]> ncurses.scripts.mit.edu Git - ncurses.git/blobdiff - INSTALL
ncurses 5.9 - patch 20140906
[ncurses.git] / INSTALL
diff --git a/INSTALL b/INSTALL
index bc3a4f849552f03267912e49102ad8f214fd7786..36c0bbcb24c51d79b4c0a9b7debcab1bba45c398 100644 (file)
--- a/INSTALL
+++ b/INSTALL
@@ -1,4 +1,31 @@
--- $Id: INSTALL,v 1.98 2005/10/09 14:09:37 tom Exp $
+-------------------------------------------------------------------------------
+-- Copyright (c) 1998-2013,2014 Free Software Foundation, Inc.               --
+--                                                                           --
+-- Permission is hereby granted, free of charge, to any person obtaining a   --
+-- copy of this software and associated documentation files (the             --
+-- "Software"), to deal in the Software without restriction, including       --
+-- without limitation the rights to use, copy, modify, merge, publish,       --
+-- distribute, distribute with modifications, sublicense, and/or sell copies --
+-- of the Software, and to permit persons to whom the Software is furnished  --
+-- to do so, subject to the following conditions:                            --
+--                                                                           --
+-- The above copyright notice and this permission notice shall be included   --
+-- in all copies or substantial portions of the Software.                    --
+--                                                                           --
+-- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS   --
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF                --
+-- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN --
+-- NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,       --
+-- DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR     --
+-- OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE --
+-- USE OR OTHER DEALINGS IN THE SOFTWARE.                                    --
+--                                                                           --
+-- Except as contained in this notice, the name(s) of the above copyright    --
+-- holders shall not be used in advertising or otherwise to promote the      --
+-- sale, use or other dealings in this Software without prior written        --
+-- authorization.                                                            --
+-------------------------------------------------------------------------------
+-- $Id: INSTALL,v 1.172 2014/06/21 18:53:42 tom Exp $
 ---------------------------------------------------------------------
              How to install Ncurses/Terminfo on your system
 ---------------------------------------------------------------------
 ---------------------------------------------------------------------
              How to install Ncurses/Terminfo on your system
 ---------------------------------------------------------------------
@@ -12,9 +39,8 @@ d.d is the current version number.  There should be several subdirectories,
 including `c++', `form', `man', `menu', 'misc', `ncurses', `panel', `progs',
 and `test'.  See the README file for a roadmap to the package.
 
 including `c++', `form', `man', `menu', 'misc', `ncurses', `panel', `progs',
 and `test'.  See the README file for a roadmap to the package.
 
-If you are a Linux or FreeBSD or NetBSD distribution integrator or packager,
-please read and act on the section titled IF YOU ARE A SYSTEM INTEGRATOR
-below.
+If you are a distribution integrator or packager, please read and act on the
+section titled IF YOU ARE A SYSTEM INTEGRATOR below.
 
 If you are converting from BSD curses and do not have root access, be sure
 to read the BSD CONVERSION NOTES section below.
 
 If you are converting from BSD curses and do not have root access, be sure
 to read the BSD CONVERSION NOTES section below.
@@ -31,10 +57,6 @@ CROSS-COMPILER.
 If you want to build the Ada95 binding, go to the Ada95 directory and
 follow the instructions there.  The Ada95 binding is not covered below.
 
 If you want to build the Ada95 binding, go to the Ada95 directory and
 follow the instructions there.  The Ada95 binding is not covered below.
 
-If you are using anything but (a) Linux, or (b) one of the 4.4BSD-based
-i386 Unixes, go read the Portability section in the TO-DO file before you
-do anything else.
-
 
 REQUIREMENTS:
 ------------
 
 REQUIREMENTS:
 ------------
@@ -59,14 +81,14 @@ INSTALLATION PROCEDURE:
 
     The --prefix option to configure changes the root directory for installing
     ncurses.  The default is normally in subdirectories of /usr/local, except
 
     The --prefix option to configure changes the root directory for installing
     ncurses.  The default is normally in subdirectories of /usr/local, except
-    for systems where ncurses is normally installed as a system library, e.g.,
-    Linux, the various BSD systems and Cygwin.  Use --prefix=/usr to replace
-    your default curses distribution.
+    for systems where ncurses is normally installed as a system library (see
+    "IF YOU ARE A SYSTEM INTEGRATOR").  Use --prefix=/usr to replace your
+    default curses distribution.
 
     The package gets installed beneath the --prefix directory as follows:
 
     In $(prefix)/bin:          tic, infocmp, captoinfo, tset,
 
     The package gets installed beneath the --prefix directory as follows:
 
     In $(prefix)/bin:          tic, infocmp, captoinfo, tset,
-                               reset, clear, tput, toe
+                               reset, clear, tput, toe, tabs
     In $(prefix)/lib:          libncurses*.* libcurses.a
     In $(prefix)/share/terminfo: compiled terminal descriptions
     In $(prefix)/include:      C header files
     In $(prefix)/lib:          libncurses*.* libcurses.a
     In $(prefix)/share/terminfo: compiled terminal descriptions
     In $(prefix)/include:      C header files
@@ -78,12 +100,12 @@ INSTALLATION PROCEDURE:
 
     Do not use commands such as
 
 
     Do not use commands such as
 
-       make install prefix=XXX
+       make install prefix=XXX
 
     to change the prefix after configuration, since the prefix value is used
     for some absolute pathnames such as TERMINFO.  Instead do this
 
 
     to change the prefix after configuration, since the prefix value is used
     for some absolute pathnames such as TERMINFO.  Instead do this
 
-       make install DESTDIR=XXX
+       make install DESTDIR=XXX
 
     See also the discussion of --with-install-prefix.
 
 
     See also the discussion of --with-install-prefix.
 
@@ -120,7 +142,10 @@ INSTALLATION PROCEDURE:
     library interfaces are not binary-compatible with the non-wide-character
     version.  Building and running the wide-character code relies on a fairly
     recent implementation of libiconv.  We have built this configuration on
     library interfaces are not binary-compatible with the non-wide-character
     version.  Building and running the wide-character code relies on a fairly
     recent implementation of libiconv.  We have built this configuration on
-    Linux using libiconv, sometimes requiring libutf8.
+    various systems using libiconv, sometimes requiring libutf8.
+
+    If you configure using the --with-pthread option, a "t" is appended to
+    the library names (e.g., libncursest.a, libncursestw.a).
 
     If you do not specify any models, the normal and debug libraries will be
     configured.  Typing `configure' with no arguments is equivalent to:
 
     If you do not specify any models, the normal and debug libraries will be
     configured.  Typing `configure' with no arguments is equivalent to:
@@ -140,8 +165,8 @@ INSTALLATION PROCEDURE:
        ./configure --with-shared --without-normal --without-debug
 
     Rules for generating shared libraries are highly dependent upon the choice
        ./configure --with-shared --without-normal --without-debug
 
     Rules for generating shared libraries are highly dependent upon the choice
-    of host system and compiler.  We've been testing shared libraries on Linux
-    and SunOS with gcc, but more work needs to be done to make shared libraries
+    of host system and compiler.  We've been testing shared libraries on
+    several systems, but more work needs to be done to make shared libraries
     work on other systems.
 
     If you have libtool installed, you can type
     work on other systems.
 
