# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.455 $
-# $Date: 2012/05/12 23:31:44 $
+# $Revision: 1.854 $
+# $Date: 2021/01/25 21:59:45 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
# license from xterm.
#
#------------------------------------------------------------------------------
+# https://invisible-island.net/ncurses/ncurses.faq.html#terminfo_copying
+# https://invisible-island.net/personal/copyrights.html#removing_notes
+#------------------------------------------------------------------------------
+#
# Version 10.2.1
# terminfo syntax
#
dumb|80-column dumb tty,
am,
cols#80,
- bel=^G, cr=^M, cud1=^J, ind=^J,
+ bel=^G, cr=\r, cud1=\n, ind=\n,
unknown|unknown terminal type,
gn, use=dumb,
lpr|printer|line printer,
OTbs, hc, os,
cols#132, lines#66,
- bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ind=\n,
glasstty|classic glass tty interpreting ASCII control characters,
OTbs, am,
cols#80,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
- kcud1=^J, nel=^M^J, .kbs=^H,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ht=^I, kcub1=^H,
+ kcud1=\n, nel=\r\n, .kbs=^H,
vanilla|dumb tty,
OTbs,
- bel=^G, cr=^M, cud1=^J, ind=^J,
+ bel=^G, cr=\r, cud1=\n, ind=\n,
# This is almost the same as "dumb", but with no prespecified width.
# DEL and ^C are hardcoded to act as kill characters.
# ^D acts as a line break (just like newline).
# It also interprets
-# \033];xxx\007
+# \033];xxx\007
# for compatibility with xterm -TD
9term|Plan9 terminal emulator for X,
am,
- OTnl=^J, bel=^G, cud1=^J,
+ OTnl=\n, bel=^G, cud1=\n,
#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
#
# ANSI capabilities are broken up into pieces, so that a terminal
# implementing some ANSI subset can use many of them.
-ansi+local1,
+ansi+local1|ANSI normal-mode cursor-keys,
cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
-ansi+local,
+ansi+local|ANSI normal-mode parameterized cursor-keys,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, use=ansi+local1,
-ansi+tabs,
+ansi+tabs|ANSI tab-stops,
cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
-ansi+inittabs,
+ansi+inittabs|ANSI initial tab-stops,
it#8, use=ansi+tabs,
-ansi+erase,
+ansi+erase|ANSI clear screen/line,
clear=\E[H\E[J, ed=\E[J, el=\E[K,
-ansi+rca,
+ansi+rca|ANSI relative cursor-addressing,
hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
-ansi+cup,
+ansi+cup|ANSI absolute cursor-addressing,
cup=\E[%i%p1%d;%p2%dH, home=\E[H,
-ansi+rep,
+ansi+rep|ANSI repeat-character,
rep=%p1%c\E[%p2%{1}%-%db,
-ansi+idl1,
+ansi+idl1|ANSI insert/delete one line,
dl1=\E[M, il1=\E[L,
-ansi+idl,
+ansi+idl|ANSI insert/delete lines,
dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
-ansi+idc,
- dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
-ansi+arrows,
+ansi+idc1|ANSI insert/delete one character,
+ dch1=\E[P, ich1=\E[@, rmir=\E[4l, smir=\E[4h,
+ansi+idc|ANSI insert/delete characters,
+ dch=\E[%p1%dP, ich=\E[%p1%d@, use=ansi+idc1,
+ansi+arrows|ANSI normal-mode cursor-keys,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
khome=\E[H,
-ansi+sgr|ansi graphic renditions,
+ansi+sgr|ANSI graphic renditions,
blink=\E[5m, invis=\E[8m, rev=\E[7m,
sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
sgr0=\E[0m,
-ansi+sgrso|ansi standout only,
+ansi+sgrso|ANSI standout only,
rmso=\E[m, smso=\E[7m,
-ansi+sgrul|ansi underline only,
+ansi+sgrul|ANSI underline only,
rmul=\E[m, smul=\E[4m,
-ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
+ansi+sgrbold|ANSI graphic renditions; assuming terminal has bold; not dim,
bold=\E[1m,
- sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
+ %;%?%p7%t8;%;m,
use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
-ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
+ansi+sgrdim|ANSI graphic renditions; assuming terminal has dim; not bold,
dim=\E[2m,
- sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;
+ %;%?%p7%t8;%;m,
use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
-ansi+csr|ansi scroll-region plus cursor save & restore,
+
+# ECMA-48 does not specify scroll-regions, but most people consider it to be
+# "ANSI" because it is widely-supported. See ecma+index for the standard form.
+ansi+csr|ANSI scroll-region plus cursor save & restore,
csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
# The normal (ANSI) flavor of "media copy" building block asserts that
# characters sent to the printer do not echo on the screen. DEC terminals
# can also be put into autoprinter mode, where each line is sent to the
# printer as you move off that line, e.g., by a carriage return.
-ansi+pp|ansi printer port,
+ansi+pp|ANSI printer port,
mc5i,
mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
dec+pp|DEC autoprinter mode,
# will work with any Intel console, they all seem to have inherited \E[11m
# from the ANSI.SYS de-facto standard.
klone+acs|alternate character set for ansi.sys displays,
- acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
+ \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
+ \301w\302x\263y\363z\362{\343|\330}\234~\376,
rmacs=\E[10m, smacs=\E[11m,
# Highlight controls corresponding to the ANSI.SYS standard. Most
klone+sgr|attribute control for ansi.sys displays,
blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
rmso=\E[m, rmul=\E[m,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
+ %t;1%;%?%p9%t;11%;m,
sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
use=klone+acs,
# Most Intel boxes do not treat "invis" (invisible) text.
klone+sgr8|attribute control for ansi.sys displays,
invis=\E[8m,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
+ %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
use=klone+sgr,
# Highlight controls corresponding to the ANSI.SYS standard. *All*
klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
rmul=\E[m,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
+ %t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
use=klone+acs,
# KOI8-R (RFC1489) acs (alternate character set)
# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
- acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
+ acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i
+ \220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t
+ \206u\207v\210w\211x\201y\230z\231{\267|\274}L~
+ \225,
rmacs=\E[10m, smacs=\E[11m,
# ANSI.SYS color control. The setab/setaf caps depend on the coincidence
colors#8, ncv#3, pairs#64,
op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ecma+italics|ECMA-48 italics,
+ ritm=\E[23m, sitm=\E[3m,
+
# Attribute control for ECMA-48-compatible terminals
ecma+sgr|attribute capabilities for true ECMA-48 terminals,
rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
+ecma+strikeout|ECMA-48 strikeout/crossed-out,
+ rmxx=\E[29m, smxx=\E[9m,
+
+# ECMA-48 does not include the VT100 indexing and scroll-margins. It has its
+# own variation.
+ecma+index|ECMA-48 scroll up/down,
+ indn=\E[%p1%dS, rin=\E[%p1%dT,
+
# For comparison, here are all the capabilities implied by the Intel
# Binary Compatibility Standard (level 2) that fit within terminfo.
# For more detail on this rather pathetic standard, see the comments
cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
- hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
- indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
- smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
+ hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, rc=\E7, rmam=\E[?7l, sc=\E7, smam=\E[?7h,
+ tbc=\E[g, vpa=\E[%i%p1%dd, use=ecma+index,
#### ANSI/ECMA-48 terminals and terminal emulators
#
# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
#
# (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
-ansi77|ansi 3.64 standard 1977 version,
+ansi77|ANSI 3.64 standard 1977 version,
OTbs, am, mir,
cols#80, it#8, lines#24,
- bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ bel=^G, clear=\E[;H\E[2J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
- kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
+ kf2=\EOR, kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM,
rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
OTbs, am, mir, msgr,
cols#80, it#8, lines#24,
- bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
+ bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=\E[D,
cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
- hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ hts=\EH, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
use=klone+sgr-dumb,
pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
- ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
- kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
- rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
- s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
- vpa=\E[%i%p1%dd, use=pcansi-m,
+ ich=\E[%p1%d@, il=\E[%p1%dL, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kich1=\E[L, mc4=\E[4i,
+ mc5=\E[5i, nel=\r\E[S, rep=%p1%c\E[%p2%{1}%-%db,
+ s0ds=\E(B, s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, use=ecma+index, use=pcansi-m,
ansi+enq|ncurses extension for ANSI ENQ,
u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
# underline, and reverse, which won't matter much if the terminal
# can't do some of those. Padding is assumed to be zero, which
# shouldn't hurt since xon/xoff is assumed.
-ansi-generic|generic ansi standard terminal,
+ansi-generic|ansiterm|generic ansi standard terminal,
am, xon,
cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
use=ansi+rca, use=ansi+erase, use=ansi+tabs,
cols#80, lines#25,
clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
- is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
+ is2=\E[m\E[?7h, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
u7=\E[6n, use=klone+color, use=klone+sgr8,
kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
- pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%?%p1%{13}%<%t%'z'%e%?%p1%{23}%<%t%'G'%e%?%p1%{25}%<%t%'p'%e%?%p1%'#'%<%t%'E'%e%?%p1%'%'%<%t%'f'%e%?%p1%'/'%<%t%'C'%e%{92}%;%;%;%;%;%;%;%p1%+%d;%p2"%s"p,
+ pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<
+ %t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t
+ %'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
use=ansi.sys-old,
#
# Consequently the End keypad key could not be set (it is relatively safe and
# actually useful because it sends ^@ O, which beeps and opens a line above).
ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
- is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
- rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
- smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
+ is2=U2\sPC-DOS\s3.1\sANSI.SYS\swith\skeypad\sredefined\sfor
+ \svi\s9-29-86\n\E[;75;8p,
+ rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;
+ 0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
+ smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p
+ \E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
use=ansi.sys,
#
# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
# See ansi.sysk and nansi.sys above.
nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
- is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
+ is2=U4\sPC-DOS\sPublic\sDomain\sNANSI.SYS\swith\skeypad
+ \sredefined\sfor\svi\s9-29-86\n\E[;75;8p,
use=ansi.sysk,
-#### ANSI console types
+#### Atari ST terminals
-#
-# Atari ST terminals.
# From Guido Flohr <gufl0000@stud.uni-sb.de>.
#
tw52|tw52-color|Toswin window manager with color,
bce,
- colors#16, pairs#256,
+ colors#16, pairs#0x100,
oc=\Eb?\Ec0, op=\Eb?\Ec0,
- setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
- setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
- setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
- setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+ setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
+ %{48}%+%c,
+ setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
+ %{48}%+%c,
+ setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
+ %{48}%+%c,
+ setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1
+ %{48}%+%c,
use=tw52-m,
tw52-m|Toswin window manager monochrome,
ul,
lines#30, use=at-color,
st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
bce,
- colors#16, pairs#256,
+ colors#16, pairs#0x100,
is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
- setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
- setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
- setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
- setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+ setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
+ %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
+ %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
+ %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
+ %{14}%=%t6%e?,
+ setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
+ %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
+ %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:
+ %e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1
+ %{14}%=%t6%e?,
+ setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
+ %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
+ %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
+ %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
+ %t6%e?,
+ setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}
+ %=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1
+ %{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e
+ %p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=
+ %t6%e?,
use=st52,
st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
am, eo, mir, npc,
cols#80, it#8, lines#24,
- bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
+ bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=\r, cub1=\ED,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
- il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
- kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
+ il1=\EL, ind=\n, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=^?,
kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
- kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
+ kund=\EK, nel=\r\n, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
tw100|toswin vt100 window mgr,
eo, mir, msgr, xon,
colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
- acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
- clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ clear=\E[2J\E[H, cnorm=\Ee, cr=\r, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
- hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
+ hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=\n, is2=\E<\E)0, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=^?,
kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
rmso=\E[m, rmul=\E[m,
rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
sc=\E7,
- setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
- setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
+ setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
+ %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
+ %=%t3%e7%;m,
+ setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=
+ %t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'
+ %=%t3%e7%;m,
sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# The entries for stv52 and stv52pc probably need a revision.
am, msgr,
cols#80, it#8, lines#30,
bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
- cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
+ kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
stv52pc|MiNT virtual console with PC charset,
am, msgr,
cols#80, it#8, lines#30,
- acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
+ acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j
+ \331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y
+ \363z\362{\343|\366}\234~\371,
bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
- cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cnorm=\E. \Ee, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
+ kcuu1=\EA, kdch1=^?, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
smso=\Ep, smul=\EyH,
-#### Atari ST
-#
-
# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
atari-old|atari st,
OTbs, am,
# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
lines#49,
- is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
- use=vt220,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220-base,
# MiNT VT52 emulation. 80 columns, 25 rows.
# MiNT is Now TOS, the operating system which comes with all Ataris now
# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
st52-old|Atari ST with VT52 emulation,
am, km,
cols#80, lines#25,
- bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
+ bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=\r, cub1=\ED,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
- ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
+ ind=\n, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
- kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
+ kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=\r\n, rc=\Ek,
ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
smcup=\Ee, smso=\Ep,
beterm|BeOS Terminal,
am, eo, mir, msgr, xenl, xon,
colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
- bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
- nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
+ nel=\r\n, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
linux-basic|linux console,
am, bce, eo, mir, msgr, xenl, xon,
it#8, ncv#18, U8#1,
- acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
+ \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
+ \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
- el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
+ el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
- kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
- kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
- kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
+ kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
- kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
+ kspd=^Z, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
- use=ecma+color,
+ use=ecma+color, use=linux+sfkeys,
+
+linux+decid|ncurses extension for Linux console DECID,
+ u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\EZ,
+
+linux+sfkeys|shifted function-keys for Linux console,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
linux-m|Linux console no color,
colors@, pairs@,
# 1.9.9.
linux-c-nc|linux console with color-change,
ccc,
- initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
+ initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
+ %02x%p4%{255}%*%{1000}%/%02x,
oc=\E]R, use=linux-basic,
# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
linux-c|linux console 1.3.6+ for older ncurses,
ccc,
- initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
+ initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}
+ %*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
+ %+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'
+ %+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx
+ %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx
+ %{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}
+ %/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
+ %d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx
+ %d%;,
oc=\E]R, use=linux-basic,
# The 2.2.x kernels add a private mode that sets the cursor type; use that to
cvvis=\E[?25h\E[?8c, use=linux-c-nc,
# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
-# http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
-# Using SI/SO has the drawback that it confuses screen. SCS would work.
-# However, SCS is buggy (see comment in Debian #515609) -TD
-# Further, this breaks longstanding workarounds for Linux console's line
-# drawing (see Debian 665959) -TD
+# http://lkml.iu.edu/hypermail/linux/kernel/0602.2/0738.html
+# Although the kernel has mappings for these, they were not in the default
+# font (tested with Debian and Fedora):
+# '`' diamond
+# '~' scan line 1
+# 'p' scan line 3
+# 'r' scan line 7
+# '_' scan line 9
+#
+# The fix for SI/SO is part of a configurable (i.e., "optional") kernel feature
+# misleadingly called CONFIG_CONSOLE_TRANSLATIONS. Disabling that not only
+# omits the line-drawing using SI/SO, but also part/all of the Unicode feature:
+#
+# https://cateee.net/lkddb/web-lkddb/CONSOLE_TRANSLATIONS.html
+# "This enables support for font mapping and Unicode translation on virtual consoles."
+#
+# This mailing list thread in July 2008 illustrates:
+#
+# https://marc.info/?t=121734656700005&r=1&w=4
+# "commit a29ccf6f823a84d89e1c7aaaf221cf7282022024 break console on slackware 12.1"
+#
+# The change which made it configurable was to reduce the size for use in
+# embedded systems. Some background is found in
+#
+# https://lwn.net/Articles/284767/
+# "An interview with the new embedded maintainers"
linux2.6|linux 2.6.x console,
- rmacs=^O,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz{{||}}~~,
+ enacs=\E)0, rmacs=^O,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, use=linux2.2,
# The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
+# It is the same as xterm's erase-saved-lines feature.
linux3.0|linux 3.0 kernels,
- E3=\E[3;J, use=linux2.6,
+ E3=\E[3J, use=linux2.6,
# This is Linux console for ncurses.
linux|linux console,
- use=linux2.2,
+ use=linux3.0,
# Subject: linux 2.6.26 vt back_color_erase
# Changes to the Linux console driver broke bce model as reported in
# https://bugzilla.novell.com/show_bug.cgi?id=418613
# apparently from
# http://lkml.org/lkml/2008/4/26/305
-# http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
+# http://lkml.org/lkml/2008/10/3/66
linux2.6.26|linux console w/o bce,
bce@, use=linux2.6,
# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
linux-koi8|linux with koi8 alternate character set,
- acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
+ acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i
+ \276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v
+ \211w\210x\201y\230z\231{\267|\274~\224,
use=linux, use=klone+koi8acs,
# Another entry for KOI8-r with Qing Long's acsc.
# Entry for the latin1 and latin2 fonts
linux-lat|linux with latin1 or latin2 alternate character set,
- acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i
+ \316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u
+ \215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
use=linux,
# This uses graphics from VT codeset instead of from cp437.
# reason: cp437 (aka "straight to font") is not functional under luit.
# from: Andrey V Lukyanov <land@long.yar.ru>.
linux-vt|linux console using VT codes for graphics,
- acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz~~,
rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0,
smpch@, use=linux,
initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
use=linux,
+# FbTerm
+# Another variant. There are two parts (src, src/lib) with the latter
+# comprising the escape-sequence parsing. The copyright notice on that
+# says it is based on GTerm by Timothy Miller.
+#
+# The original developer "dragchan" has left, but as of March 2017 there is
+# (still dead) code from May 2015 here:
+# https://github.com/izmntuk/fbterm
+#
+# The acsc string may be incorrect.
+#
+# Not used here, the program recognizes escapes for italic, underline and
+# dim, rendering those as green, cyan and gray respectively.
+fbterm|FbTerm for Linux with framebuffer,
+ colors#0x100, pairs#0x10000,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
+ \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
+ \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
+ setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, use=linux,
+
# 16-color linux console entry; this works with a 256-character
# console font but bright background colors turn into dim ones when
# you use a 512-character console font. This uses bold for bright
# foreground colors and blink for bright background colors.
+#
+# Interestingly, the original version of this entry in 2009 used a documented
+# (but nonstandard) SGR 21, which was supported in the Linux console since 1992
+# as an equivalent for SGR 22. Long after (early 2018), someone modified the
+# console driver to make it ignore SGR 21 because the ECMA-48 standard
+# suggested a different use for that particular code:
+#
+# https://github.com/torvalds/linux/commit/65d9982d7e523a1a8e7c9af012da0d166f72fc56#diff-7da3c215d12c9f6b88e1a37d38b116f0
+#
+# Two years later, someone (unfamiliar with ECMA-48 this time) documented it:
+#
+# https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/commit/man4/console_codes.4?id=a133a6bc03d751a424fe0a4adea2198757599615
+#
+# For background, refer to the report on bug-ncurses:
+#
+# https://lists.gnu.org/archive/html/bug-ncurses/2019-10/msg00059.html
linux-16color|linux console with 16 colors,
- colors#16, ncv#54, pairs#256,
- setab=\E[4%p1%{8}%m%d%?%p1%{8}%>%t;5%e%p1%{8}%=%t;2%e;25%;m,
- setaf=\E[3%p1%{8}%m%d%?%p1%{8}%>%t;1%e%p1%{8}%=%t;2%e;21%;m,
+ colors#16, ncv#42, pairs#0x100,
+ setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
+ setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;22%;m,
use=linux,
# bterm (bogl 0.1.18)
bterm|bogl virtual terminal,
am, bce,
colors#8, cols#80, lines#24, pairs#64,
- acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
- cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
- kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
- kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
- kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
- kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
- kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
- op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
- rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
+ acsc=aajjkkllmmqqttuuxx, bold=\E[1m, clear=\E[H\E[2J,
+ cr=\r, cub1=^H, cud1=\n, cup=\E[%i%p1%d;%p2%dH, ed=\E[J,
+ el=\E[K, home=\E[H, ind=\n, kb2=\E[G, kbs=^?, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
+ kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ kspd=^Z, nel=\r\n, op=\E[49m\E[39m, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmso=\E[27m, rmul=\E[24m, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm, sgr0=\E[0m, smacs=^N, smso=\E[7m,
+ smul=\E[4m, use=vt220+cvis,
#### Mach
#
mach|Mach Console,
am, km,
cols#80, it#8, lines#25,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
- kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
#
# Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
mach-gnu|GNU Mach,
- acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l
+ \332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x
+ \263y\363z\362{\343|\330}\234~\376,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
- indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
- sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m,
- use=mach,
+ invis=\E[8m, nel=\EE,
+ sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
+ 2%;%?%p6%t;1%;%?%p7%t;8%;m,
+ use=ecma+index, use=mach,
mach-gnu-color|Mach Console with ANSI color,
colors#8, pairs#64,
setaf=\E[3%p1%dm, use=mach-gnu,
# From: Marcus Brinkmann
-# http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
+# http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/
#
# Comments in the original are summarized here:
#
#
# Reading the source, RIS resets cnorm, but not xmous.
hurd|The GNU Hurd console server,
- am, bce, bw, eo, km, mir, msgr, xon,
+ am, bce, bw, eo, km, mir, msgr, xenl, xon,
colors#8, it#8, ncv#18, pairs#64,
- acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP,
- dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
- ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg,
- home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
- invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\Ec, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ el1=\E[1K, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ invis=\E[8m, kb2=\E[G, kbs=^?, kcbt=\E[Z, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
- kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
- rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l,
- rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
- sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h,
- smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
- gsbom=\E[>1h,
+ kspd=^Z, nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T,
+ rmacs=\E[10m, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+ rs1=\EM\E[?1000l, sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
+ 2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ sgr0=\E[0m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, gsbom=\E[>1h,
+ use=ecma+index, use=ecma+italics, use=vt220+cvis,
-#### OSF Unix
+#### QNX
#
-# OSF/1 1.1 Snapshot 2
-pmcons|pmconsole|PMAX console,
+# QNX 4.0 Console
+# Michael's original version of this entry had <am@>, <smcup=\Ei>,
+# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
+# right corner without triggering a scroll. The ncurses terminfo library can
+# handle this case with the <ich1> capability, and prefers <am> for better
+# optimization. Bug: The <op> capability resets attributes.
+# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
+# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
+qnx|qnx4|qnx console,
+ daisy, km, mir, msgr, xhpa, xt,
+ colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
+ acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t
+ \303u\264v\301w\302x\263,
+ bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
+ cnorm=\Ey1, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
+ dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
+ il1=\EE, ind=\n, kBEG=\377\356, kCAN=\377\263,
+ kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
+ kDL=\377\366, kEND=\377\301, kEOL=\377\311,
+ kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
+ kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
+ kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
+ kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
+ kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
+ kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
+ kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
+ kclo=\377\343, kclr=\377\341, kcmd=\377\245,
+ kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
+ kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
+ kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
+ ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
+ kext=\377\270, kf1=\377\201, kf10=\377\212,
+ kf11=\377\256, kf12=\377\257, kf13=\377\213,
+ kf14=\377\214, kf15=\377\215, kf16=\377\216,
+ kf17=\377\217, kf18=\377\220, kf19=\377\221,
+ kf2=\377\202, kf20=\377\222, kf21=\377\223,
+ kf22=\377\224, kf23=\377\333, kf24=\377\334,
+ kf25=\377\225, kf26=\377\226, kf27=\377\227,
+ kf28=\377\230, kf29=\377\231, kf3=\377\203,
+ kf30=\377\232, kf31=\377\233, kf32=\377\234,
+ kf33=\377\235, kf34=\377\236, kf35=\377\276,
+ kf36=\377\277, kf37=\377\321, kf38=\377\322,
+ kf39=\377\323, kf4=\377\204, kf40=\377\324,
+ kf41=\377\325, kf42=\377\326, kf43=\377\327,
+ kf44=\377\330, kf45=\377\331, kf46=\377\332,
+ kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
+ kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
+ khlp=\377\350, khome=\377\240, khts=\377\342,
+ kich1=\377\253, kil1=\377\273, kind=\377\261,
+ kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
+ knp=\377\252, knxt=\377\312, kopn=\377\357,
+ kopt=\377\353, kpp=\377\242, kprt=\377\255,
+ kprv=\377\302, krdo=\377\336, kref=\377\354,
+ kres=\377\360, krfr=\377\347, kri=\377\271,
+ krmir=\377\313, krpl=\377\362, krst=\377\352,
+ ksav=\377\361, kslt=\377\247, kspd=\377\335,
+ ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
+ rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
+ rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
+ setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
+ smso=\E(, smul=\E[,
+#
+#
+qnxt|qnxt4|QNX4 terminal,
+ crxm, use=qnx4,
+#
+qnxm|QNX4 with mouse events,
+ maddr#1,
+ chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
+ mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
+ mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
+ smicm=\E/>2h, use=qnx4,
+#
+qnxw|QNX4 windows,
+ xvpa, use=qnxm,
+#
+# Monochrome QNX4 terminal or console. Setting this terminal type will
+# allow an application running on a color console to behave as if it
+# were a monochrome terminal. Output will be through stdout instead of
+# console writes because the term routines will recognize that the
+# terminal name starts with 'qnxt'.
+#
+qnxtmono|Monochrome QNX4 terminal or console,
+ colors@, pairs@,
+ scp@, use=qnx4,
+
+# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
+# (esr: commented out <scp> and <rmcup> to avoid warnings.)
+# (TD: derive from original qnx4 entry)
+qnxt2|qnx 2.15 serial terminal,
am,
- cols#128, lines#57,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
- ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
+ rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
+
+# QNX ANSI terminal definition
+qansi-g|QNX ANSI,
+ am, eslok, hs, xon,
+ colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
+ acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
+ el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
+ fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
+ ind=\E[S, invis=\E[9m,
+ is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
+ kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
+ kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
+ kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
+ kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
+ kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
+ kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
+ kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
+ kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
+ kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
+ kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
+ kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
+ kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
+ kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
+ kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
+ kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
+ kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
+ khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
+ kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
+ kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
+ kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
+ ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
+ rev=\E[7m, ri=\E[T, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
+ rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g,
+ tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, use=ansi+rep,
+ use=att610+cvis0, use=ecma+index,
+#
+qansi|QNX ansi with console writes,
+ daisy, xhpa, use=qansi-g,
+#
+qansi-t|QNX ansi without console writes,
+ crxm, use=qansi,
+#
+qansi-m|QNX ansi with mouse,
+ maddr#1,
+ chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
+ mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
+ mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
+ smicm=\E[>2h, use=qansi,
+#
+qansi-w|QNX ansi for windows,
+ xvpa, use=qansi-m,
+
+#### SCO consoles
# SCO console and SOS-Syscons console for 386bsd
# (scoansi: had unknown capabilities
scoansi-old|SCO Extended ANSI standard crt (5.0.5),
OTbs, am, bce, eo, xon,
colors#8, cols#80, it#8, lines#25, pairs#64,
- acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
+ acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMM
+ NNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwB
+ x3yszr{c}\034~\207,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
- ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
- kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
- kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
- kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
- kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
- kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
- kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
- kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
- kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
- kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
- kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
- kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
- rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
- rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
- smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
+ ind=\E[S, invis=\E[8m, kbeg=\E[E, kbs=^H, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
+ kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X,
+ kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
+ kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
+ kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
+ kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
+ kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
+ kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
+ kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
+ kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
+ kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
+ knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, rev=\E[7m,
+ ri=\E[T, rmacs=\E[10m, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
+ sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr0=\E[0;10m, smacs=\E[12m, smam=\E[?7h, smso=\E[7m,
+ smul=\E[4m, use=ecma+index,
scoansi-new|SCO Extended ANSI standard crt (5.0.6),
km,
civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
- sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m,
+ sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
+ %p7%t;8%;%?%p9%t;12%e;10%;m,
smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
scoansi|SCO Extended ANSI standard crt,
use=scoansi-old,
-# This actually describes the generic SVr4 display driver for Intel boxes.
-# The <dim=\E[2m> isn't documented and therefore may not be reliable.
-# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
-att6386|at386|386at|AT&T WGS 6386 console,
- am, bw, eo, xon,
- cols#80, it#8, lines#25,
- acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
- clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
- cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
- cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
- home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
- ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
- indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
- kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
- kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
- kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
- knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
- ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
- sc=\E7,
- sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
- sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
-# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
-pc6300plus|AT&T 6300 plus,
- OTbs, am, xon,
- cols#80, lines#24,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
- clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
- cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
- dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
- home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
- invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
- kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
- nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
- smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+#### SGI consoles
-# From: Benjamin C. W. Sittler <bsittler@nmt.edu>
-#
-# I have a UNIX PC which I use as a terminal attached to my Linux PC.
-# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
-# is broken. All the special key sequences are broken, making it unusable
-# with Emacs. The problem stems from the following:
-#
-# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
-# keypad!), loadable fonts, and strange highlighting modes ("dithered"
-# half-intensity, "smeared" bold, and real strike-out, for example.) It also
-# uses resizable terminal windows, but the bundled terminal program always
-# uses an 80x24 window (and doesn't support seem to support a 132-column
-# mode.)
-#
-# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
-# library which was a superset of SVr3.5 curses (called tam, for "terminal
-# access method".) tam includes support for real, overlapping windows,
-# onscreen function key labels, and bitmap graphics. But since the primary
-# user interface on the UNIX PC was a GUI program (ua, for "user
-# assistant",) and remote administration was considered important for the
-# machine, tam also supported VT100-compatible terminals attached to the
-# serial port or used across the StarLan network. To simulate the extra keys
-# not present on a VT100, users could press ESC and a two-letter sequence,
-# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
-# however, were not the same as those sent by the actual Undo key. The
-# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
-# (If you're interested in adding some of the tam calls to ncurses, btw, I
-# have the full documentation and several programs which use tam. It also
-# used an extended terminfo format to describe key sequences, special
-# highlighting modes, etc.)
-#
-# KEYS: This means that ncurses would quite painful on the UNIX PC, since
-# there are two sequences for every key-modifier combination (local keyboard
-# sequence and remote "VT100" sequence.) But I doubt many people are trying
-# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
-# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
-# seem to have been built from the manual describing the VT100 sequences.
-# This means it doesn't work for a real live UNIX PC.
-#
-# FONTS: The UNIX PC also has a strange interpretation of "alternate
-# character set". Rather than the VT100 graphics you might expect, it allows
-# up to 8 custom fonts to be loaded at any given time. This means that
-# programs expecting VT100 graphics will usually be disappointed. For this
-# reason I have disabled the smacs/rmacs sequences, but they could easily be
-# re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
-# manpage), should you wish to do so:
-#
-# SGR10 - Select font 0 - ESC [ 10 m or SO
-# SGR11 - Select font 1 - ESC [ 11 m or SI
-# SGR12 - Select font 2 - ESC [ 12 m
-# ... (etc.)
-# SGR17 - Select font 7 - ESC [ 17 m
-#
-# Graphics for line drawing are not reliably found at *any* character
-# location because the UNIX PC has dynamically reloadable fonts. I use font
-# 0 for regular text and font 1 for italics, but this is by no means
-# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
-#
-# MISC: The cursor visible/cursor invisible sequences were swapped in the
-# distributed terminfo.
-#
-# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
-# the UNIX PC terminfo entry. The modified version works great with Lynx,
-# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
-# attached by serial cable. In Emacs, even the Undo key works, and many
-# applications can now use the F1-F8 keys.
-#
-# esr's notes:
-# Terminfo entry for the AT&T Unix PC 7300
-# from escape(7) in Unix PC 7300 Manual.
-# Somewhat similar to a vt100-am (but different enough
-# to redo this from scratch.)
-#
-# /***************************************************************
-# *
-# * FONT LOADING PROGRAM FOR THE UNIX PC
-# *
-# * This routine loads a font defined in the file ALTFONT
-# * into font memory slot #1. Once the font has been loaded,
-# * it can be used as an alternative character set.
-# *
-# * The call to ioctl with the argument WIOCLFONT is the key
-# * to this routine. For more information, see window(7) in
-# * the PC 7300 documentation.
-# ***************************************************************/
-# #include <string.h> /* needed for strcpy call */
-# #include <sys/window.h> /* needed for ioctl call */
-# #define FNSIZE 60 /* font name size */
-# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
-# /*
-# * The file /usr/lib/wfont/special.8.ft comes with the
-# * standard PC software. It defines a graphics character set
-# * similar to that of the Teletype 5425 terminal. To view
-# * this or other fonts in /usr/lib/wfont, use the command
-# * cfont <filename>. For further information on fonts see
-# * cfont(1) in the PC 7300 documentation.
-# */
-#
-# struct altfdata /* structure for alt font data */
-# {
-# short altf_slot; /* memory slot number */
-# char altf_name[FNSIZE]; /* font name (file name) */
-# };
-# ldfont()
-# {
-# int wd; /* window in which altfont will be */
-# struct altfdata altf;
-# altf.altf_slot=1;
-# strcpy(altf.altf_name,ALTFONT);
-# for (wd =1; wd < 12; wd++) {
-# ioctl(wd, WIOCLFONT,&altf);
-# }
-# }
-#
-# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
-# they're confirmed by the man page for the System V display---esr)
-#
-att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
- am, xon,
- cols#80, it#8, lines#24,
- bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
- clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
- cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
- cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
- ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
- il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
- kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
- kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
- kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
- kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
- kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
- kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
- ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
- kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
- kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
- kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
- kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
- kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
- ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
- rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
- smul=\E[4m,
-
-# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
-# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
-# for the application keypad mode. We have added iris-ansi-ap rather than
-# change the original to keypad mode.
+# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
+# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
+# for the application keypad mode. We have added iris-ansi-ap rather than
+# change the original to keypad mode.
#
# (iris-ansi: added rmam/smam based on init string -- esr)
#
#
# F1-F12 generate different codes when shift or control modifiers are used.
# For example:
-# F1 \E[001q
+# F1 \E[001q
# shift F1 \E[013q
# control-F1 \E[025q
#
am,
cols#80, it#8, lines#40,
bel=^G, bold=\E[1m, clear=\E[H\E[2J,
- cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
- cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
+ cnorm=\E[9/y\E[12/y\E[=6l, cr=\r, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
- kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
- kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
- kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
- kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
- knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
- kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
- rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
- sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[146q,
+ kent=\r, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
+ kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
+ kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
+ kf9=\E[009q, khome=\E[H, kich1=\E[139q, knp=\E[154q,
+ kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
+ nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
+ rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
+ sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
tbc=\E[3g,
iris-ansi-ap|IRIS ANSI in application-keypad mode,
is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
iris-color|xwsh|IRIX ANSI with color,
ncv#33,
csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
- ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
- rmul=\E[24m, rs1=\Ec,
+ ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, rmul=\E[24m, rs1=\Ec,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sitm=\E[3m, use=vt100+enq, use=klone+color,
+ use=ecma+italics, use=vt100+enq, use=klone+color,
use=iris-ansi-ap,
-# The following is a version of the ibm-pc entry distributed with PC/IX,
-# (Interactive Systems' System 3 for the Big Blue), modified by Richard
-# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
-# (the former is untrue, and the latter failed under UCB/man); standout and
-# underline modes have been added. Note: this entry describes the "native"
-# capabilities of the PC monochrome display, without ANY emulation; most
-# communications packages (but NOT PC/IX connect) do some kind of emulation.
