1 /****************************************************************************
2 * Copyright (c) 1998-2011,2012 Free Software Foundation, Inc. *
4 * Permission is hereby granted, free of charge, to any person obtaining a *
5 * copy of this software and associated documentation files (the *
6 * "Software"), to deal in the Software without restriction, including *
7 * without limitation the rights to use, copy, modify, merge, publish, *
8 * distribute, distribute with modifications, sublicense, and/or sell *
9 * copies of the Software, and to permit persons to whom the Software is *
10 * furnished to do so, subject to the following conditions: *
12 * The above copyright notice and this permission notice shall be included *
13 * in all copies or substantial portions of the Software. *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS *
16 * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF *
17 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. *
18 * IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, *
19 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR *
20 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR *
21 * THE USE OR OTHER DEALINGS IN THE SOFTWARE. *
23 * Except as contained in this notice, the name(s) of the above copyright *
24 * holders shall not be used in advertising or otherwise to promote the *
25 * sale, use or other dealings in this Software without prior written *
27 ****************************************************************************/
29 /****************************************************************************
30 * Author: Zeyd M. Ben-Halim <zmbenhal@netcom.com> 1992,1995 *
31 * and: Eric S. Raymond <esr@snark.thyrsus.com> *
32 * and: Thomas E. Dickey 1996-on *
33 * and: Juergen Pfeifer 2009 *
34 ****************************************************************************/
39 ** The routines for moving the physical cursor and scrolling:
41 ** void _nc_mvcur_init(void)
43 ** void _nc_mvcur_resume(void)
45 ** int mvcur(int old_y, int old_x, int new_y, int new_x)
47 ** void _nc_mvcur_wrap(void)
49 ** Comparisons with older movement optimizers:
50 ** SVr3 curses mvcur() can't use cursor_to_ll or auto_left_margin.
51 ** 4.4BSD curses can't use cuu/cud/cuf/cub/hpa/vpa/tab/cbt for local
52 ** motions. It doesn't use tactics based on auto_left_margin. Weirdly
53 ** enough, it doesn't use its own hardware-scrolling routine to scroll up
54 ** destination lines for out-of-bounds addresses!
55 ** old ncurses optimizer: less accurate cost computations (in fact,
56 ** it was broken and had to be commented out!).
58 ** Compile with -DMAIN to build an interactive tester/timer for the movement
59 ** optimizer. You can use it to investigate the optimizer's behavior.
60 ** You can also use it for tuning the formulas used to determine whether
61 ** or not full optimization is attempted.
63 ** This code has a nasty tendency to find bugs in terminfo entries, because it
64 ** exercises the non-cup movement capabilities heavily. If you think you've
65 ** found a bug, try deleting subsets of the following capabilities (arranged
66 ** in decreasing order of suspiciousness): it, tab, cbt, hpa, vpa, cuu, cud,
67 ** cuf, cub, cuu1, cud1, cuf1, cub1. It may be that one or more are wrong.
69 ** Note: you should expect this code to look like a resource hog in a profile.
70 ** That's because it does a lot of I/O, through the tputs() calls. The I/O
71 ** cost swamps the computation overhead (and as machines get faster, this
72 ** will become even more true). Comments in the test exerciser at the end
73 ** go into detail about tuning and how you can gauge the optimizer's
77 /****************************************************************************
79 * Constants and macros for optimizer tuning.
81 ****************************************************************************/
84 * The average overhead of a full optimization computation in character
85 * transmission times. If it's too high, the algorithm will be a bit
86 * over-biased toward using cup rather than local motions; if it's too
87 * low, the algorithm may spend more time than is strictly optimal
88 * looking for non-cup motions. Profile the optimizer using the `t'
89 * command of the exerciser (see below), and round to the nearest integer.
91 * Yes, I (esr) thought about computing expected overhead dynamically, say
92 * by derivation from a running average of optimizer times. But the
93 * whole point of this optimization is to *decrease* the frequency of
96 #define COMPUTE_OVERHEAD 1 /* I use a 90MHz Pentium @ 9.6Kbps */
99 * LONG_DIST is the distance we consider to be just as costly to move over as a
100 * cup sequence is to emit. In other words, it's the length of a cup sequence
101 * adjusted for average computation overhead. The magic number is the length
102 * of "\033[yy;xxH", the typical cup sequence these days.
104 #define LONG_DIST (8 - COMPUTE_OVERHEAD)
107 * Tell whether a motion is optimizable by local motions. Needs to be cheap to
108 * compute. In general, all the fast moves go to either the right or left edge
109 * of the screen. So any motion to a location that is (a) further away than
110 * LONG_DIST and (b) further inward from the right or left edge than LONG_DIST,
111 * we'll consider nonlocal.
