<!--
* t
****************************************************************************
- * Copyright (c) 1998-2006,2007 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2010,2011 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: ncurses.3x,v 1.89 2007/09/01 18:57:29 tom Exp @
+ * @Id: ncurses.3x,v 1.103 2011/02/05 23:21:29 tom Exp @
-->
<HTML>
<HEAD>
sonable optimization. This implementation is ``new
curses'' (ncurses) and is the approved replacement for
4.4BSD classic curses, which has been discontinued. This
- describes <STRONG>ncurses</STRONG> version 5.6 (patch 20080621).
-
- The <STRONG>ncurses</STRONG> library emulates the <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG> library of
- System V Release 4 UNIX, and XPG4 (X/Open Portability
- Guide) curses (also known as XSI curses). XSI stands for
- X/Open System Interfaces Extension. The <STRONG>ncurses</STRONG> library
- is freely redistributable in source form. Differences
- from the SVr4 curses are summarized under the <STRONG>EXTENSIONS</STRONG>
- and <STRONG>PORTABILITY</STRONG> sections below and described in detail in
- the respective <STRONG>EXTENSIONS</STRONG>, <STRONG>PORTABILITY</STRONG> and <STRONG>BUGS</STRONG> sections
- of individual man pages.
+ describes <STRONG>ncurses</STRONG> version 5.8 (patch 20110226).
+
+ The <STRONG>ncurses</STRONG> library emulates the curses library of System
+ V Release 4 UNIX, and XPG4 (X/Open Portability Guide)
+ curses (also known as XSI curses). XSI stands for X/Open
+ System Interfaces Extension. The <STRONG>ncurses</STRONG> library is
+ freely redistributable in source form. Differences from
+ the SVr4 curses are summarized under the <STRONG>EXTENSIONS</STRONG> and
+ <STRONG>PORTABILITY</STRONG> sections below and described in detail in the
+ respective <STRONG>EXTENSIONS</STRONG>, <STRONG>PORTABILITY</STRONG> and <STRONG>BUGS</STRONG> sections of
+ individual man pages.
The <STRONG>ncurses</STRONG> library also provides many useful extensions,
i.e., features which cannot be implemented by a simple
lation; use of soft label keys; terminfo capabilities; and
access to low-level terminal-manipulation routines.
- To initialize the routines, the routine <STRONG>initscr</STRONG> or <STRONG>newterm</STRONG>
- must be called before any of the other routines that deal
- with windows and screens are used. The routine <STRONG>endwin</STRONG>
- must be called before exiting. To get character-at-a-time
- input without echoing (most interactive, screen oriented
- programs want this), the following sequence should be
- used:
+ The library uses the locale which the calling program has
+ initialized. That is normally done with <STRONG>setlocale</STRONG>:
+
+ <STRONG>setlocale(LC_ALL,</STRONG> <STRONG>"");</STRONG>
+
+ If the locale is not initialized, the library assumes that
+ characters are printable as in ISO-8859-1, to work with
+ certain legacy programs. You should initialize the locale
+ and not rely on specific details of the library when the
+ locale has not been setup.
+
+ The function <STRONG>initscr</STRONG> or <STRONG>newterm</STRONG> must be called to initial-
+ ize the library before any of the other routines that deal
+ with windows and screens are used. The routine <STRONG>endwin</STRONG>
+ must be called before exiting.
