+<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
+<!--
+ * t
+ * DO NOT EDIT THIS FILE BY HAND!
+ * It is generated from terminfo.head, Caps, and terminfo.tail.
+ * Note: this must be run through tbl before nroff.
+ * The magic cookie on the first line triggers this under some man programs.
+ ****************************************************************************
+ * Copyright (c) 1998-2000,2002 Free Software Foundation, Inc. *
+ * *
+ * Permission is hereby granted, free of charge, to any person obtaining a *
+ * copy of this software and associated documentation files (the *
+ * "Software"), to deal in the Software without restriction, including *
+ * without limitation the rights to use, copy, modify, merge, publish, *
+ * distribute, distribute with modifications, sublicense, and/or sell *
+ * copies of the Software, and to permit persons to whom the Software is *
+ * furnished to do so, subject to the following conditions: *
+ * *
+ * The above copyright notice and this permission notice shall be included *
+ * in all copies or substantial portions of the Software. *
+ * *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS *
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF *
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. *
+ * IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, *
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR *
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR *
+ * THE USE OR OTHER DEALINGS IN THE SOFTWARE. *
+ * *
+ * Except as contained in this notice, the name(s) of the above copyright *
+ * holders shall not be used in advertising or otherwise to promote the *
+ * sale, use or other dealings in this Software without prior written *
+ * authorization. *
+ ****************************************************************************
+ * @Id: terminfo.head,v 1.10 2002/08/17 23:37:10 tom Exp @
+ * Head of terminfo man page ends here
+ * @Id: terminfo.tail,v 1.35 2002/04/20 16:49:33 tom Exp @
+ * Beginning of terminfo.tail file
+ *.TH
+-->
<HTML>
+<HEAD>
+<TITLE>TERMINFO 5 File Formats</TITLE>
+<link rev=made href="mailto:bug-ncurses@gnu.org">
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+</HEAD>
<BODY>
+<H1>TERMINFO 5 File Formats</H1>
+<HR>
<PRE>
<!-- Manpage converted by man2html 3.0.1 -->
</PRE>
<H2>DESCRIPTION</H2><PRE>
- <I>Terminfo</I> is a data base describing terminals, used by
- screen-oriented programs such as <B><A HREF="nvi.1.html">nvi(1)</A></B>, <B><A HREF="rogue.1.html">rogue(1)</A></B> and
- libraries such as <B><A HREF="ncurses.3x.html">curses(3x)</A></B>. <I>Terminfo</I> describes termi-
+ <EM>Terminfo</EM> is a data base describing terminals, used by
+ screen-oriented programs such as <STRONG><A HREF="nvi.1.html">nvi(1)</A></STRONG>, <STRONG><A HREF="rogue.1.html">rogue(1)</A></STRONG> and
+ libraries such as <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>. <EM>Terminfo</EM> describes termi-
nals by giving a set of capabilities which they have, by
specifying how to perform screen operations, and by speci-
fying padding requirements and initialization sequences.
- Entries in <I>terminfo</I> consist of a sequence of `,' separated
- fields (embedded commas may be escaped with a backslash
- or notated as \072). White space after the `,' separator
- is ignored. The first entry for each terminal gives the
+ Entries in <EM>terminfo</EM> consist of a sequence of `,' separated
+ fields (embedded commas may be escaped with a backslash or
+ notated as \054). White space after the `,' separator is
+ ignored. The first entry for each terminal gives the
names which are known for the terminal, separated by `|'
characters. The first name given is the most common
abbreviation for the terminal, the last name given should
vt100-w. The following suffixes should be used where pos-
sible:
- <B>Suffix</B> <B>Meaning</B> <B>Example</B>
- -<I>nn</I> Number of lines on the screen aaa-60
- -<I>n</I>p Number of pages of memory c100-4p
+ <STRONG>Suffix</STRONG> <STRONG>Meaning</STRONG> <STRONG>Example</STRONG>
+ -<EM>nn</EM> Number of lines on the screen aaa-60
+ -<EM>n</EM>p Number of pages of memory c100-4p
-am With automargins (usually the default) vt100-am
-m Mono mode; suppress color ansi-m
-mc Magic cookie; spaces when highlighting wy30-mc
-vb Use visible bell instead of beep wy370-vb
-w Wide mode (> 80 columns, usually 132) vt100-w
- For more on terminal naming conventions, see the <B>term(7)</B>
+ For more on terminal naming conventions, see the <STRONG>term(7)</STRONG>
manual page.
- <B>Capabilities</B>
+ <STRONG>Capabilities</STRONG>
The following is a complete table of the capabilities
included in a terminfo description block and available to
terminfo-using code. In each line of the table,
- The <B>variable</B> is the name by which the programmer (at the
+ The <STRONG>variable</STRONG> is the name by which the programmer (at the
terminfo level) accesses the capability.
- The <B>capname</B> is the short name used in the text of the
+ The <STRONG>capname</STRONG> is the short name used in the text of the
database, and is used by a person updating the database.
Whenever possible, capnames are chosen to be the same as
or similar to the ANSI X3.64-1979 standard (now superseded
Semantics are also intended to match those of the specifi-
cation.
- The termcap code is the old <B>termcap</B> capability name (some
+ The termcap code is the old <STRONG>termcap</STRONG> capability name (some
capabilities are new, and have names which termcap did not
originate).
Capability names have no hard length limit, but an infor-
mal limit of 5 characters has been adopted to keep them
- short and to allow the tabs in the source file <B>Caps</B> to
+ short and to allow the tabs in the source file <STRONG>Caps</STRONG> to
line up nicely.
Finally, the description field attempts to convey the
(P) indicates that padding may be specified
#[1-9] in the description field indicates that the string
- is passed through tparm with parms as given (#<I>i</I>).
+ is passed through tparm with parms as given (#<EM>i</EM>).
(P*) indicates that padding may vary in proportion to
the number of lines affected
- (#<I>i</I>) indicates the <I>i</I>th parameter.
+ (#<EM>i</EM>) indicates the <EM>i</EM>th parameter.
These are the boolean capabilities:
- <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
- <B>Booleans</B> <B>name</B> <B>Code</B>
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Booleans</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
auto_left_margin bw bw cub1 wraps from col-
umn 0 to last column
auto_right_margin am am terminal has auto-
in insert mode
move_standout_mode msgr ms safe to move while
in standout mode
- needs_xon_xoff nxon nx padding won't work,
- xon/xoff required
+ needs_xon_xoff nxon nx padding will not
+ work, xon/xoff
+ required
no_esc_ctlc xsb xb beehive (f1=escape,
f2=ctrl C)
no_pad_char npc NP pad character does
not exist
+
+
non_dest_scroll_region ndscr ND scrolling region is
non-destructive
-
non_rev_rmcup nrrmc NR smcup does not
reverse rmcup
over_strike os os terminal can over-
strike
- prtr_silent mc5i 5i printer won't echo
- on screen
+ prtr_silent mc5i 5i printer will not
+ echo on screen
row_addr_glitch xvpa YD only positive motion
for vpa/mvpa caps
semi_auto_right_margin sam YE printing in last
column causes cr
status_line_esc_ok eslok es escape can be used
on the status line
- tilde_glitch hz hz can't print ~'s
+ tilde_glitch hz hz cannot print ~'s
(hazeltine)
transparent_underline ul ul underline character
overstrikes
These are the numeric capabilities:
- <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
- <B>Numeric</B> <B>name</B> <B>Code</B>
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
columns cols co number of columns in
a line
init_tabs it it tabs initially every
maximum_windows wnum MW maximum number of
defineable windows
no_color_video ncv NC video attributes
- that can't be used
+ that cannot be used
with colors
- num_labels nlab Nl number of labels on
- screen
+ num_labels nlab Nl number of labels on
+ screen
padding_baud_rate pb pb lowest baud rate
where padding needed
virtual_terminal vt vt virtual terminal
width_status_line wsl ws number of columns in
status line
- The following numeric capabilities are present in the
- SVr4.0 term structure, but are not yet documented in the
+ The following numeric capabilities are present in the
+ SVr4.0 term structure, but are not yet documented in the
man page. They came in with SVr4's printer support.
- <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
- <B>Numeric</B> <B>name</B> <B>Code</B>
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
bit_image_entwining bitwin Yo number of passes for
each bit-image row
bit_image_type bitype Yp type of bit-image
in units per inch
print_rate cps Ym print rate in char-
acters per second
+
+
wide_char_size widcs Yn character step size
when in double wide
mode
These are the string capabilities:
- <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
- <B>String</B> <B>name</B> <B>Code</B>
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
acs_chars acsc ac graphics charset
pairs, based on
vt100
cursor_address cup cm move to row #1
columns #2
cursor_down cud1 do down one line
+
+
cursor_home home ho home cursor (if no
cup)
cursor_invisible civis vi make cursor invisi-
ble
cursor_left cub1 le move left one space
-
cursor_mem_address mrcup CM memory relative cur-
sor addressing, move
to row #1 columns #2
riage motion
enter_micro_mode smicm ZJ Start micro-motion
mode
+
enter_near_letter_quality snlq ZK Enter NLQ mode
enter_normal_quality snrmq ZL Enter normal-quality
mode
enter_protected_mode prot mp turn on protected
mode
-
enter_reverse_mode rev mr turn on reverse
video mode
enter_secure_mode invis mk turn on blank mode
flash_hook hook fh flash switch hook
flash_screen flash vb visible bell (may
not move cursor)
+
form_feed ff ff hardcopy terminal
page eject (P*)
from_status_line fsl fs return from status
line
goto_window wingo WG go to window #1
-
hangup hup HU hang-up phone
init_1string is1 i1 initialization
string
in insert mode
key_end kend @7 end key
key_enter kent @8 enter/send key
+
+
key_eol kel kE clear-to-end-of-line
key
key_eos ked kS clear-to-end-of-
screen key
key_exit kext @9 exit key
key_f0 kf0 k0 F0 function key
-
key_f1 kf1 k1 F1 function key
key_f10 kf10 k; F10 function key
key_f11 kf11 F1 F11 function key
key_f5 kf5 k5 F5 function key
key_f50 kf50 Fe F50 function key
key_f51 kf51 Ff F51 function key
+
key_f52 kf52 Fg F52 function key
key_f53 kf53 Fh F53 function key
key_f54 kf54 Fi F54 function key
key_f55 kf55 Fj F55 function key
key_f56 kf56 Fk F56 function key
key_f57 kf57 Fl F57 function key
-
key_f58 kf58 Fm F58 function key
key_f59 kf59 Fn F59 function key
key_f6 kf6 k6 F6 function key
key
key_select kslt *6 select key
key_send kEND *7 shifted end key
+
key_seol kEOL *8 shifted clear-to-
end-of-line key
key_sexit kEXT *9 shifted exit key
key_sf kind kF scroll-forward key
key_sfind kFND *0 shifted find key
key_shelp kHLP #1 shifted help key
-
key_shome kHOM #2 shifted home key
key_sic kIC #3 shifted insert-char-
acter key
key f6 if not f6
lab_f7 lf7 l7 label on function
key f7 if not f7
+
+
lab_f8 lf8 l8 label on function
key f8 if not f8
lab_f9 lf9 l9 label on function
label_format fln Lf label format
label_off rmln LF turn off soft labels
label_on smln LO turn on soft labels
-
meta_off rmm mo turn off meta mode
meta_on smm mm turn on meta mode
(8th-bit on)
sor in micro mode
parm_rindex rin SR scroll back #1 lines
(P)
+
parm_up_cursor cuu UP up #1 lines (P*)
parm_up_micro mcuu Zi Like parm_up_cursor
in micro mode
pkey_key pfkey pk program function key
#1 to type string #2
-
-
-
pkey_local pfloc pl program function key
#1 to execute string
#2
line #1 or (if smgtp
is not given) #2
lines from bottom
+
set_clock sclk SC set clock, #1 hrs #2
mins #3 secs
set_color_pair scp sp Set current color
pair to #1
-
-
set_foreground setf Sf Set foreground color
#1
set_left_margin smgl ML set left soft margin
move past it
up_half_line hu hu half a line up
user0 u0 u0 User string #0
+
user1 u1 u1 User string #1
user2 u2 u2 User string #2
user3 u3 u3 User string #3
user4 u4 u4 User string #4
-
user5 u5 u5 User string #5
user6 u6 u6 User string #6
user7 u7 u7 User string #7
zero_motion zerom Zx No motion for subse-
quent character
- The following string capabilities are present in the
- SVr4.0 term structure, but were originally not documented
+ The following string capabilities are present in the
+ SVr4.0 term structure, but were originally not documented
in the man page.
