<!--
* t
****************************************************************************
- * Copyright (c) 1998-2010,2011 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2012,2013 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: ncurses.3x,v 1.106 2011/12/17 23:19:59 tom Exp @
+ * @Id: ncurses.3x,v 1.111 2013/03/02 22:15:25 tom Exp @
-->
<HTML>
<HEAD>
sonable optimization. This implementation is ``new
curses'' (ncurses) and is the approved replacement for
4.4BSD classic curses, which has been discontinued. This
- describes <STRONG>ncurses</STRONG> version 5.9 (patch 20120107).
+ describes <STRONG>ncurses</STRONG> version 5.9 (patch 20130309).
The <STRONG>ncurses</STRONG> library emulates the curses library of System
V Release 4 UNIX, and XPG4 (X/Open Portability Guide)
Among those, the most basic routines are <STRONG>move</STRONG> and <STRONG>addch</STRONG>.
More general versions of these routines are included with
names beginning with <STRONG>w</STRONG>, allowing the user to specify a
- window. The routines not beginning with <STRONG>w</STRONG> affect <STRONG>stdscr</STRONG>.
+ window. The routines not beginning with <STRONG>w</STRONG> affect <STRONG>stdscr</STRONG>.
- After using routines to manipulate a window, <STRONG>refresh</STRONG> is
- called, telling <STRONG>curses</STRONG> to make the user's CRT screen look
- like <STRONG>stdscr</STRONG>. The characters in a window are actually of
- type <STRONG>chtype</STRONG>, (character and attribute data) so that other
- information about the character may also be stored with
+ After using routines to manipulate a window, <STRONG>refresh</STRONG> is
+ called, telling <STRONG>curses</STRONG> to make the user's CRT screen look
+ like <STRONG>stdscr</STRONG>. The characters in a window are actually of
+ type <STRONG>chtype</STRONG>, (character and attribute data) so that other
+ information about the character may also be stored with
each character.
- Special windows called <EM>pads</EM> may also be manipulated.
+ Special windows called <EM>pads</EM> may also be manipulated.
These are windows which are not constrained to the size of
- the screen and whose contents need not be completely dis-
+ the screen and whose contents need not be completely dis-
played. See <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG> for more information.
- In addition to drawing characters on the screen, video
- attributes and colors may be supported, causing the char-
- acters to show up in such modes as underlined, in reverse
- video, or in color on terminals that support such display
+ In addition to drawing characters on the screen, video
+ attributes and colors may be supported, causing the char-
+ acters to show up in such modes as underlined, in reverse
+ video, or in color on terminals that support such display
enhancements. Line drawing characters may be specified to
- be output. On input, <STRONG>curses</STRONG> is also able to translate
- arrow and function keys that transmit escape sequences
- into single values. The video attributes, line drawing
- characters, and input values use names, defined in
+ be output. On input, <STRONG>curses</STRONG> is also able to translate
+ arrow and function keys that transmit escape sequences
+ into single values. The video attributes, line drawing
+ characters, and input values use names, defined in
<STRONG><curses.h></STRONG>, such as <STRONG>A_REVERSE</STRONG>, <STRONG>ACS_HLINE</STRONG>, and <STRONG>KEY_LEFT</STRONG>.
If the environment variables <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> are set, or
- if the program is executing in a window environment, line
- and column information in the environment will override
+ if the program is executing in a window environment, line
+ and column information in the environment will override
information read by <EM>terminfo</EM>. This would affect a program
- running in an AT&T 630 layer, for example, where the size
+ running in an AT&T 630 layer, for example, where the size
of a screen is changeable (see <STRONG>ENVIRONMENT</STRONG>).
- If the environment variable <STRONG>TERMINFO</STRONG> is defined, any pro-
- gram using <STRONG>curses</STRONG> checks for a local terminal definition
- before checking in the standard place. For example, if
+ If the environment variable <STRONG>TERMINFO</STRONG> is defined, any pro-
+ gram using <STRONG>curses</STRONG> checks for a local terminal definition
+ before checking in the standard place. For example, if
<STRONG>TERM</STRONG> is set to <STRONG>att4424</STRONG>, then the compiled terminal defini-
tion is found in
<STRONG>/usr/share/terminfo/a/att4424</STRONG>.