-pcix|PC/IX console,
- am, bw, eo,
- cols#80, lines#24,
- clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
- home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
- smul=\E[4m,
-
-# (ibmpcx: this entry used to be known as ibmx.
-# It formerly included the following extension capabilities:
-# :GC=b:GL=v:GR=t:RT=^J:\
-# :GH=\E[196g:GV=\E[179g:\
-# :GU=\E[193g:GD=\E[194g:\
-# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
-# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
-# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
-# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
-# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
-# what was there before. -- esr)
-ibmpcx|xenix|ibmx|IBM PC xenix console display,
- OTbs, am, msgr,
- cols#80, lines#25,
- clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
- ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
- kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
- kpp=\E[Z, use=klone+acs, use=klone+sgr8,
-
-#### QNX
+#### OpenBSD consoles
#
-
-# QNX 4.0 Console
-# Michael's original version of this entry had <am@>, <smcup=\Ei>,
-# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
-# right corner without triggering a scroll. The ncurses terminfo library can
-# handle this case with the <ich1> capability, and prefers <am> for better
-# optimization. Bug: The <op> capability resets attributes.
-# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
-# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
-qnx|qnx4|qnx console,
- daisy, km, mir, msgr, xhpa, xt,
- colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
- acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
- bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
- cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
- dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
- il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
- kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
- kDL=\377\366, kEND=\377\301, kEOL=\377\311,
- kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
- kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
- kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
- kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
- kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
- kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
- kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
- kclo=\377\343, kclr=\377\341, kcmd=\377\245,
- kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
- kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
- kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
- ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
- kext=\377\270, kf1=\377\201, kf10=\377\212,
- kf11=\377\256, kf12=\377\257, kf13=\377\213,
- kf14=\377\214, kf15=\377\215, kf16=\377\216,
- kf17=\377\217, kf18=\377\220, kf19=\377\221,
- kf2=\377\202, kf20=\377\222, kf21=\377\223,
- kf22=\377\224, kf23=\377\333, kf24=\377\334,
- kf25=\377\225, kf26=\377\226, kf27=\377\227,
- kf28=\377\230, kf29=\377\231, kf3=\377\203,
- kf30=\377\232, kf31=\377\233, kf32=\377\234,
- kf33=\377\235, kf34=\377\236, kf35=\377\276,
- kf36=\377\277, kf37=\377\321, kf38=\377\322,
- kf39=\377\323, kf4=\377\204, kf40=\377\324,
- kf41=\377\325, kf42=\377\326, kf43=\377\327,
- kf44=\377\330, kf45=\377\331, kf46=\377\332,
- kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
- kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
- khlp=\377\350, khome=\377\240, khts=\377\342,
- kich1=\377\253, kil1=\377\273, kind=\377\261,
- kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
- knp=\377\252, knxt=\377\312, kopn=\377\357,
- kopt=\377\353, kpp=\377\242, kprt=\377\255,
- kprv=\377\302, krdo=\377\336, kref=\377\354,
- kres=\377\360, krfr=\377\347, kri=\377\271,
- krmir=\377\313, krpl=\377\362, krst=\377\352,
- ksav=\377\361, kslt=\377\247, kspd=\377\335,
- ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
- rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
- rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
- setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
- smso=\E(, smul=\E[,
+# From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
#
+# The following terminal descriptions for the AMD/Intel PC console
+# were prepared based on information contained in the OpenBSD-4.9
+# termtypes.master and wscons(4) & vga(4) manuals (2010, November).
#
-qnxt|qnxt4|QNX4 terminal,
- crxm, use=qnx4,
+# Added bce based on testing with tack -TD
+# Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
+# Changed kbs to DEL and removed keys that duplicate stty settings -TD
#
-qnxm|QNX4 with mouse events,
- maddr#1,
- chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
- mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
- mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
- smicm=\E/>2h, use=qnx4,
-#
-qnxw|QNX4 windows,
- xvpa, use=qnxm,
-#
-# Monochrome QNX4 terminal or console. Setting this terminal type will
-# allow an application running on a color console to behave as if it
-# were a monochrome terminal. Output will be through stdout instead of
-# console writes because the term routines will recognize that the
-# terminal name starts with 'qnxt'.
-#
-qnxtmono|Monochrome QNX4 terminal or console,
- colors@, pairs@,
- scp@, use=qnx4,
-
-# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
-# (esr: commented out <scp> and <rmcup> to avoid warnings.)
-# (TD: derive from original qnx4 entry)
-qnxt2|qnx 2.15 serial terminal,
- am,
- civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
- rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
-
-# QNX ANSI terminal definition
-qansi-g|QNX ANSI,
- am, eslok, hs, xon,
- colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
- acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
- el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
- fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
- ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
- ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
- is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
- kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
- kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
- kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
- kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
- kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
- kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
- kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
- kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
- kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
- kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
- kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
- kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
- kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
- kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
- kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
- kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
- khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
- kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
- kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
- kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
- ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
- rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
- rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
- setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g,
- tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
-#
-qansi|QNX ansi with console writes,
- daisy, xhpa, use=qansi-g,
-#
-qansi-t|QNX ansi without console writes,
- crxm, use=qansi,
-#
-qansi-m|QNX ansi with mouse,
- maddr#1,
- chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
- mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
- mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
- smicm=\E[>2h, use=qansi,
-#
-qansi-w|QNX ansi for windows,
- xvpa, use=qansi-m,
-
-#### OpenBSD consoles
-#
-# From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
-#
-# The following terminal descriptions for the AMD/Intel PC console
-# were prepared based on information contained in the OpenBSD-4.9
-# termtypes.master and wscons(4) & vga(4) manuals (2010, November).
-#
-# Added bce based on testing with tack -TD
-# Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
-# Changed kbs to DEL and removed keys that duplicate stty settings -TD
+# Notes from testing with vttest:
+# fails wrapping test
+# no 8-bit controls
+# identifies as vt200 with selective erase, but does not implement DECSCA
+# no vt52 mode
+# also lacks these:
+# ESC # 8 DEC Screen Alignment Test (DECALN).
+# CSI ? 5 h Reverse Video (DECSCNM).
#
pccon+keys|OpenBSD PC keyboard keys,
- kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
+ kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[8~, kent=\r, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf21=\E[35~,
+ kf22=\E[36~, kf23=\E[37~, kf24=\E[38~, kf3=\E[13~,
kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
krfr=^R,
pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
- acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
- sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
+ acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y
+ #z#{*|!}#~o,
+ sgr=\E[0%?%p1%p3%|%t;7%;%?%p6%t;1%;%?%p2%t;4%;m,
+ sgr0=\E[m,
pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
- acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz{{||}}~~,
enacs=\E)0$<5>, rmacs=\E(B$<5>,
- sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
+ \E(B%;$<2>,
sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
+# underline renders as color
pccon+colors|ANSI colors for OpenBSD PC console,
bce,
- colors#8, pairs#64,
- op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ colors#8, ncv#2, pairs#64,
+ op=\E[47;30m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
pccon+base|base capabilities for OpenBSD PC console,
am, km, mc5i, msgr, npc, nxon, xenl, xon,
cols#80, it#8, lines#24,
- bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
- dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
- el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
+ el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
- rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
- tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+ rmso=\E[27m, rmul=\E[24m, rs2=\Ec$<50>, smam=\E[?7h,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
+ u7=\E[6n,
pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
- use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
+ use=pccon+sgr+acs0, use=pccon+base, use=pccon+keys,
pccon0|OpenBSD PC console with simple ASCII pseudographics,
use=pccon0-m, use=pccon+colors,
pccon-m|OpenBSD PC console without colors,
pcvtXX|pcvt vt200 emulator (DEC VT220),
am, km, mir, msgr, xenl,
it#8, vt#3,
- acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
- is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^?,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
- ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
+ ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ use=ecma+index, use=vt220+cvis,
# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
cols#80, it#8, lines#30,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
- clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
- enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
+ enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n,
invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
use=klone+color,
cols#132, lines#50, use=arm100,
# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
-# manufactured by Sharp for the Japenese market.
+# manufactured by Sharp for the Japanese market.
# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
x68k|x68k-ite|NetBSD/x68k ITE,
cols#96, lines#32,
- kclr=\E[9~, khlp=\E[28~, use=vt220,
+ kclr=\E[9~, khlp=\E[28~, use=vt220-base,
# <tv@pobox.com>:
# Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
ofcons|DNARD OpenFirmware console,
bw,
cols#80, lines#30,
- bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
+ bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=\r,
cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
- il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
+ il1=\233L, ind=\n, invis=\2338m, kbs=^H, kcub1=\233D,
kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
- kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
+ kf9=\2330p, knp=\233/, kpp=\233?, nel=\r\n, rev=\2337m,
rmso=\2330m, rmul=\2330m,
- sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m,
+ sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8
+ %;%?%p1%p3%|%t;7%;m,
sgr0=\2330m, smso=\2337m, smul=\2334m,
# NetBSD "wscons" emulator in vt220 mode.
wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
bce, msgr,
colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
- is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
- kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
- kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
+ is2=\E[r\E[25;1H, kdch1=\E[3~, kend=\E[8~, kf1=\E[11~,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
+ kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
km, use=wsvt25,
+# NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
+#
+# TERM is by default vt100 for the console, wsvt25 for other ttys.
+# Initial testing set TERM=xterm, based on comments by developers, found too
+# many differences to continue in that path. However, test-results may be
+# useful to people curious about compatibility with xterm.
+#
+# Testing with tack:
+# -----------------
+# Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
+# There is color-bleeding in the color-pairs screen.
+# Attributes do not work with color
+# Failed: vpa/hpa
+# Failed: kf1-kf4, kf13-kf48, khome, kend
+# (effectively xterm-r6 for function-keys)
+# None of the function or cursor key-modifiers are encoded.
+# Console hangs in the smm/rmm test if TERM=xterm, does not show test
+#
+# Testing with vttest:
+# -------------------
+# Identifies as vt220 with selective erase
+# (however, selective erase refers to DECSCA, SPA)
+# Does not implement vt52
+# Uses spaces to simulate double-size characters
+# Does not support 8-bit controls
+# Does not support VT220 reports
+# Does not support send/receive mode
+# Supports ECH (like rxvt)
+# Does not support DECSCA
+# Does not support any of the ISO-6429 cursor-movement
+# Does not support any of the ISO-6429 miscellaneous tests
+# (SL/SR also leave unexpected char on screen too)
+# Background does not change in menu 11.6.9 (SGR 22-27)
+# None of the xterm special features tests work
+netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
+ kbs=^?, use=wsvt25,
+
# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
# DECstation/pmax.
rcons|BSD rasterconsole,
# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
# -- the setf/setb are probably incorrect, more likely setaf/setab -TD
# -- compare with cons25w
-mgterm,
+mgterm|MGL/MGL2 MobileGear Graphic Library,
OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
colors#8, cols#80, it#8, lines#18, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
- cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
- indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
- kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
- kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
- kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
- nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
- rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
- setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
+ kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q,
+ kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
+ kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8,
+ rev=\E[7m, ri=\E[T, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
+ setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m,
+ vpa=\E[%i%p1%dd, use=ecma+index,
#### FreeBSD console entries
#
am, bce, bw, eo, msgr, npc,
colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
- cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
+ cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
- indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
- kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y,
- kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d,
- kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h,
- kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m,
- kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q,
- kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v,
- kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z,
- kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^,
- kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R,
- kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L,
- knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m,
- ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
- sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kb2=\E[E,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V,
+ kf11=\E[W, kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a,
+ kf16=\E[b, kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N,
+ kf20=\E[f, kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j,
+ kf25=\E[k, kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o,
+ kf3=\E[O, kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s,
+ kf34=\E[t, kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x,
+ kf39=\E[y, kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[,
+ kf43=\E[\\, kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`,
+ kf48=\E[{, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U,
+ khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E,
+ op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rmso=\E[m,
+ rs2=\E[x\E[m\Ec, sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?
+ %p6%t;1%;m,
+ sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, use=ecma+index,
cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
- acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
+ acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l
+ \332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~
+ \371,
use=cons25w,
cons25-debian|freebsd console with debian backspace (25-line ansi mode),
- kbs=\177, kdch1=\E[3~, use=cons25,
+ kbs=^?, kdch1=\E[3~, use=cons25,
cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
colors@, pairs@,
bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
lines#60, use=cons25-m,
cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
- acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
+ acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m
+ \204n\212q\0t\206u\207v\211w\210x\201y\230z\231~
+ \225,
use=cons25w,
cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
colors@, pairs@,
op@, rmul=\E[m, setab@, setaf@,
- sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
+ sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;30;1%;%?%p6%t;1%;m,
smul=\E[4m, use=cons25r,
cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
lines#50, use=cons25r,
lines#60, use=cons25r-m,
# ISO 8859-1 FreeBSD console
cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
- acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
+ acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k
+ \214l\215m\216n\217o\220p\221q\222r\223s\224t\225u
+ \226v\227w\230x\231y\232z\233~\237,
use=cons25w,
cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
colors@, pairs@,
cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
lines#60, use=cons25l1-m,
+# Starting with FreeBSD 8, an alternative configuration for syscons is provided,
+# which is intended to be xterm-compatible. See for example
+# http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
+# in particular scterm-teken.c
+#
+# For FreeBSD 9 and 10:
+# --------------------
+# The /etc/ttys entries for console and other ttys are all configured to set
+# TERM=xterm.
+#
+# Testing with tack:
+# There is no VT100 line-drawing (uses +'s and -'s)
+# Shifted f1-f12 give cons25 codes, rather than xterm function-keys
+#
+# Testing with vttest:
+# Menu 2 diamonds don't work, blink ditto, light background ditto
+# The terminal identifies itself as VT100 with AVO
+# There is no VT52 support
+# There is no doublesize character support
+# The terminal supports ECH (like rxvt)
+# The terminal does not support send/receive mode
+# The terminal supports all of the ISO-6429 cursor-movement
+# The terminal supports some of the ISO-6429 miscellaneous tests
+# (SL/SR also leave unexpected char on screen too)
+#
+# Considering cons25 as a base, the line-drawing mostly works, but is missing
+# the cells which happen to have ASCII control-character values:
+# - ^X arrow pointing up
+# . ^Y arrow pointing down
+# i ^Y lantern
+# ` ^D diamond
+#
+# Those are removed from this entry's acsc string to avoid confusion.
+# The resulting description provides correct line-drawing and function-keys -TD
+teken|syscons with teken,
+ bw@, mir, xenl,
+ acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q
+ \304t\303u\264v\301w\302x\263y\363z\362~\371,
+ cvvis@, hpa=\E[%i%p1%dG, hts=\EH, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[F, kent=\r,
+ kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, rmir=\E[4l, smir=\E[4h, tbc=\E[3g,
+ u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+ vpa=\E[%i%p1%dd, use=vt220+cvis, use=cons25,
+
#### 386BSD and BSD/OS Consoles
#
origpc3|origibmpc3|IBM PC 386BSD Console,
OTbs, am, bw, eo, xon,
cols#80, lines#25,
- acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
+ \263,
bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
OTbs, km,
lines#25,
- bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
- ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ bel=^G, bold=\E[=15F, cr=\r, cud1=\n, dim=\E[=8F, dl1=\E[M,
+ ht=^I, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
- knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
+ knp=\E[G, kpp=\E[I, nel=\r\n, sgr0=\E[=R,
# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
# Note, the emulator supports many of the additional console features
# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
# Bug: The <op> capability resets attributes.
bsdos-pc|IBM PC BSD/OS Console,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6
+ %t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
use=bsdos-pc-nobold,
bsdos-pc-nobold|BSD/OS PC console w/o bold,
bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
OTbs, am, eo, km, xon,
cols#80, it#8, lines#25,
- bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ bel=^G, clear=\Ec, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
- il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
- kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
- sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
+ kll=\E[F, knp=\E[G, kpp=\E[I, nel=\r\n, rc=\E8, sc=\E7,
+ sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7
+ %t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
use=klone+sgr8,
# Old names for BSD/OS PC console used in releases before 4.1.
bsdos-ppc|PowerPC BSD/OS Console,
use=bsdos-pc,
+
#### DEC VT52
# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
#
# to a crude plotting feature) -TD
vt52|dec vt52,
OTbs,
+ it#8, lines#24,
+ acsc=+h.k0affggolpnqprrss, home=\EH, kbs=^H, nel=\r\n,
+ ri=\EI, rmacs=\EG, rmkx=\E>, smacs=\EF, smkx=\E=, u8=\E/[KL],
+ use=vt50h,
+
+# This is more likely the "vt52" that you would see in emulation, i.e., no
+# keypad, no graphics.
+vt52-basic|vt52 for emulators,
cols#80, it#8, lines#24,
- acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
- cub1=\ED, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
- el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
+ bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
+ home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, nel=\r\n, ri=\EI,
#### DEC VT100 and compatibles
#
# | | | | | | | |
# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
# | | | 1-On | | | 1-50 Hz
-# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
+# | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
# | | 1-ANSI | | 1-8 Bits
# | Keyclick 0-Off | Parity 0-Off
# | 1-On | 1-On
#
# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
vt100|vt100-am|dec vt100 (w/advanced video),
- OTbs, am, mc5i, msgr, xenl, xon,
- cols#80, it#8, lines#24, vt#3,
+ OTbs, mc5i, xenl, xon,
+ vt#3,
+ csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
+ mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
+ rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;$<2>,
+ smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
+ use=vt100+4bsd, use=vt100+fnkeys,
+vt100+4bsd|dec vt100 from 4.0BSD,
+ am, msgr,
+ cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
- clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
- enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
- lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
- rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
- rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
- sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
- smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
- use=vt100+fnkeys,
+ enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
+ rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
+ smul=\E[4m$<2>, tbc=\E[3g,
vt100nam|vt100-nam|vt100 no automargins,
- am@, xenl@, use=vt100-am,
+ am@, xenl@,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
vt100-vb|dec vt100 (w/advanced video) & no beep,
- bel@, flash=\E[?5h\E[?5l, use=vt100,
+ bel@, flash=\E[?5h$<100/>\E[?5l, use=vt100,
# Ordinary vt100 in 132 column ("wide") mode.
vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
OTbs, am, xenl,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
- clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
+ clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
- kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
+ kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
rmul=\E[m$<2/>,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
OTbs, OTpt, am, mir, msgr, xenl, xon,
cols#80, lines#24, vt#3,
- OTnl=^J,
+ OTnl=\n,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
- clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
+ %p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
- smso=\E[7m, smul=\E[4m,
+ smso=\E[7m, smul=\E[4m, use=vt220+cvis,
# A much better description of the VT200/220; used to be vt220-8
# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
# designation to accommodate bug in pcvt -TD
-vt220|vt200|dec vt220,
+#
+# Here's a picture of the VT220 editing keypad:
+# +--------+--------+--------+
+# | Find | Insert | Remove |
+# +--------+--------+--------+
+# | Select | Prev | Next |
+# +--------+--------+--------+
+#
+# Still, this is a "base" entry. Software emulators commonly leave out the
+# DECTCEM feature -TD
+vt220-base|DEC VT220 as emulated,
OTbs, am, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
il=\E[%p1%dL, il1=\E[L, ind=\ED,
- is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
- kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
- kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
- kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
- lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, nel=\EE, rc=\E8, rev=\E[7m,
- ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
- rmso=\E[27m, rmul=\E[24m, rs1=\E[?3l, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
+ nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
+ rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+ rs1=\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
+ %p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
use=ansi+enq,
+vt220|vt200|dec vt220,
+ use=vt220+cvis, use=vt220-base,
vt220-w|vt200-w|DEC vt220 in wide mode,
cols#132,
rs3=\E[?3h, use=vt220,
OTbs, am, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
+ bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
- cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
+ cud=\233%p1%dB, cud1=\n, cuf=\233%p1%dC, cuf1=\233C,
cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
ich=\233%p1%d@, if=/usr/share/tabset/vt100,
il=\233%p1%dL, il1=\233L, ind=\ED,
- is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
+ is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
- kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
- kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
- kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
- kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
- kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
- knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
- lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
- nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B,
- rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m,
- rs1=\233?3l, sc=\E7,
- sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
+ kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
+ kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
+ kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
+ kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
+ kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
+ kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
+ mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
+ rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
+ rmul=\23324m, rs1=\233?3l, sc=\E7,
+ sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m
+ %?%p9%t\E(0%e\E(B%;$<2>,
sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
- smso=\2337m, smul=\2334m, tbc=\2333g,
+ smso=\2337m, smul=\2334m, tbc=\2333g, use=vt220+cvis8,
# vt220d:
# This vt220 description regards F6--F10 as the second block of function keys
vt200-js|vt220-js|dec vt200 series with jump scroll,
am, msgr,
cols#80,
- bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ bel=^G, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
ht=^I, il1=\E[L, ind=\ED,
- is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
+ is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[
+ ?25h\E>\E[m,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED, rc=\E8,
rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
+ use=vt220+cvis,
# This was DEC's vt320. Use the purpose-built one below instead
#vt320|DEC VT320 in vt100 emulation mode,
#
vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
am@,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h,
+ use=vt220-base,
# These entries are not DEC's official ones, they were purpose-built for the
# VT320. Here are the designer's notes:
am, hs, mir, msgr, xenl,
cols#80, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
- kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kbs=^?, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
+ %p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
+ use=dec+pp, use=vt220+cvis, use=vt220+keypad, use=dec+sl,
+ use=ansi+enq,
vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
am@,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
- use=vt320,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320,
# We have to init 132-col mode, not 80-col mode.
vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
cols#132, wsl#132,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
- rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
- use=vt320,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, use=vt320,
vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
am@,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
- rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
- use=vt320-w,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, use=vt320-w,
# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
# which are pretty much a superset of the VT320. They have the
# host writable status line, yet another different DRCS matrix size,
# and such, but they add the DEC Technical character set, Multiple text
# pages, selectable length pages, and the like. The difference between
-# the vt330 and vt340 is that the latter has only 2 planes and a monochrome
-# monitor, the former has 4 planes and a color monitor. These terminals
+# the vt330 and vt340 is that the former has only 2 planes and a monochrome
+# monitor, the latter has 4 planes and a color monitor. These terminals
# support VT131 and ANSI block mode, but as with much of these things,
# termcap/terminfo doesn't deal with these features.
#
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
- cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
- dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
- ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
- home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
- il1=\E[L, ind=\ED,
- is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+ blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
+ flash=\E[?5h$<200/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
+ \E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
- lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
+ lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m, rs1=\E[?3l, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
+ %p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E[2$~\E[1$}\E[1;%dH,
+ tsl=\E[2$~\E[1$}\E[1;%dH, use=vt220+cvis,
+
+# Left/right margins are supported in xterm since patch #279 (2012/05/10)
+vt420+lrmm|VT420 left/right margins,
+ mgc=\E[?69l, smglr=\E[?69h\E[%i%p1%d;%p2%ds,
# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
# (originally written with vt420 as its primary name, and usable for it).
# macros, and other features too numerous to remember right now. TERMCAP
# can only take advantage of a few of these added features.
#
-# Note that this entry is are set up in what was the standard way for GNU
+# Note that this entry is set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
+ blink=\E[5m, bold=\E[1m, clear=\E[H\E[J$<10/>, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
- el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
+ el=\E[K$<4/>, flash=\E[?5h$<200/>\E[?5l, fsl=\E[$},
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=\ED,
- is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+ is2=\E<\E\sF\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r
+ \E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
- lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
+ lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
+ %p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
+ tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl, use=vt220+cvis,
# (vt420: I removed <kf0>, it collided with <kf10>. I also restored
# a missing <sc> -- esr)
am, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
- clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
- enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
- hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<10>,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J$<50>,
+ el=\E[K$<3>, el1=\E[1K, enacs=\E)0,
+ flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
+ %p9%t\E(0%e\E(B%;$<2>,
sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- use=ansi+pp, use=dec+sl, use=ansi+enq,
+ use=ansi+pp, use=dec+sl, use=ansi+enq, use=vt220+cvis,
# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
# takes two parameters, the key and the string. Translating the key is
# application has to know it.
#
vt420pc|DEC VT420 w/PC keyboard,
- kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
- kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
- kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
- kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
- kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
- kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
- kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
- kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
- kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
- kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
- kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
- kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, khome=\E[H,
+ kdch1=^?, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
+ kf16=\E[14;2~, kf17=\E[15;2~, kf18=\E[17;2~,
+ kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, kf21=\E[20;2~,
+ kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[23~,
+ kf26=\E[24~, kf27=\E[25~, kf28=\E[26~, kf29=\E[28~,
+ kf3=\E[13~, kf30=\E[29~, kf31=\E[31~, kf32=\E[32~,
+ kf33=\E[33~, kf34=\E[34~, kf35=\E[35~, kf36=\E[36~,
+ kf37=\E[23;2~, kf38=\E[24;2~, kf39=\E[25;2~, kf4=\E[14~,
+ kf40=\E[26;2~, kf41=\E[28;2~, kf42=\E[29;2~,
+ kf43=\E[31;2~, kf44=\E[32;2~, kf45=\E[33;2~,
+ kf46=\E[34;2~, kf47=\E[35;2~, kf48=\E[36;2~, kf5=\E[15~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
pctrm=USR_TERM\:vt420pcdos\:,
- pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
+ pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>
+ %t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+
+ %d/%p2%s\E\\,
use=vt420,
vt420pcdos|DEC VT420 w/PC for DOS Merge,
lines#25,
- dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
+ dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1
+ %{127}%=%t\E\177%e%p1%c%;,
pctrm@,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
- kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kdch1=^?, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
vt525|DEC VT525,
use=vt520,
-#### VT100 emulations
+# I just got a brand new Boundless VT520 with that company's "ANSI 2011"
+# Keyboard, which replaces the old LK41R-AA keyboard.
#
+# In trying to get the function keys to work, I had to cobble my own
+# terminfo.src entry, since the existing vt520 entry doesn't include most of
+# the function keys. If I blend the entries for "vt420f" and "vt220+keypad"
+# I seem to get them all -Mike Gran
+vt520ansi|Boundless VT520 ANSI,
+ use=ansi+rca, use=vt420f, use=vt220+keypad,
+ use=ansi+tabs,
+
+#### VT100 emulations
# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
# anyone who needs PC VT340 emulation. (or anything below that level, for
# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
-# RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
+# RDBM systems, it includes ReGIS and Sixel support! I'm impressed...
# I can send the address if requested.
# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
z340|zstem vt340 terminal emulator 132col 42line,
lines#42,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
- rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
- use=vt320-w,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, use=vt320-w,
z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
am@,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
- rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
- use=z340,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, use=z340,
-# CRT is shareware. It implements some xterm features, including mouse.
-crt|crt-vt220|CRT 2.3 emulating VT220,
- bce, msgr,
- ncv@,
- hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
+# expect-5.44.1.15/example/tkterm
+# a minimal subset of a vt100 (compare with "news-unk).
+#
+# The missing "=" in smkx is not a typo (here), but an error in tkterm.
+tt|tkterm|Don Libes' tk text widget terminal emulator,
+ clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=\n, kf1=\EOP, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
+ kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
+ smso=\E[7m,
-# PuTTY 0.55 (released 3 August 2004)
-# http://www.chiark.greenend.org.uk/~sgtatham/putty/
+######## APPLE
+
+#### Terminal.app
+
+# nsterm*|Apple_Terminal - AppKit Terminal.app
#
-# Comparing with 0.51, vttest is much better (only a few problems with the
-# cursor position reports and wrapping).
+# Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
+# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
+# Server and Mac OS X operating systems. There is also a
+# "terminal.app" in GNUstep, but I believe it to be an unrelated
+# codebase and I have not attempted to describe it here.
#
-# PuTTY 0.51 (released 14 December 2000)
+# For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
+# are pretty much on your own. Use "nsterm-7-m" and hope for the best.
+# You might also try "nsterm-7" and "nsterm-old" if you suspect your
+# version supports color.
#
-# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
-# well as SCO and Atari, color palettes from Linux console). Reading the code,
-# it is intended to be VT102 plus selected features. By default, it sets $TERM
-# to xterm, which is incorrect, since several features are misimplemented:
+# To determine the version of Terminal.app you're using by running:
#
-# Alt+key always sends ESC+key, so 'km' capability is removed.
+# echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
#
-# Control responses, wrapping and tabs are buggy, failing a couple of
-# screens in vttest.
+# For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
#
-# xterm mouse support is not implemented (unrelease version may).
+# For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
#
-# Several features such as backspace/delete are optional; this entry documents
-# the default behavior -TD
+# For Apple_Terminal v71+/v100+, use "nsterm-bce".
+#
+# For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
+#
+# For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
+#
+# For all earlier versions (Apple_Terminal), try "nsterm-7-m"
+# (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
+# might work too, but really you're on your own here since these
+# systems are very obsolete and I can't test them. I do welcome
+# patches, though :).
-putty|PuTTY terminal emulator,
- am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
- colors#8, it#8, ncv#22, pairs#64, U8#1,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
- dch=\E[%p1%dP, dch1=\E[P,
- dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
- dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
- el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
- hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
- ind=^J, indn=\E[%p1%dS,
- initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
- is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
- kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~,
- kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
- kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
- kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
- kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
- kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
- kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
- ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
- rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
- rmso=\E[27m, rmul=\E[24m,
- rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
- s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
- smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq, use=xterm+sl,
-vt100-putty|Reset PuTTY to pure vt100,
- rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
- use=vt100,
-# palette is hardcoded...
-putty-256color|PuTTY 0.58 with xterm 256-colors,
- initc@, use=xterm+256color, use=putty,
+# Other Terminals:
+#
+# For GNUstep_Terminal, you're probably best off using "linux" or
+# writing your own terminfo.
-# One of the keyboard selections is "VT100+".
-# pterm (the X11 port) uses shifted F1-F10 as F11-F20
-putty-vt100|VT100+ keyboard layout,
- kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
- kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
- kf9=\EOX, use=putty,
+# For MacTelnet, you're on your own. It's a different codebase, and
+# seems to be somewhere between "vt102", "ncsa" and "xterm-color".
+
+# For iTerm.app, see "iterm".
-# Unlike xterm-sco, this leaves kmous ambiguous with kf1.
#
-# Use modifiers to obtain function keys past 12:
-# F1-F12 - normal
-# F13-F24 - shift
-# F25-F36 - control/alt
-# F37-F48 - control/shift
+# The AppKit Terminal.app descriptions all have names beginning with
+# "nsterm". Note that the statusline (-s) versions use the window
+# titlebar as a phony status line, and may produce warnings during
+# compilation as a result ("tsl uses 0 parameters, expected 1".)
+# Ignore these warnings, or even ignore these entries entirely. Apps
+# which need to position the cursor or do other fancy stuff inside the
+# status line won't work with these entries. They're primarily useful
+# for programs like Pine which provide simple notifications in the
+# status line. Please note that non-ASCII characters don't work right
+# in the status line, since Terminal.app incorrectly interprets their
+# Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
+# versions) or only accepts status lines consisting entirely of
+# characters from the first 256 Unicode positions (including C1 but
+# not C0 or DEL.)
#
-putty-sco|putty with SCO function keys,
- kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
- kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
- kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
- kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
- kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
- kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
- kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
- kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
- kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
- kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
- kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty,
-
-# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
-# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
-# (communication program) which supports:
+# The Mythology* of AppKit Terminal.app:
#
-# - Serial port connections.
-# - TCP/IP (telnet) connections.
-# - VT100 emulation, and selected VT200/300 emulation.
-# - TEK4010 emulation.
-# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
-# Quick-VAN).
-# - Scripts using the "Tera Term Language".
-# - Japanese and Russian character sets.
+# In the days of NeXTSTEP 0.x and 1.x there were two incompatible
+# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
+# shareware replacement for Terminal called "Stuart" which NeXT bought
+# and used as the basis for the Terminal.app in NeXTSTEP 2+,
+# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
+# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
+# capabilities for the early versions, but I believe that the
+# TERM_PROGRAM_VERSION may have been reset at some point.
#
-# The program does not come with terminfo or termcap entries. However, the
-# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
-# vt52 or doublesize character support; blinking is done with color). Besides
-# the HPA, VPA extensions it also implements CPL and CNL.
+# The early versions were tailored to the NeXT character set. Sometime
+# after the Apple acquisition the encoding was switched to MacRoman
+# (initially with serious altcharset bugs due to incomplete conversion
+# of the old NeXT code,) and then later to UTF-8. Also sometime during
+# or just prior to the early days of Mac OS X, the Terminal grew ANSI
+# 8-color support (initially buggy when combined with attributes, but
+# that was later fixed.) More recently, around Mac OS X version 10.3
+# or so (Terminal.app v100+) xterm-like 16-color support was added. In
+# some versions (for instance 133-1 which shipped with Mac OS X
+# version 10.4) this suffered from the <bce> bug, but that seems to
+# have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
#
-# All of the function keys can be remapped. This description shows the default
-# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
-# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
-# is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
-# kfnd Insert
-# kslt Delete
-# kich1 Home
-# kdch1 PageUp
-# kpp End
-# knp PageDown
+# In the early days of Mac OS X the terminal was fairly buggy and
+# would routinely crash under load. Many of these bugs seem to have
+# been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
+# some may still remain. This change seems to correspond to
+# Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
+# it did previously.
#
-# ANSI colors are implemented, but cannot be combined with video attributes
-# except for reverse.
+# * This may correspond with what actually happened, but I don't
+# know. It is based on guesswork, hearsay, private correspondence,
+# my faulty memory, and the following online sources and references:
#
-# No fonts are supplied with the program, so the acsc string is chosen to
-# correspond with the default Microsoft terminal font.
+# [1] "Three Scotts and a Duane" by Simson L. Garfinkel
+# http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
#
-# Tera Term recognizes some xterm sequences, including those for setting and
-# retrieving the window title, and for setting the window size (i.e., using
-# "resize -s"), though it does not pass SIGWINCH to the application if the
-# user resizes the window with the mouse.
-teraterm2.3|Tera Term Pro,
- km, xon@,
- ncv#43, vt@,
- acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
- cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
- flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
- il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
- kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
- kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
- kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
- kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
- rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
- smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
- use=klone+color, use=vt100,
-
-# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
-# to choose a Windows OEM font).
+# [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
+# https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
#
-# Testing with tack:
-# - it does not have xenl (suppress that)
-# - underline seems to work with color (modify ncv).
