ncurses 6.2 - patch 20200531

[ncurses.git] / misc / terminfo.src

######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
#
# This version of terminfo.src is distributed with ncurses and is maintained
# by Thomas E. Dickey (TD).
#
# Report bugs and new terminal descriptions to
#       bug-ncurses@gnu.org
#
#       $Revision: 1.802 $
#       $Date: 2020/05/30 21:37:01 $
#
# The original header is preserved below for reference.  It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
# stopped updates several years ago); we have decided to not change the header
# unless there is also a change in content.
#
# To further muddy the waters, it is noted that changes to this file as part of
# maintenance of ncurses (since 1996) are generally conceded to be copyright
# under the ncurses MIT-style license.  That was the effect of the agreement
# which the principal authors of ncurses made in 1998.  However, since much of
# the file itself is of unknown authorship (and the disclaimer below makes it
# obvious that Raymond cannot or will not convey rights over those parts),
# there is no explicit copyright notice on the file itself.
#
# It would also be a nuisance to split the file into unknown/known authorship
# and move pieces as they are maintained, since many of the maintenance changes
# have been small corrections to Raymond's translations to/from termcap format,
# correcting the data but not the accompanying annotations.
#
# In any case, note that almost half of this file is not data but annotations
# which reflect creative effort.  Furthermore, the structure of entries to
# reuse common chunks also is creative (and subject to copyright).  Finally,
# some portions of the data are derivative work under a compatible MIT-style
# license from xterm.
#
#------------------------------------------------------------------------------
# https://invisible-island.net/ncurses/ncurses.faq.html#terminfo_copying
# https://invisible-island.net/personal/copyrights.html#removing_notes
#------------------------------------------------------------------------------
#
#       Version 10.2.1
#       terminfo syntax
#
#       Eric S. Raymond         (current maintainer)
#       John Kunze, Berkeley
#       Craig Leres, Berkeley
#
# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
# address is no longer valid.  The latest version can always be found at
# <http://www.tuxedo.org/terminfo>.
#
# PURPOSE OF THIS FILE:
#
# This file describes the capabilities of various character-cell terminals,
# as needed by software such as screen-oriented editors.
#
# Other terminfo and termcap files exist, supported by various OS vendors
# or as relics of various older versions of UNIX.  This one is the longest
# and most comprehensive one in existence.  It subsumes not only the entirety
# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
# termcap file, but also large numbers of vendor-maintained termcap and
# terminfo entries more complete and carefully tested than those in historical
# termcap/terminfo versions.
#
# Pointers to related resources (including the ncurses distribution) may
# be found at <http://www.tuxedo.org/terminfo>.
#
# INTERNATIONALIZATION:
#
# This file uses only the US-ASCII character set (no ISO8859 characters).
#
# This file assumes a US-ASCII character set. If you need to fix this, start
# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
# for your character set.  \E(A and \E)A enables the British character set
# with the pound sign at position 2/3.
#
# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
# C1 characters are considered the first-byte set of the Japanese encodings,
# so \E)0 should be avoided in <enacs> and initialization strings.
#
# FILE FORMAT:
#
# The version you are looking at may be in any of three formats: master
# (terminfo with OT capabilities), stock terminfo, or termcap.  You can tell
# which by the format given in the header above.
#
# The master format is accepted and generated by the terminfo tools in the
# ncurses suite; it differs from stock (System V-compatible) terminfo only
# in that it admits a group of capabilities (prefixed `OT') equivalent to
# various obsolete termcap capabilities.  You can, thus, convert from master
# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
# you have ncurses `tic -I' is nicer (among other things, it automatically
# outputs entries in a canonical form).
#
# The termcap version is generated automatically from the master version
# using tic -C.  This filtering leaves in the OT capabilities under their
# original termcap names.  All translated entries fit within the 1023-byte
# string-table limit of archaic termcap libraries except where explicitly
# noted below.  Note that the termcap translation assumes that your termcap
# library can handle multiple tc capabilities in an entry. 4.4BSD has this
# capability.  Older versions of GNU termcap, through 1.3, do not.
#
# For details on these formats, see terminfo(5) in the ncurses distribution,
# and termcap(5) in the 4.4BSD Unix Programmer's Manual.  Be aware that 4.4BSD
# curses has been declared obsolete by the caretakers of the 4.4BSD sources
# as of June 1995; they are encouraging everyone to migrate to ncurses.
#
# Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
# no entry in this file has embedded comments.  This is so source translation
# to termcap only has to carry over leading comments.  Also, no name field
# contains embedded whitespace (such whitespace confuses rdist).
#
# Further note: older versions of this file were often installed with an editor
# script (reorder) that moved the most common terminal types to the front of
# the file.  This should no longer be necessary, as the file is now ordered
# roughly by type frequency with ANSI/VT100 and other common types up front.
#
# Some information has been merged in from terminfo files distributed by
# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below).  Much information
# comes from vendors who maintain official terminfos for their hardware
# (notably DEC and Wyse).
#
# A detailed change history is included at the end of this file.
#
# FILE ORGANIZATION:
#
# Comments in this file begin with # - they cannot appear in the middle
# of a terminfo/termcap entry (this feature had to be sacrificed in order
# to allow standard terminfo and termcap syntax to be generated cleanly from
# the master format).  Individual capabilities are commented out by
# placing a period between the colon and the capability name.
#
# The file is divided up into major sections (headed by lines beginning with
# the string "########") and minor sections (beginning with "####"); do
#
#       grep "^####" <file> | more
#
# to see a listing of section headings.  The intent of the divisions is
# (a) to make it easier to find things, and (b) to order the database so
# that important and frequently-encountered terminal types are near the
# front (so that you'll get reasonable search efficiency from a linear
# search of the termcap form even if you don't use reorder).  Minor sections
# usually correspond to manufacturers or standard terminal classes.
# Parenthesized words following manufacturer names are type prefixes or
# product line names used by that manufacturers.
#
# HOW TO READ THE ENTRIES:
#
# The first name in an entry is the canonical name for the model or
# type, last entry is a verbose description.  Others are mnemonic synonyms for
# the terminal.
#
# Terminal names look like <manufacturer> <model> - <modes/options>
# The part to the left of the dash, if a dash is present, describes the
# particular hardware of the terminal.  The part to the right may be used
# for flags indicating special ROMs, extra memory, particular terminal modes,
# or user preferences.
#
# All names should be in lower case, for consistency in typing.
#
# The following are conventionally used suffixes:
#       -2p     Has two pages of memory.  Likewise 4p, 8p, etc.
#       -am     Enable auto-margin.
#       -m      Monochrome.  Suppress color support
#       -mc     Magic-cookie.  Some terminals (notably older Wyses) can
#               only support one attribute without magic-cookie lossage.
#               Their base entry is usually paired with another that
#               uses magic cookies to support multiple attributes.
#       -nam    No auto-margin - suppress <am> capability
#       -nl     No labels - suppress soft labels
#       -ns     No status line - suppress status line
#       -rv     Terminal in reverse video mode (black on white)
#       -s      Enable status line.
#       -vb     Use visible bell (<flash>) rather than <bel>.
#       -w      Wide - in 132 column mode.
# If a name has multiple suffixes and one is a line height, that one should
# go first.  Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
#
# Entries with embedded plus signs are designed to be included through use/tc
# capabilities, not used as standalone entries.
#
# To avoid search clashes, some older all-numeric names for terminals have
# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
# All primary names of terminals now have alphanumeric prefixes.
#
# Comments marked "esr" are mostly results of applying the termcap-compiler
# code packaged with ncurses and contemplating the resulting error messages.
# In many cases, these indicated obvious fixes to syntax garbled by the
# composers.  In a few cases, I was able to deduce corrected forms for garbled
# capabilities by looking at context.  All the information in the original
# entries is preserved in the comments.
#
# In the comments, terminfo capability names are bracketed with <> (angle
# brackets).  Termcap capability names are bracketed with :: (colons).
#
# INTERPRETATION OF USER CAPABILITIES
#
# The System V Release 4 and XPG4 terminfo format defines ten string
# capabilities for use by applications, <u0>...<u9>.   In this file, we use
# certain of these capabilities to describe functions which are not covered
# by terminfo.  The mapping is as follows:
#
#       u9      terminal enquire string (equiv. to ANSI/ECMA-48 DA)
#       u8      terminal answerback description
#       u7      cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
#       u6      cursor position report (equiv. to ANSI/ECMA-48 CPR)
#
# The terminal enquire string <u9> should elicit an answerback response
# from the terminal.  Common values for <u9> will be ^E (on older ASCII
# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
#
# The cursor position request (<u7>) string should elicit a cursor position
# report.  A typical value (for VT100 terminals) is \E[6n.
#
# The terminal answerback description (u8) must consist of an expected
# answerback string.  The string may contain the following scanf(3)-like
# escapes:
#
#       %c      Accept any character
#       %[...]  Accept any number of characters in the given set
#
# The cursor position report (<u6>) string must contain two scanf(3)-style
# %d format elements.  The first of these must correspond to the Y coordinate
# and the second to the %d.  If the string contains the sequence %i, it is
# taken as an instruction to decrement each value after reading it (this is
# the inverse sense from the cup string).  The typical CPR value is
# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
#
# These capabilities are used by tack(1m), the terminfo action checker
# (distributed with ncurses 5.0).
#
# TABSET FILES
#
# All the entries in this file have been edited to assume that the tabset
# files directory is /usr/share/tabset, in conformance with the File Hierarchy
# Standard for Linux and open-source BSD systems.  Some vendors (notably Sun)
# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
#
# No curses package we know of actually uses these files.  If their location
# is an issue, you will have to hand-patch the file locations before compiling
# this file.
#
# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
#
# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
# character-cell terminals are increasingly replaced by X displays, much of
# this file is becoming a historical document (this is part of the reason for
# the new organization, which puts ANSI types, xterm, Unix consoles,
# and vt100 up front in confidence that this will catch 95% of new hardware).
#
# For the terminal types still alive, I'd like to have manufacturer's
# contact data (Internet address and/or snail-mail + phone).
#
# I'm also interested in enriching the comments so that the latter portions of
# the file do in fact become a potted history of VDT technology as seen by
# UNIX hackers.  Ideally, I'd like the headers for each manufacturer to
# include its live/dead/out-of-the-business status, and for as many
# terminal types as possible to be tagged with information like years
# of heaviest use, popularity, and interesting features.
#
# I'm especially interested in identifying the obscure entries listed under
# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
# wisdom about them gets lost.  If you know a lot about obscure old terminals,
# please go to the terminfo resource page, grab the UFO file (ufo.ti), and
# eyeball it for things you can identify and describe.
#
# If you have been around long enough to contribute, please read the file
# with this in mind and send me your annotations.
#
# COPYRIGHTS AND OTHER DELUSIONS
#
# The BSD ancestor of this file had a standard Regents of the University of
# California copyright with dates from 1980 to 1993.
#
# Some information has been merged in from a terminfo file SCO distributes.
# It has an obnoxious boilerplate copyright which I'm ignoring because they
# took so much of the content from the ancestral BSD versions of this file
# and didn't attribute it, thereby violating the BSD Regents' copyright.
#
# Not that anyone should care.  However many valid functions copyrights may
# serve, putting one on a termcap/terminfo file with hundreds of anonymous
# contributors makes about as much sense as copyrighting a wall-full of
# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
#
# This file deliberately has no copyright.  It belongs to no one and everyone.
# If you claim you own it, you will merely succeed in looking like a fool.
# Use it as you like.  Use it at your own risk.  Copy and redistribute freely.
# There are no guarantees anywhere.  Svaha!
#

######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
#
# This section describes terminal classes and brands that are still
# quite common.
#

#### Specials
#
# Special "terminals".  These are used to label tty lines when you don't
# know what kind of terminal is on it.  The characteristics of an unknown
# terminal are the lowest common denominator - they look about like a ti 700.
#

dumb|80-column dumb tty,
        am,
        cols#80,
        bel=^G, cr=\r, cud1=\n, ind=\n,
unknown|unknown terminal type,
        gn, use=dumb,
lpr|printer|line printer,
        OTbs, hc, os,
        cols#132, lines#66,
        bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
glasstty|classic glass tty interpreting ASCII control characters,
        OTbs, am,
        cols#80,
        bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
        kcud1=\n, nel=\r\n, .kbs=^H,

vanilla|dumb tty,
        OTbs,
        bel=^G, cr=\r, cud1=\n, ind=\n,

# This is almost the same as "dumb", but with no prespecified width.
# DEL and ^C are hardcoded to act as kill characters.
# ^D acts as a line break (just like newline).
# It also interprets
#      \033];xxx\007
# for compatibility with xterm -TD
9term|Plan9 terminal emulator for X,
        am,
        OTnl=\n, bel=^G, cud1=\n,

#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
#
# See the end-of-file comment for more on these.
#

