-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<!--
* t
* DO NOT EDIT THIS FILE BY HAND!
* Note: this must be run through tbl before nroff.
* The magic cookie on the first line triggers this under some man programs.
****************************************************************************
- * Copyright (c) 1998-2004,2006 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2012,2013 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: terminfo.head,v 1.13 2006/05/13 15:35:45 tom Exp @
+ * @Id: terminfo.head,v 1.21 2013/03/09 22:11:36 tom Exp @
* Head of terminfo man page ends here
- * @Id: terminfo.tail,v 1.44 2006/04/01 22:47:01 tom Exp @
+ * @Id: terminfo.tail,v 1.69 2015/04/26 14:47:23 tom Exp @
* Beginning of terminfo.tail file
* This file is part of ncurses.
* See "terminfo.head" for copyright.
*.in +2
*.TH
-->
+<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
<HEAD>
-<TITLE>TERMINFO 5 File Formats</TITLE>
+<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
+<meta name="generator" content="Manpage converted by man2html - see http://invisible-island.net/scripts/readme.html#others_scripts">
+<TITLE>terminfo 5 File Formats</TITLE>
<link rev=made href="mailto:bug-ncurses@gnu.org">
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</HEAD>
<BODY>
-<H1>TERMINFO 5 File Formats</H1>
-<HR>
+<H1 class="no-header">terminfo 5 File Formats</H1>
<PRE>
-<!-- Manpage converted by man2html 3.0.1 -->
-<STRONG><A HREF="TERMINFO.5.html">TERMINFO(5)</A></STRONG> File Formats <STRONG><A HREF="TERMINFO.5.html">TERMINFO(5)</A></STRONG>
+<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> File Formats <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
-</PRE>
-<H2>NAME</H2><PRE>
+</PRE><H2><a name="h2-NAME">NAME</a></H2><PRE>
terminfo - terminal capability data base
-</PRE>
-<H2>SYNOPSIS</H2><PRE>
+</PRE><H2><a name="h2-SYNOPSIS">SYNOPSIS</a></H2><PRE>
/usr/share/terminfo/*/*
-</PRE>
-<H2>DESCRIPTION</H2><PRE>
+</PRE><H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
<EM>Terminfo</EM> is a data base describing terminals, used by
- screen-oriented programs such as <STRONG><A HREF="nvi.1.html">nvi(1)</A></STRONG>, <STRONG><A HREF="rogue.1.html">rogue(1)</A></STRONG> and
+ screen-oriented programs such as <STRONG>nvi(1)</STRONG>, <STRONG>rogue(1)</STRONG> and
libraries such as <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>. <EM>Terminfo</EM> describes termi-
nals by giving a set of capabilities which they have, by
specifying how to perform screen operations, and by speci-
fying padding requirements and initialization sequences.
- This describes <STRONG>ncurses</STRONG> version 5.5 (patch 20061209).
+ This describes <STRONG>ncurses</STRONG> version 6.0 (patch 20160820).
Entries in <EM>terminfo</EM> consist of a sequence of `,' separated
fields (embedded commas may be escaped with a backslash or
Lines beginning with a `#' in the first column are treated
as comments. While comment lines are legal at any point,
- the output of <EM>captoinfo</EM> and <EM>infotocap</EM> (aliases for <EM>tic</EM>)
+ the output of <STRONG>captoinfo</STRONG> and <STRONG>infotocap</STRONG> (aliases for <STRONG>tic</STRONG>)
will move comments so they occur only between entries.
Newlines and leading tabs may be used for formatting
entries for readability. These are removed from parsed
- entries. The <EM>infocmp</EM> <EM>-f</EM> option relies on this to format
- if-then-else expressions: the result can be read by <EM>tic</EM>.
+ entries. The <STRONG>infocmp</STRONG> <STRONG>-f</STRONG> option relies on this to format
+ if-then-else expressions: the result can be read by <STRONG>tic</STRONG>.
Terminal names (except for the last, verbose entry) should
be chosen using the following conventions. The particular
piece of hardware making up the terminal should have a
- root name, thus ``hp2621''. This name should not contain
+ root name, thus "hp2621". This name should not contain
hyphens. Modes that the hardware can be in, or user pref-
erences, should be indicated by appending a hyphen and a
mode suffix. Thus, a vt100 in 132 column mode would be
vt100-w. The following suffixes should be used where pos-
sible:
-
<STRONG>Suffix</STRONG> <STRONG>Meaning</STRONG> <STRONG>Example</STRONG>
-<EM>nn</EM> Number of lines on the screen aaa-60
-<EM>n</EM>p Number of pages of memory c100-4p
-ns No status line hp2626-ns
-rv Reverse video c100-rv
-s Enable status line vt100-s
-
-vb Use visible bell instead of beep wy370-vb
+
-w Wide mode (> 80 columns, usually 132) vt100-w
For more on terminal naming conventions, see the <STRONG>term(7)</STRONG>
manual page.
- <STRONG>Capabilities</STRONG>
+
+</PRE><H3><a name="h3-Predefined-Capabilities">Predefined Capabilities</a></H3><PRE>
The following is a complete table of the capabilities
included in a terminfo description block and available to
terminfo-using code. In each line of the table,
These are the boolean capabilities:
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Booleans</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- auto_left_margin bw bw cub1 wraps from col-
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Booleans</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ auto_left_margin bw bw cub1 wraps from col-
umn 0 to last column
- auto_right_margin am am terminal has auto-
+ auto_right_margin am am terminal has auto-
matic margins
- back_color_erase bce ut screen erased with
+ back_color_erase bce ut screen erased with
background color
- can_change ccc cc terminal can re-
+ can_change ccc cc terminal can re-
define existing col-
ors
- ceol_standout_glitch xhp xs standout not erased
+ ceol_standout_glitch xhp xs standout not erased
by overwriting (hp)
- col_addr_glitch xhpa YA only positive motion
+ col_addr_glitch xhpa YA only positive motion
for hpa/mhpa caps
- cpi_changes_res cpix YF changing character
+
+ cpi_changes_res cpix YF changing character
pitch changes reso-
lution
- cr_cancels_micro_mode crxm YB using cr turns off
+ cr_cancels_micro_mode crxm YB using cr turns off
micro mode
- dest_tabs_magic_smso xt xt tabs destructive,
+ dest_tabs_magic_smso xt xt tabs destructive,
magic so char
(t1061)
- eat_newline_glitch xenl xn newline ignored
+ eat_newline_glitch xenl xn newline ignored
after 80 cols (con-
cept)
- erase_overstrike eo eo can erase over-
+ erase_overstrike eo eo can erase over-
strikes with a blank
- generic_type gn gn generic line type
- hard_copy hc hc hardcopy terminal
- hard_cursor chts HC cursor is hard to
+ generic_type gn gn generic line type
+ hard_copy hc hc hardcopy terminal
+ hard_cursor chts HC cursor is hard to
see
- has_meta_key km km Has a meta key
+ has_meta_key km km Has a meta key
(i.e., sets 8th-bit)
- has_print_wheel daisy YC printer needs opera-
+ has_print_wheel daisy YC printer needs opera-
tor to change char-
acter set
- has_status_line hs hs has extra status
+ has_status_line hs hs has extra status
line
- hue_lightness_saturation hls hl terminal uses only
+ hue_lightness_saturation hls hl terminal uses only
HLS color notation
(Tektronix)
- insert_null_glitch in in insert mode distin-
+ insert_null_glitch in in insert mode distin-
guishes nulls
- lpi_changes_res lpix YG changing line pitch
+ lpi_changes_res lpix YG changing line pitch
changes resolution
- memory_above da da display may be
+ memory_above da da display may be
retained above the
screen
- memory_below db db display may be
+ memory_below db db display may be
retained below the
screen
- move_insert_mode mir mi safe to move while
+ move_insert_mode mir mi safe to move while
in insert mode
- move_standout_mode msgr ms safe to move while
+ move_standout_mode msgr ms safe to move while
in standout mode
- needs_xon_xoff nxon nx padding will not
+ needs_xon_xoff nxon nx padding will not
work, xon/xoff
required
- no_esc_ctlc xsb xb beehive (f1=escape,
+ no_esc_ctlc xsb xb beehive (f1=escape,
f2=ctrl C)
- no_pad_char npc NP pad character does
+ no_pad_char npc NP pad character does
not exist
- non_dest_scroll_region ndscr ND scrolling region is
+ non_dest_scroll_region ndscr ND scrolling region is
non-destructive
- non_rev_rmcup nrrmc NR smcup does not
+ non_rev_rmcup nrrmc NR smcup does not
reverse rmcup
- over_strike os os terminal can over-
+ over_strike os os terminal can over-
strike
- prtr_silent mc5i 5i printer will not
+ prtr_silent mc5i 5i printer will not
echo on screen
- row_addr_glitch xvpa YD only positive motion
+ row_addr_glitch xvpa YD only positive motion
for vpa/mvpa caps
- semi_auto_right_margin sam YE printing in last
+ semi_auto_right_margin sam YE printing in last
column causes cr
- status_line_esc_ok eslok es escape can be used
+ status_line_esc_ok eslok es escape can be used
on the status line
- tilde_glitch hz hz cannot print ~'s
- (hazeltine)
+ tilde_glitch hz hz cannot print ~'s
+ (Hazeltine)
- transparent_underline ul ul underline character
+ transparent_underline ul ul underline character
overstrikes
- xon_xoff xon xo terminal uses
+ xon_xoff xon xo terminal uses
xon/xoff handshaking
These are the numeric capabilities:
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- columns cols co number of columns in
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ columns cols co number of columns in
a line
- init_tabs it it tabs initially every
+ init_tabs it it tabs initially every
# spaces
- label_height lh lh rows in each label
- label_width lw lw columns in each
+ label_height lh lh rows in each label
+ label_width lw lw columns in each
label
- lines lines li number of lines on
+ lines lines li number of lines on
screen or page
- lines_of_memory lm lm lines of memory if >
+ lines_of_memory lm lm lines of memory if >
line. 0 means varies
- magic_cookie_glitch xmc sg number of blank
+ magic_cookie_glitch xmc sg number of blank
characters left by
smso or rmso
- max_attributes ma ma maximum combined
+ max_attributes ma ma maximum combined
attributes terminal
can handle
- max_colors colors Co maximum number of
+ max_colors colors Co maximum number of
colors on screen
- max_pairs pairs pa maximum number of
+ max_pairs pairs pa maximum number of
color-pairs on the
screen
- maximum_windows wnum MW maximum number of
- defineable windows
- no_color_video ncv NC video attributes
+ maximum_windows wnum MW maximum number of
+ definable windows
+ no_color_video ncv NC video attributes
that cannot be used
with colors
- num_labels nlab Nl number of labels on
+ num_labels nlab Nl number of labels on
screen
- padding_baud_rate pb pb lowest baud rate
+ padding_baud_rate pb pb lowest baud rate
where padding needed
- virtual_terminal vt vt virtual terminal
+ virtual_terminal vt vt virtual terminal
number (CB/unix)
- width_status_line wsl ws number of columns in
+ width_status_line wsl ws number of columns in
status line
The following numeric capabilities are present in the
man page. They came in with SVr4's printer support.
