<!--
* t
****************************************************************************
- * Copyright (c) 1998-2016,2017 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2017,2018 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: tput.1,v 1.57 2017/11/20 01:07:02 tom Exp @
+ * @Id: tput.1,v 1.62 2018/09/30 20:31:59 Sven.Joachim Exp @
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
pens to be a hardware terminal.
<STRONG>o</STRONG> The two programs write the terminal initialization strings to dif-
- ferent streams (i.e.,. the standard error for <STRONG>tset</STRONG> and the standard
+ ferent streams (i.e., the standard error for <STRONG>tset</STRONG> and the standard
output for <STRONG>tput</STRONG>).
<STRONG>Note:</STRONG> although these programs write to different streams, redirect-
program named <STRONG>init</STRONG> has a more well-established use.
+</PRE><H3><a name="h3-Terminal-Size">Terminal Size</a></H3><PRE>
+ Besides the special commands (e.g., <STRONG>clear</STRONG>), tput treats certain ter-
+ minfo capabilities specially: <STRONG>lines</STRONG> and <STRONG>columns</STRONG>. tput calls
+ <STRONG><A HREF="curs_terminfo.3x.html">setupterm(3x)</A></STRONG> to obtain the terminal size:
+
+ <STRONG>o</STRONG> first, it gets the size from the terminal database (which generally
+ is not provided for terminal emulators which do not have a fixed
+ window size)
+
+ <STRONG>o</STRONG> then it asks the operating system for the terminal's size (which
+ generally works, unless connecting via a serial line which does not
+ support <EM>NAWS</EM>: negotiations about window size).
+
+ <STRONG>o</STRONG> finally, it inspects the environment variables <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG>
+ which may override the terminal size.
+
+ If the <STRONG>-T</STRONG> option is given tput ignores the environment variables by
+ calling <STRONG>use_tioctl(TRUE)</STRONG>, relying upon the operating system (or
+ finally, the terminal database).
+
+
</PRE><H2><a name="h2-EXAMPLES">EXAMPLES</a></H2><PRE>
<STRONG>tput</STRONG> <STRONG>init</STRONG>
- Initialize the terminal according to the type of terminal in the
- environmental variable <STRONG>TERM</STRONG>. This command should be included in
+ Initialize the terminal according to the type of terminal in the
+ environmental variable <STRONG>TERM</STRONG>. This command should be included in
everyone's .profile after the environmental variable <STRONG>TERM</STRONG> has been
exported, as illustrated on the <STRONG>profile(5)</STRONG> manual page.
<STRONG>tput</STRONG> <STRONG>-T5620</STRONG> <STRONG>reset</STRONG>
- Reset an AT&T 5620 terminal, overriding the type of terminal in
+ Reset an AT&T 5620 terminal, overriding the type of terminal in
the environmental variable <STRONG>TERM</STRONG>.
<STRONG>tput</STRONG> <STRONG>cup</STRONG> <STRONG>0</STRONG> <STRONG>0</STRONG>
Send the sequence to move the cursor to row <STRONG>0</STRONG>, column <STRONG>0</STRONG> (the upper
- left corner of the screen, usually known as the "home" cursor
+ left corner of the screen, usually known as the "home" cursor
position).
<STRONG>tput</STRONG> <STRONG>clear</STRONG>
Print the number of columns for the 450 terminal.
<STRONG>bold=`tput</STRONG> <STRONG>smso`</STRONG> <STRONG>offbold=`tput</STRONG> <STRONG>rmso`</STRONG>
- Set the shell variables <STRONG>bold</STRONG>, to begin stand-out mode sequence,
+ Set the shell variables <STRONG>bold</STRONG>, to begin stand-out mode sequence,
and <STRONG>offbold</STRONG>, to end standout mode sequence, for the current termi-
nal. This might be followed by a prompt: <STRONG>echo</STRONG> <STRONG>"${bold}Please</STRONG> <STRONG>type</STRONG>
<STRONG>in</STRONG> <STRONG>your</STRONG> <STRONG>name:</STRONG> <STRONG>${offbold}\c"</STRONG>
<STRONG>tput</STRONG> <STRONG>hc</STRONG>
- Set exit code to indicate if the current terminal is a hard copy
+ Set exit code to indicate if the current terminal is a hard copy
terminal.
