1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2015/05/02 22:39:46 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
40 # Eric S. Raymond (current maintainer)
41 # John Kunze, Berkeley
42 # Craig Leres, Berkeley
44 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
45 # address is no longer valid. The latest version can always be found at
46 # <http://www.tuxedo.org/terminfo>.
48 # PURPOSE OF THIS FILE:
50 # This file describes the capabilities of various character-cell terminals,
51 # as needed by software such as screen-oriented editors.
53 # Other terminfo and termcap files exist, supported by various OS vendors
54 # or as relics of various older versions of UNIX. This one is the longest
55 # and most comprehensive one in existence. It subsumes not only the entirety
56 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
57 # termcap file, but also large numbers of vendor-maintained termcap and
58 # terminfo entries more complete and carefully tested than those in historical
59 # termcap/terminfo versions.
61 # Pointers to related resources (including the ncurses distribution) may
62 # be found at <http://www.tuxedo.org/terminfo>.
64 # INTERNATIONALIZATION:
66 # This file uses only the US-ASCII character set (no ISO8859 characters).
68 # This file assumes a US-ASCII character set. If you need to fix this, start
69 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
70 # for your character set. \E(A and \E)A enables the British character set
71 # with the pound sign at position 2/3.
73 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
74 # C1 characters are considered the first-byte set of the Japanese encodings,
75 # so \E)0 should be avoided in <enacs> and initialization strings.
79 # The version you are looking at may be in any of three formats: master
80 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
81 # which by the format given in the header above.
83 # The master format is accepted and generated by the terminfo tools in the
84 # ncurses suite; it differs from stock (System V-compatible) terminfo only
85 # in that it admits a group of capabilities (prefixed `OT') equivalent to
86 # various obsolete termcap capabilities. You can, thus, convert from master
87 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
88 # you have ncurses `tic -I' is nicer (among other things, it automatically
89 # outputs entries in a canonical form).
91 # The termcap version is generated automatically from the master version
92 # using tic -C. This filtering leaves in the OT capabilities under their
93 # original termcap names. All translated entries fit within the 1023-byte
94 # string-table limit of archaic termcap libraries except where explicitly
95 # noted below. Note that the termcap translation assumes that your termcap
96 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
97 # capability. Older versions of GNU termcap, through 1.3, do not.
99 # For details on these formats, see terminfo(5) in the ncurses distribution,
100 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
101 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
102 # as of June 1995; they are encouraging everyone to migrate to ncurses.
104 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
105 # no entry in this file has embedded comments. This is so source translation
106 # to termcap only has to carry over leading comments. Also, no name field
107 # contains embedded whitespace (such whitespace confuses rdist).
109 # Further note: older versions of this file were often installed with an editor
110 # script (reorder) that moved the most common terminal types to the front of
111 # the file. This should no longer be necessary, as the file is now ordered
112 # roughly by type frequency with ANSI/VT100 and other common types up front.
114 # Some information has been merged in from terminfo files distributed by
115 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
116 # comes from vendors who maintain official terminfos for their hardware
117 # (notably DEC and Wyse).
119 # A detailed change history is included at the end of this file.
123 # Comments in this file begin with # - they cannot appear in the middle
124 # of a terminfo/termcap entry (this feature had to be sacrificed in order
125 # to allow standard terminfo and termcap syntax to be generated cleanly from
126 # the master format). Individual capabilities are commented out by
127 # placing a period between the colon and the capability name.
129 # The file is divided up into major sections (headed by lines beginning with
130 # the string "########") and minor sections (beginning with "####"); do
132 # grep "^####" <file> | more
134 # to see a listing of section headings. The intent of the divisions is
135 # (a) to make it easier to find things, and (b) to order the database so
136 # that important and frequently-encountered terminal types are near the
137 # front (so that you'll get reasonable search efficiency from a linear
138 # search of the termcap form even if you don't use reorder). Minor sections
139 # usually correspond to manufacturers or standard terminal classes.
140 # Parenthesized words following manufacturer names are type prefixes or
141 # product line names used by that manufacturers.
143 # HOW TO READ THE ENTRIES:
145 # The first name in an entry is the canonical name for the model or
146 # type, last entry is a verbose description. Others are mnemonic synonyms for
149 # Terminal names look like <manufacturer> <model> - <modes/options>
150 # The part to the left of the dash, if a dash is present, describes the
151 # particular hardware of the terminal. The part to the right may be used
152 # for flags indicating special ROMs, extra memory, particular terminal modes,
153 # or user preferences.
155 # All names should be in lower case, for consistency in typing.
157 # The following are conventionally used suffixes:
158 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
159 # -am Enable auto-margin.
160 # -m Monochrome. Suppress color support
161 # -mc Magic-cookie. Some terminals (notably older Wyses) can
162 # only support one attribute without magic-cookie lossage.
163 # Their base entry is usually paired with another that
164 # uses magic cookies to support multiple attributes.
165 # -nam No auto-margin - suppress <am> capability
166 # -nl No labels - suppress soft labels
167 # -ns No status line - suppress status line
168 # -rv Terminal in reverse video mode (black on white)
169 # -s Enable status line.
170 # -vb Use visible bell (<flash>) rather than <bel>.
171 # -w Wide - in 132 column mode.
172 # If a name has multiple suffixes and one is a line height, that one should
173 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
175 # Entries with embedded plus signs are designed to be included through use/tc
176 # capabilities, not used as standalone entries.
178 # To avoid search clashes, some older all-numeric names for terminals have
179 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
180 # All primary names of terminals now have alphanumeric prefixes.
182 # Comments marked "esr" are mostly results of applying the termcap-compiler
183 # code packaged with ncurses and contemplating the resulting error messages.
184 # In many cases, these indicated obvious fixes to syntax garbled by the
185 # composers. In a few cases, I was able to deduce corrected forms for garbled
186 # capabilities by looking at context. All the information in the original
187 # entries is preserved in the comments.
189 # In the comments, terminfo capability names are bracketed with <> (angle
190 # brackets). Termcap capability names are bracketed with :: (colons).
192 # INTERPRETATION OF USER CAPABILITIES
194 # The System V Release 4 and XPG4 terminfo format defines ten string
195 # capabilities for use by applications, <u0>...<u9>. In this file, we use
196 # certain of these capabilities to describe functions which are not covered
197 # by terminfo. The mapping is as follows:
199 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
200 # u8 terminal answerback description
201 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
202 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
204 # The terminal enquire string <u9> should elicit an answerback response
205 # from the terminal. Common values for <u9> will be ^E (on older ASCII
206 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
208 # The cursor position request (<u7>) string should elicit a cursor position
209 # report. A typical value (for VT100 terminals) is \E[6n.
211 # The terminal answerback description (u8) must consist of an expected
212 # answerback string. The string may contain the following scanf(3)-like
215 # %c Accept any character
216 # %[...] Accept any number of characters in the given set
218 # The cursor position report (<u6>) string must contain two scanf(3)-style
219 # %d format elements. The first of these must correspond to the Y coordinate
220 # and the second to the %d. If the string contains the sequence %i, it is
221 # taken as an instruction to decrement each value after reading it (this is
222 # the inverse sense from the cup string). The typical CPR value is
223 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
225 # These capabilities are used by tack(1m), the terminfo action checker
226 # (distributed with ncurses 5.0).
230 # All the entries in this file have been edited to assume that the tabset
231 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
232 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
233 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
235 # No curses package we know of actually uses these files. If their location
236 # is an issue, you will have to hand-patch the file locations before compiling
239 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
241 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
242 # character-cell terminals are increasingly replaced by X displays, much of
243 # this file is becoming a historical document (this is part of the reason for
244 # the new organization, which puts ANSI types, xterm, Unix consoles,
245 # and vt100 up front in confidence that this will catch 95% of new hardware).
247 # For the terminal types still alive, I'd like to have manufacturer's
248 # contact data (Internet address and/or snail-mail + phone).
250 # I'm also interested in enriching the comments so that the latter portions of
251 # the file do in fact become a potted history of VDT technology as seen by
252 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
253 # include its live/dead/out-of-the-business status, and for as many
254 # terminal types as possible to be tagged with information like years
255 # of heaviest use, popularity, and interesting features.
257 # I'm especially interested in identifying the obscure entries listed under
258 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
259 # wisdom about them gets lost. If you know a lot about obscure old terminals,
260 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
261 # eyeball it for things you can identify and describe.
263 # If you have been around long enough to contribute, please read the file
264 # with this in mind and send me your annotations.
266 # COPYRIGHTS AND OTHER DELUSIONS
268 # The BSD ancestor of this file had a standard Regents of the University of
269 # California copyright with dates from 1980 to 1993.
271 # Some information has been merged in from a terminfo file SCO distributes.
272 # It has an obnoxious boilerplate copyright which I'm ignoring because they
273 # took so much of the content from the ancestral BSD versions of this file
274 # and didn't attribute it, thereby violating the BSD Regents' copyright.
276 # Not that anyone should care. However many valid functions copyrights may
277 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
278 # contributors makes about as much sense as copyrighting a wall-full of
279 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
281 # This file deliberately has no copyright. It belongs to no one and everyone.
282 # If you claim you own it, you will merely succeed in looking like a fool.
283 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
284 # There are no guarantees anywhere. Svaha!
287 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
289 # This section describes terminal classes and brands that are still
295 # Special "terminals". These are used to label tty lines when you don't
296 # know what kind of terminal is on it. The characteristics of an unknown
297 # terminal are the lowest common denominator - they look about like a ti 700.
300 dumb|80-column dumb tty,
303 bel=^G, cr=^M, cud1=^J, ind=^J,
304 unknown|unknown terminal type,
306 lpr|printer|line printer,
309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
310 glasstty|classic glass tty interpreting ASCII control characters,
313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
314 kcud1=^J, nel=^M^J, .kbs=^H,
318 bel=^G, cr=^M, cud1=^J, ind=^J,
320 # This is almost the same as "dumb", but with no prespecified width.
321 # DEL and ^C are hardcoded to act as kill characters.
322 # ^D acts as a line break (just like newline).
325 # for compatibility with xterm -TD
326 9term|Plan9 terminal emulator for X,
328 OTnl=^J, bel=^G, cud1=^J,
330 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
332 # See the end-of-file comment for more on these.
335 # ANSI capabilities are broken up into pieces, so that a terminal
336 # implementing some ANSI subset can use many of them.
338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
341 cuu=\E[%p1%dA, use=ansi+local1,
343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
347 clear=\E[H\E[J, ed=\E[J, el=\E[K,
349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
351 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
353 rep=%p1%c\E[%p2%{1}%-%db,
357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
363 ansi+sgr|ansi graphic renditions,
364 blink=\E[5m, invis=\E[8m, rev=\E[7m,
365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
367 ansi+sgrso|ansi standout only,
368 rmso=\E[m, smso=\E[7m,
369 ansi+sgrul|ansi underline only,
370 rmul=\E[m, smul=\E[4m,
371 ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
375 ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
379 ansi+csr|ansi scroll-region plus cursor save & restore,
380 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
382 # The normal (ANSI) flavor of "media copy" building block asserts that
383 # characters sent to the printer do not echo on the screen. DEC terminals
384 # can also be put into autoprinter mode, where each line is sent to the
385 # printer as you move off that line, e.g., by a carriage return.
386 ansi+pp|ansi printer port,
388 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
389 dec+pp|DEC autoprinter mode,
390 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
392 # The IBM PC alternate character set. Plug this into any Intel console entry.
393 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
394 # ROM graphics for control characters such as the diamond, up- and down-arrow.
395 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
396 # will work with any Intel console, they all seem to have inherited \E[11m
397 # from the ANSI.SYS de-facto standard.
398 klone+acs|alternate character set for ansi.sys displays,
399 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
400 rmacs=\E[10m, smacs=\E[11m,
402 # Highlight controls corresponding to the ANSI.SYS standard. Most
403 # console drivers for Intel boxes obey these. Makes the same assumption
404 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
405 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
406 klone+sgr|attribute control for ansi.sys displays,
407 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
408 rmso=\E[m, rmul=\E[m,
409 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
410 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
413 # Most Intel boxes do not treat "invis" (invisible) text.
414 klone+sgr8|attribute control for ansi.sys displays,
416 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
419 # Highlight controls corresponding to the ANSI.SYS standard. *All*
420 # console drivers for Intel boxes obey these. Does not assume \E[11m will
421 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
422 # diamond and arrow characters under curses.
