# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.573 $
-# $Date: 2016/11/13 00:17:12 $
+# $Revision: 1.598 $
+# $Date: 2017/04/01 20:40:04 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
ecma+sgr|attribute capabilities for true ECMA-48 terminals,
rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
+ecma+strikeout|ECMA-48 strikeout/crossed-out,
+ rmxx=\E[29m, smxx=\E[9m,
+
# For comparison, here are all the capabilities implied by the Intel
# Binary Compatibility Standard (level 2) that fit within terminfo.
# For more detail on this rather pathetic standard, see the comments
# nsterm*|Apple_Terminal - AppKit Terminal.app
#
-# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
+# Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
# Server and Mac OS X operating systems. There is also a
-# "terminal.app" in GNUStep, but I believe it to be an unrelated
+# "terminal.app" in GNUstep, but I believe it to be an unrelated
# codebase and I have not attempted to describe it here.
#
-# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
+# For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
# are pretty much on your own. Use "nsterm-7-m" and hope for the best.
# You might also try "nsterm-7" and "nsterm-old" if you suspect your
# version supports color.
#
# The Mythology* of AppKit Terminal.app:
#
-# In the days of NeXTSTep 0.x and 1.x there were two incompatible
+# In the days of NeXTSTEP 0.x and 1.x there were two incompatible
# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
# shareware replacement for Terminal called "Stuart" which NeXT bought
-# and used as the basis for the Terminal.app in NeXTstep 2+,
+# and used as the basis for the Terminal.app in NeXTSTEP 2+,
# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
# capabilities for the early versions, but I believe that the
# TERM_PROGRAM_VERSION may have been reset at some point.
#
# The early versions were tailored to the NeXT character set. Sometime
-# after the Apple aquisition the encoding was swiched to MacRoman
-# (initally with serious altcharset bugs due to incomplete conversion
-# of the old NeXT code,) and then later to UTF-8. Alos sometime during
+# after the Apple acquisition the encoding was switched to MacRoman
+# (initially with serious altcharset bugs due to incomplete conversion
+# of the old NeXT code,) and then later to UTF-8. Also sometime during
# or just prior to the early days of Mac OS X, the Terminal grew ANSI
# 8-color support (initially buggy when combined with attributes, but
# that was later fixed.) More recently, around Mac OS X version 10.3
# "nsterm" to comply with the name length and case conventions and
# limitations of various software packages [notably Solaris terminfo
# and UNIX.] A single Apple_Terminal alias is retained for
-# backwards-compatbility.
+# backwards-compatibility.
#
# * Added function key support (F1-F4). These only work in Terminal.app
# version 51, hopefully the capabilities won't cause problems for people
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
- el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
+ el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
linux2.6|linux 2.6.x console,
acsc=++\,\,--..00__``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwx
xyyzz{{||}c~~,
- enacs=\E(B\E)0, rmacs=^O,
+ enacs=\E)0, rmacs=^O,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, use=linux2.2,
initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
use=linux,
+# FbTerm
+# Another variant. There are two parts (src, src/lib) with the latter
+# comprising the escape-sequence parsing. The copyright notice on that
+# says it is based on GTerm by Timothy Miller.
+#
+# The original developer "dragchan" has left, but as of March 2017 there is
+# (still dead) code from May 2015 here:
+# https://github.com/izmntuk/fbterm
+#
+# The acsc string may be incorrect.
+#
+# Not used here, the program recognizes escapes for italic, underline and
+# dim, rendering those as green, cyan and gray respectively.
+fbterm|FbTerm for Linux with framebuffer,
+ colors#256, pairs#32767,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
+ \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
+ \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
+ setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, use=linux,
+
# 16-color linux console entry; this works with a 256-character
# console font but bright background colors turn into dim ones when
# you use a 512-character console font. This uses bold for bright
# foreground colors and blink for bright background colors.
linux-16color|linux console with 16 colors,
- colors#16, ncv#63, pairs#256,
+ colors#16, ncv#42, pairs#256,
setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
use=linux,
#
# F1-F12 generate different codes when shift or control modifiers are used.
# For example:
-# F1 \E[001q
+# F1 \E[001q
# shift F1 \E[013q
# control-F1 \E[025q
#
# identifies as vt200 with selective erase, but does not implement DECSCA
# no vt52 mode
# also lacks these:
-# ESC # 8 DEC Screen Alignment Test (DECALN).
-# CSI ? 5 h Reverse Video (DECSCNM).
+# ESC # 8 DEC Screen Alignment Test (DECALN).
+# CSI ? 5 h Reverse Video (DECSCNM).
#
pccon+keys|OpenBSD PC keyboard keys,
kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
cols#132, lines#50, use=arm100,
# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
-# manufactured by Sharp for the Japenese market.
+# manufactured by Sharp for the Japanese market.
# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
x68k|x68k-ite|NetBSD/x68k ITE,
cols#96, lines#32,
# Attributes do not work with color
# Failed: vpa/hpa
# Failed: kf1-kf4, kf13-kf48, khome, kend
-# (effectively xterm-r6 for function-keys)
+# (effectively xterm-r6 for function-keys)
# None of the function or cursor key-modifiers are encoded.
# Console hangs in the smm/rmm test if TERM=xterm, does not show test
#
# Testing with vttest:
# -------------------
# Identifies as vt220 with selective erase
-# (however, selective erase refers to DECSCA, SPA)
+# (however, selective erase refers to DECSCA, SPA)
# Does not implement vt52
# Uses spaces to simulate double-size characters
# Does not support 8-bit controls
# Does not support DECSCA
# Does not support any of the ISO-6429 cursor-movement
# Does not support any of the ISO-6429 miscellaneous tests
-# (SL/SR also leave unexpected char on screen too)
+# (SL/SR also leave unexpected char on screen too)
# Background does not change in menu 11.6.9 (SGR 22-27)
# None of the xterm special features tests work
netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
# | | | | | | | |
# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
# | | | 1-On | | | 1-50 Hz
-# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
+# | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
# | | 1-ANSI | | 1-8 Bits
# | Keyclick 0-Off | Parity 0-Off
# | 1-On | 1-On
#
# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
vt100|vt100-am|dec vt100 (w/advanced video),
- OTbs, am, mc5i, msgr, xenl, xon,
- cols#80, it#8, lines#24, vt#3,
+ OTbs, mc5i, xenl, xon,
+ vt#3,
+ csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
+ mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
+ rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;$<2>,
+ smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
+ use=vt100+4bsd, use=vt100+fnkeys,
+vt100+4bsd|dec vt100 from 4.0BSD,
+ am, msgr,
+ cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
- clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
- lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
- rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
- rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
+ rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
%;m%?%p9%t\016%e\017%;$<2>,
- sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
- smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
- use=vt100+fnkeys,
+ sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
+ smul=\E[4m$<2>, tbc=\E[3g,
vt100nam|vt100-nam|vt100 no automargins,
am@, xenl@,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
vt100-vb|dec vt100 (w/advanced video) & no beep,
- bel@, flash=\E[?5h\E[?5l, use=vt100,
+ bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
# Ordinary vt100 in 132 column ("wide") mode.
vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
%%G\340\202\242\E%%@%e%p1%c%;,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
- el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
- hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
- ind=^J, indn=\E[%p1%dS,
+ el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, indn=\E[%p1%dS,
initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
%02x%p4%{255}%*%{1000}%/%02x,
is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
npc,
indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
rin=\E[%p1%dT, use=ansi+enq, use=xterm+pcfkeys,
- use=xterm+tmux, use=xterm-basic,
+ use=xterm+tmux, use=ecma+strikeout, use=xterm-basic,
# This fragment is for people who cannot agree on what the backspace key
# should send.
khome=\EOH,
#
# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
-# and revised in patch #167 (2002/8/24). Some other terminal emulators copied
-# the earlier scheme, as noted in the "use=" clauses in this file.