(The <STRONG>a</STRONG> is copied from the first letter of <STRONG>att4424</STRONG> to avoid
- creation of huge directories.) However, if <STRONG>TERMINFO</STRONG> is
+ creation of huge directories.) However, if <STRONG>TERMINFO</STRONG> is
set to <STRONG>$HOME/myterms</STRONG>, <STRONG>curses</STRONG> first checks
<STRONG>$HOME/myterms/a/att4424</STRONG>,
<STRONG>/usr/share/terminfo/a/att4424</STRONG>.
- This is useful for developing experimental definitions or
+ This is useful for developing experimental definitions or
when write permission in <STRONG>/usr/share/terminfo</STRONG> is not avail-
able.
- The integer variables <STRONG>LINES</STRONG> and <STRONG>COLS</STRONG> are defined in
- <STRONG><curses.h></STRONG> and will be filled in by <STRONG>initscr</STRONG> with the size
+ The integer variables <STRONG>LINES</STRONG> and <STRONG>COLS</STRONG> are defined in
+ <STRONG><curses.h></STRONG> and will be filled in by <STRONG>initscr</STRONG> with the size
of the screen. The constants <STRONG>TRUE</STRONG> and <STRONG>FALSE</STRONG> have the val-
ues <STRONG>1</STRONG> and <STRONG>0</STRONG>, respectively.
- The <STRONG>curses</STRONG> routines also define the <STRONG>WINDOW</STRONG> <STRONG>*</STRONG> variable
+ The <STRONG>curses</STRONG> routines also define the <STRONG>WINDOW</STRONG> <STRONG>*</STRONG> variable
<STRONG>curscr</STRONG> which is used for certain low-level operations like
- clearing and redrawing a screen containing garbage. The
+ clearing and redrawing a screen containing garbage. The
<STRONG>curscr</STRONG> can be used in only a few routines.
<STRONG>Routine</STRONG> <STRONG>and</STRONG> <STRONG>Argument</STRONG> <STRONG>Names</STRONG>
- Many <STRONG>curses</STRONG> routines have two or more versions. The rou-
+ Many <STRONG>curses</STRONG> routines have two or more versions. The rou-
tines prefixed with <STRONG>w</STRONG> require a window argument. The rou-
tines prefixed with <STRONG>p</STRONG> require a pad argument. Those with-
out a prefix generally use <STRONG>stdscr</STRONG>.
The routines prefixed with <STRONG>mv</STRONG> require a <EM>y</EM> and <EM>x</EM> coordinate
- to move to before performing the appropriate action. The
- <STRONG>mv</STRONG> routines imply a call to <STRONG>move</STRONG> before the call to the
- other routine. The coordinate <EM>y</EM> always refers to the row
- (of the window), and <EM>x</EM> always refers to the column. The
+ to move to before performing the appropriate action. The
+ <STRONG>mv</STRONG> routines imply a call to <STRONG>move</STRONG> before the call to the
+ other routine. The coordinate <EM>y</EM> always refers to the row
+ (of the window), and <EM>x</EM> always refers to the column. The
upper left-hand corner is always (0,0), not (1,1).
The routines prefixed with <STRONG>mvw</STRONG> take both a window argument
- and <EM>x</EM> and <EM>y</EM> coordinates. The window argument is always
+ and <EM>x</EM> and <EM>y</EM> coordinates. The window argument is always
specified before the coordinates.
- In each case, <EM>win</EM> is the window affected, and <EM>pad</EM> is the
+ In each case, <EM>win</EM> is the window affected, and <EM>pad</EM> is the
pad affected; <EM>win</EM> and <EM>pad</EM> are always pointers to type <STRONG>WIN-</STRONG>
<STRONG>DOW</STRONG>.