423 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
424 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
426 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
427 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
430 # KOI8-R (RFC1489) acs (alternate character set)
431 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
432 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
433 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
434 rmacs=\E[10m, smacs=\E[11m,
436 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
437 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
438 # but equivalent strings that don't rely on that coincidence:
439 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
440 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
441 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
442 # They match a subset of ECMA-48.
443 klone+color|color control for ansi.sys and ISO6429-compatible displays,
444 colors#8, ncv#3, pairs#64,
445 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
447 # This is better than klone+color, it doesn't assume white-on-black as the
448 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
449 ecma+color|color control for ECMA-48-compatible terminals,
451 colors#8, ncv#3, pairs#64,
452 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
454 # Attribute control for ECMA-48-compatible terminals
455 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
456 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
458 # For comparison, here are all the capabilities implied by the Intel
459 # Binary Compatibility Standard (level 2) that fit within terminfo.
460 # For more detail on this rather pathetic standard, see the comments
461 # near the end of this file.
462 ibcs2|Intel Binary Compatibility Standard prescriptions,
463 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
464 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
465 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
466 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
467 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
468 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
469 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
472 #### ANSI/ECMA-48 terminals and terminal emulators
474 # See near the end of this file for details on ANSI conformance.
475 # Don't mess with these entries! Lots of other entries depend on them!
477 # This section lists entries in a least-capable to most-capable order.
478 # if you're in doubt about what `ANSI' matches yours, try them in that
479 # order and back off from the first that breaks.
481 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
482 # and more than one page of memory. It uses local motions instead of
483 # direct cursor addressing, and makes almost no assumptions. It does
484 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
485 ansi-mr|mem rel cup ansi,
487 cols#80, lines#24, use=vanilla, use=ansi+erase,
490 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
491 # beware of screen size problems and memory relative cursor addressing.
492 ansi-mini|any ansi terminal with pessimistic assumptions,
494 cols#80, lines#24, use=vanilla, use=ansi+cup,
497 # ansi-mtabs adds relative addressing and minimal tab support
498 ansi-mtabs|any ansi terminal with pessimistic assumptions,
500 ht=^I, use=ansi-mini, use=ansi+local1,
502 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
504 # The following is an entry for the full ANSI 3.64 (1977). It lacks
505 # padding, but most terminals using the standard are "fast" enough
506 # not to require any -- even at 9600 bps. If you encounter problems,
507 # try including the padding specifications.
509 # Note: the :as: and :ae: specifications are not implemented here, for
510 # the available termcap documentation does not make clear WHICH alternate
511 # character set to specify. ANSI 3.64 seems to make allowances for several.
512 # Please make the appropriate adjustments to fit your needs -- that is
513 # if you will be using alternate character sets.
515 # There are very few terminals running the full ANSI 3.64 standard,
516 # so I could only test this entry on one verified terminal (Visual 102).
517 # I would appreciate the results on other terminals sent to me.
519 # Please report comments, changes, and problems to:
521 # U.S. MAIL: Hugh Hansard
524 # Atlanta, GA. 30322.
526 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
528 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
529 ansi77|ansi 3.64 standard 1977 version,
531 cols#80, it#8, lines#24,
532 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
533 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
534 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
535 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
536 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
537 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
538 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
539 smso=\E[7m, smul=\E[4m,
541 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
542 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
543 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
544 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
545 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
546 # to confuse many emulators. On the other hand, we can count on these programs
547 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
548 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
549 # ANSI.SYS influence.
550 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
551 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
553 cols#80, it#8, lines#24,
554 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
555 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
556 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
557 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
558 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
560 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
561 lines#25, use=pcansi-m,
562 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
563 lines#33, use=pcansi-m,
564 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
565 lines#43, use=pcansi-m,
566 # The color versions. All PC emulators do color...
567 pcansi|ibm-pc terminal programs claiming to be ansi,
568 use=klone+color, use=pcansi-m,
569 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
570 lines#25, use=pcansi,
571 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
572 lines#33, use=pcansi,
573 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
574 lines#43, use=pcansi,
576 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
577 # If you want pound signs rather than dollars, replace `B' with `A'
578 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
579 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
580 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
582 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
583 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
584 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
585 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
586 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
587 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
588 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
589 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
590 vpa=\E[%i%p1%dd, use=pcansi-m,
592 ansi+enq|ncurses extension for ANSI ENQ,
593 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
596 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
597 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
598 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
599 ansi|ansi/pc-term compatible with color,
600 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
602 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
603 # all the normal ANSI stuff with no extensions. It assumes
604 # insert/delete line/char is there, so it won't work with
605 # vt100 clones. It assumes video attributes for bold, blink,
606 # underline, and reverse, which won't matter much if the terminal
607 # can't do some of those. Padding is assumed to be zero, which
608 # shouldn't hurt since xon/xoff is assumed.
609 ansi-generic|generic ansi standard terminal,
611 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
612 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
613 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
614 use=ansi+sgrbold, use=ansi+arrows,
616 #### DOS ANSI.SYS variants
618 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
619 # documentation (except for the keyboard key reassignment feature, which
620 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
621 # though undocumented. The <pfkey> capability is untested but should work for
622 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
623 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
624 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
625 OTbs, am, mir, msgr, xon,
627 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
628 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
629 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
630 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
631 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
632 u7=\E[6n, use=klone+color, use=klone+sgr8,
634 # Keypad: Home=\0G Up=\0H PrPag=\0I
635 # ka1,kh kcuu1 kpp,ka3
637 # Left=\0K 5=\0L Right=\0M
640 # End=\0O Down=\0P NxPag=\0Q
641 # kc1,kend kcud1 kc3,knp
646 # On keyboard with 12 function keys,
647 # shifted f-keys: F13-F24
648 # control f-keys: F25-F36
649 # alt f-keys: F37-F48
650 # The shift/control/alt keys do not modify each other, but alt overrides both,
651 # and control overrides shift.
653 # <pfkey> capability for F1-F48 -TD
654 ansi.sys|ANSI.SYS 3.1 and later versions,
655 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
656 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
657 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
658 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
659 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
660 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
661 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
662 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
663 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
664 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
665 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
666 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
667 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<%t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t%'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
671 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
672 # This should only be used when the terminal emulator cannot redefine the keys.
673 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
674 # definitions must be restored. If the terminal emulator is quit while in vi
675 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
676 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
677 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
678 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
679 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
680 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
681 # Consequently the End keypad key could not be set (it is relatively safe and
682 # actually useful because it sends ^@ O, which beeps and opens a line above).
683 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
684 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
685 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
686 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
689 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
690 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
691 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
692 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
695 # See ansi.sysk and nansi.sys above.
696 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
697 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
698 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
701 #### Atari ST terminals
703 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
705 tw52|tw52-color|Toswin window manager with color,
707 colors#16, pairs#256,
708 oc=\Eb?\Ec0, op=\Eb?\Ec0,
709 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
710 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
711 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
712 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
714 tw52-m|Toswin window manager monochrome,
717 bold=\Eya, dch1=\Ea, dim=\EyB,
718 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
719 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
720 smso=\EyQ, smul=\EyH, use=at-m,
721 tt52|Atari TT medium and high resolution,
722 lines#30, use=at-color,
723 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
725 colors#16, pairs#256,
726 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
727 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
728 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
729 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
730 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
732 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
734 cols#80, it#8, lines#24,
735 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
736 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
737 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
738 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
739 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
740 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
741 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
742 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
743 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
744 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
745 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
746 tw100|toswin vt100 window mgr,
748 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
749 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
750 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
751 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
752 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
753 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
754 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
755 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
756 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
757 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
758 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
759 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
760 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
761 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
762 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
763 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
764 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
765 rmso=\E[m, rmul=\E[m,
766 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
768 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
769 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
770 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
771 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
772 # The entries for stv52 and stv52pc probably need a revision.
773 stv52|MiNT virtual console,
775 cols#80, it#8, lines#30,
776 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
777 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
778 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
779 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
780 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
781 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
782 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
783 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
784 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
785 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
786 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
787 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
788 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
789 stv52pc|MiNT virtual console with PC charset,
791 cols#80, it#8, lines#30,
792 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
793 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
794 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
795 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
796 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
797 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
798 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
799 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
800 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
801 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
802 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
803 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
804 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
807 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
810 cols#80, it#8, lines#25,
811 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
812 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
813 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
814 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
815 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
816 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
817 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
819 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
821 # MiNT VT52 emulation. 80 columns, 25 rows.
822 # MiNT is Now TOS, the operating system which comes with all Ataris now
823 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
824 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
825 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
826 st52-old|Atari ST with VT52 emulation,
829 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
830 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
831 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
832 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
833 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
834 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
835 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
836 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
837 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
840 #### Apple Terminal.app
842 # nsterm*|Apple_Terminal - AppKit Terminal.app
844 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
845 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
846 # Server and Mac OS X operating systems. There is also a
847 # "terminal.app" in GNUStep, but I believe it to be an unrelated
848 # codebase and I have not attempted to describe it here.
850 # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
851 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
852 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
853 # version supports color.
855 # To determine the version of Terminal.app you're using by running:
857 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
859 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
861 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
863 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
865 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
867 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
869 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
870 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
871 # might work too, but really you're on your own here since these
872 # systems are very obsolete and I can't test them. I do welcome
873 # patches, though :).
877 # For GNUstep_Terminal, you're probably best off using "linux" or
878 # writing your own terminfo.
880 # For MacTelnet, you're on your own. It's a different codebase, and
881 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
883 # For iTerm.app, see "iterm".
886 # The AppKit Terminal.app descriptions all have names beginning with
887 # "nsterm". Note that the statusline (-s) versions use the window
888 # titlebar as a phony status line, and may produce warnings during
889 # compilation as a result ("tsl uses 0 parameters, expected 1".)
890 # Ignore these warnings, or even ignore these entries entirely. Apps
891 # which need to position the cursor or do other fancy stuff inside the
892 # status line won't work with these entries. They're primarily useful
893 # for programs like Pine which provide simple notifications in the
894 # status line. Please note that non-ASCII characters don't work right
895 # in the status line, since Terminal.app incorrectly interprets their
896 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
897 # versions) or only accepts status lines consisting entirely of
898 # characters from the first 256 Unicode positions (including C1 but
901 # The Mythology* of AppKit Terminal.app:
903 # In the days of NeXTSTep 0.x and 1.x there were two incompatible
904 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
905 # shareware replacement for Terminal called "Stuart" which NeXT bought
906 # and used as the basis for the Terminal.app in NeXTstep 2+,
907 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
908 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
909 # capabilities for the early versions, but I believe that the
910 # TERM_PROGRAM_VERSION may have been reset at some point.
912 # The early versions were tailored to the NeXT character set. Sometime
913 # after the Apple aquisition the encoding was swiched to MacRoman
914 # (initally with serious altcharset bugs due to incomplete conversion
915 # of the old NeXT code,) and then later to UTF-8. Alos sometime during
916 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
917 # 8-color support (initially buggy when combined with attributes, but
918 # that was later fixed.) More recently, around Mac OS X version 10.3
919 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
920 # some versions (for instance 133-1 which shipped with Mac OS X
921 # version 10.4) this suffered from the <bce> bug, but that seems to
922 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
924 # In the early days of Mac OS X the terminal was fairly buggy and
925 # would routinely crash under load. Many of these bugs seem to have
926 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
927 # some may still remain. This change seems to correspond to
928 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
931 # * This may correspond with what actually happened, but I don't
932 # know. It is based on guesswork, hearsay, private correspondence,
933 # my faulty memory, and the following online sources and references:
935 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
936 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
938 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
939 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
941 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
942 # "nsterm" to comply with the name length and case conventions and
943 # limitations of various software packages [notably Solaris terminfo
944 # and UNIX.] A single Apple_Terminal alias is retained for
945 # backwards-compatbility.
947 # * Added function key support (F1-F4). These only work in Terminal.app
948 # version 51, hopefully the capabilities won't cause problems for people
951 # * Added "full color" (-c) entries which support the 16-color mode in
954 # * By default, version 51 uses UTF-8 encoding with broken altcharset
955 # support, so "ASCII" (-7) entries without altcharset support were
958 # nsterm - AppKit Terminal.app
960 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
961 # Terminal.app. It is a partial VT100 emulation with some xterm-like
962 # extensions. This terminfo was written to describe versions 41
963 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
964 # version 10.1) of Terminal.app.
966 # Terminal.app runs under the Mac OS X Quartz windowing system (and
967 # other AppKit-supported windowing systems.) On the Mac OS X machine I
968 # use, the executable for Terminal.app is:
969 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
971 # If you're looking for a description of the full-screen system
972 # console which runs under Apple's Darwin operating system on PowerPC
973 # platforms, see the "xnuppc" entry instead.
