1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2017/05/14 01:32:04 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=\r, cud1=\n, ind=\n,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
314 kcud1=\n, nel=\r\n, .kbs=^H,
318 bel=^G, cr=\r, cud1=\n, ind=\n,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=\n, bel=^G, cud1=\n,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E[4l,
362 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
364 ansi+sgr|ansi graphic renditions,
365 blink=\E[5m, invis=\E[8m, rev=\E[7m,
366 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
368 ansi+sgrso|ansi standout only,
369 rmso=\E[m, smso=\E[7m,
370 ansi+sgrul|ansi underline only,
371 rmul=\E[m, smul=\E[4m,
372 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
374 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
376 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
377 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
379 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
381 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
382 ansi+csr|ansi scroll-region plus cursor save & restore,
383 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
385 # The normal (ANSI) flavor of "media copy" building block asserts that
386 # characters sent to the printer do not echo on the screen. DEC terminals
387 # can also be put into autoprinter mode, where each line is sent to the
388 # printer as you move off that line, e.g., by a carriage return.
389 ansi+pp|ansi printer port,
391 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
392 dec+pp|DEC autoprinter mode,
393 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
395 # The IBM PC alternate character set. Plug this into any Intel console entry.
396 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
397 # ROM graphics for control characters such as the diamond, up- and down-arrow.
398 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
399 # will work with any Intel console, they all seem to have inherited \E[11m
400 # from the ANSI.SYS de-facto standard.
401 klone+acs|alternate character set for ansi.sys displays,
402 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
403 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
404 \301w\302x\263y\363z\362{\343|\330}\234~\376,
405 rmacs=\E[10m, smacs=\E[11m,
407 # Highlight controls corresponding to the ANSI.SYS standard. Most
408 # console drivers for Intel boxes obey these. Makes the same assumption
409 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
410 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
411 klone+sgr|attribute control for ansi.sys displays,
412 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
413 rmso=\E[m, rmul=\E[m,
414 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
416 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
419 # Most Intel boxes do not treat "invis" (invisible) text.
420 klone+sgr8|attribute control for ansi.sys displays,
422 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
423 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
426 # Highlight controls corresponding to the ANSI.SYS standard. *All*
427 # console drivers for Intel boxes obey these. Does not assume \E[11m will
428 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
429 # diamond and arrow characters under curses.
430 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
431 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
433 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
434 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
435 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
438 # KOI8-R (RFC1489) acs (alternate character set)
439 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
440 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
441 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
442 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
443 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
445 rmacs=\E[10m, smacs=\E[11m,
447 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
448 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
449 # but equivalent strings that don't rely on that coincidence:
450 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
451 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
452 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
453 # They match a subset of ECMA-48.
454 klone+color|color control for ansi.sys and ISO6429-compatible displays,
455 colors#8, ncv#3, pairs#64,
456 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
458 # This is better than klone+color, it doesn't assume white-on-black as the
459 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
460 ecma+color|color control for ECMA-48-compatible terminals,
462 colors#8, ncv#3, pairs#64,
463 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
465 # Attribute control for ECMA-48-compatible terminals
466 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
467 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
469 ecma+strikeout|ECMA-48 strikeout/crossed-out,
470 rmxx=\E[29m, smxx=\E[9m,
472 # For comparison, here are all the capabilities implied by the Intel
473 # Binary Compatibility Standard (level 2) that fit within terminfo.
474 # For more detail on this rather pathetic standard, see the comments
475 # near the end of this file.
476 ibcs2|Intel Binary Compatibility Standard prescriptions,
477 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
478 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
479 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
480 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
481 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
482 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
483 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
486 #### ANSI/ECMA-48 terminals and terminal emulators
488 # See near the end of this file for details on ANSI conformance.
489 # Don't mess with these entries! Lots of other entries depend on them!
491 # This section lists entries in a least-capable to most-capable order.
492 # if you're in doubt about what `ANSI' matches yours, try them in that
493 # order and back off from the first that breaks.
495 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
496 # and more than one page of memory. It uses local motions instead of
497 # direct cursor addressing, and makes almost no assumptions. It does
498 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
499 ansi-mr|mem rel cup ansi,
501 cols#80, lines#24, use=vanilla, use=ansi+erase,
504 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
505 # beware of screen size problems and memory relative cursor addressing.
506 ansi-mini|any ansi terminal with pessimistic assumptions,
508 cols#80, lines#24, use=vanilla, use=ansi+cup,
511 # ansi-mtabs adds relative addressing and minimal tab support
512 ansi-mtabs|any ansi terminal with pessimistic assumptions,
514 ht=^I, use=ansi-mini, use=ansi+local1,
516 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
518 # The following is an entry for the full ANSI 3.64 (1977). It lacks
519 # padding, but most terminals using the standard are "fast" enough
520 # not to require any -- even at 9600 bps. If you encounter problems,
521 # try including the padding specifications.
523 # Note: the :as: and :ae: specifications are not implemented here, for
524 # the available termcap documentation does not make clear WHICH alternate
525 # character set to specify. ANSI 3.64 seems to make allowances for several.
526 # Please make the appropriate adjustments to fit your needs -- that is
527 # if you will be using alternate character sets.
529 # There are very few terminals running the full ANSI 3.64 standard,
530 # so I could only test this entry on one verified terminal (Visual 102).
531 # I would appreciate the results on other terminals sent to me.
533 # Please report comments, changes, and problems to:
535 # U.S. MAIL: Hugh Hansard
538 # Atlanta, GA. 30322.
540 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
542 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
543 ansi77|ansi 3.64 standard 1977 version,
545 cols#80, it#8, lines#24,
546 bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
547 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
548 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
549 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
550 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
551 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
552 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
553 smso=\E[7m, smul=\E[4m,
555 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
556 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
557 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
558 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
559 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
560 # to confuse many emulators. On the other hand, we can count on these programs
561 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
562 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
563 # ANSI.SYS influence.
564 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
565 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
567 cols#80, it#8, lines#24,
568 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
569 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
570 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
571 hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
572 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
574 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
575 lines#25, use=pcansi-m,
576 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
577 lines#33, use=pcansi-m,
578 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
579 lines#43, use=pcansi-m,
580 # The color versions. All PC emulators do color...
581 pcansi|ibm-pc terminal programs claiming to be ansi,
582 use=klone+color, use=pcansi-m,
583 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
584 lines#25, use=pcansi,
585 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
586 lines#33, use=pcansi,
587 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
588 lines#43, use=pcansi,
590 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
591 # If you want pound signs rather than dollars, replace `B' with `A'
592 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
593 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
594 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
596 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
597 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
598 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
599 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
600 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
601 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
602 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
603 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
604 vpa=\E[%i%p1%dd, use=pcansi-m,
606 ansi+enq|ncurses extension for ANSI ENQ,
607 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
610 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
611 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
612 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
613 ansi|ansi/pc-term compatible with color,
614 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
616 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
617 # all the normal ANSI stuff with no extensions. It assumes
618 # insert/delete line/char is there, so it won't work with
619 # vt100 clones. It assumes video attributes for bold, blink,
620 # underline, and reverse, which won't matter much if the terminal
621 # can't do some of those. Padding is assumed to be zero, which
622 # shouldn't hurt since xon/xoff is assumed.
623 ansi-generic|ansiterm|generic ansi standard terminal,
625 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
626 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
627 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
628 use=ansi+sgrbold, use=ansi+arrows,
630 #### DOS ANSI.SYS variants
632 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
633 # documentation (except for the keyboard key reassignment feature, which
634 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
635 # though undocumented. The <pfkey> capability is untested but should work for
636 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
637 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
638 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
639 OTbs, am, mir, msgr, xon,
641 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
642 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
643 is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
644 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
645 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
646 u7=\E[6n, use=klone+color, use=klone+sgr8,
648 # Keypad: Home=\0G Up=\0H PrPag=\0I
649 # ka1,kh kcuu1 kpp,ka3
651 # Left=\0K 5=\0L Right=\0M
654 # End=\0O Down=\0P NxPag=\0Q
655 # kc1,kend kcud1 kc3,knp
660 # On keyboard with 12 function keys,
661 # shifted f-keys: F13-F24
662 # control f-keys: F25-F36
663 # alt f-keys: F37-F48
664 # The shift/control/alt keys do not modify each other, but alt overrides both,
665 # and control overrides shift.
667 # <pfkey> capability for F1-F48 -TD
668 ansi.sys|ANSI.SYS 3.1 and later versions,
669 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
670 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
671 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
672 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
673 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
674 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
675 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
676 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
677 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
678 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
679 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
680 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
681 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
682 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
683 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
687 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
688 # This should only be used when the terminal emulator cannot redefine the keys.
689 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
690 # definitions must be restored. If the terminal emulator is quit while in vi
691 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
692 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
693 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
694 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
695 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
696 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
697 # Consequently the End keypad key could not be set (it is relatively safe and
698 # actually useful because it sends ^@ O, which beeps and opens a line above).
699 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
700 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
701 \svi\s9-29-86\n\E[;75;8p,
702 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
703 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
704 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
705 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
708 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
709 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
710 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
711 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
714 # See ansi.sysk and nansi.sys above.
715 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
716 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
717 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
718 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
721 #### Atari ST terminals
723 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
725 tw52|tw52-color|Toswin window manager with color,
727 colors#16, pairs#0x100,
728 oc=\Eb?\Ec0, op=\Eb?\Ec0,
729 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
731 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
733 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
735 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
738 tw52-m|Toswin window manager monochrome,
741 bold=\Eya, dch1=\Ea, dim=\EyB,
742 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
743 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
744 smso=\EyQ, smul=\EyH, use=at-m,
745 tt52|Atari TT medium and high resolution,
746 lines#30, use=at-color,
747 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
749 colors#16, pairs#0x100,
750 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
751 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
752 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
753 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
754 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
756 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
757 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
758 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
759 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
761 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
762 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
763 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
764 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
766 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
767 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
768 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
769 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
772 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
774 cols#80, it#8, lines#24,
775 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
776 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
777 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
778 il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
779 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
780 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
781 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
782 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
783 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
784 kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
785 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
786 tw100|toswin vt100 window mgr,
788 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
789 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
791 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
792 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
793 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
794 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
795 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
796 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
797 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
798 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
799 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
800 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
801 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
802 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
803 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
804 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
805 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
806 rmso=\E[m, rmul=\E[m,
807 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
809 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
810 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
812 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
813 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
815 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
816 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
817 # The entries for stv52 and stv52pc probably need a revision.
818 stv52|MiNT virtual console,
820 cols#80, it#8, lines#30,
821 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
822 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
823 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
824 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
825 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
826 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
827 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
828 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
829 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
830 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
831 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
832 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
833 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
834 stv52pc|MiNT virtual console with PC charset,
836 cols#80, it#8, lines#30,
837 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
838 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
839 \363z\362{\343|\366}\234~\371,
840 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
841 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
842 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
843 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
844 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
845 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
846 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
847 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
848 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
849 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
850 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
851 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
854 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
857 cols#80, it#8, lines#25,
858 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
859 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
860 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
861 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
862 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
863 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
864 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
866 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
867 # MiNT VT52 emulation. 80 columns, 25 rows.
868 # MiNT is Now TOS, the operating system which comes with all Ataris now
869 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
870 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
871 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
872 st52-old|Atari ST with VT52 emulation,
875 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
876 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
877 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
878 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
879 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
880 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
881 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
882 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
883 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
886 #### Apple Terminal.app
888 # nsterm*|Apple_Terminal - AppKit Terminal.app
890 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
891 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
892 # Server and Mac OS X operating systems. There is also a
893 # "terminal.app" in GNUstep, but I believe it to be an unrelated
894 # codebase and I have not attempted to describe it here.
896 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
897 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
898 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
899 # version supports color.
901 # To determine the version of Terminal.app you're using by running:
903 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
905 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
907 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
909 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
911 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
913 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
915 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
916 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
917 # might work too, but really you're on your own here since these
918 # systems are very obsolete and I can't test them. I do welcome
919 # patches, though :).
923 # For GNUstep_Terminal, you're probably best off using "linux" or
924 # writing your own terminfo.
926 # For MacTelnet, you're on your own. It's a different codebase, and
927 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
929 # For iTerm.app, see "iterm".
932 # The AppKit Terminal.app descriptions all have names beginning with
933 # "nsterm". Note that the statusline (-s) versions use the window
934 # titlebar as a phony status line, and may produce warnings during
935 # compilation as a result ("tsl uses 0 parameters, expected 1".)
936 # Ignore these warnings, or even ignore these entries entirely. Apps
937 # which need to position the cursor or do other fancy stuff inside the
938 # status line won't work with these entries. They're primarily useful
939 # for programs like Pine which provide simple notifications in the
940 # status line. Please note that non-ASCII characters don't work right
941 # in the status line, since Terminal.app incorrectly interprets their
942 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
943 # versions) or only accepts status lines consisting entirely of
944 # characters from the first 256 Unicode positions (including C1 but
947 # The Mythology* of AppKit Terminal.app:
949 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible
950 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
951 # shareware replacement for Terminal called "Stuart" which NeXT bought
952 # and used as the basis for the Terminal.app in NeXTSTEP 2+,
953 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
954 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
955 # capabilities for the early versions, but I believe that the
956 # TERM_PROGRAM_VERSION may have been reset at some point.
958 # The early versions were tailored to the NeXT character set. Sometime
959 # after the Apple acquisition the encoding was switched to MacRoman
960 # (initially with serious altcharset bugs due to incomplete conversion
961 # of the old NeXT code,) and then later to UTF-8. Also sometime during
962 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
963 # 8-color support (initially buggy when combined with attributes, but
964 # that was later fixed.) More recently, around Mac OS X version 10.3
965 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
966 # some versions (for instance 133-1 which shipped with Mac OS X
967 # version 10.4) this suffered from the <bce> bug, but that seems to
968 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
970 # In the early days of Mac OS X the terminal was fairly buggy and
971 # would routinely crash under load. Many of these bugs seem to have
972 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
973 # some may still remain. This change seems to correspond to
974 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
977 # * This may correspond with what actually happened, but I don't
978 # know. It is based on guesswork, hearsay, private correspondence,
979 # my faulty memory, and the following online sources and references:
981 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
982 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
984 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
985 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
987 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
988 # "nsterm" to comply with the name length and case conventions and
989 # limitations of various software packages [notably Solaris terminfo
990 # and UNIX.] A single Apple_Terminal alias is retained for
991 # backwards-compatibility.
993 # * Added function key support (F1-F4). These only work in Terminal.app
994 # version 51, hopefully the capabilities won't cause problems for people
997 # * Added "full color" (-c) entries which support the 16-color mode in
1000 # * By default, version 51 uses UTF-8 encoding with broken altcharset
1001 # support, so "ASCII" (-7) entries without altcharset support were
1004 # nsterm - AppKit Terminal.app
1006 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
1007 # Terminal.app. It is a partial VT100 emulation with some xterm-like
1008 # extensions. This terminfo was written to describe versions 41
1009 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
1010 # version 10.1) of Terminal.app.
1012 # Terminal.app runs under the Mac OS X Quartz windowing system (and
1013 # other AppKit-supported windowing systems.) On the Mac OS X machine I
1014 # use, the executable for Terminal.app is:
1015 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
1017 # If you're looking for a description of the full-screen system
1018 # console which runs under Apple's Darwin operating system on PowerPC
1019 # platforms, see the "xnuppc" entry instead.
1021 # There were no function keys in version 41. In version 51, there are
1022 # four working function keys (F1, F2, F3 and F4.) The function keys
1023 # are included in all of these entries.
1025 # It does not support mouse pointer position reporting. Under some
1026 # circumstances the cursor can be positioned using option-click; this
1027 # works by comparing the cursor position and the selected position,
1028 # and simulating enough cursor-key presses to move the cursor to the
1029 # selected position. This technique fails in all but the simplest
1032 # It provides partial ANSI color support (background colors interacted
1033 # badly with bold in version 41, though, as reflected in :ncv:.) The
1034 # monochrome (-m) entries are useful if you've disabled color support
1035 # or use a monochrome monitor. The full color (-c) entries are useful
1036 # in version 51, which doesn't exhibit the background color bug. They
1037 # also enable an xterm-compatible 16-color mode.
1039 # The configurable titlebar is set using xterm-compatible sequences;
1040 # it is used as a status bar in the statusline (-s) entries. Its width
1041 # depends on font sizes and window sizes, but 50 characters seems to
1042 # be the default for an 80x24 window.
1044 # The MacRoman character encoding is used for some of the alternate
1045 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
1046 # disable alternate character set support entirely, and the "VT100"
1047 # (-acs) entries rely instead on Terminal.app's own buggy VT100
1048 # graphics emulation, which seems to think the character encoding is
1049 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
1050 # are useful in Terminal.app version 51, which supports UTF-8 and
1051 # other ASCII-compatible character encodings but does not correctly
1052 # implement VT100 graphics; once VT100 graphics are correctly
1053 # implemented in Terminal.app, the "VT100" (-acs) entries should be
1054 # usable in any ASCII-compatible character encoding [except perhaps
1055 # in UTF-8, where some experts argue for disallowing alternate
1056 # characters entirely.]
1058 # Terminal.app reports "vt100" as the terminal type, but exports
1059 # several environment variables which may aid detection in a shell
1060 # profile (i.e. .profile or .login):
1063 # TERM_PROGRAM=Apple_Terminal
1064 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
1065 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
1067 # For example, the following Bourne shell script would detect the
1068 # correct terminal type:
1070 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
1073 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
1081 # In a C shell derivative, this would be accomplished by:
1083 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
1084 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
1085 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
1086 # setenv TERM "nsterm-old"
1088 # setenv TERM "nsterm-c-7"
1093 # The '+' entries are building blocks
1094 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
1095 am, bw, msgr, xenl, xon,
1096 cols#80, it#8, lines#24,
1097 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
1098 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1099 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
1100 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1101 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
1102 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
1103 ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
1104 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
1105 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1106 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1107 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1108 %p5%t;2%;%?%p7%t;8%;m,
1109 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1110 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
1112 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
1113 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1114 enacs=\E(B\E)0, rmacs=^O,
1115 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1116 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1117 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1119 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
1120 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i
1121 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
1122 \271|\255}\243~\245,
1123 enacs=\E(B\E)0, rmacs=^O,
1124 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1125 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1126 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1128 # compare with xterm+sl-twm
1129 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
1130 wsl#50, use=xterm+sl-twm,
1132 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
1133 op=\E[0m, use=ibm+16color,
1135 nsterm+c41|AppKit Terminal.app v41 color support,
1136 colors#8, ncv#37, pairs#64,
1137 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1139 # These are different combinations of the building blocks
1141 # ASCII charset (-7)
1142 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
1145 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
1146 use=nsterm+s, use=nsterm+7,
1148 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
1149 use=nsterm+c41, use=nsterm+7,
1151 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
1152 use=nsterm+c, use=nsterm+7,
1154 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
1155 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
1157 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
1158 use=nsterm+s, use=nsterm+c, use=nsterm+7,
1160 # VT100 alternate-charset (-acs)
1161 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
1164 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
1165 use=nsterm+s, use=nsterm+acs,
1167 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
1168 use=nsterm+c41, use=nsterm+acs,
1170 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
1171 use=nsterm+c, use=nsterm+acs,
1173 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
1174 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
1176 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
1177 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
1180 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
1183 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
1184 use=nsterm+s, use=nsterm+mac,
1186 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
1187 use=nsterm+c41, use=nsterm+mac,
1189 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
1190 use=nsterm+c, use=nsterm+mac,
1192 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
1193 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
1195 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
1196 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
1198 # In Mac OS X version 10.5 the format of the preferences has changed
1199 # and a new, more complex technique is needed, e.g.,
1201 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
1202 # "NSUserDefaults");ud=NSUserDefaults.alloc();
1203 # ud.init();prefs=ud.persistentDomainForName_(
1204 # "com.apple.Terminal");prefs["Window Settings"][
1205 # prefs["Default Window Settings"]]["TerminalType"
1206 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
1207 # "com.apple.Terminal")' nsterm-16color
1209 # and it is still not settable from the preferences dialog. This is
1210 # tracked under rdar://problem/7365108 and rdar://problem/7365134
1211 # in Apple's bug reporter.
1213 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
1214 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
1215 # vt52, vt100, vt102 and xterm.
1216 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
1218 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
1219 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
1220 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
1221 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1222 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1223 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
1224 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
1225 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
1226 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
1227 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
1229 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
1230 # the background color erase feature. The newer version 240.2 in Mac OS X
1231 # version 10.5 does not.
1233 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
1234 # and D P Schreber comparing to nsterm-c-s-acs.
1236 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
1237 # can be set in Terminal.app, e.g.,
1239 # defaults write com.apple.Terminal TermCapString nsterm-bce
1241 # and that it is not set in Terminal's preferences dialog.
1243 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
1246 # * The terminal description matches the default settings.
1247 # * The keyboard is configurable via a dialog.
1248 # * By default khome, kend, knext and kprev are honored only with a
1250 # * There are bindings for control left/right arrow (but not up/down).
1251 # Added those to nsterm-16color, which is the version used for OS X 10.6
1252 # * "Allow VT100 application keypage mode" is by default disabled.
1253 # There is no way to press keypad-comma unless application mode is enabled
1255 # * 132-column mode stopped working during vttest's tests. Consider it broken.
1256 # * CHT, REP, SU, SD are buggy.
1257 # * ECH works (also in Leopard), but is not used here for compatibility.
1258 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
1259 # xterm-256color. However, it adds "nsterm", so it is possible to use the
1260 # nsterm entry from this file to override the MacPorts (20110404) or
1261 # system (20081102) copy of this file.
1262 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
1263 # dialog defaults to xterm-256color. Alternative selections are ansi,
1264 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
1265 # the menu says "Declare terminal as" without promising to actually emulate
1266 # the corresponding terminals. Indeed, changing TERM does not affect the
1267 # emulation itself. This means that
1268 # + the function-keys do not match for dtterm for kf1-kf4 as well as
1270 # + the color model is the same for each setting of TERM (does not match
1272 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
1273 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
1274 # + the vt52 emulation does not give a usable shell because screen-clearing
1275 # does not work as expected.
1276 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
1277 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
1278 # as well as unmasking F10 (which had been used in the window manager). Those
1279 # keys are listed in this entry.
1280 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
1281 bce, use=nsterm-16color,
1283 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
1284 # TERM_PROGRAM_VERSION=309
1285 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
1286 # TERM_PROGRAM_VERSION=303
1287 nsterm-256color|Terminal.app in OS X 10.8,
1288 use=xterm+256setaf, use=nsterm-bce,
1290 nsterm-build326|Terminal.app in OS X 10.9,
1291 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
1292 kf18=\E[32~, kDC5=\E[3;5~, kDC7=\E[3;5~, kLFT3=\Eb,
1293 kLFT5=\E[1;5D, kRIT3=\Ef, kRIT5=\E[1;5C,
1294 use=nsterm-256color,
1297 nsterm-build343|Terminal.app in OS X 10.10,
1298 kend=\EOF, khome=\EOH, use=nsterm-build326,
1300 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
1302 # + no vt52 mode for cursor keys, though vt52 screen works in vttest
1303 # + f1-f4 map to pf1-pf4
1304 # + no vt220 support aside from DECTCEM and ECH
1305 # + there are no protected areas. Forget about anything above vt220.
1306 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
1307 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
1308 # + but bce fails for 11.6.7.2 (test repeat).
1309 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
1310 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
1311 # + normal (not X10 or Highlight tracking) mouse now works.
1312 # + mouse any-event works
1313 # + mouse button-event works
1314 # + in alternate screen:
1316 # mode 1047 fails to restore cursor position (do not use)
1317 # mode 1049 fails to restore screen contents (do not use)
1318 # + dtterm window-modify operations work (some messages are not printed)
1319 # + dtterm window-report gives size of window in characters/pixels as
1320 # well as state of window.
1322 # + there is no difference between cnorm/cvvis
1323 # + has dim/invis/blink (no protect of course)
1324 # + most function keys with shift/control modifiers give beep
1325 # (user can configure, but out-of-the-box is what I record)
1326 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
1328 # + kLFT5/kRIT5 work, but not up/down with control-modifier
1329 # + kLFT/kRIT work, but not up/down with shift-modifier
1330 # + there are a few predefined bindings with Alt, but no clear pattern.
1331 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
1332 # Using ncurses test-program with xterm-new:
1334 # Using xterm's scripts:
1335 # + palette for 256-colors is hardcoded.
1336 # + no support for "dynamic colors"
1337 # + no support for tcap-query.
1338 nsterm-build361|Terminal.app in OS X 10.11,
1339 kmous=\E[M, use=nsterm-build343,
1341 # This is an alias which should always point to the "current" version
1342 nsterm|Apple_Terminal|AppKit Terminal.app,
1343 use=nsterm-build361,
1345 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
1346 # more featureful) terminal emulator for Mac OS X. It is similar
1347 # enough in capabilities to nsterm-16color that I have derived this
1348 # description from that one, but as far as I know they share no code.
1349 # Many of the features are user-configurable, but I attempt only to
1350 # describe the default configuration.
1352 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
1354 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
1356 csr@, dim@, kend=\EOF, khome=\EOH,
1357 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
1358 %p7%t;8%;m%?%p9%t\016%e\017%;,
1359 use=xterm+256setaf, use=nsterm-16color,
1361 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
1363 # On PowerPC platforms, Apple's Darwin operating system uses a
1364 # full-screen system console derived from a NetBSD framebuffer
1365 # console. It is an ANSI-style terminal, and is not really VT-100
1368 # Under Mac OS X, this is the system console driver used while in
1369 # single-user mode [reachable by holding down Command-S during the
1370 # boot process] and when logged in using console mode [reachable by
1371 # typing ">console" at the graphical login prompt.]
1373 # If you're looking for a description of the Terminal.app terminal
1374 # emulator which runs under the Mac OS X Quartz windowing system (and
1375 # other AppKit-supported windowing systems,) see the "nsterm"
1378 # NOTE: Under Mac OS X version 10.1, the default login window does not
1379 # prompt for user name, instead requiring an icon to be selected from
1380 # a list of known users. Since the special ">console" login is not in
1381 # this list, you must make one of two changes in the Login Window
1382 # panel of the Login section of System Prefs to make the special
1383 # ">console" login accessible. The first option is to enable 'Show
1384 # "Other User" in list for network users', which will add a special
1385 # "Other..." icon to the graphical login panel. Selecting "Other..."
1386 # will present the regular graphical login prompt. The second option
1387 # is to change the 'Display Login Window as:' setting to 'Name and
1388 # password entry fields', which replaces the login panel with a
1389 # graphical login prompt.
1391 # There are no function keys, at least not in Darwin 1.3.
1393 # It has no mouse support.
1395 # It has full ANSI color support, and color combines correctly with
1396 # all three supported attributes: bold, inverse-video and underline.
1397 # However, bold colored text is almost unreadable (bolding is
1398 # accomplished using shifting and or-ing, and looks smeared) so bold
1399 # has been excluded from the list of color-compatible attributes
1400 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
1401 # monochrome monitor.
1403 # There is one serious bug with this terminal emulation's color
1404 # support: repositioning the cursor onto a cell with non-matching
1405 # colors obliterates that cell's contents, replacing it with a blank
1406 # and displaying a colored cursor in the "current" colors. There is
1407 # no complete workaround at present [other than using the monochrome
1408 # (-m) entries,] but removing the (msgr) capability seemed to help.
1410 # The "standout" chosen was simple reverse-video, although a colorful
1411 # standout might be more aesthetically pleasing. Similarly, the bold
1412 # chosen is the terminal's own smeared bold, although a simple
1413 # color-change might be more readable. The color-bold (-b) entries
1414 # uses magenta colored text for bolding instead. The fancy color (-f
1415 # and -f2) entries use color for bold, standout and underlined text
1416 # (underlined text is still underlined, though.)
1418 # Apparently the terminal emulator does support a VT-100-style
1419 # alternate character set, but all the alternate character set
1420 # positions have been left blank in the font. For this reason, no
1421 # alternate character set capabilities have been included in this
1422 # description. The console driver appears to be ASCII-only, so (enacs)
1423 # has been excluded [although the VT-100 sequence does work.]
1425 # The default Mac OS X and Darwin installation reports "vt100" as the
1426 # terminal type, and exports no helpful environment variables. To fix
1427 # this, change the "console" entry in /etc/ttys from "vt100" to
1428 # "xnuppc-WxH", where W and H are the character dimensions of your
1429 # console (see below.)
1431 # The font used by the terminal emulator is apparently one originally
1432 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
1433 # file includes descriptions for the following geometries:
1435 # Pixels Characters Entry Name (append -m for monochrome)
1436 # -------------------------------------------------------------------
1437 # 640x400 80x25 xnuppc-80x25
1438 # 640x480 80x30 xnuppc-80x30
1439 # 720x480 90x30 xnuppc-90x30
1440 # 800x600 100x37 xnuppc-100x37
1441 # 896x600 112x37 xnuppc-112x37
1442 # 1024x640 128x40 xnuppc-128x40
1443 # 1024x768 128x48 xnuppc-128x48
1444 # 1152x768 144x48 xnuppc-144x48
1445 # 1280x1024 160x64 xnuppc-160x64
1446 # 1600x1024 200x64 xnuppc-200x64
1447 # 1600x1200 200x75 xnuppc-200x75
1448 # 2048x1536 256x96 xnuppc-256x96
1450 # The basic "xnuppc" entry includes no size information, and the
1451 # emulator includes no reporting capability, so you'll be at the mercy
1452 # of the TTY device (which reports incorrectly on my hardware.) The
1453 # color-bold entries do not include size information.
1455 # The '+' entries are building blocks
1456 xnuppc+basic|Darwin PowerPC Console basic capabilities,
1459 bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1460 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
1461 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1462 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
1463 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?,
1464 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
1465 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
1466 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1468 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1469 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1470 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
1472 xnuppc+c|Darwin PowerPC Console ANSI color support,
1473 colors#8, ncv#32, pairs#64,
1474 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1476 xnuppc+b|Darwin PowerPC Console color-bold support,
1479 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1482 xnuppc+f|Darwin PowerPC Console fancy color support,
1484 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
1486 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
1488 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
1491 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
1492 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
1494 # Building blocks for specific screen sizes
1495 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
1498 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
1501 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
1504 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
1507 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
1510 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
1513 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
1516 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
1519 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
1522 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
1525 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
1528 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
1529 cols#0x100, lines#96,
1531 # These are different combinations of the building blocks
1533 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
1536 xnuppc|darwin|Darwin PowerPC Console (color),
1537 use=xnuppc+c, use=xnuppc+basic,
1539 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
1542 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
1543 use=xnuppc+b, use=xnuppc+c,
1545 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
1548 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
1549 use=xnuppc+f, use=xnuppc+c,
1551 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
1554 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
1555 use=xnuppc+f2, use=xnuppc+c,
1557 # Combinations for specific screen sizes
1558 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
1559 use=xnuppc+80x25, use=xnuppc+basic,
1561 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
1562 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
1564 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
1565 use=xnuppc+80x30, use=xnuppc+basic,
1567 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
1568 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
1570 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
1571 use=xnuppc+90x30, use=xnuppc+basic,
1573 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
1574 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
1576 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
1577 use=xnuppc+100x37, use=xnuppc+basic,
1579 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
1580 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
1582 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
1583 use=xnuppc+112x37, use=xnuppc+basic,
1585 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
1586 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
1588 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
1589 use=xnuppc+128x40, use=xnuppc+basic,
1591 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
1592 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
1594 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
1595 use=xnuppc+128x48, use=xnuppc+basic,
1597 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
1598 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
1600 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
1601 use=xnuppc+144x48, use=xnuppc+basic,
1603 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
1604 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
1606 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
1607 use=xnuppc+160x64, use=xnuppc+basic,
1609 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
1610 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
1612 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
1613 use=xnuppc+200x64, use=xnuppc+basic,
1615 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
1616 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
1618 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
1619 use=xnuppc+200x75, use=xnuppc+basic,
1621 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
1622 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
1624 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
1625 use=xnuppc+256x96, use=xnuppc+basic,
1627 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
1628 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
1633 # BeOS entry for Terminal program Seems to be almost ANSI
1634 beterm|BeOS Terminal,
1635 am, eo, mir, msgr, xenl, xon,
1636 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
1637 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
1638 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1639 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
1640 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1641 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1642 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
1643 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1644 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
1645 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
1646 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
1647 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
1648 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
1649 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
1650 nel=\r\n, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
1651 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
1652 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1653 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
1654 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
1655 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
1661 # This entry is good for the 1.2.13 or later version of the Linux console.
1663 # ***************************************************************************
1666 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
1667 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
1668 # * character. Here are the keymap replacement lines that will set this up: *
1670 # keycode 15 = Tab Tab
1671 # alt keycode 15 = Meta_Tab
1672 # shift keycode 15 = F26
1673 # string F26 ="\033[Z"
1675 # * This has to use a key slot which is unfortunate (any unused one will *
1676 # * do, F26 is the higher-numbered one). The change ought to be built *
1677 # * into the kernel tables. *
1679 # ***************************************************************************
1681 # All linux kernels since 1.2.13 (at least) set the screen size
1682 # themselves; this entry assumes that capability.
1684 linux-basic|linux console,
1685 am, bce, eo, mir, msgr, xenl, xon,
1687 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1688 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1689 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1690 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1691 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1692 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1693 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1694 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1695 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
1696 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1697 il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
1698 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1699 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
1700 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1701 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1702 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
1703 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1704 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1705 kspd=^Z, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1706 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
1707 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1708 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1709 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
1710 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
1713 linux-m|Linux console no color,
1715 setab@, setaf@, setb@, setf@, use=linux,
1717 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1718 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1719 # not supposedly back-portable to older SV curses (although it has worked fine
1720 # on Solaris for several years) and not supported in ncurses versions before
1722 linux-c-nc|linux console with color-change,
1724 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
1725 %02x%p4%{255}%*%{1000}%/%02x,
1726 oc=\E]R, use=linux-basic,
1727 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1728 linux-c|linux console 1.3.6+ for older ncurses,
1730 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1731 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1732 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1733 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1734 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1735 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1736 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1737 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1739 oc=\E]R, use=linux-basic,
1741 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1742 # get a block cursor for cvvis.
1743 # reported by Frank Heckenbach <frank@g-n-u.de>.
1744 linux2.2|linux 2.2.x console,
1745 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1746 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1748 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1749 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1750 # Although the kernel has mappings for these, they were not in the default
1751 # font (tested with Debian and Fedora):
1757 linux2.6|linux 2.6.x console,
1758 acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
1760 enacs=\E)0, rmacs=^O,
1761 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1762 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1763 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1765 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1766 # It is the same as xterm's erase-saved-lines feature.
1767 linux3.0|linux 3.0 kernels,
1768 E3=\E[3J, use=linux2.6,
1770 # This is Linux console for ncurses.
1771 linux|linux console,
1774 # Subject: linux 2.6.26 vt back_color_erase
1775 # Changes to the Linux console driver broke bce model as reported in
1776 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1778 # http://lkml.org/lkml/2008/4/26/305
1779 # http://lkml.org/lkml/2008/10/3/66
1780 linux2.6.26|linux console w/o bce,
1783 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1784 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1785 ich@, ich1@, use=linux,
1787 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1788 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1789 linux-koi8|linux with koi8 alternate character set,
1790 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1791 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1792 \211w\210x\201y\230z\231{\267|\274~\224,
1793 use=linux, use=klone+koi8acs,
1795 # Another entry for KOI8-r with Qing Long's acsc.
1796 # (which one better complies with the standard?)
1797 linux-koi8r|linux with koi8-r alternate character set,
1798 use=linux, use=klone+koi8acs,
1800 # Entry for the latin1 and latin2 fonts
1801 linux-lat|linux with latin1 or latin2 alternate character set,
1802 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1803 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1804 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1807 # This uses graphics from VT codeset instead of from cp437.
1808 # reason: cp437 (aka "straight to font") is not functional under luit.
1809 # from: Andrey V Lukyanov <land@long.yar.ru>.
1810 linux-vt|linux console using VT codes for graphics,
1811 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1813 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1816 # This is based on the Linux console (relies on the console to perform some
1817 # of the functionality), but does not recognize as many control sequences.
1818 # The program comes bundled with an old (circa 1998) copy of the Linux
1819 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1820 # \E* move cursor to home, as as \E[H
1822 # \EE move cursor to beginning of row
1823 # \E[y,xf same as \E[y,xH
1825 # Note: The status-line support is buggy (dsl does not work).
1826 kon|kon2|jfbterm|Kanji ON Linux console,
1828 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1829 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1833 # Another variant. There are two parts (src, src/lib) with the latter
1834 # comprising the escape-sequence parsing. The copyright notice on that
1835 # says it is based on GTerm by Timothy Miller.
1837 # The original developer "dragchan" has left, but as of March 2017 there is
1838 # (still dead) code from May 2015 here:
1839 # https://github.com/izmntuk/fbterm
1841 # The acsc string may be incorrect.
1843 # Not used here, the program recognizes escapes for italic, underline and
1844 # dim, rendering those as green, cyan and gray respectively.
1845 fbterm|FbTerm for Linux with framebuffer,
1846 colors#0x100, pairs#0x7fff,
1847 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1848 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1849 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1850 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
1851 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
1852 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1853 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1854 sgr0=\E[0;10m, smacs=\E[11m, use=linux,
1856 # 16-color linux console entry; this works with a 256-character
1857 # console font but bright background colors turn into dim ones when
1858 # you use a 512-character console font. This uses bold for bright
1859 # foreground colors and blink for bright background colors.
1860 linux-16color|linux console with 16 colors,
1861 colors#16, ncv#42, pairs#0x100,
1862 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1863 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
1866 # bterm (bogl 0.1.18)
1867 # Implementation is in bogl-term.c
1868 # Key capabilities from linux terminfo entry
1871 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1872 # bterm does not support sgr, since it only processes one parameter -TD
1873 bterm|bogl virtual terminal,
1875 colors#8, cols#80, lines#24, pairs#64,
1876 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1877 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
1878 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=\n,
1879 kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1880 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1881 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1882 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1883 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1884 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1885 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1886 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n,
1887 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1888 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1889 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1894 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1897 cols#80, it#8, lines#25,
1898 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
1899 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1900 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1901 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1902 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
1903 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1904 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1905 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1906 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1907 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1908 smso=\E[7m, smul=\E[4m,
1909 mach-bold|Mach Console with bold instead of underline,
1910 rmul=\E[0m, smul=\E[1m, use=mach,
1911 mach-color|Mach Console with ANSI color,
1913 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1914 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1916 # From: Samuel Thibault
1917 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1918 # Files: i386/i386at/kd.c
1920 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1922 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
1923 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
1924 \263y\363z\362{\343|\330}\234~\376,
1925 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1926 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1927 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1928 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1929 2%;%?%p6%t;1%;%?%p7%t;8%;m,
1932 mach-gnu-color|Mach Console with ANSI color,
1934 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1935 setaf=\E[3%p1%dm, use=mach-gnu,
1937 # From: Marcus Brinkmann
1938 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1940 # Comments in the original are summarized here:
1942 # hurd uses 8-bit characters (km).
1944 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1946 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1947 # have the eat_newline_glitch. It doesn't support setting or removing tab
1950 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1951 # one byte instead three.
1953 # <ich1> is not included because hurd has insert mode.
1955 # hurd doesn't use ^J for scrolling, because this could put things into the
1956 # scrollback buffer.
1958 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1959 # This is a GNU extension.
1961 # The original has commented-out ncv, but is restored here.
1963 # Reading the source, RIS resets cnorm, but not xmous.
1964 hurd|The GNU Hurd console server,
1965 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1966 colors#8, it#8, ncv#18, pairs#64,
1967 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1969 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1970 clear=\Ec, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1971 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1972 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1973 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1974 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1975 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1976 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1977 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1978 invis=\E[8m, kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\EOD,
1979 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1980 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1981 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1982 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1983 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1984 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1985 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1986 kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1987 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1988 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1989 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1990 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1991 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1992 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1993 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
2000 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
2001 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
2002 # right corner without triggering a scroll. The ncurses terminfo library can
2003 # handle this case with the <ich1> capability, and prefers <am> for better
2004 # optimization. Bug: The <op> capability resets attributes.
2005 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
2006 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
2007 qnx|qnx4|qnx console,
2008 daisy, km, mir, msgr, xhpa, xt,
2009 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
2010 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
2011 \303u\264v\301w\302x\263,
2012 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
2013 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
2014 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
2015 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
2016 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
2017 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
2018 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
2019 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
2020 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
2021 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
2022 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
2023 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
2024 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
2025 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
2026 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
2027 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
2028 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
2029 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
2030 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
2031 kext=\377\270, kf1=\377\201, kf10=\377\212,
2032 kf11=\377\256, kf12=\377\257, kf13=\377\213,
2033 kf14=\377\214, kf15=\377\215, kf16=\377\216,
2034 kf17=\377\217, kf18=\377\220, kf19=\377\221,
2035 kf2=\377\202, kf20=\377\222, kf21=\377\223,
2036 kf22=\377\224, kf23=\377\333, kf24=\377\334,
2037 kf25=\377\225, kf26=\377\226, kf27=\377\227,
2038 kf28=\377\230, kf29=\377\231, kf3=\377\203,
2039 kf30=\377\232, kf31=\377\233, kf32=\377\234,
2040 kf33=\377\235, kf34=\377\236, kf35=\377\276,
2041 kf36=\377\277, kf37=\377\321, kf38=\377\322,
2042 kf39=\377\323, kf4=\377\204, kf40=\377\324,
2043 kf41=\377\325, kf42=\377\326, kf43=\377\327,
2044 kf44=\377\330, kf45=\377\331, kf46=\377\332,
2045 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
2046 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
2047 khlp=\377\350, khome=\377\240, khts=\377\342,
2048 kich1=\377\253, kil1=\377\273, kind=\377\261,
2049 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
2050 knp=\377\252, knxt=\377\312, kopn=\377\357,
2051 kopt=\377\353, kpp=\377\242, kprt=\377\255,
2052 kprv=\377\302, krdo=\377\336, kref=\377\354,
2053 kres=\377\360, krfr=\377\347, kri=\377\271,
2054 krmir=\377\313, krpl=\377\362, krst=\377\352,
2055 ksav=\377\361, kslt=\377\247, kspd=\377\335,
2056 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
2057 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
2058 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
2059 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
2063 qnxt|qnxt4|QNX4 terminal,
2066 qnxm|QNX4 with mouse events,
2068 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
2069 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
2070 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
2071 smicm=\E/>2h, use=qnx4,
2076 # Monochrome QNX4 terminal or console. Setting this terminal type will
2077 # allow an application running on a color console to behave as if it
2078 # were a monochrome terminal. Output will be through stdout instead of
2079 # console writes because the term routines will recognize that the
2080 # terminal name starts with 'qnxt'.
2082 qnxtmono|Monochrome QNX4 terminal or console,
2086 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
2087 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
2088 # (TD: derive from original qnx4 entry)
2089 qnxt2|qnx 2.15 serial terminal,
2091 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
2092 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
2094 # QNX ANSI terminal definition
2097 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
2098 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2099 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2100 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=\r,
2101 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
2102 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2103 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
2104 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
2105 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
2106 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
2107 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
2108 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
2109 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
2110 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
2111 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
2112 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
2113 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
2114 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
2115 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
2116 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
2117 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
2118 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
2119 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
2120 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
2121 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
2122 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
2123 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
2124 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
2125 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
2126 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
2127 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
2128 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
2129 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
2130 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
2131 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
2132 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
2133 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
2134 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
2135 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
2136 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2137 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2139 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
2141 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
2142 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
2143 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
2144 smul=\E[4m, tbc=\E[3g,
2145 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
2147 qansi|QNX ansi with console writes,
2148 daisy, xhpa, use=qansi-g,
2150 qansi-t|QNX ansi without console writes,
2153 qansi-m|QNX ansi with mouse,
2155 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
2156 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
2157 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
2158 smicm=\E[>2h, use=qansi,
2160 qansi-w|QNX ansi for windows,
2165 # SCO console and SOS-Syscons console for 386bsd
2166 # (scoansi: had unknown capabilities
2167 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
2168 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
2169 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
2170 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
2171 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
2172 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
2173 # on the <smacs>=\E[12m -- esr)
2175 # klone+sgr-dumb is an error since the acsc does not match -TD
2177 # In this description based on SCO's keyboard(HW) manpage list of default
2178 # function key values:
2179 # F13-F24 are shifted F1-F12
2180 # F25-F36 are control F1-F12
2181 # F37-F48 are shift+control F1-F12
2183 # hpa/vpa work in the console, but not in scoterm:
2187 # SCO's terminfo uses
2190 # which do not work (console or scoterm).
2192 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
2193 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
2194 OTbs, am, bce, eo, xon,
2195 colors#8, cols#80, it#8, lines#25, pairs#64,
2196 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM
2197 NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB
2199 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
2200 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
2201 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2202 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2203 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
2204 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
2205 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
2206 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
2207 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
2208 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2209 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2210 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
2211 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
2212 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
2213 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
2214 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
2215 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
2216 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
2217 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
2218 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
2219 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
2220 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
2221 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2222 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
2223 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
2224 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
2226 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
2227 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
2228 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
2229 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
2230 %p7%t;8%;%?%p9%t;12%e;10%;m,
2231 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
2232 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
2233 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
2234 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
2235 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
2237 # make this easy to change...
2238 scoansi|SCO Extended ANSI standard crt,
2243 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
2244 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
2245 # for the application keypad mode. We have added iris-ansi-ap rather than
2246 # change the original to keypad mode.
2248 # (iris-ansi: added rmam/smam based on init string -- esr)
2250 # This entry, and those derived from it, is used in xwsh (also known as
2251 # winterm). Some capabilities that do not fit into the terminfo model
2252 # include the shift- and control-functionkeys:
2254 # F1-F12 generate different codes when shift or control modifiers are used.
2258 # control-F1 \E[025q
2260 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
2261 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
2263 # The cursor keys also have different codes:
2264 # control-up \E[162q
2265 # control-down \E[165q
2266 # control-left \E[159q
2267 # control-right \E[168q
2270 # shift-down \E[164q
2271 # shift-left \E[158q
2272 # shift-right \E[167q
2274 # control-tab \[072q
2276 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
2278 cols#80, it#8, lines#40,
2279 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
2280 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
2281 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
2282 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
2283 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
2284 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
2285 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2286 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
2287 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
2288 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2289 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
2290 kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
2291 kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
2292 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
2293 kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
2294 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
2295 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
2296 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2297 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
2299 iris-ansi-ap|IRIS ANSI in application-keypad mode,
2300 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
2301 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
2303 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
2304 # (T.Dickey 98/1/24)
2305 iris-color|xwsh|IRIX ANSI with color,
2307 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
2308 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
2309 rmul=\E[24m, rs1=\Ec,
2310 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2311 sitm=\E[3m, use=vt100+enq, use=klone+color,
2314 #### OpenBSD consoles
2316 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
2318 # The following terminal descriptions for the AMD/Intel PC console
2319 # were prepared based on information contained in the OpenBSD-4.9
2320 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
2322 # Added bce based on testing with tack -TD
2323 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
2324 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
2326 # Notes from testing with vttest:
2327 # fails wrapping test
2329 # identifies as vt200 with selective erase, but does not implement DECSCA
2332 # ESC # 8 DEC Screen Alignment Test (DECALN).
2333 # CSI ? 5 h Reverse Video (DECSCNM).
2335 pccon+keys|OpenBSD PC keyboard keys,
2336 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2337 kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
2338 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2339 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2340 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
2341 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
2342 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2343 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2345 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
2346 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y
2348 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
2350 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
2351 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2353 enacs=\E)0$<5>, rmacs=\E(B$<5>,
2354 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
2356 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
2357 # underline renders as color
2358 pccon+colors|ANSI colors for OpenBSD PC console,
2360 colors#8, ncv#2, pairs#64,
2361 op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2362 pccon+base|base capabilities for OpenBSD PC console,
2363 am, km, mc5i, msgr, npc, nxon, xenl, xon,
2364 cols#80, it#8, lines#24,
2365 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
2366 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
2367 dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
2368 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2369 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2370 rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h,
2371 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
2373 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
2374 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
2375 pccon0|OpenBSD PC console with simple ASCII pseudographics,
2376 use=pccon0-m, use=pccon+colors,
2377 pccon-m|OpenBSD PC console without colors,
2378 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
2379 pccon|OpenBSD PC console,
2380 use=pccon-m, use=pccon+colors,
2382 #### NetBSD consoles
2384 # pcvt termcap database entries (corresponding to release 3.31)
2385 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
2387 # (For the terminfo master file, I translated these into terminfo syntax.
2388 # Then I dropped all the pseudo-HP entries. we don't want and can't use
2389 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
2390 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
2392 # NOTE: <ich1> has been taken out of this entry. for reference, it should
2393 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
2394 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
2395 pcvtXX|pcvt vt200 emulator (DEC VT220),
2396 am, km, mir, msgr, xenl,
2398 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
2400 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2401 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
2402 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2403 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2404 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2405 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2406 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2407 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
2408 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
2409 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2410 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
2411 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
2412 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
2413 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
2414 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
2415 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
2416 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2417 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2418 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2420 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2421 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2422 # 50 lines entries; 80 columns
2423 pcvt25|dec vt220 emulation with 25 lines,
2425 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2426 pcvt28|dec vt220 emulation with 28 lines,
2428 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2429 pcvt35|dec vt220 emulation with 35 lines,
2431 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2432 pcvt40|dec vt220 emulation with 40 lines,
2434 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2435 pcvt43|dec vt220 emulation with 43 lines,
2437 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2438 pcvt50|dec vt220 emulation with 50 lines,
2440 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2442 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2443 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2444 # 50 lines entries; 132 columns
2445 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
2447 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2448 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
2450 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2451 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
2453 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2454 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
2456 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2457 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
2459 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2460 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
2462 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2464 # OpenBSD implements a color variation
2465 pcvt25-color|dec vt220 emulation with 25 lines and color,
2467 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
2468 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2469 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2470 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2471 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
2474 # Terminfo entries to enable the use of the ncurses library in colour on a
2475 # NetBSD-arm32 console (only tested on a RiscPC).
2476 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
2477 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
2478 # typo in invis - TD
2479 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
2480 am, bce, msgr, xenl, xon,
2481 cols#80, it#8, lines#30,
2482 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2483 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2484 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2485 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2486 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2487 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2488 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2489 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
2490 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
2491 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2492 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
2493 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
2494 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
2495 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
2496 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2498 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2499 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
2500 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2501 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
2504 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
2505 cols#132, lines#50, use=arm100,
2507 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
2508 # manufactured by Sharp for the Japanese market.
2509 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
2510 x68k|x68k-ite|NetBSD/x68k ITE,
2512 kclr=\E[9~, khlp=\E[28~, use=vt220,
2515 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
2517 # (still unfinished, but good enough so far.)
2518 ofcons|DNARD OpenFirmware console,
2521 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
2522 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
2523 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
2524 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
2525 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
2526 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
2527 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
2528 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
2529 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
2530 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
2531 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
2532 rmso=\2330m, rmul=\2330m,
2533 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
2534 %;%?%p1%p3%|%t;7%;m,
2535 sgr0=\2330m, smso=\2337m, smul=\2334m,
2537 # NetBSD "wscons" emulator in vt220 mode.
2538 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
2539 # The emulator renders underlined text in red. Colors are otherwise usable.
2541 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
2542 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
2543 # vt220 screens in vttest do not work with this emulator. For instance, it
2544 # identifies itself (primary DA response) as a vt220 with selective erase. But
2545 # the selective erase feature does not work. The secondary response is copied
2546 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
2547 # the level of detail in a termcap, it is a passable emulator, since ECH does
2548 # work. Don't use it on a VMS system -TD
2549 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
2551 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
2552 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
2553 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
2554 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2555 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2556 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
2557 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
2559 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
2562 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
2564 # TERM is by default vt100 for the console, wsvt25 for other ttys.
2565 # Initial testing set TERM=xterm, based on comments by developers, found too
2566 # many differences to continue in that path. However, test-results may be
2567 # useful to people curious about compatibility with xterm.
2569 # Testing with tack:
2571 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
2572 # There is color-bleeding in the color-pairs screen.
2573 # Attributes do not work with color
2575 # Failed: kf1-kf4, kf13-kf48, khome, kend
2576 # (effectively xterm-r6 for function-keys)
2577 # None of the function or cursor key-modifiers are encoded.
2578 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
2580 # Testing with vttest:
2581 # -------------------
2582 # Identifies as vt220 with selective erase
2583 # (however, selective erase refers to DECSCA, SPA)
2584 # Does not implement vt52
2585 # Uses spaces to simulate double-size characters
2586 # Does not support 8-bit controls
2587 # Does not support VT220 reports
2588 # Does not support send/receive mode
2589 # Supports ECH (like rxvt)
2590 # Does not support DECSCA
2591 # Does not support any of the ISO-6429 cursor-movement
2592 # Does not support any of the ISO-6429 miscellaneous tests
2593 # (SL/SR also leave unexpected char on screen too)
2594 # Background does not change in menu 11.6.9 (SGR 22-27)
2595 # None of the xterm special features tests work
2596 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
2599 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
2601 rcons|BSD rasterconsole,
2603 # Color version of above. Color currently only provided by NetBSD.
2604 rcons-color|BSD rasterconsole with ANSI color,
2607 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
2609 # mgterm -- MGL/MGL2, MobileGear Graphic Library
2610 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
2611 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
2612 # -- compare with cons25w
2614 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
2615 colors#8, cols#80, it#8, lines#18, pairs#64,
2616 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2617 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2618 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2619 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2620 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
2621 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2622 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2623 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2624 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2625 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F,
2626 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
2627 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
2628 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
2629 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
2630 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
2631 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2633 #### FreeBSD console entries
2635 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
2636 # Andrey Chernov maintains the FreeBSD termcap distributions.
2638 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
2639 # or comment out the :cb: capability in the console entry.
2641 # Alexander Lukyanov reports:
2642 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
2643 # Now el1 clears not only to the line beginning, but also a large chunk
2644 # of previous line. But there is another bug - ech does not work at all.
2648 # common entry without semigraphics
2649 # Bug: The <op> capability resets attributes.
2650 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
2651 # instance el1 does if the cursor is moved to the right margin first. Removed
2652 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
2654 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
2655 # Note that this disables standout with color.
2657 # The emulator sends difference strings based on shift- and control-keys,
2659 # F13-F24 are shifted F1-F12
2660 # F25-F36 are control F1-F12
2661 # F37-F48 are shift+control F1-F12
2662 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
2663 am, bce, bw, eo, msgr, npc,
2664 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
2665 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2666 cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
2667 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2668 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2669 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
2670 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2671 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2672 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2673 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2674 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[F,
2675 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2676 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2677 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2678 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2679 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2680 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2681 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2682 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2683 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2684 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2685 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2686 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2687 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2688 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
2690 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2691 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2692 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
2693 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
2696 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2697 kbs=^?, kdch1=\E[3~, use=cons25,
2698 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2700 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2701 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2702 smul=\E[4m, use=cons25,
2703 cons30|ansi80x30|freebsd console (30-line ansi mode),
2704 lines#30, use=cons25,
2705 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2706 lines#30, use=cons25-m,
2707 cons43|ansi80x43|freebsd console (43-line ansi mode),
2708 lines#43, use=cons25,
2709 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2710 lines#43, use=cons25-m,
2711 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2712 lines#50, use=cons25,
2713 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2714 lines#50, use=cons25-m,
2715 cons60|ansi80x60|freebsd console (60-line ansi mode),
2716 lines#60, use=cons25,
2717 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2718 lines#60, use=cons25-m,
2719 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2720 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
2721 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
2724 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2726 op@, rmul=\E[m, setab@, setaf@,
2727 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2728 %t;30;1%;%?%p6%t;1%;m,
2729 smul=\E[4m, use=cons25r,
2730 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2731 lines#50, use=cons25r,
2732 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2733 lines#50, use=cons25r-m,
2734 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2735 lines#60, use=cons25r,
2736 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2737 lines#60, use=cons25r-m,
2738 # ISO 8859-1 FreeBSD console
2739 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2740 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2741 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2742 \226v\227w\230x\231y\232z\233~\237,
2744 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2746 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2747 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2748 smul=\E[4m, use=cons25l1,
2749 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2750 lines#50, use=cons25l1,
2751 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2752 lines#50, use=cons25l1-m,
2753 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2754 lines#60, use=cons25l1,
2755 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2756 lines#60, use=cons25l1-m,
2758 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2759 # which is intended to be xterm-compatible. See for example
2760 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2761 # in particular scterm-teken.c
2763 # For FreeBSD 9 and 10:
2764 # --------------------
2765 # The /etc/ttys entries for console and other ttys are all configured to set
2768 # Testing with tack:
2769 # There is no VT100 line-drawing (uses +'s and -'s)
2770 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2772 # Testing with vttest:
2773 # Menu 2 diamonds don't work, blink ditto, light background ditto
2774 # The terminal identifies itself as VT100 with AVO
2775 # There is no VT52 support
2776 # There is no doublesize character support
2777 # The terminal supports ECH (like rxvt)
2778 # The terminal does not support send/receive mode
2779 # The terminal supports all of the ISO-6429 cursor-movement
2780 # The terminal supports some of the ISO-6429 miscellaneous tests
2781 # (SL/SR also leave unexpected char on screen too)
2783 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2784 # the cells which happen to have ASCII control-character values:
2785 # - ^X arrow pointing up
2786 # . ^Y arrow pointing down
2790 # Those are removed from this entry's acsc string to avoid confusion.
2791 # The resulting description provides correct line-drawing and function-keys -TD
2792 teken|syscons with teken,
2794 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2795 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2796 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2797 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2798 kdch1=\E[3~, kend=\E[F, kent=\r, kf1=\EOP, kf10=\E[21~,
2799 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2800 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2801 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2802 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2803 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2805 #### 386BSD and BSD/OS Consoles
2808 # This was the original 386BSD console entry (I think).
2809 # Some places it's named oldpc3|oldibmpc3.
2810 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2811 origpc3|origibmpc3|IBM PC 386BSD Console,
2812 OTbs, am, bw, eo, xon,
2814 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2816 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2817 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2818 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2819 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2820 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2821 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2823 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2824 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2827 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
2828 ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2829 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2830 knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
2832 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2833 # Note, the emulator supports many of the additional console features
2834 # listed in the iBCS2 (e.g. character-set selection) though not all
2835 # are described here. This entry really ought to be upgraded.
2836 # Also note, the console will also work with fewer lines after doing
2837 # "stty rows NN", e.g. to use 24 lines.
2838 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2839 # Bug: The <op> capability resets attributes.
2840 bsdos-pc|IBM PC BSD/OS Console,
2841 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2842 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2843 use=bsdos-pc-nobold,
2845 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2846 use=klone+color, use=bsdos-pc-m,
2848 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2849 OTbs, am, eo, km, xon,
2850 cols#80, it#8, lines#25,
2851 bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
2852 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2853 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2854 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2855 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
2856 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2857 kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
2858 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2859 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2862 # Old names for BSD/OS PC console used in releases before 4.1.
2863 pc3|BSD/OS on the PC Console,
2864 use=bsdos-pc-nobold,
2865 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2868 # BSD/OS on the SPARC
2869 bsdos-sparc|Sun SPARC BSD/OS Console,
2872 # BSD/OS on the PowerPC
2873 bsdos-ppc|PowerPC BSD/OS Console,
2878 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2880 # Actually (TD pointed this out at the time the acsc string was added):
2881 # vt52 shouldn't define full acsc since most of the cells don't match.
2882 # see vt100 manual page A-31. This is the list that does match:
2891 # The line-drawing happens to work in several terminal emulators, but should
2892 # not be used as a guide to the capabilities of the vt52. Note in particular
2893 # that vt52 does not support line-drawing characters (the scan-X values refer
2894 # to a crude plotting feature) -TD
2897 cols#80, it#8, lines#24,
2898 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=\r,
2899 cub1=\ED, cud1=\EB, cuf1=\EC,
2900 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2901 el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
2902 kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
2904 #### DEC VT100 and compatibles
2906 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2907 # and micro consoles can be found in the `obsolete' section. More details on
2908 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2909 # found near the end of this file.
2911 # Except where noted, these entries are DEC's official terminfos.
2912 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2913 # Engineering for more information. Updated terminfos and termcaps
2914 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2916 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2917 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2918 # its name to Boundless Technologies; see http://www.boundless.com.
2921 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2922 # certainly includes what DEC called the `Level 1 editing extension' codes;
2923 # only the very oldest VT100s lacked these and there probably aren't any of
2924 # those left alive. To capture these, use one of the VT102 entries.
2926 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2927 # since the cursor is left in a different position while in the
2928 # weird state (concept at beginning of next line, vt100 at end
2929 # of this line) so all versions of vi before 3.7 don't handle
2930 # <xenl> right on vt100. The correct way to handle <xenl> is when
2931 # you output the char in column 80, immediately output CR LF
2932 # and then assume you are in column 1 of the next line. If <xenl>
2933 # is on, am should be on too.
2935 # I assume you have smooth scroll off or are at a slow enough baud
2936 # rate that it doesn't matter (1200? or less). Also this assumes
2937 # that you set auto-nl to "on", if you set it off use vt100-nam
2940 # The padding requirements listed here are guesses. It is strongly
2941 # recommended that xon/xoff be enabled, as this is assumed here.
2943 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2944 # tab settings are in non-volatile memory and don't need to be
2945 # reset upon login. Also setting the number of columns glitches
2946 # the screen annoyingly. You can type "reset" to get them set.
2948 # The VT100 series terminals have cursor ("arrows") keys which can operate
2949 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2950 # is the reset state, and is assumed to be the normal state. Application
2951 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2952 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2953 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2954 # was provided primarily as an aid to the porting of VT52 applications. It is
2955 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2956 # applications such as vi will always transmit the <smkx> string. Therefore,
2957 # the definitions for the cursor keys are made to match what the terminal
2958 # transmits after the <smkx> string is transmitted. If the <smkx> string
2959 # is a null string or is not defined, then cursor keys are assumed to be in
2960 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2961 # else the application may fail. It is also expected that applications will
2962 # always transmit the <rmkx> string to the terminal before they exit.
2964 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2965 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2966 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2967 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2968 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2969 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2970 # Enter key transmits the same as the Return key (Note: the Return key
2971 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2972 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2973 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2974 # is normally in Numeric Mode. If an application requires that the keypad be
2975 # in Application Mode then it is expected that the user, or the application,
2976 # will set the TERM environment variable to point to a terminfo entry which has
2977 # defined the <smkx> string to include the codes that switch the keypad into
2978 # Application Mode, and the terminfo entry will also define function key
2979 # fields to match the Application Mode control codes. If the <smkx> string
2980 # is a null string or is not defined, then the keypad is assumed to be in
2981 # Numeric Mode. If the <smkx> string switches the keypad into Application
2982 # Mode, it is expected that the <rmkx> string will contain the control codes
2983 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2984 # applications which transmit the <smkx> string will also always transmit the
2985 # <rmkx> string to the terminal before they exit.
2987 # Here's a diagram of the VT100 keypad keys with their bindings.
2988 # The top line is the name of the key (some DEC keyboards have the keys
2989 # labelled somewhat differently, like GOLD instead of PF1, but this is
2990 # the most "official" name). The second line is the escape sequence it
2991 # generates in Application Keypad mode (where "$" means the ESC
2992 # character). The third line contains two items, first the mapping of
2993 # the key in terminfo, and then in termcap.
2994 # _______________________________________
2995 # | PF1 | PF2 | PF3 | PF4 |
2996 # | $OP | $OQ | $OR | $OS |
2997 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2999 # | $Ow | $Ox | $Oy | $Om |
3000 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
3002 # | $Ot | $Ou | $Ov | $Ol |
3003 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
3005 # | $Oq | $Or | $Os | enter |
3006 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
3009 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
3011 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
3012 # terminfo guidelines. That is a compromise used to assign the remaining
3013 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
3015 vt100+keypad|dec vt100 numeric keypad no fkeys,
3016 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
3017 vt100+pfkeys|dec vt100 numeric keypad,
3018 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3020 vt100+fnkeys|dec vt100 numeric keypad,
3021 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
3022 kf9=\EOw, use=vt100+pfkeys,
3024 # A better adaptation to modern keyboards such as the PC's, which have a dozen
3025 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
3026 # use the 5-key arrangement to model the arrow keys as suggested in the
3027 # terminfo guidelines:
3028 # _______________________________________
3029 # | PF1 | PF2 | PF3 | PF4 |
3030 # | $OP | $OQ | $OR | $OS |
3031 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
3033 # | $Ow | $Ox | $Oy | $Om |
3034 # |_ka1__K1_|_________|_ka3__K3_|_________|
3036 # | $Ot | $Ou | $Ov | $Ol |
3037 # |_________|_kb2__K2_|_________|_________|
3039 # | $Oq | $Or | $Os | enter |
3040 # |_kc1__K4_|_________|_kc3__K5_| $OM |
3043 # |___________________|_________|_kent_@8_|
3045 vt220+keypad|dec vt220 numeric keypad,
3046 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
3047 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
3050 vt100+enq|ncurses extension for vt100-style ENQ,
3051 u8=\E[?1;2c, use=ansi+enq,
3052 vt102+enq|ncurses extension for vt102-style ENQ,
3053 u8=\E[?6c, use=ansi+enq,
3055 # And here, for those of you with orphaned VT100s lacking documentation, is
3056 # a description of the soft switches invoked when you do `Set Up'.
3058 # Scroll 0-Jump Shifted 3 0-#
3059 # | 1-Smooth | 1-British pound sign
3060 # | Autorepeat 0-Off | Wrap Around 0-Off
3062 # | | Screen 0-Dark Bkg | | New Line 0-Off
3063 # | | | 1-Light Bkg | | | 1-On
3064 # | | | Cursor 0-Underline | | | Interlace 0-Off
3065 # | | | | 1-Block | | | | 1-On
3067 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
3069 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
3070 # | | | 1-On | | | 1-50 Hz
3071 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
3072 # | | 1-ANSI | | 1-8 Bits
3073 # | Keyclick 0-Off | Parity 0-Off
3075 # Margin Bell 0-Off Parity Sense 0-Odd
3078 # The following SET-UP modes are assumed for normal operation:
3079 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
3080 # WRAP_AROUND_ON JUMP_SCROLL_OFF
3081 # Other SET-UP modes may be set for operator convenience or communication
3082 # requirements; I recommend
3083 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
3084 # Unless you have a graphics add-on such as Digital Engineering's VT640
3085 # (and even then, whenever it can be arranged!) you should set
3088 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
3089 vt100|vt100-am|dec vt100 (w/advanced video),
3090 OTbs, mc5i, xenl, xon,
3092 csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
3093 kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3094 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
3095 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
3097 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3098 %;m%?%p9%t\016%e\017%;$<2>,
3099 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
3100 use=vt100+4bsd, use=vt100+fnkeys,
3101 vt100+4bsd|dec vt100 from 4.0BSD,
3103 cols#80, it#8, lines#24,
3104 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3105 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
3106 clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
3107 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
3108 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
3109 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
3110 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
3111 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3112 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
3113 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3114 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3115 %;m%?%p9%t\016%e\017%;$<2>,
3116 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
3117 smul=\E[4m$<2>, tbc=\E[3g,
3118 vt100nam|vt100-nam|vt100 no automargins,
3120 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
3121 vt100-vb|dec vt100 (w/advanced video) & no beep,
3122 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
3124 # Ordinary vt100 in 132 column ("wide") mode.
3125 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
3127 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
3128 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
3129 cols#132, lines#14, vt@,
3130 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
3132 # vt100 with no advanced video.
3133 vt100-nav|vt100 without advanced video option,
3135 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
3137 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
3138 cols#132, lines#14, use=vt100-nav,
3140 # vt100 with one of the 24 lines used as a status line.
3141 # We put the status line on the top.
3142 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
3145 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
3146 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
3147 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
3148 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
3150 # Status line at bottom.
3151 # Clearing the screen will clobber status line.
3152 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
3155 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
3156 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
3158 # Most of the `vt100' emulators out there actually emulate a vt102
3159 # This entry (or vt102-nsgr) is probably the right thing to use for
3162 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
3164 vt102-w|dec vt102 in wide mode,
3166 rs3=\E[?3h, use=vt102,
3168 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
3169 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
3170 # string in the canonical vt100 entry above leaves the screen littered
3171 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
3172 # after highlight turnoffs. This entry should fix that, and even leave
3173 # ACS support working, at the cost of making multiple-highlight changes
3174 # slightly more expensive.
3175 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
3176 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
3177 sgr@, sgr0=\E[m, use=vt102,
3179 # VT125 Graphics CRT. Clear screen also erases graphics
3180 # Some vt125's came configured with vt102 support.
3181 vt125|vt125 graphics terminal,
3183 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
3185 # This isn't a DEC entry, it came from University of Wisconsin.
3186 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
3189 cols#80, it#8, lines#24, vt#3,
3190 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
3191 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3192 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
3193 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
3194 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
3195 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
3196 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
3197 kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
3198 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
3200 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3201 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
3202 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3204 # vt132 - like vt100 but slower and has ins/del line and such.
3205 # I'm told that <smir>/<rmir> are backwards in the terminal from the
3206 # manual and from the ANSI standard, this describes the actual
3207 # terminal. I've never actually used a vt132 myself, so this
3212 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
3213 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
3215 # This vt220 description maps F5--F9 to the second block of function keys
3216 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
3217 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
3218 # PF1--PF4 are used as F1--F4.
3221 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
3222 OTbs, OTpt, am, mir, msgr, xenl, xon,
3223 cols#80, lines#24, vt#3,
3225 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3226 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3227 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
3228 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
3229 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
3230 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
3231 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
3232 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3233 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
3234 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
3235 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
3236 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
3237 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
3238 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
3239 rmso=\E[27m, rmul=\E[24m,
3240 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3241 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3242 %p9%t\E(0%e\E(B%;$<2>,
3243 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3244 smso=\E[7m, smul=\E[4m,
3246 # A much better description of the VT200/220; used to be vt220-8
3247 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
3248 # designation to accommodate bug in pcvt -TD
3250 # Here's a picture of the VT220 editing keypad:
3251 # +--------+--------+--------+
3252 # | Find | Insert | Remove |
3253 # +--------+--------+--------+
3254 # | Select | Prev | Next |
3255 # +--------+--------+--------+
3256 vt220|vt200|dec vt220,
3257 OTbs, am, mir, msgr, xenl, xon,
3258 cols#80, it#8, lines#24, vt#3,
3259 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3260 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3261 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3262 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3263 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3264 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3265 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3266 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3267 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3268 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3269 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
3270 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
3271 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3272 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3273 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3274 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
3275 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3276 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3277 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
3278 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
3280 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3281 %p9%t\E(0%e\E(B%;$<2>,
3282 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3283 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
3285 vt220-w|vt200-w|DEC vt220 in wide mode,
3287 rs3=\E[?3h, use=vt220,
3288 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
3289 OTbs, am, mc5i, mir, msgr, xenl, xon,
3290 cols#80, it#8, lines#24, vt#3,
3291 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3292 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
3293 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
3294 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
3295 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
3296 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3297 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
3298 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
3299 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
3300 il=\233%p1%dL, il1=\233L, ind=\ED,
3301 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
3302 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
3303 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
3304 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
3305 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
3306 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3307 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
3308 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
3309 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
3310 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
3311 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
3312 rmul=\23324m, rs1=\233?3l, sc=\E7,
3313 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
3314 %?%p9%t\E(0%e\E(B%;$<2>,
3315 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
3316 smso=\2337m, smul=\2334m, tbc=\2333g,
3319 # This vt220 description regards F6--F10 as the second block of function keys
3320 # at the top of the keyboard. This mapping follows the description given
3321 # in the VT220 Programmer Reference Manual and agrees with the labeling
3322 # on some terminals that emulate the vt220. There is no support for an F5.
3323 # See vt220 for an alternate mapping.
3325 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
3326 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3327 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3328 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
3329 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
3331 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
3333 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3335 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
3336 # (not an official DEC entry!)
3337 # The problem with real vt220 terminals is they don't send escapes when in
3338 # in vt220 mode. This can be gotten around two ways. 1> don't send
3339 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
3340 # features of vt100 advanced video which it then has.
3342 # This entry takes the view of putting a vt220 into vt100 mode so
3343 # you can use the escape key in emacs and everything else which needs it.
3345 # You probably don't want to use this on a VMS machine since VMS will think
3346 # it has a vt220 and will get fouled up coming out of emacs
3348 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
3349 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
3351 vt200-js|vt220-js|dec vt200 series with jump scroll,
3354 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3355 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3356 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
3357 ht=^I, il1=\E[L, ind=\ED,
3358 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
3360 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3361 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
3362 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
3363 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
3364 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
3365 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
3367 # This was DEC's vt320. Use the purpose-built one below instead
3368 #vt320|DEC VT320 in vt100 emulation mode,
3371 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
3373 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
3375 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3377 # These entries are not DEC's official ones, they were purpose-built for the
3378 # VT320. Here are the designer's notes:
3379 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
3380 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
3381 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
3382 # Things that use <knxt> usually use tab anyways... and things that don't use
3383 # tab usually use <knxt> instead...
3384 # kprv is same as tab - Backtab is useless...
3385 # I left out <sgr> because of its RIDICULOUS complexity,
3386 # and the resulting fact that it causes the termcap translation of the entry
3387 # to SMASH the 1k-barrier...
3388 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3389 # (vt320: uncommented <fsl> --esr)
3390 vt320|vt300|dec vt320 7 bit terminal,
3391 am, hs, mir, msgr, xenl,
3392 cols#80, lines#24, wsl#80,
3393 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3394 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3395 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
3396 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3397 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3398 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3399 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3400 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
3401 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
3402 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3403 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3404 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
3405 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3406 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3407 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3408 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
3409 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
3410 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3411 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3413 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3415 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3416 %p9%t\E(0%e\E(B%;$<2>,
3417 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3418 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3419 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
3420 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
3422 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3423 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
3424 # We have to init 132-col mode, not 80-col mode.
3425 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
3427 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3428 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
3429 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
3431 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3432 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
3434 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
3435 # which are pretty much a superset of the VT320. They have the
3436 # host writable status line, yet another different DRCS matrix size,
3437 # and such, but they add the DEC Technical character set, Multiple text
3438 # pages, selectable length pages, and the like. The difference between
3439 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
3440 # monitor, the former has 4 planes and a color monitor. These terminals
3441 # support VT131 and ANSI block mode, but as with much of these things,
3442 # termcap/terminfo doesn't deal with these features.
3444 # Note that this entry is are set up in what was the standard way for GNU
3445 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3446 # keys were switched into application mode at the same time the numeric pad
3447 # is switched into application mode. This changes the definitions of the
3448 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3449 # your termcap or terminfo entry,
3451 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3452 # (vt340: string capability "sb=\E[M" corrected to "sr";
3453 # also, added <rmam>/<smam> based on the init string -- esr)
3454 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
3455 am, eslok, hs, mir, msgr, xenl, xon,
3456 cols#80, it#8, lines#24, vt#3,
3457 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3458 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3459 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3460 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
3461 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3462 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
3463 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
3464 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3465 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
3467 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3469 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3470 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3471 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3472 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
3473 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3474 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3475 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
3476 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3477 %p9%t\E(0%e\E(B%;$<2>,
3478 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3479 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3480 tsl=\E[2$~\E[1$}\E[1;%dH,
3482 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
3483 # (originally written with vt420 as its primary name, and usable for it).
3485 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
3486 # text pages and long text pages with selectable length of the vt340, along
3487 # with left and right margins, rectangular area text copy, fill, and erase
3488 # operations, selected region character attribute change operations,
3489 # page memory and rectangle checksums, insert/delete column, reception
3490 # macros, and other features too numerous to remember right now. TERMCAP
3491 # can only take advantage of a few of these added features.
3493 # Note that this entry is are set up in what was the standard way for GNU
3494 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3495 # keys were switched into application mode at the same time the numeric pad
3496 # is switched into application mode. This changes the definitions of the
3497 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3498 # your termcap entry,
3500 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3501 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
3502 # also, added <rmam>/<smam> based on the init string -- esr)
3503 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
3504 am, eslok, hs, mir, msgr, xenl, xon,
3505 cols#80, it#8, lines#24, vt#3,
3506 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3507 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3508 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=\r,
3509 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3510 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3511 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3512 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3513 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
3514 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3515 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3516 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3517 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
3519 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3520 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3521 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3522 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
3523 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3524 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3525 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
3526 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3527 %p9%t\E(0%e\E(B%;$<2>,
3528 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3529 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3530 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
3532 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
3533 # a missing <sc> -- esr)
3534 # add msgr and other capabilities from vt220 -TD
3536 am, mir, msgr, xenl, xon,
3537 cols#80, it#8, lines#24, vt#3,
3538 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3539 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3540 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
3541 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3542 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3543 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
3544 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3545 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
3546 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
3547 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3548 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3549 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3550 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
3551 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
3552 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
3553 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
3554 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
3555 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3556 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3557 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3558 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
3559 %p9%t\E(0%e\E(B%;$<2>,
3560 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3561 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3562 use=ansi+pp, use=dec+sl, use=ansi+enq,
3564 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3565 # takes two parameters, the key and the string. Translating the key is
3566 # straightforward (keys 1-5 are not defined on real terminals, though some
3567 # emulators define these):
3569 # if (key < 16) then value = key;
3570 # else if (key < 21) then value = key + 1;
3571 # else if (key < 25) then value = key + 2;
3572 # else if (key < 27) then value = key + 3;
3573 # else if (key < 30) then value = key + 4;
3574 # else value = key + 5;
3576 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3577 # There's no provision in terminfo for emitting a string in this format, so the
3578 # application has to know it.
3580 vt420pc|DEC VT420 w/PC keyboard,
3581 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3582 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
3583 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
3584 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
3585 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
3586 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
3587 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
3588 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
3589 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
3590 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
3591 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
3592 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
3593 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3594 pctrm=USR_TERM\:vt420pcdos\:,
3595 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
3596 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
3600 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3602 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
3603 %{127}%=%t\E\177%e%p1%c%;,
3605 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3606 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3608 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3609 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3610 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3611 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3612 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3613 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3614 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3619 vt510pc|DEC VT510 w/PC keyboard,
3621 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3626 # The VT520 is a monochrome text terminal capable of managing up to
3627 # four independent sessions in the terminal. It has multiple ANSI
3628 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3629 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3630 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3632 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3633 # [Alt]/[Print Screen] depending upon which keyboard and which
3634 # terminal mode is being used. If Set-Up has been disabled or
3635 # assigned to an unknown key, Set-Up may be entered by pressing
3636 # [F3] as the first key after power up, regardless of keyboard type.
3638 use=ansi+rca, use=vt420, use=ansi+tabs,
3643 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3644 # Keyboard, which replaces the old LK41R-AA keyboard.
3646 # In trying to get the function keys to work, I had to cobble my own
3647 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3648 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3649 # I seem to get them all -Mike Gran
3650 vt520ansi|Boundless VT520 ANSI,
3651 use=ansi+rca, use=vt420f, use=vt220+keypad,
3654 #### VT100 emulations
3657 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3658 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3659 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3660 # that this works best with a stock vt100 entry.
3661 dec-vt100|EWAN telnet's vt100 emulation,
3664 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3665 dec-vt220|DOS tnvt200 terminal emulator,
3668 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3669 # anyone who needs PC VT340 emulation. (or anything below that level, for
3670 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3671 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
3672 # I can send the address if requested.
3673 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3674 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3675 z340|zstem vt340 terminal emulator 132col 42line,
3677 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3678 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
3679 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
3681 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3682 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
3684 # CRT is shareware. It implements some xterm features, including mouse.
3685 crt|crt-vt220|CRT 2.3 emulating VT220,
3688 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3690 # PuTTY 0.55 (released 3 August 2004)
3691 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3693 # Comparing with 0.51, vttest is much better (only a few problems with the
3694 # cursor position reports and wrapping).
3696 # PuTTY 0.51 (released 14 December 2000)
3698 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3699 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3700 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3701 # to xterm, which is incorrect, since several features are misimplemented:
3703 # Alt+key always sends ESC+key, so 'km' capability is removed.
3705 # Control responses, wrapping and tabs are buggy, failing a couple of
3706 # screens in vttest.
3708 # xterm mouse support is not implemented (unrelease version may).
3710 # Several features such as backspace/delete are optional; this entry documents
3711 # the default behavior -TD
3713 putty|PuTTY terminal emulator,
3714 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3715 colors#8, it#8, ncv#22, pairs#64, U8#1,
3716 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3717 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3718 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
3719 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3720 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3721 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3722 dch=\E[%p1%dP, dch1=\E[P,
3723 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
3724 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
3725 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
3726 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
3727 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
3728 %%G\340\202\242\E%%@%e%p1%c%;,
3729 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3730 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
3731 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL,
3732 il1=\E[L, ind=\n, indn=\E[%p1%dS,
3733 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
3734 %02x%p4%{255}%*%{1000}%/%02x,
3735 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3736 kLFT=\E[D, kRIT=\E[C, kb2=\E[G, kbs=^?, kcbt=\E[Z,
3737 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3738 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
3739 kind=\E[B, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[A,
3740 kspd=^Z, nel=\r\n, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
3741 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
3742 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmkx=\E[?1l\E>,
3743 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
3744 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3745 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3746 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3747 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3748 %;m%?%p9%t\016%e\017%;,
3749 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3750 smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
3751 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J,
3752 use=putty+fnkeys, use=vt102+enq, use=xterm+sl,
3753 vt100-putty|Reset PuTTY to pure vt100,
3754 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3756 putty-256color|PuTTY 0.58 with xterm 256-colors,
3757 use=xterm+256setaf, use=putty,
3758 putty-noapp|putty with cursor keys in normal mode,
3759 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3760 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
3763 # One of the keyboard selections is "VT100+".
3764 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3765 putty-vt100|VT100+ keyboard layout,
3766 use=putty+fnkeys+vt100, use=putty,
3768 putty-sco|putty with SCO function keys,
3769 use=putty+fnkeys+sco, use=putty,
3771 # PuTTY has more than one section in its Keyboard configuration:
3772 # a) backspace/delete, which we ignore since that choice largely depends on
3773 # whether one matches Unix and BSD or Linux.