<STRONG>tput</STRONG> <STRONG>cup</STRONG> <STRONG>23</STRONG> <STRONG>4</STRONG>
Send the sequence to move the cursor to row 23, column 4.
<STRONG>tput</STRONG> <STRONG>cup</STRONG>
- Send the terminfo string for cursor-movement, with no parameters
+ Send the terminfo string for cursor-movement, with no parameters
substituted.
<STRONG>tput</STRONG> <STRONG>longname</STRONG>
- Print the long name from the <STRONG>terminfo</STRONG> database for the type of
+ Print the long name from the <STRONG>terminfo</STRONG> database for the type of
terminal specified in the environmental variable <STRONG>TERM</STRONG>.
<STRONG>tput</STRONG> <STRONG>-S</STRONG> <STRONG><<!</STRONG>
<STRONG>></STRONG> <STRONG>bold</STRONG>
<STRONG>></STRONG> <STRONG>!</STRONG>
- This example shows <STRONG>tput</STRONG> processing several capabilities in one
- invocation. It clears the screen, moves the cursor to position
- 10, 10 and turns on bold (extra bright) mode. The list is termi-
+ This example shows <STRONG>tput</STRONG> processing several capabilities in one
+ invocation. It clears the screen, moves the cursor to position
+ 10, 10 and turns on bold (extra bright) mode. The list is termi-
nated by an exclamation mark (<STRONG>!</STRONG>) on a line by itself.
compiled terminal description database
<STRONG>/usr/share/tabset/*</STRONG>
- tab settings for some terminals, in a format appropriate to be
- output to the terminal (escape sequences that set margins and
- tabs); for more information, see the <EM>Tabs</EM> <EM>and</EM> <EM>Initialization</EM>,
+ tab settings for some terminals, in a format appropriate to be
+ output to the terminal (escape sequences that set margins and
+ tabs); for more information, see the <EM>Tabs</EM> <EM>and</EM> <EM>Initialization</EM>,
section of <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
</PRE><H2><a name="h2-EXIT-CODES">EXIT CODES</a></H2><PRE>
If the <STRONG>-S</STRONG> option is used, <STRONG>tput</STRONG> checks for errors from each line, and if
- any errors are found, will set the exit code to 4 plus the number of
- lines with errors. If no errors are found, the exit code is <STRONG>0</STRONG>. No
- indication of which line failed can be given so exit code <STRONG>1</STRONG> will never
- appear. Exit codes <STRONG>2</STRONG>, <STRONG>3</STRONG>, and <STRONG>4</STRONG> retain their usual interpretation. If
- the <STRONG>-S</STRONG> option is not used, the exit code depends on the type of <EM>cap-</EM>
+ any errors are found, will set the exit code to 4 plus the number of
+ lines with errors. If no errors are found, the exit code is <STRONG>0</STRONG>. No
+ indication of which line failed can be given so exit code <STRONG>1</STRONG> will never
+ appear. Exit codes <STRONG>2</STRONG>, <STRONG>3</STRONG>, and <STRONG>4</STRONG> retain their usual interpretation. If
+ the <STRONG>-S</STRONG> option is not used, the exit code depends on the type of <EM>cap-</EM>
<EM>name</EM>:
<EM>boolean</EM>
a value of <STRONG>0</STRONG> is set for TRUE and <STRONG>1</STRONG> for FALSE.
<EM>string</EM> a value of <STRONG>0</STRONG> is set if the <EM>capname</EM> is defined for this termi-
- nal <EM>type</EM> (the value of <EM>capname</EM> is returned on standard out-
- put); a value of <STRONG>1</STRONG> is set if <EM>capname</EM> is not defined for this
+ nal <EM>type</EM> (the value of <EM>capname</EM> is returned on standard out-
+ put); a value of <STRONG>1</STRONG> is set if <EM>capname</EM> is not defined for this
terminal <EM>type</EM> (nothing is written to standard output).