- <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
- <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
- bit_image_entwining bitwin Yo number of passes for
+ <STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
+ <STRONG>Numeric</STRONG> <STRONG>name</STRONG> <STRONG>Code</STRONG>
+ bit_image_entwining bitwin Yo number of passes for
each bit-image row
- bit_image_type bitype Yp type of bit-image
+ bit_image_type bitype Yp type of bit-image
device
- buffer_capacity bufsz Ya numbers of bytes
+ buffer_capacity bufsz Ya numbers of bytes
buffered before
printing
- buttons btns BT number of buttons on
+ buttons btns BT number of buttons on
mouse
- dot_horz_spacing spinh Yc spacing of dots hor-
+ dot_horz_spacing spinh Yc spacing of dots hor-
izontally in dots
per inch
- dot_vert_spacing spinv Yb spacing of pins ver-
+ dot_vert_spacing spinv Yb spacing of pins ver-
tically in pins per
inch
- max_micro_address maddr Yd maximum value in
+ max_micro_address maddr Yd maximum value in
micro_..._address
- max_micro_jump mjump Ye maximum value in
+ max_micro_jump mjump Ye maximum value in
parm_..._micro
- micro_col_size mcs Yf character step size
+ micro_col_size mcs Yf character step size
when in micro mode
- micro_line_size mls Yg line step size when
+ micro_line_size mls Yg line step size when
in micro mode
- number_of_pins npins Yh numbers of pins in
+ number_of_pins npins Yh numbers of pins in
print-head
- output_res_char orc Yi horizontal resolu-
+ output_res_char orc Yi horizontal resolu-
tion in units per
line
- output_res_horz_inch orhi Yk horizontal resolu-
+ output_res_horz_inch orhi Yk horizontal resolu-
tion in units per
inch
- output_res_line orl Yj vertical resolution
+ output_res_line orl Yj vertical resolution
in units per line
- output_res_vert_inch orvi Yl vertical resolution
+ output_res_vert_inch orvi Yl vertical resolution
in units per inch
- print_rate cps Ym print rate in char-
+ print_rate cps Ym print rate in char-
acters per second
- wide_char_size widcs Yn character step size
+ wide_char_size widcs Yn character step size
when in double wide
mode
prototype !?
create_window cwin CW define a window #1
from #2,#3 to #4,#5
- cursor_address cup cm move to row #1
- columns #2
+ cursor_address cup cm move to row #1 col-
+ umns #2
cursor_down cud1 do down one line
cursor_home home ho home cursor (if no
cup)
zero_motion zerom Zx No motion for subse-
quent character
- The following string capabilities are present in the
- SVr4.0 term structure, but were originally not documented
+ The following string capabilities are present in the
+ SVr4.0 term structure, but were originally not documented
in the man page.
multiple codesets
color_names colornm Yw Give name for
color #1
- define_bit_image_region defbi Yx Define rectan-
- gualar bit image
- region
+ define_bit_image_region defbi Yx Define rectangular
+ bit image region
device_type devt dv Indicate lan-
guage/codeset sup-
port
set_page_length slines YZ Set page length to
#1 lines
+
set_tb_margin smgtb MT Sets both top and
bottom margins to
#1, #2
- The XSI Curses standard added these. They are some
- post-4.1 versions of System V curses, e.g., Solaris 2.5
- and IRIX 6.x. The <STRONG>ncurses</STRONG> termcap names for them are
- invented; according to the XSI Curses standard, they have
- no termcap names. If your compiled terminfo entries use
- these, they may not be binary-compatible with System V
- terminfo entries after SVr4.1; beware!
+ The XSI Curses standard added these hardcopy capabili-
+ ties. They were used in some post-4.1 versions of System
+ V curses, e.g., Solaris 2.5 and IRIX 6.x. Except for <STRONG>YI</STRONG>,
+ the <STRONG>ncurses</STRONG> termcap names for them are invented. Accord-
+ ing to the XSI Curses standard, they have no termcap
+ names. If your compiled terminfo entries use these, they
+ may not be binary-compatible with System V terminfo
+ entries after SVr4.1; beware!
<STRONG>Variable</STRONG> <STRONG>Cap-</STRONG> <STRONG>TCap</STRONG> <STRONG>Description</STRONG>
set_a_attributes sgr1 sA Define second set of
video attributes
#1-#6
- set_pglen_inch slengthsL YI Set page length
- to #1 hundredth of
- an inch
-
- <STRONG>A</STRONG> <STRONG>Sample</STRONG> <STRONG>Entry</STRONG>
+ set_pglen_inch slengthYI Set page length to
+ #1 hundredth of an
+ inch (some implemen-
+ tations use sL for
+ termcap).
+
+
+</PRE><H3><a name="h3-User-Defined-Capabilities">User-Defined Capabilities</a></H3><PRE>
+ The preceding section listed the <EM>predefined</EM> capabilities.
+ They deal with some special features for terminals no
+ longer (or possibly never) produced. Occasionally there
+ are special features of newer terminals which are awkward
+ or impossible to represent by reusing the predefined capa-
+ bilities.
+
+ <STRONG>ncurses</STRONG> addresses this limitation by allowing user-defined
+ capabilities. The <STRONG>tic</STRONG> and <STRONG>infocmp</STRONG> programs provide the <STRONG>-x</STRONG>
+ option for this purpose. When <STRONG>-x</STRONG> is set, <STRONG>tic</STRONG> treats
+ unknown capabilities as user-defined. That is, if <STRONG>tic</STRONG>
+ encounters a capability name which it does not recognize,
+ it infers its type (boolean, number or string) from the
+ syntax and makes an extended table entry for that capabil-
+ ity. The <STRONG>use_extended_names</STRONG> function makes this informa-
+ tion conditionally available to applications. The ncurses
+ library provides the data leaving most of the behavior to
+ applications:
+
+ <STRONG>o</STRONG> User-defined capability strings whose name begins with
+ "k" are treated as function keys.
+
+ <STRONG>o</STRONG> The types (boolean, number, string) determined by <STRONG>tic</STRONG>
+ can be inferred by successful calls on <STRONG>tigetflag</STRONG>, etc.
+
+ <STRONG>o</STRONG> If the capability name happens to be two characters,
+ the capability is also available through the termcap
+ interface.
+
+ While termcap is said to be extensible because it does not
+ use a predefined set of capabilities, in practice it has
+ been limited to the capabilities defined by terminfo
+ implementations. As a rule, user-defined capabilities
+ intended for use by termcap applications should be limited
+ to booleans and numbers to avoid running past the 1023
+ byte limit assumed by termcap implementations and their
+ applications. In particular, providing extended sets of
+ function keys (past the 60 numbered keys and the handful
+ of special named keys) is best done using the longer names
+ available using terminfo.
+
+
+</PRE><H3><a name="h3-A-Sample-Entry">A Sample Entry</a></H3><PRE>
The following entry, describing an ANSI-standard terminal,
is representative of what a <STRONG>terminfo</STRONG> entry for a modern
terminal typically looks like.
- ansi|ansi/pc-term compatible with color,
- mc5i,
- colors#8, ncv#3, pairs#64,
- cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
- cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
- ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%p1%dG, ht=\E[I,
- ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, .indn=\E[%p1%dT,
- kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kf1=\E[M, kf10=\E[V,
- kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P,
- kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
- kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
- op=\E[37;40m, rep=%p1%c\E[%p2%{1}%-%db,
- rin=\E[%p1%dT, s0ds=\E(B, s1ds=\E)B, s2ds=\E*B,
- s3ds=\E+B, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p8%t;11%;%?%p9%t;12%;m,
- sgr0=\E[0;10m, tbc=\E[2g, u6=\E[%d;%dR, u7=\E[6n,
- u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%p1%dd,
+ ansi|ansi/pc-term compatible with color,
+ am, mc5i, mir, msgr,
+ colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260
+ j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303
+ u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, hpa=\E[%i%p1%dG, ht=\E[I, hts=\EH,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
+ mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, op=\E[39;49m,
+ rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rin=\E[%p1%dT,
+ rmacs=\E[10m, rmpch=\E[10m, rmso=\E[m, rmul=\E[m,
+ s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0;10%?%p1%t;7%;
+ %?%p2%t;4%;
+ %?%p3%t;7%;
+ %?%p4%t;5%;
+ %?%p6%t;1%;
+ %?%p7%t;8%;
+ %?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, smpch=\E[11m, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+ u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%i%p1%dd,
Entries may continue onto multiple lines by placing white
space at the beginning of each line except the first.
- Comments may be included on lines beginning with ``#''.
- Capabilities in <EM>terminfo</EM> are of three types: Boolean capa-
- bilities which indicate that the terminal has some partic-
- ular feature, numeric capabilities giving the size of the
- terminal or the size of particular delays, and string
- capabilities, which give a sequence which can be used to
- perform particular terminal operations.
+ Comments may be included on lines beginning with "#".
+ Capabilities in <EM>terminfo</EM> are of three types:
+
+ <STRONG>o</STRONG> Boolean capabilities which indicate that the terminal
+ has some particular feature,
+ <STRONG>o</STRONG> numeric capabilities giving the size of the terminal
+ or the size of particular delays, and
- <STRONG>Types</STRONG> <STRONG>of</STRONG> <STRONG>Capabilities</STRONG>
+ <STRONG>o</STRONG> string capabilities, which give a sequence which can
+ be used to perform particular terminal operations.
+
+
+</PRE><H3><a name="h3-Types-of-Capabilities">Types of Capabilities</a></H3><PRE>
All capabilities have names. For instance, the fact that
ANSI-standard terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an
automatic return and line-feed when the end of a line is
reached) is indicated by the capability <STRONG>am</STRONG>. Hence the
description of ansi includes <STRONG>am</STRONG>. Numeric capabilities are
- followed by the character `#' and then a positive value.
+ followed by the character "#" and then a positive value.
Thus <STRONG>cols</STRONG>, which indicates the number of columns the ter-
- minal has, gives the value `80' for ansi. Values for
+ minal has, gives the value "80" for ansi. Values for
numeric capabilities may be specified in decimal, octal or
hexadecimal, using the C programming language conventions
(e.g., 255, 0377 and 0xff or 0xFF).
Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear to
end of line sequence) are given by the two-character code,
- an `=', and then a string ending at the next following
- `,'.
+ an "=", and then a string ending at the next following
+ ",".
A number of escape sequences are provided in the string
valued capabilities for easy encoding of characters there.
Both <STRONG>\E</STRONG> and <STRONG>\e</STRONG> map to an ESCAPE character, <STRONG>^x</STRONG> maps to a
control-x for any appropriate x, and the sequences <STRONG>\n</STRONG> <STRONG>\l</STRONG>
<STRONG>\r</STRONG> <STRONG>\t</STRONG> <STRONG>\b</STRONG> <STRONG>\f</STRONG> <STRONG>\s</STRONG> give a newline, line-feed, return, tab,
- backspace, form-feed, and space. Other escapes include <STRONG>\^</STRONG>
- for <STRONG>^</STRONG>, <STRONG>\\</STRONG> for <STRONG>\</STRONG>, <STRONG>\</STRONG>, for comma, <STRONG>\:</STRONG> for <STRONG>:</STRONG>, and <STRONG>\0</STRONG> for null.
- (<STRONG>\0</STRONG> will produce \200, which does not terminate a string
- but behaves as a null character on most terminals, provid-
- ing CS7 is specified. See <STRONG><A HREF="stty.1.html">stty(1)</A></STRONG>.) Finally, characters
- may be given as three octal digits after a <STRONG>\</STRONG>.
+ backspace, form-feed, and space. Other escapes include
+
+ <STRONG>o</STRONG> <STRONG>\^</STRONG> for <STRONG>^</STRONG>,
+
+ <STRONG>o</STRONG> <STRONG>\\</STRONG> for <STRONG>\</STRONG>,
+
+ <STRONG>o</STRONG> <STRONG>\</STRONG>, for comma,
+
+ <STRONG>o</STRONG> <STRONG>\:</STRONG> for <STRONG>:</STRONG>,
+
+ <STRONG>o</STRONG> and <STRONG>\0</STRONG> for null.
+
+ <STRONG>\0</STRONG> will produce \200, which does not terminate a
+ string but behaves as a null character on most termi-
+ nals, providing CS7 is specified. See <STRONG>stty(1)</STRONG>.
+
+ The reason for this quirk is to maintain binary com-
+ patibility of the compiled terminfo files with other
+ implementations, e.g., the SVr4 systems, which docu-
+ ment this. Compiled terminfo files use null-termi-
+ nated strings, with no lengths. Modifying this would
+ require a new binary format, which would not work with
+ other implementations.
+
+ Finally, characters may be given as three octal digits
+ after a <STRONG>\</STRONG>.
A delay in milliseconds may appear anywhere in a string
capability, enclosed in $<..> brackets, as in <STRONG>el</STRONG>=\EK$<5>,
and padding characters are supplied by <EM>tputs</EM> to provide
this delay. The delay must be a number with at most one
decimal place of precision; it may be followed by suffixes
- `*' or '/' or both. A `*' indicates that the padding
+ "*" or "/" or both. A "*" indicates that the padding
required is proportional to the number of lines affected
by the operation, and the amount given is the per-
affected-unit padding required. (In the case of insert
character, the factor is still the number of <EM>lines</EM>
affected.) Normally, padding is advisory if the device
has the <STRONG>xon</STRONG> capability; it is used for cost computation
- but does not trigger delays. A `/' suffix indicates that
+ but does not trigger delays. A "/" suffix indicates that
the padding is mandatory and forces a delay of the given
number of milliseconds even on devices for which <STRONG>xon</STRONG> is
present to indicate flow control.
example, see the second <STRONG>ind</STRONG> in the example above.
