1 ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
3 # This version of terminfo.src is distributed with ncurses and is maintained
4 # by Thomas E. Dickey (TD).
6 # Report bugs and new terminal descriptions to
10 # $Date: 2020/01/19 01:09:38 $
12 # The original header is preserved below for reference. It is noted that there
13 # is a "newer" version which differs in some cosmetic details (but actually
14 # stopped updates several years ago); we have decided to not change the header
15 # unless there is also a change in content.
17 # To further muddy the waters, it is noted that changes to this file as part of
18 # maintenance of ncurses (since 1996) are generally conceded to be copyright
19 # under the ncurses MIT-style license. That was the effect of the agreement
20 # which the principal authors of ncurses made in 1998. However, since much of
21 # the file itself is of unknown authorship (and the disclaimer below makes it
22 # obvious that Raymond cannot or will not convey rights over those parts),
23 # there is no explicit copyright notice on the file itself.
25 # It would also be a nuisance to split the file into unknown/known authorship
26 # and move pieces as they are maintained, since many of the maintenance changes
27 # have been small corrections to Raymond's translations to/from termcap format,
28 # correcting the data but not the accompanying annotations.
30 # In any case, note that almost half of this file is not data but annotations
31 # which reflect creative effort. Furthermore, the structure of entries to
32 # reuse common chunks also is creative (and subject to copyright). Finally,
33 # some portions of the data are derivative work under a compatible MIT-style
36 #------------------------------------------------------------------------------
37 # https://invisible-island.net/ncurses/ncurses.faq.html#terminfo_copying
38 # https://invisible-island.net/personal/copyrights.html#removing_notes
39 #------------------------------------------------------------------------------
44 # Eric S. Raymond (current maintainer)
45 # John Kunze, Berkeley
46 # Craig Leres, Berkeley
48 # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
49 # address is no longer valid. The latest version can always be found at
50 # <http://www.tuxedo.org/terminfo>.
52 # PURPOSE OF THIS FILE:
54 # This file describes the capabilities of various character-cell terminals,
55 # as needed by software such as screen-oriented editors.
57 # Other terminfo and termcap files exist, supported by various OS vendors
58 # or as relics of various older versions of UNIX. This one is the longest
59 # and most comprehensive one in existence. It subsumes not only the entirety
60 # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
61 # termcap file, but also large numbers of vendor-maintained termcap and
62 # terminfo entries more complete and carefully tested than those in historical
63 # termcap/terminfo versions.
65 # Pointers to related resources (including the ncurses distribution) may
66 # be found at <http://www.tuxedo.org/terminfo>.
68 # INTERNATIONALIZATION:
70 # This file uses only the US-ASCII character set (no ISO8859 characters).
72 # This file assumes a US-ASCII character set. If you need to fix this, start
73 # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
74 # for your character set. \E(A and \E)A enables the British character set
75 # with the pound sign at position 2/3.
77 # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
78 # C1 characters are considered the first-byte set of the Japanese encodings,
79 # so \E)0 should be avoided in <enacs> and initialization strings.
83 # The version you are looking at may be in any of three formats: master
84 # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
85 # which by the format given in the header above.
87 # The master format is accepted and generated by the terminfo tools in the
88 # ncurses suite; it differs from stock (System V-compatible) terminfo only
89 # in that it admits a group of capabilities (prefixed `OT') equivalent to
90 # various obsolete termcap capabilities. You can, thus, convert from master
91 # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
92 # you have ncurses `tic -I' is nicer (among other things, it automatically
93 # outputs entries in a canonical form).
95 # The termcap version is generated automatically from the master version
96 # using tic -C. This filtering leaves in the OT capabilities under their
97 # original termcap names. All translated entries fit within the 1023-byte
98 # string-table limit of archaic termcap libraries except where explicitly
99 # noted below. Note that the termcap translation assumes that your termcap
100 # library can handle multiple tc capabilities in an entry. 4.4BSD has this
101 # capability. Older versions of GNU termcap, through 1.3, do not.
103 # For details on these formats, see terminfo(5) in the ncurses distribution,
104 # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
105 # curses has been declared obsolete by the caretakers of the 4.4BSD sources
106 # as of June 1995; they are encouraging everyone to migrate to ncurses.
108 # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
109 # no entry in this file has embedded comments. This is so source translation
110 # to termcap only has to carry over leading comments. Also, no name field
111 # contains embedded whitespace (such whitespace confuses rdist).
113 # Further note: older versions of this file were often installed with an editor
114 # script (reorder) that moved the most common terminal types to the front of
115 # the file. This should no longer be necessary, as the file is now ordered
116 # roughly by type frequency with ANSI/VT100 and other common types up front.
118 # Some information has been merged in from terminfo files distributed by
119 # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
120 # comes from vendors who maintain official terminfos for their hardware
121 # (notably DEC and Wyse).
123 # A detailed change history is included at the end of this file.
127 # Comments in this file begin with # - they cannot appear in the middle
128 # of a terminfo/termcap entry (this feature had to be sacrificed in order
129 # to allow standard terminfo and termcap syntax to be generated cleanly from
130 # the master format). Individual capabilities are commented out by
131 # placing a period between the colon and the capability name.
133 # The file is divided up into major sections (headed by lines beginning with
134 # the string "########") and minor sections (beginning with "####"); do
136 # grep "^####" <file> | more
138 # to see a listing of section headings. The intent of the divisions is
139 # (a) to make it easier to find things, and (b) to order the database so
140 # that important and frequently-encountered terminal types are near the
141 # front (so that you'll get reasonable search efficiency from a linear
142 # search of the termcap form even if you don't use reorder). Minor sections
143 # usually correspond to manufacturers or standard terminal classes.
144 # Parenthesized words following manufacturer names are type prefixes or
145 # product line names used by that manufacturers.
147 # HOW TO READ THE ENTRIES:
149 # The first name in an entry is the canonical name for the model or
150 # type, last entry is a verbose description. Others are mnemonic synonyms for
153 # Terminal names look like <manufacturer> <model> - <modes/options>
154 # The part to the left of the dash, if a dash is present, describes the
155 # particular hardware of the terminal. The part to the right may be used
156 # for flags indicating special ROMs, extra memory, particular terminal modes,
157 # or user preferences.
159 # All names should be in lower case, for consistency in typing.
161 # The following are conventionally used suffixes:
162 # -2p Has two pages of memory. Likewise 4p, 8p, etc.
163 # -am Enable auto-margin.
164 # -m Monochrome. Suppress color support
165 # -mc Magic-cookie. Some terminals (notably older Wyses) can
166 # only support one attribute without magic-cookie lossage.
167 # Their base entry is usually paired with another that
168 # uses magic cookies to support multiple attributes.
169 # -nam No auto-margin - suppress <am> capability
170 # -nl No labels - suppress soft labels
171 # -ns No status line - suppress status line
172 # -rv Terminal in reverse video mode (black on white)
173 # -s Enable status line.
174 # -vb Use visible bell (<flash>) rather than <bel>.
175 # -w Wide - in 132 column mode.
176 # If a name has multiple suffixes and one is a line height, that one should
177 # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
179 # Entries with embedded plus signs are designed to be included through use/tc
180 # capabilities, not used as standalone entries.
182 # To avoid search clashes, some older all-numeric names for terminals have
183 # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
184 # All primary names of terminals now have alphanumeric prefixes.
186 # Comments marked "esr" are mostly results of applying the termcap-compiler
187 # code packaged with ncurses and contemplating the resulting error messages.
188 # In many cases, these indicated obvious fixes to syntax garbled by the
189 # composers. In a few cases, I was able to deduce corrected forms for garbled
190 # capabilities by looking at context. All the information in the original
191 # entries is preserved in the comments.
193 # In the comments, terminfo capability names are bracketed with <> (angle
194 # brackets). Termcap capability names are bracketed with :: (colons).
196 # INTERPRETATION OF USER CAPABILITIES
198 # The System V Release 4 and XPG4 terminfo format defines ten string
199 # capabilities for use by applications, <u0>...<u9>. In this file, we use
200 # certain of these capabilities to describe functions which are not covered
201 # by terminfo. The mapping is as follows:
203 # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
204 # u8 terminal answerback description
205 # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
206 # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
208 # The terminal enquire string <u9> should elicit an answerback response
209 # from the terminal. Common values for <u9> will be ^E (on older ASCII
210 # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
212 # The cursor position request (<u7>) string should elicit a cursor position
213 # report. A typical value (for VT100 terminals) is \E[6n.
215 # The terminal answerback description (u8) must consist of an expected
216 # answerback string. The string may contain the following scanf(3)-like
219 # %c Accept any character
220 # %[...] Accept any number of characters in the given set
222 # The cursor position report (<u6>) string must contain two scanf(3)-style
223 # %d format elements. The first of these must correspond to the Y coordinate
224 # and the second to the %d. If the string contains the sequence %i, it is
225 # taken as an instruction to decrement each value after reading it (this is
226 # the inverse sense from the cup string). The typical CPR value is
227 # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
229 # These capabilities are used by tack(1m), the terminfo action checker
230 # (distributed with ncurses 5.0).
234 # All the entries in this file have been edited to assume that the tabset
235 # files directory is /usr/share/tabset, in conformance with the File Hierarchy
236 # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
237 # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
239 # No curses package we know of actually uses these files. If their location
240 # is an issue, you will have to hand-patch the file locations before compiling
243 # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
245 # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
246 # character-cell terminals are increasingly replaced by X displays, much of
247 # this file is becoming a historical document (this is part of the reason for
248 # the new organization, which puts ANSI types, xterm, Unix consoles,
249 # and vt100 up front in confidence that this will catch 95% of new hardware).
251 # For the terminal types still alive, I'd like to have manufacturer's
252 # contact data (Internet address and/or snail-mail + phone).
254 # I'm also interested in enriching the comments so that the latter portions of
255 # the file do in fact become a potted history of VDT technology as seen by
256 # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
257 # include its live/dead/out-of-the-business status, and for as many
258 # terminal types as possible to be tagged with information like years
259 # of heaviest use, popularity, and interesting features.
261 # I'm especially interested in identifying the obscure entries listed under
262 # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
263 # wisdom about them gets lost. If you know a lot about obscure old terminals,
264 # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
265 # eyeball it for things you can identify and describe.
267 # If you have been around long enough to contribute, please read the file
268 # with this in mind and send me your annotations.
270 # COPYRIGHTS AND OTHER DELUSIONS
272 # The BSD ancestor of this file had a standard Regents of the University of
273 # California copyright with dates from 1980 to 1993.
275 # Some information has been merged in from a terminfo file SCO distributes.
276 # It has an obnoxious boilerplate copyright which I'm ignoring because they
277 # took so much of the content from the ancestral BSD versions of this file
278 # and didn't attribute it, thereby violating the BSD Regents' copyright.
280 # Not that anyone should care. However many valid functions copyrights may
281 # serve, putting one on a termcap/terminfo file with hundreds of anonymous
282 # contributors makes about as much sense as copyrighting a wall-full of
283 # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
285 # This file deliberately has no copyright. It belongs to no one and everyone.
286 # If you claim you own it, you will merely succeed in looking like a fool.
287 # Use it as you like. Use it at your own risk. Copy and redistribute freely.
288 # There are no guarantees anywhere. Svaha!
291 ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
293 # This section describes terminal classes and brands that are still
299 # Special "terminals". These are used to label tty lines when you don't
300 # know what kind of terminal is on it. The characteristics of an unknown
301 # terminal are the lowest common denominator - they look about like a ti 700.
304 dumb|80-column dumb tty,
307 bel=^G, cr=\r, cud1=\n, ind=\n,
308 unknown|unknown terminal type,
310 lpr|printer|line printer,
313 bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
314 glasstty|classic glass tty interpreting ASCII control characters,
317 bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
318 kcud1=\n, nel=\r\n, .kbs=^H,
322 bel=^G, cr=\r, cud1=\n, ind=\n,
324 # This is almost the same as "dumb", but with no prespecified width.
325 # DEL and ^C are hardcoded to act as kill characters.
326 # ^D acts as a line break (just like newline).
329 # for compatibility with xterm -TD
330 9term|Plan9 terminal emulator for X,
332 OTnl=\n, bel=^G, cud1=\n,
334 #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
336 # See the end-of-file comment for more on these.
339 # ANSI capabilities are broken up into pieces, so that a terminal
340 # implementing some ANSI subset can use many of them.
341 ansi+local1|ANSI normal-mode cursor-keys,
342 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
343 ansi+local|ANSI normal-mode parameterized cursor-keys,
344 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
345 cuu=\E[%p1%dA, use=ansi+local1,
346 ansi+tabs|ANSI tab-stops,
347 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
348 ansi+inittabs|ANSI initial tab-stops,
350 ansi+erase|ANSI clear screen/line,
351 clear=\E[H\E[J, ed=\E[J, el=\E[K,
352 ansi+rca|ANSI relative cursor-addressing,
353 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
354 ansi+cup|ANSI absolute cursor-addressing,
355 cup=\E[%i%p1%d;%p2%dH, home=\E[H,
356 ansi+rep|ANSI repeat-character,
357 rep=%p1%c\E[%p2%{1}%-%db,
358 ansi+idl1|ANSI insert/delete one line,
360 ansi+idl|ANSI insert/delete lines,
361 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
362 ansi+idc1|ANSI insert/delete one character,
363 dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
364 ansi+idc|ANSI insert/delete characters,
365 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
366 ansi+arrows|ANSI normal-mode cursor-keys,
367 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
369 ansi+sgr|ANSI graphic renditions,
370 blink=\E[5m, invis=\E[8m, rev=\E[7m,
371 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
373 ansi+sgrso|ANSI standout only,
374 rmso=\E[m, smso=\E[7m,
375 ansi+sgrul|ANSI underline only,
376 rmul=\E[m, smul=\E[4m,
377 ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
379 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
381 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
382 ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
384 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
386 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
388 # ECMA-48 does not specify scroll-regions, but most people consider it to be
389 # "ANSI" because it is widely-supported. See ecma+index for the standard form.
390 ansi+csr|ANSI scroll-region plus cursor save & restore,
391 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
393 # The normal (ANSI) flavor of "media copy" building block asserts that
394 # characters sent to the printer do not echo on the screen. DEC terminals
395 # can also be put into autoprinter mode, where each line is sent to the
396 # printer as you move off that line, e.g., by a carriage return.
397 ansi+pp|ANSI printer port,
399 mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
400 dec+pp|DEC autoprinter mode,
401 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
403 # The IBM PC alternate character set. Plug this into any Intel console entry.
404 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
405 # ROM graphics for control characters such as the diamond, up- and down-arrow.
406 # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
407 # will work with any Intel console, they all seem to have inherited \E[11m
408 # from the ANSI.SYS de-facto standard.
