ncurses 5.4

[ncurses.git] / misc / terminfo.src

######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
#
# This version of terminfo.src is distributed with ncurses.
# Report bugs and new terminal descriptions to
#       bug-ncurses@gnu.org
#
#       $Revision: 1.227 $
#       $Date: 2004/01/18 01:37:18 $
#
# The original header is preserved below for reference.  It is noted that there
# is a newer version which differs in some cosmetic details; we have decided
# to not change the header unless there is also a change in content.
#
#------------------------------------------------------------------------------
#       Version 10.2.1
#       terminfo syntax
#
#       Eric S. Raymond         (current maintainer)
#       John Kunze, Berkeley
#       Craig Leres, Berkeley
#
# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
# address is no longer valid.  The latest version can always be found at
# <http://www.tuxedo.org/terminfo>.
#
# PURPOSE OF THIS FILE:
#
# This file describes the capabilities of various character-cell terminals,
# as needed by software such as screen-oriented editors.
#
# Other terminfo and termcap files exist, supported by various OS vendors
# or as relics of various older versions of UNIX.  This one is the longest
# and most comprehensive one in existence.  It subsumes not only the entirety
# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
# termcap file, but also large numbers of vendor-maintained termcap and
# terminfo entries more complete and carefully tested than those in historical
# termcap/terminfo versions.
#
# Pointers to related resources (including the ncurses distribution) may
# be found at <http://www.tuxedo.org/terminfo>.
#
# INTERNATIONALIZATION:
#
# This file uses only the US-ASCII character set (no ISO8859 characters).
#
# This file assumes a US-ASCII character set. If you need to fix this, start
# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
# for your character set.  \E(A and \E)A enables the British character set
# with the pound sign at position 2/3.  
#
# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
# C1 characters are considered the first-byte set of the Japanese encodings,
# so \E)0 should be avoided in <enacs> and initialization strings.
#
# FILE FORMAT:
#
# The version you are looking at may be in any of three formats: master
# (terminfo with OT capabilities), stock terminfo, or termcap.  You can tell
# which by the format given in the header above.
#
# The master format is accepted and generated by the terminfo tools in the
# ncurses suite; it differs from stock (System V-compatible) terminfo only
# in that it admits a group of capabilities (prefixed `OT') equivalent to
# various obsolete termcap capabilities.  You can, thus, convert from master
# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
# you have ncurses `tic -I' is nicer (among other things, it automatically
# outputs entries in a canonical form).
#
# The termcap version is generated automatically from the master version
# using tic -C.  This filtering leaves in the OT capabilities under their
# original termcap names.  All translated entries fit within the 1023-byte
# string-table limit of archaic termcap libraries except where explicitly
# noted below.  Note that the termcap translation assumes that your termcap
# library can handle multiple tc capabilities in an entry. 4.4BSD has this
# capability.  Older versions of GNU termcap, through 1.3, do not. 
#
# For details on these formats, see terminfo(5) in the ncurses distribution,
# and termcap(5) in the 4.4BSD Unix Programmer's Manual.  Be aware that 4.4BSD
# curses has been declared obsolete by the caretakers of the 4.4BSD sources
# as of June 1995; they are encouraging everyone to migrate to ncurses.
#
# Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
# no entry in this file has embedded comments.  This is so source translation
# to termcap only has to carry over leading comments.  Also, no name field
# contains embedded whitespace (such whitespace confuses rdist).
#
# Further note: older versions of this file were often installed with an editor
# script (reorder) that moved the most common terminal types to the front of
# the file.  This should no longer be necessary, as the file is now ordered
# roughly by type frequency with ANSI/VT100 and other common types up front.
#
# Some information has been merged in from terminfo files distributed by
# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below).  Much information
# comes from vendors who maintain official terminfos for their hardware
# (notably DEC and Wyse).
#
# A detailed change history is included at the end of this file.
#
# FILE ORGANIZATION:
#
# Comments in this file begin with # - they cannot appear in the middle
# of a terminfo/termcap entry (this feature had to be sacrificed in order
# to allow standard terminfo and termcap syntax to be generated cleanly from
# the master format).  Individual capabilities are commented out by
# placing a period between the colon and the capability name.
#
# The file is divided up into major sections (headed by lines beginning with 
# the string "########") and minor sections (beginning with "####"); do
#
#       grep "^####" <file> | more
#
# to see a listing of section headings.  The intent of the divisions is
# (a) to make it easier to find things, and (b) to order the database so
# that important and frequently-encountered terminal types are near the
# front (so that you'll get reasonable search efficiency from a linear
# search of the termcap form even if you don't use reorder).  Minor sections
# usually correspond to manufacturers or standard terminal classes. 
# Parenthesized words following manufacturer names are type prefixes or
# product line names used by that manufacturers.
#
# HOW TO READ THE ENTRIES:
#
# The first name in an entry is the canonical name for the model or
# type, last entry is a verbose description.  Others are mnemonic synonyms for
# the terminal.
#
# Terminal names look like <manufacturer> <model> - <modes/options>
# The part to the left of the dash, if a dash is present, describes the
# particular hardware of the terminal.  The part to the right may be used
# for flags indicating special ROMs, extra memory, particular terminal modes,
# or user preferences.
#
# All names should be in lower case, for consistency in typing.
#
# The following are conventionally used suffixes:
#       -2p     Has two pages of memory.  Likewise 4p, 8p, etc.
#       -am     Enable auto-margin.
#       -m      Monochrome.  Suppress color support
#       -mc     Magic-cookie.  Some terminals (notably older Wyses) can
#               only support one attribute without magic-cookie lossage.
#               Their base entry is usually paired with another that
#               uses magic cookies to support multiple attributes.
#       -nam    No auto-margin - suppress <am> capability
#       -nl     No labels - suppress soft labels
#       -ns     No status line - suppress status line
#       -rv     Terminal in reverse video mode (black on white)
#       -s      Enable status line.
#       -vb     Use visible bell (<flash>) rather than <bel>.
#       -w      Wide - in 132 column mode.
# If a name has multiple suffixes and one is a line height, that one should 
# go first.  Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.  
# 
# Entries with embedded plus signs are designed to be included through use/tc
# capabilities, not used as standalone entries. 
#
# To avoid search clashes, some older all-numeric names for terminals have
# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
# All primary names of terminals now have alphanumeric prefixes.
#
# Comments marked "esr" are mostly results of applying the termcap-compiler
# code packaged with ncurses and contemplating the resulting error messages. 
# In many cases, these indicated obvious fixes to syntax garbled by the
# composers.  In a few cases, I was able to deduce corrected forms for garbled
# capabilities by looking at context.  All the information in the original
# entries is preserved in the comments.
#
# In the comments, terminfo capability names are bracketed with <> (angle
# brackets).  Termcap capability names are bracketed with :: (colons).
#
# INTERPRETATION OF USER CAPABILITIES
#
# The System V Release 4 and XPG4 terminfo format defines ten string
# capabilities for use by applications, <u0>...<u9>.   In this file, we use
# certain of these capabilities to describe functions which are not covered
# by terminfo.  The mapping is as follows:
#
#       u9      terminal enquire string (equiv. to ANSI/ECMA-48 DA)
#       u8      terminal answerback description
#       u7      cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
#       u6      cursor position report (equiv. to ANSI/ECMA-48 CPR)
#
# The terminal enquire string <u9> should elicit an answerback response
# from the terminal.  Common values for <u9> will be ^E (on older ASCII
# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
#
# The cursor position request (<u7>) string should elicit a cursor position
# report.  A typical value (for VT100 terminals) is \E[6n.
#
# The terminal answerback description (u8) must consist of an expected
# answerback string.  The string may contain the following scanf(3)-like
# escapes:
#
#       %c      Accept any character
#       %[...]  Accept any number of characters in the given set
#
# The cursor position report (<u6>) string must contain two scanf(3)-style 
# %d format elements.  The first of these must correspond to the Y coordinate
# and the second to the %d.  If the string contains the sequence %i, it is
# taken as an instruction to decrement each value after reading it (this is
# the inverse sense from the cup string).  The typical CPR value is
# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
#
# These capabilities are used by tack(1m), the terminfo action checker
# (distributed with ncurses 5.0).
#
# TABSET FILES
#
# All the entries in this file have been edited to assume that the tabset
# files directory is /usr/share/tabset, in conformance with the File Hierarchy
# Standard for Linux and open-source BSD systems.  Some vendors (notably Sun)
# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.  
#
# No curses package we know of actually uses these files.  If their location
# is an issue, you will have to hand-patch the file locations before compiling
# this file.
# 
# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
#
# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
# character-cell terminals are increasingly replaced by X displays, much of
# this file is becoming a historical document (this is part of the reason for
# the new organization, which puts ANSI types, xterm, Unix consoles,
# and vt100 up front in confidence that this will catch 95% of new hardware).
#
# For the terminal types still alive, I'd like to have manufacturer's
# contact data (Internet address and/or snail-mail + phone).
#
# I'm also interested in enriching the comments so that the latter portions of
# the file do in fact become a potted history of VDT technology as seen by
# UNIX hackers.  Ideally, I'd like the headers for each manufacturer to
# include its live/dead/out-of-the-business status, and for as many
# terminal types as possible to be tagged with information like years
# of heaviest use, popularity, and interesting features.
#
# I'm especially interested in identifying the obscure entries listed under
# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
# wisdom about them gets lost.  If you know a lot about obscure old terminals,
# please go to the terminfo resource page, grab the UFO file (ufo.ti), and 
# eyeball it for things you can identify and describe. 
#
# If you have been around long enough to contribute, please read the file
# with this in mind and send me your annotations.
#
# COPYRIGHTS AND OTHER DELUSIONS
#
# The BSD ancestor of this file had a standard Regents of the University of
# California copyright with dates from 1980 to 1993.
#
# Some information has been merged in from a terminfo file SCO distributes.
# It has an obnoxious boilerplate copyright which I'm ignoring because they 
# took so much of the content from the ancestral BSD versions of this file
# and didn't attribute it, thereby violating the BSD Regents' copyright.
#
# Not that anyone should care.  However many valid functions copyrights may
# serve, putting one on a termcap/terminfo file with hundreds of anonymous
# contributors makes about as much sense as copyrighting a wall-full of
# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
#
# This file deliberately has no copyright.  It belongs to no one and everyone.
# If you claim you own it, you will merely succeed in looking like a fool. 
# Use it as you like.  Use it at your own risk.  Copy and redistribute freely.
# There are no guarantees anywhere.  Svaha!
#

######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
#
# This section describes terminal classes and brands that are still
# quite common.
#

#### Specials
#
# Special "terminals".  These are used to label tty lines when you don't
# know what kind of terminal is on it.  The characteristics of an unknown
# terminal are the lowest common denominator - they look about like a ti 700.
#

dumb|80-column dumb tty, 
        am, 
        cols#80, 
        bel=^G, cr=^M, cud1=^J, ind=^J, 
unknown|unknown terminal type, 
        gn, use=dumb, 
lpr|printer|line printer, 
        OTbs, hc, os, 
        cols#132, lines#66, 
        bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J, 
glasstty|classic glass tty interpreting ASCII control characters, 
        OTbs, am, 
        cols#80, 
        bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H, 
        kcud1=^J, nel=^M^J, .kbs=^H, 

vanilla, 
        OTbs, 
        bel=^G, cr=^M, cud1=^J, ind=^J, 

#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
#
# See the end-of-file comment for more on these.
#

# ANSI capabilities are broken up into pieces, so that a terminal
# implementing some ANSI subset can use many of them.
ansi+local1, 
        cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 
ansi+local, 
        cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 
        cuu=\E[%p1%dA, use=ansi+local1, 
ansi+tabs, 
        cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g, 
ansi+inittabs, 
        it#8, use=ansi+tabs, 
ansi+erase, 
        clear=\E[H\E[J, ed=\E[J, el=\E[K, 
ansi+rca, 
        hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd, 
ansi+cup, 
        cup=\E[%i%p1%d;%p2%dH, home=\E[H, 
ansi+rep, 
        rep=%p1%c\E[%p2%{1}%-%db, 
ansi+idl1, 
        dl1=\E[M, il1=\E[L, 
ansi+idl, 
        dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1, 
ansi+idc, 
        dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6, 
ansi+arrows, 
        kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        khome=\E[H, 
ansi+sgr|ansi graphic renditions, 
        blink=\E[5m, invis=\E[8m, rev=\E[7m, sgr0=\E[0m, 
ansi+sgrso|ansi standout only, 
        rmso=\E[m, smso=\E[7m, 
ansi+sgrul|ansi underline only, 
        rmul=\E[m, smul=\E[4m, 
ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim, 
        bold=\E[1m, 
        sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 
        use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 
ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold, 
        dim=\E[2m, 
        sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m, 
        use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 
ansi+pp|ansi printer port, 
        mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 
ansi+csr|ansi scroll-region plus cursor save & restore, 
        csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7, 

# The IBM PC alternate character set.  Plug this into any Intel console entry.
# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
# ROM graphics for control characters such as the diamond, up- and down-arrow.
# This works with the System V, Linux, and BSDI consoles.  It's a safe bet this
# will work with any Intel console, they all seem to have inherited \E[11m
# from the ANSI.SYS de-facto standard.
klone+acs|alternate character set for ansi.sys displays, 
        acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 
        rmacs=\E[10m, smacs=\E[11m, 

# Highlight controls corresponding to the ANSI.SYS standard.  Most 
# console drivers for Intel boxes obey these.  Makes the same assumption
# about \E[11m as klone+acs.  True ANSI/ECMA-48 would have <rmso=\E[27m>,
# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
klone+sgr|attribute control for ansi.sys displays, 
        blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, 
        rmpch=\E[10m, rmso=\E[m, rmul=\E[m, 
        sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 
        sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m, 
        use=klone+acs, 

# Highlight controls corresponding to the ANSI.SYS standard.  *All*
# console drivers for Intel boxes obey these.  Does not assume \E[11m will
# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
# diamond and arrow characters under curses.
klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m), 
        blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m, 
        rmul=\E[m, 
        sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 
        sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 
        use=klone+acs, 

# KOI8-R (RFC1489) acs (alternate character set)
# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset, 
        acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225, 
        rmacs=\E[10m, smacs=\E[11m, 

# ANSI.SYS color control.  The setab/setaf caps depend on the coincidence
# between SVr4/XPG4's color numbers and ANSI.SYS attributes.  Here are longer
# but equivalent strings that don't rely on that coincidence:
# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
# They match a subset of ECMA-48.
klone+color|color control for ansi.sys and ISO6429-compatible displays, 
        colors#8, ncv#3, pairs#64, 
        op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 

# This is better than klone+color, it doesn't assume white-on-black as the
# default color pair,  but many `ANSI' terminals don't grok the <op> cap.
ecma+color|color control for ECMA-48-compatible terminals, 
        AX, 
        colors#8, ncv#3, pairs#64, 
        op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 

# Attribute control for ECMA-48-compatible terminals
ecma+sgr|attribute capabilities for true ECMA-48 terminals, 
        rmso=\E[27m, rmul=\E[24m, use=klone+sgr, 

# For comparison, here are all the capabilities implied by the Intel
# Binary Compatibility Standard (level 2) that fit within terminfo.
# For more detail on this rather pathetic standard, see the comments
# near the end of this file.
ibcs2|Intel Binary Compatibility Standard prescriptions, 
        cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB, 
        cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 
        dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX, 
        hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 
        indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7, 
        smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd, 

#### ANSI/ECMA-48 terminals and terminal emulators
#
# See near the end of this file for details on ANSI conformance.
# Don't mess with these entries!  Lots of other entries depend on them!
#
# This section lists entries in a least-capable to most-capable order.
# if you're in doubt about what `ANSI' matches yours, try them in that
# order and back off from the first that breaks.

