1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2018/02/24 14:23:54 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=\r, cud1=\n, ind=\n,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
314 kcud1=\n, nel=\r\n, .kbs=^H,
318 bel=^G, cr=\r, cud1=\n, ind=\n,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=\n, bel=^G, cud1=\n,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
337 ansi+local1|ANSI normal-mode cursor-keys,
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
339 ansi+local|ANSI normal-mode parameterized cursor-keys,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
342 ansi+tabs|ANSI tab-stops,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
344 ansi+inittabs|ANSI initial tab-stops,
346 ansi+erase|ANSI clear screen/line,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
348 ansi+rca|ANSI relative cursor-addressing,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
350 ansi+cup|ANSI absolute cursor-addressing,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
352 ansi+rep|ANSI repeat-character,
353 rep=%p1%c\E[%p2%{1}%-%db,
354 ansi+idl1|ANSI insert/delete one line,
356 ansi+idl|ANSI insert/delete lines,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
358 ansi+idc1|ANSI insert/delete one character,
359 dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
360 ansi+idc|ANSI insert/delete characters,
361 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
362 ansi+arrows|ANSI normal-mode cursor-keys,
363 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
365 ansi+sgr|ANSI graphic renditions,
366 blink=\E[5m, invis=\E[8m, rev=\E[7m,
367 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
369 ansi+sgrso|ANSI standout only,
370 rmso=\E[m, smso=\E[7m,
371 ansi+sgrul|ANSI underline only,
372 rmul=\E[m, smul=\E[4m,
373 ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
375 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
377 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
378 ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
380 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
382 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
383 ansi+csr|ANSI scroll-region plus cursor save & restore,
384 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
386 # The normal (ANSI) flavor of "media copy" building block asserts that
387 # characters sent to the printer do not echo on the screen. DEC terminals
388 # can also be put into autoprinter mode, where each line is sent to the
389 # printer as you move off that line, e.g., by a carriage return.
390 ansi+pp|ANSI printer port,
392 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
393 dec+pp|DEC autoprinter mode,
394 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
396 # The IBM PC alternate character set. Plug this into any Intel console entry.
397 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
398 # ROM graphics for control characters such as the diamond, up- and down-arrow.
399 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
400 # will work with any Intel console, they all seem to have inherited \E[11m
401 # from the ANSI.SYS de-facto standard.
402 klone+acs|alternate character set for ansi.sys displays,
403 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
404 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
405 \301w\302x\263y\363z\362{\343|\330}\234~\376,
406 rmacs=\E[10m, smacs=\E[11m,
408 # Highlight controls corresponding to the ANSI.SYS standard. Most
409 # console drivers for Intel boxes obey these. Makes the same assumption
410 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
411 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
412 klone+sgr|attribute control for ansi.sys displays,
413 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
414 rmso=\E[m, rmul=\E[m,
415 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
417 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
420 # Most Intel boxes do not treat "invis" (invisible) text.
421 klone+sgr8|attribute control for ansi.sys displays,
423 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
424 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
427 # Highlight controls corresponding to the ANSI.SYS standard. *All*
428 # console drivers for Intel boxes obey these. Does not assume \E[11m will
429 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
430 # diamond and arrow characters under curses.
431 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
432 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
434 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
435 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
436 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
439 # KOI8-R (RFC1489) acs (alternate character set)
440 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
441 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
442 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
443 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
444 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
446 rmacs=\E[10m, smacs=\E[11m,
448 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
449 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
450 # but equivalent strings that don't rely on that coincidence:
451 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
452 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
453 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
454 # They match a subset of ECMA-48.
455 klone+color|color control for ansi.sys and ISO6429-compatible displays,
456 colors#8, ncv#3, pairs#64,
457 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
459 # This is better than klone+color, it doesn't assume white-on-black as the
460 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
461 ecma+color|color control for ECMA-48-compatible terminals,
463 colors#8, ncv#3, pairs#64,
464 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
466 ecma+italics|ECMA-48 italics,
467 ritm=\E[23m, sitm=\E[3m,
469 # Attribute control for ECMA-48-compatible terminals
470 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
471 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
473 ecma+strikeout|ECMA-48 strikeout/crossed-out,
474 rmxx=\E[29m, smxx=\E[9m,
476 # For comparison, here are all the capabilities implied by the Intel
477 # Binary Compatibility Standard (level 2) that fit within terminfo.
478 # For more detail on this rather pathetic standard, see the comments
479 # near the end of this file.
480 ibcs2|Intel Binary Compatibility Standard prescriptions,
481 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
482 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
483 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
484 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
485 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
486 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
487 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
490 #### ANSI/ECMA-48 terminals and terminal emulators
492 # See near the end of this file for details on ANSI conformance.
493 # Don't mess with these entries! Lots of other entries depend on them!
495 # This section lists entries in a least-capable to most-capable order.
496 # if you're in doubt about what `ANSI' matches yours, try them in that
497 # order and back off from the first that breaks.
499 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
500 # and more than one page of memory. It uses local motions instead of
501 # direct cursor addressing, and makes almost no assumptions. It does
502 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
503 ansi-mr|mem rel cup ansi,
505 cols#80, lines#24, use=vanilla, use=ansi+erase,
508 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
509 # beware of screen size problems and memory relative cursor addressing.
510 ansi-mini|any ansi terminal with pessimistic assumptions,
512 cols#80, lines#24, use=vanilla, use=ansi+cup,
515 # ansi-mtabs adds relative addressing and minimal tab support
516 ansi-mtabs|any ansi terminal with pessimistic assumptions,
518 ht=^I, use=ansi-mini, use=ansi+local1,
520 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
522 # The following is an entry for the full ANSI 3.64 (1977). It lacks
523 # padding, but most terminals using the standard are "fast" enough
524 # not to require any -- even at 9600 bps. If you encounter problems,
525 # try including the padding specifications.
527 # Note: the :as: and :ae: specifications are not implemented here, for
528 # the available termcap documentation does not make clear WHICH alternate
529 # character set to specify. ANSI 3.64 seems to make allowances for several.
530 # Please make the appropriate adjustments to fit your needs -- that is
531 # if you will be using alternate character sets.
533 # There are very few terminals running the full ANSI 3.64 standard,
534 # so I could only test this entry on one verified terminal (Visual 102).
535 # I would appreciate the results on other terminals sent to me.
537 # Please report comments, changes, and problems to:
539 # U.S. MAIL: Hugh Hansard
542 # Atlanta, GA. 30322.
544 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
546 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
547 ansi77|ANSI 3.64 standard 1977 version,
549 cols#80, it#8, lines#24,
550 bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
551 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
552 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
553 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
554 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
555 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
556 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
557 smso=\E[7m, smul=\E[4m,
559 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
560 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
561 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
562 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
563 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
564 # to confuse many emulators. On the other hand, we can count on these programs
565 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
566 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
567 # ANSI.SYS influence.
568 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
569 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
571 cols#80, it#8, lines#24,
572 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
573 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
574 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
575 hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
576 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
578 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
579 lines#25, use=pcansi-m,
580 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
581 lines#33, use=pcansi-m,
582 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
583 lines#43, use=pcansi-m,
584 # The color versions. All PC emulators do color...
585 pcansi|ibm-pc terminal programs claiming to be ansi,
586 use=klone+color, use=pcansi-m,
587 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
588 lines#25, use=pcansi,
589 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
590 lines#33, use=pcansi,
591 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
592 lines#43, use=pcansi,
594 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
595 # If you want pound signs rather than dollars, replace `B' with `A'
596 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
597 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
598 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
600 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
601 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
602 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
603 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
604 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
605 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
606 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
607 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
608 vpa=\E[%i%p1%dd, use=pcansi-m,
610 ansi+enq|ncurses extension for ANSI ENQ,
611 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
614 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
615 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
616 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
617 ansi|ansi/pc-term compatible with color,
618 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
620 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
621 # all the normal ANSI stuff with no extensions. It assumes
622 # insert/delete line/char is there, so it won't work with
623 # vt100 clones. It assumes video attributes for bold, blink,
624 # underline, and reverse, which won't matter much if the terminal
625 # can't do some of those. Padding is assumed to be zero, which
626 # shouldn't hurt since xon/xoff is assumed.
627 ansi-generic|ansiterm|generic ansi standard terminal,
629 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
630 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
631 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
632 use=ansi+sgrbold, use=ansi+arrows,
634 #### DOS ANSI.SYS variants
636 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
637 # documentation (except for the keyboard key reassignment feature, which
638 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
639 # though undocumented. The <pfkey> capability is untested but should work for
640 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
641 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
642 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
643 OTbs, am, mir, msgr, xon,
645 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
646 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
647 is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
648 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
649 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
650 u7=\E[6n, use=klone+color, use=klone+sgr8,
652 # Keypad: Home=\0G Up=\0H PrPag=\0I
653 # ka1,kh kcuu1 kpp,ka3
655 # Left=\0K 5=\0L Right=\0M
658 # End=\0O Down=\0P NxPag=\0Q
659 # kc1,kend kcud1 kc3,knp
664 # On keyboard with 12 function keys,
665 # shifted f-keys: F13-F24
666 # control f-keys: F25-F36
667 # alt f-keys: F37-F48
668 # The shift/control/alt keys do not modify each other, but alt overrides both,
669 # and control overrides shift.
671 # <pfkey> capability for F1-F48 -TD
672 ansi.sys|ANSI.SYS 3.1 and later versions,
673 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
674 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
675 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
676 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
677 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
678 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
679 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
680 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
681 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
682 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
683 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
684 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
685 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
686 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
687 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
691 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
692 # This should only be used when the terminal emulator cannot redefine the keys.
693 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
694 # definitions must be restored. If the terminal emulator is quit while in vi
695 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
696 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
697 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
698 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
699 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
700 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
701 # Consequently the End keypad key could not be set (it is relatively safe and
702 # actually useful because it sends ^@ O, which beeps and opens a line above).
703 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
704 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
705 \svi\s9-29-86\n\E[;75;8p,
706 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
707 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
708 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
709 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
712 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
713 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
714 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
715 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
718 # See ansi.sysk and nansi.sys above.
719 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
720 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
721 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
722 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
725 #### Atari ST terminals
727 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
729 tw52|tw52-color|Toswin window manager with color,
731 colors#16, pairs#0x100,
732 oc=\Eb?\Ec0, op=\Eb?\Ec0,
733 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
735 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
737 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
739 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
742 tw52-m|Toswin window manager monochrome,
745 bold=\Eya, dch1=\Ea, dim=\EyB,
746 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
747 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
748 smso=\EyQ, smul=\EyH, use=at-m,
749 tt52|Atari TT medium and high resolution,
750 lines#30, use=at-color,
751 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
753 colors#16, pairs#0x100,
754 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
755 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
756 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
757 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
758 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
760 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
761 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
762 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
763 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
765 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
766 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
767 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
768 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
770 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
771 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
772 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
773 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
776 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
778 cols#80, it#8, lines#24,
779 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
780 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
781 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
782 il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
783 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
784 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
785 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
786 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
787 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
788 kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
789 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
790 tw100|toswin vt100 window mgr,
792 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
793 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
795 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
796 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
797 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
798 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
799 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
800 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
801 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
802 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
803 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
804 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
805 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
806 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
807 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
808 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
809 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
810 rmso=\E[m, rmul=\E[m,
811 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
813 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
814 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
816 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
817 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
819 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
820 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
821 # The entries for stv52 and stv52pc probably need a revision.
822 stv52|MiNT virtual console,
824 cols#80, it#8, lines#30,
825 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
826 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
827 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
828 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
829 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
830 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
831 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
832 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
833 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
834 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
835 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
836 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
837 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
838 stv52pc|MiNT virtual console with PC charset,
840 cols#80, it#8, lines#30,
841 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
842 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
843 \363z\362{\343|\366}\234~\371,
844 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
845 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
846 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
847 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
848 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
849 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
850 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
851 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
852 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
853 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
854 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
855 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
858 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
861 cols#80, it#8, lines#25,
862 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
863 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
864 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
865 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
866 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
867 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
868 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
870 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
871 # MiNT VT52 emulation. 80 columns, 25 rows.
872 # MiNT is Now TOS, the operating system which comes with all Ataris now
873 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
874 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
875 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
876 st52-old|Atari ST with VT52 emulation,
879 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
880 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
881 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
882 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
883 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
884 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
885 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
886 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
887 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
892 ######## Terminal.app
894 # nsterm*|Apple_Terminal - AppKit Terminal.app
896 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
897 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
898 # Server and Mac OS X operating systems. There is also a
899 # "terminal.app" in GNUstep, but I believe it to be an unrelated
900 # codebase and I have not attempted to describe it here.
902 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
903 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
904 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
905 # version supports color.
907 # To determine the version of Terminal.app you're using by running:
909 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
911 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
913 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
915 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
917 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
919 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
921 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
922 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
923 # might work too, but really you're on your own here since these
924 # systems are very obsolete and I can't test them. I do welcome
925 # patches, though :).
929 # For GNUstep_Terminal, you're probably best off using "linux" or
930 # writing your own terminfo.
932 # For MacTelnet, you're on your own. It's a different codebase, and
933 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
935 # For iTerm.app, see "iterm".
938 # The AppKit Terminal.app descriptions all have names beginning with
939 # "nsterm". Note that the statusline (-s) versions use the window
940 # titlebar as a phony status line, and may produce warnings during
941 # compilation as a result ("tsl uses 0 parameters, expected 1".)
942 # Ignore these warnings, or even ignore these entries entirely. Apps
943 # which need to position the cursor or do other fancy stuff inside the
944 # status line won't work with these entries. They're primarily useful
945 # for programs like Pine which provide simple notifications in the
946 # status line. Please note that non-ASCII characters don't work right
947 # in the status line, since Terminal.app incorrectly interprets their
948 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
949 # versions) or only accepts status lines consisting entirely of
950 # characters from the first 256 Unicode positions (including C1 but
953 # The Mythology* of AppKit Terminal.app:
955 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible
956 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
957 # shareware replacement for Terminal called "Stuart" which NeXT bought
958 # and used as the basis for the Terminal.app in NeXTSTEP 2+,
959 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
960 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
961 # capabilities for the early versions, but I believe that the
962 # TERM_PROGRAM_VERSION may have been reset at some point.
964 # The early versions were tailored to the NeXT character set. Sometime
965 # after the Apple acquisition the encoding was switched to MacRoman
966 # (initially with serious altcharset bugs due to incomplete conversion
967 # of the old NeXT code,) and then later to UTF-8. Also sometime during
968 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
969 # 8-color support (initially buggy when combined with attributes, but
970 # that was later fixed.) More recently, around Mac OS X version 10.3
971 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
972 # some versions (for instance 133-1 which shipped with Mac OS X
973 # version 10.4) this suffered from the <bce> bug, but that seems to
974 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
976 # In the early days of Mac OS X the terminal was fairly buggy and
977 # would routinely crash under load. Many of these bugs seem to have
978 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
979 # some may still remain. This change seems to correspond to
980 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
983 # * This may correspond with what actually happened, but I don't
984 # know. It is based on guesswork, hearsay, private correspondence,
985 # my faulty memory, and the following online sources and references:
987 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
988 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
990 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
991 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
993 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
994 # "nsterm" to comply with the name length and case conventions and
995 # limitations of various software packages [notably Solaris terminfo
996 # and UNIX.] A single Apple_Terminal alias is retained for
997 # backwards-compatibility.
999 # * Added function key support (F1-F4). These only work in Terminal.app
1000 # version 51, hopefully the capabilities won't cause problems for people
1003 # * Added "full color" (-c) entries which support the 16-color mode in
1006 # * By default, version 51 uses UTF-8 encoding with broken altcharset
1007 # support, so "ASCII" (-7) entries without altcharset support were
1010 # nsterm - AppKit Terminal.app
1012 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
1013 # Terminal.app. It is a partial VT100 emulation with some xterm-like
1014 # extensions. This terminfo was written to describe versions 41
1015 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
1016 # version 10.1) of Terminal.app.
1018 # Terminal.app runs under the Mac OS X Quartz windowing system (and
1019 # other AppKit-supported windowing systems.) On the Mac OS X machine I
1020 # use, the executable for Terminal.app is:
1021 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
1023 # If you're looking for a description of the full-screen system
1024 # console which runs under Apple's Darwin operating system on PowerPC
1025 # platforms, see the "xnuppc" entry instead.
1027 # There were no function keys in version 41. In version 51, there are
1028 # four working function keys (F1, F2, F3 and F4.) The function keys
1029 # are included in all of these entries.
1031 # It does not support mouse pointer position reporting. Under some
1032 # circumstances the cursor can be positioned using option-click; this
1033 # works by comparing the cursor position and the selected position,
1034 # and simulating enough cursor-key presses to move the cursor to the
1035 # selected position. This technique fails in all but the simplest
1038 # It provides partial ANSI color support (background colors interacted
1039 # badly with bold in version 41, though, as reflected in :ncv:.) The
1040 # monochrome (-m) entries are useful if you've disabled color support
1041 # or use a monochrome monitor. The full color (-c) entries are useful
1042 # in version 51, which doesn't exhibit the background color bug. They
1043 # also enable an xterm-compatible 16-color mode.
1045 # The configurable titlebar is set using xterm-compatible sequences;
1046 # it is used as a status bar in the statusline (-s) entries. Its width
1047 # depends on font sizes and window sizes, but 50 characters seems to
1048 # be the default for an 80x24 window.
1050 # The MacRoman character encoding is used for some of the alternate
1051 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
1052 # disable alternate character set support entirely, and the "VT100"
1053 # (-acs) entries rely instead on Terminal.app's own buggy VT100
1054 # graphics emulation, which seems to think the character encoding is
1055 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
1056 # are useful in Terminal.app version 51, which supports UTF-8 and
1057 # other ASCII-compatible character encodings but does not correctly
1058 # implement VT100 graphics; once VT100 graphics are correctly
1059 # implemented in Terminal.app, the "VT100" (-acs) entries should be
1060 # usable in any ASCII-compatible character encoding [except perhaps
1061 # in UTF-8, where some experts argue for disallowing alternate
1062 # characters entirely.]
1064 # Terminal.app reports "vt100" as the terminal type, but exports
1065 # several environment variables which may aid detection in a shell
1066 # profile (i.e. .profile or .login):
1069 # TERM_PROGRAM=Apple_Terminal
1070 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
1071 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
1073 # For example, the following Bourne shell script would detect the
1074 # correct terminal type:
1076 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
1079 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
1087 # In a C shell derivative, this would be accomplished by:
1089 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
1090 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
1091 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
1092 # setenv TERM "nsterm-old"
1094 # setenv TERM "nsterm-c-7"
1099 # The '+' entries are building blocks
1100 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
1101 am, bw, msgr, xenl, xon,
1102 cols#80, it#8, lines#24,
1103 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
1104 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1105 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
1106 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1107 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
1108 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
1109 ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
1110 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
1111 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1112 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1113 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1114 %p5%t;2%;%?%p7%t;8%;m,
1115 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1116 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
1118 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
1119 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1120 enacs=\E(B\E)0, rmacs=^O,
1121 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1122 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1123 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1125 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
1126 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i
1127 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
1128 \271|\255}\243~\245,
1129 enacs=\E(B\E)0, rmacs=^O,
1130 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1131 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1132 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1134 # compare with xterm+sl-twm
1135 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
1136 wsl#50, use=xterm+sl-twm,
1138 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
1139 op=\E[0m, use=ibm+16color,
1141 nsterm+c41|AppKit Terminal.app v41 color support,
1142 colors#8, ncv#37, pairs#64,
1143 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1145 # These are different combinations of the building blocks
1147 # ASCII charset (-7)
1148 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
1151 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
1152 use=nsterm+s, use=nsterm+7,
1154 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
1155 use=nsterm+c41, use=nsterm+7,
1157 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
1158 use=nsterm+c, use=nsterm+7,
1160 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
1161 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
1163 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
1164 use=nsterm+s, use=nsterm+c, use=nsterm+7,
1166 # VT100 alternate-charset (-acs)
1167 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
1170 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
1171 use=nsterm+s, use=nsterm+acs,
1173 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
1174 use=nsterm+c41, use=nsterm+acs,
1176 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
1177 use=nsterm+c, use=nsterm+acs,
1179 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
1180 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
1182 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
1183 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
1186 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
1189 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
1190 use=nsterm+s, use=nsterm+mac,
1192 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
1193 use=nsterm+c41, use=nsterm+mac,
1195 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
1196 use=nsterm+c, use=nsterm+mac,
1198 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
1199 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
1201 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
1202 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
1204 # In Mac OS X version 10.5 the format of the preferences has changed
1205 # and a new, more complex technique is needed, e.g.,
1207 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
1208 # "NSUserDefaults");ud=NSUserDefaults.alloc();
1209 # ud.init();prefs=ud.persistentDomainForName_(
1210 # "com.apple.Terminal");prefs["Window Settings"][
1211 # prefs["Default Window Settings"]]["TerminalType"
1212 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
1213 # "com.apple.Terminal")' nsterm-16color
1215 # and it is still not settable from the preferences dialog. This is
1216 # tracked under rdar://problem/7365108 and rdar://problem/7365134
1217 # in Apple's bug reporter.
1219 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
1220 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
1221 # vt52, vt100, vt102 and xterm.
1222 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
1224 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
1225 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
1226 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
1227 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1228 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1229 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
1230 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
1231 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
1232 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
1233 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
1235 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
1236 # the background color erase feature. The newer version 240.2 in Mac OS X
1237 # version 10.5 does not.
1239 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
1240 # and D P Schreber comparing to nsterm-c-s-acs.
1242 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
1243 # can be set in Terminal.app, e.g.,
1245 # defaults write com.apple.Terminal TermCapString nsterm-bce
1247 # and that it is not set in Terminal's preferences dialog.
1249 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
1252 # * The terminal description matches the default settings.
1253 # * The keyboard is configurable via a dialog.
1254 # * By default khome, kend, knext and kprev are honored only with a
1256 # * There are bindings for control left/right arrow (but not up/down).
1257 # Added those to nsterm-16color, which is the version used for OS X 10.6
1258 # * "Allow VT100 application keypage mode" is by default disabled.
1259 # There is no way to press keypad-comma unless application mode is enabled
1261 # * 132-column mode stopped working during vttest's tests. Consider it broken.
1262 # * CHT, REP, SU, SD are buggy.
1263 # * ECH works (also in Leopard), but is not used here for compatibility.
1264 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
1265 # xterm-256color. However, it adds "nsterm", so it is possible to use the
1266 # nsterm entry from this file to override the MacPorts (20110404) or
1267 # system (20081102) copy of this file.
1268 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
1269 # dialog defaults to xterm-256color. Alternative selections are ansi,
1270 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
1271 # the menu says "Declare terminal as" without promising to actually emulate
1272 # the corresponding terminals. Indeed, changing TERM does not affect the
1273 # emulation itself. This means that
1274 # + the function-keys do not match for dtterm for kf1-kf4 as well as
1276 # + the color model is the same for each setting of TERM (does not match
1278 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
1279 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
1280 # + the vt52 emulation does not give a usable shell because screen-clearing
1281 # does not work as expected.
1282 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
1283 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
1284 # as well as unmasking F10 (which had been used in the window manager). Those
1285 # keys are listed in this entry.
1286 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
1287 bce, use=nsterm-16color,
1289 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
1290 # TERM_PROGRAM_VERSION=309
1291 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
1292 # TERM_PROGRAM_VERSION=303
1293 nsterm-256color|Terminal.app in OS X 10.8,
1294 use=xterm+256setaf, use=nsterm-bce,
1296 # removed bogus kDC7 -TD
1297 nsterm-build326|Terminal.app in OS X 10.9,
1298 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
1299 kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
1300 kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-256color,
1303 nsterm-build343|Terminal.app in OS X 10.10,
1304 kend=\EOF, khome=\EOH, use=nsterm-build326,
1306 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
1308 # + no vt52 mode for cursor keys, though vt52 screen works in vttest
1309 # + f1-f4 map to pf1-pf4
1310 # + no vt220 support aside from DECTCEM and ECH
1311 # + there are no protected areas. Forget about anything above vt220.
1312 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
1313 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
1314 # + but bce fails for 11.6.7.2 (test repeat).
1315 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
1316 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
1317 # + normal (not X10 or Highlight tracking) mouse now works.
1318 # + mouse any-event works
1319 # + mouse button-event works
1320 # + in alternate screen:
1322 # mode 1047 fails to restore cursor position (do not use)
1323 # mode 1049 fails to restore screen contents (do not use)
1324 # + dtterm window-modify operations work (some messages are not printed)
1325 # + dtterm window-report gives size of window in characters/pixels as
1326 # well as state of window.
1328 # + there is no difference between cnorm/cvvis
1329 # + has dim/invis/blink (no protect of course)
1330 # + most function keys with shift/control modifiers give beep
1331 # (user can configure, but out-of-the-box is what I record)
1332 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
1334 # + kLFT5/kRIT5 work, but not up/down with control-modifier
1335 # + kLFT/kRIT work, but not up/down with shift-modifier
1336 # + there are a few predefined bindings with Alt, but no clear pattern.
1337 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
1338 # Using ncurses test-program with xterm-new:
1340 # Using xterm's scripts:
1341 # + palette for 256-colors is hardcoded.
1342 # + no support for "dynamic colors"
1343 # + no support for tcap-query.
1344 nsterm-build361|Terminal.app in OS X 10.11,
1346 kmous=\E[M, use=nsterm-build343,
1348 # reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
1349 # Comparing with build361, little has changed, except that italics work.
1350 # Direct-color is not supported, by the way.
1352 # Improved rmso/rmul -TD
1353 nsterm-build400|Terminal.app in OS X 10.13,
1354 rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
1355 use=ecma+italics, use=nsterm-build361,
1357 # This is an alias which should always point to the "current" version
1358 nsterm|Apple_Terminal|AppKit Terminal.app,
1359 use=nsterm-build400,
1361 ######## iTerm, iTerm2
1365 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more
1366 # featureful) terminal emulator for Mac OS X. It is similar enough in
1367 # capabilities to nsterm-16color that I have derived this description from that
1368 # one, but as far as I know they share no code. Many of the features are
1369 # user-configurable, but I attempt only to describe the default configuration
1372 # According to its documentation, iTerm uses terminfo to obtain function key
1373 # definitions. For example, if it is started with TERM=xterm, it uses key
1374 # definitons from that terminal description from the local OSX machine. Those
1375 # $TERM settings may be augmented using the bookmark and profile dialogs.
1376 # However, the behavior seen with tack does not agree with either the terminfo
1377 # description or the function keys in its "xterm" profile.
1381 # reports primary DA as VT100 with AVO: \E[?1;2c
1382 # reports secondary DA as "\E[>0;95;c"
1383 # supports blink and underline
1384 # displays bold text as red
1385 # recognizes all dtterm controls for modifying/querying window
1386 # resizing via escape sequence is very slow
1387 # supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking)
1388 # supports X11R5 alternate screen and XFree86 1049 (no 1047/1048)
1389 # supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA
1392 # with ncurses test-program:
1393 # ncurses 'k' has problem in second screen; light background does not fill
1394 # with xterm scripts
1395 # can display/alter xterm-256color cube
1396 # can display/alter xterm-88color cube
1397 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
1398 am, bce, hs, mir, msgr, npc, xenl, xon,
1399 cols#80, it#8, lines#24, wsl#50,
1400 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1401 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1402 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
1403 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1404 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
1405 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1406 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1407 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
1408 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
1409 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
1410 il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?,
1411 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1412 kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
1413 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1414 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1415 khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8,
1416 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
1417 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
1418 rmso=\E[m, rmul=\E[m,
1419 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1420 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
1422 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
1423 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
1424 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
1425 vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
1426 use=xterm+sl-twm, use=vt100+keypad, use=xterm+x11mouse,
1431 # https://www.iterm2.com/
1432 # https://github.com/gnachman/iTerm2
1433 # ~/Library/Preferences/com.googlecode.iterm2.plist
1434 # "iTerm" stalled in 2009. A different set of developers began "iTerm2".
1438 # reports primary DA as VT100 with AVO: \E[?1;2c
1439 # reports secondary DA as "\E[>0;95;0c"
1440 # numeric keypad application mode does not work
1441 # by default, dtterm window-modifications are ignored
1442 # by default, dtterm window-reports return, but icon as "L", window as "l"
1443 # supports SD/SU, no REP, SL, SR
1444 # supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR)
1445 # no improvement to XFree86 1047/1048 modes
1447 # in meta-mode, imitates xterm, sending UTF-8
1448 # special-key modifiers based on xterm use incompatible default for alt/meta
1449 # with ncurses test-program:
1451 # no improvement to ncurses 'k'
1452 # with xterm scripts:
1455 # Italic text did not work initially, apparently because upgrading did not
1456 # add/change that preference (set in Preferences, Profiles, Text). A new
1457 # install of iTerm 3.0.15 provides italics by default (blinking text:no).
1459 # 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5
1460 iTerm2.app|iterm2|terminal emulator for Mac OS X,
1461 blink@, dim=\E[2m, kEND=\E[1;2F, kHOM=\E[1;2H, ka1@, ka3@,
1462 kb2@, kc1@, kc3@, kent@, kf13=\E[1;2P, kf14=\E[1;2Q,
1463 kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
1464 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
1465 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
1466 kind=\E[1;2B, kri=\E[1;2A,
1467 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1468 %p5%t;2%;m%?%p9%t\016%e\017%;,
1469 kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B,
1470 kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F,
1471 kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H,
1472 kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H,
1473 kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D,
1474 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~,
1475 kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C,
1476 kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A,
1477 kUP5=\E[1;5A, kUP6=\E[1;6A, use=ecma+italics, use=iterm,
1479 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
1481 # On PowerPC platforms, Apple's Darwin operating system uses a
1482 # full-screen system console derived from a NetBSD framebuffer
1483 # console. It is an ANSI-style terminal, and is not really VT-100
1486 # Under Mac OS X, this is the system console driver used while in
1487 # single-user mode [reachable by holding down Command-S during the
1488 # boot process] and when logged in using console mode [reachable by
1489 # typing ">console" at the graphical login prompt.]
1491 # If you're looking for a description of the Terminal.app terminal
1492 # emulator which runs under the Mac OS X Quartz windowing system (and
1493 # other AppKit-supported windowing systems,) see the "nsterm"
1496 # NOTE: Under Mac OS X version 10.1, the default login window does not
1497 # prompt for user name, instead requiring an icon to be selected from
1498 # a list of known users. Since the special ">console" login is not in
1499 # this list, you must make one of two changes in the Login Window
1500 # panel of the Login section of System Prefs to make the special
1501 # ">console" login accessible. The first option is to enable 'Show
1502 # "Other User" in list for network users', which will add a special
1503 # "Other..." icon to the graphical login panel. Selecting "Other..."
1504 # will present the regular graphical login prompt. The second option
1505 # is to change the 'Display Login Window as:' setting to 'Name and
1506 # password entry fields', which replaces the login panel with a
1507 # graphical login prompt.
1509 # There are no function keys, at least not in Darwin 1.3.
1511 # It has no mouse support.
1513 # It has full ANSI color support, and color combines correctly with
1514 # all three supported attributes: bold, inverse-video and underline.
1515 # However, bold colored text is almost unreadable (bolding is
1516 # accomplished using shifting and or-ing, and looks smeared) so bold
1517 # has been excluded from the list of color-compatible attributes
1518 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
1519 # monochrome monitor.
1521 # There is one serious bug with this terminal emulation's color
1522 # support: repositioning the cursor onto a cell with non-matching
1523 # colors obliterates that cell's contents, replacing it with a blank
1524 # and displaying a colored cursor in the "current" colors. There is
1525 # no complete workaround at present [other than using the monochrome
1526 # (-m) entries,] but removing the (msgr) capability seemed to help.
1528 # The "standout" chosen was simple reverse-video, although a colorful
1529 # standout might be more aesthetically pleasing. Similarly, the bold
1530 # chosen is the terminal's own smeared bold, although a simple
1531 # color-change might be more readable. The color-bold (-b) entries
1532 # uses magenta colored text for bolding instead. The fancy color (-f
1533 # and -f2) entries use color for bold, standout and underlined text
1534 # (underlined text is still underlined, though.)
1536 # Apparently the terminal emulator does support a VT-100-style
1537 # alternate character set, but all the alternate character set
1538 # positions have been left blank in the font. For this reason, no
1539 # alternate character set capabilities have been included in this
1540 # description. The console driver appears to be ASCII-only, so (enacs)
1541 # has been excluded [although the VT-100 sequence does work.]
1543 # The default Mac OS X and Darwin installation reports "vt100" as the
1544 # terminal type, and exports no helpful environment variables. To fix
1545 # this, change the "console" entry in /etc/ttys from "vt100" to
1546 # "xnuppc-WxH", where W and H are the character dimensions of your
1547 # console (see below.)
1549 # The font used by the terminal emulator is apparently one originally
1550 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
1551 # file includes descriptions for the following geometries:
1553 # Pixels Characters Entry Name (append -m for monochrome)
1554 # -------------------------------------------------------------------
1555 # 640x400 80x25 xnuppc-80x25
1556 # 640x480 80x30 xnuppc-80x30
1557 # 720x480 90x30 xnuppc-90x30
1558 # 800x600 100x37 xnuppc-100x37
1559 # 896x600 112x37 xnuppc-112x37
1560 # 1024x640 128x40 xnuppc-128x40
1561 # 1024x768 128x48 xnuppc-128x48
1562 # 1152x768 144x48 xnuppc-144x48
1563 # 1280x1024 160x64 xnuppc-160x64
1564 # 1600x1024 200x64 xnuppc-200x64
1565 # 1600x1200 200x75 xnuppc-200x75
1566 # 2048x1536 256x96 xnuppc-256x96
1568 # The basic "xnuppc" entry includes no size information, and the
1569 # emulator includes no reporting capability, so you'll be at the mercy
1570 # of the TTY device (which reports incorrectly on my hardware.) The
1571 # color-bold entries do not include size information.
1573 # The '+' entries are building blocks
1574 xnuppc+basic|Darwin PowerPC Console basic capabilities,
1577 bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1578 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
1579 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1580 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
1581 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?,
1582 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
1583 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
1584 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1586 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1587 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1588 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
1590 xnuppc+c|Darwin PowerPC Console ANSI color support,
1591 colors#8, ncv#32, pairs#64,
1592 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1594 xnuppc+b|Darwin PowerPC Console color-bold support,
1597 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1600 xnuppc+f|Darwin PowerPC Console fancy color support,
1602 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
1604 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
1606 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
1609 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
1610 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
1612 # Building blocks for specific screen sizes
1613 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
1616 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
1619 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
1622 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
1625 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
1628 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
1631 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
1634 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
1637 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
1640 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
1643 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
1646 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
1647 cols#0x100, lines#96,
1649 # These are different combinations of the building blocks
1651 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
1654 xnuppc|darwin|Darwin PowerPC Console (color),
1655 use=xnuppc+c, use=xnuppc+basic,
1657 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
1660 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
1661 use=xnuppc+b, use=xnuppc+c,
1663 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
1666 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
1667 use=xnuppc+f, use=xnuppc+c,
1669 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
1672 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
1673 use=xnuppc+f2, use=xnuppc+c,
1675 # Combinations for specific screen sizes
1676 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
1677 use=xnuppc+80x25, use=xnuppc+basic,
1679 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
1680 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
1682 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
1683 use=xnuppc+80x30, use=xnuppc+basic,
1685 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
1686 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
1688 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
1689 use=xnuppc+90x30, use=xnuppc+basic,
1691 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
1692 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
1694 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
1695 use=xnuppc+100x37, use=xnuppc+basic,
1697 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
1698 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
1700 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
1701 use=xnuppc+112x37, use=xnuppc+basic,
1703 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
1704 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
1706 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
1707 use=xnuppc+128x40, use=xnuppc+basic,
1709 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
1710 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
1712 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
1713 use=xnuppc+128x48, use=xnuppc+basic,
1715 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
1716 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
1718 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
1719 use=xnuppc+144x48, use=xnuppc+basic,
1721 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
1722 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
1724 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
1725 use=xnuppc+160x64, use=xnuppc+basic,
1727 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
1728 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
1730 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
1731 use=xnuppc+200x64, use=xnuppc+basic,
1733 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
1734 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
1736 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
1737 use=xnuppc+200x75, use=xnuppc+basic,
1739 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
1740 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
1742 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
1743 use=xnuppc+256x96, use=xnuppc+basic,
1745 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
1746 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
1751 # BeOS entry for Terminal program Seems to be almost ANSI
1752 beterm|BeOS Terminal,
1753 am, eo, mir, msgr, xenl, xon,
1754 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
1755 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
1756 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1757 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
1758 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1759 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1760 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
1761 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1762 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
1763 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
1764 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
1765 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
1766 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
1767 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
1768 nel=\r\n, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
1769 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
1770 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1771 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
1772 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
1773 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
1779 # This entry is good for the 1.2.13 or later version of the Linux console.
1781 # ***************************************************************************
1784 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
1785 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
1786 # * character. Here are the keymap replacement lines that will set this up: *
1788 # keycode 15 = Tab Tab
1789 # alt keycode 15 = Meta_Tab
1790 # shift keycode 15 = F26
1791 # string F26 ="\033[Z"
1793 # * This has to use a key slot which is unfortunate (any unused one will *
1794 # * do, F26 is the higher-numbered one). The change ought to be built *
1795 # * into the kernel tables. *
1797 # ***************************************************************************
1799 # All linux kernels since 1.2.13 (at least) set the screen size
1800 # themselves; this entry assumes that capability.
1802 linux-basic|linux console,
1803 am, bce, eo, mir, msgr, xenl, xon,
1805 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1806 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1807 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1808 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1809 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1810 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1811 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1812 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1813 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
1814 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1815 il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
1816 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1817 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
1818 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1819 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1820 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
1821 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1822 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1823 kspd=^Z, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1824 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
1825 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1826 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1827 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
1828 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
1831 linux-m|Linux console no color,
1833 setab@, setaf@, setb@, setf@, use=linux,
1835 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1836 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1837 # not supposedly back-portable to older SV curses (although it has worked fine
1838 # on Solaris for several years) and not supported in ncurses versions before
1840 linux-c-nc|linux console with color-change,
1842 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
1843 %02x%p4%{255}%*%{1000}%/%02x,
1844 oc=\E]R, use=linux-basic,
1845 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1846 linux-c|linux console 1.3.6+ for older ncurses,
1848 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1849 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1850 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1851 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1852 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1853 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1854 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1855 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1857 oc=\E]R, use=linux-basic,
1859 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1860 # get a block cursor for cvvis.
1861 # reported by Frank Heckenbach <frank@g-n-u.de>.
1862 linux2.2|linux 2.2.x console,
1863 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1864 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1866 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1867 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1868 # Although the kernel has mappings for these, they were not in the default
1869 # font (tested with Debian and Fedora):
1875 linux2.6|linux 2.6.x console,
1876 acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
1878 enacs=\E)0, rmacs=^O,
1879 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1880 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1881 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1883 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1884 # It is the same as xterm's erase-saved-lines feature.
1885 linux3.0|linux 3.0 kernels,
1886 E3=\E[3J, use=linux2.6,
1888 # This is Linux console for ncurses.
1889 linux|linux console,
1892 # Subject: linux 2.6.26 vt back_color_erase
1893 # Changes to the Linux console driver broke bce model as reported in
1894 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1896 # http://lkml.org/lkml/2008/4/26/305
1897 # http://lkml.org/lkml/2008/10/3/66
1898 linux2.6.26|linux console w/o bce,
1901 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1902 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1903 ich@, ich1@, use=linux,
1905 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1906 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1907 linux-koi8|linux with koi8 alternate character set,
1908 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1909 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1910 \211w\210x\201y\230z\231{\267|\274~\224,
1911 use=linux, use=klone+koi8acs,
1913 # Another entry for KOI8-r with Qing Long's acsc.
1914 # (which one better complies with the standard?)
1915 linux-koi8r|linux with koi8-r alternate character set,
1916 use=linux, use=klone+koi8acs,
1918 # Entry for the latin1 and latin2 fonts
1919 linux-lat|linux with latin1 or latin2 alternate character set,
1920 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1921 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1922 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1925 # This uses graphics from VT codeset instead of from cp437.
1926 # reason: cp437 (aka "straight to font") is not functional under luit.
1927 # from: Andrey V Lukyanov <land@long.yar.ru>.
1928 linux-vt|linux console using VT codes for graphics,
1929 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1931 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1934 # This is based on the Linux console (relies on the console to perform some
1935 # of the functionality), but does not recognize as many control sequences.
1936 # The program comes bundled with an old (circa 1998) copy of the Linux
1937 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1938 # \E* move cursor to home, as as \E[H
1940 # \EE move cursor to beginning of row
1941 # \E[y,xf same as \E[y,xH
1943 # Note: The status-line support is buggy (dsl does not work).
1944 kon|kon2|jfbterm|Kanji ON Linux console,
1946 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1947 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1951 # Another variant. There are two parts (src, src/lib) with the latter
1952 # comprising the escape-sequence parsing. The copyright notice on that
1953 # says it is based on GTerm by Timothy Miller.
1955 # The original developer "dragchan" has left, but as of March 2017 there is
1956 # (still dead) code from May 2015 here:
1957 # https://github.com/izmntuk/fbterm
1959 # The acsc string may be incorrect.
1961 # Not used here, the program recognizes escapes for italic, underline and
1962 # dim, rendering those as green, cyan and gray respectively.
1963 fbterm|FbTerm for Linux with framebuffer,
1964 colors#0x100, pairs#0x10000,
1965 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1966 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1967 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1968 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
1969 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
1970 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1971 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1972 sgr0=\E[0;10m, smacs=\E[11m, use=linux,
1974 # 16-color linux console entry; this works with a 256-character
1975 # console font but bright background colors turn into dim ones when
1976 # you use a 512-character console font. This uses bold for bright
1977 # foreground colors and blink for bright background colors.
1978 linux-16color|linux console with 16 colors,
1979 colors#16, ncv#42, pairs#0x100,
1980 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1981 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
1984 # bterm (bogl 0.1.18)
1985 # Implementation is in bogl-term.c
1986 # Key capabilities from linux terminfo entry
1989 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1990 # bterm does not support sgr, since it only processes one parameter -TD
1991 bterm|bogl virtual terminal,
1993 colors#8, cols#80, lines#24, pairs#64,
1994 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1995 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
1996 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=\n,
1997 kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1998 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1999 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2000 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2001 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
2002 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
2003 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
2004 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n,
2005 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
2006 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2007 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
2012 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
2015 cols#80, it#8, lines#25,
2016 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
2017 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2018 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2019 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2020 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
2021 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2022 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
2023 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2024 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
2025 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
2026 smso=\E[7m, smul=\E[4m,
2027 mach-bold|Mach Console with bold instead of underline,
2028 rmul=\E[0m, smul=\E[1m, use=mach,
2029 mach-color|Mach Console with ANSI color,
2031 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
2032 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
2034 # From: Samuel Thibault
2035 # Source: git://git.sv.gnu.org/hurd/gnumach.git
2036 # Files: i386/i386at/kd.c
2038 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
2040 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
2041 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
2042 \263y\363z\362{\343|\330}\234~\376,
2043 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
2044 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
2045 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
2046 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
2047 2%;%?%p6%t;1%;%?%p7%t;8%;m,
2050 mach-gnu-color|Mach Console with ANSI color,
2052 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
2053 setaf=\E[3%p1%dm, use=mach-gnu,
2055 # From: Marcus Brinkmann
2056 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
2058 # Comments in the original are summarized here:
2060 # hurd uses 8-bit characters (km).
2062 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
2064 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
2065 # have the eat_newline_glitch. It doesn't support setting or removing tab
2068 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
2069 # one byte instead three.
2071 # <ich1> is not included because hurd has insert mode.
2073 # hurd doesn't use ^J for scrolling, because this could put things into the
2074 # scrollback buffer.
2076 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
2077 # This is a GNU extension.
2079 # The original has commented-out ncv, but is restored here.
2081 # Reading the source, RIS resets cnorm, but not xmous.
2082 hurd|The GNU Hurd console server,
2083 am, bce, bw, eo, km, mir, msgr, xenl, xon,
2084 colors#8, it#8, ncv#18, pairs#64,
2085 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2087 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2088 clear=\Ec, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2089 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2090 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2091 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
2092 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
2093 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
2094 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
2095 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
2096 invis=\E[8m, kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\EOD,
2097 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
2098 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
2099 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2100 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2101 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
2102 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2103 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2104 kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
2105 rin=\E[%p1%dT, rmacs=\E[10m, rmir=\E[4l, rmso=\E[27m,
2106 rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7, setab=\E[4%p1%dm,
2108 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
2109 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2110 sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
2111 smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h,
2118 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
2119 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
2120 # right corner without triggering a scroll. The ncurses terminfo library can
2121 # handle this case with the <ich1> capability, and prefers <am> for better
2122 # optimization. Bug: The <op> capability resets attributes.
2123 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
2124 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
2125 qnx|qnx4|qnx console,
2126 daisy, km, mir, msgr, xhpa, xt,
2127 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
2128 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
2129 \303u\264v\301w\302x\263,
2130 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
2131 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
2132 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
2133 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
2134 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
2135 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
2136 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
2137 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
2138 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
2139 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
2140 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
2141 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
2142 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
2143 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
2144 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
2145 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
2146 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
2147 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
2148 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
2149 kext=\377\270, kf1=\377\201, kf10=\377\212,
2150 kf11=\377\256, kf12=\377\257, kf13=\377\213,
2151 kf14=\377\214, kf15=\377\215, kf16=\377\216,
2152 kf17=\377\217, kf18=\377\220, kf19=\377\221,
2153 kf2=\377\202, kf20=\377\222, kf21=\377\223,
2154 kf22=\377\224, kf23=\377\333, kf24=\377\334,
2155 kf25=\377\225, kf26=\377\226, kf27=\377\227,
2156 kf28=\377\230, kf29=\377\231, kf3=\377\203,
2157 kf30=\377\232, kf31=\377\233, kf32=\377\234,
2158 kf33=\377\235, kf34=\377\236, kf35=\377\276,
2159 kf36=\377\277, kf37=\377\321, kf38=\377\322,
2160 kf39=\377\323, kf4=\377\204, kf40=\377\324,
2161 kf41=\377\325, kf42=\377\326, kf43=\377\327,
2162 kf44=\377\330, kf45=\377\331, kf46=\377\332,
2163 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
2164 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
2165 khlp=\377\350, khome=\377\240, khts=\377\342,
2166 kich1=\377\253, kil1=\377\273, kind=\377\261,
2167 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
2168 knp=\377\252, knxt=\377\312, kopn=\377\357,
2169 kopt=\377\353, kpp=\377\242, kprt=\377\255,
2170 kprv=\377\302, krdo=\377\336, kref=\377\354,
2171 kres=\377\360, krfr=\377\347, kri=\377\271,
2172 krmir=\377\313, krpl=\377\362, krst=\377\352,
2173 ksav=\377\361, kslt=\377\247, kspd=\377\335,
2174 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
2175 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
2176 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
2177 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
2181 qnxt|qnxt4|QNX4 terminal,
2184 qnxm|QNX4 with mouse events,
2186 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
2187 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
2188 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
2189 smicm=\E/>2h, use=qnx4,
2194 # Monochrome QNX4 terminal or console. Setting this terminal type will
2195 # allow an application running on a color console to behave as if it
2196 # were a monochrome terminal. Output will be through stdout instead of
2197 # console writes because the term routines will recognize that the
2198 # terminal name starts with 'qnxt'.
2200 qnxtmono|Monochrome QNX4 terminal or console,
2204 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
2205 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
2206 # (TD: derive from original qnx4 entry)
2207 qnxt2|qnx 2.15 serial terminal,
2209 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
2210 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
2212 # QNX ANSI terminal definition
2215 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
2216 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2217 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2218 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=\r,
2219 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
2220 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2221 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
2222 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
2223 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
2224 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
2225 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
2226 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
2227 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
2228 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
2229 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
2230 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
2231 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
2232 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
2233 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
2234 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
2235 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
2236 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
2237 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
2238 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
2239 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
2240 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
2241 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
2242 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
2243 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
2244 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
2245 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
2246 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
2247 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
2248 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
2249 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
2250 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
2251 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
2252 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
2253 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
2254 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2255 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2257 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2259 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
2260 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
2261 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
2262 smul=\E[4m, tbc=\E[3g,
2263 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
2265 qansi|QNX ansi with console writes,
2266 daisy, xhpa, use=qansi-g,
2268 qansi-t|QNX ansi without console writes,
2271 qansi-m|QNX ansi with mouse,
2273 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
2274 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
2275 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
2276 smicm=\E[>2h, use=qansi,
2278 qansi-w|QNX ansi for windows,
2283 # SCO console and SOS-Syscons console for 386bsd
2284 # (scoansi: had unknown capabilities
2285 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
2286 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
2287 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
2288 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
2289 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
2290 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
2291 # on the <smacs>=\E[12m -- esr)
2293 # klone+sgr-dumb is an error since the acsc does not match -TD
2295 # In this description based on SCO's keyboard(HW) manpage list of default
2296 # function key values:
2297 # F13-F24 are shifted F1-F12
2298 # F25-F36 are control F1-F12
2299 # F37-F48 are shift+control F1-F12
2301 # hpa/vpa work in the console, but not in scoterm:
2305 # SCO's terminfo uses
2308 # which do not work (console or scoterm).
2310 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
2311 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
2312 OTbs, am, bce, eo, xon,
2313 colors#8, cols#80, it#8, lines#25, pairs#64,
2314 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM
2315 NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB
2317 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
2318 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
2319 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2320 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2321 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
2322 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
2323 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
2324 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
2325 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
2326 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2327 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2328 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
2329 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
2330 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
2331 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
2332 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
2333 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
2334 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
2335 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
2336 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
2337 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
2338 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
2339 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2340 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
2341 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
2342 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
2344 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
2345 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
2346 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
2347 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
2348 %p7%t;8%;%?%p9%t;12%e;10%;m,
2349 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
2350 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
2351 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
2352 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
2353 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
2355 # make this easy to change...
2356 scoansi|SCO Extended ANSI standard crt,
2361 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
2362 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
2363 # for the application keypad mode. We have added iris-ansi-ap rather than
2364 # change the original to keypad mode.
2366 # (iris-ansi: added rmam/smam based on init string -- esr)
2368 # This entry, and those derived from it, is used in xwsh (also known as
2369 # winterm). Some capabilities that do not fit into the terminfo model
2370 # include the shift- and control-functionkeys:
2372 # F1-F12 generate different codes when shift or control modifiers are used.
2376 # control-F1 \E[025q
2378 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
2379 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
2381 # The cursor keys also have different codes:
2382 # control-up \E[162q
2383 # control-down \E[165q
2384 # control-left \E[159q
2385 # control-right \E[168q
2388 # shift-down \E[164q
2389 # shift-left \E[158q
2390 # shift-right \E[167q
2392 # control-tab \[072q
2394 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
2396 cols#80, it#8, lines#40,
2397 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
2398 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
2399 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
2400 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
2401 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
2402 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
2403 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2404 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
2405 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
2406 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2407 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
2408 kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
2409 kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
2410 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
2411 kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
2412 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
2413 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
2414 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2415 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
2417 iris-ansi-ap|IRIS ANSI in application-keypad mode,
2418 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
2419 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
2421 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
2422 # (T.Dickey 98/1/24)
2423 iris-color|xwsh|IRIX ANSI with color,
2425 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
2426 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, rmul=\E[24m, rs1=\Ec,
2427 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2428 use=ecma+italics, use=vt100+enq, use=klone+color,
2431 #### OpenBSD consoles
2433 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
2435 # The following terminal descriptions for the AMD/Intel PC console
2436 # were prepared based on information contained in the OpenBSD-4.9
2437 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
2439 # Added bce based on testing with tack -TD
2440 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
2441 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
2443 # Notes from testing with vttest:
2444 # fails wrapping test
2446 # identifies as vt200 with selective erase, but does not implement DECSCA
2449 # ESC # 8 DEC Screen Alignment Test (DECALN).
2450 # CSI ? 5 h Reverse Video (DECSCNM).
2452 pccon+keys|OpenBSD PC keyboard keys,
2453 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2454 kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
2455 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2456 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2457 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
2458 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
2459 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2460 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2462 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
2463 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y
2465 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
2467 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
2468 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2470 enacs=\E)0$<5>, rmacs=\E(B$<5>,
2471 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
2473 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
2474 # underline renders as color
2475 pccon+colors|ANSI colors for OpenBSD PC console,
2477 colors#8, ncv#2, pairs#64,
2478 op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2479 pccon+base|base capabilities for OpenBSD PC console,
2480 am, km, mc5i, msgr, npc, nxon, xenl, xon,
2481 cols#80, it#8, lines#24,
2482 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
2483 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
2484 dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
2485 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2486 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2487 rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h,
2488 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
2490 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
2491 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
2492 pccon0|OpenBSD PC console with simple ASCII pseudographics,
2493 use=pccon0-m, use=pccon+colors,
2494 pccon-m|OpenBSD PC console without colors,
2495 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
2496 pccon|OpenBSD PC console,
2497 use=pccon-m, use=pccon+colors,
2499 #### NetBSD consoles
2501 # pcvt termcap database entries (corresponding to release 3.31)
2502 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
2504 # (For the terminfo master file, I translated these into terminfo syntax.
2505 # Then I dropped all the pseudo-HP entries. we don't want and can't use
2506 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
2507 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
2509 # NOTE: <ich1> has been taken out of this entry. for reference, it should
2510 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
2511 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
2512 pcvtXX|pcvt vt200 emulator (DEC VT220),
2513 am, km, mir, msgr, xenl,
2515 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2517 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2518 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
2519 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2520 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2521 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2522 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2523 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2524 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
2525 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
2526 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2527 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
2528 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
2529 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
2530 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
2531 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
2532 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
2533 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2534 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2535 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2537 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2538 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2539 # 50 lines entries; 80 columns
2540 pcvt25|dec vt220 emulation with 25 lines,
2542 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2543 pcvt28|dec vt220 emulation with 28 lines,
2545 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2546 pcvt35|dec vt220 emulation with 35 lines,
2548 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2549 pcvt40|dec vt220 emulation with 40 lines,
2551 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2552 pcvt43|dec vt220 emulation with 43 lines,
2554 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2555 pcvt50|dec vt220 emulation with 50 lines,
2557 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2559 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2560 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2561 # 50 lines entries; 132 columns
2562 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
2564 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2565 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
2567 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2568 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
2570 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2571 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
2573 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2574 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
2576 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2577 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
2579 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2581 # OpenBSD implements a color variation
2582 pcvt25-color|dec vt220 emulation with 25 lines and color,
2584 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
2585 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2586 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2587 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2588 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
2591 # Terminfo entries to enable the use of the ncurses library in colour on a
2592 # NetBSD-arm32 console (only tested on a RiscPC).
2593 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
2594 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
2595 # typo in invis - TD
2596 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
2597 am, bce, msgr, xenl, xon,
2598 cols#80, it#8, lines#30,
2599 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2600 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2601 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2602 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2603 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2604 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2605 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2606 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
2607 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
2608 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2609 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
2610 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
2611 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
2612 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
2613 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2615 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2616 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
2617 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2618 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
2621 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
2622 cols#132, lines#50, use=arm100,
2624 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
2625 # manufactured by Sharp for the Japanese market.
2626 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
2627 x68k|x68k-ite|NetBSD/x68k ITE,
2629 kclr=\E[9~, khlp=\E[28~, use=vt220,
2632 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
2634 # (still unfinished, but good enough so far.)
2635 ofcons|DNARD OpenFirmware console,
2638 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
2639 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
2640 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
2641 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
2642 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
2643 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
2644 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
2645 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
2646 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
2647 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
2648 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
2649 rmso=\2330m, rmul=\2330m,
2650 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
2651 %;%?%p1%p3%|%t;7%;m,
2652 sgr0=\2330m, smso=\2337m, smul=\2334m,
2654 # NetBSD "wscons" emulator in vt220 mode.
2655 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
2656 # The emulator renders underlined text in red. Colors are otherwise usable.
2658 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
2659 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
2660 # vt220 screens in vttest do not work with this emulator. For instance, it
2661 # identifies itself (primary DA response) as a vt220 with selective erase. But
2662 # the selective erase feature does not work. The secondary response is copied
2663 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
2664 # the level of detail in a termcap, it is a passable emulator, since ECH does
2665 # work. Don't use it on a VMS system -TD
2666 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
2668 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
2669 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
2670 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
2671 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2672 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2673 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
2674 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
2676 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
2679 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
2681 # TERM is by default vt100 for the console, wsvt25 for other ttys.
2682 # Initial testing set TERM=xterm, based on comments by developers, found too
2683 # many differences to continue in that path. However, test-results may be
2684 # useful to people curious about compatibility with xterm.
2686 # Testing with tack:
2688 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
2689 # There is color-bleeding in the color-pairs screen.
2690 # Attributes do not work with color
2692 # Failed: kf1-kf4, kf13-kf48, khome, kend
2693 # (effectively xterm-r6 for function-keys)
2694 # None of the function or cursor key-modifiers are encoded.
2695 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
2697 # Testing with vttest:
2698 # -------------------
2699 # Identifies as vt220 with selective erase
2700 # (however, selective erase refers to DECSCA, SPA)
2701 # Does not implement vt52
2702 # Uses spaces to simulate double-size characters
2703 # Does not support 8-bit controls
2704 # Does not support VT220 reports
2705 # Does not support send/receive mode
2706 # Supports ECH (like rxvt)
2707 # Does not support DECSCA
2708 # Does not support any of the ISO-6429 cursor-movement
2709 # Does not support any of the ISO-6429 miscellaneous tests
2710 # (SL/SR also leave unexpected char on screen too)
2711 # Background does not change in menu 11.6.9 (SGR 22-27)
2712 # None of the xterm special features tests work
2713 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
2716 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
2718 rcons|BSD rasterconsole,
2720 # Color version of above. Color currently only provided by NetBSD.
2721 rcons-color|BSD rasterconsole with ANSI color,
2724 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
2726 # mgterm -- MGL/MGL2, MobileGear Graphic Library
2727 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
2728 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
2729 # -- compare with cons25w
2730 mgterm|MGL/MGL2 MobileGear Graphic Library,
2731 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
2732 colors#8, cols#80, it#8, lines#18, pairs#64,
2733 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2734 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2735 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2736 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2737 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
2738 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2739 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2740 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2741 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2742 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F,
2743 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
2744 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
2745 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
2746 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
2747 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
2748 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2750 #### FreeBSD console entries
2752 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
2753 # Andrey Chernov maintains the FreeBSD termcap distributions.
2755 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
2756 # or comment out the :cb: capability in the console entry.
2758 # Alexander Lukyanov reports:
2759 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
2760 # Now el1 clears not only to the line beginning, but also a large chunk
2761 # of previous line. But there is another bug - ech does not work at all.
2765 # common entry without semigraphics
2766 # Bug: The <op> capability resets attributes.
2767 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
2768 # instance el1 does if the cursor is moved to the right margin first. Removed
2769 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
2771 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
2772 # Note that this disables standout with color.
2774 # The emulator sends difference strings based on shift- and control-keys,
2776 # F13-F24 are shifted F1-F12
2777 # F25-F36 are control F1-F12
2778 # F37-F48 are shift+control F1-F12
2779 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
2780 am, bce, bw, eo, msgr, npc,
2781 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
2782 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2783 cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
2784 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2785 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2786 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
2787 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2788 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2789 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2790 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2791 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F,
2792 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2793 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2794 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2795 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2796 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2797 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2798 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2799 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2800 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2801 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2802 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2803 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2804 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2805 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
2807 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2808 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2809 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
2810 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
2813 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2814 kbs=^?, kdch1=\E[3~, use=cons25,
2815 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2817 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2818 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2819 smul=\E[4m, use=cons25,
2820 cons30|ansi80x30|freebsd console (30-line ansi mode),
2821 lines#30, use=cons25,
2822 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2823 lines#30, use=cons25-m,
2824 cons43|ansi80x43|freebsd console (43-line ansi mode),
2825 lines#43, use=cons25,
2826 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2827 lines#43, use=cons25-m,
2828 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2829 lines#50, use=cons25,
2830 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2831 lines#50, use=cons25-m,
2832 cons60|ansi80x60|freebsd console (60-line ansi mode),
2833 lines#60, use=cons25,
2834 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2835 lines#60, use=cons25-m,
2836 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2837 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
2838 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
2841 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2843 op@, rmul=\E[m, setab@, setaf@,
2844 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2845 %t;30;1%;%?%p6%t;1%;m,
2846 smul=\E[4m, use=cons25r,
2847 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2848 lines#50, use=cons25r,
2849 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2850 lines#50, use=cons25r-m,
2851 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2852 lines#60, use=cons25r,
2853 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2854 lines#60, use=cons25r-m,
2855 # ISO 8859-1 FreeBSD console
2856 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2857 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2858 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2859 \226v\227w\230x\231y\232z\233~\237,
2861 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2863 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2864 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2865 smul=\E[4m, use=cons25l1,
2866 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2867 lines#50, use=cons25l1,
2868 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2869 lines#50, use=cons25l1-m,
2870 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2871 lines#60, use=cons25l1,
2872 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2873 lines#60, use=cons25l1-m,
2875 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2876 # which is intended to be xterm-compatible. See for example
2877 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2878 # in particular scterm-teken.c
2880 # For FreeBSD 9 and 10:
2881 # --------------------
2882 # The /etc/ttys entries for console and other ttys are all configured to set
2885 # Testing with tack:
2886 # There is no VT100 line-drawing (uses +'s and -'s)
2887 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2889 # Testing with vttest:
2890 # Menu 2 diamonds don't work, blink ditto, light background ditto
2891 # The terminal identifies itself as VT100 with AVO
2892 # There is no VT52 support
2893 # There is no doublesize character support
2894 # The terminal supports ECH (like rxvt)
2895 # The terminal does not support send/receive mode
2896 # The terminal supports all of the ISO-6429 cursor-movement
2897 # The terminal supports some of the ISO-6429 miscellaneous tests
2898 # (SL/SR also leave unexpected char on screen too)
2900 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2901 # the cells which happen to have ASCII control-character values:
2902 # - ^X arrow pointing up
2903 # . ^Y arrow pointing down
2907 # Those are removed from this entry's acsc string to avoid confusion.
2908 # The resulting description provides correct line-drawing and function-keys -TD
2909 teken|syscons with teken,
2911 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2912 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2913 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2914 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2915 kdch1=\E[3~, kend=\E[F, kent=\r, kf1=\EOP, kf10=\E[21~,
2916 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2917 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2918 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2919 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2920 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2922 #### 386BSD and BSD/OS Consoles
2925 # This was the original 386BSD console entry (I think).
2926 # Some places it's named oldpc3|oldibmpc3.
2927 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2928 origpc3|origibmpc3|IBM PC 386BSD Console,
2929 OTbs, am, bw, eo, xon,
2931 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2933 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2934 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2935 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2936 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2937 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2938 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2940 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2941 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2944 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
2945 ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2946 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2947 knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
2949 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2950 # Note, the emulator supports many of the additional console features
2951 # listed in the iBCS2 (e.g. character-set selection) though not all
2952 # are described here. This entry really ought to be upgraded.
2953 # Also note, the console will also work with fewer lines after doing
2954 # "stty rows NN", e.g. to use 24 lines.
2955 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2956 # Bug: The <op> capability resets attributes.
2957 bsdos-pc|IBM PC BSD/OS Console,
2958 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2959 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2960 use=bsdos-pc-nobold,
2962 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2963 use=klone+color, use=bsdos-pc-m,
2965 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2966 OTbs, am, eo, km, xon,
2967 cols#80, it#8, lines#25,
2968 bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
2969 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2970 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2971 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2972 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
2973 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2974 kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
2975 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2976 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2979 # Old names for BSD/OS PC console used in releases before 4.1.
2980 pc3|BSD/OS on the PC Console,
2981 use=bsdos-pc-nobold,
2982 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2985 # BSD/OS on the SPARC
2986 bsdos-sparc|Sun SPARC BSD/OS Console,
2989 # BSD/OS on the PowerPC
2990 bsdos-ppc|PowerPC BSD/OS Console,
2995 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2997 # Actually (TD pointed this out at the time the acsc string was added):
2998 # vt52 shouldn't define full acsc since most of the cells don't match.
2999 # see vt100 manual page A-31. This is the list that does match:
3008 # The line-drawing happens to work in several terminal emulators, but should
3009 # not be used as a guide to the capabilities of the vt52. Note in particular
3010 # that vt52 does not support line-drawing characters (the scan-X values refer
3011 # to a crude plotting feature) -TD
3014 cols#80, it#8, lines#24,
3015 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=\r,
3016 cub1=\ED, cud1=\EB, cuf1=\EC,
3017 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
3018 el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
3019 kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
3021 #### DEC VT100 and compatibles
3023 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
3024 # and micro consoles can be found in the `obsolete' section. More details on
3025 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
3026 # found near the end of this file.
3028 # Except where noted, these entries are DEC's official terminfos.
3029 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
3030 # Engineering for more information. Updated terminfos and termcaps
3031 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
3033 # In October 1995 DEC sold its terminals business, including the VT and Dorio
3034 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
3035 # its name to Boundless Technologies; see http://www.boundless.com.
3038 # NOTE: Any VT100 emulation, whether in hardware or software, almost
3039 # certainly includes what DEC called the `Level 1 editing extension' codes;
3040 # only the very oldest VT100s lacked these and there probably aren't any of
3041 # those left alive. To capture these, use one of the VT102 entries.
3043 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
3044 # since the cursor is left in a different position while in the
3045 # weird state (concept at beginning of next line, vt100 at end
3046 # of this line) so all versions of vi before 3.7 don't handle
3047 # <xenl> right on vt100. The correct way to handle <xenl> is when
3048 # you output the char in column 80, immediately output CR LF
3049 # and then assume you are in column 1 of the next line. If <xenl>
3050 # is on, am should be on too.
3052 # I assume you have smooth scroll off or are at a slow enough baud
3053 # rate that it doesn't matter (1200? or less). Also this assumes
3054 # that you set auto-nl to "on", if you set it off use vt100-nam
3057 # The padding requirements listed here are guesses. It is strongly
3058 # recommended that xon/xoff be enabled, as this is assumed here.
3060 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
3061 # tab settings are in non-volatile memory and don't need to be
3062 # reset upon login. Also setting the number of columns glitches
3063 # the screen annoyingly. You can type "reset" to get them set.
3065 # The VT100 series terminals have cursor ("arrows") keys which can operate
3066 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
3067 # is the reset state, and is assumed to be the normal state. Application
3068 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
3069 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
3070 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
3071 # was provided primarily as an aid to the porting of VT52 applications. It is
3072 # assumed that the cursor keys are normally in Cursor Mode, and expected that
3073 # applications such as vi will always transmit the <smkx> string. Therefore,
3074 # the definitions for the cursor keys are made to match what the terminal
3075 # transmits after the <smkx> string is transmitted. If the <smkx> string
3076 # is a null string or is not defined, then cursor keys are assumed to be in
3077 # "Cursor Mode", and the cursor keys definitions should match that assumption,
3078 # else the application may fail. It is also expected that applications will
3079 # always transmit the <rmkx> string to the terminal before they exit.
3081 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
3082 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
3083 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
3084 # Application Mode. Numeric Mode is the reset state, and is assumed to be
3085 # the normal state. Application Mode is the "set" state. In Numeric Mode,
3086 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
3087 # Enter key transmits the same as the Return key (Note: the Return key
3088 # can be configured to send either LF (\015) or CR LF). In Application Mode,
3089 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
3090 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
3091 # is normally in Numeric Mode. If an application requires that the keypad be
3092 # in Application Mode then it is expected that the user, or the application,
3093 # will set the TERM environment variable to point to a terminfo entry which has
3094 # defined the <smkx> string to include the codes that switch the keypad into
3095 # Application Mode, and the terminfo entry will also define function key
3096 # fields to match the Application Mode control codes. If the <smkx> string
3097 # is a null string or is not defined, then the keypad is assumed to be in
3098 # Numeric Mode. If the <smkx> string switches the keypad into Application
3099 # Mode, it is expected that the <rmkx> string will contain the control codes
3100 # necessary to reset the keypad to "Normal" mode, and it is also expected that
3101 # applications which transmit the <smkx> string will also always transmit the
3102 # <rmkx> string to the terminal before they exit.
3104 # Here's a diagram of the VT100 keypad keys with their bindings.
3105 # The top line is the name of the key (some DEC keyboards have the keys
3106 # labelled somewhat differently, like GOLD instead of PF1, but this is
3107 # the most "official" name). The second line is the escape sequence it
3108 # generates in Application Keypad mode (where "$" means the ESC
3109 # character). The third line contains two items, first the mapping of
3110 # the key in terminfo, and then in termcap.
3111 # _______________________________________
3112 # | PF1 | PF2 | PF3 | PF4 |
3113 # | $OP | $OQ | $OR | $OS |
3114 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
3116 # | $Ow | $Ox | $Oy | $Om |
3117 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
3119 # | $Ot | $Ou | $Ov | $Ol |
3120 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
3122 # | $Oq | $Or | $Os | enter |
3123 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
3126 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
3128 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
3129 # terminfo guidelines. That is a compromise used to assign the remaining
3130 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
3132 vt100+keypad|dec vt100 numeric keypad no fkeys,
3133 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
3134 vt100+pfkeys|dec vt100 numeric keypad,
3135 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3137 vt100+fnkeys|dec vt100 numeric keypad,
3138 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
3139 kf9=\EOw, use=vt100+pfkeys,
3141 # A better adaptation to modern keyboards such as the PC's, which have a dozen
3142 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
3143 # use the 5-key arrangement to model the arrow keys as suggested in the
3144 # terminfo guidelines:
3145 # _______________________________________
3146 # | PF1 | PF2 | PF3 | PF4 |
3147 # | $OP | $OQ | $OR | $OS |
3148 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
3150 # | $Ow | $Ox | $Oy | $Om |
3151 # |_ka1__K1_|_________|_ka3__K3_|_________|
3153 # | $Ot | $Ou | $Ov | $Ol |
3154 # |_________|_kb2__K2_|_________|_________|
3156 # | $Oq | $Or | $Os | enter |
3157 # |_kc1__K4_|_________|_kc3__K5_| $OM |
3160 # |___________________|_________|_kent_@8_|
3162 vt220+keypad|dec vt220 numeric keypad,
3163 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
3164 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
3167 vt100+enq|ncurses extension for vt100-style ENQ,
3168 u8=\E[?1;2c, use=ansi+enq,
3169 vt102+enq|ncurses extension for vt102-style ENQ,
3170 u8=\E[?6c, use=ansi+enq,
3172 # And here, for those of you with orphaned VT100s lacking documentation, is
3173 # a description of the soft switches invoked when you do `Set Up'.
3175 # Scroll 0-Jump Shifted 3 0-#
3176 # | 1-Smooth | 1-British pound sign
3177 # | Autorepeat 0-Off | Wrap Around 0-Off
3179 # | | Screen 0-Dark Bkg | | New Line 0-Off
3180 # | | | 1-Light Bkg | | | 1-On
3181 # | | | Cursor 0-Underline | | | Interlace 0-Off
3182 # | | | | 1-Block | | | | 1-On
3184 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
3186 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
3187 # | | | 1-On | | | 1-50 Hz
3188 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
3189 # | | 1-ANSI | | 1-8 Bits
3190 # | Keyclick 0-Off | Parity 0-Off
3192 # Margin Bell 0-Off Parity Sense 0-Odd
3195 # The following SET-UP modes are assumed for normal operation:
3196 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
3197 # WRAP_AROUND_ON JUMP_SCROLL_OFF
3198 # Other SET-UP modes may be set for operator convenience or communication
3199 # requirements; I recommend
3200 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
3201 # Unless you have a graphics add-on such as Digital Engineering's VT640
3202 # (and even then, whenever it can be arranged!) you should set
3205 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
3206 vt100|vt100-am|dec vt100 (w/advanced video),
3207 OTbs, mc5i, xenl, xon,
3209 csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
3210 kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3211 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
3212 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
3214 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3215 %;m%?%p9%t\016%e\017%;$<2>,
3216 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
3217 use=vt100+4bsd, use=vt100+fnkeys,
3218 vt100+4bsd|dec vt100 from 4.0BSD,
3220 cols#80, it#8, lines#24,
3221 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3222 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
3223 clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
3224 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
3225 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
3226 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
3227 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
3228 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3229 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
3230 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3231 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3232 %;m%?%p9%t\016%e\017%;$<2>,
3233 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
3234 smul=\E[4m$<2>, tbc=\E[3g,
3235 vt100nam|vt100-nam|vt100 no automargins,
3237 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
3238 vt100-vb|dec vt100 (w/advanced video) & no beep,
3239 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
3241 # Ordinary vt100 in 132 column ("wide") mode.
3242 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
3244 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
3245 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
3246 cols#132, lines#14, vt@,
3247 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
3249 # vt100 with no advanced video.
3250 vt100-nav|vt100 without advanced video option,
3252 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
3254 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
3255 cols#132, lines#14, use=vt100-nav,
3257 # vt100 with one of the 24 lines used as a status line.
3258 # We put the status line on the top.
3259 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
3262 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
3263 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
3264 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
3265 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
3267 # Status line at bottom.
3268 # Clearing the screen will clobber status line.
3269 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
3272 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
3273 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
3275 # Most of the `vt100' emulators out there actually emulate a vt102
3276 # This entry (or vt102-nsgr) is probably the right thing to use for
3279 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
3281 vt102-w|dec vt102 in wide mode,
3283 rs3=\E[?3h, use=vt102,
3285 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
3286 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
3287 # string in the canonical vt100 entry above leaves the screen littered
3288 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
3289 # after highlight turnoffs. This entry should fix that, and even leave
3290 # ACS support working, at the cost of making multiple-highlight changes
3291 # slightly more expensive.
3292 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
3293 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
3294 sgr@, sgr0=\E[m, use=vt102,
3296 # VT125 Graphics CRT. Clear screen also erases graphics
3297 # Some vt125's came configured with vt102 support.
3298 vt125|vt125 graphics terminal,
3300 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
3302 # This isn't a DEC entry, it came from University of Wisconsin.
3303 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
3306 cols#80, it#8, lines#24, vt#3,
3307 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
3308 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3309 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
3310 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
3311 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
3312 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
3313 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
3314 kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
3315 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
3317 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3318 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
3319 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3321 # vt132 - like vt100 but slower and has ins/del line and such.
3322 # I'm told that <smir>/<rmir> are backwards in the terminal from the
3323 # manual and from the ANSI standard, this describes the actual
3324 # terminal. I've never actually used a vt132 myself, so this
3329 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
3330 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
3332 # This vt220 description maps F5--F9 to the second block of function keys
3333 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
3334 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
3335 # PF1--PF4 are used as F1--F4.
3338 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
3339 OTbs, OTpt, am, mir, msgr, xenl, xon,
3340 cols#80, lines#24, vt#3,
3342 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3343 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3344 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
3345 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
3346 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
3347 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
3348 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
3349 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3350 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
3351 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
3352 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
3353 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
3354 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
3355 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
3356 rmso=\E[27m, rmul=\E[24m,
3357 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3358 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3359 %p9%t\E(0%e\E(B%;$<2>,
3360 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3361 smso=\E[7m, smul=\E[4m,
3363 # A much better description of the VT200/220; used to be vt220-8
3364 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
3365 # designation to accommodate bug in pcvt -TD
3367 # Here's a picture of the VT220 editing keypad:
3368 # +--------+--------+--------+
3369 # | Find | Insert | Remove |
3370 # +--------+--------+--------+
3371 # | Select | Prev | Next |
3372 # +--------+--------+--------+
3373 vt220|vt200|dec vt220,
3374 OTbs, am, mir, msgr, xenl, xon,
3375 cols#80, it#8, lines#24, vt#3,
3376 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3377 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3378 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3379 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3380 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3381 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3382 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3383 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3384 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3385 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3386 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
3387 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
3388 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3389 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3390 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3391 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
3392 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3393 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3394 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
3395 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
3397 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3398 %p9%t\E(0%e\E(B%;$<2>,
3399 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3400 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
3402 vt220-w|vt200-w|DEC vt220 in wide mode,
3404 rs3=\E[?3h, use=vt220,
3405 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
3406 OTbs, am, mc5i, mir, msgr, xenl, xon,
3407 cols#80, it#8, lines#24, vt#3,
3408 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3409 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
3410 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
3411 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
3412 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
3413 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3414 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
3415 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
3416 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
3417 il=\233%p1%dL, il1=\233L, ind=\ED,
3418 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
3419 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
3420 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
3421 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
3422 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
3423 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3424 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
3425 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
3426 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
3427 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
3428 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
3429 rmul=\23324m, rs1=\233?3l, sc=\E7,
3430 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
3431 %?%p9%t\E(0%e\E(B%;$<2>,
3432 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
3433 smso=\2337m, smul=\2334m, tbc=\2333g,
3436 # This vt220 description regards F6--F10 as the second block of function keys
3437 # at the top of the keyboard. This mapping follows the description given
3438 # in the VT220 Programmer Reference Manual and agrees with the labeling
3439 # on some terminals that emulate the vt220. There is no support for an F5.
3440 # See vt220 for an alternate mapping.
3442 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
3443 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3444 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3445 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
3446 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
3448 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
3450 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3452 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
3453 # (not an official DEC entry!)
3454 # The problem with real vt220 terminals is they don't send escapes when in
3455 # in vt220 mode. This can be gotten around two ways. 1> don't send
3456 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
3457 # features of vt100 advanced video which it then has.
3459 # This entry takes the view of putting a vt220 into vt100 mode so
3460 # you can use the escape key in emacs and everything else which needs it.
3462 # You probably don't want to use this on a VMS machine since VMS will think
3463 # it has a vt220 and will get fouled up coming out of emacs
3465 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
3466 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
3468 vt200-js|vt220-js|dec vt200 series with jump scroll,
3471 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3472 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3473 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
3474 ht=^I, il1=\E[L, ind=\ED,
3475 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
3477 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3478 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
3479 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
3480 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
3481 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
3482 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
3484 # This was DEC's vt320. Use the purpose-built one below instead
3485 #vt320|DEC VT320 in vt100 emulation mode,
3488 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
3490 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
3492 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3494 # These entries are not DEC's official ones, they were purpose-built for the
3495 # VT320. Here are the designer's notes:
3496 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
3497 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
3498 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
3499 # Things that use <knxt> usually use tab anyways... and things that don't use
3500 # tab usually use <knxt> instead...
3501 # kprv is same as tab - Backtab is useless...
3502 # I left out <sgr> because of its RIDICULOUS complexity,
3503 # and the resulting fact that it causes the termcap translation of the entry
3504 # to SMASH the 1k-barrier...
3505 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3506 # (vt320: uncommented <fsl> --esr)
3507 vt320|vt300|dec vt320 7 bit terminal,
3508 am, hs, mir, msgr, xenl,
3509 cols#80, lines#24, wsl#80,
3510 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3511 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3512 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
3513 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3514 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3515 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3516 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3517 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
3518 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
3519 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3520 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3521 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
3522 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3523 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3524 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3525 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
3526 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
3527 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3528 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3530 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3532 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3533 %p9%t\E(0%e\E(B%;$<2>,
3534 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3535 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3536 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
3537 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
3539 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3540 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
3541 # We have to init 132-col mode, not 80-col mode.
3542 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
3544 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3545 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
3546 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
3548 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3549 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
3551 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
3552 # which are pretty much a superset of the VT320. They have the
3553 # host writable status line, yet another different DRCS matrix size,
3554 # and such, but they add the DEC Technical character set, Multiple text
3555 # pages, selectable length pages, and the like. The difference between
3556 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
3557 # monitor, the former has 4 planes and a color monitor. These terminals
3558 # support VT131 and ANSI block mode, but as with much of these things,
3559 # termcap/terminfo doesn't deal with these features.
3561 # Note that this entry is are set up in what was the standard way for GNU
3562 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3563 # keys were switched into application mode at the same time the numeric pad
3564 # is switched into application mode. This changes the definitions of the
3565 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3566 # your termcap or terminfo entry,
3568 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3569 # (vt340: string capability "sb=\E[M" corrected to "sr";
3570 # also, added <rmam>/<smam> based on the init string -- esr)
3571 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
3572 am, eslok, hs, mir, msgr, xenl, xon,
3573 cols#80, it#8, lines#24, vt#3,
3574 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3575 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3576 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3577 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
3578 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3579 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
3580 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
3581 ed=\E[J, el=\E[K, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
3582 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
3584 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3586 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3587 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3588 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3589 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
3590 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3591 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3592 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
3593 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3594 %p9%t\E(0%e\E(B%;$<2>,
3595 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3596 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3597 tsl=\E[2$~\E[1$}\E[1;%dH,
3599 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
3600 # (originally written with vt420 as its primary name, and usable for it).
3602 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
3603 # text pages and long text pages with selectable length of the vt340, along
3604 # with left and right margins, rectangular area text copy, fill, and erase
3605 # operations, selected region character attribute change operations,
3606 # page memory and rectangle checksums, insert/delete column, reception
3607 # macros, and other features too numerous to remember right now. TERMCAP
3608 # can only take advantage of a few of these added features.