3774 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
3775 # are unrelated to rxvt's actual settings.
3776 # c) function keys and keypad - this is the interesting part. None of the
3777 # selections match any of their respective namesakes, but they are shown
3778 # here to help users who expect that the selections do what is implied.
3780 # This is the default setting for PuTTY
3781 putty+fnkeys|fn-keys for PuTTY,
3782 use=putty+fnkeys+esc,
3784 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
3785 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3786 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3787 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3788 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3789 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3791 putty+fnkeys+linux|Linux fn-keys for PuTTY,
3792 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3793 use=putty+fnkeys+esc,
3795 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
3796 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3797 use=putty+fnkeys+esc,
3799 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
3800 use=putty+fnkeys+esc,
3802 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
3804 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
3805 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3806 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3807 kf9=\EOX, use=putty+fnkeys+esc,
3809 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3811 # Use modifiers to obtain function keys past 12:
3814 # F25-F36 - control/alt
3815 # F37-F48 - control/shift
3817 putty+fnkeys+sco|SCO fn-keys for PuTTY,
3818 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3819 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3820 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3821 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3822 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3823 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3824 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3825 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3826 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3827 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3828 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3829 kich1=\E[L, knp=\E[G, kpp=\E[I,
3831 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3832 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3833 # (communication program) which supports:
3835 # - Serial port connections.
3836 # - TCP/IP (telnet) connections.
3837 # - VT100 emulation, and selected VT200/300 emulation.
3838 # - TEK4010 emulation.
3839 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3841 # - Scripts using the "Tera Term Language".
3842 # - Japanese and Russian character sets.
3844 # The program does not come with terminfo or termcap entries. However, the
3845 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3846 # vt52 or doublesize character support; blinking is done with color). Besides
3847 # the HPA, VPA extensions it also implements CPL and CNL.
3849 # All of the function keys can be remapped. This description shows the default
3850 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3851 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3852 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3860 # ANSI colors are implemented, but cannot be combined with video attributes
3861 # except for reverse.
3863 # No fonts are supplied with the program, so the acsc string is chosen to
3864 # correspond with the default Microsoft terminal font.
3866 # Tera Term recognizes some xterm sequences, including those for setting and
3867 # retrieving the window title, and for setting the window size (i.e., using
3868 # "resize -s"), though it does not pass SIGWINCH to the application if the
3869 # user resizes the window with the mouse.
3870 teraterm2.3|Tera Term Pro,
3873 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
3874 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
3875 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3876 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3877 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3878 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3879 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3880 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3881 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3882 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3883 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3884 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3885 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3886 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3887 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3888 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3889 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3890 use=klone+color, use=vt100,
3892 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3893 # to choose a Windows OEM font).
3895 # Testing with tack:
3896 # - it does not have xenl (suppress that)
3897 # - underline seems to work with color (modify ncv).
3898 # Testing with vttest:
3899 # - wrapping differs from vt100 (menu 1).
3900 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
3902 # - it recognizes the dtterm window controls for reporting size in
3903 # characters and pixels.
3904 # - it passes SIGWINCH.
3905 teraterm4.59|Tera Term Pro,
3908 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3909 kmous=\E[M, use=teraterm2.3,
3914 # Tested with WinNT 4.0, the telnet application assumes the screensize is
3915 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
3918 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3919 # for casual (occasional) use. Also fails several of the vttest screens,
3920 # but that is not unusual for vt100 "emulators".
3921 # b) Does not implement vt100 keypad
3922 # c) Recognizes a subset of vt52 controls.
3923 ms-vt100|MS telnet imitating dec vt100,
3925 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
3926 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
3927 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3928 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3929 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3931 # Tested with Windows 2000, the telnet application runs in a console window,
3932 # also using 'Terminal' font.
3935 # a) This version has no function keys or numeric keypad. Unlike the older
3936 # version, the numeric keypad is entirely ignored.
3937 # b) The program sets $TERM to "ansi", which of course is inaccurate.
3938 ms-vt100-color|vtnt|windows 2000 ansi (sic),
3940 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3943 # Based on comments from Federico Bianchi:
3945 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3946 # scheme for PF keys.
3948 # and PuTTY wishlist:
3950 # The modifiers are represented as the codes listed above, prefixed to
3951 # the normal sequences. If the modifier is pressed alone, its sequence
3952 # is transmitted twice in succession. If multiple modifiers apply,
3953 # they're transmitted in the order shift, control, alt.
3958 ms-vt100+|vt100+|windows XP vt100+ (sic),
3959 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3960 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3961 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3962 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3963 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3964 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3965 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3966 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3967 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3968 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3969 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3970 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3971 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3972 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3973 knp=\E/, kpp=\E?, use=ms-vt100-color,
3975 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3978 # expect-5.44.1.15/example/tkterm
3979 # a minimal subset of a vt100 (compare with "news-unk).
3981 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3982 tt|tkterm|Don Libes' tk text widget terminal emulator,
3983 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
3984 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
3985 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3986 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3989 ######## X TERMINAL EMULATORS
3992 # You can add the following line to your .Xdefaults to change the terminal type
3993 # set by the xterms you start up to my-xterm:
3995 # *termName: my-xterm
3997 # System administrators can change the default entry for xterm instances
3998 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
3999 # case, xterm will detect and reject an invalid terminal type, falling back
4000 # to the default of xterm.
4003 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
4004 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
4005 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
4006 # as these seem not to work -- esr)
4007 x10term|vs100-x10|xterm terminal emulator (X10 window system),
4008 OTbs, am, km, mir, msgr, xenl, xon,
4009 cols#80, it#8, lines#65,
4010 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
4011 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4012 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4013 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
4014 il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
4015 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
4016 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
4017 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4018 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
4019 smso=\E[7m, smul=\E[4m,
4020 # Compatible with the R5 xterm
4021 # (from the XFree86 3.2 distribution, <blink=@> removed)
4022 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
4023 # corrected typos in rs2 string - TD
4025 xterm-r5|xterm R5 version,
4026 OTbs, am, km, msgr, xenl,
4027 cols#80, it#8, lines#24,
4028 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4029 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4030 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4031 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4032 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4033 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4034 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
4035 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
4036 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
4037 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
4038 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4039 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
4040 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
4041 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
4043 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
4045 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
4047 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
4048 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
4049 # Compatible with the R6 xterm
4050 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
4051 # added khome/kend, hts based on the R6 xterm code - TD
4052 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
4053 # for compatibility with other emulators).
4054 xterm-r6|xterm X11R6 version,
4055 OTbs, am, km, mir, msgr, xenl,
4056 cols#80, it#8, lines#24,
4057 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4058 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4059 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4060 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4061 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4062 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4063 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
4065 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
4066 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4067 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
4068 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
4069 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
4070 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
4071 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4072 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4073 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
4074 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
4075 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
4076 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
4077 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
4078 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4080 xterm-old|antique xterm version,
4082 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
4083 # The name has been changed and some aliases have been removed.
4084 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
4085 OTbs, am, bce, km, mir, msgr, xenl, XT,
4086 cols#80, it#8, lines#24, ncv@,
4087 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4088 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4089 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
4090 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4091 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4092 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4093 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
4094 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
4095 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
4096 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
4098 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
4099 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4100 kcuu1=\EOA, kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
4101 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
4102 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
4103 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
4104 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
4105 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
4106 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
4107 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
4108 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
4109 rmso=\E[27m, rmul=\E[24m, rs1=^O,
4110 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
4111 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4113 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4115 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4116 %;m%?%p9%t\016%e\017%;,
4117 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
4118 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
4119 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
4120 use=ecma+color, use=vt220+keypad,
4122 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
4123 # codes for F1-F4 except while in VT220 mode.
4124 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
4125 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
4127 # This version was released in XFree86 3.3.3 (November 1998).
4128 # Besides providing printer support, it exploits a new feature that allows
4129 # xterm to use terminfo-based descriptions with the titeInhibit resource.
4130 # -- the distribution contained incorrect khome/kend values -TD
4131 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
4132 blink=\E[5m, ich1@, invis=\E[8m,
4133 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
4134 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
4135 rs2=\E[!p\E[?3;4l\E[4l\E>,
4136 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4137 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
4138 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
4141 # This version was released in XFree86 4.0.
4142 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
4144 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
4145 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
4146 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
4147 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4148 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
4149 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4150 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4151 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
4152 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
4153 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
4154 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
4155 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
4156 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
4157 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
4158 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
4160 smcup=\E[?1049h, use=xterm-xf86-v333,
4162 # This version was released in XFree86 4.3.
4163 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
4164 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4165 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
4167 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4168 %p7%t;8%;m%?%p9%t\016%e\017%;,
4171 # This version was released in XFree86 4.4.
4172 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
4173 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
4174 rin=\E[%p1%dT, use=xterm-xf86-v43,
4176 xterm-xfree86|xterm terminal emulator (XFree86),
4179 # This version reflects the current xterm features.
4180 xterm-new|modern xterm terminal emulator,
4182 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
4183 rin=\E[%p1%dT, use=ansi+enq, use=xterm+pcfkeys,
4184 use=xterm+tmux, use=ecma+strikeout, use=xterm-basic,
4186 # This fragment is for people who cannot agree on what the backspace key
4188 xterm+kbs|fragment for backspace key,
4191 # This fragment describes as much of XFree86 xterm's "pc-style" function
4192 # keys as will fit into terminfo's 60 function keys.
4195 # ---------------------------------
4202 # 8 Shift + Alt + Control
4203 # ---------------------------------
4204 # The meta key may also be used as a modifier in this scheme, adding another
4205 # bit to the parameter.
4206 xterm+pcfkeys|fragment for PC-style fkeys,
4207 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
4210 xterm+noapp|fragment with cursor keys in normal mode,
4211 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
4214 xterm+app|fragment with cursor keys in application mode,
4215 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
4218 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
4219 # and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
4220 # copied the earlier scheme, as noted in the "use=" clauses in this file.
4222 # The original assignments from patch #94 for cursor-keys had some technical
4225 # A parameter for a function-key to represent a modifier is just more
4226 # bits. But for a cursor-key it may change the behavior of the
4227 # application. For instance, emacs decodes the first parameter of a
4228 # cursor-key as a repeat count.
4230 # A parameterized string should (really) not begin with SS3 (\EO).
4231 # Rather, CSI (\E[) should be used.
4233 # For these reasons, the original assignments were deprecated. For
4234 # compatibility reasons, they are still available as a setting of xterm's
4235 # modifyCursorKeys resource. These fragments list the modified cursor-keys
4236 # that might apply to xterm+pcfkeys with different values of that resource.
4237 xterm+pcc3|fragment with modifyCursorKeys:3,
4238 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
4239 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
4240 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
4241 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
4242 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
4243 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
4244 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
4245 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
4248 xterm+pcc2|fragment with modifyCursorKeys:2,
4249 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
4250 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
4251 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
4252 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
4253 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
4254 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
4255 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
4257 xterm+pcc1|fragment with modifyCursorKeys:1,
4258 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
4259 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
4260 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
4261 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
4262 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
4263 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
4265 xterm+pcc0|fragment with modifyCursorKeys:0,
4266 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
4267 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
4268 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
4269 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
4270 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
4271 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4274 # Here are corresponding fragments from xterm patch #216:
4276 xterm+pcf0|fragment with modifyFunctionKeys:0,
4277 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4278 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4279 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4280 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4281 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4282 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4283 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4284 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4285 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4286 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4287 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4288 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4289 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4290 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4291 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4292 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4293 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4295 xterm+pcf2|fragment with modifyFunctionKeys:2,
4296 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4297 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4298 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4299 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4300 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4301 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4302 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4303 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4304 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4305 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4306 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4307 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4308 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4309 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4310 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4311 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4312 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4313 kf8=\E[19~, kf9=\E[20~,
4315 # Chunks from xterm #230:
4316 xterm+pce2|fragment with modifyCursorKeys:2,
4317 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4318 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4319 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4320 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4321 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4322 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4323 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4324 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4325 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4326 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4327 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4330 xterm+edit|fragment for 6-key editing-keypad,
4331 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4334 xterm+pc+edit|fragment for pc-style editing keypad,
4335 kend=\E[4~, khome=\E[1~,
4337 xterm+vt+edit|fragment for vt220-style editing keypad,
4338 kfnd=\E[1~, kslt=\E[4~,
4341 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
4342 # Alternatively, the same scheme with old-style function keys as in xterm-r6
4343 # is shown here (because that is used in mrxvt and mlterm):
4344 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
4345 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
4346 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
4347 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
4348 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
4349 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
4350 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
4351 kf63=\E[13;4~, use=xterm+pcf2,
4353 # This chunk is used for building the VT220/Sun/PC keyboard variants.
4354 xterm-basic|modern xterm terminal emulator - common,
4355 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
4356 colors#8, cols#80, it#8, lines#24, pairs#64,
4357 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4358 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4359 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
4360 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4361 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4362 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4363 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
4364 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4365 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
4366 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4367 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
4368 is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
4369 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4370 ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4371 rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m,
4372 rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
4373 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4374 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4376 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4378 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
4379 %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
4380 sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
4381 smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
4382 smm=\E[?1034h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4383 vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+pp, use=xterm+kbs,
4386 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
4387 # In retrospect, something like xterm-r6 was intended here -TD
4388 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
4389 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
4391 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
4394 # If configured to support 88- or 256-colors (which is fairly common in 2009),
4395 # xterm also recognizes the control sequences for initc -TD
4396 xterm-16color|xterm with 16 colors like aixterm,
4398 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4399 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4400 oc=\E]104\007, rs1=\Ec\E]104\007, use=ibm+16color,
4403 # 256-colors is a compile-time feature of XFree86 xterm beginning with
4404 # xterm patch #111 (1999/7/10) -TD
4405 xterm+256color|xterm 256-color feature,
4407 colors#0x100, pairs#0x7fff,
4408 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
4409 %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
4411 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4413 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4417 # palette is hardcoded...
4418 xterm+256setaf|xterm 256-color (set-only),
4420 colors#0x100, pairs#0x7fff,
4422 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
4424 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
4428 # 88-colors is a compile-time feature of XFree86 xterm beginning with
4429 # xterm patch #115 (1999/9/18) -TD
4431 # Note that the escape sequences used are the same as for 256-colors - xterm
4432 # has a different table of default color resource values. If built for
4433 # 256-colors, it can still handle an 88-color palette by using the initc
4436 # At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
4437 # which support the xterm+256color feature support the associated initc
4438 # capability. So it is cancelled in the entries which use this and/or the
4439 # xterm+256color block.
4441 # The default color palette for the 256- and 88-colors are different. A
4442 # given executable will have one palette (perhaps compiled-in). If the program
4443 # supports xterm's control sequence, it can be programmed using initc.
4444 xterm+88color|xterm 88-color feature,
4445 colors#88, pairs#7744, use=xterm+256color,
4447 # These variants of XFree86 3.9.16 xterm are built as a configure option.
4448 xterm-256color|xterm with 256 colors,
4449 rs1=\Ec\E]104\007, use=xterm+256color, use=xterm-new,
4450 xterm-88color|xterm with 88 colors,
4451 rs1=\Ec\E]104\007, use=xterm+88color,
4454 # This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
4455 # asked for some of xterm's advanced features to be added to its terminfo
4456 # entry. It defines extended capabilities not found in standard terminfo or
4457 # termcap. These are useful in tmux, for instance, hence the name.
4459 # One caveat in adding extended capabilities in ncurses is that if the names
4460 # are longer than two characters, then they will not be visible through the
4461 # termcap interface.
4463 # Ms modifies the selection/clipboard. Its parameters are
4464 # p1 = the storage unit (clipboard, selection or cut buffer)
4465 # p2 = the base64-encoded clipboard content.
4467 # Ss is used to set the cursor style as described by the DECSCUSR
4468 # function to a block or underline.
4469 # Se resets the cursor style to the terminal power-on default.
4471 # Cs and Cr set and reset the cursor colour.
4472 xterm+tmux|advanced xterm features used in tmux,
4473 Cr=\E]112\007, Cs=\E]12;%p1%s\007,
4474 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
4476 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
4477 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
4478 # To use it, your decTerminalID resource must be set to 200 or above.
4485 xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
4486 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
4487 colors#8, cols#80, it#8, lines#24, pairs#64,
4488 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4489 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
4490 civis=\233?25l, clear=\233H\2332J,
4491 cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr,
4492 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n,
4493 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
4494 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
4495 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
4496 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
4497 flash=\233?5h$<100/>\233?5l, home=\233H,
4498 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
4499 il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m,
4500 is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4502 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
4503 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
4504 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
4505 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
4506 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
4507 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
4508 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
4509 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
4510 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
4511 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
4512 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
4513 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
4514 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
4516 rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
4518 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
4519 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4520 %{6}%=%t3%e%p1%d%;m,
4521 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
4522 %{6}%=%t3%e%p1%d%;m,
4523 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
4524 %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
4525 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
4526 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
4527 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
4528 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
4531 xterm-hp|xterm with hpterm function keys,
4532 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
4533 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
4534 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
4535 knp=\ES, kpp=\ET, use=xterm-basic,
4537 xterm-sco|xterm with SCO function keys,
4538 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
4539 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
4540 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
4541 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
4542 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
4543 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
4544 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
4545 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
4546 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
4547 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
4548 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
4549 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
4552 # The xterm-new description has all of the features, but is not completely
4553 # compatible with vt220. If you are using a Sun or PC keyboard, set the
4554 # sunKeyboard resource to true:
4555 # + maps the editing keypad
4556 # + interprets control-function-key as a second array of keys, so a
4557 # 12-fkey keyboard can support vt220's 20-fkeys.
4558 # + maps numeric keypad "+" to ",".
4559 # + uses DEC-style control sequences for the application keypad.
4561 xterm-vt220|xterm emulating vt220,
4562 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
4563 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4564 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
4565 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
4566 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4567 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
4568 use=xterm+app, use=xterm+edit, use=xterm-basic,
4571 xterm-vt52|xterm emulating dec vt52,
4572 cols#80, it#8, lines#24,
4573 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4574 bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
4575 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
4576 home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4577 kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
4580 xterm-noapp|xterm with cursor keys in normal mode,
4581 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
4584 xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
4585 lines#24, use=xterm-old,
4587 # This is xterm for ncurses.
4588 xterm|xterm terminal emulator (X Window System),
4591 # This entry assumes that xterm's handling of VT100 SI/SO is disabled by
4592 # setting the vt100Graphics resource to false.
4593 xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
4596 # These building-blocks allow access to the X titlebar and icon name as a
4597 # status line. There are a few problems in using them in entries:
4599 # a) tsl should have a parameter to denote the column on which to transfer to
4601 # b) the "0" code for xterm updates both icon-title and window title. Some
4602 # window managers such as twm (and possibly window managers descended from
4603 # it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
4604 # don't want to mess with icon-name when using those window managers.
4606 # The extension "TS" is preferable, because it does not accept a parameter.
4607 # However, if you are using a non-extended terminfo, "TS" is not visible.
4608 xterm+sl|access X title line and icon name,
4610 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
4611 xterm+sl-twm|access X title line (pacify twm-descended window managers),
4613 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
4615 # In contrast, this block can be used for a DEC vt320 and up. There are two
4618 # DECSASD (select active status display)
4619 # \E[0$} Main display
4620 # \E[1$} Status line
4622 # DECSSDT (select status line type)
4623 # \E[0$~ No status line
4624 # \E[1$~ Indicator status line
4625 # \E[2$~ Host-writable status line
4627 # The building block assumes that the terminal always shows something at the
4628 # status line (either the indicator, or status line). That is because if no
4629 # status line is used, then the terminal makes that line part of the user
4630 # window, changing its size without notice.
4632 # Because there is no "esl" (enable status line) capability, the "tsl"
4633 # capability ensures that the status line is host-writable. A DEC terminal
4634 # will clear the status line when changing from indicator to host-writable
4637 # Once on the status line, the row part of cursor addressing is ignored. Since
4638 # tsl expects a parameter (to specify the column), the shortest addressing that
4639 # can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
4641 dec+sl|DEC VTxx status line,
4643 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
4646 # The following xterm variants don't depend on your base version
4648 # xterm with bold instead of underline
4649 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
4650 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
4652 smso=\E[7m, smul=\E[1m, use=xterm-old,
4654 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
4655 xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
4656 ich@, ich1@, use=xterm,
4657 # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
4658 xterm1|xterm terminal emulator ignoring the alternate screen buffer,
4659 rmcup@, smcup@, use=xterm,
4662 # The xterm mouse protocol is used by other terminal emulators.
4663 # In this section, two extended capabilities are used to illustrate the mouse
4664 # protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
4665 # enabling/disabling other mouse protocols. The "xm" capability describes the
4666 # mouse response; currently there is no interpreter which would use this
4667 # information to make the mouse support completely data-driven.
4669 # Here is the "original" xterm mouse protocol.
4671 # First seen in X10.3, February 1986, this likely dates from 1985 based on the
4672 # copyright dates in the sources. A comment in charproc.c notes "MIT bogus
4673 # sequence", referring to the fact that it does not correspond to a "real"
4674 # terminal. The mouse responses for the X10 protocol are sent only for
4676 xterm+x10mouse|X10 xterm mouse protocol,
4677 kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
4678 xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
4679 xterm-x10mouse|X10 xterm mouse,
4680 use=xterm+x10mouse, use=xterm,
4682 # Here is the conventional xterm mouse protocol, introduced with X11R1 in
4685 # The mouse responses for the X11 protocol covered button releases, as well as
4688 # alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
4691 # The modifiers are not reflected in this description because as used in xterm
4692 # they are normally inaccessible because the translations resources assign
4693 # shift and control to other features. However, they are important because
4694 # they take up space in the first byte of the response. The other bits of this
4695 # byte are used to encode the button number for both presses and releases.
4696 # In the X11 protocol, any button-release is encoded with "3" (the lowest 2
4697 # bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
4698 # provide additional features, e.g., wheel mouse.
4700 # X11R1's xterm also supported an "emacs" mouse protocol, with final character
4701 # "t" or "T", which was activated by double-clicking. The "t" response was
4702 # used when the starting/ending positions were the same.
4704 # X11R3 (February 1988) added the highlight/tracking mode.
4706 # X11R4 (December 1989) added the control sequences document, listing the
4707 # control sequences for the X10/X11 protocols without descriptions. It also
4708 # mentioned the "emacs" ("T") response. Comments in button.c referred to the
4709 # X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal.
4711 # X11R5 (November 1993) gave a description of the mouse protocol.
4713 # X11R6 (January 1995) moved the control sequences document out of the xterm
4714 # source-directory to xc/doc/specs/xterm, polishing the formatting but adding
4715 # no new information.
4716 xterm+x11mouse|X11 xterm mouse protocol,
4717 kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
4718 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%c%p1%'!'%+%c,
4719 xterm-x11mouse|X11 mouse,
4720 use=xterm+x11mouse, use=xterm,
4722 # Here is a suggested description of the xterm highlighting protocol.
4723 # A more complicated example could be constructed to account for the "t"
4725 xterm+x11hilite|X11 xterm mouse protocol with highlight,
4726 kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
4727 xm=\E[%p7%'!'%+%p6%'!'%+%c%p9%'!'%+%c%p8%'!'%+%c%p2%'!'%+%c
4729 xterm-x11hilite|X11 mouse with highlight,
4730 use=xterm+x11mouse, use=xterm,
4732 # The preceding were the sources from X Consortium. Other sources (or patches)
4733 # were available. Starting in mid-1995, XFree86 developers collected some of
4734 # those changes and began improvements, e.g., to support color. This was, by
4735 # the way, around the same time that rxvt developers began implementing color,
4736 # though dates (and attributions) are not well documented. I became interested
4737 # in xterm in late 1995, and involved in early 1996. To complete the picture,
4738 # CDE's dtterm was introduced around the same time, with no mouse protocol -TD
4740 # xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
4741 # "any-event" mouse mode.
4742 xterm+sm+1002|xterm any-event mouse,
4743 kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
4744 xterm-1002|xterm any-event mouse,
4745 use=xterm+sm+1002, use=xterm,
4747 xterm+sm+1003|testing xterm-mouse,
4748 kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
4750 xterm-1003|testing xterm-mouse,
4751 use=xterm+sm+1003, use=xterm,
4753 # xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
4756 # xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
4757 # dropping support for the X11 mouse protocol's shift-modifier and using
4758 # available bits in the first byte of the response to encode buttons 4 and 5.
4759 # xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
4760 # older configurations which might have used the obsolete modifiers.
4762 # xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
4763 # where the coordinates in the mouse response would be encoded in UTF-8,
4764 # thereby extending the range of coordinates past 222=(255-33). This is the
4765 # "1005" mouse mode.
4766 xterm+sm+1005|xterm UTF-8 mouse,
4767 kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
4768 xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
4769 xterm-1005|xterm UTF-8 mouse,
4770 use=xterm+sm+1005, use=xterm,
4772 # xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
4773 # SGR-style parameters.
4775 # Someone stated that the 1005 mouse mode would not be handled properly in luit.
4776 # (By the way, this is a problem with the X11 protocol). A more plausible
4777 # criticism is that the responses provided by the 1005 mode are not distinct
4778 # from the non-1005 responses.
4780 # As an alternative (and fixing the longstanding limitation of X11 mouse
4781 # protocol regarding button-releases), I provided this:
4782 xterm+sm+1006|xterm SGR-mouse,
4783 kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
4784 xm=\E[<%p1%d;%p2%d;%p3%d;%?%p4%tM%em%;,
4785 xterm-1006|xterm SGR-mouse,
4786 use=xterm+sm+1006, use=xterm,
4789 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
4790 # (kterm should not invoke DEC Graphics as the alternate character set
4791 # -- Kenji Rikitake)
4792 # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
4793 # -- MATSUMOTO Shoji)
4794 # kterm implements acsc via built-in table of X Drawable's
4795 kterm|kterm kanji terminal emulator (X window system),
4798 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
4799 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
4800 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
4801 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
4803 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
4804 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
4805 kterm-color|kterm-co|kterm with ANSI colors,
4806 ncv@, use=kterm, use=ecma+color,
4809 # These (xtermc and xtermm) are distributed with Solaris. They refer to a
4810 # variant of xterm which is apparently no longer supported, but are interesting
4811 # because they illustrate SVr4 curses mouse controls - T.Dickey
4812 xtermm|xterm terminal emulator (monocrome),
4813 OTbs, am, km, mir, msgr, xenl,
4814 btns#3, cols#80, it#8, lines#24,
4815 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4816 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4817 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
4818 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4819 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4820 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4821 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
4822 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
4823 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
4824 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
4825 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
4826 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
4827 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
4828 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
4829 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
4830 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4831 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4832 %;m%?%p9%t\016%e\017%;,
4833 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
4834 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
4836 xtermc|xterm terminal emulator (color),
4837 colors#8, ncv#7, pairs#64,
4838 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4839 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4841 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
4845 # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
4846 # Here's a termcap entry I've been using for xterm_color, which comes
4847 # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
4848 # color stuff, I also have a status line defined as the window manager
4849 # title bar. [I have translated it to terminfo -- ESR]
4850 xterm-pcolor|xterm with color used for highlights and status line,
4852 bold=\E[1;43m, rev=\E[7;34m,
4853 sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
4854 %t;7;31%;%?%p3%t;7;34%;m,
4855 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
4857 # This describes the capabilities of color_xterm, an xterm variant from
4858 # before ECMA-64 color support was folded into the main-line xterm release.
4859 # This entry is straight from color_xterm's maintainer.
4860 # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
4861 # The README's with the distribution also say that it supports SGR 21, 24, 25
4862 # and 27, but they are not present in the terminfo or termcap.
4863 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
4864 OTbs, am, km, mir, msgr, xenl, XT,
4865 cols#80, it#8, lines#65, ncv@,
4866 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4867 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
4868 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4869 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
4870 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4871 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
4872 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
4873 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
4874 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
4875 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
4876 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
4877 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4878 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
4879 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
4880 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
4881 rmso=\E[27m, rmul=\E[24m,
4882 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
4884 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
4885 %;m%?%p9%t\016%e\017%;,
4886 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
4887 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
4888 smul=\E[4m, use=ecma+color, use=vt220+keypad,
4890 # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
4891 # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
4892 # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
4893 # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
4894 # that each of those implements the home, end, delete keys differently.
4896 # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
4897 # colors; note that this is not compatible with the 5.2 version.
4898 # csw (2002-05-15): make xterm-color primary instead of nxterm, to
4899 # match XFree86's xterm.terminfo usage and prevent circular links
4900 xterm-color|nxterm|generic color xterm,
4902 op=\E[m, use=xterm-r6, use=klone+color,
4904 # This entry describes an xterm with Sun-style function keys enabled
4905 # via the X resource setting "xterm*sunFunctionKeys:true"
4906 # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
4907 # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
4908 # because we want it to be seen as <kcpy>.
4909 # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
4910 # with their Sun keyboard labels instead.
4911 # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
4912 xterm-sun|xterm with sunFunctionKeys true,
4913 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
4914 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
4915 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
4916 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
4917 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
4918 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
4919 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
4920 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
4921 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
4922 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
4923 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
4924 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
4926 xterms-sun|small (80x24) xterm with sunFunctionKeys true,
4927 cols#80, lines#24, use=xterm-sun,
4930 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
4931 gnome-rh62|Gnome terminal,
4933 kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
4936 # GNOME Terminal 1.4.0.4 (Redhat 7.2)
4938 # This implements a subset of vt102 with a random selection of features from
4939 # other terminals such as color and function-keys.
4941 # shift-f1 to shift-f10 are f11 to f20
4943 # NumLock changes the application keypad to approximate vt100 keypad, except
4944 # that there is no escape sequence matching comma (,).
4946 # Other defects observed:
4947 # vt100 LNM mode is not implemented.
4948 # vt100 80/132 column mode is not implemented.
4949 # vt100 DECALN is not implemented.
4950 # vt100 DECSCNM mode is not implemented, so flash does not work.
4951 # vt100 TBC (tab reset) is not implemented.
4952 # xterm alternate screen controls do not restore cursor position properly
4953 # it hangs in tack after running function-keys test.
4954 gnome-rh72|GNOME Terminal,
4956 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
4957 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
4958 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
4960 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
4962 # GNOME Terminal 2.0.1 (Redhat 8.0)
4964 # Documentation now claims it implements vt220 (which is demonstrably false).
4965 # However, it does implement ECH, which is a vt220 feature. And there are
4966 # workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
4967 # more of its bugs using vttest.
4969 # However, note that bce and msgr are broken in this release. Tabs (tbc and
4970 # hts) are broken as well. Sometimes flash (as in xterm-new) works.
4972 # kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
4973 # operations. Shift-tab generates a distinct sequence so it can be argued
4974 # that it implements kcbt.
4975 gnome-rh80|GNOME Terminal,
4977 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?,
4978 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
4980 # GNOME Terminal 2.2.1 (Redhat 9.0)
4982 # bce and msgr are repaired.
4983 gnome-rh90|GNOME Terminal,
4985 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
4986 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
4987 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
4990 # GNOME Terminal 2.14.2 (Fedora Core 5)
4991 # Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
4992 gnome-fc5|GNOME Terminal,
4994 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
4996 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
4998 # GNOME Terminal 2.18.1 (2007 snapshot)
5000 # For any "recent" version of gnome-terminal, it is futile to attempt to
5001 # support modifiers on cursor- and keypad keys because the program usually
5002 # is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
5003 # of the keys (which more/less correspond to the termcap values), and will
5004 # interpret those according to the $TERM value, but others not in the
5005 # terminfo according to some constantly changing set of hacker guidelines -TD
5006 vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
5007 use=xterm+pcc2, use=gnome-fc5,
5008 gnome-2007|GNOME Terminal snapshot 2.18.1,
5011 # GNOME Terminal 2.22.3 (2008 snapshot)
5013 # In vttest, it claims to be a vt220 with national replacement character-sets,
5014 # but aside from the identifier string, implements only a small fraction of
5015 # vt220's behavior, which will make it less usable on a VMS system (unclear
5016 # what the intent of the developer is, since the NRC feature exposed in vttest
5017 # by this change does not work).
5018 vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
5019 use=vte+pcfkeys, use=vte-2007,
5020 gnome-2008|GNOME Terminal snapshot 2.22.3,
5023 # GNOME Terminal 3.6.0 (2012)
5024 # VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
5025 # in ncurses). It inherited from gnome-fc5, which broke the modified forms
5028 # Testing with tack shows that flash does not/has not worked -TD
5029 vte-2012|VTE 0.34.1,
5031 dim=\E[2m, flash@, invis=\E[8m, ritm=\E[23m,
5032 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
5033 %|%t;7%;m%?%p9%t\016%e\017%;,
5034 sitm=\E[3m, use=vte-2008,
5035 # Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
5036 # 61 differences from a correct entry for gnome terminal.
5037 gnome-2012|GNOME Terminal 3.6.0,
5040 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
5041 # supply key information which is not built into the program. With 2.22.3,
5042 # this list is built into the program (which addresses the inadvertent use of
5043 # random terminfo data, though using a set of values which does not correspond
5044 # to any that xterm produces - still not solving the problem that GNOME
5045 # terminal hardcodes the $TERM variable as "xterm").
5047 # terminfo modifier code keys
5048 # kf13-kf24 shift 2 F1 to F12
5049 # kf25-kf36 control 5 F1 to F12
5050 # kf37-kf48 shift/control 6 F1 to F12
5051 # kf49-kf60 alt 3 F1 to F12
5052 # kf61-kf63 shift-alt 4 F1 to F3
5054 # The parameters with \EO (SS3) are technically an error, since SS3 should have
5055 # no parameters. This appears to be rote copying based on xterm+pcc0.
5056 vte+pcfkeys|VTE's variation on xterm+pcfkeys,
5057 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
5058 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
5059 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
5060 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
5061 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
5062 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
5064 gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
5067 # deprecated - use "vte" for newer versions
5068 gnome|GNOME Terminal,
5071 # relevant changes were made in January 2014, and later.
5072 vte-2014|VTE 0.35.1,
5074 cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
5075 ich=\E[%p1%d@, indn=\E[%p1%dS, kent=\EOM, rin=\E[%p1%dT,
5076 rmso=\E[27m, rmul=\E[24m, use=xterm+pcfkeys,
5079 vte|VTE aka GNOME Terminal,
5082 vte-256color|VTE with xterm 256-colors,
5083 use=xterm+256color, use=vte,
5084 gnome-256color|GNOME Terminal with xterm 256-colors,
5087 # XFCE Terminal 0.2.5.4beta2
5089 # This is based on some of the same source code, e.g., the VTE library, as
5090 # gnome-terminal, but has fewer features, fails more screens in vttest.
5091 # Since most of the terminfo-related behavior is due to the VTE library,
5092 # the terminfo is the same as gnome-terminal.
5097 # Multi-Gnome-Terminal 1.6.2
5099 # This does not use VTE, and does have different behavior (compare xfce and
5101 mgt|Multi GNOME Terminal,
5102 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
5105 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
5106 # or not is debatable).
5109 kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
5112 # (formerly known as kvt)
5114 # This program hardcodes $TERM to 'xterm', which is not accurate. However, to
5115 # simplify this entry (and point out why konsole isn't xterm), we base this on
5116 # xterm-r6. The default keyboard appears to be 'linux'.
5119 # a) konsole implements several features from XFree86 xterm, though none of
5120 # that is documented - except of course in its source code - apparently
5121 # because its implementors are unaccustomed to reading documentation - as
5122 # evidenced by the sparse and poorly edited documentation distributed with
5123 # konsole. Some features such as the 1049 private mode are recognized but
5124 # incorrectly implemented as a duplicate of the 47 private mode.
5125 # b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
5126 # sends PC-style escapes rather than vt100.
5127 # c) fails vttest menu 3 (Test of character sets) because it does not properly
5128 # parse some control sequences. Also fails vttest Primary Device Attributes
5129 # by sending a bogus code (in the source it says it's supposed to be a
5130 # vt220, which is doubly incorrect because it does not implement vt220
5131 # control sequences except for a few special cases). Treat it as a
5132 # mildly-broken vt102.
5134 # Update for konsole 1.3.2:
5135 # The 1049 private mode works (but see the other xterm screens in vttest).
5136 # Primary Device Attributes now returns the code for a vt100 with advanced
5137 # video option. Perhaps that's intended to be a "mildly-broken vt102".
5139 # Updated for konsole 1.6.4:
5140 # add konsole-solaris
5142 # Updated for konsole 1.6.6:
5143 # add control-key modifiers for function-keys, etc.
5145 # Updated for konsole 2.12.4:
5148 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
5149 # different from xterm (and vt100's). They have the same behavior in this
5150 # detail, but it is unclear which copies the other.
5151 konsole-base|KDE console window,
5154 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
5155 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
5156 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=^?, kdch1=\E[3~,
5157 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
5158 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
5159 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, ritm=\E[23m,
5160 rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
5161 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
5162 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
5164 sgr0=\E[0m\017, sitm=\E[3m, smam=\E[?7h, vpa=\E[%i%p1%dd,
5165 use=ecma+color, use=xterm-r6,
5166 konsole-linux|KDE console window with linux keyboard,
5167 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
5168 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
5169 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
5170 kf8=\E[19~, kf9=\E[20~, use=konsole-base,
5171 konsole-solaris|KDE console window with Solaris keyboard,
5172 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5173 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
5174 # than testing the code.
5175 konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
5176 kend=\E[4~, khome=\E[1~, use=konsole-vt100,
5177 # The value for kbs reflects local customization rather than the settings used
5178 # for XFree86 xterm.
5179 konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
5180 kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
5182 # Konsole does not implement shifted cursor-keys.
5183 konsole+pcfkeys|konsole subset of xterm+pcfkeys,
5184 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
5186 # KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
5187 # it is still useful for deriving the other entries.
5188 konsole-vt100|KDE console window with vt100 (sic) keyboard,
5189 kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
5190 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
5191 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
5192 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5193 khome=\E[H, use=konsole-base,
5194 konsole-vt420pc|KDE console window with vt420 pc keyboard,
5195 kbs=^H, kdch1=^?, use=konsole-vt100,
5196 konsole-16color|klone of xterm-16color,
5197 ncv#32, use=ibm+16color, use=konsole,
5198 # make a default entry for konsole
5199 konsole|KDE console window,
5202 konsole-256color|KDE console window with xterm 256-colors,
5203 use=xterm+256setaf, use=konsole,
5206 # http://mlterm.sourceforge.net/
5208 mlterm|multi lingual terminal emulator,
5211 # Tested mlterm 3.2.2:
5212 # mlterm 3.x has made changes, but they are not reflected in the included
5213 # mlterm.ti; this entry is based on testing with tack and vttest -TD
5214 mlterm3|multi lingual terminal emulator,
5215 kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
5216 ritm=\E[23m, sitm=\E[3m, use=xterm+app, use=xterm+pcf0,
5217 use=xterm+pcc2, use=xterm+pce2, use=mlterm2,
5219 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
5221 # It is nominally a vt102 emulator, with features borrowed from rxvt and
5224 # The function keys are numbered based on shift/control/alt modifiers, except
5225 # that the control-modifier itself is used to spawn a new copy of mlterm (the
5226 # "-P" option). So control/F1 to control/F12 may not be usable, depending on
5227 # how it is configured.
5229 # kf1 to kf12 \E[11~ to \E[24~
5230 # shift kf1 to kf12 \E[11;2~ to \E[24;2~
5231 # alt kf1 to kf12 \E[11;3~ to \E[24;3~
5232 # shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
5233 # control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
5234 # control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
5235 # control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
5236 # control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
5238 mlterm2|multi lingual terminal emulator,
5239 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
5240 colors#8, cols#80, it#8, lines#24, pairs#64,
5241 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5242 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5243 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5244 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5245 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5246 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5247 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5248 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
5249 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5250 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
5251 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
5252 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
5253 kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH,
5254 kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, knp=\E[6~,
5255 kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, nel=\EE,
5256 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT,
5257 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
5258 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
5259 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
5260 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5261 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
5263 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
5264 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5265 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
5266 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
5268 # The insert/delete/home/end keys do not respond to modifiers because mlterm
5269 # looks in its termcap to decide which string to send. If it used terminfo
5270 # (when available), it could use the extended names introduced for xterm.
5271 mlterm+pcfkeys|fragment for PC-style fkeys,
5272 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
5273 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
5274 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
5275 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
5276 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
5277 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
5278 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
5279 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
5280 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
5282 mlterm-256color|mlterm 3.0 with xterm 256-colors,
5283 use=xterm+256color, use=mlterm,
5286 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
5287 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
5290 # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
5291 # but some applications don't work with that.
5292 # It also has an AIX extension
5296 # but the latter does not work correctly.
5298 # The distributed terminfo says it implements hpa and vpa, but they are not
5299 # implemented correctly, using relative rather than absolute positioning.
5301 # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
5302 # Since rxvt is not really compatible with xterm, it should be configured as
5303 # "rxvt" or "rxvt-color".
5305 # removed dch/dch1 because they are inconsistent with bce/ech -TD
5306 # remove km as per tack test -TD
5307 rxvt-basic|rxvt terminal base (X Window System),
5308 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
5309 cols#80, it#8, lines#24,
5310 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5311 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5312 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5313 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5314 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5315 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5316 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
5317 enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
5318 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
5319 il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l,
5320 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
5321 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5322 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
5324 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5325 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5327 s0ds=\E(B, s1ds=\E(0, sc=\E7,
5328 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
5330 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
5331 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
5332 use=rxvt+pcfkeys, use=vt220+keypad,
5333 # Key Codes from rxvt reference:
5335 # Note: Shift + F1-F10 generates F11-F20
5337 # For the keypad, use Shift to temporarily override Application-Keypad
5338 # setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
5339 # is off, escape sequences toggle Application-Keypad setting.
5340 # Also note that values of Home, End, Delete may have been compiled
5341 # differently on your system.
5343 # Normal Shift Control Ctrl+Shift
5344 # Tab ^I ESC [ Z ^I ESC [ Z
5345 # BackSpace ^H ^? ^? ^?
5346 # Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
5347 # Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
5348 # Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5349 # Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
5350 # Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
5351 # Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
5352 # Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
5353 # End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
5354 # Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
5355 # F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
5356 # F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
5357 # F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
5358 # F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
5359 # F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
5360 # F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
5361 # F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
5362 # F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
5363 # F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
5364 # F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
5365 # F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
5366 # F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
5367 # F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
5368 # F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
5369 # F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
5370 # F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
5371 # F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
5372 # F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
5373 # F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
5374 # F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
5377 # Up ESC [ A ESC [ a ESC O a ESC O A
5378 # Down ESC [ B ESC [ b ESC O b ESC O B
5379 # Right ESC [ C ESC [ c ESC O c ESC O C
5380 # Left ESC [ D ESC [ d ESC O d ESC O D
5381 # KP_Enter ^M ESC O M
5382 # KP_F1 ESC O P ESC O P
5383 # KP_F2 ESC O Q ESC O Q
5384 # KP_F3 ESC O R ESC O R
5385 # KP_F4 ESC O S ESC O S
5386 # XK_KP_Multiply * ESC O j
5387 # XK_KP_Add + ESC O k
5388 # XK_KP_Separator , ESC O l
5389 # XK_KP_Subtract - ESC O m
5390 # XK_KP_Decimal . ESC O n
5391 # XK_KP_Divide / ESC O o
5403 # The source-code for rxvt actually defines mappings for F21-F35, using
5404 # "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
5405 # are rare, so this entry uses the shift- and control-modifiers as in
5406 # xterm+pcfkeys to define keys past F12.
5408 # kIC is normally not used, since rxvt performs a paste for that (shifted
5409 # insert), unless private mode 35 is set.
5411 # kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
5412 # Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
5413 rxvt+pcfkeys|fragment for PC-style fkeys,
5414 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
5415 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
5416 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
5417 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
5418 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
5419 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
5420 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
5421 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
5422 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
5423 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
5424 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
5425 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
5426 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
5427 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5428 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
5429 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
5430 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
5431 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
5432 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
5433 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
5435 # rxvt was originally "xvt", first announced in April 1993:
5436 # http://www.informatica.co.cr/linux-desktops/research/1993/0416.html
5438 # Though its change-log does not mention this, John Davis has stated that he
5439 # was the author of the changes to use the bce ("new color model") which was
5440 # incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
5441 # dates, nor give developer's names. Initial color support was added for rxvt
5442 # "2.0", which was sometime in 1994.
5444 # rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
5445 # work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
5447 # http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
5448 # was from one of my bug-reports -TD
5450 # While the color model both for xterm and rxvt was based on Linux console,
5451 # Olesen (or possibly Davis) diverged in one respect from Linux's bce color
5452 # behavior: inserting/deleting characters does not fill the newly empty cell
5453 # with the default background color.
5454 rxvt|rxvt terminal emulator (X Window System),
5456 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
5457 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
5458 rxvt-color|rxvt terminal emulator (X Window System),
5460 rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
5461 use=xterm+256color, use=rxvt,
5462 rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
5463 use=xterm+88color, use=rxvt,
5464 rxvt-xpm|rxvt terminal emulator (X Window System),
5466 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
5467 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5468 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5469 \302x\263y\363z\362{\343|\330}\234~\376,
5471 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
5472 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
5473 \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
5474 \302x\263y\363z\362{\343|\330~\376,
5477 # This variant is supposed to work with rxvt 2.7.7 when compiled with
5478 # NO_BRIGHTCOLOR defined. rxvt needs more work...
5479 rxvt-16color|rxvt with 16 colors like aixterm,
5480 ncv#32, use=ibm+16color, use=rxvt,
5485 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
5486 # makes its function-keys different from other flavors of rxvt -TD
5488 # Testing with tack:
5489 # + made custom description (below) to work, though it sets TERM=xterm.
5491 # Testing with vttest:
5492 # + While "based on" rxvt, some of the basic functionality is broken. The
5493 # window collapses to a single line when running several of the screens
5494 # in vttest, e.g., the tests for cursor movement, screen features,
5495 # double-sized characters.
5496 # + The vt52 test works properly, but this is an exception. Due to the
5497 # other bug(s) most of vttest is untestable.
5498 # + the color test using ECH shows a gap in the bce model, like rxvt.
5500 # Testing with xterm "vttest" scripts:
5501 # + resize.pl does not work because mrxvt does implement CSI 18 t
5502 # (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
5503 # + none of the "dynamic colors" (OSC colors) scripts work.
5504 mrxvt|multitabbed rxvt,
5506 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
5507 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
5508 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
5509 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
5510 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
5511 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
5514 mrxvt-256color|multitabbed rxvt with 256 colors,
5515 use=xterm+256color, use=mrxvt,
5518 # From: Michael Jennings <mej@valinux.com>
5522 # removed kf0 which conflicts with kf10 -TD
5523 # remove cvvis which conflicts with cnorm -TD
5524 # Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
5525 # but does otherwise follow the rxvt+pcfkeys model -TD
5526 # remove nonworking flash -TD
5527 # remove km as per tack test -TD
5528 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
5529 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
5530 btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
5531 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5532 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5533 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
5534 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5535 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5536 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5537 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5538 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
5539 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5540 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
5541 is1=\E[?47l\E>\E[?1l,
5542 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
5543 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
5544 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
5545 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5546 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
5547 rmso=\E[27m, rmul=\E[24m,
5548 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
5549 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
5552 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5553 %;m%?%p9%t\016%e\017%;,
5554 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
5555 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5556 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
5559 Eterm-256color|Eterm with xterm 256-colors,
5560 use=xterm+256color, use=Eterm,
5562 Eterm-88color|Eterm with 88 colors,
5563 use=xterm+88color, use=Eterm,
5566 # Based on rxvt 2.4.8, it has a few differences in key bindings
5567 aterm|AfterStep terminal,
5569 kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
5573 # This is not based on xterm's source...
5574 # vttest shows several problems with keyboard, cursor-movements.
5575 # see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
5576 xiterm|internationalized terminal emulator for X,
5578 kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6,
5582 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
5583 # from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
5584 # chars look like --esr)
5585 hpterm|X-hpterm|hp X11 terminal emulator,
5586 am, da, db, mir, xhp,
5587 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
5588 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
5589 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
5590 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
5591 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
5592 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5593 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
5594 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
5595 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
5596 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
5597 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
5598 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
5599 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
5600 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
5601 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
5603 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
5604 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
5605 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
5606 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
5607 # HPUX 11 provides a color version.
5608 hpterm-color|HP X11 terminal emulator with color,
5612 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
5613 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
5616 # This is for the extensible terminal emulator on the X11R6 contrib tape.
5617 # It corresponds to emu's internal emulation:
5619 # emu's default sets TERM to "xterm", but that doesn't work well -TD
5620 # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
5621 # fixes: add civis, cnorm, sgr -TD
5622 emu|emu native mode,
5623 am, bce, mir, msgr, xon,
5624 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
5625 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
5626 \224t\225u\226v\227w\230x\231~\244,
5627 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
5628 cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
5629 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
5630 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
5631 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
5632 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
5633 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
5634 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
5635 kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01,
5636 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
5637 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
5638 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
5639 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
5640 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
5641 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
5642 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
5644 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
5646 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
5648 # vt220 Terminfo entry for the Emu emulation, corresponds to
5650 # with NumLock set (to make the keypad transmit kf0-kf9).
5651 # fixes: add am, xenl, corrected sgr0 -TD
5652 emu-220|Emu-220 (vt200-7bit mode),
5654 cols#80, it#8, lines#24, vt#200,
5655 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
5656 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
5657 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
5658 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
5659 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
5660 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
5661 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
5662 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
5663 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
5664 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
5665 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
5666 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
5667 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
5668 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
5669 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
5670 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
5671 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
5672 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
5673 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
5674 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
5675 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
5676 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
5677 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5678 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
5679 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
5682 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
5683 # print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
5684 # indicate that it emulates more than one terminal, but incompletely.
5686 # This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
5687 # It is based on vt102's entry, with some subtle differences, but also
5689 # supports ANSI colors (except for 'op' string)
5690 # apparently implements alternate screen like xterm
5691 # does not use padding, of course.
5692 mvterm|vv100|SwitchTerm aka mvTERM,
5693 am, eslok, hs, km, mir, msgr, xenl,
5694 colors#8, cols#80, it#8, lines#24, pairs#64,
5695 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5696 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
5697 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5698 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5699 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5700 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
5701 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
5702 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
5703 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H,
5704 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
5705 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
5706 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
5707 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
5709 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
5710 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5711 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
5712 %;m%?%p9%t\016%e\017%;,
5713 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
5714 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
5715 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
5719 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
5721 # "mterm -type ansi" sets $TERM to "ansi"
5722 mterm-ansi|ANSI emulation,
5725 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5726 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
5727 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
5728 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
5729 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
5730 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
5731 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
5732 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
5733 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
5734 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
5736 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5737 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5738 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
5740 # mterm normally sets $TERM to "mterm"
5741 mterm|mouse-sun|Der Mouse term,
5744 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S,
5745 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
5746 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W,
5747 rmir=^O, rmso=^T, smir=^Q, smso=^V,
5748 # "mterm -type decansi" sets $TERM to "decansi"
5750 # note: kdch1, kfnd, kslt are in the source code, but do not work -TD
5751 decansi|ANSI emulation with DEC compatibility hacks,
5752 am, mir, msgr, xenl,
5753 colors#8, it#8, pairs#64,
5754 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5755 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5756 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
5757 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
5758 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
5759 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5760 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
5761 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
5762 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
5763 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
5764 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
5765 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
5766 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
5767 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
5768 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
5769 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
5770 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
5771 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
5772 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
5773 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
5774 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5775 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
5776 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
5777 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
5778 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
5779 u7=\E[6n, vpa=\E[%i%p1%dd,
5782 # http://vwm.sourceforge.net/
5784 # VWM 2.0.2 (2009-05-01)
5785 # vwmterm is a terminal emulator written for the VWM console window manager.
5786 # This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
5788 am, bce, ccc, mir, msgr, npc, xenl, xon,
5790 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5791 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
5792 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD,
5793 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
5794 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
5795 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
5796 home=\E[H, il1=\E[L, ind=\n, invis=\E[8m, kcub1=\E[D,
5797 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
5798 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
5799 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
5800 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5801 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
5802 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
5803 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5804 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
5805 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
5806 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
5807 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
5811 # MGR is a Bell Labs window system lighter-weight than X.
5812 # These entries describe MGR's xterm-equivalent.
5813 # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
5816 mgr|Bellcore MGR (non X) window system terminal emulation,
5818 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
5819 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
5820 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
5821 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
5822 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
5823 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
5824 il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
5825 kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S,
5826 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
5828 mgr-sun|Mgr window with Sun keyboard,
5829 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
5830 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
5831 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
5832 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
5833 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
5834 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
5835 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
5836 mgr-linux|Mgr window with Linux keyboard,
5837 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
5838 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
5839 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
5840 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5841 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
5847 # This version uses a table which supports a single modifier (a subset of
5848 # xterm's keys, using the same scheme). Because it supports only a single
5849 # modifier in this table, function keys f36-f48 are normally unavailable
5850 # because they are assigned to modifier-4.
5852 # The program assigns TERM to match the program name (the upstream source says
5853 # "st", but Debian renames it to "stterm").
5855 # The source includes two entries which are not useful here:
5856 # st-meta| simpleterm with meta key,
5857 # st-meta-256color| simpleterm with meta key and 256 colors,
5858 # because st's notion of "meta" does not correspond to the terminfo definition.
5859 # Rather, it acts like xterm - when the meta feature is disabled.
5862 # Added eo, removed ul -TD
5865 # implements control-modifier, but not control-shift for special keys
5866 # implements alt-modifier, but not alt-shift for special keys
5869 # http://git.suckless.org/st/log/st.info
5870 # Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
5871 # still has no function keys past kf36 (no combinations of modifiers)
5872 # no application keypad mode, e.g, kent.
5873 st|stterm| simpleterm 0.4.1,
5874 am, bce, hs, mir, msgr, npc, xenl, Tc, XT,
5875 colors#8, cols#80, it#8, lines#24, pairs#64,
5876 acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
5878 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
5879 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
5880 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
5881 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5882 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5883 cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
5884 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
5885 enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
5886 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
5887 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
5888 invis=\E[8m, is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~,
5889 kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D,
5890 kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~,
5891 ka3=\E[5~, kb2=\EOu, kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z,
5892 kclr=\E[3;5~, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
5893 kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F,
5894 kel=\E[1;2F, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
5895 kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q,
5896 kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
5897 kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
5898 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
5899 kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
5900 kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
5901 kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
5902 kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
5903 kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
5904 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
5905 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
5906 kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
5907 kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
5908 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
5909 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
5910 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
5911 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
5912 kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
5913 kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, mc4=\E[4i,
5914 mc5=\E[5i, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
5915 ritm=\E[23m, rmacs=\E(B, rmcup=\E[?1049l, rmir=\E[4l,
5916 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
5917 rs2=\E[4l\E>\E[?1034l, sc=\E7, setab=\E[4%p1%dm,
5919 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5921 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
5923 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
5924 %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
5925 sgr0=\E[0m, sitm=\E[3m, smacs=\E(0, smcup=\E[?1049h,
5926 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
5927 tbc=\E[3g, tsl=\E]0;, u6=\E[%i%d;%dR, u7=\E[6n,
5928 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, Se=\E[2 q,
5933 # Note: the original terminfo description uses leading blank to persuade
5934 # ncurses to use "st" as its name. Proper fix for that is to use "st" as an
5937 # Reading the code shows it should work for aixterm 16-colors
5938 # - added st-16color
5941 # - set eo (erase-overstrike)
5943 # - tbc doesn't work
5945 # - cbt doesn't work
5946 # - shifted cursor-keys send sequences like rxvt
5947 # - sgr referred to unimplemented "invis" mode.
5948 # Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
5949 simpleterm|old-st| simpleterm 0.1.1,
5950 am, eo, mir, msgr, ul, xenl,
5951 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
5952 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
5953 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
5954 cnorm=\E[?12l\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
5955 cub1=^H, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
5956 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
5957 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
5958 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
5959 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^?,
5960 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5961 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
5962 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
5963 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
5964 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
5965 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
5966 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
5967 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
5969 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
5970 st-16color|stterm-16color|simpleterm with 16-colors,
5971 use=ibm+16color, use=st,
5972 # 256 colors "works", but when running xterm's test-scripts, some garbage is
5973 # shown in the titlebar.
5975 # terminal wants to use TERM=stterm-256color, but that is longer than 14
5976 # characters, making the choice nonportable.
5977 st-256color|stterm-256color|simpleterm with 256 colors,
5979 initc@, oc@, use=xterm+256color, use=st,
5982 # https://code.google.com/p/jessies/
5983 # Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
5984 # Debian/current -TD (2011/8/20)
5986 # There are some packaging problems:
5987 # a) using Java, the program starts off using 50Mb, and climbs from there,
5988 # up to 114Mb after testing (no scrollback).
5989 # b) it insists on reinstalling its terminal description in $HOME/.terminfo
5990 # (two copies, just in case the host happens to be Mac OS X).
5991 # I deleted this after testing with tack.
5993 # Issues/features found with tack:
5994 # a) tbc does not work (implying that hts also is broken).
5995 # Comparing with the tabs utility shows a problem with the last tabstop on
5997 # b) has xterm-style shifted function-key strings
5998 # meta also is used, but control is ignored.
5999 # c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
6001 # d) some combinations of shift/control send xterm-style sequences for
6002 # insert/delete/home/end.
6003 # e) numeric keypad sends only numbers (compare with vttest).
6004 # f) meta mode (km) is not implemented.
6006 # Issues found with ncurses test-program:
6007 # a) bce is inconsistently implemented
6008 # b) widths of Unicode values above 256 do not always agree with wcwidth.
6010 # Checked with vttest, found low degree of compatibility there.
6012 # Checked with xterm's scripts, found that the 256-color palette is fixed.
6016 # b) corrected sgr0 to reset alternate character set
6017 # c) modified smacs/rmacs to use SCS rather than SI/SO
6020 terminator|Terminator no line wrap,
6021 eo, mir, msgr, xenl, xon,
6022 colors#0x100, cols#80, it#8, lines#24, lm#0, pairs#0x7fff,
6023 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6024 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
6025 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
6026 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
6027 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6028 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
6029 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6030 enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG,
6031 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
6032 is1=\E[?47l\E=\E[?1l,
6033 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
6034 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6035 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6036 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
6037 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6038 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6039 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
6040 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
6041 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
6042 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6043 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
6044 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
6045 setaf=\E[38;5;%p1%dm,
6046 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t
6048 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
6049 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
6053 # http://enlightenment.org
6055 # Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a vt100
6056 # emulator, nor is it compatible with xterm, but it uses a few features from
6060 # cursor does not fill on focus
6061 # there are pervasive problems with clearing/erasing parts of the screen
6062 # resizing the window causes it to stop listening to the keyboard
6064 # doesn't understand vt100 CPR needed for resize
6069 # uses bce model for colors, but (see below) fails the vttest screens
6070 # has partial support for 256color feature.
6071 # tack function-keys (a subset of xterm+pcf0), and
6072 # tack cursor-keys (a subset of xterm+pce2):
6073 # ctrl+shift (ignored)
6075 # shift-alt modifier -> shift (2)
6079 # tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
6080 # ctrl + khome/kend works - none of the other modifiers do
6082 # spits lots of messages from termptyesc.c especially in vttest.
6083 # no 132-column mode
6084 # fails menu 1, 2 (definitely not vt100-compatible)
6085 # primary (claims vt420 with several options, apparently none work) and
6086 # secondary report says (perhaps... vt420): \E[>41;285;0c
6087 # CHA, HPR, VPA, CNL, CPL work
6088 # BCE with ED/EL - fail
6089 # BCE with ECH/indexing - fail
6091 # unlike teken, background light/dark works
6093 # X10 and Normal mouse work
6094 # Any-event mouse works
6095 # Mouse button-event works
6097 # This description uses xterm+pcf0, which is misleading because the program
6098 # does not handle combinations of modifiers - but listing them all would
6099 # involve more effort than its developers spent -TD
6100 terminology|EFL-based terminal emulator,
6102 blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
6103 kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6104 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6105 kind=\E[1;2B, kri=\E[1;2A,
6106 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
6107 %;m%?%p9%t\016%e\017%;$<2>,
6108 vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
6109 kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
6110 kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
6111 kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
6112 kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
6113 kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
6114 kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
6115 kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
6118 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
6121 # Columbus UNIX virtual terminal. This terminal also appears in
6122 # UNIX 4.0 and successors as line discipline 1 (?), but is
6123 # undocumented and does not really work quite right.
6124 cbunix|cb unix virtual terminal,
6126 cols#80, lines#24, lm#0,
6127 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
6128 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
6129 el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB,
6130 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
6131 smso=\Ea^D, smul=\Ea^A,
6132 # (vremote: removed obsolete ":nl@:" -- esr)
6133 vremote|virtual remote terminal,
6135 cols#79, use=cbunix,
6137 pty|4bsd pseudo teletype,
6138 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
6139 smso=\Ea$, smul=\Ea!, use=cbunix,
6143 # https://www.emacswiki.org/emacs/AnsiTerm
6144 # https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
6146 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
6147 eterm|gnu emacs term.el terminal emulation,
6150 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6151 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6152 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6153 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6154 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6155 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6156 il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m,
6157 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
6158 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
6161 # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
6162 eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
6163 am, mir, msgr, xenl,
6164 colors#8, cols#80, lines#24, pairs#64,
6165 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
6166 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6167 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6168 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6169 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6170 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
6171 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kbs=^?,
6172 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
6173 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
6174 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
6175 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
6176 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
6177 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
6179 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
6180 u6=\E[%i%d;%dR, u7=\E[6n,
6182 # shell.el can "do" color, though not nearly as well.
6185 # http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
6188 # https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
6189 # https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
6190 # https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
6192 # however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
6193 # frequently. The contemporaneous term.el aka ansi-term does not "support"
6194 # italics but does not lose the color information -TD 2017/01/28.
6195 dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
6197 colors#8, it#8, ncv#13, pairs#64,
6198 bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m,
6199 ritm=\E[23m, rmul=\E[24m, setab=\E[4%p1%dm,
6200 setaf=\E[3%p1%dm, sgr0=\E[m, sitm=\E[3m, smul=\E[4m,
6204 # Entries for use by the `screen' program by Juergen Weigert,
6205 # Michael Schroeder, Oliver Laumann. The screen and
6206 # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
6207 # come from University of Wisconsin and may be older.
6208 # (screen: added <cnorm> on ANSI model -- esr)
6210 # 'screen' defines extensions to termcap. Some are used in its terminal
6212 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
6213 # AX (bool) Does understand ANSI set default fg/bg color
6214 # (\E[39m / \E[49m).
6215 # S0 (str) Switch charset 'G0' to the specified charset.
6216 # E0 (str) Switch charset 'G0' back to standard charset.
6218 # Initially tested with screen 3.09.08
6220 # According to its manual page
6222 # Screen is a full-screen window manager that multiplexes a physical
6223 # terminal between several processes (typically interactive shells). Each
6224 # virtual terminal provides the functions of a DEC VT100 terminal and, in
6225 # addition, several control functions from the ISO 6429 (ECMA 48, ANSI
6226 # X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
6227 # multiple character sets).
6229 # However, there is a design error in its support for video highlights. The
6230 # program uses a table (rendlist) which equates the SGR codes to terminal
6231 # capabilities. That, and color-decoding are hardcoded in screen; its behavior
6232 # is modified only by the presence or absence of the corresponding capabilities.
6233 # Not by their values.
6235 # If screen sets the TERMCAP variable, it uses hardcoded strings which
6236 # correspond to the rendlist table.
6238 # The table gives this information:
6250 # 22 reset bold, standout and dim
6252 # 24 reset underline
6257 # ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
6258 # ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
6259 # Without some redesign of screen, it is not possible to extend the set of
6260 # capabilities. Substitution would be possible, e.g., sending italics in
6261 # place of underline.
6263 # Because screen uses hard-coded parsing, it does not check if two capabilities
6264 # use the same value. For example, changing standout to be the same as any of
6265 # the other capabilities will confuse screen. Curses applications which use
6266 # sgr are not impacted (because that usually resets all capabilities before
6267 # setting any), but termcap applications do not use sgr -TD
6268 screen|VT 100/ANSI X3.64 virtual terminal,
6269 OTbs, OTpt, am, km, mir, msgr, xenl, G0,
6270 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
6271 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
6273 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6274 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r,
6275 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6276 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6277 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6278 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
6279 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6280 enacs=\E(B\E)0, flash=\Eg, home=\E[H, ht=^I, hts=\EH,
6281 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0,
6282 kbs=^H, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6283 kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
6284 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6285 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6286 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
6287 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
6288 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
6289 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
6290 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
6291 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
6292 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
6293 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
6294 S0=\E(%p1%c, use=ecma+color,
6295 # The bce and status-line entries are from screen 3.9.13 (and require some
6296 # changes to .screenrc).
6297 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
6300 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
6301 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
6303 # ======================================================================
6304 # Entries for GNU Screen with 16 colors.
6305 # Those variations permit to benefit from 16 colors palette, and from
6306 # bold font and blink attribute separated from bright colors. But they
6307 # are less portable than the generic "screen" 8 color entries: Their
6308 # usage makes real sense only if the terminals you attach and reattach
6309 # do all support 16 color palette.
6311 screen-16color|GNU Screen with 16 colors,
6312 use=ibm+16color, use=screen,
6314 screen-16color-s|GNU Screen with 16 colors and status line,
6315 use=ibm+16color, use=screen-s,
6317 screen-16color-bce|GNU Screen with 16 colors and BCE,
6318 use=ibm+16color, use=screen-bce,
6320 screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
6321 bce, use=ibm+16color, use=screen-s,
6323 # ======================================================================
6324 # Entries for GNU Screen 4.02 with --enable-colors256.
6326 screen-256color|GNU Screen with 256 colors,
6327 use=xterm+256setaf, use=screen,
6329 screen-256color-s|GNU Screen with 256 colors and status line,
6330 use=xterm+256setaf, use=screen-s,
6332 screen-256color-bce|GNU Screen with 256 colors and BCE,
6333 bce, use=xterm+256setaf, use=screen-bce,
6335 screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
6336 bce, use=xterm+256setaf, use=screen-s,
6338 screen.xterm-256color|GNU Screen with xterm using 256 colors,
6339 use=xterm+256setaf, use=screen.xterm-new,
6341 screen.konsole-256color|GNU Screen with konsole using 256 colors,
6342 use=xterm+256setaf, use=screen.konsole,
6344 screen.vte-256color|GNU Screen with vte using 256 colors,
6345 use=xterm+256setaf, use=screen.vte,
6347 screen.putty-256color|GNU Screen with putty using 256 colors,
6348 use=xterm+256setaf, use=screen.putty,
6350 screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
6351 use=xterm+256setaf, use=screen.mlterm,
6353 # ======================================================================
6355 # Read the fine manpage:
6356 # When screen tries to figure out a terminal name for
6357 # itself, it first looks for an entry named "screen.<term>",
6358 # where <term> is the contents of your $TERM variable. If
6359 # no such entry exists, screen tries "screen" (or "screen-w"
6360 # if the terminal is wide (132 cols or more)). If even this
6361 # entry cannot be found, "vt100" is used as a substitute.
6363 # Notwithstanding the manpage, screen uses its own notion of the termcap
6364 # and some keys from "screen.<term>" are ignored. Here is an entry which
6365 # covers those (tested with screen 4.00.02) -TD
6366 screen+fkeys|function-keys according to screen,
6367 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
6370 # See explanation before "screen" entry. Cancel italics so that applications
6371 # do not assume screen supports the feature. Add this tweak to entries which
6372 # extend screen for terminals which do support italics.
6373 screen+italics|screen cannot support italics,
6376 # Here are a few customized entries which are useful -TD
6379 # (a) screen does not support invis.
6380 # (b) screen's implementation of bw is incorrect according to tack.
6381 # (c) screen appears to hardcode the strings for khome/kend, making it
6382 # necessary to override the "use=" clause's values (screen+fkeys).
6383 # (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
6384 # which is NOT the same as the terminfo screen.<term>.
6385 # (e) when screen finds one of these customized entries, it sets $TERM to
6386 # match. Hence, no "screen.xterm" entry is provided, since that would
6387 # create heartburn for people running remote xterm's.
6389 # xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
6390 # since the default translations override the built-in keycode
6391 # translation. They are suppressed here to show what is tested by tack.
6392 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
6394 invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
6395 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
6396 %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
6397 E3@, use=screen+italics, use=screen+fkeys, use=xterm-new,
6398 #:screen.xterm|screen for modern xterm,
6399 #: use=screen.xterm-new,
6400 # xterm-r6 does not really support khome/kend unless it is propped up by
6401 # the translations resource.
6402 screen.xterm-r6|screen customized for X11R6 xterm,
6403 bw, use=screen+fkeys, use=xterm-r6,
6404 # Color applications running in screen and TeraTerm do not play well together
6405 # on Solaris because Sun's curses implementation gets confused.
6406 screen.teraterm|disable ncv in teraterm,
6408 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
6409 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
6410 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
6411 use=screen+fkeys, use=screen,
6413 screen.rxvt|screen in rxvt,
6415 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6416 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
6417 use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
6418 screen.Eterm|screen in Eterm,
6419 use=screen+fkeys, use=Eterm,
6420 screen.mrxvt|screen in mrxvt,
6421 use=screen+fkeys, use=mrxvt,
6422 screen.vte|screen in any VTE-based terminal,
6423 use=screen+italics, use=screen+fkeys, use=vte,
6424 screen.gnome|screen in GNOME Terminal,
6425 use=screen+italics, use=screen+fkeys, use=gnome,
6426 screen.konsole|screen in KDE console window,
6427 use=screen+italics, use=screen+fkeys, use=konsole,
6428 # fix the backspace key
6429 screen.linux|screen in linux console,
6431 kbs=^?, kcbt@, use=screen+fkeys, use=screen,
6432 screen.mlterm|screen in mlterm,
6433 use=screen+fkeys, use=mlterm,
6434 screen.putty|screen in putty,
6435 use=screen+fkeys, use=putty,
6437 # The default "screen" entry is reasonably portable, but not optimal for the
6438 # most widely-used terminal emulators. The "bce" capability is supported in
6439 # screen since 3.9.13, and when used, will require fewer characters to be sent
6440 # to the terminal for updates.
6442 # If you are using only terminals which support bce, then you can use this
6443 # feature in your screen configuration.
6445 # Adding these lines to your ".screenrc" file will allow using these customized
6450 screen-bce.xterm-new|screen optimized for modern xterm,
6452 ech@, use=screen+italics, use=screen.xterm-new,
6453 screen-bce.rxvt|screen optimized for rxvt,
6455 ech@, use=screen.rxvt,
6456 screen-bce.Eterm|screen optimized for Eterm,
6458 ech@, use=screen.Eterm,
6459 screen-bce.mrxvt|screen optimized for mrxvt,
6461 ech@, use=screen.mrxvt,
6462 screen-bce.gnome|screen optimized for GNOME-Terminal,
6464 ech@, use=screen+italics, use=screen.gnome,
6465 screen-bce.konsole|screen optimized for KDE console window,
6467 ech@, use=screen+italics, use=screen.konsole,
6468 screen-bce.linux|screen optimized for linux console,
6470 ech@, use=screen.linux,
6472 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
6473 cols#132, use=screen,
6475 screen2|old VT 100/ANSI X3.64 virtual terminal,
6476 cols#80, it#8, lines#24,
6477 cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H,
6478 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
6479 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6480 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6481 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
6482 il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
6483 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
6484 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
6485 nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
6486 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
6487 smso=\E[3m, smul=\E[4m, tbc=\E[3g,
6488 # (screen3: removed unknown ":xv:LP:G0:" -- esr)
6489 screen3|older VT 100/ANSI X3.64 virtual terminal,
6491 cols#80, it#8, lines#24,
6492 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
6493 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6494 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6495 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6496 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6497 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
6498 il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD,
6499 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
6500 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
6501 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
6502 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
6503 smul=\E[4m, tbc=\E[3g,
6507 # tmux is compatible with screen, but has support for italics, and some of the
6508 # xterm cursor bits.
6509 tmux|tmux terminal multiplexer,
6510 ritm=\E[23m, rmso=\E[27m, sitm=\E[3m, smso=\E[7m,
6511 use=ecma+strikeout, use=xterm+edit, use=xterm+pcfkeys,
6512 use=xterm+sl, use=xterm+tmux, use=screen,
6514 tmux-256color|tmux with 256 colors,
6515 use=xterm+256setaf, use=tmux,
6520 # http://www.brain-dump.org/projects/dvtm/
6522 # + This uses ncurses to manage the display, including support for italics and
6524 # + However, default-colors are incomplete: do not set bce.
6525 # + It does not implement flash (since no \e[?5h)
6526 # + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
6527 # Oddly enough, if $TERM contains "linux", it attempts to set the title.
6528 # + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
6529 # + The built-in table of function-keys (based on rxvt) is incomplete (ends
6531 # + It also omits the shifted cursor- and editing-keypad keys.
6532 # However, it is confused by xterm's shifted cursor- and editing-keypad keys
6533 # (and passes those through without interpretation)
6534 # and may simply pass-through rxvt's, making it appear to work.
6535 # In other cases such as kf23 and up, no pass-through is done.
6536 # + Most of the mode-settings in the initialization/reset strings are not
6537 # implemented; dvtm copies its description from rxvt.
6538 dvtm|dynamic virtual terminal manager,
6539 am, eo, mir, msgr, xenl, AX,
6540 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
6541 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6542 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6543 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
6544 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6545 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6546 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6547 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
6548 enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
6549 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
6550 is1=\E[?47l\E=\E[?1l,
6551 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
6552 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
6553 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
6554 kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
6555 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
6556 kel=\E[8\^, kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~,
6557 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6558 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6559 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
6560 kf21=\E[23$, kf22=\E[24$, kf3=\E[13~, kf4=\E[14~,
6561 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6562 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a,
6563 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[b, kslt=\E[4~,
6564 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, ritm=\E[23m,
6565 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[27m,
6567 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
6568 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
6570 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
6572 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
6574 sgr0=\E[m\017, sitm=\E[3m, smacs=^N, smcup=\E7\E[?47h,
6575 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6578 dvtm-256color|dynamic virtual terminal manager with 256 colors,
6579 colors#0x100, pairs#0x7fff,
6580 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
6582 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
6588 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
6589 # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
6590 # been maintained until recently by the National Center for Supercomputer
6591 # Applications, and it is feature rich, stable and free. It can be downloaded
6592 # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
6593 # xterm+sl, and the docs at NCSA. It works well.
6595 # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
6596 # The terminal options should be set as follows:
6597 # Xterm sequences ON
6598 # use VT wrap mode ON
6599 # use Emacs arrow keys OFF
6600 # CTRL-COMND is Emacs meta ON
6602 # answerback string: "ncsa-vt220-8"
6603 # setup keys: all disabled
6605 # Application mode is not used.
6607 # Other special mappings:
6614 # PAGEDOWN Next Screen
6616 # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
6619 # The status-line manipulation is a mapping of the xterm-compatible control
6620 # sequences for setting the window-title. So you must use tsl and fsl in
6621 # pairs, since the latter ends the string that is loaded to the window-title.
6622 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
6623 am, km, mir, msgr, xenl,
6624 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6625 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
6626 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
6627 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6628 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
6629 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6630 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
6631 el=\E[K, el1=\E[1K, enacs=\E)0,
6632 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
6633 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
6634 il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
6635 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
6636 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6637 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
6638 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
6639 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
6640 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
6641 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
6642 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
6643 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
6644 rmso=\E[27m, rmul=\E[24m,
6645 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
6646 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
6648 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
6649 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6650 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
6651 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6652 use=ncsa-m, use=klone+color,
6653 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
6655 dsl@, fsl@, tsl@, use=ncsa,
6656 ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
6658 dsl@, fsl@, tsl@, use=ncsa-m,
6660 # The documented function-key mapping refers to the Apple Extended Keyboard
6661 # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
6662 # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
6663 # some keyboards and many applications require these as F1-F4.
6665 ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
6666 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6667 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
6668 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
6669 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
6670 kf8=\E[19~, kf9=\E[20~, use=ncsa,
6672 #### Pilot Pro Palm-Top
6674 # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
6675 # https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
6676 pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
6679 bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
6680 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
6681 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s,
6684 # From: Federico Bianchi <bianchi@www.arte.unipi.it>
6685 # These entries are for the Embeddable Linux Kernel System (ELKS)
6686 # project - an heavily stripped down Linux to be run on 16 bit
6687 # boxes or, eventually, to be used in embedded systems - and have been
6688 # adapted from the stock ELKS termcap. The project itself looks stalled,
6689 # and the latest improvements I know of date back to March 2000.
6691 # To cope with the ELKS dumb console I added an "elks-glasstty" entry;
6692 # as an added bonus, this deals with all the capabilities common to
6693 # both VT52 and ANSI (or, eventually, "special") modes.
6695 elks-glasstty|ELKS glass-TTY capabilities,
6697 cols#80, it#8, lines#25,
6698 bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
6701 elks-vt52|ELKS vt52 console,
6702 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
6703 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
6704 home=\EH, use=elks-glasstty,
6706 elks-ansi|ELKS ANSI console,
6707 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
6708 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6709 rmso=\E[m, smso=\E[7m, use=elks-glasstty,
6711 # As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
6712 # instead of VT52, but the "elks" entry still refers to the latter.
6714 elks|default ELKS console,
6717 # Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
6718 # one but in screen size
6720 sibo|ELKS SIBO console,
6721 cols#61, it#8, lines#20, use=elks-vt52,
6723 ######## COMMERCIAL WORKSTATION CONSOLES
6729 # This is from the OSF/1 Release 1.0 termcap file
6730 pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
6733 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
6734 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
6735 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
6736 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
6737 nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6742 # :is1: resets scrolling region in case a previous user had used "tset vt100"
6743 oldsun|Sun Microsystems Workstation console,
6744 OTbs, am, km, mir, msgr,
6745 cols#80, it#8, lines#34,
6746 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
6747 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6748 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6749 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
6750 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6751 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
6752 rmso=\E[m, sgr0=\E[m, smso=\E[7m,
6753 # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
6754 # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
6755 # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
6756 sun-il|Sun Microsystems console with working insert-line,
6759 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
6760 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
6761 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
6762 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
6763 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6764 kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z,
6765 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
6766 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
6767 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
6768 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
6769 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
6770 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6771 smso=\E[7m, u8=\E[1t, u9=\E[11t,
6772 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
6773 # flake out on the last line. Unfortunately, without them the terminal has no
6775 sun-cgsix|sun-ss5|Sun SparcStation 5 console,
6776 il@, il1@, use=sun-il,
6777 # If you are using an SS5, change the sun definition to use sun-ss5.
6778 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
6781 sun+sl|Sun Workstation window status line,
6783 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
6785 # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
6786 sun-s|Sun Microsystems Workstation window with status line,
6788 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
6789 sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
6791 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
6792 sun-48|Sun 48-line window,
6793 cols#80, lines#48, use=sun,
6794 sun-34|Sun 34-line window,
6795 cols#80, lines#34, use=sun,
6796 sun-24|Sun 24-line window,
6797 cols#80, lines#24, use=sun,
6798 sun-17|Sun 17-line window,
6799 cols#80, lines#17, use=sun,
6800 sun-12|Sun 12-line window,
6801 cols#80, lines#12, use=sun,
6802 sun-1|Sun 1-line window for sysline,
6805 dsl=^L, fsl=\E[K, tsl=\r, use=sun,
6806 sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
6807 ich1@, rmir@, smir@, use=sun,
6808 sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
6810 rmcup=\E[>4h, smcup=\E[>4l, use=sun,
6811 sun-type4|Sun Workstation console with type 4 keyboard,
6812 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
6813 kcuu1=\E[215z, use=sun-il,
6815 # Most of the current references to sun-color are from users wondering why this
6816 # is the default on install. Details from reading the wscons manpage, adding
6817 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
6818 # when those were added -TD (2005-05-28)
6820 # According to wscons manpage, color is supported only on IA systems.
6821 # Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
6822 # does not list these. It also sets ncv#3, however that corresponds to
6823 # underline and standout.
6825 # Since the documentation and terminfo do not agree, see also current code at
6826 # https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
6828 # That (actually a different driver which "supports" sun-color) also supports
6835 # It supports bold, but not underline -TD (2009-09-19)
6836 sun-color|Sun Microsystems Workstation console with color support (IA systems),
6837 colors#8, ncv#3, pairs#64,
6838 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
6839 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
6840 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
6841 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6843 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
6845 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
6846 smso=\E[7m, use=sun,
6851 # (wsiris: this had extension capabilities
6852 # :HS=\E7F2:HE=\E7F7:\
6853 # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
6854 # See the note on Iris extensions near the end of this file.
6855 # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
6856 # <flash> from BRL -- esr)
6857 wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
6858 OTbs, OTnc, OTpt, am,
6859 OTkn#3, cols#80, it#8, lines#40,
6860 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
6861 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
6862 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
6863 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
6864 ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
6865 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
6866 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
6867 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
6872 # Console terminal windows under the NeWS (Sun's Display Postscript windowing
6873 # environment). Note: these have nothing to do with Sony's News workstation
6877 # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
6878 # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
6879 psterm|psterm-basic|NeWS psterm-80x34,
6880 OTbs, am, hs, km, ul,
6881 cols#80, it#8, lines#34,
6882 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
6883 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
6884 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
6885 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
6886 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
6887 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
6888 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
6890 psterm-96x48|NeWS psterm 96x48,
6891 cols#96, lines#48, use=psterm,
6892 psterm-90x28|NeWS psterm 90x28,
6893 cols#90, lines#28, use=psterm,
6894 psterm-80x24|NeWS psterm 80x24,
6895 cols#80, lines#24, use=psterm,
6896 # This is a faster termcap for psterm. Warning: if you use this termcap,
6897 # some control characters you type will do strange things to the screen.