- <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
- <B>String</B> <B>name</B> <B>Code</B>
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
alt_scancode_esc scesa S8 Alternate escape
for scancode emu-
lation
mode
exit_pc_charset_mode rmpch S3 Exit PC character
display mode
+
exit_scancode_mode rmsc S5 Exit PC scancode
mode
-
-
-
get_mouse getm Gm Curses should get
button events,
parameter #1 not
position
scancode_escape scesc S7 Escape for scan-
code emulation
- set0_des_seq s0ds s0 Shift to code set
- 0 (EUC set 0,
- ASCII)
- set1_des_seq s1ds s1 Shift to code set
- 1
- set2_des_seq s2ds s2 Shift to code set
- 2
- set3_des_seq s3ds s3 Shift to code set
- 3
+ set0_des_seq s0ds s0 Shift to codeset 0
+ (EUC set 0, ASCII)
+ set1_des_seq s1ds s1 Shift to codeset 1
+ set2_des_seq s2ds s2 Shift to codeset 2
+ set3_des_seq s3ds s3 Shift to codeset 3
set_a_background setab AB Set background
color to #1, using
ANSI escape
bottom margins to
#1, #2
- The XSI Curses standard added these. They are some
- post-4.1 versions of System V curses, e.g., Solaris 2.5
- and IRIX 6.x. The <B>ncurses</B> termcap names for them are
+ The XSI Curses standard added these. They are some
+ post-4.1 versions of System V curses, e.g., Solaris 2.5
+ and IRIX 6.x. The <STRONG>ncurses</STRONG> termcap names for them are
invented; according to the XSI Curses standard, they have
- no termcap names. If your compiled terminfo entries use
- these, they may not be binary-compatible with System V
+ no termcap names. If your compiled terminfo entries use
+ these, they may not be binary-compatible with System V
terminfo entries after SVr4.1; beware!
- <B>Variable</B> <B>Cap-</B> <B>TCap</B> <B>Description</B>
- <B>String</B> <B>name</B> <B>Code</B>
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+
+ <STRONG>String</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
enter_horizontal_hl_mode ehhlm Xh Enter horizontal
highlight mode
enter_left_hl_mode elhlm Xl Enter left highlight
an inch
- <B>A</B> <B>Sample</B> <B>Entry</B>
+ <STRONG>A</STRONG> <STRONG>Sample</STRONG> <STRONG>Entry</STRONG>
The following entry, describing an ANSI-standard terminal,
- is representative of what a <B>terminfo</B> entry for a modern
+ is representative of what a <STRONG>terminfo</STRONG> entry for a modern
terminal typically looks like.
ansi|ansi/pc-term compatible with color,
sgr0=\E[0;10m, tbc=\E[2g, u6=\E[%d;%dR, u7=\E[6n,
u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%p1%dd,
- Entries may continue onto multiple lines by placing white
- space at the beginning of each line except the first.
- Comments may be included on lines beginning with ``#''.
- Capabilities in <I>terminfo</I> are of three types: Boolean capa-
+ Entries may continue onto multiple lines by placing white
+ space at the beginning of each line except the first.
+ Comments may be included on lines beginning with ``#''.
+ Capabilities in <EM>terminfo</EM> are of three types: Boolean capa-
bilities which indicate that the terminal has some partic-
- ular feature, numeric capabilities giving the size of the
- terminal or the size of particular delays, and string
- capabilities, which give a sequence which can be used to
+ ular feature, numeric capabilities giving the size of the
+ terminal or the size of particular delays, and string
+ capabilities, which give a sequence which can be used to
perform particular terminal operations.
- <B>Types</B> <B>of</B> <B>Capabilities</B>
- All capabilities have names. For instance, the fact that
- ANSI-standard terminals have <I>automatic</I> <I>margins</I> (i.e., an
- automatic return and line-feed when the end of a line is
- reached) is indicated by the capability <B>am</B>. Hence the
- description of ansi includes <B>am</B>. Numeric capabilities are
- followed by the character `#' and then a positive value.
- Thus <B>cols</B>, which indicates the number of columns the ter-
- minal has, gives the value `80' for ansi. Values for
+ <STRONG>Types</STRONG> <STRONG>of</STRONG> <STRONG>Capabilities</STRONG>
+ All capabilities have names. For instance, the fact that
+ ANSI-standard terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an
+ automatic return and line-feed when the end of a line is
+ reached) is indicated by the capability <STRONG>am</STRONG>. Hence the
+ description of ansi includes <STRONG>am</STRONG>. Numeric capabilities are
+ followed by the character `#' and then a positive value.
+ Thus <STRONG>cols</STRONG>, which indicates the number of columns the ter-
+ minal has, gives the value `80' for ansi. Values for
numeric capabilities may be specified in decimal, octal or
- hexadecimal, using the C programming language conventions
+ hexadecimal, using the C programming language conventions
(e.g., 255, 0377 and 0xff or 0xFF).
- Finally, string valued capabilities, such as <B>el</B> (clear to
+ Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to
end of line sequence) are given by the two-character code,
- an `=', and then a string ending at the next following
+ an `=', and then a string ending at the next following
`,'.
- A number of escape sequences are provided in the string
+ A number of escape sequences are provided in the string
valued capabilities for easy encoding of characters there.
- Both <B>\E</B> and <B>\e</B> map to an ESCAPE character, <B>^x</B> maps to a
- control-x for any appropriate x, and the sequences <B>\n</B> <B>\l</B>
- <B>\r</B> <B>\t</B> <B>\b</B> <B>\f</B> <B>\s</B> give a newline, line-feed, return, tab,
- backspace, form-feed, and space. Other escapes include <B>\^</B>
- for <B>^</B>, <B>\\</B> for <B>\</B>, <B>\</B>, for comma, <B>\:</B> for <B>:</B>, and <B>\0</B> for null.
- (<B>\0</B> will produce \200, which does not terminate a string
+ Both <STRONG>\E</STRONG> and <STRONG>\e</STRONG> map to an ESCAPE character, <STRONG>^x</STRONG> maps to a
+ control-x for any appropriate x, and the sequences <STRONG>\n</STRONG> <STRONG>\l</STRONG>
+ <STRONG>\r</STRONG> <STRONG>\t</STRONG> <STRONG>\b</STRONG> <STRONG>\f</STRONG> <STRONG>\s</STRONG> give a newline, line-feed, return, tab,
+ backspace, form-feed, and space. Other escapes include <STRONG>\^</STRONG>
+ for <STRONG>^</STRONG>, <STRONG>\\</STRONG> for <STRONG>\</STRONG>, <STRONG>\</STRONG>, for comma, <STRONG>\:</STRONG> for <STRONG>:</STRONG>, and <STRONG>\0</STRONG> for null.
+ (<STRONG>\0</STRONG> will produce \200, which does not terminate a string
but behaves as a null character on most terminals, provid-
- ing CS7 is specified. See <B><A HREF="stty.1.html">stty(1)</A></B>.) Finally, characters
- may be given as three octal digits after a <B>\</B>.
+ ing CS7 is specified. See <STRONG><A HREF="stty.1.html">stty(1)</A></STRONG>.) Finally, characters
+ may be given as three octal digits after a <STRONG>\</STRONG>.
- A delay in milliseconds may appear anywhere in a string
- capability, enclosed in $<..> brackets, as in <B>el</B>=\EK$<5>,
- and padding characters are supplied by <I>tputs</I> to provide
- this delay. The delay must be a number with at most one
+ A delay in milliseconds may appear anywhere in a string
+ capability, enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>,
+ and padding characters are supplied by <EM>tputs</EM> to provide
+ this delay. The delay must be a number with at most one
decimal place of precision; it may be followed by suffixes
- `*' or '/' or both. A `*' indicates that the padding
- required is proportional to the number of lines affected
- by the operation, and the amount given is the per-
- affected-unit padding required. (In the case of insert
- character, the factor is still the number of <I>lines</I>
- affected.) Normally, padding is advisory if the device
- has the <B>xon</B> capability; it is used for cost computation
- but does not trigger delays. A `/' suffix indicates that
- the padding is mandatory and forces a delay of the given
- number of milliseconds even on devices for which <B>xon</B> is
+ `*' or '/' or both. A `*' indicates that the padding
+ required is proportional to the number of lines affected
+ by the operation, and the amount given is the per-
+ affected-unit padding required. (In the case of insert
+ character, the factor is still the number of <EM>lines</EM>
+ affected.) Normally, padding is advisory if the device
+ has the <STRONG>xon</STRONG> capability; it is used for cost computation
+ but does not trigger delays. A `/' suffix indicates that
+ the padding is mandatory and forces a delay of the given
+ number of milliseconds even on devices for which <STRONG>xon</STRONG> is
present to indicate flow control.
- Sometimes individual capabilities must be commented out.
- To do this, put a period before the capability name. For
- example, see the second <B>ind</B> in the example above.
+ Sometimes individual capabilities must be commented out.
+ To do this, put a period before the capability name. For
+ example, see the second <STRONG>ind</STRONG> in the example above.
-
- <B>Fetching</B> <B>Compiled</B> <B>Descriptions</B>
- If the environment variable TERMINFO is set, it is inter-
- preted as the pathname of a directory containing the com-
+ <STRONG>Fetching</STRONG> <STRONG>Compiled</STRONG> <STRONG>Descriptions</STRONG>
+ If the environment variable TERMINFO is set, it is inter-
+ preted as the pathname of a directory containing the com-
piled description you are working on. Only that directory
is searched.
- If TERMINFO is not set, the <B>ncurses</B> version of the ter-
- minfo reader code will instead look in the directory
- <B>$HOME/.terminfo</B> for a compiled description. If it fails
- to find one there, and the environment variable TER-
- MINFO_DIRS is set, it will interpret the contents of that
- variable as a list of colon- separated directories to be
- searched (an empty entry is interpreted as a command to
- search <I>/usr/share/terminfo</I>). If no description is found
- in any of the TERMINFO_DIRS directories, the fetch fails.
-
- If neither TERMINFO nor TERMINFO_DIRS is set, the last
- place tried will be the system terminfo directory,
- <I>/usr/share/terminfo</I>.
-
- (Neither the <B>$HOME/.terminfo</B> lookups nor TERMINFO_DIRS
- extensions are supported under stock System V ter-
+ If TERMINFO is not set, the <STRONG>ncurses</STRONG> version of the ter-
+ minfo reader code will instead look in the directory
+ <STRONG>$HOME/.terminfo</STRONG> for a compiled description. If it fails
+ to find one there, and the environment variable TER-
+ MINFO_DIRS is set, it will interpret the contents of that
+ variable as a list of colon- separated directories to be
+ searched (an empty entry is interpreted as a command to
+ search <EM>/usr/share/terminfo</EM>). If no description is found
+ in any of the TERMINFO_DIRS directories, the fetch fails.
+
+ If neither TERMINFO nor TERMINFO_DIRS is set, the last
+ place tried will be the system terminfo directory,
+ <EM>/usr/share/terminfo</EM>.
+
+ (Neither the <STRONG>$HOME/.terminfo</STRONG> lookups nor TERMINFO_DIRS
+ extensions are supported under stock System V ter-
minfo/curses.)
- <B>Preparing</B> <B>Descriptions</B>
- We now outline how to prepare descriptions of terminals.
- The most effective way to prepare a terminal description
- is by imitating the description of a similar terminal in
- <I>terminfo</I> and to build up a description gradually, using
- partial descriptions with <I>vi</I> or some other screen-oriented
- program to check that they are correct. Be aware that a
+ <STRONG>Preparing</STRONG> <STRONG>Descriptions</STRONG>
+ We now outline how to prepare descriptions of terminals.
+ The most effective way to prepare a terminal description
+ is by imitating the description of a similar terminal in
+ <EM>terminfo</EM> and to build up a description gradually, using
+ partial descriptions with <EM>vi</EM> or some other screen-oriented
+ program to check that they are correct. Be aware that a
very unusual terminal may expose deficiencies in the abil-
- ity of the <I>terminfo</I> file to describe it or bugs in the
+ ity of the <EM>terminfo</EM> file to describe it or bugs in the
screen-handling code of the test program.
- To get the padding for insert line right (if the terminal
+ To get the padding for insert line right (if the terminal
manufacturer did not document it) a severe test is to edit
- a large file at 9600 baud, delete 16 or so lines from the
- middle of the screen, then hit the `u' key several times
- quickly. If the terminal messes up, more padding is usu-
- ally needed. A similar test can be used for insert char-
+ a large file at 9600 baud, delete 16 or so lines from the
+ middle of the screen, then hit the `u' key several times
+ quickly. If the terminal messes up, more padding is usu-
+ ally needed. A similar test can be used for insert char-
acter.
- <B>Basic</B> <B>Capabilities</B>
- The number of columns on each line for the terminal is
- given by the <B>cols</B> numeric capability. If the terminal is
- a CRT, then the number of lines on the screen is given by
- the <B>lines</B> capability. If the terminal wraps around to the
- beginning of the next line when it reaches the right
- margin, then it should have the <B>am</B> capability. If the
- terminal can clear its screen, leaving the cursor in the
- home position, then this is given by the <B>clear</B> string
- capability. If the terminal overstrikes (rather than
- clearing a position when a character is struck over) then
- it should have the <B>os</B> capability. If the terminal is a
- printing terminal, with no soft copy unit, give it both <B>hc</B>
- and <B>os</B>. (<B>os</B> applies to storage scope terminals, such as
+ <STRONG>Basic</STRONG> <STRONG>Capabilities</STRONG>
+ The number of columns on each line for the terminal is
+ given by the <STRONG>cols</STRONG> numeric capability. If the terminal is
+ a CRT, then the number of lines on the screen is given by
+ the <STRONG>lines</STRONG> capability. If the terminal wraps around to the
+ beginning of the next line when it reaches the right mar-
+ gin, then it should have the <STRONG>am</STRONG> capability. If the termi-
+ nal can clear its screen, leaving the cursor in the home
+ position, then this is given by the <STRONG>clear</STRONG> string
+ capability. If the terminal overstrikes (rather than
+ clearing a position when a character is struck over) then
+ it should have the <STRONG>os</STRONG> capability. If the terminal is a
+ printing terminal, with no soft copy unit, give it both <STRONG>hc</STRONG>
+ and <STRONG>os</STRONG>. (<STRONG>os</STRONG> applies to storage scope terminals, such as
TEKTRONIX 4010 series, as well as hard copy and APL termi-
- nals.) If there is a code to move the cursor to the left
- edge of the current row, give this as <B>cr</B>. (Normally this
- will be carriage return, control M.) If there is a code
- to produce an audible signal (bell, beep, etc) give this
- as <B>bel</B>.
