+fi
+echo "$as_me:10586: result: $ac_cv_sys_largefile_CC" >&5
+echo "${ECHO_T}$ac_cv_sys_largefile_CC" >&6
+ if test "$ac_cv_sys_largefile_CC" != no; then
+ CC=$CC$ac_cv_sys_largefile_CC
+ fi
+
+ echo "$as_me:10592: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+echo $ECHO_N "checking for _FILE_OFFSET_BITS value needed for large files... $ECHO_C" >&6
+if test "${ac_cv_sys_file_offset_bits+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ while :; do
+ ac_cv_sys_file_offset_bits=no
+ cat >conftest.$ac_ext <<_ACEOF
+#line 10600 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:10620: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:10623: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:10626: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10629: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+#line 10638 "configure"
+#include "confdefs.h"
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:10659: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:10662: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:10665: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10668: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sys_file_offset_bits=64; break
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ break
+done
+fi
+echo "$as_me:10679: result: $ac_cv_sys_file_offset_bits" >&5
+echo "${ECHO_T}$ac_cv_sys_file_offset_bits" >&6
+if test "$ac_cv_sys_file_offset_bits" != no; then
+
+cat >>confdefs.h <<EOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+EOF
+
+fi
+rm -rf conftest*
+ echo "$as_me:10689: checking for _LARGE_FILES value needed for large files" >&5
+echo $ECHO_N "checking for _LARGE_FILES value needed for large files... $ECHO_C" >&6
+if test "${ac_cv_sys_large_files+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ while :; do
+ ac_cv_sys_large_files=no
+ cat >conftest.$ac_ext <<_ACEOF
+#line 10697 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:10717: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:10720: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:10723: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10726: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+#line 10735 "configure"
+#include "confdefs.h"
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:10756: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:10759: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:10762: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10765: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sys_large_files=1; break
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ break
+done
+fi
+echo "$as_me:10776: result: $ac_cv_sys_large_files" >&5
+echo "${ECHO_T}$ac_cv_sys_large_files" >&6
+if test "$ac_cv_sys_large_files" != no; then
+
+cat >>confdefs.h <<EOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+EOF
+
+fi
+rm -rf conftest*
+fi
+
+ if test "$enable_largefile" != no ; then
+ echo "$as_me:10789: checking for _LARGEFILE_SOURCE value needed for large files" >&5
+echo $ECHO_N "checking for _LARGEFILE_SOURCE value needed for large files... $ECHO_C" >&6
+if test "${ac_cv_sys_largefile_source+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ while :; do
+ ac_cv_sys_largefile_source=no
+ cat >conftest.$ac_ext <<_ACEOF
+#line 10797 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+int
+main ()
+{
+return !fseeko;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:10809: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:10812: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:10815: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10818: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+#line 10827 "configure"
+#include "confdefs.h"
+#define _LARGEFILE_SOURCE 1
+#include <stdio.h>
+int
+main ()
+{
+return !fseeko;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:10840: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:10843: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:10846: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10849: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_sys_largefile_source=1; break
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+ break
+done
+fi
+echo "$as_me:10860: result: $ac_cv_sys_largefile_source" >&5
+echo "${ECHO_T}$ac_cv_sys_largefile_source" >&6
+if test "$ac_cv_sys_largefile_source" != no; then
+
+cat >>confdefs.h <<EOF
+#define _LARGEFILE_SOURCE $ac_cv_sys_largefile_source
+EOF
+
+fi
+rm -rf conftest*
+
+# We used to try defining _XOPEN_SOURCE=500 too, to work around a bug
+# in glibc 2.1.3, but that breaks too many other things.
+# If you want fseeko and ftello with glibc, upgrade to a fixed glibc.