- <STRONG>Fetching</STRONG> <STRONG>Compiled</STRONG> <STRONG>Descriptions</STRONG>
- If the environment variable TERMINFO is set, it is inter-
- preted as the pathname of a directory containing the com-
- piled description you are working on. Only that directory
- is searched.
-
- If TERMINFO is not set, the <STRONG>ncurses</STRONG> version of the ter-
- minfo reader code will instead look in the directory
- <STRONG>$HOME/.terminfo</STRONG> for a compiled description. If it fails
- to find one there, and the environment variable TER-
- MINFO_DIRS is set, it will interpret the contents of that
- variable as a list of colon- separated directories to be
- searched (an empty entry is interpreted as a command to
- search <EM>/usr/share/terminfo</EM>). If no description is found
- in any of the TERMINFO_DIRS directories, the fetch fails.
-
- If neither TERMINFO nor TERMINFO_DIRS is set, the last
- place tried will be the system terminfo directory,
- <EM>/usr/share/terminfo</EM>.
-
- (Neither the <STRONG>$HOME/.terminfo</STRONG> lookups nor TERMINFO_DIRS
- extensions are supported under stock System V ter-
- minfo/curses.)
-
-
- <STRONG>Preparing</STRONG> <STRONG>Descriptions</STRONG>
- We now outline how to prepare descriptions of terminals.
- The most effective way to prepare a terminal description
- is by imitating the description of a similar terminal in
- <EM>terminfo</EM> and to build up a description gradually, using
+</PRE><H3><a name="h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></H3><PRE>
+ The <STRONG>ncurses</STRONG> library searches for terminal descriptions in
+ several places. It uses only the first description found.
+ The library has a compiled-in list of places to search
+ which can be overridden by environment variables. Before
+ starting to search, <STRONG>ncurses</STRONG> eliminates duplicates in its
+ search list.
+
+ <STRONG>o</STRONG> If the environment variable TERMINFO is set, it is
+ interpreted as the pathname of a directory containing
+ the compiled description you are working on. Only
+ that directory is searched.
+
+ <STRONG>o</STRONG> If TERMINFO is not set, <STRONG>ncurses</STRONG> will instead look in
+ the directory <STRONG>$HOME/.terminfo</STRONG> for a compiled descrip-
+ tion.
+
+ <STRONG>o</STRONG> Next, if the environment variable TERMINFO_DIRS is
+ set, <STRONG>ncurses</STRONG> will interpret the contents of that vari-
+ able as a list of colon-separated directories (or
+ database files) to be searched.
+
+ An empty directory name (i.e., if the variable begins
+ or ends with a colon, or contains adjacent colons) is
+ interpreted as the system location <EM>/usr/share/ter-</EM>
+ <EM>minfo</EM>.
+
+ <STRONG>o</STRONG> Finally, <STRONG>ncurses</STRONG> searches these compiled-in locations:
+
+ <STRONG>o</STRONG> a list of directories
+ (/usr/local/ncurses/share/terminfo:/usr/share/ter-
+ minfo), and
+
+ <STRONG>o</STRONG> the system terminfo directory, <EM>/usr/share/terminfo</EM>
+ (the compiled-in default).
+
+
+</PRE><H3><a name="h3-Preparing-Descriptions">Preparing Descriptions</a></H3><PRE>
+ We now outline how to prepare descriptions of terminals.
+ The most effective way to prepare a terminal description
+ is by imitating the description of a similar terminal in
+ <EM>terminfo</EM> and to build up a description gradually, using
partial descriptions with <EM>vi</EM> or some other screen-oriented
- program to check that they are correct. Be aware that a
+ program to check that they are correct. Be aware that a
very unusual terminal may expose deficiencies in the abil-
- ity of the <EM>terminfo</EM> file to describe it or bugs in the
+ ity of the <EM>terminfo</EM> file to describe it or bugs in the
screen-handling code of the test program.
- To get the padding for insert line right (if the terminal
+ To get the padding for insert line right (if the terminal
manufacturer did not document it) a severe test is to edit
- a large file at 9600 baud, delete 16 or so lines from the
- middle of the screen, then hit the `u' key several times
- quickly. If the terminal messes up, more padding is usu-
- ally needed. A similar test can be used for insert char-
+ a large file at 9600 baud, delete 16 or so lines from the
+ middle of the screen, then hit the "u" key several times
+ quickly. If the terminal messes up, more padding is usu-
+ ally needed. A similar test can be used for insert char-
acter.
- <STRONG>Basic</STRONG> <STRONG>Capabilities</STRONG>
- The number of columns on each line for the terminal is
- given by the <STRONG>cols</STRONG> numeric capability. If the terminal is
- a CRT, then the number of lines on the screen is given by
+</PRE><H3><a name="h3-Basic-Capabilities">Basic Capabilities</a></H3><PRE>
+ The number of columns on each line for the terminal is
+ given by the <STRONG>cols</STRONG> numeric capability. If the terminal is
+ a CRT, then the number of lines on the screen is given by
the <STRONG>lines</STRONG> capability. If the terminal wraps around to the
- beginning of the next line when it reaches the right mar-
+ beginning of the next line when it reaches the right mar-
gin, then it should have the <STRONG>am</STRONG> capability. If the termi-
- nal can clear its screen, leaving the cursor in the home
- position, then this is given by the <STRONG>clear</STRONG> string capabil-
- ity. If the terminal overstrikes (rather than clearing a
- position when a character is struck over) then it should
- have the <STRONG>os</STRONG> capability. If the terminal is a printing
- terminal, with no soft copy unit, give it both <STRONG>hc</STRONG> and <STRONG>os</STRONG>.
- (<STRONG>os</STRONG> applies to storage scope terminals, such as TEKTRONIX
- 4010 series, as well as hard copy and APL terminals.) If
+ nal can clear its screen, leaving the cursor in the home
+ position, then this is given by the <STRONG>clear</STRONG> string capabil-
+ ity. If the terminal overstrikes (rather than clearing a
+ position when a character is struck over) then it should
+ have the <STRONG>os</STRONG> capability. If the terminal is a printing
+ terminal, with no soft copy unit, give it both <STRONG>hc</STRONG> and <STRONG>os</STRONG>.
+ (<STRONG>os</STRONG> applies to storage scope terminals, such as TEKTRONIX
+ 4010 series, as well as hard copy and APL terminals.) If
there is a code to move the cursor to the left edge of the
current row, give this as <STRONG>cr</STRONG>. (Normally this will be car-
- riage return, control M.) If there is a code to produce
+ riage return, control M.) If there is a code to produce
an audible signal (bell, beep, etc) give this as <STRONG>bel</STRONG>.
- If there is a code to move the cursor one position to the
- left (such as backspace) that capability should be given
- as <STRONG>cub1</STRONG>. Similarly, codes to move to the right, up, and
+ If there is a code to move the cursor one position to the
+ left (such as backspace) that capability should be given
+ as <STRONG>cub1</STRONG>. Similarly, codes to move to the right, up, and
down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and <STRONG>cud1</STRONG>. These local
- cursor motions should not alter the text they pass over,
- for example, you would not normally use `<STRONG>cuf1</STRONG>= ' because
+ cursor motions should not alter the text they pass over,
+ for example, you would not normally use "<STRONG>cuf1</STRONG>= " because
the space would erase the character moved over.
- A very important point here is that the local cursor
- motions encoded in <EM>terminfo</EM> are undefined at the left and
- top edges of a CRT terminal. Programs should never
- attempt to backspace around the left edge, unless <STRONG>bw</STRONG> is
+ A very important point here is that the local cursor
+ motions encoded in <EM>terminfo</EM> are undefined at the left and
+ top edges of a CRT terminal. Programs should never
+ attempt to backspace around the left edge, unless <STRONG>bw</STRONG> is
given, and never attempt to go up locally off the top. In
- order to scroll text up, a program will go to the bottom
+ order to scroll text up, a program will go to the bottom
left corner of the screen and send the <STRONG>ind</STRONG> (index) string.
To scroll text down, a program goes to the top left corner
described as
33|tty33|tty|model 33 teletype,
- bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
+ bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
while the Lear Siegler ADM-3 is described as
adm3|3|lsi adm3,
- am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H, cud1=^J,
- ind=^J, lines#24,
+ am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H, cud1=^J,
+ ind=^J, lines#24,
- <STRONG>Parameterized</STRONG> <STRONG>Strings</STRONG>
+</PRE><H3><a name="h3-Parameterized-Strings">Parameterized Strings</a></H3><PRE>
Cursor addressing and other strings requiring parameters
in the terminal are described by a parameterized string
- capability, with <STRONG><A HREF="printf.3S.html">printf(3S)</A></STRONG> like escapes <STRONG>%x</STRONG> in it. For
- example, to address the cursor, the <STRONG>cup</STRONG> capability is
+ capability, with <EM>printf</EM>-like escapes such as <EM>%x</EM> in it.
+ For example, to address the cursor, the <STRONG>cup</STRONG> capability is
given, using two parameters: the row and column to address
to. (Rows and columns are numbered from zero and refer to
the physical screen visible to the user, not to any unseen
The <STRONG>%</STRONG> encodings have the following meanings:
+ <STRONG>%%</STRONG> outputs "%"
- %% outputs `%'
-
- %<EM>[[</EM>:<EM>]flags][width[.precision]][</EM>doxXs<EM>]</EM>
- as in <STRONG>printf</STRONG>, flags are [-+#] and space
+ <STRONG>%</STRONG><EM>[[</EM>:<EM>]flags][width[.precision]][</EM><STRONG>doxXs</STRONG><EM>]</EM>
+ as in <STRONG>printf</STRONG>, flags are <EM>[-+#]</EM> and <EM>space</EM>. Use a ":"
+ to allow the next character to be a "-" flag, avoid-
+ ing interpreting "%-" as an operator.
%c print pop() like %c in <STRONG>printf</STRONG>
- %s print pop() like %s in <STRONG>printf</STRONG>
+ <STRONG>%s</STRONG> print pop() like %s in <STRONG>printf</STRONG>
- %p[1-9]
+ <STRONG>%p</STRONG><EM>[1-9]</EM>
push <EM>i</EM>'th parameter
- %P[a-z]
- set dynamic variable [a-z] to pop()
+ <STRONG>%P</STRONG><EM>[a-z]</EM>
+ set dynamic variable <EM>[a-z]</EM> to pop()
- %g[a-z]
- get dynamic variable [a-z] and push it
+ <STRONG>%g</STRONG><EM>[a-z]/</EM>
+ get dynamic variable <EM>[a-z]</EM> and push it
- %P[A-Z]
- set static variable [a-z] to pop()
+ <STRONG>%P</STRONG><EM>[A-Z]</EM>
+ set static variable <EM>[a-z]</EM> to <EM>pop()</EM>
- %g[A-Z]
- get static variable [a-z] and push it
+ <STRONG>%g</STRONG><EM>[A-Z]</EM>
+ get static variable <EM>[a-z]</EM> and push it
The terms "static" and "dynamic" are misleading.
Historically, these are simply two different sets of
other implementations. Relying on it will adversely
impact portability to other implementations.
