]> ncurses.scripts.mit.edu Git - ncurses.git/blobdiff - doc/html/man/terminfo.5.html
ncurses 6.0 - patch 20160326
[ncurses.git] / doc / html / man / terminfo.5.html
index 51a41ace5eb574208e4cb82356f05ac146d99dd6..a769f917fd13beeccd3a0aeae6ce30136763679f 100644 (file)
@@ -1,4 +1,3 @@
-<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
 <!-- 
   * t
   * DO NOT EDIT THIS FILE BY HAND!
 <!-- 
   * t
   * DO NOT EDIT THIS FILE BY HAND!
@@ -6,7 +5,7 @@
   * Note: this must be run through tbl before nroff.
   * The magic cookie on the first line triggers this under some man programs.
   ****************************************************************************
   * Note: this must be run through tbl before nroff.
   * The magic cookie on the first line triggers this under some man programs.
   ****************************************************************************
-  * Copyright (c) 1998-2004,2006 Free Software Foundation, Inc.              *
+  * Copyright (c) 1998-2012,2013 Free Software Foundation, Inc.              *
   *                                                                          *
   * Permission is hereby granted, free of charge, to any person obtaining a  *
   * copy of this software and associated documentation files (the            *
   *                                                                          *
   * Permission is hereby granted, free of charge, to any person obtaining a  *
   * copy of this software and associated documentation files (the            *
@@ -32,9 +31,9 @@
   * sale, use or other dealings in this Software without prior written       *
   * authorization.                                                           *
   ****************************************************************************
   * sale, use or other dealings in this Software without prior written       *
   * authorization.                                                           *
   ****************************************************************************
-  * @Id: terminfo.head,v 1.16 2007/03/04 00:09:46 tom Exp @
+  * @Id: terminfo.head,v 1.21 2013/03/09 22:11:36 tom Exp @
   * Head of terminfo man page ends here
   * Head of terminfo man page ends here
-  * @Id: terminfo.tail,v 1.49 2008/02/16 20:57:43 tom Exp @
+  * @Id: terminfo.tail,v 1.69 2015/04/26 14:47:23 tom Exp @
   * Beginning of terminfo.tail file
   * This file is part of ncurses.
   * See "terminfo.head" for copyright.
   * Beginning of terminfo.tail file
   * This file is part of ncurses.
   * See "terminfo.head" for copyright.
   *.in +2
   *.TH
 -->
   *.in +2
   *.TH
 -->
+<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
 <HTML>
 <HEAD>
 <HTML>
 <HEAD>
+<meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
+<meta name="generator" content="Manpage converted by man2html - see http://invisible-island.net/scripts/readme.html#others_scripts">
 <TITLE>terminfo 5   File Formats</TITLE>
 <link rev=made href="mailto:bug-ncurses@gnu.org">
 <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
 </HEAD>
 <BODY>
 <TITLE>terminfo 5   File Formats</TITLE>
 <link rev=made href="mailto:bug-ncurses@gnu.org">
 <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
 </HEAD>
 <BODY>
-<H1>terminfo 5   File Formats</H1>
-<HR>
+<H1 class="no-header">terminfo 5   File Formats</H1>
 <PRE>
 <PRE>
-<!-- Manpage converted by man2html 3.0.1 -->
 <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>                   File Formats                  <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
 
 
 
 
 <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>                   File Formats                  <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
 
 
 
 
-</PRE>
-<H2>NAME</H2><PRE>
+</PRE><H2><a name="h2-NAME">NAME</a></H2><PRE>
        terminfo - terminal capability data base
 
 
        terminfo - terminal capability data base
 
 
-</PRE>
-<H2>SYNOPSIS</H2><PRE>
+</PRE><H2><a name="h2-SYNOPSIS">SYNOPSIS</a></H2><PRE>
        /usr/share/terminfo/*/*
 
 
        /usr/share/terminfo/*/*
 
 
-</PRE>
-<H2>DESCRIPTION</H2><PRE>
+</PRE><H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
        <EM>Terminfo</EM>  is  a  data  base  describing terminals, used by
        <EM>Terminfo</EM>  is  a  data  base  describing terminals, used by
-       screen-oriented programs  such  as  <STRONG><A HREF="nvi.1.html">nvi(1)</A></STRONG>,  <STRONG><A HREF="rogue.1.html">rogue(1)</A></STRONG>  and
+       screen-oriented programs  such  as  <STRONG>nvi(1)</STRONG>,  <STRONG>rogue(1)</STRONG>  and
        libraries  such  as <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>.  <EM>Terminfo</EM> describes termi-
        nals by giving a set of capabilities which they  have,  by
        specifying how to perform screen operations, and by speci-
        fying padding requirements and  initialization  sequences.
        libraries  such  as <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>.  <EM>Terminfo</EM> describes termi-
        nals by giving a set of capabilities which they  have,  by
        specifying how to perform screen operations, and by speci-
        fying padding requirements and  initialization  sequences.
-       This describes <STRONG>ncurses</STRONG> version 5.6 (patch 20080621).
+       This describes <STRONG>ncurses</STRONG> version 6.0 (patch 20160326).
 
        Entries in <EM>terminfo</EM> consist of a sequence of `,' separated
        fields (embedded commas may be escaped with a backslash or
 
        Entries in <EM>terminfo</EM> consist of a sequence of `,' separated
        fields (embedded commas may be escaped with a backslash or
        Terminal names (except for the last, verbose entry) should
        be chosen using the following conventions.  The particular
        piece of hardware making up the  terminal  should  have  a
        Terminal names (except for the last, verbose entry) should
        be chosen using the following conventions.  The particular
        piece of hardware making up the  terminal  should  have  a
-       root  name, thus ``hp2621''.  This name should not contain
+       root  name,  thus  "hp2621".  This name should not contain
        hyphens.  Modes that the hardware can be in, or user pref-
        erences,  should  be indicated by appending a hyphen and a
        mode suffix.  Thus, a vt100 in 132 column  mode  would  be
        vt100-w.  The following suffixes should be used where pos-
        sible:
 
        hyphens.  Modes that the hardware can be in, or user pref-
        erences,  should  be indicated by appending a hyphen and a
        mode suffix.  Thus, a vt100 in 132 column  mode  would  be
        vt100-w.  The following suffixes should be used where pos-
        sible:
 
-
       <STRONG>Suffix</STRONG>                  <STRONG>Meaning</STRONG>                   <STRONG>Example</STRONG>
       -<EM>nn</EM>      Number of lines on the screen            aaa-60
       -<EM>n</EM>p      Number of pages of memory                c100-4p
       <STRONG>Suffix</STRONG>                  <STRONG>Meaning</STRONG>                   <STRONG>Example</STRONG>
       -<EM>nn</EM>      Number of lines on the screen            aaa-60
       -<EM>n</EM>p      Number of pages of memory                c100-4p
       -ns      No status line                           hp2626-ns
       -rv      Reverse video                            c100-rv
       -s       Enable status line                       vt100-s
       -ns      No status line                           hp2626-ns
       -rv      Reverse video                            c100-rv
       -s       Enable status line                       vt100-s
-
       -vb      Use visible bell instead of beep         wy370-vb
       -vb      Use visible bell instead of beep         wy370-vb
+
       -w       Wide mode (&gt; 80 columns, usually 132)    vt100-w
 
        For more on terminal naming conventions, see  the  <STRONG>term(7)</STRONG>
        manual page.
 
       -w       Wide mode (&gt; 80 columns, usually 132)    vt100-w
 
        For more on terminal naming conventions, see  the  <STRONG>term(7)</STRONG>
        manual page.
 
-   <STRONG>Capabilities</STRONG>
+
+</PRE><H3><a name="h3-Predefined-Capabilities">Predefined Capabilities</a></H3><PRE>
        The  following  is  a  complete  table of the capabilities
        included in a terminfo description block and available  to
        terminfo-using code.  In each line of the table,
        The  following  is  a  complete  table of the capabilities
        included in a terminfo description block and available  to
        terminfo-using code.  In each line of the table,
        These are the boolean capabilities:
 
 
        These are the boolean capabilities:
 
 
-               <STRONG>Variable</STRONG>          <STRONG>Cap-</STRONG>  <STRONG>TCap</STRONG>      <STRONG>Description</STRONG>
-               <STRONG>Booleans</STRONG>          <STRONG>name</STRONG>  <STRONG>Code</STRONG>
-       auto_left_margin          bw    bw    cub1 wraps from col-
+               <STRONG>Variable</STRONG>          <STRONG>Cap-</STRONG>   <STRONG>TCap</STRONG>     <STRONG>Description</STRONG>
+               <STRONG>Booleans</STRONG>          <STRONG>name</STRONG>   <STRONG>Code</STRONG>
+       auto_left_margin          bw     bw   cub1 wraps from col-
                                              umn 0 to last column
                                              umn 0 to last column
-       auto_right_margin         am    am    terminal has auto-
+       auto_right_margin         am     am   terminal has auto-
                                              matic margins
                                              matic margins
-       back_color_erase          bce   ut    screen erased with
+       back_color_erase          bce    ut   screen erased with
                                              background color
                                              background color
-       can_change                ccc   cc    terminal can re-
+       can_change                ccc    cc   terminal can re-
                                              define existing col-
                                              ors
                                              define existing col-
                                              ors
-       ceol_standout_glitch      xhp   xs    standout not erased
+       ceol_standout_glitch      xhp    xs   standout not erased
                                              by overwriting (hp)
                                              by overwriting (hp)
-       col_addr_glitch           xhpa  YA    only positive motion
+       col_addr_glitch           xhpa   YA   only positive motion
                                              for hpa/mhpa caps
 
 
                                              for hpa/mhpa caps
 
 
-       cpi_changes_res           cpix  YF    changing character
+
+       cpi_changes_res           cpix   YF   changing character
                                              pitch changes reso-
                                              lution
                                              pitch changes reso-
                                              lution
-       cr_cancels_micro_mode     crxm  YB    using cr turns off
+       cr_cancels_micro_mode     crxm   YB   using cr turns off
                                              micro mode
                                              micro mode
-       dest_tabs_magic_smso      xt    xt    tabs destructive,
+       dest_tabs_magic_smso      xt     xt   tabs destructive,
                                              magic so char
                                              (t1061)
                                              magic so char
                                              (t1061)
-       eat_newline_glitch        xenl  xn    newline ignored
+       eat_newline_glitch        xenl   xn   newline ignored
                                              after 80 cols (con-
                                              cept)
                                              after 80 cols (con-
                                              cept)
-       erase_overstrike          eo    eo    can erase over-
+       erase_overstrike          eo     eo   can erase over-
                                              strikes with a blank
                                              strikes with a blank
-       generic_type              gn    gn    generic line type
-       hard_copy                 hc    hc    hardcopy terminal
-       hard_cursor               chts  HC    cursor is hard to
+       generic_type              gn     gn   generic line type
+       hard_copy                 hc     hc   hardcopy terminal
+       hard_cursor               chts   HC   cursor is hard to
                                              see
                                              see
-       has_meta_key              km    km    Has a meta key
+       has_meta_key              km     km   Has a meta key
                                              (i.e., sets 8th-bit)
                                              (i.e., sets 8th-bit)
-       has_print_wheel           daisy YC    printer needs opera-
+       has_print_wheel           daisy  YC   printer needs opera-
                                              tor to change char-
                                              acter set
                                              tor to change char-
                                              acter set
-       has_status_line           hs    hs    has extra status
+       has_status_line           hs     hs   has extra status
                                              line
                                              line
-       hue_lightness_saturation  hls   hl    terminal uses only
+       hue_lightness_saturation  hls    hl   terminal uses only
                                              HLS color notation
                                              (Tektronix)
                                              HLS color notation
                                              (Tektronix)
-       insert_null_glitch        in    in    insert mode distin-
+       insert_null_glitch        in     in   insert mode distin-
                                              guishes nulls
                                              guishes nulls
-       lpi_changes_res           lpix  YG    changing line pitch
+       lpi_changes_res           lpix   YG   changing line pitch
                                              changes resolution
                                              changes resolution
-       memory_above              da    da    display may be
+       memory_above              da     da   display may be
                                              retained above the
                                              screen
                                              retained above the
                                              screen
-       memory_below              db    db    display may be
+       memory_below              db     db   display may be
                                              retained below the
                                              screen
                                              retained below the
                                              screen
-       move_insert_mode          mir   mi    safe to move while
+       move_insert_mode          mir    mi   safe to move while
                                              in insert mode
                                              in insert mode
-       move_standout_mode        msgr  ms    safe to move while
+       move_standout_mode        msgr   ms   safe to move while
                                              in standout mode
                                              in standout mode
-       needs_xon_xoff            nxon  nx    padding will not
+       needs_xon_xoff            nxon   nx   padding will not
                                              work, xon/xoff
                                              required
                                              work, xon/xoff
                                              required
-       no_esc_ctlc               xsb   xb    beehive (f1=escape,
+       no_esc_ctlc               xsb    xb   beehive (f1=escape,
                                              f2=ctrl C)
                                              f2=ctrl C)
-       no_pad_char               npc   NP    pad character does
+       no_pad_char               npc    NP   pad character does
                                              not exist
                                              not exist
-       non_dest_scroll_region    ndscr ND    scrolling region is
+       non_dest_scroll_region    ndscr  ND   scrolling region is
                                              non-destructive
                                              non-destructive
-       non_rev_rmcup             nrrmc NR    smcup does not
+       non_rev_rmcup             nrrmc  NR   smcup does not
                                              reverse rmcup
                                              reverse rmcup
-       over_strike               os    os    terminal can over-
+       over_strike               os     os   terminal can over-
                                              strike
                                              strike
-       prtr_silent               mc5i  5i    printer will not
+       prtr_silent               mc5i   5i   printer will not
                                              echo on screen
                                              echo on screen
-       row_addr_glitch           xvpa  YD    only positive motion
+       row_addr_glitch           xvpa   YD   only positive motion
                                              for vpa/mvpa caps
                                              for vpa/mvpa caps
-       semi_auto_right_margin    sam   YE    printing in last
+       semi_auto_right_margin    sam    YE   printing in last
                                              column causes cr
                                              column causes cr
-       status_line_esc_ok        eslok es    escape can be used
+       status_line_esc_ok        eslok  es   escape can be used
                                              on the status line
                                              on the status line
-       tilde_glitch              hz    hz    cannot print ~'s
-                                             (hazeltine)
+       tilde_glitch              hz     hz   cannot print ~'s
+                                             (Hazeltine)
 
 
 
 
-       transparent_underline     ul    ul    underline character
+       transparent_underline     ul     ul   underline character
                                              overstrikes
                                              overstrikes
-       xon_xoff                  xon   xo    terminal uses
+       xon_xoff                  xon    xo   terminal uses
                                              xon/xoff handshaking
 
        These are the numeric capabilities:
 
 
                                              xon/xoff handshaking
 
        These are the numeric capabilities:
 
 
-            <STRONG>Variable</STRONG>         <STRONG>Cap-</STRONG>     <STRONG>TCap</STRONG>       <STRONG>Description</STRONG>
-             <STRONG>Numeric</STRONG>         <STRONG>name</STRONG>     <STRONG>Code</STRONG>
-       columns               cols     co     number of columns in
+               <STRONG>Variable</STRONG>          <STRONG>Cap-</STRONG>   <STRONG>TCap</STRONG>     <STRONG>Description</STRONG>
+                <STRONG>Numeric</STRONG>          <STRONG>name</STRONG>   <STRONG>Code</STRONG>
+       columns                   cols   co   number of columns in
                                              a line
                                              a line
-       init_tabs             it       it     tabs initially every
+       init_tabs                 it     it   tabs initially every
                                              # spaces
                                              # spaces
-       label_height          lh       lh     rows in each label
-       label_width           lw       lw     columns in each
+       label_height              lh     lh   rows in each label
+       label_width               lw     lw   columns in each
                                              label
                                              label
-       lines                 lines    li     number of lines on
+       lines                     lines  li   number of lines on
                                              screen or page
                                              screen or page
-       lines_of_memory       lm       lm     lines of memory if &gt;
+       lines_of_memory           lm     lm   lines of memory if &gt;
                                              line. 0 means varies
                                              line. 0 means varies
-       magic_cookie_glitch   xmc      sg     number of blank
+       magic_cookie_glitch       xmc    sg   number of blank
                                              characters left by
                                              smso or rmso
                                              characters left by
                                              smso or rmso
-       max_attributes        ma       ma     maximum combined
+       max_attributes            ma     ma   maximum combined
                                              attributes terminal
                                              can handle
                                              attributes terminal
                                              can handle
-       max_colors            colors   Co     maximum number of
+       max_colors                colors Co   maximum number of
                                              colors on screen
                                              colors on screen
-       max_pairs             pairs    pa     maximum number of
+       max_pairs                 pairs  pa   maximum number of
                                              color-pairs on the
                                              screen
                                              color-pairs on the
                                              screen
-       maximum_windows       wnum     MW     maximum number of
-                                             defineable windows
-       no_color_video        ncv      NC     video attributes
+       maximum_windows           wnum   MW   maximum number of
+                                             definable windows
+       no_color_video            ncv    NC   video attributes
                                              that cannot be used
                                              with colors
                                              that cannot be used
                                              with colors
-       num_labels            nlab     Nl     number of labels on
+       num_labels                nlab   Nl   number of labels on
                                              screen
                                              screen
-       padding_baud_rate     pb       pb     lowest baud rate
+       padding_baud_rate         pb     pb   lowest baud rate
                                              where padding needed
                                              where padding needed
-       virtual_terminal      vt       vt     virtual terminal
+       virtual_terminal          vt     vt   virtual terminal
                                              number (CB/unix)
                                              number (CB/unix)
-       width_status_line     wsl      ws     number of columns in
+       width_status_line         wsl    ws   number of columns in
                                              status line
 
        The following numeric  capabilities  are  present  in  the
                                              status line
 
        The following numeric  capabilities  are  present  in  the
        man page.  They came in with SVr4's printer support.
 
 
        man page.  They came in with SVr4's printer support.
 