+# and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
+# copied the earlier scheme, as noted in the "use=" clauses in this file.
#
# The original assignments from patch #94 for cursor-keys had some technical
# issues:
xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
-# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
+# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
+# (T.Dickey)
+#
# If configured to support 88- or 256-colors (which is fairly common in 2009),
# xterm also recognizes the control sequences for initc -TD
xterm-16color|xterm with 16 colors like aixterm,
use=xterm-new,
# 256-colors is a compile-time feature of XFree86 xterm beginning with
-# patch #111 (1999/7/10) -TD
+# xterm patch #111 (1999/7/10) -TD
xterm+256color|xterm 256-color feature,
ccc,
colors#256, pairs#32767,
setb@, setf@,
# 88-colors is a compile-time feature of XFree86 xterm beginning with
-# patch #115 (1999/9/18) -TD
+# xterm patch #115 (1999/9/18) -TD
#
# Note that the escape sequences used are the same as for 256-colors - xterm
# has a different table of default color resource values. If built for
xterm-pcolor|xterm with color used for highlights and status line,
wsl#40,
bold=\E[1;43m, rev=\E[7;34m,
- sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
- %t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
+ sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
+ %t;7;31%;%?%p3%t;7;34%;m,
smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
# This describes the capabilities of color_xterm, an xterm variant from
# GNOME terminal may automatically use the contents of the "xterm" terminfo to
# supply key information which is not built into the program. With 2.22.3,
-# this list is built into the program (which addresses the inadvertant use of
+# this list is built into the program (which addresses the inadvertent use of
# random terminfo data, though using a set of values which does not correspond
# to any that xterm produces - still not solving the problem that GNOME
# terminal hardcodes the $TERM variable as "xterm").
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
- hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
- ind=^J, is1=\E[?47l\E=\E[?1l,
+ enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=^J, is1=\E[?47l\E=\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
# dates, nor give developer's names. Initial color support was added for rxvt
# "2.0", which was sometime in 1994.
#
-# rxvt had usable color support with 2.16 (April 2, 1996), with some help by my work on
-# vttest, as well as bug reports to Mark Olesen. For instance, the fix
+# rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
+# work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
# mentioned here
# http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
# was from one of my bug-reports -TD
# Reviewed st 0.5:
# implements control-modifier, but not control-shift for special keys
# implements alt-modifier, but not alt-shift for special keys
+#
+# Reviewed st 0.6:
+# http://git.suckless.org/st/log/st.info
+# Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
+# still has no function keys past kf36 (no combinations of modifiers)
+# no application keypad mode, e.g, kent.
st|stterm| simpleterm 0.4.1,
- am, bce, eo, hs, mir, msgr, xenl,
- colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ am, bce, hs, mir, msgr, npc, xenl, Tc, XT,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
+ zz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E)0, flash=\E[?5h\E[?5l, fsl=^G, home=\E[H,
+ enacs=\E)0, flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
- is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, kEND=\E[1;2F,
- kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
- kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, ka3=\E[5~, kb2=\EOu,
- kbs=\177, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, kclr=\E[3;5~,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F,
- kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R,
- kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
- kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
- kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
- kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
- kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
- kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
- kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
- kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
- kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
- kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
- kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
- kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
+ invis=\E[8m, is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~,
+ kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D,
+ kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~,
+ ka3=\E[5~, kb2=\EOu, kbs=\177, kc1=\E[4~, kc3=\E[6~,
+ kcbt=\E[Z, kclr=\E[3;5~, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[3;2~,
+ ked=\E[1;5F, kel=\E[1;2F, kend=\E[4~, kent=\EOM, kf1=\EOP,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P,
+ kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~,
+ kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~,
+ kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
+ kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R,
+ kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~,
+ kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
+ kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~,
+ kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R, kf4=\EOS,
+ kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
+ kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
+ kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
+ kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
+ kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
- kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, op=\E[39;49m,
- rc=\E8, rev=\E[7m, ri=\EM, ritm=\E[23m, rmacs=\E(B,
- rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
- rmul=\E[m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, mc4=\E[4i,
+ mc5=\E[5i, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ ritm=\E[23m, rmacs=\E(B, rmcup=\E[?1049l, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
+ rs2=\E[4l\E>\E[?1034l, sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
%=%t3%e%p1%d%;m,
sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
- %t;7%;%?%p4%t;5%;m,
+ %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E[0m, sitm=\E[3m, smacs=\E(0, smcup=\E[?1049h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E]0;, u6=\E[%i%d;%dR, u7=\E[6n,
- u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd,
+ u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, Se=\E[2 q,
+ Ss=\E[%p1%d q,
#
# st-0.1.1
#
# terminal wants to use TERM=stterm-256color, but that is longer than 14
# characters, making the choice nonportable.
st-256color|stterm-256color|simpleterm with 256 colors,
- use=xterm+256color, use=st,
+ ccc@,
+ initc@, oc@, use=xterm+256color, use=st,
#### TERMINATOR
# https://code.google.com/p/jessies/
# a line.
# b) has xterm-style shifted function-key strings
# meta also is used, but control is ignored.
-# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
+# c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
+# meta)
# d) some combinations of shift/control send xterm-style sequences for
# insert/delete/home/end.
# e) numeric keypad sends only numbers (compare with vttest).
#### Emacs
+# https://www.emacswiki.org/emacs/AnsiTerm
+# https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
+#
# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
eterm|gnu emacs term.el terminal emulation,
am, mir, xenl,
sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
u6=\E[%i%d;%dR, u7=\E[6n,
+# shell.el can "do" color, though not nearly as well.
+#
+# seen here:
+# http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
+#
+# and
+# https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
+# https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
+# https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
+#
+# however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
+# frequently. The contemporaneous term.el aka ansi-term does not "support"
+# italics but does not lose the color information -TD 2017/01/28.
+dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
+ am, hc,
+ colors#8, it#8, ncv#13, pairs#64,
+ bold=\E[1m, cud1=^J, ht=^I, ind=^J, op=\E[39;49m,
+ ritm=\E[23m, rmul=\E[24m, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm, sgr0=\E[m, sitm=\E[3m, smul=\E[4m,
+
#### Screen
# Entries for use by the `screen' program by Juergen Weigert,
sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
smul=\E[4m, tbc=\E[3g,
+#### Tmux
+
# tmux is compatible with screen, but has support for italics, and some of the
# xterm cursor bits.
tmux|tmux terminal multiplexer,
- ritm=\E[23m, rmso=\E[27m, sitm=\E[3m, smso=\E[7m, Ms@,
+ ritm=\E[23m, rmso=\E[27m, sitm=\E[3m, smso=\E[7m,
+ use=ecma+strikeout, use=xterm+edit, use=xterm+pcfkeys,
use=xterm+sl, use=xterm+tmux, use=screen,
tmux-256color|tmux with 256 colors,
use=xterm+256setaf, use=tmux,
+#### Dvtm
+
+# dvtwm 0.15
+# http://www.brain-dump.org/projects/dvtm/
+#
+# + This uses ncurses to manage the display, including support for italics and
+# default-colors.
