# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.312 $
-# $Date: 2007/10/13 17:26:29 $
+# $Revision: 1.363 $
+# $Date: 2010/06/12 14:39:51 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, use=ansi+local1,
ansi+tabs,
- cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g,
+ cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
ansi+inittabs,
it#8, use=ansi+tabs,
ansi+erase,
cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g,
+ kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
use=klone+sgr-dumb,
pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
lines#25, use=pcansi-m,
kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
- s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g,
+ s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
vpa=\E[%i%p1%dd, use=pcansi-m,
ansi+enq|ncurses extension for ANSI ENQ,
clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
- khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u,
+ khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
u7=\E[6n, use=klone+color, use=klone+sgr8,
+
+# Keypad: Home=\0G Up=\0H PrPag=\0I
+# ka1,kh kcuu1 kpp,ka3
+#
+# Left=\0K 5=\0L Right=\0M
+# kcub1 kb2 kcuf1
+#
+# End=\0O Down=\0P NxPag=\0Q
+# kc1,kend kcud1 kc3,knp
+#
+# Ins=\0R Del=\0S
+# kich1 kdch1
+#
+# On keyboard with 12 function keys,
+# shifted f-keys: F13-F24
+# control f-keys: F25-F36
+# alt f-keys: F37-F48
+# The shift/control/alt keys do not modify each other, but alt overrides both,
+# and control overrides shift.
+#
+# <pfkey> capability for F1-F48 -TD
ansi.sys|ANSI.SYS 3.1 and later versions,
- el=\E[K, use=ansi.sys-old,
+ el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
+ kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
+ kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
+ kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
+ kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
+ kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
+ kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
+ kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
+ kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
+ kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
+ kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
+ kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
+ pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%?%p1%{13}%<%t%'z'%e%?%p1%{23}%<%t%'G'%e%?%p1%{25}%<%t%'p'%e%?%p1%'#'%<%t%'E'%e%?%p1%'%'%<%t%'f'%e%?%p1%'/'%<%t%'C'%e%{92}%;%;%;%;%;%;%;%p1%+%d;%p2"%s"p,
+ use=ansi.sys-old,
#
# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
#### ANSI console types
#
+#############################################################################
+#
+# Atari ST terminals.
+# From Guido Flohr <gufl0000@stud.uni-sb.de>.
+#
+tw52|tw52-color|Toswin window manager with color,
+ bce,
+ colors#16, pairs#256,
+ oc=\Eb?\Ec0, op=\Eb?\Ec0,
+ setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+ setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+ setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+ setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+ use=tw52-m,
+tw52-m|Toswin window manager monochrome,
+ ul,
+ ma#999,
+ bold=\Eya, dch1=\Ea, dim=\EyB,
+ is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
+ rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
+ smso=\EyQ, smul=\EyH, use=at-m,
+tt52|Atari TT medium and high resolution,
+ lines#30, use=at-color,
+st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
+ bce,
+ colors#16, pairs#256,
+ is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
+ setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+ setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+ setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+ setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+ use=st52,
+st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
+ am, eo, mir, npc,
+ cols#80, it#8, lines#24,
+ bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
+ cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
+ il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
+ kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
+ kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
+ kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
+ kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
+ kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
+ rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
+tw100|toswin vt100 window mgr,
+ eo, mir, msgr, xon,
+ colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++\,\,hhII00,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
+ clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
+ cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
+ kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
+ kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
+ kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
+ kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
+ knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
+ oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
+ rmso=\E[m, rmul=\E[m,
+ rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
+ sc=\E7,
+ setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
+ setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
+ sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+# The entries for stv52 and stv52pc probably need a revision.
+stv52|MiNT virtual console,
+ am, msgr,
+ cols#80, it#8, lines#30,
+ bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
+ cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
+ dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
+ ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
+ kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
+ kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
+ kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
+ kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
+ op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
+ rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
+ smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
+stv52pc|MiNT virtual console with PC charset,
+ am, msgr,
+ cols#80, it#8, lines#30,
+ acsc=`\177a\260f\370g\361j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371.v-\^+\257\,\256h\261I\3740\333,
+ bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
+ cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
+ dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
+ ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
+ kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
+ kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
+ kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
+ kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
+ rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
+ rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
+ smso=\Ep, smul=\EyH,
+
+#### Atari ST
+#
+
+# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
+atari-old|atari st,
+ OTbs, am,
+ cols#80, it#8, lines#25,
+ clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
+ ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
+# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
+# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
+uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
+ lines#49,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
+ use=vt220,
+# MiNT VT52 emulation. 80 columns, 25 rows.
+# MiNT is Now TOS, the operating system which comes with all Ataris now
+# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
+# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
+# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
+st52-old|Atari ST with VT52 emulation,
+ am, km,
+ cols#80, lines#25,
+ bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
+ cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
+ ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
+ kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
+ kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
+ kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
+ kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
+ ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
+ smcup=\Ee, smso=\Ep,
+
#### BeOS
#
# BeOS entry for Terminal program Seems to be almost ANSI
# 1.9.9.
linux-c-nc|linux console with color-change,
ccc,
- initc=\E]P%p1%x%p2%{256}%*%{1000}%/%02x%p3%{256}%*%{1000}%/%02x%p4%{256}%*%{1000}%/%02x,
+ initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
oc=\E]R, use=linux-basic,
# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
linux-c|linux console 1.3.6+ for older ncurses,
ccc,
- initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
+ initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
oc=\E]R, use=linux-basic,
# The 2.2.x kernels add a private mode that sets the cursor type; use that to
civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
cvvis=\E[?25h\E[?8c, use=linux-c-nc,
+# Subject: linux 2.6.26 vt back_color_erase
+# Changes to the Linux console driver broke bce model as reported in
+# https://bugzilla.novell.com/show_bug.cgi?id=418613
+# apparently from
+# http://lkml.org/lkml/2008/4/26/305
+# http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
+linux2.6.26|linux console w/o bce,
+ bce@, use=linux,
+
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
linux-nic|linux with ich/ich1 suppressed for non-curses programs,
ich@, ich1@, use=linux,
initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
use=linux,
+# 16-color linux console entry; this works with a 256-character
+# console font but bright background colors turn into dim ones when
+# you use a 512-character console font. This uses bold for bright
+# foreground colors and blink for bright background colors.