113 #define NOT_LOCAL(sp, fy, fx, ty, tx) ((tx > LONG_DIST) \
114 && (tx < screen_columns(sp) - 1 - LONG_DIST) \
115 && (abs(ty-fy) + abs(tx-fx) > LONG_DIST))
117 /****************************************************************************
119 * External interfaces
121 ****************************************************************************/
124 * For this code to work OK, the following components must live in the
127 * int _char_padding; // cost of character put
128 * int _cr_cost; // cost of (carriage_return)
129 * int _cup_cost; // cost of (cursor_address)
130 * int _home_cost; // cost of (cursor_home)
131 * int _ll_cost; // cost of (cursor_to_ll)
133 * int _ht_cost; // cost of (tab)
134 * int _cbt_cost; // cost of (back_tab)
135 *#endif USE_HARD_TABS
136 * int _cub1_cost; // cost of (cursor_left)
137 * int _cuf1_cost; // cost of (cursor_right)
138 * int _cud1_cost; // cost of (cursor_down)
139 * int _cuu1_cost; // cost of (cursor_up)
140 * int _cub_cost; // cost of (parm_cursor_left)
141 * int _cuf_cost; // cost of (parm_cursor_right)
142 * int _cud_cost; // cost of (parm_cursor_down)
143 * int _cuu_cost; // cost of (parm_cursor_up)
144 * int _hpa_cost; // cost of (column_address)
145 * int _vpa_cost; // cost of (row_address)
146 * int _ech_cost; // cost of (erase_chars)
147 * int _rep_cost; // cost of (repeat_char)
149 * The USE_HARD_TABS switch controls whether it is reliable to use tab/backtabs
150 * for local motions. On many systems, it's not, due to uncertainties about
151 * tab delays and whether or not tabs will be expanded in raw mode. If you
152 * have parm_right_cursor, tab motions don't win you a lot anyhow.
155 #include <curses.priv.h>
159 #define CUR SP_TERMTYPE
162 MODULE_ID("$Id: lib_mvcur.c,v 1.128 2012/12/15 20:59:27 tom Exp $")
164 #define WANT_CHAR(sp, y, x) NewScreen(sp)->_line[y].text[x] /* desired state */
167 #define BAUDRATE(sp) sp->_term->_baudrate /* bits per second */
169 #define BAUDRATE(sp) cur_term->_baudrate /* bits per second */
172 #if defined(MAIN) || defined(NCURSES_TEST)
173 #include <sys/time.h>
175 static bool profiling = FALSE;
181 static int normalized_cost(NCURSES_SP_DCLx const char *const cap, int affcnt);
183 /****************************************************************************
185 * Initialization/wrapup (including cost pre-computation)
187 ****************************************************************************/
191 trace_cost_of(NCURSES_SP_DCLx const char *capname, const char *cap, int affcnt)
193 int result = NCURSES_SP_NAME(_nc_msec_cost) (NCURSES_SP_ARGx cap, affcnt);
194 TR(TRACE_CHARPUT | TRACE_MOVE,
195 ("CostOf %s %d %s", capname, result, _nc_visbuf(cap)));
198 #define CostOf(cap,affcnt) trace_cost_of(NCURSES_SP_ARGx #cap, cap, affcnt)
201 trace_normalized_cost(NCURSES_SP_DCLx const char *capname, const char *cap, int affcnt)
203 int result = normalized_cost(NCURSES_SP_ARGx cap, affcnt);
204 TR(TRACE_CHARPUT | TRACE_MOVE,
205 ("NormalizedCost %s %d %s", capname, result, _nc_visbuf(cap)));
208 #define NormalizedCost(cap,affcnt) trace_normalized_cost(NCURSES_SP_ARGx #cap, cap, affcnt)
212 #define CostOf(cap,affcnt) NCURSES_SP_NAME(_nc_msec_cost)(NCURSES_SP_ARGx cap, affcnt)
213 #define NormalizedCost(cap,affcnt) normalized_cost(NCURSES_SP_ARGx cap, affcnt)
218 NCURSES_SP_NAME(_nc_msec_cost) (NCURSES_SP_DCLx const char *const cap, int affcnt)
219 /* compute the cost of a given operation */
225 float cum_cost = 0.0;
227 for (cp = cap; *cp; cp++) {
228 /* extract padding, either mandatory or required */
229 if (cp[0] == '$' && cp[1] == '<' && strchr(cp, '>')) {
232 for (cp += 2; *cp != '>'; cp++) {
233 if (isdigit(UChar(*cp)))
234 number = number * 10 + (float) (*cp - '0');
236 number *= (float) affcnt;
237 else if (*cp == '.' && (*++cp != '>') && isdigit(UChar(*cp)))
238 number += (float) ((*cp - '0') / 10.0);
241 #if NCURSES_NO_PADDING
242 if (!GetNoPadding(SP_PARM))
244 cum_cost += number * 10;
245 } else if (SP_PARM) {
246 cum_cost += (float) SP_PARM->_char_padding;
250 return ((int) cum_cost);
256 _nc_msec_cost(const char *const cap, int affcnt)
258 return NCURSES_SP_NAME(_nc_msec_cost) (CURRENT_SCREEN, cap, affcnt);
263 normalized_cost(NCURSES_SP_DCLx const char *const cap, int affcnt)
264 /* compute the effective character-count for an operation (round up) */
266 int cost = NCURSES_SP_NAME(_nc_msec_cost) (NCURSES_SP_ARGx cap, affcnt);
267 if (cost != INFINITY)
268 cost = (cost + SP_PARM->_char_padding - 1) / SP_PARM->_char_padding;
273 reset_scroll_region(NCURSES_SP_DCL0)
274 /* Set the scroll-region to a known state (the default) */
276 if (change_scroll_region) {
277 NCURSES_SP_NAME(_nc_putp) (NCURSES_SP_ARGx
278 "change_scroll_region",
279 TPARM_2(change_scroll_region,
280 0, screen_lines(SP_PARM) - 1));
285 NCURSES_SP_NAME(_nc_mvcur_resume) (NCURSES_SP_DCL0)
286 /* what to do at initialization time and after each shellout */
288 if (!SP_PARM || !IsTermInfo(SP_PARM))
291 /* initialize screen for cursor access */
293 NCURSES_SP_NAME(_nc_putp) (NCURSES_SP_ARGx
299 * Doing this here rather than in _nc_mvcur_wrap() ensures that
300 * ncurses programs will see a reset scroll region even if a
301 * program that messed with it died ungracefully.