+# + However, default-colors are incomplete: do not set bce.
+# + It does not implement flash (since no \e[?5h)
+# + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
+# Oddly enough, if $TERM contains "linux", it attempts to set the title.
+# + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
+# + The built-in table of function-keys (based on rxvt) is incomplete (ends
+# with kf22).
+# + It also omits the shifted cursor- and editing-keypad keys.
+# However, it is confused by xterm's shifted cursor- and editing-keypad keys
+# (and passes those through without interpretation)
+# and may simply pass-through rxvt's, making it appear to work.
+# In other cases such as kf23 and up, no pass-through is done.
+# + Most of the mode-settings in the initialization/reset strings are not
+# implemented; dvtm copies its description from rxvt.
+dvtm|dynamic virtual terminal manager,
+ am, eo, mir, msgr, xenl, AX,
+ colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ is1=\E[?47l\E=\E[?1l,
+ is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
+ kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
+ kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
+ kb2=\EOu, kbs=\177, kc1=\EOq, kc3=\EOs, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kel=\E[8\^, kend=\E[8~, kent=\EOM, kf0=\E[21~,
+ kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
+ kf20=\E[34~, kf21=\E[23$, kf22=\E[24$, kf3=\E[13~,
+ kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~,
+ kind=\E[a, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[b,
+ kslt=\E[4~, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ ritm=\E[23m, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m,
+ rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+ rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
+ 25h,
+ s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
+ %p9%t\016%e\017%;,
+ sgr0=\E[m\017, sitm=\E[3m, smacs=^N, smcup=\E7\E[?47h,
+ smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd,
+
+dvtm-256color|dynamic virtual terminal manager with 256 colors,
+ colors#256, pairs#32767,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
+ 5;%p1%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
+ ;%p1%d%;m,
+ use=dvtm,
+
#### NCSA Telnet
# Francesco Potorti <F.Potorti@cnuce.cnr.it>:
#
# Other special mappings:
# Apple VT220
-# HELP Find
+# HELP Find
# HOME Insert here
# PAGEUP Remove
# DEL Select
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l,
- home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
- ind=\n$<150*>,
+ el=\E[K, el1=\E[1K, enacs=\E)0,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
+ il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
- dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
- home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
- kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
- rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
- rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
- smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
- u9=\E[c, use=emx-base,
+ dch=\E[%p1%dp, ed=\E[J, el=\E[K,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[@, ind=^J, kb2=\E[G, kbs=^H, kf0=\0D,
+ kll=\0O, kspd=^Z, nel=^M^J, rev=\E[5;37;41m, rmir=\E[4l,
+ rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
+ rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
+ smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
+ tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=emx-base,
# nice colors for Emacs (white on blue, mode line white on cyan)
ansi-color-2-emx|ANSI.SYS color 2,
clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
# kPRV [shifted prev key] not implemented
# khome [home key] really is \E[1~ NOT \E[H
# tbc [clear tab stops] not implemented
-# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
+# xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
# smpch [Start PC charset] is \E[11m, same as smacs
# rmpch [End PC charset] is \E[10m, same as rmacs
# mir [move in insert mode] fails in tack?
# From: Federico Bianchi
# This is the entry for the OpenNT terminal.
-# The ntconsole name is for backward compatability.
+# The ntconsole name is for backward compatibility.
# This is for OpenNT 2.0 and later.
# Later OpenNT was renamed to Interix.
#
# NOT set up by the initialization strings.
#
# Port Configuration
-# RecvPace=Xon/Xoff
-# XmitPace=Xon/Xoff
-# StripNulDel=Yes
+# RecvPace=Xon/Xoff
+# XmitPace=Xon/Xoff
+# StripNulDel=Yes
#
# Terminal Configuration
-# InhHndShk=Yes
-# InhDC2=Yes
-# XmitFnctn(A)=No
-# InhEolWrp=No
+# InhHndShk=Yes
+# InhDC2=Yes
+# XmitFnctn(A)=No
+# InhEolWrp=No
#
# Note: the 2624 DOES have a true <home>, believe it or not!
#
# PC Character Set YES
# Twenty-Five Line Mode YES
# XON/XOFF @128 or 64 (sc)
-# Keycode Mode NO or YES (sc)
+# Keycode Mode NO or YES (sc)
# Backspace Key BS or BS/DEL
#
-# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
+# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
# \E\\? does not turn off keycode mode
# <smsc> sets alternate start/stop; keycode on
hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
# but has no padding added, so may allow runover in some terminals at high
# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
# hp98x5 terminal emulators or hp98x6 consoles.
-# Adds xy-cursor addressing, vertical cursor addressing, home,
+# Adds xy-cursor addressing, vertical cursor addressing, home,
# last line, and underline capabilities.
#
# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
# moved <rmir> here from hpsub -- esr)
-hpex|hp extended capabilites,
+hpex|hp extended capabilities,
cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
# on off off Busy active on J5-19, CD disabled - Factory Set.
# on off on Busy active on J5-19, CD enabled
#
-# sw4 Used in conjuction with S4 for comm interface control - Fact 0
+# sw4 Used in conjunction with S4 for comm interface control - Fact 0
#
# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
#
OTbs, OTpt,
OTkn#4,
if=/usr/share/tabset/vt100,
- is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100,
+ is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
# (adm42: removed obsolete ":ma=^K^P:" -- esr)
adm42|lsi adm42,
OTbs, am,
# (including some with magic cookies), fancy half-duplex mode, and
# different bugs.
#
-# Some operations reqire truly incredible amounts of padding. The
+# Some operations require truly incredible amounts of padding. The
# insert_line (<il1>) and delete_line (<dl1>) operations in particular
# are so slow as to be nearly unusable.
#
# 10: 110
#
# S2 UART/Terminal options:
-# Up Down
+# Up Down
# 1: Not used Not allowed
# 2: Alternate character set Standard character set
# 3: Full duplex Half duplex
# 8: Not used Not allowed on Rev E or lower
# 9: Even parity Odd parity
# 10: Steady cursor Blinking cursor
-# (On Rev E or lower, use W25 instead of switch 10.)
+# (On Rev E or lower, use W25 instead of switch 10.)
#
# S5 UART/Terminal options:
-# Open Closed
+# Open Closed
# 1: P3-6 Not connected DSR received on P3-6
# 2: P3-8 Not connected DCD received on P3-8
#
# 3 Closed, 4 Closed: Not allowed
#
# 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
-# all data transmitted out of the modem port (P3) will also be
-# transmitted out of the printer port (P4).
+# all data transmitted out of the modem port (P3) will also be
+# transmitted out of the printer port (P4).
#
# 6 Open, 7 Open: Not allowed
# 6 Open, 7 Closed: 20ma current loop input
# is switched on).
#
# S4/W31: Enables automatic LF upon receipt of CR from
-# remote or keyboard.
+# remote or keyboard.
# S4/W32: Enables transmission of EOT at the end of Send. If not
-# installed, a carriage return is sent.
+# installed, a carriage return is sent.
# S4/W33: Disables automatic carriage return in column 80.
# S4/W34: Selects Page Print Mode as initial condition. If not
-# installed, Extension Mode is selected.