409 klone+acs|alternate character set for ansi.sys displays,
410 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
411 \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
412 \301w\302x\263y\363z\362{\343|\330}\234~\376,
413 rmacs=\E[10m, smacs=\E[11m,
415 # Highlight controls corresponding to the ANSI.SYS standard. Most
416 # console drivers for Intel boxes obey these. Makes the same assumption
417 # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
418 # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
419 klone+sgr|attribute control for ansi.sys displays,
420 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
421 rmso=\E[m, rmul=\E[m,
422 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
424 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
427 # Most Intel boxes do not treat "invis" (invisible) text.
428 klone+sgr8|attribute control for ansi.sys displays,
430 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
431 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
434 # Highlight controls corresponding to the ANSI.SYS standard. *All*
435 # console drivers for Intel boxes obey these. Does not assume \E[11m will
436 # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
437 # diamond and arrow characters under curses.
438 klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
439 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
441 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
442 %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
443 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
446 # KOI8-R (RFC1489) acs (alternate character set)
447 # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
448 klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
449 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
450 \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
451 \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
453 rmacs=\E[10m, smacs=\E[11m,
455 # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
456 # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
457 # but equivalent strings that don't rely on that coincidence:
458 # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
459 # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
460 # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
461 # They match a subset of ECMA-48.
462 klone+color|color control for ansi.sys and ISO6429-compatible displays,
463 colors#8, ncv#3, pairs#64,
464 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
466 # This is better than klone+color, it doesn't assume white-on-black as the
467 # default color pair, but many `ANSI' terminals don't grok the <op> cap.
468 ecma+color|color control for ECMA-48-compatible terminals,
470 colors#8, ncv#3, pairs#64,
471 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
473 ecma+italics|ECMA-48 italics,
474 ritm=\E[23m, sitm=\E[3m,
476 # Attribute control for ECMA-48-compatible terminals
477 ecma+sgr|attribute capabilities for true ECMA-48 terminals,
478 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
480 ecma+strikeout|ECMA-48 strikeout/crossed-out,
481 rmxx=\E[29m, smxx=\E[9m,
483 # ECMA-48 does not include the VT100 indexing and scroll-margins. It has its
485 ecma+index|ECMA-48 scroll up/down,
486 indn=\E[%p1%dS, rin=\E[%p1%dT,
488 # For comparison, here are all the capabilities implied by the Intel
489 # Binary Compatibility Standard (level 2) that fit within terminfo.
490 # For more detail on this rather pathetic standard, see the comments
491 # near the end of this file.
492 ibcs2|Intel Binary Compatibility Standard prescriptions,
493 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
494 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
495 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
496 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
497 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
498 il=\E[%p1%dL, rc=\E7, rmam=\E[?7l, sc=\E7, smam=\E[?7h,
499 tbc=\E[g, vpa=\E[%i%p1%dd, use=ecma+index,
501 #### ANSI/ECMA-48 terminals and terminal emulators
503 # See near the end of this file for details on ANSI conformance.
504 # Don't mess with these entries! Lots of other entries depend on them!
506 # This section lists entries in a least-capable to most-capable order.
507 # if you're in doubt about what `ANSI' matches yours, try them in that
508 # order and back off from the first that breaks.
510 # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
511 # and more than one page of memory. It uses local motions instead of
512 # direct cursor addressing, and makes almost no assumptions. It does
513 # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
514 ansi-mr|mem rel cup ansi,
516 cols#80, lines#24, use=vanilla, use=ansi+erase,
519 # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
520 # beware of screen size problems and memory relative cursor addressing.
521 ansi-mini|any ansi terminal with pessimistic assumptions,
523 cols#80, lines#24, use=vanilla, use=ansi+cup,
526 # ansi-mtabs adds relative addressing and minimal tab support
527 ansi-mtabs|any ansi terminal with pessimistic assumptions,
529 ht=^I, use=ansi-mini, use=ansi+local1,
531 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
533 # The following is an entry for the full ANSI 3.64 (1977). It lacks
534 # padding, but most terminals using the standard are "fast" enough
535 # not to require any -- even at 9600 bps. If you encounter problems,
536 # try including the padding specifications.
538 # Note: the :as: and :ae: specifications are not implemented here, for
539 # the available termcap documentation does not make clear WHICH alternate
540 # character set to specify. ANSI 3.64 seems to make allowances for several.
541 # Please make the appropriate adjustments to fit your needs -- that is
542 # if you will be using alternate character sets.
544 # There are very few terminals running the full ANSI 3.64 standard,
545 # so I could only test this entry on one verified terminal (Visual 102).
546 # I would appreciate the results on other terminals sent to me.
548 # Please report comments, changes, and problems to:
550 # U.S. MAIL: Hugh Hansard
553 # Atlanta, GA. 30322.
555 # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
557 # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
558 ansi77|ANSI 3.64 standard 1977 version,
560 cols#80, it#8, lines#24,
561 bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
562 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
563 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
564 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
565 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
566 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
567 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
568 smso=\E[7m, smul=\E[4m,
570 # Procomm and some other ANSI emulations don't recognize all of the ANSI-
571 # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
572 # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
573 # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
574 # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
575 # to confuse many emulators. On the other hand, we can count on these programs
576 # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
577 # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
578 # ANSI.SYS influence.
579 # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
580 pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
582 cols#80, it#8, lines#24,
583 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
584 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
585 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
586 hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
587 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
589 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
590 lines#25, use=pcansi-m,
591 pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
592 lines#33, use=pcansi-m,
593 pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
594 lines#43, use=pcansi-m,
595 # The color versions. All PC emulators do color...
596 pcansi|ibm-pc terminal programs claiming to be ansi,
597 use=klone+color, use=pcansi-m,
598 pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
599 lines#25, use=pcansi,
600 pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
601 lines#33, use=pcansi,
602 pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
603 lines#43, use=pcansi,
605 # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
606 # If you want pound signs rather than dollars, replace `B' with `A'
607 # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
608 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
609 ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
611 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
612 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
613 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
614 ich=\E[%p1%d@, il=\E[%p1%dL, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
615 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kich1=\E[L, mc4=\E[4i,
616 mc5=\E[5i, nel=\r\E[S, rep=%p1%c\E[%p2%{1}%-%db,
617 s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
618 vpa=\E[%i%p1%dd, use=ecma+index, use=pcansi-m,
620 ansi+enq|ncurses extension for ANSI ENQ,
621 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
624 # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
625 # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
626 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
627 ansi|ansi/pc-term compatible with color,
628 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
630 # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
631 # all the normal ANSI stuff with no extensions. It assumes
632 # insert/delete line/char is there, so it won't work with
633 # vt100 clones. It assumes video attributes for bold, blink,
634 # underline, and reverse, which won't matter much if the terminal
635 # can't do some of those. Padding is assumed to be zero, which
636 # shouldn't hurt since xon/xoff is assumed.
637 ansi-generic|ansiterm|generic ansi standard terminal,
639 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
640 use=ansi+rca, use=ansi+erase, use=ansi+tabs,
641 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
642 use=ansi+sgrbold, use=ansi+arrows,
644 #### DOS ANSI.SYS variants
646 # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
647 # documentation (except for the keyboard key reassignment feature, which
648 # doesn't fit the <pfkey> model well). The klone+acs sequences were valid
649 # though undocumented. The <pfkey> capability is untested but should work for
650 # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
651 # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
652 ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
653 OTbs, am, mir, msgr, xon,
655 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
656 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
657 is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
658 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
659 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
660 u7=\E[6n, use=klone+color, use=klone+sgr8,
662 # Keypad: Home=\0G Up=\0H PrPag=\0I
663 # ka1,kh kcuu1 kpp,ka3
665 # Left=\0K 5=\0L Right=\0M
668 # End=\0O Down=\0P NxPag=\0Q
669 # kc1,kend kcud1 kc3,knp
674 # On keyboard with 12 function keys,
675 # shifted f-keys: F13-F24
676 # control f-keys: F25-F36
677 # alt f-keys: F37-F48
678 # The shift/control/alt keys do not modify each other, but alt overrides both,
679 # and control overrides shift.
681 # <pfkey> capability for F1-F48 -TD
682 ansi.sys|ANSI.SYS 3.1 and later versions,
683 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
684 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
685 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
686 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
687 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
688 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
689 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
690 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
691 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
692 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
693 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
694 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
695 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
696 %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
697 %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
701 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
702 # This should only be used when the terminal emulator cannot redefine the keys.
703 # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
704 # definitions must be restored. If the terminal emulator is quit while in vi
705 # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
706 # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
707 # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
708 # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
709 # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
710 # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
711 # Consequently the End keypad key could not be set (it is relatively safe and
712 # actually useful because it sends ^@ O, which beeps and opens a line above).
713 ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
714 is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
715 \svi\s9-29-86\n\E[;75;8p,
716 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
717 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
718 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
719 \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
722 # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
723 nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
724 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
725 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
728 # See ansi.sysk and nansi.sys above.
729 nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
730 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
731 is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
732 \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
735 #### Atari ST terminals
737 # From Guido Flohr <gufl0000@stud.uni-sb.de>.
739 tw52|tw52-color|Toswin window manager with color,
741 colors#16, pairs#0x100,
742 oc=\Eb?\Ec0, op=\Eb?\Ec0,
743 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
745 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
747 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
749 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
752 tw52-m|Toswin window manager monochrome,
755 bold=\Eya, dch1=\Ea, dim=\EyB,
756 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
757 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
758 smso=\EyQ, smul=\EyH, use=at-m,
759 tt52|Atari TT medium and high resolution,
760 lines#30, use=at-color,
761 st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
763 colors#16, pairs#0x100,
764 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
765 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
766 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
767 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
768 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
770 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
771 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
772 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
773 %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
775 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
776 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
777 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
778 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
780 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
781 %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
782 %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
783 %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
786 st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
788 cols#80, it#8, lines#24,
789 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
790 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
791 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
792 il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
793 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
794 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
795 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
796 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
797 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
798 kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
799 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
800 tw100|toswin vt100 window mgr,
802 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
803 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
805 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
806 clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
807 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
808 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
809 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
810 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
811 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
812 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
813 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
814 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
815 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
816 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
817 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
818 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
819 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
820 rmso=\E[m, rmul=\E[m,
821 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
823 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
824 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
826 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
827 %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
829 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
830 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
831 # The entries for stv52 and stv52pc probably need a revision.
832 stv52|MiNT virtual console,
834 cols#80, it#8, lines#30,
835 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
836 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
837 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
838 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
839 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
840 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
841 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
842 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
843 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
844 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
845 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
846 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
847 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
848 stv52pc|MiNT virtual console with PC charset,
850 cols#80, it#8, lines#30,
851 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
852 \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
853 \363z\362{\343|\366}\234~\371,
854 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
855 cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
856 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
857 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
858 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
859 kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
860 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
861 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
862 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
863 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
864 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
865 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
868 # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
871 cols#80, it#8, lines#25,
872 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
873 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
874 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
875 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
876 # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
877 # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
878 uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
880 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
881 # MiNT VT52 emulation. 80 columns, 25 rows.
882 # MiNT is Now TOS, the operating system which comes with all Ataris now
883 # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
884 # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
885 # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
886 st52-old|Atari ST with VT52 emulation,
889 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
890 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
891 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
892 ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
893 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
894 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
895 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
896 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
897 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
902 # BeOS entry for Terminal program Seems to be almost ANSI
903 beterm|BeOS Terminal,
904 am, eo, mir, msgr, xenl, xon,
905 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
906 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
907 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
908 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
909 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
910 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
911 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
912 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
913 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
914 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
915 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
916 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
917 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
918 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
919 nel=\r\n, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
920 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
921 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
922 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
923 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
924 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
930 # This entry is good for the 1.2.13 or later version of the Linux console.
932 # ***************************************************************************
935 # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
936 # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
937 # * character. Here are the keymap replacement lines that will set this up: *
939 # keycode 15 = Tab Tab
940 # alt keycode 15 = Meta_Tab
941 # shift keycode 15 = F26
942 # string F26 ="\033[Z"
944 # * This has to use a key slot which is unfortunate (any unused one will *
945 # * do, F26 is the higher-numbered one). The change ought to be built *
946 # * into the kernel tables. *
948 # ***************************************************************************
950 # All linux kernels since 1.2.13 (at least) set the screen size
951 # themselves; this entry assumes that capability.
953 linux-basic|linux console,
954 am, bce, eo, mir, msgr, xenl, xon,
956 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
957 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
958 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
959 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
960 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
961 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
962 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
963 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
964 el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
965 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
966 il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
967 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
968 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
969 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
970 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
971 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
972 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
973 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
974 kspd=^Z, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
975 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
976 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
977 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
978 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
979 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
982 linux-m|Linux console no color,
984 setab@, setaf@, setb@, setf@, use=linux,
986 # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
987 # and it matters, turn off <ccc>. The %02x escape used to implement this is
988 # not supposedly back-portable to older SV curses (although it has worked fine
989 # on Solaris for several years) and not supported in ncurses versions before
991 linux-c-nc|linux console with color-change,
993 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
994 %02x%p4%{255}%*%{1000}%/%02x,
995 oc=\E]R, use=linux-basic,
996 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
997 linux-c|linux console 1.3.6+ for older ncurses,
999 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
1000 %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1001 %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
1002 %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
1003 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
1004 %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
1005 %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1006 %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
1008 oc=\E]R, use=linux-basic,
1010 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
1011 # get a block cursor for cvvis.
1012 # reported by Frank Heckenbach <frank@g-n-u.de>.
1013 linux2.2|linux 2.2.x console,
1014 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
1015 cvvis=\E[?25h\E[?8c, use=linux-c-nc,
1017 # Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
1018 # http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
1019 # Although the kernel has mappings for these, they were not in the default
1020 # font (tested with Debian and Fedora):
1026 linux2.6|linux 2.6.x console,
1027 acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
1029 enacs=\E)0, rmacs=^O,
1030 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1031 %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
1032 sgr0=\E[m\017, smacs=^N, use=linux2.2,
1034 # The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
1035 # It is the same as xterm's erase-saved-lines feature.
1036 linux3.0|linux 3.0 kernels,
1037 E3=\E[3J, use=linux2.6,
1039 # This is Linux console for ncurses.
1040 linux|linux console,
1043 # Subject: linux 2.6.26 vt back_color_erase
1044 # Changes to the Linux console driver broke bce model as reported in
1045 # https://bugzilla.novell.com/show_bug.cgi?id=418613
1047 # http://lkml.org/lkml/2008/4/26/305
1048 # http://lkml.org/lkml/2008/10/3/66
1049 linux2.6.26|linux console w/o bce,
1052 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1053 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
1054 ich@, ich1@, use=linux,
1056 # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
1057 # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1058 linux-koi8|linux with koi8 alternate character set,
1059 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
1060 \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
1061 \211w\210x\201y\230z\231{\267|\274~\224,
1062 use=linux, use=klone+koi8acs,
1064 # Another entry for KOI8-r with Qing Long's acsc.