-# Testing with vttest:
-# - wrapping differs from vt100 (menu 1).
-# - it recognizes xterm's X10 and normal mouse tracking, but none of the
-# other flavors.
-# - it recognizes the dtterm window controls for reporting size in
-# characters and pixels.
-# - it passes SIGWINCH.
-teraterm4.59|Tera Term Pro,
- bce, xenl@,
- ncv#41,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- kmous=\E[M, use=teraterm2.3,
-
-teraterm|Tera Term,
- use=teraterm4.59,
-
-# Tested with WinNT 4.0, the telnet application assumes the screensize is
-# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
+# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
+# "nsterm" to comply with the name length and case conventions and
+# limitations of various software packages [notably Solaris terminfo
+# and UNIX.] A single Apple_Terminal alias is retained for
+# backwards-compatibility.
#
-# Other notes:
-# a) Fails tack's cup (cursor-addressing) test, though cup works well enough
-# for casual (occasional) use. Also fails several of the vttest screens,
-# but that is not unusual for vt100 "emulators".
-# b) Does not implement vt100 keypad
-# c) Recognizes a subset of vt52 controls.
-ms-vt100|MS telnet imitating dec vt100,
- lines#25,
- acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
- kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
-
-# Tested with Windows 2000, the telnet application runs in a console window,
-# also using 'Terminal' font.
+# * Added function key support (F1-F4). These only work in Terminal.app
+# version 51, hopefully the capabilities won't cause problems for people
+# using version 41.
#
-# Other notes:
-# a) This version has no function keys or numeric keypad. Unlike the older
-# version, the numeric keypad is entirely ignored.
-# b) The program sets $TERM to "ansi", which of course is inaccurate.
-ms-vt100-color|vtnt|windows 2000 ansi (sic),
- bce,
- dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
- use=ms-vt100,
+# * Added "full color" (-c) entries which support the 16-color mode in
+# version 51.
+#
+# * By default, version 51 uses UTF-8 encoding with broken altcharset
+# support, so "ASCII" (-7) entries without altcharset support were
+# added.
-# Based on comments from Federico Bianchi:
+# nsterm - AppKit Terminal.app
#
-# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
-# scheme for PF keys.
+# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
+# Terminal.app. It is a partial VT100 emulation with some xterm-like
+# extensions. This terminfo was written to describe versions 41
+# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
+# version 10.1) of Terminal.app.
#
-# and PuTTY wishlist:
+# Terminal.app runs under the Mac OS X Quartz windowing system (and
+# other AppKit-supported windowing systems.) On the Mac OS X machine I
+# use, the executable for Terminal.app is:
+# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
#
-# The modifiers are represented as the codes listed above, prefixed to
-# the normal sequences. If the modifier is pressed alone, its sequence
-# is transmitted twice in succession. If multiple modifiers apply,
-# they're transmitted in the order shift, control, alt.
+# If you're looking for a description of the full-screen system
+# console which runs under Apple's Darwin operating system on PowerPC
+# platforms, see the "xnuppc" entry instead.
#
-# Shift \E^S
-# Alt \E^A,
-# Ctrl \E^C,
-ms-vt100+|vt100+|windows XP vt100+ (sic),
- kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
- kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
- kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
- kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
- kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
- kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
- kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
- kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
- kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
- kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
- kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
- kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
- kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
- kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
- knp=\E/, kpp=\E?, use=ms-vt100-color,
-
-ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
- use=ms-vt100+,
-
-# expect-5.44.1.15/example/tkterm
-# a minimal subset of a vt100 (compare with "news-unk).
+# There were no function keys in version 41. In version 51, there are
+# four working function keys (F1, F2, F3 and F4.) The function keys
+# are included in all of these entries.
#
-# The missing "=" in smkx is not a typo (here), but an error in tkterm.
-tt|tkterm|Don Libes' tk text widget terminal emulator,
- clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
- kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
- kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
- smso=\E[7m,
-
-######## X TERMINAL EMULATORS
-#### XTERM
+# It does not support mouse pointer position reporting. Under some
+# circumstances the cursor can be positioned using option-click; this
+# works by comparing the cursor position and the selected position,
+# and simulating enough cursor-key presses to move the cursor to the
+# selected position. This technique fails in all but the simplest
+# applications.
#
-# You can add the following line to your .Xdefaults to change the terminal type
-# set by the xterms you start up to my-xterm:
+# It provides partial ANSI color support (background colors interacted
+# badly with bold in version 41, though, as reflected in :ncv:.) The
+# monochrome (-m) entries are useful if you've disabled color support
+# or use a monochrome monitor. The full color (-c) entries are useful
+# in version 51, which doesn't exhibit the background color bug. They
+# also enable an xterm-compatible 16-color mode.
#
-# *termName: my-xterm
+# The configurable titlebar is set using xterm-compatible sequences;
+# it is used as a status bar in the statusline (-s) entries. Its width
+# depends on font sizes and window sizes, but 50 characters seems to
+# be the default for an 80x24 window.
#
-# System administrators can change the default entry for xterm instances
-# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
-# case, xterm will detect and reject an invalid terminal type, falling back
-# to the default of xterm.
+# The MacRoman character encoding is used for some of the alternate
+# characters in the "MacRoman" entries; the "ASCII" (-7) entries
+# disable alternate character set support entirely, and the "VT100"
+# (-acs) entries rely instead on Terminal.app's own buggy VT100
+# graphics emulation, which seems to think the character encoding is
+# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
+# are useful in Terminal.app version 51, which supports UTF-8 and
+# other ASCII-compatible character encodings but does not correctly
+# implement VT100 graphics; once VT100 graphics are correctly
+# implemented in Terminal.app, the "VT100" (-acs) entries should be
+# usable in any ASCII-compatible character encoding [except perhaps
+# in UTF-8, where some experts argue for disallowing alternate
+# characters entirely.]
+#
+# Terminal.app reports "vt100" as the terminal type, but exports
+# several environment variables which may aid detection in a shell
+# profile (i.e. .profile or .login):
+#
+# TERM=vt100
+# TERM_PROGRAM=Apple_Terminal
+# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
+# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
+#
+# For example, the following Bourne shell script would detect the
+# correct terminal type:
+#
+# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
+# then
+# export TERM
+# if [ :"$TERM_PROGRAM_VERSION" = :41 ]
+# then
+# TERM="nsterm-old"
+# else
+# TERM="nsterm-c-7"
+# fi
+# fi
#
+# In a C shell derivative, this would be accomplished by:
+#
+# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
+# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
+# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
+# setenv TERM "nsterm-old"
+# else
+# setenv TERM "nsterm-c-7"
+# endif
+# endif
+# endif
-# X10/6.6 11/7/86, minus alternate screen, plus (csr)
-# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
-# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
-# as these seem not to work -- esr)
-x10term|vs100-x10|xterm terminal emulator (X10 window system),
- OTbs, am, km, mir, msgr, xenl, xon,
- cols#80, it#8, lines#65,
- bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
- cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
- il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
- kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
- rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
- smso=\E[7m, smul=\E[4m,
-# Compatible with the R5 xterm
-# (from the XFree86 3.2 distribution, <blink=@> removed)
-# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
-# corrected typos in rs2 string - TD
-# added u6-u9 -TD
-xterm-r5|xterm R5 version,
- OTbs, am, km, msgr, xenl,
- cols#80, it#8, lines#24,
- bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
- kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
- kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
- kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
- rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
- rmul=\E[m,
- rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
- sc=\E7,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
- sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, use=vt100+enq,
-# Compatible with the R6 xterm
-# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
-# added khome/kend, hts based on the R6 xterm code - TD
-# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
-# for compatibility with other emulators).
-xterm-r6|xterm-old|xterm X11R6 version,
- OTbs, am, km, mir, msgr, xenl,
+# The '+' entries are building blocks
+nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
+ am, bw, msgr, xenl, xon,
cols#80, it#8, lines#24,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
- il1=\E[L, ind=^J,
- is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
- kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
- kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
- kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
- rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
- rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
- rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
- sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- use=vt100+enq,
-# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
-# The name has been changed and some aliases have been removed.
-xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
- OTbs, am, bce, km, mir, msgr, xenl, XT,
- cols#80, it#8, lines#24, ncv@,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
- flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
- ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
- il1=\E[L, ind=^J,
- is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
- kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
- kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
- kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
- kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
- kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
- kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
- kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
- memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
- rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
- rmso=\E[27m, rmul=\E[24m, rs1=^O,
- rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
- setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
- smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
- use=ecma+color, use=vt220+keypad,
-
-# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
-# codes for F1-F4 except while in VT220 mode.
-xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
+ dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
+ ind=\n, invis=\E[8m, kbs=^?, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
+ rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;%?%p7%t;8%;m,
+ sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
-# This version was released in XFree86 3.3.3 (November 1998).
-# Besides providing printer support, it exploits a new feature that allows
-# xterm to use terminfo-based descriptions with the titeInhibit resource.
-# -- the distribution contained incorrect khome/kend values -TD
-xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
- blink=\E[5m, ich1@, invis=\E[8m,
- is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
- rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
- rs2=\E[!p\E[?3;4l\E[4l\E>,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- smcup=\E[?1048h\E[?1047h, use=ansi+pp,
- use=xterm-xf86-v33,
+nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ enacs=\E(B\E)0, rmacs=^O,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, use=nsterm+7,
-# This version was released in XFree86 4.0.
-xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
- npc,
- kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
- kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
- ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
- kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
- kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
- kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
- kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
- kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
- kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
- kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
- kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
- kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
- kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
- kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
- smcup=\E[?1049h, use=xterm-xf86-v333,
+nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
+ acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i
+ \360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{
+ \271|\255}\243~\245,
+ enacs=\E(B\E)0, rmacs=^O,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, use=nsterm+7,
-# This version was released in XFree86 4.3.
-xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
- kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
- kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
- kbeg@,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- use=xterm-xf86-v40,
+# compare with xterm+sl-twm
+nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
+ wsl#50, use=xterm+sl-twm,
-# This version was released in XFree86 4.4.
-xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
- cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS,
- rin=\E[%p1%dT, use=xterm-xf86-v43,
+nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
+ op=\E[0m, use=ibm+16color,
-xterm-xfree86|xterm terminal emulator (XFree86),
- use=xterm-xf86-v44,
+nsterm+c41|AppKit Terminal.app v41 color support,
+ colors#8, ncv#37, pairs#64,
+ op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-# This version reflects the current xterm features.
-xterm-new|modern xterm terminal emulator,
- npc,
- indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
- rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
- use=xterm-basic,
+# These are different combinations of the building blocks
-# This fragment is for people who cannot agree on what the backspace key
-# should send.
-xterm+kbs|fragment for backspace key,
- kbs=^H,
-#
-# This fragment describes as much of XFree86 xterm's "pc-style" function
-# keys as will fit into terminfo's 60 function keys.
-# From ctlseqs.ms:
-# Code Modifiers
-# ---------------------------------
-# 2 Shift
-# 3 Alt
-# 4 Shift + Alt
-# 5 Control
-# 6 Shift + Control
-# 7 Alt + Control
-# 8 Shift + Alt + Control
-# ---------------------------------
-# The meta key may also be used as a modifier in this scheme, adding another
-# bit to the parameter.
-xterm+pcfkeys|fragment for PC-style fkeys,
- use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
- use=xterm+pce2,
-#
-xterm+noapp|fragment with cursor keys in normal mode,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
- khome=\E[H,
+# ASCII charset (-7)
+nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
+ use=nsterm+7,
-xterm+app|fragment with cursor keys in application mode,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
- khome=\EOH,
-#
-# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
-# and revised in patch #167 (2002/8/24). Some other terminal emulators copied
-# the earlier scheme, as noted in the "use=" clauses in this file.
-#
-# The original assignments from patch #94 for cursor-keys had some technical
-# issues:
-#
-# A parameter for a function-key to represent a modifier is just more
-# bits. But for a cursor-key it may change the behavior of the
-# application. For instance, emacs decodes the first parameter of a
-# cursor-key as a repeat count.
-#
-# A parameterized string should (really) not begin with SS3 (\EO).
-# Rather, CSI (\E[) should be used.
-#
-# For these reasons, the original assignments were deprecated. For
-# compatibility reasons, they are still available as a setting of xterm's
-# modifyCursorKeys resource. These fragments list the modified cursor-keys
-# that might apply to xterm+pcfkeys with different values of that resource.
-xterm+pcc3|fragment with modifyCursorKeys:3,
- kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
- kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
- kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
- kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
- kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
- kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
- kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
- kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
- kUP7=\E[>1;7A,
+nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
+ use=nsterm+s, use=nsterm+7,
-xterm+pcc2|fragment with modifyCursorKeys:2,
- kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
- kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
- kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
- kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
- kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
- kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
- kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
+nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
+ use=nsterm+c41, use=nsterm+7,
-xterm+pcc1|fragment with modifyCursorKeys:1,
- kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
- kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
- kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
- kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
- kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
- kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
+nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
+ use=nsterm+c, use=nsterm+7,
-xterm+pcc0|fragment with modifyCursorKeys:0,
- kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
- kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
- kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
- kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
- kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
- kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
+nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
+ use=nsterm+s, use=nsterm+c41, use=nsterm+7,
-#
-# Here are corresponding fragments from xterm patch #216:
-#
-xterm+pcf0|fragment with modifyFunctionKeys:0,
- kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
- kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
- kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
- kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
- kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
- kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
- kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
- kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
- kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
- kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
- kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
- kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
- kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
- kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
- kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
- kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
- kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
-#
-xterm+pcf2|fragment with modifyFunctionKeys:2,
- kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
- kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
- kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
- kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
- kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
- kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
- kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
- kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
- kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
- kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
- kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
- kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
- kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
- kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
- kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
- kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
- kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~,
-#
-# Chunks from xterm #230:
-xterm+pce2|fragment with modifyCursorKeys:2,
- kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
- kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
- kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
- kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
- kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
- kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
- kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
- kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
- kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
- kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
- kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
- use=xterm+edit,
+nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
+ use=nsterm+s, use=nsterm+c, use=nsterm+7,
-xterm+edit|fragment for 6-key editing-keypad,
- kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
- use=xterm+pc+edit,
+# VT100 alternate-charset (-acs)
+nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
+ use=nsterm+acs,
-xterm+pc+edit|fragment for pc-style editing keypad,
- kend=\E[4~, khome=\E[1~,
+nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
+ use=nsterm+s, use=nsterm+acs,
-xterm+vt+edit|fragment for vt220-style editing keypad,
- kfnd=\E[1~, kslt=\E[4~,
+nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
+ use=nsterm+c41, use=nsterm+acs,
-#
-# Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
-# Alternatively, the same scheme with old-style function keys as in xterm-r6
-# is shown here (because that is used in mrxvt and mlterm):
-xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
- kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
- kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
- kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
- kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
- kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
- kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
- kf63=\E[13;4~, use=xterm+pcf2,
-#
-# This chunk is used for building the VT220/Sun/PC keyboard variants.
-xterm-basic|modern xterm terminal emulator - common,
- OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
- colors#8, cols#80, it#8, lines#24, pairs#64,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
- flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
- ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
- ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
- kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8,
- rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
- rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>,
- rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
- rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
- setaf=\E[3%p1%dm,
- setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
- sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
- smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=ansi+pp,
- use=xterm+kbs, use=vt100+enq,
+nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
+ use=nsterm+c, use=nsterm+acs,
-# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
-# In retrospect, something like xterm-r6 was intended here -TD
-xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
- rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
+nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
+ use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
-# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
-# If configured to support 88- or 256-colors (which is fairly common in 2009),
-# xterm also recognizes the control sequences for initc -TD
-xterm-16color|xterm with 16 colors like aixterm,
- ccc,
- initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
- use=ibm+16color, use=xterm-new,
+nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
+ use=nsterm+s, use=nsterm+c, use=nsterm+acs,
-# 256-colors is a compile-time feature of XFree86 xterm beginning with
-# patch #111 (1999/7/10) -TD
-xterm+256color|xterm 256-color feature,
- ccc,
- colors#256, pairs#32767,
- initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
- setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
- setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
- setb@, setf@,
+# MacRoman charset
+nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
+ use=nsterm+mac,
-# 88-colors is a compile-time feature of XFree86 xterm beginning with
-# patch #115 (1999/9/18) -TD
+nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
+ use=nsterm+s, use=nsterm+mac,
+
+nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
+ use=nsterm+c41, use=nsterm+mac,
+
+nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
+ use=nsterm+c, use=nsterm+mac,
+
+nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
+ use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
+
+nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
+ use=nsterm+s, use=nsterm+c, use=nsterm+mac,
+
+# In Mac OS X version 10.5 the format of the preferences has changed
+# and a new, more complex technique is needed, e.g.,
#
-# Note that the escape sequences used are the same as for 256-colors - xterm
-# has a different table of default color resource values. If built for
-# 256-colors, it can still handle an 88-color palette by using the initc
-# capability.
+# python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
+# "NSUserDefaults");ud=NSUserDefaults.alloc();
+# ud.init();prefs=ud.persistentDomainForName_(
+# "com.apple.Terminal");prefs["Window Settings"][
+# prefs["Default Window Settings"]]["TerminalType"
+# ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
+# "com.apple.Terminal")' nsterm-16color
#
-# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
-# which support the xterm+256color feature support the associated initc
-# capability. So it is cancelled in the entries which use this and/or the
-# xterm+256color block.
+# and it is still not settable from the preferences dialog. This is
+# tracked under rdar://problem/7365108 and rdar://problem/7365134
+# in Apple's bug reporter.
#
-# The default color palette for the 256- and 88-colors are different. A
-# given executable will have one palette (perhaps compiled-in). If the program
-# supports xterm's control sequence, it can be programmed using initc.
-xterm+88color|xterm 88-color feature,
- colors#88, pairs#7744, use=xterm+256color,
-
-# These variants of XFree86 3.9.16 xterm are built as a configure option.
-xterm-256color|xterm with 256 colors,
- use=xterm+256color, use=xterm-new,
-xterm-88color|xterm with 88 colors,
- use=xterm+88color, use=xterm-256color,
-
-# These two are used to demonstrate the any-event mouse support, i.e., by
-# using an extended name "XM" which tells ncurses to put the terminal into
-# a special mode when initializing the xterm mouse.
-xterm-1002|testing xterm-mouse,
- XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
-xterm-1003|testing xterm-mouse,
- XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
+# In OS X 10.5 (Leopard) the TERM which can be set in the preferences dialog
+# defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt,
+# vt52, vt100, vt102 and xterm.
+nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
+ bw@, mir, npc,
+ dch=\E[%p1%dP, dch1=\E[P, flash=\E[?5h$<200/>\E[?5l,
+ hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~,
+ kend=\E[F, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[22~, kf19=\E[33~, kf20=\E[34~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[H, knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8,
+ rmir=\E[4l, smcup=\E7\E[?47h, smir=\E[4h,
+ vpa=\E[%i%p1%dd, kLFT5=\E[5D, kRIT5=\E[5C,
+ use=nsterm-c-s-acs, use=vt220+cvis,
-# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
-# asked for some of xterm's advanced features to be added to its terminfo
-# entry. It defines extended capabilities not found in standard terminfo or
-# termcap. These are useful in tmux, for instance, hence the name.
+# The versions of Terminal.app in Mac OS X version 10.3.x seem to have
+# the background color erase feature. The newer version 240.2 in Mac OS X
+# version 10.5 does not.
#
-# One caveat in adding extended capabilities in ncurses is that if the names
-# are longer than two characters, then they will not be visible through the
-# termcap interface.
+# This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
+# and D P Schreber comparing to nsterm-c-s-acs.
#
-# Ms modifies the selection/clipboard. Its parameters are
-# p1 = the storage unit (clipboard, selection or cut buffer)
-# p2 = the base64-encoded clipboard content.
-#
-# Ss is used to set the cursor style as described by the DECSCUSR
-# function to a block or underline.
-# Se resets the cursor style to the terminal power-on default.
-#
-# Cs and Cr set and reset the cursor colour.
-xterm+tmux|advanced xterm features used in tmux,
- Cr=\E]112\007, Cs=\E]12;%p1%s\007,
- Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
+# In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
+# can be set in Terminal.app, e.g.,
+#
+# defaults write com.apple.Terminal TermCapString nsterm-bce
+#
+# and that it is not set in Terminal's preferences dialog.
+#
+# Modified for OS X 10.8, omitting bw based on testing with tack -TD
+#
+# Notes:
+# * The terminal description matches the default settings.
+# * The keyboard is configurable via a dialog.
+# * By default khome, kend, knext and kprev are honored only with a
+# shift-modifier.
+# * There are bindings for control left/right arrow (but not up/down).
+# Added those to nsterm-16color, which is the version used for OS X 10.6
+# * "Allow VT100 application keypage mode" is by default disabled.
+# There is no way to press keypad-comma unless application mode is enabled
+# and used.
+# * 132-column mode stopped working during vttest's tests. Consider it broken.
+# * CHT, REP, SU, SD are buggy.
+# * ECH works (also in Leopard), but is not used here for compatibility.
+# * The terminal preferences dialog replaces xterm-color by xterm-16color and
+# xterm-256color. However, it adds "nsterm", so it is possible to use the
+# nsterm entry from this file to override the MacPorts (20110404) or
+# system (20081102) copy of this file.
+# + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
+# dialog defaults to xterm-256color. Alternative selections are ansi,
+# dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However,
+# the menu says "Declare terminal as" without promising to actually emulate
+# the corresponding terminals. Indeed, changing TERM does not affect the
+# emulation itself. This means that
+# + the function-keys do not match for dtterm for kf1-kf4 as well as
+# khome/kend
+# + the color model is the same for each setting of TERM (does not match
+# ansi or dtterm).
+# + the shift/control/meta key modifiers from rxvt and xterm variants are not
+# recognised except for a few special cases, i.e., kRIT5 and kLFT5.
+# + the vt52 emulation does not give a usable shell because screen-clearing
+# does not work as expected.
+# + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
+# + OSX 10.9 (Yosemite) added more extended keys in the default configuration
+# as well as unmasking F10 (which had been used in the window manager). Those
+# keys are listed in this entry.
+nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
+ bce, use=nsterm-16color,
+
+# This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
+# TERM_PROGRAM_VERSION=309
+# Earlier reports state that these differences also apply to OS X 10.7 (Lion),
+# TERM_PROGRAM_VERSION=303
+nsterm-build309|Terminal.app in OS X 10.8,
+ use=xterm+256setaf, use=nsterm-bce,
+
+# removed bogus kDC7 -TD
+nsterm-build326|Terminal.app in OS X 10.9,
+ kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
+ kf18=\E[32~, kDC5=\E[3;5~, kLFT3=\Eb, kLFT5=\E[1;5D,
+ kRIT3=\Ef, kRIT5=\E[1;5C, use=nsterm-build309,
+
+# actually "343.7"
+nsterm-build343|Terminal.app in OS X 10.10,
+ kend=\EOF, khome=\EOH, use=nsterm-build326,
+
+# reviewed Terminal.app in El Capitan (version 2.6 build 361) -TD
+# Using vttest:
+# + no vt52 mode for cursor keys, though vt52 screen works in vttest
+# + f1-f4 map to pf1-pf4
+# + no vt220 support aside from DECTCEM and ECH
+# + there are no protected areas. Forget about anything above vt220.
+# + in ECMA-48 cursor movement, VPR and HPR fail. Others work.
+# + vttest color 11.6.4 and 11.6.5 (bce for ED/EL and ECH/indexing) are bce
+# + but bce fails for 11.6.7.2 (test repeat).
+# + SD (11.6.7.3) also fails, but SL/SR/SU work.
+# + 11.6.6 (test insert/delete char/line with bce) has several failures.
+# + normal (not X10 or Highlight tracking) mouse now works.
+# + mouse any-event works
+# + mouse button-event works
+# + in alternate screen:
+# mode 47/48 work
+# mode 1047 fails to restore cursor position (do not use)
+# mode 1049 fails to restore screen contents (do not use)
+# + dtterm window-modify operations work (some messages are not printed)
+# + dtterm window-report gives size of window in characters/pixels as
+# well as state of window.
+# Using tack:
+# + there is no difference between cnorm/cvvis
+# + has dim/invis/blink (no protect of course)
+# + most function keys with shift/control modifiers give beep
+# (user can configure, but out-of-the-box is what I record)
+# + shift-F5 is \E[25~ through shift-F12 is \E[34~ (skips \E[30~ between
+# F8 and F9).
+# + kLFT5/kRIT5 work, but not up/down with control-modifier
+# + kLFT/kRIT work, but not up/down with shift-modifier
+# + there are a few predefined bindings with Alt, but no clear pattern.
+# + uses alt-key as UTF-8 "meta" something like xterm altSendsEscape
+# Using ncurses test-program with xterm-new:
+# + no italics
+# Using xterm's scripts:
+# + palette for 256-colors is hardcoded.
+# + no support for "dynamic colors"
+# + no support for tcap-query.
+nsterm-build361|Terminal.app in OS X 10.11,
+ XT,
+ kmous=\E[M, use=nsterm-build343,
-# This is another variant, for XFree86 4.0 xterm (T.Dickey)
-# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
-# To use it, your decTerminalID resource must be set to 200 or above.
+# reviewed Terminal.app in High Sierra (version 2.8 build 400) -TD
+# Comparing with build361, little has changed, except that italics work.
+# Direct-color is not supported, by the way.
#
-# HTS \E H \210
-# RI \E M \215
-# SS3 \E O \217
-# CSI \E [ \233
+# Improved rmso/rmul -TD
+nsterm-build400|Terminal.app in OS X 10.13,
+ rmso=\E[27m, rmul=\E[24m, use=xterm+sm+1006,
+ use=ecma+italics, use=nsterm-build361,
+
+# This is an alias which should always point to the "current" version
+nsterm|nsterm-256color|Apple_Terminal|AppKit Terminal.app,
+ use=nsterm-build400,
+
+#### iTerm, iTerm2
+
+# iTerm 0.10
+#
+# iTerm.app from http://iterm.sourceforge.net/ is an alternative (and more
+# featureful) terminal emulator for Mac OS X. It is similar enough in
+# capabilities to nsterm-16color that I have derived this description from that
+# one, but as far as I know they share no code. Many of the features are
+# user-configurable, but I attempt only to describe the default configuration
+# (B. Sittler).
+#
+# According to its documentation, iTerm uses terminfo to obtain function key
+# definitions. For example, if it is started with TERM=xterm, it uses key
+# definitions from that terminal description from the local OSX machine. Those
+# $TERM settings may be augmented using the bookmark and profile dialogs.
+# However, the behavior seen with tack does not agree with either the terminfo
+# description or the function keys in its "xterm" profile.
+#
+# NOTES:
+# with vttest:
+# reports primary DA as VT100 with AVO: \E[?1;2c
+# reports secondary DA as "\E[>0;95;c"
+# supports blink and underline
+# displays bold text as red
+# recognizes all dtterm controls for modifying/querying window
+# resizing via escape sequence is very slow
+# supports X11R5 mouse (no X10) and XFree86 mouse (button- and event-tracking)
+# supports X11R5 alternate screen and XFree86 1049 (no 1047/1048)
+# supports CHA, VPA, VPR, but no other ECMA-48 cursor movement such as HPA
+# with tack:
+# .
+# with ncurses test-program:
+# ncurses 'k' has problem in second screen; light background does not fill
+# with xterm scripts
+# can display/alter xterm-256color cube
+# can display/alter xterm-88color cube
+iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
+ am, bce, hs, mir, msgr, npc, xenl, xon,
+ cols#80, it#8, lines#24, wsl#50,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h$<200/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=\n, kLFT=\E[1;2D, kRIT=\E[1;2C, kbs=^?,
+ kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kend=\EOF, kent=\EOM, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\EOH, knp=\E[6~, kpp=\E[5~, op=\E[0m, rc=\E8,
+ rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
+ rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
+ rmso=\E[m, rmul=\E[m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
+ %p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, vpa=\E[%i%p1%dd, kEND5=\E[1;5F, kHOM5=\E[1;5H,
+ use=ansi+enq, use=xterm+sl-twm, use=vt100+keypad,
+ use=xterm+x11mouse, use=xterm+256setaf, use=vt220+cvis,
+
+# iTerm2 3.0.15
+#
+# https://www.iterm2.com/
+# https://github.com/gnachman/iTerm2
+# ~/Library/Preferences/com.googlecode.iterm2.plist
+# "iTerm" stalled in 2009. A different set of developers began "iTerm2".
+#
+# NOTES:
+# with vttest:
+# reports primary DA as VT100 with AVO: \E[?1;2c
+# reports secondary DA as "\E[>0;95;0c"
+# numeric keypad application mode does not work
+# by default, dtterm window-modifications are ignored
+# by default, dtterm window-reports return, but icon as "L", window as "l"
+# supports SD/SU, no REP, SL, SR
+# supports CBT, CHA, VPA, CNL, CPL, VPR (no HPA, CHT, HPR)
+# no improvement to XFree86 1047/1048 modes
+# with tack:
+# in meta-mode, imitates xterm, sending UTF-8
+# special-key modifiers based on xterm use incompatible default for alt/meta
+# with ncurses test-program:
+# no italics
+# no improvement to ncurses 'k'
+# with xterm scripts:
+# acolors.sh works
+#
+# Italic text did not work initially, apparently because upgrading did not
+# add/change that preference (set in Preferences, Profiles, Text). A new
+# install of iTerm 3.0.15 provides italics by default (blinking text is an
+# option in the preferences dialog).
+#
+# 2018/01/21: found xterm+sm+1006 did not work with version 3.1.5
+# 2018/05/19: xterm+sm+1006 seems to work with 3.1.6beta -TD
+iTerm2.app|iterm2|terminal emulator for Mac OS X,
+ blink=\E[5m, cbt=\E[Z, dim=\E[2m, kEND=\E[1;2F,
+ kHOM=\E[1;2H, ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf13=\E[1;2P,
+ kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~,
+ kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~,
+ kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
+ kf24=\E[24;2~, kind=\E[1;2B, kri=\E[1;2A, nel=\EE,
+ op=\E[39;49m, rmso=\E[27m, rmul=\E[24m,
+ rs2=\E[!p\E[?3;4l\E[4l\E>\E[?1000l,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;m%?%p9%t\016%e\017%;,
+ kDN3=\E\E[B, kDN4=\E[1;10B, kDN5=\E[1;5B, kDN6=\E[1;6B,
+ kEND3=\E[1;9F, kEND4=\E[1;10F, kEND6=\E[1;6F,
+ kEND7=\E[1;13F, kEND8=\E[1;14F, kHOM3=\E[1;9H,
+ kHOM4=\E[1;10H, kHOM6=\E[1;6H, kHOM7=\E[1;13H,
+ kHOM8=\E[1;14H, kLFT3=\E\E[D, kLFT4=\E[1;10D,
+ kLFT5=\E[1;5D, kLFT6=\E[1;6D, kNXT3=\E\E[6~,
+ kPRV3=\E\E[5~, kRIT3=\E\E[C, kRIT4=\E[1;10C,
+ kRIT5=\E[1;5C, kRIT6=\E[1;6C, kUP3=\E\E[A, kUP4=\E[1;10A,
+ kUP5=\E[1;5A, kUP6=\E[1;6A, use=ecma+index,
+ use=xterm+alt+title, use=ecma+italics, use=iterm,
+
+# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
#
-xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
- OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
- colors#8, cols#80, it#8, lines#24, pairs#64,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
- civis=\233?25l, clear=\233H\2332J,
- cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
- cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
- cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
- cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
- dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
- ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
- flash=\233?5h$<100/>\233?5l, home=\233H,
- hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
- il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
- is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
- ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
- kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
- kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
- kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
- kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
- kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
- kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
- kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
- kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
- knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
- meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
- ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
- rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
- rs1=\Ec,
- rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
- sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
- setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
- sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
- smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
- smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
- u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
- use=xterm+kbs,
-
-xterm-hp|xterm with hpterm function keys,
- kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
- kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
- knp=\ES, kpp=\ET, use=xterm-basic,
-
-xterm-sco|xterm with SCO function keys,
- kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
- kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
- kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
- kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
- kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
- kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
- kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
- kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
- kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
- kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
- kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
- use=xterm-basic,
-
-# The xterm-new description has all of the features, but is not completely
-# compatible with vt220. If you are using a Sun or PC keyboard, set the
-# sunKeyboard resource to true:
-# + maps the editing keypad
-# + interprets control-function-key as a second array of keys, so a
-# 12-fkey keyboard can support vt220's 20-fkeys.
-# + maps numeric keypad "+" to ",".
-# + uses DEC-style control sequences for the application keypad.
+# On PowerPC platforms, Apple's Darwin operating system uses a
+# full-screen system console derived from a NetBSD framebuffer
+# console. It is an ANSI-style terminal, and is not really VT-100
+# compatible.
#
-xterm-vt220|xterm emulating vt220,
- kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
- kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
- kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
- use=xterm+app, use=xterm+edit, use=xterm-basic,
- use=vt220+keypad,
-
-xterm-vt52|xterm emulating dec vt52,
- cols#80, it#8, lines#24,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
- home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
- use=xterm+kbs,
-
-xterm-noapp|xterm with cursor keys in normal mode,
- rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
- use=xterm,
-
-xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
- lines#24, use=xterm,
-
-# This is xterm for ncurses.
-xterm|xterm terminal emulator (X Window System),
- use=xterm-new,
-
-# This entry assumes that xterm's handling of VT100 SI/SO is disabled by
-# setting the vt100Graphics resource to false.
-xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
- U8#1, use=xterm,
-
-# These building-blocks allow access to the X titlebar and icon name as a
-# status line. There are a few problems in using them in entries:
+# Under Mac OS X, this is the system console driver used while in
+# single-user mode [reachable by holding down Command-S during the
+# boot process] and when logged in using console mode [reachable by
+# typing ">console" at the graphical login prompt.]
#
-# a) tsl should have a parameter to denote the column on which to transfer to
-# the status line.
-# b) the "0" code for xterm updates both icon-title and window title. Some
-# window managers such as twm (and possibly window managers descended from
-# it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
-# don't want to mess with icon-name when using those window managers.
-xterm+sl|access X title line and icon name,
- hs,
- dsl=\E]0;\007, fsl=^G, tsl=\E]0;,
-xterm+sl-twm|access X title line (pacify twm-descended window managers),
- hs,
- dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
-
-# In contrast, this block can be used for a DEC vt320 and up. There are two
-# controls used.
+# If you're looking for a description of the Terminal.app terminal
+# emulator which runs under the Mac OS X Quartz windowing system (and
+# other AppKit-supported windowing systems,) see the "nsterm"
+# entry instead.