+# installed, Extension Mode is selected.
#
# NON-STANDARD CAPABILITIES
#
# Position Up Dn Description
# --------------------------------------------
# 1 X Local edit
-# X Duplex edit (transmit editing keys)
+# X Duplex edit (transmit editing keys)
# --------------------------------------------
# 2 X 912/920 emulation
-# X 925
+# X 925
# --------------------------------------------
# 3 X
# 4 X No parity
# 5 X
# --------------------------------------------
# 6 X White on black display
-# X Black on white display
+# X Black on white display
# --------------------------------------------
# 7 X Half Duplex
# 8 X
# 8 X
# --------------------------------------------
# 9 X 50 Hz
-# X 60 Hz
+# X 60 Hz
# --------------------------------------------
# 10 X CR/LF (Auto LF)
-# X CR only
+# X CR only
#
# S3 (internal switch) settings:
#
# Position Up Dn Description
# --------------------------------------------
# 1 X Keyclick off
-# X Keyclick on
+# X Keyclick on
# --------------------------------------------
# 2 X English
# 3 X
# 5 X
# --------------------------------------------
# 6 X Screen blanking timer (ON)
-# X Screen blanking timer (OFF)
+# X Screen blanking timer (OFF)
# --------------------------------------------
# 7 X Page attributes
-# X Line attributes
+# X Line attributes
# --------------------------------------------
# 8 X DCD disconnected
-# X DCD connected
+# X DCD connected
# --------------------------------------------
# 9 X DSR disconnected
-# X DSR connected
+# X DSR connected
# --------------------------------------------
# 10 X DTR Disconnected
-# X DTR connected
+# X DTR connected
# --------------------------------------------
#
# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
- use=vt100,
+ use=vt100+4bsd,
#### Wyse (wy)
#
dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
- enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
+ enacs=\E)0, flash=\E[30h\E\,$<250/>\E[30l, fsl=^A,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
ind=\n$<2>, ip=$<1>,
dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
- enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
+ enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
#
# Wyse 85 with visual bell.
wy85-vb|wyse85-vb|wyse 85 with visible bell,
- bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
+ bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
#
# Wyse 85 in 132-column mode.
wy85-w|wyse85-w|wyse 85 in 132-column mode,
cols#132, wsl#132,
- rs2=\E[35h\E[?3h$<70>, use=wy85,
+ rs2=\E[35h$<70/>\E[?3h, use=wy85,
#
# Wyse 85 in 132-column mode with visual bell.
wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
# terminfo. At one point, I found some reference indicating that this
# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
# me), but I can't find that and the server under my bookmark to "Wyse
-# Technical" isn't responding. So there's the question of wether the wy85
-# terminfo should reflect the manufactuer's intended behaviour of the terminal
+# Technical" isn't responding. So there's the question of whether the wy85
+# terminfo should reflect the manufacturer's intended behaviour of the terminal
# or the actual."
wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
am, hs, mc5i, mir, msgr, xenl, xon,
dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
- enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
+ enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
el=\E[K, el1=\E[1K, enacs=\E)0,
- flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
+ flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
- flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
+ flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
ind=\n$<2>,
#
# Wyse 370 in 132-column mode with visual bell.
wy370-wvb|Wyse 370 with visible bell 132-columns,
- flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
+ flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
wy370-rv|Wyse 370 reverse video,
rs3=\E[32h\E[?5h, use=wy370,
#
#
# Wyse 520 with visual bell.
wy520-vb|wyse520-vb|wyse 520 with visible bell,
- flash=\E[30h\E\,\E[30l$<100>, use=wy520,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
#
# Wyse 520 in 132-column mode.
wy520-w|wyse520-w|wyse 520 in 132-column mode,
#
# Wyse 520 in 132-column mode with visual bell.
wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
- flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
#
#
# Wyse 520 emulating a vt420 7 bit mode.
#
# Wyse 520 with visual bell.
wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
- flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
#
# Wyse 520 in 132-column mode.
wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
#
# Wyse 520 in 132-column mode with visual bell.
wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
- flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
#
# Wyse 520 in 80-column, 36 lines
wy520-36|wyse520-36|wyse 520 with 36 data lines,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
- flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
+ flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
+ ?5l,
fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
- flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
+ flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
+ ind=\ED,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
# These entries attempt to describe Avatar, a terminal emulation used with
# MS-DOS bulletin-board systems. It was designed to give ANSI-like
# capabilities, but with cheaper (shorter) control sequences. Messy design,
-# excessively dependent on PC idiosyncracies, but apparently rather popular
+# excessively dependent on PC idiosyncrasies, but apparently rather popular
# in the BBS world.
#
# No color support. Avatar doesn't fit either of the Tektronix or HP color
# (^V^L and ^V^M set the current attribute as a side-effect.)
# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
# in the pattern, <c> the number of times the pattern
-# should be repeated. If either value is 0, no-op.
+# should be repeated. If either value is 0, no-op.
# The pattern can contain Avatar console codes,
# including other ^V ^Y patterns.
# level 1:
# ^V^Q%c -- query the driver
# ^V^R -- driver reset
# ^V^S -- Sound tone (PC-specific)
-# ^V^T -- change highlight at current cursor poition to %c
+# ^V^T -- change highlight at current cursor position to %c
# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
# -- define window
# Seems upward compatible with vt100, plus ins/del line/char.
# On sgr, the protection parameter is ignored.
# No check is made to make sure that only 3 parameters are output.
-# standout= reverse + half-intensity = 3 | 5.
-# bold= reverse + underline = 2 | 3.
+# standout= reverse + half-intensity = 3 | 5.
+# bold= reverse + underline = 2 | 3.