-
- If there is a code to move the cursor one position to the
- left (such as backspace) that capability should be given
- as <B>cub1</B>. Similarly, codes to move to the right, up, and
- down should be given as <B>cuf1</B>, <B>cuu1</B>, and <B>cud1</B>. These local
- cursor motions should not alter the text they pass over,
- for example, you would not normally use `<B>cuf1</B>= ' because
+ nals.) If there is a code to move the cursor to the left
+ edge of the current row, give this as <STRONG>cr</STRONG>. (Normally this
+ will be carriage return, control M.) If there is a code
+ to produce an audible signal (bell, beep, etc) give this
+ as <STRONG>bel</STRONG>.
+
+ If there is a code to move the cursor one position to the
+ left (such as backspace) that capability should be given
+ as <STRONG>cub1</STRONG>. Similarly, codes to move to the right, up, and
+ down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and <STRONG>cud1</STRONG>. These local
+ cursor motions should not alter the text they pass over,
+ for example, you would not normally use `<STRONG>cuf1</STRONG>= ' because
the space would erase the character moved over.
- A very important point here is that the local cursor
- motions encoded in <I>terminfo</I> are undefined at the left and
- top edges of a CRT terminal. Programs should never
- attempt to backspace around the left edge, unless <B>bw</B> is
+ A very important point here is that the local cursor
+ motions encoded in <EM>terminfo</EM> are undefined at the left and
+ top edges of a CRT terminal. Programs should never
+ attempt to backspace around the left edge, unless <STRONG>bw</STRONG> is
given, and never attempt to go up locally off the top. In
- order to scroll text up, a program will go to the bottom
- left corner of the screen and send the <B>ind</B> (index) string.
+ order to scroll text up, a program will go to the bottom
+ left corner of the screen and send the <STRONG>ind</STRONG> (index) string.
To scroll text down, a program goes to the top left corner
- of the screen and sends the <B>ri</B> (reverse index) string.
- The strings <B>ind</B> and <B>ri</B> are undefined when not on their
+ of the screen and sends the <STRONG>ri</STRONG> (reverse index) string.
+ The strings <STRONG>ind</STRONG> and <STRONG>ri</STRONG> are undefined when not on their
respective corners of the screen.
- Parameterized versions of the scrolling sequences are <B>indn</B>
- and <B>rin</B> which have the same semantics as <B>ind</B> and <B>ri</B> except
- that they take one parameter, and scroll that many lines.
- They are also undefined except at the appropriate edge of
+ Parameterized versions of the scrolling sequences are <STRONG>indn</STRONG>
+ and <STRONG>rin</STRONG> which have the same semantics as <STRONG>ind</STRONG> and <STRONG>ri</STRONG> except
+ that they take one parameter, and scroll that many lines.
+ They are also undefined except at the appropriate edge of
the screen.
- The <B>am</B> capability tells whether the cursor sticks at the
- right edge of the screen when text is output, but this
- does not necessarily apply to a <B>cuf1</B> from the last column.
- The only local motion which is defined from the left edge
- is if <B>bw</B> is given, then a <B>cub1</B> from the left edge will
- move to the right edge of the previous row. If <B>bw</B> is not
- given, the effect is undefined. This is useful for draw-
- ing a box around the edge of the screen, for example. If
- the terminal has switch selectable automatic margins, the
- <I>terminfo</I> file usually assumes that this is on; i.e., <B>am</B>.
- If the terminal has a command which moves to the first
- column of the next line, that command can be given as <B>nel</B>
- (newline). It does not matter if the command clears the
- remainder of the current line, so if the terminal has no
- <B>cr</B> and <B>lf</B> it may still be possible to craft a working <B>nel</B>
+ The <STRONG>am</STRONG> capability tells whether the cursor sticks at the
+ right edge of the screen when text is output, but this
+ does not necessarily apply to a <STRONG>cuf1</STRONG> from the last column.
+ The only local motion which is defined from the left edge
+ is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from the left edge will
+ move to the right edge of the previous row. If <STRONG>bw</STRONG> is not
+ given, the effect is undefined. This is useful for draw-
+ ing a box around the edge of the screen, for example. If
+ the terminal has switch selectable automatic margins, the
+ <EM>terminfo</EM> file usually assumes that this is on; i.e., <STRONG>am</STRONG>.
+ If the terminal has a command which moves to the first
+ column of the next line, that command can be given as <STRONG>nel</STRONG>
+ (newline). It does not matter if the command clears the
+ remainder of the current line, so if the terminal has no
+ <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be possible to craft a working <STRONG>nel</STRONG>
out of one or both of them.
These capabilities suffice to describe hard-copy and
- "glass-tty" terminals. Thus the model 33 teletype is
+ "glass-tty" terminals. Thus the model 33 teletype is
described as
33|tty33|tty|model 33 teletype,
ind=^J, lines#24,
- <B>Parameterized</B> <B>Strings</B>
- Cursor addressing and other strings requiring parameters
- in the terminal are described by a parameterized string
- capability, with <B><A HREF="printf.3S.html">printf(3S)</A></B> like escapes <B>%x</B> in it. For
- example, to address the cursor, the <B>cup</B> capability is
+ <STRONG>Parameterized</STRONG> <STRONG>Strings</STRONG>
+ Cursor addressing and other strings requiring parameters
+ in the terminal are described by a parameterized string
+ capability, with <STRONG><A HREF="printf.3S.html">printf(3S)</A></STRONG> like escapes <STRONG>%x</STRONG> in it. For
+ example, to address the cursor, the <STRONG>cup</STRONG> capability is
given, using two parameters: the row and column to address
to. (Rows and columns are numbered from zero and refer to
the physical screen visible to the user, not to any unseen
- memory.) If the terminal has memory relative cursor
- addressing, that can be indicated by <B>mrcup</B>.
+ memory.) If the terminal has memory relative cursor
+ addressing, that can be indicated by <STRONG>mrcup</STRONG>.
- The parameter mechanism uses a stack and special <B>%</B> codes
- to manipulate it. Typically a sequence will push one of
- the parameters onto the stack and then print it in some
+ The parameter mechanism uses a stack and special <STRONG>%</STRONG> codes
+ to manipulate it. Typically a sequence will push one of
+ the parameters onto the stack and then print it in some
format. Often more complex operations are necessary.
- The <B>%</B> encodings have the following meanings:
+ The <STRONG>%</STRONG> encodings have the following meanings:
%% outputs `%'
- %<I>[[</I>:<I>]flags][width[.precision]][</I>doxXs<I>]</I>
- as in <B>printf</B>, flags are [-+#] and space
+ %<EM>[[</EM>:<EM>]flags][width[.precision]][</EM>doxXs<EM>]</EM>
+ as in <STRONG>printf</STRONG>, flags are [-+#] and space
%c print pop() like %c in printf()
%s print pop() like %s in printf()
- %p[1-9] push <I>i</I>'th parm
+ %p[1-9] push <EM>i</EM>'th parm
%P[a-z] set dynamic variable [a-z] to pop()
%g[a-z] get dynamic variable [a-z] and push it
%P[A-Z] set static variable [a-z] to pop()
%g[A-Z] get static variable [a-z] and push it
- %'<I>c</I>' char constant <I>c</I>
- %{<I>nn</I>} integer constant <I>nn</I>
+ %'<EM>c</EM>' char constant <EM>c</EM>
+ %{<EM>nn</EM>} integer constant <EM>nn</EM>
%l push strlen(pop)
%+ %- %* %/ %m
arithmetic (%m is mod): push(pop() op pop())
-
%& %| %^ bit operations: push(pop() op pop())
%= %> %< logical operations: push(pop() op pop())
%A, %O logical and & or operations (for conditionals)
ci are conditions, bi are bodies.
Binary operations are in postfix form with the operands in
- the usual order. That is, to get x-5 one would use
- "%gx%{5}%-". %P and %g variables are persistent across
+ the usual order. That is, to get x-5 one would use
+ "%gx%{5}%-". %P and %g variables are persistent across
escape-string evaluations.
Consider the HP2645, which, to get to row 3 and column 12,
- needs to be sent \E&a12c03Y padded for 6 milliseconds.
- Note that the order of the rows and columns is inverted
- here, and that the row and column are printed as two dig-
- its. Thus its <B>cup</B> capability is "cup=6\E&%p2%2dc%p1%2dY".
+ needs to be sent \E&a12c03Y padded for 6 milliseconds.
+ Note that the order of the rows and columns is inverted
+ here, and that the row and column are printed as two dig-
+ its. Thus its <STRONG>cup</STRONG> capability is "cup=6\E&%p2%2dc%p1%2dY".
The Microterm ACT-IV needs the current row and column sent
- preceded by a <B>^T</B>, with the row and column simply encoded
- in binary, "cup=^T%p1%c%p2%c". Terminals which use "%c"
- need to be able to backspace the cursor (<B>cub1</B>), and to
- move the cursor up one line on the screen (<B>cuu1</B>). This is
- necessary because it is not always safe to transmit <B>\n</B> <B>^D</B>
- and <B>\r</B>, as the system may change or discard them. (The
- library routines dealing with terminfo set tty modes so
+ preceded by a <STRONG>^T</STRONG>, with the row and column simply encoded
+ in binary, "cup=^T%p1%c%p2%c". Terminals which use "%c"
+ need to be able to backspace the cursor (<STRONG>cub1</STRONG>), and to
+ move the cursor up one line on the screen (<STRONG>cuu1</STRONG>). This is
+ necessary because it is not always safe to transmit <STRONG>\n</STRONG> <STRONG>^D</STRONG>
+ and <STRONG>\r</STRONG>, as the system may change or discard them. (The
+ library routines dealing with terminfo set tty modes so
that tabs are never expanded, so \t is safe to send. This
turns out to be essential for the Ann Arbor 4080.)
A final example is the LSI ADM-3a, which uses row and col-
umn offset by a blank character, thus "cup=\E=%p1%'
- '%+%c%p2%' '%+%c". After sending `\E=', this pushes the
- first parameter, pushes the ASCII value for a space (32),
- adds them (pushing the sum on the stack in place of the
- two previous values) and outputs that value as a charac-
- ter. Then the same is done for the second parameter.
+ '%+%c%p2%' '%+%c". After sending `\E=', this pushes the
+ first parameter, pushes the ASCII value for a space (32),
+ adds them (pushing the sum on the stack in place of the
+ two previous values) and outputs that value as a charac-
+ ter. Then the same is done for the second parameter.
More complex arithmetic is possible using the stack.
- <B>Cursor</B> <B>Motions</B>
+ <STRONG>Cursor</STRONG> <STRONG>Motions</STRONG>
If the terminal has a fast way to home the cursor (to very
- upper left corner of screen) then this can be given as
- <B>home</B>; similarly a fast way of getting to the lower left-
- hand corner can be given as <B>ll</B>; this may involve going up
- with <B>cuu1</B> from the home position, but a program should
- never do this itself (unless <B>ll</B> does) because it can make
- no assumption about the effect of moving up from the home
- position. Note that the home position is the same as
+ upper left corner of screen) then this can be given as
+ <STRONG>home</STRONG>; similarly a fast way of getting to the lower left-
+ hand corner can be given as <STRONG>ll</STRONG>; this may involve going up
+ with <STRONG>cuu1</STRONG> from the home position, but a program should
+ never do this itself (unless <STRONG>ll</STRONG> does) because it can make
+ no assumption about the effect of moving up from the home
+ position. Note that the home position is the same as
addressing to (0,0): to the top left corner of the screen,
- not of memory. (Thus, the \EH sequence on HP terminals
- cannot be used for <B>home</B>.)
+ not of memory. (Thus, the \EH sequence on HP terminals
+ cannot be used for <STRONG>home</STRONG>.)