     If you have libtool installed, you can type
@@ -277,6 +302,11 @@ SUMMARY OF CONFIGURE OPTIONS:
        return deceptive results, so you may have to override the configure
        script.  Or you may be building tic for a smaller machine.
 
        return deceptive results, so you may have to override the configure
        script.  Or you may be building tic for a smaller machine.
 
+    --disable-big-strings
+       Disable compile-time optimization of predefined tables which puts
+       all of their strings into a very long string, to reduce relocation
+       overhead.
+
     --disable-database
        Use only built-in data.  The ncurses libraries normally read terminfo
        and termcap data from disk.  You can configure ncurses to have a
     --disable-database
        Use only built-in data.  The ncurses libraries normally read terminfo
        and termcap data from disk.  You can configure ncurses to have a
@@ -285,6 +315,10 @@ SUMMARY OF CONFIGURE OPTIONS:
        programs are useful in this configuration, e.g., reset and tput versus
        infocmp and tic.
 
        programs are useful in this configuration, e.g., reset and tput versus
        infocmp and tic.
 
+    --disable-db-install
+       Do not install the terminal database.  This is used to omit features
+       for packages, as done with --without-progs.
+
     --disable-ext-funcs
        Disable function-extensions.  Configure ncurses without the functions
        that are not specified by XSI.  See ncurses/modules for the exact
     --disable-ext-funcs
        Disable function-extensions.  Configure ncurses without the functions
        that are not specified by XSI.  See ncurses/modules for the exact
@@ -303,10 +337,35 @@ SUMMARY OF CONFIGURE OPTIONS:
     --disable-largefile
        Disable compiler flags needed to use large-file interfaces.
 
     --disable-largefile
        Disable compiler flags needed to use large-file interfaces.
 
+    --disable-lib-suffixes
+       Suppress the "w", "t" or "tw" suffixes which normally would be added
+       to the library names for the --enable-widec and --with-pthread options.
+
+    --disable-libtool-version
+       when using --with-libtool, control how the major/minor version numbers
+       are used for constructing the library name.
+
+       The default uses the -version-number feature of libtool, which makes
+       the library names compatible (though not identical) with the standard
+       build using --with-shared.
+
+       Use --disable-libtool-version to use the libtool -version-info feature.
+       This corresponds to the setting used before patch 20100515.
+
     --disable-leaks
        For testing, compile-in code that frees memory that normally would not
        be freed, to simplify analysis of memory-leaks.
 
     --disable-leaks
        For testing, compile-in code that frees memory that normally would not
        be freed, to simplify analysis of memory-leaks.
 
+       Any implementation of curses must not free the memory associated with
+       a screen, since (even after calling endwin()), it must be available
+       for use in the next call to refresh().  There are also chunks of
+       memory held for performance reasons.  That makes it hard to analyze
+       curses applications for memory leaks.  To work around this, build
+       a debugging version of the ncurses library which frees those chunks
+       which it can, and provides the _nc_free_and_exit() function to free
+       the remainder on exit.  The ncurses utility and test programs use this
+       feature, e.g., via the ExitProgram() macro.
+
     --disable-lp64
        The header files will ignore use of the _LP64 symbol to make chtype
        and mmask_t types 32 bits (they may be long on 64-bit hosts, for
     --disable-lp64
        The header files will ignore use of the _LP64 symbol to make chtype
        and mmask_t types 32 bits (they may be long on 64-bit hosts, for
@@ -318,8 +377,8 @@ SUMMARY OF CONFIGURE OPTIONS:
 
     --disable-macros
        For testing, use functions rather than macros.  The program will run
 
     --disable-macros
        For testing, use functions rather than macros.  The program will run
-       more slowly, but it is simpler to debug.  This makes a header file
-       "nomacros.h".  See also the --enable-expanded option.
+       more slowly, but it is simpler to debug.  This defines NCURSES_NOMACROS
+       at build time.  See also the --enable-expanded option.
 
     --disable-overwrite
        If you are installing ncurses on a system which contains another
 
     --disable-overwrite
        If you are installing ncurses on a system which contains another
@@ -331,16 +390,47 @@ SUMMARY OF CONFIGURE OPTIONS:
        rather than the include directory.  This makes it simpler to avoid
        compile-time conflicts with other versions of curses.h
 
        rather than the include directory.  This makes it simpler to avoid
        compile-time conflicts with other versions of curses.h
 
+    --disable-relink
+       If --enable-rpath is given, the generated makefiles normally will
+       rebuild the libraries during install.  Use this option to simply
+       copy whatever the linked produced.
+
+       This option is ignored if --enable-rpath is not given.
+
     --disable-root-environ
        Compile with environment restriction, so certain environment variables
        are not available when running as root, or via a setuid/setgid
        application.  These are (for example $TERMINFO) those that allow the
        search path for the terminfo or termcap entry to be customized.
 
     --disable-root-environ
        Compile with environment restriction, so certain environment variables
        are not available when running as root, or via a setuid/setgid
        application.  These are (for example $TERMINFO) those that allow the
        search path for the terminfo or termcap entry to be customized.
 
+    --disable-rpath-hack
+       Normally the configure script helps link libraries found in unusual
+       places by adding an rpath option to the link command.  If you are
+       building packages, this feature may be redundant.  Use this option
+       to suppress the feature.
+
     --disable-scroll-hints
        Compile without scroll-hints code.  This option is ignored when
        hashmap scrolling is configured, which is the default.
 
     --disable-scroll-hints
        Compile without scroll-hints code.  This option is ignored when
        hashmap scrolling is configured, which is the default.
 
+    --disable-tic-depends
+       When building shared libraries, normally the tic library is linked to
+       depend upon the ncurses library (or equivalently, on the tinfo-library
+       if the --with-termlib option was given).  The tic- and tinfo-library
+       ABIs do not depend on the --enable-widec option.  Some packagers have
+       used this to reduce the number of library files which are packaged by
+       using only one copy of those libraries.  To make this work properly,
+       the tic library must be built without an explicit dependency on the
+       underlying library (ncurses vs ncursesw, tinfo vs tinfow).  Use this
+       configure option to do that.
+       For example
+               configure --with-ticlib --with-shared --disable-tic-depends
+
+    --disable-tparm-varargs
+       Portable programs should call tparm() using the fixed-length parameter
+       list documented in X/Open.  ncurses provides varargs support for this
+       function.  Use --disable-tparm-varargs to disable this support.
+
     --enable-assertions
        For testing, compile-in assertion code.  This is used only for a few
        places where ncurses cannot easily recover by returning an error code.
     --enable-assertions
        For testing, compile-in assertion code.  This is used only for a few
        places where ncurses cannot easily recover by returning an error code.
@@ -352,7 +442,7 @@ SUMMARY OF CONFIGURE OPTIONS:
        changes several data references to functions to work around this
        problem.
 
        changes several data references to functions to work around this
        problem.
 
-       NOTE:  With ncurses 5.1, this may not be necessary, since we are
+       NOTE: With ncurses 5.1, this may not be necessary, since we are
        told that some linkers interpret uninitialized global data as a
        different type of reference which behaves as described above.  We have
        explicitly initialized all of the global data to work around the
        told that some linkers interpret uninitialized global data as a
        different type of reference which behaves as described above.  We have
        explicitly initialized all of the global data to work around the
@@ -381,7 +471,7 @@ SUMMARY OF CONFIGURE OPTIONS:
        warning.  There will still be warnings due to subtle inconsistencies
        in the interface, but at a lower level.
 
        warning.  There will still be warnings due to subtle inconsistencies
        in the interface, but at a lower level.
 