+linux-16color|linux console with 16 colors,
+ colors#16, ncv#54, pairs#256,
+ setab=\E[4%p1%{7}%m%d%?%p1%{7}%>%t;5%e;25%;m,
+ setaf=\E[3%p1%{7}%m%d%?%p1%{7}%>%t;1%e;21%;m,
+ use=linux,
+
+# bterm (bogl 0.1.18)
+# Implementation is in bogl-term.c
+# Key capabilities from linux terminfo entry
+#
+# Notes:
+# bterm only supports acs using wide-characters, has case for these: qjxamlkut
+# bterm does not support sgr, since it only processes one parameter -TD
+bterm|bogl virtual terminal,
+ am, bce,
+ colors#8, cols#80, lines#24, pairs#64,
+ acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
+ cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
+ kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
+ kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
+ kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
+ op=\E49;39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
+ rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
+
#### Mach
#
sc=\E7,
sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
- tbc=\E[2g, vpa=\E[%i%p1%dd, use=klone+color,
+ tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
pc6300plus|AT&T 6300 plus,
OTbs, am, xon,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
- smul=\E[4m, tbc=\E[2g,
+ smul=\E[4m, tbc=\E[3g,
tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
#
qansi|QNX ansi with console writes,
indn=\E[%p1%dS,
initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
- kb2=\E[G, kbs=\177, kcan=^C, kcbt=\E[Z, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
- kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
- kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
- kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
+ kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
+ kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
# retrieving the window title, and for setting the window size (i.e., using
# "resize -s"), though it does not pass SIGWINCH to the application if the
# user resizes the window with the mouse.
-teraterm|Tera Term Pro,
+teraterm2.3|Tera Term Pro,
km, xon@,
ncv#43, vt@,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
use=klone+color, use=vt100,
+# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
+# to choose a Windows OEM font).
+#
+# Testing with tack:
+# - it does not have xenl (suppress that)
+# - underline seems to work with color (modify ncv).
+# Testing with vttest:
+# - wrapping differs from vt100 (menu 1).
+# - it recognizes xterm's X10 and normal mouse tracking, but none of the
+# other flavors.
+# - it recognizes the dtterm window controls for reporting size in
+# characters and pixels.
+# - it passes SIGWINCH.
+teraterm4.59|Tera Term Pro,
+ bce, xenl@,
+ ncv#41,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ kmous=\E[M, use=teraterm2.3,
+
+teraterm|Tera Term,
+ use=teraterm4.59,
+
# Tested with WinNT 4.0, the telnet application assumes the screensize is
# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
#
cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
rin=\E[%p1%dT, use=xterm-xf86-v43,
-# This is the most common alias for xterm-new.
xterm-xfree86|xterm terminal emulator (XFree86),
- use=xterm-new,
-# use=xterm-old,
+ use=xterm-xf86-v44,
# This version reflects the current xterm features.
xterm-new|modern xterm terminal emulator,
npc,
indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H,
- kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~,
- kRIT=\E[1;2C, kb2=\EOE, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB,
- kcuf1=\EOC, kcuu1=\EOA, kend=\EOF, kent=\EOM, khome=\EOH,
- kich1=\E[2~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
- kpp=\E[5~, kri=\E[1;2A, rin=\E[%p1%dT, use=xterm+pcfkeys,
+ kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kb2=\EOE,
+ kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kend=\EOF, kent=\EOM, khome=\EOH, kich1=\E[2~, kmous=\E[M,
+ knp=\E[6~, kpp=\E[5~, rin=\E[%p1%dT, use=xterm+pcfkeys,
use=xterm-basic,
#
# This fragment describes as much of XFree86 xterm's "pc-style" function
# The meta key may also be used as a modifier in this scheme, adding another
# bit to the parameter.
xterm+pcfkeys|fragment for PC-style fkeys,
- use=xterm+pcf2, use=xterm+pcc2,
+ use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
+ use=xterm+pce2,
+#
+xterm+noapp|fragment with cursor keys in normal mode,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
+ khome=\E[H,
+
+xterm+app|fragment with cursor keys in application mode,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
