# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.375 $
-# $Date: 2010/10/09 19:13:51 $
+# $Revision: 1.406 $
+# $Date: 2011/12/24 22:16:12 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
use=ansi.sysk,
#### ANSI console types
-#
-#############################################################################
#
# Atari ST terminals.
# From Guido Flohr <gufl0000@stud.uni-sb.de>.
#
linux-basic|linux console,
am, bce, eo, mir, msgr, xenl, xon,
- it#8, ncv#18,
+ it#8, ncv#18, U8#1,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
# The 2.2.x kernels add a private mode that sets the cursor type; use that to
# get a block cursor for cvvis.
# reported by Frank Heckenbach <frank@g-n-u.de>.
-linux|linux console,
+linux2.2|linux 2.2.x console,
civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
cvvis=\E[?25h\E[?8c, use=linux-c-nc,
+# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
+# http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
+# Using SI/SO has the drawback that it confuses screen. SCS would work.
+# However, SCS is buggy (see comment in Debian #515609) -TD
+linux2.6|linux 2.6.x console,
+ rmacs=^O,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, use=linux2.2,
+
+# The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
+linux3.0|linux 3.0 kernels,
+ E3=\E[3;J, use=linux2.6,
+
+# This is Linux console for ncurses.
+linux|linux console,
+ use=linux3.0,
+
# Subject: linux 2.6.26 vt back_color_erase
# Changes to the Linux console driver broke bce model as reported in
# https://bugzilla.novell.com/show_bug.cgi?id=418613
# http://lkml.org/lkml/2008/4/26/305
# http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
linux2.6.26|linux console w/o bce,
- bce@, use=linux,
+ bce@, use=linux2.6,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
linux-nic|linux with ich/ich1 suppressed for non-curses programs,
qansi-w|QNX ansi for windows,
xvpa, use=qansi-m,
+#### OpenBSD consoles
+#
+# From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
+#
+# The following terminal descriptions for the AMD/Intel PC console
+# were prepared based on information contained in the OpenBSD-4.9
+# termtypes.master and wscons(4) & vga(4) manuals (2010, November).
+#
+# Added bce based on testing with tack -TD
+# Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
+# Changed kbs to DEL and removed keys that duplicate stty settings -TD
+#
+pccon+keys|OpenBSD PC keyboard keys,
+ kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
+ kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ krfr=^R,
+pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
+ acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
+ sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
+pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ enacs=\E)0$<5>, rmacs=\E(B$<5>,
+ sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
+ sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
+pccon+colors|ANSI colors for OpenBSD PC console,
+ bce,
+ colors#8, pairs#64,
+ op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+pccon+base|base capabilities for OpenBSD PC console,
+ am, km, mc5i, msgr, npc, nxon, xenl, xon,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
+ rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
+ tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
+ use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
+pccon0|OpenBSD PC console with simple ASCII pseudographics,
+ use=pccon0-m, use=pccon+colors,
+pccon-m|OpenBSD PC console without colors,
+ use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
+pccon|OpenBSD PC console,
+ use=pccon-m, use=pccon+colors,
+
#### NetBSD consoles
#
# pcvt termcap database entries (corresponding to release 3.31)
cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
use=cons25w,
+cons25-debian|freebsd console with debian backspace (25-line ansi mode),
+ kbs=\177, kdch1=\E[3~, use=cons25,
cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
colors@, pairs@,
bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
putty|PuTTY terminal emulator,
am, bce, bw, ccc, hs, mir, msgr, xenl, xon, XT,
- colors#8, it#8, ncv#22, pairs#64,
+ colors#8, it#8, ncv#22, pairs#64, U8#1,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
kf9=\EOX, use=putty,
+# Unlike xterm-sco, this leaves kmous ambiguous with kf1.