975 # There were no function keys in version 41. In version 51, there are
976 # four working function keys (F1, F2, F3 and F4.) The function keys
977 # are included in all of these entries.
979 # It does not support mouse pointer position reporting. Under some
980 # circumstances the cursor can be positioned using option-click; this
981 # works by comparing the cursor position and the selected position,
982 # and simulating enough cursor-key presses to move the cursor to the
983 # selected position. This technique fails in all but the simplest
986 # It provides partial ANSI color support (background colors interacted
987 # badly with bold in version 41, though, as reflected in :ncv:.) The
988 # monochrome (-m) entries are useful if you've disabled color support
989 # or use a monochrome monitor. The full color (-c) entries are useful
990 # in version 51, which doesn't exhibit the background color bug. They
991 # also enable an xterm-compatible 16-color mode.
993 # The configurable titlebar is set using xterm-compatible sequences;
994 # it is used as a status bar in the statusline (-s) entries. Its width
995 # depends on font sizes and window sizes, but 50 characters seems to
996 # be the default for an 80x24 window.
998 # The MacRoman character encoding is used for some of the alternate
999 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
1000 # disable alternate character set support entirely, and the "VT100"
1001 # (-acs) entries rely instead on Terminal.app's own buggy VT100
1002 # graphics emulation, which seems to think the character encoding is
1003 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
1004 # are useful in Terminal.app version 51, which supports UTF-8 and
1005 # other ASCII-compatible character encodings but does not correctly
1006 # implement VT100 graphics; once VT100 graphics are correctly
1007 # implemented in Terminal.app, the "VT100" (-acs) entries should be
1008 # usable in any ASCII-compatible character encoding [except perhaps
1009 # in UTF-8, where some experts argue for disallowing alternate
1010 # characters entirely.]
1012 # Terminal.app reports "vt100" as the terminal type, but exports
1013 # several environment variables which may aid detection in a shell
1014 # profile (i.e. .profile or .login):
1017 # TERM_PROGRAM=Apple_Terminal
1018 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
1019 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
1021 # For example, the following Bourne shell script would detect the
1022 # correct terminal type:
1024 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
1027 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
1035 # In a C shell derivative, this would be accomplished by:
1037 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
1038 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
1039 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
1040 # setenv TERM "nsterm-old"
1042 # setenv TERM "nsterm-c-7"
1047 # The '+' entries are building blocks
1048 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
1049 am, bw, msgr, xenl, xon,
1050 cols#80, it#8, lines#24,
1051 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1052 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1053 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1054 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1055 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
1056 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
1057 ind=^J, invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB,
1058 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
1059 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1060 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1061 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
1062 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1063 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
1065 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
1066 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1067 enacs=\E(B\E)0, rmacs=^O,
1068 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1069 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1071 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
1072 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245,
1073 enacs=\E(B\E)0, rmacs=^O,
1074 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1075 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
1077 # compare with xterm+sl-twm
1078 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
1079 wsl#50, use=xterm+sl-twm,
1081 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
1082 op=\E[0m, use=ibm+16color,
1084 nsterm+c41|AppKit Terminal.app v41 color support,
1085 colors#8, ncv#37, pairs#64,
1086 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1088 # These are different combinations of the building blocks
1090 # ASCII charset (-7)
1091 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
1094 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
1095 use=nsterm+s, use=nsterm+7,
1097 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
1098 use=nsterm+c41, use=nsterm+7,
1100 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
1101 use=nsterm+c, use=nsterm+7,
1103 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
1104 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
1106 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
1107 use=nsterm+s, use=nsterm+c, use=nsterm+7,
1109 # VT100 alternate-charset (-acs)
1110 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
1113 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
1114 use=nsterm+s, use=nsterm+acs,
1116 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
1117 use=nsterm+c41, use=nsterm+acs,
1119 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
1120 use=nsterm+c, use=nsterm+acs,
1122 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
1123 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
1125 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
1126 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
1129 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
1132 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
1133 use=nsterm+s, use=nsterm+mac,
1135 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
1136 use=nsterm+c41, use=nsterm+mac,
1138 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
1139 use=nsterm+c, use=nsterm+mac,
1141 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
1142 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
1144 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
1145 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
1147 # In Mac OS X version 10.5 the format of the preferences has changed
1148 # and a new, more complex technique is needed, e.g.,
1150 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
1151 # "NSUserDefaults");ud=NSUserDefaults.alloc();
1152 # ud.init();prefs=ud.persistentDomainForName_(
1153 # "com.apple.Terminal");prefs["Window Settings"][
1154 # prefs["Default Window Settings"]]["TerminalType"
1155 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
1156 # "com.apple.Terminal")' nsterm-16color
1158 # and it is still not settable from the preferences dialog. This is
1159 # tracked under rdar://problem/7365108 and rdar://problem/7365134
1160 # in Apple's bug reporter.
1162 # In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
1163 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
1164 # vt52, vt100, vt102 and xterm.
1165 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
1167 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
1168 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
1169 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
1170 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1171 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1172 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
1173 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
1174 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
1175 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
1176 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
1178 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
1179 # the background color erase feature. The newer version 240.2 in Mac OS X
1180 # version 10.5 does not.
1182 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
1183 # and D P Schreber comparing to nsterm-c-s-acs.
1185 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
1186 # can be set in Terminal.app, e.g.,
1188 # defaults write com.apple.Terminal TermCapString nsterm-bce
1190 # and that it is not set in Terminal's preferences dialog.
1192 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
1195 # * The terminal description matches the default settings.
1196 # * The keyboard is configurable via a dialog.
1197 # * By default khome, kend, knext and kprev are honored only with a
1199 # * There are bindings for control left/right arrow (but not up/down).
1200 # Added those to nsterm-16color, which is the version used for OS X 10.6
1201 # * "Allow VT100 application keypage mode" is by default disabled.
1202 # There is no way to press keypad-comma unless application mode is enabled
1204 # * 132-column mode stopped working during vttest's tests. Consider it broken.
1205 # * CHT, REP, SU, SD are buggy.
1206 # * ECH works (also in Leopard), but is not used here for compatibility.
1207 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
1208 # xterm-256color. However, it adds "nsterm", so it is possible to use the
1209 # nsterm entry from this file to override the MacPorts (20110404) or
1210 # system (20081102) copy of this file.
1211 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
1212 # dialog defaults to xterm-256color. Alternative selections are ansi,
1213 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
1214 # the menu says "Declare terminal as" without promising to actually emulate
1215 # the corresponding terminals. Indeed, changing TERM does not affect the
1216 # emulation itself. This means that
1217 # + the function-keys do not match for dtterm for kf1-kf4 as well as
1219 # + the color model is the same for each setting of TERM (does not match
1221 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
1222 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
1223 # + the vt52 emulation does not give a usable shell because screen-clearing
1224 # does not work as expected.
1225 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
1226 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
1227 # as well as unmasking F10 (which had been used in the window manager). Those
1228 # keys are listed in this entry.
1229 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
1230 bce, use=nsterm-16color,
1232 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
1233 # TERM_PROGRAM_VERSION=309
1234 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
1235 # TERM_PROGRAM_VERSION=303
1236 nsterm-256color|Terminal.app in OS X 10.8,
1237 use=xterm+256setaf, use=nsterm-bce,
1239 nsterm-build326|Terminal.app in OS X 10.9,
1240 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
1241 kf18=\E[32~, kDC5=\E[3;5~, kDC7=\E[3;5~, kLFT3=\Eb,
1242 kLFT5=\E[1;5D, kRIT3=\Ef, kRIT5=\E[1;5C,
1243 use=nsterm-256color,
1246 nsterm-build343|Terminal.app in OS X 10.10,
1247 kend=\EOF, khome=\EOH, use=nsterm-build326,
1249 # This is an alias which should always point to the "current" version
1250 nsterm|Apple_Terminal|AppKit Terminal.app,
1251 use=nsterm-build343,
1253 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
1254 # more featureful) terminal emulator for Mac OS X. It is similar
1255 # enough in capabilities to nsterm-16color that I have derived this
1256 # description from that one, but as far as I know they share no code.
1257 # Many of the features are user-configurable, but I attempt only to
1258 # describe the default configuration.
1260 # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
1262 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
1264 csr@, dim@, kend=\EOF, khome=\EOH,
1265 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1266 use=xterm+256setaf, use=nsterm-16color,
1268 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
1270 # On PowerPC platforms, Apple's Darwin operating system uses a
1271 # full-screen system console derived from a NetBSD framebuffer
1272 # console. It is an ANSI-style terminal, and is not really VT-100
1275 # Under Mac OS X, this is the system console driver used while in
1276 # single-user mode [reachable by holding down Command-S during the
1277 # boot process] and when logged in using console mode [reachable by
1278 # typing ">console" at the graphical login prompt.]
1280 # If you're looking for a description of the Terminal.app terminal
1281 # emulator which runs under the Mac OS X Quartz windowing system (and
1282 # other AppKit-supported windowing systems,) see the "nsterm"
1285 # NOTE: Under Mac OS X version 10.1, the default login window does not
1286 # prompt for user name, instead requiring an icon to be selected from
1287 # a list of known users. Since the special ">console" login is not in
1288 # this list, you must make one of two changes in the Login Window
1289 # panel of the Login section of System Prefs to make the special
1290 # ">console" login accessible. The first option is to enable 'Show
1291 # "Other User" in list for network users', which will add a special
1292 # "Other..." icon to the graphical login panel. Selecting "Other..."
1293 # will present the regular graphical login prompt. The second option
1294 # is to change the 'Display Login Window as:' setting to 'Name and
1295 # password entry fields', which replaces the login panel with a
1296 # graphical login prompt.
1298 # There are no function keys, at least not in Darwin 1.3.
1300 # It has no mouse support.
1302 # It has full ANSI color support, and color combines correctly with
1303 # all three supported attributes: bold, inverse-video and underline.
1304 # However, bold colored text is almost unreadable (bolding is
1305 # accomplished using shifting and or-ing, and looks smeared) so bold
1306 # has been excluded from the list of color-compatible attributes
1307 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
1308 # monochrome monitor.
1310 # There is one serious bug with this terminal emulation's color
1311 # support: repositioning the cursor onto a cell with non-matching
1312 # colors obliterates that cell's contents, replacing it with a blank
1313 # and displaying a colored cursor in the "current" colors. There is
1314 # no complete workaround at present [other than using the monochrome
1315 # (-m) entries,] but removing the (msgr) capability seemed to help.
1317 # The "standout" chosen was simple reverse-video, although a colorful
1318 # standout might be more aesthetically pleasing. Similarly, the bold
1319 # chosen is the terminal's own smeared bold, although a simple
1320 # color-change might be more readable. The color-bold (-b) entries
1321 # uses magenta colored text for bolding instead. The fancy color (-f
1322 # and -f2) entries use color for bold, standout and underlined text
1323 # (underlined text is still underlined, though.)
1325 # Apparently the terminal emulator does support a VT-100-style
1326 # alternate character set, but all the alternate character set
1327 # positions have been left blank in the font. For this reason, no
1328 # alternate character set capabilities have been included in this
1329 # description. The console driver appears to be ASCII-only, so (enacs)
1330 # has been excluded [although the VT-100 sequence does work.]
1332 # The default Mac OS X and Darwin installation reports "vt100" as the
1333 # terminal type, and exports no helpful environment variables. To fix
1334 # this, change the "console" entry in /etc/ttys from "vt100" to
1335 # "xnuppc-WxH", where W and H are the character dimensions of your
1336 # console (see below.)
1338 # The font used by the terminal emulator is apparently one originally
1339 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
1340 # file includes descriptions for the following geometries:
1342 # Pixels Characters Entry Name (append -m for monochrome)
1343 # -------------------------------------------------------------------
1344 # 640x400 80x25 xnuppc-80x25
1345 # 640x480 80x30 xnuppc-80x30
1346 # 720x480 90x30 xnuppc-90x30
1347 # 800x600 100x37 xnuppc-100x37
1348 # 896x600 112x37 xnuppc-112x37
1349 # 1024x640 128x40 xnuppc-128x40
1350 # 1024x768 128x48 xnuppc-128x48
1351 # 1152x768 144x48 xnuppc-144x48
1352 # 1280x1024 160x64 xnuppc-160x64
1353 # 1600x1024 200x64 xnuppc-200x64
1354 # 1600x1200 200x75 xnuppc-200x75
1355 # 2048x1536 256x96 xnuppc-256x96
1357 # The basic "xnuppc" entry includes no size information, and the
1358 # emulator includes no reporting capability, so you'll be at the mercy
1359 # of the TTY device (which reports incorrectly on my hardware.) The
1360 # color-bold entries do not include size information.