 
-             <STRONG>Variable</STRONG>         <STRONG>Cap-</STRONG>    <STRONG>TCap</STRONG>       <STRONG>Description</STRONG>
-             <STRONG>Numeric</STRONG>          <STRONG>name</STRONG>    <STRONG>Code</STRONG>
-       bit_image_entwining    bitwin  Yo     number of passes for
+               <STRONG>Variable</STRONG>          <STRONG>Cap-</STRONG>   <STRONG>TCap</STRONG>     <STRONG>Description</STRONG>
+                <STRONG>Numeric</STRONG>          <STRONG>name</STRONG>   <STRONG>Code</STRONG>
+       bit_image_entwining       bitwin Yo   number of passes for
                                              each bit-image row
                                              each bit-image row
-       bit_image_type         bitype  Yp     type of bit-image
+       bit_image_type            bitype Yp   type of bit-image
                                              device
                                              device
-       buffer_capacity        bufsz   Ya     numbers of bytes
+       buffer_capacity           bufsz  Ya   numbers of bytes
                                              buffered before
                                              printing
                                              buffered before
                                              printing
-       buttons                btns    BT     number of buttons on
+       buttons                   btns   BT   number of buttons on
                                              mouse
                                              mouse
-       dot_horz_spacing       spinh   Yc     spacing of dots hor-
+       dot_horz_spacing          spinh  Yc   spacing of dots hor-
                                              izontally in dots
                                              per inch
 
                                              izontally in dots
                                              per inch
 
-       dot_vert_spacing       spinv   Yb     spacing of pins ver-
+       dot_vert_spacing          spinv  Yb   spacing of pins ver-
                                              tically in pins per
                                              inch
                                              tically in pins per
                                              inch
-       max_micro_address      maddr   Yd     maximum value in
+       max_micro_address         maddr  Yd   maximum value in
                                              micro_..._address
                                              micro_..._address
-       max_micro_jump         mjump   Ye     maximum value in
+       max_micro_jump            mjump  Ye   maximum value in
                                              parm_..._micro
                                              parm_..._micro
-       micro_col_size         mcs     Yf     character step size
+       micro_col_size            mcs    Yf   character step size
                                              when in micro mode
                                              when in micro mode
-       micro_line_size        mls     Yg     line step size when
+       micro_line_size           mls    Yg   line step size when
                                              in micro mode
                                              in micro mode
-       number_of_pins         npins   Yh     numbers of pins in
+       number_of_pins            npins  Yh   numbers of pins in
                                              print-head
                                              print-head
-       output_res_char        orc     Yi     horizontal resolu-
+       output_res_char           orc    Yi   horizontal resolu-
                                              tion in units per
                                              line
                                              tion in units per
                                              line
-       output_res_horz_inch   orhi    Yk     horizontal resolu-
+       output_res_horz_inch      orhi   Yk   horizontal resolu-
                                              tion in units per
                                              inch
                                              tion in units per
                                              inch
-       output_res_line        orl     Yj     vertical resolution
+       output_res_line           orl    Yj   vertical resolution
                                              in units per line
                                              in units per line
-       output_res_vert_inch   orvi    Yl     vertical resolution
+       output_res_vert_inch      orvi   Yl   vertical resolution
                                              in units per inch
                                              in units per inch
-       print_rate             cps     Ym     print rate in char-
+       print_rate                cps    Ym   print rate in char-
                                              acters per second
                                              acters per second
-       wide_char_size         widcs   Yn     character step size
+       wide_char_size            widcs  Yn   character step size
                                              when in double wide
                                              mode
 
                                              when in double wide
                                              mode
 
                                              prototype !?
        create_window             cwin   CW   define a window #1
                                              from #2,#3 to #4,#5
                                              prototype !?
        create_window             cwin   CW   define a window #1
                                              from #2,#3 to #4,#5
-       cursor_address            cup    cm   move to row #1
-                                             columns #2
+       cursor_address            cup    cm   move to row #1 col-
+                                             umns #2
        cursor_down               cud1   do   down one line
        cursor_home               home   ho   home cursor (if no
                                              cup)
        cursor_down               cud1   do   down one line
        cursor_home               home   ho   home cursor (if no
                                              cup)
        zero_motion               zerom  Zx   No motion for subse-
                                              quent character
 
        zero_motion               zerom  Zx   No motion for subse-
                                              quent character
 
-       The  following  string  capabilities  are  present  in the
-       SVr4.0 term structure, but were originally not  documented
+       The following  string  capabilities  are  present  in  the
+       SVr4.0  term structure, but were originally not documented
        in the man page.
 
 
        in the man page.
 
 
                                                multiple codesets
        color_names               colornm  Yw   Give name for
                                                color #1
                                                multiple codesets
        color_names               colornm  Yw   Give name for
                                                color #1
-       define_bit_image_region   defbi    Yx   Define rectan-
-                                               gualar bit image
-                                               region
+       define_bit_image_region   defbi    Yx   Define rectangular
+                                               bit image region
        device_type               devt     dv   Indicate lan-
                                                guage/codeset sup-
                                                port
        device_type               devt     dv   Indicate lan-
                                                guage/codeset sup-
                                                port
        set_page_length           slines   YZ   Set page length to
                                                #1 lines
 
        set_page_length           slines   YZ   Set page length to
                                                #1 lines
 
+
        set_tb_margin             smgtb    MT   Sets both top and
                                                bottom margins to
                                                #1, #2
 
        set_tb_margin             smgtb    MT   Sets both top and
                                                bottom margins to
                                                #1, #2
 
-        The XSI Curses  standard  added  these.   They  are  some
-        post-4.1  versions  of System V curses, e.g., Solaris 2.5
-        and IRIX 6.x.  The <STRONG>ncurses</STRONG> termcap  names  for  them  are
-        invented; according to the XSI Curses standard, they have
-        no termcap names.  If your compiled terminfo entries  use
-        these,  they  may  not be binary-compatible with System V
-        terminfo entries after SVr4.1; beware!
+        The XSI Curses standard added  these  hardcopy  capabili-
+        ties.  They were used in some post-4.1 versions of System
+        V curses, e.g., Solaris 2.5 and IRIX 6.x.  Except for <STRONG>YI</STRONG>,
+        the <STRONG>ncurses</STRONG> termcap names for them are invented.  Accord-
+        ing to the XSI Curses  standard,  they  have  no  termcap
+        names.  If your compiled terminfo entries use these, they
+        may not  be  binary-compatible  with  System  V  terminfo
+        entries after SVr4.1; beware!
 
 
                 <STRONG>Variable</STRONG>         <STRONG>Cap-</STRONG>   <STRONG>TCap</STRONG>     <STRONG>Description</STRONG>
 
 
                 <STRONG>Variable</STRONG>         <STRONG>Cap-</STRONG>   <STRONG>TCap</STRONG>     <STRONG>Description</STRONG>
         set_a_attributes         sgr1   sA   Define second set of
                                              video attributes
                                              #1-#6
         set_a_attributes         sgr1   sA   Define second set of
                                              video attributes
                                              #1-#6
-        set_pglen_inch           slengthsL   YI Set page length
-                                             to #1 hundredth of
-                                             an inch
-
-   <STRONG>A</STRONG> <STRONG>Sample</STRONG> <STRONG>Entry</STRONG>
+        set_pglen_inch           slengthYI   Set page length to
+                                             #1 hundredth of an
+                                             inch (some implemen-
+                                             tations use sL for
+                                             termcap).
+
+
+</PRE><H3><a name="h3-User-Defined-Capabilities">User-Defined Capabilities</a></H3><PRE>
+       The  preceding section listed the <EM>predefined</EM> capabilities.
+       They deal with some  special  features  for  terminals  no
+       longer  (or  possibly never) produced.  Occasionally there
+       are special features of newer terminals which are  awkward
+       or impossible to represent by reusing the predefined capa-
+       bilities.
+
+       <STRONG>ncurses</STRONG> addresses this limitation by allowing user-defined
+       capabilities.  The <STRONG>tic</STRONG> and <STRONG>infocmp</STRONG> programs provide the <STRONG>-x</STRONG>
+       option for this purpose.   When  <STRONG>-x</STRONG>  is  set,  <STRONG>tic</STRONG>  treats
+       unknown  capabilities  as  user-defined.   That is, if <STRONG>tic</STRONG>
+       encounters a capability name which it does not  recognize,
+       it  infers  its  type (boolean, number or string) from the
+       syntax and makes an extended table entry for that capabil-
+       ity.   The <STRONG>use_extended_names</STRONG> function makes this informa-
+       tion conditionally available to applications.  The ncurses
+       library  provides the data leaving most of the behavior to
+       applications:
+
+       <STRONG>o</STRONG>   User-defined capability strings whose name begins with
+           "k" are treated as function keys.
+
+       <STRONG>o</STRONG>   The  types (boolean, number, string) determined by <STRONG>tic</STRONG>
+           can be inferred by successful calls on <STRONG>tigetflag</STRONG>, etc.
+
+       <STRONG>o</STRONG>   If the capability name happens to be  two  characters,
+           the  capability  is also available through the termcap
+           interface.
+
+       While termcap is said to be extensible because it does not
+       use  a  predefined set of capabilities, in practice it has
+       been limited  to  the  capabilities  defined  by  terminfo
+       implementations.   As  a  rule,  user-defined capabilities
+       intended for use by termcap applications should be limited
+       to  booleans  and  numbers  to avoid running past the 1023
+       byte limit assumed by termcap  implementations  and  their
+       applications.   In  particular, providing extended sets of
+       function keys (past the 60 numbered keys and  the  handful
+       of special named keys) is best done using the longer names
+       available using terminfo.
+
+
+</PRE><H3><a name="h3-A-Sample-Entry">A Sample Entry</a></H3><PRE>
        The following entry, describing an ANSI-standard terminal,
        is  representative  of  what a <STRONG>terminfo</STRONG> entry for a modern
        terminal typically looks like.
 
        The following entry, describing an ANSI-standard terminal,
        is  representative  of  what a <STRONG>terminfo</STRONG> entry for a modern
        terminal typically looks like.
 
-     ansi|ansi/pc-term compatible with color,
-             mc5i,
-             colors#8, ncv#3, pairs#64,
-             cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
-             cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
-             ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%p1%dG, ht=\E[I,
-             ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, .indn=\E[%p1%dT,
-             kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
-             kcuf1=\E[C, kcuu1=\E[A, kf1=\E[M, kf10=\E[V,
-             kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P,
-             kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
-             kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
-             op=\E[37;40m, rep=%p1%c\E[%p2%{1}%-%db,
-             rin=\E[%p1%dT, s0ds=\E(B, s1ds=\E)B, s2ds=\E*B,
-             s3ds=\E+B, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-             setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
-             setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
-             sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p8%t;11%;%?%p9%t;12%;m,
-             sgr0=\E[0;10m, tbc=\E[2g, u6=\E[%d;%dR, u7=\E[6n,
-             u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%p1%dd,
+       ansi|ansi/pc-term compatible with color,
+               am, mc5i, mir, msgr,
+               colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
+               acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260
+                    j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303
+                    u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+               bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+               cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+               cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+               cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+               dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+               el1=\E[1K, home=\E[H, hpa=\E[%i%p1%dG, ht=\E[I, hts=\EH,
+               ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+               indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+               kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
+               mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, op=\E[39;49m,
+               rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rin=\E[%p1%dT,
+               rmacs=\E[10m, rmpch=\E[10m, rmso=\E[m, rmul=\E[m,
+               s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B,
+               setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+               sgr=\E[0;10%?%p1%t;7%;
+                          %?%p2%t;4%;
+                          %?%p3%t;7%;
+                          %?%p4%t;5%;
+                          %?%p6%t;1%;
+                          %?%p7%t;8%;
+                          %?%p9%t;11%;m,
+               sgr0=\E[0;10m, smacs=\E[11m, smpch=\E[11m, smso=\E[7m,
+               smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+               u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%i%p1%dd,
 
        Entries may continue onto multiple lines by placing  white
        space  at  the  beginning  of  each line except the first.
 
        Entries may continue onto multiple lines by placing  white
        space  at  the  beginning  of  each line except the first.
-       Comments may be included on lines  beginning  with  ``#''.
-       Capabilities in <EM>terminfo</EM> are of three types: Boolean capa-
-       bilities which indicate that the terminal has some partic-
-       ular  feature, numeric capabilities giving the size of the
-       terminal or the size  of  particular  delays,  and  string
-       capabilities,  which  give a sequence which can be used to
-       perform particular terminal operations.
+       Comments may be included  on  lines  beginning  with  "#".
+       Capabilities in <EM>terminfo</EM> are of three types:
+
+       <STRONG>o</STRONG>   Boolean  capabilities which indicate that the terminal
+           has some particular feature,
 
 
+       <STRONG>o</STRONG>   numeric capabilities giving the size of  the  terminal
+           or the size of particular delays, and
 
 
-   <STRONG>Types</STRONG> <STRONG>of</STRONG> <STRONG>Capabilities</STRONG>
+       <STRONG>o</STRONG>   string  capabilities,  which give a sequence which can
+           be used to perform particular terminal operations.
+
+
+</PRE><H3><a name="h3-Types-of-Capabilities">Types of Capabilities</a></H3><PRE>
        All capabilities have names.  For instance, the fact  that
        ANSI-standard  terminals  have <EM>automatic</EM> <EM>margins</EM> (i.e., an
        automatic return and line-feed when the end of a  line  is
        reached)  is  indicated  by  the capability <STRONG>am</STRONG>.  Hence the
        description of ansi includes <STRONG>am</STRONG>.  Numeric capabilities are
        All capabilities have names.  For instance, the fact  that
        ANSI-standard  terminals  have <EM>automatic</EM> <EM>margins</EM> (i.e., an
        automatic return and line-feed when the end of a  line  is
        reached)  is  indicated  by  the capability <STRONG>am</STRONG>.  Hence the
        description of ansi includes <STRONG>am</STRONG>.  Numeric capabilities are
-       followed  by  the character `#' and then a positive value.
+       followed  by  the character "#" and then a positive value.
        Thus <STRONG>cols</STRONG>, which indicates the number of columns the  ter-
        Thus <STRONG>cols</STRONG>, which indicates the number of columns the  ter-
-       minal  has,  gives  the  value  `80' for ansi.  Values for
+       minal  has,  gives  the  value  "80" for ansi.  Values for
        numeric capabilities may be specified in decimal, octal or
        hexadecimal,  using the C programming language conventions
        (e.g., 255, 0377 and 0xff or 0xFF).
 
        Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear  to
        end of line sequence) are given by the two-character code,
        numeric capabilities may be specified in decimal, octal or
        hexadecimal,  using the C programming language conventions
        (e.g., 255, 0377 and 0xff or 0xFF).
 
        Finally, string valued capabilities, such as <STRONG>el</STRONG> (clear  to
        end of line sequence) are given by the two-character code,
-       an `=', and then a string ending  at  the  next  following
-       `,'.
+       an "=", and then a string ending  at  the  next  following
+       ",".
 