+#
+# Use modifiers to obtain function keys past 12:
+# F1-F12 - normal
+# F13-F24 - shift
+# F25-F36 - control/alt
+# F37-F48 - control/shift
+#
+putty-sco|putty with SCO function keys,
+ kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
+ kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
+ kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
+ kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
+ kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
+ kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
+ kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
+ kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
+ kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
+ kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
+ kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty,
+
# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
# (communication program) which supports:
kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
smso=\E[7m,
-#### X terminal emulators
+######## X TERMINAL EMULATORS
+#### XTERM
#
# You can add the following line to your .Xdefaults to change the terminal type
# set by the xterms you start up to my-xterm:
# This version reflects the current xterm features.
xterm-new|modern xterm terminal emulator,
npc,
- indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H,
- kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kb2=\EOE,
- kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kend=\EOF, kent=\EOM, khome=\EOH, kich1=\E[2~, kmous=\E[M,
- knp=\E[6~, kpp=\E[5~, rin=\E[%p1%dT, use=xterm+pcfkeys,
+ indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
+ rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
use=xterm-basic,
+
+# This fragment is for people who cannot agree on what the backspace key
+# should send.
+xterm+kbs|fragment for backspace key,
+ kbs=^H,
#
# This fragment describes as much of XFree86 xterm's "pc-style" function
# keys as will fit into terminfo's 60 function keys.
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
- ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H,
+ ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
+ smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs,
+ use=vt100+enq,
# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
# In retrospect, something like xterm-r6 was intended here -TD
xterm-1003|testing xterm-mouse,
XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
+# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
+# asked for some of xterm's advanced features to be added to its terminfo
+# entry. It defines extended capabilities not found in standard terminfo or
+# termcap. These are useful in tmux, for instance, hence the name.
+#
+# One caveat in adding extended capabilities in ncurses is that if the names
+# are longer than two characters, then they will not be visible through the
+# termcap interface.
+#
+# Ms modifies the selection/clipboard. Its parameters are
+# p1 = the storage unit (clipboard, selection or cut buffer)
+# p2 = the base64-encoded clipboard content.
+#
+# Ss is used to set the cursor style as described by the DECSCUSR
+# function to a block or underline.
+# Se resets the cursor style to the terminal power-on default.
+#
+# Cs and Ce set and reset the cursor colour.
+xterm+tmux|advanced xterm features used in tmux,
+ Cr=\E]112\007, Cs=\E]12;%p1%s\007,
+ Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
+
# This is another variant, for XFree86 4.0 xterm (T.Dickey)
# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
# To use it, your decTerminalID resource must be set to 200 or above.
hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
- ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
- kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
+ ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
+ kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
+ use=xterm+kbs,
xterm-hp|xterm with hpterm function keys,
kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
- home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
+ home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
+ use=xterm+kbs,
xterm-noapp|xterm with cursor keys in normal mode,
rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
xterm|xterm terminal emulator (X Window System),
use=xterm-new,
+# This entry assumes that xterm's handling of VT100 SI/SO is disabled by
+# setting the vt100Graphics resource to false.
+xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
+ U8#1, use=xterm,
+
# These entries allow access to the X titlebar and icon name as a status line.
# Note that twm (and possibly window managers descended from it such as tvtwm,
# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
# xterm with bold instead of underline
xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
smso=\E[7m, smul=\E[1m, use=xterm-old,
+
+# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
+xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
+ ich@, ich1@, use=xterm,
+# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
+xterm1|xterm terminal emulator ignoring the alternate screen buffer,
+ rmcup@, smcup@, use=xterm,
+
+#### KTERM
# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
# (kterm should not invoke DEC Graphics as the alternate character set
# -- Kenji Rikitake)
tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
kterm-color|kterm-co|kterm with ANSI colors,
ncv@, use=kterm, use=ecma+color,
-# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
-xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
- ich@, ich1@, use=xterm,
-# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
-xterm1|xterm terminal emulator ignoring the alternate screen buffer,
- rmcup@, smcup@, use=xterm,
+
+#### Other XTERM
+# These (xtermc and xtermm) are distributed with Solaris. They refer to a
+# variant of xterm which is apparently no longer supported, but are interesting
+# because they illustrate SVr4 curses mouse controls - T.Dickey
+xtermm|xterm terminal emulator (monocrome),
+ OTbs, am, km, mir, msgr, xenl,
+ btns#3, cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
+ home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
+ kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
+ kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
+ knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
+ rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
+ smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
+
+xtermc|xterm terminal emulator (color),
+ colors#8, ncv#7, pairs#64,
+ op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+ use=xtermm,
+
+# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
+# Here's a termcap entry I've been using for xterm_color, which comes
+# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
+# color stuff, I also have a status line defined as the window manager
+# title bar. [I have translated it to terminfo -- ESR]