1362 # The '+' entries are building blocks
1363 xnuppc+basic|Darwin PowerPC Console basic capabilities,
1366 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1367 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
1368 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1369 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
1370 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
1371 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
1372 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
1373 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1375 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1376 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
1377 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
1379 xnuppc+c|Darwin PowerPC Console ANSI color support,
1380 colors#8, ncv#32, pairs#64,
1381 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1383 xnuppc+b|Darwin PowerPC Console color-bold support,
1386 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
1389 xnuppc+f|Darwin PowerPC Console fancy color support,
1391 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
1392 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
1394 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
1397 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
1398 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
1400 # Building blocks for specific screen sizes
1401 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
1404 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
1407 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
1410 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
1413 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
1416 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
1419 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
1422 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
1425 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
1428 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
1431 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
1434 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
1437 # These are different combinations of the building blocks
1439 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
1442 xnuppc|darwin|Darwin PowerPC Console (color),
1443 use=xnuppc+c, use=xnuppc+basic,
1445 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
1448 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
1449 use=xnuppc+b, use=xnuppc+c,
1451 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
1454 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
1455 use=xnuppc+f, use=xnuppc+c,
1457 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
1460 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
1461 use=xnuppc+f2, use=xnuppc+c,
1463 # Combinations for specific screen sizes
1464 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
1465 use=xnuppc+80x25, use=xnuppc+basic,
1467 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
1468 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
1470 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
1471 use=xnuppc+80x30, use=xnuppc+basic,
1473 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
1474 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
1476 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
1477 use=xnuppc+90x30, use=xnuppc+basic,
1479 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
1480 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
1482 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
1483 use=xnuppc+100x37, use=xnuppc+basic,
1485 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
1486 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
1488 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
1489 use=xnuppc+112x37, use=xnuppc+basic,
1491 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
1492 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
1494 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
1495 use=xnuppc+128x40, use=xnuppc+basic,
1497 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
1498 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
1500 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
1501 use=xnuppc+128x48, use=xnuppc+basic,
1503 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
1504 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
1506 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
1507 use=xnuppc+144x48, use=xnuppc+basic,
1509 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
1510 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
1512 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
1513 use=xnuppc+160x64, use=xnuppc+basic,
1515 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
1516 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
1518 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
1519 use=xnuppc+200x64, use=xnuppc+basic,
1521 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
1522 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
1524 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
1525 use=xnuppc+200x75, use=xnuppc+basic,
1527 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
1528 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
1530 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
1531 use=xnuppc+256x96, use=xnuppc+basic,
1533 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
1534 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
1539 # BeOS entry for Terminal program Seems to be almost ANSI
1540 beterm|BeOS Terminal,
1541 am, eo, mir, msgr, xenl, xon,
1542 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
1543 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1544 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1545 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1546 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1547 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1548 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
1549 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1550 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1551 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
1552 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
1553 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
1554 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
1555 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
1556 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
1557 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
1558 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1559 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
1560 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
1561 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
1567 # This entry is good for the 1.2.13 or later version of the Linux console.
1569 # ***************************************************************************
1572 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
1573 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
1574 # * character. Here are the keymap replacement lines that will set this up: *
1576 # keycode 15 = Tab Tab
1577 # alt keycode 15 = Meta_Tab
1578 # shift keycode 15 = F26
1579 # string F26 ="\033[Z"
1581 # * This has to use a key slot which is unfortunate (any unused one will *
1582 # * do, F26 is the higher-numbered one). The change ought to be built *
1583 # * into the kernel tables. *
1585 # ***************************************************************************
1587 # All linux kernels since 1.2.13 (at least) set the screen size
1588 # themselves; this entry assumes that capability.
1590 linux-basic|linux console,
1591 am, bce, eo, mir, msgr, xenl, xon,
1593 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1594 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1595 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1596 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1597 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
1598 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1599 el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
1600 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
1601 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
1602 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1603 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
1604 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1605 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1606 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
1607 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1608 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1609 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1610 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
1611 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1612 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
1613 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
1616 linux-m|Linux console no color,
1618 setab@, setaf@, setb@, setf@, use=linux,
1620 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
1621 # and it matters, turn off <ccc>. The %02x escape used to implement this is
1622 # not supposedly back-portable to older SV curses (although it has worked fine
1623 # on Solaris for several years) and not supported in ncurses versions before
1625 linux-c-nc|linux console with color-change,
1627 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
1628 oc=\E]R, use=linux-basic,
1629 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1630 linux-c|linux console 1.3.6+ for older ncurses,
1632 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
1633 oc=\E]R, use=linux-basic,
1635 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1636 # get a block cursor for cvvis.
1637 # reported by Frank Heckenbach <frank@g-n-u.de>.
1638 linux2.2|linux 2.2.x console,
1639 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1640 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1642 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1643 # http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
1644 # Using SI/SO has the drawback that it confuses screen. SCS would work.
1645 # However, SCS is buggy (see comment in Debian #515609) -TD
1646 # Further, this breaks longstanding workarounds for Linux console's line
1647 # drawing (see Debian 665959) -TD
1648 linux2.6|linux 2.6.x console,
1650 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1651 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1653 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1654 # It is the same as xterm's erase-saved-lines feature.
1655 linux3.0|linux 3.0 kernels,
1656 E3=\E[3J, use=linux2.6,
1658 # This is Linux console for ncurses.
1659 linux|linux console,
1662 # Subject: linux 2.6.26 vt back_color_erase
1663 # Changes to the Linux console driver broke bce model as reported in
1664 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1666 # http://lkml.org/lkml/2008/4/26/305
1667 # http://lkml.org/lkml/2008/10/3/66
1668 linux2.6.26|linux console w/o bce,
1671 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1672 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1673 ich@, ich1@, use=linux,
1675 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1676 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1677 linux-koi8|linux with koi8 alternate character set,
1678 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
1679 use=linux, use=klone+koi8acs,
1681 # Another entry for KOI8-r with Qing Long's acsc.
1682 # (which one better complies with the standard?)
1683 linux-koi8r|linux with koi8-r alternate character set,
1684 use=linux, use=klone+koi8acs,
1686 # Entry for the latin1 and latin2 fonts
1687 linux-lat|linux with latin1 or latin2 alternate character set,
1688 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1691 # This uses graphics from VT codeset instead of from cp437.
1692 # reason: cp437 (aka "straight to font") is not functional under luit.
1693 # from: Andrey V Lukyanov <land@long.yar.ru>.
1694 linux-vt|linux console using VT codes for graphics,
1695 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1696 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1699 # This is based on the Linux console (relies on the console to perform some
1700 # of the functionality), but does not recognize as many control sequences.
1701 # The program comes bundled with an old (circa 1998) copy of the Linux
1702 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1703 # \E* move cursor to home, as as \E[H
1705 # \EE move cursor to beginning of row
1706 # \E[y,xf same as \E[y,xH
1708 # Note: The status-line support is buggy (dsl does not work).
1709 kon|kon2|jfbterm|Kanji ON Linux console,
1711 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1712 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1715 # 16-color linux console entry; this works with a 256-character
1716 # console font but bright background colors turn into dim ones when
1717 # you use a 512-character console font. This uses bold for bright
1718 # foreground colors and blink for bright background colors.
1719 linux-16color|linux console with 16 colors,
1720 colors#16, ncv#63, pairs#256,
1721 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1722 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
1725 # bterm (bogl 0.1.18)
1726 # Implementation is in bogl-term.c
1727 # Key capabilities from linux terminfo entry
1730 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1731 # bterm does not support sgr, since it only processes one parameter -TD
1732 bterm|bogl virtual terminal,
1734 colors#8, cols#80, lines#24, pairs#64,
1735 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1736 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
1737 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
1738 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1739 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1740 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1741 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1742 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1743 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1744 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1745 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
1746 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1747 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1748 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1753 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1756 cols#80, it#8, lines#25,
1757 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
1758 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1759 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1760 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1761 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
1762 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1763 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1764 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1765 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1766 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1767 smso=\E[7m, smul=\E[4m,
1768 mach-bold|Mach Console with bold instead of underline,
1769 rmul=\E[0m, smul=\E[1m, use=mach,
1770 mach-color|Mach Console with ANSI color,
1772 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1773 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1775 # From: Samuel Thibault
1776 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1777 # Files: i386/i386at/kd.c
1779 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1781 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1782 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1783 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1784 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
1785 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m,
1788 mach-gnu-color|Mach Console with ANSI color,
1790 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1791 setaf=\E[3%p1%dm, use=mach-gnu,
1793 # From: Marcus Brinkmann
1794 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1796 # Comments in the original are summarized here:
1798 # hurd uses 8-bit characters (km).
1800 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1802 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1803 # have the eat_newline_glitch. It doesn't support setting or removing tab
1806 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1807 # one byte instead three.
1809 # <ich1> is not included because hurd has insert mode.
1811 # hurd doesn't use ^J for scrolling, because this could put things into the
1812 # scrollback buffer.
1814 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1815 # This is a GNU extension.
1817 # The original has commented-out ncv, but is restored here.
1819 # Reading the source, RIS resets cnorm, but not xmous.
1820 hurd|The GNU Hurd console server,
1821 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1822 colors#8, it#8, ncv#18, pairs#64,
1823 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1824 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1825 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1826 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1827 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1828 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1829 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1830 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1831 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1832 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
1833 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
1834 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1835 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
1836 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1837 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1838 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
1839 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1840 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1841 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1842 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
1843 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
1844 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1845 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1846 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
1847 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
1854 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1855 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1856 # right corner without triggering a scroll. The ncurses terminfo library can
1857 # handle this case with the <ich1> capability, and prefers <am> for better
1858 # optimization. Bug: The <op> capability resets attributes.
1859 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1860 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1861 qnx|qnx4|qnx console,
1862 daisy, km, mir, msgr, xhpa, xt,
1863 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1864 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1865 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1866 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1867 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1868 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1869 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1870 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1871 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1872 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1873 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1874 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1875 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1876 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1877 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1878 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1879 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1880 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1881 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1882 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1883 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1884 kext=\377\270, kf1=\377\201, kf10=\377\212,
1885 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1886 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1887 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1888 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1889 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1890 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1891 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1892 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1893 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1894 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1895 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1896 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1897 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1898 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1899 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1900 khlp=\377\350, khome=\377\240, khts=\377\342,
1901 kich1=\377\253, kil1=\377\273, kind=\377\261,
1902 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1903 knp=\377\252, knxt=\377\312, kopn=\377\357,
1904 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1905 kprv=\377\302, krdo=\377\336, kref=\377\354,
1906 kres=\377\360, krfr=\377\347, kri=\377\271,
1907 krmir=\377\313, krpl=\377\362, krst=\377\352,
1908 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1909 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1910 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1911 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1912 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1916 qnxt|qnxt4|QNX4 terminal,
1919 qnxm|QNX4 with mouse events,
1921 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1922 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1923 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1924 smicm=\E/>2h, use=qnx4,
1929 # Monochrome QNX4 terminal or console. Setting this terminal type will
1930 # allow an application running on a color console to behave as if it
1931 # were a monochrome terminal. Output will be through stdout instead of
1932 # console writes because the term routines will recognize that the
1933 # terminal name starts with 'qnxt'.
1935 qnxtmono|Monochrome QNX4 terminal or console,
1939 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1940 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1941 # (TD: derive from original qnx4 entry)
1942 qnxt2|qnx 2.15 serial terminal,
1944 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1945 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1947 # QNX ANSI terminal definition
1950 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1951 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1952 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1953 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
1954 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1955 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1956 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1957 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1958 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1959 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1960 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1961 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1962 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
1963 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1964 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1965 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1966 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1967 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1968 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1969 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1970 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1971 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1972 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1973 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1974 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1975 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1976 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1977 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1978 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1979 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1980 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1981 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1982 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1983 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1984 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1985 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1986 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
1987 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1988 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1989 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1990 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1991 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1992 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1993 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1994 smul=\E[4m, tbc=\E[3g,
1995 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
1997 qansi|QNX ansi with console writes,
1998 daisy, xhpa, use=qansi-g,
2000 qansi-t|QNX ansi without console writes,
2003 qansi-m|QNX ansi with mouse,
2005 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
2006 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
2007 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
2008 smicm=\E[>2h, use=qansi,
2010 qansi-w|QNX ansi for windows,
2015 # SCO console and SOS-Syscons console for 386bsd
2016 # (scoansi: had unknown capabilities
2017 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
2018 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
2019 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
2020 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
2021 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
2022 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
2023 # on the <smacs>=\E[12m -- esr)
2025 # klone+sgr-dumb is an error since the acsc does not match -TD
2027 # In this description based on SCO's keyboard(HW) manpage list of default
2028 # function key values:
2029 # F13-F24 are shifted F1-F12
2030 # F25-F36 are control F1-F12
2031 # F37-F48 are shift+control F1-F12
2033 # hpa/vpa work in the console, but not in scoterm:
2037 # SCO's terminfo uses
2040 # which do not work (console or scoterm).
