<!--
* t
****************************************************************************
- * Copyright (c) 1998-2013,2014 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2015,2017 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: ncurses.3x,v 1.119 2014/08/09 20:54:30 tom Exp @
+ * @Id: ncurses.3x,v 1.131 2017/03/25 20:45:48 tom Exp @
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
-</PRE>
-<H2><a name="h2-NAME">NAME</a></H2><PRE>
+</PRE><H2><a name="h2-NAME">NAME</a></H2><PRE>
<STRONG>ncurses</STRONG> - CRT screen handling and optimization package
-</PRE>
-<H2><a name="h2-SYNOPSIS">SYNOPSIS</a></H2><PRE>
+</PRE><H2><a name="h2-SYNOPSIS">SYNOPSIS</a></H2><PRE>
<STRONG>#include</STRONG> <STRONG><curses.h></STRONG>
-</PRE>
-<H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
+</PRE><H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
The <STRONG>ncurses</STRONG> library routines give the user a terminal-
independent method of updating character screens with rea-
sonable optimization. This implementation is "new curses"
(ncurses) and is the approved replacement for 4.4BSD clas-
sic curses, which has been discontinued. This describes
- <STRONG>ncurses</STRONG> version 6.0 (patch 20150718).
+ <STRONG>ncurses</STRONG> version 6.0 (patch 20170422).
The <STRONG>ncurses</STRONG> library emulates the curses library of System
V Release 4 UNIX, and XPG4 (X/Open Portability Guide)
lation; use of soft label keys; terminfo capabilities; and
access to low-level terminal-manipulation routines.
+
+</PRE><H3><a name="h3-Initialization">Initialization</a></H3><PRE>
The library uses the locale which the calling program has
initialized. That is normally done with <STRONG>setlocale</STRONG>:
- <STRONG>setlocale(LC_ALL,</STRONG> <STRONG>"");</STRONG>
-
- If the locale is not initialized, the library assumes that
- characters are printable as in ISO-8859-1, to work with
- certain legacy programs. You should initialize the locale
- and not rely on specific details of the library when the
- locale has not been setup.
+ <STRONG>setlocale(LC_ALL,</STRONG> <STRONG>"");</STRONG>
+ If the locale is not initialized, the library assumes that
+ characters are printable as in ISO-8859-1, to work with cer-
+ tain legacy programs. You should initialize the locale and
+ not rely on specific details of the library when the locale
+ has not been setup.
The function <STRONG>initscr</STRONG> or <STRONG>newterm</STRONG> must be called to initial-
ize the library before any of the other routines that deal
- with windows and screens are used. The routine <STRONG>endwin</STRONG>
+ with windows and screens are used. The routine <STRONG><A HREF="curs_initscr.3x.html">endwin(3x)</A></STRONG>
must be called before exiting.
To get character-at-a-time input without echoing (most
interactive, screen oriented programs want this), the fol-
lowing sequence should be used:
- <STRONG>initscr();</STRONG> <STRONG>cbreak();</STRONG> <STRONG>noecho();</STRONG>
-
- Most programs would additionally use the sequence:
+ <STRONG>initscr();</STRONG> <STRONG>cbreak();</STRONG> <STRONG>noecho();</STRONG>
+ Most programs would additionally use the sequence:
<STRONG>nonl();</STRONG>
<STRONG>intrflush(stdscr,</STRONG> <STRONG>FALSE);</STRONG>
<STRONG>keypad(stdscr,</STRONG> <STRONG>TRUE);</STRONG>
+ Before a <STRONG>curses</STRONG> program is run, the tab stops of the terminal
+ should be set and its initialization strings, if defined, must
+ be output. This can be done by executing the <STRONG>tput</STRONG> <STRONG>init</STRONG> com-
+ mand after the shell environment variable <STRONG>TERM</STRONG> has been
+ exported. <STRONG>tset(1)</STRONG> is usually responsible for doing this.
+ [See <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> for further details.]
- Before a <STRONG>curses</STRONG> program is run, the tab stops of the ter-
- minal should be set and its initialization strings, if
- defined, must be output. This can be done by executing
- the <STRONG>tput</STRONG> <STRONG>init</STRONG> command after the shell environment variable
- <STRONG>TERM</STRONG> has been exported. <STRONG>tset(1)</STRONG> is usually responsible
- for doing this. [See <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> for further details.]
+</PRE><H3><a name="h3-Datatypes">Datatypes</a></H3><PRE>
The <STRONG>ncurses</STRONG> library permits manipulation of data struc-
tures, called <EM>windows</EM>, which can be thought of as two-
dimensional arrays of characters representing all or part
names beginning with <STRONG>w</STRONG>, allowing the user to specify a
window. The routines not beginning with <STRONG>w</STRONG> affect <STRONG>stdscr</STRONG>.
- After using routines to manipulate a window, <STRONG>refresh</STRONG> is
- called, telling <STRONG>curses</STRONG> to make the user's CRT screen look
- like <STRONG>stdscr</STRONG>. The characters in a window are actually of
- type <STRONG>chtype</STRONG>, (character and attribute data) so that other
- information about the character may also be stored with
- each character.
+ After using routines to manipulate a window, <STRONG><A HREF="curs_refresh.3x.html">refresh(3x)</A></STRONG>
+ is called, telling <STRONG>curses</STRONG> to make the user's CRT screen
+ look like <STRONG>stdscr</STRONG>. The characters in a window are actually
+ of type <STRONG>chtype</STRONG>, (character and attribute data) so that
+ other information about the character may also be stored
+ with each character.
Special windows called <EM>pads</EM> may also be manipulated.
These are windows which are not constrained to the size of
characters, and input values use names, defined in
<STRONG><curses.h></STRONG>, such as <STRONG>A_REVERSE</STRONG>, <STRONG>ACS_HLINE</STRONG>, and <STRONG>KEY_LEFT</STRONG>.
+
+</PRE><H3><a name="h3-Environment-variables">Environment variables</a></H3><PRE>
If the environment variables <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> are set, or
if the program is executing in a window environment, line
and column information in the environment will override
<STRONG>TERM</STRONG> is set to <STRONG>att4424</STRONG>, then the compiled terminal defini-
tion is found in
- <STRONG>/usr/share/terminfo/a/att4424</STRONG>.
-
- (The <STRONG>a</STRONG> is copied from the first letter of <STRONG>att4424</STRONG> to avoid
- creation of huge directories.) However, if <STRONG>TERMINFO</STRONG> is
- set to <STRONG>$HOME/myterms</STRONG>, <STRONG>curses</STRONG> first checks
+ <STRONG>/usr/share/terminfo/a/att4424</STRONG>.
+ (The <STRONG>a</STRONG> is copied from the first letter of <STRONG>att4424</STRONG> to avoid
+ creation of huge directories.) However, if <STRONG>TERMINFO</STRONG> is set
+ to <STRONG>$HOME/myterms</STRONG>, <STRONG>curses</STRONG> first checks
<STRONG>$HOME/myterms/a/att4424</STRONG>,
+ and if that fails, it then checks
- and if that fails, it then checks
+ <STRONG>/usr/share/terminfo/a/att4424</STRONG>.
+ This is useful for developing experimental definitions or when
+ write permission in <STRONG>/usr/share/terminfo</STRONG> is not available.
- <STRONG>/usr/share/terminfo/a/att4424</STRONG>.
-
- This is useful for developing experimental definitions or
- when write permission in <STRONG>/usr/share/terminfo</STRONG> is not avail-
- able.
-
- The integer variables <STRONG>LINES</STRONG> and <STRONG>COLS</STRONG> are defined in
- <STRONG><curses.h></STRONG> and will be filled in by <STRONG>initscr</STRONG> with the size
+ The integer variables <STRONG>LINES</STRONG> and <STRONG>COLS</STRONG> are defined in
+ <STRONG><curses.h></STRONG> and will be filled in by <STRONG>initscr</STRONG> with the size
of the screen. The constants <STRONG>TRUE</STRONG> and <STRONG>FALSE</STRONG> have the val-
ues <STRONG>1</STRONG> and <STRONG>0</STRONG>, respectively.
- The <STRONG>curses</STRONG> routines also define the <STRONG>WINDOW</STRONG> <STRONG>*</STRONG> variable
+ The <STRONG>curses</STRONG> routines also define the <STRONG>WINDOW</STRONG> <STRONG>*</STRONG> variable
<STRONG>curscr</STRONG> which is used for certain low-level operations like
- clearing and redrawing a screen containing garbage. The
+ clearing and redrawing a screen containing garbage. The
<STRONG>curscr</STRONG> can be used in only a few routines.
-</PRE>
-<H3><a name="h3-Routine-and-Argument-Names">Routine and Argument Names</a></H3><PRE>
- Many <STRONG>curses</STRONG> routines have two or more versions. The rou-
+</PRE><H3><a name="h3-Routine-and-Argument-Names">Routine and Argument Names</a></H3><PRE>
+ Many <STRONG>curses</STRONG> routines have two or more versions. The rou-
tines prefixed with <STRONG>w</STRONG> require a window argument. The rou-
tines prefixed with <STRONG>p</STRONG> require a pad argument. Those with-
out a prefix generally use <STRONG>stdscr</STRONG>.