1065 # (which one better complies with the standard?)
1066 linux-koi8r|linux with koi8-r alternate character set,
1067 use=linux, use=klone+koi8acs,
1069 # Entry for the latin1 and latin2 fonts
1070 linux-lat|linux with latin1 or latin2 alternate character set,
1071 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
1072 \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
1073 \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
1076 # This uses graphics from VT codeset instead of from cp437.
1077 # reason: cp437 (aka "straight to font") is not functional under luit.
1078 # from: Andrey V Lukyanov <land@long.yar.ru>.
1079 linux-vt|linux console using VT codes for graphics,
1080 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1082 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
1085 # This is based on the Linux console (relies on the console to perform some
1086 # of the functionality), but does not recognize as many control sequences.
1087 # The program comes bundled with an old (circa 1998) copy of the Linux
1088 # console terminfo. It recognizes some non-ANSI/VT100 sequences such as
1089 # \E* move cursor to home, as as \E[H
1091 # \EE move cursor to beginning of row
1092 # \E[y,xf same as \E[y,xH
1094 # Note: The status-line support is buggy (dsl does not work).
1095 kon|kon2|jfbterm|Kanji ON Linux console,
1097 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@,
1098 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
1102 # Another variant. There are two parts (src, src/lib) with the latter
1103 # comprising the escape-sequence parsing. The copyright notice on that
1104 # says it is based on GTerm by Timothy Miller.
1106 # The original developer "dragchan" has left, but as of March 2017 there is
1107 # (still dead) code from May 2015 here:
1108 # https://github.com/izmntuk/fbterm
1110 # The acsc string may be incorrect.
1112 # Not used here, the program recognizes escapes for italic, underline and
1113 # dim, rendering those as green, cyan and gray respectively.
1114 fbterm|FbTerm for Linux with framebuffer,
1115 colors#0x100, pairs#0x10000,
1116 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
1117 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
1118 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1119 initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
1120 setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
1121 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
1122 %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
1123 sgr0=\E[0;10m, smacs=\E[11m, use=linux,
1125 # 16-color linux console entry; this works with a 256-character
1126 # console font but bright background colors turn into dim ones when
1127 # you use a 512-character console font. This uses bold for bright
1128 # foreground colors and blink for bright background colors.
1130 # Interestingly, the original version of this entry in 2009 used a documented
1131 # (but nonstandard) SGR 21, which was supported in the Linux console since 1992
1132 # as an equivalent for SGR 22. Long after (early 2018), someone modified the
1133 # console driver to make it ignore SGR 21 because the ECMA-48 standard
1134 # suggested a different use for that particular code.
1135 linux-16color|linux console with 16 colors,
1136 colors#16, ncv#42, pairs#0x100,
1137 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
1138 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;22%;m,
1141 # bterm (bogl 0.1.18)
1142 # Implementation is in bogl-term.c
1143 # Key capabilities from linux terminfo entry
1146 # bterm only supports acs using wide-characters, has case for these: qjxamlkut
1147 # bterm does not support sgr, since it only processes one parameter -TD
1148 bterm|bogl virtual terminal,
1150 colors#8, cols#80, lines#24, pairs#64,
1151 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
1152 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r, cub1=^H, cud1=\n,
1153 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=\n,
1154 kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
1155 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
1156 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1157 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1158 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
1159 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
1160 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
1161 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=\r\n,
1162 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
1163 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1164 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
1169 # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1172 cols#80, it#8, lines#25,
1173 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
1174 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1175 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1176 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1177 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
1178 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1179 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
1180 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
1181 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
1182 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
1183 smso=\E[7m, smul=\E[4m,
1184 mach-bold|Mach Console with bold instead of underline,
1185 rmul=\E[0m, smul=\E[1m, use=mach,
1186 mach-color|Mach Console with ANSI color,
1188 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
1189 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
1191 # From: Samuel Thibault
1192 # Source: git://git.sv.gnu.org/hurd/gnumach.git
1193 # Files: i386/i386at/kd.c
1195 # Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
1197 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
1198 \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
1199 \263y\363z\362{\343|\330}\234~\376,
1200 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
1201 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
1202 invis=\E[8m, nel=\EE,
1203 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1204 2%;%?%p6%t;1%;%?%p7%t;8%;m,
1205 use=ecma+index, use=mach,
1207 mach-gnu-color|Mach Console with ANSI color,
1209 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
1210 setaf=\E[3%p1%dm, use=mach-gnu,
1212 # From: Marcus Brinkmann
1213 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
1215 # Comments in the original are summarized here:
1217 # hurd uses 8-bit characters (km).
1219 # Although it doesn't do XON/XOFF, we don't want padding characters (xon).
1221 # Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't
1222 # have the eat_newline_glitch. It doesn't support setting or removing tab
1225 # hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is
1226 # one byte instead three.
1228 # <ich1> is not included because hurd has insert mode.
1230 # hurd doesn't use ^J for scrolling, because this could put things into the
1231 # scrollback buffer.
1233 # gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
1234 # This is a GNU extension.
1236 # The original has commented-out ncv, but is restored here.
1238 # Reading the source, RIS resets cnorm, but not xmous.
1239 hurd|The GNU Hurd console server,
1240 am, bce, bw, eo, km, mir, msgr, xenl, xon,
1241 colors#8, it#8, ncv#18, pairs#64,
1242 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1244 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1245 clear=\Ec, cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1246 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1247 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1248 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
1249 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1250 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
1251 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
1252 il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m, kb2=\E[G,
1253 kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
1254 kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
1255 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1256 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1257 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
1258 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1259 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1260 kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
1261 rmacs=\E[10m, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
1262 rs1=\EM\E[?1000l, sc=\E7, setab=\E[4%p1%dm,
1264 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
1265 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1266 sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
1267 smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h,
1268 use=ecma+index, use=ecma+italics,
1274 # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1275 # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1276 # right corner without triggering a scroll. The ncurses terminfo library can
1277 # handle this case with the <ich1> capability, and prefers <am> for better
1278 # optimization. Bug: The <op> capability resets attributes.
1279 # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1280 # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1281 qnx|qnx4|qnx console,
1282 daisy, km, mir, msgr, xhpa, xt,
1283 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1284 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
1285 \303u\264v\301w\302x\263,
1286 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1287 cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
1288 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1289 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1290 il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
1291 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1292 kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1293 kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1294 kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1295 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1296 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1297 kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1298 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1299 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1300 kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1301 kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1302 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1303 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1304 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1305 kext=\377\270, kf1=\377\201, kf10=\377\212,
1306 kf11=\377\256, kf12=\377\257, kf13=\377\213,
1307 kf14=\377\214, kf15=\377\215, kf16=\377\216,
1308 kf17=\377\217, kf18=\377\220, kf19=\377\221,
1309 kf2=\377\202, kf20=\377\222, kf21=\377\223,
1310 kf22=\377\224, kf23=\377\333, kf24=\377\334,
1311 kf25=\377\225, kf26=\377\226, kf27=\377\227,
1312 kf28=\377\230, kf29=\377\231, kf3=\377\203,
1313 kf30=\377\232, kf31=\377\233, kf32=\377\234,
1314 kf33=\377\235, kf34=\377\236, kf35=\377\276,
1315 kf36=\377\277, kf37=\377\321, kf38=\377\322,
1316 kf39=\377\323, kf4=\377\204, kf40=\377\324,
1317 kf41=\377\325, kf42=\377\326, kf43=\377\327,
1318 kf44=\377\330, kf45=\377\331, kf46=\377\332,
1319 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1320 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1321 khlp=\377\350, khome=\377\240, khts=\377\342,
1322 kich1=\377\253, kil1=\377\273, kind=\377\261,
1323 kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1324 knp=\377\252, knxt=\377\312, kopn=\377\357,
1325 kopt=\377\353, kpp=\377\242, kprt=\377\255,
1326 kprv=\377\302, krdo=\377\336, kref=\377\354,
1327 kres=\377\360, krfr=\377\347, kri=\377\271,
1328 krmir=\377\313, krpl=\377\362, krst=\377\352,
1329 ksav=\377\361, kslt=\377\247, kspd=\377\335,
1330 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1331 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1332 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1333 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1337 qnxt|qnxt4|QNX4 terminal,
1340 qnxm|QNX4 with mouse events,
1342 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
1343 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
1344 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
1345 smicm=\E/>2h, use=qnx4,
1350 # Monochrome QNX4 terminal or console. Setting this terminal type will
1351 # allow an application running on a color console to behave as if it
1352 # were a monochrome terminal. Output will be through stdout instead of
1353 # console writes because the term routines will recognize that the
1354 # terminal name starts with 'qnxt'.
1356 qnxtmono|Monochrome QNX4 terminal or console,
1360 # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1361 # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1362 # (TD: derive from original qnx4 entry)
1363 qnxt2|qnx 2.15 serial terminal,
1365 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1366 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
1368 # QNX ANSI terminal definition
1371 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
1372 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1373 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
1374 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=\r,
1375 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
1376 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1377 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
1378 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
1379 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
1380 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
1381 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
1382 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
1383 ind=\E[S, invis=\E[9m,
1384 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
1385 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
1386 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
1387 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
1388 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
1389 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
1390 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
1391 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
1392 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
1393 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
1394 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
1395 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
1396 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
1397 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
1398 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
1399 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
1400 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
1401 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
1402 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
1403 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
1404 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
1405 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
1406 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
1407 rev=\E[7m, ri=\E[T, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
1408 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
1409 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1410 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1412 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
1414 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
1415 %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
1416 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
1417 smul=\E[4m, tbc=\E[3g,
1418 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=ansi+rep,
1421 qansi|QNX ansi with console writes,
1422 daisy, xhpa, use=qansi-g,
1424 qansi-t|QNX ansi without console writes,
1427 qansi-m|QNX ansi with mouse,
1429 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
1430 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
1431 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
1432 smicm=\E[>2h, use=qansi,
1434 qansi-w|QNX ansi for windows,
1439 # SCO console and SOS-Syscons console for 386bsd
1440 # (scoansi: had unknown capabilities
1441 # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
1442 # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
1443 # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
1444 # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
1445 # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
1446 # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
1447 # on the <smacs>=\E[12m -- esr)
1449 # klone+sgr-dumb is an error since the acsc does not match -TD
1451 # In this description based on SCO's keyboard(HW) manpage list of default
1452 # function key values:
1453 # F13-F24 are shifted F1-F12
1454 # F25-F36 are control F1-F12
1455 # F37-F48 are shift+control F1-F12
1457 # hpa/vpa work in the console, but not in scoterm:
1461 # SCO's terminfo uses
1464 # which do not work (console or scoterm).
1466 # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
1467 scoansi-old|SCO Extended ANSI standard crt (5.0.5),
1468 OTbs, am, bce, eo, xon,
1469 colors#8, cols#80, it#8, lines#25, pairs#64,
1470 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM
1471 NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB
1473 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
1474 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
1475 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
1476 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
1477 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
1478 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
1479 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
1480 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
1481 ind=\E[S, invis=\E[8m, kbeg=\E[E, kbs=^H, kcbt=\E[Z,
1482 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
1483 kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X,
1484 kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
1485 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
1486 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
1487 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
1488 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
1489 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
1490 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
1491 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
1492 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
1493 knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, rev=\E[7m,
1494 ri=\E[T, rmacs=\E[10m, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1495 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1496 sgr0=\E[0;10m, smacs=\E[12m, smam=\E[?7h, smso=\E[7m,
1497 smul=\E[4m, use=ecma+index,
1498 scoansi-new|SCO Extended ANSI standard crt (5.0.6),
1500 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
1501 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
1502 rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
1503 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
1504 %p7%t;8%;%?%p9%t;12%e;10%;m,
1505 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
1506 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
1507 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
1508 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
1509 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
1511 # make this easy to change...
1512 scoansi|SCO Extended ANSI standard crt,
1517 # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1518 # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1519 # for the application keypad mode. We have added iris-ansi-ap rather than
1520 # change the original to keypad mode.
1522 # (iris-ansi: added rmam/smam based on init string -- esr)
1524 # This entry, and those derived from it, is used in xwsh (also known as
1525 # winterm). Some capabilities that do not fit into the terminfo model
1526 # include the shift- and control-functionkeys:
1528 # F1-F12 generate different codes when shift or control modifiers are used.
1532 # control-F1 \E[025q
1534 # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1535 # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1537 # The cursor keys also have different codes:
1538 # control-up \E[162q
1539 # control-down \E[165q
1540 # control-left \E[159q
1541 # control-right \E[168q
1544 # shift-down \E[164q
1545 # shift-left \E[158q
1546 # shift-right \E[167q
1548 # control-tab \[072q
1550 iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1552 cols#80, it#8, lines#40,
1553 bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1554 cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
1555 cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
1556 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1557 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1558 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1559 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1560 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1561 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1562 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1563 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
1564 kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
1565 kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
1566 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
1567 kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
1568 kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
1569 nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
1570 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
1571 sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1573 iris-ansi-ap|IRIS ANSI in application-keypad mode,
1574 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1575 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
1577 # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1578 # (T.Dickey 98/1/24)
1579 iris-color|xwsh|IRIX ANSI with color,
1581 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1582 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, rmul=\E[24m, rs1=\Ec,
1583 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1584 use=ecma+italics, use=vt100+enq, use=klone+color,
1587 #### OpenBSD consoles
1589 # From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
1591 # The following terminal descriptions for the AMD/Intel PC console
1592 # were prepared based on information contained in the OpenBSD-4.9
1593 # termtypes.master and wscons(4) & vga(4) manuals (2010, November).
1595 # Added bce based on testing with tack -TD
1596 # Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
1597 # Changed kbs to DEL and removed keys that duplicate stty settings -TD
1599 # Notes from testing with vttest:
1600 # fails wrapping test
1602 # identifies as vt200 with selective erase, but does not implement DECSCA
1605 # ESC # 8 DEC Screen Alignment Test (DECALN).
1606 # CSI ? 5 h Reverse Video (DECSCNM).