Option setting routines require a Boolean flag <EM>bf</EM> with the
- value <STRONG>TRUE</STRONG> or <STRONG>FALSE</STRONG>; <EM>bf</EM> is always of type <STRONG>bool</STRONG>. Most of
- the data types used in the library routines, such as <STRONG>WIN-</STRONG>
- <STRONG>DOW</STRONG>, <STRONG>SCREEN</STRONG>, <STRONG>bool</STRONG>, and <STRONG>chtype</STRONG> are defined in <STRONG><curses.h></STRONG>.
- Types used for the terminfo routines such as <STRONG>TERMINAL</STRONG> are
+ value <STRONG>TRUE</STRONG> or <STRONG>FALSE</STRONG>; <EM>bf</EM> is always of type <STRONG>bool</STRONG>. Most of
+ the data types used in the library routines, such as <STRONG>WIN-</STRONG>
+ <STRONG>DOW</STRONG>, <STRONG>SCREEN</STRONG>, <STRONG>bool</STRONG>, and <STRONG>chtype</STRONG> are defined in <STRONG><curses.h></STRONG>.
+ Types used for the terminfo routines such as <STRONG>TERMINAL</STRONG> are
defined in <STRONG><term.h></STRONG>.
- This manual page describes functions which may appear in
- any configuration of the library. There are two common
+ This manual page describes functions which may appear in
+ any configuration of the library. There are two common
configurations of the library:
ncurses
the "normal" library, which handles 8-bit
characters. The normal (8-bit) library stores
- characters combined with attributes in <STRONG>chtype</STRONG>
+ characters combined with attributes in <STRONG>chtype</STRONG>
data.
- Attributes alone (no corresponding character)
- may be stored in <STRONG>chtype</STRONG> or the equivalent
- <STRONG>attr_t</STRONG> data. In either case, the data is
+ Attributes alone (no corresponding character)
+ may be stored in <STRONG>chtype</STRONG> or the equivalent
+ <STRONG>attr_t</STRONG> data. In either case, the data is
stored in something like an integer.
- Each cell (row and column) in a <STRONG>WINDOW</STRONG> is
+ Each cell (row and column) in a <STRONG>WINDOW</STRONG> is
stored as a <STRONG>chtype</STRONG>.
ncursesw
- the so-called "wide" library, which handles
- multibyte characters (see the section on
+ the so-called "wide" library, which handles
+ multibyte characters (see the section on
<STRONG>ALTERNATE</STRONG> <STRONG>CONFIGURATIONS</STRONG>). The "wide" library
- includes all of the calls from the "normal"
- library. It adds about one third more calls
+ includes all of the calls from the "normal"
+ library. It adds about one third more calls
using data types which store multibyte charac-
ters:
<STRONG>cchar_t</STRONG>
- corresponds to <STRONG>chtype</STRONG>. However it is a
- structure, because more data is stored
- than can fit into an integer. The char-
+ corresponds to <STRONG>chtype</STRONG>. However it is a
+ structure, because more data is stored
+ than can fit into an integer. The char-
acters are large enough to require a full
- integer value - and there may be more
- than one character per cell. The video
- attributes and color are stored in sepa-
+ integer value - and there may be more
+ than one character per cell. The video
+ attributes and color are stored in sepa-
rate fields of the structure.
Each cell (row and column) in a <STRONG>WINDOW</STRONG> is
stored as a <STRONG>cchar_t</STRONG>.
<STRONG>wchar_t</STRONG>
- stores a "wide" character. Like <STRONG>chtype</STRONG>,
+ stores a "wide" character. Like <STRONG>chtype</STRONG>,
this may be an integer.
<STRONG>wint_t</STRONG>
- stores a <STRONG>wchar_t</STRONG> or <STRONG>WEOF</STRONG> - not the same,
+ stores a <STRONG>wchar_t</STRONG> or <STRONG>WEOF</STRONG> - not the same,
though both may have the same size.
