'\" t
.\"***************************************************************************
-.\" Copyright (c) 1998-2012,2016 Free Software Foundation, Inc. *
+.\" Copyright (c) 1998-2016,2017 Free Software Foundation, Inc. *
.\" *
.\" Permission is hereby granted, free of charge, to any person obtaining a *
.\" copy of this software and associated documentation files (the *
.\" authorization. *
.\"***************************************************************************
.\"
-.\" $Id: tput.1,v 1.46 2016/10/22 19:57:25 tom Exp $
+.\" $Id: tput.1,v 1.55 2017/08/19 14:26:42 tom Exp $
.TH @TPUT@ 1 ""
.ds d @TERMINFO@
.ds n 1
.SH SYNOPSIS
\fB@TPUT@\fR [\fB\-T\fR\fItype\fR] \fIcapname\fR [\fIparameters\fR]
.br
-\fB@TPUT@\fR [\fB\-T\fR\fItype\fR] \fBclear\fR
+\fB@TPUT@\fR [\fB\-T\fR\fItype\fR] [\fB\-x\fP] \fBclear\fR
.br
\fB@TPUT@\fR [\fB\-T\fR\fItype\fR] \fBinit\fR
.br
and the \fIcapname\fR associated with each, see \fBterminfo\fR(5).
.SS Options
.TP
-\fB\-T\fR\fItype\fR
-indicates the \fItype\fR of terminal.
-Normally this option is
-unnecessary, because the default is taken from the environment
-variable \fBTERM\fR.
-If \fB\-T\fR is specified, then the shell
-variables \fBLINES\fR and \fBCOLUMNS\fR will also be ignored.
-.TP
\fB\-S\fR
allows more than one capability per invocation of \fB@TPUT@\fR. The
capabilities must be passed to \fB@TPUT@\fR from the standard input
meaning of the \fB0\fR and \fB1\fR boolean and string exit codes (see the
EXIT CODES section).
.IP
-Again, \fB@TPUT@\fR uses a table and the presence of parameters in its input
+Because some capabilities may use
+\fIstring\fP parameters rather than \fInumbers\fP,
+\fB@TPUT@\fR uses a table and the presence of parameters in its input
to decide whether to use \fBtparm\fR(3X),
and how to interpret the parameters.
.TP
+\fB\-T\fR\fItype\fR
+indicates the \fItype\fR of terminal.
+Normally this option is
+unnecessary, because the default is taken from the environment
+variable \fBTERM\fR.
+If \fB\-T\fR is specified, then the shell
+variables \fBLINES\fR and \fBCOLUMNS\fR will also be ignored.
+.TP
\fB\-V\fR
reports the version of ncurses which was used in this program, and exits.
+.TP
+.B \-x
+do not attempt to clear the terminal's scrollback buffer
+using the extended \*(``E3\*('' capability.
.SS Commands
+A few commands (\fBinit\fP, \fBreset\fP and \fBlongname\fP) are
+special; they are defined by the \fB@TPUT@\fP program.
+The others are the names of \fIcapabilities\fP from the terminal database
+(see \fBterminfo\fR(5) for a list).
+Although \fBinit\fP and \fBreset\fP resemble capability names,
+\fB@TPUT@\fP uses several capabilities to perform these special functions.
.TP
\fIcapname\fR
-indicates the capability from the \fBterminfo\fR database. When
-\fBtermcap\fR support is compiled in, the \fBtermcap\fR name for
-the capability is also accepted.
+indicates the capability from the terminal database.
.IP
If the capability is a string that takes parameters, the arguments
following the capability will be used as parameters for the string.
.IP
Most parameters are numbers.
-Only a few terminfo capabilities require string parameters;
+Only a few terminal capabilities require string parameters;
\fB@TPUT@\fR uses a table to decide which to pass as strings.
Normally \fB@TPUT@\fR uses \fBtparm\fR(3X) to perform the substitution.
If no parameters are given for the capability,
\fB@TPUT@\fR writes the string without performing the substitution.
.TP
\fBinit\fR
-If the \fBterminfo\fR database is present and an entry for the user's
+If the terminal database is present and an entry for the user's
terminal exists (see \fB\-T\fR\fItype\fR, above), the following will
occur:
.RS
.TP 5
(1)
-if present, the terminal's initialization strings will be
-output as detailed in the \fBterminfo\fR(5) section on
-.IR "Tabs and Initialization" ,
+first, \fB@TPUT@\fR retrieves the current terminal mode settings
+for your terminal.
+It does this by successively testing
+.RS
+.bP
+the standard error,
+.bP
+standard output,
+.bP
+standard input and
+.bP
+ultimately \*(lq/dev/tty\*(rq
+.RE
+.IP
+to obtain terminal settings.
+Having retrieved these settings, \fB@TPUT@\fP remembers which
+file descriptor to use when updating settings.
.TP
(2)
-any delays (e.g., newline) specified in the entry will
-be set in the tty driver,
+if the window size cannot be obtained from the operating system,
+but the terminal description (or environment, e.g., \fBLINES\fP
+and \fBCOLUMNS\fP variables specify this),
+update the operating system's notion of the window size.
.TP
(3)
+the terminal modes will be updated:
+.RS
+.bP
+any delays (e.g., newline) specified in the entry will
+be set in the tty driver,
+.bP
tabs expansion will be turned on or off according to
the specification in the entry, and
-.TP
-(4)
+.bP
if tabs are not expanded,
standard tabs will be set (every 8 spaces).
