# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.426 $
-# $Date: 2012/02/11 23:38:27 $
+# $Revision: 1.437 $
+# $Date: 2012/04/21 19:07:11 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
dim=\E[2m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
-ansi+pp|ansi printer port,
- mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
ansi+csr|ansi scroll-region plus cursor save & restore,
csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
+# The normal (ANSI) flavor of "media copy" building block asserts that
+# characters sent to the printer do not echo on the screen. DEC terminals
+# can also be put into autoprinter mode, where each line is sent to the
+# printer as you move off that line, e.g., by a carriage return.
+ansi+pp|ansi printer port,
+ mc5i,
+ mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
+dec+pp|DEC autoprinter mode,
+ mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
+
# The IBM PC alternate character set. Plug this into any Intel console entry.
# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
# ROM graphics for control characters such as the diamond, up- and down-arrow.
# ansi-mtabs adds relative addressing and minimal tab support
ansi-mtabs|any ansi terminal with pessimistic assumptions,
it#8,
- ht=^I, use=ansi+local1, use=ansi-mini,
+ ht=^I, use=ansi-mini, use=ansi+local1,
# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
#
# http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
# Using SI/SO has the drawback that it confuses screen. SCS would work.
# However, SCS is buggy (see comment in Debian #515609) -TD
+# Further, this breaks longstanding workarounds for Linux console's line
+# drawing (see Debian 665959) -TD
linux2.6|linux 2.6.x console,
rmacs=^O,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
# This is Linux console for ncurses.
linux|linux console,
- use=linux3.0,
+ use=linux2.2,
# Subject: linux 2.6.26 vt back_color_erase
# Changes to the Linux console driver broke bce model as reported in
# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
# PF1--PF4 are used as F1--F4.
#
+# added msgr -TD
vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
- OTbs, OTpt, am, mir, xenl, xon,
+ OTbs, OTpt, am, mir, msgr, xenl, xon,
cols#80, lines#24, vt#3,
OTnl=^J,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
# designation to accommodate bug in pcvt -TD
vt220|vt200|dec vt220,
- OTbs, am, mc5i, mir, msgr, xenl, xon,
+ OTbs, am, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
- lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i,
- mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
- rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
- rmul=\E[24m, rs1=\E[?3l, sc=\E7,
+ lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
- smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
vt220-w|vt200-w|DEC vt220 in wide mode,
cols#132,
rs3=\E[?3h, use=vt220,
#
# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
+# added msgr -TD
vt200-js|vt220-js|dec vt200 series with jump scroll,
- am,
+ am, msgr,
cols#80,
bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
- kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i,
- mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m,
+ kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
rmul=\E[m,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
+ tsl=\E[1$}\E[H\E[K, use=dec+pp, use=vt220+keypad,
vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
am@,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
# (vt420: I removed <kf0>, it collided with <kf10>. I also restored
# a missing <sc> -- esr)
+# add msgr and other capabilities from vt220 -TD
vt420|DEC VT420,
- am, mir, xenl, xon,
- cols#80, lines#24, vt#3,
+ am, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
- dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
- if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
- is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
- kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
- kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
- kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
- rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
- rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<10>,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J$<50>,
+ el=\E[K$<3>, el1=\E[1K, enacs=\E)0,
+ flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
+ is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
+ kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
+ kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
+ rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
+ ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
- rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
+ rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
- sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
- smkx=\E=, smso=\E[7m, smul=\E[4m,
+ sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
+ smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ use=ansi+pp,
# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
# takes two parameters, the key and the string. Translating the key is
# assigned to an unknown key, Set-Up may be entered by pressing
# [F3] as the first key after power up, regardless of keyboard type.
# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
+# added msgr -TD
vt520|DEC VT520,
- am, mir, xenl, xon,
+ am, mir, msgr, xenl, xon,
cols#80, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
# (vt525: I added <rmam>/<smam> based on the init string;
# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
+# added msgr -TD
vt525|DEC VT525,
- am, mir, xenl, xon,
+ am, mir, msgr, xenl, xon,
cols#80, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
# The name has been changed and some aliases have been removed.
xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
- OTbs, am, bce, km, mir, msgr, xenl,
+ OTbs, am, bce, km, mir, msgr, xenl, XT,
cols#80, it#8, lines#24, ncv@,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
# xterm to use terminfo-based descriptions with the titeInhibit resource.
# -- the distribution contained incorrect khome/kend values -TD
xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
- mc5i,
blink=\E[5m, ich1@, invis=\E[8m,
is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
- mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
- rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
+ rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
+ rs2=\E[!p\E[?3;4l\E[4l\E>,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
+ smcup=\E[?1048h\E[?1047h, use=ansi+pp,
+ use=xterm-xf86-v33,
# This version was released in XFree86 4.0.
xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
#
# This chunk is used for building the VT220/Sun/PC keyboard variants.
xterm-basic|modern xterm terminal emulator - common,
- OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
+ OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
- kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
- memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
- rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
- rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
- rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8,
+ rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
+ rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
+ rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
+ rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs,
- use=vt100+enq,
+ smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=ansi+pp,
+ use=xterm+kbs, use=vt100+enq,
# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
# In retrospect, something like xterm-r6 was intended here -TD
# function to a block or underline.
# Se resets the cursor style to the terminal power-on default.
#
-# Cs and Ce set and reset the cursor colour.