303 * This also undoes the effects of terminal init strings that assume
304 * they know the screen size. This is useful when you're running
305 * a vt100 emulation through xterm.
307 reset_scroll_region(NCURSES_SP_ARG);
308 SP_PARM->_cursrow = SP_PARM->_curscol = -1;
310 /* restore cursor shape */
311 if (SP_PARM->_cursor != -1) {
312 int cursor = SP_PARM->_cursor;
313 SP_PARM->_cursor = -1;
314 NCURSES_SP_NAME(curs_set) (NCURSES_SP_ARGx cursor);
320 _nc_mvcur_resume(void)
322 NCURSES_SP_NAME(_nc_mvcur_resume) (CURRENT_SCREEN);
327 NCURSES_SP_NAME(_nc_mvcur_init) (NCURSES_SP_DCL0)
328 /* initialize the cost structure */
330 if (SP_PARM->_ofp && isatty(fileno(SP_PARM->_ofp))) {
331 SP_PARM->_char_padding = ((BAUDBYTE * 1000 * 10)
332 / (BAUDRATE(SP_PARM) > 0
336 SP_PARM->_char_padding = 1; /* must be nonzero */
338 if (SP_PARM->_char_padding <= 0)
339 SP_PARM->_char_padding = 1; /* must be nonzero */
340 TR(TRACE_CHARPUT | TRACE_MOVE, ("char_padding %d msecs", SP_PARM->_char_padding));
342 /* non-parameterized local-motion strings */
343 SP_PARM->_cr_cost = CostOf(carriage_return, 0);
344 SP_PARM->_home_cost = CostOf(cursor_home, 0);
345 SP_PARM->_ll_cost = CostOf(cursor_to_ll, 0);
347 if (getenv("NCURSES_NO_HARD_TABS") == 0) {
348 SP_PARM->_ht_cost = CostOf(tab, 0);
349 SP_PARM->_cbt_cost = CostOf(back_tab, 0);
351 SP_PARM->_ht_cost = INFINITY;
352 SP_PARM->_cbt_cost = INFINITY;
354 #endif /* USE_HARD_TABS */
355 SP_PARM->_cub1_cost = CostOf(cursor_left, 0);
356 SP_PARM->_cuf1_cost = CostOf(cursor_right, 0);
357 SP_PARM->_cud1_cost = CostOf(cursor_down, 0);
358 SP_PARM->_cuu1_cost = CostOf(cursor_up, 0);
360 SP_PARM->_smir_cost = CostOf(enter_insert_mode, 0);
361 SP_PARM->_rmir_cost = CostOf(exit_insert_mode, 0);
362 SP_PARM->_ip_cost = 0;
363 if (insert_padding) {
364 SP_PARM->_ip_cost = CostOf(insert_padding, 0);
368 * Assumption: if the terminal has memory_relative addressing, the
369 * initialization strings or smcup will set single-page mode so we
370 * can treat it like absolute screen addressing. This seems to be true
371 * for all cursor_mem_address terminal types in the terminfo database.
373 SP_PARM->_address_cursor = cursor_address ? cursor_address : cursor_mem_address;
376 * Parametrized local-motion strings. This static cost computation
377 * depends on the following assumptions:
379 * (1) They never have * padding. In the entire master terminfo database
380 * as of March 1995, only the obsolete Zenith Z-100 pc violates this.
381 * (Proportional padding is found mainly in insert, delete and scroll
384 * (2) The average case of cup has two two-digit parameters. Strictly,
385 * the average case for a 24 * 80 screen has ((10*10*(1 + 1)) +
386 * (14*10*(1 + 2)) + (10*70*(2 + 1)) + (14*70*4)) / (24*80) = 3.458
387 * digits of parameters. On a 25x80 screen the average is 3.6197.
388 * On larger screens the value gets much closer to 4.
390 * (3) The average case of cub/cuf/hpa/ech/rep has 2 digits of parameters
391 * (strictly, (((10 * 1) + (70 * 2)) / 80) = 1.8750).
393 * (4) The average case of cud/cuu/vpa has 2 digits of parameters
394 * (strictly, (((10 * 1) + (14 * 2)) / 24) = 1.5833).
396 * All these averages depend on the assumption that all parameter values
397 * are equally probable.
399 SP_PARM->_cup_cost = CostOf(TPARM_2(SP_PARM->_address_cursor, 23, 23), 1);
400 SP_PARM->_cub_cost = CostOf(TPARM_1(parm_left_cursor, 23), 1);
401 SP_PARM->_cuf_cost = CostOf(TPARM_1(parm_right_cursor, 23), 1);
402 SP_PARM->_cud_cost = CostOf(TPARM_1(parm_down_cursor, 23), 1);
403 SP_PARM->_cuu_cost = CostOf(TPARM_1(parm_up_cursor, 23), 1);
404 SP_PARM->_hpa_cost = CostOf(TPARM_1(column_address, 23), 1);
405 SP_PARM->_vpa_cost = CostOf(TPARM_1(row_address, 23), 1);
407 /* non-parameterized screen-update strings */
408 SP_PARM->_ed_cost = NormalizedCost(clr_eos, 1);
409 SP_PARM->_el_cost = NormalizedCost(clr_eol, 1);
410 SP_PARM->_el1_cost = NormalizedCost(clr_bol, 1);
411 SP_PARM->_dch1_cost = NormalizedCost(delete_character, 1);
412 SP_PARM->_ich1_cost = NormalizedCost(insert_character, 1);
415 * If this is a bce-terminal, we want to bias the choice so we use clr_eol
416 * rather than spaces at the end of a line.
