# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.616 $
-# $Date: 2017/08/18 18:33:02 $
+# $Revision: 1.675 $
+# $Date: 2018/01/27 15:14:08 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
# ANSI capabilities are broken up into pieces, so that a terminal
# implementing some ANSI subset can use many of them.
-ansi+local1,
+ansi+local1|ANSI normal-mode cursor-keys,
cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
-ansi+local,
+ansi+local|ANSI normal-mode parameterized cursor-keys,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, use=ansi+local1,
-ansi+tabs,
+ansi+tabs|ANSI tab-stops,
cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
-ansi+inittabs,
+ansi+inittabs|ANSI initial tab-stops,
it#8, use=ansi+tabs,
-ansi+erase,
+ansi+erase|ANSI clear screen/line,
clear=\E[H\E[J, ed=\E[J, el=\E[K,
-ansi+rca,
+ansi+rca|ANSI relative cursor-addressing,
hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
-ansi+cup,
+ansi+cup|ANSI absolute cursor-addressing,
cup=\E[%i%p1%d;%p2%dH, home=\E[H,
-ansi+rep,
+ansi+rep|ANSI repeat-character,
rep=%p1%c\E[%p2%{1}%-%db,
-ansi+idl1,
+ansi+idl1|ANSI insert/delete one line,
dl1=\E[M, il1=\E[L,
-ansi+idl,
+ansi+idl|ANSI insert/delete lines,
dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
-ansi+idc,
- dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E[4l,
- smir=\E[4h,
-ansi+arrows,
+ansi+idc1|ANSI insert/delete one character,
+ dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
+ansi+idc|ANSI insert/delete characters,
+ dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
+ansi+arrows|ANSI normal-mode cursor-keys,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
khome=\E[H,
-ansi+sgr|ansi graphic renditions,
+ansi+sgr|ANSI graphic renditions,
blink=\E[5m, invis=\E[8m, rev=\E[7m,
sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E[0m,
-ansi+sgrso|ansi standout only,
+ansi+sgrso|ANSI standout only,
rmso=\E[m, smso=\E[7m,
ansi+sgrul|ansi underline only,
rmul=\E[m, smul=\E[4m,
-ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
+ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
bold=\E[1m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
%;%?%p7%t8;%;m,
use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
-ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
+ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
dim=\E[2m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
%;%?%p7%t8;%;m,
use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
-ansi+csr|ansi scroll-region plus cursor save & restore,
+ansi+csr|ANSI scroll-region plus cursor save & restore,
csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
# The normal (ANSI) flavor of "media copy" building block asserts that
colors#8, ncv#3, pairs#64,
op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-ecma+italics|ECMA-48 strikeout/crossed-out,
+ecma+italics|ECMA-48 italics,
ritm=\E[23m, sitm=\E[3m,
# Attribute control for ECMA-48-compatible terminals
nsterm-256color|Terminal.app in OS X 10.8,
use=xterm+256setaf, use=nsterm-bce,
+# removed bogus kDC7 -TD
nsterm-build326|Terminal.app in OS X 10.9,
kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
- kf18=\E[32~, kDC5=\E[3;5~, kDC7=\E[3;5~, kLFT3=\Eb,
- kLFT5=\E[1;5D, kRIT3=\Ef, kRIT5=\E[1;5C,
- use=nsterm-256color,
+ kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
+ kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-256color,
# actually "343.7"
nsterm-build343|Terminal.app in OS X 10.10,
# + no support for "dynamic colors"
# + no support for tcap-query.
nsterm-build361|Terminal.app in OS X 10.11,
+ XT,
kmous=\E[M, use=nsterm-build343,
+# reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
+# Comparing with build361, little has changed, except that italics work.
+# Direct-color is not supported, by the way.
+#
+# Improved rmso/rmul -TD
+nsterm-build400|Terminal.app in OS X 10.13,
+ rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
+ use=ecma+italics, use=nsterm-build361,
+
# This is an alias which should always point to the "current" version
nsterm|Apple_Terminal|AppKit Terminal.app,
- use=nsterm-build361,
+ use=nsterm-build400,
######## iTerm, iTerm2
# According to its documentation, iTerm uses terminfo to obtain function key
# definitions. For example, if it is started with TERM=xterm, it uses key
# definitons from that terminal description from the local OSX machine. Those
-# $TERM settings may be augmented using the bookmark and profile dialogs.
+# $TERM settings may be augmented using the bookmark and profile dialogs.
# However, the behavior seen with tack does not agree with either the terminfo
# description or the function keys in its "xterm" profile.
#
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- dsl=\E]2;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
- flash=\E[?5h$<200/>\E[?5l, fsl=^G, home=\E[H,
- hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^?, kcbt=\E[Z,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?,
+ kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, tsl=\E]2;, u6=\E[%i%d;%dR, u7=\E[6n,
- u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, TS=\E]2;,
- kEND5=\E[1;5F, kHOM5=\E[1;5H, kLFT2=\E[1;2D,
- kRIT2=\E[1;2C, use=vt100+keypad, use=xterm+256setaf,
+ tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+ vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