3610 # Note that this entry is are set up in what was the standard way for GNU
3611 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3612 # keys were switched into application mode at the same time the numeric pad
3613 # is switched into application mode. This changes the definitions of the
3614 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3615 # your termcap entry,
3617 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3618 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
3619 # also, added <rmam>/<smam> based on the init string -- esr)
3620 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
3621 am, eslok, hs, mir, msgr, xenl, xon,
3622 cols#80, it#8, lines#24, vt#3,
3623 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3624 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3625 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=\r,
3626 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3627 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3628 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3629 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3630 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
3631 el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
3632 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3633 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3634 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3636 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3637 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3638 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3639 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
3640 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3641 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3642 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
3643 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3644 %p9%t\E(0%e\E(B%;$<2>,
3645 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3646 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3647 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
3649 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
3650 # a missing <sc> -- esr)
3651 # add msgr and other capabilities from vt220 -TD
3653 am, mir, msgr, xenl, xon,
3654 cols#80, it#8, lines#24, vt#3,
3655 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3656 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3657 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
3658 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3659 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3660 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
3661 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3662 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
3663 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
3664 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3665 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3666 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3667 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
3668 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
3669 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
3670 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
3671 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
3672 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3673 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3674 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3675 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3676 %p9%t\E(0%e\E(B%;$<2>,
3677 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3678 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3679 use=ansi+pp, use=dec+sl, use=ansi+enq,
3681 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3682 # takes two parameters, the key and the string. Translating the key is
3683 # straightforward (keys 1-5 are not defined on real terminals, though some
3684 # emulators define these):
3686 # if (key < 16) then value = key;
3687 # else if (key < 21) then value = key + 1;
3688 # else if (key < 25) then value = key + 2;
3689 # else if (key < 27) then value = key + 3;
3690 # else if (key < 30) then value = key + 4;
3691 # else value = key + 5;
3693 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3694 # There's no provision in terminfo for emitting a string in this format, so the
3695 # application has to know it.
3697 vt420pc|DEC VT420 w/PC keyboard,
3698 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3699 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3700 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
3701 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
3702 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
3703 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
3704 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
3705 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
3706 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
3707 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
3708 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
3709 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
3710 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3711 pctrm=USR_TERM\:vt420pcdos\:,
3712 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
3713 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
3717 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3719 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
3720 %{127}%=%t\E\177%e%p1%c%;,
3722 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3723 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3725 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3726 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3727 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3728 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3729 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3730 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3731 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3736 vt510pc|DEC VT510 w/PC keyboard,
3738 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3743 # The VT520 is a monochrome text terminal capable of managing up to
3744 # four independent sessions in the terminal. It has multiple ANSI
3745 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3746 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3747 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3749 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3750 # [Alt]/[Print Screen] depending upon which keyboard and which
3751 # terminal mode is being used. If Set-Up has been disabled or
3752 # assigned to an unknown key, Set-Up may be entered by pressing
3753 # [F3] as the first key after power up, regardless of keyboard type.
3755 use=ansi+rca, use=vt420, use=ansi+tabs,
3760 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3761 # Keyboard, which replaces the old LK41R-AA keyboard.
3763 # In trying to get the function keys to work, I had to cobble my own
3764 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3765 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3766 # I seem to get them all -Mike Gran
3767 vt520ansi|Boundless VT520 ANSI,
3768 use=ansi+rca, use=vt420f, use=vt220+keypad,
3771 #### VT100 emulations
3774 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3775 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3776 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3777 # that this works best with a stock vt100 entry.
3778 dec-vt100|EWAN telnet's vt100 emulation,
3781 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3782 dec-vt220|DOS tnvt200 terminal emulator,
3785 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3786 # anyone who needs PC VT340 emulation. (or anything below that level, for
3787 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3788 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
3789 # I can send the address if requested.
3790 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3791 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3792 z340|zstem vt340 terminal emulator 132col 42line,
3794 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3795 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
3796 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
3798 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3799 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
3801 # CRT is shareware. It implements some xterm features, including mouse.
3802 crt|crt-vt220|CRT 2.3 emulating VT220,
3805 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3807 # PuTTY 0.55 (released 3 August 2004)
3808 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3810 # Comparing with 0.51, vttest is much better (only a few problems with the
3811 # cursor position reports and wrapping).
3813 # PuTTY 0.51 (released 14 December 2000)
3815 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3816 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3817 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3818 # to xterm, which is incorrect, since several features are misimplemented:
3820 # Alt+key always sends ESC+key, so 'km' capability is removed.
3822 # Control responses, wrapping and tabs are buggy, failing a couple of
3823 # screens in vttest.
3825 # xterm mouse support is not implemented (unrelease version may).
3827 # Several features such as backspace/delete are optional; this entry documents
3828 # the default behavior -TD
3830 # PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
3831 # but implements it incorrectly as mentioned here:
3832 # http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114
3833 putty|PuTTY terminal emulator,
3834 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3835 colors#8, it#8, ncv#22, pairs#64, U8#1,
3836 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3837 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3838 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
3839 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3840 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3841 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3842 dch=\E[%p1%dP, dch1=\E[P,
3843 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
3844 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
3845 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
3846 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
3847 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
3848 %%G\340\202\242\E%%@%e%p1%c%;,
3849 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3850 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
3851 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL,
3852 il1=\E[L, ind=\n, indn=\E[%p1%dS,
3853 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
3854 %02x%p4%{255}%*%{1000}%/%02x,
3855 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3856 kLFT=\E[D, kRIT=\E[C, kb2=\E[G, kbs=^?, kcbt=\E[Z,
3857 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3858 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
3859 kind=\E[B, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[A,
3860 kspd=^Z, nel=\r\n, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
3861 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
3862 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmkx=\E[?1l\E>,
3863 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
3864 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3865 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3866 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3867 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3868 %;m%?%p9%t\016%e\017%;,
3869 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3870 smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
3871 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J,
3872 use=putty+fnkeys, use=vt102+enq, use=xterm+sl,
3873 vt100-putty|Reset PuTTY to pure vt100,
3874 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3876 putty-256color|PuTTY 0.58 with xterm 256-colors,
3877 use=xterm+256setaf, use=putty,
3878 putty-noapp|putty with cursor keys in normal mode,
3879 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3880 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
3883 # One of the keyboard selections is "VT100+".
3884 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3885 putty-vt100|VT100+ keyboard layout,
3886 use=putty+fnkeys+vt100, use=putty,
3888 putty-sco|putty with SCO function keys,
3889 use=putty+fnkeys+sco, use=putty,
3891 # PuTTY has more than one section in its Keyboard configuration:
3892 # a) backspace/delete, which we ignore since that choice largely depends on
3893 # whether one matches Unix and BSD or Linux.
3894 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
3895 # are unrelated to rxvt's actual settings.
3896 # c) function keys and keypad - this is the interesting part. None of the
3897 # selections match any of their respective namesakes, but they are shown
3898 # here to help users who expect that the selections do what is implied.
3900 # This is the default setting for PuTTY
3901 putty+fnkeys|fn-keys for PuTTY,
3902 use=putty+fnkeys+esc,
3904 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
3905 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3906 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3907 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3908 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3909 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3911 putty+fnkeys+linux|Linux fn-keys for PuTTY,
3912 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3913 use=putty+fnkeys+esc,
3915 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
3916 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3917 use=putty+fnkeys+esc,
3919 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
3920 use=putty+fnkeys+esc,
3922 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
3924 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
3925 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3926 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3927 kf9=\EOX, use=putty+fnkeys+esc,
3929 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3931 # Use modifiers to obtain function keys past 12:
3934 # F25-F36 - control/alt
3935 # F37-F48 - control/shift
3937 putty+fnkeys+sco|SCO fn-keys for PuTTY,
3938 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3939 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3940 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3941 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3942 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3943 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3944 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3945 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3946 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3947 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3948 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3949 kich1=\E[L, knp=\E[G, kpp=\E[I,
3951 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3952 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3953 # (communication program) which supports:
3955 # - Serial port connections.
3956 # - TCP/IP (telnet) connections.
3957 # - VT100 emulation, and selected VT200/300 emulation.
3958 # - TEK4010 emulation.
3959 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3961 # - Scripts using the "Tera Term Language".
3962 # - Japanese and Russian character sets.
3964 # The program does not come with terminfo or termcap entries. However, the
3965 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3966 # vt52 or doublesize character support; blinking is done with color). Besides
3967 # the HPA, VPA extensions it also implements CPL and CNL.
3969 # All of the function keys can be remapped. This description shows the default
3970 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3971 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3972 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3980 # ANSI colors are implemented, but cannot be combined with video attributes
3981 # except for reverse.
3983 # No fonts are supplied with the program, so the acsc string is chosen to
3984 # correspond with the default Microsoft terminal font.
3986 # Tera Term recognizes some xterm sequences, including those for setting and
3987 # retrieving the window title, and for setting the window size (i.e., using
3988 # "resize -s"), though it does not pass SIGWINCH to the application if the
3989 # user resizes the window with the mouse.
3990 teraterm2.3|Tera Term Pro,
3993 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
3994 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
3995 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3996 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3997 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3998 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3999 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
4000 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
4001 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
4002 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4003 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4004 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4005 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4006 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4007 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
4008 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
4009 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
4010 use=klone+color, use=vt100,
4012 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
4013 # to choose a Windows OEM font).
4015 # Testing with tack:
4016 # - it does not have xenl (suppress that)
4017 # - underline seems to work with color (modify ncv).
4018 # Testing with vttest:
4019 # - wrapping differs from vt100 (menu 1).
4020 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
4022 # - it recognizes the dtterm window controls for reporting size in
4023 # characters and pixels.
4024 # - it passes SIGWINCH.
4025 teraterm4.59|Tera Term Pro,
4028 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4029 kmous=\E[M, use=teraterm2.3,
4033 # Testing with tack:
4034 # - no bell (flash works)
4035 # - bold is yellow, blink is red.
4036 # - default keyboard sends ^? for Delete, can be configured for kdch1
4038 # Testing with vttest:
4039 # + autowrap has problems...
4040 # + color-tests for bce feature match xterm's behavior
4041 # + handles most of xterm's mouse-controls other than highlight-tracking.
4042 # xterm's SGR 1006 works.
4043 # + partial support for DEC locator-events
4044 # + implements ECMA-48 SD/SU, but not REP, SL/SR.
4045 # + has a "Tek" window, but does not work with vttest's examples
4046 # + supports the dtterm window modify/report controls
4047 # + responds to DECRQM and DECRQSS controls, but not consistent with DSR
4049 # + VT220 screen-display tests are ok
4052 # + recognizes xterm's original direct-colors sequences, but result is
4054 # + no UTF-8 apparent when UTF-8 is set, with font Lucida Control
4055 teraterm4.97|Tera Term Pro,
4056 XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59,
4057 teraterm-256color|TeraTerm with xterm 256-colors,
4058 use=xterm+256setaf, use=teraterm,
4063 # Tested with WinNT 4.0, the telnet application assumes the screensize is
4064 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
4067 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
4068 # for casual (occasional) use. Also fails several of the vttest screens,
4069 # but that is not unusual for vt100 "emulators".
4070 # b) Does not implement vt100 keypad
4071 # c) Recognizes a subset of vt52 controls.
4072 ms-vt100|MS telnet imitating dec vt100,
4074 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4075 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4076 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4077 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
4078 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
4080 # Tested with Windows 2000, the telnet application runs in a console window,
4081 # also using 'Terminal' font.
4084 # a) This version has no function keys or numeric keypad. Unlike the older
4085 # version, the numeric keypad is entirely ignored.
4086 # b) The program sets $TERM to "ansi", which of course is inaccurate.
4087 ms-vt100-color|vtnt|windows 2000 ansi (sic),
4089 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
4092 # Based on comments from Federico Bianchi:
4094 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
4095 # scheme for PF keys.
4097 # and PuTTY wishlist:
4099 # The modifiers are represented as the codes listed above, prefixed to
4100 # the normal sequences. If the modifier is pressed alone, its sequence
4101 # is transmitted twice in succession. If multiple modifiers apply,
4102 # they're transmitted in the order shift, control, alt.
4107 ms-vt100+|vt100+|windows XP vt100+ (sic),
4108 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
4109 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
4110 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
4111 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
4112 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
4113 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
4114 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
4115 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
4116 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
4117 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
4118 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
4119 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
4120 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
4121 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
4122 knp=\E/, kpp=\E?, use=ms-vt100-color,
4124 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
4127 # expect-5.44.1.15/example/tkterm
4128 # a minimal subset of a vt100 (compare with "news-unk).
4130 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
4131 tt|tkterm|Don Libes' tk text widget terminal emulator,
4132 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
4133 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
4134 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
4135 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
4138 ######## X TERMINAL EMULATORS
4141 # You can add the following line to your .Xdefaults to change the terminal type
4142 # set by the xterms you start up to my-xterm:
4144 # *termName: my-xterm
4146 # System administrators can change the default entry for xterm instances
4147 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
4148 # case, xterm will detect and reject an invalid terminal type, falling back
4149 # to the default of xterm.
4152 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
4153 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
4154 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
4155 # as these seem not to work -- esr)
4156 x10term|vs100-x10|xterm terminal emulator (X10 window system),
4157 OTbs, am, km, mir, msgr, xenl, xon,
4158 cols#80, it#8, lines#65,
4159 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
4160 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4161 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4162 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
4163 il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
4164 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4165 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
4166 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4167 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
4168 smso=\E[7m, smul=\E[4m,
4169 # Compatible with the R5 xterm
4170 # (from the XFree86 3.2 distribution, <blink=@> removed)
4171 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
4172 # corrected typos in rs2 string - TD
4174 xterm-r5|xterm R5 version,
4175 OTbs, am, km, msgr, xenl,
4176 cols#80, it#8, lines#24,
4177 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4178 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4179 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4180 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4181 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4182 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4183 il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB,
4184 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[31~,
4185 kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~,
4186 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
4187 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
4188 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kil1=\E[30~,
4189 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
4190 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4191 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
4193 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
4195 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
4196 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=xterm+kbs,
4197 # Compatible with the R6 xterm
4198 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
4199 # added khome/kend, hts based on the R6 xterm code - TD
4200 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
4201 # for compatibility with other emulators).
4202 xterm-r6|xterm X11R6 version,
4203 OTbs, am, km, mir, msgr, xenl,
4204 cols#80, it#8, lines#24,
4205 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4206 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4207 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4208 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4209 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4210 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4211 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
4213 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
4214 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4215 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4216 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4217 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4218 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4219 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4220 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4221 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
4222 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
4223 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4224 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
4225 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4226 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4227 use=xterm+kbs, use=vt100+enq,
4228 xterm-old|antique xterm version,
4230 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
4231 # The name has been changed and some aliases have been removed.
4232 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
4233 OTbs, am, bce, km, mir, msgr, xenl, XT,
4234 cols#80, it#8, lines#24, ncv@,
4235 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4236 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4237 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
4238 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4239 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4240 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4241 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4242 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4243 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
4244 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
4246 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4247 kbeg=\EOE, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4248 kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4249 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4250 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4251 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4252 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4253 kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
4254 kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m,
4255 ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8,
4256 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
4257 rs1=^O, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>,
4259 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4261 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4263 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4264 %;m%?%p9%t\016%e\017%;,
4265 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4266 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4267 tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs, use=vt100+enq,
4268 use=ecma+color, use=vt220+keypad,
4270 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
4271 # codes for F1-F4 except while in VT220 mode.
4272 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
4273 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
4275 # This version was released in XFree86 3.3.3 (November 1998).
4276 # Besides providing printer support, it exploits a new feature that allows
4277 # xterm to use terminfo-based descriptions with the titeInhibit resource.
4278 # -- the distribution contained incorrect khome/kend values -TD
4279 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
4280 blink=\E[5m, ich1@, invis=\E[8m,
4281 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
4282 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
4283 rs2=\E[!p\E[?3;4l\E[4l\E>,
4284 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4285 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4286 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
4289 # This version was released in XFree86 4.0.
4290 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
4292 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
4293 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
4294 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
4295 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4296 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
4297 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4298 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4299 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
4300 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
4301 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
4302 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
4303 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
4304 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
4305 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
4306 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
4308 smcup=\E[?1049h, use=xterm-xf86-v333,
4310 # This version was released in XFree86 4.3.
4311 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
4312 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4313 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
4315 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4316 %p7%t;8%;m%?%p9%t\016%e\017%;,
4319 # This version was released in XFree86 4.4.
4320 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
4321 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
4322 rin=\E[%p1%dT, use=xterm-xf86-v43,
4324 xterm-xfree86|xterm terminal emulator (XFree86),
4327 # This version reflects the current xterm features.
4328 xterm-new|modern xterm terminal emulator,
4330 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
4331 rin=\E[%p1%dT, use=ansi+rep, use=ecma+strikeout,
4332 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
4335 # This fragment is for people who cannot agree on what the backspace key
4337 xterm+kbs|fragment for backspace key,
4340 # This fragment describes as much of XFree86 xterm's "pc-style" function
4341 # keys as will fit into terminfo's 60 function keys.
4344 # ---------------------------------
4351 # 8 Shift + Alt + Control
4352 # ---------------------------------
4353 # The meta key may also be used as a modifier in this scheme, adding another
4354 # bit to the parameter.
4355 xterm+pcfkeys|fragment for PC-style fkeys,
4356 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
4359 xterm+noapp|fragment with cursor keys in normal mode,
4360 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
4363 xterm+app|fragment with cursor keys in application mode,
4364 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
4367 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
4368 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
4369 # copied the earlier scheme, as noted in the "use=" clauses in this file.
4371 # The original assignments from patch #94 for cursor-keys had some technical
4374 # A parameter for a function-key to represent a modifier is just more
4375 # bits. But for a cursor-key it may change the behavior of the
4376 # application. For instance, emacs decodes the first parameter of a
4377 # cursor-key as a repeat count.
4379 # A parameterized string should (really) not begin with SS3 (\EO).
4380 # Rather, CSI (\E[) should be used.
4382 # For these reasons, the original assignments were deprecated. For
4383 # compatibility reasons, they are still available as a setting of xterm's
4384 # modifyCursorKeys resource. These fragments list the modified cursor-keys
4385 # that might apply to xterm+pcfkeys with different values of that resource.
4387 # These entries will have warnings when checking with tic because the kri/kind
4388 # capabilities duplicate the kUP/kDN extensions. This is intentional, though
4389 # not part of the original plan. The changes for xterm patch #206 (2005/11/3)
4390 # show that kri/kind were seen much later as part of a set including kLFT/kRIT:
4392 # * modify xterm-new terminfo entry to use capabilities for shifted
4393 # scroll forward/reverse as shifted cursor up/down.
4395 # In the 1980s when terminfo was defined, the developers made more of
4396 # a distinction between shifted up/down versus shifted left/right since most
4397 # terminals can index (scroll up/down), while few can scroll left/right.
4398 xterm+pcc3|fragment with modifyCursorKeys:3,
4399 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
4400 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
4401 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
4402 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
4403 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
4404 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
4405 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
4406 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
4409 xterm+pcc2|fragment with modifyCursorKeys:2,
4410 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
4411 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
4412 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
4413 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
4414 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
4415 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
4416 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
4418 xterm+pcc1|fragment with modifyCursorKeys:1,
4419 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
4420 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
4421 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
4422 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
4423 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
4424 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
4426 xterm+pcc0|fragment with modifyCursorKeys:0,
4427 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
4428 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
4429 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
4430 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
4431 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
4432 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4435 # Here are corresponding fragments from xterm patch #216:
4437 xterm+pcf0|fragment with modifyFunctionKeys:0,
4438 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4439 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4440 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4441 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4442 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4443 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4444 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4445 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4446 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4447 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4448 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4449 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4450 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4451 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4452 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4453 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4454 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4456 xterm+pcf2|fragment with modifyFunctionKeys:2,
4457 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4458 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4459 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4460 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4461 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4462 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4463 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4464 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4465 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4466 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4467 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4468 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4469 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4470 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4471 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4472 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4473 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4474 kf8=\E[19~, kf9=\E[20~,
4476 # Chunks from xterm #230:
4477 xterm+pce2|fragment with modifyCursorKeys:2,
4478 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4479 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4480 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4481 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4482 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4483 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4484 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4485 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4486 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4487 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4488 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4491 xterm+edit|fragment for 6-key editing-keypad,
4492 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4495 xterm+pc+edit|fragment for pc-style editing keypad,
4496 kend=\E[4~, khome=\E[1~,
4498 xterm+vt+edit|fragment for vt220-style editing keypad,
4499 kfnd=\E[1~, kslt=\E[4~,
4501 # These variations for alternate-screen and title-stacking were introduced by
4503 xterm+noalt|xterm without altscreen,
4506 xterm+alt1049|xterm 90 feature,
4507 rmcup=\E[?1049l, smcup=\E[?1049h,
4509 xterm+titlestack|xterm 251 feature,
4510 rmcup=\E[23;0;0t, smcup=\E[22;0;0t,
4512 xterm+alt+title|xterm 90 and 251 features combined,
4513 rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t,
4515 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
4516 # Alternatively, the same scheme with old-style function keys as in xterm-r6
4517 # is shown here (because that is used in mrxvt and mlterm):
4518 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
4519 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
4520 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
4521 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
4522 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
4523 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
4524 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
4525 kf63=\E[13;4~, use=xterm+pcf2,
4527 # This chunk is used for building the VT220/Sun/PC keyboard variants.
4528 xterm-basic|modern xterm terminal emulator - common,
4529 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
4530 colors#8, cols#80, it#8, lines#24, pairs#64,
4531 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4532 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4533 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
4534 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4535 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4536 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4537 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
4538 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4539 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
4540 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4541 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
4542 is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
4543 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4544 rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
4545 rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
4546 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
4548 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4550 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4552 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
4553 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
4554 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
4555 smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, smul=\E[4m,
4556 tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J, use=ecma+italics,
4557 use=ansi+pp, use=xterm+kbs, use=xterm+alt+title,
4560 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
4561 # In retrospect, something like xterm-r6 was intended here -TD
4562 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
4563 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
4567 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
4570 # If configured to support 88- or 256-colors (which is fairly common in 2009),
4571 # xterm also recognizes the control sequences for initc -TD
4572 xterm-16color|xterm with 16 colors like aixterm,
4574 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4575 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4576 oc=\E]104\007, rs1=\Ec\E]104\007, use=ibm+16color,
4579 # 256-colors is a compile-time feature of XFree86 xterm beginning with
4580 # xterm patch #111 (1999/7/10) -TD
4581 xterm+256color|xterm 256-color feature,
4583 colors#0x100, pairs#0x10000,
4584 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4585 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4587 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4589 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4593 # palette is hardcoded...
4594 xterm+256setaf|xterm 256-color (set-only),
4596 colors#0x100, pairs#0x10000,
4597 initc@, op=\E[39;49m,
4598 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4600 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4604 # 88-colors is a compile-time feature of XFree86 xterm beginning with
4605 # xterm patch #115 (1999/9/18) -TD
4607 # Note that the escape sequences used are the same as for 256-colors - xterm
4608 # has a different table of default color resource values. If built for
4609 # 256-colors, it can still handle an 88-color palette by using the initc
4612 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
4613 # which support the xterm+256color feature support the associated initc
4614 # capability. So it is cancelled in the entries which use this and/or the
4615 # xterm+256color block.
4617 # The default color palette for the 256- and 88-colors are different. A
4618 # given executable will have one palette (perhaps compiled-in). If the program
4619 # supports xterm's control sequence, it can be programmed using initc.
4620 xterm+88color|xterm 88-color feature,
4621 colors#88, pairs#7744, use=xterm+256color,
4623 # These variants of XFree86 3.9.16 xterm are built as a configure option.
4624 xterm-256color|xterm with 256 colors,
4625 rs1=\Ec\E]104\007, use=xterm+256color, use=xterm-new,
4626 xterm-88color|xterm with 88 colors,
4627 rs1=\Ec\E]104\007, use=xterm+88color,
4630 # Emacs 26.1 and later support direct color mode in terminals, using a
4631 # combination of user-defined capabilities and ncurses-dependent function
4632 # calls. We will not include that here.
4634 # Here is a first revision, which (disregarding the reuse of colors 1-7 which
4635 # is of interest only to the numerically illiterate), is compatible with other
4636 # terminal descriptions written for curses. It relies upon the extended range
4637 # for numeric capabilities provided in ncurses 6.1:
4638 xterm+direct2|xterm with direct-color indexing,
4640 colors#0x1000000, pairs#0x10000,
4641 initc@, op=\E[39;49m,
4642 setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:%p1%{65536}%/%d\:%p1
4643 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4644 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:%p1%{65536}%/%d\:%p1
4645 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4647 xterm-direct2|xterm with direct-color indexing (old),
4648 use=xterm+direct2, use=xterm+titlestack, use=xterm,
4650 # That in turn had a problem: in the original patch submitted for KDE konsole
4651 # in 2006, the submitter and the developer alike overlooked a "color space
4652 # identifier" parameter. This version provides for that parameter:
4653 xterm+direct|xterm with direct-color indexing,
4655 colors#0x1000000, pairs#0x10000,
4656 initc@, op=\E[39;49m,
4657 setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:\:%p1%{65536}%/%d\:%p1
4658 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4659 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:\:%p1%{65536}%/%d\:%p1
4660 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4662 xterm-direct|xterm with direct-color indexing,
4663 use=xterm+direct, use=xterm,
4665 # Here are corresponding flavors for terminals which could use the feature:
4666 iterm2-direct|iTerm2 with direct-color indexing,
4667 use=xterm+direct, use=iterm2,
4668 mlterm-direct|mlterm with direct-color indexing,
4669 use=xterm+direct, use=mlterm,
4671 # Meanwhile, in KDE #107487, the patch submitter and the developer both saw
4672 # that xterm's original implementation should have used colons for the
4673 # subparameter separators, but chose not to correct this in konsole. As of
4674 # late 2017, konsole still accepts only the nonstandard semicolon delimiters.
4675 xterm+indirect|xterm with direct-color indexing (old),
4677 colors#0x1000000, pairs#0x10000,
4678 initc@, op=\E[39;49m,
4679 setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256}
4680 %/%{255}%&%d;%p1%{255}%&%d%;m,
4681 setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256}
4682 %/%{255}%&%d;%p1%{255}%&%d%;m,
4684 konsole-direct|konsole with direct-color indexing,
4685 use=xterm+indirect, use=konsole,
4686 st-direct|st with direct-color indexing,
4687 use=xterm+indirect, use=st,
4688 vte-direct|vte with direct-color indexing,
4689 use=xterm+indirect, use=vte,
4692 # + Apple's Terminal.app does not recognize either form of the direct-color
4694 # + Cygwin's mintty recognizes xterm's original implementation, does okay with
4695 # the colors. Like vte, it is a subset of xterm, although different
4696 # omissions/reservations of modified-keys are seen in testing.
4697 # + PuTTY 0.70 seems to recognize xterm's original implementation but does
4698 # nothing useful with the colors.
4699 # + Teraterm 4.97, like PuTTY (no good).
4700 # + terminology 0.91 recognizes xterm's original implementation, but does
4701 # nothing useful with it.
4705 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
4706 # asked for some of xterm's advanced features to be added to its terminfo
4707 # entry. It defines extended capabilities not found in standard terminfo or
4708 # termcap. These are useful in tmux, for instance, hence the name.
4710 # One caveat in adding extended capabilities in ncurses is that if the names
4711 # are longer than two characters, then they will not be visible through the
4712 # termcap interface.
4714 # Ms modifies the selection/clipboard. Its parameters are
4715 # p1 = the storage unit (clipboard, selection or cut buffer)
4716 # p2 = the base64-encoded clipboard content.
4718 # Ss is used to set the cursor style as described by the DECSCUSR
4719 # function to a block or underline.
4720 # Se resets the cursor style to the terminal power-on default.
4722 # Cs and Cr set and reset the cursor colour.
4723 xterm+tmux|advanced xterm features used in tmux,
4724 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
4725 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
4727 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
4728 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
4729 # To use it, your decTerminalID resource must be set to 200 or above.
4736 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
4737 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
4738 colors#8, cols#80, it#8, lines#24, pairs#64,
4739 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4740 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
4741 civis=\233?25l, clear=\233H\2332J,
4742 cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr,
4743 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n,
4744 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
4745 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
4746 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
4747 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
4748 flash=\233?5h$<100/>\233?5l, home=\233H,
4749 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
4750 il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m,
4751 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4753 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
4754 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
4755 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
4756 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
4757 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
4758 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
4759 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
4760 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
4761 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
4762 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
4763 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
4764 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
4765 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
4767 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4769 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
4770 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4771 %{6}%=%t3%e%p1%d%;m,
4772 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4773 %{6}%=%t3%e%p1%d%;m,
4774 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4775 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
4776 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
4777 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
4778 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
4779 u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c,
4780 vpa=\233%i%p1%dd, use=xterm+kbs,
4782 xterm-hp|xterm with hpterm function keys,
4783 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
4784 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
4785 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
4786 knp=\ES, kpp=\ET, use=xterm-basic,
4788 xterm-sco|xterm with SCO function keys,
4789 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4790 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4791 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4792 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4793 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4794 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4795 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4796 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4797 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4798 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4799 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4800 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
4803 # The xterm-new description has all of the features, but is not completely
4804 # compatible with vt220. If you are using a Sun or PC keyboard, set the
4805 # sunKeyboard resource to true:
4806 # + maps the editing keypad
4807 # + interprets control-function-key as a second array of keys, so a
4808 # 12-fkey keyboard can support vt220's 20-fkeys.
4809 # + maps numeric keypad "+" to ",".
4810 # + uses DEC-style control sequences for the application keypad.
4812 xterm-vt220|xterm emulating vt220,
4813 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4814 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4815 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4816 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
4817 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4818 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4819 use=xterm+app, use=xterm+edit, use=xterm-basic,
4822 xterm-vt52|xterm emulating dec vt52,
4823 cols#80, it#8, lines#24,
4824 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4825 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
4826 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
4827 home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4828 kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
4831 xterm-noapp|xterm with cursor keys in normal mode,
4832 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
4835 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
4836 lines#24, use=xterm-old,
4838 # This is xterm for ncurses.
4839 xterm|xterm terminal emulator (X Window System),
4842 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
4843 # setting the vt100Graphics resource to false.
4844 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
4847 # These building-blocks allow access to the X titlebar and icon name as a
4848 # status line. There are a few problems in using them in entries:
4850 # a) tsl should have a parameter to denote the column on which to transfer to
4852 # b) the "0" code for xterm updates both icon-title and window title. Some
4853 # window managers such as twm (and possibly window managers descended from
4854 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
4855 # don't want to mess with icon-name when using those window managers.
4857 # The extension "TS" is preferable, because it does not accept a parameter.
4858 # However, if you are using a non-extended terminfo, "TS" is not visible.
4859 xterm+sl|access X title line and icon name,
4861 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
4862 xterm+sl-twm|access X title line (pacify twm-descended window managers),
4864 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
4866 # In contrast, this block can be used for a DEC vt320 and up. There are two
4869 # DECSASD (select active status display)
4870 # \E[0$} Main display
4871 # \E[1$} Status line
4873 # DECSSDT (select status line type)
4874 # \E[0$~ No status line
4875 # \E[1$~ Indicator status line
4876 # \E[2$~ Host-writable status line
4878 # The building block assumes that the terminal always shows something at the
4879 # status line (either the indicator, or status line). That is because if no
4880 # status line is used, then the terminal makes that line part of the user
4881 # window, changing its size without notice.
4883 # Because there is no "esl" (enable status line) capability, the "tsl"
4884 # capability ensures that the status line is host-writable. A DEC terminal
4885 # will clear the status line when changing from indicator to host-writable
4888 # Once on the status line, the row part of cursor addressing is ignored. Since
4889 # tsl expects a parameter (to specify the column), the shortest addressing that
4890 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
4892 dec+sl|DEC VTxx status line,
4894 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
4897 # The following xterm variants don't depend on your base version
4899 # xterm with bold instead of underline
4900 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
4901 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
4903 smso=\E[7m, smul=\E[1m, use=xterm-old,
4905 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
4906 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
4907 ich@, ich1@, use=xterm,
4908 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
4909 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
4910 rmcup@, smcup@, use=xterm,
4913 # The xterm mouse protocol is used by other terminal emulators.
4914 # In this section, two extended capabilities are used to illustrate the mouse
4915 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
4916 # enabling/disabling other mouse protocols. The "xm" capability describes the
4917 # mouse response; currently there is no interpreter which would use this
4918 # information to make the mouse support completely data-driven.
4920 # Here is the "original" xterm mouse protocol.
4922 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
4923 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
4924 # sequence", referring to the fact that it does not correspond to a "real"
4925 # terminal. The mouse responses for the X10 protocol are sent only for
4927 xterm+x10mouse|X10 xterm mouse protocol,
4928 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
4929 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
4930 xterm-x10mouse|X10 xterm mouse,
4931 use=xterm+x10mouse, use=xterm,
4933 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
4936 # The mouse responses for the X11 protocol covered button releases, as well as
4939 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
4942 # The modifiers are not reflected in this description because as used in xterm
4943 # they are normally inaccessible because the translations resources assign
4944 # shift and control to other features. However, they are important because
4945 # they take up space in the first byte of the response. The other bits of this
4946 # byte are used to encode the button number for both presses and releases.
4947 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
4948 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
4949 # provide additional features, e.g., wheel mouse.
4951 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
4952 # "t" or "T", which was activated by double-clicking. The "t" response was
4953 # used when the starting/ending positions were the same.
4955 # X11R3 (February 1988) added the highlight/tracking mode.
4957 # X11R4 (December 1989) added the control sequences document, listing the
4958 # control sequences for the X10/X11 protocols without descriptions. It also
4959 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
4960 # X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal.
4962 # X11R5 (November 1993) gave a description of the mouse protocol.
4964 # X11R6 (January 1995) moved the control sequences document out of the xterm
4965 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
4966 # no new information.
4967 xterm+x11mouse|X11 xterm mouse protocol,
4968 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
4969 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%c%p1%'!'%+%c,
4970 xterm-x11mouse|X11 mouse,
4971 use=xterm+x11mouse, use=xterm,
4973 # Here is a suggested description of the xterm highlighting protocol.
4974 # A more complicated example could be constructed to account for the "t"
4976 xterm+x11hilite|X11 xterm mouse protocol with highlight,
4977 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
4978 xm=\E[%p7%'!'%+%p6%'!'%+%c%p9%'!'%+%c%p8%'!'%+%c%p2%'!'%+%c
4980 xterm-x11hilite|X11 mouse with highlight,
4981 use=xterm+x11mouse, use=xterm,
4983 # The preceding were the sources from X Consortium. Other sources (or patches)
4984 # were available. Starting in mid-1995, XFree86 developers collected some of
4985 # those changes and began improvements, e.g., to support color. This was, by
4986 # the way, around the same time that rxvt developers began implementing color,
4987 # though dates (and attributions) are not well documented. I became interested
4988 # in xterm in late 1995, and involved in early 1996. To complete the picture,
4989 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
4991 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
4992 # "any-event" mouse mode.
4993 xterm+sm+1002|xterm any-event mouse,
4994 kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
4995 xterm-1002|xterm any-event mouse,
4996 use=xterm+sm+1002, use=xterm,
4998 xterm+sm+1003|testing xterm-mouse,
4999 kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
5001 xterm-1003|testing xterm-mouse,
5002 use=xterm+sm+1003, use=xterm,
5004 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
5007 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
5008 # dropping support for the X11 mouse protocol's shift-modifier and using
5009 # available bits in the first byte of the response to encode buttons 4 and 5.
5010 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
5011 # older configurations which might have used the obsolete modifiers.
5013 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
5014 # where the coordinates in the mouse response would be encoded in UTF-8,
5015 # thereby extending the range of coordinates past 222=(255-33). This is the
5016 # "1005" mouse mode.
5017 xterm+sm+1005|xterm UTF-8 mouse,
5018 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
5019 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
5020 xterm-1005|xterm UTF-8 mouse,
5021 use=xterm+sm+1005, use=xterm,
5023 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
5024 # SGR-style parameters.
5026 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
5027 # (By the way, this is a problem with the X11 protocol). A more plausible
5028 # criticism is that the responses provided by the 1005 mode are not distinct
5029 # from the non-1005 responses.
5031 # As an alternative (and fixing the longstanding limitation of X11 mouse
5032 # protocol regarding button-releases), I provided this:
5033 xterm+sm+1006|xterm SGR-mouse,
5034 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
5035 xm=\E[<%p1%d;%p2%d;%p3%d;%?%p4%tM%em%;,
5036 xterm-1006|xterm SGR-mouse,
5037 use=xterm+sm+1006, use=xterm,
5040 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
5041 # (kterm should not invoke DEC Graphics as the alternate character set
5042 # -- Kenji Rikitake)
5043 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
5044 # -- MATSUMOTO Shoji)
5045 # kterm implements acsc via built-in table of X Drawable's
5046 kterm|kterm kanji terminal emulator (X window system),
5049 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
5050 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
5051 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
5052 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5054 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
5055 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
5056 kterm-color|kterm-co|kterm with ANSI colors,
5057 ncv@, use=kterm, use=ecma+color,
5061 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
5062 # variant of xterm which is apparently no longer supported, but are interesting
5063 # because they illustrate SVr4 curses mouse controls - T.Dickey
5064 xtermm|xterm terminal emulator (monocrome),
5065 OTbs, am, km, mir, msgr, xenl,
5066 btns#3, cols#80, it#8, lines#24,
5067 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5068 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5069 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5070 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5071 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5072 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5073 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
5074 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
5075 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
5076 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
5077 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
5078 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
5079 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
5080 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
5081 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5082 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
5083 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5084 %;m%?%p9%t\016%e\017%;,
5085 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
5086 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
5088 xtermc|xterm terminal emulator (color),
5089 colors#8, ncv#7, pairs#64,
5090 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5091 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5093 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5097 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
5098 # Here's a termcap entry I've been using for xterm_color, which comes
5099 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
5100 # color stuff, I also have a status line defined as the window manager
5101 # title bar. [I have translated it to terminfo -- ESR]
5102 xterm-pcolor|xterm with color used for highlights and status line,
5104 bold=\E[1;43m, rev=\E[7;34m,
5105 sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
5106 %t;7;31%;%?%p3%t;7;34%;m,
5107 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
5109 # This describes the capabilities of color_xterm, an xterm variant from
5110 # before ECMA-64 color support was folded into the main-line xterm release.
5111 # This entry is straight from color_xterm's maintainer.
5112 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
5113 # The README's with the distribution also say that it supports SGR 21, 24, 25
5114 # and 27, but they are not present in the terminfo or termcap.
5115 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
5116 OTbs, am, km, mir, msgr, xenl, XT,
5117 cols#80, it#8, lines#65, ncv@,
5118 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5119 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5120 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5121 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5122 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5123 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
5124 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
5125 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5126 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
5127 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
5128 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
5129 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5130 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
5131 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
5132 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
5133 rmso=\E[27m, rmul=\E[24m,
5134 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
5136 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5137 %;m%?%p9%t\016%e\017%;,
5138 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
5139 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
5140 smul=\E[4m, use=ecma+color, use=vt220+keypad,
5142 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
5143 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
5144 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
5145 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
5146 # that each of those implements the home, end, delete keys differently.
5148 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
5149 # colors; note that this is not compatible with the 5.2 version.
5150 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
5151 # match XFree86's xterm.terminfo usage and prevent circular links
5152 xterm-color|nxterm|generic color xterm,
5154 op=\E[m, use=xterm-r6, use=klone+color,
5156 # This entry describes an xterm with Sun-style function keys enabled
5157 # via the X resource setting "xterm*sunFunctionKeys:true"
5158 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
5159 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
5160 # because we want it to be seen as <kcpy>.
5161 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
5162 # with their Sun keyboard labels instead.
5163 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
5164 xterm-sun|xterm with sunFunctionKeys true,
5165 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
5166 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
5167 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
5168 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
5169 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
5170 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
5171 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
5172 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
5173 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
5174 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
5175 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
5176 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
5178 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
5179 cols#80, lines#24, use=xterm-sun,
5182 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
5183 gnome-rh62|Gnome terminal,
5185 kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5188 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
5190 # This implements a subset of vt102 with a random selection of features from
5191 # other terminals such as color and function-keys.
5193 # shift-f1 to shift-f10 are f11 to f20
5195 # NumLock changes the application keypad to approximate vt100 keypad, except
5196 # that there is no escape sequence matching comma (,).
5198 # Other defects observed:
5199 # vt100 LNM mode is not implemented.
5200 # vt100 80/132 column mode is not implemented.
5201 # vt100 DECALN is not implemented.
5202 # vt100 DECSCNM mode is not implemented, so flash does not work.
5203 # vt100 TBC (tab reset) is not implemented.
5204 # xterm alternate screen controls do not restore cursor position properly
5205 # it hangs in tack after running function-keys test.
5206 gnome-rh72|GNOME Terminal,
5208 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
5209 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
5210 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
5212 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
5214 # GNOME Terminal 2.0.1 (Redhat 8.0)
5216 # Documentation now claims it implements vt220 (which is demonstrably false).
5217 # However, it does implement ECH, which is a vt220 feature. And there are
5218 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
5219 # more of its bugs using vttest.
5221 # However, note that bce and msgr are broken in this release. Tabs (tbc and
5222 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
5224 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
5225 # operations. Shift-tab generates a distinct sequence so it can be argued
5226 # that it implements kcbt.
5227 gnome-rh80|GNOME Terminal,
5229 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?,
5230 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
5232 # GNOME Terminal 2.2.1 (Redhat 9.0)
5234 # bce and msgr are repaired.
5235 gnome-rh90|GNOME Terminal,
5237 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
5238 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
5239 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
5242 # GNOME Terminal 2.14.2 (Fedora Core 5)
5243 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
5244 gnome-fc5|GNOME Terminal,
5246 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
5248 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
5250 # GNOME Terminal 2.18.1 (2007 snapshot)
5252 # For any "recent" version of gnome-terminal, it is futile to attempt to
5253 # support modifiers on cursor- and keypad keys because the program usually
5254 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
5255 # of the keys (which more/less correspond to the termcap values), and will
5256 # interpret those according to the $TERM value, but others not in the
5257 # terminfo according to some constantly changing set of hacker guidelines -TD
5258 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
5259 use=xterm+pcc2, use=gnome-fc5,
5260 gnome-2007|GNOME Terminal snapshot 2.18.1,
5263 # GNOME Terminal 2.22.3 (2008 snapshot)
5265 # In vttest, it claims to be a vt220 with national replacement character-sets,
5266 # but aside from the identifier string, implements only a small fraction of
5267 # vt220's behavior, which will make it less usable on a VMS system (unclear
5268 # what the intent of the developer is, since the NRC feature exposed in vttest
5269 # by this change does not work).
5270 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
5271 use=vte+pcfkeys, use=vte-2007,
5272 gnome-2008|GNOME Terminal snapshot 2.22.3,
5275 # GNOME Terminal 3.6.0 (2012)
5276 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
5277 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
5280 # Testing with tack shows that flash does not/has not worked -TD
5281 vte-2012|VTE 0.34.1,
5283 dim=\E[2m, flash@, invis=\E[8m, rmso=\E[27m, rmul=\E[24m,
5284 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
5285 %|%t;7%;m%?%p9%t\016%e\017%;,
5286 use=ecma+italics, use=vte-2008,
5287 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
5288 # 61 differences from a correct entry for gnome terminal.
5289 gnome-2012|GNOME Terminal 3.6.0,
5292 # Before 2008, GNOME terminal could automatically use the contents of the
5293 # "xterm" terminfo to supply key information which is not built into the
5294 # program. With 2.22.3, this list was built into the program (which addressed
5295 # the inadvertent use of random terminfo data, though using a set of values
5296 # which did not correspond to any that xterm produced - still not solving the
5297 # problem that GNOME terminal hardcoded the $TERM variable as "xterm").
5299 # terminfo modifier code keys
5300 # kf13-kf24 shift 2 F1 to F12
5301 # kf25-kf36 control 5 F1 to F12
5302 # kf37-kf48 shift/control 6 F1 to F12
5303 # kf49-kf60 alt 3 F1 to F12
5304 # kf61-kf63 shift-alt 4 F1 to F3
5306 # The parameters with \EO (SS3) are technically an error, since SS3 should have
5307 # no parameters. This appears to be rote copying based on xterm+pcc0.
5308 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
5309 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
5310 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
5311 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
5312 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
5313 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
5314 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
5316 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
5319 # deprecated - use "vte" for newer versions
5320 gnome|GNOME Terminal,
5323 # relevant changes were made in January 2014, and later.
5325 # Originally VTE was promoted as a library able to emulate any terminal by
5326 # reading its terminal description. In practice, that never got beyond the
5327 # ability to read definitions of special keys (function-, editing-, cursor).
5329 # Before 2014, VTE had a termcap reader (originally pointing to a private copy
5330 # of a termcap file derived from xterm). That was incomplete because it did
5331 # not have any of the modifier-key information used for xterm's function-,
5332 # editing-, and cursor-keys. Having its own reader was unnecessary since
5333 # ncurses provides that information; used since xterm patch #225 in 2007.
5335 # During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900,
5336 # gnome #730137) dealt with attempts to recast that termcap reader as library
5337 # calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c),
5338 # abandoning that and finally constructing a table to match xterm's default
5339 # behavior, e.g., for "xterm+pcfkeys".
5340 vte-2014|VTE 0.35.1,
5342 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
5343 ich=\E[%p1%d@, indn=\E[%p1%dS, kent=\EOM, rin=\E[%p1%dT,
5344 use=xterm+sm+1006, use=xterm+pcfkeys, use=vte-2012,
5346 # As of January 2018, this is the most recent release,
5347 # e.g., with gnome-terminal 3.26.2
5348 vte-2017|VTE 0.50.2,
5349 use=ecma+strikeout, use=vte-2014,
5351 vte|VTE aka GNOME Terminal,
5354 vte-256color|VTE with xterm 256-colors,
5355 use=xterm+256color, use=vte,
5356 gnome-256color|GNOME Terminal with xterm 256-colors,
5359 # XFCE Terminal 0.2.5.4beta2
5361 # This is based on some of the same source code, e.g., the VTE library, as
5362 # gnome-terminal, but has fewer features, fails more screens in vttest.
5363 # Since most of the terminfo-related behavior is due to the VTE library,
5364 # the terminfo is the same as gnome-terminal.
5370 # https://github.com/thestinger/termite
5372 # A review requires install of Arch Linux since Fedora and Debian don't have
5373 # this program. It uses "vte3-ng" (a conflicting package), which is here:
5374 # https://github.com/thestinger/vte-ng
5375 # which (based on the default branch setting) seems to be a fork of vte
5376 # 0.48.2, and is noted as such in Arch:
5377 # https://www.archlinux.org/packages/community/x86_64/vte3-ng/
5378 # It won't be merged:
5379 # https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10
5380 # https://bugzilla.gnome.org/show_bug.cgi?id=78291
5381 # but perhaps made obsolete.
5383 # The entry as given was mislabeled "xterm-termite" (it is not xterm), and
5384 # was mostly cut/paste from xterm-256color, but since VTE does not actually
5385 # implement several of the features in that terminal description, this one is
5386 # trimmed to eliminate those. Also, since it is a slightly older version of
5387 # VTE, it lacks a few more features (again, trimmed).
5388 termite|VTE-based terminal,
5389 am, ccc, km, mir, msgr, npc, xenl,
5390 cols#80, it#8, lines#24, ncv@,
5391 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
5393 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5394 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
5395 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5396 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5397 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5398 dch=\E[%p1%dP, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5399 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
5400 ht=^I, hts=\EH, ind=\n, indn=\E[%p1%dS, invis=\E[8m,
5401 is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z,
5402 kent=\EOM, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM,
5403 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
5404 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
5405 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
5406 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
5408 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
5409 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5410 vpa=\E[%i%p1%dd, use=ansi+idc, use=ansi+idl,
5411 use=ansi+enq, use=ecma+italics, use=xterm+256color,
5412 use=ecma+color, use=xterm+pcfkeys, use=xterm+sl-twm,
5415 # Multi-Gnome-Terminal 1.6.2
5417 # This does not use VTE, and does have different behavior (compare xfce and
5419 mgt|Multi GNOME Terminal,
5420 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
5423 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
5424 # or not is debatable).
5427 kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
5429 # Konsole 1.0.1 (2001/11/25)
5430 # (formerly known as kvt)
5432 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
5433 # simplify this entry (and point out why konsole isn't xterm), we base this on
5434 # xterm-r6. The default keyboard appears to be 'linux'.
5437 # a) konsole implements several features from XFree86 xterm, though none of
5438 # that is documented - except of course in its source code - apparently
5439 # because its implementors are unaccustomed to reading documentation - as
5440 # evidenced by the sparse and poorly edited documentation distributed with
5441 # konsole. Some features such as the 1049 private mode are recognized but
5442 # incorrectly implemented as a duplicate of the 47 private mode.
5443 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
5444 # sends PC-style escapes rather than vt100.
5445 # c) fails vttest menu 3 (Test of character sets) because it does not properly
5446 # parse some control sequences. Also fails vttest Primary Device Attributes
5447 # by sending a bogus code (in the source it says it's supposed to be a
5448 # vt220, which is doubly incorrect because it does not implement vt220
5449 # control sequences except for a few special cases). Treat it as a
5450 # mildly-broken vt102.
5452 # Update for konsole 1.3.2:
5453 # The 1049 private mode works (but see the other xterm screens in vttest).
5454 # Primary Device Attributes now returns the code for a vt100 with advanced
5455 # video option. Perhaps that's intended to be a "mildly-broken vt102".
5457 # Updated for konsole 1.6.4:
5458 # add konsole-solaris
5460 # Updated for konsole 1.6.6:
5461 # add control-key modifiers for function-keys, etc.
5463 # Updated for konsole 2.3 (October 2008):
5464 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
5465 # different from xterm (and vt100's). They have the same behavior in
5466 # this detail, but it is unclear which copies the other.
5468 # Updated for konsole 2.12.4 (late 2013):
5471 # Updated for konsole 16.07 (mid 2016):
5472 # add dim, invis, strikeout
5473 # (also overline, which is too rarely used to provide as an extension)
5475 # Updated for konsole 17.12.0 (late 2017):
5476 konsole-base|KDE console window,
5479 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, dim=\E[2m,
5480 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
5481 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, invis=\E[8m, kbs=^?,
5482 kdch1=\E[3~, kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@,
5483 kf15@, kf16@, kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@,
5484 kf7@, kf8@, kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT,
5485 rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
5486 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
5487 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5488 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5489 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
5490 use=ecma+strikeout, use=ecma+italics, use=ecma+color,
5493 # The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and
5494 # "vt100" key-table files along with a compiled-in default key-table.
5496 # The main difference between the two keytabs was that the developer equated
5497 # "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from
5498 # that. For the same reason, the home/end keys differ. A VT100 had none of
5499 # that. The otherwise identical keytabs have definitions to model the VT52
5500 # cursor-keys and the VT100 cursor-keys with application versus normal modes.
5502 # An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January
5503 # 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were
5504 # dropped from the install in June 2008.
5506 # The default keytab added in January 2000 was originally titled "X11 R6",
5507 # and likewise retitled to "XFree 4".
5509 # A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab
5510 # and changing backspace to ^H, removing that keytab's attempt to model the
5511 # VT100 keypad and VT52 (KDE #20459).
5513 # The developers made changes to the default and linux keytabs. Comparing
5514 # the original and 2018 versions using diffstat:
5515 # default: 119 added, 147 deleted, 28 unchanged
5516 # linux: 47 added, 28 deleted, 104 unchanged
5518 # Most of the change for the default keytab was to make konsole act more like
5519 # xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749
5520 # (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was
5521 # made an external file (like "linux" and "solaris"), and some further
5522 # refinement made. But there are still flaws in the scheme.
5524 # Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for
5525 # Shift into a placeholder in the table entries. That works well if all of the
5526 # modified keys are modified in the same way. But xterm does not do that. The
5527 # first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad
5528 # keys. For example, F2 sends \EOQ in both terminals because of this feature.
5529 # But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing:
5530 # kf14: '\E[1;2Q', '\EO2Q'.
5532 # In effect, a quarter of konsole's function-keys are different from xterm.
5534 # It is not a simple blunder:
5535 # a) xterm patch #121 (November 1999), providing the first version of the
5536 # PC-style modifiers would send \EO2Q
5537 # b) xterm patch #216 (July 2006) amended this and other details, provided
5538 # better documentation for the modifiers and made the behavior configurable,
5539 # e.g., using the modifyFunctionKeys resource. The reason why it sends
5540 # \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The
5541 # changelog points this out as "avoid sending SS3 with parameters".
5542 # c) That came after AnyMod was introduced, but still early enough that one
5543 # might expect konsole's developers to followup. Twelve years later that
5544 # has yet to happen.
5546 # As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux",
5548 konsole-linux|KDE console window with linux keyboard,
5549 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
5550 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
5551 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5552 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
5553 konsole-solaris|KDE console window with Solaris keyboard,
5554 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5556 # Obsolete: x11r5.keymap
5557 # KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm
5558 # terminfo at the time rather than testing the code.
5559 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
5560 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5562 # The value for kbs (see konsole-vt100) reflects local customization rather
5563 # than the settings used for XFree86 xterm.
5564 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
5565 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
5568 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
5569 kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0,
5572 # Obsolete: vt100.keymap
5573 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
5574 # it is still useful for deriving the other entries, since the developer
5575 # provided function-keys based on xterm.
5576 konsole-vt100|KDE console window with vt100 (sic) keyboard,
5577 kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
5578 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
5579 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
5580 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5581 khome=\E[H, use=konsole-base,
5583 # Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in
5584 # September 2008 and removed in June 2016. The developer who removed it stated
5585 # that it was never installed.
5586 konsole-vt420pc|KDE console window with vt420 pc keyboard,
5587 kbs=^H, kdch1=^?, use=konsole-vt100,
5589 # make a default entry for konsole
5590 konsole|KDE console window,
5593 # These were written for ncurses:
5594 konsole-16color|klone of xterm-16color,
5595 ncv#32, use=ibm+16color, use=konsole,
5596 konsole-256color|KDE console window with xterm 256-colors,
5597 use=xterm+256setaf, use=konsole,
5600 # http://mlterm.sourceforge.net/
5602 mlterm|multi lingual terminal emulator,
5605 # Tested mlterm 3.2.2:
5606 # mlterm 3.x has made changes, but they are not reflected in the included
5607 # mlterm.ti; this entry is based on testing with ncurses, tack and vttest -TD
5608 # 2018/01/21: found xterm+sm+1006 did not work with version 3.3.8
5609 mlterm3|multi lingual terminal emulator,
5610 kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
5611 use=ecma+italics, use=xterm+app, use=xterm+pcf0,
5612 use=xterm+pcc2, use=xterm+pce2, use=xterm+x11mouse,
5615 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
5617 # It is nominally a vt102 emulator, with features borrowed from rxvt and
5620 # The function keys are numbered based on shift/control/alt modifiers, except
5621 # that the control-modifier itself is used to spawn a new copy of mlterm (the
5622 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
5623 # how it is configured.
5625 # kf1 to kf12 \E[11~ to \E[24~
5626 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
5627 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
5628 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
5629 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
5630 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
5631 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
5632 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
5634 mlterm2|multi lingual terminal emulator,
5635 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
5636 colors#8, cols#80, it#8, lines#24, pairs#64,
5637 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5638 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5639 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5640 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5641 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5642 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5643 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5644 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
5645 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5646 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
5647 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
5648 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5649 kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH,
5650 kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, knp=\E[6~,
5651 kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, nel=\EE,
5652 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT,
5653 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
5654 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
5655 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
5656 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5657 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5659 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
5660 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5661 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
5662 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
5664 # The insert/delete/home/end keys do not respond to modifiers because mlterm
5665 # looks in its termcap to decide which string to send. If it used terminfo
5666 # (when available), it could use the extended names introduced for xterm.
5667 mlterm+pcfkeys|fragment for PC-style fkeys,
5668 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
5669 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
5670 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
5671 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
5672 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
5673 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
5674 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
5675 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
5676 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
5678 mlterm-256color|mlterm 3.0 with xterm 256-colors,
5679 use=xterm+256color, use=mlterm,
5682 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
5683 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
5686 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
5687 # but some applications don't work with that.
5688 # It also has an AIX extension
5692 # but the latter does not work correctly.
5694 # The distributed terminfo says it implements hpa and vpa, but they are not
5695 # implemented correctly, using relative rather than absolute positioning.
5697 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
5698 # Since rxvt is not really compatible with xterm, it should be configured as
5699 # "rxvt" or "rxvt-color".
5701 # removed dch/dch1 because they are inconsistent with bce/ech -TD
5702 # remove km as per tack test -TD
5703 rxvt-basic|rxvt terminal base (X Window System),
5704 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
5705 cols#80, it#8, lines#24,
5706 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5707 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5708 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5709 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5710 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5711 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5712 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5713 enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
5714 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5715 il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l,
5716 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
5717 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5718 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
5720 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5721 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5723 s0ds=\E(B, s1ds=\E(0, sc=\E7,
5724 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
5726 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
5727 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
5728 use=rxvt+pcfkeys, use=vt220+keypad,
5729 # Key Codes from rxvt reference:
5731 # Note: Shift + F1-F10 generates F11-F20
5733 # For the keypad, use Shift to temporarily override Application-Keypad
5734 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
5735 # is off, escape sequences toggle Application-Keypad setting.
5736 # Also note that values of Home, End, Delete may have been compiled
5737 # differently on your system.
5739 # Normal Shift Control Ctrl+Shift
5740 # Tab ^I ESC [ Z ^I ESC [ Z
5741 # BackSpace ^H ^? ^? ^?
5742 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
5743 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
5744 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5745 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
5746 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
5747 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
5748 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
5749 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
5750 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5751 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
5752 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
5753 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
5754 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
5755 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
5756 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
5757 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
5758 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
5759 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
5760 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
5761 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
5762 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
5763 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
5764 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
5765 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
5766 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
5767 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
5768 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
5769 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
5770 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
5773 # Up ESC [ A ESC [ a ESC O a ESC O A
5774 # Down ESC [ B ESC [ b ESC O b ESC O B
5775 # Right ESC [ C ESC [ c ESC O c ESC O C
5776 # Left ESC [ D ESC [ d ESC O d ESC O D
5777 # KP_Enter ^M ESC O M
5778 # KP_F1 ESC O P ESC O P
5779 # KP_F2 ESC O Q ESC O Q
5780 # KP_F3 ESC O R ESC O R
5781 # KP_F4 ESC O S ESC O S
5782 # XK_KP_Multiply * ESC O j
5783 # XK_KP_Add + ESC O k
5784 # XK_KP_Separator , ESC O l
5785 # XK_KP_Subtract - ESC O m
5786 # XK_KP_Decimal . ESC O n
5787 # XK_KP_Divide / ESC O o
5799 # The source-code for rxvt actually defines mappings for F21-F35, using
5800 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
5801 # are rare, so this entry uses the shift- and control-modifiers as in
5802 # xterm+pcfkeys to define keys past F12.
5804 # kIC is normally not used, since rxvt performs a paste for that (shifted
5805 # insert), unless private mode 35 is set.
5807 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
5808 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
5809 rxvt+pcfkeys|fragment for PC-style fkeys,
5810 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
5811 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
5812 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
5813 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5814 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5815 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5816 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
5817 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
5818 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
5819 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
5820 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
5821 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
5822 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
5823 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5824 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
5825 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
5826 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
5827 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
5828 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
5829 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
5831 # rxvt was originally "xvt", first announced in April 1993:
5832 # http://www.krsaborio.net/linux-desktops/research/1993/0416.html
5833 #------------------------------------------------------------------------------
5834 # Article: 567 of comp.os.linux.announce
5835 # Path: pavo.csi.cam.ac.uk!warwick!uknet!pipex!uunet!zaphod.mps.ohio-state.edu!
5836 # caen!batcomputer!theory.TC.Cornell.EDU!mdw
5837 # From: nation@rocket.sanders.com (Robert Nation)
5838 # Newsgroups: comp.os.linux.announce
5839 # Subject: xvt upload
5840 # Date: 16 Apr 1993 18:13:07 GMT
5841 # Organization: Cornell Theory Center
5843 # Approved: linux-announce@tc.cornell.edu (Matt Welsh)
5844 # Message-ID: <1qmsvj$pvj@fitz.TC.Cornell.EDU>
5845 # NNTP-Posting-Host: theory.tc.cornell.edu
5846 # Keywords: xvt, xterm, Xwindows
5847 # Originator: mdw@theory.TC.Cornell.EDU
5849 # Rxvt has been uploaded to /pub/Linux/Incoming/rxvt.tar.z and
5850 # rxvt.README on sunsite.unc.edu.
5852 # Xvt is an xterm replacement which uses a little less memory, and is
5853 # suitable for use on machines with small memories. Tek4010 support
5856 # Modifications were made by Rob Nation (nation@rocket.sanders.lockheed.com)
5857 # to make it a little more compact, and to add and remove certain features.
5861 # Send submissions for comp.os.linux.announce to: linux-announce@tc.cornell.edu
5862 #------------------------------------------------------------------------------
5864 # Though its change-log does not mention this, John Davis has stated that he
5865 # was the author of the changes to use the bce ("new color model") which was
5866 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
5867 # dates, nor give developer's names. Initial color support was added for rxvt
5868 # "2.0", which was sometime in 1994.
5870 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
5871 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
5873 # https://web.archive.org/web/20141016124430/http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
5874 # was from one of my bug-reports -TD
5876 # While the color model both for xterm and rxvt was based on Linux console,
5877 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
5878 # behavior: inserting/deleting characters does not fill the newly empty cell
5879 # with the default background color.
5880 rxvt|rxvt terminal emulator (X Window System),
5882 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
5883 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
5884 rxvt-color|rxvt terminal emulator (X Window System),
5886 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
5887 use=xterm+256color, use=rxvt,
5888 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
5889 use=xterm+88color, use=rxvt,
5890 rxvt-xpm|rxvt terminal emulator (X Window System),
5892 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
5893 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5894 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5895 \302x\263y\363z\362{\343|\330}\234~\376,
5897 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
5898 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5899 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5900 \302x\263y\363z\362{\343|\330~\376,
5903 # This variant is supposed to work with rxvt 2.7.7 when compiled with
5904 # NO_BRIGHTCOLOR defined. rxvt needs more work...
5905 rxvt-16color|rxvt with 16 colors like aixterm,
5906 ncv#32, use=ibm+16color, use=rxvt,
5911 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
5912 # makes its function-keys different from other flavors of rxvt -TD
5914 # Testing with tack:
5915 # + made custom description (below) to work, though it sets TERM=xterm.
5917 # Testing with vttest:
5918 # + While "based on" rxvt, some of the basic functionality is broken. The
5919 # window collapses to a single line when running several of the screens
5920 # in vttest, e.g., the tests for cursor movement, screen features,
5921 # double-sized characters.
5922 # + The vt52 test works properly, but this is an exception. Due to the
5923 # other bug(s) most of vttest is untestable.
5924 # + the color test using ECH shows a gap in the bce model, like rxvt.
5926 # Testing with xterm "vttest" scripts:
5927 # + resize.pl does not work because mrxvt does implement CSI 18 t
5928 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
5929 # + none of the "dynamic colors" (OSC colors) scripts work.
5930 mrxvt|multitabbed rxvt,
5932 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
5933 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
5934 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
5935 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
5936 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
5937 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
5940 mrxvt-256color|multitabbed rxvt with 256 colors,
5941 use=xterm+256color, use=mrxvt,
5944 # From: Michael Jennings <mej@valinux.com>
5948 # removed kf0 which conflicts with kf10 -TD
5949 # remove cvvis which conflicts with cnorm -TD
5950 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
5951 # but does otherwise follow the rxvt+pcfkeys model -TD
5952 # remove nonworking flash -TD
5953 # remove km as per tack test -TD
5954 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
5955 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
5956 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
5957 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5958 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5959 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5960 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5961 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5962 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5963 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5964 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
5965 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5966 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5967 is1=\E[?47l\E>\E[?1l,
5968 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
5969 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
5970 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
5971 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5972 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
5973 rmso=\E[27m, rmul=\E[24m,
5974 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5975 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5978 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5979 %;m%?%p9%t\016%e\017%;,
5980 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
5981 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5982 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
5985 Eterm-256color|Eterm with xterm 256-colors,
5986 use=xterm+256color, use=Eterm,
5988 Eterm-88color|Eterm with 88 colors,
5989 use=xterm+88color, use=Eterm,
5992 # Based on rxvt 2.4.8, it has a few differences in key bindings
5993 aterm|AfterStep terminal,
5995 kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
5999 # This is not based on xterm's source...
6000 # vttest shows several problems with keyboard, cursor-movements.
6001 # see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
6002 xiterm|internationalized terminal emulator for X,
6004 kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6,
6008 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
6009 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
6010 # chars look like --esr)
6011 hpterm|X-hpterm|hp X11 terminal emulator,
6012 am, da, db, mir, xhp, xon,
6013 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
6014 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
6015 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
6016 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
6017 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
6018 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6019 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
6020 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
6021 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
6022 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
6023 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
6024 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
6025 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
6026 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
6027 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
6029 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
6030 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
6031 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A,
6032 smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
6034 # HPUX 11 provides a color version.
6035 hpterm-color|HP X11 terminal emulator with color,
6039 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
6040 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
6043 # This is for the extensible terminal emulator on the X11R6 contrib tape.
6044 # It corresponds to emu's internal emulation:
6046 # emu's default sets TERM to "xterm", but that doesn't work well -TD
6047 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
6048 # fixes: add civis, cnorm, sgr -TD
6049 emu|emu native mode,
6050 am, bce, mir, msgr, xon,
6051 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
6052 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
6053 \224t\225u\226v\227w\230x\231~\244,
6054 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
6055 cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
6056 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
6057 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
6058 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
6059 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
6060 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
6061 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
6062 kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01,
6063 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
6064 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
6065 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
6066 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
6067 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
6068 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
6069 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
6071 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
6073 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
6075 # vt220 Terminfo entry for the Emu emulation, corresponds to
6077 # with NumLock set (to make the keypad transmit kf0-kf9).
6078 # fixes: add am, xenl, corrected sgr0 -TD
6079 emu-220|Emu-220 (vt200-7bit mode),
6081 cols#80, it#8, lines#24, vt#200,
6082 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
6083 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
6084 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
6085 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
6086 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
6087 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
6088 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
6089 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
6090 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
6091 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
6092 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6093 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
6094 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
6095 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
6096 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
6097 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
6098 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
6099 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
6100 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
6101 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
6102 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
6103 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
6104 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6105 sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
6106 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
6109 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
6110 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
6111 # indicate that it emulates more than one terminal, but incompletely.
6113 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
6114 # It is based on vt102's entry, with some subtle differences, but also
6116 # supports ANSI colors (except for 'op' string)
6117 # apparently implements alternate screen like xterm
6118 # does not use padding, of course.
6119 mvterm|vv100|SwitchTerm aka mvTERM,
6120 am, eslok, hs, km, mir, msgr, xenl, xon,
6121 colors#8, cols#80, it#8, lines#24, pairs#64,
6122 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6123 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
6124 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6125 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6126 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6127 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
6128 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
6129 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6130 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H,
6131 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
6132 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
6133 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6134 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
6136 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
6137 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6138 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
6139 %;m%?%p9%t\016%e\017%;,
6140 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
6141 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6142 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
6146 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
6148 # "mterm -type ansi" sets $TERM to "ansi"
6149 mterm-ansi|ANSI emulation,
6152 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6153 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6154 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
6155 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6156 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
6157 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
6158 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
6159 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
6160 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
6161 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
6163 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6164 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6165 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m,
6166 smul=\E[4m, vpa=\E[%i%p1%dd,
6167 # mterm normally sets $TERM to "mterm"
6168 mterm|mouse-sun|Der Mouse term,
6171 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S,
6172 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
6173 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W,
6174 rmir=^O, rmso=^T, smir=^Q, smso=^V,
6175 # "mterm -type decansi" sets $TERM to "decansi"
6177 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
6178 decansi|ANSI emulation with DEC compatibility hacks,
6179 am, mir, msgr, xenl,
6180 colors#8, it#8, pairs#64,
6181 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6182 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6183 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
6184 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
6185 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6186 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6187 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
6188 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
6189 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
6190 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
6191 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
6192 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
6193 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6194 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6195 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
6196 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
6197 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
6198 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
6199 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
6200 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
6201 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6202 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
6203 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6204 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6205 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
6206 u7=\E[6n, vpa=\E[%i%p1%dd,
6209 # http://vwm.sourceforge.net/
6211 # VWM 2.0.2 (2009-05-01)
6212 # vwmterm is a terminal emulator written for the VWM console window manager.
6213 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
6215 am, bce, ccc, mir, msgr, npc, xenl, xon,
6217 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6218 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6219 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD,
6220 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
6221 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
6222 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
6223 home=\E[H, il1=\E[L, ind=\n, invis=\E[8m, kcub1=\E[D,
6224 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6225 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
6226 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
6227 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6228 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
6229 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
6230 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6231 sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
6232 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
6233 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
6234 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
6238 # MGR is a Bell Labs window system lighter-weight than X.
6239 # These entries describe MGR's xterm-equivalent.
6240 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
6243 mgr|Bellcore MGR (non X) window system terminal emulation,
6245 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
6246 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
6247 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
6248 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
6249 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
6250 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
6251 il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
6252 kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S,
6253 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
6255 mgr-sun|Mgr window with Sun keyboard,
6256 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
6257 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
6258 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
6259 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
6260 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
6261 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
6262 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
6263 mgr-linux|Mgr window with Linux keyboard,
6264 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
6265 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
6266 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
6267 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6268 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
6273 st|stterm| simpleterm,
6277 # dim is intermittent, sometimes works, sometimes does not
6278 # italics may show up with yellow color
6279 # has control cursor-keys, alt cursor-keys, still no combinations
6280 # has control pageup/down
6281 # tmux extensions, see TERMINFO EXTENSIONS in tmux(1)
6282 # Se and Ss are implemented in the source-code, but the terminfo
6283 # provided with the source is incorrect, since Se/Ss are mis-coded
6284 # as booleans rather than strings.
6285 st-0.7|simpleterm 0.7,
6288 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
6289 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
6290 kcbt@, kent@, oc=\E]104\007,
6291 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6293 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6295 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6296 %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
6297 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
6298 kDN3=\E[1;3B, kDN5=\E[1;5B, kLFT3=\E[1;3D, kLFT5=\E[1;5D,
6299 kNXT3=\E[6;3~, kNXT5=\E[6;5~, kPRV3=\E[5;3~,
6300 kPRV5=\E[5;5~, kRIT3=\E[1;3C, kRIT5=\E[1;5C,
6301 kUP3=\E[1;3A, kUP5=\E[1;5A, use=ecma+strikeout,
6306 # This version uses a table which supports a single modifier (a subset of
6307 # xterm's keys, using the same scheme). Because it supports only a single
6308 # modifier in this table, function keys f36-f48 are normally unavailable
6309 # because they are assigned to modifier-4.
6311 # The program assigns TERM to match the program name (the upstream source says
6312 # "st", but Debian renames it to "stterm").
6314 # The source includes two entries which are not useful here:
6315 # st-meta| simpleterm with meta key,
6316 # st-meta-256color| simpleterm with meta key and 256 colors,
6317 # because st's notion of "meta" does not correspond to the terminfo definition.
6318 # Rather, it acts like xterm - when the meta feature is disabled.
6321 # Added eo, removed ul -TD
6324 # implements control-modifier, but not control-shift for special keys
6325 # implements alt-modifier, but not alt-shift for special keys
6328 # http://git.suckless.org/st/log/st.info
6329 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
6330 # still has no function keys past kf36 (no combinations of modifiers)
6331 # no application keypad mode, e.g, kent.
6332 st-0.6|simpleterm 0.6,
6333 am, bce, hs, mir, msgr, npc, xenl, XT,
6334 colors#8, cols#80, it#8, lines#24, pairs#64,
6335 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
6337 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6338 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
6339 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6340 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6341 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6342 cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
6343 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
6344 enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
6345 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
6346 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
6347 invis=\E[8m, is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~,
6348 kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D,
6349 kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~,
6350 ka3=\E[5~, kb2=\EOu, kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z,
6351 kclr=\E[3;5~, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6352 kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F,
6353 kel=\E[1;2F, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
6354 kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q,
6355 kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
6356 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
6357 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
6358 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
6359 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
6360 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
6361 kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
6362 kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
6363 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
6364 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
6365 kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
6366 kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
6367 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
6368 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
6369 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
6370 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
6371 kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
6372 kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, mc4=\E[4i,
6373 mc5=\E[5i, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
6374 rmacs=\E(B, rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
6375 rmso=\E[27m, rmul=\E[24m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l,
6376 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6377 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6379 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6381 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6382 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
6383 sgr0=\E[0m, smacs=\E(0, smcup=\E[?1049h, smir=\E[4h,
6384 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6385 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
6386 vpa=\E[%i%p1%dd, Se=\E[2 q, Ss=\E[%p1%d q, use=xterm+sl,
6391 # Note: the original terminfo description uses leading blank to persuade
6392 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
6395 # Reading the code shows it should work for aixterm 16-colors
6396 # - added st-16color
6399 # - set eo (erase-overstrike)
6401 # - tbc doesn't work
6403 # - cbt doesn't work
6404 # - shifted cursor-keys send sequences like rxvt
6405 # - sgr referred to unimplemented "invis" mode.
6406 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
6407 simpleterm|old-st| simpleterm 0.1.1,
6408 am, eo, mir, msgr, ul, xenl,
6409 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
6410 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6411 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
6412 cnorm=\E[?12l\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
6413 cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6414 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6415 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
6416 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
6417 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^?,
6418 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6419 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6420 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6421 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6422 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
6423 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
6424 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6425 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6427 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
6428 st-16color|stterm-16color|simpleterm with 16-colors,
6429 use=ibm+16color, use=st,
6430 # 256 colors "works", but when running xterm's test-scripts, some garbage is
6431 # shown in the titlebar.
6433 # terminal wants to use TERM=stterm-256color, but that is longer than 14
6434 # characters, making the choice nonportable.
6435 st-256color|stterm-256color|simpleterm with 256 colors,
6437 initc@, oc@, use=xterm+256color, use=st,
6440 # https://github.com/software-jessies-org/jessies/wiki/Terminator
6442 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
6443 # Debian/current -TD (2011/8/20)
6445 # There are some packaging problems:
6446 # a) using Java, the program starts off using 50Mb, and climbs from there,
6447 # up to 114Mb after testing (no scrollback).
6448 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
6449 # (two copies, just in case the host happens to be Mac OS X).
6450 # I deleted this after testing with tack.
6452 # Issues/features found with tack:
6453 # a) tbc does not work (implying that hts also is broken).
6454 # Comparing with the tabs utility shows a problem with the last tabstop on
6456 # b) has xterm-style shifted function-key strings
6457 # meta also is used, but control is ignored.
6458 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
6460 # d) some combinations of shift/control send xterm-style sequences for
6461 # insert/delete/home/end.
6462 # e) numeric keypad sends only numbers (compare with vttest).
6463 # f) meta mode (km) is not implemented.
6465 # Issues found with ncurses test-program:
6466 # a) bce is inconsistently implemented
6467 # b) widths of Unicode values above 256 do not always agree with wcwidth.
6469 # Checked with vttest, found low degree of compatibility there.
6471 # Checked with xterm's scripts, found that the 256-color palette is fixed.
6475 # b) corrected sgr0 to reset alternate character set
6476 # c) modified smacs/rmacs to use SCS rather than SI/SO
6479 terminator|Terminator no line wrap,
6480 eo, mir, msgr, xenl, xon,
6481 colors#0x100, cols#80, it#8, lines#24, lm#0, pairs#0x10000,
6482 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6483 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
6484 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
6485 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
6486 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6487 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
6488 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6489 enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG,
6490 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
6491 is1=\E[?47l\E=\E[?1l,
6492 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
6493 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6494 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6495 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6496 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6497 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6498 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
6499 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
6500 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
6501 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6502 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
6503 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
6504 setaf=\E[38;5;%p1%dm,
6505 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t
6507 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
6508 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
6512 # https://www.enlightenment.org/about-terminology
6514 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a vt100
6515 # emulator, nor is it compatible with xterm, but it uses a few features from
6519 # cursor does not fill on focus
6520 # there are pervasive problems with clearing/erasing parts of the screen
6521 # resizing the window causes it to stop listening to the keyboard
6523 # doesn't understand vt100 CPR needed for resize
6528 # uses bce model for colors, but (see below) fails the vttest screens
6529 # has partial support for 256color feature.
6530 # tack function-keys (a subset of xterm+pcf0), and
6531 # tack cursor-keys (a subset of xterm+pce2):
6532 # ctrl+shift (ignored)
6534 # shift-alt modifier -> shift (2)
6538 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
6539 # ctrl + khome/kend works - none of the other modifiers do
6541 # spits lots of messages from termptyesc.c especially in vttest.
6542 # no 132-column mode
6543 # fails menu 1, 2 (definitely not vt100-compatible)
6544 # primary (claims vt420 with several options, apparently none work) and
6545 # secondary report says (perhaps... vt420): \E[>41;285;0c
6546 # CHA, HPR, VPA, CNL, CPL work
6547 # BCE with ED/EL - fail
6548 # BCE with ECH/indexing - fail
6550 # unlike teken, background light/dark works
6552 # X10 and Normal mouse work
6553 # Any-event mouse works
6554 # Mouse button-event works
6556 # This description uses xterm+pcf0, which is misleading because the program
6557 # does not handle combinations of modifiers - but listing them all would
6558 # involve more effort than its developers spent -TD
6559 terminology-0.6.1|EFL-based terminal emulator,
6561 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
6562 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6563 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6564 kind=\E[1;2B, kri=\E[1;2A,
6565 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
6566 %;m%?%p9%t\016%e\017%;$<2>,
6567 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
6568 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
6569 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
6570 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
6571 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
6572 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
6573 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
6574 kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
6577 # Tested terminology 1.0.0
6580 # Shifted cursor-keys send nothing, but xterm modifiers for control+shift
6581 # and control+alt were added like xterm+pcc2
6582 # Editing keys have some features from xterm+pce2
6583 # Changed from xterm+pcf0 to xterm+pcf2
6588 # Aside from the partial fixes for function/cursor/editing keys, no improvement
6589 # in other tests versus 0.6.1
6590 terminology-1.0.0|EFL-based terminal emulator,
6591 civis=\E[?25l, cnorm=\E[?12l\E[?25h, dim=\E[2m,
6592 flash=\E[?5h$<100/>\E[?5l, kend=\E[OF, khome=\E[OH,
6594 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
6595 %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>,
6596 sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics,
6597 use=xterm+x11mouse, use=xterm+pce2, use=xterm+pcf2,
6598 use=xterm+pcc2, use=terminology-0.6.1,
6600 terminology|EFL-based terminal emulator,
6601 use=terminology-1.0.0,
6603 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
6606 # Columbus UNIX virtual terminal. This terminal also appears in
6607 # UNIX 4.0 and successors as line discipline 1 (?), but is
6608 # undocumented and does not really work quite right.
6609 cbunix|cb unix virtual terminal,
6611 cols#80, lines#24, lm#0,
6612 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
6613 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
6614 el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB,
6615 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
6616 smso=\Ea^D, smul=\Ea^A,
6617 # (vremote: removed obsolete ":nl@:" -- esr)
6618 vremote|virtual remote terminal,
6620 cols#79, use=cbunix,
6622 pty|4bsd pseudo teletype,
6623 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
6624 smso=\Ea$, smul=\Ea!, use=cbunix,
6628 # https://www.emacswiki.org/emacs/AnsiTerm
6629 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
6631 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
6632 eterm|gnu emacs term.el terminal emulation,
6635 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6636 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6637 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6638 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6639 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6640 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6641 il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m,
6642 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
6643 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
6646 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
6647 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
6648 am, mir, msgr, xenl,
6649 colors#8, cols#80, lines#24, pairs#64,
6650 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6651 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6652 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6653 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6654 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6655 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6656 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kbs=^?,
6657 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6658 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
6659 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
6660 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6661 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
6662 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
6664 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
6665 u6=\E[%i%d;%dR, u7=\E[6n,
6667 # shell.el can "do" color, though not nearly as well.
6670 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
6673 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
6674 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
6675 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
6677 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
6678 # frequently. The contemporaneous term.el aka ansi-term does not "support"
6679 # italics but does not lose the color information -TD 2017/01/28.
6680 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
6682 colors#8, it#8, ncv#13, pairs#64,
6683 bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m,
6684 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6685 sgr0=\E[m, smul=\E[4m, use=ecma+italics,
6689 # Entries for use by the `screen' program by Juergen Weigert,
6690 # Michael Schroeder, Oliver Laumann. The screen and
6691 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
6692 # come from University of Wisconsin and may be older.
6693 # (screen: added <cnorm> on ANSI model -- esr)
6695 # 'screen' defines extensions to termcap. Some are used in its terminal
6697 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
6698 # AX (bool) Does understand ANSI set default fg/bg color
6699 # (\E[39m / \E[49m).
6700 # S0 (str) Switch charset 'G0' to the specified charset.
6701 # E0 (str) Switch charset 'G0' back to standard charset.
6703 # Initially tested with screen 3.09.08
6705 # According to its manual page
6707 # Screen is a full-screen window manager that multiplexes a physical
6708 # terminal between several processes (typically interactive shells). Each
6709 # virtual terminal provides the functions of a DEC VT100 terminal and, in
6710 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
6711 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
6712 # multiple character sets).
6714 # However, there is a design error in its support for video highlights. The
6715 # program uses a table (rendlist) which equates the SGR codes to terminal
6716 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
6717 # is modified only by the presence or absence of the corresponding capabilities.
6718 # Not by their values.
6720 # If screen sets the TERMCAP variable, it uses hardcoded strings which
6721 # correspond to the rendlist table.
6723 # The table gives this information:
6735 # 22 reset bold, standout and dim
6737 # 24 reset underline
6742 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
6743 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
6744 # Without some redesign of screen, it is not possible to extend the set of
6745 # capabilities. Substitution would be possible, e.g., sending italics in
6746 # place of underline.