+ khome=\EOH,
#
# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
# and revised in patch #167 (2002/8/24). Some other terminal emulators copied
# modifyCursorKeys resource. These fragments list the modified cursor-keys
# that might apply to xterm+pcfkeys with different values of that resource.
xterm+pcc3|fragment with modifyCursorKeys:3,
- kDN=\E[>1;2B, kDN5=\E[>1;5B, kDN6=\E[>1;6B,
- kLFT5=\E[>1;5D, kLFT6=\E[>1;6D, kRIT5=\E[>1;5C,
- kRIT6=\E[>1;6C, kUP=\E[>1;2A, kUP5=\E[>1;5A,
- kUP6=\E[>1;6A,
+ kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
+ kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
+ kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
+ kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
+ kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
+ kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
+ kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
+ kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
+ kUP7=\E[>1;7A,
xterm+pcc2|fragment with modifyCursorKeys:2,
- kDN=\E[1;2B, kDN5=\E[1;5B, kDN6=\E[1;6B, kLFT5=\E[1;5D,
- kLFT6=\E[1;6D, kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP=\E[1;2A,
- kUP5=\E[1;5A, kUP6=\E[1;6A,
+ kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
+ kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
+ kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
+ kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
+ kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
+ kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
+ kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
xterm+pcc1|fragment with modifyCursorKeys:1,
- kDN=\E[2B, kDN5=\E[5B, kDN6=\E[6B, kLFT5=\E[5D,
- kLFT6=\E[6D, kRIT5=\E[5C, kRIT6=\E[6C, kUP=\E[2A,
- kUP5=\E[5A, kUP6=\E[6A,
+ kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
+ kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
+ kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
+ kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
+ kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
+ kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
xterm+pcc0|fragment with modifyCursorKeys:0,
- kDN=\EO2B, kDN5=\EO5B, kDN6=\EO6B, kLFT5=\EO5D,
- kLFT6=\EO6D, kRIT5=\EO5C, kRIT6=\EO6C, kUP=\EO2A,
- kUP5=\EO5A, kUP6=\EO6A,
+ kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
+ kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
+ kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
+ kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
+ kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
+ kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
+
#
# Here are corresponding fragments from xterm patch #216:
#
kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~,
#
+# Chunks from xterm #230:
+xterm+pce2|fragment with modifyCursorKeys:2,
+ kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
+ kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
+ kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
+ kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
+ kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
+ kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
+ kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
+ kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
+ kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
+ kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
+ use=xterm+edit,
+
+xterm+edit|fragment for 6-key editing-keypad,
+ kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ use=xterm+pc+edit,
+
+xterm+pc+edit|fragment for pc-style editing keypad,
+ kend=\E[4~, khome=\E[1~,
+
+xterm+vt+edit|fragment for vt220-style editing keypad,
+ kfnd=\E[1~, kslt=\E[4~,
+
+#
+# Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
+# Alternatively, the same scheme with old-style function keys as in xterm-r6
+# is shown here (because that is used in mrxvt and mlterm):
+xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
+ kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
+ kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
+ kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
+ kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
+ kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
+ kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
+ kf63=\E[13;4~, use=xterm+pcf2,
+#
# This chunk is used for building the VT220/Sun/PC keyboard variants.
xterm-basic|modern xterm terminal emulator - common,
OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H,
- kdch1=\E[3~, kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
- meml=\El, memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
+ memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
-# This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
+# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
+# If configured to support 88- or 256-colors (which is fairly common in 2009),
+# xterm also recognizes the control sequences for initc -TD
xterm-16color|xterm with 16 colors like aixterm,
+ ccc,
+ initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
use=ibm+16color, use=xterm-new,
-# This is a compile-time feature of XFree86 xterm beginning with
+# 256-colors is a compile-time feature of XFree86 xterm beginning with
# patch #111 (1999/7/10) -TD
xterm+256color|xterm 256-color feature,
ccc,
setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
setb@, setf@,
-# This is a compile-time feature of XFree86 xterm beginning with
+# 88-colors is a compile-time feature of XFree86 xterm beginning with
# patch #115 (1999/9/18) -TD
#
# Note that the escape sequences used are the same as for 256-colors - xterm
# which support the xterm+256color feature support the associated initc
# capability. So it is cancelled in the entries which use this and/or the
# xterm+256color block.
+#
+# The default color palette for the 256- and 88-colors are different. A
+# given executable will have one palette (perhaps compiled-in). If the program
+# supports xterm's control sequence, it can be programmed using initc.
xterm+88color|xterm 88-color feature,
colors#88, pairs#7744, use=xterm+256color,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
- use=xterm-basic, use=vt220+keypad,
+ use=xterm+app, use=xterm+edit, use=xterm-basic,
+ use=vt220+keypad,
xterm-vt52|xterm emulating dec vt52,
cols#80, it#8, lines#24,
kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
xterm-noapp|xterm with cursor keys in normal mode,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rmcup@,
- rmkx=\E>, smcup@, smkx=\E=, use=xterm,
+ rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
+ use=xterm,
xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
- lines#24, use=xterm,
+ lines#24, use=xterm-old,
# This is xterm for ncurses.
xterm|xterm terminal emulator (X Window System),
#
# xterm with bold instead of underline
xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
- smso=\E[7m, smul=\E[1m, use=xterm,
+ smso=\E[7m, smul=\E[1m, use=xterm-old,
# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
# (kterm should not invoke DEC Graphics as the alternate character set
# -- Kenji Rikitake)
rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
+# GNOME Terminal 2.18.1 (2007 snapshot)
+#
+# For any "recent" version of gnome-terminal, it is futile to attempt to
+# support modifiers on cursor- and keypad keys because the program usually
+# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
+# of the keys (which more/less correspond to the termcap values), and will
+# interpret those according to the $TERM value, but others not in the
+# terminfo according to some constantly changing set of hacker guidelines -TD
+gnome-2007|GNOME Terminal snapshot 2.18.1,
+ use=xterm+pcc2, use=gnome-fc5,
+
+# GNOME Terminal 2.22.3 (2008 snapshot)
+#
+# In vttest, it claims to be a vt220 with national replacement character-sets,
+# but aside from the identifier string, implements only a small fraction of
+# vt220's behavior, which will make it less usable on a VMS system (unclear
+# what the intent of the developer is, since the NRC feature exposed in vttest
+# by this change does not work).
+gnome-2008|GNOME Terminal snapshot 2.22.3,
+ use=gnome+pcfkeys, use=gnome-2007,
+
+# GNOME terminal may automatically use the contents of the "xterm" terminfo to
+# supply key information which is not built into the program. With 2.22.3,
+# this list is built into the program (which addresses the inadvertant use of
+# random terminfo data, though using a set of values which does not correspond
+# to any that xterm produces - still not solving the problem that GNOME
+# terminal hardcodes the $TERM variable as "xterm").
+#
+# terminfo modifier code keys
+# kf13-kf24 shift 2 F1 to F12
+# kf25-kf36 control 5 F1 to F12
+# kf37-kf48 shift/control 6 F1 to F12
+# kf49-kf60 alt 3 F1 to F12
+# kf61-kf63 shift-alt 4 F1 to F3
+#
+# The parameters with \EO (SS3) are technically an error, since SS3 should have
+# no parameters. This appears to be rote copying based on xterm+pcc0.