+ use=xterm+sl-twm, use=vt100+keypad, use=xterm+x11mouse,
+ use=xterm+256setaf,
# iTerm2 3.0.15
#
# Italic text did not work initially, apparently because upgrading did not
# add/change that preference (set in Preferences, Profiles, Text). A new
# install of iTerm 3.0.15 provides italics by default (blinking text:no).
+#
+# 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5
iTerm2.app|iterm2|terminal emulator for Mac OS X,
- blink@, dim=\E[2m, ka1@, ka3@, kb2@, kc1@, kc3@, kent@,
- kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
- kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
- kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
- kf23=\E[23;2~, kf24=\E[24;2~, kDN2=\E[1;2B, kDN3=\E\E[B,
- kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B, kEND2=\E[1;2F,
+ blink@, dim=\E[2m, kEND=\E[1;2F, kHOM=\E[1;2H, ka1@, ka3@,
+ kb2@, kc1@, kc3@, kent@, kf13=\E[1;2P, kf14=\E[1;2Q,
+ kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
+ kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
+ kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
+ kind=\E[1;2B, kri=\E[1;2A,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;m%?%p9%t\016%e\017%;,
+ kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B,
kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F,
- kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM2=\E[1;2H,
- kHOM3=\E[1;9H, kHOM4=\E[1;10H, kHOM6=\E[1;6H,
- kHOM7=\E[1;13H, kHOM8=\E[1;14H, kLFT3=\E\E[D,
- kLFT4=\E[1;10D, kLFT5=\E[1;5D, kLFT6=\E[1;6D,
- kNXT3=\E\E[6~, kPRV3=\E\E[5~, kRIT3=\E\E[C,
- kRIT4=\E[1;10C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
- kUP2=\E[1;2A, kUP3=\E\E[A, kUP4=\E[1;10A, kUP5=\E[1;5A,
- kUP6=\E[1;6A, use=ecma+italics, use=iterm,
+ kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H,
+ kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H,
+ kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D,
+ kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~,
+ kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C,
+ kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A,
+ kUP5=\E[1;5A, kUP6=\E[1;6A, use=ecma+italics, use=iterm,
# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
#
# Not used here, the program recognizes escapes for italic, underline and
# dim, rendering those as green, cyan and gray respectively.
fbterm|FbTerm for Linux with framebuffer,
- colors#0x100, pairs#0x7fff,
+ colors#0x100, pairs#0x10000,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
# -- compare with cons25w
-mgterm,
+mgterm|MGL/MGL2 MobileGear Graphic Library,
OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
colors#8, cols#80, it#8, lines#18, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
#
# Several features such as backspace/delete are optional; this entry documents
# the default behavior -TD
-
+#
+# PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
+# but implements it incorrectly as mentioned here:
+# http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114
putty|PuTTY terminal emulator,
am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
colors#8, it#8, ncv#22, pairs#64, U8#1,
# "resize -s"), though it does not pass SIGWINCH to the application if the
# user resizes the window with the mouse.
teraterm2.3|Tera Term Pro,
- km, xon@,
+ km,
ncv#43, vt@,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
- flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
+ flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
kmous=\E[M, use=teraterm2.3,
+# Version 4.97
+#
+# Testing with tack:
+# - no bell (flash works)
+# - bold is yellow, blink is red.
+# - default keyboard sends ^? for Delete, can be configured for kdch1
+# - no meta mode
+# Testing with vttest:
+# + autowrap has problems...
+# + color-tests for bce feature match xterm's behavior
+# + handles most of xterm's mouse-controls other than highlight-tracking.
+# xterm's SGR 1006 works.
+# + partial support for DEC locator-events
+# + implements ECMA-48 SD/SU, but not REP, SL/SR.
+# + has a "Tek" window, but does not work with vttest's examples
+# + supports the dtterm window modify/report controls
+# + responds to DECRQM and DECRQSS controls, but not consistent with DSR
+# e.g., for VT220
+# + VT220 screen-display tests are ok
+# + no VT52 support
+# Other tests:
+# + recognizes xterm's original direct-colors sequences, but result is
+# poor.
+# + no UTF-8 apparent when UTF-8 is set, with font Lucida Control
+teraterm4.97|Tera Term Pro,
+ XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59,
+teraterm-256color|TeraTerm with xterm 256-colors,
+ use=xterm+256setaf, use=teraterm,
+
teraterm|Tera Term,
- use=teraterm4.59,
+ use=teraterm4.97,
# Tested with WinNT 4.0, the telnet application assumes the screensize is
# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
- kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
- kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
- kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
- rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
- rmul=\E[m,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[31~,
+ kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
+ kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kil1=\E[30~,
+ kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
sc=\E7,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
%;m,
sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, use=vt100+enq,
+ smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=xterm+kbs,
# Compatible with the R6 xterm
# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
# added khome/kend, hts based on the R6 xterm code - TD
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
il1=\E[L, ind=\n,
- is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
+ is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- use=vt100+enq,
+ use=xterm+kbs, use=vt100+enq,
xterm-old|antique xterm version,
use=xterm-r6,
# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=\n,
is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
- kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
- kcuu1=\EOA, kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
- kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
- kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
- kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
- kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
- kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
- memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
- rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
- rmso=\E[27m, rmul=\E[24m, rs1=^O,
- rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
+ kbeg=\EOE, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
+ kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=^O, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>,
+ sc=\E7,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
+ tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs, use=vt100+enq,
use=ecma+color, use=vt220+keypad,
# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
xterm-new|modern xterm terminal emulator,
npc,
indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
- rin=\E[%p1%dT, use=ansi+rep, use=ansi+enq,
- use=xterm+pcfkeys, use=xterm+tmux, use=ecma+strikeout,
+ rin=\E[%p1%dT, use=ansi+rep, use=ecma+strikeout,
+ use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
use=xterm-basic,
# This fragment is for people who cannot agree on what the backspace key
# compatibility reasons, they are still available as a setting of xterm's
# modifyCursorKeys resource. These fragments list the modified cursor-keys
# that might apply to xterm+pcfkeys with different values of that resource.
+#
+# These entries will have warnings when checking with tic because the kri/kind
+# capabilities duplicate the kUP/kDN extensions. This is intentional, though
+# not part of the original plan. The changes for xterm patch #206 (2005/11/3)
+# show that kri/kind were seen much later as part of a set including kLFT/kRIT:
+#
+# * modify xterm-new terminfo entry to use capabilities for shifted
+# scroll forward/reverse as shifted cursor up/down.