# ansi-mr is for ANSI terminals with ONLY relative cursor addressing
# and more than one page of memory.  It uses local motions instead of
# direct cursor addressing, and makes almost no assumptions. It does
# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
ansi-mr|mem rel cup ansi, 
        am, xon, 
        cols#80, lines#24, use=vanilla, use=ansi+erase, 
        use=ansi+local1, 

# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but 
# beware of screen size problems and memory relative cursor addressing.
ansi-mini|any ansi terminal with pessimistic assumptions, 
        am, xon, 
        cols#80, lines#24, use=vanilla, use=ansi+cup, 
        use=ansi+erase, 

# ansi-mtabs adds relative addressing and minimal tab support 
ansi-mtabs|any ansi terminal with pessimistic assumptions, 
        it#8, 
        ht=^I, use=ansi+local1, use=ansi-mini, 

# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
#
# The following is an entry for the full ANSI 3.64 (1977).  It lacks
# padding, but most terminals using the standard are "fast" enough
# not to require any -- even at 9600 bps.  If you encounter problems,
# try including the padding specifications.
#
# Note: the :as: and :ae: specifications are not implemented here, for
# the available termcap documentation does not make clear WHICH alternate
# character set to specify.  ANSI 3.64 seems to make allowances for several.
# Please make the appropriate adjustments to fit your needs -- that is
# if you will be using alternate character sets.
#
# There are very few terminals running the full ANSI 3.64 standard,
# so I could only test this entry on one verified terminal (Visual 102).
# I would appreciate the results on other terminals sent to me.
#
# Please report comments, changes, and problems to:
#
# U.S. MAIL:   Hugh Hansard
#              Box: 22830
#              Emory University
#              Atlanta, GA. 30322.
#
# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
#
# (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
ansi77|ansi 3.64 standard 1977 version, 
        OTbs, am, mir, 
        cols#80, it#8, lines#24, 
        bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
        cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
        cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, 
        home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, 
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 
        kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, 
        rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h, 
        smso=\E[7m, smul=\E[4m, 

# Procomm and some other ANSI emulations don't recognize all of the ANSI-
# standard capabilities.  This entry deletes <cuu>, <cuf>, <cud>, <cub>, and 
# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>, 
# <cuf1>, <cud1> and <cub1>.  Also deleted <ich> and <ich1>, as QModem up to 
# 5.03 doesn't recognize these.  Finally, we delete <rep> and <ri>, which seem
# to confuse many emulators.  On the other hand, we can count on these programs
# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured 
# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
# ANSI.SYS influence.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode), 
        OTbs, am, mir, msgr, 
        cols#80, it#8, lines#24, 
        bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D, 
        cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
        dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 
        hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 
        kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g, 
        use=klone+sgr-dumb, 
pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode), 
        lines#25, use=pcansi-m, 
pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode), 
        lines#33, use=pcansi-m, 
pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode), 
        lines#43, use=pcansi-m, 
# The color versions.  All PC emulators do color...
pcansi|ibm-pc terminal programs claiming to be ansi, 
        use=klone+color, use=pcansi-m, 
pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines, 
        lines#25, use=pcansi, 
pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines, 
        lines#33, use=pcansi, 
pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines, 
        lines#43, use=pcansi, 

# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
# If you want pound signs rather than dollars, replace `B' with `A'
# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes, 
        mc5i, 
        cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 
        cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM, 
        ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I, 
        ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H, 
        kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, 
        rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B, 
        s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g, 
        vpa=\E[%i%p1%dd, use=pcansi-m, 

# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
# standard terminfo.  Assumes ANSI.SYS-compatible attributes and color.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
ansi|ansi/pc-term compatible with color, 
        u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c, 
        u9=\E[c, use=ecma+color, use=klone+sgr, use=ansi-m, 

# ansi-generic is a vanilla ANSI terminal. This is assumed to implement 
# all the normal ANSI stuff with no extensions. It assumes 
# insert/delete line/char is there, so it won't work with 
# vt100 clones. It assumes video attributes for bold, blink, 
# underline, and reverse, which won't matter much if the terminal 
# can't do some of those. Padding is assumed to be zero, which 
# shouldn't hurt since xon/xoff is assumed.
ansi-generic|generic ansi standard terminal, 
        am, xon, 
        cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup, 
        use=ansi+rca, use=ansi+erase, use=ansi+tabs, 
        use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep, 
        use=ansi+sgrbold, use=ansi+arrows, 

#### DOS ANSI.SYS variants
#
# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
# documentation (except for the keyboard key reassignment feature, which
# doesn't fit the <pfkey> model well).  The klone+acs sequences were valid
# though undocumented.  The <pfkey> capability is untested but should work for
# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
ansi.sys-old|ANSI.SYS under PC-DOS 2.1, 
        OTbs, am, mir, msgr, xon, 
        cols#80, lines#25, 
        clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H, 
        is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 
        khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u, 
        rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR, 
        u7=\E[6n, use=klone+color, use=klone+sgr, 
ansi.sys|ANSI.SYS 3.1 and later versions, 
        el=\E[K, use=ansi.sys-old, 

#
# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
# This should only be used when the terminal emulator cannot redefine the keys.
# Since redefining keys with ansi.sys also affects PC-DOS programs, the key
# definitions must be restored.  If the terminal emulator is quit while in vi
# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
# (^U and ^D are already defined for tn3270).  The ESC is safe for vi but it
# does "beep".  ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
# Note that <kcub1> is always BS, because PC-dos can tolerate this change.
# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
# Consequently the End keypad key could not be set (it is relatively safe and
# actually useful because it sends ^@ O, which beeps and opens a line above).
ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi, 
        is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, 
        rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p, 
        smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p, 
        use=ansi.sys, 
#
# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS, 
        dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 
        is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, 
        use=ansi.sys, 
#
# See ansi.sysk and nansi.sys above.
nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi, 
        dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 
        is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, 
        use=ansi.sysk, 

#### ANSI console types
#

#### BeOS
#
# BeOS entry for Terminal program Seems to be almost ANSI
beterm|BeOS Terminal, 
        am, eo, mir, msgr, xenl, xon, 
        colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64, 
        bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
        ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, 
        hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 
        il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, 
        kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 
        kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~, 
        kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 
        kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~, 
        khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, 
        nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, 
        rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7, 
        setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 
        setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm, 
        sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m, 
        smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, 
        vpa=\E[%i%p1%dd, 

#### Linux consoles
#

# This entry is good for the 1.2.13 or later version of the Linux console.
#
# ***************************************************************************
# *                                                                         *
# *                           WARNING:                                      *
# * Linuxes come with a default keyboard mapping kcbt=^I.  This entry, in   *
# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
# * character. Here are the keymap replacement lines that will set this up: *
# *                                                                         *
#       keycode  15 = Tab             Tab
#               alt     keycode  15 = Meta_Tab
#               shift   keycode  15 = F26
#       string F26 ="\033[Z"
# *                                                                         *
# * This has to use a key slot which is unfortunate (any unused one will    *
# * do, F26 is the higher-numbered one).  The change ought to be built      *
# * into the kernel tables.                                                 *
# *                                                                         *
# ***************************************************************************
#
# This entry is good for the 1.2.13 or later version of the Linux console.
#
# ***************************************************************************
# *                                                                         *
# *                           WARNING:                                      *
# * Linuxes come with a default keyboard mapping kcbt=^I.  This entry, in   *
# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
# * character. Here are the keymap replacement lines that will set this up: *
# *                                                                         *
#       keycode  15 = Tab             Tab
#               alt     keycode  15 = Meta_Tab
#               shift   keycode  15 = F26
#       string F26 ="\033[Z"
# *                                                                         *
# * This has to use a key slot which is unfortunate (any unused one will    *
# * do, F26 is the higher-numbered one).  The change ought to be built      *
# * into the kernel tables.                                                 *
# *                                                                         *
# ***************************************************************************
#
# All linux kernels since 1.2.13 (at least) set the screen size
# themselves; this entry assumes that capability.
#
linux-basic|linux console, 
        am, bce, eo, mir, msgr, xenl, xon, 
        it#8, ncv#18, 
        acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 
        bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
        cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
        cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 
        dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 
        el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, 
        hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 
        il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177, 
        kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 
        kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 
        kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 
        kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 
        kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
        khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 
        kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, 
        rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, 
        sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 
        smir=\E[4h, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, 
        u7=\E[6n, u8=\E[?6c, u9=\E[c, vpa=\E[%i%p1%dd, 
        use=klone+sgr, use=ecma+color, 

linux-m|Linux console no color, 
        colors@, pairs@, 
        setab@, setaf@, setb@, setf@, use=linux, 

# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
# and it matters, turn off <ccc>.  The %02x escape used to implement this is
# not supposedly back-portable to older SV curses (although it has worked fine
# on Solaris for several years) and not supported in ncurses versions before
# 1.9.9.
linux-c-nc|linux console with color-change, 
        ccc, 
        initc=\E]P%p1%x%p2%{256}%*%{1000}%/%02x%p3%{256}%*%{1000}%/%02x%p4%{256}%*%{1000}%/%02x, 
        oc=\E]R, use=linux-basic, 
# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
linux-c|linux console 1.3.6+ for older ncurses, 
        ccc, 
        initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;, 
        oc=\E]R, use=linux-basic, 

# The 2.2.x kernels add a private mode that sets the cursor type; use that to
# get a block cursor for cvvis.
# reported by Frank Heckenbach <frank@g-n-u.de>.
linux|linux console, 
        civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c, 
        cvvis=\E[?25h\E[?8c, use=linux-c-nc, 

# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
linux-nic|linux with ich/ich1 suppressed for non-curses programs, 
        ich@, ich1@, use=linux, 

# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
linux-koi8|linux with koi8 alternate character set, 
        acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224, 
        use=linux, use=klone+koi8acs, 

# Another entry for KOI8-r with Qing Long's acsc.
# (which one better complies with the standard?)
linux-koi8r|linux with koi8-r alternate character set, 
        use=linux, use=klone+koi8acs, 

# Entry for the latin1 and latin2 fonts
linux-lat|linux with latin1 or latin2 alternate character set, 
        acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376, 
        use=linux, 

# This uses graphics from VT codeset instead of from cp437.
# reason: cp437 (aka "straight to font") is not functional under luit.
# from: Andrey V Lukyanov <land@long.yar.ru>.
linux-vt|linux console using VT codes for graphics, 
        acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, 
        rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0, 
        smpch@, use=linux, 

#### Mach
#

# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
mach|Mach Console, 
        am, km, 
        cols#80, it#8, lines#25, 
        bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, 
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 
        cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
        cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
        el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, 
        kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ, 
        kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 
        kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U, 
        kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m, 
        smso=\E[7m, smul=\E[4m, 
mach-bold|Mach Console with bold instead of underline, 
        rmul=\E[0m, smul=\E[1m, use=mach, 
mach-color|Mach Console with ANSI color, 
        colors#8, pairs#64, 
        dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m, 
        setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach, 

#### OSF Unix
#

# OSF/1 1.1 Snapshot 2
pmcons|pmconsole|PMAX console, 
        am, 
        cols#128, lines#57, 
        bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I, 
        ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 

# SCO console and SOS-Syscons console for 386bsd
# (scoansi: had unknown capabilities
#       :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
#       :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
#       :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
#       :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
#       :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
# on the <smacs>=\E[12m  -- esr)
#
# klone+sgr-dumb is an error since the acsc does not match -TD
#
# In this description based on SCO's keyboard(HW) manpage list of default
# function key values:
#       F13-F24 are shifted F1-F12
#       F25-F36 are control F1-F12
#       F37-F48 are shift+control F1-F12
#
# hpa/vpa work in the console, but not in scoterm:
#       hpa=\E[%p1%dG,
#       vpa=\E[%p1%dd,
#
# SCO's terminfo uses
#       kLFT=\E[d,
#       kRIT=\E[c,
# which do not work (console or scoterm).
#
# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
scoansi-old|SCO Extended ANSI standard crt (5.0.5), 
        OTbs, am, bce, eo, xon, 
        colors#8, cols#80, it#8, lines#25, pairs#64, 
        acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207, 
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 
        civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C, 
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 
        cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
        cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP, 
        dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M, 
        ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I, 
        hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 
        ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H, 
        kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 
        kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, 
        kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, 
        kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, 
        kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, 
        kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, 
        kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, 
        kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], 
        kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, 
        kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 
        kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, 
        rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, 
        rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, 
        setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, 
        smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, 
scoansi-new|SCO Extended ANSI standard crt (5.0.6), 
        km, 
        civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr, 
        cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m, 
        rep=\E[%p1%d;%p2%db, rmm=\E[=11L, 
        sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 
        smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm, 
        smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m, 
        smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m, 
        smgtp=\E[=0;%i%p1%dm, smm=\E[=10L, 
        wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr, 
        use=scoansi-old, 
# make this easy to change...
scoansi|SCO Extended ANSI standard crt, 
        use=scoansi-old, 

# This actually describes the generic SVr4 display driver for Intel boxes.
# The <dim=\E[2m> isn't documented and therefore may not be reliable.
# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
att6386|at386|386at|AT&T WGS 6386 console, 
        am, bw, eo, xon, 
        cols#80, it#8, lines#25, 
        acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C, 
        clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD, 
        cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 
        cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 
        cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 
        dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 
        home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 
        ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, 
        indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H, 
        kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, 
        kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 
        kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, 
        knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m, 
        ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, 
        sc=\E7, 
        sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m, 
        sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 
        tbc=\E[2g, vpa=\E[%i%p1%dd, use=klone+color, 
# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
pc6300plus|AT&T 6300 plus, 
        OTbs, am, xon, 
        cols#80, lines#24, 
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C, 
        clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B, 
        cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, 
        dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, 
        home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J, 
        invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
        kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe, 
        kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk, 
        nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 
        smso=\E[7m, smul=\E[4m, tbc=\E[3g, 