1608 pccon+keys|OpenBSD PC keyboard keys,
1609 kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1610 kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
1611 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1612 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1613 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
1614 kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
1615 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1616 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
1618 pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
1619 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y
1621 sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
1623 pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
1624 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1626 enacs=\E)0$<5>, rmacs=\E(B$<5>,
1627 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
1629 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
1630 # underline renders as color
1631 pccon+colors|ANSI colors for OpenBSD PC console,
1633 colors#8, ncv#2, pairs#64,
1634 op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
1635 pccon+base|base capabilities for OpenBSD PC console,
1636 am, km, mc5i, msgr, npc, nxon, xenl, xon,
1637 cols#80, it#8, lines#24,
1638 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
1639 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
1640 dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
1641 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1642 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
1643 rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h,
1644 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
1646 pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
1647 use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
1648 pccon0|OpenBSD PC console with simple ASCII pseudographics,
1649 use=pccon0-m, use=pccon+colors,
1650 pccon-m|OpenBSD PC console without colors,
1651 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
1652 pccon|OpenBSD PC console,
1653 use=pccon-m, use=pccon+colors,
1655 #### NetBSD consoles
1657 # pcvt termcap database entries (corresponding to release 3.31)
1658 # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1660 # (For the terminfo master file, I translated these into terminfo syntax.
1661 # Then I dropped all the pseudo-HP entries. we don't want and can't use
1662 # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1663 # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1665 # NOTE: <ich1> has been taken out of this entry. for reference, it should
1666 # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1667 # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1668 pcvtXX|pcvt vt200 emulator (DEC VT220),
1669 am, km, mir, msgr, xenl,
1671 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
1673 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1674 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
1675 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1676 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1677 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1678 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1679 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1680 il=\E[%p1%dL, il1=\E[L, ind=\ED,
1681 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
1682 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1683 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1684 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1685 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1686 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1687 ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1688 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1689 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1690 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1691 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1694 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1695 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1696 # 50 lines entries; 80 columns
1697 pcvt25|dec vt220 emulation with 25 lines,
1699 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1700 pcvt28|dec vt220 emulation with 28 lines,
1702 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1703 pcvt35|dec vt220 emulation with 35 lines,
1705 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1706 pcvt40|dec vt220 emulation with 40 lines,
1708 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1709 pcvt43|dec vt220 emulation with 43 lines,
1711 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1712 pcvt50|dec vt220 emulation with 50 lines,
1714 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1716 # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1717 # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1718 # 50 lines entries; 132 columns
1719 pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1721 is2=\E[1;25r\E[25;1H, use=pcvtXX,
1722 pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1724 is2=\E[1;28r\E[28;1H, use=pcvtXX,
1725 pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1727 is2=\E[1;35r\E[35;1H, use=pcvtXX,
1728 pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1730 is2=\E[1;40r\E[40;1H, use=pcvtXX,
1731 pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1733 is2=\E[1;43r\E[43;1H, use=pcvtXX,
1734 pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1736 is2=\E[1;50r\E[50;1H, use=pcvtXX,
1738 # OpenBSD implements a color variation
1739 pcvt25-color|dec vt220 emulation with 25 lines and color,
1741 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~,
1742 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
1743 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1744 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1745 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX,
1748 # Terminfo entries to enable the use of the ncurses library in colour on a
1749 # NetBSD-arm32 console (only tested on a RiscPC).
1750 # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1751 # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1752 # typo in invis - TD
1753 arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1754 am, bce, msgr, xenl, xon,
1755 cols#80, it#8, lines#30,
1756 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1757 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1758 clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
1759 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
1760 cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1761 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1762 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1763 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
1764 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1765 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1766 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1767 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1768 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
1769 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1770 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1772 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
1773 %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
1774 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1775 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
1778 arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1779 cols#132, lines#50, use=arm100,
1781 # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1782 # manufactured by Sharp for the Japanese market.
1783 # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1784 x68k|x68k-ite|NetBSD/x68k ITE,
1786 kclr=\E[9~, khlp=\E[28~, use=vt220,
1789 # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1791 # (still unfinished, but good enough so far.)
1792 ofcons|DNARD OpenFirmware console,
1795 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
1796 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1797 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1798 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1799 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1800 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1801 il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
1802 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1803 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1804 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1805 kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
1806 rmso=\2330m, rmul=\2330m,
1807 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
1808 %;%?%p1%p3%|%t;7%;m,
1809 sgr0=\2330m, smso=\2337m, smul=\2334m,
1811 # NetBSD "wscons" emulator in vt220 mode.
1812 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
1813 # The emulator renders underlined text in red. Colors are otherwise usable.
1815 # Testing the emulator and reading the source code (NetBSD 2.0), it appears
1816 # that "vt220" is inaccurate. There are a few vt220-features, but most of the
1817 # vt220 screens in vttest do not work with this emulator. For instance, it
1818 # identifies itself (primary DA response) as a vt220 with selective erase. But
1819 # the selective erase feature does not work. The secondary response is copied
1820 # from Kermit's emulation of vt220, does not correspond to actual vt220. At
1821 # the level of detail in a termcap, it is a passable emulator, since ECH does
1822 # work. Don't use it on a VMS system -TD
1823 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1825 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
1826 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
1827 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
1828 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
1829 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
1830 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
1831 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
1833 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1836 # NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
1838 # TERM is by default vt100 for the console, wsvt25 for other ttys.
1839 # Initial testing set TERM=xterm, based on comments by developers, found too
1840 # many differences to continue in that path. However, test-results may be
1841 # useful to people curious about compatibility with xterm.
1843 # Testing with tack:
1845 # Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
1846 # There is color-bleeding in the color-pairs screen.
1847 # Attributes do not work with color
1849 # Failed: kf1-kf4, kf13-kf48, khome, kend
1850 # (effectively xterm-r6 for function-keys)
1851 # None of the function or cursor key-modifiers are encoded.
1852 # Console hangs in the smm/rmm test if TERM=xterm, does not show test
1854 # Testing with vttest:
1855 # -------------------
1856 # Identifies as vt220 with selective erase
1857 # (however, selective erase refers to DECSCA, SPA)
1858 # Does not implement vt52
1859 # Uses spaces to simulate double-size characters
1860 # Does not support 8-bit controls
1861 # Does not support VT220 reports
1862 # Does not support send/receive mode
1863 # Supports ECH (like rxvt)
1864 # Does not support DECSCA
1865 # Does not support any of the ISO-6429 cursor-movement
1866 # Does not support any of the ISO-6429 miscellaneous tests
1867 # (SL/SR also leave unexpected char on screen too)
1868 # Background does not change in menu 11.6.9 (SGR 22-27)
1869 # None of the xterm special features tests work
1870 netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
1873 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1875 rcons|BSD rasterconsole,
1877 # Color version of above. Color currently only provided by NetBSD.
1878 rcons-color|BSD rasterconsole with ANSI color,
1881 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
1883 # mgterm -- MGL/MGL2, MobileGear Graphic Library
1884 # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
1885 # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
1886 # -- compare with cons25w
1887 mgterm|MGL/MGL2 MobileGear Graphic Library,
1888 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
1889 colors#8, cols#80, it#8, lines#18, pairs#64,
1890 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1891 cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1892 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1893 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1894 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
1895 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
1896 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1897 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
1898 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1899 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
1900 kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q,
1901 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1902 kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8,
1903 rev=\E[7m, ri=\E[T, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
1904 setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m,
1905 vpa=\E[%i%p1%dd, use=ecma+index,
1907 #### FreeBSD console entries
1909 # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1910 # Andrey Chernov maintains the FreeBSD termcap distributions.
1912 # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1913 # or comment out the :cb: capability in the console entry.
1915 # Alexander Lukyanov reports:
1916 # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1917 # Now el1 clears not only to the line beginning, but also a large chunk
1918 # of previous line. But there is another bug - ech does not work at all.
1922 # common entry without semigraphics
1923 # Bug: The <op> capability resets attributes.
1924 # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1925 # instance el1 does if the cursor is moved to the right margin first. Removed
1926 # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1928 # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1929 # Note that this disables standout with color.
1931 # The emulator sends difference strings based on shift- and control-keys,
1933 # F13-F24 are shifted F1-F12
1934 # F25-F36 are control F1-F12
1935 # F37-F48 are shift+control F1-F12
1936 cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1937 am, bce, bw, eo, msgr, npc,
1938 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1939 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1940 cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1941 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1942 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1943 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1944 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1945 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
1946 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
1947 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1948 kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
1949 kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a,
1950 kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N,
1951 kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j,
1952 kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o,
1953 kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s,
1954 kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x,
1955 kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[,
1956 kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`,
1957 kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
1958 khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E,
1959 op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rmso=\E[m,
1960 rs2=\E[x\E[m\Ec, sc=\E7, setab=\E[4%p1%dm,
1962 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
1964 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, use=ecma+index,
1965 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1966 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
1967 \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
1970 cons25-debian|freebsd console with debian backspace (25-line ansi mode),
1971 kbs=^?, kdch1=\E[3~, use=cons25,
1972 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
1974 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
1975 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
1976 smul=\E[4m, use=cons25,
1977 cons30|ansi80x30|freebsd console (30-line ansi mode),
1978 lines#30, use=cons25,
1979 cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
1980 lines#30, use=cons25-m,
1981 cons43|ansi80x43|freebsd console (43-line ansi mode),
1982 lines#43, use=cons25,
1983 cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
1984 lines#43, use=cons25-m,
1985 cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
1986 lines#50, use=cons25,
1987 cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
1988 lines#50, use=cons25-m,
1989 cons60|ansi80x60|freebsd console (60-line ansi mode),
1990 lines#60, use=cons25,
1991 cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
1992 lines#60, use=cons25-m,
1993 cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
1994 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
1995 \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
1998 cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
2000 op@, rmul=\E[m, setab@, setaf@,
2001 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
2002 %t;30;1%;%?%p6%t;1%;m,
2003 smul=\E[4m, use=cons25r,
2004 cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
2005 lines#50, use=cons25r,
2006 cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
2007 lines#50, use=cons25r-m,
2008 cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
2009 lines#60, use=cons25r,
2010 cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
2011 lines#60, use=cons25r-m,
2012 # ISO 8859-1 FreeBSD console
2013 cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
2014 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
2015 \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
2016 \226v\227w\230x\231y\232z\233~\237,
2018 cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
2020 bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
2021 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
2022 smul=\E[4m, use=cons25l1,
2023 cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
2024 lines#50, use=cons25l1,
2025 cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
2026 lines#50, use=cons25l1-m,
2027 cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
2028 lines#60, use=cons25l1,
2029 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
2030 lines#60, use=cons25l1-m,
2032 # Starting with FreeBSD 8, an alternative configuration for syscons is provided,
2033 # which is intended to be xterm-compatible. See for example
2034 # http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
2035 # in particular scterm-teken.c
2037 # For FreeBSD 9 and 10:
2038 # --------------------
2039 # The /etc/ttys entries for console and other ttys are all configured to set
2042 # Testing with tack:
2043 # There is no VT100 line-drawing (uses +'s and -'s)
2044 # Shifted f1-f12 give cons25 codes, rather than xterm function-keys
2046 # Testing with vttest:
2047 # Menu 2 diamonds don't work, blink ditto, light background ditto
2048 # The terminal identifies itself as VT100 with AVO
2049 # There is no VT52 support
2050 # There is no doublesize character support
2051 # The terminal supports ECH (like rxvt)
2052 # The terminal does not support send/receive mode
2053 # The terminal supports all of the ISO-6429 cursor-movement
2054 # The terminal supports some of the ISO-6429 miscellaneous tests
2055 # (SL/SR also leave unexpected char on screen too)
2057 # Considering cons25 as a base, the line-drawing mostly works, but is missing
2058 # the cells which happen to have ASCII control-character values:
2059 # - ^X arrow pointing up
2060 # . ^Y arrow pointing down
2064 # Those are removed from this entry's acsc string to avoid confusion.
2065 # The resulting description provides correct line-drawing and function-keys -TD
2066 teken|syscons with teken,
2068 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
2069 \304t\303u\264v\301w\302x\263y\363z\362~\371,
2070 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
2071 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2072 kdch1=\E[3~, kend=\E[F, kent=\r, kf1=\EOP, kf10=\E[21~,
2073 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2074 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2075 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
2076 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2077 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
2079 #### 386BSD and BSD/OS Consoles
2082 # This was the original 386BSD console entry (I think).
2083 # Some places it's named oldpc3|oldibmpc3.
2084 # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
2085 origpc3|origibmpc3|IBM PC 386BSD Console,
2086 OTbs, am, bw, eo, xon,
2088 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
2090 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
2091 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
2092 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
2093 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
2094 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
2095 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
2097 # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
2098 oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
2101 bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
2102 ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2103 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
2104 knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
2106 # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
2107 # Note, the emulator supports many of the additional console features
2108 # listed in the iBCS2 (e.g. character-set selection) though not all
2109 # are described here. This entry really ought to be upgraded.
2110 # Also note, the console will also work with fewer lines after doing
2111 # "stty rows NN", e.g. to use 24 lines.
2112 # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
2113 # Bug: The <op> capability resets attributes.
2114 bsdos-pc|IBM PC BSD/OS Console,
2115 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
2116 %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
2117 use=bsdos-pc-nobold,
2119 bsdos-pc-nobold|BSD/OS PC console w/o bold,
2120 use=klone+color, use=bsdos-pc-m,
2122 bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
2123 OTbs, am, eo, km, xon,
2124 cols#80, it#8, lines#25,
2125 bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
2126 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2127 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2128 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
2129 il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
2130 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
2131 kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
2132 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
2133 %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
2136 # Old names for BSD/OS PC console used in releases before 4.1.
2137 pc3|BSD/OS on the PC Console,
2138 use=bsdos-pc-nobold,
2139 ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
2142 # BSD/OS on the SPARC
2143 bsdos-sparc|Sun SPARC BSD/OS Console,
2146 # BSD/OS on the PowerPC
2147 bsdos-ppc|PowerPC BSD/OS Console,
2152 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
2154 # Actually (TD pointed this out at the time the acsc string was added):
2155 # vt52 shouldn't define full acsc since most of the cells don't match.
2156 # see vt100 manual page A-31. This is the list that does match:
2165 # The line-drawing happens to work in several terminal emulators, but should
2166 # not be used as a guide to the capabilities of the vt52. Note in particular
2167 # that vt52 does not support line-drawing characters (the scan-X values refer
2168 # to a crude plotting feature) -TD
2171 cols#80, it#8, lines#24,
2172 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=\r,
2173 cub1=\ED, cud1=\EB, cuf1=\EC,
2174 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
2175 el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
2176 kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
2178 #### DEC VT100 and compatibles
2180 # DEC terminals from the vt100 forward are collected here. Older DEC terminals
2181 # and micro consoles can be found in the `obsolete' section. More details on
2182 # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
2183 # found near the end of this file.
2185 # Except where noted, these entries are DEC's official terminfos.
2186 # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
2187 # Engineering for more information. Updated terminfos and termcaps
2188 # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
2190 # In October 1995 DEC sold its terminals business, including the VT and Dorio
2191 # line and trademark, to SunRiver Data Systems. SunRiver has since changed
2192 # its name to Boundless Technologies; see http://www.boundless.com.