<EM>integer</EM>
a value of <STRONG>0</STRONG> is always set, whether or not <EM>capname</EM> is defined
- for this terminal <EM>type</EM>. To determine if <EM>capname</EM> is defined
- for this terminal <EM>type</EM>, the user must test the value written
- to standard output. A value of <STRONG>-1</STRONG> means that <EM>capname</EM> is not
+ for this terminal <EM>type</EM>. To determine if <EM>capname</EM> is defined
+ for this terminal <EM>type</EM>, the user must test the value written
+ to standard output. A value of <STRONG>-1</STRONG> means that <EM>capname</EM> is not
defined for this terminal <EM>type</EM>.
- <EM>other</EM> <STRONG>reset</STRONG> or <STRONG>init</STRONG> may fail to find their respective files. In
+ <EM>other</EM> <STRONG>reset</STRONG> or <STRONG>init</STRONG> may fail to find their respective files. In
that case, the exit code is set to 4 + <STRONG>errno</STRONG>.
Any other exit code indicates an error; see the DIAGNOSTICS section.
</PRE><H2><a name="h2-DIAGNOSTICS">DIAGNOSTICS</a></H2><PRE>
- <STRONG>tput</STRONG> prints the following error messages and sets the corresponding
+ <STRONG>tput</STRONG> prints the following error messages and sets the corresponding
exit codes.
exit code error message
---------------------------------------------------------------------
- <STRONG>0</STRONG> (<EM>capname</EM> is a numeric variable that is not specified in
- the <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> database for this terminal type, e.g.
+ <STRONG>0</STRONG> (<EM>capname</EM> is a numeric variable that is not specified in
+ the <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> database for this terminal type, e.g.
<STRONG>tput</STRONG> <STRONG>-T450</STRONG> <STRONG>lines</STRONG> and <STRONG>tput</STRONG> <STRONG>-T2621</STRONG> <STRONG>xmc</STRONG>)
<STRONG>1</STRONG> no error message is printed, see the <STRONG>EXIT</STRONG> <STRONG>CODES</STRONG> section.
<STRONG>2</STRONG> usage error
</PRE><H2><a name="h2-HISTORY">HISTORY</a></H2><PRE>
- The <STRONG>tput</STRONG> command was begun by Bill Joy in 1980. The initial version
+ The <STRONG>tput</STRONG> command was begun by Bill Joy in 1980. The initial version
only cleared the screen.
- AT&T System V provided a different <STRONG>tput</STRONG> command, whose <STRONG>init</STRONG> and <STRONG>reset</STRONG>
- subcommands (more than half the program) were incorporated from the
+ AT&T System V provided a different <STRONG>tput</STRONG> command, whose <STRONG>init</STRONG> and <STRONG>reset</STRONG>
+ subcommands (more than half the program) were incorporated from the
<STRONG>reset</STRONG> feature of BSD <STRONG>tset</STRONG> written by Eric Allman.
Keith Bostic replaced the BSD <STRONG>tput</STRONG> command in 1989 with a new implemen-
tation based on the AT&T System V program <STRONG>tput</STRONG>. Like the AT&T program,
- Bostic's version accepted some parameters named for <EM>terminfo</EM> <EM>capabili-</EM>
- <EM>ties</EM> (<STRONG>clear</STRONG>, <STRONG>init</STRONG>, <STRONG>longname</STRONG> and <STRONG>reset</STRONG>). However (because he had only
- termcap available), it accepted <EM>termcap</EM> <EM>names</EM> for other capabilities.