If the terminal has row or column absolute cursor address-
- ing, these can be given as single parameter capabilities
- <B>hpa</B> (horizontal position absolute) and <B>vpa</B> (vertical posi-
+ ing, these can be given as single parameter capabilities
+ <STRONG>hpa</STRONG> (horizontal position absolute) and <STRONG>vpa</STRONG> (vertical posi-
tion absolute). Sometimes these are shorter than the more
- general two parameter sequence (as with the hp2645) and
- can be used in preference to <B>cup</B>. If there are parameter-
- ized local motions (e.g., move <I>n</I> spaces to the right)
- these can be given as <B>cud</B>, <B>cub</B>, <B>cuf</B>, and <B>cuu</B> with a single
- parameter indicating how many spaces to move. These are
- primarily useful if the terminal does not have <B>cup</B>, such
+ general two parameter sequence (as with the hp2645) and
+ can be used in preference to <STRONG>cup</STRONG>. If there are parameter-
+ ized local motions (e.g., move <EM>n</EM> spaces to the right)
+ these can be given as <STRONG>cud</STRONG>, <STRONG>cub</STRONG>, <STRONG>cuf</STRONG>, and <STRONG>cuu</STRONG> with a single
+ parameter indicating how many spaces to move. These are
+ primarily useful if the terminal does not have <STRONG>cup</STRONG>, such
as the TEKTRONIX 4025.
If the terminal needs to be in a special mode when running
a program that uses these capabilities, the codes to enter
- and exit this mode can be given as <B>smcup</B> and <B>rmcup</B>. This
- arises, for example, from terminals like the Concept with
- more than one page of memory. If the terminal has only
- memory relative cursor addressing and not screen relative
+ and exit this mode can be given as <STRONG>smcup</STRONG> and <STRONG>rmcup</STRONG>. This
+ arises, for example, from terminals like the Concept with
+ more than one page of memory. If the terminal has only
+ memory relative cursor addressing and not screen relative
cursor addressing, a one screen-sized window must be fixed
- into the terminal for cursor addressing to work properly.
- This is also used for the TEKTRONIX 4025, where <B>smcup</B> sets
- the command character to be the one used by terminfo. If
- the <B>smcup</B> sequence will not restore the screen after an
- <B>rmcup</B> sequence is output (to the state prior to outputting
- <B>rmcup</B>), specify <B>nrrmc</B>.
+ into the terminal for cursor addressing to work properly.
+ This is also used for the TEKTRONIX 4025, where <STRONG>smcup</STRONG> sets
+ the command character to be the one used by terminfo. If
+ the <STRONG>smcup</STRONG> sequence will not restore the screen after an
+ <STRONG>rmcup</STRONG> sequence is output (to the state prior to outputting
+ <STRONG>rmcup</STRONG>), specify <STRONG>nrrmc</STRONG>.
- <B>Area</B> <B>Clears</B>
+ <STRONG>Area</STRONG> <STRONG>Clears</STRONG>
If the terminal can clear from the current position to the
- end of the line, leaving the cursor where it is, this
- should be given as <B>el</B>. If the terminal can clear from the
- beginning of the line to the current position inclusive,
- leaving the cursor where it is, this should be given as
- <B>el1</B>. If the terminal can clear from the current position
- to the end of the display, then this should be given as
- <B>ed</B>. <B>Ed</B> is only defined from the first column of a line.
- (Thus, it can be simulated by a request to delete a large
- number of lines, if a true <B>ed</B> is not available.)
-
-
- <B>Insert/delete</B> <B>line</B> <B>and</B> <B>vertical</B> <B>motions</B>
- If the terminal can open a new blank line before the line
- where the cursor is, this should be given as <B>il1</B>; this is
- done only from the first position of a line. The cursor
+ end of the line, leaving the cursor where it is, this
+ should be given as <STRONG>el</STRONG>. If the terminal can clear from the
+ beginning of the line to the current position inclusive,
+ leaving the cursor where it is, this should be given as
+ <STRONG>el1</STRONG>. If the terminal can clear from the current position
+ to the end of the display, then this should be given as
+ <STRONG>ed</STRONG>. <STRONG>Ed</STRONG> is only defined from the first column of a line.
+ (Thus, it can be simulated by a request to delete a large
+ number of lines, if a true <STRONG>ed</STRONG> is not available.)
+
+
+ <STRONG>Insert/delete</STRONG> <STRONG>line</STRONG> <STRONG>and</STRONG> <STRONG>vertical</STRONG> <STRONG>motions</STRONG>
+ If the terminal can open a new blank line before the line
+ where the cursor is, this should be given as <STRONG>il1</STRONG>; this is
+ done only from the first position of a line. The cursor
must then appear on the newly blank line. If the terminal
- can delete the line which the cursor is on, then this
- should be given as <B>dl1</B>; this is done only from the first
- position on the line to be deleted. Versions of <B>il1</B> and
- <B>dl1</B> which take a single parameter and insert or delete
- that many lines can be given as <B>il</B> and <B>dl</B>.
-
- If the terminal has a settable scrolling region (like the
- vt100) the command to set this can be described with the
- <B>csr</B> capability, which takes two parameters: the top and
+ can delete the line which the cursor is on, then this
+ should be given as <STRONG>dl1</STRONG>; this is done only from the first
+ position on the line to be deleted. Versions of <STRONG>il1</STRONG> and
+ <STRONG>dl1</STRONG> which take a single parameter and insert or delete
+ that many lines can be given as <STRONG>il</STRONG> and <STRONG>dl</STRONG>.
+
+ If the terminal has a settable scrolling region (like the
+ vt100) the command to set this can be described with the
+ <STRONG>csr</STRONG> capability, which takes two parameters: the top and
bottom lines of the scrolling region. The cursor position
is, alas, undefined after using this command.
- It is possible to get the effect of insert or delete line
- using <B>csr</B> on a properly chosen region; the <B>sc</B> and <B>rc</B> (save
- and restore cursor) commands may be useful for ensuring
- that your synthesized insert/delete string does not move
- the cursor. (Note that the <B><A HREF="ncurses.3x.html">ncurses(3x)</A></B> library does this
- synthesis automatically, so you need not compose
- insert/delete strings for an entry with <B>csr</B>).
+ It is possible to get the effect of insert or delete line
+ using <STRONG>csr</STRONG> on a properly chosen region; the <STRONG>sc</STRONG> and <STRONG>rc</STRONG> (save
+ and restore cursor) commands may be useful for ensuring
+ that your synthesized insert/delete string does not move
+ the cursor. (Note that the <STRONG><A HREF="ncurses.3x.html">ncurses(3x)</A></STRONG> library does this
+ synthesis automatically, so you need not compose
+ insert/delete strings for an entry with <STRONG>csr</STRONG>).
Yet another way to construct insert and delete might be to
- use a combination of index with the memory-lock feature
- found on some terminals (like the HP-700/90 series, which
+ use a combination of index with the memory-lock feature
+ found on some terminals (like the HP-700/90 series, which
however also has insert/delete).
- Inserting lines at the top or bottom of the screen can
- also be done using <B>ri</B> or <B>ind</B> on many terminals without a
- true insert/delete line, and is often faster even on ter-
+ Inserting lines at the top or bottom of the screen can
+ also be done using <STRONG>ri</STRONG> or <STRONG>ind</STRONG> on many terminals without a
+ true insert/delete line, and is often faster even on ter-
minals with those features.
- The boolean <B>non_dest_scroll_region</B> should be set if each
- scrolling window is effectively a view port on a screen-
- sized canvas. To test for this capability, create a
- scrolling region in the middle of the screen, write some-
- thing to the bottom line, move the cursor to the top of
- the region, and do <B>ri</B> followed by <B>dl1</B> or <B>ind</B>. If the data
- scrolled off the bottom of the region by the <B>ri</B> re-
- appears, then scrolling is non-destructive. System V and
- XSI Curses expect that <B>ind</B>, <B>ri</B>, <B>indn</B>, and <B>rin</B> will simu-
- late destructive scrolling; their documentation cautions
- you not to define <B>csr</B> unless this is true. This <B>curses</B>
+ The boolean <STRONG>non_dest_scroll_region</STRONG> should be set if each
+ scrolling window is effectively a view port on a screen-
+ sized canvas. To test for this capability, create a
+ scrolling region in the middle of the screen, write some-
+ thing to the bottom line, move the cursor to the top of
+ the region, and do <STRONG>ri</STRONG> followed by <STRONG>dl1</STRONG> or <STRONG>ind</STRONG>. If the data
+ scrolled off the bottom of the region by the <STRONG>ri</STRONG> re-
+ appears, then scrolling is non-destructive. System V and
+ XSI Curses expect that <STRONG>ind</STRONG>, <STRONG>ri</STRONG>, <STRONG>indn</STRONG>, and <STRONG>rin</STRONG> will simu-
+ late destructive scrolling; their documentation cautions
+ you not to define <STRONG>csr</STRONG> unless this is true. This <STRONG>curses</STRONG>
implementation is more liberal and will do explicit erases
- after scrolling if <B>ndstr</B> is defined.
+ after scrolling if <STRONG>ndstr</STRONG> is defined.
If the terminal has the ability to define a window as part
- of memory, which all commands affect, it should be given
- as the parameterized string <B>wind</B>. The four parameters are
- the starting and ending lines in memory and the starting
+ of memory, which all commands affect, it should be given
+ as the parameterized string <STRONG>wind</STRONG>. The four parameters are
+ the starting and ending lines in memory and the starting
and ending columns in memory, in that order.
- If the terminal can retain display memory above, then the
- <B>da</B> capability should be given; if display memory can be
- retained below, then <B>db</B> should be given. These indicate
- that deleting a line or scrolling may bring non-blank
- lines up from below or that scrolling back with <B>ri</B> may
+ If the terminal can retain display memory above, then the
+ <STRONG>da</STRONG> capability should be given; if display memory can be
+ retained below, then <STRONG>db</STRONG> should be given. These indicate
+ that deleting a line or scrolling may bring non-blank
+ lines up from below or that scrolling back with <STRONG>ri</STRONG> may
bring down non-blank lines.
- <B>Insert/Delete</B> <B>Character</B>
- There are two basic kinds of intelligent terminals with
- respect to insert/delete character which can be described
- using <I>terminfo.</I> The most common insert/delete character
- operations affect only the characters on the current line
- and shift characters off the end of the line rigidly.
- Other terminals, such as the Concept 100 and the Perkin
- Elmer Owl, make a distinction between typed and untyped
- blanks on the screen, shifting upon an insert or delete
- only to an untyped blank on the screen which is either
- eliminated, or expanded to two untyped blanks. You can
- determine the kind of terminal you have by clearing the
- screen and then typing text separated by cursor motions.
- Type "abc def" using local cursor motions (not spaces)
+ <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
+ There are two basic kinds of intelligent terminals with
+ respect to insert/delete character which can be described
+ using <EM>terminfo.</EM> The most common insert/delete character
+ operations affect only the characters on the current line
+ and shift characters off the end of the line rigidly.
+ Other terminals, such as the Concept 100 and the Perkin
+ Elmer Owl, make a distinction between typed and untyped
+ blanks on the screen, shifting upon an insert or delete
+ only to an untyped blank on the screen which is either
+ eliminated, or expanded to two untyped blanks. You can
+ determine the kind of terminal you have by clearing the
+ screen and then typing text separated by cursor motions.
+ Type "abc def" using local cursor motions (not spaces)
between the "abc" and the "def". Then position the cursor
- before the "abc" and put the terminal in insert mode. If
- typing characters causes the rest of the line to shift
+ before the "abc" and put the terminal in insert mode. If
+ typing characters causes the rest of the line to shift
rigidly and characters to fall off the end, then your ter-
- minal does not distinguish between blanks and untyped
- positions. If the "abc" shifts over to the "def" which
- then move together around the end of the current line and
- onto the next as you insert, you have the second type of
- terminal, and should give the capability <B>in</B>, which stands
+ minal does not distinguish between blanks and untyped
+ positions. If the "abc" shifts over to the "def" which
+ then move together around the end of the current line and
+ onto the next as you insert, you have the second type of
+ terminal, and should give the capability <STRONG>in</STRONG>, which stands
for "insert null". While these are two logically separate
- attributes (one line vs. multi-line insert mode, and spe-
- cial treatment of untyped spaces) we have seen no termi-
- nals whose insert mode cannot be described with the single
- attribute.
+ attributes (one line versus multi-line insert mode, and
+ special treatment of untyped spaces) we have seen no ter-
+ minals whose insert mode cannot be described with the sin-
+ gle attribute.
- Terminfo can describe both terminals which have an insert
+ Terminfo can describe both terminals which have an insert
mode, and terminals which send a simple sequence to open a
- blank position on the current line. Give as <B>smir</B> the
- sequence to get into insert mode. Give as <B>rmir</B> the
- sequence to leave insert mode. Now give as <B>ich1</B> any
+ blank position on the current line. Give as <STRONG>smir</STRONG> the
+ sequence to get into insert mode. Give as <STRONG>rmir</STRONG> the
+ sequence to leave insert mode. Now give as <STRONG>ich1</STRONG> any
sequence needed to be sent just before sending the charac-
- ter to be inserted. Most terminals with a true insert
- mode will not give <B>ich1</B>; terminals which send a sequence
+ ter to be inserted. Most terminals with a true insert
+ mode will not give <STRONG>ich1</STRONG>; terminals which send a sequence
to open a screen position should give it here.
