ncurses 6.0 - patch 20170422
[ncurses.git] / doc / html / man / ncurses.3x.html
index c2373647265cb382892e85a51374654256d79d5a..3e409223c43285a98f3225215bb80622cec62350 100644 (file)
@@ -1,7 +1,7 @@
 <!-- 
   * t
   ****************************************************************************
-  * Copyright (c) 1998-2014,2015 Free Software Foundation, Inc.              *
+  * Copyright (c) 1998-2015,2017 Free Software Foundation, Inc.              *
   *                                                                          *
   * Permission is hereby granted, free of charge, to any person obtaining a  *
   * copy of this software and associated documentation files (the            *
@@ -27,7 +27,7 @@
   * sale, use or other dealings in this Software without prior written       *
   * authorization.                                                           *
   ****************************************************************************
-  * @Id: ncurses.3x,v 1.124 2015/08/08 14:57:51 tom Exp @
+  * @Id: ncurses.3x,v 1.131 2017/03/25 20:45:48 tom Exp @
 -->
 <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
 <HTML>
@@ -60,7 +60,7 @@
        sonable optimization.  This implementation is "new curses"
        (ncurses) and is the approved replacement for 4.4BSD clas-
        sic  curses,  which has been discontinued.  This describes
-       <STRONG>ncurses</STRONG> version 6.0 (patch 20160611).
+       <STRONG>ncurses</STRONG> version 6.0 (patch 20170422).
 
        The <STRONG>ncurses</STRONG> library emulates the curses library of  System
        V  Release  4  UNIX,  and  XPG4 (X/Open Portability Guide)
        The  library uses the locale which the calling program has
        initialized.  That is normally done with <STRONG>setlocale</STRONG>:
 
-             <STRONG>setlocale(LC_ALL,</STRONG> <STRONG>"");</STRONG>
-
-       If the locale is not initialized, the library assumes that
-       characters  are  printable  as in ISO-8859-1, to work with
-       certain legacy programs.  You should initialize the locale
-       and  not  rely on specific details of the library when the
-       locale has not been setup.
+               <STRONG>setlocale(LC_ALL,</STRONG> <STRONG>"");</STRONG>
+     If the locale is not initialized, the library  assumes  that
+     characters are printable as in ISO-8859-1, to work with cer-
+     tain legacy programs.  You should initialize the locale  and
+     not  rely on specific details of the library when the locale
+     has not been setup.
 
        The function <STRONG>initscr</STRONG> or <STRONG>newterm</STRONG> must be called to initial-
        ize the library before any of the other routines that deal
-       with windows and screens are  used.   The  routine  <STRONG>endwin</STRONG>
+       with windows and screens are used.  The routine <STRONG><A HREF="curs_initscr.3x.html">endwin(3x)</A></STRONG>
        must be called before exiting.
 
        To  get  character-at-a-time  input  without echoing (most
        interactive, screen oriented programs want this), the fol-
        lowing sequence should be used:
 
-             <STRONG>initscr();</STRONG> <STRONG>cbreak();</STRONG> <STRONG>noecho();</STRONG>
-
-       Most programs would additionally use the sequence:
+               <STRONG>initscr();</STRONG> <STRONG>cbreak();</STRONG> <STRONG>noecho();</STRONG>
+     Most programs would additionally use the sequence:
 
              <STRONG>nonl();</STRONG>
              <STRONG>intrflush(stdscr,</STRONG> <STRONG>FALSE);</STRONG>
              <STRONG>keypad(stdscr,</STRONG> <STRONG>TRUE);</STRONG>
-
-       Before  a <STRONG>curses</STRONG> program is run, the tab stops of the ter-
-       minal should be set and  its  initialization  strings,  if
-       defined,  must  be  output.  This can be done by executing
-       the <STRONG>tput</STRONG> <STRONG>init</STRONG> command after the shell environment variable
-       <STRONG>TERM</STRONG>  has  been  exported.  <STRONG>tset(1)</STRONG> is usually responsible
-       for doing this.  [See <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> for further details.]
+   Before  a <STRONG>curses</STRONG> program is run, the tab stops of the terminal
+   should be set and its initialization strings, if defined, must
+   be  output.   This can be done by executing the <STRONG>tput</STRONG> <STRONG>init</STRONG> com-
+   mand after  the  shell  environment  variable  <STRONG>TERM</STRONG>  has  been
+   exported.   <STRONG>tset(1)</STRONG>  is  usually  responsible  for doing this.
+   [See <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> for further details.]
 
 
 </PRE><H3><a name="h3-Datatypes">Datatypes</a></H3><PRE>
        names beginning with <STRONG>w</STRONG>, allowing the  user  to  specify  a
        window.  The routines not beginning with <STRONG>w</STRONG> affect <STRONG>stdscr</STRONG>.
 
-       After  using  routines  to manipulate a window, <STRONG>refresh</STRONG> is
-       called, telling <STRONG>curses</STRONG> to make the user's CRT screen  look
-       like  <STRONG>stdscr</STRONG>.   The characters in a window are actually of
-       type <STRONG>chtype</STRONG>, (character and attribute data) so that  other
-       information  about  the  character may also be stored with
-       each character.
+       After  using  routines to manipulate a window, <STRONG><A HREF="curs_refresh.3x.html">refresh(3x)</A></STRONG>
+       is called, telling <STRONG>curses</STRONG> to make the  user's  CRT  screen
+       look like <STRONG>stdscr</STRONG>.  The characters in a window are actually
+       of type <STRONG>chtype</STRONG>, (character and  attribute  data)  so  that
+       other  information  about the character may also be stored
+       with each character.
 
        Special windows  called  <EM>pads</EM>  may  also  be  manipulated.
        These are windows which are not constrained to the size of
        <STRONG>TERM</STRONG> is set to <STRONG>att4424</STRONG>, then the compiled terminal defini-
        tion is found in
 
-             <STRONG>/usr/share/terminfo/a/att4424</STRONG>.
-
-       (The <STRONG>a</STRONG> is copied from the first letter of <STRONG>att4424</STRONG> to avoid
-       creation of huge directories.)  However,  if  <STRONG>TERMINFO</STRONG>  is
-       set to <STRONG>$HOME/myterms</STRONG>, <STRONG>curses</STRONG> first checks
+               <STRONG>/usr/share/terminfo/a/att4424</STRONG>.
+     (The  <STRONG>a</STRONG>  is copied from the first letter of <STRONG>att4424</STRONG> to avoid
+     creation of huge directories.)  However, if <STRONG>TERMINFO</STRONG> is  set
+     to <STRONG>$HOME/myterms</STRONG>, <STRONG>curses</STRONG> first checks
 
              <STRONG>$HOME/myterms/a/att4424</STRONG>,
+   and if that fails, it then checks
 
-       and if that fails, it then checks
-
-             <STRONG>/usr/share/terminfo/a/att4424</STRONG>.
-
-       This  is useful for developing experimental definitions or
-       when write permission in <STRONG>/usr/share/terminfo</STRONG> is not avail-
-       able.
+           <STRONG>/usr/share/terminfo/a/att4424</STRONG>.
+ This  is  useful for developing experimental definitions or when
+ write permission in <STRONG>/usr/share/terminfo</STRONG> is not available.
 
-       The  integer  variables  <STRONG>LINES</STRONG>  and  <STRONG>COLS</STRONG>  are  defined in
-       <STRONG>&lt;curses.h&gt;</STRONG> and will be filled in by <STRONG>initscr</STRONG> with the  size
+       The integer  variables  <STRONG>LINES</STRONG>  and  <STRONG>COLS</STRONG>  are  defined  in
+       <STRONG>&lt;curses.h&gt;</STRONG>  and will be filled in by <STRONG>initscr</STRONG> with the size
        of the screen.  The constants <STRONG>TRUE</STRONG> and <STRONG>FALSE</STRONG> have the val-
        ues <STRONG>1</STRONG> and <STRONG>0</STRONG>, respectively.
 
-       The <STRONG>curses</STRONG> routines also  define  the  <STRONG>WINDOW</STRONG>  <STRONG>*</STRONG>  variable
+       The  <STRONG>curses</STRONG>  routines  also  define  the <STRONG>WINDOW</STRONG> <STRONG>*</STRONG> variable
        <STRONG>curscr</STRONG> which is used for certain low-level operations like
-       clearing and redrawing a screen containing  garbage.   The
+       clearing  and  redrawing a screen containing garbage.  The
        <STRONG>curscr</STRONG> can be used in only a few routines.
 
 
 </PRE><H3><a name="h3-Routine-and-Argument-Names">Routine and Argument Names</a></H3><PRE>
-       Many  <STRONG>curses</STRONG> routines have two or more versions.  The rou-
+       Many <STRONG>curses</STRONG> routines have two or more versions.  The  rou-
        tines prefixed with <STRONG>w</STRONG> require a window argument.  The rou-
        tines prefixed with <STRONG>p</STRONG> require a pad argument.  Those with-
        out a prefix generally use <STRONG>stdscr</STRONG>.
 
        The routines prefixed with <STRONG>mv</STRONG> require a <EM>y</EM> and <EM>x</EM> coordinate
-       to  move to before performing the appropriate action.  The
-       <STRONG>mv</STRONG> routines imply a call to <STRONG>move</STRONG> before the  call  to  the
-       other  routine.  The coordinate <EM>y</EM> always refers to the row
-       (of the window), and <EM>x</EM> always refers to the  column.   The
+       to move to before performing the appropriate action.   The
+       <STRONG>mv</STRONG>  routines  imply  a call to <STRONG>move</STRONG> before the call to the
+       other routine.  The coordinate <EM>y</EM> always refers to the  row
+       (of  the  window), and <EM>x</EM> always refers to the column.  The
        upper left-hand corner is always (0,0), not (1,1).
 
        The routines prefixed with <STRONG>mvw</STRONG> take both a window argument
-       and <EM>x</EM> and <EM>y</EM> coordinates.  The window  argument  is  always
+       and  <EM>x</EM>  and  <EM>y</EM> coordinates.  The window argument is always
        specified before the coordinates.
 
-       In  each  case, <EM>win</EM> is the window affected, and <EM>pad</EM> is the
+       In each case, <EM>win</EM> is the window affected, and <EM>pad</EM>  is  the
        pad affected; <EM>win</EM> and <EM>pad</EM> are always pointers to type <STRONG>WIN-</STRONG>
        <STRONG>DOW</STRONG>.
 