+#
+# In the 1980s when terminfo was defined, the developers made more of
+# a distinction between shifted up/down versus shifted left/right since most
+# terminals can index (scroll up/down), while few can scroll left/right.
xterm+pcc3|fragment with modifyCursorKeys:3,
kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
xterm+vt+edit|fragment for vt220-style editing keypad,
kfnd=\E[1~, kslt=\E[4~,
+# These variations for alternate-screen and title-stacking were introduced by
+# xterm patch #331:
+xterm+noalt|xterm without altscreen,
+ rmcup@, smcup@,
+
+xterm+alt1049|xterm 90 feature,
+ rmcup=\E[?1049l, smcup=\E[?1049h,
+
+xterm+titlestack|xterm 251 feature,
+ rmcup=\E[23;0;0t, smcup=\E[22;0;0t,
+
+xterm+alt+title|xterm 90 and 251 features combined,
+ rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t,
#
# Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
# Alternatively, the same scheme with old-style function keys as in xterm-r6
il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
- rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
- rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
- rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
+ rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
+ rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
%=%t3%e%p1%d%;m,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
- sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
- smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J,
- use=ecma+italics, use=ansi+pp, use=xterm+kbs,
- use=vt100+enq,
+ sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J, use=ecma+italics,
+ use=ansi+pp, use=xterm+kbs, use=xterm+alt+title,
+ use=ansi+enq,
# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
# In retrospect, something like xterm-r6 was intended here -TD
xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
+#### XTERM Colors
+
# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
# (T.Dickey)
#
# xterm patch #111 (1999/7/10) -TD
xterm+256color|xterm 256-color feature,
ccc,
- colors#0x100, pairs#0x7fff,
+ colors#0x100, pairs#0x10000,
initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
oc=\E]104\007,
# palette is hardcoded...
xterm+256setaf|xterm 256-color (set-only),
ccc@,
- colors#0x100, pairs#0x7fff,
- initc@,
+ colors#0x100, pairs#0x10000,
+ initc@, op=\E[39;49m,
setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
5;%p1%d%;m,
setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
rs1=\Ec\E]104\007, use=xterm+88color,
use=xterm-256color,
+# Emacs 26.1 and later support direct color mode in terminals, using a
+# combination of user-defined capabilities and ncurses-dependent function
+# calls. We will not include that here.
+#
+# Here is a first revision, which (disregarding the reuse of colors 1-7 which
+# is of interest only to the numerically illiterate), is compatible with other
+# terminal descriptions written for curses. It relies upon the extended range
+# for numeric capabilities provided in ncurses 6.1:
+xterm+direct2|xterm with direct-color indexing,
+ RGB,
+ colors#0x1000000, pairs#0x10000,
+ initc@, op=\E[39;49m,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
+ setb@, setf@,
+xterm-direct2|xterm with direct-color indexing (old),
+ use=xterm+direct2, use=xterm+titlestack, use=xterm,
+
+# That in turn had a problem: in the original patch submitted for KDE konsole
+# in 2006, the submitter and the developer alike overlooked a "color space
+# identifier" parameter. This version provides for that parameter:
+xterm+direct|xterm with direct-color indexing,
+ RGB,
+ colors#0x1000000, pairs#0x10000,
+ initc@, op=\E[39;49m,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
+ setb@, setf@,
+xterm-direct|xterm with direct-color indexing,
+ use=xterm+direct, use=xterm,
+
+# Here are corresponding flavors for terminals which could use the feature:
+iterm2-direct|iTerm2 with direct-color indexing,
+ use=xterm+direct, use=iterm2,
+mlterm-direct|mlterm with direct-color indexing,
+ use=xterm+direct, use=mlterm,
+
+# Meanwhile, in KDE #107487, the patch submitter and the developer both saw
+# that xterm's original implementation should have used colons for the
+# subparameter separators, but chose not to correct this in konsole. As of
+# late 2017, konsole still accepts only the nonstandard semicolon delimiters.
+xterm+indirect|xterm with direct-color indexing (old),
+ RGB,
+ colors#0x1000000, pairs#0x10000,
+ initc@, op=\E[39;49m,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256}
+ %/%{255}%&%d;%p1%{255}%&%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256}
+ %/%{255}%&%d;%p1%{255}%&%d%;m,
+ setb@, setf@,
+konsole-direct|konsole with direct-color indexing,
+ use=xterm+indirect, use=konsole,
+st-direct|st with direct-color indexing,
+ use=xterm+indirect, use=st,
+vte-direct|vte with direct-color indexing,
+ use=xterm+indirect, use=vte,
+
+# As for others:
+# + Apple's Terminal.app does not recognize either form of the direct-color
+# sequences.
+# + Cygwin's mintty recognizes xterm's original implementation, does okay with
+# the colors. Like vte, it is a subset of xterm, although different
+# omissions/reservations of modified-keys are seen in testing.
+# + PuTTY 0.70 seems to recognize xterm's original implementation but does
+# nothing useful with the colors.
+# + Teraterm 4.97, like PuTTY (no good).
+# + terminology 0.91 recognizes xterm's original implementation, but does
+# nothing useful with it.
+
+#### XTERM Features
+
# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
# asked for some of xterm's advanced features to be added to its terminfo
# entry. It defines extended capabilities not found in standard terminfo or
sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
- u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
- use=xterm+kbs,
+ u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c,
+ vpa=\233%i%p1%dd, use=xterm+kbs,
xterm-hp|xterm with hpterm function keys,
kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
ncv@, use=kterm, use=ecma+color,
#### Other XTERM
+
# These (xtermc and xtermm) are distributed with Solaris. They refer to a
# variant of xterm which is apparently no longer supported, but are interesting
# because they illustrate SVr4 curses mouse controls - T.Dickey
gnome-2012|GNOME Terminal 3.6.0,
use=vte-2012,
-# GNOME terminal may automatically use the contents of the "xterm" terminfo to
-# supply key information which is not built into the program. With 2.22.3,
-# this list is built into the program (which addresses the inadvertent use of
-# random terminfo data, though using a set of values which does not correspond
-# to any that xterm produces - still not solving the problem that GNOME
-# terminal hardcodes the $TERM variable as "xterm").