6898 # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
6899 psterm-fast|NeWS psterm fast version (flaky ctrl chars),
6900 OTbs, am, hs, km, ul,
6901 cols#80, it#8, lines#34,
6902 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
6903 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
6904 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
6905 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6906 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
6907 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
6908 smso=^Oo, smul=^Ou, tsl=^Ol,
6912 # Use `glasstty' for the Workspace application
6915 # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
6918 cols#80, it#8, lines#24,
6919 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
6920 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
6921 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
6922 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
6923 nextshell|NeXT Shell application,
6926 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H,
6929 #### Sony NEWS workstations
6932 # (news-unk: this had :KB=news: -- esr)
6933 news-unk|SONY NEWS vt100 emulator common entry,
6934 OTbs, OTpt, am, xenl,
6936 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
6937 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
6938 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
6939 ed=\E[J, el=\E[K, home=\E[H, ht=^I,
6940 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
6941 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
6942 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
6943 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
6944 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
6945 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6946 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
6947 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6949 # (news-29: this had :TY=ascii: --esr)
6951 lines#29, use=news-unk,
6952 # (news-29-euc: this had :TY=euc: --esr)
6955 # (news-29-sjis: this had :TY=sjis: --esr)
6959 # (news-33: this had :TY=ascii: --esr)
6961 lines#33, use=news-unk,
6962 # (news-33-euc: this had :TY=euc: --esr)
6965 # (news-33-sjis: this had :TY=sjis: --esr)
6969 # (news-42: this had :TY=ascii: --esr)
6971 lines#42, use=news-unk,
6972 # (news-42-euc: this had :TY=euc: --esr)
6975 # (news-42-sjis: this had :TY=sjis: --esr)
6979 # NEWS-OS old termcap entry
6981 # (news-old-unk: this had :KB=news:TY=sjis: --esr)
6982 news-old-unk|SONY NEWS vt100 emulator common entry,
6983 OTbs, OTpt, am, xenl,
6985 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
6986 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
6987 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
6988 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
6989 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
6990 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
6991 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
6992 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
6993 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
6995 # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
6996 nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
6999 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
7003 # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
7004 nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
7006 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
7009 # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
7010 nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
7013 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
7017 # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
7018 nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
7021 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
7025 # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
7026 # also the alias vt100-bm.
7027 nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
7030 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
7034 # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
7035 nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
7038 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
7042 # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
7043 news28|sony vt100 emulator 28 lines,
7046 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
7050 # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
7051 news29|news28-a|sony vt100 emulator 29 lines,
7053 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
7057 # (news511: this had :TY=sjis: --esr)
7058 nwp511|nwp-511|nwp-511 vt100,
7059 OTbs, OTpt, am, xenl,
7061 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7062 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
7063 ed=\E[J$<30/>, el=\E[K$<3/>,
7064 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
7065 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
7066 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
7067 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
7068 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
7069 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
7070 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
7071 # (news517: this had :TY=sjis:. --esr)
7072 nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
7075 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7076 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
7077 tsl=\E[1$}\E[;%df, use=vt200,
7078 # (news517-w: this had :TY=sjis:. --esr)
7079 nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
7082 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
7083 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7084 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
7085 tsl=\E[1$}\E[;%df, use=vt200,
7087 #### Common Desktop Environment
7090 # This ships with Sun's CDE in Solaris 2.5
7091 # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
7092 dtterm|CDE desktop terminal,
7093 am, mir, msgr, xenl, xon,
7094 cols#80, it#8, lines#24, lm#0, ncv@,
7095 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7096 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7097 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
7098 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7099 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
7100 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7101 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7102 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7103 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
7104 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
7105 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
7106 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7107 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
7108 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
7109 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
7110 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
7111 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7112 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
7113 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
7114 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
7116 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7117 %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7118 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
7119 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
7121 ######## Non-Unix Consoles
7124 #### EMX termcap.dat compatibility modes
7126 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
7127 # no_color_video to inform the application that standout(1), underline(2)
7128 # reverse(4) and invisible(64) don't work with color.
7129 emx-base|DOS special keys,
7132 bel=^G, use=ansi.sys,
7134 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
7135 # a Unix-style environment used on OS/2. (Note that the suffix makes some
7136 # names longer than 14 characters, the nominal maximum).
7138 # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
7139 ansi-emx|ANSI.SYS color,
7140 am, bce, eo, mir, msgr, xon,
7141 colors#8, cols#80, it#8, lines#25, pairs#64,
7142 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7143 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H,
7144 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7145 dch=\E[%p1%dp, ed=\E[J, el=\E[K,
7146 flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
7147 ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kbs=^H, kf0=\0D,
7148 kll=\0O, kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l,
7149 rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
7150 rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
7151 setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
7152 smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
7153 tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=emx-base,
7154 # nice colors for Emacs (white on blue, mode line white on cyan)
7155 ansi-color-2-emx|ANSI.SYS color 2,
7156 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
7157 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
7158 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
7159 smul=\E[1;36;44m, use=ansi-emx,
7160 # nice colors for Emacs (white on black, mode line black on cyan)
7161 ansi-color-3-emx|ANSI.SYS color 3,
7162 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
7163 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
7164 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
7165 smul=\E[0;36;40m, use=ansi-emx,
7166 mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
7168 cols#80, it#8, lines#24,
7169 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
7170 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
7171 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
7172 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
7173 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
7174 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m,
7179 # Use this for cygwin32 (tested with beta 19.1)
7180 # underline is colored bright magenta
7181 # shifted kf1-kf12 are kf11-kf22
7182 cygwinB19|ansi emulation for cygwin32,
7183 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7184 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7185 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7186 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7187 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7188 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7189 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
7192 # Use this for cygwin (tested with version 1.1.0).
7193 # I've combined pcansi and linux. Some values of course were different and
7194 # I've indicated which of these were and which I used.
7195 # Cheers, earnie_boyd@yahoo.com
7196 # several changes based on running with tack and comparing with older entry -TD
7197 # more changes from csw:
7199 # remove eo [erase overstrike with blank]
7200 # change clear was \E[H\E[J now \E[2J (faster?)
7203 # remove ncv#3 [colors collide with highlights, bitmask] not applicable
7205 # add cub [cursor back param]
7206 # add cuf [cursor forward param]
7207 # add cuu [cursor up param]
7208 # add cud [cursor down param]
7209 # add hs [has status line]
7210 # add fsl [return from status line]
7211 # add tsl [go to status line]
7212 # add smacs [Start alt charset] (not sure if this works)
7213 # add rmacs [End alt charset] (ditto)
7214 # add smcup [enter_ca_mode] (save console; thanks Corinna)
7215 # add rmcup [exit_ca_mode] (restore console; thanks Corinna)
7216 # add kb2 [center of keypad]
7217 # add u8 [user string 8] \E[?6c
7218 # add el [clear to end of line] \E[K
7220 # cnorm [make cursor normal] not implemented
7221 # flash [flash] not implemented
7222 # blink [blink] not implemented very usefully in cygwin? \E[5m
7223 # dim [dim] not implemented very usefully in cygwin? \E[2m
7224 # cub1 [cursor back 1] typically \E[D, but ^H is faster?
7225 # kNXT [shifted next key] not implemented
7226 # kPRV [shifted prev key] not implemented
7227 # khome [home key] really is \E[1~ NOT \E[H
7228 # tbc [clear tab stops] not implemented
7229 # xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
7230 # smpch [Start PC charset] is \E[11m, same as smacs
7231 # rmpch [End PC charset] is \E[10m, same as rmacs
7232 # mir [move in insert mode] fails in tack?
7233 # bce [back color erase] causes problems with change background color?
7234 # cvvis [make cursor very visible] causes a stackdump when testing with
7235 # testcurs using the output option? \E[?25h\E[?8c
7236 # civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
7237 # ech [erase characters param] broken \E[%p1%dX
7238 # kcbt [back-tab key] not implemented in cygwin? \E[Z
7241 # Remove cbt since it does not work in current cygwin
7242 # Add 'mir' and 'in' flags based on tack
7243 cygwin|ansi emulation for Cygwin,
7244 am, hs, mir, msgr, xon,
7245 colors#8, it#8, pairs#64,
7246 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7247 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7248 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7249 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD,
7250 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7251 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7252 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7253 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
7254 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
7255 il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G,
7256 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7257 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
7258 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
7259 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
7260 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
7261 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7262 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
7263 nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
7264 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
7265 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
7266 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7267 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
7268 %t;8%;%?%p9%t;11%;m,
7269 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
7270 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
7271 vpa=\E[%i%p1%dd, use=vt102+enq,
7273 # I've supplied this so that you can help test new values and add other
7274 # features. Cheers, earnie_boyd@yahoo.com.
7276 # Some features are from pcansi. The op value is from linux. Function-keys
7277 # are from linux. These have been tested not to cause problems. xenl was in
7278 # this list, but DOES cause problems so it has been removed
7279 cygwinDBG|Debug Version for Cygwin,
7280 am, eo, mir, msgr, xon,
7281 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
7282 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7283 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7284 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7285 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
7286 cnorm=\E[?25h, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
7287 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7288 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7289 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7290 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7291 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
7292 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7293 il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
7294 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
7295 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
7296 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
7297 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
7298 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
7299 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7300 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7301 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n, op=\E[39;49m,
7302 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
7303 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
7304 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7305 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
7306 %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
7307 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
7308 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
7313 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
7314 # encodings used by other x86 environments. All others are invented for DJGPP.
7315 # Oddly enough, while several combinations of modifiers are tabulated, there is
7316 # none for shifted cursor keys.
7368 # Ctrl-Delete \E[43~
7369 # Ctrl-Down Arrow \E[38~
7372 # Ctrl-Insert \E[42~
7373 # Ctrl-Left Arrow \E[39~
7374 # Ctrl-Page Down \E[46~
7375 # Ctrl-Page Up \E[45~
7376 # Ctrl-Right Arrow \E[40~
7377 # Ctrl-Up Arrow \E[37~
7393 # Alt-Down Arrow \E[60~
7397 # Alt-Left Arrow \E[61~
7398 # Alt-Page Down \E[68~
7399 # Alt-Page Up \E[67~
7400 # Alt-Right Arrow \E[62~
7401 # Alt-Up Arrow \E[59~
7430 djgpp|ansi emulation for DJGPP alpha,
7431 am, bce, msgr, xhp, xon, xt,
7432 colors#8, it#8, pairs#64,
7433 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7434 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7435 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7436 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7437 clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H,
7438 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7439 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7440 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7441 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
7442 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
7443 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7444 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
7445 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
7446 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
7447 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
7448 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
7449 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=\r\n,
7450 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
7451 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
7452 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
7453 %p6%t;1%;%?%p7%t;8%;m,
7454 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
7456 djgpp203|Entry for DJGPP 2.03,
7458 cols#80, it#8, lines#25,
7459 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
7462 djgpp204|Entry for DJGPP 2.04,
7464 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
7465 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
7466 clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD,
7467 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7468 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7469 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
7470 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
7471 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7472 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
7473 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7474 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
7475 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
7476 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
7477 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=\r\n, rev=\E[7m,
7478 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
7479 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
7483 # This is tested using U/Win's telnet. Scrolling is omitted because it is
7484 # buggy. Another odd bug appears when displaying "~" in alternate character
7485 # set (the emulator spits out error messages). Compare with att6386 -TD
7486 uwin|U/Win 3.2 console,
7487 am, eo, in, msgr, xenl, xon,
7488 colors#8, it#8, ncv#58, pairs#64,
7489 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
7490 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
7491 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
7492 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7493 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
7494 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7495 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
7496 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
7497 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
7498 kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y, kf1=\EOP,
7499 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
7500 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
7501 khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m, rc=\E8,
7502 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
7503 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
7504 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
7505 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
7506 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
7508 #### Microsoft (miscellaneous)
7510 # This entry fits the Windows NT console when the _POSIX_TERM environment
7511 # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
7512 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
7513 # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
7514 # systems is not, and (surprise!) they match very well.
7516 # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
7517 # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
7518 # are the installation instructions a pile of mind-numbing bureaucratese,
7519 # but the termcap entry is actually broken and unusable as given; the :do:
7520 # capability is misspelled "d".
7522 # To use this, you need to a bunch of environment variables:
7524 # SET _POSIX_TERM=on
7526 # SET TERMCAP=location of termcap file in POSIX file format
7527 # which is case-sensitive.
7528 # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
7531 # Important note: setting the TMP environment variable in POSIX style renders
7532 # it incompatible with a lot of other applications, including Visual C++. So
7533 # you should have a separate command window just for vi. All the other
7534 # variables may be permanently set in the Control Panel\System applet.
7536 # You can find out more about the restrictions of this facility at
7537 # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
7539 # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
7540 ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
7542 cols#80, it#8, lines#25,
7543 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
7544 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
7545 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
7546 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
7547 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
7548 # From: jew@venus.sunquest.com
7549 # Date: 19 Feb 93 23:41:07 GMT
7550 # Here's a combination of ansi and vt100 termcap
7551 # entries that works nearly perfectly for me
7552 # (Gateway 2000 Handbook and Microsoft Works 3.0):
7553 pcmw|PC running Microsoft Works,
7555 cols#80, it#8, lines#24, vt#3,
7556 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
7557 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
7558 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
7559 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
7560 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
7561 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7562 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
7563 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
7564 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
7565 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
7566 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
7569 # From: Federico Bianchi
7570 # This is the entry for the OpenNT terminal.
7571 # The ntconsole name is for backward compatibility.
7572 # This is for OpenNT 2.0 and later.
7573 # Later OpenNT was renamed to Interix.
7575 # Presently it is distributed by Microsoft as Services For Unix (SFU).
7576 # The 3.5 beta contains ncurses 4.2 (that is header files and executables,
7577 # the documentation dates from 1.9.9e) -TD
7579 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
7581 colors#8, cols#80, lines#25, ncv#3, pairs#64,
7582 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
7583 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
7584 \301w\302x\263y\363z\362{\343|\330}\234~\376,
7585 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
7586 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
7587 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7588 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
7589 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7590 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
7591 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
7592 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
7593 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
7594 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
7595 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
7596 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
7597 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
7598 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
7599 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
7600 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
7601 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
7602 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
7603 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-, kf63=\EF^L,
7604 kf7=\EF7, kf8=\EF8, kf9=\EF9, kich1=\E[L, kll=\E[U, knp=\E[T,
7605 kpp=\E[S, ll=\E[U, nel=\r\n, op=\E[m, rc=\E[u, rev=\E[7m,
7606 ri=\E[T, rin=\E[%p1%dT, rmcup=\E[2b\E[u\r\E[K, rmso=\E[m,
7607 rmul=\E[m, rs1=\Ec, sc=\E[s, setab=\E[4%p1%dm,
7608 setaf=\E[3%p1%dm, setb=\E[%p1%{40}%+%dm,
7609 setf=\E[%p1%{30}%+%dm, sgr0=\E[0m, smcup=\E[s\E[1b,
7610 smso=\E[7m, smul=\E[4m, kf64=\EF$,
7612 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
7613 lines#35, use=opennt,
7615 opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
7616 lines#50, use=opennt,
7618 opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
7619 lines#60, use=opennt,
7621 opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
7622 lines#100, use=opennt,
7624 # OpenNT wide terminals
7625 opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
7626 cols#125, use=opennt,
7628 opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
7629 lines#35, use=opennt-w,
7631 opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
7632 lines#50, use=opennt-w,
7634 opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
7635 lines#60, use=opennt-w,
7637 opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
7638 cols#132, use=opennt,
7640 # OpenNT terminals with no smcup/rmcup (names match termcap entries)
7641 interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
7642 rmcup@, smcup@, use=opennt,
7644 opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
7645 lines#35, use=opennt-nti,
7647 opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
7648 lines#50, use=opennt-nti,
7650 opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
7651 lines#60, use=opennt-nti,
7653 opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
7654 lines#100, use=opennt-nti,
7656 ######## COMMON TERMINAL TYPES
7658 # This section describes terminal classes and maker brands that are still
7659 # quite common, but have proprietary command sets not blessed by ANSI.
7664 # Altos made a moderately successful line of UNIX boxes. In 1990 they were
7665 # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
7666 # Acer has a web site at http://www.acer.com.
7668 # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
7669 # His comments suggest they were shipped with the system.
7672 # (altos2: had extension capabilities
7673 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7674 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7675 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7676 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7677 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7678 # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
7679 # :HL=^AP\r:SP=\E[i:\
7680 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
7681 # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
7682 # Comparison with the k* capabilities makes it obvious that the c* things are
7683 # shift keys. I have renamed them to keys 32 and up accordingly. Also,
7684 # :sr: was given as a boolean-- esr)
7685 altos2|alt2|altos-2|altos II,
7686 cols#80, it#8, lines#24, xmc#0,
7687 clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
7688 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
7689 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
7690 if=/usr/share/tabset/vt100, il1=\E[L, ind=\n,
7691 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
7692 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
7693 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
7694 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7695 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7696 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7697 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7698 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
7699 nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
7700 smam=\E[?7h, smso=\E[7m, smul=\E[4m,
7701 # (altos3: had extension capabilities
7702 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7703 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7704 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7705 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7706 # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
7707 # :HL=^AP\r:SP=\E[i:\
7708 # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
7709 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
7710 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
7711 altos4|alt4|altos-4|altos IV,
7713 # (altos7: had extension capabilities:
7714 # :GG#0:GI=\EH8:GF=\EH7:\
7715 # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
7716 # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
7717 # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
7718 # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
7719 # Comparison with the k* capabilities makes it obvious that the c* things are
7720 # shift keys. I have renamed them to keys 32 and up accordingly. I have
7721 # also made this entry relative to adm12 in order to give it an <sgr>. The
7722 # <invis> imported by use=adm+sgr may work, let me know. -- esr)
7723 altos7|alt7|altos VII,
7725 cols#80, lines#24, xmc#0,
7726 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
7727 clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
7728 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
7729 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
7731 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
7732 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
7733 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
7734 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
7735 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
7736 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
7737 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
7738 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
7739 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
7740 rmir=\Er, smir=\Eq, use=adm+sgr,
7741 altos7pc|alt7pc|altos PC VII,
7742 kend=\ET, use=altos7,
7744 #### Hewlett-Packard (hp)
7747 # 8000 Foothills Blvd
7748 # Roseville, CA 95747
7749 # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
7750 # 1-(800)-633-3600 (General customer support)
7753 # As of March 1998, HP no longer has any terminals in production.
7754 # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
7755 # supported (they still have parts). So are the 2392a and 2394a.
7756 # See the WORKSTATION CONSOLES section for the 700s.
7759 # Generic HP terminal - this should (hopefully) work on any HP terminal.
7760 hpgeneric|hp|hewlett-packard generic terminal,
7761 OTbs, OTpt, am, da, db, mir, xhp,
7762 cols#80, lines#24, lm#0, vt#6,
7763 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
7764 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
7765 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
7766 ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
7767 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
7770 hp110|hewlett-packard model 110 portable,
7771 lines#16, use=hpgeneric,
7773 hp+pfk+cr|hp function keys with CR,
7774 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
7775 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
7777 hp+pfk-cr|hp function keys w/o CR,
7778 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
7781 # The hp2621s use the same keys for the arrows and function keys,
7782 # but not separate escape sequences. These definitions allow the
7783 # user to use those keys as arrow keys rather than as function
7785 hp+pfk+arrows|hp alternate arrow definitions,
7786 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
7787 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
7788 kll=\Eq\r, kri=\Es\r,
7790 hp+arrows|hp arrow definitions,
7791 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
7792 kind=\ES, kll=\EF, kri=\ET,
7794 # Generic stuff from the HP 262x series
7796 hp262x|HP 262x terminals,
7798 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
7799 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
7800 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
7801 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
7802 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
7803 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
7804 %;%?%p4%t%{65}%|%;%c,
7805 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
7807 # Note: no <home> on HPs since that homes to top of memory, not screen.
7808 # Due to severe 2621 braindamage, the only way to get the arrow keys to
7809 # transmit anything at all is to turn on the function key labels
7810 # with <smkx>, and even then the user has to hold down shift!
7811 # The default 2621 turns off the labels except when it has to to
7812 # enable the function keys. If your installation prefers labels
7813 # on all the time, or off all the time (at the "expense" of the
7814 # function keys), use 2621-nl or 2621-wl.
7816 # Note: there are newer ROMs for 2621's that allow you to set
7817 # strap A so the regular arrow keys xmit \EA, etc, as with the
7818 # 2645. However, even with this strap set, the terminal stops
7819 # xmitting if you reset it, until you unset and reset the strap!
7820 # Since there is no way to set/unset the strap with an escape
7821 # sequence, we don't use it in the default.
7822 # If you like, you can use 2621-ba (brain-damaged arrow keys).
7823 hp2621-ba|2621 w/new rom and strap A set,
7824 rmkx@, smkx@, use=hp+arrows, use=hp2621,
7826 # hp2621 with function labels. Most of the time they are off,
7827 # but inside vi, the function key labels appear. You have to
7828 # hold down shift to get them to xmit.
7829 hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
7830 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
7834 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
7835 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
7836 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
7837 use=hp+pfk+cr, use=hpgeneric,
7839 # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
7840 hp2621p|hp 2621 with printer,
7841 mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
7843 hp2621p-a|hp2621p with fn as arrows,
7844 use=hp+pfk+arrows, use=hp2621p,
7846 # hp2621 with k45 keyboard
7847 hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
7848 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
7849 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
7851 # 2621 using all 48 lines of memory, only 24 visible at any time.
7852 hp2621-48|48 line 2621,
7854 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
7857 # 2621 with no labels ever. Also prevents vi delays on escape.
7858 hp2621-nl|hp 2621 with no labels,
7859 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
7862 # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
7865 hp2621-nt|hp 2621 w/no tabs,
7868 # Hp 2624 B with 4 or 10 pages of memory.
7870 # Some assumptions are made with this entry. These settings are
7871 # NOT set up by the initialization strings.
7873 # Port Configuration
7878 # Terminal Configuration
7884 # Note: the 2624 DOES have a true <home>, believe it or not!
7886 # The 2624 has an "error line" to which messages can be sent.
7887 # This is CLOSE to what is expected for a "status line". However,
7888 # after a message is sent to the "error line", the next carriage
7889 # return is EATEN and the "error line" is turned back off again!
7890 # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
7892 # This entry supports emacs (and any other program that uses raw
7893 # mode) at 4800 baud and less. I couldn't get the padding right
7896 # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
7897 hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
7900 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
7902 # This hp2626 entry does not use any of the fancy windowing stuff
7905 # Indeed, terminfo does not yet handle such stuff. Since changing
7906 # any window clears memory, it is probably not possible to use
7907 # this for screen opt.
7909 # ed is incredibly slow most of the time - I am guessing at the
7910 # exact padding. Since the terminal uses xoff/xon this is intended
7911 # only for cost computation, so that the terminal will prefer el
7912 # or even dl1 which is probably faster!
7914 # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
7915 # extra slow on the last line of the window.
7917 # The padding probably should be changed.
7919 hp2626|hp2626a|hp2626p|hp 2626,
7922 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
7923 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
7924 use=hp+labels, use=scrhp,
7926 # This entry is for sysline. It allocates a 23 line window with
7927 # a 115 line workspace for regular use, and a 1 line window for
7930 # This assumes port 2 is being used.
7931 # Turn off horizontal line, Create ws #1 with 115 lines,
7932 # Create ws #2 with 1 line, Create window #1 lines 1-23,
7933 # Create window #2 lines 24-24, Attach cursor to workspace #1.
7934 # Note that this clears the tabs so it must be done by tset before
7937 hp2626-s|hp 2626 using only 23 lines,
7940 fsl=\E&d@\E&w7f2p1I\E&w4f1I,
7941 is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
7942 \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
7943 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
7944 # Force terminal back to 24 lines after being 23.
7945 hp2626-ns|hp 2626 using all 24 lines,
7946 is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
7947 \s\E&w3f2I\s\E&w7f2p1I\s\r,
7949 # Various entries useful for small windows on 2626.
7950 hp2626-12|hewlett-packard 2626 12 lines,
7951 lines#12, use=hp2626,
7952 hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
7953 cols#40, lines#12, use=hp2626,
7954 hp2626-x40|hewlett-packard 2626 40 columns,
7955 cols#40, use=hp2626,
7956 hp2626-12-s|hewlett-packard 2626 11 lines plus status,
7957 lines#11, use=hp2626-s,
7960 # hp2627 color tubes from University of Wisconsin
7962 hp2627a-rev|hp 2627 with reverse video colors,
7963 cr=\r, cud1=\n, ht=^I, ind=\n,
7964 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
7966 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
7967 smul=\E&dD\E&v1S, use=hp2621-nl,
7968 hp2627a|hp 2627 color terminal with no labels,
7969 cr=\r, cud1=\n, ht=^I, ind=\n,
7970 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
7971 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
7972 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
7974 hp2627c|hp 2627 color (cyan) terminal with no labels,
7975 cr=\r, cud1=\n, ht=^I, ind=\n,
7976 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
7977 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a,
7979 # hp2640a doesn't have the Y cursor addressing feature, and C is
7980 # memory relative instead of screen relative, as we need.
7983 cup@, rmkx@, smkx@, use=hp2645,
7985 hp2640b|hp2644a|hp 264x series,
7986 rmkx@, smkx@, use=hp2645,
7988 # (hp2641a: removed unknown :gu: -- esr)
7989 hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
7990 am, da, db, mir, xhp,
7992 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
7993 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
7994 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
7995 if=/usr/share/tabset/std, il1=\EL, ind=\n,
7996 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
7997 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
8000 # This terminal should be used at 4800 baud or less. It needs padding for
8001 # plain characters at 9600, I guessed at an appropriate cr delay. It really
8002 # wants ^E/^F handshaking, but that doesn't work well even if you write
8003 # software to support it.
8004 hp2645|hp45|HP 2645 series,
8006 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
8007 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8008 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
8009 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
8011 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
8012 %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
8013 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
8014 # You should use this terminal at 4800 baud or less.
8015 hp2648|hp2648a|HP 2648a graphics terminal,
8016 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
8017 dch1=\EP$<7>, ip=$<5>, use=hp2645,
8019 # The HP 150 terminal is a fairly vanilla HP terminal, with the
8020 # clreol standout problem. It also has graphics capabilities and
8021 # a touch screen, which we don't describe here.
8022 hp150|hewlett packard Model 150,
8025 # HP 2382a terminals, "the little ones." They don't have any
8026 # alternate character set support and sending out ^N/^O will
8027 # leave the screen blank.
8028 hp2382a|hp2382|hewlett packard 2382a,
8032 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8035 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8036 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8037 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8039 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
8041 hp2621-a|hp2621a-a|hp2621 with fn as arrows,
8042 use=hp+pfk+arrows, use=hp2621-fl,
8044 # newer hewlett packard terminals
8046 newhpkeyboard|generic entry for HP extended keyboard,
8047 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8048 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
8049 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
8050 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
8053 newhp|generic entry for new hewlett packard terminals,
8054 am, bw, mir, xhp, xon,
8055 cols#80, lines#24, pb#4800,
8056 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRm
8058 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H,
8059 cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
8060 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n,
8061 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n,
8062 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
8063 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
8064 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
8065 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
8066 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
8067 %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
8068 %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
8069 %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
8070 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
8071 tbc=\E3, use=newhpkeyboard,
8073 memhp|memory relative addressing for new HP ttys,
8075 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
8076 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
8077 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
8078 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
8080 scrhp|screen relative addressing for new HP ttys,
8081 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
8082 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
8083 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
8084 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
8085 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
8087 # (hp+labels: added label values from a BRL termcap -- esr)
8088 hp+labels|"standard" label info for new HP ttys,
8090 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
8091 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
8093 rmln=\E&j@, smln=\E&jB,
8095 hp+printer|"standard" printer info for HP ttys,
8096 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
8099 # The new hp2621b is kind of a cross between the old 2621 and the
8100 # new 262x series of machines. It has dip-switched options.
8101 # The firmware has a bug in it such that if you give it a null
8102 # length label, the following character is eaten!
8103 hp2621b|hp 2621b with old style keyboard,
8104 lh#1, lm#48, lw#8, nlab#8,
8105 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8106 kind=\ET, kll=\EF, kri=\ES,
8107 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
8108 %;%p2%s\E%{111}%p1%+%c\r,
8109 smln=\E&jB, use=hp2621,
8111 hp2621b-p|hp 2621b with printer,
8112 use=hp+printer, use=hp2621b,
8114 # hp2621b - new 2621b with new extended keyboard
8115 # these are closer to the new 26xx series than the other 2621b
8116 hp2621b-kx|hp 2621b with extended keyboard,
8117 use=newhpkeyboard, use=hp2621b,
8119 hp2621b-kx-p|hp 2621b with new keyboard & printer,
8120 use=hp+printer, use=hp2621b-kx,
8122 # Some assumptions are made in the following entries.
8123 # These settings are NOT set up by the initialization strings.
8125 # Port Configuration
8126 # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
8128 # Terminal Configuration
8129 # InhHndShk(G)=Yes InhDC2(H)=Yes
8130 # XmitFnctn(A)=No InhEolWrp=No
8133 # Hp 2622a & hp2623a display and graphics terminals
8135 hp2622|hp2622a|hp 2622,
8138 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
8140 # The 2623 is a 2622 with extra graphics hardware.
8141 hp2623|hp2623a|hp 2623,
8144 hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
8145 use=hp+printer, use=hp2624,
8147 # The hewlett packard B can have an optional extra 6 pages of memory.
8148 hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
8151 hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
8152 lm#240, use=hp2624b-p,
8154 # Color manipulations for HP terminals
8155 hp+color|hp with colors,
8157 colors#16, ncv#17, pairs#7,
8158 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
8159 %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
8160 %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
8161 %t1%e.%p7%d%;z%p1%dI,
8162 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
8163 I\E&v1b1c6I\E&v1x1y7I,
8164 op=\E&v0S, scp=\E&v%p1%dS,
8166 # <is2> sets the screen to be 80 columns wide
8167 hp2397a|hp2397|hewlett packard 2397A color terminal,
8168 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
8170 # HP 700/44 Setup parameters:
8171 # Terminal Mode HP-PCterm
8172 # Inhibit Auto Wrap NO
8173 # Status Line Host Writable
8174 # PC Character Set YES
8175 # Twenty-Five Line Mode YES
8176 # XON/XOFF @128 or 64 (sc)
8177 # Keycode Mode NO or YES (sc)
8178 # Backspace Key BS or BS/DEL
8180 # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
8181 # \E\\? does not turn off keycode mode
8182 # <smsc> sets alternate start/stop; keycode on
8183 hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
8186 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
8188 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
8189 cnorm=\E[?25h, cr=\r, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
8190 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
8191 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
8193 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
8194 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8195 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
8196 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
8197 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
8198 kpp=\E[5~, rmam=\E[?7l,
8199 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
8200 rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
8201 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
8202 smul=\E[4m, xoffc=g, xonc=e,
8204 # (hp2392: copied <rmir> here from hpex -- esr)
8207 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
8208 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
8209 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
8210 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
8213 hpsub|hp terminals -- capability subset,
8214 am, da, db, mir, xhp, xon,
8216 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
8217 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
8218 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n,
8219 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
8220 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
8221 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
8224 # May be used for most 24 x 80 hp terminals,
8225 # but has no padding added, so may allow runover in some terminals at high
8226 # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
8227 # hp98x5 terminal emulators or hp98x6 consoles.
8228 # Adds xy-cursor addressing, vertical cursor addressing, home,
8229 # last line, and underline capabilities.
8231 # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
8232 # moved <rmir> here from hpsub -- esr)
8233 hpex|hp extended capabilities,
8234 cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H,
8235 kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ,
8236 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
8238 # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
8239 hp2|hpex2|hewlett-packard extended capabilities newer version,
8240 am, da, db, mir, xhp,
8241 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
8242 bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
8243 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8244 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8245 il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
8246 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8247 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
8248 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
8249 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
8250 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
8251 pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
8252 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
8253 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
8254 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
8255 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
8256 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
8257 %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
8258 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
8259 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8262 # From: <ddavis@ic.berkeley.edu>
8263 hp236|hp236 internal terminal emulator,
8266 clear=\EF, cnorm=\EDE, cub1=^H,
8267 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
8268 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
8269 sgr0=\ECI, smso=\EBI,
8271 # This works on a hp300 console running Utah 4.3 BSD
8272 # From: Craig Leres <leres@okeeffe.berkeley.edu>
8273 hp300h|HP Catseye console,
8274 OTbs, am, da, db, mir, xhp,
8275 cols#128, lines#51, lm#0, xmc#0,
8276 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
8277 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8278 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
8279 if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H,
8280 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
8281 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
8282 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
8284 # From: Greg Couch <gregc@ernie.berkeley.edu>
8285 hp9837|hp98720|hp98721|HP 9000/300 workstations,
8286 OTbs, am, da, db, mir, xhp,
8287 cols#128, it#8, lines#46, lm#0,
8288 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
8289 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
8290 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8291 il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
8292 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8293 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
8294 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
8295 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
8296 tbc=\E3, vpa=\E&a%p1%dY,
8297 # HP 9845 desktop computer from BRL
8298 # (hp9845: removed unknown capability :gu: -- esr)
8300 OTbs, am, da, db, eo, mir, xhp,
8302 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
8303 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
8304 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
8305 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
8306 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
8307 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
8308 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
8309 hp98550|hp98550a|HP 9000 Series 300 color console,
8310 OTbs, am, da, db, mir, xhp,
8311 cols#128, it#8, lines#49, lm#0,
8312 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
8313 clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
8314 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
8315 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
8316 if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
8317 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
8318 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
8319 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
8320 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
8321 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
8322 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
8323 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
8324 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8325 # From: Victor Duchovni <vic@fine.princeton.edu>
8326 # (hp700-wy: removed obsolete ":nl=^J:";
8327 # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
8328 hp700-wy|HP700/41 emulating wyse30,
8329 OTbs, am, bw, mir, msgr,
8330 cols#80, it#8, lines#24, xmc#1,
8331 cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
8332 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8333 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
8334 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
8335 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI,
8336 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
8337 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
8338 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
8339 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
8340 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
8341 hp70092|hp70092a|hp70092A|HP 700/92,
8343 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
8344 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
8345 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
8346 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
8347 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
8348 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
8349 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
8350 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
8351 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
8352 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
8353 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
8354 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
8355 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
8356 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
8358 bobcat|sbobcat|HP 9000 model 300 console,
8359 am, da, db, mir, xhp,
8360 cols#128, it#8, lines#47, xmc#0,
8361 cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
8362 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
8363 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
8364 il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
8365 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER,
8366 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
8367 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
8368 gator-t|HP 9000 model 237 emulating extra-tall AAA,
8369 lines#94, use=gator,
8370 gator|HP 9000 model 237 emulating AAA,
8372 cols#128, it#8, lines#47,
8373 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
8374 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
8375 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
8376 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
8377 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
8378 il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
8379 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
8380 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
8381 gator-52|HP 9000 model 237 emulating VT52,
8382 cols#128, lines#47, use=vt52,
8383 gator-52t|HP 9000 model 237 emulating extra-tall VT52,
8384 lines#94, use=gator-52,
8388 # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
8391 # Honeywell Bull terminal. Its cursor and function keys send single
8392 # control characters and it has standout/underline glitch. Most programs
8393 # do not like these features/bugs. Visual bell is realized by flashing the
8394 # "keyboard locked" LED.
8395 dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
8397 clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X,
8398 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
8399 flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y,
8400 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n,
8401 dku7003|Honeywell Bull DKU 7003 all features described,
8404 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
8405 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
8408 #### Lear-Siegler (adm)
8410 # These guys are long since out of the terminals business, but
8411 # in 1995 many current terminals still have an adm type as one of their
8412 # emulations (usually their stupidest, and usually labeled adm3, though
8413 # these `adm3' emulations normally have adm3a+ capabilities).
8415 # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
8416 # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
8417 # was being held to ground would trigger a send of the top line on the screen.
8418 # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
8419 # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
8420 # for clearing up this point.)
8422 adm1a|adm1|lsi adm1a,
8425 bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8426 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
8431 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8432 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8433 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
8434 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
8435 # (adm3: removed obsolete ":ma=^K^P:" -- esr)
8439 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
8440 # The following ADM-3A switch settings are assumed for normal operation:
8441 # SPACE U/L_DISP CLR_SCRN 24_LINE
8442 # CUR_CTL LC_EN AUTO_NL FDX
8443 # Other switches may be set for operator convenience or communication
8444 # requirements. I recommend
8445 # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
8447 # Most of these terminals required an option ROM to support lower case display.
8448 # Open the case and look at the motherboard; if you see an open 24-pin DIP
8449 # socket, you may be out of luck.
8451 # (adm3a: some capabilities merged in from BRl entry -- esr)
8455 OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
8456 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8457 cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L,
8461 # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
8464 bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^,
8465 rmso=\EG, smso=\EG, use=adm3a+,
8466 # A lot of terminals other than adm11s use these. Wherever you see
8467 # use=adm+sgr with some of its capabilities disabled, try the
8468 # disabled ones. They may well work but not have been documented or
8469 # expressed in the using entry. We'd like to cook up an <sgr> but the
8470 # <rmacs>/<smacs> sequences of the using entries vary too much.
8471 adm+sgr|adm style highlight capabilities,
8472 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
8473 smso=\EG4, smul=\EG8,
8474 # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
8475 # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
8476 # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
8477 # be ^Z, according to his entry.
8478 # (adm11: <smul>=\EG4 was obviously erroneous because it also said
8479 # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
8482 OTkn#8, cols#80, lines#24,
8483 OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H,
8484 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8485 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
8486 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
8487 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8488 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E),
8490 # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
8491 # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
8492 # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
8493 # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
8494 # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
8495 # via BRL. That entry asserted <xmc#1>, but I've left that out because
8496 # neither earlier nor later ADMSs have it -- esr)
8498 # You will need to get into the supervisor setup before you can set
8499 # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
8500 # see a lot more setup options.
8502 # While in supervisor setup you can also use following codes:
8504 # Ctrl-P Personality character selections (configure for example what
8505 # arrow keys send, if I recall correctly)
8506 # Ctrl-T tabs 1-80 use left&right to move and up to set and
8507 # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
8508 # Ctrl-B Binary setup (probably not needed. I think that everything can
8509 # be set using normal setup)
8510 # Ctrl-A Answerback mode (enter answerback message)
8511 # Ctrl-U User friendly mode (normal setup)
8512 # Ctrl-D Defaults entire setup and function keys from EPROM tables
8513 # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
8514 # Ctrl-R Reads both setup and functions keys from NVM.
8515 # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
8517 # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
8518 # RTS/CTS used nowadays with virtually every modem and computer. 19200
8519 # bps works fine with hardware flow control.
8521 # The following null-modem cable should fix this and enable you to use
8522 # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
8523 # set ADM-12+ for DTR handshaking from supervisor setup.
8536 OTbs, OTpt, am, mir,
8537 OTug#1, cols#80, it#8, lines#24,
8538 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8539 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8540 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
8541 is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
8542 \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
8543 \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
8544 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8545 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8546 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
8548 # (adm20: removed obsolete ":kn#7:" -- esr)
8549 adm20|lear siegler adm20,
8551 cols#80, it#8, lines#24,
8552 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
8553 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
8554 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
8555 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
8557 adm21|lear siegler adm21,
8559 bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
8560 el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H,
8561 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
8562 use=adm+sgr, use=adm3a,
8563 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
8564 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
8565 # removed bogus-looking \200 from before <cup>. -- esr)
8569 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8570 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8571 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
8572 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
8574 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
8575 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
8576 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
8577 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
8578 # ADM 31 DIP Switches
8580 # This information comes from two versions of the manual for the
8581 # Lear-Siegler ADM 31.
8585 # +-||||-------------------------------------+
8600 # +----------------------------------------------+
8601 # front of case (keyboard)
8603 # S1 - Data Rate - Modem
8604 # S2 - Data Rate - Printer
8605 # ------------------------
8607 # -------------------
8625 # S3 - Interface/Printer/Attributes
8626 # ---------------------------------
8627 # Printer Busy Control
8630 # off off off Busy not active, CD disabled
8631 # off off on Busy not active, CD enabled
8632 # off on off Busy active on J5-20, CD disabled
8633 # on off off Busy active on J5-19, CD disabled - Factory Set.
8634 # on off on Busy active on J5-19, CD enabled
8636 # sw4 Used in conjunction with S4 for comm interface control - Fact 0
8638 # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
8640 # sw6 ON enables printer BUSY active LOW - Factory Setting
8641 # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
8643 # sw7 ON - steady cursor - Factory Setting
8644 # OFF - blinking cursor
8646 # sw8 ON causes selected attribute character to be displayed
8647 # OFF causes SPACE to be displayed instead - Factory Setting
8653 # sw4 sw1 sw2 sw3 sw4
8654 # ---------------------------
8655 # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
8656 # Current Loop disabled - Factory Setting
8657 # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
8659 # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
8660 # Current Loop Disabled
8662 # sw5 ON disables dot stretching mode - Factory Setting
8663 # OFF enables dot stretching mode
8664 # sw6 ON enables blanking function
8665 # OFF enables underline function - Factory Setting
8666 # sw7 ON causes NULLS to be displayed as NULLS
8667 # OFF causes NULLS to be displayed as SPACES - Factory Setting
8669 # S5 - Word Structure
8670 # -------------------
8671 # sw1 ON enables BREAK key - Factory Setting
8672 # OFF disables BREAK key
8673 # sw2 ON selects 50Hz monitor refresh rate
8674 # OFF selects 60Hz monitor refresh rate - Factory Setting
8676 # Modem Port Selection
8679 # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
8680 # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
8681 # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
8682 # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
8683 # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
8684 # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
8685 # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
8686 # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
8688 # sw6 ON sends bit 8 a 1 (mark)
8689 # OFF sends bit 8 as 0 (space) - Factory Setting
8690 # sw7 ON selects Block Mode
8691 # OFF selects Conversation Mode - Factory Setting
8692 # sw8 ON selects Full Duplex operation
8693 # OFF selects Half Duplex operation - Factory Setting
8697 # sw1, sw2, sw6, sw7 Reserved - Factory 0
8699 # Printer Port Selection
8700 # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
8702 # sw8 ON enables Printer Port
8703 # OFF disables Printer Port - Factory Setting
8705 # S7 - Polling Address
8706 # --------------------
8707 # sw1-7 Establish ASCII character which designates terminal polling address
8709 # OFF = logic 1 - Factory Setting
8710 # sw8 ON enables Polling Option
8711 # OFF disables Polling Option - Factory Setting
8714 # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
8716 # This adm31 entry uses underline as the standout mode.
8717 # If the adm31 gives you trouble with standout mode, check the DIP switch in
8718 # position 6, bank @c11, 25% from back end of the circuit board. Should be
8719 # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
8720 # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
8721 adm31|lsi adm31 with sw6 set for underline mode,
8724 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8725 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8726 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0,
8727 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8728 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8729 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
8730 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
8731 adm31-old|o31|old adm31,
8732 rmul@, smso=\EG4, smul@, use=adm31,
8733 # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
8737 if=/usr/share/tabset/vt100,
8738 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
8739 # (adm42: removed obsolete ":ma=^K^P:" -- esr)
8743 bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
8744 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8745 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
8746 il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n,
8747 kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@,
8748 smir=\Eq, smul@, use=adm+sgr,
8749 # The following termcap for the Lear Siegler ADM-42 leaves the
8750 # "system line" at the bottom of the screen blank (for those who
8751 # find it distracting otherwise)
8752 adm42-ns|lsi adm-42 with no system line,
8753 cbt=\EI\EF \011, clear=\E;\EF \011,
8754 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
8755 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
8756 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
8757 smir=\Eq\EF \011, use=adm42,
8758 # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
8759 # The insert mode of this terminal is commented out because it's broken for our
8760 # purposes in that it will shift the position of every character on the page,
8761 # not just the cursor line!
8762 # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
8763 adm1178|1178|lsi adm1178,
8765 cols#80, lines#24, xmc#1,
8766 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
8767 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8768 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
8769 home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H,
8770 kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0,
8771 sgr0=\E), smso=\EG4, smul=\EG1,
8775 # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
8776 # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
8777 # Prime merged with ComputerVision in the late 1980s; you can reach them at:
8779 # ComputerVision Services
8780 # 500 Old Connecticut Path
8784 # Standout mode is dim reverse-video.
8785 pt100|pt200|wren|fenix|prime pt100/pt200,
8787 cols#80, it#8, lines#24,
8788 cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H,
8789 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
8790 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
8791 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
8792 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
8793 home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D,
8794 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n,
8795 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
8797 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
8799 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
8800 pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
8802 cup=\E[%i%p1%d;%p2%dH, use=pt100,
8804 rmso@, smso@, use=pt100,
8805 pt250w|Prime PT250 in 132-column mode,
8806 rmso@, smso@, use=pt100w,
8811 # 3475-A North 1st Street
8813 # Vox: (800)-457-4447
8814 # Fax: (408)-473-1510
8815 # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
8817 # Qume was bought by Wyse, but still (as of early 1995) has its own support
8818 # group and production division.
8820 # Discontinued Qume models:
8822 # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
8823 # built to replace them, and a qvt119+ which was a 101+ with available wide
8824 # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
8825 # and an ANSI-compatible qvt203 that replaced it. Qume started producing
8826 # ANSI-compatible terminals with the qvt323 and qvt61.
8828 # Current Qume models (as of February 1995):
8830 # All current Qume terminals have ANSI-compatible operation modes.
8831 # Qume is still producing the qvt62, which features emulations for other
8832 # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
8833 # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
8834 # with many emulations including Wyse370, Wyse 325, etc. Their newest
8835 # model is the qvt520, which is vt420-compatible.
8837 # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
8839 # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
8840 # setup mode. Shift-s should be a configuration save to NVRAM.
8842 qvt101|qvt108|qume qvt 101 and QVT 108,
8845 # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
8846 # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
8847 # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
8848 # What seems to be going on here is that this entry was designed so that
8849 # the normal highlight is bold and standout is dim plus something else
8850 # (reverse-video maybe? But then, are there two <rev> sequences?)
8852 # Added kdch1, kil1, kdl1 based on screenshot -TD:
8853 # http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
8854 qvt101+|qvt101p|qume qvt 101 PLUS product,
8856 cols#80, lines#24, xmc#0,
8857 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
8858 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8859 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
8860 flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
8861 ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
8862 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
8863 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
8864 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
8865 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
8866 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8867 qvt102|qume qvt 102,
8868 cnorm=\E., use=qvt101,
8869 # (qvt103: added <rmam>/<smam> based on init string -- esr)
8870 qvt103|qume qvt 103,
8872 cols#80, it#8, lines#24, vt#3,
8873 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
8874 clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
8875 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
8876 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
8877 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
8878 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
8879 hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
8880 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
8881 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
8882 rmso=\E[m$<2>, rmul=\E[m$<2>,
8883 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
8884 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
8886 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
8887 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
8888 qvt103-w|qume qvt103 132 cols,
8890 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
8891 qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
8893 cols#80, lines#24, xmc#0,
8894 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
8895 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
8896 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
8897 el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I,
8898 hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX,
8899 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
8900 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
8901 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
8902 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
8903 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
8904 qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
8905 lines#25, use=qvt119+,
8906 qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
8908 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
8909 qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
8910 lines#25, use=qvt119+,
8911 qvt203|qvt203+|qume qvt 203 Plus,
8912 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
8913 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
8914 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
8915 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
8916 qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
8918 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
8920 # Since a command is present for enabling 25 data lines,
8921 # a specific terminfo entry may be generated for the 203.
8922 # If one is desired for the QVT 119 PLUS then 25 lines must
8923 # be selected in the status line (setup line 9).
8925 qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
8927 is2=\E[=40h\E[?3l, use=qvt203,
8928 qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
8930 rs2=\E[?3h\E[=40h, use=qvt203,
8932 #### Televideo (tvi)
8935 # 550 East Brokaw Road
8936 # PO Box 49048 95161
8938 # Vox: (408)-954-8333
8939 # Fax: (408)-954-0623
8942 # These require incredible amounts of padding.
8944 # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
8945 # Televideo terminals are ANSI and PC-ANSI compatible.
8947 tvi803|televideo 803,
8948 clear=\E*$<10>, use=tvi950,
8950 # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
8951 # Switch settings are:
8972 # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
8988 # U do CR/LF when CR received
8989 # D do CR when CR received
9011 # S2 6 Cursor down key
9015 # S2 7 Screen colour
9019 # S2 8 DSR status (pin 6)
9023 # S2 9 DCD status (pin 8)
9027 # S2 10 DTR status (pin 20)
9030 # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
9031 # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
9032 tvi910|televideo model 910,
9034 cols#80, it#8, lines#24, xmc#1,
9035 bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9036 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
9037 home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I,
9038 if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H,
9039 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
9040 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9041 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9042 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
9043 # From: Alan R. Rogers <rogers%albany@csnet-relay>
9044 # as subsequently hacked over by someone at SCO
9045 # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
9047 # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
9050 # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
9051 # D U D D 135 D U D U 150 D U U D 300 D U U U 600
9052 # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
9053 # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
9056 # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
9057 # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
9058 # D U D D 8O1 D U U U 8E2
9060 # S1 9 Autowrap (U = on, D = off)
9061 # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
9062 # S2 1 Mode (U = block, D = conversational)
9063 # S2 2 Duplex (U = half, D = full)
9064 # S2 3 Hertz (U = 50, D = 60)
9065 # S2 4 Edit mode (U = local, D = duplex)
9066 # S2 5 Cursor type (U = underline, D = block)
9067 # S2 6 Cursor down key (U = send ^J, D = send ^V)
9068 # S2 7 Screen colour (U = green on black, D = black on green)
9069 # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
9070 # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
9071 # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
9073 tvi910+|televideo 910+,
9074 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
9075 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
9076 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
9077 ll=\E=7\s, use=tvi910,
9079 # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
9080 # <khome> from BRL entry -- esr)
9081 tvi912|tvi914|tvi920|old televideo 912/914/920,
9082 OTbs, OTpt, am, msgr,
9083 cols#80, it#8, lines#24, xmc#1,
9084 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9085 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9086 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
9087 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
9088 il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
9089 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9090 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9091 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
9093 # We got some new tvi912c terminals that act really weird on the regular
9094 # termcap, so one of our gurus worked this up. Seems that cursor
9095 # addressing is broken.
9096 tvi912cc|tvi912 at cowell college,
9099 # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
9100 # From: Benjamin C. W. Sittler
9102 # Someone has put a scanned copy of the manual online at:
9103 # http://vt100.net/televideo/912b-om/
9105 # These terminals were produced ca. 1979, and had a 12" monochrome
9106 # screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
9107 # ASCII, and were generally similar to adm3a but with attributes
9108 # (including some with magic cookies), fancy half-duplex mode, and
9111 # Some operations require truly incredible amounts of padding. The
9112 # insert_line (<il1>) and delete_line (<dl1>) operations in particular
9113 # are so slow as to be nearly unusable.
9115 # There may or may not have been a separate, earlier series of 912/920
9116 # terminals (without the "B" and "C" suffix); I have never seen one,
9117 # and the manual only describes the "B" and "C" series. The 912 and 920
9118 # are quite distinct from the 914 and 924, which were much nicer non-
9119 # magic-cookie terminals similar to the 950.
9121 # This is a new description for the following TeleVideo terminals,
9122 # distinguished chiefly by their keyboards:
9124 # TVI-912B - very odd layout, no function keys (84 keys)
9125 # TVI-920B - typewriter layout, no function keys (103 keys)
9126 # TVI-912C - very odd layout, function keys F1-F11 (82 keys)
9127 # TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
9129 # To choose a setting for the TERM variable, start with the model:
9131 # Model || base name
9132 # ----------||-----------
9133 # TVI-912B || tvi912b
9134 # TVI-912C || tvi912c
9135 # TVI-920B || tvi920b
9136 # TVI-920C || tvi920c
9138 # Then add a suffix from the following table describing installed options
9139 # and how you'd like to use the terminal:
9141 # Use Video | Second | Visual | Magic | Page || feature
9142 # Attributes | Page | Bell | Cookies | Print || suffix
9143 # ------------|--------|--------|---------|-------||---------
9144 # No | No | N/A | N/A | No || -unk
9145 # No | No | N/A | N/A | Yes || -p
9146 # No | Yes | No | N/A | No || -2p-unk
9147 # No | Yes | No | N/A | Yes || -2p-p
9148 # No | Yes | Yes | N/A | No || -vb-unk
9149 # No | Yes | Yes | N/A | Yes || -vb-p
9150 # Yes | No | N/A | No | N/A ||
9151 # Yes | No | N/A | Yes | N/A || -mc
9152 # Yes | Yes | No | No | N/A || -2p
9153 # Yes | Yes | No | Yes | N/A || -2p-mc
9154 # Yes | Yes | Yes | No | N/A || -vb
9155 # Yes | Yes | Yes | Yes | N/A || -vb-mc
9157 # So e.g. a model 920 C with second page memory option, visual bell
9158 # and no magic cookies would be tvi920c-vb; a model 912 B without the
9159 # second page memory option and using magic cookies would be
9164 # At 9600 baud, the terminal is prone to overflow its input buffer
9165 # during complex operations (insert/delete
9166 # character/line/screen/page), and it does not signal this over the
9167 # RS232 cable. The typical symptom of an overrun is that the terminal
9168 # starts beeping, and output becomes garbled.
9170 # The padding delays in this terminfo were derived using tack(1)
9171 # running on a Linux box connected to a TVI-920C with a later-model
9172 # (A49C1-style) ROM running at 9600 baud, so your mileage may
9173 # vary. The numbers below seem to give the terminal enough time so
9174 # that it doesn't overflow its input buffer and start losing
9179 # If you want to use the FUNCT key on a tvi912[bc], use the
9180 # corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
9181 # the following table (these also work on the 920 series):
9183 # Unshifted Function Keys:
9185 # Key | capname|| Equivalent
9186 # -----|--------||------------
9187 # F1 | <kf1> || FUNCT + @
9188 # F2 | <kf2> || FUNCT + A
9189 # F3 | <kf3> || FUNCT + B
9190 # F4 | <kf4> || FUNCT + C
9191 # F5 | <kf5> || FUNCT + D
9192 # F6 | <kf6> || FUNCT + E
9193 # F7 | <kf7> || FUNCT + F
9194 # F8 | <kf8> || FUNCT + G
9195 # F9 | <kf9> || FUNCT + H
9196 # F10 | <kf10> || FUNCT + I
9197 # F11 | <kf11> || FUNCT + J
9199 # Shifted Function Keys:
9201 # SHIFT + Key | capname|| Equivalent
9202 # -------------|--------||------------
9203 # SHIFT + F1 | <kf12> || FUNCT + `
9204 # SHIFT + F2 | <kf13> || FUNCT + a
9205 # SHIFT + F3 | <kf14> || FUNCT + b
9206 # SHIFT + F4 | <kf15> || FUNCT + c
9207 # SHIFT + F5 | <kf16> || FUNCT + d
9208 # SHIFT + F6 | <kf17> || FUNCT + e
9209 # SHIFT + F7 | <kf18> || FUNCT + f
9210 # SHIFT + F8 | <kf19> || FUNCT + g
9211 # SHIFT + F9 | <kf20> || FUNCT + h
9212 # SHIFT + F10 | <kf21> || FUNCT + i
9213 # SHIFT + F11 | <kf22> || FUNCT + j
9215 # PORTS AND SWITCH SETTINGS
9217 # Here are the switch settings for the TVI-912B/TVI-920B and
9218 # TVI-912C/TVI-920C:
9220 # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
9221 # 2: 9600 3: 4800 4: 2400 5: 1200
9222 # 6: 600 7: 300 8: 150 9: 75
9225 # S2 UART/Terminal options:
9227 # 1: Not used Not allowed
9228 # 2: Alternate character set Standard character set
9229 # 3: Full duplex Half duplex
9230 # 4: 50 Hz refresh 60 Hz refresh
9231 # 5: No parity Send parity
9232 # 6: 2 stop bits 1 stop bit
9233 # 7: 8 data bits 7 data bits
9234 # 8: Not used Not allowed on Rev E or lower
9235 # 9: Even parity Odd parity
9236 # 10: Steady cursor Blinking cursor
9237 # (On Rev E or lower, use W25 instead of switch 10.)
9239 # S5 UART/Terminal options:
9241 # 1: P3-6 Not connected DSR received on P3-6
9242 # 2: P3-8 Not connected DCD received on P3-8
9244 # 3 Open, 4 Open: P3-20 Not connected
9245 # 3 Open, 4 Closed: DTR on when terminal is on
9246 # 3 Closed, 4 Open: DTR is connected to RTS
9247 # 3 Closed, 4 Closed: Not allowed
9249 # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
9250 # all data transmitted out of the modem port (P3) will also be
9251 # transmitted out of the printer port (P4).
9253 # 6 Open, 7 Open: Not allowed
9254 # 6 Open, 7 Closed: 20ma current loop input
9255 # 6 Closed, 7 Open: RS232 input
9256 # 6 Closed, 7 Closed: Not allowed
9259 # If the jumper is installed, the effect will occur (the next time the terminal
9262 # S4/W31: Enables automatic LF upon receipt of CR from
9263 # remote or keyboard.
9264 # S4/W32: Enables transmission of EOT at the end of Send. If not
9265 # installed, a carriage return is sent.
9266 # S4/W33: Disables automatic carriage return in column 80.
9267 # S4/W34: Selects Page Print Mode as initial condition. If not
9268 # installed, Extension Mode is selected.
9270 # NON-STANDARD CAPABILITIES
9272 # Sending <u9> or <u7> returns a cursor position report in the format
9273 # YX\r, where Y and X are as in <cup>. This format is described in
9274 # <u8> and <u6>, but it's not clear how one should write an
9275 # appropriate scanf string, since we need to subtract %' ' from the
9276 # character after reading it. The <u9> capability is used by tack(1)
9277 # to synchronize during padding tests, and seems to work for that
9280 # This description also includes the obsolete termcap capabilities
9281 # has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
9283 # FEATURES NOT YET DESCRIBED IN THIS TERMINFO
9285 # The FUNCT modifier actually works with every normal key by sending
9286 # ^AX\r, where X is the sequence normally sent by that key. This is a
9287 # sort of meta key not currently describable in terminfo.
9289 # There are quite a few other keys (especially on the 920 models,) but
9290 # they are for the most part only useful in block mode.
9292 # These terminals have lots of forms manipulation features, mainly
9293 # useful in block mode, including "clear X to nulls" (vs. "clear X to
9294 # spaces"; nulls are sentinels for "send X" operations); "send X"
9295 # operations for uploading all or part of the screen; and block-mode
9296 # editing keys (they don't send escape sequences, but manipulate video
9297 # memory directly). Block mode is used for local editing, and protect
9298 # mode (in conjunction with the "write protect" attribute,
9299 # a.k.a. half-intensity outside of protect mode) is used to control
9300 # which parts of the screen are edited/sent/printed (by <mc0>).
9302 # There are at least two major families of ROM, "early" and
9303 # A49B1/A49C1; the major difference seems to be that the latter ROMs
9304 # support a few extra escape sequences for manipulating the off-screen
9305 # memory page, and for sending whole pages back to the host (mainly
9306 # useful in block mode.) The descriptions in this file don't use any
9307 # of those sequences: set cursor position including page (\E-PYX,
9308 # where P is \s for page 0 and ! for page 1 [actually only the LSB of
9309 # P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
9310 # as in <cup>); read cursor position (\E/), which is analogous to <u9>
9311 # and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
9312 # are as in <cup>, and some "send page" features mainly useful for
9313 # forms manipulation.
9315 # The keyboard enable (\E") and disable (\E#) sequences are unused,
9316 # except that a terminal reset (<is2>) enables the keyboard.
9318 # Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
9319 # enabled in <is2>, but auto-flip is very jarring so we don't use it.
9323 # At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
9324 # sequences (I infer that in some TeleVideo terminal they may invert
9325 # and uninvert the display) so the <flash> sequence given here is a
9326 # cheesy page-flip instead.
9328 # The back_tab (<cbt>) sequence (\EI) doesn't work according to
9329 # tack(1), so it is not included in the descriptions below.
9331 # It's not clear whether auto_left_margin (<bw>) flag should be set
9332 # for these terminals; tack says yes, so it is set here, but this
9333 # differs from other descriptions I've seen.
9335 # Extension print mode (<mc5>) echoes all characters to the printer
9336 # port [in addition to displaying them] except for the page print mode
9337 # sequence (<mc4>); this is a slight violation of the terminfo
9338 # definition for <mc5> but I don't expect it to cause problems. We
9339 # reset to page print mode in <rs1> since it may have been enabled
9342 # The descriptions with plus signs (+) are building blocks.
9344 tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
9346 cols#80, it#8, lines#24,
9347 bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9348 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
9349 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
9350 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
9351 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
9352 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n,
9353 kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA,
9354 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
9355 u7=\E?, u8=%c%c\r, u9=\E?,
9357 # This isn't included in the basic capabilities because it is
9358 # typically unusable in combination with the full range of video
9359 # attributes, since the magic cookie attributes turn into ASCII
9360 # control characters, and the half-intensity ("protected") attribute
9361 # converts all affected characters to spaces.
9363 tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
9366 # This uses half-intensity mode (<dim>) for standout (<smso>), and
9367 # exposes no other attributes (half-intensity is the only attribute
9368 # that does not generate a magic cookie.)
9370 tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
9372 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
9375 # Full magic-cookie attribute support, with half-intensity reverse
9376 # video for standout. Note that we add a space in the <dim> sequence
9377 # to give a consistent magic-cookie count. Also note that <sgr> uses
9378 # backspacing (in the TVI-supported order) to apply all requested
9379 # attributes with only a single magic cookie.
9381 tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
9383 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
9385 sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
9386 %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
9387 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
9389 # This uses the second page memory option to save & restore screen
9390 # contents. If your terminal is missing the option, this description
9391 # should still work, but that has not been tested.
9393 tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
9394 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
9395 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
9397 # This simulates flashing by briefly toggling to the other page
9400 tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
9401 bel=\EK$<100>\EK, use=tvi912b+2p,
9403 # Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
9405 tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
9406 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
9407 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
9408 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
9409 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
9410 kf8=^AG\r, kf9=^AH\r,
9412 # Combinations of the basic building blocks
9414 tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
9415 use=tvi912b+2p, use=tvi912b-unk,
9417 tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
9418 use=tvi912b+vb, use=tvi912b-unk,
9420 tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
9421 use=tvi912b+printer, use=tvi912b-unk,
9423 tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
9424 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
9426 tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
9427 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
9429 tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
9430 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
9432 tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
9433 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
9435 tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
9436 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
9438 tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
9439 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
9441 tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
9442 use=tvi912b+dim, use=tvi912b-unk,
9444 tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
9445 use=tvi912b+mc, use=tvi912b-unk,
9447 tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
9448 use=tvi920b+fn, use=tvi912b-unk,
9450 tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
9451 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
9453 tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
9454 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
9456 tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
9457 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
9459 tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
9460 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
9463 tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
9464 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
9467 tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
9468 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
9471 tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
9472 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
9475 tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
9476 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
9479 tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
9480 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
9483 tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
9484 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
9486 tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
9487 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
9489 # Televideo 921 and variants
9490 # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
9491 # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
9492 # also added empty <acsc> to suppress tic warning -- esr)
9493 tvi921|televideo model 921 with sysline same as page & real vi function,
9494 OTbs, OTpt, am, hs, xenl, xhp,
9495 cols#80, lines#24, xmc#0,
9496 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
9497 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
9498 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
9499 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
9500 if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@,
9501 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
9502 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
9503 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%,
9504 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
9505 # without the beeper
9506 # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
9507 # also added empty <acsc> to suppress tic warning -- esr)
9508 tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
9510 cols#80, lines#24, xmc#0,
9511 acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
9512 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
9513 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
9514 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
9515 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
9516 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
9517 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
9518 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
9519 nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
9520 # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
9521 tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
9522 dl1=\ER$<2*/>, il1=\EE$<2*/>,
9523 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
9524 kil1=\EE$<2*/>, use=tvi92B,
9526 # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
9527 # in from a BSD termcap file because it looks like they do something the
9528 # old ones skip -- esr)
9529 tvi924|televideo tvi924,
9530 am, bw, hs, in, mir, msgr, xenl, xon,
9531 cols#80, it#8, lines#24, wsl#80, xmc#0,
9532 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
9533 cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
9534 cub1=^H, cud1=^V, cuf1=^L,
9535 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
9536 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
9537 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
9538 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
9539 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
9540 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
9541 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
9542 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
9543 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
9544 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
9545 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
9546 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
9547 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
9550 # TVI925 DIP switches. In each of these, D = Down and U = Up,
9552 # Here are the settings for the external (baud) switches (S1):
9555 # 7 8 9 10 [Printer]
9556 # 1 2 3 4 [Main RS232]
9557 # -----------------------------------------------------
9576 # Settings for word length and stop-bits (S1)
9578 # Position Description
9580 # ---------------------------
9587 # S2 (external) settings
9589 # Position Up Dn Description
9590 # --------------------------------------------
9592 # X Duplex edit (transmit editing keys)
9593 # --------------------------------------------
9594 # 2 X 912/920 emulation
9596 # --------------------------------------------
9600 # --------------------------------------------
9604 # --------------------------------------------
9608 # --------------------------------------------
9612 # --------------------------------------------
9616 # --------------------------------------------
9617 # 6 X White on black display
9618 # X Black on white display
9619 # --------------------------------------------
9622 # --------------------------------------------
9625 # --------------------------------------------
9628 # --------------------------------------------
9631 # --------------------------------------------
9632 # 10 X CR/LF (Auto LF)
9635 # S3 (internal switch) settings:
9637 # Position Up Dn Description
9638 # --------------------------------------------
9641 # --------------------------------------------
9644 # --------------------------------------------
9647 # --------------------------------------------
9650 # --------------------------------------------
9653 # --------------------------------------------
9654 # 4 X Blinking block cursor
9656 # --------------------------------------------
9657 # 4 X Blinking underline cursor
9659 # --------------------------------------------
9660 # 4 X Steady block cursor
9662 # --------------------------------------------
9663 # 4 X Steady underline cursor
9665 # --------------------------------------------
9666 # 6 X Screen blanking timer (ON)
9667 # X Screen blanking timer (OFF)
9668 # --------------------------------------------
9669 # 7 X Page attributes
9671 # --------------------------------------------
9672 # 8 X DCD disconnected
9674 # --------------------------------------------
9675 # 9 X DSR disconnected
9677 # --------------------------------------------
9678 # 10 X DTR Disconnected
9680 # --------------------------------------------
9682 # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
9683 tvi925|televideo 925,
9684 OTbs, am, bw, hs, ul,
9685 cols#80, lines#24, xmc#1,
9686 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
9687 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9688 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
9689 flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1,
9690 ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z,
9691 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
9692 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
9693 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
9694 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
9695 tsl=\Eh\Ef, use=adm+sgr,
9696 # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
9697 # to avoid "magic cookie" standout glitch:
9698 tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
9700 kbs=^H, kcub1=^H, kcud1=\n, rmso=\E(, smso=\E), use=tvi925,
9702 # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
9703 # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
9704 # for additional capabilities,
9705 # The following tvi descriptions from B:pjphar and virus!mike
9706 # is for all 950s. It sets the following attributes:
9707 # full duplex (\EDF) write protect off (\E()
9708 # conversation mode (\EC) graphics mode off (\E%)
9709 # white on black (\Ed) auto page flip off (\Ew)
9710 # turn off status line (\Eg) clear status line (\Ef\r)
9711 # normal video (\E0) monitor mode off (\EX or \Eu)
9712 # edit mode (\Er) load blank char to space (\Ee\040)
9713 # line edit mode (\EO) enable buffer control (^O)
9714 # protect mode off (\E\047) duplex edit keys (\El)
9715 # program unshifted send key to send line all (\E016)
9716 # program shifted send key to send line unprotected (\E004)
9717 # set the following to nulls:
9718 # field delimiter (\Ex0\200\200)
9719 # line delimiter (\Ex1\200\200)
9720 # start-protected field delimiter (\Ex2\200\200)
9721 # end-protected field delimiter (\Ex3\200\200)
9722 # set end of text delimiter to carriage return/null (\Ex4\r\200)
9724 # TVI 950 Switch Setting Reference Charts
9728 # S1 1 2 3 4 5 6 7 8 9 10
9729 # +-----------------------+-----+-----+-----------------------+
9730 # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
9732 # +------+-----------------------+-----+-----+-----------------------+
9733 # | Up | See | 7 | 2 | See |
9734 # +------+-----------------------+-----+-----+-----------------------+
9735 # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
9736 # +------+-----------------------+-----+-----+-----------------------+
9739 # S2 1 2 3 4 5 6 7 8 9 10
9740 # +-----+-----+-----------------+-----+-----------+-----+-----+
9741 # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
9742 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9743 # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
9744 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9745 # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
9746 # +------+-----+-----+-----------------+-----+-----------+-----+-----+
9750 # +-----------+-----+-----+-----+-----+-----------+
9751 # | Display | 1 | 2 | 3 | 4 | Baud |
9752 # +-----------+-----+-----+-----+-----+ |
9753 # | Printer | 7 | 8 | 9 | 10 | Rate |
9754 # +-----------+-----+-----+-----+-----+-----------+
9755 # | D | D | D | D | 9600 |
9756 # | U | D | D | D | 50 |
9757 # | D | U | D | D | 75 |
9758 # | U | U | D | D | 110 |
9759 # | D | D | U | D | 135 |
9760 # | U | D | U | D | 150 |
9761 # | D | U | U | D | 300 |
9762 # | U | U | U | D | 600 |
9763 # | D | D | D | U | 1200 |
9764 # | U | D | D | U | 1800 |
9765 # | D | U | D | U | 2400 |
9766 # | U | U | D | U | 3600 |
9767 # | D | D | U | U | 4800 |
9768 # | U | D | U | U | 7200 |
9769 # | D | U | U | U | 9600 |
9770 # | U | U | U | U | 19200 |
9771 # +-----+-----+-----+-----+-----------+
9774 # +-----+-----+-----+-----------+
9775 # | 3 | 4 | 5 | Parity |
9776 # +-----+-----+-----+-----------+
9777 # | X | X | D | None |
9778 # | D | D | U | Odd |
9779 # | D | U | U | Even |
9780 # | U | D | U | Mark |
9781 # | U | U | U | Space |
9782 # +-----+-----+-----+-----------+
9786 # +-----+-----+-----------------+
9787 # | 7 | 8 | Communication |
9788 # +-----+-----+-----------------+
9789 # | D | D | Half Duplex |
9790 # | D | U | Full Duplex |
9793 # +-----+-----+-----------------+
9795 # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
9796 # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
9797 # should be present and all tvi native modes use the same string for this.
9798 # Finally, note that BSD has cud1=^V. -- esr)
9799 tvi950|televideo 950,
9800 OTbs, am, hs, mir, msgr, xenl, xon,
9801 cols#80, it#8, lines#24, xmc#1,
9802 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
9803 cr=\r, cub1=^H, cud1=\n, cuf1=^L,
9804 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
9805 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
9806 fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
9808 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
9809 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9811 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
9812 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
9813 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
9814 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
9815 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
9816 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
9819 # is for 950 with two pages adds the following:
9820 # set 48 line page (\E\\2)
9821 # place cursor at page 0, line 24, column 1 (\E-07 )
9822 # set local (no send) edit keys (\Ek)
9824 # two page 950 adds the following:
9825 # when entering ex, set 24 line page (\E\\1)
9826 # when exiting ex, reset 48 line page (\E\\2)
9827 # place cursor at 0,24,1 (\E-07 )
9828 # set duplex (send) edit keys (\El) when entering vi
9829 # set local (no send) edit keys (\Ek) when exiting vi
9831 tvi950-2p|televideo950 w/2 pages,
9832 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9833 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9835 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9836 smkx=\El, use=tvi950,
9838 # is for 950 with four pages adds the following:
9839 # set 96 line page (\E\\3)
9840 # place cursor at page 0, line 24, column 1 (\E-07 )
9842 # four page 950 adds the following:
9843 # when entering ex, set 24 line page (\E\\1)
9844 # when exiting ex, reset 96 line page (\E\\3)
9845 # place cursor at 0,24,1 (\E-07 )
9847 tvi950-4p|televideo950 w/4 pages,
9848 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9849 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9851 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9852 smkx=\El, use=tvi950,
9854 # <is2> for reverse video 950 changes the following:
9855 # set reverse video (\Ed)
9857 # set vb accordingly (\Ed ...delay... \Eb)
9859 tvi950-rv|televideo950 rev video,
9860 flash=\Ed$<200/>\Eb,
9861 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
9862 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
9866 # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
9867 tvi950-rv-2p|televideo950 rev video w/2 pages,
9868 flash=\Ed$<200/>\Eb,
9869 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9870 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9872 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9873 smkx=\El, use=tvi950,
9875 # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
9876 tvi950-rv-4p|televideo950 rev video w/4 pages,
9877 flash=\Ed$<200/>\Eb,
9878 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
9879 \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
9881 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
9882 smkx=\El, use=tvi950,
9883 # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
9884 # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
9885 # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
9886 # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
9887 # the :ko: string had :cl: in it, which means that one of the original
9888 # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
9889 # the 950 has. Finally, corrected the <kel> string to match the 950 and what
9890 # ko implies -- esr)
9891 # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
9893 tvi955|televideo 955,
9896 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
9897 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
9898 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
9899 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
9900 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
9901 rmam=\E[=7l, rmxon=^N,
9902 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
9904 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
9906 tvi955-w|955-w|televideo955 w/132 cols,
9908 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
9909 # use half-intensity as normal mode, full intensity as <bold>
9910 tvi955-hb|955-hb|televideo955 half-bright,
9911 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
9912 sgr0=\EG0\E[=5h, use=tvi955,
9913 # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
9914 # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
9915 # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
9916 # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
9917 # it does to the function keys. I deduced <rmam>/<smam>.
9918 # also added empty <acsc> to suppress tic warning, -- esr)
9919 tvi970|televideo 970,
9920 OTbs, OTpt, am, da, db, mir, msgr,
9921 cols#80, it#8, lines#24,
9922 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
9923 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
9924 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
9925 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
9926 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
9927 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
9928 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9929 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
9930 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
9931 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
9932 sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
9933 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
9934 smul=\E[4m, vpa=\E[%i%p1%dd,
9935 tvi970-vb|televideo 970 with visual bell,
9936 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
9938 tvi970-2p|televideo 970 with using 2 pages of memory,
9939 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
9941 # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
9942 # per line (rather than 40), Esc K chooses the normal character set. Not sure
9943 # padding is needed, but adapted from the tvi920c termcap. The <smso> and
9944 # <smul> strings are klutzy, but at least use no screen space.
9945 # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
9946 # its absence means <smam>=\Ev isn't safe to use. -- esr)
9947 # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
9948 # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
9949 # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
9950 tvipt|televideo personal terminal,
9953 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
9954 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
9955 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
9956 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n,
9957 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
9958 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
9959 # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
9960 tvi9065|televideo 9065,
9961 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
9962 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
9964 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
9965 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
9966 cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
9967 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
9968 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
9969 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
9970 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
9971 el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
9972 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
9973 il=\E[%p1%dL, il1=\EE, ind=\n, indn=\E[%p1%dS, invis=\EG1,
9975 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
9976 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
9977 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
9978 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
9979 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
9980 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
9981 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n,
9982 pfkey=\E|%p1%{48}%+%c3%p2%s\031,
9983 pfloc=\E|%p1%{48}%+%c2%p2%s\031,
9984 pfx=\E|%p1%{48}%+%c1%p2%s\031,
9985 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
9986 rep=\E[%p2%db%p1%c, rev=\EG4,
9987 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
9988 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
9989 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
9990 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
9991 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
9992 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
9993 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
9994 \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
9995 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
9997 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
9998 %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
10000 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
10001 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
10002 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
10006 # In September 1993, Visual Technology of Westboro, Massachusetts,
10007 # merged with White Pine Software of Nashua, New Hampshire.
10009 # White Pine Software may be contacted at +1 603/886-9050.
10010 # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
10013 # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
10014 # Recently I hacked together the following termcap for Visual
10015 # Technology's Visual 50 terminal. It's a slight modification of
10016 # the vt52 termcap.
10017 # It's intended to run when the Visual 50 is in vt52 emulation mode
10018 # (I know what you're thinking; if it's emulating a vt52, then why
10019 # another termcap? Well, it turns out that the Visual 50 can handle
10020 # <dl1> and db(?) among other things, which the vt52 can't)
10021 # The termcap works OK for the most part. The only problem is on
10022 # character inserts. The whole line gets painfully redrawn for each
10023 # character typed. Any suggestions?
10024 # Beau's entry is combined with the vi50 entry from University of Wisconsin.
10025 # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
10026 # disguise; <kf7>-<kf9> are really l1-l3.
10028 OTbs, OTpt, am, da, db, msgr,
10029 cols#80, it#8, lines#24,
10030 OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H,
10031 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10032 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
10033 ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
10034 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
10035 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
10036 nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
10037 # this one was BSD & SCO's vi50
10038 vi50adm|visual 50 in adm3a mode,
10040 cols#80, it#8, lines#24,
10041 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10042 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
10043 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H,
10044 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
10045 rmso=\ET, smso=\EU,
10046 # From: Jeff Siegal <jbs@quiotix.com>
10048 OTbs, am, mir, msgr,
10049 cols#80, it#8, lines#24,
10050 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
10051 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10052 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
10053 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
10054 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
10055 smir=\Ea, smso=\EU,
10057 # Visual 200 from BRL
10058 # The following switch settings are assumed for normal operation:
10059 # FULL_DUPLEX SCROLL CR
10060 # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
10061 # Other switches may be set for operator convenience or communication
10063 # Character insertion is kludged in order to get around the "beep" misfeature.
10064 # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
10065 # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
10066 # and <dl1> strings, but we seem to get along fine without them.
10068 OTbs, OTpt, am, mir, msgr,
10069 OTkn#10, cols#80, it#8, lines#24,
10070 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H,
10071 cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
10072 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
10073 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=\n, invis=\Ea,
10074 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
10075 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
10076 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
10077 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
10078 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
10079 rmacs=\EG, rmkx=\E>, rmso=\E3,
10080 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
10081 smkx=\E=, smso=\E4, tbc=\Eg,
10082 # The older Visuals didn't come with function keys. This entry uses
10083 # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
10084 # If your version of vi doesn't support function keys you may want
10086 vi200-f|visual 200 no function keys,
10087 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
10088 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
10089 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
10091 vi200-rv|visual 200 reverse video,
10092 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
10094 # the function keys are programmable but we don't reprogram them to their
10095 # default values with <is2> because programming them is very verbose. maybe
10096 # an initialization file should be made for the 300 and they could be stuck
10098 # (vi300: added <rmam>/<smam> based on init string -- esr)
10099 vi300|visual 300 ansi x3.64,
10102 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
10103 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
10104 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
10106 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
10107 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10108 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
10109 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
10110 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
10111 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
10112 smso=\E[1m, smul=\E[4m,
10113 # some of the vi300s have older firmware that has the command
10114 # sequence for setting editing extent reversed.
10115 vi300-old|visual 300 with old firmware (set edit extent reversed),
10116 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
10118 # Visual 500 prototype entry from University of Wisconsin.
10119 # The best place to look for the escape sequences is page A1-1 of the
10120 # Visual 500 manual. The initialization sequence given here may be
10121 # overkill, but it does leave out some of the initializations which can
10122 # be done with the menus in set-up mode.
10123 # The :xp: line below is so that emacs can understand the padding requirements
10124 # of this slow terminal. :xp: is 10 time the padding factor.
10125 # (vi500: removed unknown :xp#4: termcap;
10126 # also added empty <acsc> to suppress tic warning -- esr)
10129 cols#80, it#8, lines#33,
10130 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
10131 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
10132 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
10133 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
10134 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
10136 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
10137 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
10138 khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
10139 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
10141 # The visual 550 is a visual 300 with tektronix graphics,
10142 # and with 33 lines. clear screen is modified here to
10143 # also clear the graphics.
10144 vi550|visual 550 ansi x3.64,
10146 clear=\030\E[H\E[2J, use=vi300,
10148 vi603|visual603|visual 603,
10150 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
10151 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
10152 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
10153 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
10154 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
10155 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
10156 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
10162 # 3471 North First Street
10163 # San Jose, CA 95134
10164 # Vox: (408)-473-1200
10165 # Fax: (408) 473-1222
10166 # Web: http://www.wyse.com
10168 # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
10169 # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
10170 # obvious address, <http://www.wyse.com>. They keep terminfo entries at
10171 # https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
10174 # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
10175 # They now own the Qume and Amdek brands, too. So these are the people to
10176 # talk with about all Link, Qume, and Amdek terminals.
10178 # These entries include a few small fixes.
10179 # I canceled the bel capacities in the vb entries.
10180 # I made two trivial syntax fixes in the wyse30 entry.
10181 # I made some entries relative to adm+sgr.
10184 # Note: The wyse75, wyse85, and wyse99 have been discontinued.
10186 # Although the Wyse 30 can support more than one attribute
10187 # it requires magic cookies to do so. Many applications do not
10188 # function well with magic cookies. The following terminfo uses
10189 # the protect mode to support one attribute (dim) without cookies.
10190 # If more than one attribute is needed then the wy30-mc terminfo
10193 wy30|wyse30|Wyse 30,
10194 am, bw, hs, mc5i, mir, msgr, xon,
10195 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10196 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
10197 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H,
10198 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10199 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
10200 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
10201 fsl=\r, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
10202 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
10203 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
10204 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
10205 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10206 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
10207 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
10208 mc5=^X, nel=\r\n, pfx=\Ez%p1%{63}%+%c%p2%s\177,
10209 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
10210 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10211 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10212 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10213 smso=\E`7\E), tbc=\E0, tsl=\EF,
10215 # This terminal description uses the non-hidden attribute mode
10216 # (with magic cookie).
10218 # (wy30-mc: added <smcup> to suppress tic warning --esr)
10219 wy30-mc|wyse30-mc|wyse 30 with magic cookies,
10222 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
10223 rmcup=\EG0, rmso=\EG0,
10224 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10225 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10226 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10227 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10228 smso=\EG4, use=wy30, use=adm+sgr,
10229 # The mandatory pause used by <flash> does not work with
10230 # older versions of terminfo. If you see this effect then
10231 # unset xon and delete the / from the delay.
10232 # i.e. change $<100/> to $<100>
10233 wy30-vb|wyse30-vb|wyse 30 visible bell,
10236 # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
10237 # Normal) without magic cookies by using the protect mode.
10238 # The following description uses this feature, but when more
10239 # than one attribute is put on the screen at once, all attributes
10240 # will be changed to be the same as the last attribute given.