#
-# DECSASD (select active status display)
-# \E[0$} Main display
-# \E[1$} Status line
+# NOTE: Under Mac OS X version 10.1, the default login window does not
+# prompt for user name, instead requiring an icon to be selected from
+# a list of known users. Since the special ">console" login is not in
+# this list, you must make one of two changes in the Login Window
+# panel of the Login section of System Prefs to make the special
+# ">console" login accessible. The first option is to enable 'Show
+# "Other User" in list for network users', which will add a special
+# "Other..." icon to the graphical login panel. Selecting "Other..."
+# will present the regular graphical login prompt. The second option
+# is to change the 'Display Login Window as:' setting to 'Name and
+# password entry fields', which replaces the login panel with a
+# graphical login prompt.
#
-# DECSSDT (select status line type)
-# \E[0$~ No status line
-# \E[1$~ Indicator status line
-# \E[2$~ Host-writable status line
+# There are no function keys, at least not in Darwin 1.3.
#
-# The building block assumes that the terminal always shows something at the
-# status line (either the indicator, or status line). That is because if no
-# status line is used, then the terminal makes that line part of the user
-# window, changing its size without notice.
+# It has no mouse support.
#
-# Because there is no "esl" (enable status line) capability, the "tsl"
-# capability ensures that the status line is host-writable. A DEC terminal
-# will clear the status line when changing from indicator to host-writable
-# mode.
+# It has full ANSI color support, and color combines correctly with
+# all three supported attributes: bold, inverse-video and underline.
+# However, bold colored text is almost unreadable (bolding is
+# accomplished using shifting and or-ing, and looks smeared) so bold
+# has been excluded from the list of color-compatible attributes
+# [using (ncv)]. The monochrome entry (-m) is useful if you use a
+# monochrome monitor.
#
-# Once on the status line, the row part of cursor addressing is ignored. Since
-# tsl expects a parameter (to specify the column), the shortest addressing that
-# can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
+# There is one serious bug with this terminal emulation's color
+# support: repositioning the cursor onto a cell with non-matching
+# colors obliterates that cell's contents, replacing it with a blank
+# and displaying a colored cursor in the "current" colors. There is
+# no complete workaround at present [other than using the monochrome
+# (-m) entries,] but removing the (msgr) capability seemed to help.
#
-dec+sl|DEC VTxx status line,
- eslok, hs,
- dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
-
+# The "standout" chosen was simple reverse-video, although a colorful
+# standout might be more aesthetically pleasing. Similarly, the bold
+# chosen is the terminal's own smeared bold, although a simple
+# color-change might be more readable. The color-bold (-b) entries
+# uses magenta colored text for bolding instead. The fancy color (-f
+# and -f2) entries use color for bold, standout and underlined text
+# (underlined text is still underlined, though.)
#
-# The following xterm variants don't depend on your base version
+# Apparently the terminal emulator does support a VT-100-style
+# alternate character set, but all the alternate character set
+# positions have been left blank in the font. For this reason, no
+# alternate character set capabilities have been included in this
+# description. The console driver appears to be ASCII-only, so (enacs)
+# has been excluded [although the VT-100 sequence does work.]
#
-# xterm with bold instead of underline
-xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
- sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
- smso=\E[7m, smul=\E[1m, use=xterm,
+# The default Mac OS X and Darwin installation reports "vt100" as the
+# terminal type, and exports no helpful environment variables. To fix
+# this, change the "console" entry in /etc/ttys from "vt100" to
+# "xnuppc-WxH", where W and H are the character dimensions of your
+# console (see below.)
+#
+# The font used by the terminal emulator is apparently one originally
+# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
+# file includes descriptions for the following geometries:
+#
+# Pixels Characters Entry Name (append -m for monochrome)
+# -------------------------------------------------------------------
+# 640x400 80x25 xnuppc-80x25
+# 640x480 80x30 xnuppc-80x30
+# 720x480 90x30 xnuppc-90x30
+# 800x600 100x37 xnuppc-100x37
+# 896x600 112x37 xnuppc-112x37
+# 1024x640 128x40 xnuppc-128x40
+# 1024x768 128x48 xnuppc-128x48
+# 1152x768 144x48 xnuppc-144x48
+# 1280x1024 160x64 xnuppc-160x64
+# 1600x1024 200x64 xnuppc-200x64
+# 1600x1200 200x75 xnuppc-200x75
+# 2048x1536 256x96 xnuppc-256x96
+#
+# The basic "xnuppc" entry includes no size information, and the
+# emulator includes no reporting capability, so you'll be at the mercy
+# of the TTY device (which reports incorrectly on my hardware.) The
+# color-bold entries do not include size information.
-# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
-xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
- ich@, ich1@, use=xterm,
-# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
-xterm1|xterm terminal emulator ignoring the alternate screen buffer,
- rmcup@, smcup@, use=xterm,
+# The '+' entries are building blocks
+xnuppc+basic|Darwin PowerPC Console basic capabilities,
+ am, bce, mir, xenl,
+ it#8,
+ bold=\E[1m, clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^?,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
+ rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
+ rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
+ sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
-#### KTERM
-# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
-# (kterm should not invoke DEC Graphics as the alternate character set
-# -- Kenji Rikitake)
-# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
-# -- MATSUMOTO Shoji)
-# kterm implements acsc via built-in table of X Drawable's
-kterm|kterm kanji terminal emulator (X window system),
- eslok, hs, XT,
- ncv@,
- acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
- csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
- kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
- sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
- tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
-kterm-color|kterm-co|kterm with ANSI colors,
- ncv@, use=kterm, use=ecma+color,
+xnuppc+c|Darwin PowerPC Console ANSI color support,
+ colors#8, ncv#32, pairs#64,
+ op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-#### Other XTERM
-# These (xtermc and xtermm) are distributed with Solaris. They refer to a
-# variant of xterm which is apparently no longer supported, but are interesting
-# because they illustrate SVr4 curses mouse controls - T.Dickey
-xtermm|xterm terminal emulator (monocrome),
- OTbs, am, km, mir, msgr, xenl,
- btns#3, cols#80, it#8, lines#24,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
- home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
- kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
- kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
- knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
- rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
- rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
- smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
-
-xtermc|xterm terminal emulator (color),
- colors#8, ncv#7, pairs#64,
- op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- use=xtermm,
+xnuppc+b|Darwin PowerPC Console color-bold support,
+ ncv#32,
+ bold=\E[35m,
+ sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
+ use=xnuppc+basic,
-# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
-# Here's a termcap entry I've been using for xterm_color, which comes
-# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
-# color stuff, I also have a status line defined as the window manager
-# title bar. [I have translated it to terminfo -- ESR]
-xterm-pcolor|xterm with color used for highlights and status line,
- wsl#40,
- bold=\E[1;43m, rev=\E[7;34m,
- sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
- smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
+xnuppc+f|Darwin PowerPC Console fancy color support,
+ ncv#35,
+ sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;
+ m,
+ smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
-# This describes the capabilities of color_xterm, an xterm variant from
-# before ECMA-64 color support was folded into the main-line xterm release.
-# This entry is straight from color_xterm's maintainer.
-# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
-# The README's with the distribution also say that it supports SGR 21, 24, 25
-# and 27, but they are not present in the terminfo or termcap.
-color_xterm|cx|cx100|color_xterm color terminal emulator for X,
- OTbs, am, km, mir, msgr, xenl, XT,
- cols#80, it#8, lines#65, ncv@,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
- is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
- kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
- kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
- rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
- rmso=\E[27m, rmul=\E[24m,
- rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
- sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
- sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
- smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
- smul=\E[4m, use=ecma+color, use=vt220+keypad,
+xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
+ ncv#35,
+ bold=\E[33m,
+ sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
+ smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
-# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
-# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
-# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
-# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
-# that each of those implements the home, end, delete keys differently.
-#
-# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
-# colors; note that this is not compatible with the 5.2 version.
-# csw (2002-05-15): make xterm-color primary instead of nxterm, to
-# match XFree86's xterm.terminfo usage and prevent circular links
-xterm-color|nxterm|generic color xterm,
- ncv@,
- op=\E[m, use=xterm-r6, use=klone+color,
+# Building blocks for specific screen sizes
+xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
+ cols#80, lines#25,
-# This entry describes an xterm with Sun-style function keys enabled
-# via the X resource setting "xterm*sunFunctionKeys:true"
-# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
-# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
-# because we want it to be seen as <kcpy>.
-# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
-# with their Sun keyboard labels instead.
-# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
-xterm-sun|xterm with sunFunctionKeys true,
- kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
- kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
- kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
- kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
- kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
- kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
- kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
- kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
- kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
- kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
- kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
- kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
- use=xterm-basic,
-xterms-sun|small (80x24) xterm with sunFunctionKeys true,
- cols#80, lines#24, use=xterm-sun,
+xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
+ cols#80, lines#30,
-#### GNOME (VTE)
-# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
-gnome-rh62|Gnome terminal,
- bce,
- kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
- use=xterm-color,
+xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
+ cols#90, lines#30,
-# GNOME Terminal 1.4.0.4 (Redhat 7.2)
-#
-# This implements a subset of vt102 with a random selection of features from
-# other terminals such as color and function-keys.
-#
-# shift-f1 to shift-f10 are f11 to f20
-#
-# NumLock changes the application keypad to approximate vt100 keypad, except
-# that there is no escape sequence matching comma (,).
-#
-# Other defects observed:
-# vt100 LNM mode is not implemented.
-# vt100 80/132 column mode is not implemented.
-# vt100 DECALN is not implemented.
-# vt100 DECSCNM mode is not implemented, so flash does not work.
-# vt100 TBC (tab reset) is not implemented.
-# xterm alternate screen controls do not restore cursor position properly
-# it hangs in tack after running function-keys test.
-gnome-rh72|GNOME Terminal,
- bce, km@,
- civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP,
- kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
- sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color,
+xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
+ cols#100, lines#37,
-# GNOME Terminal 2.0.1 (Redhat 8.0)
-#
-# Documentation now claims it implements vt220 (which is demonstrably false).
-# However, it does implement ECH, which is a vt220 feature. And there are
-# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
-# more of its bugs using vttest.
-#
-# However, note that bce and msgr are broken in this release. Tabs (tbc and
-# hts) are broken as well. Sometimes flash (as in xterm-new) works.
-#
-# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
-# operations. Shift-tab generates a distinct sequence so it can be argued
-# that it implements kcbt.
-gnome-rh80|GNOME Terminal,
- bce@, msgr@,
- ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177,
- kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
+xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
+ cols#112, lines#37,
-# GNOME Terminal 2.2.1 (Redhat 9.0)
-#
-# bce and msgr are repaired.
-gnome-rh90|GNOME Terminal,
- bce, msgr, XT,
- hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
- kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
- vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
- use=gnome-rh80,
+xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
+ cols#128, lines#40,
-# GNOME Terminal 2.14.2 (Fedora Core 5)
-# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
-gnome-fc5|GNOME Terminal,
- rs1=\Ec,
- rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
- use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
+xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
+ cols#128, lines#48,
-# GNOME Terminal 2.18.1 (2007 snapshot)
-#
-# For any "recent" version of gnome-terminal, it is futile to attempt to
-# support modifiers on cursor- and keypad keys because the program usually
-# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
-# of the keys (which more/less correspond to the termcap values), and will
-# interpret those according to the $TERM value, but others not in the
-# terminfo according to some constantly changing set of hacker guidelines -TD
-vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
- use=xterm+pcc2, use=gnome-fc5,
-gnome-2007|GNOME Terminal snapshot 2.18.1,
- use=vte-2007,
+xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
+ cols#144, lines#48,
-# GNOME Terminal 2.22.3 (2008 snapshot)
-#
-# In vttest, it claims to be a vt220 with national replacement character-sets,
-# but aside from the identifier string, implements only a small fraction of
-# vt220's behavior, which will make it less usable on a VMS system (unclear
-# what the intent of the developer is, since the NRC feature exposed in vttest
-# by this change does not work).
-vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
- use=vte+pcfkeys, use=vte-2007,
-gnome-2008|GNOME Terminal snapshot 2.22.3,
- use=vte-2008,
+xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
+ cols#160, lines#64,
-# GNOME terminal may automatically use the contents of the "xterm" terminfo to
-# supply key information which is not built into the program. With 2.22.3,
-# this list is built into the program (which addresses the inadvertant use of
-# random terminfo data, though using a set of values which does not correspond
-# to any that xterm produces - still not solving the problem that GNOME
-# terminal hardcodes the $TERM variable as "xterm").
-#
-# terminfo modifier code keys
-# kf13-kf24 shift 2 F1 to F12
-# kf25-kf36 control 5 F1 to F12
-# kf37-kf48 shift/control 6 F1 to F12
-# kf49-kf60 alt 3 F1 to F12
-# kf61-kf63 shift-alt 4 F1 to F3
-#
-# The parameters with \EO (SS3) are technically an error, since SS3 should have
-# no parameters. This appears to be rote copying based on xterm+pcc0.
-vte+pcfkeys|VTE's variation on xterm+pcfkeys,
- kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
- kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
- kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
- kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
- kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
- kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
- use=xterm+pcfkeys,
-gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
- use=vte+pcfkeys,
+xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
+ cols#200, lines#64,
-vte|VTE aka GNOME Terminal,
- use=vte-2008,
-gnome|GNOME Terminal,
- use=vte,
+xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
+ cols#200, lines#75,
-# palette is hardcoded...
-vte-256color|VTE with xterm 256-colors,
- initc@, use=xterm+256color, use=vte,
-gnome-256color|GNOME Terminal with xterm 256-colors,
- use=vte-256color,
+xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
+ cols#0x100, lines#96,
-# XFCE Terminal 0.2.5.4beta2
-#
-# This is based on some of the same source code, e.g., the VTE library, as
-# gnome-terminal, but has fewer features, fails more screens in vttest.
-# Since most of the terminfo-related behavior is due to the VTE library,
-# the terminfo is the same as gnome-terminal.
-xfce|Xfce Terminal,
- use=vte,
+# These are different combinations of the building blocks
-#### Other GNOME
-# Multi-Gnome-Terminal 1.6.2
-#
-# This does not use VTE, and does have different behavior (compare xfce and
-# gnome).
-mgt|Multi GNOME Terminal,
- indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
+xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
+ use=xnuppc+basic,
-#### KDE
-# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
-# or not is debatable).
-kvt|KDE terminal,
- bce, km@,
- kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
+xnuppc|darwin|Darwin PowerPC Console (color),
+ use=xnuppc+c, use=xnuppc+basic,
-# Konsole 1.0.1
-# (formerly known as kvt)
-#
-# This program hardcodes $TERM to 'xterm', which is not accurate. However, to
-# simplify this entry (and point out why konsole isn't xterm), we base this on
-# xterm-r6. The default keyboard appears to be 'linux'.
-#
-# Notes:
-# a) konsole implements several features from XFree86 xterm, though none of
-# that is documented - except of course in its source code - apparently
-# because its implementors are unaccustomed to reading documentation - as
-# evidenced by the sparse and poorly edited documentation distributed with
-# konsole. Some features such as the 1049 private mode are recognized but
-# incorrectly implemented as a duplicate of the 47 private mode.
-# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
-# sends PC-style escapes rather than vt100.
-# c) fails vttest menu 3 (Test of character sets) because it does not properly
-# parse some control sequences. Also fails vttest Primary Device Attributes
-# by sending a bogus code (in the source it says it's supposed to be a
-# vt220, which is doubly incorrect because it does not implement vt220
-# control sequences except for a few special cases). Treat it as a
-# mildly-broken vt102.
+xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
+ use=xnuppc+b,
+
+xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
+ use=xnuppc+b, use=xnuppc+c,
+
+xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
+ use=xnuppc+f,
+
+xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
+ use=xnuppc+f, use=xnuppc+c,
+
+xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
+ use=xnuppc+f2,
+
+xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
+ use=xnuppc+f2, use=xnuppc+c,
+
+# Combinations for specific screen sizes
+xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
+ use=xnuppc+80x25, use=xnuppc+basic,
+
+xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
+ use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
+
+xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
+ use=xnuppc+80x30, use=xnuppc+basic,
+
+xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
+ use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
+
+xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
+ use=xnuppc+90x30, use=xnuppc+basic,
+
+xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
+ use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
+
+xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
+ use=xnuppc+100x37, use=xnuppc+basic,
+
+xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
+ use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
+
+xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
+ use=xnuppc+112x37, use=xnuppc+basic,
+
+xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
+ use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
+
+xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
+ use=xnuppc+128x40, use=xnuppc+basic,
+
+xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
+ use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
+
+xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
+ use=xnuppc+128x48, use=xnuppc+basic,
+
+xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
+ use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
+
+xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
+ use=xnuppc+144x48, use=xnuppc+basic,
+
+xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
+ use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
+
+xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
+ use=xnuppc+160x64, use=xnuppc+basic,
+
+xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
+ use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
+
+xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
+ use=xnuppc+200x64, use=xnuppc+basic,
+
+xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
+ use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
+
+xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
+ use=xnuppc+200x75, use=xnuppc+basic,
+
+xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
+ use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
+
+xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
+ use=xnuppc+256x96, use=xnuppc+basic,
+
+xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
+ use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
+
+######## DOS/WINDOWS
+# CRT is shareware. It implements some xterm features, including mouse.
+crt|crt-vt220|CRT 2.3 emulating VT220,
+ bce, msgr,
+ ncv@,
+ hts=\EH, use=vt100+enq, use=vt220-base, use=ecma+color,
+
+#### PuTTY
+# PuTTY 0.74 (27 June 2020)
+# http://www.chiark.greenend.org.uk/~sgtatham/putty/
#
-# Update for konsole 1.3.2:
-# The 1049 private mode works (but see the other xterm screens in vttest).
-# Primary Device Attributes now returns the code for a vt100 with advanced
-# video option. Perhaps that's intended to be a "mildly-broken vt102".
+# PuTTY 0.73 (September 2019)
+# Testing with tack:
+# does not implement italics
+# does not implement cross-out text
+# its settings dialog allows some of the VT100 line-drawing tests to pass
+# (not the padding test, though)
+# Testing with vttest:
+# xterm mouse modes are incomplete: X10, highlight, any-event, and focus in/out modes are not implemented.
+# does not implement protected areas
+# does not implement SL/SR
#
-# Updated for konsole 1.6.4:
-# add konsole-solaris
+# PuTTY 0.71 (March 2019) provided a workable "rep" capability. It also
+# changed longstanding keypad assignments, so that these no longer apply:
+# kLFT=\E[D, kRIT=\E[C, kb2=\E[G,
#
-# Updated for konsole 1.6.6:
-# add control-key modifiers for function-keys, etc.
+# PuTTY recognized xterm's 1006 mouse mode in late 2015; subsequent release was
+# in 2017 (0.70) -TD
#
-# vttest menu 1 shows that both konsole and gnome terminal do wrapping
-# different from xterm (and vt100's). They have the same behavior in this
-# detail, but it is unclear which copies the other.
-konsole-base|KDE console window,
- bce, km@, npc, XT,
- ncv@,
- bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
- ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
- hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@,
- kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
- kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
- kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
- rmso=\E[27m, rmul=\E[24m,
- rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
- sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
- use=ecma+color, use=xterm-r6,
-konsole-linux|KDE console window with linux keyboard,
- kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
- kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
- kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- use=konsole-base,
-konsole-solaris|KDE console window with Solaris keyboard,
- kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
-# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
-# than testing the code.
-konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
- kend=\E[4~, khome=\E[1~, use=konsole-vt100,
-# The value for kbs reflects local customization rather than the settings used
-# for XFree86 xterm.
-konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
- kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
- use=konsole-vt100,
-# Konsole does not implement shifted cursor-keys.
-konsole+pcfkeys|konsole subset of xterm+pcfkeys,
- kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2,
- use=xterm+pcf0,
-# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
-# it is still useful for deriving the other entries.
-konsole-vt100|KDE console window with vt100 (sic) keyboard,
- kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
- kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[H, use=konsole-base,
-konsole-vt420pc|KDE console window with vt420 pc keyboard,
- kbs=^H, kdch1=\177, use=konsole-vt100,
-konsole-16color|klone of xterm-16color,
- ncv#32, use=ibm+16color, use=konsole,
-# make a default entry for konsole
-konsole|KDE console window,
- use=konsole-xf4x,
-
-# palette is hardcoded...
-konsole-256color|KDE console window with xterm 256-colors,
- initc@, use=xterm+256color, use=konsole,
-
-#### MLTERM
-# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
+# Comparing with 0.51, vttest is much better (only a few problems with the
+# cursor position reports and wrapping).
#
-# It is nominally a vt102 emulator, with features borrowed from rxvt and
-# xterm.
+# PuTTY 0.51 (14 December 2000)
#
-# The function keys are numbered based on shift/control/alt modifiers, except
-# that the control-modifier itself is used to spawn a new copy of mlterm (the
-# "-P" option). So control/F1 to control/F12 may not be usable, depending on
-# how it is configured.
+# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as
+# well as SCO and Atari, color palettes from Linux console). Reading the code,
+# it is intended to be VT102 plus selected features. By default, it sets $TERM
+# to xterm, which is incorrect, since several features are misimplemented:
#
-# kf1 to kf12 \E[11~ to \E[24~
-# shift kf1 to kf12 \E[11;2~ to \E[24;2~
-# alt kf1 to kf12 \E[11;3~ to \E[24;3~
-# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
-# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
-# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
-# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
-# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
+# Alt+key always sends ESC+key, so 'km' capability is removed.
#
-mlterm|multi lingual terminal emulator,
- am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
- colors#8, cols#80, it#8, lines#24, pairs#64,
- acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
- home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
- is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
- kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
- kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~,
- khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M,
- knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i,
- nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
- rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
- rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
- rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
- sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
- sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
- smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
- vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2,
-
-# The insert/delete/home/end keys do not respond to modifiers because mlterm
-# looks in its termcap to decide which string to send. If it used terminfo
-# (when available), it could use the extended names introduced for xterm.
-mlterm+pcfkeys|fragment for PC-style fkeys,
- kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
- kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
- kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
- kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
- kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
- kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
- kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
- kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
- kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
-
-mlterm-256color|mlterm 3.0 with xterm 256-colors,
- use=xterm+256color, use=rxvt,
-
-#### RXVT
-# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
-# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
-# Notes:
-# rxvt 2.21b uses
-# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
-# but some applications don't work with that.
-# It also has an AIX extension
-# box2=lqkxjmwuvtn,
-# and
-# ech=\E[%p1%dX,
-# but the latter does not work correctly.
+# Control responses, wrapping and tabs are buggy, failing a couple of
+# screens in vttest.
#
-# The distributed terminfo says it implements hpa and vpa, but they are not
-# implemented correctly, using relative rather than absolute positioning.
+# xterm mouse support is not implemented (unreleased version may).
#
-# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
-# Since rxvt is not really compatible with xterm, it should be configured as
-# "rxvt" or "rxvt-color".
+# Several features such as backspace/delete are optional; this entry documents
+# the default behavior. None of the combinations of keyboard settings match
+# those used for xterm -TD
#
-# removed dch/dch1 because they are inconsistent with bce/ech -TD
-# remove km as per tack test -TD
-rxvt-basic|rxvt terminal base (X Window System),
- OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
- cols#80, it#8, lines#24,
+# PuTTY recognizes xterm's 1049 mode for switching to/from alternate screen,
+# but implements it incorrectly as mentioned here:
+# http://stackoverflow.com/questions/24613237/terminal-retains-bg-color-after-closing-vim-using-color-scheme-and-putty-256co/37869114#37869114
+putty|PuTTY terminal emulator,
+ am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
+ colors#8, it#8, ncv#22, pairs#64, U8#1,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
- hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
- ind=^J, is1=\E[?47l\E=\E[?1l,
- is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
- kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
- rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
+ cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
+ dch=\E[%p1%dP, dch1=\E[P,
+ dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G
+ \342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e
+ %p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G
+ \342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@
+ %e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E
+ %%G\340\202\242\E%%@%e%p1%c%;,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l,
+ home=\E[H, hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/
+ %02x%p4%{255}%*%{1000}%/%02x,
+ is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
+ kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, khome=\E[1~,
+ kich1=\E[2~, kind=\E[B, knp=\E[6~, kpp=\E[5~, kri=\E[A,
+ kspd=^Z, nel=\r\n, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmpch=\E[10m, rmso=\E[27m,
rmul=\E[24m,
- rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
- rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
- s0ds=\E(B, s1ds=\E(0, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
- sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
- smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
- use=rxvt+pcfkeys, use=vt220+keypad,
-# Key Codes from rxvt reference:
+ rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l,
+ s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
+ smir=\E[4h, smkx=\E[?1h\E=, smpch=\E[11m, smso=\E[7m,
+ smul=\E[4m, vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+tabs,
+ use=ansi+rep, use=ecma+index, use=xterm+sm+1006,
+ use=putty+fnkeys, use=vt102+enq, use=xterm+sl,
+ use=vt100+fnkeys, use=putty+keypad, use=vt220+cvis,
+putty+keypad|PuTTY numeric keypad,
+ kp1=\EOq, kp2=\EOr, kp3=\EOs, kp4=\EOt, kp5=\EOu, kp6=\EOv,
+ kp7=\EOw, kp8=\EOx, kp9=\EOy, kpADD=\EOl, kpDIV=\EOQ,
+ kpDOT=\EOn, kpMUL=\EOR, kpNUM=\EOP, kpSUB=\EOS, kpZRO=\EOp,
+
+vt100-putty|Reset PuTTY to pure vt100,
+ rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
+ use=vt100,
+putty-256color|PuTTY 0.58 with xterm 256-colors,
+ use=xterm+256setaf, use=putty,
+putty-noapp|putty with cursor keys in normal mode,
+ kLFT=\EOD, kRIT=\EOC, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kind=\EOB, kri=\EOA, rmkx=\E>, smkx=\E=,
+ use=putty,
+
+# One of the keyboard selections is "VT100+".
+# pterm (the X11 port) uses shifted F1-F10 as F11-F20
+putty-vt100|VT100+ keyboard layout,
+ use=putty+fnkeys+vt100, use=putty,
+
+putty-sco|putty with SCO function keys,
+ use=putty+fnkeys+sco, use=putty,
+
+# PuTTY has more than one section in its Keyboard configuration:
+# a) backspace/delete, which we ignore since that choice largely depends on
+# whether one matches Unix and BSD or Linux.
+# b) home/end keys, also ignored because the "rxvt" setting sends keys which
+# are unrelated to rxvt's actual settings.
+# c) function keys and keypad - this is the interesting part. None of the
+# selections match any of their respective namesakes, but they are shown
+# here to help users who expect that the selections do what is implied.
+#
+# This is the default setting for PuTTY
+putty+fnkeys|fn-keys for PuTTY,
+ use=putty+fnkeys+esc,
+
+putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
+ kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
+ kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+
+putty+fnkeys+linux|Linux fn-keys for PuTTY,
+ kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
+ use=putty+fnkeys+esc,
+
+putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ use=putty+fnkeys+esc,
+
+putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
+ use=putty+fnkeys+esc,
+
+# Shifted F1 is F11. F13-F20 inherit from the defaults, and the last distinct
+# key is F20.
+putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
+ kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
+ kf9=\EOX, use=putty+fnkeys+esc,
+
+# Unlike xterm-sco, this leaves kmous ambiguous with kf1.
#
-# Note: Shift + F1-F10 generates F11-F20
+# Use modifiers to obtain function keys past 12:
+# F1-F12 - normal
+# F13-F24 - shift
+# F25-F36 - control/alt
+# F37-F48 - control/shift
#
-# For the keypad, use Shift to temporarily override Application-Keypad
-# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
-# is off, escape sequences toggle Application-Keypad setting.
-# Also note that values of Home, End, Delete may have been compiled
-# differently on your system.
+putty+fnkeys+sco|SCO fn-keys for PuTTY,
+ kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
+ kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
+ kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
+ kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
+ kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
+ kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
+ kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
+ kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
+ kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
+ kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
+ kich1=\E[L, knp=\E[G, kpp=\E[I,
+
+#### mintty
+# https://github.com/mintty/mintty
+#
+# Originally a fork (and reduction) of PuTTY, this has grown from 15ksloc in
+# 2013 to 41ksloc in 2020. That is still smaller than PuTTY (160ksloc), but
+# larger than rxvt (31ksloc) and slightly smaller than rxvt-unicode (42ksloc).
+#
+# Version 3.0 responds to DA as a VT400, however it does not implement the
+# application keypad. The assignment of cursor-keys versus modifiers differs
+# from xterm (alt-left and alt-right send modifier 7, i.e., alt+control).
+#
+# Thomas Wolff suggested these extensions:
+# blink2 turn on rapid blinking
+# blink0 turn off blinking
+# norm turn off bold and half-bright mode
+# opaq turn off blank mode
+# smul2 begin double underline mode
+# smol begin overline mode
+# rmol exit overline mode
+# Font0 use default font
+# Font1 use alternative font 1
+# ...
+# Font10 use alternative font 10
+# setal set (under)line color
+# ol set default (under)line color
+# overs overstrike (print characters over each other)
+#
+# but see vte-2018 (use Smol/Rmol rather than smol/rmol).
+mintty|Cygwin Terminal,
+ setal=\E[5%p1%dm, use=xterm+256color,
+ use=mintty+common,
+mintty-direct|Cygwin Terminal direct-color,
+ setal=\E[%?%p1%{8}%<%t5%p1%d%e58\:2\:\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
+ use=xterm+direct, use=mintty+common,
+mintty+common|shared capabilities for mintty,
+ km@, npc,
+ kcbt=\E[Z, kent=\EOM, rmm@, rmpch=\E[10m,
+ rs1=\Ec\E]104\007, rshm=\E[22m, rsubm=\E[75m,
+ rsupm=\E[75m, smm@, smpch=\E[11m, sshm=\E[1\:2m,
+ ssubm=\E[74m, ssupm=\E[73m, Rmol=\E[55m, Smol=\E[53m,
+ Smulx=\E[4\:%p1%dm, blink2=\E[6m, norm=\E[22m,
+ opaq=\E[28m, smul2=\E[21m, use=ansi+rep,
+ use=ecma+strikeout, use=ecma+index, use=vt420+lrmm,
+ use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
+ use=xterm-basic,
+# 2019-06-09: These capabilities are commented-out for compatibility with
+# existing releases 5.9-6.1, and may be considered for inclusion after the
+# release of ncurses 6.2:
+# Font0=\E[10m,
+# Font1=\E[11m,
+# Font2=\E[12m,
+# Font3=\E[13m,
+# Font4=\E[14m,
+# Font5=\E[15m,
+# Font6=\E[16m,
+# Font7=\E[17m,
+# Font8=\E[18m,
+# Font9=\E[19m,
+# Font10=\E[20m,
+# blink0=\E[25m,
+# ol=\E[59m,
+# overs=\E[8\:7m,
+
+#### TeraTerm
+
+# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
+# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
+# (communication program) which supports:
#
-# Normal Shift Control Ctrl+Shift
-# Tab ^I ESC [ Z ^I ESC [ Z
-# BackSpace ^H ^? ^? ^?
-# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
-# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
-# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
-# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
-# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
-# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
-# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
-# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
-# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
-# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
-# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
-# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
-# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
-# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
-# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
-# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
-# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
-# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
-# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
-# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
-# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
-# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
-# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
-# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
-# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
-# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
-# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
-# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
-# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
+# - Serial port connections.
+# - TCP/IP (telnet) connections.
+# - VT100 emulation, and selected VT200/300 emulation.
+# - TEK4010 emulation.
+# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
+# Quick-VAN).
+# - Scripts using the "Tera Term Language".
+# - Japanese and Russian character sets.
#
-# Application
-# Up ESC [ A ESC [ a ESC O a ESC O A
-# Down ESC [ B ESC [ b ESC O b ESC O B
-# Right ESC [ C ESC [ c ESC O c ESC O C
-# Left ESC [ D ESC [ d ESC O d ESC O D
-# KP_Enter ^M ESC O M
-# KP_F1 ESC O P ESC O P
-# KP_F2 ESC O Q ESC O Q
-# KP_F3 ESC O R ESC O R
-# KP_F4 ESC O S ESC O S
-# XK_KP_Multiply * ESC O j
-# XK_KP_Add + ESC O k
-# XK_KP_Separator , ESC O l
-# XK_KP_Subtract - ESC O m
-# XK_KP_Decimal . ESC O n
-# XK_KP_Divide / ESC O o
-# XK_KP_0 0 ESC O p
-# XK_KP_1 1 ESC O q
-# XK_KP_2 2 ESC O r
-# XK_KP_3 3 ESC O s
-# XK_KP_4 4 ESC O t
-# XK_KP_5 5 ESC O u
-# XK_KP_6 6 ESC O v
-# XK_KP_7 7 ESC O w
-# XK_KP_8 8 ESC O x
-# XK_KP_9 9 ESC O y
+# The program does not come with terminfo or termcap entries. However, the
+# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
+# vt52 or doublesize character support; blinking is done with color). Besides
+# the HPA, VPA extensions it also implements CPL and CNL.
#
-# The source-code for rxvt actually defines mappings for F21-F35, using
-# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
-# are rare, so this entry uses the shift- and control-modifiers as in
-# xterm+pcfkeys to define keys past F12.
+# All of the function keys can be remapped. This description shows the default
+# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
+# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
+# is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
+# kfnd Insert
+# kslt Delete
+# kich1 Home
+# kdch1 PageUp
+# kpp End
+# knp PageDown
#
-# kIC is normally not used, since rxvt performs a paste for that (shifted
-# insert), unless private mode 35 is set.
+# ANSI colors are implemented, but cannot be combined with video attributes
+# except for reverse.
#
-# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
-# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
-rxvt+pcfkeys|fragment for PC-style fkeys,
- kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
- kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
- kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
- kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
- kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
- kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
- kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
- kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
- kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
- kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
- kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
- kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
- kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
- kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
- kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
- kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
-
-rxvt|rxvt terminal emulator (X Window System),
- ncv@,
- hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
- vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
-rxvt-color|rxvt terminal emulator (X Window System),
- use=rxvt,
-rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
- use=xterm+256color, use=rxvt,
-rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
- use=xterm+88color, use=rxvt,
-rxvt-xpm|rxvt terminal emulator (X Window System),
- use=rxvt,
-rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
- acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- use=rxvt,
-rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
- acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
- use=rxvt-cygwin,
+# No fonts are supplied with the program, so the acsc string is chosen to
+# correspond with the default Microsoft terminal font.
+#
+# Tera Term recognizes some xterm sequences, including those for setting and
+# retrieving the window title, and for setting the window size (i.e., using
+# "resize -s"), though it does not pass SIGWINCH to the application if the
+# user resizes the window with the mouse.
