impact
          applications, since they use only pointers to WINDOW structs.

        These changes were made to the terminfo database:

        + removed boolean 'getm' which was available as an extended name.

        We added these extensions: wresize(), resizeterm(), has_key() and
        mcprint().

    1.9.9e (March 24, 1996)

        not recommended (a last-minute/untested change left the forms and
        menus libraries unusable since they do not repaint the screen).
        Foreground/background colors are combined incorrectly, working properly
        only on a black background.  When this was released, the X/Open
        specification was available only in draft form.

        Some applications (such as lxdialog) were "fixed" to work with the
        incorrect color scheme.


IF YOU ARE A SYSTEM INTEGRATOR:
------------------------------

    Configuration and Installation:

        On platforms where ncurses is assumed to be installed in /usr/lib,
        the configure script uses "/usr" as a default:

                GNU/Linux, FreeBSD, NetBSD, OpenBSD, Cygwin

        For other platforms, the default is "/usr/local".  See the discussion
        of the "--disable-overwrite" option.

        The location of the terminfo is set indirectly by the "--datadir"
        configure option, e.g., /usr/share/terminfo, given a datadir of
        /usr/share.  You may want to override this if you are installing
        ncurses libraries in nonstandard locations, but wish to share the
        terminfo database.

        Normally the ncurses library is configured in a pure-terminfo mode;
        that is, with the --disable-termcap option.  This makes the ncurses
        library smaller and faster.  The ncurses library includes a termcap
        emulation that queries the terminfo database, so even applications that
        use raw termcap to query terminal characteristics will win (providing
        you recompile and relink them!).

        If you must configure with termcap fallback enabled, you may also wish
        to use the --enable-getcap option.  This speeds up termcap-based
        startups, at the expense of not allowing personal termcap entries to
        reference the terminfo tree.  See comments in
        ncurses/tinfo/read_termcap.c for further details.

        Note that if you have $TERMCAP set, ncurses will use that value
        to locate termcap data.  In particular, running from xterm will
        set $TERMCAP to the contents of the xterm's termcap entry.
        If ncurses sees that, it will not examine /etc/termcap.

    Keyboard Mapping:

        The terminfo file assumes that Shift-Tab generates \E[Z (the ECMA-48
        reverse-tabulation sequence) rather than ^I.  Here are the loadkeys -d
        mappings that will set this up:

                keycode  15 = Tab             Tab
                        alt     keycode  15 = Meta_Tab
                        shift   keycode  15 = F26
                string F26 ="\033[Z"

    Naming the Console Terminal

        In various systems there has been a practice of designating the system
        console driver type as `console'.  Please do not do this!  It
        complicates peoples' lives, because it can mean that several different
        terminfo entries from different operating systems all logically want to
        be called `console'.

        Please pick a name unique to your console driver and set that up
        in the /etc/inittab table or local equivalent.  Send the entry to the
        terminfo maintainer (listed in the misc/terminfo file) to be included
        in the terminfo file, if it's not already there.  See the
        term(7) manual page included with this distribution for more on
        conventions for choosing type names.

        Here are some recommended primary console names:

                linux   -- Linux console driver
                freebsd -- FreeBSD
                netbsd  -- NetBSD
                bsdos   -- BSD/OS

        If you are responsible for integrating ncurses for one of these
        distributions, please either use the recommended name or get back
        to us explaining why you don't want to, so we can work out nomenclature
        that will make users' lives easier rather than harder.


RECENT XTERM VERSIONS:
---------------------

        The terminfo database file included with this distribution assumes you
        are running a modern xterm based on XFree86 (i.e., xterm-new).  The
        earlier X11R6 entry (xterm-r6) and X11R5 entry (xterm-r5) is provided
        as well.  See the --without-xterm-new configure script option if you
        are unable to update your system.


CONFIGURING FALLBACK ENTRIES:
----------------------------

        In order to support operation of ncurses programs before the terminfo
        tree is accessible (that is, in single-user mode or at OS installation
        time) the ncurses library can be compiled to include an array of
        pre-fetched fallback entries.  This must be done on a machine which
        has ncurses' infocmp and terminfo database installed (as well as
        ncurses' tic and infocmp programs).

        These entries are checked by setupterm() only when the conventional
        fetches from the terminfo tree and the termcap fallback (if configured)
        have been tried and failed.  Thus, the presence of a fallback will not
        shadow modifications to the on-disk entry for the same type, when that
        entry is accessible.

        By default, there are no entries on the fallback list.  After you have
        built the ncurses suite for the first time, you can change the list
        (the process needs infocmp(1)).  To do so, use the script
        ncurses/tinfo/MKfallback.sh.  The configure script option
        --with-fallbacks does this (it accepts a comma-separated list of the
        names you wish, and does not require a rebuild).

        If you wanted (say) to have linux, vt100, and xterm fallbacks, you
        might use the commands

                cd ncurses;
                tinfo/MKfallback.sh \
                        $TERMINFO \
                        ../misc/terminfo.src \
                        `which tic` \
                        linux vt100 xterm >fallback.c

        The first three parameters of the script are normally supplied by
        the configured makefiles via the "--with-fallbacks" option.  They
        are

                1) the location of the terminfo database
                2) the source for the terminfo entries
                3) the location of the tic program, used to create a terminfo
                   database.