2042 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
2043 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
2044 OTbs, am, bce, eo, xon,
2045 colors#8, cols#80, it#8, lines#25, pairs#64,
2046 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
2047 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
2048 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
2049 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
2050 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2051 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
2052 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
2053 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
2054 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
2055 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
2056 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2057 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
2058 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
2059 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
2060 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
2061 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
2062 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
2063 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
2064 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
2065 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
2066 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
2067 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
2068 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
2069 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
2070 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
2071 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
2072 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
2074 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
2075 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
2076 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
2077 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m,
2078 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
2079 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
2080 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
2081 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
2082 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
2084 # make this easy to change...
2085 scoansi|SCO Extended ANSI standard crt,
2090 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
2091 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
2092 # for the application keypad mode. We have added iris-ansi-ap rather than
2093 # change the original to keypad mode.
2095 # (iris-ansi: added rmam/smam based on init string -- esr)
2097 # This entry, and those derived from it, is used in xwsh (also known as
2098 # winterm). Some capabilities that do not fit into the terminfo model
2099 # include the shift- and control-functionkeys:
2101 # F1-F12 generate different codes when shift or control modifiers are used.
2105 # control-F1 \E[025q
2107 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
2108 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
2110 # The cursor keys also have different codes:
2111 # control-up \E[162q
2112 # control-down \E[165q
2113 # control-left \E[159q
2114 # control-right \E[168q
2117 # shift-down \E[164q
2118 # shift-left \E[158q
2119 # shift-right \E[167q
2121 # control-tab \[072q
2123 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
2125 cols#80, it#8, lines#40,
2126 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
2127 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
2128 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
2129 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
2130 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
2131 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
2132 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2133 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
2134 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
2135 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2136 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
2137 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
2138 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
2139 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
2140 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
2141 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
2142 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
2143 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
2144 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
2146 iris-ansi-ap|IRIS ANSI in application-keypad mode,
2147 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
2148 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
2150 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
2151 # (T.Dickey 98/1/24)
2152 iris-color|xwsh|IRIX ANSI with color,
2154 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
2155 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
2156 rmul=\E[24m, rs1=\Ec,
2157 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2158 sitm=\E[3m, use=vt100+enq, use=klone+color,
2161 #### OpenBSD consoles
2163 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
2165 # The following terminal descriptions for the AMD/Intel PC console
2166 # were prepared based on information contained in the OpenBSD-4.9
2167 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
2169 # Added bce based on testing with tack -TD
2170 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
2171 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
2173 pccon+keys|OpenBSD PC keyboard keys,
2174 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2175 kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
2176 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2177 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2178 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2180 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
2181 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
2182 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
2183 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
2184 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2185 enacs=\E)0$<5>, rmacs=\E(B$<5>,
2186 sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
2187 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
2188 pccon+colors|ANSI colors for OpenBSD PC console,
2191 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2192 pccon+base|base capabilities for OpenBSD PC console,
2193 am, km, mc5i, msgr, npc, nxon, xenl, xon,
2194 cols#80, it#8, lines#24,
2195 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
2196 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
2197 dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2198 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2199 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2200 rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
2201 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2202 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
2203 use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
2204 pccon0|OpenBSD PC console with simple ASCII pseudographics,
2205 use=pccon0-m, use=pccon+colors,
2206 pccon-m|OpenBSD PC console without colors,
2207 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
2208 pccon|OpenBSD PC console,
2209 use=pccon-m, use=pccon+colors,
2211 #### NetBSD consoles
2213 # pcvt termcap database entries (corresponding to release 3.31)
2214 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
2216 # (For the terminfo master file, I translated these into terminfo syntax.
2217 # Then I dropped all the pseudo-HP entries. we don't want and can't use
2218 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
2219 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
2221 # NOTE: <ich1> has been taken out of this entry. for reference, it should
2222 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
2223 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
2224 pcvtXX|pcvt vt200 emulator (DEC VT220),
2225 am, km, mir, msgr, xenl,
2227 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
2228 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2229 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
2230 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2231 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2232 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2233 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2234 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2235 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
2236 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
2237 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2238 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
2239 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
2240 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
2241 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
2242 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
2243 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
2244 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2245 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2246 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2248 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2249 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2250 # 50 lines entries; 80 columns
2251 pcvt25|dec vt220 emulation with 25 lines,
2253 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2254 pcvt28|dec vt220 emulation with 28 lines,
2256 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2257 pcvt35|dec vt220 emulation with 35 lines,
2259 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2260 pcvt40|dec vt220 emulation with 40 lines,
2262 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2263 pcvt43|dec vt220 emulation with 43 lines,
2265 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2266 pcvt50|dec vt220 emulation with 50 lines,
2268 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2270 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
2271 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
2272 # 50 lines entries; 132 columns
2273 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
2275 is2=\E[1;25r\E[25;1H, use=pcvtXX,
2276 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
2278 is2=\E[1;28r\E[28;1H, use=pcvtXX,
2279 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
2281 is2=\E[1;35r\E[35;1H, use=pcvtXX,
2282 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
2284 is2=\E[1;40r\E[40;1H, use=pcvtXX,
2285 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
2287 is2=\E[1;43r\E[43;1H, use=pcvtXX,
2288 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
2290 is2=\E[1;50r\E[50;1H, use=pcvtXX,
2292 # OpenBSD implements a color variation
2293 pcvt25-color|dec vt220 emulation with 25 lines and color,
2295 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
2296 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2297 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2298 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2299 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
2302 # Terminfo entries to enable the use of the ncurses library in colour on a
2303 # NetBSD-arm32 console (only tested on a RiscPC).
2304 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
2305 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
2306 # typo in invis - TD
2307 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
2308 am, bce, msgr, xenl, xon,
2309 cols#80, it#8, lines#30,
2310 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2311 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2312 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2313 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2314 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2315 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2316 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2317 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
2318 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
2319 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2320 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
2321 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
2322 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
2323 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
2324 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2326 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
2327 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2328 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
2331 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
2332 cols#132, lines#50, use=arm100,
2334 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
2335 # manufactured by Sharp for the Japenese market.
2336 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
2337 x68k|x68k-ite|NetBSD/x68k ITE,
2339 kclr=\E[9~, khlp=\E[28~, use=vt220,
2342 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
2344 # (still unfinished, but good enough so far.)
2345 ofcons|DNARD OpenFirmware console,
2348 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
2349 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
2350 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
2351 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
2352 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
2353 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
2354 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
2355 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
2356 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
2357 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
2358 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
2359 rmso=\2330m, rmul=\2330m,
2360 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m,
2361 sgr0=\2330m, smso=\2337m, smul=\2334m,
2363 # NetBSD "wscons" emulator in vt220 mode.
2364 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
2365 # The emulator renders underlined text in red. Colors are otherwise usable.
2367 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
2368 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
2369 # vt220 screens in vttest do not work with this emulator. For instance, it
2370 # identifies itself (primary DA response) as a vt220 with selective erase. But
2371 # the selective erase feature does not work. The secondary response is copied
2372 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
2373 # the level of detail in a termcap, it is a passable emulator, since ECH does
2374 # work. Don't use it on a VMS system -TD
2375 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
2377 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
2378 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
2379 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
2380 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
2381 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2382 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
2383 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
2385 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
2388 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
2390 # TERM is by default vt100 for the console, wsvt25 for other ttys.
2391 # Initial testing set TERM=xterm, based on comments by developers, found too
2392 # many differences to continue in that path. However, test-results may be
2393 # useful to people curious about compatibility with xterm.
2395 # Testing with tack:
2397 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
2398 # There is color-bleeding in the color-pairs screen.
2399 # Attributes do not work with color
2401 # Failed: kf1-kf4, kf13-kf48, khome, kend
2402 # (effectively xterm-r6 for function-keys)
2403 # None of the function or cursor key-modifiers are encoded.
2404 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
2406 # Testing with vttest:
2407 # -------------------
2408 # Identifies as vt220 with selective erase
2409 # (however, selective erase refers to DECSCA, SPA)
2410 # Does not implement vt52
2411 # Uses spaces to simulate double-size characters
2412 # Does not support 8-bit controls
2413 # Does not support VT220 reports
2414 # Does not support send/receive mode
2415 # Supports ECH (like rxvt)
2416 # Does not support DECSCA
2417 # Does not support any of the ISO-6429 cursor-movement
2418 # Does not support any of the ISO-6429 miscellaneous tests
2419 # (SL/SR also leave unexpected char on screen too)
2420 # Background does not change in menu 11.6.9 (SGR 22-27)
2421 # None of the xterm special features tests work
2422 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
2423 kbs=\177, use=wsvt25,
2425 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
2427 rcons|BSD rasterconsole,
2429 # Color version of above. Color currently only provided by NetBSD.
2430 rcons-color|BSD rasterconsole with ANSI color,
2433 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
2435 # mgterm -- MGL/MGL2, MobileGear Graphic Library
2436 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
2437 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
2438 # -- compare with cons25w
2440 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
2441 colors#8, cols#80, it#8, lines#18, pairs#64,
2442 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2443 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2444 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2445 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2446 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
2447 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2448 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2449 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2450 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2451 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2452 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
2453 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
2454 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
2455 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
2456 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
2457 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2459 #### FreeBSD console entries
2461 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
2462 # Andrey Chernov maintains the FreeBSD termcap distributions.
2464 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
2465 # or comment out the :cb: capability in the console entry.
2467 # Alexander Lukyanov reports:
2468 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
2469 # Now el1 clears not only to the line beginning, but also a large chunk
2470 # of previous line. But there is another bug - ech does not work at all.
2474 # common entry without semigraphics
2475 # Bug: The <op> capability resets attributes.
2476 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
2477 # instance el1 does if the cursor is moved to the right margin first. Removed
2478 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
2480 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
2481 # Note that this disables standout with color.
2483 # The emulator sends difference strings based on shift- and control-keys,
2485 # F13-F24 are shifted F1-F12
2486 # F25-F36 are control F1-F12
2487 # F37-F48 are shift+control F1-F12
2488 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
2489 am, bce, bw, eo, msgr, npc,
2490 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
2491 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
2492 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
2493 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
2494 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2495 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
2496 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
2497 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
2498 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
2499 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
2500 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
2501 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
2502 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
2503 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
2504 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
2505 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
2506 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
2507 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
2508 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
2509 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
2510 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
2511 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
2512 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
2513 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2514 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2515 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
2516 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
2517 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
2519 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
2520 kbs=\177, kdch1=\E[3~, use=cons25,
2521 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
2523 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2524 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2525 smul=\E[4m, use=cons25,
2526 cons30|ansi80x30|freebsd console (30-line ansi mode),
2527 lines#30, use=cons25,
2528 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
2529 lines#30, use=cons25-m,
2530 cons43|ansi80x43|freebsd console (43-line ansi mode),
2531 lines#43, use=cons25,
2532 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
2533 lines#43, use=cons25-m,
2534 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
2535 lines#50, use=cons25,
2536 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
2537 lines#50, use=cons25-m,
2538 cons60|ansi80x60|freebsd console (60-line ansi mode),
2539 lines#60, use=cons25,
2540 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
2541 lines#60, use=cons25-m,
2542 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
2543 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
2545 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2547 op@, rmul=\E[m, setab@, setaf@,
2548 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
2549 smul=\E[4m, use=cons25r,
2550 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2551 lines#50, use=cons25r,
2552 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2553 lines#50, use=cons25r-m,
2554 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2555 lines#60, use=cons25r,
2556 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2557 lines#60, use=cons25r-m,
2558 # ISO 8859-1 FreeBSD console
2559 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2560 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
2562 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2564 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2565 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2566 smul=\E[4m, use=cons25l1,
2567 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2568 lines#50, use=cons25l1,
2569 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2570 lines#50, use=cons25l1-m,
2571 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2572 lines#60, use=cons25l1,
2573 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2574 lines#60, use=cons25l1-m,
2576 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2577 # which is intended to be xterm-compatible. See for example
2578 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2579 # in particular scterm-teken.c
2581 # For FreeBSD 9 and 10:
2582 # --------------------
2583 # The /etc/ttys entries for console and other ttys are all configured to set
2586 # Testing with tack:
2587 # There is no VT100 line-drawing (uses +'s and -'s)
2588 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2590 # Testing with vttest:
2591 # Menu 2 diamonds don't work, blink ditto, light background ditto
2592 # The terminal identifies itself as VT100 with AVO
2593 # There is no VT52 support
2594 # There is no doublesize character support
2595 # The terminal supports ECH (like rxvt)
2596 # The terminal does not support send/receive mode
2597 # The terminal supports all of the ISO-6429 cursor-movement
2598 # The terminal supports some of the ISO-6429 miscellaneous tests
2599 # (SL/SR also leave unexpected char on screen too)
2601 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2602 # the cells which happen to have ASCII control-character values:
2603 # - ^X arrow pointing up
2604 # . ^Y arrow pointing down
2608 # Those are removed from this entry's acsc string to avoid confusion.