-       NOTE:  configuring ncurses with this option may detract from the
+       NOTE: configuring ncurses with this option may detract from the
        portability of your applications by encouraging you to use const in
        places where the XSI curses interface would not allow them.  Similar
        issues arise when porting to SVr4 curses, which uses const in even
        portability of your applications by encouraging you to use const in
        places where the XSI curses interface would not allow them.  Similar
        issues arise when porting to SVr4 curses, which uses const in even
@@ -402,7 +492,7 @@ SUMMARY OF CONFIGURE OPTIONS:
        encoded.  This applies only to the wide-character (--enable-widec)
        configuration.
 
        encoded.  This applies only to the wide-character (--enable-widec)
        configuration.
 
-       NOTE:  using this option will make libraries which are not binary-
+       NOTE: using this option will make libraries which are not binary-
        compatible with libncursesw 5.4.  None of the interfaces change, but
        applications which have an array of cchar_t's must be recompiled.
 
        compatible with libncursesw 5.4.  None of the interfaces change, but
        applications which have an array of cchar_t's must be recompiled.
 
@@ -411,7 +501,7 @@ SUMMARY OF CONFIGURE OPTIONS:
        That allows one to use ncurses with a wheel mouse with xterm or
        similar X terminal emulators.
 
        That allows one to use ncurses with a wheel mouse with xterm or
        similar X terminal emulators.
 
-       NOTE:  using this option will make libraries which are not binary-
+       NOTE: using this option will make libraries which are not binary-
        compatible with libncursesw 5.4.  None of the interfaces change, but
        applications which have mouse mask mmask_t's must be recompiled.
 
        compatible with libncursesw 5.4.  None of the interfaces change, but
        applications which have mouse mask mmask_t's must be recompiled.
 
@@ -421,10 +511,17 @@ SUMMARY OF CONFIGURE OPTIONS:
        cross-references to) the terminfo tree, but it is faster than reading
        /etc/termcap.
 
        cross-references to) the terminfo tree, but it is faster than reading
        /etc/termcap.
 
+       If configured for one of the *BSD systems, this automatically uses
+       the hashed database system produced using cap_mkdb or similar tools.
+       In that case, there is no advantage in using the --enable-getcap-cache
+       option.
+
+       See also the --with-hashed-db option.
+
     --enable-getcap-cache
        Cache translated termcaps under the directory $HOME/.terminfo
 
     --enable-getcap-cache
        Cache translated termcaps under the directory $HOME/.terminfo
 
-       NOTE:  this sounds good - it makes ncurses run faster the second time.
+       NOTE: this sounds good - it makes ncurses run faster the second time.
        But look where the data comes from - an /etc/termcap containing lots of
        entries that are not up to date.  If you configure with this option and
        forget to install the terminfo database before running an ncurses
        But look where the data comes from - an /etc/termcap containing lots of
        entries that are not up to date.  If you configure with this option and
        forget to install the terminfo database before running an ncurses
@@ -437,16 +534,54 @@ SUMMARY OF CONFIGURE OPTIONS:
        may not be accurate, or that your stty settings have disabled the use
        of tabs.
 
        may not be accurate, or that your stty settings have disabled the use
        of tabs.
 
+    --enable-interop
+       Compile-in experimental interop bindings.  These provide generic types
+       for the form-library.
+
+    --enable-mixed-case
+       Controls whether the filesystem on which the terminfo database resides
+       supports mixed-case filenames (normal for UNIX, but not on other
+       systems).  If you do not specify this option, the configure script
+       checks the current filesystem.
+
     --enable-no-padding
        Compile-in support for the $NCURSES_NO_PADDING environment variable,
        which allows you to suppress the effect of non-mandatory padding in
        terminfo entries.  This is the default, unless you have disabled the
        extended functions.
 
     --enable-no-padding
        Compile-in support for the $NCURSES_NO_PADDING environment variable,
        which allows you to suppress the effect of non-mandatory padding in
        terminfo entries.  This is the default, unless you have disabled the
        extended functions.
 
+    --enable-pc-files
+       If pkg-config is found (see --with-pkg-config), generate ".pc" files
+       for each of the libraries, and install them in pkg-config's library
+       directory.
+
+    --enable-pthreads-eintr
+       add logic in threaded configuration to ensure that a read(2) system
+       call can be interrupted for SIGWINCH.
+
+    --enable-reentrant
+       Compile experimental configuration which improves reentrant use of the
+       library by reducing global and static variables.  This option is also
+       set if --with-pthread is used.
+
+       Enabling this option adds a "t" to the library names, except for the
+       special case when --enable-weak-symbols is also used.
+
     --enable-rpath
     --enable-rpath
-       Use rpath option when generating shared libraries, and with some
-       restrictions when linking the corresponding programs.  This applies
-       mainly to systems using the GNU linker (read the manpage).
+       Use rpath option when generating shared libraries, and (with some
+       restrictions) when linking the corresponding programs.  This originally
+       (in 1997) applied mainly to systems using the GNU linker (read the
+       manpage).
+
+       More recently it is useful for systems that require special treatment
+       shared libraries in "unusual" locations.  The "system" libraries reside
+       in directories which are on the loader's default search-path.  While
+       you may be able to use workarounds such as the $LD_LIBRARY_PATH
+       environment variable, they do not work with setuid applications since
+       the LD_LIBRARY_PATH variable would be unset in that situation.
+
+       This option does not apply to --with-libtool, since libtool makes
+       extra assumptions about rpath.
 
     --enable-safe-sprintf
        Compile with experimental safe-sprintf code.  You may consider using
 
     --enable-safe-sprintf
        Compile with experimental safe-sprintf code.  You may consider using
@@ -460,6 +595,26 @@ SUMMARY OF CONFIGURE OPTIONS:
        changes.  This option is the default, unless you have disabled the
        extended functions.
 
        changes.  This option is the default, unless you have disabled the
        extended functions.
 
+    --enable-signed-char
+       The term.h header declares a Booleans[] array typed "char".  But it
+       stores signed values there and "char" is not necessarily signed.
+       Some packagers choose to alter the type of Booleans[] though this
+       is not strictly compatible.  This option allows one to implement this
+       alteration without patching the source code.
+
+    --enable-sp-funcs
+       Compile-in support for extended functions which accept a SCREEN pointer,
+       reducing the need for juggling the global SP value with set_term() and
+       delscreen().
+
+    --enable-string-hacks
+       Controls whether strlcat and strlcpy may be used.  The same issue
+       applies to OpenBSD's warnings about snprintf, noting that this function
+       is weakly standardized.
+
+       Aside from stifling these warnings, there is no functional improvement
+       in ncurses.
+
     --enable-symlinks
        If your system supports symbolic links, make tic use symbolic links
        rather than hard links to save diskspace when writing aliases in the
     --enable-symlinks
        If your system supports symbolic links, make tic use symbolic links
        rather than hard links to save diskspace when writing aliases in the
@@ -471,14 +626,35 @@ SUMMARY OF CONFIGURE OPTIONS:
        capabilities as user-defined strings.  This option is the default,
        unless you have disabled the extended functions.
 
        capabilities as user-defined strings.  This option is the default,
        unless you have disabled the extended functions.
 