# ANSI capabilities are broken up into pieces, so that a terminal
# implementing some ANSI subset can use many of them.
ansi+local1|ANSI normal-mode cursor-keys,
        cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
ansi+local|ANSI normal-mode parameterized cursor-keys,
        cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
        cuu=\E[%p1%dA, use=ansi+local1,
ansi+tabs|ANSI tab-stops,
        cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
ansi+inittabs|ANSI initial tab-stops,
        it#8, use=ansi+tabs,
ansi+erase|ANSI clear screen/line,
        clear=\E[H\E[J, ed=\E[J, el=\E[K,
ansi+rca|ANSI relative cursor-addressing,
        hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
ansi+cup|ANSI absolute cursor-addressing,
        cup=\E[%i%p1%d;%p2%dH, home=\E[H,
ansi+rep|ANSI repeat-character,
        rep=%p1%c\E[%p2%{1}%-%db,
ansi+idl1|ANSI insert/delete one line,
        dl1=\E[M, il1=\E[L,
ansi+idl|ANSI insert/delete lines,
        dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
ansi+idc1|ANSI insert/delete one character,
        dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
ansi+idc|ANSI insert/delete characters,
        dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
ansi+arrows|ANSI normal-mode cursor-keys,
        kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
        khome=\E[H,
ansi+sgr|ANSI graphic renditions,
        blink=\E[5m, invis=\E[8m, rev=\E[7m,
        sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
        sgr0=\E[0m,
ansi+sgrso|ANSI standout only,
        rmso=\E[m, smso=\E[7m,
ansi+sgrul|ANSI underline only,
        rmul=\E[m, smul=\E[4m,
ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
        bold=\E[1m,
        sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
            %;%?%p7%t8;%;m,
        use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
        dim=\E[2m,
        sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
            %;%?%p7%t8;%;m,
        use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,

# ECMA-48 does not specify scroll-regions, but most people consider it to be
# "ANSI" because it is widely-supported.  See ecma+index for the standard form.
ansi+csr|ANSI scroll-region plus cursor save & restore,
        csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,

# The normal (ANSI) flavor of "media copy" building block asserts that
# characters sent to the printer do not echo on the screen. DEC terminals
# can also be put into autoprinter mode, where each line is sent to the
# printer as you move off that line, e.g., by a carriage return.
ansi+pp|ANSI printer port,
        mc5i,
        mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
dec+pp|DEC autoprinter mode,
        mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,

# The IBM PC alternate character set.  Plug this into any Intel console entry.
# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
# ROM graphics for control characters such as the diamond, up- and down-arrow.
# This works with the System V, Linux, and BSDI consoles.  It's a safe bet this
# will work with any Intel console, they all seem to have inherited \E[11m
# from the ANSI.SYS de-facto standard.
klone+acs|alternate character set for ansi.sys displays,
        acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
             \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
             \301w\302x\263y\363z\362{\343|\330}\234~\376,
        rmacs=\E[10m, smacs=\E[11m,

# Highlight controls corresponding to the ANSI.SYS standard.  Most
# console drivers for Intel boxes obey these.  Makes the same assumption
# about \E[11m as klone+acs.  True ANSI/ECMA-48 would have <rmso=\E[27m>,
# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
klone+sgr|attribute control for ansi.sys displays,
        blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
        rmso=\E[m, rmul=\E[m,
        sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
            %t;1%;%?%p9%t;11%;m,
        sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
        use=klone+acs,

# Most Intel boxes do not treat "invis" (invisible) text.
klone+sgr8|attribute control for ansi.sys displays,
        invis=\E[8m,
        sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
            %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
        use=klone+sgr,

# Highlight controls corresponding to the ANSI.SYS standard.  *All*
# console drivers for Intel boxes obey these.  Does not assume \E[11m will
# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
# diamond and arrow characters under curses.
klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
        blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
        rmul=\E[m,
        sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
            %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
        sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
        use=klone+acs,

# KOI8-R (RFC1489) acs (alternate character set)
# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
        acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
             \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
             \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
             \225,
        rmacs=\E[10m, smacs=\E[11m,

# ANSI.SYS color control.  The setab/setaf caps depend on the coincidence
# between SVr4/XPG4's color numbers and ANSI.SYS attributes.  Here are longer
# but equivalent strings that don't rely on that coincidence:
# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
# They match a subset of ECMA-48.
klone+color|color control for ansi.sys and ISO6429-compatible displays,
        colors#8, ncv#3, pairs#64,
        op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,

# This is better than klone+color, it doesn't assume white-on-black as the
# default color pair,  but many `ANSI' terminals don't grok the <op> cap.
ecma+color|color control for ECMA-48-compatible terminals,
        AX,
        colors#8, ncv#3, pairs#64,
        op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,

ecma+italics|ECMA-48 italics,
        ritm=\E[23m, sitm=\E[3m,

# Attribute control for ECMA-48-compatible terminals
ecma+sgr|attribute capabilities for true ECMA-48 terminals,
        rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,

ecma+strikeout|ECMA-48 strikeout/crossed-out,
        rmxx=\E[29m, smxx=\E[9m,

# ECMA-48 does not include the VT100 indexing and scroll-margins.  It has its
# own variation.
ecma+index|ECMA-48 scroll up/down,
        indn=\E[%p1%dS, rin=\E[%p1%dT,

# For comparison, here are all the capabilities implied by the Intel
# Binary Compatibility Standard (level 2) that fit within terminfo.
# For more detail on this rather pathetic standard, see the comments
# near the end of this file.
ibcs2|Intel Binary Compatibility Standard prescriptions,
        cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
        cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
        dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
        hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
        il=\E[%p1%dL, rc=\E7, rmam=\E[?7l, sc=\E7, smam=\E[?7h,
        tbc=\E[g, vpa=\E[%i%p1%dd, use=ecma+index,

#### ANSI/ECMA-48 terminals and terminal emulators
#
# See near the end of this file for details on ANSI conformance.
# Don't mess with these entries!  Lots of other entries depend on them!
#
# This section lists entries in a least-capable to most-capable order.
# if you're in doubt about what `ANSI' matches yours, try them in that
# order and back off from the first that breaks.

# ansi-mr is for ANSI terminals with ONLY relative cursor addressing
# and more than one page of memory.  It uses local motions instead of
# direct cursor addressing, and makes almost no assumptions. It does
# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
ansi-mr|mem rel cup ansi,
        am, xon,
        cols#80, lines#24, use=vanilla, use=ansi+erase,
        use=ansi+local1,

# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
# beware of screen size problems and memory relative cursor addressing.
ansi-mini|any ansi terminal with pessimistic assumptions,
        am, xon,
        cols#80, lines#24, use=vanilla, use=ansi+cup,
        use=ansi+erase,

# ansi-mtabs adds relative addressing and minimal tab support
ansi-mtabs|any ansi terminal with pessimistic assumptions,
        it#8,
        ht=^I, use=ansi-mini, use=ansi+local1,

# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
#
# The following is an entry for the full ANSI 3.64 (1977).  It lacks
# padding, but most terminals using the standard are "fast" enough
# not to require any -- even at 9600 bps.  If you encounter problems,
# try including the padding specifications.
#
# Note: the :as: and :ae: specifications are not implemented here, for
# the available termcap documentation does not make clear WHICH alternate
# character set to specify.  ANSI 3.64 seems to make allowances for several.
# Please make the appropriate adjustments to fit your needs -- that is
# if you will be using alternate character sets.
#
# There are very few terminals running the full ANSI 3.64 standard,
# so I could only test this entry on one verified terminal (Visual 102).
# I would appreciate the results on other terminals sent to me.
#
# Please report comments, changes, and problems to:
#
# U.S. MAIL:   Hugh Hansard
#              Box: 22830
#              Emory University
#              Atlanta, GA. 30322.
#
# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
#
# (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
ansi77|ANSI 3.64 standard 1977 version,
        OTbs, am, mir,
        cols#80, it#8, lines#24,
        bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
        cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
        cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
        home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
        kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
        rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
        smso=\E[7m, smul=\E[4m,

# Procomm and some other ANSI emulations don't recognize all of the ANSI-
# standard capabilities.  This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
# <cuf1>, <cud1> and <cub1>.  Also deleted <ich> and <ich1>, as QModem up to
# 5.03 doesn't recognize these.  Finally, we delete <rep> and <ri>, which seem
# to confuse many emulators.  On the other hand, we can count on these programs
# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
# ANSI.SYS influence.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
        OTbs, am, mir, msgr,
        cols#80, it#8, lines#24,
        bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
        cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
        dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
        hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
        kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
        use=klone+sgr-dumb,
pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
        lines#25, use=pcansi-m,
pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
        lines#33, use=pcansi-m,
pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
        lines#43, use=pcansi-m,
# The color versions.  All PC emulators do color...
pcansi|ibm-pc terminal programs claiming to be ansi,
        use=klone+color, use=pcansi-m,
pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
        lines#25, use=pcansi,
pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
        lines#33, use=pcansi,
pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
        lines#43, use=pcansi,

# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
# If you want pound signs rather than dollars, replace `B' with `A'
# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
        mc5i,
        cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
        cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
        ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
        ich=\E[%p1%d@, il=\E[%p1%dL, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
        kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kich1=\E[L, mc4=\E[4i,
        mc5=\E[5i, nel=\r\E[S, rep=%p1%c\E[%p2%{1}%-%db,
        s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
        vpa=\E[%i%p1%dd, use=ecma+index, use=pcansi-m,

ansi+enq|ncurses extension for ANSI ENQ,
        u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
        u9=\E[c,

# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
# standard terminfo.  Assumes ANSI.SYS-compatible attributes and color.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
ansi|ansi/pc-term compatible with color,
        use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,

# ansi-generic is a vanilla ANSI terminal. This is assumed to implement
# all the normal ANSI stuff with no extensions. It assumes
# insert/delete line/char is there, so it won't work with
# vt100 clones. It assumes video attributes for bold, blink,
# underline, and reverse, which won't matter much if the terminal
# can't do some of those. Padding is assumed to be zero, which
# shouldn't hurt since xon/xoff is assumed.
ansi-generic|ansiterm|generic ansi standard terminal,
        am, xon,
        cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
        use=ansi+rca, use=ansi+erase, use=ansi+tabs,
        use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
        use=ansi+sgrbold, use=ansi+arrows,

#### DOS ANSI.SYS variants
#
# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
# documentation (except for the keyboard key reassignment feature, which
# doesn't fit the <pfkey> model well).  The klone+acs sequences were valid
# though undocumented.  The <pfkey> capability is untested but should work for
# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
        OTbs, am, mir, msgr, xon,
        cols#80, lines#25,
        clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
        is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
        khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
        rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
        u7=\E[6n, use=klone+color, use=klone+sgr8,

# Keypad:       Home=\0G        Up=\0H  PrPag=\0I
#               ka1,kh          kcuu1           kpp,ka3
#
#               Left=\0K        5=\0L           Right=\0M
#               kcub1           kb2             kcuf1
#
#               End=\0O         Down=\0P        NxPag=\0Q
#               kc1,kend        kcud1           kc3,knp
#
#               Ins=\0R         Del=\0S
#               kich1           kdch1
#
# On keyboard with 12 function keys,
#       shifted f-keys: F13-F24
#       control f-keys: F25-F36
#       alt f-keys:     F37-F48
# The shift/control/alt keys do not modify each other, but alt overrides both,
# and control overrides shift.
#
# <pfkey> capability for F1-F48 -TD
ansi.sys|ANSI.SYS 3.1 and later versions,
        el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
        kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
        kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
        kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
        kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
        kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
        kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
        kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
        kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
        kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
        kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
        kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
        pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
              %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
              %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
        use=ansi.sys-old,

#
# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
# This should only be used when the terminal emulator cannot redefine the keys.
# Since redefining keys with ansi.sys also affects PC-DOS programs, the key
# definitions must be restored.  If the terminal emulator is quit while in vi
# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
# (^U and ^D are already defined for tn3270).  The ESC is safe for vi but it
# does "beep".  ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
# Note that <kcub1> is always BS, because PC-dos can tolerate this change.
# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
# Consequently the End keypad key could not be set (it is relatively safe and
# actually useful because it sends ^@ O, which beeps and opens a line above).
ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
        is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
            \svi\s9-29-86\n\E[;75;8p,
        rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
             0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
        smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
             \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
        use=ansi.sys,
#
# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
        dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
        is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
        use=ansi.sys,
#
# See ansi.sysk and nansi.sys above.
nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
        dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
        is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
            \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
        use=ansi.sysk,