418 if (back_color_erase)
419 SP_PARM->_el_cost = 0;
421 /* parameterized screen-update strings */
422 SP_PARM->_dch_cost = NormalizedCost(TPARM_1(parm_dch, 23), 1);
423 SP_PARM->_ich_cost = NormalizedCost(TPARM_1(parm_ich, 23), 1);
424 SP_PARM->_ech_cost = NormalizedCost(TPARM_1(erase_chars, 23), 1);
425 SP_PARM->_rep_cost = NormalizedCost(TPARM_2(repeat_char, ' ', 23), 1);
427 SP_PARM->_cup_ch_cost = NormalizedCost(
428 TPARM_2(SP_PARM->_address_cursor,
431 SP_PARM->_hpa_ch_cost = NormalizedCost(TPARM_1(column_address, 23), 1);
432 SP_PARM->_cuf_ch_cost = NormalizedCost(TPARM_1(parm_right_cursor, 23), 1);
433 SP_PARM->_inline_cost = min(SP_PARM->_cup_ch_cost,
434 min(SP_PARM->_hpa_ch_cost,
435 SP_PARM->_cuf_ch_cost));
438 * If save_cursor is used within enter_ca_mode, we should not use it for
439 * scrolling optimization, since the corresponding restore_cursor is not
440 * nested on the various terminals (vt100, xterm, etc.) which use this
444 && enter_ca_mode != 0
445 && strstr(enter_ca_mode, save_cursor) != 0) {
446 T(("...suppressed sc/rc capability due to conflict with smcup/rmcup"));
452 * A different, possibly better way to arrange this would be to set the
453 * SCREEN's _endwin to TRUE at window initialization time and let this be
454 * called by doupdate's return-from-shellout code.
456 NCURSES_SP_NAME(_nc_mvcur_resume) (NCURSES_SP_ARG);
463 NCURSES_SP_NAME(_nc_mvcur_init) (CURRENT_SCREEN);
468 NCURSES_SP_NAME(_nc_mvcur_wrap) (NCURSES_SP_DCL0)
469 /* wrap up cursor-addressing mode */
471 /* leave cursor at screen bottom */
472 TINFO_MVCUR(NCURSES_SP_ARGx -1, -1, screen_lines(SP_PARM) - 1, 0);
474 if (!SP_PARM || !IsTermInfo(SP_PARM))
477 /* set cursor to normal mode */
478 if (SP_PARM->_cursor != -1) {
479 int cursor = SP_PARM->_cursor;
480 NCURSES_SP_NAME(curs_set) (NCURSES_SP_ARGx 1);
481 SP_PARM->_cursor = cursor;
485 NCURSES_SP_NAME(_nc_putp) (NCURSES_SP_ARGx
490 * Reset terminal's tab counter. There's a long-time bug that
491 * if you exit a "curses" program such as vi or more, tab
492 * forward, and then backspace, the cursor doesn't go to the
493 * right place. The problem is that the kernel counts the
494 * escape sequences that reset things as column positions.
495 * Utter a \r to reset this invisibly.
497 NCURSES_SP_NAME(_nc_outch) (NCURSES_SP_ARGx '\r');
504 NCURSES_SP_NAME(_nc_mvcur_wrap) (CURRENT_SCREEN);
508 /****************************************************************************
510 * Optimized cursor movement
512 ****************************************************************************/
515 * Perform repeated-append, returning cost
517 static NCURSES_INLINE int
518 repeated_append(string_desc * target, int total, int num, int repeat, const char *src)
520 size_t need = (size_t) repeat * strlen(src);
522 if (need < target->s_size) {
523 while (repeat-- > 0) {
524 if (_nc_safe_strcat(target, src)) {
538 #define NEXTTAB(fr) (fr + init_tabs - (fr % init_tabs))
541 * Assume back_tab (CBT) does not wrap backwards at the left margin, return
542 * a negative value at that point to simplify the loop.
544 #define LASTTAB(fr) ((fr > 0) ? ((fr - 1) / init_tabs) * init_tabs : -1)
547 relative_move(NCURSES_SP_DCLx
548 string_desc * target,
554 /* move via local motions (cuu/cuu1/cud/cud1/cub1/cub/cuf1/cuf/vpa/hpa) */
557 int n, vcost = 0, hcost = 0;
559 (void) _nc_str_copy(&save, target);
561 if (to_y != from_y) {
565 && _nc_safe_strcat(target, TPARM_1(row_address, to_y))) {
566 vcost = SP_PARM->_vpa_cost;
573 && SP_PARM->_cud_cost < vcost
574 && _nc_safe_strcat(_nc_str_copy(target, &save),
575 TPARM_1(parm_down_cursor, n))) {
576 vcost = SP_PARM->_cud_cost;
580 && (*cursor_down != '\n' || SP_PARM->_nl)
581 && (n * SP_PARM->_cud1_cost < vcost)) {
582 vcost = repeated_append(_nc_str_copy(target, &save), 0,
583 SP_PARM->_cud1_cost, n, cursor_down);
585 } else { /* (to_y < from_y) */
589 && SP_PARM->_cuu_cost < vcost
590 && _nc_safe_strcat(_nc_str_copy(target, &save),
591 TPARM_1(parm_up_cursor, n))) {
592 vcost = SP_PARM->_cuu_cost;
595 if (cursor_up && (n * SP_PARM->_cuu1_cost < vcost)) {
596 vcost = repeated_append(_nc_str_copy(target, &save), 0,
597 SP_PARM->_cuu1_cost, n, cursor_up);
601 if (vcost == INFINITY)
607 if (to_x != from_x) {
614 && _nc_safe_strcat(_nc_str_copy(target, &save),
615 TPARM_1(column_address, to_x))) {
616 hcost = SP_PARM->_hpa_cost;
622 if (parm_right_cursor
623 && SP_PARM->_cuf_cost < hcost
624 && _nc_safe_strcat(_nc_str_copy(target, &save),
625 TPARM_1(parm_right_cursor, n))) {
626 hcost = SP_PARM->_cuf_cost;
632 (void) _nc_str_init(&check, str, sizeof(str));
635 /* use hard tabs, if we have them, to do as much as possible */
636 if (init_tabs > 0 && tab) {
639 for (fr = from_x; (nxt = NEXTTAB(fr)) <= to_x; fr = nxt) {
640 lhcost = repeated_append(&check, lhcost,
641 SP_PARM->_ht_cost, 1, tab);
642 if (lhcost == INFINITY)
649 #endif /* USE_HARD_TABS */
651 if (n <= 0 || n >= (int) check.s_size)
655 * If we're allowing BSD-style padding in tputs, don't generate
656 * a string with a leading digit. Otherwise, that will be
657 * interpreted as a padding value rather than sent to the
662 && n < (int) check.s_size
665 int wanted = CharOf(WANT_CHAR(SP_PARM, to_y, from_x));
666 if (is8bits(wanted) && isdigit(wanted))
671 * If we have no attribute changes, overwrite is cheaper.