# From: Benjamin C. W. Sittler <bsittler@nmt.edu>
#
# I have a UNIX PC which I use as a terminal attached to my Linux PC.
# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
# is broken. All the special key sequences are broken, making it unusable
# with Emacs. The problem stems from the following:
# 
# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
# keypad!), loadable fonts, and strange highlighting modes ("dithered"
# half-intensity, "smeared" bold, and real strike-out, for example.) It also
# uses resizable terminal windows, but the bundled terminal program always
# uses an 80x24 window (and doesn't support seem to support a 132-column
# mode.) 
# 
# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
# library which was a superset of SVr3.5 curses (called tam, for "terminal
# access method".) tam includes support for real, overlapping windows,
# onscreen function key labels, and bitmap graphics. But since the primary
# user interface on the UNIX PC was a GUI program (ua, for "user
# assistant",) and remote administration was considered important for the
# machine, tam also supported VT100-compatible terminals attached to the
# serial port or used across the StarLan network. To simulate the extra keys
# not present on a VT100, users could press ESC and a two-letter sequence,
# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
# however, were not the same as those sent by the actual Undo key. The
# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
# (If you're interested in adding some of the tam calls to ncurses, btw, I
# have the full documentation and several programs which use tam. It also
# used an extended terminfo format to describe key sequences, special
# highlighting modes, etc.) 
# 
# KEYS: This means that ncurses would quite painful on the UNIX PC, since
# there are two sequences for every key-modifier combination (local keyboard
# sequence and remote "VT100" sequence.) But I doubt many people are trying
# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) 
# seem to have been built from the manual describing the VT100 sequences. 
# This means it doesn't work for a real live UNIX PC. 
# 
# FONTS: The UNIX PC also has a strange interpretation of "alternate
# character set". Rather than the VT100 graphics you might expect, it allows
# up to 8 custom fonts to be loaded at any given time. This means that
# programs expecting VT100 graphics will usually be disappointed. For this
# reason I have disabled the smacs/rmacs sequences, but they could easily be
# re-enabled. Here are the relevant control sequences (from the ESCAPE(7) 
# manpage), should you wish to do so: 
# 
# SGR10 - Select font 0 - ESC [ 10 m or SO
# SGR11 - Select font 1 - ESC [ 11 m or SI
# SGR12 - Select font 2 - ESC [ 12 m
# ... (etc.)
# SGR17 - Select font 7 - ESC [ 17 m
# 
# Graphics for line drawing are not reliably found at *any* character
# location because the UNIX PC has dynamically reloadable fonts. I use font
# 0 for regular text and font 1 for italics, but this is by no means
# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
# 
# MISC: The cursor visible/cursor invisible sequences were swapped in the
# distributed terminfo.
# 
# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
# the UNIX PC terminfo entry. The modified version works great with Lynx,
# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
# attached by serial cable. In Emacs, even the Undo key works, and many
# applications can now use the F1-F8 keys. 
# 
# esr's notes:
#       Terminfo entry for the AT&T Unix PC 7300
#       from escape(7) in Unix PC 7300 Manual.
#       Somewhat similar to a vt100-am (but different enough
#       to redo this from scratch.)
#
#       /***************************************************************
#       *
#       *           FONT LOADING PROGRAM FOR THE UNIX PC
#       *
#       *     This routine loads a font defined in the file ALTFONT
#       *     into font memory slot #1.  Once the font has been loaded,
#       *     it can be used as an alternative character set.
#       *
#       *     The call to ioctl with the argument WIOCLFONT is the key 
#       *     to this routine.  For more information, see window(7) in 
#       *     the PC 7300 documentation.
#       ***************************************************************/
#       #include <string.h>             /* needed for strcpy call */
#       #include <sys/window.h>         /* needed for ioctl call */
#       #define FNSIZE  60              /* font name size */
#       #define ALTFONT  "/usr/lib/wfont/special.8.ft"  /* font file */
#       /*
#       *     The file /usr/lib/wfont/special.8.ft comes with the
#       *     standard PC software.  It defines a graphics character set
#       *     similar to that of the Teletype 5425 terminal.  To view
#       *     this or other fonts in /usr/lib/wfont, use the command
#       *     cfont <filename>.  For further information on fonts see
#       *     cfont(1) in the PC 7300 documentation.
#       */
#       
#       struct altfdata         /* structure for alt font data */
#       {
#       short   altf_slot;              /* memory slot number */
#       char    altf_name[FNSIZE];      /* font name (file name) */
#       };
#       ldfont()
#       {
#               int wd;         /* window in which altfont will be */
#               struct altfdata altf;
#               altf.altf_slot=1;
#               strcpy(altf.altf_name,ALTFONT);
#               for (wd =1; wd < 12; wd++) {
#                    ioctl(wd, WIOCLFONT,&altf);
#               }
#       }
#
# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
# they're confirmed by the man page for the System V display---esr)
#
att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300, 
        am, xon, 
        cols#80, it#8, lines#24, 
        bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C, 
        clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, 
        cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 
        cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 
        cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 
        ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL, 
        il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB, 
        kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, 
        kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, 
        kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, 
        kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, 
        kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z, 
        kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, 
        ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd, 
        kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 
        kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B, 
        kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv, 
        kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, 
        kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB, 
        ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM, 
        rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m, 
        smul=\E[4m, 

# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
# from SGI's terminfo database.  SGI's entry shows F9-F12 with the codes
# for the application keypad mode.  We have added iris-ansi-ap rather than
# change the original to keypad mode.
#
# (iris-ansi: added rmam/smam based on init string -- esr)
#
# This entry, and those derived from it, is used in xwsh (also known as
# winterm).  Some capabilities that do not fit into the terminfo model
# include the shift- and control-functionkeys:
#
# F1-F12 generate different codes when shift or control modifiers are used.
# For example:
#       F1              \E[001q
#       shift F1        \E[013q
#       control-F1      \E[025q
#
# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
# \EOP to \EOS.  The shifted and control modifiers still do the same thing.
#
# The cursor keys also have different codes:
#       control-up      \E[162q
#       control-down    \E[165q
#       control-left    \E[159q
#       control-right   \E[168q
#
#       shift-up        \E[161q
#       shift-down      \E[164q
#       shift-left      \E[158q
#       shift-right     \E[167q
#
#       control-tab     \[072q
#
iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100), 
        am, 
        cols#80, it#8, lines#40, 
        bel=^G, bold=\E[1m, clear=\E[H\E[2J, 
        cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD, 
        cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, 
        cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 
        cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h, 
        dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 
        home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED, 
        is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P, 
        kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q, 
        kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 
        kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, 
        kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q, 
        kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, 
        kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 
        kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, 
        knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, 
        kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, 
        rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 
        sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, 
        tbc=\E[3g, 
iris-ansi-ap|IRIS ANSI in application-keypad mode, 
        is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q, 
        kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi, 

# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
# (T.Dickey 98/1/24)
iris-color|xwsh|IRIX ANSI with color, 
        ncv#33, 
        csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m, 
        ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m, 
        rmul=\E[24m, rs1=\Ec, 
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
        sitm=\E[3m, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
        use=klone+color, use=iris-ansi-ap, 

# The following is a version of the ibm-pc entry distributed with PC/IX,
# (Interactive Systems' System 3 for the Big Blue), modified by Richard
# McIntosh at UCB/CSM.  The :pt: and :uc: have been removed from the original,
# (the former is untrue, and the latter failed under UCB/man); standout and
# underline modes have been added.  Note: this entry describes the "native"
# capabilities of the PC monochrome display, without ANY emulation; most
# communications packages (but NOT PC/IX connect) do some kind of emulation.
pcix|PC/IX console, 
        am, bw, eo, 
        cols#80, lines#24, 
        clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 
        cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 
        home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, 
        smul=\E[4m, 

# (ibmpcx: this entry used to be known as ibmx.
# It formerly included the following extension capabilities:
#       :GC=b:GL=v:GR=t:RT=^J:\
#       :GH=\E[196g:GV=\E[179g:\
#       :GU=\E[193g:GD=\E[194g:\
#       :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
#       :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
#       :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
# ":kh=\E[Y:".  Added IBM-PC forms characters and highlights, they match
# what was there before. -- esr)
ibmpcx|xenix|ibmx|IBM PC xenix console display, 
        OTbs, am, msgr, 
        cols#80, lines#25, 
        clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C, 
        cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 
        ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H, 
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d, 
        kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e, 
        kpp=\E[Z, use=klone+acs, use=klone+sgr, 

#### QNX
#

# QNX 4.0 Console
# Michael's original version of this entry had <am@>, <smcup=\Ei>,
# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
# right corner without triggering a scroll.  The ncurses terminfo library can
# handle this case with the <ich1> capability, and prefers <am> for better
# optimization.  Bug: The <op> capability resets attributes.
# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
qnx|qnx4|qnx console, 
        daisy, km, mir, msgr, xhpa, xt, 
        colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, 
        acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263, 
        bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ, 
        cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 
        cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2, 
        dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee, 
        il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263, 
        kCMD=\377\267, kCPY=\377\363, kCRT=\377\364, 
        kDL=\377\366, kEND=\377\301, kEOL=\377\311, 
        kEXT=\377\367, kFND=\377\370, kHLP=\377\371, 
        kHOM=\377\260, kIC=\377\340, kLFT=\377\264, 
        kMOV=\377\306, kMSG=\377\304, kNXT=\377\272, 
        kOPT=\377\372, kPRT=\377\275, kPRV=\377\262, 
        kRDO=\377\315, kRES=\377\374, kRIT=\377\266, 
        kRPL=\377\373, kSAV=\377\307, kSPD=\377\303, 
        kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0, 
        kclo=\377\343, kclr=\377\341, kcmd=\377\245, 
        kcpy=\377\265, kcrt=\377\305, kctab=\377\237, 
        kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246, 
        kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274, 
        ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320, 
        kext=\377\270, kf1=\377\201, kf10=\377\212, 
        kf11=\377\256, kf12=\377\257, kf13=\377\213, 
        kf14=\377\214, kf15=\377\215, kf16=\377\216, 
        kf17=\377\217, kf18=\377\220, kf19=\377\221, 
        kf2=\377\202, kf20=\377\222, kf21=\377\223, 
        kf22=\377\224, kf23=\377\333, kf24=\377\334, 
        kf25=\377\225, kf26=\377\226, kf27=\377\227, 
        kf28=\377\230, kf29=\377\231, kf3=\377\203, 
        kf30=\377\232, kf31=\377\233, kf32=\377\234, 
        kf33=\377\235, kf34=\377\236, kf35=\377\276, 
        kf36=\377\277, kf37=\377\321, kf38=\377\322, 
        kf39=\377\323, kf4=\377\204, kf40=\377\324, 
        kf41=\377\325, kf42=\377\326, kf43=\377\327, 
        kf44=\377\330, kf45=\377\331, kf46=\377\332, 
        kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, 
        kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, 
        khlp=\377\350, khome=\377\240, khts=\377\342, 
        kich1=\377\253, kil1=\377\273, kind=\377\261, 
        kmov=\377\351, kmrk=\377\355, kmsg=\377\345, 
        knp=\377\252, knxt=\377\312, kopn=\377\357, 
        kopt=\377\353, kpp=\377\242, kprt=\377\255, 
        kprv=\377\302, krdo=\377\336, kref=\377\354, 
        kres=\377\360, krfr=\377\347, kri=\377\271, 
        krmir=\377\313, krpl=\377\362, krst=\377\352, 
        ksav=\377\361, kslt=\377\247, kspd=\377\335, 
        ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER, 
        rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER, 
        rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d, 
        setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei, 
        smso=\E(, smul=\E[, 
#
#
qnxt|qnxt4|QNX4 terminal, 
        crxm, use=qnx4, 
#
qnxm|QNX4 with mouse events, 
        maddr#1, 
        chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h, 
        mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l, 
        mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l, 
        smicm=\E/>2h, use=qnx4, 
#
qnxw|QNX4 windows, 
        xvpa, use=qnxm, 
#
#       Monochrome QNX4 terminal or console. Setting this terminal type will
#       allow an application running on a color console to behave as if it
#       were a monochrome terminal. Output will be through stdout instead of
#       console writes because the term routines will recognize that the
#       terminal name starts with 'qnxt'.
#
qnxtmono|Monochrome QNX4 terminal or console, 
        colors@, pairs@, 
        scp@, use=qnx4, 

# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
# (esr: commented out <scp> and <rmcup> to avoid warnings.)
# (TD: derive from original qnx4 entry)
qnxt2|qnx 2.15 serial terminal, 
        am, 
        civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@, 
        rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4, 

# QNX ANSI terminal definition
qansi-g|QNX ANSI, 
        am, eslok, hs, xon, 
        colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa, 
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 
        clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 
        cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A, 
        cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 
        dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J, 
        el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l, 
        fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 
        ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, 
        ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, 
        is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0, 
        kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt, 
        kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h, 
        kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c, 
        kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa, 
        kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B, 
        kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y, 
        kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, 
        kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt, 
        kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx, 
        kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~, 
        kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~, 
        kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~, 
        kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~, 
        kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~, 
        kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~, 
        kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU, 
        kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh, 
        khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a, 
        kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo, 
        kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg, 
        kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T, 
        ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m, 
        rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T, 
        rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m, 
        rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l, 
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 
        setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
        setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
        sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;, 
        sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m, 
        smul=\E[4m, tbc=\E[2g, 
        tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, 
#
qansi|QNX ansi with console writes, 
        daisy, xhpa, use=qansi-g, 
#
qansi-t|QNX ansi without console writes, 
        crxm, use=qansi, 
#
qansi-m|QNX ansi with mouse, 
        maddr#1, 
        chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h, 
        mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l, 
        mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l, 
        smicm=\E[>2h, use=qansi, 
#
qansi-w|QNX ansi for windows, 
        xvpa, use=qansi-m, 

#### NetBSD consoles
#
# pcvt termcap database entries (corresponding to release 3.31)
# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
#
# (For the terminfo master file, I translated these into terminfo syntax.
# Then I dropped all the pseudo-HP entries. we don't want and can't use
# the :Xs: flag. Then I split :is: into a size-independent <is1> and a
# size-dependent <is2>.  Finally, I added <rmam>/<smam> -- esr)

# NOTE: <ich1> has been taken out of this entry. for reference, it should
# be <ich1=\E[@>.  For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
pcvtXX|pcvt vt200 emulator (DEC VT220), 
        am, km, mir, msgr, xenl, 
        it#8, vt#3, 
        acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
        clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
        el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 
        il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, 
        is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177, 
        kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
        kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 
        kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 
        khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~, 
        nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, 
        ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, 
        rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 
        rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
        sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 
        smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 

#       NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
#       termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
#       50 lines entries; 80 columns
pcvt25|dec vt220 emulation with 25 lines, 
        cols#80, lines#25, 
        is2=\E[1;25r\E[25;1H, use=pcvtXX, 
pcvt28|dec vt220 emulation with 28 lines, 
        cols#80, lines#28, 
        is2=\E[1;28r\E[28;1H, use=pcvtXX, 
pcvt35|dec vt220 emulation with 35 lines, 
        cols#80, lines#35, 
        is2=\E[1;35r\E[35;1H, use=pcvtXX, 
pcvt40|dec vt220 emulation with 40 lines, 
        cols#80, lines#40, 
        is2=\E[1;40r\E[40;1H, use=pcvtXX, 
pcvt43|dec vt220 emulation with 43 lines, 
        cols#80, lines#43, 
        is2=\E[1;43r\E[43;1H, use=pcvtXX, 
pcvt50|dec vt220 emulation with 50 lines, 
        cols#80, lines#50, 
        is2=\E[1;50r\E[50;1H, use=pcvtXX, 

#       NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
#       termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
#       50 lines entries; 132 columns
pcvt25w|dec vt220 emulation with 25 lines and 132 cols, 
        cols#132, lines#25, 
        is2=\E[1;25r\E[25;1H, use=pcvtXX, 
pcvt28w|dec vt220 emulation with 28 lines and 132 cols, 
        cols#132, lines#28, 
        is2=\E[1;28r\E[28;1H, use=pcvtXX, 
pcvt35w|dec vt220 emulation with 35 lines and 132 cols, 
        cols#132, lines#35, 
        is2=\E[1;35r\E[35;1H, use=pcvtXX, 
pcvt40w|dec vt220 emulation with 40 lines and 132 cols, 
        cols#132, lines#40, 
        is2=\E[1;40r\E[40;1H, use=pcvtXX, 
pcvt43w|dec vt220 emulation with 43 lines and 132 cols, 
        cols#132, lines#43, 
        is2=\E[1;43r\E[43;1H, use=pcvtXX, 
pcvt50w|dec vt220 emulation with 50 lines and 132 cols, 
        cols#132, lines#50, 
        is2=\E[1;50r\E[50;1H, use=pcvtXX, 

#       OpenBSD implements a color variation
pcvt25-color|dec vt220 emulation with 25 lines and color, 
        cols#80, lines#25, 
        is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~, 
        kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 
        kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 
        kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~, 
        kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX, 
        use=ecma+color, 