        Then just rebuild and reinstall the library as you would normally.
        You can restore the default empty fallback list with

                tinfo/MKfallback.sh \
                        $TERMINFO \
                        ../misc/terminfo.src \
                        `which tic` \
                        >fallback.c

        The overhead for an empty fallback list is one trivial stub function.
        Any non-empty fallback list is const-ed and therefore lives in sharable
        text space.  You can look at the comment trailing each initializer in
        the generated ncurses/fallback.c file to see the core cost of the
        fallbacks.  A good rule of thumb for modern vt100-like entries is that
        each one will cost about 2.5K of text space.


BSD CONVERSION NOTES:
--------------------

        If you need to support really ancient BSD programs, you probably
        want to configure with the --enable-bsdpad option.  What this does
        is enable code in tputs() that recognizes a numeric prefix on a
        capability as a request for that much trailing padding in milliseconds.
        There are old BSD programs that do things like tputs("50").

        (If you are distributing ncurses as a support-library component of
        an application you probably want to put the remainder of this section
        in the package README file.)

        The following note applies only if you have configured ncurses with
        --enable-termcap.

------------------------------- CUT HERE --------------------------------

If you are installing this application privately (either because you
have no root access or want to experiment with it before doing a root
installation), there are a couple of details you need to be aware of.
They have to do with the ncurses library, which uses terminfo rather
than termcap for describing terminal characteristics.

Though the ncurses library is terminfo-based, it will interpret your
TERMCAP variable (if present), any local termcap files you reference
through it, and the system termcap file.  However, in order to avoid
slowing down your application startup, it will only do this once per
terminal type!

The first time you load a given terminal type from your termcap
database, the library initialization code will automatically write it
in terminfo format to a subdirectory under $HOME/.terminfo.  After
that, the initialization code will find it there and do a (much
faster) terminfo fetch.

Usually, all this means is that your home directory will silently grow
an invisible .terminfo subdirectory which will get filled in with
terminfo descriptions of terminal types as you invoke them.  If anyone
ever installs a global terminfo tree on your system, this will quietly
stop happening and your $HOME/.terminfo will become redundant.

The objective of all this logic is to make converting from BSD termcap
as painless as possible without slowing down your application (termcap
compilation is expensive).

If you don't have a TERMCAP variable or custom personal termcap file,
you can skip the rest of this dissertation.

If you *do* have a TERMCAP variable and/or a custom personal termcap file
that defines a terminal type, that definition will stop being visible
to this application after the first time you run it, because it will
instead see the terminfo entry that it wrote to $HOME/terminfo the
first time around.

Subsequently, editing the TERMCAP variable or personal TERMCAP file
will have no effect unless you explicitly remove the terminfo entry
under $HOME/terminfo.  If you do that, the entry will be recompiled
from your termcap resources the next time it is invoked.

To avoid these complications, use infocmp(1) and tic(1) to edit the
terminfo directory directly.

------------------------------- CUT HERE --------------------------------

USING NCURSES WITH AFS:
        AFS treats each directory as a separate logical filesystem, you
        can't hard-link across them.  The --enable-symlinks option copes
        with this by making tic use symbolic links.

USING NCURSES WITH GPM:
        Ncurses 4.1 and up can be configured to use GPM (General Purpose Mouse)
        which is used with Linux console.  Be aware that GPM is commonly
        installed as a shared library which contains a wrapper for the curses
        wgetch() function (libcurses.o).  Some integrators have simplified
        linking applications by combining all or part of libcurses.so into the
        libgpm.so file, producing symbol conflicts with ncurses (specifically
        the wgetch function).  This was originally the BSD curses, but
        generally whatever curses library exists on the system.

        You may be able to work around this problem by linking as follows:

                cc -o foo foo.o -lncurses -lgpm -lncurses

        but the linker may not cooperate, producing mysterious errors.
        See the FAQ, as well as the discussion under the --with-gpm option:

        http://invisible-island.net/ncurses/ncurses.faq.html#using_gpm_lib

BUILDING NCURSES WITH A CROSS-COMPILER
        Ncurses can be built with a cross-compiler.  Some parts must be built
        with the host's compiler since they are used for building programs
        (e.g., ncurses/make_hash and ncurses/make_keys) that generate tables
        that are compiled into the ncurses library.  The essential thing to do
        is set the BUILD_CC environment variable to your host's compiler, and
        run the configure script configuring for the cross-compiler.

        The configure options --with-build-cc, etc., are provided to make this
        simpler.  Since make_hash and make_keys use only ANSI C features, it
        is normally not necessary to provide the other options such as
        --with-build-libs, but they are provided for completeness.

        Note that all of the generated source-files which are part of ncurses
        will be made if you use

                make sources

        This would be useful in porting to an environment which has little
        support for the tools used to generate the sources, e.g., sed, awk and
        Bourne-shell.

        When ncurses has been successfully cross-compiled, you may want to use
        "make install" (with a suitable target directory) to construct an
        install tree.  Note that in this case (as with the --with-fallbacks
        option), ncurses uses the development platform's tic to do the
        "make install.data" portion.

        The system's tic program is used to install the terminal database,
        even for cross-compiles.  For best results, the tic program should
        be from the most current version of ncurses.

BUGS:
        Send any feedback to the ncurses mailing list at
        bug-ncurses@gnu.org. To subscribe send mail to
        bug-ncurses-request@gnu.org with body that reads:
        subscribe ncurses <your-email-address-here>

        The Hacker's Guide in the doc directory includes some guidelines
        on how to report bugs in ways that will get them fixed most quickly.

-- vile:txtmode