- If your terminal has both, insert mode is usually prefer-
- able to <B>ich1</B>. Technically, you should not give both
- unless the terminal actually requires both to be used in
- combination. Accordingly, some non-curses applications
- get confused if both are present; the symptom is doubled
+ If your terminal has both, insert mode is usually prefer-
+ able to <STRONG>ich1</STRONG>. Technically, you should not give both
+ unless the terminal actually requires both to be used in
+ combination. Accordingly, some non-curses applications
+ get confused if both are present; the symptom is doubled
characters in an update using insert. This requirement is
- now rare; most <B>ich</B> sequences do not require previous smir,
- and most smir insert modes do not require <B>ich1</B> before each
- character. Therefore, the new <B>curses</B> actually assumes
- this is the case and uses either <B>rmir</B>/<B>smir</B> or <B>ich</B>/<B>ich1</B> as
+ now rare; most <STRONG>ich</STRONG> sequences do not require previous smir,
+ and most smir insert modes do not require <STRONG>ich1</STRONG> before each
+ character. Therefore, the new <STRONG>curses</STRONG> actually assumes
+ this is the case and uses either <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> or <STRONG>ich</STRONG>/<STRONG>ich1</STRONG> as
appropriate (but not both). If you have to write an entry
- to be used under new curses for a terminal old enough to
- need both, include the <B>rmir</B>/<B>smir</B> sequences in <B>ich1</B>.
+ to be used under new curses for a terminal old enough to
+ need both, include the <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> sequences in <STRONG>ich1</STRONG>.
If post insert padding is needed, give this as a number of
- milliseconds in <B>ip</B> (a string option). Any other sequence
- which may need to be sent after an insert of a single
- character may also be given in <B>ip</B>. If your terminal needs
+ milliseconds in <STRONG>ip</STRONG> (a string option). Any other sequence
+ which may need to be sent after an insert of a single
+ character may also be given in <STRONG>ip</STRONG>. If your terminal needs
both to be placed into an `insert mode' and a special code
- to precede each inserted character, then both <B>smir</B>/<B>rmir</B>
- and <B>ich1</B> can be given, and both will be used. The <B>ich</B>
- capability, with one parameter, <I>n</I>, will repeat the effects
- of <B>ich1</B> <I>n</I> times.
+ to precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG>
+ and <STRONG>ich1</STRONG> can be given, and both will be used. The <STRONG>ich</STRONG>
+ capability, with one parameter, <EM>n</EM>, will repeat the effects
+ of <STRONG>ich1</STRONG> <EM>n</EM> times.
If padding is necessary between characters typed while not
- in insert mode, give this as a number of milliseconds
- padding in <B>rmp</B>.
-
- It is occasionally necessary to move around while in
- insert mode to delete characters on the same line (e.g.,
- if there is a tab after the insertion position). If your
- terminal allows motion while in insert mode you can give
- the capability <B>mir</B> to speed up inserting in this case.
- Omitting <B>mir</B> will affect only speed. Some terminals
- (notably Datamedia's) must not have <B>mir</B> because of the way
+ in insert mode, give this as a number of milliseconds
+ padding in <STRONG>rmp</STRONG>.
+
+ It is occasionally necessary to move around while in
+ insert mode to delete characters on the same line (e.g.,
+ if there is a tab after the insertion position). If your
+ terminal allows motion while in insert mode you can give
+ the capability <STRONG>mir</STRONG> to speed up inserting in this case.
+ Omitting <STRONG>mir</STRONG> will affect only speed. Some terminals
+ (notably Datamedia's) must not have <STRONG>mir</STRONG> because of the way
their insert mode works.
- Finally, you can specify <B>dch1</B> to delete a single charac-
- ter, <B>dch</B> with one parameter, <I>n</I>, to delete <I>n</I> <I>characters,</I>
- and delete mode by giving <B>smdc</B> and <B>rmdc</B> to enter and exit
- delete mode (any mode the terminal needs to be placed in
- for <B>dch1</B> to work).
+ Finally, you can specify <STRONG>dch1</STRONG> to delete a single charac-
+ ter, <STRONG>dch</STRONG> with one parameter, <EM>n</EM>, to delete <EM>n</EM> <EM>characters,</EM>
+ and delete mode by giving <STRONG>smdc</STRONG> and <STRONG>rmdc</STRONG> to enter and exit
+ delete mode (any mode the terminal needs to be placed in
+ for <STRONG>dch1</STRONG> to work).
- A command to erase <I>n</I> characters (equivalent to outputting
- <I>n</I> blanks without moving the cursor) can be given as <B>ech</B>
+ A command to erase <EM>n</EM> characters (equivalent to outputting
+ <EM>n</EM> blanks without moving the cursor) can be given as <STRONG>ech</STRONG>
with one parameter.
- <B>Highlighting,</B> <B>Underlining,</B> <B>and</B> <B>Visible</B> <B>Bells</B>
+ <STRONG>Highlighting,</STRONG> <STRONG>Underlining,</STRONG> <STRONG>and</STRONG> <STRONG>Visible</STRONG> <STRONG>Bells</STRONG>
If your terminal has one or more kinds of display
- attributes, these can be represented in a number of dif-
- ferent ways. You should choose one display form as <I>stand-</I>
- <I>out</I> <I>mode</I>, representing a good, high contrast, easy-on-the-
- eyes, format for highlighting error messages and other
- attention getters. (If you have a choice, reverse video
- plus half-bright is good, or reverse video alone.) The
- sequences to enter and exit standout mode are given as
- <B>smso</B> and <B>rmso</B>, respectively. If the code to change into
- or out of standout mode leaves one or even two blank
- spaces on the screen, as the TVI 912 and Teleray 1061 do,
- then <B>xmc</B> should be given to tell how many spaces are left.
-
- Codes to begin underlining and end underlining can be
- given as <B>smul</B> and <B>rmul</B> respectively. If the terminal has
- a code to underline the current character and move the
+ attributes, these can be represented in a number of dif-
+ ferent ways. You should choose one display form as <EM>stand-</EM>
+ <EM>out</EM> <EM>mode</EM>, representing a good, high contrast, easy-on-the-
+ eyes, format for highlighting error messages and other
+ attention getters. (If you have a choice, reverse video
+ plus half-bright is good, or reverse video alone.) The
+ sequences to enter and exit standout mode are given as
+ <STRONG>smso</STRONG> and <STRONG>rmso</STRONG>, respectively. If the code to change into
+ or out of standout mode leaves one or even two blank
+ spaces on the screen, as the TVI 912 and Teleray 1061 do,
+ then <STRONG>xmc</STRONG> should be given to tell how many spaces are left.
+
+ Codes to begin underlining and end underlining can be
+ given as <STRONG>smul</STRONG> and <STRONG>rmul</STRONG> respectively. If the terminal has
+ a code to underline the current character and move the
cursor one space to the right, such as the Microterm Mime,
- this can be given as <B>uc</B>.
-
- Other capabilities to enter various highlighting modes
- include <B>blink</B> (blinking) <B>bold</B> (bold or extra bright) <B>dim</B>
- (dim or half-bright) <B>invis</B> (blanking or invisible text)
- <B>prot</B> (protected) <B>rev</B> (reverse video) <B>sgr0</B> (turn off <I>all</I>
- attribute modes) <B>smacs</B> (enter alternate character set
- mode) and <B>rmacs</B> (exit alternate character set mode).
- Turning on any of these modes singly may or may not turn
+ this can be given as <STRONG>uc</STRONG>.
+
+ Other capabilities to enter various highlighting modes
+ include <STRONG>blink</STRONG> (blinking) <STRONG>bold</STRONG> (bold or extra bright) <STRONG>dim</STRONG>
+ (dim or half-bright) <STRONG>invis</STRONG> (blanking or invisible text)
+ <STRONG>prot</STRONG> (protected) <STRONG>rev</STRONG> (reverse video) <STRONG>sgr0</STRONG> (turn off <EM>all</EM>
+ attribute modes) <STRONG>smacs</STRONG> (enter alternate character set
+ mode) and <STRONG>rmacs</STRONG> (exit alternate character set mode).
+ Turning on any of these modes singly may or may not turn
off other modes.
- If there is a sequence to set arbitrary combinations of
- modes, this should be given as <B>sgr</B> (set attributes), tak-
- ing 9 parameters. Each parameter is either 0 or nonzero,
+ If there is a sequence to set arbitrary combinations of
+ modes, this should be given as <STRONG>sgr</STRONG> (set attributes), tak-
+ ing 9 parameters. Each parameter is either 0 or nonzero,
as the corresponding attribute is on or off. The 9 param-
- eters are, in order: standout, underline, reverse, blink,
- dim, bold, blank, protect, alternate character set. Not
- all modes need be supported by <B>sgr</B>, only those for which
+ eters are, in order: standout, underline, reverse, blink,
+ dim, bold, blank, protect, alternate character set. Not
+ all modes need be supported by <STRONG>sgr</STRONG>, only those for which
corresponding separate attribute commands exist.
For example, the DEC vt220 supports most of the modes:
- <B>tparm</B> <B>parameter</B> <B>attribute</B> <B>escape</B> <B>sequence</B>
+ <STRONG>tparm</STRONG> <STRONG>parameter</STRONG> <STRONG>attribute</STRONG> <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
none none \E[0m
p1 standout \E[0;1;7m
p8 protect not used
p9 altcharset ^O (off) ^N (on)
- We begin each escape sequence by turning off any existing
- modes, since there is no quick way to determine whether
+ We begin each escape sequence by turning off any existing
+ modes, since there is no quick way to determine whether
they are active. Standout is set up to be the combination
- of reverse and bold. The vt220 terminal has a protect
- mode, though it is not commonly used in sgr because it
- protects characters on the screen from the host's era-
- sures. The altcharset mode also is different in that it
- is either ^O or ^N, depending on whether it is off or on.
- If all modes are turned on, the resulting sequence is
+ of reverse and bold. The vt220 terminal has a protect
+ mode, though it is not commonly used in sgr because it
+ protects characters on the screen from the host's era-
+ sures. The altcharset mode also is different in that it
+ is either ^O or ^N, depending on whether it is off or on.
+ If all modes are turned on, the resulting sequence is
\E[0;1;4;5;7;8m^N.
- Some sequences are common to different modes. For exam-
- ple, ;7 is output when either p1 or p3 is true, that is,
+ Some sequences are common to different modes. For exam-
+ ple, ;7 is output when either p1 or p3 is true, that is,
if either standout or reverse modes are turned on.
- Writing out the above sequences, along with their depen-
+ Writing out the above sequences, along with their depen-
dencies yields
- <B>sequence</B> <B>when</B> <B>to</B> <B>output</B> <B>terminfo</B> <B>translation</B>
+ <STRONG>sequence</STRONG> <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG> <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
\E[0 always \E[0
;1 if p1 or p6 %?%p1%p6%|%t;1%;
;4 if p2 %?%p2%|%t;4%;
-
;5 if p4 %?%p4%|%t;5%;
;7 if p1 or p3 %?%p1%p3%|%t;7%;
;8 if p7 %?%p7%|%t;8%;
+
m always m
^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;
%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- Remember that if you specify sgr, you must also specify
+ Remember that if you specify sgr, you must also specify
sgr0.
- Terminals with the ``magic cookie'' glitch (<B>xmc</B>) deposit
- special ``cookies'' when they receive mode-setting
- sequences, which affect the display algorithm rather than
- having extra bits for each character. Some terminals,
- such as the HP 2621, automatically leave standout mode
- when they move to a new line or the cursor is addressed.
- Programs using standout mode should exit standout mode
- before moving the cursor or sending a newline, unless the
- <B>msgr</B> capability, asserting that it is safe to move in
+ Terminals with the ``magic cookie'' glitch (<STRONG>xmc</STRONG>) deposit
+ special ``cookies'' when they receive mode-setting
+ sequences, which affect the display algorithm rather than
+ having extra bits for each character. Some terminals,
+ such as the HP 2621, automatically leave standout mode
+ when they move to a new line or the cursor is addressed.
+ Programs using standout mode should exit standout mode
+ before moving the cursor or sending a newline, unless the
+ <STRONG>msgr</STRONG> capability, asserting that it is safe to move in
standout mode, is present.
- If the terminal has a way of flashing the screen to indi-
- cate an error quietly (a bell replacement) then this can
- be given as <B>flash</B>; it must not move the cursor.
+ If the terminal has a way of flashing the screen to indi-
+ cate an error quietly (a bell replacement) then this can
+ be given as <STRONG>flash</STRONG>; it must not move the cursor.
- If the cursor needs to be made more visible than normal
+ If the cursor needs to be made more visible than normal
when it is not on the bottom line (to make, for example, a
- non-blinking underline into an easier to find block or
- blinking underline) give this sequence as <B>cvvis</B>. If there
- is a way to make the cursor completely invisible, give
- that as <B>civis</B>. The capability <B>cnorm</B> should be given which
+ non-blinking underline into an easier to find block or
+ blinking underline) give this sequence as <STRONG>cvvis</STRONG>. If there
+ is a way to make the cursor completely invisible, give
+ that as <STRONG>civis</STRONG>. The capability <STRONG>cnorm</STRONG> should be given which
undoes the effects of both of these modes.
If your terminal correctly generates underlined characters
- (with no special codes needed) even though it does not
- overstrike, then you should give the capability <B>ul</B>. If a
- character overstriking another leaves both characters on
- the screen, specify the capability <B>os</B>. If overstrikes are
- erasable with a blank, then this should be indicated by
- giving <B>eo</B>.