+    --enable-term-driver
+       Enable experimental terminal-driver.  This is currently used for the
+       MinGW port, by providing a way to substitute the low-level terminfo
+       library with different terminal drivers.
+
     --enable-termcap
        Compile in support for reading terminal descriptions from termcap if no
        match is found in the terminfo database.  See also the --enable-getcap
        and --enable-getcap-cache options.
 
     --enable-termcap
        Compile in support for reading terminal descriptions from termcap if no
        match is found in the terminfo database.  See also the --enable-getcap
        and --enable-getcap-cache options.
 
+       Termcap support requires run-time parsing rather than loading
+       predigested data.  If you have specified --with-ticlib, then you
+       cannot have termcap support since run-time parsing is done in the
+       tic library, which is intentionally not part of normal linkage
+       dependencies.
+
     --enable-warnings
        Turn on GCC compiler warnings.  There should be only a few.
 
     --enable-warnings
        Turn on GCC compiler warnings.  There should be only a few.
 
+    --enable-weak-symbols
+       If the --with-pthread option is set, check if the compiler supports
+       weak-symbols.  If it does, then name the thread-capable library without
+       the "t" (libncurses rather than libncursest), and provide for
+       dynamically loading the pthreads entrypoints at runtime.  This allows
+       one to reduce the number of library files for ncurses.
+
+    --enable-wgetch-events
+       Compile with experimental wgetch-events code.  See ncurses/README.IZ
+
     --enable-widec
        Compile with wide-character code.  This makes a different version of
        the libraries (e.g., libncursesw.so), which stores characters as
     --enable-widec
        Compile with wide-character code.  This makes a different version of
        the libraries (e.g., libncursesw.so), which stores characters as
@@ -502,6 +678,9 @@ SUMMARY OF CONFIGURE OPTIONS:
        Normally this is the same as the release version; some ports have
        special requirements for compatibility.
 
        Normally this is the same as the release version; some ports have
        special requirements for compatibility.
 
+       This option does not affect linking with libtool, which uses the
+       release major/minor numbers.
+
     --with-ada-compiler=CMD
        Specify the Ada95 compiler command (default "gnatmake")
 
     --with-ada-compiler=CMD
        Specify the Ada95 compiler command (default "gnatmake")
 
@@ -512,12 +691,23 @@ SUMMARY OF CONFIGURE OPTIONS:
     --with-ada-objects=DIR
        Tell where to install the Ada objects (default:  PREFIX/lib/ada/adalib)
 
     --with-ada-objects=DIR
        Tell where to install the Ada objects (default:  PREFIX/lib/ada/adalib)
 
+    --with-ada-sharedlib
+       Build a shared library for Ada95 binding, if the compiler permits.
+
+       NOTE: You must also set the --with-shared option on some platforms
+       for a successful build.  You need not use this option when you set
+       --with-shared, unless you want to use the Ada shared library.
+
     --with-bool=TYPE
        If --without-cxx is specified, override the type used for the "bool"
        declared in curses.h (normally the type is automatically chosen to
        correspond with that in <stdbool.h>, or defaults to platform-specific
        sizes).
 
     --with-bool=TYPE
        If --without-cxx is specified, override the type used for the "bool"
        declared in curses.h (normally the type is automatically chosen to
        correspond with that in <stdbool.h>, or defaults to platform-specific
        sizes).
 
+    --with-build-cpp=XXX
+       This option is provided by the same macro used for $BUILD_CC, etc.,
+       but is not directly used by ncurses.
+
     --with-build-cc=XXX
        If cross-compiling, specify a host C compiler, which is needed to
        compile a few utilities which generate source modules for ncurses.
     --with-build-cc=XXX
        If cross-compiling, specify a host C compiler, which is needed to
        compile a few utilities which generate source modules for ncurses.
@@ -529,20 +719,32 @@ SUMMARY OF CONFIGURE OPTIONS:
        to do this if the target compiler has unusual flags which confuse the
        host compiler.
 
        to do this if the target compiler has unusual flags which confuse the
        host compiler.
 
+       You can also set the environment variable $BUILD_CFLAGS rather than
+       use this option.
+
     --with-build-cppflags=XXX
        If cross-compiling, specify the host C preprocessor-flags.  You might
        need to do this if the target compiler has unusual flags which confuse
        the host compiler.
 
     --with-build-cppflags=XXX
        If cross-compiling, specify the host C preprocessor-flags.  You might
        need to do this if the target compiler has unusual flags which confuse
        the host compiler.
 
+       You can also set the environment variable $BUILD_CPPFLAGS rather than
+       use this option.
+
     --with-build-ldflags=XXX
        If cross-compiling, specify the host linker-flags.  You might need to
        do this if the target linker has unusual flags which confuse the host
        compiler.
 
     --with-build-ldflags=XXX
        If cross-compiling, specify the host linker-flags.  You might need to
        do this if the target linker has unusual flags which confuse the host
        compiler.
 
+       You can also set the environment variable $BUILD_LDFLAGS rather than
+       use this option.
+
     --with-build-libs=XXX
        If cross-compiling, the host libraries.  You might need to do this if
        the target environment requires unusual libraries.
 
     --with-build-libs=XXX
        If cross-compiling, the host libraries.  You might need to do this if
        the target environment requires unusual libraries.
 
+       You can also set the environment variable $BUILD_LIBS rather than
+       use this option.
+
     --with-caps=XXX
        Specify an alternate terminfo capabilities file, which makes the
        configure script look for "include/Caps.XXX".  A few systems, e.g.,
     --with-caps=XXX
        Specify an alternate terminfo capabilities file, which makes the
        configure script look for "include/Caps.XXX".  A few systems, e.g.,
@@ -552,12 +754,23 @@ SUMMARY OF CONFIGURE OPTIONS:
        to use a terminfo database which is compatible with the native
        applications.
 
        to use a terminfo database which is compatible with the native
        applications.
 
+    --with-ccharw-max=XXX
+       Override the size of the wide-character array in cchar_t structures.
+       Changing this will alter the binary interface.  This defaults to 5.
+
     --with-chtype=TYPE
        Override type of chtype, which stores the video attributes and (if
        --enable-widec is not given) a character.  Prior to ncurses 5.5, this
        was always unsigned long, but with ncurses 5.5, it may be unsigned.
        Use this option if you need to preserve compatibility with 64-bit
     --with-chtype=TYPE
        Override type of chtype, which stores the video attributes and (if
        --enable-widec is not given) a character.  Prior to ncurses 5.5, this
        was always unsigned long, but with ncurses 5.5, it may be unsigned.
        Use this option if you need to preserve compatibility with 64-bit
-       executables.
+       executables, e.g., by setting "--with-chtype=long" (the configure
+       script supplies "unsigned").
+
+    --with-cxx-shared
+       When --with-shared is set, build libncurses++ as a shared library.
+       This implicitly relies upon building with gcc/g++, since other
+       compiler suites may have differences in the way shared libraries are
+       built.  libtool by the way has similar limitations.
 
     --with-database=XXX
        Specify the terminfo source file to install.  Usually you will wish
 
     --with-database=XXX
        Specify the terminfo source file to install.  Usually you will wish
@@ -567,6 +780,7 @@ SUMMARY OF CONFIGURE OPTIONS:
 
     --with-dbmalloc
        For testing, compile and link with Conor Cahill's dbmalloc library.
 