# note that half-bright blinking doesn't look different from normal blinking.
# NOTE:you must program the function keys first, label second!
# (att4410: a BSD entry has been seen with the following capabilities:
# asynchronous keyboard-display terminal. It supports
# the vi editor. The terminal must be set up as follows,
#
-# HIGHLIGHT DEFINITION 3-TONE
-# DISPLAY FUNCTION GROUP III
+# HIGHLIGHT DEFINITION 3-TONE
+# DISPLAY FUNCTION GROUP III
#
# The second entry below provides limited (a la adm3a)
# operation under GROUP II.
#
# This must be used with DISPLAY FUNCTION GROUP I or III
-# and HIGHLIGHT DEFINITION 3-TONE
+# and HIGHLIGHT DEFINITION 3-TONE
# The terminal has either bold or blink, depending on options
#
# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
#
# Here is what's going onm in the init string:
# ESC [ 50;4| set 700 native mode (really is 605)
-# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
+# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
# ESC [ 53;0| set GenFlow to Xon/Xoff
# ESC [ 8 ;0| set CR on NL
# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
# Briefly, the settings are for the following modes:
# (values are for bit set/clear with * indicating our preference
# and the value used to test these termcaps)
-# Note that many of these settings are irrelevent to the terminfo
+# Note that many of these settings are irrelevant to the terminfo
# and are just set to the default mode of the terminal as shipped
# by the factory.
#
# Cursor forward FF
# Cursor home RS
# Cursor up VT
-# Cursor supress ETB
+# Cursor suppress ETB
# Cursor enable CAN
# Erase to end of line ESC,T
# Erase to end of page ESC,Y
# tset or setterm etc.) provided that the terminal has been manually set
# up (and the setup saved with ^S) to be compatible with this termcap. To be
# compatible it should be in ANSI mode (not VT52). A set-up that
-# works is to set all the manually setable stuff to factory defaults
-# by pressing ^D in set-up mode. Then increse the brighness with the
+# works is to set all the manually settable stuff to factory defaults
+# by pressing ^D in set-up mode. Then increase the brightness with the
# up-arrow key since the factory default will likely be dim on an old
# terminal. Then change any options you want (provided that they are
# compatible with the termcap). For my terminal I set: Screen
clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
kcuu1=^W, khome=^Y,
-cdc721ll|CDC Vikingll,
+cdc721ll|CDC Viking with long lines,
OTbs, am,
cols#132, lines#24,
clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
- hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
+ dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
# Lots of notes, originally inline, but ncurses doesn't grok that.
#
-# am: not available in power on mode, but turned on with \E[=107;207h in
+# am: not available in power on mode, but turned on with \E[=107;207h in
# is2=. Also, \E=124l in is2= could have been used to prevent needing
# to specify xenl:, but that would have rendered the last space on the
# last line useless.
# there is no way of knowing what it is that the program wants turned
# off.
# smul: The "underline" attribute is reconfigurable to an overline or
-# strikethru, or (as done with \E[;3+} in is2=), to a line at the true
+# strike-through, or (as done with \E[;3+} in is2=), to a line at the true
# bottom of the character cell. This was done to allow for more readable
# underlined characters, and to be able to distinguish between an
# underlined space, an underscore, and an underlined underscore.
# %p1%{30}%> ((key; 30) >;
# %p1%{54}%< (key; 54) <
# %A ) AND
-# %O ) OR
+# %O ) OR
# [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
# %t\E[ THEN OUTPUT \E[
# %p1%d OUTPUT (key) as decimal
# It's not made clear in the manuals, but based on other ansi/vt type
# terminals, it's a good guess that this terminal is capable of both
# "transparent print" (which doesn't copy data to the screen, and
-# therefore needs mc5i: specified to say so) and "auxilliary print"
+# therefore needs mc5i: specified to say so) and "auxiliary print"
# (which does duplicate printed data on the screen, in which case mc4=
# and mc5= should use the \E[?4i and \E[?5i strings instead).
use=dm3025,
# Datamedia DT80 soft switches:
# 1 0=Jump 1=Smooth
-# Autorepeat 0=off 1=on
-# Screen 0=Dark 1=light
-# Cursor 0=u/l 1=block
+# Autorepeat 0=off 1=on
+# Screen 0=Dark 1=light
+# Cursor 0=u/l 1=block
#
# 2 Margin Bell 0=off 1=on
-# Keyclick 0=off 1=on
-# Ansi/VT52 0=VT52 1=Ansi
-# Xon/Xoff 0=Off 1=On
+# Keyclick 0=off 1=on
+# ANSI/VT52 0=VT52 1=ANSI
+# Xon/Xoff 0=Off 1=On
#
# 3 Shift3 0=Hash 1=UK Pound
-# Wrap 0=Off 1=On
-# Newline 0=Off 1=On
-# Interlace 0=Off 1=On
+# Wrap 0=Off 1=On
+# Newline 0=Off 1=On
+# Interlace 0=Off 1=On
#
# 4 Parity 0=Odd 1=Even
-# Parity 0=Off 1=On
-# Bits/Char 0=7 1=8
-# Power 0=60Hz 1=50Hz
+# Parity 0=Off 1=On
+# Bits/Char 0=7 1=8
+# Power 0=60Hz 1=50Hz
#
# 5 Line Interface 0=EIA 1=Loop
-# Aux Interface 0=EIA 1=Loop
-# Local Copy 0=Off 1=On
-# Spare
+# Aux Interface 0=EIA 1=Loop
+# Local Copy 0=Off 1=On
+# Spare
#
# 6 Aux Parity 0=Odd 1=Even
-# Aux Parity 0=Off 1=On
-# Aux Bits/Char 0=7 1=8
-# CRT Saver 0=Off 1=On
+# Aux Parity 0=Off 1=On
+# Aux Bits/Char 0=7 1=8
+# CRT Saver 0=Off 1=On
# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
dm80|dmdt80|dt80|datamedia dt80/1,
clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
- use=vt100,
+ use=vt100+4bsd,
# except in 132 column mode, where it needs a little padding.
# This is still less padding than the vt100, and you can always turn on
# the ^S/^Q handshaking, so you can use vt100 flavors for things like
#ctrl-A set SOM position at cursor position
#ctrl-G Bell
#ctrl-H Backspace
-#ctrl-I Horiz tab
+#ctrl-I Horizontal tab
#ctrl-J Linefeed
#ctrl-K Cursor up
#ctrl-L Cursor right
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
use=ncr260vt300pp,
-# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC vt200/300 with color capabilities added.
ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
colors#8, pairs#64,
# 'setf' definition. The escape sequence to set color attributes is
# ESC d y <foreground_color> <background_color> 1
# In addition, the background color can be changed through the desk accessories.
-# The capablitiy 'op' sets colors to green on black (default combination).
+# The capability 'op' sets colors to green on black (default combination).
#
# NOTE: The NCR Unix System Administrator's Shell will not function properly
-# if the 'pairs' capability is defined. Un-Comment the 'pairs'
+# if the 'pairs' capability is defined. Un-Comment the 'pairs'
# capability and recompile if you wish to have it included.
#
ncr260wy325pp|NCR 2900_260 wyse 325,
# are numbered 0 through 15.
#
# NOTE: The NCR Unix System Administrator's Shell does not function properly
-# with the 'pairs' capability defined as below. If you wish to
+# with the 'pairs' capability defined as below. If you wish to
# have it included, Un-comment it and recompile (using 'tic').
#
ncr260wy350pp|NCR 2900_260 wyse 350,
kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
# (pe7000m: this had
-# rmul=\E!\0, smul=\E!\040,
+# rmul=\E!\0, smul=\E!\040,
# which is probably wrong, it collides with kf0
pe7000m|perkin elmer 7000 series monochrome monitor,
am,
is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
\E[?8h,
- rc@, sc@, smkx=\E=, use=vt100,
+ rc@, sc@, smkx=\E=, use=vt100+4bsd,
# From: <jcoker@ucbic>
# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
# Steve Jacobson 8/85
pcplot|pc-plot terminal emulation program,
xenl@,
- csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
+ csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
# I've found that my KayPro II, running MDM730, continues to emulate an
# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
OTdN#30,
blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
# Lisaterm in 132 column ("wide") mode.
-mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
+mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
cols#132, use=mac,
#### Radio Shack/Tandy
ri=\215, rin@, use=amiga-h,
# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
-# I'm trying to write a termcap for a commodore b-128, and I'm
+# I'm trying to write a termcap for a commodore b-128, and I'm
# having a little trouble. I've had to map most of my control characters
# to something that unix will accept (my delete-char is a ctrl-t, etc),
# and create some functions (like cm), but thats life.
-# The problem is with the arrow keys - right, and up work fine, but
+# The problem is with the arrow keys - right, and up work fine, but
# left deletes the previous character and down I just can't figure out.
# Jove knows what I want, but I don't know what it's sending to me (it
# isn't thats bound to next-line in jove).
-# Anybody got any ideas? Here's my termcap.