        Option setting routines require a Boolean flag <EM>bf</EM> with the
-       value <STRONG>TRUE</STRONG> or <STRONG>FALSE</STRONG>; <EM>bf</EM> is always of type <STRONG>bool</STRONG>.   Most  of
-       the  data types used in the library routines, such as <STRONG>WIN-</STRONG>
-       <STRONG>DOW</STRONG>, <STRONG>SCREEN</STRONG>, <STRONG>bool</STRONG>, and <STRONG>chtype</STRONG> are defined  in  <STRONG>&lt;curses.h&gt;</STRONG>.
-       Types  used for the terminfo routines such as <STRONG>TERMINAL</STRONG> are
+       value  <STRONG>TRUE</STRONG>  or <STRONG>FALSE</STRONG>; <EM>bf</EM> is always of type <STRONG>bool</STRONG>.  Most of
+       the data types used in the library routines, such as  <STRONG>WIN-</STRONG>
+       <STRONG>DOW</STRONG>,  <STRONG>SCREEN</STRONG>,  <STRONG>bool</STRONG>, and <STRONG>chtype</STRONG> are defined in <STRONG>&lt;curses.h&gt;</STRONG>.
+       Types used for the terminfo routines such as <STRONG>TERMINAL</STRONG>  are
        defined in <STRONG>&lt;term.h&gt;</STRONG>.
 
-       This manual page describes functions which may  appear  in
-       any  configuration  of  the library.  There are two common
+       This  manual  page describes functions which may appear in
+       any configuration of the library.  There  are  two  common
        configurations of the library:
 
           <EM>ncurses</EM>
-               the "normal" library, which handles 8-bit  charac-
-               ters.   The  normal (8-bit) library stores charac-
+               the  "normal" library, which handles 8-bit charac-
+               ters.  The normal (8-bit) library  stores  charac-
                ters combined with attributes in <STRONG>chtype</STRONG> data.
 
-               Attributes alone (no corresponding character)  may
+               Attributes  alone (no corresponding character) may
                be stored in <STRONG>chtype</STRONG> or the equivalent <STRONG>attr_t</STRONG> data.
-               In either case, the data is  stored  in  something
+               In  either  case,  the data is stored in something
                like an integer.
 
-               Each  cell  (row and column) in a <STRONG>WINDOW</STRONG> is stored
+               Each cell (row and column) in a <STRONG>WINDOW</STRONG>  is  stored
                as a <STRONG>chtype</STRONG>.
 
           <EM>ncursesw</EM>
                the so-called "wide" library, which handles multi-
                byte characters (see the section on <STRONG>ALTERNATE</STRONG> <STRONG>CON-</STRONG>
-               <STRONG>FIGURATIONS</STRONG>).  The "wide" library includes all  of
-               the  calls  from  the  "normal"  library.  It adds
-               about one third more calls using data types  which
+               <STRONG>FIGURATIONS</STRONG>).   The "wide" library includes all of
+               the calls from  the  "normal"  library.   It  adds
+               about  one third more calls using data types which
                store multibyte characters:
 
                <STRONG>cchar_t</STRONG>
                     corresponds  to  <STRONG>chtype</STRONG>.   However  it  is  a
-                    structure, because more data is  stored  than
-                    can  fit into an integer.  The characters are
-                    large enough to require a full integer  value
-                    -  and  there  may be more than one character
+                    structure,  because  more data is stored than
+                    can fit into an integer.  The characters  are
+                    large  enough to require a full integer value
+                    - and there may be more  than  one  character
                     per cell.  The video attributes and color are
                     stored in separate fields of the structure.
 
-                    Each  cell  (row  and  column) in a <STRONG>WINDOW</STRONG> is
+                    Each cell (row and column)  in  a  <STRONG>WINDOW</STRONG>  is
                     stored as a <STRONG>cchar_t</STRONG>.
 
                <STRONG>wchar_t</STRONG>
                     may be an integer.
 
                <STRONG>wint_t</STRONG>
-                    stores  a  <STRONG>wchar_t</STRONG>  or  <STRONG>WEOF</STRONG>  - not the same,
+                    stores a <STRONG>wchar_t</STRONG> or  <STRONG>WEOF</STRONG>  -  not  the  same,
                     though both may have the same size.
 
-               The "wide" library provides  new  functions  which
-               are   analogous   to  functions  in  the  "normal"
+               The  "wide"  library  provides new functions which
+               are  analogous  to  functions  in   the   "normal"
                library.   There  is  a  naming  convention  which
-               relates  many  of the normal/wide variants: a "_w"
-               is inserted into the name.   For  example,  <STRONG>waddch</STRONG>
+               relates many of the normal/wide variants:  a  "_w"
+               is  inserted  into  the name.  For example, <STRONG>waddch</STRONG>
                becomes <STRONG>wadd_wch</STRONG>.
 
 
 </PRE><H3><a name="h3-Routine-Name-Index">Routine Name Index</a></H3><PRE>
        The following table lists each <STRONG>curses</STRONG> routine and the name
-       of the manual page on which  it  is  described.   Routines
-       flagged  with  `*'  are ncurses-specific, not described by
+       of  the  manual  page  on which it is described.  Routines
+       flagged with "*" are ncurses-specific,  not  described  by
        XPG4 or present in SVr4.
 
