<!--
****************************************************************************
- * Copyright (c) 1998-2011,2013 Free Software Foundation, Inc. *
+ * Copyright (c) 1998-2013,2016 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
- * @Id: tset.1,v 1.29 2013/12/21 22:15:53 tom Exp @
+ * @Id: tset.1,v 1.43 2016/08/06 23:16:39 tom Exp @
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01//EN">
<HTML>
-</PRE>
-<H2><a name="h2-NAME">NAME</a></H2><PRE>
+</PRE><H2><a name="h2-NAME">NAME</a></H2><PRE>
<STRONG>tset</STRONG>, <STRONG>reset</STRONG> - terminal initialization
-</PRE>
-<H2><a name="h2-SYNOPSIS">SYNOPSIS</a></H2><PRE>
+</PRE><H2><a name="h2-SYNOPSIS">SYNOPSIS</a></H2><PRE>
<STRONG>tset</STRONG> [<STRONG>-IQVcqrsw</STRONG>] [<STRONG>-</STRONG>] [<STRONG>-e</STRONG> <EM>ch</EM>] [<STRONG>-i</STRONG> <EM>ch</EM>] [<STRONG>-k</STRONG> <EM>ch</EM>] [<STRONG>-m</STRONG> <EM>mapping</EM>]
[<EM>terminal</EM>]
<STRONG>reset</STRONG> [<STRONG>-IQVcqrsw</STRONG>] [<STRONG>-</STRONG>] [<STRONG>-e</STRONG> <EM>ch</EM>] [<STRONG>-i</STRONG> <EM>ch</EM>] [<STRONG>-k</STRONG> <EM>ch</EM>] [<STRONG>-m</STRONG> <EM>mapping</EM>]
[<EM>terminal</EM>]
-</PRE>
-<H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
- <STRONG>Tset</STRONG> initializes terminals. <STRONG>Tset</STRONG> first determines the
- type of terminal that you are using. This determination
- is done as follows, using the first terminal type found.
+</PRE><H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
+
+</PRE><H3><a name="h3-tset---initialization">tset - initialization</a></H3><PRE>
+ This program initializes terminals.
+
+ First, <STRONG>tset</STRONG> retrieves the current terminal mode settings
+ for your terminal. It does this by successively testing
+
+ <STRONG>o</STRONG> the standard error,
+
+ <STRONG>o</STRONG> standard output,
+
+ <STRONG>o</STRONG> standard input and
+
+ <STRONG>o</STRONG> ultimately "/dev/tty"
+
+ to obtain terminal settings. Having retrieved these set-
+ tings, <STRONG>tset</STRONG> remembers which file descriptor to use when
+ updating settings.
+
+ Next, <STRONG>tset</STRONG> determines the type of terminal that you are
+ using. This determination is done as follows, using the
+ first terminal type found.
1. The <STRONG>terminal</STRONG> argument specified on the command line.
2. The value of the <STRONG>TERM</STRONG> environmental variable.
- 3. (BSD systems only.) The terminal type associated with
- the standard error output device in the <EM>/etc/ttys</EM> file.
- (On System-V-like UNIXes and systems using that conven-
+ 3. (BSD systems only.) The terminal type associated with
+ the standard error output device in the <EM>/etc/ttys</EM> file.
+ (On System-V-like UNIXes and systems using that conven-
tion, <EM>getty</EM> does this job by setting <STRONG>TERM</STRONG> according to the
type passed to it by <EM>/etc/inittab</EM>.)
4. The default terminal type, "unknown".
- If the terminal type was not specified on the command-
- line, the <STRONG>-m</STRONG> option mappings are then applied (see the
+ If the terminal type was not specified on the command-
+ line, the <STRONG>-m</STRONG> option mappings are then applied (see the
section <STRONG>TERMINAL</STRONG> <STRONG>TYPE</STRONG> <STRONG>MAPPING</STRONG> for more information).
- Then, if the terminal type begins with a question mark
+ Then, if the terminal type begins with a question mark
("?"), the user is prompted for confirmation of the termi-
- nal type. An empty response confirms the type, or,
- another type can be entered to specify a new type. Once
- the terminal type has been determined, the terminfo entry
- for the terminal is retrieved. If no terminfo entry is
- found for the type, the user is prompted for another ter-
+ nal type. An empty response confirms the type, or,
+ another type can be entered to specify a new type. Once
+ the terminal type has been determined, the terminfo entry
+ for the terminal is retrieved. If no terminfo entry is
+ found for the type, the user is prompted for another ter-
minal type.
- Once the terminfo entry is retrieved, the window size,
- backspace, interrupt and line kill characters (among many
+ Once the terminfo entry is retrieved, the window size,
+ backspace, interrupt and line kill characters (among many
other things) are set and the terminal and tab initializa-
- tion strings are sent to the standard error output.
