.\" authorization. *
.\"***************************************************************************
.\"
-.\" $Id: tset.1,v 1.22 2010/01/30 21:27:43 tom Exp $
+.\" $Id: tset.1,v 1.25 2010/12/04 18:38:55 tom Exp $
.TH @TSET@ 1 ""
.SH NAME
-\fBtset\fR, \fBreset\fR - terminal initialization
+\fBtset\fR, \fBreset\fR \- terminal initialization
.SH SYNOPSIS
-\fBtset\fR [\fB-IQVcqrsw\fR] [\fB-\fR] [\fB-e\fR \fIch\fR] [\fB-i\fR \fIch\fR] [\fB-k\fR \fIch\fR] [\fB-m\fR \fImapping\fR] [\fIterminal\fR]
+\fBtset\fR [\fB\-IQVcqrsw\fR] [\fB\-\fR] [\fB\-e\fR \fIch\fR] [\fB\-i\fR \fIch\fR] [\fB\-k\fR \fIch\fR] [\fB\-m\fR \fImapping\fR] [\fIterminal\fR]
.br
-\fBreset\fR [\fB-IQVcqrsw\fR] [\fB-\fR] [\fB-e\fR \fIch\fR] [\fB-i\fR \fIch\fR] [\fB-k\fR \fIch\fR] [\fB-m\fR \fImapping\fR] [\fIterminal\fR]
+\fBreset\fR [\fB\-IQVcqrsw\fR] [\fB\-\fR] [\fB\-e\fR \fIch\fR] [\fB\-i\fR \fIch\fR] [\fB\-k\fR \fIch\fR] [\fB\-m\fR \fImapping\fR] [\fIterminal\fR]
.SH DESCRIPTION
\&\fBTset\fR initializes terminals.
\fBTset\fR first determines the type of terminal that you are using.
.PP
3. (BSD systems only.) The terminal type associated with the standard
error output device in the \fI/etc/ttys\fR file.
-(On System-V-like UNIXes and systems using that convention,
+(On System\-V-like UNIXes and systems using that convention,
\fIgetty\fR does this job by setting
\fBTERM\fR according to the type passed to it by \fI/etc/inittab\fR.)
.PP
4. The default terminal type, ``unknown''.
.PP
-If the terminal type was not specified on the command-line, the \fB-m\fR
+If the terminal type was not specified on the command-line, the \fB\-m\fR
option mappings are then applied (see the section
.B TERMINAL TYPE MAPPING
for more information).
Finally, if the erase, interrupt and line kill characters have changed,
or are not set to their default values, their values are displayed to the
standard error output.
-Use the \fB-c\fP or \fB-w\fP option to select only the window sizing
+Use the \fB\-c\fP or \fB\-w\fP option to select only the window sizing
versus the other initialization.
If neither option is given, both are assumed.
.PP
.PP
The options are as follows:
.TP 5
-.B -c
+.B \-c
Set control characters and modes.
-.B -e
+.B \-e
Set the erase character to \fIch\fR.
.TP
-.B -I
+.B \-I
Do not send the terminal or tab initialization strings to the terminal.
.TP
-.B -i
+.B \-i
Set the interrupt character to \fIch\fR.
.TP
-.B -k
+.B \-k
Set the line kill character to \fIch\fR.
.TP
-.B -m
+.B \-m
Specify a mapping from a port type to a terminal.
See the section
.B TERMINAL TYPE MAPPING
for more information.
.TP
-.B -Q
+.B \-Q
Do not display any values for the erase, interrupt and line kill characters.
Normally \fBtset\fR displays the values for control characters which
differ from the system's default values.
.TP
-.B -q
+.B \-q
The terminal type is displayed to the standard output, and the terminal is
-not initialized in any way. The option `-' by itself is equivalent but
+not initialized in any way. The option `\-' by itself is equivalent but
archaic.
.TP
-.B -r
+.B \-r
Print the terminal type to the standard error output.
.TP
-.B -s
+.B \-s
Print the sequence of shell commands to initialize the environment variable
\fBTERM\fR to the standard output.
See the section
.B SETTING THE ENVIRONMENT
for details.
.TP
-.B -V
+.B \-V
reports the version of ncurses which was used in this program, and exits.
.TP
-.B -w
+.B \-w
Resize the window to match the size deduced via \fBsetupterm\fP.
Normally this has no effect,
unless \fBsetupterm\fP is not able to detect the window size.
.PP
-The arguments for the \fB-e\fR, \fB-i\fR, and \fB-k\fR
+The arguments for the \fB\-e\fR, \fB\-i\fR, and \fB\-k\fR
options may either be entered as actual characters or by using the `hat'
notation, i.e., control-h may be specified as ``^H'' or ``^h''.
.
.SH SETTING THE ENVIRONMENT
It is often desirable to enter the terminal type and information about
the terminal's capabilities into the shell's environment.
-This is done using the \fB-s\fR option.
+This is done using the \fB\-s\fR option.
.PP
-When the \fB-s\fR option is specified, the commands to enter the information
+When the \fB\-s\fR option is specified, the commands to enter the information
into the shell's environment are written to the standard output. If
the \fBSHELL\fR environmental variable ends in ``csh'', the commands
are for \fBcsh\fR, otherwise, they are for \fBsh\fR.
\fBnoglob\fR, leaving it unset. The following line in the \fB.login\fR
or \fB.profile\fR files will initialize the environment correctly:
.sp
- eval \`tset -s options ... \`
+ eval \`tset \-s options ... \`
.
