tput,  reset  -  initialize  a  terminal or query terminfo


       tput [-Ttype] capname [parms ... ]
       tput [-Ttype] init
       tput [-Ttype] reset
       tput [-Ttype] longname
       tput -S  <<
       tput -V


       The tput utility uses the terminfo database  to  make  the
       values  of terminal-dependent capabilities and information
       available to the shell (see sh(1)), to initialize or reset
       the  terminal,  or  return  the long name of the requested
       terminal type.  tput outputs a  string  if  the  attribute
       (capability  name) is of type string, or an integer if the
       attribute is of type integer.  If the attribute is of type
       boolean, tput simply sets the exit code (0 for TRUE if the
       terminal has the capability, 1 for FALSE if it does  not),
       and  produces no output.  Before using a value returned on
       standard output, the user should test the exit  code  [$?,
       see  sh(1)]  to  be sure it is 0.  (See the EXIT CODES and
       DIAGNOSTICS sections.)  For a complete list  of  capabili-
       ties  and  the  capname  associated  with  each,  see ter-

       -Ttype indicates the  type  of  terminal.   Normally  this
              option is unnecessary, because the default is taken
              from the environment variable TERM.  If -T is spec-
              ified,  then  the shell variables LINES and COLUMNS
              will be ignored,and the operating system  will  not
              be queried for the actual screen size.

              indicates the attribute from the terminfo database.
              When termcap support is compiled  in,  the  termcap
              name for the attribute is also accepted.

       parms  If the attribute is a string that takes parameters,
              the arguments parms will be instantiated  into  the
              string.   An all numeric argument will be passed to
              the attribute as a number.

       -S     allows more than one capability per  invocation  of
              tput.  The capabilities must be passed to tput from
              the standard input instead of from the command line
              (see  example).   Only  one  capname is allowed per
              line.  The -S option changes the meaning of  the  0
              and  1  boolean and string exit codes (see the EXIT
              CODES section).

       -V     reports the version of ncurses which  was  used  in
              this program, and exits.

       init   If  the  terminfo  database is present and an entry
              for the user's terminal exists (see -Ttype, above),
              the  following will occur: (1) if present, the ter-
              minal's initialization strings will be output (is1,
              is2,  is3,  if,  iprog), (2) any delays (e.g., new-
              line) specified in the entry will be set in the tty
              driver, (3) tabs expansion will be turned on or off
              according to the specification in  the  entry,  and
              (4) if tabs are not expanded, standard tabs will be
              set (every 8 spaces).  If an entry does not contain
              the  information  needed  for any of the four above
              activities, that activity will silently be skipped.

       reset  Instead  of putting out initialization strings, the
              terminal's reset strings will be output if  present
              (rs1,  rs2, rs3, rf).  If the reset strings are not
              present, but initialization strings are,  the  ini-
              tialization  strings  will  be  output.  Otherwise,
              reset acts identically to init.

              If the terminfo database is present  and  an  entry
              for  the user's terminal exists (see -Ttype above),
              then the long name of the terminal will be put out.
              The long name is the last name in the first line of
              the terminal's description in the terminfo database
              [see term(5)].

       If  tput  is  invoked  by a link named reset, this has the
       same effect as tput reset.  See tset for comparison, which
       has similar behavior.


       tput init
            Initialize the terminal according to the type of ter-
            minal in the environmental variable TERM.  This  com-
            mand  should be included in everyone's .profile after
            the environmental variable TERM has been exported, as
            illustrated on the profile(4) manual page.

       tput -T5620 reset
            Reset  an  AT&T 5620 terminal, overriding the type of
            terminal in the environmental variable TERM.

       tput cup 0 0
            Send the sequence to move the cursor to row 0, column
            0 (the upper left corner of the screen, usually known
            as the "home" cursor position).

       tput clear
            Echo  the  clear-screen  sequence  for  the   current

       tput cols
            Print the number of columns for the current terminal.

       tput -T450 cols
            Print the number of columns for the 450 terminal.

       bold=`tput smso` offbold=`tput rmso`
            Set the shell variables bold, to begin stand-out mode
            sequence, and offbold, to end standout mode sequence,
            for the current terminal.  This might be followed  by
            a  prompt:  echo  "${bold}Please  type  in your name:

       tput hc
            Set exit code to indicate if the current terminal  is
            a hard copy terminal.

       tput cup 23 4
            Send  the sequence to move the cursor to row 23, col-
            umn 4.

       tput longname
            Print the long name from the  terminfo  database  for
            the  type  of terminal specified in the environmental
            variable TERM.

            tput -S <<!
            > clear
            > cup 10 10
            > bold
            > !

            This example shows tput processing several  capabili-
            ties  in  one  invocation.   This  example clears the
            screen, moves the cursor to position 10, 10 and turns
            on  bold (extra bright) mode.  The list is terminated
            by an exclamation mark (!) on a line by itself.


              compiled terminal description database

              curses(3x) header file

              terminfo header file

              tab settings for some terminals, in a format appro-
              priate   to  be  output  to  the  terminal  (escape
              sequences that set  margins  and  tabs);  for  more
              information, see the "Tabs and Initialization" sec-
              tion of terminfo(4)


       clear(1), stty(1), tabs(5).   profile(5),  terminfo(4)  in
       the  System  Administrator's Reference Manual.  Chapter 10
       of the Programmer's Guide.


       If capname is of type boolean, a value of  0  is  set  for
       TRUE and 1 for FALSE unless the -S option is used.

       If  capname  is of type string, a value of 0 is set if the
       capname is defined for this terminal type  (the  value  of
       capname  is  returned on standard output); a value of 1 is
       set if capname is not defined for this  terminal  type  (a
       null value is returned on standard output).

       If  capname is of type boolean or string and the -S option
       is used, a value of 0 is returned  to  indicate  that  all
       lines were successful.  No indication of which line failed
       can be given so exit code 1 will never appear.  Exit codes
       2, 3, and 4 retain their usual interpretation.

       If capname is of type integer, a value of 0 is always set,
       whether or not capname is defined for this terminal  type.
       To determine if capname is defined for this terminal type,
       the user must test the value of standard output.  A  value
       of  -1 means that capname is not defined for this terminal

       Any other exit code indicates an error; see  the  DIAGNOS-
       TICS section.


       tput prints the following error messages and sets the cor-
       responding exit codes.

       exit code   error message
       0           (capname is a numeric variable that is not specified  in
                   the  terminfo(5)  database  for this terminal type, e.g.
                   tput -T450 lines and tput -T2621 xmc)
       1           no error message is printed, see the EXIT CODES section.
       2           usage error
       3           unknown terminal type or no terminfo database
       4           unknown terminfo capability capname


       The longname and -S options, and  the  parameter-substitu-
       tion  features  used in the cup example, are not supported
       in BSD curses or in AT&T/USL curses before SVr4.

Man(1) output converted with man2html