- %'<EM>c</EM>' char constant <EM>c</EM>
+ <STRONG>%'</STRONG><EM>c</EM><STRONG>'</STRONG> char constant <EM>c</EM>
- %{<EM>nn</EM>}
+ <STRONG>%{</STRONG><EM>nn</EM><STRONG>}</STRONG>
integer constant <EM>nn</EM>
- %l push strlen(pop)
+ <STRONG>%l</STRONG> push strlen(pop)
- %+ %- %* %/ %m
- arithmetic (%m is mod): push(pop() op pop())
+ <STRONG>%+</STRONG>, <STRONG>%-</STRONG>, <STRONG>%*</STRONG>, <STRONG>%/</STRONG>, <STRONG>%m</STRONG>
+ arithmetic (%m is mod): <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
- %& %| %^
- bit operations (AND, OR and exclusive-OR): push(pop()
- op pop())
+ <STRONG>%&</STRONG>, <STRONG>%|</STRONG>, <STRONG>%^</STRONG>
+ bit operations (AND, OR and exclusive-OR): <EM>push(pop()</EM>
+ <EM>op</EM> <EM>pop())</EM>
- %= %> %<
- logical operations: push(pop() op pop())
+ <STRONG>%=</STRONG>, <STRONG>%></STRONG>, <STRONG>%<</STRONG>
+ logical operations: <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
- %A, %O
+ <STRONG>%A</STRONG>, <STRONG>%O</STRONG>
logical AND and OR operations (for conditionals)
- %! %~
+ <STRONG>%!</STRONG>, <STRONG>%~</STRONG>
unary operations (logical and bit complement):
push(op pop())
- %i add 1 to first two parameters (for ANSI terminals)
+ <STRONG>%i</STRONG> add 1 to first two parameters (for ANSI terminals)
- %? <EM>expr</EM> %t <EM>thenpart</EM> %e <EM>elsepart</EM> %;
- This forms an if-then-else. The %e <EM>elsepart</EM> is
- optional. Usually the %? <EM>expr</EM> part pushes a value
- onto the stack, and %t pops it from the stack, test-
+ <STRONG>%?</STRONG> <EM>expr</EM> <STRONG>%t</STRONG> <EM>thenpart</EM> <STRONG>%e</STRONG> <EM>elsepart</EM> <STRONG>%;</STRONG>
+ This forms an if-then-else. The <STRONG>%e</STRONG> <EM>elsepart</EM> is
+ optional. Usually the <STRONG>%?</STRONG> <EM>expr</EM> part pushes a value
+ onto the stack, and <STRONG>%t</STRONG> pops it from the stack, test-
ing if it is nonzero (true). If it is zero (false),
- control passes to the %e (else) part.
+ control passes to the <STRONG>%e</STRONG> (else) part.
It is possible to form else-if's a la Algol 68:
- %? c1 %t b1 %e c2 %t b2 %e c3 %t b3 %e c4 %t b4 %e %;
+ <STRONG>%?</STRONG> c1 <STRONG>%t</STRONG> b1 <STRONG>%e</STRONG> c2 <STRONG>%t</STRONG> b2 <STRONG>%e</STRONG> c3 <STRONG>%t</STRONG> b3 <STRONG>%e</STRONG> c4 <STRONG>%t</STRONG> b4 <STRONG>%e</STRONG> <STRONG>%;</STRONG>
where ci are conditions, bi are bodies.
Use the <STRONG>-f</STRONG> option of <STRONG>tic</STRONG> or <STRONG>infocmp</STRONG> to see the struc-
- ture of if-the-else's. Some strings, e.g., <STRONG>sgr</STRONG> can
+ ture of if-then-else's. Some strings, e.g., <STRONG>sgr</STRONG> can
be very complicated when written on one line. The <STRONG>-f</STRONG>
- option splits the string into lines with the parts
+ option splits the string into lines with the parts
indented.
Binary operations are in postfix form with the operands in
- the usual order. That is, to get x-5 one would use
- "%gx%{5}%-". %P and %g variables are persistent across
+ the usual order. That is, to get x-5 one would use
+ "%gx%{5}%-". <STRONG>%P</STRONG> and <STRONG>%g</STRONG> variables are persistent across
escape-string evaluations.
Consider the HP2645, which, to get to row 3 and column 12,
- needs to be sent \E&a12c03Y padded for 6 milliseconds.
- Note that the order of the rows and columns is inverted
- here, and that the row and column are printed as two dig-
+ needs to be sent \E&a12c03Y padded for 6 milliseconds.
+ Note that the order of the rows and columns is inverted
+ here, and that the row and column are printed as two dig-
its. Thus its <STRONG>cup</STRONG> capability is "cup=6\E&%p2%2dc%p1%2dY".
The Microterm ACT-IV needs the current row and column sent
A final example is the LSI ADM-3a, which uses row and col-
umn offset by a blank character, thus "cup=\E=%p1%'
- '%+%c%p2%' '%+%c". After sending `\E=', this pushes the
+ '%+%c%p2%' '%+%c". After sending "\E=", this pushes the
first parameter, pushes the ASCII value for a space (32),
adds them (pushing the sum on the stack in place of the
two previous values) and outputs that value as a charac-
More complex arithmetic is possible using the stack.
- <STRONG>Cursor</STRONG> <STRONG>Motions</STRONG>
+</PRE><H3><a name="h3-Cursor-Motions">Cursor Motions</a></H3><PRE>
If the terminal has a fast way to home the cursor (to very
upper left corner of screen) then this can be given as
<STRONG>home</STRONG>; similarly a fast way of getting to the lower left-
<STRONG>rmcup</STRONG>), specify <STRONG>nrrmc</STRONG>.
- <STRONG>Area</STRONG> <STRONG>Clears</STRONG>
+</PRE><H3><a name="h3-Area-Clears">Area Clears</a></H3><PRE>
If the terminal can clear from the current position to the
end of the line, leaving the cursor where it is, this
should be given as <STRONG>el</STRONG>. If the terminal can clear from the
number of lines, if a true <STRONG>ed</STRONG> is not available.)
- <STRONG>Insert/delete</STRONG> <STRONG>line</STRONG> <STRONG>and</STRONG> <STRONG>vertical</STRONG> <STRONG>motions</STRONG>
+</PRE><H3><a name="h3-Insert_delete-line-and-vertical-motions">Insert/delete line and vertical motions</a></H3><PRE>
If the terminal can open a new blank line before the line
where the cursor is, this should be given as <STRONG>il1</STRONG>; this is
done only from the first position of a line. The cursor
bring down non-blank lines.
- <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
+</PRE><H3><a name="h3-Insert_Delete-Character">Insert/Delete Character</a></H3><PRE>
There are two basic kinds of intelligent terminals with
respect to insert/delete character which can be described
using <EM>terminfo.</EM> The most common insert/delete character
Elmer Owl, make a distinction between typed and untyped
blanks on the screen, shifting upon an insert or delete
only to an untyped blank on the screen which is either
- eliminated, or expanded to two untyped blanks. You can
- determine the kind of terminal you have by clearing the
- screen and then typing text separated by cursor motions.
- Type "abc def" using local cursor motions (not spaces)
- between the "abc" and the "def". Then position the cursor
- before the "abc" and put the terminal in insert mode. If
- typing characters causes the rest of the line to shift
- rigidly and characters to fall off the end, then your ter-
- minal does not distinguish between blanks and untyped
- positions. If the "abc" shifts over to the "def" which
- then move together around the end of the current line and
- onto the next as you insert, you have the second type of
- terminal, and should give the capability <STRONG>in</STRONG>, which stands
- for "insert null". While these are two logically separate
- attributes (one line versus multi-line insert mode, and
- special treatment of untyped spaces) we have seen no ter-
- minals whose insert mode cannot be described with the sin-
- gle attribute.
+ eliminated, or expanded to two untyped blanks.
+
+ You can determine the kind of terminal you have by clear-
+ ing the screen and then typing text separated by cursor
+ motions. Type "abc def" using local cursor motions
+ (not spaces) between the "abc" and the "def". Then posi-
+ tion the cursor before the "abc" and put the terminal in
+ insert mode. If typing characters causes the rest of the
+ line to shift rigidly and characters to fall off the end,
+ then your terminal does not distinguish between blanks and
+ untyped positions. If the "abc" shifts over to the "def"
+ which then move together around the end of the current
+ line and onto the next as you insert, you have the second
+ type of terminal, and should give the capability <STRONG>in</STRONG>, which
+ stands for "insert null".
+
+ While these are two logically separate attributes (one
+ line versus multi-line insert mode, and special treatment
+ of untyped spaces) we have seen no terminals whose insert
+ mode cannot be described with the single attribute.
Terminfo can describe both terminals which have an insert
mode, and terminals which send a simple sequence to open a
milliseconds in <STRONG>ip</STRONG> (a string option). Any other sequence
which may need to be sent after an insert of a single
character may also be given in <STRONG>ip</STRONG>. If your terminal needs
- both to be placed into an `insert mode' and a special code
+ both to be placed into an "insert mode" and a special code
to precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG>
and <STRONG>ich1</STRONG> can be given, and both will be used. The <STRONG>ich</STRONG>
capability, with one parameter, <EM>n</EM>, will repeat the effects
of <STRONG>ich1</STRONG> <EM>n</EM> times.
If padding is necessary between characters typed while not
- in insert mode, give this as a number of milliseconds
- padding in <STRONG>rmp</STRONG>.
+ in insert mode, give this as a number of milliseconds pad-
+ ding in <STRONG>rmp</STRONG>.
It is occasionally necessary to move around while in
insert mode to delete characters on the same line (e.g.,
with one parameter.
- <STRONG>Highlighting,</STRONG> <STRONG>Underlining,</STRONG> <STRONG>and</STRONG> <STRONG>Visible</STRONG> <STRONG>Bells</STRONG>
+</PRE><H3><a name="h3-Highlighting_-Underlining_-and-Visible-Bells">Highlighting, Underlining, and Visible Bells</a></H3><PRE>
If your terminal has one or more kinds of display
attributes, these can be represented in a number of dif-
ferent ways. You should choose one display form as <EM>stand-</EM>
plus half-bright is good, or reverse video alone.) The
sequences to enter and exit standout mode are given as
<STRONG>smso</STRONG> and <STRONG>rmso</STRONG>, respectively. If the code to change into
- or out of standout mode leaves one or even two blank
- spaces on the screen, as the TVI 912 and Teleray 1061 do,
+ or out of standout mode leaves one or even two blank spa-
+ ces on the screen, as the TVI 912 and Teleray 1061 do,
then <STRONG>xmc</STRONG> should be given to tell how many spaces are left.
- Codes to begin underlining and end underlining can be
- given as <STRONG>smul</STRONG> and <STRONG>rmul</STRONG> respectively. If the terminal has
- a code to underline the current character and move the
+ Codes to begin underlining and end underlining can be
+ given as <STRONG>smul</STRONG> and <STRONG>rmul</STRONG> respectively. If the terminal has
+ a code to underline the current character and move the
cursor one space to the right, such as the Microterm Mime,
this can be given as <STRONG>uc</STRONG>.
- Other capabilities to enter various highlighting modes
- include <STRONG>blink</STRONG> (blinking) <STRONG>bold</STRONG> (bold or extra bright) <STRONG>dim</STRONG>
- (dim or half-bright) <STRONG>invis</STRONG> (blanking or invisible text)
- <STRONG>prot</STRONG> (protected) <STRONG>rev</STRONG> (reverse video) <STRONG>sgr0</STRONG> (turn off <EM>all</EM>
- attribute modes) <STRONG>smacs</STRONG> (enter alternate character set
- mode) and <STRONG>rmacs</STRONG> (exit alternate character set mode).
- Turning on any of these modes singly may or may not turn
+ Other capabilities to enter various highlighting modes
+ include <STRONG>blink</STRONG> (blinking) <STRONG>bold</STRONG> (bold or extra bright) <STRONG>dim</STRONG>
+ (dim or half-bright) <STRONG>invis</STRONG> (blanking or invisible text)
+ <STRONG>prot</STRONG> (protected) <STRONG>rev</STRONG> (reverse video) <STRONG>sgr0</STRONG> (turn off <EM>all</EM>
+ attribute modes) <STRONG>smacs</STRONG> (enter alternate character set
+ mode) and <STRONG>rmacs</STRONG> (exit alternate character set mode).
+ Turning on any of these modes singly may or may not turn
off other modes.
- If there is a sequence to set arbitrary combinations of
- modes, this should be given as <STRONG>sgr</STRONG> (set attributes), tak-
- ing 9 parameters. Each parameter is either 0 or nonzero,
+ If there is a sequence to set arbitrary combinations of
+ modes, this should be given as <STRONG>sgr</STRONG> (set attributes), tak-
+ ing 9 parameters. Each parameter is either 0 or nonzero,
as the corresponding attribute is on or off. The 9 param-
- eters are, in order: standout, underline, reverse, blink,
- dim, bold, blank, protect, alternate character set. Not
- all modes need be supported by <STRONG>sgr</STRONG>, only those for which
+ eters are, in order: standout, underline, reverse, blink,
+ dim, bold, blank, protect, alternate character set. Not
+ all modes need be supported by <STRONG>sgr</STRONG>, only those for which
corresponding separate attribute commands exist.