+ (with no special codes needed) even though it does not
+ overstrike, then you should give the capability <STRONG>ul</STRONG>. If a
+ character overstriking another leaves both characters on
+ the screen, specify the capability <STRONG>os</STRONG>. If overstrikes are
+ erasable with a blank, then this should be indicated by
+ giving <STRONG>eo</STRONG>.
- <B>Keypad</B> <B>and</B> <B>Function</B> <B>Keys</B>
+ <STRONG>Keypad</STRONG> <STRONG>and</STRONG> <STRONG>Function</STRONG> <STRONG>Keys</STRONG>
If the terminal has a keypad that transmits codes when the
- keys are pressed, this information can be given. Note that
- it is not possible to handle terminals where the keypad
- only works in local (this applies, for example, to the
- unshifted HP 2621 keys). If the keypad can be set to
- transmit or not transmit, give these codes as <B>smkx</B> and
- <B>rmkx</B>. Otherwise the keypad is assumed to always transmit.
- The codes sent by the left arrow, right arrow, up arrow,
- down arrow, and home keys can be given as <B>kcub1,</B> <B>kcuf1,</B>
- <B>kcuu1,</B> <B>kcud1,</B> and <B>khome</B> respectively. If there are func-
- tion keys such as f0, f1, ..., f10, the codes they send
- can be given as <B>kf0,</B> <B>kf1,</B> <B>...,</B> <B>kf10</B>. If these keys have
- labels other than the default f0 through f10, the labels
- can be given as <B>lf0,</B> <B>lf1,</B> <B>...,</B> <B>lf10</B>. The codes transmit-
- ted by certain other special keys can be given: <B>kll</B> (home
- down), <B>kbs</B> (backspace), <B>ktbc</B> (clear all tabs), <B>kctab</B>
- (clear the tab stop in this column), <B>kclr</B> (clear screen or
- erase key), <B>kdch1</B> (delete character), <B>kdl1</B> (delete line),
- <B>krmir</B> (exit insert mode), <B>kel</B> (clear to end of line), <B>ked</B>
- (clear to end of screen), <B>kich1</B> (insert character or enter
- insert mode), <B>kil1</B> (insert line), <B>knp</B> (next page), <B>kpp</B>
- (previous page), <B>kind</B> (scroll forward/down), <B>kri</B> (scroll
- backward/up), <B>khts</B> (set a tab stop in this column). In
- addition, if the keypad has a 3 by 3 array of keys includ-
- ing the four arrow keys, the other five keys can be given
- as <B>ka1</B>, <B>ka3</B>, <B>kb2</B>, <B>kc1</B>, and <B>kc3</B>. These keys are useful
- when the effects of a 3 by 3 directional pad are needed.
-
- Strings to program function keys can be given as <B>pfkey</B>,
- <B>pfloc</B>, and <B>pfx</B>. A string to program screen labels should
- be specified as <B>pln</B>. Each of these strings takes two
+ keys are pressed, this information can be given. Note
+ that it is not possible to handle terminals where the key-
+ pad only works in local (this applies, for example, to the
+ unshifted HP 2621 keys). If the keypad can be set to
+ transmit or not transmit, give these codes as <STRONG>smkx</STRONG> and
+ <STRONG>rmkx</STRONG>. Otherwise the keypad is assumed to always transmit.
+ The codes sent by the left arrow, right arrow, up arrow,
+ down arrow, and home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG>
+ <STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG> respectively. If there are
+ function keys such as f0, f1, ..., f10, the codes they
+ send can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>. If these keys
+ have labels other than the default f0 through f10, the
+ labels can be given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>. The codes
+ transmitted by certain other special keys can be given:
+ <STRONG>kll</STRONG> (home down), <STRONG>kbs</STRONG> (backspace), <STRONG>ktbc</STRONG> (clear all tabs),
+ <STRONG>kctab</STRONG> (clear the tab stop in this column), <STRONG>kclr</STRONG> (clear
+ screen or erase key), <STRONG>kdch1</STRONG> (delete character), <STRONG>kdl1</STRONG>
+ (delete line), <STRONG>krmir</STRONG> (exit insert mode), <STRONG>kel</STRONG> (clear to end
+ of line), <STRONG>ked</STRONG> (clear to end of screen), <STRONG>kich1</STRONG> (insert
+ character or enter insert mode), <STRONG>kil1</STRONG> (insert line), <STRONG>knp</STRONG>
+ (next page), <STRONG>kpp</STRONG> (previous page), <STRONG>kind</STRONG> (scroll for-
+ ward/down), <STRONG>kri</STRONG> (scroll backward/up), <STRONG>khts</STRONG> (set a tab stop
+ in this column). In addition, if the keypad has a 3 by 3
+ array of keys including the four arrow keys, the other
+ five keys can be given as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>, <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>.
+ These keys are useful when the effects of a 3 by 3 direc-
+ tional pad are needed.
+
+ Strings to program function keys can be given as <STRONG>pfkey</STRONG>,
+ <STRONG>pfloc</STRONG>, and <STRONG>pfx</STRONG>. A string to program screen labels should
+ be specified as <STRONG>pln</STRONG>. Each of these strings takes two
parameters: the function key number to program (from 0 to
10) and the string to program it with. Function key num-
bers out of this range may program undefined keys in a
terminal dependent manner. The difference between the
- capabilities is that <B>pfkey</B> causes pressing the given key
- to be the same as the user typing the given string; <B>pfloc</B>
+ capabilities is that <STRONG>pfkey</STRONG> causes pressing the given key
+ to be the same as the user typing the given string; <STRONG>pfloc</STRONG>
causes the string to be executed by the terminal in local;
- and <B>pfx</B> causes the string to be transmitted to the com-
+ and <STRONG>pfx</STRONG> causes the string to be transmitted to the com-
puter.
- The capabilities <B>nlab</B>, <B>lw</B> and <B>lh</B> define the number of pro-
+ The capabilities <STRONG>nlab</STRONG>, <STRONG>lw</STRONG> and <STRONG>lh</STRONG> define the number of pro-
grammable screen labels and their width and height. If
there are commands to turn the labels on and off, give
- them in <B>smln</B> and <B>rmln</B>. <B>smln</B> is normally output after one
+ them in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>. <STRONG>smln</STRONG> is normally output after one
or more pln sequences to make sure that the change becomes
visible.
- <B>Tabs</B> <B>and</B> <B>Initialization</B>
+ <STRONG>Tabs</STRONG> <STRONG>and</STRONG> <STRONG>Initialization</STRONG>
If the terminal has hardware tabs, the command to advance
- to the next tab stop can be given as <B>ht</B> (usually control
+ to the next tab stop can be given as <STRONG>ht</STRONG> (usually control
I). A ``back-tab'' command which moves leftward to the
- preceding tab stop can be given as <B>cbt</B>. By convention, if
+ preceding tab stop can be given as <STRONG>cbt</STRONG>. By convention, if
the teletype modes indicate that tabs are being expanded
by the computer rather than being sent to the terminal,
- programs should not use <B>ht</B> or <B>cbt</B> even if they are pre-
+ programs should not use <STRONG>ht</STRONG> or <STRONG>cbt</STRONG> even if they are pre-
sent, since the user may not have the tab stops properly
set. If the terminal has hardware tabs which are ini-
- tially set every <I>n</I> spaces when the terminal is powered up,
- the numeric parameter <B>it</B> is given, showing the number of
+ tially set every <EM>n</EM> spaces when the terminal is powered up,
+ the numeric parameter <STRONG>it</STRONG> is given, showing the number of
spaces the tabs are set to. This is normally used by the
- <I>tset</I> command to determine whether to set the mode for
+ <EM>tset</EM> command to determine whether to set the mode for
hardware tab expansion, and whether to set the tab stops.
If the terminal has tab stops that can be saved in non-
volatile memory, the terminfo description can assume that
they are properly set.
- Other capabilities include <B>is1</B>, <B>is2</B>, and <B>is3</B>, initializa-
- tion strings for the terminal, <B>iprog</B>, the path name of a
- program to be run to initialize the terminal, and <B>if</B>, the
+ Other capabilities include <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and <STRONG>is3</STRONG>, initializa-
+ tion strings for the terminal, <STRONG>iprog</STRONG>, the path name of a
+ program to be run to initialize the terminal, and <STRONG>if</STRONG>, the
name of a file containing long initialization strings.
These strings are expected to set the terminal into modes
consistent with the rest of the terminfo description.
- They are normally sent to the terminal, by the <I>init</I> option
- of the <I>tput</I> program, each time the user logs in. They
+ They are normally sent to the terminal, by the <EM>init</EM> option
+ of the <EM>tput</EM> program, each time the user logs in. They
will be printed in the following order: run the program
- <B>iprog</B>; output <B>is1</B>; <B>is2</B>; set the margins using <B>mgc</B>, <B>smgl</B>
- and <B>smgr</B>; set tabs using <B>tbc</B> and <B>hts</B>; print the file <B>if</B>;
- and finally output <B>is3</B>.
+ <STRONG>iprog</STRONG>; output <STRONG>is1</STRONG>; <STRONG>is2</STRONG>; set the margins using <STRONG>mgc</STRONG>, <STRONG>smgl</STRONG>
+ and <STRONG>smgr</STRONG>; set tabs using <STRONG>tbc</STRONG> and <STRONG>hts</STRONG>; print the file <STRONG>if</STRONG>;
+ and finally output <STRONG>is3</STRONG>.
- Most initialization is done with <B>is2</B>. Special terminal
+ Most initialization is done with <STRONG>is2</STRONG>. Special terminal
modes can be set up without duplicating strings by putting
- the common sequences in <B>is2</B> and special cases in <B>is1</B> and
- <B>is3</B>. A pair of sequences that does a harder reset from a
- totally unknown state can be analogously given as <B>rs1</B>,
- <B>rs2</B>, <B>rf</B>, and <B>rs3</B>, analogous to <B>is2</B> and <B>if</B>. These strings
- are output by the <I>reset</I> program, which is used when the
+ the common sequences in <STRONG>is2</STRONG> and special cases in <STRONG>is1</STRONG> and
+ <STRONG>is3</STRONG>. A pair of sequences that does a harder reset from a
+ totally unknown state can be analogously given as <STRONG>rs1</STRONG>,
+ <STRONG>rs2</STRONG>, <STRONG>rf</STRONG>, and <STRONG>rs3</STRONG>, analogous to <STRONG>is2</STRONG> and <STRONG>if</STRONG>. These strings
+ are output by the <EM>reset</EM> program, which is used when the
terminal gets into a wedged state. Commands are normally
- placed in <B>rs1</B>, <B>rs2</B> <B>rs3</B> and <B>rf</B> only if they produce annoy-
+ placed in <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they produce annoy-
ing effects on the screen and are not necessary when log-
ging in. For example, the command to set the vt100 into
- 80-column mode would normally be part of <B>is2</B>, but it
+ 80-column mode would normally be part of <STRONG>is2</STRONG>, but it
causes an annoying glitch of the screen and is not nor-
mally needed since the terminal is usually already in 80
column mode.
If there are commands to set and clear tab stops, they can
- be given as <B>tbc</B> (clear all tab stops) and <B>hts</B> (set a tab
+ be given as <STRONG>tbc</STRONG> (clear all tab stops) and <STRONG>hts</STRONG> (set a tab
stop in the current column of every row). If a more com-
plex sequence is needed to set the tabs than can be
- described by this, the sequence can be placed in <B>is2</B> or
- <B>if</B>.
+ described by this, the sequence can be placed in <STRONG>is2</STRONG> or
+ <STRONG>if</STRONG>.
- <B>Delays</B> <B>and</B> <B>Padding</B>
+ <STRONG>Delays</STRONG> <STRONG>and</STRONG> <STRONG>Padding</STRONG>
Many older and slower terminals don't support either
XON/XOFF or DTR handshaking, including hard copy terminals
and some very archaic CRTs (including, for example, DEC
If the terminal uses xon/xoff handshaking for flow control
(that is, it automatically emits ^S back to the host when
- its input buffers are close to full), set <B>xon</B>. This capa-
+ its input buffers are close to full), set <STRONG>xon</STRONG>. This capa-
bility suppresses the emission of padding. You can also
set it for memory-mapped console devices effectively that
don't have a speed limit. Padding information should
sions about relative costs, but actual pad characters will
not be transmitted.
- If <B>pb</B> (padding baud rate) is given, padding is suppressed
- at baud rates below the value of <B>pb</B>. If the entry has no
+ If <STRONG>pb</STRONG> (padding baud rate) is given, padding is suppressed
+ at baud rates below the value of <STRONG>pb</STRONG>. If the entry has no
padding baud rate, then whether padding is emitted or not
- is completely controlled by <B>xon</B>.
+ is completely controlled by <STRONG>xon</STRONG>.
If the terminal requires other than a null (zero) charac-
- ter as a pad, then this can be given as <B>pad</B>. Only the
- first character of the <B>pad</B> string is used.
+ ter as a pad, then this can be given as <STRONG>pad</STRONG>. Only the
+ first character of the <STRONG>pad</STRONG> string is used.