+
+ To get character-at-a-time input without echoing (most
+ interactive, screen oriented programs want this), the fol-
+ lowing sequence should be used:
<STRONG>initscr();</STRONG> <STRONG>cbreak();</STRONG> <STRONG>noecho();</STRONG>
<STRONG>intrflush(stdscr,</STRONG> <STRONG>FALSE);</STRONG>
<STRONG>keypad(stdscr,</STRONG> <STRONG>TRUE);</STRONG>
- Before a <STRONG>curses</STRONG> program is run, the tab stops of the
- terminal should be set and its initialization strings, if
+ Before a <STRONG>curses</STRONG> program is run, the tab stops of the ter-
+ minal should be set and its initialization strings, if
defined, must be output. This can be done by executing
the <STRONG>tput</STRONG> <STRONG>init</STRONG> command after the shell environment variable
<STRONG>TERM</STRONG> has been exported. <STRONG>tset(1)</STRONG> is usually responsible
ncursesw
the so-called "wide" library, which handles
- multibyte characters (See the section on
+ multibyte characters (see the section on
<STRONG>ALTERNATE</STRONG> <STRONG>CONFIGURATIONS</STRONG>). The "wide" library
includes all of the calls from the "normal"
library. It adds about one third more calls
--------------------------------------------
COLOR_PAIR <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
PAIR_NUMBER <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
+ _nc_free_and_exit <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
+
+ _nc_freeall <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
_nc_tracebits <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
_traceattr <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
_traceattr2 <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
add_wchnstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
add_wchstr <STRONG><A HREF="curs_add_wchstr.3x.html">curs_add_wchstr(3x)</A></STRONG>
addch <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
-
addchnstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
addchstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
addnstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
echo <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
echo_wchar <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
echochar <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
+
endwin <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
erase <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
erasechar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
getbegy <STRONG><A HREF="curs_legacy.3x.html">curs_legacy(3x)</A></STRONG>*
getbegyx <STRONG><A HREF="curs_getyx.3x.html">curs_getyx(3x)</A></STRONG>
getbkgd <STRONG><A HREF="curs_bkgd.3x.html">curs_bkgd(3x)</A></STRONG>
-
getbkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
getcchar <STRONG><A HREF="curs_getcchar.3x.html">curs_getcchar(3x)</A></STRONG>
getch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
intrflush <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
inwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
is_cleared <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+
is_idcok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_idlok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_immedok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_wintouched <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
isendwin <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
key_defined <STRONG><A HREF="key_defined.3x.html">key_defined(3x)</A></STRONG>*
-
key_name <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
keybound <STRONG><A HREF="keybound.3x.html">keybound(3x)</A></STRONG>*
keyname <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
mvinsch <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
mvinsnstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
mvinsstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
+
mvinstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
mvinwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
mvprintw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
mvwaddchstr <STRONG><A HREF="curs_addchstr.3x.html">curs_addchstr(3x)</A></STRONG>
mvwaddnstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
mvwaddnwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
-
mvwaddstr <STRONG><A HREF="curs_addstr.3x.html">curs_addstr(3x)</A></STRONG>
mvwaddwstr <STRONG><A HREF="curs_addwstr.3x.html">curs_addwstr(3x)</A></STRONG>
mvwchgat <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
pair_content <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
pechochar <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
pnoutrefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
+
prefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
printw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
putp <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
resizeterm <STRONG><A HREF="resizeterm.3x.html">resizeterm(3x)</A></STRONG>*
restartterm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
ripoffline <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
-
savetty <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>
scanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
scr_dump <STRONG><A HREF="curs_scr_dump.3x.html">curs_scr_dump(3x)</A></STRONG>
tigetstr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
timeout <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
touchline <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
+
touchwin <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
tparm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
tputs <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
use_default_colors <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>*
use_env <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
use_extended_names <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
-
use_legacy_coding <STRONG><A HREF="legacy_coding.3x.html">legacy_coding(3x)</A></STRONG>*
vid_attr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
vid_puts <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
wgetbkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
wgetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
wgetn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
+
wgetnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
wgetstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
whline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
winnwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
wins_nwstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
wins_wch <STRONG><A HREF="curs_ins_wch.3x.html">curs_ins_wch(3x)</A></STRONG>
-
wins_wstr <STRONG><A HREF="curs_ins_wstr.3x.html">curs_ins_wstr(3x)</A></STRONG>
winsch <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
winsdelln <STRONG><A HREF="curs_deleteln.3x.html">curs_deleteln(3x)</A></STRONG>
entries to the value of this symbol. Very few ter-
minfo entries provide this feature.
+ Because this name is also used in development envi-
+ ronments to represent the C compiler's name, <STRONG>ncurses</STRONG>
+ ignores it if it does not happen to be a single char-
+ acter.
+
COLUMNS
Specify the width of the screen in characters.