+echo "$as_me:10874: checking for fseeko" >&5
+echo $ECHO_N "checking for fseeko... $ECHO_C" >&6
+if test "${ac_cv_func_fseeko+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+#line 10880 "configure"
+#include "confdefs.h"
+#include <stdio.h>
+int
+main ()
+{
+return fseeko && fseeko (stdin, 0, 0);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:10892: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:10895: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:10898: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10901: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_fseeko=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+ac_cv_func_fseeko=no
+fi
+rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:10911: result: $ac_cv_func_fseeko" >&5
+echo "${ECHO_T}$ac_cv_func_fseeko" >&6
+if test $ac_cv_func_fseeko = yes; then
+
+cat >>confdefs.h <<\EOF
+#define HAVE_FSEEKO 1
+EOF
+
+fi
+
+ # Normally we would collect these definitions in the config.h,
+ # but (like _XOPEN_SOURCE), some environments rely on having these
+ # defined before any of the system headers are included. Another
+ # case comes up with C++, e.g., on AIX the compiler compiles the
+ # header files by themselves before looking at the body files it is
+ # told to compile. For ncurses, those header files do not include
+ # the config.h
+ test "$ac_cv_sys_large_files" != no && CPPFLAGS="$CPPFLAGS -D_LARGE_FILES "
+ test "$ac_cv_sys_largefile_source" != no && CPPFLAGS="$CPPFLAGS -D_LARGEFILE_SOURCE "
+ test "$ac_cv_sys_file_offset_bits" != no && CPPFLAGS="$CPPFLAGS -D_FILE_OFFSET_BITS=$ac_cv_sys_file_offset_bits "
+
+ echo "$as_me:10932: checking whether to use struct dirent64" >&5
+echo $ECHO_N "checking whether to use struct dirent64... $ECHO_C" >&6
+if test "${cf_cv_struct_dirent64+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+ cat >conftest.$ac_ext <<_ACEOF
+#line 10939 "configure"
+#include "confdefs.h"
+
+#include <sys/types.h>
+#include <dirent.h>
+
+int
+main ()
+{
+
+ /* if transitional largefile support is setup, this is true */
+ extern struct dirent64 * readdir(DIR *);
+ struct dirent64 *x = readdir((DIR *)0);
+ struct dirent *y = readdir((DIR *)0);
+ int z = x - y;
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:10960: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:10963: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:10966: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:10969: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cf_cv_struct_dirent64=yes
+else
+ echo "$as_me: failed program was:" >&5
+cat conftest.$ac_ext >&5
+cf_cv_struct_dirent64=no
+fi
+rm -f conftest.$ac_objext conftest.$ac_ext
+
+fi
+echo "$as_me:10980: result: $cf_cv_struct_dirent64" >&5
+echo "${ECHO_T}$cf_cv_struct_dirent64" >&6
+ test "$cf_cv_struct_dirent64" = yes &&
+cat >>confdefs.h <<\EOF
+#define HAVE_STRUCT_DIRENT64 1
+EOF
+
+ fi
+
+### use option --disable-tparm-varargs to make tparm() conform to X/Open
+echo "$as_me:10990: checking if you want tparm not to use X/Open fixed-parameter list" >&5
+echo $ECHO_N "checking if you want tparm not to use X/Open fixed-parameter list... $ECHO_C" >&6
+
+# Check whether --enable-tparm-varargs or --disable-tparm-varargs was given.
+if test "${enable_tparm_varargs+set}" = set; then
+ enableval="$enable_tparm_varargs"
+ with_tparm_varargs=$enableval
+else
+ with_tparm_varargs=yes
+fi;
+echo "$as_me:11000: result: $with_tparm_varargs" >&5
+echo "${ECHO_T}$with_tparm_varargs" >&6
+NCURSES_TPARM_VARARGS=0
+test "x$with_tparm_varargs" = xyes && NCURSES_TPARM_VARARGS=1
+
+### use option --disable-tic-depends to make libtic not explicitly depend on ncurses/ncursesw
+if test "$with_ticlib" != no ; then
+echo "$as_me:11007: checking if you want tic library to use explicit dependency on ncurses$LIB_SUFFIX library" >&5
+echo $ECHO_N "checking if you want tic library to use explicit dependency on ncurses$LIB_SUFFIX library... $ECHO_C" >&6
+
+# Check whether --enable-tic-depends or --disable-tic-depends was given.
+if test "${enable_tic_depends+set}" = set; then
+ enableval="$enable_tic_depends"
+ with_tic_depends=$enableval
+else
+ with_tic_depends=yes
+fi;
+echo "$as_me:11017: result: $with_tic_depends" >&5
+echo "${ECHO_T}$with_tic_depends" >&6
+else
+ with_tic_depends=no
+fi
+
+### use option --with-bool to override bool's type
+echo "$as_me:11024: checking for type of bool" >&5
+echo $ECHO_N "checking for type of bool... $ECHO_C" >&6
+
+# Check whether --with-bool or --without-bool was given.