# Terminfo entries to enable the use of the ncurses library in colour on a
# NetBSD-arm32 console (only tested on a RiscPC).
# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
# modified codes for setf/setb to setaf/setab, then to klone+color, corrected
# typo in invis - TD
arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480), 
        am, bce, msgr, xenl, xon, 
        cols#80, it#8, lines#30, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 
        clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 
        cuf=\E[%p1%dC, cuf1=\E[C$<2>, 
        cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 
        cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 
        enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, 
        invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H, 
        kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
        kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x, 
        kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v, 
        kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, 
        rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, 
        rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 
        sc=\E7, 
        sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>, 
        sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 
        smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr, 
        use=klone+color, 

arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768), 
        cols#132, lines#50, use=arm100, 

# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
# manufactured by Sharp for the Japenese market.
# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
x68k|x68k-ite|NetBSD/x68k ITE, 
        cols#96, lines#32, 
        kclr=\E[9~, khlp=\E[28~, use=vt220, 

# <tv@pobox.com>:
# Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
#
# (still unfinished, but good enough so far.)
ofcons, 
        bw, 
        cols#80, lines#30, 
        bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M, 
        cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, 
        cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 
        cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, 
        dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K, 
        flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL, 
        il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D, 
        kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P, 
        kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W, 
        kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r, 
        kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m, 
        rmso=\2330m, rmul=\2330m, 
        sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 
        sgr0=\2330m, 

# NetBSD "wscons" emulator in vt220 mode
# These are micro-minimal and probably need to be redone for real
# after the manner of the pcvt entries.
wsvt25|NetBSD wscons in 25 line DEC VT220 mode, 
        cols#80, lines#25, use=vt220, 

wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta, 
        km, 
        cols#80, lines#25, use=vt220, 

# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and 
# DECstation/pmax.
rcons|BSD rasterconsole, 
        use=sun-il, 
# Color version of above. Color currently only provided by NetBSD.
rcons-color|BSD rasterconsole with ANSI color, 
        bce, 
        colors#8, pairs#64, 
        op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons, 

# mgterm -- MGL/MGL2, MobileGear Graphic Library
# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
# -- compare with cons25w
mgterm, 
        OTbs, OTpt, am, bce, bw, eo, km, msgr, npc, 
        colors#8, cols#80, it#8, lines#18, pairs#64, 
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 
        cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM, 
        dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 
        home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 
        ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 
        indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 
        kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, 
        kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N, 
        kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, 
        kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, 
        nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, 
        rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm, 
        setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, 

#### FreeBSD console entries
#
# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
# Andrey Chernov maintains the FreeBSD termcap distributions.
#
# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
# or comment out the :cb: capability in the console entry.
#
# Alexander Lukyanov reports:
# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
# Now el1 clears not only to the line beginning, but also a large chunk
# of previous line. But there is another bug - ech does not work at all.
#

# for syscons
# common entry without semigraphics
# Bug: The <op> capability resets attributes.
# Bug? The ech and el1 attributes appear to move the cursor in some cases; for
# instance el1 does if the cursor is moved to the right margin first.  Removed
# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
#
# Setting colors turns off reverse; we cannot guarantee order, so use ncv.
# Note that this disables standout with color.
#
# The emulator sends difference strings based on shift- and control-keys,
# like scoansi:
#       F13-F24 are shifted F1-F12
#       F25-F36 are control F1-F12
#       F37-F48 are shift+control F1-F12
cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), 
        am, bce, bw, eo, msgr, npc, 
        colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, 
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 
        cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, 
        cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, 
        dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 
        hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 
        il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, kb2=\E[E, 
        kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
        kcuu1=\E[A, kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, 
        kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, 
        kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, 
        kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, 
        kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, 
        kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, 
        kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, 
        kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, 
        kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, 
        kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, 
        khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, 
        op=\E[x, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, 
        rs2=\E[x\E[m\Ec, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 
        sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, 
cons25|ansis|ansi80x25|freebsd console (25-line ansi mode), 
        acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371, 
        use=cons25w, 
cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode), 
        colors@, pairs@, 
        bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, 
        use=cons25, 
cons30|ansi80x30|freebsd console (30-line ansi mode), 
        lines#30, use=cons25, 
cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode), 
        lines#30, use=cons25-m, 
cons43|ansi80x43|freebsd console (43-line ansi mode), 
        lines#43, use=cons25, 
cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode), 
        lines#43, use=cons25-m, 
cons50|ansil|ansi80x50|freebsd console (50-line ansi mode), 
        lines#50, use=cons25, 
cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode), 
        lines#50, use=cons25-m, 
cons60|ansi80x60|freebsd console (60-line ansi mode), 
        lines#60, use=cons25, 
cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode), 
        lines#60, use=cons25-m, 
cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic, 
        acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225, 
        use=cons25w, 
cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono), 
        colors@, pairs@, 
        op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25r, 
cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines), 
        lines#50, use=cons25r, 
cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono), 
        lines#50, use=cons25r-m, 
cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines), 
        lines#60, use=cons25r, 
cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono), 
        lines#60, use=cons25r-m, 
# ISO 8859-1 FreeBSD console
cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars, 
        acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237, 
        use=cons25w, 
cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono), 
        colors@, pairs@, 
        bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, 
        use=cons25l1, 
cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines), 
        lines#50, use=cons25l1, 
cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono), 
        lines#50, use=cons25l1-m, 
cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines), 
        lines#60, use=cons25l1, 
cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono), 
        lines#60, use=cons25l1-m, 

#### 386BSD and BSD/OS Consoles
#

# This was the original 386BSD console entry (I think).  
# Some places it's named oldpc3|oldibmpc3.
# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
origpc3|origibmpc3|IBM PC 386BSD Console, 
        OTbs, am, bw, eo, xon, 
        cols#80, lines#25, 
        acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 
        bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 
        cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 
        home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
        kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x, 
        rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x, 
        smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x, 

# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
oldpc3|oldibmpc3|old IBM PC BSD/386 Console, 
        OTbs, km, 
        lines#25, 
        bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M, 
        ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 
        kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, 
        knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R, 

# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
# Note, the emulator supports many of the additional console features
# listed in the iBCS2 (e.g. character-set selection) though not all
# are described here.  This entry really ought to be upgraded.
# Also note, the console will also work with fewer lines after doing
# "stty rows NN", e.g. to use 24 lines.
# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996) 
# Bug: The <op> capability resets attributes.
bsdos-pc|IBM PC BSD/OS Console, 
        sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 
        use=bsdos-pc-nobold, 

bsdos-pc-nobold|BSD/OS PC console w/o bold, 
        use=klone+color, use=bsdos-pc-m, 

bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono, 
        OTbs, am, eo, km, xon, 
        cols#80, it#8, lines#25, 
        bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 
        il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, 
        kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, 
        kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7, 
        sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;, 
        use=klone+sgr, 

# Old names for BSD/OS PC console used in releases before 4.1. 
pc3|BSD/OS on the PC Console, 
        use=bsdos-pc-nobold, 
ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline, 
        use=bsdos-pc, 
 
# BSD/OS on the SPARC 
bsdos-sparc|Sun SPARC BSD/OS Console, 
        use=sun, 
         
# BSD/OS on the PowerPC 
bsdos-ppc|PowerPC BSD/OS Console, 
        use=bsdos-pc, 

#### DEC VT52
# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
vt52|dec vt52, 
        OTbs, 
        cols#80, it#8, lines#24, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, 
        cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 
        el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 
        kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, 

#### DEC VT100 and compatibles
#
# DEC terminals from the vt100 forward are collected here. Older DEC terminals
# and micro consoles can be found in the `obsolete' section.  More details on
# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
# found near the end of this file.
#
# Except where noted, these entries are DEC's official terminfos.
# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
# Engineering for more information.  Updated terminfos and termcaps 
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
# In October 1995 DEC sold its terminals business, including the VT and Dorio
# line and trademark, to SunRiver Data Systems.  SunRiver has since changed
# its name to Boundless Technologies; see http://www.boundless.com.
#

# NOTE:  Any VT100 emulation, whether in hardware or software, almost
# certainly includes what DEC called the `Level 1 editing extension' codes;
# only the very oldest VT100s lacked these and there probably aren't any of
# those left alive.  To capture these, use one of the VT102 entries.
#
# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
# since the cursor is left in a different position while in the
# weird state (concept at beginning of next line, vt100 at end
# of this line) so all versions of vi before 3.7 don't handle
# <xenl> right on vt100. The correct way to handle <xenl> is when
# you output the char in column 80, immediately output CR LF
# and then assume you are in column 1 of the next line. If <xenl>
# is on, am should be on too.
# 
# I assume you have smooth scroll off or are at a slow enough baud
# rate that it doesn't matter (1200? or less). Also this assumes
# that you set auto-nl to "on", if you set it off use vt100-nam 
# below.
# 
# The padding requirements listed here are guesses. It is strongly
# recommended that xon/xoff be enabled, as this is assumed here.
# 
# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the 
# tab settings are in non-volatile memory and don't need to be 
# reset upon login. Also setting the number of columns glitches 
# the screen annoyingly. You can type "reset" to get them set.
#
# The VT100 series terminals have cursor ("arrows") keys which can operate
# in two different modes: Cursor Mode and Application Mode.  Cursor Mode
# is the reset state, and is assumed to be the normal state.  Application
# Mode is the "set" state.  In Cursor Mode, the cursor keys transmit
# "Esc [ {code}" sequences, conforming to ANSI standards.  In Application
# Mode, the cursor keys transmit "Esc O <code>" sequences.  Application Mode
# was provided primarily as an aid to the porting of VT52 applications.  It is
# assumed that the cursor keys are normally in Cursor Mode, and expected that
# applications such as vi will always transmit the <smkx> string.  Therefore,
# the definitions for the cursor keys are made to match what the terminal
# transmits after the <smkx> string is transmitted.  If the <smkx> string
# is a null string or is not defined, then cursor keys are assumed to be in
# "Cursor Mode", and the cursor keys definitions should match that assumption,
# else the application may fail.  It is also expected that applications will
# always transmit the <rmkx> string to the terminal before they exit.
#
# The VT100 series terminals have an auxiliary keypad, commonly referred to as
# the "Numeric Keypad", because it is a cluster of numeric and function keys.
# The Numeric Keypad which can operate in two different modes: Numeric Mode and
# Application Mode.  Numeric Mode is the reset state, and is assumed to be
# the normal state.  Application Mode is the "set" state.  In Numeric Mode,
# the numeric and punctuation keys transmit ASCII 7-bit characters, and the 
# Enter key transmits the same as the Return key (Note: the Return key
# can be configured to send either LF (\015) or CR LF).  In Application Mode,
# all the keypad keys transmit "Esc O {code}" sequences.  The PF1 - PF4 keys
# always send the same "Esc O {code}" sequences.  It is assumed that the keypad
# is normally in Numeric Mode.  If an application requires that the keypad be
# in Application Mode then it is expected that the user, or the application,
# will set the TERM environment variable to point to a terminfo entry which has
# defined the <smkx> string to include the codes that switch the keypad into
# Application Mode, and the terminfo entry will also define function key
# fields to match the Application Mode control codes.  If the <smkx> string
# is a null string or is not defined, then the keypad is assumed to be in
# Numeric Mode.  If the <smkx> string switches the keypad into Application
# Mode, it is expected that the <rmkx> string will contain the control codes
# necessary to reset the keypad to "Normal" mode, and it is also expected that
# applications which transmit the <smkx> string will also always transmit the
# <rmkx> string to the terminal before they exit.
#
# Here's a diagram of the VT100 keypad keys with their bindings.
# The top line is the name of the key (some DEC keyboards have the keys
# labelled somewhat differently, like GOLD instead of PF1, but this is
# the most "official" name).  The second line is the escape sequence it
# generates in Application Keypad mode (where "$" means the ESC
# character).  The third line contains two items, first the mapping of
# the key in terminfo, and then in termcap.
#   _______________________________________
#  |   PF1   |   PF2   |   PF3   |   PF4   |
#  |   $OP   |   $OQ   |   $OR   |   $OS   |
#  |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
#  |    7         8         9         -    |
#  |   $Ow   |   $Ox   |   $Oy   |   $Om   |
#  |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
#  |    4    |    5    |    6    |    ,    |
#  |   $Ot   |   $Ou   |   $Ov   |   $Ol   |
#  |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
#  |    1    |    2    |    3    |         |
#  |   $Oq   |   $Or   |   $Os   |  enter  |
#  |_ka1__K1_|_kb2__K2_|_ka3__K3_|  $OM    |
#  |         0         |   .     |         |
#  |        $Op        |  $On    |         |
#  |___kc1_______K4____|_kc3__K5_|_kent_@8_|
#
# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
# terminfo guidelines.  That is a compromise used to assign the remaining
# keys on the keypad to kf5-kf0, used on older systems with legacy termcap
# support:
vt100+keypad|dec vt100 numeric keypad no fkeys, 
        ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn, 
vt100+pfkeys|dec vt100 numeric keypad, 
        kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
        use=vt100+keypad, 
vt100+fnkeys|dec vt100 numeric keypad, 
        kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, 
        kf9=\EOw, use=vt100+pfkeys, 
#
# A better adaptation to modern keyboards such as the PC's, which have a dozen
# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
# use the 5-key arrangement to model the arrow keys as suggested in the
# terminfo guidelines:
#   _______________________________________
#  |   PF1   |   PF2   |   PF3   |   PF4   |
#  |   $OP   |   $OQ   |   $OR   |   $OS   |
#  |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
#  |    7         8         9         -    |
#  |   $Ow   |   $Ox   |   $Oy   |   $Om   |
#  |_ka1__K1_|_________|_ka3__K3_|_________|
#  |    4    |    5    |    6    |    ,    |
#  |   $Ot   |   $Ou   |   $Ov   |   $Ol   |
#  |_________|_kb2__K2_|_________|_________|
#  |    1    |    2    |    3    |         |
#  |   $Oq   |   $Or   |   $Os   |  enter  |
#  |_kc1__K4_|_________|_kc3__K5_|  $OM    |
#  |         0         |   .     |         |
#  |        $Op        |  $On    |         |
#  |___________________|_________|_kent_@8_|
#
vt220+keypad|dec vt220 numeric keypad, 
        ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM, 
        kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
#
# And here, for those of you with orphaned VT100s lacking documentation, is
# a description of the soft switches invoked when you do `Set Up'.
# 
#  Scroll 0-Jump               Shifted 3   0-#
#  |      1-Smooth             |           1-British pound sign
#  | Autorepeat 0-Off          | Wrap Around 0-Off
#  | |          1-On           | |           1-On
#  | | Screen 0-Dark Bkg       | | New Line 0-Off
#  | | |      1-Light Bkg      | | |        1-On
#  | | | Cursor 0-Underline    | | | Interlace 0-Off
#  | | | |      1-Block        | | | |         1-On
#  | | | |                     | | | |
#  1 1 0 1       1 1 1 1       0 1 0 0       0 0 1 0       <--Standard Settings
#                | | | |                     | | | |
#                | | | Auto XON/XOFF 0-Off   | | | Power 0-60 Hz
#                | | |               1-On    | | |       1-50 Hz
#                | | Ansi/VT52 0-VT52        | | Bits Per Char. 0-7 Bits
#                | |           1-ANSI        | |                1-8 Bits
#                | Keyclick 0-Off            | Parity 0-Off
#                |          1-On             |        1-On
#                Margin Bell 0-Off           Parity Sense 0-Odd
#                            1-On                         1-Even
#
# The following SET-UP modes are assumed for normal operation:
#       ANSI_MODE       AUTO_XON/XOFF_ON        NEWLINE_OFF     80_COLUMNS
#       WRAP_AROUND_ON  JUMP_SCROLL_OFF
# Other SET-UP modes may be set for operator convenience or communication
# requirements; I recommend
#       AUTOREPEAT_ON   BLOCK_CURSOR    MARGIN_BELL_OFF    SHIFTED_3_#
# Unless you have a graphics add-on such as Digital Engineering's VT640
# (and even then, whenever it can be arranged!) you should set
#       INTERLACE_OFF
#
# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
vt100|vt100-am|dec vt100 (w/advanced video), 
        OTbs, am, msgr, xenl, xon, 
        cols#80, it#8, lines#24, vt#3, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 
        clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 
        cuf=\E[%p1%dC, cuf1=\E[C$<2>, 
        cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 
        cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 
        enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, 
        kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, 
        rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 
        rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
        sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 
        sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 
        smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 
        use=vt100+fnkeys, 
vt100nam|vt100-nam|vt100 no automargins, 
        am@, xenl@, use=vt100-am, 
vt100-vb|dec vt100 (w/advanced video) & no beep, 
        bel@, flash=\E[?5h\E[?5l, use=vt100, 