- Applications running in a windowing environment usu-
- ally are able to obtain the width of the window in
- which they are executing. If neither the <STRONG>COLUMNS</STRONG>
- value nor the terminal's screen size is available,
- <STRONG>ncurses</STRONG> uses the size which may be specified in the
+ Applications running in a windowing environment usu-
+ ally are able to obtain the width of the window in
+ which they are executing. If neither the <STRONG>COLUMNS</STRONG>
+ value nor the terminal's screen size is available,
+ <STRONG>ncurses</STRONG> uses the size which may be specified in the
terminfo database (i.e., the <STRONG>cols</STRONG> capability).
- It is important that your application use a correct
- size for the screen. This is not always possible
- because your application may be running on a host
- which does not honor NAWS (Negotiations About Window
- Size), or because you are temporarily running as
- another user. However, setting <STRONG>COLUMNS</STRONG> and/or <STRONG>LINES</STRONG>
+ It is important that your application use a correct
+ size for the screen. This is not always possible
+ because your application may be running on a host
+ which does not honor NAWS (Negotiations About Window
+ Size), or because you are temporarily running as
+ another user. However, setting <STRONG>COLUMNS</STRONG> and/or <STRONG>LINES</STRONG>
overrides the library's use of the screen size
obtained from the operating system.
- Either <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> symbols may be specified
- independently. This is mainly useful to circumvent
- legacy misfeatures of terminal descriptions, e.g.,
+ Either <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> symbols may be specified
+ independently. This is mainly useful to circumvent
+ legacy misfeatures of terminal descriptions, e.g.,
xterm which commonly specifies a 65 line screen. For
- best results, <STRONG>lines</STRONG> and <STRONG>cols</STRONG> should not be specified
+ best results, <STRONG>lines</STRONG> and <STRONG>cols</STRONG> should not be specified
in a terminal description for terminals which are run
as emulations.
the screen size.
ESCDELAY
- Specifies the total time, in milliseconds, for which
- ncurses will await a character sequence, e.g., a
- function key. The default value, 1000 milliseconds,
+ Specifies the total time, in milliseconds, for which
+ ncurses will await a character sequence, e.g., a
+ function key. The default value, 1000 milliseconds,
is enough for most uses. However, it is made a vari-
able to accommodate unusual applications.
The most common instance where you may wish to change
- this value is to work with slow hosts, e.g., running
- on a network. If the host cannot read characters
- rapidly enough, it will have the same effect as if
- the terminal did not send characters rapidly enough.
+ this value is to work with slow hosts, e.g., running
+ on a network. If the host cannot read characters
+ rapidly enough, it will have the same effect as if
+ the terminal did not send characters rapidly enough.
The library will still see a timeout.
- Note that xterm mouse events are built up from char-
- acter sequences received from the xterm. If your
+ Note that xterm mouse events are built up from char-
+ acter sequences received from the xterm. If your
application makes heavy use of multiple-clicking, you
- may wish to lengthen this default value because the
- timeout applies to the composed multi-click event as
+ may wish to lengthen this default value because the
+ timeout applies to the composed multi-click event as
well as the individual clicks.
- In addition to the environment variable, this imple-
- mentation provides a global variable with the same
+ In addition to the environment variable, this imple-
+ mentation provides a global variable with the same
name. Portable applications should not rely upon the
- presence of ESCDELAY in either form, but setting the
- environment variable rather than the global variable
- does not create problems when compiling an applica-
+ presence of ESCDELAY in either form, but setting the
+ environment variable rather than the global variable
+ does not create problems when compiling an applica-
tion.
- HOME Tells <STRONG>ncurses</STRONG> where your home directory is. That is
+ HOME Tells <STRONG>ncurses</STRONG> where your home directory is. That is
where it may read and write auxiliary terminal
descriptions:
$HOME/.terminfo
LINES
- Like COLUMNS, specify the height of the screen in
- characters. See COLUMNS for a detailed description.
+ Like COLUMNS, specify the height of the screen in
+ characters. See COLUMNS for a detailed description.