+gnome+pcfkeys|gnome variation on xterm+pcfkeys,
+ kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
+ kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
+ kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
+ kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
+ kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
+ kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
+ use=xterm+pcfkeys,
+
gnome|GNOME Terminal,
- use=gnome-fc5,
+ use=gnome-2008,
# palette is hardcoded...
gnome-256color|GNOME Terminal with xterm 256-colors,
#
# Updated for konsole 1.6.4:
# add konsole-solaris
+#
+# Updated for konsole 1.6.6:
+# add control-key modifiers for function-keys, etc.
+#
+# vttest menu 1 shows that both konsole and gnome terminal do wrapping
+# different from xterm (and vt100's). They have the same behavior in this
+# detail, but it is unclear which copies the other.
konsole-base|KDE console window,
bce, km@, npc,
bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
# The value for kbs reflects local customization rather than the settings used
# for XFree86 xterm.
konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
- kend=\EOF, kf1=\EOP, kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R,
- kf16=\EO2S, kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
- kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
- kf23=\E[23;2~, kf24=\E[24;2~, kf3=\EOR, kf4=\EOS,
- khome=\EOH, use=konsole-vt100,
+ kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
+ use=konsole-vt100,
+# Konsole does not implement shifted cursor-keys.
+konsole+pcfkeys|konsole subset of xterm+pcfkeys,
+ kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
+ use=xterm+pcf0,
# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
# it is still useful for deriving the other entries.
konsole-vt100|KDE console window with vt100 (sic) keyboard,
# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
-# control/shit/alt kf1 to kf12 \E[11;8~ to \E[24;8~
+# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
#
mlterm|multi lingual terminal emulator,
am, eslok, km, mc5i, mir, msgr, npc, xenl,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
- kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\E[11~, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
- kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
- kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
- kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
- kf24=\E[24;2~, kf25=\E[11;5~, kf26=\E[12;5~,
- kf27=\E[13;5~, kf28=\E[14;5~, kf29=\E[15;5~, kf3=\E[13~,
- kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
- kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
- kf36=\E[24;5~, kf37=\E[11;6~, kf38=\E[12;6~,
- kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~, kf41=\E[15;6~,
- kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
- kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
- kf48=\E[24;6~, kf49=\E[11;3~, kf5=\E[15~, kf50=\E[12;3~,
- kf51=\E[13;3~, kf52=\E[14;3~, kf53=\E[15;3~,
- kf54=\E[17;3~, kf55=\E[18;3~, kf56=\E[19;3~,
- kf57=\E[20;3~, kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~,
- kf60=\E[24;3~, kf61=\E[11;4~, kf62=\E[12;4~,
- kf63=\E[13;4~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
- kpp=\E[5~, kslt=\E[4~, mc0=\E[i, nel=\EE, op=\E[39;49m,
- rc=\E8, rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmacs=\E(B,
- rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
- rmso=\E[27m, rmul=\E[24m,
+ kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
+ khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
+ knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
+ nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
- vpa=\E[%i%p1%dd, use=mlterm+pcfkeys,
+ vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
# The insert/delete/home/end keys do not respond to modifiers because mlterm
# looks in its termcap to decide which string to send. If it used terminfo
# (when available), it could use the extended names introduced for xterm.
mlterm+pcfkeys|fragment for PC-style fkeys,
kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
- kDN=\EO1;2B, kDN5=\EO1;5B, kDN6=\EO1;6B, kIC5=\E[2;5~,
- kIC6=\E[2;6~, kLFT5=\EO1;5D, kLFT6=\EO1;6D,
- kNXT5=\E[6;5~, kNXT6=\E[6;6~, kPRV5=\E[5;5~,
- kPRV6=\E[5;6~, kRIT5=\EO1;5C, kRIT6=\EO1;6C, kUP=\EO1;2A,
- kUP5=\EO1;5A, kUP6=\EO1;6A,
+ kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
+ kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
+ kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
+ kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
+ kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
+ kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
+ kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
+ kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
+
+mlterm-256color|mlterm 3.0 with xterm 256-colors,
+ use=xterm+256color, use=rxvt,
# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
#
# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
# Since rxvt is not really compatible with xterm, it should be configured as
-# "rxvt" (monochrome) and "rxvt-color".
+# "rxvt" or "rxvt-color".