672 * Note: must suppress this by passing in ovw = FALSE whenever
673 * WANT_CHAR would return invalid data. In particular, this
674 * is true between the time a hardware scroll has been done
675 * and the time the structure WANT_CHAR would access has been
681 for (i = 0; i < n; i++) {
682 NCURSES_CH_T ch = WANT_CHAR(SP_PARM, to_y, from_x + i);
683 if (!SameAttrOf(ch, SCREEN_ATTRS(SP_PARM))
684 #if USE_WIDEC_SUPPORT
696 for (i = 0; i < n; i++)
697 *check.s_tail++ = (char) CharOf(WANT_CHAR(SP_PARM, to_y,
699 *check.s_tail = '\0';
700 check.s_size -= (size_t) n;
701 lhcost += n * SP_PARM->_char_padding;
703 lhcost = repeated_append(&check, lhcost, SP_PARM->_cuf1_cost,
708 && _nc_safe_strcat(_nc_str_copy(target, &save), str)) {
712 } else { /* (to_x < from_x) */
716 && SP_PARM->_cub_cost < hcost
717 && _nc_safe_strcat(_nc_str_copy(target, &save),
718 TPARM_1(parm_left_cursor, n))) {
719 hcost = SP_PARM->_cub_cost;
725 (void) _nc_str_init(&check, str, sizeof(str));
728 if (init_tabs > 0 && back_tab) {
731 for (fr = from_x; (nxt = LASTTAB(fr)) >= to_x; fr = nxt) {
732 lhcost = repeated_append(&check, lhcost,
735 if (lhcost == INFINITY)
741 #endif /* USE_HARD_TABS */
743 lhcost = repeated_append(&check, lhcost,
748 && _nc_safe_strcat(_nc_str_copy(target, &save), str)) {
754 if (hcost == INFINITY)
758 return (vcost + hcost);
760 #endif /* !NO_OPTIMIZE */
763 * With the machinery set up above, it's conceivable that
764 * onscreen_mvcur could be modified into a recursive function that does
765 * an alpha-beta search of motion space, as though it were a chess
766 * move tree, with the weight function being boolean and the search
767 * depth equated to length of string. However, this would jack up the
768 * computation cost a lot, especially on terminals without a cup
769 * capability constraining the search tree depth. So we settle for
770 * the simpler method below.
773 static NCURSES_INLINE int
774 onscreen_mvcur(NCURSES_SP_DCLx int yold, int xold, int ynew, int xnew, int ovw)
775 /* onscreen move from (yold, xold) to (ynew, xnew) */
778 char buffer[OPT_SIZE];
779 int tactic = 0, newcost, usecost = INFINITY;
782 #if defined(MAIN) || defined(NCURSES_TEST)
783 struct timeval before, after;
785 gettimeofday(&before, NULL);
788 #define NullResult _nc_str_null(&result, sizeof(buffer))
789 #define InitResult _nc_str_init(&result, buffer, sizeof(buffer))
791 /* tactic #0: use direct cursor addressing */
792 if (_nc_safe_strcpy(InitResult, TPARM_2(SP_PARM->_address_cursor, ynew, xnew))) {
794 usecost = SP_PARM->_cup_cost;
796 #if defined(TRACE) || defined(NCURSES_TEST)
797 if (!(_nc_optimize_enable & OPTIMIZE_MVCUR))
802 * We may be able to tell in advance that the full optimization
803 * will probably not be worth its overhead. Also, don't try to
804 * use local movement if the current attribute is anything but
805 * A_NORMAL...there are just too many ways this can screw up
806 * (like, say, local-movement \n getting mapped to some obscure
807 * character because A_ALTCHARSET is on).