+# Anybody got any ideas? Here's my termcap.
# DAG -- I changed his "^n" entries to "\n"; see if that works.
#
commodore|b-128|Commodore B-128 micro,
u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
.u8=\001Cu|\004r, use=minitel1b,
-### Note:
+# Note:
#
# Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
#
# Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
# Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
#
-### Fonctionne par exemple avec Midnight Commander (mc).
+# Fonctionne par exemple avec Midnight Commander (mc).
minitel2-80|minitel 2 (80cols) avec filets vt100 (DEC),
G0,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
- flash=\E[?5h\E[?5l, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
- hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
+ ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
%{255}%&%02X,
is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
# 1. Using double-shapes for vt100 graphical chars (eg: mc).
# 2. Native brown color corrected to good yellow color.
# 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
-# 4. Suppressed inexistant underlined mode (normally as bright).
+# 4. Suppressed nonexistent underlined mode (normally as bright).
# 5. ich/ich1 not filled because of non-curses programs.
#--
-# 6. Suppressed inexistant invisible mode.
+# 6. Suppressed nonexistent invisible mode.
#(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
# From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
#
# He comments:
-# viewdata lacks a true cup capabilitie,
+# viewdata lacks a true cup capability,
# so I achieved it with home and cud1/cuf1 sequences only !
viewdata|prestel/viewdata terminals,
am, bw, eslok, hz,
# CLR clear ^[`
# KBU keyboard unlock (set) ^[[W
# KBL keyboard lock (reset) ^[[X
-# CM character mode (async.) ^[k
+# CM character mode (async.) ^[k
# NEP non echoplex mode (by host) ^[l
-# EP echoplex mode (by host) ^[m
+# EP echoplex mode (by host) ^[m
# IM insert mode set ^[[I
-# IM insert mode reset ^[[J
-# RMS roll mode set ^[r
-# RMR roll mode reset ^[q
-# SM78 set mode vip7800 ^[[1q
-# SD scroll up (72 lines) ^[[0s
-# SD scroll down (72 lines) ^[[1s
+# IM insert mode reset ^[[J
+# RMS roll mode set ^[r
+# RMR roll mode reset ^[q
+# SM78 set mode vip7800 ^[[1q
+# SD scroll up (72 lines) ^[[0s
+# SD scroll down (72 lines) ^[[1s
# RBM block mode reset ^[[E
-# SLS status line set ^[w
-# SLR status line reset ^[v
-# SLL status line lock ^[O
-# LGS Line-graphic mode set ^[G
-# LGR Line-graphic mode reset ^[F
+# SLS status line set ^[w
+# SLR status line reset ^[v
+# SLL status line lock ^[O
+# LGS Line-graphic mode set ^[G
+# LGR Line-graphic mode reset ^[F
# TBC tab clear (at cursor pos.) ^[[g
-# TBI tab initialize ^[[N
+# TBI tab initialize ^[[N
# TBS tab set (at cursor pos.) ^[p
# PDS print data space ^[[0p
-# PHD print host data ^[[3p
+# PHD print host data ^[[3p
# PDT print data terminator ^[[<p
# PRES print adapter reset ^[[2p
# SSPR multi-part. reset ^[[<>u
# SSP0 partition 0 set ^[[00u
-# SSP1 partition n format 1 ^[[PnPnSTRINGu
-# SSP2 partition n format 2 ^[[PnPnSTRINGu
-# SSP3 partition n format 3 ^[[PnPnu
+# SSP1 partition n format 1 ^[[PnPnSTRINGu
+# SSP2 partition n format 2 ^[[PnPnSTRINGu
+# SSP3 partition n format 3 ^[[PnPnu
# ATR attribute (visual)
# blink : ^[sB
# dim : ^[sL
bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
# \E(B Use U.S. character set (otherwise # => british pound !)
# \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
-# \E[w 10 char/in pitch
+# \E[w 10 char/in pitch
# \E[1;132 full width horizontal margins
# \E[2g clear all tab stops
# \E[z 6 lines/in
# Approximate date of release was 1982 (early 80s, anyway), and it had several
# evolutions including (limited) color versions such as the PS330C. PS300s
# were effectively obsolete by the late 80s, replaced by raster graphics
-# systems, although specialized applications like molecular modelling
+# systems, although specialized applications like molecular modeling
# hung onto them for a while longer. AFAIK all E&S vector graphics systems
# are out of production, though of course E&S is very much alive (in 1996).
# (ps300: changed ":pt@:" to "it@" -- esr)
ps300|Picture System 300,
xt,
it@,
- rmso@, rmul@, smso@, smul@, use=vt100,
+ rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
#### General Electric (ge)
#
# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
# cursor, bc -> block cursor.
# From: Mike Meyers
-# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
+# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
# looks vt100-compatible -- esr)
z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
OTbs, OTpt, am, eslok, hs, mir, msgr,
\E[11m,
sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
-z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
+z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
m,
use=z29a,
is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
\E\^11;81s\E\^11;89s,
- rf@, ri=\EM\E[K$<5/>, use=vt100,
+ rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
# The GX-1000 manual is dated 1984. This looks rather like a VT-52.
modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
am, da, db,
#### Ramtek
#
# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
-# were competition for things like the Tektronics 4025.
+# were competition for things like the Tektronix 4025.
#
# Ramtek 6221 from BRL, probably by Doug Gwyn
OTdN@, cols#80, lines#24, lm#96,
cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
- kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
+ kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
+ use=vt100+4bsd,
tab132-w|tab132 in wide mode,
cols#132,
is2=\E[?7h\E[?3h\E[?5l, use=tab132,
# * cfont(1) in the PC 7300 documentation.
# */
#
-# struct altfdata /* structure for alt font data */
+# struct altfdata /* structure for alt font data */
# {
# short altf_slot; /* memory slot number */
# char altf_name[FNSIZE]; /* font name (file name) */
# Software (formerly Peripherals Computers & Supplies, Inc) of
# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
# also be reached at support@synergy.com.
-versaterm|versaterm vt100 emulator for the macintosh,
+versaterm|versaterm vt100 emulator for the Macintosh,
am, xenl,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
1%;m$<2>,
- sgr0=\E[0m$<2>, smacs@, use=vt100,
+ sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
# coupler attached, the whole rig fitting in a suitcase and more or less
# portable. Hot stuff for c.1977 :-) -- esr
# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
# Coded Character Sets"), include your snail-mail address, and you should
-# receive the document in due course. Don't expect an email acknowledgement.
+# receive the document in due course. Don't expect an email acknowledgment.
#
# Related standards include "X3.4-1977: American National Standard Code for
# Information Interchange" (the ASCII standard) and "X3.41.1974:
# sequences. In the main table, \E stands for an escape (\033) character,
# SPC for space. Pn stands for a single numeric parameter to be inserted
# in decimal ASCII. Ps stands for a list of such parameters separated by
-# semicolons. Parameter meanings for most parametrized sequences are
-# decribed in the notes.
+# semicolons. Parameter meanings for most parameterized sequences are
+# described in the notes.
#
# Sequence Sequence Parameter or
# Mnemonic Name Sequence Value Mode terminfo
# APC Applicatn Program Command \E _ - Delim -
# BEL Bell * ^G - - bel
# BPH Break Permitted Here * \E B - * -
-# BS Backpace * ^H - EF -
+# BS BackSpace * ^H - EF -
# CAN Cancel * ^X - - - (A)
# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
# CCH Cancel Previous Character \E T - - -
# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
# abbreviation.
#
-# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
-# char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
-# 5 = clear all char tabs, 6 = clear all line tabs.