The routines prefixed with <STRONG>mv</STRONG> require a <EM>y</EM> and <EM>x</EM> coordinate
- to move to before performing the appropriate action. The
- <STRONG>mv</STRONG> routines imply a call to <STRONG>move</STRONG> before the call to the
- other routine. The coordinate <EM>y</EM> always refers to the row
- (of the window), and <EM>x</EM> always refers to the column. The
+ to move to before performing the appropriate action. The
+ <STRONG>mv</STRONG> routines imply a call to <STRONG>move</STRONG> before the call to the
+ other routine. The coordinate <EM>y</EM> always refers to the row
+ (of the window), and <EM>x</EM> always refers to the column. The
upper left-hand corner is always (0,0), not (1,1).
The routines prefixed with <STRONG>mvw</STRONG> take both a window argument
- and <EM>x</EM> and <EM>y</EM> coordinates. The window argument is always
+ and <EM>x</EM> and <EM>y</EM> coordinates. The window argument is always
specified before the coordinates.
- In each case, <EM>win</EM> is the window affected, and <EM>pad</EM> is the
+ In each case, <EM>win</EM> is the window affected, and <EM>pad</EM> is the
pad affected; <EM>win</EM> and <EM>pad</EM> are always pointers to type <STRONG>WIN-</STRONG>
<STRONG>DOW</STRONG>.
Option setting routines require a Boolean flag <EM>bf</EM> with the
- value <STRONG>TRUE</STRONG> or <STRONG>FALSE</STRONG>; <EM>bf</EM> is always of type <STRONG>bool</STRONG>. Most of
- the data types used in the library routines, such as <STRONG>WIN-</STRONG>
- <STRONG>DOW</STRONG>, <STRONG>SCREEN</STRONG>, <STRONG>bool</STRONG>, and <STRONG>chtype</STRONG> are defined in <STRONG><curses.h></STRONG>.
- Types used for the terminfo routines such as <STRONG>TERMINAL</STRONG> are
+ value <STRONG>TRUE</STRONG> or <STRONG>FALSE</STRONG>; <EM>bf</EM> is always of type <STRONG>bool</STRONG>. Most of
+ the data types used in the library routines, such as <STRONG>WIN-</STRONG>
+ <STRONG>DOW</STRONG>, <STRONG>SCREEN</STRONG>, <STRONG>bool</STRONG>, and <STRONG>chtype</STRONG> are defined in <STRONG><curses.h></STRONG>.
+ Types used for the terminfo routines such as <STRONG>TERMINAL</STRONG> are
defined in <STRONG><term.h></STRONG>.
- This manual page describes functions which may appear in
- any configuration of the library. There are two common
+ This manual page describes functions which may appear in
+ any configuration of the library. There are two common
configurations of the library:
- ncurses
- the "normal" library, which handles 8-bit
- characters. The normal (8-bit) library stores
- characters combined with attributes in <STRONG>chtype</STRONG>
- data.
-
- Attributes alone (no corresponding character)
- may be stored in <STRONG>chtype</STRONG> or the equivalent
- <STRONG>attr_t</STRONG> data. In either case, the data is
- stored in something like an integer.
-
- Each cell (row and column) in a <STRONG>WINDOW</STRONG> is
- stored as a <STRONG>chtype</STRONG>.
-
- ncursesw
- the so-called "wide" library, which handles
- multibyte characters (see the section on
- <STRONG>ALTERNATE</STRONG> <STRONG>CONFIGURATIONS</STRONG>). The "wide" library
- includes all of the calls from the "normal"
- library. It adds about one third more calls
- using data types which store multibyte charac-
- ters:
-
- <STRONG>cchar_t</STRONG>
- corresponds to <STRONG>chtype</STRONG>. However it is a
- structure, because more data is stored
- than can fit into an integer. The char-
- acters are large enough to require a full
- integer value - and there may be more
- than one character per cell. The video
- attributes and color are stored in sepa-
- rate fields of the structure.
-
- Each cell (row and column) in a <STRONG>WINDOW</STRONG> is
- stored as a <STRONG>cchar_t</STRONG>.
-
- <STRONG>wchar_t</STRONG>
- stores a "wide" character. Like <STRONG>chtype</STRONG>,
- this may be an integer.
-
- <STRONG>wint_t</STRONG>
- stores a <STRONG>wchar_t</STRONG> or <STRONG>WEOF</STRONG> - not the same,
- though both may have the same size.
-
- The "wide" library provides new functions
- which are analogous to functions in the "nor-
- mal" library. There is a naming convention
- which relates many of the normal/wide vari-
- ants: a "_w" is inserted into the name. For
- example, <STRONG>waddch</STRONG> becomes <STRONG>wadd_wch</STRONG>.
-
-
-</PRE>
-<H3><a name="h3-Routine-Name-Index">Routine Name Index</a></H3><PRE>
+ <EM>ncurses</EM>
+ the "normal" library, which handles 8-bit charac-
+ ters. The normal (8-bit) library stores charac-
+ ters combined with attributes in <STRONG>chtype</STRONG> data.
+
+ Attributes alone (no corresponding character) may
+ be stored in <STRONG>chtype</STRONG> or the equivalent <STRONG>attr_t</STRONG> data.
+ In either case, the data is stored in something
+ like an integer.
+
+ Each cell (row and column) in a <STRONG>WINDOW</STRONG> is stored
+ as a <STRONG>chtype</STRONG>.
+
+ <EM>ncursesw</EM>
+ the so-called "wide" library, which handles multi-
+ byte characters (see the section on <STRONG>ALTERNATE</STRONG> <STRONG>CON-</STRONG>
+ <STRONG>FIGURATIONS</STRONG>). The "wide" library includes all of
+ the calls from the "normal" library. It adds
+ about one third more calls using data types which
+ store multibyte characters:
+
+ <STRONG>cchar_t</STRONG>
+ corresponds to <STRONG>chtype</STRONG>. However it is a
+ structure, because more data is stored than
+ can fit into an integer. The characters are
+ large enough to require a full integer value
+ - and there may be more than one character
+ per cell. The video attributes and color are
+ stored in separate fields of the structure.
+
+ Each cell (row and column) in a <STRONG>WINDOW</STRONG> is
+ stored as a <STRONG>cchar_t</STRONG>.
+
+ <STRONG>wchar_t</STRONG>
+ stores a "wide" character. Like <STRONG>chtype</STRONG>, this
+ may be an integer.
+
+ <STRONG>wint_t</STRONG>
+ stores a <STRONG>wchar_t</STRONG> or <STRONG>WEOF</STRONG> - not the same,
+ though both may have the same size.
+
+ The "wide" library provides new functions which
+ are analogous to functions in the "normal"
+ library. There is a naming convention which
+ relates many of the normal/wide variants: a "_w"
+ is inserted into the name. For example, <STRONG>waddch</STRONG>
+ becomes <STRONG>wadd_wch</STRONG>.
+
+
+</PRE><H3><a name="h3-Routine-Name-Index">Routine Name Index</a></H3><PRE>
The following table lists each <STRONG>curses</STRONG> routine and the name
of the manual page on which it is described. Routines
- flagged with `*' are ncurses-specific, not described by
+ flagged with "*" are ncurses-specific, not described by
XPG4 or present in SVr4.