For example, the DEC vt220 supports most of the modes:
-
- <STRONG>tparm</STRONG> <STRONG>parameter</STRONG> <STRONG>attribute</STRONG> <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
-
- none none \E[0m
- p1 standout \E[0;1;7m
- p2 underline \E[0;4m
- p3 reverse \E[0;7m
- p4 blink \E[0;5m
- p5 dim not available
- p6 bold \E[0;1m
- p7 invis \E[0;8m
- p8 protect not used
- p9 altcharset ^O (off) ^N (on)
-
- We begin each escape sequence by turning off any existing
- modes, since there is no quick way to determine whether
+ <STRONG>tparm</STRONG> <STRONG>parameter</STRONG> <STRONG>attribute</STRONG> <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
+
+ none none \E[0m
+ p1 standout \E[0;1;7m
+ p2 underline \E[0;4m
+ p3 reverse \E[0;7m
+ p4 blink \E[0;5m
+ p5 dim not available
+ p6 bold \E[0;1m
+ p7 invis \E[0;8m
+ p8 protect not used
+ p9 altcharset ^O (off) ^N (on)
+
+ We begin each escape sequence by turning off any existing
+ modes, since there is no quick way to determine whether
they are active. Standout is set up to be the combination
- of reverse and bold. The vt220 terminal has a protect
- mode, though it is not commonly used in sgr because it
- protects characters on the screen from the host's era-
- sures. The altcharset mode also is different in that it
- is either ^O or ^N, depending on whether it is off or on.
- If all modes are turned on, the resulting sequence is
+ of reverse and bold. The vt220 terminal has a protect
+ mode, though it is not commonly used in sgr because it
+ protects characters on the screen from the host's era-
+ sures. The altcharset mode also is different in that it
+ is either ^O or ^N, depending on whether it is off or on.
+ If all modes are turned on, the resulting sequence is
\E[0;1;4;5;7;8m^N.
- Some sequences are common to different modes. For exam-
- ple, ;7 is output when either p1 or p3 is true, that is,
+ Some sequences are common to different modes. For exam-
+ ple, ;7 is output when either p1 or p3 is true, that is,
if either standout or reverse modes are turned on.
- Writing out the above sequences, along with their depen-
+ Writing out the above sequences, along with their depen-
dencies yields
+ <STRONG>sequence</STRONG> <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG> <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
- <STRONG>sequence</STRONG> <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG> <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
-
- \E[0 always \E[0
- ;1 if p1 or p6 %?%p1%p6%|%t;1%;
- ;4 if p2 %?%p2%|%t;4%;
- ;5 if p4 %?%p4%|%t;5%;
- ;7 if p1 or p3 %?%p1%p3%|%t;7%;
- ;8 if p7 %?%p7%|%t;8%;
-
- m always m
- ^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;
+ \E[0 always \E[0
+ ;1 if p1 or p6 %?%p1%p6%|%t;1%;
+ ;4 if p2 %?%p2%|%t;4%;
+ ;5 if p4 %?%p4%|%t;5%;
+ ;7 if p1 or p3 %?%p1%p3%|%t;7%;
+ ;8 if p7 %?%p7%|%t;8%;
+ m always m
+ ^N or ^O if p9 ^N, else ^O %?%p9%t^N%e^O%;
Putting this all together into the sgr sequence gives:
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;
- %?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p4%t;5%;
+ %?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- Remember that if you specify sgr, you must also specify
- sgr0. Also, some implementations rely on sgr being given
- if sgr0 is, Not all terminfo entries necessarily have an
- sgr string, however. Many terminfo entries are derived
- from termcap entries which have no sgr string. The only
- drawback to adding an sgr string is that termcap also
- assumes that sgr0 does not exit alternate character set
+ Remember that if you specify sgr, you must also specify
+ sgr0. Also, some implementations rely on sgr being given
+ if sgr0 is, Not all terminfo entries necessarily have an
+ sgr string, however. Many terminfo entries are derived
+ from termcap entries which have no sgr string. The only
+ drawback to adding an sgr string is that termcap also
+ assumes that sgr0 does not exit alternate character set
mode.
- Terminals with the ``magic cookie'' glitch (<STRONG>xmc</STRONG>) deposit
- special ``cookies'' when they receive mode-setting
- sequences, which affect the display algorithm rather than
- having extra bits for each character. Some terminals,
- such as the HP 2621, automatically leave standout mode
- when they move to a new line or the cursor is addressed.
- Programs using standout mode should exit standout mode
- before moving the cursor or sending a newline, unless the
- <STRONG>msgr</STRONG> capability, asserting that it is safe to move in
+ Terminals with the "magic cookie" glitch (<STRONG>xmc</STRONG>) deposit
+ special "cookies" when they receive mode-setting
+ sequences, which affect the display algorithm rather than
+ having extra bits for each character. Some terminals,
+ such as the HP 2621, automatically leave standout mode
+ when they move to a new line or the cursor is addressed.
+ Programs using standout mode should exit standout mode
+ before moving the cursor or sending a newline, unless the
+ <STRONG>msgr</STRONG> capability, asserting that it is safe to move in
standout mode, is present.
- If the terminal has a way of flashing the screen to indi-
- cate an error quietly (a bell replacement) then this can
+ If the terminal has a way of flashing the screen to indi-
+ cate an error quietly (a bell replacement) then this can
be given as <STRONG>flash</STRONG>; it must not move the cursor.
- If the cursor needs to be made more visible than normal
+ If the cursor needs to be made more visible than normal
when it is not on the bottom line (to make, for example, a
- non-blinking underline into an easier to find block or
+ non-blinking underline into an easier to find block or
blinking underline) give this sequence as <STRONG>cvvis</STRONG>. If there
- is a way to make the cursor completely invisible, give
+ is a way to make the cursor completely invisible, give
that as <STRONG>civis</STRONG>. The capability <STRONG>cnorm</STRONG> should be given which
undoes the effects of both of these modes.
If your terminal correctly generates underlined characters
- (with no special codes needed) even though it does not
- overstrike, then you should give the capability <STRONG>ul</STRONG>. If a
- character overstriking another leaves both characters on
+ (with no special codes needed) even though it does not
+ overstrike, then you should give the capability <STRONG>ul</STRONG>. If a
+ character overstriking another leaves both characters on
the screen, specify the capability <STRONG>os</STRONG>. If overstrikes are
- erasable with a blank, then this should be indicated by
+ erasable with a blank, then this should be indicated by
giving <STRONG>eo</STRONG>.
- <STRONG>Keypad</STRONG> <STRONG>and</STRONG> <STRONG>Function</STRONG> <STRONG>Keys</STRONG>
+</PRE><H3><a name="h3-Keypad-and-Function-Keys">Keypad and Function Keys</a></H3><PRE>
If the terminal has a keypad that transmits codes when the
- keys are pressed, this information can be given. Note
+ keys are pressed, this information can be given. Note
that it is not possible to handle terminals where the key-
pad only works in local (this applies, for example, to the
- unshifted HP 2621 keys). If the keypad can be set to
- transmit or not transmit, give these codes as <STRONG>smkx</STRONG> and
+ unshifted HP 2621 keys). If the keypad can be set to
+ transmit or not transmit, give these codes as <STRONG>smkx</STRONG> and
<STRONG>rmkx</STRONG>. Otherwise the keypad is assumed to always transmit.
+
The codes sent by the left arrow, right arrow, up arrow,
down arrow, and home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG>
<STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG> respectively. If there are func-
tion keys such as f0, f1, ..., f10, the codes they send
can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>. If these keys have
labels other than the default f0 through f10, the labels
- can be given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>. The codes transmit-
- ted by certain other special keys can be given: <STRONG>kll</STRONG> (home
- down), <STRONG>kbs</STRONG> (backspace), <STRONG>ktbc</STRONG> (clear all tabs), <STRONG>kctab</STRONG>
- (clear the tab stop in this column), <STRONG>kclr</STRONG> (clear screen or
- erase key), <STRONG>kdch1</STRONG> (delete character), <STRONG>kdl1</STRONG> (delete line),
- <STRONG>krmir</STRONG> (exit insert mode), <STRONG>kel</STRONG> (clear to end of line), <STRONG>ked</STRONG>
- (clear to end of screen), <STRONG>kich1</STRONG> (insert character or enter
- insert mode), <STRONG>kil1</STRONG> (insert line), <STRONG>knp</STRONG> (next page), <STRONG>kpp</STRONG>
- (previous page), <STRONG>kind</STRONG> (scroll forward/down), <STRONG>kri</STRONG> (scroll
- backward/up), <STRONG>khts</STRONG> (set a tab stop in this column). In
- addition, if the keypad has a 3 by 3 array of keys includ-
- ing the four arrow keys, the other five keys can be given
- as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>, <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>. These keys are useful
- when the effects of a 3 by 3 directional pad are needed.
+ can be given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>.
+
+ The codes transmitted by certain other special keys can be
+ given:
+
+ <STRONG>o</STRONG> <STRONG>kll</STRONG> (home down),
+
+ <STRONG>o</STRONG> <STRONG>kbs</STRONG> (backspace),
+
+ <STRONG>o</STRONG> <STRONG>ktbc</STRONG> (clear all tabs),
+
+ <STRONG>o</STRONG> <STRONG>kctab</STRONG> (clear the tab stop in this column),
+
+ <STRONG>o</STRONG> <STRONG>kclr</STRONG> (clear screen or erase key),
+
+ <STRONG>o</STRONG> <STRONG>kdch1</STRONG> (delete character),
+
+ <STRONG>o</STRONG> <STRONG>kdl1</STRONG> (delete line),
+
+ <STRONG>o</STRONG> <STRONG>krmir</STRONG> (exit insert mode),
+
+ <STRONG>o</STRONG> <STRONG>kel</STRONG> (clear to end of line),
+
+ <STRONG>o</STRONG> <STRONG>ked</STRONG> (clear to end of screen),
+
+ <STRONG>o</STRONG> <STRONG>kich1</STRONG> (insert character or enter insert mode),
+
+ <STRONG>o</STRONG> <STRONG>kil1</STRONG> (insert line),
+
+ <STRONG>o</STRONG> <STRONG>knp</STRONG> (next page),
+
+ <STRONG>o</STRONG> <STRONG>kpp</STRONG> (previous page),
+
+ <STRONG>o</STRONG> <STRONG>kind</STRONG> (scroll forward/down),
+
+ <STRONG>o</STRONG> <STRONG>kri</STRONG> (scroll backward/up),
+
+ <STRONG>o</STRONG> <STRONG>khts</STRONG> (set a tab stop in this column).
+
+ In addition, if the keypad has a 3 by 3 array of keys
+ including the four arrow keys, the other five keys can be
+ given as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>, <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>. These keys are use-
+ ful when the effects of a 3 by 3 directional pad are
+ needed.
Strings to program function keys can be given as <STRONG>pfkey</STRONG>,
<STRONG>pfloc</STRONG>, and <STRONG>pfx</STRONG>. A string to program screen labels should
visible.
- <STRONG>Tabs</STRONG> <STRONG>and</STRONG> <STRONG>Initialization</STRONG>
+</PRE><H3><a name="h3-Tabs-and-Initialization">Tabs and Initialization</a></H3><PRE>
If the terminal has hardware tabs, the command to advance
to the next tab stop can be given as <STRONG>ht</STRONG> (usually control
- I). A ``back-tab'' command which moves leftward to the
- preceding tab stop can be given as <STRONG>cbt</STRONG>. By convention, if
+ I). A "back-tab" command which moves leftward to the pre-
+ ceding tab stop can be given as <STRONG>cbt</STRONG>. By convention, if
the teletype modes indicate that tabs are being expanded
by the computer rather than being sent to the terminal,
programs should not use <STRONG>ht</STRONG> or <STRONG>cbt</STRONG> even if they are
described by this, the sequence can be placed in <STRONG>is2</STRONG> or
<STRONG>if</STRONG>.
- <STRONG>Delays</STRONG> <STRONG>and</STRONG> <STRONG>Padding</STRONG>
+
+</PRE><H3><a name="h3-Delays-and-Padding">Delays and Padding</a></H3><PRE>
Many older and slower terminals do not support either
XON/XOFF or DTR handshaking, including hard copy terminals
and some very archaic CRTs (including, for example, DEC
padding baud rate, then whether padding is emitted or not
is completely controlled by <STRONG>xon</STRONG>.