6748 # Because screen uses hard-coded parsing, it does not check if two capabilities
6749 # use the same value. For example, changing standout to be the same as any of
6750 # the other capabilities will confuse screen. Curses applications which use
6751 # sgr are not impacted (because that usually resets all capabilities before
6752 # setting any), but termcap applications do not use sgr -TD
6753 screen|VT 100/ANSI X3.64 virtual terminal,
6754 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
6755 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
6756 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
6758 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6759 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r,
6760 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6761 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6762 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6763 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
6764 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6765 enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG,
6766 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
6767 ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^H, kcbt=\E[Z,
6768 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6769 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6770 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6771 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6772 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
6773 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6774 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
6775 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
6776 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
6777 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
6778 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
6779 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g,
6780 vpa=\E[%i%p1%dd, E0=\E(B, S0=\E(%p1%c, use=ecma+color,
6781 # The bce and status-line entries are from screen 3.9.13 (and require some
6782 # changes to .screenrc).
6783 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
6786 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
6787 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
6789 # ======================================================================
6790 # Entries for GNU Screen with 16 colors.
6791 # Those variations permit to benefit from 16 colors palette, and from
6792 # bold font and blink attribute separated from bright colors. But they
6793 # are less portable than the generic "screen" 8 color entries: Their
6794 # usage makes real sense only if the terminals you attach and reattach
6795 # do all support 16 color palette.
6797 screen-16color|GNU Screen with 16 colors,
6798 use=ibm+16color, use=screen,
6800 screen-16color-s|GNU Screen with 16 colors and status line,
6801 use=ibm+16color, use=screen-s,
6803 screen-16color-bce|GNU Screen with 16 colors and BCE,
6804 use=ibm+16color, use=screen-bce,
6806 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
6807 bce, use=ibm+16color, use=screen-s,
6809 # ======================================================================
6810 # Entries for GNU Screen 4.02 with --enable-colors256.
6812 screen-256color|GNU Screen with 256 colors,
6813 use=xterm+256setaf, use=screen,
6815 screen-256color-s|GNU Screen with 256 colors and status line,
6816 use=xterm+256setaf, use=screen-s,
6818 screen-256color-bce|GNU Screen with 256 colors and BCE,
6819 bce, use=xterm+256setaf, use=screen-bce,
6821 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
6822 bce, use=xterm+256setaf, use=screen-s,
6824 screen.xterm-256color|GNU Screen with xterm using 256 colors,
6825 use=xterm+256setaf, use=screen.xterm-new,
6827 screen.konsole-256color|GNU Screen with konsole using 256 colors,
6828 use=xterm+256setaf, use=screen.konsole,
6830 screen.vte-256color|GNU Screen with vte using 256 colors,
6831 use=xterm+256setaf, use=screen.vte,
6833 screen.putty-256color|GNU Screen with putty using 256 colors,
6834 use=xterm+256setaf, use=screen.putty,
6836 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
6837 use=xterm+256setaf, use=screen.mlterm,
6839 # ======================================================================
6841 # Read the fine manpage:
6842 # When screen tries to figure out a terminal name for
6843 # itself, it first looks for an entry named "screen.<term>",
6844 # where <term> is the contents of your $TERM variable. If
6845 # no such entry exists, screen tries "screen" (or "screen-w"
6846 # if the terminal is wide (132 cols or more)). If even this
6847 # entry cannot be found, "vt100" is used as a substitute.
6849 # Notwithstanding the manpage, screen uses its own notion of the termcap
6850 # and some keys from "screen.<term>" are ignored. Here is an entry which
6851 # covers those (tested with screen 4.00.02) -TD
6852 screen+fkeys|function-keys according to screen,
6853 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
6856 # See explanation before "screen" entry. Cancel italics so that applications
6857 # do not assume screen supports the feature. Add this tweak to entries which
6858 # extend screen for terminals which do support italics.
6859 screen+italics|screen cannot support italics,
6862 # Here are a few customized entries which are useful -TD
6865 # (a) screen does not support invis.
6866 # (b) screen's implementation of bw is incorrect according to tack.
6867 # (c) screen appears to hardcode the strings for khome/kend, making it
6868 # necessary to override the "use=" clause's values (screen+fkeys).
6869 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
6870 # which is NOT the same as the terminfo screen.<term>.
6871 # (e) when screen finds one of these customized entries, it sets $TERM to
6872 # match. Hence, no "screen.xterm" entry is provided, since that would
6873 # create heartburn for people running remote xterm's.
6874 # (f) screen does not support rep.
6876 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
6877 # since the default translations override the built-in keycode
6878 # translation. They are suppressed here to show what is tested by tack.
6879 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
6881 invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@,
6882 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6883 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
6884 E3@, use=screen+italics, use=screen+fkeys,
6885 use=xterm+x11mouse, use=xterm-new,
6886 #:screen.xterm|screen for modern xterm,
6887 #: use=screen.xterm-new,
6888 # xterm-r6 does not really support khome/kend unless it is propped up by
6889 # the translations resource.
6890 screen.xterm-r6|screen customized for X11R6 xterm,
6891 bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6,
6892 # Color applications running in screen and TeraTerm do not play well together
6893 # on Solaris because Sun's curses implementation gets confused.
6894 screen.teraterm|disable ncv in teraterm,
6896 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
6897 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
6898 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6899 use=screen+fkeys, use=xterm+x11mouse, use=screen,
6901 screen.rxvt|screen in rxvt,
6903 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6904 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
6905 use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad,
6907 screen.Eterm|screen in Eterm,
6908 use=xterm+x11mouse, use=screen+fkeys, use=Eterm,
6909 screen.mrxvt|screen in mrxvt,
6910 use=xterm+x11mouse, use=screen+fkeys, use=mrxvt,
6911 screen.vte|screen in any VTE-based terminal,
6912 use=xterm+x11mouse, use=screen+italics,
6913 use=screen+fkeys, use=vte,
6914 screen.gnome|screen in GNOME Terminal,
6915 use=xterm+x11mouse, use=screen+italics,
6916 use=screen+fkeys, use=gnome,
6917 screen.konsole|screen in KDE console window,
6918 use=xterm+x11mouse, use=screen+italics,
6919 use=screen+fkeys, use=konsole,
6920 # fix the backspace key
6921 screen.linux|screen in linux console,
6923 kbs=^?, kcbt@, use=xterm+x11mouse, use=screen+fkeys,
6925 screen.mlterm|screen in mlterm,
6926 use=xterm+x11mouse, use=screen+fkeys, use=mlterm,
6927 screen.putty|screen in putty,
6928 use=xterm+x11mouse, use=screen+fkeys, use=putty,
6930 # The default "screen" entry is reasonably portable, but not optimal for the
6931 # most widely-used terminal emulators. The "bce" capability is supported in
6932 # screen since 3.9.13, and when used, will require fewer characters to be sent
6933 # to the terminal for updates.
6935 # If you are using only terminals which support bce, then you can use this
6936 # feature in your screen configuration.
6938 # Adding these lines to your ".screenrc" file will allow using these customized
6943 screen-bce.xterm-new|screen optimized for modern xterm,
6945 ech@, use=screen+italics, use=screen.xterm-new,
6946 screen-bce.rxvt|screen optimized for rxvt,
6948 ech@, use=screen.rxvt,
6949 screen-bce.Eterm|screen optimized for Eterm,
6951 ech@, use=screen.Eterm,
6952 screen-bce.mrxvt|screen optimized for mrxvt,
6954 ech@, use=screen.mrxvt,
6955 screen-bce.gnome|screen optimized for GNOME-Terminal,
6957 ech@, use=screen+italics, use=screen.gnome,
6958 screen-bce.konsole|screen optimized for KDE console window,
6960 ech@, use=screen+italics, use=screen.konsole,
6961 screen-bce.linux|screen optimized for linux console,
6963 ech@, use=screen.linux,
6965 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
6966 cols#132, use=screen,
6968 screen2|old VT 100/ANSI X3.64 virtual terminal,
6969 cols#80, it#8, lines#24,
6970 cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H,
6971 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6972 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6973 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6974 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
6975 il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6976 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
6977 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
6978 nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
6979 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
6980 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
6981 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
6982 screen3|older VT 100/ANSI X3.64 virtual terminal,
6984 cols#80, it#8, lines#24,
6985 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
6986 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6987 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6988 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6989 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6990 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6991 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD,
6992 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
6993 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
6994 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
6995 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
6996 smul=\E[4m, tbc=\E[3g,
7000 # tmux is mostly compatible with screen, but has support for italics, and some
7001 # of the xterm cursor bits.
7003 # However, unlike screen, tmux has no provision for using derived terminal
7004 # descriptions. When screen starts, it looks for a suitable "inner" terminal
7005 # such as "screen.$TERM" to correspond to the outer terminal's quirks. The
7006 # various entries such as screen.xterm-new provide a way to more closely
7007 # match the terminal.
7008 tmux|tmux terminal multiplexer,
7009 invis=\E[8m, rmso=\E[27m,
7010 sgr=\E[0%?%p6%t;1%;%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
7011 \s\s\s\s\s\s\s\s\s\s\s\s5%;%?%p5%t;2%;m%?%p9%t\016%e
7013 smso=\E[7m, E3=\E[3J, use=ecma+italics,
7014 use=ecma+strikeout, use=xterm+edit, use=xterm+pcfkeys,
7015 use=xterm+sl, use=xterm+tmux, use=screen,
7017 tmux-256color|tmux with 256 colors,
7018 use=xterm+256setaf, use=tmux,
7023 # http://www.brain-dump.org/projects/dvtm/
7025 # + This uses ncurses to manage the display, including support for italics and
7027 # + However, default-colors are incomplete: do not set bce.
7028 # + It does not implement flash (since no \e[?5h)
7029 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
7030 # Oddly enough, if $TERM contains "linux", it attempts to set the title.
7031 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
7032 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
7034 # + It also omits the shifted cursor- and editing-keypad keys.
7035 # However, it is confused by xterm's shifted cursor- and editing-keypad keys
7036 # (and passes those through without interpretation)
7037 # and may simply pass-through rxvt's, making it appear to work.
7038 # In other cases such as kf23 and up, no pass-through is done.
7039 # + Most of the mode-settings in the initialization/reset strings are not
7040 # implemented; dvtm copies its description from rxvt.
7041 dvtm|dynamic virtual terminal manager,
7042 am, eo, mir, msgr, xenl, AX,
7043 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
7044 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7045 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7046 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
7047 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7048 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7049 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7050 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7051 enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
7052 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7053 is1=\E[?47l\E=\E[?1l,
7054 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
7055 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
7056 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
7057 kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
7058 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
7059 kel=\E[8\^, kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~,
7060 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7061 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7062 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
7063 kf21=\E[23$, kf22=\E[24$, kf3=\E[13~, kf4=\E[14~,
7064 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7065 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a,
7066 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[b, kslt=\E[4~,
7067 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
7068 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[27m,
7070 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
7071 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
7073 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
7075 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
7077 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
7078 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
7081 dvtm-256color|dynamic virtual terminal manager with 256 colors,
7082 colors#0x100, pairs#0x10000,
7083 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
7085 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
7091 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
7092 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
7093 # been maintained until recently by the National Center for Supercomputer
7094 # Applications, and it is feature rich, stable and free. It can be downloaded
7095 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
7096 # xterm+sl, and the docs at NCSA. It works well.
7098 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
7099 # The terminal options should be set as follows:
7100 # Xterm sequences ON
7101 # use VT wrap mode ON
7102 # use Emacs arrow keys OFF
7103 # CTRL-COMND is Emacs meta ON
7105 # answerback string: "ncsa-vt220-8"
7106 # setup keys: all disabled
7108 # Application mode is not used.
7110 # Other special mappings:
7117 # PAGEDOWN Next Screen
7119 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
7122 # The status-line manipulation is a mapping of the xterm-compatible control
7123 # sequences for setting the window-title. So you must use tsl and fsl in
7124 # pairs, since the latter ends the string that is loaded to the window-title.
7125 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
7126 am, km, mir, msgr, xenl,
7127 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7128 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7129 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
7130 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7131 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7132 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7133 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7134 el=\E[K, el1=\E[1K, enacs=\E)0,
7135 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
7136 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
7137 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
7138 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
7139 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7140 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
7141 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
7142 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
7143 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
7144 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
7145 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
7146 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
7147 rmso=\E[27m, rmul=\E[24m,
7148 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
7149 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
7151 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
7152 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7153 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
7154 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
7155 use=ncsa-m, use=klone+color,
7156 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
7158 dsl@, fsl@, tsl@, use=ncsa,
7159 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
7161 dsl@, fsl@, tsl@, use=ncsa-m,
7163 # The documented function-key mapping refers to the Apple Extended Keyboard
7164 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
7165 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
7166 # some keyboards and many applications require these as F1-F4.
7168 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
7169 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
7170 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
7171 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
7172 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
7173 kf8=\E[19~, kf9=\E[20~, use=ncsa,
7175 #### Pilot Pro Palm-Top
7177 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
7178 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
7179 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
7182 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
7183 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
7184 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s,
7187 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
7188 # These entries are for the Embeddable Linux Kernel System (ELKS)
7189 # project - an heavily stripped down Linux to be run on 16 bit
7190 # boxes or, eventually, to be used in embedded systems - and have been
7191 # adapted from the stock ELKS termcap. The project itself looks stalled,
7192 # and the latest improvements I know of date back to March 2000.
7194 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
7195 # as an added bonus, this deals with all the capabilities common to
7196 # both VT52 and ANSI (or, eventually, "special") modes.
7198 elks-glasstty|ELKS glass-TTY capabilities,
7200 cols#80, it#8, lines#25,
7201 bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
7204 elks-vt52|ELKS vt52 console,
7205 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
7206 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
7207 home=\EH, use=elks-glasstty,
7209 elks-ansi|ELKS ANSI console,
7210 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7211 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7212 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
7214 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
7215 # instead of VT52, but the "elks" entry still refers to the latter.
7217 elks|default ELKS console,
7220 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
7221 # one but in screen size
7223 sibo|ELKS SIBO console,
7224 cols#61, it#8, lines#20, use=elks-vt52,
7226 ######## COMMERCIAL WORKSTATION CONSOLES
7232 # This is from the OSF/1 Release 1.0 termcap file
7233 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
7236 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7237 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
7238 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
7239 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
7240 nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
7245 # :is1: resets scrolling region in case a previous user had used "tset vt100"
7246 oldsun|Sun Microsystems Workstation console,
7247 OTbs, am, km, mir, msgr,
7248 cols#80, it#8, lines#34,
7249 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
7250 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7251 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
7252 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7253 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7254 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
7255 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
7256 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
7257 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
7258 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
7259 sun-il|Sun Microsystems console with working insert-line,
7262 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7263 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7264 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
7265 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
7266 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7267 kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z,
7268 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
7269 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
7270 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
7271 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
7272 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
7273 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
7274 smso=\E[7m, u8=\E[1t, u9=\E[11t,
7275 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
7276 # flake out on the last line. Unfortunately, without them the terminal has no
7278 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
7279 il@, il1@, use=sun-il,
7280 # If you are using an SS5, change the sun definition to use sun-ss5.
7281 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
7284 sun+sl|Sun Workstation window status line,
7286 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
7288 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
7289 sun-s|Sun Microsystems Workstation window with status line,
7291 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
7292 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
7294 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
7295 sun-48|Sun 48-line window,
7296 cols#80, lines#48, use=sun,
7297 sun-34|Sun 34-line window,
7298 cols#80, lines#34, use=sun,
7299 sun-24|Sun 24-line window,
7300 cols#80, lines#24, use=sun,
7301 sun-17|Sun 17-line window,
7302 cols#80, lines#17, use=sun,
7303 sun-12|Sun 12-line window,
7304 cols#80, lines#12, use=sun,
7305 sun-1|Sun 1-line window for sysline,
7308 dsl=^L, fsl=\E[K, tsl=\r, use=sun,
7309 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
7310 ich1@, rmir@, smir@, use=sun,
7311 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
7313 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
7314 sun-type4|Sun Workstation console with type 4 keyboard,
7315 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
7316 kcuu1=\E[215z, use=sun-il,
7318 # Most of the current references to sun-color are from users wondering why this
7319 # is the default on install. Details from reading the wscons manpage, adding
7320 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
7321 # when those were added -TD (2005-05-28)
7323 # According to wscons manpage, color is supported only on IA systems.
7324 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
7325 # does not list these. It also sets ncv#3, however that corresponds to
7326 # underline and standout.
7328 # Since the documentation and terminfo do not agree, see also current code at
7329 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
7331 # That (actually a different driver which "supports" sun-color) also supports
7338 # It supports bold, but not underline -TD (2009-09-19)
7339 sun-color|Sun Microsystems Workstation console with color support (IA systems),
7340 colors#8, ncv#3, pairs#64,
7341 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
7342 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
7343 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7344 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7346 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
7348 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
7349 smso=\E[7m, use=sun,
7354 # (wsiris: this had extension capabilities
7355 # :HS=\E7F2:HE=\E7F7:\
7356 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
7357 # See the note on Iris extensions near the end of this file.
7358 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
7359 # <flash> from BRL -- esr)
7360 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
7361 OTbs, OTnc, OTpt, am,
7362 OTkn#3, cols#80, it#8, lines#40,
7363 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
7364 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
7365 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
7366 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
7367 ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
7368 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
7369 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
7370 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
7375 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
7376 # environment). Note: these have nothing to do with Sony's News workstation
7380 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
7381 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
7382 psterm|psterm-basic|NeWS psterm-80x34,
7383 OTbs, am, hs, km, ul,
7384 cols#80, it#8, lines#34,
7385 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
7386 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
7387 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
7388 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
7389 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
7390 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
7391 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
7393 psterm-96x48|NeWS psterm 96x48,
7394 cols#96, lines#48, use=psterm,
7395 psterm-90x28|NeWS psterm 90x28,
7396 cols#90, lines#28, use=psterm,
7397 psterm-80x24|NeWS psterm 80x24,
7398 cols#80, lines#24, use=psterm,
7399 # This is a faster termcap for psterm. Warning: if you use this termcap,
7400 # some control characters you type will do strange things to the screen.
7401 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
7402 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
7403 OTbs, am, hs, km, ul,
7404 cols#80, it#8, lines#34,
7405 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
7406 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
7407 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
7408 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7409 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
7410 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
7411 smso=^Oo, smul=^Ou, tsl=^Ol,
7415 # Use `glasstty' for the Workspace application
7418 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
7421 cols#80, it#8, lines#24,
7422 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7423 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7424 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
7425 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
7426 nextshell|NeXT Shell application,
7429 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H,
7432 #### Sony NEWS workstations
7435 # (news-unk: this had :KB=news: -- esr)
7436 news-unk|SONY NEWS vt100 emulator common entry,
7437 OTbs, OTpt, am, xenl,
7439 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
7440 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
7441 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
7442 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
7443 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
7444 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
7445 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
7446 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
7447 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
7448 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
7449 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
7450 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
7452 # (news-29: this had :TY=ascii: --esr)
7453 news-29|SONY NEWS vt100 emulator with 29 lines,
7454 lines#29, use=news-unk,
7455 # (news-29-euc: this had :TY=euc: --esr)
7456 news-29-euc|SONY NEWS vt100 emulator with 29 lines and EUC,
7458 # (news-29-sjis: this had :TY=sjis: --esr)
7459 news-29-sjis|SONY NEWS vt100 emulator with 29 lines and SJIS,
7462 # (news-33: this had :TY=ascii: --esr)
7463 news-33|SONY NEWS vt100 with 33 lines,
7464 lines#33, use=news-unk,
7465 # (news-33-euc: this had :TY=euc: --esr)
7466 news-33-euc|SONY NEWS vt100 with 33 lines and EUC,
7468 # (news-33-sjis: this had :TY=sjis: --esr)
7469 news-33-sjis|SONY NEWS vt100 with 33 lines and SJIS,
7472 # (news-42: this had :TY=ascii: --esr)
7473 news-42|SONY NEWS vt100 with 42 lines,
7474 lines#42, use=news-unk,
7475 # (news-42-euc: this had :TY=euc: --esr)
7476 news-42-euc|SONY NEWS vt100 with 42 lines and EUC,
7478 # (news-42-sjis: this had :TY=sjis: --esr)
7479 news-42-sjis|SONY NEWS vt100 with 42 lines and SJIS,
7482 # NEWS-OS old termcap entry
7484 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
7485 news-old-unk|SONY NEWS vt100 emulator common entry,
7486 OTbs, OTpt, am, xenl,
7488 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
7489 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
7490 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
7491 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
7492 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
7493 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
7494 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
7495 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7496 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
7498 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
7499 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
7502 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
7506 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
7507 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
7509 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
7512 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
7513 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
7516 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
7520 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
7521 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
7524 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
7528 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
7529 # also the alias vt100-bm.
7530 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
7533 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
7537 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
7538 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
7541 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
7545 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
7546 news28|sony vt100 emulator 28 lines,
7549 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
7553 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
7554 news29|news28-a|sony vt100 emulator 29 lines,
7556 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
7560 # (news511: this had :TY=sjis: --esr)
7561 nwp511|nwp-511|nwp-511 vt100,
7562 OTbs, OTpt, am, xenl,
7564 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7565 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
7566 ed=\E[J$<30/>, el=\E[K$<3/>,
7567 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
7568 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
7569 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
7570 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
7571 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
7572 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
7573 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
7574 # (news517: this had :TY=sjis:. --esr)
7575 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
7578 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7579 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
7580 tsl=\E[1$}\E[;%df, use=vt200,
7581 # (news517-w: this had :TY=sjis:. --esr)
7582 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
7585 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7586 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7587 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7588 tsl=\E[1$}\E[;%df, use=vt200,
7590 #### Common Desktop Environment
7593 # This ships with Sun's CDE in Solaris 2.5
7594 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
7595 dtterm|CDE desktop terminal,
7596 am, mir, msgr, xenl, xon,
7597 cols#80, it#8, lines#24, lm#0, ncv@,
7598 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7599 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7600 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
7601 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7602 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7603 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7604 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7605 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7606 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
7607 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7608 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
7609 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7610 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
7611 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
7612 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
7613 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
7614 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7615 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
7616 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
7617 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
7619 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7620 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7621 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
7622 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
7624 ######## Non-Unix Consoles
7627 #### EMX termcap.dat compatibility modes
7629 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
7630 # no_color_video to inform the application that standout(1), underline(2)
7631 # reverse(4) and invisible(64) don't work with color.
7632 emx-base|DOS special keys,
7635 bel=^G, use=ansi.sys,
7637 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
7638 # a Unix-style environment used on OS/2. (Note that the suffix makes some
7639 # names longer than 14 characters, the nominal maximum).
7641 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
7642 ansi-emx|ANSI.SYS color,
7643 am, bce, eo, mir, msgr, xon,
7644 colors#8, cols#80, it#8, lines#25, pairs#64,
7645 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7646 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H,
7647 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7648 dch=\E[%p1%dp, ed=\E[J, el=\E[K,
7649 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
7650 ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kbs=^H, kf0=\0D,
7651 kll=\0O, kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l,
7652 rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
7653 rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
7654 setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
7655 smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
7656 tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=emx-base,
7657 # nice colors for Emacs (white on blue, mode line white on cyan)
7658 ansi-color-2-emx|ANSI.SYS color 2,
7659 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
7660 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
7661 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
7662 smul=\E[1;36;44m, use=ansi-emx,
7663 # nice colors for Emacs (white on black, mode line black on cyan)
7664 ansi-color-3-emx|ANSI.SYS color 3,
7665 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
7666 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
7667 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
7668 smul=\E[0;36;40m, use=ansi-emx,
7669 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
7671 cols#80, it#8, lines#24,
7672 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7673 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7674 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
7675 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
7676 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
7677 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m,
7682 # Use this for cygwin32 (tested with beta 19.1)
7683 # underline is colored bright magenta
7684 # shifted kf1-kf12 are kf11-kf22
7685 cygwinB19|ANSI emulation for cygwin32,
7686 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7687 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7688 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7689 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7690 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7691 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7692 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
7695 # Use this for cygwin (tested with version 1.1.0).
7696 # I've combined pcansi and linux. Some values of course were different and
7697 # I've indicated which of these were and which I used.
7698 # Cheers, earnie_boyd@yahoo.com
7699 # several changes based on running with tack and comparing with older entry -TD
7700 # more changes from csw:
7702 # remove eo [erase overstrike with blank]
7703 # change clear was \E[H\E[J now \E[2J (faster?)
7706 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
7708 # add cub [cursor back param]
7709 # add cuf [cursor forward param]
7710 # add cuu [cursor up param]
7711 # add cud [cursor down param]
7712 # add hs [has status line]
7713 # add fsl [return from status line]
7714 # add tsl [go to status line]
7715 # add smacs [Start alt charset] (not sure if this works)
7716 # add rmacs [End alt charset] (ditto)
7717 # add smcup [enter_ca_mode] (save console; thanks Corinna)
7718 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
7719 # add kb2 [center of keypad]
7720 # add u8 [user string 8] \E[?6c
7721 # add el [clear to end of line] \E[K
7723 # cnorm [make cursor normal] not implemented
7724 # flash [flash] not implemented
7725 # blink [blink] not implemented very usefully in cygwin? \E[5m
7726 # dim [dim] not implemented very usefully in cygwin? \E[2m
7727 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
7728 # kNXT [shifted next key] not implemented
7729 # kPRV [shifted prev key] not implemented
7730 # khome [home key] really is \E[1~ NOT \E[H
7731 # tbc [clear tab stops] not implemented
7732 # xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
7733 # smpch [Start PC charset] is \E[11m, same as smacs
7734 # rmpch [End PC charset] is \E[10m, same as rmacs
7735 # mir [move in insert mode] fails in tack?
7736 # bce [back color erase] causes problems with change background color?
7737 # cvvis [make cursor very visible] causes a stackdump when testing with
7738 # testcurs using the output option? \E[?25h\E[?8c
7739 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
7740 # ech [erase characters param] broken \E[%p1%dX
7741 # kcbt [back-tab key] not implemented in cygwin? \E[Z
7744 # Remove cbt since it does not work in current cygwin
7745 # Add 'mir' and 'in' flags based on tack
7746 cygwin|ANSI emulation for Cygwin,
7747 am, hs, mir, msgr, xon,
7748 colors#8, it#8, pairs#64,
7749 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7750 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7751 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7752 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD,
7753 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7754 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7755 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7756 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
7757 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
7758 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G,
7759 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7760 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7761 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7762 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7763 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7764 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7765 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
7766 nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
7767 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
7768 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
7769 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7770 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
7771 %t;8%;%?%p9%t;11%;m,
7772 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
7773 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
7774 vpa=\E[%i%p1%dd, use=vt102+enq,
7776 # I've supplied this so that you can help test new values and add other
7777 # features. Cheers, earnie_boyd@yahoo.com.
7779 # Some features are from pcansi. The op value is from linux. Function-keys
7780 # are from linux. These have been tested not to cause problems. xenl was in
7781 # this list, but DOES cause problems so it has been removed
7782 cygwinDBG|Debug Version for Cygwin,
7783 am, eo, mir, msgr, xon,
7784 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
7785 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7786 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7787 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7788 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
7789 cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
7790 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7791 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7792 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7793 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7794 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
7795 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7796 il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
7797 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
7798 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
7799 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7800 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7801 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
7802 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7803 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7804 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n, op=\E[39;49m,
7805 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
7806 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
7807 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7808 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7809 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
7810 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
7811 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
7816 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
7817 # encodings used by other x86 environments. All others are invented for DJGPP.
7818 # Oddly enough, while several combinations of modifiers are tabulated, there is
7819 # none for shifted cursor keys.
7871 # Ctrl-Delete \E[43~
7872 # Ctrl-Down Arrow \E[38~
7875 # Ctrl-Insert \E[42~
7876 # Ctrl-Left Arrow \E[39~
7877 # Ctrl-Page Down \E[46~
7878 # Ctrl-Page Up \E[45~
7879 # Ctrl-Right Arrow \E[40~
7880 # Ctrl-Up Arrow \E[37~
7896 # Alt-Down Arrow \E[60~
7900 # Alt-Left Arrow \E[61~
7901 # Alt-Page Down \E[68~
7902 # Alt-Page Up \E[67~
7903 # Alt-Right Arrow \E[62~
7904 # Alt-Up Arrow \E[59~
7933 djgpp|ANSI emulation for DJGPP alpha,
7934 am, bce, msgr, xhp, xon, xt,
7935 colors#8, it#8, pairs#64,
7936 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7937 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7938 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7939 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7940 clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H,
7941 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7942 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7943 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7944 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7945 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
7946 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7947 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
7948 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
7949 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
7950 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
7951 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7952 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=\r\n,
7953 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
7954 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7955 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
7956 %p6%t;1%;%?%p7%t;8%;m,
7957 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
7959 djgpp203|Entry for DJGPP 2.03,
7961 cols#80, it#8, lines#25,
7962 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
7965 djgpp204|Entry for DJGPP 2.04,
7967 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
7968 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7969 clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD,
7970 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7971 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7972 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
7973 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
7974 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7975 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
7976 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7977 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
7978 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7979 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7980 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=\r\n, rev=\E[7m,
7981 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
7982 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7986 # This is tested using U/Win's telnet. Scrolling is omitted because it is
7987 # buggy. Another odd bug appears when displaying "~" in alternate character
7988 # set (the emulator spits out error messages). Compare with att6386 -TD
7989 uwin|U/Win 3.2 console,
7990 am, eo, in, msgr, xenl, xon,
7991 colors#8, it#8, ncv#58, pairs#64,
7992 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
7993 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
7994 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
7995 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7996 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
7997 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7998 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
7999 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
8000 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
8001 kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y, kf1=\EOP,
8002 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
8003 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
8004 khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m, rc=\E8,
8005 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
8006 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
8007 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
8008 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
8009 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
8011 #### Microsoft (miscellaneous)
8013 # This entry fits the Windows NT console when the _POSIX_TERM environment
8014 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
8015 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
8016 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
8017 # systems is not, and (surprise!) they match very well.
8019 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
8020 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
8021 # are the installation instructions a pile of mind-numbing bureaucratese,
8022 # but the termcap entry is actually broken and unusable as given; the :do:
8023 # capability is misspelled "d".
8025 # To use this, you need to a bunch of environment variables:
8027 # SET _POSIX_TERM=on
8029 # SET TERMCAP=location of termcap file in POSIX file format
8030 # which is case-sensitive.
8031 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
8034 # Important note: setting the TMP environment variable in POSIX style renders
8035 # it incompatible with a lot of other applications, including Visual C++. So
8036 # you should have a separate command window just for vi. All the other
8037 # variables may be permanently set in the Control Panel\System applet.
8039 # You can find out more about the restrictions of this facility at
8040 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
8042 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
8043 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
8045 cols#80, it#8, lines#25,
8046 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
8047 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
8048 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
8049 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
8050 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
8051 # From: jew@venus.sunquest.com
8052 # Date: 19 Feb 93 23:41:07 GMT
8053 # Here's a combination of ansi and vt100 termcap
8054 # entries that works nearly perfectly for me
8055 # (Gateway 2000 Handbook and Microsoft Works 3.0):
8056 pcmw|PC running Microsoft Works,
8058 cols#80, it#8, lines#24, vt#3,
8059 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
8060 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
8061 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
8062 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
8063 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
8064 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
8065 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
8066 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
8067 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
8068 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8069 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
8072 # From: Federico Bianchi
8073 # This is the entry for the OpenNT terminal.
8074 # The ntconsole name is for backward compatibility.
8075 # This is for OpenNT 2.0 and later.
8076 # Later OpenNT was renamed to Interix.
8078 # Presently it is distributed by Microsoft as Services For Unix (SFU).
8079 # The 3.5 beta contained ncurses 4.2 (that is header files and executables,
8080 # the documentation dated from 1.9.9e) -TD
8082 # For a US keyboard, with 12 function-kecbt=\E[Z, ys,
8083 # kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z,
8084 # kf13-kf24 use the shift-key
8085 # kf25-kf36 use the left alt-key
8086 # kf37-kf38 use the control-key
8087 # kf49-kf60 use the shift- and control-keys
8088 # The shifted cursor keys send the sequences originally used for kf61-kf64:
8091 # left=\EF^ (unassigned)
8094 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
8096 cols#80, it#8, lines#25,
8097 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
8098 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
8099 \301w\302x\263y\363z\362{\343|\330}\234~\376,
8100 bel=^G, bold=\E[1m, clear=\E[2J, cr=\r, cub=\E[%p1%dD,
8101 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
8102 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
8103 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
8104 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
8105 indn=\E[%p1%dS, kLFT=\EF\^, kRIT=\EF$, kbs=^H, kcbt=\E[Z,
8106 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
8107 kend=\E[U, kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB,
8108 kf12=\EFC, kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG,
8109 kf17=\EFH, kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK,
8110 kf21=\EFL, kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP,
8111 kf26=\EFQ, kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3,
8112 kf30=\EFU, kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY,
8113 kf35=\EFZ, kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd,
8114 kf4=\EF4, kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh,
8115 kf44=\EFi, kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn,
8116 kf49=\EFo, kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr,
8117 kf53=\EFs, kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw,
8118 kf58=\EFx, kf59=\EFy, kf6=\EF6, kf60=\EFz, kf7=\EF7,
8119 kf8=\EF8, kf9=\EF9, khome=\E[H, kich1=\E[L, kind=\EF+,
8120 kll=\E[U, knp=\E[T, kpp=\E[S, kri=\EF-, ll=\E[U, nel=\r\n,
8121 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
8122 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
8123 sc=\E[s, setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
8124 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
8125 use=ansi+rep, use=klone+color,
8127 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
8128 lines#35, use=opennt,
8130 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
8131 lines#50, use=opennt,
8133 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
8134 lines#60, use=opennt,
8136 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
8137 lines#100, use=opennt,
8139 # OpenNT wide terminals
8140 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
8141 cols#125, use=opennt,
8143 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
8144 lines#35, use=opennt-w,
8146 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
8147 lines#50, use=opennt-w,
8149 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
8150 lines#60, use=opennt-w,
8152 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
8153 cols#132, use=opennt,
8155 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
8156 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
8157 rmcup@, smcup@, use=opennt,
8159 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
8160 lines#35, use=opennt-nti,
8162 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
8163 lines#50, use=opennt-nti,
8165 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
8166 lines#60, use=opennt-nti,
8168 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
8169 lines#100, use=opennt-nti,
8171 ######## COMMON TERMINAL TYPES
8173 # This section describes terminal classes and maker brands that are still
8174 # quite common, but have proprietary command sets not blessed by ANSI.
8179 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
8180 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
8181 # Acer has a web site at http://www.acer.com.
8183 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
8184 # His comments suggest they were shipped with the system.
8187 # (altos2: had extension capabilities
8188 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8189 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8190 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8191 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8192 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
8193 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
8194 # :HL=^AP\r:SP=\E[i:\
8195 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
8196 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
8197 # Comparison with the k* capabilities makes it obvious that the c* things are
8198 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
8199 # :sr: was given as a boolean-- esr)
8200 altos2|alt2|altos-2|altos II,
8201 cols#80, it#8, lines#24, xmc#0,
8202 clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
8203 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
8204 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
8205 if=/usr/share/tabset/vt100, il1=\E[L, ind=\n,
8206 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
8207 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
8208 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
8209 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
8210 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
8211 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
8212 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8213 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
8214 nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
8215 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
8216 # (altos3: had extension capabilities
8217 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8218 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8219 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8220 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8221 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
8222 # :HL=^AP\r:SP=\E[i:\
8223 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
8224 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
8225 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
8226 altos4|alt4|altos-4|altos IV,
8228 # (altos7: had extension capabilities:
8229 # :GG#0:GI=\EH8:GF=\EH7:\
8230 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
8231 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
8232 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
8233 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
8234 # Comparison with the k* capabilities makes it obvious that the c* things are
8235 # shift keys. I have renamed them to keys 32 and up accordingly. I have
8236 # also made this entry relative to adm12 in order to give it an <sgr>. The
8237 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
8238 altos7|alt7|altos VII,
8240 cols#80, lines#24, xmc#0,
8241 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
8242 clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8243 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8244 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
8246 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
8247 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
8248 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
8249 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
8250 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
8251 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
8252 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
8253 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
8254 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
8255 rmir=\Er, smir=\Eq, use=adm+sgr,
8256 altos7pc|alt7pc|altos PC VII,
8257 kend=\ET, use=altos7,
8259 #### Hewlett-Packard (hp)
8262 # 8000 Foothills Blvd
8263 # Roseville, CA 95747
8264 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
8265 # 1-(800)-633-3600 (General customer support)
8268 # As of March 1998, HP no longer has any terminals in production.
8269 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
8270 # supported (they still have parts). So are the 2392a and 2394a.
8271 # See the WORKSTATION CONSOLES section for the 700s.
8274 # Generic HP terminal - this should (hopefully) work on any HP terminal.
8275 hpgeneric|hp|hewlett-packard generic terminal,
8276 OTbs, OTpt, am, da, db, mir, xhp,
8277 cols#80, lines#24, lm#0, vt#6,
8278 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8279 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
8280 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
8281 ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
8282 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
8285 hp110|hewlett-packard model 110 portable,
8286 lines#16, use=hpgeneric,
8288 hp+pfk+cr|hp function keys with CR,
8289 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
8290 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
8292 hp+pfk-cr|hp function keys w/o CR,
8293 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
8296 # The hp2621s use the same keys for the arrows and function keys,
8297 # but not separate escape sequences. These definitions allow the
8298 # user to use those keys as arrow keys rather than as function
8300 hp+pfk+arrows|hp alternate arrow definitions,
8301 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
8302 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
8303 kll=\Eq\r, kri=\Es\r,
8305 hp+arrows|hp arrow definitions,
8306 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8307 kind=\ES, kll=\EF, kri=\ET,
8309 # Generic stuff from the HP 262x series
8311 hp262x|HP 262x terminals,
8313 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
8314 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8315 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
8316 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
8317 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
8318 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
8319 %;%?%p4%t%{65}%|%;%c,
8320 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
8322 # Note: no <home> on HPs since that homes to top of memory, not screen.
8323 # Due to severe 2621 braindamage, the only way to get the arrow keys to
8324 # transmit anything at all is to turn on the function key labels
8325 # with <smkx>, and even then the user has to hold down shift!
8326 # The default 2621 turns off the labels except when it has to to
8327 # enable the function keys. If your installation prefers labels
8328 # on all the time, or off all the time (at the "expense" of the
8329 # function keys), use 2621-nl or 2621-wl.
8331 # Note: there are newer ROMs for 2621's that allow you to set
8332 # strap A so the regular arrow keys xmit \EA, etc, as with the
8333 # 2645. However, even with this strap set, the terminal stops
8334 # xmitting if you reset it, until you unset and reset the strap!
8335 # Since there is no way to set/unset the strap with an escape
8336 # sequence, we don't use it in the default.
8337 # If you like, you can use 2621-ba (brain-damaged arrow keys).
8338 hp2621-ba|2621 w/new rom and strap A set,
8339 rmkx@, smkx@, use=hp+arrows, use=hp2621,
8341 # hp2621 with function labels. Most of the time they are off,
8342 # but inside vi, the function key labels appear. You have to
8343 # hold down shift to get them to xmit.
8344 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
8345 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
8349 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
8350 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
8351 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
8352 use=hp+pfk+cr, use=hpgeneric,
8354 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
8355 hp2621p|hp 2621 with printer,
8356 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
8358 hp2621p-a|hp2621p with fn as arrows,
8359 use=hp+pfk+arrows, use=hp2621p,
8361 # hp2621 with k45 keyboard
8362 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
8363 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
8364 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
8366 # 2621 using all 48 lines of memory, only 24 visible at any time.
8367 hp2621-48|48 line 2621,
8369 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
8372 # 2621 with no labels ever. Also prevents vi delays on escape.
8373 hp2621-nl|hp 2621 with no labels,
8374 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
8377 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
8380 hp2621-nt|hp 2621 w/no tabs,
8383 # Hp 2624 B with 4 or 10 pages of memory.
8385 # Some assumptions are made with this entry. These settings are
8386 # NOT set up by the initialization strings.
8388 # Port Configuration
8393 # Terminal Configuration
8399 # Note: the 2624 DOES have a true <home>, believe it or not!
8401 # The 2624 has an "error line" to which messages can be sent.
8402 # This is CLOSE to what is expected for a "status line". However,
8403 # after a message is sent to the "error line", the next carriage
8404 # return is EATEN and the "error line" is turned back off again!
8405 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
8407 # This entry supports emacs (and any other program that uses raw
8408 # mode) at 4800 baud and less. I couldn't get the padding right
8411 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
8412 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
8415 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
8417 # This hp2626 entry does not use any of the fancy windowing stuff
8420 # Indeed, terminfo does not yet handle such stuff. Since changing
8421 # any window clears memory, it is probably not possible to use
8422 # this for screen opt.
8424 # ed is incredibly slow most of the time - I am guessing at the
8425 # exact padding. Since the terminal uses xoff/xon this is intended
8426 # only for cost computation, so that the terminal will prefer el
8427 # or even dl1 which is probably faster!
8429 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
8430 # extra slow on the last line of the window.
8432 # The padding probably should be changed.
8434 hp2626|hp2626a|hp2626p|hp 2626,
8437 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
8438 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
8439 use=hp+labels, use=scrhp,
8441 # This entry is for sysline. It allocates a 23 line window with
8442 # a 115 line workspace for regular use, and a 1 line window for
8445 # This assumes port 2 is being used.
8446 # Turn off horizontal line, Create ws #1 with 115 lines,
8447 # Create ws #2 with 1 line, Create window #1 lines 1-23,
8448 # Create window #2 lines 24-24, Attach cursor to workspace #1.
8449 # Note that this clears the tabs so it must be done by tset before
8452 hp2626-s|hp 2626 using only 23 lines,
8455 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
8456 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
8457 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
8458 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
8459 # Force terminal back to 24 lines after being 23.
8460 hp2626-ns|hp 2626 using all 24 lines,
8461 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
8462 \s\E&w3f2I\s\E&w7f2p1I\s\r,
8464 # Various entries useful for small windows on 2626.
8465 hp2626-12|hewlett-packard 2626 12 lines,
8466 lines#12, use=hp2626,
8467 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
8468 cols#40, lines#12, use=hp2626,
8469 hp2626-x40|hewlett-packard 2626 40 columns,
8470 cols#40, use=hp2626,
8471 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
8472 lines#11, use=hp2626-s,
8475 # hp2627 color tubes from University of Wisconsin
8477 hp2627a-rev|hp 2627 with reverse video colors,
8478 cr=\r, cud1=\n, ht=^I, ind=\n,
8479 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
8481 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
8482 smul=\E&dD\E&v1S, use=hp2621-nl,
8483 hp2627a|hp 2627 color terminal with no labels,
8484 cr=\r, cud1=\n, ht=^I, ind=\n,
8485 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
8486 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
8487 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
8489 hp2627c|hp 2627 color (cyan) terminal with no labels,
8490 cr=\r, cud1=\n, ht=^I, ind=\n,
8491 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
8492 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a,
8494 # hp2640a doesn't have the Y cursor addressing feature, and C is
8495 # memory relative instead of screen relative, as we need.
8498 cup@, rmkx@, smkx@, use=hp2645,
8500 hp2640b|hp2644a|hp 264x series,
8501 rmkx@, smkx@, use=hp2645,
8503 # (hp2641a: removed unknown :gu: -- esr)
8504 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
8505 am, da, db, mir, xhp,
8507 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8508 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
8509 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
8510 if=/usr/share/tabset/std, il1=\EL, ind=\n,
8511 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
8512 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
8515 # This terminal should be used at 4800 baud or less. It needs padding for
8516 # plain characters at 9600, I guessed at an appropriate cr delay. It really
8517 # wants ^E/^F handshaking, but that doesn't work well even if you write
8518 # software to support it.
8519 hp2645|hp45|HP 2645 series,
8521 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
8522 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8523 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
8524 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
8526 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
8527 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
8528 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
8529 # You should use this terminal at 4800 baud or less.
8530 hp2648|hp2648a|HP 2648a graphics terminal,
8531 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
8532 dch1=\EP$<7>, ip=$<5>, use=hp2645,
8534 # The HP 150 terminal is a fairly vanilla HP terminal, with the
8535 # clreol standout problem. It also has graphics capabilities and
8536 # a touch screen, which we don't describe here.
8537 hp150|hewlett packard Model 150,
8540 # HP 2382a terminals, "the little ones." They don't have any
8541 # alternate character set support and sending out ^N/^O will
8542 # leave the screen blank.
8543 hp2382a|hp2382|hewlett packard 2382a,
8547 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8550 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8551 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8552 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8554 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
8556 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
8557 use=hp+pfk+arrows, use=hp2621-fl,
8559 # newer hewlett packard terminals
8561 newhpkeyboard|generic entry for HP extended keyboard,
8562 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8563 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
8564 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
8565 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
8568 newhp|generic entry for new hewlett packard terminals,
8569 am, bw, mir, xhp, xon,
8570 cols#80, lines#24, pb#4800,
8571 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRm
8573 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H,
8574 cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
8575 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n,
8576 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n,
8577 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
8578 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
8579 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
8580 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
8581 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8582 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8583 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8584 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
8585 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
8586 tbc=\E3, use=newhpkeyboard,
8588 memhp|memory relative addressing for new HP ttys,
8590 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
8591 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
8592 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
8593 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
8595 scrhp|screen relative addressing for new HP ttys,
8596 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
8597 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
8598 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
8599 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
8600 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
8602 # (hp+labels: added label values from a BRL termcap -- esr)
8603 hp+labels|"standard" label info for new HP ttys,
8605 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
8606 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8608 rmln=\E&j@, smln=\E&jB,
8610 hp+printer|"standard" printer info for HP ttys,
8611 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
8614 # The new hp2621b is kind of a cross between the old 2621 and the
8615 # new 262x series of machines. It has dip-switched options.
8616 # The firmware has a bug in it such that if you give it a null
8617 # length label, the following character is eaten!
8618 hp2621b|hp 2621b with old style keyboard,
8619 lh#1, lm#48, lw#8, nlab#8,
8620 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8621 kind=\ET, kll=\EF, kri=\ES,
8622 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
8623 %;%p2%s\E%{111}%p1%+%c\r,
8624 smln=\E&jB, use=hp2621,
8626 hp2621b-p|hp 2621b with printer,
8627 use=hp+printer, use=hp2621b,
8629 # hp2621b - new 2621b with new extended keyboard
8630 # these are closer to the new 26xx series than the other 2621b
8631 hp2621b-kx|hp 2621b with extended keyboard,
8632 use=newhpkeyboard, use=hp2621b,
8634 hp2621b-kx-p|hp 2621b with new keyboard & printer,
8635 use=hp+printer, use=hp2621b-kx,
8637 # Some assumptions are made in the following entries.
8638 # These settings are NOT set up by the initialization strings.
8640 # Port Configuration
8641 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
8643 # Terminal Configuration
8644 # InhHndShk(G)=Yes InhDC2(H)=Yes
8645 # XmitFnctn(A)=No InhEolWrp=No
8648 # Hp 2622a & hp2623a display and graphics terminals
8650 hp2622|hp2622a|hp 2622,
8653 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
8655 # The 2623 is a 2622 with extra graphics hardware.
8656 hp2623|hp2623a|hp 2623,
8659 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
8660 use=hp+printer, use=hp2624,
8662 # The hewlett packard B can have an optional extra 6 pages of memory.
8663 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
8666 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
8667 lm#240, use=hp2624b-p,
8669 # Color manipulations for HP terminals
8670 hp+color|hp with colors,
8672 colors#16, ncv#17, pairs#7,
8673 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
8674 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
8675 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
8676 %t1%e.%p7%d%;z%p1%dI,
8677 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
8678 I\E&v1b1c6I\E&v1x1y7I,
8679 op=\E&v0S, scp=\E&v%p1%dS,
8681 # <is2> sets the screen to be 80 columns wide
8682 hp2397a|hp2397|hewlett packard 2397A color terminal,
8683 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
8685 # HP 700/44 Setup parameters:
8686 # Terminal Mode HP-PCterm
8687 # Inhibit Auto Wrap NO
8688 # Status Line Host Writable
8689 # PC Character Set YES
8690 # Twenty-Five Line Mode YES
8691 # XON/XOFF @128 or 64 (sc)
8692 # Keycode Mode NO or YES (sc)
8693 # Backspace Key BS or BS/DEL
8695 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
8696 # \E\\? does not turn off keycode mode
8697 # <smsc> sets alternate start/stop; keycode on
8698 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
8701 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
8703 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
8704 cnorm=\E[?25h, cr=\r, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8705 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8706 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
8708 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
8709 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8710 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
8711 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
8712 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
8713 kpp=\E[5~, rmam=\E[?7l,
8714 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
8715 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
8716 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
8717 smul=\E[4m, xoffc=g, xonc=e,
8719 # (hp2392: copied <rmir> here from hpex -- esr)
8722 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
8723 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
8724 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
8725 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
8728 hpsub|hp terminals -- capability subset,
8729 am, da, db, mir, xhp, xon,
8731 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
8732 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
8733 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n,
8734 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
8735 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
8736 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
8739 # May be used for most 24 x 80 hp terminals,
8740 # but has no padding added, so may allow runover in some terminals at high
8741 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
8742 # hp98x5 terminal emulators or hp98x6 consoles.
8743 # Adds xy-cursor addressing, vertical cursor addressing, home,
8744 # last line, and underline capabilities.
8746 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
8747 # moved <rmir> here from hpsub -- esr)
8748 hpex|hp extended capabilities,
8749 cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H,
8750 kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ,
8751 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
8753 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
8754 hp2|hpex2|hewlett-packard extended capabilities newer version,
8755 am, da, db, mir, xhp,
8756 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
8757 bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
8758 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8759 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8760 il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
8761 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8762 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
8763 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
8764 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
8765 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
8766 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
8767 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
8768 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
8769 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
8770 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
8771 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
8772 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
8773 sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
8774 smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8777 # From: <ddavis@ic.berkeley.edu>
8778 hp236|hp236 internal terminal emulator,
8781 clear=\EF, cnorm=\EDE, cub1=^H,
8782 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
8783 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
8784 sgr0=\ECI, smso=\EBI,
8786 # This works on a hp300 console running Utah 4.3 BSD
8787 # From: Craig Leres <leres@okeeffe.berkeley.edu>
8788 hp300h|HP Catseye console,
8789 OTbs, am, da, db, mir, xhp,
8790 cols#128, lines#51, lm#0, xmc#0,
8791 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
8792 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8793 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
8794 if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H,
8795 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8796 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
8797 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
8799 # From: Greg Couch <gregc@ernie.berkeley.edu>
8800 hp9837|hp98720|hp98721|HP 9000/300 workstations,
8801 OTbs, am, da, db, mir, xhp,
8802 cols#128, it#8, lines#46, lm#0,
8803 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
8804 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8805 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8806 il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
8807 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8808 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
8809 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
8810 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
8811 tbc=\E3, vpa=\E&a%p1%dY,
8812 # HP 9845 desktop computer from BRL
8813 # (hp9845: removed unknown capability :gu: -- esr)
8815 OTbs, am, da, db, eo, mir, xhp,
8817 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
8818 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
8819 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
8820 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
8821 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
8822 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
8823 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
8824 hp98550|hp98550a|HP 9000 Series 300 color console,
8825 OTbs, am, da, db, mir, xhp,
8826 cols#128, it#8, lines#49, lm#0,
8827 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
8828 clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8829 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
8830 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8831 if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
8832 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8833 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
8834 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
8835 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
8836 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
8837 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
8838 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
8839 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8840 # From: Victor Duchovni <vic@fine.princeton.edu>
8841 # (hp700-wy: removed obsolete ":nl=^J:";
8842 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
8843 hp700-wy|HP700/41 emulating wyse30,
8844 OTbs, am, bw, mir, msgr,
8845 cols#80, it#8, lines#24, xmc#1,
8846 cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
8847 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8848 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
8849 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
8850 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI,
8851 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
8852 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
8853 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
8854 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
8855 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
8856 hp70092|hp70092a|hp70092A|HP 700/92,
8858 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
8859 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
8860 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
8861 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
8862 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
8863 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
8864 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8865 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
8866 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
8867 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
8868 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
8869 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
8870 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
8871 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8873 bobcat|sbobcat|HP 9000 model 300 console,
8874 am, da, db, mir, xhp,
8875 cols#128, it#8, lines#47, xmc#0,
8876 cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
8877 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
8878 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
8879 il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
8880 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER,
8881 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
8882 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
8883 gator-t|HP 9000 model 237 emulating extra-tall AAA,
8884 lines#94, use=gator,
8885 gator|HP 9000 model 237 emulating AAA,
8887 cols#128, it#8, lines#47,
8888 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
8889 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
8890 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
8891 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
8892 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
8893 il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
8894 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
8895 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
8896 gator-52|HP 9000 model 237 emulating VT52,
8897 cols#128, lines#47, use=vt52,
8898 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
8899 lines#94, use=gator-52,
8903 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
8906 # Honeywell Bull terminal. Its cursor and function keys send single
8907 # control characters and it has standout/underline glitch. Most programs
8908 # do not like these features/bugs. Visual bell is realized by flashing the
8909 # "keyboard locked" LED.
8910 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
8912 clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X,
8913 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
8914 flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y,
8915 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n,
8916 dku7003|Honeywell Bull DKU 7003 all features described,
8919 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
8920 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
8923 #### Lear-Siegler (adm)
8925 # These guys are long since out of the terminals business, but
8926 # in 1995 many current terminals still have an adm type as one of their
8927 # emulations (usually their stupidest, and usually labeled adm3, though
8928 # these `adm3' emulations normally have adm3a+ capabilities).
8930 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
8931 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
8932 # was being held to ground would trigger a send of the top line on the screen.
8933 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
8934 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
8935 # for clearing up this point.)
8937 adm1a|adm1|lsi adm1a,
8940 bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8941 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
8946 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8947 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8948 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
8949 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
8950 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
8954 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
8955 # The following ADM-3A switch settings are assumed for normal operation:
8956 # SPACE U/L_DISP CLR_SCRN 24_LINE
8957 # CUR_CTL LC_EN AUTO_NL FDX
8958 # Other switches may be set for operator convenience or communication
8959 # requirements. I recommend
8960 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
8962 # Most of these terminals required an option ROM to support lower case display.
8963 # Open the case and look at the motherboard; if you see an open 24-pin DIP
8964 # socket, you may be out of luck.
8966 # (adm3a: some capabilities merged in from BRl entry -- esr)
8970 OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
8971 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8972 cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L,
8976 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
8979 bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^,
8980 rmso=\EG, smso=\EG, use=adm3a+,
8981 # A lot of terminals other than adm11s use these. Wherever you see
8982 # use=adm+sgr with some of its capabilities disabled, try the
8983 # disabled ones. They may well work but not have been documented or
8984 # expressed in the using entry. We'd like to cook up an <sgr> but the
8985 # <rmacs>/<smacs> sequences of the using entries vary too much.
8986 adm+sgr|adm style highlight capabilities,
8987 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
8988 smso=\EG4, smul=\EG8,
8989 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
8990 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
8991 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
8992 # be ^Z, according to his entry.
8993 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
8994 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
8997 OTkn#8, cols#80, lines#24,
8998 OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H,
8999 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9000 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
9001 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
9002 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9003 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E),
9005 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
9006 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
9007 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
9008 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
9009 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
9010 # via BRL. That entry asserted <xmc#1>, but I've left that out because
9011 # neither earlier nor later ADMSs have it -- esr)
9013 # You will need to get into the supervisor setup before you can set
9014 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
9015 # see a lot more setup options.
9017 # While in supervisor setup you can also use following codes:
9019 # Ctrl-P Personality character selections (configure for example what
9020 # arrow keys send, if I recall correctly)
9021 # Ctrl-T tabs 1-80 use left&right to move and up to set and
9022 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
9023 # Ctrl-B Binary setup (probably not needed. I think that everything can
9024 # be set using normal setup)
9025 # Ctrl-A Answerback mode (enter answerback message)
9026 # Ctrl-U User friendly mode (normal setup)
9027 # Ctrl-D Defaults entire setup and function keys from EPROM tables
9028 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
9029 # Ctrl-R Reads both setup and functions keys from NVM.
9030 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
9032 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
9033 # RTS/CTS used nowadays with virtually every modem and computer. 19200
9034 # bps works fine with hardware flow control.
9036 # The following null-modem cable should fix this and enable you to use
9037 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
9038 # set ADM-12+ for DTR handshaking from supervisor setup.
9051 OTbs, OTpt, am, mir,
9052 OTug#1, cols#80, it#8, lines#24,
9053 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9054 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9055 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
9056 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
9057 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
9058 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
9059 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
9060 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
9061 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
9063 # (adm20: removed obsolete ":kn#7:" -- esr)
9064 adm20|lear siegler adm20,
9066 cols#80, it#8, lines#24,
9067 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
9068 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
9069 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
9070 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
9072 adm21|lear siegler adm21,
9074 bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
9075 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H,
9076 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
9077 use=adm+sgr, use=adm3a,
9078 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
9079 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
9080 # removed bogus-looking \200 from before <cup>. -- esr)
9084 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9085 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9086 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
9087 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
9089 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
9090 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9091 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
9092 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
9093 # ADM 31 DIP Switches
9095 # This information comes from two versions of the manual for the
9096 # Lear-Siegler ADM 31.
9100 # +-||||-------------------------------------+
9115 # +----------------------------------------------+
9116 # front of case (keyboard)
9118 # S1 - Data Rate - Modem
9119 # S2 - Data Rate - Printer
9120 # ------------------------
9122 # -------------------
9140 # S3 - Interface/Printer/Attributes
9141 # ---------------------------------
9142 # Printer Busy Control
9145 # off off off Busy not active, CD disabled
9146 # off off on Busy not active, CD enabled
9147 # off on off Busy active on J5-20, CD disabled
9148 # on off off Busy active on J5-19, CD disabled - Factory Set.
9149 # on off on Busy active on J5-19, CD enabled
9151 # sw4 Used in conjunction with S4 for comm interface control - Fact 0
9153 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
9155 # sw6 ON enables printer BUSY active LOW - Factory Setting
9156 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
9158 # sw7 ON - steady cursor - Factory Setting
9159 # OFF - blinking cursor
9161 # sw8 ON causes selected attribute character to be displayed
9162 # OFF causes SPACE to be displayed instead - Factory Setting
9168 # sw4 sw1 sw2 sw3 sw4
9169 # ---------------------------
9170 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
9171 # Current Loop disabled - Factory Setting
9172 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
9174 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
9175 # Current Loop Disabled
9177 # sw5 ON disables dot stretching mode - Factory Setting
9178 # OFF enables dot stretching mode
9179 # sw6 ON enables blanking function
9180 # OFF enables underline function - Factory Setting
9181 # sw7 ON causes NULLS to be displayed as NULLS
9182 # OFF causes NULLS to be displayed as SPACES - Factory Setting
9184 # S5 - Word Structure
9185 # -------------------
9186 # sw1 ON enables BREAK key - Factory Setting
9187 # OFF disables BREAK key
9188 # sw2 ON selects 50Hz monitor refresh rate
9189 # OFF selects 60Hz monitor refresh rate - Factory Setting
9191 # Modem Port Selection
9194 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
9195 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
9196 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
9197 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
9198 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
9199 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
9200 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
9201 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
9203 # sw6 ON sends bit 8 a 1 (mark)
9204 # OFF sends bit 8 as 0 (space) - Factory Setting
9205 # sw7 ON selects Block Mode
9206 # OFF selects Conversation Mode - Factory Setting
9207 # sw8 ON selects Full Duplex operation
9208 # OFF selects Half Duplex operation - Factory Setting
9212 # sw1, sw2, sw6, sw7 Reserved - Factory 0
9214 # Printer Port Selection
9215 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
9217 # sw8 ON enables Printer Port
9218 # OFF disables Printer Port - Factory Setting
9220 # S7 - Polling Address
9221 # --------------------
9222 # sw1-7 Establish ASCII character which designates terminal polling address
9224 # OFF = logic 1 - Factory Setting
9225 # sw8 ON enables Polling Option
9226 # OFF disables Polling Option - Factory Setting
9229 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
9231 # This adm31 entry uses underline as the standout mode.
9232 # If the adm31 gives you trouble with standout mode, check the DIP switch in
9233 # position 6, bank @c11, 25% from back end of the circuit board. Should be
9234 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
9235 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
9236 adm31|lsi adm31 with sw6 set for underline mode,
9239 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9240 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9241 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0,
9242 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
9243 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
9244 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
9245 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
9246 adm31-old|o31|old adm31,
9247 rmul@, smso=\EG4, smul@, use=adm31,
9248 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
9252 if=/usr/share/tabset/vt100,
9253 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
9254 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
9258 bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9259 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9260 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
9261 il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n,
9262 kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@,
9263 smir=\Eq, smul@, use=adm+sgr,
9264 # The following termcap for the Lear Siegler ADM-42 leaves the
9265 # "system line" at the bottom of the screen blank (for those who
9266 # find it distracting otherwise)
9267 adm42-ns|lsi adm-42 with no system line,
9268 cbt=\EI\EF \011, clear=\E;\EF \011,
9269 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
9270 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
9271 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
9272 smir=\Eq\EF \011, use=adm42,
9273 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
9274 # The insert mode of this terminal is commented out because it's broken for our
9275 # purposes in that it will shift the position of every character on the page,
9276 # not just the cursor line!
9277 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
9278 adm1178|1178|lsi adm1178,
9280 cols#80, lines#24, xmc#1,
9281 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
9282 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9283 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
9284 home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H,
9285 kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0,
9286 sgr0=\E), smso=\EG4, smul=\EG1,
9290 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
9291 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
9292 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
9294 # ComputerVision Services
9295 # 500 Old Connecticut Path
9299 # Standout mode is dim reverse-video.
9300 pt100|pt200|wren|fenix|prime pt100/pt200,
9302 cols#80, it#8, lines#24,
9303 cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H,
9304 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
9305 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
9306 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
9307 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
9308 home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D,
9309 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n,
9310 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
9312 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
9314 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
9315 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
9317 cup=\E[%i%p1%d;%p2%dH, use=pt100,
9319 rmso@, smso@, use=pt100,
9320 pt250w|Prime PT250 in 132-column mode,
9321 rmso@, smso@, use=pt100w,
9326 # 3475-A North 1st Street
9328 # Vox: (800)-457-4447
9329 # Fax: (408)-473-1510
9330 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
9332 # Qume was bought by Wyse, but still (as of early 1995) has its own support
9333 # group and production division.
9335 # Discontinued Qume models:
9337 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
9338 # built to replace them, and a qvt119+ which was a 101+ with available wide
9339 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
9340 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
9341 # ANSI-compatible terminals with the qvt323 and qvt61.
9343 # Current Qume models (as of February 1995):
9345 # All current Qume terminals have ANSI-compatible operation modes.
9346 # Qume is still producing the qvt62, which features emulations for other
9347 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
9348 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
9349 # with many emulations including Wyse370, Wyse 325, etc. Their newest
9350 # model is the qvt520, which is vt420-compatible.
9352 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
9354 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
9355 # setup mode. Shift-s should be a configuration save to NVRAM.
9357 qvt101|qvt108|qume qvt 101 and QVT 108,
9360 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
9361 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
9362 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
9363 # What seems to be going on here is that this entry was designed so that
9364 # the normal highlight is bold and standout is dim plus something else
9365 # (reverse-video maybe? But then, are there two <rev> sequences?)
9367 # Added kdch1, kil1, kdl1 based on screenshot -TD:
9368 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
9369 qvt101+|qvt101p|qume qvt 101 PLUS product,
9371 cols#80, lines#24, xmc#0,
9372 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
9373 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9374 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
9375 flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
9376 ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
9377 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
9378 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
9379 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9380 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
9381 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
9382 qvt102|qume qvt 102,
9383 cnorm=\E., use=qvt101,
9384 # (qvt103: added <rmam>/<smam> based on init string -- esr)
9385 qvt103|qume qvt 103,
9387 cols#80, it#8, lines#24, vt#3,
9388 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
9389 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
9390 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
9391 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
9392 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
9393 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
9394 hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9395 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
9396 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
9397 rmso=\E[m$<2>, rmul=\E[m$<2>,
9398 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
9399 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
9401 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
9402 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
9403 qvt103-w|qume qvt103 132 cols,
9405 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
9406 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
9408 cols#80, lines#24, xmc#0,
9409 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
9410 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
9411 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
9412 el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I,
9413 hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX,
9414 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
9415 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9416 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9417 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
9418 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
9419 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
9420 lines#25, use=qvt119+,
9421 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
9423 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
9424 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
9425 lines#25, use=qvt119+,
9426 qvt203|qvt203+|qume qvt 203 Plus,
9427 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
9428 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
9429 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
9430 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
9431 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
9433 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
9435 # Since a command is present for enabling 25 data lines,
9436 # a specific terminfo entry may be generated for the 203.
9437 # If one is desired for the QVT 119 PLUS then 25 lines must
9438 # be selected in the status line (setup line 9).
9440 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
9442 is2=\E[=40h\E[?3l, use=qvt203,
9443 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
9445 rs2=\E[?3h\E[=40h, use=qvt203,
9447 #### Televideo (tvi)
9450 # 550 East Brokaw Road
9451 # PO Box 49048 95161
9453 # Vox: (408)-954-8333
9454 # Fax: (408)-954-0623
9457 # These require incredible amounts of padding.
9459 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
9460 # Televideo terminals are ANSI and PC-ANSI compatible.
9462 tvi803|televideo 803,
9463 clear=\E*$<10>, use=tvi950,
9465 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
9466 # Switch settings are:
9487 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
9503 # U do CR/LF when CR received
9504 # D do CR when CR received
9526 # S2 6 Cursor down key
9530 # S2 7 Screen colour
9534 # S2 8 DSR status (pin 6)
9538 # S2 9 DCD status (pin 8)
9542 # S2 10 DTR status (pin 20)
9545 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
9546 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
9547 tvi910|televideo model 910,
9549 cols#80, it#8, lines#24, xmc#1,
9550 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9551 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
9552 home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I,
9553 if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H,
9554 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
9555 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9556 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9557 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
9558 # From: Alan R. Rogers <rogers%albany@csnet-relay>
9559 # as subsequently hacked over by someone at SCO
9560 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
9562 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
9565 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
9566 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
9567 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
9568 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
9571 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
9572 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
9573 # D U D D 8O1 D U U U 8E2
9575 # S1 9 Autowrap (U = on, D = off)
9576 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
9577 # S2 1 Mode (U = block, D = conversational)
9578 # S2 2 Duplex (U = half, D = full)
9579 # S2 3 Hertz (U = 50, D = 60)
9580 # S2 4 Edit mode (U = local, D = duplex)
9581 # S2 5 Cursor type (U = underline, D = block)
9582 # S2 6 Cursor down key (U = send ^J, D = send ^V)
9583 # S2 7 Screen colour (U = green on black, D = black on green)
9584 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
9585 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
9586 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
9588 tvi910+|televideo 910+,
9589 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
9590 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
9591 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
9592 ll=\E=7\s, use=tvi910,
9594 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
9595 # <khome> from BRL entry -- esr)
9596 tvi912|tvi914|tvi920|old televideo 912/914/920,
9597 OTbs, OTpt, am, msgr,
9598 cols#80, it#8, lines#24, xmc#1,
9599 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9600 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9601 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
9602 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
9603 il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
9604 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9605 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9606 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
9608 # We got some new tvi912c terminals that act really weird on the regular
9609 # termcap, so one of our gurus worked this up. Seems that cursor
9610 # addressing is broken.
9611 tvi912cc|tvi912 at cowell college,
9614 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
9615 # From: Benjamin C. W. Sittler
9617 # Someone has put a scanned copy of the manual online at:
9618 # http://vt100.net/televideo/912b-om/
9620 # These terminals were produced ca. 1979, and had a 12" monochrome
9621 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
9622 # ASCII, and were generally similar to adm3a but with attributes
9623 # (including some with magic cookies), fancy half-duplex mode, and
9626 # Some operations require truly incredible amounts of padding. The
9627 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
9628 # are so slow as to be nearly unusable.
9630 # There may or may not have been a separate, earlier series of 912/920
9631 # terminals (without the "B" and "C" suffix); I have never seen one,
9632 # and the manual only describes the "B" and "C" series. The 912 and 920
9633 # are quite distinct from the 914 and 924, which were much nicer non-
9634 # magic-cookie terminals similar to the 950.
9636 # This is a new description for the following TeleVideo terminals,
9637 # distinguished chiefly by their keyboards:
9639 # TVI-912B - very odd layout, no function keys (84 keys)
9640 # TVI-920B - typewriter layout, no function keys (103 keys)
9641 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
9642 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
9644 # To choose a setting for the TERM variable, start with the model:
9646 # Model || base name
9647 # ----------||-----------
9648 # TVI-912B || tvi912b
9649 # TVI-912C || tvi912c
9650 # TVI-920B || tvi920b
9651 # TVI-920C || tvi920c
9653 # Then add a suffix from the following table describing installed options
9654 # and how you'd like to use the terminal:
9656 # Use Video | Second | Visual | Magic | Page || feature
9657 # Attributes | Page | Bell | Cookies | Print || suffix
9658 # ------------|--------|--------|---------|-------||---------
9659 # No | No | N/A | N/A | No || -unk
9660 # No | No | N/A | N/A | Yes || -p
9661 # No | Yes | No | N/A | No || -2p-unk
9662 # No | Yes | No | N/A | Yes || -2p-p
9663 # No | Yes | Yes | N/A | No || -vb-unk
9664 # No | Yes | Yes | N/A | Yes || -vb-p
9665 # Yes | No | N/A | No | N/A ||
9666 # Yes | No | N/A | Yes | N/A || -mc
9667 # Yes | Yes | No | No | N/A || -2p
9668 # Yes | Yes | No | Yes | N/A || -2p-mc
9669 # Yes | Yes | Yes | No | N/A || -vb
9670 # Yes | Yes | Yes | Yes | N/A || -vb-mc
9672 # So e.g. a model 920 C with second page memory option, visual bell
9673 # and no magic cookies would be tvi920c-vb; a model 912 B without the
9674 # second page memory option and using magic cookies would be
9679 # At 9600 baud, the terminal is prone to overflow its input buffer
9680 # during complex operations (insert/delete
9681 # character/line/screen/page), and it does not signal this over the
9682 # RS232 cable. The typical symptom of an overrun is that the terminal
9683 # starts beeping, and output becomes garbled.
9685 # The padding delays in this terminfo were derived using tack(1)
9686 # running on a Linux box connected to a TVI-920C with a later-model
9687 # (A49C1-style) ROM running at 9600 baud, so your mileage may
9688 # vary. The numbers below seem to give the terminal enough time so
9689 # that it doesn't overflow its input buffer and start losing
9694 # If you want to use the FUNCT key on a tvi912[bc], use the
9695 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
9696 # the following table (these also work on the 920 series):
9698 # Unshifted Function Keys:
9700 # Key | capname|| Equivalent
9701 # -----|--------||------------
9702 # F1 | <kf1> || FUNCT + @
9703 # F2 | <kf2> || FUNCT + A
9704 # F3 | <kf3> || FUNCT + B
9705 # F4 | <kf4> || FUNCT + C
9706 # F5 | <kf5> || FUNCT + D
9707 # F6 | <kf6> || FUNCT + E
9708 # F7 | <kf7> || FUNCT + F
9709 # F8 | <kf8> || FUNCT + G
9710 # F9 | <kf9> || FUNCT + H
9711 # F10 | <kf10> || FUNCT + I
9712 # F11 | <kf11> || FUNCT + J
9714 # Shifted Function Keys:
9716 # SHIFT + Key | capname|| Equivalent
9717 # -------------|--------||------------
9718 # SHIFT + F1 | <kf12> || FUNCT + `
9719 # SHIFT + F2 | <kf13> || FUNCT + a
9720 # SHIFT + F3 | <kf14> || FUNCT + b
9721 # SHIFT + F4 | <kf15> || FUNCT + c
9722 # SHIFT + F5 | <kf16> || FUNCT + d
9723 # SHIFT + F6 | <kf17> || FUNCT + e
9724 # SHIFT + F7 | <kf18> || FUNCT + f
9725 # SHIFT + F8 | <kf19> || FUNCT + g
9726 # SHIFT + F9 | <kf20> || FUNCT + h
9727 # SHIFT + F10 | <kf21> || FUNCT + i
9728 # SHIFT + F11 | <kf22> || FUNCT + j
9730 # PORTS AND SWITCH SETTINGS
9732 # Here are the switch settings for the TVI-912B/TVI-920B and
9733 # TVI-912C/TVI-920C:
9735 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
9736 # 2: 9600 3: 4800 4: 2400 5: 1200
9737 # 6: 600 7: 300 8: 150 9: 75
9740 # S2 UART/Terminal options:
9742 # 1: Not used Not allowed
9743 # 2: Alternate character set Standard character set
9744 # 3: Full duplex Half duplex
9745 # 4: 50 Hz refresh 60 Hz refresh
9746 # 5: No parity Send parity
9747 # 6: 2 stop bits 1 stop bit
9748 # 7: 8 data bits 7 data bits
9749 # 8: Not used Not allowed on Rev E or lower
9750 # 9: Even parity Odd parity
9751 # 10: Steady cursor Blinking cursor
9752 # (On Rev E or lower, use W25 instead of switch 10.)
9754 # S5 UART/Terminal options:
9756 # 1: P3-6 Not connected DSR received on P3-6
9757 # 2: P3-8 Not connected DCD received on P3-8
9759 # 3 Open, 4 Open: P3-20 Not connected
9760 # 3 Open, 4 Closed: DTR on when terminal is on
9761 # 3 Closed, 4 Open: DTR is connected to RTS
9762 # 3 Closed, 4 Closed: Not allowed
9764 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
9765 # all data transmitted out of the modem port (P3) will also be
9766 # transmitted out of the printer port (P4).
9768 # 6 Open, 7 Open: Not allowed
9769 # 6 Open, 7 Closed: 20ma current loop input
9770 # 6 Closed, 7 Open: RS232 input
9771 # 6 Closed, 7 Closed: Not allowed
9774 # If the jumper is installed, the effect will occur (the next time the terminal
9777 # S4/W31: Enables automatic LF upon receipt of CR from
9778 # remote or keyboard.
9779 # S4/W32: Enables transmission of EOT at the end of Send. If not
9780 # installed, a carriage return is sent.
9781 # S4/W33: Disables automatic carriage return in column 80.
9782 # S4/W34: Selects Page Print Mode as initial condition. If not
9783 # installed, Extension Mode is selected.
9785 # NON-STANDARD CAPABILITIES
9787 # Sending <u9> or <u7> returns a cursor position report in the format
9788 # YX\r, where Y and X are as in <cup>. This format is described in
9789 # <u8> and <u6>, but it's not clear how one should write an
9790 # appropriate scanf string, since we need to subtract %' ' from the
9791 # character after reading it. The <u9> capability is used by tack(1)
9792 # to synchronize during padding tests, and seems to work for that
9795 # This description also includes the obsolete termcap capabilities
9796 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
9798 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
9800 # The FUNCT modifier actually works with every normal key by sending
9801 # ^AX\r, where X is the sequence normally sent by that key. This is a
9802 # sort of meta key not currently describable in terminfo.
9804 # There are quite a few other keys (especially on the 920 models,) but
9805 # they are for the most part only useful in block mode.
9807 # These terminals have lots of forms manipulation features, mainly
9808 # useful in block mode, including "clear X to nulls" (vs. "clear X to
9809 # spaces"; nulls are sentinels for "send X" operations); "send X"
9810 # operations for uploading all or part of the screen; and block-mode
9811 # editing keys (they don't send escape sequences, but manipulate video
9812 # memory directly). Block mode is used for local editing, and protect
9813 # mode (in conjunction with the "write protect" attribute,
9814 # a.k.a. half-intensity outside of protect mode) is used to control
9815 # which parts of the screen are edited/sent/printed (by <mc0>).
9817 # There are at least two major families of ROM, "early" and
9818 # A49B1/A49C1; the major difference seems to be that the latter ROMs
9819 # support a few extra escape sequences for manipulating the off-screen
9820 # memory page, and for sending whole pages back to the host (mainly
9821 # useful in block mode.) The descriptions in this file don't use any
9822 # of those sequences: set cursor position including page (\E-PYX,
9823 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
9824 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
9825 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
9826 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
9827 # are as in <cup>, and some "send page" features mainly useful for
9828 # forms manipulation.
9830 # The keyboard enable (\E") and disable (\E#) sequences are unused,
9831 # except that a terminal reset (<is2>) enables the keyboard.
9833 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
9834 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
9838 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
9839 # sequences (I infer that in some TeleVideo terminal they may invert
9840 # and uninvert the display) so the <flash> sequence given here is a
9841 # cheesy page-flip instead.
9843 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
9844 # tack(1), so it is not included in the descriptions below.
9846 # It's not clear whether auto_left_margin (<bw>) flag should be set
9847 # for these terminals; tack says yes, so it is set here, but this
9848 # differs from other descriptions I've seen.
9850 # Extension print mode (<mc5>) echoes all characters to the printer
9851 # port [in addition to displaying them] except for the page print mode
9852 # sequence (<mc4>); this is a slight violation of the terminfo
9853 # definition for <mc5> but I don't expect it to cause problems. We
9854 # reset to page print mode in <rs1> since it may have been enabled
9857 # The descriptions with plus signs (+) are building blocks.
9859 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
9861 cols#80, it#8, lines#24,
9862 bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9863 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
9864 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
9865 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
9866 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
9867 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n,
9868 kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA,
9869 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
9870 u7=\E?, u8=%c%c\r, u9=\E?,
9872 # This isn't included in the basic capabilities because it is
9873 # typically unusable in combination with the full range of video
9874 # attributes, since the magic cookie attributes turn into ASCII
9875 # control characters, and the half-intensity ("protected") attribute
9876 # converts all affected characters to spaces.
9878 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
9881 # This uses half-intensity mode (<dim>) for standout (<smso>), and
9882 # exposes no other attributes (half-intensity is the only attribute
9883 # that does not generate a magic cookie.)
9885 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
9887 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
9890 # Full magic-cookie attribute support, with half-intensity reverse
9891 # video for standout. Note that we add a space in the <dim> sequence
9892 # to give a consistent magic-cookie count. Also note that <sgr> uses
9893 # backspacing (in the TVI-supported order) to apply all requested
9894 # attributes with only a single magic cookie.
9896 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
9898 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
9900 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
9901 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
9902 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
9904 # This uses the second page memory option to save & restore screen
9905 # contents. If your terminal is missing the option, this description
9906 # should still work, but that has not been tested.