+if test "${with_bool+set}" = set; then
+ withval="$with_bool"
+ NCURSES_BOOL="$withval"
+else
+ NCURSES_BOOL=auto
+fi;
+echo "$as_me:11034: result: $NCURSES_BOOL" >&5
+echo "${ECHO_T}$NCURSES_BOOL" >&6
+
+echo "$as_me:11037: checking for alternate terminal capabilities file" >&5
+echo $ECHO_N "checking for alternate terminal capabilities file... $ECHO_C" >&6
+
+# Check whether --with-caps or --without-caps was given.
+if test "${with_caps+set}" = set; then
+ withval="$with_caps"
+ TERMINFO_CAPS=Caps.$withval
+else
+ TERMINFO_CAPS=Caps
+fi;
+test -f "${srcdir}/include/${TERMINFO_CAPS}" || TERMINFO_CAPS=Caps
+echo "$as_me:11048: result: $TERMINFO_CAPS" >&5
+echo "${ECHO_T}$TERMINFO_CAPS" >&6
+
+### use option --with-chtype to override chtype's type
+echo "$as_me:11052: checking for type of chtype" >&5
+echo $ECHO_N "checking for type of chtype... $ECHO_C" >&6
+
+# Check whether --with-chtype or --without-chtype was given.
+if test "${with_chtype+set}" = set; then
+ withval="$with_chtype"
+ NCURSES_CHTYPE="$withval"
+else
+ NCURSES_CHTYPE=$cf_dft_chtype
+fi;
+echo "$as_me:11062: result: $NCURSES_CHTYPE" >&5
+echo "${ECHO_T}$NCURSES_CHTYPE" >&6
+
+### use option --with-ospeed to override ospeed's type
+echo "$as_me:11066: checking for type of ospeed" >&5
+echo $ECHO_N "checking for type of ospeed... $ECHO_C" >&6
+
+# Check whether --with-ospeed or --without-ospeed was given.
+if test "${with_ospeed+set}" = set; then
+ withval="$with_ospeed"
+ NCURSES_OSPEED="$withval"
+else
+ NCURSES_OSPEED=short
+fi;
+echo "$as_me:11076: result: $NCURSES_OSPEED" >&5
+echo "${ECHO_T}$NCURSES_OSPEED" >&6
+
+### use option --with-mmask-t to override mmask_t's type
+echo "$as_me:11080: checking for type of mmask_t" >&5
+echo $ECHO_N "checking for type of mmask_t... $ECHO_C" >&6
+
+# Check whether --with-mmask-t or --without-mmask-t was given.
+if test "${with_mmask_t+set}" = set; then
+ withval="$with_mmask_t"
+ NCURSES_MMASK_T="$withval"
+else
+ NCURSES_MMASK_T=$cf_dft_mmask_t
+fi;
+echo "$as_me:11090: result: $NCURSES_MMASK_T" >&5
+echo "${ECHO_T}$NCURSES_MMASK_T" >&6
+
+### use option --with-ccharw-max to override CCHARW_MAX size
+echo "$as_me:11094: checking for size CCHARW_MAX" >&5
+echo $ECHO_N "checking for size CCHARW_MAX... $ECHO_C" >&6
+
+# Check whether --with-ccharw-max or --without-ccharw-max was given.
+if test "${with_ccharw_max+set}" = set; then
+ withval="$with_ccharw_max"
+ NCURSES_CCHARW_MAX="$withval"
+else
+ NCURSES_CCHARW_MAX=5
+fi;
+echo "$as_me:11104: result: $NCURSES_CCHARW_MAX" >&5
+echo "${ECHO_T}$NCURSES_CCHARW_MAX" >&6
+
+### use option --with-tparm-arg to override tparm's argument type
+echo "$as_me:11108: checking for type of tparm args" >&5
+echo $ECHO_N "checking for type of tparm args... $ECHO_C" >&6
+
+# Check whether --with-tparm-arg or --without-tparm-arg was given.