+# Before 2008, GNOME terminal could automatically use the contents of the
+# "xterm" terminfo to supply key information which is not built into the
+# program. With 2.22.3, this list was built into the program (which addressed
+# the inadvertent use of random terminfo data, though using a set of values
+# which did not correspond to any that xterm produced - still not solving the
+# problem that GNOME terminal hardcoded the $TERM variable as "xterm").
#
# terminfo modifier code keys
# kf13-kf24 shift 2 F1 to F12
use=vte-2012,
# relevant changes were made in January 2014, and later.
+#
+# Originally VTE was promoted as a library able to emulate any terminal by
+# reading its terminal description. In practice, that never got beyond the
+# ability to read definitions of special keys (function-, editing-, cursor).
+#
+# Before 2014, VTE had a termcap reader (originally pointing to a private copy
+# of a termcap file derived from xterm). That was incomplete because it did
+# not have any of the modifier-key information used for xterm's function-,
+# editing-, and cursor-keys. Having its own reader was unnecessary since
+# ncurses provides that information; used since xterm patch #225 in 2007.
+#
+# During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900,
+# gnome #730137) dealt with attempts to recast that termcap reader as library
+# calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c),
+# abandoning that and finally constructing a table to match xterm's default
+# behavior, e.g., for "xterm+pcfkeys".
vte-2014|VTE 0.35.1,
ncv@,
cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
ich=\E[%p1%d@, indn=\E[%p1%dS, kent=\EOM, rin=\E[%p1%dT,
- use=xterm+pcfkeys, use=vte-2012,
+ use=xterm+sm+1006, use=xterm+pcfkeys, use=vte-2012,
+
+# As of January 2018, this is the most recent release,
+# e.g., with gnome-terminal 3.26.2
+vte-2017|VTE 0.50.2,
+ use=ecma+strikeout, use=vte-2014,
vte|VTE aka GNOME Terminal,
- use=vte-2014,
+ use=vte-2017,
vte-256color|VTE with xterm 256-colors,
use=xterm+256color, use=vte,
xfce|Xfce Terminal,
use=vte-2008,
+# TERMITE
+#
+# https://github.com/thestinger/termite
+#
+# A review requires install of Arch Linux since Fedora and Debian don't have
+# this program. It uses "vte3-ng" (a conflicting package), which is here:
+# https://github.com/thestinger/vte-ng
+# which (based on the default branch setting) seems to be a fork of vte
+# 0.48.2, and is noted as such in Arch:
+# https://www.archlinux.org/packages/community/x86_64/vte3-ng/
+# It won't be merged:
+# https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10
+# https://bugzilla.gnome.org/show_bug.cgi?id=78291
+# but perhaps made obsolete.
+#
+# The entry as given was mislabeled "xterm-termite" (it is not xterm), and
+# was mostly cut/paste from xterm-256color, but since VTE does not actually
+# implement several of the features in that terminal description, this one is
+# trimmed to eliminate those. Also, since it is a slightly older version of
+# VTE, it lacks a few more features (again, trimmed).
+termite|VTE-based terminal,
+ am, ccc, km, mir, msgr, npc, xenl,
+ cols#80, it#8, lines#24, ncv@,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz{{||}}~~,
+ bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ind=\n, indn=\E[%p1%dS, invis=\E[8m,
+ is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z,
+ kent=\EOM, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM,
+ rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l,
+ rmcup=\E[?1049l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+ %t;7%;%?%p7%t;8%;m,
+ sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
+ smcup=\E[?1049h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, vpa=\E[%i%p1%dd, use=ansi+idc, use=ansi+idl,
+ use=ansi+enq, use=xterm+256color, use=ecma+color,
+ use=xterm+pcfkeys, use=xterm+sl-twm,
+
#### Other GNOME
# Multi-Gnome-Terminal 1.6.2
#
bce, km@,
kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
-# Konsole 1.0.1
+# Konsole 1.0.1 (2001/11/25)
# (formerly known as kvt)
#
# This program hardcodes $TERM to 'xterm', which is not accurate. However, to
# Updated for konsole 1.6.6:
# add control-key modifiers for function-keys, etc.
#
-# Updated for konsole 2.12.4:
+# Updated for konsole 2.3 (October 2008):
+# vttest menu 1 shows that both konsole and gnome terminal do wrapping
+# different from xterm (and vt100's). They have the same behavior in
+# this detail, but it is unclear which copies the other.
+#
+# Updated for konsole 2.12.4 (late 2013):
# add sitm/ritm
#
-# vttest menu 1 shows that both konsole and gnome terminal do wrapping
-# different from xterm (and vt100's). They have the same behavior in this
-# detail, but it is unclear which copies the other.
+# Updated for konsole 16.07 (mid 2016):
+# add dim, invis, strikeout
+# (also overline, which is too rarely used to provide as an extension)
+#
+# Updated for konsole 17.12.0 (late 2017):
konsole-base|KDE console window,
bce, km@, npc, XT,
ncv@,
- bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
+ bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, dim=\E[2m,
ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
- hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=^?, kdch1=\E[3~,
- kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
- kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
- kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
- rmso=\E[27m, rmul=\E[24m,
+ hpa=\E[%i%p1%dG, indn=\E[%p1%dS, invis=\E[8m, kbs=^?,
+ kdch1=\E[3~, kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@,
+ kf15@, kf16@, kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@,
+ kf7@, kf8@, kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT,
+ rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
- %p9%t\016%e\017%;,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
- use=ecma+italics, use=ecma+color, use=xterm-r6,
+ use=ecma+strikeout, use=ecma+italics, use=ecma+color,
+ use=xterm-r6,
+
+# The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and
+# "vt100" key-table files along with a compiled-in default key-table.
+#
+# The main difference between the two keytabs was that the developer equated
+# "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from
+# that. For the same reason, the home/end keys differ. A VT100 had none of
+# that. The otherwise identical keytabs have definitions to model the VT52
+# cursor-keys and the VT100 cursor-keys with application versus normal modes.
+#
+# An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January
+# 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were
+# dropped from the install in June 2008.