9908 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
9909 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
9910 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
9912 # This simulates flashing by briefly toggling to the other page
9915 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
9916 bel=\EK$<100>\EK, use=tvi912b+2p,
9918 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
9920 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
9921 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
9922 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
9923 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
9924 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9925 kf8=^AG\r, kf9=^AH\r,
9927 # Combinations of the basic building blocks
9929 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
9930 use=tvi912b+2p, use=tvi912b-unk,
9932 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
9933 use=tvi912b+vb, use=tvi912b-unk,
9935 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
9936 use=tvi912b+printer, use=tvi912b-unk,
9938 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
9939 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
9941 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
9942 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
9944 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
9945 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
9947 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
9948 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
9950 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
9951 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
9953 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
9954 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
9956 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
9957 use=tvi912b+dim, use=tvi912b-unk,
9959 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
9960 use=tvi912b+mc, use=tvi912b-unk,
9962 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
9963 use=tvi920b+fn, use=tvi912b-unk,
9965 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
9966 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
9968 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
9969 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
9971 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
9972 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
9974 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
9975 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
9978 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
9979 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
9982 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
9983 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
9986 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
9987 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
9990 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
9991 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
9994 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
9995 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
9998 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
9999 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
10001 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
10002 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
10004 # Televideo 921 and variants
10005 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
10006 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
10007 # also added empty <acsc> to suppress tic warning -- esr)
10008 tvi921|televideo model 921 with sysline same as page & real vi function,
10009 OTbs, OTpt, am, hs, xenl, xhp,
10010 cols#80, lines#24, xmc#0,
10011 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
10012 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
10013 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
10014 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
10015 if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@,
10016 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
10017 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
10018 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%,
10019 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
10020 # without the beeper
10021 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
10022 # also added empty <acsc> to suppress tic warning -- esr)
10023 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
10025 cols#80, lines#24, xmc#0,
10026 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
10027 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
10028 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
10029 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
10030 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
10031 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
10032 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
10033 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
10034 nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
10035 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
10036 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
10037 dl1=\ER$<2*/>, il1=\EE$<2*/>,
10038 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
10039 kil1=\EE$<2*/>, use=tvi92B,
10041 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
10042 # in from a BSD termcap file because it looks like they do something the
10043 # old ones skip -- esr)
10044 tvi924|televideo tvi924,
10045 am, bw, hs, in, mir, msgr, xenl, xon,
10046 cols#80, it#8, lines#24, wsl#80, xmc#0,
10047 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
10048 cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
10049 cub1=^H, cud1=^V, cuf1=^L,
10050 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
10051 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
10052 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
10053 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
10054 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
10055 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
10056 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
10057 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
10058 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
10059 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
10060 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
10061 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
10062 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
10065 # TVI925 DIP switches. In each of these, D = Down and U = Up,
10067 # Here are the settings for the external (baud) switches (S1):
10070 # 7 8 9 10 [Printer]
10071 # 1 2 3 4 [Main RS232]
10072 # -----------------------------------------------------
10091 # Settings for word length and stop-bits (S1)
10093 # Position Description
10095 # ---------------------------
10102 # S2 (external) settings
10104 # Position Up Dn Description
10105 # --------------------------------------------
10107 # X Duplex edit (transmit editing keys)
10108 # --------------------------------------------
10109 # 2 X 912/920 emulation
10111 # --------------------------------------------
10115 # --------------------------------------------
10119 # --------------------------------------------
10123 # --------------------------------------------
10127 # --------------------------------------------
10131 # --------------------------------------------
10132 # 6 X White on black display
10133 # X Black on white display
10134 # --------------------------------------------
10137 # --------------------------------------------
10140 # --------------------------------------------
10143 # --------------------------------------------
10146 # --------------------------------------------
10147 # 10 X CR/LF (Auto LF)
10150 # S3 (internal switch) settings:
10152 # Position Up Dn Description
10153 # --------------------------------------------
10156 # --------------------------------------------
10159 # --------------------------------------------
10162 # --------------------------------------------
10165 # --------------------------------------------
10168 # --------------------------------------------
10169 # 4 X Blinking block cursor
10171 # --------------------------------------------
10172 # 4 X Blinking underline cursor
10174 # --------------------------------------------
10175 # 4 X Steady block cursor
10177 # --------------------------------------------
10178 # 4 X Steady underline cursor
10180 # --------------------------------------------
10181 # 6 X Screen blanking timer (ON)
10182 # X Screen blanking timer (OFF)
10183 # --------------------------------------------
10184 # 7 X Page attributes
10185 # X Line attributes
10186 # --------------------------------------------
10187 # 8 X DCD disconnected
10189 # --------------------------------------------
10190 # 9 X DSR disconnected
10192 # --------------------------------------------
10193 # 10 X DTR Disconnected
10195 # --------------------------------------------
10197 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
10198 tvi925|televideo 925,
10199 OTbs, am, bw, hs, ul,
10200 cols#80, lines#24, xmc#1,
10201 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
10202 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10203 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
10204 flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1,
10205 ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z,
10206 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
10207 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
10208 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
10209 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
10210 tsl=\Eh\Ef, use=adm+sgr,
10211 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
10212 # to avoid "magic cookie" standout glitch:
10213 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
10215 kbs=^H, kcub1=^H, kcud1=\n, rmso=\E(, smso=\E), use=tvi925,
10217 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
10218 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
10219 # for additional capabilities,
10220 # The following tvi descriptions from B:pjphar and virus!mike
10221 # is for all 950s. It sets the following attributes:
10222 # full duplex (\EDF) write protect off (\E()
10223 # conversation mode (\EC) graphics mode off (\E%)
10224 # white on black (\Ed) auto page flip off (\Ew)
10225 # turn off status line (\Eg) clear status line (\Ef\r)
10226 # normal video (\E0) monitor mode off (\EX or \Eu)
10227 # edit mode (\Er) load blank char to space (\Ee\040)
10228 # line edit mode (\EO) enable buffer control (^O)
10229 # protect mode off (\E\047) duplex edit keys (\El)
10230 # program unshifted send key to send line all (\E016)
10231 # program shifted send key to send line unprotected (\E004)
10232 # set the following to nulls:
10233 # field delimiter (\Ex0\200\200)
10234 # line delimiter (\Ex1\200\200)
10235 # start-protected field delimiter (\Ex2\200\200)
10236 # end-protected field delimiter (\Ex3\200\200)
10237 # set end of text delimiter to carriage return/null (\Ex4\r\200)
10239 # TVI 950 Switch Setting Reference Charts
10243 # S1 1 2 3 4 5 6 7 8 9 10
10244 # +-----------------------+-----+-----+-----------------------+
10245 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
10246 # | |Bits |Bits | |
10247 # +------+-----------------------+-----+-----+-----------------------+
10248 # | Up | See | 7 | 2 | See |
10249 # +------+-----------------------+-----+-----+-----------------------+
10250 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
10251 # +------+-----------------------+-----+-----+-----------------------+
10254 # S2 1 2 3 4 5 6 7 8 9 10
10255 # +-----+-----+-----------------+-----+-----------+-----+-----+
10256 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
10257 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10258 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
10259 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10260 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
10261 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
10265 # +-----------+-----+-----+-----+-----+-----------+
10266 # | Display | 1 | 2 | 3 | 4 | Baud |
10267 # +-----------+-----+-----+-----+-----+ |
10268 # | Printer | 7 | 8 | 9 | 10 | Rate |
10269 # +-----------+-----+-----+-----+-----+-----------+
10270 # | D | D | D | D | 9600 |
10271 # | U | D | D | D | 50 |
10272 # | D | U | D | D | 75 |
10273 # | U | U | D | D | 110 |
10274 # | D | D | U | D | 135 |
10275 # | U | D | U | D | 150 |
10276 # | D | U | U | D | 300 |
10277 # | U | U | U | D | 600 |
10278 # | D | D | D | U | 1200 |
10279 # | U | D | D | U | 1800 |
10280 # | D | U | D | U | 2400 |
10281 # | U | U | D | U | 3600 |
10282 # | D | D | U | U | 4800 |
10283 # | U | D | U | U | 7200 |
10284 # | D | U | U | U | 9600 |
10285 # | U | U | U | U | 19200 |
10286 # +-----+-----+-----+-----+-----------+
10289 # +-----+-----+-----+-----------+
10290 # | 3 | 4 | 5 | Parity |
10291 # +-----+-----+-----+-----------+
10292 # | X | X | D | None |
10293 # | D | D | U | Odd |
10294 # | D | U | U | Even |
10295 # | U | D | U | Mark |
10296 # | U | U | U | Space |
10297 # +-----+-----+-----+-----------+
10301 # +-----+-----+-----------------+
10302 # | 7 | 8 | Communication |
10303 # +-----+-----+-----------------+
10304 # | D | D | Half Duplex |
10305 # | D | U | Full Duplex |
10306 # | U | D | Block |
10307 # | U | U | Local |
10308 # +-----+-----+-----------------+
10310 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
10311 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
10312 # should be present and all tvi native modes use the same string for this.
10313 # Finally, note that BSD has cud1=^V. -- esr)
10314 tvi950|televideo 950,
10315 OTbs, am, hs, mir, msgr, xenl, xon,
10316 cols#80, it#8, lines#24, xmc#1,
10317 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
10318 cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10319 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10320 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
10321 fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
10323 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
10324 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10326 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
10327 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
10328 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10329 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10330 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
10331 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
10334 # is for 950 with two pages adds the following:
10335 # set 48 line page (\E\\2)
10336 # place cursor at page 0, line 24, column 1 (\E-07 )
10337 # set local (no send) edit keys (\Ek)
10339 # two page 950 adds the following:
10340 # when entering ex, set 24 line page (\E\\1)
10341 # when exiting ex, reset 48 line page (\E\\2)
10342 # place cursor at 0,24,1 (\E-07 )
10343 # set duplex (send) edit keys (\El) when entering vi
10344 # set local (no send) edit keys (\Ek) when exiting vi
10346 tvi950-2p|televideo950 w/2 pages,
10347 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10348 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10350 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10351 smkx=\El, use=tvi950,
10353 # is for 950 with four pages adds the following:
10354 # set 96 line page (\E\\3)
10355 # place cursor at page 0, line 24, column 1 (\E-07 )
10357 # four page 950 adds the following:
10358 # when entering ex, set 24 line page (\E\\1)
10359 # when exiting ex, reset 96 line page (\E\\3)
10360 # place cursor at 0,24,1 (\E-07 )
10362 tvi950-4p|televideo950 w/4 pages,
10363 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10364 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10366 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10367 smkx=\El, use=tvi950,
10369 # <is2> for reverse video 950 changes the following:
10370 # set reverse video (\Ed)
10372 # set vb accordingly (\Ed ...delay... \Eb)
10374 tvi950-rv|televideo950 rev video,
10375 flash=\Ed$<200/>\Eb,
10376 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
10377 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
10381 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
10382 tvi950-rv-2p|televideo950 rev video w/2 pages,
10383 flash=\Ed$<200/>\Eb,
10384 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10385 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10387 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10388 smkx=\El, use=tvi950,
10390 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
10391 tvi950-rv-4p|televideo950 rev video w/4 pages,
10392 flash=\Ed$<200/>\Eb,
10393 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
10394 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
10396 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
10397 smkx=\El, use=tvi950,
10398 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
10399 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
10400 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
10401 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
10402 # the :ko: string had :cl: in it, which means that one of the original
10403 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
10404 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
10405 # ko implies -- esr)
10406 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
10408 tvi955|televideo 955,
10411 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
10412 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
10413 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
10414 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
10415 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
10416 rmam=\E[=7l, rmxon=^N,
10417 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
10419 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
10421 tvi955-w|955-w|televideo955 w/132 cols,
10423 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
10424 # use half-intensity as normal mode, full intensity as <bold>
10425 tvi955-hb|955-hb|televideo955 half-bright,
10426 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
10427 sgr0=\EG0\E[=5h, use=tvi955,
10428 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
10429 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
10430 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
10431 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
10432 # it does to the function keys. I deduced <rmam>/<smam>.
10433 # also added empty <acsc> to suppress tic warning, -- esr)
10434 tvi970|televideo 970,
10435 OTbs, OTpt, am, da, db, mir, msgr,
10436 cols#80, it#8, lines#24,
10437 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
10438 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
10439 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
10440 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
10441 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
10442 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
10443 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10444 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
10445 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
10446 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
10447 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
10448 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
10449 smul=\E[4m, vpa=\E[%i%p1%dd,
10450 tvi970-vb|televideo 970 with visual bell,
10451 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
10453 tvi970-2p|televideo 970 with using 2 pages of memory,
10454 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
10456 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
10457 # per line (rather than 40), Esc K chooses the normal character set. Not sure
10458 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
10459 # <smul> strings are klutzy, but at least use no screen space.
10460 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
10461 # its absence means <smam>=\Ev isn't safe to use. -- esr)
10462 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
10463 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
10464 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
10465 tvipt|televideo personal terminal,
10468 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
10469 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
10470 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
10471 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n,
10472 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
10473 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
10474 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
10475 tvi9065|televideo 9065,
10476 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
10477 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
10479 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
10480 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
10481 cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
10482 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
10483 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
10484 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
10485 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
10486 el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
10487 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
10488 il=\E[%p1%dL, il1=\EE, ind=\n, indn=\E[%p1%dS, invis=\EG1,
10490 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
10491 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
10492 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
10493 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
10494 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10495 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
10496 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n,
10497 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
10498 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
10499 pfx=\E|%p1%{48}%+%c1%p2%s\031,
10500 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
10501 rep=\E[%p2%db%p1%c, rev=\EG4,
10502 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
10503 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
10504 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
10505 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
10506 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
10507 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
10508 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
10509 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
10510 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
10512 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
10513 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
10515 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
10516 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
10517 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
10521 # In September 1993, Visual Technology of Westboro, Massachusetts,
10522 # merged with White Pine Software of Nashua, New Hampshire.
10524 # White Pine Software may be contacted at +1 603/886-9050.
10525 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
10528 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
10529 # Recently I hacked together the following termcap for Visual
10530 # Technology's Visual 50 terminal. It's a slight modification of
10531 # the vt52 termcap.
10532 # It's intended to run when the Visual 50 is in vt52 emulation mode
10533 # (I know what you're thinking; if it's emulating a vt52, then why
10534 # another termcap? Well, it turns out that the Visual 50 can handle
10535 # <dl1> and db(?) among other things, which the vt52 can't)
10536 # The termcap works OK for the most part. The only problem is on
10537 # character inserts. The whole line gets painfully redrawn for each
10538 # character typed. Any suggestions?
10539 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
10540 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
10541 # disguise; <kf7>-<kf9> are really l1-l3.
10543 OTbs, OTpt, am, da, db, msgr,
10544 cols#80, it#8, lines#24,
10545 OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H,
10546 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10547 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
10548 ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
10549 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
10550 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
10551 nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
10552 # this one was BSD & SCO's vi50
10553 vi50adm|visual 50 in adm3a mode,
10555 cols#80, it#8, lines#24,
10556 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10557 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
10558 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H,
10559 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
10560 rmso=\ET, smso=\EU,
10561 # From: Jeff Siegal <jbs@quiotix.com>
10563 OTbs, am, mir, msgr,
10564 cols#80, it#8, lines#24,
10565 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
10566 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10567 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
10568 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
10569 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
10570 smir=\Ea, smso=\EU,
10572 # Visual 200 from BRL
10573 # The following switch settings are assumed for normal operation:
10574 # FULL_DUPLEX SCROLL CR
10575 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
10576 # Other switches may be set for operator convenience or communication
10578 # Character insertion is kludged in order to get around the "beep" misfeature.
10579 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
10580 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
10581 # and <dl1> strings, but we seem to get along fine without them.
10583 OTbs, OTpt, am, mir, msgr,
10584 OTkn#10, cols#80, it#8, lines#24,
10585 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H,
10586 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10587 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
10588 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=\n, invis=\Ea,
10589 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
10590 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
10591 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
10592 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
10593 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
10594 rmacs=\EG, rmkx=\E>, rmso=\E3,
10595 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
10596 smkx=\E=, smso=\E4, tbc=\Eg,
10597 # The older Visuals didn't come with function keys. This entry uses
10598 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
10599 # If your version of vi doesn't support function keys you may want
10601 vi200-f|visual 200 no function keys,
10602 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
10603 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
10604 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
10606 vi200-rv|visual 200 reverse video,
10607 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
10609 # the function keys are programmable but we don't reprogram them to their
10610 # default values with <is2> because programming them is very verbose. maybe
10611 # an initialization file should be made for the 300 and they could be stuck
10613 # (vi300: added <rmam>/<smam> based on init string -- esr)
10614 vi300|visual 300 ansi x3.64,
10617 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
10618 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10619 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
10621 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
10622 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10623 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
10624 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
10625 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
10626 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
10627 smso=\E[1m, smul=\E[4m,
10628 # some of the vi300s have older firmware that has the command
10629 # sequence for setting editing extent reversed.
10630 vi300-old|visual 300 with old firmware (set edit extent reversed),
10631 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
10633 # Visual 500 prototype entry from University of Wisconsin.
10634 # The best place to look for the escape sequences is page A1-1 of the
10635 # Visual 500 manual. The initialization sequence given here may be
10636 # overkill, but it does leave out some of the initializations which can
10637 # be done with the menus in set-up mode.
10638 # The :xp: line below is so that emacs can understand the padding requirements
10639 # of this slow terminal. :xp: is 10 time the padding factor.
10640 # (vi500: removed unknown :xp#4: termcap;
10641 # also added empty <acsc> to suppress tic warning -- esr)
10644 cols#80, it#8, lines#33,
10645 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
10646 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
10647 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
10648 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
10649 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
10651 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
10652 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10653 khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
10654 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
10656 # The visual 550 is a visual 300 with tektronix graphics,
10657 # and with 33 lines. clear screen is modified here to
10658 # also clear the graphics.
10659 vi550|visual 550 ansi x3.64,
10661 clear=\030\E[H\E[2J, use=vi300,
10663 vi603|visual603|visual 603,
10665 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
10666 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
10667 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
10668 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
10669 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
10670 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
10671 sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m,
10672 tsl=\EP2~, use=vt100+4bsd,
10677 # 3471 North First Street
10678 # San Jose, CA 95134
10679 # Vox: (408)-473-1200
10680 # Fax: (408) 473-1222
10681 # Web: http://www.wyse.com
10683 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
10684 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
10685 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
10686 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
10689 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
10690 # They now own the Qume and Amdek brands, too. So these are the people to
10691 # talk with about all Link, Qume, and Amdek terminals.
10693 # These entries include a few small fixes.
10694 # I canceled the bel capacities in the vb entries.
10695 # I made two trivial syntax fixes in the wyse30 entry.
10696 # I made some entries relative to adm+sgr.
10699 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
10701 # Although the Wyse 30 can support more than one attribute
10702 # it requires magic cookies to do so. Many applications do not
10703 # function well with magic cookies. The following terminfo uses
10704 # the protect mode to support one attribute (dim) without cookies.
10705 # If more than one attribute is needed then the wy30-mc terminfo
10708 wy30|wyse30|Wyse 30,
10709 am, bw, hs, mc5i, mir, msgr, xon,
10710 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10711 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
10712 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H,
10713 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10714 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
10715 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
10716 fsl=\r, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
10717 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
10718 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
10719 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
10720 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10721 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
10722 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
10723 mc5=^X, nel=\r\n, pfx=\Ez%p1%{63}%+%c%p2%s\177,
10724 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
10725 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10726 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10727 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10728 smso=\E`7\E), tbc=\E0, tsl=\EF,
10730 # This terminal description uses the non-hidden attribute mode
10731 # (with magic cookie).
10733 # (wy30-mc: added <smcup> to suppress tic warning --esr)
10734 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
10737 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
10738 rmcup=\EG0, rmso=\EG0,
10739 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10740 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10741 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10742 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10743 smso=\EG4, use=wy30, use=adm+sgr,
10744 # The mandatory pause used by <flash> does not work with
10745 # older versions of terminfo. If you see this effect then
10746 # unset xon and delete the / from the delay.
10747 # i.e. change $<100/> to $<100>
10748 wy30-vb|wyse30-vb|wyse 30 visible bell,
10751 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
10752 # Normal) without magic cookies by using the protect mode.
10753 # The following description uses this feature, but when more
10754 # than one attribute is put on the screen at once, all attributes
10755 # will be changed to be the same as the last attribute given.
10756 # The Wyse 50 can support more attributes when used with magic
10757 # cookies. The wy50-mc terminal description uses magic cookies
10758 # to correctly handle multiple attributes on a screen.
10760 wy50|wyse50|Wyse 50,
10761 am, bw, hs, mc5i, mir, msgr, xon,
10762 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10763 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
10764 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H,
10765 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10766 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
10767 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
10768 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
10769 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
10770 kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW,
10771 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
10772 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
10773 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10774 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10775 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
10776 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
10777 pfx=\Ez%p1%{63}%+%c%p2%s\177,
10778 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
10779 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10780 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
10782 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10783 smso=\E`6\E), tbc=\E0, tsl=\EF,
10785 # This terminal description uses the non-hidden attribute mode
10786 # (with magic cookie).
10788 # The mandatory pause used by flash does not work with some
10789 # older versions of terminfo. If you see this effect then
10790 # unset <xon> and delete the / from the delay.
10791 # i.e. change $<100/> to $<100>
10792 # (wy50-mc: added <smcup> to suppress tic warning --esr)
10793 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
10796 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
10797 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
10798 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10799 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10800 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10801 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10802 smso=\EGt, use=wy50, use=adm+sgr,
10803 wy50-vb|wyse50-vb|wyse 50 visible bell,
10805 wy50-w|wyse50-w|wyse 50 132-column,
10806 cols#132, lw#7, nlab#16, wsl#97,
10807 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
10809 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
10813 # The Wyse 350 is a Wyse 50 with color.
10814 # Unfortunately this means that it has magic cookies.
10815 # The color attributes are designed to overlap the reverse, dim and
10816 # underline attributes. This is nice for monochrome applications
10817 # because you can make underline stuff green (or any other color)
10818 # but for true color applications it's not so hot because you cannot
10819 # mix color with reverse, dim or underline.
10820 # To further complicate things one of the attributes must be
10821 # black (either the foreground or the background). In reverse video
10822 # the background changes color with black letters. In normal video
10823 # the foreground changes colors on a black background.
10824 # This terminfo uses some of the more advanced features of curses
10825 # to display both color and blink. In the final analysis I am not
10826 # sure that the wy350 runs better with this terminfo than it does
10827 # with the wy50 terminfo (with user adjusted colors).
10829 # The mandatory pause used by flash does not work with
10830 # older versions of terminfo. If you see this effect then
10831 # unset xon and delete the / from the delay.
10832 # i.e. change $<100/> to $<100>
10834 # Bug: The <op> capability resets attributes.
10835 wy350|wyse350|Wyse 350,
10836 am, bw, hs, mc5i, mir, xon,
10837 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
10839 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
10840 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
10841 cub1=^H, cud1=\n, cuf1=^L,
10842 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
10843 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
10844 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
10845 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
10846 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
10847 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
10848 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
10849 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
10850 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10851 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10852 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
10853 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0,
10854 pfx=\Ez%p1%{63}%+%c%p2%s\177,
10855 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
10856 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
10857 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
10858 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
10859 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
10861 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
10862 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
10863 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
10865 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
10866 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
10867 wy350-vb|wyse350-vb|wyse 350 visible bell,
10869 wy350-w|wyse350-w|wyse 350 132-column,
10870 cols#132, lw#7, nlab#16, wsl#97,
10871 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
10873 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
10876 # This terminfo description is untested.
10877 # The wyse100 emulates an adm31, so the adm31 entry should work.
10881 cols#80, lines#24, xmc#1,
10882 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10883 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10884 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n,
10885 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
10886 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
10887 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
10888 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
10890 # The Wyse 120/150 has most of the features of the Wyse 60.
10891 # This terminal does not need padding up to 9600 baud!
10892 # <msgr> should be set but the clear screen fails when in
10893 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
10896 wy120|wyse120|wy150|wyse150|Wyse 120/150,
10897 am, bw, hs, km, mc5i, mir, msgr, xon,
10898 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
10899 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10900 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
10901 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10902 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
10903 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
10904 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=\011$<1>,
10905 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
10906 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10908 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10909 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10910 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10911 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10912 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10913 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10914 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
10915 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
10916 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10917 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10918 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
10919 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
10920 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
10921 rs3=\EwG\Ee($<100>,
10922 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10923 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10924 %{64}%|%;%?%p7%t%{1}%|%;%c,
10925 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10926 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10927 tbc=\E0, tsl=\EF, use=adm+sgr,
10929 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
10930 cols#132, lw#7, nlab#16, wsl#97,
10931 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
10932 rs2=\E`;$<70>, use=wy120,
10934 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
10935 lh@, lines#25, lw@, nlab@,
10936 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
10938 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
10939 lh@, lines#25, lw@, nlab@,
10940 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
10942 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
10945 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
10948 # The Wyse 60 is like the Wyse 50 but with more padding.
10949 # The reset strings are slow and the pad times very depending
10950 # on other parameters such as font loading. I have tried
10951 # to follow the following outline:
10953 # <rs1> -> set personality
10954 # <rs2> -> set number of columns
10955 # <rs3> -> set number of lines
10956 # <is1> -> select the proper font
10957 # <is2> -> do the initialization
10958 # <is3> -> set up display memory (2 pages)
10960 # The Wyse 60's that have vt100 emulation are slower than the
10961 # older Wyse 60's. This change happened mid-1987.
10962 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
10964 # The meta key is only half right. This terminal will return the
10965 # high order bit set when you hit CTRL-function_key
10967 # It may be useful to assign two function keys with the
10968 # values \E=(\s look at old data in page 1
10969 # \E=W, look at bottom of page 1
10970 # where \s is a space ( ).
10973 # The Wyse 60 runs faster when the XON/XOFF
10974 # handshake is turned off.
10976 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
10977 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
10978 wy60|wyse60|Wyse 60,
10979 am, bw, hs, km, mc5i, mir, msgr,
10980 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
10981 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10982 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
10983 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10984 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10985 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
10986 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
10987 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
10988 ip=$<3>, is1=\EcB0\EcC1,
10989 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10991 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10992 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10993 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10994 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10995 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10996 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10997 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
10998 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
10999 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11000 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11001 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
11002 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
11003 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
11004 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
11005 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11006 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11007 %{64}%|%;%?%p7%t%{1}%|%;%c,
11008 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11009 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
11010 tbc=\E0, tsl=\EF, use=adm+sgr,
11012 wy60-w|wyse60-w|wyse 60 132-column,
11013 cols#132, lw#7, nlab#16, wsl#97,
11014 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
11015 rs2=\EeF$<150>\E`;$<150>, use=wy60,
11017 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
11018 lh@, lines#25, lw@, nlab@,
11019 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
11020 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
11021 lh@, lines#25, lw@, nlab@,
11022 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
11024 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
11026 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
11027 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
11028 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
11029 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
11030 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
11031 cols#132, lw#7, nlab#16, wsl#97,
11032 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
11033 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
11034 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
11036 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
11037 lh@, lines#43, lw@, nlab@,
11038 pln@, rs3=\Ee+$<150>, use=wy60-42,
11039 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
11040 lh@, lines#43, lw@, nlab@,
11041 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
11043 wy60-vb|wyse60-vb|Wyse 60 visible bell,
11045 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
11048 # The Wyse-99GT looks at lot like the Wyse 60 except that it
11049 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
11050 # setup parameter controls the number of lines on the screen.
11051 # For the Wyse 99GT the "lines" setup parameter controls the
11052 # number of lines in a page. The screen can display 25 lines max.
11053 # The Wyse-99GT also has personalities for the VT220 and
11054 # Tektronix 4014. But this has no bearing on the native mode.
11056 # (msgr) should be set but the clear screen fails when in
11057 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
11058 # then set msgr, else use msgr@.
11060 # u0 -> enter Tektronix mode
11061 # u1 -> exit Tektronix mode
11063 wy99gt|wyse99gt|Wyse 99gt,
11065 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
11066 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
11067 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
11068 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
11069 u0=\E~>\E8, u1=\E[42h, use=wy60,
11071 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
11072 cols#132, lw#7, nlab#16, wsl#97,
11073 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
11074 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
11077 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
11078 lh@, lines#25, lw@, nlab@,
11079 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
11081 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
11082 lh@, lines#25, lw@, nlab@,
11083 pln@, rs2=\E`;$<150>, use=wy99gt-w,
11085 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
11088 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
11089 bel@, use=wy99gt-w,
11091 # Can't set tabs! Other bugs (ANSI mode only):
11092 # - can't redefine function keys (anyway, key redefinition in ANSI mode
11093 # is too much complex to be described);
11094 # - meta key can't be described (the terminal forgets it when reset);
11095 # The xon-xoff handshaking can't be disabled while in ansi personality, so
11096 # emacs can't work at speed greater than 9600 baud. No padding is needed at
11098 # dch1 has been commented out because it causes annoying glittering when
11099 # vi deletes one character at the beginning of a line with tabs in it.
11100 # dch makes sysgen(1M) have a horrible behaviour when deleting
11101 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
11102 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
11103 # not, so smir and rmir are commented out as well.
11104 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11105 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
11106 am, km, mc5i, mir, msgr, xenl,
11107 cols#80, it#8, lines#25, vt#3,
11108 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
11109 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11110 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r,
11111 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
11112 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
11113 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
11114 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
11115 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
11116 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
11117 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
11118 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
11119 il1=\E[L, ind=\n$<1>, invis=\E[8m,
11120 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
11121 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
11122 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11123 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
11124 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
11125 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
11126 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
11127 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
11128 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
11129 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
11130 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
11131 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
11132 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
11135 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
11136 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
11137 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
11138 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
11140 # This is the american terminal. Here tabs work fine.
11141 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11142 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
11143 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
11145 # This terminal (firmware version 02) has a lot of bugs:
11146 # - can't set tabs;
11147 # - other bugs in ANSI modes (see above).
11148 # This description disables handshaking when using cup. This is because
11149 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
11150 # cannot be used at speeds greater than 9600 baud, because at greater
11151 # speeds handshaking is needed even for character sending. If you use
11152 # DTR handshaking, you can use even greater speeds.
11153 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11154 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
11155 am, bw, hs, km, mc5i, mir, msgr, xon,
11156 cols#80, it#8, lines#25, wsl#46,
11157 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
11158 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
11159 cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
11160 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
11161 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
11162 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
11163 flash=\E\^1$<30/>\E\^0, fsl=\r, home=^^, ht=^I, il1=\EE,
11164 ind=\n, invis=\EG3,
11165 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
11166 \^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er
11168 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
11169 kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
11170 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
11171 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
11172 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
11173 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
11174 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
11175 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
11176 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
11177 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
11178 9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
11179 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
11180 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
11181 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
11183 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
11184 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
11186 # This is the american terminal. Here tabs work.
11187 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
11188 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
11189 hts=\E1, tbc=\E0, use=wy99f,
11192 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
11193 # The reset strings are slow and the pad times very depending
11194 # on other parameters such as font loading. I have tried
11195 # to follow the following outline:
11197 # <rs1> -> set personality
11198 # <rs2> -> set number of columns
11199 # <rs3> -> set number of lines
11200 # <is1> -> select the proper font
11201 # <is2> -> do the initialization
11202 # <is3> -> set up display memory (2 pages)
11204 # The display memory may be used for either text or graphics.
11205 # When "Display Memory = Shared" the terminal will have more pages
11206 # but garbage may be left on the screen when you switch from
11207 # graphics to text. If "Display Memory = Unshared" then the
11208 # text area will be only one page long.
11210 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
11211 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
11212 wy160|wyse160|Wyse 160,
11213 am, bw, hs, km, mc5i, mir, msgr,
11214 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
11215 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11216 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
11217 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11218 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
11219 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
11220 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=\r, home=\E{, ht=^I,
11221 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
11222 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
11224 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11225 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11226 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11227 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11228 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11229 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
11230 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
11231 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
11232 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11233 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11234 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
11235 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
11236 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
11237 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
11238 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11239 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11240 %{64}%|%;%?%p7%t%{1}%|%;%c,
11241 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11242 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
11243 tbc=\E0, tsl=\EF, use=adm+sgr,
11245 wy160-w|wyse160-w|wyse 160 132-column,
11246 cols#132, lw#7, nlab#16, wsl#90,
11247 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
11248 rs2=\EeF$<150>\E`;$<150>, use=wy160,
11250 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
11251 lh@, lines#25, lw@, nlab@,
11252 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
11253 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
11254 lh@, lines#25, lw@, nlab@,
11255 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
11257 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
11259 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
11260 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
11261 rs3=\Ee*$<150>, use=wy160,
11262 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
11263 cols#132, lw#7, nlab#16, wsl#90,
11264 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
11265 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
11267 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
11268 lh@, lines#43, lw@, nlab@,
11269 pln@, rs3=\Ee+$<150>, use=wy160-42,
11270 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
11271 lh@, lines#43, lw@, nlab@,
11272 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
11274 wy160-vb|wyse160-vb|Wyse 160 visible bell,
11276 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
11279 # The Wyse 75 is a vt100 lookalike without advanced video.
11281 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
11282 # Underline) without magic cookies. The following description
11283 # uses this capability, but when more than one attribute is
11284 # put on the screen at once, all attributes will be changed
11285 # to be the same as the last attribute given.
11286 # The Wyse 75 can support more attributes when used with magic
11287 # cookies. The wy75-mc terminal description uses magic cookies
11288 # to correctly handle multiple attributes on a screen.
11290 wy75|wyse75|wyse 75,
11291 am, hs, mc5i, mir, msgr, xenl, xon,
11292 cols#80, lines#24, ma#1, pb#1201, wsl#78,
11293 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11294 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
11295 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr$<2>,
11296 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
11297 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11298 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
11299 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
11300 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
11301 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
11302 enacs=\E)0, flash=\E[30h\E\,$<250/>\E[30l, fsl=^A,
11303 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
11304 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
11305 ind=\n$<2>, ip=$<1>,
11306 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
11307 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
11308 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
11309 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
11310 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
11311 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
11312 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
11313 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
11314 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
11315 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
11316 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
11317 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
11318 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
11320 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
11321 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
11323 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11324 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
11325 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
11327 # This terminal description uses the non-hidden attribute mode
11328 # (with magic cookie).
11330 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
11333 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
11334 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
11335 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
11336 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
11338 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
11340 wy75-vb|wyse75-vb|wyse 75 with visible bell,
11343 wy75-w|wyse75-w|wyse 75 in 132 column mode,
11345 rs2=\E[35h\E[?3h$<80>, use=wy75,
11346 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
11350 # Wyse 85 emulating a vt220 7 bit mode.
11351 # 24 line screen with status line.
11353 # The vt220 mode permits more function keys but it wipes out
11354 # the escape key. I strongly recommend that <f11> be set to
11356 # The terminal may have to be set for 8 data bits and 2 stop
11357 # bits for the arrow keys to work.
11358 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
11359 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
11360 # <dch> leave trash on the screen when used without XON/XOFF.
11362 wy85|wyse85|wyse 85,
11363 am, hs, mc5i, mir, msgr, xenl, xon,
11364 cols#80, it#8, lines#24, wsl#80,
11365 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11366 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11367 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
11368 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11369 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11370 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11371 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
11372 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
11373 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
11374 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
11375 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
11376 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
11377 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
11378 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
11379 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
11380 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
11381 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
11382 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
11383 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
11384 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
11385 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
11386 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
11387 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
11388 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
11389 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
11390 rs3=\E[?5l, sc=\E7,
11391 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11392 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11393 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11394 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11395 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
11397 # Wyse 85 with visual bell.
11398 wy85-vb|wyse85-vb|wyse 85 with visible bell,
11399 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
11401 # Wyse 85 in 132-column mode.
11402 wy85-w|wyse85-w|wyse 85 in 132-column mode,
11404 rs2=\E[35h$<70/>\E[?3h, use=wy85,
11406 # Wyse 85 in 132-column mode with visual bell.
11407 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
11410 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
11411 # This copes with an apparent firmware bug in the wy85. He writes:
11412 # "What I did was change leave the terminal cursor keys set to Normal
11413 # (instead of application), and change \E[ to \233 for all the keys in
11414 # terminfo. At one point, I found some reference indicating that this
11415 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
11416 # me), but I can't find that and the server under my bookmark to "Wyse
11417 # Technical" isn't responding. So there's the question of whether the wy85
11418 # terminfo should reflect the manufacturer's intended behaviour of the terminal
11420 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
11421 am, hs, mc5i, mir, msgr, xenl, xon,
11422 cols#80, it#8, lines#24, wsl#80,
11423 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11424 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11425 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
11426 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11427 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11428 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11429 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
11430 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
11431 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
11432 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
11433 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
11434 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
11435 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
11436 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
11437 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
11438 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
11439 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
11440 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
11441 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
11442 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
11443 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
11444 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
11445 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
11446 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
11447 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
11448 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
11449 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
11450 rs3=\E[?5l, sc=\E7,
11451 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11452 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
11453 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
11454 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11455 tsl=\E[40h\E7\E[25;%i%p1%dH,
11457 # Wyse 185 emulating a vt320 7 bit mode.
11459 # This terminal always displays 25 lines. These lines may be used
11460 # as 24 data lines and a terminal status line (top or bottom) or
11461 # 25 data lines. The 48 and 50 line modes change the page size
11462 # and not the number of lines on the screen.
11464 # The Compose Character key can be used as a meta key if changed
11467 wy185|wyse185|wyse 185,
11468 am, hs, km, mc5i, mir, msgr, xenl, xon,
11469 cols#80, it#8, lines#24, wsl#80,
11470 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11471 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11472 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11473 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
11474 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11475 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11476 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
11477 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
11478 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
11479 el=\E[K, el1=\E[1K, enacs=\E)0,
11480 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
11481 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
11482 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
11483 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
11484 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
11485 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
11486 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
11487 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
11488 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
11489 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
11490 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
11491 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
11492 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
11493 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
11494 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
11495 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
11496 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
11497 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
11498 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11499 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11500 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
11501 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
11502 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
11505 # Wyse 185 with 24 data lines and top status (terminal status)
11506 wy185-24|wyse185-24|wyse 185 with 24 data lines,
11508 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11511 # Wyse 185 with visual bell.
11512 wy185-vb|wyse185-vb|wyse 185+flash,
11515 # Wyse 185 in 132-column mode.
11516 wy185-w|wyse185-w|wyse 185 in 132-column mode,
11518 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11519 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
11521 # Wyse 185 in 132-column mode with visual bell.
11522 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
11525 # wy325 terminfo entries
11526 # Done by Joe H. Davis 3-9-92
11528 # lines 25 columns 80
11530 wy325|wyse325|Wyse epc,
11531 am, bw, hs, mc5i, mir,
11532 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
11533 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11534 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
11535 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11536 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
11537 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
11538 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
11539 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
11540 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
11542 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11543 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11544 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11545 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11546 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11547 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
11548 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
11549 mc0=\EP, mc4=^T, mc5=\Ed#,
11550 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11551 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11552 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
11553 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
11554 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
11555 rs3=\EwG\Ee($<100>,
11556 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11557 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11558 %{64}%|%;%?%p7%t%{1}%|%;%c,
11559 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11560 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
11561 tsl=\EF, use=adm+sgr,
11564 # lines 24 columns 80 vb
11566 wy325-vb|wyse325-vb|wyse-325 with visual bell,
11570 # lines 24 columns 132
11572 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
11573 cols#132, lw#7, nlab#16, wsl#97,
11574 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
11575 rs2=\E`;$<70>, use=wy325,
11577 # lines 25 columns 80
11579 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
11580 lh@, lines#25, lw@, nlab@,
11581 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11583 # lines 25 columns 132
11585 wy325-25w|wyse325-25w|wy325 132 columns,
11586 lh@, lines#25, lw@, nlab@,
11587 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11589 # lines 25 columns 132 vb
11591 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
11595 # lines 42 columns 80
11597 wy325-42|wyse325-42|wyse-325 42 lines,
11598 lh@, lines#42, lw@, nlab@,
11599 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11601 # lines 42 columns 132
11603 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
11604 lh@, lines#42, lw@, nlab@,
11605 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11607 # lines 42 columns 132 vb
11609 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
11612 # lines 43 columns 80
11614 wy325-43|wyse325-43|wyse-325 43 lines,
11615 lh@, lines#43, lw@, nlab@,
11618 # lines 43 columns 132
11620 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
11621 lh@, lines#43, lw@, nlab@,
11622 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11624 # lines 43 columns 132 vb
11626 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
11629 # Wyse 370 -- 24 line screen with status line.
11631 # The terminal may have to be set for 8 data bits and 2 stop
11632 # bits for the arrow keys to work.
11634 # If you change keyboards the terminal will send different
11635 # escape sequences.
11636 # The following definition is for the basic terminal without
11639 # <u0> -> enter Tektronix 4010/4014 mode
11640 # <u1> -> exit Tektronix 4010/4014 mode
11641 # <u2> -> enter ASCII mode (from any ANSI mode)
11642 # <u3> -> exit ASCII mode (goto native ANSI mode)
11643 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
11644 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
11646 # Bug: The <op> capability resets attributes.
11647 wy370-nk|wyse 370 without function keys,
11648 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
11649 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
11650 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11651 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11652 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11653 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11654 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11655 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11656 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
11657 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
11658 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
11659 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
11660 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
11661 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
11662 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
11664 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
11665 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
11666 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
11667 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
11669 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
11670 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
11671 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
11673 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
11674 \E[66;5;51w\E[66;6;61w\E[66;7;64w,
11675 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
11676 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
11677 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
11678 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
11679 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
11680 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11681 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11682 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
11683 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
11684 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
11685 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
11686 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
11688 # Function key set for the ASCII (wy-50 compatible) keyboard
11689 # This is the default 370.
11691 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
11692 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11693 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
11694 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
11695 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
11696 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
11697 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
11698 knp=\E[U, kpp=\E[V, use=wy370-nk,
11700 # Function key set for the VT-320 (and wy85) compatible keyboard
11702 wy370-105k|Wyse 370 with 105 key keyboard,
11703 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11704 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
11705 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
11706 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
11707 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
11708 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
11709 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
11710 use=wy370-nk, use=vt220+keypad,
11712 # Function key set for the PC compatible keyboard
11714 wy370-EPC|Wyse 370 with 102 key keyboard,
11715 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11716 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
11717 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
11718 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
11719 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
11721 # Wyse 370 with visual bell.
11722 wy370-vb|Wyse 370 with visible bell,
11725 # Wyse 370 in 132-column mode.
11726 wy370-w|Wyse 370 in 132-column mode,
11728 rs2=\E[35h\E[?3h$<70>, use=wy370,
11730 # Wyse 370 in 132-column mode with visual bell.
11731 wy370-wvb|Wyse 370 with visible bell 132-columns,
11732 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
11733 wy370-rv|Wyse 370 reverse video,
11734 rs3=\E[32h\E[?5h, use=wy370,
11736 # Wyse 99gt Tektronix 4010/4014 emulator,
11738 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
11741 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
11742 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11743 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11744 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11745 %{31}%&%{64}%+%c\037,
11747 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11750 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11752 is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
11754 # Wyse 160 Tektronix 4010/4014 emulator,
11756 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
11757 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11758 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11759 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11760 %{31}%&%{64}%+%c\037,
11761 home=^]8`g @\037, use=wy99gt-tek,
11763 # Wyse 370 Tektronix 4010/4014 emulator,
11765 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
11768 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
11769 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
11770 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
11771 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
11773 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11776 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11778 is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
11779 nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
11781 # Vendor-supplied Wyse entries end here.
11784 #TITLE: TERMINFO ENTRY WY520
11786 # The WY520 terminfo is based on the WY285 entry published on the WYSE
11787 # BBS with the addition of more function keys and special keys.
11789 # rs1 -> set personality
11790 # rs2 -> set number of columns
11791 # rs3 -> set number of lines
11792 # is1 -> select the proper font
11793 # is2 -> do the initialization
11794 # is3 -> If this string is empty then rs3 gets sent.
11796 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
11797 # - The BS key is programmed to generate BS in smcup since
11798 # is2 doesn't seem to work.
11799 # - Remove and shift/Remove: delete a character
11800 # - Insert : enter insert mode
11801 # - Find : delete to end of file
11802 # - Select : clear a line
11803 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
11805 # - Bottom status line (host writable line) is used.
11806 # - smkx,rmkx are removed because this would put the numeric
11807 # keypad in Dec application mode which doesn't seem to work
11808 # with SCO applications.
11810 wy520|wyse520|wyse 520,
11811 am, hs, km, mc5i, mir, xenl, xon,
11812 cols#80, it#8, lines#24, wsl#80,
11813 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11814 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11815 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11816 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
11817 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11818 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11819 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
11820 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
11821 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
11822 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
11823 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
11824 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
11825 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
11826 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
11827 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
11828 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
11829 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
11830 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
11831 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
11832 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
11833 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
11834 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
11835 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
11836 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
11837 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
11838 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
11839 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11840 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11841 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
11842 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11843 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
11844 vpa=\E[%i%p1%dd, use=vt220+keypad,
11846 # Wyse 520 with 24 data lines and status (terminal status)
11847 wy520-24|wyse520-24|wyse 520 with 24 data lines,
11849 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11852 # Wyse 520 with visual bell.
11853 wy520-vb|wyse520-vb|wyse 520 with visible bell,
11854 flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
11856 # Wyse 520 in 132-column mode.
11857 wy520-w|wyse520-w|wyse 520 in 132-column mode,
11859 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11860 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
11862 # Wyse 520 in 132-column mode with visual bell.
11863 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
11864 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
11867 # Wyse 520 emulating a vt420 7 bit mode.
11868 # The DEL key is programmed to generate BS in is2.
11869 # With EPC keyboard.
11870 # - 'End' key will clear till end of line on EPC keyboard
11871 # - Shift/End : ignored.
11872 # - Insert : enter insert mode.
11873 # - Delete : delete a character (have to change interrupt character
11874 # to CTRL-C: stty intr '^c') for it to work since the
11875 # Delete key sends 7FH.
11876 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
11877 kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
11878 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
11881 # Wyse 520 with 24 data lines and status (terminal status)
11882 # with EPC keyboard.
11883 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
11885 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11888 # Wyse 520 with visual bell.
11889 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
11890 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
11892 # Wyse 520 in 132-column mode.
11893 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
11895 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11896 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
11898 # Wyse 520 in 132-column mode with visual bell.
11899 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
11900 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
11902 # Wyse 520 in 80-column, 36 lines
11903 wy520-36|wyse520-36|wyse 520 with 36 data lines,
11906 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
11909 # Wyse 520 in 80-column, 48 lines
11910 wy520-48|wyse520-48|wyse 520 with 48 data lines,
11913 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
11916 # Wyse 520 in 132-column, 36 lines
11917 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
11920 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
11923 # Wyse 520 in 132-column, 48 lines
11924 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
11927 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
11931 # Wyse 520 in 80-column, 36 lines with EPC keyboard
11932 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
11935 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
11938 # Wyse 520 in 80-column, 48 lines with EPC keyboard
11939 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
11942 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
11945 # Wyse 520 in 132-column, 36 lines with EPC keyboard
11946 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
11949 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
11952 # Wyse 520 in 132-column, 48 lines with EPC keyboard
11953 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
11956 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
11959 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
11960 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
11961 # file and we don't know what <hts> is -- esr)
11962 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
11964 cols#80, it#8, lines#24,
11965 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
11966 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
11967 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
11968 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
11969 kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
11970 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
11973 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
11974 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
11975 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11976 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
11979 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
11980 wy100q|Wyse 100 for Quotron,
11982 cols#80, lines#24, xmc#1,
11983 cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
11984 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11985 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
11986 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
11987 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
11989 #### Kermit terminal emulations
11991 # Obsolete Kermit versions may be listed in the section describing obsolete
11992 # non-ANSI terminal emulators later in the file.
11995 # KERMIT standard all versions.
11996 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
11997 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
11998 # From: greg small <gts@populi.berkeley.edu> 9-25-84
11999 kermit|standard kermit,
12002 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
12003 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
12004 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
12005 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
12006 kermit-am|standard kermit plus auto-margin,
12008 is2=K1 Standard Kermit plus Automatic Margins\n,
12010 # IBMPC Kermit 1.2.
12011 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
12012 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
12014 # From: greg small <gts@populi.berkeley.edu> 8-30-84
12015 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
12018 clear=\EH\EJ, ed@, el@,
12019 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
12020 # IBMPC Kermit 1.20
12021 # Cannot use line 25, now acts funny like ansi special scrolling region.
12022 # Initialization must escape from that region by cursor position to line 24.
12023 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
12024 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
12025 # From: greg small <gts@populi.berkeley.edu> 12-19-84
12026 pckermit120|UCB IBMPC Kermit 1.20,
12028 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
12030 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
12032 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
12033 # MS-DOS Kermit 2.27 for the IBMPC
12034 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
12035 # Cannot use line 25, now acts funny like ansi special scrolling region.
12036 # Initialization must escape from that region by cursor position to line 24.
12037 # Does not use am: because autowrap is lost when kermit dropped and restarted.
12038 # Reverse video for standout like H19.
12039 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
12040 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12041 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
12043 cols#80, it#8, lines#24,
12044 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
12045 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
12046 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
12047 home=\EH, ht=^I, il1=\EL,
12048 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
12049 \sIBMPC\s3-17-85\n,
12050 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
12051 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
12052 # MS-DOS Kermit 2.27 with automatic margins
12053 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12054 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
12056 cvvis=\EO\Eq\EG\EvK5,
12057 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
12058 \smargins\s3-17-85\n,
12060 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
12061 # Automatic margins now default. Use ansi <sgr> for highlights.
12062 # Define function keys.
12063 # (msk22714: removed obsolete ":kn#10:" -- esr)
12064 # From: greg small <gts@populi.berkeley.edu> 3-17-85
12065 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
12067 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
12068 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
12069 \sIBM\sPC\s3-17-85\n,
12070 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
12071 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
12072 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
12073 # This was designed for a VT320 emulator, but it is probably a good start
12074 # at support for the VT320 itself.
12075 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
12076 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
12077 vt320-k3|MS-Kermit 3.00's vt320 emulation,
12078 am, eslok, hs, km, mir, msgr, xenl,
12079 cols#80, it#8, lines#49, pb#9600, vt#3,
12080 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12081 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12082 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=\r,
12083 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12084 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12085 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12086 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12087 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
12088 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
12090 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
12091 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12092 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
12093 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
12094 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
12095 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
12096 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8,
12097 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
12098 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
12099 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
12100 \E[4i\E[?4i\E[m\E[r\E[2$~,
12101 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
12102 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12103 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
12104 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
12105 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
12106 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
12107 vt320-k311|dec vt320 series as defined by kermit 3.11,
12108 am, eslok, hs, mir, msgr, xenl, xon,
12109 cols#80, it#8, lines#24, vt#3,
12110 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12111 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12112 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=\r,
12113 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12114 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12115 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12116 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12117 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
12118 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
12119 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
12121 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
12122 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12123 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
12124 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
12125 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
12126 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
12127 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
12128 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
12129 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
12130 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
12132 ######## NON-ANSI TERMINAL EMULATIONS
12137 # These entries attempt to describe Avatar, a terminal emulation used with
12138 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
12139 # capabilities, but with cheaper (shorter) control sequences. Messy design,
12140 # excessively dependent on PC idiosyncrasies, but apparently rather popular
12141 # in the BBS world.
12143 # No color support. Avatar doesn't fit either of the Tektronix or HP color
12144 # models that terminfo knows about. An Avatar color attribute is the
12145 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
12147 # I wrote these entries while looking at the Avatar spec. I don't have
12148 # the facilities to test them. Let me know if they work, or don't.
12150 # Avatar escapes not used by these entries (because maybe you're smarter
12151 # and more motivated than I am and can figure out how to wrap terminfo
12152 # around some of them, and because they are weird enough to be funny):
12154 # ^L -- clear window/reset current attribute to default
12155 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
12157 # bit: 6 5 4 3 2 1 0
12159 # +---+---+ | +---+---+
12161 # | | foreground color
12162 # | foreground intensity
12165 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
12166 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
12167 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
12168 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
12169 # (^V^L and ^V^M set the current attribute as a side-effect.)
12170 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
12171 # in the pattern, <c> the number of times the pattern
12172 # should be repeated. If either value is 0, no-op.
12173 # The pattern can contain Avatar console codes,
12174 # including other ^V ^Y patterns.
12176 # ^V^O -- clockwise mode on; turn print direction right each time you
12177 # hit a window edge (yes, really). Turned off by CR
12179 # ^V^Q%c -- query the driver
12180 # ^V^R -- driver reset
12181 # ^V^S -- Sound tone (PC-specific)
12182 # ^V^T -- change highlight at current cursor position to %c
12183 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
12184 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
12187 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12188 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
12189 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
12190 # which is the only method that will actually work for multiple highlights.)
12192 # Update by TD - 2004: half of this was inconsistent. Found documentation
12193 # and repaired most of the damage. sgr0 is probably incorrect, but the
12194 # available documentation gives no clues for a workable string.
12195 avatar0|avatar terminal emulator level 0,
12197 cols#80, it#8, lines#25,
12198 blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
12199 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
12200 ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
12202 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
12203 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
12204 %{16}%|%;%;%c%;%?%p4%t\026\002%;,
12205 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
12207 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12208 avatar0+|avatar terminal emulator level 0+,
12209 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
12210 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
12211 avatar|avatar1|avatar terminal emulator level 1,
12212 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
12213 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
12217 # RBComm is a lean and mean terminal emulator written by the Interrupt List
12218 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
12219 # '90s), especially in the BBS world, and still has some loyal users due to
12220 # its very small memory footprint and to a cute macro language.
12221 rbcomm|IBM PC with RBcomm and EMACS keybindings,
12222 am, bw, mir, msgr, xenl,
12223 cols#80, it#8, lines#25,
12224 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12225 clear=^L, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12226 cub1=^H, cud1=^C, cuf1=^B,
12227 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
12228 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
12229 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
12230 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
12231 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
12232 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
12233 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
12234 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
12235 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
12236 rbcomm-nam|IBM PC with RBcomm without autowrap,
12238 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
12239 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
12240 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
12241 rbcomm-w|IBM PC with RBcomm in 132 column mode,
12243 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
12244 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
12245 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
12247 ######## LCD DISPLAYS
12250 #### Matrix Orbital
12251 # from: Eric Z. Ayers (eric@ale.org)
12253 # Matrix Orbital 20x4 LCD display
12254 # Command Character is 0xFE (decimal 254, octal 376)
12256 # On this device, cursor addressability isn't possible. The LCD expects:
12257 # 0xfe G <col> <row>
12258 # for cup: %p1 == row and %p2 is column
12261 # cup=\376G%p2%c%p1%c
12262 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
12263 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
12265 # Alas, there is no cursor upline capability on this display.
12267 # These entries add some 'sanity stuff' to the clear function. That is, it
12268 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
12269 # and turns off the cursor blinking and stuff like that.
12271 # NOTE: calling 'beep' turns on the backlight (bell)
12272 # NOTE: calling 'flash' turns it on and back off (visual bell)
12274 MtxOrb|Generic Matrix Orbital LCD display,
12275 bel=\376B\001, clear=\376X\376C\376R\376K\376T,
12276 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
12277 flash=\376B\001$<200>\376F, home=\376H,
12278 MtxOrb204|20x4 Matrix Orbital LCD display,
12279 cols#20, lines#4, use=MtxOrb,
12280 MtxOrb162|16x2 Matrix Orbital LCD display,
12281 cols#16, lines#2, use=MtxOrb,
12284 ######## OLDER TERMINAL TYPES
12286 # This section is devoted to older commercial terminal brands that are now
12287 # discontinued, but known to be still in use or represented by emulations.
12290 #### AT&T (att, tty)
12292 # This section also includes Teletype-branded VDTs.
12294 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
12295 # Boundless Technologies); for details, see the header comment on the ADDS
12298 # These are AT&T's official terminfo entries. All-caps aliases have been
12301 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
12302 am, eo, mir, msgr, xon,
12303 cols#80, it#8, lines#24,
12304 bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
12305 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12306 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12307 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12308 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
12309 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
12310 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12311 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
12312 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
12313 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
12314 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
12315 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
12316 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
12318 att2350|AT&T 2350 Video Information Terminal 80 column mode,
12319 mc0@, mc4@, mc5@, use=att2300,
12321 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
12322 # Seems upward compatible with vt100, plus ins/del line/char.
12323 # On sgr, the protection parameter is ignored.
12324 # No check is made to make sure that only 3 parameters are output.
12325 # standout= reverse + half-intensity = 3 | 5.
12326 # bold= reverse + underline = 2 | 3.
12327 # note that half-bright blinking doesn't look different from normal blinking.
12328 # NOTE:you must program the function keys first, label second!
12329 # (att4410: a BSD entry has been seen with the following capabilities:
12330 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
12331 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
12332 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
12333 am, hs, mir, msgr, xon,
12334 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12335 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
12337 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
12338 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
12339 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
12340 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
12341 ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
12342 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
12343 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
12344 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
12345 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
12346 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
12347 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
12349 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12350 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
12351 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
12352 ll=\E[24H, nel=\r\n,
12353 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
12355 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
12356 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
12358 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12359 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12360 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
12361 tsl=\E7\E[25;%p1%{1}%+%dH,
12363 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
12365 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
12367 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
12369 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
12372 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
12374 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
12376 # 5410 in terms of a vt100
12377 # (v5410: added <rmam>/<smam> based on init string -- esr)
12378 v5410|att5410 in terms of a vt100,
12379 am, mir, msgr, xon,
12380 cols#80, it#8, lines#24, vt#3,
12381 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12382 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
12383 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
12384 cub1=^H, cud1=\n, cuf1=\E[C$<2>,
12385 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
12386 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
12387 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
12388 il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
12389 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
12390 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
12391 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
12393 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
12394 %;m%?%p9%t\016%e\017%;$<2>,
12395 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
12396 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
12400 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
12401 # even! the 5420 has three modes: scroll, window or page mode
12402 # this terminfo should work in scroll or window mode, but doesn't
12403 # take advantage of any of the differences between them.
12405 # Has memory below (2 lines!)
12406 # 3 pages of memory (plus some spare)
12407 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
12408 # <hpa>, <hts> would work for these, but these work in both scroll and window
12409 # mode... Unset insert character so insert mode works
12410 # <is1> sets 80 column mode,
12411 # <is2> escape sequence:
12412 # 1) turn off all fonts
12413 # 2) function keys off, keyboard lock off, control display off,
12414 # insert mode off, erasure mode off,
12415 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
12416 # 4) reset origin mode
12417 # 5) set line wraparound
12418 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
12420 # 8) program ENTER to transmit ^J,
12421 # We use \212 to program the ^J because a bare ^J will get translated by
12422 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
12424 # <is3> set screen color to black,
12425 # No representation in terminfo for the delete word key: kdw1=\Ed
12426 # Key capabilities assume the power-up send sequence...
12427 # This <rmcup> is not strictly necessary, but it helps maximize
12428 # memory usefulness: <rmcup=\Ez>,
12429 # Alternate sgr0: <sgr0=\E[m\EW^O>,
12430 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
12431 # smkx programs the SYS PF keys to send a set sequence.
12432 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
12433 # This string causes them to send the strings <kf1>-<kf8>
12434 # when pressed in SYS PF mode.
12435 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
12436 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
12437 OTbs, db, mir, xon,
12438 lh#2, lm#78, lw#8, nlab#8, wsl#55,
12439 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
12440 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
12441 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
12442 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
12443 flash=\E[?5h$<200>\E[?5l, home=\E[x,
12444 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
12445 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
12446 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
12447 \E[4i\Ex\E[21;1j\212,
12448 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
12449 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
12450 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
12451 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
12452 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
12453 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
12454 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
12455 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
12456 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
12457 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
12458 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
12459 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12460 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
12461 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
12462 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
12463 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
12466 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
12467 cols#132, lm#54, wsl#97,
12468 is1=\E[?3h$<100>, use=att4415,
12470 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
12471 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
12473 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
12474 cols#132, lm#54, wsl#97,
12475 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
12478 # Note that this mode permits programming USER PF KEYS and labels
12479 # However, when you program user pf labels you have to reselect
12480 # user pf keys to make them appear!
12481 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
12482 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
12483 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12485 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
12487 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
12488 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12491 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
12492 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12495 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
12496 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12499 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
12500 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
12503 att5420_2|AT&T 5420 model 2 80 cols,
12504 am, db, hs, mir, msgr, xon,
12505 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
12506 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12507 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
12508 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12509 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
12510 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
12511 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12512 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
12513 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
12514 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
12515 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12516 indn=\E[%p1%dE, invis=\E[8m,
12517 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
12518 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
12520 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
12521 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
12522 kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
12523 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
12524 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
12525 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
12526 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
12527 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
12528 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
12530 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
12531 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
12532 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
12534 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
12535 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;,
12536 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
12537 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12538 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
12539 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
12541 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
12542 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
12546 att4418|att5418|AT&T 5418 80 cols,
12549 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12550 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD,
12551 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12552 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12553 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
12554 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
12555 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n,
12556 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
12557 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
12558 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
12559 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
12560 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
12561 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
12562 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
12563 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
12564 att4418-w|att5418-w|AT&T 5418 132 cols,
12566 is1=\E[?3h, use=att5418,
12568 att4420|tty4420|teletype 4420,
12569 OTbs, da, db, eo, msgr, ul, xon,
12570 cols#80, lines#24, lm#72,
12571 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
12572 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
12573 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
12574 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
12575 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
12576 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
12577 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
12578 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
12580 # The following is a terminfo entry for the Teletype 4424
12581 # asynchronous keyboard-display terminal. It supports
12582 # the vi editor. The terminal must be set up as follows,
12584 # HIGHLIGHT DEFINITION 3-TONE
12585 # DISPLAY FUNCTION GROUP III
12587 # The second entry below provides limited (a la adm3a)
12588 # operation under GROUP II.
12590 # This must be used with DISPLAY FUNCTION GROUP I or III
12591 # and HIGHLIGHT DEFINITION 3-TONE
12592 # The terminal has either bold or blink, depending on options
12594 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
12595 att4424|tty4424|teletype 4424,
12598 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12599 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
12600 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12601 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
12602 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
12603 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
12604 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
12605 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h,
12606 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12607 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
12608 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
12610 sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%|
12611 %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;,
12612 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
12615 att4424-1|tty4424-1|teletype 4424 in display function group I,
12616 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
12619 # This entry is not one of AT&T's official ones, it was translated from the
12620 # 4.4BSD termcap file. The highlight strings are different from att4424.
12621 # I have no idea why this is -- older firmware version, maybe?
12622 # The following two lines are the comment originally attached to the entry:
12623 # This entry appears to avoid the top line - I have no idea why.
12624 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
12625 att4424m|tty4424m|teletype 4424M,
12627 cols#80, it#8, lines#23,
12628 bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
12629 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
12630 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
12631 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
12632 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12633 kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m,
12634 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
12636 # The Teletype 5425 is really version 2 of the Teletype 5420. It
12637 # is quite similar, except for some minor differences. No page
12638 # mode, for example, so all of the <cup> sequences used above have
12639 # to change back to what's being used for the 5410. Many of the
12640 # option settings have changed their numbering as well.
12642 # This has been tested on a preliminary model.
12644 # (att5425: added <rmam>/<smam> based on the init string -- esr)
12645 att5425|tty5425|att4425|AT&T 4425/5425,
12646 am, da, db, hs, mir, msgr, xenl, xon,
12647 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
12648 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12649 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12650 clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
12651 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12652 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12653 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12654 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12655 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
12656 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
12657 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
12658 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12659 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
12660 invis=\E[8m, is1=\E<\E[?3l$<100>,
12661 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
12662 \E[4i\Ex\E[25;1j\212,
12663 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
12664 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12665 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
12666 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
12667 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
12668 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
12670 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12671 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
12672 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
12673 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
12674 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
12675 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12676 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
12677 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12678 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
12679 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
12680 vpa=\E[%p1%{1}%+%dd,
12682 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
12683 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
12685 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
12686 cols#132, lm#54, wsl#97,
12687 is1=\E[?3h$<100>, use=tty5425,
12689 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
12690 # I also added <rmam>/<smam> -- esr)
12691 att4426|tty4426|teletype 4426S,
12693 cols#80, lines#24, lm#48,
12694 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12695 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
12696 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
12697 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12698 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
12699 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
12700 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
12701 il=\E[%p1%dL, il1=\EL, ind=\n, indn=\E[%p1%dS,
12702 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
12703 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
12704 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
12705 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
12706 nel=\r\n, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
12707 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
12708 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
12709 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
12712 # Terminfo entry for the AT&T 510 A Personal Terminal
12713 # Function keys 9 - 16 are available only after the
12714 # screen labeled (soft keys/action blocks) are labeled. Function key
12715 # 9 corresponds to the leftmost touch target on the screen,
12716 # function key 16 corresponds to the rightmost.
12718 # This entry is based on one done by Ernie Rice at Summit, NJ and
12719 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
12720 att510a|bct510a|AT&T 510A Personal Terminal,
12721 am, mir, msgr, xenl, xon,
12722 cols#80, lh#2, lines#24, lw#7, nlab#8,
12723 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12724 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12725 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r,
12726 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12727 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12728 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
12729 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
12730 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
12731 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l,
12732 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
12733 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
12734 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
12735 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
12736 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
12737 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
12738 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
12739 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
12740 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12741 %|%t;7%;m%?%p9%t\016%e\017%;,
12742 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
12743 smul=\E[4m, tbc=\E[3g,
12745 # Terminfo entry for the AT&T 510 D Personal Terminal
12746 # Function keys 9 through 16 are accessed by bringing up the
12748 # Function key 9 corresponds to the leftmost touch target on the screen,
12749 # function key 16 corresponds to the rightmost.
12751 # There are problems with soft key labeling. These are due to
12752 # strangenesses in the native terminal that are impossible to
12753 # describe in a terminfo.
12754 att510d|bct510d|AT&T 510D Personal Terminal,
12755 am, da, db, mir, msgr, xenl, xon,
12756 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
12757 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12758 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12759 clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD,
12760 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12761 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12762 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
12763 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
12764 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
12765 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12766 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
12767 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
12768 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12769 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
12770 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
12771 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
12772 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
12773 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
12774 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
12775 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
12776 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
12777 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
12778 rs2=\E[5;0|, sc=\E7,
12779 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12780 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12781 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
12782 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
12783 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12785 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
12786 att500|att513|AT&T 513 using page mode,
12787 am, chts, mir, msgr, xenl, xon,
12788 cols#80, lh#2, lines#24, lw#8, nlab#8,
12789 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12790 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12791 clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
12792 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12793 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12794 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12795 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
12796 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12797 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
12798 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12799 indn=\E[%p1%dE, invis=\E[8m,
12800 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
12801 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12802 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12803 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
12804 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
12805 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
12806 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
12807 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
12808 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12809 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
12810 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
12811 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
12812 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
12813 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
12814 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
12815 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
12816 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
12817 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
12819 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12821 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12823 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
12824 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
12825 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
12826 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
12827 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
12829 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
12830 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
12831 rs2=\E[5;0|, sc=\E7,
12832 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12833 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12834 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
12835 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
12836 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12839 # printer must be set to EMUL ANSI to accept ESC codes
12840 # <cuu1> stops at top margin
12841 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
12842 # and alt font ascii,wrap on,tabs cleared
12843 # <is2> disables newline on LF,Emphasized off
12844 # The <u0> capability sets form length
12845 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
12847 bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10,
12848 orhi#100, orl#12, orvi#72,
12849 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
12850 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
12851 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
12854 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
12855 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
12856 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
12857 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
12858 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
12859 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
12861 cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
12862 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
12863 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
12864 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
12866 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
12867 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
12868 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
12869 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
12870 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
12872 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
12873 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
12874 u0=\E[%p1%dt, vpa=\E[%p1%dd,
12876 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
12877 # The following SET-UP modes are assumed for normal operation:
12878 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
12879 # Other SET-UP modes may be set for operator convenience or communication
12880 # requirements. This termcap description is for the Resident Terminal Mode.
12881 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12882 # The BRL entry also said: UNSAFE :ll=\E[70H:
12883 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
12885 cols#88, it#8, lines#70, vt#3,
12886 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
12887 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
12888 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
12889 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
12890 il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
12891 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12892 kll=\E[70;1H, nel=\r\n, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
12895 # 5620 terminfo (2.0 or later ROMS with char attributes)
12896 # The following SET-UP modes are assumed for normal operation:
12897 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
12898 # Other SET-UP modes may be set for operator convenience or communication
12899 # requirements. This termcap description is for Resident Terminal Mode. No
12900 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12901 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
12902 # Be aware that older versions of the dmd have a firmware bug that affects
12903 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
12904 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
12905 # also has <ll>=\E[70H commented out and marked unsafe.
12906 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
12907 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
12908 OTbs, am, msgr, npc, xon,
12909 cols#88, it#8, lines#70,
12910 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
12911 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12912 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
12913 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
12914 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
12915 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
12916 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\n,
12917 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
12918 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
12919 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
12920 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
12921 lines#24, use=att5620,
12922 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
12923 lines#34, use=att5620,
12924 # 5620 layer running the "S" system's downloaded graphics handler:
12925 att5620-s|tty5620-s|layer|vitty|5620 S layer,
12927 cols#80, it#8, lines#72,
12928 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
12929 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
12930 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J,
12931 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12934 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
12936 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
12937 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
12938 att605|AT&T 605 80 column 102key keyboard,
12940 cols#80, lines#24, lw#8, nlab#8, wsl#80,
12941 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12942 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
12943 cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
12944 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
12945 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12946 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12947 il1=\E[L, ind=\n, invis=\E[8m,
12948 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
12949 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
12950 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12951 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
12952 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
12953 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
12954 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
12955 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
12956 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
12957 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
12958 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
12959 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
12960 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
12961 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
12962 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12963 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12964 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12965 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
12966 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
12967 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
12968 tsl=\E7\E[25;%i%p1%dx,
12969 att605-pc|ATT 605 in pc term mode,
12970 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
12972 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
12973 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
12974 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12975 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
12976 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
12977 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
12978 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
12979 xoffc=g, xonc=e, use=att605,
12980 att605-w|AT&T 605-w 132 column 102 key keyboard,
12982 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
12983 # (att610: I added <rmam>/<smam> based on the init string. I also
12984 # added <indn> and <rin> because the BSD file says the att615s have them,
12985 # and the 615 is like a 610 with a big keyboard, and most of their other
12986 # smart terminals support the same sequence -- esr)
12987 att610|AT&T 610; 80 column; 98key keyboard,
12988 am, eslok, hs, mir, msgr, xenl, xon,
12989 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12990 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12991 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12992 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
12993 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12994 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12995 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12996 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12997 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12998 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
12999 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
13000 indn=\E[%p1%dS, invis=\E[8m,
13001 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
13002 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
13003 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13004 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
13005 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
13006 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
13007 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
13009 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
13010 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
13011 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
13012 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
13013 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13014 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13015 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
13016 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
13017 att610-w|AT&T 610; 132 column; 98key keyboard,
13019 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13022 att610-103k|AT&T 610; 80 column; 103key keyboard,
13023 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
13024 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
13025 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
13026 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
13027 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
13028 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
13029 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
13030 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
13031 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
13032 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
13033 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
13034 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
13035 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
13036 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
13038 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13040 att615|AT&T 615; 80 column; 98key keyboard,
13041 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13042 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
13043 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
13044 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
13045 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
13046 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13047 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
13048 att615-w|AT&T 615; 132 column; 98key keyboard,
13049 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13050 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
13051 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
13052 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
13053 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
13054 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13055 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
13056 att615-103k|AT&T 615; 80 column; 103key keyboard,
13057 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
13058 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
13059 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
13060 # (att620: I added <rmam>/<smam> based on the init string and
13061 # <rin>/<indn> from a BSD termcap -- esr)
13062 att620|AT&T 620; 80 column; 98key keyboard,
13063 am, eslok, hs, mir, msgr, xenl, xon,
13064 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13065 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13066 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13067 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13068 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13069 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13070 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13071 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13072 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13073 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
13074 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
13075 indn=\E[%p1%dS, invis=\E[8m,
13076 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
13077 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
13078 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13079 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
13080 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
13081 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
13082 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
13083 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
13084 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
13085 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
13086 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
13087 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
13088 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
13089 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13090 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
13091 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
13092 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
13093 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
13094 rs2=\Ec\E[?3l, sc=\E7,
13095 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13096 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
13097 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
13098 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
13099 tsl=\E7\E[25;%i%p1%dx,
13100 att620-w|AT&T 620; 132 column; 98key keyboard,
13102 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13104 att620-103k|AT&T 620; 80 column; 103key keyboard,
13105 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
13106 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
13107 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
13108 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
13109 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
13110 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
13111 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
13112 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
13113 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
13114 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
13115 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
13116 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
13117 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
13118 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
13119 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
13120 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
13122 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
13124 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
13127 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
13128 # The following SETUP modes are assumed for normal operation:
13129 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
13130 # Font_Size=Large Non-Layers_Window_Cols=80
13131 # Non-Layers_Window_Rows=60
13132 # Other SETUP modes may be set for operator convenience or communication
13133 # requirements. Some capabilities assume a printer attached to the Aux EIA
13134 # port. This termcap description is for the Fixed Non-Layers Window. No
13135 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13136 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
13137 att630|AT&T 630 windowing terminal,
13138 OTbs, am, da, db, mir, msgr, npc, xon,
13139 cols#80, it#8, lines#60, lm#0,
13140 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r,
13141 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
13142 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13143 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
13144 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
13145 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
13146 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
13147 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
13148 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=\r,
13149 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
13150 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
13151 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
13152 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
13153 mc5=\E[?5i, nel=\r\n, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
13154 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
13155 rmul=\E[m, rs2=\Ec, sc=\E7,
13156 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
13158 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
13159 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
13160 lines#24, use=att630,
13162 # This is the att700 entry for 700 native emulation of the AT&T 700
13163 # terminal. Comments are relative to changes from the 605V2 entry and
13164 # att730 on which the entry is based. Comments show the terminfo
13165 # capability name, termcap name, and description.
13167 # Here is what's going onm in the init string:
13168 # ESC [ 50;4| set 700 native mode (really is 605)
13169 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
13170 # ESC [ 53;0| set GenFlow to Xon/Xoff
13171 # ESC [ 8 ;0| set CR on NL
13172 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
13173 # ESC [ ? 4 l jump scroll
13174 # ESC [ ? 5 l/h video: normal (l); reverse (h)
13175 # ESC [ ?13 l Labels on
13176 # ESC [ ?15 l parity check = no
13177 # ESC [ 13 l monitor mode off
13178 # ESC [ 20 l LF on NL (not CRLF on NL)
13179 # ESC [ ? 7 h autowrap on
13180 # ESC [ 12 h local echo off
13181 # ESC ( B GO = ASCII
13182 # ESC ) 0 G1 = Special Char & Line Drawing
13183 # ESC [ ? 31 l Set 7 bit controls
13185 # Note: Most terminals, especially the 600 family use Reverse Video for
13186 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
13187 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
13188 # standout mode with \E[m (all normal attributes). The 730 entry simply
13189 # exits reverse video which would leave other current attributes intact. It
13190 # was assumed the 730 entry to be more correct so rmso has changed. The
13191 # 605V2 has no sequences to turn individual attributes off, thus its setting
13192 # and the rmso/smso settings from the 730.
13194 # Note: For the same reason as above in rmso I changed exit under-score mode
13195 # to specifically turn off underscore, rather than return to all normal
13198 # Note: The following pkey_xmit is taken from the 605V2 which contained the
13199 # capability as pfxl. It was changed here to pfx since pfxl
13200 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
13201 # allows strings to be parameters and label values must be programmed as
13202 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
13203 # and strings to be parameters. The 605V2 pfx entry should be examined later
13204 # in this regard. For reference the 730 pfxl entry is shown here for comparison
13206 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
13207 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
13210 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
13213 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
13215 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
13219 # modular 10 pin Connector
13220 # Left side Right side
13221 # Pin 1 2 3 4 5 6 7 8 9 10
13223 # Key (notch) at bottom
13235 # The manual is 189 pages and is loaded with details about the escape codes,
13236 # etc..... Available from AT&T CIC 800-432-6600...
13237 # ask for Document number 999-300-660..
13239 att700|AT&T 700 24x80 column display w/102key keyboard,
13240 am, eslok, hs, mir, msgr, xenl, xon,
13241 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
13242 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13243 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13244 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13245 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13246 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13247 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13248 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13249 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13250 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
13251 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
13252 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
13253 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
13254 \E(B\E)0\E[?31l\E[0m\017,
13255 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
13256 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13257 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
13258 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
13259 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
13260 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
13261 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
13262 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
13263 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
13264 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
13265 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
13266 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
13267 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
13268 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13269 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
13270 \s\s\s\s\s\s%;%p2%s,
13271 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
13272 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
13273 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
13274 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
13275 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13276 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13277 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
13278 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
13279 tsl=\E7\E[99;%i%p1%dx,
13281 # This entry was modified 3/13/90 by JWE.
13282 # fixes include additions of <enacs>, correcting <rep>, and modification
13283 # of <kHOM>. (See comments below)
13284 # att730 has status line of 80 chars
13285 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
13286 # the <kf25> and up keys are used for shifted system Fkeys
13287 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
13288 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
13289 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
13290 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
13291 # 102, 102+1, or 122 key keyboards
13293 # (att730: I added <rmam>/<smam> based on the init string -- esr)
13294 att730|AT&T 730 windowing terminal,
13295 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
13296 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
13297 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13298 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
13299 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
13300 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13301 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13302 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13303 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
13304 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
13305 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
13306 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
13307 ind=\ED, invis=\E[8m,
13308 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
13309 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
13310 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13311 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
13312 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
13313 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
13314 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
13315 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
13316 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
13317 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
13318 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
13319 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
13320 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
13321 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
13322 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
13323 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
13324 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
13325 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
13326 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
13327 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
13328 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
13329 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
13330 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
13331 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
13332 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
13333 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
13334 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
13335 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
13336 lines#41, use=att730,
13337 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
13338 lines#24, use=att730,
13339 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
13340 flash=\E[?5l$<200>\E[?5h,
13341 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
13342 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
13343 lines#41, use=att730r,
13344 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
13345 lines#24, use=att730r,
13347 # The following represents the screen layout along with the associated
13348 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
13349 # not appear on the screen but are shown to reference the bezel buttons.
13350 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
13351 # position relative to the screen.
13355 # +----------------------------------------------------------------+
13357 # XXXX | kf0 kf24 | XXXX
13360 # XXXX | kf1 kf23 | XXXX
13363 # XXXX | kf2 kf22 | XXXX
13366 # XXXX | kf3 kf21 | XXXX
13369 # XXXX | kf4 kf20 | XXXX
13372 # XXXX | kf5 kf19 | XXXX
13375 # XXXX | kf6 kf18 | XXXX
13381 # +----------------------------------------------------------------+
13383 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
13385 # Note: XXXX represents the screen buttons
13391 # The character string sent by key 'kf26' may be user programmable
13392 # to send either \E[16s, or \E[26s.
13393 # The character string sent by key 'krfr' may be user programmable
13394 # to send either \E[17s, or \E[27s.
13396 # Depression of the "CMD" key sends \E! (kcmd)
13397 # Depression of the "MAIL" key sends \E[26s (kf26)
13398 # "REDRAW" same as "REFRESH" (krfr)
13400 # "kf" functions adds carriage return to output string if terminal is in
13403 # The following are functions not covered in the table above:
13405 # Set keyboard character (SKC): \EPn1;Pn2w
13406 # Pn1= 0 Back Space key
13408 # Pn2= Program char (hex)
13410 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
13411 # Pn1= Window number (1-39)
13412 # Pn2-Pn5= Y;X;Y;X coordinates
13414 # Screen Selection (SSL): \E[Pnu
13415 # Pn= Window number
13417 # Set Terminal Modes (SM): \E[Pnh
13418 # Pn= 3 Graphics mode
13419 # Pn= > Cursor blink
13420 # Pn= < Enter new line mode
13421 # Pn= = Enter reverse insert/replace mode
13422 # Pn= ? Enter no scroll mode
13424 # Reset Terminal Mode (RM): \E[Pnl
13425 # Pn= 3 Exit graphics mode
13426 # Pn= > Exit cursor blink
13427 # Pn= < Exit new line mode
13428 # Pn= = Exit reverse insert/replace mode
13429 # Pn= ? Exit no scroll mode
13431 # Screen Status Report (SSR): \E[Pnp
13432 # Pn= 0 Request current window number
13433 # Pn= 1 Request current window dimensions
13435 # Device Status Report (DSR): \E[6n Request cursor position
13437 # Call Status Report (CSR): \E[Pnv
13438 # Pn= 0 Call failed
13439 # Pn= 1 Call successful
13441 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
13442 # Pn1= Button number to be loaded
13443 # Pn2= Character count of "string"
13444 # Pn3= Key mode being loaded:
13448 # String= Text string (15 chars max)
13450 # Screen Number Report (SNR): \E[Pnp
13451 # Pn= Screen number
13453 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
13454 # Pn1= Number of rows available in window
13455 # Pn2= Number of columns available in window
13457 # Cursor Position Report (CPR): \E[Pn1;Pn2R
13458 # Pn1= "Y" Position of cursor
13459 # Pn2= "X" Position of cursor
13461 # Request Answer Back (RAB): \E[c
13463 # Answer Back Response (ABR): \E[?;*;30;VSV
13464 # *= 0 No printer available
13465 # *= 2 Printer available
13466 # V= Software version number
13467 # SV= Software sub version number
13468 # (printer-available field not documented in v1)
13470 # Screen Alignment Aid: \En
13472 # Bell (lower pitch): \E[x
13474 # Dial Phone Number: \EPdstring\
13475 # string= Phone number to be dialed
13477 # Set Phone Labels: \EPpstring\
13478 # string= Label for phone buttons
13480 # Set Clock: \EPchour;minute;second\
13482 # Position Clock: \EPsY;X\
13483 # Y= "Y" coordinate
13484 # X= "X" coordinate
13486 # Delete Clock: \Epr\
13488 # Programming The Function Buttons: \EPfPn;string\
13489 # Pn= Button number (00-06, 18-24)
13490 # (kf00-kf06, kf18-kf24)
13491 # string= Text to sent on button depression
13493 # The following in version 2 only:
13495 # Request For Local Directory Data: \EPp12;\
13497 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
13499 # Request for Local Directory Data in print format: \EPp13;\
13501 # Enable 'Prt on Line' mode: \022 (DC2)
13503 # Disable 'Prt on Line' mode: \024 (DC4)
13507 # The following Terminfo entry describes functions which are supported by
13508 # the AT&T 5430/pt505 terminal software version 2 and later.
13509 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
13511 cols#80, it#8, lines#24,
13512 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13513 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
13514 cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
13515 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13516 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13517 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13518 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
13519 il=\E[%p1%dL, il1=\E[L, ind=\n,
13520 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
13521 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13522 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
13523 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
13524 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
13525 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
13526 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
13527 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
13528 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
13529 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
13531 # The following Terminfo entry describes functions which are supported by
13532 # the AT&T 5430/pt505 terminal software version 1.
13533 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
13535 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
13536 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
13537 lines#22, use=att505,
13539 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
13540 # This cut mark helps make life less painful for people running ncurses tic
13541 # on machines with relatively little RAM. The file can be broken in half here
13542 # cleanly and compiled in sections -- no `use' references cross this cut
13546 #### Ampex (Dialogue)
13548 # Yes, these are the same people who are better-known for making audio- and
13549 # videotape. I'm told they are located in Redwood City, CA.
13552 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
13553 # (ampex80: some capabilities merged in from SCO's entry -- esr)
13554 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
13556 cols#80, it#8, lines#24,
13557 bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
13558 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13559 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
13560 ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
13561 smso=\Ej, smul=\El, tbc=\E3,
13562 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
13563 ampex175|ampex d175,
13566 bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
13567 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13568 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
13569 is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
13570 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
13571 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
13572 # No backspace key in the main QWERTY cluster. Fortunately, it has a
13573 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
13574 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
13575 # mode), this key can be used as the erase key; I find I like this. Because
13576 # some people and some systems may not, there is another termcap ("ampex175")
13577 # that suppresses this little eccentricity by omitting the relevant capability.