+if test "${with_tparm_arg+set}" = set; then
+ withval="$with_tparm_arg"
+ NCURSES_TPARM_ARG="$withval"
+else
+ NCURSES_TPARM_ARG=$cf_dft_tparm_arg
+fi;
+echo "$as_me:11118: result: $NCURSES_TPARM_ARG" >&5
+echo "${ECHO_T}$NCURSES_TPARM_ARG" >&6
+
+### Enable compiling-in rcs id's
+echo "$as_me:11122: checking if RCS identifiers should be compiled-in" >&5
+echo $ECHO_N "checking if RCS identifiers should be compiled-in... $ECHO_C" >&6
+
+# Check whether --with-rcs-ids or --without-rcs-ids was given.
+if test "${with_rcs_ids+set}" = set; then
+ withval="$with_rcs_ids"
+ with_rcs_ids=$withval
+else
+ with_rcs_ids=no
+fi;
+echo "$as_me:11132: result: $with_rcs_ids" >&5
+echo "${ECHO_T}$with_rcs_ids" >&6
+test "x$with_rcs_ids" = xyes &&
+cat >>confdefs.h <<\EOF
+#define USE_RCS_IDS 1
+EOF
+
+###############################################################################
+
+echo "$as_me:11141: checking format of man-pages" >&5
+echo $ECHO_N "checking format of man-pages... $ECHO_C" >&6
+
+# Check whether --with-manpage-format or --without-manpage-format was given.
+if test "${with_manpage_format+set}" = set; then
+ withval="$with_manpage_format"
+ MANPAGE_FORMAT=$withval
+else
+ MANPAGE_FORMAT=unknown
+fi;
+
+test -z "$MANPAGE_FORMAT" && MANPAGE_FORMAT=unknown
+MANPAGE_FORMAT=`echo "$MANPAGE_FORMAT" | sed -e 's/,/ /g'`
+
+cf_unknown=
+
+case $MANPAGE_FORMAT in
+(unknown)
+ if test -z "$MANPATH" ; then
+ MANPATH="/usr/man:/usr/share/man"
+ fi
+
+ # look for the 'date' man-page (it's most likely to be installed!)
+ MANPAGE_FORMAT=
+ cf_preform=no
+ cf_catonly=yes
+ cf_example=date
+
+ IFS="${IFS:- }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+ for cf_dir in $MANPATH; do
+ test -z "$cf_dir" && cf_dir=/usr/man
+ for cf_name in $cf_dir/man*/$cf_example.[01]* $cf_dir/cat*/$cf_example.[01]* $cf_dir/man*/$cf_example $cf_dir/cat*/$cf_example
+ do
+ cf_test=`echo $cf_name | sed -e 's/*//'`
+ if test "x$cf_test" = "x$cf_name" ; then
+
+ case "$cf_name" in
+ (*.gz) MANPAGE_FORMAT="$MANPAGE_FORMAT gzip";;
+ (*.Z) MANPAGE_FORMAT="$MANPAGE_FORMAT compress";;
+ (*.0) MANPAGE_FORMAT="$MANPAGE_FORMAT BSDI";;
+ (*) MANPAGE_FORMAT="$MANPAGE_FORMAT normal";;
+ esac
+
+ case "$cf_name" in
+ ($cf_dir/man*)
+ cf_catonly=no
+ ;;
+ ($cf_dir/cat*)
+ cf_preform=yes
+ ;;
+ esac
+ break
+ fi
+
+ # if we found a match in either man* or cat*, stop looking
+ if test -n "$MANPAGE_FORMAT" ; then
+ cf_found=no
+ test "$cf_preform" = yes && MANPAGE_FORMAT="$MANPAGE_FORMAT formatted"
+ test "$cf_catonly" = yes && MANPAGE_FORMAT="$MANPAGE_FORMAT catonly"
+ case "$cf_name" in
+ ($cf_dir/cat*)
+ cf_found=yes
+ ;;
+ esac
+ test $cf_found=yes && break
+ fi
+ done
+ # only check the first directory in $MANPATH where we find manpages
+ if test -n "$MANPAGE_FORMAT" ; then
+ break
+ fi
+ done
+ # if we did not find the example, just assume it is normal
+ test -z "$MANPAGE_FORMAT" && MANPAGE_FORMAT=normal
+ IFS="$ac_save_ifs"
+ ;;
+(*)
+ for cf_option in $MANPAGE_FORMAT; do
+ case $cf_option in
+ (gzip|compress|BSDI|normal|formatted|catonly)
+ ;;
+ (*)
+ cf_unknown="$cf_unknown $cf_option"
+ ;;
+ esac
+ done
+ ;;