-              <STRONG>curses</STRONG> Routine Name     Manual Page Name
-              --------------------------------------------
-              COLOR_PAIR              <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
-              PAIR_NUMBER             <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              _nc_free_and_exit       <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
-              _nc_freeall             <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
-              _nc_tracebits           <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
-              _traceattr              <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
-              _traceattr2             <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
-              _tracechar              <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
-
-              _tracechtype            <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
-              _tracechtype2           <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
-              _tracedump              <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
-              _tracef                 <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
-              _tracemouse             <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
-              add_wch                 <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
-              add_wchnstr             <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
-              add_wchstr              <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
-              addch                   <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
-              addchnstr               <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
-              addchstr                <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
-              addnstr                 <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
-              addnwstr                <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
-              addstr                  <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
-              addwstr                 <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
-              assume_default_colors   <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>*
-              attr_get                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              attr_off                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              attr_on                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              attr_set                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              attroff                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              attron                  <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              attrset                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              baudrate                <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
-              beep                    <STRONG><A HREF="curs_beep.3x.html">curs_beep(3x)</A></STRONG>
-              bkgd                    <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
-              bkgdset                 <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
-              bkgrnd                  <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
-              bkgrndset               <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
-              border                  <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
-              border_set              <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
-              box                     <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
-              box_set                 <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
-              can_change_color        <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
-              cbreak                  <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              chgat                   <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              clear                   <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
-              clearok                 <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
-              clrtobot                <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
-              clrtoeol                <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
-              color_content           <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
-              color_set               <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              copywin                 <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
-              curs_set                <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-              curses_version          <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
-              def_prog_mode           <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-              def_shell_mode          <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-              define_key              <STRONG><A HREF="define_key.3x.html">define_key(3x)</A></STRONG>*
-              del_curterm             <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              delay_output            <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
-              delch                   <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
-              deleteln                <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
-              delscreen               <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
-              delwin                  <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
-              derwin                  <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
-              doupdate                <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
-              dupwin                  <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
-              echo                    <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              echo_wchar              <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
-              echochar                <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
-              endwin                  <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
-              erase                   <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
-              erasechar               <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
-              erasewchar              <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
-              filter                  <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
-              flash                   <STRONG><A HREF="curs_beep.3x.html">curs_beep(3x)</A></STRONG>
-
-              flushinp                <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
-              get_wch                 <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
-              get_wstr                <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
-              getattrs                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              getbegx                 <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
-              getbegy                 <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
-              getbegyx                <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
-              getbkgd                 <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
-              getbkgrnd               <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
-              getcchar                <STRONG><A HREF="curs_getcchar.3x.html">curs_getcchar(3x)</A></STRONG>
-              getch                   <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
-              getcurx                 <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
-              getcury                 <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
-              getmaxx                 <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
-              getmaxy                 <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
-              getmaxyx                <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
-              getmouse                <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
-              getn_wstr               <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
-              getnstr                 <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
-              getparx                 <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
-              getpary                 <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
-              getparyx                <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
-              getstr                  <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
-              getsyx                  <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-              getwin                  <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
-              getyx                   <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
-              halfdelay               <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              has_colors              <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
-              has_ic                  <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
-              has_il                  <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
-              has_key                 <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>*
-              hline                   <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
-              hline_set               <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
-              idcok                   <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
-              idlok                   <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
-              immedok                 <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
-              in_wch                  <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
-              in_wchnstr              <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
-              in_wchstr               <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
-              inch                    <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
-              inchnstr                <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
-              inchstr                 <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
-              init_color              <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
-              init_pair               <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
-              initscr                 <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
-              innstr                  <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
-              innwstr                 <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
-              ins_nwstr               <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
-              ins_wch                 <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
-              ins_wstr                <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
-              insch                   <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
-              insdelln                <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
-              insertln                <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
-              insnstr                 <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
-              insstr                  <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
-              instr                   <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
-              intrflush               <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              inwstr                  <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
-              is_cleared              <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              is_idcok                <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              is_idlok                <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              is_immedok              <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              is_keypad               <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              is_leaveok              <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              is_linetouched          <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
-              is_nodelay              <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-
-              is_notimeout            <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              is_pad                  <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              is_scrollok             <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              is_subwin               <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              is_syncok               <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              is_term_resized         <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
-              is_wintouched           <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
-              isendwin                <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
-              key_defined             <STRONG><A HREF="key_defined.3x.html">key_defined(3x)</A></STRONG>*
-              key_name                <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
-              keybound                <STRONG><A HREF="keybound.3x.html">keybound(3x)</A></STRONG>*
-              keyname                 <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
-              keyok                   <STRONG><A HREF="keyok.3x.html">keyok(3x)</A></STRONG>*
-              keypad                  <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              killchar                <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
-              killwchar               <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
-              leaveok                 <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
-              longname                <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
-              mcprint                 <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG>*
-              meta                    <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              mouse_trafo             <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
-              mouseinterval           <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
-              mousemask               <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
-              move                    <STRONG><A HREF="curs_move.3x.html">curs_move(3x)</A></STRONG>
-              mvadd_wch               <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
-              mvadd_wchnstr           <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
-              mvadd_wchstr            <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
-              mvaddch                 <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
-              mvaddchnstr             <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
-              mvaddchstr              <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
-              mvaddnstr               <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
-              mvaddnwstr              <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
-              mvaddstr                <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
-              mvaddwstr               <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
-              mvchgat                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              mvcur                   <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              mvdelch                 <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
-              mvderwin                <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
-              mvget_wch               <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
-              mvget_wstr              <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
-              mvgetch                 <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
-              mvgetn_wstr             <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
-              mvgetnstr               <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
-              mvgetstr                <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
-              mvhline                 <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
-              mvhline_set             <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
-              mvin_wch                <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
-              mvin_wchnstr            <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
-              mvin_wchstr             <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
-              mvinch                  <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
-              mvinchnstr              <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
-              mvinchstr               <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
-              mvinnstr                <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
-              mvinnwstr               <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
-              mvins_nwstr             <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
-              mvins_wch               <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
-              mvins_wstr              <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
-              mvinsch                 <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
-              mvinsnstr               <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
-              mvinsstr                <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
-              mvinstr                 <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
-              mvinwstr                <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
-              mvprintw                <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
-              mvscanw                 <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
-              mvvline                 <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
-              mvvline_set             <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
-
-              mvwadd_wch              <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
-              mvwadd_wchnstr          <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
-              mvwadd_wchstr           <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
-              mvwaddch                <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
-              mvwaddchnstr            <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
-              mvwaddchstr             <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
-              mvwaddnstr              <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
-              mvwaddnwstr             <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
-              mvwaddstr               <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
-              mvwaddwstr              <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
-              mvwchgat                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              mvwdelch                <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
-              mvwget_wch              <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
-              mvwget_wstr             <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
-              mvwgetch                <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
-              mvwgetn_wstr            <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
-              mvwgetnstr              <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
-              mvwgetstr               <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
-              mvwhline                <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
-              mvwhline_set            <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
-              mvwin                   <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
-              mvwin_wch               <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
-              mvwin_wchnstr           <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
-              mvwin_wchstr            <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
-              mvwinch                 <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
-              mvwinchnstr             <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
-              mvwinchstr              <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
-              mvwinnstr               <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
-              mvwinnwstr              <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
-              mvwins_nwstr            <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
-              mvwins_wch              <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
-              mvwins_wstr             <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
-              mvwinsch                <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
-              mvwinsnstr              <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
-              mvwinsstr               <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
-              mvwinstr                <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
-              mvwinwstr               <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
-              mvwprintw               <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
-              mvwscanw                <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
-              mvwvline                <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
-              mvwvline_set            <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
-              napms                   <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-              newpad                  <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
-              newterm                 <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
-              newwin                  <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
-              nl                      <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
-              nocbreak                <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              nodelay                 <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              noecho                  <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              nofilter                <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>*
-              nonl                    <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
-              noqiflush               <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              noraw                   <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              notimeout               <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              overlay                 <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
-              overwrite               <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
-              pair_content            <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
-              pechochar               <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
-              pnoutrefresh            <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
-              prefresh                <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
-              printw                  <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
-              putp                    <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              putwin                  <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
-              qiflush                 <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              raw                     <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              redrawwin               <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
-
-              refresh                 <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
-              reset_prog_mode         <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-              reset_shell_mode        <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-              resetty                 <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-              resize_term             <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
-              resizeterm              <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
-              restartterm             <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              ripoffline              <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-              savetty                 <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-              scanw                   <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
-              scr_dump                <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
-              scr_init                <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
-              scr_restore             <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
-              scr_set                 <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
-              scrl                    <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
-              scroll                  <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
-              scrollok                <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
-              set_curterm             <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              set_term                <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
-              setcchar                <STRONG><A HREF="curs_getcchar.3x.html">curs_getcchar(3x)</A></STRONG>
-              setscrreg               <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
-              setsyx                  <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-              setterm                 <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              setupterm               <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              slk_attr                <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>*
-              slk_attr_off            <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_attr_on             <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_attr_set            <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_attroff             <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_attron              <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_attrset             <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_clear               <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_color               <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_init                <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_label               <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_noutrefresh         <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_refresh             <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_restore             <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_set                 <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              slk_touch               <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
-              standend                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              standout                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              start_color             <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
-              subpad                  <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
-              subwin                  <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
-              syncok                  <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
-              term_attrs              <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
-              termattrs               <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
-              termname                <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
-              tgetent                 <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
-              tgetflag                <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
-              tgetnum                 <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
-              tgetstr                 <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
-              tgoto                   <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
-              tigetflag               <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              tigetnum                <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              tigetstr                <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              tiparm                  <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>*
-              timeout                 <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              touchline               <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
-              touchwin                <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
-              tparm                   <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              tputs                   <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
-              tputs                   <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              trace                   <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
-              typeahead               <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-
-              unctrl                  <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
-              unget_wch               <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
-              ungetch                 <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
-              ungetmouse              <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
-              untouchwin              <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
-              use_default_colors      <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>*
-              use_env                 <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
-              use_extended_names      <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
-              use_legacy_coding       <STRONG><A HREF="legacy_coding.3x.html">legacy_coding(3x)</A></STRONG>*
-              use_tioctl              <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
-              vid_attr                <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              vid_puts                <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              vidattr                 <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              vidputs                 <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
-              vline                   <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
-              vline_set               <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
-              vw_printw               <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
-              vw_scanw                <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
-              vwprintw                <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
-              vwscanw                 <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
-              wadd_wch                <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
-              wadd_wchnstr            <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
-              wadd_wchstr             <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
-              waddch                  <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
-              waddchnstr              <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
-              waddchstr               <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
-              waddnstr                <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
-              waddnwstr               <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
-              waddstr                 <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
-              waddwstr                <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
-              wattr_get               <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              wattr_off               <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              wattr_on                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              wattr_set               <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              wattroff                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              wattron                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              wattrset                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              wbkgd                   <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
-              wbkgdset                <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
-              wbkgrnd                 <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
-              wbkgrndset              <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
-              wborder                 <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
-              wborder_set             <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
-              wchgat                  <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              wclear                  <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
-              wclrtobot               <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
-              wclrtoeol               <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
-              wcolor_set              <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              wcursyncup              <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
-              wdelch                  <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
-              wdeleteln               <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
-              wecho_wchar             <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
-              wechochar               <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
-              wenclose                <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
-              werase                  <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
-              wget_wch                <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
-              wget_wstr               <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
-              wgetbkgrnd              <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
-              wgetch                  <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
-              wgetdelay               <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              wgetn_wstr              <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
-              wgetnstr                <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
-              wgetparent              <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              wgetscrreg              <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-              wgetstr                 <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
-              whline                  <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
-
-              whline_set              <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
-              win_wch                 <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
-              win_wchnstr             <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
-              win_wchstr              <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
-              winch                   <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
-              winchnstr               <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
-              winchstr                <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
-              winnstr                 <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
-              winnwstr                <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
-              wins_nwstr              <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
-              wins_wch                <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
-              wins_wstr               <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
-              winsch                  <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
-              winsdelln               <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
-              winsertln               <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
-              winsnstr                <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
-              winsstr                 <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
-              winstr                  <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
-              winwstr                 <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
-              wmouse_trafo            <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
-              wmove                   <STRONG><A HREF="curs_move.3x.html">curs_move(3x)</A></STRONG>
-              wnoutrefresh            <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
-              wprintw                 <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
-              wredrawln               <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
-              wrefresh                <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
-              wresize                 <STRONG><A HREF="wresize.3x.html">wresize(3x)</A></STRONG>*
-              wscanw                  <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
-              wscrl                   <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
-              wsetscrreg              <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
-              wstandend               <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              wstandout               <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
-              wsyncdown               <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
-              wsyncup                 <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
-              wtimeout                <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
-              wtouchln                <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
-              wunctrl                 <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
-              wvline                  <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
-              wvline_set              <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+              <STRONG>curses</STRONG> Routine Name      Manual Page Name
+              ---------------------------------------------
+              COLOR_PAIR               <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+              PAIR_NUMBER              <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              _nc_free_and_exit        <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
+              _nc_freeall              <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
+              _nc_tracebits            <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+              _traceattr               <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+              _traceattr2              <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+              _tracechar               <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+              _tracechtype             <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+              _tracechtype2            <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+              _tracedump               <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+              _tracef                  <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+
+              _tracemouse              <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+              add_wch                  <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+              add_wchnstr              <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+              add_wchstr               <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+              addch                    <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+              addchnstr                <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+              addchstr                 <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+              addnstr                  <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+              addnwstr                 <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+              addstr                   <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+              addwstr                  <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+              alloc_pair               <STRONG><A HREF="new_pair.3x.html">new_pair(3x)</A></STRONG>*
+              assume_default_colors    <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>*
+              attr_get                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              attr_off                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              attr_on                  <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              attr_set                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              attroff                  <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              attron                   <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              attrset                  <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              baudrate                 <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+              beep                     <STRONG><A HREF="curs_beep.3x.html">curs_beep(3x)</A></STRONG>
+              bkgd                     <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
+              bkgdset                  <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
+              bkgrnd                   <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+              bkgrndset                <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+              border                   <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+              border_set               <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+              box                      <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+              box_set                  <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+              can_change_color         <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+              cbreak                   <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              chgat                    <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              clear                    <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+              clearok                  <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+              clrtobot                 <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+              clrtoeol                 <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+              color_content            <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+              color_set                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              copywin                  <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
+              curs_set                 <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+              curses_version           <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
+              def_prog_mode            <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+              def_shell_mode           <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+              define_key               <STRONG><A HREF="define_key.3x.html">define_key(3x)</A></STRONG>*
+              del_curterm              <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              delay_output             <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+              delch                    <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
+              deleteln                 <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+              delscreen                <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+              delwin                   <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+              derwin                   <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+              doupdate                 <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+              dupwin                   <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+              echo                     <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              echo_wchar               <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+              echochar                 <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+              endwin                   <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+              erase                    <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+              erasechar                <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+              erasewchar               <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+              extended_color_content   <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>*
+              extended_pair_content    <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>*
+              extended_slk_color       <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>*
+              filter                   <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+
+              find_pair                <STRONG><A HREF="new_pair.3x.html">new_pair(3x)</A></STRONG>*
+              flash                    <STRONG><A HREF="curs_beep.3x.html">curs_beep(3x)</A></STRONG>
+              flushinp                 <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+              free_pair                <STRONG><A HREF="new_pair.3x.html">new_pair(3x)</A></STRONG>*
+              get_wch                  <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
+              get_wstr                 <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+              getattrs                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              getbegx                  <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+              getbegy                  <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+              getbegyx                 <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
+              getbkgd                  <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
+              getbkgrnd                <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+              getcchar                 <STRONG><A HREF="curs_getcchar.3x.html">curs_getcchar(3x)</A></STRONG>
+              getch                    <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
+              getcurx                  <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+              getcury                  <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+              getmaxx                  <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+              getmaxy                  <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+              getmaxyx                 <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
+              getmouse                 <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+              getn_wstr                <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+              getnstr                  <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+              getparx                  <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+              getpary                  <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
+              getparyx                 <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
+              getstr                   <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+              getsyx                   <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+              getwin                   <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+              getyx                    <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
+              halfdelay                <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              has_colors               <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+              has_ic                   <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+              has_il                   <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+              has_key                  <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>*
+              hline                    <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+              hline_set                <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+              idcok                    <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+              idlok                    <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+              immedok                  <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+              in_wch                   <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
+              in_wchnstr               <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+              in_wchstr                <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+              inch                     <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
+              inchnstr                 <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+              inchstr                  <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+              init_color               <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+              init_extended_color      <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>*
+              init_extended_pair       <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>*
+              init_pair                <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+              initscr                  <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+              innstr                   <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+              innwstr                  <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+              ins_nwstr                <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+              ins_wch                  <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
+              ins_wstr                 <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+              insch                    <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
+              insdelln                 <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+              insertln                 <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+              insnstr                  <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+              insstr                   <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+              instr                    <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+              intrflush                <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              inwstr                   <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+              is_cleared               <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              is_idcok                 <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+
+              is_idlok                 <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              is_immedok               <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              is_keypad                <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              is_leaveok               <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              is_linetouched           <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+              is_nodelay               <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              is_notimeout             <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              is_pad                   <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              is_scrollok              <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              is_subwin                <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              is_syncok                <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              is_term_resized          <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
+              is_wintouched            <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+              isendwin                 <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+              key_defined              <STRONG><A HREF="key_defined.3x.html">key_defined(3x)</A></STRONG>*
+              key_name                 <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+              keybound                 <STRONG><A HREF="keybound.3x.html">keybound(3x)</A></STRONG>*
+              keyname                  <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+              keyok                    <STRONG><A HREF="keyok.3x.html">keyok(3x)</A></STRONG>*
+              keypad                   <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              killchar                 <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+              killwchar                <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+              leaveok                  <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+              longname                 <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+              mcprint                  <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG>*
+              meta                     <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              mouse_trafo              <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+              mouseinterval            <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+              mousemask                <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+              move                     <STRONG><A HREF="curs_move.3x.html">curs_move(3x)</A></STRONG>
+              mvadd_wch                <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+              mvadd_wchnstr            <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+              mvadd_wchstr             <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+              mvaddch                  <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+              mvaddchnstr              <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+              mvaddchstr               <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+              mvaddnstr                <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+              mvaddnwstr               <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+              mvaddstr                 <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+              mvaddwstr                <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+              mvchgat                  <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              mvcur                    <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              mvdelch                  <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
+              mvderwin                 <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+              mvget_wch                <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
+              mvget_wstr               <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+              mvgetch                  <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
+              mvgetn_wstr              <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+              mvgetnstr                <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+              mvgetstr                 <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+              mvhline                  <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+              mvhline_set              <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+              mvin_wch                 <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
+              mvin_wchnstr             <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+              mvin_wchstr              <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+              mvinch                   <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
+              mvinchnstr               <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+              mvinchstr                <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+              mvinnstr                 <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+              mvinnwstr                <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+              mvins_nwstr              <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+              mvins_wch                <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
+              mvins_wstr               <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+              mvinsch                  <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
+              mvinsnstr                <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+
+              mvinsstr                 <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+              mvinstr                  <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+              mvinwstr                 <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+              mvprintw                 <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+              mvscanw                  <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+              mvvline                  <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+              mvvline_set              <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+              mvwadd_wch               <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+              mvwadd_wchnstr           <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+              mvwadd_wchstr            <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+              mvwaddch                 <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+              mvwaddchnstr             <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+              mvwaddchstr              <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+              mvwaddnstr               <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+              mvwaddnwstr              <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+              mvwaddstr                <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+              mvwaddwstr               <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+              mvwchgat                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              mvwdelch                 <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
+              mvwget_wch               <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
+              mvwget_wstr              <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+              mvwgetch                 <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
+              mvwgetn_wstr             <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+              mvwgetnstr               <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+              mvwgetstr                <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+              mvwhline                 <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+              mvwhline_set             <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+              mvwin                    <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+              mvwin_wch                <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
+              mvwin_wchnstr            <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+              mvwin_wchstr             <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+              mvwinch                  <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
+              mvwinchnstr              <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+              mvwinchstr               <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+              mvwinnstr                <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+              mvwinnwstr               <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+              mvwins_nwstr             <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+              mvwins_wch               <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
+              mvwins_wstr              <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+              mvwinsch                 <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
+              mvwinsnstr               <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+              mvwinsstr                <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+              mvwinstr                 <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+              mvwinwstr                <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+              mvwprintw                <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+              mvwscanw                 <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+              mvwvline                 <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+              mvwvline_set             <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+              napms                    <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+              newpad                   <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
+              newterm                  <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+              newwin                   <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+              nl                       <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+              nocbreak                 <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              nodelay                  <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              noecho                   <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              nofilter                 <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>*
+              nonl                     <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+              noqiflush                <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              noraw                    <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              notimeout                <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              overlay                  <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
+              overwrite                <STRONG><A HREF="curs_overlay.3x.html">curs_overlay(3x)</A></STRONG>
+              pair_content             <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+              pechochar                <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
+
+              pnoutrefresh             <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
+              prefresh                 <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
+              printw                   <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+              putp                     <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              putwin                   <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+              qiflush                  <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              raw                      <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              redrawwin                <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+              refresh                  <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+              reset_prog_mode          <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+              reset_shell_mode         <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+              resetty                  <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+              resize_term              <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
+              resizeterm               <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
+              restartterm              <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              ripoffline               <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+              savetty                  <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+              scanw                    <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+              scr_dump                 <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
+              scr_init                 <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
+              scr_restore              <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
+              scr_set                  <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
+              scrl                     <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
+              scroll                   <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
+              scrollok                 <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+              set_curterm              <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              set_term                 <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
+              setcchar                 <STRONG><A HREF="curs_getcchar.3x.html">curs_getcchar(3x)</A></STRONG>
+              setscrreg                <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+              setsyx                   <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
+              setterm                  <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              setupterm                <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              slk_attr                 <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>*
+              slk_attr_off             <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_attr_on              <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_attr_set             <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_attroff              <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_attron               <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_attrset              <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_clear                <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_color                <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_init                 <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_label                <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_noutrefresh          <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_refresh              <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_restore              <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_set                  <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              slk_touch                <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG>
+              standend                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              standout                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              start_color              <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
+              subpad                   <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
+              subwin                   <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+              syncok                   <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+              term_attrs               <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+              termattrs                <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+              termname                 <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
+              tgetent                  <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+              tgetflag                 <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+              tgetnum                  <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+              tgetstr                  <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+              tgoto                    <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+              tigetflag                <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              tigetnum                 <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              tigetstr                 <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+
+              timeout                  <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              tiparm                   <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>*
+              touchline                <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+              touchwin                 <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+              tparm                    <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              tputs                    <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
+              tputs                    <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              trace                    <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+              typeahead                <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              unctrl                   <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+              unget_wch                <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
+              ungetch                  <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
+              ungetmouse               <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+              untouchwin               <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+              use_default_colors       <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>*
+              use_env                  <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+              use_extended_names       <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
+              use_legacy_coding        <STRONG><A HREF="legacy_coding.3x.html">legacy_coding(3x)</A></STRONG>*
+              use_tioctl               <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+              vid_attr                 <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              vid_puts                 <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              vidattr                  <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              vidputs                  <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+              vline                    <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+              vline_set                <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+              vw_printw                <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+              vw_scanw                 <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+              vwprintw                 <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+              vwscanw                  <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+              wadd_wch                 <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+              wadd_wchnstr             <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+              wadd_wchstr              <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
+              waddch                   <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+              waddchnstr               <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+              waddchstr                <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
+              waddnstr                 <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+              waddnwstr                <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+              waddstr                  <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
+              waddwstr                 <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
+              wattr_get                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              wattr_off                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              wattr_on                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              wattr_set                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              wattroff                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              wattron                  <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              wattrset                 <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              wbkgd                    <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
+              wbkgdset                 <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
+              wbkgrnd                  <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+              wbkgrndset               <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+              wborder                  <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+              wborder_set              <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+              wchgat                   <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              wclear                   <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+              wclrtobot                <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+              wclrtoeol                <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+              wcolor_set               <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              wcursyncup               <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+              wdelch                   <STRONG><A HREF="curs_delch.3x.html">curs_delch(3x)</A></STRONG>
+              wdeleteln                <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+              wecho_wchar              <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
+              wechochar                <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+              wenclose                 <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+              werase                   <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+              wget_wch                 <STRONG><A HREF="curs_get_wch.3x.html">curs_get_wch(3x)</A></STRONG>
+
+              wget_wstr                <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+              wgetbkgrnd               <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
+              wgetch                   <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
+              wgetdelay                <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              wgetn_wstr               <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+              wgetnstr                 <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+              wgetparent               <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              wgetscrreg               <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+              wgetstr                  <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+              whline                   <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+              whline_set               <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
+              win_wch                  <STRONG><A HREF="curs_in_wch.3x.html">curs_in_wch(3x)</A></STRONG>
+              win_wchnstr              <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+              win_wchstr               <STRONG><A HREF="curs_in_wchstr.3x.html">curs_in_wchstr(3x)</A></STRONG>
+              winch                    <STRONG><A HREF="curs_inch.3x.html">curs_inch(3x)</A></STRONG>
+              winchnstr                <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+              winchstr                 <STRONG><A HREF="curs_inchstr.3x.html">curs_inchstr(3x)</A></STRONG>
+              winnstr                  <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+              winnwstr                 <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+              wins_nwstr               <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+              wins_wch                 <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
+              wins_wstr                <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
+              winsch                   <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
+              winsdelln                <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+              winsertln                <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
+              winsnstr                 <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+              winsstr                  <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+              winstr                   <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
+              winwstr                  <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+              wmouse_trafo             <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG>*
+              wmove                    <STRONG><A HREF="curs_move.3x.html">curs_move(3x)</A></STRONG>
+              wnoutrefresh             <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+              wprintw                  <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+              wredrawln                <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+              wrefresh                 <STRONG><A HREF="curs_refresh.3x.html">curs_refresh(3x)</A></STRONG>
+              wresize                  <STRONG><A HREF="wresize.3x.html">wresize(3x)</A></STRONG>*
+              wscanw                   <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
+              wscrl                    <STRONG><A HREF="curs_scroll.3x.html">curs_scroll(3x)</A></STRONG>
+              wsetscrreg               <STRONG><A HREF="curs_outopts.3x.html">curs_outopts(3x)</A></STRONG>
+              wstandend                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              wstandout                <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+              wsyncdown                <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+              wsyncup                  <STRONG><A HREF="curs_window.3x.html">curs_window(3x)</A></STRONG>
+              wtimeout                 <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
+              wtouchln                 <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+              wunctrl                  <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
+              wvline                   <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
+              wvline_set               <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
 