     --with-dbmalloc
        For testing, compile and link with Conor Cahill's dbmalloc library.
+       This also sets the --disable-leaks option.
 
     --with-debug
        Generate debug-libraries (default).  These are named by adding "_g"
 
     --with-debug
        Generate debug-libraries (default).  These are named by adding "_g"
@@ -576,12 +790,9 @@ SUMMARY OF CONFIGURE OPTIONS:
        Specify the default terminfo database directory.  This is normally
        DATADIR/terminfo, e.g., /usr/share/terminfo.
 
        Specify the default terminfo database directory.  This is normally
        DATADIR/terminfo, e.g., /usr/share/terminfo.
 
-    --with-develop
-       Enable experimental/development options.  This does not count those
-       that change the interface, such as --enable-widec.
-
     --with-dmalloc
        For testing, compile and link with Gray Watson's dmalloc library.
     --with-dmalloc
        For testing, compile and link with Gray Watson's dmalloc library.
+       This also sets the --disable-leaks option.
 
     --with-fallbacks=XXX
        Specify a list of fallback terminal descriptions which will be
 
     --with-fallbacks=XXX
        Specify a list of fallback terminal descriptions which will be
@@ -589,10 +800,54 @@ SUMMARY OF CONFIGURE OPTIONS:
 
     --with-gpm
        use Alessandro Rubini's GPM library to provide mouse support on the
 
     --with-gpm
        use Alessandro Rubini's GPM library to provide mouse support on the
-       Linux console.  Prior to ncurses 5.5, this introduced a dependency
-       on the GPM library.  Currently ncurses uses the dlsym() function to
-       bind to the at runtime, so it is only necessary that the library be
-       present when ncurses is built.
+       Linux console.  Prior to ncurses 5.5, this introduced a dependency on
+       the GPM library.
+
+       Currently ncurses uses the dlsym() function to bind to the library at
+       runtime, so it is only necessary that the library be present when
+       ncurses is built, to obtain the filename (or soname) used in the
+       corresponding dlopen() call.  If you give a value for this option,
+       e.g.,
+
+               --with-gpm=$HOME/tmp/test-gpm.so
+
+       that overrides the configure check for the soname.
+
+       See also --without-dlsym
+
+    --with-hashed-db[=XXX]
+       Use a hashed database for storing terminfo data rather than storing
+       each compiled entry in a separate binary file within a directory
+       tree.
+
+       In particular, this uses the Berkeley database 1.8.5 interface, as
+       provided by that and its successors db 2, 3, and 4.  The actual
+       interface is slightly different in the successor versions of the
+       Berkeley database.  The database should have been configured using
+       "--enable-compat185".
+
+       If you use this option for configuring ncurses, tic will only be able
+       to write entries in the hashed database.  infocmp can still read
+       entries from a directory tree as well as reading entries from the
+       hashed database.  To do this, infocmp determines whether the $TERMINFO
+       variable points to a directory or a file, and reads the directory-tree
+       or hashed database respectively.
+
+       You cannot have a directory containing both hashed-database and
+       filesystem-based terminfo entries.
+
+       Use the parameter value to give the install-prefix used for the
+       database, e.g.,
+               --with-hashed-db=/usr/local/BigBase
+       to find the corresponding include- and lib-directories under the
+       given directory.  Alternatively, you can specify a directory leaf
+       name, e.g., 
+               --with-hashed-db=db4
+       to make the configure script look for files in a subdirectory such as
+               /usr/include/db4/db.h
+               /usr/lib/db4/libdb.so
+
+       See also the --enable-getcap option.
 
     --with-install-prefix=XXX
        Allows you to specify an alternate location for installing ncurses
 
     --with-install-prefix=XXX
        Allows you to specify an alternate location for installing ncurses
@@ -603,10 +858,20 @@ SUMMARY OF CONFIGURE OPTIONS:
                make install DESTDIR=XXX
        since the makefiles pass that variable to subordinate makes.
 
                make install DESTDIR=XXX
        since the makefiles pass that variable to subordinate makes.
 
-       NOTE:  a few systems build shared libraries with fixed pathnames; this
+       NOTE: a few systems build shared libraries with fixed pathnames; this
        option probably will not work for those configurations.
 
        option probably will not work for those configurations.
 
-     --with-libtool[=XXX]
+    --with-lib-prefix=XXX
+       OS/2 EMX used a different naming convention from most Unix-like
+       platforms.  It required that the "lib" part of a library name was
+       omitted.  Newer EMX as part of eComStation does not follow that
+       convention.  Use this option to override the configure script's
+       assumptions about the library-prefix.  If this option is omitted, it
+       uses the original OS/2 EMX convention for that platform.  Use
+       "--with-lib-prefix=lib" for the newer EMX in eComStation.  Use
+       "--without-lib-prefix" to suppress it for other odd platforms.
+
+    --with-libtool[=XXX]
        Generate libraries with libtool.  If this option is selected, then it
        overrides all other library model specifications.  Note that libtool
        must already be installed, uses makefile rules dependent on GNU make,
        Generate libraries with libtool.  If this option is selected, then it
        overrides all other library model specifications.  Note that libtool
        must already be installed, uses makefile rules dependent on GNU make,
@@ -640,9 +905,9 @@ SUMMARY OF CONFIGURE OPTIONS:
 
     --with-manpage-renames=XXX
        Tell the configure script that you wish to rename the manpages while
 
     --with-manpage-renames=XXX
        Tell the configure script that you wish to rename the manpages while
-       installing.  Currently the only distribution which does this is
-       the Linux Debian.  The option value specifies the name of a file
-       that lists the renamed files, e.g., $srcdir/man/man_db.renames
+       installing.  Currently the only distribution which does this is Debian.
+       The option value specifies the name of a file that lists the renamed
+       files, e.g., $srcdir/man/man_db.renames
 
     --with-manpage-symlinks
        Tell the configure script that you wish to make symbolic links in the
 
     --with-manpage-symlinks
        Tell the configure script that you wish to make symbolic links in the
@@ -662,6 +927,14 @@ SUMMARY OF CONFIGURE OPTIONS:
        may be unsigned.  Use this option if you need to preserve compatibility
        with 64-bit executables.
 
        may be unsigned.  Use this option if you need to preserve compatibility
        with 64-bit executables.
 
+    --with-normal
+       Generate normal (i.e., static) libraries (default).
+
+       Note:  on Linux, the configure script will attempt to use the GPM
+       library via the dlsym() function call.  Use --without-dlsym to disable
+       this feature, or --without-gpm, depending on whether you wish to use
+       GPM.
+
     --with-ospeed=TYPE
        Override type of ospeed variable, which is part of the termcap
        compatibility interface.  In termcap, this is a 'short', which works
     --with-ospeed=TYPE
        Override type of ospeed variable, which is part of the termcap
        compatibility interface.  In termcap, this is a 'short', which works
@@ -675,13 +948,22 @@ SUMMARY OF CONFIGURE OPTIONS:
        those using termcap, do not use the higher speeds.  Your application
        (or system, in general) may or may not.
 
        those using termcap, do not use the higher speeds.  Your application
        (or system, in general) may or may not.
 
-    --with-normal
-       Generate normal (i.e., static) libraries (default).
+    --with-pkg-config=[DIR]
+       Check for pkg-config, optionally specifying its path.
+
+    --with-pkg-config-libdir=[DIR]
+       If pkg-config was found, override the automatic check for its library
+       path.
 