- <STRONG>curses</STRONG> Routine Name Manual Page Name
- --------------------------------------------
- COLOR_PAIR <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
- PAIR_NUMBER <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- _nc_free_and_exit <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
- _nc_freeall <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
- _nc_tracebits <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
-
- _traceattr <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
- _traceattr2 <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
- _tracechar <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
- _tracechtype <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
- _tracechtype2 <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
- _tracedump <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
- _tracef <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
- _tracemouse <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
- add_wch <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
- add_wchnstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
- add_wchstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
- addch <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
- addchnstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
- addchstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
- addnstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
- addnwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
- addstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
- addwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
- assume_default_colors <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>*
- attr_get <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- attr_off <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- attr_on <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- attr_set <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- attroff <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- attron <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- attrset <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- baudrate <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
- beep <STRONG><A HREF="curs_beep.3x.html">curs_beep(3x)</A></STRONG>
- bkgd <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
- bkgdset <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
- bkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
- bkgrndset <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
- border <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
- border_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
- box <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
- box_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
- can_change_color <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
- cbreak <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- chgat <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- clear <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
- clearok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
- clrtobot <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
- clrtoeol <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
- color_content <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
- color_set <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- copywin <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
- curs_set <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
- curses_version <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
- def_prog_mode <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
- def_shell_mode <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
- define_key <STRONG><A HREF="define_key.3x.html">define_key(3x)</A></STRONG>*
- del_curterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- delay_output <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
- delch <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
- deleteln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
- delscreen <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
- delwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
- derwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
- doupdate <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
- dupwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
- echo <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- echo_wchar <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
- echochar <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
- endwin <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
- erase <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
-
- erasechar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
- erasewchar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
- filter <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
- flash <STRONG><A HREF="curs_beep.3x.html">curs_beep(3x)</A></STRONG>
- flushinp <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
- get_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
- get_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
- getattrs <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- getbegx <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
- getbegy <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
- getbegyx <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
- getbkgd <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
- getbkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
- getcchar <STRONG><A HREF="curs_getcchar.3x.html">curs_getcchar(3x)</A></STRONG>
- getch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
- getcurx <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
- getcury <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
- getmaxx <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
- getmaxy <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
- getmaxyx <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
- getmouse <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
- getn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
- getnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
- getparx <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
- getpary <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
- getparyx <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
- getstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
- getsyx <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
- getwin <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
- getyx <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
- halfdelay <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- has_colors <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
- has_ic <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
- has_il <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
- has_key <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>*
- hline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
- hline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
- idcok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
- idlok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
- immedok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
- in_wch <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
- in_wchnstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
- in_wchstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
- inch <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
- inchnstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
- inchstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
- init_color <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
- init_pair <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
- initscr <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
- innstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
- innwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
- ins_nwstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
- ins_wch <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
- ins_wstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
- insch <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
- insdelln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
- insertln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
- insnstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
- insstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
- instr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
- intrflush <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- inwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
- is_cleared <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
- is_idcok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
- is_idlok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-
- is_immedok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
- is_keypad <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
- is_leaveok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
- is_linetouched <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
- is_nodelay <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
- is_notimeout <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
- is_scrollok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
- is_syncok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
- is_term_resized <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
- is_wintouched <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
- isendwin <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
- key_defined <STRONG><A HREF="key_defined.3x.html">key_defined(3x)</A></STRONG>*
- key_name <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
- keybound <STRONG><A HREF="keybound.3x.html">keybound(3x)</A></STRONG>*
- keyname <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
- keyok <STRONG><A HREF="keyok.3x.html">keyok(3x)</A></STRONG>*
- keypad <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- killchar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
- killwchar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
- leaveok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
- longname <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
- mcprint <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG>*
- meta <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- mouse_trafo <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
- mouseinterval <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
- mousemask <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
- move <STRONG><A HREF="curs_move.3x.html">curs_move(3x)</A></STRONG>
- mvadd_wch <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
- mvadd_wchnstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
- mvadd_wchstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
- mvaddch <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
- mvaddchnstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
- mvaddchstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
- mvaddnstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
- mvaddnwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
- mvaddstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
- mvaddwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
- mvchgat <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- mvcur <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- mvdelch <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
- mvderwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
- mvget_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
- mvget_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
- mvgetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
- mvgetn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
- mvgetnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
- mvgetstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
- mvhline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
- mvhline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
- mvin_wch <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
- mvin_wchnstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
- mvin_wchstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
- mvinch <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
- mvinchnstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
- mvinchstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
- mvinnstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
- mvinnwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
- mvins_nwstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
- mvins_wch <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
- mvins_wstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
- mvinsch <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
- mvinsnstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
- mvinsstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
- mvinstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
- mvinwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
-
- mvprintw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
- mvscanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
- mvvline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
- mvvline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
- mvwadd_wch <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
- mvwadd_wchnstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
- mvwadd_wchstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
- mvwaddch <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
- mvwaddchnstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
- mvwaddchstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
- mvwaddnstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
- mvwaddnwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
- mvwaddstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
- mvwaddwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
- mvwchgat <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- mvwdelch <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
- mvwget_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
- mvwget_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
- mvwgetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
- mvwgetn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
- mvwgetnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
- mvwgetstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
- mvwhline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
- mvwhline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
- mvwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
- mvwin_wch <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
- mvwin_wchnstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
- mvwin_wchstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
- mvwinch <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
- mvwinchnstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
- mvwinchstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
- mvwinnstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
- mvwinnwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
- mvwins_nwstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
- mvwins_wch <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
- mvwins_wstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
- mvwinsch <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
- mvwinsnstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
- mvwinsstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
- mvwinstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
- mvwinwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
- mvwprintw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
- mvwscanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
- mvwvline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
- mvwvline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
- napms <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
- newpad <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
- newterm <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
- newwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
- nl <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
- nocbreak <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- nodelay <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- noecho <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- nofilter <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>*
- nonl <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
- noqiflush <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- noraw <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- notimeout <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- overlay <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
- overwrite <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
- pair_content <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
- pechochar <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
- pnoutrefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
- prefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
- printw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
-
- putp <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- putwin <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
- qiflush <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- raw <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- redrawwin <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
- refresh <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
- reset_prog_mode <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
- reset_shell_mode <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
- resetty <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
- resizeterm <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
- restartterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- ripoffline <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
- savetty <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
- scanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
- scr_dump <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
- scr_init <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
- scr_restore <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
- scr_set <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
- scrl <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
- scroll <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
- scrollok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
- set_curterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- set_term <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
- setcchar <STRONG><A HREF="curs_getcchar.3x.html">curs_getcchar(3x)</A></STRONG>
- setscrreg <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
- setsyx <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
- setterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- setupterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- slk_attr <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>*
- slk_attr_off <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_attr_on <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_attr_set <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_attroff <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_attron <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_attrset <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_clear <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_color <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_init <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_label <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_noutrefresh <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_refresh <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_restore <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_set <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- slk_touch <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
- standend <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- standout <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- start_color <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
- subpad <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
- subwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
- syncok <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
- term_attrs <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
- termattrs <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
- termname <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
- tgetent <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
- tgetflag <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
- tgetnum <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
- tgetstr <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
- tgoto <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
- tigetflag <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- tigetnum <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- tigetstr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- timeout <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- touchline <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
- touchwin <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
- tparm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-
- tputs <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
- tputs <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- trace <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
- typeahead <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- unctrl <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
- unget_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
- ungetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
- ungetmouse <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
- untouchwin <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
- use_default_colors <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>*
- use_env <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
- use_extended_names <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
- use_legacy_coding <STRONG><A HREF="legacy_coding.3x.html">legacy_coding(3x)</A></STRONG>*
- use_tioctl <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
- vid_attr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- vid_puts <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- vidattr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- vidputs <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
- vline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
- vline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
- vw_printw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
- vw_scanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
- vwprintw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
- vwscanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
- wadd_wch <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
- wadd_wchnstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
- wadd_wchstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
- waddch <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
- waddchnstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
- waddchstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
- waddnstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
- waddnwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
- waddstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
- waddwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
- wattr_get <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- wattr_off <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- wattr_on <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- wattr_set <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- wattroff <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- wattron <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- wattrset <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- wbkgd <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
- wbkgdset <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
- wbkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
- wbkgrndset <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
- wborder <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
- wborder_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
- wchgat <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- wclear <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
- wclrtobot <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
- wclrtoeol <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
- wcolor_set <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- wcursyncup <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
- wdelch <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
- wdeleteln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
- wecho_wchar <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
- wechochar <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
- wenclose <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
- werase <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
- wget_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
- wget_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
- wgetbkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
- wgetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
- wgetn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
- wgetnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
-
- wgetstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
- whline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
- whline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
- win_wch <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
- win_wchnstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
- win_wchstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
- winch <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
- winchnstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
- winchstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
- winnstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
- winnwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
- wins_nwstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
- wins_wch <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
- wins_wstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
- winsch <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
- winsdelln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
- winsertln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
- winsnstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
- winsstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
- winstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
- winwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
- wmouse_trafo <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
- wmove <STRONG><A HREF="curs_move.3x.html">curs_move(3x)</A></STRONG>
- wnoutrefresh <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
- wprintw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
- wredrawln <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
- wrefresh <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
- wresize <STRONG><A HREF="wresize.3x.html">wresize(3x)</A></STRONG>*
- wscanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
- wscrl <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
- wsetscrreg <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
- wstandend <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- wstandout <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
- wsyncdown <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
- wsyncup <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
- wtimeout <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
- wtouchln <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
- wunctrl <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
- wvline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
- wvline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
-
-
-</PRE>
-<H2><a name="h2-RETURN-VALUE">RETURN VALUE</a></H2><PRE>
+ <STRONG>curses</STRONG> Routine Name Manual Page Name
+ ---------------------------------------------
+ COLOR_PAIR <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+ PAIR_NUMBER <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ _nc_free_and_exit <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
+ _nc_freeall <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
+ _nc_tracebits <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+ _traceattr <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+ _traceattr2 <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+ _tracechar <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+ _tracechtype <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+ _tracechtype2 <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+ _tracedump <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+ _tracef <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+