MOUSE_BUTTONS_123
This applies only to the OS/2 EMX port. It specifies
- the order of buttons on the mouse. OS/2 numbers a
+ the order of buttons on the mouse. OS/2 numbers a
3-button mouse inconsistently from other platforms:
1 = left
3 = middle.
This symbol lets you customize the mouse. The symbol
- must be three numeric digits 1-3 in any order, e.g.,
- 123 or 321. If it is not specified, <STRONG>ncurses</STRONG> uses
+ must be three numeric digits 1-3 in any order, e.g.,
+ 123 or 321. If it is not specified, <STRONG>ncurses</STRONG> uses
132.
NCURSES_ASSUMED_COLORS
- Override the compiled-in assumption that the termi-
- nal's default colors are white-on-black (see
- <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>). You may set the foreground and
- background color values with this environment vari-
- able by proving a 2-element list: foreground,back-
- ground. For example, to tell ncurses to not assume
- anything about the colors, set this to "-1,-1". To
- make it green-on-black, set it to "2,0". Any posi-
+ Override the compiled-in assumption that the termi-
+ nal's default colors are white-on-black (see
+ <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG>). You may set the foreground and
+ background color values with this environment vari-
+ able by proving a 2-element list: foreground,back-
+ ground. For example, to tell ncurses to not assume
+ anything about the colors, set this to "-1,-1". To
+ make it green-on-black, set it to "2,0". Any posi-
tive value from zero to the terminfo <STRONG>max_colors</STRONG> value
is allowed.
+ NCURSES_GPM_TERMS
+ This applies only to ncurses configured to use the
+ GPM interface.
+
+ If present, the environment variable is a list of one
+ or more terminal names against which the TERM envi-
+ ronment variable is matched. Setting it to an empty
+ value disables the GPM interface; using the built-in
+ support for xterm, etc.
+
+ If the environment variable is absent, ncurses will
+ attempt to open GPM if TERM contains "linux".
+
NCURSES_NO_HARD_TABS
- <STRONG>Ncurses</STRONG> may use tabs as part of the cursor movement
- optimization. In some cases, your terminal driver
- may not handle these properly. Set this environment
+ <STRONG>Ncurses</STRONG> may use tabs as part of the cursor movement
+ optimization. In some cases, your terminal driver
+ may not handle these properly. Set this environment
variable to disable the feature. You can also adjust
your <STRONG>stty</STRONG> settings to avoid the problem.
NCURSES_NO_MAGIC_COOKIES
Some terminals use a magic-cookie feature which
- requires special handling to make highlighting and
- other video attributes display properly. You can
- suppress the highlighting entirely for these termi-
+ requires special handling to make highlighting and
+ other video attributes display properly. You can
+ suppress the highlighting entirely for these termi-
nals by setting this environment variable.
NCURSES_NO_PADDING
- Most of the terminal descriptions in the terminfo
- database are written for real "hardware" terminals.
- Many people use terminal emulators which run in a
- windowing environment and use curses-based applica-
- tions. Terminal emulators can duplicate all of the
+ Most of the terminal descriptions in the terminfo
+ database are written for real "hardware" terminals.
+ Many people use terminal emulators which run in a
+ windowing environment and use curses-based applica-
+ tions. Terminal emulators can duplicate all of the
important aspects of a hardware terminal, but they do
- not have the same limitations. The chief limitation
- of a hardware terminal from the standpoint of your
+ not have the same limitations. The chief limitation
+ of a hardware terminal from the standpoint of your
application is the management of dataflow, i.e., tim-
ing. Unless a hardware terminal is interfaced into a
- terminal concentrator (which does flow control), it
- (or your application) must manage dataflow, prevent-
- ing overruns. The cheapest solution (no hardware
+ terminal concentrator (which does flow control), it
+ (or your application) must manage dataflow, prevent-
+ ing overruns. The cheapest solution (no hardware
cost) is for your program to do this by pausing after
- operations that the terminal does slowly, such as
+ operations that the terminal does slowly, such as
clearing the display.
- As a result, many terminal descriptions (including
- the vt100) have delay times embedded. You may wish
- to use these descriptions, but not want to pay the
+ As a result, many terminal descriptions (including
+ the vt100) have delay times embedded. You may wish
+ to use these descriptions, but not want to pay the
performance penalty.