#
# removed dch/dch1 because they are inconsistent with bce/ech -TD
# remove km as per tack test -TD
kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
- kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb,
- kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@,
- kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^,
- kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc,
- kUP=\E[a, kUP5=\EOa,
+ kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
+ kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
+ kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
+ kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
+ kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
+ kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
rxvt|rxvt terminal emulator (X Window System),
ncv@,
use=rxvt,
rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
use=xterm+256color, use=rxvt,
+rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
+ use=xterm+88color, use=rxvt,
rxvt-xpm|rxvt terminal emulator (X Window System),
use=rxvt,
rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
rxvt-16color|xterm with 16 colors like aixterm,
ncv#32, use=ibm+16color, use=rxvt,
+# mrxvt 0.5.4
+#
+# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
+# makes its function-keys different from other flavors of rxvt -TD
+mrxvt|multitabbed rxvt,
+ kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
+ kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
+ kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
+ kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
+ kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
+ use=rxvt,
+
+mrxvt-256color|multitabbed rxvt with 256 colors,
+ use=xterm+256color, use=mrxvt,
+
# From: Michael Jennings <mej@valinux.com>
#
# Eterm 0.9.3
vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
use=ecma+color,
+Eterm-256color|Eterm with xterm 256-colors,
+ use=xterm+256color, use=Eterm,
+
+Eterm-88color|Eterm with 88 colors,
+ use=xterm+88color, use=Eterm,
+
+# Based on rxvt 2.4.8, it has a few differences in key bindings
+aterm|AfterStep terminal,
+ kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
+
# xiterm 0.5-5.2
# This is not based on xterm's source...
# vttest shows several problems with keyboard, cursor-movements.
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
u7=\E[6n, vpa=\E[%i%p1%dd,
+#### VWM
+#
+# vwmterm is a terminal emulator written for the VWM console window manager
+#
+vwmterm|(vwm term),
+ am, bce, ccc, mir, msgr, npc, xenl, xon,
+ colors#8, pairs#64,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K, home=\E[H,
+ il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
+ kf10=\E[21~, kf11=\E[22~, kf12=\E[23~, kf2=\E[[B,
+ kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[1~, knp=\E[6~, kpp=\E[5~,
+ rev=\E[7m, rmacs=\E[10m, rmam=\E[?7l, rmcup=\E[?1049l,
+ rs1=\E[H\E[J\E[m\Ec, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
+ smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
+
#### MGR
#
# MGR is a Bell Labs window system lighter-weight than X.
sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
smul=\E[4m,
+# The codes supported by the term.el terminal emulation in GNU Emacs 22.2
+eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
+ am, mir, msgr, xenl,
+ colors#8, cols#80, lines#24, pairs#64,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
+ ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
+ sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
+ sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
+ sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ u6=\E[%i%d;%dR, u7=\E[6n,
+
# Entries for use by the `screen' program by Juergen Weigert,
# Michael Schroeder, Oliver Laumann. The screen and
# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
# The bce and status-line entries are from screen 3.9.13 (and require some
# changes to .screenrc).
screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
- bce, use=screen,
+ bce,
+ ech@, use=screen,
screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
# if the terminal is wide (132 cols or more)). If even this
# entry cannot be found, "vt100" is used as a substitute.
#
+# Notwithstanding the manpage, screen uses its own notion of the termcap
+# and some keys from "screen.<term>" are ignored. Here is an entry which
+# covers those (tested with screen 4.00.02) -TD
+screen+fkeys|function-keys according to screen,
+ kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
+ khome=\E[1~, kslt@,
+#
# Here are a few customized entries which are useful -TD
#
# Notes:
# (a) screen does not support invis.
# (b) screen's implementation of bw is incorrect according to tack.
# (c) screen appears to hardcode the strings for khome/kend, making it
-# necessary to override the "use=" clause's values.
+# necessary to override the "use=" clause's values (screen+fkeys).
# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
# which is NOT the same as the terminfo screen.<term>.
# (e) when screen finds one of these customized entries, it sets $TERM to
# translation. They are suppressed here to show what is tested by tack.
screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
bce@, bw,
- invis@, kIC@, kNXT@, kPRV@, kend=\E[4~, khome=\E[1~, meml@,
- memu@,
+ invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
- use=xterm-new,
+ use=screen+fkeys, use=xterm-new,
# xterm-r6 does not really support khome/kend unless it is propped up by
# the translations resource.
screen.xterm-r6|screen customized for X11R6 xterm,
- bw, use=xterm-r6,
+ bw, use=screen+fkeys, use=xterm-r6,
# Color applications running in screen and TeraTerm do not play well together
# on Solaris because Sun's curses implementation gets confused.
screen.teraterm|disable ncv in teraterm,
ncv#127,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- use=screen,
+ use=screen+fkeys, use=screen,
+# Other terminals
+screen.rxvt|screen in rxvt,
+ bw,
+ cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
+ use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
+screen.Eterm|screen in Eterm,
+ use=screen+fkeys, use=Eterm,
+screen.mrxvt|screen in mrxvt,
+ use=screen+fkeys, use=mrxvt,
+screen.gnome|screen in GNOME Terminal,
+ use=screen+fkeys, use=gnome,
+screen.konsole|screen in KDE console window,
+ use=screen+fkeys, use=konsole,
# fix the backspace key
screen.linux|screen in linux console,
bw,
- kbs=\177, kcbt@, use=screen,
+ kbs=\177, kcbt@, use=screen+fkeys, use=screen,
+screen.mlterm|screen in mlterm,
+ use=screen+fkeys, use=mlterm,
+
+# The default "screen" entry is reasonably portable, but not optimal for the
+# most widely-used terminal emulators. The "bce" capability is supported in
+# screen since 3.9.13, and when used, will require fewer characters to be sent
+# to the terminal for updates.
+#
+# If you are using only terminals which support bce, then you can use this
+# feature in your screen configuration.
+#
+# Adding these lines to your ".screenrc" file will allow using these customized
+# entries:
+# term screen-bce
+# bce on
+# defbce on
+screen-bce.xterm-new|screen optimized for modern xterm,
+ bce,
+ ech@, use=screen.xterm-new,
+screen-bce.rxvt|screen optimized for rxvt,
+ bce,
+ ech@, use=screen.rxvt,
+screen-bce.Eterm|screen optimized for Eterm,
+ bce,
+ ech@, use=screen.Eterm,
+screen-bce.mrxvt|screen optimized for mrxvt,
+ bce,
+ ech@, use=screen.mrxvt,
+screen-bce.gnome|screen optimized for GNOME-Terminal,
+ bce,
+ ech@, use=screen.gnome,
+screen-bce.konsole|screen optimized for KDE console window,
+ bce,
+ ech@, use=screen.konsole,
+screen-bce.linux|screen optimized for linux console,
+ bce,
+ ech@, use=screen.linux,
+screen-bce.mlterm|screen optimized for mlterm,
+ bce,
+ ech@, use=screen.mlterm,
screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
cols#132, use=screen,
# Most of the current references to sun-color are from users wondering why this
# is the default on install. Details from reading the wscons manpage, adding
# cub, etc., here (rather than in the base sun-il entry) since it is not clear
-# when those were added -TD
+# when those were added -TD (2005-05-28)
+#
+# According to wscons manpage, color is supported only on IA systems.
+# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
+# does not list these. It also sets ncv#3, however that corresponds to
+# underline and standout.
+#
+# Since the documentation and terminfo do not agree, see also current code at
+# http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
+#
+# That (actually a different driver which "supports" sun-color) also supports
+# these features:
+# vpa=\E[%i%p1%dd
+# hpa=\E[%i%p1%d`
+# cbt=\E[Z
+# dim=\E[2m
+# blink=\E[5m
+# It supports bold, but not underline -TD (2009-09-19)
sun-color|Sun Microsystems Workstation console with color support (IA systems),
- colors#8, pairs#64,
+ colors#8, ncv#3, pairs#64,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
- cuu=\E[%p1%dA, home=\E[H, op=\E[m\E[p, setab=\E[4%p1%dm,
+ cuu=\E[%p1%dA, home=\E[H, op=\E[0m, setab=\E[4%p1%dm,
setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
### EMX termcap.dat compatibility modes
#
-# Keypad: Home=\0G Up=\0H PrPag=\0I
-# ka1,kh kcuu1 kpp,ka3
-#
-# Left=\0K 5=\0L Right=\0M
-# kcub1 kb2 kcuf1
-#
-# End=\0O Down=\0P NxPag=\0Q
-# kc1,kend kcud1 kc3,knp
-#
-# Ins=\0R Del=\0S
-# kich1 kdch1
-#
-# On keyboard with 12 function keys,
-# shifted f-keys: F13-F24
-# control f-keys: F25-F36
-# alt f-keys: F37-F48
-# The shift/control/alt keys do not modify each other, but alt overrides both,
-# and control overrides shift.
-#
# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
# no_color_video to inform the application that standout(1), underline(2)
# reverse(4) and invisible(64) don't work with color.
emx-base|DOS special keys,
bce, bw,
it#8, ncv#71,
- bel=^G, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
- kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
- kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
- kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
- kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
- kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
- kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
- kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
- kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
- kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
- kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
- kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
- use=ansi.sys,
+ bel=^G, use=ansi.sys,
# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
# a Unix-style environment used on OS/2. (Note that the suffix makes some
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
- smul=\E[4m, tbc=\E[2g, vpa=\E[%i%p1%dd, use=vt102+enq,
+ smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
# Key definitions:
# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
- sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[1m, smul=\E[4m,
+ sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
lines#35, use=opennt,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
sgr0=\E[m,
smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
- smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
+ smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%p1%{1}%+%dd,
aaa+rv|ann arbor ambassador in reverse video,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
- tbc=\E[2g, vpa=\E[%p1%{1}%+%dd,
+ tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
avt-rv-ns|concept avt in reverse video mode/no status line,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
use=avt-ns,
dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
bce, ccc,
colors#52, ncv#53, pairs#26,
- initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X,
+ initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
scp=\036RG2%p1%02X,
dg+ccc|Configurable color info for DG D430C terminals in DG mode,
bce, ccc,
colors#52, ncv#53, pairs#26,
- initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
+ initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
sc=\E[%y,
sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
- tbc=\E[2g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
+ tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
# p9-w: Prism-9 in 132 column mode
# --------------------------------
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
rmso=\E[m, rmul=\E[m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
- sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
+ sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%p1%{1}%+%dd,
# The tek4125 emulates a vt100 incorrectly - the scrolling region
# command is ignored. The following entry replaces <csr> with the needed
mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
cols#132, use=mac,
+# nsterm*|Apple_Terminal - AppKit Terminal.app
+#
+# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
+# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
+# Server and Mac OS X operating systems. There is also a
+# "terminal.app" in GNUStep, but I believe it to be an unrelated
+# codebase and I have not attempted to describe it here.
+#
+# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
+# are pretty much on your own. Use "nsterm-7-m" and hope for the best.
+# You might also try "nsterm-7" and "nsterm-old" if you suspect your
+# version supports color.
+#
+# To determine the version of Terminal.app you're using by running:
+#
+# echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
+#
+# For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
+#
+# For Apple_Terminal v71+/v100+, use "nsterm-bce".
+#
+# For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
+#
+# For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
+#
+# For all earlier versions (Apple_Terminal), try "nsterm-7-m"
+# (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
+# might work too, but really you're on your own here since these
+# systems are very obsolete and I can't test them. I do welcome
+# patches, though :).
+
+# Other Terminals:
+#
+# For GNUstep_Terminal, you're probably best off using "linux" or
+# writing your own terminfo.
+
+# For MacTelnet, you're on your own. It's a different codebase, and
+# seems to be somewhere between "vt102", "ncsa" and "xterm-color".
+
+# For iTerm.app, see "iterm".
+
+#
# The AppKit Terminal.app descriptions all have names beginning with
# "nsterm". Note that the statusline (-s) versions use the window
# titlebar as a phony status line, and may produce warnings during
-# compilation as a result ("tsl uses 0 parameters, expected 1".) Ignore
-# these warnings, or even ignore these entries entirely. Apps which
-# need to position the cursor or do other fancy stuff inside the status
-# line won't work with these entries. They're primarily useful for
-# programs like Pine which provide simple notifications in the status
-# line. Please note that non-ASCII characters don't work right in the
-# status line, since Terminal.app incorrectly interprets their Unicode
-# codepoints as MacRoman codepoints.
+# compilation as a result ("tsl uses 0 parameters, expected 1".)
+# Ignore these warnings, or even ignore these entries entirely. Apps
+# which need to position the cursor or do other fancy stuff inside the
+# status line won't work with these entries. They're primarily useful
+# for programs like Pine which provide simple notifications in the
+# status line. Please note that non-ASCII characters don't work right
+# in the status line, since Terminal.app incorrectly interprets their
+# Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
+# versions) or only accepts status lines consisting entirely of
+# characters from the first 256 Unicode positions (including C1 but
+# not C0 or DEL.)