2609 # The resulting description provides correct line-drawing and function-keys -TD
2610 teken|syscons with teken,
2612 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
2613 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2614 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2615 kdch1=\E[3~, kend=\E[F, kent=^M, kf1=\EOP, kf10=\E[21~,
2616 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2617 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2618 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2619 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2620 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2622 #### 386BSD and BSD/OS Consoles
2625 # This was the original 386BSD console entry (I think).
2626 # Some places it's named oldpc3|oldibmpc3.
2627 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2628 origpc3|origibmpc3|IBM PC 386BSD Console,
2629 OTbs, am, bw, eo, xon,
2631 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
2632 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2633 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2634 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2635 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2636 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2637 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2639 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2640 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2643 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
2644 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2645 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2646 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
2648 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2649 # Note, the emulator supports many of the additional console features
2650 # listed in the iBCS2 (e.g. character-set selection) though not all
2651 # are described here. This entry really ought to be upgraded.
2652 # Also note, the console will also work with fewer lines after doing
2653 # "stty rows NN", e.g. to use 24 lines.
2654 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2655 # Bug: The <op> capability resets attributes.
2656 bsdos-pc|IBM PC BSD/OS Console,
2657 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2658 use=bsdos-pc-nobold,
2660 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2661 use=klone+color, use=bsdos-pc-m,
2663 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2664 OTbs, am, eo, km, xon,
2665 cols#80, it#8, lines#25,
2666 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
2667 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2668 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2669 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2670 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
2671 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2672 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
2673 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2676 # Old names for BSD/OS PC console used in releases before 4.1.
2677 pc3|BSD/OS on the PC Console,
2678 use=bsdos-pc-nobold,
2679 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2682 # BSD/OS on the SPARC
2683 bsdos-sparc|Sun SPARC BSD/OS Console,
2686 # BSD/OS on the PowerPC
2687 bsdos-ppc|PowerPC BSD/OS Console,
2692 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2694 # Actually (TD pointed this out at the time the acsc string was added):
2695 # vt52 shouldn't define full acsc since most of the cells don't match.
2696 # see vt100 manual page A-31. This is the list that does match:
2705 # The line-drawing happens to work in several terminal emulators, but should
2706 # not be used as a guide to the capabilities of the vt52. Note in particular
2707 # that vt52 does not support line-drawing characters (the scan-X values refer
2708 # to a crude plotting feature) -TD
2711 cols#80, it#8, lines#24,
2712 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
2713 cub1=\ED, cud1=\EB, cuf1=\EC,
2714 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2715 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2716 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2718 #### DEC VT100 and compatibles
2720 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2721 # and micro consoles can be found in the `obsolete' section. More details on
2722 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2723 # found near the end of this file.
2725 # Except where noted, these entries are DEC's official terminfos.
2726 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2727 # Engineering for more information. Updated terminfos and termcaps
2728 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2730 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2731 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2732 # its name to Boundless Technologies; see http://www.boundless.com.
2735 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2736 # certainly includes what DEC called the `Level 1 editing extension' codes;
2737 # only the very oldest VT100s lacked these and there probably aren't any of
2738 # those left alive. To capture these, use one of the VT102 entries.
2740 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2741 # since the cursor is left in a different position while in the
2742 # weird state (concept at beginning of next line, vt100 at end
2743 # of this line) so all versions of vi before 3.7 don't handle
2744 # <xenl> right on vt100. The correct way to handle <xenl> is when
2745 # you output the char in column 80, immediately output CR LF
2746 # and then assume you are in column 1 of the next line. If <xenl>
2747 # is on, am should be on too.
2749 # I assume you have smooth scroll off or are at a slow enough baud
2750 # rate that it doesn't matter (1200? or less). Also this assumes
2751 # that you set auto-nl to "on", if you set it off use vt100-nam
2754 # The padding requirements listed here are guesses. It is strongly
2755 # recommended that xon/xoff be enabled, as this is assumed here.
2757 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2758 # tab settings are in non-volatile memory and don't need to be
2759 # reset upon login. Also setting the number of columns glitches
2760 # the screen annoyingly. You can type "reset" to get them set.
2762 # The VT100 series terminals have cursor ("arrows") keys which can operate
2763 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2764 # is the reset state, and is assumed to be the normal state. Application
2765 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2766 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2767 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2768 # was provided primarily as an aid to the porting of VT52 applications. It is
2769 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2770 # applications such as vi will always transmit the <smkx> string. Therefore,
2771 # the definitions for the cursor keys are made to match what the terminal
2772 # transmits after the <smkx> string is transmitted. If the <smkx> string
2773 # is a null string or is not defined, then cursor keys are assumed to be in
2774 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2775 # else the application may fail. It is also expected that applications will
2776 # always transmit the <rmkx> string to the terminal before they exit.
2778 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2779 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2780 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2781 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2782 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2783 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2784 # Enter key transmits the same as the Return key (Note: the Return key
2785 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2786 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2787 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2788 # is normally in Numeric Mode. If an application requires that the keypad be
2789 # in Application Mode then it is expected that the user, or the application,
2790 # will set the TERM environment variable to point to a terminfo entry which has
2791 # defined the <smkx> string to include the codes that switch the keypad into
2792 # Application Mode, and the terminfo entry will also define function key
2793 # fields to match the Application Mode control codes. If the <smkx> string
2794 # is a null string or is not defined, then the keypad is assumed to be in
2795 # Numeric Mode. If the <smkx> string switches the keypad into Application
2796 # Mode, it is expected that the <rmkx> string will contain the control codes
2797 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2798 # applications which transmit the <smkx> string will also always transmit the
2799 # <rmkx> string to the terminal before they exit.
2801 # Here's a diagram of the VT100 keypad keys with their bindings.
2802 # The top line is the name of the key (some DEC keyboards have the keys
2803 # labelled somewhat differently, like GOLD instead of PF1, but this is
2804 # the most "official" name). The second line is the escape sequence it
2805 # generates in Application Keypad mode (where "$" means the ESC
2806 # character). The third line contains two items, first the mapping of
2807 # the key in terminfo, and then in termcap.
2808 # _______________________________________
2809 # | PF1 | PF2 | PF3 | PF4 |
2810 # | $OP | $OQ | $OR | $OS |
2811 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2813 # | $Ow | $Ox | $Oy | $Om |
2814 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2816 # | $Ot | $Ou | $Ov | $Ol |
2817 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2819 # | $Oq | $Or | $Os | enter |
2820 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2823 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2825 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2826 # terminfo guidelines. That is a compromise used to assign the remaining
2827 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2829 vt100+keypad|dec vt100 numeric keypad no fkeys,
2830 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2831 vt100+pfkeys|dec vt100 numeric keypad,
2832 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2834 vt100+fnkeys|dec vt100 numeric keypad,
2835 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2836 kf9=\EOw, use=vt100+pfkeys,
2838 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2839 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2840 # use the 5-key arrangement to model the arrow keys as suggested in the
2841 # terminfo guidelines:
2842 # _______________________________________
2843 # | PF1 | PF2 | PF3 | PF4 |
2844 # | $OP | $OQ | $OR | $OS |
2845 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2847 # | $Ow | $Ox | $Oy | $Om |
2848 # |_ka1__K1_|_________|_ka3__K3_|_________|
2850 # | $Ot | $Ou | $Ov | $Ol |
2851 # |_________|_kb2__K2_|_________|_________|
2853 # | $Oq | $Or | $Os | enter |
2854 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2857 # |___________________|_________|_kent_@8_|
2859 vt220+keypad|dec vt220 numeric keypad,
2860 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2861 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2864 vt100+enq|ncurses extension for vt100-style ENQ,
2865 u8=\E[?1;2c, use=ansi+enq,
2866 vt102+enq|ncurses extension for vt102-style ENQ,
2867 u8=\E[?6c, use=ansi+enq,
2869 # And here, for those of you with orphaned VT100s lacking documentation, is
2870 # a description of the soft switches invoked when you do `Set Up'.
2872 # Scroll 0-Jump Shifted 3 0-#
2873 # | 1-Smooth | 1-British pound sign
2874 # | Autorepeat 0-Off | Wrap Around 0-Off
2876 # | | Screen 0-Dark Bkg | | New Line 0-Off
2877 # | | | 1-Light Bkg | | | 1-On
2878 # | | | Cursor 0-Underline | | | Interlace 0-Off
2879 # | | | | 1-Block | | | | 1-On
2881 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2883 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2884 # | | | 1-On | | | 1-50 Hz
2885 # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2886 # | | 1-ANSI | | 1-8 Bits
2887 # | Keyclick 0-Off | Parity 0-Off
2889 # Margin Bell 0-Off Parity Sense 0-Odd
2892 # The following SET-UP modes are assumed for normal operation:
2893 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2894 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2895 # Other SET-UP modes may be set for operator convenience or communication
2896 # requirements; I recommend
2897 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2898 # Unless you have a graphics add-on such as Digital Engineering's VT640
2899 # (and even then, whenever it can be arranged!) you should set
2902 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2903 vt100|vt100-am|dec vt100 (w/advanced video),
2904 OTbs, am, mc5i, msgr, xenl, xon,
2905 cols#80, it#8, lines#24, vt#3,
2906 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2907 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2908 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2909 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2910 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2911 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2912 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2913 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
2914 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
2915 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
2916 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
2917 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
2918 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2919 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
2920 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
2921 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
2923 vt100nam|vt100-nam|vt100 no automargins,
2924 am@, xenl@, use=vt100-am,
2925 vt100-vb|dec vt100 (w/advanced video) & no beep,
2926 bel@, flash=\E[?5h\E[?5l, use=vt100,
2928 # Ordinary vt100 in 132 column ("wide") mode.
2929 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2931 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2932 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2933 cols#132, lines#14, vt@,
2934 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2936 # vt100 with no advanced video.
2937 vt100-nav|vt100 without advanced video option,
2939 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2941 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2942 cols#132, lines#14, use=vt100-nav,
2944 # vt100 with one of the 24 lines used as a status line.
2945 # We put the status line on the top.
2946 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2949 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2950 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2951 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2952 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2954 # Status line at bottom.
2955 # Clearing the screen will clobber status line.
2956 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2959 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2960 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2962 # Most of the `vt100' emulators out there actually emulate a vt102
2963 # This entry (or vt102-nsgr) is probably the right thing to use for
2966 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2968 vt102-w|dec vt102 in wide mode,
2970 rs3=\E[?3h, use=vt102,
2972 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2973 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2974 # string in the canonical vt100 entry above leaves the screen littered
2975 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2976 # after highlight turnoffs. This entry should fix that, and even leave
2977 # ACS support working, at the cost of making multiple-highlight changes
2978 # slightly more expensive.
2979 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2980 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2981 sgr@, sgr0=\E[m, use=vt102,
2983 # VT125 Graphics CRT. Clear screen also erases graphics
2984 # Some vt125's came configured with vt102 support.
2985 vt125|vt125 graphics terminal,
2987 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2989 # This isn't a DEC entry, it came from University of Wisconsin.
2990 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2993 cols#80, it#8, lines#24, vt#3,
2994 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2995 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2996 cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
2997 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2998 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2999 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
3000 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
3001 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
3002 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
3004 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3005 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
3006 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3008 # vt132 - like vt100 but slower and has ins/del line and such.
3009 # I'm told that <smir>/<rmir> are backwards in the terminal from the
3010 # manual and from the ANSI standard, this describes the actual
3011 # terminal. I've never actually used a vt132 myself, so this
3016 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
3017 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
3019 # This vt220 description maps F5--F9 to the second block of function keys
3020 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
3021 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
3022 # PF1--PF4 are used as F1--F4.