13578 ampex175-b|ampex d175 using left arrow for erase,
13579 kbs=^_, use=ampex175,
13580 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
13581 # (ampex210: removed obsolete ":kn#10:" -- esr)
13582 ampex210|a210|ampex a210,
13583 OTbs, am, hs, xenl,
13584 cols#80, it#8, lines#24, xmc#1,
13585 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
13586 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13587 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
13588 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
13589 if=/usr/share/tabset/std, il1=\EE, invis@,
13590 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
13591 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
13592 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
13593 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
13594 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
13595 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
13596 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
13597 # and moved the padding to be *after* the caps -- esr)
13598 ampex219|ampex-219|amp219|Ampex with Automargins,
13600 cols#80, it#8, lines#24,
13601 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
13602 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
13603 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
13604 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
13605 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
13606 el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
13607 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
13608 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
13609 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
13610 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
13611 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
13612 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
13613 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
13614 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
13615 cols#132, lines#24,
13616 bel=^G, cr=\r, cud1=\n, ind=\n,
13617 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
13618 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
13619 ampex232|ampex-232|Ampex Model 232,
13621 cols#80, lines#24, xmc#1,
13622 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
13623 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13624 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
13625 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
13626 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
13627 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
13628 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
13629 kf9=^AI\r, khome=^^, use=adm+sgr,
13630 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
13631 ampex232w|Ampex Model 232 / 132 columns,
13632 cols#132, lines#24,
13633 is2=\E\034Eg\El, use=ampex232,
13635 #### Ann Arbor (aa)
13637 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
13638 # numbers of function keys. At least some used monitors in portrait mode,
13639 # allowing up to 76-character screen heights! They were reachable at:
13641 # Ann Arbor Terminals
13642 # 6175 Jackson Road
13643 # Ann Arbor, MI 48103
13646 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
13647 # can't be found on the Web; I fear they're long dead. R.I.P.
13651 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
13652 # Highly modified 6/22 by Mike O'Brien.
13653 # split out into several for the various screen sizes by dave-yost@rand
13654 # Modifications made 3/82 by Mark Horton
13655 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
13656 # status line moved to top of screen, <flash> removed 5/82
13657 # Some unknown person at SCO then hacked the init strings to make them more
13660 # assumes the following setup:
13661 # A menu: 0000 1010 0001 0000
13662 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13663 # C menu: 56 66 0 0 9600 0110 1100
13664 # D menu: 0110 1001 1 0
13666 # Briefly, the settings are for the following modes:
13667 # (values are for bit set/clear with * indicating our preference
13668 # and the value used to test these termcaps)
13669 # Note that many of these settings are irrelevant to the terminfo
13670 # and are just set to the default mode of the terminal as shipped
13673 # A menu: 0000 1010 0001 0000
13674 # Block/underline cursor*
13675 # blinking/nonblinking cursor*
13676 # key click/no key click*
13677 # bell/no bell at column 72*
13679 # key pad is cursor control*/key pad is numeric
13680 # return and line feed/return for <cr> key *
13681 # repeat after .5 sec*/no repeat
13682 # repeat at 25/15 chars per sec. *
13684 # hold data until pause pressed/process data unless pause pressed*
13685 # slow scroll/no slow scroll*
13686 # Hold in area/don't hold in area*
13687 # functions keys have default*/function keys disabled on powerup
13689 # show/don't show position of cursor during page transmit*
13694 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13695 # Baud rate (9600*)
13697 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
13698 # 1 stop bit*/2 stop bits
13699 # parity error detection off*/on
13701 # keyboard local/on line*
13702 # half/full duplex*
13703 # disable/do not disable keyboard after data transmission*
13705 # transmit entire page/stop transmission at cursor*
13706 # transfer/do not transfer protected characters*
13707 # transmit all characters/transmit only selected characters*
13708 # transmit all selected areas/transmit only 1 selected area*
13710 # transmit/do not transmit line separators to host*
13711 # transmit/do not transmit page tab stops tabs to host*
13712 # transmit/do not transmit column tab stop tabs to host*
13713 # transmit/do not transmit graphics control (underline,inverse..)*
13715 # enable*/disable auto XON/XOFF control
13716 # require/do not require receipt of a DC1 from host after each LF*
13717 # pause key acts as a meta key/pause key is pause*
13725 # XON character (17*)
13726 # XOFF character (19*)
13728 # C menu: 56 66 0 0 9600 0110 1100
13729 # number of lines to print data on (printer) (56*)
13731 # number of lines on a sheet of paper (printer) (66*)
13733 # left margin (printer) (0*)
13735 # number of pad chars on new line to printer (0*)
13737 # printer baud rate (9600*)
13739 # printer parity: 00=odd,01=even*,10=space,11=mark
13740 # printer stop bits: 2*/1
13741 # print/do not print guarded areas*
13743 # new line is: 01=LF,10=CR,11=CRLF*
13747 # D menu: 0110 1001 1 0
13748 # LF is newline/LF is down one line, same column*
13749 # wrap to preceding line if move left from col 1*/don't wrap
13750 # wrap to next line if move right from col 80*/don't wrap
13751 # backspace is/is not destructive*
13753 # display*/ignore DEL character
13754 # display will not/will scroll*
13755 # page/column tab stops*
13756 # erase everything*/erase unprotected only
13758 # editing extent: 0=display,1=line*,2=field,3=area
13763 annarbor4080|aa4080|ann arbor 4080,
13766 bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
13767 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
13768 %{12}%+%;%{64}%+%c,
13769 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
13770 kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
13772 # Strange Ann Arbor terminal from BRL
13773 aas1901|Ann Arbor K4080 w/S1901 mod,
13776 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
13777 home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
13780 # If you're using the GNU termcap library, add
13781 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
13782 # to these capabilities. This is the nonstandard GNU termcap scrolling
13783 # capability, arguments are:
13784 # 1. Total number of lines on the screen.
13785 # 2. Number of lines above desired scroll region.
13786 # 3. Number of lines below (outside of) desired scroll region.
13787 # 4. Total number of lines on the screen, the same as the first parameter.
13788 # The generic Ann Arbor entry is the only one that uses this.
13789 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
13790 OTbs, am, km, mc5i, mir, xon,
13792 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13793 clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H,
13794 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
13795 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13796 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
13797 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
13798 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
13799 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
13800 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
13801 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13802 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
13803 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
13804 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
13805 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
13806 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
13807 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
13808 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
13809 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
13810 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
13812 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
13813 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
13816 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
13818 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13819 vpa=\E[%p1%{1}%+%dd,
13821 aaa+rv|ann arbor ambassador in reverse video,
13822 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
13823 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
13824 rs1=\E[H\E[7m\E[J$<156>,
13825 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;
13826 %;%?%p7%t8;%;m\016,
13827 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
13828 # Ambassador with the DEC option, for partial vt100 compatibility.
13829 aaa+dec|ann arbor ambassador in dec vt100 mode,
13830 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
13831 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
13832 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
13833 %p7%t8;%;m%?%p9%t\017%e\016%;,
13835 aaa-18|ann arbor ambassador/18 lines,
13837 is2=\E7\E[60;0;0;18p\E8,
13838 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
13840 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
13841 use=aaa+rv, use=aaa-18,
13842 aaa-20|ann arbor ambassador/20 lines,
13844 is2=\E7\E[60;0;0;20p\E8,
13845 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
13847 aaa-22|ann arbor ambassador/22 lines,
13849 is2=\E7\E[60;0;0;22p\E8,
13850 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
13852 aaa-24|ann arbor ambassador/24 lines,
13854 is2=\E7\E[60;0;0;24p\E8,
13855 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
13857 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
13858 use=aaa+rv, use=aaa-24,
13859 aaa-26|ann arbor ambassador/26 lines,
13861 is2=\E7\E[60;0;0;26p\E8,
13862 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
13863 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
13864 aaa-28|ann arbor ambassador/28 lines,
13866 is2=\E7\E[60;0;0;28p\E8,
13867 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
13868 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
13869 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
13872 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
13873 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
13874 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
13875 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
13876 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
13877 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
13878 use=aaa+rv, use=aaa-30-s,
13879 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
13880 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
13881 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
13882 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
13883 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
13884 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
13885 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
13887 is2=\E7\E[60;0;0;30p\E8,
13888 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
13889 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
13890 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
13891 use=aaa+rv, use=aaa-30,
13892 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
13893 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
13895 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
13896 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
13897 use=aaa+rv, use=aaa-30,
13898 aaa-36|ann arbor ambassador/36 lines,
13900 is2=\E7\E[60;0;0;36p\E8,
13901 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
13902 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
13903 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
13904 use=aaa+rv, use=aaa-36,
13905 aaa-40|ann arbor ambassador/40 lines,
13907 is2=\E7\E[60;0;0;40p\E8,
13908 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
13909 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
13910 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
13911 use=aaa+rv, use=aaa-40,
13912 aaa-48|ann arbor ambassador/48 lines,
13914 is2=\E7\E[60;0;0;48p\E8,
13915 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
13916 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
13917 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
13918 use=aaa+rv, use=aaa-48,
13919 aaa-60-s|ann arbor ambassador/59 lines+status,
13922 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
13923 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
13924 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
13925 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
13926 use=aaa+rv, use=aaa-60-s,
13927 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
13928 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
13929 aaa-60|ann arbor ambassador/60 lines,
13931 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
13933 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
13934 use=aaa+rv, use=aaa-60,
13935 aaa-db|ann arbor ambassador 30/destructive backspace,
13937 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
13939 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
13941 flash=\E[>59h$<100>\E[>59l,
13942 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
13943 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
13944 guru+rv|guru changes for reverse video,
13945 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
13946 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
13947 use=guru+rv, use=guru-33,
13948 guru+s|guru status line,
13950 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
13951 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
13952 tsl=\E[>51h\E[1;%p1%dH\E[2K,
13953 guru-nctxt|guru with no saved context,
13954 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
13955 guru-s|guru-33-s|ann arbor guru/33 lines+status,
13957 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
13958 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13959 guru-24|ann arbor guru 24 lines,
13961 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
13963 guru-44|ann arbor guru 44 lines,
13965 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
13967 guru-44-s|ann arbor guru/44 lines+status,
13969 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
13970 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13971 guru-76|guru with 76 lines by 89 cols,
13973 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
13975 guru-76-s|ann arbor guru/76 lines+status,
13977 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
13978 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13979 guru-76-lp|guru-lp|guru with page bigger than line printer,
13980 cols#134, lines#76,
13981 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
13983 guru-76-w|guru 76 lines by 178 cols,
13984 cols#178, lines#76,
13985 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
13987 guru-76-w-s|ann arbor guru/76 lines+status+wide,
13988 cols#178, lines#75,
13989 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
13990 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13991 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
13992 cols#178, lines#76,
13993 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
13995 aaa-rv-unk|ann arbor unknown type,
13996 lh#0, lw#0, nlab#0,
13997 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
13998 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
14000 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
14002 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
14004 #### Applied Digital Data Systems (adds)
14006 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
14007 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
14008 # terminals was merged again. Then AT&T sold the terminal business to
14009 # SunRiver, which later changed its name to Boundless Technologies. The
14010 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
14011 # as of early 1995) are at:
14013 # Boundless Technologies
14014 # 100 Marcus Boulevard
14015 # Hauppauge, NY 11788-3762
14016 # Vox: (800)-231-5445
14017 # Fax: (516)-342-7378
14018 # Web: http://boundless.com
14020 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
14021 # In 1995 Boundless acquired DEC's terminals business.
14024 # Regent: lowest common denominator, works on all regents.
14025 # (regent: renamed ":bc:" to ":le:" -- esr)
14026 regent|Adds Regent Series,
14029 bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z,
14030 home=\EY\s\s, ind=\n, ll=^A,
14031 # Regent 100 has a bug where if computer sends escape when user is holding
14032 # down shift key it gets confused, so we avoid escape.
14033 regent100|Adds Regent 100,
14036 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
14037 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
14038 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
14039 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
14040 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
14041 regent20|Adds Regent 20,
14042 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
14044 regent25|Adds Regent 25,
14045 bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A,
14047 regent40|Adds Regent 40,
14049 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
14050 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
14051 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
14052 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
14053 smul=\E0`, use=regent25,
14054 regent40+|Adds Regent 40+,
14055 is2=\EB, use=regent40,
14056 regent60|regent200|Adds Regent 60,
14057 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
14058 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
14060 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
14061 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
14062 viewpoint|addsviewpoint|adds viewpoint,
14065 bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
14066 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
14067 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
14068 ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
14069 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
14070 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
14071 # Some viewpoints have bad ROMs that foo up on ^O
14072 screwpoint|adds viewpoint with ^O bug,
14073 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
14075 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
14076 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
14077 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
14078 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
14079 # invis=01000100 and %c is the logical or of desired attributes.
14080 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
14082 # Update by TD - 2004:
14084 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
14086 # COMMANDS ASCII CODE
14088 # Address, Absolute ESC,=,row,column
14090 # Aux Port Enable ESC,@
14091 # Aux Port Disable ESC,A
14095 # Cursor forward FF
14098 # Cursor suppress ETB
14099 # Cursor enable CAN
14100 # Erase to end of line ESC,T
14101 # Erase to end of page ESC,Y
14104 # Keyboard unlock SO
14105 # Read current cursor position ESC,?
14106 # Set Attribute ESC,0,x (see below for values of x)
14107 # Tag bit reset ESC,(
14108 # Tag bit set ESC,)
14109 # Transparent Print on ESC,3
14110 # Transparent Print off ESC,4
14116 # Half Intensity A 0101
14118 # Half Intensity Blinking C 0103
14119 # Reverse Video P 0120
14120 # Reverse Video Half Intensity Q 0121
14121 # Reverse Video Blinking R 0122
14122 # Reverse Video Half Intensity
14124 # Underlined ` 0140
14125 # Underlined Half Intensity a 0141
14126 # Underlined Blinking b 0142
14127 # Underlined Half Intensity
14129 # Video suppress D 0104
14130 vp3a+|viewpoint3a+|adds viewpoint 3a+,
14132 cols#80, it#8, lines#24,
14133 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
14134 cub1=^H, cud1=\n, cuf1=^L,
14135 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
14136 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E),
14137 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
14138 nel=\r\n, rev=\E0P\E), rmso=\E(,
14139 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
14140 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
14141 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
14142 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
14143 vp60|viewpoint60|addsvp60|adds viewpoint60,
14146 # adds viewpoint 90 - from cornell
14147 # Note: emacs sends ei occasionally to insure the terminal is out of
14148 # insert mode. This unfortunately puts the viewpoint90 IN insert
14149 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
14150 # - :ei=:im=: must be present in the termcap translation.)
14151 # - <xhp> indicates glitch that attributes stick to location
14152 # - <msgr> means it's safe to move in standout mode
14153 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
14155 # Function key and label capabilities merged in from SCO.
14156 vp90|viewpoint90|adds viewpoint 90,
14157 OTbs, bw, msgr, xhp,
14159 clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
14160 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
14161 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
14162 ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n,
14163 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
14164 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
14165 kf7=^B8\r, kf8=^B9\r, kf9=\002\:\r, khome=^A, lf0=F1, lf1=F2,
14166 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
14167 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
14168 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
14169 # Note: if return acts weird on a980, check internal switch #2
14170 # on the top chip on the CONTROL pc board.
14171 adds980|a980|adds consul 980,
14174 bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
14175 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
14176 dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1,
14177 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
14178 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
14180 #### C. Itoh Electronics
14182 # As of 1995 these people no longer make terminals (they're still in the
14183 # printer business). Their terminals were all clones of the DEC VT series.
14184 # They're located in Orange County, CA.
14187 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
14188 # the delay times and do an auto tab set rather than the indirect
14189 # file used in vt100.
14190 cit80|cit-80|citoh 80,
14193 clear=\E[H\EJ, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
14194 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
14195 ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
14196 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
14197 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
14198 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
14199 cit101|citc|C.itoh fast vt100,
14202 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
14203 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
14204 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
14205 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
14206 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
14207 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14208 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
14209 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
14211 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
14212 # The following termcap entry was created from the Callan cd100 entry. The
14213 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
14214 # full selection of combinations of reverse video, underline, and blink.
14215 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
14216 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
14217 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
14218 cit101e|C. Itoh CIT-101e,
14219 OTbs, OTpt, am, mir, msgr,
14220 cols#80, it#8, lines#24,
14221 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
14222 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
14223 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
14224 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
14225 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
14226 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
14227 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
14228 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
14229 smkx=\E=, smso=\E[7m, smul=\E[4m,
14230 # From: David S. Lawyer, June 1997:
14231 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
14232 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
14233 # late 1980's CIT Terminals went out of business.
14234 # There is no need to use the initialization string is=... (by invoking
14235 # tset or setterm etc.) provided that the terminal has been manually set
14236 # up (and the setup saved with ^S) to be compatible with this termcap. To be
14237 # compatible it should be in ANSI mode (not VT52). A set-up that
14238 # works is to set all the manually settable stuff to factory defaults
14239 # by pressing ^D in set-up mode. Then increase the brightness with the
14240 # up-arrow key since the factory default will likely be dim on an old
14241 # terminal. Then change any options you want (provided that they are
14242 # compatible with the termcap). For my terminal I set: Screen
14243 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
14244 # on. I also set up mine for parity (but you may not need it). Then
14245 # save the setup with ^S.
14246 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
14247 cit101e-rv|Citoh CIT-101e (sets reverse video),
14248 am, eo, mir, msgr, xenl, xon,
14249 cols#80, it#8, lines#24,
14250 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14251 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=\r,
14252 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14253 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14254 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14255 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14256 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
14257 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
14258 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
14259 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
14260 B\E[m\E[20l\E[1;24r\E[24;1H,
14261 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14262 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
14263 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
14264 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
14265 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
14266 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
14267 u7=\E[6n, u8=\E[?6c, u9=\E[c,
14268 cit101e-n|CIT-101e w/o am,
14270 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
14272 cit101e-132|CIT-101e with 132 cols,
14274 kbs=^H, kcub1=^H, kcud1=\n, use=cit101e,
14275 cit101e-n132|CIT-101e with 132 cols w/o am,
14278 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
14280 # CIE Terminals CIT-500 from BRL
14281 # The following SET-UP modes are assumed for normal operation:
14282 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
14283 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
14284 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
14285 # Other SET-UP modes may be set for operator convenience or communication
14287 # Hardware tabs are assumed to be set every 8 columns; they can be set up
14288 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
14289 # "stty ixon -ixany" to enable DC3/DC1 flow control!
14290 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
14291 cit500|CIE Terminals CIT-500,
14292 OTbs, OTpt, mir, msgr, xon,
14293 OTkn#10, cols#80, it#8, lines#64, vt#3,
14294 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14295 clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
14296 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
14297 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14298 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14299 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
14300 il1=\E[L, ind=\n, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
14301 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
14302 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
14303 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
14304 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
14305 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
14306 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
14307 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
14308 rmso=\E[m, rmul=\E[m,
14309 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
14310 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
14311 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14313 # C. Itoh printers begin here
14314 citoh|ci8510|8510|c.itoh 8510a,
14317 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
14318 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
14320 citoh-pica|citoh in pica,
14321 is1=\EN, use=citoh,
14322 citoh-elite|citoh in elite,
14325 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
14328 citoh-comp|citoh in compressed,
14331 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
14332 \,097\,105\,113\,121\,129.,
14334 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
14335 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
14337 is1=\EP, use=citoh,
14338 citoh-6lpi|citoh in 6 lines per inch mode,
14339 is3=\EA, use=citoh,
14340 citoh-8lpi|citoh in 8 lines per inch mode,
14342 is3=\EB, use=citoh,
14344 #### Control Data (cdc)
14347 cdc456|cdc 456 terminal,
14350 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
14351 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
14352 el=^V, home=^Y, il1=\EL, ind=\n,
14354 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
14358 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
14359 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
14360 kcuu1=^W, khome=^Y,
14361 cdc721ll|CDC Viking with long lines,
14363 cols#132, lines#24,
14364 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
14365 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
14366 kcuu1=^W, khome=^Y,
14367 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
14371 bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
14372 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
14373 home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017,
14375 # The following switch/key settings are assumed for normal operation:
14376 # 96 chars SCROLL FULL duplex not BLOCK
14377 # Other switches may be set according to communication requirements.
14378 # Insert/delete-character cannot be used, as the whole display is affected.
14379 # "so" & "se" are commented out until jove handles "sg" correctly.
14382 OTkn#10, cols#80, lines#24,
14383 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
14384 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
14385 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n,
14386 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
14387 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
14388 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
14389 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
14390 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
14393 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
14395 # Part of the long initialization string defines the "DOWN" key to the left
14396 # of the tab key to send an ESC. The real ESC key is positioned way out
14399 # The termcap won't work in 132 column mode due to the way it it moves the
14400 # cursor. Termcap doesn't have the capability (as far as I could tell) to
14401 # handle the 721 in 132 column mode.
14403 # (cdc721: changed :ri: to :sr: -- esr)
14404 cdc721-esc|Control Data 721,
14405 OTbs, OTpt, am, bw, msgr, xon,
14406 OTkn#10, cols#80, it#8, lines#30,
14407 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
14408 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
14409 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
14410 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
14411 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
14412 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
14413 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
14415 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
14416 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
14417 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
14418 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
14419 sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\,
14424 # Getronics is a Dutch electronics company that at one time was called
14425 # `Geveke' and made async terminals; but (according to the company itself!)
14426 # they've lost all their documentation on the command set. The hardware
14427 # documentation suggests the terminals were actually manufactured by a
14428 # Taiwanese electronics company named Cal-Comp. There are known
14429 # to have been at least two models, the 33 and the 50.
14432 # The 50 seems to be a top end vt220 clone, with the addition of a higher
14433 # screen resolution, a larger screen, at least 1 page of memory above and
14434 # below the screen, apparently pages of memory right and left of the screen
14435 # which can be panned, and about 75 function keys (15 function keys x normal,
14436 # shift, control, func A, func B). It also has more setup possibilities than
14437 # the vt220. The monitor case is dated November 1978 and the keyboard case is
14440 # The vt100 emulation works as is. The entry below describes the rather
14441 # non-conformant (but more featureful) ANSI mode.
14443 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
14444 visa50|geveke visa 50 terminal in ansi 80 character mode,
14447 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
14448 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
14449 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14450 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14451 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14452 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
14453 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
14454 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
14455 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
14456 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
14457 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
14458 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
14459 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
14460 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
14461 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
14462 lf3=A insert line, lf4=A delete line, lf5=A clear,
14463 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
14464 lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l,
14465 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
14466 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
14467 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
14470 #### Human Designed Systems (Concept)
14472 # Human Designed Systems
14474 # King of Prussia, PA 19406
14475 # Vox: (610)-277-8300
14476 # Fax: (610)-275-5739
14477 # Net: support@hds.com
14479 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
14480 # the character-terminal business now (1995) and making X terminals. In
14481 # particular, the whole `Concept' line described here was discontinued long
14485 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
14486 # Extensive changes to c108 by arpavax:eric Feb 1982
14487 # Some unknown person at SCO then translated it to terminfo.
14489 # There seem to be a number of different versions of the C108 PROMS
14490 # (with bug fixes in its Z-80 program).
14492 # The first one that we had would lock out the keyboard of you
14493 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
14494 # Try that on your C108 and see if it sends a ^S when you type it.
14495 # If so, you have an old version of the PROMs.
14497 # You should configure the C108 to send ^S/^Q before running this.
14498 # It is much faster (at 9600 baud) than the c100 because the delays
14500 # new status line display entries for c108-8p:
14501 # <is3> - init str #3 - setup term for status display -
14502 # set programmer mode, select window 2, define window at last
14503 # line of memory, set bkgnd stat mesg there, select window 0.
14505 # <tsl> - to status line - select window 2, home cursor, erase to
14506 # end-of-window, 1/2 bright on, goto(line#0, col#?)
14508 # <fsl> - from status line - 1/2 bright off, select window 0
14510 # <dsl> - disable status display - set bkgnd status mesg with
14513 # There are probably more function keys that should be added but
14514 # I don't know what they are.
14516 # No delays needed on c108 because of ^S/^Q handshaking
14518 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
14519 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
14521 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
14522 c108-4p|concept108-4p|concept 108 w/4 pages,
14523 OTbs, eslok, hs, xon,
14525 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
14526 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
14527 %>%t\001%{96}%-%;%{32}%+%c,
14528 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
14529 ind=\n, is1=\EK\E!\E F,
14530 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
14531 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
14532 smcup=\EU\Ev 8p\Ep\r\E\025,
14533 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
14534 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
14535 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
14537 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
14538 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
14540 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
14542 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
14543 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
14546 # These have only window relative cursor addressing, not screen
14547 # relative. To get it to work right here, smcup/rmcup (which
14548 # were invented for the concept) lock you into a one page
14549 # window for screen style programs.
14551 # To get out of the one page window, we use a clever trick:
14552 # we set the window size to zero ("\Ev " in rmcup) which the
14553 # terminal recognizes as an error and resets the window to all
14556 # This trick works on c100 but does not on c108, sigh.
14558 # Some tty drivers use cr3 for concept, others use nl3, hence
14559 # the delays on cr and ind below. This padding is only needed at
14560 # 9600 baud and up. One or the other is commented out depending on
14561 # local conventions.
14563 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
14564 # less than 6 but more than 2 will work.
14566 # Note: can't use function keys f7-f10 because they are
14567 # indistinguishable from arrow keys (!), also, del char and
14568 # clear eol use xon/xoff so they probably won't work very well.
14570 # Also note that we don't define insrt/del char/delline/eop/send
14571 # because they don't transmit unless we reset them - I figured
14572 # it was a bad idea to clobber their definitions.
14574 # The <mc5> sequence changes the escape character to ^^ so that
14575 # escapes will be passed through to the printer. Only trouble
14576 # is that ^^ won't be - ^^ was chosen to be unlikely.
14577 # Unfortunately, if you're sending raster bits through to be
14578 # plotted, any character you choose will be likely, so we lose.
14580 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
14581 # cannot be # in is2 because it will hang a c100 with no printer
14583 c100|concept100|concept|c104|c100-4p|hds concept 100,
14584 OTbs, am, eo, mir, ul, xenl,
14585 cols#80, lines#24, pb#9600, vt#8,
14586 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
14587 cub1=^H, cud1=\n, cuf1=\E=,
14588 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
14589 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
14590 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
14591 ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>,
14593 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
14594 \010A@\s\E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
14595 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
14596 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
14597 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
14598 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
14599 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
14600 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
14601 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
14602 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
14603 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
14604 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
14605 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
14606 smso=\ED, smul=\EG,
14607 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
14608 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
14609 smso=\EE, use=c100,
14610 oc100|oconcept|c100-1p|old 1 page concept 100,
14614 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
14615 # Lots of notes, originally inline, but ncurses doesn't grok that.
14617 # am: not available in power on mode, but turned on with \E[=107;207h in
14618 # is2=. Also, \E=124l in is2= could have been used to prevent needing
14619 # to specify xenl:, but that would have rendered the last space on the
14620 # last line useless.
14621 # bw: Not available in power on mode, but turned on with \E[=107;207h in
14623 # clear: Could be done with \E[2J alone, except that vi (and probably most
14624 # other programs) assume that this also homes the cursor.
14625 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
14626 # scroll the window, and go back to window 1.
14627 # is2: the string may cause a warning to be issued by tic that it
14628 # found a very long line and that it suspects that a comma is missing
14629 # somewhere. This warning can be ignored (unless it comes up more than
14630 # once). The initialization string contains the following commands:
14632 # [Setup mode items changed from factory defaults:]
14633 # \E)0 set alternate character set to
14635 # ^O set character set to default
14636 # [In case it wasn't]
14637 # \E[m turn off all attributes
14638 # [In case they weren't off]
14639 # \E[=107; cursor wrap and
14640 # 207h character wrap on
14641 # \E[90;3u set Fkey definitions to "transmit"
14643 # \E[92;3u set cursor key definitions to
14644 # "transmit" defaults
14645 # \E[43;1u set shift F13 to transmit...
14647 # \E[44;1u set shift F14 to transmit...
14649 # \E[45;1u set shift F15 to transmit...
14651 # \E[46;1u set shift F16 to transmit...
14653 # \E[200;1u set shift up to transmit...
14655 # \E[201;1u set shift down to transmit...
14657 # \E[202;1u set shift right to transmit...
14659 # \E[203;1u set shift left to transmit...
14661 # \E[204;1u set shift home to transmit...
14663 # \E[212;1u set backtab to transmit...
14665 # \E[213;1u set shift backspace to transmit...
14667 # \E[214;1u set shift del to transmit...
14669 # [Necessary items not mentioned in setup mode:]
14670 # \E[2!w move to window 2
14671 # \E[25;25w define window as line 25 of memory
14672 # \E[!w move to window 1
14673 # \E[2*w show current line of window 2 as
14675 # \E[2+x set meta key to use high bit
14676 # \E[;3+} move underline to bottom of character
14678 # All Fkeys are set to their default transmit definitions with \E[90;3u
14679 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
14680 # setting MUST be redefined or deactivated, because the default is
14681 # contained in almost all of this terminal's Fkey strings! If for some
14682 # reason "quit" cannot be altered, the Fkeys can, but it would be
14683 # necessary to change ^| to ^] in all of these definitions, and add
14684 # \E[2;029!t to is2.
14685 # lines: is set to 24 because this terminal refuses to treat the 25th
14687 # ll: Not available in power on mode, but turned on with \E[=107;207h in
14689 # lm: Pointless, given that this definition locks a single screen of
14690 # memory into view, but what the hey...
14691 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
14692 # other attributes alone), but some programs expect this to turn off
14694 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
14695 # attributes alone), but some programs expect this to turn off
14697 # sgr: Attributes are set on this terminal with the string \E[ followed by
14698 # a list of attribute code numbers (in decimal, separated by
14699 # semicolons), followed by the character m. The attribute code
14702 # 2 for dim (which is ignored in power on mode);
14706 # 8 for not displayable; and
14707 # =99 for protected (except that there are strange side
14708 # effects to protected characters which make them inadvisable).
14709 # The mapping of terminfo parameters to attributes is as follows:
14710 # %p1 (standout) = bold and inverse together;
14711 # %p2 (underline) = underline;
14712 # %p3 (reverse) = inverse;
14713 # %p4 (blink) = blinking;
14714 # %p5 (dim) is ignored;
14715 # %p6 (bold) = bold;
14716 # %p7 (invisible) = not displayable;
14717 # %p8 (protected) is ignored; and
14718 # %p9 (alt char set) = alt char set.
14719 # The code to do this is:
14721 # %?%p1%p6%O IF (standout; bold) OR
14722 # %t;1 THEN OUTPUT ;1
14724 # %?%p2 IF underline
14725 # %t;4 THEN OUTPUT ;4
14728 # %t;5 THEN OUTPUT ;5
14730 # %?%p1%p3%O IF (standout; reverse) OR
14731 # %t;7 THEN OUTPUT ;7
14733 # %?%p7 IF invisible
14734 # %t;8 THEN OUTPUT ;8
14737 # %?%p9 IF altcharset
14738 # %t^N THEN OUTPUT ^N
14739 # %e^O ELSE OUTPUT ^O
14741 # sgr0: Everything is turned off (including alternate character set), since
14742 # there is no way of knowing what it is that the program wants turned
14744 # smul: The "underline" attribute is reconfigurable to an overline or
14745 # strike-through, or (as done with \E[;3+} in is2=), to a line at the true
14746 # bottom of the character cell. This was done to allow for more readable
14747 # underlined characters, and to be able to distinguish between an
14748 # underlined space, an underscore, and an underlined underscore.
14749 # xenl: Terminal can be configured to not need this, but this "glitch"
14750 # behavior is actually preferable with autowrap terminals.
14752 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
14753 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
14754 # string modifies the 'O' in kf43 to kf46 to a '$'.
14756 # kcbt was originally ^I but redefined in is2=.
14757 # kHOM was \E[H originally but redefined in is2=, as were a number of
14759 # kDC was originally \177 but redefined in is2=.
14761 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
14762 # tsl: Go to window 2, then do an hpa=.
14764 #------- flash=\E[8;3!}^G\E[3;3!}
14765 #------- flash=\E[?5h$<100>\E[?5l
14766 # There are two ways to flash the screen, both of which have their drawbacks.
14767 # The first is to set the bell mode to video, transmit a bell character, and
14768 # set the bell mode back - but to what? There is no way of knowing what the
14769 # user's old bell setting was before we messed with it. Worse, the command to
14770 # set the bell mode also sets the key click volume, and there is no way to say
14771 # "leave that alone", or to know what it's set to, either.
14772 # The second way to do a flash is to set the screen to inverse video, pad for a
14773 # tenth of a second, and set it back - but like before, there's no way to know
14774 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
14775 # it that way. The point is moot anyway, since vi (and probably other
14776 # programs) assume that by defining flash=, you want the computer to use it
14777 # INSTEAD of bel=, rather than as a secondary type of signal.
14779 #------- cvvis=\E[+{
14780 # The is the power on setting, which is also as visible as the cursor
14782 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
14783 # Windowing is possible, but not defined here because it is also used to
14784 # emulate status line functions. Allowing a program to set a window could
14785 # clobber the status line or render it unusable. There is additional memory,
14786 # but screen scroll functions are destructive and do not make use of it.
14788 #------- dim= Not available in power on mode.
14789 # You have a choice of defining low intensity characters as "half bright" and
14790 # high intensity as "normal", or defining low as "normal" and high as "bold".
14791 # No matter which you choose, only one of either "half bright" or "bold" is
14792 # available at any time, so taking the time to override the default is
14795 #------- prot=\E[=0;99m
14796 # Not defined, because it appears to have some strange side effects.
14797 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14798 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14799 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
14800 # Available, but making them available to programs is inadvisable.
14801 # The code to do this is:
14802 # %?%p1%{24}%< IF ((key; 24) <;
14803 # %p1%{30}%> ((key; 30) >;
14804 # %p1%{54}%< (key; 54) <
14807 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
14808 # %t\E[ THEN OUTPUT \E[
14809 # %p1%d OUTPUT (key) as decimal
14810 # [next line applies to pfx only]
14814 # %p2%s OUTPUT (string) as string
14816 # [DEL chosen as delimiter, but could be any character]
14817 # [implied: ELSE do nothing]
14821 # Not defined since anything it might do could be done faster and easier with
14822 # either Meta-Shift-Reset or the main power switch.
14824 #------- smkx=\E[1!z
14825 #------- rmkx=\E[!z
14826 # These sequences apply to the cursor and setup keys only, not to the
14827 # numeric keypad. But it doesn't matter anyway, since making these
14828 # available to programs is inadvisable.
14829 # For the key definitions below, all sequences beginning with \E$ are
14830 # custom and programmed into the terminal via is2. \E$ also has no
14831 # meaning to any other terminal.
14833 #------- cmdch=\E[;%p1%d!t
14834 # Available, but making it available to programs is inadvisable.
14835 #------- smxon=\E[1*q
14836 # Available, but making it available to programs is inadvisable.
14837 # Terminal will send XON/XOFF on buffer overflow.
14838 #------- rmxon=\E[*q
14839 # Available, but making it available to programs is inadvisable.
14840 # Terminal will not notify on buffer overflow.
14841 #------- smm=\E[2+x
14843 # Available, but making them available to programs is inadvisable.
14846 # It's not made clear in the manuals, but based on other ansi/vt type
14847 # terminals, it's a good guess that this terminal is capable of both
14848 # "transparent print" (which doesn't copy data to the screen, and
14849 # therefore needs mc5i: specified to say so) and "auxiliary print"
14850 # (which does duplicate printed data on the screen, in which case mc4=
14851 # and mc5= should use the \E[?4i and \E[?5i strings instead).
14853 hds200|Human Designed Systems HDS200,
14854 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
14855 cols#80, it#8, lines#24, lm#0,
14856 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14857 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
14858 clear=\E[H\E[J, cnorm=\E[+{, cr=\r,
14859 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14860 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14861 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14862 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14863 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
14864 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
14865 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14867 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
14868 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
14869 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
14870 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
14871 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
14872 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
14873 kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
14874 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14875 kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r,
14876 kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS,
14877 kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r,
14878 kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r,
14879 kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r,
14880 kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r,
14881 kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r,
14882 kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q,
14883 kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r,
14884 kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r,
14885 kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r,
14886 kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U,
14887 kpp=\E[V, kri=\E[S, ll=\E[H\E[A, nel=\E[E, rc=\E8,
14888 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
14889 rmul=\E[m\017, sc=\E7,
14890 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
14891 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14892 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
14893 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
14894 vpa=\E[%i%p1%dd, use=ansi+pp,
14896 # <ht> through <el> included to specify padding needed in raw mode.
14897 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
14898 avt-ns|concept avt no status line,
14899 OTbs, am, eo, mir, ul, xenl, xon,
14900 cols#80, it#8, lines#24, lm#192,
14901 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14902 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
14903 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14904 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
14905 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14906 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
14907 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
14908 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
14909 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
14910 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
14911 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
14912 \E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;
14914 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14915 kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
14916 kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r,
14917 ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
14918 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
14919 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
14920 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
14921 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
14923 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
14924 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
14926 sgr0=\E[m\016$<1>, smacs=\017$<1>,
14927 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
14928 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14929 vpa=\E[%p1%{1}%+%dd,
14930 avt-rv-ns|concept avt in reverse video mode/no status line,
14931 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
14933 avt-w-ns|concept avt in 132 column mode/no status line,
14934 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
14936 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
14937 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
14938 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
14940 # Concept AVT with status line. We get the status line using the
14941 # "Background status line" feature of the terminal. We swipe the
14942 # first line of memory in window 2 for the status line, keeping
14943 # 191 lines of memory and 24 screen lines for regular use.
14944 # The first line is used instead of the last so that this works
14945 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
14946 # assumes an 8 page AVT but lm isn't currently used anywhere.)
14948 avt+s|concept avt status line changes,
14951 dsl=\E[0*w, fsl=\E[1;1!w,
14952 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
14953 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
14954 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
14955 avt|avt-s|concept-avt|avt w/80 columns,
14956 use=avt+s, use=avt-ns,
14957 avt-rv|avt-rv-s|avt reverse video w/sl,
14958 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
14959 use=avt+s, use=avt-ns,
14960 avt-w|avt-w-s|concept avt 132 cols+status,
14961 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
14962 use=avt+s, use=avt-ns,
14963 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
14964 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
14965 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
14967 #### Contel Business Systems.
14970 # Contel c300 and c320 terminals.
14971 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
14973 cols#80, lines#24, xmc#1,
14974 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
14975 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
14976 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
14977 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
14978 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
14979 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
14980 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
14981 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
14982 # Contel c301 and c321 terminals.
14983 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
14984 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
14987 #### Data General (dg)
14989 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
14990 # the terminals group at Data General was shut down in 1991; all these
14991 # terminals have thus been discontinued.
14993 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
14994 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
14995 # sequentially, first the unmodified key codes are listed as F1 through F15.
14996 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
14997 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
14998 # F46 through F60. This is done in the private "includes" below whose names
14999 # start with "dgkeys+".
15001 # DG terminals generally support 8 bit characters. For each of these terminals
15002 # two descriptions are supplied:
15003 # 1) A default description for 8 bits/character communications, which
15004 # uses the default DG international character set and keyboard codes.
15005 # 2) A description with suffix "-7b" for 7 bits/character communications.
15006 # This description must use the NON-DEFAULT native keyboard language.
15008 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
15009 # Ctrl/Shift fdkeys (kf34-kf44).
15011 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
15012 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
15013 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
15014 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
15015 kf11=\233011z, kf12=\233012z, kf13=\233013z,
15016 kf14=\233014z, kf15=\233000z, kf16=\233101z,
15017 kf17=\233102z, kf18=\233103z, kf19=\233104z,
15018 kf2=\233002z, kf20=\233105z, kf21=\233106z,
15019 kf22=\233107z, kf23=\233108z, kf24=\233109z,
15020 kf25=\233110z, kf26=\233111z, kf27=\233112z,
15021 kf28=\233113z, kf29=\233114z, kf3=\233003z,
15022 kf30=\233100z, kf31=\233201z, kf32=\233202z,
15023 kf33=\233203z, kf34=\233204z, kf35=\233205z,
15024 kf36=\233206z, kf37=\233207z, kf38=\233208z,
15025 kf39=\233209z, kf4=\233004z, kf40=\233210z,
15026 kf41=\233211z, kf42=\233212z, kf43=\233213z,
15027 kf44=\233214z, kf45=\233200z, kf46=\233301z,
15028 kf47=\233302z, kf48=\233303z, kf49=\233304z,
15029 kf5=\233005z, kf50=\233305z, kf51=\233306z,
15030 kf52=\233307z, kf53=\233308z, kf54=\233309z,
15031 kf55=\233310z, kf56=\233311z, kf57=\233312z,
15032 kf58=\233313z, kf59=\233314z, kf6=\233006z,
15033 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
15034 khome=\233H, kprt=\233i,
15036 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
15037 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
15038 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15039 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
15040 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
15041 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
15042 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
15043 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
15044 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
15045 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
15046 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
15047 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
15048 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
15049 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
15050 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
15051 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
15052 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
15053 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
15054 kf9=\E[009z, khome=\E[H, kprt=\E[i,
15056 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
15057 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
15058 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
15059 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
15060 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
15061 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
15062 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
15063 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
15064 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
15065 kf8=^^x, kf9=^^y, khome=^H,
15067 dgkeys+15|Private entry describing 15 DG mode special keys,
15068 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
15069 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
15070 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
15071 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
15072 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
15073 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
15074 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
15075 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
15076 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
15077 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
15078 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
15081 # Data General color terminals use the "Tektronix" color model. The total
15082 # number of colors varies with the terminal model, as does support for
15083 # attributes used in conjunction with color.
15085 # Removed u7, u8 definitions since they conflict with tack:
15086 # Preserve user-defined colors in at least some cases.
15088 # Default is ACM mode.
15089 # u8=^^F}20^^Fi^^F}21,
15091 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
15093 colors#16, ncv#53, pairs#0x100,
15095 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15096 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15097 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15098 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15099 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
15101 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
15104 # Video attributes are coordinated using static variables set by "sgr", then
15105 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
15106 # (D=dim, U=underline, B=blink, R=reverse.)
15107 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
15109 colors#8, ncv#16, pairs#64,
15110 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
15111 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15112 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15113 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
15114 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15115 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
15116 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
15118 dg+color|Color info for Data General D470C terminals in ANSI mode,
15119 colors#16, ncv#53, pairs#0x100,
15120 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
15121 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
15123 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
15124 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
15126 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
15127 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
15129 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
15130 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
15134 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
15136 colors#8, ncv#16, pairs#64,
15138 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
15140 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
15142 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
15144 dgmode+color|Color info for Data General D470C terminals in DG mode,
15145 colors#16, pairs#0x100,
15146 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15147 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15148 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
15149 %{4}%&%t%{1}%|%;%;%{48}%+%c,
15152 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
15154 colors#52, ncv#53, pairs#26,
15155 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
15156 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
15157 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
15159 oc=\036RG01A00FF00000000\036RG01B00000000FF00
15160 \036RG01C007F00000000\036RG01D000000007F00,
15161 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
15162 scp=\036RG2%p1%02X,
15164 # Colors are in the order: normal, reverse, dim, dim + reverse.
15165 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
15167 colors#52, ncv#53, pairs#26,
15168 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
15169 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
15170 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
15171 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
15172 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
15173 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
15174 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
15175 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
15176 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?0
15177 0000000\036RG01=000000007?00,
15178 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
15179 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
15181 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
15182 # Initialization string 1 sets:
15183 # ^R - vertical scrolling enabled
15184 # ^C - blinking enabled
15185 dg-generic|Generic Data General terminal in DG mode,
15188 bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
15189 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C,
15190 mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
15191 smul=^T, use=dgkeys+11,
15193 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
15194 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
15195 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
15196 # maybe they were originally nuls (which would fit).
15198 dg200|data general dasher 200,
15201 bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
15202 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n,
15203 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
15204 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
15205 kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U,
15208 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
15209 dg210|dg-ansi|Data General 210/211,
15212 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
15213 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15214 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15215 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
15216 smso=\E[7;m, smul=\E[4;m,
15217 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
15218 # courtesy of Carlos Rucalde of Vantage Software, Inc.
15219 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
15220 # I suspect the d200 function keys actually work on the dg211, check it out.)
15221 dg211|Data General d211,
15222 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
15223 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L,
15224 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
15226 # dg450 from Cornell (not official)
15227 dg450|dg6134|data general 6134,
15228 cub1@, cuf1=^X, use=dg200,
15231 # Note: lesser Dasher terminals will not work with vi because vi insists upon
15232 # having a command to move straight down from any position on the bottom line
15233 # and scroll the screen up, or a direct vertical scroll command. The 460 and
15234 # above have both, the D210/211, for instance, has neither. We must use ANSI
15235 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
15236 # backspace on all terminals. This is not so in DG mode.
15237 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
15238 # grounds that there is no matching ":ml:"
15239 dg460-ansi|Data General Dasher 460 in ANSI-mode,
15240 OTbs, am, msgr, ul,
15241 cols#80, it#8, lines#24,
15242 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
15243 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
15244 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
15245 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
15246 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15247 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
15248 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
15249 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
15250 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
15251 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
15252 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
15254 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
15255 u7=\E[6n, u8=\E[5n, u9=\E[0n,
15256 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
15257 # Data General 605x
15258 # Ought to work for a Model 6242, Type D210 as well as a 605x.
15259 # Note that the cursor-down key transmits ^Z. Job control users, beware!
15260 # This also matches a posted description of something called a `Dasher 100'
15261 # so there's a dg100 alias here.
15262 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
15263 dg6053-old|dg100|data general 6053,
15266 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
15267 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
15268 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
15269 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
15270 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
15271 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
15274 # (Some performance can be gained over the generic DG terminal type)
15275 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
15277 home=\020\0\0, ll=^P\0^W, use=dg-generic,
15279 # Like 6053, but adds reverse video and more keypad and function keys.
15280 d200|d200-dg|Data General DASHER D200,
15281 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
15282 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15283 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
15284 sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053,
15286 # DASHER D210 series terminals in ANSI mode.
15287 # Reverse video, no insert/delete character/line, 7 bits/character only.
15289 # Initialization string 1 sets:
15290 # <0 - scrolling enabled
15291 # <1 - blink enabled
15292 # <4 - print characters regardless of attributes
15293 d210|d214|Data General DASHER D210 series,
15296 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r,
15297 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
15298 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15299 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
15300 el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l,
15301 ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
15302 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
15304 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
15306 # DASHER D210 series terminals in DG mode.
15307 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
15308 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
15310 ed=^^FF, use=d200-dg,
15312 # DASHER D211 series terminals in ANSI mode.
15313 # Like the D210, but with 8-bit characters and local printer support.
15315 # Initialization string 2 sets:
15317 # 2;1 - 8 bit operations
15318 # 1;1 - 8 bit (international) keyboard language
15319 # \E(B - default primary character set (U.S. ASCII)
15320 # \E)4 - default secondary character set (international)
15321 # ^O - primary character set
15323 d211|d215|Data General DASHER D211 series,
15325 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
15328 # Initialization string 2 sets:
15330 # 2;0 - 7 bit operations
15331 # 1;0 - 7 bit (native) keyboard language
15332 # \E(0 - default character set (the keyboard native language)
15333 # ^O - primary character set
15334 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
15336 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
15338 # Like the D210 series, but adds support for 8-bit characters.
15340 # Reset string 2 sets:
15341 # ^^N - secondary character set
15342 # ^^FS0> - 8 bit international character set
15343 # ^^O - primary character set
15344 # ^^FS00 - default character set (matching the native keyboard language)
15346 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
15348 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
15350 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
15353 # Enhanced DG mode with changes to be more UNIX compatible.
15354 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
15357 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
15358 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
15359 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n,
15360 is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1,
15361 kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC,
15362 kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9,
15363 mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
15364 rs2=\036N\036FS0E\036O\036FS00,
15365 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
15366 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
15368 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
15369 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
15370 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
15372 is3=^^Fz2, use=d216+,
15374 d217-unix|Data General DASHER D217 in DG-UNIX mode,
15376 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
15379 # DASHER D220 color terminal in ANSI mode.
15380 # Like the D470C but with fewer colors and screen editing features.
15382 # Initialization string 1 sets:
15384 # <0 - scrolling enabled
15385 # <1 - blink enabled
15386 # <4 - print characters regardless of attributes
15387 # \E[m - all attributes off
15388 # Reset string 1 sets:
15389 # \Ec - initial mode defaults (RIS)
15391 d220|Data General DASHER D220,
15393 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
15394 use=dg+color8, use=d470c,
15396 d220-7b|Data General DASHER D220 in 7 bit mode,
15398 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
15399 use=dg+color8, use=d470c-7b,
15401 # Initialization string 3 sets:
15402 # - default cursor (solid rectangle)
15403 # Reset string 2 sets:
15404 # ^^N - secondary character set
15405 # ^^FS0> - 8 bit international character set
15406 # ^^O - primary character set
15407 # ^^FS00 - default character set (matching the native keyboard language)
15409 d220-dg|Data General DASHER D220 color terminal in DG mode,
15411 dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@,
15412 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
15415 # DASHER D230C color terminal in ANSI mode.
15416 # Like the D220 but with minor ANSI compatibility improvements.
15418 d230c|d230|Data General DASHER D230C,
15419 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n,
15420 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
15421 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e
15422 %{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}
15423 %e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
15424 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
15425 smul=\E[4;50m, use=dgkeys+7b, use=d220,
15427 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
15430 # DASHER D400/D450 series terminals.
15431 # These add intelligent features like insert/delete to the D200 series.
15433 # Initialization string 2 sets:
15434 # ^^FQ2 - default cursor (solid rectangle)
15435 # ^^FW - character protection disabled
15436 # ^^FJ - normal (80 column) mode
15437 # ^^F\^ - horizontal scrolling enabled (for alignment)
15438 # ^^FX004? - margins at columns 0 and 79
15439 # ^^F] - horizontal scrolling disabled
15440 # ^^O - primary character set
15441 # ^^FS00 - default character set (the keyboard native language)
15442 # - (should reset scrolling regions, but that glitches the screen)
15443 # Reset string 1 sets:
15444 # ^^FA - all terminal defaults except scroll rate
15445 # Reset string 2 sets:
15446 # ^^F] - horizontal scrolling disabled
15447 # ^^FT0 - jump scrolling
15449 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
15451 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2,
15452 dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG,
15453 hpa=\020%p1%c\177, ich1=^^J, il1=^^FH,
15454 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
15456 ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA,
15458 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15459 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
15460 sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c,
15463 # DASHER D410/D460 series terminals in ANSI mode.
15464 # These add a large number of intelligent terminal features.
15466 # Initialization string 1 sets:
15468 # <0 - scrolling enabled
15469 # <1 - blink enabled
15470 # <2 - horizontal scrolling enabled (for alignment)
15471 # <4 - print characters regardless of attributes
15472 # \E[5;0v - normal (80 column) mode
15473 # \E[1;1;80w - margins at columns 1 and 80
15475 # 1 - print all characters even if protected
15476 # 6 - character protection disabled
15477 # <2 - horizontal scrolling disabled
15478 # - (should reset scrolling regions, but that glitches the screen)
15480 # Initialization string 2 sets:
15482 # 3;2 - default cursor (solid rectangle)
15483 # 2;1 - 8 bit operations
15484 # 1;1 - international keyboard language
15485 # \E(B - default primary character set (U.S. ASCII)
15486 # \E)4 - default secondary character set (international)
15487 # ^O - primary character set
15489 # Reset string 1 sets:
15490 # \Ec - initial mode defaults (RIS)
15491 # \E[<2h - horizontal scrolling disabled
15493 # Reset string 2 sets:
15495 # 4;0 - jump scrolling
15496 # 2;1 - 8 bit operations
15497 # 1;1 - 8 bit (international) keyboard language
15498 # \E(B - default primary character set (U.S. ASCII)
15499 # \E)4 - default secondary character set (international)
15501 d410|d411|d460|d461|Data General DASHER D410/D460 series,
15503 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
15504 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
15505 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
15506 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
15507 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
15508 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
15509 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
15510 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
15511 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
15512 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
15514 # Initialization string 2 sets:
15516 # 3;2 - default cursor (solid rectangle)
15517 # 2;0 - 7 bit operations
15518 # 1;0 - 7 bit (native) keyboard language
15519 # \E(0 - default character set (the keyboard native language)
15520 # ^O - primary character set
15522 # Reset string 2 sets:
15524 # 4;0 - jump scrolling
15525 # 2;0 - 7 bit operations
15526 # 1;0 - 7 bit (native) keyboard language
15527 # \E(0 - default character set (the keyboard native language)
15529 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
15531 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
15532 rs2=\E[4;0;2;0;1;0v\E(0,
15533 sgr=\E[%?%p1%p5%|%t2;%;%?%p2%p6%|%t4;%;%?%p1%p3%|%p6%|%t7;%;
15534 %?%p4%t5;%;m%?%p9%t\016%e\017%;,
15535 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
15537 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
15539 enacs@, rmacs=\036FS00,
15540 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15541 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
15543 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
15546 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
15548 # Initialization string 1 sets:
15550 # <0 - scrolling enabled
15551 # <1 - blink enabled
15552 # <2 - horizontal scrolling enabled (for alignment)
15553 # <4 - print characters regardless of attributes
15554 # \E[5;1v - compressed (135 column) mode
15555 # \E[1;1;126 - margins at columns 1 and 126
15557 # 1 - print all characters even if protected
15558 # 6 - character protection disabled
15559 # <2 - horizontal scrolling disabled
15560 # - (should reset scrolling regions, but that glitches the screen)
15562 # Reset string 1 sets:
15563 # \Ec - initial mode defaults (RIS)
15564 # \E[5;1v - compressed (135 column) mode
15565 # \E[1;1;126w - margins at columns 1 and 126
15566 # \E[<2h - horizontal scrolling disabled
15568 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
15570 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15571 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
15573 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
15575 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15576 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
15578 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
15581 # These add intelligent features like scrolling regions.
15582 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
15583 civis=^^FQ0, clear=^^FE, cnorm=^^FQ5,
15584 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
15585 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
15586 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
15588 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
15589 rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10,
15590 vpa=\036FPFF%p1%2.2X,
15591 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15592 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15594 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
15596 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
15598 rs2=\036P@1\036FK\036FX0083,
15599 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
15600 %>%t001%;\036FX%p3%2.2X%p4%2.2X,
15602 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
15605 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
15606 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15608 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
15610 clear=\036FG\036PH, fsl=\036F}01\022,
15611 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
15612 tsl=\036F}00\036FP%p1%2.2X18\036PG,
15613 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15614 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
15617 # Relative cursor motions are confined to the current window,
15618 # which is not what the scrolling region specification expects.
15619 # Thus, relative vertical cursor positioning must be deleted.
15620 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
15621 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
15623 cud1@, cuu1@, ll@, use=d462+,
15625 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
15627 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
15629 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
15631 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
15633 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
15636 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
15638 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
15640 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
15642 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
15644 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
15647 d430c-dg|d430-dg|Data General D430C in DG mode,
15648 use=d413-dg, use=dg+fixed,
15649 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
15650 use=d413-dg, use=dg+ccc,
15652 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
15653 use=d413-unix, use=dgunix+fixed,
15654 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
15655 use=d413-unix-w, use=dgunix+fixed,
15656 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
15657 use=d413-unix-25, use=dgunix+fixed,
15658 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
15659 use=d413-unix-s, use=dgunix+fixed,
15660 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
15661 use=d413-unix-sr, use=dgunix+fixed,
15662 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
15663 use=d413-unix, use=dgunix+ccc,
15664 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
15665 use=d413-unix-w, use=dgunix+ccc,
15666 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
15667 use=d413-unix-25, use=dgunix+ccc,
15668 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
15669 use=d413-unix-s, use=dgunix+ccc,
15670 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
15671 use=d413-unix-sr, use=dgunix+ccc,
15673 # DASHER D470C color terminal in ANSI mode.
15674 # Like the D460 but with 16 colors and without a compressed mode.
15676 # Initialization string 1 sets:
15678 # <0 - scrolling enabled
15679 # <1 - blink enabled
15680 # <2 - horizontal scrolling enabled (for alignment)
15681 # <4 - print characters regardless of attributes
15682 # \E[1;1;80w - margins at columns 1 and 80
15684 # 1 - print all characters even if protected
15685 # 6 - character protection disabled
15686 # <2 - horizontal scrolling disabled
15687 # - (should reset scrolling regions, but that glitches the screen)
15689 d470c|d470|Data General DASHER D470C,
15690 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15691 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15692 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
15693 use=dg+color, use=d460,
15695 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
15696 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15697 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15698 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
15699 use=dg+color, use=d460-7b,
15701 # Initialization string 2 sets:
15702 # ^^FQ2 - default cursor (solid rectangle)
15703 # ^^FW - character protection disabled
15704 # ^^F\^ - horizontal scrolling enabled (for alignment)
15705 # ^^FX004? - margins at columns 0 and 79
15706 # ^^F] - horizontal scrolling disabled
15707 # ^^O - primary character set
15708 # ^^FS00 - default character set (the keyboard native language)
15709 # - (should reset scrolling regions, but that glitches the screen)
15711 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
15712 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
15714 use=dgmode+color, use=d460-dg,
15716 # DASHER D555 terminal in ANSI mode.
15717 # Like a D411, but has an integrated phone.
15718 d555|Data General DASHER D555,
15720 d555-7b|Data General DASHER D555 in 7-bit mode,
15722 d555-w|Data General DASHER D555 in wide mode,
15724 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
15726 d555-dg|Data General DASHER D555 series in DG mode,
15729 # DASHER D577 terminal in ANSI mode.
15730 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
15731 d577|Data General DASHER D577,
15733 d577-7b|Data General DASHER D577 in 7-bit mode,
15735 d577-w|Data General DASHER D577 in wide mode,
15737 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
15740 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
15743 # DASHER D578 terminal.
15744 # Like a D577, but without compressed mode; like a D470C in this respect.
15746 # Initialization string 1 sets:
15748 # <0 - scrolling enabled
15749 # <1 - blink enabled
15750 # <2 - horizontal scrolling enabled (for alignment)
15751 # <4 - print characters regardless of attributes
15752 # \E[1;1;80w - margins at columns 1 and 80
15754 # 1 - print all characters even if protected
15755 # 6 - character protection disabled
15756 # <2 - horizontal scrolling disabled
15757 # - (should reset scrolling regions, but that glitches the screen)
15759 d578|Data General DASHER D578,
15760 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
15761 d578-7b|Data General DASHER D578 in 7-bit mode,
15762 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
15764 #### Datamedia (dm)
15766 # Datamedia was headquartered in Nashua, New Hampshire until it went
15767 # out of business in 1993, but the ID plates on the terminals referred
15768 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
15769 # manufacturer which threw out all information about the terminals.
15772 cs10|colorscan|Datamedia Color Scan 10,
15775 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
15776 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15777 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15778 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
15779 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15780 cs10-w|Datamedia Color Scan 10 with 132 columns,
15782 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
15784 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
15785 dm1520|dm1521|datamedia 1520,
15787 cols#80, it#8, lines#24,
15788 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
15789 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
15790 home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
15792 # dm2500: this terminal has both <ich> and <smir>. Applications using
15793 # termcap/terminfo directly (rather than through ncurses) might be confused.
15794 dm2500|datamedia2500|datamedia 2500,
15797 bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
15798 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
15799 dch1=\020\010\030\035$<10*>,
15800 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
15801 ich1=\020\034\030\035$<10*>,
15802 il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377,
15803 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
15804 smdc=^P, smir=^P, smso=^N,
15805 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
15806 # also, has a meta-key.
15807 # From: <goldberger@su-csli.arpa>
15808 # (dmchat: ":MT:" changed to ":km:" -- esr)
15809 dmchat|dmchat version of datamedia 2500,
15811 dl1=\020\032\030\035$<2/>,
15812 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
15813 # (dm3025: ":MT:" changed to ":km:" -- esr)
15814 dm3025|datamedia 3025a,
15816 cols#80, it#8, lines#24,
15817 bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
15818 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
15819 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
15820 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
15821 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
15822 smir=\EP, smso=\EO1,
15823 dm3045|datamedia 3045a,
15824 OTbs, am, eo, km@, ul, xenl,
15825 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
15826 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
15827 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
15828 khome=\EH, pad=^?, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
15830 # Datamedia DT80 soft switches:
15831 # 1 0=Jump 1=Smooth
15832 # Autorepeat 0=off 1=on
15833 # Screen 0=Dark 1=light
15834 # Cursor 0=u/l 1=block
15836 # 2 Margin Bell 0=off 1=on
15837 # Keyclick 0=off 1=on
15838 # ANSI/VT52 0=VT52 1=ANSI
15839 # Xon/Xoff 0=Off 1=On
15841 # 3 Shift3 0=Hash 1=UK Pound
15843 # Newline 0=Off 1=On
15844 # Interlace 0=Off 1=On
15846 # 4 Parity 0=Odd 1=Even
15847 # Parity 0=Off 1=On
15848 # Bits/Char 0=7 1=8
15849 # Power 0=60Hz 1=50Hz
15851 # 5 Line Interface 0=EIA 1=Loop
15852 # Aux Interface 0=EIA 1=Loop
15853 # Local Copy 0=Off 1=On
15856 # 6 Aux Parity 0=Odd 1=Even
15857 # Aux Parity 0=Off 1=On
15858 # Aux Bits/Char 0=7 1=8
15859 # CRT Saver 0=Off 1=On
15860 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
15861 dm80|dmdt80|dt80|datamedia dt80/1,
15862 clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
15863 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15864 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
15865 rmso=\E[m, rmul=\E[m, sgr0=\E[m\017$<2>, smso=\E[7m,
15866 smul=\E[4m, use=vt100+4bsd,
15867 # except in 132 column mode, where it needs a little padding.
15868 # This is still less padding than the vt100, and you can always turn on
15869 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
15871 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
15873 clear=\E[H\E[2J$<50/>, cud1=\n,
15874 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
15875 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
15876 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
15877 dt80-sas|Datamedia DT803/DTX for SAS usage,
15880 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
15881 bel=^G, clear=^L, cr=\r,
15882 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
15883 cub1=^H, cud1=\EB, cuf1=^\,
15884 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
15885 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
15886 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n,
15887 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
15888 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
15889 smso=\E$2\004, tbc=\E'0,
15891 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
15892 # These aren't end-all Excel termcaps; but do insert/delete char/line
15893 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
15894 # The naming convention has been bent somewhat, with the use of E? (where
15895 # E is for 'Excel') as # a name. This was done to distinguish the entries
15896 # from the other Datamedias in use here, and yet to associate a model of
15897 # the Excel terminals with the regular datamedia terminals that share
15898 # major characteristics.
15899 excel62|excel64|datamedia Excel 62,
15900 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
15901 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
15903 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
15904 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
15905 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
15907 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
15908 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
15909 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
15910 smir=\E[4h, use=dt80,
15914 # Falco Data Products
15915 # 440 Potrero Avenue
15916 # Sunnyvale, CA 940864-196
15917 # Vox: (800)-325-2648
15918 # Fax: (408)-745-7860
15919 # Net: techsup@charm.sys.falco.com
15921 # Current Falco models as of 1995 are generally ANSI-compatible and support
15922 # emulations of DEC VT-series, Wyse, and Televideo types.
15925 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
15926 # This terminal was released around 1983 and was discontinued long ago.
15927 # The standout and underline highlights are the same.
15928 falco|ts1|ts-1|falco ts-1,
15930 cols#80, it#8, lines#24,
15931 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
15932 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15933 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
15934 ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
15935 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
15936 smir=\Eq, smso=\Eg1, smul=\Eg1,
15937 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
15938 OTbs, am, da, db, mir, msgr, ul,
15939 cols#80, it#8, lines#24,
15940 bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B,
15941 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
15942 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
15943 il1=\EE, ind=\n, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
15944 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
15945 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
15946 smso=\Eg4, smul=\Eg1,
15947 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
15948 ts100|ts100-sp|falco ts100-sp,
15949 am, mir, msgr, xenl, xon,
15950 cols#80, it#8, lines#24, vt#3,
15951 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15952 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
15953 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
15954 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
15955 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
15956 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
15957 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
15958 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
15959 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, is1=\E~)\E~ea,
15960 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15961 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
15962 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
15963 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15964 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
15965 %;m%?%p9%t\016%e\017%;$<2>,
15966 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
15967 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
15969 ts100-ctxt|falco ts-100 saving context,
15970 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
15972 #### Florida Computer Graphics
15975 # Florida Computer Graphics Beacon System, using terminal emulator program
15976 # "host.com", as provided by FCG. This description is for an early release
15977 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
15980 # From: David Bryant <cbosg!djb> 1/7/83
15981 beacon|FCG Beacon System,
15984 bel=\ESTART\r\E37\r\EEND\r$<1>,
15985 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r,
15986 cub1=^H, cud1=\n, cuf1=\EV,
15987 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
15988 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
15989 ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
15990 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
15991 rmul=\ESTART\r\E60\,0\r\EEND\r,
15992 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
15993 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
15994 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
15995 smul=\ESTART\r\E60\,1\r\EEND\r,
16000 # The f1720a differences from ANSI: no auto margin, destructive
16001 # tabs, # of lines, funny highlighting and underlining
16002 f1720|f1720a|fluke 1720A,
16004 cols#80, lines#16, xmc#1,
16005 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
16006 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
16007 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
16008 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
16009 smso=\E[7m, smul=\E[4m,
16011 #### Liberty Electronics (Freedom)
16013 # Liberty Electronics
16014 # 48089 Fremont Blvd
16016 # Vox: (510)-623-6000
16017 # Fax: (510)-623-7021
16019 # From: <faletti@berkeley.edu>
16020 # (f100: added empty <acsc> to suppress a tic warning;
16021 # made this relative to adm+sgr -- note that <invis> isn't
16022 # known to work for f100 but does on the f110. --esr)
16023 f100|freedom|freedom100|freedom model 100,
16024 OTbs, am, bw, hs, mir, msgr, xon,
16026 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n,
16027 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16028 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
16029 flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c,
16030 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>,
16031 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
16032 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
16033 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16034 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
16035 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
16036 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
16037 f100-rv|freedom-rv|freedom 100 in reverse video,
16038 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
16039 # The f110 and f200 have problems with vi(1). They use the ^V
16040 # code for the down cursor key. When kcud1 is defined in terminfo
16041 # as ^V, the Control Character Quoting capability (^V in insert mode)
16042 # is lost! It cannot be remapped in vi because it is necessary to enter
16043 # a ^V to to quote the ^V that is being remapped!!!
16045 # f110/f200 users will have to decide whether
16046 # to lose the down cursor key or the quoting capability. We will opt
16047 # initially for leaving the quoting capability out, since use of VI
16048 # is not generally applicable to most interactive applications
16049 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
16050 f110|freedom110|Liberty Freedom 110,
16053 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
16054 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
16055 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
16056 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
16057 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
16058 smso=\EG<, tsl=\Ef, use=f100,
16059 f110-14|Liberty Freedom 110 14inch,
16061 f110-w|Liberty Freedom 110 - 132 cols,
16062 cols#132, use=f110,
16063 f110-14w|Liberty Freedom 110 14in/132 cols,
16066 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
16067 f200|freedom200|Liberty Freedom 200,
16068 OTbs, am, eslok, hs, mir, msgr, xon,
16069 cols#80, it#8, lines#24, wsl#80,
16070 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
16071 clear=^Z, cnorm=\E.1, cr=\r,
16072 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
16073 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16074 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
16075 flash=\Eo$<200/>\En, fsl=\r, home=^^,
16076 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H,
16077 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
16078 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
16079 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16080 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
16081 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
16082 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
16083 f200-w|Liberty Freedom 200 - 132 cols,
16084 cols#132, use=f200,
16085 # The f200 has the ability to reprogram the down cursor key. The key is
16086 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
16087 # so powering the terminal off and on will not cause the change to be lost.
16088 f200vi|Liberty Freedom 200 for vi,
16089 flash=\Eb$<200/>\Ed, kcud1=\n, use=f200,
16090 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
16091 cols#132, use=f200vi,
16095 # Graphon Corporation
16096 # 544 Division Street
16097 # Campbell, CA 95008
16098 # Vox: (408)-370-4080
16099 # Fax: (408)-370-5047
16100 # Net: troy@graphon.com (Troy Morrison)
16103 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
16104 # including one odd hybrid that starts out life on power-up as a character
16105 # terminal, than can be switched to X graphics mode (driven over the serial
16106 # line) by an escape sequence. No info on this beast yet.
16107 # (go140: I added <rmam>/<smam> based on the init string -- esr)
16108 go140|graphon go-140,
16110 cols#80, it#8, lines#24,
16111 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
16112 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16113 ed=\E[J$<10/>, el=\E[K, ht=^I,
16114 if=/usr/share/tabset/vt100, il1=\E[L,
16115 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
16116 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
16117 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
16118 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
16119 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
16120 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
16121 go140w|graphon go-140 in 132 column mode,
16124 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
16126 # Hacked up vt200 termcap to handle GO-225/VT220
16127 # From: <edm@nwnexus.WA.COM>
16128 # (go225: I added <rmam>/<smam> based on the init string -- esr)
16129 go225|go-225|Graphon 225,
16130 OTbs, am, mir, xenl,
16131 cols#80, it#8, lines#25, vt#3,
16132 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
16133 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
16134 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16135 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
16136 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
16137 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
16138 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
16139 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
16140 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
16141 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
16142 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
16143 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
16145 #### Harris (Beehive)
16147 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
16148 # Their terminal group is ancient history now (1995) though the parent
16149 # company is still in business.
16152 # Beehive documentation is undated and marked Preliminary and has no figures
16153 # so we must have early Superbee2 (Model 600, according to phone conversation
16154 # with mfr.). It has proved reliable except for some missing padding
16155 # (notably after \EK and <nl> at bottom of screen).
16157 # The key idea is that AEP mode is poison for <cup> & that US's in
16158 # the local memory should be avoided like the plague. That means
16159 # that the 2048 character local buffer is used as 25 lines of 80
16160 # characters, period. No scrolling local memory, folks. It also
16161 # appears that we cannot use naked INS LINE feature since it uses
16162 # US. The sbi fakes <il1> with an 80-space insert that may be too
16163 # slow at low speeds; also spaces get converted to \040 which is
16164 # too long for some programs (not vi). DEL LINE is ok but slow.
16166 # The <nl> string is designed for last line of screen ONLY; cup to
16167 # 25th line corrects the motion inherent in scrolling to Page 1.
16169 # There is one understood bug. It is that the screen appears to
16170 # pop to a new (blank) page after a <nel>, or leave a half-line
16171 # ellipsis to a quad that is the extra 48 memory locations. The
16172 # data received is dumped into memory but not displayed. Not to
16173 # worry if <cup> is being used; the lines not displayed will be,
16174 # whenever the cursor is moved up there. Since <cup> is addressed
16175 # relative to MEMORY of window, nothing is lost; but beware of
16176 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
16177 # therefore, is setenv MORE -c .
16179 # WARNING: Not all features tested.
16181 # Timings are assembled from 3 sources. Some timings may reflect
16182 # SB2/Model 300 that were used if more conservative.
16183 # Tested on a Model 600 at 1200 and 9600 bd.
16185 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
16186 # placed on the keyboard and useless because of AEP, is made
16187 # into a backspace key. In use ESC must be pressed twice (to send)
16188 # and sending ^C must be prefixed by ESC to avoid that weird
16189 # transmit mode associated with ENTER key.
16191 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
16192 # the screen, then it has dropped into ENTER mode; hit
16193 # RESET--ONLINE--!tset.
16195 # As delivered this machine has a FATAL feature that will throw
16196 # it into that strange transmit state (SPOW) if the space bar is
16197 # hit after a CR is received, but before receiving a LF (or a
16200 # The circuits MUST be modified to eliminate the SPOW latch.
16201 # This is done by strapping on chip A46 of the I/O board; cut
16202 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
16203 # chip. This mod has been checked out on a Mod 600 of Superbee II.
16204 # With this modification absurdly high timings on cr are
16207 # NOTE WELL that the rear panel switch should be set to CR/LF,
16210 sb1|beehive superbee,
16211 OTbs, am, bw, da, db, mir, ul, xsb,
16212 cols#80, lines#25, xmc#1,
16213 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
16214 cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
16215 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
16216 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
16217 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16218 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16219 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
16220 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
16221 ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
16222 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
16223 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
16224 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
16225 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
16226 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
16227 smso=\E_1, smul=\E_0, tbc=\E3,
16228 sbi|superbee|beehive superbee at Indiana U.,
16230 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
16232 # Alternate (older) description of Superbee - f1=escape, f2=^C.
16233 # Note: there are at least 3 kinds of superbees in the world. The sb1
16234 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
16235 # The sb3 puts garbage on the bottom of the screen when you scroll with
16236 # the switch in the back set to CRLF instead of AEP. This description
16237 # is tested on the sb2 but should work on all with either switch setting.
16238 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
16239 # the other two if you want to try to hit that tiny escape key.
16240 # This description is tricky: being able to use cup depends on there being
16241 # 2048 bytes of memory and the hairy <nl> string.
16242 superbee-xsb|beehive super bee,
16244 cols#80, it#8, lines#25,
16245 clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
16246 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
16247 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
16248 home=\EH, ht=^I, hts=\E1,
16249 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
16250 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
16251 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
16252 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
16253 # This loses on lines > 80 chars long, use at your own risk
16254 superbeeic|super bee with insert char,
16255 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
16256 sb2|sb3|fixed superbee,
16257 xsb@, use=superbee,
16259 #### Beehive Medical Electronics
16261 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
16262 # Regarding your question though; Beehive terminals weren't made by Harris.
16263 # They were made by Beehive Medical Electronics in Utah. They went out of
16264 # business in the early '80s.
16266 # (OK, then, I don't know why a couple of these say "harris beehive".)
16269 # Reports are that most of these Beehive entries (except superbee) have not
16270 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
16272 # (bee: <ich1> was empty, which is obviously bogus -- esr)
16273 beehive|bee|harris beehive,
16276 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
16277 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
16278 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
16279 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16280 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
16281 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
16282 smir=\EQ, smso=\EdP, smul=\Ed`,
16283 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
16284 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
16285 # look at those spaces in <rmso>/<smso>. Seems strange to me...
16286 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
16287 # really care, cook up one using ^F -- esr)
16288 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
16290 cols#80, it#8, lines#20,
16291 bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
16292 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
16293 il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
16294 beehive4|bh4|beehive 4,
16297 bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
16298 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n,
16299 # There was an early Australian kit-built computer called a "Microbee".
16300 # It's not clear whether this is for one of those or for a relative
16302 microb|microbee|micro bee series,
16304 cols#80, it#8, lines#24,
16305 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16306 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
16307 el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16308 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
16309 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
16310 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
16312 # 8675, 8686, and bee from Cyrus Rahman
16313 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
16314 ha8675|harris 8675,
16315 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
16316 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
16317 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
16319 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
16321 ha8686|harris 8686,
16322 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
16323 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
16324 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
16326 kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C,
16327 kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C,
16328 kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI,
16329 kf7=\ER, kf8=\EJ, kf9=\E(, use=bee,
16333 # Hazeltine appears to be out of the terminal business as of 1995. These
16334 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
16335 # Harris. They have a hazeltine.com domain (but no web page there ) and can
16339 # 450 East Pulaski Road
16340 # Greenlawn, New York 11740
16342 # As late as 1993, manuals for the terminal product line could still be
16345 # TRW Customer Service Division
16348 # Fairfield, NJ 07007-2078
16350 # They're now (1998) a subsidiary of General Electric, operating under the
16351 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
16352 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
16355 # Since <cuf1> is blank, when you want to erase something you
16356 # are out of luck. You will have to do ^L's a lot to
16357 # redraw the screen. h1000 is untested. It doesn't work in
16358 # vi - this terminal is too dumb for even vi. (The code is
16359 # there but it isn't debugged for this case.)
16360 hz1000|hazeltine 1000,
16363 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
16365 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
16366 hz1420|hazeltine 1420,
16369 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
16370 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
16371 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y,
16373 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
16374 # freakout with out-of-range args and tn3270. No hz since it needs to
16376 hz1500|hazeltine 1500,
16379 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16380 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
16381 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
16382 il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P,
16383 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
16384 # h1510 assumed to be in sane escape mode. Else use h1500.
16385 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
16386 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
16387 # removed incorrect and overridden ":do=^J:" -- esr)
16388 hz1510|hazeltine 1510,
16391 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
16392 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
16393 el=\E^O, il1=\E^Z, ind=\n,
16395 # The following switch settings are assumed for normal operation:
16396 # FULL CR U/L_CASE ESCAPE
16397 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
16398 # Other switches may be set for operator convenience or communication
16400 hz1520|Hazeltine 1520,
16401 OTbs, am, bw, msgr,
16403 bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n,
16404 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
16405 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H,
16406 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
16407 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
16408 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
16409 # This version works with the escape switch off
16410 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
16411 hz1520-noesc|hazeltine 1520,
16414 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16415 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
16416 home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_,
16417 # Note: the h1552 appears to be the first Hazeltine terminal which
16418 # is not braindamaged. It has tildes and backprimes and everything!
16419 # Be sure the auto lf/cr switch is set to cr.
16420 hz1552|hazeltine 1552,
16422 cud1=\n, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
16423 lf2=red, lf3=green, use=vt52,
16424 hz1552-rv|hazeltine 1552 reverse video,
16425 cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
16426 # Note: h2000 won't work well because of a clash between upper case and ~'s.
16427 hz2000|hazeltine 2000,
16430 bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
16431 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
16432 il1=~\032$<6>, ind=\n, pad=^?,
16433 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
16434 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
16435 # to work ok. There is one problem though if one types a lot of garbage
16436 # characters very fast vi seems not able to keep up and hangs while trying
16437 # to insert. That's in insert mode while trying to insert in the middle of
16438 # a line. It might be because the Esprit doesn't have insert char and delete
16439 # char as a built in function. Vi has to delete to end of line and then
16440 # redraw the rest of the line.
16441 esprit|Hazeltine Esprit I,
16444 bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K,
16445 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
16446 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H,
16447 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n,
16448 kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n,
16449 kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
16450 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
16451 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
16452 esprit-am|hazeltine esprit auto-margin,
16454 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
16455 # Vi it seems always wants to send a control J for "do" and it turned out
16456 # that the terminal would work somewhat if the auto LF/CR was turned off.
16457 # (hmod1: removed :dn=~^K: -- esr)
16458 hmod1|Hazeltine Modular 1,
16461 bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
16462 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
16463 ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
16464 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
16466 # Hazeltine Executive 80 Model 30 (1554?)
16467 # from Will Martin <control@ALMSA-1.ARPA> via BRL
16468 # Like VT100, except for different "am" behavior.
16469 hazel|exec80|h80|he80|Hazeltine Executive 80,
16471 cols#80, it#8, lines#24, vt#3,
16472 OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
16473 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
16474 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
16475 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
16476 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
16477 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
16478 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
16479 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
16480 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
16481 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
16482 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
16483 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
16489 ibm327x|line mode IBM 3270 style,
16491 clear=\r\n, el=\r, home=\r,
16493 ibm3101|i3101|IBM 3101-10,
16496 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16497 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
16498 el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
16499 kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
16500 ibm3151|IBM 3151 display,
16501 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
16502 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
16503 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
16504 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
16505 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
16506 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
16507 # removed kend, knp, kpp -TD
16509 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
16510 # Added ich1 (kich1 without ich1 doesn't make sense).
16511 # Added il1 (kil1 without il1 doesn't make sense).
16512 # Added xon (terminal uses XON/XOFF flow control).
16514 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
16515 OTbs, am, mir, msgr, xon,
16516 cols#80, it#8, lines#24,
16517 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
16519 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED,
16520 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16521 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
16522 ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2,
16523 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16524 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
16525 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
16526 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
16527 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
16528 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
16529 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
16530 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
16531 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
16532 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
16533 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
16534 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
16535 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
16536 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
16538 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
16539 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
16541 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
16542 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
16545 ibm3162|IBM 3162 display,
16546 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
16547 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
16550 # This really should not use setab/setaf, but it is clear that the
16551 # original terminfo does not toggle red/blue colors as in setb/setf.
16552 ibm3164|i3164|IBM 3164,
16554 colors#8, pairs#64,
16555 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
16556 setab=\E4 %p1%{64}%+%c,
16557 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
16558 smcup=\E!9/N\E>B, use=ibm3161,
16560 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
16562 cols#80, it#8, lines#25,
16563 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16565 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
16566 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16567 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16568 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16569 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
16570 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
16571 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
16572 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
16573 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
16574 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
16575 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
16576 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
16577 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
16578 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
16579 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
16580 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
16581 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
16582 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16583 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
16584 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
16585 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
16586 rmso=\E[m, rmul=\E[m, rs2=\Ec,
16587 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16589 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16591 ibmaed|IBM Experimental display,
16592 OTbs, am, eo, msgr,
16593 cols#80, it#8, lines#52,
16594 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
16595 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16596 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
16597 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16598 rmso=\E0, sgr0=\E0, smso=\E0,
16599 ibm-apl|apl|IBM apl terminal simulator,
16600 lines#25, use=dm1520,
16601 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
16602 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
16603 ibmmono|IBM workstation monochrome,
16605 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
16606 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
16607 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
16608 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
16609 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
16610 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
16612 ibmega|IBM Enhanced Color Display,
16613 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16614 nel=\r\n, use=ibmmono,
16615 # This color scheme is assumed in some recent IBM terminal descriptions
16616 # (green on black, emulated on a 16-color terminal).