+# (F) CTC parameter values:
+# 0 = set char tab,
+# 1 = set line tab,
+# 2 = clear char tab,
+# 3 = clear line tab,
+# 4 = clear all char tabs on current line,
+# 5 = clear all char tabs,
+# 6 = clear all line tabs.
#
# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
# abbreviation.
#
-# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
-# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
-# DSR, 6 = request CPR response.
+# (I) DSR parameter values:
+# 0 = ready,
+# 1 = busy,
+# 2 = busy, will send DSR later,
+# 3 = malfunction,
+# 4 = malfunction, will send DSR later,
+# 5 = request DSR,
+# 6 = request CPR response.
#
-# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
-# 1 = clear from beginning, 2 = clear.
+# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
+# 0 = clear to end,
+# 1 = clear from beginning,
+# 2 = clear.
#
# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
#
# (N) ECMA-48 calls this "Character Tabulation" but retains the HT
# abbreviation.
#
-# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
-# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
-# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
-# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
-# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
-# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
-# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
-# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
-# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
-# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
-# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
-# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
-# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
-# 61-65 = variable highlights for ideograms.
+# (O) SGR parameter values:
+# 0 = default mode (attributes off),
+# 1 = bold,
+# 2 = dim,
+# 3 = italicized,
+# 4 = underlined,
+# 5 = slow blink,
+# 6 = fast blink,
+# 7 = reverse video,
+# 8 = invisible,
+# 9 = crossed-out (marked for deletion),
+# 10 = primary font,
+# 10 + n (n in 1..9) = nth alternative font,
+# 20 = Fraktur,
+# 21 = double underline,
+# 22 = turn off 2,
+# 23 = turn off 3,
+# 24 = turn off 4,
+# 25 = turn off 5,
+# 26 = proportional spacing,
+# 27 = turn off 7,
+# 28 = turn off 8,
+# 29 = turn off 9,
+# 30 = black fg,
+# 31 = red fg,
+# 32 = green fg,
+# 33 = yellow fg,
+# 34 = blue fg,
+# 35 = magenta fg,
+# 36 = cyan fg,
+# 37 = white fg,
+# 38 = set fg color as in CCITT T.416,
+# 39 = set default fg color,
+# 40 = black bg
+# 41 = red bg,
+# 42 = green bg,
+# 43 = yellow bg,
+# 44 = blue bg,
+# 45 = magenta bg,
+# 46 = cyan bg,
+# 47 = white bg,
+# 48 = set bg color as in CCITT T.416,
+# 49 = set default bg color,
+# 50 = turn off 26,
+# 51 = framed,
+# 52 = encircled,
+# 53 = overlined,
+# 54 = turn off 51 & 52,
+# 55 = not overlined,
+# 56-59 = reserved,
+# 61-65 = variable highlights for ideograms.
#
# (P) SI is also called LSO, Locking Shift Zero.
#
# use CUD for this function and ignore VPR. ECMA calls it `Line Position
# Absolute' but retains the VPA abbreviation.
#
-# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
-# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
-# from secondary aux device, 4 = stop relay to primary aux device, 5 =
-# start relay to primary aux device, 6 = stop relay to secondary aux device,
-# 7 = start relay to secondary aux device.
+# (S) MC parameters:
+# 0 = start xfer to primary aux device,
+# 1 = start xfer from primary aux device,
+# 2 = start xfer to secondary aux device,
+# 3 = start xfer from secondary aux device,
+# 4 = stop relay to primary aux device,
+# 5 = start relay to primary aux device,
+# 6 = stop relay to secondary aux device,
+# 7 = start relay to secondary aux device.
#
# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
# abbreviation.
#
# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
#
-# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
-# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
-# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
-# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
-# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
-# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
-# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
-# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
-# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
-# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
-# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
-# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
-# from ECMA-48's 5th edition but are listed here for reference.
+# (W) RM/SM modes are as follows:
+# 1 = Guarded Area Transfer Mode (GATM),
+# 2 = Keyboard Action Mode (KAM),
+# 3 = Control Representation Mode (CRM),
+# 4 = Insertion Replacement Mode (IRM),
+# 5 = Status Report Transfer Mode (SRTM),
+# 6 = Erasure Mode (ERM),
+# 7 = Line Editing Mode (LEM),
+# 8 = Bi-Directional Support Mode (BDSM),
+# 9 = Device Component Select Mode (DCSM),
+# 10 = Character Editing Mode (HEM),
+# 11 = Positioning Unit Mode (PUM),
+# 12 = Send/Receive Mode (SRM),
+# 13 = Format Effector Action Mode (FEAM),
+# 14 = Format Effector Transfer Mode (FETM),
+# 15 = Multiple Area Transfer Mode (MATM),
+# 16 = Transfer Termination Mode (TTM),
+# 17 = Selected Area Transfer Mode (SATM),
+# 18 = Tabulation Stop Mode (TSM),
+# 19 = Editing Boundary Mode (EBM),
+# 20 = Line Feed New Line Mode (LF/NL),
+# 21 = Graphic Rendition Combination Mode (GRCM),
+# 22 = Zero Default Mode (ZDM).
+#
+# The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
+# but are listed here for reference.