#### Atari ST terminals

# From Guido Flohr <gufl0000@stud.uni-sb.de>.
#
tw52|tw52-color|Toswin window manager with color,
        bce,
        colors#16, pairs#0x100,
        oc=\Eb?\Ec0, op=\Eb?\Ec0,
        setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
              %{48}%+%c,
        setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
              %{48}%+%c,
        setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
             %{48}%+%c,
        setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
             %{48}%+%c,
        use=tw52-m,
tw52-m|Toswin window manager monochrome,
        ul,
        ma#999,
        bold=\Eya, dch1=\Ea, dim=\EyB,
        is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
        rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
        smso=\EyQ, smul=\EyH, use=at-m,
tt52|Atari TT medium and high resolution,
        lines#30, use=at-color,
st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
        bce,
        colors#16, pairs#0x100,
        is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
        setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
              %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
              %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
              %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
              %{14}%=%t6%e?,
        setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
              %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
              %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
              %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
              %{14}%=%t6%e?,
        setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
             %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
             %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
             %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
             %t6%e?,
        setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
             %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
             %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
             %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
             %t6%e?,
        use=st52,
st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
        am, eo, mir, npc,
        cols#80, it#8, lines#24,
        bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
        cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
        cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
        il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
        kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
        kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
        kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
        kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
        kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
        kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
        rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
tw100|toswin vt100 window mgr,
        eo, mir, msgr, xon,
        colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
        acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
             yzz{{||}}~~,
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
        clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
        cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
        cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
        dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
        hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
        kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
        kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
        kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
        kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
        kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
        knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
        oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
        rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
        rmso=\E[m, rmul=\E[m,
        rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
        sc=\E7,
        setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
             %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
             %=%t3%e7%;m,
        setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
             %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
             %=%t3%e7%;m,
        sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
        smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# The entries for stv52 and stv52pc probably need a revision.
stv52|MiNT virtual console,
        am, msgr,
        cols#80, it#8, lines#30,
        bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
        cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
        cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
        dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
        ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
        kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
        kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
        kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
        kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
        kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
        op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
        rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
        smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
stv52pc|MiNT virtual console with PC charset,
        am, msgr,
        cols#80, it#8, lines#30,
        acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
             \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
             \363z\362{\343|\366}\234~\371,
        bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
        cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
        cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
        dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
        ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
        kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
        kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
        kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
        kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
        kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
        rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
        rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
        smso=\Ep, smul=\EyH,

# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
atari-old|atari st,
        OTbs, am,
        cols#80, it#8, lines#25,
        clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
        cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
        ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
        kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
# UniTerm terminal program for the Atari ST:  49-line VT220 emulation mode
# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
        lines#49,
        is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
# MiNT VT52 emulation. 80 columns, 25 rows.
# MiNT is Now TOS, the operating system which comes with all Ataris now
# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
st52-old|Atari ST with VT52 emulation,
        am, km,
        cols#80, lines#25,
        bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
        cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
        cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
        ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
        kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
        kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
        kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
        kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
        ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
        smcup=\Ee, smso=\Ep,

#### BeOS
#
# BeOS entry for Terminal program Seems to be almost ANSI
beterm|BeOS Terminal,
        am, eo, mir, msgr, xenl, xon,
        colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
        bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
        cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
        ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
        hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
        il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
        kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
        kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
        kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
        kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
        khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
        nel=\r\n, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
        rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
        setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
        setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
        sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
        smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
        vpa=\E[%i%p1%dd,

#### Linux consoles
#

# This entry is good for the 1.2.13 or later version of the Linux console.
#
# ***************************************************************************
# *                                                                         *
# *                           WARNING:                                      *
# * Linuxes come with a default keyboard mapping kcbt=^I.  This entry, in   *
# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
# * character. Here are the keymap replacement lines that will set this up: *
# *                                                                         *
#       keycode  15 = Tab             Tab
#               alt     keycode  15 = Meta_Tab
#               shift   keycode  15 = F26
#       string F26 ="\033[Z"
# *                                                                         *
# * This has to use a key slot which is unfortunate (any unused one will    *
# * do, F26 is the higher-numbered one).  The change ought to be built      *
# * into the kernel tables.                                                 *
# *                                                                         *
# ***************************************************************************
#
# All linux kernels since 1.2.13 (at least) set the screen size
# themselves; this entry assumes that capability.
#
linux-basic|linux console,
        am, bce, eo, mir, msgr, xenl, xon,
        it#8, ncv#18, U8#1,
        acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
             \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
             \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
        bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
        cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
        cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
        dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
        el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
        hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
        il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
        kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
        kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
        kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
        kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
        kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
        khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
        kspd=^Z, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
        rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
        sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
            %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
        smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
        vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
        use=ecma+color,

linux-m|Linux console no color,
        colors@, pairs@,
        setab@, setaf@, setb@, setf@, use=linux,

# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
# and it matters, turn off <ccc>.  The %02x escape used to implement this is
# not supposedly back-portable to older SV curses (although it has worked fine
# on Solaris for several years) and not supported in ncurses versions before
# 1.9.9.
linux-c-nc|linux console with color-change,
        ccc,
        initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
              %02x%p4%{255}%*%{1000}%/%02x,
        oc=\E]R, use=linux-basic,
# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
linux-c|linux console 1.3.6+ for older ncurses,
        ccc,
        initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
              %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
              %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
              %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
              %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
              %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
              %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
              %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
              %d%;,
        oc=\E]R, use=linux-basic,

# The 2.2.x kernels add a private mode that sets the cursor type; use that to
# get a block cursor for cvvis.
# reported by Frank Heckenbach <frank@g-n-u.de>.
linux2.2|linux 2.2.x console,
        civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
        cvvis=\E[?25h\E[?8c, use=linux-c-nc,

# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
#       http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
# Although the kernel has mappings for these, they were not in the default
# font (tested with Debian and Fedora):
#       '`' diamond
#       '~' scan line 1
#       'p' scan line 3
#       'r' scan line 7
#       '_' scan line 9
linux2.6|linux 2.6.x console,
        acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
             xyyzz{{||}c~~,
        enacs=\E)0, rmacs=^O,
        sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
            %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
        sgr0=\E[m\017, smacs=^N, use=linux2.2,

# The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
# It is the same as xterm's erase-saved-lines feature.
linux3.0|linux 3.0 kernels,
        E3=\E[3J, use=linux2.6,

# This is Linux console for ncurses.
linux|linux console,
        use=linux3.0,

# Subject: linux 2.6.26 vt back_color_erase
# Changes to the Linux console driver broke bce model as reported in
#       https://bugzilla.novell.com/show_bug.cgi?id=418613
# apparently from
#       http://lkml.org/lkml/2008/4/26/305
#       http://lkml.org/lkml/2008/10/3/66
linux2.6.26|linux console w/o bce,
        bce@, use=linux2.6,

# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
linux-nic|linux with ich/ich1 suppressed for non-curses programs,
        ich@, ich1@, use=linux,

# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
linux-koi8|linux with koi8 alternate character set,
        acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
             \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
             \211w\210x\201y\230z\231{\267|\274~\224,
        use=linux, use=klone+koi8acs,

# Another entry for KOI8-r with Qing Long's acsc.
# (which one better complies with the standard?)
linux-koi8r|linux with koi8-r alternate character set,
        use=linux, use=klone+koi8acs,

# Entry for the latin1 and latin2 fonts
linux-lat|linux with latin1 or latin2 alternate character set,
        acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
             \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
             \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
        use=linux,

# This uses graphics from VT codeset instead of from cp437.
# reason: cp437 (aka "straight to font") is not functional under luit.
# from: Andrey V Lukyanov <land@long.yar.ru>.
linux-vt|linux console using VT codes for graphics,
        acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
             yzz~~,
        rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
        smpch@, use=linux,

# This is based on the Linux console (relies on the console to perform some
# of the functionality), but does not recognize as many control sequences.
# The program comes bundled with an old (circa 1998) copy of the Linux
# console terminfo.  It recognizes some non-ANSI/VT100 sequences such as
#       \E*     move cursor to home, as as \E[H
#       \E,X    same as \E(X
#       \EE     move cursor to beginning of row
#       \E[y,xf same as \E[y,xH
#
# Note: The status-line support is buggy (dsl does not work).
kon|kon2|jfbterm|Kanji ON Linux console,
        ccc@, hs,
        civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
        initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
        use=linux,

# FbTerm
# Another variant.  There are two parts (src, src/lib) with the latter
# comprising the escape-sequence parsing.  The copyright notice on that
# says it is based on GTerm by Timothy Miller.
#
# The original developer "dragchan" has left, but as of March 2017 there is
# (still dead) code from May 2015 here:
#       https://github.com/izmntuk/fbterm
#
# The acsc string may be incorrect.
#
# Not used here, the program recognizes escapes for italic, underline and
# dim, rendering those as green, cyan and gray respectively.
fbterm|FbTerm for Linux with framebuffer,
        colors#0x100, pairs#0x10000,
        acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
             \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
             \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
        initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
        setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
        sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
            %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
        sgr0=\E[0;10m, smacs=\E[11m, use=linux,

# 16-color linux console entry; this works with a 256-character
# console font but bright background colors turn into dim ones when
# you use a 512-character console font. This uses bold for bright
# foreground colors and blink for bright background colors.
#
# Interestingly, the original version of this entry in 2009 used a documented
# (but nonstandard) SGR 21, which was supported in the Linux console since 1992
# as an equivalent for SGR 22.  Long after (early 2018), someone modified the
# console driver to make it ignore SGR 21 because the ECMA-48 standard
# suggested a different use for that particular code:
#
# https://github.com/torvalds/linux/commit/65d9982d7e523a1a8e7c9af012da0d166f72fc56#diff-7da3c215d12c9f6b88e1a37d38b116f0
#
# Two years later, someone (unfamiliar with ECMA-48 this time) documented it:
#
# https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/man4/console_codes.4?id=a133a6bc03d751a424fe0a4adea2198757599615
#
# For background, refer to the report on bug-ncurses:
#
# https://lists.gnu.org/archive/html/bug-ncurses/2019-10/msg00059.html
linux-16color|linux console with 16 colors,
        colors#16, ncv#42, pairs#0x100,
        setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
        setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;22%;m,
        use=linux,

# bterm (bogl 0.1.18)
# Implementation is in bogl-term.c
# Key capabilities from linux terminfo entry
#
# Notes:
# bterm only supports acs using wide-characters, has case for these: qjxamlkut
# bterm does not support sgr, since it only processes one parameter -TD
bterm|bogl virtual terminal,
        am, bce,
        colors#8, cols#80, lines#24, pairs#64,
        acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
        clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
        cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=\n,
        kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
        kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
        kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
        kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
        kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
        kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
        kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
        kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n,
        op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
        rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
        sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,

#### Mach
#

# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
mach|Mach Console,
        am, km,
        cols#80, it#8, lines#25,
        bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
        cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
        cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
        el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
        kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
        kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
        kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
        kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
        kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
        smso=\E[7m, smul=\E[4m,
mach-bold|Mach Console with bold instead of underline,
        rmul=\E[0m, smul=\E[1m, use=mach,
mach-color|Mach Console with ANSI color,
        colors#8, pairs#64,
        dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
        setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,

# From: Samuel Thibault
# Source: git://git.sv.gnu.org/hurd/gnumach.git
# Files: i386/i386at/kd.c
#
# Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
mach-gnu|GNU Mach,
        acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
             \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
             \263y\363z\362{\343|\330}\234~\376,
        dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
        el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
        invis=\E[8m, nel=\EE,
        sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
            2%;%?%p6%t;1%;%?%p7%t;8%;m,
        use=ecma+index, use=mach,

mach-gnu-color|Mach Console with ANSI color,
        colors#8, pairs#64,
        op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
        setaf=\E[3%p1%dm, use=mach-gnu,

# From: Marcus Brinkmann
# http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/
#
# Comments in the original are summarized here:
#
# hurd uses 8-bit characters (km).
#
# Although it doesn't do XON/XOFF, we don't want padding characters (xon).
#
# Regarding compatibility to vt100:  hurd doesn't specify <xenl>, as we don't
# have the eat_newline_glitch.  It doesn't support setting or removing tab
# stops (hts/tbc).
#
# hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
# one byte instead three.
#
# <ich1> is not included because hurd has insert mode.
#
# hurd doesn't use ^J for scrolling, because this could put things into the
# scrollback buffer.
#
# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
# This is a GNU extension.
#
# The original has commented-out ncv, but is restored here.
#
# Reading the source, RIS resets cnorm, but not xmous.
hurd|The GNU Hurd console server,
        am, bce, bw, eo, km, mir, msgr, xenl, xon,
        colors#8, it#8, ncv#18, pairs#64,
        acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
             yzz{{||}}~~,
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
        clear=\Ec, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
        cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
        cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
        dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
        ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
        home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
        il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m, kb2=\E[G,
        kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
        kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
        kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
        kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
        kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
        kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
        khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
        kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
        rmacs=\E[10m, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
        rs1=\EM\E[?1000l, sc=\E7, setab=\E[4%p1%dm,
        setaf=\E[3%p1%dm,
        sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
            2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
        sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
        smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h,
        use=ecma+index, use=ecma+italics,