        A  number  of  escape sequences are provided in the string
        valued capabilities for easy encoding of characters there.
        Both  <STRONG>\E</STRONG>  and  <STRONG>\e</STRONG> map to an ESCAPE character, <STRONG>^x</STRONG> maps to a
        control-x for any appropriate x, and the sequences  <STRONG>\n</STRONG>  <STRONG>\l</STRONG>
        <STRONG>\r</STRONG>  <STRONG>\t</STRONG>  <STRONG>\b</STRONG>  <STRONG>\f</STRONG>  <STRONG>\s</STRONG> give a newline, line-feed, return, tab,
 
        A  number  of  escape sequences are provided in the string
        valued capabilities for easy encoding of characters there.
        Both  <STRONG>\E</STRONG>  and  <STRONG>\e</STRONG> map to an ESCAPE character, <STRONG>^x</STRONG> maps to a
        control-x for any appropriate x, and the sequences  <STRONG>\n</STRONG>  <STRONG>\l</STRONG>
        <STRONG>\r</STRONG>  <STRONG>\t</STRONG>  <STRONG>\b</STRONG>  <STRONG>\f</STRONG>  <STRONG>\s</STRONG> give a newline, line-feed, return, tab,
-       backspace, form-feed, and space.  Other escapes include <STRONG>\^</STRONG>
-       for  <STRONG>^</STRONG>, <STRONG>\\</STRONG> for <STRONG>\</STRONG>, <STRONG>\</STRONG>, for comma, <STRONG>\:</STRONG> for <STRONG>:</STRONG>, and <STRONG>\0</STRONG> for null.
-       (<STRONG>\0</STRONG> will produce \200, which does not terminate  a  string
-       but behaves as a null character on most terminals, provid-
-       ing CS7 is specified.  See <STRONG><A HREF="stty.1.html">stty(1)</A></STRONG>.)  Finally,  characters
-       may be given as three octal digits after a <STRONG>\</STRONG>.
+       backspace, form-feed, and space.  Other escapes include
+
+       <STRONG>o</STRONG>   <STRONG>\^</STRONG> for <STRONG>^</STRONG>,
+
+       <STRONG>o</STRONG>   <STRONG>\\</STRONG> for <STRONG>\</STRONG>,
+
+       <STRONG>o</STRONG>   <STRONG>\</STRONG>, for comma,
+
+       <STRONG>o</STRONG>   <STRONG>\:</STRONG> for <STRONG>:</STRONG>,
+
+       <STRONG>o</STRONG>   and <STRONG>\0</STRONG> for null.
+
+           <STRONG>\0</STRONG> will produce  \200,  which  does  not  terminate  a
+           string  but behaves as a null character on most termi-
+           nals, providing CS7 is specified.  See <STRONG>stty(1)</STRONG>.
+
+           The reason for this quirk is to maintain  binary  com-
+           patibility  of  the compiled terminfo files with other
+           implementations, e.g., the SVr4 systems,  which  docu-
+           ment  this.   Compiled  terminfo files use null-termi-
+           nated strings, with no lengths.  Modifying this  would
+           require a new binary format, which would not work with
+           other implementations.
+
+       Finally, characters may be given  as  three  octal  digits
+       after a <STRONG>\</STRONG>.
 
        A  delay  in  milliseconds may appear anywhere in a string
        capability, enclosed in $&lt;..&gt; brackets, as in  <STRONG>el</STRONG>=\EK$&lt;5&gt;,
        and  padding  characters  are supplied by <EM>tputs</EM> to provide
        this delay.  The delay must be a number with at  most  one
        decimal place of precision; it may be followed by suffixes
 
        A  delay  in  milliseconds may appear anywhere in a string
        capability, enclosed in $&lt;..&gt; brackets, as in  <STRONG>el</STRONG>=\EK$&lt;5&gt;,
        and  padding  characters  are supplied by <EM>tputs</EM> to provide
        this delay.  The delay must be a number with at  most  one
        decimal place of precision; it may be followed by suffixes
-       `*' or '/' or both.  A  `*'  indicates  that  the  padding
+       "*" or "/" or both.  A  "*"  indicates  that  the  padding
        required  is  proportional to the number of lines affected
        by the  operation,  and  the  amount  given  is  the  per-
        affected-unit  padding  required.   (In the case of insert
        character,  the  factor  is  still  the  number  of  <EM>lines</EM>
        affected.)   Normally,  padding  is advisory if the device
        has the <STRONG>xon</STRONG> capability; it is used  for  cost  computation
        required  is  proportional to the number of lines affected
        by the  operation,  and  the  amount  given  is  the  per-
        affected-unit  padding  required.   (In the case of insert
        character,  the  factor  is  still  the  number  of  <EM>lines</EM>
        affected.)   Normally,  padding  is advisory if the device
        has the <STRONG>xon</STRONG> capability; it is used  for  cost  computation
-       but  does not trigger delays.  A `/' suffix indicates that
+       but  does not trigger delays.  A "/" suffix indicates that
        the padding is mandatory and forces a delay of  the  given
        number  of  milliseconds  even on devices for which <STRONG>xon</STRONG> is
        present to indicate flow control.
        the padding is mandatory and forces a delay of  the  given
        number  of  milliseconds  even on devices for which <STRONG>xon</STRONG> is
        present to indicate flow control.
        example, see the second <STRONG>ind</STRONG> in the example above.
 
 
        example, see the second <STRONG>ind</STRONG> in the example above.
 
 
-   <STRONG>Fetching</STRONG> <STRONG>Compiled</STRONG> <STRONG>Descriptions</STRONG>
-       If the environment variable TERMINFO is set, it is  inter-
-       preted  as the pathname of a directory containing the com-
-       piled description you are working on.  Only that directory
-       is searched.
-
-       If  TERMINFO  is  not set, the <STRONG>ncurses</STRONG> version of the ter-
-       minfo reader code  will  instead  look  in  the  directory
-       <STRONG>$HOME/.terminfo</STRONG>  for  a compiled description.  If it fails
-       to find one  there,  and  the  environment  variable  TER-
-       MINFO_DIRS  is set, it will interpret the contents of that
-       variable as a list of colon- separated directories  to  be
-       searched  (an  empty  entry is interpreted as a command to
-       search <EM>/usr/share/terminfo</EM>).  If no description  is  found
-       in  any of the TERMINFO_DIRS directories, the fetch fails.
-
-       If neither TERMINFO nor TERMINFO_DIRS  is  set,  the  last
-       place   tried  will  be  the  system  terminfo  directory,
-       <EM>/usr/share/terminfo</EM>.
-
-       (Neither the  <STRONG>$HOME/.terminfo</STRONG>  lookups  nor  TERMINFO_DIRS
-       extensions   are  supported  under  stock  System  V  ter-
-       minfo/curses.)
-
-
-   <STRONG>Preparing</STRONG> <STRONG>Descriptions</STRONG>
-       We now outline how to prepare descriptions  of  terminals.
-       The  most  effective way to prepare a terminal description
-       is by imitating the description of a similar  terminal  in
-       <EM>terminfo</EM>  and  to  build up a description gradually, using
+</PRE><H3><a name="h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></H3><PRE>
+       The <STRONG>ncurses</STRONG> library searches for terminal descriptions  in
+       several places.  It uses only the first description found.
+       The library has a compiled-in list  of  places  to  search
+       which  can be overridden by environment variables.  Before
+       starting to search, <STRONG>ncurses</STRONG> eliminates duplicates  in  its
+       search list.
+
+       <STRONG>o</STRONG>   If  the  environment  variable  TERMINFO is set, it is
+           interpreted as the pathname of a directory  containing
+           the  compiled  description  you  are working on.  Only
+           that directory is searched.
+
+       <STRONG>o</STRONG>   If TERMINFO is not set, <STRONG>ncurses</STRONG> will instead  look  in
+           the  directory <STRONG>$HOME/.terminfo</STRONG> for a compiled descrip-
+           tion.
+
+       <STRONG>o</STRONG>   Next, if the  environment  variable  TERMINFO_DIRS  is
+           set, <STRONG>ncurses</STRONG> will interpret the contents of that vari-
+           able as a  list  of  colon-separated  directories  (or
+           database files) to be searched.
+
+           An  empty directory name (i.e., if the variable begins
+           or ends with a colon, or contains adjacent colons)  is
+           interpreted  as  the  system  location <EM>/usr/share/ter-</EM>
+           <EM>minfo</EM>.
+
+       <STRONG>o</STRONG>   Finally, <STRONG>ncurses</STRONG> searches these compiled-in locations:
+
+           <STRONG>o</STRONG>   a          list           of           directories
+               (/usr/local/ncurses/share/terminfo:/usr/share/ter-
+               minfo), and
+
+           <STRONG>o</STRONG>   the system terminfo directory, <EM>/usr/share/terminfo</EM>
+               (the compiled-in default).
+
+
+</PRE><H3><a name="h3-Preparing-Descriptions">Preparing Descriptions</a></H3><PRE>
+       We  now  outline how to prepare descriptions of terminals.
+       The most effective way to prepare a  terminal  description
+       is  by  imitating the description of a similar terminal in
+       <EM>terminfo</EM> and to build up a  description  gradually,  using
        partial descriptions with <EM>vi</EM> or some other screen-oriented
        partial descriptions with <EM>vi</EM> or some other screen-oriented
-       program  to  check that they are correct.  Be aware that a
+       program to check that they are correct.  Be aware  that  a
        very unusual terminal may expose deficiencies in the abil-
        very unusual terminal may expose deficiencies in the abil-
-       ity  of  the  <EM>terminfo</EM>  file to describe it or bugs in the
+       ity of the <EM>terminfo</EM> file to describe it  or  bugs  in  the
        screen-handling code of the test program.
 
        screen-handling code of the test program.
 
-       To get the padding for insert line right (if the  terminal
+       To  get the padding for insert line right (if the terminal
        manufacturer did not document it) a severe test is to edit
        manufacturer did not document it) a severe test is to edit
-       a large file at 9600 baud, delete 16 or so lines from  the
-       middle  of  the screen, then hit the `u' key several times
-       quickly.  If the terminal messes up, more padding is  usu-
-       ally  needed.  A similar test can be used for insert char-
+       a  large file at 9600 baud, delete 16 or so lines from the
+       middle of the screen, then hit the "u" key  several  times
+       quickly.   If the terminal messes up, more padding is usu-
+       ally needed.  A similar test can be used for insert  char-
        acter.
 
 
        acter.
 
 
-   <STRONG>Basic</STRONG> <STRONG>Capabilities</STRONG>
-       The number of columns on each line  for  the  terminal  is
-       given  by the <STRONG>cols</STRONG> numeric capability.  If the terminal is
-       a CRT, then the number of lines on the screen is given  by
+</PRE><H3><a name="h3-Basic-Capabilities">Basic Capabilities</a></H3><PRE>
+       The  number  of  columns  on each line for the terminal is
+       given by the <STRONG>cols</STRONG> numeric capability.  If the terminal  is
+       a  CRT, then the number of lines on the screen is given by
        the <STRONG>lines</STRONG> capability.  If the terminal wraps around to the
        the <STRONG>lines</STRONG> capability.  If the terminal wraps around to the
-       beginning of the next line when it reaches the right  mar-
+       beginning  of the next line when it reaches the right mar-
        gin, then it should have the <STRONG>am</STRONG> capability.  If the termi-
        gin, then it should have the <STRONG>am</STRONG> capability.  If the termi-
-       nal can clear its screen, leaving the cursor in  the  home
-       position,  then this is given by the <STRONG>clear</STRONG> string capabil-
-       ity.  If the terminal overstrikes (rather than clearing  a
-       position  when  a character is struck over) then it should
-       have the <STRONG>os</STRONG> capability.  If the  terminal  is  a  printing
-       terminal,  with no soft copy unit, give it both <STRONG>hc</STRONG> and <STRONG>os</STRONG>.
-       (<STRONG>os</STRONG> applies to storage scope terminals, such as  TEKTRONIX
-       4010  series, as well as hard copy and APL terminals.)  If
+       nal  can  clear its screen, leaving the cursor in the home
+       position, then this is given by the <STRONG>clear</STRONG> string  capabil-
+       ity.   If the terminal overstrikes (rather than clearing a
+       position when a character is struck over) then  it  should
+       have  the  <STRONG>os</STRONG>  capability.   If the terminal is a printing
+       terminal, with no soft copy unit, give it both <STRONG>hc</STRONG> and  <STRONG>os</STRONG>.
+       (<STRONG>os</STRONG>  applies to storage scope terminals, such as TEKTRONIX
+       4010 series, as well as hard copy and APL terminals.)   If
        there is a code to move the cursor to the left edge of the
        current row, give this as <STRONG>cr</STRONG>.  (Normally this will be car-
        there is a code to move the cursor to the left edge of the
        current row, give this as <STRONG>cr</STRONG>.  (Normally this will be car-
-       riage return, control M.)  If there is a code  to  produce
+       riage  return,  control M.)  If there is a code to produce
        an audible signal (bell, beep, etc) give this as <STRONG>bel</STRONG>.
 
        an audible signal (bell, beep, etc) give this as <STRONG>bel</STRONG>.
 
-       If  there is a code to move the cursor one position to the
-       left (such as backspace) that capability should  be  given
-       as  <STRONG>cub1</STRONG>.   Similarly, codes to move to the right, up, and
+       If there is a code to move the cursor one position to  the
+       left  (such  as backspace) that capability should be given
+       as <STRONG>cub1</STRONG>.  Similarly, codes to move to the right,  up,  and
        down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and <STRONG>cud1</STRONG>.  These local
        down should be given as <STRONG>cuf1</STRONG>, <STRONG>cuu1</STRONG>, and <STRONG>cud1</STRONG>.  These local
-       cursor  motions  should not alter the text they pass over,
-       for example, you would not normally use  `<STRONG>cuf1</STRONG>= '  because
+       cursor motions should not alter the text they  pass  over,
+       for  example,  you would not normally use "<STRONG>cuf1</STRONG>= " because
        the space would erase the character moved over.
 
        the space would erase the character moved over.
 
-       A  very  important  point  here  is  that the local cursor
-       motions encoded in <EM>terminfo</EM> are undefined at the left  and
-       top  edges  of  a  CRT  terminal.   Programs  should never
-       attempt to backspace around the left edge,  unless  <STRONG>bw</STRONG>  is
+       A very important point  here  is  that  the  local  cursor
+       motions  encoded in <EM>terminfo</EM> are undefined at the left and
+       top edges  of  a  CRT  terminal.   Programs  should  never
+       attempt  to  backspace  around the left edge, unless <STRONG>bw</STRONG> is
        given, and never attempt to go up locally off the top.  In
        given, and never attempt to go up locally off the top.  In
-       order to scroll text up, a program will go to  the  bottom
+       order  to  scroll text up, a program will go to the bottom
        left corner of the screen and send the <STRONG>ind</STRONG> (index) string.
 
        To scroll text down, a program goes to the top left corner
        left corner of the screen and send the <STRONG>ind</STRONG> (index) string.
 
        To scroll text down, a program goes to the top left corner
        described as
 
        33|tty33|tty|model 33 teletype,
        described as
 
        33|tty33|tty|model 33 teletype,
-            bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
+               bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
 
        while the Lear Siegler ADM-3 is described as
 
        adm3|3|lsi adm3,
 
        while the Lear Siegler ADM-3 is described as
 
        adm3|3|lsi adm3,
-            am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H, cud1=^J,
-            ind=^J, lines#24,
+               am, bel=^G, clear=^Z, cols#80, cr=^M, cub1=^H, cud1=^J,
+               ind=^J, lines#24,
 
 
 
 
-   <STRONG>Parameterized</STRONG> <STRONG>Strings</STRONG>
+</PRE><H3><a name="h3-Parameterized-Strings">Parameterized Strings</a></H3><PRE>
        Cursor addressing and other strings  requiring  parameters
        in  the  terminal  are described by a parameterized string
        Cursor addressing and other strings  requiring  parameters
        in  the  terminal  are described by a parameterized string
-       capability, with <STRONG><A HREF="printf.3.html">printf(3)</A></STRONG> like escapes  <STRONG>%x</STRONG>  in  it.   For
-       example,  to  address  the  cursor,  the <STRONG>cup</STRONG> capability is
+       capability, with <EM>printf</EM>-like escapes such  as  <EM>%x</EM>  in  it.
+       For  example, to address the cursor, the <STRONG>cup</STRONG> capability is
        given, using two parameters: the row and column to address
        to.  (Rows and columns are numbered from zero and refer to
        the physical screen visible to the user, not to any unseen
        given, using two parameters: the row and column to address
        to.  (Rows and columns are numbered from zero and refer to
        the physical screen visible to the user, not to any unseen
 
        The <STRONG>%</STRONG> encodings have the following meanings:
 
 
        The <STRONG>%</STRONG> encodings have the following meanings:
 
+       <STRONG>%%</STRONG>   outputs "%"
 
 
-       %%   outputs `%'
-
-       %<EM>[[</EM>:<EM>]flags][width[.precision]][</EM>doxXs<EM>]</EM>
-            as in <STRONG>printf</STRONG>, flags are [-+#] and space.  Use  a  `:'
-            to  allow the next character to be a `-' flag, avoid-
+       <STRONG>%</STRONG><EM>[[</EM>:<EM>]flags][width[.precision]][</EM><STRONG>doxXs</STRONG><EM>]</EM>
+            as in <STRONG>printf</STRONG>, flags are <EM>[-+#]</EM> and <EM>space</EM>.  Use  a  ":"
+            to  allow the next character to be a "-" flag, avoid-
             ing interpreting "%-" as an operator.
 
        %c   print pop() like %c in <STRONG>printf</STRONG>
 
             ing interpreting "%-" as an operator.
 
        %c   print pop() like %c in <STRONG>printf</STRONG>
 
-       %s   print pop() like %s in <STRONG>printf</STRONG>
+       <STRONG>%s</STRONG>   print pop() like %s in <STRONG>printf</STRONG>
 
 
-       %p[1-9]
+       <STRONG>%p</STRONG><EM>[1-9]</EM>
             push <EM>i</EM>'th parameter
 
             push <EM>i</EM>'th parameter
 
-       %P[a-z]
-            set dynamic variable [a-z] to pop()
+       <STRONG>%P</STRONG><EM>[a-z]</EM>
+            set dynamic variable <EM>[a-z]</EM> to pop()
 
 
-       %g[a-z]
-            get dynamic variable [a-z] and push it
+       <STRONG>%g</STRONG><EM>[a-z]/</EM>
+            get dynamic variable <EM>[a-z]</EM> and push it
 
 
-       %P[A-Z]
-            set static variable [a-z] to pop()
+       <STRONG>%P</STRONG><EM>[A-Z]</EM>
+            set static variable <EM>[a-z]</EM> to <EM>pop()</EM>
 
 
-       %g[A-Z]
-            get static variable [a-z] and push it
+       <STRONG>%g</STRONG><EM>[A-Z]</EM>
+            get static variable <EM>[a-z]</EM> and push it
 
             The terms  "static"  and  "dynamic"  are  misleading.
             Historically,  these are simply two different sets of
 
             The terms  "static"  and  "dynamic"  are  misleading.
             Historically,  these are simply two different sets of
             other implementations.  Relying on it will  adversely
             impact portability to other implementations.
 
             other implementations.  Relying on it will  adversely
             impact portability to other implementations.
 