3025 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
3026 OTbs, OTpt, am, mir, msgr, xenl, xon,
3027 cols#80, lines#24, vt#3,
3029 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3030 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3031 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3032 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
3033 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
3034 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
3035 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
3036 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3037 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
3038 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
3039 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
3040 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
3041 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
3042 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
3043 rmso=\E[27m, rmul=\E[24m,
3044 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3045 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3046 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3047 smso=\E[7m, smul=\E[4m,
3049 # A much better description of the VT200/220; used to be vt220-8
3050 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
3051 # designation to accommodate bug in pcvt -TD
3053 # Here's a picture of the VT220 editing keypad:
3054 # +--------+--------+--------+
3055 # | Find | Insert | Remove |
3056 # +--------+--------+--------+
3057 # | Select | Prev | Next |
3058 # +--------+--------+--------+
3059 vt220|vt200|dec vt220,
3060 OTbs, am, mir, msgr, xenl, xon,
3061 cols#80, it#8, lines#24, vt#3,
3062 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3063 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
3064 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3065 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3066 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3067 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3068 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3069 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
3070 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3071 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3072 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
3073 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
3074 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3075 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3076 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3077 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
3078 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3079 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
3080 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
3081 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
3083 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3084 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
3085 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
3087 vt220-w|vt200-w|DEC vt220 in wide mode,
3089 rs3=\E[?3h, use=vt220,
3090 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
3091 OTbs, am, mc5i, mir, msgr, xenl, xon,
3092 cols#80, it#8, lines#24, vt#3,
3093 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3094 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
3095 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
3096 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
3097 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
3098 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
3099 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
3100 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
3101 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
3102 il=\233%p1%dL, il1=\233L, ind=\ED,
3103 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
3104 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
3105 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
3106 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
3107 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
3108 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
3109 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
3110 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
3111 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
3112 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
3113 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
3114 rmul=\23324m, rs1=\233?3l, sc=\E7,
3115 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3116 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
3117 smso=\2337m, smul=\2334m, tbc=\2333g,
3120 # This vt220 description regards F6--F10 as the second block of function keys
3121 # at the top of the keyboard. This mapping follows the description given
3122 # in the VT220 Programmer Reference Manual and agrees with the labeling
3123 # on some terminals that emulate the vt220. There is no support for an F5.
3124 # See vt220 for an alternate mapping.
3126 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
3127 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3128 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3129 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
3130 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
3132 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
3134 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3136 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
3137 # (not an official DEC entry!)
3138 # The problem with real vt220 terminals is they don't send escapes when in
3139 # in vt220 mode. This can be gotten around two ways. 1> don't send
3140 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
3141 # features of vt100 advanced video which it then has.
3143 # This entry takes the view of putting a vt220 into vt100 mode so
3144 # you can use the escape key in emacs and everything else which needs it.
3146 # You probably don't want to use this on a VMS machine since VMS will think
3147 # it has a vt220 and will get fouled up coming out of emacs
3149 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
3150 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
3152 vt200-js|vt220-js|dec vt200 series with jump scroll,
3155 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3156 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3157 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
3158 ht=^I, il1=\E[L, ind=\ED,
3159 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
3160 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3161 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
3162 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
3163 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
3164 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
3165 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
3167 # This was DEC's vt320. Use the purpose-built one below instead
3168 #vt320|DEC VT320 in vt100 emulation mode,
3171 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
3173 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
3175 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
3177 # These entries are not DEC's official ones, they were purpose-built for the
3178 # VT320. Here are the designer's notes:
3179 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
3180 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
3181 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
3182 # Things that use <knxt> usually use tab anyways... and things that don't use
3183 # tab usually use <knxt> instead...
3184 # kprv is same as tab - Backtab is useless...
3185 # I left out <sgr> because of its RIDICULOUS complexity,
3186 # and the resulting fact that it causes the termcap translation of the entry
3187 # to SMASH the 1k-barrier...
3188 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3189 # (vt320: uncommented <fsl> --esr)
3190 vt320|vt300|dec vt320 7 bit terminal,
3191 am, hs, mir, msgr, xenl,
3192 cols#80, lines#24, wsl#80,
3193 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3194 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3195 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3196 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3197 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3198 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3199 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3200 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
3201 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
3202 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3203 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3204 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
3205 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3206 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3207 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3208 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
3209 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
3210 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3211 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3213 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3215 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3216 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3217 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3218 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
3219 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
3221 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3222 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3224 # We have to init 132-col mode, not 80-col mode.
3225 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
3227 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3228 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3230 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
3232 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3233 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
3236 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
3237 # which are pretty much a superset of the VT320. They have the
3238 # host writable status line, yet another different DRCS matrix size,
3239 # and such, but they add the DEC Technical character set, Multiple text
3240 # pages, selectable length pages, and the like. The difference between
3241 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
3242 # monitor, the former has 4 planes and a color monitor. These terminals
3243 # support VT131 and ANSI block mode, but as with much of these things,
3244 # termcap/terminfo doesn't deal with these features.
3246 # Note that this entry is are set up in what was the standard way for GNU
3247 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3248 # keys were switched into application mode at the same time the numeric pad
3249 # is switched into application mode. This changes the definitions of the
3250 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3251 # your termcap or terminfo entry,
3253 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3254 # (vt340: string capability "sb=\E[M" corrected to "sr";
3255 # also, added <rmam>/<smam> based on the init string -- esr)
3256 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
3257 am, eslok, hs, mir, msgr, xenl, xon,
3258 cols#80, it#8, lines#24, vt#3,
3259 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3260 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3261 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
3262 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
3263 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3264 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
3265 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
3266 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3267 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
3269 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3270 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3271 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3272 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3273 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3274 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3275 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3276 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
3277 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3278 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3279 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3280 tsl=\E[2$~\E[1$}\E[1;%dH,
3282 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
3283 # (originally written with vt420 as its primary name, and usable for it).
3285 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
3286 # text pages and long text pages with selectable length of the vt340, along
3287 # with left and right margins, rectangular area text copy, fill, and erase
3288 # operations, selected region character attribute change operations,
3289 # page memory and rectangle checksums, insert/delete column, reception
3290 # macros, and other features too numerous to remember right now. TERMCAP
3291 # can only take advantage of a few of these added features.
3293 # Note that this entry is are set up in what was the standard way for GNU
3294 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
3295 # keys were switched into application mode at the same time the numeric pad
3296 # is switched into application mode. This changes the definitions of the
3297 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
3298 # your termcap entry,
3300 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
3301 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
3302 # also, added <rmam>/<smam> based on the init string -- esr)
3303 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
3304 am, eslok, hs, mir, msgr, xenl, xon,
3305 cols#80, it#8, lines#24, vt#3,
3306 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3307 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3308 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
3309 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3310 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3311 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3312 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3313 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
3314 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
3315 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3316 il=\E[%p1%dL, il1=\E[L, ind=\ED,
3317 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
3318 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3319 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
3320 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
3321 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
3322 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
3323 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
3324 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
3325 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3326 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
3327 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3328 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
3330 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
3331 # a missing <sc> -- esr)
3332 # add msgr and other capabilities from vt220 -TD
3334 am, mir, msgr, xenl, xon,
3335 cols#80, it#8, lines#24, vt#3,
3336 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3337 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
3338 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
3339 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3340 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3341 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
3342 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3343 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
3344 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
3345 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
3346 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
3347 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
3348 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
3349 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
3350 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
3351 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
3352 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
3353 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
3354 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3355 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
3356 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
3357 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
3358 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3359 use=ansi+pp, use=dec+sl, use=ansi+enq,
3361 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
3362 # takes two parameters, the key and the string. Translating the key is
3363 # straightforward (keys 1-5 are not defined on real terminals, though some
3364 # emulators define these):
3366 # if (key < 16) then value = key;
3367 # else if (key < 21) then value = key + 1;
3368 # else if (key < 25) then value = key + 2;
3369 # else if (key < 27) then value = key + 3;
3370 # else if (key < 30) then value = key + 4;
3371 # else value = key + 5;
3373 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
3374 # There's no provision in terminfo for emitting a string in this format, so the
3375 # application has to know it.
3377 vt420pc|DEC VT420 w/PC keyboard,
3378 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
3379 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
3380 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
3381 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
3382 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
3383 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
3384 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
3385 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
3386 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
3387 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
3388 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
3389 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
3390 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3391 kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3392 pctrm=USR_TERM\:vt420pcdos\:,
3393 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
3396 vt420pcdos|DEC VT420 w/PC for DOS Merge,
3398 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
3400 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
3401 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
3403 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
3404 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3405 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3406 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3407 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3408 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3409 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
3414 vt510pc|DEC VT510 w/PC keyboard,
3416 vt510pcdos|DEC VT510 w/PC for DOS Merge,
3421 # The VT520 is a monochrome text terminal capable of managing up to
3422 # four independent sessions in the terminal. It has multiple ANSI
3423 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
3424 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
3425 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
3427 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
3428 # [Alt]/[Print Screen] depending upon which keyboard and which
3429 # terminal mode is being used. If Set-Up has been disabled or
3430 # assigned to an unknown key, Set-Up may be entered by pressing
3431 # [F3] as the first key after power up, regardless of keyboard type.
3433 use=ansi+rca, use=vt420, use=ansi+tabs,
3438 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
3439 # Keyboard, which replaces the old LK41R-AA keyboard.
3441 # In trying to get the function keys to work, I had to cobble my own
3442 # terminfo.src entry, since the existing vt520 entry doesn't include most of
3443 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
3444 # I seem to get them all -Mike Gran
3445 vt520ansi|Boundless VT520 ANSI,
3446 use=ansi+rca, use=vt420f, use=vt220+keypad,
3449 #### VT100 emulations
3452 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
3453 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
3454 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
3455 # that this works best with a stock vt100 entry.
3456 dec-vt100|EWAN telnet's vt100 emulation,
3459 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
3460 dec-vt220|DOS tnvt200 terminal emulator,
3463 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
3464 # anyone who needs PC VT340 emulation. (or anything below that level, for
3465 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
3466 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
3467 # I can send the address if requested.
3468 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
3469 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
3470 z340|zstem vt340 terminal emulator 132col 42line,
3472 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3473 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
3475 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
3477 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3478 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
3481 # CRT is shareware. It implements some xterm features, including mouse.
3482 crt|crt-vt220|CRT 2.3 emulating VT220,
3485 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3487 # PuTTY 0.55 (released 3 August 2004)
3488 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3490 # Comparing with 0.51, vttest is much better (only a few problems with the
3491 # cursor position reports and wrapping).
3493 # PuTTY 0.51 (released 14 December 2000)
3495 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3496 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3497 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3498 # to xterm, which is incorrect, since several features are misimplemented:
3500 # Alt+key always sends ESC+key, so 'km' capability is removed.
3502 # Control responses, wrapping and tabs are buggy, failing a couple of
3503 # screens in vttest.
3505 # xterm mouse support is not implemented (unrelease version may).
3507 # Several features such as backspace/delete are optional; this entry documents
3508 # the default behavior -TD
3510 putty|PuTTY terminal emulator,
3511 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3512 colors#8, it#8, ncv#22, pairs#64, U8#1,
3513 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3514 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3515 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
3516 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3517 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3518 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3519 dch=\E[%p1%dP, dch1=\E[P,
3520 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
3521 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3522 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
3523 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
3524 ind=^J, indn=\E[%p1%dS,
3525 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
3526 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3527 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
3528 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
3529 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3530 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3531 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3532 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3533 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3534 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3535 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
3536 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
3537 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
3538 rmso=\E[27m, rmul=\E[24m,
3539 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3540 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3541 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3542 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3543 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3544 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
3545 tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J, use=vt102+enq,
3547 vt100-putty|Reset PuTTY to pure vt100,
3548 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3550 # palette is hardcoded...
3551 putty-256color|PuTTY 0.58 with xterm 256-colors,
3552 use=xterm+256setaf, use=putty,
3554 # One of the keyboard selections is "VT100+".
3555 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3556 putty-vt100|VT100+ keyboard layout,
3557 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3558 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3559 kf9=\EOX, use=putty,
3561 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3563 # Use modifiers to obtain function keys past 12:
3566 # F25-F36 - control/alt
3567 # F37-F48 - control/shift
3569 putty-sco|putty with SCO function keys,
3570 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3571 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3572 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3573 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3574 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3575 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3576 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3577 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3578 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3579 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3580 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3581 kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty,
3583 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
3584 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
3585 # (communication program) which supports:
3587 # - Serial port connections.