+ _tracemouse <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+ add_wch <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+ add_wchnstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+ add_wchstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+ addch <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+ addchnstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+ addchstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+ addnstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+ addnwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+ addstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+ addwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+ alloc_pair <STRONG><A HREF="new_pair.3x.html">new_pair(3x)</A></STRONG>*
+ assume_default_colors <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>*
+ attr_get <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ attr_off <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ attr_on <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ attr_set <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ attroff <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ attron <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ attrset <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ baudrate <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+ beep <STRONG><A HREF="curs_beep.3x.html">curs_beep(3x)</A></STRONG>
+ bkgd <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
+ bkgdset <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
+ bkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+ bkgrndset <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+ border <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+ border_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+ box <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+ box_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+ can_change_color <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+ cbreak <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ chgat <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ clear <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+ clearok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+ clrtobot <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+ clrtoeol <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+ color_content <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+ color_set <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ copywin <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
+ curs_set <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+ curses_version <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
+ def_prog_mode <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+ def_shell_mode <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+ define_key <STRONG><A HREF="define_key.3x.html">define_key(3x)</A></STRONG>*
+ del_curterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ delay_output <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+ delch <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
+ deleteln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+ delscreen <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+ delwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+ derwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+ doupdate <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+ dupwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+ echo <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ echo_wchar <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+ echochar <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+ endwin <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+ erase <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+ erasechar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+ erasewchar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+ extended_color_content <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>*
+ extended_pair_content <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>*
+ extended_slk_color <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>*
+ filter <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+
+ find_pair <STRONG><A HREF="new_pair.3x.html">new_pair(3x)</A></STRONG>*
+ flash <STRONG><A HREF="curs_beep.3x.html">curs_beep(3x)</A></STRONG>
+ flushinp <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+ free_pair <STRONG><A HREF="new_pair.3x.html">new_pair(3x)</A></STRONG>*
+ get_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
+ get_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+ getattrs <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ getbegx <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+ getbegy <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+ getbegyx <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
+ getbkgd <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
+ getbkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+ getcchar <STRONG><A HREF="curs_getcchar.3x.html">curs_getcchar(3x)</A></STRONG>
+ getch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
+ getcurx <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+ getcury <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+ getmaxx <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+ getmaxy <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+ getmaxyx <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
+ getmouse <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+ getn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+ getnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+ getparx <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+ getpary <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+ getparyx <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
+ getstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+ getsyx <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+ getwin <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+ getyx <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
+ halfdelay <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ has_colors <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+ has_ic <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+ has_il <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+ has_key <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>*
+ hline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+ hline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+ idcok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+ idlok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+ immedok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+ in_wch <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
+ in_wchnstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+ in_wchstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+ inch <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
+ inchnstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+ inchstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+ init_color <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+ init_extended_color <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>*
+ init_extended_pair <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>*
+ init_pair <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+ initscr <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+ innstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+ innwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+ ins_nwstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+ ins_wch <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
+ ins_wstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+ insch <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
+ insdelln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+ insertln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+ insnstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+ insstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+ instr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+ intrflush <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ inwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+ is_cleared <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ is_idcok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+
+ is_idlok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ is_immedok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ is_keypad <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ is_leaveok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ is_linetouched <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+ is_nodelay <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ is_notimeout <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ is_pad <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ is_scrollok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ is_subwin <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ is_syncok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ is_term_resized <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
+ is_wintouched <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+ isendwin <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+ key_defined <STRONG><A HREF="key_defined.3x.html">key_defined(3x)</A></STRONG>*
+ key_name <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+ keybound <STRONG><A HREF="keybound.3x.html">keybound(3x)</A></STRONG>*
+ keyname <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+ keyok <STRONG><A HREF="keyok.3x.html">keyok(3x)</A></STRONG>*
+ keypad <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ killchar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+ killwchar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+ leaveok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+ longname <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+ mcprint <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG>*
+ meta <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ mouse_trafo <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+ mouseinterval <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+ mousemask <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+ move <STRONG><A HREF="curs_move.3x.html">curs_move(3x)</A></STRONG>
+ mvadd_wch <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+ mvadd_wchnstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+ mvadd_wchstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+ mvaddch <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+ mvaddchnstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+ mvaddchstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+ mvaddnstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+ mvaddnwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+ mvaddstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+ mvaddwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+ mvchgat <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ mvcur <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ mvdelch <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
+ mvderwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+ mvget_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
+ mvget_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+ mvgetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
+ mvgetn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+ mvgetnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+ mvgetstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+ mvhline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+ mvhline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+ mvin_wch <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
+ mvin_wchnstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+ mvin_wchstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+ mvinch <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
+ mvinchnstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+ mvinchstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+ mvinnstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+ mvinnwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+ mvins_nwstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+ mvins_wch <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
+ mvins_wstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+ mvinsch <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
+ mvinsnstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+
+ mvinsstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+ mvinstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+ mvinwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+ mvprintw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+ mvscanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+ mvvline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+ mvvline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+ mvwadd_wch <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+ mvwadd_wchnstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+ mvwadd_wchstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+ mvwaddch <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+ mvwaddchnstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+ mvwaddchstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+ mvwaddnstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+ mvwaddnwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+ mvwaddstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+ mvwaddwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+ mvwchgat <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ mvwdelch <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
+ mvwget_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
+ mvwget_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+ mvwgetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
+ mvwgetn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+ mvwgetnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+ mvwgetstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+ mvwhline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+ mvwhline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+ mvwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+ mvwin_wch <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
+ mvwin_wchnstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+ mvwin_wchstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+ mvwinch <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
+ mvwinchnstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+ mvwinchstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+ mvwinnstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+ mvwinnwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+ mvwins_nwstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+ mvwins_wch <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
+ mvwins_wstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+ mvwinsch <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
+ mvwinsnstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+ mvwinsstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+ mvwinstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+ mvwinwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+ mvwprintw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+ mvwscanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+ mvwvline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+ mvwvline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+ napms <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+ newpad <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
+ newterm <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+ newwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+ nl <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+ nocbreak <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ nodelay <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ noecho <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ nofilter <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>*
+ nonl <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+ noqiflush <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ noraw <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ notimeout <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ overlay <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
+ overwrite <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
+ pair_content <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+ pechochar <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
+
+ pnoutrefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
+ prefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
+ printw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+ putp <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ putwin <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+ qiflush <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ raw <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ redrawwin <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+ refresh <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+ reset_prog_mode <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+ reset_shell_mode <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+ resetty <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+ resize_term <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
+ resizeterm <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
+ restartterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ ripoffline <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+ savetty <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+ scanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+ scr_dump <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
+ scr_init <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
+ scr_restore <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
+ scr_set <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
+ scrl <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
+ scroll <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
+ scrollok <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+ set_curterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ set_term <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+ setcchar <STRONG><A HREF="curs_getcchar.3x.html">curs_getcchar(3x)</A></STRONG>
+ setscrreg <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+ setsyx <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+ setterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ setupterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ slk_attr <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>*
+ slk_attr_off <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_attr_on <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_attr_set <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_attroff <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_attron <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_attrset <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_clear <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_color <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_init <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_label <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_noutrefresh <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_refresh <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_restore <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_set <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ slk_touch <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+ standend <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ standout <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ start_color <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+ subpad <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
+ subwin <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+ syncok <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+ term_attrs <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+ termattrs <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+ termname <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+ tgetent <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+ tgetflag <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+ tgetnum <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+ tgetstr <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+ tgoto <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+ tigetflag <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ tigetnum <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ tigetstr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+
+ timeout <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ tiparm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>*
+ touchline <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+ touchwin <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+ tparm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ tputs <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+ tputs <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ trace <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+ typeahead <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ unctrl <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+ unget_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
+ ungetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
+ ungetmouse <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+ untouchwin <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+ use_default_colors <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>*
+ use_env <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+ use_extended_names <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
+ use_legacy_coding <STRONG><A HREF="legacy_coding.3x.html">legacy_coding(3x)</A></STRONG>*
+ use_tioctl <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+ vid_attr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ vid_puts <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ vidattr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ vidputs <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+ vline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+ vline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+ vw_printw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+ vw_scanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+ vwprintw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+ vwscanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+ wadd_wch <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+ wadd_wchnstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+ wadd_wchstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+ waddch <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+ waddchnstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+ waddchstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+ waddnstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+ waddnwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+ waddstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+ waddwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+ wattr_get <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ wattr_off <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ wattr_on <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ wattr_set <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ wattroff <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ wattron <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ wattrset <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ wbkgd <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
+ wbkgdset <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
+ wbkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+ wbkgrndset <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+ wborder <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+ wborder_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+ wchgat <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ wclear <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+ wclrtobot <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+ wclrtoeol <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+ wcolor_set <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ wcursyncup <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+ wdelch <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
+ wdeleteln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+ wecho_wchar <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+ wechochar <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+ wenclose <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+ werase <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+ wget_wch <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
+
+ wget_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+ wgetbkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+ wgetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
+ wgetdelay <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ wgetn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+ wgetnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+ wgetparent <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ wgetscrreg <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+ wgetstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+ whline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+ whline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+ win_wch <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
+ win_wchnstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+ win_wchstr <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+ winch <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
+ winchnstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+ winchstr <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+ winnstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+ winnwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+ wins_nwstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+ wins_wch <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
+ wins_wstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+ winsch <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
+ winsdelln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+ winsertln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+ winsnstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+ winsstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+ winstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+ winwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+ wmouse_trafo <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+ wmove <STRONG><A HREF="curs_move.3x.html">curs_move(3x)</A></STRONG>
+ wnoutrefresh <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+ wprintw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+ wredrawln <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+ wrefresh <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+ wresize <STRONG><A HREF="wresize.3x.html">wresize(3x)</A></STRONG>*
+ wscanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+ wscrl <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
+ wsetscrreg <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+ wstandend <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ wstandout <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ wsyncdown <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+ wsyncup <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+ wtimeout <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+ wtouchln <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+ wunctrl <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+ wvline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+ wvline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+
+
+</PRE><H2><a name="h2-RETURN-VALUE">RETURN VALUE</a></H2><PRE>
Routines that return an integer return <STRONG>ERR</STRONG> upon failure
and an integer value other than <STRONG>ERR</STRONG> upon successful com-
pletion, unless otherwise noted in the routine descrip-
Routines that return pointers return <STRONG>NULL</STRONG> on error.
-</PRE>
-<H2><a name="h2-ENVIRONMENT">ENVIRONMENT</a></H2><PRE>
+</PRE><H2><a name="h2-ENVIRONMENT">ENVIRONMENT</a></H2><PRE>
The following environment symbols are useful for customiz-
ing the runtime behavior of the <STRONG>ncurses</STRONG> library. The most
important ones have been already discussed in detail.
- CC When set, change occurrences of the command_character
- (i.e., the <STRONG>cmdch</STRONG> capability) of the loaded terminfo
- entries to the value of this variable. Very few ter-
- minfo entries provide this feature.
-
- Because this name is also used in development envi-
- ronments to represent the C compiler's name, <STRONG>ncurses</STRONG>
- ignores it if it does not happen to be a single char-
- acter.