The "wide" library provides new functions
- which are analogous to functions in the "nor-
- mal" library. There is a naming convention
- which relates many of the normal/wide vari-
- ants: a "_w" is inserted into the name. For
+ which are analogous to functions in the "nor-
+ mal" library. There is a naming convention
+ which relates many of the normal/wide vari-
+ ants: a "_w" is inserted into the name. For
example, <STRONG>waddch</STRONG> becomes <STRONG>wadd_wch</STRONG>.
-
<STRONG>Routine</STRONG> <STRONG>Name</STRONG> <STRONG>Index</STRONG>
The following table lists each <STRONG>curses</STRONG> routine and the name
- of the manual page on which it is described. Routines
- flagged with `*' are ncurses-specific, not described by
+ of the manual page on which it is described. Routines
+ flagged with `*' are ncurses-specific, not described by
XPG4 or present in SVr4.
-
<STRONG>curses</STRONG> Routine Name Manual Page Name
--------------------------------------------
COLOR_PAIR <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
PAIR_NUMBER <STRONG><A HREF="curs_attr.3x.html">curs_attr(3x)</A></STRONG>
_nc_free_and_exit <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
-
_nc_freeall <STRONG><A HREF="curs_memleaks.3x.html">curs_memleaks(3x)</A></STRONG>*
_nc_tracebits <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
+
_traceattr <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
_traceattr2 <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
_tracechar <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
echo <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
echo_wchar <STRONG><A HREF="curs_add_wch.3x.html">curs_add_wch(3x)</A></STRONG>
echochar <STRONG><A HREF="curs_addch.3x.html">curs_addch(3x)</A></STRONG>
-
endwin <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>
erase <STRONG><A HREF="curs_clear.3x.html">curs_clear(3x)</A></STRONG>
+
erasechar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
erasewchar <STRONG><A HREF="curs_termattrs.3x.html">curs_termattrs(3x)</A></STRONG>
filter <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
intrflush <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
inwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
is_cleared <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
-
is_idcok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_idlok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
+
is_immedok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_keypad <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
is_leaveok <STRONG><A HREF="curs_opaque.3x.html">curs_opaque(3x)</A></STRONG>*
mvinsch <STRONG><A HREF="curs_insch.3x.html">curs_insch(3x)</A></STRONG>
mvinsnstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
mvinsstr <STRONG><A HREF="curs_insstr.3x.html">curs_insstr(3x)</A></STRONG>
-
mvinstr <STRONG><A HREF="curs_instr.3x.html">curs_instr(3x)</A></STRONG>
mvinwstr <STRONG><A HREF="curs_inwstr.3x.html">curs_inwstr(3x)</A></STRONG>
+
mvprintw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
mvscanw <STRONG><A HREF="curs_scanw.3x.html">curs_scanw(3x)</A></STRONG>
mvvline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
pair_content <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>
pechochar <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
pnoutrefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
-
prefresh <STRONG><A HREF="curs_pad.3x.html">curs_pad(3x)</A></STRONG>
printw <STRONG><A HREF="curs_printw.3x.html">curs_printw(3x)</A></STRONG>
+
putp <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
putwin <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
qiflush <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
tigetstr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
timeout <STRONG><A HREF="curs_inopts.3x.html">curs_inopts(3x)</A></STRONG>
touchline <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
-
touchwin <STRONG><A HREF="curs_touch.3x.html">curs_touch(3x)</A></STRONG>
tparm <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
+
tputs <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>
tputs <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
trace <STRONG><A HREF="curs_trace.3x.html">curs_trace(3x)</A></STRONG>*
use_env <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
use_extended_names <STRONG><A HREF="curs_extend.3x.html">curs_extend(3x)</A></STRONG>*
use_legacy_coding <STRONG><A HREF="legacy_coding.3x.html">legacy_coding(3x)</A></STRONG>*
+ use_tioctl <STRONG><A HREF="curs_util.3x.html">curs_util(3x)</A></STRONG>
vid_attr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
vid_puts <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
vidattr <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>
wgetbkgrnd <STRONG><A HREF="curs_bkgrnd.3x.html">curs_bkgrnd(3x)</A></STRONG>
wgetch <STRONG><A HREF="curs_getch.3x.html">curs_getch(3x)</A></STRONG>
wgetn_wstr <STRONG><A HREF="curs_get_wstr.3x.html">curs_get_wstr(3x)</A></STRONG>
-
wgetnstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
+
wgetstr <STRONG><A HREF="curs_getstr.3x.html">curs_getstr(3x)</A></STRONG>
whline <STRONG><A HREF="curs_border.3x.html">curs_border(3x)</A></STRONG>
whline_set <STRONG><A HREF="curs_border_set.3x.html">curs_border_set(3x)</A></STRONG>
</PRE>
<H2>RETURN VALUE</H2><PRE>
- Routines that return an integer return <STRONG>ERR</STRONG> upon failure
- and an integer value other than <STRONG>ERR</STRONG> upon successful com-
- pletion, unless otherwise noted in the routine descrip-
+ Routines that return an integer return <STRONG>ERR</STRONG> upon failure
+ and an integer value other than <STRONG>ERR</STRONG> upon successful com-
+ pletion, unless otherwise noted in the routine descrip-
tions.