+xterm-pcolor|xterm with color used for highlights and status line,
+ bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
+ smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
# This describes the capabilities of color_xterm, an xterm variant from
# before ECMA-64 color support was folded into the main-line xterm release.
ncv@,
op=\E[m, use=xterm-r6, use=klone+color,
+# This entry describes an xterm with Sun-style function keys enabled
+# via the X resource setting "xterm*sunFunctionKeys:true"
+# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
+# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
+# because we want it to be seen as <kcpy>.
+# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
+# with their Sun keyboard labels instead.
+# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
+xterm-sun|xterm with sunFunctionKeys true,
+ kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
+ kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
+ kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
+ kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
+ kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
+ kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
+ kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
+ kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
+ kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
+ kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
+ kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
+ use=xterm-basic,
+xterms-sun|small (80x24) xterm with sunFunctionKeys true,
+ cols#80, lines#24, use=xterm-sun,
+
+#### GNOME (VTE)
# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
gnome-rh62|Gnome terminal,
bce,
# of the keys (which more/less correspond to the termcap values), and will
# interpret those according to the $TERM value, but others not in the
# terminfo according to some constantly changing set of hacker guidelines -TD
-gnome-2007|GNOME Terminal snapshot 2.18.1,
+vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
use=xterm+pcc2, use=gnome-fc5,
+gnome-2007|GNOME Terminal snapshot 2.18.1,
+ use=vte-2007,
# GNOME Terminal 2.22.3 (2008 snapshot)
#
# vt220's behavior, which will make it less usable on a VMS system (unclear
# what the intent of the developer is, since the NRC feature exposed in vttest
# by this change does not work).
+vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
+ use=vte+pcfkeys, use=vte-2007,
gnome-2008|GNOME Terminal snapshot 2.22.3,
- use=gnome+pcfkeys, use=gnome-2007,
+ use=vte-2008,
# GNOME terminal may automatically use the contents of the "xterm" terminfo to
# supply key information which is not built into the program. With 2.22.3,
#
# The parameters with \EO (SS3) are technically an error, since SS3 should have
# no parameters. This appears to be rote copying based on xterm+pcc0.
-gnome+pcfkeys|gnome variation on xterm+pcfkeys,
+vte+pcfkeys|VTE's variation on xterm+pcfkeys,
kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
use=xterm+pcfkeys,
+gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
+ use=vte+pcfkeys,
+vte|VTE aka GNOME Terminal,
+ use=vte-2008,
gnome|GNOME Terminal,
- use=gnome-2008,
+ use=vte,
# palette is hardcoded...
+vte-256color|VTE with xterm 256-colors,
+ initc@, use=xterm+256color, use=vte,
gnome-256color|GNOME Terminal with xterm 256-colors,
- initc@, use=xterm+256color, use=gnome,
+ use=vte-256color,
# XFCE Terminal 0.2.5.4beta2
#
# Since most of the terminfo-related behavior is due to the VTE library,
# the terminfo is the same as gnome-terminal.
xfce|Xfce Terminal,
- use=gnome,
+ use=vte,
+#### Other GNOME
# Multi-Gnome-Terminal 1.6.2
#
# This does not use VTE, and does have different behavior (compare xfce and
mgt|Multi GNOME Terminal,
indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
+#### KDE
# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
# or not is debatable).
kvt|KDE terminal,
# detail, but it is unclear which copies the other.
konsole-base|KDE console window,
bce, km@, npc, XT,
+ ncv@,
bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@,
konsole-256color|KDE console window with xterm 256-colors,
initc@, use=xterm+256color, use=konsole,
+#### MLTERM
# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
#
# It is nominally a vt102 emulator, with features borrowed from rxvt and
mlterm-256color|mlterm 3.0 with xterm 256-colors,
use=xterm+256color, use=rxvt,
+#### RXVT
# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
# Notes:
rxvt-16color|xterm with 16 colors like aixterm,
ncv#32, use=ibm+16color, use=rxvt,
+#### MRXVT
# mrxvt 0.5.4
#
# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
mrxvt-256color|multitabbed rxvt with 256 colors,
use=xterm+256color, use=mrxvt,
+#### ETERM
# From: Michael Jennings <mej@valinux.com>
#
# Eterm 0.9.3
Eterm-88color|Eterm with 88 colors,
use=xterm+88color, use=Eterm,
+#### ATERM
# Based on rxvt 2.4.8, it has a few differences in key bindings
aterm|AfterStep terminal,
XT,
kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
+#### XITERM
# xiterm 0.5-5.2
# This is not based on xterm's source...
# vttest shows several problems with keyboard, cursor-movements.
km@,
kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
