-.\" $Id: terminfo.tail,v 1.75 2016/12/24 22:54:11 tom Exp $
+.\" $Id: terminfo.tail,v 1.90 2019/01/20 20:21:46 tom Exp $
.\" Beginning of terminfo.tail file
.\" This file is part of ncurses.
.\" See "terminfo.head" for copyright.
which it does not recognize,
it infers its type (boolean, number or string) from the syntax
and makes an extended table entry for that capability.
-The \fBuse_extended_names\fP function makes this information
+The \fBuse_extended_names\fP(3X) function makes this information
conditionally available to applications.
The ncurses library provides the data leaving most of the behavior
to applications:
ending at the next following \*(``,\*(''.
.PP
A number of escape sequences are provided in the string valued capabilities
-for easy encoding of characters there.
+for easy encoding of characters there:
+.bP
Both \fB\eE\fR and \fB\ee\fR
map to an \s-1ESCAPE\s0 character,
-\fB^x\fR maps to a control-x for any appropriate x, and the sequences
-\fB\en \el \er \et \eb \ef \es\fR give
-a newline, line-feed, return, tab, backspace, form-feed, and space.
+.bP
+\fB^x\fR maps to a control-x for any appropriate \fIx\fP, and
+.bP
+the sequences
+.RS 6
+.PP
+\fB\en\fP, \fB\el\fP, \fB\er\fP, \fB\et\fP, \fB\eb\fP, \fB\ef\fP, and \fB\es\fR
+.RE
+.IP
+produce
+.RS 6
+.PP
+\fInewline\fP, \fIline-feed\fP, \fIreturn\fP, \fItab\fP, \fIbackspace\fP, \fIform-feed\fP, and \fIspace\fP,
+.RE
+.IP
+respectively.
+.PP
+X/Open Curses does not say what \*(``appropriate \fIx\fP\*('' might be.
+In practice, that is a printable ASCII graphic character.
+The special case \*(``^?\*('' is interpreted as DEL (127).
+In all other cases, the character value is AND'd with 0x1f,
+mapping to ASCII control codes in the range 0 through 31.
+.PP
Other escapes include
.bP
\fB\e^\fR for \fB^\fR,
.IP
\fB\e0\fR will produce \e200, which does not terminate a string but behaves
as a null character on most terminals, providing CS7 is specified.
-See stty(1).
+See \fBstty\fP(1).
.IP
The reason for this quirk is to maintain binary compatibility of the
compiled terminfo files with other implementations,
.PP
A delay in milliseconds may appear anywhere in a string capability, enclosed in
$<..> brackets, as in \fBel\fP=\eEK$<5>,
-and padding characters are supplied by \fBtputs\fP
+and padding characters are supplied by \fBtputs\fP(3X)
to provide this delay.
.bP
The delay must be a number with at most one decimal
.B nel
out of one or both of them.
.PP
-These capabilities suffice to describe hard-copy and \*(lqglass-tty\*(rq terminals.
+These capabilities suffice to describe hard-copy and \*(``glass-tty\*('' terminals.
Thus the model 33 teletype is described as
.PP
.DT
outputs \*(``%\*(''
.TP
\fB%\fP\fI[[\fP:\fI]flags][width[.precision]][\fP\fBdoxXs\fP\fI]\fP
-as in \fBprintf\fP, flags are \fI[\-+#]\fP and \fIspace\fP.
+as in \fBprintf\fP(3), flags are \fI[\-+#]\fP and \fIspace\fP.
Use a \*(``:\*('' to allow the next character to be a \*(``\-\*('' flag,
-avoiding interpreting "%\-" as an operator.
+avoiding interpreting \*(``%\-\*('' as an operator.
.TP
\f(CW%c\fP
print \fIpop()\fP like %c in \fBprintf\fP
.IP
The terms "static" and "dynamic" are misleading.
Historically, these are simply two different sets of variables,
-whose values are not reset between calls to \fBtparm\fP.
+whose values are not reset between calls to \fBtparm\fP(3X).
However, that fact is not documented in other implementations.
Relying on it will adversely impact portability to other implementations.
.TP
Note that the order
of the rows and columns is inverted here, and that the row and column
are printed as two digits.
-Thus its \fBcup\fR capability is \*(lqcup=6\eE&%p2%2dc%p1%2dY\*(rq.
+Thus its \fBcup\fR capability is \*(``cup=6\eE&%p2%2dc%p1%2dY\*(''.