As a general rule, routines check for null pointers passed
as parameters, and handle this as an error.
- All macros return the value of the <STRONG>w</STRONG> version, except
+ All macros return the value of the <STRONG>w</STRONG> version, except
<STRONG>setscrreg</STRONG>, <STRONG>wsetscrreg</STRONG>, <STRONG>getyx</STRONG>, <STRONG>getbegyx</STRONG>, and <STRONG>getmaxyx</STRONG>. The
- return values of <STRONG>setscrreg</STRONG>, <STRONG>wsetscrreg</STRONG>, <STRONG>getyx</STRONG>, <STRONG>getbegyx</STRONG>,
+ return values of <STRONG>setscrreg</STRONG>, <STRONG>wsetscrreg</STRONG>, <STRONG>getyx</STRONG>, <STRONG>getbegyx</STRONG>,
and <STRONG>getmaxyx</STRONG> are undefined (i.e., these should not be used
as the right-hand side of assignment statements).
important ones have been already discussed in detail.
BAUDRATE
- The debugging library checks this environment symbol
- when the application has redirected output to a file.
- The symbol's numeric value is used for the baudrate.
- If no value is found, <STRONG>ncurses</STRONG> uses 9600. This allows
- testers to construct repeatable test-cases that take
- into account costs that depend on baudrate.
+ The debugging library checks this environment vari-
+ able when the application has redirected output to a
+ file. The variable's numeric value is used for the
+ baudrate. If no value is found, <STRONG>ncurses</STRONG> uses 9600.
+ This allows testers to construct repeatable test-
+ cases that take into account costs that depend on
+ baudrate.
CC When set, change occurrences of the command_character
(i.e., the <STRONG>cmdch</STRONG> capability) of the loaded terminfo
- entries to the value of this symbol. Very few ter-
+ entries to the value of this variable. Very few ter-
minfo entries provide this feature.
Because this name is also used in development envi-
as emulations.
Use the <STRONG>use_env</STRONG> function to disable all use of exter-
- nal environment (including system calls) to determine
- the screen size.
+ nal environment (but not including system calls) to
+ determine the screen size. Use the <STRONG>use_tioctl</STRONG> func-
+ tion to update <STRONG>COLUMNS</STRONG> or <STRONG>LINES</STRONG> to match the screen
+ size obtained from system calls or the terminal data-
+ base.
ESCDELAY
- Specifies the total time, in milliseconds, for which
- ncurses will await a character sequence, e.g., a
- function key. The default value, 1000 milliseconds,
+ Specifies the total time, in milliseconds, for which
+ ncurses will await a character sequence, e.g., a
+ function key. The default value, 1000 milliseconds,
is enough for most uses. However, it is made a vari-
able to accommodate unusual applications.
The most common instance where you may wish to change
- this value is to work with slow hosts, e.g., running
- on a network. If the host cannot read characters
- rapidly enough, it will have the same effect as if
- the terminal did not send characters rapidly enough.