# Ordinary vt100 in 132 column ("wide") mode.
vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video), 
        cols#132, lines#24, 
        rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am, 
vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin), 
        cols#132, lines#14, vt@, 
        rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam, 

# vt100 with no advanced video.
vt100-nav|vt100 without advanced video option, 
        xmc#1, 
        blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m, 
        smul@, use=vt100, 
vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option), 
        cols#132, lines#14, use=vt100-nav, 

# vt100 with one of the 24 lines used as a status line.
# We put the status line on the top.
vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline, 
        eslok, hs, 
        lines#23, 
        clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr, 
        cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8, 
        fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8, 
        tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am, 

# Status line at bottom. 
# Clearing the screen will clobber status line.
vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline, 
        eslok, hs, 
        lines#23, 
        dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H, 
        tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am, 

# Most of the `vt100' emulators out there actually emulate a vt102
# This entry (or vt102-nsgr) is probably the right thing to use for
# these.  
vt102|dec vt102, 
        mir, 
        dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, 
        use=vt100, 
vt102-w|dec vt102 in wide mode, 
        cols#132, 
        rs3=\E[?3h, use=vt102, 

# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
# fail to interpret the ^O and ^N escapes properly.  Symptom: the <sgr0>
# string in the canonical vt100 entry above leaves the screen littered
# with little  snowflake or star characters (IBM PC ROM character \017 = ^O)
# after highlight turnoffs.  This entry should fix that, and even leave
# ACS support working, at the cost of making multiple-highlight changes 
# slightly more expensive.
# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes), 
        sgr@, sgr0=\E[m, use=vt102, 

# VT125 Graphics CRT.  Clear screen also erases graphics
vt125|vt125 graphics terminal, 
        clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100, 

# This isn't a DEC entry, it came from University of Wisconsin.
# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
vt131|dec vt131, 
        OTbs, am, xenl, 
        cols#80, it#8, lines#24, vt#3, 
        bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 
        clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
        cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 
        cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 
        ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 
        is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, 
        kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 
        kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, 
        rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>, 
        rmul=\E[m$<2/>, 
        rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
        sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=, 
        smso=\E[7m$<2/>, smul=\E[4m$<2/>, 

# vt132 - like vt100 but slower and has ins/del line and such.
# I'm told that <smir>/<rmir> are backwards in the terminal from the
# manual and from the ANSI standard, this describes the actual 
# terminal. I've never actually used a vt132 myself, so this 
# is untested.
#
vt132|DEC vt132, 
        xenl, 
        dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, 
        ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100, 

# This vt220 description maps F5--F9 to the second block of function keys
# at the top of the keyboard.  The "DO" key is used as F10 to avoid conflict
# with the key marked (ESC) on the vt220.  See vt220d for an alternate mapping.
# PF1--PF4 are used as F1--F4.
#
vt220-old|vt200-old|DEC VT220 in vt100 emulation mode, 
        OTbs, OTpt, am, mir, xenl, xon, 
        cols#80, lines#24, vt#3, 
        OTnl=^J, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, 
        clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 
        dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 
        if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>, 
        is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B, 
        kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, 
        kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, 
        kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, 
        khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8, 
        rev=\E[7m$<2>, rf=/usr/share/tabset/vt100, 
        ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 
        rmso=\E[27m, rmul=\E[24m, 
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 
        sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 
        smso=\E[7m, smul=\E[4m, 

# A much better description of the VT200/220; used to be vt220-8
# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
# designation to accommodate bug in pcvt -TD
vt220|vt200|dec vt220, 
        OTbs, am, mc5i, mir, msgr, xenl, xon, 
        cols#80, it#8, lines#24, vt#3, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
        ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 
        flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, 
        ich=\E[%p1%d@, if=/usr/share/tabset/vt100, 
        il=\E[%p1%dL, il1=\E[L, ind=\ED, 
        is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D, 
        kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~, 
        kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 
        kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, 
        kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 
        kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 
        khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, 
        kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, 
        mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 
        rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, 
        rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=\E(0$<2>, 
        smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
vt220-w|vt200-w|DEC vt220 in wide mode, 
        cols#132, 
        rs3=\E[?3h, use=vt220, 
vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode, 
        OTbs, am, mc5i, mir, msgr, xenl, xon, 
        cols#80, it#8, lines#24, vt#3, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M, 
        csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, 
        cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, 
        cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, 
        dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 
        ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0, 
        flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH, 
        ich=\233%p1%d@, if=/usr/share/tabset/vt100, 
        il=\233%p1%dL, il1=\233L, ind=\ED, 
        is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H, 
        kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 
        kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, 
        kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~, 
        kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS, 
        kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~, 
        kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~, 
        knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1, 
        lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, 
        nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, 
        rmir=\2334l, rmso=\23327m, rmul=\23324m, rs1=\233?3l, 
        sc=\E7, sgr0=\233m, smacs=^N, smam=\233?7h, smir=\2334h, 
        smso=\2337m, smul=\2334m, tbc=\2333g, 

#
# vt220d:
# This vt220 description regards F6--F10 as the second block of function keys
# at the top of the keyboard.  This mapping follows the description given
# in the VT220 Programmer Reference Manual and agrees with the labeling
# on some terminals that emulate the vt220.  There is no support for an F5.
# See vt220 for an alternate mapping. 
#
vt220d|DEC VT220 in vt100 mode with DEC function key labeling, 
        kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 
        kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 
        kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~, 
        kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old, 

vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins, 
        am@, 
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, 

# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
# (not an official DEC entry!)
# The problem with real vt220 terminals is they don't send escapes when in
# in vt220 mode.  This can be gotten around two ways.  1> don't send
# escapes or 2> put the vt220 into vt100 mode and use all the nifty
# features of vt100 advanced video which it then has.
#
# This entry takes the view of putting a vt220 into vt100 mode so
# you can use the escape key in emacs and everything else which needs it.
#
# You probably don't want to use this on a VMS machine since VMS will think
# it has a vt220 and will get fouled up coming out of emacs
#
# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
vt200-js|vt220-js|dec vt200 series with jump scroll, 
        am, 
        cols#80, 
        bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
        cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 
        dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 
        il1=\E[L, ind=\ED, 
        is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m, 
        kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
        kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8, 
        rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l, 
        rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m, 
        rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=, 
        smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m, 
 
# This was DEC's vt320.  Use the purpose-built one below instead 
#vt320|DEC VT320 in vt100 emulation mode,
#       use=vt220,

#
# Use v320n for SCO's LYRIX.  Otherwise, use Adam Thompson's vt320-nam.
#
vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode, 
        am@, 
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, 

# These entries are not DEC's official ones, they were purpose-built for the 
# VT320.  Here are the designer's notes:
# <kel> is end on a PC kbd.  Actually 'select' on a VT.  Mapped to 
# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
# khome is Home on a PC kbd.  Actually 'FIND' on a VT.
# Things that use <knxt> usually use tab anyways... and things that don't use
# tab usually use <knxt> instead...
# kprv is same as tab - Backtab is useless...
# I left out <sgr> because of its RIDICULOUS complexity,
# and the resulting fact that it causes the termcap translation of the entry
# to SMASH the 1k-barrier...
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
# (vt320: uncommented <fsl> --esr) 
vt320|vt300|dec vt320 7 bit terminal, 
        am, eslok, hs, mir, msgr, xenl, 
        cols#80, lines#24, wsl#80, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
        clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
        ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$}, 
        home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 
        il1=\E[L, ind=\ED, 
        is2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, 
        kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
        kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~, 
        kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 
        kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 
        kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 
        kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, 
        kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i, 
        mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m, 
        rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 
        rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 
        rmul=\E[m, 
        rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, 
        sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 
        smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
        tsl=\E[1$}\E[H\E[K, use=vt220+keypad, 
vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy, 
        am@, 
        is2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, 
        rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, 
        use=vt320, 
# We have to init 132-col mode, not 80-col mode.
vt320-w|vt300-w|dec vt320 wide 7 bit terminal, 
        cols#132, wsl#132, 
        is2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, 
        rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H, 
        use=vt320, 
vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am, 
        am@, 
        is2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, 
        rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H, 
        use=vt320-w, 

# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
#   which are pretty much a superset of the VT320.  They have the
#   host writable status line, yet another different DRCS matrix size,
#   and such, but they add the DEC Technical character set, Multiple text
#   pages, selectable length pages, and the like.  The difference between
#   the vt330 and vt340 is that the latter has only 2 planes and a monochrome
#   monitor, the former has 4 planes and a color monitor.  These terminals
#   support VT131 and ANSI block mode, but as with much of these things,
#   termcap/terminfo doesn't deal with these features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode.  This changes the definitions of the
# arrow keys.  Emacs v19 is smarter and mines its keys directly out of 
# your termcap or terminfo entry,
#
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt340: string capability "sb=\E[M" corrected to "sr";
# also, added <rmam>/<smam> based on the init string -- esr)
vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page, 
        am, eslok, hs, mir, msgr, xenl, xon, 
        cols#80, it#8, lines#24, vt#3, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, 
        cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
        cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 
        cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
        cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dch=\E[%p1%dP, 
        dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
        dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, 
        flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, home=\E[H, ht=^I, 
        hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 
        is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 
        kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
        kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 
        kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 
        lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 
        rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O, 
        rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 
        rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, 
        smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 
        smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, 

# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
# (originally written with vt420 as its primary name, and usable for it).
# 
# VT400/420 -- This terminal is a superset of the vt320.  It adds the multiple 
#    text pages and long text pages with selectable length of the vt340, along
#    with left and right margins, rectangular area text copy, fill, and erase
#    operations, selected region character attribute change operations,
#    page memory and rectangle checksums, insert/delete column, reception
#    macros, and other features too numerous to remember right now.  TERMCAP
#    can only take advantage of a few of these added features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode.  This changes the definitions of the
# arrow keys.  Emacs v19 is smarter and mines its keys directly out of 
# your termcap entry,
#
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
# also, added <rmam>/<smam> based on the init string -- esr)
vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap, 
        am, eslok, hs, mir, msgr, xenl, xon, 
        cols#80, it#8, lines#24, vt#3, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
        clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
        dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>, 
        el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, 
        home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 
        il=\E[%p1%dL, il1=\E[L, ind=\ED, 
        is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 
        kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
        kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 
        kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 
        lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 
        rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O, 
        rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 
        rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, sgr0=\E[m, 
        smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 
        smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
        tsl=\E[2$~\E[1$}\E[1;%dH, 

# (vt420: I removed <kf0>, it collided with <kf10>.  I also restored
# a missing <sc> -- esr)
vt420|DEC VT420, 
        am, mir, xenl, xon, 
        cols#80, lines#24, vt#3, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 
        clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
        cub1=^H, cud1=\E[B, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 
        dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 
        if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 
        is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 
        kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 
        kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 
        kslt=\E[4~, rc=\E8, rev=\E[7m$<2>, 
        rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>, 
        rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, 
        rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 
        rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 
        sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 
        smkx=\E=, smso=\E[7m, smul=\E[4m, 

#
# DEC VT220 and up support DECUDK (user-defined keys).  DECUDK (i.e., pfx)
# takes two parameters, the key and the string.  Translating the key is
# straightforward (keys 1-5 are not defined on real terminals, though some
# emulators define these):
#
#               if (key < 16) then  value = key;
#               else if (key < 21) then value = key + 1; 
#               else if (key < 25) then value = key + 2;
#               else if (key < 27) then value = key + 3;
#               else if (key < 30) then value = key + 4;
#               else value = key + 5;
#
# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". 
# There's no provision in terminfo for emitting a string in this format, so the
# application has to know it.
#
vt420pc|DEC VT420 w/PC keyboard, 
        kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, 
        kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, 
        kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~, 
        kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, 
        kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, 
        kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~, 
        kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~, 
        kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~, 
        kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~, 
        kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~, 
        kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~, 
        kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~, 
        kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 
        kf8=\E[19~, kf9=\E[20~, khome=\E[H, 
        pctrm=USR_TERM\:vt420pcdos\:, 
        pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 
        use=vt420, 

vt420pcdos|DEC VT420 w/PC for DOS Merge, 
        lines#25, 
        dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;, 
        pctrm@, 
        rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@, 
        sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc, 

vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys, 
        kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 
        kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 
        kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 
        kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 
        kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
        khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS, 
        use=vt420, 

vt510|DEC VT510, 
        use=vt420, 
vt510pc|DEC VT510 w/PC keyboard, 
        use=vt420pc, 
vt510pcdos|DEC VT510 w/PC for DOS Merge, 
        use=vt420pcdos, 

# VT520/VT525
#
# The VT520 is a monochrome text terminal capable of managing up to
# four independent sessions in the terminal.  It has multiple ANSI
# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
# 925 910+, ADDS A2).  This terminfo data is for the ANSI emulations only.
#
# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
# [Alt]/[Print Screen] depending upon which keyboard and which
# terminal mode is being used.  If Set-Up has been disabled or
# assigned to an unknown key, Set-Up may be entered by pressing
# [F3] as the first key after power up, regardless of keyboard type.
# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
vt520|DEC VT520, 
        am, mir, xenl, xon, 
        cols#80, lines#24, vt#3, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 
        clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
        cub1=^H, cud1=\E[B, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 
        dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 
        if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 
        is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 
        kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 
        kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 
        kslt=\E[4~, 
        pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 
        rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, 
        ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 
        rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 
        rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 
        sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 
        smso=\E[7m, smul=\E[4m, 

# (vt525: I added <rmam>/<smam> based on the init string;
# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
vt525|DEC VT525, 
        am, mir, xenl, xon, 
        cols#80, lines#24, vt#3, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 
        clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 
        cub1=^H, cud1=\E[B, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 
        dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 
        if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED, 
        is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H, 
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR, 
        kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, 
        kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 
        kslt=\E[4~, 
        pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 
        rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, 
        ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 
        rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 
        rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 
        sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 
        smso=\E[7m, smul=\E[4m, 

#### VT100 emulations
#

# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
# to telnetd.   Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
# that this works best with a stock vt100 entry.
dec-vt100|EWAN telnet's vt100 emulation, 
        use=vt100, 

# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
dec-vt220|DOS tnvt200 terminal emulator, 
        am@, use=vt220, 