- Set the NCURSES_NO_PADDING symbol to disable all but
- mandatory padding. Mandatory padding is used as a
+ Set the NCURSES_NO_PADDING symbol to disable all but
+ mandatory padding. Mandatory padding is used as a
part of special control sequences such as <EM>flash</EM>.
NCURSES_NO_SETBUF
- Normally <STRONG>ncurses</STRONG> enables buffered output during ter-
- minal initialization. This is done (as in SVr4
- curses) for performance reasons. For testing pur-
+ Normally <STRONG>ncurses</STRONG> enables buffered output during ter-
+ minal initialization. This is done (as in SVr4
+ curses) for performance reasons. For testing pur-
poses, both of <STRONG>ncurses</STRONG> and certain applications, this
feature is made optional. Setting the
NCURSES_NO_SETBUF variable disables output buffering,
- leaving the output in the original (usually line
+ leaving the output in the original (usually line
buffered) mode.
NCURSES_NO_UTF8_ACS
During initialization, the <STRONG>ncurses</STRONG> library checks for
- special cases where VT100 line-drawing (and the cor-
- responding alternate character set capabilities)
- described in the terminfo are known to be missing.
- Specifically, when running in a UTF-8 locale, the
- Linux console emulator and the GNU screen program
- ignore these. Ncurses checks the TERM environment
- variable for these. For other special cases, you
- should set this environment variable. Doing this
- tells ncurses to use Unicode values which correspond
+ special cases where VT100 line-drawing (and the cor-
+ responding alternate character set capabilities)
+ described in the terminfo are known to be missing.
+ Specifically, when running in a UTF-8 locale, the
+ Linux console emulator and the GNU screen program
+ ignore these. Ncurses checks the TERM environment
+ variable for these. For other special cases, you
+ should set this environment variable. Doing this
+ tells ncurses to use Unicode values which correspond
to the VT100 line-drawing glyphs. That works for the
special cases cited, and is likely to work for termi-
nal emulators.
- When setting this variable, you should set it to a
- nonzero value. Setting it to zero (or to a nonnum-
- ber) disables the special check for Linux and screen.
+ When setting this variable, you should set it to a
+ nonzero value. Setting it to zero (or to a nonnum-
+ ber) disables the special check for "linux" and
+ "screen".
+
+ As an alternative to the environment variable,
+ ncurses checks for an extended terminfo capability
+ <STRONG>U8</STRONG>. This is a numeric capability which can be com-
+ piled using <STRONG>tic</STRONG> <STRONG>-x</STRONG>. For example
+
+ # linux console, if patched to provide working
+ # VT100 shift-in/shift-out, with corresponding font.
+ linux-vt100|linux console with VT100 line-graphics,
+ U8#0, use=linux,
+
+ # uxterm with vt100Graphics resource set to false
+ xterm-utf8|xterm relying on UTF-8 line-graphics,
+ U8#1, use=xterm,
+
+ The name "U8" is chosen to be two characters, to per-
+ mit it to be used by applications that use ncurses'
+ termcap interface.
NCURSES_TRACE
During initialization, the <STRONG>ncurses</STRONG> debugging library
not the only way to change the list of directories.