 
 </PRE><H2><a name="h2-RETURN-VALUE">RETURN VALUE</a></H2><PRE>
-       Routines that return an integer return  <STRONG>ERR</STRONG>  upon  failure
-       and  an  integer value other than <STRONG>ERR</STRONG> upon successful com-
-       pletion, unless otherwise noted in  the  routine  descrip-
+       Routines  that  return  an integer return <STRONG>ERR</STRONG> upon failure
+       and an integer value other than <STRONG>ERR</STRONG> upon  successful  com-
+       pletion,  unless  otherwise  noted in the routine descrip-
        tions.
 
        As a general rule, routines check for null pointers passed
        as parameters, and handle this as an error.
 
-       All macros return the  value  of  the  <STRONG>w</STRONG>  version,  except
+       All  macros  return  the  value  of  the <STRONG>w</STRONG> version, except
        <STRONG>setscrreg</STRONG>, <STRONG>wsetscrreg</STRONG>, <STRONG>getyx</STRONG>, <STRONG>getbegyx</STRONG>, and <STRONG>getmaxyx</STRONG>.  The
-       return values of <STRONG>setscrreg</STRONG>, <STRONG>wsetscrreg</STRONG>,  <STRONG>getyx</STRONG>,  <STRONG>getbegyx</STRONG>,
+       return  values  of <STRONG>setscrreg</STRONG>, <STRONG>wsetscrreg</STRONG>, <STRONG>getyx</STRONG>, <STRONG>getbegyx</STRONG>,
        and <STRONG>getmaxyx</STRONG> are undefined (i.e., these should not be used
        as the right-hand side of assignment statements).
 
        important ones have been already discussed in detail.
 