-       %'<EM>c</EM>' char constant <EM>c</EM>
+       <STRONG>%'</STRONG><EM>c</EM><STRONG>'</STRONG> char constant <EM>c</EM>
 
 
-       %{<EM>nn</EM>}
+       <STRONG>%{</STRONG><EM>nn</EM><STRONG>}</STRONG>
             integer constant <EM>nn</EM>
 
             integer constant <EM>nn</EM>
 
-       %l   push strlen(pop)
+       <STRONG>%l</STRONG>   push strlen(pop)
 
 
-       %+ %- %* %/ %m
-            arithmetic (%m is mod): push(pop() op pop())
+       <STRONG>%+</STRONG>, <STRONG>%-</STRONG>, <STRONG>%*</STRONG>, <STRONG>%/</STRONG>, <STRONG>%m</STRONG>
+            arithmetic (%m is mod): <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
 
 
-       %&amp; %| %^
-            bit operations (AND, OR and exclusive-OR): push(pop()
-            op pop())
+       <STRONG>%&amp;</STRONG>, <STRONG>%|</STRONG>, <STRONG>%^</STRONG>
+            bit operations (AND, OR and exclusive-OR): <EM>push(pop()</EM>
+            <EM>op</EM> <EM>pop())</EM>
 
 
-       %= %&gt; %&lt;
-            logical operations: push(pop() op pop())
+       <STRONG>%=</STRONG>, <STRONG>%&gt;</STRONG>, <STRONG>%&lt;</STRONG>
+            logical operations: <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
 
 
-       %A, %O
+       <STRONG>%A</STRONG>, <STRONG>%O</STRONG>
             logical AND and OR operations (for conditionals)
 
             logical AND and OR operations (for conditionals)
 
-       %! %~
+       <STRONG>%!</STRONG>, <STRONG>%~</STRONG>
             unary  operations  (logical  and   bit   complement):
             push(op pop())
 
             unary  operations  (logical  and   bit   complement):
             push(op pop())
 
-       %i   add 1 to first two parameters (for ANSI terminals)
+       <STRONG>%i</STRONG>   add 1 to first two parameters (for ANSI terminals)
 
 
-       %? <EM>expr</EM> %t <EM>thenpart</EM> %e <EM>elsepart</EM> %;
-            This  forms  an  if-then-else.   The  %e  <EM>elsepart</EM> is
-            optional.  Usually the %? <EM>expr</EM> part  pushes  a  value
-            onto  the stack, and %t pops it from the stack, test-
+       <STRONG>%?</STRONG> <EM>expr</EM> <STRONG>%t</STRONG> <EM>thenpart</EM> <STRONG>%e</STRONG> <EM>elsepart</EM> <STRONG>%;</STRONG>
+            This  forms  an  if-then-else.   The  <STRONG>%e</STRONG>  <EM>elsepart</EM> is
+            optional.  Usually the <STRONG>%?</STRONG> <EM>expr</EM> part  pushes  a  value
+            onto  the stack, and <STRONG>%t</STRONG> pops it from the stack, test-
             ing if it is nonzero (true).  If it is zero  (false),
             ing if it is nonzero (true).  If it is zero  (false),
-            control passes to the %e (else) part.
+            control passes to the <STRONG>%e</STRONG> (else) part.
 
             It is possible to form else-if's a la Algol 68:
 
             It is possible to form else-if's a la Algol 68:
-            %? c1 %t b1 %e c2 %t b2 %e c3 %t b3 %e c4 %t b4 %e %;
+            <STRONG>%?</STRONG> c1 <STRONG>%t</STRONG> b1 <STRONG>%e</STRONG> c2 <STRONG>%t</STRONG> b2 <STRONG>%e</STRONG> c3 <STRONG>%t</STRONG> b3 <STRONG>%e</STRONG> c4 <STRONG>%t</STRONG> b4 <STRONG>%e</STRONG> <STRONG>%;</STRONG>
 
             where ci are conditions, bi are bodies.
 
             Use the <STRONG>-f</STRONG> option of <STRONG>tic</STRONG> or <STRONG>infocmp</STRONG> to see the struc-
 
             where ci are conditions, bi are bodies.
 
             Use the <STRONG>-f</STRONG> option of <STRONG>tic</STRONG> or <STRONG>infocmp</STRONG> to see the struc-
-            ture  of  if-the-else's.  Some strings, e.g., <STRONG>sgr</STRONG> can
+            ture of if-then-else's.  Some strings, e.g., <STRONG>sgr</STRONG>  can
             be very complicated when written on one line.  The <STRONG>-f</STRONG>
             be very complicated when written on one line.  The <STRONG>-f</STRONG>
-            option  splits  the  string into lines with the parts
+            option splits the string into lines  with  the  parts
             indented.
 
        Binary operations are in postfix form with the operands in
             indented.
 
        Binary operations are in postfix form with the operands in
-       the  usual  order.   That  is,  to  get  x-5 one would use
-       "%gx%{5}%-".  %P and %g variables  are  persistent  across
+       the usual order.  That  is,  to  get  x-5  one  would  use
+       "%gx%{5}%-".   <STRONG>%P</STRONG>  and  <STRONG>%g</STRONG> variables are persistent across
        escape-string evaluations.
 
        Consider the HP2645, which, to get to row 3 and column 12,
        escape-string evaluations.
 
        Consider the HP2645, which, to get to row 3 and column 12,
-       needs to be sent \E&amp;a12c03Y  padded  for  6  milliseconds.
-       Note  that  the  order of the rows and columns is inverted
-       here, and that the row and column are printed as two  dig-
+       needs  to  be  sent  \E&amp;a12c03Y padded for 6 milliseconds.
+       Note that the order of the rows and  columns  is  inverted
+       here,  and that the row and column are printed as two dig-
        its.  Thus its <STRONG>cup</STRONG> capability is "cup=6\E&amp;%p2%2dc%p1%2dY".
 
        The Microterm ACT-IV needs the current row and column sent
        its.  Thus its <STRONG>cup</STRONG> capability is "cup=6\E&amp;%p2%2dc%p1%2dY".
 
        The Microterm ACT-IV needs the current row and column sent
 
        A final example is the LSI ADM-3a, which uses row and col-
        umn  offset  by  a  blank  character,  thus  "cup=\E=%p1%'
 
        A final example is the LSI ADM-3a, which uses row and col-
        umn  offset  by  a  blank  character,  thus  "cup=\E=%p1%'
-       '%+%c%p2%'  '%+%c".   After sending `\E=', this pushes the
+       '%+%c%p2%'  '%+%c".   After sending "\E=", this pushes the
        first parameter, pushes the ASCII value for a space  (32),
        adds  them  (pushing  the sum on the stack in place of the
        two previous values) and outputs that value as  a  charac-
        first parameter, pushes the ASCII value for a space  (32),
        adds  them  (pushing  the sum on the stack in place of the
        two previous values) and outputs that value as  a  charac-
        More complex arithmetic is possible using the stack.
 
 
        More complex arithmetic is possible using the stack.
 
 
-   <STRONG>Cursor</STRONG> <STRONG>Motions</STRONG>
+</PRE><H3><a name="h3-Cursor-Motions">Cursor Motions</a></H3><PRE>
        If the terminal has a fast way to home the cursor (to very
        upper  left  corner  of  screen) then this can be given as
        <STRONG>home</STRONG>; similarly a fast way of getting to the  lower  left-
        If the terminal has a fast way to home the cursor (to very
        upper  left  corner  of  screen) then this can be given as
        <STRONG>home</STRONG>; similarly a fast way of getting to the  lower  left-
        <STRONG>hpa</STRONG> (horizontal position absolute) and <STRONG>vpa</STRONG> (vertical posi-
        tion absolute).  Sometimes these are shorter than the more
        general two parameter sequence (as with  the  hp2645)  and
        <STRONG>hpa</STRONG> (horizontal position absolute) and <STRONG>vpa</STRONG> (vertical posi-
        tion absolute).  Sometimes these are shorter than the more
        general two parameter sequence (as with  the  hp2645)  and
-       can   be   used  in  preference  to  <STRONG>cup</STRONG>.   If  there  are
-       parameterized local motions (e.g., move <EM>n</EM>  spaces  to  the
-       right) these can be given as <STRONG>cud</STRONG>, <STRONG>cub</STRONG>, <STRONG>cuf</STRONG>, and <STRONG>cuu</STRONG> with a
-       single parameter  indicating  how  many  spaces  to  move.
-       These  are  primarily useful if the terminal does not have
-       <STRONG>cup</STRONG>, such as the TEKTRONIX 4025.
+       can be used in preference to <STRONG>cup</STRONG>.  If there are parameter-
+       ized local motions (e.g., move  <EM>n</EM>  spaces  to  the  right)
+       these can be given as <STRONG>cud</STRONG>, <STRONG>cub</STRONG>, <STRONG>cuf</STRONG>, and <STRONG>cuu</STRONG> with a single
+       parameter indicating how many spaces to move.   These  are
+       primarily  useful  if the terminal does not have <STRONG>cup</STRONG>, such
+       as the TEKTRONIX 4025.
 
        If the terminal needs to be in a special mode when running
        a program that uses these capabilities, the codes to enter
 
        If the terminal needs to be in a special mode when running
        a program that uses these capabilities, the codes to enter
        <STRONG>rmcup</STRONG>), specify <STRONG>nrrmc</STRONG>.
 
 
        <STRONG>rmcup</STRONG>), specify <STRONG>nrrmc</STRONG>.
 
 
-   <STRONG>Area</STRONG> <STRONG>Clears</STRONG>
+</PRE><H3><a name="h3-Area-Clears">Area Clears</a></H3><PRE>
        If the terminal can clear from the current position to the
        end  of  the  line,  leaving  the cursor where it is, this
        should be given as <STRONG>el</STRONG>.  If the terminal can clear from the
        If the terminal can clear from the current position to the
        end  of  the  line,  leaving  the cursor where it is, this
        should be given as <STRONG>el</STRONG>.  If the terminal can clear from the
        number of lines, if a true <STRONG>ed</STRONG> is not available.)
 
 
        number of lines, if a true <STRONG>ed</STRONG> is not available.)
 
 
-   <STRONG>Insert/delete</STRONG> <STRONG>line</STRONG> <STRONG>and</STRONG> <STRONG>vertical</STRONG> <STRONG>motions</STRONG>
+</PRE><H3><a name="h3-Insert_delete-line-and-vertical-motions">Insert/delete line and vertical motions</a></H3><PRE>
        If  the terminal can open a new blank line before the line
        where the cursor is, this should be given as <STRONG>il1</STRONG>; this  is
        done  only  from the first position of a line.  The cursor
        If  the terminal can open a new blank line before the line
        where the cursor is, this should be given as <STRONG>il1</STRONG>; this  is
        done  only  from the first position of a line.  The cursor
        bring down non-blank lines.
 
 
        bring down non-blank lines.
 
 
-   <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG>
+</PRE><H3><a name="h3-Insert_Delete-Character">Insert/Delete Character</a></H3><PRE>
        There are two basic kinds of  intelligent  terminals  with
        respect  to insert/delete character which can be described
        using <EM>terminfo.</EM>  The most common  insert/delete  character
        There are two basic kinds of  intelligent  terminals  with
        respect  to insert/delete character which can be described
        using <EM>terminfo.</EM>  The most common  insert/delete  character
        Elmer Owl, make a distinction between  typed  and  untyped
        blanks  on  the  screen, shifting upon an insert or delete
        only to an untyped blank on the  screen  which  is  either
        Elmer Owl, make a distinction between  typed  and  untyped
        blanks  on  the  screen, shifting upon an insert or delete
        only to an untyped blank on the  screen  which  is  either
-       eliminated,  or  expanded  to two untyped blanks.  You can
-       determine the kind of terminal you have  by  clearing  the
-       screen  and  then typing text separated by cursor motions.
-       Type "abc    def" using local cursor motions (not  spaces)
-       between the "abc" and the "def".  Then position the cursor
-       before the "abc" and put the terminal in insert mode.   If
-       typing  characters  causes  the  rest of the line to shift
-       rigidly and characters to fall off the end, then your ter-
-       minal  does  not  distinguish  between  blanks and untyped
-       positions.  If the "abc" shifts over to  the  "def"  which
-       then  move together around the end of the current line and
-       onto the next as you insert, you have the second  type  of
-       terminal,  and should give the capability <STRONG>in</STRONG>, which stands
-       for "insert null".  While these are two logically separate
-       attributes  (one  line  versus multi-line insert mode, and
-       special treatment of untyped spaces) we have seen no  ter-
-       minals whose insert mode cannot be described with the sin-
-       gle attribute.
+       eliminated, or expanded to two untyped blanks.
+
+       You  can determine the kind of terminal you have by clear-
+       ing the screen and then typing text  separated  by  cursor
+       motions.   Type  "abc    def"  using  local cursor motions
+       (not spaces) between the "abc" and the "def".  Then  posi-
+       tion  the  cursor before the "abc" and put the terminal in
+       insert mode.  If typing characters causes the rest of  the
+       line  to shift rigidly and characters to fall off the end,
+       then your terminal does not distinguish between blanks and
+       untyped  positions.  If the "abc" shifts over to the "def"
+       which then move together around the  end  of  the  current
+       line  and onto the next as you insert, you have the second
+       type of terminal, and should give the capability <STRONG>in</STRONG>, which
+       stands for "insert null".
+
+       While  these  are  two  logically separate attributes (one
+       line versus multi-line insert mode, and special  treatment
+       of  untyped spaces) we have seen no terminals whose insert
+       mode cannot be described with the single attribute.
 
        Terminfo can describe both terminals which have an  insert
        mode, and terminals which send a simple sequence to open a
        blank position on the current  line.   Give  as  <STRONG>smir</STRONG>  the
        sequence  to  get  into  insert  mode.   Give  as <STRONG>rmir</STRONG> the
        sequence to leave insert  mode.   Now  give  as  <STRONG>ich1</STRONG>  any
 
        Terminfo can describe both terminals which have an  insert
        mode, and terminals which send a simple sequence to open a
        blank position on the current  line.   Give  as  <STRONG>smir</STRONG>  the
        sequence  to  get  into  insert  mode.   Give  as <STRONG>rmir</STRONG> the
        sequence to leave insert  mode.   Now  give  as  <STRONG>ich1</STRONG>  any
-       sequence  needed  to  be  sent  just  before  sending  the
-       character to be inserted.   Most  terminals  with  a  true
-       insert  mode  will  not  give <STRONG>ich1</STRONG>; terminals which send a
-       sequence to open a screen position should give it here.
+       sequence needed to be sent just before sending the charac-
+       ter to be inserted.  Most terminals  with  a  true  insert
+       mode  will  not give <STRONG>ich1</STRONG>; terminals which send a sequence
+       to open a screen position should give it here.
 
        If your terminal has both, insert mode is usually  prefer-
        able  to  <STRONG>ich1</STRONG>.   Technically,  you  should  not give both
 
        If your terminal has both, insert mode is usually  prefer-
        able  to  <STRONG>ich1</STRONG>.   Technically,  you  should  not give both
        milliseconds  in <STRONG>ip</STRONG> (a string option).  Any other sequence
        which may need to be sent after  an  insert  of  a  single
        character may also be given in <STRONG>ip</STRONG>.  If your terminal needs
        milliseconds  in <STRONG>ip</STRONG> (a string option).  Any other sequence
        which may need to be sent after  an  insert  of  a  single
        character may also be given in <STRONG>ip</STRONG>.  If your terminal needs
-       both to be placed into an `insert mode' and a special code
+       both to be placed into an "insert mode" and a special code
        to  precede  each  inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG>
        and <STRONG>ich1</STRONG> can be given, and both will  be  used.   The  <STRONG>ich</STRONG>
        capability, with one parameter, <EM>n</EM>, will repeat the effects
        of <STRONG>ich1</STRONG> <EM>n</EM> times.
 
        If padding is necessary between characters typed while not
        to  precede  each  inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG>
        and <STRONG>ich1</STRONG> can be given, and both will  be  used.   The  <STRONG>ich</STRONG>
        capability, with one parameter, <EM>n</EM>, will repeat the effects
        of <STRONG>ich1</STRONG> <EM>n</EM> times.
 
        If padding is necessary between characters typed while not
-       in  insert  mode,  give  this  as a number of milliseconds
-       padding in <STRONG>rmp</STRONG>.
+       in insert mode, give this as a number of milliseconds pad-
+       ding in <STRONG>rmp</STRONG>.
 