2195 # NOTE: Any VT100 emulation, whether in hardware or software, almost
2196 # certainly includes what DEC called the `Level 1 editing extension' codes;
2197 # only the very oldest VT100s lacked these and there probably aren't any of
2198 # those left alive. To capture these, use one of the VT102 entries.
2200 # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
2201 # since the cursor is left in a different position while in the
2202 # weird state (concept at beginning of next line, vt100 at end
2203 # of this line) so all versions of vi before 3.7 don't handle
2204 # <xenl> right on vt100. The correct way to handle <xenl> is when
2205 # you output the char in column 80, immediately output CR LF
2206 # and then assume you are in column 1 of the next line. If <xenl>
2207 # is on, am should be on too.
2209 # I assume you have smooth scroll off or are at a slow enough baud
2210 # rate that it doesn't matter (1200? or less). Also this assumes
2211 # that you set auto-nl to "on", if you set it off use vt100-nam
2214 # The padding requirements listed here are guesses. It is strongly
2215 # recommended that xon/xoff be enabled, as this is assumed here.
2217 # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
2218 # tab settings are in non-volatile memory and don't need to be
2219 # reset upon login. Also setting the number of columns glitches
2220 # the screen annoyingly. You can type "reset" to get them set.
2222 # The VT100 series terminals have cursor ("arrows") keys which can operate
2223 # in two different modes: Cursor Mode and Application Mode. Cursor Mode
2224 # is the reset state, and is assumed to be the normal state. Application
2225 # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
2226 # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
2227 # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
2228 # was provided primarily as an aid to the porting of VT52 applications. It is
2229 # assumed that the cursor keys are normally in Cursor Mode, and expected that
2230 # applications such as vi will always transmit the <smkx> string. Therefore,
2231 # the definitions for the cursor keys are made to match what the terminal
2232 # transmits after the <smkx> string is transmitted. If the <smkx> string
2233 # is a null string or is not defined, then cursor keys are assumed to be in
2234 # "Cursor Mode", and the cursor keys definitions should match that assumption,
2235 # else the application may fail. It is also expected that applications will
2236 # always transmit the <rmkx> string to the terminal before they exit.
2238 # The VT100 series terminals have an auxiliary keypad, commonly referred to as
2239 # the "Numeric Keypad", because it is a cluster of numeric and function keys.
2240 # The Numeric Keypad which can operate in two different modes: Numeric Mode and
2241 # Application Mode. Numeric Mode is the reset state, and is assumed to be
2242 # the normal state. Application Mode is the "set" state. In Numeric Mode,
2243 # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
2244 # Enter key transmits the same as the Return key (Note: the Return key
2245 # can be configured to send either LF (\015) or CR LF). In Application Mode,
2246 # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
2247 # always send the same "Esc O {code}" sequences. It is assumed that the keypad
2248 # is normally in Numeric Mode. If an application requires that the keypad be
2249 # in Application Mode then it is expected that the user, or the application,
2250 # will set the TERM environment variable to point to a terminfo entry which has
2251 # defined the <smkx> string to include the codes that switch the keypad into
2252 # Application Mode, and the terminfo entry will also define function key
2253 # fields to match the Application Mode control codes. If the <smkx> string
2254 # is a null string or is not defined, then the keypad is assumed to be in
2255 # Numeric Mode. If the <smkx> string switches the keypad into Application
2256 # Mode, it is expected that the <rmkx> string will contain the control codes
2257 # necessary to reset the keypad to "Normal" mode, and it is also expected that
2258 # applications which transmit the <smkx> string will also always transmit the
2259 # <rmkx> string to the terminal before they exit.
2261 # Here's a diagram of the VT100 keypad keys with their bindings.
2262 # The top line is the name of the key (some DEC keyboards have the keys
2263 # labelled somewhat differently, like GOLD instead of PF1, but this is
2264 # the most "official" name). The second line is the escape sequence it
2265 # generates in Application Keypad mode (where "$" means the ESC
2266 # character). The third line contains two items, first the mapping of
2267 # the key in terminfo, and then in termcap.
2268 # _______________________________________
2269 # | PF1 | PF2 | PF3 | PF4 |
2270 # | $OP | $OQ | $OR | $OS |
2271 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2273 # | $Ow | $Ox | $Oy | $Om |
2274 # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
2276 # | $Ot | $Ou | $Ov | $Ol |
2277 # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
2279 # | $Oq | $Or | $Os | enter |
2280 # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
2283 # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
2285 # Note however, that the arrangement of the 5-key ka1-kc3 do not follow the
2286 # terminfo guidelines. That is a compromise used to assign the remaining
2287 # keys on the keypad to kf5-kf0, used on older systems with legacy termcap
2289 vt100+keypad|dec vt100 numeric keypad no fkeys,
2290 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn,
2291 vt100+pfkeys|dec vt100 numeric keypad,
2292 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2294 vt100+fnkeys|dec vt100 numeric keypad,
2295 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl,
2296 kf9=\EOw, use=vt100+pfkeys,
2298 # A better adaptation to modern keyboards such as the PC's, which have a dozen
2299 # function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to
2300 # use the 5-key arrangement to model the arrow keys as suggested in the
2301 # terminfo guidelines:
2302 # _______________________________________
2303 # | PF1 | PF2 | PF3 | PF4 |
2304 # | $OP | $OQ | $OR | $OS |
2305 # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
2307 # | $Ow | $Ox | $Oy | $Om |
2308 # |_ka1__K1_|_________|_ka3__K3_|_________|
2310 # | $Ot | $Ou | $Ov | $Ol |
2311 # |_________|_kb2__K2_|_________|_________|
2313 # | $Oq | $Or | $Os | enter |
2314 # |_kc1__K4_|_________|_kc3__K5_| $OM |
2317 # |___________________|_________|_kent_@8_|
2319 vt220+keypad|dec vt220 numeric keypad,
2320 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM,
2321 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt,
2324 vt100+enq|ncurses extension for vt100-style ENQ,
2325 u8=\E[?1;2c, use=ansi+enq,
2326 vt102+enq|ncurses extension for vt102-style ENQ,
2327 u8=\E[?6c, use=ansi+enq,
2329 # And here, for those of you with orphaned VT100s lacking documentation, is
2330 # a description of the soft switches invoked when you do `Set Up'.
2332 # Scroll 0-Jump Shifted 3 0-#
2333 # | 1-Smooth | 1-British pound sign
2334 # | Autorepeat 0-Off | Wrap Around 0-Off
2336 # | | Screen 0-Dark Bkg | | New Line 0-Off
2337 # | | | 1-Light Bkg | | | 1-On
2338 # | | | Cursor 0-Underline | | | Interlace 0-Off
2339 # | | | | 1-Block | | | | 1-On
2341 # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
2343 # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
2344 # | | | 1-On | | | 1-50 Hz
2345 # | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
2346 # | | 1-ANSI | | 1-8 Bits
2347 # | Keyclick 0-Off | Parity 0-Off
2349 # Margin Bell 0-Off Parity Sense 0-Odd
2352 # The following SET-UP modes are assumed for normal operation:
2353 # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
2354 # WRAP_AROUND_ON JUMP_SCROLL_OFF
2355 # Other SET-UP modes may be set for operator convenience or communication
2356 # requirements; I recommend
2357 # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
2358 # Unless you have a graphics add-on such as Digital Engineering's VT640
2359 # (and even then, whenever it can be arranged!) you should set
2362 # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
2363 vt100|vt100-am|dec vt100 (w/advanced video),
2364 OTbs, mc5i, xenl, xon,
2366 csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
2367 kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2368 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
2369 rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
2371 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2372 %;m%?%p9%t\016%e\017%;$<2>,
2373 smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
2374 use=vt100+4bsd, use=vt100+fnkeys,
2375 vt100+4bsd|dec vt100 from 4.0BSD,
2377 cols#80, it#8, lines#24,
2378 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2379 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2380 clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
2381 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
2382 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
2383 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
2384 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
2385 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2386 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
2387 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2388 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
2389 %;m%?%p9%t\016%e\017%;$<2>,
2390 sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
2391 smul=\E[4m$<2>, tbc=\E[3g,
2392 vt100nam|vt100-nam|vt100 no automargins,
2394 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
2395 vt100-vb|dec vt100 (w/advanced video) & no beep,
2396 bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
2398 # Ordinary vt100 in 132 column ("wide") mode.
2399 vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
2401 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
2402 vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
2403 cols#132, lines#14, vt@,
2404 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
2406 # vt100 with no advanced video.
2407 vt100-nav|vt100 without advanced video option,
2409 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
2411 vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
2412 cols#132, lines#14, use=vt100-nav,
2414 # vt100 with one of the 24 lines used as a status line.
2415 # We put the status line on the top.
2416 vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
2419 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
2420 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
2421 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
2422 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
2424 # Status line at bottom.
2425 # Clearing the screen will clobber status line.
2426 vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
2429 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
2430 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
2432 # Most of the `vt100' emulators out there actually emulate a vt102
2433 # This entry (or vt102-nsgr) is probably the right thing to use for
2436 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
2438 vt102-w|dec vt102 in wide mode,
2440 rs3=\E[?3h, use=vt102,
2442 # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
2443 # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
2444 # string in the canonical vt100 entry above leaves the screen littered
2445 # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
2446 # after highlight turnoffs. This entry should fix that, and even leave
2447 # ACS support working, at the cost of making multiple-highlight changes
2448 # slightly more expensive.
2449 # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
2450 vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
2451 sgr@, sgr0=\E[m, use=vt102,
2453 # VT125 Graphics CRT. Clear screen also erases graphics
2454 # Some vt125's came configured with vt102 support.
2455 vt125|vt125 graphics terminal,
2457 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
2459 # This isn't a DEC entry, it came from University of Wisconsin.
2460 # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
2463 cols#80, it#8, lines#24, vt#3,
2464 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
2465 clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2466 cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
2467 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
2468 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
2469 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
2470 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
2471 kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
2472 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
2474 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2475 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
2476 smso=\E[7m$<2/>, smul=\E[4m$<2/>,
2478 # vt132 - like vt100 but slower and has ins/del line and such.
2479 # I'm told that <smir>/<rmir> are backwards in the terminal from the
2480 # manual and from the ANSI standard, this describes the actual
2481 # terminal. I've never actually used a vt132 myself, so this
2486 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
2487 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
2489 # This vt220 description maps F5--F9 to the second block of function keys
2490 # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
2491 # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
2492 # PF1--PF4 are used as F1--F4.
2495 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
2496 OTbs, OTpt, am, mir, msgr, xenl, xon,
2497 cols#80, lines#24, vt#3,
2499 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2500 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2501 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
2502 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
2503 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2504 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2505 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
2506 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2507 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
2508 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
2509 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
2510 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
2511 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
2512 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2513 rmso=\E[27m, rmul=\E[24m,
2514 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2515 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2516 %p9%t\E(0%e\E(B%;$<2>,
2517 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2518 smso=\E[7m, smul=\E[4m,
2520 # A much better description of the VT200/220; used to be vt220-8
2521 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
2522 # designation to accommodate bug in pcvt -TD
2524 # Here's a picture of the VT220 editing keypad:
2525 # +--------+--------+--------+
2526 # | Find | Insert | Remove |
2527 # +--------+--------+--------+
2528 # | Select | Prev | Next |
2529 # +--------+--------+--------+
2530 vt220|vt200|dec vt220,
2531 OTbs, am, mir, msgr, xenl, xon,
2532 cols#80, it#8, lines#24, vt#3,
2533 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2534 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
2535 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2536 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2537 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2538 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2539 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
2540 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
2541 ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
2542 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2543 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
2544 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
2545 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2546 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2547 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2548 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
2549 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2550 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
2551 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
2552 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
2554 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2555 %p9%t\E(0%e\E(B%;$<2>,
2556 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2557 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
2559 vt220-w|vt200-w|DEC vt220 in wide mode,
2561 rs3=\E[?3h, use=vt220,
2562 vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
2563 OTbs, am, mc5i, mir, msgr, xenl, xon,
2564 cols#80, it#8, lines#24, vt#3,
2565 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2566 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
2567 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2568 cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
2569 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
2570 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2571 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
2572 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
2573 ich=\233%p1%d@, if=/usr/share/tabset/vt100,
2574 il=\233%p1%dL, il1=\233L, ind=\ED,
2575 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
2576 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
2577 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
2578 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
2579 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
2580 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
2581 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
2582 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
2583 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
2584 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
2585 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
2586 rmul=\23324m, rs1=\233?3l, sc=\E7,
2587 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
2588 %?%p9%t\E(0%e\E(B%;$<2>,
2589 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
2590 smso=\2337m, smul=\2334m, tbc=\2333g,
2593 # This vt220 description regards F6--F10 as the second block of function keys
2594 # at the top of the keyboard. This mapping follows the description given
2595 # in the VT220 Programmer Reference Manual and agrees with the labeling
2596 # on some terminals that emulate the vt220. There is no support for an F5.
2597 # See vt220 for an alternate mapping.
2599 vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
2600 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2601 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2602 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
2603 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
2605 vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
2607 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2609 # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
2610 # (not an official DEC entry!)
2611 # The problem with real vt220 terminals is they don't send escapes when in
2612 # in vt220 mode. This can be gotten around two ways. 1> don't send
2613 # escapes or 2> put the vt220 into vt100 mode and use all the nifty
2614 # features of vt100 advanced video which it then has.
2616 # This entry takes the view of putting a vt220 into vt100 mode so
2617 # you can use the escape key in emacs and everything else which needs it.
2619 # You probably don't want to use this on a VMS machine since VMS will think
2620 # it has a vt220 and will get fouled up coming out of emacs
2622 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
2623 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
2625 vt200-js|vt220-js|dec vt200 series with jump scroll,
2628 bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2629 cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2630 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
2631 ht=^I, il1=\E[L, ind=\ED,
2632 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
2634 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2635 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
2636 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
2637 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
2638 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
2639 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
2641 # This was DEC's vt320. Use the purpose-built one below instead
2642 #vt320|DEC VT320 in vt100 emulation mode,
2645 # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
2647 vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
2649 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
2651 # These entries are not DEC's official ones, they were purpose-built for the
2652 # VT320. Here are the designer's notes:
2653 # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
2654 # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
2655 # khome is Home on a PC kbd. Actually 'FIND' on a VT.
2656 # Things that use <knxt> usually use tab anyways... and things that don't use
2657 # tab usually use <knxt> instead...
2658 # kprv is same as tab - Backtab is useless...
2659 # I left out <sgr> because of its RIDICULOUS complexity,
2660 # and the resulting fact that it causes the termcap translation of the entry
2661 # to SMASH the 1k-barrier...