809 if (yold == -1 || xold == -1 || NOT_LOCAL(SP_PARM, yold, xold, ynew, xnew)) {
810 #if defined(MAIN) || defined(NCURSES_TEST)
812 (void) fputs("nonlocal\n", stderr);
813 goto nonlocal; /* always run the optimizer if profiling */
821 /* tactic #1: use local movement */
822 if (yold != -1 && xold != -1
823 && ((newcost = relative_move(NCURSES_SP_ARGx
826 ynew, xnew, ovw)) != INFINITY)
827 && newcost < usecost) {
832 /* tactic #2: use carriage-return + local movement */
833 if (yold != -1 && carriage_return
834 && ((newcost = relative_move(NCURSES_SP_ARGx
837 ynew, xnew, ovw)) != INFINITY)
838 && SP_PARM->_cr_cost + newcost < usecost) {
840 usecost = SP_PARM->_cr_cost + newcost;
843 /* tactic #3: use home-cursor + local movement */
845 && ((newcost = relative_move(NCURSES_SP_ARGx
848 ynew, xnew, ovw)) != INFINITY)
849 && SP_PARM->_home_cost + newcost < usecost) {
851 usecost = SP_PARM->_home_cost + newcost;
854 /* tactic #4: use home-down + local movement */
856 && ((newcost = relative_move(NCURSES_SP_ARGx
858 screen_lines(SP_PARM) - 1, 0,
859 ynew, xnew, ovw)) != INFINITY)
860 && SP_PARM->_ll_cost + newcost < usecost) {
862 usecost = SP_PARM->_ll_cost + newcost;
866 * tactic #5: use left margin for wrap to right-hand side,
867 * unless strange wrap behavior indicated by xenl might hose us.
869 t5_cr_cost = (xold > 0 ? SP_PARM->_cr_cost : 0);
870 if (auto_left_margin && !eat_newline_glitch
871 && yold > 0 && cursor_left
872 && ((newcost = relative_move(NCURSES_SP_ARGx
874 yold - 1, screen_columns(SP_PARM) - 1,
875 ynew, xnew, ovw)) != INFINITY)
876 && t5_cr_cost + SP_PARM->_cub1_cost + newcost < usecost) {
878 usecost = t5_cr_cost + SP_PARM->_cub1_cost + newcost;
882 * These cases are ordered by estimated relative frequency.
888 (void) relative_move(NCURSES_SP_ARGx
894 (void) _nc_safe_strcpy(&result, carriage_return);
895 (void) relative_move(NCURSES_SP_ARGx
901 (void) _nc_safe_strcpy(&result, cursor_home);
902 (void) relative_move(NCURSES_SP_ARGx
907 (void) _nc_safe_strcpy(&result, cursor_to_ll);
908 (void) relative_move(NCURSES_SP_ARGx
910 screen_lines(SP_PARM) - 1, 0,
915 (void) _nc_safe_strcat(&result, carriage_return);
916 (void) _nc_safe_strcat(&result, cursor_left);
917 (void) relative_move(NCURSES_SP_ARGx
919 yold - 1, screen_columns(SP_PARM) - 1,
923 #endif /* !NO_OPTIMIZE */
926 #if defined(MAIN) || defined(NCURSES_TEST)
927 gettimeofday(&after, NULL);
928 diff = after.tv_usec - before.tv_usec
929 + (after.tv_sec - before.tv_sec) * 1000000;
931 (void) fprintf(stderr,
932 "onscreen: %d microsec, %f 28.8Kbps char-equivalents\n",
933 (int) diff, diff / 288);
936 if (usecost != INFINITY) {
937 TPUTS_TRACE("mvcur");
938 NCURSES_SP_NAME(tputs) (NCURSES_SP_ARGx
939 buffer, 1, NCURSES_SP_NAME(_nc_outch));
940 SP_PARM->_cursrow = ynew;
941 SP_PARM->_curscol = xnew;
948 TINFO_MVCUR(NCURSES_SP_DCLx int yold, int xold, int ynew, int xnew)
949 /* optimized cursor move from (yold, xold) to (ynew, xnew) */
951 NCURSES_CH_T oldattr;
954 TR(TRACE_CALLS | TRACE_MOVE, (T_CALLED("_nc_tinfo_mvcur(%p,%d,%d,%d,%d)"),
955 (void *) SP_PARM, yold, xold, ynew, xnew));
959 } else if (yold == ynew && xold == xnew) {
964 * Most work here is rounding for terminal boundaries getting the
965 * column position implied by wraparound or the lack thereof and
966 * rolling up the screen to get ynew on the screen.
968 if (xnew >= screen_columns(SP_PARM)) {
969 ynew += xnew / screen_columns(SP_PARM);
970 xnew %= screen_columns(SP_PARM);
974 * Force restore even if msgr is on when we're in an alternate
975 * character set -- these have a strong tendency to screw up the CR &
976 * LF used for local character motions!
978 oldattr = SCREEN_ATTRS(SP_PARM);
979 if ((AttrOf(oldattr) & A_ALTCHARSET)
980 || (AttrOf(oldattr) && !move_standout_mode)) {
981 TR(TRACE_CHARPUT, ("turning off (%#lx) %s before move",
982 (unsigned long) AttrOf(oldattr),
983 _traceattr(AttrOf(oldattr))));
984 (void) VIDATTR(SP_PARM, A_NORMAL, 0);
987 if (xold >= screen_columns(SP_PARM)) {
991 l = (xold + 1) / screen_columns(SP_PARM);
993 if (yold >= screen_lines(SP_PARM))
994 l -= (yold - screen_lines(SP_PARM) - 1);
997 if (carriage_return) {
998 NCURSES_SP_NAME(_nc_putp) (NCURSES_SP_ARGx
1002 NCURSES_SP_NAME(_nc_outch) (NCURSES_SP_ARGx '\r');
1007 NCURSES_SP_NAME(_nc_putp) (NCURSES_SP_ARGx
1011 NCURSES_SP_NAME(_nc_outch) (NCURSES_SP_ARGx '\n');
1017 * If caller set nonl(), we cannot really use newlines to
1018 * position to the next row.