+#
+# The Mythology* of AppKit Terminal.app:
+#
+# In the days of NeXTSTep 0.x and 1.x there were two incompatible
+# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
+# shareware replacement for Terminal called "Stuart" which NeXT bought
+# and used as the basis for the Terminal.app in NeXTstep 2+,
+# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
+# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
+# capabilities for the early versions, but I believe that the
+# TERM_PROGRAM_VERSION may have been reset at some point.
+#
+# The early versions were tailored to the NeXT character set. Sometime
+# after the Apple aquisition the encoding was swiched to MacRoman
+# (initally with serious altcharset bugs due to incomplete conversion
+# of the old NeXT code,) and then later to UTF-8. Alos sometime during
+# or just prior to the early days of Mac OS X, the Terminal grew ANSI
+# 8-color support (initially buggy when combined with attributes, but
+# that was later fixed.) More recently, around Mac OS X version 10.3
+# or so (Terminal.app v100+) xterm-like 16-color support was added. In
+# some versions (for instance 133-1 which shipped with Mac OS X
+# version 10.4) this suffered from the <bce> bug, but that seems to
+# have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
+#
+# In the early days of Mac OS X the terminal was fairly buggy and
+# would routinely crash under load. Many of these bugs seem to have
+# been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
+# some may still remain. This change seems to correspond to
+# Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
+# it did previously.
+#
+# * This may correspond with what actually happened, but I don't
+# know. It is based on guesswork, hearsay, private correspondence,
+# my faulty memory, and the following online sources and references:
+#
+# [1] "Three Scotts and a Duane" by Simson L. Garfinkel
+# http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
+#
+# [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
+# https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
#
# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
# "nsterm" to comply with the name length and case conventions and
# export TERM
# if [ :"$TERM_PROGRAM_VERSION" = :41 ]
# then
-# TERM="nsterm"
+# TERM="nsterm-old"
# else
# TERM="nsterm-c-7"
# fi
# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
-# setenv TERM "nsterm"
+# setenv TERM "nsterm-old"
# else
# setenv TERM "nsterm-c-7"
# endif
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
- kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
- rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
+ rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
enacs=\E(B\E)0, rmacs=^O,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
smacs=^N, use=nsterm+7,
nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
acsc=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366\,\334.\377,
enacs=\E(B\E)0, rmacs=^O,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
smacs=^N, use=nsterm+7,
nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
use=nsterm+s, use=nsterm+mac,
-nsterm|Apple_Terminal|AppKit Terminal.app v41+ w/MacRoman charset (color),
+nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
use=nsterm+c41, use=nsterm+mac,
nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
use=nsterm+s, use=nsterm+c, use=nsterm+mac,
+# In Mac OS X version 10.5 the format of the preferences has changed
+# and a new, more complex technique is needed, e.g.,
+#
+# python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
+# "NSUserDefaults");ud=NSUserDefaults.alloc();
+# ud.init();prefs=ud.persistentDomainForName_(
+# "com.apple.Terminal");prefs["Window Settings"][
+# prefs["Default Window Settings"]]["TerminalType"
+# ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
+# "com.apple.Terminal")' nsterm-16color
+#
+# and it is still not settable from the preferences dialog. This is
+# tracked under rdar://problem/7365108 and rdar://problem/7365134
+# in Apple's bug reporter.
+nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
+ bw@, mir, npc,
+ civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
+ flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
+ ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
+ knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
+ smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
+ use=nsterm-c-s-acs,
+# The versions of Terminal.app in Mac OS X version 10.3.x seem to have
+# the background color erase bug. The newer version 240.2 in Mac OS X
+# version 10.5 does not.
+#
# This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
# and D P Schreber comparing to nsterm-c-s-acs.
#
-# D P Schreber notes that $TERM can be set in Terminal.app, e.g.,
-# defaults write com.apple.Terminal TermCapString nsterm-c-s-acs
+# In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
+# can be set in Terminal.app, e.g.,
+#
+# defaults write com.apple.Terminal TermCapString nsterm-bce
+#
# and that it is not set in Terminal's preferences dialog.
-nsterm-16color|AppKit Terminal.app v100.1.8 with MacOS X 10.3.9,
- kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- knp=\E[6~, kpp=\E[5~, use=nsterm-c-s-acs,
+nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
+ bce, bw, use=nsterm-16color,
+
+# This is an alias which should always point to the "current" version
+nsterm|Apple_Terminal|AppKit Terminal.app,
+ use=nsterm-16color,
+
+# iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
+# more featureful) terminal emulator for Mac OS X. It is similar
+# enough in capabilities to nsterm-16color that I have derived this
+# description from that one, but as far as I know they share no code.
+# Many of the features are user-configurable, but I attempt only to
+# describe the default configuration.
+#
+# NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
+# disabled.
+iTerm.app|iTerm.app terminal emulator for Mac OS X,
+ bce, bw@, ccc@,
+ csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color,
+ use=nsterm-16color,
# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
#
lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
smacs=\ERG, smso=\ERD,
-#### Atari ST
-#
-
-# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
-atari|atari st,
- OTbs, am,
- cols#80, it#8, lines#25,
- clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
- ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
-# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
-# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
-uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
- lines#49,
- is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
- use=vt220,
-# MiNT VT52 emulation. 80 columns, 25 rows.