The complete list of directories in order follows:
- - the last directory to which <STRONG>ncurses</STRONG> wrote, if any,
- is searched first
+ <STRONG>o</STRONG> the last directory to which <STRONG>ncurses</STRONG> wrote, if
+ any, is searched first
- - the directory specified by the TERMINFO symbol
+ <STRONG>o</STRONG> the directory specified by the TERMINFO symbol
- - $HOME/.terminfo
+ <STRONG>o</STRONG> $HOME/.terminfo
- - directories listed in the TERMINFO_DIRS symbol
+ <STRONG>o</STRONG> directories listed in the TERMINFO_DIRS symbol
- - one or more directories whose names are configured
- and compiled into the ncurses library, e.g.,
- /usr/share/terminfo
+ <STRONG>o</STRONG> one or more directories whose names are config-
+ ured and compiled into the ncurses library, e.g.,
+ /usr/share/terminfo
TERMINFO_DIRS
Specifies a list of directories to search for termi-
extended (wide-character) functions. The <STRONG>curses.h</STRONG>
file which is installed for the wide-character
library is designed to be compatible with the normal
- library's header. Only the size of the <STRONG>WINDOW</STRONG>
- structure differs, and very few applications require
- more than a pointer to <STRONG>WINDOW</STRONG>s. If the headers are
+ library's header. Only the size of the <STRONG>WINDOW</STRONG> struc-
+ ture differs, and very few applications require more
+ than a pointer to <STRONG>WINDOW</STRONG>s. If the headers are
installed allowing overwrite, the wide-character
library's headers should be installed last, to allow
applications to be built using either library from
--with-profile
The shared and normal (static) library names differ
- by their suffixes, e.g., <STRONG>libncurses.so</STRONG> and <STRONG>libn-</STRONG>
- <STRONG>curses.a</STRONG>. The debug and profiling libraries add a
- "_g" and a "_p" to the root names respectively, e.g.,
- <STRONG>libncurses_g.a</STRONG> and <STRONG>libncurses_p.a</STRONG>.
+ by their suffixes, e.g., <STRONG>libncurses.so</STRONG> and
+ <STRONG>libncurses.a</STRONG>. The debug and profiling libraries add
+ a "_g" and a "_p" to the root names respectively,
+ e.g., <STRONG>libncurses_g.a</STRONG> and <STRONG>libncurses_p.a</STRONG>.
--with-trace
The <STRONG>trace</STRONG> function normally resides in the debug
<H2>SEE ALSO</H2><PRE>
<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> and related pages whose names begin "curs_"
for detailed routine descriptions.
+ <STRONG><A HREF="curs_variables.3x.html">curs_variables(3x)</A></STRONG>
</PRE>
trols, which allow an application to reset the terminal to
its original foreground and background colors. From the
users' perspective, the application is able to draw col-
- ored text on a background whose color is set
- independently, providing better control over color con-
- trasts. See the <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG> manual page for
- details.
+ ored text on a background whose color is set indepen-
+ dently, providing better control over color contrasts.
+ See the <STRONG><A HREF="default_colors.3x.html">default_colors(3x)</A></STRONG> manual page for details.
- The <STRONG>ncurses</STRONG> library includes a function for directing
- application output to a printer attached to the terminal
+ The <STRONG>ncurses</STRONG> library includes a function for directing
+ application output to a printer attached to the terminal
device. See the <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG> manual page for details.
</PRE>
<H2>PORTABILITY</H2><PRE>
- The <STRONG>ncurses</STRONG> library is intended to be BASE-level confor-
+ The <STRONG>ncurses</STRONG> library is intended to be BASE-level confor-
mant with XSI Curses. The EXTENDED XSI Curses functional-
ity (including color support) is supported.
- A small number of local differences (that is, individual
- differences between the XSI Curses and <STRONG>ncurses</STRONG> calls) are
- described in <STRONG>PORTABILITY</STRONG> sections of the library man
+ A small number of local differences (that is, individual
+ differences between the XSI Curses and <STRONG>ncurses</STRONG> calls) are
+ described in <STRONG>PORTABILITY</STRONG> sections of the library man
pages.
This implementation also contains several extensions:
- The routine <STRONG>has_key</STRONG> is not part of XPG4, nor is it
- present in SVr4. See the <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG> manual page
- for details.
+ <STRONG>o</STRONG> The routine <STRONG>has_key</STRONG> is not part of XPG4, nor is it
+ present in SVr4. See the <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG> manual page
+ for details.
+
+ <STRONG>o</STRONG> The routine <STRONG>slk_attr</STRONG> is not part of XPG4, nor is it
+ present in SVr4. See the <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG> manual page for
+ details.
+
+ <STRONG>o</STRONG> The routines <STRONG>getmouse</STRONG>, <STRONG>mousemask</STRONG>, <STRONG>ungetmouse</STRONG>, <STRONG>mousein-</STRONG>
+ <STRONG>terval</STRONG>, and <STRONG>wenclose</STRONG> relating to mouse interfacing are
+ not part of XPG4, nor are they present in SVr4. See
+ the <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG> manual page for details.