.RE
+.TP
+(4)
+if present, the terminal's initialization strings will be
+output as detailed in the \fBterminfo\fR(5) section on
+.IR "Tabs and Initialization" ,
+.TP
+(5)
+output is flushed.
+.RE
.IP
If an entry does not
contain the information needed for any of these activities,
that activity will silently be skipped.
.TP
\fBreset\fR
-Instead of putting out initialization strings, the terminal's
-reset strings will be output if present (\fBrs1\fR, \fBrs2\fR, \fBrs3\fR, \fBrf\fR).
-If the reset strings are not present, but initialization
-strings are, the initialization strings will be output.
+This is similar to \fBinit\fP, with two differences:
+.RS
+.TP 5
+(1)
+before any other initialization,
+the terminal modes will be reset to a \*(``sane\*('' state:
+.RS
+.bP
+set cooked and echo modes,
+.bP
+turn off cbreak and raw modes,
+.bP
+turn on newline translation and
+.bP
+reset any unset special characters to their default values
+.RE
+.TP 5
+(2)
+Instead of putting out \fIinitialization\fP strings, the terminal's
+\fIreset\fP strings will be output if present
+(\fBrs1\fR, \fBrs2\fR, \fBrs3\fR, \fBrf\fR).
+If the \fIreset\fP strings are not present, but \fIinitialization\fP
+strings are, the \fIinitialization\fP strings will be output.
+.RE
+.IP
Otherwise, \fBreset\fR acts identically to \fBinit\fR.
.TP
\fBlongname\fR
-If the \fBterminfo\fR database is present and an entry for the
+If the terminal database is present and an entry for the
user's terminal exists (see \fB\-T\fR\fItype\fR above), then the long name
of the terminal will be put out. The long name is the last
name in the first line of the terminal's description in the
The \fBreset\fP program is usually an alias for \fB@TSET@\fP,
because of this difference with resetting terminal modes and special characters.
.PP
+With the changes made for ncurses 6.1, the \fIreset\fP feature of the
+two programs is (mostly) the same. A few differences remain:
+.bP
+The \fB@TSET@\fP program waits one second when resetting,
+in case it happens to be a hardware terminal.
+.bP
+The two programs write the terminal initialization strings
+to different streams (i.e.,. the standard error for \fB@TSET@\fP and the
+standard output for \fB@TPUT@\fP).
+.IP
+\fBNote:\fP although these programs write to different streams,
+redirecting their output to a file will capture only part of their actions.
+The changes to the terminal modes are not affected by redirecting the output.
+.PP
If \fB@TPUT@\fR is invoked by a link named \fBinit\fR, this has the
same effect as \fB@TPUT@ init\fR.
Again, you are less likely to use that link because another program
whose \fBinit\fP and \fBreset\fP subcommands
(more than half the program) were incorporated from
the \fBreset\fP feature of BSD \fBtset\fP written by Eric Allman.
-Later the corresponding source code for \fIreset\fP
-was removed from the BSD \fBtset\fP
-(in June 1993, released in 4.4BSD-Lite a year later).
.PP
Keith Bostic replaced the BSD \fBtput\fP command in 1989 with a new implementation
based on the AT&T System V program \fBtput\fP.
.PP
Both of these appeared in 4.4BSD,
becoming the \*(lqmodern\*(rq BSD implementation of \fBtput\fP.
+.PP
+This implementation of \fBtput\fP began from a different source than
+AT&T or BSD: Ross Ridge's \fImytinfo\fP package, published on
+\fIcomp.sources.unix\fP in December 1992.
+Ridge's program made more sophisticated use of the terminal capabilities
+than the BSD program.
+Eric Raymond used the \fBtput\fP program
+(and other parts of \fImytinfo\fP) in ncurses in June 1995.
+Using the portions dealing with terminal capabilities
+almost without change,
+Raymond made improvements to the way the command-line parameters
+were handled.
.SH PORTABILITY
.PP
This implementation of \fBtput\fP differs from AT&T \fBtput\fP in
the standard \fIcapname\fR operands, and an internal library
function to analyze nonstandard \fIcapname\fR operands.
.PP
+This implementation (unlike others) can accept both \fItermcap\fP
+and \fIterminfo\fP names for the \fIcapname\fP feature,
+if
+\fItermcap\fR support is compiled in.
+However, the predefined \fItermcap\fP and \fIterminfo\fP names have two
+ambiguities in this case (and the \fIterminfo\fP name is assumed):
+.bP
+The \fItermcap\fP name \fBdl\fP corresponds to
+the \fIterminfo\fP name \fBdl1\fP (delete one line).
+.br
+The \fIterminfo\fP name \fBdl\fP corresponds to
+the \fItermcap\fP name \fBDL\fP (delete a given number of lines).
+.bP
+The \fItermcap\fP name \fBed\fP corresponds to
+the \fIterminfo\fP name \fBrmdc\fP (end delete mode).
+.br
+The \fIterminfo\fP name \fBed\fP corresponds to
+the \fItermcap\fP name \fBcd\fP (clear to end of screen).
+.PP
The \fBlongname\fR and \fB\-S\fR options, and the parameter-substitution
features used in the \fBcup\fR example,
were not supported in BSD curses before 4.3reno (1989) or in