     --with-profile
        Generate profile-libraries These are named by adding "_p" to the root,
        e.g., libncurses_p.a
 
 
     --with-profile
        Generate profile-libraries These are named by adding "_p" to the root,
        e.g., libncurses_p.a
 
+    --with-pthread
+       Link with POSIX threads, set --enable-reentrant.  The use_window() and
+       use_screen() functions will use mutex's, allowing rudimentary support
+       for multithreaded applications.
+
     --with-rcs-ids
        Compile-in RCS identifiers.  Most of the C files have an identifier.
 
     --with-rcs-ids
        Compile-in RCS identifiers.  Most of the C files have an identifier.
 
@@ -696,7 +978,7 @@ SUMMARY OF CONFIGURE OPTIONS:
        which you are building, typically using a ".so" suffix, along with
        symbolic links that refer to the release version.
 
        which you are building, typically using a ".so" suffix, along with
        symbolic links that refer to the release version.
 
-       NOTE:  Unless you override the configure script by setting the $CFLAGS
+       NOTE: Unless you override the configure script by setting the $CFLAGS
        environment variable, these will not be built with the -g debugging
        option.
 
        environment variable, these will not be built with the -g debugging
        option.
 
@@ -705,10 +987,26 @@ SUMMARY OF CONFIGURE OPTIONS:
        shared libraries, you may encounter problems with the linker.
        For example, it may prevent you from running  the build tree's
        copy of tic (for installing the terminfo database) because it
        shared libraries, you may encounter problems with the linker.
        For example, it may prevent you from running  the build tree's
        copy of tic (for installing the terminfo database) because it
-       loads the system's copy of the ncurses shared libraries.  In that
-       case, using the misc/shlib script may be helpful, since it sets
-       $LD_LIBRARY_PATH to point to the build tree, e.g.,
-               ./misc/shlib make install       
+       loads the system's copy of the ncurses shared libraries.
+       
+       In that case, using the misc/shlib script may be helpful, since it
+       sets $LD_LIBRARY_PATH to point to the build tree, e.g.,
+
+               ./misc/shlib make install
+
+       Alternatively, for most platforms, the linker accepts a list of
+       directories which will be searched for libraries at run-time.  The
+       configure script allows you to modify this list using the
+       RPATH_LIST environment variable.  It is a colon-separated list of
+       directories (default:  the "libdir" set via the configure script).
+       If you set that to put "../lib" first in the list, the linker will
+       look first at the build-directory, and avoid conflict with libraries
+       already installed.  One drawback to this approach is that libraries
+       can be accidentally searched in any "../lib" directory.
+
+       NOTE: If you use the --with-ada-sharedlib option, you should also
+       set this option, to ensure that C-language modules needed for the
+       Ada binding use appropriate compiler options.
 
     --with-shlib-version=XXX
        Specify whether to use the release or ABI version for shared libraries.
 
     --with-shlib-version=XXX
        Specify whether to use the release or ABI version for shared libraries.
@@ -746,10 +1044,57 @@ SUMMARY OF CONFIGURE OPTIONS:
        Specify a search-list of termcap files which will be compiled into the
        ncurses library (default:  /etc/termcap:/usr/share/misc/termcap)
 
        Specify a search-list of termcap files which will be compiled into the
        ncurses library (default:  /etc/termcap:/usr/share/misc/termcap)
 
+    --with-ticlib[=XXX]
+       When building the ncurses library, build a separate library for
+       the modules that are used only by the utility programs.  Normally
+       those would be bundled with the termlib or ncurses libraries.
+
+       If an option value is given, that overrides the name of the tic
+       library.  As in termlib, there is no ABI difference between the
+       "wide" libticw.so and libtic.so
+
+       NOTE: Overriding the name of the tic library may be useful if you are
+       also using the --with-termlib option to rename libtinfo.  If you are
+       not doing that, renaming the tic library can result in conflicting
+       library dependencies for tic and other programs built with the tic
+       library.
+
+    --with-tparm-arg[=XXX]
+       Override the type used for tparm() arguments, which normally is a
+       "long".  However the function must assume that its arguments can hold a
+       pointer to char's which is not always workable for 64-bit platforms.  A
+       better choice would be intptr_t, which was not available at the time
+       tparm's interface was defined.
+
+       If the option is not given, this defaults to "long".
+
     --with-trace
        Configure the trace() function as part of the all models of the ncurses
        library.  Normally it is part of the debug (libncurses_g) library only.
 
     --with-trace
        Configure the trace() function as part of the all models of the ncurses
        library.  Normally it is part of the debug (libncurses_g) library only.
 
+    --with-xterm-kbs=XXX
+       Configure xterm's terminfo entries to use either BS (^H, i.e., ASCII
+       backspace) or DEL (^?, or 127).  XXX can be BS (or bs, 8) or DEL
+       (or del, 127).
+
+       During installation, the makefile and scripts modifies the "xterm+kbs"
+       terminfo entry to use this setting.
+
+    --with-valgrind
+       For testing, compile with debug option.
+       This also sets the --disable-leaks option.
+
+    --with-wrap-prefix=XXX
+       When using the --enable-reentrant option, ncurses redefines variables
+       that would be global in curses, e.g., LINES, as a macro that calls a
+       "wrapping" function which fetches the data from the current SCREEN
+       structure.  Normally that function is named by prepending "_nc_" to the
+       variable's name.  The function is technically private (since portable
+       applications would not refer directly to it).  But according to one
+       line of reasoning, it is not the same type of "private" as functions
+       which applications should not call even via a macro.  This configure
+       option lets you choose the prefix for these wrapped variables.
+
     --without-ada
        Suppress the configure script's check for Ada95, do not build the
        Ada95 binding and related demo.
     --without-ada
        Suppress the configure script's check for Ada95, do not build the
        Ada95 binding and related demo.
@@ -759,6 +1104,8 @@ SUMMARY OF CONFIGURE OPTIONS:
        install as "ncurses.h" and modify the installed headers and manpages
        accordingly.
 
        install as "ncurses.h" and modify the installed headers and manpages
        accordingly.
 
+       Likewise, do not install an alias "curses" for the ncurses manpage.
+
     --without-cxx
        XSI curses declares "bool" as part of the interface.  C++ also declares
        "bool".  Neither specifies the size and type of booleans, but both
     --without-cxx
        XSI curses declares "bool" as part of the interface.  C++ also declares
        "bool".  Neither specifies the size and type of booleans, but both
@@ -772,11 +1119,25 @@ SUMMARY OF CONFIGURE OPTIONS:
        Suppress the configure script's check for C++, do not build the
        C++ binding and related demo.
 
        Suppress the configure script's check for C++, do not build the
        C++ binding and related demo.
 
+    --without-develop
+       Disable development options.  This does not include those that change
+       the interface, such as --enable-widec.
+
+    --without-dlsym
+       Do not use dlsym() to load GPM dynamically.
+
+    --without-manpages
+       Tell the configure script to suppress the install of ncurses' manpages.
+
     --without-progs
        Tell the configure script to suppress the build of ncurses' application
        programs (e.g., tic).  The test applications will still be built if you
        type "make", though not if you simply do "make install".
 
     --without-progs
        Tell the configure script to suppress the build of ncurses' application
        programs (e.g., tic).  The test applications will still be built if you
        type "make", though not if you simply do "make install".
 