16617 ibm+color|IBM color definitions,
16618 colors#8, ncv#3, pairs#64,
16620 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
16621 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
16622 %=%t46m%e%p1%{7}%=%t107m%;,
16623 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
16624 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
16625 %=%t36m%e%p1%{7}%=%t97m%;,
16626 ibm+16color|IBM aixterm color definitions,
16627 colors#16, pairs#0x100,
16628 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
16629 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
16630 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16631 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16632 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16633 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16634 ibm5154|IBM 5154 Color display,
16635 colors#8, ncv@, pairs#64,
16636 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16638 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
16639 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
16641 ibmvga-c|IBM VGA display color termcap,
16642 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16643 nel=\r\n, use=ibmega-c,
16644 ibmvga|IBM VGA display,
16645 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16646 nel=\r\n, use=ibmega,
16647 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
16648 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
16650 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
16651 ibm6155|IBM 6155 Black & White display,
16652 blink@, bold@, use=ibm5151,
16653 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
16654 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
16656 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
16657 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
16659 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
16661 ibm6154|IBM 6154 Color displays,
16662 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16663 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16665 sgr0=\E[0;10m, use=ibm5154,
16666 ibm6153|IBM 6153 Black & White display,
16667 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16668 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16670 sgr0=\E[0;10m, use=ibm5151,
16671 ibm6153-90|IBM 6153 Black & White display,
16673 blink@, bold@, use=ibm5151,
16674 ibm6153-40|IBM 6153 Black & White display,
16675 cols#40, lines#12, use=ibm6153-90,
16676 ibm8512|ibm8513|IBM color VGA Terminal,
16678 cols#80, it#8, lines#25,
16679 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
16680 clear=\E[H\E[J, cub1=\E[D, cud1=\n, cuf1=\E[C,
16681 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
16682 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
16683 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
16684 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
16685 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16686 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
16687 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
16688 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
16689 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
16690 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
16691 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16693 hft-c|HFT with Color,
16694 colors#8, pairs#64,
16695 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
16696 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
16697 use=ibm5151, use=ibm+color,
16698 hft-c-old|HFT with Color PC850,
16699 colors#8, pairs#64,
16700 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16702 hft-old|AIWS High Function Terminal,
16705 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
16706 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16707 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
16708 ht=^I, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, kbs=^H,
16709 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16710 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
16711 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16712 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
16713 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
16714 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
16715 ibm-system1|system1|ibm system/1 computer,
16718 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
16719 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
16721 # lft-pc850 : IBM Low Function Terminal Device
16722 # lft "supports" underline, bold, and blink in the sense that the lft code
16723 # sets all the right bits. HOWEVER, depending upon the adapter, these
16724 # attributes may or may not be supported by the device driver.
16725 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
16727 cols#80, it#8, lines#25,
16728 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16730 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16731 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16732 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16733 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16734 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
16735 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
16736 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
16737 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
16738 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
16739 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
16740 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
16741 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
16742 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
16743 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
16744 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
16745 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
16746 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
16747 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16748 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
16749 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
16750 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
16751 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
16752 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16753 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
16754 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16756 # "Megapel" refers to the display adapter, which was used with the IBM RT
16758 ibm5081|hft|IBM Megapel Color display,
16759 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
16760 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
16761 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
16764 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
16766 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
16768 ibm8514|IBM 8514/a color VGA display,
16770 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
16771 ibm8514-c|IBM 8514 color display with standout and underline,
16774 cr=\r, cud1=\n, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=\n,
16775 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, tsl=\Ej\EYI%+ \Eo,
16779 # AIX entries. IBM ships these with AIX 3.2.5.
16780 # -- added rc, sc based on manpage -TD
16781 # -- added rmacs, smacs based on manpage -TD
16782 # Note that we could use ibm+16color, but that is not how IBM defines this one.
16783 aixterm|IBM Aixterm Terminal Emulator,
16785 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16786 fsl=\E[?F, rc=\E8, ri@, rmacs=\E(B, s0ds=\E(B, s1ds=\E(0,
16788 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
16789 %t;8%;m%?%p9%t\E(0%e\E(B%;,
16790 sgr0=\E[0;10m\E(B, smacs=\E(0, tsl=\E[?%p1%dT,
16792 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
16794 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16795 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
16796 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
16797 %t;8%;m%?%p9%t\E(0%e\E(B%;,
16798 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
16799 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
16801 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
16802 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
16804 tsl=\E[?%p1%dT, use=ibm6153,
16805 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
16807 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
16809 sgr0=\E[m, smacs@, use=aixterm,
16810 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
16812 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
16814 sgr0=\E[m, smacs@, use=aixterm-m,
16816 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
16817 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
16818 use=ibm+16color, use=aixterm,
16820 #### Infoton/General Terminal Corp.
16823 # gt100 sounds like something DEC would come out with. Let's hope they don't.
16824 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
16827 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16828 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
16829 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
16830 ind=\n, rmso=\Ea, smso=\Eb,
16834 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
16835 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
16836 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
16837 il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
16838 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
16842 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y,
16843 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=\n, ll=^H^\,
16844 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
16848 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
16849 ed=^K, ind=\n, ll=^H^\,
16851 # The ICL6402 was actually the Kokusai Display System 6402.
16852 # The 6404 was the KDS7372 (color version of the 6402).
16854 # ICL6404 control codes follow:
16857 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
16858 #ctrl-A set SOM position at cursor position
16861 #ctrl-I Horizontal tab
16864 #ctrl-L Cursor right
16865 #ctrl-M Carriage return
16866 #ctrl-N Disable xon/xoff to host
16867 #ctrl-O Enable xon/xoff to host
16868 #ctrl-R Enable bidirectional mode
16869 #ctrl-T Disable bidirectional mode
16870 #ctrl-V Cursor down
16871 #ctrl-Z Clear unprotected data to insert char
16872 #ctrl-^ Cursor home
16875 #ESC lead-in char for multiple character command
16877 #ESC space R execute power on sequence
16878 #ESC ! p1 p2 define scroll region:
16879 # p1 = scroll top line: 20h - 37h
16880 # p1 = scroll bottom line: 20h - 37h
16881 #ESC " unlock keyboard
16882 #ESC # lock keyboard
16883 #ESC $ Semi-graphics mode on
16884 #ESC % Semi-graphics mode off
16885 #ESC & protect mode on
16886 #ESC ' protect mode off
16887 #ESC ( write protect mode off (full intensity)
16888 #ESC ) write protect mode on (half intensity)
16890 #ESC * clear screen
16891 #ESC + clear unprotected data to insert char
16892 #ESC , clear unprotected data to half intensity spaces
16893 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
16894 # p1 = page number 0 - 3
16895 # p2 = row 20h - 7fh
16896 # p3 = column (lo) 20h - 7fh
16897 # p4 = column (hi) 20h - 21h (only 132 col)
16898 #ESC . p1 set cursor style:
16899 # p1 = 0 invisible cursor
16900 # p1 = 1 block blinking cursor
16901 # p1 = 2 block steady cursor
16902 # p1 = 3 underline blinking cursor
16903 # p1 = 4 underline steady cursor
16904 #ESC / transmit cursor location (page, row, column)
16905 #ESC 0 p1 p2 p3 p4 program edit key:
16906 # p1 = edit key code: '@'-'S', '`'-'s'
16907 # p2 p3 p4 = program data (3 bytes)
16910 #ESC 2 clear tab at cursor
16911 #ESC 3 clear all tabs
16912 #ESC 4 send unprotect line to cursor
16913 #ESC 5 send unprotect page to cursor
16914 #ESC 6 send line to cursor
16915 #ESC 7 send page to cursor
16916 #ESC 8 n set scroll mode:
16917 # n = 0 set jump scroll
16918 # n = 1 set smooth scroll
16919 #ESC 9 n control display:
16920 # n = 0 display off
16922 #ESC : clear unprotected data to null
16923 #ESC ; clear unprotected data to insert char
16926 #ESC = p1 p2 address cursor to row, column
16927 # p1 = row 20h - 7fh
16928 # p2 = column (lo) 20h - 7fh
16929 # p3 = column (hi) 20h - 21h (only 132 col)
16930 #ESC > keyclick off
16931 #ESC ? transmit cursor location (row, column)
16933 #ESC @ copy print mode on
16934 #ESC A copy print mode off
16935 #ESC B block mode on
16936 #ESC C block mode off (conversation mode)
16937 #ESC D F set full duplex
16938 #ESC D H set half duplex
16940 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
16941 # 0 = black, 1 = red, 2 = green, 3 = yellow
16942 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
16943 #ESC G n set serial field attribute (n = 30h - 3Fh)
16944 #ESC H n full graphics mode:
16945 # n = 0 exit full graphics mode
16946 # n = 1 enter full graphics mode
16949 #ESC K forward page
16951 #ESC L unformatted page print
16952 #ESC M L move window left (132 col mode only)
16953 #ESC M R move window right (132 col mode only)
16954 #ESC N set page edit (clear line edit)
16955 #ESC O set line edit (clear page edit)
16956 #ESC P formatted page print
16957 #ESC Q character insert
16959 #ESC S send message unprotected only
16960 #ESC T erase line to insert char
16961 #ESC U set monitor mode (see ESC X, ESC u)
16963 #ESC V n select video attribute mode:
16964 # n = 0 serial field attribute mode
16965 # n = 1 parallel character attribute mode
16966 #ESC V 2 n define line attribute:
16967 # n = 0 single width single height
16968 # n = 1 single width double height
16969 # n = 2 double width single height
16970 # n = 3 double width double height
16971 #ESC V 3 n select character font:
16972 # n = 0 system font
16973 # n = 1 user defined font
16974 #ESC V 4 n select screen mode:
16975 # n = 0 page screen mode
16976 # n = 1 virtual screen mode
16977 #ESC V 5 n control mouse mode:
16978 # n = 0 disable mouse
16979 # n = 1 enable sample mode
16980 # n = 2 send mouse information
16981 # n = 3 enable request mode
16982 #ESC W character delete
16983 #ESC X clear monitor mode (see ESC U, ESC u)
16984 #ESC Y erase page to insert char
16986 #ESC Z n send user/status line:
16987 # n = 0 send user line
16988 # n = 1 send status line
16989 # n = 2 send terminal ID
16990 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
16994 # 3 = blink blank (= blank)
16996 # 5 = reverse blank
16997 # 6 = reverse blink
16998 # 7 = reverse blink blank (= reverse blank)
17000 # 9 = underline blank
17001 # : = underline blink
17002 # ; = underline blink blank
17003 # < = reverse underline
17004 # = = reverse underline blank
17005 # > = reverse underline blink
17006 # ? = reverse underline blink blank
17007 # p2, p3: f/grnd, b/grnd colour
17008 # (see ESC F for colours)
17009 # use ZZ for mono, eg.
17010 # ESC [ 0 Z Z for normal
17011 # ESC [ 4 Z Z for inverse etc.
17013 #ESC \ n set page size:
17014 # n = 1 24 lines/page
17015 # n = 2 48 lines/page
17016 # n = 3 72 lines/page
17017 # n = 4 96 lines/page
17018 #ESC ] n set Wordstar mode:
17019 # n = 0 normal (KDS7372) mode
17020 # n = 1 Wordstar mode
17022 #ESC b set foreground colour screen
17024 #ESC c n enter self-test mode:
17025 # n = 0 exit self test mode
17029 # n = 4 screen display test
17030 # n = 5 main/printer port test
17031 # n = 6 mouse port test
17032 # n = 7 graphics board test
17033 # n = 8 graphics memory test
17034 # n = 9 display all 'E'
17035 # n = : display all 'H'
17036 #ESC d set background colour screen
17038 #ESC e n program insert char (n = insert char)
17039 #ESC f text CR load user status line with 'text'
17041 #ESC g display user status line on 25th line
17042 #ESC h display system status line on 25th line
17044 #ESC j reverse linefeed
17045 #ESC k n duplex/local edit mode:
17046 # n = 0 duplex edit mode
17047 # n = 1 local edit mode
17048 #ESC l n select virtual screen:
17051 #ESC m save current config to NVRAM
17052 #ESC n p1 select display screen:
17057 #ESC o p1 p2 set characters/line and attribute:
17058 # p1 = 0 80 chars/line
17060 #ESC o p1 p2 set characters/line and attribute:
17061 # p1 = 0 80 chars/line
17062 # p1 = 1 132 chars/line
17063 # p2 = 0 single width single height
17064 # p2 = 1 single width double height
17065 # p2 = 2 double width single height
17066 # p2 = 3 double width double height
17068 #ESC q insert mode on
17069 #ESC r edit mode on
17070 #ESC s send message all
17071 #ESC t erase line to null
17072 #ESC u clear monitor mode (see ESC U, ESC X)
17073 #ESC v autopage mode on
17074 #ESC w autopage mode off
17075 #ESC x p1 p2 p3 define delimiter code...
17076 #ESC y erase page to null
17078 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
17079 # p1 = starting row
17080 # p2 = starting column
17084 #ESC { p1 p2 p3 p4 configure main port
17085 # (baud, stop bits, parity, word length)
17087 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
17088 # p1 = function key code:
17089 # '1' - ';' normal f1- f11
17090 # '<' - 'F' shifted f1 - f11
17091 # p2 = program mode:
17095 # Ctrl-Y = terminator
17096 # (use Ctrl-P to escape ^P, ^Y )
17098 #ESC } p1 p2 p3 p4 configure printer port
17099 # (baud, stop bits, parity, word length)
17100 #ESC ~ send system status
17102 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
17104 # Entry is by esr going solely on above information and is UNTESTED.
17105 # This actually looks a lot like a Televideo 9xx.
17106 # This entry uses page 0 and is monochrome; I'm not brave enough to try
17107 # to make color work without a test terminal. The <am> capability is a guess.
17108 # The initialization string sets conversation mode, blinking underline cursor,
17109 # full duplex, parallel attribute mode, display user status line, white
17110 # foreground, black background, normal highlight.
17112 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
17115 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
17116 cnorm=\E.3, cr=\r, csr=\E!%+%p1%{32}%+%p2%{32}, cub1=^H,
17118 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
17119 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
17120 hts=\E1, il1=\EE, invis=\E[1ZZ,
17121 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
17122 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
17123 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
17124 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
17125 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
17126 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
17127 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
17128 rs2=\Eo1, use=icl6404,
17130 #### Interactive Systems Corp
17132 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
17133 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
17134 # bought out by Sun.
17137 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
17138 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
17139 # ":le=^_:" later overridden -- esr)
17140 intext|Interactive Systems Corporation modified owl 1200,
17142 cols#80, it#8, lines#24, xmc#1,
17143 bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n,
17144 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
17145 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
17146 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H,
17147 kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
17148 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
17149 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
17150 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
17152 intext2|intextii|INTERACTIVE modified owl 1251,
17154 cols#80, lines#24, xmc#0,
17155 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=\E[D,
17156 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17157 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
17158 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
17159 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
17160 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
17161 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
17162 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
17163 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
17164 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
17165 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
17168 #### Kimtron (abm, kt)
17170 # Kimtron seems to be history, but as March 1998 these people are still
17171 # offering repair services for Kimtron equipment:
17173 # Com/Pair Monitor Service
17174 # 1105 N. Cliff Ave.
17175 # Sioux Falls, South Dakota 57103
17177 # WATS voice: 1-800/398-4946
17178 # POTS fax: +1 605/338-8709
17179 # POTS voice: +1 605/338-9650
17180 # Email: <compair@sd.cybernex.net>
17181 # Internet/Web: <http://www.com-pair.com>
17183 # Kimtron entries include (undocumented) codes for: enter dim mode,
17184 # enter bold mode, enter reverse mode, turn off all attributes.
17187 # Kimtron ABM 85 added by Dual Systems
17188 # (abm85: removed duplicated ":kd=^J:" -- esr)
17189 abm85|Kimtron ABM 85,
17190 OTbs, am, bw, msgr,
17191 cols#80, it#8, lines#24, xmc#1,
17192 cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L,
17193 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17194 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
17195 if=/usr/share/tabset/stdcrt, il1=\EE,
17196 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
17197 kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
17198 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
17199 # Kimtron ABM 85H added by Dual Systems.
17200 # Some notes about the abm85h entries:
17201 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
17202 # firmware revs prior to SP51
17203 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
17204 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
17205 # in some places and NOT software settable i.e., <is2> can't fix it)
17206 # 3) In 85h mode, the arrow keys and special functions transmit when
17207 # the terminal is in dup-edit, and work only locally in local-edit.
17208 # Vi won't swallow `del char' for instance, but <smcup> turns on
17209 # dup-edit anyway so that the arrow keys will work right. If the
17210 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
17211 # <is2>. Note that 920E mode does not have software commands to toggle
17212 # between dup and local edit, so you get whatever was set last on the
17214 # 4) <flash> attribute is nice, but seems too slow to work correctly
17216 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
17217 # are selected, the <xmc@> entry should be removed.
17218 # 6) auto new-line should be on (selectable from setup mode only)
17220 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
17221 abm85h|Kimtron ABM 85H native mode,
17224 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
17226 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
17228 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
17230 abm85e|Kimtron ABM 85H in 920E mode,
17232 bel=^G, dim=\E), flash@,
17233 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
17235 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
17236 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
17239 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
17241 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
17242 # From: <malman@bbn-vax.arpa>
17243 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
17244 kt7|kimtron model kt-7,
17246 cols#80, it#8, lines#24,
17247 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
17248 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17249 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
17250 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
17251 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
17252 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
17253 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
17254 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
17255 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
17256 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
17257 # other kt7 entry and the adjacent key capabilities). Removed EE which is
17258 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
17259 # but we can't figure out what.
17260 kt7ix|kimtron model kt-7 or 70 in IX mode,
17262 cols#80, it#8, lines#25,
17263 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
17264 civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V,
17265 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17266 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r,
17267 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n,
17268 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
17269 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
17270 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
17271 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17272 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
17273 nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
17274 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
17276 #### Microdata/MDIS
17278 # This was a line of terminals made by McDonnell-Douglas Information Systems.
17279 # These entries come direct from MDIS documentation. I have edited them only
17280 # to move primary names of the form p[0-9] * to aliases, and to comment out
17281 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
17282 # also removed the change history; the last version indicates this is
17283 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
17286 # McDonnell Information Systems Terminal Family History
17287 # =========================================
17289 # Prism-1, Prism-2 and P99:
17290 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
17292 # Prism-4 and Prism-5:
17293 # Slightly less ancient range of Microdata terminals. Follow-on from
17294 # Prism-2, but with many enhancements. P5 has eight display pages.
17297 # A special terminal for use with library systems, primarily in Germany.
17298 # Limited numbers. Similar functionality to P5 (except attributes?).
17300 # Prism-7, Prism-8 and Prism-9:
17301 # More recent range of MDIS terminals, in which P7 and P8
17302 # replace the P4 & P5, with added functionality, and P9 is the flagship.
17303 # The P9 has two emulation modes - P8 and ANSI - and includes a
17304 # large number of the DEC VT220 control sequences. Both
17305 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
17307 # Prism-12 and Prism-14:
17308 # Latest range, functionally very similar to the P9. The P14 has a
17309 # black-on-white overscanning screen.
17311 # The terminfo definitions given here are:
17313 # p2 - Prism-2 (or Prism-1 or P99).
17315 # p4 - Prism-4 (and older P7s & P8s).
17316 # p5 - Prism-5 (or Prism-6).
17319 # p8 - Prism-8 (in national or multinational mode).
17320 # p8-w - 132 column version of p8.
17321 # p9 - Prism-9 in ANSI mode.
17322 # p9-w - 132 column version of p9.
17323 # p9-8 - Prism-9 in Prism-8 emulation mode.
17324 # p9-8-w - As p9-8, but with 132 columns.
17326 # p12 - Prism-12 in ANSI mode.
17327 # p12-w - 132 column version of p12.
17328 # p12-m - Prism-12 in MDC emulation mode.
17329 # p12-m-w - As p12-m, but with 132 columns.
17330 # p14 - Prism-14 in ANSI mode.
17331 # p14-w - 132 column version of p14.
17332 # p14-m - Prism-14 in MDC emulation mode.
17333 # p14-m-w - As p14-m, but with 132 columns.
17338 # Includes Prism-1 and basic P99 without SP or MP loaded.
17339 # The simplest form of Prism-type terminal.
17340 # Basic cursor movement and clearing operations only.
17341 # No video attributes.
17343 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
17344 # value up, followed by backspace.
17346 prism2|MDC Prism-2,
17349 bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
17350 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
17351 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17352 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
17353 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
17354 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17355 ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
17360 # Includes early versions of P7 & P8.
17361 # Basic family definition for most Prisms (except P2 and P9 ANSI).
17363 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
17364 # value up, followed by backspace.
17365 # Cursor key definitions removed because they interfere with vi and csh keys.
17367 prism4|p4|P4|MDC Prism-4,
17368 am, bw, hs, mc5i, msgr,
17369 cols#80, lines#24, wsl#72, xmc#1,
17370 bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>,
17371 cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
17372 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
17373 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17374 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
17375 fsl=\035\345, home=^A,
17376 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
17377 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
17378 ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
17379 rev=^CD, rmso=^C\s, rmul=^C\s,
17380 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
17381 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
17382 sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343,
17383 vpa=\013%p1%{32}%+%c,
17388 # Same definition as p4. Includes Prism-6 (not tested!).
17389 # Does not use any multi-page features.
17391 prism5|p5|P5|MDC Prism-5,
17397 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
17399 # Use p4 for very early models of P7.
17400 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17402 prism7|p7|P7|MDC Prism-7,
17403 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
17408 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
17409 # Supports national and multinational character sets.
17411 # Alternate char set operations only work in multinational mode.
17412 # Use p4 for very early models of P8.
17413 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17414 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
17416 prism8|p8|P8|MDC Prism-8,
17417 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
17418 vpa=\E[%i%p1%dd, use=p4,
17420 # p8-w: Prism-8 in 132 column mode
17421 # --------------------------------
17423 # 'Wide' version of p8.
17425 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
17427 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
17429 is2=\E[<12h\E[<14h, use=p8,
17431 # p9: Prism-9 in ANSI mode
17432 # -------------------------
17434 # The "flagship" model of this generation of terminals.
17435 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
17437 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
17438 # Fixes to deal with terminal firmware bugs:
17439 # . 'ri' uses insert-line since rev index doesn't always
17440 # . 'sgr0' has extra '0' since esc[m fails
17441 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
17442 # Not covered in the current definition:
17444 # . Programming Fn keys
17445 # . Graphic characters (defaults correctly to vt100)
17446 # . Padding values (sets xon)
17447 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
17449 prism9|p9|P9|MDC Prism-9 in ANSII mode,
17450 am, bw, hs, msgr, xenl, xon,
17451 cols#80, it#8, lines#24, vt#3, wsl#72,
17452 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
17453 clear=^L, cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v,
17454 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
17455 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
17456 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
17457 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
17458 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
17459 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
17460 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
17461 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
17462 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
17463 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
17464 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
17465 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
17466 khome=\E[H, nel=\r\n, prot=\E[32%{, rc=\E[%z,
17467 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
17468 rmso=\E[27m, rmul=\E[24m,
17469 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
17472 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
17473 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
17474 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
17475 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
17478 # p9-w: Prism-9 in 132 column mode
17479 # --------------------------------
17481 # 'Wide' version of p9.
17483 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
17485 is2=\E[&p\E[<12l\E F\E[<14h,
17486 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
17488 # p9-8: Prism-9 in P8 mode
17489 # ------------------------
17491 # P9 terminal in P8 emulation mode.
17492 # Similar to p8 definition.
17493 # Insertion and deletion operations possible.
17495 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
17496 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17497 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
17499 # p9-8-w: Prism-9 in P8 and 132 column modes
17500 # ------------------------------------------
17502 # P9 terminal in P8 emulation mode and 132 column mode.
17504 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
17505 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
17506 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
17508 # p12: Prism-12 in ANSI mode
17509 # ---------------------------
17511 # See p9 definition.
17513 prism12|p12|P12|MDC Prism-12 in ANSI mode,
17516 # p12-w: Prism-12 in 132 column mode
17517 # ----------------------------------
17519 # 'Wide' version of p12.
17521 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
17524 # p12-m: Prism-12 in MDC emulation mode
17525 # -------------------------------------
17527 # P12 terminal in MDC emulation mode.
17528 # Similar to p8 definition.
17529 # Insertion and deletion operations possible.
17531 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
17534 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
17535 # -------------------------------------------------------
17537 # P12 terminal in MDC emulation mode and 132 column mode.
17539 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
17542 # p14: Prism-14 in ANSII mode
17543 # ---------------------------
17545 # See p9 definition.
17547 prism14|p14|P14|MDC Prism-14 in ANSII mode,
17550 # p14-w: Prism-14 in 132 column mode
17551 # ----------------------------------
17553 # 'Wide' version of p14.
17555 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
17558 # p14-m: Prism-14 in MDC emulation mode
17559 # -------------------------------------
17561 # P14 terminal in MDC emulation mode.
17562 # Similar to p8 definition.
17563 # Insertion and deletion operations possible.
17565 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
17568 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
17569 # -------------------------------------------------------
17571 # P14 terminal in MDC emulation mode and 132 column mode.
17573 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
17576 # End of McDonnell Information Systems Prism definitions
17578 # These things were popular in the Pick database community at one time
17579 # From: George Land <georgeland@aol.com> 24 Sep 1996
17580 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
17582 cols#80, lines#24, ma#1, wsl#78, xmc#1,
17583 bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F,
17584 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
17585 ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U,
17586 kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
17587 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
17588 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
17589 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17590 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
17591 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r,
17592 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
17595 #### Microterm (act, mime)
17597 # The mime1 entries refer to the Microterm Mime I or Mime II.
17598 # The default mime is assumed to be in enhanced act iv mode.
17601 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
17602 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
17603 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
17604 # since Sytek insists ^S means xoff.
17605 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
17606 act4|microterm|microterm act iv,
17609 bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X,
17610 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
17611 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
17612 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
17613 il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X,
17615 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
17616 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
17617 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
17618 act5|microterm5|microterm act v,
17619 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
17621 # Mimes using brightness for standout. Half bright is really dim unless
17622 # you turn up the brightness so far that lines show up on the screen.
17623 mime-fb|full bright mime1,
17624 is2=^S\E, rmso=^S, smso=^Y, use=mime,
17625 mime-hb|half bright mime1,
17626 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
17627 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
17628 # the more plausible ":do=^J:" -- esr)
17629 # uc was at one time disabled to get around a curses bug, be wary of it
17630 mime|mime1|mime2|mimei|mimeii|microterm mime1,
17632 cols#80, it#8, lines#24, vt#9,
17633 bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X,
17634 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
17635 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
17636 il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K,
17637 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
17638 # These termcaps (for mime2a) put the terminal in low intensity mode
17639 # since high intensity mode is so obnoxious.
17640 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
17643 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17644 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
17645 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
17646 il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n,
17647 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
17648 smir=\EE, smso=\E\:, smul=\E6,
17649 # This is the preferred mode (but ^X can't be used as a kill character)
17650 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
17652 cols#80, it#8, lines#24,
17653 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17654 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
17655 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
17656 il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, kcub1=\ED,
17657 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
17658 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
17659 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
17660 mime3a|mime1 emulating 3a,
17662 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
17663 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
17665 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
17667 # Wed Mar 9 18:53:21 1983
17668 # We run our terminals at 2400 baud, so there might be some timing problems at
17669 # higher speeds. The major improvements in this model are the terminal now
17670 # scrolls down and insert mode works without redrawing the rest of the line
17671 # to the right of the cursor. This is done with a bit of a kludge using the
17672 # exit graphics mode to get out of insert, but it does not appear to hurt
17673 # anything when using vi at least. If you have some users using act4s with
17674 # programs that use curses and graphics mode this could be a problem.
17675 mime314|mm314|mime 314,
17678 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
17679 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
17680 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
17681 # Microterm mime 340 from University of Wisconsin
17682 mm340|mime340|mime 340,
17684 clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17685 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17686 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
17687 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,,
17688 kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n,
17689 # This came from University of Wisconsin marked "astro termcap for jooss".
17690 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
17691 # also added <rmam>/<smam> based on the init string -- esr)
17692 mt4520-rv|micro-term 4520 reverse video,
17693 am, hs, msgr, xenl, xon,
17694 cols#80, it#8, lines#24, wsl#80,
17695 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=\r,
17696 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17697 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17698 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17699 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
17700 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
17701 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
17702 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
17703 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
17705 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17706 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
17707 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
17708 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
17709 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
17710 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
17711 tbc=\E[g, tsl=\E[25;1H,
17713 # Fri Aug 5 08:11:57 1983
17714 # This entry works for the ergo 4000 with the following setups:
17715 # ansi,wraparound,newline disabled, xon/xoff disabled in both
17718 # WARNING!!! There are multiple versions of ERGO 4000 microcode
17719 # Be advised that very early versions DO NOT WORK RIGHT !!
17720 # Microterm does have a ROM exchange program- use it or lose big
17721 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
17722 ergo4000|microterm ergo 4000,
17725 bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H, cud1=\E[B,
17726 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17727 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
17728 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
17729 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
17730 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
17731 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
17732 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
17733 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
17734 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
17739 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
17740 # For what happened to that group, see the ADDS section.
17742 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
17745 # The following vendor-supplied termcaps were captured from the Boundless
17746 # Technologies site, 8 March 1998. I removed all-upper-case names that were
17747 # identical, except for case, to lower-case ones. I also uncommented the acsc
17750 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17751 # DEC vt200/300 with color capabilities added.
17752 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17753 colors#8, pairs#64,
17754 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17756 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17757 # DEC vt200/300 with color capabilities added.
17758 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17759 colors#8, pairs#64,
17760 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17761 use=ncr260vt300wan,
17762 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17763 # DEC vt200/300 with color capabilities added.
17764 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
17765 colors#8, pairs#64,
17766 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17768 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17769 # DEC vt200/300 with color capabilities added.
17770 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
17771 colors#8, pairs#64,
17772 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17773 use=ncr260vt300wpp,
17774 # This definition for ViewPoint supports several attributes. This means
17775 # that it has magic cookies (extra spaces where the attributes begin).
17776 # Some applications do not function well with magic cookies. The System
17777 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17778 # If supporting various attributes is not vital, 'xmc#1' and the extra
17779 # attributes can be removed.
17780 # Mapping to ASCII character set ('acsc' capability) can also be
17781 # restored if needed.
17782 ncr260vppp|NCR 2900_260 viewpoint,
17783 am, bw, hs, km, mc5i, mir, msgr, xon,
17784 cols#80, lines#24, nlab#32, xmc#1,
17785 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17786 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
17787 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
17788 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
17789 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
17790 el=\EK$<2>, fsl=\r, home=\036$<2>, ht=^I, hts=\E1,
17791 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
17792 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17794 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
17795 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F,
17796 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=\002\:\r,
17797 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
17798 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
17799 kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r,
17800 kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r,
17801 kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r,
17802 kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
17803 kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP,
17804 ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
17805 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
17806 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
17807 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17808 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17810 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
17811 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
17812 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
17814 cup=\Ea%i%p1%dR%p2%dC$<30>,
17815 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17817 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17820 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
17821 am, hs, mir, msgr, xenl, xon,
17822 cols#80, lines#24, nlab#32,
17823 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17824 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17825 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17826 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
17827 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17828 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17829 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17830 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17831 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17832 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
17833 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
17834 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
17835 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
17837 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17839 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17840 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
17841 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
17842 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
17843 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
17844 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17847 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17848 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17849 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
17850 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
17851 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
17852 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
17854 cup=\E[%i%p1%d;%p2%dH$<30>,
17855 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17857 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17860 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
17861 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17863 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17864 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17865 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
17866 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
17867 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17869 smkx=\E=, use=ncr260vt100an,
17870 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
17872 cup=\E[%i%p1%d;%p2%dH$<30>,
17873 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17875 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17878 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
17879 am, hs, mir, msgr, xenl, xon,
17880 cols#80, lines#24, nlab#32,
17881 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17882 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17883 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17884 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
17885 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17886 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17887 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17888 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17889 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17890 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
17891 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
17892 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
17893 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
17894 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17896 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17897 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
17898 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
17899 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
17900 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
17901 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
17902 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
17903 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
17904 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
17905 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
17906 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
17907 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
17908 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
17909 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
17910 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17913 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17914 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17915 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
17916 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17917 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
17919 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
17921 cup=\E[%i%p1%d;%p2%dH$<30>,
17922 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
17923 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
17924 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
17925 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17926 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17927 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17928 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
17930 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
17932 cup=\E[%i%p1%d;%p2%dH$<30>,
17933 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17935 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17938 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
17939 am, hs, mir, msgr, xenl, xon,
17940 cols#80, lines#24, nlab#32,
17941 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17942 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17943 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17944 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
17945 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17946 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17947 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17948 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17949 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17950 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
17951 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
17952 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
17953 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
17954 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17956 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17957 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
17958 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
17959 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
17960 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
17961 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
17962 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
17963 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
17964 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
17965 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17966 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
17967 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
17968 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
17970 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17973 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17974 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17975 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
17976 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17977 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
17979 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
17981 cup=\E[%i%p1%d;%p2%dH$<30>,
17982 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
17984 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
17987 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
17988 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17989 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17990 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17991 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
17993 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
17995 cup=\E[%i%p1%d;%p2%dH$<30>,
17996 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17998 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
18001 # This terminfo file contains color capabilities for the Wyse325 emulation of
18002 # the NCR 2900/260C color terminal. Because of the structure of the command
18003 # (escape sequence) used to set color attributes, one of the fore/background
18004 # colors must be preset to a given value. I have set the background color to
18005 # black. The user can change this setup by altering the last section of the
18006 # 'setf' definition. The escape sequence to set color attributes is
18007 # ESC d y <foreground_color> <background_color> 1
18008 # In addition, the background color can be changed through the desk accessories.
18009 # The capability 'op' sets colors to green on black (default combination).
18011 # NOTE: The NCR Unix System Administrator's Shell will not function properly
18012 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
18013 # capability and recompile if you wish to have it included.
18015 ncr260wy325pp|NCR 2900_260 wyse 325,
18016 am, bw, hs, km, mc5i, mir, msgr, xon,
18017 colors#16, cols#80, lines#24, ncv#33, nlab#32,
18018 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18019 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r,
18020 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18021 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
18022 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
18023 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<5>, ht=^I,
18024 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
18025 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18027 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
18028 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
18029 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
18030 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
18031 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
18032 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
18033 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
18034 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
18035 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
18036 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
18037 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
18038 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
18039 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
18040 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18041 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18044 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
18045 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
18046 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
18047 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
18048 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
18049 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
18050 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
18051 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
18053 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
18055 cup=\Ea%i%p1%dR%p2%dC$<30>,
18056 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18058 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18061 # This definition for Wyse 350 supports several attributes. This means
18062 # that it has magic cookies (extra spaces where the attributes begin).
18063 # Some applications do not function well with magic cookies. The System
18064 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
18065 # If supporting various attributes is not vital, 'xmc#1' and the extra
18066 # attributes can be removed.
18067 # Mapping to ASCII character set ('acsc' capability) can also be
18068 # restored if needed.
18069 # In addition, color capabilities have been added to this file. The drawback,
18070 # however, is that the background color has to be black. The foreground colors
18071 # are numbered 0 through 15.
18073 # NOTE: The NCR Unix System Administrator's Shell does not function properly
18074 # with the 'pairs' capability defined as below. If you wish to
18075 # have it included, Un-comment it and recompile (using 'tic').
18077 ncr260wy350pp|NCR 2900_260 wyse 350,
18078 am, bw, hs, km, mc5i, mir, msgr, xon,
18079 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
18080 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18081 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
18082 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18083 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
18084 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
18085 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<10>, ht=^I,
18086 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
18087 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18089 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
18090 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
18091 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
18092 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
18093 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
18094 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
18095 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
18096 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
18097 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
18098 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
18099 mc0=\EP$<10>, mc4=^T, mc5=^R,
18100 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
18101 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
18102 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18103 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
18106 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
18107 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
18108 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
18109 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
18110 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
18111 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
18112 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
18113 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
18115 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
18117 cup=\Ea%i%p1%dR%p2%dC$<30>,
18118 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18120 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
18123 # This definition for Wyse 50+ supports several attributes. This means
18124 # that it has magic cookies (extra spaces where the attributes begin).
18125 # Some applications do not function well with magic cookies. The System
18126 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
18127 # If supporting various attributes is not vital, 'xmc#1' and the extra
18128 # attributes can be removed.
18129 # Mapping to ASCII character set ('acsc' capability) can also be
18130 # restored if needed.
18131 # (ncr260wy50+pp: originally contained commented-out
18132 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
18133 ncr260wy50+pp|NCR 2900_260 wyse 50+,
18134 am, bw, hs, km, mc5i, mir, msgr, xon,
18135 cols#80, lines#24, nlab#32, xmc#1,
18136 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
18137 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
18138 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18139 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
18140 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
18141 ed=\EY$<5>, el=\ET$<5>, fsl=\r, home=\036$<10>,
18142 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
18144 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18145 \Ee4\Ex@\E`9\Ee7$<100>,
18146 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
18147 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
18148 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
18149 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
18150 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
18151 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
18152 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
18153 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
18154 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
18155 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
18156 mc0=\EP$<10>, mc4=^T, mc5=^R,
18157 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
18158 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
18159 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18160 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18161 \Ee4\Ex@\E`9\Ee7$<100>,
18162 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
18163 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
18164 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
18166 cup=\Ea%i%p1%dR%p2%dC$<30>,
18167 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18168 \Ee4\Ex@\E`9\Ee7$<200>,
18169 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18170 \Ee4\Ex@\E`9\Ee7$<200>,
18172 ncr260wy60pp|NCR 2900_260 wyse 60,
18173 am, bw, hs, km, mc5i, mir, msgr, xon,
18174 cols#80, lines#24, nlab#32,
18175 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
18176 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
18177 cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
18178 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
18179 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
18180 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<25>,
18181 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
18183 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18184 \Ee4\Ex@\E`9\Ee7$<100>,
18185 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
18186 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
18187 kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
18188 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
18189 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
18190 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
18191 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
18192 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
18193 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
18194 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18195 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
18196 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
18197 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
18198 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
18199 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
18200 \Ee4\Ex@\E`9\Ee7$<100>,
18201 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
18202 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
18204 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
18206 cup=\Ea%i%p1%dR%p2%dC$<30>,
18207 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18208 \Ee4\Ex@\E`9\Ee7$<100>,
18209 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
18210 \Ee4\Ex@\E`9\Ee7$<100>,
18212 ncr160vppp|NCR 2900_160 viewpoint,
18214 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
18216 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
18218 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
18220 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
18221 use=ncr260vt100wan,
18222 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
18223 use=ncr260vt100wpp,
18224 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
18226 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
18228 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
18229 use=ncr260vt200wan,
18230 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
18231 use=ncr260vt200wpp,
18232 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
18234 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
18236 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
18237 use=ncr260vt300wan,
18238 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
18239 use=ncr260vt300wpp,
18240 ncr160wy50+pp|NCR 2900_160 wyse 50+,
18242 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
18243 use=ncr260wy50+wpp,
18244 ncr160wy60pp|NCR 2900_160 wyse 60,
18246 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
18248 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
18249 am, hs, mc5i, mir, msgr, xon,
18250 cols#80, it#8, lines#24, nlab#32,
18251 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
18252 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
18253 clear=\E[2J\E[1;1H$<300>, cr=\r,
18254 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
18255 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
18256 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
18257 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
18258 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
18259 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
18260 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
18261 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
18262 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
18264 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
18265 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
18266 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\r, kf1=\EOP,
18267 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
18268 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
18269 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
18270 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
18271 B\E)0\E%/0n\E[P\031$<200>,
18273 sgr=%?%p9%t\016%e\017%;\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1
18274 %p3%|%t;7%;%?%p4%t;5%;m$<100>,
18275 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
18276 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
18278 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
18280 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
18281 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
18282 \E)0\E%/0n\E[P\031$<200>,
18285 # Vendor-supplied NCR termcaps end here
18287 # NCR7900 DIP switches:
18291 # 5 - Parity (Odd/Even)
18292 # 6 - Don't Send or Do Send Spaces
18293 # 7 - Parity Enable
18294 # 8 - Stop Bits (One/Two)
18297 # 1 - Upper/Lower Shift
18298 # 2 - Typewriter Shift
18299 # 3 - Half Duplex / Full Duplex
18300 # 4 - Light/Dark Background
18301 # 5-6 - Carriage Return Without / With Line Feed
18302 # 7 - Extended Mode
18303 # 8 - Suppress Keyboard Display
18306 # 1 - End of line entry disabled/enabled
18307 # 2 - Conversational mode / (Local?) Mode
18308 # 3 - Control characters displayed / not displayed
18309 # 4 - (2-wire?) / 4-wire communications
18310 # 5 - RTS on and off for each character
18311 # 6 - (50Hz?) / 60 Hz
18312 # 7 - Exit after level zero diagnostics
18313 # 8 - RS-232 interface
18316 # 1 - Reverse Channel (yes / no)
18317 # 2 - Manual answer (no / yes)
18318 # 3-4 - Cursor appearance
18319 # 5 - Communication Rate
18320 # 6 - Enable / Disable EXT turnoff
18321 # 7 - Enable / Disable CR turnoff
18322 # 8 - Enable / Disable backspace
18324 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
18325 # reverse, blink, dim, and underline) the appropriate number of bits (by
18326 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
18327 # '@' is (effectively) "or"ed with each attribute to generate the proper third
18328 # character in the <ESC>0 sequence. The <sgr> string implements the following
18331 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
18332 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
18334 # Where: P1 <==> Standout attribute parameter
18335 # P2 <==> Underline attribute parameter
18336 # P3 <==> Reverse attribute parameter
18337 # P4 <==> Blink attribute parameter
18338 # P5 <==> Dim attribute parameter
18339 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
18340 ncr7900i|ncr7900|ncr 7900 model 1,
18342 cols#80, lines#24, xmc#1,
18343 bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
18344 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n,
18345 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F,
18346 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
18348 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
18350 sgr0=\E0@, smso=\E0Q, smul=\E0`,
18351 ncr7900iv|ncr 7900 model 4,
18354 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
18355 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
18356 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H,
18357 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
18358 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
18359 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n,
18360 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
18361 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
18362 # The user can enter a CTRL-B to get out of this locked state.
18363 # In <hpa>, we want to output the character given by the formula:
18364 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
18365 ncr7901|ncr 7901 model,
18368 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
18369 cub1=^H, cud1=\n, cuf1=^F,
18370 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
18372 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n,
18373 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
18374 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
18375 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
18377 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
18378 vpa=\013%p1%{64}%+%c,
18380 # Newbury Data Recording Limited (Newbury Data)
18382 # Have been manufacturing and reselling various peripherals for a long time
18383 # They don't make terminals anymore, but are still in business (in 2007).
18384 # Their e-mail address is at ndsales@newburydata.co.uk
18385 # and their post address is:
18387 # Newbury Data Recording Ltd,
18388 # Premier Park, Road One,
18389 # Winsford, Cheshire, CW7 3PT
18391 # Their technical support is still good, they sent me for free a printed copy
18392 # of the 9500 user manual and I got it just 1 week after I first contacted them
18396 # Manufactured in the early/mid eighties, behaves almost the same as a
18397 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
18398 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
18399 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
18400 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
18401 # recognized: if you type in "ESC !", the next (third) character is not
18402 # echoed, showing that the terminal was actually waiting for a parameter!
18403 ndr9500|nd9500|Newbury Data 9500,
18404 am, bw, hs, mc5i, mir, msgr, ul, xon,
18405 cols#80, lines#24, wsl#79,
18406 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
18407 clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
18408 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
18409 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
18410 flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
18411 ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO,
18412 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
18413 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
18414 ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
18415 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
18416 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
18417 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
18418 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
18419 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
18420 pfloc=\E|%{48}%p1%+%c2%p2\031,
18421 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
18422 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
18423 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
18424 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
18425 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
18427 ndr9500-nl|NDR 9500 with no status line,
18430 dsl@, fsl@, tsl@, use=ndr9500,
18432 ndr9500-25|NDR 9500 with 25th line enabled,
18433 lines#25, use=ndr9500,
18435 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
18436 lines#25, use=ndr9500-nl,
18438 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
18441 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
18442 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
18443 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
18444 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
18446 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
18447 lines#25, use=ndr9500-mc,
18449 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
18452 dsl@, fsl@, tsl@, use=ndr9500-mc,
18454 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
18455 lines#25, use=ndr9500-mc-nl,
18457 #### Perkin-Elmer (Owl)
18459 # These are official terminfo entries from within Perkin-Elmer.
18462 bantam|pe550|pe6100|perkin elmer 550,
18465 bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
18466 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18467 el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
18468 fox|pe1100|perkin elmer 1100,
18471 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
18472 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18473 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
18474 home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
18475 owl|pe1200|perkin elmer 1200,
18478 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
18479 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18480 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
18481 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
18482 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
18483 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
18484 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
18485 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
18486 pe1251|pe6300|pe6312|perkin elmer 1251,
18488 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
18489 bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
18490 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
18491 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n,
18492 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
18493 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
18494 # (pe7000m: this had
18495 # rmul=\E!\0, smul=\E!\040,
18496 # which is probably wrong, it collides with kf0
18497 pe7000m|perkin elmer 7000 series monochrome monitor,
18500 bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
18501 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
18502 ed=\EJ, el=\EI, home=\EH, ind=\n,
18503 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
18504 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
18505 kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
18506 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
18508 pe7000c|perkin elmer 7000 series colour monitor,
18509 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
18510 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
18514 # Sperry Univac has merged with Burroughs to form Unisys.
18517 # This entry is for the Sperry UTS30 terminal running the TTY
18518 # utility under control of CP/M Plus 1R1. The functionality
18519 # provided is comparable to the DEC vt100.
18520 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
18521 uts30|sperry uts30 with cp/m@1R1,
18523 cols#80, lines#24, wsl#40,
18524 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18525 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
18526 cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
18527 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18528 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18529 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
18530 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r, home=\E[H,
18531 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
18532 ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
18533 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
18534 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
18535 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
18536 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
18537 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
18538 smul=\E[4m, tsl=\E], uc=\EPB,
18542 # Tandem builds these things for use with its line of fault-tolerant
18543 # transaction-processing computers. They aren't generally available
18544 # on the merchant market, and so are fairly uncommon.
18547 tandem6510|adm3a repackaged by Tandem,
18550 # A funny series of terminal that TANDEM uses. The actual model numbers
18551 # have a fourth digit after 653 that designates minor variants. These are
18552 # natively block-mode and rather ugly, but they have a character mode which
18553 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
18554 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
18555 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
18556 tandem653|t653x|Tandem 653x multipage terminal,
18557 OTbs, am, da, db, hs,
18558 cols#80, lines#24, wsl#64, xmc#1,
18559 clear=\EI, cub1=^H, cud1=\n, cuf1=\EC,
18560 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
18561 ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
18562 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
18564 #### Tandy/Radio Shack
18566 # Tandy has a line of VDTs distinct from its microcomputers.
18569 dmterm|deskmate terminal,
18572 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H,
18573 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18574 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
18575 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
18576 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
18577 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
18578 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
18579 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
18581 dt100|dt-100|Tandy DT-100 terminal,
18583 cols#80, lines#24, xmc#1,
18584 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18585 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
18586 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18587 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
18588 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
18589 il1=\E[L, ind=\n, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
18590 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
18591 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
18592 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
18593 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
18594 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
18595 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
18596 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
18597 cols#132, use=dt100,
18598 dt110|Tandy DT-110 emulating ansi,
18601 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18602 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
18603 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18604 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
18605 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
18606 ht=^I, ich1=\E[0@, il1=\E[0L, ind=\n, is2=\E[?3l\E)0\E(B,
18607 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
18608 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
18609 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
18610 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
18611 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
18612 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
18613 smacs=^N, smso=\E[7m, smul=\E[4m,
18614 pt210|TRS-80 PT-210 printing terminal,
18617 bel=^G, cr=\r, cud1=\n, ind=\n,
18619 #### Tektronix (tek)
18621 # Tektronix tubes are graphics terminals. Most of them use modified
18622 # oscilloscope technology incorporating a long-persistence green phosphor,
18623 # and support vector graphics on a main screen with an attached "dialogue
18624 # area" for interactive text.
18627 tek|tek4012|tektronix 4012,
18630 bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
18631 ff=\014$<1000>, is2=\E^O,
18632 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18633 tek4013|tektronix 4013,
18634 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
18635 tek4014|tektronix 4014,
18637 is2=\E\017\E9, use=tek4012,
18638 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18639 tek4015|tektronix 4015,
18640 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
18641 tek4014-sm|tektronix 4014 in small font,
18642 cols#121, lines#58,
18643 is2=\E\017\E\:, use=tek4014,
18644 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18645 tek4015-sm|tektronix 4015 in small font,
18646 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
18647 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
18649 # You need to have "stty nl2" in effect. Some versions of tset(1) know
18650 # how to set it for you.
18652 # It's got the Magic Cookie problem around stand-out mode. If you can't
18653 # live with Magic Cookie, remove the :so: and :se: fields and do without
18654 # reverse video. If you like reverse video stand-out mode but don't want
18655 # it to flash, change the letter 'H' to 'P' in the :so: field.
18656 tek4023|tektronix 4023,
18658 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
18659 OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
18660 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
18661 rmso=^_@, smso=^_P,
18662 # It is recommended that you run the 4025 at 4800 baud or less;
18663 # various bugs in the terminal appear at 9600. It wedges at the
18664 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
18665 # on keyboard don't work. You have to hit BREAK twice to get
18666 # one break at any speed - this is a documented feature.
18667 # Can't use cursor motion because it's memory relative, and
18668 # because it only works in the workspace, not the monitor.
18669 # Same for home. Likewise, standout only works in the workspace.
18671 # <el> was commented out since vi and rogue seem to work better
18672 # simulating it with lots of spaces!
18674 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
18675 # and didn't seem necessary.
18677 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
18679 cols#80, it#8, lines#34, lm#0,
18680 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
18681 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
18682 cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
18683 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
18684 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
18685 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
18686 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
18688 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18689 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
18691 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
18692 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
18693 tek4025-17|tek 4025 17 line window,
18694 lines#17, use=tek4025,
18695 tek4025-17-ws|tek 4025 17 line window in workspace,
18696 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
18697 \r\037wor\s17\r\037mon\s17\r,
18698 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
18699 smso=\037att e\r, use=tek4025-17,
18700 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
18701 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
18702 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18704 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
18705 # The following status modes are assumed for normal operation (replace the
18706 # initial "!" by whatever the current command character is):
18707 # !COM 29 # NOTE: changes command character to GS (^])
18713 # ^]STO 9 17 25 33 41 49 57 65 73
18714 # Other modes may be set according to communication requirements.
18715 # If the command character is inadvertently changed, termcap can't restore it.
18716 # Insert-character cannot be made to work on both top and bottom rows.
18717 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
18718 # There also seems to be a problem with vertical motion, perhaps involving
18719 # delete/insert-line, following a typed carriage return. This terminal sucks.
18720 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18721 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
18722 # work any more. -- esr)
18723 tek4025a|Tektronix 4025A,
18724 OTbs, OTpt, am, bw, da, db, xon,
18725 cols#80, it#8, lines#34,
18726 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
18727 cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
18728 cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;,
18729 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
18730 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
18731 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
18732 il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;,
18733 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
18734 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
18735 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
18736 \s33\s41\s49\s57\s65\s73\035wor\s0;,
18738 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
18739 # Here's the command file that I use to get rogue to work on the 4025.
18740 # It should work with any program using the old curses (e.g. it better
18741 # not try to scroll, or cursor addressing won't work. Also, you can't
18743 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
18744 tek4025-cr|tek 4025 for curses and rogue,
18746 cols#80, it#8, lines#33,
18747 clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
18748 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n,
18749 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18750 rmcup=\037wor 0, smcup=\037wor 33h,
18751 # next two lines commented out since curses only allows 128 chars, sigh.
18752 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
18753 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
18754 tek4025ex|4025ex|4027ex|tek 4025 w/!,
18755 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
18757 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18758 tek4105|tektronix 4105,
18759 OTbs, am, mir, msgr, ul, xenl, xt,
18760 cols#79, it#8, lines#29,
18761 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
18762 clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
18763 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
18764 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
18765 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
18766 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
18767 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
18768 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
18769 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
18770 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
18771 smul=\E[=5;<2m, tbc=\E[1g,
18773 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
18774 tek4105-30|4015 emulating 30 line vt100,
18775 am, mir, msgr, xenl, xon,
18776 cols#80, it#8, lines#30, vt#3,
18777 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18778 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
18779 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18780 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18781 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
18782 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
18783 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
18784 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
18785 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
18786 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
18787 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
18788 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
18789 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18790 %;m%?%p9%t\016%e\017%;$<2>,
18791 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
18792 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
18795 # Tektronix 4105 from BRL
18796 # The following setup modes are assumed for normal operation:
18797 # CODE ansi CRLF no DABUFFER 141
18798 # DAENABLE yes DALINES 30 DAMODE replace
18799 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
18800 # FLAGGING input INSERTREPLACE replace LFCR no
18801 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
18802 # SELECTCHARSET G1 0 TABS -2
18803 # Other setup modes may be set for operator convenience or communication
18804 # requirements; I recommend
18805 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
18806 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
18807 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
18808 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
18809 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
18810 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
18812 # and factory color maps. After setting these modes, save them with NVSAVE. No
18813 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18814 # "IC" cannot be used in combination with "im" & "ei".
18815 # "tek4105a" is just a guess:
18816 tek4105a|Tektronix 4105,
18817 OTbs, OTpt, msgr, xon,
18818 OTkn#8, cols#80, it#8, lines#30, vt#3,
18819 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
18820 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
18821 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18822 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18823 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18824 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
18825 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18826 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
18827 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, is2=\E%!1,
18828 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18829 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
18830 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
18831 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
18832 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
18833 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18834 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
18835 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
18836 \E[?7;8h\E[r\E[m\E>,
18837 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
18838 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18841 # Tektronix 4106/4107/4109 from BRL
18842 # The following setup modes are assumed for normal operation:
18843 # CODE ansi COLUMNMODE 80 CRLF no
18844 # DABUFFER 141 DAENABLE yes DALINES 32
18845 # DAMODE replace DAVISIBILITY yes ECHO no
18846 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
18847 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
18848 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
18850 # Other setup modes may be set for operator convenience or communication
18851 # requirements; I recommend
18852 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
18853 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
18854 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
18855 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
18856 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
18857 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
18859 # and factory color maps. After setting these modes, save them with NVSAVE. No
18860 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18861 # "IC" cannot be used in combination with "im" & "ei".
18862 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
18864 cols#80, it#8, lines#32, vt#3,
18865 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
18866 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
18867 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18868 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18869 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18870 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
18871 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18872 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
18873 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, is2=\E%!1,
18874 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18875 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
18876 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
18877 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
18878 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
18879 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18880 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
18881 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
18882 ;5l\E[?7;8h\E[r\E[m\E>,
18883 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
18884 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
18886 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
18887 # 0 selects Tek mode, i.e., \E%!0
18888 # 1 selects ANSI mode
18889 # 2 selects ANSI edit-mode
18890 # 3 selects VT52 mode
18892 # One odd thing about the description (which has been unchanged since the 90s)
18893 # is that the cursor addressing is using VT52 mode, and a few others use the
18894 # VT52's non-CSI versions of ANSI, e.g., \EJ.
18895 tek4107|tek4109|tektronix terminals 4107 4109,
18896 OTbs, am, mir, msgr, ul, xenl, xt,
18897 cols#79, it#8, lines#29,
18898 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
18899 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r,
18900 cub1=^H, cud1=\n, cuf1=\EC,
18901 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
18902 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n,
18903 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18904 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
18905 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
18906 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
18907 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
18908 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
18909 smul=\E%!1\E[4m$<2>\E%!0,
18910 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
18911 # see the note attached to tek4207.
18912 tek4207-s|Tektronix 4207 with sysline but no memory,
18914 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
18915 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
18916 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
18917 is2=\E7\E[?6l\E[2K\E[?6h\E8,
18918 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
18920 # The 4110 series may be a wonderful graphics series, but they make the 4025
18921 # look good for screen editing. In the dialog area, you can't move the cursor
18922 # off the bottom line. Out of the dialog area, ^K moves it up, but there
18923 # is no way to scroll.
18925 # Note that there is a floppy for free from Tek that makes the
18926 # 4112 emulate the vt52 (use the vt52 termcap). There is also
18927 # an expected enhancement that will use ANSI standard sequences.
18929 # 4112 in non-dialog area pretending to scroll. It really wraps
18930 # but vi is said to work (more or less) in this mode.
18932 # 'vi' works reasonably well with this entry.
18934 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
18937 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
18938 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
18939 # The 4112 with the ANSI compatibility enhancement
18940 tek4112|tek4114|tektronix 4110 series,
18943 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
18944 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
18945 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
18946 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
18947 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
18948 tek4112-nd|4112 not in dialog area,
18950 cuu1=^K, use=tek4112,
18951 tek4112-5|4112 in 5 line dialog area,
18952 lines#5, use=tek4112,
18953 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
18954 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
18955 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
18956 # previously \0410 and \0411 sequences...I don't *think* they were supposed
18957 # to be 4-digit octal -- esr)
18958 tek4113|tektronix 4113 color graphics with 5 line dialog area,
18961 clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
18962 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
18964 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
18965 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
18967 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
18968 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
18969 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
18970 # :vb: needs enough delay to let you see the background color being toggled.
18971 tek4113-nd|tektronix 4113 color graphics with no dialog area,
18973 cols#80, it#8, lines#34,
18974 clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
18976 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
18978 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
18979 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
18980 # This entry is from Tek. Inc. (Brian Biehl)
18981 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
18982 otek4115|Tektronix 4115,
18983 OTbs, am, da, db, eo,
18984 cols#80, it#8, lines#34,
18985 cbt=\E[Z, clear=\E[H\E[2J,
18986 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
18987 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
18988 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
18989 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
18991 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
18992 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
18993 kbs=^H, ri=\EM, rmam=\E[?7l,
18994 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
18995 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
18996 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
18998 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
19001 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
19002 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
19003 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19004 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
19005 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
19006 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
19007 il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D,
19008 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
19009 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
19010 rmso=\E[m, rmul=\E[m,
19011 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
19013 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
19014 vpa=\E[%p1%{1}%+%dd,
19015 # The tek4125 emulates a vt100 incorrectly - the scrolling region
19016 # command is ignored. The following entry replaces <csr> with the needed
19017 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
19018 # chokes on; and adds a lot of initialization for the tek dialog area.
19019 # Note that this entry uses all 34 lines and sets the cursor color to green.
19020 # Steve Jacobson 8/85
19021 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
19022 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
19023 tek4125|tektronix 4125,
19025 csr@, dl1=\E[1M, il1=\E[1L,
19026 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
19027 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
19029 rc@, sc@, smkx=\E=, use=vt100+4bsd,
19031 # From: <jcoker@ucbic>
19032 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
19033 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
19034 # note that if jcoker wasn't confused you may be able to use this one.
19035 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
19036 tek4207|Tektronix 4207 graphics terminal with memory,
19037 am, bw, mir, msgr, ul, xenl,
19038 cols#80, it#8, lines#32,
19039 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
19040 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19041 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
19042 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
19043 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
19044 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
19045 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
19046 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
19047 rev=\E[7m, ri=\E[T,
19048 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
19049 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
19050 smul=\E[4m, tbc=\E[1g,
19052 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
19053 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
19054 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
19055 tek4404|tektronix 4404,
19057 cols#80, it#8, lines#32,
19058 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
19059 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
19060 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
19061 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
19062 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
19063 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
19064 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
19065 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
19066 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
19067 # Some unknown person wrote:
19068 # I added the is string - straight Unix has ESC ; in the login
19069 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
19070 # mode). The is string here cleans up a few things (but not
19072 ct8500|tektronix ct8500,
19075 bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
19076 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
19077 dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
19078 il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
19079 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
19081 # Tektronix 4205 terminal.
19083 # am is not defined because the wrap around occurs not when the char.
19084 # is placed in the 80'th column, but when we are attempting to type
19085 # the 81'st character on the line. (esr: hmm, this is like the vt100
19086 # version of xenl, perhaps am + xenl would work!)
19088 # Bold, dim, and standout are simulated by colors and thus not allowed
19089 # with colors. The tektronix color table is mapped into the RGB color
19090 # table by setf/setb. All colors are reset to factory specifications by oc.
19091 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
19092 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
19093 # interval then maps into pre-defined value.
19094 tek4205|tektronix 4205,
19096 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
19097 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
19098 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
19099 clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
19100 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19101 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19102 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
19103 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
19104 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
19106 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
19107 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
19108 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
19109 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
19110 1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
19111 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
19112 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}
19113 %<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%t
19114 C8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:
19116 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
19117 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
19118 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
19120 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
19122 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
19123 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
19124 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
19125 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
19127 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
19128 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
19130 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
19131 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
19132 smul=\E[4m, tbc=\E[1g,
19134 #### Teletype (tty)
19136 # These are the hardcopy Teletypes from before AT&T bought the company,
19137 # clattering electromechanical dinosaurs in Bakelite cases that printed on
19138 # pulpy yellow roll paper. If you remember these you go back a ways.
19139 # Teletype-branded VDTs are listed in the AT&T section.
19141 # The earliest UNIXes were designed to use these clunkers; nroff and a few
19142 # other programs still default to emitting codes for the Model 37.
19145 tty33|tty35|model 33 or 35 teletype,
19148 bel=^G, cr=\r, cud1=\n, ind=\n,
19149 tty37|model 37 teletype,
19151 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
19154 # There are known to be at least three flavors of the tty40, all seem more
19155 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
19156 # awful braindamage, such as printing a visible newline indicator after each
19157 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
19158 # braindamaged but has hope and is described here. The 40-4 is a 3270
19159 # lookalike and beyond hope. The terminal has visible bell but I don't know
19160 # it - it's null here to prevent it from showing the BL character.
19161 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
19162 # a "newline" style terminal (-crmode) vi figures all it needs is nl
19163 # to get crlf, even if <cr> is not ^M.)
19164 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
19165 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
19168 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
19169 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
19170 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
19171 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
19172 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
19173 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
19174 tty43|model 43 teletype,
19175 OTbs, am, hc, os, xon,
19177 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
19182 # You can add <is2=\E<> to put this 40-column mode, though I can't
19183 # for the life of me think why anyone would want to.
19184 scanset|sc410|sc415|Tymshare Scan Set,
19187 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H,
19188 cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
19189 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, kcub1=\ED,
19190 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
19191 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
19193 #### Volker-Craig (vc)
19195 # If you saw a Byte Magazine cover with a terminal on it during the early
19196 # 1980s, it was probably one of these. Carl Helmers liked them because
19197 # they could crank 19.2 and were cheap (that is, he liked them until he tried
19198 # to program one...)
19201 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
19202 # every other linefeed.
19203 vc303|vc103|vc203|volker-craig 303,
19206 bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
19207 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
19208 kcuu1=^N, ll=\017$<1>W,
19209 vc303a|vc403a|volker-craig 303a,
19210 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
19211 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
19212 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
19213 vc404|volker-craig 404,
19216 bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
19217 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
19218 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
19219 kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
19220 vc404-s|volker-craig 404 w/standout mode,
19221 cud1=\n, rmso=^O, smso=^N, use=vc404,
19222 # From: <wolfgang@cs.sfu.ca>
19223 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
19224 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
19227 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
19228 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
19229 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
19230 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
19231 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
19232 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
19233 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
19234 rmso=\E^_, smso=\E^Y,
19235 vc415|volker-craig 415,
19236 clear=^L, use=vc404,
19238 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
19241 #### IBM PC and clones
19244 # The pcplot IBM-PC terminal emulation program is really messed up. It is
19245 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
19246 # doesn't support scrolling regions, ignores add line commands, and ignores
19247 # delete line commands. Consequently, the resulting behavior looks like a
19248 # crude adm3a-type terminal.
19249 # Steve Jacobson 8/85
19250 pcplot|pc-plot terminal emulation program,
19252 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
19253 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
19254 # I've found that my KayPro II, running MDM730, continues to emulate an
19255 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
19256 # system the following termcap entry works well:
19257 # I have noticed a couple of minor glitches, but nothing I can't work
19258 # around. (I added two capabilities from the BRL entry -- esr)
19259 kaypro|kaypro2|kaypro II,
19262 bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L,
19263 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
19264 el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K,
19266 # From IBM, Thu May 5 19:35:27 1983
19267 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
19268 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
19271 bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\,
19272 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
19274 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
19275 OTbs, am, bw, eo, hs, km, msgr, ul,
19276 cols#80, it#8, lines#24,
19277 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
19279 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
19280 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
19281 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19282 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
19283 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
19284 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
19285 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19286 kdch1=^?, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242,
19287 kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250,
19288 khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H,
19289 nel=\r, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
19290 rmso=\E[m, rmul=\E[m,
19291 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
19293 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
19297 # Apple II firmware console first, then various 80-column cards and
19298 # terminal emulators. For two cents I'd toss all these in the UFO file
19299 # along with the 40-column apple entries.
19302 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
19303 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
19304 # function of TIC, not the firmware.
19305 # The clear key on a IIgs will do something like clear-screen,
19306 # depending on what you're in.
19307 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
19308 OTbs, am, bw, eo, msgr,
19309 cols#80, it#8, lines#24,
19310 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
19311 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19312 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n,
19313 kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N,
19315 # Apple //e with 80-column card, entry from BRL
19316 # The modem interface is permitted to discard LF (maybe DC1), otherwise
19317 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
19318 # Auto-wrap does not work right due to newline scrolling delay, which also
19319 # requires that you set "stty cr2".
19320 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
19321 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
19322 # using a terminal emulation program instead of the built-in firmware.
19326 bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_,
19327 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
19328 is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K,
19329 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
19331 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
19332 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
19333 apple2e-p|Apple //e via Pascal,
19334 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
19335 kcud1=\n, use=apple2e,
19336 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
19337 # Enable DC3/DC1 flow control with "stty ixon -ixany".
19338 apple-ae|ASCII Express,
19339 OTbs, am, bw, msgr, nxon, xon,
19340 cols#80, it#8, lines#24,
19341 bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
19342 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19343 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
19344 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
19346 appleII|apple ii plus,
19348 cols#80, it#8, lines#24,
19349 clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
19350 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
19351 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
19352 is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
19353 # Originally by Gary Ford 21NOV83
19354 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
19355 apple-80|apple II with smarterm 80 col,
19358 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
19359 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
19360 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
19361 apple-soroc|apple emulating soroc 120,
19364 bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19365 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
19366 home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
19367 # From Peter Harrison, Computer Graphics Lab, San Francisco
19368 # ucbvax!ucsfmis!harrison .....uucp
19369 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
19370 # "These two work. If you don't have the inverse video chip for the
19371 # Apple with videx then remove the :so: and :se: fields."
19372 # (apple-videx: this used to be called DaleApple -- esr)
19373 apple-videx|Apple with videx videoterm 80 column board with inverse video,
19375 cols#80, it#8, lines#24,
19376 clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\,
19377 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19378 home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y,
19379 rmso=^Z2, sgr0=^Z2, smso=^Z3,
19380 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
19381 # Apple Cat ][ 212 modem, + more all
19382 # controlled by ASCII Express: Pro.
19383 # From Dave Shaver <isucs1!shaver>
19384 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
19387 acsc=, clear=^L, cuf1=^\,
19388 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19389 flash=^W35^W06, home=^Y,
19390 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
19392 apple-uterm|Ultraterm for Apple micros,
19395 acsc=, clear=^L, cuf1=^\,
19396 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19397 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
19398 # from trwrba!bwong (Bradley W. Wong):
19400 # This entry assumes that you are using an apple with the UCSD Pascal
19401 # language card. SYSTEM.MISCINFO is assumed to be the same as that
19402 # supplied with the standard apple except that screenwidth should be set
19403 # using SETUP to 80 columns. Note that the right arrow is not mapped in
19404 # this termcap entry. This is because that key, on the Apple, transmits
19405 # a ^U and would thus preempt the more useful "up" function of vi.
19408 apple80p|80-column apple with Pascal card,
19411 clear=^Y^L, cuf1=^\\:,
19412 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
19415 # Apple II+ equipped with Videx 80 column card
19417 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
19418 # manually converted by D A Gwyn
19420 # DO NOT use any terminal emulation with this data base, it works directly
19421 # with the Videx card. This has been tested with vi 1200 baud and works fine.
19423 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
19424 # 1 screen, while in R2 ^U doesn't.
19425 # For inverse alternate character set add:
19426 # <smacs>=^O:<rmacs>=^N:
19427 # (apple-v: added it#8 -- esr)
19428 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
19430 cols#80, it#8, lines#24,
19431 bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H,
19432 cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
19433 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
19434 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
19435 khome=^Y, rmso=^Z2, smso=^Z3,
19436 apple-videx3|vapple|Apple II with 80 col card,
19439 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
19440 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
19441 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19442 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
19443 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
19444 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
19445 aepro|Apple II+ running ASCII Express Pro--vt52,
19448 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
19449 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
19451 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
19452 apple-vm80|ap-vm80|apple with viewmax-80,
19455 clear=\014$<300/>, cuf1=^\\:,
19456 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
19457 ed=\013$<300/>, el=^], home=\031$<200/>,
19459 #### Apple Lisa & Macintosh
19462 # (lisa: changed <cvvis> to <cnorm> -- esr)
19463 lisa|apple lisa console display (black on white),
19464 OTbs, am, eo, msgr,
19465 cols#88, it#8, lines#32,
19466 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
19467 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
19468 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
19469 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
19470 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19471 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
19472 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
19473 liswb|apple lisa console display (white on black),
19474 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
19475 smso=\E[m, smul=\E[4m, use=lisa,
19477 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
19478 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
19480 # These entries assume that the 'Auto Wraparound' is enabled.
19481 # Xon-Xoff flow control should also be enabled.
19483 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
19484 # settings are in non-volatile memory and don't need to be reset upon login.
19485 # Also setting the number of columns glitches the screen annoyingly.
19486 # You can type "reset" to get them set.
19488 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
19489 OTbs, OTpt, am, xenl, xon,
19490 OTkn#4, cols#80, it#8, lines#24, vt#3,
19491 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
19492 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
19493 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
19494 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
19495 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD,
19496 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
19497 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
19498 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
19499 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
19500 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
19502 # Lisaterm in 132 column ("wide") mode.
19503 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
19505 kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm,
19506 # Although MacTerminal has insert/delete line, it is commented out here
19507 # since it is much faster and cleaner to use the "lock scrolling region"
19508 # method of inserting and deleting lines due to the MacTerminal implementation.
19509 # Also, the "Insert/delete ch" strings have an extra character appended to them
19510 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
19511 # supported by MacTerminal.
19512 mac|macintosh|Macintosh with MacTerminal,
19515 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
19516 # Lisaterm in 132 column ("wide") mode.
19517 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
19520 #### Radio Shack/Tandy
19523 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
19524 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
19525 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
19526 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
19528 cols#80, it#8, lines#24,
19529 bel=^G, blink=^_", bold=\E\:\001, civis=^E\s,
19530 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F,
19531 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
19532 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n,
19533 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
19534 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
19535 # (trs2: removed obsolete ":nl=^_:" -- esr)
19536 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
19538 cols#80, it#8, lines#24,
19539 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^],
19540 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
19541 el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\,
19542 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
19543 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
19544 # (This had extension capabilities
19545 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
19546 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
19547 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
19548 trs16|trs-80 model 16 console,
19550 cols#80, it#8, lines#24,
19551 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
19552 cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
19553 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19554 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19555 ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19556 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
19557 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
19558 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
19559 smacs=\ERG, smso=\ERD,
19561 #### Commodore Business Machines
19563 # Formerly located in West Chester, PA; went spectacularly bust in 1994
19564 # after years of shaky engineering and egregious mismanagement. Made one
19565 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
19566 # C-128, VIC-20). The C-64 is said to have been the most popular machine
19567 # ever (most units sold); they can still be found gathering dust in closets
19571 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
19572 # Added a few more entries, converted caret-type control sequence (^x) entries
19573 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
19574 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
19576 # :as:, :ae: Support for alternate character sets.
19577 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
19578 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
19579 # This one appears to fix a problem I always had with a line ending
19580 # at 'width+1' (I think) followed by a blank line in vi. The blank
19581 # line tended to disappear and reappear depending on how the screen
19582 # was refreshed. Note that this is probably needed only if you use
19583 # something like a Dnet Fterm with the window sized to some peculiar
19584 # dimension larger than 80 columns.
19585 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
19586 # (amiga: removed obsolete :kn#10:,
19587 # also added empty <acsc> to suppress a warning --esr)
19589 OTbs, am, bw, xenl,
19591 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
19592 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
19593 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
19594 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19595 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19596 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
19597 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
19598 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
19599 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
19600 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
19601 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
19602 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
19603 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
19605 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
19606 # (amiga: added empty <acsc> to suppress a warning.
19607 # I'm told this entry screws up badly with AS225, the Amiga
19608 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
19609 amiga-h|Hans Verkuil's Amiga ANSI,
19612 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
19613 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r,
19614 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
19615 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
19616 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
19617 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
19618 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
19619 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
19620 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
19621 kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
19622 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
19623 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
19624 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
19625 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
19626 smso=\2337m, smul=\2334m,
19628 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
19630 # Pavel Fedin added
19635 amiga-8bit|Amiga ANSI using 8-bit controls,
19636 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19637 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
19638 kpp=\233T, ri=\215, rin@, use=amiga-h,
19640 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
19641 # requires use of appropriate preferences settings.
19642 amiga-vnc|Amiga using VNC console (black on light gray),
19643 am, da, db, msgr, ndscr,
19644 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#0x100,
19645 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
19646 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=\r,
19647 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
19648 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19649 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19650 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19651 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
19652 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
19653 indn=\E[%p1%dS, invis=\E8m,
19654 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19655 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
19656 kcuu1=\E[A, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
19657 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
19658 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
19659 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
19660 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
19661 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
19662 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19663 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
19664 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
19665 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
19666 smso=\E[1m, smul=\E[4m,
19668 # MorphOS on Genesi Pegasos
19669 # By Pavel Fedin <sonic_amiga@rambler.ru>
19670 morphos|MorphOS on Genesi Pegasos,
19671 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19672 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
19673 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
19674 ri=\215, rin@, use=amiga-h,
19676 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
19677 # I'm trying to write a termcap for a commodore b-128, and I'm
19678 # having a little trouble. I've had to map most of my control characters
19679 # to something that unix will accept (my delete-char is a ctrl-t, etc),
19680 # and create some functions (like cm), but thats life.
19681 # The problem is with the arrow keys - right, and up work fine, but
19682 # left deletes the previous character and down I just can't figure out.
19683 # Jove knows what I want, but I don't know what it's sending to me (it
19684 # isn't thats bound to next-line in jove).
19685 # Anybody got any ideas? Here's my termcap.
19686 # DAG -- I changed his "^n" entries to "\n"; see if that works.
19688 commodore|b-128|Commodore B-128 micro,
19690 OTdN#20, cols#80, lines#24, pb#150,
19691 OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n,
19692 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
19693 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
19694 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
19695 kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
19700 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
19701 northstar|North Star Advantage,
19705 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
19706 el=\016$<200/>, home=\034\032$<200/>,
19710 # Thu Jul 7 03:55:16 1983
19712 # As an aside, be careful; it may sound like an anomaly on the
19713 # Osborne, but with the 80-column upgrade, it's too easy to
19714 # enter lines >80 columns!
19716 # I've already had several comments...
19717 # The Osborne-1 with the 80-col option is capable of being
19718 # 52, 80, or 104 characters wide; default to 80 for compatibility
19719 # with most systems.
19721 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
19722 osborne-w|osborne1-w|osborne I in 104-column mode,
19724 cols#104, lines#24,
19725 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19726 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19727 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
19728 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
19729 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
19730 osborne|osborne1|osborne I in 80-column mode,
19731 OTbs, am, mir, msgr, ul, xhp,
19732 OTdB#4, cols#80, lines#24,
19733 clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
19734 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
19735 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
19736 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
19737 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
19739 # Osborne Executive definition from BRL
19740 # Similar to tvi920
19741 # Added by David Milligan and Tom Smith (SMU)
19742 osexec|Osborne executive,
19744 OTug#1, cols#80, lines#24, xmc#1,
19745 OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19746 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19747 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
19748 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
19749 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
19750 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
19751 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
19754 #### Console types for obsolete UNIX clones
19756 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
19757 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
19758 # were commercial, Minix an educational tool sold in conjunction with a book.
19759 # Memory-segmentation limits and a strong tendency to look like V7 long after
19760 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
19761 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
19762 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
19763 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
19764 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
19765 # even as single processes under SunOS and the Macintosh OS.
19769 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
19770 minix|minix console (v3),
19771 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
19772 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
19773 \301w\302x\263y\363z\362{\343|\330}\234~\376,
19774 kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
19775 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
19776 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
19777 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
19778 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
19779 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
19780 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
19781 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
19782 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
19783 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
19784 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
19785 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
19786 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
19789 minix-3.0|minix console (v3.0),
19790 use=ecma+color, use=minix-1.7,
19793 # https://web.archive.org/web/20030914201935/http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
19794 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
19795 minix-1.7|minix console (v1.7),
19797 cols#80, it#8, lines#25,
19798 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
19799 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19800 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19801 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19802 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
19803 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
19804 il1=\E[L, ind=\n, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19805 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
19806 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
19807 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=\r\n,
19808 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
19809 smso=\E[7m, smul=\E[4m,
19810 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
19811 minix-old|minix-1.5|minix console (v1.5),
19813 cols#80, it#8, lines#25,
19814 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
19815 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19816 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19817 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19818 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
19819 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
19820 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19821 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
19822 khome=\E[H, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m,
19823 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
19824 # The linewrap option can be specified by editing /usr/include/minix/config.h
19825 # before recompiling the minix 1.5 kernel.
19826 minix-old-am|minix console with linewrap,
19829 pc-minix|minix console on an Intel box,
19830 use=klone+acs, use=minix-3.0,
19832 # According to the Coherent 2.3 manual, the PC console is similar
19833 # to a z19. The differences seem to be (1) 25 lines, (2) no status
19834 # line, (3) standout is broken, (4) ins/del line is broken, (5)
19835 # has blinking and bold.
19836 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
19838 cols#80, it#8, lines#25,
19839 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
19840 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
19841 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED,
19842 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
19843 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
19845 # According to the Venix 1.1 manual, the PC console is similar
19846 # to a DEC vt52. Differences seem to be (1) arrow keys send
19847 # different strings, (2) enhanced standout, (3) added insert/delete line.
19848 # Note in particular that it doesn't have automatic margins.
19849 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
19850 # not described here because this derives from an old termcap entry.
19851 pc-venix|venix|IBM PC console running Venix,
19852 cols#80, it#8, lines#25,
19853 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
19854 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19855 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK,
19856 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
19858 #### Miscellaneous microcomputer consoles
19860 # If you know anything more about any of these, please tell me.
19863 # The MAI Basic Four computer was obsolete at the end of the 1980s.
19864 # It may be used as a terminal by putting it in "line" mode as seen on
19865 # one of the status lines.
19866 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
19867 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
19868 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
19869 # used \ED instead.
19870 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
19871 mai|basic4|MAI Basic Four in ansi mode,
19872 am, da, db, mir, msgr,
19873 cols#82, it#8, lines#25,
19874 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
19875 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=^X,
19876 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
19877 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
19878 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
19879 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
19880 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19881 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
19882 kf7=\EOV, kf8=\EOW, nel=\r\ED, rc=\E8, rev=\E[7m, ri=\E[T,
19883 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
19884 smir=\E[4h, smso=\E[7m, smul=\E[4m,
19885 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
19886 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
19888 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
19889 # The Basis 108 was a Apple II clone, manufactured by the "Basis
19890 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
19891 # about 1,5 km from where I live, but doesn't build own computers any
19892 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
19893 # equipped with one or two 5.25" disk drives, had a monochrome and colour
19894 # video output for a TV set or a dedicated monitor and several slots for
19895 # Apple II cards. Basis 108 were quite popular at german schools before
19896 # the advent of the IBM PC. They run, for example, the UCSD Pascal
19897 # development system (which I used even in 1993 to program the steering
19898 # and data recording for our school's experimental solar panel :), Apple DOS
19900 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
19901 basis|BASIS108 computer with terminal translation table active,
19902 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
19903 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
19904 smso=\E(, use=adm3a,
19905 # luna's BMC terminal emulator
19906 luna|luna68k|LUNA68K Bitmap console,
19907 cols#88, lines#46, use=ansi-mini,
19908 megatek|pegasus workstation terminal emulator,
19911 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
19912 # interface (pre-Macintosh by several years) that went nowhere.
19913 xerox820|x820|Xerox 820,
19916 bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19917 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
19920 #### Videotex and teletext
19923 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
19924 # \E[?3l 80 columns
19925 # \E[?4l scrolling on
19926 # \E[12h local echo off
19927 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
19928 # \E)0 G1 DEC set (line graphics)
19930 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
19931 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
19932 OTbs, eslok, hs, xenl,
19933 cols#80, it#8, lines#24, wsl#72, xmc#0,
19934 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
19935 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
19936 cnorm=\E[<1l, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19937 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
19938 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19939 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19940 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=\n,
19941 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, ip=$<7/>,
19942 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
19943 is3=\E[?3l, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
19944 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
19945 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
19946 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
19947 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
19948 mc0=\E[i, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
19949 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
19950 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
19951 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
19952 u6=\E[%i%d;%dR, u7=\E[6n,
19954 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
19956 minitel1|minitel 1,
19957 am, bw, eslok, hs, hz, .msgr, G0,
19958 colors#8, cols#40, lines#24, pairs#8, .ncv#16,
19959 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
19960 civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
19961 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
19962 dsl=\037@A\030\n, el=^X,
19963 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n,
19964 home=^^, ind=\n, is2=\E;`ZQ\E\:iC\E\:iE\021, kbs=^SG,
19965 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
19966 krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
19967 rev=\E], ri=^K, rmso=\E\\,
19968 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
19969 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
19970 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
19972 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
19973 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
19974 %tC%e%p1%'@'%+%c%;,
19975 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
19976 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
19977 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
19978 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
19979 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D,
19980 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
19982 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
19983 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
19984 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
19985 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
19986 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
19987 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
19988 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
19989 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
19990 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
19991 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
19992 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
19993 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
19994 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
19996 minitel1b|minitel 1-bistandard (in 40cols mode),
19998 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
19999 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
20000 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
20001 is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I,
20002 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
20003 kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/,
20004 kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5,
20005 kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9,
20006 kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG,
20007 kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H,
20008 kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition,
20009 lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation,
20010 rmir=\E[4l, smir=\E[4h,
20011 u8=\001%[ABCPtuvwxyz0123456789\:;<=>?]\004,
20012 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
20013 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E\:|k, .rmkx=\E;jYA,
20014 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D,
20016 # rmkx posait des problemes (logout en sortant de vi).