+#
+# The default keytab added in January 2000 was originally titled "X11 R6",
+# and likewise retitled to "XFree 4".
+#
+# A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab
+# and changing backspace to ^H, removing that keytab's attempt to model the
+# VT100 keypad and VT52 (KDE #20459).
+#
+# The developers made changes to the default and linux keytabs. Comparing
+# the original and 2018 versions using diffstat:
+# default: 119 added, 147 deleted, 28 unchanged
+# linux: 47 added, 28 deleted, 104 unchanged
+#
+# Most of the change for the default keytab was to make konsole act more like
+# xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749
+# (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was
+# made an external file (like "linux" and "solaris"), and some further
+# refinement made. But there are still flaws in the scheme.
+#
+# Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for
+# Shift into a placeholder in the table entries. That works well if all of the
+# modified keys are modified in the same way. But xterm does not do that. The
+# first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad
+# keys. For example, F2 sends \EOQ in both terminals because of this feature.
+# But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing:
+# kf14: '\E[1;2Q', '\EO2Q'.
+#
+# In effect, a quarter of konsole's function-keys are different from xterm.
+#
+# It is not a simple blunder:
+# a) xterm patch #121 (November 1999), providing the first version of the
+# PC-style modifiers would send \EO2Q
+# b) xterm patch #216 (July 2006) amended this and other details, provided
+# better documentation for the modifiers and made the behavior configurable,
+# e.g., using the modifyFunctionKeys resource. The reason why it sends
+# \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The
+# changelog points this out as "avoid sending SS3 with parameters".
+# c) That came after AnyMod was introduced, but still early enough that one
+# might expect konsole's developers to followup. Twelve years later that
+# has yet to happen.
+#
+# As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux",
+# "solaris").
konsole-linux|KDE console window with linux keyboard,
kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
kf8=\E[19~, kf9=\E[20~, use=konsole-base,
konsole-solaris|KDE console window with Solaris keyboard,
kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
-# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
-# than testing the code.
+
+# Obsolete: x11r5.keymap
+# KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm
+# terminfo at the time rather than testing the code.
konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
kend=\E[4~, khome=\E[1~, use=konsole-vt100,
-# The value for kbs reflects local customization rather than the settings used
-# for XFree86 xterm.
+
+# The value for kbs (see konsole-vt100) reflects local customization rather
+# than the settings used for XFree86 xterm.
konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
use=konsole-vt100,
-# Konsole does not implement shifted cursor-keys.
+
konsole+pcfkeys|konsole subset of xterm+pcfkeys,
- kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
- use=xterm+pcf0,
+ kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0,
+ use=xterm+pce2,
+
+# Obsolete: vt100.keymap
# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
-# it is still useful for deriving the other entries.
+# it is still useful for deriving the other entries, since the developer
+# provided function-keys based on xterm.
konsole-vt100|KDE console window with vt100 (sic) keyboard,
kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[H, use=konsole-base,
+
+# Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in
+# September 2008 and removed in June 2016. The developer who removed it stated
+# that it was never installed.
konsole-vt420pc|KDE console window with vt420 pc keyboard,
kbs=^H, kdch1=^?, use=konsole-vt100,
-konsole-16color|klone of xterm-16color,
- ncv#32, use=ibm+16color, use=konsole,
+
# make a default entry for konsole
konsole|KDE console window,
use=konsole-xf4x,
+# These were written for ncurses:
+konsole-16color|klone of xterm-16color,
+ ncv#32, use=ibm+16color, use=konsole,
konsole-256color|KDE console window with xterm 256-colors,
use=xterm+256setaf, use=konsole,
# Tested mlterm 3.2.2:
# mlterm 3.x has made changes, but they are not reflected in the included
-# mlterm.ti; this entry is based on testing with tack and vttest -TD
+# mlterm.ti; this entry is based on testing with ncurses, tack and vttest -TD
+# 2018/01/21: found xterm+sm+1006 did not work with version 3.3.8
mlterm3|multi lingual terminal emulator,
kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
use=ecma+italics, use=xterm+app, use=xterm+pcf0,
- use=xterm+pcc2, use=xterm+pce2, use=mlterm2,
+ use=xterm+pcc2, use=xterm+pce2, use=xterm+x11mouse,
+ use=mlterm2,
# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
#
# xiterm 0.5-5.2
# This is not based on xterm's source...
# vttest shows several problems with keyboard, cursor-movements.
-# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
+# see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
xiterm|internationalized terminal emulator for X,
km@,
kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6,
# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
# chars look like --esr)
hpterm|X-hpterm|hp X11 terminal emulator,
- am, da, db, mir, xhp,
+ am, da, db, mir, xhp, xon,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
rmul=\E&d@,
sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
- sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
- smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+ sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A,
+ smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
+ vpa=\E&a%p1%dY,
# HPUX 11 provides a color version.
hpterm-color|HP X11 terminal emulator with color,
ccc,
rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
+ sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
#### MVTERM
# apparently implements alternate screen like xterm
# does not use padding, of course.
mvterm|vv100|SwitchTerm aka mvTERM,
- am, eslok, hs, km, mir, msgr, xenl,
+ am, eslok, hs, km, mir, msgr, xenl, xon,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
rmul=\E[24m,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
- vpa=\E[%i%p1%dd,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, vpa=\E[%i%p1%dd,
# mterm normally sets $TERM to "mterm"
mterm|mouse-sun|Der Mouse term,
am, bw, mir,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
u7=\E[6n, vpa=\E[%i%p1%dd,
khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
- %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
#
mgr|Bellcore MGR (non X) window system terminal emulation,
- am, km,
+ am, km, xon,
bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
#### SIMPLETERM
# st.suckless.org
+
+st|stterm| simpleterm,
+ use=st-0.7,
+
+# Reviewed 0.7:
+# dim is intermittent, sometimes works, sometimes does not
+# italics may show up with yellow color
+# has control cursor-keys, alt cursor-keys, still no combinations
+# has control pageup/down
+st-0.7|simpleterm 0.7,
+ ccc,
+ dim=\E[2m,
+ initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
+ %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
+ kcbt@, kent@, oc=\E]104\007,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+ %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