.PP
The Microterm \s-1ACT-IV\s0 needs the current row and column sent
preceded by a \fB^T\fR, with the row and column simply encoded in binary,
-\*(lqcup=^T%p1%c%p2%c\*(rq.
-Terminals which use \*(lq%c\*(rq need to be able to
+\*(``cup=^T%p1%c%p2%c\*(''.
+Terminals which use \*(``%c\*('' need to be able to
backspace the cursor (\fBcub1\fR),
and to move the cursor up one line on the screen (\fBcuu1\fR).
This is necessary because it is not always safe to transmit \fB\en\fR
This turns out to be essential for the Ann Arbor 4080.)
.PP
A final example is the \s-1LSI ADM\s0-3a, which uses row and column
-offset by a blank character, thus \*(lqcup=\eE=%p1%' '%+%c%p2%' '%+%c\*(rq.
+offset by a blank character, thus \*(``cup=\eE=%p1%' '%+%c%p2%' '%+%c\*(''.
After sending \*(``\eE=\*('', this pushes the first parameter, pushes the
ASCII value for a space (32), adds them (pushing the sum on the stack
in place of the two previous values) and outputs that value as a character.
.BR cub ,
.BR cuf ,
and
-.BR cuu
+.B cuu
with a single parameter indicating how many spaces to move.
These are primarily useful if the terminal does not have
.BR cup ,
You can determine the
kind of terminal you have by clearing the screen and then typing
text separated by cursor motions.
-Type \*(lqabc\ \ \ \ def\*(rq using local
-cursor motions (not spaces) between the \*(lqabc\*(rq and the \*(lqdef\*(rq.
-Then position the cursor before the \*(lqabc\*(rq and put the terminal in insert
+Type \*(``abc\ \ \ \ def\*('' using local
+cursor motions (not spaces) between the \*(``abc\*('' and the \*(``def\*(''.
+Then position the cursor before the \*(``abc\*('' and put the terminal in insert
mode.
If typing characters causes the rest of the line to shift
rigidly and characters to fall off the end, then your terminal does
not distinguish between blanks and untyped positions.
-If the \*(lqabc\*(rq
-shifts over to the \*(lqdef\*(rq which then move together around the end of the
+If the \*(``abc\*(''
+shifts over to the \*(``def\*('' which then move together around the end of the
current line and onto the next as you insert, you have the second type of
terminal, and should give the capability \fBin\fR, which stands for
-\*(lqinsert null\*(rq.
+\*(``insert null\*(''.
.PP
While these are two logically separate attributes (one line versus multi-line
insert mode, and special treatment of untyped spaces) we have seen no
If there is a way to make the cursor completely invisible, give that as
.BR civis .
The capability
-.BR cnorm
+.B cnorm
should be given which undoes the effects of both of these modes.
.PP
If your terminal correctly generates underlined characters
.RS
.TP
run the program
-.BR iprog
+.B iprog
.TP
output
-.BR is1
-.BR is2
+.B is1
+.B is2
.TP
set the margins using
.BR mgc ,
-.BR smgl
+.B smgl
and
-.BR smgr
+.B smgr
.TP
set tabs using
.B tbc
and
-.BR hts
+.B hts
.TP
print the file
-.BR if
+.B if
.TP
and finally
output
can be given as
.BR rs1 ,
.BR rs2 ,
-.BR rf
+.B rf
and
.BR rs3 ,
analogous to
.B is2 ,
.B if
and
-.BR is3
+.B is3
respectively.
These strings are output by the \fB@RESET@\fP program,
which is used when the terminal gets into a wedged state.
Commands are normally placed in
.BR rs1 ,
-.BR rs2
+.B rs2
.B rs3
and
.B rf
The \fB@RESET@\fP program writes strings including
.BR iprog ,
etc., in the same order as the
-.IR init
+.I init
program, using
.BR rs1 ,
etc., instead of
.BR rs2 ,
.BR rs3 ,
or
-.BR rf
+.B rf
reset capability strings are missing, the \fB@RESET@\fP
program falls back upon the corresponding initialization capability string.
.PP
.SS Line Graphics
.PP
Many terminals have alternate character sets useful for forms-drawing.
-Terminfo and \fBcurses\fR build in support for the drawing characters
+Terminfo and \fBcurses\fR have built-in support
+for most of the drawing characters
supported by the VT100, with some characters from the AT&T 4410v1 added.
This alternate character set may be specified by the \fBacsc\fR capability.