    <STRONG>CC</STRONG>
-       When set,  change  occurrences  of  the  command_character
+       When  set,  change  occurrences  of  the command_character
        (i.e.,  the  <STRONG>cmdch</STRONG>  capability)  of  the  loaded  terminfo
-       entries to the value of this variable.  Very few  terminfo
+       entries  to the value of this variable.  Very few terminfo
        entries provide this feature.
 
        Because this name is also used in development environments
-       to represent the C compiler's name, <STRONG>ncurses</STRONG> ignores it  if
+       to  represent the C compiler's name, <STRONG>ncurses</STRONG> ignores it if
        it does not happen to be a single character.
 
 
 </PRE><H3><a name="h3-BAUDRATE">BAUDRATE</a></H3><PRE>
-       The  debugging  library  checks  this environment variable
+       The debugging library  checks  this  environment  variable
        when the application has redirected output to a file.  The
-       variable's  numeric value is used for the baudrate.  If no
+       variable's numeric value is used for the baudrate.  If  no
        value is found, <STRONG>ncurses</STRONG> uses 9600.  This allows testers to
-       construct  repeatable  test-cases  that  take into account
+       construct repeatable test-cases  that  take  into  account
        costs that depend on baudrate.
 
 
 </PRE><H3><a name="h3-COLUMNS">COLUMNS</a></H3><PRE>
-       Specify the width of the screen in  characters.   Applica-
-       tions  running in a windowing environment usually are able
-       to obtain the width of the window in which they  are  exe-
-       cuting.   If  neither the <STRONG>COLUMNS</STRONG> value nor the terminal's
-       screen size is available, <STRONG>ncurses</STRONG> uses the size which  may
-       be  specified  in  the  terminfo  database (i.e., the <STRONG>cols</STRONG>
+       Specify  the  width of the screen in characters.  Applica-
+       tions running in a windowing environment usually are  able
+       to  obtain  the width of the window in which they are exe-
+       cuting.  If neither the <STRONG>COLUMNS</STRONG> value nor  the  terminal's
+       screen  size is available, <STRONG>ncurses</STRONG> uses the size which may
+       be specified in the  terminfo  database  (i.e.,  the  <STRONG>cols</STRONG>
        capability).
 
-       It is important that your application use a  correct  size
-       for  the screen.  This is not always possible because your
-       application may be running on a host which does not  honor
-       NAWS  (Negotiations About Window Size), or because you are
-       temporarily running as  another  user.   However,  setting
-       <STRONG>COLUMNS</STRONG>  and/or  <STRONG>LINES</STRONG>  overrides the library's use of the
+       It  is  important that your application use a correct size
+       for the screen.  This is not always possible because  your
+       application  may be running on a host which does not honor
+       NAWS (Negotiations About Window Size), or because you  are
+       temporarily  running  as  another  user.  However, setting
+       <STRONG>COLUMNS</STRONG> and/or <STRONG>LINES</STRONG> overrides the library's  use  of  the
        screen size obtained from the operating system.
 
-       Either <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> symbols may be specified  indepen-
-       dently.   This  is mainly useful to circumvent legacy mis-
-       features of terminal descriptions, e.g., xterm which  com-
+       Either  <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> symbols may be specified indepen-
+       dently.  This is mainly useful to circumvent  legacy  mis-
+       features  of terminal descriptions, e.g., xterm which com-
        monly specifies a 65 line screen.  For best results, <STRONG>lines</STRONG>
        and <STRONG>cols</STRONG> should not be specified in a terminal description
        for terminals which are run as emulations.
 
-       Use  the  <STRONG>use_env</STRONG>  function to disable all use of external
-       environment (but not including system calls) to  determine
-       the  screen  size.   Use the <STRONG>use_tioctl</STRONG> function to update
-       <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> to match the screen  size  obtained  from
+       Use the <STRONG>use_env</STRONG> function to disable all  use  of  external
+       environment  (but not including system calls) to determine
+       the screen size.  Use the <STRONG>use_tioctl</STRONG>  function  to  update
+       <STRONG>COLUMNS</STRONG>  or  <STRONG>LINES</STRONG>  to match the screen size obtained from
        system calls or the terminal database.
 
 
 </PRE><H3><a name="h3-ESCDELAY">ESCDELAY</a></H3><PRE>
-       Specifies  the  total  time,  in  milliseconds,  for which
-       ncurses will await a character sequence, e.g., a  function
-       key.   The default value, 1000 milliseconds, is enough for
-       most uses.  However, it is made a variable to  accommodate
+       Specifies the  total  time,  in  milliseconds,  for  which
+       ncurses  will await a character sequence, e.g., a function
+       key.  The default value, 1000 milliseconds, is enough  for
+       most  uses.  However, it is made a variable to accommodate
        unusual applications.
 
        The most common instance where you may wish to change this
-       value is to work with slow hosts, e.g., running on a  net-
-       work.   If the host cannot read characters rapidly enough,
-       it will have the same effect as if the  terminal  did  not
-       send  characters  rapidly  enough.  The library will still
+       value  is to work with slow hosts, e.g., running on a net-
+       work.  If the host cannot read characters rapidly  enough,
+       it  will  have  the same effect as if the terminal did not
+       send characters rapidly enough.  The  library  will  still
        see a timeout.
 
-       Note that xterm mouse events are built up  from  character
-       sequences  received  from  the xterm.  If your application
-       makes heavy use of  multiple-clicking,  you  may  wish  to
+       Note  that  xterm mouse events are built up from character
+       sequences received from the xterm.   If  your  application
+       makes  heavy  use  of  multiple-clicking,  you may wish to
        lengthen this default value because the timeout applies to
-       the composed multi-click event as well as  the  individual
+       the  composed  multi-click event as well as the individual
        clicks.
 
-       In  addition to the environment variable, this implementa-
-       tion provides a global variable with the same name.   Por-
-       table  applications  should  not rely upon the presence of
+       In addition to the environment variable, this  implementa-
+       tion  provides a global variable with the same name.  Por-
+       table applications should not rely upon  the  presence  of
        ESCDELAY in either form, but setting the environment vari-
        able rather than the global variable does not create prob-
        lems when compiling an application.
 
 
 </PRE><H3><a name="h3-LINES">LINES</a></H3><PRE>
-       Like  COLUMNS, specify the height of the screen in charac-
+       Like COLUMNS, specify the height of the screen in  charac-
        ters.  See COLUMNS for a detailed description.
 
 
 </PRE><H3><a name="h3-MOUSE_BUTTONS_123">MOUSE_BUTTONS_123</a></H3><PRE>
-       This applies only to the OS/2 EMX port.  It specifies  the
-       order  of  buttons  on the mouse.  OS/2 numbers a 3-button
+       This  applies only to the OS/2 EMX port.  It specifies the
+       order of buttons on the mouse.  OS/2  numbers  a  3-button
        mouse inconsistently from other platforms:
 
        1 = left
        2 = right
        3 = middle.
 
-       This variable lets you customize the mouse.  The  variable
-       must  be  three numeric digits 1-3 in any order, e.g., 123
+       This  variable lets you customize the mouse.  The variable
+       must be three numeric digits 1-3 in any order,  e.g.,  123
        or 321.  If it is not specified, <STRONG>ncurses</STRONG> uses 132.
 
 
 </PRE><H3><a name="h3-NCURSES_ASSUMED_COLORS">NCURSES_ASSUMED_COLORS</a></H3><PRE>
-       Override the compiled-in assumption  that  the  terminal's
-       default   colors   are  white-on-black  (see  <STRONG>default_col-</STRONG>
+       Override  the  compiled-in  assumption that the terminal's
+       default  colors  are  white-on-black   (see   <STRONG>default_col-</STRONG>
        <STRONG><A HREF="default_colors.3x.html">ors(3x)</A></STRONG>).  You may set the foreground and background color
-       values  with this environment variable by proving a 2-ele-
-       ment list: foreground,background.  For  example,  to  tell
-       ncurses  to not assume anything about the colors, set this
-       to "-1,-1".  To make it green-on-black, set it  to  "2,0".
-       Any  positive  value  from zero to the terminfo <STRONG>max_colors</STRONG>
+       values with this environment variable by proving a  2-ele-
+       ment  list:  foreground,background.   For example, to tell
+       ncurses to not assume anything about the colors, set  this
+       to  "-1,-1".   To make it green-on-black, set it to "2,0".
+       Any positive value from zero to  the  terminfo  <STRONG>max_colors</STRONG>
        value is allowed.
 
 
 </PRE><H3><a name="h3-NCURSES_CONSOLE2">NCURSES_CONSOLE2</a></H3><PRE>
        This applies only to the MinGW port of ncurses.
 
-       The <STRONG>Console2</STRONG> program's handling of the  Microsoft  Console
+       The  <STRONG>Console2</STRONG>  program's handling of the Microsoft Console
        API call <STRONG>CreateConsoleScreenBuffer</STRONG> is defective.  Applica-
-       tions which use this will hang.  However, it  is  possible
-       to  simulate  the  action  of this call by mapping coordi-
+       tions  which  use this will hang.  However, it is possible
+       to simulate the action of this  call  by  mapping  coordi-
        nates, explicitly saving and restoring the original screen
-       contents.   Setting the environment variable <STRONG>NCGDB</STRONG> has the
+       contents.  Setting the environment variable <STRONG>NCGDB</STRONG> has  the
        same effect.
 
 
 </PRE><H3><a name="h3-NCURSES_GPM_TERMS">NCURSES_GPM_TERMS</a></H3><PRE>
-       This applies only to ncurses configured  to  use  the  GPM
+       This  applies  only  to  ncurses configured to use the GPM
        interface.
 
-       If  present,  the environment variable is a list of one or
-       more terminal names against  which  the  TERM  environment
-       variable  is  matched.   Setting it to an empty value dis-
-       ables the GPM interface; using the  built-in  support  for
+       If present, the environment variable is a list of  one  or
+       more  terminal  names  against  which the <STRONG>TERM</STRONG> environment
+       variable is matched.  Setting it to an  empty  value  dis-
+       ables  the  GPM  interface; using the built-in support for
        xterm, etc.
 
        If  the  environment  variable  is  absent,  ncurses  will
-       attempt to open GPM if TERM contains "linux".
+       attempt to open GPM if <STRONG>TERM</STRONG> contains "linux".
 