+    --without-tests
+       Tell the configure script to suppress the build of ncurses' test
+       programs.
+
     --without-xterm-new
        Tell the configure script to use "xterm-old" for the entry used in
        the terminfo database.  This will work with variations such as
     --without-xterm-new
        Tell the configure script to use "xterm-old" for the entry used in
        the terminfo database.  This will work with variations such as
@@ -798,6 +1159,203 @@ COMPATIBILITY WITH OLDER VERSIONS OF NCURSES:
     you may encounter when building a system with different versions of
     ncurses:
 
     you may encounter when building a system with different versions of
     ncurses:
 
+    5.8 (Feb 26, 2011)
+       Interface changes:
+
+       + add an alternate library configuration, i.e., "terminal driver" to
+         support port to Windows, built with MinGW.  There are two drivers
+         (terminfo and Windows console).  The terminfo driver works on other
+         platforms.
+
+       + add a new set of functions which accept a SCREEN* parameter, in
+         contrast with the original set which use the global value "sp".
+         By default, these names end with "_sp", and are otherwise
+         functionally identical with the originals.
+
+         In addition to the "_sp" functions, there are a few new functions
+         associated with this feature:  ceiling_panel, ground_panel,
+         new_prescr.
+
+         If the library is not built with the sp-funcs extension, there
+         are no related interface changes.
+
+       + add tiparm function based on review of X/Open Curses Issue 7.
+
+       + change internal _nc_has_mouse function to public has_mouse function
+
+       Added extensions:
+
+       + add a few more functions to support the NCURSES_OPAQUE feature:
+         get_escdelay, is_pad, is_subwin
+
+       Added internal functions (other than "_sp" variants):
+               _nc_curscr_of
+               _nc_format_slks
+               _nc_get_alias_table
+               _nc_get_hash_info
+               _nc_insert_wch
+               _nc_newscr_of
+               _nc_outc_wrapper
+               _nc_retrace_char
+               _nc_retrace_int_attr_t
+               _nc_retrace_mmask_t
+               _nc_setup_tinfo
+               _nc_stdscr_of
+               _nc_tinfo_cmdch
+
+       Removed internal functions:
+               _nc_makenew (some configurations replace by _nc_makenew_sp)
+
+       Modified internal functions:
+               _nc_UpdateAttrs
+               _nc_get_hash_table
+               _nc_has_mouse
+               _nc_insert_ch
+               _nc_wgetch
+
+    5.7 (November 2, 2008)
+       Interface changes:
+
+       + generate linkable stubs for some macros:
+               getattrs
+
+       + Add new library configuration for tic-library (the non-curses portion
+         of the ncurses library used for the tic program as well as some
+         others such as tack.  There is no API change, but makefiles would be
+         changed to use the tic-library built separately.
+
+         tack, distributed separately from ncurses, uses some of the internal
+         _nc_XXX functions, which are declared in the tic.h header file.
+
+         The reason for providing this separate library is that none of the
+         functions in it are suitable for threaded applications.
+
+       + Add new library configuration (ncursest, ncurseswt) which provides
+         rudimentary support for POSIX threads.  This introduces opaque
+         access functions to the WINDOW structure and adds a parameter to
+         several internal functions.
+
+       + move most internal variables (except tic-library) into data blocks
+         _nc_globals and _nc_prescreen to simplify analysis.  Those were
+         globally accessible, but since they were not part of the documented
+         API, there is no ABI change.
+
+       + changed static tables of strings to be indices into long strings, to
+         improve startup performance.  This changes parameter lists for some
+         of the internal functions.
+
+       Added extensions:
+
+       + add NCURSES_OPAQUE definition in curses.h to control whether internal
+         details of the WINDOW structure are visible to an application.  This
+         is always defined when the threaded library is built, and is optional
+         otherwise.  New functions for this:  is_cleared, is_idcok, is_idlok,
+         is_immedok, is_keypad, is_leaveok, is_nodelay, is_notimeout,
+         is_scrollok, is_syncok, wgetparent and wgetscrreg.
+
+       + the threaded library (ncursest) also disallows direct updating of
+         global curses-level variables, providing functions (via macros) for
+         obtaining their value.  A few of those variables can be modified by
+         the application, using new functions:  set_escdelay, set_tabsize
+
+       + added functions use_window() and use_screen() which wrap a mutex
+         (if threading is configured) around a call to a user-supplied
+         function.
+
+       Added internal functions:
+               _nc_get_alias_table
+               _nc_get_screensize
+               _nc_keyname
+               _nc_screen_of
+               _nc_set_no_padding
+               _nc_tracechar
+               _nc_tracemouse
+               _nc_unctrl
+               _nc_ungetch
+
+               These are used for leak-testing, and are stubs for
+               ABI compatibility when ncurses is not configured for that
+               using the --disable-leaks configure script option:
+
+               _nc_free_and_exit
+               _nc_leaks_tinfo
+
+       Removed internal functions:
+               none
+
+       Modified internal functions:
+               _nc_fifo_dump
+               _nc_find_entry
+               _nc_handle_sigwinch
+               _nc_init_keytry
+               _nc_keypad
+               _nc_locale_breaks_acs
+               _nc_timed_wait
+               _nc_update_screensize
+
+               Use new typedef TRIES to replace "struct tries":
+
+               _nc_add_to_try
+               _nc_expand_try
+               _nc_remove_key
+               _nc_remove_string
+               _nc_trace_tries
+
+    5.6 (December 17, 2006)
+       Interface changes:
+
+       + generate linkable stubs for some macros:
+
+         getbegx, getbegy, getcurx, getcury, getmaxx, getmaxy, getparx,
+         getpary, getpary,
+
+         and (for libncursesw)
+
+         wgetbkgrnd
+
+       Added extensions:
+               nofilter()
+               use_legacy_coding()
+
+       Added internal functions:
+               _nc_first_db
+               _nc_get_source
+               _nc_handle_sigwinch
+               _nc_is_abs_path
+               _nc_is_dir_path
+               _nc_is_file_path
+               _nc_keep_tic_dir
+               _nc_keep_tic_dir
+               _nc_last_db
+               _nc_next_db
+               _nc_read_termtype
+               _nc_tic_dir
+
+               Also (if using the hashed database configuration):
+
+               _nc_db_close
+               _nc_db_first
+               _nc_db_get
+               _nc_db_have_data
+               _nc_db_have_index
+               _nc_db_next
+               _nc_db_open
+               _nc_db_put
+
+               otherwise
+
+               _nc_hashed_db
+
+       Removed internal functions:
+               none
+
+       Modified internal functions:
+               _nc_add_to_try
+               _nc_do_color
+               _nc_expand_try
+               _nc_remove_key
+               _nc_setupscreen
+
     5.5 (October 10, 2005)
        Interface changes:
 
     5.5 (October 10, 2005)
        Interface changes:
 
@@ -812,7 +1370,7 @@ COMPATIBILITY WITH OLDER VERSIONS OF NCURSES:
          still used in this release to allow compiling with not-so-old
          compilers.
 
          still used in this release to allow compiling with not-so-old
          compilers.
 