        It is occasionally  necessary  to  move  around  while  in
        insert  mode  to delete characters on the same line (e.g.,
 
        It is occasionally  necessary  to  move  around  while  in
        insert  mode  to delete characters on the same line (e.g.,
        with one parameter.
 
 
        with one parameter.
 
 
-   <STRONG>Highlighting,</STRONG> <STRONG>Underlining,</STRONG> <STRONG>and</STRONG> <STRONG>Visible</STRONG> <STRONG>Bells</STRONG>
+</PRE><H3><a name="h3-Highlighting_-Underlining_-and-Visible-Bells">Highlighting, Underlining, and Visible Bells</a></H3><PRE>
        If  your  terminal  has  one  or  more  kinds  of  display
        attributes, these can be represented in a number  of  dif-
        ferent ways.  You should choose one display form as <EM>stand-</EM>
        If  your  terminal  has  one  or  more  kinds  of  display
        attributes, these can be represented in a number  of  dif-
        ferent ways.  You should choose one display form as <EM>stand-</EM>
        plus  half-bright  is  good, or reverse video alone.)  The
        sequences to enter and exit standout  mode  are  given  as
        <STRONG>smso</STRONG>  and  <STRONG>rmso</STRONG>, respectively.  If the code to change into
        plus  half-bright  is  good, or reverse video alone.)  The
        sequences to enter and exit standout  mode  are  given  as
        <STRONG>smso</STRONG>  and  <STRONG>rmso</STRONG>, respectively.  If the code to change into
-       or out of standout mode  leaves  one  or  even  two  blank
-       spaces  on the screen, as the TVI 912 and Teleray 1061 do,
+       or out of standout mode leaves one or even two blank  spa-
+       ces  on  the  screen,  as the TVI 912 and Teleray 1061 do,
        then <STRONG>xmc</STRONG> should be given to tell how many spaces are left.
 
        then <STRONG>xmc</STRONG> should be given to tell how many spaces are left.
 
-       Codes  to  begin  underlining  and  end underlining can be
-       given as <STRONG>smul</STRONG> and <STRONG>rmul</STRONG> respectively.  If the terminal  has
-       a  code  to  underline  the current character and move the
+       Codes to begin underlining  and  end  underlining  can  be
+       given  as <STRONG>smul</STRONG> and <STRONG>rmul</STRONG> respectively.  If the terminal has
+       a code to underline the current  character  and  move  the
        cursor one space to the right, such as the Microterm Mime,
        this can be given as <STRONG>uc</STRONG>.
 
        cursor one space to the right, such as the Microterm Mime,
        this can be given as <STRONG>uc</STRONG>.
 
-       Other  capabilities  to  enter  various highlighting modes
-       include <STRONG>blink</STRONG> (blinking) <STRONG>bold</STRONG> (bold or extra  bright)  <STRONG>dim</STRONG>
-       (dim  or  half-bright)  <STRONG>invis</STRONG> (blanking or invisible text)
-       <STRONG>prot</STRONG> (protected) <STRONG>rev</STRONG> (reverse video) <STRONG>sgr0</STRONG>  (turn  off  <EM>all</EM>
-       attribute  modes)  <STRONG>smacs</STRONG>  (enter  alternate  character set
-       mode) and  <STRONG>rmacs</STRONG>  (exit  alternate  character  set  mode).
-       Turning  on  any of these modes singly may or may not turn
+       Other capabilities to  enter  various  highlighting  modes
+       include  <STRONG>blink</STRONG>  (blinking) <STRONG>bold</STRONG> (bold or extra bright) <STRONG>dim</STRONG>
+       (dim or half-bright) <STRONG>invis</STRONG> (blanking  or  invisible  text)
+       <STRONG>prot</STRONG>  (protected)  <STRONG>rev</STRONG>  (reverse video) <STRONG>sgr0</STRONG> (turn off <EM>all</EM>
+       attribute modes)  <STRONG>smacs</STRONG>  (enter  alternate  character  set
+       mode)  and  <STRONG>rmacs</STRONG>  (exit  alternate  character  set mode).
+       Turning on any of these modes singly may or may  not  turn
        off other modes.
 
        off other modes.
 
-       If there is a sequence to set  arbitrary  combinations  of
-       modes,  this should be given as <STRONG>sgr</STRONG> (set attributes), tak-
-       ing 9 parameters.  Each parameter is either 0 or  nonzero,
+       If  there  is  a sequence to set arbitrary combinations of
+       modes, this should be given as <STRONG>sgr</STRONG> (set attributes),  tak-
+       ing  9 parameters.  Each parameter is either 0 or nonzero,
        as the corresponding attribute is on or off.  The 9 param-
        as the corresponding attribute is on or off.  The 9 param-
-       eters are, in order: standout, underline, reverse,  blink,
-       dim,  bold,  blank, protect, alternate character set.  Not
-       all modes need be supported by <STRONG>sgr</STRONG>, only those  for  which
+       eters  are, in order: standout, underline, reverse, blink,
+       dim, bold, blank, protect, alternate character  set.   Not
+       all  modes  need be supported by <STRONG>sgr</STRONG>, only those for which
        corresponding separate attribute commands exist.
 
        For example, the DEC vt220 supports most of the modes:
 
        corresponding separate attribute commands exist.
 
        For example, the DEC vt220 supports most of the modes:
 
-
-           <STRONG>tparm</STRONG> <STRONG>parameter</STRONG>   <STRONG>attribute</STRONG>    <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
-
-           none              none         \E[0m
-           p1                standout     \E[0;1;7m
-           p2                underline    \E[0;4m
-           p3                reverse      \E[0;7m
-           p4                blink        \E[0;5m
-           p5                dim          not available
-           p6                bold         \E[0;1m
-           p7                invis        \E[0;8m
-           p8                protect      not used
-           p9                altcharset   ^O (off) ^N (on)
-
-       We  begin each escape sequence by turning off any existing
-       modes, since there is no quick way  to  determine  whether
+        <STRONG>tparm</STRONG> <STRONG>parameter</STRONG>      <STRONG>attribute</STRONG>        <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
+
+        none                 none             \E[0m
+        p1                   standout         \E[0;1;7m
+        p2                   underline        \E[0;4m
+        p3                   reverse          \E[0;7m
+        p4                   blink            \E[0;5m
+        p5                   dim              not available
+        p6                   bold             \E[0;1m
+        p7                   invis            \E[0;8m
+        p8                   protect          not used
+        p9                   altcharset       ^O (off) ^N (on)
+
+       We begin each escape sequence by turning off any  existing
+       modes,  since  there  is no quick way to determine whether
        they are active.  Standout is set up to be the combination
        they are active.  Standout is set up to be the combination
-       of reverse and bold.  The vt220  terminal  has  a  protect
-       mode,  though  it  is  not commonly used in sgr because it
-       protects characters on the screen  from  the  host's  era-
-       sures.   The  altcharset mode also is different in that it
-       is either ^O or ^N, depending on whether it is off or  on.
-       If  all  modes  are  turned  on, the resulting sequence is
+       of  reverse  and  bold.   The vt220 terminal has a protect
+       mode, though it is not commonly used  in  sgr  because  it
+       protects  characters  on  the  screen from the host's era-
+       sures.  The altcharset mode also is different in  that  it
+       is  either ^O or ^N, depending on whether it is off or on.
+       If all modes are turned  on,  the  resulting  sequence  is
        \E[0;1;4;5;7;8m^N.
 
        \E[0;1;4;5;7;8m^N.
 
-       Some sequences are common to different modes.   For  exam-
-       ple,  ;7  is output when either p1 or p3 is true, that is,
+       Some  sequences  are common to different modes.  For exam-
+       ple, ;7 is output when either p1 or p3 is true,  that  is,
        if either standout or reverse modes are turned on.
 
        if either standout or reverse modes are turned on.
 
-       Writing out the above sequences, along with  their  depen-
+       Writing  out  the above sequences, along with their depen-
        dencies yields
 
        dencies yields
 
+      <STRONG>sequence</STRONG>             <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG>      <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
 
 
-         <STRONG>sequence</STRONG>    <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG>     <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
-
-         \E[0       always              \E[0
-         ;1         if p1 or p6         %?%p1%p6%|%t;1%;
-         ;4         if p2               %?%p2%|%t;4%;
-         ;5         if p4               %?%p4%|%t;5%;
-
-         ;7         if p1 or p3         %?%p1%p3%|%t;7%;
-         ;8         if p7               %?%p7%|%t;8%;
-         m          always              m
-         ^N or ^O   if p9 ^N, else ^O   %?%p9%t^N%e^O%;
+      \E[0                 always              \E[0
+      ;1                   if p1 or p6         %?%p1%p6%|%t;1%;
+      ;4                   if p2               %?%p2%|%t;4%;
+      ;5                   if p4               %?%p4%|%t;5%;
+      ;7                   if p1 or p3         %?%p1%p3%|%t;7%;
+      ;8                   if p7               %?%p7%|%t;8%;
+      m                    always              m
+      ^N or ^O             if p9 ^N, else ^O   %?%p9%t^N%e^O%;
 
        Putting this all together into the sgr sequence gives:
 
 
        Putting this all together into the sgr sequence gives:
 
-           sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;
-               %?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+           sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p4%t;5%;
+               %?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
 
 
-       Remember  that  if  you specify sgr, you must also specify
-       sgr0.  Also, some implementations rely on sgr being  given
-       if  sgr0  is, Not all terminfo entries necessarily have an
-       sgr string, however.  Many terminfo  entries  are  derived
-       from  termcap  entries which have no sgr string.  The only
-       drawback to adding an sgr  string  is  that  termcap  also
-       assumes  that  sgr0  does not exit alternate character set
+       Remember that if you specify sgr, you  must  also  specify
+       sgr0.   Also, some implementations rely on sgr being given
+       if sgr0 is, Not all terminfo entries necessarily  have  an
+       sgr  string,  however.   Many terminfo entries are derived
+       from termcap entries which have no sgr string.   The  only
+       drawback  to  adding  an  sgr  string is that termcap also
+       assumes that sgr0 does not exit  alternate  character  set
        mode.
 
        mode.
 
-       Terminals with the ``magic cookie'' glitch  (<STRONG>xmc</STRONG>)  deposit
-       special   ``cookies''   when   they  receive  mode-setting
-       sequences, which affect the display algorithm rather  than
-       having  extra  bits  for  each character.  Some terminals,
-       such as the HP 2621,  automatically  leave  standout  mode
-       when  they  move to a new line or the cursor is addressed.
-       Programs using standout mode  should  exit  standout  mode
-       before  moving the cursor or sending a newline, unless the
-       <STRONG>msgr</STRONG> capability, asserting that it  is  safe  to  move  in
+       Terminals  with  the  "magic  cookie" glitch (<STRONG>xmc</STRONG>) deposit
+       special   "cookies"   when   they   receive   mode-setting
+       sequences,  which affect the display algorithm rather than
+       having extra bits for  each  character.   Some  terminals,
+       such  as  the  HP  2621, automatically leave standout mode
+       when they move to a new line or the cursor  is  addressed.
+       Programs  using  standout  mode  should exit standout mode
+       before moving the cursor or sending a newline, unless  the
+       <STRONG>msgr</STRONG>  capability,  asserting  that  it  is safe to move in
        standout mode, is present.
 
        standout mode, is present.
 
-       If  the terminal has a way of flashing the screen to indi-
-       cate an error quietly (a bell replacement) then  this  can
+       If the terminal has a way of flashing the screen to  indi-
+       cate  an  error quietly (a bell replacement) then this can
        be given as <STRONG>flash</STRONG>; it must not move the cursor.
 
        be given as <STRONG>flash</STRONG>; it must not move the cursor.
 
-       If  the  cursor  needs to be made more visible than normal
+       If the cursor needs to be made more  visible  than  normal
        when it is not on the bottom line (to make, for example, a
        when it is not on the bottom line (to make, for example, a
-       non-blinking  underline  into  an  easier to find block or
+       non-blinking underline into an easier  to  find  block  or
        blinking underline) give this sequence as <STRONG>cvvis</STRONG>.  If there
        blinking underline) give this sequence as <STRONG>cvvis</STRONG>.  If there
-       is  a  way  to  make the cursor completely invisible, give
+       is a way to make the  cursor  completely  invisible,  give
        that as <STRONG>civis</STRONG>.  The capability <STRONG>cnorm</STRONG> should be given which
        undoes the effects of both of these modes.
 
        If your terminal correctly generates underlined characters
        that as <STRONG>civis</STRONG>.  The capability <STRONG>cnorm</STRONG> should be given which
        undoes the effects of both of these modes.
 
        If your terminal correctly generates underlined characters
-       (with no special codes needed) even  though  it  does  not
-       overstrike,  then you should give the capability <STRONG>ul</STRONG>.  If a
-       character overstriking another leaves both  characters  on
+       (with  no  special  codes  needed) even though it does not
+       overstrike, then you should give the capability <STRONG>ul</STRONG>.  If  a
+       character  overstriking  another leaves both characters on
        the screen, specify the capability <STRONG>os</STRONG>.  If overstrikes are
        the screen, specify the capability <STRONG>os</STRONG>.  If overstrikes are
-       erasable with a blank, then this should  be  indicated  by
+       erasable  with  a  blank, then this should be indicated by
        giving <STRONG>eo</STRONG>.
 
 
        giving <STRONG>eo</STRONG>.
 
 
-   <STRONG>Keypad</STRONG> <STRONG>and</STRONG> <STRONG>Function</STRONG> <STRONG>Keys</STRONG>
+</PRE><H3><a name="h3-Keypad-and-Function-Keys">Keypad and Function Keys</a></H3><PRE>
        If the terminal has a keypad that transmits codes when the
        If the terminal has a keypad that transmits codes when the
-       keys are pressed, this information  can  be  given.   Note
+       keys  are  pressed,  this  information can be given.  Note
        that it is not possible to handle terminals where the key-
        pad only works in local (this applies, for example, to the
        that it is not possible to handle terminals where the key-
        pad only works in local (this applies, for example, to the
-       unshifted  HP  2621  keys).   If  the keypad can be set to
-       transmit or not transmit, give these  codes  as  <STRONG>smkx</STRONG>  and
+       unshifted HP 2621 keys).  If the  keypad  can  be  set  to
+       transmit  or  not  transmit,  give these codes as <STRONG>smkx</STRONG> and
        <STRONG>rmkx</STRONG>.  Otherwise the keypad is assumed to always transmit.
        <STRONG>rmkx</STRONG>.  Otherwise the keypad is assumed to always transmit.
+
        The codes sent by the left arrow, right arrow,  up  arrow,
        down  arrow,  and  home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG>
        <STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG> respectively.  If there are  func-
        tion  keys  such  as f0, f1, ..., f10, the codes they send
        can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>.  If these  keys  have
        labels  other  than the default f0 through f10, the labels
        The codes sent by the left arrow, right arrow,  up  arrow,
        down  arrow,  and  home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG>
        <STRONG>kcuu1,</STRONG> <STRONG>kcud1,</STRONG> and <STRONG>khome</STRONG> respectively.  If there are  func-
        tion  keys  such  as f0, f1, ..., f10, the codes they send
        can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG> <STRONG>kf10</STRONG>.  If these  keys  have
        labels  other  than the default f0 through f10, the labels
-       can  be  given  as  <STRONG>lf0,</STRONG>  <STRONG>lf1,</STRONG>  <STRONG>...,</STRONG>  <STRONG>lf10</STRONG>.    The   codes
-       transmitted  by  certain  other special keys can be given:
-       <STRONG>kll</STRONG> (home down), <STRONG>kbs</STRONG> (backspace), <STRONG>ktbc</STRONG> (clear  all  tabs),
-       <STRONG>kctab</STRONG>  (clear  the  tab  stop in this column), <STRONG>kclr</STRONG> (clear
-       screen or  erase  key),  <STRONG>kdch1</STRONG>  (delete  character),  <STRONG>kdl1</STRONG>
-       (delete line), <STRONG>krmir</STRONG> (exit insert mode), <STRONG>kel</STRONG> (clear to end
-       of line), <STRONG>ked</STRONG> (clear to  end  of  screen),  <STRONG>kich1</STRONG>  (insert
-       character  or  enter insert mode), <STRONG>kil1</STRONG> (insert line), <STRONG>knp</STRONG>
-       (next  page),  <STRONG>kpp</STRONG>  (previous  page),  <STRONG>kind</STRONG>  (scroll  for-
-       ward/down), <STRONG>kri</STRONG> (scroll backward/up), <STRONG>khts</STRONG> (set a tab stop
-       in this column).  In addition, if the keypad has a 3 by  3
-       array  of  keys  including  the four arrow keys, the other
-       five keys can be given as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>,  <STRONG>kb2</STRONG>,  <STRONG>kc1</STRONG>,  and  <STRONG>kc3</STRONG>.
-       These  keys are useful when the effects of a 3 by 3 direc-
-       tional pad are needed.
-
-       Strings to program function keys can be  given  as  <STRONG>pfkey</STRONG>,
-       <STRONG>pfloc</STRONG>,  and <STRONG>pfx</STRONG>.  A string to program screen labels should
-       be specified as <STRONG>pln</STRONG>.  Each  of  these  strings  takes  two
-       parameters:  the function key number to program (from 0 to
-       10) and the string to program it with.  Function key  num-
-       bers  out  of  this  range may program undefined keys in a
-       terminal dependent manner.   The  difference  between  the
-       capabilities  is  that <STRONG>pfkey</STRONG> causes pressing the given key
-       to be the same as the user typing the given string;  <STRONG>pfloc</STRONG>
+       can be given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>.
+
+       The codes transmitted by certain other special keys can be
+       given:
+
+       <STRONG>o</STRONG>   <STRONG>kll</STRONG> (home down),
+
+       <STRONG>o</STRONG>   <STRONG>kbs</STRONG> (backspace),
+
+       <STRONG>o</STRONG>   <STRONG>ktbc</STRONG> (clear all tabs),
+
+       <STRONG>o</STRONG>   <STRONG>kctab</STRONG> (clear the tab stop in this column),
+
+       <STRONG>o</STRONG>   <STRONG>kclr</STRONG> (clear screen or erase key),
+
+       <STRONG>o</STRONG>   <STRONG>kdch1</STRONG> (delete character),
+
+       <STRONG>o</STRONG>   <STRONG>kdl1</STRONG> (delete line),
+
+       <STRONG>o</STRONG>   <STRONG>krmir</STRONG> (exit insert mode),
+
+       <STRONG>o</STRONG>   <STRONG>kel</STRONG> (clear to end of line),
+
+       <STRONG>o</STRONG>   <STRONG>ked</STRONG> (clear to end of screen),
+
+       <STRONG>o</STRONG>   <STRONG>kich1</STRONG> (insert character or enter insert mode),
+
+       <STRONG>o</STRONG>   <STRONG>kil1</STRONG> (insert line),
+
+       <STRONG>o</STRONG>   <STRONG>knp</STRONG> (next page),
+
+       <STRONG>o</STRONG>   <STRONG>kpp</STRONG> (previous page),
+
+       <STRONG>o</STRONG>   <STRONG>kind</STRONG> (scroll forward/down),
+
+       <STRONG>o</STRONG>   <STRONG>kri</STRONG> (scroll backward/up),
+
+       <STRONG>o</STRONG>   <STRONG>khts</STRONG> (set a tab stop in this column).
+
+       In  addition,  if  the  keypad  has a 3 by 3 array of keys
+       including the four arrow keys, the other five keys can  be
+       given as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>, <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>.  These keys are use-
+       ful when the effects of a  3  by  3  directional  pad  are
+       needed.
+
+       Strings  to  program  function keys can be given as <STRONG>pfkey</STRONG>,
+       <STRONG>pfloc</STRONG>, and <STRONG>pfx</STRONG>.  A string to program screen labels  should
+       be  specified  as  <STRONG>pln</STRONG>.   Each  of these strings takes two
+       parameters: the function key number to program (from 0  to
+       10)  and the string to program it with.  Function key num-
+       bers out of this range may program  undefined  keys  in  a
+       terminal  dependent  manner.   The  difference between the
+       capabilities is that <STRONG>pfkey</STRONG> causes pressing the  given  key
+       to  be the same as the user typing the given string; <STRONG>pfloc</STRONG>
        causes the string to be executed by the terminal in local;
        causes the string to be executed by the terminal in local;
-       and <STRONG>pfx</STRONG> causes the string to be transmitted  to  the  com-
+       and  <STRONG>pfx</STRONG>  causes  the string to be transmitted to the com-
        puter.
 