 
 </PRE><H3><a name="h3-NCURSES_NO_HARD_TABS">NCURSES_NO_HARD_TABS</a></H3><PRE>
-       <STRONG>Ncurses</STRONG> may use tabs as part of the cursor movement  opti-
-       mization.   In  some  cases,  your terminal driver may not
-       handle these properly.  Set this environment  variable  to
-       disable  the  feature.  You can also adjust your <STRONG>stty</STRONG> set-
-       tings to avoid the problem.  NCURSES_NO_MAGIC_COOKIE  Some
-       terminals  use  a magic-cookie feature which requires spe-
-       cial  handling  to  make  highlighting  and  other   video
-       attributes  display  properly.  You can suppress the high-
-       lighting entirely for  these  terminals  by  setting  this
+       <STRONG>Ncurses</STRONG>  may use tabs as part of the cursor movement opti-
+       mization.  In some cases, your  terminal  driver  may  not
+       handle  these  properly.  Set this environment variable to
+       disable the feature.  You can also adjust your  <STRONG>stty</STRONG>  set-
+       tings  to avoid the problem.  NCURSES_NO_MAGIC_COOKIE Some
+       terminals use a magic-cookie feature which  requires  spe-
+       cial   handling  to  make  highlighting  and  other  video
+       attributes display properly.  You can suppress  the  high-
+       lighting  entirely  for  these  terminals  by setting this
        environment variable.
 
 
 </PRE><H3><a name="h3-NCURSES_NO_PADDING">NCURSES_NO_PADDING</a></H3><PRE>
        Most of the terminal descriptions in the terminfo database
-       are written for real "hardware"  terminals.   Many  people
-       use  terminal  emulators which run in a windowing environ-
-       ment and use curses-based applications.   Terminal  emula-
+       are  written  for  real "hardware" terminals.  Many people
+       use terminal emulators which run in a  windowing  environ-
+       ment  and  use curses-based applications.  Terminal emula-
        tors can duplicate all of the important aspects of a hard-
-       ware terminal, but they do not have the same  limitations.
-       The  chief  limitation  of  a  hardware  terminal from the
+       ware  terminal, but they do not have the same limitations.
+       The chief limitation  of  a  hardware  terminal  from  the
        standpoint  of  your  application  is  the  management  of
-       dataflow,  i.e.,  timing.   Unless  a hardware terminal is
-       interfaced into a terminal concentrator (which  does  flow
-       control),  it  (or your application) must manage dataflow,
-       preventing overruns.  The cheapest solution  (no  hardware
-       cost)  is  for  your  program  to do this by pausing after
+       dataflow, i.e., timing.  Unless  a  hardware  terminal  is
+       interfaced  into  a terminal concentrator (which does flow
+       control), it (or your application) must  manage  dataflow,
+       preventing  overruns.   The cheapest solution (no hardware
+       cost) is for your program to  do  this  by  pausing  after
        operations that the terminal does slowly, such as clearing
        the display.
 
-       As  a  result,  many  terminal descriptions (including the
-       vt100) have delay times embedded.  You  may  wish  to  use
-       these  descriptions,  but  not want to pay the performance
+       As a result, many  terminal  descriptions  (including  the
+       vt100)  have  delay  times  embedded.  You may wish to use
+       these descriptions, but not want to  pay  the  performance
        penalty.
 
        Set the NCURSES_NO_PADDING environment variable to disable
 
           <STRONG>o</STRONG>   continued though 5.9 patch 20130126
 
-       <STRONG>ncurses</STRONG> enabled buffered output during  terminal  initial-
-       ization.   This  was  done (as in SVr4 curses) for perfor-
-       mance reasons.  For testing purposes, both of <STRONG>ncurses</STRONG>  and
-       certain  applications,  this  feature  was  made optional.
-       Setting the  NCURSES_NO_SETBUF  variable  disabled  output
-       buffering,  leaving  the  output  in the original (usually
+       <STRONG>ncurses</STRONG>  enabled  buffered output during terminal initial-
+       ization.  This was done (as in SVr4  curses)  for  perfor-
+       mance  reasons.  For testing purposes, both of <STRONG>ncurses</STRONG> and
+       certain applications,  this  feature  was  made  optional.
+       Setting  the  NCURSES_NO_SETBUF  variable  disabled output
+       buffering, leaving the output  in  the  original  (usually
        line buffered) mode.
 
-       In the current implementation, ncurses  performs  its  own
-       buffering  and  does not require this workaround.  It does
+       In  the  current  implementation, ncurses performs its own
+       buffering and does not require this workaround.   It  does
        not modify the buffering of the standard output.
 
-       The reason for the change was to  make  the  behavior  for
+       The  reason  for  the  change was to make the behavior for
        interrupts and other signals more robust.  One drawback is
-       that certain nonconventional programs would  mix  ordinary
-       stdio  calls  with ncurses calls and (usually) work.  This
-       is no longer possible  since  ncurses  is  not  using  the
-       buffered  standard  output but its own output (to the same
-       file descriptor).  As a special case, the low-level  calls
-       such  as  <STRONG>putp</STRONG>  still  use the standard output.  But high-
+       that  certain  nonconventional programs would mix ordinary
+       stdio calls with ncurses calls and (usually)  work.   This
+       is  no  longer  possible  since  ncurses  is not using the
+       buffered standard output but its own output (to  the  same
+       file  descriptor).  As a special case, the low-level calls
+       such as <STRONG>putp</STRONG> still use the  standard  output.   But  high-
        level curses calls do not.
 
 
 </PRE><H3><a name="h3-NCURSES_NO_UTF8_ACS">NCURSES_NO_UTF8_ACS</a></H3><PRE>
        During initialization, the <STRONG>ncurses</STRONG> library checks for spe-
        cial cases where VT100 line-drawing (and the corresponding
-       alternate character set  capabilities)  described  in  the
+       alternate  character  set  capabilities)  described in the
        terminfo are known to be missing.  Specifically, when run-
        ning in a UTF-8 locale, the Linux console emulator and the
-       GNU  screen program ignore these.  Ncurses checks the TERM
-       environment variable for these.  For other special  cases,
-       you  should  set  this  environment  variable.  Doing this
-       tells ncurses to use Unicode values  which  correspond  to
+       GNU screen program ignore these.  Ncurses checks the  <STRONG>TERM</STRONG>
+       environment  variable for these.  For other special cases,
+       you should set  this  environment  variable.   Doing  this
+       tells  ncurses  to  use Unicode values which correspond to
        the VT100 line-drawing glyphs.  That works for the special
        cases cited, and is likely to work for terminal emulators.
 
        When setting this variable, you should set it to a nonzero
-       value.   Setting  it  to zero (or to a nonnumber) disables
+       value.  Setting it to zero (or to  a  nonnumber)  disables
        the special check for "linux" and "screen".
 
-       As an alternative to  the  environment  variable,  ncurses
-       checks  for an extended terminfo capability <STRONG>U8</STRONG>.  This is a
-       numeric capability which can  be  compiled  using  <STRONG>tic</STRONG> <STRONG>-x</STRONG>.
+       As  an  alternative  to  the environment variable, ncurses
+       checks for an extended terminfo capability <STRONG>U8</STRONG>.  This is  a
+       numeric  capability  which  can  be compiled using <STRONG>tic</STRONG> <STRONG>-x</STRONG>.
        For example
 
           # linux console, if patched to provide working
                   U8#1, use=xterm,
 
        The name "U8" is chosen to be two characters, to permit it
-       to be used  by  applications  that  use  ncurses'  termcap
+       to  be  used  by  applications  that  use ncurses' termcap
        interface.
 
 
 </PRE><H3><a name="h3-NCURSES_TRACE">NCURSES_TRACE</a></H3><PRE>
-       During   initialization,  the  <STRONG>ncurses</STRONG>  debugging  library
-       checks the NCURSES_TRACE environment variable.  If  it  is
+       During  initialization,  the  <STRONG>ncurses</STRONG>  debugging   library
+       checks  the  NCURSES_TRACE environment variable.  If it is
        defined, to a numeric value, <STRONG>ncurses</STRONG> calls the <STRONG>trace</STRONG> func-
        tion, using that value as the argument.
 
-       The argument values, which are defined in  <STRONG>curses.h</STRONG>,  pro-
-       vide  several  types  of  information.   When running with
+       The  argument  values, which are defined in <STRONG>curses.h</STRONG>, pro-
+       vide several types  of  information.   When  running  with
        traces enabled, your application will write the file <STRONG>trace</STRONG>
        to the current directory.
 
 
 
 </PRE><H3><a name="h3-TERM">TERM</a></H3><PRE>
-       Denotes  your  terminal  type.  Each terminal type is dis-
+       Denotes your terminal type.  Each terminal  type  is  dis-
        tinct, though many are similar.
 
-       <STRONG>TERM</STRONG> is commonly set by terminal emulators to help  appli-
-       cations  find  a  workable  terminal description.  Some of
-       those  choose  a  popular  approximation,  e.g.,   "ansi",
-       "vt100",  "xterm"  rather  than  an exact fit.  Not infre-
-       quently, your application will  have  problems  with  that
+       <STRONG>TERM</STRONG>  is commonly set by terminal emulators to help appli-
+       cations find a workable  terminal  description.   Some  of
+       those   choose  a  popular  approximation,  e.g.,  "ansi",
+       "vt100", "xterm" rather than an  exact  fit.   Not  infre-
+       quently,  your  application  will  have problems with that
        approach, e.g., incorrect function-key definitions.
 
-       If  you  set <STRONG>TERM</STRONG> in your environment, it has no effect on
-       the operation of the terminal emulator.  It  only  affects
-       the  way applications work within the terminal.  Likewise,
+       If you set <STRONG>TERM</STRONG> in your environment, it has no  effect  on
+       the  operation  of the terminal emulator.  It only affects
+       the way applications work within the terminal.   Likewise,
        as a general rule (<STRONG>xterm</STRONG> being a rare exception), terminal
-       emulators  which  allow you to specify <STRONG>TERM</STRONG> as a parameter
-       or configuration value do not  change  their  behavior  to
+       emulators which allow you to specify <STRONG>TERM</STRONG> as  a  parameter
+       or  configuration  value  do  not change their behavior to
        match that setting.
 
 
 </PRE><H3><a name="h3-TERMCAP">TERMCAP</a></H3><PRE>
-       If  the  <STRONG>ncurses</STRONG>  library has been configured with <EM>termcap</EM>
-       support, <STRONG>ncurses</STRONG> will check for a  terminal's  description
-       in  termcap  form  if  it is not available in the terminfo
+       If the <STRONG>ncurses</STRONG> library has been  configured  with  <EM>termcap</EM>
+       support,  <STRONG>ncurses</STRONG>  will check for a terminal's description
+       in termcap form if it is not  available  in  the  terminfo
        database.
 
-       The TERMCAP environment variable contains either a  termi-
-       nal  description  (with  newlines stripped out), or a file
-       name telling where the information  denoted  by  the  TERM
-       environment  variable  exists.  In either case, setting it
-       directs <STRONG>ncurses</STRONG> to ignore the usual place for this  infor-
+       The  <STRONG>TERMCAP</STRONG> environment variable contains either a termi-
+       nal description (with newlines stripped out),  or  a  file
+       name  telling  where  the  information denoted by the <STRONG>TERM</STRONG>
+       environment variable exists.  In either case,  setting  it
+       directs  <STRONG>ncurses</STRONG> to ignore the usual place for this infor-
        mation, e.g., /etc/termcap.
 