- <B>Status</B> <B>Lines</B>
+ <STRONG>Status</STRONG> <STRONG>Lines</STRONG>
Some terminals have an extra `status line' which is not
normally used by software (and thus not counted in the
- terminal's <B>lines</B> capability).
+ terminal's <STRONG>lines</STRONG> capability).
The simplest case is a status line which is cursor-
addressable but not part of the main scrolling region on
the screen; the Heathkit H19 has a status line of this
kind, as would a 24-line VT100 with a 23-line scrolling
region set up on initialization. This situation is indi-
- cated by the <B>hs</B> capability.
+ cated by the <STRONG>hs</STRONG> capability.
Some terminals with status lines need special sequences to
access the status line. These may be expressed as a
- string with single parameter <B>tsl</B> which takes the cursor to
+ string with single parameter <STRONG>tsl</STRONG> which takes the cursor to
a given zero-origin column on the status line. The capa-
- bility <B>fsl</B> must return to the main-screen cursor positions
- before the last <B>tsl</B>. You may need to embed the string
- values of <B>sc</B> (save cursor) and <B>rc</B> (restore cursor) in <B>tsl</B>
- and <B>fsl</B> to accomplish this.
+ bility <STRONG>fsl</STRONG> must return to the main-screen cursor positions
+ before the last <STRONG>tsl</STRONG>. You may need to embed the string
+ values of <STRONG>sc</STRONG> (save cursor) and <STRONG>rc</STRONG> (restore cursor) in <STRONG>tsl</STRONG>
+ and <STRONG>fsl</STRONG> to accomplish this.
The status line is normally assumed to be the same width
as the width of the terminal. If this is untrue, you can
- specify it with the numeric capability <B>wsl</B>.
+ specify it with the numeric capability <STRONG>wsl</STRONG>.
A command to erase or blank the status line may be speci-
- fied as <B>dsl</B>.
+ fied as <STRONG>dsl</STRONG>.
- The boolean capability <B>eslok</B> specifies that escape
- sequences, tabs, etc. work ordinarily in the status line.
+ The boolean capability <STRONG>eslok</STRONG> specifies that escape
+ sequences, tabs, etc., work ordinarily in the status line.
- The <B>ncurses</B> implementation does not yet use any of these
+ The <STRONG>ncurses</STRONG> implementation does not yet use any of these
capabilities. They are documented here in case they ever
become important.
- <B>Line</B> <B>Graphics</B>
+ <STRONG>Line</STRONG> <STRONG>Graphics</STRONG>
Many terminals have alternate character sets useful for
- forms-drawing. Terminfo and <B>curses</B> build in support for
+ forms-drawing. Terminfo and <STRONG>curses</STRONG> build in support for
the drawing characters supported by the VT100, with some
characters from the AT&T 4410v1 added. This alternate
- character set may be specified by the <B>acsc</B> capability.
+ character set may be specified by the <STRONG>acsc</STRONG> capability.
- <B>Glyph</B> <B>ACS</B> <B>Ascii</B> <B>VT100</B>
- <B>Name</B> <B>Name</B> <B>Default</B> <B>Name</B>
+ <STRONG>Glyph</STRONG> <STRONG>ACS</STRONG> <STRONG>Ascii</STRONG> <STRONG>VT100</STRONG>
+ <STRONG>Name</STRONG> <STRONG>Name</STRONG> <STRONG>Default</STRONG> <STRONG>Name</STRONG>
UK pound sign ACS_STERLING f }
arrow pointing down ACS_DARROW v .
arrow pointing left ACS_LARROW < ,
The best way to define a new device's graphics set is to
add a column to a copy of this table for your terminal,
giving the character which (when emitted between
- <B>smacs</B>/<B>rmacs</B> switches) will be rendered as the correspond-
+ <STRONG>smacs</STRONG>/<STRONG>rmacs</STRONG> switches) will be rendered as the correspond-
ing graphic. Then read off the VT100/your terminal char-
acter pairs right to left in sequence; these become the
ACSC string.
- <B>Color</B> <B>Handling</B>
+ <STRONG>Color</STRONG> <STRONG>Handling</STRONG>
Most color terminals are either `Tektronix-like' or `HP-
like'. Tektronix-like terminals have a predefined set of
N colors (where N usually 8), and can set character-cell
ANSI-compatible terminals are Tektronix-like.
Some basic color capabilities are independent of the color
- method. The numeric capabilities <B>colors</B> and <B>pairs</B> specify
+ method. The numeric capabilities <STRONG>colors</STRONG> and <STRONG>pairs</STRONG> specify
the maximum numbers of colors and color-pairs that can be
- displayed simultaneously. The <B>op</B> (original pair) string
+ displayed simultaneously. The <STRONG>op</STRONG> (original pair) string
resets foreground and background colors to their default
- values for the terminal. The <B>oc</B> string resets all colors
+ values for the terminal. The <STRONG>oc</STRONG> string resets all colors
or color-pairs to their default values for the terminal.
Some terminals (including many PC terminal emulators)
erase screen areas with the current background color
rather than the power-up default background; these should
- have the boolean capability <B>bce</B>.
+ have the boolean capability <STRONG>bce</STRONG>.
To change the current foreground or background color on a
- Tektronix-type terminal, use <B>setaf</B> (set ANSI foreground)
- and <B>setab</B> (set ANSI background) or <B>setf</B> (set foreground)
- and <B>setb</B> (set background). These take one parameter, the
+ Tektronix-type terminal, use <STRONG>setaf</STRONG> (set ANSI foreground)
+ and <STRONG>setab</STRONG> (set ANSI background) or <STRONG>setf</STRONG> (set foreground)
+ and <STRONG>setb</STRONG> (set background). These take one parameter, the
color number. The SVr4 documentation describes only
- <B>setaf</B>/<B>setab</B>; the XPG4 draft says that "If the terminal
+ <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft says that "If the terminal
supports ANSI escape sequences to set background and fore-
- ground, they should be coded as <B>setaf</B> and <B>setab</B>, respec-
+ ground, they should be coded as <STRONG>setaf</STRONG> and <STRONG>setab</STRONG>, respec-
tively. If the terminal supports other escape sequences
to set background and foreground, they should be coded as
- <B>setf</B> and <B>setb</B>, respectively. The <I>vidputs()</I> function and
- the refresh functions use <B>setaf</B> and <B>setab</B> if they are
+ <STRONG>setf</STRONG> and <STRONG>setb</STRONG>, respectively. The <EM>vidputs()</EM> function and
+ the refresh functions use <STRONG>setaf</STRONG> and <STRONG>setab</STRONG> if they are
defined."
- The <B>setaf</B>/<B>setab</B> and <B>setf</B>/<B>setb</B> capabilities take a single
+ The <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> and <STRONG>setf</STRONG>/<STRONG>setb</STRONG> capabilities take a single
numeric argument each. Argument values 0-7 are portably
defined as follows (the middle column is the symbolic
- #define available in the header for the <B>curses</B> or <B>ncurses</B>
+ #define available in the header for the <STRONG>curses</STRONG> or <STRONG>ncurses</STRONG>
libraries). The terminal hardware is free to map these as
it likes, but the RGB values indicate normal locations in
color space.
- <B>Color</B> <B>#define</B> <B>Value</B> <B>RGB</B>
- black <B>COLOR_BLACK</B> 0 0, 0, 0
- red <B>COLOR_RED</B> 1 max,0,0
- green <B>COLOR_GREEN</B> 2 0,max,0
- yellow <B>COLOR_YELLOW</B> 3 max,max,0
- blue <B>COLOR_BLUE</B> 4 0,0,max
- magenta <B>COLOR_MAGENTA</B> 5 max,0,max
- cyan <B>COLOR_CYAN</B> 6 0,max,max
- white <B>COLOR_WHITE</B> 7 max,max,max
-
- On an HP-like terminal, use <B>scp</B> with a color-pair number
+ <STRONG>Color</STRONG> <STRONG>#define</STRONG> <STRONG>Value</STRONG> <STRONG>RGB</STRONG>
+ black <STRONG>COLOR_BLACK</STRONG> 0 0, 0, 0
+ red <STRONG>COLOR_RED</STRONG> 1 max,0,0
+ green <STRONG>COLOR_GREEN</STRONG> 2 0,max,0
+ yellow <STRONG>COLOR_YELLOW</STRONG> 3 max,max,0
+ blue <STRONG>COLOR_BLUE</STRONG> 4 0,0,max
+ magenta <STRONG>COLOR_MAGENTA</STRONG> 5 max,0,max
+ cyan <STRONG>COLOR_CYAN</STRONG> 6 0,max,max
+ white <STRONG>COLOR_WHITE</STRONG> 7 max,max,max
+
+ On an HP-like terminal, use <STRONG>scp</STRONG> with a color-pair number
parameter to set which color pair is current.
- On a Tektronix-like terminal, the capability <B>ccc</B> may be
+ On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may be
present to indicate that colors can be modified. If so,
- the <B>initc</B> capability will take a color number (0 to <B>colors</B>
+ the <STRONG>initc</STRONG> capability will take a color number (0 to <STRONG>colors</STRONG>
- 1)and three more parameters which describe the color.
These three parameters default to being interpreted as RGB
- (Red, Green, Blue) values. If the boolean capability <B>hls</B>
+ (Red, Green, Blue) values. If the boolean capability <STRONG>hls</STRONG>
is present, they are instead as HLS (Hue, Lightness, Satu-
ration) indices. The ranges are terminal-dependent.
- On an HP-like terminal, <B>initp</B> may give a capability for
+ On an HP-like terminal, <STRONG>initp</STRONG> may give a capability for
changing a color-pair value. It will take seven parame-
- ters; a color-pair number (0 to <B>max_pairs</B> - 1), and two
+ ters; a color-pair number (0 to <STRONG>max_pairs</STRONG> - 1), and two
triples describing first background and then foreground
colors. These parameters must be (Red, Green, Blue) or
- (Hue, Lightness, Saturation) depending on <B>hls</B>.
+ (Hue, Lightness, Saturation) depending on <STRONG>hls</STRONG>.
On some color terminals, colors collide with highlights.
- You can register these collisions with the <B>ncv</B> capability.
+ You can register these collisions with the <STRONG>ncv</STRONG> capability.
This is a bit-mask of attributes not to be used when col-
ors are enabled. The correspondence with the attributes
- understood by <B>curses</B> is as follows:
+ understood by <STRONG>curses</STRONG> is as follows:
- <B>Attribute</B> <B>Bit</B> <B>Decimal</B>
+ <STRONG>Attribute</STRONG> <STRONG>Bit</STRONG> <STRONG>Decimal</STRONG>
A_STANDOUT 0 1
A_UNDERLINE 1 2
A_REVERSE 2 4
For example, on many IBM PC consoles, the underline
attribute collides with the foreground color blue and is
- not available in color mode. These should have an <B>ncv</B>
+ not available in color mode. These should have an <STRONG>ncv</STRONG>
capability of 2.
- SVr4 curses does nothing with <B>ncv</B>, ncurses recognizes it
+ SVr4 curses does nothing with <STRONG>ncv</STRONG>, ncurses recognizes it
and optimizes the output in favor of colors.
- <B>Miscellaneous</B>
+ <STRONG>Miscellaneous</STRONG>
If the terminal requires other than a null (zero) charac-
ter as a pad, then this can be given as pad. Only the
first character of the pad string is used. If the termi-
nal does not have a pad character, specify npc. Note that
- ncurses implements the termcap-compatible <B>PC</B> variable;
+ ncurses implements the termcap-compatible <STRONG>PC</STRONG> variable;
though the application may set this value to something
- other than a null, ncurses will test <B>npc</B> first and use
+ other than a null, ncurses will test <STRONG>npc</STRONG> first and use
napms if the terminal has no pad character.
If the terminal can move up or down half a line, this can
- be indicated with <B>hu</B> (half-line up) and <B>hd</B> (half-line
- down). This is primarily useful for superscripts and
- subscripts on hard-copy terminals. If a hard-copy termi-
- nal can eject to the next page (form feed), give this as
- <B>ff</B> (usually control L).
+ be indicated with <STRONG>hu</STRONG> (half-line up) and <STRONG>hd</STRONG> (half-line
+ down). This is primarily useful for superscripts and sub-
+ scripts on hard-copy terminals. If a hard-copy terminal
+ can eject to the next page (form feed), give this as <STRONG>ff</STRONG>
+ (usually control L).
If there is a command to repeat a given character a given
number of times (to save time transmitting a large number
of identical characters) this can be indicated with the
- parameterized string <B>rep</B>. The first parameter is the
+ parameterized string <STRONG>rep</STRONG>. The first parameter is the
character to be repeated and the second is the number of
times to repeat it. Thus, tparm(repeat_char, 'x', 10) is
the same as `xxxxxxxxxx'.
If the terminal has a settable command character, such as
- the TEKTRONIX 4025, this can be indicated with <B>cmdch</B>. A
+ the TEKTRONIX 4025, this can be indicated with <STRONG>cmdch</STRONG>. A
prototype command character is chosen which is used in all
- capabilities. This character is given in the <B>cmdch</B> capa-
+ capabilities. This character is given in the <STRONG>cmdch</STRONG> capa-
bility to identify it. The following convention is sup-
ported on some UNIX systems: The environment is to be
- searched for a <B>CC</B> variable, and if found, all occurrences
+ searched for a <STRONG>CC</STRONG> variable, and if found, all occurrences
of the prototype character are replaced with the character
in the environment variable.