10241 # The Wyse 50 can support more attributes when used with magic
10242 # cookies. The wy50-mc terminal description uses magic cookies
10243 # to correctly handle multiple attributes on a screen.
10245 wy50|wyse50|Wyse 50,
10246 am, bw, hs, mc5i, mir, msgr, xon,
10247 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
10248 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
10249 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H,
10250 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
10251 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
10252 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
10253 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
10254 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
10255 kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW,
10256 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
10257 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
10258 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10259 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10260 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
10261 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
10262 pfx=\Ez%p1%{63}%+%c%p2%s\177,
10263 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
10264 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
10265 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
10267 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
10268 smso=\E`6\E), tbc=\E0, tsl=\EF,
10270 # This terminal description uses the non-hidden attribute mode
10271 # (with magic cookie).
10273 # The mandatory pause used by flash does not work with some
10274 # older versions of terminfo. If you see this effect then
10275 # unset <xon> and delete the / from the delay.
10276 # i.e. change $<100/> to $<100>
10277 # (wy50-mc: added <smcup> to suppress tic warning --esr)
10278 wy50-mc|wyse50-mc|wyse 50 with magic cookies,
10281 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
10282 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
10283 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
10284 %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
10285 %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
10286 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
10287 smso=\EGt, use=wy50, use=adm+sgr,
10288 wy50-vb|wyse50-vb|wyse 50 visible bell,
10290 wy50-w|wyse50-w|wyse 50 132-column,
10291 cols#132, lw#7, nlab#16, wsl#97,
10292 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
10294 wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
10298 # The Wyse 350 is a Wyse 50 with color.
10299 # Unfortunately this means that it has magic cookies.
10300 # The color attributes are designed to overlap the reverse, dim and
10301 # underline attributes. This is nice for monochrome applications
10302 # because you can make underline stuff green (or any other color)
10303 # but for true color applications it's not so hot because you cannot
10304 # mix color with reverse, dim or underline.
10305 # To further complicate things one of the attributes must be
10306 # black (either the foreground or the background). In reverse video
10307 # the background changes color with black letters. In normal video
10308 # the foreground changes colors on a black background.
10309 # This terminfo uses some of the more advanced features of curses
10310 # to display both color and blink. In the final analysis I am not
10311 # sure that the wy350 runs better with this terminfo than it does
10312 # with the wy50 terminfo (with user adjusted colors).
10314 # The mandatory pause used by flash does not work with
10315 # older versions of terminfo. If you see this effect then
10316 # unset xon and delete the / from the delay.
10317 # i.e. change $<100/> to $<100>
10319 # Bug: The <op> capability resets attributes.
10320 wy350|wyse350|Wyse 350,
10321 am, bw, hs, mc5i, mir, xon,
10322 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
10324 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
10325 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
10326 cub1=^H, cud1=\n, cuf1=^L,
10327 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
10328 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
10329 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
10330 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
10331 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
10332 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
10333 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
10334 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
10335 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
10336 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
10337 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
10338 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0,
10339 pfx=\Ez%p1%{63}%+%c%p2%s\177,
10340 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
10341 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
10342 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
10343 %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
10344 %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
10346 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
10347 %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
10348 %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
10350 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
10351 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
10352 wy350-vb|wyse350-vb|wyse 350 visible bell,
10354 wy350-w|wyse350-w|wyse 350 132-column,
10355 cols#132, lw#7, nlab#16, wsl#97,
10356 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
10358 wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
10361 # This terminfo description is untested.
10362 # The wyse100 emulates an adm31, so the adm31 entry should work.
10366 cols#80, lines#24, xmc#1,
10367 bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10368 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10369 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n,
10370 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
10371 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
10372 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
10373 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
10375 # The Wyse 120/150 has most of the features of the Wyse 60.
10376 # This terminal does not need padding up to 9600 baud!
10377 # <msgr> should be set but the clear screen fails when in
10378 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
10381 wy120|wyse120|wy150|wyse150|Wyse 120/150,
10382 am, bw, hs, km, mc5i, mir, msgr, xon,
10383 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
10384 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10385 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
10386 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10387 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
10388 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
10389 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=\011$<1>,
10390 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
10391 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10393 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10394 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10395 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10396 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10397 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10398 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10399 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
10400 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
10401 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10402 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10403 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
10404 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
10405 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
10406 rs3=\EwG\Ee($<100>,
10407 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10408 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10409 %{64}%|%;%?%p7%t%{1}%|%;%c,
10410 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10411 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10412 tbc=\E0, tsl=\EF, use=adm+sgr,
10414 wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
10415 cols#132, lw#7, nlab#16, wsl#97,
10416 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
10417 rs2=\E`;$<70>, use=wy120,
10419 wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
10420 lh@, lines#25, lw@, nlab@,
10421 pln@, rs3=\EwG\Ee)$<100>, use=wy120,
10423 wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
10424 lh@, lines#25, lw@, nlab@,
10425 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
10427 wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
10430 wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
10433 # The Wyse 60 is like the Wyse 50 but with more padding.
10434 # The reset strings are slow and the pad times very depending
10435 # on other parameters such as font loading. I have tried
10436 # to follow the following outline:
10438 # <rs1> -> set personality
10439 # <rs2> -> set number of columns
10440 # <rs3> -> set number of lines
10441 # <is1> -> select the proper font
10442 # <is2> -> do the initialization
10443 # <is3> -> set up display memory (2 pages)
10445 # The Wyse 60's that have vt100 emulation are slower than the
10446 # older Wyse 60's. This change happened mid-1987.
10447 # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
10449 # The meta key is only half right. This terminal will return the
10450 # high order bit set when you hit CTRL-function_key
10452 # It may be useful to assign two function keys with the
10453 # values \E=(\s look at old data in page 1
10454 # \E=W, look at bottom of page 1
10455 # where \s is a space ( ).
10458 # The Wyse 60 runs faster when the XON/XOFF
10459 # handshake is turned off.
10461 # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
10462 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
10463 wy60|wyse60|Wyse 60,
10464 am, bw, hs, km, mc5i, mir, msgr,
10465 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
10466 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10467 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
10468 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10469 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10470 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
10471 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
10472 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
10473 ip=$<3>, is1=\EcB0\EcC1,
10474 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10476 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10477 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10478 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10479 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10480 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10481 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10482 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
10483 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
10484 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10485 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10486 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
10487 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
10488 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
10489 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
10490 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10491 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10492 %{64}%|%;%?%p7%t%{1}%|%;%c,
10493 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10494 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10495 tbc=\E0, tsl=\EF, use=adm+sgr,
10497 wy60-w|wyse60-w|wyse 60 132-column,
10498 cols#132, lw#7, nlab#16, wsl#97,
10499 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
10500 rs2=\EeF$<150>\E`;$<150>, use=wy60,
10502 wy60-25|wyse60-25|wyse 60 80-column 25-lines,
10503 lh@, lines#25, lw@, nlab@,
10504 pln@, rs3=\EwG\Ee)$<200>, use=wy60,
10505 wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
10506 lh@, lines#25, lw@, nlab@,
10507 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
10509 wy60-42|wyse60-42|wyse 60 80-column 42-lines,
10511 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
10512 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
10513 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
10514 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
10515 wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
10516 cols#132, lw#7, nlab#16, wsl#97,
10517 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
10518 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
10519 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
10521 wy60-43|wyse60-43|wyse 60 80-column 43-lines,
10522 lh@, lines#43, lw@, nlab@,
10523 pln@, rs3=\Ee+$<150>, use=wy60-42,
10524 wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
10525 lh@, lines#43, lw@, nlab@,
10526 pln@, rs3=\Ee+$<150>, use=wy60-42-w,
10528 wy60-vb|wyse60-vb|Wyse 60 visible bell,
10530 wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
10533 # The Wyse-99GT looks at lot like the Wyse 60 except that it
10534 # does not have the 42/43 line mode. In the Wyse-60 the "lines"
10535 # setup parameter controls the number of lines on the screen.
10536 # For the Wyse 99GT the "lines" setup parameter controls the
10537 # number of lines in a page. The screen can display 25 lines max.
10538 # The Wyse-99GT also has personalities for the VT220 and
10539 # Tektronix 4014. But this has no bearing on the native mode.
10541 # (msgr) should be set but the clear screen fails when in
10542 # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
10543 # then set msgr, else use msgr@.
10545 # u0 -> enter Tektronix mode
10546 # u1 -> exit Tektronix mode
10548 wy99gt|wyse99gt|Wyse 99gt,
10550 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
10551 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
10552 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
10553 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
10554 u0=\E~>\E8, u1=\E[42h, use=wy60,
10556 wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
10557 cols#132, lw#7, nlab#16, wsl#97,
10558 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
10559 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
10562 wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
10563 lh@, lines#25, lw@, nlab@,
10564 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
10566 wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
10567 lh@, lines#25, lw@, nlab@,
10568 pln@, rs2=\E`;$<150>, use=wy99gt-w,
10570 wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
10573 wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
10574 bel@, use=wy99gt-w,
10576 # Can't set tabs! Other bugs (ANSI mode only):
10577 # - can't redefine function keys (anyway, key redefinition in ANSI mode
10578 # is too much complex to be described);
10579 # - meta key can't be described (the terminal forgets it when reset);
10580 # The xon-xoff handshaking can't be disabled while in ansi personality, so
10581 # emacs can't work at speed greater than 9600 baud. No padding is needed at
10583 # dch1 has been commented out because it causes annoying glittering when
10584 # vi deletes one character at the beginning of a line with tabs in it.
10585 # dch makes sysgen(1M) have a horrible behaviour when deleting
10586 # a screen and makes screen(1) behave badly, so it is disabled too. The nice
10587 # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
10588 # not, so smir and rmir are commented out as well.
10589 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10590 wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
10591 am, km, mc5i, mir, msgr, xenl,
10592 cols#80, it#8, lines#25, vt#3,
10593 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
10594 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10595 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r,
10596 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
10597 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
10598 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
10599 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
10600 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
10601 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
10602 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
10603 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
10604 il1=\E[L, ind=\n$<1>, invis=\E[8m,
10605 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
10606 ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
10607 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
10608 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
10609 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
10610 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
10611 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
10612 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
10613 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
10614 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
10615 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
10616 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
10617 ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
10620 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
10621 %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
10622 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
10623 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
10625 # This is the american terminal. Here tabs work fine.
10626 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10627 wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
10628 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
10630 # This terminal (firmware version 02) has a lot of bugs:
10631 # - can't set tabs;
10632 # - other bugs in ANSI modes (see above).
10633 # This description disables handshaking when using cup. This is because
10634 # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
10635 # cannot be used at speeds greater than 9600 baud, because at greater
10636 # speeds handshaking is needed even for character sending. If you use
10637 # DTR handshaking, you can use even greater speeds.
10638 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10639 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
10640 am, bw, hs, km, mc5i, mir, msgr, xon,
10641 cols#80, it#8, lines#25, wsl#46,
10642 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
10643 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
10644 cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
10645 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10646 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
10647 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
10648 flash=\E\^1$<30/>\E\^0, fsl=\r, home=^^, ht=^I, il1=\EE,
10649 ind=\n, invis=\EG3,
10650 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
10651 \^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er
10653 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
10654 kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
10655 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
10656 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
10657 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
10658 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
10659 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
10660 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
10661 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
10662 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
10663 9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
10664 \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
10665 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
10666 %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
10668 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
10669 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
10671 # This is the american terminal. Here tabs work.
10672 # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
10673 wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
10674 hts=\E1, tbc=\E0, use=wy99f,
10677 # The Wyse 160 is combination of the WY-60 and the WY-99gt.
10678 # The reset strings are slow and the pad times very depending
10679 # on other parameters such as font loading. I have tried
10680 # to follow the following outline:
10682 # <rs1> -> set personality
10683 # <rs2> -> set number of columns
10684 # <rs3> -> set number of lines
10685 # <is1> -> select the proper font
10686 # <is2> -> do the initialization
10687 # <is3> -> set up display memory (2 pages)
10689 # The display memory may be used for either text or graphics.
10690 # When "Display Memory = Shared" the terminal will have more pages
10691 # but garbage may be left on the screen when you switch from
10692 # graphics to text. If "Display Memory = Unshared" then the
10693 # text area will be only one page long.
10695 # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
10696 # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
10697 wy160|wyse160|Wyse 160,
10698 am, bw, hs, km, mc5i, mir, msgr,
10699 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
10700 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
10701 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
10702 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
10703 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
10704 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
10705 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=\r, home=\E{, ht=^I,
10706 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
10707 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
10709 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
10710 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
10711 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
10712 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
10713 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
10714 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
10715 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
10716 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
10717 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
10718 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
10719 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
10720 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
10721 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
10722 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
10723 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
10724 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
10725 %{64}%|%;%?%p7%t%{1}%|%;%c,
10726 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
10727 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
10728 tbc=\E0, tsl=\EF, use=adm+sgr,
10730 wy160-w|wyse160-w|wyse 160 132-column,
10731 cols#132, lw#7, nlab#16, wsl#90,
10732 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
10733 rs2=\EeF$<150>\E`;$<150>, use=wy160,
10735 wy160-25|wyse160-25|wyse 160 80-column 25-lines,
10736 lh@, lines#25, lw@, nlab@,
10737 pln@, rs3=\EwG\Ee)$<200>, use=wy160,
10738 wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
10739 lh@, lines#25, lw@, nlab@,
10740 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
10742 wy160-42|wyse160-42|wyse 160 80-column 42-lines,
10744 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
10745 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
10746 rs3=\Ee*$<150>, use=wy160,
10747 wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
10748 cols#132, lw#7, nlab#16, wsl#90,
10749 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
10750 rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
10752 wy160-43|wyse160-43|wyse 160 80-column 43-lines,
10753 lh@, lines#43, lw@, nlab@,
10754 pln@, rs3=\Ee+$<150>, use=wy160-42,
10755 wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
10756 lh@, lines#43, lw@, nlab@,
10757 pln@, rs3=\Ee+$<150>, use=wy160-42-w,
10759 wy160-vb|wyse160-vb|Wyse 160 visible bell,
10761 wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
10764 # The Wyse 75 is a vt100 lookalike without advanced video.
10766 # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
10767 # Underline) without magic cookies. The following description
10768 # uses this capability, but when more than one attribute is
10769 # put on the screen at once, all attributes will be changed
10770 # to be the same as the last attribute given.
10771 # The Wyse 75 can support more attributes when used with magic
10772 # cookies. The wy75-mc terminal description uses magic cookies
10773 # to correctly handle multiple attributes on a screen.
10775 wy75|wyse75|wyse 75,
10776 am, hs, mc5i, mir, msgr, xenl, xon,
10777 cols#80, lines#24, ma#1, pb#1201, wsl#78,
10778 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10779 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
10780 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr$<2>,
10781 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
10782 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10783 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
10784 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
10785 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
10786 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
10787 enacs=\E)0, flash=\E[30h\E\,$<250/>\E[30l, fsl=^A,
10788 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
10789 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
10790 ind=\n$<2>, ip=$<1>,
10791 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
10792 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
10793 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
10794 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
10795 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
10796 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
10797 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
10798 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
10799 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
10800 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
10801 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
10802 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
10803 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
10805 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
10806 \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
10808 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10809 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
10810 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
10812 # This terminal description uses the non-hidden attribute mode
10813 # (with magic cookie).
10815 wy75-mc|wyse75-mc|wyse 75 with magic cookies,
10818 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
10819 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
10820 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
10821 %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
10823 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
10825 wy75-vb|wyse75-vb|wyse 75 with visible bell,
10828 wy75-w|wyse75-w|wyse 75 in 132 column mode,
10830 rs2=\E[35h\E[?3h$<80>, use=wy75,
10831 wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
10835 # Wyse 85 emulating a vt220 7 bit mode.
10836 # 24 line screen with status line.
10838 # The vt220 mode permits more function keys but it wipes out
10839 # the escape key. I strongly recommend that <f11> be set to
10841 # The terminal may have to be set for 8 data bits and 2 stop
10842 # bits for the arrow keys to work.
10843 # The Wyse 85 runs faster with XON/XOFF enabled. Also the
10844 # <dch> and <ich> work best when XON/XOFF is set. <ich> and
10845 # <dch> leave trash on the screen when used without XON/XOFF.
10847 wy85|wyse85|wyse 85,
10848 am, hs, mc5i, mir, msgr, xenl, xon,
10849 cols#80, it#8, lines#24, wsl#80,
10850 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10851 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10852 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
10853 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10854 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
10855 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10856 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10857 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10858 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10859 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
10860 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10861 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10862 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10863 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10864 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
10865 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
10866 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
10867 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
10868 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
10869 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
10870 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
10871 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10872 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10873 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10874 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10875 rs3=\E[?5l, sc=\E7,
10876 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
10877 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10878 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10879 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10880 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
10882 # Wyse 85 with visual bell.
10883 wy85-vb|wyse85-vb|wyse 85 with visible bell,
10884 bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
10886 # Wyse 85 in 132-column mode.
10887 wy85-w|wyse85-w|wyse 85 in 132-column mode,
10889 rs2=\E[35h$<70/>\E[?3h, use=wy85,
10891 # Wyse 85 in 132-column mode with visual bell.
10892 wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
10895 # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
10896 # This copes with an apparent firmware bug in the wy85. He writes:
10897 # "What I did was change leave the terminal cursor keys set to Normal
10898 # (instead of application), and change \E[ to \233 for all the keys in
10899 # terminfo. At one point, I found some reference indicating that this
10900 # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
10901 # me), but I can't find that and the server under my bookmark to "Wyse
10902 # Technical" isn't responding. So there's the question of whether the wy85
10903 # terminfo should reflect the manufacturer's intended behaviour of the terminal
10905 wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
10906 am, hs, mc5i, mir, msgr, xenl, xon,
10907 cols#80, it#8, lines#24, wsl#80,
10908 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10909 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10910 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
10911 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
10912 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
10913 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
10914 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
10915 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
10916 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
10917 enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
10918 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
10919 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
10920 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
10921 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
10922 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
10923 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
10924 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
10925 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
10926 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
10927 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
10928 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
10929 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
10930 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
10931 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
10932 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
10933 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
10934 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
10935 rs3=\E[?5l, sc=\E7,
10936 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
10937 %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
10938 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
10939 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
10940 tsl=\E[40h\E7\E[25;%i%p1%dH,
10942 # Wyse 185 emulating a vt320 7 bit mode.
10944 # This terminal always displays 25 lines. These lines may be used
10945 # as 24 data lines and a terminal status line (top or bottom) or
10946 # 25 data lines. The 48 and 50 line modes change the page size
10947 # and not the number of lines on the screen.
10949 # The Compose Character key can be used as a meta key if changed
10952 wy185|wyse185|wyse 185,
10953 am, hs, km, mc5i, mir, msgr, xenl, xon,
10954 cols#80, it#8, lines#24, wsl#80,
10955 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10956 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
10957 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
10958 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
10959 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
10960 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
10961 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
10962 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
10963 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
10964 el=\E[K, el1=\E[1K, enacs=\E)0,
10965 flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
10966 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
10967 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
10968 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
10969 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
10970 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
10971 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
10972 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
10973 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
10974 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
10975 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
10976 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
10977 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
10978 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
10979 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
10980 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
10981 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
10982 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
10983 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
10984 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
10985 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
10986 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
10987 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
10990 # Wyse 185 with 24 data lines and top status (terminal status)
10991 wy185-24|wyse185-24|wyse 185 with 24 data lines,
10993 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
10996 # Wyse 185 with visual bell.
10997 wy185-vb|wyse185-vb|wyse 185+flash,
11000 # Wyse 185 in 132-column mode.
11001 wy185-w|wyse185-w|wyse 185 in 132-column mode,
11003 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11004 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
11006 # Wyse 185 in 132-column mode with visual bell.
11007 wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
11010 # wy325 terminfo entries
11011 # Done by Joe H. Davis 3-9-92
11013 # lines 25 columns 80
11015 wy325|wyse325|Wyse epc,
11016 am, bw, hs, mc5i, mir,
11017 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
11018 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
11019 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
11020 cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
11021 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
11022 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
11023 flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
11024 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
11025 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
11027 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
11028 kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
11029 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
11030 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
11031 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
11032 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
11033 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
11034 mc0=\EP, mc4=^T, mc5=\Ed#,
11035 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
11036 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
11037 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
11038 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
11039 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
11040 rs3=\EwG\Ee($<100>,
11041 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
11042 %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
11043 %{64}%|%;%?%p7%t%{1}%|%;%c,
11044 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
11045 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
11046 tsl=\EF, use=adm+sgr,
11049 # lines 24 columns 80 vb
11051 wy325-vb|wyse325-vb|wyse-325 with visual bell,
11055 # lines 24 columns 132
11057 wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
11058 cols#132, lw#7, nlab#16, wsl#97,
11059 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
11060 rs2=\E`;$<70>, use=wy325,
11062 # lines 25 columns 80
11064 wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
11065 lh@, lines#25, lw@, nlab@,
11066 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11068 # lines 25 columns 132
11070 wy325-25w|wyse325-25w|wy325 132 columns,
11071 lh@, lines#25, lw@, nlab@,
11072 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11074 # lines 25 columns 132 vb
11076 wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
11080 # lines 42 columns 80
11082 wy325-42|wyse325-42|wyse-325 42 lines,
11083 lh@, lines#42, lw@, nlab@,
11084 pln@, rs3=\EwG\Ee)$<100>, use=wy325,
11086 # lines 42 columns 132
11088 wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
11089 lh@, lines#42, lw@, nlab@,
11090 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11092 # lines 42 columns 132 vb
11094 wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
11097 # lines 43 columns 80
11099 wy325-43|wyse325-43|wyse-325 43 lines,
11100 lh@, lines#43, lw@, nlab@,
11103 # lines 43 columns 132
11105 wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
11106 lh@, lines#43, lw@, nlab@,
11107 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
11109 # lines 43 columns 132 vb
11111 wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
11114 # Wyse 370 -- 24 line screen with status line.
11116 # The terminal may have to be set for 8 data bits and 2 stop
11117 # bits for the arrow keys to work.
11119 # If you change keyboards the terminal will send different
11120 # escape sequences.
11121 # The following definition is for the basic terminal without
11124 # <u0> -> enter Tektronix 4010/4014 mode
11125 # <u1> -> exit Tektronix 4010/4014 mode
11126 # <u2> -> enter ASCII mode (from any ANSI mode)
11127 # <u3> -> exit ASCII mode (goto native ANSI mode)
11128 # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
11129 # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
11131 # Bug: The <op> capability resets attributes.
11132 wy370-nk|wyse 370 without function keys,
11133 am, ccc, hs, mc5i, mir, msgr, xenl, xon,
11134 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
11135 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11136 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11137 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11138 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11139 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11140 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
11141 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
11142 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
11143 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
11144 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
11145 flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
11146 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
11147 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
11149 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
11150 %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
11151 %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
11152 %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
11154 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
11155 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
11156 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
11158 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
11159 \E[66;5;51w\E[66;6;61w\E[66;7;64w,
11160 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
11161 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
11162 rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
11163 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
11164 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
11165 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11166 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11167 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
11168 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
11169 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
11170 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
11171 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
11173 # Function key set for the ASCII (wy-50 compatible) keyboard
11174 # This is the default 370.
11176 wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
11177 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11178 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
11179 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
11180 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
11181 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
11182 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
11183 knp=\E[U, kpp=\E[V, use=wy370-nk,
11185 # Function key set for the VT-320 (and wy85) compatible keyboard
11187 wy370-105k|Wyse 370 with 105 key keyboard,
11188 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11189 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
11190 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
11191 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
11192 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
11193 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
11194 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
11195 use=wy370-nk, use=vt220+keypad,
11197 # Function key set for the PC compatible keyboard
11199 wy370-EPC|Wyse 370 with 102 key keyboard,
11200 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11201 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
11202 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
11203 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
11204 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
11206 # Wyse 370 with visual bell.
11207 wy370-vb|Wyse 370 with visible bell,
11210 # Wyse 370 in 132-column mode.
11211 wy370-w|Wyse 370 in 132-column mode,
11213 rs2=\E[35h\E[?3h$<70>, use=wy370,
11215 # Wyse 370 in 132-column mode with visual bell.
11216 wy370-wvb|Wyse 370 with visible bell 132-columns,
11217 flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
11218 wy370-rv|Wyse 370 reverse video,
11219 rs3=\E[32h\E[?5h, use=wy370,
11221 # Wyse 99gt Tektronix 4010/4014 emulator,
11223 wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
11226 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
11227 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11228 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11229 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11230 %{31}%&%{64}%+%c\037,
11232 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11235 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11237 is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
11239 # Wyse 160 Tektronix 4010/4014 emulator,
11241 wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
11242 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
11243 %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
11244 %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
11245 %{31}%&%{64}%+%c\037,
11246 home=^]8`g @\037, use=wy99gt-tek,
11248 # Wyse 370 Tektronix 4010/4014 emulator,
11250 wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
11253 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
11254 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
11255 %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
11256 %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
11258 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
11261 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
11263 is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
11264 nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
11266 # Vendor-supplied Wyse entries end here.
11269 #TITLE: TERMINFO ENTRY WY520
11271 # The WY520 terminfo is based on the WY285 entry published on the WYSE
11272 # BBS with the addition of more function keys and special keys.
11274 # rs1 -> set personality
11275 # rs2 -> set number of columns
11276 # rs3 -> set number of lines
11277 # is1 -> select the proper font
11278 # is2 -> do the initialization
11279 # is3 -> If this string is empty then rs3 gets sent.
11281 # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
11282 # - The BS key is programmed to generate BS in smcup since
11283 # is2 doesn't seem to work.
11284 # - Remove and shift/Remove: delete a character
11285 # - Insert : enter insert mode
11286 # - Find : delete to end of file
11287 # - Select : clear a line
11288 # - F11, F12, F13: send default sequences (not ESC, BS, LF)
11290 # - Bottom status line (host writable line) is used.
11291 # - smkx,rmkx are removed because this would put the numeric
11292 # keypad in Dec application mode which doesn't seem to work
11293 # with SCO applications.
11295 wy520|wyse520|wyse 520,
11296 am, hs, km, mc5i, mir, xenl, xon,
11297 cols#80, it#8, lines#24, wsl#80,
11298 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11299 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11300 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
11301 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
11302 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11303 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11304 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
11305 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
11306 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
11307 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
11308 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
11309 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
11310 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
11311 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
11312 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
11313 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
11314 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
11315 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
11316 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
11317 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
11318 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
11319 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
11320 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
11321 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
11322 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
11323 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
11324 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
11325 %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11326 sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
11327 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11328 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
11329 vpa=\E[%i%p1%dd, use=vt220+keypad,
11331 # Wyse 520 with 24 data lines and status (terminal status)
11332 wy520-24|wyse520-24|wyse 520 with 24 data lines,
11334 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11337 # Wyse 520 with visual bell.
11338 wy520-vb|wyse520-vb|wyse 520 with visible bell,
11339 flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
11341 # Wyse 520 in 132-column mode.
11342 wy520-w|wyse520-w|wyse 520 in 132-column mode,
11344 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11345 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
11347 # Wyse 520 in 132-column mode with visual bell.
11348 wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
11349 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
11352 # Wyse 520 emulating a vt420 7 bit mode.
11353 # The DEL key is programmed to generate BS in is2.
11354 # With EPC keyboard.
11355 # - 'End' key will clear till end of line on EPC keyboard
11356 # - Shift/End : ignored.
11357 # - Insert : enter insert mode.
11358 # - Delete : delete a character (have to change interrupt character
11359 # to CTRL-C: stty intr '^c') for it to work since the
11360 # Delete key sends 7FH.
11361 wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
11362 kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
11363 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
11366 # Wyse 520 with 24 data lines and status (terminal status)
11367 # with EPC keyboard.
11368 wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
11370 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
11373 # Wyse 520 with visual bell.
11374 wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
11375 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
11377 # Wyse 520 in 132-column mode.
11378 wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
11380 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
11381 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
11383 # Wyse 520 in 132-column mode with visual bell.
11384 wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
11385 flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
11387 # Wyse 520 in 80-column, 36 lines
11388 wy520-36|wyse520-36|wyse 520 with 36 data lines,
11391 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
11394 # Wyse 520 in 80-column, 48 lines
11395 wy520-48|wyse520-48|wyse 520 with 48 data lines,
11398 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
11401 # Wyse 520 in 132-column, 36 lines
11402 wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
11405 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
11408 # Wyse 520 in 132-column, 48 lines
11409 wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
11412 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
11416 # Wyse 520 in 80-column, 36 lines with EPC keyboard
11417 wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
11420 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
11423 # Wyse 520 in 80-column, 48 lines with EPC keyboard
11424 wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
11427 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
11430 # Wyse 520 in 132-column, 36 lines with EPC keyboard
11431 wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
11434 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
11437 # Wyse 520 in 132-column, 48 lines with EPC keyboard
11438 wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
11441 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
11444 # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
11445 # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
11446 # file and we don't know what <hts> is -- esr)
11447 wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
11449 cols#80, it#8, lines#24,
11450 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
11451 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
11452 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
11453 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
11454 kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
11455 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
11458 wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
11459 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
11460 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11461 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
11464 # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
11465 wy100q|Wyse 100 for Quotron,
11467 cols#80, lines#24, xmc#1,
11468 cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
11469 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
11470 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
11471 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
11472 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
11474 #### Kermit terminal emulations
11476 # Obsolete Kermit versions may be listed in the section describing obsolete
11477 # non-ANSI terminal emulators later in the file.
11480 # KERMIT standard all versions.
11481 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
11482 # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
11483 # From: greg small <gts@populi.berkeley.edu> 9-25-84
11484 kermit|standard kermit,
11487 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
11488 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
11489 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
11490 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
11491 kermit-am|standard kermit plus auto-margin,
11493 is2=K1 Standard Kermit plus Automatic Margins\n,
11495 # IBMPC Kermit 1.2.
11496 # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
11497 # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
11499 # From: greg small <gts@populi.berkeley.edu> 8-30-84
11500 pckermit|pckermit12|UCB IBMPC Kermit 1.2,
11503 clear=\EH\EJ, ed@, el@,
11504 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
11505 # IBMPC Kermit 1.20
11506 # Cannot use line 25, now acts funny like ansi special scrolling region.
11507 # Initialization must escape from that region by cursor position to line 24.
11508 # Cannot use character insert because 1.20 goes crazy if insert at col 80.
11509 # Does not use :am: because autowrap is lost when kermit dropped and restarted.
11510 # From: greg small <gts@populi.berkeley.edu> 12-19-84
11511 pckermit120|UCB IBMPC Kermit 1.20,
11513 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
11515 is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
11517 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
11518 # MS-DOS Kermit 2.27 for the IBMPC
11519 # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
11520 # Cannot use line 25, now acts funny like ansi special scrolling region.
11521 # Initialization must escape from that region by cursor position to line 24.
11522 # Does not use am: because autowrap is lost when kermit dropped and restarted.
11523 # Reverse video for standout like H19.
11524 # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
11525 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11526 msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
11528 cols#80, it#8, lines#24,
11529 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
11530 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
11531 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
11532 home=\EH, ht=^I, il1=\EL,
11533 is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
11534 \sIBMPC\s3-17-85\n,
11535 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
11536 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
11537 # MS-DOS Kermit 2.27 with automatic margins
11538 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11539 msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
11541 cvvis=\EO\Eq\EG\EvK5,
11542 is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
11543 \smargins\s3-17-85\n,
11545 # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
11546 # Automatic margins now default. Use ansi <sgr> for highlights.
11547 # Define function keys.
11548 # (msk22714: removed obsolete ":kn#10:" -- esr)
11549 # From: greg small <gts@populi.berkeley.edu> 3-17-85
11550 msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
11552 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
11553 is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
11554 \sIBM\sPC\s3-17-85\n,
11555 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
11556 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
11557 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
11558 # This was designed for a VT320 emulator, but it is probably a good start
11559 # at support for the VT320 itself.
11560 # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
11561 # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
11562 vt320-k3|MS-Kermit 3.00's vt320 emulation,
11563 am, eslok, hs, km, mir, msgr, xenl,
11564 cols#80, it#8, lines#49, pb#9600, vt#3,
11565 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11566 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
11567 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=\r,
11568 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11569 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11570 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11571 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11572 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
11573 flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
11575 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
11576 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
11577 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
11578 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
11579 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
11580 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
11581 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8,
11582 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
11583 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
11584 rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
11585 \E[4i\E[?4i\E[m\E[r\E[2$~,
11586 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
11587 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
11588 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
11589 # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
11590 # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
11591 # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
11592 vt320-k311|dec vt320 series as defined by kermit 3.11,
11593 am, eslok, hs, mir, msgr, xenl, xon,
11594 cols#80, it#8, lines#24, vt#3,
11595 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11596 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
11597 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=\r,
11598 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11599 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11600 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11601 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
11602 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
11603 flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
11604 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
11606 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
11607 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
11608 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
11609 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
11610 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
11611 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
11612 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
11613 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
11614 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
11615 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
11617 ######## NON-ANSI TERMINAL EMULATIONS
11622 # These entries attempt to describe Avatar, a terminal emulation used with
11623 # MS-DOS bulletin-board systems. It was designed to give ANSI-like
11624 # capabilities, but with cheaper (shorter) control sequences. Messy design,
11625 # excessively dependent on PC idiosyncrasies, but apparently rather popular
11626 # in the BBS world.
11628 # No color support. Avatar doesn't fit either of the Tektronix or HP color
11629 # models that terminfo knows about. An Avatar color attribute is the
11630 # low 7 bits of the IBM-PC display-memory attribute. Bletch.
11632 # I wrote these entries while looking at the Avatar spec. I don't have
11633 # the facilities to test them. Let me know if they work, or don't.
11635 # Avatar escapes not used by these entries (because maybe you're smarter
11636 # and more motivated than I am and can figure out how to wrap terminfo
11637 # around some of them, and because they are weird enough to be funny):
11639 # ^L -- clear window/reset current attribute to default
11640 # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
11642 # bit: 6 5 4 3 2 1 0
11644 # +---+---+ | +---+---+
11646 # | | foreground color
11647 # | foreground intensity
11650 # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
11651 # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
11652 # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
11653 # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
11654 # (^V^L and ^V^M set the current attribute as a side-effect.)
11655 # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
11656 # in the pattern, <c> the number of times the pattern
11657 # should be repeated. If either value is 0, no-op.
11658 # The pattern can contain Avatar console codes,
11659 # including other ^V ^Y patterns.
11661 # ^V^O -- clockwise mode on; turn print direction right each time you
11662 # hit a window edge (yes, really). Turned off by CR
11664 # ^V^Q%c -- query the driver
11665 # ^V^R -- driver reset
11666 # ^V^S -- Sound tone (PC-specific)
11667 # ^V^T -- change highlight at current cursor position to %c
11668 # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
11669 # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
11672 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11673 # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
11674 # tell ncurses that the corresponding highlights exist; it should use <sgr>,
11675 # which is the only method that will actually work for multiple highlights.)
11677 # Update by TD - 2004: half of this was inconsistent. Found documentation
11678 # and repaired most of the damage. sgr0 is probably incorrect, but the
11679 # available documentation gives no clues for a workable string.
11680 avatar0|avatar terminal emulator level 0,
11682 cols#80, it#8, lines#25,
11683 blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
11684 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
11685 ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
11687 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
11688 %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
11689 %{16}%|%;%;%c%;%?%p4%t\026\002%;,
11690 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
11692 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11693 avatar0+|avatar terminal emulator level 0+,
11694 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
11695 # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
11696 avatar|avatar1|avatar terminal emulator level 1,
11697 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
11698 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
11702 # RBComm is a lean and mean terminal emulator written by the Interrupt List
11703 # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
11704 # '90s), especially in the BBS world, and still has some loyal users due to
11705 # its very small memory footprint and to a cute macro language.
11706 rbcomm|IBM PC with RBcomm and EMACS keybindings,
11707 am, bw, mir, msgr, xenl,
11708 cols#80, it#8, lines#25,
11709 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
11710 clear=^L, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
11711 cub1=^H, cud1=^C, cuf1=^B,
11712 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
11713 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
11714 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
11715 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
11716 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
11717 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
11718 rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
11719 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
11720 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
11721 rbcomm-nam|IBM PC with RBcomm without autowrap,
11723 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
11724 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
11725 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
11726 rbcomm-w|IBM PC with RBcomm in 132 column mode,
11728 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
11729 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
11730 kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
11732 ######## LCD DISPLAYS
11735 #### Matrix Orbital
11736 # from: Eric Z. Ayers (eric@ale.org)
11738 # Matrix Orbital 20x4 LCD display
11739 # Command Character is 0xFE (decimal 254, octal 376)
11741 # On this device, cursor addressability isn't possible. The LCD expects:
11742 # 0xfe G <col> <row>
11743 # for cup: %p1 == row and %p2 is column
11746 # cup=\376G%p2%c%p1%c
11747 # LOOKS like it will work, but sometimes only one of the two numbers is sent.
11748 # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
11750 # Alas, there is no cursor upline capability on this display.
11752 # These entries add some 'sanity stuff' to the clear function. That is, it
11753 # does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
11754 # and turns off the cursor blinking and stuff like that.
11756 # NOTE: calling 'beep' turns on the backlight (bell)
11757 # NOTE: calling 'flash' turns it on and back off (visual bell)
11759 MtxOrb|Generic Matrix Orbital LCD display,
11760 bel=\376B\001, clear=\376X\376C\376R\376K\376T,
11761 cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
11762 flash=\376B\001$<200>\376F, home=\376H,
11763 MtxOrb204|20x4 Matrix Orbital LCD display,
11764 cols#20, lines#4, use=MtxOrb,
11765 MtxOrb162|16x2 Matrix Orbital LCD display,
11766 cols#16, lines#2, use=MtxOrb,
11769 ######## OLDER TERMINAL TYPES
11771 # This section is devoted to older commercial terminal brands that are now
11772 # discontinued, but known to be still in use or represented by emulations.
11775 #### AT&T (att, tty)
11777 # This section also includes Teletype-branded VDTs.
11779 # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
11780 # Boundless Technologies); for details, see the header comment on the ADDS
11783 # These are AT&T's official terminfo entries. All-caps aliases have been
11786 att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
11787 am, eo, mir, msgr, xon,
11788 cols#80, it#8, lines#24,
11789 bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
11790 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
11791 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
11792 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
11793 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
11794 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
11795 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
11796 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
11797 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
11798 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
11799 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
11800 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
11801 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
11803 att2350|AT&T 2350 Video Information Terminal 80 column mode,
11804 mc0@, mc4@, mc5@, use=att2300,
11806 # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
11807 # Seems upward compatible with vt100, plus ins/del line/char.
11808 # On sgr, the protection parameter is ignored.
11809 # No check is made to make sure that only 3 parameters are output.
11810 # standout= reverse + half-intensity = 3 | 5.
11811 # bold= reverse + underline = 2 | 3.
11812 # note that half-bright blinking doesn't look different from normal blinking.
11813 # NOTE:you must program the function keys first, label second!
11814 # (att4410: a BSD entry has been seen with the following capabilities:
11815 # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
11816 # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
11817 att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
11818 am, hs, mir, msgr, xon,
11819 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
11820 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
11822 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
11823 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
11824 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
11825 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
11826 ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
11827 is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
11828 \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
11829 \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
11830 \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
11831 \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
11832 \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
11834 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11835 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
11836 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
11837 ll=\E[24H, nel=\r\n,
11838 pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
11840 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
11841 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
11843 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
11844 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
11845 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
11846 tsl=\E7\E[25;%p1%{1}%+%dH,
11848 att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
11850 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
11852 att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
11854 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
11857 att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
11859 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
11861 # 5410 in terms of a vt100
11862 # (v5410: added <rmam>/<smam> based on init string -- esr)
11863 v5410|att5410 in terms of a vt100,
11864 am, mir, msgr, xon,
11865 cols#80, it#8, lines#24, vt#3,
11866 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11867 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
11868 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
11869 cub1=^H, cud1=\n, cuf1=\E[C$<2>,
11870 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
11871 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
11872 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
11873 il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
11874 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
11875 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
11876 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
11878 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
11879 %;m%?%p9%t\016%e\017%;$<2>,
11880 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
11881 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
11885 # Teletype Model 5420 -- A souped up 5410, with multiple windows,
11886 # even! the 5420 has three modes: scroll, window or page mode
11887 # this terminfo should work in scroll or window mode, but doesn't
11888 # take advantage of any of the differences between them.
11890 # Has memory below (2 lines!)
11891 # 3 pages of memory (plus some spare)
11892 # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
11893 # <hpa>, <hts> would work for these, but these work in both scroll and window
11894 # mode... Unset insert character so insert mode works
11895 # <is1> sets 80 column mode,
11896 # <is2> escape sequence:
11897 # 1) turn off all fonts
11898 # 2) function keys off, keyboard lock off, control display off,
11899 # insert mode off, erasure mode off,
11900 # 3) full duplex, monitor mode off, send graphics off, nl on lf off
11901 # 4) reset origin mode
11902 # 5) set line wraparound
11903 # 6) exit erasure mode, positional attribute mode, and erasure extent mode
11905 # 8) program ENTER to transmit ^J,
11906 # We use \212 to program the ^J because a bare ^J will get translated by
11907 # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
11909 # <is3> set screen color to black,
11910 # No representation in terminfo for the delete word key: kdw1=\Ed
11911 # Key capabilities assume the power-up send sequence...
11912 # This <rmcup> is not strictly necessary, but it helps maximize
11913 # memory usefulness: <rmcup=\Ez>,
11914 # Alternate sgr0: <sgr0=\E[m\EW^O>,
11915 # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
11916 # smkx programs the SYS PF keys to send a set sequence.
11917 # It also sets up labels f1, f2, ..., f8, and sends edit keys.
11918 # This string causes them to send the strings <kf1>-<kf8>
11919 # when pressed in SYS PF mode.
11920 # (att4415: I added <rmam>/<smam> based on the init string -- esr)
11921 att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
11922 OTbs, db, mir, xon,
11923 lh#2, lm#78, lw#8, nlab#8, wsl#55,
11924 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
11925 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
11926 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
11927 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
11928 flash=\E[?5h$<200>\E[?5l, home=\E[x,
11929 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
11930 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
11931 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
11932 \E[4i\Ex\E[21;1j\212,
11933 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
11934 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
11935 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
11936 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
11937 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
11938 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
11939 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
11940 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
11941 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
11942 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
11943 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
11944 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
11945 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
11946 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
11947 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
11948 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
11951 att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
11952 cols#132, lm#54, wsl#97,
11953 is1=\E[?3h$<100>, use=att4415,
11955 att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
11956 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
11958 att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
11959 cols#132, lm#54, wsl#97,
11960 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
11963 # Note that this mode permits programming USER PF KEYS and labels
11964 # However, when you program user pf labels you have to reselect
11965 # user pf keys to make them appear!
11966 att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
11967 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
11968 pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
11970 pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
11972 att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
11973 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11976 att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
11977 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11980 att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
11981 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11984 att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
11985 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
11988 att5420_2|AT&T 5420 model 2 80 cols,
11989 am, db, hs, mir, msgr, xon,
11990 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
11991 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
11992 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
11993 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
11994 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
11995 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
11996 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
11997 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
11998 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
11999 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
12000 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12001 indn=\E[%p1%dE, invis=\E[8m,
12002 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
12003 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
12005 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
12006 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
12007 kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
12008 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
12009 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
12010 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
12011 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
12012 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
12013 pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
12015 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
12016 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
12017 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
12019 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
12020 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12021 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
12022 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
12023 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
12024 att5420_2-w|AT&T 5420 model 2 in 132 column mode,
12026 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
12027 \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
12031 att4418|att5418|AT&T 5418 80 cols,
12034 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12035 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD,
12036 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12037 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12038 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
12039 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
12040 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n,
12041 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
12042 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
12043 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
12044 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
12045 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
12046 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
12047 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
12048 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
12049 att4418-w|att5418-w|AT&T 5418 132 cols,
12051 is1=\E[?3h, use=att5418,
12053 att4420|tty4420|teletype 4420,
12054 OTbs, da, db, eo, msgr, ul, xon,
12055 cols#80, lines#24, lm#72,
12056 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
12057 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
12058 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
12059 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
12060 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
12061 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
12062 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
12063 rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
12065 # The following is a terminfo entry for the Teletype 4424
12066 # asynchronous keyboard-display terminal. It supports
12067 # the vi editor. The terminal must be set up as follows,
12069 # HIGHLIGHT DEFINITION 3-TONE
12070 # DISPLAY FUNCTION GROUP III
12072 # The second entry below provides limited (a la adm3a)
12073 # operation under GROUP II.
12075 # This must be used with DISPLAY FUNCTION GROUP I or III
12076 # and HIGHLIGHT DEFINITION 3-TONE
12077 # The terminal has either bold or blink, depending on options
12079 # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
12080 att4424|tty4424|teletype 4424,
12083 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12084 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
12085 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12086 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
12087 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
12088 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
12089 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
12090 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h,
12091 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12092 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
12093 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
12095 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|
12096 %t;5%;%?%p5%t;0%;m,
12097 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
12100 att4424-1|tty4424-1|teletype 4424 in display function group I,
12101 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
12104 # This entry is not one of AT&T's official ones, it was translated from the
12105 # 4.4BSD termcap file. The highlight strings are different from att4424.
12106 # I have no idea why this is -- older firmware version, maybe?
12107 # The following two lines are the comment originally attached to the entry:
12108 # This entry appears to avoid the top line - I have no idea why.
12109 # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
12110 att4424m|tty4424m|teletype 4424M,
12112 cols#80, it#8, lines#23,
12113 bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
12114 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
12115 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
12116 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
12117 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12118 kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m,
12119 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
12121 # The Teletype 5425 is really version 2 of the Teletype 5420. It
12122 # is quite similar, except for some minor differences. No page
12123 # mode, for example, so all of the <cup> sequences used above have
12124 # to change back to what's being used for the 5410. Many of the
12125 # option settings have changed their numbering as well.
12127 # This has been tested on a preliminary model.
12129 # (att5425: added <rmam>/<smam> based on the init string -- esr)
12130 att5425|tty5425|att4425|AT&T 4425/5425,
12131 am, da, db, hs, mir, msgr, xenl, xon,
12132 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
12133 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12134 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12135 clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
12136 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12137 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12138 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12139 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12140 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
12141 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
12142 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
12143 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12144 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
12145 invis=\E[8m, is1=\E<\E[?3l$<100>,
12146 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
12147 \E[4i\Ex\E[25;1j\212,
12148 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
12149 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12150 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
12151 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
12152 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
12153 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
12155 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12156 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
12157 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
12158 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
12159 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
12160 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12161 %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
12162 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12163 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
12164 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
12165 vpa=\E[%p1%{1}%+%dd,
12167 att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
12168 smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
12170 att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
12171 cols#132, lm#54, wsl#97,
12172 is1=\E[?3h$<100>, use=tty5425,
12174 # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
12175 # I also added <rmam>/<smam> -- esr)
12176 att4426|tty4426|teletype 4426S,
12178 cols#80, lines#24, lm#48,
12179 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12180 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
12181 cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
12182 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12183 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
12184 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
12185 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
12186 il=\E[%p1%dL, il1=\EL, ind=\n, indn=\E[%p1%dS,
12187 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
12188 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
12189 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
12190 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
12191 nel=\r\n, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
12192 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
12193 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
12194 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
12197 # Terminfo entry for the AT&T 510 A Personal Terminal
12198 # Function keys 9 - 16 are available only after the
12199 # screen labeled (soft keys/action blocks) are labeled. Function key
12200 # 9 corresponds to the leftmost touch target on the screen,
12201 # function key 16 corresponds to the rightmost.
12203 # This entry is based on one done by Ernie Rice at Summit, NJ and
12204 # changed by Anne Gallup, Skokie, IL, ttrdc!anne
12205 att510a|bct510a|AT&T 510A Personal Terminal,
12206 am, mir, msgr, xenl, xon,
12207 cols#80, lh#2, lines#24, lw#7, nlab#8,
12208 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12209 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12210 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r,
12211 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12212 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12213 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
12214 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
12215 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
12216 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l,
12217 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
12218 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
12219 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
12220 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
12221 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
12222 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
12223 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
12224 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
12225 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12226 %|%t;7%;m%?%p9%t\016%e\017%;,
12227 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
12228 smul=\E[4m, tbc=\E[3g,
12230 # Terminfo entry for the AT&T 510 D Personal Terminal
12231 # Function keys 9 through 16 are accessed by bringing up the
12233 # Function key 9 corresponds to the leftmost touch target on the screen,
12234 # function key 16 corresponds to the rightmost.
12236 # There are problems with soft key labeling. These are due to
12237 # strangenesses in the native terminal that are impossible to
12238 # describe in a terminfo.
12239 att510d|bct510d|AT&T 510D Personal Terminal,
12240 am, da, db, mir, msgr, xenl, xon,
12241 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
12242 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12243 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12244 clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD,
12245 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
12246 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
12247 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
12248 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
12249 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
12250 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
12251 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
12252 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
12253 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
12254 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
12255 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
12256 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
12257 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
12258 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
12259 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
12260 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
12261 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
12262 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
12263 rs2=\E[5;0|, sc=\E7,
12264 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
12265 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12266 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
12267 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
12268 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12270 # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
12271 att500|att513|AT&T 513 using page mode,
12272 am, chts, mir, msgr, xenl, xon,
12273 cols#80, lh#2, lines#24, lw#8, nlab#8,
12274 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
12275 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
12276 clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
12277 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12278 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
12279 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12280 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
12281 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12282 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
12283 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
12284 indn=\E[%p1%dE, invis=\E[8m,
12285 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
12286 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12287 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12288 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
12289 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
12290 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
12291 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
12292 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
12293 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12294 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
12295 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
12296 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
12297 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
12298 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
12299 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
12300 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
12301 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
12302 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
12304 pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12306 pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
12308 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
12309 pln=\E[%p1%dp%p2%:-16s, rc=\E8,
12310 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
12311 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
12312 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
12314 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
12315 \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
12316 rs2=\E[5;0|, sc=\E7,
12317 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
12318 %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12319 sgr0=\E[m\017, smacs=^N, smir=\E[4h,
12320 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
12321 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
12324 # printer must be set to EMUL ANSI to accept ESC codes
12325 # <cuu1> stops at top margin
12326 # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
12327 # and alt font ascii,wrap on,tabs cleared
12328 # <is2> disables newline on LF,Emphasized off
12329 # The <u0> capability sets form length
12330 att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
12332 bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10,
12333 orhi#100, orl#12, orvi#72,
12334 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
12335 %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
12336 %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
12339 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
12340 nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
12341 %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
12342 %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
12343 %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
12344 y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
12346 cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
12347 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
12348 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
12349 %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
12351 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
12352 %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
12353 %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
12354 \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
12355 \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
12357 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
12358 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
12359 u0=\E[%p1%dt, vpa=\E[%p1%dd,
12361 # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
12362 # The following SET-UP modes are assumed for normal operation:
12363 # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
12364 # Other SET-UP modes may be set for operator convenience or communication
12365 # requirements. This termcap description is for the Resident Terminal Mode.
12366 # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12367 # The BRL entry also said: UNSAFE :ll=\E[70H:
12368 att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
12370 cols#88, it#8, lines#70, vt#3,
12371 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
12372 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
12373 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
12374 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
12375 il1=\E[L, ind=\n, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
12376 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12377 kll=\E[70;1H, nel=\r\n, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
12380 # 5620 terminfo (2.0 or later ROMS with char attributes)
12381 # The following SET-UP modes are assumed for normal operation:
12382 # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
12383 # Other SET-UP modes may be set for operator convenience or communication
12384 # requirements. This termcap description is for Resident Terminal Mode. No
12385 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12386 # assumptions: <ind> (scroll forward one line) is only done at screen bottom
12387 # Be aware that older versions of the dmd have a firmware bug that affects
12388 # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
12389 # <msgr> is from an otherwise inferior BRL for this terminal. That entry
12390 # also has <ll>=\E[70H commented out and marked unsafe.
12391 # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
12392 att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
12393 OTbs, am, msgr, npc, xon,
12394 cols#88, it#8, lines#70,
12395 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
12396 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12397 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
12398 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
12399 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
12400 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
12401 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\n,
12402 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
12403 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
12404 sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
12405 att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
12406 lines#24, use=att5620,
12407 att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
12408 lines#34, use=att5620,
12409 # 5620 layer running the "S" system's downloaded graphics handler:
12410 att5620-s|tty5620-s|layer|vitty|5620 S layer,
12412 cols#80, it#8, lines#72,
12413 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
12414 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
12415 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J,
12416 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
12419 # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
12421 # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
12422 # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
12423 att605|AT&T 605 80 column 102key keyboard,
12425 cols#80, lines#24, lw#8, nlab#8, wsl#80,
12426 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12427 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
12428 cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
12429 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
12430 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
12431 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12432 il1=\E[L, ind=\n, invis=\E[8m,
12433 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
12434 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
12435 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12436 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
12437 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
12438 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
12439 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
12440 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
12441 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
12442 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
12443 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
12444 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
12445 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
12446 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
12447 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12448 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12449 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12450 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
12451 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
12452 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
12453 tsl=\E7\E[25;%i%p1%dx,
12454 att605-pc|ATT 605 in pc term mode,
12455 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
12457 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
12458 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
12459 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
12460 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
12461 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
12462 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
12463 rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
12464 xoffc=g, xonc=e, use=att605,
12465 att605-w|AT&T 605-w 132 column 102 key keyboard,
12467 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
12468 # (att610: I added <rmam>/<smam> based on the init string. I also
12469 # added <indn> and <rin> because the BSD file says the att615s have them,
12470 # and the 615 is like a 610 with a big keyboard, and most of their other
12471 # smart terminals support the same sequence -- esr)
12472 att610|AT&T 610; 80 column; 98key keyboard,
12473 am, eslok, hs, mir, msgr, xenl, xon,
12474 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12475 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12476 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12477 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
12478 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12479 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12480 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12481 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12482 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12483 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
12484 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12485 indn=\E[%p1%dS, invis=\E[8m,
12486 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
12487 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
12488 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12489 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
12490 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
12491 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12492 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
12494 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12495 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12496 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
12497 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
12498 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12499 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12500 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12501 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
12502 att610-w|AT&T 610; 132 column; 98key keyboard,
12504 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12507 att610-103k|AT&T 610; 80 column; 103key keyboard,
12508 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12509 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12510 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
12511 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
12512 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
12513 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
12514 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
12515 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
12516 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
12517 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
12518 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
12519 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
12520 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
12521 att610-103k-w|AT&T 610; 132 column; 103key keyboard,
12523 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12525 att615|AT&T 615; 80 column; 98key keyboard,
12526 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
12527 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
12528 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
12529 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
12530 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
12531 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
12532 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
12533 att615-w|AT&T 615; 132 column; 98key keyboard,
12534 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
12535 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
12536 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
12537 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
12538 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
12539 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
12540 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
12541 att615-103k|AT&T 615; 80 column; 103key keyboard,
12542 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
12543 att615-103k-w|AT&T 615; 132 column; 103key keyboard,
12544 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
12545 # (att620: I added <rmam>/<smam> based on the init string and
12546 # <rin>/<indn> from a BSD termcap -- esr)
12547 att620|AT&T 620; 80 column; 98key keyboard,
12548 am, eslok, hs, mir, msgr, xenl, xon,
12549 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12550 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12551 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12552 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
12553 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12554 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12555 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12556 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12557 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12558 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
12559 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12560 indn=\E[%p1%dS, invis=\E[8m,
12561 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
12562 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
12563 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12564 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
12565 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
12566 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
12567 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
12568 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
12569 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
12570 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
12571 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
12572 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
12573 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
12574 mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12575 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
12576 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
12577 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
12578 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
12579 rs2=\Ec\E[?3l, sc=\E7,
12580 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12581 %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
12582 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
12583 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
12584 tsl=\E7\E[25;%i%p1%dx,
12585 att620-w|AT&T 620; 132 column; 98key keyboard,
12587 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12589 att620-103k|AT&T 620; 80 column; 103key keyboard,
12590 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
12591 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
12592 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
12593 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
12594 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
12595 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
12596 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
12597 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
12598 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
12599 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
12600 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
12601 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
12602 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
12603 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
12604 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
12605 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
12607 att620-103k-w|AT&T 620; 132 column; 103key keyboard,
12609 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
12612 # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
12613 # The following SETUP modes are assumed for normal operation:
12614 # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
12615 # Font_Size=Large Non-Layers_Window_Cols=80
12616 # Non-Layers_Window_Rows=60
12617 # Other SETUP modes may be set for operator convenience or communication
12618 # requirements. Some capabilities assume a printer attached to the Aux EIA
12619 # port. This termcap description is for the Fixed Non-Layers Window. No
12620 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
12621 # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
12622 att630|AT&T 630 windowing terminal,
12623 OTbs, am, da, db, mir, msgr, npc, xon,
12624 cols#80, it#8, lines#60, lm#0,
12625 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r,
12626 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
12627 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12628 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
12629 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
12630 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
12631 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
12632 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
12633 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=\r,
12634 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
12635 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
12636 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
12637 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
12638 mc5=\E[?5i, nel=\r\n, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
12639 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
12640 rmul=\E[m, rs2=\Ec, sc=\E7,
12641 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
12643 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
12644 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
12645 lines#24, use=att630,
12647 # This is the att700 entry for 700 native emulation of the AT&T 700
12648 # terminal. Comments are relative to changes from the 605V2 entry and
12649 # att730 on which the entry is based. Comments show the terminfo
12650 # capability name, termcap name, and description.
12652 # Here is what's going onm in the init string:
12653 # ESC [ 50;4| set 700 native mode (really is 605)
12654 # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
12655 # ESC [ 53;0| set GenFlow to Xon/Xoff
12656 # ESC [ 8 ;0| set CR on NL
12657 # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
12658 # ESC [ ? 4 l jump scroll
12659 # ESC [ ? 5 l/h video: normal (l); reverse (h)
12660 # ESC [ ?13 l Labels on
12661 # ESC [ ?15 l parity check = no
12662 # ESC [ 13 l monitor mode off
12663 # ESC [ 20 l LF on NL (not CRLF on NL)
12664 # ESC [ ? 7 h autowrap on
12665 # ESC [ 12 h local echo off
12666 # ESC ( B GO = ASCII
12667 # ESC ) 0 G1 = Special Char & Line Drawing
12668 # ESC [ ? 31 l Set 7 bit controls
12670 # Note: Most terminals, especially the 600 family use Reverse Video for
12671 # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
12672 # Assume we should stay with reverse video for 70.. However, the 605V2 exits
12673 # standout mode with \E[m (all normal attributes). The 730 entry simply
12674 # exits reverse video which would leave other current attributes intact. It
12675 # was assumed the 730 entry to be more correct so rmso has changed. The
12676 # 605V2 has no sequences to turn individual attributes off, thus its setting
12677 # and the rmso/smso settings from the 730.
12679 # Note: For the same reason as above in rmso I changed exit under-score mode
12680 # to specifically turn off underscore, rather than return to all normal
12683 # Note: The following pkey_xmit is taken from the 605V2 which contained the
12684 # capability as pfxl. It was changed here to pfx since pfxl
12685 # will only compile successfully with Unix 4.0 tic. Also note that pfx only
12686 # allows strings to be parameters and label values must be programmed as
12687 # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
12688 # and strings to be parameters. The 605V2 pfx entry should be examined later
12689 # in this regard. For reference the 730 pfxl entry is shown here for comparison
12691 # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
12692 # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
12695 # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
12698 # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
12700 # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
12704 # modular 10 pin Connector
12705 # Left side Right side
12706 # Pin 1 2 3 4 5 6 7 8 9 10
12708 # Key (notch) at bottom
12720 # The manual is 189 pages and is loaded with details about the escape codes,
12721 # etc..... Available from AT&T CIC 800-432-6600...
12722 # ask for Document number 999-300-660..
12724 att700|AT&T 700 24x80 column display w/102key keyboard,
12725 am, eslok, hs, mir, msgr, xenl, xon,
12726 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
12727 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12728 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12729 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
12730 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12731 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12732 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12733 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12734 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12735 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
12736 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
12737 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
12738 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
12739 \E(B\E)0\E[?31l\E[0m\017,
12740 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
12741 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12742 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
12743 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
12744 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
12745 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
12746 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
12747 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
12748 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
12749 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
12750 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
12751 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12752 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
12753 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12754 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
12755 \s\s\s\s\s\s%;%p2%s,
12756 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
12757 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
12758 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
12759 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
12760 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12761 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12762 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
12763 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
12764 tsl=\E7\E[99;%i%p1%dx,
12766 # This entry was modified 3/13/90 by JWE.
12767 # fixes include additions of <enacs>, correcting <rep>, and modification
12768 # of <kHOM>. (See comments below)
12769 # att730 has status line of 80 chars
12770 # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
12771 # the <kf25> and up keys are used for shifted system Fkeys
12772 # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
12773 # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
12774 # and 122 key keyboards, the 730's translation is \E[2J. For consistency
12775 # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
12776 # 102, 102+1, or 122 key keyboards
12778 # (att730: I added <rmam>/<smam> based on the init string -- esr)
12779 att730|AT&T 730 windowing terminal,
12780 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
12781 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
12782 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12783 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
12784 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=\r,
12785 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
12786 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12787 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
12788 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
12789 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
12790 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
12791 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
12792 ind=\ED, invis=\E[8m,
12793 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
12794 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
12795 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
12796 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
12797 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
12798 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
12799 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
12800 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
12801 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
12802 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
12803 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
12804 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
12805 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
12806 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
12807 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
12808 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
12809 %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
12810 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
12811 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
12812 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
12813 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
12814 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
12815 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
12816 %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
12817 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
12818 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
12819 swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
12820 att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
12821 lines#41, use=att730,
12822 att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
12823 lines#24, use=att730,
12824 att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
12825 flash=\E[?5l$<200>\E[?5h,
12826 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
12827 att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
12828 lines#41, use=att730r,
12829 att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
12830 lines#24, use=att730r,
12832 # The following represents the screen layout along with the associated
12833 # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
12834 # not appear on the screen but are shown to reference the bezel buttons.
12835 # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
12836 # position relative to the screen.
12840 # +----------------------------------------------------------------+
12842 # XXXX | kf0 kf24 | XXXX
12845 # XXXX | kf1 kf23 | XXXX
12848 # XXXX | kf2 kf22 | XXXX
12851 # XXXX | kf3 kf21 | XXXX
12854 # XXXX | kf4 kf20 | XXXX
12857 # XXXX | kf5 kf19 | XXXX
12860 # XXXX | kf6 kf18 | XXXX
12866 # +----------------------------------------------------------------+
12868 # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
12870 # Note: XXXX represents the screen buttons
12876 # The character string sent by key 'kf26' may be user programmable
12877 # to send either \E[16s, or \E[26s.
12878 # The character string sent by key 'krfr' may be user programmable
12879 # to send either \E[17s, or \E[27s.
12881 # Depression of the "CMD" key sends \E! (kcmd)
12882 # Depression of the "MAIL" key sends \E[26s (kf26)
12883 # "REDRAW" same as "REFRESH" (krfr)
12885 # "kf" functions adds carriage return to output string if terminal is in
12888 # The following are functions not covered in the table above:
12890 # Set keyboard character (SKC): \EPn1;Pn2w
12891 # Pn1= 0 Back Space key
12893 # Pn2= Program char (hex)
12895 # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
12896 # Pn1= Window number (1-39)
12897 # Pn2-Pn5= Y;X;Y;X coordinates
12899 # Screen Selection (SSL): \E[Pnu
12900 # Pn= Window number
12902 # Set Terminal Modes (SM): \E[Pnh
12903 # Pn= 3 Graphics mode
12904 # Pn= > Cursor blink
12905 # Pn= < Enter new line mode
12906 # Pn= = Enter reverse insert/replace mode
12907 # Pn= ? Enter no scroll mode
12909 # Reset Terminal Mode (RM): \E[Pnl
12910 # Pn= 3 Exit graphics mode
12911 # Pn= > Exit cursor blink
12912 # Pn= < Exit new line mode
12913 # Pn= = Exit reverse insert/replace mode
12914 # Pn= ? Exit no scroll mode
12916 # Screen Status Report (SSR): \E[Pnp
12917 # Pn= 0 Request current window number
12918 # Pn= 1 Request current window dimensions
12920 # Device Status Report (DSR): \E[6n Request cursor position
12922 # Call Status Report (CSR): \E[Pnv
12923 # Pn= 0 Call failed
12924 # Pn= 1 Call successful
12926 # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
12927 # Pn1= Button number to be loaded
12928 # Pn2= Character count of "string"
12929 # Pn3= Key mode being loaded:
12933 # String= Text string (15 chars max)
12935 # Screen Number Report (SNR): \E[Pnp
12936 # Pn= Screen number
12938 # Screen Dimension Report (SDR): \E[Pn1;Pn2r
12939 # Pn1= Number of rows available in window
12940 # Pn2= Number of columns available in window
12942 # Cursor Position Report (CPR): \E[Pn1;Pn2R
12943 # Pn1= "Y" Position of cursor
12944 # Pn2= "X" Position of cursor
12946 # Request Answer Back (RAB): \E[c
12948 # Answer Back Response (ABR): \E[?;*;30;VSV
12949 # *= 0 No printer available
12950 # *= 2 Printer available
12951 # V= Software version number
12952 # SV= Software sub version number
12953 # (printer-available field not documented in v1)
12955 # Screen Alignment Aid: \En
12957 # Bell (lower pitch): \E[x
12959 # Dial Phone Number: \EPdstring\
12960 # string= Phone number to be dialed
12962 # Set Phone Labels: \EPpstring\
12963 # string= Label for phone buttons
12965 # Set Clock: \EPchour;minute;second\
12967 # Position Clock: \EPsY;X\
12968 # Y= "Y" coordinate
12969 # X= "X" coordinate
12971 # Delete Clock: \Epr\
12973 # Programming The Function Buttons: \EPfPn;string\
12974 # Pn= Button number (00-06, 18-24)
12975 # (kf00-kf06, kf18-kf24)
12976 # string= Text to sent on button depression
12978 # The following in version 2 only:
12980 # Request For Local Directory Data: \EPp12;\
12982 # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
12984 # Request for Local Directory Data in print format: \EPp13;\
12986 # Enable 'Prt on Line' mode: \022 (DC2)
12988 # Disable 'Prt on Line' mode: \024 (DC4)
12992 # The following Terminfo entry describes functions which are supported by
12993 # the AT&T 5430/pt505 terminal software version 2 and later.
12994 att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
12996 cols#80, it#8, lines#24,
12997 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
12998 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
12999 cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
13000 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13001 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13002 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13003 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
13004 il=\E[%p1%dL, il1=\E[L, ind=\n,
13005 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
13006 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
13007 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
13008 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
13009 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
13010 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
13011 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
13012 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
13013 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
13014 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
13016 # The following Terminfo entry describes functions which are supported by
13017 # the AT&T 5430/pt505 terminal software version 1.
13018 att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
13020 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
13021 tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
13022 lines#22, use=att505,
13024 #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
13025 # This cut mark helps make life less painful for people running ncurses tic
13026 # on machines with relatively little RAM. The file can be broken in half here
13027 # cleanly and compiled in sections -- no `use' references cross this cut
13031 #### Ampex (Dialogue)
13033 # Yes, these are the same people who are better-known for making audio- and
13034 # videotape. I'm told they are located in Redwood City, CA.
13037 # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
13038 # (ampex80: some capabilities merged in from SCO's entry -- esr)
13039 ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
13041 cols#80, it#8, lines#24,
13042 bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
13043 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13044 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
13045 ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
13046 smso=\Ej, smul=\El, tbc=\E3,
13047 # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
13048 ampex175|ampex d175,
13051 bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
13052 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13053 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
13054 is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
13055 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
13056 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
13057 # No backspace key in the main QWERTY cluster. Fortunately, it has a
13058 # NEWLINE/PAGE key just above RETURN that sends a strange single-character
13059 # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
13060 # mode), this key can be used as the erase key; I find I like this. Because
13061 # some people and some systems may not, there is another termcap ("ampex175")
13062 # that suppresses this little eccentricity by omitting the relevant capability.
13063 ampex175-b|ampex d175 using left arrow for erase,
13064 kbs=^_, use=ampex175,
13065 # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
13066 # (ampex210: removed obsolete ":kn#10:" -- esr)
13067 ampex210|a210|ampex a210,
13068 OTbs, am, hs, xenl,
13069 cols#80, it#8, lines#24, xmc#1,
13070 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
13071 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
13072 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
13073 fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
13074 if=/usr/share/tabset/std, il1=\EE, invis@,
13075 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
13076 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
13077 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
13078 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
13079 tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
13080 # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
13081 # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
13082 # and moved the padding to be *after* the caps -- esr)
13083 ampex219|ampex-219|amp219|Ampex with Automargins,
13085 cols#80, it#8, lines#24,
13086 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
13087 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
13088 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
13089 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
13090 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
13091 el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
13092 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
13093 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
13094 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
13095 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
13096 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
13097 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
13098 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
13099 ampex219w|ampex-219w|amp219w|Ampex 132 cols,
13100 cols#132, lines#24,
13101 bel=^G, cr=\r, cud1=\n, ind=\n,
13102 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
13103 # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
13104 ampex232|ampex-232|Ampex Model 232,
13106 cols#80, lines#24, xmc#1,
13107 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
13108 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
13109 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
13110 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
13111 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
13112 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
13113 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
13114 kf9=^AI\r, khome=^^, use=adm+sgr,
13115 # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
13116 ampex232w|Ampex Model 232 / 132 columns,
13117 cols#132, lines#24,
13118 is2=\E\034Eg\El, use=ampex232,
13120 #### Ann Arbor (aa)
13122 # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
13123 # numbers of function keys. At least some used monitors in portrait mode,
13124 # allowing up to 76-character screen heights! They were reachable at:
13126 # Ann Arbor Terminals
13127 # 6175 Jackson Road
13128 # Ann Arbor, MI 48103
13131 # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
13132 # can't be found on the Web; I fear they're long dead. R.I.P.
13136 # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
13137 # Highly modified 6/22 by Mike O'Brien.
13138 # split out into several for the various screen sizes by dave-yost@rand
13139 # Modifications made 3/82 by Mark Horton
13140 # Modified by Tom Quarles at UCB for greater efficiency and more diversity
13141 # status line moved to top of screen, <flash> removed 5/82
13142 # Some unknown person at SCO then hacked the init strings to make them more
13145 # assumes the following setup:
13146 # A menu: 0000 1010 0001 0000
13147 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13148 # C menu: 56 66 0 0 9600 0110 1100
13149 # D menu: 0110 1001 1 0
13151 # Briefly, the settings are for the following modes:
13152 # (values are for bit set/clear with * indicating our preference
13153 # and the value used to test these termcaps)
13154 # Note that many of these settings are irrelevant to the terminfo
13155 # and are just set to the default mode of the terminal as shipped
13158 # A menu: 0000 1010 0001 0000
13159 # Block/underline cursor*
13160 # blinking/nonblinking cursor*
13161 # key click/no key click*
13162 # bell/no bell at column 72*
13164 # key pad is cursor control*/key pad is numeric
13165 # return and line feed/return for <cr> key *
13166 # repeat after .5 sec*/no repeat
13167 # repeat at 25/15 chars per sec. *
13169 # hold data until pause pressed/process data unless pause pressed*
13170 # slow scroll/no slow scroll*
13171 # Hold in area/don't hold in area*
13172 # functions keys have default*/function keys disabled on powerup
13174 # show/don't show position of cursor during page transmit*
13179 # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
13180 # Baud rate (9600*)
13182 # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
13183 # 1 stop bit*/2 stop bits
13184 # parity error detection off*/on
13186 # keyboard local/on line*
13187 # half/full duplex*
13188 # disable/do not disable keyboard after data transmission*
13190 # transmit entire page/stop transmission at cursor*
13191 # transfer/do not transfer protected characters*
13192 # transmit all characters/transmit only selected characters*
13193 # transmit all selected areas/transmit only 1 selected area*
13195 # transmit/do not transmit line separators to host*
13196 # transmit/do not transmit page tab stops tabs to host*
13197 # transmit/do not transmit column tab stop tabs to host*
13198 # transmit/do not transmit graphics control (underline,inverse..)*
13200 # enable*/disable auto XON/XOFF control
13201 # require/do not require receipt of a DC1 from host after each LF*
13202 # pause key acts as a meta key/pause key is pause*
13210 # XON character (17*)
13211 # XOFF character (19*)
13213 # C menu: 56 66 0 0 9600 0110 1100
13214 # number of lines to print data on (printer) (56*)
13216 # number of lines on a sheet of paper (printer) (66*)
13218 # left margin (printer) (0*)
13220 # number of pad chars on new line to printer (0*)
13222 # printer baud rate (9600*)
13224 # printer parity: 00=odd,01=even*,10=space,11=mark
13225 # printer stop bits: 2*/1
13226 # print/do not print guarded areas*
13228 # new line is: 01=LF,10=CR,11=CRLF*
13232 # D menu: 0110 1001 1 0
13233 # LF is newline/LF is down one line, same column*
13234 # wrap to preceding line if move left from col 1*/don't wrap
13235 # wrap to next line if move right from col 80*/don't wrap
13236 # backspace is/is not destructive*
13238 # display*/ignore DEL character
13239 # display will not/will scroll*
13240 # page/column tab stops*
13241 # erase everything*/erase unprotected only
13243 # editing extent: 0=display,1=line*,2=field,3=area
13248 annarbor4080|aa4080|ann arbor 4080,
13251 bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
13252 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
13253 %{12}%+%;%{64}%+%c,
13254 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
13255 kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
13257 # Strange Ann Arbor terminal from BRL
13258 aas1901|Ann Arbor K4080 w/S1901 mod,
13261 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
13262 home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
13265 # If you're using the GNU termcap library, add
13266 # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
13267 # to these capabilities. This is the nonstandard GNU termcap scrolling
13268 # capability, arguments are:
13269 # 1. Total number of lines on the screen.
13270 # 2. Number of lines above desired scroll region.
13271 # 3. Number of lines below (outside of) desired scroll region.
13272 # 4. Total number of lines on the screen, the same as the first parameter.
13273 # The generic Ann Arbor entry is the only one that uses this.
13274 aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
13275 OTbs, am, km, mc5i, mir, xon,
13277 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13278 clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H,
13279 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
13280 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13281 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
13282 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
13283 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
13284 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
13285 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
13286 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13287 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
13288 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
13289 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
13290 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
13291 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
13292 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
13293 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
13294 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
13295 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
13297 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
13298 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
13301 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
13303 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13304 vpa=\E[%p1%{1}%+%dd,
13306 aaa+rv|ann arbor ambassador in reverse video,
13307 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
13308 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
13309 rs1=\E[H\E[7m\E[J$<156>,
13310 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;
13311 %;%?%p7%t8;%;m\016,
13312 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
13313 # Ambassador with the DEC option, for partial vt100 compatibility.
13314 aaa+dec|ann arbor ambassador in dec vt100 mode,
13315 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
13316 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
13317 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
13318 %p7%t8;%;m%?%p9%t\017%e\016%;,
13320 aaa-18|ann arbor ambassador/18 lines,
13322 is2=\E7\E[60;0;0;18p\E8,
13323 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
13325 aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
13326 use=aaa+rv, use=aaa-18,
13327 aaa-20|ann arbor ambassador/20 lines,
13329 is2=\E7\E[60;0;0;20p\E8,
13330 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
13332 aaa-22|ann arbor ambassador/22 lines,
13334 is2=\E7\E[60;0;0;22p\E8,
13335 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
13337 aaa-24|ann arbor ambassador/24 lines,
13339 is2=\E7\E[60;0;0;24p\E8,
13340 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
13342 aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
13343 use=aaa+rv, use=aaa-24,
13344 aaa-26|ann arbor ambassador/26 lines,
13346 is2=\E7\E[60;0;0;26p\E8,
13347 rmcup=\E[60;0;0;26p\E[26;1H\E[K,
13348 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
13349 aaa-28|ann arbor ambassador/28 lines,
13351 is2=\E7\E[60;0;0;28p\E8,
13352 rmcup=\E[60;0;0;28p\E[28;1H\E[K,
13353 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
13354 aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
13357 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
13358 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
13359 rmcup=\E[60;1;0;30p\E[29;1H\E[K,
13360 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
13361 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
13362 aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
13363 use=aaa+rv, use=aaa-30-s,
13364 aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
13365 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
13366 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
13367 aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
13368 rmcup=\E[60;1;0;30p\E[59;1H\E[K,
13369 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
13370 aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
13372 is2=\E7\E[60;0;0;30p\E8,
13373 rmcup=\E[60;0;0;30p\E[30;1H\E[K,
13374 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
13375 aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
13376 use=aaa+rv, use=aaa-30,
13377 aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
13378 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
13380 aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
13381 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
13382 use=aaa+rv, use=aaa-30,
13383 aaa-36|ann arbor ambassador/36 lines,
13385 is2=\E7\E[60;0;0;36p\E8,
13386 rmcup=\E[60;0;0;36p\E[36;1H\E[K,
13387 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
13388 aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
13389 use=aaa+rv, use=aaa-36,
13390 aaa-40|ann arbor ambassador/40 lines,
13392 is2=\E7\E[60;0;0;40p\E8,
13393 rmcup=\E[60;0;0;40p\E[40;1H\E[K,
13394 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
13395 aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
13396 use=aaa+rv, use=aaa-40,
13397 aaa-48|ann arbor ambassador/48 lines,
13399 is2=\E7\E[60;0;0;48p\E8,
13400 rmcup=\E[60;0;0;48p\E[48;1H\E[K,
13401 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
13402 aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
13403 use=aaa+rv, use=aaa-48,
13404 aaa-60-s|ann arbor ambassador/59 lines+status,
13407 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
13408 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
13409 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
13410 aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
13411 use=aaa+rv, use=aaa-60-s,
13412 aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
13413 use=aaa+dec, use=aaa+rv, use=aaa-60-s,
13414 aaa-60|ann arbor ambassador/60 lines,
13416 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
13418 aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
13419 use=aaa+rv, use=aaa-60,
13420 aaa-db|ann arbor ambassador 30/destructive backspace,
13422 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
13424 guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
13426 flash=\E[>59h$<100>\E[>59l,
13427 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
13428 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
13429 guru+rv|guru changes for reverse video,
13430 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
13431 guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
13432 use=guru+rv, use=guru-33,
13433 guru+s|guru status line,
13435 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
13436 rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
13437 tsl=\E[>51h\E[1;%p1%dH\E[2K,
13438 guru-nctxt|guru with no saved context,
13439 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
13440 guru-s|guru-33-s|ann arbor guru/33 lines+status,
13442 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
13443 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13444 guru-24|ann arbor guru 24 lines,
13446 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
13448 guru-44|ann arbor guru 44 lines,
13450 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
13452 guru-44-s|ann arbor guru/44 lines+status,
13454 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
13455 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13456 guru-76|guru with 76 lines by 89 cols,
13458 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
13460 guru-76-s|ann arbor guru/76 lines+status,
13462 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
13463 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13464 guru-76-lp|guru-lp|guru with page bigger than line printer,
13465 cols#134, lines#76,
13466 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
13468 guru-76-w|guru 76 lines by 178 cols,
13469 cols#178, lines#76,
13470 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
13472 guru-76-w-s|ann arbor guru/76 lines+status+wide,
13473 cols#178, lines#75,
13474 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
13475 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
13476 guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
13477 cols#178, lines#76,
13478 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
13480 aaa-rv-unk|ann arbor unknown type,
13481 lh#0, lw#0, nlab#0,
13482 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
13483 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
13485 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
13487 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
13489 #### Applied Digital Data Systems (adds)
13491 # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
13492 # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
13493 # terminals was merged again. Then AT&T sold the terminal business to
13494 # SunRiver, which later changed its name to Boundless Technologies. The
13495 # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
13496 # as of early 1995) are at:
13498 # Boundless Technologies
13499 # 100 Marcus Boulevard
13500 # Hauppauge, NY 11788-3762
13501 # Vox: (800)-231-5445
13502 # Fax: (516)-342-7378
13503 # Web: http://boundless.com
13505 # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
13506 # In 1995 Boundless acquired DEC's terminals business.
13509 # Regent: lowest common denominator, works on all regents.
13510 # (regent: renamed ":bc:" to ":le:" -- esr)
13511 regent|Adds Regent Series,
13514 bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z,
13515 home=\EY\s\s, ind=\n, ll=^A,
13516 # Regent 100 has a bug where if computer sends escape when user is holding
13517 # down shift key it gets confused, so we avoid escape.
13518 regent100|Adds Regent 100,
13521 cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
13522 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
13523 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
13524 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
13525 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
13526 regent20|Adds Regent 20,
13527 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
13529 regent25|Adds Regent 25,
13530 bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A,
13532 regent40|Adds Regent 40,
13534 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
13535 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
13536 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
13537 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
13538 smul=\E0`, use=regent25,
13539 regent40+|Adds Regent 40+,
13540 is2=\EB, use=regent40,
13541 regent60|regent200|Adds Regent 60,
13542 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
13543 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
13545 # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
13546 # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
13547 viewpoint|addsviewpoint|adds viewpoint,
13550 bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
13551 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
13552 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
13553 ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
13554 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
13555 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
13556 # Some viewpoints have bad ROMs that foo up on ^O
13557 screwpoint|adds viewpoint with ^O bug,
13558 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
13560 # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
13561 # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
13562 # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
13563 # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
13564 # invis=01000100 and %c is the logical or of desired attributes.
13565 # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
13567 # Update by TD - 2004:
13569 # https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
13571 # COMMANDS ASCII CODE
13573 # Address, Absolute ESC,=,row,column
13575 # Aux Port Enable ESC,@
13576 # Aux Port Disable ESC,A
13580 # Cursor forward FF
13583 # Cursor suppress ETB
13584 # Cursor enable CAN
13585 # Erase to end of line ESC,T
13586 # Erase to end of page ESC,Y
13589 # Keyboard unlock SO
13590 # Read current cursor position ESC,?