#
# (X) Select Alternate Presentation Variants is used only for non-Latin
# alphabets.
# terminfo entry are followed with the corresponding capability in parens:
#
# CSI <n>k disable (n=0) or enable (n=1) keyclick
-# CSI 2h lock keyboard
-# CSI 2i send screen as input
-# CSI 2l unlock keyboard
-# CSI 6m enable background color intensity
+# CSI 2h lock keyboard
+# CSI 2i send screen as input
+# CSI 2l unlock keyboard
+# CSI 6m enable background color intensity
# CSI <0-2>c reserved
# CSI <0-59>m select graphic rendition
# CSI <n>;<m>H (cup) cursor to line n and column m
# CSI <n>e cursor down n lines and in first column
# CSI <n>g (cbt) clear all tabs
# CSI <n>z make virtual terminal n active
-# CSI ?7h (smam) turn automargin on
-# CSI ?7l (rmam) turn automargin off
-# CSI s save cursor position
-# CSI u restore cursor position to saved value
+# CSI ?7h (smam) turn automargin on
+# CSI ?7l (rmam) turn automargin off
+# CSI s save cursor position
+# CSI u restore cursor position to saved value
# CSI =<c>A set overscan color
# CSI =<c>F set normal foreground color
# CSI =<c>G set normal background color
# CSI =<s>;<e>C set cursor parameters
# CSI =<x>D enable/disable intensity of background color
# CSI =<x>E set/clear blink vs. bold background
-# CSI 7 (sc) (sc) save cursor position
-# CSI 8 (rc) (rc) restore cursor position to saved value
+# CSI 7 (sc) (sc) save cursor position
+# CSI 8 (rc) (rc) restore cursor position to saved value
# CSI H (hts) (hts) set tab stop
# CSI Q<n><string> define function key string
# (string must begin and end with delimiter char)
-# CSI c (clear) clear screen
+# CSI c (clear) clear screen
#
# The lack of any specification for attributes in SGR (among other things)
# makes this a wretchedly weak standard. The table above is literally
# CL key_char_left
# CR key_char_right
# CW key_change_window create_window
-# EN key_end kend
+# EN key_end kend
# HM key_home khome
# HP ??
-# LD key_delete_line kdl1
-# LF key_linefeed label_off
+# LD key_delete_line kdl1
+# LF key_linefeed label_off
# NU key_next_unlocked_cell
-# PD key_page_down knp
+# PD key_page_down knp
# PL ??
# PN start_print mc5
# PR ??
# PS stop_print mc4
-# PU key_page_up kpp pulse
+# PU key_page_up kpp pulse
# RC key_recalc remove_clock
# RF key_toggle_ref req_for_input
-# RT key_return kent
-# UP key_up_arrow kcuu1 parm_up_cursor
+# RT key_return kent
+# UP key_up_arrow kcuu1 parm_up_cursor
# WL key_word_left
# WR key_word_right
#
#
# There is a set of nonstandard terminfos used by IBM's AIX operating system.
# The AIX terminfo library diverged from SVr1 terminfo, and replaces all
-# capabilities following prtr_non with the following special capabilties:
+# capabilities following prtr_non with the following special capabilities:
# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
#
#### XTERM Extensions:
#
-# Most of the xterm extensions are for function-keys. Since patch #94 (in
+# Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
# 1999), xterm has supported shift/control/alt/meta modifiers which produce
# additional function-key strings. Some other developers copied the feature,
-# though they did not follow xterm's lead in patch #167 (in 2002), to make
+# though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
# these key definitions less ambiguous.
#
# A few terminals provide similar functionality (sending distinct keys when
#
# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
# This was implemented for the Hurd.
+# rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
+# experimental feature of tmux.
# E3 clears the terminal's scrollback buffer. This was implemented in the
# Linux 3.0 kernel as a security feature. It matches a feature which was
# added in xterm patch #107.
# 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
# * Merged in DEC's official entries for its terminals. The only old
# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
-# * Replaced the translated BBN Bitgraph entries with purpose-built
+# * Replaced the translated BBN BitGraph entries with purpose-built
# ones from AT&T's SVr3.
# * Replaced the AT&T entries with AT&T's official terminfos.
# * Added teleray 16, vc415, cops10.
# * Corrected hpa/vpa in linux entry. They still fail the worm test.
# * We can handle the HP meml/memu capability now.
# * Added smacs to klone entries, just as documentation.
-# * Carrected ansi.sys and cit-500 entries.
+# * Corrected ansi.sys and cit-500 entries.
# * Added z39, vt320-k311, v220c, and avatar entries.
# * Make pcansi use the ansi.sys invis capability.
# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
# 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
# * Another sweep through the Shuford archive looking for new info.
# * Added dg100 alias to dg6053 based on a comp.terminals posting.
-# * Added st52 from Per Persson.
+# * Added st52 from Per Persson.
# * Added eterm from the GNU Emacs 19.30 distribution.
# * Freeze for 1.9.9.
# 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
# * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
#
# 1998/10/10
-# * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
+# * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
# * correct initialization string in xterm-r5, add misc other features
-# to correspond with xterm patch 84 - TD
+# to correspond with xterm patch #84 - TD
#
# 1998/12/19
-# * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
+# * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
# * add Mathew Vernon's mach console entries
# * corrections for ncsa function-keys (report by Larry Virden)
#
# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
# xterm and ncsa entries by removing the unneeded ones. Note that
# some entries will return kend & khome versus kslt and kfnd, for
-# PC-style keyboards versus strict vt220 compatiblity - TD
+# PC-style keyboards versus strict vt220 compatibility - TD
#
# 1999/3/13
# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
# (Jeffrey C Honig)
#
# 1999/3/27
-# * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
+# * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
#
# 1999/4/10
# * add linux-lat, from RedHat patches to ncurses 4.2
# * add entries for mterm (mterm, mterm-ansi, decansi) -TD
# * ncr260wy350pp has only 16 color pairs -TD
# * add sun-type4 from NetBSD -TD
-# * update xterm-xfree86 to current (patch 170) -TD
+# * update xterm-xfree86 to current (xterm patch #170) -TD
# * add screen-bce, screen-s entries -TD
# * add xterm-1002, xterm-1003 entries -TD
#
# * similar fixups for cvvis/cnorm various entries -TD
#
# 2004-05-22
-# * remove 'ncv' from xterm-256color (patch 188) -TD
+# * remove 'ncv' from xterm-256color (xterm patch #188) -TD
#
# 2004-06-26
# * add mlterm -TD
#
# 2007-11-11
# * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
-# xterm starting with patch #216 -TD
+# xterm starting with xterm patch #216 -TD
# * make legacy xterm entries such as xterm-24 inherit from xterm-old,
# to match xterm #230 -TD
# * extend xterm+pccX entries to match xterm #230 -TD
#
# 2009-12-19
# * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
-# * rename minix to minix-1.7, add minix entry for Minux3 -TD
+# * rename minix to minix-1.7, add minix entry for Minix3 -TD
#
# 2009-12-26
# * add bterm (bogl 0.1.18) -TD
# * correct padding in sbi entry -TD
#
# 2014-06-07
-# * update xterm-new to patch #305 -TD
+# * update xterm-new to xterm patch #305 -TD
# + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
# (italic). This was a long-ago typo in screen 3.1.1 which was
# overlooked until a few terminal emulators implemented the feature -TD
# + add linux-m1 minitel entries (patch by Alexandre Montaron).
# + correct rs2 string for vt100-nam -TD
#
+# 2016-11-26
+# + modify linux-16color to not mask dim, standout or reverse with the
+# ncv capability -TD
+# + add 0.1sec mandatory delay to flash capabilities using the VT100
+# reverse-video control -TD
+# + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
+# entry, to avoid conflict with the user-defined mapping. The reset
+# feature will use ISO-8859-1 in any case (Mikulas Patocka).
+#
+# 2016-12-30
+# + merge current st description (report by Harry Gindi) -TD
+#
+# 2016-12-31
+# + modify flash capability for linux and wyse entries to put the delay
+# between the reverse/normal escapes rather than after -TD
+#
+# 2017-01-28
+# + minor comment-fixes to help automate links to bug-urls -TD
+# + add dvtm, dvtm-256color -TD
+# + add settings corresponding to xterm-keys option to tmux entry to
+# reflect upcoming change to make that option "on" by default
+# (patch by Nicholas Marriott).
+# + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
+# + add dumb-emacs-ansi -TD
+#
+# 2017-03-05
+# + correct a few spelling errors in comments -TD
+# + add fbterm -TD
+#
+# 2017-03-11
+# + add vt100+4bsd building block, use that for older terminals rather
+# than "vt100" which is now mostly used as a building block for
+# terminal emulators -TD
+# + modify vt100 rs2 string to reset vt52 mode and scrolling regions
+# (report/analysis by Robert King) -TD
+#
+# 2017-04-01
+# + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
+# + add smso for env230, to match sgr -TD
+# + remove p7/protect from sgr in fbterm -TD
+# + drop setf/setb from fbterm; setaf/setab are enough -TD
+# + make xterm-pcolor sgr consistent with other capabilities -TD
+# + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
+# (discussion with Nicholas Marriott)
+#
######## SHANTIH! SHANTIH! SHANTIH!
projects / ncurses.git / blobdiff