+teraterm2.3|Tera Term Pro,
+ km,
+ ncv#43, vt@,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
+ \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
+ \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
+ el=\E[K, el1=\E[1K, flash=\E[?5h$<200/>\E[?5l,
+ hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~,
+ kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
+ kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, op=\E[100m,
+ rev=\E[7m, ri=\EM, rmso=\E[27m, rmul=\E[24m,
+ sgr0=\E[0m\017, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
+ use=vt100+enq, use=klone+color, use=vt100,
+ use=vt220+cvis,
-# This variant is supposed to work with rxvt 2.7.7 when compiled with
-# NO_BRIGHTCOLOR defined. rxvt needs more work...
-rxvt-16color|xterm with 16 colors like aixterm,
- ncv#32, use=ibm+16color, use=rxvt,
+# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary
+# to choose a Windows OEM font).
+#
+# Testing with tack:
+# - it does not have xenl (suppress that)
+# - underline seems to work with color (modify ncv).
+# Testing with vttest:
+# - wrapping differs from vt100 (menu 1).
+# - it recognizes xterm's X10 and normal mouse tracking, but none of the
+# other flavors.
+# - it recognizes the dtterm window controls for reporting size in
+# characters and pixels.
+# - it passes SIGWINCH.
+teraterm4.59|Tera Term Pro,
+ bce, xenl@,
+ ncv#41,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ kmous=\E[M, use=teraterm2.3,
-#### MRXVT
-# mrxvt 0.5.4
+# Version 4.97
#
-# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
-# makes its function-keys different from other flavors of rxvt -TD
-mrxvt|multitabbed rxvt,
- XT,
- kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
- kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
- kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
- kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
- kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
- use=rxvt,
+# Testing with tack:
+# - no bell (flash works)
+# - bold is yellow, blink is red.
+# - default keyboard sends ^? for Delete, can be configured for kdch1
+# - no meta mode
+# Testing with vttest:
+# + autowrap has problems...
+# + color-tests for bce feature match xterm's behavior
+# + handles most of xterm's mouse-controls other than highlight-tracking.
+# xterm's SGR 1006 works.
+# + partial support for DEC locator-events
+# + implements ECMA-48 SD/SU, but not REP, SL/SR.
+# + has a "Tek" window, but does not work with vttest's examples
+# + supports the dtterm window modify/report controls
+# + responds to DECRQM and DECRQSS controls, but not consistent with DSR
+# e.g., for VT220
+# + VT220 screen-display tests are ok
+# + no VT52 support
+# Other tests:
+# + recognizes xterm's original direct-colors sequences, but result is
+# poor.
+# + no UTF-8 apparent when UTF-8 is set, with font Lucida Control
+teraterm4.97|Tera Term Pro,
+ XT, use=ecma+color, use=xterm+sm+1006, use=teraterm4.59,
+teraterm-256color|TeraTerm with xterm 256-colors,
+ use=xterm+256setaf, use=teraterm,
-mrxvt-256color|multitabbed rxvt with 256 colors,
- use=xterm+256color, use=mrxvt,
+teraterm|Tera Term,
+ use=teraterm4.97,
-#### ETERM
-# From: Michael Jennings <mej@valinux.com>
-#
-# Eterm 0.9.3
+#### Command prompt
+
+# Tested with WinNT 4.0, the telnet application assumes the screensize is
+# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
#
-# removed kf0 which conflicts with kf10 -TD
-# remove cvvis which conflicts with cnorm -TD
-# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
-# but does otherwise follow the rxvt+pcfkeys model -TD
-# remove nonworking flash -TD
-# remove km as per tack test -TD
-Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
- am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
- btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+# Other notes:
+# a) Fails tack's cup (cursor-addressing) test, though cup works well enough
+# for casual (occasional) use. Also fails several of the vttest screens,
+# but that is not unusual for vt100 "emulators".
+# b) Does not implement vt100 keypad
+# c) Recognizes a subset of vt52 controls.
+ms-vt100|MS telnet imitating dec vt100,
+ lines#25,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
+ \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
+ \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
+ kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
+
+# Tested with Windows 2000, the telnet application runs in a console window,
+# also using 'Terminal' font.
+#
+# Other notes:
+# a) This version has no function keys or numeric keypad. Unlike the older
+# version, the numeric keypad is entirely ignored.
+# b) The program sets $TERM to "ansi", which of course is inaccurate.
+ms-vt100-color|vtnt|windows 2000 ansi (sic),
+ bce,
+ dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color,
+ use=ms-vt100,
+
+# Based on comments from Federico Bianchi:
+#
+# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different
+# scheme for PF keys.
+#
+# and PuTTY wishlist:
+#
+# The modifiers are represented as the codes listed above, prefixed to
+# the normal sequences. If the modifier is pressed alone, its sequence
+# is transmitted twice in succession. If multiple modifiers apply,
+# they're transmitted in the order shift, control, alt.
+#
+# Shift \E^S
+# Alt \E^A,
+# Ctrl \E^C,
+ms-vt100+|vt100+|windows XP vt100+ (sic),
+ kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@,
+ kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3,
+ kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6,
+ kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9,
+ kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@,
+ kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3,
+ kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6,
+ kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9,
+ kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@,
+ kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4,
+ kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6,
+ kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9,
+ kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5,
+ kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+,
+ knp=\E/, kpp=\E?, use=ms-vt100-color,
+
+ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
+ use=ms-vt100+,
+
+# Windows Terminal (Preview)
+# Windows 10 1903
+# Version 0.2.1831.0
+# https://github.com/microsoft/terminal
+#
+# The task manager shows this as "OpenConsole.exe", which differs
+# from the "Windows Command Processor" used for the command-prompt.
+#
+# The settings dialog does not work (unless the end user expects to open
+# profiles.json in Visual Studio). There is no documentation, of course.
+#
+# Testing via an ssh connection, using openssh:
+# - the program sets TERM to cygwin if the tab is set to PowerShell,
+# and to xterm-256color if "Legacy". However, in the latter, more tests
+# fail in vttest, which does not pay attention to TERM.
+# vttest:
+# - menu 1 (tests for cursor movement) misbehaves like command-prompt
+# - primary DA says this is a vanilla VT100
+# - does not flush response to primary DA, leaving a ^M on the end when
+# the PowerShell tab is used. Both the "Legacy" tab and the command-prompt
+# work properly in this test.
+# - in the generic VT100 tests, there are problems with character sets
+# (diamond shows as a double-width character, DEL as two replacement-chars).
+# - outside of the generic VT100 tests, the program does poorly because most
+# of the features are missing.
+# - ECH does not work properly
+# - a few generic xterm features are supported (set window title), but
+# others are missing (such as the mouse).
+# - the cursor visible/invisible works in the PowerShell tab, not in "Legacy"
+# tack:
+# - blink, dim, bold, invis, protect do not work
+# - bce works (but per vttest, with ED, EL, not ECH)
+# - does not support keypad application mode
+# - implements most of the xterm modified keys; sometimes modifiers are ignored
+# or simply incorrect
+# - sends escape+key rather than implementing meta mode
+# other:
+# - color palette can be altered, but OSC 104 for resetting does not work
+# - crashed with a script used for testing NRCS.
+# - does not recognize either xterm+direct or xterm+indirect escapes.
+ms-terminal|Windows10 terminal,
+ npc,
+ rmkx=\E[?1l, rmm@, smkx=\E[?1h, smm@, use=xterm+256setaf,
+ use=xterm+pcfkeys, use=ansi+rep, use=ecma+index,
+ use=xterm-basic,
+
+#### Visual Studio
+# Visual Studio Code 1.45.0 uses xterm.js 12.8.1 (see https://xtermjs.org/).
+#
+# vttest:
+# - fixes menu 1 problem with wrapping
+# - supports DECALN
+# - fixes menu 8 problem with delete-character
+# - REP, SL/SL work
+# - keypad application mode still does not work; PF1-PF4 are not assigned.
+# - DECRQM/DECRPM do not work
+# - xterm mouse features:
+# - SGR coordinates work; the other modes do not (see vscode #96058)
+# - focus-events are not sent
+# - mouse highlight tracking does not send button event
+# tack/other:
+# - little or no change since previous review
+#
+# Visual Studio Code 1.35.1 uses xterm.js (see https://xtermjs.org/).
+# https://code.visualstudio.com/docs/editor/integrated-terminal
+#
+# This sets TERM to xterm-256color, which is a little more successful than
+# Windows Terminal.
+#
+# vttest:
+# - menu 1 (cursor movement) has problems with wrapping
+# - claims to be a VT100 with AVO, but copies xterm #276's secondary response
+# - menu 8 (insert/delete char/line) has problem with delete-character
+# - like Windows Terminal, fails the ECH test: neither supports DECALN
+# However, the bce test with ECH works.
+# - does not support keypad application mode
+# - supports most xterm mode controls (except DEC Locator Events)
+# - REP, SL/SL do not work, but SD/SU work.
+# - the alternate-screen tests fail because it does not support DECALN
+# - window modify/report is not supported
+# - supports some VT320 presentation reports
+# tack:
+# - does not support blinking text
+# - implements most of the xterm modified keys, with some exceptions:
+# - pageup/pagedown do not send escapes
+# - alt cursor left/right send escape-b and escape-f
+# - sends UTF-8 like xterm for meta mode
+# other:
+# - mouse mode is not reset by reset-sequence
+# - supports italics and dim, but not cross-out or double-underline
+# - color-palette cannot be changed
+vscode|xterm.js|Visual Studio Code terminal using xterm.js,
+ npc,
+ kcbt=\E[Z, rmkx=\E[?1l, smkx=\E[?1h, use=xterm+256setaf,
+ use=ecma+index, use=xterm+sm+1006, use=xterm+pcfkeys,
+ use=xterm-basic,
+vscode-direct|Visual Studio Code with direct-colors,
+ use=xterm+indirect, use=vscode,
+
+######## X TERMINAL EMULATORS
+#### XTERM
+#
+# You can add the following line to your .Xdefaults to change the terminal type
+# set by the xterms you start up to my-xterm:
+#
+# *termName: my-xterm
+#
+# System administrators can change the default entry for xterm instances
+# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
+# case, xterm will detect and reject an invalid terminal type, falling back
+# to the default of xterm.
+#
+
+# X10/6.6 11/7/86, minus alternate screen, plus (csr)
+# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
+# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
+# as these seem not to work -- esr)
+x10term|vs100-x10|xterm terminal emulator (X10 window system),
+ OTbs, am, km, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#65,
+ bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
+ il1=\E[L, ind=\n, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
+ smso=\E[7m, smul=\E[4m,
+# Compatible with the R5 xterm
+# (from the XFree86 3.2 distribution, <blink=@> removed)
+# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
+# corrected typos in rs2 string - TD
+# added u6-u9 -TD
+xterm-r5|xterm R5 version,
+ OTbs, am, km, msgr, xenl,
+ cols#80, it#8, lines#24,
+ bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kdl1=\E[31~,
+ kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
+ kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kil1=\E[30~,
+ kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
+ sc=\E7,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
+ %;m,
+ sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=xterm+kbs,
+# Compatible with the R6 xterm
+# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
+# added khome/kend, hts based on the R6 xterm code - TD
+# (khome/kend do not actually work in X11R5 or X11R6, but many people use this
+# for compatibility with other emulators).
+xterm-r6|xterm X11R6 version,
+ OTbs, am, km, mir, msgr, xenl,
+ cols#80, it#8, lines#24,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
+ il1=\E[L, ind=\n,
+ is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
+ sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ use=xterm+kbs, use=vt100+enq,
+xterm-old|antique xterm version,
+ use=xterm-r6,
+# The monochrome version began as a copy of "xtermm" (from Solaris), and was
+# initially part of the xterm sources (in XFree86). But "xterm" continued to
+# grow, while "xterm-mono" had none of the newer features. Additionally,
+# inheriting from "xtermm" runs into several problems, including different
+# function keys as well as the fact that the mouse support is not compatible.
+# This entry restores the original intent, intentionally not an alias to
+# simplify maintenance -TD
+xterm-mono|monochrome xterm,
+ use=xterm-r6,
+# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
+# The name has been changed and some aliases have been removed.
+xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
+ OTbs, am, bce, km, mir, msgr, xenl, XT,
+ cols#80, it#8, lines#24, ncv@,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
- home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
- is1=\E[?47l\E>\E[?1l,
- is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
- kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
- kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
- mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
- rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
- rmso=\E[27m, rmul=\E[24m,
- rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
- rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=\n,
+ is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
+ kbeg=\EOE, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=^?, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~,
+ kpp=\E[5~, kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=^O, rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>,
sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
- smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
- use=ecma+color,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, vpa=\E[%i%p1%dd, use=xterm+kbs, use=vt100+enq,
+ use=ecma+color, use=vt220+cvis, use=vt220+keypad,
-Eterm-256color|Eterm with xterm 256-colors,
- use=xterm+256color, use=Eterm,
+# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
+# codes for F1-F4 except while in VT220 mode.
+xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
-Eterm-88color|Eterm with 88 colors,
- use=xterm+88color, use=Eterm,
+# This version was released in XFree86 3.3.3 (November 1998).
+# Besides providing printer support, it exploits a new feature that allows
+# xterm to use terminfo-based descriptions with the titeInhibit resource.
+# -- the distribution contained incorrect khome/kend values -TD
+xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
+ blink=\E[5m, ich1@, invis=\E[8m,
+ is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
+ rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
+ rs2=\E[!p\E[?3;4l\E[4l\E>,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ smcup=\E[?1048h\E[?1047h, use=ansi+pp,
+ use=xterm-xf86-v33,
-#### ATERM
-# Based on rxvt 2.4.8, it has a few differences in key bindings
-aterm|AfterStep terminal,
- XT,
- kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
+# This version was released in XFree86 4.0.
+xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
+ npc,
+ kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
+ kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
+ ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
+ kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
+ kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
+ kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
+ kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
+ kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
+ kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
+ kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
+ kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
+ kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
+ kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
+ kf48=\E[24;6~, khome=\EOH,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
+ %p9%t\016%e\017%;,
+ use=xterm+alt1049, use=xterm-xf86-v333,
-#### XITERM
-# xiterm 0.5-5.2
-# This is not based on xterm's source...
-# vttest shows several problems with keyboard, cursor-movements.
-# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
-xiterm|internationalized terminal emulator for X,
- km@,
- kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
+# This version was released in XFree86 4.3.
+xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
+ kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
+ kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C,
+ kbeg@,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p7%t;8%;m%?%p9%t\016%e\017%;,
+ use=xterm-xf86-v40,
+# Controlling the cursor-visibility is not a "new" feature, but was generally
+# neglected in terminal emulators until the mid-1990s. These would work for
+# the hardware terminals, or for more recent emulators, e.g., xterm.
+vt220+cvis|DECTCEM VT220 cursor-visibility,
+ civis=\E[?25l, cnorm=\E[?25h,
+vt220+cvis8|8-bit variant,
+ civis=\233?25l, cnorm=\233?25h,
+# The cvvis capability was unused in the SVr4 terminal descriptions for the
+# AT&T terminals, and there are no available documents as of 2021 which can
+# provide that it would have worked. The first block is used for those 1980s
+# terminals; the second is used for terminals whose behavior can be verified.
+att610+cvis0|ATT 610 cursor-visibility,
+ civis=\E[?25l, cnorm=\E[?25h\E[?12l,
+att610+cvis|xterm cursor-visibility in XFree86 4.4,
+ civis=\E[?25l, cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h,
-#### HPTERM
-# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
-# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
-# chars look like --esr)
-hpterm|X-hpterm|hp X11 terminal emulator,
- am, da, db, mir, xhp,
- cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
- acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
- cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
- cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
- hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
- kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
- kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
- khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
- knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
- memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
- pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
- pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
- pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
- rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
- rmul=\E&d@,
- sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
- sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
- smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
-# HPUX 11 provides a color version.
-hpterm-color|HP X11 terminal emulator with color,
- ccc,
- colors#64, pairs#8,
- home=\E&a0y0C,
- initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
- op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
+# This version was released in XFree86 4.4.
+xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System),
+ use=att610+cvis, use=ecma+index, use=xterm-xf86-v43,
-#### EMU
-# This is for the extensible terminal emulator on the X11R6 contrib tape.
-# It corresponds to emu's internal emulation:
-# emu -term emu
-# emu's default sets TERM to "xterm", but that doesn't work well -TD
-# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
-# fixes: add civis, cnorm, sgr -TD
-emu|emu native mode,
- am, bce, mir, msgr, xon,
- colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
- acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
- bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
- cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
- cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
- cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
- dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
- ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
- hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
- is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
- kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01,
- kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
- kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
- kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
- kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
- kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
- op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
- rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
- setaf=\Er%i%p1%d;,
- sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
- sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
+xterm-xfree86|xterm terminal emulator (XFree86),
+ use=xterm-xf86-v44,
-# vt220 Terminfo entry for the Emu emulation, corresponds to
-# emu -term vt220
-# with NumLock set (to make the keypad transmit kf0-kf9).
-# fixes: add am, xenl, corrected sgr0 -TD
-emu-220|Emu-220 (vt200-7bit mode),
- am, xenl, xon,
- cols#80, it#8, lines#24, vt#200,
- acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
- blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l,
- clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
- cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
- dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
- ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
- hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
- il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
- kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
- kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
- kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
- kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
- kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
- kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
- kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
- knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
- ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
- rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
- sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
- smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
+# This version reflects the current xterm features.
+xterm-new|modern xterm terminal emulator,
+ npc,
+ kcbt=\E[Z, kent=\EOM, use=ecma+index, use=ansi+rep,
+ use=ecma+strikeout, use=xterm+keypad, use=vt420+lrmm,
+ use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm+tmux,
+ use=xterm-basic,
-#### MVTERM
-# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
-# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
-# indicate that it emulates more than one terminal, but incompletely.
+# This fragment is for people who cannot agree on what the backspace key
+# should send.
+xterm+kbs|fragment for backspace key,
+ kbs=^H,
#
-# This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
-# It is based on vt102's entry, with some subtle differences, but also
-# has status line
-# supports ANSI colors (except for 'op' string)
-# apparently implements alternate screen like xterm
-# does not use padding, of course.
-mvterm|vv100|SwitchTerm aka mvTERM,
- am, eslok, hs, km, mir, msgr, xenl,
- colors#8, cols#80, it#8, lines#24, pairs#64,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
- fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
- kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
- op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
- rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
- rmul=\E[m,
- rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
- sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
- smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
+# This fragment describes as much of XFree86 xterm's "pc-style" function
+# keys as will fit into terminfo's 60 function keys.
+# From ctlseqs.ms:
+# Code Modifiers
+# ---------------------------------
+# 2 Shift
+# 3 Alt
+# 4 Shift + Alt
+# 5 Control
+# 6 Shift + Control
+# 7 Alt + Control
+# 8 Shift + Alt + Control
+# ---------------------------------
+# The meta key may also be used as a modifier in this scheme, adding another
+# bit to the parameter.
+xterm+pcfkeys|fragment for PC-style fkeys,
+ use=xterm+app, use=xterm+pcf2, use=xterm+pcc2,
+ use=xterm+pce2,
+#
+xterm+noapp|fragment with cursor keys in normal mode,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F,
+ khome=\E[H,
-#### MTERM
+xterm+app|fragment with cursor keys in application mode,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF,
+ khome=\EOH,
#
-# This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
+# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
+# and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
+# copied the earlier scheme, as noted in the "use=" clauses in this file.
#
-# "mterm -type ansi" sets $TERM to "ansi"
-mterm-ansi|ANSI emulation,
- am, bw, mir, msgr,
- it#8,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
- cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
- dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
- el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
- il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS,
- invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m,
- ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m,
- rmul=\E[24m,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m,
- vpa=\E[%i%p1%dd,
-# mterm normally sets $TERM to "mterm"
-mterm|mouse-sun|Der Mouse term,
- am, bw, mir,
- it#8,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S,
- cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
- home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W,
- rmir=^O, rmso=^T, smir=^Q, smso=^V,
-# "mterm -type decansi" sets $TERM to "decansi"
+# The original assignments from patch #94 for cursor-keys had some technical
+# issues:
#
-# note: kdch1, kfnd, kslt are in the source code, but do not work -TD
-decansi|ANSI emulation with DEC compatibility hacks,
- am, mir, msgr, xenl,
- colors#8, it#8, pairs#64,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
- dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
- home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
- il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m,
- is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB,
- kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
- kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
- kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
- kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
- kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m,
- ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
- rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
- u7=\E[6n, vpa=\E[%i%p1%dd,
-
-#### VWM
+# A parameter for a function-key to represent a modifier is just more
+# bits. But for a cursor-key it may change the behavior of the
+# application. For instance, emacs decodes the first parameter of a
+# cursor-key as a repeat count.
+#
+# A parameterized string should (really) not begin with SS3 (\EO).
+# Rather, CSI (\E[) should be used.
#
-# vwmterm is a terminal emulator written for the VWM console window manager
+# For these reasons, the original assignments were deprecated. For
+# compatibility reasons, they are still available as a setting of xterm's
+# modifyCursorKeys resource. These fragments list the modified cursor-keys
+# that might apply to xterm+pcfkeys with different values of that resource.
#
-vwmterm|(vwm term),
- am, bce, ccc, mir, msgr, npc, xenl, xon,
- colors#8, pairs#64,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
- cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
- cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
- home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
- kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
- kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
- kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
- rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
- sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
- smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
-
-#### MGR
+# These entries will have warnings when checking with tic because the kri/kind
+# capabilities duplicate the kUP/kDN extensions. This is intentional, though
+# not part of the original plan. The changes for xterm patch #206 (2005/11/3)
+# show that kri/kind were seen much later as part of a set including kLFT/kRIT:
#
-# MGR is a Bell Labs window system lighter-weight than X.
-# These entries describe MGR's xterm-equivalent.
-# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
+# * modify xterm-new terminfo entry to use capabilities for shifted
+# scroll forward/reverse as shifted cursor up/down.
#
+# In the 1980s when terminfo was defined, the developers made more of
+# a distinction between shifted up/down versus shifted left/right since most
+# terminals can index (scroll up/down), while few can scroll left/right.
+xterm+pcc3|fragment with modifyCursorKeys:3,
+ kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B,
+ kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B,
+ kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B,
+ kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D,
+ kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C,
+ kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C,
+ kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A,
+ kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A,
+ kUP7=\E[>1;7A,
-mgr|Bellcore MGR (non X) window system terminal emulation,
- am, km,
- bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
- csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
- cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
- dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
- dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
- ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
- il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
- rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
- smul=\E4n,
-mgr-sun|Mgr window with Sun keyboard,
- ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
- kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
- kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
- kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
- kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
- kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
- kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
-mgr-linux|Mgr window with Linux keyboard,
- ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
- kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
- kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
+xterm+pcc2|fragment with modifyCursorKeys:2,
+ kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A,
+ kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B,
+ kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D,
+ kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D,
+ kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C,
+ kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A,
+ kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A,
+
+xterm+pcc1|fragment with modifyCursorKeys:1,
+ kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B,
+ kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B,
+ kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D,
+ kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C,
+ kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A,
+ kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A,
+
+xterm+pcc0|fragment with modifyCursorKeys:0,
+ kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B,
+ kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B,
+ kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D,
+ kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C,
+ kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A,
+ kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A,
-#### SIMPLETERM
-# st.suckless.org
-# st-0.1.1
-#
-# Note: the original terminfo description uses leading blank to persuade
-# ncurses to use "st" as its name. Proper fix for that is to use "st" as an
-# alias.
#
-# Reading the code shows it should work for aixterm 16-colors
-# - added st-16color
+# Here are corresponding fragments from xterm patch #216:
#
-# Using tack:
-# - set eo (erase-overstrike)
-# - set xenl
-# - tbc doesn't work
-# - hts works
-# - cbt doesn't work
-# - shifted cursor-keys send sequences like rxvt
-# - sgr referred to unimplemented "invis" mode.
-# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
-simpleterm|st| simpleterm,
- am, eo, mir, msgr, ul, xenl,
- colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
- cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
- hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
- il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
- kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
- kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
- rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
- sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
-st-16color|simpleterm with 16-colors,
- use=ibm+16color, use=simpleterm,
-# 256 colors "works", but when running xterm's test-scripts, some garbage is
-# shown in the titlebar.
-st-256color|simpleterm with 256 colors,
- ccc@,
- initc@, use=xterm+256color, use=simpleterm,
-
-### TERMINATOR
-# http://software.jessies.org/terminator/
-# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
-# Debian/current -TD (2011/8/20)
-#
-# There are some packaging problems:
-# a) using Java, the program starts off using 50Mb, and climbs from there,
-# up to 114Mb after testing (no scrollback).
-# b) it insists on reinstalling its terminal description in $HOME/.terminfo
-# (two copies, just in case the host happens to be Mac OS X).
-# I deleted this after testing with tack.
-#
-# Issues/features found with tack:
-# a) tbc does not work (implying that hts also is broken).
-# Comparing with the tabs utility shows a problem with the last tabstop on
-# a line.
-# b) has xterm-style shifted function-key strings
-# meta also is used, but control is ignored.
-# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
-# d) some combinations of shift/control send xterm-style sequences for
-# insert/delete/home/end.
-# e) numeric keypad sends only numbers (compare with vttest).
-# f) meta mode (km) is not implemented.
-#
-# Issues found with ncurses test-program:
-# a) bce is inconsistently implemented
-# b) widths of Unicode values above 256 do not always agree with wcwidth.
-#
-# Checked with vttest, found low degree of compatibility there.
+xterm+pcf0|fragment with modifyFunctionKeys:0,
+ kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
+ kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
+ kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
+ kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
+ kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
+ kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
+ kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
+ kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
+ kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
+ kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
+ kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
+ kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
+ kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
+ kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~,
+ kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P,
+ kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
#
-# Checked with xterm's scripts, found that the 256-color palette is fixed.
+xterm+pcf2|fragment with modifyFunctionKeys:2,
+ kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S,
+ kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ,
+ kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
+ kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q,
+ kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR,
+ kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
+ kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
+ kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R,
+ kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~,
+ kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
+ kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~,
+ kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R,
+ kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
+ kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
+ kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
+ kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~,
#
-# Fixes:
-# a) add sgr string
-# b) corrected sgr0 to reset alternate character set
-# c) modified smacs/rmacs to use SCS rather than SI/SO
-# d) removed bce
-# e) removed km
-terminator|Terminator no line wrap,
- eo, mir, msgr, xenl, xon,
- colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
- cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
- dl=\E[%p1%dM, dl1=\E[M, dsl=\E]2;\007, ed=\E[J, el=\E[K,
- el1=\E[1K, enacs=\E(B\E)0, flash=^G, fsl=^G, home=\E[H,
- hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
- ind=^J, is1=\E[?47l\E=\E[?1l,
- is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
- kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
- op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
- rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
- rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
- rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
- s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
- setaf=\E[38;5;%p1%dm,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%;m%?%p9%t\E(0%e\E(B%;,
- sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
- smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1,
- vpa=\E[%i%p1%dd,
+# Chunks from xterm #230:
+xterm+pce2|fragment with modifyCursorKeys:2,
+ kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~,
+ kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~,
+ kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F,
+ kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F,
+ kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H,
+ kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~,
+ kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~,
+ kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~,
+ kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~,
+ kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~,
+ use=xterm+edit,
-######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
-#
+xterm+edit|fragment for 6-key editing-keypad,
+ kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ use=xterm+pc+edit,
-# Columbus UNIX virtual terminal. This terminal also appears in
-# UNIX 4.0 and successors as line discipline 1 (?), but is
-# undocumented and does not really work quite right.
-cbunix|cb unix virtual terminal,
- OTbs, am, da, db,
- cols#80, lines#24, lm#0,
- bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
- el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
- smso=\Ea^D, smul=\Ea^A,
-# (vremote: removed obsolete ":nl@:" -- esr)
-vremote|virtual remote terminal,
- am@,
- cols#79, use=cbunix,
+xterm+pc+edit|fragment for pc-style editing keypad,
+ kend=\E[4~, khome=\E[1~,
-pty|4bsd pseudo teletype,
- cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
- smso=\Ea$, smul=\Ea!, use=cbunix,
+xterm+vt+edit|fragment for vt220-style editing keypad,
+ kfnd=\E[1~, kslt=\E[4~,
-# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
-eterm|gnu emacs term.el terminal emulation,
- am, mir, xenl,
- cols#80, lines#24,
- bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
- rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
- smul=\E[4m,
+# These variations for alternate-screen and title-stacking were introduced by
+# xterm patch #331:
+xterm+noalt|xterm without altscreen,
+ rmcup@, smcup@,
-# The codes supported by the term.el terminal emulation in GNU Emacs 22.2
-eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
- am, mir, msgr, xenl,
- colors#8, cols#80, lines#24, pairs#64,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
- knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
- ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
- sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
- sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
- sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
- u6=\E[%i%d;%dR, u7=\E[6n,
+xterm+alt1049|xterm 90 feature,
+ rmcup=\E[?1049l, smcup=\E[?1049h,
-# Entries for use by the `screen' program by Juergen Weigert,
-# Michael Schroeder, Oliver Laumann. The screen and
-# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
-# come from University of Wisconsin and may be older.
-# (screen: added <cnorm> on ANSI model -- esr)
+xterm+titlestack|xterm 251 feature,
+ rmcup=\E[23;0;0t, smcup=\E[22;0;0t,
+
+xterm+alt+title|xterm 90 and 251 features combined,
+ rmcup=\E[?1049l\E[23;0;0t, smcup=\E[?1049h\E[22;0;0t,
+
+# https://invisible-island.net/xterm/xterm.faq.html#xterm_keypad
#
-# 'screen' defines extensions to termcap. Some are used in its terminal
-# description:
-# G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
-# AX (bool) Does understand ANSI set default fg/bg color
-# (\E[39m / \E[49m).
-# S0 (str) Switch charset 'G0' to the specified charset.
-# E0 (str) Switch charset 'G0' back to standard charset.
+# Xterm's emulation of the VT100 numeric keypad on a PC-keyboard runs into the
+# problem that the keypad layout is different, and that the natural choice for
+# PF1 is NumLock (which happens to be reserved for other use). To work around
+# that, PF1-PF4 are emulated via F1-F4, which leaves the "/", "*" and "+" not
+# directly related to VT100.
#
-# tested with screen 3.09.08
-screen|VT 100/ANSI X3.64 virtual terminal,
- OTbs, OTpt, am, km, mir, msgr, xenl, G0,
- colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
- acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
- cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
- flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
- nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
- rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
- rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
- S0=\E(%p1%c, use=ecma+color,
-# The bce and status-line entries are from screen 3.9.13 (and require some
-# changes to .screenrc).
-screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
- bce,
- ech@, use=screen,
-screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
- dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
+# With the VT220 keypad block that uses the 1-9 keys as suggested in
+# terminfo(5), the other keys can be handled with user-defined capabilities:
+#
+# _______________________________________
+# | NumLock | / | * | - |
+# | | $Oo | $Oj | $OS |
+# |_________|__kpDIV__|__kpMUL__|__kpSUB__|
+# | 7 8 9 | |
+# | $Ow | $Ox | $Oy | + |
+# |_ka1__K1_|_________|_ka3__K3_| $Ok |
+# | 4 | 5 | 6 | kpADD |
+# | $Ot | $Ou | $Ov | |
+# |_________|_kb2__K2_|_________|_________|
+# | 1 | 2 | 3 | |
+# | $Oq | $Or | $Os | |
+# |_kc1__K4_|_________|_kc3__K5_| enter |
+# | 0 | . | $OM |
+# | $Op | $On | |
+# |___________________|_________|_kent_@8_|
+#
+xterm+keypad|xterm emulating VT100/VT220 numeric keypad,
+ kp5=\EOE, kpADD=\EOk, kpCMA=\EOl, kpDIV=\EOo, kpDOT=\EOn,
+ kpMUL=\EOj, kpSUB=\EOm, kpZRO=\EOp, use=vt220+keypad,
+#
+# Those chunks use the new-style (the xterm oldFunctionKeys resource is false).
+# Alternatively, the same scheme with old-style function keys as in xterm-r6
+# is shown here (because that is used in mrxvt and mlterm):
+xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2,
+ kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~,
+ kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~,
+ kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~,
+ kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~,
+ kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~,
+ kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~,
+ kf63=\E[13;4~, use=xterm+pcf2,
+#
+# This chunk is used for building the VT220/Sun/PC keyboard variants.
+xterm-basic|modern xterm terminal emulator - common,
+ OTbs, am, bce, mir, msgr, xenl, AX, XT,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\n, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>,
+ kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8,
+ rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
+ rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
+ %?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
+ sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, E3=\E[3J, use=ecma+italics, use=ansi+pp,
+ use=xterm+kbs, use=xterm+alt+title, use=ansi+enq,
+ use=att610+cvis, use=xterm+meta,
-# ======================================================================
-# Entries for GNU Screen with 16 colors.
-# Those variations permit to benefit from 16 colors palette, and from
-# bold font and blink attribute separated from bright colors. But they
-# are less portable than the generic "screen" 8 color entries: Their
-# usage makes real sense only if the terminals you attach and reattach
-# do all support 16 color palette.
+xterm+meta|meta mode for xterm,
+ km,
+ rmm=\E[?1034l, smm=\E[?1034h,
-screen-16color|GNU Screen with 16 colors,
- use=ibm+16color, use=screen,
+# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
+# In retrospect, something like xterm-r6 was intended here -TD
+xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
+ rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
-screen-16color-s|GNU Screen with 16 colors and status line,
- use=ibm+16color, use=screen-s,
+#### XTERM Colors
-screen-16color-bce|GNU Screen with 16 colors and BCE,
- use=ibm+16color, use=screen-bce,
+# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
+# (T.Dickey)
+#
+# If configured to support 88- or 256-colors (which is fairly common in 2009),
+# xterm also recognizes the control sequences for initc -TD
+xterm-16color|xterm with 16 colors like aixterm,
+ ccc,
+ initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
+ %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
+ use=xterm+osc104, use=ibm+16color, use=xterm-new,
-screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
- bce, use=ibm+16color, use=screen-s,
+# 256-colors is a compile-time feature of XFree86 xterm beginning with
+# xterm patch #111 (1999/7/10) -TD
+xterm+256color|original xterm 256-color feature,
+ ccc,
+ colors#0x100, pairs#0x10000,
+ initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
+ %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
+ oc=\E]104\007,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
+ 5;%p1%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
+ ;%p1%d%;m,
+ setb@, setf@,
-# ======================================================================
-# Entries for GNU Screen 4.02 with --enable-colors256.
+# The semicolon separator used in xterm+256color does not follow the ECMA-48
+# standard. Since patch #282 (in 2012), xterm has supported both the legacy
+# subparameter separator (semicolon) and the standard (colon).