13591 # Set Attribute ESC,0,x (see below for values of x)
13592 # Tag bit reset ESC,(
13593 # Tag bit set ESC,)
13594 # Transparent Print on ESC,3
13595 # Transparent Print off ESC,4
13601 # Half Intensity A 0101
13603 # Half Intensity Blinking C 0103
13604 # Reverse Video P 0120
13605 # Reverse Video Half Intensity Q 0121
13606 # Reverse Video Blinking R 0122
13607 # Reverse Video Half Intensity
13609 # Underlined ` 0140
13610 # Underlined Half Intensity a 0141
13611 # Underlined Blinking b 0142
13612 # Underlined Half Intensity
13614 # Video suppress D 0104
13615 vp3a+|viewpoint3a+|adds viewpoint 3a+,
13617 cols#80, it#8, lines#24,
13618 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
13619 cub1=^H, cud1=\n, cuf1=^L,
13620 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
13621 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E),
13622 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
13623 nel=\r\n, rev=\E0P\E), rmso=\E(,
13624 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
13625 %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
13626 %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
13627 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
13628 vp60|viewpoint60|addsvp60|adds viewpoint60,
13631 # adds viewpoint 90 - from cornell
13632 # Note: emacs sends ei occasionally to insure the terminal is out of
13633 # insert mode. This unfortunately puts the viewpoint90 IN insert
13634 # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
13635 # - :ei=:im=: must be present in the termcap translation.)
13636 # - <xhp> indicates glitch that attributes stick to location
13637 # - <msgr> means it's safe to move in standout mode
13638 # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
13640 # Function key and label capabilities merged in from SCO.
13641 vp90|viewpoint90|adds viewpoint 90,
13642 OTbs, bw, msgr, xhp,
13644 clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
13645 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
13646 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
13647 ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n,
13648 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
13649 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
13650 kf7=^B8\r, kf8=^B9\r, kf9=\002\:\r, khome=^A, lf0=F1, lf1=F2,
13651 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
13652 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
13653 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
13654 # Note: if return acts weird on a980, check internal switch #2
13655 # on the top chip on the CONTROL pc board.
13656 adds980|a980|adds consul 980,
13659 bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
13660 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
13661 dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1,
13662 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
13663 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
13665 #### C. Itoh Electronics
13667 # As of 1995 these people no longer make terminals (they're still in the
13668 # printer business). Their terminals were all clones of the DEC VT series.
13669 # They're located in Orange County, CA.
13672 # CIT 80 - vt-52 emulator, the termcap has been modified to remove
13673 # the delay times and do an auto tab set rather than the indirect
13674 # file used in vt100.
13675 cit80|cit-80|citoh 80,
13678 clear=\E[H\EJ, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
13679 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
13680 ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
13681 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
13682 # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
13683 # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
13684 cit101|citc|C.itoh fast vt100,
13687 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
13688 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
13689 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
13690 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
13691 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
13692 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13693 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
13694 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
13696 # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
13697 # The following termcap entry was created from the Callan cd100 entry. The
13698 # last two lines (with the capabilities in caps) are used by RM-cobol to allow
13699 # full selection of combinations of reverse video, underline, and blink.
13700 # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
13701 # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
13702 # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
13703 cit101e|C. Itoh CIT-101e,
13704 OTbs, OTpt, am, mir, msgr,
13705 cols#80, it#8, lines#24,
13706 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
13707 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
13708 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
13709 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
13710 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
13711 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
13712 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
13713 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
13714 smkx=\E=, smso=\E[7m, smul=\E[4m,
13715 # From: David S. Lawyer, June 1997:
13716 # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
13717 # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
13718 # late 1980's CIT Terminals went out of business.
13719 # There is no need to use the initialization string is=... (by invoking
13720 # tset or setterm etc.) provided that the terminal has been manually set
13721 # up (and the setup saved with ^S) to be compatible with this termcap. To be
13722 # compatible it should be in ANSI mode (not VT52). A set-up that
13723 # works is to set all the manually settable stuff to factory defaults
13724 # by pressing ^D in set-up mode. Then increase the brightness with the
13725 # up-arrow key since the factory default will likely be dim on an old
13726 # terminal. Then change any options you want (provided that they are
13727 # compatible with the termcap). For my terminal I set: Screen
13728 # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
13729 # on. I also set up mine for parity (but you may not need it). Then
13730 # save the setup with ^S.
13731 # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
13732 cit101e-rv|Citoh CIT-101e (sets reverse video),
13733 am, eo, mir, msgr, xenl, xon,
13734 cols#80, it#8, lines#24,
13735 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13736 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=\r,
13737 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
13738 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13739 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13740 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
13741 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
13742 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
13743 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS,
13744 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
13745 B\E[m\E[20l\E[1;24r\E[24;1H,
13746 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13747 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
13748 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
13749 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
13750 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
13751 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
13752 u7=\E[6n, u8=\E[?6c, u9=\E[c,
13753 cit101e-n|CIT-101e w/o am,
13755 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
13757 cit101e-132|CIT-101e with 132 cols,
13759 kbs=^H, kcub1=^H, kcud1=\n, use=cit101e,
13760 cit101e-n132|CIT-101e with 132 cols w/o am,
13763 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
13765 # CIE Terminals CIT-500 from BRL
13766 # The following SET-UP modes are assumed for normal operation:
13767 # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
13768 # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
13769 # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
13770 # Other SET-UP modes may be set for operator convenience or communication
13772 # Hardware tabs are assumed to be set every 8 columns; they can be set up
13773 # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
13774 # "stty ixon -ixany" to enable DC3/DC1 flow control!
13775 # (cit500: I added <rmam>/<smam> based on the init string -- esr)
13776 cit500|CIE Terminals CIT-500,
13777 OTbs, OTpt, mir, msgr, xon,
13778 OTkn#10, cols#80, it#8, lines#64, vt#3,
13779 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13780 clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
13781 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
13782 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13783 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13784 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
13785 il1=\E[L, ind=\n, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
13786 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
13787 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
13788 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
13789 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
13790 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
13791 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
13792 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
13793 rmso=\E[m, rmul=\E[m,
13794 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
13795 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
13796 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13798 # C. Itoh printers begin here
13799 citoh|ci8510|8510|c.itoh 8510a,
13802 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
13803 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
13805 citoh-pica|citoh in pica,
13806 is1=\EN, use=citoh,
13807 citoh-elite|citoh in elite,
13810 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
13813 citoh-comp|citoh in compressed,
13816 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
13817 \,097\,105\,113\,121\,129.,
13819 # citoh has infinite cols because we don't want lp ever inserting \n\t**.
13820 citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
13822 is1=\EP, use=citoh,
13823 citoh-6lpi|citoh in 6 lines per inch mode,
13824 is3=\EA, use=citoh,
13825 citoh-8lpi|citoh in 8 lines per inch mode,
13827 is3=\EB, use=citoh,
13829 #### Control Data (cdc)
13832 cdc456|cdc 456 terminal,
13835 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
13836 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
13837 el=^V, home=^Y, il1=\EL, ind=\n,
13839 # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
13843 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13844 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
13845 kcuu1=^W, khome=^Y,
13846 cdc721ll|CDC Viking with long lines,
13848 cols#132, lines#24,
13849 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
13850 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
13851 kcuu1=^W, khome=^Y,
13852 # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
13856 bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
13857 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
13858 home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017,
13860 # The following switch/key settings are assumed for normal operation:
13861 # 96 chars SCROLL FULL duplex not BLOCK
13862 # Other switches may be set according to communication requirements.
13863 # Insert/delete-character cannot be used, as the whole display is affected.
13864 # "so" & "se" are commented out until jove handles "sg" correctly.
13867 OTkn#10, cols#80, lines#24,
13868 bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
13869 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
13870 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n,
13871 kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
13872 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
13873 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
13874 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
13875 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
13878 # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
13880 # Part of the long initialization string defines the "DOWN" key to the left
13881 # of the tab key to send an ESC. The real ESC key is positioned way out
13884 # The termcap won't work in 132 column mode due to the way it it moves the
13885 # cursor. Termcap doesn't have the capability (as far as I could tell) to
13886 # handle the 721 in 132 column mode.
13888 # (cdc721: changed :ri: to :sr: -- esr)
13889 cdc721-esc|Control Data 721,
13890 OTbs, OTpt, am, bw, msgr, xon,
13891 OTkn#10, cols#80, it#8, lines#30,
13892 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
13893 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
13894 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
13895 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
13896 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
13897 \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
13898 \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
13900 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
13901 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
13902 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
13903 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
13904 sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\,
13909 # Getronics is a Dutch electronics company that at one time was called
13910 # `Geveke' and made async terminals; but (according to the company itself!)
13911 # they've lost all their documentation on the command set. The hardware
13912 # documentation suggests the terminals were actually manufactured by a
13913 # Taiwanese electronics company named Cal-Comp. There are known
13914 # to have been at least two models, the 33 and the 50.
13917 # The 50 seems to be a top end vt220 clone, with the addition of a higher
13918 # screen resolution, a larger screen, at least 1 page of memory above and
13919 # below the screen, apparently pages of memory right and left of the screen
13920 # which can be panned, and about 75 function keys (15 function keys x normal,
13921 # shift, control, func A, func B). It also has more setup possibilities than
13922 # the vt220. The monitor case is dated November 1978 and the keyboard case is
13925 # The vt100 emulation works as is. The entry below describes the rather
13926 # non-conformant (but more featureful) ANSI mode.
13928 # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
13929 visa50|geveke visa 50 terminal in ansi 80 character mode,
13932 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
13933 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
13934 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
13935 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13936 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
13937 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
13938 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
13939 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
13940 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
13941 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
13942 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
13943 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
13944 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
13945 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
13946 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
13947 lf3=A insert line, lf4=A delete line, lf5=A clear,
13948 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
13949 lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l,
13950 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
13951 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
13952 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
13955 #### Human Designed Systems (Concept)
13957 # Human Designed Systems
13959 # King of Prussia, PA 19406
13960 # Vox: (610)-277-8300
13961 # Fax: (610)-275-5739
13962 # Net: support@hds.com
13964 # John Martin <john@hds.com> is their termcap expert. They're mostly out of
13965 # the character-terminal business now (1995) and making X terminals. In
13966 # particular, the whole `Concept' line described here was discontinued long
13970 # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
13971 # Extensive changes to c108 by arpavax:eric Feb 1982
13972 # Some unknown person at SCO then translated it to terminfo.
13974 # There seem to be a number of different versions of the C108 PROMS
13975 # (with bug fixes in its Z-80 program).
13977 # The first one that we had would lock out the keyboard of you
13978 # sent lots of short lines (like /usr/dict/words) at 9600 baud.
13979 # Try that on your C108 and see if it sends a ^S when you type it.
13980 # If so, you have an old version of the PROMs.
13982 # You should configure the C108 to send ^S/^Q before running this.
13983 # It is much faster (at 9600 baud) than the c100 because the delays
13985 # new status line display entries for c108-8p:
13986 # <is3> - init str #3 - setup term for status display -
13987 # set programmer mode, select window 2, define window at last
13988 # line of memory, set bkgnd stat mesg there, select window 0.
13990 # <tsl> - to status line - select window 2, home cursor, erase to
13991 # end-of-window, 1/2 bright on, goto(line#0, col#?)
13993 # <fsl> - from status line - 1/2 bright off, select window 0
13995 # <dsl> - disable status display - set bkgnd status mesg with
13998 # There are probably more function keys that should be added but
13999 # I don't know what they are.
14001 # No delays needed on c108 because of ^S/^Q handshaking
14003 c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
14004 is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
14006 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
14007 c108-4p|concept108-4p|concept 108 w/4 pages,
14008 OTbs, eslok, hs, xon,
14010 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
14011 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
14012 %>%t\001%{96}%-%;%{32}%+%c,
14013 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
14014 ind=\n, is1=\EK\E!\E F,
14015 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
14016 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
14017 smcup=\EU\Ev 8p\Ep\r\E\025,
14018 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
14019 c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
14020 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
14022 c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
14023 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
14025 c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
14027 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
14028 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
14031 # These have only window relative cursor addressing, not screen
14032 # relative. To get it to work right here, smcup/rmcup (which
14033 # were invented for the concept) lock you into a one page
14034 # window for screen style programs.
14036 # To get out of the one page window, we use a clever trick:
14037 # we set the window size to zero ("\Ev " in rmcup) which the
14038 # terminal recognizes as an error and resets the window to all
14041 # This trick works on c100 but does not on c108, sigh.
14043 # Some tty drivers use cr3 for concept, others use nl3, hence
14044 # the delays on cr and ind below. This padding is only needed at
14045 # 9600 baud and up. One or the other is commented out depending on
14046 # local conventions.
14048 # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
14049 # less than 6 but more than 2 will work.
14051 # Note: can't use function keys f7-f10 because they are
14052 # indistinguishable from arrow keys (!), also, del char and
14053 # clear eol use xon/xoff so they probably won't work very well.
14055 # Also note that we don't define insrt/del char/delline/eop/send
14056 # because they don't transmit unless we reset them - I figured
14057 # it was a bad idea to clobber their definitions.
14059 # The <mc5> sequence changes the escape character to ^^ so that
14060 # escapes will be passed through to the printer. Only trouble
14061 # is that ^^ won't be - ^^ was chosen to be unlikely.
14062 # Unfortunately, if you're sending raster bits through to be
14063 # plotted, any character you choose will be likely, so we lose.
14065 # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
14066 # cannot be # in is2 because it will hang a c100 with no printer
14068 c100|concept100|concept|c104|c100-4p|hds concept 100,
14069 OTbs, am, eo, mir, ul, xenl,
14070 cols#80, lines#24, pb#9600, vt#8,
14071 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
14072 cub1=^H, cud1=\n, cuf1=\E=,
14073 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
14074 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
14075 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
14076 ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>,
14078 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
14079 \010A@\s\E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
14080 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
14081 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
14082 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
14083 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
14084 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
14085 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
14086 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
14087 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
14088 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
14089 rmso=\Ed, rmul=\Eg, sgr0=\EN@,
14090 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
14091 smso=\ED, smul=\EG,
14092 c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
14093 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
14094 smso=\EE, use=c100,
14095 oc100|oconcept|c100-1p|old 1 page concept 100,
14099 # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
14100 # Lots of notes, originally inline, but ncurses doesn't grok that.
14102 # am: not available in power on mode, but turned on with \E[=107;207h in
14103 # is2=. Also, \E=124l in is2= could have been used to prevent needing
14104 # to specify xenl:, but that would have rendered the last space on the
14105 # last line useless.
14106 # bw: Not available in power on mode, but turned on with \E[=107;207h in
14108 # clear: Could be done with \E[2J alone, except that vi (and probably most
14109 # other programs) assume that this also homes the cursor.
14110 # dsl: Go to window 2, go to the beginning of the line, use a line feed to
14111 # scroll the window, and go back to window 1.
14112 # is2: the string may cause a warning to be issued by tic that it
14113 # found a very long line and that it suspects that a comma is missing
14114 # somewhere. This warning can be ignored (unless it comes up more than
14115 # once). The initialization string contains the following commands:
14117 # [Setup mode items changed from factory defaults:]
14118 # \E)0 set alternate character set to
14120 # ^O set character set to default
14121 # [In case it wasn't]
14122 # \E[m turn off all attributes
14123 # [In case they weren't off]
14124 # \E[=107; cursor wrap and
14125 # 207h character wrap on
14126 # \E[90;3u set Fkey definitions to "transmit"
14128 # \E[92;3u set cursor key definitions to
14129 # "transmit" defaults
14130 # \E[43;1u set shift F13 to transmit...
14132 # \E[44;1u set shift F14 to transmit...
14134 # \E[45;1u set shift F15 to transmit...
14136 # \E[46;1u set shift F16 to transmit...
14138 # \E[200;1u set shift up to transmit...
14140 # \E[201;1u set shift down to transmit...
14142 # \E[202;1u set shift right to transmit...
14144 # \E[203;1u set shift left to transmit...
14146 # \E[204;1u set shift home to transmit...
14148 # \E[212;1u set backtab to transmit...
14150 # \E[213;1u set shift backspace to transmit...
14152 # \E[214;1u set shift del to transmit...
14154 # [Necessary items not mentioned in setup mode:]
14155 # \E[2!w move to window 2
14156 # \E[25;25w define window as line 25 of memory
14157 # \E[!w move to window 1
14158 # \E[2*w show current line of window 2 as
14160 # \E[2+x set meta key to use high bit
14161 # \E[;3+} move underline to bottom of character
14163 # All Fkeys are set to their default transmit definitions with \E[90;3u
14164 # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
14165 # setting MUST be redefined or deactivated, because the default is
14166 # contained in almost all of this terminal's Fkey strings! If for some
14167 # reason "quit" cannot be altered, the Fkeys can, but it would be
14168 # necessary to change ^| to ^] in all of these definitions, and add
14169 # \E[2;029!t to is2.
14170 # lines: is set to 24 because this terminal refuses to treat the 25th
14172 # ll: Not available in power on mode, but turned on with \E[=107;207h in
14174 # lm: Pointless, given that this definition locks a single screen of
14175 # memory into view, but what the hey...
14176 # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
14177 # other attributes alone), but some programs expect this to turn off
14179 # rmul: Could use \E[4!{ to turn off only underline (leaving any other
14180 # attributes alone), but some programs expect this to turn off
14182 # sgr: Attributes are set on this terminal with the string \E[ followed by
14183 # a list of attribute code numbers (in decimal, separated by
14184 # semicolons), followed by the character m. The attribute code
14187 # 2 for dim (which is ignored in power on mode);
14191 # 8 for not displayable; and
14192 # =99 for protected (except that there are strange side
14193 # effects to protected characters which make them inadvisable).
14194 # The mapping of terminfo parameters to attributes is as follows:
14195 # %p1 (standout) = bold and inverse together;
14196 # %p2 (underline) = underline;
14197 # %p3 (reverse) = inverse;
14198 # %p4 (blink) = blinking;
14199 # %p5 (dim) is ignored;
14200 # %p6 (bold) = bold;
14201 # %p7 (invisible) = not displayable;
14202 # %p8 (protected) is ignored; and
14203 # %p9 (alt char set) = alt char set.
14204 # The code to do this is:
14206 # %?%p1%p6%O IF (standout; bold) OR
14207 # %t;1 THEN OUTPUT ;1
14209 # %?%p2 IF underline
14210 # %t;4 THEN OUTPUT ;4
14213 # %t;5 THEN OUTPUT ;5
14215 # %?%p1%p3%O IF (standout; reverse) OR
14216 # %t;7 THEN OUTPUT ;7
14218 # %?%p7 IF invisible
14219 # %t;8 THEN OUTPUT ;8
14222 # %?%p9 IF altcharset
14223 # %t^N THEN OUTPUT ^N
14224 # %e^O ELSE OUTPUT ^O
14226 # sgr0: Everything is turned off (including alternate character set), since
14227 # there is no way of knowing what it is that the program wants turned
14229 # smul: The "underline" attribute is reconfigurable to an overline or
14230 # strike-through, or (as done with \E[;3+} in is2=), to a line at the true
14231 # bottom of the character cell. This was done to allow for more readable
14232 # underlined characters, and to be able to distinguish between an
14233 # underlined space, an underscore, and an underlined underscore.
14234 # xenl: Terminal can be configured to not need this, but this "glitch"
14235 # behavior is actually preferable with autowrap terminals.
14237 # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
14238 # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
14239 # string modifies the 'O' in kf43 to kf46 to a '$'.
14241 # kcbt was originally ^I but redefined in is2=.
14242 # kHOM was \E[H originally but redefined in is2=, as were a number of
14244 # kDC was originally \177 but redefined in is2=.
14246 # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
14247 # tsl: Go to window 2, then do an hpa=.
14249 #------- flash=\E[8;3!}^G\E[3;3!}
14250 #------- flash=\E[?5h$<100>\E[?5l
14251 # There are two ways to flash the screen, both of which have their drawbacks.
14252 # The first is to set the bell mode to video, transmit a bell character, and
14253 # set the bell mode back - but to what? There is no way of knowing what the
14254 # user's old bell setting was before we messed with it. Worse, the command to
14255 # set the bell mode also sets the key click volume, and there is no way to say
14256 # "leave that alone", or to know what it's set to, either.
14257 # The second way to do a flash is to set the screen to inverse video, pad for a
14258 # tenth of a second, and set it back - but like before, there's no way to know
14259 # that the screen wasn't ALREADY in inverse video, or that the user may prefer
14260 # it that way. The point is moot anyway, since vi (and probably other
14261 # programs) assume that by defining flash=, you want the computer to use it
14262 # INSTEAD of bel=, rather than as a secondary type of signal.
14264 #------- cvvis=\E[+{
14265 # The is the power on setting, which is also as visible as the cursor
14267 #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
14268 # Windowing is possible, but not defined here because it is also used to
14269 # emulate status line functions. Allowing a program to set a window could
14270 # clobber the status line or render it unusable. There is additional memory,
14271 # but screen scroll functions are destructive and do not make use of it.
14273 #------- dim= Not available in power on mode.
14274 # You have a choice of defining low intensity characters as "half bright" and
14275 # high intensity as "normal", or defining low as "normal" and high as "bold".
14276 # No matter which you choose, only one of either "half bright" or "bold" is
14277 # available at any time, so taking the time to override the default is
14280 #------- prot=\E[=0;99m
14281 # Not defined, because it appears to have some strange side effects.
14282 #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14283 #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
14284 #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
14285 # Available, but making them available to programs is inadvisable.
14286 # The code to do this is:
14287 # %?%p1%{24}%< IF ((key; 24) <;
14288 # %p1%{30}%> ((key; 30) >;
14289 # %p1%{54}%< (key; 54) <
14292 # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
14293 # %t\E[ THEN OUTPUT \E[
14294 # %p1%d OUTPUT (key) as decimal
14295 # [next line applies to pfx only]
14299 # %p2%s OUTPUT (string) as string
14301 # [DEL chosen as delimiter, but could be any character]
14302 # [implied: ELSE do nothing]
14306 # Not defined since anything it might do could be done faster and easier with
14307 # either Meta-Shift-Reset or the main power switch.
14309 #------- smkx=\E[1!z
14310 #------- rmkx=\E[!z
14311 # These sequences apply to the cursor and setup keys only, not to the
14312 # numeric keypad. But it doesn't matter anyway, since making these
14313 # available to programs is inadvisable.
14314 # For the key definitions below, all sequences beginning with \E$ are
14315 # custom and programmed into the terminal via is2. \E$ also has no
14316 # meaning to any other terminal.
14318 #------- cmdch=\E[;%p1%d!t
14319 # Available, but making it available to programs is inadvisable.
14320 #------- smxon=\E[1*q
14321 # Available, but making it available to programs is inadvisable.
14322 # Terminal will send XON/XOFF on buffer overflow.
14323 #------- rmxon=\E[*q
14324 # Available, but making it available to programs is inadvisable.
14325 # Terminal will not notify on buffer overflow.
14326 #------- smm=\E[2+x
14328 # Available, but making them available to programs is inadvisable.
14331 # It's not made clear in the manuals, but based on other ansi/vt type
14332 # terminals, it's a good guess that this terminal is capable of both
14333 # "transparent print" (which doesn't copy data to the screen, and
14334 # therefore needs mc5i: specified to say so) and "auxiliary print"
14335 # (which does duplicate printed data on the screen, in which case mc4=
14336 # and mc5= should use the \E[?4i and \E[?5i strings instead).
14338 hds200|Human Designed Systems HDS200,
14339 am, bw, eslok, hs, km, mir, msgr, xenl, xon,
14340 cols#80, it#8, lines#24, lm#0,
14341 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
14342 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
14343 clear=\E[H\E[J, cnorm=\E[+{, cr=\r,
14344 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14345 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14346 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14347 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
14348 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
14349 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
14350 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14352 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
14353 \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
14354 \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
14355 \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
14356 \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
14357 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
14358 kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
14359 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14360 kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r,
14361 kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS,
14362 kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r,
14363 kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r,
14364 kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r,
14365 kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r,
14366 kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r,
14367 kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q,
14368 kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r,
14369 kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r,
14370 kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r,
14371 kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U,
14372 kpp=\E[V, kri=\E[S, ll=\E[H\E[A, nel=\E[E, rc=\E8,
14373 rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
14374 rmul=\E[m\017, sc=\E7,
14375 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
14376 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14377 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
14378 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
14379 vpa=\E[%i%p1%dd, use=ansi+pp,
14381 # <ht> through <el> included to specify padding needed in raw mode.
14382 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
14383 avt-ns|concept avt no status line,
14384 OTbs, am, eo, mir, ul, xenl, xon,
14385 cols#80, it#8, lines#24, lm#192,
14386 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
14387 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
14388 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14389 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
14390 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14391 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
14392 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
14393 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
14394 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
14395 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
14396 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
14397 \E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;
14399 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14400 kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
14401 kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r,
14402 ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
14403 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
14404 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
14405 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
14406 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
14408 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
14409 %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
14411 sgr0=\E[m\016$<1>, smacs=\017$<1>,
14412 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
14413 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
14414 vpa=\E[%p1%{1}%+%dd,
14415 avt-rv-ns|concept avt in reverse video mode/no status line,
14416 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
14418 avt-w-ns|concept avt in 132 column mode/no status line,
14419 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
14421 avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
14422 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
14423 smcup=\E[H\E[1;24;1;132w, use=avt-ns,
14425 # Concept AVT with status line. We get the status line using the
14426 # "Background status line" feature of the terminal. We swipe the
14427 # first line of memory in window 2 for the status line, keeping
14428 # 191 lines of memory and 24 screen lines for regular use.
14429 # The first line is used instead of the last so that this works
14430 # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
14431 # assumes an 8 page AVT but lm isn't currently used anywhere.)
14433 avt+s|concept avt status line changes,
14436 dsl=\E[0*w, fsl=\E[1;1!w,
14437 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
14438 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
14439 tsl=\E[2;1!w\E[;%p1%dH\E[2K,
14440 avt|avt-s|concept-avt|avt w/80 columns,
14441 use=avt+s, use=avt-ns,
14442 avt-rv|avt-rv-s|avt reverse video w/sl,
14443 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
14444 use=avt+s, use=avt-ns,
14445 avt-w|avt-w-s|concept avt 132 cols+status,
14446 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
14447 use=avt+s, use=avt-ns,
14448 avt-w-rv|avt-w-rv-s|avt wide+status+rv,
14449 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
14450 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
14452 #### Contel Business Systems.
14455 # Contel c300 and c320 terminals.
14456 contel300|contel320|c300|Contel Business Systems C-300 or C-320,
14458 cols#80, lines#24, xmc#1,
14459 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
14460 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
14461 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
14462 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
14463 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
14464 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
14465 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
14466 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
14467 # Contel c301 and c321 terminals.
14468 contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
14469 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
14472 #### Data General (dg)
14474 # According to James Carlson <carlson@xylogics.com> writing in January 1995,
14475 # the terminals group at Data General was shut down in 1991; all these
14476 # terminals have thus been discontinued.
14478 # DG terminals have function keys that respond to the SHIFT and CTRL keys,
14479 # e.g., SHIFT-F1 generates a different code from F1. To number the keys
14480 # sequentially, first the unmodified key codes are listed as F1 through F15.
14481 # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
14482 # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
14483 # F46 through F60. This is done in the private "includes" below whose names
14484 # start with "dgkeys+".
14486 # DG terminals generally support 8 bit characters. For each of these terminals
14487 # two descriptions are supplied:
14488 # 1) A default description for 8 bits/character communications, which
14489 # uses the default DG international character set and keyboard codes.
14490 # 2) A description with suffix "-7b" for 7 bits/character communications.
14491 # This description must use the NON-DEFAULT native keyboard language.
14493 # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
14494 # Ctrl/Shift fdkeys (kf34-kf44).
14496 dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
14497 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
14498 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
14499 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
14500 kf11=\233011z, kf12=\233012z, kf13=\233013z,
14501 kf14=\233014z, kf15=\233000z, kf16=\233101z,
14502 kf17=\233102z, kf18=\233103z, kf19=\233104z,
14503 kf2=\233002z, kf20=\233105z, kf21=\233106z,
14504 kf22=\233107z, kf23=\233108z, kf24=\233109z,
14505 kf25=\233110z, kf26=\233111z, kf27=\233112z,
14506 kf28=\233113z, kf29=\233114z, kf3=\233003z,
14507 kf30=\233100z, kf31=\233201z, kf32=\233202z,
14508 kf33=\233203z, kf34=\233204z, kf35=\233205z,
14509 kf36=\233206z, kf37=\233207z, kf38=\233208z,
14510 kf39=\233209z, kf4=\233004z, kf40=\233210z,
14511 kf41=\233211z, kf42=\233212z, kf43=\233213z,
14512 kf44=\233214z, kf45=\233200z, kf46=\233301z,
14513 kf47=\233302z, kf48=\233303z, kf49=\233304z,
14514 kf5=\233005z, kf50=\233305z, kf51=\233306z,
14515 kf52=\233307z, kf53=\233308z, kf54=\233309z,
14516 kf55=\233310z, kf56=\233311z, kf57=\233312z,
14517 kf58=\233313z, kf59=\233314z, kf6=\233006z,
14518 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
14519 khome=\233H, kprt=\233i,
14521 dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
14522 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
14523 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14524 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
14525 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
14526 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
14527 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
14528 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
14529 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
14530 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
14531 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
14532 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
14533 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
14534 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
14535 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
14536 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
14537 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
14538 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
14539 kf9=\E[009z, khome=\E[H, kprt=\E[i,
14541 dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
14542 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
14543 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
14544 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
14545 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
14546 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
14547 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
14548 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
14549 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
14550 kf8=^^x, kf9=^^y, khome=^H,
14552 dgkeys+15|Private entry describing 15 DG mode special keys,
14553 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
14554 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
14555 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
14556 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
14557 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
14558 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
14559 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
14560 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
14561 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
14562 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
14563 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
14566 # Data General color terminals use the "Tektronix" color model. The total
14567 # number of colors varies with the terminal model, as does support for
14568 # attributes used in conjunction with color.
14570 # Removed u7, u8 definitions since they conflict with tack:
14571 # Preserve user-defined colors in at least some cases.
14573 # Default is ACM mode.
14574 # u8=^^F}20^^Fi^^F}21,
14576 dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
14578 colors#16, ncv#53, pairs#0x100,
14580 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14581 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14582 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14583 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14584 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
14586 dg+fixed|Fixed color info for DG D430C terminals in DG mode,
14589 # Video attributes are coordinated using static variables set by "sgr", then
14590 # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
14591 # (D=dim, U=underline, B=blink, R=reverse.)
14592 dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
14594 colors#8, ncv#16, pairs#64,
14595 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
14596 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14597 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14598 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
14599 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14600 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
14601 %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
14603 dg+color|Color info for Data General D470C terminals in ANSI mode,
14604 colors#16, ncv#53, pairs#0x100,
14605 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
14606 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
14608 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
14609 %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
14611 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
14612 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
14614 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
14615 %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
14619 dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
14621 colors#8, ncv#16, pairs#64,
14623 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
14625 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
14627 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
14629 dgmode+color|Color info for Data General D470C terminals in DG mode,
14630 colors#16, pairs#0x100,
14631 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14632 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14633 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
14634 %{4}%&%t%{1}%|%;%;%{48}%+%c,
14637 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
14639 colors#52, ncv#53, pairs#26,
14640 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
14641 %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
14642 %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
14644 oc=\036RG01A00FF00000000\036RG01B00000000FF00
14645 \036RG01C007F00000000\036RG01D000000007F00,
14646 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
14647 scp=\036RG2%p1%02X,
14649 # Colors are in the order: normal, reverse, dim, dim + reverse.
14650 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
14652 colors#52, ncv#53, pairs#26,
14653 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
14654 %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
14655 %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
14656 %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
14657 %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
14658 %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
14659 %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
14660 %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
14661 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?0
14662 0000000\036RG01=000000007?00,
14663 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
14664 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
14666 # The generic DG terminal type (an 8-bit-clean subset of the 6053)
14667 # Initialization string 1 sets:
14668 # ^R - vertical scrolling enabled
14669 # ^C - blinking enabled
14670 dg-generic|Generic Data General terminal in DG mode,
14673 bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
14674 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C,
14675 mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
14676 smul=^T, use=dgkeys+11,
14678 # According to the 4.4BSD termcap file, the dg200 <cup> should be the
14679 # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
14680 # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
14681 # maybe they were originally nuls (which would fit).
14683 dg200|data general dasher 200,
14686 bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
14687 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n,
14688 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
14689 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
14690 kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U,
14693 # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
14694 dg210|dg-ansi|Data General 210/211,
14697 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
14698 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
14699 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14700 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
14701 smso=\E[7;m, smul=\E[4;m,
14702 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
14703 # courtesy of Carlos Rucalde of Vantage Software, Inc.
14704 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
14705 # I suspect the d200 function keys actually work on the dg211, check it out.)
14706 dg211|Data General d211,
14707 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
14708 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L,
14709 rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
14711 # dg450 from Cornell (not official)
14712 dg450|dg6134|data general 6134,
14713 cub1@, cuf1=^X, use=dg200,
14716 # Note: lesser Dasher terminals will not work with vi because vi insists upon
14717 # having a command to move straight down from any position on the bottom line
14718 # and scroll the screen up, or a direct vertical scroll command. The 460 and
14719 # above have both, the D210/211, for instance, has neither. We must use ANSI
14720 # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
14721 # backspace on all terminals. This is not so in DG mode.
14722 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
14723 # grounds that there is no matching ":ml:"
14724 dg460-ansi|Data General Dasher 460 in ANSI-mode,
14725 OTbs, am, msgr, ul,
14726 cols#80, it#8, lines#24,
14727 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
14728 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
14729 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
14730 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
14731 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14732 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
14733 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
14734 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
14735 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
14736 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
14737 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
14739 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
14740 u7=\E[6n, u8=\E[5n, u9=\E[0n,
14741 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
14742 # Data General 605x
14743 # Ought to work for a Model 6242, Type D210 as well as a 605x.
14744 # Note that the cursor-down key transmits ^Z. Job control users, beware!
14745 # This also matches a posted description of something called a `Dasher 100'
14746 # so there's a dg100 alias here.
14747 # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
14748 dg6053-old|dg100|data general 6053,
14751 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
14752 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
14753 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
14754 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
14755 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
14756 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
14759 # (Some performance can be gained over the generic DG terminal type)
14760 dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
14762 home=\020\0\0, ll=^P\0^W, use=dg-generic,
14764 # Like 6053, but adds reverse video and more keypad and function keys.
14765 d200|d200-dg|Data General DASHER D200,
14766 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
14767 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
14768 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
14769 sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053,
14771 # DASHER D210 series terminals in ANSI mode.
14772 # Reverse video, no insert/delete character/line, 7 bits/character only.
14774 # Initialization string 1 sets:
14775 # <0 - scrolling enabled
14776 # <1 - blink enabled
14777 # <4 - print characters regardless of attributes
14778 d210|d214|Data General DASHER D210 series,
14781 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r,
14782 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14783 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14784 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
14785 el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l,
14786 ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
14787 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
14789 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
14791 # DASHER D210 series terminals in DG mode.
14792 # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
14793 d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
14795 ed=^^FF, use=d200-dg,
14797 # DASHER D211 series terminals in ANSI mode.
14798 # Like the D210, but with 8-bit characters and local printer support.
14800 # Initialization string 2 sets:
14802 # 2;1 - 8 bit operations
14803 # 1;1 - 8 bit (international) keyboard language
14804 # \E(B - default primary character set (U.S. ASCII)
14805 # \E)4 - default secondary character set (international)
14806 # ^O - primary character set
14808 d211|d215|Data General DASHER D211 series,
14810 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
14813 # Initialization string 2 sets:
14815 # 2;0 - 7 bit operations
14816 # 1;0 - 7 bit (native) keyboard language
14817 # \E(0 - default character set (the keyboard native language)
14818 # ^O - primary character set
14819 d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
14821 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
14823 # Like the D210 series, but adds support for 8-bit characters.
14825 # Reset string 2 sets:
14826 # ^^N - secondary character set
14827 # ^^FS0> - 8 bit international character set
14828 # ^^O - primary character set
14829 # ^^FS00 - default character set (matching the native keyboard language)
14831 d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
14833 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
14835 d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
14838 # Enhanced DG mode with changes to be more UNIX compatible.
14839 d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
14842 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
14843 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
14844 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n,
14845 is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1,
14846 kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC,
14847 kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9,
14848 mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
14849 rs2=\036N\036FS0E\036O\036FS00,
14850 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
14851 \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
14853 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
14854 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
14855 d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
14857 is3=^^Fz2, use=d216+,
14859 d217-unix|Data General DASHER D217 in DG-UNIX mode,
14861 d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
14864 # DASHER D220 color terminal in ANSI mode.
14865 # Like the D470C but with fewer colors and screen editing features.
14867 # Initialization string 1 sets:
14869 # <0 - scrolling enabled
14870 # <1 - blink enabled
14871 # <4 - print characters regardless of attributes
14872 # \E[m - all attributes off
14873 # Reset string 1 sets:
14874 # \Ec - initial mode defaults (RIS)
14876 d220|Data General DASHER D220,
14878 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
14879 use=dg+color8, use=d470c,
14881 d220-7b|Data General DASHER D220 in 7 bit mode,
14883 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
14884 use=dg+color8, use=d470c-7b,
14886 # Initialization string 3 sets:
14887 # - default cursor (solid rectangle)
14888 # Reset string 2 sets:
14889 # ^^N - secondary character set
14890 # ^^FS0> - 8 bit international character set
14891 # ^^O - primary character set
14892 # ^^FS00 - default character set (matching the native keyboard language)
14894 d220-dg|Data General DASHER D220 color terminal in DG mode,
14896 dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@,
14897 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
14900 # DASHER D230C color terminal in ANSI mode.
14901 # Like the D220 but with minor ANSI compatibility improvements.
14903 d230c|d230|Data General DASHER D230C,
14904 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n,
14905 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
14906 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e
14907 %{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}
14908 %e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
14909 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
14910 smul=\E[4;50m, use=dgkeys+7b, use=d220,
14912 d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
14915 # DASHER D400/D450 series terminals.
14916 # These add intelligent features like insert/delete to the D200 series.
14918 # Initialization string 2 sets:
14919 # ^^FQ2 - default cursor (solid rectangle)
14920 # ^^FW - character protection disabled
14921 # ^^FJ - normal (80 column) mode
14922 # ^^F\^ - horizontal scrolling enabled (for alignment)
14923 # ^^FX004? - margins at columns 0 and 79
14924 # ^^F] - horizontal scrolling disabled
14925 # ^^O - primary character set
14926 # ^^FS00 - default character set (the keyboard native language)
14927 # - (should reset scrolling regions, but that glitches the screen)
14928 # Reset string 1 sets:
14929 # ^^FA - all terminal defaults except scroll rate
14930 # Reset string 2 sets:
14931 # ^^F] - horizontal scrolling disabled
14932 # ^^FT0 - jump scrolling
14934 d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
14936 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2,
14937 dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG,
14938 hpa=\020%p1%c\177, ich1=^^J, il1=^^FH,
14939 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
14941 ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA,
14943 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
14944 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
14945 sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c,
14948 # DASHER D410/D460 series terminals in ANSI mode.
14949 # These add a large number of intelligent terminal features.
14951 # Initialization string 1 sets:
14953 # <0 - scrolling enabled
14954 # <1 - blink enabled
14955 # <2 - horizontal scrolling enabled (for alignment)
14956 # <4 - print characters regardless of attributes
14957 # \E[5;0v - normal (80 column) mode
14958 # \E[1;1;80w - margins at columns 1 and 80
14960 # 1 - print all characters even if protected
14961 # 6 - character protection disabled
14962 # <2 - horizontal scrolling disabled
14963 # - (should reset scrolling regions, but that glitches the screen)
14965 # Initialization string 2 sets:
14967 # 3;2 - default cursor (solid rectangle)
14968 # 2;1 - 8 bit operations
14969 # 1;1 - international keyboard language
14970 # \E(B - default primary character set (U.S. ASCII)
14971 # \E)4 - default secondary character set (international)
14972 # ^O - primary character set
14974 # Reset string 1 sets:
14975 # \Ec - initial mode defaults (RIS)
14976 # \E[<2h - horizontal scrolling disabled
14978 # Reset string 2 sets:
14980 # 4;0 - jump scrolling
14981 # 2;1 - 8 bit operations
14982 # 1;1 - 8 bit (international) keyboard language
14983 # \E(B - default primary character set (U.S. ASCII)
14984 # \E)4 - default secondary character set (international)
14986 d410|d411|d460|d461|Data General DASHER D410/D460 series,
14988 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
14989 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14990 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
14991 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
14992 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
14993 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
14994 rs2=\E[4;0;2;1;1;1v\E(B\E)4,
14995 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
14996 %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
14997 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
14999 # Initialization string 2 sets:
15001 # 3;2 - default cursor (solid rectangle)
15002 # 2;0 - 7 bit operations
15003 # 1;0 - 7 bit (native) keyboard language
15004 # \E(0 - default character set (the keyboard native language)
15005 # ^O - primary character set
15007 # Reset string 2 sets:
15009 # 4;0 - jump scrolling
15010 # 2;0 - 7 bit operations
15011 # 1;0 - 7 bit (native) keyboard language
15012 # \E(0 - default character set (the keyboard native language)
15014 d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
15016 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
15017 rs2=\E[4;0;2;0;1;0v\E(0,
15018 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1
15019 %p5%|%t2;%;m%?%p9%t\016%e\017%;,
15020 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
15022 d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
15024 enacs@, rmacs=\036FS00,
15025 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
15026 %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
15028 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
15031 # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
15033 # Initialization string 1 sets:
15035 # <0 - scrolling enabled
15036 # <1 - blink enabled
15037 # <2 - horizontal scrolling enabled (for alignment)
15038 # <4 - print characters regardless of attributes
15039 # \E[5;1v - compressed (135 column) mode
15040 # \E[1;1;126 - margins at columns 1 and 126
15042 # 1 - print all characters even if protected
15043 # 6 - character protection disabled
15044 # <2 - horizontal scrolling disabled
15045 # - (should reset scrolling regions, but that glitches the screen)
15047 # Reset string 1 sets:
15048 # \Ec - initial mode defaults (RIS)
15049 # \E[5;1v - compressed (135 column) mode
15050 # \E[1;1;126w - margins at columns 1 and 126
15051 # \E[<2h - horizontal scrolling disabled
15053 d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
15055 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15056 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
15058 d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
15060 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
15061 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
15063 d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
15066 # These add intelligent features like scrolling regions.
15067 d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
15068 civis=^^FQ0, clear=^^FE, cnorm=^^FQ5,
15069 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
15070 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
15071 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
15073 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
15074 rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10,
15075 vpa=\036FPFF%p1%2.2X,
15076 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15077 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15079 d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
15081 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
15083 rs2=\036P@1\036FK\036FX0083,
15084 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
15085 %>%t001%;\036FX%p3%2.2X%p4%2.2X,
15087 d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
15090 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
15091 %>%t000%;\036FX%p3%2.2X%p4%2.2X,
15093 d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
15095 clear=\036FG\036PH, fsl=\036F}01\022,
15096 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
15097 tsl=\036F}00\036FP%p1%2.2X18\036PG,
15098 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
15099 %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
15102 # Relative cursor motions are confined to the current window,
15103 # which is not what the scrolling region specification expects.
15104 # Thus, relative vertical cursor positioning must be deleted.
15105 d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
15106 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
15108 cud1@, cuu1@, ll@, use=d462+,
15110 d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
15112 d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
15114 d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
15116 d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
15118 d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
15121 d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
15123 d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
15125 d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
15127 d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
15129 d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
15132 d430c-dg|d430-dg|Data General D430C in DG mode,
15133 use=d413-dg, use=dg+fixed,
15134 d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
15135 use=d413-dg, use=dg+ccc,
15137 d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
15138 use=d413-unix, use=dgunix+fixed,
15139 d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
15140 use=d413-unix-w, use=dgunix+fixed,
15141 d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
15142 use=d413-unix-25, use=dgunix+fixed,
15143 d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
15144 use=d413-unix-s, use=dgunix+fixed,
15145 d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
15146 use=d413-unix-sr, use=dgunix+fixed,
15147 d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
15148 use=d413-unix, use=dgunix+ccc,
15149 d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
15150 use=d413-unix-w, use=dgunix+ccc,
15151 d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
15152 use=d413-unix-25, use=dgunix+ccc,
15153 d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
15154 use=d413-unix-s, use=dgunix+ccc,
15155 d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
15156 use=d413-unix-sr, use=dgunix+ccc,
15158 # DASHER D470C color terminal in ANSI mode.
15159 # Like the D460 but with 16 colors and without a compressed mode.
15161 # Initialization string 1 sets:
15163 # <0 - scrolling enabled
15164 # <1 - blink enabled
15165 # <2 - horizontal scrolling enabled (for alignment)
15166 # <4 - print characters regardless of attributes
15167 # \E[1;1;80w - margins at columns 1 and 80
15169 # 1 - print all characters even if protected
15170 # 6 - character protection disabled
15171 # <2 - horizontal scrolling disabled
15172 # - (should reset scrolling regions, but that glitches the screen)
15174 d470c|d470|Data General DASHER D470C,
15175 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15176 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15177 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
15178 use=dg+color, use=d460,
15180 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
15181 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
15182 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
15183 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
15184 use=dg+color, use=d460-7b,
15186 # Initialization string 2 sets:
15187 # ^^FQ2 - default cursor (solid rectangle)
15188 # ^^FW - character protection disabled
15189 # ^^F\^ - horizontal scrolling enabled (for alignment)
15190 # ^^FX004? - margins at columns 0 and 79
15191 # ^^F] - horizontal scrolling disabled
15192 # ^^O - primary character set
15193 # ^^FS00 - default character set (the keyboard native language)
15194 # - (should reset scrolling regions, but that glitches the screen)
15196 d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
15197 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
15199 use=dgmode+color, use=d460-dg,
15201 # DASHER D555 terminal in ANSI mode.
15202 # Like a D411, but has an integrated phone.
15203 d555|Data General DASHER D555,
15205 d555-7b|Data General DASHER D555 in 7-bit mode,
15207 d555-w|Data General DASHER D555 in wide mode,
15209 d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
15211 d555-dg|Data General DASHER D555 series in DG mode,
15214 # DASHER D577 terminal in ANSI mode.
15215 # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
15216 d577|Data General DASHER D577,
15218 d577-7b|Data General DASHER D577 in 7-bit mode,
15220 d577-w|Data General DASHER D577 in wide mode,
15222 d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
15225 d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
15228 # DASHER D578 terminal.
15229 # Like a D577, but without compressed mode; like a D470C in this respect.
15231 # Initialization string 1 sets:
15233 # <0 - scrolling enabled
15234 # <1 - blink enabled
15235 # <2 - horizontal scrolling enabled (for alignment)
15236 # <4 - print characters regardless of attributes
15237 # \E[1;1;80w - margins at columns 1 and 80
15239 # 1 - print all characters even if protected
15240 # 6 - character protection disabled
15241 # <2 - horizontal scrolling disabled
15242 # - (should reset scrolling regions, but that glitches the screen)
15244 d578|Data General DASHER D578,
15245 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
15246 d578-7b|Data General DASHER D578 in 7-bit mode,
15247 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
15249 #### Datamedia (dm)
15251 # Datamedia was headquartered in Nashua, New Hampshire until it went
15252 # out of business in 1993, but the ID plates on the terminals referred
15253 # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
15254 # manufacturer which threw out all information about the terminals.
15257 cs10|colorscan|Datamedia Color Scan 10,
15260 bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
15261 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15262 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
15263 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
15264 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15265 cs10-w|Datamedia Color Scan 10 with 132 columns,
15267 cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
15269 # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
15270 dm1520|dm1521|datamedia 1520,
15272 cols#80, it#8, lines#24,
15273 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
15274 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
15275 home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
15277 # dm2500: this terminal has both <ich> and <smir>. Applications using
15278 # termcap/terminfo directly (rather than through ncurses) might be confused.
15279 dm2500|datamedia2500|datamedia 2500,
15282 bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
15283 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
15284 dch1=\020\010\030\035$<10*>,
15285 dl1=\020\032\030\035$<10*>, el=^W, home=^B,
15286 ich1=\020\034\030\035$<10*>,
15287 il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377,
15288 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
15289 smdc=^P, smir=^P, smso=^N,
15290 # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
15291 # also, has a meta-key.
15292 # From: <goldberger@su-csli.arpa>
15293 # (dmchat: ":MT:" changed to ":km:" -- esr)
15294 dmchat|dmchat version of datamedia 2500,
15296 dl1=\020\032\030\035$<2/>,
15297 il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
15298 # (dm3025: ":MT:" changed to ":km:" -- esr)
15299 dm3025|datamedia 3025a,
15301 cols#80, it#8, lines#24,
15302 bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
15303 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
15304 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
15305 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
15306 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
15307 smir=\EP, smso=\EO1,
15308 dm3045|datamedia 3045a,
15309 OTbs, am, eo, km@, ul, xenl,
15310 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
15311 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
15312 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
15313 khome=\EH, pad=^?, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
15315 # Datamedia DT80 soft switches:
15316 # 1 0=Jump 1=Smooth
15317 # Autorepeat 0=off 1=on
15318 # Screen 0=Dark 1=light
15319 # Cursor 0=u/l 1=block
15321 # 2 Margin Bell 0=off 1=on
15322 # Keyclick 0=off 1=on
15323 # ANSI/VT52 0=VT52 1=ANSI
15324 # Xon/Xoff 0=Off 1=On
15326 # 3 Shift3 0=Hash 1=UK Pound
15328 # Newline 0=Off 1=On
15329 # Interlace 0=Off 1=On
15331 # 4 Parity 0=Odd 1=Even
15332 # Parity 0=Off 1=On
15333 # Bits/Char 0=7 1=8
15334 # Power 0=60Hz 1=50Hz
15336 # 5 Line Interface 0=EIA 1=Loop
15337 # Aux Interface 0=EIA 1=Loop
15338 # Local Copy 0=Off 1=On
15341 # 6 Aux Parity 0=Odd 1=Even
15342 # Aux Parity 0=Off 1=On
15343 # Aux Bits/Char 0=7 1=8
15344 # CRT Saver 0=Off 1=On
15345 # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
15346 dm80|dmdt80|dt80|datamedia dt80/1,
15347 clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
15348 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15349 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
15350 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
15352 # except in 132 column mode, where it needs a little padding.
15353 # This is still less padding than the vt100, and you can always turn on
15354 # the ^S/^Q handshaking, so you can use vt100 flavors for things like
15356 dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
15358 clear=\E[H\E[2J$<50/>, cud1=\n,
15359 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
15360 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
15361 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
15362 dt80-sas|Datamedia DT803/DTX for SAS usage,
15365 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
15366 bel=^G, clear=^L, cr=\r,
15367 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
15368 cub1=^H, cud1=\EB, cuf1=^\,
15369 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
15370 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
15371 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n,
15372 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
15373 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
15374 smso=\E$2\004, tbc=\E'0,
15376 # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
15377 # These aren't end-all Excel termcaps; but do insert/delete char/line
15378 # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
15379 # The naming convention has been bent somewhat, with the use of E? (where
15380 # E is for 'Excel') as # a name. This was done to distinguish the entries
15381 # from the other Datamedias in use here, and yet to associate a model of
15382 # the Excel terminals with the regular datamedia terminals that share
15383 # major characteristics.
15384 excel62|excel64|datamedia Excel 62,
15385 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
15386 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
15388 excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
15389 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
15390 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
15392 excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
15393 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
15394 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
15395 smir=\E[4h, use=dt80,
15399 # Falco Data Products
15400 # 440 Potrero Avenue
15401 # Sunnyvale, CA 940864-196
15402 # Vox: (800)-325-2648
15403 # Fax: (408)-745-7860
15404 # Net: techsup@charm.sys.falco.com
15406 # Current Falco models as of 1995 are generally ANSI-compatible and support
15407 # emulations of DEC VT-series, Wyse, and Televideo types.
15410 # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
15411 # This terminal was released around 1983 and was discontinued long ago.
15412 # The standout and underline highlights are the same.
15413 falco|ts1|ts-1|falco ts-1,
15415 cols#80, it#8, lines#24,
15416 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
15417 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
15418 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
15419 ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
15420 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
15421 smir=\Eq, smso=\Eg1, smul=\Eg1,
15422 falco-p|ts1p|ts-1p|falco ts-1 with paging option,
15423 OTbs, am, da, db, mir, msgr, ul,
15424 cols#80, it#8, lines#24,
15425 bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B,
15426 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
15427 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
15428 il1=\EE, ind=\n, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
15429 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
15430 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
15431 smso=\Eg4, smul=\Eg1,
15432 # (ts100: I added <rmam>/<smam> based on the init string -- esr)
15433 ts100|ts100-sp|falco ts100-sp,
15434 am, mir, msgr, xenl, xon,
15435 cols#80, it#8, lines#24, vt#3,
15436 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15437 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
15438 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
15439 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
15440 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
15441 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
15442 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
15443 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
15444 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, is1=\E~)\E~ea,
15445 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15446 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
15447 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
15448 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15449 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
15450 %;m%?%p9%t\016%e\017%;$<2>,
15451 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
15452 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
15454 ts100-ctxt|falco ts-100 saving context,
15455 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
15457 #### Florida Computer Graphics
15460 # Florida Computer Graphics Beacon System, using terminal emulator program
15461 # "host.com", as provided by FCG. This description is for an early release
15462 # of the "host" program. Known bug: <ed> clears the whole screen, so it's
15465 # From: David Bryant <cbosg!djb> 1/7/83
15466 beacon|FCG Beacon System,
15469 bel=\ESTART\r\E37\r\EEND\r$<1>,
15470 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r,
15471 cub1=^H, cud1=\n, cuf1=\EV,
15472 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
15473 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
15474 ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
15475 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
15476 rmul=\ESTART\r\E60\,0\r\EEND\r,
15477 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
15478 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
15479 smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
15480 smul=\ESTART\r\E60\,1\r\EEND\r,
15485 # The f1720a differences from ANSI: no auto margin, destructive
15486 # tabs, # of lines, funny highlighting and underlining
15487 f1720|f1720a|fluke 1720A,
15489 cols#80, lines#16, xmc#1,
15490 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
15491 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
15492 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
15493 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
15494 smso=\E[7m, smul=\E[4m,
15496 #### Liberty Electronics (Freedom)
15498 # Liberty Electronics
15499 # 48089 Fremont Blvd
15501 # Vox: (510)-623-6000
15502 # Fax: (510)-623-7021
15504 # From: <faletti@berkeley.edu>
15505 # (f100: added empty <acsc> to suppress a tic warning;
15506 # made this relative to adm+sgr -- note that <invis> isn't
15507 # known to work for f100 but does on the f110. --esr)
15508 f100|freedom|freedom100|freedom model 100,
15509 OTbs, am, bw, hs, mir, msgr, xon,
15511 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n,
15512 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15513 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
15514 flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c,
15515 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>,
15516 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
15517 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
15518 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15519 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
15520 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
15521 vpa=\E[%p1%{32}%+%c, use=adm+sgr,
15522 f100-rv|freedom-rv|freedom 100 in reverse video,
15523 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
15524 # The f110 and f200 have problems with vi(1). They use the ^V
15525 # code for the down cursor key. When kcud1 is defined in terminfo
15526 # as ^V, the Control Character Quoting capability (^V in insert mode)
15527 # is lost! It cannot be remapped in vi because it is necessary to enter
15528 # a ^V to to quote the ^V that is being remapped!!!
15530 # f110/f200 users will have to decide whether
15531 # to lose the down cursor key or the quoting capability. We will opt
15532 # initially for leaving the quoting capability out, since use of VI
15533 # is not generally applicable to most interactive applications
15534 # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
15535 f110|freedom110|Liberty Freedom 110,
15538 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
15539 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
15540 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
15541 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
15542 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
15543 smso=\EG<, tsl=\Ef, use=f100,
15544 f110-14|Liberty Freedom 110 14inch,
15546 f110-w|Liberty Freedom 110 - 132 cols,
15547 cols#132, use=f110,
15548 f110-14w|Liberty Freedom 110 14in/132 cols,
15551 # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
15552 f200|freedom200|Liberty Freedom 200,
15553 OTbs, am, eslok, hs, mir, msgr, xon,
15554 cols#80, it#8, lines#24, wsl#80,
15555 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
15556 clear=^Z, cnorm=\E.1, cr=\r,
15557 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
15558 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
15559 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
15560 flash=\Eo$<200/>\En, fsl=\r, home=^^,
15561 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H,
15562 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
15563 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
15564 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15565 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
15566 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
15567 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
15568 f200-w|Liberty Freedom 200 - 132 cols,
15569 cols#132, use=f200,
15570 # The f200 has the ability to reprogram the down cursor key. The key is
15571 # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
15572 # so powering the terminal off and on will not cause the change to be lost.
15573 f200vi|Liberty Freedom 200 for vi,
15574 flash=\Eb$<200/>\Ed, kcud1=\n, use=f200,
15575 f200vi-w|Liberty Freedom 200 - 132 cols for vi,
15576 cols#132, use=f200vi,
15580 # Graphon Corporation
15581 # 544 Division Street
15582 # Campbell, CA 95008
15583 # Vox: (408)-370-4080
15584 # Fax: (408)-370-5047
15585 # Net: troy@graphon.com (Troy Morrison)
15588 # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
15589 # including one odd hybrid that starts out life on power-up as a character
15590 # terminal, than can be switched to X graphics mode (driven over the serial
15591 # line) by an escape sequence. No info on this beast yet.
15592 # (go140: I added <rmam>/<smam> based on the init string -- esr)
15593 go140|graphon go-140,
15595 cols#80, it#8, lines#24,
15596 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
15597 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
15598 ed=\E[J$<10/>, el=\E[K, ht=^I,
15599 if=/usr/share/tabset/vt100, il1=\E[L,
15600 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
15601 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
15602 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
15603 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
15604 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
15605 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
15606 go140w|graphon go-140 in 132 column mode,
15609 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
15611 # Hacked up vt200 termcap to handle GO-225/VT220
15612 # From: <edm@nwnexus.WA.COM>
15613 # (go225: I added <rmam>/<smam> based on the init string -- esr)
15614 go225|go-225|Graphon 225,
15615 OTbs, am, mir, xenl,
15616 cols#80, it#8, lines#25, vt#3,
15617 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
15618 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
15619 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
15620 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
15621 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
15622 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
15623 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
15624 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
15625 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
15626 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
15627 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
15628 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
15630 #### Harris (Beehive)
15632 # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
15633 # Their terminal group is ancient history now (1995) though the parent
15634 # company is still in business.
15637 # Beehive documentation is undated and marked Preliminary and has no figures
15638 # so we must have early Superbee2 (Model 600, according to phone conversation
15639 # with mfr.). It has proved reliable except for some missing padding
15640 # (notably after \EK and <nl> at bottom of screen).
15642 # The key idea is that AEP mode is poison for <cup> & that US's in
15643 # the local memory should be avoided like the plague. That means
15644 # that the 2048 character local buffer is used as 25 lines of 80
15645 # characters, period. No scrolling local memory, folks. It also
15646 # appears that we cannot use naked INS LINE feature since it uses
15647 # US. The sbi fakes <il1> with an 80-space insert that may be too
15648 # slow at low speeds; also spaces get converted to \040 which is
15649 # too long for some programs (not vi). DEL LINE is ok but slow.
15651 # The <nl> string is designed for last line of screen ONLY; cup to
15652 # 25th line corrects the motion inherent in scrolling to Page 1.
15654 # There is one understood bug. It is that the screen appears to
15655 # pop to a new (blank) page after a <nel>, or leave a half-line
15656 # ellipsis to a quad that is the extra 48 memory locations. The
15657 # data received is dumped into memory but not displayed. Not to
15658 # worry if <cup> is being used; the lines not displayed will be,
15659 # whenever the cursor is moved up there. Since <cup> is addressed
15660 # relative to MEMORY of window, nothing is lost; but beware of
15661 # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
15662 # therefore, is setenv MORE -c .
15664 # WARNING: Not all features tested.
15666 # Timings are assembled from 3 sources. Some timings may reflect
15667 # SB2/Model 300 that were used if more conservative.
15668 # Tested on a Model 600 at 1200 and 9600 bd.
15670 # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
15671 # placed on the keyboard and useless because of AEP, is made
15672 # into a backspace key. In use ESC must be pressed twice (to send)
15673 # and sending ^C must be prefixed by ESC to avoid that weird
15674 # transmit mode associated with ENTER key.
15676 # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
15677 # the screen, then it has dropped into ENTER mode; hit
15678 # RESET--ONLINE--!tset.
15680 # As delivered this machine has a FATAL feature that will throw
15681 # it into that strange transmit state (SPOW) if the space bar is
15682 # hit after a CR is received, but before receiving a LF (or a
15685 # The circuits MUST be modified to eliminate the SPOW latch.
15686 # This is done by strapping on chip A46 of the I/O board; cut
15687 # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
15688 # chip. This mod has been checked out on a Mod 600 of Superbee II.
15689 # With this modification absurdly high timings on cr are
15692 # NOTE WELL that the rear panel switch should be set to CR/LF,
15695 sb1|beehive superbee,
15696 OTbs, am, bw, da, db, mir, ul, xsb,
15697 cols#80, lines#25, xmc#1,
15698 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
15699 cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
15700 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
15701 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
15702 il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
15703 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
15704 \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
15705 \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
15706 ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
15707 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
15708 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
15709 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
15710 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
15711 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
15712 smso=\E_1, smul=\E_0, tbc=\E3,
15713 sbi|superbee|beehive superbee at Indiana U.,
15715 cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
15717 # Alternate (older) description of Superbee - f1=escape, f2=^C.
15718 # Note: there are at least 3 kinds of superbees in the world. The sb1
15719 # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
15720 # The sb3 puts garbage on the bottom of the screen when you scroll with
15721 # the switch in the back set to CRLF instead of AEP. This description
15722 # is tested on the sb2 but should work on all with either switch setting.
15723 # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
15724 # the other two if you want to try to hit that tiny escape key.
15725 # This description is tricky: being able to use cup depends on there being
15726 # 2048 bytes of memory and the hairy <nl> string.
15727 superbee-xsb|beehive super bee,
15729 cols#80, it#8, lines#25,
15730 clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
15731 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
15732 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
15733 home=\EH, ht=^I, hts=\E1,
15734 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
15735 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
15736 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
15737 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
15738 # This loses on lines > 80 chars long, use at your own risk
15739 superbeeic|super bee with insert char,
15740 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
15741 sb2|sb3|fixed superbee,
15742 xsb@, use=superbee,
15744 #### Beehive Medical Electronics
15746 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
15747 # Regarding your question though; Beehive terminals weren't made by Harris.
15748 # They were made by Beehive Medical Electronics in Utah. They went out of
15749 # business in the early '80s.
15751 # (OK, then, I don't know why a couple of these say "harris beehive".)
15754 # Reports are that most of these Beehive entries (except superbee) have not
15755 # been tested and do not work right. <rmso> is a trouble spot. Be warned.
15757 # (bee: <ich1> was empty, which is obviously bogus -- esr)
15758 beehive|bee|harris beehive,
15761 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
15762 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
15763 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
15764 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15765 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
15766 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
15767 smir=\EQ, smso=\EdP, smul=\Ed`,
15768 # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
15769 # good grief - does this entry make :sg:/:ug: when it doesn't have to?
15770 # look at those spaces in <rmso>/<smso>. Seems strange to me...
15771 # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
15772 # really care, cook up one using ^F -- esr)
15773 beehive3|bh3m|beehiveIIIm|harris beehive 3m,
15775 cols#80, it#8, lines#20,
15776 bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
15777 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
15778 il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
15779 beehive4|bh4|beehive 4,
15782 bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
15783 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n,
15784 # There was an early Australian kit-built computer called a "Microbee".
15785 # It's not clear whether this is for one of those or for a relative
15787 microb|microbee|micro bee series,
15789 cols#80, it#8, lines#24,
15790 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
15791 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15792 el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
15793 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
15794 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
15795 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
15797 # 8675, 8686, and bee from Cyrus Rahman
15798 # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
15799 ha8675|harris 8675,
15800 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
15801 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
15802 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
15804 # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
15806 ha8686|harris 8686,
15807 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
15808 \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
15809 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
15811 kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C,
15812 kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C,
15813 kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI,
15814 kf7=\ER, kf8=\EJ, kf9=\E(, use=bee,
15818 # Hazeltine appears to be out of the terminal business as of 1995. These
15819 # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
15820 # Harris. They have a hazeltine.com domain (but no web page there ) and can
15824 # 450 East Pulaski Road
15825 # Greenlawn, New York 11740
15827 # As late as 1993, manuals for the terminal product line could still be
15830 # TRW Customer Service Division
15833 # Fairfield, NJ 07007-2078
15835 # They're now (1998) a subsidiary of General Electric, operating under the
15836 # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
15837 # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
15840 # Since <cuf1> is blank, when you want to erase something you
15841 # are out of luck. You will have to do ^L's a lot to
15842 # redraw the screen. h1000 is untested. It doesn't work in
15843 # vi - this terminal is too dumb for even vi. (The code is
15844 # there but it isn't debugged for this case.)
15845 hz1000|hazeltine 1000,
15848 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
15850 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
15851 hz1420|hazeltine 1420,
15854 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
15855 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
15856 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y,
15858 # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
15859 # freakout with out-of-range args and tn3270. No hz since it needs to
15861 hz1500|hazeltine 1500,
15864 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
15865 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
15866 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
15867 il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P,
15868 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
15869 # h1510 assumed to be in sane escape mode. Else use h1500.
15870 # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
15871 # <smso=\E^Y>, but these caps were commented out in 8.3; also,
15872 # removed incorrect and overridden ":do=^J:" -- esr)
15873 hz1510|hazeltine 1510,
15876 bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
15877 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
15878 el=\E^O, il1=\E^Z, ind=\n,
15880 # The following switch settings are assumed for normal operation:
15881 # FULL CR U/L_CASE ESCAPE
15882 # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
15883 # Other switches may be set for operator convenience or communication
15885 hz1520|Hazeltine 1520,
15886 OTbs, am, bw, msgr,
15888 bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n,
15889 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
15890 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H,
15891 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
15892 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
15893 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
15894 # This version works with the escape switch off
15895 # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
15896 hz1520-noesc|hazeltine 1520,
15899 bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
15900 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
15901 home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_,
15902 # Note: the h1552 appears to be the first Hazeltine terminal which
15903 # is not braindamaged. It has tildes and backprimes and everything!
15904 # Be sure the auto lf/cr switch is set to cr.
15905 hz1552|hazeltine 1552,
15907 cud1=\n, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
15908 lf2=red, lf3=green, use=vt52,
15909 hz1552-rv|hazeltine 1552 reverse video,
15910 cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
15911 # Note: h2000 won't work well because of a clash between upper case and ~'s.
15912 hz2000|hazeltine 2000,
15915 bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
15916 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
15917 il1=~\032$<6>, ind=\n, pad=^?,
15918 # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
15919 # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
15920 # to work ok. There is one problem though if one types a lot of garbage
15921 # characters very fast vi seems not able to keep up and hangs while trying
15922 # to insert. That's in insert mode while trying to insert in the middle of
15923 # a line. It might be because the Esprit doesn't have insert char and delete
15924 # char as a built in function. Vi has to delete to end of line and then
15925 # redraw the rest of the line.
15926 esprit|Hazeltine Esprit I,
15929 bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K,
15930 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
15931 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H,
15932 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n,
15933 kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n,
15934 kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
15935 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
15936 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
15937 esprit-am|hazeltine esprit auto-margin,
15939 # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
15940 # Vi it seems always wants to send a control J for "do" and it turned out
15941 # that the terminal would work somewhat if the auto LF/CR was turned off.
15942 # (hmod1: removed :dn=~^K: -- esr)
15943 hmod1|Hazeltine Modular 1,
15946 bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
15947 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
15948 ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
15949 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
15951 # Hazeltine Executive 80 Model 30 (1554?)
15952 # from Will Martin <control@ALMSA-1.ARPA> via BRL
15953 # Like VT100, except for different "am" behavior.
15954 hazel|exec80|h80|he80|Hazeltine Executive 80,
15956 cols#80, it#8, lines#24, vt#3,
15957 OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
15958 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
15959 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
15960 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
15961 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
15962 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
15963 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
15964 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
15965 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
15966 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
15967 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15968 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
15974 ibm327x|line mode IBM 3270 style,
15976 clear=\r\n, el=\r, home=\r,
15978 ibm3101|i3101|IBM 3101-10,
15981 bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
15982 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15983 el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
15984 kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
15985 ibm3151|IBM 3151 display,
15986 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
15987 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
15988 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
15989 %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
15990 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
15991 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
15992 # removed kend, knp, kpp -TD
15994 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
15995 # Added ich1 (kich1 without ich1 doesn't make sense).
15996 # Added il1 (kil1 without il1 doesn't make sense).
15997 # Added xon (terminal uses XON/XOFF flow control).
15999 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
16000 OTbs, am, mir, msgr, xon,
16001 cols#80, it#8, lines#24,
16002 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
16004 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED,
16005 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16006 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
16007 ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2,
16008 kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16009 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
16010 kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
16011 kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
16012 kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
16013 kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
16014 kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
16015 kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
16016 kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
16017 rmcup=\E>A, rmso=\E4@, rmul=\E4@,
16018 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
16019 %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
16020 %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
16021 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
16023 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
16024 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
16026 # From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
16027 # Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
16030 ibm3162|IBM 3162 display,
16031 blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
16032 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
16035 # This really should not use setab/setaf, but it is clear that the
16036 # original terminfo does not toggle red/blue colors as in setb/setf.
16037 ibm3164|i3164|IBM 3164,
16039 colors#8, pairs#64,
16040 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
16041 setab=\E4 %p1%{64}%+%c,
16042 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
16043 smcup=\E!9/N\E>B, use=ibm3161,
16045 ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
16047 cols#80, it#8, lines#25,
16048 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16050 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
16051 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16052 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16053 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
16054 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
16055 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
16056 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
16057 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
16058 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
16059 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
16060 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
16061 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
16062 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
16063 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
16064 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
16065 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
16066 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
16067 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16068 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
16069 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
16070 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
16071 rmso=\E[m, rmul=\E[m, rs2=\Ec,
16072 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16074 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16076 ibmaed|IBM Experimental display,
16077 OTbs, am, eo, msgr,
16078 cols#80, it#8, lines#52,
16079 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
16080 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16081 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
16082 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
16083 rmso=\E0, sgr0=\E0, smso=\E0,
16084 ibm-apl|apl|IBM apl terminal simulator,
16085 lines#25, use=dm1520,
16086 # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
16087 # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
16088 ibmmono|IBM workstation monochrome,
16090 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
16091 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
16092 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
16093 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
16094 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
16095 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
16097 ibmega|IBM Enhanced Color Display,
16098 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16099 nel=\r\n, use=ibmmono,
16100 # This color scheme is assumed in some recent IBM terminal descriptions
16101 # (green on black, emulated on a 16-color terminal).
16102 ibm+color|IBM color definitions,
16103 colors#8, ncv#3, pairs#64,
16105 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
16106 %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
16107 %=%t46m%e%p1%{7}%=%t107m%;,
16108 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
16109 %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
16110 %=%t36m%e%p1%{7}%=%t97m%;,
16111 ibm+16color|IBM aixterm color definitions,
16112 colors#16, pairs#0x100,
16113 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
16114 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
16115 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16116 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16117 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
16118 %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
16119 ibm5154|IBM 5154 Color display,
16120 colors#8, ncv@, pairs#64,
16121 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16123 ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
16124 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
16126 ibmvga-c|IBM VGA display color termcap,
16127 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16128 nel=\r\n, use=ibmega-c,
16129 ibmvga|IBM VGA display,
16130 cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
16131 nel=\r\n, use=ibmega,
16132 # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
16133 rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
16135 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
16136 ibm6155|IBM 6155 Black & White display,
16137 blink@, bold@, use=ibm5151,
16138 # Advanced Monochrome (6153) and Color (6154) Graphics Display:
16139 ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
16141 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
16142 ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
16144 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
16146 ibm6154|IBM 6154 Color displays,
16147 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16148 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16150 sgr0=\E[0;10m, use=ibm5154,
16151 ibm6153|IBM 6153 Black & White display,
16152 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
16153 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16155 sgr0=\E[0;10m, use=ibm5151,
16156 ibm6153-90|IBM 6153 Black & White display,
16158 blink@, bold@, use=ibm5151,
16159 ibm6153-40|IBM 6153 Black & White display,
16160 cols#40, lines#12, use=ibm6153-90,
16161 ibm8512|ibm8513|IBM color VGA Terminal,
16163 cols#80, it#8, lines#25,
16164 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
16165 clear=\E[H\E[J, cub1=\E[D, cud1=\n, cuf1=\E[C,
16166 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
16167 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
16168 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
16169 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
16170 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16171 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
16172 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
16173 rmir=\E[4l, rmso=\E[m, rmul=\E[m,
16174 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
16175 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
16176 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16178 hft-c|HFT with Color,
16179 colors#8, pairs#64,
16180 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
16181 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
16182 use=ibm5151, use=ibm+color,
16183 hft-c-old|HFT with Color PC850,
16184 colors#8, pairs#64,
16185 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
16187 hft-old|AIWS High Function Terminal,
16190 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
16191 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16192 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
16193 ht=^I, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, kbs=^H,
16194 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
16195 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
16196 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
16197 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
16198 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
16199 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
16200 ibm-system1|system1|ibm system/1 computer,
16203 bel=^G, clear=^Z, cub1=^H, cuf1=^\,
16204 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
16206 # lft-pc850 : IBM Low Function Terminal Device
16207 # lft "supports" underline, bold, and blink in the sense that the lft code
16208 # sets all the right bits. HOWEVER, depending upon the adapter, these
16209 # attributes may or may not be supported by the device driver.
16210 lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
16212 cols#80, it#8, lines#25,
16213 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
16215 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
16216 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16217 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16218 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16219 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
16220 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
16221 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
16222 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
16223 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
16224 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
16225 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
16226 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
16227 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
16228 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
16229 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
16230 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
16231 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
16232 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
16233 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
16234 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
16235 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
16236 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
16237 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16238 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
16239 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16241 # "Megapel" refers to the display adapter, which was used with the IBM RT
16243 ibm5081|hft|IBM Megapel Color display,
16244 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
16245 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
16246 ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
16249 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
16251 ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
16253 ibm8514|IBM 8514/a color VGA display,
16255 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
16256 ibm8514-c|IBM 8514 color display with standout and underline,
16259 cr=\r, cud1=\n, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=\n,
16260 kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, tsl=\Ej\EYI%+ \Eo,
16264 # AIX entries. IBM ships these with AIX 3.2.5.
16265 # -- added rc, sc based on manpage -TD
16266 # Note that we could use ibm+16color, but that is not how IBM defines this one.
16267 aixterm|IBM Aixterm Terminal Emulator,
16269 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16270 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
16271 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16272 %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
16273 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
16274 aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
16276 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
16277 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
16278 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16280 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
16281 aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
16283 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
16284 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
16286 tsl=\E[?%p1%dT, use=ibm6153,
16287 jaixterm|IBM Kanji Aixterm Terminal Eemulator,
16288 acsc@, use=aixterm,
16289 jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
16290 acsc@, use=aixterm-m,
16292 # This flavor is adapted from xterm, in turn from aixterm documentation -TD
16293 aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
16294 use=ibm+16color, use=aixterm,
16296 #### Infoton/General Terminal Corp.
16299 # gt100 sounds like something DEC would come out with. Let's hope they don't.
16300 i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
16303 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
16304 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
16305 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
16306 ind=\n, rmso=\Ea, smso=\Eb,
16310 bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
16311 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
16312 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
16313 il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
16314 # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
16318 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y,
16319 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=\n, ll=^H^\,
16320 # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
16324 bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
16325 ed=^K, ind=\n, ll=^H^\,
16327 # The ICL6402 was actually the Kokusai Display System 6402.
16328 # The 6404 was the KDS7372 (color version of the 6402).
16330 # ICL6404 control codes follow:
16333 #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
16334 #ctrl-A set SOM position at cursor position
16337 #ctrl-I Horizontal tab
16340 #ctrl-L Cursor right
16341 #ctrl-M Carriage return
16342 #ctrl-N Disable xon/xoff to host
16343 #ctrl-O Enable xon/xoff to host
16344 #ctrl-R Enable bidirectional mode
16345 #ctrl-T Disable bidirectional mode
16346 #ctrl-V Cursor down
16347 #ctrl-Z Clear unprotected data to insert char
16348 #ctrl-^ Cursor home
16351 #ESC lead-in char for multiple character command
16353 #ESC space R execute power on sequence
16354 #ESC ! p1 p2 define scroll region:
16355 # p1 = scroll top line: 20h - 37h
16356 # p1 = scroll bottom line: 20h - 37h
16357 #ESC " unlock keyboard
16358 #ESC # lock keyboard
16359 #ESC $ Semi-graphics mode on
16360 #ESC % Semi-graphics mode off
16361 #ESC & protect mode on
16362 #ESC ' protect mode off
16363 #ESC ( write protect mode off (full intensity)
16364 #ESC ) write protect mode on (half intensity)
16366 #ESC * clear screen
16367 #ESC + clear unprotected data to insert char
16368 #ESC , clear unprotected data to half intensity spaces
16369 #ESC - p1 p2 p3 p4 address cursor to page, row, column:
16370 # p1 = page number 0 - 3
16371 # p2 = row 20h - 7fh
16372 # p3 = column (lo) 20h - 7fh
16373 # p4 = column (hi) 20h - 21h (only 132 col)
16374 #ESC . p1 set cursor style:
16375 # p1 = 0 invisible cursor
16376 # p1 = 1 block blinking cursor
16377 # p1 = 2 block steady cursor
16378 # p1 = 3 underline blinking cursor
16379 # p1 = 4 underline steady cursor
16380 #ESC / transmit cursor location (page, row, column)
16381 #ESC 0 p1 p2 p3 p4 program edit key:
16382 # p1 = edit key code: '@'-'S', '`'-'s'
16383 # p2 p3 p4 = program data (3 bytes)
16386 #ESC 2 clear tab at cursor
16387 #ESC 3 clear all tabs
16388 #ESC 4 send unprotect line to cursor
16389 #ESC 5 send unprotect page to cursor
16390 #ESC 6 send line to cursor
16391 #ESC 7 send page to cursor
16392 #ESC 8 n set scroll mode:
16393 # n = 0 set jump scroll
16394 # n = 1 set smooth scroll
16395 #ESC 9 n control display:
16396 # n = 0 display off
16398 #ESC : clear unprotected data to null
16399 #ESC ; clear unprotected data to insert char
16402 #ESC = p1 p2 address cursor to row, column
16403 # p1 = row 20h - 7fh
16404 # p2 = column (lo) 20h - 7fh
16405 # p3 = column (hi) 20h - 21h (only 132 col)
16406 #ESC > keyclick off
16407 #ESC ? transmit cursor location (row, column)
16409 #ESC @ copy print mode on
16410 #ESC A copy print mode off
16411 #ESC B block mode on
16412 #ESC C block mode off (conversation mode)
16413 #ESC D F set full duplex
16414 #ESC D H set half duplex
16416 #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
16417 # 0 = black, 1 = red, 2 = green, 3 = yellow
16418 # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
16419 #ESC G n set serial field attribute (n = 30h - 3Fh)
16420 #ESC H n full graphics mode:
16421 # n = 0 exit full graphics mode
16422 # n = 1 enter full graphics mode
16425 #ESC K forward page
16427 #ESC L unformatted page print
16428 #ESC M L move window left (132 col mode only)
16429 #ESC M R move window right (132 col mode only)
16430 #ESC N set page edit (clear line edit)
16431 #ESC O set line edit (clear page edit)
16432 #ESC P formatted page print
16433 #ESC Q character insert
16435 #ESC S send message unprotected only
16436 #ESC T erase line to insert char
16437 #ESC U set monitor mode (see ESC X, ESC u)
16439 #ESC V n select video attribute mode:
16440 # n = 0 serial field attribute mode
16441 # n = 1 parallel character attribute mode
16442 #ESC V 2 n define line attribute:
16443 # n = 0 single width single height
16444 # n = 1 single width double height
16445 # n = 2 double width single height
16446 # n = 3 double width double height
16447 #ESC V 3 n select character font:
16448 # n = 0 system font
16449 # n = 1 user defined font
16450 #ESC V 4 n select screen mode:
16451 # n = 0 page screen mode
16452 # n = 1 virtual screen mode
16453 #ESC V 5 n control mouse mode:
16454 # n = 0 disable mouse
16455 # n = 1 enable sample mode
16456 # n = 2 send mouse information
16457 # n = 3 enable request mode
16458 #ESC W character delete
16459 #ESC X clear monitor mode (see ESC U, ESC u)
16460 #ESC Y erase page to insert char
16462 #ESC Z n send user/status line:
16463 # n = 0 send user line
16464 # n = 1 send status line
16465 # n = 2 send terminal ID
16466 #ESC [ p1 p2 p3 set character attribute (parallel char mode):
16470 # 3 = blink blank (= blank)
16472 # 5 = reverse blank
16473 # 6 = reverse blink
16474 # 7 = reverse blink blank (= reverse blank)
16476 # 9 = underline blank
16477 # : = underline blink
16478 # ; = underline blink blank
16479 # < = reverse underline
16480 # = = reverse underline blank
16481 # > = reverse underline blink
16482 # ? = reverse underline blink blank
16483 # p2, p3: f/grnd, b/grnd colour
16484 # (see ESC F for colours)
16485 # use ZZ for mono, eg.
16486 # ESC [ 0 Z Z for normal
16487 # ESC [ 4 Z Z for inverse etc.