2662 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2663 # (vt320: uncommented <fsl> --esr)
2664 vt320|vt300|dec vt320 7 bit terminal,
2665 am, hs, mir, msgr, xenl,
2666 cols#80, lines#24, wsl#80,
2667 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2668 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2669 clear=\E[H\E[2J, cnorm=\E[?25h, cr=\r,
2670 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2671 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2672 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2673 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2674 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
2675 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
2676 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2677 kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2678 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
2679 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2680 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2681 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2682 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
2683 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
2684 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2685 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2687 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2689 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2690 %p9%t\E(0%e\E(B%;$<2>,
2691 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2692 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2693 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
2694 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
2696 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2697 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
2698 # We have to init 132-col mode, not 80-col mode.
2699 vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
2701 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
2702 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
2703 vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
2705 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
2706 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
2708 # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2709 # which are pretty much a superset of the VT320. They have the
2710 # host writable status line, yet another different DRCS matrix size,
2711 # and such, but they add the DEC Technical character set, Multiple text
2712 # pages, selectable length pages, and the like. The difference between
2713 # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2714 # monitor, the former has 4 planes and a color monitor. These terminals
2715 # support VT131 and ANSI block mode, but as with much of these things,
2716 # termcap/terminfo doesn't deal with these features.
2718 # Note that this entry is are set up in what was the standard way for GNU
2719 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2720 # keys were switched into application mode at the same time the numeric pad
2721 # is switched into application mode. This changes the definitions of the
2722 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2723 # your termcap or terminfo entry,
2725 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2726 # (vt340: string capability "sb=\E[M" corrected to "sr";
2727 # also, added <rmam>/<smam> based on the init string -- esr)
2728 vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2729 am, eslok, hs, mir, msgr, xenl, xon,
2730 cols#80, it#8, lines#24, vt#3,
2731 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2732 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2733 cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
2734 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
2735 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2736 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
2737 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
2738 ed=\E[J, el=\E[K, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
2739 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
2741 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2743 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2744 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2745 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2746 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
2747 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2748 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2749 rmul=\E[24m, rs1=\E[?3l, sc=\E7,
2750 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2751 %p9%t\E(0%e\E(B%;$<2>,
2752 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2753 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2754 tsl=\E[2$~\E[1$}\E[1;%dH,
2756 # Left/right margins are supported in xterm since patch #279 (2012/05/10)
2757 vt420+lrmm|VT420 left/right margins,
2758 mgc=\E[?69l, smglr=\E[?69h\E[%i%p1%d;%p2%ds,
2760 # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2761 # (originally written with vt420 as its primary name, and usable for it).
2763 # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2764 # text pages and long text pages with selectable length of the vt340, along
2765 # with left and right margins, rectangular area text copy, fill, and erase
2766 # operations, selected region character attribute change operations,
2767 # page memory and rectangle checksums, insert/delete column, reception
2768 # macros, and other features too numerous to remember right now. TERMCAP
2769 # can only take advantage of a few of these added features.
2771 # Note that this entry is are set up in what was the standard way for GNU
2772 # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2773 # keys were switched into application mode at the same time the numeric pad
2774 # is switched into application mode. This changes the definitions of the
2775 # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2776 # your termcap entry,
2778 # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2779 # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2780 # also, added <rmam>/<smam> based on the init string -- esr)
2781 vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2782 am, eslok, hs, mir, msgr, xenl, xon,
2783 cols#80, it#8, lines#24, vt#3,
2784 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2785 blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2786 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=\r,
2787 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2788 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2789 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2790 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2791 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
2792 el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
2793 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2794 il=\E[%p1%dL, il1=\E[L, ind=\ED,
2795 is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
2797 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2798 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2799 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2800 lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
2801 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
2802 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2803 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
2804 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2805 %p9%t\E(0%e\E(B%;$<2>,
2806 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
2807 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2808 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
2810 # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2811 # a missing <sc> -- esr)
2812 # add msgr and other capabilities from vt220 -TD
2814 am, mir, msgr, xenl, xon,
2815 cols#80, it#8, lines#24, vt#3,
2816 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2817 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
2818 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=\r,
2819 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2820 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
2821 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
2822 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2823 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
2824 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
2825 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
2826 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
2827 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2828 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
2829 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
2830 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
2831 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
2832 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2833 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2834 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2835 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2836 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
2837 %p9%t\E(0%e\E(B%;$<2>,
2838 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
2839 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
2840 use=ansi+pp, use=dec+sl, use=ansi+enq,
2842 # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2843 # takes two parameters, the key and the string. Translating the key is
2844 # straightforward (keys 1-5 are not defined on real terminals, though some
2845 # emulators define these):
2847 # if (key < 16) then value = key;
2848 # else if (key < 21) then value = key + 1;
2849 # else if (key < 25) then value = key + 2;
2850 # else if (key < 27) then value = key + 3;
2851 # else if (key < 30) then value = key + 4;
2852 # else value = key + 5;
2854 # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2855 # There's no provision in terminfo for emitting a string in this format, so the
2856 # application has to know it.
2858 vt420pc|DEC VT420 w/PC keyboard,
2859 kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2860 kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
2861 kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
2862 kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
2863 kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
2864 kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
2865 kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
2866 kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
2867 kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
2868 kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
2869 kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
2870 kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
2871 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2872 pctrm=USR_TERM\:vt420pcdos\:,
2873 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
2874 %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
2878 vt420pcdos|DEC VT420 w/PC for DOS Merge,
2880 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
2881 %{127}%=%t\E\177%e%p1%c%;,
2883 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2884 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
2886 vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2887 kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2888 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2889 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2890 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2891 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2892 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2897 vt510pc|DEC VT510 w/PC keyboard,
2899 vt510pcdos|DEC VT510 w/PC for DOS Merge,
2904 # The VT520 is a monochrome text terminal capable of managing up to
2905 # four independent sessions in the terminal. It has multiple ANSI
2906 # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2907 # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2908 # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2910 # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2911 # [Alt]/[Print Screen] depending upon which keyboard and which
2912 # terminal mode is being used. If Set-Up has been disabled or
2913 # assigned to an unknown key, Set-Up may be entered by pressing
2914 # [F3] as the first key after power up, regardless of keyboard type.
2916 use=ansi+rca, use=vt420, use=ansi+tabs,
2921 # I just got a brand new Boundless VT520 with that company's "ANSI 2011"
2922 # Keyboard, which replaces the old LK41R-AA keyboard.
2924 # In trying to get the function keys to work, I had to cobble my own
2925 # terminfo.src entry, since the existing vt520 entry doesn't include most of
2926 # the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
2927 # I seem to get them all -Mike Gran
2928 vt520ansi|Boundless VT520 ANSI,
2929 use=ansi+rca, use=vt420f, use=vt220+keypad,
2932 #### VT100 emulations
2934 # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2935 # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2936 # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2937 # that this works best with a stock vt100 entry.
2938 dec-vt100|EWAN telnet's vt100 emulation,
2941 # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
2942 dec-vt220|DOS tnvt200 terminal emulator,
2945 # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2946 # anyone who needs PC VT340 emulation. (or anything below that level, for
2947 # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2948 # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2949 # I can send the address if requested.
2950 # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
2951 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
2952 z340|zstem vt340 terminal emulator 132col 42line,
2954 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2955 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
2956 z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2958 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2959 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
2961 # expect-5.44.1.15/example/tkterm
2962 # a minimal subset of a vt100 (compare with "news-unk).
2964 # The missing "=" in smkx is not a typo (here), but an error in tkterm.
2965 tt|tkterm|Don Libes' tk text widget terminal emulator,
2966 clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
2967 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
2968 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2969 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
2976 # nsterm*|Apple_Terminal - AppKit Terminal.app
2978 # Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
2979 # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
2980 # Server and Mac OS X operating systems. There is also a
2981 # "terminal.app" in GNUstep, but I believe it to be an unrelated
2982 # codebase and I have not attempted to describe it here.
2984 # For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
2985 # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
2986 # You might also try "nsterm-7" and "nsterm-old" if you suspect your
2987 # version supports color.
2989 # To determine the version of Terminal.app you're using by running:
2991 # echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
2993 # For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
2995 # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
2997 # For Apple_Terminal v71+/v100+, use "nsterm-bce".
2999 # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
3001 # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
3003 # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
3004 # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
3005 # might work too, but really you're on your own here since these
3006 # systems are very obsolete and I can't test them. I do welcome
3007 # patches, though :).
3011 # For GNUstep_Terminal, you're probably best off using "linux" or
3012 # writing your own terminfo.
3014 # For MacTelnet, you're on your own. It's a different codebase, and
3015 # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
3017 # For iTerm.app, see "iterm".
3020 # The AppKit Terminal.app descriptions all have names beginning with
3021 # "nsterm". Note that the statusline (-s) versions use the window
3022 # titlebar as a phony status line, and may produce warnings during
3023 # compilation as a result ("tsl uses 0 parameters, expected 1".)
3024 # Ignore these warnings, or even ignore these entries entirely. Apps
3025 # which need to position the cursor or do other fancy stuff inside the
3026 # status line won't work with these entries. They're primarily useful
3027 # for programs like Pine which provide simple notifications in the
3028 # status line. Please note that non-ASCII characters don't work right
3029 # in the status line, since Terminal.app incorrectly interprets their
3030 # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
3031 # versions) or only accepts status lines consisting entirely of
3032 # characters from the first 256 Unicode positions (including C1 but
3035 # The Mythology* of AppKit Terminal.app:
3037 # In the days of NeXTSTEP 0.x and 1.x there were two incompatible
3038 # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
3039 # shareware replacement for Terminal called "Stuart" which NeXT bought
3040 # and used as the basis for the Terminal.app in NeXTSTEP 2+,
3041 # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
3042 # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
3043 # capabilities for the early versions, but I believe that the
3044 # TERM_PROGRAM_VERSION may have been reset at some point.
3046 # The early versions were tailored to the NeXT character set. Sometime
3047 # after the Apple acquisition the encoding was switched to MacRoman
3048 # (initially with serious altcharset bugs due to incomplete conversion
3049 # of the old NeXT code,) and then later to UTF-8. Also sometime during
3050 # or just prior to the early days of Mac OS X, the Terminal grew ANSI
3051 # 8-color support (initially buggy when combined with attributes, but
3052 # that was later fixed.) More recently, around Mac OS X version 10.3
3053 # or so (Terminal.app v100+) xterm-like 16-color support was added. In
3054 # some versions (for instance 133-1 which shipped with Mac OS X
3055 # version 10.4) this suffered from the <bce> bug, but that seems to
3056 # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
3058 # In the early days of Mac OS X the terminal was fairly buggy and
3059 # would routinely crash under load. Many of these bugs seem to have
3060 # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
3061 # some may still remain. This change seems to correspond to
3062 # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
3063 # it did previously.
3065 # * This may correspond with what actually happened, but I don't
3066 # know. It is based on guesswork, hearsay, private correspondence,
3067 # my faulty memory, and the following online sources and references:
3069 # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
3070 # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
3072 # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
3073 # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
3075 # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
3076 # "nsterm" to comply with the name length and case conventions and
3077 # limitations of various software packages [notably Solaris terminfo
3078 # and UNIX.] A single Apple_Terminal alias is retained for
3079 # backwards-compatibility.
3081 # * Added function key support (F1-F4). These only work in Terminal.app
3082 # version 51, hopefully the capabilities won't cause problems for people
3085 # * Added "full color" (-c) entries which support the 16-color mode in
3088 # * By default, version 51 uses UTF-8 encoding with broken altcharset
3089 # support, so "ASCII" (-7) entries without altcharset support were
3092 # nsterm - AppKit Terminal.app
3094 # Apple's Mac OS X includes a Terminal.app derived from the old NeXT
3095 # Terminal.app. It is a partial VT100 emulation with some xterm-like
3096 # extensions. This terminfo was written to describe versions 41
3097 # (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
3098 # version 10.1) of Terminal.app.
3100 # Terminal.app runs under the Mac OS X Quartz windowing system (and
3101 # other AppKit-supported windowing systems.) On the Mac OS X machine I
3102 # use, the executable for Terminal.app is:
3103 # /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
3105 # If you're looking for a description of the full-screen system
3106 # console which runs under Apple's Darwin operating system on PowerPC
3107 # platforms, see the "xnuppc" entry instead.
3109 # There were no function keys in version 41. In version 51, there are
3110 # four working function keys (F1, F2, F3 and F4.) The function keys
3111 # are included in all of these entries.
3113 # It does not support mouse pointer position reporting. Under some
3114 # circumstances the cursor can be positioned using option-click; this
3115 # works by comparing the cursor position and the selected position,
3116 # and simulating enough cursor-key presses to move the cursor to the
3117 # selected position. This technique fails in all but the simplest
3120 # It provides partial ANSI color support (background colors interacted
3121 # badly with bold in version 41, though, as reflected in :ncv:.) The
3122 # monochrome (-m) entries are useful if you've disabled color support
3123 # or use a monochrome monitor. The full color (-c) entries are useful
3124 # in version 51, which doesn't exhibit the background color bug. They
3125 # also enable an xterm-compatible 16-color mode.
3127 # The configurable titlebar is set using xterm-compatible sequences;
3128 # it is used as a status bar in the statusline (-s) entries. Its width
3129 # depends on font sizes and window sizes, but 50 characters seems to
3130 # be the default for an 80x24 window.
3132 # The MacRoman character encoding is used for some of the alternate
3133 # characters in the "MacRoman" entries; the "ASCII" (-7) entries
3134 # disable alternate character set support entirely, and the "VT100"
3135 # (-acs) entries rely instead on Terminal.app's own buggy VT100
3136 # graphics emulation, which seems to think the character encoding is
3137 # the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
3138 # are useful in Terminal.app version 51, which supports UTF-8 and
3139 # other ASCII-compatible character encodings but does not correctly
3140 # implement VT100 graphics; once VT100 graphics are correctly
3141 # implemented in Terminal.app, the "VT100" (-acs) entries should be
3142 # usable in any ASCII-compatible character encoding [except perhaps
3143 # in UTF-8, where some experts argue for disallowing alternate
3144 # characters entirely.]