.PP
.TS H
center expand;
-l l l l
-l l l l
-lw25 lw10 lw6 lw6.
+l l l l l
+l l l l l
+_ _ _ _ _
+lw25 lw10 lw6 lw6 lw6.
.\".TH
-\fBGlyph ACS Ascii VT100\fR
-\fBName Name Default Name\fR
-UK pound sign ACS_STERLING f }
-arrow pointing down ACS_DARROW v .
-arrow pointing left ACS_LARROW < ,
-arrow pointing right ACS_RARROW > +
-arrow pointing up ACS_UARROW ^ \-
-board of squares ACS_BOARD # h
-bullet ACS_BULLET o ~
-checker board (stipple) ACS_CKBOARD : a
-degree symbol ACS_DEGREE \e f
-diamond ACS_DIAMOND + `
-greater-than-or-equal-to ACS_GEQUAL > z
-greek pi ACS_PI * {
-horizontal line ACS_HLINE \- q
-lantern symbol ACS_LANTERN # i
-large plus or crossover ACS_PLUS + n
-less-than-or-equal-to ACS_LEQUAL < y
-lower left corner ACS_LLCORNER + m
-lower right corner ACS_LRCORNER + j
-not-equal ACS_NEQUAL ! |
-plus/minus ACS_PLMINUS # g
-scan line 1 ACS_S1 ~ o
-scan line 3 ACS_S3 \- p
-scan line 7 ACS_S7 \- r
-scan line 9 ACS_S9 \&_ s
-solid square block ACS_BLOCK # 0
-tee pointing down ACS_TTEE + w
-tee pointing left ACS_RTEE + u
-tee pointing right ACS_LTEE + t
-tee pointing up ACS_BTEE + v
-upper left corner ACS_ULCORNER + l
-upper right corner ACS_URCORNER + k
-vertical line ACS_VLINE | x
+\fBGlyph ACS Ascii acsc acsc\fR
+\fBName Name Default Char Value\fR
+arrow pointing right ACS_RARROW > + 0x2b
+arrow pointing left ACS_LARROW < , 0x2c
+arrow pointing up ACS_UARROW ^ \- 0x2d
+arrow pointing down ACS_DARROW v . 0x2e
+solid square block ACS_BLOCK # 0 0x30
+diamond ACS_DIAMOND + ` 0x60
+checker board (stipple) ACS_CKBOARD : a 0x61
+degree symbol ACS_DEGREE \e f 0x66
+plus/minus ACS_PLMINUS # g 0x67
+board of squares ACS_BOARD # h 0x68
+lantern symbol ACS_LANTERN # i 0x69
+lower right corner ACS_LRCORNER + j 0x6a
+upper right corner ACS_URCORNER + k 0x6b
+upper left corner ACS_ULCORNER + l 0x6c
+lower left corner ACS_LLCORNER + m 0x6d
+large plus or crossover ACS_PLUS + n 0x6e
+scan line 1 ACS_S1 ~ o 0x6f
+scan line 3 ACS_S3 \- p 0x70
+horizontal line ACS_HLINE \- q 0x71
+scan line 7 ACS_S7 \- r 0x72
+scan line 9 ACS_S9 \&_ s 0x73
+tee pointing right ACS_LTEE + t 0x74
+tee pointing left ACS_RTEE + u 0x75
+tee pointing up ACS_BTEE + v 0x76
+tee pointing down ACS_TTEE + w 0x77
+vertical line ACS_VLINE | x 0x78
+less-than-or-equal-to ACS_LEQUAL < y 0x79
+greater-than-or-equal-to ACS_GEQUAL > z 0x7a
+greek pi ACS_PI * { 0x7b
+not-equal ACS_NEQUAL ! | 0x7c
+UK pound sign ACS_STERLING f } 0x7d
+bullet ACS_BULLET o ~ 0x7e
.TE
.PP
+A few notes apply to the table itself:
+.bP
+X/Open Curses incorrectly states that the mapping for \fIlantern\fP is
+uppercase \*(``I\*('' although Unix implementations use the
+lowercase \*(``i\*('' mapping.
+.bP
+The DEC VT100 implemented graphics using the alternate character set
+feature, temporarily switching \fImodes\fP and sending characters
+in the range 0x60 (96) to 0x7e (126)
+(the \fBacsc Value\fP column in the table).
+.bP
+The AT&T terminal added graphics characters outside that range.