        The capabilities <STRONG>nlab</STRONG>, <STRONG>lw</STRONG> and <STRONG>lh</STRONG> define the number of pro-
        puter.
 
        The capabilities <STRONG>nlab</STRONG>, <STRONG>lw</STRONG> and <STRONG>lh</STRONG> define the number of pro-
-       grammable screen labels and their width  and  height.   If
-       there  are  commands  to  turn the labels on and off, give
-       them in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>.  <STRONG>smln</STRONG> is normally output after  one
+       grammable  screen  labels  and their width and height.  If
+       there are commands to turn the labels  on  and  off,  give
+       them  in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>.  <STRONG>smln</STRONG> is normally output after one
        or more pln sequences to make sure that the change becomes
        visible.
 
 
        or more pln sequences to make sure that the change becomes
        visible.
 
 
-   <STRONG>Tabs</STRONG> <STRONG>and</STRONG> <STRONG>Initialization</STRONG>
-       If the terminal has hardware tabs, the command to  advance
-       to  the  next tab stop can be given as <STRONG>ht</STRONG> (usually control
-       I).  A ``back-tab'' command which moves  leftward  to  the
-       preceding tab stop can be given as <STRONG>cbt</STRONG>.  By convention, if
-       the teletype modes indicate that tabs are  being  expanded
-       by  the  computer  rather than being sent to the terminal,
-       programs should not  use  <STRONG>ht</STRONG>  or  <STRONG>cbt</STRONG>  even  if  they  are
-       present,  since  the user may not have the tab stops prop-
-       erly set.  If the terminal has  hardware  tabs  which  are
-       initially  set every <EM>n</EM> spaces when the terminal is powered
-       up, the numeric parameter <STRONG>it</STRONG> is given, showing the  number
-       of  spaces  the tabs are set to.  This is normally used by
-       the <EM>tset</EM> command to determine whether to set the mode  for
-       hardware  tab expansion, and whether to set the tab stops.
-       If the terminal has tab stops that can be  saved  in  non-
-       volatile  memory, the terminfo description can assume that
+</PRE><H3><a name="h3-Tabs-and-Initialization">Tabs and Initialization</a></H3><PRE>
+       If  the terminal has hardware tabs, the command to advance
+       to the next tab stop can be given as <STRONG>ht</STRONG>  (usually  control
+       I).  A "back-tab" command which moves leftward to the pre-
+       ceding tab stop can be given as <STRONG>cbt</STRONG>.   By  convention,  if
+       the  teletype  modes indicate that tabs are being expanded
+       by the computer rather than being sent  to  the  terminal,
+       programs  should  not  use  <STRONG>ht</STRONG>  or  <STRONG>cbt</STRONG>  even  if they are
+       present, since the user may not have the tab  stops  prop-
+       erly  set.   If  the  terminal has hardware tabs which are
+       initially set every <EM>n</EM> spaces when the terminal is  powered
+       up,  the numeric parameter <STRONG>it</STRONG> is given, showing the number
+       of spaces the tabs are set to.  This is normally  used  by
+       the  <EM>tset</EM> command to determine whether to set the mode for
+       hardware tab expansion, and whether to set the tab  stops.
+       If  the  terminal  has tab stops that can be saved in non-
+       volatile memory, the terminfo description can assume  that
        they are properly set.
 
        they are properly set.
 
-       Other capabilities include <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and <STRONG>is3</STRONG>,  initializa-
-       tion  strings  for the terminal, <STRONG>iprog</STRONG>, the path name of a
-       program to be run to initialize the terminal, and <STRONG>if</STRONG>,  the
-       name  of  a  file  containing long initialization strings.
-       These strings are expected to set the terminal into  modes
-       consistent  with  the  rest  of  the terminfo description.
+       Other  capabilities include <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and <STRONG>is3</STRONG>, initializa-
+       tion strings for the terminal, <STRONG>iprog</STRONG>, the path name  of  a
+       program  to be run to initialize the terminal, and <STRONG>if</STRONG>, the
+       name of a file  containing  long  initialization  strings.
+       These  strings are expected to set the terminal into modes
+       consistent with the  rest  of  the  terminfo  description.
        They are normally sent to the terminal, by the <EM>init</EM> option
        They are normally sent to the terminal, by the <EM>init</EM> option
-       of  the  <EM>tput</EM>  program,  each time the user logs in.  They
+       of the <EM>tput</EM> program, each time the  user  logs  in.   They
        will be printed in the following order:
 
               run the program
        will be printed in the following order:
 
               run the program
               and finally
                      output <STRONG>is3</STRONG>.
 
               and finally
                      output <STRONG>is3</STRONG>.
 
-       Most initialization is done with  <STRONG>is2</STRONG>.   Special  terminal
+       Most  initialization  is  done with <STRONG>is2</STRONG>.  Special terminal
        modes can be set up without duplicating strings by putting
        modes can be set up without duplicating strings by putting
-       the common sequences in <STRONG>is2</STRONG> and special cases in  <STRONG>is1</STRONG>  and
+       the  common  sequences in <STRONG>is2</STRONG> and special cases in <STRONG>is1</STRONG> and
        <STRONG>is3</STRONG>.
 
        A set of sequences that does a harder reset from a totally
        unknown state can be given as <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rf</STRONG> and <STRONG>rs3</STRONG>, analo-
        <STRONG>is3</STRONG>.
 
        A set of sequences that does a harder reset from a totally
        unknown state can be given as <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rf</STRONG> and <STRONG>rs3</STRONG>, analo-
-       gous  to  <STRONG>is1</STRONG>  <STRONG>,</STRONG>  <STRONG>is2</STRONG>  <STRONG>,</STRONG>  <STRONG>if</STRONG>  and <STRONG>is3</STRONG> respectively.  These
-       strings are output by the <EM>reset</EM>  program,  which  is  used
-       when  the terminal gets into a wedged state.  Commands are
-       normally placed in <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if  they  pro-
-       duce  annoying effects on the screen and are not necessary
-       when logging in.  For example,  the  command  to  set  the
-       vt100  into  80-column mode would normally be part of <STRONG>is2</STRONG>,
-       but it causes an annoying glitch of the screen and is  not
-       normally  needed  since the terminal is usually already in
+       gous to <STRONG>is1</STRONG> <STRONG>,</STRONG>  <STRONG>is2</STRONG>  <STRONG>,</STRONG>  <STRONG>if</STRONG>  and  <STRONG>is3</STRONG>  respectively.   These
+       strings  are  output  by  the <EM>reset</EM> program, which is used
+       when the terminal gets into a wedged state.  Commands  are
+       normally  placed  in <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they pro-
+       duce annoying effects on the screen and are not  necessary
+       when  logging  in.   For  example,  the command to set the
+       vt100 into 80-column mode would normally be part  of  <STRONG>is2</STRONG>,
+       but  it causes an annoying glitch of the screen and is not
+       normally needed since the terminal is usually  already  in
        80 column mode.
 
        The <EM>reset</EM> program writes strings including <STRONG>iprog</STRONG>, etc., in
        80 column mode.
 
        The <EM>reset</EM> program writes strings including <STRONG>iprog</STRONG>, etc., in
-       the  same  order  as  the  <EM>init</EM>  program, using <STRONG>rs1</STRONG>, etc.,
+       the same order as  the  <EM>init</EM>  program,  using  <STRONG>rs1</STRONG>,  etc.,
        instead of <STRONG>is1</STRONG>, etc.  If any of <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rs3</STRONG>, or <STRONG>rf</STRONG> reset
        instead of <STRONG>is1</STRONG>, etc.  If any of <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rs3</STRONG>, or <STRONG>rf</STRONG> reset
-       capability  strings  are  missing, the <EM>reset</EM> program falls
+       capability strings are missing, the  <EM>reset</EM>  program  falls
        back  upon  the  corresponding  initialization  capability
        string.
 
        If there are commands to set and clear tab stops, they can
        back  upon  the  corresponding  initialization  capability
        string.
 
        If there are commands to set and clear tab stops, they can
-       be given as <STRONG>tbc</STRONG> (clear all tab stops) and <STRONG>hts</STRONG> (set  a  tab
-       stop  in the current column of every row).  If a more com-
-       plex sequence is needed  to  set  the  tabs  than  can  be
-       described  by  this,  the sequence can be placed in <STRONG>is2</STRONG> or
+       be  given  as <STRONG>tbc</STRONG> (clear all tab stops) and <STRONG>hts</STRONG> (set a tab
+       stop in the current column of every row).  If a more  com-
+       plex  sequence  is  needed  to  set  the  tabs than can be
+       described by this, the sequence can be placed  in  <STRONG>is2</STRONG>  or
        <STRONG>if</STRONG>.
 
        <STRONG>if</STRONG>.
 
-   <STRONG>Delays</STRONG> <STRONG>and</STRONG> <STRONG>Padding</STRONG>
-       Many older and slower  terminals  do  not  support  either
+
+</PRE><H3><a name="h3-Delays-and-Padding">Delays and Padding</a></H3><PRE>
+       Many  older  and  slower  terminals  do not support either
        XON/XOFF or DTR handshaking, including hard copy terminals
        XON/XOFF or DTR handshaking, including hard copy terminals
-       and some very archaic CRTs (including,  for  example,  DEC
-       VT100s).   These may require padding characters after cer-
+       and  some  very  archaic CRTs (including, for example, DEC
+       VT100s).  These may require padding characters after  cer-
        tain cursor motions and screen changes.
 
        If the terminal uses xon/xoff handshaking for flow control
        tain cursor motions and screen changes.
 
        If the terminal uses xon/xoff handshaking for flow control
-       (that  is, it automatically emits ^S back to the host when
+       (that is, it automatically emits ^S back to the host  when
        its input buffers are close to full), set <STRONG>xon</STRONG>.  This capa-
        its input buffers are close to full), set <STRONG>xon</STRONG>.  This capa-
-       bility  suppresses  the emission of padding.  You can also
-       set it for memory-mapped console devices effectively  that
-       do  not  have  a  speed limit.  Padding information should
-       still be included so that routines can make  better  deci-
+       bility suppresses the emission of padding.  You  can  also
+       set  it for memory-mapped console devices effectively that
+       do not have a speed  limit.   Padding  information  should
+       still  be  included so that routines can make better deci-
        sions about relative costs, but actual pad characters will
        not be transmitted.
 
        sions about relative costs, but actual pad characters will
        not be transmitted.
 
-       If <STRONG>pb</STRONG> (padding baud rate) is given, padding is  suppressed
-       at  baud rates below the value of <STRONG>pb</STRONG>.  If the entry has no
-       padding baud rate, then whether padding is emitted or  not
+       If  <STRONG>pb</STRONG> (padding baud rate) is given, padding is suppressed
+       at baud rates below the value of <STRONG>pb</STRONG>.  If the entry has  no
+       padding  baud rate, then whether padding is emitted or not
        is completely controlled by <STRONG>xon</STRONG>.
 
        is completely controlled by <STRONG>xon</STRONG>.
 
-       If  the terminal requires other than a null (zero) charac-
-       ter as a pad, then this can be given  as  <STRONG>pad</STRONG>.   Only  the
+       If the terminal requires other than a null (zero)  charac-
+       ter  as  a  pad,  then this can be given as <STRONG>pad</STRONG>.  Only the
        first character of the <STRONG>pad</STRONG> string is used.
 
 
        first character of the <STRONG>pad</STRONG> string is used.
 
 
-   <STRONG>Status</STRONG> <STRONG>Lines</STRONG>
-       Some  terminals  have  an extra `status line' which is not
-       normally used by software (and thus  not  counted  in  the
+</PRE><H3><a name="h3-Status-Lines">Status Lines</a></H3><PRE>
+       Some terminals have an extra "status line"  which  is  not
+       normally  used  by  software  (and thus not counted in the
        terminal's <STRONG>lines</STRONG> capability).
 
        terminal's <STRONG>lines</STRONG> capability).
 
-       The  simplest  case  is  a  status  line  which is cursor-
-       addressable but not part of the main scrolling  region  on
-       the  screen;  the  Heathkit  H19 has a status line of this
-       kind, as would a 24-line VT100 with  a  23-line  scrolling
-       region  set up on initialization.  This situation is indi-
+       The simplest case  is  a  status  line  which  is  cursor-
+       addressable  but  not part of the main scrolling region on
+       the screen; the Heathkit H19 has a  status  line  of  this
+       kind,  as  would  a 24-line VT100 with a 23-line scrolling
+       region set up on initialization.  This situation is  indi-
        cated by the <STRONG>hs</STRONG> capability.
 
        Some terminals with status lines need special sequences to
        cated by the <STRONG>hs</STRONG> capability.
 
        Some terminals with status lines need special sequences to
-       access  the  status  line.   These  may  be expressed as a
+       access the status line.   These  may  be  expressed  as  a
        string with single parameter <STRONG>tsl</STRONG> which takes the cursor to
        string with single parameter <STRONG>tsl</STRONG> which takes the cursor to
-       a  given zero-origin column on the status line.  The capa-
+       a given zero-origin column on the status line.  The  capa-
        bility <STRONG>fsl</STRONG> must return to the main-screen cursor positions
        bility <STRONG>fsl</STRONG> must return to the main-screen cursor positions
-       before  the  last  <STRONG>tsl</STRONG>.   You may need to embed the string
-       values of <STRONG>sc</STRONG> (save cursor) and <STRONG>rc</STRONG> (restore cursor) in  <STRONG>tsl</STRONG>
+       before the last <STRONG>tsl</STRONG>.  You may need  to  embed  the  string
+       values  of <STRONG>sc</STRONG> (save cursor) and <STRONG>rc</STRONG> (restore cursor) in <STRONG>tsl</STRONG>
        and <STRONG>fsl</STRONG> to accomplish this.
 
        and <STRONG>fsl</STRONG> to accomplish this.
 