- Finally, if the erase, interrupt and line kill characters
- have changed, or are not set to their default values,
- their values are displayed to the standard error output.
- Use the <STRONG>-c</STRONG> or <STRONG>-w</STRONG> option to select only the window sizing
- versus the other initialization. If neither option is
- given, both are assumed.
+ tion strings are sent to the standard error output.
+ Finally, if the erase, interrupt and line kill characters
+ have changed, or are not set to their default values,
+ their values are displayed to the standard error output.
+
+</PRE><H3><a name="h3-reset---reinitialization">reset - reinitialization</a></H3><PRE>
When invoked as <STRONG>reset</STRONG>, <STRONG>tset</STRONG> sets cooked and echo modes,
turns off cbreak and raw modes, turns on newline transla-
tion and resets any unset special characters to their
leaving a terminal in an abnormal state. Note, you may
have to type
- <STRONG><LF>reset<LF></STRONG>
+ <EM><LF></EM><STRONG>reset</STRONG><EM><LF></EM>
(the line-feed character is normally control-J) to get the
terminal to work, as carriage-return may no longer work in
the abnormal state. Also, the terminal will often not
echo the command.
+
+</PRE><H2><a name="h2-OPTIONS">OPTIONS</a></H2><PRE>
The options are as follows:
<STRONG>-c</STRONG> Set control characters and modes.
<STRONG>-q</STRONG> The terminal type is displayed to the standard out-
put, and the terminal is not initialized in any way.
- The option `-' by itself is equivalent but archaic.
+ The option "-" by itself is equivalent but archaic.
<STRONG>-r</STRONG> Print the terminal type to the standard error output.
<STRONG>setupterm</STRONG> is not able to detect the window size.
The arguments for the <STRONG>-e</STRONG>, <STRONG>-i</STRONG>, and <STRONG>-k</STRONG> options may either be
- entered as actual characters or by using the `hat' nota-
+ entered as actual characters or by using the "hat" nota-
tion, i.e., control-h may be specified as "^H" or "^h".
+ If neither <STRONG>-c</STRONG> or <STRONG>-w</STRONG> is given, both options are assumed.
-</PRE>
-<H2><a name="h2-SETTING-THE-ENVIRONMENT">SETTING THE ENVIRONMENT</a></H2><PRE>
+
+</PRE><H2><a name="h2-SETTING-THE-ENVIRONMENT">SETTING THE ENVIRONMENT</a></H2><PRE>
It is often desirable to enter the terminal type and
information about the terminal's capabilities into the
shell's environment. This is done using the <STRONG>-s</STRONG> option.
eval `tset -s options ... `
-</PRE>
-<H2><a name="h2-TERMINAL-TYPE-MAPPING">TERMINAL TYPE MAPPING</a></H2><PRE>
+</PRE><H2><a name="h2-TERMINAL-TYPE-MAPPING">TERMINAL TYPE MAPPING</a></H2><PRE>
When the terminal is not hardwired into the system (or the
current system information is incorrect) the terminal type
derived from the <EM>/etc/ttys</EM> file or the <STRONG>TERM</STRONG> environmental
often desirable to provide information about the type of
terminal used on such ports.
- The purpose of the <STRONG>-m</STRONG> option is to map from some set of
- conditions to a terminal type, that is, to tell <STRONG>tset</STRONG> "If
- I'm on this port at a particular speed, guess that I'm on
- that kind of terminal".
+ The <STRONG>-m</STRONG> options maps from some set of conditions to a ter-
+ minal type, that is, to tell <STRONG>tset</STRONG> "If I'm on this port at
+ a particular speed, guess that I'm on that kind of termi-
+ nal".
The argument to the <STRONG>-m</STRONG> option consists of an optional port
type, an optional operator, an optional baud rate specifi-
marks ("!").
-</PRE>
-<H2><a name="h2-HISTORY">HISTORY</a></H2><PRE>
- The <STRONG>tset</STRONG> command appeared in BSD 3.0. The <STRONG>ncurses</STRONG> imple-
- mentation was lightly adapted from the 4.4BSD sources for
- a terminfo environment by Eric S. Raymond <esr@snark.thyr-
- sus.com>.
+</PRE><H2><a name="h2-HISTORY">HISTORY</a></H2><PRE>
+ A <STRONG>reset</STRONG> command appeared in 2BSD (1979), written by Kurt
+ Shoens.
+ A separate <STRONG>tset</STRONG> command was provided in 2BSD by Eric All-
+ man. While the oldest published source (from 1979) pro-
+ vides both programs, Allman's comments in the 2BSD source
+ code indicate that he began work in October 1977, continu-
+ ing development over the next few years.