+# Cs and Cr set and reset the cursor colour.
xterm+tmux|advanced xterm features used in tmux,
Cr=\E]112\007, Cs=\E]12;%p1%s\007,
Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
use=xterm,
xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
- lines#24, use=xterm-old,
+ lines#24, use=xterm,
# This is xterm for ncurses.
xterm|xterm terminal emulator (X Window System),
xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
U8#1, use=xterm,
-# These entries allow access to the X titlebar and icon name as a status line.
-# Note that twm (and possibly window managers descended from it such as tvtwm,
-# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
-# with it.
+# These building-blocks allow access to the X titlebar and icon name as a
+# status line. There are a few problems in using them in entries:
+#
+# a) tsl should have a parameter to denote the column on which to transfer to
+# the status line.
+# b) the "0" code for xterm updates both icon-title and window title. Some
+# window managers such as twm (and possibly window managers descended from
+# it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
+# don't want to mess with icon-name when using those window managers.
xterm+sl|access X title line and icon name,
hs,
wsl#40,
- dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
+ dsl=\E]0;\007, fsl=^G, tsl=\E]0;,
xterm+sl-twm|access X title line (pacify twm-descended window managers),
hs,
wsl#40,
- dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
+ dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
+
+# In contrast, this block can be used for a DEC vt320 and up. There are two
+# controls used.
+#
+# DECSASD (select active status display)
+# \E[0$} Main display
+# \E[1$} Status line
+#
+# DECSSDT (select status line type)
+# \E[0$~ No status line
+# \E[1$~ Indicator status line
+# \E[2$~ Host-writable status line
+#
+# The building block assumes that the terminal always shows something at the
+# status line (either the indicator, or status line). That is because if no
+# status line is used, then the terminal makes that line part of the user
+# window, changing its size without notice.
+#
+# Because there is no "esl" (enable status line) capability, the "tsl"
+# capability ensures that the status line is host-writable. A DEC terminal
+# will clear the status line when changing from indicator to host-writable
+# mode.
+#
+# Once on the status line, the row part of cursor addressing is ignored. Since
+# tsl expects a parameter (to specify the column), the shortest addressing that
+# can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
+#
+dec+sl|DEC VTxx status line,
+ hs,
+ dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
#
# The following xterm variants don't depend on your base version
#
# xterm with bold instead of underline
xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
- smso=\E[7m, smul=\E[1m, use=xterm-old,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
+ smso=\E[7m, smul=\E[1m, use=xterm,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
#
# bce and msgr are repaired.
gnome-rh90|GNOME Terminal,
- bce, msgr,
+ bce, msgr, XT,
hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
# shown in the titlebar.
st-256color|simpleterm with 256 colors,
ccc@,
- initc@, use=simpleterm, use=xterm+256color,
+ initc@, use=xterm+256color, use=simpleterm,
### TERMINATOR
# http://software.jessies.org/terminator/
da, db,
lm#0, pb#19200,
ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
- is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
+ is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
use=hp+labels, use=scrhp,
# This entry is for sysline. It allocates a 23 line window with
hp2622|hp2622a|hp 2622,
da, db,
lm#0, pb#19200,
- is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
+ is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
# The 2623 is a 2622 with extra graphics hardware.
hp2623|hp2623a|hp 2623,
# and mc5= should use the \E[?4i and \E[?5i strings instead).
hds200|Human Designed Systems HDS200,
- am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
+ am, bw, eslok, hs, km, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, lm#0,
acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
- mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
- rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
- rmul=\E[m\017, sc=\E7,
+ nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l,
+ rmso=\E[m\017, rmul=\E[m\017, sc=\E7,
sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
- vpa=\E[%i%p1%dd,
+ vpa=\E[%i%p1%dd, use=ansi+pp,
# <ht> through <el> included to specify padding needed in raw mode.
# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
#
prism9|p9|P9|MDC Prism-9 in ANSII mode,
- am, bw, hs, mc5i, msgr, xenl, xon,
+ am, bw, hs, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3, wsl#72,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
- prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
- ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+ khome=\E[H, nel=^M^J, prot=\E[32%{, rc=\E[%z,
+ rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m,
rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
sc=\E[%y,
sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?%p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
+ use=ansi+pp,
# p9-w: Prism-9 in 132 column mode
# --------------------------------
# This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
bq300|Bull vt320 ISO Latin 1 80 columns terminal,
- am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
+ am, eo, eslok, hs, km, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
- mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
- ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
- rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
- rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
+ nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
+ rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
+ sc=\E7,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
+ smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
bq300-rv|Bull vt320 reverse 80 columns,
flash=\E[?5l$<50>\E[?5h,
is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
# CF for civis and CO for cvvis. Finally, they define a boolean :ct:
# that flags color terminals.
#
+# Extensions added after ncurses 5.0 generally use the "-x" option of tic and
+# infocmp to manipulate user-definable capabilities. Those that are intended
+# for use in either terminfo or termcap use 2-character names. Extended
+# function keys do not use 2-character names, and are available only with
+# terminfo.