+ this value is to work with slow hosts, e.g., running
+ on a network. If the host cannot read characters
+ rapidly enough, it will have the same effect as if
+ the terminal did not send characters rapidly enough.
The library will still see a timeout.
- Note that xterm mouse events are built up from char-
- acter sequences received from the xterm. If your
+ Note that xterm mouse events are built up from char-
+ acter sequences received from the xterm. If your
application makes heavy use of multiple-clicking, you
- may wish to lengthen this default value because the
- timeout applies to the composed multi-click event as
+ may wish to lengthen this default value because the
+ timeout applies to the composed multi-click event as
well as the individual clicks.
- In addition to the environment variable, this imple-
- mentation provides a global variable with the same
+ In addition to the environment variable, this imple-
+ mentation provides a global variable with the same
name. Portable applications should not rely upon the
- presence of ESCDELAY in either form, but setting the
- environment variable rather than the global variable
- does not create problems when compiling an applica-
+ presence of ESCDELAY in either form, but setting the
+ environment variable rather than the global variable
+ does not create problems when compiling an applica-
tion.
- HOME Tells <STRONG>ncurses</STRONG> where your home directory is. That is
+ HOME Tells <STRONG>ncurses</STRONG> where your home directory is. That is
where it may read and write auxiliary terminal
descriptions:
$HOME/.terminfo
LINES
- Like COLUMNS, specify the height of the screen in
- characters. See COLUMNS for a detailed description.
+ Like COLUMNS, specify the height of the screen in
+ characters. See COLUMNS for a detailed description.
MOUSE_BUTTONS_123
This applies only to the OS/2 EMX port. It specifies
2 = right
3 = middle.
- This symbol lets you customize the mouse. The symbol
- must be three numeric digits 1-3 in any order, e.g.,
- 123 or 321. If it is not specified, <STRONG>ncurses</STRONG> uses
- 132.
+ This variable lets you customize the mouse. The
+ variable must be three numeric digits 1-3 in any
+ order, e.g., 123 or 321. If it is not specified,
+ <STRONG>ncurses</STRONG> uses 132.
NCURSES_ASSUMED_COLORS
Override the compiled-in assumption that the termi-
Some terminals use a magic-cookie feature which
requires special handling to make highlighting and
other video attributes display properly. You can
- suppress the highlighting entirely for these
- terminals by setting this environment variable.
+ suppress the highlighting entirely for these termi-
+ nals by setting this environment variable.
NCURSES_NO_PADDING
Most of the terminal descriptions in the terminfo
to use these descriptions, but not want to pay the
performance penalty.
- Set the NCURSES_NO_PADDING symbol to disable all but
- mandatory padding. Mandatory padding is used as a
- part of special control sequences such as <EM>flash</EM>.
+ Set the NCURSES_NO_PADDING environment variable to
+ disable all but mandatory padding. Mandatory padding
+ is used as a part of special control sequences such
+ as <EM>flash</EM>.
NCURSES_NO_SETBUF
- Normally <STRONG>ncurses</STRONG> enables buffered output during ter-
- minal initialization. This is done (as in SVr4
- curses) for performance reasons. For testing pur-
- poses, both of <STRONG>ncurses</STRONG> and certain applications, this
- feature is made optional. Setting the
- NCURSES_NO_SETBUF variable disables output buffering,
- leaving the output in the original (usually line
- buffered) mode.
+ This setting is obsolete. Before changes
+
+ <STRONG>o</STRONG> started with 5.9 patch 20120825 and
+
+ <STRONG>o</STRONG> continued though 5.9 patch 20130126
+
+ <STRONG>ncurses</STRONG> enabled buffered output during terminal ini-
+ tialization. This was done (as in SVr4 curses) for
+ performance reasons. For testing purposes, both of
+ <STRONG>ncurses</STRONG> and certain applications, this feature was
+ made optional. Setting the NCURSES_NO_SETBUF vari-
+ able disabled output buffering, leaving the output in
+ the original (usually line buffered) mode.