20017 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
20018 am@, bw@, eslok@, hz@, msgr, G0,
20019 colors@, cols#80, it#8, pairs@,
20020 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
20021 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
20022 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
20023 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
20024 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
20025 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
20026 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
20027 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
20028 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
20029 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
20030 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
20032 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
20033 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
20034 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
20035 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
20037 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
20038 smso=\E[7m, smul=\E[4m,
20039 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
20040 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
20041 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
20042 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
20044 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
20045 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
20046 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
20048 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
20050 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
20051 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
20052 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
20053 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
20054 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
20055 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
20056 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
20057 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
20058 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
20059 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
20062 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
20064 bold=\EG, clear=^L\EB,
20065 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
20066 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
20067 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
20068 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
20071 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
20074 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
20075 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
20076 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
20077 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
20078 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
20080 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
20081 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
20082 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
20083 .u8=\001Cu|\004r, use=minitel1b,
20087 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
20089 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
20090 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
20091 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
20093 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
20094 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
20095 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
20096 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
20098 # Fonctionne par exemple avec Midnight Commander (mc).
20100 minitel2-80|minitel 2 (80cols) avec filets vt100 (DEC),
20102 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
20103 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
20104 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, E0=^O,
20106 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
20107 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
20108 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
20109 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
20110 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
20111 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
20112 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
20113 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
20114 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
20115 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
20116 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
20117 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
20118 \,+k\,.l\,0\177\,-j,
20121 minitel12-80|minitel 12 (80cols),
20123 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
20125 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
20127 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
20129 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
20130 E0=^O, S0=\E)3\016,
20131 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
20132 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
20133 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
20134 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
20135 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
20136 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
20137 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
20138 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
20139 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
20140 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
20141 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
20142 \,\\\,m\,+k\,.l\,0\177\,-j,
20146 # Add these in your ~/.screenrc for inputting some special glyphs like french
20147 # accentuated chars in 40 cols mode:
20149 # bindkey ^YA digraph '`' # Saisi accent grave.
20150 # bindkey ^YB digraph "'" # Saisi accent aigu.
20151 # bindkey ^YC digraph '^' # Saisi accent circonflexe.
20152 # bindkey ^YH digraph '"' # Saisi accent trema.
20154 # bindkey ^Y# stuff \243 # Livre.
20155 # bindkey "^Y\047" stuff \247 # Paragraphe.
20156 # bindkey ^Yj stuff \306 # AE
20157 # bindkey ^Yz stuff \346 # ae
20158 # bindkey ^YKc stuff \347 # c cedille.
20161 screen.minitel1|Screen specific for minitel1,
20163 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
20165 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
20166 rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
20167 use=xterm+x11mouse, use=screen,
20169 screen.minitel1b|Screen specific for minitel1b,
20170 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
20171 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
20172 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
20173 use=screen.minitel1,
20175 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
20176 colors@, ncv@, pairs@,
20177 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
20178 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
20179 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
20180 use=screen.minitel1b,
20182 screen.minitel1-nb|Screen specific for minitel1-nb,
20183 colors@, ncv@, pairs@,
20184 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
20185 use=screen.minitel1,
20187 screen.minitel1b-nb|Screen specific for minitel1b-nb,
20188 colors@, ncv@, pairs@,
20189 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
20190 use=screen.minitel1b,
20192 # From: Alexandre Montaron, 29 Sep 2016
20194 linux-m1|Linux Minitel 1 "like" Couleurs,
20195 am, bw@, ccc, mir, msgr, xenl,
20196 colors#8, it#8, ncv#16, pairs#64,
20197 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
20198 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
20199 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20200 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
20201 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
20202 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
20203 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
20204 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
20205 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
20206 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
20207 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
20209 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
20210 kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r, kcub1=\E[D,
20211 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
20212 kdl1=\E\E[A, kend=\E[4~, kent=\EOM, kf1=\E[[A, kf10=\E[21~,
20213 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
20214 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
20215 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
20216 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
20217 khome=\E[1~, kich1=\E[2~, kil1=\E\E[B, kmous=\E[M,
20218 knp=\E[6~, kpp=\E[5~, nel=\EE, oc=\E]R\E]P3FFFF80,
20219 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
20220 rmam=\E[?7l, rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m,
20221 rs1=\Ec, rs3=\E[37;40m\E[8], sc=\E7, setab=\E[4%p1%dm,
20222 setaf=\E[3%p1%dm, sgr0=\E[m, smacs=^N, smam=\E[?7h,
20223 smir=\E[4h, smpch=\E[11m, smso=\E[7m, tbc=\E[3g,
20224 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\EZ,
20225 vpa=\E[%i%p1%dd, .VN=\E[?5l, .VR=\E[?5h, .am@,
20226 .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H, .rmcup=,
20227 .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
20229 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20230 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20231 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20232 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20233 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20234 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20235 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20236 \n\n\n\n\n\n\n\n\n\n,
20238 # 1. Using double-shapes for vt100 graphical chars (eg: mc).
20239 # 2. Native brown color corrected to good yellow color.
20240 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
20241 # 4. Suppressed nonexistent underlined mode (normally as bright).
20242 # 5. ich/ich1 not filled because of non-curses programs.
20244 # 6. Suppressed nonexistent invisible mode.
20245 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
20247 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
20249 colors@, ncv@, pairs@,
20250 acsc@, bold=\E[33m, enacs@, initc@,
20251 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
20252 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
20253 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
20254 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
20255 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
20256 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
20257 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
20260 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
20262 colors@, ncv@, pairs@,
20263 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20264 uvvwwxxyyzz{{||}}~~,
20265 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
20266 enacs=\E)0, initc@,
20267 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
20268 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
20269 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
20271 oc@, op@, rmacs=^O, setab=^A, setaf=^A, sgr0=\E[;37m, smacs=^N,
20273 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
20274 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
20275 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
20276 \E]PFFFFFFF\E[;37m,
20279 # Screen entries counterpart :
20281 screen.linux-m1|Linux m1 specific for screen,
20283 dim=\E[2m, kbs=^?, kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~,
20284 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
20285 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
20286 smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
20287 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20288 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20289 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20290 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20291 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20292 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20293 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
20294 \n\n\n\n\n\n\n\n\n\n,
20295 use=xterm+x11mouse, use=screen,
20297 screen.linux-m1b|Linux m1b specific for screen,
20299 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
20301 screen.linux-m2|Linux m2 specific for screen,
20302 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20303 uvvwwxxyyzz{{||}}~~,
20304 use=screen.linux-m1b,
20308 putty-m1|Putty Minitel 1 "like" Couleurs,
20310 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
20311 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
20312 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20313 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
20314 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1,
20316 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
20318 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
20319 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
20320 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20321 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
20322 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1b,
20324 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
20326 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
20328 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
20329 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
20330 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
20331 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
20332 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m2,
20335 screen.putty-m1|Putty m1 specific for screen,
20336 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
20338 screen.putty-m1b|Putty m1b specific for screen,
20340 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
20342 screen.putty-m2|Putty m2 specific for screen,
20343 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
20344 uvvwwxxyyzz{{||}}~~,
20345 use=screen.putty-m1b,
20346 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
20349 # viewdata lacks a true cup capability,
20350 # so I achieved it with home and cud1/cuf1 sequences only !
20351 viewdata|prestel/viewdata terminals,
20354 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
20356 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
20357 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
20358 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
20359 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
20360 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
20361 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
20362 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
20364 cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
20365 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
20367 viewdata-o|optimized version of viewdata prestel/viewdata terminals,
20368 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
20369 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
20370 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
20371 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
20372 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
20373 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
20374 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
20375 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
20376 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
20377 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
20378 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
20379 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
20380 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
20381 .ll=^^^K, use=viewdata,
20383 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
20385 viewdata-rv|prestel/viewdata terminals with reverse capabilitie (as green),
20387 rmso=\EG, smso=\EB, use=viewdata-o,
20389 ######## OBSOLETE VDT TYPES
20391 # These terminals are *long* dead -- these entries are retained for
20392 # historical interest only.
20394 #### Amtek Business Machines
20397 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
20398 # but these caps were commented out in 8.3; also, removed overridden
20399 # ":do=^J:" -- esr)
20400 abm80|amtek business machines 80,
20403 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
20404 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
20405 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
20407 #### Bell Labs blit terminals
20409 # These were AT&T's official entries. The 5620 FAQ maintained by
20410 # David Breneman <daveb@dgtl.com> has this to say:
20412 # Actually, in the beginning was the Jerq, and the Jerq was white with a
20413 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
20414 # was good. But lo, upon the horizon loomed a mighty management-type person
20415 # (known now only by the initials VP) who said, the mighty Jerq must stay
20416 # alone, and could not go forth into the world. So Locanthi and Pike put the
20417 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
20418 # world. And the Jerq lived the rest of its days in research, but never
20419 # strayed from those paths.
20421 # In all seriousness, the Blit was originally known as the Jerq, but when
20422 # it started to be shown outside of the halls of the Bell Labs Research
20423 # organization, the management powers that be decided that the name could
20424 # not remain. So it was renamed to be Blit. This was in late 1981.
20426 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
20430 blit|jerq|blit running teletype rom,
20432 cols#87, it#8, lines#72,
20433 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
20434 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
20435 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
20436 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
20437 il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kcub1=\ED,
20438 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
20440 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
20441 cbblit|fixterm|blit running columbus code,
20443 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
20444 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
20445 smul=\EU", use=blit,
20447 oblit|ojerq|first version of blit rom,
20448 am, da, db, eo, mir, ul, xon,
20449 cols#88, it#8, lines#72,
20450 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
20451 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
20452 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
20453 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER,
20456 #### Bolt, Beranek & Newman (bbn)
20458 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
20459 # The parent company, best known as the architects of the Internet, is
20462 # Jeff DelPapa <dp@world.std.com> writes:
20463 # The bitgraph was a large white box that contained a monochrome bitmap
20464 # display, and a 68000 to run it. You could download code and run it on
20465 # the cpu, it had 128kb (I think) of memory. I used one in the late
20466 # 70's, sure beat a vt100. It had one strange feature tho -- it used
20467 # the cpu to bitblt pixels to scroll, it took longer than the refresh
20468 # rate, and looked like a rubber sheet stretching, then snapping
20469 # upwards. It had everything the early mac had, except a floppy drive a
20470 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
20471 # Beranek and Neuman) sold at most a few hundred of them to the real
20472 # world. DOD may have bought more...
20475 # Entries for the BitGraph terminals. The problem
20476 # with scrolling in vi can only be fixed by getting BBN to put
20477 # smarter scroll logic in the terminal or changing vi or padding
20478 # scrolls with about 500 ms delay.
20480 # I always thought the problem was related to the terminal
20481 # counting newlines in its input buffer before scrolling and
20482 # then moving the screen that much. Then vi comes along and
20483 # paints lines in on the bottom line of the screen, so you get
20484 # this big white gap.
20486 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
20487 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
20489 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
20490 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
20492 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
20495 bel=^G, clear=\E[H\E[J$<150>, cr=\r,
20496 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
20497 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
20498 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
20499 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
20500 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
20501 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
20502 sgr0=\E[m, smkx=\E=, smso=\E[7m,
20504 bg1.25rv|bbn bitgraph 1.25 (reverse video),
20505 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
20507 bg1.25nv|bbn bitgraph 1.25 (normal video),
20508 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
20510 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
20511 bg1.25|bbn bitgraph 1.25,
20513 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B,
20514 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
20515 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
20516 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
20517 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
20518 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
20519 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
20522 #### Bull (bq, dku, vip)
20524 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
20526 #============================================#
20527 # BULL QUESTAR 210 `SDP' terminals emulation #
20528 #============================================#
20530 # Description written by R.K.Saunders (Bull Transac)
20532 # Modifications written by F. Girard (Bull MTS)
20533 # 19-05-87 V02.00.01
20534 # 17-12-87 V02.00.02
20535 # 15-09-89 V02.00.05
20537 # Typical technical selections F1 (modes SDP/ROLL):
20538 # -------------------------------------------------------
20539 # | 01 02 03 04 05 06 07 08 09 10 |
20540 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
20542 # | 11 12 13 14 15 16 17 18 19 20 |
20543 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
20545 # | 21 22 23 24 25 26 27 28 29 30 |
20546 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
20548 # | 31 32 33 34 35 36 37 38 39 40 |
20549 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
20550 # -------------------------------------------------------
20551 # Typical firmware identification F5 "etat 6":
20552 # P287.02.04b (AZERTY)
20553 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
20554 # P298.03.03 (monochrome) or P374.03.02 (colour)
20556 # SM SDP mode (VIP command): ^[[?=h
20557 # RIS (erases screen): ^[c
20558 # DMI disable keyboard: ^[`
20559 # SM double rendition mode: ^[[?>h
20560 # RM solicited status mode: ^[[5l
20561 # RM character mode: ^[[>l
20562 # RM echoplex mode: ^[[12l
20563 # RM column tab mode: ^[[18l
20564 # RM forbid SS2 keyboard mode: ^[[?<l
20565 # SM scroll mode: ^[[=h
20566 # FCF enable XON/XOFF: ^[P1s^[\
20567 # MTL select end msg character: ^[[^Wp
20568 # EMI enable keyboard: ^[b
20569 # RIS retour etat initial: ^[c
20570 # enable FC keypad: ^[[?<h,
20571 # MPW map status line window: ^[PY99:98^[\
20572 # SCP select status line: ^[[0;98v
20573 # ED erase entire partition: ^[[2J
20574 # SCP select main partition: ^[[v
20575 # SM character insertion mode: ^[[4h
20576 # RM character replacement mode: ^[[4l
20577 # COO cursor on: ^[[r
20578 # COO cursor off: ^[[1r
20579 # SGR dim (turquoise) rev attr: ^[[2;7m
20580 # SGR Data normal attr: ^[[m
20581 # SO Line-graphic mode ON: ^N
20582 # SI Line-graphic mode OFF: ^O
20583 # MC start routing to printer: ^[[5i
20584 # MC stop routing to printer: ^M^[[4i
20587 # This entry covers the following terminals:
20588 # dku7102, tws2102, and tws models 2105 to 2112
20589 tws-generic|dku7102|Bull Questar tws terminals,
20590 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
20591 cols#80, it#8, lines#24, wsl#80,
20592 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
20593 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
20594 cnorm=\E[r, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
20595 cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
20596 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20597 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
20598 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
20599 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
20600 il1=\E[L, ind=\n, invis=\E[0;8m,
20601 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
20602 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
20603 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
20604 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
20605 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
20606 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
20607 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
20608 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
20609 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
20610 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
20611 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
20612 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
20613 %p7%t;8%;m%?%p9%t\016%e\017%;,
20614 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
20615 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
20616 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
20617 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
20618 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
20620 tws2103|xdku|BULL Questar tws2103,
20621 ht=^I, use=tws-generic,
20622 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
20623 ht=^I, use=tws2102-sna,
20624 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
20625 clear=\E[2J\E[H, cup@, dl@, dl1@,
20626 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
20627 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
20629 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
20630 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
20631 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
20632 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
20633 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
20635 #=========================================================#
20636 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
20637 #=========================================================#
20639 # Description written by J. Staerck (BULL SA)
20640 # Copyright (c) 1989 BULL SA
20641 #---------------------------------------------------------------------------
20642 # This entry is used for terminals with vt320 emulation mode
20643 # and following set-up :
20644 # 8 bit ISO Latin Character Set (ISO 8859-1),
20645 # 7 bit Control Characters,
20646 # 80 columns screen.
20647 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
20648 # They are used in string capabilities with vt220-320 emulation mode.
20649 # In the following DEC definitions, two kinds of terminfo databases are
20651 # 1. the first with Command Sequence Introducer starting with escape
20652 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
20653 # 2. the second with Command Sequence Introducer starting with escape
20654 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
20655 # Soft Terminal Reset esc [ ! p
20656 # RIS (erases screen): esc c
20657 # DECKPNM numeric keypad mode: esc >
20658 # DECKPAM applic. keypad mode: esc =
20659 # DECSTBM Scrolling region: esc [ r
20660 # SCS select G0 = US: esc ( B
20661 # SCS select G1 = line-graphic: esc ) 0
20662 # Select 7-bit C1 controls: esc sp F
20663 # Select 8-bit C1 controls: esc sp G
20664 # Select cursor home: esc [ H
20665 # Select erase screen: esc [ J
20666 # SM KAM lock keyboard: esc [ 2 h
20667 # RM KAM unlock keyboard: esc [ 2 l
20668 # SM SRM local echo off: esc [ 1 2 h
20669 # RM SRM local echo on: esc [ 1 2 l
20670 # SM LNM New line : esc [ 2 0 h
20671 # RM LNM return = CR only: esc [ 2 0 l
20672 # SM DECCKM cursor keys mode: esc [ ? 1 h
20673 # RM DECCKM appli. keys mode: esc [ ? 1 l
20674 # SM DECANM ANSI mode on: esc [ ? 2 h
20675 # RM DECANM ANSI mode off: esc [ ? 2 l
20676 # SM DECCOLM 132-column screen: esc [ ? 3 h
20677 # RM DECCOLM 80-column screen: esc [ ? 3 l
20678 # SM DECSCLM Smooth scroll: esc [ ? 4 h
20679 # RM DECSCLM Jump scroll: esc [ ? 4 l
20680 # SM DECSCNM screen light backgr. esc [ ? 5 h
20681 # RM DECSCNM screen dark backgr. esc [ ? 5 l
20682 # SM DECOM move within margins: esc [ ? 6 h
20683 # RM DECOM move outside margins: esc [ ? 6 l
20684 # SM DECAWM auto right margin: esc [ ? 7 h
20685 # RM DECAWM auto right margin: esc [ ? 7 l
20686 # SM DECARM auto repeat: esc [ ? 8 h
20687 # RM DECARM auto repeat: esc [ ? 8 l
20688 # DECSASD Select active main: esc [ 0 $ }
20689 # DECSASD Select active status: esc [ 1 $ }
20690 # DECSSDT Select status none: esc [ 0 $ ~
20691 # DECSSDT Select status indic.: esc [ 1 $ ~
20692 # DECSSDT Select status host-wr: esc [ 2 $ ~
20693 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
20694 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
20695 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
20696 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
20697 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
20698 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
20699 # SM DECKBUM clavier informatique esc [ ? 6 8 h
20700 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
20701 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
20702 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
20703 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
20704 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
20705 # Char. and Line attributes: esc [ Ps ... Ps m
20706 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
20707 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
20710 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
20711 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
20712 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
20713 cols#80, it#8, lines#24, vt#3, wsl#80,
20714 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20715 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20716 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
20717 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
20718 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20719 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20720 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
20721 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
20722 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
20723 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
20724 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
20725 is1=\E[63;1"p\E[2h,
20726 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20728 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
20729 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
20730 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
20731 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
20732 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
20733 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
20734 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
20735 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
20736 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
20737 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
20738 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
20739 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
20741 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
20742 %;m%?%p9%t\E(0%e\E(B%;,
20743 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
20744 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
20745 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
20746 bq300-rv|Bull vt320 reverse 80 columns,
20747 flash=\E[?5l$<50>\E[?5h,
20748 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20751 bq300-w|Bull vt320 132 columns,
20753 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20755 rs2=\E[?3h, use=bq300,
20756 bq300-w-rv|Bull vt320 reverse mode 132 columns,
20758 flash=\E[?5l$<50>\E[?5h,
20759 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20761 rs2=\E[?3h, use=bq300,
20763 # This entry is used for terminals with vt320 emulation mode
20764 # and following set-up :
20765 # 8 bit ISO Latin Character Set (ISO 8859-1),
20766 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
20767 # 80 columns screen.
20768 # Soft Terminal Reset csi ! p
20769 # RIS (erases screen): esc c
20770 # DECKPNM numeric keypad mode: esc >
20771 # DECKPAM applic. keypad mode: esc =
20772 # DECSTBM Scrolling region: esc [ r
20773 # SCS select G0 = US: esc ( B
20774 # SCS select G1 = line-graphic: esc ) 0
20775 # Select 7-bit C1 controls: esc sp F
20776 # Select 8-bit C1 controls: esc sp G
20777 # Select cursor home: csi H
20778 # Select erase screen: csi J
20779 # SM KAM lock keyboard: csi 2 h
20780 # RM KAM unlock keyboard: csi 2 l
20781 # SM SRM local echo off: csi 1 2 h
20782 # RM SRM local echo on: csi 1 2 l
20783 # SM LNM New line : csi 2 0 h
20784 # RM LNM return = CR only: csi 2 0 l
20785 # SM DECCKM cursor keys mode: csi ? 1 h
20786 # RM DECCKM appli. keys mode: csi ? 1 l
20787 # SM DECANM ANSI mode on: csi ? 2 h
20788 # RM DECANM ANSI mode off: csi ? 2 l
20789 # SM DECCOLM 132-column screen: csi ? 3 h
20790 # RM DECCOLM 80-column screen: csi ? 3 l
20791 # SM DECSCLM Smooth scroll: csi ? 4 h
20792 # RM DECSCLM Jump scroll: csi ? 4 l
20793 # SM DECSCNM screen light backgr. csi ? 5 h
20794 # RM DECSCNM screen dark backgr. csi ? 5 l
20795 # SM DECOM move within margins: csi ? 6 h
20796 # RM DECOM move outside margins: csi ? 6 l
20797 # SM DECAWM auto right margin: csi ? 7 h
20798 # RM DECAWM auto right margin: csi ? 7 l
20799 # SM DECARM auto repeat: csi ? 8 h
20800 # RM DECARM auto repeat: csi ? 8 l
20801 # DECSASD Select active main: csi 0 $ }
20802 # DECSASD Select active status: csi 1 $ }
20803 # DECSSDT Select status none: csi 0 $ ~
20804 # DECSSDT Select status indic.: csi 1 $ ~
20805 # DECSSDT Select status host-wr: csi 2 $ ~
20806 # SM DECTCEM Visible cursor: csi ? 2 5 h
20807 # RM DECTCEM Invisible cursor: csi ? 2 5 l
20808 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
20809 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
20810 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
20811 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
20812 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
20813 # Char. and Line attributes: csi Ps ... Ps m
20814 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
20815 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
20816 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
20817 bq300-8|Bull vt320 full 8 bits 80 columns,
20818 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
20819 cols#80, it#8, lines#24, vt#3, wsl#80,
20820 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20821 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
20822 clear=\233H\233J, cnorm=\233?25h, cr=\r,
20823 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
20824 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
20825 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
20826 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
20827 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
20828 el=\233K, el1=\2331K, enacs=\E(B\E)0,
20829 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
20830 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
20831 ind=\ED, is1=\E[63;2"p\E[2h,
20832 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20834 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
20835 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
20836 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
20837 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
20838 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
20839 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
20840 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
20841 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
20842 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
20843 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
20844 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
20845 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
20846 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
20847 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
20848 s0ds=\E(B, s1ds=\E(0, sc=\E7,
20849 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
20850 1%;m%?%p9%t\E(0%e\E(B%;,
20851 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
20852 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
20853 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
20854 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
20855 flash=\233?5l$<50>\233?5h,
20856 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20859 bq300-8w|Bull vt320 8-bit 132 columns,
20861 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20863 rs2=\233?3h, use=bq300-8,
20864 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
20866 flash=\233?5l$<50>\233?5h,
20867 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20869 rs2=\233?3h, use=bq300-8,
20871 # This entry is used for terminals with vt320 emulation mode
20872 # a 102 keys keyboard (PC scancode !) and following set-up :
20873 # 8 bit ISO Latin Character Set (ISO 8859-1),
20874 # 7 bit Control Characters,
20875 # 80 columns screen.
20876 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
20877 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
20878 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
20879 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
20880 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20881 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
20882 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
20883 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
20884 flash=\E[?5l$<50>\E[?5h,
20885 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20888 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
20890 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20892 rs2=\E[?3h, use=bq300-pc,
20893 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
20895 flash=\E[?5l$<50>\E[?5h,
20896 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20898 rs2=\E[?3h, use=bq300-pc,
20899 # 8 bit ISO Latin Character Set (ISO 8859-1),
20900 # 8 bit Control Characters,
20901 # 80 columns screen.
20902 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
20903 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
20904 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
20905 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
20906 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
20907 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
20908 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
20909 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
20910 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
20911 flash=\E[?5l$<50>\E[?5h,
20912 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20915 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
20917 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20919 rs2=\E[?3h, use=bq300-8-pc,
20920 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
20922 flash=\E[?5l$<50>\E[?5h,
20923 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20925 rs2=\E[?3h, use=bq300-8-pc,
20927 #======================================================#
20928 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
20929 #======================================================#
20931 # normal mode, 8 bits, 80 columns terminal.
20933 # RIS reset initial state: ^[c
20934 # BLE bell enable ^[h
20935 # BLD bell disable ^[g
20936 # CAMS char. attr. mode set ^[[D
20937 # CAMR char. attr. mode reset ^[[G
20939 # KBU keyboard unlock (set) ^[[W
20940 # KBL keyboard lock (reset) ^[[X
20941 # CM character mode (async.) ^[k
20942 # NEP non echoplex mode (by host) ^[l
20943 # EP echoplex mode (by host) ^[m
20944 # IM insert mode set ^[[I
20945 # IM insert mode reset ^[[J
20946 # RMS roll mode set ^[r
20947 # RMR roll mode reset ^[q
20948 # SM78 set mode vip7800 ^[[1q
20949 # SD scroll up (72 lines) ^[[0s
20950 # SD scroll down (72 lines) ^[[1s
20951 # RBM block mode reset ^[[E
20952 # SLS status line set ^[w
20953 # SLR status line reset ^[v
20954 # SLL status line lock ^[O
20955 # LGS Line-graphic mode set ^[G
20956 # LGR Line-graphic mode reset ^[F
20957 # TBC tab clear (at cursor pos.) ^[[g
20958 # TBI tab initialize ^[[N
20959 # TBS tab set (at cursor pos.) ^[p
20960 # PDS print data space ^[[0p
20961 # PHD print host data ^[[3p
20962 # PDT print data terminator ^[[<p
20963 # PRES print adapter reset ^[[2p
20964 # SSPR multi-part. reset ^[[<>u
20965 # SSP0 partition 0 set ^[[00u
20966 # SSP1 partition n format 1 ^[[PnPnSTRINGu
20967 # SSP2 partition n format 2 ^[[PnPnSTRINGu
20968 # SSP3 partition n format 3 ^[[PnPnu
20969 # ATR attribute (visual)
20972 # hide (blank) : ^[sH
20974 # inverse video : ^[sI
20979 # This covers the vip7800 and BQ3155-vip7800
20980 vip|Bull Questar 3155-7800,
20981 am, eslok, hs, km, mc5i, msgr, xenl, xon,
20982 cols#80, it#8, lines#24, vt#3, wsl#80,
20983 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
20984 cbt=\E[Z, clear=\E`, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20985 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
20986 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
20987 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
20988 hts=\Ep, ich1=\E[I, ind=\n, invis=\EsH,
20989 is2=\E[00u\E[<>001001024080024080u\E[01u,
20990 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
20991 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
20992 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
20993 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
20994 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
20995 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
20996 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
20997 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
20998 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
20999 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
21000 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
21001 mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI,
21002 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
21003 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
21004 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
21005 smul=\Es_, tbc=\E[N, tsl=\Ew,
21006 # normal screen, 8 bits, 132 columns terminal.
21007 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
21009 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
21010 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
21012 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
21013 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
21014 cols#132, lines#72, wsl#132,
21015 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
21020 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
21021 # that is smaller than the screen, and puts up a warning message
21022 # outside the window. Te erases the warning message, puts the
21023 # window back to be the whole screen, and puts the cursor at just
21024 # below the small window. I defined <cnorm> and <civis> to really turn
21025 # the cursor on and off, but I have taken this out since I don't
21026 # like the cursor being turned off when vi exits.
21027 cg7900|chromatics|chromatics 7900,
21030 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^],
21031 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
21032 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|,
21033 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
21035 rmso=\001C1\,\001c2\,,
21036 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
21037 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
21038 \001W0\,0\,79\,39\,,
21039 smso=\001C4\,\001c7\,, uc=^A^A_^A\0,
21041 #### Computer Automation
21044 ca22851|computer automation 22851,
21047 bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
21048 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n,
21049 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
21054 # This entry has correct padding and the undocumented "ri" capability
21055 cyb83|xl83|cybernex xl-83,
21058 bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
21059 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
21060 ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
21061 kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
21062 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
21063 cyb110|mdl110|cybernex mdl-110,
21066 bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
21067 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
21068 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
21069 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
21070 ht=\011$<43>, ich1=\016A\035$<3.5>,
21071 il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF,
21075 # Datapoint is gone. They used to be headquartered in Texas.
21076 # They created ARCnet, an Ethernet competitor that flourished for a while
21077 # in the early 1980s before 3COM got wise and cut its prices. The service
21078 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
21081 dp3360|datapoint|datapoint 3360,
21084 bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
21085 ed=^_, el=^^, home=^], ind=\n,
21087 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
21088 # The Datapoint 8242 Workstation was sold at least between 1985
21089 # and 1989. To make the terminal work with this entry, press
21090 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
21091 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
21092 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
21093 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
21094 # fact unusable because the strings sent by the terminal conflict
21095 # with other keys).
21096 # The terminal is capable of displaying "box draw" characters.
21097 # For each graphic character you must send 2 ESC's (\E\E) followed
21098 # by a control character as follows:
21099 # character meaning
21100 # ========= =======
21103 # ctrl-G bottom tee
21106 # ctrl-J top left corner
21107 # ctrl-K top right corner
21108 # ctrl-L bottom left corner
21109 # ctrl-M bottom right corner
21110 # ctrl-N horizontal line
21111 # ctrl-O vertical line
21112 # Unfortunately this cannot be fitted into the termcap/terminfo
21113 # description scheme.
21114 dp8242|datapoint 8242,
21117 bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
21118 cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z,
21119 ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C,
21120 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
21121 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
21122 kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea,
21123 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n,
21124 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
21125 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
21126 smso=\E^E, smul=\E^F,
21127 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
21130 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
21132 # These entries are DEC's official terminfos for its older terminals.
21133 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
21134 # Engineering for more information. Updated terminfos and termcaps
21135 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
21141 bel=^G, cr=\r, cub1=^H, cud1=\n,
21145 bel=^G, cr=\r, cub1=^H, cud1=\n,
21149 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21150 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n,
21154 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21155 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
21156 el=\EK, ht=^I, ind=\n, ri=\EI,
21157 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
21158 vt61|vt-61|vt61.5|dec vt61,
21160 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
21161 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
21162 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
21163 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
21166 # The gigi does standout with red!
21167 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
21168 gigi|vk100|dec gigi graphics terminal,
21171 bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H,
21172 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
21173 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
21174 el=\E[K, ht=^I, ind=\n,
21175 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
21176 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
21177 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
21178 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21179 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
21182 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
21183 # a PC differentiated from the IBM clones. It was a total, ludicrous,
21184 # grossly-overpriced failure (among other things, DEC's OS didn't include
21185 # a format program, so you had to buy pre-formatted floppies from DEC at
21186 # a hefty premium!).
21187 pro350|decpro|dec pro console,
21189 cols#80, it#8, lines#24,
21190 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
21191 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
21192 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
21193 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21194 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
21195 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
21196 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
21201 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
21202 dw2|decwriter|dw|decwriter II,
21205 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
21206 # \E(B Use U.S. character set (otherwise # => british pound !)
21207 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
21208 # \E[w 10 char/in pitch
21209 # \E[1;132 full width horizontal margins
21210 # \E[2g clear all tab stops
21212 # \E[66t 66 lines/page (for \f)
21213 # \E[1;66r full vertical page can be printed
21214 # \E[4g clear vertical tab stops
21215 # \E> disable alternate keypad mode (so it transmits numbers!)
21216 # \E[%i%p1%du set tab stop at column %d (origin == 1)
21217 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
21220 # The dw3 does standout with wide characters.
21222 dw3|la120|decwriter III,
21225 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
21226 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
21227 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
21229 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
21233 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
21234 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
21236 # These aren't official
21237 ln03|dec ln03 laser printer,
21240 bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
21241 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
21243 ln03-w|dec ln03 laser printer 132 cols,
21245 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
21246 kcud1=\n, nel=\r\n, use=ln03,
21248 #### Delta Data (dd)
21251 # Untested. The cup sequence is hairy enough that it probably needs work.
21252 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
21253 # There are BSD-derived termcap entries floating around for this puppy
21254 # that are *certainly* wrong.
21255 delta|dd5000|delta data 5000,
21258 bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y,
21259 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
21261 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n,
21263 #### Digital Data Research (ddr)
21266 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
21267 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
21269 cols#80, it#8, lines#24, vt#3,
21270 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
21271 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
21272 cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
21273 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
21274 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
21275 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
21276 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
21277 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
21278 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
21279 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
21280 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
21283 #### Evans & Sutherland
21286 # Jon Leech <leech@cs.unc.edu> tells us:
21287 # The ps300 was the Evans & Sutherland Picture System 300, a high
21288 # performance 3D vector graphics system with a bunch of specialized hardware.
21289 # Approximate date of release was 1982 (early 80s, anyway), and it had several
21290 # evolutions including (limited) color versions such as the PS330C. PS300s
21291 # were effectively obsolete by the late 80s, replaced by raster graphics
21292 # systems, although specialized applications like molecular modeling
21293 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
21294 # are out of production, though of course E&S is very much alive (in 1996).
21295 # (ps300: changed ":pt@:" to "it@" -- esr)
21297 ps300|Picture System 300,
21300 rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
21302 #### General Electric (ge)
21305 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
21308 bel=^G, cr=\r, cud1=\n, ind=\n,
21310 #### Heathkit/Zenith
21313 # Here is a description of the H19 DIP switches:
21316 # 0-3 = baud rate as follows:
21321 # 0 1 0 1 1200 baud
21322 # 1 0 0 0 2400 baud
21323 # 1 0 1 0 4800 baud
21324 # 1 1 0 0 9600 baud
21325 # 1 1 0 1 19.2K baud
21327 # 4 = parity (0 = no parity)
21328 # 5 = even parity (0 = odd parity)
21329 # 6 = stick parity (0 = normal parity)
21330 # 7 = full duplex (0 = half duplex)
21333 # 0 = block cursor (0 = underscore cursor)
21334 # 1 = no key click (0 = keyclick)
21335 # 2 = wrap at end of line (0 = no wrap)
21336 # 3 = auto LF on CR (0 = no LF on CR)
21337 # 4 = auto CR on LF (0 = no CR on LF)
21338 # 5 = ANSI mode (0 = VT52 mode)
21339 # 6 = keypad shifted (0 = keypad unshifted)
21340 # 7 = 50Hz refresh (1 = 60Hz refresh)
21342 # Factory Default settings are as follows:
21344 # S401 1 0 0 0 1 1 0 0
21345 # S402 0 0 0 0 0 0 0 0
21346 # (h19: I added <rmam>/<smam> based on the init string;
21347 # also added empty <acsc> to suppress a tic warning -- esr)
21348 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
21349 OTbs, am, mir, msgr,
21350 cols#80, it#8, lines#24,
21351 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
21352 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
21353 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
21354 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n,
21355 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
21356 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
21357 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
21358 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
21359 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
21360 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
21361 h19-bs|heathkit w/keypad shifted,
21362 rmkx=\Eu, smkx=\Et, use=h19-b,
21363 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
21364 rmkx=\Eu, smkx=\Et, use=h19-u,
21365 # (h19: merged in <ip> from BSDI hp19-e entry>;
21366 # also added empty <acsc> to suppress a tic warning --esr)
21367 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
21368 # Tim tells us that:
21369 # I have an old Zenith-19 terminal at home that still gets a lot of use.
21370 # This terminal suffers from the same famous insert-mode padding lossage
21371 # that has been acknowledged for the Z29 terminal. Emacs is nearly
21372 # unusable on this box, since even a half-scroll up or down the window
21373 # causes flaming terminal death.
21375 # On the Z19, the only way I have found around this problem is to remove
21376 # the :al: and :dl: entries entirely. No amount of extra padding will
21377 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
21378 # makes Emacs a little slower, but it remains in the land of the living.
21380 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
21381 OTbs, am, eslok, hs, mir, msgr,
21382 cols#80, it#8, lines#24,
21383 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
21384 clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21385 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
21386 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n,
21387 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21388 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
21389 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
21390 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
21391 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
21392 h19-u|heathkit with underscore cursor,
21393 cnorm@, cvvis@, use=h19-b,
21394 h19-g|h19g|heathkit w/block cursor,
21395 cnorm=\Ex4, cvvis@, use=h19-b,
21396 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
21398 dl1=\EM, il1=\EL, use=h19,
21400 # The major problem with the Z29 is that it requires more padding than the Z19.
21402 # The problem with declaring an H19 to be synonymous with a Z29 is that
21403 # it needs more padding. It especially loses if a program attempts
21404 # to put the Z29 into insert mode and insert text at 9600 baud. It
21405 # even loses worse if the program attempts to insert tabs at 9600
21406 # baud. Adding padding to text that is inserted loses because in
21407 # order to make the Z29 not die, one must add so much padding that
21408 # whenever the program tries to use insert mode, the effective
21409 # rate is about 110 baud.
21411 # What program would want to put the terminal into insert mode
21412 # and shove stuff at it at 9600 baud you ask?
21414 # Emacs. Emacs seems to want to do the mathematically optimal
21415 # thing in doing a redisplay rather than the practical thing.
21416 # When it is about to output a line on top of a line that is
21417 # already on the screen, instead of just killing to the end of
21418 # the line and outputting the new line, it compares the old line
21419 # and the new line and if there are any similarities, it
21420 # constructs the new line by deleting the text on the old line
21421 # on the terminal that is already there and then inserting new
21422 # text into the line to transform it into the new line that is
21423 # to be displayed. The Z29 does not react kindly to this.
21425 # But don't cry for too long.... There is a solution. You can make
21426 # a termcap entry for the Z29 that says the Z29 has no insert mode.
21427 # Then Emacs cannot use it. "Oh, no, but now inserting into a
21428 # line will be really slow", you say. Well there is a sort of a
21429 # solution to that too. There is an insert character option on
21430 # the Z29 that will insert one character. Unfortunately, it
21431 # involves putting the terminal into ansi mode, inserting the
21432 # character, and changing it back to H19 mode. All this takes 12
21433 # characters. Pretty expensive to insert one character, but it
21434 # works. Either Emacs doesn't try to use its inserting hack when
21435 # it's only given an insert character ability or the Z29 doesn't
21436 # require padding with this (the former is probably more likely,
21437 # but I haven't checked it out).
21438 # (z29: added empty <acsc> to suppress a tic warning, merged in
21439 # status line capabilities from BRL entry --esr)
21440 z29|zenith29|z29b|zenith z29b,
21441 OTbs, OTpt, am, eslok, hs, mir, msgr,
21442 OTkn#10, cols#80, lines#24,
21443 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
21444 cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
21445 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
21446 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
21447 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
21448 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
21449 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21450 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
21451 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
21452 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
21453 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
21454 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
21455 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
21456 # the world is stable. <rs1> causes the terminal to be reset to the state
21457 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
21458 # cursor, bc -> block cursor.
21459 # From: Mike Meyers
21460 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
21461 # looks vt100-compatible -- esr)
21462 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
21463 OTbs, OTpt, am, eslok, hs, mir, msgr,
21464 OTkn#10, cols#80, it#8, lines#24,
21465 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
21466 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21467 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
21468 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
21469 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
21470 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
21471 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
21472 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
21473 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
21474 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
21475 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
21476 mc0=\E#7, nel=\r\ED, rc=\E[r, rev=\E[7m, ri=\EM,
21477 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
21478 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
21480 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
21481 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
21482 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
21483 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
21486 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
21487 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
21490 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
21491 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
21494 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
21495 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
21496 am, eslok, hs, mc5i, mir, msgr, xon,
21498 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
21499 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
21500 clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
21501 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21502 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
21503 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
21504 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
21505 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
21506 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
21507 ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
21508 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
21509 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
21510 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
21511 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
21512 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
21513 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
21514 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
21515 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
21516 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
21518 # From: Brad Brahms <Brahms@USC-ECLC>
21519 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
21520 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
21521 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
21522 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
21523 OTbs, OTpt, mir, msgr,
21524 OTkn#10, cols#80, it#8, lines#24,
21525 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
21526 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
21527 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
21528 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
21529 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
21530 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
21531 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
21532 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
21533 smir=\E@, smso=\Ep,
21534 p19|h19-b with il1/dl1,
21535 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
21536 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
21537 # (ztx: removed duplicate :sr: -- esr)
21538 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
21539 OTbs, am, eslok, hs,
21540 cols#80, it#8, lines#24,
21541 clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
21542 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
21543 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
21544 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
21545 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
21546 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
21547 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
21548 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
21550 #### IMS International (ims)
21552 # There was a company called IMS International located in Carson City,
21553 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
21554 # bus/Z80 hardware and a line of terminals called Ultimas.
21557 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
21558 ims950-b|bare ims950 no init string,
21560 # (ims950: removed obsolete ":ko@:" -- esr)
21561 ims950|ims televideo 950 emulation,
21563 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21564 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
21565 # (ims950-rv: removed obsolete ":ko@:" -- esr)
21566 ims950-rv|ims tvi950 rev video,
21568 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21569 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
21570 ims-ansi|ultima2|ultimaII|IMS Ultima II,
21572 cols#80, it#8, lines#24,
21573 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
21574 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
21575 ht=^I, if=/usr/share/tabset/vt100,
21576 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
21577 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
21578 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
21581 #### Intertec Data Systems
21583 # I think this company is long dead as of 1995. They made an early CP/M
21584 # micro called the "Intertec Superbrain" that was moderately popular,
21585 # then sank out of sight.
21588 superbrain|intertec superbrain,
21591 OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
21592 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
21593 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U,
21594 kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
21595 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
21596 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
21597 # and the reverse is actually true. Try it. -- esr)
21598 intertube|intertec|Intertec InterTube,
21601 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
21602 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
21603 ind=\n, rmso=\E0@, smso=\E0P,
21604 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
21605 # are typing and a command comes in, the keystrokes you type get interspersed
21606 # with the command and it messes up
21607 intertube2|intertec data systems intertube 2,
21609 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
21610 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
21611 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
21613 #### Ithaca Intersystems
21615 # This company made S100-bus personal computers long ago in the pre-IBM-PC
21616 # past. They used to be reachable at:
21618 # Ithaca Intersystems
21619 # 1650 Hanshaw Road
21620 # Ithaca, New York 14850
21622 # However, the outfit went bankrupt years ago.
21625 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
21626 # These entries were written (originally in termcap syntax) by Brian Yandell
21627 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
21628 # University of Wisconsin.
21630 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
21631 # removed <if=/usr/share/tabset/init.graphos> and
21632 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
21633 graphos|graphos III,
21635 cols#80, it#8, lines#24,
21636 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
21637 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
21638 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21639 cuu=\E[%p1%dA, cuu1=\E[A,
21640 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
21641 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
21642 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21643 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
21644 kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
21645 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
21646 smir=\E[4h, smso=\E[7m,
21647 graphos-30|graphos III with 30 lines,
21649 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
21653 # These people used to be reachable at:
21656 # 1393 Main Street,
21657 # Waltham, MA 02154
21658 # Vox: (617)-890-5796.
21660 # However, if you call that number today you'll get an insurance company.
21661 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
21662 # 26 Feb 1997 that says:
21664 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
21665 # for ~7 years. Modgraph still in business. Products are rugged laptop and
21666 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
21667 # panel-mount etc). I can be emailed at sonfour@aol.com
21669 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
21670 # dated 1984. According to the manual, it featured Tek 4010/4014
21671 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
21674 modgraph|mod24|modgraph terminal emulating vt100,
21677 cvvis=\E\^9;0s\E\^7;1s,
21678 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
21679 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
21680 \E\^11;81s\E\^11;89s,
21681 rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
21682 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
21683 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
21685 cols#80, it#8, lines#24,
21686 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
21687 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
21688 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
21689 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
21690 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
21691 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
21692 1s\E\^9;1s\E\^27;1,
21695 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
21696 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
21697 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
21698 # mark and using delete-to-killbuffer work correctly. However, we would
21699 # like normal mode of operation to be using a Modgraph with 48 line setting.
21700 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
21701 # the setting mark and delete-to-killbuffer results in the deletion of only
21702 # the line the mark is set on.
21703 # We've discovered that the delete-to-killbuffer works correctly
21704 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
21705 # the first line disappears but a ctrl-l shows that it did work
21707 modgraph48|mod|Modgraph w/48 lines,
21708 OTbs, OTpt, am, xenl,
21709 cols#80, it#8, lines#48, vt#3,
21710 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
21711 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
21712 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
21713 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
21714 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
21715 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
21716 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
21717 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21718 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
21719 smso=\E[7m, smul=\E[4m,
21721 #### Morrow Designs
21723 # This was George Morrow's company. They started in the late 1970s making
21724 # S100-bus machines. They used to be reachable at:
21727 # 600 McCormick St.
21728 # San Leandro, CA 94577
21730 # but they're long gone now (1995).
21733 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
21734 # Jeff's specimen was dated June 1984.
21735 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
21736 mt70|mt-70|Morrow MD-70; native Morrow mode,
21737 am, mir, msgr, xon,
21738 cols#80, it#8, lines#24,
21739 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
21740 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H,
21741 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
21742 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
21743 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
21744 ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
21745 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
21746 kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
21747 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
21748 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
21749 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
21750 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
21751 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
21752 smul=\EG1, tbc=\E0, use=adm+sgr,
21757 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
21759 ex155|Motorola Exorterm 155,
21761 OTkn#5, OTug#1, cols#80, lines#24,
21762 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
21763 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
21764 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
21765 kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
21766 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
21770 # This company is still around in 1995, manufacturing point-of-sale systems.
21772 omron|Omron 8025AG,
21775 bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA,
21776 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
21777 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
21781 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
21782 # were competition for things like the Tektronix 4025.
21785 # Ramtek 6221 from BRL, probably by Doug Gwyn
21786 # The following SET-UP modes are assumed for normal operation:
21787 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
21788 # NEWLINE_OFF 80_COLUMNS
21789 # Other SET-UP modes may be set for operator convenience or communication
21790 # requirements; I recommend
21791 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
21792 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
21793 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
21794 # Note that the Control-E key is useless on this brain-damaged terminal. No
21795 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
21796 rt6221|Ramtek 6221 80x24,
21797 OTbs, OTpt, msgr, xon,
21798 OTkn#4, cols#80, it#8, lines#24, vt#3,
21799 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
21800 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r,
21801 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21802 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
21803 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
21804 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
21805 hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21806 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
21807 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
21808 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
21809 rmso=\E[m, rmul=\E[m,
21810 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
21811 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
21813 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
21814 smul=\E[4m, tbc=\E[3g,
21815 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
21816 rt6221-w|Ramtek 6221 160x48,
21817 cols#160, lines#48,
21818 ll=\E[48;1H, use=rt6221,
21823 # RCA VP3301 or VP3501
21824 rca|rca vp3301/vp3501,
21827 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
21828 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
21834 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
21835 # The following SET-UP modes are assumed for normal operation:
21836 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
21837 # ONLINE ANSI CURSOR_VISIBLE
21838 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
21839 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
21840 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
21841 # For use with graphics software, all graphics modes should be set to factory
21842 # default. Other SET-UP modes may be set for operator convenience or
21843 # communication requirements. No delays are specified; use "stty ixon -ixany"
21844 # to enable DC3/DC1 flow control!
21845 # I commented out the scrolling capabilities since they are too slow.
21846 hirez100|Selanar HiREZ-100,
21847 OTbs, OTpt, mir, msgr, xon,
21848 OTkn#4, cols#80, it#8, lines#48, vt#3,
21849 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
21850 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
21851 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21852 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
21853 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
21854 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
21855 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
21856 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
21857 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
21858 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
21859 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21860 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
21861 9l\E[r\E[m\E(B\017\E)0\E>,
21862 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
21863 smul=\E[4m, tbc=\E[3g,
21864 hirez100-w|Selanar HiREZ-100 in 132-column mode,
21865 cols#132, use=hirez100,
21870 # From University of Wisconsin
21871 vsc|Signetics Vsc Video driver by RMC,
21873 cols#80, it#8, lines#26,
21874 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
21875 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
21876 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s,
21877 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
21881 # Alan Frisbie <frisbie@flying-disk.com> writes:
21883 # As you may recall, the Soroc logo consisted of their name,
21884 # with the letter "S" superimposed over an odd design. This
21885 # consisted of a circle with a slightly smaller 15 degree (approx.)
21886 # wedge with rounded corners inside it. The color was sort of
21887 # a metallic gold/yellow.
21889 # If I had been more of a beer drinker it might have been obvious
21890 # to me, but it took a clue from their service department to make
21891 # me exclaim, "Of course!" The circular object was the top of
21892 # a beer can (the old removable pop-top style) and "Soroc" was an
21893 # anagram for "Coors".
21895 # I can just imagine the founders of the company sitting around
21896 # one evening, tossing back a few and trying to decide what to
21897 # call their new company and what to use for a logo.
21900 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
21901 soroc120|iq120|soroc|soroc iq120,
21902 clear=\E*$<2>, cud1=\n, ed=\EY, el=\ET, kcub1=^H, kcud1=\n,
21903 kcuf1=^L, kcuu1=^K, use=adm3a,
21904 soroc140|iq140|soroc iq140,
21907 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21908 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
21909 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n,
21910 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
21911 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
21912 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?,
21913 rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A,
21915 #### Southwest Technical Products
21917 # These guys made an early personal micro called the M6800.
21918 # The ct82 was probably its console terminal.
21921 # (swtp: removed obsolete ":bc=^D:" -- esr)
21922 swtp|ct82|southwest technical products ct82,
21925 bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
21926 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
21927 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
21928 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
21929 \017\035\027\022\011,
21930 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
21934 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
21936 # Synertek used to make ICs, various 6502-based single-board process
21937 # control and hobbyist computers, and assorted peripherals including a
21938 # series of small inexpensive terminals (I think they were one of the
21939 # first to have a "terminal-on-a-keyboard", where the terminal itself
21940 # was only slightly larger than the keyboard).
21942 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
21943 # was a 40x24 terminal that could connect to a standard TV through a
21944 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
21945 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
21946 # I have a KTM-2/80 still in working order. The KTM-2s had fully
21947 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
21948 # ROM and 2 ROMs as character generators. They were incredibly simple,
21949 # and I've never had any problems with mine (witness the fact that mine
21950 # was made in 1981 and is still working great... I've blown the video
21951 # output transistor a couple of times, but it's a 2N2222 :-)
21953 # The KTM-3 (which is what is listed in the terminfo file) was their
21954 # attempt at putting a KTM-2 in a box (and some models came with a
21955 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
21956 # control and escape sequences are very different. The KTM-3 was always
21957 # real broken, at least according to the folks I've talked to about it.
21959 # The padding in the entry is probably off--these terminals were very
21960 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
21961 # anyone with any sanity replaced the ROMs with something that provided
21962 # a reasonable subset of VT100 functionality, since the usual ROMs were
21963 # obviously very primitive... oh, you could get an upgraded ROM from
21964 # Synertek for some incredible amount of money, but what hacker with an
21965 # EPROM burner would do that? :)
21967 # Sorry I don't have any contact info; I believe they were located in
21968 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
21969 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
21970 # business these days.
21973 # Tested, seems to work fine with vi.
21974 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
21977 clear=^Z, cub1=^H, cuf1=^L,
21978 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
21980 #### Tab Office Products
21982 # TAB Products Co. - Palo Alto, California
21983 # Electronic Office Products,
21984 # 1451 California Avenue 94304
21986 # I think they're out of business.
21989 # The tab 132 uses xon/xoff, so no padding needed.
21990 # <smkx>/<rmkx> have nothing to do with arrow keys.
21991 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
21992 # Seems to be no way to get rid of status line.
21993 # The manual for this puppy was dated June 1981. It claims to be VT52-
21994 # compatible but looks more vt100-like.
21995 tab132|tab|tab132-15|tab 132/15,
21997 OTdN@, cols#80, lines#24, lm#96,
21998 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
21999 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
22000 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
22002 tab132-w|tab132 in wide mode,
22004 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
22005 tab132-rv|tab132 in reverse-video mode,
22006 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
22007 tab132-w-rv|tab132 in reverse-video/wide mode,
22008 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
22013 # Research Incorporated
22014 # 6425 Flying Cloud Drive
22015 # Eden Prairie, MN 55344
22016 # Vox: (612)-941-3300
22018 # The Teleray terminals were all discontinued in 1992-93. RI still services
22019 # and repairs these beasts, but no longer manufactures them. The Teleray
22020 # people believe that all the types listed below are very rare now (1995).
22021 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
22022 # Model 100) that were ANSI-compatible.
22024 # Note two things called "teleray". Reorder should move the common one
22025 # to the front if you have either. A dumb teleray with the cursor stuck
22026 # on the bottom and no obvious model number is probably a 3700.
22029 t3700|dumb teleray 3700,
22032 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
22033 t3800|teleray 3800 series,
22035 cols#80, it#8, lines#24,
22036 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22037 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
22038 home=\EH, ht=^I, ind=\n, ll=\EY7\s,
22039 t1061|teleray|teleray 1061,
22040 OTbs, am, km, xhp, xt,
22041 cols#80, it#8, lines#24, xmc#1,
22042 bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22043 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
22044 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
22045 ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>,
22046 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
22047 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
22048 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
22049 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
22051 t1061f|teleray 1061 with fast PROMs,
22052 dl1=\EM, il1=\EL, ip@, use=t1061,
22053 # "Teleray Arpa Special", officially designated as
22054 # "Teleray Arpa network model 10" with "Special feature 720".
22055 # This is the new (1981) fast microcode updating the older "arpa" proms
22056 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
22057 # converts the keypad to programmable function keys, and has other goodies.
22058 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
22059 # programs handle such lossage properly.
22060 # Note: this is NOT the old termcap's "t1061f with fast proms."
22061 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
22062 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
22063 t10|teleray 10 special,
22065 cols#80, it#8, lines#24, xmc#2,
22066 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
22067 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
22068 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
22069 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
22071 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
22072 # back/forth words. Put the function keys (f1-f10) where they can be
22073 # found, and turn off the other magic keys along the top row, except
22074 # for line/local. Do the magic appropriate to make the page shifts work.
22075 # Also toggle ^S/^Q for those of us who use Emacs.
22077 am, da, db, mir, xhp, xt,
22079 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
22080 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
22081 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
22082 ind=\n, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
22083 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
22084 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
22085 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
22086 smso=\E[7m, smul=\E[4m,
22088 #### Texas Instruments (ti)
22091 # The Silent 700 was so called because it was built around a quiet thermal
22092 # printer. It was portable, equipped with an acoustic coupler, and pretty
22093 # neat for its day.
22094 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
22097 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
22100 # Texas Instruments 916 VDT 7 bit control mode
22102 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
22104 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
22105 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
22106 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
22107 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
22108 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
22109 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
22110 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
22111 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
22112 kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~,
22113 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
22114 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
22115 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
22116 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
22117 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
22120 # Texas Instruments 916 VDT 8 bit control mode
22122 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
22123 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
22124 kcuu1=\233A, kdch1=\233P, kent=\n, kf1=\23317~,
22125 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
22126 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
22127 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
22128 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
22130 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
22132 ti916-132|Texas Instruments 916 VDT vt220 132 column,
22133 cols#132, use=ti916,
22135 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
22137 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
22138 cols#132, use=ti916-8,
22139 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
22141 cols#80, it#8, lines#24,
22142 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
22143 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
22144 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
22145 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
22146 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
22147 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22148 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
22149 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
22150 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
22151 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
22152 smul=\E[4m, tbc=\E[3g,
22153 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
22155 cols#80, it#8, lines#24,
22156 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
22157 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
22158 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
22159 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
22160 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
22161 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22162 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
22163 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
22164 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
22165 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
22166 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
22167 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
22168 cols#132, use=ti924,
22169 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
22170 cols#132, use=ti924-8,
22171 ti931|Texas Instruments 931 VDT,
22174 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED,
22175 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
22176 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
22177 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
22178 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
22179 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
22180 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
22181 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
22182 sgr0=\E4@, smso=\E4A, smul=\E4D,
22183 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
22184 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
22185 # (ti926-8: I corrected this from the broken SCO entry -- esr)
22186 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
22187 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
22188 ti_ansi|basic entry for ti928,
22189 am, bce, eo, xenl, xon,
22190 colors#8, cols#80, it#8, lines#25, pairs#64,
22191 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
22192 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
22193 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
22194 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
22195 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
22196 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
22197 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
22198 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
22199 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
22200 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
22201 smso=\E[7m, smul=\E[4m,
22203 # 928 VDT 7 bit control mode
22205 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
22206 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
22207 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
22208 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
22209 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
22210 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
22212 # 928 VDT 8 bit control mode
22214 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
22215 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
22216 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
22217 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
22218 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
22219 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
22220 kpp=\233T, kprt=\23335~, use=ti_ansi,
22225 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
22226 # had just <smso>=\EG6 which I think means standout was supposed to be
22227 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
22228 # <invis> might work-- esr)
22229 zen30|z30|zentec 30,
22232 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
22233 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
22234 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
22235 il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
22236 smul@, use=adm+sgr,
22237 # (zen50: this had extension capabilities
22238 # :BS=^U:CL=^V:CR=^B:
22239 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
22240 # which were also in the original entry -- esr)
22241 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
22242 zen50|z50|zentec zephyr,
22244 cols#80, lines#24, xmc#1,
22245 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
22246 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
22247 invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
22248 rmul@, smul@, use=adm+sgr,
22250 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
22251 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
22254 blink=\EM", clear=\EH\EJ, cnorm=\EP,
22255 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n,
22256 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
22257 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
22258 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
22259 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
22260 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
22261 smso=\EM$, smul=\EM0,
22263 ######## OBSOLETE UNIX CONSOLES
22266 #### Apollo consoles
22268 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
22269 # labeled HP700s now.
22272 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
22273 apollo|apollo console,
22276 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
22277 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
22278 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
22279 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
22280 smso=\ES, smul=\EU, vpa=\EO+\s,
22282 # We don't know whether or not the apollo guys replicated DEC's firmware bug
22283 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
22284 # both these capabilities.
22285 apollo_15P|apollo 15 inch display,
22286 rmir@, smir@, use=vt132,
22287 apollo_19L|apollo 19 inch display,
22288 rmir@, smir@, use=vt132,
22289 apollo_color|apollo color display,
22290 rmir@, smir@, use=vt132,
22294 # This actually describes the generic SVr4 display driver for Intel boxes.
22295 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
22296 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
22297 att6386|at386|386at|AT&T WGS 6386 console,
22299 cols#80, it#8, lines#25,
22300 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
22301 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
22302 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub=\E[%p1%dD,
22303 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
22304 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
22305 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
22306 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
22307 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
22308 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
22309 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
22310 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
22311 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
22312 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
22313 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
22314 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
22315 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
22317 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
22318 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
22319 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
22320 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
22321 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
22322 pc6300plus|AT&T 6300 plus,
22325 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
22326 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H, cud1=\E[B,
22327 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
22328 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
22329 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n,
22330 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
22331 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
22332 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
22333 nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22334 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
22336 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
22338 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
22339 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
22340 # is broken. All the special key sequences are broken, making it unusable
22341 # with Emacs. The problem stems from the following:
22343 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
22344 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
22345 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
22346 # uses resizable terminal windows, but the bundled terminal program always
22347 # uses an 80x24 window (and doesn't support seem to support a 132-column
22350 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
22351 # library which was a superset of SVr3.5 curses (called tam, for "terminal
22352 # access method".) tam includes support for real, overlapping windows,
22353 # onscreen function key labels, and bitmap graphics. But since the primary
22354 # user interface on the UNIX PC was a GUI program (ua, for "user
22355 # assistant",) and remote administration was considered important for the
22356 # machine, tam also supported VT100-compatible terminals attached to the
22357 # serial port or used across the StarLan network. To simulate the extra keys
22358 # not present on a VT100, users could press ESC and a two-letter sequence,
22359 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
22360 # however, were not the same as those sent by the actual Undo key. The
22361 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
22362 # (If you're interested in adding some of the tam calls to ncurses, btw, I
22363 # have the full documentation and several programs which use tam. It also
22364 # used an extended terminfo format to describe key sequences, special
22365 # highlighting modes, etc.)
22367 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
22368 # there are two sequences for every key-modifier combination (local keyboard
22369 # sequence and remote "VT100" sequence.) But I doubt many people are trying
22370 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
22371 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
22372 # seem to have been built from the manual describing the VT100 sequences.
22373 # This means it doesn't work for a real live UNIX PC.
22375 # FONTS: The UNIX PC also has a strange interpretation of "alternate
22376 # character set". Rather than the VT100 graphics you might expect, it allows
22377 # up to 8 custom fonts to be loaded at any given time. This means that
22378 # programs expecting VT100 graphics will usually be disappointed. For this
22379 # reason I have disabled the smacs/rmacs sequences, but they could easily be
22380 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
22381 # manpage), should you wish to do so:
22383 # SGR10 - Select font 0 - ESC [ 10 m or SO
22384 # SGR11 - Select font 1 - ESC [ 11 m or SI
22385 # SGR12 - Select font 2 - ESC [ 12 m
22387 # SGR17 - Select font 7 - ESC [ 17 m
22389 # Graphics for line drawing are not reliably found at *any* character
22390 # location because the UNIX PC has dynamically reloadable fonts. I use font
22391 # 0 for regular text and font 1 for italics, but this is by no means
22392 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
22394 # MISC: The cursor visible/cursor invisible sequences were swapped in the
22395 # distributed terminfo.
22397 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
22398 # the UNIX PC terminfo entry. The modified version works great with Lynx,
22399 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
22400 # attached by serial cable. In Emacs, even the Undo key works, and many
22401 # applications can now use the F1-F8 keys.
22404 # Terminfo entry for the AT&T Unix PC 7300
22405 # from escape(7) in Unix PC 7300 Manual.
22406 # Somewhat similar to a vt100-am (but different enough
22407 # to redo this from scratch.)
22409 # /***************************************************************
22411 # * FONT LOADING PROGRAM FOR THE UNIX PC
22413 # * This routine loads a font defined in the file ALTFONT
22414 # * into font memory slot #1. Once the font has been loaded,
22415 # * it can be used as an alternative character set.
22417 # * The call to ioctl with the argument WIOCLFONT is the key
22418 # * to this routine. For more information, see window(7) in
22419 # * the PC 7300 documentation.
22420 # ***************************************************************/
22421 # #include <string.h> /* needed for strcpy call */
22422 # #include <sys/window.h> /* needed for ioctl call */
22423 # #define FNSIZE 60 /* font name size */
22424 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
22426 # * The file /usr/lib/wfont/special.8.ft comes with the
22427 # * standard PC software. It defines a graphics character set
22428 # * similar to that of the Teletype 5425 terminal. To view
22429 # * this or other fonts in /usr/lib/wfont, use the command
22430 # * cfont <filename>. For further information on fonts see
22431 # * cfont(1) in the PC 7300 documentation.
22434 # struct altfdata /* structure for alt font data */
22436 # short altf_slot; /* memory slot number */
22437 # char altf_name[FNSIZE]; /* font name (file name) */
22441 # int wd; /* window in which altfont will be */
22442 # struct altfdata altf;
22443 # altf.altf_slot=1;
22444 # strcpy(altf.altf_name,ALTFONT);
22445 # for (wd =1; wd < 12; wd++) {
22446 # ioctl(wd, WIOCLFONT,&altf);
22450 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
22451 # they're confirmed by the man page for the System V display---esr)
22453 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
22455 cols#80, it#8, lines#24,
22456 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
22457 clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD,
22458 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
22459 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
22460 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
22461 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
22462 il1=\E[L, ind=\n, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
22463 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
22464 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
22465 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
22466 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
22467 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
22468 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
22469 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
22470 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
22471 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
22472 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
22473 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
22474 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
22475 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
22476 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
22477 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
22480 #### Convergent Technology
22482 # Burroughs bought Convergent shortly before it merged with Univac.
22483 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
22484 # from 1991 or earlier).
22487 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
22488 # (aws: removed unknown :dn=^K: -- esr)
22489 aws|Convergent Technologies AWS workstation under UTX and Xenix,
22491 OTug#0, cols#80, lines#28, xmc#0,
22492 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=,
22493 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
22494 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
22495 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
22496 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
22497 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
22499 awsc|Convergent Technologies AWS workstation under CTOS,
22501 OTug#0, cols#80, lines#24, xmc#0,
22502 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
22503 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
22504 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
22505 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
22511 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
22512 # The digital uVax II's had a graphic display called a qdss. It was
22513 # supposed to be a high performance graphic accelerator, but it was
22514 # late to market and barely appeared before faster dumb frame buffers
22515 # appeared. I have only used this display while running X11. However,
22516 # during bootup, it was in text mode, and probably had a terminal emulator
22517 # within it. And that is what your termcap entry is for. In graphics
22518 # mode the screen size is 1024x864 pixels.
22519 qdss|qdcons|qdss glass tty,
22521 cols#128, lines#57,
22522 clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L,
22523 cup=\E=%p1%c%p2%c, cuu1=^K,
22525 #### Fortune Systems consoles
22527 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
22528 # in their day; I (esr) used one myself for a year or so around 1984.
22529 # They had no graphics, though, and couldn't compete against Suns and
22533 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
22534 # (This had extension capabilities
22535 # :rv=\EH:re=\EI:rg=0:GG=0:\
22536 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
22537 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
22538 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
22539 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
22540 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
22541 # to force both magic cookie glitches off. Once upon a time, I
22542 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
22543 # function keys; thus the "Al" value for HM was certainly an error. I renamed
22544 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
22545 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
22546 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
22547 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
22548 fos|fortune|Fortune system,
22551 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
22552 clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>,
22553 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
22554 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
22555 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
22556 ich1=\034Q$<5>, il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H,
22557 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
22558 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
22559 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
22560 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH,
22561 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
22562 smso=^\H`, smul=^\HP,
22564 #### Masscomp consoles
22566 # Masscomp has gone out of business. Their product line was purchased by
22567 # comany in Georgia (US) called "XS International", parts and service may
22568 # still be available through them.
22571 # (masscomp: ":MT:" changed to ":km:"; -- esr)
22572 masscomp|masscomp workstation console,
22574 cols#80, it#8, lines#24,
22575 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
22576 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22577 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
22578 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
22579 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
22580 masscomp1|masscomp large screen version 1,
22581 cols#104, lines#36, use=masscomp,
22582 masscomp2|masscomp large screen version 2,
22583 cols#64, lines#21, use=masscomp,
22588 # OSF/1 1.1 Snapshot 2
22589 pmcons|pmconsole|PMAX console,
22591 cols#128, lines#57,
22592 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I,
22593 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
22594 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
22596 #### Other consoles
22597 # The following is a version of the ibm-pc entry distributed with PC/IX,
22598 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
22599 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
22600 # (the former is untrue, and the latter failed under UCB/man); standout and
22601 # underline modes have been added. Note: this entry describes the "native"
22602 # capabilities of the PC monochrome display, without ANY emulation; most
22603 # communications packages (but NOT PC/IX connect) do some kind of emulation.
22604 pcix|PC/IX console,
22607 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
22608 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
22609 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
22612 # (ibmpcx: this entry used to be known as ibmx.
22613 # It formerly included the following extension capabilities:
22614 # :GC=b:GL=v:GR=t:RT=^J:\
22615 # :GH=\E[196g:GV=\E[179g:\
22616 # :GU=\E[193g:GD=\E[194g:\
22617 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
22618 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
22619 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
22620 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
22621 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
22622 # what was there before. -- esr)
22623 ibmpcx|xenix|ibmx|IBM PC xenix console display,
22626 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
22627 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22628 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
22629 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
22630 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
22631 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
22633 ######## OTHER OBSOLETE TYPES
22635 # These terminals are *long* dead -- these entries are retained for
22636 # historical interest only.
22639 #### Obsolete non-ANSI software emulations
22642 # CTRM terminal emulator
22643 # 1. underlining is not allowed with colors: first, is is simulated by
22644 # black on white, second, it disables background color manipulations.
22645 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
22646 # so we have to save their status in the static registers A, B and H
22647 # respectively, to be able to restore them when color changes
22648 # (because any color change turns off ALL attributes)
22649 # 3. <bold> and <rev> sequences alternate modes,
22650 # rather than simply entering them. Thus we have to check the
22651 # static register B and H to determine the status, before sending the
22653 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
22654 # and then reset colors
22655 # 5. implementation of the protect mode would badly penalize the performance.
22656 # we would have to use \E&bn sequence to turn off colors (as well as all
22657 # other attributes), and keep the status of protect mode in yet another
22658 # static variable. If someone really needs this mode, they would have to
22659 # create another terminfo entry.
22660 # 6. original color-pair is white on black.
22661 # store the information about colors into static registers
22662 # 7. set foreground color. it performs the following steps.
22663 # 1) turn off all attributes
22664 # 2) turn on the background and video attributes that have been turned
22665 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
22666 # 3) turn on foreground attributes
22667 # 4) store information about foreground into U,V,W static registers
22668 # 8. turn on background: similar to turn on foreground above
22669 ctrm|C terminal emulator,
22671 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
22672 pairs#63, pb#19200, vt#6,
22673 bel=^G, blink=\E&dA%{1}%PA,
22674 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
22675 clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22676 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
22677 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
22678 il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
22679 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
22680 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
22681 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
22682 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
22684 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
22685 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
22686 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
22687 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
22688 %{4}%&%t\E&br%{1}%e%{0}%;%PX,
22689 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
22690 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
22691 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
22692 %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
22693 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
22694 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
22696 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
22697 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
22699 # gs6300 - can't use blue foreground, it clashes with underline;
22700 # it's simulated with cyan
22701 # Bug: The <op> capability probably resets attributes.
22702 # (gs6300: commented out <rmln> (no <smln>) --esr)
22703 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
22704 am, bce, msgr, xon,
22705 colors#8, cols#80, it#8, lines#24, pairs#63,
22706 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
22708 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
22709 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
22710 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22711 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
22712 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
22713 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
22714 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
22715 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
22716 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
22717 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
22718 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
22719 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
22720 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
22722 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
22723 # MS-Kermit with Heath-19 emulation mode enabled
22724 # (h19k: changed ":pt@:" to ":it@"
22725 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
22730 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
22731 # Software (formerly Peripherals Computers & Supplies, Inc) of
22732 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
22733 # also be reached at support@synergy.com.
22734 versaterm|versaterm vt100 emulator for the Macintosh,
22736 cols#80, it#8, lines#24,
22737 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
22738 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
22739 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
22740 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
22741 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
22742 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
22743 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
22744 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
22745 kf3=\EOR, kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>,
22746 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
22747 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
22748 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
22751 # From: Rick Thomas <ihnp4!btlunix!rbt>
22752 # (xtalk: I added <rmam>/<smam> based on the init string.
22753 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
22754 am, mir, msgr, xon,
22755 cols#80, it#8, lines#24, vt#3, xmc#1,
22756 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22757 bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
22758 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
22759 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
22760 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
22761 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
22762 il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB,
22763 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
22764 rmkx=\E[?1l\E>, rmso=\E[m\s,
22765 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
22766 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
22767 tbc=\E[3g, use=vt100+fnkeys,
22769 # The official PC terminal emulator program of the AT&T Product Centers.
22770 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
22771 simterm|attpc running simterm,
22774 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
22775 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
22776 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE,
22777 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
22779 #### Daisy wheel printers
22781 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
22782 # wheel terminals. These are now largely obsolete.
22785 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
22786 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
22789 cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
22790 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
22791 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
22793 is2=\r \E9, use=diablo1620,
22794 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
22795 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
22796 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
22798 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
22800 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
22802 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
22803 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
22805 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
22806 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
22807 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
22808 # If no tab is set or the terminal's in a bad mood, it glitches the screen
22809 # around all of memory. Note that return puts a blank ("a return character")
22810 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
22811 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
22812 # curses won't work (some old BSD versions) because it doesn't clear this bit,
22813 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
22814 # I have been unable to get tabs set in all 96 lines - it always leaves at
22815 # least one line with no tabs in it, and once you tab through that line,
22816 # it completely weirds out.
22817 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
22820 cols#80, lines#24, lm#96,
22821 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H,
22822 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
22823 dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R,
22824 il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0,
22825 smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
22829 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
22830 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
22831 gsi|mystery gsi terminal,
22834 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
22836 aj830|aj832|aj|anderson jacobson,
22838 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
22840 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
22841 aj510|Anderson-Jacobson model 510,
22844 clear=^L, cub1=^H, cuf1=\EX,
22845 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
22846 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
22847 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
22848 kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J,
22849 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
22851 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
22852 # This is incomplete, but it's a start.
22853 nec5520|nec|spinwriter|nec 5520,
22856 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
22857 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n,
22859 qume5|qume|Qume Sprint 5,
22862 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
22863 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
22864 # I suspect the xerox 1720 is the same as the diablo 1620.
22865 xerox1720|x1720|x1750|xerox 1720,
22868 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
22871 #### Miscellaneous obsolete terminals, manufacturers unknown
22873 # If you have any information about these (like, a manufacturer's name,
22874 # and a date on the serial-number plate) please send it!
22876 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
22879 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
22880 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
22883 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
22884 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
22885 kf4=\E8, rmso=\Em^C, smso=\Em^L,
22886 cops10|cops|cops-10|cops 10,
22889 bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
22890 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
22891 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
22893 # (d132: removed duplicate :ic=\E5:,
22894 # merged in capabilities from a BRL entry -- esr)
22895 d132|datagraphix|datagraphix 132a,
22898 bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
22899 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
22900 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H,
22901 kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew,
22902 # The d800 was an early portable terminal from c.1984-85 that looked a lot
22903 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
22904 # mode (which is what this entry looks like) and several other lesser-known
22907 OTbs, am, da, db, msgr, xhp,
22908 cols#80, it#8, lines#24,
22909 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
22910 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H,
22911 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
22912 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
22913 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
22914 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
22915 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22916 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
22917 digilog|digilog 333,
22920 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X,
22922 # The DWK was a terminal manufactured in the Soviet Union c.1986
22923 dwk|dwk-vt|dwk terminal,
22925 cols#80, it#8, lines#24,
22926 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv
22928 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22929 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
22930 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=\n, kbs=^?,
22931 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
22932 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
22933 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
22934 kpp=\Eg, nel=\r\n, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
22935 sgr0=\EX, smacs=\EF, smso=\ET,
22936 env230|envision230|envision 230 graphics terminal,
22938 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
22939 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
22941 sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
22942 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
22943 # coupler attached, the whole rig fitting in a suitcase and more or less
22944 # portable. Hot stuff for c.1977 :-) -- esr
22945 ep48|ep4080|execuport 4080,
22948 bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n,
22949 ep40|ep4000|execuport 4000,
22950 cols#136, use=ep4080,
22951 # Adam Thompson <athompso@pangea.ca> tells us:
22952 # Informer series - these are all portable units, resembling older
22953 # automatic bread-baking machines. The terminal looks like a `clamshell'
22954 # design, but isn't. The structure is similar to the Direct terminals,
22955 # but only half the width. The entire unit is only about 10" wide.
22956 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
22957 # keyboard. All the keys are crammed together, much like some laptop
22958 # PCs today, but perhaps less well organized...all these units have a
22959 # bewildering array of plugs on the back, including a built-in modem.
22960 # The 305 was a color version of the 304; the 306 and 307 were mono and
22961 # color terminals built for IBM bisync protocols.
22962 # From: Paul Leondis <unllab@amber.berkeley.edu>
22963 ifmr|Informer D304,
22966 clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC,
22967 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
22968 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
22970 # Entry largely based on wy60 and has the features of wy60ak.
22971 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
22972 am, bw, hs, km, mir, msgr, ul, xon,
22973 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
22974 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
22975 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r,
22976 cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
22977 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
22978 ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>,
22979 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n,
22981 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
22982 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
22984 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
22985 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
22986 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
22987 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
22988 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
22989 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
22990 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
22991 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
22992 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
22993 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
22994 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
22995 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
22996 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
22997 rs3=\EwG\Ee($<150>,
22998 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
22999 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
23000 %t%{64}%|%;%?%p7%t%{1}%|%;%c,
23001 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
23002 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
23004 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
23005 uc=\EG8\EG0, use=adm+sgr,
23006 teletec|Teletec Datascreen,
23009 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K,
23011 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
23012 # This description is for the LANPAR Technologies VISION 3220
23013 # terminal from 1984/85. The function key definitions k0-k5 represent the
23014 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
23015 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
23017 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
23018 # I had a couple of scopes (3221) like this once where I used to work, around
23019 # the 1987 time frame if memory serves me correctly. These scopes were made
23020 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
23021 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
23022 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
23023 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
23024 # (3221) cost about $1500 each, and one was always broken -- had to be sent
23025 # back to the shop for repairs.
23026 # The only real advantage these scopes had over the VT-240's were:
23027 # 1) They were faster in the Regis display, or at least the ones I did
23028 # 2) They had a handy debugging feature where you could split-screen the
23029 # scope, the graphics would appear on the top, and the REGIS commands would
23030 # appear on the bottom. I don't remember the VT-240s being able to do that.
23031 # I would swear that LANPAR Technologies was in MA someplace, but since I
23032 # don't work at the same place anymore, and those terminals and manuals were
23033 # long since junked, I cannot be any more sure than that.
23035 # (v3220: removed obsolete ":kn#10:",
23036 # I added <rmam>/<smam> based on the init string -- esr)
23037 v3220|LANPAR Vision II model 3220/3221/3222,
23038 OTbs, am, mir, xenl,
23039 cols#80, it#8, lines#24,
23040 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
23041 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
23042 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
23043 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
23044 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
23045 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
23046 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
23047 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
23048 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
23049 ######## ICH/ICH1 VERSUS RMIR/SMIR
23051 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
23052 # are present; the symptom is doubled characters in an update using insert.
23053 # These applications are technically correct; in both 4.3BSD termcap and
23054 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
23055 # unless the terminal needs both. To my knowledge, no terminal still in this
23056 # file requires both other than the very obsolete dm2500.
23058 # For ncurses-based applications this is not a problem, as ncurses uses
23059 # one or the other as appropriate but never mixes the two. Therefore we
23060 # have not corrected entries like `linux' and `xterm' that specify both.
23061 # If you see doubled characters from these, use the linux-nic and xterm-nic
23062 # entries that suppress ich/ich1. And upgrade to ncurses!
23065 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
23067 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
23068 # ECMA-48 standards are said to be almost identical, but are not the same
23069 # as X3.64 (though for practical purposes they are close supersets of it).
23071 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
23072 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
23073 # Coded Character Sets"), include your snail-mail address, and you should
23074 # receive the document in due course. Don't expect an email acknowledgment.
23076 # Related standards include "X3.4-1977: American National Standard Code for
23077 # Information Interchange" (the ASCII standard) and "X3.41.1974:
23078 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
23079 # American National Standard for Information Interchange." I believe (but
23080 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
23084 #### VT100/ANSI/ECMA-48
23086 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
23087 # and ECMA-48 Control Functions for Coded Character Sets.
23089 # Much of the content of this comment is adapted from a table prepared by
23090 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
23091 # discussion of some terminfo-related issues, and updates to capture ECMA-48
23092 # have been added. Control functions described in ECMA-48 only are tagged
23093 # with * after their names.
23095 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
23096 # sequences. In the main table, \E stands for an escape (\033) character,
23097 # SPC for space. Pn stands for a single numeric parameter to be inserted
23098 # in decimal ASCII. Ps stands for a list of such parameters separated by
23099 # semicolons. Parameter meanings for most parameterized sequences are
23100 # described in the notes.