+ Ss=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
+ kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
+ kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
+ kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
+ use=ecma+strikeout, use=st-0.6,
+
# st-0.4.1
#
# This version uses a table which supports a single modifier (a subset of
# Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
# still has no function keys past kf36 (no combinations of modifiers)
# no application keypad mode, e.g, kent.
-st|stterm| simpleterm 0.4.1,
- am, bce, hs, mir, msgr, npc, xenl, Tc, XT,
+st-0.6|simpleterm 0.6,
+ am, bce, hs, mir, msgr, npc, xenl, XT,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
zz{{||}}~~,
%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E[0m, smacs=\E(0, smcup=\E[?1049h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E]0;, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
- vpa=\E[%i%p1%dd, Se=\E[2 q, Ss=\E[%p1%d q,
+ u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+ vpa=\E[%i%p1%dd, Se=\E[2 q, Ss=\E[%p1%d q, use=xterm+sl,
use=ecma+italics,
#
# st-0.1.1
# e) removed km
terminator|Terminator no line wrap,
eo, mir, msgr, xenl, xon,
- colors#0x100, cols#80, it#8, lines#24, lm#0, pairs#0x7fff,
+ colors#0x100, cols#80, it#8, lines#24, lm#0, pairs#0x10000,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr,
# This description uses xterm+pcf0, which is misleading because the program
# does not handle combinations of modifiers - but listing them all would
# involve more effort than its developers spent -TD
-terminology|EFL-based terminal emulator,
- mc5i@, xon@,
+terminology-0.6.1|EFL-based terminal emulator,
+ mc5i@,
blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
use=xterm+256setaf,
+# Tested terminology 1.0.0
+#
+# tack -
+# Shifted cursor-keys send nothing, but xterm modifiers for control+shift
+# and control+alt were added like xterm+pcc2
+# Editing keys have some features from xterm+pce2
+# Changed from xterm+pcf0 to xterm+pcf2
+#
+# vttest -
+# REP, SL, SR fail
+#
+# Aside from the partial fixes for function/cursor/editing keys, no improvement
+# in other tests versus 0.6.1
+terminology-1.0.0|EFL-based terminal emulator,
+ civis=\E[?25l, cnorm=\E[?12l\E[?25h, dim=\E[2m,
+ flash=\E[?5h$<100/>\E[?5l, kend=\E[OF, khome=\E[OH,
+ rmacs=\E(B,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
+ %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>,
+ sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics,
+ use=xterm+x11mouse, use=xterm+pce2, use=xterm+pcf2,
+ use=xterm+pcc2, use=terminology-0.6.1,
+
+terminology|EFL-based terminal emulator,
+ use=terminology-1.0.0,
+
######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
#
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E(B\E)0, flash=\Eg, home=\E[H, ht=^I, hts=\EH,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0,
- kbs=^H, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
- kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
+ enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^H, kcbt=\E[Z,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
- S0=\E(%p1%c, use=ecma+color,
+ smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, E0=\E(B, S0=\E(%p1%c, use=ecma+color,
# The bce and status-line entries are from screen 3.9.13 (and require some
# changes to .screenrc).
screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
%t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
- E3@, use=screen+italics, use=screen+fkeys, use=xterm-new,
+ E3@, use=screen+italics, use=screen+fkeys,
+ use=xterm+x11mouse, use=xterm-new,
#:screen.xterm|screen for modern xterm,
#: use=screen.xterm-new,
# xterm-r6 does not really support khome/kend unless it is propped up by
# the translations resource.
screen.xterm-r6|screen customized for X11R6 xterm,
- bw, use=screen+fkeys, use=xterm-r6,
+ bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6,
# Color applications running in screen and TeraTerm do not play well together
# on Solaris because Sun's curses implementation gets confused.
screen.teraterm|disable ncv in teraterm,
acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- use=screen+fkeys, use=screen,
+ use=screen+fkeys, use=xterm+x11mouse, use=screen,
# Other terminals
screen.rxvt|screen in rxvt,
bw, XT,
cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
- use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
+ use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad,
+ use=screen,
screen.Eterm|screen in Eterm,
- use=screen+fkeys, use=Eterm,
+ use=xterm+x11mouse, use=screen+fkeys, use=Eterm,
screen.mrxvt|screen in mrxvt,
- use=screen+fkeys, use=mrxvt,
+ use=xterm+x11mouse, use=screen+fkeys, use=mrxvt,
screen.vte|screen in any VTE-based terminal,
- use=screen+italics, use=screen+fkeys, use=vte,
+ use=xterm+x11mouse, use=screen+italics,
+ use=screen+fkeys, use=vte,
screen.gnome|screen in GNOME Terminal,
- use=screen+italics, use=screen+fkeys, use=gnome,
+ use=xterm+x11mouse, use=screen+italics,
+ use=screen+fkeys, use=gnome,
screen.konsole|screen in KDE console window,
- use=screen+italics, use=screen+fkeys, use=konsole,
+ use=xterm+x11mouse, use=screen+italics,
+ use=screen+fkeys, use=konsole,
# fix the backspace key
screen.linux|screen in linux console,
bw,
- kbs=^?, kcbt@, use=screen+fkeys, use=screen,
+ kbs=^?, kcbt@, use=xterm+x11mouse, use=screen+fkeys,
+ use=screen,
screen.mlterm|screen in mlterm,
- use=screen+fkeys, use=mlterm,
+ use=xterm+x11mouse, use=screen+fkeys, use=mlterm,
screen.putty|screen in putty,
- use=screen+fkeys, use=putty,
+ use=xterm+x11mouse, use=screen+fkeys, use=putty,
# The default "screen" entry is reasonably portable, but not optimal for the
# most widely-used terminal emulators. The "bce" capability is supported in
#### Tmux
-# tmux is compatible with screen, but has support for italics, and some of the
-# xterm cursor bits.