+
+ In the current implementation, ncurses performs its
+ own buffering and does not require this workaround.
+ It does not modify the buffering of the standard out-
+ put.
+
+ The reason for the change was to make the behavior
+ for interrupts and other signals more robust. One
+ drawback is that certain nonconventional programs
+ would mix ordinary stdio calls with ncurses calls and
+ (usually) work. This is no longer possible since
+ ncurses is not using the buffered standard output but
+ its own output (to the same file descriptor). As a
+ special case, the low-level calls such as <STRONG>putp</STRONG> still
+ use the standard output. But high-level curses calls
+ do not.
NCURSES_NO_UTF8_ACS
During initialization, the <STRONG>ncurses</STRONG> library checks for
# linux console, if patched to provide working
# VT100 shift-in/shift-out, with corresponding font.
linux-vt100|linux console with VT100 line-graphics,
- U8#0, use=linux,
+ U8#0, use=linux,
# uxterm with vt100Graphics resource set to false
xterm-utf8|xterm relying on UTF-8 line-graphics,
- U8#1, use=xterm,
+ U8#1, use=xterm,
The name "U8" is chosen to be two characters, to per-
mit it to be used by applications that use ncurses'
NCURSES_TRACE
During initialization, the <STRONG>ncurses</STRONG> debugging library
- checks the NCURSES_TRACE symbol. If it is defined,
- to a numeric value, <STRONG>ncurses</STRONG> calls the <STRONG>trace</STRONG> function,
- using that value as the argument.
+ checks the NCURSES_TRACE environment variable. If it
+ is defined, to a numeric value, <STRONG>ncurses</STRONG> calls the
+ <STRONG>trace</STRONG> function, using that value as the argument.
The argument values, which are defined in <STRONG>curses.h</STRONG>,
provide several types of information. When running
description in termcap form if it is not available in
the terminfo database.
- The TERMCAP symbol contains either a terminal
- description (with newlines stripped out), or a file
- name telling where the information denoted by the
- TERM symbol exists. In either case, setting it
- directs <STRONG>ncurses</STRONG> to ignore the usual place for this
- information, e.g., /etc/termcap.
+ The TERMCAP environment variable contains either a
+ terminal description (with newlines stripped out), or
+ a file name telling where the information denoted by
+ the TERM environment variable exists. In either
+ case, setting it directs <STRONG>ncurses</STRONG> to ignore the usual
+ place for this information, e.g., /etc/termcap.
TERMINFO
Overrides the directory in which <STRONG>ncurses</STRONG> searches for
<STRONG>o</STRONG> the last directory to which <STRONG>ncurses</STRONG> wrote, if
any, is searched first
- <STRONG>o</STRONG> the directory specified by the TERMINFO symbol
+ <STRONG>o</STRONG> the directory specified by the TERMINFO environ-
+ ment variable
<STRONG>o</STRONG> $HOME/.terminfo
- <STRONG>o</STRONG> directories listed in the TERMINFO_DIRS symbol
+ <STRONG>o</STRONG> directories listed in the TERMINFO_DIRS environ-
+ ment variable
<STRONG>o</STRONG> one or more directories whose names are config-
- ured and compiled into the ncurses library, e.g.,
- /usr/share/terminfo
+ ured and compiled into the ncurses library, i.e.,
+
+ <STRONG>o</STRONG> /usr/local/ncurses/share/ter-
+ minfo:/usr/share/terminfo (corresponding to
+ the TERMINFO_DIRS variable)
+
+ <STRONG>o</STRONG> /usr/share/terminfo (corresponding to the
+ TERMINFO variable)
TERMINFO_DIRS
Specifies a list of directories to search for termi-
nal descriptions. The list is separated by colons
- (i.e., ":") on Unix, semicolons on OS/2 EMX. All of
- the terminal descriptions are in terminfo form, which
- makes a subdirectory named for the first letter of
- the terminal names therein.
+ (i.e., ":") on Unix, semicolons on OS/2 EMX.
+
+ All of the terminal descriptions are in terminfo
+ form. Normally these are stored in a directory tree,
+ using subdirectories named by the first letter of the
+ terminal names therein.