-# These (xtermc and xtermm) are distributed with Solaris. They refer to a
-# variant of xterm which is apparently no longer supported, but are interesting
-# because they illustrate SVr4 curses mouse controls - T.Dickey
-xtermm|xterm terminal emulator (monocrome),
- OTbs, am, km, mir, msgr, xenl,
- btns#3, cols#80, it#8, lines#24,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
- home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
- kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
- kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
- knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
- rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
- rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
- smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
-
-xtermc|xterm terminal emulator (color),
- colors#8, ncv#7, pairs#64,
- op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- use=xtermm,
-
-# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
-# Here's a termcap entry I've been using for xterm_color, which comes
-# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
-# color stuff, I also have a status line defined as the window manager
-# title bar. [I have translated it to terminfo -- ESR]
-xterm-pcolor|xterm with color used for highlights and status line,
- bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
- smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
+#### HPTERM
# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
# chars look like --esr)
initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
-# This entry describes an xterm with Sun-style function keys enabled
-# via the X resource setting "xterm*sunFunctionKeys:true"
-# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
-# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
-# because we want it to be seen as <kcpy>.
-# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
-# with their Sun keyboard labels instead.
-# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
-xterm-sun|xterm with sunFunctionKeys true,
- kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
- kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
- kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
- kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
- kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
- kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
- kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
- kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
- kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
- kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
- kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
- kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
- use=xterm-basic,
-xterms-sun|small (80x24) xterm with sunFunctionKeys true,
- cols#80, lines#24, use=xterm-sun,
-
+#### EMU
# This is for the extensible terminal emulator on the X11R6 contrib tape.
# It corresponds to emu's internal emulation:
# emu -term emu
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
+
+#### MVTERM
# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
# indicate that it emulates more than one terminal, but incompletely.
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
-### MTERM
+#### MTERM
#
# This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
#
kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
+#### SIMPLETERM
+# st.suckless.org
+# st-0.1.1
+#
+# Note: the original terminfo description uses leading blank to persuade
+# ncurses to use "st" as its name. Proper fix for that is to use "st" as an
+# alias.
+#
+# Reading the code shows it should work for aixterm 16-colors
+# - added st-16color
+#
+# Using tack:
+# - set eo (erase-overstrike)
+# - set xenl
+# - tbc doesn't work
+# - hts works
+# - cbt doesn't work
+# - shifted cursor-keys send sequences like rxvt
+# - sgr referred to unimplemented "invis" mode.
+# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
+simpleterm|st| simpleterm,
+ am, eo, mir, msgr, ul, xenl,
+ colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
+ cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
+ kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
+ rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
+ sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
+st-16color|simpleterm with 16-colors,
+ use=ibm+16color, use=simpleterm,
+# 256 colors "works", but when running xterm's test-scripts, some garbage is
+# shown in the titlebar.
+st-256color|simpleterm with 256 colors,
+ ccc@,
+ initc@, use=simpleterm, use=xterm+256color,
+
+### TERMINATOR
+# http://software.jessies.org/terminator/
+# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
+# Debian/current -TD (2011/8/20)
+#
+# There are some packaging problems:
+# a) using Java, the program starts off using 50Mb, and climbs from there,
+# up to 114Mb after testing (no scrollback).
+# b) it insists on reinstalling its terminal description in $HOME/.terminfo
+# (two copies, just in case the host happens to be Mac OS X).
+# I deleted this after testing with tack.
+#
+# Issues/features found with tack:
+# a) tbc does not work (implying that hts also is broken).
+# Comparing with the tabs utility shows a problem with the last tabstop on
+# a line.