-       + form and menu libraries now work with wide-character data. 
+       + form and menu libraries now work with wide-character data.
          Applications which bypassed the form library and manipulated the
          FIELD.buf data directly will not work properly with libformw, since
          that no longer points to an array of char.  The set_field_buffer()
          Applications which bypassed the form library and manipulated the
          FIELD.buf data directly will not work properly with libformw, since
          that no longer points to an array of char.  The set_field_buffer()
@@ -1092,8 +1650,8 @@ COMPATIBILITY WITH OLDER VERSIONS OF NCURSES:
 
     4.0 (December 24, 1996)
 
 
     4.0 (December 24, 1996)
 
-       We bumped to version 4.0 because the newly released dynamic loader
-       (ld.so.1.8.5) on Linux did not load shared libraries whose ABI and REL
+       We bumped to version 4.0 because the newly released Linux dynamic
+       loader (ld.so.1.8.5) did not load shared libraries whose ABI and REL
        versions were inconsistent.  At that point, ncurses ABI was 3.4 and the
        REL was 1.9.9g, so we made them consistent.
 
        versions were inconsistent.  At that point, ncurses ABI was 3.4 and the
        REL was 1.9.9g, so we made them consistent.
 
@@ -1150,10 +1708,10 @@ IF YOU ARE A SYSTEM INTEGRATOR:
 
     Configuration and Installation:
 
 
     Configuration and Installation:
 
-       On platforms where ncurses is assumed to be installed in /usr/lib,
+       On platforms where ncurses is assumed to be installed in /usr/lib,
        the configure script uses "/usr" as a default:
 
        the configure script uses "/usr" as a default:
 
-               Linux, FreeBSD, NetBSD, OpenBSD, Cygwin
+               GNU/Linux, FreeBSD, NetBSD, OpenBSD, Cygwin
 
        For other platforms, the default is "/usr/local".  See the discussion
        of the "--disable-overwrite" option.
 
        For other platforms, the default is "/usr/local".  See the discussion
        of the "--disable-overwrite" option.
@@ -1216,7 +1774,7 @@ IF YOU ARE A SYSTEM INTEGRATOR:
                bsdos   -- BSD/OS
 
        If you are responsible for integrating ncurses for one of these
                bsdos   -- BSD/OS
 
        If you are responsible for integrating ncurses for one of these
-       distribution, please either use the recommended name or get back
+       distributions, please either use the recommended name or get back
        to us explaining why you don't want to, so we can work out nomenclature
        that will make users' lives easier rather than harder.
 
        to us explaining why you don't want to, so we can work out nomenclature
        that will make users' lives easier rather than harder.
 
@@ -1238,7 +1796,8 @@ CONFIGURING FALLBACK ENTRIES:
        tree is accessible (that is, in single-user mode or at OS installation
        time) the ncurses library can be compiled to include an array of
        pre-fetched fallback entries.  This must be done on a machine which
        tree is accessible (that is, in single-user mode or at OS installation
        time) the ncurses library can be compiled to include an array of
        pre-fetched fallback entries.  This must be done on a machine which
-       has ncurses' infocmp and terminfo database installed.
+       has ncurses' infocmp and terminfo database installed (as well as
+       ncurses' tic and infocmp programs).
 
        These entries are checked by setupterm() only when the conventional
        fetches from the terminfo tree and the termcap fallback (if configured)
 
        These entries are checked by setupterm() only when the conventional
        fetches from the terminfo tree and the termcap fallback (if configured)
@@ -1249,20 +1808,37 @@ CONFIGURING FALLBACK ENTRIES:
        By default, there are no entries on the fallback list.  After you have
        built the ncurses suite for the first time, you can change the list
        (the process needs infocmp(1)).  To do so, use the script
        By default, there are no entries on the fallback list.  After you have
        built the ncurses suite for the first time, you can change the list
        (the process needs infocmp(1)).  To do so, use the script
-       ncurses/tinfo/MKfallback.sh.  A configure script option
+       ncurses/tinfo/MKfallback.sh.  The configure script option
        --with-fallbacks does this (it accepts a comma-separated list of the
        names you wish, and does not require a rebuild).
 
        If you wanted (say) to have linux, vt100, and xterm fallbacks, you
        --with-fallbacks does this (it accepts a comma-separated list of the
        names you wish, and does not require a rebuild).
 
        If you wanted (say) to have linux, vt100, and xterm fallbacks, you
-       would use the commands
+       might use the commands
 
                cd ncurses;
 
                cd ncurses;
-               tinfo/MKfallback.sh linux vt100 xterm >fallback.c
+               tinfo/MKfallback.sh \
+                       $TERMINFO \
+                       ../misc/terminfo.src \
+                       `which tic` \
+                       linux vt100 xterm >fallback.c
+
+       The first three parameters of the script are normally supplied by
+       the configured makefiles via the "--with-fallbacks" option.  They
+       are
+
+               1) the location of the terminfo database
+               2) the source for the terminfo entries
+               3) the location of the tic program, used to create a terminfo
+                  database.
 
        Then just rebuild and reinstall the library as you would normally.
        You can restore the default empty fallback list with
 
 
        Then just rebuild and reinstall the library as you would normally.
        You can restore the default empty fallback list with
 
-               tinfo/MKfallback.sh >fallback.c
+               tinfo/MKfallback.sh \
+                       $TERMINFO \
+                       ../misc/terminfo.src \
+                       `which tic` \
+                       >fallback.c
 
        The overhead for an empty fallback list is one trivial stub function.
        Any non-empty fallback list is const-ed and therefore lives in sharable
 
        The overhead for an empty fallback list is one trivial stub function.
        Any non-empty fallback list is const-ed and therefore lives in sharable
@@ -1343,8 +1919,8 @@ USING NCURSES WITH AFS:
        with this by making tic use symbolic links.
 
 USING NCURSES WITH GPM:
        with this by making tic use symbolic links.
 
 USING NCURSES WITH GPM:
-       Ncurses 4.1 and up can be configured to use GPM (General Purpose
-       Mouse) which is used on Linux console.  Be aware that GPM is commonly
+       Ncurses 4.1 and up can be configured to use GPM (General Purpose Mouse)
+       which is used with Linux console.  Be aware that GPM is commonly
        installed as a shared library which contains a wrapper for the curses
        wgetch() function (libcurses.o).  Some integrators have simplified
        linking applications by combining all or part of libcurses.so into the
        installed as a shared library which contains a wrapper for the curses
        wgetch() function (libcurses.o).  Some integrators have simplified
        linking applications by combining all or part of libcurses.so into the
@@ -1389,6 +1965,10 @@ BUILDING NCURSES WITH A CROSS-COMPILER
        option), ncurses uses the development platform's tic to do the
        "make install.data" portion.
 
        option), ncurses uses the development platform's tic to do the
        "make install.data" portion.
 
+       The system's tic program is used to install the terminal database,
+       even for cross-compiles.  For best results, the tic program should
+       be from the most current version of ncurses.
+
 BUGS:
        Send any feedback to the ncurses mailing list at
        bug-ncurses@gnu.org. To subscribe send mail to
 BUGS:
        Send any feedback to the ncurses mailing list at
        bug-ncurses@gnu.org. To subscribe send mail to
@@ -1397,3 +1977,5 @@ BUGS:
 
        The Hacker's Guide in the doc directory includes some guidelines
        on how to report bugs in ways that will get them fixed most quickly.
 
        The Hacker's Guide in the doc directory includes some guidelines
        on how to report bugs in ways that will get them fixed most quickly.
+
+-- vile:txtmode