-       The  status  line is normally assumed to be the same width
-       as the width of the terminal.  If this is untrue, you  can
+       The status line is normally assumed to be the  same  width
+       as  the width of the terminal.  If this is untrue, you can
        specify it with the numeric capability <STRONG>wsl</STRONG>.
 
        specify it with the numeric capability <STRONG>wsl</STRONG>.
 
-       A  command to erase or blank the status line may be speci-
+       A command to erase or blank the status line may be  speci-
        fied as <STRONG>dsl</STRONG>.
 
        fied as <STRONG>dsl</STRONG>.
 
-       The  boolean  capability  <STRONG>eslok</STRONG>  specifies   that   escape
+       The   boolean   capability  <STRONG>eslok</STRONG>  specifies  that  escape
        sequences, tabs, etc., work ordinarily in the status line.
 
        The <STRONG>ncurses</STRONG> implementation does not yet use any  of  these
        sequences, tabs, etc., work ordinarily in the status line.
 
        The <STRONG>ncurses</STRONG> implementation does not yet use any  of  these
        become important.
 
 
        become important.
 
 
-   <STRONG>Line</STRONG> <STRONG>Graphics</STRONG>
+</PRE><H3><a name="h3-Line-Graphics">Line Graphics</a></H3><PRE>
        Many terminals have alternate character  sets  useful  for
        forms-drawing.   Terminfo  and <STRONG>curses</STRONG> build in support for
        the drawing characters supported by the VT100,  with  some
        characters  from  the  AT&amp;T  4410v1 added.  This alternate
        character set may be specified by the <STRONG>acsc</STRONG> capability.
 
        Many terminals have alternate character  sets  useful  for
        forms-drawing.   Terminfo  and <STRONG>curses</STRONG> build in support for
        the drawing characters supported by the VT100,  with  some
        characters  from  the  AT&amp;T  4410v1 added.  This alternate
        character set may be specified by the <STRONG>acsc</STRONG> capability.
 
-
-                <STRONG>Glyph</STRONG>             <STRONG>ACS</STRONG>            <STRONG>Ascii</STRONG>      <STRONG>VT100</STRONG>
-                 <STRONG>Name</STRONG>             <STRONG>Name</STRONG>           <STRONG>Default</STRONG>    <STRONG>Name</STRONG>
-       UK pound sign              ACS_STERLING   f          }
-       arrow pointing down        ACS_DARROW     v          .
-       arrow pointing left        ACS_LARROW     &lt;          ,
-       arrow pointing right       ACS_RARROW     &gt;          +
-       arrow pointing up          ACS_UARROW     ^          -
-       board of squares           ACS_BOARD      #          h
-       bullet                     ACS_BULLET     o          ~
-       checker board (stipple)    ACS_CKBOARD    :          a
-       degree symbol              ACS_DEGREE     \          f
-       diamond                    ACS_DIAMOND    +          `
-       greater-than-or-equal-to   ACS_GEQUAL     &gt;          z
-       greek pi                   ACS_PI         *          {
-       horizontal line            ACS_HLINE      -          q
-       lantern symbol             ACS_LANTERN    #          i
-       large plus or crossover    ACS_PLUS       +          n
-       less-than-or-equal-to      ACS_LEQUAL     &lt;          y
-
-       lower left corner          ACS_LLCORNER   +          m
-       lower right corner         ACS_LRCORNER   +          j
-       not-equal                  ACS_NEQUAL     !          |
-       plus/minus                 ACS_PLMINUS    #          g
-       scan line 1                ACS_S1         ~          o
-       scan line 3                ACS_S3         -          p
-       scan line 7                ACS_S7         -          r
-       scan line 9                ACS_S9         _          s
-       solid square block         ACS_BLOCK      #          0
-       tee pointing down          ACS_TTEE       +          w
-       tee pointing left          ACS_RTEE       +          u
-       tee pointing right         ACS_LTEE       +          t
-       tee pointing up            ACS_BTEE       +          v
-       upper left corner          ACS_ULCORNER   +          l
-       upper right corner         ACS_URCORNER   +          k
-       vertical line              ACS_VLINE      |          x
+       <STRONG>Glyph</STRONG>                       <STRONG>ACS</STRONG>           <STRONG>Ascii</STRONG>     <STRONG>VT100</STRONG>
+       <STRONG>Name</STRONG>                        <STRONG>Name</STRONG>          <STRONG>Default</STRONG>   <STRONG>Name</STRONG>
+       UK pound sign               ACS_STERLING  f         }
+       arrow pointing down         ACS_DARROW    v         .
+       arrow pointing left         ACS_LARROW    &lt;         ,
+       arrow pointing right        ACS_RARROW    &gt;         +
+       arrow pointing up           ACS_UARROW    ^         -
+       board of squares            ACS_BOARD     #         h
+       bullet                      ACS_BULLET    o         ~
+       checker board (stipple)     ACS_CKBOARD   :         a
+       degree symbol               ACS_DEGREE    \         f
+       diamond                     ACS_DIAMOND   +         `
+       greater-than-or-equal-to    ACS_GEQUAL    &gt;         z
+       greek pi                    ACS_PI        *         {
+       horizontal line             ACS_HLINE     -         q
+       lantern symbol              ACS_LANTERN   #         i
+       large plus or crossover     ACS_PLUS      +         n
+       less-than-or-equal-to       ACS_LEQUAL    &lt;         y
+       lower left corner           ACS_LLCORNER  +         m
+       lower right corner          ACS_LRCORNER  +         j
+       not-equal                   ACS_NEQUAL    !         |
+       plus/minus                  ACS_PLMINUS   #         g
+       scan line 1                 ACS_S1        ~         o
+       scan line 3                 ACS_S3        -         p
+       scan line 7                 ACS_S7        -         r
+       scan line 9                 ACS_S9        _         s
+       solid square block          ACS_BLOCK     #         0
+       tee pointing down           ACS_TTEE      +         w
+       tee pointing left           ACS_RTEE      +         u
+       tee pointing right          ACS_LTEE      +         t
+       tee pointing up             ACS_BTEE      +         v
+       upper left corner           ACS_ULCORNER  +         l
+       upper right corner          ACS_URCORNER  +         k
+       vertical line               ACS_VLINE     |         x
 
        The best way to define a new device's graphics set  is  to
        add  a  column  to a copy of this table for your terminal,
 
        The best way to define a new device's graphics set  is  to
        add  a  column  to a copy of this table for your terminal,
        ACSC string.
 
 
        ACSC string.
 
 
-   <STRONG>Color</STRONG> <STRONG>Handling</STRONG>
-       Most color terminals are either `Tektronix-like'  or  `HP-
-       like'.   Tektronix-like terminals have a predefined set of
+</PRE><H3><a name="h3-Color-Handling">Color Handling</a></H3><PRE>
+       Most color terminals are either "Tektronix-like"  or  "HP-
+       like".   Tektronix-like terminals have a predefined set of
        N colors (where N usually 8), and can  set  character-cell
        foreground and background characters independently, mixing
        them into N * N color-pairs.  On  HP-like  terminals,  the
        N colors (where N usually 8), and can  set  character-cell
        foreground and background characters independently, mixing
        them into N * N color-pairs.  On  HP-like  terminals,  the
        these  as  it  likes,  but  the RGB values indicate normal
        locations in color space.
 
        these  as  it  likes,  but  the RGB values indicate normal
        locations in color space.
 
-
              <STRONG>Color</STRONG>       <STRONG>#define</STRONG>       <STRONG>Value</STRONG>       <STRONG>RGB</STRONG>
              black     <STRONG>COLOR_BLACK</STRONG>       0     0, 0, 0
              red       <STRONG>COLOR_RED</STRONG>         1     max,0,0
              <STRONG>Color</STRONG>       <STRONG>#define</STRONG>       <STRONG>Value</STRONG>       <STRONG>RGB</STRONG>
              black     <STRONG>COLOR_BLACK</STRONG>       0     0, 0, 0
              red       <STRONG>COLOR_RED</STRONG>         1     max,0,0
              magenta   <STRONG>COLOR_MAGENTA</STRONG>     5     max,0,max
              yellow    <STRONG>COLOR_YELLOW</STRONG>      6     max,max,0
              white     <STRONG>COLOR_WHITE</STRONG>       7     max,max,max
              magenta   <STRONG>COLOR_MAGENTA</STRONG>     5     max,0,max
              yellow    <STRONG>COLOR_YELLOW</STRONG>      6     max,max,0
              white     <STRONG>COLOR_WHITE</STRONG>       7     max,max,max
+
        It is important to not confuse the two sets of color capa-
        bilities; otherwise red/blue will be interchanged  on  the
        display.
        It is important to not confuse the two sets of color capa-
        bilities; otherwise red/blue will be interchanged  on  the
        display.
        ors  are  enabled.  The correspondence with the attributes
        understood by <STRONG>curses</STRONG> is as follows:
 
        ors  are  enabled.  The correspondence with the attributes
        understood by <STRONG>curses</STRONG> is as follows:
 
-
-                      <STRONG>Attribute</STRONG>      <STRONG>Bit</STRONG>   <STRONG>Decimal</STRONG>
-                      A_STANDOUT     0     1
-                      A_UNDERLINE    1     2
-                      A_REVERSE      2     4
-                      A_BLINK        3     8
-                      A_DIM          4     16
-                      A_BOLD         5     32
-                      A_INVIS        6     64
-                      A_PROTECT      7     128
-                      A_ALTCHARSET   8     256
+          <STRONG>Attribute</STRONG>              <STRONG>Bit</STRONG>   <STRONG>Decimal</STRONG>      <STRONG>Set</STRONG> <STRONG>by</STRONG>
+          A_STANDOUT             0     1            sgr
+          A_UNDERLINE            1     2            sgr
+          A_REVERSE              2     4            sgr
+          A_BLINK                3     8            sgr
+          A_DIM                  4     16           sgr
+          A_BOLD                 5     32           sgr
+          A_INVIS                6     64           sgr
+          A_PROTECT              7     128          sgr
+          A_ALTCHARSET           8     256          sgr
+          A_HORIZONTAL           9     512          sgr1
+          A_LEFT                 10    1024         sgr1
+          A_LOW                  11    2048         sgr1
+          A_RIGHT                12    4096         sgr1
+          A_TOP                  13    8192         sgr1
+          A_VERTICAL             14    16384        sgr1
+          A_ITALIC               15    32768        sitm
 
        For example,  on  many  IBM  PC  consoles,  the  underline
        attribute  collides  with the foreground color blue and is
 
        For example,  on  many  IBM  PC  consoles,  the  underline
        attribute  collides  with the foreground color blue and is
        and optimizes the output in favor of colors.
 
 
        and optimizes the output in favor of colors.
 
 
-   <STRONG>Miscellaneous</STRONG>
+</PRE><H3><a name="h3-Miscellaneous">Miscellaneous</a></H3><PRE>
        If the terminal requires other than a null (zero)  charac-
        ter  as  a  pad,  then this can be given as pad.  Only the
        first character of the pad string is used.  If the  termi-
        If the terminal requires other than a null (zero)  charac-
        ter  as  a  pad,  then this can be given as pad.  Only the
        first character of the pad string is used.  If the  termi-
        parameterized  string  <STRONG>rep</STRONG>.   The  first  parameter is the
        character to be repeated and the second is the  number  of
        times  to repeat it.  Thus, tparm(repeat_char, 'x', 10) is
        parameterized  string  <STRONG>rep</STRONG>.   The  first  parameter is the
        character to be repeated and the second is the  number  of
        times  to repeat it.  Thus, tparm(repeat_char, 'x', 10) is
-       the same as `xxxxxxxxxx'.
+       the same as "xxxxxxxxxx".
 
        If the terminal has a settable command character, such  as
        the  TEKTRONIX  4025, this can be indicated with <STRONG>cmdch</STRONG>.  A
 
        If the terminal has a settable command character, such  as
        the  TEKTRONIX  4025, this can be indicated with <STRONG>cmdch</STRONG>.  A
        <EM>virtual</EM>   terminal   descriptions  for  which  the  escape
        sequences are known.)
 
        <EM>virtual</EM>   terminal   descriptions  for  which  the  escape
        sequences are known.)
 
-       If the terminal has a ``meta key'' which acts as  a  shift
+       If the terminal has a "meta key" which  acts  as  a  shift
        key,  setting  the  8th  bit of any character transmitted,
        this fact can be indicated with <STRONG>km</STRONG>.   Otherwise,  software
        will assume that the 8th bit is parity and it will usually
        key,  setting  the  8th  bit of any character transmitted,
        this fact can be indicated with <STRONG>km</STRONG>.   Otherwise,  software
        will assume that the 8th bit is parity and it will usually
-       be cleared.  If strings exist to turn this  ``meta  mode''
-       on and off, they can be given as <STRONG>smm</STRONG> and <STRONG>rmm</STRONG>.
+       be cleared.  If strings exist to turn this "meta mode"  on
+       and off, they can be given as <STRONG>smm</STRONG> and <STRONG>rmm</STRONG>.
 
        If  the terminal has more lines of memory than will fit on
        the screen at once, the number of lines of memory  can  be
 
        If  the terminal has more lines of memory than will fit on
        the screen at once, the number of lines of memory  can  be
        printer while an <STRONG>mc5p</STRONG> is in effect.
 
 
        printer while an <STRONG>mc5p</STRONG> is in effect.
 
 
-   <STRONG>Glitches</STRONG> <STRONG>and</STRONG> <STRONG>Braindamage</STRONG>
-       Hazeltine terminals, which do not allow `~' characters  to
+</PRE><H3><a name="h3-Glitches-and-Braindamage">Glitches and Braindamage</a></H3><PRE>
+       Hazeltine terminals, which do not allow "~" characters  to
        be displayed should indicate <STRONG>hz</STRONG>.
 
        Terminals which ignore a line-feed immediately after an <STRONG>am</STRONG>
        wrap, such as the Concept and vt100, should indicate <STRONG>xenl</STRONG>.
 
        be displayed should indicate <STRONG>hz</STRONG>.
 
        Terminals which ignore a line-feed immediately after an <STRONG>am</STRONG>
        wrap, such as the Concept and vt100, should indicate <STRONG>xenl</STRONG>.
 
-       If  <STRONG>el</STRONG>  is  required  to  get  rid of standout (instead of
-       merely writing normal text on top of it),  <STRONG>xhp</STRONG>  should  be
+       If <STRONG>el</STRONG> is required to  get  rid  of  standout  (instead  of
+       merely  writing  normal  text on top of it), <STRONG>xhp</STRONG> should be
        given.
 
        given.
 
-       Teleray  terminals,  where  tabs turn all characters moved
-       over to blanks, should  indicate  <STRONG>xt</STRONG>  (destructive  tabs).
-       Note:    the    variable    indicating    this    is   now
-       `dest_tabs_magic_smso'; in older  versions,  it  was  tel-
+       Teleray terminals, where tabs turn  all  characters  moved
+       over  to  blanks,  should  indicate <STRONG>xt</STRONG> (destructive tabs).
+       Note:   the    variable    indicating    this    is    now
+       "dest_tabs_magic_smso";  in  older  versions,  it was tel-
        eray_glitch.  This glitch is also taken to mean that it is
        eray_glitch.  This glitch is also taken to mean that it is
-       not possible to position the cursor on top  of  a  ``magic
-       cookie'', that to erase standout mode it is instead neces-
+       not  possible  to  position  the cursor on top of a "magic
+       cookie", that to erase standout mode it is instead  neces-
        sary to use delete and insert line.  The ncurses implemen-
        tation ignores this glitch.
 
        sary to use delete and insert line.  The ncurses implemen-
        tation ignores this glitch.
 
-       The  Beehive Superbee, which is unable to correctly trans-
-       mit the escape or control C characters, has <STRONG>xsb</STRONG>,  indicat-
-       ing  that the f1 key is used for escape and f2 for control
-       C.  (Only certain Superbees have this  problem,  depending
-       on  the  ROM.)  Note that in older terminfo versions, this
-       capability  was  called  `beehive_glitch';   it   is   now
-       `no_esc_ctl_c'.
+       The Beehive Superbee, which is unable to correctly  trans-
+       mit  the escape or control C characters, has <STRONG>xsb</STRONG>, indicat-
+       ing that the f1 key is used for escape and f2 for  control
+       C.   (Only  certain Superbees have this problem, depending
+       on the ROM.)  Note that in older terminfo  versions,  this
+       capability   was   called   "beehive_glitch";  it  is  now
+       "no_esc_ctl_c".
 
 
-       Other  specific  terminal  problems  may  be  corrected by
+       Other specific  terminal  problems  may  be  corrected  by
        adding more capabilities of the form <STRONG>x</STRONG><EM>x</EM>.
 
 
        adding more capabilities of the form <STRONG>x</STRONG><EM>x</EM>.
 