+# b) has xterm-style shifted function-key strings
+# meta also is used, but control is ignored.
+# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
+# d) some combinations of shift/control send xterm-style sequences for
+# insert/delete/home/end.
+# e) numeric keypad sends only numbers (compare with vttest).
+# f) meta mode (km) is not implemented.
+#
+# Issues found with ncurses test-program:
+# a) bce is inconsistently implemented
+# b) widths of Unicode values above 256 do not always agree with wcwidth.
+#
+# Checked with vttest, found low degree of compatibility there.
+#
+# Checked with xterm's scripts, found that the 256-color palette is fixed.
+#
+# Fixes:
+# a) add sgr string
+# b) corrected sgr0 to reset alternate character set
+# c) modified smacs/rmacs to use SCS rather than SI/SO
+# d) removed bce
+# e) removed km
+terminator|Terminator no line wrap,
+ eo, mir, msgr, xenl, xon,
+ colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
+ cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, dsl=\E]2;\007, ed=\E[J, el=\E[K,
+ el1=\E[1K, enacs=\E(B\E)0, flash=^G, fsl=^G, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
+ ind=^J, is1=\E[?47l\E=\E[?1l,
+ is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
+ rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+ rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+ rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
+ s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
+ setaf=\E[38;5;%p1%dm,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1,
+ vpa=\E[%i%p1%dd,
+
######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
#
# tested with screen 3.09.08
screen|VT 100/ANSI X3.64 virtual terminal,
OTbs, OTpt, am, km, mir, msgr, xenl, G0,
- colors#8, cols#80, it#8, lines#24, pairs#64,
+ colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
use=screen+fkeys, use=Eterm,
screen.mrxvt|screen in mrxvt,
use=screen+fkeys, use=mrxvt,
+screen.vte|screen in any VTE-based terminal,
+ use=screen+fkeys, use=vte,
screen.gnome|screen in GNOME Terminal,
use=screen+fkeys, use=gnome,
screen.konsole|screen in KDE console window,
kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
- knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z,
- kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s,
- sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m,
- u8=\E[1t, u9=\E[11t,
+ kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
+ kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
+ rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
+ smso=\E[7m, u8=\E[1t, u9=\E[11t,
# On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
# flake out on the last line. Unfortunately, without them the terminal has no
# way to scroll.
setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- use=sun,
+ smso=\E[1m, use=sun,
#### Iris consoles
#
#### Non-Unix Consoles
#
-### EMX termcap.dat compatibility modes
+#### EMX termcap.dat compatibility modes
#
# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
# no_color_video to inform the application that standout(1), underline(2)
ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
- rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
+ rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
# :HL=^AP\r:SP=\E[i:\
-# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
+# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
altos4|alt4|altos-4|altos IV,
# backspace on all terminals. This is not so in DG mode.
# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
# grounds that there is no matching ":ml:"
-# fixed garbled ":k9=\E[00\:z:" capability -- esr)
dg460-ansi|Data General Dasher 460 in ANSI-mode,
OTbs, am, msgr, ul,
cols#80, it#8, lines#24,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
- kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
- lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
- ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
- smul=\E[4m,
+ kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
+ lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
+ mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m,
+ sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
+ u7=\E[6n, u8=\E[5n, u9=\E[0n,
# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
# Data General 605x
# Ought to work for a Model 6242, Type D210 as well as a 605x.
sb2|sb3|fixed superbee,
xsb@, use=superbee,
-#### Beehive Medical Electronics
+#### Beehive Medical Electronics
#
# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
# Regarding your question though; Beehive terminals weren't made by Harris.
sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
+# Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
+# 0 selects Tek mode, i.e., \E%!0
+# 1 selects ANSI mode
+# 2 selects ANSI edit-mode
+# 3 selects VT52 mode
+#
+# One odd thing about the description (which has been unchanged since the 90s)
+# is that the cursor addressing is using VT52 mode, and a few others use the
+# VT52's non-CSI versions of ANSI, e.g., \EJ.