1025 if (yold > screen_lines(SP_PARM) - 1)
1026 yold = screen_lines(SP_PARM) - 1;
1027 if (ynew > screen_lines(SP_PARM) - 1)
1028 ynew = screen_lines(SP_PARM) - 1;
1030 /* destination location is on screen now */
1031 code = onscreen_mvcur(NCURSES_SP_ARGx yold, xold, ynew, xnew, TRUE);
1034 * Restore attributes if we disabled them before moving.
1036 if (!SameAttrOf(oldattr, SCREEN_ATTRS(SP_PARM))) {
1037 TR(TRACE_CHARPUT, ("turning on (%#lx) %s after move",
1038 (unsigned long) AttrOf(oldattr),
1039 _traceattr(AttrOf(oldattr))));
1040 (void) VIDATTR(SP_PARM, AttrOf(oldattr), GetPair(oldattr));
1046 #if NCURSES_SP_FUNCS && !defined(USE_TERM_DRIVER)
1048 mvcur(int yold, int xold, int ynew, int xnew)
1050 return NCURSES_SP_NAME(mvcur) (CURRENT_SCREEN, yold, xold, ynew, xnew);
1054 #if defined(TRACE) || defined(NCURSES_TEST)
1055 NCURSES_EXPORT_VAR(int) _nc_optimize_enable = OPTIMIZE_ALL;
1058 #if defined(MAIN) || defined(NCURSES_TEST)
1059 /****************************************************************************
1061 * Movement optimizer test code
1063 ****************************************************************************/
1066 #include <dump_entry.h>
1069 NCURSES_EXPORT_VAR(const char *) _nc_progname = "mvcur";
1071 static unsigned long xmits;
1073 /* these override lib_tputs.c */
1075 tputs(const char *string, int affcnt GCC_UNUSED, int (*outc) (int) GCC_UNUSED)
1076 /* stub tputs() that dumps sequences in a visible form */
1079 xmits += strlen(string);
1081 (void) fputs(_nc_visbuf(string), stdout);
1086 putp(const char *string)
1088 return (tputs(string, 1, _nc_outch));
1099 delay_output(int ms GCC_UNUSED)
1104 static char tname[PATH_MAX];
1109 (void) setupterm(tname, STDOUT_FILENO, NULL);
1117 i = (RAND_MAX / n) * n;
1118 while ((j = rand()) >= i)
1124 main(int argc GCC_UNUSED, char *argv[]GCC_UNUSED)
1126 strcpy(tname, getenv("TERM"));
1128 _nc_setupscreen(lines, columns, stdout, FALSE, 0);
1134 (void) puts("The mvcur tester. Type ? for help");
1136 fputs("smcup:", stdout);
1140 int fy, fx, ty, tx, n, i;
1141 char buf[BUFSIZ], capname[BUFSIZ];
1143 (void) fputs("> ", stdout);
1144 (void) fgets(buf, sizeof(buf), stdin);
1146 if (buf[0] == '?') {
1147 (void) puts("? -- display this help message");
1149 puts("fy fx ty tx -- (4 numbers) display (fy,fx)->(ty,tx) move");
1150 (void) puts("s[croll] n t b m -- display scrolling sequence");
1152 printf("r[eload] -- reload terminal info for %s\n",
1155 puts("l[oad] <term> -- load terminal info for type <term>");
1156 (void) puts("d[elete] <cap> -- delete named capability");
1157 (void) puts("i[nspect] -- display terminal capabilities");
1159 puts("c[ost] -- dump cursor-optimization cost table");
1160 (void) puts("o[optimize] -- toggle movement optimization");
1162 puts("t[orture] <num> -- torture-test with <num> random moves");
1163 (void) puts("q[uit] -- quit the program");
1164 } else if (sscanf(buf, "%d %d %d %d", &fy, &fx, &ty, &tx) == 4) {
1165 struct timeval before, after;
1169 gettimeofday(&before, NULL);
1170 mvcur(fy, fx, ty, tx);
1171 gettimeofday(&after, NULL);
1173 printf("\" (%ld msec)\n",
1174 (long) (after.tv_usec - before.tv_usec
1175 + (after.tv_sec - before.tv_sec)
1177 } else if (sscanf(buf, "s %d %d %d %d", &fy, &fx, &ty, &tx) == 4) {
1178 struct timeval before, after;
1182 gettimeofday(&before, NULL);
1183 _nc_scrolln(fy, fx, ty, tx);
1184 gettimeofday(&after, NULL);
1186 printf("\" (%ld msec)\n",
1187 (long) (after.tv_usec - before.tv_usec + (after.tv_sec -
1190 } else if (buf[0] == 'r') {
1191 (void) strcpy(tname, termname());
1193 } else if (sscanf(buf, "l %s", tname) == 1) {
1195 } else if (sscanf(buf, "d %s", capname) == 1) {
1196 struct name_table_entry const *np = _nc_find_entry(capname,
1197 _nc_get_hash_table(FALSE));
1200 (void) printf("No such capability as \"%s\"\n", capname);
1202 switch (np->nte_type) {
1204 cur_term->type.Booleans[np->nte_index] = FALSE;
1206 printf("Boolean capability `%s' (%d) turned off.\n",
1207 np->nte_name, np->nte_index);
1211 cur_term->type.Numbers[np->nte_index] = ABSENT_NUMERIC;
1212 (void) printf("Number capability `%s' (%d) set to -1.\n",
1213 np->nte_name, np->nte_index);
1217 cur_term->type.Strings[np->nte_index] = ABSENT_STRING;
1218 (void) printf("String capability `%s' (%d) deleted.\n",
1219 np->nte_name, np->nte_index);
1223 } else if (buf[0] == 'i') {
1224 dump_init((char *) NULL, F_TERMINFO, S_TERMINFO, 70, 0, FALSE);
1225 dump_entry(&cur_term->type, FALSE, TRUE, 0, 0);
1227 } else if (buf[0] == 'o') {
1228 if (_nc_optimize_enable & OPTIMIZE_MVCUR) {
1229 _nc_optimize_enable &= ~OPTIMIZE_MVCUR;
1230 (void) puts("Optimization is now off.");
1232 _nc_optimize_enable |= OPTIMIZE_MVCUR;
1233 (void) puts("Optimization is now on.");
1237 * You can use the `t' test to profile and tune the movement
1238 * optimizer. Use iteration values in three digits or more.