-</PRE>
-<H2><a name="h2-COMPATIBILITY">COMPATIBILITY</a></H2><PRE>
- The <STRONG>tset</STRONG> utility has been provided for backward-compati-
- bility with BSD environments (under most modern UNIXes,
- <STRONG>/etc/inittab</STRONG> and <STRONG>getty(1)</STRONG> can set <STRONG>TERM</STRONG> appropriately for
- each dial-up line; this obviates what was <STRONG>tset</STRONG>'s most
- important use). This implementation behaves like 4.4BSD
- tset, with a few exceptions specified here.
-
- The <STRONG>-S</STRONG> option of BSD tset no longer works; it prints an
- error message to stderr and dies. The <STRONG>-s</STRONG> option only sets
- <STRONG>TERM</STRONG>, not <STRONG>TERMCAP</STRONG>. Both of these changes are because the
- <STRONG>TERMCAP</STRONG> variable is no longer supported under terminfo-
- based <STRONG>ncurses</STRONG>, which makes <STRONG>tset</STRONG> <STRONG>-S</STRONG> useless (we made it die
- noisily rather than silently induce lossage).
+ In 1980, Eric Allman modified <STRONG>tset</STRONG> to provide a "reset"
+ feature when the program was invoked as <STRONG>reset</STRONG>.
+
+ The <STRONG>ncurses</STRONG> implementation was lightly adapted from the
+ 4.4BSD sources for a terminfo environment by Eric S. Ray-
+ mond <esr@snark.thyrsus.com>.
+
+
+</PRE><H2><a name="h2-COMPATIBILITY">COMPATIBILITY</a></H2><PRE>
+ Neither IEEE Std 1003.1/The Open Group Base Specifications
+ Issue 7 (POSIX.1-2008) nor X/Open Curses Issue 7 documents
+ <STRONG>tset</STRONG> or <STRONG>reset</STRONG>.
+
+ The AT&T <STRONG>tput</STRONG> utility (AIX, HPUX, Solaris) incorporated
+ the terminal-mode manipulation as well as termcap-based
+ features such as resetting tabstops from <STRONG>tset</STRONG> in BSD
+ (4.1c), presumably with the intention of making <STRONG>tset</STRONG> obso-
+ lete. However, each of those systems still provides <STRONG>tset</STRONG>.
+ In fact, the commonly-used <STRONG>reset</STRONG> utility is always an
+ alias for <STRONG>tset</STRONG>.
+
+ The <STRONG>tset</STRONG> utility provides for backward-compatibility with
+ BSD environments (under most modern UNIXes, <STRONG>/etc/inittab</STRONG>
+ and <STRONG>getty(1)</STRONG> can set <STRONG>TERM</STRONG> appropriately for each dial-up
+ line; this obviates what was <STRONG>tset</STRONG>'s most important use).
+ This implementation behaves like 4.4BSD <STRONG>tset</STRONG>, with a few
+ exceptions specified here.
+
+ A few options are different because the <STRONG>TERMCAP</STRONG> variable
+ is no longer supported under terminfo-based <STRONG>ncurses</STRONG>:
+
+ <STRONG>o</STRONG> The <STRONG>-S</STRONG> option of BSD <STRONG>tset</STRONG> no longer works; it prints
+ an error message to the standard error and dies.
+
+ <STRONG>o</STRONG> The <STRONG>-s</STRONG> option only sets <STRONG>TERM</STRONG>, not <STRONG>TERMCAP</STRONG>.
There was an undocumented 4.4BSD feature that invoking
- tset via a link named `TSET` (or via any other name begin-
+ <STRONG>tset</STRONG> via a link named "TSET" (or via any other name begin-
ning with an upper-case letter) set the terminal to use
upper-case only. This feature has been omitted.
<STRONG>-d</STRONG>, and <STRONG>-p</STRONG> options are similarly not documented or useful,
but were retained as they appear to be in widespread use.
It is strongly recommended that any usage of these three
- options be changed to use the <STRONG>-m</STRONG> option instead. The <STRONG>-n</STRONG>
- option remains, but has no effect. The <STRONG>-adnp</STRONG> options are
- therefore omitted from the usage summary above.
-
- It is still permissible to specify the <STRONG>-e</STRONG>, <STRONG>-i</STRONG>, and <STRONG>-k</STRONG>
- options without arguments, although it is strongly recom-
- mended that such usage be fixed to explicitly specify the
+ options be changed to use the <STRONG>-m</STRONG> option instead. The <STRONG>-a</STRONG>,
+ <STRONG>-d</STRONG>, and <STRONG>-p</STRONG> options are therefore omitted from the usage
+ summary above.