 
-   <STRONG>Similar</STRONG> <STRONG>Terminals</STRONG>
+</PRE><H3><a name="h3-Similar-Terminals">Similar Terminals</a></H3><PRE>
        If there are two very similar terminals, one (the variant)
        If there are two very similar terminals, one (the variant)
-       can  be  defined  as  being just like the other (the base)
-       with certain exceptions.  In the definition of  the  vari-
-       ant,  the string capability <STRONG>use</STRONG> can be given with the name
-       of the base terminal.  The capabilities given  before  <STRONG>use</STRONG>
-       override  those  in  the base type named by <STRONG>use</STRONG>.  If there
-       are multiple <STRONG>use</STRONG> capabilities, they are merged in  reverse
-       order.   That is, the rightmost <STRONG>use</STRONG> reference is processed
-       first, then the one to its left, and so forth.   Capabili-
-       ties  given explicitly in the entry override those brought
+       can be defined as being just like  the  other  (the  base)
+       with  certain  exceptions.  In the definition of the vari-
+       ant, the string capability <STRONG>use</STRONG> can be given with the  name
+       of  the  base terminal.  The capabilities given before <STRONG>use</STRONG>
+       override those in the base type named by  <STRONG>use</STRONG>.   If  there
+       are  multiple <STRONG>use</STRONG> capabilities, they are merged in reverse
+       order.  That is, the rightmost <STRONG>use</STRONG> reference is  processed
+       first,  then the one to its left, and so forth.  Capabili-
+       ties given explicitly in the entry override those  brought
        in by <STRONG>use</STRONG> references.
 
        A capability can be canceled by placing <STRONG>xx@</STRONG> to the left of
        in by <STRONG>use</STRONG> references.
 
        A capability can be canceled by placing <STRONG>xx@</STRONG> to the left of
-       the  use  reference that imports it, where <EM>xx</EM> is the capa-
+       the use reference that imports it, where <EM>xx</EM> is  the  capa-
        bility.  For example, the entry
 
        bility.  For example, the entry
 
-                   2621-nl, smkx@, rmkx@, use=2621,
+              2621-nl, smkx@, rmkx@, use=2621,
 
 
-       defines a 2621-nl that does not  have  the  <STRONG>smkx</STRONG>  or  <STRONG>rmkx</STRONG>
-       capabilities,  and hence does not turn on the function key
-       labels when in visual mode.  This is useful for  different
+       defines  a  2621-nl  that  does  not have the <STRONG>smkx</STRONG> or <STRONG>rmkx</STRONG>
+       capabilities, and hence does not turn on the function  key
+       labels  when in visual mode.  This is useful for different
        modes for a terminal, or for different user preferences.
 
 
        modes for a terminal, or for different user preferences.
 
 
-   <STRONG>Pitfalls</STRONG> <STRONG>of</STRONG> <STRONG>Long</STRONG> <STRONG>Entries</STRONG>
-       Long  terminfo  entries  are  unlikely to be a problem; to
-       date, no entry has even  approached  terminfo's  4096-byte
+</PRE><H3><a name="h3-Pitfalls-of-Long-Entries">Pitfalls of Long Entries</a></H3><PRE>
+       Long terminfo entries are unlikely to  be  a  problem;  to
+       date,  no  entry  has even approached terminfo's 4096-byte
        string-table maximum.  Unfortunately, the termcap transla-
        tions are much more strictly limited (to 1023 bytes), thus
        string-table maximum.  Unfortunately, the termcap transla-
        tions are much more strictly limited (to 1023 bytes), thus
-       termcap  translations  of  long terminfo entries can cause
+       termcap translations of long terminfo  entries  can  cause
        problems.
 
        problems.
 
-       The man pages for 4.3BSD and older versions  of  <STRONG>tgetent()</STRONG>
-       instruct  the  user to allocate a 1024-byte buffer for the
-       termcap entry.  The  entry  gets  null-terminated  by  the
+       The  man  pages for 4.3BSD and older versions of <STRONG>tgetent()</STRONG>
+       instruct the user to allocate a 1024-byte buffer  for  the
+       termcap  entry.   The  entry  gets  null-terminated by the
        termcap library, so that makes the maximum safe length for
        termcap library, so that makes the maximum safe length for
-       a termcap entry 1k-1 (1023) bytes.  Depending on what  the
-       application  and  the termcap library being used does, and
+       a  termcap entry 1k-1 (1023) bytes.  Depending on what the
+       application and the termcap library being used  does,  and
        where in the termcap file the terminal type that <STRONG>tgetent()</STRONG>
        is searching for is, several bad things can happen.
 
        where in the termcap file the terminal type that <STRONG>tgetent()</STRONG>
        is searching for is, several bad things can happen.
 
-       Some  termcap libraries print a warning message or exit if
-       they find an entry that's longer than 1023  bytes;  others
-       do  not;  others truncate the entries to 1023 bytes.  Some
+       Some termcap libraries print a warning message or exit  if
+       they  find  an entry that's longer than 1023 bytes; others
+       do not; others truncate the entries to 1023  bytes.   Some
        application programs allocate more than the recommended 1K
        for the termcap entry; others do not.
 
        Each termcap entry has two important sizes associated with
        it: before "tc" expansion, and after "tc" expansion.  "tc"
        application programs allocate more than the recommended 1K
        for the termcap entry; others do not.
 
        Each termcap entry has two important sizes associated with
        it: before "tc" expansion, and after "tc" expansion.  "tc"
-       is  the  capability that tacks on another termcap entry to
-       the end of the current one, to add  on  its  capabilities.
-       If  a termcap entry does not use the "tc" capability, then
+       is the capability that tacks on another termcap  entry  to
+       the  end  of  the current one, to add on its capabilities.
+       If a termcap entry does not use the "tc" capability,  then
        of course the two lengths are the same.
 
        of course the two lengths are the same.
 
-       The "before tc expansion" length  is  the  most  important
-       one,  because it affects more than just users of that par-
-       ticular terminal.  This is the length of the entry  as  it
+       The  "before  tc  expansion"  length is the most important
+       one, because it affects more than just users of that  par-
+       ticular  terminal.   This is the length of the entry as it
        exists in /etc/termcap, minus the backslash-newline pairs,
        which <STRONG>tgetent()</STRONG> strips out while reading it.  Some termcap
        exists in /etc/termcap, minus the backslash-newline pairs,
        which <STRONG>tgetent()</STRONG> strips out while reading it.  Some termcap
-       libraries  strip  off  the final newline, too (GNU termcap
+       libraries strip off the final newline,  too  (GNU  termcap
        does not).  Now suppose:
 
        does not).  Now suppose:
 
-       *    a termcap entry before expansion is  more  than  1023
-            bytes long,
-
-          and the application has only allocated a 1k buffer,
-
-       *    and  the  termcap library (like the one in BSD/OS 1.1
-            and GNU) reads the whole entry into  the  buffer,  no
-            matter  what its length, to see if it is the entry it
-            wants,
-
-       *    and <STRONG>tgetent()</STRONG> is searching for a terminal  type  that
-            either is the long entry, appears in the termcap file
-            after the long entry, or does not appear in the  file
-            at  all  (so  that  <STRONG>tgetent()</STRONG> has to search the whole
-            termcap file).
-
-       Then <STRONG>tgetent()</STRONG> will overwrite memory, perhaps  its  stack,
-       and  probably core dump the program.  Programs like telnet
-       are particularly vulnerable;  modern  telnets  pass  along
-       values  like the terminal type automatically.  The results
-       are almost as undesirable with  a  termcap  library,  like
-       SunOS  4.1.3  and Ultrix 4.4, that prints warning messages
-       when it reads an overly long termcap entry.  If a  termcap
-       library  truncates  long  entries,  like  OSF/1 3.0, it is
-       immune to dying here but will return  incorrect  data  for
+       <STRONG>o</STRONG>   a  termcap  entry  before  expansion is more than 1023
+           bytes long,
+
+       <STRONG>o</STRONG>   and the application has only allocated a 1k buffer,
+
+       <STRONG>o</STRONG>   and the termcap library (like the one  in  BSD/OS  1.1
+           and  GNU)  reads  the  whole entry into the buffer, no
+           matter what its length, to see if it is the  entry  it
+           wants,
+
+       <STRONG>o</STRONG>   and  <STRONG>tgetent()</STRONG>  is  searching for a terminal type that
+           either is the long entry, appears in the termcap  file
+           after  the  long entry, or does not appear in the file
+           at all (so that <STRONG>tgetent()</STRONG>  has  to  search  the  whole
+           termcap file).
+
+       Then  <STRONG>tgetent()</STRONG>  will overwrite memory, perhaps its stack,
+       and probably core dump the program.  Programs like  telnet
+       are  particularly  vulnerable;  modern  telnets pass along
+       values like the terminal type automatically.  The  results
+       are  almost  as  undesirable  with a termcap library, like
+       SunOS 4.1.3 and Ultrix 4.4, that prints  warning  messages
+       when  it reads an overly long termcap entry.  If a termcap
+       library truncates long entries,  like  OSF/1  3.0,  it  is
+       immune  to  dying  here but will return incorrect data for
        the terminal.
 
        The "after tc expansion" length will have a similar effect
        to the above, but only for people who actually set TERM to
        the terminal.
 
        The "after tc expansion" length will have a similar effect
        to the above, but only for people who actually set TERM to
-       that  terminal type, since <STRONG>tgetent()</STRONG> only does "tc" expan-
-       sion once it is found the terminal  type  it  was  looking
+       that terminal type, since <STRONG>tgetent()</STRONG> only does "tc"  expan-
+       sion  once  it  is  found the terminal type it was looking
        for, not while searching.
 
        In summary, a termcap entry that is longer than 1023 bytes
        for, not while searching.
 
        In summary, a termcap entry that is longer than 1023 bytes
-       can cause, on various combinations  of  termcap  libraries
-       and  applications,  a  core  dump,  warnings, or incorrect
-       operation.  If it is too long even before "tc"  expansion,
+       can  cause,  on  various combinations of termcap libraries
+       and applications, a  core  dump,  warnings,  or  incorrect
+       operation.   If it is too long even before "tc" expansion,
        it will have this effect even for users of some other ter-
        it will have this effect even for users of some other ter-
-       minal types and users whose TERM variable does not have  a
+       minal  types and users whose TERM variable does not have a
        termcap entry.
 
        When in -C (translate to termcap) mode, the <STRONG>ncurses</STRONG> imple-
        mentation of <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG> issues warning messages when the pre-
        termcap entry.
 
        When in -C (translate to termcap) mode, the <STRONG>ncurses</STRONG> imple-
        mentation of <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG> issues warning messages when the pre-
-       tc  length  of  a termcap translation is too long.  The -c
-       (check) option also checks resolved (after  tc  expansion)
+       tc length of a termcap translation is too  long.   The  -c
+       (check)  option  also checks resolved (after tc expansion)
        lengths.
 
        lengths.
 
-   <STRONG>Binary</STRONG> <STRONG>Compatibility</STRONG>
-       It  is not wise to count on portability of binary terminfo
-       entries between commercial UNIX versions.  The problem  is
-       that  there  are  at least two versions of terminfo (under
+
+</PRE><H3><a name="h3-Binary-Compatibility">Binary Compatibility</a></H3><PRE>
+       It is not wise to count on portability of binary  terminfo
+       entries  between commercial UNIX versions.  The problem is
+       that there are at least two versions  of  terminfo  (under
        HP-UX and AIX) which diverged from System V terminfo after
        HP-UX and AIX) which diverged from System V terminfo after
-       SVr1,  and have added extension capabilities to the string
-       table that (in the binary format) collide  with  System  V
+       SVr1, and have added extension capabilities to the  string
+       table  that  (in  the binary format) collide with System V
        and XSI Curses extensions.
 
 
        and XSI Curses extensions.
 
 
-</PRE>
-<H2>EXTENSIONS</H2><PRE>
+</PRE><H2><a name="h2-EXTENSIONS">EXTENSIONS</a></H2><PRE>
+       Searching for terminal descriptions in <STRONG>$HOME/.terminfo</STRONG> and
+       TERMINFO_DIRS is not supported by older implementations.
+
        Some  SVr4  <STRONG>curses</STRONG>  implementations,  and  all previous to
        SVr4, do not interpret the %A and %O operators in  parame-
        ter strings.
        Some  SVr4  <STRONG>curses</STRONG>  implementations,  and  all previous to
        SVr4, do not interpret the %A and %O operators in  parame-
        ter strings.
        and emulators like xterm that  can  return  mouse-tracking
        information in the keyboard-input stream.
 
        and emulators like xterm that  can  return  mouse-tracking
        information in the keyboard-input stream.
 
+       X/Open Curses does not mention italics.  Portable applica-
+       tions must assume that  numeric  capabilities  are  signed
+       16-bit  values.   This  includes  the <EM>no</EM><STRONG>_</STRONG><EM>color</EM><STRONG>_</STRONG><EM>video</EM> (ncv)
+       capability.  The 32768 mask value used  for  italics  with
+       ncv  can  be confused with an absent or cancelled ncv.  If
+       italics should work with colors, then the ncv  value  must
+       be specified, even if it is zero.
+
        Different  commercial ports of terminfo and curses support
        different subsets of the XSI Curses standard and (in  some
        cases) different extension sets.  Here is a summary, accu-
        Different  commercial ports of terminfo and curses support
        different subsets of the XSI Curses standard and (in  some
        cases) different extension sets.  Here is a summary, accu-
        through 63, plus a number  of  incompatible  string  table
        extensions.
 
        through 63, plus a number  of  incompatible  string  table
        extensions.
 
-       <STRONG>OSF</STRONG>  -- Supports both the SVr4 set and the AIX extensions.
+       <STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
 
 
 
 
-</PRE>
-<H2>FILES</H2><PRE>
+</PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
        /usr/share/terminfo/?/*  files     containing     terminal
                                 descriptions
 
 
        /usr/share/terminfo/?/*  files     containing     terminal
                                 descriptions
 
 
-</PRE>
-<H2>SEE ALSO</H2><PRE>
-       <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="printf.3.html">printf(3)</A></STRONG>, <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
+</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
+       <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>,  <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>,  <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>,  <STRONG>printf(3)</STRONG>,   <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
+       <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>.
 
 
 
 
-</PRE>
-<H2>AUTHORS</H2><PRE>
+</PRE><H2><a name="h2-AUTHORS">AUTHORS</a></H2><PRE>
        Zeyd  M.  Ben-Halim,  Eric  S.  Raymond, Thomas E. Dickey.
        Based on pcurses by Pavel Curtis.
 
        Zeyd  M.  Ben-Halim,  Eric  S.  Raymond, Thomas E. Dickey.
        Based on pcurses by Pavel Curtis.
 
 
                                                             <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
 </PRE>
 
                                                             <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
 </PRE>
-<HR>
-<ADDRESS>
-Man(1) output converted with
-<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>
-</ADDRESS>
+<div class="nav">
+<ul>
+<li><a href="#h2-NAME">NAME</a></li>
+<li><a href="#h2-SYNOPSIS">SYNOPSIS</a></li>
+<li><a href="#h2-DESCRIPTION">DESCRIPTION</a>
+<ul>
+<li><a href="#h3-Predefined-Capabilities">Predefined Capabilities</a></li>
+<li><a href="#h3-User-Defined-Capabilities">User-Defined Capabilities</a></li>
+<li><a href="#h3-A-Sample-Entry">A Sample Entry</a></li>
+<li><a href="#h3-Types-of-Capabilities">Types of Capabilities</a></li>
+<li><a href="#h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></li>
+<li><a href="#h3-Preparing-Descriptions">Preparing Descriptions</a></li>
+<li><a href="#h3-Basic-Capabilities">Basic Capabilities</a></li>
+<li><a href="#h3-Parameterized-Strings">Parameterized Strings</a></li>
+<li><a href="#h3-Cursor-Motions">Cursor Motions</a></li>
+<li><a href="#h3-Area-Clears">Area Clears</a></li>
+<li><a href="#h3-Insert_delete-line-and-vertical-motions">Insert/delete line and vertical motions</a></li>
+<li><a href="#h3-Insert_Delete-Character">Insert/Delete Character</a></li>
+<li><a href="#h3-Highlighting_-Underlining_-and-Visible-Bells">Highlighting, Underlining, and Visible Bells</a></li>
+<li><a href="#h3-Keypad-and-Function-Keys">Keypad and Function Keys</a></li>
+<li><a href="#h3-Tabs-and-Initialization">Tabs and Initialization</a></li>
+<li><a href="#h3-Delays-and-Padding">Delays and Padding</a></li>
+<li><a href="#h3-Status-Lines">Status Lines</a></li>
+<li><a href="#h3-Line-Graphics">Line Graphics</a></li>
+<li><a href="#h3-Color-Handling">Color Handling</a></li>
+<li><a href="#h3-Miscellaneous">Miscellaneous</a></li>
+<li><a href="#h3-Glitches-and-Braindamage">Glitches and Braindamage</a></li>
+<li><a href="#h3-Similar-Terminals">Similar Terminals</a></li>
+<li><a href="#h3-Pitfalls-of-Long-Entries">Pitfalls of Long Entries</a></li>
+<li><a href="#h3-Binary-Compatibility">Binary Compatibility</a></li>
+</ul>
+</li>
+<li><a href="#h2-EXTENSIONS">EXTENSIONS</a></li>
+<li><a href="#h2-FILES">FILES</a></li>
+<li><a href="#h2-SEE-ALSO">SEE ALSO</a></li>
+<li><a href="#h2-AUTHORS">AUTHORS</a></li>
+</ul>
+</div>
 </BODY>
 </HTML>
 </BODY>
 </HTML>