- If the terminal requires other than a null (zero)
- character as a pad, then this can be given as <STRONG>pad</STRONG>. Only
- the first character of the <STRONG>pad</STRONG> string is used.
+ If the terminal requires other than a null (zero) charac-
+ ter as a pad, then this can be given as <STRONG>pad</STRONG>. Only the
+ first character of the <STRONG>pad</STRONG> string is used.
- <STRONG>Status</STRONG> <STRONG>Lines</STRONG>
- Some terminals have an extra `status line' which is not
+</PRE><H3><a name="h3-Status-Lines">Status Lines</a></H3><PRE>
+ Some terminals have an extra "status line" which is not
normally used by software (and thus not counted in the
terminal's <STRONG>lines</STRONG> capability).
The boolean capability <STRONG>eslok</STRONG> specifies that escape
sequences, tabs, etc., work ordinarily in the status line.
- The <STRONG>ncurses</STRONG> implementation does not yet use any of these
- capabilities. They are documented here in case they ever
+ The <STRONG>ncurses</STRONG> implementation does not yet use any of these
+ capabilities. They are documented here in case they ever
become important.
- <STRONG>Line</STRONG> <STRONG>Graphics</STRONG>
- Many terminals have alternate character sets useful for
- forms-drawing. Terminfo and <STRONG>curses</STRONG> build in support for
- the drawing characters supported by the VT100, with some
- characters from the AT&T 4410v1 added. This alternate
+</PRE><H3><a name="h3-Line-Graphics">Line Graphics</a></H3><PRE>
+ Many terminals have alternate character sets useful for
+ forms-drawing. Terminfo and <STRONG>curses</STRONG> build in support for
+ the drawing characters supported by the VT100, with some
+ characters from the AT&T 4410v1 added. This alternate
character set may be specified by the <STRONG>acsc</STRONG> capability.
-
- <STRONG>Glyph</STRONG> <STRONG>ACS</STRONG> <STRONG>Ascii</STRONG> <STRONG>VT100</STRONG>
- <STRONG>Name</STRONG> <STRONG>Name</STRONG> <STRONG>Default</STRONG> <STRONG>Name</STRONG>
- UK pound sign ACS_STERLING f }
- arrow pointing down ACS_DARROW v .
- arrow pointing left ACS_LARROW < ,
- arrow pointing right ACS_RARROW > +
- arrow pointing up ACS_UARROW ^ -
- board of squares ACS_BOARD # h
- bullet ACS_BULLET o ~
- checker board (stipple) ACS_CKBOARD : a
- degree symbol ACS_DEGREE \ f
- diamond ACS_DIAMOND + `
- greater-than-or-equal-to ACS_GEQUAL > z
- greek pi ACS_PI * {
- horizontal line ACS_HLINE - q
- lantern symbol ACS_LANTERN # i
- large plus or crossover ACS_PLUS + n
- less-than-or-equal-to ACS_LEQUAL < y
-
- lower left corner ACS_LLCORNER + m
- lower right corner ACS_LRCORNER + j
- not-equal ACS_NEQUAL ! |
- plus/minus ACS_PLMINUS # g
- scan line 1 ACS_S1 ~ o
- scan line 3 ACS_S3 - p
- scan line 7 ACS_S7 - r
- scan line 9 ACS_S9 _ s
- solid square block ACS_BLOCK # 0
- tee pointing down ACS_TTEE + w
- tee pointing left ACS_RTEE + u
- tee pointing right ACS_LTEE + t
- tee pointing up ACS_BTEE + v
- upper left corner ACS_ULCORNER + l
- upper right corner ACS_URCORNER + k
- vertical line ACS_VLINE | x
-
- The best way to define a new device's graphics set is to
- add a column to a copy of this table for your terminal,
- giving the character which (when emitted between
- <STRONG>smacs</STRONG>/<STRONG>rmacs</STRONG> switches) will be rendered as the correspond-
- ing graphic. Then read off the VT100/your terminal char-
- acter pairs right to left in sequence; these become the
+ <STRONG>Glyph</STRONG> <STRONG>ACS</STRONG> <STRONG>Ascii</STRONG> <STRONG>VT100</STRONG>
+ <STRONG>Name</STRONG> <STRONG>Name</STRONG> <STRONG>Default</STRONG> <STRONG>Name</STRONG>
+ UK pound sign ACS_STERLING f }
+ arrow pointing down ACS_DARROW v .
+ arrow pointing left ACS_LARROW < ,
+ arrow pointing right ACS_RARROW > +
+ arrow pointing up ACS_UARROW ^ -
+ board of squares ACS_BOARD # h
+ bullet ACS_BULLET o ~
+ checker board (stipple) ACS_CKBOARD : a
+ degree symbol ACS_DEGREE \ f
+ diamond ACS_DIAMOND + `
+ greater-than-or-equal-to ACS_GEQUAL > z
+ greek pi ACS_PI * {
+ horizontal line ACS_HLINE - q
+ lantern symbol ACS_LANTERN # i
+ large plus or crossover ACS_PLUS + n
+ less-than-or-equal-to ACS_LEQUAL < y
+ lower left corner ACS_LLCORNER + m
+ lower right corner ACS_LRCORNER + j
+ not-equal ACS_NEQUAL ! |
+ plus/minus ACS_PLMINUS # g
+ scan line 1 ACS_S1 ~ o
+ scan line 3 ACS_S3 - p
+ scan line 7 ACS_S7 - r
+ scan line 9 ACS_S9 _ s
+ solid square block ACS_BLOCK # 0
+ tee pointing down ACS_TTEE + w
+ tee pointing left ACS_RTEE + u
+ tee pointing right ACS_LTEE + t
+ tee pointing up ACS_BTEE + v
+ upper left corner ACS_ULCORNER + l
+ upper right corner ACS_URCORNER + k
+ vertical line ACS_VLINE | x
+
+ The best way to define a new device's graphics set is to
+ add a column to a copy of this table for your terminal,
+ giving the character which (when emitted between
+ <STRONG>smacs</STRONG>/<STRONG>rmacs</STRONG> switches) will be rendered as the correspond-
+ ing graphic. Then read off the VT100/your terminal char-
+ acter pairs right to left in sequence; these become the
ACSC string.
- <STRONG>Color</STRONG> <STRONG>Handling</STRONG>
- Most color terminals are either `Tektronix-like' or `HP-
- like'. Tektronix-like terminals have a predefined set of
- N colors (where N usually 8), and can set character-cell
+</PRE><H3><a name="h3-Color-Handling">Color Handling</a></H3><PRE>
+ Most color terminals are either "Tektronix-like" or "HP-
+ like". Tektronix-like terminals have a predefined set of
+ N colors (where N usually 8), and can set character-cell
foreground and background characters independently, mixing
- them into N * N color-pairs. On HP-like terminals, the
+ them into N * N color-pairs. On HP-like terminals, the
use must set each color pair up separately (foreground and
- background are not independently settable). Up to M
- color-pairs may be set up from 2*M different colors.
+ background are not independently settable). Up to M
+ color-pairs may be set up from 2*M different colors.
ANSI-compatible terminals are Tektronix-like.
Some basic color capabilities are independent of the color
method. The numeric capabilities <STRONG>colors</STRONG> and <STRONG>pairs</STRONG> specify
- the maximum numbers of colors and color-pairs that can be
- displayed simultaneously. The <STRONG>op</STRONG> (original pair) string
- resets foreground and background colors to their default
- values for the terminal. The <STRONG>oc</STRONG> string resets all colors
- or color-pairs to their default values for the terminal.
- Some terminals (including many PC terminal emulators)
- erase screen areas with the current background color
- rather than the power-up default background; these should
+ the maximum numbers of colors and color-pairs that can be
+ displayed simultaneously. The <STRONG>op</STRONG> (original pair) string
+ resets foreground and background colors to their default
+ values for the terminal. The <STRONG>oc</STRONG> string resets all colors
+ or color-pairs to their default values for the terminal.
+ Some terminals (including many PC terminal emulators)
+ erase screen areas with the current background color
+ rather than the power-up default background; these should
have the boolean capability <STRONG>bce</STRONG>.
- To change the current foreground or background color on a
- Tektronix-type terminal, use <STRONG>setaf</STRONG> (set ANSI foreground)
- and <STRONG>setab</STRONG> (set ANSI background) or <STRONG>setf</STRONG> (set foreground)
- and <STRONG>setb</STRONG> (set background). These take one parameter, the
+ To change the current foreground or background color on a
+ Tektronix-type terminal, use <STRONG>setaf</STRONG> (set ANSI foreground)
+ and <STRONG>setab</STRONG> (set ANSI background) or <STRONG>setf</STRONG> (set foreground)
+ and <STRONG>setb</STRONG> (set background). These take one parameter, the
color number. The SVr4 documentation describes only
- <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft says that "If the terminal
+ <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft says that "If the terminal
supports ANSI escape sequences to set background and fore-
- ground, they should be coded as <STRONG>setaf</STRONG> and <STRONG>setab</STRONG>, respec-
- tively. If the terminal supports other escape sequences
- to set background and foreground, they should be coded as
- <STRONG>setf</STRONG> and <STRONG>setb</STRONG>, respectively. The <EM>vidputs()</EM> function and
- the refresh functions use <STRONG>setaf</STRONG> and <STRONG>setab</STRONG> if they are
+ ground, they should be coded as <STRONG>setaf</STRONG> and <STRONG>setab</STRONG>, respec-
+ tively. If the terminal supports other escape sequences
+ to set background and foreground, they should be coded as
+ <STRONG>setf</STRONG> and <STRONG>setb</STRONG>, respectively. The <EM>vidputs()</EM> function and
+ the refresh functions use <STRONG>setaf</STRONG> and <STRONG>setab</STRONG> if they are
defined."
- The <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> and <STRONG>setf</STRONG>/<STRONG>setb</STRONG> capabilities take a single
+ The <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> and <STRONG>setf</STRONG>/<STRONG>setb</STRONG> capabilities take a single
numeric argument each. Argument values 0-7 of <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>
- are portably defined as follows (the middle column is the
+ are portably defined as follows (the middle column is the
symbolic #define available in the header for the <STRONG>curses</STRONG> or
- <STRONG>ncurses</STRONG> libraries). The terminal hardware is free to map
- these as it likes, but the RGB values indicate normal
+ <STRONG>ncurses</STRONG> libraries). The terminal hardware is free to map
+ these as it likes, but the RGB values indicate normal
locations in color space.
-
<STRONG>Color</STRONG> <STRONG>#define</STRONG> <STRONG>Value</STRONG> <STRONG>RGB</STRONG>
black <STRONG>COLOR_BLACK</STRONG> 0 0, 0, 0
red <STRONG>COLOR_RED</STRONG> 1 max,0,0
cyan <STRONG>COLOR_CYAN</STRONG> 6 0,max,max
white <STRONG>COLOR_WHITE</STRONG> 7 max,max,max
- The argument values of <STRONG>setf</STRONG>/<STRONG>setb</STRONG> historically correspond
+ The argument values of <STRONG>setf</STRONG>/<STRONG>setb</STRONG> historically correspond
to a different mapping, i.e.,
<STRONG>Color</STRONG> <STRONG>#define</STRONG> <STRONG>Value</STRONG> <STRONG>RGB</STRONG>
magenta <STRONG>COLOR_MAGENTA</STRONG> 5 max,0,max
yellow <STRONG>COLOR_YELLOW</STRONG> 6 max,max,0
white <STRONG>COLOR_WHITE</STRONG> 7 max,max,max
+
It is important to not confuse the two sets of color capa-
- bilities; otherwise red/blue will be interchanged on the
+ bilities; otherwise red/blue will be interchanged on the
display.
- On an HP-like terminal, use <STRONG>scp</STRONG> with a color-pair number
+ On an HP-like terminal, use <STRONG>scp</STRONG> with a color-pair number
parameter to set which color pair is current.
- On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may be
- present to indicate that colors can be modified. If so,
+ On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may be
+ present to indicate that colors can be modified. If so,
the <STRONG>initc</STRONG> capability will take a color number (0 to <STRONG>colors</STRONG>
- - 1)and three more parameters which describe the color.