- Also, Bostic's BSD <STRONG>tput</STRONG> did not modify the terminal I/O modes as the
+ Bostic's version accepted some parameters named for <EM>terminfo</EM> <EM>capabili-</EM>
+ <EM>ties</EM> (<STRONG>clear</STRONG>, <STRONG>init</STRONG>, <STRONG>longname</STRONG> and <STRONG>reset</STRONG>). However (because he had only
+ termcap available), it accepted <EM>termcap</EM> <EM>names</EM> for other capabilities.
+ Also, Bostic's BSD <STRONG>tput</STRONG> did not modify the terminal I/O modes as the
earlier BSD <STRONG>tset</STRONG> had done.
At the same time, Bostic added a shell script named "clear", which used
Both of these appeared in 4.4BSD, becoming the "modern" BSD implementa-
tion of <STRONG>tput</STRONG>.
- This implementation of <STRONG>tput</STRONG> began from a different source than AT&T or
- BSD: Ross Ridge's <EM>mytinfo</EM> package, published on <EM>comp.sources.unix</EM> in
+ This implementation of <STRONG>tput</STRONG> began from a different source than AT&T or
+ BSD: Ross Ridge's <EM>mytinfo</EM> package, published on <EM>comp.sources.unix</EM> in
December 1992. Ridge's program made more sophisticated use of the ter-
- minal capabilities than the BSD program. Eric Raymond used the <STRONG>tput</STRONG>
- program (and other parts of <EM>mytinfo</EM>) in ncurses in June 1995. Using
- the portions dealing with terminal capabilities almost without change,
- Raymond made improvements to the way the command-line parameters were
+ minal capabilities than the BSD program. Eric Raymond used that <STRONG>tput</STRONG>
+ program (and other parts of <EM>mytinfo</EM>) in ncurses in June 1995. Using
+ the portions dealing with terminal capabilities almost without change,
+ Raymond made improvements to the way the command-line parameters were
handled.
</PRE><H2><a name="h2-PORTABILITY">PORTABILITY</a></H2><PRE>
- This implementation of <STRONG>tput</STRONG> differs from AT&T <STRONG>tput</STRONG> in two important
+ This implementation of <STRONG>tput</STRONG> differs from AT&T <STRONG>tput</STRONG> in two important
areas:
- <STRONG>o</STRONG> <STRONG>tput</STRONG> <EM>capname</EM> writes to the standard output. That need not be a
+ <STRONG>o</STRONG> <STRONG>tput</STRONG> <EM>capname</EM> writes to the standard output. That need not be a
regular terminal. However, the subcommands which manipulate termi-
nal modes may not use the standard output.
- The AT&T implementation's <STRONG>init</STRONG> and <STRONG>reset</STRONG> commands use the BSD
- (4.1c) <STRONG>tset</STRONG> source, which manipulates terminal modes. It succes-
+ The AT&T implementation's <STRONG>init</STRONG> and <STRONG>reset</STRONG> commands use the BSD
+ (4.1c) <STRONG>tset</STRONG> source, which manipulates terminal modes. It succes-
sively tries standard output, standard error, standard input before
falling back to "/dev/tty" and finally just assumes a 1200Bd termi-
nal. When updating terminal modes, it ignores errors.
- Until changes made after ncurses 6.0, <STRONG>tput</STRONG> did not modify terminal
+ Until changes made after ncurses 6.0, <STRONG>tput</STRONG> did not modify terminal
modes. <STRONG>tput</STRONG> now uses a similar scheme, using functions shared with
- <STRONG>tset</STRONG> (and ultimately based on the 4.4BSD <STRONG>tset</STRONG>). If it is not able
+ <STRONG>tset</STRONG> (and ultimately based on the 4.4BSD <STRONG>tset</STRONG>). If it is not able
to open a terminal, e.g., when running in <STRONG>cron</STRONG>, <STRONG>tput</STRONG> will return an
error.
of the characters are numeric, or not.
Most implementations which provide support for <EM>capname</EM> operands use
- the <EM>tparm</EM> function to expand parameters in it. That function
- expects a mixture of numeric and string parameters, requiring <STRONG>tput</STRONG>
+ the <EM>tparm</EM> function to expand parameters in it. That function
+ expects a mixture of numeric and string parameters, requiring <STRONG>tput</STRONG>
to know which type to use.