 
 </PRE><H3><a name="h3-TERMINFO">TERMINFO</a></H3><PRE>
-       Overrides the directory in which <STRONG>ncurses</STRONG> searches for your
-       terminal description.  This is the simplest, but  not  the
-       only  way to change the list of directories.  The complete
-       list of directories in order follows:
+       <STRONG>ncurses</STRONG> can be configured to read from  multiple  terminal
+       databases.   The  <STRONG>TERMINFO</STRONG> variable overrides the location
+       for the default terminal database.  Terminal  descriptions
+       (in terminal format) are stored in terminal databases:
+
+       <STRONG>o</STRONG>   Normally  these  are stored in a directory tree, using
+           subdirectories named by the first letter of the termi-
+           nal names therein.
+
+           This is the scheme used in System V, which legacy Unix
+           systems use, and the  <STRONG>TERMINFO</STRONG>  variable  is  used  by
+           <EM>curses</EM>  applications  on those systems to override the
+           default location of the terminal database.
+
+       <STRONG>o</STRONG>   If <STRONG>ncurses</STRONG> is built to use hashed databases, then each
+           entry  in  this list may be the path of a hashed data-
+           base file, e.g.,
+
+             /usr/share/terminfo.db
+
+           rather than
+
+             /usr/share/terminfo/
 
-          <STRONG>o</STRONG>   the last directory to which <STRONG>ncurses</STRONG> wrote, if  any,
-              is searched first
+           The hashed database uses less disk-space and is a lit-
+           tle  faster  than  the  directory tree.  However, some
+           applications assume the  existence  of  the  directory
+           tree,  reading  it directly rather than using the ter-
+           minfo library calls.
 
-          <STRONG>o</STRONG>   the directory specified by the TERMINFO environment
+       <STRONG>o</STRONG>   If <STRONG>ncurses</STRONG> is built with a support for reading termcap
+           files  directly, then an entry in this list may be the
+           path of a termcap file.
+
+       <STRONG>o</STRONG>   If the <STRONG>TERMINFO</STRONG> variable begins with "hex:" or "b64:",
+           <STRONG>ncurses</STRONG>  uses the remainder of that variable as a com-
+           piled terminal description.   You  might  produce  the
+           base64 format using <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>:
+
+             TERMINFO="$(infocmp -0 -Q2 -q)"
+             export TERMINFO
+
+           The  compiled description is used if it corresponds to
+           the terminal identified by the <STRONG>TERM</STRONG> variable.
+
+       Setting <STRONG>TERMINFO</STRONG> is the simplest, but not the only way  to
+       set  location  of the default terminal database.  The com-
+       plete list of database locations in order follows:
+
+          <STRONG>o</STRONG>   the last terminal database to which <STRONG>ncurses</STRONG>  wrote,
+              if any, is searched first
+
+          <STRONG>o</STRONG>   the  location specified by the TERMINFO environment
               variable
 
           <STRONG>o</STRONG>   $HOME/.terminfo
 
-          <STRONG>o</STRONG>   directories listed in the TERMINFO_DIRS environment
+          <STRONG>o</STRONG>   locations listed in the  TERMINFO_DIRS  environment
               variable
 
-          <STRONG>o</STRONG>   one  or more directories whose names are configured
+          <STRONG>o</STRONG>   one  or  more  locations whose names are configured
               and compiled into the ncurses library, i.e.,
 
              <STRONG>o</STRONG>   /usr/local/ncurses/share/ter-
 
 
 </PRE><H3><a name="h3-TERMINFO_DIRS">TERMINFO_DIRS</a></H3><PRE>
-       Specifies  a  list  of  directories to search for terminal
-       descriptions.  The list is separated by colons (i.e., ":")
-       on Unix, semicolons on OS/2 EMX.
-
-       All  of  the  terminal  descriptions are in terminfo form.
-       Normally these are stored in a directory tree, using  sub-
-       directories  named  by  the  first  letter of the terminal
-       names therein.
-
-       If <STRONG>ncurses</STRONG> is built with  a  hashed  database,  then  each
-       entry in this list can also be the path of the correspond-
-       ing database file.
+       Specifies  a  list  of  locations  to  search for terminal
+       descriptions.  Each location in the  list  is  a  terminal
+       database as described in the section on the <STRONG>TERMINFO</STRONG> vari-
+       able.  The list is separated  by  colons  (i.e.,  ":")  on
+       Unix, semicolons on OS/2 EMX.
 
-       If <STRONG>ncurses</STRONG> is built with a  support  for  reading  termcap
-       files directly, then an entry in this list may be the path
-       of a termcap file.
+       There is no corresponding feature in System V terminfo; it
+       is an extension developed for <STRONG>ncurses</STRONG>.
 
 
 </PRE><H3><a name="h3-TERMPATH">TERMPATH</a></H3><PRE>
-       If TERMCAP does not hold a file name then  <STRONG>ncurses</STRONG>  checks
-       the  TERMPATH  environment  variable.   This  is a list of
+       If <STRONG>TERMCAP</STRONG> does not hold a file name then  <STRONG>ncurses</STRONG>  checks
+       the  <STRONG>TERMPATH</STRONG>  environment  variable.   This  is a list of
        filenames separated by spaces or  colons  (i.e.,  ":")  on
        Unix, semicolons on OS/2 EMX.
 
-       If  the  TERMPATH environment variable is not set, <STRONG>ncurses</STRONG>
-       looks in the files  /etc/termcap,  /usr/share/misc/termcap
-       and $HOME/.termcap, in that order.
+       If  the  <STRONG>TERMPATH</STRONG> environment variable is not set, <STRONG>ncurses</STRONG>
+       looks in the files
+
+         /etc/termcap, /usr/share/misc/termcap and $HOME/.termcap,
+
+       in that order.
 
-       The  library  may be configured to disregard the following
-       variables when the current user is the  superuser  (root),
+       The library may be configured to disregard  the  following
+       variables  when  the current user is the superuser (root),
        or if the application uses setuid or setgid permissions:
 
-       $TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as $HOME.
+         $TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as $HOME.
 
 
 </PRE><H2><a name="h2-ALTERNATE-CONFIGURATIONS">ALTERNATE CONFIGURATIONS</a></H2><PRE>
-       Several  different  configurations are possible, depending
-       on  the  configure  script  options  used  when   building
-       <STRONG>ncurses</STRONG>.   There  are a few main options whose effects are
+       Several different configurations are  possible,  depending
+       on   the  configure  script  options  used  when  building
+       <STRONG>ncurses</STRONG>.  There are a few main options whose  effects  are
        visible to the applications developer using <STRONG>ncurses</STRONG>:
 
        --disable-overwrite
-            The standard include for <STRONG>ncurses</STRONG> is as noted in  <STRONG>SYN-</STRONG>
+            The  standard include for <STRONG>ncurses</STRONG> is as noted in <STRONG>SYN-</STRONG>
             <STRONG>OPSIS</STRONG>:
 
           <STRONG>#include</STRONG> <STRONG>&lt;curses.h&gt;</STRONG>
 
-            This  option is used to avoid filename conflicts when
-            <STRONG>ncurses</STRONG> is not the main implementation of  curses  of
-            the  computer.   If  <STRONG>ncurses</STRONG>  is  installed disabling
-            overwrite, it puts its  headers  in  a  subdirectory,
+            This option is used to avoid filename conflicts  when
+            <STRONG>ncurses</STRONG>  is  not the main implementation of curses of
+            the computer.   If  <STRONG>ncurses</STRONG>  is  installed  disabling
+            overwrite,  it  puts  its  headers in a subdirectory,
             e.g.,
 
           <STRONG>#include</STRONG> <STRONG>&lt;ncurses/curses.h&gt;</STRONG>
 
-            It  also  omits a symbolic link which would allow you
+            It also omits a symbolic link which would  allow  you
             to use <STRONG>-lcurses</STRONG> to build executables.
 
        --enable-widec
-            The configure script renames the library and (if  the
-            <STRONG>--disable-overwrite</STRONG>  option  is used) puts the header
+            The  configure script renames the library and (if the
+            <STRONG>--disable-overwrite</STRONG> option is used) puts  the  header
             files  in  a  different  subdirectory.   All  of  the
-            library  names  have  a  "w"  appended to them, i.e.,
+            library names have a  "w"  appended  to  them,  i.e.,
             instead of
 
           <STRONG>-lncurses</STRONG>
           <STRONG>-lncursesw</STRONG>
 
             You must also define <STRONG>_XOPEN_SOURCE_EXTENDED</STRONG> when com-
-            piling  for  the  wide-character  library  to use the
-            extended (wide-character)  functions.   The  <STRONG>curses.h</STRONG>
-            file   which  is  installed  for  the  wide-character
-            library is designed to be compatible with the  normal
+            piling for the  wide-character  library  to  use  the
+            extended  (wide-character)  functions.   The <STRONG>curses.h</STRONG>
+            file  which  is  installed  for  the   wide-character
+            library  is designed to be compatible with the normal
             library's header.  Only the size of the <STRONG>WINDOW</STRONG> struc-
-            ture differs, and very few applications require  more
-            than  a  pointer  to  <STRONG>WINDOW</STRONG>s.   If  the  headers are
-            installed  allowing  overwrite,  the   wide-character
-            library's  headers should be installed last, to allow
-            applications to be built using  either  library  from
+            ture  differs, and very few applications require more
+            than a  pointer  to  <STRONG>WINDOW</STRONG>s.   If  the  headers  are
+            installed   allowing  overwrite,  the  wide-character
+            library's headers should be installed last, to  allow
+            applications  to  be  built using either library from
             the same set of headers.
 
        --with-pthread
             library names have a "t" appended to them (before any
             "w" added by <STRONG>--enable-widec</STRONG>).
 
-            The  global  variables  such as <STRONG>LINES</STRONG> are replaced by
-            macros to allow read-only access.  At the same  time,
-            setter-functions  are  provided  to set these values.
-            Some applications (very few) may require  changes  to
+            The global variables such as <STRONG>LINES</STRONG>  are  replaced  by
+            macros  to allow read-only access.  At the same time,
+            setter-functions are provided to  set  these  values.
+            Some  applications  (very few) may require changes to
             work with this convention.
 
        --with-shared
        --with-debug
 
        --with-profile
-            The  shared  and normal (static) library names differ
-            by their  suffixes,  e.g.,  <STRONG>libncurses.so</STRONG>  and  <STRONG>libn-</STRONG>
-            <STRONG>curses.a</STRONG>.   The  debug  and profiling libraries add a
+            The shared and normal (static) library  names  differ
+            by  their  suffixes,  e.g.,  <STRONG>libncurses.so</STRONG>  and <STRONG>libn-</STRONG>
+            <STRONG>curses.a</STRONG>.  The debug and profiling  libraries  add  a
             "_g" and a "_p" to the root names respectively, e.g.,
             <STRONG>libncurses_g.a</STRONG> and <STRONG>libncurses_p.a</STRONG>.
 