tek4107|tek4109|tektronix terminals 4107 4109,
OTbs, am, mir, msgr, ul, xenl, xt,
cols#79, it#8, lines#29,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
+ rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0,
sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
# See
# http://www.minix3.org/manpages/man4/console.4.html
minix|minix console (v3),
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
+ kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
+ kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
+ kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
+ kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
+ kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
+ kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
+ kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
+ kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
+ kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
+ use=minix-3.0,
+
+minix-3.0|minix console (v3.0),
use=ecma+color, use=minix-1.7,
# See
am, use=minix-old,
pc-minix|minix console on an Intel box,
- use=klone+acs, use=minix,
+ use=klone+acs, use=minix-3.0,
# According to the Coherent 2.3 manual, the PC console is similar
# to a z19. The differences seem to be (1) 25 lines, (2) no status
######## CHANGE HISTORY
#
# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
-# Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
-# project.
+# Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
+# maintained by Eric S. Raymond as part of the ncurses project.
#
# This file contains all the capability information present in John Kunze's
# last version of the termcap master file, except as noted in the change
# * Replaced HP entries up to hpsub with purpose-built ones.
# * Blank rmir/smir/rmdc/smdc capabilities removed.
# * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
-# 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
+# 9.4.8 (Fri Apr 7 09:36:34 EDT 1995):
# * Replaced the Ann Arbor entries with SCO's, the init strings are
# more efficient (but the entries otherwise identical).
# * Added dg211 from Shuford archive.
# * add screen.rxvt -TD
#
# 2008-04-28
-# * add screen+fkeys (prompted by Debian # 478094) -TD
+# * add screen+fkeys (prompted by Debian #478094) -TD
#
# 2008-06-28
# * add screen.mlterm -TD
# * improve linux-16color entry, using "dim" for color-8 which makes it
# gray rather than black like color-0 -TD
#
-# The following sets edit modes for GNU EMACS.
-# Local Variables:
-# fill-prefix:"\t"
-# fill-column:75
-# comment-column:0
-# comment-start-skip:"^#+"
-# comment-start:"# "
-# compile-command:"tic -c terminfo.master"
-# End:
+# 2010-11-20
+# * make "vte" the principal entry defining "gnome", since GNOME terminal
+# is merely one of several terminals whose behavior is provided by this
+# library -TD
+#
+# 2010-11-27
+# * fix typo in rmso for tek4106 -Goran Weinholt
+#
+# 2010-12-11
+# * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
+# * also suppress ncv in konsole-base -TD
+#
+# 2011-02-05
+# * add U8 feature to denote entries for terminal emulators which do not
+# support VT100 SI/SO when processing UTF-8 encoding -TD
+# * add xterm-utf8 as a demo of the U8 feature -TD
+#
+# 2011-02-20
+# * add cons25-debian entry (Brian M Carlson, Debian #607662).
+#
+# 2011-06-11
+# * update minix entry to minix 3.2 (Thomas Cort).
+#
+# 2011-07-09
+# * fix inconsistent tabset path in pcmw (Todd C. Miller).
+# * remove a backslash which continued comment, obscuring altos3
+# definition with OpenBSD toolset (Nicholas Marriott).
+#
+# 2011-07-16
+# * add/use xterm+tmux chunk from xterm #271 -TD
+# * resync xterm-new entry from xterm #271 -TD
+# * add E3 extended capability to linux-basic (Miroslav Lichvar)
+# * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
+# * add SI/SO change to linux2.6 entry (Debian #515609) -TD
+#
+# 2011-07-21
+# * add kich1 to sun (Yuri Pankov)
+# * use bold rather than reverse for smso in sun-color (Yuri Pankov).
+#
+# 2011-08-06
+# * corrected k9 in dg460-ansi, add other features based on manuals -TD
+#
+# 2011-08-20
+# * minor cleanup of X-terminal emulator section -TD
+# * add terminator entry -TD
+# * add simpleterm entry -TD
+#
+# 2011-09-10
+# * add xterm+kbs fragment from xterm #272 -TD
+#
+# 2011-11-12
+# * add pccon entries for OpenBSD console (Alexei Malinin)
+#
+# 2011-12-17
+# * corrected old changelog comments -TD
+#
+# 2011-11-24
+# * add putty-sco -TD
+#
######## SHANTIH! SHANTIH! SHANTIH!
projects / ncurses.git / blobdiff