23102 # Sequence Sequence Parameter or
23103 # Mnemonic Name Sequence Value Mode terminfo
23104 # -----------------------------------------------------------------------------
23105 # APC Applicatn Program Command \E _ - Delim -
23106 # BEL Bell * ^G - - bel
23107 # BPH Break Permitted Here * \E B - * -
23108 # BS BackSpace * ^H - EF -
23109 # CAN Cancel * ^X - - - (A)
23110 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
23111 # CCH Cancel Previous Character \E T - - -
23112 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
23113 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
23114 # CMD Coding Method Delimiter * \E
23115 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
23116 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
23117 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
23118 # CSI Control Sequence Intro \E [ - Intro -
23119 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
23120 # CUB Cursor Backward \E [ Pn D 1 eF cub
23121 # CUD Cursor Down \E [ Pn B 1 eF cud
23122 # CUF Cursor Forward \E [ Pn C 1 eF cuf
23123 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
23124 # CUU Cursor Up \E [ Pn A 1 eF cuu
23125 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
23126 # DA Device Attributes \E [ Pn c 0 - -
23127 # DAQ Define Area Qualification \E [ Ps o 0 - -
23128 # DCH Delete Character \E [ Pn P 1 eF dch
23129 # DCS Device Control String \E P - Delim -
23130 # DL Delete Line \E [ Pn M 1 eF dl
23131 # DLE Data Link Escape * ^P - - -
23132 # DMI Disable Manual Input \E \ - Fs -
23133 # DSR Device Status Report \E [ Ps n 0 - - (I)
23134 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
23135 # EA Erase in Area \E [ Ps O 0 eF - (J)
23136 # ECH Erase Character \E [ Pn X 1 eF ech
23137 # ED Erase in Display \E [ Ps J 0 eF ed (J)
23138 # EF Erase in Field \E [ Ps N 0 eF -
23139 # EL Erase in Line \E [ Ps K 0 eF el (J)
23140 # EM End of Medium * ^Y - - -
23141 # EMI Enable Manual Input \E b Fs -
23142 # ENQ Enquire ^E - - -
23143 # EOT End Of Transmission ^D - * -
23144 # EPA End of Protected Area \E W - - - (K)
23145 # ESA End of Selected Area \E G - - -
23146 # ESC Escape ^[ - - -
23147 # ETB End Transmission Block ^W - - -
23148 # ETX End of Text ^C - - -
23149 # FF Form Feed ^L - - -
23150 # FNK Function Key * \E [ Pn SPC W - - -
23151 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
23152 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
23153 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
23154 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
23155 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
23156 # HPB Char Position Backward \E [ j 1 FE -
23157 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
23158 # HT Horizontal Tab * ^I - FE - (N)
23159 # HTJ Horz Tab w/Justification \E I - FE -
23160 # HTS Horizontal Tab Set \E H - FE hts
23161 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
23162 # ICH Insert Character \E [ Pn @ 1 eF ich
23163 # IDCS ID Device Control String \E [ SPC O - * -
23164 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
23165 # IL Insert Line \E [ Pn L 1 eF il
23166 # IND Index \E D - FE -
23167 # INT Interrupt \E a - Fs -
23168 # JFY Justify \E [ Ps SPC F 0 FE -
23169 # IS1 Info Separator #1 * ^_ - * -
23170 # IS2 Info Separator #1 * ^^ - * -
23171 # IS3 Info Separator #1 * ^] - * -
23172 # IS4 Info Separator #1 * ^\ - * -
23173 # LF Line Feed ^J - - -
23174 # LS1R Locking Shift Right 1 * \E ~ - - -
23175 # LS2 Locking Shift 2 * \E n - - -
23176 # LS2R Locking Shift Right 2 * \E } - - -
23177 # LS3 Locking Shift 3 * \E o - - -
23178 # LS3R Locking Shift Right 3 * \E | - - -
23179 # MC Media Copy \E [ Ps i 0 - - (S)
23180 # MW Message Waiting \E U - - -
23181 # NAK Negative Acknowledge * ^U - * -
23182 # NBH No Break Here * \E C - - -
23183 # NEL Next Line \E E - FE nel (D)
23184 # NP Next Page \E [ Pn U 1 eF -
23185 # NUL Null * ^@ - - -
23186 # OSC Operating System Command \E ] - Delim -
23187 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
23188 # PFS Page Format Selection * \E Pn SPC J 0 - -
23189 # PLD Partial Line Down \E K - FE - (T)
23190 # PLU Partial Line Up \E L - FE - (U)
23191 # PM Privacy Message \E ^ - Delim -
23192 # PP Preceding Page \E [ Pn V 1 eF -
23193 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
23194 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
23195 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
23196 # PTX Parallel Texts * \E [ \ - - -
23197 # PU1 Private Use 1 \E Q - - -
23198 # PU2 Private Use 2 \E R - - -
23199 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
23200 # REP Repeat Char or Control \E [ Pn b 1 - rep
23201 # RI Reverse Index \E M - FE - (V)
23202 # RIS Reset to Initial State \E c - Fs -
23203 # RM Reset Mode * \E [ Ps l - - - (W)
23204 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
23205 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
23206 # SCI Single-Char Introducer \E Z - - -
23207 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
23208 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
23209 # SD Scroll Down \E [ Pn T 1 eF rin
23210 # SDS Start Directed String * \E [ Pn ] 1 - -
23211 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
23212 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
23213 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
23214 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
23215 # SI Shift In ^O - - - (P)
23216 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
23217 # SL Scroll Left \E [ Pn SPC @ 1 eF -
23218 # SLH Set Line Home * \E [ Pn SPC U - - -
23219 # SLL Set Line Limit * \E [ Pn SPC V - - -
23220 # SLS Set Line Spacing * \E [ Pn SPC h - - -
23221 # SM Select Mode \E [ Ps h none - - (W)
23222 # SO Shift Out ^N - - - (Q)
23223 # SOH Start Of Heading * ^A - - -
23224 # SOS Start of String * \E X - - -
23225 # SPA Start of Protected Area \E V - - - (Z)
23226 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
23227 # SPH Set Page Home * \E [ Ps SPC G - - -
23228 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
23229 # SPL Set Page Limit * \E [ Ps SPC j - - -
23230 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
23231 # SR Scroll Right \E [ Pn SPC A 1 eF -
23232 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
23233 # SRS Start Reversed String * \E [ Ps [ 0 - -
23234 # SSA Start of Selected Area \E F - - -
23235 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
23236 # SSW Set Space Width * \E [ Pn SPC [ none - -
23237 # SS2 Single Shift 2 (G2 set) \E N - Intro -
23238 # SS3 Single Shift 3 (G3 set) \E O - Intro -
23239 # ST String Terminator \E \ - Delim -
23240 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
23241 # STS Set Transmit State \E S - - -
23242 # STX Start pf Text * ^B - - -
23243 # SU Scroll Up \E [ Pn S 1 eF indn
23244 # SUB Substitute * ^Z - - -
23245 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
23246 # SYN Synchronous Idle * ^F - - -
23247 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
23248 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
23249 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
23250 # TBC Tab Clear \E [ Ps g 0 FE tbc
23251 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
23252 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
23253 # TSS Thin Space Specification \E [ Pn SC E none FE -
23254 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
23255 # VPB Line Position Backward * \E [ Pn k 1 FE -
23256 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
23257 # VT Vertical Tabulation * ^K - FE -
23258 # VTS Vertical Tabulation Set \E J - FE -
23260 # ---------------------------------------------------------------------------
23264 # Some control characters are listed in the ECMA-48 standard without
23265 # being assigned functions relevant to terminal control there (they
23266 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
23267 # here anyway for completeness.
23269 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
23271 # (B) There seems to be some confusion abroad between CHA and HPA. Most
23272 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
23273 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
23274 # preserved the CHA abbreviation.
23276 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
23277 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
23278 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
23279 # CHT abbreviation.
23281 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
23283 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
23286 # (F) CTC parameter values:
23287 # 0 = set char tab,
23288 # 1 = set line tab,
23289 # 2 = clear char tab,
23290 # 3 = clear line tab,
23291 # 4 = clear all char tabs on current line,
23292 # 5 = clear all char tabs,
23293 # 6 = clear all line tabs.
23295 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
23296 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
23297 # Position Absolute" but retains the HVP abbreviation.
23299 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
23302 # (I) DSR parameter values:
23305 # 2 = busy, will send DSR later,
23307 # 4 = malfunction, will send DSR later,
23309 # 6 = request CPR response.
23311 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
23312 # 0 = clear to end,
23313 # 1 = clear from beginning,
23316 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
23318 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
23320 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
23321 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
23322 # Position Relative" but retains the HPR abbreviation.
23324 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
23327 # (O) SGR parameter values:
23328 # 0 = default mode (attributes off),
23335 # 7 = reverse video,
23337 # 9 = crossed-out (marked for deletion),
23338 # 10 = primary font,
23339 # 10 + n (n in 1..9) = nth alternative font,
23341 # 21 = double underline,
23346 # 26 = proportional spacing,
23358 # 38 = set fg color as in CCITT T.416,
23359 # 39 = set default fg color,
23368 # 48 = set bg color as in CCITT T.416,
23369 # 49 = set default bg color,
23370 # 50 = turn off 26,
23374 # 54 = turn off 51 & 52,
23375 # 55 = not overlined,
23376 # 56-59 = reserved,
23377 # 61-65 = variable highlights for ideograms.
23379 # (P) SI is also called LSO, Locking Shift Zero.
23381 # (Q) SI is also called LS1, Locking Shift One.
23383 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
23384 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
23385 # Absolute' but retains the VPA abbreviation.
23387 # (S) MC parameters:
23388 # 0 = start xfer to primary aux device,
23389 # 1 = start xfer from primary aux device,
23390 # 2 = start xfer to secondary aux device,
23391 # 3 = start xfer from secondary aux device,
23392 # 4 = stop relay to primary aux device,
23393 # 5 = start relay to primary aux device,
23394 # 6 = stop relay to secondary aux device,
23395 # 7 = start relay to secondary aux device.
23397 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
23400 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
23403 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
23405 # (W) RM/SM modes are as follows:
23406 # 1 = Guarded Area Transfer Mode (GATM),
23407 # 2 = Keyboard Action Mode (KAM),
23408 # 3 = Control Representation Mode (CRM),
23409 # 4 = Insertion Replacement Mode (IRM),
23410 # 5 = Status Report Transfer Mode (SRTM),
23411 # 6 = Erasure Mode (ERM),
23412 # 7 = Line Editing Mode (LEM),
23413 # 8 = Bi-Directional Support Mode (BDSM),
23414 # 9 = Device Component Select Mode (DCSM),
23415 # 10 = Character Editing Mode (HEM),
23416 # 11 = Positioning Unit Mode (PUM),
23417 # 12 = Send/Receive Mode (SRM),
23418 # 13 = Format Effector Action Mode (FEAM),
23419 # 14 = Format Effector Transfer Mode (FETM),
23420 # 15 = Multiple Area Transfer Mode (MATM),
23421 # 16 = Transfer Termination Mode (TTM),
23422 # 17 = Selected Area Transfer Mode (SATM),
23423 # 18 = Tabulation Stop Mode (TSM),
23424 # 19 = Editing Boundary Mode (EBM),
23425 # 20 = Line Feed New Line Mode (LF/NL),
23426 # 21 = Graphic Rendition Combination Mode (GRCM),
23427 # 22 = Zero Default Mode (ZDM).
23429 # The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
23430 # but are listed here for reference.
23432 # (X) Select Alternate Presentation Variants is used only for non-Latin
23435 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
23437 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
23440 # ---------------------------------------------------------------------------
23444 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
23445 # X3.64 Control Sequence Introducer is the two characters "Escape ["
23447 # Delim a Delimiter
23449 # x/y identifies a character by position in the ASCII table (column/row)
23451 # eF editor function (see explanation)
23453 # FE format effector (see explanation)
23455 # F is a Final character in
23456 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
23457 # a control sequence (F from 4/0 to 7/14)
23459 # Gs is a graphic character appearing in strings (Gs ranges from
23460 # 2/0 to 7/14) in the ASCII table
23462 # Ce is a control represented as a single bit combination in the C1 set
23463 # of controls in an 8-bit character set
23465 # C0 the familiar set of 7-bit ASCII control characters
23467 # C1 roughly, the set of control chars available only in 8-bit systems.
23468 # This is too complicated to explain fully here, so read Jim Fleming's
23469 # article in the February 1983 BYTE, especially pages 214 through 224.
23471 # Fe is a Final character of a 2-character Escape sequence that has an
23472 # equivalent representation in an 8-bit environment as a Ce-type
23473 # (Fe ranges from 4/0 to 5/15)
23475 # Fs is a Final character of a 2-character Escape sequence that is
23476 # standardized internationally with identical representation in 7-bit
23477 # and 8-bit environments and is independent of the currently
23478 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
23480 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
23483 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
23486 # Pn is a numeric parameter in a control sequence, a string of zero or
23487 # more characters ranging from 3/0 to 3/9 in the ASCII table
23489 # Ps is a variable number of selective parameters in a control sequence
23490 # with each selective parameter separated from the other by the code
23491 # 3/11 (which usually represents a semicolon); Ps ranges from
23492 # 3/0 to 3/9 and includes 3/11
23494 # * Not relevant to terminal control, listed for completeness only.
23496 # Format Effectors versus Editor Functions
23498 # A format effector specifies how following output is to be displayed.
23499 # An editor function allows you to modify the display. Informally
23500 # format effectors may be destructive; format effectors should not be.
23502 # For instance, a format effector that moves the "active position" (the
23503 # cursor or equivalent) one space to the left would be useful when you want to
23504 # create an overstrike, a compound character made of two standard characters
23505 # overlaid. Control-H, the Backspace character, is actually supposed to be a
23506 # format effector, so you can do this. But many systems use it in a
23507 # nonstandard fashion, as an editor function, deleting the character to the
23508 # left of the cursor and moving the cursor left. When Control-H is assumed to
23509 # be an editor function, you cannot predict whether its use will create an
23510 # overstrike unless you also know whether the output device is in an "insert
23511 # mode" or an "overwrite mode". When Control-H is used as a format effector,
23512 # its effect can always be predicted. The familiar characters carriage
23513 # return, linefeed, formfeed, etc., are defined as format effectors.
23515 # NOTES ON THE DEC VT100 IMPLEMENTATION
23517 # Control sequences implemented in the VT100 are as follows:
23519 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
23520 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
23522 # plus several private DEC commands.
23524 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
23526 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
23527 # Erase from beginning of line to cursor Esc [ 1 K
23528 # Erase line containing cursor Esc [ 2 K
23529 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
23530 # Erase from beginning of screen to cursor Esc [ 1 J
23531 # Erase entire screen Esc [ 2 J
23533 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
23534 # Esc [ 2 J, but this is wrong; the default is 0.
23536 # The VT100 responds to receiving the DA (Device Attributes) control
23538 # Esc [ c (or Esc [ 0 c)
23540 # by transmitting the sequence
23544 # where Ps is a character that describes installed options.
23546 # The VT100's cursor location can be read with the DSR (Device Status
23551 # The VT100 reports by transmitting the CPR sequence
23555 # where Pl is the line number and Pc is the column number (in decimal).
23557 # The specification for the DEC VT100 is document EK-VT100-UG-003.
23561 # Here is a description of the color and attribute controls supported in the
23562 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
23563 # terminal emulators for Intel boxes obey these. They are a proper subset
23564 # of the ECMA-48 escapes.
23566 # 0 all attributes off
23567 # 1 foreground bright
23569 # 5 blink on/background bright (not reliable with brown)
23571 # 8 set blank (non-display)
23572 # 10 set primary font
23573 # 11 set first alternate font (on PCs, display ROM characters 1-31)
23574 # 12 set second alternate font (on PCs, display IBM high-half chars)
23576 # Color attribute sets
23577 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
23578 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
23579 # Bright black becomes gray. Bright brown becomes yellow,
23580 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
23582 # * If the 5 attribute is on and you set a background color (40-47) it is
23583 # supposed to enable bright background.
23585 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
23586 # when you try to set a "bright brown" (yellow) background with attribute
23587 # 5 (you get a blinking yellow foreground instead). A few displays
23588 # (including the System V console) support an attribute 6 that undoes this
23589 # braindamage (this is required by iBCS2).
23591 # * Some older versions of ANSI.SYS have a bug that causes thems to require
23592 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
23595 #### Intel Binary Compatibility Standard
23597 # For comparison, here are the capabilities implied by the Intel Binary
23598 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
23599 # These recommendations are optional. IBCS2 allows the leading escape to
23600 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
23601 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
23602 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
23603 # terminfo entry are followed with the corresponding capability in parens:
23605 # CSI <n>k disable (n=0) or enable (n=1) keyclick
23606 # CSI 2h lock keyboard
23607 # CSI 2i send screen as input
23608 # CSI 2l unlock keyboard
23609 # CSI 6m enable background color intensity
23610 # CSI <0-2>c reserved
23611 # CSI <0-59>m select graphic rendition
23612 # CSI <n>;<m>H (cup) cursor to line n and column m
23613 # CSI <n>;<m>f cursor to line n and column m
23614 # CSI <n>@ (ich) insert characters
23615 # CSI <n>A (cuu) cursor up n lines
23616 # CSI <n>B (cud) cursor down n lines
23617 # CSI <n>C (cuu) cursor right n characters
23618 # CSI <n>D (cud) cursor left n characters
23619 # CSI <n>E cursor down n lines and in first column
23620 # CSI <n>F cursor up n lines and in first column
23621 # CSI <n>G (hpa) position cursor at column n-1
23622 # CSI <n>J (ed) erase in display
23623 # CSI <n>K (el) erase in line
23624 # CSI <n>L (il) insert line(s)
23625 # CSI <n>P (dch) delete characters
23626 # CSI <n>S (indn) scroll up n lines
23627 # CSI <n>T (rin) scroll down n lines
23628 # CSI <n>X (ech) erase characters
23629 # CSI <n>Z (cbt) back up n tab stops
23630 # CSI <n>` cursor to column n on line
23631 # CSI <n>a (cuu) cursor right n characters
23632 # CSI <n>d (vpa) cursor to line n
23633 # CSI <n>e cursor down n lines and in first column
23634 # CSI <n>g (cbt) clear all tabs
23635 # CSI <n>z make virtual terminal n active
23636 # CSI ?7h (smam) turn automargin on
23637 # CSI ?7l (rmam) turn automargin off
23638 # CSI s save cursor position
23639 # CSI u restore cursor position to saved value
23640 # CSI =<c>A set overscan color
23641 # CSI =<c>F set normal foreground color
23642 # CSI =<c>G set normal background color
23643 # CSI =<c>H set reverse foreground color
23644 # CSI =<c>I set reverse foreground color
23645 # CSI =<c>J set graphic foreground color
23646 # CSI =<c>K set graphic foreground color
23647 # CSI =<n>g (dispc) display n from alternate graphics character set
23648 # CSI =<p>;<d>B set bell parameters
23649 # CSI =<s>;<e>C set cursor parameters
23650 # CSI =<x>D enable/disable intensity of background color
23651 # CSI =<x>E set/clear blink vs. bold background
23652 # CSI 7 (sc) (sc) save cursor position
23653 # CSI 8 (rc) (rc) restore cursor position to saved value
23654 # CSI H (hts) (hts) set tab stop
23655 # CSI Q<n><string> define function key string
23656 # (string must begin and end with delimiter char)
23657 # CSI c (clear) clear screen
23659 # The lack of any specification for attributes in SGR (among other things)
23660 # makes this a wretchedly weak standard. The table above is literally
23661 # everything iBSC2 has to say about terminal escape sequences; there is
23662 # no further discussion of their meaning or how to set the parameters
23663 # in these sequences at all.
23666 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
23668 # The historical termcap file entries were written primarily in 4.4BSD termcap.
23669 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
23670 # with the extension names chosen for compatibility with the termcap names
23671 # assigned in System V terminfo. There are some variant extension sets out
23672 # there. We try to describe them here.
23674 #### XENIX extensions:
23676 # The XENIX extensions include a set of function-key capabilities as follows:
23678 # code XENIX variable name terminfo name name clashes?
23679 # ---- ------------------- ------------- -----------------------
23681 # CR key_char_right
23682 # CW key_change_window create_window
23684 # HM key_home khome
23686 # LD key_delete_line kdl1
23687 # LF key_linefeed label_off
23688 # NU key_next_unlocked_cell
23689 # PD key_page_down knp
23691 # PN start_print mc5
23693 # PS stop_print mc4
23694 # PU key_page_up kpp pulse
23695 # RC key_recalc remove_clock
23696 # RF key_toggle_ref req_for_input
23697 # RT key_return kent
23698 # UP key_up_arrow kcuu1 parm_up_cursor
23700 # WR key_word_right
23702 # The XENIX extensions also include the following character-set and highlight
23705 # XENIX terminfo function
23706 # ----- -------- ------------------------------
23707 # GS smacs start alternate character set
23708 # GE rmacs end alternate character set
23709 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
23710 # bo blink begin blink (not used in /etc/termcap)
23711 # be end blink (not used in /etc/termcap)
23712 # bb blink glitch (not used in /etc/termcap)
23713 # it dim begin dim (not used in /etc/termcap)
23714 # ie end dim (not used in /etc/termcap)
23715 # ig dim glitch (not used in /etc/termcap)
23717 # Finally, XENIX also used the following forms-drawing capabilities:
23719 # single double type ASCII approximation
23720 # ------ ------ ------------- -------------------
23721 # GV Gv vertical line |
23722 # GH Gv horizontal line - _
23723 # G1 G5 top right corner _ |
23724 # G2 G6 top left corner |
23725 # G3 G7 bottom left corner |_
23726 # G4 G8 bottom right corner _|
23727 # GD Gd down-tick character T
23728 # GL Gl left-tick character -|
23729 # GR Gr right-tick character |-
23730 # GC Gc middle intersection -|-
23731 # GU Gu up-tick character _|_
23733 # These were invented to take advantage of the IBM PC ROM character set. One
23734 # can compose an acsc string from the single-width characters as follows
23735 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
23736 # When translating a termcap file, ncurses tic will do this automatically.
23737 # The double forms characters don't fit the SVr4 terminfo model.
23739 #### AT&T Extensions:
23741 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
23742 # nonstandard capabilities. Its signature is the KM capability, used to name
23743 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
23744 # set. Comments in the original, and a little cross-checking with other AT&T
23745 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
23746 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
23747 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
23748 # cursor invisible), and CV=:ve: (make cursor normal).
23752 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
23753 # have the System V capabilities up to SVr1 level. After that, it supports
23754 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
23755 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
23756 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
23757 # HP binary format incompatible with SVr4's.
23759 #### IBM Extensions
23761 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
23762 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
23763 # capabilities following prtr_non with the following special capabilities:
23764 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
23765 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
23766 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
23767 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
23768 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
23769 # renamed (to kcbt and kslt). The places in the box[12] capabilities
23770 # correspond to acsc chars, here is the mapping:
23772 # box1[0] = ACS_ULCORNER
23773 # box1[1] = ACS_HLINE
23774 # box1[2] = ACS_URCORNER
23775 # box1[3] = ACS_VLINE
23776 # box1[4] = ACS_LRCORNER
23777 # box1[5] = ACS_LLCORNER
23778 # box1[6] = ACS_TTEE
23779 # box1[7] = ACS_RTEE
23780 # box1[8] = ACS_BTEE
23781 # box1[9] = ACS_LTEE
23782 # box1[10] = ACS_PLUS
23784 # The box2 characters are the double-line versions of these forms graphics.
23785 # The AIX binary terminfo format is incompatible with SVr4's.
23787 #### Iris console extensions:
23789 # HS is half-intensity start; HE is half-intensity end
23790 # CT is color terminal type (for Curses & rogue)
23791 # CP is color change escape sequence
23792 # CZ are color names (for Curses & rogue)
23794 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
23796 #### TC Extensions:
23798 # There is a set of extended termcaps associated with something
23799 # called the "Terminal Control" or TC package created by MainStream Systems,
23800 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
23801 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
23802 # that flags color terminals.
23804 ######## NCURSES USER-DEFINABLE CAPABILITIES
23806 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
23807 # infocmp to manipulate user-definable capabilities. Those that are intended
23808 # for use in either terminfo or termcap use 2-character names. Extended
23809 # function keys do not use 2-character names, and are available only with
23812 # Beginning in 2010, NetBSD curses has also provided a "-x" option for
23813 # tic/infocmp, and uses this database (with a few changes). There are a few
23814 # differences, noted in
23815 # https://invisible-island.net/ncurses/ncurses-netbsd.html
23817 # ncurses makes explicit checks for a few user-definable capabilities: AX,
23818 # RGB, U8, XM, which are documented in the user_caps(5) manual page.
23820 #### SCREEN Extensions:
23822 # The screen program uses the termcap interface. It recognizes a few useful
23823 # nonstandard capabilities. Those are used in this file.
23825 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
23827 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
23828 # E0 (str) Switch charset 'G0' back to standard charset.
23829 # S0 (str) Switch charset 'G0' to the specified charset.
23830 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
23833 # AX is relatively straightforward; it is interpreted by ncurses to say that
23834 # SGR 39/49 reset the terminal's foreground and background colors to their
23837 # XT is harder, since screen's manpage does not give more details. For that,
23838 # we must read screen's source-code. For example, when XT is set, screen
23841 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
23842 # screen may also set the terminal's name, which is (for xterm) distinct
23843 # from the icon name.
23844 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
23845 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
23846 # this is an rxvt feature.
23847 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
23848 # These are from xterm, although xterm accepts mouse codes that may not be
23849 # recognized by screen, e.g., 1005, 1006.
23850 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
23851 # sequence. However, because screen uses only termcap, the values returned
23852 # by Af/Ab are not usable because they rely on expressions that termcap
23853 # does not support. Therefore, screen uses a hardcoded string to work
23854 # around the limitation. In a few cases, screen also uses tparm, which
23855 # is a terminfo function rather than termcap.
23856 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
23857 # g) screen also uses the feature to decide whether to pay attention to other
23858 # xterm-related features which are unrelated to the description in the
23861 # Since XT is useful only when the outer terminal matches screen's assumptions,
23862 # it is appropriate to use it in the derived terminal descriptions such as
23863 # "screen.xterm", but not in the generic "screen", "screen-bce" entries.
23865 # The other ISO-2022 features are rarely used, but provided here to make
23866 # screen's termcap features available.
23868 #### XTERM Extensions:
23870 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
23871 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
23872 # additional function-key strings. Some other developers copied the feature,
23873 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
23874 # these key definitions less ambiguous.
23876 # A few terminals provide similar functionality (sending distinct keys when
23877 # a modifier is used), including rxvt.
23879 # These are the extended keys defined in this file:
23881 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
23882 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
23883 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
23884 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
23886 # Here are the other xterm-related extensions which are used in this file:
23888 # Cr is a string capability which resets the cursor color
23889 # Cs is a string capability which sets the cursor color to a given value.
23890 # The single string parameter is the color name/number, according to the
23892 # Ms modifies the selection/clipboard. Its parameters are
23893 # p1 = the storage unit (clipboard, selection or cut buffer)
23894 # p2 = the base64-encoded clipboard content.
23895 # Se resets the cursor style to the terminal power-on default.
23896 # Ss is a string capability with one numeric parameter. It is used to set the
23897 # cursor style as described by the DECSCUSR function to a block or
23899 # TS is a string capability which acts like "tsl", but uses no parameter and
23900 # goes to the first column of the "status line".
23901 # XM is a string capability which overrides ncurses's built-in string which
23902 # enables/disables xterm mouse mode.
23903 # xm shows the format of the mouse responses. Parameters are (from zero):
23907 # p4 = state, e.g., pressed or released
23908 # p6 = y-ordinate starting region
23909 # p7 = x-ordinate starting region
23910 # p8 = y-ordinate ending region
23911 # p9 = x-ordinate ending region
23912 # Other extensions, used in xm:
23915 #### Miscellaneous extensions:
23917 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
23918 # This was implemented for the Hurd.
23919 # rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
23920 # experimental feature of tmux.
23921 # E3 clears the terminal's scrollback buffer. This was implemented in the
23922 # Linux 3.0 kernel as a security feature. It matches a feature which was
23923 # added in xterm patch #107.
23924 # U8 is a numeric capability which denotes a terminal emulator which does not
23925 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
23926 # value to enable it.
23928 ######## CHANGE HISTORY
23930 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
23931 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
23932 # maintained by Eric S. Raymond as part of the ncurses project.
23934 # This file contains all the capability information present in John Kunze's
23935 # last version of the termcap master file, except as noted in the change
23936 # comments at end of file. Some information about very ancient obsolete
23937 # capabilities has been moved to comments. Some all-numeric names of older
23938 # terminals have been retired.
23940 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
23941 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
23942 # used by BSD curses.
23944 # The 9.1.0 version of this file was translated from my lightly-edited copy of
23945 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
23946 # the purpose. Unless the ncurses tic implementation and the Lisp code were
23947 # making perfectly synchronized mistakes which I then failed to catch by
23948 # eyeball, the translation was correct and perfectly information-preserving.
23950 # Major version number bumps correspond to major version changes in ncurses.
23952 # Here is a log of the changes since then:
23954 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
23955 # * First terminfo master translated from 8.3.
23956 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
23957 # * Replaced Wyse entries with updated entries supplied by vendor.
23959 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
23960 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
23961 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
23962 # * Better XENIX keycap translation. Describe TC termcaps.
23963 # * Contact and history info supplied by Qume.
23964 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
23965 # * Raided the Shuford FTP site for recent termcaps/terminfos.
23966 # * Added information on X3.64 and VT100 standard escape sequences.
23967 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
23968 # * Added a correct X11R6 xterm entry.
23969 # * Fixed terminfo translations of padding.
23970 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
23971 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
23972 # * Added u6/u7/u8/u9 capabilities.
23973 # * Added PCVT entry.
23974 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
23975 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
23976 # to use reverse-video standout so Emacs will look right.
23977 # * Added el1 capability to ansi.
23978 # * Added smacs/rmacs to ansi.sys.
23980 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
23981 # * New mt70 entry.
23982 # * Added COPYRIGHTS AND OTHER DELUSIONS.
23983 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
23984 # smartvid & smarterm, ampex 175 & 219 & 232,
23985 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
23986 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
23987 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
23988 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
23989 # * Replaced the Perkin-Elmer entries with vendor's official ones.
23990 # * Restored the old minimal-ansi entry, luna needs it.
23991 # * Fixed some incorrect ip and proportional-padding translations.
23992 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
23993 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
23994 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
23995 # to force a particular height.
23996 # * Added beehive4 and reorganized other Harris entries.
23997 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
23998 # * Merged in DEC's official entries for its terminals. The only old
23999 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
24000 # * Replaced the translated BBN BitGraph entries with purpose-built
24001 # ones from AT&T's SVr3.
24002 # * Replaced the AT&T entries with AT&T's official terminfos.
24003 # * Added teleray 16, vc415, cops10.
24004 # * Merged in many individual capabilities from SCO terminfo files.
24005 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
24007 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
24008 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
24009 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
24010 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
24011 # simterm, citoh and variants.
24012 # * Replaced sol entry with sol1 and sol2.
24013 # * Replaced Qume QVT and Freedom-series entries with purpose-built
24014 # terminfo entries.
24015 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
24016 # and dg200 entries using caps from from SCO.
24017 # * Added the usual set of function-key mappings to ANSI entry.
24018 # * Corrected xterm's function-key capabilities.
24019 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
24020 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
24021 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
24022 # * Fix in xterm entry, get the arrow keys right.
24023 # * Change some \0 escapes to \200.
24024 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
24025 # * Added apple (Videx card), adm1a, oadm31.
24026 # * Fixed malformed ampex csr.
24027 # * Fixed act4, cyb110; they had old-style prefix padding left in.
24028 # * Changed mandatory to advisory padding in many entries.
24029 # * Replaced HP entries up to hpsub with purpose-built ones.
24030 # * Blank rmir/smir/rmdc/smdc capabilities removed.
24031 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
24032 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
24033 # * Replaced the Ann Arbor entries with SCO's, the init strings are
24034 # more efficient (but the entries otherwise identical).
24035 # * Added dg211 from Shuford archive.
24036 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
24037 # adm42-nl, pc52, gs6300, xerox820, uts30.
24038 # * Pull SCO's padding into vi200 entry.
24039 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
24040 # entries merged in from SCO's descriptions.
24041 # * Fixed old-style prefix padding on zen50, h1500.
24042 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
24043 # entry from SCO's description.
24044 # * Reorganized the special entries.
24045 # * Added lm#0 to cbunix and virtual entries.
24047 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
24048 # * Restored cdc456tst.
24049 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
24050 # * Added megatek, beacon, microkit.
24051 # * Freeze for ncurses-1.9 release.
24052 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
24053 # * Added historical data for TAB.
24054 # * Comment fixes from David MacKenzie.
24055 # * Added the new BSDI pc3 entry.
24056 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
24057 # * A change in the tic -C logic now ensures that all entries in
24058 # the termcap translation will fit in < 1024 bytes.
24059 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
24060 # from GNU termcap file. This merges in all their local information.
24061 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
24062 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
24063 # * Added warnings about entries with long translations (restoring
24064 # all the GNU termcaps pushes a few over the edge).
24065 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
24066 # * Yet another tic change, and a couple of entry tweaks, to reduce the
24067 # number of long (> 1024) termcap translations back to 0.
24069 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
24070 # * Added kf13-kf20 to Linux entry.
24071 # * Regularize Prime terminal names.
24072 # * Historical data on Synertek.
24073 # * Freeze for ncurses-1.9.1.
24074 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
24075 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
24076 # * Eliminate whitespace in short name fields, this tanks some scripts.
24077 # * Name field changes to shorten some long entries.
24078 # * Termcap translation now automatically generates empty rmir/smir
24079 # when ich1/ich is present (copes with an ancient vi bug).
24080 # * Added `screen' entries from FSF's screen-3.6.2.
24081 # * Added linux-nic and xterm-nic entries.
24082 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
24083 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
24084 # eliminating some special-case code in ncurses.
24086 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
24087 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
24088 # that captures everything unique from it.
24089 # * Added reorder script generator.
24090 # * Freeze for ncurses 1.9.2 release.
24091 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
24092 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
24093 # * Added Olaf Siebert's corrections for adm12.
24094 # * ansi-pc-color now includes the colors and pairs caps, so that
24095 # entries which use it will inherit them automatically.
24096 # * The linux entry can now recognize the center (keypad 5) key.
24097 # * Removed some junk that found its way into Linux acsc.
24099 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
24100 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
24101 # * xterm doesn't try to use application keypad mode any more.
24102 # * Freeze for ncurses-1.9.3 release.
24103 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
24104 # * Added corrected sun entry from vendor.
24105 # * Added csr capability to linux entry.
24106 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
24107 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
24108 # * Some commented-out caps in long entries come back in, my code
24109 # for computing string-table lengths had a bug in it.
24110 # * pcansi series modified to fit comm-program reality better.
24111 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
24112 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
24113 # * Correct some bad aliases in the pcansi series
24114 # * Added entry for QNX console.
24115 # * Clean up duplicate long names for use with 4.4 library.
24116 # * Change vt100 standout to be normal reverse vide, not bright reverse;
24117 # this makes the Emacs status line look better.
24118 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
24119 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
24120 # * Minor surgery, mostly on name strings, to shorten termcap version.
24122 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
24123 # * Added dec-vt100 for use with the EWAN emulator.
24124 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
24125 # * Freeze for 1.9.5 alpha release.
24126 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
24127 # * Changed xterm lines to 24, the X11R6 default.
24128 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
24129 # * Added 7 newly discovered, undocumented acsc characters to linux
24130 # entry (the pryz{|} characters).
24131 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
24132 # * Correct two typos in the xterm entries introduced in 9.9.1.
24133 # * I finally figured out how to translate ko capabilities. Done.
24134 # * Added tvi921 entries from Tim Theisen.
24135 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
24136 # * Removed mystery tec entry, it was neither interesting nor useful.
24137 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
24138 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
24139 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
24140 # by making them relative to use capabilities
24141 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
24142 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
24143 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
24145 # * Translate all home=\E[;H capabilities to home=\E[H, they're
24147 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
24148 # vt100 and ANSI-like terminals.
24149 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
24150 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
24151 # does this now, too.
24152 # * fviewpoint is gone, it duplicated screwpoint.
24153 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
24154 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
24155 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
24156 # The UW vi50 replaces the old one, which becomes vi50adm,
24157 # * No more embedded commas in name fields.
24159 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
24160 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
24161 # * Introduced klone+* entries for describing Intel-console behavior.
24162 # * Linux kbs is default-mapped to delete for some brain-dead reason.
24163 # * -nsl -> -ns. The -pp syntax is obsolete.
24164 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
24165 # * Make xterm entry do application-keypad mode again. I got complaints
24166 # that it was messing up someone's 3270 emulator.
24167 # * Added some longname fields in order to avoid warning messages from
24168 # older tic implementations.
24169 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
24170 # it! (This gives us pi, greater than, less than, and a few more.)
24171 # * Freeze for ncurses-1.9.6 release.
24172 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
24173 # * Add xon to a number of console entries, they're memory-mapped and
24174 # don't need padding.
24175 # * Correct the use dependencies in the ansi series.
24176 # * Hand-translate more XENIX capabilities.
24177 # * Added hpterm entry for HP's X terminal emulator.
24178 # * Added aixterm entries.
24179 # * Shortened four names so everything fits in 14 chars.
24181 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
24182 # * Added ibcs2 entry and info on iBCS2 standard.
24183 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
24184 # * We can handle the HP meml/memu capability now.
24185 # * Added smacs to klone entries, just as documentation.
24186 # * Corrected ansi.sys and cit-500 entries.
24187 # * Added z39, vt320-k311, v220c, and avatar entries.
24188 # * Make pcansi use the ansi.sys invis capability.
24189 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
24190 # tvi925, tvi950, dt80, ncr7900i, h19.
24191 # * X3.64 has been withdrawn, change some references.
24192 # * Removed function keys from ansi-m entry.
24193 # * Corrected ansi.sys entry.
24194 # * Freeze for ncurses-1.9.7 release.
24195 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
24196 # * Added rmam/smam capabilities to many entries based on init strings.
24197 # * Added correct hpa/vpa to linux.
24198 # * Reduced several entries relative to vt52.
24199 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
24200 # * Exiled some utterly unidentifiable custom and homebrew types to the
24201 # UFO file; also, obsolete small-screen hardware; also, entries which
24202 # look flat-out incorrect, garbled, or redundant. These include the
24203 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
24204 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
24205 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
24206 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
24207 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
24208 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
24209 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
24210 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
24211 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
24212 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
24213 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
24214 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
24215 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
24216 # * Corrected pcvt25h as suggested by Brian C. Grayson
24217 # <bgrayson@pine.ece.utexas.edu>.
24218 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
24219 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
24220 # * Added kent=\EOM to xterm entry.
24222 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
24223 # * Corrected gigi entry.
24224 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
24225 # bad hpa/vpa capabilities.
24226 # * Corrected flash strings to have a uniform delay of .2 sec. No
24227 # more speed-dependent NUL-padding!
24228 # * terminfo capabilities in comments bracketed with <>.
24229 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
24230 # * Replaced pcvt with the 3.31 pcvt entries.
24231 # * Freeze for 1.9.7a.
24232 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
24233 # * Added emu entry from the X11R6 contrib tape sources.
24235 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
24236 # * Improved iris-ansi and sun entries.
24237 # * More flash string improvements.
24238 # * Corrected wy160 & wy160 as suggested by Robert Dunn
24239 # * Added dim to at386.
24240 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
24241 # he's ready to start using the termcap generated from this one.
24242 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
24243 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
24244 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
24245 # att610, att620, att630,
24246 # * Changed hazeltine name prefix from h to hz.
24247 # * Sent t500 to the UFI file.
24248 # * I think we've sucked all the juice out of BSDI's termcap file now.
24249 # * Freeze for ncurses 1.9.8 release
24250 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
24251 # * Unfreeze, linux kbs needed to be fixed.
24252 # * Tim Theisen pinned down a bug in the DMD firmware.
24253 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
24254 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
24255 # (The broken ones had been shadowed by sgr.)
24256 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
24257 # * Added documentation on ECMA-48 standard.
24258 # * New Amiga entry.
24259 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
24260 # * More ECMA-48 stuff
24261 # * Corrected typo in minix entry, added pc-minix.
24262 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
24263 # * Added rxvt entry.
24264 # * Added 1.3.x color-change capabilities to linux entry.
24265 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
24266 # * Corrected rxvt entry khome/kend.
24267 # * Corrected linux color change capabilities.
24268 # * NeXT entries from Dave Wetzel.
24269 # * Cleaned up if and rf file names (all in /usr/share now).
24270 # * Changed linux op capability to avoid screwing up a background color
24271 # pair set by setterm.
24272 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
24273 # * Added xterm-sun.
24274 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
24277 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
24278 # * Another sweep through the Shuford archive looking for new info.
24279 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
24280 # * Added st52 from Per Persson.
24281 # * Added eterm from the GNU Emacs 19.30 distribution.
24282 # * Freeze for 1.9.9.
24283 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
24284 # * FreeBSD console entries from Andrew Chernov.
24285 # * Removed duplicate Atari st52 name.
24286 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
24287 # * xterm doesn't actually have ACS_BLOCK.
24288 # * Change klone+color setf/setb to simpler forms that can be
24289 # translated into termcap.
24291 # * Removed mechanically-generated junk capabilities from cons* entries.
24292 # * Added color support to bsdos.
24293 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
24294 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
24295 # * Created ecma+color, linux can use it. Also added ech to linux.
24296 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
24297 # * Add descriptions to FreeBSD console entries. Also shorten
24298 # some aliases to <= 14 chars for portability.
24299 # * Added x68k console
24300 # * Added OTbs to several VT-series entries.
24301 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
24302 # * screen entry update for 3.7.1 from Michael Alan Dorman.
24303 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
24304 # * kterm correction due to Kenji Rikitake.
24305 # * ACS correction in vt320-kll due to Phillippe De Muyter.
24306 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
24307 # * Sun console entry correction from J.T. Conklin.
24308 # * Changed all DEC VT300 and up terminals to use VT300 tab set
24309 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
24310 # * Added smul to linux entry (we never noticed it was missing
24311 # because of sgr!).
24312 # * Added rmln to hp+labels (deduced from other HP entries).
24313 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
24314 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
24315 # * Corrected vt220 acsc.
24316 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
24317 # this corresponds to reality and helps prevent some tic warnings.
24318 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
24319 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
24320 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
24321 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
24322 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
24323 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
24324 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
24325 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
24326 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
24327 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
24328 # ifmr, v3220, wy100q, tandem653, ibmaed.
24329 # * Added DWK terminal description.
24330 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
24331 # * Many entries now have highlights inherited from adm+sgr.
24332 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
24333 # * xtitle and xtitle-twm enable access to the X status line.
24334 # * Added linux-1.3.6 color palette caps in conventional format.
24335 # * Added adm1178 terminal.
24336 # * Move fos and apollo terminals to obsolete category.
24337 # * Aha! The BRL terminals file told us what the Iris extensions mean.
24338 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
24339 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
24341 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
24342 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
24343 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
24344 # * Corrected, from BRL termcap file: vi50.
24345 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
24346 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
24347 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
24348 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
24349 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
24350 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
24351 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
24352 # * Paired-attribute fixes to various terminals.
24353 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
24354 # * xterm entry corrections from Thomas Dickey.
24355 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
24356 # * Added t916 entry, translated from a termcap in SCO's support area.
24357 # * New qnx entry from Michael Hunter.
24358 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
24359 # * Added hpex2 from Ville Sulko.
24360 # * Fixed a bug that ran the qnx and pcvtXX together.
24361 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
24362 # * Added dtterm entry from Solaris CDE.
24363 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
24364 # * corrected pairs#8 typo in dtterm entry.
24366 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
24367 # * updated xterm entry to cover 3.1.2E's new features.
24368 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
24369 # * Added new minix entry
24370 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
24371 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
24372 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
24373 # * Added Prism entries and kt7ix.
24374 # * Caution notes about EWAN and tabset files.
24375 # * Changed /usr/lib/tabset -> /usr/share/tabset.
24376 # * Added acsc/rmacs/smacs to vt52.
24377 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
24378 # * Merged in Thomas Dickey's reorganization of the xterm entries;
24379 # added technical corrections to avoid warning messages.
24380 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
24381 # * Added rmso=\E[27m in Linux entry.
24382 # * Added koi8-r support for Linux console.
24383 # * Replace xterm entries with canonical ones from XFree86 3.2.
24384 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
24385 # * Added color_xterm from Jacob Mandelson
24386 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
24387 # * Back off the xterm entry to use r6 as a base.
24388 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
24389 # * Added dec-vt220 at Adrian Garside's request.
24391 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
24393 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
24394 # * Minor corrections to xterm entries.
24395 # * Replaced EWAN telnet entry.
24396 # * Dropped the reorder script generator. It was a fossil.
24397 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
24398 # * Replaced minitel-2 entry.
24399 # * Added MGR, ansi-nt.
24400 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
24401 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
24402 # the 4.4BSD Lite2 file.
24404 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
24405 # * Use setaf/setab consistently with SVr4.
24406 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
24407 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
24408 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
24409 # * add xterm-16color, for XFree86 3.3
24410 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
24411 # * correct typo in emu
24412 # * correct typo in vt102-w (Robert Wuest)
24413 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
24414 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
24415 # * remove ech capability from rxvt (it does the wrong thing)
24416 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
24417 # * remove spurious newlines from several entries (hp+color, wy50,
24418 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
24420 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
24421 # * correct rmso capability of wy50-mc
24422 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
24423 # * add cbt to xterm-xf86-v32
24424 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
24425 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
24426 # other capabilities not in xterm-r6.
24427 # * remove alternate character set from kterm entry.
24428 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
24429 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
24430 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
24431 # * add xterm-8bit entry.
24432 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
24433 # * repair several places where early version of tic replaced \, with \\\,
24434 # * make acsc entries canonical form (sorted, uniq).
24435 # * modify acsc entries for linux, linux-koi8
24436 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
24437 # * add color, mouse support to kterm.
24438 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
24439 # * correct wy120 smxon/tbc capabilities which were stuck together.
24440 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
24441 # * add entry for xterm-xf86-v39t
24442 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
24443 # * add u8,u9 to sun-il description
24444 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
24445 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
24447 # * add hds200 description (Walter Skorski)
24448 # * add EMX 0.9b descriptions
24449 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
24450 # * rename xhpterm back to hpterm.
24451 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
24452 # * change initc in linux-c-nc to use 0..1000 range.
24453 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
24454 # * remove hpa/vpa from rxvt, which implements them incorrectly.
24455 # * add sgr0 for rxvt.
24456 # * remove bogus smacs/rmacs from EMX descriptions.
24457 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
24458 # * revised entry for att7300
24459 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
24460 # * use \0 rather than \200.
24461 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
24462 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
24463 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
24464 # * rename xterm-xf86-v39t to xterm-xf86-v40
24465 # * remove bold/underline from sun console entries since they're not
24467 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
24468 # * add beterm entry (Fred Fish)
24469 # * add irix-color/xwsh entry.
24470 # * turn ncv off for linux.
24471 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
24472 # * set ncv for FreeBSD console (treat colors with reverse specially).
24473 # * remove sgr string from qnx based on report by Xiaodan Tang
24474 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
24475 # * remove spurious commas from descriptions
24476 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
24477 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
24478 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
24479 # apparently based on cp-866).
24481 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
24483 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
24484 # * Replaced minitel-2 entry.
24485 # * Added MGR, ansi-nt.
24486 # * Minor corrections to xterm entries.
24487 # * Replaced EWAN telnet entry.
24488 # * Dropped the reorder script generator. It was a fossil.
24489 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
24490 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
24491 # the 4.4BSD Lite2 file.
24492 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
24493 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
24494 # * Updated iris-ansi; corrected vt102-w.
24495 # * Switch base xterm entry to 3.3 level.
24496 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
24498 # * Removed rmir/smir from tv92B.
24500 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
24501 # * add hds200 description (Walter Skorski)
24502 # * add beterm entry (Fred Fish)
24503 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
24504 # iris-color entries.
24505 # * add emx entries.
24506 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
24507 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
24509 # * remove sgr string from qnx based on report by Xiaodan Tang
24510 # * Added u8/u9, removed rmul/smul from sun-il.
24511 # * 4.2 tic displays \0 rather than \200.
24512 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
24513 # apparently based on cp-866).
24514 # * Merged in Pavel Roskin's acsc for linux-koi8
24515 # * Corrected some erroneous \\'s to \.
24516 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
24517 # * II -> ii in pcvtXX, screen, xterm.
24518 # * Removed \n chars following ANSI escapes in sgr & friends.
24519 # * Updated Wyse entries.
24520 # * h19 corrections from Tim Pierce.
24521 # * Noted that the dm2500 has both ich and smir.
24522 # * added pccons for the Alpha under OSF/1.
24523 # * Added Sony NEWS workstation entries and cit101e-rv.
24524 # * Reverted `amiga'; to Kent Polk's version, as I'm told
24525 # the Verkuil entry messes up with Amiga Telnet.
24526 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
24527 # * Corrected attributions in 10.2.0 release notes.
24528 # * Scanned the Shuford archive for new terminfos and information.
24529 # * Removed sgr from qnx entry (Thomas Dickey).
24530 # * Added entries for ICL and Kokusai Data Systems terminals.
24531 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
24532 # * Incorporated att700 from the Boundless Technology FTP site.
24533 # * Miscellaneous contact-address and Web-page updates.
24535 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
24538 # * add nxterm and xterm-color terminfo description (request by Cristian
24539 # Gafton <gafton@redhat.com>).
24540 # * modify rxvt terminfo description to clear alternate screen before
24541 # switching back to normal screen, for compatibility with applications
24542 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
24543 # * modify linux terminfo description to reset color palette (reported
24544 # by Telford Tendys <telford@eng.uts.edu.au>).
24547 # * merge changes from current XFree86 xterm terminfo descriptions.
24550 # * Added minitel1 entries from Alexander Montaron.
24551 # * Added qnxt2 from Federico Bianchi.
24552 # * Added arm100 terminfo entries from Dave Millen.
24555 # * Added ncsa telnet entries from Francesco Potorti
24558 # * modify ncsa telnet entry to reflect color, other capabilities based on
24559 # examination of the source code - T.Dickey.
24562 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
24565 # * Added Francesco Potorti's tuned Wyse 99 entries.
24566 # * dtterm enacs correction from Alexander V. Lukyanov.
24567 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
24568 # * correct a typo in icl6404 entry.
24569 # * add xtermm and xtermc
24572 # * format most %'char' sequences to %{number}
24573 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
24574 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
24577 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
24578 # * correct initialization string in xterm-r5, add misc other features
24579 # to correspond with xterm patch #84 - TD
24582 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
24583 # * add Mathew Vernon's mach console entries
24584 # * corrections for ncsa function-keys (report by Larry Virden)
24587 # * change linux to use ncv#2, since underline does not work with color - TD
24590 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
24591 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
24592 # application modes, change kent to use the correct keypad code - TD
24595 # * add entry for Tera Term - TD
24598 # * minor improvements for teraterm entry - TD
24599 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
24600 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
24603 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
24604 # xterm and ncsa entries by removing the unneeded ones. Note that
24605 # some entries will return kend & khome versus kslt and kfnd, for
24606 # PC-style keyboards versus strict vt220 compatibility - TD
24609 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
24611 # * add 'crt' entry - TD
24612 # * correct typos in 'linux-c' entry - TD
24615 # * update entries for BSD/OS console to use klone+sgr and klone+color
24616 # (Jeffrey C Honig)
24619 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
24622 # * add linux-lat, from RedHat patches to ncurses 4.2
24625 # * add complete set of default function-key definitions for scoansi - TD.
24628 # * add cnorm, cvvis for Linux 2.2 kernels
24631 # * add kmous to xterm-r5 -TD
24632 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
24633 # parent "use" clause -TD
24636 # * corrected cnorm, added el1 in 'screen' description -TD
24639 # * add ms-vt100 -TD
24642 # * corrections to beterm entry -TD
24645 # * add cygwin entry -TD
24648 # * minor corrections for beterm entry -TD
24651 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
24654 # * add amiga-8bit entry
24655 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
24656 # rcons-color, based on
24657 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
24658 # * add alias for iris-ansi-net
24661 # * corrected scoansi entry's acsc, some function keys, add color -TD
24664 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
24665 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
24666 # key mapping, leaving Potorti's entries more like he named them -TD
24667 # * remove enter/exit am-mode from cygwin -TD
24670 # * correct typos in several entries (missing '[' from CSI):
24671 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
24672 # strings for avt-ns -TD
24673 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
24676 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
24677 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
24678 # * add xterm-88color and xterm-256color -TD
24681 # * add "obsolete" termcap strings -TD
24682 # * add kvt and gnome entries -TD
24685 # * correct cup string for regent100 -TD
24688 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
24689 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
24690 # * change OTrs capabilities to rs2 -TD
24691 # * add obsolete and extended capabilities to 'screen' -TD
24694 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
24696 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
24697 # and adding kcbt -TD
24700 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
24701 # nonstandard resource settings -TD
24704 # * minor fixes for xterm-*, based on Debian #58530 -TD
24707 # * add several terminal types from esr's "11.0", as well as comments.
24708 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
24709 # vt220-8bit, vt220-old, wy85-8bit
24712 # * add several terminal types from esr's "11.0.1" (ansi-*).
24713 # * update OTxx capabilities for changes on 2000/3/4.
24714 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
24717 # * move screen's AX extension to ecma+color, modify several entries to
24718 # use that, adjusting ncv as needed -TD
24721 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
24722 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
24723 # in esr's version.
24726 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
24727 # * correct color definition for ibm3164, make minor changes to other
24728 # IBM terminal definitions based on recent terminfo descriptions -TD
24731 # * add mgterm, from NetBSD -TD
24732 # * add alias sun-cgsix for sun-ss5 as per NetBSD
24733 # * change cons25w to use rs2 for reset rather than rs1 -TD
24734 # * add rc/sc to aixterm based on manpage -TD
24737 # * remove ncv from xterm-16color, xterm-256color
24740 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
24743 # * add Eterm (Michael Jennings)
24746 # * add amiga-vnc entry.
24749 # * correct description of Top Gun Telnet.
24750 # * add kterm-color
24753 # * add qansi* entries from QNX ftp site.
24756 # * add Matrix Orbital entries by Eric Z. Ayers).
24757 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
24761 # * add S0, E0 extensions to screen's entry -TD
24764 # * several corrections based on tic's new parameter-checking code -TD
24765 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
24766 # bracketing sequences that reset video attributes (\E8 would restore
24770 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
24773 # * improved scoansi, based on SCO man-page, and testing console,
24774 # scoterm with tack -TD
24777 # * modify kterm to use acsc via SCS controls.
24780 # * screen 3.9.8 allows xterm mouse controls to pass-through
24783 # * remove spurious "%|" from some xterm entries.
24786 # * modify 'screen' khome/kend to match screen 3.09.08
24787 # * add examples of 'screen' customization (screen.xterm-xfree86,
24788 # screen.xterm-r6, screen.teraterm) -TD
24791 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
24792 # * add "Apple_Terminal" entries -Benjamin Sittler
24793 # * remove time-delays from "Apple_Terminal" entries -TD
24794 # * make sgr entries time-delays consistent with individual caps -TD
24797 # * corrected/updated screen.xterm-xfree86
24800 # * ELKS descriptions, from Federico Bianchi
24801 # * add u6 (CSR) to Eterm (Michael Jennings).
24804 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
24805 # tic which handles names no longer than 14 characters. Add
24806 # corresponding descriptions for the Darwin PowerPC console named
24807 # "xnuppc" -Benjamin Sittler
24810 # * change kbs in mach entries to ^? (Marcus Brinkmann).
24813 # * add "putty" entry -TD
24814 # * updated "Apple_Terminal" entries -Benjamin Sittler
24817 # * add ms-vt100-color entry -TD
24818 # * add "konsole" entries -TD
24821 # * update gnome entry to Redhat 7.2 -TD
24824 # * add kf13-kf48 strings to cons25w -TD
24825 # * add pcvt25-color entry -TD
24826 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
24827 # * improve some features of scoansi entry based on SCO's version -TD
24828 # * add scoansi-new entry corresponding to OpenServer 5.0.6
24831 # * add kcbt to screen entry -TD
24834 # * add rxvt-16color, ibm+16color, mvterm entries -TD
24837 # * split out linux-basic entry, making linux-c inherit from that, and
24838 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
24839 # the history of this console type -TD
24840 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
24841 # r/g/b parameters of initc are in the range 0 to 1000 -TD
24844 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
24847 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
24848 # in the latter -TD
24851 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
24852 # * ncr260wy350pp has only 16 color pairs -TD
24853 # * add sun-type4 from NetBSD -TD
24854 # * update xterm-xfree86 to current (xterm patch #170) -TD
24855 # * add screen-bce, screen-s entries -TD
24856 # * add xterm-1002, xterm-1003 entries -TD
24859 # * update homepage for Top Gun Telnet/SSH
24862 # * reduce duplication in emx entries, added emx-base -TD
24865 # * corrected acs for screen.teraterm -TD
24866 # * add tkterm entry -TD
24869 # * cygwin changes from Charles Wilson:
24870 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
24871 # primary instead of nxterm, to match XFree86's xterm.terminfo
24872 # usage and to prevent circular links.
24873 # (rxvt): add additional codes from rxvt.org.
24874 # (rxvt-color): new alias
24875 # (rxvt-xpm): new alias
24876 # (rxvt-cygwin): like rxvt, but with special acsc codes.
24877 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
24878 # with a "native" MSWin GUI. Each takes different acsc codes,
24879 # which are both different from the "normal" rxvt's acsc.
24880 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
24881 # (cygwinDBG): ditto.
24884 # * update gnome terminal entries -TD
24887 # * add entries for djgpp 2.03 and 2.04 -TD
24890 # * add alias for vtnt -TD
24891 # * update xterm-xfree86 for XFree86 4.4 -TD
24894 # * add linux-vt (Andrey V Lukyanov)
24897 # * add screen.linux -TD
24900 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
24903 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
24904 # * add vt100+ and vt-utf8 entries -TD
24905 # * add uwin entry -TD
24908 # * add sgr strings to several common entries lacking them, e.g.,
24909 # screen, to make the entries more portable -TD
24910 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
24911 # * similar fixups for cvvis/cnorm various entries -TD
24914 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD
24918 # * add xterm-xf86-v44 -TD
24919 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
24920 # on G1 being used via an ISO-2022 escape sequence (report by
24921 # Juliusz Chroboczek) -TD
24922 # * add 'hurd' entry -TD
24925 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
24927 # * align with xterm #192's use of xterm-new -TD
24928 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
24929 # * make xterm-new the default "xterm" -TD
24932 # * minor fixes for emu -TD
24934 # * add rmam/smam to linux (Trevor Van Bremen)
24935 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
24936 # * fixes for avatar0 -TD
24937 # * fixes for vp3a+ -TD
24940 # * add xterm-pc-fkeys -TD
24941 # * review/update gnome and gnome-rh90 entries (prompted by
24942 # Redhat Bugzilla #122815) -TD
24943 # * review/update konsole entries -TD
24944 # * add sgr, correct sgr0 for kterm and mlterm -TD
24945 # * correct tsl string in kterm -TD
24948 # * make ncsa-m rmacs/smacs consistent with sgr -TD
24949 # * add sgr, rc/sc and ech to syscons entries -TD
24950 # * add function-keys to decansi -TD
24951 # * add sgr to mterm-ansi -TD
24952 # * add sgr, civis, cnorm to emu -TD
24953 # * correct/simplify cup in addrinfo -TD
24954 # * corrections for gnome and konsole entries
24955 # (Redhat Bugzilla #122815) -Hans de Goede
24956 # * modify DEC entries (vt220, etc), to add sgr string, and to use
24957 # ISO-2022 strings for rmacs/smacs -TD
24960 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
24963 # * improved putty entry -Robert de Bath
24966 # * remove dch/dch1 from rxvt because they are implemented inconsistently
24967 # with the common usage of bce/ech -TD
24968 # * remove khome from vt220 (vt220's have no home key) -TD
24969 # * add rxvt+pcfkeys -TD
24972 # * modify several entries to ensure xterm mouse and cursor visibility
24973 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
24974 # Eterm, screen. (The xterm entries are left alone - old ones for
24975 # compatibility, and the new ones do not require this change) -TD
24978 # * add morphos entry -Pavel Fedin
24979 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
24980 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
24983 # * update wsvt25 entry -TD
24986 # * update pairs for xterm-88color and xterm-256color to reflect the
24987 # ncurses extended-color support -TD
24990 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
24991 # * add aixterm-16color to demonstrate 16-color capability -TD
24994 # * add media-copy to vt100 -TD
24995 # * corrected acsc string for vt52 -TD
24998 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
25000 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
25003 # * re-corrected acsc string for vt52 -TD
25006 # * corrected sun-il sgr string which referred to bold and underline -TD
25007 # * add sun-color entry -TD
25010 # * modify sgr0 in several entries to reset alternate-charset as in the
25012 # * modify sgr string of prism9 to better match the individual
25016 # * correct order of use= in rxvt-basic -TD
25019 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
25022 # * other minor fixes to cygwin based on tack -TD
25023 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
25026 # * add nsterm-16color entry -TD
25027 # * remove ncv flag from xterm-16color -TD
25028 # * remove setf/setb from xterm-256color to match xterm #209 -TD
25029 # * update mlterm entry to 2.9.2 -TD
25032 # * fixes to make nsterm-16color match report
25033 # by Christian Ebert -Alain Bench
25036 # * add xterm+256color building block -TD
25037 # * add gnome-256color, putty-256color, rxvt-256color -TD
25040 # * add hpterm-color -TD
25043 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
25044 # * add gnome-fc5 (prompted by GenToo #122566) -TD
25045 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
25046 # * improve xterm-256color by combining the ibm+16color setaf/setab
25047 # strings with SGR 48. The setf/setb strings also are cancelled here
25048 # rather than omitted so derived entries will cancel those also -Alain
25052 # * add some notes regarding copyright to terminfo.src -TD
25053 # * use rxvt+pcfkeys in Eterm -TD
25054 # * remove km and flash from gnome, Eterm and rxvt since they do not work
25055 # as one would expect (km sends ESC rather than setting the 8th bit
25057 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
25058 # * add konsole-solaris -TD
25061 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
25062 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
25063 # * modify xterm-24 to inherit from "xterm" -TD
25064 # * add xiterm entry -TD
25065 # * add putty-vt100 entry -TD
25066 # * corrected spelling of Michael A Dorman's name, prompted by
25067 # http://www.advogato.org/person/mdorman/diary.html -TD
25070 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
25071 # * update xterm+pcfkeys to match xterm #216 -TD
25074 # * make descriptions of xterm entries consistent with its terminfo -TD
25077 # * add xfce, mgt -TD
25080 # * correct acsc string in kterm -TD
25083 # * add kon entry -TD
25084 # * remove invis from linux and related entries, add klone+sgr8 for those
25085 # that implement the feature (or have not been shown to lack it) -TD
25088 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
25089 # * minor improvements to rxvt+pcfkeys -TD
25092 # * fix a few typos in if/then/else expressions -TD
25095 # * add several GNU Screen variations with 16- and 256-colors, and
25096 # status line (Alain Bench).
25099 # * add Newbury Data entries (Jean-Charles Billaud).
25102 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
25105 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
25106 # * add konsole-256color entry -TD
25109 # * add 9term entry (request by Juhapekka Tolvanen) -TD
25112 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
25113 # * add shift-control- and control-modified keys for rxvt editing
25115 # * update mlterm entry to 2.9.3 -TD
25116 # * add mlterm+pcfkeys -TD
25119 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
25120 # xterm+pcc0, etc., to make the corresponding building blocks reflect
25121 # xterm's capabilities -TD
25122 # * add mrxvt entry -TD
25123 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
25126 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
25129 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
25130 # xterm starting with xterm patch #216 -TD
25131 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
25132 # to match xterm #230 -TD
25133 # * extend xterm+pccX entries to match xterm #230 -TD
25134 # * add xterm+app, xterm+noapp, from xterm #230 -TD
25135 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
25138 # * add screen.rxvt -TD
25141 # * add screen+fkeys (prompted by Debian #478094) -TD
25144 # * add screen.mlterm -TD
25145 # * improve mlterm and mlterm+pcfkeys -TD
25148 # * add Eterm-256color, Eterm-88color -TD
25149 # * add rxvt-88color -TD
25152 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
25153 # original to teraterm2.3 -TD
25154 # * update "gnome" to 2.22.3 -TD
25155 # * update "konsole" to 1.6.6 -TD
25156 # * add "aterm" -TD
25157 # * add "linux2.6.26" -TD
25160 # * change several \E[2g (clear tab at current column) to \E[3g
25161 # (clear all tabs) to match definition for tbc capability -TD
25164 # * add eterm-color -TD
25167 # * add screen.Eterm -TD
25170 # * correct typo in pfkey of ansi.sys-old
25171 # (report by Kalle Olavi Niemitalo)
25172 # * move function- and cursor-keys from emx-base to ansi.sys, and create
25173 # a pfkey capability which handles F1-F48 -TD
25176 # * add vwmterm entry (Bryan Christ)
25179 # * change ncv and op capabilities in sun-color to match Sun's entry for
25180 # this (report by Laszlo Peter)
25181 # * improve interix smso by using reverse rather than bold (report by
25182 # Kristof Zelechovski).
25185 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
25186 # * add linux-16color (Benjamin Sittler)
25187 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
25188 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
25189 # * add ccc and initc capabilities to xterm-16color -TD
25192 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
25195 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
25198 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
25199 # * rename minix to minix-1.7, add minix entry for Minix3 -TD
25202 # * add bterm (bogl 0.1.18) -TD
25203 # * minor fix to rxvt+pcfkeys -TD
25206 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
25209 # * add several screen-bce.XXX entries -TD
25212 # * modify screen-bce.XXX entries to exclude ech, since screen's color
25213 # model does not clear with color for that feature -TD
25216 # * rename atari and st52 to atari-old, st52-old, use newer entries from
25217 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
25220 # * add mlterm-256color entry -TD
25223 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
25224 # the alternate character set (patch by Nicholas Marriott)
25227 # * improve acsc for vt52 (Benjamin Sittler)
25228 # * modify nsterm entries for consistent sgr/sgr0 -TD
25229 # * modify xnuppc entries for consistent sgr/sgr0 -TD
25230 # * add invis to tek4115 sgr -TD
25233 # * reformat acsc strings to canonical format -TD
25236 # * add "XT" capability to entries for terminals that support both
25237 # xterm-style mouse- and title-controls, for "screen" which
25238 # special-cases TERM beginning with "xterm" or "rxvt" -TD
25241 # * fill in no-parameter forms of cursor-movement where a parameterized
25242 # form is available -TD
25243 # * fill in missing cursor controls where the form of the controls is
25245 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
25248 # * correct comparison used for setting 16-colors in linux-16color
25249 # entry (Novell #644831) -TD
25250 # * improve linux-16color entry, using "dim" for color-8 which makes it
25251 # gray rather than black like color-0 -TD
25254 # * make "vte" the principal entry defining "gnome", since GNOME terminal
25255 # is merely one of several terminals whose behavior is provided by this
25259 # * fix typo in rmso for tek4106 -Goran Weinholt
25262 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
25263 # * also suppress ncv in konsole-base -TD
25266 # * add U8 feature to denote entries for terminal emulators which do not
25267 # support VT100 SI/SO when processing UTF-8 encoding -TD
25268 # * add xterm-utf8 as a demo of the U8 feature -TD
25271 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
25274 # * update minix entry to minix 3.2 (Thomas Cort).
25277 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
25278 # * remove a backslash which continued comment, obscuring altos3
25279 # definition with OpenBSD toolset (Nicholas Marriott).
25282 # * add/use xterm+tmux chunk from xterm #271 -TD
25283 # * resync xterm-new entry from xterm #271 -TD
25284 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
25285 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
25286 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
25289 # * add kich1 to sun (Yuri Pankov)
25290 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
25293 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
25296 # * minor cleanup of X-terminal emulator section -TD
25297 # * add terminator entry -TD
25298 # * add simpleterm entry -TD
25301 # * add xterm+kbs fragment from xterm #272 -TD
25304 # * add pccon entries for OpenBSD console (Alexei Malinin)
25307 # * corrected old changelog comments -TD
25310 # * add putty-sco -TD
25313 # * add mach-gnu (Samuel Thibault)
25314 # * add mach-gnu-color, tweaks to mach-gnu -TD
25315 # * make sgr for sun-color agree with smso -TD
25316 # * make sgr for prism9 agree with other caps -TD
25317 # * make sgr for icl6404 agree with other caps -TD
25318 # * make sgr for ofcons agree with other caps -TD
25319 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
25320 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
25321 # * make sgr for avt-ns agree with other caps -TD
25324 # * make sgr for xterm-pcolor agree with other caps -TD
25325 # * make sgr for att5425 agree with other caps -TD
25326 # * make sgr for att630 agree with other caps -TD
25327 # * make sgr for linux entries agree with other caps -TD
25328 # * make sgr for tvi9065 agree with other caps -TD
25329 # * make sgr for ncr260vt200an agree with other caps -TD
25330 # * make sgr for ncr160vt100pp agree with other caps -TD
25331 # * make sgr for ncr260vt300an agree with other caps -TD
25332 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
25333 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
25336 # * correct order of use-clauses in st-256color -TD
25339 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
25342 # * document all of the user-defined capabilities in one place -TD
25343 # * add XT to some places to improve usefulness for other applications
25344 # than screen, which would like to pretend that xterm's title is
25345 # a status-line. -TD
25346 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
25347 # of ordering and overrides -TD
25350 # * add msgr to vt420, similar DEC vtXXX entries -TD
25351 # * add several missing vt420 capabilities from vt220 -TD
25352 # * factor out ansi+pp from several entries -TD
25353 # * change xterm+sl and xterm+sl-twm to include only the status-line
25354 # capabilities and not "use=xterm", making them more generally useful
25355 # as building-blocks -TD
25356 # * add dec+sl building block, as example -TD
25359 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
25360 # * add eslok flag to dec+sl -TD
25361 # * dec+sl applies to vt320 and up -TD
25362 # * drop wsl width from xterm+sl -TD
25363 # * reuse xterm+sl in putty and nsca-m -TD
25364 # * add ansi+tabs to vt520 -TD
25365 # * add ansi+enq to vt220-vt520 -TD
25368 # * remove p6 (bold) from opus3n1+ for consistency -TD
25369 # * remove acs stuff from env230 per clues in Ingres termcap -TD
25370 # * modify env230 sgr/sgr0 to match other capabilities -TD
25371 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
25372 # * make sgr for dku7202 agree with other caps -TD
25373 # * make sgr for ibmpc agree with other caps -TD
25374 # * make sgr for tek4107 agree with other caps -TD
25375 # * make sgr for ndr9500 agree with other caps -TD
25376 # * make sgr for sco-ansi agree with other caps -TD
25377 # * make sgr for d410 agree with other caps -TD
25378 # * make sgr for d210 agree with other caps -TD
25379 # * make sgr for d470c, d470c-7b agree with other caps -TD
25382 # * rewrite vt520 entry based on vt420 -TD
25383 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
25386 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
25387 # analysis by Martin Husemann).
25388 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
25389 # Onno van der Linden).
25390 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
25391 # * add kdch1, etc., to qvt108 -TD
25392 # * add dl1/il1 to some entries based on dl/il values -TD
25393 # * add dl to simpleterm -TD
25396 # * modify some older xterm entries to align with xterm source -TD
25397 # * separate "xterm-old" alias from "xterm-r6" -TD
25400 # * add E3 to xterm-basic and putty -TD
25403 # * add nsterm-256color, make this the default nsterm -TD
25404 # * remove bw from nsterm-bce, per testing with tack -TD
25407 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
25408 # (patch by Christian Persch).
25411 # * reviewed vte-2012, reverted most of the change since it was incorrect
25412 # based on testing with tack -TD
25413 # * un-cancel the initc in vte-256color, since this was implemented
25414 # starting with version 0.20 in 2009 -TD
25417 # * correct typo in sgr string for sun-color,
25418 # add bold for consistency with sgr,
25419 # change smso for consistency with sgr -TD
25420 # * correct typo in sgr string for terminator -TD
25421 # * add blink to the attributes masked by ncv in linux-16color (report
25422 # by Benjamin Sittler)
25425 # * change initialization for vt220, similar entries for consistency
25426 # with cursor-key strings (NetBSD #47674) -TD
25427 # * further improvements to linux-16color (Benjamin Sittler)
25430 # * move nsterm-related entries out of "obsolete" section to more
25431 # plausible "ansi consoles" -TD
25432 # * additional cleanup of table-of-contents by reordering -TD
25435 # * added note to clarify Terminal.app's non-emulation of the various
25436 # terminal types listed in the preferences dialog -TD
25439 # * use TS extension to describe xterm's title-escapes -TD
25440 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
25441 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
25442 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
25443 # (Debian #727119).
25444 # * simplify pfkey expression in ansi.sys -TD
25447 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
25450 # * updated notes for wsvt25 based on tack and vttest -TD
25451 # * add teken entry to show actual properties of FreeBSD's "xterm"
25455 # * add terminology entry -TD
25456 # * add mlterm3 entry, use that as "mlterm" -TD
25457 # * inherit mlterm-256color from mlterm -TD
25460 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
25463 # * cancel ccc in putty-256color and konsole-256color for consistency
25464 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
25465 # * add xterm+256setaf building block for various terminals which only
25466 # get the 256-color feature half-implemented -TD
25467 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
25471 # * add vt520ansi (Mike Gran)
25474 # * correct several entries which had termcap-style padding used in
25475 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
25476 # * correct syntax for padding in some entries: dg211, h19 -TD
25477 # * correct ti924-8 which had confused padding versus octal escapes -TD
25478 # * correct padding in sbi entry -TD
25481 # * update xterm-new to xterm patch #305 -TD
25482 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
25483 # (italic). This was a long-ago typo in screen 3.1.1 which was
25484 # overlooked until a few terminal emulators implemented the feature -TD
25487 # > fix regression in screen terminfo entries (reports by Christian
25488 # Ebert, Gabriele Balducci) -TD
25489 # + revert the change to screen; see notes for why this did not work -TD
25490 # + cancel sitm/ritm for entries which extend "screen", to work around
25491 # screen's hardcoded behavior for SGR 3 -TD
25494 # + modify sgr for screen.xterm-new to support dim capability -TD
25495 # + add dim capability to nsterm+7 -TD
25496 # + cancel dim capability for iterm -TD
25497 # + add dim, invis capabilities to vte-2012 -TD
25498 # + add sitm/ritm to konsole-base and mlterm3 -TD
25501 # + add xterm-1005 and xterm-1006 entries, with suggested extension
25502 # capability "xm" -TD
25505 # + update test-report for mrxvt -TD
25508 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
25511 # + reviewed terminology 0.6.1, add function key definitions. None of
25512 # the vt100-compatibility issues were improved -TD
25515 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
25516 # + add several key definitions to nsterm-bce to match preconfigured
25517 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
25520 # + remove unnecessary ';' from E3 capabilities -TD
25521 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
25522 # + split-out recent change to nsterm-bce as nsterm-build326, and add
25523 # nsterm-build342 to reflect changes with successive releases of OSX
25524 # (discussion with Leonardo B Schenkel)
25525 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
25529 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
25530 # + add several screen.XXX entries to support the respective variations
25531 # for 256 colors -TD
25534 # + add putty+fnkeys* building-block entries -TD
25537 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
25538 # + add vte-2014, update vte to use that -TD
25541 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
25542 # from xterm-new (report by Richard Birkett) -TD
25545 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
25546 # + fixes for st 0.5 from testing with tack -TD
25549 # + updated minitel entries to fix kel problem with emacs, and add
25550 # minitel1b-nb (Alexandre Montaron).
25551 # + reviewed/updated nsterm entry Terminal.app in OSX -TD
25552 # + replace some dead URLs in commands with equivalents from the
25553 # Internet Archive -TD
25556 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
25557 # + add keys f12-f124 to pccon+keys (Tati Chevron).
25560 # + fix some inconsistencies in the pccon* entries -TD
25563 # + add viewdata (Alexandre Montaron).
25566 # + tidy up comments about hardcoded 256color palette (report by
25567 # Leonardo Brondani Schenkel) -TD
25568 # + add putty-noapp entry, and amend putty entry to use application mode
25569 # for better consistency with xterm (report by Leonardo Brondani
25573 # + add 'oc' capability to xterm+256color, allowing palette reset for
25577 # + modify linux2.6 entry to improve line-drawing -TD
25578 # + make linux3.0 entry the default linux entry (Debian #823658) -TD
25581 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
25582 # reset palette using "oc" string as in linux -TD
25585 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
25586 # that could be returned -TD
25587 # + added a few capabilities fixed in recent vte -TD
25590 # + correct a typo in interix -TD
25593 # + updated minitel entries to use status line with screen(1), as well as
25594 # printing special G2 videotex chars like french accentuated glyph
25595 # using special cap XC= (patch by Alexandre Montaron).
25598 # + add linux-m1 minitel entries (patch by Alexandre Montaron).
25599 # + correct rs2 string for vt100-nam -TD
25602 # + modify linux-16color to not mask dim, standout or reverse with the
25603 # ncv capability -TD
25604 # + add 0.1sec mandatory delay to flash capabilities using the VT100
25605 # reverse-video control -TD
25606 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
25607 # entry, to avoid conflict with the user-defined mapping. The reset
25608 # feature will use ISO-8859-1 in any case (Mikulas Patocka).
25611 # + merge current st description (report by Harry Gindi) -TD
25614 # + modify flash capability for linux and wyse entries to put the delay
25615 # between the reverse/normal escapes rather than after -TD
25618 # + minor comment-fixes to help automate links to bug-urls -TD
25619 # + add dvtm, dvtm-256color -TD
25620 # + add settings corresponding to xterm-keys option to tmux entry to
25621 # reflect upcoming change to make that option "on" by default
25622 # (patch by Nicholas Marriott).
25623 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
25624 # + add dumb-emacs-ansi -TD
25627 # + correct a few spelling errors in comments -TD
25631 # + add vt100+4bsd building block, use that for older terminals rather
25632 # than "vt100" which is now mostly used as a building block for
25633 # terminal emulators -TD
25634 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions
25635 # (report/analysis by Robert King) -TD
25638 # + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
25639 # + add smso for env230, to match sgr -TD
25640 # + remove p7/protect from sgr in fbterm -TD
25641 # + drop setf/setb from fbterm; setaf/setab are enough -TD
25642 # + make xterm-pcolor sgr consistent with other capabilities -TD
25643 # + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
25644 # (discussion with Nicholas Marriott)
25647 # + correct missing comma-separator between string capabilities in
25648 # icl6402 and m2-nam -TD
25649 # + update formatting with ncurses 6.0.20170422 -TD
25650 # + restore rmir/smir in ansi+idc to better match original ansiterm+idc,
25651 # add alias ansiterm (report by Robert King).
25654 # + reformatted using hexadecimal numbers to improve readability -TD
25657 # + update interix entry using tack and SFU on Windows 7 Ultimate -TD
25658 # + use ^? for kdch1 in interix (reported by Jonathan de Boyne Pollard)
25659 # + add "rep" to xterm-new, available since 1997/01/26 -TD
25660 # + move SGR 24 and 27 from vte-2014 to vte-2012 (request by Alain
25664 # + update "iterm" entry -TD
25665 # + add "iterm2" entry (report by Leonardo Brondani Schenkel) -TD
25668 # + update notes on user-defined capabilities -TD
25671 # + fixes for "iterm2" (report by Leonardo Brondani Schenkel) -TD
25674 # + add "op" to xterm+256setaf -TD
25675 # + reviewed terminology 1.0.0 -TD
25676 # + reviewed st 0.7 -TD
25679 # + modify old terminology entry and a few other terminal emulators to
25680 # account for xon -TD
25681 # + correct sgr string for tmux, which used screen's "standout" code
25682 # rather than the standard code (patch by Roman Kagan)
25683 # + correct sgr/sgr0 strings in a few other cases reported by tic, making
25684 # those correspond to the non-sgr settings where they differ, but
25685 # otherwise use ECMA-48 consistently:
25686 # jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b,
25687 # dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an,
25688 # st-0.7, vi603, vwmterm -TD
25691 # + add xterm+noalt, xterm+titlestack, xterm+alt1049, xterm+alt+title
25692 # blocks from xterm #331 -TD
25693 # + add xterm+direct, xterm+indirect, xterm-direct entries from xterm
25695 # + modify xterm+256color and xterm+256setaf to use correct number of
25696 # color pairs, for ncurses 6.1 -TD
25697 # + add rs1 capability to xterm-256color -TD
25698 # + modify xterm-r5, xterm-r6 and xterm-xf86-v32 to use xterm+kbs to
25699 # match xterm #272, reflecting packager's changes -TD
25700 # + remove "boolean" Se, Ss from st-0.7 -TD
25703 # + add konsole-direct and st-direct -TD
25704 # + remove unsupported "Tc" capability from st-0.7; use st-direct if
25705 # direct-colors are wanted -TD
25708 # + add vte-direct -TD
25709 # + add XT, hpa, indn, and vpa to screen, and invis, E3 to tmux (patch by
25713 # + use xterm+sm+1006 in xterm-new, vte-2014 -TD
25714 # + use xterm+x11mouse in iterm, iterm2, mlterm3 because xterm's 1006
25715 # mode does not work with those programs. konsole is debatable -TD
25716 # + add "termite" entry (report by Markus Pfeiffer) -TD
25719 # + trim "XT" from screen entry -TD
25720 # + modify iterm to use xterm+sl-twm building block -TD
25721 # + mark konsole-420pc, konsole-vt100, konsole-xf3x obsolete reflecting
25722 # konsole's removal in 2008 -TD
25723 # + expanded the history section of konsole to explain its flawed
25724 # imitation of xterm's keyboard -TD
25725 # + use xterm+x11mouse in screen.* entries because screen does not yet
25726 # support xterm's 1006 mode -TD
25727 # + add nsterm-build400 for macOS 10.13 -TD
25728 # + add ansi+idc1, use that in ansi+idc adding dch for consistency -TD
25729 # + update vte to vte-2017 -TD
25730 # + add ecma+strikeout to vte-2017 -TD
25731 # + add iterm2-direct -TD
25732 # + updated teraterm, added teraterm-256color -TD
25733 # + add mlterm-direct -TD
25734 # + add descriptions for ANSI building-blocks -TD
25737 # + correct Ss/Ms interchange in st-0.7 entry (tmux #1264) -TD
25738 # + fix remaining flash capabilities with trailing mandatory delays -TD
25740 ######## SHANTIH! SHANTIH! SHANTIH!