-
- BAUDRATE
- The debugging library checks this environment vari-
- able when the application has redirected output to a
- file. The variable's numeric value is used for the
- baudrate. If no value is found, <STRONG>ncurses</STRONG> uses 9600.
- This allows testers to construct repeatable test-
- cases that take into account costs that depend on
- baudrate.
-
- COLUMNS
- Specify the width of the screen in characters.
- Applications running in a windowing environment usu-
- ally are able to obtain the width of the window in
- which they are executing. If neither the <STRONG>COLUMNS</STRONG>
- value nor the terminal's screen size is available,
- <STRONG>ncurses</STRONG> uses the size which may be specified in the
- terminfo database (i.e., the <STRONG>cols</STRONG> capability).
-
- It is important that your application use a correct
- size for the screen. This is not always possible
- because your application may be running on a host
- which does not honor NAWS (Negotiations About Window
- Size), or because you are temporarily running as
- another user. However, setting <STRONG>COLUMNS</STRONG> and/or <STRONG>LINES</STRONG>
- overrides the library's use of the screen size
- obtained from the operating system.
-
- Either <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> symbols may be specified
- independently. This is mainly useful to circumvent
- legacy misfeatures of terminal descriptions, e.g.,
- xterm which commonly specifies a 65 line screen. For
- best results, <STRONG>lines</STRONG> and <STRONG>cols</STRONG> should not be specified
- in a terminal description for terminals which are run
- as emulations.
-
- Use the <STRONG>use_env</STRONG> function to disable all use of exter-
- nal environment (but not including system calls) to
- determine the screen size. Use the <STRONG>use_tioctl</STRONG> func-
- tion to update <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> to match the screen
- size obtained from system calls or the terminal data-
- base.
-
- ESCDELAY
- Specifies the total time, in milliseconds, for which
- ncurses will await a character sequence, e.g., a
- function key. The default value, 1000 milliseconds,
- is enough for most uses. However, it is made a vari-
- able to accommodate unusual applications.
-
- The most common instance where you may wish to change
- this value is to work with slow hosts, e.g., running
- on a network. If the host cannot read characters
- rapidly enough, it will have the same effect as if
- the terminal did not send characters rapidly enough.
- The library will still see a timeout.
-
- Note that xterm mouse events are built up from char-
- acter sequences received from the xterm. If your
- application makes heavy use of multiple-clicking, you
- may wish to lengthen this default value because the
- timeout applies to the composed multi-click event as
- well as the individual clicks.
-
- In addition to the environment variable, this imple-
- mentation provides a global variable with the same
- name. Portable applications should not rely upon the
- presence of ESCDELAY in either form, but setting the
- environment variable rather than the global variable
- does not create problems when compiling an applica-
- tion.
-
- HOME Tells <STRONG>ncurses</STRONG> where your home directory is. That is
- where it may read and write auxiliary terminal
- descriptions:
-
- $HOME/.termcap
- $HOME/.terminfo
-
- LINES
- Like COLUMNS, specify the height of the screen in
- characters. See COLUMNS for a detailed description.
-
- MOUSE_BUTTONS_123
- This applies only to the OS/2 EMX port. It specifies
- the order of buttons on the mouse. OS/2 numbers a
- 3-button mouse inconsistently from other platforms:
-
- 1 = left
- 2 = right
- 3 = middle.
-
- This variable lets you customize the mouse. The
- variable must be three numeric digits 1-3 in any
- order, e.g., 123 or 321. If it is not specified,
- <STRONG>ncurses</STRONG> uses 132.
-
- NCURSES_ASSUMED_COLORS
- Override the compiled-in assumption that the termi-
- nal's default colors are white-on-black (see
- <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>). You may set the foreground and
- background color values with this environment vari-
- able by proving a 2-element list: foreground,back-
- ground. For example, to tell ncurses to not assume
- anything about the colors, set this to "-1,-1". To
- make it green-on-black, set it to "2,0". Any posi-
- tive value from zero to the terminfo <STRONG>max_colors</STRONG> value
- is allowed.
-
- NCURSES_CONSOLE2
- This applies only to the MinGW port of ncurses.
-
- The <STRONG>Console2</STRONG> program's handling of the Microsoft Con-
- sole API call <STRONG>CreateConsoleScreenBuffer</STRONG> is defective.
- Applications which use this will hang. However, it
- is possible to simulate the action of this call by
- mapping coordinates, explicitly saving and restoring
- the original screen contents. Setting the environ-
- ment variable <STRONG>NCGDB</STRONG> has the same effect.
-
- NCURSES_GPM_TERMS
- This applies only to ncurses configured to use the
- GPM interface.
-
- If present, the environment variable is a list of one
- or more terminal names against which the TERM envi-
- ronment variable is matched. Setting it to an empty
- value disables the GPM interface; using the built-in
- support for xterm, etc.
-
- If the environment variable is absent, ncurses will
- attempt to open GPM if TERM contains "linux".
-
- NCURSES_NO_HARD_TABS
- <STRONG>Ncurses</STRONG> may use tabs as part of the cursor movement
- optimization. In some cases, your terminal driver
- may not handle these properly. Set this environment
- variable to disable the feature. You can also adjust
- your <STRONG>stty</STRONG> settings to avoid the problem.
-
- NCURSES_NO_MAGIC_COOKIE
- Some terminals use a magic-cookie feature which
- requires special handling to make highlighting and
- other video attributes display properly. You can
- suppress the highlighting entirely for these termi-
- nals by setting this environment variable.
-
- NCURSES_NO_PADDING
- Most of the terminal descriptions in the terminfo
- database are written for real "hardware" terminals.
- Many people use terminal emulators which run in a
- windowing environment and use curses-based applica-
- tions. Terminal emulators can duplicate all of the
- important aspects of a hardware terminal, but they do
- not have the same limitations. The chief limitation
- of a hardware terminal from the standpoint of your
- application is the management of dataflow, i.e., tim-
- ing. Unless a hardware terminal is interfaced into a
- terminal concentrator (which does flow control), it
- (or your application) must manage dataflow, prevent-
- ing overruns. The cheapest solution (no hardware
- cost) is for your program to do this by pausing after
- operations that the terminal does slowly, such as
- clearing the display.
-
- As a result, many terminal descriptions (including
- the vt100) have delay times embedded. You may wish
- to use these descriptions, but not want to pay the
- performance penalty.
-
- Set the NCURSES_NO_PADDING environment variable to
- disable all but mandatory padding. Mandatory padding
- is used as a part of special control sequences such
- as <EM>flash</EM>.
-
- NCURSES_NO_SETBUF
- This setting is obsolete. Before changes
-
- <STRONG>o</STRONG> started with 5.9 patch 20120825 and
-
- <STRONG>o</STRONG> continued though 5.9 patch 20130126
-
- <STRONG>ncurses</STRONG> enabled buffered output during terminal ini-
- tialization. This was done (as in SVr4 curses) for
- performance reasons. For testing purposes, both of
- <STRONG>ncurses</STRONG> and certain applications, this feature was
- made optional. Setting the NCURSES_NO_SETBUF vari-
- able disabled output buffering, leaving the output in
- the original (usually line buffered) mode.
-
- In the current implementation, ncurses performs its
- own buffering and does not require this workaround.
- It does not modify the buffering of the standard out-
- put.
-
- The reason for the change was to make the behavior
- for interrupts and other signals more robust. One
- drawback is that certain nonconventional programs
- would mix ordinary stdio calls with ncurses calls and
- (usually) work. This is no longer possible since
- ncurses is not using the buffered standard output but
- its own output (to the same file descriptor). As a
- special case, the low-level calls such as <STRONG>putp</STRONG> still
- use the standard output. But high-level curses calls
- do not.
-
- NCURSES_NO_UTF8_ACS
- During initialization, the <STRONG>ncurses</STRONG> library checks for
- special cases where VT100 line-drawing (and the cor-
- responding alternate character set capabilities)
- described in the terminfo are known to be missing.
- Specifically, when running in a UTF-8 locale, the
- Linux console emulator and the GNU screen program
- ignore these. Ncurses checks the TERM environment
- variable for these. For other special cases, you
- should set this environment variable. Doing this
- tells ncurses to use Unicode values which correspond
- to the VT100 line-drawing glyphs. That works for the
- special cases cited, and is likely to work for termi-
- nal emulators.
-
- When setting this variable, you should set it to a
- nonzero value. Setting it to zero (or to a nonnum-
- ber) disables the special check for "linux" and
- "screen".
-
- As an alternative to the environment variable,
- ncurses checks for an extended terminfo capability
- <STRONG>U8</STRONG>. This is a numeric capability which can be com-
- piled using <STRONG>tic</STRONG> <STRONG>-x</STRONG>. For example
-
- # linux console, if patched to provide working
- # VT100 shift-in/shift-out, with corresponding font.
- linux-vt100|linux console with VT100 line-graphics,
- U8#0, use=linux,
-
- # uxterm with vt100Graphics resource set to false
- xterm-utf8|xterm relying on UTF-8 line-graphics,
- U8#1, use=xterm,
-
- The name "U8" is chosen to be two characters, to per-
- mit it to be used by applications that use ncurses'
- termcap interface.
-
- NCURSES_TRACE
- During initialization, the <STRONG>ncurses</STRONG> debugging library
- checks the NCURSES_TRACE environment variable. If it
- is defined, to a numeric value, <STRONG>ncurses</STRONG> calls the
- <STRONG>trace</STRONG> function, using that value as the argument.