16489 #ESC \ n set page size:
16490 # n = 1 24 lines/page
16491 # n = 2 48 lines/page
16492 # n = 3 72 lines/page
16493 # n = 4 96 lines/page
16494 #ESC ] n set Wordstar mode:
16495 # n = 0 normal (KDS7372) mode
16496 # n = 1 Wordstar mode
16498 #ESC b set foreground colour screen
16500 #ESC c n enter self-test mode:
16501 # n = 0 exit self test mode
16505 # n = 4 screen display test
16506 # n = 5 main/printer port test
16507 # n = 6 mouse port test
16508 # n = 7 graphics board test
16509 # n = 8 graphics memory test
16510 # n = 9 display all 'E'
16511 # n = : display all 'H'
16512 #ESC d set background colour screen
16514 #ESC e n program insert char (n = insert char)
16515 #ESC f text CR load user status line with 'text'
16517 #ESC g display user status line on 25th line
16518 #ESC h display system status line on 25th line
16520 #ESC j reverse linefeed
16521 #ESC k n duplex/local edit mode:
16522 # n = 0 duplex edit mode
16523 # n = 1 local edit mode
16524 #ESC l n select virtual screen:
16527 #ESC m save current config to NVRAM
16528 #ESC n p1 select display screen:
16533 #ESC o p1 p2 set characters/line and attribute:
16534 # p1 = 0 80 chars/line
16536 #ESC o p1 p2 set characters/line and attribute:
16537 # p1 = 0 80 chars/line
16538 # p1 = 1 132 chars/line
16539 # p2 = 0 single width single height
16540 # p2 = 1 single width double height
16541 # p2 = 2 double width single height
16542 # p2 = 3 double width double height
16544 #ESC q insert mode on
16545 #ESC r edit mode on
16546 #ESC s send message all
16547 #ESC t erase line to null
16548 #ESC u clear monitor mode (see ESC U, ESC X)
16549 #ESC v autopage mode on
16550 #ESC w autopage mode off
16551 #ESC x p1 p2 p3 define delimiter code...
16552 #ESC y erase page to null
16554 #ESC z 2 p1 p2 p3 p4 draw quadrangle:
16555 # p1 = starting row
16556 # p2 = starting column
16560 #ESC { p1 p2 p3 p4 configure main port
16561 # (baud, stop bits, parity, word length)
16563 #ESC | p1 p2 text Ctrl-Y program function key with 'text':
16564 # p1 = function key code:
16565 # '1' - ';' normal f1- f11
16566 # '<' - 'F' shifted f1 - f11
16567 # p2 = program mode:
16571 # Ctrl-Y = terminator
16572 # (use Ctrl-P to escape ^P, ^Y )
16574 #ESC } p1 p2 p3 p4 configure printer port
16575 # (baud, stop bits, parity, word length)
16576 #ESC ~ send system status
16578 # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
16580 # Entry is by esr going solely on above information and is UNTESTED.
16581 # This actually looks a lot like a Televideo 9xx.
16582 # This entry uses page 0 and is monochrome; I'm not brave enough to try
16583 # to make color work without a test terminal. The <am> capability is a guess.
16584 # The initialization string sets conversation mode, blinking underline cursor,
16585 # full duplex, parallel attribute mode, display user status line, white
16586 # foreground, black background, normal highlight.
16588 icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
16591 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
16592 cnorm=\E.3, cr=\r, csr=\E!%+%p1%{32}%+%p2%{32}, cub1=^H,
16594 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
16595 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
16596 hts=\E1, il1=\EE, invis=\E[1ZZ,
16597 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
16598 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
16599 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
16600 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
16601 %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
16602 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
16603 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
16604 rs2=\Eo1, use=icl6404,
16606 #### Interactive Systems Corp
16608 # ISC used to sell OEMed and customized hardware to support ISC UNIX.
16609 # ISC UNIX still exists in 1995, but ISC itself is no more; they got
16610 # bought out by Sun.
16613 # From: <cithep!eric> Wed Sep 16 08:06:44 1981
16614 # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
16615 # ":le=^_:" later overridden -- esr)
16616 intext|Interactive Systems Corporation modified owl 1200,
16618 cols#80, it#8, lines#24, xmc#1,
16619 bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n,
16620 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
16621 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
16622 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H,
16623 kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
16624 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
16625 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
16626 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
16628 intext2|intextii|INTERACTIVE modified owl 1251,
16630 cols#80, lines#24, xmc#0,
16631 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=\E[D,
16632 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16633 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
16634 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
16635 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
16636 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
16637 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
16638 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
16639 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
16640 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
16641 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
16644 #### Kimtron (abm, kt)
16646 # Kimtron seems to be history, but as March 1998 these people are still
16647 # offering repair services for Kimtron equipment:
16649 # Com/Pair Monitor Service
16650 # 1105 N. Cliff Ave.
16651 # Sioux Falls, South Dakota 57103
16653 # WATS voice: 1-800/398-4946
16654 # POTS fax: +1 605/338-8709
16655 # POTS voice: +1 605/338-9650
16656 # Email: <compair@sd.cybernex.net>
16657 # Internet/Web: <http://www.com-pair.com>
16659 # Kimtron entries include (undocumented) codes for: enter dim mode,
16660 # enter bold mode, enter reverse mode, turn off all attributes.
16663 # Kimtron ABM 85 added by Dual Systems
16664 # (abm85: removed duplicated ":kd=^J:" -- esr)
16665 abm85|Kimtron ABM 85,
16666 OTbs, am, bw, msgr,
16667 cols#80, it#8, lines#24, xmc#1,
16668 cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L,
16669 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16670 dl1=\ER, ed=\Ey, el=\Et, ht=^I,
16671 if=/usr/share/tabset/stdcrt, il1=\EE,
16672 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
16673 kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
16674 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
16675 # Kimtron ABM 85H added by Dual Systems.
16676 # Some notes about the abm85h entries:
16677 # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
16678 # firmware revs prior to SP51
16679 # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
16680 # abm85e entry if it is in tvi920 emulation mode. They are incompatible
16681 # in some places and NOT software settable i.e., <is2> can't fix it)
16682 # 3) In 85h mode, the arrow keys and special functions transmit when
16683 # the terminal is in dup-edit, and work only locally in local-edit.
16684 # Vi won't swallow `del char' for instance, but <smcup> turns on
16685 # dup-edit anyway so that the arrow keys will work right. If the
16686 # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
16687 # <is2>. Note that 920E mode does not have software commands to toggle
16688 # between dup and local edit, so you get whatever was set last on the
16690 # 4) <flash> attribute is nice, but seems too slow to work correctly
16692 # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
16693 # are selected, the <xmc@> entry should be removed.
16694 # 6) auto new-line should be on (selectable from setup mode only)
16696 # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
16697 abm85h|Kimtron ABM 85H native mode,
16700 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
16702 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
16704 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
16706 abm85e|Kimtron ABM 85H in 920E mode,
16708 bel=^G, dim=\E), flash@,
16709 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
16711 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
16712 abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
16715 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
16717 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
16718 # From: <malman@bbn-vax.arpa>
16719 # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
16720 kt7|kimtron model kt-7,
16722 cols#80, it#8, lines#24,
16723 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
16724 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16725 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
16726 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
16727 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
16728 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
16729 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16730 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16731 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
16732 # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
16733 # other kt7 entry and the adjacent key capabilities). Removed EE which is
16734 # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
16735 # but we can't figure out what.
16736 kt7ix|kimtron model kt-7 or 70 in IX mode,
16738 cols#80, it#8, lines#25,
16739 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
16740 civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V,
16741 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
16742 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r,
16743 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n,
16744 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
16745 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
16746 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
16747 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16748 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
16749 nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
16750 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
16752 #### Microdata/MDIS
16754 # This was a line of terminals made by McDonnell-Douglas Information Systems.
16755 # These entries come direct from MDIS documentation. I have edited them only
16756 # to move primary names of the form p[0-9] * to aliases, and to comment out
16757 # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
16758 # also removed the change history; the last version indicates this is
16759 # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
16762 # McDonnell Information Systems Terminal Family History
16763 # =========================================
16765 # Prism-1, Prism-2 and P99:
16766 # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
16768 # Prism-4 and Prism-5:
16769 # Slightly less ancient range of Microdata terminals. Follow-on from
16770 # Prism-2, but with many enhancements. P5 has eight display pages.
16773 # A special terminal for use with library systems, primarily in Germany.
16774 # Limited numbers. Similar functionality to P5 (except attributes?).
16776 # Prism-7, Prism-8 and Prism-9:
16777 # More recent range of MDIS terminals, in which P7 and P8
16778 # replace the P4 & P5, with added functionality, and P9 is the flagship.
16779 # The P9 has two emulation modes - P8 and ANSI - and includes a
16780 # large number of the DEC VT220 control sequences. Both
16781 # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
16783 # Prism-12 and Prism-14:
16784 # Latest range, functionally very similar to the P9. The P14 has a
16785 # black-on-white overscanning screen.
16787 # The terminfo definitions given here are:
16789 # p2 - Prism-2 (or Prism-1 or P99).
16791 # p4 - Prism-4 (and older P7s & P8s).
16792 # p5 - Prism-5 (or Prism-6).
16795 # p8 - Prism-8 (in national or multinational mode).
16796 # p8-w - 132 column version of p8.
16797 # p9 - Prism-9 in ANSI mode.
16798 # p9-w - 132 column version of p9.
16799 # p9-8 - Prism-9 in Prism-8 emulation mode.
16800 # p9-8-w - As p9-8, but with 132 columns.
16802 # p12 - Prism-12 in ANSI mode.
16803 # p12-w - 132 column version of p12.
16804 # p12-m - Prism-12 in MDC emulation mode.
16805 # p12-m-w - As p12-m, but with 132 columns.
16806 # p14 - Prism-14 in ANSI mode.
16807 # p14-w - 132 column version of p14.
16808 # p14-m - Prism-14 in MDC emulation mode.
16809 # p14-m-w - As p14-m, but with 132 columns.
16814 # Includes Prism-1 and basic P99 without SP or MP loaded.
16815 # The simplest form of Prism-type terminal.
16816 # Basic cursor movement and clearing operations only.
16817 # No video attributes.
16819 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
16820 # value up, followed by backspace.
16822 prism2|MDC Prism-2,
16825 bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
16826 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
16827 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16828 cuu1=^Z, ed=\EJ, el=\EK, home=^A,
16829 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
16830 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16831 ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
16836 # Includes early versions of P7 & P8.
16837 # Basic family definition for most Prisms (except P2 and P9 ANSI).
16839 # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
16840 # value up, followed by backspace.
16841 # Cursor key definitions removed because they interfere with vi and csh keys.
16843 prism4|p4|P4|MDC Prism-4,
16844 am, bw, hs, mc5i, msgr,
16845 cols#80, lines#24, wsl#72, xmc#1,
16846 bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>,
16847 cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
16848 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
16849 %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16850 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
16851 fsl=\035\345, home=^A,
16852 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
16853 %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
16854 ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
16855 rev=^CD, rmso=^C\s, rmul=^C\s,
16856 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
16857 %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
16858 sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343,
16859 vpa=\013%p1%{32}%+%c,
16864 # Same definition as p4. Includes Prism-6 (not tested!).
16865 # Does not use any multi-page features.
16867 prism5|p5|P5|MDC Prism-5,
16873 # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
16875 # Use p4 for very early models of P7.
16876 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16878 prism7|p7|P7|MDC Prism-7,
16879 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
16884 # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
16885 # Supports national and multinational character sets.
16887 # Alternate char set operations only work in multinational mode.
16888 # Use p4 for very early models of P8.
16889 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16890 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
16892 prism8|p8|P8|MDC Prism-8,
16893 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
16894 vpa=\E[%i%p1%dd, use=p4,
16896 # p8-w: Prism-8 in 132 column mode
16897 # --------------------------------
16899 # 'Wide' version of p8.
16901 # Rev-index removed; can't send nulls to terminal in 8-bit modes.
16903 prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
16905 is2=\E[<12h\E[<14h, use=p8,
16907 # p9: Prism-9 in ANSI mode
16908 # -------------------------
16910 # The "flagship" model of this generation of terminals.
16911 # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
16913 # Tabs only reset by "reset". Otherwise assumes default (8 cols).
16914 # Fixes to deal with terminal firmware bugs:
16915 # . 'ri' uses insert-line since rev index doesn't always
16916 # . 'sgr0' has extra '0' since esc[m fails
16917 # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
16918 # Not covered in the current definition:
16920 # . Programming Fn keys
16921 # . Graphic characters (defaults correctly to vt100)
16922 # . Padding values (sets xon)
16923 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
16925 prism9|p9|P9|MDC Prism-9 in ANSII mode,
16926 am, bw, hs, msgr, xenl, xon,
16927 cols#80, it#8, lines#24, vt#3, wsl#72,
16928 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
16929 clear=^L, cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v,
16930 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
16931 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16932 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16933 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
16934 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
16935 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
16936 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
16937 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
16938 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
16939 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
16940 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
16941 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
16942 khome=\E[H, nel=\r\n, prot=\E[32%{, rc=\E[%z,
16943 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
16944 rmso=\E[27m, rmul=\E[24m,
16945 rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
16948 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
16949 %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
16950 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
16951 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
16954 # p9-w: Prism-9 in 132 column mode
16955 # --------------------------------
16957 # 'Wide' version of p9.
16959 prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
16961 is2=\E[&p\E[<12l\E F\E[<14h,
16962 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
16964 # p9-8: Prism-9 in P8 mode
16965 # ------------------------
16967 # P9 terminal in P8 emulation mode.
16968 # Similar to p8 definition.
16969 # Insertion and deletion operations possible.
16971 prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
16972 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16973 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
16975 # p9-8-w: Prism-9 in P8 and 132 column modes
16976 # ------------------------------------------
16978 # P9 terminal in P8 emulation mode and 132 column mode.
16980 prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
16981 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
16982 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
16984 # p12: Prism-12 in ANSI mode
16985 # ---------------------------
16987 # See p9 definition.
16989 prism12|p12|P12|MDC Prism-12 in ANSI mode,
16992 # p12-w: Prism-12 in 132 column mode
16993 # ----------------------------------
16995 # 'Wide' version of p12.
16997 prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
17000 # p12-m: Prism-12 in MDC emulation mode
17001 # -------------------------------------
17003 # P12 terminal in MDC emulation mode.
17004 # Similar to p8 definition.
17005 # Insertion and deletion operations possible.
17007 prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
17010 # p12-m-w: Prism-12 in MDC emulation and 132 column modes
17011 # -------------------------------------------------------
17013 # P12 terminal in MDC emulation mode and 132 column mode.
17015 prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
17018 # p14: Prism-14 in ANSII mode
17019 # ---------------------------
17021 # See p9 definition.
17023 prism14|p14|P14|MDC Prism-14 in ANSII mode,
17026 # p14-w: Prism-14 in 132 column mode
17027 # ----------------------------------
17029 # 'Wide' version of p14.
17031 prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
17034 # p14-m: Prism-14 in MDC emulation mode
17035 # -------------------------------------
17037 # P14 terminal in MDC emulation mode.
17038 # Similar to p8 definition.
17039 # Insertion and deletion operations possible.
17041 prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
17044 # p14-m-w: Prism-14 in MDC emulation and 132 column modes
17045 # -------------------------------------------------------
17047 # P14 terminal in MDC emulation mode and 132 column mode.
17049 prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
17052 # End of McDonnell Information Systems Prism definitions
17054 # These things were popular in the Pick database community at one time
17055 # From: George Land <georgeland@aol.com> 24 Sep 1996
17056 p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
17058 cols#80, lines#24, ma#1, wsl#78, xmc#1,
17059 bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F,
17060 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
17061 ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U,
17062 kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
17063 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
17064 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
17065 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17066 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
17067 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r,
17068 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
17071 #### Microterm (act, mime)
17073 # The mime1 entries refer to the Microterm Mime I or Mime II.
17074 # The default mime is assumed to be in enhanced act iv mode.
17077 # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
17078 # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
17079 # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
17080 # since Sytek insists ^S means xoff.
17081 # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
17082 act4|microterm|microterm act iv,
17085 bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X,
17086 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
17087 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
17088 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
17089 il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X,
17091 # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
17092 # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
17093 # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
17094 act5|microterm5|microterm act v,
17095 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
17097 # Mimes using brightness for standout. Half bright is really dim unless
17098 # you turn up the brightness so far that lines show up on the screen.
17099 mime-fb|full bright mime1,
17100 is2=^S\E, rmso=^S, smso=^Y, use=mime,
17101 mime-hb|half bright mime1,
17102 is2=^Y\E, rmso=^Y, smso=^S, use=mime,
17103 # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
17104 # the more plausible ":do=^J:" -- esr)
17105 # uc was at one time disabled to get around a curses bug, be wary of it
17106 mime|mime1|mime2|mimei|mimeii|microterm mime1,
17108 cols#80, it#8, lines#24, vt#9,
17109 bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X,
17110 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
17111 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
17112 il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K,
17113 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
17114 # These termcaps (for mime2a) put the terminal in low intensity mode
17115 # since high intensity mode is so obnoxious.
17116 mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
17119 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17120 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
17121 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
17122 il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n,
17123 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
17124 smir=\EE, smso=\E\:, smul=\E6,
17125 # This is the preferred mode (but ^X can't be used as a kill character)
17126 mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
17128 cols#80, it#8, lines#24,
17129 bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17130 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
17131 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
17132 il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, kcub1=\ED,
17133 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
17134 rmul=\E5, smir=^O, smso=\E8, smul=\E4,
17135 # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
17136 mime3a|mime1 emulating 3a,
17138 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
17139 mime3ax|mime-3ax|mime1 emulating enhanced 3a,
17141 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
17143 # Wed Mar 9 18:53:21 1983
17144 # We run our terminals at 2400 baud, so there might be some timing problems at
17145 # higher speeds. The major improvements in this model are the terminal now
17146 # scrolls down and insert mode works without redrawing the rest of the line
17147 # to the right of the cursor. This is done with a bit of a kludge using the
17148 # exit graphics mode to get out of insert, but it does not appear to hurt
17149 # anything when using vi at least. If you have some users using act4s with
17150 # programs that use curses and graphics mode this could be a problem.
17151 mime314|mm314|mime 314,
17154 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
17155 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
17156 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
17157 # Microterm mime 340 from University of Wisconsin
17158 mm340|mime340|mime 340,
17160 clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
17161 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
17162 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
17163 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,,
17164 kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n,
17165 # This came from University of Wisconsin marked "astro termcap for jooss".
17166 # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
17167 # also added <rmam>/<smam> based on the init string -- esr)
17168 mt4520-rv|micro-term 4520 reverse video,
17169 am, hs, msgr, xenl, xon,
17170 cols#80, it#8, lines#24, wsl#80,
17171 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=\r,
17172 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
17173 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
17174 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
17175 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
17176 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
17177 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
17178 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
17179 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
17181 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
17182 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
17183 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
17184 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
17185 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
17186 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
17187 tbc=\E[g, tsl=\E[25;1H,
17189 # Fri Aug 5 08:11:57 1983
17190 # This entry works for the ergo 4000 with the following setups:
17191 # ansi,wraparound,newline disabled, xon/xoff disabled in both
17194 # WARNING!!! There are multiple versions of ERGO 4000 microcode
17195 # Be advised that very early versions DO NOT WORK RIGHT !!
17196 # Microterm does have a ROM exchange program- use it or lose big
17197 # (ergo400: added <rmam>/<smam> based on the init string -- esr)
17198 ergo4000|microterm ergo 4000,
17201 bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H, cud1=\E[B,
17202 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
17203 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
17204 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
17205 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
17206 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
17207 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
17208 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
17209 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
17210 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
17215 # NCR's terminal group was merged with AT&T's when AT&T bought the company.
17216 # For what happened to that group, see the ADDS section.
17218 # There is an NCR4103 terminal that's just a re-badged Wyse-50.
17221 # The following vendor-supplied termcaps were captured from the Boundless
17222 # Technologies site, 8 March 1998. I removed all-upper-case names that were
17223 # identical, except for case, to lower-case ones. I also uncommented the acsc
17226 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17227 # DEC vt200/300 with color capabilities added.
17228 ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17229 colors#8, pairs#64,
17230 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17232 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17233 # DEC vt200/300 with color capabilities added.
17234 ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
17235 colors#8, pairs#64,
17236 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17237 use=ncr260vt300wan,
17238 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17239 # DEC vt200/300 with color capabilities added.
17240 ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
17241 colors#8, pairs#64,
17242 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17244 # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
17245 # DEC vt200/300 with color capabilities added.
17246 ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
17247 colors#8, pairs#64,
17248 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
17249 use=ncr260vt300wpp,
17250 # This definition for ViewPoint supports several attributes. This means
17251 # that it has magic cookies (extra spaces where the attributes begin).
17252 # Some applications do not function well with magic cookies. The System
17253 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17254 # If supporting various attributes is not vital, 'xmc#1' and the extra
17255 # attributes can be removed.
17256 # Mapping to ASCII character set ('acsc' capability) can also be
17257 # restored if needed.
17258 ncr260vppp|NCR 2900_260 viewpoint,
17259 am, bw, hs, km, mc5i, mir, msgr, xon,
17260 cols#80, lines#24, nlab#32, xmc#1,
17261 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17262 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
17263 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
17264 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
17265 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
17266 el=\EK$<2>, fsl=\r, home=\036$<2>, ht=^I, hts=\E1,
17267 il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
17268 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17270 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
17271 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F,
17272 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=\002\:\r,
17273 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
17274 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
17275 kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r,
17276 kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r,
17277 kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r,
17278 kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
17279 kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP,
17280 ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
17281 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
17282 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
17283 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17284 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17286 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
17287 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
17288 ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
17290 cup=\Ea%i%p1%dR%p2%dC$<30>,
17291 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17293 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
17296 ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
17297 am, hs, mir, msgr, xenl, xon,
17298 cols#80, lines#24, nlab#32,
17299 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17300 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17301 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17302 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
17303 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17304 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17305 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17306 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17307 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17308 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
17309 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
17310 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
17311 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
17313 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17315 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17316 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
17317 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
17318 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
17319 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
17320 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17323 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17324 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17325 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
17326 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
17327 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
17328 ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
17330 cup=\E[%i%p1%d;%p2%dH$<30>,
17331 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17333 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17336 ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
17337 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17339 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17340 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17341 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
17342 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
17343 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17345 smkx=\E=, use=ncr260vt100an,
17346 ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
17348 cup=\E[%i%p1%d;%p2%dH$<30>,
17349 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17351 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17354 ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
17355 am, hs, mir, msgr, xenl, xon,
17356 cols#80, lines#24, nlab#32,
17357 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17358 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17359 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17360 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
17361 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17362 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17363 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17364 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17365 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17366 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
17367 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
17368 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
17369 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
17370 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17372 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17373 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
17374 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
17375 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
17376 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
17377 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
17378 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
17379 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
17380 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
17381 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
17382 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
17383 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
17384 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
17385 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
17386 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17389 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17390 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17391 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
17392 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17393 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
17395 ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
17397 cup=\E[%i%p1%d;%p2%dH$<30>,
17398 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
17399 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
17400 ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
17401 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17402 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17403 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17404 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
17406 ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
17408 cup=\E[%i%p1%d;%p2%dH$<30>,
17409 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17411 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
17414 ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
17415 am, hs, mir, msgr, xenl, xon,
17416 cols#80, lines#24, nlab#32,
17417 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
17418 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
17419 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
17420 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
17421 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
17422 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
17423 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
17424 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
17425 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
17426 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
17427 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
17428 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
17429 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
17430 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17432 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
17433 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
17434 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
17435 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
17436 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
17437 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
17438 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
17439 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
17440 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
17441 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17442 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
17443 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
17444 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
17446 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17449 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17450 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
17451 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
17452 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
17453 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
17455 ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
17457 cup=\E[%i%p1%d;%p2%dH$<30>,
17458 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
17460 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
17463 ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
17464 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
17465 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
17466 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
17467 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
17469 NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
17471 cup=\E[%i%p1%d;%p2%dH$<30>,
17472 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17474 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
17477 # This terminfo file contains color capabilities for the Wyse325 emulation of
17478 # the NCR 2900/260C color terminal. Because of the structure of the command
17479 # (escape sequence) used to set color attributes, one of the fore/background
17480 # colors must be preset to a given value. I have set the background color to
17481 # black. The user can change this setup by altering the last section of the
17482 # 'setf' definition. The escape sequence to set color attributes is
17483 # ESC d y <foreground_color> <background_color> 1
17484 # In addition, the background color can be changed through the desk accessories.
17485 # The capability 'op' sets colors to green on black (default combination).
17487 # NOTE: The NCR Unix System Administrator's Shell will not function properly
17488 # if the 'pairs' capability is defined. Un-Comment the 'pairs'
17489 # capability and recompile if you wish to have it included.
17491 ncr260wy325pp|NCR 2900_260 wyse 325,
17492 am, bw, hs, km, mc5i, mir, msgr, xon,
17493 colors#16, cols#80, lines#24, ncv#33, nlab#32,
17494 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17495 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r,
17496 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17497 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
17498 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
17499 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<5>, ht=^I,
17500 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
17501 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17503 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
17504 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
17505 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
17506 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
17507 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
17508 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
17509 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
17510 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
17511 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
17512 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
17513 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
17514 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
17515 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
17516 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17517 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17520 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
17521 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
17522 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
17523 %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
17524 %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
17525 %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
17526 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
17527 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
17529 ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
17531 cup=\Ea%i%p1%dR%p2%dC$<30>,
17532 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17534 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17537 # This definition for Wyse 350 supports several attributes. This means
17538 # that it has magic cookies (extra spaces where the attributes begin).
17539 # Some applications do not function well with magic cookies. The System
17540 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17541 # If supporting various attributes is not vital, 'xmc#1' and the extra
17542 # attributes can be removed.
17543 # Mapping to ASCII character set ('acsc' capability) can also be
17544 # restored if needed.
17545 # In addition, color capabilities have been added to this file. The drawback,
17546 # however, is that the background color has to be black. The foreground colors
17547 # are numbered 0 through 15.
17549 # NOTE: The NCR Unix System Administrator's Shell does not function properly
17550 # with the 'pairs' capability defined as below. If you wish to
17551 # have it included, Un-comment it and recompile (using 'tic').
17553 ncr260wy350pp|NCR 2900_260 wyse 350,
17554 am, bw, hs, km, mc5i, mir, msgr, xon,
17555 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
17556 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17557 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
17558 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17559 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
17560 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
17561 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<10>, ht=^I,
17562 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
17563 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17565 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
17566 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
17567 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
17568 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
17569 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
17570 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
17571 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
17572 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
17573 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
17574 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
17575 mc0=\EP$<10>, mc4=^T, mc5=^R,
17576 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
17577 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
17578 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17579 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
17582 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
17583 %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
17584 %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
17585 %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
17586 %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
17587 %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
17588 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
17589 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
17591 ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
17593 cup=\Ea%i%p1%dR%p2%dC$<30>,
17594 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17596 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
17599 # This definition for Wyse 50+ supports several attributes. This means
17600 # that it has magic cookies (extra spaces where the attributes begin).
17601 # Some applications do not function well with magic cookies. The System
17602 # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
17603 # If supporting various attributes is not vital, 'xmc#1' and the extra
17604 # attributes can be removed.
17605 # Mapping to ASCII character set ('acsc' capability) can also be
17606 # restored if needed.
17607 # (ncr260wy50+pp: originally contained commented-out
17608 # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
17609 ncr260wy50+pp|NCR 2900_260 wyse 50+,
17610 am, bw, hs, km, mc5i, mir, msgr, xon,
17611 cols#80, lines#24, nlab#32, xmc#1,
17612 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
17613 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
17614 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17615 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
17616 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
17617 ed=\EY$<5>, el=\ET$<5>, fsl=\r, home=\036$<10>,
17618 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
17620 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17621 \Ee4\Ex@\E`9\Ee7$<100>,
17622 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
17623 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
17624 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
17625 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
17626 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
17627 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
17628 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
17629 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
17630 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
17631 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
17632 mc0=\EP$<10>, mc4=^T, mc5=^R,
17633 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
17634 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
17635 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17636 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17637 \Ee4\Ex@\E`9\Ee7$<100>,
17638 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
17639 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
17640 ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
17642 cup=\Ea%i%p1%dR%p2%dC$<30>,
17643 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17644 \Ee4\Ex@\E`9\Ee7$<200>,
17645 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17646 \Ee4\Ex@\E`9\Ee7$<200>,
17648 ncr260wy60pp|NCR 2900_260 wyse 60,
17649 am, bw, hs, km, mc5i, mir, msgr, xon,
17650 cols#80, lines#24, nlab#32,
17651 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
17652 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
17653 cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
17654 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
17655 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
17656 ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<25>,
17657 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
17659 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17660 \Ee4\Ex@\E`9\Ee7$<100>,
17661 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
17662 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
17663 kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
17664 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
17665 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
17666 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
17667 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
17668 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
17669 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
17670 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
17671 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
17672 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
17673 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
17674 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
17675 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
17676 \Ee4\Ex@\E`9\Ee7$<100>,
17677 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
17678 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
17680 ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
17682 cup=\Ea%i%p1%dR%p2%dC$<30>,
17683 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17684 \Ee4\Ex@\E`9\Ee7$<100>,
17685 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
17686 \Ee4\Ex@\E`9\Ee7$<100>,
17688 ncr160vppp|NCR 2900_160 viewpoint,
17690 ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
17692 ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
17694 ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
17696 ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
17697 use=ncr260vt100wan,
17698 ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
17699 use=ncr260vt100wpp,
17700 ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
17702 ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
17704 ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
17705 use=ncr260vt200wan,
17706 ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
17707 use=ncr260vt200wpp,
17708 ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
17710 ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
17712 ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
17713 use=ncr260vt300wan,
17714 ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
17715 use=ncr260vt300wpp,
17716 ncr160wy50+pp|NCR 2900_160 wyse 50+,
17718 ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
17719 use=ncr260wy50+wpp,
17720 ncr160wy60pp|NCR 2900_160 wyse 60,
17722 ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
17724 ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
17725 am, hs, mc5i, mir, msgr, xon,
17726 cols#80, it#8, lines#24, nlab#32,
17727 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
17728 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
17729 clear=\E[2J\E[1;1H$<300>, cr=\r,
17730 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
17731 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
17732 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
17733 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
17734 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
17735 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
17736 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
17737 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
17738 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
17740 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
17741 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
17742 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\r, kf1=\EOP,
17743 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
17744 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
17745 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
17746 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
17747 B\E)0\E%/0n\E[P\031$<200>,
17749 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
17750 %;m%?%p9%t\016%e\017%;$<100>,
17751 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
17752 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
17754 ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
17756 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
17757 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
17758 \E)0\E%/0n\E[P\031$<200>,
17761 # Vendor-supplied NCR termcaps end here
17763 # NCR7900 DIP switches:
17767 # 5 - Parity (Odd/Even)
17768 # 6 - Don't Send or Do Send Spaces
17769 # 7 - Parity Enable
17770 # 8 - Stop Bits (One/Two)
17773 # 1 - Upper/Lower Shift
17774 # 2 - Typewriter Shift
17775 # 3 - Half Duplex / Full Duplex
17776 # 4 - Light/Dark Background
17777 # 5-6 - Carriage Return Without / With Line Feed
17778 # 7 - Extended Mode
17779 # 8 - Suppress Keyboard Display
17782 # 1 - End of line entry disabled/enabled
17783 # 2 - Conversational mode / (Local?) Mode
17784 # 3 - Control characters displayed / not displayed
17785 # 4 - (2-wire?) / 4-wire communications
17786 # 5 - RTS on and off for each character
17787 # 6 - (50Hz?) / 60 Hz
17788 # 7 - Exit after level zero diagnostics
17789 # 8 - RS-232 interface
17792 # 1 - Reverse Channel (yes / no)
17793 # 2 - Manual answer (no / yes)
17794 # 3-4 - Cursor appearance
17795 # 5 - Communication Rate
17796 # 6 - Enable / Disable EXT turnoff
17797 # 7 - Enable / Disable CR turnoff
17798 # 8 - Enable / Disable backspace
17800 # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
17801 # reverse, blink, dim, and underline) the appropriate number of bits (by
17802 # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
17803 # '@' is (effectively) "or"ed with each attribute to generate the proper third
17804 # character in the <ESC>0 sequence. The <sgr> string implements the following
17807 # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
17808 # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
17810 # Where: P1 <==> Standout attribute parameter
17811 # P2 <==> Underline attribute parameter
17812 # P3 <==> Reverse attribute parameter
17813 # P4 <==> Blink attribute parameter
17814 # P5 <==> Dim attribute parameter
17815 # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
17816 ncr7900i|ncr7900|ncr 7900 model 1,
17818 cols#80, lines#24, xmc#1,
17819 bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
17820 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n,
17821 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F,
17822 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
17824 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
17826 sgr0=\E0@, smso=\E0Q, smul=\E0`,
17827 ncr7900iv|ncr 7900 model 4,
17830 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
17831 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
17832 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H,
17833 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
17834 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
17835 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n,
17836 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
17837 # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
17838 # The user can enter a CTRL-B to get out of this locked state.
17839 # In <hpa>, we want to output the character given by the formula:
17840 # ((col / 10) * 16) + (col % 10) where "col" is "p1"
17841 ncr7901|ncr 7901 model,
17844 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
17845 cub1=^H, cud1=\n, cuf1=^F,
17846 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
17848 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n,
17849 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
17850 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
17851 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
17853 sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
17854 vpa=\013%p1%{64}%+%c,
17856 # Newbury Data Recording Limited (Newbury Data)
17858 # Have been manufacturing and reselling various peripherals for a long time
17859 # They don't make terminals anymore, but are still in business (in 2007).
17860 # Their e-mail address is at ndsales@newburydata.co.uk
17861 # and their post address is:
17863 # Newbury Data Recording Ltd,
17864 # Premier Park, Road One,
17865 # Winsford, Cheshire, CW7 3PT
17867 # Their technical support is still good, they sent me for free a printed copy
17868 # of the 9500 user manual and I got it just 1 week after I first contacted them
17872 # Manufactured in the early/mid eighties, behaves almost the same as a
17873 # Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
17874 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
17875 # switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
17876 # 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
17877 # recognized: if you type in "ESC !", the next (third) character is not
17878 # echoed, showing that the terminal was actually waiting for a parameter!
17879 ndr9500|nd9500|Newbury Data 9500,
17880 am, bw, hs, mc5i, mir, msgr, ul, xon,
17881 cols#80, lines#24, wsl#79,
17882 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
17883 clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
17884 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
17885 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
17886 flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
17887 ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO,
17888 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
17889 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
17890 ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
17891 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
17892 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
17893 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
17894 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
17895 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
17896 pfloc=\E|%{48}%p1%+%c2%p2\031,
17897 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
17898 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
17899 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
17900 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
17901 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
17903 ndr9500-nl|NDR 9500 with no status line,
17906 dsl@, fsl@, tsl@, use=ndr9500,
17908 ndr9500-25|NDR 9500 with 25th line enabled,
17909 lines#25, use=ndr9500,
17911 ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
17912 lines#25, use=ndr9500-nl,
17914 ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
17917 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
17918 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
17919 %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
17920 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
17922 ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
17923 lines#25, use=ndr9500-mc,
17925 ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
17928 dsl@, fsl@, tsl@, use=ndr9500-mc,
17930 ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
17931 lines#25, use=ndr9500-mc-nl,
17933 #### Perkin-Elmer (Owl)
17935 # These are official terminfo entries from within Perkin-Elmer.
17938 bantam|pe550|pe6100|perkin elmer 550,
17941 bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
17942 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17943 el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
17944 fox|pe1100|perkin elmer 1100,
17947 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
17948 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17949 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
17950 home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
17951 owl|pe1200|perkin elmer 1200,
17954 bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
17955 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17956 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
17957 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
17958 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
17959 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
17960 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
17961 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
17962 pe1251|pe6300|pe6312|perkin elmer 1251,
17964 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
17965 bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
17966 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
17967 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n,
17968 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
17969 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
17970 # (pe7000m: this had
17971 # rmul=\E!\0, smul=\E!\040,
17972 # which is probably wrong, it collides with kf0
17973 pe7000m|perkin elmer 7000 series monochrome monitor,
17976 bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
17977 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
17978 ed=\EJ, el=\EI, home=\EH, ind=\n,
17979 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
17980 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
17981 kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
17982 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
17984 pe7000c|perkin elmer 7000 series colour monitor,
17985 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
17986 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
17990 # Sperry Univac has merged with Burroughs to form Unisys.
17993 # This entry is for the Sperry UTS30 terminal running the TTY
17994 # utility under control of CP/M Plus 1R1. The functionality
17995 # provided is comparable to the DEC vt100.
17996 # (uts30: I added <rmam>/<smam> based on the init string -- esr)
17997 uts30|sperry uts30 with cp/m@1R1,
17999 cols#80, lines#24, wsl#40,
18000 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18001 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
18002 cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
18003 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
18004 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18005 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
18006 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r, home=\E[H,
18007 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
18008 ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
18009 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
18010 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
18011 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
18012 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
18013 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
18014 smul=\E[4m, tsl=\E], uc=\EPB,
18018 # Tandem builds these things for use with its line of fault-tolerant
18019 # transaction-processing computers. They aren't generally available
18020 # on the merchant market, and so are fairly uncommon.
18023 tandem6510|adm3a repackaged by Tandem,
18026 # A funny series of terminal that TANDEM uses. The actual model numbers
18027 # have a fourth digit after 653 that designates minor variants. These are
18028 # natively block-mode and rather ugly, but they have a character mode which
18029 # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
18030 # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
18031 # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
18032 tandem653|t653x|Tandem 653x multipage terminal,
18033 OTbs, am, da, db, hs,
18034 cols#80, lines#24, wsl#64, xmc#1,
18035 clear=\EI, cub1=^H, cud1=\n, cuf1=\EC,
18036 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
18037 ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
18038 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
18040 #### Tandy/Radio Shack
18042 # Tandy has a line of VDTs distinct from its microcomputers.
18045 dmterm|deskmate terminal,
18048 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H,
18049 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18050 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
18051 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
18052 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
18053 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
18054 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
18055 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
18057 dt100|dt-100|Tandy DT-100 terminal,
18059 cols#80, lines#24, xmc#1,
18060 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18061 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
18062 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18063 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
18064 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
18065 il1=\E[L, ind=\n, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
18066 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
18067 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
18068 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
18069 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
18070 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
18071 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
18072 dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
18073 cols#132, use=dt100,
18074 dt110|Tandy DT-110 emulating ansi,
18077 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
18078 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
18079 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
18080 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
18081 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
18082 ht=^I, ich1=\E[0@, il1=\E[0L, ind=\n, is2=\E[?3l\E)0\E(B,
18083 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
18084 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
18085 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
18086 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
18087 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
18088 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
18089 smacs=^N, smso=\E[7m, smul=\E[4m,
18090 pt210|TRS-80 PT-210 printing terminal,
18093 bel=^G, cr=\r, cud1=\n, ind=\n,
18095 #### Tektronix (tek)
18097 # Tektronix tubes are graphics terminals. Most of them use modified
18098 # oscilloscope technology incorporating a long-persistence green phosphor,
18099 # and support vector graphics on a main screen with an attached "dialogue
18100 # area" for interactive text.
18103 tek|tek4012|tektronix 4012,
18106 bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
18107 ff=\014$<1000>, is2=\E^O,
18108 # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18109 tek4013|tektronix 4013,
18110 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
18111 tek4014|tektronix 4014,
18113 is2=\E\017\E9, use=tek4012,
18114 # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18115 tek4015|tektronix 4015,
18116 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
18117 tek4014-sm|tektronix 4014 in small font,
18118 cols#121, lines#58,
18119 is2=\E\017\E\:, use=tek4014,
18120 # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
18121 tek4015-sm|tektronix 4015 in small font,
18122 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
18123 # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
18125 # You need to have "stty nl2" in effect. Some versions of tset(1) know
18126 # how to set it for you.
18128 # It's got the Magic Cookie problem around stand-out mode. If you can't
18129 # live with Magic Cookie, remove the :so: and :se: fields and do without
18130 # reverse video. If you like reverse video stand-out mode but don't want
18131 # it to flash, change the letter 'H' to 'P' in the :so: field.
18132 tek4023|tektronix 4023,
18134 OTdN#4, cols#80, lines#24, vt#4, xmc#1,
18135 OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
18136 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
18137 rmso=^_@, smso=^_P,
18138 # It is recommended that you run the 4025 at 4800 baud or less;
18139 # various bugs in the terminal appear at 9600. It wedges at the
18140 # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
18141 # on keyboard don't work. You have to hit BREAK twice to get
18142 # one break at any speed - this is a documented feature.
18143 # Can't use cursor motion because it's memory relative, and
18144 # because it only works in the workspace, not the monitor.
18145 # Same for home. Likewise, standout only works in the workspace.
18147 # <el> was commented out since vi and rogue seem to work better
18148 # simulating it with lots of spaces!
18150 # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
18151 # and didn't seem necessary.
18153 tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
18155 cols#80, it#8, lines#34, lm#0,
18156 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
18157 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
18158 cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
18159 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
18160 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
18161 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
18162 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
18164 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18165 rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
18167 smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
18168 \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
18169 tek4025-17|tek 4025 17 line window,
18170 lines#17, use=tek4025,
18171 tek4025-17-ws|tek 4025 17 line window in workspace,
18172 is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
18173 \r\037wor\s17\r\037mon\s17\r,
18174 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
18175 smso=\037att e\r, use=tek4025-17,
18176 tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
18177 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
18178 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18180 # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
18181 # The following status modes are assumed for normal operation (replace the
18182 # initial "!" by whatever the current command character is):
18183 # !COM 29 # NOTE: changes command character to GS (^])
18189 # ^]STO 9 17 25 33 41 49 57 65 73
18190 # Other modes may be set according to communication requirements.
18191 # If the command character is inadvertently changed, termcap can't restore it.
18192 # Insert-character cannot be made to work on both top and bottom rows.
18193 # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
18194 # There also seems to be a problem with vertical motion, perhaps involving
18195 # delete/insert-line, following a typed carriage return. This terminal sucks.
18196 # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18197 # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
18198 # work any more. -- esr)
18199 tek4025a|Tektronix 4025A,
18200 OTbs, OTpt, am, bw, da, db, xon,
18201 cols#80, it#8, lines#34,
18202 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
18203 cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
18204 cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;,
18205 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
18206 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
18207 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
18208 il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;,
18209 rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
18210 \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
18211 \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
18212 \s33\s41\s49\s57\s65\s73\035wor\s0;,
18214 # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
18215 # Here's the command file that I use to get rogue to work on the 4025.
18216 # It should work with any program using the old curses (e.g. it better
18217 # not try to scroll, or cursor addressing won't work. Also, you can't
18219 # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
18220 tek4025-cr|tek 4025 for curses and rogue,
18222 cols#80, it#8, lines#33,
18223 clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
18224 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n,
18225 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
18226 rmcup=\037wor 0, smcup=\037wor 33h,
18227 # next two lines commented out since curses only allows 128 chars, sigh.
18228 # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
18229 # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
18230 tek4025ex|4025ex|4027ex|tek 4025 w/!,
18231 is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
18233 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
18234 tek4105|tektronix 4105,
18235 OTbs, am, mir, msgr, ul, xenl, xt,
18236 cols#79, it#8, lines#29,
18237 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
18238 clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
18239 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
18240 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
18241 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
18242 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
18243 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
18244 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
18245 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
18246 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
18247 smul=\E[=5;<2m, tbc=\E[1g,
18249 # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
18250 tek4105-30|4015 emulating 30 line vt100,
18251 am, mir, msgr, xenl, xon,
18252 cols#80, it#8, lines#30, vt#3,
18253 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18254 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
18255 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18256 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18257 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
18258 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
18259 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
18260 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
18261 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
18262 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
18263 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
18264 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
18265 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
18266 %;m%?%p9%t\016%e\017%;$<2>,
18267 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
18268 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
18271 # Tektronix 4105 from BRL
18272 # The following setup modes are assumed for normal operation:
18273 # CODE ansi CRLF no DABUFFER 141
18274 # DAENABLE yes DALINES 30 DAMODE replace
18275 # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
18276 # FLAGGING input INSERTREPLACE replace LFCR no
18277 # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
18278 # SELECTCHARSET G1 0 TABS -2
18279 # Other setup modes may be set for operator convenience or communication
18280 # requirements; I recommend
18281 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
18282 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
18283 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
18284 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
18285 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
18286 # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
18288 # and factory color maps. After setting these modes, save them with NVSAVE. No
18289 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18290 # "IC" cannot be used in combination with "im" & "ei".
18291 # "tek4105a" is just a guess:
18292 tek4105a|Tektronix 4105,
18293 OTbs, OTpt, msgr, xon,
18294 OTkn#8, cols#80, it#8, lines#30, vt#3,
18295 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
18296 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
18297 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18298 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18299 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18300 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
18301 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18302 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
18303 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, is2=\E%!1,
18304 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18305 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
18306 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
18307 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
18308 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
18309 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18310 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
18311 \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
18312 \E[?7;8h\E[r\E[m\E>,
18313 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
18314 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18317 # Tektronix 4106/4107/4109 from BRL
18318 # The following setup modes are assumed for normal operation:
18319 # CODE ansi COLUMNMODE 80 CRLF no
18320 # DABUFFER 141 DAENABLE yes DALINES 32
18321 # DAMODE replace DAVISIBILITY yes ECHO no
18322 # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
18323 # LFCR no LOCKKEYBOARD no ORIGINMODE relative
18324 # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
18326 # Other setup modes may be set for operator convenience or communication
18327 # requirements; I recommend
18328 # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
18329 # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
18330 # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
18331 # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
18332 # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
18333 # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
18335 # and factory color maps. After setting these modes, save them with NVSAVE. No
18336 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
18337 # "IC" cannot be used in combination with "im" & "ei".
18338 tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
18340 cols#80, it#8, lines#32, vt#3,
18341 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
18342 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
18343 cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
18344 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18345 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18346 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
18347 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
18348 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
18349 il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dS, is2=\E%!1,
18350 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
18351 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
18352 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
18353 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
18354 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
18355 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18356 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
18357 \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
18358 ;5l\E[?7;8h\E[r\E[m\E>,
18359 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
18360 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
18362 # Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
18363 # 0 selects Tek mode, i.e., \E%!0
18364 # 1 selects ANSI mode
18365 # 2 selects ANSI edit-mode
18366 # 3 selects VT52 mode
18368 # One odd thing about the description (which has been unchanged since the 90s)
18369 # is that the cursor addressing is using VT52 mode, and a few others use the
18370 # VT52's non-CSI versions of ANSI, e.g., \EJ.
18371 tek4107|tek4109|tektronix terminals 4107 4109,
18372 OTbs, am, mir, msgr, ul, xenl, xt,
18373 cols#79, it#8, lines#29,
18374 bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
18375 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r,
18376 cub1=^H, cud1=\n, cuf1=\EC,
18377 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
18378 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n,
18379 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18380 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
18381 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
18382 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
18383 %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
18384 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
18385 smul=\E%!1\E[4m$<2>\E%!0,
18386 # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
18387 # see the note attached to tek4207.
18388 tek4207-s|Tektronix 4207 with sysline but no memory,
18390 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
18391 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
18392 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
18393 is2=\E7\E[?6l\E[2K\E[?6h\E8,
18394 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
18396 # The 4110 series may be a wonderful graphics series, but they make the 4025
18397 # look good for screen editing. In the dialog area, you can't move the cursor
18398 # off the bottom line. Out of the dialog area, ^K moves it up, but there
18399 # is no way to scroll.
18401 # Note that there is a floppy for free from Tek that makes the
18402 # 4112 emulate the vt52 (use the vt52 termcap). There is also
18403 # an expected enhancement that will use ANSI standard sequences.
18405 # 4112 in non-dialog area pretending to scroll. It really wraps
18406 # but vi is said to work (more or less) in this mode.
18408 # 'vi' works reasonably well with this entry.
18410 otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
18413 bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
18414 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
18415 # The 4112 with the ANSI compatibility enhancement
18416 tek4112|tek4114|tektronix 4110 series,
18419 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
18420 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
18421 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
18422 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
18423 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
18424 tek4112-nd|4112 not in dialog area,
18426 cuu1=^K, use=tek4112,
18427 tek4112-5|4112 in 5 line dialog area,
18428 lines#5, use=tek4112,
18429 # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
18430 # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
18431 # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
18432 # previously \0410 and \0411 sequences...I don't *think* they were supposed
18433 # to be 4-digit octal -- esr)
18434 tek4113|tektronix 4113 color graphics with 5 line dialog area,
18437 clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
18438 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
18440 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
18441 tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
18443 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
18444 # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
18445 # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
18446 # :vb: needs enough delay to let you see the background color being toggled.
18447 tek4113-nd|tektronix 4113 color graphics with no dialog area,
18449 cols#80, it#8, lines#34,
18450 clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
18452 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
18454 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
18455 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
18456 # This entry is from Tek. Inc. (Brian Biehl)
18457 # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
18458 otek4115|Tektronix 4115,
18459 OTbs, am, da, db, eo,
18460 cols#80, it#8, lines#34,
18461 cbt=\E[Z, clear=\E[H\E[2J,
18462 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
18463 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
18464 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
18465 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
18467 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
18468 \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
18469 kbs=^H, ri=\EM, rmam=\E[?7l,
18470 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
18471 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
18472 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
18474 tek4115|newer tektronix 4115 entry with more ANSI capabilities,
18477 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
18478 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
18479 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18480 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
18481 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
18482 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
18483 il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D,
18484 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
18485 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
18486 rmso=\E[m, rmul=\E[m,
18487 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
18489 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
18490 vpa=\E[%p1%{1}%+%dd,
18491 # The tek4125 emulates a vt100 incorrectly - the scrolling region
18492 # command is ignored. The following entry replaces <csr> with the needed
18493 # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
18494 # chokes on; and adds a lot of initialization for the tek dialog area.
18495 # Note that this entry uses all 34 lines and sets the cursor color to green.
18496 # Steve Jacobson 8/85
18497 # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
18498 # commented out, <smir>=\E1 because there's no <rmir> -- esr)
18499 tek4125|tektronix 4125,
18501 csr@, dl1=\E[1M, il1=\E[1L,
18502 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
18503 \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
18505 rc@, sc@, smkx=\E=, use=vt100+4bsd,
18507 # From: <jcoker@ucbic>
18508 # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
18509 # supplied another, less capable 4107 entry. So we'll use that for 4107 and
18510 # note that if jcoker wasn't confused you may be able to use this one.
18511 # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
18512 tek4207|Tektronix 4207 graphics terminal with memory,
18513 am, bw, mir, msgr, ul, xenl,
18514 cols#80, it#8, lines#32,
18515 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
18516 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18517 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
18518 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
18519 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
18520 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
18521 C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
18522 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
18523 rev=\E[7m, ri=\E[T,
18524 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
18525 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
18526 smul=\E[4m, tbc=\E[1g,
18528 # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
18529 # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
18530 # Tab had been given as \E2I,that must be the tab-set capability -- esr)
18531 tek4404|tektronix 4404,
18533 cols#80, it#8, lines#32,
18534 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
18535 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
18536 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
18537 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
18538 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
18539 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
18540 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
18541 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
18542 smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
18543 # Some unknown person wrote:
18544 # I added the is string - straight Unix has ESC ; in the login
18545 # string which sets a ct8500 into monitor mode (aka 4025 snoopy
18546 # mode). The is string here cleans up a few things (but not
18548 ct8500|tektronix ct8500,
18551 bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
18552 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
18553 dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
18554 il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
18555 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
18557 # Tektronix 4205 terminal.
18559 # am is not defined because the wrap around occurs not when the char.
18560 # is placed in the 80'th column, but when we are attempting to type
18561 # the 81'st character on the line. (esr: hmm, this is like the vt100
18562 # version of xenl, perhaps am + xenl would work!)
18564 # Bold, dim, and standout are simulated by colors and thus not allowed
18565 # with colors. The tektronix color table is mapped into the RGB color
18566 # table by setf/setb. All colors are reset to factory specifications by oc.
18567 # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
18568 # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
18569 # interval then maps into pre-defined value.
18570 tek4205|tektronix 4205,
18572 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
18573 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
18574 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
18575 clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
18576 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
18577 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
18578 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
18579 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
18580 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
18582 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
18583 %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
18584 %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
18585 %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
18586 1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
18587 %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
18588 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}
18589 %<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%t
18590 C8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:
18592 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
18593 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
18594 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
18596 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
18598 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
18599 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
18600 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
18601 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
18603 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
18604 %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
18606 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
18607 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
18608 smul=\E[4m, tbc=\E[1g,
18610 #### Teletype (tty)
18612 # These are the hardcopy Teletypes from before AT&T bought the company,
18613 # clattering electromechanical dinosaurs in Bakelite cases that printed on
18614 # pulpy yellow roll paper. If you remember these you go back a ways.
18615 # Teletype-branded VDTs are listed in the AT&T section.
18617 # The earliest UNIXes were designed to use these clunkers; nroff and a few
18618 # other programs still default to emitting codes for the Model 37.
18621 tty33|tty35|model 33 or 35 teletype,
18624 bel=^G, cr=\r, cud1=\n, ind=\n,
18625 tty37|model 37 teletype,
18627 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
18630 # There are known to be at least three flavors of the tty40, all seem more
18631 # like IBM half duplex forms fillers than ASCII terminals. They have lots of
18632 # awful braindamage, such as printing a visible newline indicator after each
18633 # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
18634 # braindamaged but has hope and is described here. The 40-4 is a 3270
18635 # lookalike and beyond hope. The terminal has visible bell but I don't know
18636 # it - it's null here to prevent it from showing the BL character.
18637 # There is an \EG in <nl> because of a bug in old vi (if stty says you have
18638 # a "newline" style terminal (-crmode) vi figures all it needs is nl
18639 # to get crlf, even if <cr> is not ^M.)
18640 # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
18641 tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
18644 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
18645 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
18646 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
18647 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
18648 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
18649 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
18650 tty43|model 43 teletype,
18651 OTbs, am, hc, os, xon,
18653 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
18658 # You can add <is2=\E<> to put this 40-column mode, though I can't
18659 # for the life of me think why anyone would want to.
18660 scanset|sc410|sc415|Tymshare Scan Set,
18663 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H,
18664 cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
18665 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, kcub1=\ED,
18666 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
18667 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
18669 #### Volker-Craig (vc)
18671 # If you saw a Byte Magazine cover with a terminal on it during the early
18672 # 1980s, it was probably one of these. Carl Helmers liked them because
18673 # they could crank 19.2 and were cheap (that is, he liked them until he tried
18674 # to program one...)
18677 # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
18678 # every other linefeed.
18679 vc303|vc103|vc203|volker-craig 303,
18682 bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
18683 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
18684 kcuu1=^N, ll=\017$<1>W,
18685 vc303a|vc403a|volker-craig 303a,
18686 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
18687 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
18688 # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
18689 vc404|volker-craig 404,
18692 bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
18693 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
18694 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
18695 kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
18696 vc404-s|volker-craig 404 w/standout mode,
18697 cud1=\n, rmso=^O, smso=^N, use=vc404,
18698 # From: <wolfgang@cs.sfu.ca>
18699 # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
18700 vc414|vc414h|Volker-Craig 414H in sane escape mode.,
18703 clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
18704 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
18705 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
18706 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
18707 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
18708 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
18709 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
18710 rmso=\E^_, smso=\E^Y,
18711 vc415|volker-craig 415,
18712 clear=^L, use=vc404,
18714 ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
18717 #### IBM PC and clones
18720 # The pcplot IBM-PC terminal emulation program is really messed up. It is
18721 # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
18722 # doesn't support scrolling regions, ignores add line commands, and ignores
18723 # delete line commands. Consequently, the resulting behavior looks like a
18724 # crude adm3a-type terminal.
18725 # Steve Jacobson 8/85
18726 pcplot|pc-plot terminal emulation program,
18728 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
18729 # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
18730 # I've found that my KayPro II, running MDM730, continues to emulate an
18731 # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
18732 # system the following termcap entry works well:
18733 # I have noticed a couple of minor glitches, but nothing I can't work
18734 # around. (I added two capabilities from the BRL entry -- esr)
18735 kaypro|kaypro2|kaypro II,
18738 bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L,
18739 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
18740 el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K,
18742 # From IBM, Thu May 5 19:35:27 1983
18743 # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
18744 ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
18747 bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\,
18748 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
18750 ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
18751 OTbs, am, bw, eo, hs, km, msgr, ul,
18752 cols#80, it#8, lines#24,
18753 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
18755 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
18756 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
18757 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
18758 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
18759 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
18760 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
18761 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
18762 kdch1=^?, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242,
18763 kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250,
18764 khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H,
18765 nel=\r, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
18766 rmso=\E[m, rmul=\E[m,
18767 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
18769 sgr0=\E[m, smso=\E[7m, smul=\E[4m,
18773 # Apple II firmware console first, then various 80-column cards and
18774 # terminal emulators. For two cents I'd toss all these in the UFO file
18775 # along with the 40-column apple entries.
18778 # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
18779 # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
18780 # function of TIC, not the firmware.
18781 # The clear key on a IIgs will do something like clear-screen,
18782 # depending on what you're in.
18783 appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
18784 OTbs, am, bw, eo, msgr,
18785 cols#80, it#8, lines#24,
18786 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
18787 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18788 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n,
18789 kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N,
18791 # Apple //e with 80-column card, entry from BRL
18792 # The modem interface is permitted to discard LF (maybe DC1), otherwise
18793 # passing characters to the 80-column firmware via COUT (PR#3 assumed).
18794 # Auto-wrap does not work right due to newline scrolling delay, which also
18795 # requires that you set "stty cr2".
18796 # Note: Cursor addressing is only available via the Pascal V1.1 entry,
18797 # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
18798 # using a terminal emulation program instead of the built-in firmware.
18802 bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_,
18803 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
18804 is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K,
18805 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
18807 # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
18808 # 4.20, with incoming and outgoing terminals both on 0, emulation On.
18809 apple2e-p|Apple //e via Pascal,
18810 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
18811 kcud1=\n, use=apple2e,
18812 # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
18813 # Enable DC3/DC1 flow control with "stty ixon -ixany".
18814 apple-ae|ASCII Express,
18815 OTbs, am, bw, msgr, nxon, xon,
18816 cols#80, it#8, lines#24,
18817 bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
18818 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18819 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
18820 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
18822 appleII|apple ii plus,
18824 cols#80, it#8, lines#24,
18825 clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
18826 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
18827 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
18828 is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
18829 # Originally by Gary Ford 21NOV83
18830 # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
18831 apple-80|apple II with smarterm 80 col,
18834 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
18835 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
18836 ed=\013$<10*/>, el=\035$<10/>, home=^Y,
18837 apple-soroc|apple emulating soroc 120,
18840 bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
18841 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
18842 home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
18843 # From Peter Harrison, Computer Graphics Lab, San Francisco
18844 # ucbvax!ucsfmis!harrison .....uucp
18845 # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
18846 # "These two work. If you don't have the inverse video chip for the
18847 # Apple with videx then remove the :so: and :se: fields."
18848 # (apple-videx: this used to be called DaleApple -- esr)
18849 apple-videx|Apple with videx videoterm 80 column board with inverse video,
18851 cols#80, it#8, lines#24,
18852 clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\,
18853 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18854 home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y,
18855 rmso=^Z2, sgr0=^Z2, smso=^Z3,
18856 # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
18857 # Apple Cat ][ 212 modem, + more all
18858 # controlled by ASCII Express: Pro.
18859 # From Dave Shaver <isucs1!shaver>
18860 apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
18863 acsc=, clear=^L, cuf1=^\,
18864 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18865 flash=^W35^W06, home=^Y,
18866 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
18868 apple-uterm|Ultraterm for Apple micros,
18871 acsc=, clear=^L, cuf1=^\,
18872 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18873 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
18874 # from trwrba!bwong (Bradley W. Wong):
18876 # This entry assumes that you are using an apple with the UCSD Pascal
18877 # language card. SYSTEM.MISCINFO is assumed to be the same as that
18878 # supplied with the standard apple except that screenwidth should be set
18879 # using SETUP to 80 columns. Note that the right arrow is not mapped in
18880 # this termcap entry. This is because that key, on the Apple, transmits
18881 # a ^U and would thus preempt the more useful "up" function of vi.
18884 apple80p|80-column apple with Pascal card,
18887 clear=^Y^L, cuf1=^\\:,
18888 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
18891 # Apple II+ equipped with Videx 80 column card
18893 # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
18894 # manually converted by D A Gwyn
18896 # DO NOT use any terminal emulation with this data base, it works directly
18897 # with the Videx card. This has been tested with vi 1200 baud and works fine.
18899 # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
18900 # 1 screen, while in R2 ^U doesn't.
18901 # For inverse alternate character set add:
18902 # <smacs>=^O:<rmacs>=^N:
18903 # (apple-v: added it#8 -- esr)
18904 apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
18906 cols#80, it#8, lines#24,
18907 bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H,
18908 cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
18909 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
18910 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
18911 khome=^Y, rmso=^Z2, smso=^Z3,
18912 apple-videx3|vapple|Apple II with 80 col card,
18915 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
18916 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
18917 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
18918 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
18919 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
18920 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
18921 aepro|Apple II+ running ASCII Express Pro--vt52,
18924 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
18925 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
18927 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
18928 apple-vm80|ap-vm80|apple with viewmax-80,
18931 clear=\014$<300/>, cuf1=^\\:,
18932 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
18933 ed=\013$<300/>, el=^], home=\031$<200/>,
18935 #### Apple Lisa & Macintosh
18938 # (lisa: changed <cvvis> to <cnorm> -- esr)
18939 lisa|apple lisa console display (black on white),
18940 OTbs, am, eo, msgr,
18941 cols#88, it#8, lines#32,
18942 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
18943 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
18944 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
18945 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
18946 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
18947 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
18948 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
18949 liswb|apple lisa console display (white on black),
18950 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
18951 smso=\E[m, smul=\E[4m, use=lisa,
18953 # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
18954 # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
18956 # These entries assume that the 'Auto Wraparound' is enabled.
18957 # Xon-Xoff flow control should also be enabled.
18959 # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
18960 # settings are in non-volatile memory and don't need to be reset upon login.
18961 # Also setting the number of columns glitches the screen annoyingly.
18962 # You can type "reset" to get them set.
18964 lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
18965 OTbs, OTpt, am, xenl, xon,
18966 OTkn#4, cols#80, it#8, lines#24, vt#3,
18967 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
18968 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
18969 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
18970 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
18971 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD,
18972 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
18973 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
18974 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
18975 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
18976 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
18978 # Lisaterm in 132 column ("wide") mode.
18979 lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
18981 kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm,
18982 # Although MacTerminal has insert/delete line, it is commented out here
18983 # since it is much faster and cleaner to use the "lock scrolling region"
18984 # method of inserting and deleting lines due to the MacTerminal implementation.
18985 # Also, the "Insert/delete ch" strings have an extra character appended to them
18986 # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
18987 # supported by MacTerminal.
18988 mac|macintosh|Macintosh with MacTerminal,
18991 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
18992 # Lisaterm in 132 column ("wide") mode.
18993 mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
18996 #### Radio Shack/Tandy
18999 # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
19000 # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
19001 # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
19002 coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
19004 cols#80, it#8, lines#24,
19005 bel=^G, blink=^_", bold=\E\:\001, civis=^E\s,
19006 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F,
19007 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
19008 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n,
19009 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
19010 sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
19011 # (trs2: removed obsolete ":nl=^_:" -- esr)
19012 trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
19014 cols#80, it#8, lines#24,
19015 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^],
19016 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
19017 el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\,
19018 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
19019 # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
19020 # (This had extension capabilities
19021 # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
19022 # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
19023 # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
19024 trs16|trs-80 model 16 console,
19026 cols#80, it#8, lines#24,
19027 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
19028 cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
19029 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
19030 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
19031 ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
19032 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
19033 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
19034 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
19035 smacs=\ERG, smso=\ERD,
19037 #### Commodore Business Machines
19039 # Formerly located in West Chester, PA; went spectacularly bust in 1994
19040 # after years of shaky engineering and egregious mismanagement. Made one
19041 # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
19042 # C-128, VIC-20). The C-64 is said to have been the most popular machine
19043 # ever (most units sold); they can still be found gathering dust in closets
19047 # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
19048 # Added a few more entries, converted caret-type control sequence (^x) entries
19049 # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
19050 # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
19052 # :as:, :ae: Support for alternate character sets.
19053 # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
19054 # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
19055 # This one appears to fix a problem I always had with a line ending
19056 # at 'width+1' (I think) followed by a blank line in vi. The blank
19057 # line tended to disappear and reappear depending on how the screen
19058 # was refreshed. Note that this is probably needed only if you use
19059 # something like a Dnet Fterm with the window sized to some peculiar
19060 # dimension larger than 80 columns.
19061 # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
19062 # (amiga: removed obsolete :kn#10:,
19063 # also added empty <acsc> to suppress a warning --esr)
19065 OTbs, am, bw, xenl,
19067 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
19068 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
19069 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
19070 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
19071 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19072 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
19073 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
19074 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
19075 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
19076 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
19077 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
19078 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
19079 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
19081 # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
19082 # (amiga: added empty <acsc> to suppress a warning.
19083 # I'm told this entry screws up badly with AS225, the Amiga
19084 # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
19085 amiga-h|Hans Verkuil's Amiga ANSI,
19088 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
19089 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r,
19090 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
19091 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
19092 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
19093 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
19094 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
19095 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
19096 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
19097 kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
19098 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
19099 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
19100 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
19101 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
19102 smso=\2337m, smul=\2334m,
19104 # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
19106 # Pavel Fedin added
19111 amiga-8bit|Amiga ANSI using 8-bit controls,
19112 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19113 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
19114 kpp=\233T, ri=\215, rin@, use=amiga-h,
19116 # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
19117 # requires use of appropriate preferences settings.
19118 amiga-vnc|Amiga using VNC console (black on light gray),
19119 am, da, db, msgr, ndscr,
19120 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#0x100,
19121 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
19122 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=\r,
19123 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
19124 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
19125 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
19126 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
19127 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
19128 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
19129 indn=\E[%p1%dS, invis=\E8m,
19130 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19131 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
19132 kcuu1=\E[A, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
19133 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
19134 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
19135 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
19136 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
19137 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
19138 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
19139 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
19140 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
19141 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
19142 smso=\E[1m, smul=\E[4m,
19144 # MorphOS on Genesi Pegasos
19145 # By Pavel Fedin <sonic_amiga@rambler.ru>
19147 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
19148 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
19149 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
19150 ri=\215, rin@, use=amiga-h,
19152 # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
19153 # I'm trying to write a termcap for a commodore b-128, and I'm
19154 # having a little trouble. I've had to map most of my control characters
19155 # to something that unix will accept (my delete-char is a ctrl-t, etc),
19156 # and create some functions (like cm), but thats life.
19157 # The problem is with the arrow keys - right, and up work fine, but
19158 # left deletes the previous character and down I just can't figure out.
19159 # Jove knows what I want, but I don't know what it's sending to me (it
19160 # isn't thats bound to next-line in jove).
19161 # Anybody got any ideas? Here's my termcap.
19162 # DAG -- I changed his "^n" entries to "\n"; see if that works.
19164 commodore|b-128|Commodore B-128 micro,
19166 OTdN#20, cols#80, lines#24, pb#150,
19167 OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n,
19168 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
19169 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
19170 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
19171 kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
19176 # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
19177 northstar|North Star Advantage,
19181 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
19182 el=\016$<200/>, home=\034\032$<200/>,
19186 # Thu Jul 7 03:55:16 1983
19188 # As an aside, be careful; it may sound like an anomaly on the
19189 # Osborne, but with the 80-column upgrade, it's too easy to
19190 # enter lines >80 columns!
19192 # I've already had several comments...
19193 # The Osborne-1 with the 80-col option is capable of being
19194 # 52, 80, or 104 characters wide; default to 80 for compatibility
19195 # with most systems.
19197 # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
19198 osborne-w|osborne1-w|osborne I in 104-column mode,
19200 cols#104, lines#24,
19201 bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19202 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19203 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
19204 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
19205 # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
19206 osborne|osborne1|osborne I in 80-column mode,
19207 OTbs, am, mir, msgr, ul, xhp,
19208 OTdB#4, cols#80, lines#24,
19209 clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
19210 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
19211 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
19212 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
19213 rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
19215 # Osborne Executive definition from BRL
19216 # Similar to tvi920
19217 # Added by David Milligan and Tom Smith (SMU)
19218 osexec|Osborne executive,
19220 OTug#1, cols#80, lines#24, xmc#1,
19221 OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19222 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
19223 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
19224 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
19225 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
19226 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
19227 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
19230 #### Console types for obsolete UNIX clones
19232 # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
19233 # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
19234 # were commercial, Minix an educational tool sold in conjunction with a book.
19235 # Memory-segmentation limits and a strong tendency to look like V7 long after
19236 # it was obsolete made all three pretty lame. Venix croaked early. Coherent
19237 # and Minix were ported to 32-bit Intel boxes, only to be run over by a
19238 # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
19239 # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
19240 # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
19241 # even as single processes under SunOS and the Macintosh OS.
19245 # https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
19246 minix|minix console (v3),
19247 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
19248 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
19249 \301w\302x\263y\363z\362{\343|\330}\234~\376,
19250 kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
19251 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
19252 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
19253 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
19254 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
19255 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
19256 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
19257 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
19258 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
19259 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
19260 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
19261 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
19262 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
19265 minix-3.0|minix console (v3.0),
19266 use=ecma+color, use=minix-1.7,
19269 # http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
19270 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
19271 minix-1.7|minix console (v1.7),
19273 cols#80, it#8, lines#25,
19274 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
19275 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19276 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19277 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19278 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
19279 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
19280 il1=\E[L, ind=\n, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
19281 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
19282 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
19283 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=\r\n,
19284 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
19285 smso=\E[7m, smul=\E[4m,
19286 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
19287 minix-old|minix-1.5|minix console (v1.5),
19289 cols#80, it#8, lines#25,
19290 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
19291 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
19292 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19293 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19294 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
19295 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
19296 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
19297 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
19298 khome=\E[H, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m,
19299 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
19300 # The linewrap option can be specified by editing /usr/include/minix/config.h
19301 # before recompiling the minix 1.5 kernel.
19302 minix-old-am|minix console with linewrap,
19305 pc-minix|minix console on an Intel box,
19306 use=klone+acs, use=minix-3.0,
19308 # According to the Coherent 2.3 manual, the PC console is similar
19309 # to a z19. The differences seem to be (1) 25 lines, (2) no status
19310 # line, (3) standout is broken, (4) ins/del line is broken, (5)
19311 # has blinking and bold.
19312 pc-coherent|pcz19|coherent|IBM PC console running Coherent,
19314 cols#80, it#8, lines#25,
19315 bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
19316 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
19317 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED,
19318 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
19319 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
19321 # According to the Venix 1.1 manual, the PC console is similar
19322 # to a DEC vt52. Differences seem to be (1) arrow keys send
19323 # different strings, (2) enhanced standout, (3) added insert/delete line.
19324 # Note in particular that it doesn't have automatic margins.
19325 # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
19326 # not described here because this derives from an old termcap entry.
19327 pc-venix|venix|IBM PC console running Venix,
19328 cols#80, it#8, lines#25,
19329 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
19330 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
19331 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK,
19332 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
19334 #### Miscellaneous microcomputer consoles
19336 # If you know anything more about any of these, please tell me.
19339 # The MAI Basic Four computer was obsolete at the end of the 1980s.
19340 # It may be used as a terminal by putting it in "line" mode as seen on
19341 # one of the status lines.
19342 # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
19343 # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
19344 # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
19345 # used \ED instead.
19346 # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
19347 mai|basic4|MAI Basic Four in ansi mode,
19348 am, da, db, mir, msgr,
19349 cols#82, it#8, lines#25,
19350 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
19351 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=^X,
19352 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
19353 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
19354 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
19355 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
19356 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
19357 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
19358 kf7=\EOV, kf8=\EOW, nel=\r\ED, rc=\E8, rev=\E[7m, ri=\E[T,
19359 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
19360 smir=\E[4h, smso=\E[7m, smul=\E[4m,
19361 # basis from Peter Harrison, Computer Graphics Lab, San Francisco
19362 # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
19364 # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
19365 # The Basis 108 was a Apple II clone, manufactured by the "Basis
19366 # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
19367 # about 1,5 km from where I live, but doesn't build own computers any
19368 # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
19369 # equipped with one or two 5.25" disk drives, had a monochrome and colour
19370 # video output for a TV set or a dedicated monitor and several slots for
19371 # Apple II cards. Basis 108 were quite popular at german schools before
19372 # the advent of the IBM PC. They run, for example, the UCSD Pascal
19373 # development system (which I used even in 1993 to program the steering
19374 # and data recording for our school's experimental solar panel :), Apple DOS
19376 # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
19377 basis|BASIS108 computer with terminal translation table active,
19378 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
19379 kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
19380 smso=\E(, use=adm3a,
19381 # luna's BMC terminal emulator
19382 luna|luna68k|LUNA68K Bitmap console,
19383 cols#88, lines#46, use=ansi-mini,
19384 megatek|pegasus workstation terminal emulator,
19387 # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
19388 # interface (pre-Macintosh by several years) that went nowhere.
19389 xerox820|x820|Xerox 820,
19392 bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
19393 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
19396 #### Videotex and teletext
19399 # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
19400 # \E[?3l 80 columns
19401 # \E[?4l scrolling on
19402 # \E[12h local echo off
19403 # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
19404 # \E)0 G1 DEC set (line graphics)
19406 # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
19407 m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
19408 OTbs, eslok, hs, xenl,
19409 cols#80, it#8, lines#24, wsl#72, xmc#0,
19410 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
19411 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
19412 cnorm=\E[<1l, cr=\r, csr=\E[%i%p1%d;%p2%dr,
19413 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
19414 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
19415 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
19416 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=\n,
19417 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, ip=$<7/>,
19418 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
19419 is3=\E[?3l, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
19420 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
19421 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
19422 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
19423 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
19424 mc0=\E[i, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
19425 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
19426 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
19427 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
19428 u6=\E[%i%d;%dR, u7=\E[6n,
19430 # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
19432 minitel1|minitel 1,
19433 am, bw, eslok, hs, hz, .msgr, G0,
19434 colors#8, cols#40, lines#24, pairs#8, .ncv#16,
19435 acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
19436 civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
19437 cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
19438 dsl=\037@A\030\n, el=^X,
19439 flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n,
19440 home=^^, ind=\n, is2=\E;`ZQ\E\:iC\E\:iE\021, kbs=^SG,
19441 kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
19442 krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
19443 rev=\E], ri=^K, rmso=\E\\,
19444 rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
19445 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
19446 \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
19448 setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
19449 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
19450 %tC%e%p1%'@'%+%c%;,
19451 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
19452 sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
19453 u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
19454 u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
19455 .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D,
19456 C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
19458 XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
19459 \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
19460 \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
19461 \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
19462 \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
19463 \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
19464 \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
19465 \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
19466 \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
19467 \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
19468 \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
19469 \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
19470 \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
19472 minitel1b|minitel 1-bistandard (in 40cols mode),
19474 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
19475 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
19476 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
19477 is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I,
19478 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
19479 kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/,
19480 kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5,
19481 kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9,
19482 kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG,
19483 kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H,
19484 kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition,
19485 lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation,
19486 rmir=\E[4l, smir=\E[4h,
19487 u8=\001%[ABCPtuvwxyz0123456789\:;<=>?]\004,
19488 .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
19489 .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E\:|k, .rmkx=\E;jYA,
19490 .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D,
19492 # rmkx posait des problemes (logout en sortant de vi).
19493 minitel1b-80|minitel 1-bistandard (standard teleinformatique),
19494 am@, bw@, eslok@, hz@, msgr, G0,
19495 colors@, cols#80, it#8, pairs@,
19496 acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
19497 clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
19498 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
19499 ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
19500 kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
19501 kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
19502 kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
19503 kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
19504 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
19505 kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
19506 op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
19508 rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
19509 H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
19510 \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
19511 M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
19513 sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
19514 smso=\E[7m, smul=\E[4m,
19515 tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
19516 %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
19517 \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
19518 \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
19520 u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
19521 .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
19522 .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
19524 .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
19526 XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
19527 \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
19528 \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
19529 \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
19530 \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
19531 \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
19532 \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
19533 \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
19534 \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
19535 \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
19538 minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
19540 bold=\EG, clear=^L\EB,
19541 cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
19542 op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
19543 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
19544 sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
19547 minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
19550 acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
19551 bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
19552 home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
19553 kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
19554 kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
19556 sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
19557 sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
19558 u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
19559 .u8=\001Cu|\004r, use=minitel1b,
19563 # Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
19565 # TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
19566 # Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
19567 # Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
19569 # Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
19570 # Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
19571 # Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
19572 # Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
19574 # Fonctionne par exemple avec Midnight Commander (mc).
19576 minitel2-80|minitel 2 (80cols) avec filets vt100 (DEC),
19578 acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
19579 enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
19580 C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, E0=^O,
19582 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
19583 \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
19584 \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
19585 \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
19586 \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
19587 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
19588 \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
19589 \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
19590 \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
19591 \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
19592 \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
19593 \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
19594 \,+k\,.l\,0\177\,-j,
19597 minitel12-80|minitel 12 (80cols),
19599 civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
19601 .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
19603 .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
19605 C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
19606 E0=^O, S0=\E)3\016,
19607 XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
19608 \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
19609 \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
19610 \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
19611 \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
19612 \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
19613 \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
19614 R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
19615 \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
19616 \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
19617 \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
19618 \,\\\,m\,+k\,.l\,0\177\,-j,
19622 # Add these in your ~/.screenrc for inputting some special glyphs like french
19623 # accentuated chars in 40 cols mode:
19625 # bindkey ^YA digraph '`' # Saisi accent grave.
19626 # bindkey ^YB digraph "'" # Saisi accent aigu.
19627 # bindkey ^YC digraph '^' # Saisi accent circonflexe.
19628 # bindkey ^YH digraph '"' # Saisi accent trema.
19630 # bindkey ^Y# stuff \243 # Livre.
19631 # bindkey "^Y\047" stuff \247 # Paragraphe.
19632 # bindkey ^Yj stuff \306 # AE
19633 # bindkey ^Yz stuff \346 # ae
19634 # bindkey ^YKc stuff \347 # c cedille.
19637 screen.minitel1|Screen specific for minitel1,
19639 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
19641 bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
19642 rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
19645 screen.minitel1b|Screen specific for minitel1b,
19646 kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
19647 kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
19648 kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
19649 use=screen.minitel1,
19651 screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
19652 colors@, ncv@, pairs@,
19653 bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
19654 kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
19655 rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
19656 use=screen.minitel1b,
19658 screen.minitel1-nb|Screen specific for minitel1-nb,
19659 colors@, ncv@, pairs@,
19660 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
19661 use=screen.minitel1,
19663 screen.minitel1b-nb|Screen specific for minitel1b-nb,
19664 colors@, ncv@, pairs@,
19665 bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
19666 use=screen.minitel1b,
19668 # From: Alexandre Montaron, 29 Sep 2016
19670 linux-m1|Linux Minitel 1 "like" Couleurs,
19671 am, bw@, ccc, mir, msgr, xenl,
19672 colors#8, it#8, ncv#16, pairs#64,
19673 acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
19674 \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
19675 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
19676 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
19677 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
19678 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
19679 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
19680 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
19681 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
19682 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
19683 initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
19685 is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
19686 kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r, kcub1=\E[D,
19687 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
19688 kdl1=\E\E[A, kend=\E[4~, kent=\EOM, kf1=\E[[A, kf10=\E[21~,
19689 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
19690 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
19691 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
19692 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
19693 khome=\E[1~, kich1=\E[2~, kil1=\E\E[B, kmous=\E[M,
19694 knp=\E[6~, kpp=\E[5~, nel=\EE, oc=\E]R\E]P3FFFF80,
19695 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
19696 rmam=\E[?7l, rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m,
19697 rs1=\Ec, rs3=\E[37;40m\E[8], sc=\E7, setab=\E[4%p1%dm,
19698 setaf=\E[3%p1%dm, sgr0=\E[m, smacs=^N, smam=\E[?7h,
19699 smir=\E[4h, smpch=\E[11m, smso=\E[7m, tbc=\E[3g,
19700 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\EZ,
19701 vpa=\E[%i%p1%dd, .VN=\E[?5l, .VR=\E[?5h, .am@,
19702 .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H, .rmcup=,
19703 .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
19705 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19706 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19707 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19708 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19709 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19710 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19711 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19712 \n\n\n\n\n\n\n\n\n\n,
19714 # 1. Using double-shapes for vt100 graphical chars (eg: mc).
19715 # 2. Native brown color corrected to good yellow color.
19716 # 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
19717 # 4. Suppressed nonexistent underlined mode (normally as bright).
19718 # 5. ich/ich1 not filled because of non-curses programs.
19720 # 6. Suppressed nonexistent invisible mode.
19721 #(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
19723 linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
19725 colors@, ncv@, pairs@,
19726 acsc@, bold=\E[33m, enacs@, initc@,
19727 is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
19728 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
19729 FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
19730 oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
19731 .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
19732 A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
19733 PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
19736 linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
19738 colors@, ncv@, pairs@,
19739 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
19740 uvvwwxxyyzz{{||}}~~,
19741 bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
19742 enacs=\E)0, initc@,
19743 is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
19744 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
19745 FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
19747 oc@, op@, rmacs=^O, setab=^A, setaf=^A, sgr0=\E[;37m, smacs=^N,
19749 .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
19750 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
19751 PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
19752 \E]PFFFFFFF\E[;37m,
19755 # Screen entries counterpart :
19757 screen.linux-m1|Linux m1 specific for screen,
19759 dim=\E[2m, kbs=^?, kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~,
19760 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
19761 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
19762 smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
19763 E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19764 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19765 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19766 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19767 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19768 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19769 \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
19770 \n\n\n\n\n\n\n\n\n\n,
19773 screen.linux-m1b|Linux m1b specific for screen,
19775 op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
19777 screen.linux-m2|Linux m2 specific for screen,
19778 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
19779 uvvwwxxyyzz{{||}}~~,
19780 use=screen.linux-m1b,
19784 putty-m1|Putty Minitel 1 "like" Couleurs,
19786 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
19787 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
19788 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
19789 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
19790 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1,
19792 putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
19794 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
19795 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
19796 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
19797 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
19798 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m1b,
19800 putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
19802 acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
19804 dim@, dsl=\E]2;\007, fsl=^G, indn=\E[%p1%dS, kf1=\E[11~,
19805 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
19806 rin=\E[%p1%dT, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
19807 smcup=\E7\E[?47h, smul=\E[4m, tsl=\E]2;, .E3=\E[300S,
19808 .WS=\E[8;%d;%dt, Z0=\E[?3h, Z1=\E[?3l, use=linux-m2,
19811 screen.putty-m1|Putty m1 specific for screen,
19812 dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
19814 screen.putty-m1b|Putty m1b specific for screen,
19816 op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
19818 screen.putty-m2|Putty m2 specific for screen,
19819 acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
19820 uvvwwxxyyzz{{||}}~~,
19821 use=screen.putty-m1b,
19822 # From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
19825 # viewdata lacks a true cup capability,
19826 # so I achieved it with home and cud1/cuf1 sequences only !