+
+ Very old systems, e.g., 3BSD, used a different terminal
+ driver which was replaced in 4BSD in the early 1980s. To
+ accommodate these older systems, the 4BSD <STRONG>tset</STRONG> provided a
+ <STRONG>-n</STRONG> option to specify that the new terminal driver should
+ be used. This implementation does not provide that
+ choice.
+
+ It is still permissible to specify the <STRONG>-e</STRONG>, <STRONG>-i</STRONG>, and <STRONG>-k</STRONG>
+ options without arguments, although it is strongly recom-
+ mended that such usage be fixed to explicitly specify the
character.
- As of 4.4BSD, executing <STRONG>tset</STRONG> as <STRONG>reset</STRONG> no longer implies
+ As of 4.4BSD, executing <STRONG>tset</STRONG> as <STRONG>reset</STRONG> no longer implies
the <STRONG>-Q</STRONG> option. Also, the interaction between the - option
and the <EM>terminal</EM> argument in some historic implementations
of <STRONG>tset</STRONG> has been removed.
-
-</PRE>
-<H2><a name="h2-ENVIRONMENT">ENVIRONMENT</a></H2><PRE>
+ The <STRONG>-c</STRONG> and <STRONG>-w</STRONG> options are not found in earlier implementa-
+ tions. However, a different window size-change feature
+ was provided in 4.4BSD.
+
+ <STRONG>o</STRONG> In 4.4BSD, <STRONG>tset</STRONG> uses the window size from the termcap
+ description to set the window size if <STRONG>tset</STRONG> is not able
+ to obtain the window size from the operating system.
+
+ <STRONG>o</STRONG> In ncurses, <STRONG>tset</STRONG> obtains the window size using
+ <STRONG>setupterm</STRONG>, which may be from the operating system, the
+ <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> environment variables or the termi-
+ nal description.
+
+ Obtaining the window size from the terminal description is
+ common to both implementations, but considered obsoles-
+ cent. Its only practical use is for hardware terminals.
+ Generally speaking, a window size would be unset only if
+ there were some problem obtaining the value from the oper-
+ ating system (and <STRONG>setupterm</STRONG> would still fail). For that
+ reason, the <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> environment variables may be
+ useful for working around window-size problems. Those
+ have the drawback that if the window is resized, those
+ variables must be recomputed and reassigned. To do this
+ more easily, use the <STRONG><A HREF="resize.1.html">resize(1)</A></STRONG> program.
+
+
+</PRE><H2><a name="h2-ENVIRONMENT">ENVIRONMENT</a></H2><PRE>
The <STRONG>tset</STRONG> command uses these environment variables:
SHELL
TERMCAP
may denote the location of a termcap database. If it
- is not an absolute pathname, e.g., begins with a `/',
+ is not an absolute pathname, e.g., begins with a "/",
<STRONG>tset</STRONG> removes the variable from the environment before
looking for the terminal description.
-</PRE>
-<H2><a name="h2-FILES">FILES</a></H2><PRE>
+</PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
/etc/ttys
system port name to terminal type mapping database
(BSD versions only).
terminal capability database
-</PRE>
-<H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
+</PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
<STRONG>csh(1)</STRONG>, <STRONG>sh(1)</STRONG>, <STRONG>stty(1)</STRONG>, <STRONG><A HREF="curs_terminfo.3x.html">curs_terminfo(3x)</A></STRONG>, <STRONG>tty(4)</STRONG>,
<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>, <STRONG>ttys(5)</STRONG>, <STRONG>environ(7)</STRONG>
- This describes <STRONG>ncurses</STRONG> version 6.0 (patch 20150718).
+ This describes <STRONG>ncurses</STRONG> version 6.0 (patch 20161015).
<ul>
<li><a href="#h2-NAME">NAME</a></li>
<li><a href="#h2-SYNOPSIS">SYNOPSIS</a></li>
-<li><a href="#h2-DESCRIPTION">DESCRIPTION</a></li>
+<li><a href="#h2-DESCRIPTION">DESCRIPTION</a>
+<ul>
+<li><a href="#h3-tset---initialization">tset - initialization</a></li>
+<li><a href="#h3-reset---reinitialization">reset - reinitialization</a></li>
+</ul>
+</li>
+<li><a href="#h2-OPTIONS">OPTIONS</a></li>
<li><a href="#h2-SETTING-THE-ENVIRONMENT">SETTING THE ENVIRONMENT</a></li>
<li><a href="#h2-TERMINAL-TYPE-MAPPING">TERMINAL TYPE MAPPING</a></li>
<li><a href="#h2-HISTORY">HISTORY</a></li>