- This implementation uses a table to determine the parameter types
+ This implementation uses a table to determine the parameter types
for the standard <EM>capname</EM> operands, and an internal library function
to analyze nonstandard <EM>capname</EM> operands.
- This implementation (unlike others) can accept both <EM>termcap</EM> and <EM>ter-</EM>
+ This implementation (unlike others) can accept both <EM>termcap</EM> and <EM>ter-</EM>
<EM>minfo</EM> names for the <EM>capname</EM> feature, if <EM>termcap</EM> support is compiled in.
However, the predefined <EM>termcap</EM> and <EM>terminfo</EM> names have two ambiguities
in this case (and the <EM>terminfo</EM> name is assumed):
- <STRONG>o</STRONG> The <EM>termcap</EM> name <STRONG>dl</STRONG> corresponds to the <EM>terminfo</EM> name <STRONG>dl1</STRONG> (delete
+ <STRONG>o</STRONG> The <EM>termcap</EM> name <STRONG>dl</STRONG> corresponds to the <EM>terminfo</EM> name <STRONG>dl1</STRONG> (delete
one line).
- The <EM>terminfo</EM> name <STRONG>dl</STRONG> corresponds to the <EM>termcap</EM> name <STRONG>DL</STRONG> (delete a
+ The <EM>terminfo</EM> name <STRONG>dl</STRONG> corresponds to the <EM>termcap</EM> name <STRONG>DL</STRONG> (delete a
given number of lines).
- <STRONG>o</STRONG> The <EM>termcap</EM> name <STRONG>ed</STRONG> corresponds to the <EM>terminfo</EM> name <STRONG>rmdc</STRONG> (end
+ <STRONG>o</STRONG> The <EM>termcap</EM> name <STRONG>ed</STRONG> corresponds to the <EM>terminfo</EM> name <STRONG>rmdc</STRONG> (end
delete mode).
- The <EM>terminfo</EM> name <STRONG>ed</STRONG> corresponds to the <EM>termcap</EM> name <STRONG>cd</STRONG> (clear to
+ The <EM>terminfo</EM> name <STRONG>ed</STRONG> corresponds to the <EM>termcap</EM> name <STRONG>cd</STRONG> (clear to
end of screen).
- The <STRONG>longname</STRONG> and <STRONG>-S</STRONG> options, and the parameter-substitution features
- used in the <STRONG>cup</STRONG> example, were not supported in BSD curses before
+ The <STRONG>longname</STRONG> and <STRONG>-S</STRONG> options, and the parameter-substitution features
+ used in the <STRONG>cup</STRONG> example, were not supported in BSD curses before
4.3reno (1989) or in AT&T/USL curses before SVr4 (1988).
- IEEE Std 1003.1/The Open Group Base Specifications Issue 7
- (POSIX.1-2008) documents only the operands for <STRONG>clear</STRONG>, <STRONG>init</STRONG> and <STRONG>reset</STRONG>.
+ IEEE Std 1003.1/The Open Group Base Specifications Issue 7
+ (POSIX.1-2008) documents only the operands for <STRONG>clear</STRONG>, <STRONG>init</STRONG> and <STRONG>reset</STRONG>.
There are a few interesting observations to make regarding that:
- <STRONG>o</STRONG> In this implementation, <STRONG>clear</STRONG> is part of the <EM>capname</EM> support. The
- others (<STRONG>init</STRONG> and <STRONG>longname</STRONG>) do not correspond to terminal capabili-
+ <STRONG>o</STRONG> In this implementation, <STRONG>clear</STRONG> is part of the <EM>capname</EM> support. The
+ others (<STRONG>init</STRONG> and <STRONG>longname</STRONG>) do not correspond to terminal capabili-
ties.