19827 viewdata|prestel/viewdata terminals,
19830 bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
19832 cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
19833 \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
19834 %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
19835 \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
19836 \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
19837 %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
19838 %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
19840 cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
19841 .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
19843 viewdata-o|optimized version of viewdata prestel/viewdata terminals,
19844 cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
19845 %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
19846 %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
19847 %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
19848 \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
19849 \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
19850 \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
19851 \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
19852 \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
19853 %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
19854 %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
19855 %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
19856 %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
19857 .ll=^^^K, use=viewdata,
19859 # Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
19861 viewdata-rv|prestel/viewdata terminals with reverse capabilitie (as green),
19863 rmso=\EG, smso=\EB, use=viewdata-o,
19865 ######## OBSOLETE VDT TYPES
19867 # These terminals are *long* dead -- these entries are retained for
19868 # historical interest only.
19870 #### Amtek Business Machines
19873 # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
19874 # but these caps were commented out in 8.3; also, removed overridden
19875 # ":do=^J:" -- esr)
19876 abm80|amtek business machines 80,
19879 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
19880 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
19881 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
19883 #### Bell Labs blit terminals
19885 # These were AT&T's official entries. The 5620 FAQ maintained by
19886 # David Breneman <daveb@dgtl.com> has this to say:
19888 # Actually, in the beginning was the Jerq, and the Jerq was white with a
19889 # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
19890 # was good. But lo, upon the horizon loomed a mighty management-type person
19891 # (known now only by the initials VP) who said, the mighty Jerq must stay
19892 # alone, and could not go forth into the world. So Locanthi and Pike put the
19893 # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
19894 # world. And the Jerq lived the rest of its days in research, but never
19895 # strayed from those paths.
19897 # In all seriousness, the Blit was originally known as the Jerq, but when
19898 # it started to be shown outside of the halls of the Bell Labs Research
19899 # organization, the management powers that be decided that the name could
19900 # not remain. So it was renamed to be Blit. This was in late 1981.
19902 # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
19906 blit|jerq|blit running teletype rom,
19908 cols#87, it#8, lines#72,
19909 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
19910 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
19911 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
19912 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
19913 il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kcub1=\ED,
19914 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
19916 # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
19917 cbblit|fixterm|blit running columbus code,
19919 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
19920 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
19921 smul=\EU", use=blit,
19923 oblit|ojerq|first version of blit rom,
19924 am, da, db, eo, mir, ul, xon,
19925 cols#88, it#8, lines#72,
19926 bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
19927 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
19928 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
19929 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER,
19932 #### Bolt, Beranek & Newman (bbn)
19934 # The BitGraph was a product of the now-defunct BBN Computer Corporation.
19935 # The parent company, best known as the architects of the Internet, is
19938 # Jeff DelPapa <dp@world.std.com> writes:
19939 # The bitgraph was a large white box that contained a monochrome bitmap
19940 # display, and a 68000 to run it. You could download code and run it on
19941 # the cpu, it had 128kb (I think) of memory. I used one in the late
19942 # 70's, sure beat a vt100. It had one strange feature tho -- it used
19943 # the cpu to bitblt pixels to scroll, it took longer than the refresh
19944 # rate, and looked like a rubber sheet stretching, then snapping
19945 # upwards. It had everything the early mac had, except a floppy drive a
19946 # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
19947 # Beranek and Neuman) sold at most a few hundred of them to the real
19948 # world. DOD may have bought more...
19951 # Entries for the BitGraph terminals. The problem
19952 # with scrolling in vi can only be fixed by getting BBN to put
19953 # smarter scroll logic in the terminal or changing vi or padding
19954 # scrolls with about 500 ms delay.
19956 # I always thought the problem was related to the terminal
19957 # counting newlines in its input buffer before scrolling and
19958 # then moving the screen that much. Then vi comes along and
19959 # paints lines in on the bottom line of the screen, so you get
19960 # this big white gap.
19962 bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
19963 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
19965 bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
19966 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
19968 bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
19971 bel=^G, clear=\E[H\E[J$<150>, cr=\r,
19972 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
19973 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
19974 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
19975 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
19976 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
19977 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
19978 sgr0=\E[m, smkx=\E=, smso=\E[7m,
19980 bg1.25rv|bbn bitgraph 1.25 (reverse video),
19981 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
19983 bg1.25nv|bbn bitgraph 1.25 (normal video),
19984 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
19986 # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
19987 bg1.25|bbn bitgraph 1.25,
19989 bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B,
19990 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
19991 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
19992 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
19993 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
19994 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
19995 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
19998 #### Bull (bq, dku, vip)
20000 # (Adapted for terminfo; AIX extension capabilities translated -- esr)
20002 #============================================#
20003 # BULL QUESTAR 210 `SDP' terminals emulation #
20004 #============================================#
20006 # Description written by R.K.Saunders (Bull Transac)
20008 # Modifications written by F. Girard (Bull MTS)
20009 # 19-05-87 V02.00.01
20010 # 17-12-87 V02.00.02
20011 # 15-09-89 V02.00.05
20013 # Typical technical selections F1 (modes SDP/ROLL):
20014 # -------------------------------------------------------
20015 # | 01 02 03 04 05 06 07 08 09 10 |
20016 # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
20018 # | 11 12 13 14 15 16 17 18 19 20 |
20019 # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
20021 # | 21 22 23 24 25 26 27 28 29 30 |
20022 # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
20024 # | 31 32 33 34 35 36 37 38 39 40 |
20025 # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
20026 # -------------------------------------------------------
20027 # Typical firmware identification F5 "etat 6":
20028 # P287.02.04b (AZERTY)
20029 # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
20030 # P298.03.03 (monochrome) or P374.03.02 (colour)
20032 # SM SDP mode (VIP command): ^[[?=h
20033 # RIS (erases screen): ^[c
20034 # DMI disable keyboard: ^[`
20035 # SM double rendition mode: ^[[?>h
20036 # RM solicited status mode: ^[[5l
20037 # RM character mode: ^[[>l
20038 # RM echoplex mode: ^[[12l
20039 # RM column tab mode: ^[[18l
20040 # RM forbid SS2 keyboard mode: ^[[?<l
20041 # SM scroll mode: ^[[=h
20042 # FCF enable XON/XOFF: ^[P1s^[\
20043 # MTL select end msg character: ^[[^Wp
20044 # EMI enable keyboard: ^[b
20045 # RIS retour etat initial: ^[c
20046 # enable FC keypad: ^[[?<h,
20047 # MPW map status line window: ^[PY99:98^[\
20048 # SCP select status line: ^[[0;98v
20049 # ED erase entire partition: ^[[2J
20050 # SCP select main partition: ^[[v
20051 # SM character insertion mode: ^[[4h
20052 # RM character replacement mode: ^[[4l
20053 # COO cursor on: ^[[r
20054 # COO cursor off: ^[[1r
20055 # SGR dim (turquoise) rev attr: ^[[2;7m
20056 # SGR Data normal attr: ^[[m
20057 # SO Line-graphic mode ON: ^N
20058 # SI Line-graphic mode OFF: ^O
20059 # MC start routing to printer: ^[[5i
20060 # MC stop routing to printer: ^M^[[4i
20063 # This entry covers the following terminals:
20064 # dku7102, tws2102, and tws models 2105 to 2112
20065 tws-generic|dku7102|Bull Questar tws terminals,
20066 am, eslok, hs, mir, msgr, xenl, xhp@, xon,
20067 cols#80, it#8, lines#24, wsl#80,
20068 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
20069 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
20070 cnorm=\E[r, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
20071 cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
20072 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
20073 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
20074 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
20075 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
20076 il1=\E[L, ind=\n, invis=\E[0;8m,
20077 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
20078 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
20079 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
20080 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
20081 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
20082 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
20083 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
20084 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
20085 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
20086 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
20087 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
20088 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
20089 %p7%t;8%;m%?%p9%t\016%e\017%;,
20090 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
20091 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
20092 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
20093 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
20094 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
20096 tws2103|xdku|BULL Questar tws2103,
20097 ht=^I, use=tws-generic,
20098 tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
20099 ht=^I, use=tws2102-sna,
20100 dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
20101 clear=\E[2J\E[H, cup@, dl@, dl1@,
20102 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
20103 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
20105 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
20106 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
20107 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
20108 %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
20109 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
20111 #=========================================================#
20112 # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
20113 #=========================================================#
20115 # Description written by J. Staerck (BULL SA)
20116 # Copyright (c) 1989 BULL SA
20117 #---------------------------------------------------------------------------
20118 # This entry is used for terminals with vt320 emulation mode
20119 # and following set-up :
20120 # 8 bit ISO Latin Character Set (ISO 8859-1),
20121 # 7 bit Control Characters,
20122 # 80 columns screen.
20123 # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
20124 # They are used in string capabilities with vt220-320 emulation mode.
20125 # In the following DEC definitions, two kinds of terminfo databases are
20127 # 1. the first with Command Sequence Introducer starting with escape
20128 # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
20129 # 2. the second with Command Sequence Introducer starting with escape
20130 # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
20131 # Soft Terminal Reset esc [ ! p
20132 # RIS (erases screen): esc c
20133 # DECKPNM numeric keypad mode: esc >
20134 # DECKPAM applic. keypad mode: esc =
20135 # DECSTBM Scrolling region: esc [ r
20136 # SCS select G0 = US: esc ( B
20137 # SCS select G1 = line-graphic: esc ) 0
20138 # Select 7-bit C1 controls: esc sp F
20139 # Select 8-bit C1 controls: esc sp G
20140 # Select cursor home: esc [ H
20141 # Select erase screen: esc [ J
20142 # SM KAM lock keyboard: esc [ 2 h
20143 # RM KAM unlock keyboard: esc [ 2 l
20144 # SM SRM local echo off: esc [ 1 2 h
20145 # RM SRM local echo on: esc [ 1 2 l
20146 # SM LNM New line : esc [ 2 0 h
20147 # RM LNM return = CR only: esc [ 2 0 l
20148 # SM DECCKM cursor keys mode: esc [ ? 1 h
20149 # RM DECCKM appli. keys mode: esc [ ? 1 l
20150 # SM DECANM ANSI mode on: esc [ ? 2 h
20151 # RM DECANM ANSI mode off: esc [ ? 2 l
20152 # SM DECCOLM 132-column screen: esc [ ? 3 h
20153 # RM DECCOLM 80-column screen: esc [ ? 3 l
20154 # SM DECSCLM Smooth scroll: esc [ ? 4 h
20155 # RM DECSCLM Jump scroll: esc [ ? 4 l
20156 # SM DECSCNM screen light backgr. esc [ ? 5 h
20157 # RM DECSCNM screen dark backgr. esc [ ? 5 l
20158 # SM DECOM move within margins: esc [ ? 6 h
20159 # RM DECOM move outside margins: esc [ ? 6 l
20160 # SM DECAWM auto right margin: esc [ ? 7 h
20161 # RM DECAWM auto right margin: esc [ ? 7 l
20162 # SM DECARM auto repeat: esc [ ? 8 h
20163 # RM DECARM auto repeat: esc [ ? 8 l
20164 # DECSASD Select active main: esc [ 0 $ }
20165 # DECSASD Select active status: esc [ 1 $ }
20166 # DECSSDT Select status none: esc [ 0 $ ~
20167 # DECSSDT Select status indic.: esc [ 1 $ ~
20168 # DECSSDT Select status host-wr: esc [ 2 $ ~
20169 # SM DECTCEM Visible cursor: esc [ ? 2 5 h
20170 # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
20171 # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
20172 # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
20173 # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
20174 # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
20175 # SM DECKBUM clavier informatique esc [ ? 6 8 h
20176 # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
20177 # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
20178 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
20179 # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
20180 # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
20181 # Char. and Line attributes: esc [ Ps ... Ps m
20182 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
20183 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
20186 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
20187 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
20188 am, eo, eslok, hs, km, mir, msgr, xenl, xon,
20189 cols#80, it#8, lines#24, vt#3, wsl#80,
20190 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20191 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
20192 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
20193 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
20194 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20195 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20196 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
20197 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
20198 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
20199 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
20200 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
20201 is1=\E[63;1"p\E[2h,
20202 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20204 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
20205 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
20206 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
20207 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
20208 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
20209 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
20210 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
20211 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
20212 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
20213 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
20214 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
20215 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
20217 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
20218 %;m%?%p9%t\E(0%e\E(B%;,
20219 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
20220 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
20221 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
20222 bq300-rv|Bull vt320 reverse 80 columns,
20223 flash=\E[?5l$<50>\E[?5h,
20224 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20227 bq300-w|Bull vt320 132 columns,
20229 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20231 rs2=\E[?3h, use=bq300,
20232 bq300-w-rv|Bull vt320 reverse mode 132 columns,
20234 flash=\E[?5l$<50>\E[?5h,
20235 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20237 rs2=\E[?3h, use=bq300,
20239 # This entry is used for terminals with vt320 emulation mode
20240 # and following set-up :
20241 # 8 bit ISO Latin Character Set (ISO 8859-1),
20242 # 8 bit Control Characters, (CSI coded as x9B for ESC [)
20243 # 80 columns screen.
20244 # Soft Terminal Reset csi ! p
20245 # RIS (erases screen): esc c
20246 # DECKPNM numeric keypad mode: esc >
20247 # DECKPAM applic. keypad mode: esc =
20248 # DECSTBM Scrolling region: esc [ r
20249 # SCS select G0 = US: esc ( B
20250 # SCS select G1 = line-graphic: esc ) 0
20251 # Select 7-bit C1 controls: esc sp F
20252 # Select 8-bit C1 controls: esc sp G
20253 # Select cursor home: csi H
20254 # Select erase screen: csi J
20255 # SM KAM lock keyboard: csi 2 h
20256 # RM KAM unlock keyboard: csi 2 l
20257 # SM SRM local echo off: csi 1 2 h
20258 # RM SRM local echo on: csi 1 2 l
20259 # SM LNM New line : csi 2 0 h
20260 # RM LNM return = CR only: csi 2 0 l
20261 # SM DECCKM cursor keys mode: csi ? 1 h
20262 # RM DECCKM appli. keys mode: csi ? 1 l
20263 # SM DECANM ANSI mode on: csi ? 2 h
20264 # RM DECANM ANSI mode off: csi ? 2 l
20265 # SM DECCOLM 132-column screen: csi ? 3 h
20266 # RM DECCOLM 80-column screen: csi ? 3 l
20267 # SM DECSCLM Smooth scroll: csi ? 4 h
20268 # RM DECSCLM Jump scroll: csi ? 4 l
20269 # SM DECSCNM screen light backgr. csi ? 5 h
20270 # RM DECSCNM screen dark backgr. csi ? 5 l
20271 # SM DECOM move within margins: csi ? 6 h
20272 # RM DECOM move outside margins: csi ? 6 l
20273 # SM DECAWM auto right margin: csi ? 7 h
20274 # RM DECAWM auto right margin: csi ? 7 l
20275 # SM DECARM auto repeat: csi ? 8 h
20276 # RM DECARM auto repeat: csi ? 8 l
20277 # DECSASD Select active main: csi 0 $ }
20278 # DECSASD Select active status: csi 1 $ }
20279 # DECSSDT Select status none: csi 0 $ ~
20280 # DECSSDT Select status indic.: csi 1 $ ~
20281 # DECSSDT Select status host-wr: csi 2 $ ~
20282 # SM DECTCEM Visible cursor: csi ? 2 5 h
20283 # RM DECTCEM Invisible cursor: csi ? 2 5 l
20284 # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
20285 # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
20286 # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
20287 # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
20288 # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
20289 # Char. and Line attributes: csi Ps ... Ps m
20290 # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
20291 # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
20292 # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
20293 bq300-8|Bull vt320 full 8 bits 80 columns,
20294 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
20295 cols#80, it#8, lines#24, vt#3, wsl#80,
20296 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20297 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
20298 clear=\233H\233J, cnorm=\233?25h, cr=\r,
20299 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
20300 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
20301 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
20302 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
20303 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
20304 el=\233K, el1=\2331K, enacs=\E(B\E)0,
20305 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
20306 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
20307 ind=\ED, is1=\E[63;2"p\E[2h,
20308 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20310 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
20311 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
20312 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
20313 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
20314 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
20315 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
20316 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
20317 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
20318 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
20319 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
20320 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
20321 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
20322 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
20323 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
20324 s0ds=\E(B, s1ds=\E(0, sc=\E7,
20325 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
20326 1%;m%?%p9%t\E(0%e\E(B%;,
20327 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
20328 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
20329 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
20330 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
20331 flash=\233?5l$<50>\233?5h,
20332 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20335 bq300-8w|Bull vt320 8-bit 132 columns,
20337 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20339 rs2=\233?3h, use=bq300-8,
20340 bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
20342 flash=\233?5l$<50>\233?5h,
20343 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20345 rs2=\233?3h, use=bq300-8,
20347 # This entry is used for terminals with vt320 emulation mode
20348 # a 102 keys keyboard (PC scancode !) and following set-up :
20349 # 8 bit ISO Latin Character Set (ISO 8859-1),
20350 # 7 bit Control Characters,
20351 # 80 columns screen.
20352 bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
20353 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
20354 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
20355 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
20356 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
20357 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
20358 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
20359 bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
20360 flash=\E[?5l$<50>\E[?5h,
20361 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20364 bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
20366 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20368 rs2=\E[?3h, use=bq300-pc,
20369 bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
20371 flash=\E[?5l$<50>\E[?5h,
20372 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
20374 rs2=\E[?3h, use=bq300-pc,
20375 # 8 bit ISO Latin Character Set (ISO 8859-1),
20376 # 8 bit Control Characters,
20377 # 80 columns screen.
20378 bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
20379 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
20380 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
20381 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
20382 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
20383 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
20384 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
20385 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
20386 bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
20387 flash=\E[?5l$<50>\E[?5h,
20388 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20391 bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
20393 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20395 rs2=\E[?3h, use=bq300-8-pc,
20396 bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
20398 flash=\E[?5l$<50>\E[?5h,
20399 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
20401 rs2=\E[?3h, use=bq300-8-pc,
20403 #======================================================#
20404 # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
20405 #======================================================#
20407 # normal mode, 8 bits, 80 columns terminal.
20409 # RIS reset initial state: ^[c
20410 # BLE bell enable ^[h
20411 # BLD bell disable ^[g
20412 # CAMS char. attr. mode set ^[[D
20413 # CAMR char. attr. mode reset ^[[G
20415 # KBU keyboard unlock (set) ^[[W
20416 # KBL keyboard lock (reset) ^[[X
20417 # CM character mode (async.) ^[k
20418 # NEP non echoplex mode (by host) ^[l
20419 # EP echoplex mode (by host) ^[m
20420 # IM insert mode set ^[[I
20421 # IM insert mode reset ^[[J
20422 # RMS roll mode set ^[r
20423 # RMR roll mode reset ^[q
20424 # SM78 set mode vip7800 ^[[1q
20425 # SD scroll up (72 lines) ^[[0s
20426 # SD scroll down (72 lines) ^[[1s
20427 # RBM block mode reset ^[[E
20428 # SLS status line set ^[w
20429 # SLR status line reset ^[v
20430 # SLL status line lock ^[O
20431 # LGS Line-graphic mode set ^[G
20432 # LGR Line-graphic mode reset ^[F
20433 # TBC tab clear (at cursor pos.) ^[[g
20434 # TBI tab initialize ^[[N
20435 # TBS tab set (at cursor pos.) ^[p
20436 # PDS print data space ^[[0p
20437 # PHD print host data ^[[3p
20438 # PDT print data terminator ^[[<p
20439 # PRES print adapter reset ^[[2p
20440 # SSPR multi-part. reset ^[[<>u
20441 # SSP0 partition 0 set ^[[00u
20442 # SSP1 partition n format 1 ^[[PnPnSTRINGu
20443 # SSP2 partition n format 2 ^[[PnPnSTRINGu
20444 # SSP3 partition n format 3 ^[[PnPnu
20445 # ATR attribute (visual)
20448 # hide (blank) : ^[sH
20450 # inverse video : ^[sI
20455 # This covers the vip7800 and BQ3155-vip7800
20456 vip|Bull Questar 3155-7800,
20457 am, eslok, hs, km, mc5i, msgr, xenl, xon,
20458 cols#80, it#8, lines#24, vt#3, wsl#80,
20459 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
20460 cbt=\E[Z, clear=\E`, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20461 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
20462 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
20463 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
20464 hts=\Ep, ich1=\E[I, ind=\n, invis=\EsH,
20465 is2=\E[00u\E[<>001001024080024080u\E[01u,
20466 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
20467 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
20468 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
20469 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
20470 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
20471 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
20472 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
20473 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
20474 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
20475 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
20476 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
20477 mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI,
20478 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
20479 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
20480 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
20481 smul=\Es_, tbc=\E[N, tsl=\Ew,
20482 # normal screen, 8 bits, 132 columns terminal.
20483 vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
20485 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
20486 vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
20488 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
20489 vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
20490 cols#132, lines#72, wsl#132,
20491 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
20496 # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
20497 # that is smaller than the screen, and puts up a warning message
20498 # outside the window. Te erases the warning message, puts the
20499 # window back to be the whole screen, and puts the cursor at just
20500 # below the small window. I defined <cnorm> and <civis> to really turn
20501 # the cursor on and off, but I have taken this out since I don't
20502 # like the cursor being turned off when vi exits.
20503 cg7900|chromatics|chromatics 7900,
20506 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^],
20507 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
20508 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|,
20509 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
20511 rmso=\001C1\,\001c2\,,
20512 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
20513 ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
20514 \001W0\,0\,79\,39\,,
20515 smso=\001C4\,\001c7\,, uc=^A^A_^A\0,
20517 #### Computer Automation
20520 ca22851|computer automation 22851,
20523 bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
20524 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n,
20525 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
20530 # This entry has correct padding and the undocumented "ri" capability
20531 cyb83|xl83|cybernex xl-83,
20534 bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
20535 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
20536 ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
20537 kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
20538 # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
20539 cyb110|mdl110|cybernex mdl-110,
20542 bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
20543 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
20544 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
20545 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
20546 ht=\011$<43>, ich1=\016A\035$<3.5>,
20547 il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF,
20551 # Datapoint is gone. They used to be headquartered in Texas.
20552 # They created ARCnet, an Ethernet competitor that flourished for a while
20553 # in the early 1980s before 3COM got wise and cut its prices. The service
20554 # side of Datapoint still lives (1995) in the form of Intelogic Trace.
20557 dp3360|datapoint|datapoint 3360,
20560 bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
20561 ed=^_, el=^^, home=^], ind=\n,
20563 # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
20564 # The Datapoint 8242 Workstation was sold at least between 1985
20565 # and 1989. To make the terminal work with this entry, press
20566 # CONTROL-INT-INT to take the terminal off-line, and type (opt).
20567 # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
20568 # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
20569 # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
20570 # fact unusable because the strings sent by the terminal conflict
20571 # with other keys).
20572 # The terminal is capable of displaying "box draw" characters.
20573 # For each graphic character you must send 2 ESC's (\E\E) followed
20574 # by a control character as follows:
20575 # character meaning
20576 # ========= =======
20579 # ctrl-G bottom tee
20582 # ctrl-J top left corner
20583 # ctrl-K top right corner
20584 # ctrl-L bottom left corner
20585 # ctrl-M bottom right corner
20586 # ctrl-N horizontal line
20587 # ctrl-O vertical line
20588 # Unfortunately this cannot be fitted into the termcap/terminfo
20589 # description scheme.
20590 dp8242|datapoint 8242,
20593 bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
20594 cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z,
20595 ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C,
20596 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
20597 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
20598 kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea,
20599 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n,
20600 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
20601 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
20602 smso=\E^E, smul=\E^F,
20603 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
20606 #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
20608 # These entries are DEC's official terminfos for its older terminals.
20609 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
20610 # Engineering for more information. Updated terminfos and termcaps
20611 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
20617 bel=^G, cr=\r, cub1=^H, cud1=\n,
20621 bel=^G, cr=\r, cub1=^H, cud1=\n,
20625 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20626 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n,
20630 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
20631 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
20632 el=\EK, ht=^I, ind=\n, ri=\EI,
20633 # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
20634 vt61|vt-61|vt61.5|dec vt61,
20636 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
20637 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
20638 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
20639 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
20642 # The gigi does standout with red!
20643 # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
20644 gigi|vk100|dec gigi graphics terminal,
20647 bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H,
20648 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
20649 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
20650 el=\E[K, ht=^I, ind=\n,
20651 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
20652 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
20653 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
20654 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
20655 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
20658 # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
20659 # a PC differentiated from the IBM clones. It was a total, ludicrous,
20660 # grossly-overpriced failure (among other things, DEC's OS didn't include
20661 # a format program, so you had to buy pre-formatted floppies from DEC at
20662 # a hefty premium!).
20663 pro350|decpro|dec pro console,
20665 cols#80, it#8, lines#24,
20666 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
20667 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
20668 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
20669 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20670 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
20671 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
20672 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
20677 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
20678 dw2|decwriter|dw|decwriter II,
20681 bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
20682 # \E(B Use U.S. character set (otherwise # => british pound !)
20683 # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
20684 # \E[w 10 char/in pitch
20685 # \E[1;132 full width horizontal margins
20686 # \E[2g clear all tab stops
20688 # \E[66t 66 lines/page (for \f)
20689 # \E[1;66r full vertical page can be printed
20690 # \E[4g clear vertical tab stops
20691 # \E> disable alternate keypad mode (so it transmits numbers!)
20692 # \E[%i%p1%du set tab stop at column %d (origin == 1)
20693 # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
20696 # The dw3 does standout with wide characters.
20698 dw3|la120|decwriter III,
20701 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
20702 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
20703 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
20705 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
20709 bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
20710 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
20712 # These aren't official
20713 ln03|dec ln03 laser printer,
20716 bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
20717 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
20719 ln03-w|dec ln03 laser printer 132 cols,
20721 bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
20722 kcud1=\n, nel=\r\n, use=ln03,
20724 #### Delta Data (dd)
20727 # Untested. The cup sequence is hairy enough that it probably needs work.
20728 # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
20729 # There are BSD-derived termcap entries floating around for this puppy
20730 # that are *certainly* wrong.
20731 delta|dd5000|delta data 5000,
20734 bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y,
20735 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
20737 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n,
20739 #### Digital Data Research (ddr)
20742 # (ddr: I added <rmam>/<smam> based on the init string -- esr)
20743 ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
20745 cols#80, it#8, lines#24, vt#3,
20746 blink=\E[5m$<2/>, bold=\E[1m$<2/>,
20747 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
20748 cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
20749 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
20750 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
20751 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
20752 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
20753 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
20754 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
20755 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
20756 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
20759 #### Evans & Sutherland
20762 # Jon Leech <leech@cs.unc.edu> tells us:
20763 # The ps300 was the Evans & Sutherland Picture System 300, a high
20764 # performance 3D vector graphics system with a bunch of specialized hardware.
20765 # Approximate date of release was 1982 (early 80s, anyway), and it had several
20766 # evolutions including (limited) color versions such as the PS330C. PS300s
20767 # were effectively obsolete by the late 80s, replaced by raster graphics
20768 # systems, although specialized applications like molecular modeling
20769 # hung onto them for a while longer. AFAIK all E&S vector graphics systems
20770 # are out of production, though of course E&S is very much alive (in 1996).
20771 # (ps300: changed ":pt@:" to "it@" -- esr)
20773 ps300|Picture System 300,
20776 rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
20778 #### General Electric (ge)
20781 terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
20784 bel=^G, cr=\r, cud1=\n, ind=\n,
20786 #### Heathkit/Zenith
20789 # Here is a description of the H19 DIP switches:
20792 # 0-3 = baud rate as follows:
20797 # 0 1 0 1 1200 baud
20798 # 1 0 0 0 2400 baud
20799 # 1 0 1 0 4800 baud
20800 # 1 1 0 0 9600 baud
20801 # 1 1 0 1 19.2K baud
20803 # 4 = parity (0 = no parity)
20804 # 5 = even parity (0 = odd parity)
20805 # 6 = stick parity (0 = normal parity)
20806 # 7 = full duplex (0 = half duplex)
20809 # 0 = block cursor (0 = underscore cursor)
20810 # 1 = no key click (0 = keyclick)
20811 # 2 = wrap at end of line (0 = no wrap)
20812 # 3 = auto LF on CR (0 = no LF on CR)
20813 # 4 = auto CR on LF (0 = no CR on LF)
20814 # 5 = ANSI mode (0 = VT52 mode)
20815 # 6 = keypad shifted (0 = keypad unshifted)
20816 # 7 = 50Hz refresh (1 = 60Hz refresh)
20818 # Factory Default settings are as follows:
20820 # S401 1 0 0 0 1 1 0 0
20821 # S402 0 0 0 0 0 0 0 0
20822 # (h19: I added <rmam>/<smam> based on the init string;
20823 # also added empty <acsc> to suppress a tic warning -- esr)
20824 h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
20825 OTbs, am, mir, msgr,
20826 cols#80, it#8, lines#24,
20827 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
20828 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
20829 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
20830 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n,
20831 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
20832 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
20833 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
20834 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
20835 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
20836 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
20837 h19-bs|heathkit w/keypad shifted,
20838 rmkx=\Eu, smkx=\Et, use=h19-b,
20839 h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
20840 rmkx=\Eu, smkx=\Et, use=h19-u,
20841 # (h19: merged in <ip> from BSDI hp19-e entry>;
20842 # also added empty <acsc> to suppress a tic warning --esr)
20843 # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
20844 # Tim tells us that:
20845 # I have an old Zenith-19 terminal at home that still gets a lot of use.
20846 # This terminal suffers from the same famous insert-mode padding lossage
20847 # that has been acknowledged for the Z29 terminal. Emacs is nearly
20848 # unusable on this box, since even a half-scroll up or down the window
20849 # causes flaming terminal death.
20851 # On the Z19, the only way I have found around this problem is to remove
20852 # the :al: and :dl: entries entirely. No amount of extra padding will
20853 # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
20854 # makes Emacs a little slower, but it remains in the land of the living.
20856 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
20857 OTbs, am, eslok, hs, mir, msgr,
20858 cols#80, it#8, lines#24,
20859 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
20860 clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
20861 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
20862 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n,
20863 ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20864 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
20865 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
20866 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
20867 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
20868 h19-u|heathkit with underscore cursor,
20869 cnorm@, cvvis@, use=h19-b,
20870 h19-g|h19g|heathkit w/block cursor,
20871 cnorm=\Ex4, cvvis@, use=h19-b,
20872 alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
20874 dl1=\EM, il1=\EL, use=h19,
20876 # The major problem with the Z29 is that it requires more padding than the Z19.
20878 # The problem with declaring an H19 to be synonymous with a Z29 is that
20879 # it needs more padding. It especially loses if a program attempts
20880 # to put the Z29 into insert mode and insert text at 9600 baud. It
20881 # even loses worse if the program attempts to insert tabs at 9600
20882 # baud. Adding padding to text that is inserted loses because in
20883 # order to make the Z29 not die, one must add so much padding that
20884 # whenever the program tries to use insert mode, the effective
20885 # rate is about 110 baud.
20887 # What program would want to put the terminal into insert mode
20888 # and shove stuff at it at 9600 baud you ask?
20890 # Emacs. Emacs seems to want to do the mathematically optimal
20891 # thing in doing a redisplay rather than the practical thing.
20892 # When it is about to output a line on top of a line that is
20893 # already on the screen, instead of just killing to the end of
20894 # the line and outputting the new line, it compares the old line
20895 # and the new line and if there are any similarities, it
20896 # constructs the new line by deleting the text on the old line
20897 # on the terminal that is already there and then inserting new
20898 # text into the line to transform it into the new line that is
20899 # to be displayed. The Z29 does not react kindly to this.
20901 # But don't cry for too long.... There is a solution. You can make
20902 # a termcap entry for the Z29 that says the Z29 has no insert mode.
20903 # Then Emacs cannot use it. "Oh, no, but now inserting into a
20904 # line will be really slow", you say. Well there is a sort of a
20905 # solution to that too. There is an insert character option on
20906 # the Z29 that will insert one character. Unfortunately, it
20907 # involves putting the terminal into ansi mode, inserting the
20908 # character, and changing it back to H19 mode. All this takes 12
20909 # characters. Pretty expensive to insert one character, but it
20910 # works. Either Emacs doesn't try to use its inserting hack when
20911 # it's only given an insert character ability or the Z29 doesn't
20912 # require padding with this (the former is probably more likely,
20913 # but I haven't checked it out).
20914 # (z29: added empty <acsc> to suppress a tic warning, merged in
20915 # status line capabilities from BRL entry --esr)
20916 z29|zenith29|z29b|zenith z29b,
20917 OTbs, OTpt, am, eslok, hs, mir, msgr,
20918 OTkn#10, cols#80, lines#24,
20919 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
20920 cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
20921 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
20922 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
20923 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
20924 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
20925 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
20926 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
20927 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
20928 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
20929 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
20930 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
20931 # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
20932 # the world is stable. <rs1> causes the terminal to be reset to the state
20933 # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
20934 # cursor, bc -> block cursor.
20935 # From: Mike Meyers
20936 # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
20937 # looks vt100-compatible -- esr)
20938 z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
20939 OTbs, OTpt, am, eslok, hs, mir, msgr,
20940 OTkn#10, cols#80, it#8, lines#24,
20941 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
20942 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
20943 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
20944 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20945 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
20946 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
20947 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
20948 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
20949 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
20950 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
20951 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
20952 mc0=\E#7, nel=\r\ED, rc=\E[r, rev=\E[7m, ri=\EM,
20953 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
20954 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
20956 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
20957 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
20958 z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
20959 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
20962 z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
20963 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
20966 z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
20967 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
20970 # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
20971 z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
20972 am, eslok, hs, mc5i, mir, msgr, xon,
20974 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
20975 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
20976 clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
20977 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
20978 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
20979 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
20980 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
20981 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
20982 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
20983 ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
20984 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
20985 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
20986 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
20987 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
20988 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
20989 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
20990 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
20991 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
20992 tsl=\E[s\E[>1h\E[25;%i%p1%dH,
20994 # From: Brad Brahms <Brahms@USC-ECLC>
20995 z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
20996 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
20997 # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
20998 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
20999 OTbs, OTpt, mir, msgr,
21000 OTkn#10, cols#80, it#8, lines#24,
21001 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
21002 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
21003 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
21004 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
21005 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
21006 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
21007 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
21008 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
21009 smir=\E@, smso=\Ep,
21010 p19|h19-b with il1/dl1,
21011 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
21012 # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
21013 # (ztx: removed duplicate :sr: -- esr)
21014 ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
21015 OTbs, am, eslok, hs,
21016 cols#80, it#8, lines#24,
21017 clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
21018 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
21019 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
21020 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
21021 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
21022 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
21023 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
21024 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
21026 #### IMS International (ims)
21028 # There was a company called IMS International located in Carson City,
21029 # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
21030 # bus/Z80 hardware and a line of terminals called Ultimas.
21033 # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
21034 ims950-b|bare ims950 no init string,
21036 # (ims950: removed obsolete ":ko@:" -- esr)
21037 ims950|ims televideo 950 emulation,
21039 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21040 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
21041 # (ims950-rv: removed obsolete ":ko@:" -- esr)
21042 ims950-rv|ims tvi950 rev video,
21044 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
21045 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
21046 ims-ansi|ultima2|ultimaII|IMS Ultima II,
21048 cols#80, it#8, lines#24,
21049 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
21050 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
21051 ht=^I, if=/usr/share/tabset/vt100,
21052 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
21053 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
21054 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
21057 #### Intertec Data Systems
21059 # I think this company is long dead as of 1995. They made an early CP/M
21060 # micro called the "Intertec Superbrain" that was moderately popular,
21061 # then sank out of sight.
21064 superbrain|intertec superbrain,
21067 OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
21068 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
21069 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U,
21070 kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
21071 # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
21072 # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
21073 # and the reverse is actually true. Try it. -- esr)
21074 intertube|intertec|Intertec InterTube,
21077 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
21078 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
21079 ind=\n, rmso=\E0@, smso=\E0P,
21080 # The intertube 2 has the "full duplex" problem like the tek 4025: if you
21081 # are typing and a command comes in, the keystrokes you type get interspersed
21082 # with the command and it messes up
21083 intertube2|intertec data systems intertube 2,
21085 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
21086 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
21087 ll=^K^X\r, vpa=\013%p1%c, use=intertube,
21089 #### Ithaca Intersystems
21091 # This company made S100-bus personal computers long ago in the pre-IBM-PC
21092 # past. They used to be reachable at:
21094 # Ithaca Intersystems
21095 # 1650 Hanshaw Road
21096 # Ithaca, New York 14850
21098 # However, the outfit went bankrupt years ago.
21101 # The Graphos III was a color graphics terminal from Ithaca Intersystems.
21102 # These entries were written (originally in termcap syntax) by Brian Yandell
21103 # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
21104 # University of Wisconsin.
21106 # (graphos: removed obsolete and syntactically incorrect :kn=4:,
21107 # removed <if=/usr/share/tabset/init.graphos> and
21108 # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
21109 graphos|graphos III,
21111 cols#80, it#8, lines#24,
21112 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
21113 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
21114 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21115 cuu=\E[%p1%dA, cuu1=\E[A,
21116 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
21117 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
21118 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21119 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
21120 kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
21121 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
21122 smir=\E[4h, smso=\E[7m,
21123 graphos-30|graphos III with 30 lines,
21125 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
21129 # These people used to be reachable at:
21132 # 1393 Main Street,
21133 # Waltham, MA 02154
21134 # Vox: (617)-890-5796.
21136 # However, if you call that number today you'll get an insurance company.
21137 # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
21138 # 26 Feb 1997 that says:
21140 # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
21141 # for ~7 years. Modgraph still in business. Products are rugged laptop and
21142 # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
21143 # panel-mount etc). I can be emailed at sonfour@aol.com
21145 # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
21146 # dated 1984. According to the manual, it featured Tek 4010/4014
21147 # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
21150 modgraph|mod24|modgraph terminal emulating vt100,
21153 cvvis=\E\^9;0s\E\^7;1s,
21154 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
21155 ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
21156 \E\^11;81s\E\^11;89s,
21157 rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
21158 # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
21159 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
21161 cols#80, it#8, lines#24,
21162 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
21163 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
21164 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
21165 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
21166 \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
21167 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
21168 1s\E\^9;1s\E\^27;1,
21171 # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
21172 # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
21173 # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
21174 # mark and using delete-to-killbuffer work correctly. However, we would
21175 # like normal mode of operation to be using a Modgraph with 48 line setting.
21176 # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
21177 # the setting mark and delete-to-killbuffer results in the deletion of only
21178 # the line the mark is set on.
21179 # We've discovered that the delete-to-killbuffer works correctly
21180 # with TERM=mod and screen set to 80x48 but it's not obvious. Only
21181 # the first line disappears but a ctrl-l shows that it did work
21183 modgraph48|mod|Modgraph w/48 lines,
21184 OTbs, OTpt, am, xenl,
21185 cols#80, it#8, lines#48, vt#3,
21186 OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
21187 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
21188 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
21189 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
21190 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
21191 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
21192 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
21193 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21194 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
21195 smso=\E[7m, smul=\E[4m,
21197 #### Morrow Designs
21199 # This was George Morrow's company. They started in the late 1970s making
21200 # S100-bus machines. They used to be reachable at:
21203 # 600 McCormick St.
21204 # San Leandro, CA 94577
21206 # but they're long gone now (1995).
21209 # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
21210 # Jeff's specimen was dated June 1984.
21211 # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
21212 mt70|mt-70|Morrow MD-70; native Morrow mode,
21213 am, mir, msgr, xon,
21214 cols#80, it#8, lines#24,
21215 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
21216 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H,
21217 cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
21218 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
21219 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
21220 ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
21221 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
21222 kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
21223 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
21224 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
21225 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
21226 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
21227 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
21228 smul=\EG1, tbc=\E0, use=adm+sgr,
21233 # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
21235 ex155|Motorola Exorterm 155,
21237 OTkn#5, OTug#1, cols#80, lines#24,
21238 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
21239 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
21240 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
21241 kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
21242 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
21246 # This company is still around in 1995, manufacturing point-of-sale systems.
21248 omron|Omron 8025AG,
21251 bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA,
21252 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
21253 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
21257 # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
21258 # were competition for things like the Tektronix 4025.
21261 # Ramtek 6221 from BRL, probably by Doug Gwyn
21262 # The following SET-UP modes are assumed for normal operation:
21263 # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
21264 # NEWLINE_OFF 80_COLUMNS
21265 # Other SET-UP modes may be set for operator convenience or communication
21266 # requirements; I recommend
21267 # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
21268 # Hardware tabs are assumed to be every 8 columns; they can be set up by the
21269 # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
21270 # Note that the Control-E key is useless on this brain-damaged terminal. No
21271 # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
21272 rt6221|Ramtek 6221 80x24,
21273 OTbs, OTpt, msgr, xon,
21274 OTkn#4, cols#80, it#8, lines#24, vt#3,
21275 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
21276 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r,
21277 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
21278 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
21279 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
21280 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
21281 hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21282 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
21283 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
21284 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
21285 rmso=\E[m, rmul=\E[m,
21286 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
21287 \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
21289 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
21290 smul=\E[4m, tbc=\E[3g,
21291 # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
21292 rt6221-w|Ramtek 6221 160x48,
21293 cols#160, lines#48,
21294 ll=\E[48;1H, use=rt6221,
21299 # RCA VP3301 or VP3501
21300 rca|rca vp3301/vp3501,
21303 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
21304 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
21310 # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
21311 # The following SET-UP modes are assumed for normal operation:
21312 # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
21313 # ONLINE ANSI CURSOR_VISIBLE
21314 # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
21315 # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
21316 # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
21317 # For use with graphics software, all graphics modes should be set to factory
21318 # default. Other SET-UP modes may be set for operator convenience or
21319 # communication requirements. No delays are specified; use "stty ixon -ixany"
21320 # to enable DC3/DC1 flow control!
21321 # I commented out the scrolling capabilities since they are too slow.
21322 hirez100|Selanar HiREZ-100,
21323 OTbs, OTpt, mir, msgr, xon,
21324 OTkn#4, cols#80, it#8, lines#48, vt#3,
21325 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
21326 cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
21327 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
21328 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
21329 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
21330 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
21331 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
21332 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
21333 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
21334 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
21335 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
21336 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
21337 9l\E[r\E[m\E(B\017\E)0\E>,
21338 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
21339 smul=\E[4m, tbc=\E[3g,
21340 hirez100-w|Selanar HiREZ-100 in 132-column mode,
21341 cols#132, use=hirez100,
21346 # From University of Wisconsin
21347 vsc|Signetics Vsc Video driver by RMC,
21349 cols#80, it#8, lines#26,
21350 clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
21351 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
21352 ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s,
21353 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
21357 # Alan Frisbie <frisbie@flying-disk.com> writes:
21359 # As you may recall, the Soroc logo consisted of their name,
21360 # with the letter "S" superimposed over an odd design. This
21361 # consisted of a circle with a slightly smaller 15 degree (approx.)
21362 # wedge with rounded corners inside it. The color was sort of
21363 # a metallic gold/yellow.
21365 # If I had been more of a beer drinker it might have been obvious
21366 # to me, but it took a clue from their service department to make
21367 # me exclaim, "Of course!" The circular object was the top of
21368 # a beer can (the old removable pop-top style) and "Soroc" was an
21369 # anagram for "Coors".
21371 # I can just imagine the founders of the company sitting around
21372 # one evening, tossing back a few and trying to decide what to
21373 # call their new company and what to use for a logo.
21376 # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
21377 soroc120|iq120|soroc|soroc iq120,
21378 clear=\E*$<2>, cud1=\n, ed=\EY, el=\ET, kcub1=^H, kcud1=\n,
21379 kcuf1=^L, kcuu1=^K, use=adm3a,
21380 soroc140|iq140|soroc iq140,
21383 bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21384 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
21385 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n,
21386 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
21387 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
21388 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?,
21389 rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A,
21391 #### Southwest Technical Products
21393 # These guys made an early personal micro called the M6800.
21394 # The ct82 was probably its console terminal.
21397 # (swtp: removed obsolete ":bc=^D:" -- esr)
21398 swtp|ct82|southwest technical products ct82,
21401 bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
21402 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
21403 home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
21404 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
21405 \017\035\027\022\011,
21406 ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
21410 # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
21412 # Synertek used to make ICs, various 6502-based single-board process
21413 # control and hobbyist computers, and assorted peripherals including a
21414 # series of small inexpensive terminals (I think they were one of the
21415 # first to have a "terminal-on-a-keyboard", where the terminal itself
21416 # was only slightly larger than the keyboard).
21418 # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
21419 # was a 40x24 terminal that could connect to a standard TV through a
21420 # video modulator. The KTM-2/80 was the 80-column version (the 2/40
21421 # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
21422 # I have a KTM-2/80 still in working order. The KTM-2s had fully
21423 # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
21424 # ROM and 2 ROMs as character generators. They were incredibly simple,
21425 # and I've never had any problems with mine (witness the fact that mine
21426 # was made in 1981 and is still working great... I've blown the video
21427 # output transistor a couple of times, but it's a 2N2222 :-)
21429 # The KTM-3 (which is what is listed in the terminfo file) was their
21430 # attempt at putting a KTM-2 in a box (and some models came with a
21431 # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
21432 # control and escape sequences are very different. The KTM-3 was always
21433 # real broken, at least according to the folks I've talked to about it.
21435 # The padding in the entry is probably off--these terminals were very
21436 # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
21437 # anyone with any sanity replaced the ROMs with something that provided
21438 # a reasonable subset of VT100 functionality, since the usual ROMs were
21439 # obviously very primitive... oh, you could get an upgraded ROM from
21440 # Synertek for some incredible amount of money, but what hacker with an
21441 # EPROM burner would do that? :)
21443 # Sorry I don't have any contact info; I believe they were located in
21444 # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
21445 # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
21446 # business these days.
21449 # Tested, seems to work fine with vi.
21450 synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
21453 clear=^Z, cub1=^H, cuf1=^L,
21454 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
21456 #### Tab Office Products
21458 # TAB Products Co. - Palo Alto, California
21459 # Electronic Office Products,
21460 # 1451 California Avenue 94304
21462 # I think they're out of business.
21465 # The tab 132 uses xon/xoff, so no padding needed.
21466 # <smkx>/<rmkx> have nothing to do with arrow keys.
21467 # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
21468 # Seems to be no way to get rid of status line.
21469 # The manual for this puppy was dated June 1981. It claims to be VT52-
21470 # compatible but looks more vt100-like.
21471 tab132|tab|tab132-15|tab 132/15,
21473 OTdN@, cols#80, lines#24, lm#96,
21474 cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
21475 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
21476 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
21478 tab132-w|tab132 in wide mode,
21480 is2=\E[?7h\E[?3h\E[?5l, use=tab132,
21481 tab132-rv|tab132 in reverse-video mode,
21482 is2=\E[?7h\E[?3l\E[?5h, use=tab132,
21483 tab132-w-rv|tab132 in reverse-video/wide mode,
21484 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
21489 # Research Incorporated
21490 # 6425 Flying Cloud Drive
21491 # Eden Prairie, MN 55344
21492 # Vox: (612)-941-3300
21494 # The Teleray terminals were all discontinued in 1992-93. RI still services
21495 # and repairs these beasts, but no longer manufactures them. The Teleray
21496 # people believe that all the types listed below are very rare now (1995).
21497 # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
21498 # Model 100) that were ANSI-compatible.
21500 # Note two things called "teleray". Reorder should move the common one
21501 # to the front if you have either. A dumb teleray with the cursor stuck
21502 # on the bottom and no obvious model number is probably a 3700.
21505 t3700|dumb teleray 3700,
21508 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
21509 t3800|teleray 3800 series,
21511 cols#80, it#8, lines#24,
21512 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21513 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
21514 home=\EH, ht=^I, ind=\n, ll=\EY7\s,
21515 t1061|teleray|teleray 1061,
21516 OTbs, am, km, xhp, xt,
21517 cols#80, it#8, lines#24, xmc#1,
21518 bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
21519 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
21520 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
21521 ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>,
21522 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
21523 \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
21524 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
21525 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
21527 t1061f|teleray 1061 with fast PROMs,
21528 dl1=\EM, il1=\EL, ip@, use=t1061,
21529 # "Teleray Arpa Special", officially designated as
21530 # "Teleray Arpa network model 10" with "Special feature 720".
21531 # This is the new (1981) fast microcode updating the older "arpa" proms
21532 # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
21533 # converts the keypad to programmable function keys, and has other goodies.
21534 # Standout mode is still broken (magic cookie, etc) so is suppressed as no
21535 # programs handle such lossage properly.
21536 # Note: this is NOT the old termcap's "t1061f with fast proms."
21537 # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
21538 # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
21539 t10|teleray 10 special,
21541 cols#80, it#8, lines#24, xmc#2,
21542 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
21543 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
21544 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
21545 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
21547 # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
21548 # back/forth words. Put the function keys (f1-f10) where they can be
21549 # found, and turn off the other magic keys along the top row, except
21550 # for line/local. Do the magic appropriate to make the page shifts work.
21551 # Also toggle ^S/^Q for those of us who use Emacs.
21553 am, da, db, mir, xhp, xt,
21555 bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
21556 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
21557 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
21558 ind=\n, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
21559 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
21560 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
21561 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
21562 smso=\E[7m, smul=\E[4m,
21564 #### Texas Instruments (ti)
21567 # The Silent 700 was so called because it was built around a quiet thermal
21568 # printer. It was portable, equipped with an acoustic coupler, and pretty
21569 # neat for its day.
21570 ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
21573 bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
21576 # Texas Instruments 916 VDT 7 bit control mode
21578 ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
21580 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
21581 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
21582 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
21583 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
21584 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
21585 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
21586 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
21587 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
21588 kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~,
21589 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
21590 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
21591 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
21592 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
21593 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
21596 # Texas Instruments 916 VDT 8 bit control mode
21598 ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
21599 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
21600 kcuu1=\233A, kdch1=\233P, kent=\n, kf1=\23317~,
21601 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
21602 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
21603 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
21604 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
21606 # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
21608 ti916-132|Texas Instruments 916 VDT vt220 132 column,
21609 cols#132, use=ti916,
21611 # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
21613 ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
21614 cols#132, use=ti916-8,
21615 ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
21617 cols#80, it#8, lines#24,
21618 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
21619 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
21620 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
21621 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
21622 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
21623 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21624 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
21625 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
21626 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
21627 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
21628 smul=\E[4m, tbc=\E[3g,
21629 ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
21631 cols#80, it#8, lines#24,
21632 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
21633 clear=\E[2J\E[H, cnorm=\E[?25h, cr=\r,
21634 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
21635 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
21636 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
21637 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21638 kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
21639 kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
21640 kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
21641 rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
21642 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
21643 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
21644 cols#132, use=ti924,
21645 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
21646 cols#132, use=ti924-8,
21647 ti931|Texas Instruments 931 VDT,
21650 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED,
21651 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
21652 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
21653 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
21654 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
21655 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
21656 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
21657 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
21658 sgr0=\E4@, smso=\E4A, smul=\E4D,
21659 ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
21660 csr@, ind=\E[1S, ri=\E[1T, use=ti924,
21661 # (ti926-8: I corrected this from the broken SCO entry -- esr)
21662 ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
21663 csr@, ind=\2331S, ri=\2331T, use=ti924-8,
21664 ti_ansi|basic entry for ti928,
21665 am, bce, eo, xenl, xon,
21666 colors#8, cols#80, it#8, lines#25, pairs#64,
21667 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
21668 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
21669 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
21670 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
21671 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
21672 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
21673 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
21674 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
21675 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
21676 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
21677 smso=\E[7m, smul=\E[4m,
21679 # 928 VDT 7 bit control mode
21681 ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
21682 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
21683 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
21684 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
21685 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
21686 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
21688 # 928 VDT 8 bit control mode
21690 ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
21691 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
21692 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
21693 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
21694 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
21695 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
21696 kpp=\233T, kprt=\23335~, use=ti_ansi,
21701 # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
21702 # had just <smso>=\EG6 which I think means standout was supposed to be
21703 # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
21704 # <invis> might work-- esr)
21705 zen30|z30|zentec 30,
21708 bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
21709 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
21710 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
21711 il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
21712 smul@, use=adm+sgr,
21713 # (zen50: this had extension capabilities
21714 # :BS=^U:CL=^V:CR=^B:
21715 # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
21716 # which were also in the original entry -- esr)
21717 # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
21718 zen50|z50|zentec zephyr,
21720 cols#80, lines#24, xmc#1,
21721 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
21722 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
21723 invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
21724 rmul@, smul@, use=adm+sgr,
21726 # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
21727 cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
21730 blink=\EM", clear=\EH\EJ, cnorm=\EP,
21731 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n,
21732 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
21733 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
21734 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
21735 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
21736 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
21737 smso=\EM$, smul=\EM0,
21739 ######## OBSOLETE UNIX CONSOLES
21742 #### Apollo consoles
21744 # Apollo got bought by Hewlett-Packard. The Apollo workstations are
21745 # labeled HP700s now.
21748 # From: Gary Darland <goodmanc@garnet.berkeley.edu>
21749 apollo|apollo console,
21752 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
21753 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
21754 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
21755 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
21756 smso=\ES, smul=\EU, vpa=\EO+\s,
21758 # We don't know whether or not the apollo guys replicated DEC's firmware bug
21759 # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
21760 # both these capabilities.
21761 apollo_15P|apollo 15 inch display,
21762 rmir@, smir@, use=vt132,
21763 apollo_19L|apollo 19 inch display,
21764 rmir@, smir@, use=vt132,
21765 apollo_color|apollo color display,
21766 rmir@, smir@, use=vt132,
21770 # This actually describes the generic SVr4 display driver for Intel boxes.
21771 # The <dim=\E[2m> isn't documented and therefore may not be reliable.
21772 # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
21773 att6386|at386|386at|AT&T WGS 6386 console,
21775 cols#80, it#8, lines#25,
21776 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
21777 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
21778 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub=\E[%p1%dD,
21779 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
21780 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
21781 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
21782 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
21783 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
21784 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
21785 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
21786 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
21787 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
21788 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
21789 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
21790 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
21791 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
21793 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
21794 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
21795 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
21796 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
21797 # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
21798 pc6300plus|AT&T 6300 plus,
21801 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
21802 clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H, cud1=\E[B,
21803 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
21804 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
21805 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n,
21806 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
21807 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
21808 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
21809 nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
21810 smso=\E[7m, smul=\E[4m, tbc=\E[3g,
21812 # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
21814 # I have a UNIX PC which I use as a terminal attached to my Linux PC.
21815 # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
21816 # is broken. All the special key sequences are broken, making it unusable
21817 # with Emacs. The problem stems from the following:
21819 # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
21820 # keypad!), loadable fonts, and strange highlighting modes ("dithered"
21821 # half-intensity, "smeared" bold, and real strike-out, for example.) It also
21822 # uses resizable terminal windows, but the bundled terminal program always
21823 # uses an 80x24 window (and doesn't support seem to support a 132-column
21826 # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
21827 # library which was a superset of SVr3.5 curses (called tam, for "terminal
21828 # access method".) tam includes support for real, overlapping windows,
21829 # onscreen function key labels, and bitmap graphics. But since the primary
21830 # user interface on the UNIX PC was a GUI program (ua, for "user
21831 # assistant",) and remote administration was considered important for the
21832 # machine, tam also supported VT100-compatible terminals attached to the
21833 # serial port or used across the StarLan network. To simulate the extra keys
21834 # not present on a VT100, users could press ESC and a two-letter sequence,
21835 # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
21836 # however, were not the same as those sent by the actual Undo key. The
21837 # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
21838 # (If you're interested in adding some of the tam calls to ncurses, btw, I
21839 # have the full documentation and several programs which use tam. It also
21840 # used an extended terminfo format to describe key sequences, special
21841 # highlighting modes, etc.)
21843 # KEYS: This means that ncurses would quite painful on the UNIX PC, since
21844 # there are two sequences for every key-modifier combination (local keyboard
21845 # sequence and remote "VT100" sequence.) But I doubt many people are trying
21846 # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
21847 # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
21848 # seem to have been built from the manual describing the VT100 sequences.
21849 # This means it doesn't work for a real live UNIX PC.
21851 # FONTS: The UNIX PC also has a strange interpretation of "alternate
21852 # character set". Rather than the VT100 graphics you might expect, it allows
21853 # up to 8 custom fonts to be loaded at any given time. This means that
21854 # programs expecting VT100 graphics will usually be disappointed. For this
21855 # reason I have disabled the smacs/rmacs sequences, but they could easily be
21856 # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
21857 # manpage), should you wish to do so:
21859 # SGR10 - Select font 0 - ESC [ 10 m or SO
21860 # SGR11 - Select font 1 - ESC [ 11 m or SI
21861 # SGR12 - Select font 2 - ESC [ 12 m
21863 # SGR17 - Select font 7 - ESC [ 17 m
21865 # Graphics for line drawing are not reliably found at *any* character
21866 # location because the UNIX PC has dynamically reloadable fonts. I use font
21867 # 0 for regular text and font 1 for italics, but this is by no means
21868 # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
21870 # MISC: The cursor visible/cursor invisible sequences were swapped in the
21871 # distributed terminfo.
21873 # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
21874 # the UNIX PC terminfo entry. The modified version works great with Lynx,
21875 # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
21876 # attached by serial cable. In Emacs, even the Undo key works, and many
21877 # applications can now use the F1-F8 keys.
21880 # Terminfo entry for the AT&T Unix PC 7300
21881 # from escape(7) in Unix PC 7300 Manual.
21882 # Somewhat similar to a vt100-am (but different enough
21883 # to redo this from scratch.)
21885 # /***************************************************************
21887 # * FONT LOADING PROGRAM FOR THE UNIX PC
21889 # * This routine loads a font defined in the file ALTFONT
21890 # * into font memory slot #1. Once the font has been loaded,
21891 # * it can be used as an alternative character set.
21893 # * The call to ioctl with the argument WIOCLFONT is the key
21894 # * to this routine. For more information, see window(7) in
21895 # * the PC 7300 documentation.
21896 # ***************************************************************/
21897 # #include <string.h> /* needed for strcpy call */
21898 # #include <sys/window.h> /* needed for ioctl call */
21899 # #define FNSIZE 60 /* font name size */
21900 # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
21902 # * The file /usr/lib/wfont/special.8.ft comes with the
21903 # * standard PC software. It defines a graphics character set
21904 # * similar to that of the Teletype 5425 terminal. To view
21905 # * this or other fonts in /usr/lib/wfont, use the command
21906 # * cfont <filename>. For further information on fonts see
21907 # * cfont(1) in the PC 7300 documentation.
21910 # struct altfdata /* structure for alt font data */
21912 # short altf_slot; /* memory slot number */
21913 # char altf_name[FNSIZE]; /* font name (file name) */
21917 # int wd; /* window in which altfont will be */
21918 # struct altfdata altf;
21919 # altf.altf_slot=1;
21920 # strcpy(altf.altf_name,ALTFONT);
21921 # for (wd =1; wd < 12; wd++) {
21922 # ioctl(wd, WIOCLFONT,&altf);
21926 # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
21927 # they're confirmed by the man page for the System V display---esr)
21929 att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
21931 cols#80, it#8, lines#24,
21932 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
21933 clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD,
21934 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
21935 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
21936 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
21937 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
21938 il1=\E[L, ind=\n, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
21939 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
21940 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
21941 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
21942 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
21943 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
21944 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
21945 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
21946 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
21947 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
21948 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
21949 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
21950 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
21951 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
21952 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
21953 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
21956 #### Convergent Technology
21958 # Burroughs bought Convergent shortly before it merged with Univac.
21959 # CTOS is (I believe) dead. Probably the aws is too (this entry dates
21960 # from 1991 or earlier).
21963 # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
21964 # (aws: removed unknown :dn=^K: -- esr)
21965 aws|Convergent Technologies AWS workstation under UTX and Xenix,
21967 OTug#0, cols#80, lines#28, xmc#0,
21968 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=,
21969 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
21970 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
21971 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
21972 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
21973 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
21975 awsc|Convergent Technologies AWS workstation under CTOS,
21977 OTug#0, cols#80, lines#24, xmc#0,
21978 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
21979 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
21980 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
21981 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
21987 # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
21988 # The digital uVax II's had a graphic display called a qdss. It was
21989 # supposed to be a high performance graphic accelerator, but it was
21990 # late to market and barely appeared before faster dumb frame buffers
21991 # appeared. I have only used this display while running X11. However,
21992 # during bootup, it was in text mode, and probably had a terminal emulator
21993 # within it. And that is what your termcap entry is for. In graphics
21994 # mode the screen size is 1024x864 pixels.
21995 qdss|qdcons|qdss glass tty,
21997 cols#128, lines#57,
21998 clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L,
21999 cup=\E=%p1%c%p2%c, cuu1=^K,
22001 #### Fortune Systems consoles
22003 # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
22004 # in their day; I (esr) used one myself for a year or so around 1984.
22005 # They had no graphics, though, and couldn't compete against Suns and
22009 # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
22010 # (This had extension capabilities
22011 # :rv=\EH:re=\EI:rg=0:GG=0:\
22012 # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
22013 # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
22014 # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
22015 # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
22016 # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
22017 # to force both magic cookie glitches off. Once upon a time, I
22018 # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
22019 # function keys; thus the "Al" value for HM was certainly an error. I renamed
22020 # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
22021 # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
22022 # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
22023 # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
22024 fos|fortune|Fortune system,
22027 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
22028 clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>,
22029 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
22030 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
22031 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
22032 ich1=\034Q$<5>, il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H,
22033 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
22034 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
22035 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
22036 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH,
22037 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
22038 smso=^\H`, smul=^\HP,
22040 #### Masscomp consoles
22042 # Masscomp has gone out of business. Their product line was purchased by
22043 # comany in Georgia (US) called "XS International", parts and service may
22044 # still be available through them.
22047 # (masscomp: ":MT:" changed to ":km:"; -- esr)
22048 masscomp|masscomp workstation console,
22050 cols#80, it#8, lines#24,
22051 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
22052 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22053 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
22054 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
22055 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
22056 masscomp1|masscomp large screen version 1,
22057 cols#104, lines#36, use=masscomp,
22058 masscomp2|masscomp large screen version 2,
22059 cols#64, lines#21, use=masscomp,
22064 # OSF/1 1.1 Snapshot 2
22065 pmcons|pmconsole|PMAX console,
22067 cols#128, lines#57,
22068 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I,
22069 ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
22070 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
22072 #### Other consoles
22073 # The following is a version of the ibm-pc entry distributed with PC/IX,
22074 # (Interactive Systems' System 3 for the Big Blue), modified by Richard
22075 # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
22076 # (the former is untrue, and the latter failed under UCB/man); standout and
22077 # underline modes have been added. Note: this entry describes the "native"
22078 # capabilities of the PC monochrome display, without ANY emulation; most
22079 # communications packages (but NOT PC/IX connect) do some kind of emulation.
22080 pcix|PC/IX console,
22083 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
22084 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
22085 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
22088 # (ibmpcx: this entry used to be known as ibmx.
22089 # It formerly included the following extension capabilities:
22090 # :GC=b:GL=v:GR=t:RT=^J:\
22091 # :GH=\E[196g:GV=\E[179g:\
22092 # :GU=\E[193g:GD=\E[194g:\
22093 # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
22094 # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
22095 # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
22096 # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
22097 # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
22098 # what was there before. -- esr)
22099 ibmpcx|xenix|ibmx|IBM PC xenix console display,
22102 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
22103 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22104 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
22105 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
22106 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
22107 kpp=\E[Z, use=klone+acs, use=klone+sgr8,
22109 ######## OTHER OBSOLETE TYPES
22111 # These terminals are *long* dead -- these entries are retained for
22112 # historical interest only.
22115 #### Obsolete non-ANSI software emulations
22118 # CTRM terminal emulator
22119 # 1. underlining is not allowed with colors: first, is is simulated by
22120 # black on white, second, it disables background color manipulations.
22121 # 2. BLINKING, REVERSE and BOLD are allowed with colors,
22122 # so we have to save their status in the static registers A, B and H
22123 # respectively, to be able to restore them when color changes
22124 # (because any color change turns off ALL attributes)
22125 # 3. <bold> and <rev> sequences alternate modes,
22126 # rather than simply entering them. Thus we have to check the
22127 # static register B and H to determine the status, before sending the
22129 # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
22130 # and then reset colors
22131 # 5. implementation of the protect mode would badly penalize the performance.
22132 # we would have to use \E&bn sequence to turn off colors (as well as all
22133 # other attributes), and keep the status of protect mode in yet another
22134 # static variable. If someone really needs this mode, they would have to
22135 # create another terminfo entry.
22136 # 6. original color-pair is white on black.
22137 # store the information about colors into static registers
22138 # 7. set foreground color. it performs the following steps.
22139 # 1) turn off all attributes
22140 # 2) turn on the background and video attributes that have been turned
22141 # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
22142 # 3) turn on foreground attributes
22143 # 4) store information about foreground into U,V,W static registers
22144 # 8. turn on background: similar to turn on foreground above
22145 ctrm|C terminal emulator,
22147 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
22148 pairs#63, pb#19200, vt#6,
22149 bel=^G, blink=\E&dA%{1}%PA,
22150 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
22151 clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22152 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
22153 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
22154 il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
22155 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
22156 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
22157 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
22158 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
22160 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
22161 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
22162 \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
22163 %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
22164 %{4}%&%t\E&br%{1}%e%{0}%;%PX,
22165 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
22166 \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
22167 %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
22168 %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
22169 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
22170 %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
22172 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
22173 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
22175 # gs6300 - can't use blue foreground, it clashes with underline;
22176 # it's simulated with cyan
22177 # Bug: The <op> capability probably resets attributes.
22178 # (gs6300: commented out <rmln> (no <smln>) --esr)
22179 gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
22180 am, bce, msgr, xon,
22181 colors#8, cols#80, it#8, lines#24, pairs#63,
22182 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
22184 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
22185 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
22186 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
22187 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
22188 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
22189 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
22190 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
22191 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
22192 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
22193 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
22194 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
22195 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
22196 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
22198 # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
22199 # MS-Kermit with Heath-19 emulation mode enabled
22200 # (h19k: changed ":pt@:" to ":it@"
22201 h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
22206 # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
22207 # Software (formerly Peripherals Computers & Supplies, Inc) of
22208 # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
22209 # also be reached at support@synergy.com.
22210 versaterm|versaterm vt100 emulator for the Macintosh,
22212 cols#80, it#8, lines#24,
22213 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
22214 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
22215 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
22216 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
22217 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
22218 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
22219 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
22220 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
22221 kf3=\EOR, kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>,
22222 rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
22223 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
22224 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
22227 # From: Rick Thomas <ihnp4!btlunix!rbt>
22228 # (xtalk: I added <rmam>/<smam> based on the init string.
22229 xtalk|IBM PC with xtalk communication program (versions up to 3.4),
22230 am, mir, msgr, xon,
22231 cols#80, it#8, lines#24, vt#3, xmc#1,
22232 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
22233 bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
22234 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
22235 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
22236 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
22237 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
22238 il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB,
22239 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
22240 rmkx=\E[?1l\E>, rmso=\E[m\s,
22241 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
22242 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
22243 tbc=\E[3g, use=vt100+fnkeys,
22245 # The official PC terminal emulator program of the AT&T Product Centers.
22246 # Note - insert mode commented out - doesn't seem to work on AT&T PC.
22247 simterm|attpc running simterm,
22250 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
22251 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
22252 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE,
22253 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
22255 #### Daisy wheel printers
22257 # This section collects Diablo, DTC, Xerox, Qume, and other daisy
22258 # wheel terminals. These are now largely obsolete.
22261 # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
22262 diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
22265 cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
22266 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
22267 diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
22269 is2=\r \E9, use=diablo1620,
22270 # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
22271 diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
22272 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
22274 # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
22276 diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
22278 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
22279 diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
22281 # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
22282 # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
22283 # The terminal has tabs, but I'm getting tired of fighting the braindamage.
22284 # If no tab is set or the terminal's in a bad mood, it glitches the screen
22285 # around all of memory. Note that return puts a blank ("a return character")
22286 # in the space the cursor was at, so we use ^P return (and thus ^P newline for
22287 # newline). Note also that if you turn off :pt: and let Unix expand tabs,
22288 # curses won't work (some old BSD versions) because it doesn't clear this bit,
22289 # and cursor addressing sends a tab for row/column 9. What a losing terminal!
22290 # I have been unable to get tabs set in all 96 lines - it always leaves at
22291 # least one line with no tabs in it, and once you tab through that line,
22292 # it completely weirds out.
22293 # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
22296 cols#80, lines#24, lm#96,
22297 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H,
22298 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
22299 dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R,
22300 il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0,
22301 smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
22305 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
22306 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
22307 gsi|mystery gsi terminal,
22310 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
22312 aj830|aj832|aj|anderson jacobson,
22314 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
22316 # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
22317 aj510|Anderson-Jacobson model 510,
22320 clear=^L, cub1=^H, cuf1=\EX,
22321 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
22322 dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
22323 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
22324 kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J,
22325 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
22327 # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
22328 # This is incomplete, but it's a start.
22329 nec5520|nec|spinwriter|nec 5520,
22332 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
22333 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n,
22335 qume5|qume|Qume Sprint 5,
22338 bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
22339 hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
22340 # I suspect the xerox 1720 is the same as the diablo 1620.
22341 xerox1720|x1720|x1750|xerox 1720,
22344 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
22347 #### Miscellaneous obsolete terminals, manufacturers unknown
22349 # If you have any information about these (like, a manufacturer's name,
22350 # and a date on the serial-number plate) please send it!
22352 cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
22355 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
22356 cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
22359 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
22360 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
22361 kf4=\E8, rmso=\Em^C, smso=\Em^L,
22362 cops10|cops|cops-10|cops 10,
22365 bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
22366 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
22367 ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
22369 # (d132: removed duplicate :ic=\E5:,
22370 # merged in capabilities from a BRL entry -- esr)
22371 d132|datagraphix|datagraphix 132a,
22374 bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
22375 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
22376 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H,
22377 kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew,
22378 # The d800 was an early portable terminal from c.1984-85 that looked a lot
22379 # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
22380 # mode (which is what this entry looks like) and several other lesser-known
22383 OTbs, am, da, db, msgr, xhp,
22384 cols#80, it#8, lines#24,
22385 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
22386 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H,
22387 cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
22388 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
22389 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
22390 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
22391 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22392 smacs=\E[1m, smso=\E[7m, smul=\E[4m,
22393 digilog|digilog 333,
22396 bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X,
22398 # The DWK was a terminal manufactured in the Soviet Union c.1986
22399 dwk|dwk-vt|dwk terminal,
22401 cols#80, it#8, lines#24,
22402 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv
22404 bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
22405 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
22406 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=\n, kbs=^?,
22407 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
22408 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
22409 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
22410 kpp=\Eg, nel=\r\n, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
22411 sgr0=\EX, smacs=\EF, smso=\ET,
22412 env230|envision230|envision 230 graphics terminal,
22414 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
22415 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
22417 sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
22418 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
22419 # coupler attached, the whole rig fitting in a suitcase and more or less
22420 # portable. Hot stuff for c.1977 :-) -- esr
22421 ep48|ep4080|execuport 4080,
22424 bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n,
22425 ep40|ep4000|execuport 4000,
22426 cols#136, use=ep4080,
22427 # Adam Thompson <athompso@pangea.ca> tells us:
22428 # Informer series - these are all portable units, resembling older
22429 # automatic bread-baking machines. The terminal looks like a `clamshell'
22430 # design, but isn't. The structure is similar to the Direct terminals,
22431 # but only half the width. The entire unit is only about 10" wide.
22432 # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
22433 # keyboard. All the keys are crammed together, much like some laptop
22434 # PCs today, but perhaps less well organized...all these units have a
22435 # bewildering array of plugs on the back, including a built-in modem.
22436 # The 305 was a color version of the 304; the 306 and 307 were mono and
22437 # color terminals built for IBM bisync protocols.
22438 # From: Paul Leondis <unllab@amber.berkeley.edu>
22439 ifmr|Informer D304,
22442 clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC,
22443 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
22444 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
22446 # Entry largely based on wy60 and has the features of wy60ak.
22447 opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
22448 am, bw, hs, km, mir, msgr, ul, xon,
22449 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
22450 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
22451 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r,
22452 cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
22453 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
22454 ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>,
22455 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n,
22457 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
22458 \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
22460 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
22461 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
22462 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
22463 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
22464 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
22465 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
22466 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
22467 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
22468 pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
22469 pfx=\EZ1%p1%{63}%+%c%p2%s\177,
22470 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
22471 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
22472 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
22473 rs3=\EwG\Ee($<150>,
22474 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
22475 %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
22476 %t%{64}%|%;%?%p7%t%{1}%|%;%c,
22477 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
22478 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
22480 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
22481 uc=\EG8\EG0, use=adm+sgr,
22482 teletec|Teletec Datascreen,
22485 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K,
22487 # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
22488 # This description is for the LANPAR Technologies VISION 3220
22489 # terminal from 1984/85. The function key definitions k0-k5 represent the
22490 # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
22491 # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
22493 # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
22494 # I had a couple of scopes (3221) like this once where I used to work, around
22495 # the 1987 time frame if memory serves me correctly. These scopes were made
22496 # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
22497 # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
22498 # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
22499 # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
22500 # (3221) cost about $1500 each, and one was always broken -- had to be sent
22501 # back to the shop for repairs.
22502 # The only real advantage these scopes had over the VT-240's were:
22503 # 1) They were faster in the Regis display, or at least the ones I did
22504 # 2) They had a handy debugging feature where you could split-screen the
22505 # scope, the graphics would appear on the top, and the REGIS commands would
22506 # appear on the bottom. I don't remember the VT-240s being able to do that.
22507 # I would swear that LANPAR Technologies was in MA someplace, but since I
22508 # don't work at the same place anymore, and those terminals and manuals were
22509 # long since junked, I cannot be any more sure than that.
22511 # (v3220: removed obsolete ":kn#10:",
22512 # I added <rmam>/<smam> based on the init string -- esr)
22513 v3220|LANPAR Vision II model 3220/3221/3222,
22514 OTbs, am, mir, xenl,
22515 cols#80, it#8, lines#24,
22516 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
22517 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
22518 ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
22519 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
22520 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
22521 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
22522 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
22523 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
22524 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
22525 ######## ICH/ICH1 VERSUS RMIR/SMIR
22527 # Some non-curses applications get confused if both ich/ich1 and rmir/smir
22528 # are present; the symptom is doubled characters in an update using insert.
22529 # These applications are technically correct; in both 4.3BSD termcap and
22530 # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
22531 # unless the terminal needs both. To my knowledge, no terminal still in this
22532 # file requires both other than the very obsolete dm2500.
22534 # For ncurses-based applications this is not a problem, as ncurses uses
22535 # one or the other as appropriate but never mixes the two. Therefore we
22536 # have not corrected entries like `linux' and `xterm' that specify both.
22537 # If you see doubled characters from these, use the linux-nic and xterm-nic
22538 # entries that suppress ich/ich1. And upgrade to ncurses!
22541 ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
22543 # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
22544 # ECMA-48 standards are said to be almost identical, but are not the same
22545 # as X3.64 (though for practical purposes they are close supersets of it).
22547 # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
22548 # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
22549 # Coded Character Sets"), include your snail-mail address, and you should
22550 # receive the document in due course. Don't expect an email acknowledgment.
22552 # Related standards include "X3.4-1977: American National Standard Code for
22553 # Information Interchange" (the ASCII standard) and "X3.41.1974:
22554 # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
22555 # American National Standard for Information Interchange." I believe (but
22556 # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
22560 #### VT100/ANSI/ECMA-48
22562 # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
22563 # and ECMA-48 Control Functions for Coded Character Sets.
22565 # Much of the content of this comment is adapted from a table prepared by
22566 # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
22567 # discussion of some terminfo-related issues, and updates to capture ECMA-48
22568 # have been added. Control functions described in ECMA-48 only are tagged
22569 # with * after their names.
22571 # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
22572 # sequences. In the main table, \E stands for an escape (\033) character,
22573 # SPC for space. Pn stands for a single numeric parameter to be inserted
22574 # in decimal ASCII. Ps stands for a list of such parameters separated by
22575 # semicolons. Parameter meanings for most parameterized sequences are
22576 # described in the notes.
22578 # Sequence Sequence Parameter or
22579 # Mnemonic Name Sequence Value Mode terminfo
22580 # -----------------------------------------------------------------------------
22581 # APC Applicatn Program Command \E _ - Delim -
22582 # BEL Bell * ^G - - bel
22583 # BPH Break Permitted Here * \E B - * -
22584 # BS BackSpace * ^H - EF -
22585 # CAN Cancel * ^X - - - (A)
22586 # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
22587 # CCH Cancel Previous Character \E T - - -
22588 # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
22589 # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
22590 # CMD Coding Method Delimiter * \E
22591 # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
22592 # CPL Cursor Preceding Line \E [ Pn F 1 eF -
22593 # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
22594 # CSI Control Sequence Intro \E [ - Intro -
22595 # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
22596 # CUB Cursor Backward \E [ Pn D 1 eF cub
22597 # CUD Cursor Down \E [ Pn B 1 eF cud
22598 # CUF Cursor Forward \E [ Pn C 1 eF cuf
22599 # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
22600 # CUU Cursor Up \E [ Pn A 1 eF cuu
22601 # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
22602 # DA Device Attributes \E [ Pn c 0 - -
22603 # DAQ Define Area Qualification \E [ Ps o 0 - -
22604 # DCH Delete Character \E [ Pn P 1 eF dch
22605 # DCS Device Control String \E P - Delim -
22606 # DL Delete Line \E [ Pn M 1 eF dl
22607 # DLE Data Link Escape * ^P - - -
22608 # DMI Disable Manual Input \E \ - Fs -
22609 # DSR Device Status Report \E [ Ps n 0 - - (I)
22610 # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
22611 # EA Erase in Area \E [ Ps O 0 eF - (J)
22612 # ECH Erase Character \E [ Pn X 1 eF ech
22613 # ED Erase in Display \E [ Ps J 0 eF ed (J)
22614 # EF Erase in Field \E [ Ps N 0 eF -
22615 # EL Erase in Line \E [ Ps K 0 eF el (J)
22616 # EM End of Medium * ^Y - - -
22617 # EMI Enable Manual Input \E b Fs -
22618 # ENQ Enquire ^E - - -
22619 # EOT End Of Transmission ^D - * -
22620 # EPA End of Protected Area \E W - - - (K)
22621 # ESA End of Selected Area \E G - - -
22622 # ESC Escape ^[ - - -
22623 # ETB End Transmission Block ^W - - -
22624 # ETX End of Text ^C - - -
22625 # FF Form Feed ^L - - -
22626 # FNK Function Key * \E [ Pn SPC W - - -
22627 # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
22628 # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
22629 # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
22630 # GSS Graphic Size Selection \E [ Pn SPC C none FE -
22631 # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
22632 # HPB Char Position Backward \E [ j 1 FE -
22633 # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
22634 # HT Horizontal Tab * ^I - FE - (N)
22635 # HTJ Horz Tab w/Justification \E I - FE -
22636 # HTS Horizontal Tab Set \E H - FE hts
22637 # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
22638 # ICH Insert Character \E [ Pn @ 1 eF ich
22639 # IDCS ID Device Control String \E [ SPC O - * -
22640 # IGS ID Graphic Subrepertoire \E [ SPC M - * -
22641 # IL Insert Line \E [ Pn L 1 eF il
22642 # IND Index \E D - FE -
22643 # INT Interrupt \E a - Fs -
22644 # JFY Justify \E [ Ps SPC F 0 FE -
22645 # IS1 Info Separator #1 * ^_ - * -
22646 # IS2 Info Separator #1 * ^^ - * -
22647 # IS3 Info Separator #1 * ^] - * -
22648 # IS4 Info Separator #1 * ^\ - * -
22649 # LF Line Feed ^J - - -
22650 # LS1R Locking Shift Right 1 * \E ~ - - -
22651 # LS2 Locking Shift 2 * \E n - - -
22652 # LS2R Locking Shift Right 2 * \E } - - -
22653 # LS3 Locking Shift 3 * \E o - - -
22654 # LS3R Locking Shift Right 3 * \E | - - -
22655 # MC Media Copy \E [ Ps i 0 - - (S)
22656 # MW Message Waiting \E U - - -
22657 # NAK Negative Acknowledge * ^U - * -
22658 # NBH No Break Here * \E C - - -
22659 # NEL Next Line \E E - FE nel (D)
22660 # NP Next Page \E [ Pn U 1 eF -
22661 # NUL Null * ^@ - - -
22662 # OSC Operating System Command \E ] - Delim -
22663 # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
22664 # PFS Page Format Selection * \E Pn SPC J 0 - -
22665 # PLD Partial Line Down \E K - FE - (T)
22666 # PLU Partial Line Up \E L - FE - (U)
22667 # PM Privacy Message \E ^ - Delim -
22668 # PP Preceding Page \E [ Pn V 1 eF -
22669 # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
22670 # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
22671 # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
22672 # PTX Parallel Texts * \E [ \ - - -
22673 # PU1 Private Use 1 \E Q - - -
22674 # PU2 Private Use 2 \E R - - -
22675 # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
22676 # REP Repeat Char or Control \E [ Pn b 1 - rep
22677 # RI Reverse Index \E M - FE - (V)
22678 # RIS Reset to Initial State \E c - Fs -
22679 # RM Reset Mode * \E [ Ps l - - - (W)
22680 # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
22681 # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
22682 # SCI Single-Char Introducer \E Z - - -
22683 # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
22684 # SCS Set Char. Spacing * \E [ Pn SPC g - - -
22685 # SD Scroll Down \E [ Pn T 1 eF rin
22686 # SDS Start Directed String * \E [ Pn ] 1 - -
22687 # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
22688 # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
22689 # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
22690 # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
22691 # SI Shift In ^O - - - (P)
22692 # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
22693 # SL Scroll Left \E [ Pn SPC @ 1 eF -
22694 # SLH Set Line Home * \E [ Pn SPC U - - -
22695 # SLL Set Line Limit * \E [ Pn SPC V - - -
22696 # SLS Set Line Spacing * \E [ Pn SPC h - - -
22697 # SM Select Mode \E [ Ps h none - - (W)
22698 # SO Shift Out ^N - - - (Q)
22699 # SOH Start Of Heading * ^A - - -
22700 # SOS Start of String * \E X - - -
22701 # SPA Start of Protected Area \E V - - - (Z)
22702 # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
22703 # SPH Set Page Home * \E [ Ps SPC G - - -
22704 # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
22705 # SPL Set Page Limit * \E [ Ps SPC j - - -
22706 # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
22707 # SR Scroll Right \E [ Pn SPC A 1 eF -
22708 # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
22709 # SRS Start Reversed String * \E [ Ps [ 0 - -
22710 # SSA Start of Selected Area \E F - - -
22711 # SSU Select Size Unit * \E [ Pn SPC I 0 - -
22712 # SSW Set Space Width * \E [ Pn SPC [ none - -
22713 # SS2 Single Shift 2 (G2 set) \E N - Intro -
22714 # SS3 Single Shift 3 (G3 set) \E O - Intro -
22715 # ST String Terminator \E \ - Delim -
22716 # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
22717 # STS Set Transmit State \E S - - -
22718 # STX Start pf Text * ^B - - -
22719 # SU Scroll Up \E [ Pn S 1 eF indn
22720 # SUB Substitute * ^Z - - -
22721 # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
22722 # SYN Synchronous Idle * ^F - - -
22723 # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
22724 # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
22725 # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
22726 # TBC Tab Clear \E [ Ps g 0 FE tbc
22727 # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
22728 # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
22729 # TSS Thin Space Specification \E [ Pn SC E none FE -
22730 # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
22731 # VPB Line Position Backward * \E [ Pn k 1 FE -
22732 # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
22733 # VT Vertical Tabulation * ^K - FE -
22734 # VTS Vertical Tabulation Set \E J - FE -
22736 # ---------------------------------------------------------------------------
22740 # Some control characters are listed in the ECMA-48 standard without
22741 # being assigned functions relevant to terminal control there (they
22742 # referred to other standards such as ISO 1745 or ECMA-35). They are listed
22743 # here anyway for completeness.