+ - 1)and three more parameters which describe the color.
These three parameters default to being interpreted as RGB
- (Red, Green, Blue) values. If the boolean capability <STRONG>hls</STRONG>
+ (Red, Green, Blue) values. If the boolean capability <STRONG>hls</STRONG>
is present, they are instead as HLS (Hue, Lightness, Satu-
ration) indices. The ranges are terminal-dependent.
- On an HP-like terminal, <STRONG>initp</STRONG> may give a capability for
- changing a color-pair value. It will take seven parame-
- ters; a color-pair number (0 to <STRONG>max_pairs</STRONG> - 1), and two
- triples describing first background and then foreground
- colors. These parameters must be (Red, Green, Blue) or
+ On an HP-like terminal, <STRONG>initp</STRONG> may give a capability for
+ changing a color-pair value. It will take seven parame-
+ ters; a color-pair number (0 to <STRONG>max_pairs</STRONG> - 1), and two
+ triples describing first background and then foreground
+ colors. These parameters must be (Red, Green, Blue) or
(Hue, Lightness, Saturation) depending on <STRONG>hls</STRONG>.
- On some color terminals, colors collide with highlights.
+ On some color terminals, colors collide with highlights.
You can register these collisions with the <STRONG>ncv</STRONG> capability.
- This is a bit-mask of attributes not to be used when col-
- ors are enabled. The correspondence with the attributes
+ This is a bit-mask of attributes not to be used when col-
+ ors are enabled. The correspondence with the attributes
understood by <STRONG>curses</STRONG> is as follows:
-
- <STRONG>Attribute</STRONG> <STRONG>Bit</STRONG> <STRONG>Decimal</STRONG>
- A_STANDOUT 0 1
- A_UNDERLINE 1 2
- A_REVERSE 2 4
- A_BLINK 3 8
- A_DIM 4 16
- A_BOLD 5 32
- A_INVIS 6 64
- A_PROTECT 7 128
-
- A_ALTCHARSET 8 256
-
- For example, on many IBM PC consoles, the underline
- attribute collides with the foreground color blue and is
- not available in color mode. These should have an <STRONG>ncv</STRONG>
+ <STRONG>Attribute</STRONG> <STRONG>Bit</STRONG> <STRONG>Decimal</STRONG> <STRONG>Set</STRONG> <STRONG>by</STRONG>
+ A_STANDOUT 0 1 sgr
+ A_UNDERLINE 1 2 sgr
+ A_REVERSE 2 4 sgr
+ A_BLINK 3 8 sgr
+ A_DIM 4 16 sgr
+ A_BOLD 5 32 sgr
+ A_INVIS 6 64 sgr
+ A_PROTECT 7 128 sgr
+ A_ALTCHARSET 8 256 sgr
+ A_HORIZONTAL 9 512 sgr1
+ A_LEFT 10 1024 sgr1
+ A_LOW 11 2048 sgr1
+ A_RIGHT 12 4096 sgr1
+ A_TOP 13 8192 sgr1
+ A_VERTICAL 14 16384 sgr1
+ A_ITALIC 15 32768 sitm
+
+ For example, on many IBM PC consoles, the underline
+ attribute collides with the foreground color blue and is
+ not available in color mode. These should have an <STRONG>ncv</STRONG>
capability of 2.
- SVr4 curses does nothing with <STRONG>ncv</STRONG>, ncurses recognizes it
+ SVr4 curses does nothing with <STRONG>ncv</STRONG>, ncurses recognizes it
and optimizes the output in favor of colors.
- <STRONG>Miscellaneous</STRONG>
- If the terminal requires other than a null (zero) charac-
- ter as a pad, then this can be given as pad. Only the
- first character of the pad string is used. If the termi-
+</PRE><H3><a name="h3-Miscellaneous">Miscellaneous</a></H3><PRE>
+ If the terminal requires other than a null (zero) charac-
+ ter as a pad, then this can be given as pad. Only the
+ first character of the pad string is used. If the termi-
nal does not have a pad character, specify npc. Note that
- ncurses implements the termcap-compatible <STRONG>PC</STRONG> variable;
- though the application may set this value to something
- other than a null, ncurses will test <STRONG>npc</STRONG> first and use
+ ncurses implements the termcap-compatible <STRONG>PC</STRONG> variable;
+ though the application may set this value to something
+ other than a null, ncurses will test <STRONG>npc</STRONG> first and use
napms if the terminal has no pad character.
- If the terminal can move up or down half a line, this can
- be indicated with <STRONG>hu</STRONG> (half-line up) and <STRONG>hd</STRONG> (half-line
+ If the terminal can move up or down half a line, this can
+ be indicated with <STRONG>hu</STRONG> (half-line up) and <STRONG>hd</STRONG> (half-line
down). This is primarily useful for superscripts and sub-
- scripts on hard-copy terminals. If a hard-copy terminal
- can eject to the next page (form feed), give this as <STRONG>ff</STRONG>
+ scripts on hard-copy terminals. If a hard-copy terminal
+ can eject to the next page (form feed), give this as <STRONG>ff</STRONG>
(usually control L).
- If there is a command to repeat a given character a given
- number of times (to save time transmitting a large number
- of identical characters) this can be indicated with the
- parameterized string <STRONG>rep</STRONG>. The first parameter is the
- character to be repeated and the second is the number of
- times to repeat it. Thus, tparm(repeat_char, 'x', 10) is
- the same as `xxxxxxxxxx'.
+ If there is a command to repeat a given character a given
+ number of times (to save time transmitting a large number
+ of identical characters) this can be indicated with the
+ parameterized string <STRONG>rep</STRONG>. The first parameter is the
+ character to be repeated and the second is the number of
+ times to repeat it. Thus, tparm(repeat_char, 'x', 10) is
+ the same as "xxxxxxxxxx".
- If the terminal has a settable command character, such as
- the TEKTRONIX 4025, this can be indicated with <STRONG>cmdch</STRONG>. A
+ If the terminal has a settable command character, such as
+ the TEKTRONIX 4025, this can be indicated with <STRONG>cmdch</STRONG>. A
prototype command character is chosen which is used in all
- capabilities. This character is given in the <STRONG>cmdch</STRONG> capa-
- bility to identify it. The following convention is sup-
- ported on some UNIX systems: The environment is to be
- searched for a <STRONG>CC</STRONG> variable, and if found, all occurrences
+ capabilities. This character is given in the <STRONG>cmdch</STRONG> capa-
+ bility to identify it. The following convention is sup-
+ ported on some UNIX systems: The environment is to be
+ searched for a <STRONG>CC</STRONG> variable, and if found, all occurrences
of the prototype character are replaced with the character
in the environment variable.
- Terminal descriptions that do not represent a specific
+ Terminal descriptions that do not represent a specific
kind of known terminal, such as <EM>switch</EM>, <EM>dialup</EM>, <EM>patch</EM>, and
- <EM>network</EM>, should include the <STRONG>gn</STRONG> (generic) capability so
- that programs can complain that they do not know how to
- talk to the terminal. (This capability does not apply to
- <EM>virtual</EM> terminal descriptions for which the escape
+ <EM>network</EM>, should include the <STRONG>gn</STRONG> (generic) capability so
+ that programs can complain that they do not know how to
+ talk to the terminal. (This capability does not apply to
+ <EM>virtual</EM> terminal descriptions for which the escape
sequences are known.)
- If the terminal has a ``meta key'' which acts as a shift
- key, setting the 8th bit of any character transmitted,
- this fact can be indicated with <STRONG>km</STRONG>. Otherwise, software
+ If the terminal has a "meta key" which acts as a shift
+ key, setting the 8th bit of any character transmitted,
+ this fact can be indicated with <STRONG>km</STRONG>. Otherwise, software
will assume that the 8th bit is parity and it will usually
- be cleared. If strings exist to turn this ``meta mode''
- on and off, they can be given as <STRONG>smm</STRONG> and <STRONG>rmm</STRONG>.
+ be cleared. If strings exist to turn this "meta mode" on
+ and off, they can be given as <STRONG>smm</STRONG> and <STRONG>rmm</STRONG>.
- If the terminal has more lines of memory than will fit on
- the screen at once, the number of lines of memory can be
- indicated with <STRONG>lm</STRONG>. A value of <STRONG>lm</STRONG>#0 indicates that the
+ If the terminal has more lines of memory than will fit on
+ the screen at once, the number of lines of memory can be
+ indicated with <STRONG>lm</STRONG>. A value of <STRONG>lm</STRONG>#0 indicates that the
number of lines is not fixed, but that there is still more
memory than fits on the screen.
If the terminal is one of those supported by the UNIX vir-
- tual terminal protocol, the terminal number can be given
+ tual terminal protocol, the terminal number can be given
as <STRONG>vt</STRONG>.
Media copy strings which control an auxiliary printer con-
nected to the terminal can be given as <STRONG>mc0</STRONG>: print the con-
- tents of the screen, <STRONG>mc4</STRONG>: turn off the printer, and <STRONG>mc5</STRONG>:
- turn on the printer. When the printer is on, all text
- sent to the terminal will be sent to the printer. It is
+ tents of the screen, <STRONG>mc4</STRONG>: turn off the printer, and <STRONG>mc5</STRONG>:
+ turn on the printer. When the printer is on, all text
+ sent to the terminal will be sent to the printer. It is
undefined whether the text is also displayed on the termi-
nal screen when the printer is on. A variation <STRONG>mc5p</STRONG> takes
one parameter, and leaves the printer on for as many char-
- acters as the value of the parameter, then turns the
- printer off. The parameter should not exceed 255. All
+ acters as the value of the parameter, then turns the
+ printer off. The parameter should not exceed 255. All
text, including <STRONG>mc4</STRONG>, is transparently passed to the
printer while an <STRONG>mc5p</STRONG> is in effect.
- <STRONG>Glitches</STRONG> <STRONG>and</STRONG> <STRONG>Braindamage</STRONG>
- Hazeltine terminals, which do not allow `~' characters to
+</PRE><H3><a name="h3-Glitches-and-Braindamage">Glitches and Braindamage</a></H3><PRE>
+ Hazeltine terminals, which do not allow "~" characters to
be displayed should indicate <STRONG>hz</STRONG>.
Terminals which ignore a line-feed immediately after an <STRONG>am</STRONG>
Teleray terminals, where tabs turn all characters moved
over to blanks, should indicate <STRONG>xt</STRONG> (destructive tabs).
Note: the variable indicating this is now
- `dest_tabs_magic_smso'; in older versions, it was tel-
+ "dest_tabs_magic_smso"; in older versions, it was tel-
eray_glitch. This glitch is also taken to mean that it is
- not possible to position the cursor on top of a ``magic
- cookie'', that to erase standout mode it is instead neces-
+ not possible to position the cursor on top of a "magic
+ cookie", that to erase standout mode it is instead neces-
sary to use delete and insert line. The ncurses implemen-
tation ignores this glitch.
ing that the f1 key is used for escape and f2 for control
C. (Only certain Superbees have this problem, depending
on the ROM.) Note that in older terminfo versions, this
- capability was called `beehive_glitch'; it is now
- `no_esc_ctl_c'.
+ capability was called "beehive_glitch"; it is now
+ "no_esc_ctl_c".
Other specific terminal problems may be corrected by
adding more capabilities of the form <STRONG>x</STRONG><EM>x</EM>.
- <STRONG>Similar</STRONG> <STRONG>Terminals</STRONG>
+</PRE><H3><a name="h3-Similar-Terminals">Similar Terminals</a></H3><PRE>
If there are two very similar terminals, one (the variant)
can be defined as being just like the other (the base)
with certain exceptions. In the definition of the vari-
the use reference that imports it, where <EM>xx</EM> is the capa-
bility. For example, the entry
- 2621-nl, smkx@, rmkx@, use=2621,
+ 2621-nl, smkx@, rmkx@, use=2621,
defines a 2621-nl that does not have the <STRONG>smkx</STRONG> or <STRONG>rmkx</STRONG>
capabilities, and hence does not turn on the function key
modes for a terminal, or for different user preferences.