-
- The argument values, which are defined in <STRONG>curses.h</STRONG>,
- provide several types of information. When running
- with traces enabled, your application will write the
- file <STRONG>trace</STRONG> to the current directory.
-
- TERM Denotes your terminal type. Each terminal type is
- distinct, though many are similar.
-
- <STRONG>TERM</STRONG> is commonly set by terminal emulators to help
- applications find a workable terminal description.
- Some of those choose a popular approximation, e.g.,
- "ansi", "vt100", "xterm" rather than an exact fit.
- Not infrequently, your application will have problems
- with that approach, e.g., incorrect function-key def-
- initions.
-
- If you set <STRONG>TERM</STRONG> in your environment, it has no effect
- on the operation of the terminal emulator. It only
- affects the way applications work within the termi-
- nal. Likewise, as a general rule (<STRONG>xterm</STRONG> being a rare
- exception), terminal emulators which allow you to
- specify <STRONG>TERM</STRONG> as a parameter or configuration value do
- not change their behavior to match that setting.
-
- TERMCAP
- If the <STRONG>ncurses</STRONG> library has been configured with <EM>term-</EM>
- <EM>cap</EM> support, <STRONG>ncurses</STRONG> will check for a terminal's
- description in termcap form if it is not available in
- the terminfo database.
-
- The TERMCAP environment variable contains either a
- terminal description (with newlines stripped out), or
- a file name telling where the information denoted by
- the TERM environment variable exists. In either
- case, setting it directs <STRONG>ncurses</STRONG> to ignore the usual
- place for this information, e.g., /etc/termcap.
-
- TERMINFO
- Overrides the directory in which <STRONG>ncurses</STRONG> searches for
- your terminal description. This is the simplest, but
- not the only way to change the list of directories.
- The complete list of directories in order follows:
-
- <STRONG>o</STRONG> the last directory to which <STRONG>ncurses</STRONG> wrote, if
- any, is searched first
-
- <STRONG>o</STRONG> the directory specified by the TERMINFO environ-
- ment variable
-
- <STRONG>o</STRONG> $HOME/.terminfo
-
- <STRONG>o</STRONG> directories listed in the TERMINFO_DIRS environ-
- ment variable
-
- <STRONG>o</STRONG> one or more directories whose names are config-
- ured and compiled into the ncurses library, i.e.,
-
- <STRONG>o</STRONG> /usr/local/ncurses/share/ter-
- minfo:/usr/share/terminfo (corresponding to
- the TERMINFO_DIRS variable)
-
- <STRONG>o</STRONG> /usr/share/terminfo (corresponding to the
- TERMINFO variable)
-
- TERMINFO_DIRS
- Specifies a list of directories to search for termi-
- nal descriptions. The list is separated by colons
- (i.e., ":") on Unix, semicolons on OS/2 EMX.
-
- All of the terminal descriptions are in terminfo
- form. Normally these are stored in a directory tree,
- using subdirectories named by the first letter of the
- terminal names therein.
-
- If <STRONG>ncurses</STRONG> is built with a hashed database, then each
- entry in this list can also be the path of the corre-
- sponding database file.
-
- If <STRONG>ncurses</STRONG> is built with a support for reading term-
- cap files directly, then an entry in this list may be
- the path of a termcap file.
-
- TERMPATH
- If TERMCAP does not hold a file name then <STRONG>ncurses</STRONG>
- checks the TERMPATH environment variable. This is a
- list of filenames separated by spaces or colons
- (i.e., ":") on Unix, semicolons on OS/2 EMX.
-
- If the TERMPATH environment variable is not set,
- <STRONG>ncurses</STRONG> looks in the files /etc/termcap,
- /usr/share/misc/termcap and $HOME/.termcap, in that
- order.
-
- The library may be configured to disregard the following
- variables when the current user is the superuser (root),
+ <STRONG>CC</STRONG>
+ When set, change occurrences of the command_character
+ (i.e., the <STRONG>cmdch</STRONG> capability) of the loaded terminfo
+ entries to the value of this variable. Very few terminfo
+ entries provide this feature.
+
+ Because this name is also used in development environments
+ to represent the C compiler's name, <STRONG>ncurses</STRONG> ignores it if
+ it does not happen to be a single character.
+
+
+</PRE><H3><a name="h3-BAUDRATE">BAUDRATE</a></H3><PRE>
+ The debugging library checks this environment variable
+ when the application has redirected output to a file. The
+ variable's numeric value is used for the baudrate. If no
+ value is found, <STRONG>ncurses</STRONG> uses 9600. This allows testers to
+ construct repeatable test-cases that take into account
+ costs that depend on baudrate.
+
+
+</PRE><H3><a name="h3-COLUMNS">COLUMNS</a></H3><PRE>
+ Specify the width of the screen in characters. Applica-
+ tions running in a windowing environment usually are able
+ to obtain the width of the window in which they are exe-
+ cuting. If neither the <STRONG>COLUMNS</STRONG> value nor the terminal's
+ screen size is available, <STRONG>ncurses</STRONG> uses the size which may
+ be specified in the terminfo database (i.e., the <STRONG>cols</STRONG>
+ capability).
+
+ It is important that your application use a correct size
+ for the screen. This is not always possible because your
+ application may be running on a host which does not honor
+ NAWS (Negotiations About Window Size), or because you are
+ temporarily running as another user. However, setting
+ <STRONG>COLUMNS</STRONG> and/or <STRONG>LINES</STRONG> overrides the library's use of the
+ screen size obtained from the operating system.
+
+ Either <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> symbols may be specified indepen-
+ dently. This is mainly useful to circumvent legacy mis-
+ features of terminal descriptions, e.g., xterm which com-
+ monly specifies a 65 line screen. For best results, <STRONG>lines</STRONG>
+ and <STRONG>cols</STRONG> should not be specified in a terminal description
+ for terminals which are run as emulations.
+
+ Use the <STRONG>use_env</STRONG> function to disable all use of external
+ environment (but not including system calls) to determine
+ the screen size. Use the <STRONG>use_tioctl</STRONG> function to update
+ <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> to match the screen size obtained from
+ system calls or the terminal database.
+
+
+</PRE><H3><a name="h3-ESCDELAY">ESCDELAY</a></H3><PRE>
+ Specifies the total time, in milliseconds, for which
+ ncurses will await a character sequence, e.g., a function
+ key. The default value, 1000 milliseconds, is enough for
+ most uses. However, it is made a variable to accommodate
+ unusual applications.
+
+ The most common instance where you may wish to change this
+ value is to work with slow hosts, e.g., running on a net-
+ work. If the host cannot read characters rapidly enough,
+ it will have the same effect as if the terminal did not
+ send characters rapidly enough. The library will still
+ see a timeout.
+
+ Note that xterm mouse events are built up from character
+ sequences received from the xterm. If your application
+ makes heavy use of multiple-clicking, you may wish to
+ lengthen this default value because the timeout applies to
+ the composed multi-click event as well as the individual
+ clicks.
+
+ In addition to the environment variable, this implementa-
+ tion provides a global variable with the same name. Por-
+ table applications should not rely upon the presence of
+ ESCDELAY in either form, but setting the environment vari-
+ able rather than the global variable does not create prob-
+ lems when compiling an application.
+
+
+</PRE><H3><a name="h3-HOME">HOME</a></H3><PRE>
+ Tells <STRONG>ncurses</STRONG> where your home directory is. That is where
+ it may read and write auxiliary terminal descriptions:
+
+ $HOME/.termcap
+ $HOME/.terminfo
+
+
+</PRE><H3><a name="h3-LINES">LINES</a></H3><PRE>
+ Like COLUMNS, specify the height of the screen in charac-
+ ters. See COLUMNS for a detailed description.
+
+
+</PRE><H3><a name="h3-MOUSE_BUTTONS_123">MOUSE_BUTTONS_123</a></H3><PRE>
+ This applies only to the OS/2 EMX port. It specifies the
+ order of buttons on the mouse. OS/2 numbers a 3-button
+ mouse inconsistently from other platforms:
+
+ 1 = left
+ 2 = right
+ 3 = middle.
+
+ This variable lets you customize the mouse. The variable
+ must be three numeric digits 1-3 in any order, e.g., 123
+ or 321. If it is not specified, <STRONG>ncurses</STRONG> uses 132.
+
+
+</PRE><H3><a name="h3-NCURSES_ASSUMED_COLORS">NCURSES_ASSUMED_COLORS</a></H3><PRE>
+ Override the compiled-in assumption that the terminal's
+ default colors are white-on-black (see <STRONG>default_col-</STRONG>
+ <STRONG><A HREF="default_colors.3x.html">ors(3x)</A></STRONG>). You may set the foreground and background color
+ values with this environment variable by proving a 2-ele-
+ ment list: foreground,background. For example, to tell
+ ncurses to not assume anything about the colors, set this
+ to "-1,-1". To make it green-on-black, set it to "2,0".
+ Any positive value from zero to the terminfo <STRONG>max_colors</STRONG>
+ value is allowed.
+
+
+</PRE><H3><a name="h3-NCURSES_CONSOLE2">NCURSES_CONSOLE2</a></H3><PRE>
+ This applies only to the MinGW port of ncurses.