+#
+# The xterm FAQ gives some of the history:
+# https://invisible-island.net/xterm/xterm.faq.html#color_by_number
+xterm+256color2|xterm 256-color feature,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48
+ \:5\:%p1%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38\:
+ 5\:%p1%d%;m,
+ use=xterm+256color,
+
+# xterm OSC 104 resets the color palette. Using it as part of xterm+256color
+# has the drawback that some of the xterm-alikes which use that building block
+# require a different approach to rs1 -TD
+xterm+osc104|reset color palette,
+ oc=\E]104\007, rs1=\Ec\E]104\007,
-screen-256color|GNU Screen with 256 colors,
+# palette is hardcoded...
+xterm+256setaf|xterm 256-color (set-only),
ccc@,
- initc@, use=xterm+256color, use=screen,
+ colors#0x100, pairs#0x10000,
+ initc@, op=\E[39;49m,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
+ 5;%p1%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
+ ;%p1%d%;m,
+ setb@, setf@,
-screen-256color-s|GNU Screen with 256 colors and status line,
- ccc@,
- initc@, use=xterm+256color, use=screen-s,
-
-screen-256color-bce|GNU Screen with 256 colors and BCE,
- ccc@,
- initc@, use=xterm+256color, use=screen-bce,
+# 88-colors is a compile-time feature of XFree86 xterm beginning with
+# xterm patch #115 (1999/9/18) -TD
+#
+# Note that the escape sequences used are the same as for 256-colors - xterm
+# has a different table of default color resource values. If built for
+# 256-colors, it can still handle an 88-color palette by using the initc
+# capability.
+#
+# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals
+# which support the xterm+256color feature support the associated initc
+# capability. So it is cancelled in the entries which use this and/or the
+# xterm+256color block.
+#
+# The default color palette for the 256- and 88-colors are different. A
+# given executable will have one palette (perhaps compiled-in). If the program
+# supports xterm's control sequence, it can be programmed using initc.
+xterm+88color|original xterm 88-color feature,
+ colors#88, pairs#7744, use=xterm+256color,
-screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
- bce, ccc@,
- initc@, use=xterm+256color, use=screen-s,
+xterm+88color2|xterm 88-color feature,
+ colors#88, pairs#7744, use=xterm+256color2,
-# ======================================================================
+# These variants of XFree86 3.9.16 xterm are built as a configure option.
+xterm-256color|xterm with 256 colors,
+ use=xterm+osc104, use=xterm+256color, use=xterm-new,
+xterm-88color|xterm with 88 colors,
+ use=xterm+osc104, use=xterm+88color,
+ use=xterm-256color,
+
+# Emacs 26.1 and later support direct color mode in terminals, using a
+# combination of user-defined capabilities and ncurses-dependent function
+# calls. We will not include that here.
+#
+# Here is a first revision, which (disregarding the reuse of colors 1-7 which
+# is of interest only to the numerically illiterate), is compatible with other
+# terminal descriptions written for curses. It relies upon the extended range
+# for numeric capabilities provided in ncurses 6.1:
+xterm+direct2|xterm with direct-color indexing,
+ RGB,
+ colors#0x1000000, pairs#0x10000, CO#8,
+ initc@, op=\E[39;49m,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
+ setb@, setf@,
+xterm-direct2|xterm with direct-color indexing (old),
+ use=xterm+direct2, use=xterm+titlestack, use=xterm,
+
+# That in turn had a problem: in the original patch submitted for KDE konsole
+# in 2006, the submitter and the developer alike overlooked a "color space
+# identifier" parameter. This version provides for that parameter:
+xterm+direct|xterm with direct-color indexing,
+ RGB,
+ colors#0x1000000, pairs#0x10000, CO#8,
+ initc@, op=\E[39;49m,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e48\:2\:\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e38\:2\:\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
+ setb@, setf@,
+xterm-direct|xterm with direct-color indexing,
+ use=xterm+direct, use=xterm,
+
+# Here are corresponding flavors for terminals which could use the feature:
+iterm2-direct|iTerm2 with direct-color indexing,
+ use=xterm+direct, use=iterm2,
+mlterm-direct|mlterm with direct-color indexing,
+ use=xterm+direct, use=mlterm,
+
+# Meanwhile, in KDE #107487, the patch submitter and the developer both saw
+# that xterm's original implementation should have used colons for the
+# subparameter separators, but chose not to correct this in konsole. As of
+# late 2017, konsole still accepts only the nonstandard semicolon delimiters.
+xterm+indirect|xterm with direct-color indexing (old),
+ RGB,
+ colors#0x1000000, pairs#0x10000,
+ initc@, op=\E[39;49m,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e48;2;%p1%{65536}%/%d;%p1%{256}
+ %/%{255}%&%d;%p1%{255}%&%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e38;2;%p1%{65536}%/%d;%p1%{256}
+ %/%{255}%&%d;%p1%{255}%&%d%;m,
+ setb@, setf@,
+konsole-direct|konsole with direct-color indexing,
+ use=xterm+indirect, use=konsole,
+st-direct|st with direct-color indexing,
+ use=xterm+indirect, use=st,
+vte-direct|vte with direct-color indexing,
+ use=xterm+indirect, use=vte,
+# reportedly in Apple's Mohave (fall 2018), but untested -TD
+nsterm-direct|nsterm with direct-color indexing,
+ use=xterm+indirect, use=nsterm,
+
+# As for others (commenting at the time of release for ncurses 6.1):
+# + Apple's Terminal.app does not recognize either form of the direct-color
+# sequences.
+# + Cygwin's mintty recognizes xterm's original implementation, does okay with
+# the colors. Like vte, it is a subset of xterm, although different
+# omissions/reservations of modified-keys are seen in testing.
+# + PuTTY 0.70 seems to recognize xterm's original implementation but does
+# nothing useful with the colors.
+# + Teraterm 4.97, like PuTTY (no good).
+# + terminology 0.91 recognizes xterm's original implementation, but does
+# nothing useful with it.
+
+# Reviewing after ncurses 6.2:
+# + Apple's Terminal.app is unchanged, has no support for direct color:
+# Catalina 10.15.5 Terminal.app 2.10 (433)
+# Mohave 10.14.6 - Terminal.app 2.9.5 (421.2)
+# + Cygwin's mintty 3.1.7 works with colon/semicolon
+# + PuTTY 0.73 works with semicolon
+# + Teraterm 4.105 works with semicolon
+# + terminology 1.7.0 works with colon/semicolon.
+
+# Other variants are possible, e.g., by using more of xterm's indexed color
+# palette, though the intrusion of indexed colors on the direct-color space
+# would be more noticeable.
+
+xterm+direct16|xterm with direct-color indexing,
+ CO#16,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e%?%p1%{16}%<%t%p1%{92}%+%e48\:
+ 2\:\:%p1%{65536}%/%d\:%p1%{256}%/%{255}%&%d\:%p1%{255}
+ %&%d%;%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e%?%p1%{16}%<%t%p1%'R'%+%e38\:2
+ \:\:%p1%{65536}%/%d\:%p1%{256}%/%{255}%&%d\:%p1%{255}
+ %&%d%;%;m,
+ setb@, setf@, use=xterm+direct,
+
+xterm-direct16|xterm with direct-colors and 16 indexed colors,
+ use=xterm, use=xterm+direct16,
+
+xterm+direct256|xterm with direct-color indexing,
+ CO#0x100,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e%?
+ %p1%{256}%<%t48;5;%p1%d%e48\:2\:\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e%?
+ %p1%{256}%<%t38;5;%p1%d%e38\:2\:\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;%;m,
+ setb@, setf@, use=xterm+direct,
+
+xterm-direct256|xterm with direct-colors and 256 indexed colors,
+ use=xterm, use=xterm+direct256,
+
+#### XTERM Features
-# Read the fine manpage:
-# When screen tries to figure out a terminal name for
-# itself, it first looks for an entry named "screen.<term>",
-# where <term> is the contents of your $TERM variable. If
-# no such entry exists, screen tries "screen" (or "screen-w"
-# if the terminal is wide (132 cols or more)). If even this
-# entry cannot be found, "vt100" is used as a substitute.
+# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
+# asked for some of xterm's advanced features to be added to its terminfo
+# entry. It defines extended capabilities not found in standard terminfo or
+# termcap. These are useful in tmux, for instance, hence the name.
#
-# Notwithstanding the manpage, screen uses its own notion of the termcap
-# and some keys from "screen.<term>" are ignored. Here is an entry which
-# covers those (tested with screen 4.00.02) -TD
-screen+fkeys|function-keys according to screen,
- kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
- khome=\E[1~, kslt@,
+# One caveat in adding extended capabilities in ncurses is that if the names
+# are longer than two characters, then they will not be visible through the
+# termcap interface.
#
-# Here are a few customized entries which are useful -TD
+# Ms modifies the selection/clipboard. Its parameters are
+# p1 = the storage unit (clipboard, selection or cut buffer)
+# p2 = the base64-encoded clipboard content.
#
-# Notes:
-# (a) screen does not support invis.
-# (b) screen's implementation of bw is incorrect according to tack.
-# (c) screen appears to hardcode the strings for khome/kend, making it
-# necessary to override the "use=" clause's values (screen+fkeys).
-# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
-# which is NOT the same as the terminfo screen.<term>.
-# (e) when screen finds one of these customized entries, it sets $TERM to
-# match. Hence, no "screen.xterm" entry is provided, since that would
-# create heartburn for people running remote xterm's.
+# Ss is used to set the cursor style as described by the DECSCUSR
+# function to a block or underline.
+# Se resets the cursor style to the terminal power-on default.
#
-# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
-# since the default translations override the built-in keycode
-# translation. They are suppressed here to show what is tested by tack.
-screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
- bce@, bw,
- invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
- sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
- use=screen+fkeys, use=xterm-new,
-# xterm-r6 does not really support khome/kend unless it is propped up by
-# the translations resource.
-screen.xterm-r6|screen customized for X11R6 xterm,
- bw, use=screen+fkeys, use=xterm-r6,
-# Color applications running in screen and TeraTerm do not play well together
-# on Solaris because Sun's curses implementation gets confused.
-screen.teraterm|disable ncv in teraterm,
- ncv#127,
- acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- use=screen+fkeys, use=screen,
-# Other terminals
-screen.rxvt|screen in rxvt,
- bw, XT,
- cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
- kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
- use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
-screen.Eterm|screen in Eterm,
- use=screen+fkeys, use=Eterm,
-screen.mrxvt|screen in mrxvt,
- use=screen+fkeys, use=mrxvt,
-screen.vte|screen in any VTE-based terminal,
- use=screen+fkeys, use=vte,
-screen.gnome|screen in GNOME Terminal,
- use=screen+fkeys, use=gnome,
-screen.konsole|screen in KDE console window,
- use=screen+fkeys, use=konsole,
-# fix the backspace key
-screen.linux|screen in linux console,
- bw,
- kbs=\177, kcbt@, use=screen+fkeys, use=screen,
-screen.mlterm|screen in mlterm,
- use=screen+fkeys, use=mlterm,
+# Cs and Cr set and reset the cursor colour.
+xterm+tmux|advanced xterm features used in tmux,
+ Cr=\E]112\007, Cs=\E]12;%p1%s\007,
+ Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
-# The default "screen" entry is reasonably portable, but not optimal for the
-# most widely-used terminal emulators. The "bce" capability is supported in
-# screen since 3.9.13, and when used, will require fewer characters to be sent
-# to the terminal for updates.
+# This is another variant, for XFree86 4.0 xterm (T.Dickey)
+# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
+# To use it, your decTerminalID resource must be set to 200 or above.
#
-# If you are using only terminals which support bce, then you can use this
-# feature in your screen configuration.
+# HTS \E H \210
+# RI \E M \215
+# SS3 \E O \217
+# CSI \E [ \233
#
-# Adding these lines to your ".screenrc" file will allow using these customized
-# entries:
-# term screen-bce
-# bce on
-# defbce on
-screen-bce.xterm-new|screen optimized for modern xterm,
- bce,
- ech@, use=screen.xterm-new,
-screen-bce.rxvt|screen optimized for rxvt,
- bce,
- ech@, use=screen.rxvt,
-screen-bce.Eterm|screen optimized for Eterm,
- bce,
- ech@, use=screen.Eterm,
-screen-bce.mrxvt|screen optimized for mrxvt,
- bce,
- ech@, use=screen.mrxvt,
-screen-bce.gnome|screen optimized for GNOME-Terminal,
- bce,
- ech@, use=screen.gnome,
-screen-bce.konsole|screen optimized for KDE console window,
- bce,
- ech@, use=screen.konsole,
-screen-bce.linux|screen optimized for linux console,
- bce,
- ech@, use=screen.linux,
-screen-bce.mlterm|screen optimized for mlterm,
- bce,
- ech@, use=screen.mlterm,
+xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
+ OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
+ civis=\233?25l, clear=\233H\2332J,
+ cnorm=\233?25l\233?25h, cr=\r, csr=\233%i%p1%d;%p2%dr,
+ cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=\n,
+ cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
+ cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
+ dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
+ ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
+ flash=\233?5h$<100/>\233?5l, home=\233H,
+ hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
+ il=\233%p1%dL, il1=\233L, ind=\n, invis=\2338m,
+ is2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
+ \E8,
+ ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
+ kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
+ kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
+ kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
+ kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
+ kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
+ kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
+ kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
+ kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
+ knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
+ meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
+ ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
+ rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
+ rs1=\Ec,
+ rs2=\E[62"p\E\sG\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r
+ \E8,
+ sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
+ setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
+ %{6}%=%t3%e%p1%d%;m,
+ setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1
+ %{6}%=%t3%e%p1%d%;m,
+ sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
+ smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
+ smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
+ u7=\E[6n, u8=\233[?%[;0123456789]c, u9=\E[c,
+ vpa=\233%i%p1%dd, use=xterm+kbs,
-screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
- cols#132, use=screen,
+xterm-hp|xterm with hpterm function keys,
+ kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
+ kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
+ knp=\ES, kpp=\ET, use=xterm-basic,
-screen2|old VT 100/ANSI X3.64 virtual terminal,
- cols#80, it#8, lines#24,
- cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
- il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
- kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
- nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
- rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
- smso=\E[3m, smul=\E[4m, tbc=\E[3g,
-# (screen3: removed unknown ":xv:LP:G0:" -- esr)
-screen3|older VT 100/ANSI X3.64 virtual terminal,
- km, mir, msgr,
+xterm-sco|xterm with SCO function keys,
+ kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=^?, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
+ kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
+ kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
+ kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
+ kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
+ kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
+ kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
+ kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
+ kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
+ kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
+ kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I,
+ use=xterm-basic,
+
+# The xterm-new description has all of the features, but is not completely
+# compatible with vt220. If you are using a Sun or PC keyboard, set the
+# sunKeyboard resource to true:
+# + maps the editing keypad
+# + interprets control-function-key as a second array of keys, so a
+# 12-fkey keyboard can support vt220's 20-fkeys.
+# + maps numeric keypad "+" to ",".
+# + uses DEC-style control sequences for the application keypad.
+#
+xterm-vt220|xterm emulating vt220,
+ kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ use=xterm+app, use=xterm+edit, use=xterm-basic,
+ use=vt220+keypad,
+
+xterm-vt52|xterm emulating dec vt52,
cols#80, it#8, lines#24,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
- cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
- kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
- rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
- sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
- smul=\E[4m, tbc=\E[3g,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, clear=\EH\EJ, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
+ home=\EH, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, nel=\r\n, ri=\EI, rmacs=\EG, smacs=\EF,
+ use=xterm+kbs, use=vt52+keypad,
-# Francesco Potorti <F.Potorti@cnuce.cnr.it>:
-# NCSA telnet is one of the most used telnet clients for the Macintosh. It has
-# been maintained until recently by the National Center for Supercomputer
-# Applications, and it is feature rich, stable and free. It can be downloaded
-# from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
-# xterm+sl, and the docs at NCSA. It works well.
+xterm-noapp|xterm with cursor keys in normal mode,
+ rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
+ use=xterm,
+
+xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
+ lines#24, use=xterm-old,
+
+# This is xterm for ncurses.
+xterm|xterm terminal emulator (X Window System),
+ use=xterm-new,
+
+# This entry assumes that xterm's handling of VT100 SI/SO is disabled by
+# setting the vt100Graphics resource to false.
+xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
+ U8#1, use=xterm,
+
+# These building-blocks allow access to the X titlebar and icon name as a
+# status line. There are a few problems in using them in entries:
#
-# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
-# The terminal options should be set as follows:
-# Xterm sequences ON
-# use VT wrap mode ON
-# use Emacs arrow keys OFF
-# CTRL-COMND is Emacs meta ON
-# 8 bit mode ON
-# answerback string: "ncsa-vt220-8"
-# setup keys: all disabled
+# a) tsl should have a parameter to denote the column on which to transfer to
+# the status line.
+# b) the "0" code for xterm updates both icon-title and window title. Some
+# window managers such as twm (and possibly window managers descended from
+# it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
+# don't want to mess with icon-name when using those window managers.
#
-# Application mode is not used.
+# The extension "TS" is preferable, because it does not accept a parameter.
+# However, if you are using a non-extended terminfo, "TS" is not visible.
+xterm+sl|access X title line and icon name,
+ hs,
+ dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
+xterm+sl-twm|access X title line (pacify twm-descended window managers),
+ hs,
+ dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
+
+# In contrast, this block can be used for a DEC vt320 and up. There are two
+# controls used.
#
-# Other special mappings:
-# Apple VT220
-# HELP Find
-# HOME Insert here
-# PAGEUP Remove
-# DEL Select
-# END Prev Screen
-# PAGEDOWN Next Screen
+# DECSASD (select active status display)
+# \E[0$} Main display
+# \E[1$} Status line
#
-# Though it supports ANSI color, NCSA Telnet uses color to represent blinking
-# text.
+# DECSSDT (select status line type)
+# \E[0$~ No status line
+# \E[1$~ Indicator status line
+# \E[2$~ Host-writable status line
#
-# The status-line manipulation is a mapping of the xterm-compatible control
-# sequences for setting the window-title. So you must use tsl and fsl in
-# pairs, since the latter ends the string that is loaded to the window-title.
-ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
- am, km, mir, msgr, xenl,
- acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l,
- home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
- ind=\n$<150*>,
- is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
- kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
- kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
- kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
- khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
- rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
- rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
- rmso=\E[27m, rmul=\E[24m,
- rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
- sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
- smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
-ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
- use=ncsa-m, use=klone+color,
-ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
- hs@,
- dsl@, fsl@, tsl@, use=ncsa,
-ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
- hs@,
- dsl@, fsl@, tsl@, use=ncsa-m,
-# alternate -TD:
-# The documented function-key mapping refers to the Apple Extended Keyboard
-# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
-# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
-# some keyboards and many applications require these as F1-F4.
+# The building block assumes that the terminal always shows something at the
+# status line (either the indicator, or status line). That is because if no
+# status line is used, then the terminal makes that line part of the user
+# window, changing its size without notice.
#
-ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
- kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
- kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
- kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
- kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, use=ncsa,
-
-#### Pilot Pro Palm-Top
+# Because there is no "esl" (enable status line) capability, the "tsl"
+# capability ensures that the status line is host-writable. A DEC terminal
+# will clear the status line when changing from indicator to host-writable
+# mode.
#
-# Termcap for Top Gun Telnet and SSH on the Palm Pilot.
-# http://www.ai/~iang/TGssh/
-pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
- OTbs, am, xenl,
- cols#39, lines#16,
- bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
- cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
- ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
- rmso=\EB, smso=\Eb,
-
-# From: Federico Bianchi <bianchi@www.arte.unipi.it>
-# These entries are for the Embeddable Linux Kernel System (ELKS)
-# project - an heavily stripped down Linux to be run on 16 bit
-# boxes or, eventually, to be used in embedded systems - and have been
-# adapted from the stock ELKS termcap. The project itself looks stalled,
-# and the latest improvements I know of date back to March 2000.
+# Once on the status line, the row part of cursor addressing is ignored. Since
+# tsl expects a parameter (to specify the column), the shortest addressing that
+# can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
#
-# To cope with the ELKS dumb console I added an "elks-glasstty" entry;
-# as an added bonus, this deals with all the capabilities common to
-# both VT52 and ANSI (or, eventually, "special") modes.
+dec+sl|DEC VTxx status line,
+ eslok, hs,
+ dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
-elks-glasstty|ELKS glass-TTY capabilities,
- OTbs, am,
- cols#80, it#8, lines#25,
- bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
- nel=^M^J,
+#
+# The following xterm variants don't depend on your base version
+#
+# xterm with bold instead of underline
+xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
+ sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|
+ %t;7%;m,
+ smso=\E[7m, smul=\E[1m, use=xterm-old,
-elks-vt52|ELKS vt52 console,
- clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
- home=\EH, use=elks-glasstty,
+# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
+xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
+ ich@, ich1@, use=xterm,
+# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
+xterm1|xterm terminal emulator ignoring the alternate screen buffer,
+ rmcup@, smcup@, use=xterm,
-elks-ansi|ELKS ANSI console,
- clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
- rmso=\E[m, smso=\E[7m, use=elks-glasstty,
+#### XTERM Mouse
+# The xterm mouse protocol is used by other terminal emulators.
+# In this section, two extended capabilities are used to illustrate the mouse
+# protocol: XM and xm. The "XM" capability is recognized by ncurses to allow
+# enabling/disabling other mouse protocols. The "xm" capability describes the
+# mouse response; currently there is no interpreter which would use this
+# information to make the mouse support completely data-driven.
+
+# Here is the "original" xterm mouse protocol.
+#
+# First seen in X10.3, February 1986, this likely dates from 1985 based on the
+# copyright dates in the sources. A comment in charproc.c notes "MIT bogus
+# sequence", referring to the fact that it does not correspond to a "real"
+# terminal. The mouse responses for the X10 protocol are sent only for
+# button-presses.
+xterm+x10mouse|X10 xterm mouse protocol,
+ kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
+ xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
+xterm-x10mouse|X10 xterm mouse,
+ use=xterm+x10mouse, use=xterm,
+
+# Here is the conventional xterm mouse protocol, introduced with X11R1 in
+# September 1987.
+#
+# The mouse responses for the X11 protocol covered button releases, as well as
+# modifiers:
+# shift 4
+# alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
+# control 16
+#
+# The modifiers are not reflected in this description because as used in xterm
+# they are normally inaccessible because the translations resources assign
+# shift and control to other features. However, they are important because
+# they take up space in the first byte of the response. The other bits of this
+# byte are used to encode the button number for both presses and releases.
+# In the X11 protocol, any button-release is encoded with "3" (the lowest 2
+# bits in the byte). Later work on XFree86 xterm used the remaining 3 bits to
+# provide additional features, e.g., wheel mouse.
+#
+# X11R1's xterm also supported an "emacs" mouse protocol, with final character
+# "t" or "T", which was activated by double-clicking. The "t" response was
+# used when the starting/ending positions were the same.
+#
+# X11R3 (February 1988) added the highlight/tracking mode.
+#
+# X11R4 (December 1989) added the control sequences document, listing the
+# control sequences for the X10/X11 protocols without descriptions. It also
+# mentioned the "emacs" ("T") response. Comments in button.c referred to the
+# X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal.
+#
+# X11R5 (November 1993) gave a description of the mouse protocol.
+#
+# X11R6 (January 1995) moved the control sequences document out of the xterm
+# source-directory to xc/doc/specs/xterm, polishing the formatting but adding
+# no new information.
+xterm+x11mouse|X11 xterm mouse protocol,
+ kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
+ xm=\E[M%?%p4%t%p3%e%{3}%;%'\s'%+%c%p2%'!'%+%c%p1%'!'%+%c,
+xterm-x11mouse|X11 mouse,
+ use=xterm+x11mouse, use=xterm,
+
+# Here is a suggested description of the xterm highlighting protocol.
+# A more complicated example could be constructed to account for the "t"
+# response.
+xterm+x11hilite|X11 xterm mouse protocol with highlight,
+ kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
+ xm=\E[%p6%'!'%+%p5%'!'%+%c%p8%'!'%+%c%p7%'!'%+%c%p2%'!'%+%c
+ %p1%'!'%+%cT,
+xterm-x11hilite|X11 mouse with highlight,
+ use=xterm+x11mouse, use=xterm,
+
+# The preceding were the sources from X Consortium. Other sources (or patches)
+# were available. Starting in mid-1995, XFree86 developers collected some of
+# those changes and began improvements, e.g., to support color. This was, by
+# the way, around the same time that rxvt developers began implementing color,
+# though dates (and attributions) are not well documented. I became interested
+# in xterm in late 1995, and involved in early 1996. To complete the picture,
+# CDE's dtterm was introduced around the same time, with no mouse protocol -TD
+
+# xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
+# "any-event" mouse mode.
+xterm+sm+1002|xterm any-event mouse,
+ kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
+xterm-1002|xterm any-event mouse,
+ use=xterm+sm+1002, use=xterm,
+
+xterm+sm+1003|testing xterm-mouse,
+ kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
-# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
-# instead of VT52, but the "elks" entry still refers to the latter.
+xterm-1003|testing xterm-mouse,
+ use=xterm+sm+1003, use=xterm,
+
+# xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
+# locator mode.
+
+# xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
+# dropping support for the X11 mouse protocol's shift-modifier and using
+# available bits in the first byte of the response to encode buttons 4 and 5.
+# xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
+# older configurations which might have used the obsolete modifiers.
+
+# xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
+# where the coordinates in the mouse response would be encoded in UTF-8,
+# thereby extending the range of coordinates past 222=(255-33). This is the
+# "1005" mouse mode.
+xterm+sm+1005|xterm UTF-8 mouse,
+ kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
+ xm=\E[M%?%p4%t3%e%p3%'\s'%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
+xterm-1005|xterm UTF-8 mouse,
+ use=xterm+sm+1005, use=xterm,
+
+# xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
+# SGR-style parameters.
+#
+# Someone stated that the 1005 mouse mode would not be handled properly in luit.
+# (By the way, this is a problem with the X11 protocol). A more plausible
+# criticism is that the responses provided by the 1005 mode are not distinct
+# from the non-1005 responses.
+#
+# As an alternative (and fixing the longstanding limitation of X11 mouse
+# protocol regarding button-releases), I provided the 1006 mode, referring
+# to it as "SGR 1006" since the replies resemble the SGR control string:
+xterm+sm+1006|xterm SGR-mouse,
+ kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
+ xm=\E[<%i%p3%d;%p1%d;%p2%d;%?%p4%tM%em%;,
+xterm-1006|xterm SGR-mouse,
+ use=xterm+sm+1006, use=xterm,
-elks|default ELKS console,
- use=elks-vt52,
+#### KTERM
+# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
+# (kterm should not invoke DEC Graphics as the alternate character set
+# -- Kenji Rikitake)
+# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
+# -- MATSUMOTO Shoji)
+# kterm implements acsc via built-in table of X Drawable's
+kterm|kterm kanji terminal emulator (X window system),
+ eslok, hs, XT,
+ ncv@,
+ acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
+ csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
+ kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
+ \E(B%;,
+ sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
+ tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
+kterm-color|kterm-co|kterm with ANSI colors,
+ ncv@, use=kterm, use=ecma+color,
-# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
-# one but in screen size
+#### Other XTERM
-sibo|ELKS SIBO console,
- cols#61, it#8, lines#20, use=elks-vt52,
+# These (xtermc and xtermm) are distributed with Solaris. They refer to a
+# variant of xterm which is apparently no longer supported, but are interesting
+# because they illustrate SVr4 curses mouse controls - T.Dickey
+xtermm|xterm terminal emulator (monochrome),
+ OTbs, am, km, mir, msgr, xenl,
+ btns#3, cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
+ home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
+ kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
+ kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
+ knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
+ rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
+ smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
-######## COMMERCIAL WORKSTATION CONSOLES
-#
+xtermc|xterm terminal emulator (color),
+ colors#8, ncv#7, pairs#64,
+ op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ use=xtermm,
-#### Alpha consoles
-#
+# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
+# Here's a termcap entry I've been using for xterm_color, which comes
+# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
+# color stuff, I also have a status line defined as the window manager
+# title bar. [I have translated it to terminfo -- ESR]
+xterm-pcolor|xterm with color used for highlights and status line,
+ wsl#40,
+ bold=\E[1;43m, rev=\E[7;34m,
+ sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1
+ %t;7;31%;%?%p3%t;7;34%;m,
+ smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
-# This is from the OSF/1 Release 1.0 termcap file
-pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
- am, xon,
- cols#80, lines#25,
- bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
- el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
- nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
+# This describes the capabilities of color_xterm, an xterm variant from
+# before ECMA-64 color support was folded into the main-line xterm release.
+# This entry is straight from color_xterm's maintainer.
+# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
+# The README's with the distribution also say that it supports SGR 21, 24, 25
+# and 27, but they are not present in the terminfo or termcap.
+color_xterm|cx|cx100|color_xterm color terminal emulator for X,
+ OTbs, am, km, mir, msgr, xenl, XT,
+ cols#80, it#8, lines#65, ncv@,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
+ kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
+ kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m,
+ rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;,
+ sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
+ smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, use=ecma+color, use=vt220+keypad,
-#### Sun consoles
+# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
+# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
+# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
+# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
+# that each of those implements the home, end, delete keys differently.
#
+# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
+# colors; note that this is not compatible with the 5.2 version.
+# csw (2002-05-15): make xterm-color primary instead of nxterm, to
+# match XFree86's xterm.terminfo usage and prevent circular links
+xterm-color|nxterm|generic color xterm,
+ ncv@,
+ op=\E[m, use=xterm-r6, use=klone+color,
-# :is1: resets scrolling region in case a previous user had used "tset vt100"
-oldsun|Sun Microsystems Workstation console,
- OTbs, am, km, mir, msgr,
- cols#80, it#8, lines#34,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
- dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
- ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
- is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
- rmso=\E[m, sgr0=\E[m, smso=\E[7m,
-# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
-# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
-# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
-sun-il|Sun Microsystems console with working insert-line,
- am, km, msgr,
- cols#80, lines#34,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
- dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
- ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
- kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
- kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
- kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
- kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
- kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
- kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
- rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
- smso=\E[7m, u8=\E[1t, u9=\E[11t,
-# On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
-# flake out on the last line. Unfortunately, without them the terminal has no
-# way to scroll.
-sun-cgsix|sun-ss5|Sun SparcStation 5 console,
- il@, il1@, use=sun-il,
-# If you are using an SS5, change the sun definition to use sun-ss5.
-sun|sun1|sun2|Sun Microsystems Inc. workstation console,
- use=sun-il,
-
-sun+sl|Sun Workstation window status line,
- hs,
- dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
+# This entry describes an xterm with Sun-style function keys enabled
+# via the X resource setting "xterm*sunFunctionKeys:true"
+# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
+# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
+# because we want it to be seen as <kcpy>.
+# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
+# with their Sun keyboard labels instead.
+# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
+xterm-sun|xterm with sunFunctionKeys true,
+ kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
+ kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
+ kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
+ kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
+ kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
+ kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
+ kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
+ kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
+ kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
+ kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
+ kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
+ use=xterm-basic,
+xterms-sun|small (80x24) xterm with sunFunctionKeys true,
+ cols#80, lines#24, use=xterm-sun,
-# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
-sun-s|Sun Microsystems Workstation window with status line,
- hs,
- dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
-sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
- hs,
- dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
-sun-48|Sun 48-line window,
- cols#80, lines#48, use=sun,
-sun-34|Sun 34-line window,
- cols#80, lines#34, use=sun,
-sun-24|Sun 24-line window,
- cols#80, lines#24, use=sun,
-sun-17|Sun 17-line window,
- cols#80, lines#17, use=sun,
-sun-12|Sun 12-line window,
- cols#80, lines#12, use=sun,
-sun-1|Sun 1-line window for sysline,
- eslok, hs,
- cols#80, lines#1,
- dsl=^L, fsl=\E[K, tsl=^M, use=sun,
-sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
- ich1@, rmir@, smir@, use=sun,
-sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
- lines#35,
- rmcup=\E[>4h, smcup=\E[>4l, use=sun,
-sun-type4|Sun Workstation console with type 4 keyboard,
- kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
- kcuu1=\E[215z, use=sun-il,
+#### GNOME (VTE)
+# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
+gnome-rh62|Gnome terminal,
+ bce,
+ kdch1=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ use=xterm-color,
-# Most of the current references to sun-color are from users wondering why this
-# is the default on install. Details from reading the wscons manpage, adding
-# cub, etc., here (rather than in the base sun-il entry) since it is not clear
-# when those were added -TD (2005-05-28)
+# GNOME Terminal 1.4.0.4 (Redhat 7.2)
#
-# According to wscons manpage, color is supported only on IA systems.
-# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
-# does not list these. It also sets ncv#3, however that corresponds to
-# underline and standout.
+# This implements a subset of vt102 with a random selection of features from
+# other terminals such as color and function-keys.
#
-# Since the documentation and terminfo do not agree, see also current code at
-# http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
+# shift-f1 to shift-f10 are f11 to f20
#
-# That (actually a different driver which "supports" sun-color) also supports
-# these features:
-# vpa=\E[%i%p1%dd
-# hpa=\E[%i%p1%d`
-# cbt=\E[Z
-# dim=\E[2m
-# blink=\E[5m
-# It supports bold, but not underline -TD (2009-09-19)
-sun-color|Sun Microsystems Workstation console with color support (IA systems),
- colors#8, ncv#3, pairs#64,
- cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
- cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
- sgr=\E[0%?%p1;1%;%?%p3%;7%;m, sgr0=\E[m, smso=\E[1m,
- use=sun,
-
-#### Iris consoles
+# NumLock changes the application keypad to approximate vt100 keypad, except
+# that there is no escape sequence matching comma (,).
#
+# Other defects observed:
+# vt100 LNM mode is not implemented.
+# vt100 80/132 column mode is not implemented.
+# vt100 DECALN is not implemented.
+# vt100 DECSCNM mode is not implemented, so flash does not work.
+# vt100 TBC (tab reset) is not implemented.
+# xterm alternate screen controls do not restore cursor position properly
+# it hangs in tack after running function-keys test.
+gnome-rh72|GNOME Terminal,
+ bce, km@,
+ kdch1=\E[3~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ rmam=\E[?7l,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e
+ \017%;,
+ sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=vt220+cvis,
+ use=xterm-color,
-# (wsiris: this had extension capabilities
-# :HS=\E7F2:HE=\E7F7:\
-# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
-# See the note on Iris extensions near the end of this file.
-# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
-# <flash> from BRL -- esr)
-wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
- OTbs, OTnc, OTpt, am,
- OTkn#3, cols#80, it#8, lines#40,
- OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
- cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
- cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
- flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
- ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
- kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
- rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
- smul=\E7R2\E9P,
-
-#### NeWS consoles
+# GNOME Terminal 2.0.1 (Redhat 8.0)
#
-# Console terminal windows under the NeWS (Sun's Display Postscript windowing
-# environment). Note: these have nothing to do with Sony's News workstation
-# line.