3146 # Terminal.app reports "vt100" as the terminal type, but exports
3147 # several environment variables which may aid detection in a shell
3148 # profile (i.e. .profile or .login):
3151 # TERM_PROGRAM=Apple_Terminal
3152 # TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
3153 # TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
3155 # For example, the following Bourne shell script would detect the
3156 # correct terminal type:
3158 # if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
3161 # if [ :"$TERM_PROGRAM_VERSION" = :41 ]
3169 # In a C shell derivative, this would be accomplished by:
3171 # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
3172 # if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
3173 # if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
3174 # setenv TERM "nsterm-old"
3176 # setenv TERM "nsterm-c-7"
3181 # The '+' entries are building blocks
3182 nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
3183 am, bw, msgr, xenl, xon,
3184 cols#80, it#8, lines#24,
3185 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
3186 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3187 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3188 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3189 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
3190 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
3191 ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
3192 kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
3193 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3194 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3195 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3196 %p5%t;2%;%?%p7%t;8%;m,
3197 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3198 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
3200 nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
3201 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3202 enacs=\E(B\E)0, rmacs=^O,
3203 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3204 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3205 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3207 nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
3208 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i
3209 \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
3210 \271|\255}\243~\245,
3211 enacs=\E(B\E)0, rmacs=^O,
3212 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3213 %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
3214 sgr0=\E[m\017, smacs=^N, use=nsterm+7,
3216 # compare with xterm+sl-twm
3217 nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
3218 wsl#50, use=xterm+sl-twm,
3220 nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
3221 op=\E[0m, use=ibm+16color,
3223 nsterm+c41|AppKit Terminal.app v41 color support,
3224 colors#8, ncv#37, pairs#64,
3225 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3227 # These are different combinations of the building blocks
3229 # ASCII charset (-7)
3230 nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
3233 nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
3234 use=nsterm+s, use=nsterm+7,
3236 nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
3237 use=nsterm+c41, use=nsterm+7,
3239 nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
3240 use=nsterm+c, use=nsterm+7,
3242 nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
3243 use=nsterm+s, use=nsterm+c41, use=nsterm+7,
3245 nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
3246 use=nsterm+s, use=nsterm+c, use=nsterm+7,
3248 # VT100 alternate-charset (-acs)
3249 nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
3252 nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
3253 use=nsterm+s, use=nsterm+acs,
3255 nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
3256 use=nsterm+c41, use=nsterm+acs,
3258 nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
3259 use=nsterm+c, use=nsterm+acs,
3261 nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
3262 use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
3264 nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
3265 use=nsterm+s, use=nsterm+c, use=nsterm+acs,
3268 nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
3271 nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
3272 use=nsterm+s, use=nsterm+mac,
3274 nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
3275 use=nsterm+c41, use=nsterm+mac,
3277 nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
3278 use=nsterm+c, use=nsterm+mac,
3280 nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
3281 use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
3283 nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
3284 use=nsterm+s, use=nsterm+c, use=nsterm+mac,
3286 # In Mac OS X version 10.5 the format of the preferences has changed
3287 # and a new, more complex technique is needed, e.g.,
3289 # python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
3290 # "NSUserDefaults");ud=NSUserDefaults.alloc();
3291 # ud.init();prefs=ud.persistentDomainForName_(
3292 # "com.apple.Terminal");prefs["Window Settings"][
3293 # prefs["Default Window Settings"]]["TerminalType"
3294 # ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
3295 # "com.apple.Terminal")' nsterm-16color
3297 # and it is still not settable from the preferences dialog. This is
3298 # tracked under rdar://problem/7365108 and rdar://problem/7365134
3299 # in Apple's bug reporter.
3301 # In OS X 10.5 (Leopard) the TERM which can be set in the preferences dialog
3302 # defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
3303 # vt52, vt100, vt102 and xterm.
3304 nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
3306 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
3307 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
3308 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
3309 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
3310 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
3311 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
3312 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
3313 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
3314 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
3315 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
3317 # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
3318 # the background color erase feature. The newer version 240.2 in Mac OS X
3319 # version 10.5 does not.
3321 # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
3322 # and D P Schreber comparing to nsterm-c-s-acs.
3324 # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
3325 # can be set in Terminal.app, e.g.,
3327 # defaults write com.apple.Terminal TermCapString nsterm-bce
3329 # and that it is not set in Terminal's preferences dialog.
3331 # Modified for OS X 10.8, omitting bw based on testing with tack -TD
3334 # * The terminal description matches the default settings.
3335 # * The keyboard is configurable via a dialog.
3336 # * By default khome, kend, knext and kprev are honored only with a
3338 # * There are bindings for control left/right arrow (but not up/down).
3339 # Added those to nsterm-16color, which is the version used for OS X 10.6
3340 # * "Allow VT100 application keypage mode" is by default disabled.
3341 # There is no way to press keypad-comma unless application mode is enabled
3343 # * 132-column mode stopped working during vttest's tests. Consider it broken.
3344 # * CHT, REP, SU, SD are buggy.
3345 # * ECH works (also in Leopard), but is not used here for compatibility.
3346 # * The terminal preferences dialog replaces xterm-color by xterm-16color and
3347 # xterm-256color. However, it adds "nsterm", so it is possible to use the
3348 # nsterm entry from this file to override the MacPorts (20110404) or
3349 # system (20081102) copy of this file.
3350 # + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
3351 # dialog defaults to xterm-256color. Alternative selections are ansi,
3352 # dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
3353 # the menu says "Declare terminal as" without promising to actually emulate
3354 # the corresponding terminals. Indeed, changing TERM does not affect the
3355 # emulation itself. This means that
3356 # + the function-keys do not match for dtterm for kf1-kf4 as well as
3358 # + the color model is the same for each setting of TERM (does not match
3360 # + the shift/control/meta key modifiers from rxvt and xterm variants are not
3361 # recognised except for a few special cases, i.e., kRIT5 and kLFT5.
3362 # + the vt52 emulation does not give a usable shell because screen-clearing
3363 # does not work as expected.
3364 # + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
3365 # + OSX 10.9 (Yosemite) added more extended keys in the default configuration
3366 # as well as unmasking F10 (which had been used in the window manager). Those
3367 # keys are listed in this entry.
3368 nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
3369 bce, use=nsterm-16color,
3371 # This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
3372 # TERM_PROGRAM_VERSION=309
3373 # Earlier reports state that these differences also apply to OS X 10.7 (Lion),
3374 # TERM_PROGRAM_VERSION=303
3375 nsterm-build309|Terminal.app in OS X 10.8,
3376 use=xterm+256setaf, use=nsterm-bce,
3378 # removed bogus kDC7 -TD
3379 nsterm-build326|Terminal.app in OS X 10.9,
3380 kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
3381 kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
3382 kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-build309,
3385 nsterm-build343|Terminal.app in OS X 10.10,
3386 kend=\EOF, khome=\EOH, use=nsterm-build326,
3388 # reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
3390 # + no vt52 mode for cursor keys, though vt52 screen works in vttest
3391 # + f1-f4 map to pf1-pf4
3392 # + no vt220 support aside from DECTCEM and ECH
3393 # + there are no protected areas. Forget about anything above vt220.
3394 # + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
3395 # + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
3396 # + but bce fails for 11.6.7.2 (test repeat).
3397 # + SD (11.6.7.3) also fails, but SL/SR/SU work.
3398 # + 11.6.6 (test insert/delete char/line with bce) has several failures.
3399 # + normal (not X10 or Highlight tracking) mouse now works.
3400 # + mouse any-event works
3401 # + mouse button-event works
3402 # + in alternate screen:
3404 # mode 1047 fails to restore cursor position (do not use)
3405 # mode 1049 fails to restore screen contents (do not use)
3406 # + dtterm window-modify operations work (some messages are not printed)
3407 # + dtterm window-report gives size of window in characters/pixels as
3408 # well as state of window.
3410 # + there is no difference between cnorm/cvvis
3411 # + has dim/invis/blink (no protect of course)
3412 # + most function keys with shift/control modifiers give beep
3413 # (user can configure, but out-of-the-box is what I record)
3414 # + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
3416 # + kLFT5/kRIT5 work, but not up/down with control-modifier
3417 # + kLFT/kRIT work, but not up/down with shift-modifier
3418 # + there are a few predefined bindings with Alt, but no clear pattern.
3419 # + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
3420 # Using ncurses test-program with xterm-new:
3422 # Using xterm's scripts:
3423 # + palette for 256-colors is hardcoded.
3424 # + no support for "dynamic colors"
3425 # + no support for tcap-query.
3426 nsterm-build361|Terminal.app in OS X 10.11,
3428 kmous=\E[M, use=nsterm-build343,
3430 # reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
3431 # Comparing with build361, little has changed, except that italics work.
3432 # Direct-color is not supported, by the way.
3434 # Improved rmso/rmul -TD
3435 nsterm-build400|Terminal.app in OS X 10.13,
3436 rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
3437 use=ecma+italics, use=nsterm-build361,
3439 # This is an alias which should always point to the "current" version
3440 nsterm|nsterm-256color|Apple_Terminal|AppKit Terminal.app,
3441 use=nsterm-build400,
3447 # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more
3448 # featureful) terminal emulator for Mac OS X. It is similar enough in
3449 # capabilities to nsterm-16color that I have derived this description from that
3450 # one, but as far as I know they share no code. Many of the features are
3451 # user-configurable, but I attempt only to describe the default configuration
3454 # According to its documentation, iTerm uses terminfo to obtain function key
3455 # definitions. For example, if it is started with TERM=xterm, it uses key
3456 # definitions from that terminal description from the local OSX machine. Those
3457 # $TERM settings may be augmented using the bookmark and profile dialogs.
3458 # However, the behavior seen with tack does not agree with either the terminfo
3459 # description or the function keys in its "xterm" profile.
3463 # reports primary DA as VT100 with AVO: \E[?1;2c
3464 # reports secondary DA as "\E[>0;95;c"
3465 # supports blink and underline
3466 # displays bold text as red
3467 # recognizes all dtterm controls for modifying/querying window
3468 # resizing via escape sequence is very slow
3469 # supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking)
3470 # supports X11R5 alternate screen and XFree86 1049 (no 1047/1048)
3471 # supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA
3474 # with ncurses test-program:
3475 # ncurses 'k' has problem in second screen; light background does not fill
3476 # with xterm scripts
3477 # can display/alter xterm-256color cube
3478 # can display/alter xterm-88color cube
3479 iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
3480 am, bce, hs, mir, msgr, npc, xenl, xon,
3481 cols#80, it#8, lines#24, wsl#50,
3482 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3483 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3484 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
3485 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3486 cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
3487 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3488 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3489 el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3490 flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
3491 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
3492 il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?,
3493 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3494 kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
3495 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3496 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3497 khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8,
3498 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
3499 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
3500 rmso=\E[m, rmul=\E[m,
3501 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3502 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
3504 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
3505 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3506 tbc=\E[3g, vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
3507 use=ansi+enq, use=xterm+sl-twm, use=vt100+keypad,
3508 use=xterm+x11mouse, use=xterm+256setaf,
3512 # https://www.iterm2.com/
3513 # https://github.com/gnachman/iTerm2
3514 # ~/Library/Preferences/com.googlecode.iterm2.plist
3515 # "iTerm" stalled in 2009. A different set of developers began "iTerm2".
3519 # reports primary DA as VT100 with AVO: \E[?1;2c
3520 # reports secondary DA as "\E[>0;95;0c"
3521 # numeric keypad application mode does not work
3522 # by default, dtterm window-modifications are ignored
3523 # by default, dtterm window-reports return, but icon as "L", window as "l"
3524 # supports SD/SU, no REP, SL, SR
3525 # supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR)
3526 # no improvement to XFree86 1047/1048 modes
3528 # in meta-mode, imitates xterm, sending UTF-8
3529 # special-key modifiers based on xterm use incompatible default for alt/meta
3530 # with ncurses test-program:
3532 # no improvement to ncurses 'k'
3533 # with xterm scripts:
3536 # Italic text did not work initially, apparently because upgrading did not
3537 # add/change that preference (set in Preferences, Profiles, Text). A new
3538 # install of iTerm 3.0.15 provides italics by default (blinking text is an
3539 # option in the preferences dialog).
3541 # 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5
3542 # 2018/05/19: xterm+sm+1006 seems to work with 3.1.6beta -TD
3543 iTerm2.app|iterm2|terminal emulator for Mac OS X,
3544 blink=\E[5m, cbt=\E[Z, dim=\E[2m, kEND=\E[1;2F,
3545 kHOM=\E[1;2H, ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf13=\E[1;2P,
3546 kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~,
3547 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~,
3548 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
3549 kf24=\E[24;2~, kind=\E[1;2B, kri=\E[1;2A, nel=\EE,
3550 op=\E[39;49m, rmso=\E[27m, rmul=\E[24m,
3551 rs2=\E[!p\E[?3;4l\E[4l\E>\E[?1000l,
3552 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
3553 %p5%t;2%;m%?%p9%t\016%e\017%;,
3554 kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B,
3555 kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F,
3556 kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H,
3557 kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H,
3558 kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D,
3559 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~,
3560 kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C,
3561 kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A,
3562 kUP5=\E[1;5A, kUP6=\E[1;6A, use=ecma+index,
3563 use=xterm+alt+title, use=ecma+italics, use=iterm,
3565 # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
3567 # On PowerPC platforms, Apple's Darwin operating system uses a
3568 # full-screen system console derived from a NetBSD framebuffer
3569 # console. It is an ANSI-style terminal, and is not really VT-100
3572 # Under Mac OS X, this is the system console driver used while in
3573 # single-user mode [reachable by holding down Command-S during the
3574 # boot process] and when logged in using console mode [reachable by
3575 # typing ">console" at the graphical login prompt.]
3577 # If you're looking for a description of the Terminal.app terminal
3578 # emulator which runs under the Mac OS X Quartz windowing system (and
3579 # other AppKit-supported windowing systems,) see the "nsterm"
3582 # NOTE: Under Mac OS X version 10.1, the default login window does not
3583 # prompt for user name, instead requiring an icon to be selected from
3584 # a list of known users. Since the special ">console" login is not in
3585 # this list, you must make one of two changes in the Login Window
3586 # panel of the Login section of System Prefs to make the special
3587 # ">console" login accessible. The first option is to enable 'Show
3588 # "Other User" in list for network users', which will add a special
3589 # "Other..." icon to the graphical login panel. Selecting "Other..."
3590 # will present the regular graphical login prompt. The second option
3591 # is to change the 'Display Login Window as:' setting to 'Name and
3592 # password entry fields', which replaces the login panel with a
3593 # graphical login prompt.
3595 # There are no function keys, at least not in Darwin 1.3.
3597 # It has no mouse support.
3599 # It has full ANSI color support, and color combines correctly with
3600 # all three supported attributes: bold, inverse-video and underline.
3601 # However, bold colored text is almost unreadable (bolding is
3602 # accomplished using shifting and or-ing, and looks smeared) so bold
3603 # has been excluded from the list of color-compatible attributes
3604 # [using (ncv)]. The monochrome entry (-m) is useful if you use a
3605 # monochrome monitor.
3607 # There is one serious bug with this terminal emulation's color
3608 # support: repositioning the cursor onto a cell with non-matching
3609 # colors obliterates that cell's contents, replacing it with a blank
3610 # and displaying a colored cursor in the "current" colors. There is
3611 # no complete workaround at present [other than using the monochrome
3612 # (-m) entries,] but removing the (msgr) capability seemed to help.