#### QNX
#

# QNX 4.0 Console
# Michael's original version of this entry had <am@>, <smcup=\Ei>,
# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
# right corner without triggering a scroll.  The ncurses terminfo library can
# handle this case with the <ich1> capability, and prefers <am> for better
# optimization.  Bug: The <op> capability resets attributes.
# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
qnx|qnx4|qnx console,
        daisy, km, mir, msgr, xhpa, xt,
        colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
        acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
             \303u\264v\301w\302x\263,
        bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
        cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
        cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
        dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
        il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
        kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
        kDL=\377\366, kEND=\377\301, kEOL=\377\311,
        kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
        kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
        kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
        kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
        kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
        kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
        kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
        kclo=\377\343, kclr=\377\341, kcmd=\377\245,
        kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
        kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
        kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
        ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
        kext=\377\270, kf1=\377\201, kf10=\377\212,
        kf11=\377\256, kf12=\377\257, kf13=\377\213,
        kf14=\377\214, kf15=\377\215, kf16=\377\216,
        kf17=\377\217, kf18=\377\220, kf19=\377\221,
        kf2=\377\202, kf20=\377\222, kf21=\377\223,
        kf22=\377\224, kf23=\377\333, kf24=\377\334,
        kf25=\377\225, kf26=\377\226, kf27=\377\227,
        kf28=\377\230, kf29=\377\231, kf3=\377\203,
        kf30=\377\232, kf31=\377\233, kf32=\377\234,
        kf33=\377\235, kf34=\377\236, kf35=\377\276,
        kf36=\377\277, kf37=\377\321, kf38=\377\322,
        kf39=\377\323, kf4=\377\204, kf40=\377\324,
        kf41=\377\325, kf42=\377\326, kf43=\377\327,
        kf44=\377\330, kf45=\377\331, kf46=\377\332,
        kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
        kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
        khlp=\377\350, khome=\377\240, khts=\377\342,
        kich1=\377\253, kil1=\377\273, kind=\377\261,
        kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
        knp=\377\252, knxt=\377\312, kopn=\377\357,
        kopt=\377\353, kpp=\377\242, kprt=\377\255,
        kprv=\377\302, krdo=\377\336, kref=\377\354,
        kres=\377\360, krfr=\377\347, kri=\377\271,
        krmir=\377\313, krpl=\377\362, krst=\377\352,
        ksav=\377\361, kslt=\377\247, kspd=\377\335,
        ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
        rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
        rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
        setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
        smso=\E(, smul=\E[,
#
#
qnxt|qnxt4|QNX4 terminal,
        crxm, use=qnx4,
#
qnxm|QNX4 with mouse events,
        maddr#1,
        chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
        mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
        mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
        smicm=\E/>2h, use=qnx4,
#
qnxw|QNX4 windows,
        xvpa, use=qnxm,
#
#       Monochrome QNX4 terminal or console. Setting this terminal type will
#       allow an application running on a color console to behave as if it
#       were a monochrome terminal. Output will be through stdout instead of
#       console writes because the term routines will recognize that the
#       terminal name starts with 'qnxt'.
#
qnxtmono|Monochrome QNX4 terminal or console,
        colors@, pairs@,
        scp@, use=qnx4,

# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
# (esr: commented out <scp> and <rmcup> to avoid warnings.)
# (TD: derive from original qnx4 entry)
qnxt2|qnx 2.15 serial terminal,
        am,
        civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
        rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,

# QNX ANSI terminal definition
qansi-g|QNX ANSI,
        am, eslok, hs, xon,
        colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
        acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
        clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=\r,
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
        cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
        cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
        dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
        el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
        fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
        ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
        ind=\E[S, invis=\E[9m,
        is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
        kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
        kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
        kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
        kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
        kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
        kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
        kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
        kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
        kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
        kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
        kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
        kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
        kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
        kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
        kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
        kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
        kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
        khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
        kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
        kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
        kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
        ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
        rev=\E[7m, ri=\E[T, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
        rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
        setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
             %=%t3%e%p1%d%;m,
        setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
             %=%t3%e%p1%d%;m,
        sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
            %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
        sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
        smul=\E[4m, tbc=\E[3g,
        tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=ansi+rep,
        use=ecma+index,
#
qansi|QNX ansi with console writes,
        daisy, xhpa, use=qansi-g,
#
qansi-t|QNX ansi without console writes,
        crxm, use=qansi,
#
qansi-m|QNX ansi with mouse,
        maddr#1,
        chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
        mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
        mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
        smicm=\E[>2h, use=qansi,
#
qansi-w|QNX ansi for windows,
        xvpa, use=qansi-m,

#### SCO consoles

# SCO console and SOS-Syscons console for 386bsd
# (scoansi: had unknown capabilities
#       :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
#       :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
#       :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
#       :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
#       :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
# on the <smacs>=\E[12m  -- esr)
#
# klone+sgr-dumb is an error since the acsc does not match -TD
#
# In this description based on SCO's keyboard(HW) manpage list of default
# function key values:
#       F13-F24 are shifted F1-F12
#       F25-F36 are control F1-F12
#       F37-F48 are shift+control F1-F12
#
# hpa/vpa work in the console, but not in scoterm:
#       hpa=\E[%p1%dG,
#       vpa=\E[%p1%dd,
#
# SCO's terminfo uses
#       kLFT=\E[d,
#       kRIT=\E[c,
# which do not work (console or scoterm).
#
# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
scoansi-old|SCO Extended ANSI standard crt (5.0.5),
        OTbs, am, bce, eo, xon,
        colors#8, cols#80, it#8, lines#25, pairs#64,
        acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM
             NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB
             x3yszr{c}\034~\207,
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
        civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
        cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
        cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
        dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
        ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
        hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
        ind=\E[S, invis=\E[8m, kbeg=\E[E, kbs=^H, kcbt=\E[Z,
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
        kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X,
        kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
        kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
        kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
        kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
        kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
        kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
        kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
        kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
        kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
        knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, rev=\E[7m,
        ri=\E[T, rmacs=\E[10m, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
        sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
        sgr0=\E[0;10m, smacs=\E[12m, smam=\E[?7h, smso=\E[7m,
        smul=\E[4m, use=ecma+index,
scoansi-new|SCO Extended ANSI standard crt (5.0.6),
        km,
        civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
        cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
        rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
        sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
            %p7%t;8%;%?%p9%t;12%e;10%;m,
        smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
        smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
        smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
        smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
        wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
        use=scoansi-old,
# make this easy to change...
scoansi|SCO Extended ANSI standard crt,
        use=scoansi-old,

#### SGI consoles

# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
# from SGI's terminfo database.  SGI's entry shows F9-F12 with the codes
# for the application keypad mode.  We have added iris-ansi-ap rather than
# change the original to keypad mode.
#
# (iris-ansi: added rmam/smam based on init string -- esr)
#
# This entry, and those derived from it, is used in xwsh (also known as
# winterm).  Some capabilities that do not fit into the terminfo model
# include the shift- and control-functionkeys:
#
# F1-F12 generate different codes when shift or control modifiers are used.
# For example:
#       F1              \E[001q
#       shift F1        \E[013q
#       control-F1      \E[025q
#
# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
# \EOP to \EOS.  The shifted and control modifiers still do the same thing.
#
# The cursor keys also have different codes:
#       control-up      \E[162q
#       control-down    \E[165q
#       control-left    \E[159q
#       control-right   \E[168q
#
#       shift-up        \E[161q
#       shift-down      \E[164q
#       shift-left      \E[158q
#       shift-right     \E[167q
#
#       control-tab     \[072q
#
iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
        am,
        cols#80, it#8, lines#40,
        bel=^G, bold=\E[1m, clear=\E[H\E[2J,
        cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
        cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
        cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
        cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
        dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
        home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
        is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
        kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
        kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
        kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
        kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
        kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
        kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
        kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
        kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
        nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
        rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
        sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
        tbc=\E[3g,
iris-ansi-ap|IRIS ANSI in application-keypad mode,
        is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
        kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,

# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
# (T.Dickey 98/1/24)
iris-color|xwsh|IRIX ANSI with color,
        ncv#33,
        csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
        ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, rmul=\E[24m, rs1=\Ec,
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
        use=ecma+italics, use=vt100+enq, use=klone+color,
        use=iris-ansi-ap,

#### OpenBSD consoles
#
# From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
#
# The following terminal descriptions for the  AMD/Intel PC console
# were prepared  based on information contained in  the OpenBSD-4.9
# termtypes.master and wscons(4) & vga(4) manuals (2010, November).
#
# Added bce based on testing with tack -TD
# Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
# Changed kbs to DEL and removed keys that duplicate stty settings -TD
#
# Notes from testing with vttest:
#       fails wrapping test
#       no 8-bit controls
#       identifies as vt200 with selective erase, but does not implement DECSCA
#       no vt52 mode
#       also lacks these:
#               ESC # 8   DEC Screen Alignment Test (DECALN).
#               CSI ? 5 h Reverse Video (DECSCNM).
#
pccon+keys|OpenBSD PC keyboard keys,
        kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
        kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
        kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
        kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
        kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
        kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
        kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
        kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
        krfr=^R,
pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
        acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y
             #z#{*|!}#~o,
        sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
        sgr0=\E[m,
pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
        acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
             yzz{{||}}~~,
        enacs=\E)0$<5>, rmacs=\E(B$<5>,
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
            \E(B%;$<2>,
        sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
# underline renders as color
pccon+colors|ANSI colors for OpenBSD PC console,
        bce,
        colors#8, ncv#2, pairs#64,
        op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
pccon+base|base capabilities for OpenBSD PC console,
        am, km, mc5i, msgr, npc, nxon, xenl, xon,
        cols#80, it#8, lines#24,
        bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
        cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
        dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
        el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
        il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
        rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h,
        smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
        u7=\E[6n,
pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
        use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
pccon0|OpenBSD PC console with simple ASCII pseudographics,
        use=pccon0-m, use=pccon+colors,
pccon-m|OpenBSD PC console without colors,
        use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
pccon|OpenBSD PC console,
        use=pccon-m, use=pccon+colors,

#### NetBSD consoles
#
# pcvt termcap database entries (corresponding to release 3.31)
# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
#
# (For the terminfo master file, I translated these into terminfo syntax.
# Then I dropped all the pseudo-HP entries. we don't want and can't use
# the :Xs: flag. Then I split :is: into a size-independent <is1> and a
# size-dependent <is2>.  Finally, I added <rmam>/<smam> -- esr)

# NOTE: <ich1> has been taken out of this entry. for reference, it should
# be <ich1=\E[@>.  For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
pcvtXX|pcvt vt200 emulator (DEC VT220),
        am, km, mir, msgr, xenl,
        it#8, vt#3,
        acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
             yzz~~,
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
        clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
        cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
        el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
        il=\E[%p1%dL, il1=\E[L, ind=\ED,
        is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
        kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
        kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
        kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
        khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
        nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
        ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
        rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
        rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
        sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
        smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
        use=ecma+index,

#       NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
#       termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
#       50 lines entries; 80 columns
pcvt25|dec vt220 emulation with 25 lines,
        cols#80, lines#25,
        is2=\E[1;25r\E[25;1H, use=pcvtXX,
pcvt28|dec vt220 emulation with 28 lines,
        cols#80, lines#28,
        is2=\E[1;28r\E[28;1H, use=pcvtXX,
pcvt35|dec vt220 emulation with 35 lines,
        cols#80, lines#35,
        is2=\E[1;35r\E[35;1H, use=pcvtXX,
pcvt40|dec vt220 emulation with 40 lines,
        cols#80, lines#40,
        is2=\E[1;40r\E[40;1H, use=pcvtXX,
pcvt43|dec vt220 emulation with 43 lines,
        cols#80, lines#43,
        is2=\E[1;43r\E[43;1H, use=pcvtXX,
pcvt50|dec vt220 emulation with 50 lines,
        cols#80, lines#50,
        is2=\E[1;50r\E[50;1H, use=pcvtXX,

#       NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
#       termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
#       50 lines entries; 132 columns
pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
        cols#132, lines#25,
        is2=\E[1;25r\E[25;1H, use=pcvtXX,
pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
        cols#132, lines#28,
        is2=\E[1;28r\E[28;1H, use=pcvtXX,
pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
        cols#132, lines#35,
        is2=\E[1;35r\E[35;1H, use=pcvtXX,
pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
        cols#132, lines#40,
        is2=\E[1;40r\E[40;1H, use=pcvtXX,
pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
        cols#132, lines#43,
        is2=\E[1;43r\E[43;1H, use=pcvtXX,
pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
        cols#132, lines#50,
        is2=\E[1;50r\E[50;1H, use=pcvtXX,

#       OpenBSD implements a color variation
pcvt25-color|dec vt220 emulation with 25 lines and color,
        cols#80, lines#25,
        is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
        kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
        kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
        kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
        kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
        use=ecma+color,

# Terminfo entries to enable the use of the ncurses library in colour on a
# NetBSD-arm32 console (only tested on a RiscPC).
# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
# modified codes for setf/setb to setaf/setab, then to klone+color, corrected
# typo in invis - TD
arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
        am, bce, msgr, xenl, xon,
        cols#80, it#8, lines#30,
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
        clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
        cuf=\E[%p1%dC, cuf1=\E[C$<2>,
        cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
        cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
        enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
        invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
        kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
        kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
        kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
        kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
        rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
        rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
        sc=\E7,
        sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
            %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
        sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
        smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
        use=klone+color,

arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
        cols#132, lines#50, use=arm100,

# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
# manufactured by Sharp for the Japanese market.
# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
x68k|x68k-ite|NetBSD/x68k ITE,
        cols#96, lines#32,
        kclr=\E[9~, khlp=\E[28~, use=vt220,

# <tv@pobox.com>:
# Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
#
# (still unfinished, but good enough so far.)
ofcons|DNARD OpenFirmware console,
        bw,
        cols#80, lines#30,
        bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
        cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
        cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
        cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
        dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
        flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
        il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
        kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
        kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
        kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
        kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
        rmso=\2330m, rmul=\2330m,
        sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
            %;%?%p1%p3%|%t;7%;m,
        sgr0=\2330m, smso=\2337m, smul=\2334m,

# NetBSD "wscons" emulator in vt220 mode.
# This entry is based on the NetBSD termcap entry, correcting the ncv value.
# The emulator renders underlined text in red.  Colors are otherwise usable.
#
# Testing the emulator and reading the source code (NetBSD 2.0), it appears
# that "vt220" is inaccurate.  There are a few vt220-features, but most of the
# vt220 screens in vttest do not work with this emulator.  For instance, it
# identifies itself (primary DA response) as a vt220 with selective erase.  But
# the selective erase feature does not work.  The secondary response is copied
# from Kermit's emulation of vt220, does not correspond to actual vt220.  At
# the level of detail in a termcap, it is a passable emulator, since ECH does
# work.  Don't use it on a VMS system -TD
wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
        bce, msgr,
        colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
        civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
        kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
        kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
        kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
        kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
        setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,

wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
        km, use=wsvt25,

# NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
#
# TERM is by default vt100 for the console, wsvt25 for other ttys.
# Initial testing set TERM=xterm, based on comments by developers, found too
# many differences to continue in that path.  However, test-results may be
# useful to people curious about compatibility with xterm.
#
# Testing with tack:
# -----------------
# Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
# There is color-bleeding in the color-pairs screen.
# Attributes do not work with color
# Failed: vpa/hpa
# Failed: kf1-kf4, kf13-kf48, khome, kend
#       (effectively xterm-r6 for function-keys)
# None of the function or cursor key-modifiers are encoded.
# Console hangs in the smm/rmm test if TERM=xterm, does not show test
#
# Testing with vttest:
# -------------------
# Identifies as vt220 with selective erase
#       (however, selective erase refers to DECSCA, SPA)
# Does not implement vt52
# Uses spaces to simulate double-size characters
# Does not support 8-bit controls
# Does not support VT220 reports
# Does not support send/receive mode
# Supports ECH (like rxvt)
# Does not support DECSCA
# Does not support any of the ISO-6429 cursor-movement
# Does not support any of the ISO-6429 miscellaneous tests
#       (SL/SR also leave unexpected char on screen too)
# Background does not change in menu 11.6.9 (SGR 22-27)
# None of the xterm special features tests work
netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
        kbs=^?, use=wsvt25,

# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
# DECstation/pmax.
rcons|BSD rasterconsole,
        use=sun-il,
# Color version of above. Color currently only provided by NetBSD.
rcons-color|BSD rasterconsole with ANSI color,
        bce,
        colors#8, pairs#64,
        op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,

# mgterm -- MGL/MGL2, MobileGear Graphic Library
# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
# -- compare with cons25w
mgterm|MGL/MGL2 MobileGear Graphic Library,
        OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
        colors#8, cols#80, it#8, lines#18, pairs#64,
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
        cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
        cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
        dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
        dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
        home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
        ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
        kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
        kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
        kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q,
        kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
        kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8,
        rev=\E[7m, ri=\E[T, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
        setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m,
        vpa=\E[%i%p1%dd, use=ecma+index,

#### FreeBSD console entries
#
# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
# Andrey Chernov maintains the FreeBSD termcap distributions.
#
# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
# or comment out the :cb: capability in the console entry.
#
# Alexander Lukyanov reports:
# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
# Now el1 clears not only to the line beginning, but also a large chunk
# of previous line. But there is another bug - ech does not work at all.
#

# for syscons
# common entry without semigraphics
# Bug: The <op> capability resets attributes.
# Bug? The ech and el1 attributes appear to move the cursor in some cases; for
# instance el1 does if the cursor is moved to the right margin first.  Removed
# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
#
# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
# Note that this disables standout with color.
#
# The emulator sends difference strings based on shift- and control-keys,
# like scoansi:
#       F13-F24 are shifted F1-F12
#       F25-F36 are control F1-F12
#       F37-F48 are shift+control F1-F12
cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
        am, bce, bw, eo, msgr, npc,
        colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
        cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
        cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
        cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
        dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
        home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
        ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
        kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
        kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
        kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a,
        kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N,
        kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j,
        kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o,
        kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s,
        kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x,
        kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[,
        kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`,
        kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
        khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E,
        op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rmso=\E[m,
        rs2=\E[x\E[m\Ec, sc=\E7, setab=\E[4%p1%dm,
        setaf=\E[3%p1%dm,
        sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
            %p6%t;1%;m,
        sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, use=ecma+index,
cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
        acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
             \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
             \371,
        use=cons25w,
cons25-debian|freebsd console with debian backspace (25-line ansi mode),
        kbs=^?, kdch1=\E[3~, use=cons25,
cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
        colors@, pairs@,
        bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
        sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
        smul=\E[4m, use=cons25,
cons30|ansi80x30|freebsd console (30-line ansi mode),
        lines#30, use=cons25,
cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
        lines#30, use=cons25-m,
cons43|ansi80x43|freebsd console (43-line ansi mode),
        lines#43, use=cons25,
cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
        lines#43, use=cons25-m,
cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
        lines#50, use=cons25,
cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
        lines#50, use=cons25-m,
cons60|ansi80x60|freebsd console (60-line ansi mode),
        lines#60, use=cons25,
cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
        lines#60, use=cons25-m,
cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
        acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
             \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
             \225,
        use=cons25w,
cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
        colors@, pairs@,
        op@, rmul=\E[m, setab@, setaf@,
        sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
            %t;30;1%;%?%p6%t;1%;m,
        smul=\E[4m, use=cons25r,
cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
        lines#50, use=cons25r,
cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
        lines#50, use=cons25r-m,
cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
        lines#60, use=cons25r,
cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
        lines#60, use=cons25r-m,
# ISO 8859-1 FreeBSD console
cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
        acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
             \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
             \226v\227w\230x\231y\232z\233~\237,
        use=cons25w,
cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
        colors@, pairs@,
        bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
        sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
        smul=\E[4m, use=cons25l1,
cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
        lines#50, use=cons25l1,
cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
        lines#50, use=cons25l1-m,
cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
        lines#60, use=cons25l1,
cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
        lines#60, use=cons25l1-m,

# Starting with FreeBSD 8, an alternative configuration for syscons is provided,
# which is intended to be xterm-compatible.  See for example
#       http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
# in particular scterm-teken.c
#
# For FreeBSD 9 and 10:
# --------------------
# The /etc/ttys entries for console and other ttys are all configured to set
# TERM=xterm.
#
# Testing with tack:
# There is no VT100 line-drawing (uses +'s and -'s)
# Shifted f1-f12 give cons25 codes, rather than xterm function-keys
#
# Testing with vttest:
# Menu 2 diamonds don't work, blink ditto, light background ditto
# The terminal identifies itself as VT100 with AVO
# There is no VT52 support
# There is no doublesize character support
# The terminal supports ECH (like rxvt)
# The terminal does not support send/receive mode
# The terminal supports all of the ISO-6429 cursor-movement
# The terminal supports some of the ISO-6429 miscellaneous tests
#       (SL/SR also leave unexpected char on screen too)
#
# Considering cons25 as a base, the line-drawing mostly works, but is missing
# the cells which happen to have ASCII control-character values:
#       -    ^X    arrow pointing up
#       .    ^Y    arrow pointing down
#       i    ^Y    lantern
#       `    ^D    diamond
#
# Those are removed from this entry's acsc string to avoid confusion.
# The resulting description provides correct line-drawing and function-keys -TD
teken|syscons with teken,
        bw@, mir, xenl,
        acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
             \304t\303u\264v\301w\302x\263y\363z\362~\371,
        civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
        hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
        kdch1=\E[3~, kend=\E[F, kent=\r, kf1=\EOP, kf10=\E[21~,
        kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
        kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
        khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
        smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
        u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,

#### 386BSD and BSD/OS Consoles
#

# This was the original 386BSD console entry (I think).
# Some places it's named oldpc3|oldibmpc3.
# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
origpc3|origibmpc3|IBM PC 386BSD Console,
        OTbs, am, bw, eo, xon,
        cols#80, lines#25,
        acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
             \263,
        bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
        cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
        home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
        kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
        rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
        smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,

# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
        OTbs, km,
        lines#25,
        bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
        ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
        kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
        knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,

# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
# Note, the emulator supports many of the additional console features
# listed in the iBCS2 (e.g. character-set selection) though not all
# are described here.  This entry really ought to be upgraded.
# Also note, the console will also work with fewer lines after doing
# "stty rows NN", e.g. to use 24 lines.
# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
# Bug: The <op> capability resets attributes.
bsdos-pc|IBM PC BSD/OS Console,
        sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
            %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
        use=bsdos-pc-nobold,

bsdos-pc-nobold|BSD/OS PC console w/o bold,
        use=klone+color, use=bsdos-pc-m,

bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
        OTbs, am, eo, km, xon,
        cols#80, it#8, lines#25,
        bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
        cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
        dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
        il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
        kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
        kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
        sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
            %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
        use=klone+sgr8,

# Old names for BSD/OS PC console used in releases before 4.1.
pc3|BSD/OS on the PC Console,
        use=bsdos-pc-nobold,
ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
        use=bsdos-pc,

# BSD/OS on the SPARC
bsdos-sparc|Sun SPARC BSD/OS Console,
        use=sun,

# BSD/OS on the PowerPC
bsdos-ppc|PowerPC BSD/OS Console,
        use=bsdos-pc,


#### DEC VT52
# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
#
# Actually (TD pointed this out at the time the acsc string was added):
# vt52 shouldn't define full acsc since most of the cells don't match.
# see vt100 manual page A-31.  This is the list that does match:
#       f degree
#       g plus/minus
#       h right-arrow
#       k down-arrow
#       m scan-1
#       o scan-3
#       q scan-5
#       s scan-7
# The line-drawing happens to work in several terminal emulators, but should
# not be used as a guide to the capabilities of the vt52.  Note in particular
# that vt52 does not support line-drawing characters (the scan-X values refer
# to a crude plotting feature) -TD
vt52|dec vt52,
        OTbs,
        it#8, lines#24,
        acsc=+h.k0affggolpnqprrss, home=\EH, kbs=^H, nel=\r\n,
        ri=\EI, rmacs=\EG, rmkx=\E>, smacs=\EF, smkx=\E=, u8=\E/[KL],
        use=vt50h,

# This is more likely the "vt52" that you would see in emulation, i.e., no
# keypad, no graphics.
vt52-basic|vt52 for emulators,
        cols#80, it#8, lines#24,
        bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
        cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
        home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
        kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI,

#### DEC VT100 and compatibles
#
# DEC terminals from the vt100 forward are collected here. Older DEC terminals
# and micro consoles can be found in the `obsolete' section.  More details on
# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
# found near the end of this file.
#
# Except where noted, these entries are DEC's official terminfos.
# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
# Engineering for more information.  Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
# In October 1995 DEC sold its terminals business, including the VT and Dorio
# line and trademark, to SunRiver Data Systems.  SunRiver has since changed
# its name to Boundless Technologies; see http://www.boundless.com.
#