+.IP
+Some of the characters within the range do not match the VT100;
+presumably they were used in the AT&T terminal:
+\fIboard of squares\fP replaces the VT100 \fInewline\fP symbol, while
+\fIlantern symbol\fP replaces the VT100 \fIvertical tab\fP symbol.
+The other VT100 symbols for control characters (\fIhorizontal tab\fP,
+\fIcarriage return\fP and \fIline-feed\fP) are not (re)used in curses.
+.PP
The best way to define a new device's graphics set is to add a column
to a copy of this table for your terminal, giving the character which
(when emitted between \fBsmacs\fR/\fBrmacs\fR switches) will be rendered
If the terminal
supports other escape sequences to set background and foreground, they should
be coded as \fBsetf\fR and \fBsetb\fR, respectively.
-The \fBvidputs\fR and the \fBrefresh\fP functions
+The \fBvidputs\fR and the \fBrefresh\fP(3X) functions
use the \fBsetaf\fR and \fBsetab\fR capabilities if they are defined.
.PP
The \fBsetaf\fR/\fBsetab\fR and \fBsetf\fR/\fBsetb\fR capabilities take a
Other specific terminal problems may be corrected by adding more
capabilities of the form \fBx\fR\fIx\fR.
.PP
-.SS Similar Terminals
-.PP
-If there are two very similar terminals, one (the variant) can be defined as
-being just like the other (the base) with certain exceptions.
-In the
-definition of the variant, the string capability \fBuse\fR can be given with
-the name of the base terminal.
-The capabilities given before
-.B use
-override those in the base type named by
-.BR use .
-If there are multiple \fBuse\fR capabilities, they are merged in reverse order.
-That is, the rightmost \fBuse\fR reference is processed first, then the one to
-its left, and so forth.
-Capabilities given explicitly in the entry override
-those brought in by \fBuse\fR references.
-.PP
-A capability can be canceled by placing \fBxx@\fR to the left of the
-use reference that imports it, where \fIxx\fP is the capability.
-For example, the entry
-.RS
-.PP
-2621\-nl, smkx@, rmkx@, use=2621,
-.RE
-.PP
-defines a 2621\-nl that does not have the \fBsmkx\fR or \fBrmkx\fR capabilities,
-and hence does not turn on the function key labels when in visual mode.
-This is useful for different modes for a terminal, or for different
-user preferences.
-.PP
.SS Pitfalls of Long Entries
.PP
Long terminfo entries are unlikely to be a problem; to date, no entry has even
documentation for the AT&T 505 terminal.
.PP
Be careful assigning the \fBkmous\fR capability.
-The \fBncurses\fR wants to
-interpret it as \fBKEY_MOUSE\fR, for use by terminals and emulators like xterm
+The \fBncurses\fR library wants to interpret it as \fBKEY_MOUSE\fR,
+for use by terminals and emulators like xterm
that can return mouse-tracking information in the keyboard-input stream.
.PP
X/Open Curses does not mention italics.
the XSI Curses standard and (in some cases) different extension sets.
Here
is a summary, accurate as of October 1995:
-.PP
+.bP
\fBSVR4, Solaris, ncurses\fR \-\-
These support all SVr4 capabilities.
-.PP
+.bP
\fBSGI\fR \-\-
Supports the SVr4 set, adds one undocumented extended string
capability (\fBset_pglen\fR).
-.PP
+.bP
\fBSVr1, Ultrix\fR \-\-
These support a restricted subset of terminfo capabilities.
The booleans end with \fBxon_xoff\fR;
the numerics with \fBwidth_status_line\fR;
and the strings with \fBprtr_non\fR.
-.PP
+.bP
\fBHP/UX\fR \-\-
Supports the SVr1 subset, plus the SVr[234] numerics \fBnum_labels\fR,
\fBlabel_height\fR, \fBlabel_width\fR, plus function keys 11 through 63, plus
\fBplab_norm\fR, \fBlabel_on\fR, and \fBlabel_off\fR, plus some incompatible
extensions in the string table.
-.PP
+.bP
\fBAIX\fR \-\-
Supports the SVr1 subset, plus function keys 11 through 63, plus a number
of incompatible string table extensions.
-.PP
+.bP
\fBOSF\fR \-\-
Supports both the SVr4 set and the AIX extensions.
.SH FILES
\fBprintf\fR(3),
\fBterm\fR(\*n).
\fBterm_variables\fR(3X).
+\fBuser_caps\fR(5).
.SH AUTHORS
Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey.
Based on pcurses by Pavel Curtis.
projects / ncurses.git / blobdiff