+
+ The <STRONG>Console2</STRONG> program's handling of the Microsoft Console
+ API call <STRONG>CreateConsoleScreenBuffer</STRONG> is defective. Applica-
+ tions which use this will hang. However, it is possible
+ to simulate the action of this call by mapping coordi-
+ nates, explicitly saving and restoring the original screen
+ contents. Setting the environment variable <STRONG>NCGDB</STRONG> has the
+ same effect.
+
+
+</PRE><H3><a name="h3-NCURSES_GPM_TERMS">NCURSES_GPM_TERMS</a></H3><PRE>
+ This applies only to ncurses configured to use the GPM
+ interface.
+
+ If present, the environment variable is a list of one or
+ more terminal names against which the <STRONG>TERM</STRONG> environment
+ variable is matched. Setting it to an empty value dis-
+ ables the GPM interface; using the built-in support for
+ xterm, etc.
+
+ If the environment variable is absent, ncurses will
+ attempt to open GPM if <STRONG>TERM</STRONG> contains "linux".
+
+
+</PRE><H3><a name="h3-NCURSES_NO_HARD_TABS">NCURSES_NO_HARD_TABS</a></H3><PRE>
+ <STRONG>Ncurses</STRONG> may use tabs as part of the cursor movement opti-
+ mization. In some cases, your terminal driver may not
+ handle these properly. Set this environment variable to
+ disable the feature. You can also adjust your <STRONG>stty</STRONG> set-
+ tings to avoid the problem. NCURSES_NO_MAGIC_COOKIE Some
+ terminals use a magic-cookie feature which requires spe-
+ cial handling to make highlighting and other video
+ attributes display properly. You can suppress the high-
+ lighting entirely for these terminals by setting this
+ environment variable.
+
+
+</PRE><H3><a name="h3-NCURSES_NO_PADDING">NCURSES_NO_PADDING</a></H3><PRE>
+ Most of the terminal descriptions in the terminfo database
+ are written for real "hardware" terminals. Many people
+ use terminal emulators which run in a windowing environ-
+ ment and use curses-based applications. Terminal emula-
+ tors can duplicate all of the important aspects of a hard-
+ ware terminal, but they do not have the same limitations.
+ The chief limitation of a hardware terminal from the
+ standpoint of your application is the management of
+ dataflow, i.e., timing. Unless a hardware terminal is
+ interfaced into a terminal concentrator (which does flow
+ control), it (or your application) must manage dataflow,
+ preventing overruns. The cheapest solution (no hardware
+ cost) is for your program to do this by pausing after
+ operations that the terminal does slowly, such as clearing
+ the display.
+
+ As a result, many terminal descriptions (including the
+ vt100) have delay times embedded. You may wish to use
+ these descriptions, but not want to pay the performance
+ penalty.
+
+ Set the NCURSES_NO_PADDING environment variable to disable
+ all but mandatory padding. Mandatory padding is used as a
+ part of special control sequences such as <EM>flash</EM>.
+
+
+</PRE><H3><a name="h3-NCURSES_NO_SETBUF">NCURSES_NO_SETBUF</a></H3><PRE>
+ This setting is obsolete. Before changes
+
+ <STRONG>o</STRONG> started with 5.9 patch 20120825 and
+
+ <STRONG>o</STRONG> continued though 5.9 patch 20130126
+
+ <STRONG>ncurses</STRONG> enabled buffered output during terminal initial-
+ ization. This was done (as in SVr4 curses) for perfor-
+ mance reasons. For testing purposes, both of <STRONG>ncurses</STRONG> and
+ certain applications, this feature was made optional.
+ Setting the NCURSES_NO_SETBUF variable disabled output
+ buffering, leaving the output in the original (usually
+ line buffered) mode.
+
+ In the current implementation, ncurses performs its own
+ buffering and does not require this workaround. It does
+ not modify the buffering of the standard output.
+
+ The reason for the change was to make the behavior for
+ interrupts and other signals more robust. One drawback is
+ that certain nonconventional programs would mix ordinary
+ stdio calls with ncurses calls and (usually) work. This
+ is no longer possible since ncurses is not using the
+ buffered standard output but its own output (to the same
+ file descriptor). As a special case, the low-level calls
+ such as <STRONG>putp</STRONG> still use the standard output. But high-
+ level curses calls do not.
+
+
+</PRE><H3><a name="h3-NCURSES_NO_UTF8_ACS">NCURSES_NO_UTF8_ACS</a></H3><PRE>
+ During initialization, the <STRONG>ncurses</STRONG> library checks for spe-
+ cial cases where VT100 line-drawing (and the corresponding
+ alternate character set capabilities) described in the
+ terminfo are known to be missing. Specifically, when run-
+ ning in a UTF-8 locale, the Linux console emulator and the
+ GNU screen program ignore these. Ncurses checks the <STRONG>TERM</STRONG>
+ environment variable for these. For other special cases,
+ you should set this environment variable. Doing this
+ tells ncurses to use Unicode values which correspond to
+ the VT100 line-drawing glyphs. That works for the special
+ cases cited, and is likely to work for terminal emulators.
+
+ When setting this variable, you should set it to a nonzero
+ value. Setting it to zero (or to a nonnumber) disables
+ the special check for "linux" and "screen".
+
+ As an alternative to the environment variable, ncurses
+ checks for an extended terminfo capability <STRONG>U8</STRONG>. This is a
+ numeric capability which can be compiled using <STRONG>tic</STRONG> <STRONG>-x</STRONG>.
+ For example
+
+ # linux console, if patched to provide working
+ # VT100 shift-in/shift-out, with corresponding font.
+ linux-vt100|linux console with VT100 line-graphics,
+ U8#0, use=linux,
+
+ # uxterm with vt100Graphics resource set to false
+ xterm-utf8|xterm relying on UTF-8 line-graphics,
+ U8#1, use=xterm,
+
+ The name "U8" is chosen to be two characters, to permit it
+ to be used by applications that use ncurses' termcap
+ interface.
+
+
+</PRE><H3><a name="h3-NCURSES_TRACE">NCURSES_TRACE</a></H3><PRE>
+ During initialization, the <STRONG>ncurses</STRONG> debugging library
+ checks the NCURSES_TRACE environment variable. If it is
+ defined, to a numeric value, <STRONG>ncurses</STRONG> calls the <STRONG>trace</STRONG> func-
+ tion, using that value as the argument.
+
+ The argument values, which are defined in <STRONG>curses.h</STRONG>, pro-
+ vide several types of information. When running with
+ traces enabled, your application will write the file <STRONG>trace</STRONG>
+ to the current directory.
+
+ See <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG> for more information.
+
+
+</PRE><H3><a name="h3-TERM">TERM</a></H3><PRE>
+ Denotes your terminal type. Each terminal type is dis-
+ tinct, though many are similar.
+
+ <STRONG>TERM</STRONG> is commonly set by terminal emulators to help appli-
+ cations find a workable terminal description. Some of
+ those choose a popular approximation, e.g., "ansi",
+ "vt100", "xterm" rather than an exact fit. Not infre-
+ quently, your application will have problems with that
+ approach, e.g., incorrect function-key definitions.
+
+ If you set <STRONG>TERM</STRONG> in your environment, it has no effect on
+ the operation of the terminal emulator. It only affects
+ the way applications work within the terminal. Likewise,
+ as a general rule (<STRONG>xterm</STRONG> being a rare exception), terminal
+ emulators which allow you to specify <STRONG>TERM</STRONG> as a parameter
+ or configuration value do not change their behavior to
+ match that setting.
+
+
+</PRE><H3><a name="h3-TERMCAP">TERMCAP</a></H3><PRE>
+ If the <STRONG>ncurses</STRONG> library has been configured with <EM>termcap</EM>
+ support, <STRONG>ncurses</STRONG> will check for a terminal's description
+ in termcap form if it is not available in the terminfo
+ database.
+
+ The <STRONG>TERMCAP</STRONG> environment variable contains either a termi-
+ nal description (with newlines stripped out), or a file
+ name telling where the information denoted by the <STRONG>TERM</STRONG>
+ environment variable exists. In either case, setting it
+ directs <STRONG>ncurses</STRONG> to ignore the usual place for this infor-
+ mation, e.g., /etc/termcap.
+
+
+</PRE><H3><a name="h3-TERMINFO">TERMINFO</a></H3><PRE>
+ <STRONG>ncurses</STRONG> can be configured to read from multiple terminal
+ databases. The <STRONG>TERMINFO</STRONG> variable overrides the location
+ for the default terminal database. Terminal descriptions
+ (in terminal format) are stored in terminal databases:
+
+ <STRONG>o</STRONG> Normally these are stored in a directory tree, using
+ subdirectories named by the first letter of the termi-
+ nal names therein.
+
+ This is the scheme used in System V, which legacy Unix
+ systems use, and the <STRONG>TERMINFO</STRONG> variable is used by
+ <EM>curses</EM> applications on those systems to override the
+ default location of the terminal database.
+
+ <STRONG>o</STRONG> If <STRONG>ncurses</STRONG> is built to use hashed databases, then each
+ entry in this list may be the path of a hashed data-
+ base file, e.g.,
+
+ /usr/share/terminfo.db
+
+ rather than
+
+ /usr/share/terminfo/
+
+ The hashed database uses less disk-space and is a lit-
+ tle faster than the directory tree. However, some
+ applications assume the existence of the directory
+ tree, reading it directly rather than using the ter-
+ minfo library calls.
+
+ <STRONG>o</STRONG> If <STRONG>ncurses</STRONG> is built with a support for reading termcap
+ files directly, then an entry in this list may be the
+ path of a termcap file.