1239 * At above 5000 iterations the profile timing averages are stable
1240 * to within a millisecond or three.
1242 * The `overhead' field of the report will help you pick a
1243 * COMPUTE_OVERHEAD figure appropriate for your processor and
1244 * expected line speed. The `total estimated time' is
1245 * computation time plus a character-transmission time
1246 * estimate computed from the number of transmits and the baud
1249 * Use this together with the `o' command to get a read on the
1250 * optimizer's effectiveness. Compare the total estimated times
1251 * for `t' runs of the same length in both optimized and un-optimized
1252 * modes. As long as the optimized times are less, the optimizer
1255 else if (sscanf(buf, "t %d", &n) == 1) {
1256 float cumtime = 0.0, perchar;
1258 {2400, 9600, 14400, 19200, 28800, 38400, 0};
1260 srand((unsigned) (getpid() + time((time_t *) 0)));
1263 for (i = 0; i < n; i++) {
1265 * This does a move test between two random locations,
1266 * Random moves probably short-change the optimizer,
1267 * which will work better on the short moves probably
1268 * typical of doupdate()'s usage pattern. Still,
1269 * until we have better data...
1271 #ifdef FIND_COREDUMP
1272 int from_y = roll(lines);
1273 int to_y = roll(lines);
1274 int from_x = roll(columns);
1275 int to_x = roll(columns);
1277 printf("(%d,%d) -> (%d,%d)\n", from_y, from_x, to_y, to_x);
1278 mvcur(from_y, from_x, to_y, to_x);
1280 mvcur(roll(lines), roll(columns), roll(lines), roll(columns));
1281 #endif /* FIND_COREDUMP */
1288 * Average milliseconds per character optimization time.
1289 * This is the key figure to watch when tuning the optimizer.
1291 perchar = cumtime / n;
1293 (void) printf("%d moves (%ld chars) in %d msec, %f msec each:\n",
1294 n, xmits, (int) cumtime, perchar);
1296 for (i = 0; speeds[i]; i++) {
1298 * Total estimated time for the moves, computation and
1299 * transmission both. Transmission time is an estimate
1300 * assuming 9 bits/char, 8 bits + 1 stop bit.
1302 float totalest = cumtime + xmits * 9 * 1e6 / speeds[i];
1305 * Per-character optimization overhead in character transmits
1306 * at the current speed. Round this to the nearest integer
1307 * to figure COMPUTE_OVERHEAD for the speed.
1309 float overhead = speeds[i] * perchar / 1e6;
1312 printf("%6d bps: %3.2f char-xmits overhead; total estimated time %15.2f\n",
1313 speeds[i], overhead, totalest);
1315 } else if (buf[0] == 'c') {
1316 (void) printf("char padding: %d\n", CURRENT_SCREEN->_char_padding);
1317 (void) printf("cr cost: %d\n", CURRENT_SCREEN->_cr_cost);
1318 (void) printf("cup cost: %d\n", CURRENT_SCREEN->_cup_cost);
1319 (void) printf("home cost: %d\n", CURRENT_SCREEN->_home_cost);
1320 (void) printf("ll cost: %d\n", CURRENT_SCREEN->_ll_cost);
1322 (void) printf("ht cost: %d\n", CURRENT_SCREEN->_ht_cost);
1323 (void) printf("cbt cost: %d\n", CURRENT_SCREEN->_cbt_cost);
1324 #endif /* USE_HARD_TABS */
1325 (void) printf("cub1 cost: %d\n", CURRENT_SCREEN->_cub1_cost);
1326 (void) printf("cuf1 cost: %d\n", CURRENT_SCREEN->_cuf1_cost);
1327 (void) printf("cud1 cost: %d\n", CURRENT_SCREEN->_cud1_cost);
1328 (void) printf("cuu1 cost: %d\n", CURRENT_SCREEN->_cuu1_cost);
1329 (void) printf("cub cost: %d\n", CURRENT_SCREEN->_cub_cost);
1330 (void) printf("cuf cost: %d\n", CURRENT_SCREEN->_cuf_cost);
1331 (void) printf("cud cost: %d\n", CURRENT_SCREEN->_cud_cost);
1332 (void) printf("cuu cost: %d\n", CURRENT_SCREEN->_cuu_cost);
1333 (void) printf("hpa cost: %d\n", CURRENT_SCREEN->_hpa_cost);
1334 (void) printf("vpa cost: %d\n", CURRENT_SCREEN->_vpa_cost);
1335 } else if (buf[0] == 'x' || buf[0] == 'q')
1338 (void) puts("Invalid command.");
1341 (void) fputs("rmcup:", stdout);
1350 /* lib_mvcur.c ends here */