Terminal descriptions that do not represent a specific
- kind of known terminal, such as <I>switch</I>, <I>dialup</I>, <I>patch</I>, and
- <I>network</I>, should include the <B>gn</B> (generic) capability so
+ kind of known terminal, such as <EM>switch</EM>, <EM>dialup</EM>, <EM>patch</EM>, and
+ <EM>network</EM>, should include the <STRONG>gn</STRONG> (generic) capability so
that programs can complain that they do not know how to
talk to the terminal. (This capability does not apply to
- <I>virtual</I> terminal descriptions for which the escape
+ <EM>virtual</EM> terminal descriptions for which the escape
sequences are known.)
If the terminal has a ``meta key'' which acts as a shift
key, setting the 8th bit of any character transmitted,
- this fact can be indicated with <B>km</B>. Otherwise, software
+ this fact can be indicated with <STRONG>km</STRONG>. Otherwise, software
will assume that the 8th bit is parity and it will usually
be cleared. If strings exist to turn this ``meta mode''
- on and off, they can be given as <B>smm</B> and <B>rmm</B>.
+ on and off, they can be given as <STRONG>smm</STRONG> and <STRONG>rmm</STRONG>.
If the terminal has more lines of memory than will fit on
the screen at once, the number of lines of memory can be
- indicated with <B>lm</B>. A value of <B>lm</B>#0 indicates that the
+ indicated with <STRONG>lm</STRONG>. A value of <STRONG>lm</STRONG>#0 indicates that the
number of lines is not fixed, but that there is still more
memory than fits on the screen.
If the terminal is one of those supported by the UNIX vir-
tual terminal protocol, the terminal number can be given
- as <B>vt</B>.
+ as <STRONG>vt</STRONG>.
Media copy strings which control an auxiliary printer con-
- nected to the terminal can be given as <B>mc0</B>: print the con-
- tents of the screen, <B>mc4</B>: turn off the printer, and <B>mc5</B>:
+ nected to the terminal can be given as <STRONG>mc0</STRONG>: print the con-
+ tents of the screen, <STRONG>mc4</STRONG>: turn off the printer, and <STRONG>mc5</STRONG>:
turn on the printer. When the printer is on, all text
sent to the terminal will be sent to the printer. It is
undefined whether the text is also displayed on the termi-
- nal screen when the printer is on. A variation <B>mc5p</B> takes
+ nal screen when the printer is on. A variation <STRONG>mc5p</STRONG> takes
one parameter, and leaves the printer on for as many char-
acters as the value of the parameter, then turns the
printer off. The parameter should not exceed 255. All
- text, including <B>mc4</B>, is transparently passed to the
- printer while an <B>mc5p</B> is in effect.
+ text, including <STRONG>mc4</STRONG>, is transparently passed to the
+ printer while an <STRONG>mc5p</STRONG> is in effect.
- <B>Glitches</B> <B>and</B> <B>Braindamage</B>
+ <STRONG>Glitches</STRONG> <STRONG>and</STRONG> <STRONG>Braindamage</STRONG>
Hazeltine terminals, which do not allow `~' characters to
- be displayed should indicate <B>hz</B>.
+ be displayed should indicate <STRONG>hz</STRONG>.
- Terminals which ignore a line-feed immediately after an <B>am</B>
- wrap, such as the Concept and vt100, should indicate <B>xenl</B>.
+ Terminals which ignore a line-feed immediately after an <STRONG>am</STRONG>
+ wrap, such as the Concept and vt100, should indicate <STRONG>xenl</STRONG>.
- If <B>el</B> is required to get rid of standout (instead of
- merely writing normal text on top of it), <B>xhp</B> should be
+ If <STRONG>el</STRONG> is required to get rid of standout (instead of
+ merely writing normal text on top of it), <STRONG>xhp</STRONG> should be
given.
Teleray terminals, where tabs turn all characters moved
- over to blanks, should indicate <B>xt</B> (destructive tabs).
+ over to blanks, should indicate <STRONG>xt</STRONG> (destructive tabs).
Note: the variable indicating this is now
`dest_tabs_magic_smso'; in older versions, it was tel-
eray_glitch. This glitch is also taken to mean that it is
tation ignores this glitch.
The Beehive Superbee, which is unable to correctly trans-
- mit the escape or control C characters, has <B>xsb</B>, indicat-
+ mit the escape or control C characters, has <STRONG>xsb</STRONG>, indicat-
ing that the f1 key is used for escape and f2 for control
C. (Only certain Superbees have this problem, depending
on the ROM.) Note that in older terminfo versions, this
`no_esc_ctl_c'.
Other specific terminal problems may be corrected by
- adding more capabilities of the form <B>x</B><I>x</I>.
+ adding more capabilities of the form <STRONG>x</STRONG><EM>x</EM>.
- <B>Similar</B> <B>Terminals</B>
+ <STRONG>Similar</STRONG> <STRONG>Terminals</STRONG>
If there are two very similar terminals, one (the variant)
can be defined as being just like the other (the base)
with certain exceptions. In the definition of the vari-
- ant, the string capability <B>use</B> can be given with the name
- of the base terminal. The capabilities given before <B>use</B>
- override those in the base type named by <B>use</B>. If there
- are multiple <B>use</B> capabilities, they are merged in reverse
- order. That is, the rightmost <B>use</B> reference is processed
+ ant, the string capability <STRONG>use</STRONG> can be given with the name
+ of the base terminal. The capabilities given before <STRONG>use</STRONG>
+ override those in the base type named by <STRONG>use</STRONG>. If there
+ are multiple <STRONG>use</STRONG> capabilities, they are merged in reverse
+ order. That is, the rightmost <STRONG>use</STRONG> reference is processed
first, then the one to its left, and so forth. Capabili-
ties given explicitly in the entry override those brought
- in by <B>use</B> references.
+ in by <STRONG>use</STRONG> references.
- A capability can be canceled by placing <B>xx@</B> to the left of
- the use reference that imports it, where <I>xx</I> is the capa-
+ A capability can be canceled by placing <STRONG>xx@</STRONG> to the left of
+ the use reference that imports it, where <EM>xx</EM> is the capa-
bility. For example, the entry
-
2621-nl, smkx@, rmkx@, use=2621,
- defines a 2621-nl that does not have the <B>smkx</B> or <B>rmkx</B>
+ defines a 2621-nl that does not have the <STRONG>smkx</STRONG> or <STRONG>rmkx</STRONG>
capabilities, and hence does not turn on the function key
labels when in visual mode. This is useful for different
modes for a terminal, or for different user preferences.
- <B>Pitfalls</B> <B>of</B> <B>Long</B> <B>Entries</B>
+ <STRONG>Pitfalls</STRONG> <STRONG>of</STRONG> <STRONG>Long</STRONG> <STRONG>Entries</STRONG>
Long terminfo entries are unlikely to be a problem; to
date, no entry has even approached terminfo's 4K string-
table maximum. Unfortunately, the termcap translations
minal types and users whose TERM variable does not have a
termcap entry.
- When in -C (translate to termcap) mode, the <B>ncurses</B> imple-
- mentation of <B><A HREF="tic.1.html">tic(1)</A></B> issues warning messages when the pre-
+ When in -C (translate to termcap) mode, the <STRONG>ncurses</STRONG> imple-
+ mentation of <STRONG><A HREF="tic.1.html">tic(1)</A></STRONG> issues warning messages when the pre-
tc length of a termcap translation is too long. The -c
(check) option also checks resolved (after tc expansion)
lengths.
- <B>Binary</B> <B>Compatibility</B>
+ <STRONG>Binary</STRONG> <STRONG>Compatibility</STRONG>
It is not wise to count on portability of binary terminfo
entries between commercial UNIX versions. The problem is
that there are at least two versions of terminfo (under
</PRE>
<H2>EXTENSIONS</H2><PRE>
- Some SVr4 <B>curses</B> implementations, and all previous to
+ Some SVr4 <STRONG>curses</STRONG> implementations, and all previous to
SVr4, don't interpret the %A and %O operators in parameter
strings.
- SVr4/XPG4 do not specify whether <B>msgr</B> licenses movement
+
+ SVr4/XPG4 do not specify whether <STRONG>msgr</STRONG> licenses movement
while in an alternate-character-set mode (such modes may,
among other things, map CR and NL to characters that don't
- trigger local motions). The <B>ncurses</B> implementation
- ignores <B>msgr</B> in <B>ALTCHARSET</B> mode. This raises the possi-
+ trigger local motions). The <STRONG>ncurses</STRONG> implementation
+ ignores <STRONG>msgr</STRONG> in <STRONG>ALTCHARSET</STRONG> mode. This raises the possi-
bility that an XPG4 implementation making the opposite
- interpretation may need terminfo entries made for <B>ncurses</B>
- to have <B>msgr</B> turned off.
+ interpretation may need terminfo entries made for <STRONG>ncurses</STRONG>
+ to have <STRONG>msgr</STRONG> turned off.
- The <B>ncurses</B> library handles insert-character and insert-
- character modes in a slightly non-standard way in order to
- get better update efficiency. See the <B>Insert/Delete</B> <B>Char-</B>
- <B>acter</B> subsection above.
+ The <STRONG>ncurses</STRONG> library handles insert-character and insert-
+ character modes in a slightly non-standard way to get bet-
+ ter update efficiency. See the <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
+ subsection above.
- The parameter substitutions for <B>set_clock</B> and <B>dis-</B>
- <B>play_clock</B> are not documented in SVr4 or the XSI Curses
+ The parameter substitutions for <STRONG>set_clock</STRONG> and <STRONG>dis-</STRONG>
+ <STRONG>play_clock</STRONG> are not documented in SVr4 or the XSI Curses
standard. They are deduced from the documentation for the
AT&T 505 terminal.
- Be careful assigning the <B>kmous</B> capability. The <B>ncurses</B>
- wants to interpret it as <B>KEY_MOUSE</B>, for use by terminals
+ Be careful assigning the <STRONG>kmous</STRONG> capability. The <STRONG>ncurses</STRONG>
+ wants to interpret it as <STRONG>KEY_MOUSE</STRONG>, for use by terminals
and emulators like xterm that can return mouse-tracking
information in the keyboard-input stream.
cases) different extension sets. Here is a summary, accu-
rate as of October 1995:
- <B>SVR4,</B> <B>Solaris,</B> <B>ncurses</B> -- These support all SVr4 capabili-
+ <STRONG>SVR4,</STRONG> <STRONG>Solaris,</STRONG> <STRONG>ncurses</STRONG> -- These support all SVr4 capabili-
ties.
- <B>SGI</B> -- Supports the SVr4 set, adds one undocumented
- extended string capability (<B>set_pglen</B>).
+ <STRONG>SGI</STRONG> -- Supports the SVr4 set, adds one undocumented
+ extended string capability (<STRONG>set_pglen</STRONG>).
- <B>SVr1,</B> <B>Ultrix</B> -- These support a restricted subset of ter-
- minfo capabilities. The booleans end with <B>xon_xoff</B>; the
- numerics with <B>width_status_line</B>; and the strings with
- <B>prtr_non</B>.
+ <STRONG>SVr1,</STRONG> <STRONG>Ultrix</STRONG> -- These support a restricted subset of ter-
+ minfo capabilities. The booleans end with <STRONG>xon_xoff</STRONG>; the
+ numerics with <STRONG>width_status_line</STRONG>; and the strings with
+ <STRONG>prtr_non</STRONG>.
- <B>HP/UX</B> -- Supports the SVr1 subset, plus the SVr[234]
- numerics <B>num_labels</B>, <B>label_height</B>, <B>label_width</B>, plus func-
- tion keys 11 through 63, plus <B>plab_norm</B>, <B>label_on</B>, and
- <B>label_off</B>, plus some incompatible extensions in the string
+ <STRONG>HP/UX</STRONG> -- Supports the SVr1 subset, plus the SVr[234]
+ numerics <STRONG>num_labels</STRONG>, <STRONG>label_height</STRONG>, <STRONG>label_width</STRONG>, plus func-
+ tion keys 11 through 63, plus <STRONG>plab_norm</STRONG>, <STRONG>label_on</STRONG>, and
+ <STRONG>label_off</STRONG>, plus some incompatible extensions in the string
table.
- <B>AIX</B> -- Supports the SVr1 subset, plus function keys 11
+ <STRONG>AIX</STRONG> -- Supports the SVr1 subset, plus function keys 11
through 63, plus a number of incompatible string table
extensions.
- <B>OSF</B> -- Supports both the SVr4 set and the AIX extensions.
+ <STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
</PRE>
descriptions
+
</PRE>
<H2>SEE ALSO</H2><PRE>
- <B><A HREF="tic.1m.html">tic(1m)</A></B>, <B><A HREF="ncurses.3x.html">curses(3x)</A></B>, <B><A HREF="printf.3S.html">printf(3S)</A></B>, <B><A HREF="term.5.html">term(5)</A></B>.
+ <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="printf.3S.html">printf(3S)</A></STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
</PRE>
+
+
projects / ncurses.git / blobdiff