.SH TERMINAL TYPE MAPPING
When the terminal is not hardwired into the system (or the current
When \fBtset\fR is used in a startup script it is often desirable to
provide information about the type of terminal used on such ports.
.PP
-The purpose of the \fB-m\fR option is to map
+The purpose of the \fB\-m\fR option is to map
from some set of conditions to a terminal type, that is, to
tell \fBtset\fR
``If I'm on this port at a particular speed, guess that I'm on that
kind of terminal''.
.PP
-The argument to the \fB-m\fR option consists of an optional port type, an
+The argument to the \fB\-m\fR option consists of an optional port type, an
optional operator, an optional baud rate specification, an optional
colon (``:'') character and a terminal type. The port type is a
string (delimited by either the operator or the colon character). The
of the standard error output (which should be the control terminal).
The terminal type is a string.
.PP
-If the terminal type is not specified on the command line, the \fB-m\fR
+If the terminal type is not specified on the command line, the \fB\-m\fR
mappings are applied to the terminal type. If the port type and baud
rate match the mapping, the terminal type specified in the mapping
replaces the current type. If more than one mapping is specified, the
.PP
If no baud rate is specified, the terminal type will match any baud rate.
If no port type is specified, the terminal type will match any port type.
-For example, \fB-m dialup:vt100 -m :?xterm\fR
+For example, \fB\-m dialup:vt100 \-m :?xterm\fR
will cause any dialup port, regardless of baud rate, to match the terminal
type vt100, and any non-dialup port type to match the terminal type ?xterm.
Note, because of the leading question mark, the user will be
queried on a default port as to whether they are actually using an xterm
terminal.
.PP
-No whitespace characters are permitted in the \fB-m\fR option argument.
+No whitespace characters are permitted in the \fB\-m\fR option argument.
Also, to avoid problems with meta-characters, it is suggested that the
-entire \fB-m\fR option argument be placed within single quote characters,
+entire \fB\-m\fR option argument be placed within single quote characters,
and that \fBcsh\fR users insert a backslash character (``\e'') before
any exclamation marks (``!'').
.SH HISTORY
\fBtset\fR's most important use). This implementation behaves like 4.4BSD
tset, with a few exceptions specified here.
.PP
-The \fB-S\fR option of BSD tset no longer works; it prints an error message to stderr
-and dies. The \fB-s\fR option only sets \fBTERM\fR, not \fBTERMCAP\fP. Both these
+The \fB\-S\fR option of BSD tset no longer works; it prints an error message to stderr
+and dies. The \fB\-s\fR option only sets \fBTERM\fR, not \fBTERMCAP\fP. Both these
changes are because the \fBTERMCAP\fR variable is no longer supported under
-terminfo-based \fBncurses\fR, which makes \fBtset -S\fR useless (we made it die
+terminfo-based \fBncurses\fR, which makes \fBtset \-S\fR useless (we made it die
noisily rather than silently induce lossage).
.PP
There was an undocumented 4.4BSD feature that invoking tset via a link named
`TSET` (or via any other name beginning with an upper-case letter) set the
terminal to use upper-case only. This feature has been omitted.
.PP
-The \fB-A\fR, \fB-E\fR, \fB-h\fR, \fB-u\fR and \fB-v\fR
+The \fB\-A\fR, \fB\-E\fR, \fB\-h\fR, \fB\-u\fR and \fB\-v\fR
options were deleted from the \fBtset\fR
utility in 4.4BSD.
None of them were documented in 4.3BSD and all are
of limited utility at best.
-The \fB-a\fR, \fB-d\fR, and \fB-p\fR options are similarly
+The \fB\-a\fR, \fB\-d\fR, and \fB\-p\fR options are similarly
not documented or useful, but were retained as they appear to be in
widespread use. It is strongly recommended that any usage of these
-three options be changed to use the \fB-m\fR option instead. The
--n option remains, but has no effect. The \fB-adnp\fR options are therefore
+three options be changed to use the \fB\-m\fR option instead. The
+\fB\-n\fP option remains, but has no effect. The \fB\-adnp\fR options are therefore
omitted from the usage summary above.
.PP
-It is still permissible to specify the \fB-e\fR, \fB-i\fR, and \fB-k\fR options without
+It is still permissible to specify the \fB\-e\fR, \fB\-i\fR, and \fB\-k\fR options without
arguments, although it is strongly recommended that such usage be fixed to
explicitly specify the character.
.PP
-As of 4.4BSD, executing \fBtset\fR as \fBreset\fR no longer implies the \fB-Q\fR
-option. Also, the interaction between the - option and the \fIterminal\fR
+As of 4.4BSD, executing \fBtset\fR as \fBreset\fR no longer implies the \fB\-Q\fR
+option. Also, the interaction between the \- option and the \fIterminal\fR
argument in some historic implementations of \fBtset\fR has been removed.
.SH ENVIRONMENT
The \fBtset\fR command uses these environment variables:
.PP
This describes \fBncurses\fR
version @NCURSES_MAJOR@.@NCURSES_MINOR@ (patch @NCURSES_PATCH@).
-.\"#
-.\"# The following sets edit modes for GNU EMACS
-.\"# Local Variables:
-.\"# mode:nroff
-.\"# fill-column:79
-.\"# End:
projects / ncurses.git / blobdiff