<STRONG>o</STRONG> Other implementations of <STRONG>tput</STRONG> on SVr4-based systems such as
- Solaris, IRIX64 and HPUX as well as others such as AIX and Tru64
+ Solaris, IRIX64 and HPUX as well as others such as AIX and Tru64
provide support for <EM>capname</EM> operands.
<STRONG>o</STRONG> A few platforms such as FreeBSD recognize termcap names rather than
terminfo capability names in their respective <STRONG>tput</STRONG> commands. Since
- 2010, NetBSD's <STRONG>tput</STRONG> uses terminfo names. Before that, it (like
+ 2010, NetBSD's <STRONG>tput</STRONG> uses terminfo names. Before that, it (like
FreeBSD) recognized termcap names.
Because (apparently) <EM>all</EM> of the certified Unix systems support the full
- set of capability names, the reasoning for documenting only a few may
+ set of capability names, the reasoning for documenting only a few may
not be apparent.
- <STRONG>o</STRONG> X/Open Curses Issue 7 documents <STRONG>tput</STRONG> differently, with <EM>capname</EM> and
+ <STRONG>o</STRONG> X/Open Curses Issue 7 documents <STRONG>tput</STRONG> differently, with <EM>capname</EM> and
the other features used in this implementation.
- <STRONG>o</STRONG> That is, there are two standards for <STRONG>tput</STRONG>: POSIX (a subset) and
- X/Open Curses (the full implementation). POSIX documents a subset
+ <STRONG>o</STRONG> That is, there are two standards for <STRONG>tput</STRONG>: POSIX (a subset) and
+ X/Open Curses (the full implementation). POSIX documents a subset
to avoid the complication of including X/Open Curses and the termi-
nal capabilities database.
- <STRONG>o</STRONG> While it is certainly possible to write a <STRONG>tput</STRONG> program without
- using curses, none of the systems which have a curses implementa-
+ <STRONG>o</STRONG> While it is certainly possible to write a <STRONG>tput</STRONG> program without
+ using curses, none of the systems which have a curses implementa-
tion provide a <STRONG>tput</STRONG> utility which does not provide the <EM>capname</EM> fea-
ture.
+ X/Open Curses Issue 7 (2009) is the first version to document utili-
+ ties. However that part of X/Open Curses does not follow existing
+ practice (i.e., Unix features documented in SVID 3):
+
+ <STRONG>o</STRONG> It assigns exit code 4 to "invalid operand", which may be the same
+ as <EM>unknown</EM> <EM>capability</EM>. For instance, the source code for Solaris'
+ xcurses uses the term "invalid" in this case.
+
+ <STRONG>o</STRONG> It assigns exit code 255 to a numeric variable that is not speci-
+ fied in the terminfo database. That likely is a documentation
+ error, confusing the <STRONG>-1</STRONG> written to the standard output for an
+ absent or cancelled numeric value versus an (unsigned) exit code.
+
+ The various Unix systems (AIX, HPUX, Solaris) use the same exit-codes
+ as ncurses.
+
+ NetBSD curses documents different exit codes which do not correspond to
+ either ncurses or X/Open.
+
</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
<STRONG><A HREF="clear.1.html">clear(1)</A></STRONG>, <STRONG>stty(1)</STRONG>, <STRONG><A HREF="tabs.1.html">tabs(1)</A></STRONG>, <STRONG><A HREF="tset.1.html">tset(1)</A></STRONG>, <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>, <STRONG><A HREF="curs_termcap.3x.html">curs_termcap(3x)</A></STRONG>.
- This describes <STRONG>ncurses</STRONG> version 6.1 (patch 20180127).
+ This describes <STRONG>ncurses</STRONG> version 6.1 (patch 20190121).
<li><a href="#h3-Options">Options</a></li>
<li><a href="#h3-Commands">Commands</a></li>
<li><a href="#h3-Aliases">Aliases</a></li>
+<li><a href="#h3-Terminal-Size">Terminal Size</a></li>
</ul>
</li>
<li><a href="#h2-EXAMPLES">EXAMPLES</a></li>
projects / ncurses.git / blobdiff