# Zstem340 is an (IMHO) excellent VT emulator for PC's.  I recommend it to
# anyone who needs PC VT340 emulation. (or anything below that level, for
# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
# RDBM systems, it includes ReGIS and SiXel support!  I'm impressed...
# I can send the address if requested.
# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
z340|zstem vt340 terminal emulator 132col 42line, 
        lines#42, 
        is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, 
        rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, 
        use=vt320-w, 
z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins), 
        am@, 
        is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, 
        rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, 
        use=z340, 

# CRT is shareware.  It implements some xterm features, including mouse.
crt|crt-vt220|CRT 2.3 emulating VT220, 
        bce, msgr, 
        ncv@, 
        hts=\EH, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
        use=vt220, use=ecma+color, 

# PuTTY 0.51 (released 14 December 2000)
# http://www.chiark.greenend.org.uk/~sgtatham/putty/
#
# This emulates vt100 + vt52 (plus a few vt220 features:  ech, SRM, DECTCEM, as
# well as SCO and Atari, color palettes from Linux console).  Reading the code,
# it is intended to be VT102 plus selected features By default, it sets $TERM
# to xterm, which is incorrect, since several features are misimplemented:
#
#       Alt+key always sends ESC+key, so 'km' capability is removed.
#
#       Control responses, wrapping and tabs are buggy, failing a couple of
#       screens in vttest.
#
#       xterm mouse support is not implemented (unrelease version may).
#
# Several features such as backspace/delete are optional; this entry documents
# the default behavior -TD
putty|xterm clone (win32), 
        am, bw, ccc, km, mir, msgr, xenl, 
        colors#8, cols#80, it#8, lines#24, pairs#64, 
        acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
        clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
        ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E)0, home=\E[H, 
        hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, 
        ind=^J, 
        initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p3%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p4%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;, 
        is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 
        kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 
        kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, 
        kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 
        kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 
        kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, 
        kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 
        kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, 
        kpp=\E[5~, kslt=\E[4~, oc=\E]R, op=\E[39;49m, rc=\E8, 
        rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, 
        rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, 
        rmso=\E[27m, rmul=\E[24m, 
        rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7, 
        setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
        sgr0=\E[m, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 
        smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 
        tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
        vpa=\E[%i%p1%dd, 

# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
# T. Teranishi dated Mar 10, 1998.  It is a free software terminal emulator
# (communication program) which supports:
#
#       - Serial port connections.
#       - TCP/IP (telnet) connections.
#       - VT100 emulation, and selected VT200/300 emulation.
#       - TEK4010 emulation.
#       - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
#         Quick-VAN).
#       - Scripts using the "Tera Term Language".
#       - Japanese and Russian character sets.
#
# The program does not come with terminfo or termcap entries.  However, the
# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
# vt52 or doublesize character support; blinking is done with color).  Besides
# the HPA, VPA extensions it also implements CPL and CNL.
#
# All of the function keys can be remapped.  This description shows the default
# mapping, as installed.  Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
# are supported.  F13-F20 are obtained by shifting F3-F10.  The editing keypad
# is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
#       kfnd    Insert
#       kslt    Delete
#       kich1   Home
#       kdch1   PageUp
#       kpp     End
#       knp     PageDown
#
# ANSI colors are implemented, but cannot be combined with video attributes
# except for reverse.
#
# No fonts are supplied with the program, so the acsc string is chosen to
# correspond with the default Microsoft terminal font.
#
# Tera Term recognizes some xterm sequences, including those for setting and
# retrieving the window title, and for setting the window size (i.e., using
# "resize -s"), though it does not pass SIGWINCH to the application if the
# user resizes the window with the mouse.
teraterm|Tera Term Pro, 
        km, xon@, 
        ncv#43, vt@, 
        acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 
        blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, 
        cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
        cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
        dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 
        flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG, 
        il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~, 
        kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 
        kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 
        kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 
        kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 
        kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, 
        kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM, 
        rmso=\E[27m, rmul=\E[24m, sgr0=\E[m, smso=\E[7m, 
        smul=\E[4m, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
        vpa=\E[%i%p1%dd, use=klone+color, use=vt100, 

# Tested with WinNT 4.0, the telnet application assumes the screensize is
# 25x80.  This entry uses the 'Terminal' font, to get line-drawing characters.
#
# Other notes:
# a) Fails tack's cup (cursor-addressing) test, though cup works well enough
#    for casual (occasional) use.  Also fails several of the vttest screens,
#    but that is not unusual for vt100 "emulators".
# b) Does not implement vt100 keypad
# c) Recognizes a subset of vt52 controls.
ms-vt100|MS telnet imitating dec vt100, 
        lines#25, 
        acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 
        ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@, 
        kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, u6=\E[%i%d;%dR, u7=\E[6n, 
        u8=\E[?6c, u9=\E[c, use=vt100, 

# Tested with Windows 2000, the telnet application runs in a console window,
# also using 'Terminal' font.
#
# Other notes:
# a) This version has no function keys or numeric keypad.  Unlike the older
#    version, the numeric keypad is entirely ignored.
# b) The program sets $TERM to "ansi", which of course is inaccurate.
ms-vt100-color|vtnt|windows 2000 ansi (sic), 
        bce, 
        dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color, 
        use=ms-vt100, 

# Based on comments from Federico Bianchi:
#
#       vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
#       scheme for PF keys.
#
# and PuTTY wishlist:
#
#       The modifiers are represented as the codes listed above, prefixed to
#       the normal sequences.  If the modifier is pressed alone, its sequence
#       is transmitted twice in succession.  If multiple modifiers apply,
#       they're transmitted in the order shift, control, alt.
#
#       Shift   \E^S
#       Alt     \E^A,
#       Ctrl    \E^C,
ms-vt100+|vt100+|windows XP vt100+ (sic), 
        kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@, 
        kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3, 
        kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6, 
        kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9, 
        kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@, 
        kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3, 
        kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6, 
        kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9, 
        kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@, 
        kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4, 
        kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6, 
        kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9, 
        kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5, 
        kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+, 
        knp=\E/, kpp=\E?, use=ms-vt100-color, 

ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+, 
        use=ms-vt100+, 

# a minimal subset of a vt100 (compare with "news-unk).
tt|tkterm|Don Libes' tk text widget terminal emulator, 
        clear=\E[H\E[J, cr=^M, cuf1=\E[C, cup=\E[%p1%d;%p2%dH, 
        cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
        kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rmso=\E[m, 
        smso=\E[7m, 

#### X terminal emulators
#
# You can add the following line to your .Xdefaults to change the terminal type
# set by the xterms you start up to my-xterm:
#
# *termName:  my-xterm
#
# System administrators can change the default entry for xterm instances
# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm.  In either
# case, xterm will detect and reject an invalid terminal type, falling back
# to the default of xterm.
#

# X10/6.6       11/7/86, minus alternate screen, plus (csr)
# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
# as these seem not to work -- esr)
x10term|vs100-x10|xterm terminal emulator (X10 window system), 
        OTbs, am, km, mir, msgr, xenl, xon, 
        cols#80, it#8, lines#65, 
        bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 
        cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
        cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
        dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, 
        il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H, 
        kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 
        kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l, 
        rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 
        sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 
        smso=\E[7m, smul=\E[4m, 
# Compatible with the R5 xterm 
# (from the XFree86 3.2 distribution, <blink=@> removed)
# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
# corrected typos in rs2 string - TD
# added u6-u9 -TD
xterm-r5|xterm R5 version, 
        OTbs, am, km, msgr, xenl, 
        cols#80, it#8, lines#24, 
        bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
        el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 
        il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, 
        kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, 
        kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, 
        kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 
        kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 
        kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 
        kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, 
        rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 
        rmul=\E[m, 
        rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, 
        sc=\E7, 
        sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 
        sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 
        smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, 
        u8=\E[?1;2c, u9=\E[c, 
# Compatible with the R6 xterm
# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
# added khome/kend, hts based on the R6 xterm code - TD
# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
# for compatibility with other emulators).
xterm-r6|xterm-old|xterm X11R6 version, 
        OTbs, am, km, mir, msgr, xenl, 
        cols#80, it#8, lines#24, 
        acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
        el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, 
        il1=\E[L, ind=^J, 
        is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^H, 
        kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
        kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 
        kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 
        kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 
        kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 
        kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
        kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 
        kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, 
        rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 
        rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 
        rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7, 
        sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, 
        smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
        u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
# The name has been changed and some aliases have been removed.
xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), 
        OTbs, am, bce, km, mir, msgr, xenl, 
        cols#80, it#8, lines#24, ncv@, 
        acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 
        clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
        ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 
        flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 
        ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 
        il1=\E[L, ind=^J, 
        is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 
        kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 
        kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~, 
        kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 
        kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 
        kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, 
        kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 
        kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~, 
        kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, 
        memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, 
        rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, 
        rmso=\E[27m, rmul=\E[24m, rs1=^O, 
        rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7, 
        setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
        setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
        sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
        sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 
        smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 
        tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
        vpa=\E[%i%p1%dd, use=ecma+color, use=vt220+keypad, 

# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
# codes for F1-F4 except while in VT220 mode.
xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), 
        kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32, 

# This version was released in XFree86 3.3.3 (November 1998).
# Besides providing printer support, it exploits a new feature that allows
# xterm to use terminfo-based descriptions with the titeInhibit resource.
# -- the distribution contained incorrect khome/kend values -TD
xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System), 
        mc5i, 
        blink=\E[5m, ich1@, invis=\E[8m, 
        is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@, 
        mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l, 
        rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, 
        sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 
        smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33, 

# This version was released in XFree86 4.0.
xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), 
        npc, 
        kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~, 
        kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@, 
        ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF, 
        kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, 
        kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, 
        kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 
        kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, 
        kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~, 
        kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, 
        kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P, 
        kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~, 
        kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, 
        kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, 
        kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
        smcup=\E[?1049h, use=xterm-xf86-v333, 

# This version was released in XFree86 4.3.
xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System), 
        npc, 
        kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, 
        kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, 
        kb2=\EOE, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 
        kcuu1=\EOA, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~, 
        kf11=\E[23~, kf12=\E[24~, kf13=\EO2P, kf14=\EO2Q, 
        kf15=\EO2R, kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, 
        kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, 
        kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, 
        kf26=\EO5Q, kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, 
        kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 
        kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 
        kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, 
        kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, 
        kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 
        kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf5=\E[15~, 
        kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\EOH, 
        kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 
        use=xterm-basic, 

# This version is current (XFree86 xterm patch #180).
xterm-xfree86|xterm-new|xterm terminal emulator (XFree86 4.4 Window System), 
        cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS, 
        rin=\E[%p1%dT, use=xterm-xf86-v43, 
#
# This chunk is used for building the VT220/Sun/PC keyboard variants.
xterm-basic|xterm terminal emulator - common (XFree86), 
        am, bce, km, mc5i, mir, msgr, xenl, 
        colors#8, cols#80, it#8, lines#24, pairs#64, 
        acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 
        clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
        ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 
        flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 
        ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 
        ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H, 
        kdch1=\E[3~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El, 
        memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 
        rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, 
        rmso=\E[27m, rmul=\E[24m, rs1=\Ec, 
        rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm, 
        setaf=\E[3%p1%dm, 
        setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
        setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 
        sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?1049h, 
        smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 
        tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
        vpa=\E[%i%p1%dd, 

# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1, 
        rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33, 

# This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
xterm-16color|xterm with 16 colors like aixterm, 
        ncv#32, use=ibm+16color, use=xterm-xfree86, 

# These variants of XFree86 3.9.16 xterm are built as a configure option.
xterm-256color|xterm with 256 colors, 
        ccc, 
        colors#256, ncv#32, pairs#256, 
        initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, 
        setab=\E[48;5;%p1%dm, setaf=\E[38;5;%p1%dm, 
        setb=\E[48;5;%p1%dm, setf=\E[38;5;%p1%dm, 
        use=xterm-xfree86, 
xterm-88color|xterm with 88 colors, 
        colors#88, pairs#88, use=xterm-256color, 

# These two are used to demonstrate the any-event mouse support, i.e., by
# using an extended name "XM" which tells ncurses to put the terminal into
# a special mode when initializing the xterm mouse.
xterm-1002|testing xterm-mouse, 
        XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-xfree86, 
xterm-1003|testing xterm-mouse, 
        XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-xfree86, 

# This is another variant, for XFree86 4.0 xterm (T.Dickey)
# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
# To use it, your decTerminalID resource must be set to 200 or above.
#
#       HTS     \E H    \210
#       RI      \E M    \215
#       SS3     \E O    \217
#       CSI     \E [    \233
#
xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), 
        OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, 
        colors#8, cols#80, it#8, lines#24, pairs#64, 
        acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, 
        civis=\233?25l, clear=\233H\2332J, cnorm=\233?25h, cr=^M, 
        csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, 
        cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, 
        cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, 
        dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 
        ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, 
        enacs=\E(B\E)0, flash=\233?5h$<100/>\233?5l, 
        home=\233H, hpa=\233%i%p1%dG, ht=^I, hts=\210, 
        ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, ind=^J, 
        invis=\2338m, 
        is2=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>, 
        ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H, 
        kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B, 
        kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, 
        kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, 
        kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, 
        kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, 
        kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, 
        kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, 
        kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M, 
        knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i, 
        meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, 
        ri=\215, rmacs=^O, rmam=\233?7l, rmcup=\233?1049l, 
        rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, 
        rs1=\Ec, 
        rs2=\E[62"p\E G\E7\233r\E8\233m\233?7h\233?1;3;4;6l\2334l\E>, 
        sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, 
        setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
        setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
        sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 
        sgr0=\233m^O, smacs=^N, smam=\233?7h, smcup=\233?1049h, 
        smir=\2334h, smkx=\233?1h\E=, smso=\2337m, smul=\2334m, 
        tbc=\2333g, u6=\233[%i%d;%dR, u7=\E[6n, u8=\233[?1;2c, 
        u9=\E[c, vpa=\233%i%p1%dd, 

xterm-hp|XFree86 xterm with hpterm function keys, 
        kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 
        kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, 
        kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ, 
        knp=\ES, kpp=\ET, use=xterm-basic, 

xterm-sco|XFree86 xterm with SCO function keys, 
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, 
        kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y, 
        kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, 
        kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, 
        kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, 
        kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, 
        kf33=\E[s, kf34=\E[t, kf35=\E[u, kf4=\E[P, kf5=\E[Q, 
        kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 
        kich1=\E[L, knp=\E[G, kpp=\E[I, use=xterm-basic, 

# The xterm-xfree86 description has all of the features, but is not completely
# compatible with vt220.  If you are using a Sun or PC keyboard, set the
# sunKeyboard resource to true:
#       + maps the editing keypad
#       + interprets control-function-key as a second array of keys, so a
#         12-fkey keyboard can support vt220's 20-fkeys.
#       + maps numeric keypad "+" to ",".
#       + uses DEC-style control sequences for the application keypad.
#         
xterm-vt220|XFree86 xterm emulating vt220, 
        kbeg=\EOu, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 
        kcuu1=\EOA, kend=\E[4~, kf10=\E[21~, kf11=\E[23~, 
        kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 
        kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 
        kf20=\E[34~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 
        kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 
        kmous=\E[M, knp=\E[6~, kpp=\E[5~, use=xterm-basic, 
        use=vt220+keypad, 

xterm-vt52|XFree86 xterm emulating dec vt52, 
        cols#80, it#8, lines#24, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, 
        cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK, 
        home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 
        kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, 

xterm-noapp|xterm with cursor keys in normal mode, 
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rmcup@, 
        rmkx=\E>, smcup@, smkx=\E=, use=xterm, 

xterm-24|vs100|xterms|xterm terminal emulator (X Window System), 
        lines#24, use=xterm-r6, 