        --with-trace
-            The  <STRONG>trace</STRONG>  function  normally  resides  in the debug
+            The <STRONG>trace</STRONG> function  normally  resides  in  the  debug
             library, but it is sometimes useful to configure this
-            in  the  shared  library.   Configure  scripts should
+            in the  shared  library.   Configure  scripts  should
             check for the function's existence rather than assum-
             ing it is always in the debug library.
 
 
 </PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
        /usr/share/tabset
-            directory  containing  initialization  files  for the
+            directory containing  initialization  files  for  the
             terminal capability database /usr/share/terminfo ter-
             minal capability database
 
 
 </PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
-       <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>  and  related  pages whose names begin "curs_"
+       <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> and related pages whose  names  begin  "curs_"
        for detailed routine descriptions.
        <STRONG><A HREF="curs_variables.3x.html">curs_variables(3x)</A></STRONG>
 
        The  <STRONG>ncurses</STRONG>  library  can  be  compiled  with  an  option
        (<STRONG>-DUSE_GETCAP</STRONG>) that falls back to the old-style /etc/term-
        cap file if the terminal setup code cannot find a terminfo
-       entry  corresponding  to <STRONG>TERM</STRONG>.  Use of this feature is not
-       recommended, as it essentially includes an entire  termcap
-       compiler  in the <STRONG>ncurses</STRONG> startup code, at significant cost
+       entry corresponding to <STRONG>TERM</STRONG>.  Use of this feature  is  not
+       recommended,  as it essentially includes an entire termcap
+       compiler in the <STRONG>ncurses</STRONG> startup code, at significant  cost
        in core and startup cycles.
 
-       The <STRONG>ncurses</STRONG>  library  includes  facilities  for  capturing
-       mouse  events on certain terminals (including xterm).  See
+       The  <STRONG>ncurses</STRONG>  library  includes  facilities  for capturing
+       mouse events on certain terminals (including xterm).   See
        the <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG> manual page for details.
 
-       The <STRONG>ncurses</STRONG> library includes facilities for responding  to
-       window  resizing  events,  e.g., when running in an xterm.
-       See the <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG> and <STRONG><A HREF="wresize.3x.html">wresize(3x)</A></STRONG>  manual  pages  for
-       details.   In addition, the library may be configured with
+       The  <STRONG>ncurses</STRONG> library includes facilities for responding to
+       window resizing events, e.g., when running  in  an  xterm.
+       See  the  <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>  and <STRONG><A HREF="wresize.3x.html">wresize(3x)</A></STRONG> manual pages for
+       details.  In addition, the library may be configured  with
        a SIGWINCH handler.
 
-       The <STRONG>ncurses</STRONG> library extends the fixed set of function  key
-       capabilities  of  terminals  by  allowing  the application
-       designer to define additional key  sequences  at  runtime.
+       The  <STRONG>ncurses</STRONG> library extends the fixed set of function key
+       capabilities of  terminals  by  allowing  the  application
+       designer  to  define  additional key sequences at runtime.
        See the <STRONG><A HREF="define_key.3x.html">define_key(3x)</A></STRONG> <STRONG><A HREF="key_defined.3x.html">key_defined(3x)</A></STRONG>, and <STRONG><A HREF="keyok.3x.html">keyok(3x)</A></STRONG> man-
        ual pages for details.
 
        The <STRONG>ncurses</STRONG> library can exploit the capabilities of termi-
-       nals  which  implement the ISO-6429 SGR 39 and SGR 49 con-
+       nals which implement the ISO-6429 SGR 39 and SGR  49  con-
        trols, which allow an application to reset the terminal to
-       its  original  foreground and background colors.  From the
-       users' perspective, the application is able to  draw  col-
-       ored  text  on  a  background  whose color is set indepen-
-       dently, providing better  control  over  color  contrasts.
+       its original foreground and background colors.   From  the
+       users'  perspective,  the application is able to draw col-
+       ored text on a background  whose  color  is  set  indepen-
+       dently,  providing  better  control  over color contrasts.
        See the <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG> manual page for details.
 
-       The  <STRONG>ncurses</STRONG>  library  includes  a  function for directing
-       application output to a printer attached to  the  terminal
+       The <STRONG>ncurses</STRONG> library  includes  a  function  for  directing
+       application  output  to a printer attached to the terminal
        device.  See the <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG> manual page for details.
 
 
 </PRE><H2><a name="h2-PORTABILITY">PORTABILITY</a></H2><PRE>
-       The  <STRONG>ncurses</STRONG>  library is intended to be BASE-level confor-
+       The <STRONG>ncurses</STRONG> library is intended to be  BASE-level  confor-
        mant with XSI Curses.  The EXTENDED XSI Curses functional-
        ity (including color support) is supported.
 
-       A  small  number of local differences (that is, individual
-       differences between the XSI Curses and <STRONG>ncurses</STRONG> calls)  are
-       described  in  <STRONG>PORTABILITY</STRONG>  sections  of  the  library man
+       A small number of local differences (that  is,  individual
+       differences  between the XSI Curses and <STRONG>ncurses</STRONG> calls) are
+       described in  <STRONG>PORTABILITY</STRONG>  sections  of  the  library  man
        pages.
 
-       Unlike other implementations, this one  checks  parameters
-       such  as  pointers to WINDOW structures to ensure they are
-       not null.  The main reason for providing this behavior  is
+       Unlike  other  implementations, this one checks parameters
+       such as pointers to WINDOW structures to ensure  they  are
+       not  null.  The main reason for providing this behavior is
        to guard against programmer error.  The standard interface
        does not provide a way for the library to tell an applica-
-       tion  which  of  several  possible  errors  were detected.
-       Relying on this (or some other) extension  will  adversely
+       tion which  of  several  possible  errors  were  detected.
+       Relying  on  this (or some other) extension will adversely
        affect the portability of curses applications.
 
        This implementation also contains several extensions:
 
-       <STRONG>o</STRONG>   The  routine  <STRONG>has_key</STRONG>  is  not part of XPG4, nor is it
-           present in SVr4.  See the <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>  manual  page
+       <STRONG>o</STRONG>   The routine <STRONG>has_key</STRONG> is not part of  XPG4,  nor  is  it
+           present  in  SVr4.  See the <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG> manual page
            for details.
 
-       <STRONG>o</STRONG>   The  routine  <STRONG>slk_attr</STRONG>  is not part of XPG4, nor is it
+       <STRONG>o</STRONG>   The routine <STRONG>slk_attr</STRONG> is not part of XPG4,  nor  is  it
            present in SVr4.  See the <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG> manual page for
            details.
 
        <STRONG>o</STRONG>   The routines <STRONG>getmouse</STRONG>, <STRONG>mousemask</STRONG>, <STRONG>ungetmouse</STRONG>, <STRONG>mousein-</STRONG>
            <STRONG>terval</STRONG>, and <STRONG>wenclose</STRONG> relating to mouse interfacing are
-           not  part  of XPG4, nor are they present in SVr4.  See
+           not part of XPG4, nor are they present in  SVr4.   See
            the <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG> manual page for details.
 
-       <STRONG>o</STRONG>   The routine <STRONG>mcprint</STRONG> was not present  in  any  previous
-           curses  implementation.  See the <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG> manual
+       <STRONG>o</STRONG>   The  routine  <STRONG>mcprint</STRONG>  was not present in any previous
+           curses implementation.  See the <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG>  manual
            page for details.
 
-       <STRONG>o</STRONG>   The routine <STRONG>wresize</STRONG> is not part of  XPG4,  nor  is  it
-           present  in SVr4.  See the <STRONG><A HREF="wresize.3x.html">wresize(3x)</A></STRONG> manual page for
+       <STRONG>o</STRONG>   The  routine  <STRONG>wresize</STRONG>  is  not part of XPG4, nor is it
+           present in SVr4.  See the <STRONG><A HREF="wresize.3x.html">wresize(3x)</A></STRONG> manual page  for
            details.
 
-       <STRONG>o</STRONG>   The WINDOW structure's internal details can be  hidden
-           from  application  programs.   See <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG> for
+       <STRONG>o</STRONG>   The  WINDOW structure's internal details can be hidden
+           from application programs.   See  <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>  for
            the discussion of <STRONG>is_scrollok</STRONG>, etc.
 
        <STRONG>o</STRONG>   This implementation can be configured to provide rudi-
-           mentary  support for multi-threaded applications.  See
+           mentary support for multi-threaded applications.   See
            <STRONG><A HREF="curs_threads.3x.html">curs_threads(3x)</A></STRONG> for details.
 
-       <STRONG>o</STRONG>   This implementation can also be configured to  provide
+       <STRONG>o</STRONG>   This  implementation can also be configured to provide
            a set of functions which improve the ability to manage
            multiple screens.  See <STRONG><A HREF="curs_sp_funcs.3x.html">curs_sp_funcs(3x)</A></STRONG> for details.
 
-       In historic curses versions, delays embedded in the  capa-
+       In  historic curses versions, delays embedded in the capa-
        bilities <STRONG>cr</STRONG>, <STRONG>ind</STRONG>, <STRONG>cub1</STRONG>, <STRONG>ff</STRONG> and <STRONG>tab</STRONG> activated corresponding
-       delay bits in the UNIX tty driver.   In  this  implementa-
-       tion,  all  padding  is  done  by sending NUL bytes.  This
-       method is slightly more expensive, but narrows the  inter-
-       face  to  the  UNIX kernel significantly and increases the
+       delay  bits  in  the UNIX tty driver.  In this implementa-
+       tion, all padding is done  by  sending  NUL  bytes.   This
+       method  is slightly more expensive, but narrows the inter-
+       face to the UNIX kernel significantly  and  increases  the
        package's portability correspondingly.
 
 
 </PRE><H2><a name="h2-NOTES">NOTES</a></H2><PRE>
-       The header  file  <STRONG>&lt;curses.h&gt;</STRONG>  automatically  includes  the
+       The  header  file  <STRONG>&lt;curses.h&gt;</STRONG>  automatically  includes the
        header files <STRONG>&lt;stdio.h&gt;</STRONG> and <STRONG>&lt;unctrl.h&gt;</STRONG>.
 
-       If  standard  output from a <STRONG>ncurses</STRONG> program is re-directed
-       to something which is not a tty, screen  updates  will  be
+       If standard output from a <STRONG>ncurses</STRONG> program  is  re-directed
+       to  something  which  is not a tty, screen updates will be
        directed to standard error.  This was an undocumented fea-
        ture of AT&amp;T System V Release 3 curses.
 
 
 </PRE><H2><a name="h2-AUTHORS">AUTHORS</a></H2><PRE>
-       Zeyd M. Ben-Halim, Eric  S.  Raymond,  Thomas  E.  Dickey.
+       Zeyd  M.  Ben-Halim,  Eric  S.  Raymond, Thomas E. Dickey.
        Based on pcurses by Pavel Curtis.