- <STRONG>Pitfalls</STRONG> <STRONG>of</STRONG> <STRONG>Long</STRONG> <STRONG>Entries</STRONG>
+</PRE><H3><a name="h3-Pitfalls-of-Long-Entries">Pitfalls of Long Entries</a></H3><PRE>
Long terminfo entries are unlikely to be a problem; to
date, no entry has even approached terminfo's 4096-byte
string-table maximum. Unfortunately, the termcap transla-
libraries strip off the final newline, too (GNU termcap
does not). Now suppose:
- * a termcap entry before expansion is more than 1023
- bytes long,
+ <STRONG>o</STRONG> a termcap entry before expansion is more than 1023
+ bytes long,
- * and the application has only allocated a 1k buffer,
+ <STRONG>o</STRONG> and the application has only allocated a 1k buffer,
- * and the termcap library (like the one in BSD/OS 1.1
- and GNU) reads the whole entry into the buffer, no
- matter what its length, to see if it's the entry it
- wants,
+ <STRONG>o</STRONG> and the termcap library (like the one in BSD/OS 1.1
+ and GNU) reads the whole entry into the buffer, no
+ matter what its length, to see if it is the entry it
+ wants,
- * and <STRONG>tgetent()</STRONG> is searching for a terminal type that
- either is the long entry, appears in the termcap file
- after the long entry, or does not appear in the file
- at all (so that <STRONG>tgetent()</STRONG> has to search the whole
- termcap file).
+ <STRONG>o</STRONG> and <STRONG>tgetent()</STRONG> is searching for a terminal type that
+ either is the long entry, appears in the termcap file
+ after the long entry, or does not appear in the file
+ at all (so that <STRONG>tgetent()</STRONG> has to search the whole
+ termcap file).
Then <STRONG>tgetent()</STRONG> will overwrite memory, perhaps its stack,
and probably core dump the program. Programs like telnet
The "after tc expansion" length will have a similar effect
to the above, but only for people who actually set TERM to
that terminal type, since <STRONG>tgetent()</STRONG> only does "tc" expan-
- sion once it's found the terminal type it was looking for,
- not while searching.
+ sion once it is found the terminal type it was looking
+ for, not while searching.
In summary, a termcap entry that is longer than 1023 bytes
can cause, on various combinations of termcap libraries
and applications, a core dump, warnings, or incorrect
- operation. If it's too long even before "tc" expansion,
+ operation. If it is too long even before "tc" expansion,
it will have this effect even for users of some other ter-
minal types and users whose TERM variable does not have a
termcap entry.
When in -C (translate to termcap) mode, the <STRONG>ncurses</STRONG> imple-
- mentation of <STRONG><A HREF="tic.1.html">tic(1)</A></STRONG> issues warning messages when the pre-
+ mentation of <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG> issues warning messages when the pre-
tc length of a termcap translation is too long. The -c
(check) option also checks resolved (after tc expansion)
lengths.
- <STRONG>Binary</STRONG> <STRONG>Compatibility</STRONG>
+
+</PRE><H3><a name="h3-Binary-Compatibility">Binary Compatibility</a></H3><PRE>
It is not wise to count on portability of binary terminfo
entries between commercial UNIX versions. The problem is
that there are at least two versions of terminfo (under
and XSI Curses extensions.
-</PRE>
-<H2>EXTENSIONS</H2><PRE>
- Some SVr4 <STRONG>curses</STRONG> implementations, and all previous to
- SVr4, do not interpret the %A and %O operators in parame-
+</PRE><H2><a name="h2-EXTENSIONS">EXTENSIONS</a></H2><PRE>
+ Searching for terminal descriptions in <STRONG>$HOME/.terminfo</STRONG> and
+ TERMINFO_DIRS is not supported by older implementations.
+
+ Some SVr4 <STRONG>curses</STRONG> implementations, and all previous to
+ SVr4, do not interpret the %A and %O operators in parame-
ter strings.
- SVr4/XPG4 do not specify whether <STRONG>msgr</STRONG> licenses movement
- while in an alternate-character-set mode (such modes may,
- among other things, map CR and NL to characters that do
- not trigger local motions). The <STRONG>ncurses</STRONG> implementation
- ignores <STRONG>msgr</STRONG> in <STRONG>ALTCHARSET</STRONG> mode. This raises the possi-
- bility that an XPG4 implementation making the opposite
- interpretation may need terminfo entries made for <STRONG>ncurses</STRONG>
+ SVr4/XPG4 do not specify whether <STRONG>msgr</STRONG> licenses movement
+ while in an alternate-character-set mode (such modes may,
+ among other things, map CR and NL to characters that do
+ not trigger local motions). The <STRONG>ncurses</STRONG> implementation
+ ignores <STRONG>msgr</STRONG> in <STRONG>ALTCHARSET</STRONG> mode. This raises the possi-
+ bility that an XPG4 implementation making the opposite
+ interpretation may need terminfo entries made for <STRONG>ncurses</STRONG>
to have <STRONG>msgr</STRONG> turned off.
- The <STRONG>ncurses</STRONG> library handles insert-character and insert-
+ The <STRONG>ncurses</STRONG> library handles insert-character and insert-
character modes in a slightly non-standard way to get bet-
- ter update efficiency. See the <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
+ ter update efficiency. See the <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
subsection above.
- The parameter substitutions for <STRONG>set_clock</STRONG> and <STRONG>dis-</STRONG>
- <STRONG>play_clock</STRONG> are not documented in SVr4 or the XSI Curses
+ The parameter substitutions for <STRONG>set_clock</STRONG> and <STRONG>dis-</STRONG>
+ <STRONG>play_clock</STRONG> are not documented in SVr4 or the XSI Curses
standard. They are deduced from the documentation for the
AT&T 505 terminal.
- Be careful assigning the <STRONG>kmous</STRONG> capability. The <STRONG>ncurses</STRONG>
- wants to interpret it as <STRONG>KEY_MOUSE</STRONG>, for use by terminals
- and emulators like xterm that can return mouse-tracking
+ Be careful assigning the <STRONG>kmous</STRONG> capability. The <STRONG>ncurses</STRONG>
+ wants to interpret it as <STRONG>KEY_MOUSE</STRONG>, for use by terminals
+ and emulators like xterm that can return mouse-tracking
information in the keyboard-input stream.
- Different commercial ports of terminfo and curses support
- different subsets of the XSI Curses standard and (in some
+ X/Open Curses does not mention italics. Portable applica-
+ tions must assume that numeric capabilities are signed
+ 16-bit values. This includes the <EM>no</EM><STRONG>_</STRONG><EM>color</EM><STRONG>_</STRONG><EM>video</EM> (ncv)
+ capability. The 32768 mask value used for italics with
+ ncv can be confused with an absent or cancelled ncv. If
+ italics should work with colors, then the ncv value must
+ be specified, even if it is zero.
+
+ Different commercial ports of terminfo and curses support
+ different subsets of the XSI Curses standard and (in some
cases) different extension sets. Here is a summary, accu-
rate as of October 1995:
<STRONG>SVR4,</STRONG> <STRONG>Solaris,</STRONG> <STRONG>ncurses</STRONG> -- These support all SVr4 capabili-
ties.
- <STRONG>SGI</STRONG> -- Supports the SVr4 set, adds one undocumented
+ <STRONG>SGI</STRONG> -- Supports the SVr4 set, adds one undocumented
extended string capability (<STRONG>set_pglen</STRONG>).
- <STRONG>SVr1,</STRONG> <STRONG>Ultrix</STRONG> -- These support a restricted subset of ter-
- minfo capabilities. The booleans end with <STRONG>xon_xoff</STRONG>; the
- numerics with <STRONG>width_status_line</STRONG>; and the strings with
+ <STRONG>SVr1,</STRONG> <STRONG>Ultrix</STRONG> -- These support a restricted subset of ter-
+ minfo capabilities. The booleans end with <STRONG>xon_xoff</STRONG>; the
+ numerics with <STRONG>width_status_line</STRONG>; and the strings with
<STRONG>prtr_non</STRONG>.
- <STRONG>HP/UX</STRONG> -- Supports the SVr1 subset, plus the SVr[234]
+ <STRONG>HP/UX</STRONG> -- Supports the SVr1 subset, plus the SVr[234]
numerics <STRONG>num_labels</STRONG>, <STRONG>label_height</STRONG>, <STRONG>label_width</STRONG>, plus func-
- tion keys 11 through 63, plus <STRONG>plab_norm</STRONG>, <STRONG>label_on</STRONG>, and
+ tion keys 11 through 63, plus <STRONG>plab_norm</STRONG>, <STRONG>label_on</STRONG>, and
<STRONG>label_off</STRONG>, plus some incompatible extensions in the string
table.
- <STRONG>AIX</STRONG> -- Supports the SVr1 subset, plus function keys 11
- through 63, plus a number of incompatible string table
+ <STRONG>AIX</STRONG> -- Supports the SVr1 subset, plus function keys 11
+ through 63, plus a number of incompatible string table
extensions.
- <STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
+ <STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
-</PRE>
-<H2>FILES</H2><PRE>
+</PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
/usr/share/terminfo/?/* files containing terminal
descriptions
-</PRE>
-<H2>SEE ALSO</H2><PRE>
- <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="printf.3S.html">printf(3S)</A></STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
+</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
+ <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG>printf(3)</STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
+ <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>.
-</PRE>
-<H2>AUTHORS</H2><PRE>
- Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey.
+</PRE><H2><a name="h2-AUTHORS">AUTHORS</a></H2><PRE>
+ Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey.
Based on pcurses by Pavel Curtis.
- <STRONG><A HREF="TERMINFO.5.html">TERMINFO(5)</A></STRONG>
+ <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
</PRE>
-<HR>
-<ADDRESS>
-Man(1) output converted with
-<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>
-</ADDRESS>
+<div class="nav">
+<ul>
+<li><a href="#h2-NAME">NAME</a></li>
+<li><a href="#h2-SYNOPSIS">SYNOPSIS</a></li>
+<li><a href="#h2-DESCRIPTION">DESCRIPTION</a>
+<ul>
+<li><a href="#h3-Predefined-Capabilities">Predefined Capabilities</a></li>
+<li><a href="#h3-User-Defined-Capabilities">User-Defined Capabilities</a></li>
+<li><a href="#h3-A-Sample-Entry">A Sample Entry</a></li>
+<li><a href="#h3-Types-of-Capabilities">Types of Capabilities</a></li>
+<li><a href="#h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></li>
+<li><a href="#h3-Preparing-Descriptions">Preparing Descriptions</a></li>
+<li><a href="#h3-Basic-Capabilities">Basic Capabilities</a></li>
+<li><a href="#h3-Parameterized-Strings">Parameterized Strings</a></li>
+<li><a href="#h3-Cursor-Motions">Cursor Motions</a></li>
+<li><a href="#h3-Area-Clears">Area Clears</a></li>
+<li><a href="#h3-Insert_delete-line-and-vertical-motions">Insert/delete line and vertical motions</a></li>
+<li><a href="#h3-Insert_Delete-Character">Insert/Delete Character</a></li>
+<li><a href="#h3-Highlighting_-Underlining_-and-Visible-Bells">Highlighting, Underlining, and Visible Bells</a></li>
+<li><a href="#h3-Keypad-and-Function-Keys">Keypad and Function Keys</a></li>
+<li><a href="#h3-Tabs-and-Initialization">Tabs and Initialization</a></li>
+<li><a href="#h3-Delays-and-Padding">Delays and Padding</a></li>
+<li><a href="#h3-Status-Lines">Status Lines</a></li>
+<li><a href="#h3-Line-Graphics">Line Graphics</a></li>
+<li><a href="#h3-Color-Handling">Color Handling</a></li>
+<li><a href="#h3-Miscellaneous">Miscellaneous</a></li>
+<li><a href="#h3-Glitches-and-Braindamage">Glitches and Braindamage</a></li>
+<li><a href="#h3-Similar-Terminals">Similar Terminals</a></li>
+<li><a href="#h3-Pitfalls-of-Long-Entries">Pitfalls of Long Entries</a></li>
+<li><a href="#h3-Binary-Compatibility">Binary Compatibility</a></li>
+</ul>
+</li>
+<li><a href="#h2-EXTENSIONS">EXTENSIONS</a></li>
+<li><a href="#h2-FILES">FILES</a></li>
+<li><a href="#h2-SEE-ALSO">SEE ALSO</a></li>
+<li><a href="#h2-AUTHORS">AUTHORS</a></li>
+</ul>
+</div>
</BODY>
</HTML>