# This is xterm for ncurses.
xterm|xterm terminal emulator (X Window System), 
        use=xterm-r6, 
#       use=xterm-xfree86, 

# These entries allow access to the X titlebar and icon name as a status line. 
# Note that twm (and possibly window managers descended from it such as tvtwm, 
# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
# with it.
xterm+sl|access X title line and icon name, 
        hs, 
        wsl#40, 
        dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm, 
xterm+sl-twm|access X title line (pacify twm-descended window managers), 
        hs, 
        wsl#40, 
        dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm, 

#
# The following xterm variants don't depend on your base version
#
# xterm with bold instead of underline
xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold, 
        smso=\E[7m, smul=\E[1m, use=xterm, 
# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
# (kterm should not invoke DEC Graphics as the alternate character set
#  -- Kenji Rikitake)
# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
#  -- MATSUMOTO Shoji)
kterm|kterm kanji terminal emulator (X window system), 
        eslok, hs, 
        acsc=++\,\,--..00ii``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F, 
        kmous=\E[M, rc=\E8, rmacs=\E(B, sc=\E7, smacs=\E(0, 
        tsl=\E[?E\E[?%i%dT, use=xterm-r6, use=ecma+color, 
kterm-color|kterm-co|kterm with ANSI colors, 
        ncv@, use=kterm, use=ecma+color, 
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
xterm-nic|xterm with ich/ich1 suppressed for non-curses programs, 
        ich@, ich1@, use=xterm, 
# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996 
xterm1|xterm terminal emulator ignoring the alternate screen buffer, 
        rmcup@, smcup@, use=xterm, 

# This describes the capabilities of color_xterm, an xterm variant from
# before ECMA-64 color support was folded into the main-line xterm release.
# This entry is straight from color_xterm's maintainer.
# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
# The README's with the distribution also say that it supports SGR 21, 24, 25
# and 27, but they are not present in the terminfo or termcap.
color_xterm|cx|cx100|color_xterm color terminal emulator for X, 
        OTbs, am, km, mir, msgr, xenl, 
        cols#80, it#8, lines#65, ncv@, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
        el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I, 
        ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 
        is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD, 
        kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~, 
        kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 
        kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 
        kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, 
        kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, 
        rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l, 
        rmso=\E[27m, rmul=\E[24m, 
        rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<, 
        sc=\E7, 
        sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
        sgr0=\E[m, smacs=^N, smam=\E[?7h, 
        smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m, 
        smul=\E[4m, use=ecma+color, use=vt220+keypad, 

# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
# SGR 39 or 49.  SGR 0 does reset colors (along with everything else).  This
# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
# that each of those implements the home, end, delete keys differently.
#
# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
# colors; note that this is not compatible with the 5.2 version.
# csw (2002-05-15): make xterm-color primary instead of nxterm, to 
#   match XFree86's xterm.terminfo usage and prevent circular links
xterm-color|nxterm|generic color xterm, 
        ncv@, 
        op=\E[m, use=xterm-r6, use=klone+color, 

# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
gnome-rh62|Gnome terminal, 
        bce, 
        kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
        use=xterm-color, 

# GNOME Terminal 1.4.0.4 (Redhat 7.2)
#
# This implements a subset of vt102 with a random selection of features from
# other terminals such as color and function-keys.
#
# shift-f1 to shift-f10 are f11 to f20
#
# NumLock changes the application keypad to approximate vt100 keypad, except
# that there is no escape sequence matching comma (,).
#
# Other defects observed:
#       vt100 LNM mode is not implemented.
#       vt100 80/132 column mode is not implemented.
#       vt100 DECALN is not implemented.
#       vt100 DECSCNM mode is not implemented, so flash does not work.
#       vt100 TBC (tab reset) is not implemented.
#       xterm alternate screen controls do not restore cursor position properly
#       it hangs in tack after running function-keys test.
gnome-rh72|GNOME Terminal, 
        bce, 
        civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP, 
        kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;, 
        smam=\E[?7h, tbc@, use=xterm-color, 

# GNOME Terminal 2.0.1 (Redhat 8.0)
#
# Documentation now claims it implements vt220 (which is demonstrably false). 
# However, it does implement ECH, which is a vt220 feature.  And there are
# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
# more of its bugs using vttest.
#
# However, note that bce and msgr are broken in this release.  Tabs (tbc and
# hts) are broken as well.  Sometimes flash (as in xterm-xfree86) works.
#
# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
# operations.  Shift-tab generates a distinct sequence so it can be argued
# that it implements kcbt.
gnome-rh80|GNOME Terminal, 
        bce@, msgr@, 
        ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177, 
        kcbt=\E^I, op=\E[39;49m, use=gnome-rh72, 

# GNOME Terminal 2.2.1 (Redhat 9.0)
#
# bce and msgr are repaired.
gnome-rh90|GNOME Terminal, 
        bce, msgr, use=gnome-rh80, 

gnome|GNOME Terminal, 
        use=gnome-rh90, 

# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
# or not is debatable).
kvt|KDE terminal, 
        bce, km@, 
        kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color, 

# Konsole 1.0.1
# (formerly known as kvt)
#
# This program hardcodes $TERM to 'xterm', which is not accurate.  However, to
# simplify this entry (and point out why konsole isn't xterm), we base this on
# xterm-r6.  The default keyboard appears to be 'linux'.
#
# Notes:
# a) konsole implements several features from XFree86 xterm, though none of
#    that is documented - except of course in its source code - apparently
#    because its implementors are unaccustomed to reading documentation - as
#    evidenced by the sparse and poorly edited documentation distributed with
#    konsole.  Some features such as the 1049 private mode are recognized but
#    incorrectly implemented as a duplicate of the 47 private mode.
# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
#    sends PC-style escapes rather than vt100.
# c) fails vttest menu 3 (Test of character sets) because it does not properly
#    parse some control sequences.  Also fails vttest Primary Device Attributes
#    by sending a bogus code (in the source it says it's supposed to be a
#    vt220, which is doubly incorrect because it does not implement vt220
#    control sequences except for a few special cases).  Treat it as a
#    mildly-broken vt102.
konsole-base|KDE console window, 
        bce, km@, npc, 
        bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, 
        ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, 
        hpa=\E[%i%p1%dG, kbs@, kdch1@, kend@, kf1@, kf10@, kf11@, kf12@, 
        kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, 
        kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, kfnd@, khome@, kslt@, 
        rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
        smam=\E[?7h, vpa=\E[%i%p1%dd, use=ecma+color, 
        use=xterm-r6, 
konsole-linux|KDE console window with linux keyboard, 
        kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, 
        kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, 
        kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 
        kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
        use=konsole-base, 
# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
# than testing the code.
konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm, 
        kend=\E[4~, khome=\E[1~, use=konsole-vt100, 
# The value for kbs reflects local customization rather than the settings used
# for XFree86 xterm.
konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm, 
        kbs=^H, kend=\EOF, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
        khome=\EOH, use=konsole-vt100, 
# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
# it is still useful for deriving the other entries.
konsole-vt100|KDE console window with vt100 (sic) keyboard, 
        kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~, 
        kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, 
        kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~, 
        kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
        khome=\E[H, use=konsole-base, 
konsole-vt420pc|KDE console window with vt420 pc keyboard, 
        kbs=^H, kdch1=\177, use=konsole-vt100, 
konsole-16color|klone of xterm-16color, 
        ncv#32, use=ibm+16color, use=konsole, 
# make a default entry for konsole
konsole|KDE console window, 
        use=konsole-linux, 

# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
# Notes:
# rxvt 2.21b uses
#       smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
# but some applications don't work with that.
# It also has an AIX extension
#       box2=lqkxjmwuvtn,
# and
#       ech=\E[%p1%dX,
# but the latter does not work correctly.
#
# The distributed terminfo says it implements hpa and vpa, but they are not
# implemented correctly, using relative rather than absolute positioning.
#
# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
# Since rxvt is not really compatible with xterm, it should be configured as
# "rxvt" (monochrome) and "rxvt-color". 
rxvt-basic|rxvt terminal base (X Window System), 
        OTbs, am, bce, eo, km, mir, msgr, xenl, xon, 
        cols#80, it#8, lines#24, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
        clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
        el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, 
        home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 
        il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E[?47l\E=\E[?1l, 
        is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, 
        kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kLFT=\E[d, kNXT=\E[6$, 
        kPRV=\E[5$, kRIT=\E[c, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 
        kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 
        kel=\E[8\^, kend=\E[8~, kf1=\E[11~, kf10=\E[21~, 
        kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 
        kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 
        kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, 
        kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 
        kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, 
        kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, 
        rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, 
        rmir=\E[4l, rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 
        rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 
        rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>, 
        s0ds=\E(B, s1ds=\E(0, sc=\E7, sgr0=\E[0m\017, smacs=^N, 
        smcup=\E7\E[?47h, smir=\E[4h, smkx=\E=, smso=\E[7m, 
        smul=\E[4m, tbc=\E[3g, use=vt220+keypad, 
rxvt|rxvt terminal emulator (X Window System), 
        ncv@, 
        cvvis=\E[?25h, hpa=\E[%i%p1%dG, kf0=\E[21~, 
        sgr0=\E[m\017, vpa=\E[%i%p1%dd, use=rxvt-basic, 
        use=ecma+color, 
rxvt-color|rxvt terminal emulator (X Window System), 
        use=rxvt, 
rxvt-xpm|rxvt terminal emulator (X Window System), 
        use=rxvt, 
rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin, 
        acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 
        use=rxvt, 
rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin, 
        acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376, 
        use=rxvt-cygwin, 

# This variant is supposed to work with rxvt 2.7.7 when compiled with
# NO_BRIGHTCOLOR defined.  rxvt needs more work...
rxvt-16color|xterm with 16 colors like aixterm, 
        ncv#32, use=ibm+16color, use=rxvt, 

# From: Michael Jennings <mej@valinux.com>
# removed kf0 which conflicts with kf10 -TD
# remove cvvis which conflicts with cnorm -TD
Eterm|Eterm-color|Eterm with xterm-style color support (X Window System), 
        am, bce, bw, eo, km, mc5i, mir, msgr, xenl, xon, 
        btns#5, cols#80, it#8, lines#24, lm#0, ncv@, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
        clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
        ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 
        flash=\E[?5h\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, 
        hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 
        ind=^J, is1=\E[?47l\E>\E[?1l, 
        is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, 
        kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kLFT=\E[d, kNXT=\E[6$, 
        kPRV=\E[5$, kRIT=\E[c, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, 
        kbeg=\EOu, kbs=^H, kc1=\E[8~, kc3=\E[6~, kcbt=\E[Z, 
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kdch1=\E[3~, kel=\E[8\^, kend=\E[8~, kent=\EOM, kf1=\E[11~, 
        kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 
        kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 
        kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 
        kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 
        kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 
        khome=\E[7~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 
        kslt=\E[4~, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, 
        rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 
        rmkx=, rmso=\E[27m, rmul=\E[24m, 
        rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 
        rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>, 
        sc=\E7, 
        sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
        sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 
        smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
        u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 
        vpa=\E[%i%p1%dd, use=ecma+color, 

# These (xtermc and xtermm) are distributed with Solaris.  They refer to a
# variant of xterm which is apparently no longer supported, but are interesting
# because they illustrate SVr4 curses mouse controls - T.Dickey
xtermm|xterm terminal emulator (monocrome), 
        OTbs, am, km, mir, msgr, xenl, 
        btns#3, cols#80, it#8, lines#24, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
        el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY, 
        home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 
        il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, 
        kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy, 
        kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU, 
        kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_, 
        knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, 
        rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m, 
        rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 
        rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 
        sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
        sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1, 
        smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys, 

xtermc|xterm terminal emulator (color), 
        colors#8, ncv#7, pairs#64, 
        op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 
        setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
        setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 
        use=xtermm, 

# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
# Here's a termcap entry I've been using for xterm_color, which comes
# with BSD/OS 2.0, and the X11R6 contrib tape too I think.  Besides the
# color stuff, I also have a status line defined as the window manager
# title bar. [I have translated it to terminfo -- ESR]
xterm-pcolor|xterm with color used for highlights and status line, 
        bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m, 
        smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6, 

# HP ships this, except for the pb#9600 which was merged in from BSD termcap.
# (hpterm: added empty <acsc>, we have no idea what ACS chars look like --esr)
hpterm|X-hpterm|hp X11 terminal emulator, 
        am, da, db, mir, xhp, 
        cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0, 
        acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, 
        cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, 
        cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, 
        hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H, 
        kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 
        kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, 
        kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 
        khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, 
        knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El, 
        memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 
        pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 
        pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 
        pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, 
        rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, 
        rmul=\E&d@, 
        sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 
        sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, 
        smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 

# This entry describes an xterm with Sun-style function keys enabled
# via the X resource setting "xterm*sunFunctionKeys:true"
# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
# The <kf13>...<kf20> keys are L3-L10.  We don't set <kf16=\E[197z>
# because we want it to be seen as <kcpy>. 
# The <kf31>...<kf45> keys are R1-R15.  We treat some of these in accordance
# with their Sun keyboard labels instead.
# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
xterm-sun|xterm with sunFunctionKeys true, 
        kb2=\E[218z, kcpy=\E[197z, kend=\E[220z, kf1=\E[224z, 
        kf10=\E[233z, kf11=\E[192z, kf12=\E[193z, kf13=\E[194z, 
        kf14=\E[195z, kf15=\E[196z, kf17=\E[198z, kf18=\E[199z, 
        kf19=\E[200z, kf2=\E[225z, kf20=\E[201z, kf3=\E[226z, 
        kf31=\E[208z, kf32=\E[209z, kf33=\E[210z, kf34=\E[211z, 
        kf35=\E[212z, kf36=\E[213z, kf38=\E[215z, kf4=\E[227z, 
        kf40=\E[217z, kf42=\E[219z, kf44=\E[221z, kf5=\E[228z, 
        kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, 
        kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, kich1=\E[2z, 
        knp=\E[222z, kpp=\E[216z, kund=\E[195z, use=xterm, 
xterms-sun|small (80x24) xterm with sunFunctionKeys true, 
        cols#80, lines#24, use=xterm-sun, 

# This is for the extensible terminal emulator on the X11R6 contrib tape.
emu|emu native mode, 
        mir, msgr, xon, 
        colors#15, cols#80, it#8, lines#24, pairs#64, vt#200, 
        acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244, 
        bel=^G, blink=\ES\EW, bold=\ES\EU, civis=\EZ, 
        clear=\EP\EE0;0;, cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, 
        cub=\Eq-%p1%d;, cub1=^H, cud=\Ep%p1%d;, cud1=\EB, 
        cuf=\Eq%p1%d;, cuf1=\ED, cup=\EE%p1%d;%p2%d;, 
        cuu=\Ep-%p1%d;, cuu1=\EA, dch=\EI%p1%d;, dch1=\EI1;, 
        dl=\ER%p1%d;, dl1=\ER1;, ech=\Ej%p1%d;, ed=\EN, el=\EK, 
        el1=\EL, enacs=\0, home=\EE0;0;, ht=^I, hts=\Eh, 
        il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, is2=\ES\Er0;\Es0;, 
        kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, kcuu1=\EA, 
        kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, kf10=\EF10, 
        kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, kf15=\EF15, 
        kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, kf2=\EF02, 
        kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, kf6=\EF06, 
        kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, kich1=\Eins, 
        knp=\Enext, kpp=\Eprior, kslt=\Esel, oc=\Es0;\Er0;, 
        rev=\ES\ET, ri=\EF, rmacs=\0, rmir=\EX, rmso=\ES, rmul=\ES, 
        rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;, 
        setaf=\Er%i%p1%d;, sgr0=\ES, smacs=\0, smir=\EY, 
        smso=\ES\ET, smul=\ES\EV, tbc=\Ej, 

# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
# print interface, ANSI X3.64 colour escape sequences, etc.  Newsgroup postings
# indicate that it emulates more than one terminal, but incompletely.
# 
# This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
# It is based on vt102's entry, with some subtle differences, but also
#       has status line
#       supports ANSI colors (except for 'op' string)
#       apparently implements alternate screen like xterm
#       does not use padding, of course.
mvterm|vv100|SwitchTerm aka mvTERM, 
        am, eslok, hs, km, mir, msgr, xenl, 
        colors#8, cols#80, it#8, lines#24, pairs#64, 
        acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
        dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, 
        fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 
        ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, 
        kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy, 
        kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, 
        op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 
        rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m, 
        rmul=\E[m, 
        rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H, 
        sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 
        sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
        sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, 
        smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 
        tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys, 

### MTERM
#
# This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
#
# "mterm -type ansi" sets $TERM to "ansi"
mterm-ansi|ANSI emulation, 
        am, bw, mir, msgr, 
        it#8, 
        acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 
        cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 
        cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 
        cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 
        dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, 
        el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, 
        il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, 
        invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, 
        ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m, 
        rmul=\E[24m, sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, 
        smul=\E[4m, vpa=\E[%i%p1%dd, 
# mterm normally sets $TERM to "mterm"
mterm|mouse-sun|Der Mouse term, 
        am, bw, mir, 
        it#8, 
        bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S, 
        cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C, 
        home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W, 
        rmir=^O, rmso=^T, smir=^Q, smso=^V, 
# "mterm -type decansi" sets $TERM to "decansi"
decansi|ANSI emulation with DEC compatibility hacks, 
        am, mir, msgr, xenl, 
        colors#8, it#8, pairs#64, 
        acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
        clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 
        cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 
        dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0, 
        home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL, 
        il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, 
        is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB, 
        kcuf1=\EOC, kcuu1=\EOA, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m, 
        ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 
        rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7, 
        setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 
        sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, 
        smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR, 
        u7=\E[6n, vpa=\E[%i%p1%dd, 

#### MGR
#
# MGR is a Bell Labs window system lighter-weight than X.
# These entries describe MGR's xterm-equivalent. 
# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997 
#

mgr|Bellcore MGR (non X) window system terminal emulation, 
        am, km, 
        bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M, 
        csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er, 
        cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h, 
        dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>, 
        dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u, 
        ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>, 
        il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 
        kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S, 
        rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n, 
        smul=\E4n, 
mgr-sun|Mgr window with Sun keyboard, 
        ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z, 
        kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z, 
        kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, 
        kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, 
        kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, 
        kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z, 
        kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr, 
mgr-linux|Mgr window with Linux keyboard, 
        ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~, 
        kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~, 
        kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, 
        kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
        khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr, 

######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
#

# Columbus UNIX virtual terminal. This terminal also appears in 
# UNIX 4.0 and successors as line discipline 1 (?), but is 
# undocumented and does not really work quite right.
cbunix|cb unix virtual terminal, 
        OTbs, am, da, db, 
        cols#80, lines#24, lm#0, 
        bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 
        cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL, 
        el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB, 
        kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A, 
        smso=\Ea^D, smul=\Ea^A, 
# (vremote: removed obsolete ":nl@:" -- esr)
vremote|virtual remote terminal, 
        am@, 
        cols#79, use=cbunix, 

pty|4bsd pseudo teletype, 
        cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!, 
        smso=\Ea$, smul=\Ea!, use=cbunix, 

# The codes supported by the term.el terminal emulation in GNU Emacs 19.30 
eterm|gnu emacs term.el terminal emulation, 
        am, mir, xenl, 
        cols#80, lines#24, 
        bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
        el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 
        il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m, 
        rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 
        sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m, 
        smul=\E[4m, 

# Entries for use by the `screen' program by Juergen Weigert, 
# Michael Schroeder, Oliver Laumann.  The screen and
# screen-w entries came with version 3.7.1.  The screen2 and screen3 entries
# come from University of Wisconsin and may be older.
# (screen: added <cnorm> on ANSI model -- esr)
#
# 'screen' defines extensions to termcap.  Some are used in its terminal
# description:
#      G0   (bool)  Terminal can deal with ISO 2022  font  selection sequences.
#      AX   (bool)  Does  understand ANSI set default fg/bg color
#                   (\E[39m / \E[49m).
#      S0   (str)   Switch charset 'G0' to the specified charset.
#      E0   (str)   Switch charset 'G0' back to standard charset.
#
# tested with screen 3.09.08
screen|VT 100/ANSI X3.64 virtual terminal, 
        OTbs, OTpt, am, km, mir, msgr, xenl, G0, 
        colors#8, cols#80, it#8, lines#24, pairs#64, 
        acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 
        clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 
        cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 
        dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 
        flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 
        il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z, 
        kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 
        kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, 
        kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 
        kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 
        khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 
        nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 
        rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, 
        rmul=\E[24m, rs2=\Ec, sc=\E7, sgr0=\E[m, smacs=^N, 
        smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[3m, 
        smul=\E[4m, tbc=\E[3g, E0=\E(B, S0=\E(%p1%c, 
        use=ecma+color, 
# The bce and status-line entries are from screen 3.9.13 (and require some
# changes to .screenrc).
screen-bce|VT 100/ANSI X3.64 virtual terminal with bce, 
        bce, use=screen, 
screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line, 
        dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen, 

# Read the fine manpage:
#       When  screen  tries  to  figure  out  a  terminal name for
#       itself, it first looks for an entry named "screen.<term>",
#       where  <term>  is the contents of your $TERM variable.  If
#       no such entry exists, screen tries "screen" (or "screen-w"
#       if the terminal is wide (132 cols or more)).  If even this
#       entry cannot be found, "vt100" is used as a substitute.
#
# Here are a few customized entries which are useful -TD
#
# Notes:
# (a)   screen does not support invis.
# (b)   screen's implementation of bw is incorrect according to tack.
# (c)   screen appears to hardcode the strings for khome/kend, making it
#       necessary to override the "use=" clause's values.
# (d)   screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
#       which is NOT the same as the terminfo screen.<term>.
# (e)   when screen finds one of these customized entries, it sets $TERM to
#       match.  Hence, no "screen.xterm" entry is provided, since that would
#       create heartburn for people running remote xterm's.
#
#       xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
#       since the default translations override the built-in keycode
#       translation.  They are suppressed here to show what is tested by tack.
screen.xterm-xfree86|screen customized for XFree86 xterm, 
        bce@, bw, 
        invis@, kIC@, kNXT@, kPRV@, kend=\E[4~, khome=\E[1~, meml@, 
        memu@, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 
        use=xterm-xfree86, 
# xterm-r6 does not really support khome/kend unless it is propped up by
# the translations resource.
screen.xterm-r6|screen customized for X11R6 xterm, 
        bw, use=xterm-r6, 
# Color applications running in screen and TeraTerm do not play well together
# on Solaris because Sun's curses implementation gets confused.
screen.teraterm|disable ncv in teraterm, 
        ncv#127, 
        acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 
        use=screen, 
# fix the backspace key
screen.linux|screen in linux console, 
        bw, 
        kbs=\177, kcbt@, use=screen, 

screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols, 
        cols#132, use=screen, 

screen2|old VT 100/ANSI X3.64 virtual terminal, 
        cols#80, it#8, lines#24, 
        cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
        el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL, 
        il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 
        kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, 
        kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, 
        nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m, 
        rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h, 
        smso=\E[3m, smul=\E[4m, tbc=\E[3g, 
# (screen3: removed unknown ":xv:LP:G0:" -- esr)
screen3|older VT 100/ANSI X3.64 virtual terminal, 
        km, mir, msgr, 
        cols#80, it#8, lines#24, 
        bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 
        cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 
        el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 
        il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD, 
        kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, 
        kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 
        rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, 
        sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m, 
        smul=\E[4m, tbc=\E[3g, 

# Francesco Potorti <F.Potorti@cnuce.cnr.it>:
# NCSA telnet is one of the most used telnet clients for the Macintosh.  It has
# been maintained until recently by the National Center for Supercomputer
# Applications, and it is feature rich, stable and free.  It can be downloaded
# from www.ncsa.edu.  This terminfo description file is based on xterm-vt220,
# xterm+sl, and the docs at NCSA.  It works well.
#
# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
# The terminal options should be set as follows:
#         Xterm sequences ON
#         use VT wrap mode ON
#         use Emacs arrow keys OFF
#         CTRL-COMND is Emacs meta ON
#         8 bit mode ON
#         answerback string: "ncsa-vt220-8"
#         setup keys: all disabled
#
# Application mode is not used.
#
# Other special mappings:
#       Apple           VT220
#       HELP            Find
#       HOME            Insert here
#       PAGEUP          Remove
#       DEL             Select
#       END             Prev Screen
#       PAGEDOWN        Next Screen
#
# Though it supports ANSI color, NCSA Telnet uses color to represent blinking
# text.
#
# The status-line manipulation is a mapping of the xterm-compatible control
# sequences for setting the window-title.  So you must use tsl and fsl in
# pairs, since the latter ends the string that is loaded to the window-title.
ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, 
        am, hs, km, mir, msgr, xenl, 
        acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 
        bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 
        clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 
        csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 
        cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 
        dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 
        dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 
        flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH, 
        ich=\E[%p1%d@, if=/usr/share/tabset/vt100, 
        il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>, 
        is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H, 
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~, 
        kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~, 
        kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, 
        kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~, 
        khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i, 
        rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, 
        rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l, 
        rmso=\E[27m, rmul=\E[24m, 
        rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 
        sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7, 
        smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;, 
        u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?62;1;6c, u9=\E[c, 
ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, 
        use=ncsa-m, use=klone+color, 
ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, 
        hs@, 
        dsl@, fsl@, tsl@, use=ncsa, 
ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, 
        hs@, 
        dsl@, fsl@, tsl@, use=ncsa-m, 
# alternate -TD:
# The documented function-key mapping refers to the Apple Extended Keyboard
# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6).  We use the VT220-style
# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
# some keyboards and many applications require these as F1-F4.
#
ncsa-vt220|NCSA Telnet using vt220-compatible function keys, 
        kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 
        kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 
        kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, 
        kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 
        kf8=\E[19~, kf9=\E[20~, use=ncsa, 

#### Pilot Pro Palm-Top
#
# Termcap for Top Gun Telnet and SSH on the Palm Pilot.
# http://www.ai/~iang/TGssh/
pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional, 
        OTbs, am, xenl, 
        cols#39, lines#16, 
        bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J, 
        cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I, 
        ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s, 
        rmso=\EB, smso=\Eb, 

# From: Federico Bianchi <bianchi@www.arte.unipi.it>
# These entries are for the Embeddable Linux Kernel System (ELKS)
# project - an heavily stripped down Linux to be run on 16 bit
# boxes or, eventually, to be used in embedded systems - and have been
# adapted from the stock ELKS termcap. The project itself looks stalled,
# and the latest improvements I know of date back to March 2000.
#
# To cope with the ELKS dumb console I added an "elks-glasstty" entry;
# as an added bonus, this deals with all the capabilities common to
# both VT52 and ANSI (or, eventually, "special") modes.

elks-glasstty|ELKS glass-TTY capabilities, 
        OTbs, am, 
        cols#80, it#8, lines#25, 
        bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 
        nel=^M^J, 

elks-vt52|ELKS vt52 console, 
        clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 
        cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK, 
        home=\EH, use=elks-glasstty, 

elks-ansi|ELKS ANSI console, 
        clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 
        rmso=\E[m, smso=\E[7m, use=elks-glasstty, 

# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
# instead of VT52, but the "elks" entry still refers to the latter.

elks|default ELKS console, 
        use=elks-vt52, 

# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
# one but in screen size

sibo|ELKS SIBO console, 
        cols#61, it#8, lines#20, use=elks-vt52, 

######## COMMERCIAL WORKSTATION CONSOLES
#

#### Alpha consoles
#

# This is from the OSF/1 Release 1.0 termcap file
pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation, 
        am, xon, 
        cols#80, lines#25, 
        bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 
        el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H, 
        kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 
        nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m, 

#### Sun consoles
#

# :is1: resets scrolling region in case a previous user had used "tset vt100"
oldsun|Sun Microsystems Workstation console, 
        OTbs, am, km, mir, msgr, 
        cols#80, it#8, lines#34, 
        bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 
        dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 
        ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 
        is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 
        kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, 
        rmso=\E[m, sgr0=\E[m, smso=\E[7m, 
# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
sun-il|Sun Microsystems console with working insert-line, 
        am, km, msgr, 
        cols#80, lines#34, 
        bel=^G, bold@, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 
        cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 
        dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 
        ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 
        kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 
        kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z, 
        kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z, 
        kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, 
        kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z, 
        knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z, 
        kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s, 
        sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 
        sgr0=\E[m, smso=\E[7m, smul@, u8=\E[1t, u9=\E[11t, 
# On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
# flake out on the last line.  Unfortunately, without them the terminal has no
# way to scroll.
sun-cgsix|sun-ss5|Sun SparcStation 5 console, 
        il@, il1@, use=sun-il, 
# If you are using an SS5, change the sun definition to use sun-ss5.
sun|sun1|sun2|Sun Microsystems Inc. workstation console, 
        use=sun-il, 

# From: <john@ucbrenoir>  Tue Sep 24 13:14:44 1985
sun-s|Sun Microsystems Workstation window with status line, 
        hs, 
        dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun, 
sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, 
        hs, 
        dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e, 
sun-48|Sun 48-line window, 
        cols#80, lines#48, use=sun, 
sun-34|Sun 34-line window, 
        cols#80, lines#34, use=sun, 
sun-24|Sun 24-line window, 
        cols#80, lines#24, use=sun, 
sun-17|Sun 17-line window, 
        cols#80, lines#17, use=sun, 
sun-12|Sun 12-line window, 
        cols#80, lines#12, use=sun, 
sun-1|Sun 1-line window for sysline, 
        eslok, hs, 
        cols#80, lines#1, 
        dsl=^L, fsl=\E[K, tsl=^M, use=sun, 
sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character, 
        ich1@, rmir@, smir@, use=sun, 
sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history, 
        lines#35, 
        rmcup=\E[>4h, smcup=\E[>4l, use=sun, 
sun-type4|Sun Workstation console with type 4 keyboard, 
        kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z, 
        kcuu1=\E[215z, use=sun-il, 

#### Iris consoles
#

# (wsiris: this had extension capabilities
#       :HS=\E7F2:HE=\E7F7:\
#       :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
# See the note on Iris extensions near the end of this file.  
# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> & 
# <flash> from BRL -- esr)
wsiris|iris40|iris emulating a 40 line visual 50 (approximately), 
        OTbs, OTnc, OTpt, am, 
        OTkn#3, cols#80, it#8, lines#40, 
        OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB, 
        cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 
        cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK, 
        flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL, 
        ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB, 
        kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, 
        kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI, 
        rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P, 
        smul=\E7R2\E9P, 

#### NeWS consoles
#
# Console terminal windows under the NeWS (Sun's Display Postscript windowing
# environment).   Note: these have nothing to do with Sony's News workstation
# line.
#

# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
psterm|psterm-basic|NeWS psterm-80x34, 
        OTbs, am, hs, km, ul, 
        cols#80, it#8, lines#34, 
<