- The routine <STRONG>slk_attr</STRONG> is not part of XPG4, nor is it
- present in SVr4. See the <STRONG><A HREF="curs_slk.3x.html">curs_slk(3x)</A></STRONG> manual page
- for details.
+ <STRONG>o</STRONG> The routine <STRONG>mcprint</STRONG> was not present in any previous
+ curses implementation. See the <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG> manual
+ page for details.
- The routines <STRONG>getmouse</STRONG>, <STRONG>mousemask</STRONG>, <STRONG>ungetmouse</STRONG>, <STRONG>mou-</STRONG>
- <STRONG>seinterval</STRONG>, and <STRONG>wenclose</STRONG> relating to mouse interfac-
- ing are not part of XPG4, nor are they present in
- SVr4. See the <STRONG><A HREF="curs_mouse.3x.html">curs_mouse(3x)</A></STRONG> manual page for
- details.
+ <STRONG>o</STRONG> The routine <STRONG>wresize</STRONG> is not part of XPG4, nor is it
+ present in SVr4. See the <STRONG><A HREF="wresize.3x.html">wresize(3x)</A></STRONG> manual page for
+ details.
- The routine <STRONG>mcprint</STRONG> was not present in any previous
- curses implementation. See the <STRONG><A HREF="curs_print.3x.html">curs_print(3x)</A></STRONG> manual
- page for details.
+ <STRONG>o</STRONG> The WINDOW structure's internal details can be hidden
+ from application programs. See <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG> for
+ the discussion of <STRONG>is_scrollok</STRONG>, etc.
- The routine <STRONG>wresize</STRONG> is not part of XPG4, nor is it
- present in SVr4. See the <STRONG><A HREF="wresize.3x.html">wresize(3x)</A></STRONG> manual page for
- details.
+ <STRONG>o</STRONG> This implementation can be configured to provide rudi-
+ mentary support for multi-threaded applications. See
+ <STRONG><A HREF="curs_threads.3x.html">curs_threads(3x)</A></STRONG> for details.
- The WINDOW structure's internal details can be hidden
- from application programs. See <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG> for
- the discussion of <STRONG>is_scrollok</STRONG>, etc.
+ <STRONG>o</STRONG> This implementation can also be configured to provide
+ a set of functions which improve the ability to manage
+ multiple screens. See <STRONG><A HREF="curs_sp_funcs.3x.html">curs_sp_funcs(3x)</A></STRONG> for details.
- In historic curses versions, delays embedded in the capa-
+ In historic curses versions, delays embedded in the capa-
bilities <STRONG>cr</STRONG>, <STRONG>ind</STRONG>, <STRONG>cub1</STRONG>, <STRONG>ff</STRONG> and <STRONG>tab</STRONG> activated corresponding
- delay bits in the UNIX tty driver. In this implementa-
- tion, all padding is done by sending NUL bytes. This
- method is slightly more expensive, but narrows the inter-
- face to the UNIX kernel significantly and increases the
+ delay bits in the UNIX tty driver. In this implementa-
+ tion, all padding is done by sending NUL bytes. This
+ method is slightly more expensive, but narrows the inter-
+ face to the UNIX kernel significantly and increases the
package's portability correspondingly.
</PRE>
<H2>NOTES</H2><PRE>
- The header file <STRONG><curses.h></STRONG> automatically includes the
+ The header file <STRONG><curses.h></STRONG> automatically includes the
header files <STRONG><stdio.h></STRONG> and <STRONG><unctrl.h></STRONG>.
- If standard output from a <STRONG>ncurses</STRONG> program is re-directed
- to something which is not a tty, screen updates will be
+ If standard output from a <STRONG>ncurses</STRONG> program is re-directed
+ to something which is not a tty, screen updates will be
directed to standard error. This was an undocumented fea-
ture of AT&T System V Release 3 curses.
</PRE>
<H2>AUTHORS</H2><PRE>
- Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey.
+ Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey.
Based on pcurses by Pavel Curtis.
projects / ncurses.git / blobdiff