22745 # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
22747 # (B) There seems to be some confusion abroad between CHA and HPA. Most
22748 # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
22749 # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
22750 # preserved the CHA abbreviation.
22752 # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
22753 # Occasionally (as on, for example, certain HP terminals) this has the HTJ
22754 # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
22755 # CHT abbreviation.
22757 # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
22759 # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
22762 # (F) CTC parameter values:
22763 # 0 = set char tab,
22764 # 1 = set line tab,
22765 # 2 = clear char tab,
22766 # 3 = clear line tab,
22767 # 4 = clear all char tabs on current line,
22768 # 5 = clear all char tabs,
22769 # 6 = clear all line tabs.
22771 # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
22772 # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
22773 # Position Absolute" but retains the HVP abbreviation.
22775 # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
22778 # (I) DSR parameter values:
22781 # 2 = busy, will send DSR later,
22783 # 4 = malfunction, will send DSR later,
22785 # 6 = request CPR response.
22787 # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
22788 # 0 = clear to end,
22789 # 1 = clear from beginning,
22792 # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
22794 # (L) The GSM parameters are vertical and horizontal parameters to scale by.
22796 # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
22797 # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
22798 # Position Relative" but retains the HPR abbreviation.
22800 # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
22803 # (O) SGR parameter values:
22804 # 0 = default mode (attributes off),
22811 # 7 = reverse video,
22813 # 9 = crossed-out (marked for deletion),
22814 # 10 = primary font,
22815 # 10 + n (n in 1..9) = nth alternative font,
22817 # 21 = double underline,
22822 # 26 = proportional spacing,
22834 # 38 = set fg color as in CCITT T.416,
22835 # 39 = set default fg color,
22844 # 48 = set bg color as in CCITT T.416,
22845 # 49 = set default bg color,
22846 # 50 = turn off 26,
22850 # 54 = turn off 51 & 52,
22851 # 55 = not overlined,
22852 # 56-59 = reserved,
22853 # 61-65 = variable highlights for ideograms.
22855 # (P) SI is also called LSO, Locking Shift Zero.
22857 # (Q) SI is also called LS1, Locking Shift One.
22859 # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
22860 # use CUD for this function and ignore VPR. ECMA calls it `Line Position
22861 # Absolute' but retains the VPA abbreviation.
22863 # (S) MC parameters:
22864 # 0 = start xfer to primary aux device,
22865 # 1 = start xfer from primary aux device,
22866 # 2 = start xfer to secondary aux device,
22867 # 3 = start xfer from secondary aux device,
22868 # 4 = stop relay to primary aux device,
22869 # 5 = start relay to primary aux device,
22870 # 6 = stop relay to secondary aux device,
22871 # 7 = start relay to secondary aux device.
22873 # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
22876 # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU
22879 # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
22881 # (W) RM/SM modes are as follows:
22882 # 1 = Guarded Area Transfer Mode (GATM),
22883 # 2 = Keyboard Action Mode (KAM),
22884 # 3 = Control Representation Mode (CRM),
22885 # 4 = Insertion Replacement Mode (IRM),
22886 # 5 = Status Report Transfer Mode (SRTM),
22887 # 6 = Erasure Mode (ERM),
22888 # 7 = Line Editing Mode (LEM),
22889 # 8 = Bi-Directional Support Mode (BDSM),
22890 # 9 = Device Component Select Mode (DCSM),
22891 # 10 = Character Editing Mode (HEM),
22892 # 11 = Positioning Unit Mode (PUM),
22893 # 12 = Send/Receive Mode (SRM),
22894 # 13 = Format Effector Action Mode (FEAM),
22895 # 14 = Format Effector Transfer Mode (FETM),
22896 # 15 = Multiple Area Transfer Mode (MATM),
22897 # 16 = Transfer Termination Mode (TTM),
22898 # 17 = Selected Area Transfer Mode (SATM),
22899 # 18 = Tabulation Stop Mode (TSM),
22900 # 19 = Editing Boundary Mode (EBM),
22901 # 20 = Line Feed New Line Mode (LF/NL),
22902 # 21 = Graphic Rendition Combination Mode (GRCM),
22903 # 22 = Zero Default Mode (ZDM).
22905 # The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
22906 # but are listed here for reference.
22908 # (X) Select Alternate Presentation Variants is used only for non-Latin
22911 # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
22913 # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
22916 # ---------------------------------------------------------------------------
22920 # Intro an Introducer of some kind of defined sequence; the normal 7-bit
22921 # X3.64 Control Sequence Introducer is the two characters "Escape ["
22923 # Delim a Delimiter
22925 # x/y identifies a character by position in the ASCII table (column/row)
22927 # eF editor function (see explanation)
22929 # FE format effector (see explanation)
22931 # F is a Final character in
22932 # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
22933 # a control sequence (F from 4/0 to 7/14)
22935 # Gs is a graphic character appearing in strings (Gs ranges from
22936 # 2/0 to 7/14) in the ASCII table
22938 # Ce is a control represented as a single bit combination in the C1 set
22939 # of controls in an 8-bit character set
22941 # C0 the familiar set of 7-bit ASCII control characters
22943 # C1 roughly, the set of control chars available only in 8-bit systems.
22944 # This is too complicated to explain fully here, so read Jim Fleming's
22945 # article in the February 1983 BYTE, especially pages 214 through 224.
22947 # Fe is a Final character of a 2-character Escape sequence that has an
22948 # equivalent representation in an 8-bit environment as a Ce-type
22949 # (Fe ranges from 4/0 to 5/15)
22951 # Fs is a Final character of a 2-character Escape sequence that is
22952 # standardized internationally with identical representation in 7-bit
22953 # and 8-bit environments and is independent of the currently
22954 # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
22956 # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
22959 # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
22962 # Pn is a numeric parameter in a control sequence, a string of zero or
22963 # more characters ranging from 3/0 to 3/9 in the ASCII table
22965 # Ps is a variable number of selective parameters in a control sequence
22966 # with each selective parameter separated from the other by the code
22967 # 3/11 (which usually represents a semicolon); Ps ranges from
22968 # 3/0 to 3/9 and includes 3/11
22970 # * Not relevant to terminal control, listed for completeness only.
22972 # Format Effectors versus Editor Functions
22974 # A format effector specifies how following output is to be displayed.
22975 # An editor function allows you to modify the display. Informally
22976 # format effectors may be destructive; format effectors should not be.
22978 # For instance, a format effector that moves the "active position" (the
22979 # cursor or equivalent) one space to the left would be useful when you want to
22980 # create an overstrike, a compound character made of two standard characters
22981 # overlaid. Control-H, the Backspace character, is actually supposed to be a
22982 # format effector, so you can do this. But many systems use it in a
22983 # nonstandard fashion, as an editor function, deleting the character to the
22984 # left of the cursor and moving the cursor left. When Control-H is assumed to
22985 # be an editor function, you cannot predict whether its use will create an
22986 # overstrike unless you also know whether the output device is in an "insert
22987 # mode" or an "overwrite mode". When Control-H is used as a format effector,
22988 # its effect can always be predicted. The familiar characters carriage
22989 # return, linefeed, formfeed, etc., are defined as format effectors.
22991 # NOTES ON THE DEC VT100 IMPLEMENTATION
22993 # Control sequences implemented in the VT100 are as follows:
22995 # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
22996 # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
22998 # plus several private DEC commands.
23000 # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
23002 # Erase from cursor to end of line Esc [ 0 K or Esc [ K
23003 # Erase from beginning of line to cursor Esc [ 1 K
23004 # Erase line containing cursor Esc [ 2 K
23005 # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
23006 # Erase from beginning of screen to cursor Esc [ 1 J
23007 # Erase entire screen Esc [ 2 J
23009 # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
23010 # Esc [ 2 J, but this is wrong; the default is 0.
23012 # The VT100 responds to receiving the DA (Device Attributes) control
23014 # Esc [ c (or Esc [ 0 c)
23016 # by transmitting the sequence
23020 # where Ps is a character that describes installed options.
23022 # The VT100's cursor location can be read with the DSR (Device Status
23027 # The VT100 reports by transmitting the CPR sequence
23031 # where Pl is the line number and Pc is the column number (in decimal).
23033 # The specification for the DEC VT100 is document EK-VT100-UG-003.
23037 # Here is a description of the color and attribute controls supported in the
23038 # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
23039 # terminal emulators for Intel boxes obey these. They are a proper subset
23040 # of the ECMA-48 escapes.
23042 # 0 all attributes off
23043 # 1 foreground bright
23045 # 5 blink on/background bright (not reliable with brown)
23047 # 8 set blank (non-display)
23048 # 10 set primary font
23049 # 11 set first alternate font (on PCs, display ROM characters 1-31)
23050 # 12 set second alternate font (on PCs, display IBM high-half chars)
23052 # Color attribute sets
23053 # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
23054 # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
23055 # Bright black becomes gray. Bright brown becomes yellow,
23056 # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
23058 # * If the 5 attribute is on and you set a background color (40-47) it is
23059 # supposed to enable bright background.
23061 # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
23062 # when you try to set a "bright brown" (yellow) background with attribute
23063 # 5 (you get a blinking yellow foreground instead). A few displays
23064 # (including the System V console) support an attribute 6 that undoes this
23065 # braindamage (this is required by iBCS2).
23067 # * Some older versions of ANSI.SYS have a bug that causes thems to require
23068 # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
23071 #### Intel Binary Compatibility Standard
23073 # For comparison, here are the capabilities implied by the Intel Binary
23074 # Compatibility Standard for UNIX systems (Intel order number 468366-001).
23075 # These recommendations are optional. IBCS2 allows the leading escape to
23076 # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
23077 # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
23078 # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
23079 # terminfo entry are followed with the corresponding capability in parens:
23081 # CSI <n>k disable (n=0) or enable (n=1) keyclick
23082 # CSI 2h lock keyboard
23083 # CSI 2i send screen as input
23084 # CSI 2l unlock keyboard
23085 # CSI 6m enable background color intensity
23086 # CSI <0-2>c reserved
23087 # CSI <0-59>m select graphic rendition
23088 # CSI <n>;<m>H (cup) cursor to line n and column m
23089 # CSI <n>;<m>f cursor to line n and column m
23090 # CSI <n>@ (ich) insert characters
23091 # CSI <n>A (cuu) cursor up n lines
23092 # CSI <n>B (cud) cursor down n lines
23093 # CSI <n>C (cuu) cursor right n characters
23094 # CSI <n>D (cud) cursor left n characters
23095 # CSI <n>E cursor down n lines and in first column
23096 # CSI <n>F cursor up n lines and in first column
23097 # CSI <n>G (hpa) position cursor at column n-1
23098 # CSI <n>J (ed) erase in display
23099 # CSI <n>K (el) erase in line
23100 # CSI <n>L (il) insert line(s)
23101 # CSI <n>P (dch) delete characters
23102 # CSI <n>S (indn) scroll up n lines
23103 # CSI <n>T (rin) scroll down n lines
23104 # CSI <n>X (ech) erase characters
23105 # CSI <n>Z (cbt) back up n tab stops
23106 # CSI <n>` cursor to column n on line
23107 # CSI <n>a (cuu) cursor right n characters
23108 # CSI <n>d (vpa) cursor to line n
23109 # CSI <n>e cursor down n lines and in first column
23110 # CSI <n>g (cbt) clear all tabs
23111 # CSI <n>z make virtual terminal n active
23112 # CSI ?7h (smam) turn automargin on
23113 # CSI ?7l (rmam) turn automargin off
23114 # CSI s save cursor position
23115 # CSI u restore cursor position to saved value
23116 # CSI =<c>A set overscan color
23117 # CSI =<c>F set normal foreground color
23118 # CSI =<c>G set normal background color
23119 # CSI =<c>H set reverse foreground color
23120 # CSI =<c>I set reverse foreground color
23121 # CSI =<c>J set graphic foreground color
23122 # CSI =<c>K set graphic foreground color
23123 # CSI =<n>g (dispc) display n from alternate graphics character set
23124 # CSI =<p>;<d>B set bell parameters
23125 # CSI =<s>;<e>C set cursor parameters
23126 # CSI =<x>D enable/disable intensity of background color
23127 # CSI =<x>E set/clear blink vs. bold background
23128 # CSI 7 (sc) (sc) save cursor position
23129 # CSI 8 (rc) (rc) restore cursor position to saved value
23130 # CSI H (hts) (hts) set tab stop
23131 # CSI Q<n><string> define function key string
23132 # (string must begin and end with delimiter char)
23133 # CSI c (clear) clear screen
23135 # The lack of any specification for attributes in SGR (among other things)
23136 # makes this a wretchedly weak standard. The table above is literally
23137 # everything iBSC2 has to say about terminal escape sequences; there is
23138 # no further discussion of their meaning or how to set the parameters
23139 # in these sequences at all.
23142 ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
23144 # The historical termcap file entries were written primarily in 4.4BSD termcap.
23145 # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
23146 # with the extension names chosen for compatibility with the termcap names
23147 # assigned in System V terminfo. There are some variant extension sets out
23148 # there. We try to describe them here.
23150 #### XENIX extensions:
23152 # The XENIX extensions include a set of function-key capabilities as follows:
23154 # code XENIX variable name terminfo name name clashes?
23155 # ---- ------------------- ------------- -----------------------
23157 # CR key_char_right
23158 # CW key_change_window create_window
23160 # HM key_home khome
23162 # LD key_delete_line kdl1
23163 # LF key_linefeed label_off
23164 # NU key_next_unlocked_cell
23165 # PD key_page_down knp
23167 # PN start_print mc5
23169 # PS stop_print mc4
23170 # PU key_page_up kpp pulse
23171 # RC key_recalc remove_clock
23172 # RF key_toggle_ref req_for_input
23173 # RT key_return kent
23174 # UP key_up_arrow kcuu1 parm_up_cursor
23176 # WR key_word_right
23178 # The XENIX extensions also include the following character-set and highlight
23181 # XENIX terminfo function
23182 # ----- -------- ------------------------------
23183 # GS smacs start alternate character set
23184 # GE rmacs end alternate character set
23185 # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
23186 # bo blink begin blink (not used in /etc/termcap)
23187 # be end blink (not used in /etc/termcap)
23188 # bb blink glitch (not used in /etc/termcap)
23189 # it dim begin dim (not used in /etc/termcap)
23190 # ie end dim (not used in /etc/termcap)
23191 # ig dim glitch (not used in /etc/termcap)
23193 # Finally, XENIX also used the following forms-drawing capabilities:
23195 # single double type ASCII approximation
23196 # ------ ------ ------------- -------------------
23197 # GV Gv vertical line |
23198 # GH Gv horizontal line - _
23199 # G1 G5 top right corner _ |
23200 # G2 G6 top left corner |
23201 # G3 G7 bottom left corner |_
23202 # G4 G8 bottom right corner _|
23203 # GD Gd down-tick character T
23204 # GL Gl left-tick character -|
23205 # GR Gr right-tick character |-
23206 # GC Gc middle intersection -|-
23207 # GU Gu up-tick character _|_
23209 # These were invented to take advantage of the IBM PC ROM character set. One
23210 # can compose an acsc string from the single-width characters as follows
23211 # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
23212 # When translating a termcap file, ncurses tic will do this automatically.
23213 # The double forms characters don't fit the SVr4 terminfo model.
23215 #### AT&T Extensions:
23217 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
23218 # nonstandard capabilities. Its signature is the KM capability, used to name
23219 # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
23220 # set. Comments in the original, and a little cross-checking with other AT&T
23221 # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
23222 # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
23223 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
23224 # cursor invisible), and CV=:ve: (make cursor normal).
23228 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
23229 # have the System V capabilities up to SVr1 level. After that, it supports
23230 # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
23231 # :mu: capabilities. After that, it supports caps plab_norm, label_on,
23232 # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
23233 # HP binary format incompatible with SVr4's.
23235 #### IBM Extensions
23237 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
23238 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
23239 # capabilities following prtr_non with the following special capabilities:
23240 # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
23241 # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
23242 # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
23243 # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
23244 # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
23245 # renamed (to kcbt and kslt). The places in the box[12] capabilities
23246 # correspond to acsc chars, here is the mapping:
23248 # box1[0] = ACS_ULCORNER
23249 # box1[1] = ACS_HLINE
23250 # box1[2] = ACS_URCORNER
23251 # box1[3] = ACS_VLINE
23252 # box1[4] = ACS_LRCORNER
23253 # box1[5] = ACS_LLCORNER
23254 # box1[6] = ACS_TTEE
23255 # box1[7] = ACS_RTEE
23256 # box1[8] = ACS_BTEE
23257 # box1[9] = ACS_LTEE
23258 # box1[10] = ACS_PLUS
23260 # The box2 characters are the double-line versions of these forms graphics.
23261 # The AIX binary terminfo format is incompatible with SVr4's.
23263 #### Iris console extensions:
23265 # HS is half-intensity start; HE is half-intensity end
23266 # CT is color terminal type (for Curses & rogue)
23267 # CP is color change escape sequence
23268 # CZ are color names (for Curses & rogue)
23270 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
23272 #### TC Extensions:
23274 # There is a set of extended termcaps associated with something
23275 # called the "Terminal Control" or TC package created by MainStream Systems,
23276 # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
23277 # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
23278 # that flags color terminals.
23280 ######## NCURSES USER-DEFINABLE CAPABILITIES
23282 # Extensions added after ncurses 5.0 generally use the "-x" option of tic and
23283 # infocmp to manipulate user-definable capabilities. Those that are intended
23284 # for use in either terminfo or termcap use 2-character names. Extended
23285 # function keys do not use 2-character names, and are available only with
23288 # As of mid-2012, no other terminfo/termcap implementation than ncurses
23289 # supports this extension; termcap libraries can as noted above make limited
23290 # use of the feature.
23292 # ncurses makes explicit checks for a few user-definable capabilities: AX, U8,
23295 #### SCREEN Extensions:
23297 # The screen program uses the termcap interface. It recognizes a few useful
23298 # nonstandard capabilities. Those are used in this file.
23300 # AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
23302 # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
23303 # E0 (str) Switch charset 'G0' back to standard charset.
23304 # S0 (str) Switch charset 'G0' to the specified charset.
23305 # XT (bool) Terminal understands special xterm sequences (OSC, mouse
23308 # AX is relatively straightforward; it is interpreted by ncurses to say that
23309 # SGR 39/49 reset the terminal's foreground and background colors to their
23312 # XT is harder, since screen's manpage does not give more details. For that,
23313 # we must read screen's source-code. When XT is set, screen assumes
23315 # a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
23316 # screen may also set the terminal's name, which is (for xterm) distinct
23317 # from the icon name.
23318 # b) OSC 20 sets the background pixmap. This is an rxvt feature.
23319 # c) OSC 39 and OSC 49 set the default foreground/background colors. Again
23320 # this is an rxvt feature.
23321 # d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
23322 # These are from xterm, although xterm accepts mouse codes that may not be
23323 # recognized by screen, e.g., 1005, 1006.
23324 # e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
23325 # sequence. However, because screen uses only termcap, the values returned
23326 # by Af/Ab are not usable because they rely on expressions that termcap
23327 # does not support. Therefore, screen uses a hardcoded string to work
23328 # around the limitation.
23329 # f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
23331 # The other ISO-2022 features are rarely used, but provided here to make
23332 # screen's termcap features available.
23334 #### XTERM Extensions:
23336 # Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
23337 # 1999), xterm has supported shift/control/alt/meta modifiers which produce
23338 # additional function-key strings. Some other developers copied the feature,
23339 # though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
23340 # these key definitions less ambiguous.
23342 # A few terminals provide similar functionality (sending distinct keys when
23343 # a modifier is used), including rxvt.
23345 # These are the extended keys defined in this file:
23347 # kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
23348 # kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
23349 # kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
23350 # kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
23352 # Here are the other xterm-related extensions which are used in this file:
23354 # Cr is a string capability which resets the cursor color
23355 # Cs is a string capability which sets the cursor color to a given value.
23356 # The single string parameter is the color name/number, according to the
23358 # Ms modifies the selection/clipboard. Its parameters are
23359 # p1 = the storage unit (clipboard, selection or cut buffer)
23360 # p2 = the base64-encoded clipboard content.
23361 # Se resets the cursor style to the terminal power-on default.
23362 # Ss is a string capability with one numeric parameter. It is used to set the
23363 # cursor style as described by the DECSCUSR function to a block or
23365 # TS is a string capability which acts like "tsl", but uses no parameter and
23366 # goes to the first column of the "status line".
23367 # XM is a string capability which overrides ncurses's built-in string which
23368 # enables/disables xterm mouse mode.
23369 # xm shows the format of the mouse responses. Parameters are (from zero):
23373 # p4 = state, e.g., pressed or released
23374 # p6 = y-ordinate starting region
23375 # p7 = x-ordinate starting region
23376 # p8 = y-ordinate ending region
23377 # p9 = x-ordinate ending region
23378 # Other extensions, used in xm:
23381 #### Miscellaneous extensions:
23383 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
23384 # This was implemented for the Hurd.
23385 # rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
23386 # experimental feature of tmux.
23387 # E3 clears the terminal's scrollback buffer. This was implemented in the
23388 # Linux 3.0 kernel as a security feature. It matches a feature which was
23389 # added in xterm patch #107.
23390 # U8 is a numeric capability which denotes a terminal emulator which does not
23391 # support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
23392 # value to enable it.
23394 ######## CHANGE HISTORY
23396 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
23397 # Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
23398 # maintained by Eric S. Raymond as part of the ncurses project.
23400 # This file contains all the capability information present in John Kunze's
23401 # last version of the termcap master file, except as noted in the change
23402 # comments at end of file. Some information about very ancient obsolete
23403 # capabilities has been moved to comments. Some all-numeric names of older
23404 # terminals have been retired.
23406 # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
23407 # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
23408 # used by BSD curses.
23410 # The 9.1.0 version of this file was translated from my lightly-edited copy of
23411 # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
23412 # the purpose. Unless the ncurses tic implementation and the Lisp code were
23413 # making perfectly synchronized mistakes which I then failed to catch by
23414 # eyeball, the translation was correct and perfectly information-preserving.
23416 # Major version number bumps correspond to major version changes in ncurses.
23418 # Here is a log of the changes since then:
23420 # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
23421 # * First terminfo master translated from 8.3.
23422 # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
23423 # * Replaced Wyse entries with updated entries supplied by vendor.
23425 # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
23426 # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
23427 # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
23428 # * Better XENIX keycap translation. Describe TC termcaps.
23429 # * Contact and history info supplied by Qume.
23430 # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
23431 # * Raided the Shuford FTP site for recent termcaps/terminfos.
23432 # * Added information on X3.64 and VT100 standard escape sequences.
23433 # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
23434 # * Added a correct X11R6 xterm entry.
23435 # * Fixed terminfo translations of padding.
23436 # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
23437 # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
23438 # * Added u6/u7/u8/u9 capabilities.
23439 # * Added PCVT entry.
23440 # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
23441 # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
23442 # to use reverse-video standout so Emacs will look right.
23443 # * Added el1 capability to ansi.
23444 # * Added smacs/rmacs to ansi.sys.
23446 # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
23447 # * New mt70 entry.
23448 # * Added COPYRIGHTS AND OTHER DELUSIONS.
23449 # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
23450 # smartvid & smarterm, ampex 175 & 219 & 232,
23451 # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
23452 # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
23453 # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
23454 # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
23455 # * Replaced the Perkin-Elmer entries with vendor's official ones.
23456 # * Restored the old minimal-ansi entry, luna needs it.
23457 # * Fixed some incorrect ip and proportional-padding translations.
23458 # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
23459 # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
23460 # * Make the xterm entry 65 lines again; create xterm25 and xterm24
23461 # to force a particular height.
23462 # * Added beehive4 and reorganized other Harris entries.
23463 # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
23464 # * Merged in DEC's official entries for its terminals. The only old
23465 # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
23466 # * Replaced the translated BBN BitGraph entries with purpose-built
23467 # ones from AT&T's SVr3.
23468 # * Replaced the AT&T entries with AT&T's official terminfos.
23469 # * Added teleray 16, vc415, cops10.
23470 # * Merged in many individual capabilities from SCO terminfo files.
23471 # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
23473 # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
23474 # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
23475 # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
23476 # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
23477 # simterm, citoh and variants.
23478 # * Replaced sol entry with sol1 and sol2.
23479 # * Replaced Qume QVT and Freedom-series entries with purpose-built
23480 # terminfo entries.
23481 # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
23482 # and dg200 entries using caps from from SCO.
23483 # * Added the usual set of function-key mappings to ANSI entry.
23484 # * Corrected xterm's function-key capabilities.
23485 # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
23486 # * Fix in xterm entry, cub and cud are not reliable under X11R6.
23487 # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
23488 # * Fix in xterm entry, get the arrow keys right.
23489 # * Change some \0 escapes to \200.
23490 # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
23491 # * Added apple (Videx card), adm1a, oadm31.
23492 # * Fixed malformed ampex csr.
23493 # * Fixed act4, cyb110; they had old-style prefix padding left in.
23494 # * Changed mandatory to advisory padding in many entries.
23495 # * Replaced HP entries up to hpsub with purpose-built ones.
23496 # * Blank rmir/smir/rmdc/smdc capabilities removed.
23497 # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
23498 # 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
23499 # * Replaced the Ann Arbor entries with SCO's, the init strings are
23500 # more efficient (but the entries otherwise identical).
23501 # * Added dg211 from Shuford archive.
23502 # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
23503 # adm42-nl, pc52, gs6300, xerox820, uts30.
23504 # * Pull SCO's padding into vi200 entry.
23505 # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
23506 # entries merged in from SCO's descriptions.
23507 # * Fixed old-style prefix padding on zen50, h1500.
23508 # * Moved old superbee entry to superbee-xsb, pulled in new superbee
23509 # entry from SCO's description.
23510 # * Reorganized the special entries.
23511 # * Added lm#0 to cbunix and virtual entries.
23513 # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
23514 # * Restored cdc456tst.
23515 # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
23516 # * Added megatek, beacon, microkit.
23517 # * Freeze for ncurses-1.9 release.
23518 # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
23519 # * Added historical data for TAB.
23520 # * Comment fixes from David MacKenzie.
23521 # * Added the new BSDI pc3 entry.
23522 # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
23523 # * A change in the tic -C logic now ensures that all entries in
23524 # the termcap translation will fit in < 1024 bytes.
23525 # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
23526 # from GNU termcap file. This merges in all their local information.
23527 # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
23528 # * Changed tic -C logic to dump all capabilities used by GNU termcap.
23529 # * Added warnings about entries with long translations (restoring
23530 # all the GNU termcaps pushes a few over the edge).
23531 # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
23532 # * Yet another tic change, and a couple of entry tweaks, to reduce the
23533 # number of long (> 1024) termcap translations back to 0.
23535 # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
23536 # * Added kf13-kf20 to Linux entry.
23537 # * Regularize Prime terminal names.
23538 # * Historical data on Synertek.
23539 # * Freeze for ncurses-1.9.1.
23540 # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
23541 # * Added true xterm-color entry, renamed djm's pseudo-color entry.
23542 # * Eliminate whitespace in short name fields, this tanks some scripts.
23543 # * Name field changes to shorten some long entries.
23544 # * Termcap translation now automatically generates empty rmir/smir
23545 # when ich1/ich is present (copes with an ancient vi bug).
23546 # * Added `screen' entries from FSF's screen-3.6.2.
23547 # * Added linux-nic and xterm-nic entries.
23548 # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
23549 # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
23550 # eliminating some special-case code in ncurses.
23552 # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
23553 # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
23554 # that captures everything unique from it.
23555 # * Added reorder script generator.
23556 # * Freeze for ncurses 1.9.2 release.
23557 # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
23558 # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
23559 # * Added Olaf Siebert's corrections for adm12.
23560 # * ansi-pc-color now includes the colors and pairs caps, so that
23561 # entries which use it will inherit them automatically.
23562 # * The linux entry can now recognize the center (keypad 5) key.
23563 # * Removed some junk that found its way into Linux acsc.
23565 # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
23566 # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
23567 # * xterm doesn't try to use application keypad mode any more.
23568 # * Freeze for ncurses-1.9.3 release.
23569 # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
23570 # * Added corrected sun entry from vendor.
23571 # * Added csr capability to linux entry.
23572 # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
23573 # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
23574 # * Some commented-out caps in long entries come back in, my code
23575 # for computing string-table lengths had a bug in it.
23576 # * pcansi series modified to fit comm-program reality better.
23577 # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
23578 # * BSD/OS actually ships the ibmpc3 bold entry as its console.
23579 # * Correct some bad aliases in the pcansi series
23580 # * Added entry for QNX console.
23581 # * Clean up duplicate long names for use with 4.4 library.
23582 # * Change vt100 standout to be normal reverse vide, not bright reverse;
23583 # this makes the Emacs status line look better.
23584 # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
23585 # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
23586 # * Minor surgery, mostly on name strings, to shorten termcap version.
23588 # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
23589 # * Added dec-vt100 for use with the EWAN emulator.
23590 # * Added kmous to xterm for use with xterm's mouse-tracking facility.
23591 # * Freeze for 1.9.5 alpha release.
23592 # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
23593 # * Changed xterm lines to 24, the X11R6 default.
23594 # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
23595 # * Added 7 newly discovered, undocumented acsc characters to linux
23596 # entry (the pryz{|} characters).
23597 # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
23598 # * Correct two typos in the xterm entries introduced in 9.9.1.
23599 # * I finally figured out how to translate ko capabilities. Done.
23600 # * Added tvi921 entries from Tim Theisen.
23601 # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
23602 # * Removed mystery tec entry, it was neither interesting nor useful.
23603 # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
23604 # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
23605 # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
23606 # by making them relative to use capabilities
23607 # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
23608 # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
23609 # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
23611 # * Translate all home=\E[;H capabilities to home=\E[H, they're
23613 # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
23614 # vt100 and ANSI-like terminals.
23615 # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
23616 # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
23617 # does this now, too.
23618 # * fviewpoint is gone, it duplicated screwpoint.
23619 # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
23620 # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
23621 # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
23622 # The UW vi50 replaces the old one, which becomes vi50adm,
23623 # * No more embedded commas in name fields.
23625 # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
23626 # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
23627 # * Introduced klone+* entries for describing Intel-console behavior.
23628 # * Linux kbs is default-mapped to delete for some brain-dead reason.
23629 # * -nsl -> -ns. The -pp syntax is obsolete.
23630 # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
23631 # * Make xterm entry do application-keypad mode again. I got complaints
23632 # that it was messing up someone's 3270 emulator.
23633 # * Added some longname fields in order to avoid warning messages from
23634 # older tic implementations.
23635 # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
23636 # it! (This gives us pi, greater than, less than, and a few more.)
23637 # * Freeze for ncurses-1.9.6 release.
23638 # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
23639 # * Add xon to a number of console entries, they're memory-mapped and
23640 # don't need padding.
23641 # * Correct the use dependencies in the ansi series.
23642 # * Hand-translate more XENIX capabilities.
23643 # * Added hpterm entry for HP's X terminal emulator.
23644 # * Added aixterm entries.
23645 # * Shortened four names so everything fits in 14 chars.
23647 # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
23648 # * Added ibcs2 entry and info on iBCS2 standard.
23649 # * Corrected hpa/vpa in linux entry. They still fail the worm test.
23650 # * We can handle the HP meml/memu capability now.
23651 # * Added smacs to klone entries, just as documentation.
23652 # * Corrected ansi.sys and cit-500 entries.
23653 # * Added z39, vt320-k311, v220c, and avatar entries.
23654 # * Make pcansi use the ansi.sys invis capability.
23655 # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
23656 # tvi925, tvi950, dt80, ncr7900i, h19.
23657 # * X3.64 has been withdrawn, change some references.
23658 # * Removed function keys from ansi-m entry.
23659 # * Corrected ansi.sys entry.
23660 # * Freeze for ncurses-1.9.7 release.
23661 # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
23662 # * Added rmam/smam capabilities to many entries based on init strings.
23663 # * Added correct hpa/vpa to linux.
23664 # * Reduced several entries relative to vt52.
23665 # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
23666 # * Exiled some utterly unidentifiable custom and homebrew types to the
23667 # UFO file; also, obsolete small-screen hardware; also, entries which
23668 # look flat-out incorrect, garbled, or redundant. These include the
23669 # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
23670 # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
23671 # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
23672 # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
23673 # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
23674 # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
23675 # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
23676 # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
23677 # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
23678 # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
23679 # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
23680 # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
23681 # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
23682 # * Corrected pcvt25h as suggested by Brian C. Grayson
23683 # <bgrayson@pine.ece.utexas.edu>.
23684 # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
23685 # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
23686 # * Added kent=\EOM to xterm entry.
23688 # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
23689 # * Corrected gigi entry.
23690 # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
23691 # bad hpa/vpa capabilities.
23692 # * Corrected flash strings to have a uniform delay of .2 sec. No
23693 # more speed-dependent NUL-padding!
23694 # * terminfo capabilities in comments bracketed with <>.
23695 # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
23696 # * Replaced pcvt with the 3.31 pcvt entries.
23697 # * Freeze for 1.9.7a.
23698 # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
23699 # * Added emu entry from the X11R6 contrib tape sources.
23701 # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
23702 # * Improved iris-ansi and sun entries.
23703 # * More flash string improvements.
23704 # * Corrected wy160 & wy160 as suggested by Robert Dunn
23705 # * Added dim to at386.
23706 # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
23707 # he's ready to start using the termcap generated from this one.
23708 # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
23709 # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
23710 # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
23711 # att610, att620, att630,
23712 # * Changed hazeltine name prefix from h to hz.
23713 # * Sent t500 to the UFI file.
23714 # * I think we've sucked all the juice out of BSDI's termcap file now.
23715 # * Freeze for ncurses 1.9.8 release
23716 # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
23717 # * Unfreeze, linux kbs needed to be fixed.
23718 # * Tim Theisen pinned down a bug in the DMD firmware.
23719 # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
23720 # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
23721 # (The broken ones had been shadowed by sgr.)
23722 # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
23723 # * Added documentation on ECMA-48 standard.
23724 # * New Amiga entry.
23725 # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
23726 # * More ECMA-48 stuff
23727 # * Corrected typo in minix entry, added pc-minix.
23728 # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
23729 # * Added rxvt entry.
23730 # * Added 1.3.x color-change capabilities to linux entry.
23731 # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
23732 # * Corrected rxvt entry khome/kend.
23733 # * Corrected linux color change capabilities.
23734 # * NeXT entries from Dave Wetzel.
23735 # * Cleaned up if and rf file names (all in /usr/share now).
23736 # * Changed linux op capability to avoid screwing up a background color
23737 # pair set by setterm.
23738 # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
23739 # * Added xterm-sun.
23740 # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
23743 # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
23744 # * Another sweep through the Shuford archive looking for new info.
23745 # * Added dg100 alias to dg6053 based on a comp.terminals posting.
23746 # * Added st52 from Per Persson.
23747 # * Added eterm from the GNU Emacs 19.30 distribution.
23748 # * Freeze for 1.9.9.
23749 # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
23750 # * FreeBSD console entries from Andrew Chernov.
23751 # * Removed duplicate Atari st52 name.
23752 # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
23753 # * xterm doesn't actually have ACS_BLOCK.
23754 # * Change klone+color setf/setb to simpler forms that can be
23755 # translated into termcap.
23757 # * Removed mechanically-generated junk capabilities from cons* entries.
23758 # * Added color support to bsdos.
23759 # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
23760 # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
23761 # * Created ecma+color, linux can use it. Also added ech to linux.
23762 # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
23763 # * Add descriptions to FreeBSD console entries. Also shorten
23764 # some aliases to <= 14 chars for portability.
23765 # * Added x68k console
23766 # * Added OTbs to several VT-series entries.
23767 # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
23768 # * screen entry update for 3.7.1 from Michael Alan Dorman.
23769 # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
23770 # * kterm correction due to Kenji Rikitake.
23771 # * ACS correction in vt320-kll due to Phillippe De Muyter.
23772 # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
23773 # * Sun console entry correction from J.T. Conklin.
23774 # * Changed all DEC VT300 and up terminals to use VT300 tab set
23775 # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
23776 # * Added smul to linux entry (we never noticed it was missing
23777 # because of sgr!).
23778 # * Added rmln to hp+labels (deduced from other HP entries).
23779 # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
23780 # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
23781 # * Corrected vt220 acsc.
23782 # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
23783 # this corresponds to reality and helps prevent some tic warnings.
23784 # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
23785 # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
23786 # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
23787 # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
23788 # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
23789 # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
23790 # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
23791 # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
23792 # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
23793 # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
23794 # ifmr, v3220, wy100q, tandem653, ibmaed.
23795 # * Added DWK terminal description.
23796 # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
23797 # * Many entries now have highlights inherited from adm+sgr.
23798 # * xterm entry now corresponds to XFree86 3.1.2E, with color.
23799 # * xtitle and xtitle-twm enable access to the X status line.
23800 # * Added linux-1.3.6 color palette caps in conventional format.
23801 # * Added adm1178 terminal.
23802 # * Move fos and apollo terminals to obsolete category.
23803 # * Aha! The BRL terminals file told us what the Iris extensions mean.
23804 # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
23805 # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
23807 # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
23808 # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
23809 # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
23810 # * Corrected, from BRL termcap file: vi50.
23811 # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
23812 # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
23813 # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
23814 # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
23815 # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
23816 # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
23817 # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
23818 # * Paired-attribute fixes to various terminals.
23819 # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
23820 # * xterm entry corrections from Thomas Dickey.
23821 # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
23822 # * Added t916 entry, translated from a termcap in SCO's support area.
23823 # * New qnx entry from Michael Hunter.
23824 # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
23825 # * Added hpex2 from Ville Sulko.
23826 # * Fixed a bug that ran the qnx and pcvtXX together.
23827 # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
23828 # * Added dtterm entry from Solaris CDE.
23829 # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
23830 # * corrected pairs#8 typo in dtterm entry.
23832 # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
23833 # * updated xterm entry to cover 3.1.2E's new features.
23834 # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
23835 # * Added new minix entry
23836 # * Removed aliases of the form ^[0-9]* for obsolete terminals.
23837 # * Commented out linux-old, nobody's using pre-1.2 kernels now.
23838 # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
23839 # * Added Prism entries and kt7ix.
23840 # * Caution notes about EWAN and tabset files.
23841 # * Changed /usr/lib/tabset -> /usr/share/tabset.
23842 # * Added acsc/rmacs/smacs to vt52.
23843 # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
23844 # * Merged in Thomas Dickey's reorganization of the xterm entries;
23845 # added technical corrections to avoid warning messages.
23846 # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
23847 # * Added rmso=\E[27m in Linux entry.
23848 # * Added koi8-r support for Linux console.
23849 # * Replace xterm entries with canonical ones from XFree86 3.2.
23850 # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
23851 # * Added color_xterm from Jacob Mandelson
23852 # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
23853 # * Back off the xterm entry to use r6 as a base.
23854 # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
23855 # * Added dec-vt220 at Adrian Garside's request.
23857 #-(original-changelog-1996/12/29-to-1998/02/28-by-TD)---------------------------
23859 # 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn
23860 # * Minor corrections to xterm entries.
23861 # * Replaced EWAN telnet entry.
23862 # * Dropped the reorder script generator. It was a fossil.
23863 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
23864 # * Replaced minitel-2 entry.
23865 # * Added MGR, ansi-nt.
23866 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
23867 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
23868 # the 4.4BSD Lite2 file.
23870 # 10.1.1 (Sat May 3 21:41:27 EDT 1997):
23871 # * Use setaf/setab consistently with SVr4.
23872 # * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5
23873 # 10.1.2 (Sat May 24 21:10:57 EDT 1997)
23874 # * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4)
23875 # * add xterm-16color, for XFree86 3.3
23876 # 10.1.3 (Sat May 31 12:21:05 EDT 1997)
23877 # * correct typo in emu
23878 # * correct typo in vt102-w (Robert Wuest)
23879 # * make new entry xterm-xf86-v33, restored xterm-xf86-v32.
23880 # 10.1.4 (Sun Jun 15 08:29:05 EDT 1997)
23881 # * remove ech capability from rxvt (it does the wrong thing)
23882 # 10.1.5 (Sat Jun 28 21:34:36 EDT 1997)
23883 # * remove spurious newlines from several entries (hp+color, wy50,
23884 # wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm,
23886 # 10.1.6 (Sat Jul 5 15:08:16 EDT 1997)
23887 # * correct rmso capability of wy50-mc
23888 # 10.1.7 (Sat Jul 12 20:05:55 EDT 1997)
23889 # * add cbt to xterm-xf86-v32
23890 # * disentangle some entries from 'xterm', preferring xterm-r6 in case
23891 # 'xterm' is derived from xterm-xf86-v32, which implements ech and
23892 # other capabilities not in xterm-r6.
23893 # * remove alternate character set from kterm entry.
23894 # 10.1.8 (Sat Aug 2 18:43:18 EDT 1997)
23895 # * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'.
23896 # 10.1.9 (Sat Aug 23 17:54:38 EDT 1997)
23897 # * add xterm-8bit entry.
23898 # 10.1.10 (Sat Oct 4 18:17:13 EDT 1997)
23899 # * repair several places where early version of tic replaced \, with \\\,
23900 # * make acsc entries canonical form (sorted, uniq).
23901 # * modify acsc entries for linux, linux-koi8
23902 # * new rxvt entry, from corrected copy of distribution in rxvt 2.21b
23903 # * add color, mouse support to kterm.
23904 # 10.1.11 (Sat Oct 11 14:57:10 EDT 1997)
23905 # * correct wy120 smxon/tbc capabilities which were stuck together.
23906 # 10.1.12 (Sat Oct 18 17:38:41 EDT 1997)
23907 # * add entry for xterm-xf86-v39t
23908 # 10.1.13 (Sat Nov 8 13:43:33 EST 1997)
23909 # * add u8,u9 to sun-il description
23910 # 10.1.14 (Sat Nov 22 19:59:03 EST 1997)
23911 # * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97
23913 # * add hds200 description (Walter Skorski)
23914 # * add EMX 0.9b descriptions
23915 # * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver)
23916 # * rename xhpterm back to hpterm.
23917 # 10.1.15 (Sat Nov 29 19:21:59 EST 1997)
23918 # * change initc in linux-c-nc to use 0..1000 range.
23919 # 10.1.16 (Sat Dec 13 19:41:59 EST 1997)
23920 # * remove hpa/vpa from rxvt, which implements them incorrectly.
23921 # * add sgr0 for rxvt.
23922 # * remove bogus smacs/rmacs from EMX descriptions.
23923 # 10.1.17 (Sat Dec 20 17:54:10 EST 1997)
23924 # * revised entry for att7300
23925 # 10.1.18 (Sat Jan 3 17:58:49 EST 1998)
23926 # * use \0 rather than \200.
23927 # * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution.
23928 # 10.1.19 (Sat Jan 17 14:24:57 EST 1998)
23929 # * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset.
23930 # * rename xterm-xf86-v39t to xterm-xf86-v40
23931 # * remove bold/underline from sun console entries since they're not
23933 # 10.1.20 (Sat Jan 24 11:02:51 EST 1998)
23934 # * add beterm entry (Fred Fish)
23935 # * add irix-color/xwsh entry.
23936 # * turn ncv off for linux.
23937 # 10.1.21 (Sat Jan 31 17:39:16 EST 1998)
23938 # * set ncv for FreeBSD console (treat colors with reverse specially).
23939 # * remove sgr string from qnx based on report by Xiaodan Tang
23940 # 10.1.22 (Wed Feb 11 18:40:12 EST 1998)
23941 # * remove spurious commas from descriptions
23942 # * correct xterm-8bit to match XFree86 3.9Ad F1-F4.
23943 # 10.1.23 (Sat Feb 28 17:48:38 EST 1998)
23944 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
23945 # apparently based on cp-866).
23947 #-(replaced-changelog-1998/02/28-by-ESR)----------------------------------------
23949 # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
23950 # * Replaced minitel-2 entry.
23951 # * Added MGR, ansi-nt.
23952 # * Minor corrections to xterm entries.
23953 # * Replaced EWAN telnet entry.
23954 # * Dropped the reorder script generator. It was a fossil.
23955 # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
23956 # * Thorsten Lockert added termcap `bs' to a lot of types, working from
23957 # the 4.4BSD Lite2 file.
23958 # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
23959 # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
23960 # * Updated iris-ansi; corrected vt102-w.
23961 # * Switch base xterm entry to 3.3 level.
23962 # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
23964 # * Removed rmir/smir from tv92B.
23966 # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
23967 # * add hds200 description (Walter Skorski)
23968 # * add beterm entry (Fred Fish)
23969 # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
23970 # iris-color entries.
23971 # * add emx entries.
23972 # * Replaced unixpc entry with Benjamin Sittler's corrected version.
23973 # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
23975 # * remove sgr string from qnx based on report by Xiaodan Tang
23976 # * Added u8/u9, removed rmul/smul from sun-il.
23977 # * 4.2 tic displays \0 rather than \200.
23978 # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
23979 # apparently based on cp-866).
23980 # * Merged in Pavel Roskin's acsc for linux-koi8
23981 # * Corrected some erroneous \\'s to \.
23982 # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
23983 # * II -> ii in pcvtXX, screen, xterm.
23984 # * Removed \n chars following ANSI escapes in sgr & friends.
23985 # * Updated Wyse entries.
23986 # * h19 corrections from Tim Pierce.
23987 # * Noted that the dm2500 has both ich and smir.
23988 # * added pccons for the Alpha under OSF/1.
23989 # * Added Sony NEWS workstation entries and cit101e-rv.
23990 # * Reverted `amiga'; to Kent Polk's version, as I'm told
23991 # the Verkuil entry messes up with Amiga Telnet.
23992 # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
23993 # * Corrected attributions in 10.2.0 release notes.
23994 # * Scanned the Shuford archive for new terminfos and information.
23995 # * Removed sgr from qnx entry (Thomas Dickey).
23996 # * Added entries for ICL and Kokusai Data Systems terminals.
23997 # * Incorporated NCR terminfos from the Boundless Technology FTP site.
23998 # * Incorporated att700 from the Boundless Technology FTP site.
23999 # * Miscellaneous contact-address and Web-page updates.
24001 #-(changelog-beginning-ncurses-4.2)---------------------------------------------
24004 # * add nxterm and xterm-color terminfo description (request by Cristian
24005 # Gafton <gafton@redhat.com>).
24006 # * modify rxvt terminfo description to clear alternate screen before
24007 # switching back to normal screen, for compatibility with applications
24008 # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
24009 # * modify linux terminfo description to reset color palette (reported
24010 # by Telford Tendys <telford@eng.uts.edu.au>).
24013 # * merge changes from current XFree86 xterm terminfo descriptions.
24016 # * Added minitel1 entries from Alexander Montaron.
24017 # * Added qnxt2 from Federico Bianchi.
24018 # * Added arm100 terminfo entries from Dave Millen.
24021 # * Added ncsa telnet entries from Francesco Potorti
24024 # * modify ncsa telnet entry to reflect color, other capabilities based on
24025 # examination of the source code - T.Dickey.
24028 # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
24031 # * Added Francesco Potorti's tuned Wyse 99 entries.
24032 # * dtterm enacs correction from Alexander V. Lukyanov.
24033 # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
24034 # * correct a typo in icl6404 entry.
24035 # * add xtermm and xtermc
24038 # * format most %'char' sequences to %{number}
24039 # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
24040 # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
24043 # * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
24044 # * correct initialization string in xterm-r5, add misc other features
24045 # to correspond with xterm patch #84 - TD
24048 # * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
24049 # * add Mathew Vernon's mach console entries
24050 # * corrections for ncsa function-keys (report by Larry Virden)
24053 # * change linux to use ncv#2, since underline does not work with color - TD
24056 # * add kbt to iris-ansi, document other shift/control functionkeys - TD
24057 # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
24058 # application modes, change kent to use the correct keypad code - TD
24061 # * add entry for Tera Term - TD
24064 # * minor improvements for teraterm entry - TD
24065 # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
24066 # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
24069 # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
24070 # xterm and ncsa entries by removing the unneeded ones. Note that
24071 # some entries will return kend & khome versus kslt and kfnd, for
24072 # PC-style keyboards versus strict vt220 compatibility - TD
24075 # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
24077 # * add 'crt' entry - TD
24078 # * correct typos in 'linux-c' entry - TD
24081 # * update entries for BSD/OS console to use klone+sgr and klone+color
24082 # (Jeffrey C Honig)
24085 # * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
24088 # * add linux-lat, from RedHat patches to ncurses 4.2
24091 # * add complete set of default function-key definitions for scoansi - TD.
24094 # * add cnorm, cvvis for Linux 2.2 kernels
24097 # * add kmous to xterm-r5 -TD
24098 # * correct entries xterm+sl and xterm+sl-twm, which were missing the
24099 # parent "use" clause -TD
24102 # * corrected cnorm, added el1 in 'screen' description -TD
24105 # * add ms-vt100 -TD
24108 # * corrections to beterm entry -TD
24111 # * add cygwin entry -TD
24114 # * minor corrections for beterm entry -TD
24117 # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
24120 # * add amiga-8bit entry
24121 # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
24122 # rcons-color, based on
24123 # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
24124 # * add alias for iris-ansi-net
24127 # * corrected scoansi entry's acsc, some function keys, add color -TD
24130 # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
24131 # * reorder ncsa entries to make ncsa-vt220 use the alternate function
24132 # key mapping, leaving Potorti's entries more like he named them -TD
24133 # * remove enter/exit am-mode from cygwin -TD
24136 # * correct typos in several entries (missing '[' from CSI):
24137 # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
24138 # strings for avt-ns -TD
24139 # * add 'dim' to ncv mask for linux (report by Klaus Weide).
24142 # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
24143 # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
24144 # * add xterm-88color and xterm-256color -TD
24147 # * add "obsolete" termcap strings -TD
24148 # * add kvt and gnome entries -TD
24151 # * correct cup string for regent100 -TD
24154 # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
24155 # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
24156 # * change OTrs capabilities to rs2 -TD
24157 # * add obsolete and extended capabilities to 'screen' -TD
24160 # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
24162 # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
24163 # and adding kcbt -TD
24166 # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
24167 # nonstandard resource settings -TD
24170 # * minor fixes for xterm-*, based on Debian #58530 -TD
24173 # * add several terminal types from esr's "11.0", as well as comments.
24174 # bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
24175 # vt220-8bit, vt220-old, wy85-8bit
24178 # * add several terminal types from esr's "11.0.1" (ansi-*).
24179 # * update OTxx capabilities for changes on 2000/3/4.
24180 # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
24183 # * move screen's AX extension to ecma+color, modify several entries to
24184 # use that, adjusting ncv as needed -TD
24187 # * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig)
24188 # * correct spelling error in entry name: bq300-rv was given as bg300-rv
24189 # in esr's version.
24192 # * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD
24193 # * correct color definition for ibm3164, make minor changes to other
24194 # IBM terminal definitions based on recent terminfo descriptions -TD
24197 # * add mgterm, from NetBSD -TD
24198 # * add alias sun-cgsix for sun-ss5 as per NetBSD
24199 # * change cons25w to use rs2 for reset rather than rs1 -TD
24200 # * add rc/sc to aixterm based on manpage -TD
24203 # * remove ncv from xterm-16color, xterm-256color
24206 # * add kmous capability to linux to use Joerg Schoen's gpm patch.
24209 # * add Eterm (Michael Jennings)
24212 # * add amiga-vnc entry.
24215 # * correct description of Top Gun Telnet.
24216 # * add kterm-color
24219 # * add qansi* entries from QNX ftp site.
24222 # * add Matrix Orbital entries by Eric Z. Ayers).
24223 # * add xterm-basic, xterm-sco entries, update related entries to XFree86
24227 # * add S0, E0 extensions to screen's entry -TD
24230 # * several corrections based on tic's new parameter-checking code -TD
24231 # * modify xterm-r6 and similar rs2 sequences which had \E7...\E8
24232 # bracketing sequences that reset video attributes (\E8 would restore
24236 # * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD
24239 # * improved scoansi, based on SCO man-page, and testing console,
24240 # scoterm with tack -TD
24243 # * modify kterm to use acsc via SCS controls.
24246 # * screen 3.9.8 allows xterm mouse controls to pass-through
24249 # * remove spurious "%|" from some xterm entries.
24252 # * modify 'screen' khome/kend to match screen 3.09.08
24253 # * add examples of 'screen' customization (screen.xterm-xfree86,
24254 # screen.xterm-r6, screen.teraterm) -TD
24257 # * correct definitions of shifted editing keys for xterm-xfree86 -TD
24258 # * add "Apple_Terminal" entries -Benjamin Sittler
24259 # * remove time-delays from "Apple_Terminal" entries -TD
24260 # * make sgr entries time-delays consistent with individual caps -TD
24263 # * corrected/updated screen.xterm-xfree86
24266 # * ELKS descriptions, from Federico Bianchi
24267 # * add u6 (CSR) to Eterm (Michael Jennings).
24270 # * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's
24271 # tic which handles names no longer than 14 characters. Add
24272 # corresponding descriptions for the Darwin PowerPC console named
24273 # "xnuppc" -Benjamin Sittler
24276 # * change kbs in mach entries to ^? (Marcus Brinkmann).
24279 # * add "putty" entry -TD
24280 # * updated "Apple_Terminal" entries -Benjamin Sittler
24283 # * add ms-vt100-color entry -TD
24284 # * add "konsole" entries -TD
24287 # * update gnome entry to Redhat 7.2 -TD
24290 # * add kf13-kf48 strings to cons25w -TD
24291 # * add pcvt25-color entry -TD
24292 # * changed a few /usr/lib/tabset -> /usr/share/tabset.
24293 # * improve some features of scoansi entry based on SCO's version -TD
24294 # * add scoansi-new entry corresponding to OpenServer 5.0.6
24297 # * add kcbt to screen entry -TD
24300 # * add rxvt-16color, ibm+16color, mvterm entries -TD
24303 # * split out linux-basic entry, making linux-c inherit from that, and
24304 # in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect
24305 # the history of this console type -TD
24306 # * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the
24307 # r/g/b parameters of initc are in the range 0 to 1000 -TD
24310 # * minor fix for scale-factor of linux-c and linux-c-nc -TD
24313 # * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2
24314 # in the latter -TD
24317 # * add entries for mterm (mterm, mterm-ansi, decansi) -TD
24318 # * ncr260wy350pp has only 16 color pairs -TD
24319 # * add sun-type4 from NetBSD -TD
24320 # * update xterm-xfree86 to current (xterm patch #170) -TD
24321 # * add screen-bce, screen-s entries -TD
24322 # * add xterm-1002, xterm-1003 entries -TD
24325 # * update homepage for Top Gun Telnet/SSH
24328 # * reduce duplication in emx entries, added emx-base -TD
24331 # * corrected acs for screen.teraterm -TD
24332 # * add tkterm entry -TD
24335 # * cygwin changes from Charles Wilson:
24336 # misc/terminfo.src (nxterm|xterm-color): make xterm-color
24337 # primary instead of nxterm, to match XFree86's xterm.terminfo
24338 # usage and to prevent circular links.
24339 # (rxvt): add additional codes from rxvt.org.
24340 # (rxvt-color): new alias
24341 # (rxvt-xpm): new alias
24342 # (rxvt-cygwin): like rxvt, but with special acsc codes.
24343 # (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or
24344 # with a "native" MSWin GUI. Each takes different acsc codes,
24345 # which are both different from the "normal" rxvt's acsc.
24346 # (cygwin): cygwin-in-cmd.exe window. Lots of fixes.
24347 # (cygwinDBG): ditto.
24350 # * update gnome terminal entries -TD
24353 # * add entries for djgpp 2.03 and 2.04 -TD
24356 # * add alias for vtnt -TD
24357 # * update xterm-xfree86 for XFree86 4.4 -TD
24360 # * add linux-vt (Andrey V Lukyanov)
24363 # * add screen.linux -TD
24366 # * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler)
24369 # * add OpenNT/Interix/SFU entries (Federico Bianchi)
24370 # * add vt100+ and vt-utf8 entries -TD
24371 # * add uwin entry -TD
24374 # * add sgr strings to several common entries lacking them, e.g.,
24375 # screen, to make the entries more portable -TD
24376 # * remove cvvis from rxvt entry, since it is the same as cnorm -TD
24377 # * similar fixups for cvvis/cnorm various entries -TD
24380 # * remove 'ncv' from xterm-256color (xterm patch #188) -TD
24384 # * add xterm-xf86-v44 -TD
24385 # * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies
24386 # on G1 being used via an ISO-2022 escape sequence (report by
24387 # Juliusz Chroboczek) -TD
24388 # * add 'hurd' entry -TD
24391 # * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than
24393 # * align with xterm #192's use of xterm-new -TD
24394 # * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD
24395 # * make xterm-new the default "xterm" -TD
24398 # * minor fixes for emu -TD
24400 # * add rmam/smam to linux (Trevor Van Bremen)
24401 # * change wyse acsc strings to use 'i' map rather than 'I' -TD
24402 # * fixes for avatar0 -TD
24403 # * fixes for vp3a+ -TD
24406 # * add xterm-pc-fkeys -TD
24407 # * review/update gnome and gnome-rh90 entries (prompted by
24408 # Redhat Bugzilla #122815) -TD
24409 # * review/update konsole entries -TD
24410 # * add sgr, correct sgr0 for kterm and mlterm -TD
24411 # * correct tsl string in kterm -TD
24414 # * make ncsa-m rmacs/smacs consistent with sgr -TD
24415 # * add sgr, rc/sc and ech to syscons entries -TD
24416 # * add function-keys to decansi -TD
24417 # * add sgr to mterm-ansi -TD
24418 # * add sgr, civis, cnorm to emu -TD
24419 # * correct/simplify cup in addrinfo -TD
24420 # * corrections for gnome and konsole entries
24421 # (Redhat Bugzilla #122815) -Hans de Goede
24422 # * modify DEC entries (vt220, etc), to add sgr string, and to use
24423 # ISO-2022 strings for rmacs/smacs -TD
24426 # * rename xterm-pc-fkeys to xterm+pcfkeys -TD
24429 # * improved putty entry -Robert de Bath
24432 # * remove dch/dch1 from rxvt because they are implemented inconsistently
24433 # with the common usage of bce/ech -TD
24434 # * remove khome from vt220 (vt220's have no home key) -TD
24435 # * add rxvt+pcfkeys -TD
24438 # * modify several entries to ensure xterm mouse and cursor visibility
24439 # are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm,
24440 # Eterm, screen. (The xterm entries are left alone - old ones for
24441 # compatibility, and the new ones do not require this change) -TD
24444 # * add morphos entry -Pavel Fedin
24445 # * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin
24446 # * corrected \E[5?l to \E[?5l in vt320 entries -TD
24449 # * update wsvt25 entry -TD
24452 # * update pairs for xterm-88color and xterm-256color to reflect the
24453 # ncurses extended-color support -TD
24456 # * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD
24457 # * add aixterm-16color to demonstrate 16-color capability -TD
24460 # * add media-copy to vt100 -TD
24461 # * corrected acsc string for vt52 -TD
24464 # * add kUP, kDN (user-defined shifted up/down arrow) definitions for
24466 # * add kUP5, kUP6, etc., for xterm-new and rxvt -TD
24469 # * re-corrected acsc string for vt52 -TD
24472 # * corrected sun-il sgr string which referred to bold and underline -TD
24473 # * add sun-color entry -TD
24476 # * modify sgr0 in several entries to reset alternate-charset as in the
24478 # * modify sgr string of prism9 to better match the individual
24482 # * correct order of use= in rxvt-basic -TD
24485 # * use kind/kri as shifted up/down cursor keys for xterm-new -TD
24488 # * other minor fixes to cygwin based on tack -TD
24489 # * correct smacs in cygwin (report by Baurzhan Ismagulov).
24492 # * add nsterm-16color entry -TD
24493 # * remove ncv flag from xterm-16color -TD
24494 # * remove setf/setb from xterm-256color to match xterm #209 -TD
24495 # * update mlterm entry to 2.9.2 -TD
24498 # * fixes to make nsterm-16color match report
24499 # by Christian Ebert -Alain Bench
24502 # * add xterm+256color building block -TD
24503 # * add gnome-256color, putty-256color, rxvt-256color -TD
24506 # * add hpterm-color -TD
24509 # * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD
24510 # * add gnome-fc5 (prompted by GenToo #122566) -TD
24511 # * remove obsolete/misleading comments about kcbt on Linux -Alain Bench
24512 # * improve xterm-256color by combining the ibm+16color setaf/setab
24513 # strings with SGR 48. The setf/setb strings also are cancelled here
24514 # rather than omitted so derived entries will cancel those also -Alain
24518 # * add some notes regarding copyright to terminfo.src -TD
24519 # * use rxvt+pcfkeys in Eterm -TD
24520 # * remove km and flash from gnome, Eterm and rxvt since they do not work
24521 # as one would expect (km sends ESC rather than setting the 8th bit
24523 # * add/use ansi+enq, vt100+enq and vt102+enq -TD
24524 # * add konsole-solaris -TD
24527 # * update xterm-sun and xterm-sco entries to match xterm #216 -TD
24528 # * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD
24529 # * modify xterm-24 to inherit from "xterm" -TD
24530 # * add xiterm entry -TD
24531 # * add putty-vt100 entry -TD
24532 # * corrected spelling of Michael A Dorman's name, prompted by
24533 # http://www.advogato.org/person/mdorman/diary.html -TD
24536 # * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD
24537 # * update xterm+pcfkeys to match xterm #216 -TD
24540 # * make descriptions of xterm entries consistent with its terminfo -TD
24543 # * add xfce, mgt -TD
24546 # * correct acsc string in kterm -TD
24549 # * add kon entry -TD
24550 # * remove invis from linux and related entries, add klone+sgr8 for those
24551 # that implement the feature (or have not been shown to lack it) -TD
24554 # * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD
24555 # * minor improvements to rxvt+pcfkeys -TD
24558 # * fix a few typos in if/then/else expressions -TD
24561 # * add several GNU Screen variations with 16- and 256-colors, and
24562 # status line (Alain Bench).
24565 # * add Newbury Data entries (Jean-Charles Billaud).
24568 # * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD
24571 # * restore section of pre-ncurses-4.2 changelog to fix attribution -TD
24572 # * add konsole-256color entry -TD
24575 # * add 9term entry (request by Juhapekka Tolvanen) -TD
24578 # * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD
24579 # * add shift-control- and control-modified keys for rxvt editing
24581 # * update mlterm entry to 2.9.3 -TD
24582 # * add mlterm+pcfkeys -TD
24585 # * move kLFT, kRIT, kind and kri capabilities from xterm-new to
24586 # xterm+pcc0, etc., to make the corresponding building blocks reflect
24587 # xterm's capabilities -TD
24588 # * add mrxvt entry -TD
24589 # * add xterm+r6f2, use in mlterm and mrxvt entries -TD
24592 # * correct acsc strings for h19 and z100 (Benjamin Sittler)
24595 # * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
24596 # xterm starting with xterm patch #216 -TD
24597 # * make legacy xterm entries such as xterm-24 inherit from xterm-old,
24598 # to match xterm #230 -TD
24599 # * extend xterm+pccX entries to match xterm #230 -TD
24600 # * add xterm+app, xterm+noapp, from xterm #230 -TD
24601 # * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
24604 # * add screen.rxvt -TD
24607 # * add screen+fkeys (prompted by Debian #478094) -TD
24610 # * add screen.mlterm -TD
24611 # * improve mlterm and mlterm+pcfkeys -TD
24614 # * add Eterm-256color, Eterm-88color -TD
24615 # * add rxvt-88color -TD
24618 # * add teraterm4.59 entry, use that as primary teraterm entry, rename
24619 # original to teraterm2.3 -TD
24620 # * update "gnome" to 2.22.3 -TD
24621 # * update "konsole" to 1.6.6 -TD
24622 # * add "aterm" -TD
24623 # * add "linux2.6.26" -TD
24626 # * change several \E[2g (clear tab at current column) to \E[3g
24627 # (clear all tabs) to match definition for tbc capability -TD
24630 # * add eterm-color -TD
24633 # * add screen.Eterm -TD
24636 # * correct typo in pfkey of ansi.sys-old
24637 # (report by Kalle Olavi Niemitalo)
24638 # * move function- and cursor-keys from emx-base to ansi.sys, and create
24639 # a pfkey capability which handles F1-F48 -TD
24642 # * add vwmterm entry (Bryan Christ)
24645 # * change ncv and op capabilities in sun-color to match Sun's entry for
24646 # this (report by Laszlo Peter)
24647 # * improve interix smso by using reverse rather than bold (report by
24648 # Kristof Zelechovski).
24651 # * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
24652 # * add linux-16color (Benjamin Sittler)
24653 # * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
24654 # * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
24655 # * add ccc and initc capabilities to xterm-16color -TD
24658 # * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
24661 # * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
24664 # * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
24665 # * rename minix to minix-1.7, add minix entry for Minix3 -TD
24668 # * add bterm (bogl 0.1.18) -TD
24669 # * minor fix to rxvt+pcfkeys -TD
24672 # * update mrxvt to 0.5.4, add mrxvt-256color -TD
24675 # * add several screen-bce.XXX entries -TD
24678 # * modify screen-bce.XXX entries to exclude ech, since screen's color
24679 # model does not clear with color for that feature -TD
24682 # * rename atari and st52 to atari-old, st52-old, use newer entries from
24683 # FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
24686 # * add mlterm-256color entry -TD
24689 # * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
24690 # the alternate character set (patch by Nicholas Marriott)
24693 # * improve acsc for vt52 (Benjamin Sittler)
24694 # * modify nsterm entries for consistent sgr/sgr0 -TD
24695 # * modify xnuppc entries for consistent sgr/sgr0 -TD
24696 # * add invis to tek4115 sgr -TD
24699 # * reformat acsc strings to canonical format -TD
24702 # * add "XT" capability to entries for terminals that support both
24703 # xterm-style mouse- and title-controls, for "screen" which
24704 # special-cases TERM beginning with "xterm" or "rxvt" -TD
24707 # * fill in no-parameter forms of cursor-movement where a parameterized
24708 # form is available -TD
24709 # * fill in missing cursor controls where the form of the controls is
24711 # * add parameterized cursor-controls to linux-basic (report by Dae) -TD
24714 # * correct comparison used for setting 16-colors in linux-16color
24715 # entry (Novell #644831) -TD
24716 # * improve linux-16color entry, using "dim" for color-8 which makes it
24717 # gray rather than black like color-0 -TD
24720 # * make "vte" the principal entry defining "gnome", since GNOME terminal
24721 # is merely one of several terminals whose behavior is provided by this
24725 # * fix typo in rmso for tek4106 -Goran Weinholt
24728 # * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
24729 # * also suppress ncv in konsole-base -TD
24732 # * add U8 feature to denote entries for terminal emulators which do not
24733 # support VT100 SI/SO when processing UTF-8 encoding -TD
24734 # * add xterm-utf8 as a demo of the U8 feature -TD
24737 # * add cons25-debian entry (Brian M Carlson, Debian #607662).
24740 # * update minix entry to minix 3.2 (Thomas Cort).
24743 # * fix inconsistent tabset path in pcmw (Todd C. Miller).
24744 # * remove a backslash which continued comment, obscuring altos3
24745 # definition with OpenBSD toolset (Nicholas Marriott).
24748 # * add/use xterm+tmux chunk from xterm #271 -TD
24749 # * resync xterm-new entry from xterm #271 -TD
24750 # * add E3 extended capability to linux-basic (Miroslav Lichvar)
24751 # * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
24752 # * add SI/SO change to linux2.6 entry (Debian #515609) -TD
24755 # * add kich1 to sun (Yuri Pankov)
24756 # * use bold rather than reverse for smso in sun-color (Yuri Pankov).
24759 # * corrected k9 in dg460-ansi, add other features based on manuals -TD
24762 # * minor cleanup of X-terminal emulator section -TD
24763 # * add terminator entry -TD
24764 # * add simpleterm entry -TD
24767 # * add xterm+kbs fragment from xterm #272 -TD
24770 # * add pccon entries for OpenBSD console (Alexei Malinin)
24773 # * corrected old changelog comments -TD
24776 # * add putty-sco -TD
24779 # * add mach-gnu (Samuel Thibault)
24780 # * add mach-gnu-color, tweaks to mach-gnu -TD
24781 # * make sgr for sun-color agree with smso -TD
24782 # * make sgr for prism9 agree with other caps -TD
24783 # * make sgr for icl6404 agree with other caps -TD
24784 # * make sgr for ofcons agree with other caps -TD
24785 # * make sgr for att5410v1, att4415, att620 agree with other caps -TD
24786 # * make sgr for aaa-unk, aaa-rv agree with other caps -TD
24787 # * make sgr for avt-ns agree with other caps -TD
24790 # * make sgr for xterm-pcolor agree with other caps -TD
24791 # * make sgr for att5425 agree with other caps -TD
24792 # * make sgr for att630 agree with other caps -TD
24793 # * make sgr for linux entries agree with other caps -TD
24794 # * make sgr for tvi9065 agree with other caps -TD
24795 # * make sgr for ncr260vt200an agree with other caps -TD
24796 # * make sgr for ncr160vt100pp agree with other caps -TD
24797 # * make sgr for ncr260vt300an agree with other caps -TD
24798 # * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
24799 # * make sgr for cygwin, cygwinDBG agree with other caps -TD
24802 # * correct order of use-clauses in st-256color -TD
24805 # * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
24808 # * document all of the user-defined capabilities in one place -TD
24809 # * add XT to some places to improve usefulness for other applications
24810 # than screen, which would like to pretend that xterm's title is
24811 # a status-line. -TD
24812 # * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
24813 # of ordering and overrides -TD
24816 # * add msgr to vt420, similar DEC vtXXX entries -TD
24817 # * add several missing vt420 capabilities from vt220 -TD
24818 # * factor out ansi+pp from several entries -TD
24819 # * change xterm+sl and xterm+sl-twm to include only the status-line
24820 # capabilities and not "use=xterm", making them more generally useful
24821 # as building-blocks -TD
24822 # * add dec+sl building block, as example -TD
24825 # * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
24826 # * add eslok flag to dec+sl -TD
24827 # * dec+sl applies to vt320 and up -TD
24828 # * drop wsl width from xterm+sl -TD
24829 # * reuse xterm+sl in putty and nsca-m -TD
24830 # * add ansi+tabs to vt520 -TD
24831 # * add ansi+enq to vt220-vt520 -TD
24834 # * remove p6 (bold) from opus3n1+ for consistency -TD
24835 # * remove acs stuff from env230 per clues in Ingres termcap -TD
24836 # * modify env230 sgr/sgr0 to match other capabilities -TD
24837 # * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
24838 # * make sgr for dku7202 agree with other caps -TD
24839 # * make sgr for ibmpc agree with other caps -TD
24840 # * make sgr for tek4107 agree with other caps -TD
24841 # * make sgr for ndr9500 agree with other caps -TD
24842 # * make sgr for sco-ansi agree with other caps -TD
24843 # * make sgr for d410 agree with other caps -TD
24844 # * make sgr for d210 agree with other caps -TD
24845 # * make sgr for d470c, d470c-7b agree with other caps -TD
24848 # * rewrite vt520 entry based on vt420 -TD
24849 # * corrected 'op' for bterm (report by Samuel Thibault) -TD
24852 # * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
24853 # analysis by Martin Husemann).
24854 # * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
24855 # Onno van der Linden).
24856 # * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
24857 # * add kdch1, etc., to qvt108 -TD
24858 # * add dl1/il1 to some entries based on dl/il values -TD
24859 # * add dl to simpleterm -TD
24862 # * modify some older xterm entries to align with xterm source -TD
24863 # * separate "xterm-old" alias from "xterm-r6" -TD
24866 # * add E3 to xterm-basic and putty -TD
24869 # * add nsterm-256color, make this the default nsterm -TD
24870 # * remove bw from nsterm-bce, per testing with tack -TD
24873 # * add vte-2012, gnome-2012, making these the defaults for vte/gnome
24874 # (patch by Christian Persch).
24877 # * reviewed vte-2012, reverted most of the change since it was incorrect
24878 # based on testing with tack -TD
24879 # * un-cancel the initc in vte-256color, since this was implemented
24880 # starting with version 0.20 in 2009 -TD
24883 # * correct typo in sgr string for sun-color,
24884 # add bold for consistency with sgr,
24885 # change smso for consistency with sgr -TD
24886 # * correct typo in sgr string for terminator -TD
24887 # * add blink to the attributes masked by ncv in linux-16color (report
24888 # by Benjamin Sittler)
24891 # * change initialization for vt220, similar entries for consistency
24892 # with cursor-key strings (NetBSD #47674) -TD
24893 # * further improvements to linux-16color (Benjamin Sittler)
24896 # * move nsterm-related entries out of "obsolete" section to more
24897 # plausible "ansi consoles" -TD
24898 # * additional cleanup of table-of-contents by reordering -TD
24901 # * added note to clarify Terminal.app's non-emulation of the various
24902 # terminal types listed in the preferences dialog -TD
24905 # * use TS extension to describe xterm's title-escapes -TD
24906 # * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
24907 # * update hurd.ti, add xenl to reflect 2011-03-06 change in
24908 # http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
24909 # (Debian #727119).
24910 # * simplify pfkey expression in ansi.sys -TD
24913 # * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
24916 # * updated notes for wsvt25 based on tack and vttest -TD
24917 # * add teken entry to show actual properties of FreeBSD's "xterm"
24921 # * add terminology entry -TD
24922 # * add mlterm3 entry, use that as "mlterm" -TD
24923 # * inherit mlterm-256color from mlterm -TD
24926 # * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
24929 # * cancel ccc in putty-256color and konsole-256color for consistency
24930 # with the cancelled initc capability (patch by Sven Zuhlsdorf).
24931 # * add xterm+256setaf building block for various terminals which only
24932 # get the 256-color feature half-implemented -TD
24933 # * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
24937 # * add vt520ansi (Mike Gran)
24940 # * correct several entries which had termcap-style padding used in
24941 # terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
24942 # * correct syntax for padding in some entries: dg211, h19 -TD
24943 # * correct ti924-8 which had confused padding versus octal escapes -TD
24944 # * correct padding in sbi entry -TD
24947 # * update xterm-new to xterm patch #305 -TD
24948 # + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
24949 # (italic). This was a long-ago typo in screen 3.1.1 which was
24950 # overlooked until a few terminal emulators implemented the feature -TD
24953 # > fix regression in screen terminfo entries (reports by Christian
24954 # Ebert, Gabriele Balducci) -TD
24955 # + revert the change to screen; see notes for why this did not work -TD
24956 # + cancel sitm/ritm for entries which extend "screen", to work around
24957 # screen's hardcoded behavior for SGR 3 -TD
24960 # + modify sgr for screen.xterm-new to support dim capability -TD
24961 # + add dim capability to nsterm+7 -TD
24962 # + cancel dim capability for iterm -TD
24963 # + add dim, invis capabilities to vte-2012 -TD
24964 # + add sitm/ritm to konsole-base and mlterm3 -TD
24967 # + add xterm-1005 and xterm-1006 entries, with suggested extension
24968 # capability "xm" -TD
24971 # + update test-report for mrxvt -TD
24974 # + add xterm-x10mouse, xterm-x11mouse, etc. -TD
24977 # + reviewed terminology 0.6.1, add function key definitions. None of
24978 # the vt100-compatibility issues were improved -TD
24981 # + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
24982 # + add several key definitions to nsterm-bce to match preconfigured
24983 # keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
24986 # + remove unnecessary ';' from E3 capabilities -TD
24987 # + add tmux entry, derived from screen (patch by Nicholas Marriott).
24988 # + split-out recent change to nsterm-bce as nsterm-build326, and add
24989 # nsterm-build342 to reflect changes with successive releases of OSX
24990 # (discussion with Leonardo B Schenkel)
24991 # + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
24995 # + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
24996 # + add several screen.XXX entries to support the respective variations
24997 # for 256 colors -TD
25000 # + add putty+fnkeys* building-block entries -TD
25003 # + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
25004 # + add vte-2014, update vte to use that -TD
25007 # + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
25008 # from xterm-new (report by Richard Birkett) -TD
25011 # + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
25012 # + fixes for st 0.5 from testing with tack -TD
25015 # + updated minitel entries to fix kel problem with emacs, and add
25016 # minitel1b-nb (Alexandre Montaron).
25017 # + reviewed/updated nsterm entry Terminal.app in OSX -TD
25018 # + replace some dead URLs in commands with equivalents from the
25019 # Internet Archive -TD
25022 # + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
25023 # + add keys f12-f124 to pccon+keys (Tati Chevron).
25026 # + fix some inconsistencies in the pccon* entries -TD
25029 # + add viewdata (Alexandre Montaron).
25032 # + tidy up comments about hardcoded 256color palette (report by
25033 # Leonardo Brondani Schenkel) -TD
25034 # + add putty-noapp entry, and amend putty entry to use application mode
25035 # for better consistency with xterm (report by Leonardo Brondani
25039 # + add 'oc' capability to xterm+256color, allowing palette reset for
25043 # + modify linux2.6 entry to improve line-drawing -TD
25044 # + make linux3.0 entry the default linux entry (Debian #823658) -TD
25047 # + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
25048 # reset palette using "oc" string as in linux -TD
25051 # + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
25052 # that could be returned -TD
25053 # + added a few capabilities fixed in recent vte -TD
25056 # + correct a typo in interix -TD
25059 # + updated minitel entries to use status line with screen(1), as well as
25060 # printing special G2 videotex chars like french accentuated glyph
25061 # using special cap XC= (patch by Alexandre Montaron).
25064 # + add linux-m1 minitel entries (patch by Alexandre Montaron).
25065 # + correct rs2 string for vt100-nam -TD
25068 # + modify linux-16color to not mask dim, standout or reverse with the
25069 # ncv capability -TD
25070 # + add 0.1sec mandatory delay to flash capabilities using the VT100
25071 # reverse-video control -TD
25072 # + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
25073 # entry, to avoid conflict with the user-defined mapping. The reset
25074 # feature will use ISO-8859-1 in any case (Mikulas Patocka).
25077 # + merge current st description (report by Harry Gindi) -TD
25080 # + modify flash capability for linux and wyse entries to put the delay
25081 # between the reverse/normal escapes rather than after -TD
25084 # + minor comment-fixes to help automate links to bug-urls -TD
25085 # + add dvtm, dvtm-256color -TD
25086 # + add settings corresponding to xterm-keys option to tmux entry to
25087 # reflect upcoming change to make that option "on" by default
25088 # (patch by Nicholas Marriott).
25089 # + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
25090 # + add dumb-emacs-ansi -TD
25093 # + correct a few spelling errors in comments -TD
25097 # + add vt100+4bsd building block, use that for older terminals rather
25098 # than "vt100" which is now mostly used as a building block for
25099 # terminal emulators -TD
25100 # + modify vt100 rs2 string to reset vt52 mode and scrolling regions
25101 # (report/analysis by Robert King) -TD
25104 # + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
25105 # + add smso for env230, to match sgr -TD
25106 # + remove p7/protect from sgr in fbterm -TD
25107 # + drop setf/setb from fbterm; setaf/setab are enough -TD
25108 # + make xterm-pcolor sgr consistent with other capabilities -TD
25109 # + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
25110 # (discussion with Nicholas Marriott)
25113 # + correct missing comma-separator between string capabilities in
25114 # icl6402 and m2-nam -TD
25115 # + update formatting with ncurses 6.0.20170422 -TD
25116 # + restore rmir/smir in ansi+idc to better match original ansiterm+idc,
25117 # add alias ansiterm (report by Robert King).
25120 # + reformatted using hexadecimal numbers to improve readability -TD
25122 ######## SHANTIH! SHANTIH! SHANTIH!