# NOTE:  Any VT100 emulation, whether in hardware or software, almost
# certainly includes what DEC called the `Level 1 editing extension' codes;
# only the very oldest VT100s lacked these and there probably aren't any of
# those left alive.  To capture these, use one of the VT102 entries.
#
# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
# since the cursor is left in a different position while in the
# weird state (concept at beginning of next line, vt100 at end
# of this line) so all versions of vi before 3.7 don't handle
# <xenl> right on vt100. The correct way to handle <xenl> is when
# you output the char in column 80, immediately output CR LF
# and then assume you are in column 1 of the next line. If <xenl>
# is on, am should be on too.
#
# I assume you have smooth scroll off or are at a slow enough baud
# rate that it doesn't matter (1200? or less). Also this assumes
# that you set auto-nl to "on", if you set it off use vt100-nam
# below.
#
# The padding requirements listed here are guesses. It is strongly
# recommended that xon/xoff be enabled, as this is assumed here.
#
# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
# tab settings are in non-volatile memory and don't need to be
# reset upon login. Also setting the number of columns glitches
# the screen annoyingly. You can type "reset" to get them set.
#
# The VT100 series terminals have cursor ("arrows") keys which can operate
# in two different modes: Cursor Mode and Application Mode.  Cursor Mode
# is the reset state, and is assumed to be the normal state.  Application
# Mode is the "set" state.  In Cursor Mode, the cursor keys transmit
# "Esc [ {code}" sequences, conforming to ANSI standards.  In Application
# Mode, the cursor keys transmit "Esc O <code>" sequences.  Application Mode
# was provided primarily as an aid to the porting of VT52 applications.  It is
# assumed that the cursor keys are normally in Cursor Mode, and expected that
# applications such as vi will always transmit the <smkx> string.  Therefore,
# the definitions for the cursor keys are made to match what the terminal
# transmits after the <smkx> string is transmitted.  If the <smkx> string
# is a null string or is not defined, then cursor keys are assumed to be in
# "Cursor Mode", and the cursor keys definitions should match that assumption,
# else the application may fail.  It is also expected that applications will
# always transmit the <rmkx> string to the terminal before they exit.
#
# The VT100 series terminals have an auxiliary keypad, commonly referred to as
# the "Numeric Keypad", because it is a cluster of numeric and function keys.
# The Numeric Keypad which can operate in two different modes: Numeric Mode and
# Application Mode.  Numeric Mode is the reset state, and is assumed to be
# the normal state.  Application Mode is the "set" state.  In Numeric Mode,
# the numeric and punctuation keys transmit ASCII 7-bit characters, and the
# Enter key transmits the same as the Return key (Note: the Return key
# can be configured to send either LF (\015) or CR LF).  In Application Mode,
# all the keypad keys transmit "Esc O {code}" sequences.  The PF1 - PF4 keys
# always send the same "Esc O {code}" sequences.  It is assumed that the keypad
# is normally in Numeric Mode.  If an application requires that the keypad be
# in Application Mode then it is expected that the user, or the application,
# will set the TERM environment variable to point to a terminfo entry which has
# defined the <smkx> string to include the codes that switch the keypad into
# Application Mode, and the terminfo entry will also define function key
# fields to match the Application Mode control codes.  If the <smkx> string
# is a null string or is not defined, then the keypad is assumed to be in
# Numeric Mode.  If the <smkx> string switches the keypad into Application
# Mode, it is expected that the <rmkx> string will contain the control codes
# necessary to reset the keypad to "Normal" mode, and it is also expected that
# applications which transmit the <smkx> string will also always transmit the
# <rmkx> string to the terminal before they exit.
#
# Here's a diagram of the VT100 keypad keys with their bindings.
# The top line is the name of the key (some DEC keyboards have the keys
# labelled somewhat differently, like GOLD instead of PF1, but this is
# the most "official" name).  The second line is the escape sequence it
# generates in Application Keypad mode (where "$" means the ESC
# character).  The third line contains two items, first the mapping of
# the key in terminfo, and then in termcap.
#   _______________________________________
#  |   PF1   |   PF2   |   PF3   |   PF4   |
#  |   $OP   |   $OQ   |   $OR   |   $OS   |
#  |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
#  |    7         8         9         -    |
#  |   $Ow   |   $Ox   |   $Oy   |   $Om   |
#  |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
#  |    4    |    5    |    6    |    ,    |
#  |   $Ot   |   $Ou   |   $Ov   |   $Ol   |
#  |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
#  |    1    |    2    |    3    |         |
#  |   $Oq   |   $Or   |   $Os   |  enter  |
#  |_ka1__K1_|_kb2__K2_|_ka3__K3_|  $OM    |
#  |         0         |   .     |         |
#  |        $Op        |  $On    |         |
#  |___kc1_______K4____|_kc3__K5_|_kent_@8_|
#
# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
# terminfo guidelines.  That is a compromise used to assign the remaining
# keys on the keypad to kf5-kf0, used on older systems with legacy termcap
# support:
vt100+keypad|dec vt100 numeric keypad no fkeys,
        ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
vt100+pfkeys|dec vt100 numeric keypad,
        kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
        use=vt100+keypad,
vt100+fnkeys|dec vt100 numeric keypad,
        kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
        kf9=\EOw, use=vt100+pfkeys,
#
# A better adaptation to modern keyboards such as the PC's, which have a dozen
# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
# use the 5-key arrangement to model the arrow keys as suggested in the
# terminfo guidelines:
#   _______________________________________
#  |   PF1   |   PF2   |   PF3   |   PF4   |
#  |   $OP   |   $OQ   |   $OR   |   $OS   |
#  |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
#  |    7         8         9         -    |
#  |   $Ow   |   $Ox   |   $Oy   |   $Om   |
#  |_ka1__K1_|_________|_ka3__K3_|_________|
#  |    4    |    5    |    6    |    ,    |
#  |   $Ot   |   $Ou   |   $Ov   |   $Ol   |
#  |_________|_kb2__K2_|_________|_________|
#  |    1    |    2    |    3    |         |
#  |   $Oq   |   $Or   |   $Os   |  enter  |
#  |_kc1__K4_|_________|_kc3__K5_|  $OM    |
#  |         0         |   .     |         |
#  |        $Op        |  $On    |         |
#  |___________________|_________|_kent_@8_|
#
vt220+keypad|dec vt220 numeric keypad,
        ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
        kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
        kb3=\EOv, kc2=\EOr,
#
vt100+enq|ncurses extension for vt100-style ENQ,
        u8=\E[?1;2c, use=ansi+enq,
vt102+enq|ncurses extension for vt102-style ENQ,
        u8=\E[?6c, use=ansi+enq,
#
# And here, for those of you with orphaned VT100s lacking documentation, is
# a description of the soft switches invoked when you do `Set Up'.
#
#  Scroll 0-Jump               Shifted 3   0-#
#  |      1-Smooth             |           1-British pound sign
#  | Autorepeat 0-Off          | Wrap Around 0-Off
#  | |          1-On           | |           1-On
#  | | Screen 0-Dark Bkg       | | New Line 0-Off
#  | | |      1-Light Bkg      | | |        1-On
#  | | | Cursor 0-Underline    | | | Interlace 0-Off
#  | | | |      1-Block        | | | |         1-On
#  | | | |                     | | | |
#  1 1 0 1       1 1 1 1       0 1 0 0       0 0 1 0       <--Standard Settings
#                | | | |                     | | | |
#                | | | Auto XON/XOFF 0-Off   | | | Power 0-60 Hz
#                | | |               1-On    | | |       1-50 Hz
#                | | ANSI/VT52 0-VT52        | | Bits Per Char. 0-7 Bits
#                | |           1-ANSI        | |                1-8 Bits
#                | Keyclick 0-Off            | Parity 0-Off
#                |          1-On             |        1-On
#                Margin Bell 0-Off           Parity Sense 0-Odd
#                            1-On                         1-Even
#
# The following SET-UP modes are assumed for normal operation:
#       ANSI_MODE       AUTO_XON/XOFF_ON        NEWLINE_OFF     80_COLUMNS
#       WRAP_AROUND_ON  JUMP_SCROLL_OFF
# Other SET-UP modes may be set for operator convenience or communication
# requirements; I recommend
#       AUTOREPEAT_ON   BLOCK_CURSOR    MARGIN_BELL_OFF    SHIFTED_3_#
# Unless you have a graphics add-on such as Digital Engineering's VT640
# (and even then, whenever it can be arranged!) you should set
#       INTERLACE_OFF
#
# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
vt100|vt100-am|dec vt100 (w/advanced video),
        OTbs, mc5i, xenl, xon,
        vt#3,
        csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
        kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
        mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
        rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
        sc=\E7,
        sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
            %;m%?%p9%t\016%e\017%;$<2>,
        smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
        use=vt100+4bsd, use=vt100+fnkeys,
vt100+4bsd|dec vt100 from 4.0BSD,
        am, msgr,
        cols#80, it#8, lines#24,
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
        clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
        cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
        cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
        cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
        enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
        rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
        rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
        sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
            %;m%?%p9%t\016%e\017%;$<2>,
        sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
        smul=\E[4m$<2>, tbc=\E[3g,
vt100nam|vt100-nam|vt100 no automargins,
        am@, xenl@,
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
vt100-vb|dec vt100 (w/advanced video) & no beep,
        bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,

# Ordinary vt100 in 132 column ("wide") mode.
vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
        cols#132, lines#24,
        rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
        cols#132, lines#14, vt@,
        rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,

# vt100 with no advanced video.
vt100-nav|vt100 without advanced video option,
        xmc#1,
        blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
        smul@, use=vt100,
vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
        cols#132, lines#14, use=vt100-nav,

# vt100 with one of the 24 lines used as a status line.
# We put the status line on the top.
vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
        eslok, hs,
        lines#23,
        clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
        cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
        fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
        tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,

# Status line at bottom.
# Clearing the screen will clobber status line.
vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
        eslok, hs,
        lines#23,
        dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
        tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,

# Most of the `vt100' emulators out there actually emulate a vt102
# This entry (or vt102-nsgr) is probably the right thing to use for
# these.
vt102|dec vt102,
        dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
        use=vt100,
vt102-w|dec vt102 in wide mode,
        cols#132,
        rs3=\E[?3h, use=vt102,

# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
# fail to interpret the ^O and ^N escapes properly.  Symptom: the <sgr0>
# string in the canonical vt100 entry above leaves the screen littered
# with little  snowflake or star characters (IBM PC ROM character \017 = ^O)
# after highlight turnoffs.  This entry should fix that, and even leave
# ACS support working, at the cost of making multiple-highlight changes
# slightly more expensive.
# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
        sgr@, sgr0=\E[m, use=vt102,

# VT125 Graphics CRT.  Clear screen also erases graphics
# Some vt125's came configured with vt102 support.
vt125|vt125 graphics terminal,
        mir,
        clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,

# This isn't a DEC entry, it came from University of Wisconsin.
# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
vt131|dec vt131,
        OTbs, am, xenl,
        cols#80, it#8, lines#24, vt#3,
        bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
        clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
        cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
        cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
        ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
        is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
        kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
        kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
        rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
        rmul=\E[m$<2/>,
        rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
        sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
        smso=\E[7m$<2/>, smul=\E[4m$<2/>,

# vt132 - like vt100 but slower and has ins/del line and such.
# I'm told that <smir>/<rmir> are backwards in the terminal from the
# manual and from the ANSI standard, this describes the actual
# terminal. I've never actually used a vt132 myself, so this
# is untested.
#
vt132|DEC vt132,
        xenl,
        dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
        ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,

# This vt220 description maps F5--F9 to the second block of function keys
# at the top of the keyboard.  The "DO" key is used as F10 to avoid conflict
# with the key marked (ESC) on the vt220.  See vt220d for an alternate mapping.
# PF1--PF4 are used as F1--F4.
#
# added msgr -TD
vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
        OTbs, OTpt, am, mir, msgr, xenl, xon,
        cols#80, lines#24, vt#3,
        OTnl=\n,
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
        clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
        csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
        dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
        if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
        is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
        kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
        kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
        kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
        khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
        rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
        ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
        rmso=\E[27m, rmul=\E[24m,
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
            %p9%t\E(0%e\E(B%;$<2>,
        sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
        smso=\E[7m, smul=\E[4m,

# A much better description of the VT200/220; used to be vt220-8
# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
# designation to accommodate bug in pcvt -TD
#
# Here's a picture of the VT220 editing keypad:
#       +--------+--------+--------+
#       | Find   | Insert | Remove |
#       +--------+--------+--------+
#       | Select | Prev   | Next   |
#       +--------+--------+--------+
vt220|vt200|dec vt220,
        OTbs, am, mir, msgr, xenl, xon,
        cols#80, it#8, lines#24, vt#3,
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
        cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
        ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
        flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
        ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
        il=\E[%p1%dL, il1=\E[L, ind=\ED,
        is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
        kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
        kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
        kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
        kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
        kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
        khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
        krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
        nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
        rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
        rs1=\E[?3l, sc=\E7,
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
            %p9%t\E(0%e\E(B%;$<2>,
        sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
        smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
        use=ansi+enq,
vt220-w|vt200-w|DEC vt220 in wide mode,
        cols#132,
        rs3=\E[?3h, use=vt220,
vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
        OTbs, am, mc5i, mir, msgr, xenl, xon,
        cols#80, it#8, lines#24, vt#3,
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
        csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
        cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
        cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
        dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
        ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
        flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
        ich=\233%p1%d@, if=/usr/share/tabset/vt100,
        il=\233%p1%dL, il1=\233L, ind=\ED,
        is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
        kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
        kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
        kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
        kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
        kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
        kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
        kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
        kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
        mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
        rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
        rmul=\23324m, rs1=\233?3l, sc=\E7,
        sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
            %?%p9%t\E(0%e\E(B%;$<2>,
        sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
        smso=\2337m, smul=\2334m, tbc=\2333g,

# vt220d:
# This vt220 description regards F6--F10 as the second block of function keys
# at the top of the keyboard.  This mapping follows the description given
# in the VT220 Programmer Reference Manual and agrees with the labeling
# on some terminals that emulate the vt220.  There is no support for an F5.
# See vt220 for an alternate mapping.
#
vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
        kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
        kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
        kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
        kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,

vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
        am@,
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,

# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
# (not an official DEC entry!)
# The problem with real vt220 terminals is they don't send escapes when in
# in vt220 mode.  This can be gotten around two ways.  1> don't send
# escapes or 2> put the vt220 into vt100 mode and use all the nifty
# features of vt100 advanced video which it then has.
#
# This entry takes the view of putting a vt220 into vt100 mode so
# you can use the escape key in emacs and everything else which needs it.
#
# You probably don't want to use this on a VMS machine since VMS will think
# it has a vt220 and will get fouled up coming out of emacs
#
# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
# added msgr -TD
vt200-js|vt220-js|dec vt200 series with jump scroll,
        am, msgr,
        cols#80,
        bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
        cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
        cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
        ht=^I, il1=\E[L, ind=\ED,
        is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
            ?25h\E>\E[m,
        kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
        kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
        rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
        rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
        rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
        smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,

# This was DEC's vt320.  Use the purpose-built one below instead
#vt320|DEC VT320 in vt100 emulation mode,
#       use=vt220,

# Use v320n for SCO's LYRIX.  Otherwise, use Adam Thompson's vt320-nam.
#
vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
        am@,
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,

# These entries are not DEC's official ones, they were purpose-built for the
# VT320.  Here are the designer's notes:
# <kel> is end on a PC kbd.  Actually 'select' on a VT.  Mapped to
# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
# khome is Home on a PC kbd.  Actually 'FIND' on a VT.
# Things that use <knxt> usually use tab anyways... and things that don't use
# tab usually use <knxt> instead...
# kprv is same as tab - Backtab is useless...
# I left out <sgr> because of its RIDICULOUS complexity,
# and the resulting fact that it causes the termcap translation of the entry
# to SMASH the 1k-barrier...
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
# (vt320: uncommented <fsl> --esr)
vt320|vt300|dec vt320 7 bit terminal,
        am, hs, mir, msgr, xenl,
        cols#80, lines#24, wsl#80,
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
        clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
        cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
        ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
        hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
        is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
        kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
        kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
        kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
        kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
        kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
        kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
        kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
        rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
        rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
        rmul=\E[m,
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
        sc=\E7,
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
            %p9%t\E(0%e\E(B%;$<2>,
        sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
        smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
        use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
        am@,
        is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
# We have to init 132-col mode, not 80-col mode.
vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
        cols#132, wsl#132,
        is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
        rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
        am@,
        is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
        rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,

# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
#   which are pretty much a superset of the VT320.  They have the
#   host writable status line, yet another different DRCS matrix size,
#   and such, but they add the DEC Technical character set, Multiple text
#   pages, selectable length pages, and the like.  The difference between
#   the vt330 and vt340 is that the latter has only 2 planes and a monochrome
#   monitor, the former has 4 planes and a color monitor.  These terminals
#   support VT131 and ANSI block mode, but as with much of these things,
#   termcap/terminfo doesn't deal with these features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode.  This changes the definitions of the
# arrow keys.  Emacs v19 is smarter and mines its keys directly out of
# your termcap or terminfo entry,
#
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt340: string capability "sb=\E[M" corrected to "sr";
# also, added <rmam>/<smam> based on the init string -- esr)
vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
        am, eslok, hs, mir, msgr, xenl, xon,
        cols#80, it#8, lines#24, vt#3,
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
        cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
        cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
        cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
        dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
        ed=\E[J, el=\E[K, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
        home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
        il1=\E[L, ind=\ED,
        is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
            \E[24;1H,
        kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
        kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
        kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
        lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
        rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
        rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
        rmul=\E[24m, rs1=\E[?3l, sc=\E7,
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
            %p9%t\E(0%e\E(B%;$<2>,
        sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
        smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
        tsl=\E[2$~\E[1$}\E[1;%dH,

# Left/right margins are supported in xterm since patch #279 (2012/05/10)
vt420+lrmm|VT420 left/right margins,
        mgc=\E[?69l, smglr=\E[?69h\E[%i%p1%d;%p2%ds,

# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
# (originally written with vt420 as its primary name, and usable for it).
#
# VT400/420 -- This terminal is a superset of the vt320.  It adds the multiple
#    text pages and long text pages with selectable length of the vt340, along
#    with left and right margins, rectangular area text copy, fill, and erase
#    operations, selected region character attribute change operations,
#    page memory and rectangle checksums, insert/delete column, reception
#    macros, and other features too numerous to remember right now.  TERMCAP
#    can only take advantage of a few of these added features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode.  This changes the definitions of the
# arrow keys.  Emacs v19 is smarter and mines its keys directly out of
# your termcap entry,
#
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
# also, added <rmam>/<smam> based on the init string -- esr)
vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
        am, eslok, hs, mir, msgr, xenl, xon,
        cols#80, it#8, lines#24, vt#3,
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        blink=\E[5m, bold=\E[1m, civis=\E[?25l,
        clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=\r,
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
        cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
        dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
        el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
        home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
        il=\E[%p1%dL, il1=\E[L, ind=\ED,
        is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
            \E[24;1H,
        kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
        kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
        kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
        lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
        rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
        rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
        rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
            %p9%t\E(0%e\E(B%;$<2>,
        sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
        smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
        tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,

# (vt420: I removed <kf0>, it collided with <kf10>.  I also restored
# a missing <sc> -- esr)
# add msgr and other capabilities from vt220 -TD
vt420|DEC VT420,
        am, mir, msgr, xenl, xon,
        cols#80, it#8, lines#24, vt#3,
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
        clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
        cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
        ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
        enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
        hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
        il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
        is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
        kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
        kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
        kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
        kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
        rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
        ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
        rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
        rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
            %p9%t\E(0%e\E(B%;$<2>,
        sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
        smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
        use=ansi+pp, use=dec+sl, use=ansi+enq,

# DEC VT220 and up support DECUDK (user-defined keys).  DECUDK (i.e., pfx)
# takes two parameters, the key and the string.  Translating the key is
# straightforward (keys 1-5 are not defined on real terminals, though some
# emulators define these):
#
#               if (key < 16) then  value = key;
#               else if (key < 21) then value = key + 1;
#               else if (key < 25) then value = key + 2;
#               else if (key < 27) then value = key + 3;
#               else if (key < 30) then value = key + 4;
#               else value = key + 5;
#
# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
# There's no provision in terminfo for emitting a string in this format, so the
# application has to know it.
#
vt420pc|DEC VT420 w/PC keyboard,
        kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
        kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
        kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
        kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
        kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
        kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
        kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
        kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
        kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
        kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
        kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
        kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
        kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
        pctrm=USR_TERM\:vt420pcdos\:,
        pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
            %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
            %d/%p2%s\E\\,
        use=vt420,

vt420pcdos|DEC VT420 w/PC for DOS Merge,
        lines#25,
        dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
              %{127}%=%t\E\177%e%p1%c%;,
        pctrm@,
        rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
        sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,

vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
        kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
        kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
        kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
        kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
        kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
        khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
        use=vt420,

vt510|DEC VT510,
        use=vt420,
vt510pc|DEC VT510 w/PC keyboard,
        use=vt420pc,
vt510pcdos|DEC VT510 w/PC for DOS Merge,
        use=vt420pcdos,

# VT520/VT525
#
# The VT520 is a monochrome text terminal capable of managing up to
# four independent sessions in the terminal.  It has multiple ANSI
# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
# 925 910+, ADDS A2).  This terminfo data is for the ANSI emulations only.
#
# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
# [Alt]/[Print Screen] depending upon which keyboard and which
# terminal mode is being used.  If Set-Up has been disabled or
# assigned to an unknown key, Set-Up may be entered by pressing
# [F3] as the first key after power up, regardless of keyboard type.
vt520|DEC VT520,
        use=ansi+rca, use=vt420, use=ansi+tabs,

vt525|DEC VT525,
        use=vt520,

# I just got a brand new Boundless VT520 with that company's "ANSI 2011"
# Keyboard, which replaces the old LK41R-AA keyboard.
#
# In trying to get the function keys to work, I had to cobble my own
# terminfo.src entry, since the existing vt520 entry doesn't include most of
# the function keys.  If I blend the entries for "vt420f" and "vt220+keypad"
# I seem to get them all -Mike Gran
vt520ansi|Boundless VT520 ANSI,
        use=ansi+rca, use=vt420f, use=vt220+keypad,
        use=ansi+tabs,

#### VT100 emulations

# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
# to telnetd.   Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
# that this works best with a stock vt100 entry.
dec-vt100|EWAN telnet's vt100 emulation,
        use=vt100,

# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
dec-vt220|DOS tnvt200 terminal emulator,
        am@, use=vt220,

# Zstem340 is an (IMHO) excellent VT emulator for PC's.  I recommend it to
# anyone who needs PC VT340 emulation. (or anything below that level, for
# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
# RDBM systems, it includes ReGIS and SiXel support!  I'm impressed...
# I can send the address if requested.
# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
z340|zstem vt340 terminal emulator 132col 42line,
        lines#42,
        is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
        rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
        am@,
        is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
        rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,

# expect-5.44.1.15/example/tkterm
# a minimal subset of a vt100 (compare with "news-unk).
#
# The missing "=" in smkx is not a typo (here), but an error in tkterm.
tt|tkterm|Don Libes' tk text widget terminal emulator,
        clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
        cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
        kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
        kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
        smso=\E[7m,

######## APPLE

#### Terminal.app

# nsterm*|Apple_Terminal - AppKit Terminal.app
#
# Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
# Server and Mac OS X operating systems. There is also a
# "terminal.app" in GNUstep, but I believe it to be an unrelated
# codebase and I have not attempted to describe it here.
#
# For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
# are pretty much on your own. Use "nsterm-7-m" and hope for the best.
# You might also try "nsterm-7" and "nsterm-old" if you suspect your
# version supports color.
#
# To determine the version of Terminal.app you're using by running:
#
#     echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
#
# For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
#
# For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
#
# For Apple_Terminal v71+/v100+, use "nsterm-bce".
#
# For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
#
# For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
#
# For all earlier versions (Apple_Terminal), try "nsterm-7-m"
# (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
# might work too, but really you're on your own here since these
# systems are very obsolete and I can't test them. I do welcome
# patches, though :).

# Other Terminals:
#
# For GNUstep_Terminal, you're probably best off using "linux" or
# writing your own terminfo.

# For MacTelnet, you're on your own. It's a different codebase, and
# seems to be somewhere between "vt102", "ncsa" and "xterm-color".

# For iTerm.app, see "iterm".

#
# The AppKit Terminal.app descriptions all have names beginning with
# "nsterm". Note that the statusline (-s) versions use the window
# titlebar as a phony status line, and may produce warnings during
# compilation as a result ("tsl uses 0 parameters, expected 1".)
# Ignore these warnings, or even ignore these entries entirely. Apps
# which need to position the cursor or do other fancy stuff inside the
# status line won't work with these entries. They're primarily useful
# for programs like Pine which provide simple notifications in the
# status line. Please note that non-ASCII characters don't work right
# in the status line, since Terminal.app incorrectly interprets their
# Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
# versions) or only accepts status lines consisting entirely of
# characters from the first 256 Unicode positions (including C1 but
# not C0 or DEL.)
#
# The Mythology* of AppKit Terminal.app:
#
# In the days of NeXTSTEP 0.x and 1.x there were two incompatible
# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
# shareware replacement for Terminal called "Stuart" which NeXT bought
# and used as the basis for the Terminal.app in NeXTSTEP 2+,
# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
# capabilities for the early versions, but I believe that the
# TERM_PROGRAM_VERSION may have been reset at some point.
#
# The early versions were tailored to the NeXT character set. Sometime
# after the Apple acquisition the encoding was switched to MacRoman
# (initially with serious altcharset bugs due to incomplete conversion
# of the old NeXT code,) and then later to UTF-8. Also sometime during
# or just prior to the early days of Mac OS X, the Terminal grew ANSI
# 8-color support (initially buggy when combined with attributes, but
# that was later fixed.) More recently, around Mac OS X version 10.3
# or so (Terminal.app v100+) xterm-like 16-color support was added. In
# some versions (for instance 133-1 which shipped with Mac OS X
# version 10.4) this suffered from the <bce> bug, but that seems to
# have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
#
# In the early days of Mac OS X the terminal was fairly buggy and
# would routinely crash under load. Many of these bugs seem to have
# been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
# some may still remain. This change seems to correspond to
# Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
# it did previously.
#
# * This may correspond with what actually happened, but I don't
#   know. It is based on guesswork, hearsay, private correspondence,
#   my faulty memory, and the following online sources and references:
#
# [1] "Three Scotts and a Duane" by Simson L. Garfinkel
# http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
#
# [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
# https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
#
# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
#   "nsterm" to comply with the name length and case conventions and
#   limitations of various software packages [notably Solaris terminfo
#   and UNIX.] A single Apple_Terminal alias is retained for
#   backwards-compatibility.
#
# * Added function key support (F1-F4). These only work in Terminal.app
#   version 51, hopefully the capabilities won't cause problems for people
#   using version 41.
#
# * Added "full color" (-c) entries which support the 16-color mode in
#   version 51.
#
# * By default, version 51 uses UTF-8 encoding with broken altcharset
#   support, so "ASCII" (-7) entries without altcharset support were
#   added.