+# tmux is mostly compatible with screen, but has support for italics, and some
+# of the xterm cursor bits.
+#
+# However, unlike screen, tmux has no provision for using derived terminal
+# descriptions. When screen starts, it looks for a suitable "inner" terminal
+# such as "screen.$TERM" to correspond to the outer terminal's quirks. The
+# various entries such as screen.xterm-new provide a way to more closely
+# match the terminal.
tmux|tmux terminal multiplexer,
- rmso=\E[27m, smso=\E[7m, use=ecma+italics,
+ invis=\E[8m, rmso=\E[27m,
+ sgr=\E[0%?%p6%t;1%;%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
+ \s\s\s\s\s\s\s\s\s\s\s\s5%;%?%p5%t;2%;m%?%p9%t\016%e
+ \017%;,
+ smso=\E[7m, E3=\E[3J, use=ecma+italics,
use=ecma+strikeout, use=xterm+edit, use=xterm+pcfkeys,
use=xterm+sl, use=xterm+tmux, use=screen,
use=ecma+italics,
dvtm-256color|dynamic virtual terminal manager with 256 colors,
- colors#0x100, pairs#0x7fff,
+ colors#0x100, pairs#0x10000,
setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
5;%p1%d%;m,
setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
#
# (news-29: this had :TY=ascii: --esr)
-news-29,
+news-29|SONY NEWS vt100 emulator with 29 lines,
lines#29, use=news-unk,
# (news-29-euc: this had :TY=euc: --esr)
-news-29-euc,
+news-29-euc|SONY NEWS vt100 emulator with 29 lines and EUC,
use=news-29,
# (news-29-sjis: this had :TY=sjis: --esr)
-news-29-sjis,
+news-29-sjis|SONY NEWS vt100 emulator with 29 lines and SJIS,
use=news-29,
#
# (news-33: this had :TY=ascii: --esr)
-news-33,
+news-33|SONY NEWS vt100 with 33 lines,
lines#33, use=news-unk,
# (news-33-euc: this had :TY=euc: --esr)
-news-33-euc,
+news-33-euc|SONY NEWS vt100 with 33 lines and EUC,
use=news-33,
# (news-33-sjis: this had :TY=sjis: --esr)
-news-33-sjis,
+news-33-sjis|SONY NEWS vt100 with 33 lines and SJIS,
use=news-33,
#
# (news-42: this had :TY=ascii: --esr)
-news-42,
+news-42|SONY NEWS vt100 with 42 lines,
lines#42, use=news-unk,
# (news-42-euc: this had :TY=euc: --esr)
-news-42-euc,
+news-42-euc|SONY NEWS vt100 with 42 lines and EUC,
use=news-42,
# (news-42-sjis: this had :TY=sjis: --esr)
-news-42-sjis,
+news-42-sjis|SONY NEWS vt100 with 42 lines and SJIS,
use=news-42,
#
# NEWS-OS old termcap entry
# the documentation dated from 1.9.9e) -TD
#
# For a US keyboard, with 12 function-kecbt=\E[Z, ys,
-# kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z,
+# kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z,
# kf13-kf24 use the shift-key
# kf25-kf36 use the left alt-key
# kf37-kf38 use the control-key
# kf49-kf60 use the shift- and control-keys
# The shifted cursor keys send the sequences originally used for kf61-kf64:
# down=\EF+ (kf61)
-# up=\EF- (kf62)
+# up=\EF- (kf62)
# left=\EF^ (unassigned)
-# right=\EF$ (kf64)
+# right=\EF$ (kf64)
interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
am, bce, msgr,
rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
- sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
- smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+ sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
+ smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# HP 236 console
# From: <ddavis@ic.berkeley.edu>
dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
- sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
- use=vt100+4bsd,
+ sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ tsl=\EP2~, use=vt100+4bsd,
#### Wyse (wy)
#
rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
- %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;,
sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
rmul=\EZ,
- sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|
- %t;5%;%?%p5%t;0%;m,
+ sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%|
+ %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;,
sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
tbc=\EF,
rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
rs2=\E[5;0|, sc=\E7,
- sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
+ sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smir=\E[4h,
smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
km@,
enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
rs2=\E[4;0;2;0;1;0v\E(0,
- sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1
- %p5%|%t2;%;m%?%p9%t\016%e\017%;,
+ sgr=\E[%?%p1%p5%|%t2;%;%?%p2%p6%|%t4;%;%?%p1%p3%|%p6%|%t7;%;