+#
+# As of mid-2012, no other terminfo/termcap implementation than ncurses
+# supports this extension; termcap libraries can as noted above make limited
+# use of the feature.
+#
+# ncurses makes explicit checks for a few user-definable capabilities: AX, U8,
+# XM.
+#
+# SCREEN Extensions:
+#
+# The screen program uses the termcap interface. It recognizes a few useful
+# nonstandard capabilities. Those are used in this file.
+#
+# AX (bool) Does understand ANSI set default fg/bg color (\E[39m /
+# \E[49m).
+# G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
+# E0 (str) Switch charset 'G0' back to standard charset.
+# S0 (str) Switch charset 'G0' to the specified charset.
+# XT (bool) Terminal understands special xterm sequences (OSC, mouse
+# tracking).
+#
+# AX is relatively straightforward; it is interpreted by ncurses to say that
+# SGR 39/49 reset the terminal's foreground and background colors to their
+# "default".
+#
+# XT is harder, since screen's manpage does not give more details. For that,
+# we must read screen's source-code. When XT is set, screen assumes
+#
+# a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
+# screen may also set the terminal's name, which is (for xterm) distinct
+# from the icon name.
+# b) OSC 20 sets the background pixmap. This is an rxvt feature.
+# c) OSC 39 and OSC 49 set the default foreground/background colors. Again
+# this is an rxvt feature.
+# d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
+# These are from xterm, although xterm accepts mouse codes that may not be
+# recognized by screen, e.g., 1005, 1006.
+# e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
+# sequence. However, because screen uses only termcap, the values returned
+# by Af/Ab are not usable because they rely on expressions that termcap
+# does not support. Therefore, screen uses a hardcoded string to work
+# around the limitation.
+# f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
+#
+# The other ISO-2022 features are rarely used, but provided here to make
+# screen's termcap features available.
+#
+# XTERM Extensions:
+#
+# Most of the xterm extensions are for function-keys. Since patch #94 (in
+# 1999), xterm has supported shift/control/alt/meta modifiers which produce
+# additional function-key strings. Some other developers copied the feature,
+# though they did not follow xterm's lead in patch #167 (in 2002), to make
+# these key definitions less ambiguous.
+#
+# A few terminals provide similar functionality (sending distinct keys when
+# a modifier is used), including rxvt.
+#
+# These are the extended keys defined in this file:
+#
+# kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
+# kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
+# kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
+# kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
+#
+# Here are the other xterm-related extensions which are used in this file:
+#
+# Cr is a string capability which resets the cursor color
+# Cs is a string capability which sets the cursor color to a given value.
+# The single string parameter is the color name/number, according to the
+# implementation.
+# Ms modifies the selection/clipboard. Its parameters are
+# p1 = the storage unit (clipboard, selection or cut buffer)
+# p2 = the base64-encoded clipboard content.
+# Se resets the cursor style to the terminal power-on default.
+# Ss is a string capability with one numeric parameter. It is used to set the
+# cursor style as described by the DECSCUSR function to a block or
+# underline.
+# XM is a string capability which overrides ncurses's built-in string which
+# enables xterm mouse mode.
+#
+# Miscellaneous extensions:
+#
+# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
+# This was implemented for the Hurd.
+# E3 clears the terminal's scrollback buffer. This was implemented in the
+# Linux 3.0 kernel as a security feature.
+# U8 is a numeric capability which denotes a terminal emulator which does not
+# support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
+# value to enable it.
+#
######## CHANGE HISTORY
#
# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
# * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
# * make sgr for cygwin, cygwinDBG agree with other caps -TD
#
+# 2012-03-31
+# * correct order of use-clauses in st-256color -TD
+#
+# 2012-04-01
+# * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
+#
+# 2012-04-14
+# * document all of the user-defined capabilities in one place -TD
+# * add XT to some places to improve usefulness for other applications
+# than screen, which would like to pretend that xterm's title is
+# a status-line. -TD
+# * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
+# of ordering and overrides -TD
+#
+# 2012-04-21
+# * add msgr to vt420, similar DEC vtXXX entries -TD
+# * add several missing vt420 capabilities from vt220 -TD
+# * factor out ansi+pp from several entries -TD
+# * change xterm+sl and xterm+sl-twm to include only the status-line
+# capabilities and not "use=xterm", making them more generally useful
+# as building-blocks -TD
+# * add dec+sl building block, as example -TD
+#
######## SHANTIH! SHANTIH! SHANTIH!