-# MiNT is Now TOS, the operating system which comes with all Ataris now
-# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
-# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
-# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
-st52|Atari ST with VT52 emulation,
- am, km,
- cols#80, lines#25,
- bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
- cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
- ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
- kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
- kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
- kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
- kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
- ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
- smcup=\Ee, smso=\Ep,
-
#### Commodore Business Machines
#
# Formerly located in West Chester, PA; went spectacularly bust in 1994
# even as single processes under SunOS and the Macintosh OS.
#
+# See
+# http://www.minix3.org/manpages/man4/console.4.html
+minix|minix console (v3),
+ use=ecma+color, use=minix-1.7,
+
+# See
+# http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
# This is the entry provided with minix 1.7.4, with bogus :ri: removed.
-minix|minix console (v1.7),
+minix-1.7|minix console (v1.7),
am, xenl,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
- ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
- is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S,
- kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
- lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM,
- rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
+ home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
+ kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
+ lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
+ rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
+ smso=\E[7m, smul=\E[4m,
# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
-minix-old|minix console (v1.5),
+minix-old|minix-1.5|minix console (v1.5),
xon,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
- smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g,
+ smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
OTbs, am, eslok, hs, mir, msgr,
cols#80, it#8, lines#24,
- acsc=, bel=^G, clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB,
- cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
- cvvis=\Ex4, dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH,
- ht=^I, ind=^J, ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
- kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue,
- lf7=red, lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq,
- smacs=\EF, smir=\E@, smso=\Ep,
- tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
+ acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{, bel=^G,
+ clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
+ dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
+ ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
+ kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
+ lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
+ smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
h19-u|heathkit with underscore cursor,
cnorm@, cvvis@, use=h19-b,
h19-g|h19g|heathkit w/block cursor,
- cnorm=\Ex4, use=h19-b,
+ cnorm=\Ex4, cvvis@, use=h19-b,
alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
lines#60,
dl1=\EM, il1=\EL, use=h19,
z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
OTbs, OTpt, mir, msgr,
OTkn#10, cols#80, it#8, lines#24,
- acsc=, clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB,
- cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>,
- cuu1=\EA, cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>,
- ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H,
- kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES,
- kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
- kf9=\EOI, khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq,
- smacs=\EF, smir=\E@, smso=\Ep,
+ acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{,
+ clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
+ cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
+ home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU,
+ kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
+ khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
+ smir=\E@, smso=\Ep,
p19|h19-b with il1/dl1,
dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
# * update mlterm entry to 2.9.3 -TD
# * add mlterm+pcfkeys -TD
#
+# 2007-10-20
+# * move kLFT, kRIT, kind and kri capabilities from xterm-new to
+# xterm+pcc0, etc., to make the corresponding building blocks reflect
+# xterm's capabilities -TD
+# * add mrxvt entry -TD
+# * add xterm+r6f2, use in mlterm and mrxvt entries -TD
+#
+# 2007-11-03
+# * correct acsc strings for h19 and z100 (Benjamin Sittler)
+#
+# 2007-11-11
+# * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
+# xterm starting with patch #216 -TD
+# * make legacy xterm entries such as xterm-24 inherit from xterm-old,
+# to match xterm #230 -TD
+# * extend xterm+pccX entries to match xterm #230 -TD
+# * add xterm+app, xterm+noapp, from xterm #230 -TD
+# * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD
+#
+# 2008-04-19
+# * add screen.rxvt -TD
+#
+# 2008-04-28
+# * add screen+fkeys (prompted by Debian # 478094) -TD
+#
+# 2008-06-28
+# * add screen.mlterm -TD
+# * improve mlterm and mlterm+pcfkeys -TD
+#
+# 2008-08-23
+# * add Eterm-256color, Eterm-88color -TD
+# * add rxvt-88color -TD
+#
+# 2008-10-12
+# * add teraterm4.59 entry, use that as primary teraterm entry, rename
+# original to teraterm2.3 -TD
+# * update "gnome" to 2.22.3 -TD
+# * update "konsole" to 1.6.6 -TD
+# * add "aterm" -TD
+# * add "linux2.6.26" -TD
+#
+# 2008-11-15
+# * change several \E[2g (clear tab at current column) to \E[3g
+# (clear all tabs) to match definition for tbc capability -TD
+#
+# 2008-11-29
+# * add eterm-color -TD
+#
+# 2009-01-10
+# * add screen.Eterm -TD
+#
+# 2009-03-28
+# * correct typo in pfkey of ansi.sys-old
+# (report by Kalle Olavi Niemitalo)
+# * move function- and cursor-keys from emx-base to ansi.sys, and create
+# a pfkey capability which handles F1-F48 -TD
+#
+# 2009-05-02
+# * add vwmterm entry (Bryan Christ)
+#
+# 2009-09-19
+# * change ncv and op capabilities in sun-color to match Sun's entry for
+# this (report by Laszlo Peter)
+# * improve interix smso by using reverse rather than bold (report by
+# Kristof Zelechovski).
+#
+# 2009-10-03
+# * remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
+# * add linux-16color (Benjamin Sittler)
+# * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
+# * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
+# * add ccc and initc capabilities to xterm-16color -TD
+#
+# 2009-10-31
+# * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
+#
+# 2009-12-12
+# * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
+#
+# 2009-12-12
+# * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
+# * rename minix to minix-1.7, add minix entry for Minux3 -TD
+#
+# 2009-12-26
+# * add bterm (bogl 0.1.18) -TD
+# * minor fix to rxvt+pcfkeys -TD
+#
+# 2010-02-06
+# * update mrxvt to 0.5.4, add mrxvt-256color -TD
+#
+# 2010-02-13
+# * add several screen-bce.XXX entries -TD
+#
+# 2010-02-23
+# * modify screen-bce.XXX entries to exclude ech, since screen's color
+# model does not clear with color for that feature -TD
+#
+# 2010-03-20
+# * rename atari and st52 to atari-old, st52-old, use newer entries from
+# FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
+#
+# 2010-06-12
+# * add mlterm+256color entry -TD
+#
# The following sets edit modes for GNU EMACS.
# Local Variables:
# fill-prefix:"\t"
projects / ncurses.git / blobdiff