3614 # The "standout" chosen was simple reverse-video, although a colorful
3615 # standout might be more aesthetically pleasing. Similarly, the bold
3616 # chosen is the terminal's own smeared bold, although a simple
3617 # color-change might be more readable. The color-bold (-b) entries
3618 # uses magenta colored text for bolding instead. The fancy color (-f
3619 # and -f2) entries use color for bold, standout and underlined text
3620 # (underlined text is still underlined, though.)
3622 # Apparently the terminal emulator does support a VT-100-style
3623 # alternate character set, but all the alternate character set
3624 # positions have been left blank in the font. For this reason, no
3625 # alternate character set capabilities have been included in this
3626 # description. The console driver appears to be ASCII-only, so (enacs)
3627 # has been excluded [although the VT-100 sequence does work.]
3629 # The default Mac OS X and Darwin installation reports "vt100" as the
3630 # terminal type, and exports no helpful environment variables. To fix
3631 # this, change the "console" entry in /etc/ttys from "vt100" to
3632 # "xnuppc-WxH", where W and H are the character dimensions of your
3633 # console (see below.)
3635 # The font used by the terminal emulator is apparently one originally
3636 # drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
3637 # file includes descriptions for the following geometries:
3639 # Pixels Characters Entry Name (append -m for monochrome)
3640 # -------------------------------------------------------------------
3641 # 640x400 80x25 xnuppc-80x25
3642 # 640x480 80x30 xnuppc-80x30
3643 # 720x480 90x30 xnuppc-90x30
3644 # 800x600 100x37 xnuppc-100x37
3645 # 896x600 112x37 xnuppc-112x37
3646 # 1024x640 128x40 xnuppc-128x40
3647 # 1024x768 128x48 xnuppc-128x48
3648 # 1152x768 144x48 xnuppc-144x48
3649 # 1280x1024 160x64 xnuppc-160x64
3650 # 1600x1024 200x64 xnuppc-200x64
3651 # 1600x1200 200x75 xnuppc-200x75
3652 # 2048x1536 256x96 xnuppc-256x96
3654 # The basic "xnuppc" entry includes no size information, and the
3655 # emulator includes no reporting capability, so you'll be at the mercy
3656 # of the TTY device (which reports incorrectly on my hardware.) The
3657 # color-bold entries do not include size information.
3659 # The '+' entries are building blocks
3660 xnuppc+basic|Darwin PowerPC Console basic capabilities,
3663 bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
3664 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
3665 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
3666 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
3667 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?,
3668 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
3669 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
3670 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3672 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3673 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
3674 smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
3676 xnuppc+c|Darwin PowerPC Console ANSI color support,
3677 colors#8, ncv#32, pairs#64,
3678 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3680 xnuppc+b|Darwin PowerPC Console color-bold support,
3683 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3686 xnuppc+f|Darwin PowerPC Console fancy color support,
3688 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
3690 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
3692 xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
3695 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
3696 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
3698 # Building blocks for specific screen sizes
3699 xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
3702 xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
3705 xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
3708 xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
3711 xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
3714 xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
3717 xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
3720 xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
3723 xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
3726 xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
3729 xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
3732 xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
3733 cols#0x100, lines#96,
3735 # These are different combinations of the building blocks
3737 xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
3740 xnuppc|darwin|Darwin PowerPC Console (color),
3741 use=xnuppc+c, use=xnuppc+basic,
3743 xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
3746 xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
3747 use=xnuppc+b, use=xnuppc+c,
3749 xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
3752 xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
3753 use=xnuppc+f, use=xnuppc+c,
3755 xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
3758 xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
3759 use=xnuppc+f2, use=xnuppc+c,
3761 # Combinations for specific screen sizes
3762 xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
3763 use=xnuppc+80x25, use=xnuppc+basic,
3765 xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
3766 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
3768 xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
3769 use=xnuppc+80x30, use=xnuppc+basic,
3771 xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
3772 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
3774 xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
3775 use=xnuppc+90x30, use=xnuppc+basic,
3777 xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
3778 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
3780 xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
3781 use=xnuppc+100x37, use=xnuppc+basic,
3783 xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
3784 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
3786 xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
3787 use=xnuppc+112x37, use=xnuppc+basic,
3789 xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
3790 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
3792 xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
3793 use=xnuppc+128x40, use=xnuppc+basic,
3795 xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
3796 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
3798 xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
3799 use=xnuppc+128x48, use=xnuppc+basic,
3801 xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
3802 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
3804 xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
3805 use=xnuppc+144x48, use=xnuppc+basic,
3807 xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
3808 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
3810 xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
3811 use=xnuppc+160x64, use=xnuppc+basic,
3813 xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
3814 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
3816 xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
3817 use=xnuppc+200x64, use=xnuppc+basic,
3819 xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
3820 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
3822 xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
3823 use=xnuppc+200x75, use=xnuppc+basic,
3825 xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
3826 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
3828 xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
3829 use=xnuppc+256x96, use=xnuppc+basic,
3831 xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
3832 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
3834 ######## DOS/WINDOWS
3835 # CRT is shareware. It implements some xterm features, including mouse.
3836 crt|crt-vt220|CRT 2.3 emulating VT220,
3839 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
3842 # PuTTY 0.55 (released 3 August 2004)
3843 # http://www.chiark.greenend.org.uk/~sgtatham/putty/
3845 # Comparing with 0.51, vttest is much better (only a few problems with the
3846 # cursor position reports and wrapping).
3848 # PuTTY 0.51 (released 14 December 2000)
3850 # This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
3851 # well as SCO and Atari, color palettes from Linux console). Reading the code,
3852 # it is intended to be VT102 plus selected features. By default, it sets $TERM
3853 # to xterm, which is incorrect, since several features are misimplemented:
3855 # Alt+key always sends ESC+key, so 'km' capability is removed.
3857 # Control responses, wrapping and tabs are buggy, failing a couple of
3858 # screens in vttest.
3860 # xterm mouse support is not implemented (unrelease version may).
3862 # Several features such as backspace/delete are optional; this entry documents
3863 # the default behavior -TD
3865 # PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
3866 # but implements it incorrectly as mentioned here:
3867 # http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114
3868 # PuTTY recognized xterm's 1006 mode since late 2015; subsequent release was
3869 # in 2017 (0.70) -TD
3870 putty|PuTTY terminal emulator,
3871 am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
3872 colors#8, it#8, ncv#22, pairs#64, U8#1,
3873 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3874 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
3875 clear=\E[H\E[J, cnorm=\E[?25h, cr=\r,
3876 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3877 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
3878 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3879 dch=\E[%p1%dP, dch1=\E[P,
3880 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
3881 \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
3882 %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
3883 \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
3884 %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
3885 %%G\340\202\242\E%%@%e%p1%c%;,
3886 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
3887 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
3888 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL,
3890 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
3891 %02x%p4%{255}%*%{1000}%/%02x,
3892 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
3893 kLFT=\E[D, kRIT=\E[C, kb2=\E[G, kbs=^?, kcbt=\E[Z,
3894 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3895 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
3896 kind=\E[B, knp=\E[6~, kpp=\E[5~, kri=\E[A, kspd=^Z, nel=\r\n,
3897 oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
3898 rmam=\E[?7l, rmcup=\E[2J\E[?47l, rmir=\E[4l,
3899 rmkx=\E[?1l\E>, rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m,
3900 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
3901 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
3902 setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
3903 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
3904 %;m%?%p9%t\016%e\017%;,
3905 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
3906 smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
3907 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J,
3908 use=ecma+index, use=xterm+sm+1006, use=putty+fnkeys,
3909 use=vt102+enq, use=xterm+sl,
3910 vt100-putty|Reset PuTTY to pure vt100,
3911 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
3913 putty-256color|PuTTY 0.58 with xterm 256-colors,
3914 use=xterm+256setaf, use=putty,
3915 putty-noapp|putty with cursor keys in normal mode,
3916 kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3917 kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
3920 # One of the keyboard selections is "VT100+".
3921 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
3922 putty-vt100|VT100+ keyboard layout,
3923 use=putty+fnkeys+vt100, use=putty,
3925 putty-sco|putty with SCO function keys,
3926 use=putty+fnkeys+sco, use=putty,
3928 # PuTTY has more than one section in its Keyboard configuration:
3929 # a) backspace/delete, which we ignore since that choice largely depends on
3930 # whether one matches Unix and BSD or Linux.
3931 # b) home/end keys, also ignored because the "rxvt" setting sends keys which
3932 # are unrelated to rxvt's actual settings.
3933 # c) function keys and keypad - this is the interesting part. None of the
3934 # selections match any of their respective namesakes, but they are shown
3935 # here to help users who expect that the selections do what is implied.
3937 # This is the default setting for PuTTY
3938 putty+fnkeys|fn-keys for PuTTY,
3939 use=putty+fnkeys+esc,
3941 putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
3942 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3943 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3944 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
3945 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
3946 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3948 putty+fnkeys+linux|Linux fn-keys for PuTTY,
3949 kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
3950 use=putty+fnkeys+esc,
3952 putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
3953 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
3954 use=putty+fnkeys+esc,
3956 putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
3957 use=putty+fnkeys+esc,
3959 # Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
3961 putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
3962 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
3963 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
3964 kf9=\EOX, use=putty+fnkeys+esc,
3966 # Unlike xterm-sco, this leaves kmous ambiguous with kf1.
3968 # Use modifiers to obtain function keys past 12:
3971 # F25-F36 - control/alt
3972 # F37-F48 - control/shift
3974 putty+fnkeys+sco|SCO fn-keys for PuTTY,
3975 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3976 kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
3977 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
3978 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
3979 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
3980 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
3981 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
3982 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
3983 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
3984 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
3985 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
3986 kich1=\E[L, knp=\E[G, kpp=\E[I,
3989 # https://github.com/mintty/mintty
3991 # Originally a fork (and reduction) of PuTTY, this has grown from 15ksloc in
3992 # 2013 to 38ksloc in 2019. That is still smaller than PuTTY (160ksloc), but
3993 # larger than rxvt (31ksloc).
3995 # Version 3.0 responds to DA as a VT400, however it does not implement the
3996 # application keypad. The assignment of cursor-keys versus modifiers differs
3997 # from xterm (alt-left and alt-right send modifier 7, i.e., alt+control).
3999 # Thomas Wolff suggested these extensions:
4000 # blink2 turn on rapid blinking
4001 # blink0 turn off blinking
4002 # norm turn off bold and half-bright mode
4003 # opaq turn off blank mode
4004 # smul2 begin double underline mode
4005 # smol begin overline mode
4006 # rmol exit overline mode
4007 # Font0 use default font
4008 # Font1 use alternative font 1
4010 # Font10 use alternative font 10
4011 # setal set (under)line color
4012 # ol set default (under)line color
4013 # overs overstrike (print characters over each other)
4015 # but see vte-2018 (use Smol/Rmol rather than smol/rmol).
4016 mintty|Cygwin Terminal,
4017 setal=\E[5%p1%dm, use=xterm+256color,
4019 mintty-direct|Cygwin Terminal direct-color,
4020 setal=\E[%?%p1%{8}%<%t5%p1%d%e58\:2\:\:%p1%{65536}%/%d\:%p1
4021 %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
4022 use=xterm+direct, use=mintty+common,
4023 mintty+common|shared capabilities for mintty,
4025 kcbt=\E[Z, kent=\EOM, rmm@, rmpch=\E[10m,
4026 rs1=\Ec\E]104\007, rshm=\E[22m, rsubm=\E[75m,
4027 rsupm=\E[75m, smm@, smpch=\E[11m, sshm=\E[1\:2m,
4028 ssubm=\E[74m, ssupm=\E[73m, Rmol=\E[55m, Smol=\E[53m,
4029 Smulx=\E[4\:%p1%dm, blink2=\E[6m, norm=\E[22m,
4030 opaq=\E[28m, smul2=\E[21m, use=ansi+rep,
4031 use=ecma+strikeout, use=ecma+index, use=vt420+lrmm,
4032 use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
4034 # 2019-06-09: These capabilities are commented-out for compatibility with
4035 # existing releases 5.9-6.1, and may be considered for inclusion after the
4036 # release of ncurses 6.2:
4054 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
4055 # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
4056 # (communication program) which supports:
4058 # - Serial port connections.
4059 # - TCP/IP (telnet) connections.
4060 # - VT100 emulation, and selected VT200/300 emulation.
4061 # - TEK4010 emulation.
4062 # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
4064 # - Scripts using the "Tera Term Language".
4065 # - Japanese and Russian character sets.
4067 # The program does not come with terminfo or termcap entries. However, the
4068 # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
4069 # vt52 or doublesize character support; blinking is done with color). Besides
4070 # the HPA, VPA extensions it also implements CPL and CNL.
4072 # All of the function keys can be remapped. This description shows the default
4073 # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
4074 # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
4075 # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
4083 # ANSI colors are implemented, but cannot be combined with video attributes
4084 # except for reverse.
4086 # No fonts are supplied with the program, so the acsc string is chosen to
4087 # correspond with the default Microsoft terminal font.
4089 # Tera Term recognizes some xterm sequences, including those for setting and
4090 # retrieving the window title, and for setting the window size (i.e., using
4091 # "resize -s"), though it does not pass SIGWINCH to the application if the
4092 # user resizes the window with the mouse.
4093 teraterm2.3|Tera Term Pro,
4096 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
4097 \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
4098 \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
4099 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
4100 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
4101 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
4102 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
4103 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
4104 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
4105 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
4106 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
4107 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
4108 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
4109 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
4110 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
4111 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
4112 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
4113 use=klone+color, use=vt100,
4115 # Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
4116 # to choose a Windows OEM font).
4118 # Testing with tack:
4119 # - it does not have xenl (suppress that)
4120 # - underline seems to work with color (modify ncv).
4121 # Testing with vttest:
4122 # - wrapping differs from vt100 (menu 1).
4123 # - it recognizes xterm's X10 and normal mouse tracking, but none of the
4125 # - it recognizes the dtterm window controls for reporting size in
4126 # characters and pixels.
4127 # - it passes SIGWINCH.
4128 teraterm4.59|Tera Term Pro,
4131 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
4132 kmous=\E[M, use=teraterm2.3,
4136 # Testing with tack:
4137 # - no bell (flash works)
4138 # - bold is yellow, blink is red.
4139 # - default keyboard sends ^? for Delete, can be configured for kdch1
4141 # Testing with vttest:
4142 # + autowrap has problems...
4143 # + color-tests for bce feature match xterm's behavior
4144 # + handles most of xterm's mouse-controls other than highlight-tracking.
4145 # xterm's SGR 1006 works.
4146 # + partial support for DEC locator-events
4147 # + implements ECMA-48 SD/SU, but not REP, SL/SR.
4148 # + has a "Tek" window, but does not work with vttest's examples
4149 # + supports the dtterm window modify/report controls