+ %?%p4%t5;%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
- rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
- use=vt100+4bsd,
+ rmso=\E[m, rmul=\E[m, sgr0=\E[m\017$<2>, smso=\E[7m,
+ smul=\E[4m, use=vt100+4bsd,
# except in 132 column mode, where it needs a little padding.
# This is still less padding than the vt100, and you can always turn on
# the ^S/^Q handshaking, so you can use vt100 flavors for things like
#
# AIX entries. IBM ships these with AIX 3.2.5.
# -- added rc, sc based on manpage -TD
+# -- added rmacs, smacs based on manpage -TD
# Note that we could use ibm+16color, but that is not how IBM defines this one.
aixterm|IBM Aixterm Terminal Emulator,
eslok, hs,
acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
- fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
- %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
- sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
+ fsl=\E[?F, rc=\E8, ri@, rmacs=\E(B, s0ds=\E(B, s1ds=\E(0,
+ sc=\E7,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
+ %t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[0;10m\E(B, smacs=\E(0, tsl=\E[?%p1%dT,
+ use=ibm6154,
aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
eslok, hs,
acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
- %;m,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
+ %t;8%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
eslok, hs,
bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
- %;m,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
+ %t;8%;m,
tsl=\E[?%p1%dT, use=ibm6153,
jaixterm|IBM Kanji Aixterm Terminal Eemulator,
- acsc@, use=aixterm,
+ acsc@, rmacs@,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
+ %;m,
+ sgr0=\E[m, smacs@, use=aixterm,
jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
- acsc@, use=aixterm-m,
+ acsc@, rmacs@,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
+ %;m,
+ sgr0=\E[m, smacs@, use=aixterm-m,
# This flavor is adapted from xterm, in turn from aixterm documentation -TD
aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
B\E)0\E%/0n\E[P\031$<200>,
sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
- %;m%?%p9%t\016%e\017%;$<100>,
+ sgr=%?%p9%t\016%e\017%;\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1
+ %p3%|%t;7%;%?%p4%t;5%;m$<100>,
sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
tsl=\E[>+1$<70>,
# MorphOS on Genesi Pegasos
# By Pavel Fedin <sonic_amiga@rambler.ru>
-morphos,
+morphos|MorphOS on Genesi Pegasos,
acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
yzz||}}~~,
bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
- use=screen,
+ use=xterm+x11mouse, use=screen,
screen.minitel1b|Screen specific for minitel1b,
kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n\n\n\n\n\n\n\n\n\n,
- use=screen,
+ use=xterm+x11mouse, use=screen,
screen.linux-m1b|Linux m1b specific for screen,
colors@, pairs@,
# Beginning in 2010, NetBSD curses has also provided a "-x" option for
# tic/infocmp, and uses this database (with a few changes). There are a few
# differences, noted in
-# http://invisible-island.net/ncurses/ncurses-netbsd.html
+# https://invisible-island.net/ncurses/ncurses-netbsd.html
#
# ncurses makes explicit checks for a few user-definable capabilities: AX,
# RGB, U8, XM, which are documented in the user_caps(5) manual page.
# "default".
#
# XT is harder, since screen's manpage does not give more details. For that,
-# we must read screen's source-code. When XT is set, screen assumes
+# we must read screen's source-code. For example, when XT is set, screen
+# assumes
#
# a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
# screen may also set the terminal's name, which is (for xterm) distinct
# sequence. However, because screen uses only termcap, the values returned
# by Af/Ab are not usable because they rely on expressions that termcap
# does not support. Therefore, screen uses a hardcoded string to work
-# around the limitation.
+# around the limitation. In a few cases, screen also uses tparm, which
+# is a terminfo function rather than termcap.
# f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
+# g) screen also uses the feature to decide whether to pay attention to other
+# xterm-related features which are unrelated to the description in the
+# manual page.
+#
+# Since XT is useful only when the outer terminal matches screen's assumptions,
+# it is appropriate to use it in the derived terminal descriptions such as
+# "screen.xterm", but not in the generic "screen", "screen-bce" entries.
#
# The other ISO-2022 features are rarely used, but provided here to make
# screen's termcap features available.
# 2017-08-18
# + update notes on user-defined capabilities -TD
#
+# 2017-08-26
+# + fixes for "iterm2" (report by Leonardo Brondani Schenkel) -TD
+#
+# 2017-11-11
+# + add "op" to xterm+256setaf -TD
+# + reviewed terminology 1.0.0 -TD
+# + reviewed st 0.7 -TD
+#
+# 2017-11-18
+# + modify old terminology entry and a few other terminal emulators to
+# account for xon -TD
+# + correct sgr string for tmux, which used screen's "standout" code
+# rather than the standard code (patch by Roman Kagan)
+# + correct sgr/sgr0 strings in a few other cases reported by tic, making
+# those correspond to the non-sgr settings where they differ, but
+# otherwise use ECMA-48 consistently:
+# jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b,
+# dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an,
+# st-0.7, vi603, vwmterm -TD
+#
+# 2017-12-30
+# + add xterm+noalt, xterm+titlestack, xterm+alt1049, xterm+alt+title
+# blocks from xterm #331 -TD
+# + add xterm+direct, xterm+indirect, xterm-direct entries from xterm
+# #331 -TD
+# + modify xterm+256color and xterm+256setaf to use correct number of
+# color pairs, for ncurses 6.1 -TD
+# + add rs1 capability to xterm-256color -TD
+# + modify xterm-r5, xterm-r6 and xterm-xf86-v32 to use xterm+kbs to
+# match xterm #272, reflecting packager's changes -TD
+# + remove "boolean" Se, Ss from st-0.7 -TD
+#
+# 2017-01-04
+# + add konsole-direct and st-direct -TD
+# + remove unsupported "Tc" capability from st-0.7; use st-direct if
+# direct-colors are wanted -TD
+#
+# 2017-01-17
+# + add vte-direct -TD
+# + add XT, hpa, indn, and vpa to screen, and invis, E3 to tmux (patch by
+# Pierre Carru)
+#
+# 2017-01-21
+# + use xterm+sm+1006 in xterm-new, vte-2014 -TD
+# + use xterm+x11mouse in iterm, iterm2, mlterm3 because xterm's 1006
+# mode does not work with those programs. konsole is debatable -TD
+# + add "termite" entry (report by Markus Pfeiffer) -TD
+#
+# 2017-01-27
+# + trim "XT" from screen entry -TD
+# + modify iterm to use xterm+sl-twm building block -TD
+# + mark konsole-420pc, konsole-vt100, konsole-xf3x obsolete reflecting
+# konsole's removal in 2008 -TD
+# + expanded the history section of konsole to explain its flawed
+# imitation of xterm's keyboard -TD
+# + use xterm+x11mouse in screen.* entries because screen does not yet
+# support xterm's 1006 mode -TD
+# + add nsterm-build400 for macOS 10.13 -TD
+# + add ansi+idc1, use that in ansi+idc adding dch for consistency -TD
+# + update vte to vte-2017 -TD
+# + add ecma+strikeout to vte-2017 -TD
+# + add iterm2-direct -TD
+# + updated teraterm, added teraterm-256color -TD
+# + add mlterm-direct -TD
+# + add descriptions for ANSI building-blocks -TD
+#
######## SHANTIH! SHANTIH! SHANTIH!
projects / ncurses.git / blobdiff