3588 # - TCP/IP (telnet) connections.
3589 # - VT100 emulation, and selected VT200/300 emulation.
3590 # - TEK4010 emulation.
3591 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
3593 # - Scripts using the "Tera Term Language".
3594 # - Japanese and Russian character sets.
3596 # The program does not come with terminfo or termcap entries. However, the
3597 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
3598 # vt52 or doublesize character support; blinking is done with color). Besides
3599 # the HPA, VPA extensions it also implements CPL and CNL.
3601 # All of the function keys can be remapped. This description shows the default
3602 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
3603 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
3604 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
3612 # ANSI colors are implemented, but cannot be combined with video attributes
3613 # except for reverse.
3615 # No fonts are supplied with the program, so the acsc string is chosen to
3616 # correspond with the default Microsoft terminal font.
3618 # Tera Term recognizes some xterm sequences, including those for setting and
3619 # retrieving the window title, and for setting the window size (i.e., using
3620 # "resize -s"), though it does not pass SIGWINCH to the application if the
3621 # user resizes the window with the mouse.
3622 teraterm2.3|Tera Term Pro,
3625 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3626 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
3627 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3628 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3629 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3630 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
3631 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
3632 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3633 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3634 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
3635 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3636 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
3637 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
3638 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
3639 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
3640 use=klone+color, use=vt100,
3642 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
3643 # to choose a Windows OEM font).
3645 # Testing with tack:
3646 # - it does not have xenl (suppress that)
3647 # - underline seems to work with color (modify ncv).
3648 # Testing with vttest:
3649 # - wrapping differs from vt100 (menu 1).
3650 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
3652 # - it recognizes the dtterm window controls for reporting size in
3653 # characters and pixels.
3654 # - it passes SIGWINCH.
3655 teraterm4.59|Tera Term Pro,
3658 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3659 kmous=\E[M, use=teraterm2.3,
3664 # Tested with WinNT 4.0, the telnet application assumes the screensize is
3665 # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
3668 # a) Fails tack's cup (cursor-addressing) test, though cup works well enough
3669 # for casual (occasional) use. Also fails several of the vttest screens,
3670 # but that is not unusual for vt100 "emulators".
3671 # b) Does not implement vt100 keypad
3672 # c) Recognizes a subset of vt52 controls.
3673 ms-vt100|MS telnet imitating dec vt100,
3675 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
3676 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
3677 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
3679 # Tested with Windows 2000, the telnet application runs in a console window,
3680 # also using 'Terminal' font.
3683 # a) This version has no function keys or numeric keypad. Unlike the older
3684 # version, the numeric keypad is entirely ignored.
3685 # b) The program sets $TERM to "ansi", which of course is inaccurate.
3686 ms-vt100-color|vtnt|windows 2000 ansi (sic),
3688 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
3691 # Based on comments from Federico Bianchi:
3693 # vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
3694 # scheme for PF keys.
3696 # and PuTTY wishlist:
3698 # The modifiers are represented as the codes listed above, prefixed to
3699 # the normal sequences. If the modifier is pressed alone, its sequence
3700 # is transmitted twice in succession. If multiple modifiers apply,
3701 # they're transmitted in the order shift, control, alt.
3706 ms-vt100+|vt100+|windows XP vt100+ (sic),
3707 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
3708 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
3709 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
3710 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
3711 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
3712 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
3713 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
3714 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
3715 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
3716 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
3717 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
3718 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
3719 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
3720 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
3721 knp=\E/, kpp=\E?, use=ms-vt100-color,
3723 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
3726 # expect-5.44.1.15/example/tkterm
3727 # a minimal subset of a vt100 (compare with "news-unk).
3729 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
3730 tt|tkterm|Don Libes' tk text widget terminal emulator,
3731 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3732 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
3733 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3734 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
3737 ######## X TERMINAL EMULATORS
3740 # You can add the following line to your .Xdefaults to change the terminal type
3741 # set by the xterms you start up to my-xterm:
3743 # *termName: my-xterm
3745 # System administrators can change the default entry for xterm instances
3746 # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
3747 # case, xterm will detect and reject an invalid terminal type, falling back
3748 # to the default of xterm.
3751 # X10/6.6 11/7/86, minus alternate screen, plus (csr)
3752 # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
3753 # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
3754 # as these seem not to work -- esr)
3755 x10term|vs100-x10|xterm terminal emulator (X10 window system),
3756 OTbs, am, km, mir, msgr, xenl, xon,
3757 cols#80, it#8, lines#65,
3758 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
3759 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3760 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
3761 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
3762 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
3763 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3764 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
3765 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3766 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
3767 smso=\E[7m, smul=\E[4m,
3768 # Compatible with the R5 xterm
3769 # (from the XFree86 3.2 distribution, <blink=@> removed)
3770 # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
3771 # corrected typos in rs2 string - TD
3773 xterm-r5|xterm R5 version,
3774 OTbs, am, km, msgr, xenl,
3775 cols#80, it#8, lines#24,
3776 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3777 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3778 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3779 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3780 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3781 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
3782 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
3783 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
3784 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
3785 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
3786 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
3787 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
3788 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
3789 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
3791 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
3793 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
3794 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
3795 smul=\E[4m, tbc=\E[3g, use=vt100+enq,
3796 # Compatible with the R6 xterm
3797 # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
3798 # added khome/kend, hts based on the R6 xterm code - TD
3799 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
3800 # for compatibility with other emulators).
3801 xterm-r6|xterm X11R6 version,
3802 OTbs, am, km, mir, msgr, xenl,
3803 cols#80, it#8, lines#24,
3804 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3805 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
3806 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3807 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3808 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3809 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3810 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
3812 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
3813 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3814 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3815 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3816 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3817 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3818 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3819 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
3820 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
3821 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3822 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3823 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
3824 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
3825 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
3827 xterm-old|antique xterm version,
3829 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
3830 # The name has been changed and some aliases have been removed.
3831 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
3832 OTbs, am, bce, km, mir, msgr, xenl, XT,
3833 cols#80, it#8, lines#24, ncv@,
3834 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3835 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3836 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3837 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3838 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3839 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3840 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3841 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3842 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3843 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3845 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
3846 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
3847 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
3848 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3849 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3850 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
3851 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3852 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
3853 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
3854 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3855 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3856 rmso=\E[27m, rmul=\E[24m, rs1=^O,
3857 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
3858 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3859 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
3860 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3861 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3862 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3863 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
3864 use=ecma+color, use=vt220+keypad,
3866 # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
3867 # codes for F1-F4 except while in VT220 mode.
3868 xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
3869 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
3871 # This version was released in XFree86 3.3.3 (November 1998).
3872 # Besides providing printer support, it exploits a new feature that allows
3873 # xterm to use terminfo-based descriptions with the titeInhibit resource.
3874 # -- the distribution contained incorrect khome/kend values -TD
3875 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
3876 blink=\E[5m, ich1@, invis=\E[8m,
3877 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
3878 rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
3879 rs2=\E[!p\E[?3;4l\E[4l\E>,
3880 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3881 smcup=\E[?1048h\E[?1047h, use=ansi+pp,
3884 # This version was released in XFree86 4.0.
3885 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
3887 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
3888 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
3889 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
3890 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
3891 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
3892 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
3893 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
3894 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
3895 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
3896 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
3897 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
3898 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
3899 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
3900 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
3901 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
3902 smcup=\E[?1049h, use=xterm-xf86-v333,
3904 # This version was released in XFree86 4.3.
3905 xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
3906 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
3907 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
3909 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3912 # This version was released in XFree86 4.4.
3913 xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
3914 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
3915 rin=\E[%p1%dT, use=xterm-xf86-v43,
3917 xterm-xfree86|xterm terminal emulator (XFree86),
3920 # This version reflects the current xterm features.
3921 xterm-new|modern xterm terminal emulator,
3923 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
3924 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
3927 # This fragment is for people who cannot agree on what the backspace key
3929 xterm+kbs|fragment for backspace key,
3932 # This fragment describes as much of XFree86 xterm's "pc-style" function
3933 # keys as will fit into terminfo's 60 function keys.
3936 # ---------------------------------
3943 # 8 Shift + Alt + Control
3944 # ---------------------------------
3945 # The meta key may also be used as a modifier in this scheme, adding another
3946 # bit to the parameter.
3947 xterm+pcfkeys|fragment for PC-style fkeys,
3948 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
3951 xterm+noapp|fragment with cursor keys in normal mode,
3952 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
3955 xterm+app|fragment with cursor keys in application mode,
3956 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
3959 # The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
3960 # and revised in patch #167 (2002/8/24). Some other terminal emulators copied
3961 # the earlier scheme, as noted in the "use=" clauses in this file.
3963 # The original assignments from patch #94 for cursor-keys had some technical
3966 # A parameter for a function-key to represent a modifier is just more
3967 # bits. But for a cursor-key it may change the behavior of the
3968 # application. For instance, emacs decodes the first parameter of a
3969 # cursor-key as a repeat count.
3971 # A parameterized string should (really) not begin with SS3 (\EO).
3972 # Rather, CSI (\E[) should be used.
3974 # For these reasons, the original assignments were deprecated. For
3975 # compatibility reasons, they are still available as a setting of xterm's
3976 # modifyCursorKeys resource. These fragments list the modified cursor-keys
3977 # that might apply to xterm+pcfkeys with different values of that resource.
3978 xterm+pcc3|fragment with modifyCursorKeys:3,
3979 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
3980 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
3981 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
3982 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
3983 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
3984 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
3985 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
3986 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
3989 xterm+pcc2|fragment with modifyCursorKeys:2,
3990 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
3991 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
3992 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
3993 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
3994 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
3995 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
3996 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
3998 xterm+pcc1|fragment with modifyCursorKeys:1,
3999 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
4000 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
4001 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
4002 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
4003 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
4004 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
4006 xterm+pcc0|fragment with modifyCursorKeys:0,
4007 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
4008 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
4009 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
4010 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
4011 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
4012 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
4015 # Here are corresponding fragments from xterm patch #216:
4017 xterm+pcf0|fragment with modifyFunctionKeys:0,
4018 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4019 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
4020 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4021 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4022 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
4023 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
4024 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4025 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4026 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
4027 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
4028 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4029 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
4030 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
4031 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
4032 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
4033 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
4034 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
4036 xterm+pcf2|fragment with modifyFunctionKeys:2,
4037 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
4038 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
4039 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
4040 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
4041 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
4042 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
4043 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
4044 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
4045 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
4046 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
4047 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
4048 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
4049 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
4050 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
4051 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
4052 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
4053 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
4054 kf8=\E[19~, kf9=\E[20~,
4056 # Chunks from xterm #230:
4057 xterm+pce2|fragment with modifyCursorKeys:2,
4058 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
4059 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
4060 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
4061 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
4062 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
4063 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
4064 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
4065 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
4066 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
4067 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
4068 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
4071 xterm+edit|fragment for 6-key editing-keypad,
4072 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
4075 xterm+pc+edit|fragment for pc-style editing keypad,
4076 kend=\E[4~, khome=\E[1~,
4078 xterm+vt+edit|fragment for vt220-style editing keypad,
4079 kfnd=\E[1~, kslt=\E[4~,
4082 # Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
4083 # Alternatively, the same scheme with old-style function keys as in xterm-r6
4084 # is shown here (because that is used in mrxvt and mlterm):
4085 xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
4086 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
4087 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
4088 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
4089 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
4090 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
4091 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
4092 kf63=\E[13;4~, use=xterm+pcf2,
4094 # This chunk is used for building the VT220/Sun/PC keyboard variants.
4095 xterm-basic|modern xterm terminal emulator - common,
4096 OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
4097 colors#8, cols#80, it#8, lines#24, pairs#64,
4098 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4099 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
4100 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
4101 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
4102 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
4103 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
4104 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
4105 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
4106 el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
4107 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
4108 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
4109 is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
4110 memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
4111 ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
4112 rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m,
4113 rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
4114 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
4115 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4116 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
4117 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
4118 sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
4119 smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
4120 smm=\E[?1034h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
4121 vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+pp, use=xterm+kbs,
4124 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
4125 # In retrospect, something like xterm-r6 was intended here -TD
4126 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
4127 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
4129 # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
4130 # If configured to support 88- or 256-colors (which is fairly common in 2009),
4131 # xterm also recognizes the control sequences for initc -TD
4132 xterm-16color|xterm with 16 colors like aixterm,
projects / ncurses.git / blob