If <STRONG>ncurses</STRONG> is built with a hashed database, then each
entry in this list can also be the path of the corre-
TERMPATH
If TERMCAP does not hold a file name then <STRONG>ncurses</STRONG>
- checks the TERMPATH symbol. This is a list of file-
- names separated by spaces or colons (i.e., ":") on
- Unix, semicolons on OS/2 EMX. If the TERMPATH symbol
- is not set, <STRONG>ncurses</STRONG> looks in the files /etc/termcap,
+ checks the TERMPATH environment variable. This is a
+ list of filenames separated by spaces or colons
+ (i.e., ":") on Unix, semicolons on OS/2 EMX.
+
+ If the TERMPATH environment variable is not set,
+ <STRONG>ncurses</STRONG> looks in the files /etc/termcap,
/usr/share/misc/termcap and $HOME/.termcap, in that
order.
The library may be configured to disregard the following
variables when the current user is the superuser (root),
- or if the application uses setuid or setgid permissions:
- $TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as $HOME.
+ or if the application uses setuid or setgid permissions:
+
+ $TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as
+ $HOME.
</PRE>
--with-profile
The shared and normal (static) library names differ
- by their suffixes, e.g., <STRONG>libncurses.so</STRONG> and
- <STRONG>libncurses.a</STRONG>. The debug and profiling libraries add
- a "_g" and a "_p" to the root names respectively,
- e.g., <STRONG>libncurses_g.a</STRONG> and <STRONG>libncurses_p.a</STRONG>.
+ by their suffixes, e.g., <STRONG>libncurses.so</STRONG> and <STRONG>libn-</STRONG>
+ <STRONG>curses.a</STRONG>. The debug and profiling libraries add a
+ "_g" and a "_p" to the root names respectively, e.g.,
+ <STRONG>libncurses_g.a</STRONG> and <STRONG>libncurses_p.a</STRONG>.
--with-trace
The <STRONG>trace</STRONG> function normally resides in the debug
<STRONG>o</STRONG> This implementation can also be configured to provide
a set of functions which improve the ability to manage
- multiple
screens. See <STRONG><A HREF="curs_sp_funcs.3x.html">curs_sp_funcs(3x)</A></STRONG> for details.
+ multiple screens. See <STRONG><A HREF="curs_sp_funcs.3x.html">curs_sp_funcs(3x)</A></STRONG> for details.
- In historic curses versions, delays embedded in the capa-
+ In historic curses versions, delays embedded in the capa-
bilities <STRONG>cr</STRONG>, <STRONG>ind</STRONG>, <STRONG>cub1</STRONG>, <STRONG>ff</STRONG> and <STRONG>tab</STRONG> activated corresponding
- delay bits in the UNIX tty driver. In this implementa-
- tion, all padding is done by sending NUL bytes. This
- method is slightly more expensive, but narrows the inter-
- face to the UNIX kernel significantly and increases the
+ delay bits in the UNIX tty driver. In this implementa-
+ tion, all padding is done by sending NUL bytes. This
+ method is slightly more expensive, but narrows the inter-
+ face to the UNIX kernel significantly and increases the
package's portability correspondingly.
</PRE>
<H2>NOTES</H2><PRE>
- The header file <STRONG><curses.h></STRONG> automatically includes the
+ The header file <STRONG><curses.h></STRONG> automatically includes the
header files <STRONG><stdio.h></STRONG> and <STRONG><unctrl.h></STRONG>.
- If standard output from a <STRONG>ncurses</STRONG> program is re-directed
- to something which is not a tty, screen updates will be
+ If standard output from a <STRONG>ncurses</STRONG> program is re-directed
+ to something which is not a tty, screen updates will be
directed to standard error. This was an undocumented fea-
ture of AT&T System V Release 3 curses.
</PRE>
<H2>AUTHORS</H2><PRE>
- Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey.
+ Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey.
Based on pcurses by Pavel Curtis.
projects / ncurses.git / blobdiff