# nsterm - AppKit Terminal.app
#
# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
# Terminal.app. It is a partial VT100 emulation with some xterm-like
# extensions. This terminfo was written to describe versions 41
# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
# version 10.1) of Terminal.app.
#
# Terminal.app runs under the Mac OS X Quartz windowing system (and
# other AppKit-supported windowing systems.)  On the Mac OS X machine I
# use, the executable for Terminal.app is:
# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
#
# If you're looking for a description of the full-screen system
# console which runs under Apple's Darwin operating system on PowerPC
# platforms, see the "xnuppc" entry instead.
#
# There were no function keys in version 41. In version 51, there are
# four working function keys (F1, F2, F3 and F4.) The function keys
# are included in all of these entries.
#
# It does not support mouse pointer position reporting. Under some
# circumstances the cursor can be positioned using option-click; this
# works by comparing the cursor position and the selected position,
# and simulating enough cursor-key presses to move the cursor to the
# selected position. This technique fails in all but the simplest
# applications.
#
# It provides partial ANSI color support (background colors interacted
# badly with bold in version 41, though, as reflected in :ncv:.) The
# monochrome (-m) entries are useful if you've disabled color support
# or use a monochrome monitor. The full color (-c) entries are useful
# in version 51, which doesn't exhibit the background color bug. They
# also enable an xterm-compatible 16-color mode.
#
# The configurable titlebar is set using xterm-compatible sequences;
# it is used as a status bar in the statusline (-s) entries. Its width
# depends on font sizes and window sizes, but 50 characters seems to
# be the default for an 80x24 window.
#
# The MacRoman character encoding is used for some of the alternate
# characters in the "MacRoman" entries; the "ASCII" (-7) entries
# disable alternate character set support entirely, and the "VT100"
# (-acs) entries rely instead on Terminal.app's own buggy VT100
# graphics emulation, which seems to think the character encoding is
# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
# are useful in Terminal.app version 51, which supports UTF-8 and
# other ASCII-compatible character encodings but does not correctly
# implement VT100 graphics; once VT100 graphics are correctly
# implemented in Terminal.app, the "VT100" (-acs) entries should be
# usable in any ASCII-compatible character encoding [except perhaps
# in UTF-8, where some experts argue for disallowing alternate
# characters entirely.]
#
# Terminal.app reports "vt100" as the terminal type, but exports
# several environment variables which may aid detection in a shell
# profile (i.e. .profile or .login):
#
# TERM=vt100
# TERM_PROGRAM=Apple_Terminal
# TERM_PROGRAM_VERSION=41      # in Terminal.app version 41
# TERM_PROGRAM_VERSION=51      # in Terminal.app version 51
#
# For example, the following Bourne shell script would detect the
# correct terminal type:
#
# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
# then
#     export TERM
#     if [ :"$TERM_PROGRAM_VERSION" = :41 ]
#     then
#         TERM="nsterm-old"
#     else
#         TERM="nsterm-c-7"
#     fi
# fi
#
# In a C shell derivative, this would be accomplished by:
#
# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
#     if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
#          if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
#              setenv TERM "nsterm-old"
#          else
#              setenv TERM "nsterm-c-7"
#          endif
#     endif
# endif

# The '+' entries are building blocks
nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
        am, bw, msgr, xenl, xon,
        cols#80, it#8, lines#24,
        bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
        cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
        dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
        el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
        ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
        kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
        rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
            %p5%t;2%;%?%p7%t;8%;m,
        sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
        smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,

nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        enacs=\E(B\E)0, rmacs=^O,
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
            %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
        sgr0=\E[m\017, smacs=^N, use=nsterm+7,

nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
        acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i
             \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
             \271|\255}\243~\245,
        enacs=\E(B\E)0, rmacs=^O,
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
            %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
        sgr0=\E[m\017, smacs=^N, use=nsterm+7,

# compare with xterm+sl-twm
nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
        wsl#50, use=xterm+sl-twm,

nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
        op=\E[0m, use=ibm+16color,

nsterm+c41|AppKit Terminal.app v41 color support,
        colors#8, ncv#37, pairs#64,
        op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,

# These are different combinations of the building blocks

# ASCII charset (-7)
nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
        use=nsterm+7,

nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
        use=nsterm+s, use=nsterm+7,

nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
        use=nsterm+c41, use=nsterm+7,

nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
        use=nsterm+c, use=nsterm+7,

nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
        use=nsterm+s, use=nsterm+c41, use=nsterm+7,

nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
        use=nsterm+s, use=nsterm+c, use=nsterm+7,

# VT100 alternate-charset (-acs)
nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
        use=nsterm+acs,

nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
        use=nsterm+s, use=nsterm+acs,

nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
        use=nsterm+c41, use=nsterm+acs,

nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
        use=nsterm+c, use=nsterm+acs,

nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
        use=nsterm+s, use=nsterm+c41, use=nsterm+acs,

nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
        use=nsterm+s, use=nsterm+c, use=nsterm+acs,

# MacRoman charset
nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
        use=nsterm+mac,

nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
        use=nsterm+s, use=nsterm+mac,

nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
        use=nsterm+c41, use=nsterm+mac,

nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
        use=nsterm+c, use=nsterm+mac,

nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
        use=nsterm+s, use=nsterm+c41, use=nsterm+mac,

nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
        use=nsterm+s, use=nsterm+c, use=nsterm+mac,

# In Mac OS X version 10.5 the format of the preferences has changed
# and a new, more complex technique is needed, e.g.,
#
#       python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
#       "NSUserDefaults");ud=NSUserDefaults.alloc();
#       ud.init();prefs=ud.persistentDomainForName_(
#       "com.apple.Terminal");prefs["Window Settings"][
#       prefs["Default Window Settings"]]["TerminalType"
#       ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
#       "com.apple.Terminal")' nsterm-16color
#
# and it is still not settable from the preferences dialog. This is
# tracked under rdar://problem/7365108 and rdar://problem/7365134
# in Apple's bug reporter.
#
# In OS X 10.5 (Leopard) the TERM which can be set in the preferences dialog
# defaults to xterm-color.  Alternative selections are ansi, dtterm, rxvt,
# vt52, vt100, vt102 and xterm.
nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
        bw@, mir, npc,
        civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
        flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
        ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
        kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
        kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
        kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
        kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
        knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
        smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
        kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,

# The versions of Terminal.app in Mac OS X version 10.3.x seem to have
# the background color erase feature. The newer version 240.2 in Mac OS X
# version 10.5 does not.
#
# This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
# and D P Schreber comparing to nsterm-c-s-acs.
#
# In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
# can be set in Terminal.app, e.g.,
#
#       defaults write com.apple.Terminal TermCapString nsterm-bce
#
# and that it is not set in Terminal's preferences dialog.
#
# Modified for OS X 10.8, omitting bw based on testing with tack -TD
#
# Notes:
# * The terminal description matches the default settings.
# * The keyboard is configurable via a dialog.
# * By default khome, kend, knext and kprev are honored only with a
#   shift-modifier.
# * There are bindings for control left/right arrow (but not up/down).
#   Added those to nsterm-16color, which is the version used for OS X 10.6
# * "Allow VT100 application keypage mode" is by default disabled.
#   There is no way to press keypad-comma unless application mode is enabled
#   and used.
# * 132-column mode stopped working during vttest's tests.  Consider it broken.
# * CHT, REP, SU, SD are buggy.
# * ECH works (also in Leopard), but is not used here for compatibility.
# * The terminal preferences dialog replaces xterm-color by xterm-16color and
#   xterm-256color.  However, it adds "nsterm", so it is possible to use the
#   nsterm entry from this file to override the MacPorts (20110404) or
#   system (20081102) copy of this file.
# + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
#   dialog defaults to xterm-256color.  Alternative selections are ansi,
#   dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color.  However,
#   the menu says "Declare terminal as" without promising to actually emulate
#   the corresponding terminals.  Indeed, changing TERM does not affect the
#   emulation itself.  This means that
#   + the function-keys do not match for dtterm for kf1-kf4 as well as
#     khome/kend
#   + the color model is the same for each setting of TERM (does not match
#     ansi or dtterm).
#   + the shift/control/meta key modifiers from rxvt and xterm variants are not
#     recognised except for a few special cases, i.e., kRIT5 and kLFT5.
#   + the vt52 emulation does not give a usable shell because screen-clearing
#     does not work as expected.
#   + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
# + OSX 10.9 (Yosemite) added more extended keys in the default configuration
#   as well as unmasking F10 (which had been used in the window manager). Those
#   keys are listed in this entry.
nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
        bce, use=nsterm-16color,

# This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
#       TERM_PROGRAM_VERSION=309
# Earlier reports state that these differences also apply to OS X 10.7 (Lion),
#       TERM_PROGRAM_VERSION=303
nsterm-build309|Terminal.app in OS X 10.8,
        use=xterm+256setaf, use=nsterm-bce,

# removed bogus kDC7 -TD
nsterm-build326|Terminal.app in OS X 10.9,
        kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
        kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
        kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-build309,

# actually "343.7"
nsterm-build343|Terminal.app in OS X 10.10,
        kend=\EOF, khome=\EOH, use=nsterm-build326,

# reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
# Using vttest:
# + no vt52 mode for cursor keys, though vt52 screen works in vttest
# + f1-f4 map to pf1-pf4
# + no vt220 support aside from DECTCEM and ECH
# + there are no protected areas.  Forget about anything above vt220.
# + in ECMA-48 cursor movement, VPR and HPR fail.  Others work.
# + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
# + but bce fails for 11.6.7.2 (test repeat).
# + SD (11.6.7.3) also fails, but SL/SR/SU work.
# + 11.6.6 (test insert/delete char/line with bce) has several failures.
# + normal (not X10 or Highlight tracking) mouse now works.
# + mouse any-event works
# + mouse button-event works
# + in alternate screen:
#   mode 47/48 work
#   mode 1047 fails to restore cursor position (do not use)
#   mode 1049 fails to restore screen contents (do not use)
# + dtterm window-modify operations work (some messages are not printed)
# + dtterm window-report gives size of window in characters/pixels as
#   well as state of window.
# Using tack:
# + there is no difference between cnorm/cvvis
# + has dim/invis/blink (no protect of course)
# + most function keys with shift/control modifiers give beep
#   (user can configure, but out-of-the-box is what I record)
# + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
#   F8 and F9).
# + kLFT5/kRIT5 work, but not up/down with control-modifier
# + kLFT/kRIT work, but not up/down with shift-modifier
# + there are a few predefined bindings with Alt, but no clear pattern.
# + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
# Using ncurses test-program with xterm-new:
# + no italics
# Using xterm's scripts:
# + palette for 256-colors is hardcoded.
# + no support for "dynamic colors"
# + no support for tcap-query.
nsterm-build361|Terminal.app in OS X 10.11,
        XT,
        kmous=\E[M, use=nsterm-build343,

# reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
# Comparing with build361, little has changed, except that italics work.
# Direct-color is not supported, by the way.
#
# Improved rmso/rmul -TD
nsterm-build400|Terminal.app in OS X 10.13,
        rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
        use=ecma+italics, use=nsterm-build361,

# This is an alias which should always point to the "current" version
nsterm|nsterm-256color|Apple_Terminal|AppKit Terminal.app,
        use=nsterm-build400,

#### iTerm, iTerm2

# iTerm 0.10
#
# iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more
# featureful) terminal emulator for Mac OS X.  It is similar enough in
# capabilities to nsterm-16color that I have derived this description from that
# one, but as far as I know they share no code.  Many of the features are
# user-configurable, but I attempt only to describe the default configuration
# (B. Sittler).
#
# According to its documentation, iTerm uses terminfo to obtain function key
# definitions.  For example, if it is started with TERM=xterm, it uses key
# definitions from that terminal description from the local OSX machine.  Those
# $TERM settings may be augmented using the bookmark and profile dialogs.
# However, the behavior seen with tack does not agree with either the terminfo
# description or the function keys in its "xterm" profile.
#
# NOTES:
# with vttest:
#       reports primary DA as VT100 with AVO: \E[?1;2c
#       reports secondary DA as "\E[>0;95;c"
#       supports blink and underline
#       displays bold text as red
#       recognizes all dtterm controls for modifying/querying window
#       resizing via escape sequence is very slow
#       supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking)
#       supports X11R5 alternate screen and XFree86 1049 (no 1047/1048)
#       supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA
# with tack:
#       .
# with ncurses test-program:
#       ncurses 'k' has problem in second screen; light background does not fill
# with xterm scripts
#       can display/alter xterm-256color cube
#       can display/alter xterm-88color cube
iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
        am, bce, hs, mir, msgr, npc, xenl, xon,
        cols#80, it#8, lines#24, wsl#50,
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
        clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
        cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
        el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
        flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
        ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
        il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?,
        kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
        kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
        kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
        kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
        khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8,
        rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
        rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
        rmso=\E[m, rmul=\E[m,
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
            %p9%t\016%e\017%;,
        sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
        smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
        tbc=\E[3g, vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
        use=ansi+enq, use=xterm+sl-twm, use=vt100+keypad,
        use=xterm+x11mouse, use=xterm+256setaf,

# iTerm2 3.0.15