+
+ <STRONG>o</STRONG> If the <STRONG>TERMINFO</STRONG> variable begins with "hex:" or "b64:",
+ <STRONG>ncurses</STRONG> uses the remainder of that variable as a com-
+ piled terminal description. You might produce the
+ base64 format using <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>:
+
+ TERMINFO="$(infocmp -0 -Q2 -q)"
+ export TERMINFO
+
+ The compiled description is used if it corresponds to
+ the terminal identified by the <STRONG>TERM</STRONG> variable.
+
+ Setting <STRONG>TERMINFO</STRONG> is the simplest, but not the only way to
+ set location of the default terminal database. The com-
+ plete list of database locations in order follows:
+
+ <STRONG>o</STRONG> the last terminal database to which <STRONG>ncurses</STRONG> wrote,
+ if any, is searched first
+
+ <STRONG>o</STRONG> the location specified by the TERMINFO environment
+ variable
+
+ <STRONG>o</STRONG> $HOME/.terminfo
+
+ <STRONG>o</STRONG> locations listed in the TERMINFO_DIRS environment
+ variable
+
+ <STRONG>o</STRONG> one or more locations whose names are configured
+ and compiled into the ncurses library, i.e.,
+
+ <STRONG>o</STRONG> /usr/local/ncurses/share/ter-
+ minfo:/usr/share/terminfo (corresponding to the
+ TERMINFO_DIRS variable)
+
+ <STRONG>o</STRONG> /usr/share/terminfo (corresponding to the TER-
+ MINFO variable)
+
+
+</PRE><H3><a name="h3-TERMINFO_DIRS">TERMINFO_DIRS</a></H3><PRE>
+ Specifies a list of locations to search for terminal
+ descriptions. Each location in the list is a terminal
+ database as described in the section on the <STRONG>TERMINFO</STRONG> vari-
+ able. The list is separated by colons (i.e., ":") on
+ Unix, semicolons on OS/2 EMX.
+
+ There is no corresponding feature in System V terminfo; it
+ is an extension developed for <STRONG>ncurses</STRONG>.
+
+
+</PRE><H3><a name="h3-TERMPATH">TERMPATH</a></H3><PRE>
+ If <STRONG>TERMCAP</STRONG> does not hold a file name then <STRONG>ncurses</STRONG> checks
+ the <STRONG>TERMPATH</STRONG> environment variable. This is a list of
+ filenames separated by spaces or colons (i.e., ":") on
+ Unix, semicolons on OS/2 EMX.
+
+ If the <STRONG>TERMPATH</STRONG> environment variable is not set, <STRONG>ncurses</STRONG>
+ looks in the files
+
+ /etc/termcap, /usr/share/misc/termcap and $HOME/.termcap,
+
+ in that order.
+
+ The library may be configured to disregard the following
+ variables when the current user is the superuser (root),
or if the application uses setuid or setgid permissions:
- $TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as
- $HOME.
+ $TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as $HOME.
-</PRE>
-<H2><a name="h2-ALTERNATE-CONFIGURATIONS">ALTERNATE CONFIGURATIONS</a></H2><PRE>
+</PRE><H2><a name="h2-ALTERNATE-CONFIGURATIONS">ALTERNATE CONFIGURATIONS</a></H2><PRE>
Several different configurations are possible, depending
on the configure script options used when building
<STRONG>ncurses</STRONG>. There are a few main options whose effects are
The standard include for <STRONG>ncurses</STRONG> is as noted in <STRONG>SYN-</STRONG>
<STRONG>OPSIS</STRONG>:
- <STRONG>#include</STRONG> <STRONG><curses.h></STRONG>
+ <STRONG>#include</STRONG> <STRONG><curses.h></STRONG>
This option is used to avoid filename conflicts when
<STRONG>ncurses</STRONG> is not the main implementation of curses of
overwrite, it puts its headers in a subdirectory,
e.g.,
- <STRONG>#include</STRONG> <STRONG><ncurses/curses.h></STRONG>
+ <STRONG>#include</STRONG> <STRONG><ncurses/curses.h></STRONG>
It also omits a symbolic link which would allow you
to use <STRONG>-lcurses</STRONG> to build executables.
library names have a "w" appended to them, i.e.,
instead of
- <STRONG>-lncurses</STRONG>
+ <STRONG>-lncurses</STRONG>
you link with
- <STRONG>-lncursesw</STRONG>
+ <STRONG>-lncursesw</STRONG>
You must also define <STRONG>_XOPEN_SOURCE_EXTENDED</STRONG> when com-
piling for the wide-character library to use the
ing it is always in the debug library.
-</PRE>
-<H2><a name="h2-FILES">FILES</a></H2><PRE>
+</PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
/usr/share/tabset
directory containing initialization files for the
terminal capability database /usr/share/terminfo ter-
minal capability database
-</PRE>
-<H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
+</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> and related pages whose names begin "curs_"
for detailed routine descriptions.
<STRONG><A HREF="curs_variables.3x.html">curs_variables(3x)</A></STRONG>
-</PRE>
-<H2><a name="h2-EXTENSIONS">EXTENSIONS</a></H2><PRE>
+</PRE><H2><a name="h2-EXTENSIONS">EXTENSIONS</a></H2><PRE>
The <STRONG>ncurses</STRONG> library can be compiled with an option
(<STRONG>-DUSE_GETCAP</STRONG>) that falls back to the old-style /etc/term-
cap file if the terminal setup code cannot find a terminfo
device. See the <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG> manual page for details.
-</PRE>
-<H2><a name="h2-PORTABILITY">PORTABILITY</a></H2><PRE>
+</PRE><H2><a name="h2-PORTABILITY">PORTABILITY</a></H2><PRE>
The <STRONG>ncurses</STRONG> library is intended to be BASE-level confor-
mant with XSI Curses. The EXTENDED XSI Curses functional-
ity (including color support) is supported.
package's portability correspondingly.
-</PRE>
-<H2><a name="h2-NOTES">NOTES</a></H2><PRE>
+</PRE><H2><a name="h2-NOTES">NOTES</a></H2><PRE>
The header file <STRONG><curses.h></STRONG> automatically includes the
header files <STRONG><stdio.h></STRONG> and <STRONG><unctrl.h></STRONG>.
ture of AT&T System V Release 3 curses.
-</PRE>
-<H2><a name="h2-AUTHORS">AUTHORS</a></H2><PRE>
+</PRE><H2><a name="h2-AUTHORS">AUTHORS</a></H2><PRE>
Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey.
Based on pcurses by Pavel Curtis.
<li><a href="#h2-SYNOPSIS">SYNOPSIS</a></li>
<li><a href="#h2-DESCRIPTION">DESCRIPTION</a>
<ul>
+<li><a href="#h3-Initialization">Initialization</a></li>
+<li><a href="#h3-Datatypes">Datatypes</a></li>
+<li><a href="#h3-Environment-variables">Environment variables</a></li>
<li><a href="#h3-Routine-and-Argument-Names">Routine and Argument Names</a></li>
<li><a href="#h3-Routine-Name-Index">Routine Name Index</a></li>
</ul>
</li>
<li><a href="#h2-RETURN-VALUE">RETURN VALUE</a></li>
-<li><a href="#h2-ENVIRONMENT">ENVIRONMENT</a></li>
+<li><a href="#h2-ENVIRONMENT">ENVIRONMENT</a>
+<ul>
+<li><a href="#h3-BAUDRATE">BAUDRATE</a></li>
+<li><a href="#h3-COLUMNS">COLUMNS</a></li>
+<li><a href="#h3-ESCDELAY">ESCDELAY</a></li>
+<li><a href="#h3-HOME">HOME</a></li>
+<li><a href="#h3-LINES">LINES</a></li>
+<li><a href="#h3-MOUSE_BUTTONS_123">MOUSE_BUTTONS_123</a></li>
+<li><a href="#h3-NCURSES_ASSUMED_COLORS">NCURSES_ASSUMED_COLORS</a></li>
+<li><a href="#h3-NCURSES_CONSOLE2">NCURSES_CONSOLE2</a></li>
+<li><a href="#h3-NCURSES_GPM_TERMS">NCURSES_GPM_TERMS</a></li>
+<li><a href="#h3-NCURSES_NO_HARD_TABS">NCURSES_NO_HARD_TABS</a></li>
+<li><a href="#h3-NCURSES_NO_PADDING">NCURSES_NO_PADDING</a></li>
+<li><a href="#h3-NCURSES_NO_SETBUF">NCURSES_NO_SETBUF</a></li>
+<li><a href="#h3-NCURSES_NO_UTF8_ACS">NCURSES_NO_UTF8_ACS</a></li>
+<li><a href="#h3-NCURSES_TRACE">NCURSES_TRACE</a></li>
+<li><a href="#h3-TERM">TERM</a></li>
+<li><a href="#h3-TERMCAP">TERMCAP</a></li>
+<li><a href="#h3-TERMINFO">TERMINFO</a></li>
+<li><a href="#h3-TERMINFO_DIRS">TERMINFO_DIRS</a></li>
+<li><a href="#h3-TERMPATH">TERMPATH</a></li>
+</ul>
+</li>
<li><a href="#h2-ALTERNATE-CONFIGURATIONS">ALTERNATE CONFIGURATIONS</a></li>
<li><a href="#h2-FILES">FILES</a></li>
<li><a href="#h2-SEE-ALSO">SEE ALSO</a></li>
projects / ncurses.git / blobdiff