+# Documentation now claims it implements vt220 (which is demonstrably false).
+# However, it does implement ECH, which is a vt220 feature. And there are
+# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display
+# more of its bugs using vttest.
#
-
-# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
-# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
-psterm|psterm-basic|NeWS psterm-80x34,
- OTbs, am, hs, km, ul,
- cols#80, it#8, lines#34,
- blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
- cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
- dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
- home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
- ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
- sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
- tsl=\EOl,
-psterm-96x48|NeWS psterm 96x48,
- cols#96, lines#48, use=psterm,
-psterm-90x28|NeWS psterm 90x28,
- cols#90, lines#28, use=psterm,
-psterm-80x24|NeWS psterm 80x24,
- cols#80, lines#24, use=psterm,
-# This is a faster termcap for psterm. Warning: if you use this termcap,
-# some control characters you type will do strange things to the screen.
-# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
-psterm-fast|NeWS psterm fast version (flaky ctrl chars),
- OTbs, am, hs, km, ul,
- cols#80, it#8, lines#34,
- blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
- cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
- dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
- il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
- rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
- smso=^Oo, smul=^Ou, tsl=^Ol,
-
-#### NeXT consoles
+# However, note that bce and msgr are broken in this release. Tabs (tbc and
+# hts) are broken as well. Sometimes flash (as in xterm-new) works.
#
-# Use `glasstty' for the Workspace application
+# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu
+# operations. Shift-tab generates a distinct sequence so it can be argued
+# that it implements kcbt.
+gnome-rh80|GNOME Terminal,
+ bce@, msgr@,
+ ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=^?,
+ kcbt=\E^I, op=\E[39;49m, use=gnome-rh72,
+
+# GNOME Terminal 2.2.1 (Redhat 9.0)
#
+# bce and msgr are repaired.
+gnome-rh90|GNOME Terminal,
+ bce, msgr, XT,
+ hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
+ kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
+ use=gnome-rh80,
-# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
-next|NeXT console,
- am, xt,
- cols#80, it#8, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
- ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
- rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
-nextshell|NeXT Shell application,
- am,
- cols#80,
- bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
- kcud1=^J, nel=^M^J,
+# GNOME Terminal 2.14.2 (Fedora Core 5)
+# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002.
+gnome-fc5|GNOME Terminal,
+ rs1=\Ec,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l
+ \E[?25h,
+ use=ansi+enq, use=xterm+pcc0, use=gnome-rh90,
-#### Sony NEWS workstations
+# GNOME Terminal 2.18.1 (2007 snapshot)
#
+# For any "recent" version of gnome-terminal, it is futile to attempt to
+# support modifiers on cursor- and keypad keys because the program usually
+# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset
+# of the keys (which more/less correspond to the termcap values), and will
+# interpret those according to the $TERM value, but others not in the
+# terminfo according to some constantly changing set of hacker guidelines -TD
+vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
+ use=xterm+pcc2, use=vt220+cvis, use=gnome-fc5,
+gnome-2007|GNOME Terminal snapshot 2.18.1,
+ use=vte-2007,
-# (news-unk: this had :KB=news: -- esr)
-news-unk|SONY NEWS vt100 emulator common entry,
- OTbs, OTpt, am, xenl,
- cols#80,
- OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
- cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
- ed=\E[J, el=\E[K, home=\E[H, ht=^I,
- if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
- is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
- kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
- kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
- rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
- sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+# GNOME Terminal 2.22.3 (2008 snapshot)
#
-# (news-29: this had :TY=ascii: --esr)
-news-29,
- lines#29, use=news-unk,
-# (news-29-euc: this had :TY=euc: --esr)
-news-29-euc,
- use=news-29,
-# (news-29-sjis: this had :TY=sjis: --esr)
-news-29-sjis,
- use=news-29,
+# In vttest, it claims to be a vt220 with national replacement character-sets,
+# but aside from the identifier string, implements only a small fraction of
+# vt220's behavior, which will make it less usable on a VMS system (unclear
+# what the intent of the developer is, since the NRC feature exposed in vttest
+# by this change does not work).
+vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
+ use=vte+pcfkeys, use=vte-2007,
+gnome-2008|GNOME Terminal snapshot 2.22.3,
+ use=vte-2008,
+
+# GNOME Terminal 3.6.0 (2012)
+# VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
+# in ncurses). It inherited from gnome-fc5, which broke the modified forms
+# of f1-f4 -TD
+#
+# Testing with tack shows that flash does not/has not worked -TD
+vte-2012|VTE 0.34.1,
+ ncv#16,
+ dim=\E[2m, flash@, invis=\E[8m, rmso=\E[27m, rmul=\E[24m,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3
+ %|%t;7%;m%?%p9%t\016%e\017%;,
+ use=ecma+italics, use=vte-2008,
+# Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
+# 61 differences from a correct entry for gnome terminal.
+gnome-2012|GNOME Terminal 3.6.0,
+ use=vte-2012,
+
+# Before 2008, GNOME terminal could automatically use the contents of the
+# "xterm" terminfo to supply key information which is not built into the
+# program. With 2.22.3, this list was built into the program (which addressed
+# the inadvertent use of random terminfo data, though using a set of values
+# which did not correspond to any that xterm produced - still not solving the
+# problem that GNOME terminal hardcoded the $TERM variable as "xterm").
#
-# (news-33: this had :TY=ascii: --esr)
-news-33,
- lines#33, use=news-unk,
-# (news-33-euc: this had :TY=euc: --esr)
-news-33-euc,
- use=news-33,
-# (news-33-sjis: this had :TY=sjis: --esr)
-news-33-sjis,
- use=news-33,
+# terminfo modifier code keys
+# kf13-kf24 shift 2 F1 to F12
+# kf25-kf36 control 5 F1 to F12
+# kf37-kf48 shift/control 6 F1 to F12
+# kf49-kf60 alt 3 F1 to F12
+# kf61-kf63 shift-alt 4 F1 to F3
#
-# (news-42: this had :TY=ascii: --esr)
-news-42,
- lines#42, use=news-unk,
-# (news-42-euc: this had :TY=euc: --esr)
-news-42-euc,
- use=news-42,
-# (news-42-sjis: this had :TY=sjis: --esr)
-news-42-sjis,
- use=news-42,
+# The parameters with \EO (SS3) are technically an error, since SS3 should have
+# no parameters. This appears to be rote copying based on xterm+pcc0.
+vte+pcfkeys|VTE's variation on xterm+pcfkeys,
+ kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
+ kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
+ kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
+ kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S,
+ kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
+ kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
+ use=xterm+pcfkeys,
+gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
+ use=vte+pcfkeys,
+
+# deprecated - use "vte" for newer versions
+gnome|GNOME Terminal,
+ use=vte-2012,
+gnome-256color|GNOME Terminal with xterm 256-colors,
+ use=xterm+256color, use=gnome,
+
+# relevant changes were made in January 2014, and later.
+#
+# Originally VTE was promoted as a library able to emulate any terminal by
+# reading its terminal description. In practice, that never got beyond the
+# ability to read definitions of special keys (function-, editing-, cursor).
+#
+# Before 2014, VTE had a termcap reader (originally pointing to a private copy
+# of a termcap file derived from xterm). That was incomplete because it did
+# not have any of the modifier-key information used for xterm's function-,
+# editing-, and cursor-keys. Having its own reader was unnecessary since
+# ncurses provides that information; used since xterm patch #225 in 2007.
+#
+# During April/May 2014, a few bug reports (e.g., gnome #169295, gnome #728900,
+# gnome #730137) dealt with attempts to recast that termcap reader as library
+# calls, then attempting to adapt a chunk of code from ncurses (src/vteti.c),
+# abandoning that and finally constructing a table to match xterm's default
+# behavior, e.g., for "xterm+pcfkeys".
+vte-2014|VTE 0.35.1,
+ ncv@,
+ cbt=\E[Z, el1=\E[1K, flash=\E[?5h$<100/>\E[?5l,
+ ich=\E[%p1%d@, kent=\EOM, use=ecma+index,
+ use=xterm+sm+1006, use=xterm+pcfkeys, use=vte-2012,
+
+# As of January 2018, this was the most recent release,
+# e.g., with gnome-terminal 3.26.2
+vte-2017|VTE 0.50.2,
+ use=ecma+strikeout, use=vte-2014,
+
+# VTE 0.51.2 and gnome-terminal 3.28.2 copied a feature from KovId's TTY
+# late in 2017 for changing the appearance of underlines, which was
+# incorporated into Debian and Fedora testing-packages in February and March
+# 2018, respectively. Overline (Smol/Rmol) has been supported since December
+# 2017.
+vte-2018|VTE 0.51.2,
+ Rmol=\E[55m, Smol=\E[53m, Smulx=\E[4\:%p1%dm,
+ use=vte-2017,
+
+vte|VTE aka GNOME Terminal,
+ use=vte-2018,
+
+vte-256color|VTE with xterm 256-colors,
+ use=xterm+256color, use=vte,
+
+# XFCE Terminal 0.2.5.4beta2
#
-# NEWS-OS old termcap entry
+# This is based on some of the same source code, e.g., the VTE library, as
+# gnome-terminal, but has fewer features, fails more screens in vttest.
+# Since most of the terminfo-related behavior is due to the VTE library,
+# the terminfo is the same as gnome-terminal.
+xfce|Xfce Terminal,
+ use=vte-2008,
+
+# TERMITE
+#
+# https://github.com/thestinger/termite
+#
+# A review requires install of Arch Linux since Fedora and Debian don't have
+# this program. It uses "vte3-ng" (a conflicting package), which is here:
+# https://github.com/thestinger/vte-ng
+# which (based on the default branch setting) seems to be a fork of vte
+# 0.48.2, and is noted as such in Arch:
+# https://aur.archlinux.org/packages/vte3-ng/
+# It won't be merged:
+# https://bugzilla.gnome.org/show_bug.cgi?id=679658#c10
+# https://bugzilla.gnome.org/show_bug.cgi?id=78291
+# but perhaps made obsolete.
+#
+# The entry as given was mislabeled "xterm-termite" (it is not xterm), and
+# was mostly cut/paste from xterm-256color, but since VTE does not actually
+# implement several of the features in that terminal description, this one is
+# trimmed to eliminate those. Also, since it is a slightly older version of
+# VTE, it lacks a few more features (again, trimmed).
+termite|VTE-based terminal,
+ am, ccc, km, mir, msgr, npc, xenl,
+ cols#80, it#8, lines#24, ncv@,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz{{||}}~~,
+ bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ind=\n, invis=\E[8m,
+ is2=\E[!p\E[?3;4l\E[4l\E>, kb2=\EOE, kbs=^?, kcbt=\E[Z,
+ kent=\EOM, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
+ rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+ %t;7%;%?%p7%t;8%;m,
+ sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
+ use=xterm+alt1049, use=ecma+index, use=ansi+idc,
+ use=ansi+idl, use=ansi+enq, use=ecma+italics,
+ use=xterm+256color, use=ecma+color, use=vt220+cvis,
+ use=xterm+pcfkeys, use=xterm+sl-twm,
+
+#### Other GNOME
+# Multi-Gnome-Terminal 1.6.2
#
-# (news-old-unk: this had :KB=news:TY=sjis: --esr)
-news-old-unk|SONY NEWS vt100 emulator common entry,
- OTbs, OTpt, am, xenl,
- cols#80, vt#3,
- OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
- cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
- home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
- kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
- rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+# This does not use VTE, and does have different behavior (compare xfce and
+# gnome).
+mgt|Multi GNOME Terminal,
+ use=ecma+index, use=xterm-xf86-v333,
+
+#### KDE
+# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
+# or not is debatable).
+kvt|KDE terminal,
+ bce, km@,
+ kdch1=^?, kend=\E[F, khome=\E[H, use=xterm-color,
+
+# Konsole 1.0.1 (2001/11/25)
+# (formerly known as kvt)
#
-# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
-nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
- OTbs,
- lines#40,
- is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
- use=news-old-unk,
+# This program hardcodes $TERM to 'xterm', which is not accurate. However, to
+# simplify this entry (and point out why konsole isn't xterm), we base this on
+# xterm-r6. The default keyboard appears to be 'linux'.
#
-# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
-nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
- lines#42,
- is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
- use=news-old-unk,
+# Notes:
+# a) konsole implements several features from XFree86 xterm, though none of
+# that is documented - except of course in its source code - apparently
+# because its implementors are unaccustomed to reading documentation - as
+# evidenced by the sparse and poorly edited documentation distributed with
+# konsole. Some features such as the 1049 private mode are recognized but
+# incorrectly implemented as a duplicate of the 47 private mode.
+# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad
+# sends PC-style escapes rather than vt100.
+# c) fails vttest menu 3 (Test of character sets) because it does not properly
+# parse some control sequences. Also fails vttest Primary Device Attributes
+# by sending a bogus code (in the source it says it's supposed to be a
+# vt220, which is doubly incorrect because it does not implement vt220
+# control sequences except for a few special cases). Treat it as a
+# mildly-broken vt102.
#
-# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
-nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
- OTbs,
- lines#40,
- is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
- use=news-old-unk,
+# Update for konsole 1.3.2:
+# The 1049 private mode works (but see the other xterm screens in vttest).
+# Primary Device Attributes now returns the code for a vt100 with advanced
+# video option. Perhaps that's intended to be a "mildly-broken vt102".
#
-# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
-nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
- OTbs,
- lines#31,
- is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
- use=news-old-unk,
+# Updated for konsole 1.6.4:
+# add konsole-solaris
#
-# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
-# also the alias vt100-bm.
-nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
- OTbs,
- lines#33,
- is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
- use=news-old-unk,
+# Updated for konsole 1.6.6:
+# add control-key modifiers for function-keys, etc.
#
-# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
-nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
- OTbs,
- lines#31,
- is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
- use=news-old-unk,
+# Updated for konsole 2.3 (October 2008):
+# vttest menu 1 shows that both konsole and gnome terminal do wrapping
+# different from xterm (and vt100's). They have the same behavior in
+# this detail, but it is unclear which copies the other.
#
-# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
-news28|sony vt100 emulator 28 lines,
- OTbs,
- lines#28,
- is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
- use=news-old-unk,
+# Deferred update for konsole 2.10 (late 2012):
+# add SGR 1006 mouse
#
-# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
-news29|news28-a|sony vt100 emulator 29 lines,
- lines#29,
- is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
- use=news-old-unk,
+# Updated for konsole 2.12.4 (late 2013):
+# add sitm/ritm
#
-# (news511: this had :TY=sjis: --esr)
-nwp511|nwp-511|nwp-511 vt100,
- OTbs, OTpt, am, xenl,
- cols#80, lines#24,
- clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
- ed=\E[J$<30/>, el=\E[K$<3/>,
- flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
- il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
- kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
- ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
- rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
- smso=\E[7m$<2/>, smul=\E[4m$<2/>,
-# (news517: this had :TY=sjis:. --esr)
-nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
- eslok, hs,
- cols#80, lines#30,
- OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
- is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
- tsl=\E[1$}\E[;%df, use=vt200,
-# (news517-w: this had :TY=sjis:. --esr)
-nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
- eslok, hs,
- cols#132, lines#50,
- OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
- is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
- rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
- tsl=\E[1$}\E[;%df, use=vt200,
-
-#### Common Desktop Environment
+# Updated for konsole 16.07 (mid 2016):
+# add dim, invis, strikeout
+# (also overline, which is too rarely used to provide as an extension)
+#
+# Updated for konsole 17.12.0 (late 2017):
#
+# Re-enable "bel", since it is latent in the source-code even though KDE config
+# often hides the feature (2020/5/30)
+konsole-base|KDE console window,
+ bce, km@, npc, XT,
+ ncv@,
+ blink=\E[5m, dim=\E[2m, ech=\E[%p1%dX,
+ flash=\E[?5h$<100/>\E[?5l, hpa=\E[%i%p1%dG,
+ invis=\E[8m, kbs=^?, kdch1=\E[3~, kend=\E[4~, kf1@, kf10@,
+ kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2@,
+ kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, kfnd@, khome=\E[1~,
+ kslt@, rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
+ use=ecma+index, use=xterm+sm+1006, use=ecma+strikeout,
+ use=ecma+italics, use=ecma+color, use=xterm-r6,
+ use=vt220+cvis,
+
+# The keytab feature was introduced in 0.9.12 (February 2000) with "linux" and
+# "vt100" key-table files along with a compiled-in default key-table.
+#
+# The main difference between the two keytabs was that the developer equated
+# "vt100" with xterm, and noticed that the Linux console's F1-F5 differed from
+# that. For the same reason, the home/end keys differ. A VT100 had none of
+# that. The otherwise identical keytabs have definitions to model the VT52
+# cursor-keys and the VT100 cursor-keys with application versus normal modes.
+#
+# An "x11r5" keytab (displayed in the menu as "X11 R5") was added in January
+# 2001, and shortly after retitled to "XFree 3.x.x". Both it and "vt100" were
+# dropped from the install in June 2008.
+#
+# The default keytab added in January 2000 was originally titled "X11 R6",
+# and likewise retitled to "XFree 4".
+#
+# A "solaris" keytab was added in Febrary 2005, copying the "vt100" keytab
+# and changing backspace to ^H, removing that keytab's attempt to model the
+# VT100 keypad and VT52 (KDE #20459).
+#
+# The developers made changes to the default and linux keytabs. Comparing
+# the original and 2018 versions using diffstat:
+# default: 119 added, 147 deleted, 28 unchanged
+# linux: 47 added, 28 deleted, 104 unchanged
+#
+# Most of the change for the default keytab was to make konsole act more like
+# xterm. That was a feature named AnyMod which came in May 2005 for KDE #92749
+# (see also Redhat #122815). Later, in June 2007 the compiled-in keytab was
+# made an external file (like "linux" and "solaris"), and some further
+# refinement made. But there are still flaws in the scheme.
+#
+# Essentially AnyMod maps the xterm "PC-style" modifier codes such as 2 for
+# Shift into a placeholder in the table entries. That works well if all of the
+# modified keys are modified in the same way. But xterm does not do that. The
+# first 4 function keys are used in xterm to support the VT100 PF1-PF4 keypad
+# keys. For example, F2 sends \EOQ in both terminals because of this feature.
+# But a shifted F2 (F14=F2+12) differs like this, in infocmp's listing:
+# kf14: '\E[1;2Q', '\EO2Q'.
+#
+# In effect, a quarter of konsole's function-keys are different from xterm.
+#
+# It is not a simple blunder:
+# a) xterm patch #121 (November 1999), providing the first version of the
+# PC-style modifiers would send \EO2Q
+# b) xterm patch #216 (July 2006) amended this and other details, provided
+# better documentation for the modifiers and made the behavior configurable,
+# e.g., using the modifyFunctionKeys resource. The reason why it sends
+# \E[1;2Q is that \E[O2Q is not a legal ECMA-48 control sequence. The
+# changelog points this out as "avoid sending SS3 with parameters".
+# c) That came after AnyMod was introduced, but still early enough that one
+# might expect konsole's developers to followup. Twelve years later that
+# has yet to happen.
+#
+# As of 2018, konsole still provides 3 keyboard profiles ("XFree 4", "linux",
+# "solaris").
+konsole-linux|KDE console window with linux keyboard,
+ kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
+ kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
+ kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, use=konsole-base,
+konsole-solaris|KDE console window with Solaris keyboard,
+ kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
-# This ships with Sun's CDE in Solaris 2.5
-# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
-dtterm|CDE desktop terminal,
- am, mir, msgr, xenl, xon,
- cols#80, it#8, lines#24, lm#0, ncv@,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
- dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
- ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
- ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
- kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
- kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
- kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
+# Obsolete: x11r5.keymap
+# KDE's "XFree86 3.x.x" keyboard was obviously based on reading the xterm
+# terminfo at the time rather than testing the code.
+konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm,
+ kend=\E[4~, khome=\E[1~, use=konsole-vt100,
+
+# The value for kbs (see konsole-vt100) reflects local customization rather
+# than the settings used for XFree86 xterm.
+konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm,
+ kend=\EOF, khome=\EOH, use=konsole+pcfkeys,
+ use=konsole-vt100,
+
+konsole+pcfkeys|konsole subset of xterm+pcfkeys,
+ kcbt=\E[Z, use=xterm+pcc2, use=xterm+pcf0,
+ use=xterm+pce2,
+
+# Obsolete: vt100.keymap
+# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but
+# it is still useful for deriving the other entries, since the developer
+# provided function-keys based on xterm.
+konsole-vt100|KDE console window with vt100 (sic) keyboard,
+ kbs=^?, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@,
+ kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
- kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
- rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
- sc=\E7,
- sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
+ khome=\E[H, use=konsole-base,
-#### Non-Unix Consoles
-#
+# Obsolete: vt420pc.keytab was added in June 2000, dropped from the install in
+# September 2008 and removed in June 2016. The developer who removed it stated
+# that it was never installed.
+konsole-vt420pc|KDE console window with vt420 pc keyboard,
+ kbs=^H, kdch1=^?, use=konsole-vt100,
-#### EMX termcap.dat compatibility modes
-#
-# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
-# no_color_video to inform the application that standout(1), underline(2)
-# reverse(4) and invisible(64) don't work with color.
-emx-base|DOS special keys,
- bce, bw,
- it#8, ncv#71,
- bel=^G, use=ansi.sys,
+# make a default entry for konsole
+konsole|KDE console window,
+ use=konsole-xf4x,
-# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
-# a Unix-style environment used on OS/2. (Note that the suffix makes some
-# names longer than 14 characters, the nominal maximum).
+# These were written for ncurses:
+konsole-16color|klone of xterm-16color,
+ ncv#32, use=ibm+16color, use=konsole,
+konsole-256color|KDE console window with xterm 256-colors,
+ use=xterm+256setaf, use=konsole,
+
+#### MLTERM
+# https://github.com/arakiken/mlterm
+
+mlterm|multi lingual terminal emulator,
+ use=mlterm3,
+
+# Tested mlterm 3.9.0 (2020/09/19):
+# ncurses:
+# - has blinking text
+# - has italics
+# - has invisible-text
+# tack:
+# - has crossed-out text
+# - does not support palette reset with OSC 104
+# - testing the function-keys is difficult because the terminal is
+# preconfigured to set many of the modified keys to special functions, e.g.,
+# - shift-F1 and shift-F2 are bound to a split-screen feature
+# - control-F1 and control-F2 is bound to a new-terminal feature
+# vttest:
+# - primary response says it is a VT340 (ReGIS and Sixel).
+# - has partial support for double-size characters.
+# - character-set tests do not work.
+# - DEC locator works.
+# - 1006-mouse works.
+# - focus-events do not work reliably.
+# - numeric keypad escapes do not work.
+# - back-color erase works
+# other:
+# - title-stack works.
+# - doesn't respond to 8-bit controls.
+# - 256-color palette initializing works.
+# - DECSTR soft-reset is documented.
+#
+# Tested mlterm 3.3.8 (2018/01/21):
+# found xterm+sm+1006 did not work with version 3.3.8
+# soft-reset DECSTR is in sources since 2017/09/19.
+#
+# Tested mlterm 3.2.2 (2014/03/22):
+# mlterm 3.x made further changes, but they were not reflected in the included
+# mlterm.ti (which was dropped in 2015). This entry has been based on testing
+# with ncurses, tack and vttest -TD
+mlterm3|multi lingual terminal emulator,
+ bce, AX,
+ blink=\E[5m, flash=\E[?5h$<100/>\E[?5l, invis=\E[8m,
+ is2=\E[!p\E[?3;4l\E>, rs2=\E[!p\E[?3;4l\E>,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;%?
+ %p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+ use=ansi+enq, use=ansi+rep, use=ecma+italics,
+ use=ecma+strikeout, use=xterm+app, use=xterm+pcf2,
+ use=xterm+pcc2, use=xterm+pce2, use=xterm+meta,
+ use=xterm+alt+title, use=xterm+sm+1006,
+ use=vt100+pfkeys, use=mlterm2,
+
+# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
#
-# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
-ansi-emx|ANSI.SYS color,
- am, bce, eo, mir, msgr, xon,
- colors#8, cols#80, it#8, lines#25, pairs#64,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
- cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
- dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
- home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
- kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
- rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
- rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m,
- smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
- u9=\E[c, use=emx-base,
-# nice colors for Emacs (white on blue, mode line white on cyan)
-ansi-color-2-emx|ANSI.SYS color 2,
- clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
- rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
- setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
- smul=\E[1;36;44m, use=ansi-emx,
-# nice colors for Emacs (white on black, mode line black on cyan)
-ansi-color-3-emx|ANSI.SYS color 3,
- clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
- rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
- setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
- smul=\E[0;36;40m, use=ansi-emx,
-mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
- am,
- cols#80, it#8, lines#24,
- clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
- ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
- kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
- kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
- kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
- sgr0=\E[0m,
-
-# Use this for cygwin32 (tested with beta 19.1)
-# underline is colored bright magenta
-# shifted kf1-kf12 are kf11-kf22
-cygwinB19|ansi emulation for cygwin32,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
- kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
- kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
- kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
- use=ansi.sys,
-
-# Use this for cygwin (tested with version 1.1.0).
-# I've combined pcansi and linux. Some values of course were different and
-# I've indicated which of these were and which I used.
-# Cheers, earnie_boyd@yahoo.com
-# several changes based on running with tack and comparing with older entry -TD
-# more changes from csw:
-# add cbt [backtab]
-# remove eo [erase overstrike with blank]
-# change clear was \E[H\E[J now \E[2J (faster?)
-# remove cols
-# remove lines
-# remove ncv#3 [colors collide with highlights, bitmask] not applicable
-# to MSDOS box?
-# add cub [cursor back param]
-# add cuf [cursor forward param]
-# add cuu [cursor up param]
-# add cud [cursor down param]
-# add hs [has status line]
-# add fsl [return from status line]
-# add tsl [go to status line]
-# add smacs [Start alt charset] (not sure if this works)
-# add rmacs [End alt charset] (ditto)
-# add smcup [enter_ca_mode] (save console; thanks Corinna)
-# add rmcup [exit_ca_mode] (restore console; thanks Corinna)
-# add kb2 [center of keypad]
-# add u8 [user string 8] \E[?6c
-# add el [clear to end of line] \E[K
-# Notes:
-# cnorm [make cursor normal] not implemented
-# flash [flash] not implemented
-# blink [blink] not implemented very usefully in cygwin? \E[5m
-# dim [dim] not implemented very usefully in cygwin? \E[2m
-# cub1 [cursor back 1] typically \E[D, but ^H is faster?
-# kNXT [shifted next key] not implemented
-# kPRV [shifted prev key] not implemented
-# khome [home key] really is \E[1~ NOT \E[H
-# tbc [clear tab stops] not implemented
-# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
-# smpch [Start PC charset] is \E[11m, same as smacs
-# rmpch [End PC charset] is \E[10m, same as rmacs
-# mir [move in insert mode] fails in tack?
-# bce [back color erase] causes problems with change background color?
-# cvvis [make cursor very visible] causes a stackdump when testing with
-# testcurs using the output option? \E[?25h\E[?8c
-# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
-# ech [erase characters param] broken \E[%p1%dX
-# kcbt [back-tab key] not implemented in cygwin? \E[Z
+# It is nominally a vt102 emulator, with features borrowed from rxvt and
+# xterm.
#
-# 2005/11/12 -TD
-# Remove cbt since it does not work in current cygwin
-# Add 'mir' and 'in' flags based on tack
-cygwin|ansi emulation for Cygwin,
- am, hs, mir, msgr, xon,
- colors#8, it#8, pairs#64,
- acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
- cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
- cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
- hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G,
- kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
- kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
- kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
- kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
- nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
- rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
- rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
- sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
- sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
- smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
- vpa=\E[%i%p1%dd, use=vt102+enq,
-
-# I've supplied this so that you can help test new values and add other
-# features. Cheers, earnie_boyd@yahoo.com.
+# The function keys are numbered based on shift/control/alt modifiers, except
+# that the control-modifier itself is used to spawn a new copy of mlterm (the
+# "-P" option). So control/F1 to control/F12 may not be usable, depending on
+# how it is configured.
#
-# Some features are from pcansi. The op value is from linux. Function-keys
-# are from linux. These have been tested not to cause problems. xenl was in
-# this list, but DOES cause problems so it has been removed
-cygwinDBG|Debug Version for Cygwin,
- am, eo, mir, msgr, xon,
- colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
- acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
- cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+# kf1 to kf12 \E[11~ to \E[24~
+# shift kf1 to kf12 \E[11;2~ to \E[24;2~
+# alt kf1 to kf12 \E[11;3~ to \E[24;3~
+# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~
+# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe)
+# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~
+# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~
+# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~
+#
+mlterm2|multi lingual terminal emulator,
+ am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
- ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
- il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
- kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
- kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
- kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
- kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
- knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
- rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
- rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
- sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n,
+ is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^?,
+ kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, khome=\EOH,
+ kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, knp=\E[6~,
+ kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, nel=\EE,
+ op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m, rs1=\Ec,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l,
+ sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e
+ \E(B%;,
+ sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
+ vpa=\E[%i%p1%dd, use=xterm+alt1049, use=ecma+index,
+ use=mlterm+pcfkeys, use=vt220+cvis, use=xterm+r6f2,
-# Key definitions:
-# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
-# encodings used by other x86 environments. All others are invented for DJGPP.
-# Oddly enough, while several combinations of modifiers are tabulated, there is
-# none for shifted cursor keys.
+# The insert/delete/home/end keys do not respond to modifiers because mlterm
+# looks in its termcap to decide which string to send. If it used terminfo
+# (when available), it could use the extended names introduced for xterm.
+mlterm+pcfkeys|fragment for PC-style fkeys,
+ kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C,
+ kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B,
+ kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~,
+ kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D,
+ kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~,
+ kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~,
+ kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C,
+ kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
+ kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
+
+mlterm-256color|mlterm 3.0 with xterm 256-colors,
+ use=xterm+256color, use=mlterm,
+
+#### RXVT
+# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
+# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
+# Notes:
+# rxvt 2.21b uses
+# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
+# but some applications don't work with that.
+# It also has an AIX extension
+# box2=lqkxjmwuvtn,
+# and
+# ech=\E[%p1%dX,
+# but the latter does not work correctly.
#
-# F1 \E[[A
-# F2 \E[[B
-# F3 \E[[C
-# F4 \E[[D
-# F5 \E[[E
-# F6 \E[17~
-# F7 \E[18~
-# F8 \E[19~
-# F9 \E[20~
-# F10 \E[21~
-# F11 \E[23~
-# F12 \E[24~
+# The distributed terminfo says it implements hpa and vpa, but they are not
+# implemented correctly, using relative rather than absolute positioning.
#
-# Delete \E[3~
-# Down Arrow \E[B
-# End \E[4~
-# Home \E[1~
-# Insert \E[2~
-# Left Arrow \E[D
-# Page Down \E[6~
-# Page Up \E[5~
-# Right Arrow \E[C
-# Up Arrow \E[A
+# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
+# Since rxvt is not really compatible with xterm, it should be configured as
+# "rxvt" or "rxvt-color".
#
-# Shift-F1 \E[25~
-# Shift-F2 \E[26~
-# Shift-F3 \E[27~
-# Shift-F4 \E[28~
-# Shift-F5 \E[29~
-# Shift-F6 \E[30~
-# Shift-F7 \E[31~
-# Shift-F8 \E[32~
-# Shift-F9 \E[33~
-# Shift-F10 \E[34~
-# Shift-F11 \E[35~
-# Shift-F12 \E[36~
+# removed dch/dch1 because they are inconsistent with bce/ech -TD
+# remove km as per tack test -TD
+rxvt-basic|rxvt terminal base (X Window System),
+ OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
+ cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\n, is1=\E[?47l\E=\E[?1l,
+ is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
+ kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
+ rmul=\E[24m,
+ rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+ rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
+ 25h,
+ s0ds=\E(B, s1ds=\E(0, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
+ %p9%t\016%e\017%;,
+ sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
+ smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq,
+ use=rxvt+pcfkeys, use=vt220+cvis, use=vt220+keypad,
+# Key Codes from rxvt reference:
#
-# Ctrl-F1 \E[47~
-# Ctrl-F2 \E[48~
-# Ctrl-F3 \E[49~
-# Ctrl-F4 \E[50~
-# Ctrl-F5 \E[51~
-# Ctrl-F6 \E[52~
-# Ctrl-F7 \E[53~
-# Ctrl-F8 \E[54~
-# Ctrl-F9 \E[55~
-# Ctrl-F10 \E[56~
-# Ctrl-F11 \E[57~
-# Ctrl-F12 \E[58~
+# Note: Shift + F1-F10 generates F11-F20
#
-# Ctrl-Delete \E[43~
-# Ctrl-Down Arrow \E[38~
-# Ctrl-End \E[44~
-# Ctrl-Home \E[41~
-# Ctrl-Insert \E[42~
-# Ctrl-Left Arrow \E[39~
-# Ctrl-Page Down \E[46~
-# Ctrl-Page Up \E[45~
-# Ctrl-Right Arrow \E[40~
-# Ctrl-Up Arrow \E[37~
+# For the keypad, use Shift to temporarily override Application-Keypad
+# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock
+# is off, escape sequences toggle Application-Keypad setting.
+# Also note that values of Home, End, Delete may have been compiled
+# differently on your system.
#
-# Alt-F1 \E[59~
-# Alt-F2 \E[60~
-# Alt-F3 \E[61~
-# Alt-F4 \E[62~
-# Alt-F5 \E[63~
-# Alt-F6 \E[64~
-# Alt-F7 \E[65~
-# Alt-F8 \E[66~
-# Alt-F9 \E[67~
-# Alt-F10 \E[68~
-# Alt-F11 \E[79~
-# Alt-F12 \E[80~
+# Normal Shift Control Ctrl+Shift
+# Tab ^I ESC [ Z ^I ESC [ Z
+# BackSpace ^H ^? ^? ^?
+# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @
+# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @
+# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
+# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @
+# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @
+# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @
+# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @
+# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @
+# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @
+# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^
+# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^
+# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^
+# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^
+# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^
+# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^
+# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^
+# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^
+# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^
+# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^
+# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @
+# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @
+# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @
+# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @
+# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @
+# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @
+# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @
+# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @
+# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @
+# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @
#
-# Alt-Delete \E[65~
-# Alt-Down Arrow \E[60~
-# Alt-End \E[66~
-# Alt-Home \E[41~
-# Alt-Insert \E[64~
-# Alt-Left Arrow \E[61~
-# Alt-Page Down \E[68~
-# Alt-Page Up \E[67~
-# Alt-Right Arrow \E[62~
-# Alt-Up Arrow \E[59~
+# Application
+# Up ESC [ A ESC [ a ESC O a ESC O A
+# Down ESC [ B ESC [ b ESC O b ESC O B
+# Right ESC [ C ESC [ c ESC O c ESC O C
+# Left ESC [ D ESC [ d ESC O d ESC O D
+# KP_Enter ^M ESC O M
+# KP_F1 ESC O P ESC O P
+# KP_F2 ESC O Q ESC O Q
+# KP_F3 ESC O R ESC O R
+# KP_F4 ESC O S ESC O S
+# XK_KP_Multiply * ESC O j
+# XK_KP_Add + ESC O k
+# XK_KP_Separator , ESC O l
+# XK_KP_Subtract - ESC O m
+# XK_KP_Decimal . ESC O n
+# XK_KP_Divide / ESC O o
+# XK_KP_0 0 ESC O p
+# XK_KP_1 1 ESC O q
+# XK_KP_2 2 ESC O r
+# XK_KP_3 3 ESC O s
+# XK_KP_4 4 ESC O t
+# XK_KP_5 5 ESC O u
+# XK_KP_6 6 ESC O v
+# XK_KP_7 7 ESC O w
+# XK_KP_8 8 ESC O x
+# XK_KP_9 9 ESC O y
#
-# Also:
-# Alt-A \E[82~
-# Alt-B \E[82~
-# Alt-C \E[83~
-# Alt-D \E[84~
-# Alt-E \E[85~
-# Alt-F \E[86~
-# Alt-G \E[87~
-# Alt-H \E[88~
-# Alt-I \E[89~
-# Alt-J \E[90~
-# Alt-K \E[91~
-# Alt-L \E[92~
-# Alt-M \E[93~
-# Alt-N \E[94~
-# Alt-O \E[95~
-# Alt-P \E[96~
-# Alt-Q \E[97~
-# Alt-R \E[98~
-# Alt-S \E[99~
-# Alt-T \E[100~
-# Alt-U \E[101~
-# Alt-V \E[102~
-# Alt-W \E[103~
-# Alt-X \E[104~
-# Alt-Y \E[105~
-# Alt-Z \E[106~
-djgpp|ansi emulation for DJGPP alpha,
- am, bce, msgr, xhp, xon, xt,
- colors#8, it#8, pairs#64,
- acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
- clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
- home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
- indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
- kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
- kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J,
- op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m,
- sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
-
-djgpp203|Entry for DJGPP 2.03,
- OTbs, am,
- cols#80, it#8, lines#25,
- bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
- kcud1=^J, nel=^M^J,
+# The source-code for rxvt actually defines mappings for F21-F35, using
+# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys
+# are rare, so this entry uses the shift- and control-modifiers as in
+# xterm+pcfkeys to define keys past F12.
+#
+# kIC is normally not used, since rxvt performs a paste for that (shifted
+# insert), unless private mode 35 is set.
+#
+# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD
+# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD
+rxvt+pcfkeys|fragment for PC-style fkeys,
+ kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
+ kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
+ kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$,
+ kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^,
+ kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~,
+ kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^,
+ kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^,
+ kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
+ kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
+ kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
+ kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
+ kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
+ kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
+ kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
-djgpp204|Entry for DJGPP 2.04,
- OTbs, am, AX,
- colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
- clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD,
- cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
- cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
- dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
- home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
- il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B,
- kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
- kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m,
- ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
- setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+# rxvt was originally "xvt", first announced in April 1993:
+# http://www.krsaborio.net/linux-desktops/research/1993/0416.html
+#------------------------------------------------------------------------------
+# Article: 567 of comp.os.linux.announce
+# Path: pavo.csi.cam.ac.uk!warwick!uknet!pipex!uunet!zaphod.mps.ohio-state.edu!
+# caen!batcomputer!theory.TC.Cornell.EDU!mdw
+# From: nation@rocket.sanders.com (Robert Nation)
+# Newsgroups: comp.os.linux.announce
+# Subject: xvt upload
+# Date: 16 Apr 1993 18:13:07 GMT
+# Organization: Cornell Theory Center
+# Lines: 13
+# Approved: linux-announce@tc.cornell.edu (Matt Welsh)
+# Message-ID: <1qmsvj$pvj@fitz.TC.Cornell.EDU>
+# NNTP-Posting-Host: theory.tc.cornell.edu
+# Keywords: xvt, xterm, Xwindows
+# Originator: mdw@theory.TC.Cornell.EDU
+#
+# Rxvt has been uploaded to /pub/Linux/Incoming/rxvt.tar.z and
+# rxvt.README on sunsite.unc.edu.
+#
+# Xvt is an xterm replacement which uses a little less memory, and is
+# suitable for use on machines with small memories. Tek4010 support
+# is removed.
+#
+# Modifications were made by Rob Nation (nation@rocket.sanders.lockheed.com)
+# to make it a little more compact, and to add and remove certain features.
+#
+#
+# --
+# Send submissions for comp.os.linux.announce to: linux-announce@tc.cornell.edu
+#------------------------------------------------------------------------------
+#
+# Though its change-log does not mention this, John Davis has stated that he
+# was the author of the changes to use the bce ("new color model") which was
+# incorporated into rxvt 2.11 (June 15, 1995). The change-log does not give
+# dates, nor give developer's names. Initial color support was added for rxvt
+# "2.0", which was sometime in 1994.
+#
+# rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
+# work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
+# mentioned here
+# https://web.archive.org/web/20141016124430/http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
+# was from one of my bug-reports -TD
+#
+# While the color model both for xterm and rxvt was based on Linux console,
+# Olesen (or possibly Davis) diverged in one respect from Linux's bce color
+# behavior: inserting/deleting characters does not fill the newly empty cell
+# with the default background color.
+rxvt|rxvt terminal emulator (X Window System),
+ ncv@,
+ hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
+ vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
+rxvt-color|rxvt terminal emulator (X Window System),
+ use=rxvt,
+rxvt-256color|rxvt 2.7.9 with xterm 256-colors,
+ use=xterm+256color, use=rxvt,
+rxvt-88color|rxvt 2.7.9 with xterm 88-colors,
+ use=xterm+88color, use=rxvt,
+rxvt-xpm|rxvt terminal emulator (X Window System),
+ use=rxvt,
+rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
+ acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
+ \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
+ \302x\263y\363z\362{\343|\330}\234~\376,
+ use=rxvt,
+rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
+ acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k
+ \277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w
+ \302x\263y\363z\362{\343|\330~\376,
+ use=rxvt-cygwin,
-# This is tested using U/Win's telnet. Scrolling is omitted because it is
-# buggy. Another odd bug appears when displaying "~" in alternate character
-# set (the emulator spits out error messages). Compare with att6386 -TD
-uwin|U/Win 3.2 console,
- am, eo, in, msgr, xenl, xon,
- colors#8, it#8, ncv#58, pairs#64,
- acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
- ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH,
- ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP,
- kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
- kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
- khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8,
- rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
- rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
- smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+# This variant is supposed to work with rxvt 2.7.7 when compiled with
+# NO_BRIGHTCOLOR defined. rxvt needs more work...
+rxvt-16color|rxvt with 16 colors like aixterm,
+ ncv#32, use=ibm+16color, use=rxvt,
-# This entry fits the Windows NT console when the _POSIX_TERM environment
-# variable is set to 'on'. While the Windows NT POSIX console is seldom used,
-# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
-# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
-# systems is not, and (surprise!) they match very well.
+#### MRXVT
+# mrxvt 0.5.4
#
-# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
-# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
-# are the installation instructions a pile of mind-numbing bureaucratese,
-# but the termcap entry is actually broken and unusable as given; the :do:
-# capability is misspelled "d".
+# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
+# makes its function-keys different from other flavors of rxvt -TD
#
-# To use this, you need to a bunch of environment variables:
+# Testing with tack:
+# + made custom description (below) to work, though it sets TERM=xterm.
#
-# SET _POSIX_TERM=on
-# SET TERM=ansi
-# SET TERMCAP=location of termcap file in POSIX file format
-# which is case-sensitive.
-# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
-# SET TMP=//C/TEMP
+# Testing with vttest:
+# + While "based on" rxvt, some of the basic functionality is broken. The
+# window collapses to a single line when running several of the screens
+# in vttest, e.g., the tests for cursor movement, screen features,
+# double-sized characters.
+# + The vt52 test works properly, but this is an exception. Due to the
+# other bug(s) most of vttest is untestable.
+# + the color test using ECH shows a gap in the bce model, like rxvt.
+#
+# Testing with xterm "vttest" scripts:
+# + resize.pl does not work because mrxvt does implement CSI 18 t
+# (not in rxvt, but not documented by mrxvt) but not CSI 19 t.
+# + none of the "dynamic colors" (OSC colors) scripts work.
+mrxvt|multitabbed rxvt,
+ XT,
+ kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
+ kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
+ kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
+ kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
+ kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
+ use=rxvt,
+
+mrxvt-256color|multitabbed rxvt with 256 colors,
+ use=xterm+256color, use=mrxvt,
+
+#### ETERM
+# From: Michael Jennings <mej@valinux.com>
#
-# Important note: setting the TMP environment variable in POSIX style renders
-# it incompatible with a lot of other applications, including Visual C++. So
-# you should have a separate command window just for vi. All the other
-# variables may be permanently set in the Control Panel\System applet.
+# Eterm 0.9.3
#
-# You can find out more about the restrictions of this facility at
-# <http://www.nentug.org/unix-to-nt/ntposix.htm>.
-#
-# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
-ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
- am, bw, msgr,
- cols#80, it#8, lines#25,
- bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
- home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
- kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
- ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
-# From: jew@venus.sunquest.com
-# Date: 19 Feb 93 23:41:07 GMT
-# Here's a combination of ansi and vt100 termcap
-# entries that works nearly perfectly for me
-# (Gateway 2000 Handbook and Microsoft Works 3.0):
-pcmw|PC running Microsoft Works,
- am, xenl,
- cols#80, it#8, lines#24, vt#3,
- bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
- clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
- cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
- cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
- ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
- kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
- rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
- ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
- tbc=\E[3g$<2/>,
-
-# From: Federico Bianchi
-# This is the entry for the OpenNT terminal.
-# The ntconsole name is for backward compatability.
-# This is for OpenNT 2.0 and later.
-# Later OpenNT was renamed to Interix.
-#
-# Presently it is distributed by Microsoft as Services For Unix (SFU).
-# The 3.5 beta contains ncurses 4.2 (that is header files and executables,
-# the documentation dates from 1.9.9e) -TD
-
-interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
- am, bw, msgr,
- colors#8, cols#80, lines#25, ncv#3, pairs#64,
- acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
- cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
- cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
- home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
- indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA,
- kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD,
- kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI,
- kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM,
- kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR,
- kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV,
- kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa,
- kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe,
- kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj,
- kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5,
- kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt,
- kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy,
- kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-,
- kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9,
- kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J,
- op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
- rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
- sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
- sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
-
-opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
- lines#35, use=opennt,
-
-opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
- lines#50, use=opennt,
-
-opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
- lines#60, use=opennt,
-
-opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
- lines#100, use=opennt,
-
-# OpenNT wide terminals
-opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
- cols#125, use=opennt,
-
-opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
- lines#35, use=opennt-w,
+# removed kf0 which conflicts with kf10 -TD
+# remove cvvis which conflicts with cnorm -TD
+# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT
+# but does otherwise follow the rxvt+pcfkeys model -TD
+# remove nonworking flash -TD
+# remove km as per tack test -TD
+Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
+ am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
+ btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E>\E[?1l,
+ is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@,
+ kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H,
+ kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M,
+ mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
+ rmso=\E[27m, rmul=\E[24m,
+ rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+ rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
+ 25h,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
+ smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
+ use=ecma+color, use=vt220+cvis,
-opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
- lines#50, use=opennt-w,
+Eterm-256color|Eterm with xterm 256-colors,
+ use=xterm+256color, use=Eterm,
-opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
- lines#60, use=opennt-w,
+Eterm-88color|Eterm with 88 colors,
+ use=xterm+88color, use=Eterm,
-opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
- cols#132, use=opennt,
+#### ATERM
+# Based on rxvt 2.4.8, it has a few differences in key bindings
+aterm|AfterStep terminal,
+ XT,
+ kbs=^?, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
-# OpenNT terminals with no smcup/rmcup (names match termcap entries)
-interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
- rmcup@, smcup@, use=opennt,
+#### XITERM
+# xiterm 0.5-5.2
+# This is not based on xterm's source...
+# vttest shows several problems with keyboard, cursor-movements.
+# see also https://invisible-island.net/xterm/xterm.faq.html#bug_xiterm
+xiterm|internationalized terminal emulator for X,
+ km@,
+ kbs=^?, kdch1=\E[3~, use=klone+color, use=xterm-r6,
-opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
- lines#35, use=opennt-nti,
-opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
- lines#50, use=opennt-nti,
+#### HPTERM
+# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
+# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS
+# chars look like --esr)
+hpterm|X-hpterm|hp X11 terminal emulator,
+ am, da, db, mir, xhp, xon,
+ cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
+ acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r,
+ cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
+ cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
+ hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=\n, kbs=^H,
+ kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
+ kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
+ khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
+ knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
+ memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
+ pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
+ pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
+ pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
+ rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
+ rmul=\E&d@,
+ sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
+ %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
+ sgr0=\E&d@\017, smacs=^N, smir=\EQ, smkx=\E&s1A,
+ smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
+ vpa=\E&a%p1%dY,
+# HPUX 11 provides a color version.
+hpterm-color|HP X11 terminal emulator with color,
+ ccc,
+ colors#64, pairs#8,
+ home=\E&a0y0C,
+ initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
+ op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
-opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
- lines#60, use=opennt-nti,
+#### EMU
+# This is for the extensible terminal emulator on the X11R6 contrib tape.
+# It corresponds to emu's internal emulation:
+# emu -term emu
+# emu's default sets TERM to "xterm", but that doesn't work well -TD
+# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
+# fixes: add civis, cnorm, sgr -TD
+emu|emu native mode,
+ am, bce, mir, msgr, xon,
+ colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
+ acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s
+ \224t\225u\226v\227w\230x\231~\244,
+ bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
+ cnorm=\Ea, cr=\r, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
+ cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
+ cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
+ dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
+ ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
+ hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG,
+ is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED,
+ kcuu1=\EA, kdch1=^?, kent=\r, kf0=\EF00, kf1=\EF01,
+ kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14,
+ kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19,
+ kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05,
+ kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
+ kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
+ op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
+ rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
+ setaf=\Er%i%p1%d;,
+ sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6
+ %t\EU%;,
+ sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
-opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
- lines#100, use=opennt-nti,
+# vt220 Terminfo entry for the Emu emulation, corresponds to
+# emu -term vt220
+# with NumLock set (to make the keypad transmit kf0-kf9).
+# fixes: add am, xenl, corrected sgr0 -TD
+emu-220|Emu-220 (vt200-7bit mode),
+ am, xenl, xon,
+ cols#80, it#8, lines#24, vt#200,
+ acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+ blink=\E[0;5m, bold=\E[0;1m, clear=\E[2J\E[H, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
+ cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
+ dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M,
+ ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
+ hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL,
+ il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h,
+ kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq,
+ kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ,
+ kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~,
+ kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~,
+ kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~,
+ kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw,
+ kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m,
+ ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7,
+ sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;
+ 2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
+ smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, use=vt220+cvis,
-######## COMMON TERMINAL TYPES
-#
-# This section describes terminal classes and maker brands that are still
-# quite common, but have proprietary command sets not blessed by ANSI.
+#### MVTERM
+# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
+# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings
+# indicate that it emulates more than one terminal, but incompletely.
#
+# This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net>
+# It is based on vt102's entry, with some subtle differences, but also
+# has status line
+# supports ANSI colors (except for 'op' string)
+# apparently implements alternate screen like xterm
+# does not use padding, of course.
+mvterm|vv100|SwitchTerm aka mvTERM,
+ am, eslok, hs, km, mir, msgr, xenl, xon,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0,
+ fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy,
+ kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw,
+ op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m,
+ rmul=\E[m,
+ rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H,
+ sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
-#### Altos
+#### MTERM
#
-# Altos made a moderately successful line of UNIX boxes. In 1990 they were
-# bought out by Acer, a major Taiwanese manufacturer of PC-clones.
-# Acer has a web site at http://www.acer.com.
+# This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
#
-# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
-# His comments suggest they were shipped with the system.
+# "mterm -type ansi" sets $TERM to "ansi"
+mterm-ansi|ANSI emulation,
+ am, bw, mir, msgr,
+ it#8,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
+ el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=,
+ il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m,
+ is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, ri=\E[T, rmacs=^O,
+ rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, vpa=\E[%i%p1%dd, use=ecma+index,
+# mterm normally sets $TERM to "mterm"
+mterm|mouse-sun|Der Mouse term,
+ am, bw, mir,
+ it#8,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^N, cuf1=^S,
+ cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C,
+ home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=\r^U, ri=^W,
+ rmir=^O, rmso=^T, smir=^Q, smso=^V,
+# "mterm -type decansi" sets $TERM to "decansi"
#
+# note: kdch1, kfnd, kslt are in the source code, but do not work -TD
+decansi|ANSI emulation with DEC compatibility hacks,
+ am, mir, msgr, xenl,
+ colors#8, it#8, pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0,
+ home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL,
+ il1=\E[L, ind=\E[S, invis=\E[8m, is2=\E)0\E[r\017, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~,
+ nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m, ri=\E[T, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
+ u7=\E[6n, vpa=\E[%i%p1%dd, use=ecma+index,
+ use=vt220+cvis,
-# (altos2: had extension capabilities
-# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
-# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
-# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
-# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
-# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
-# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
-# :HL=^AP\r:SP=\E[i:\
-# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
-# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
-# Comparison with the k* capabilities makes it obvious that the c* things are
-# shift keys. I have renamed them to keys 32 and up accordingly. Also,
-# :sr: was given as a boolean-- esr)
-altos2|alt2|altos-2|altos II,
- cols#80, it#8, lines#24, xmc#0,
- clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
- ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
- if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
- is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
- kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
- kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
- kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
- kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
- kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
- kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
- nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
- smam=\E[?7h, smso=\E[7m, smul=\E[4m,
-# (altos3: had extension capabilities
-# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
-# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
-# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
-# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
-# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
-# :HL=^AP\r:SP=\E[i:\
-# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
-altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
- blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
-altos4|alt4|altos-4|altos IV,
- use=wy50,
-# (altos7: had extension capabilities:
-# :GG#0:GI=\EH8:GF=\EH7:\
-# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
-# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
-# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
-# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
-# Comparison with the k* capabilities makes it obvious that the c* things are
-# shift keys. I have renamed them to keys 32 and up accordingly. I have
-# also made this entry relative to adm12 in order to give it an <sgr>. The
-# <invis> imported by use=adm+sgr may work, let me know. -- esr)
-altos7|alt7|altos VII,
- am, mir,
- cols#80, lines#24, xmc#0,
- acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
- clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
- ind=^J, invis=\EG1,
- is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
- kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
- kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
- kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
- kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
- kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
- kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
- kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
- knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
- rmir=\Er, smir=\Eq, use=adm+sgr,
-altos7pc|alt7pc|altos PC VII,
- kend=\ET, use=altos7,
-
-#### Hewlett-Packard (hp)
-#
-# Hewlett-Packard
-# 8000 Foothills Blvd
-# Roseville, CA 95747
-# Vox: 1-(916)-785-4363 (Technical response line for VDTs)
-# 1-(800)-633-3600 (General customer support)
-#
-#
-# As of March 1998, HP no longer has any terminals in production.
-# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
-# supported (they still have parts). So are the 2392a and 2394a.
-# See the WORKSTATION CONSOLES section for the 700s.
+#### VWM
+# http://vwm.sourceforge.net/
#
+# VWM 2.0.2 (2009-05-01)
+# vwmterm is a terminal emulator written for the VWM console window manager.
+# This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
+vwmterm|(vwm term),
+ am, bce, ccc, mir, msgr, npc, xenl, xon,
+ colors#8, pairs#64,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m,
+ ed=\E[J, el=\E[K, home=\E[H, il1=\E[L, ind=\n, invis=\E[8m,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
+ kf11=\E[22~, kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
+ kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
+ rmam=\E[?7l, rs1=\E[H\E[J\E[m\Ec, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ sgr=\E[0;10%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, smso=\E[3m,
+ smul=\E[4m, use=vt220+cvis, use=xterm+alt1049,
-# Generic HP terminal - this should (hopefully) work on any HP terminal.
-hpgeneric|hp|hewlett-packard generic terminal,
- OTbs, OTpt, am, da, db, mir, xhp,
- cols#80, lines#24, lm#0, vt#6,
- bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
- ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
- ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
- sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
- vpa=\E&a%p1%dY,
-
-hp110|hewlett-packard model 110 portable,
- lines#16, use=hpgeneric,
-
-hp+pfk+cr|hp function keys with CR,
- kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
- kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
-
-hp+pfk-cr|hp function keys w/o CR,
- kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
- kf8=\Ew,
-
-# The hp2621s use the same keys for the arrows and function keys,
-# but not separate escape sequences. These definitions allow the
-# user to use those keys as arrow keys rather than as function
-# keys.
-hp+pfk+arrows|hp alternate arrow definitions,
- kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
- kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
- kll=\Eq\r, kri=\Es\r,
-
-hp+arrows|hp arrow definitions,
- kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
- kind=\ES, kll=\EF, kri=\ET,
-
-# Generic stuff from the HP 262x series
+#### MGR
#
-hp262x|HP 262x terminals,
- xhp,
- blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
- invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
- kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
- krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
- sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
- sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
-
-# Note: no <home> on HPs since that homes to top of memory, not screen.
-# Due to severe 2621 braindamage, the only way to get the arrow keys to
-# transmit anything at all is to turn on the function key labels
-# with <smkx>, and even then the user has to hold down shift!
-# The default 2621 turns off the labels except when it has to to
-# enable the function keys. If your installation prefers labels
-# on all the time, or off all the time (at the "expense" of the
-# function keys), use 2621-nl or 2621-wl.
+# MGR is a Bell Labs window system lighter-weight than X.
+# These entries describe MGR's xterm-equivalent.
+# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
#
-# Note: there are newer ROMs for 2621's that allow you to set
-# strap A so the regular arrow keys xmit \EA, etc, as with the
-# 2645. However, even with this strap set, the terminal stops
-# xmitting if you reset it, until you unset and reset the strap!
-# Since there is no way to set/unset the strap with an escape
-# sequence, we don't use it in the default.
-# If you like, you can use 2621-ba (brain-damaged arrow keys).
-hp2621-ba|2621 w/new rom and strap A set,
- rmkx@, smkx@, use=hp+arrows, use=hp2621,
-
-# hp2621 with function labels. Most of the time they are off,
-# but inside vi, the function key labels appear. You have to
-# hold down shift to get them to xmit.
-hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
- is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
-hp2621-fl|hp 2621,
- xhp@, xon,
- pb#19200,
- cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
- ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
- sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
- use=hp+pfk+cr, use=hpgeneric,
-
-# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
-hp2621p|hp 2621 with printer,
- mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
-
-hp2621p-a|hp2621p with fn as arrows,
- use=hp+pfk+arrows, use=hp2621p,
-
-# hp2621 with k45 keyboard
-hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
- kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
-
-# 2621 using all 48 lines of memory, only 24 visible at any time.
-hp2621-48|48 line 2621,
- lines#48,
- cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
- use=hp2621,
-# 2621 with no labels ever. Also prevents vi delays on escape.
-hp2621-nl|hp 2621 with no labels,
- kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
- use=hp2621-fl,
+mgr|Bellcore MGR (non X) window system terminal emulation,
+ am, km, xon,
+ bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=\r,
+ csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
+ cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
+ dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
+ dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
+ ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
+ il1=\Ea$<3>, ind=\n, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, nel=\r\n, rev=\E1n, rmam=\E5S,
+ rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
+ smul=\E4n,
+mgr-sun|Mgr window with Sun keyboard,
+ ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
+ kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
+ kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
+ kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
+ kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
+ kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
+ kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
+mgr-linux|Mgr window with Linux keyboard,
+ ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
+ kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
+ kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
-# Needed for UCB ARPAVAX console, since lsi-11 expands tabs
-# (wrong).
-#
-hp2621-nt|hp 2621 w/no tabs,
- ht@, use=hp2621,
+#### SIMPLETERM
+# st.suckless.org
-# Hp 2624 B with 4 or 10 pages of memory.
+st|stterm| simpleterm,
+ use=st-0.8,
+
+# Reviewed 0.8.2:
+# In tack,
+# there is some problem turning off line-drawing
+# shift+control function-keys do nothing; shift+control cursor keys work
+# the padding tests make the terminal non-functional.
+# In vttest,
+# SD/SU work
+# SL/SR/REP do not work
+# ECMA-48 cursor movement works, e.g., CHA, CBT, etc.
+#
+# This entry discards the ccc/initc capabilities from st-0.7 because they
+# belong in st-256color.
+st-0.8|simpleterm 0.7,
+ dim=\E[2m, kcbt@, kent@, oc=\E]104\007,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+ %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
+ Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
+ kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
+ kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
+ kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
+ use=ecma+strikeout, use=st-0.6,
+
+# Reviewed 0.7:
+# dim is intermittent, sometimes works, sometimes does not
+# italics may show up with yellow color
+# has control cursor-keys, alt cursor-keys, still no combinations
+# has control pageup/down
+# tmux extensions, see TERMINFO EXTENSIONS in tmux(1)
+# Se and Ss are implemented in the source-code, but the terminfo
+# provided with the source is incorrect, since Se/Ss are mis-coded
+# as booleans rather than strings.
+st-0.7|simpleterm 0.7,
+ ccc,
+ dim=\E[2m,
+ initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*
+ %{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
+ kcbt@, kent@, oc=\E]104\007,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+ %t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
+ Ms=\E]52;%p1%s;%p2%s\007, kDN3=\E[1;3B, kDN5=\E[1;5B,
+ kLFT3=\E[1;3D, kLFT5=\E[1;5D, kNXT3=\E[6;3~,
+ kNXT5=\E[6;5~, kPRV3=\E[5;3~, kPRV5=\E[5;5~,
+ kRIT3=\E[1;3C, kRIT5=\E[1;5C, kUP3=\E[1;3A, kUP5=\E[1;5A,
+ use=ecma+strikeout, use=st-0.6,
+
+# st-0.4.1
+#
+# This version uses a table which supports a single modifier (a subset of
+# xterm's keys, using the same scheme). Because it supports only a single
+# modifier in this table, function keys f36-f48 are normally unavailable
+# because they are assigned to modifier-4.
+#
+# The program assigns TERM to match the program name (the upstream source says
+# "st", but Debian renames it to "stterm").
+#
+# The source includes two entries which are not useful here:
+# st-meta| simpleterm with meta key,
+# st-meta-256color| simpleterm with meta key and 256 colors,
+# because st's notion of "meta" does not correspond to the terminfo definition.
+# Rather, it acts like xterm - when the meta feature is disabled.
+#
+# Removed invis -TD
+# Added eo, removed ul -TD
+#
+# Reviewed st 0.5:
+# implements control-modifier, but not control-shift for special keys
+# implements alt-modifier, but not alt-shift for special keys
+#
+# Reviewed st 0.6:
+# http://git.suckless.org/st/log/st.info
+# Tmux unofficial extensions, see TERMINFO EXTENSIONS in tmux(1)
+# still has no function keys past kf36 (no combinations of modifiers)
+# no application keypad mode, e.g, kent.
+st-0.6|simpleterm 0.6,
+ am, bce, hs, mir, msgr, npc, xenl, XT,
+ colors#8, cols#80, it#8, lines#24, pairs#64,
+ acsc=+C\,D-A.B0E``aaffgghFiGjjkkllmmnnooppqqrrssttuuvvwwxxyy
+ zz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
+ flash=\E[?5h$<100/>\E[?5l, fsl=^G, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
+ is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, kEND=\E[1;2F,
+ kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
+ kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, ka3=\E[5~, kb2=\EOu,
+ kbs=^?, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, kclr=\E[3;5~,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F,
+ kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R,
+ kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
+ kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
+ kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
+ kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
+ kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
+ kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
+ kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
+ kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
+ kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
+ kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
+ kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
+ kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
+ kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
+ kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
+ kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
+ kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
+ kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, mc0=\E[i, mc4=\E[4i,
+ mc5=\E[5i, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=\E(B, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+ %t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
+ sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smkx=\E[?1h\E=,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
+ u7=\E[6n, u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, Se=\E[2 q,
+ Ss=\E[%p1%d q, use=ecma+index, use=xterm+alt1049,
+ use=vt220+cvis, use=xterm+sl, use=ecma+italics,
#
-# Some assumptions are made with this entry. These settings are
-# NOT set up by the initialization strings.
+# st-0.1.1
#
-# Port Configuration
-# RecvPace=Xon/Xoff
-# XmitPace=Xon/Xoff
-# StripNulDel=Yes
-#
-# Terminal Configuration
-# InhHndShk=Yes
-# InhDC2=Yes
-# XmitFnctn(A)=No
-# InhEolWrp=No
+# Note: the original terminfo description uses leading blank to persuade
+# ncurses to use "st" as its name. Proper fix for that is to use "st" as an
+# alias.
#
-# Note: the 2624 DOES have a true <home>, believe it or not!
+# Reading the code shows it should work for aixterm 16-colors
+# - added st-16color
#
-# The 2624 has an "error line" to which messages can be sent.
-# This is CLOSE to what is expected for a "status line". However,
-# after a message is sent to the "error line", the next carriage
-# return is EATEN and the "error line" is turned back off again!
-# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
+# Using tack:
+# - set eo (erase-overstrike)
+# - set xenl
+# - tbc doesn't work
+# - hts works
+# - cbt doesn't work
+# - shifted cursor-keys send sequences like rxvt
+# - sgr referred to unimplemented "invis" mode.
+# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
+simpleterm|old-st| simpleterm 0.1.1,
+ am, eo, mir, msgr, ul, xenl,
+ colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^?,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
+ rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+ %t;7%;m,
+ sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
+ use=vt220+cvis, use=ecma+index,
+st-16color|stterm-16color|simpleterm with 16-colors,
+ use=ibm+16color, use=st,
+# Tested with st 0.8.2
+# The issue with the titlebar is fixed, though st is very slow.
+# In st 0.7, 256 colors "works", but when running xterm's test-scripts, some
+# garbage is shown in the titlebar.
+#
+# terminal wants to use TERM=stterm-256color, but that is longer than 14
+# characters, making the choice nonportable.
+st-256color|stterm-256color|simpleterm with 256 colors,
+ use=xterm+256color, use=st,
+
+#### TERMINATOR
+# https://github.com/software-jessies-org/jessies/wiki/Terminator
+#
+# Tested using the Debian package org.jessies.terminator 6.104.3256 on 64-bit
+# Debian/current -TD (2011/8/20)
#
-# This entry supports emacs (and any other program that uses raw
-# mode) at 4800 baud and less. I couldn't get the padding right
-# for 9600.
+# There were some packaging problems:
+# a) using Java, the program starts off using 50Mb, and climbs from there,
+# up to 114Mb after testing (no scrollback).
+# b) it insists on reinstalling its terminal description in $HOME/.terminfo
+# (two copies, just in case the host happens to be Mac OS X).
+# I deleted this after testing with tack.
#
-# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
-hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
- da, db,
- lm#96,
- flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
- use=hp+labels, use=scrhp,
-
-# This hp2626 entry does not use any of the fancy windowing stuff
-# of the 2626.
+# Issues/features found with tack:
+# a) tbc does not work (implying that hts also is broken).
+# Comparing with the tabs utility shows a problem with the last tabstop on
+# a line.
+# b) has xterm-style shifted function-key strings
+# meta also is used, but control is ignored.
+# c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
+# meta)
+# d) some combinations of shift/control send xterm-style sequences for
+# insert/delete/home/end.
+# e) numeric keypad sends only numbers (compare with vttest).
+# f) meta mode (km) is not implemented.
#
-# Indeed, terminfo does not yet handle such stuff. Since changing
-# any window clears memory, it is probably not possible to use
-# this for screen opt.
+# Issues found with ncurses test-program:
+# a) bce is inconsistently implemented
+# b) widths of Unicode values above 256 do not always agree with wcwidth.
#
-# ed is incredibly slow most of the time - I am guessing at the
-# exact padding. Since the terminal uses xoff/xon this is intended
-# only for cost computation, so that the terminal will prefer el
-# or even dl1 which is probably faster!
+# Checked with vttest, found low degree of compatibility there.
#
-# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
-# extra slow on the last line of the window.
+# Checked with xterm's scripts, found that the 256-color palette is fixed.
#
-# The padding probably should be changed.
+# Fixes:
+# a) add sgr string
+# b) corrected sgr0 to reset alternate character set
+# c) modified smacs/rmacs to use SCS rather than SI/SO
+# d) removed bce
+# e) removed km
#
-hp2626|hp2626a|hp2626p|hp 2626,
- da, db,
- lm#0, pb#19200,
- ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
- is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
- use=hp+labels, use=scrhp,
+# Revisiting in May 2019, the Debian package was no longer available, and a
+# developer-provided ".deb" does not work. However, a usable Windows ".msi"
+# (which relies upon Cygwin) can be tested. The developers provide a terminfo,
+# but some of the features it lists do not work reliably (bce, italics, invis).
+#
+# tack:
+# tbc fails
+# invis attribute fails
+# key-definitions could be expanded, with some work:
+# + supports xterm-style cursor key-modifiers for shift
+# + supports xterm-style function key-modifiers for shift,control,alt
+# + supports xterm-style editing key-modifiers for shift,control,alt
+# (kbs=^?)
+# ncurses test-program:
+# "C" menu shows that bce implementation is incomplete
+# italics did not work
+# dim worked once in tack, but not in ncurses test-program
+# "F" thick-line characters do not display
+# vttest:
+# terminal does not respond to 80/132-column switching
+# wrapping at the right margin is erratic
+# there are several problems in the cursor-movements and screen-features
+# no vt52, no double-sized characters
+# Device attributes response says it is a vanilla VT100
+# does not respond to xterm mouse controls
+# alternate screen tests do not fill the screen, return wrong position
+# window modify/report operations do not work
+# miscellaneous ISO-6429 tests, e.g., REP, do not work
+# CBT, CHT, HPR, CNL,CPL, VPR do not work
+#
+# removed the cancel for "hs", removed cbt, invis, corrected sgr -TD
+# use xterm+256setaf, etc -TD
+terminator|Terminator no line wrap,
+ bce, eo, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, lm#0,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bold=\E[1m, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=^G, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E[?47l\E=\E[?1l,
+ is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^?,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
+ rev=\E[7m, ri=\EM, rmacs=\E(B, rmir=\E[4l, rmso=\E[27m,
+ rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
+ s0ds=\E(B, s1ds=\E(0, sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p1%p3%|%t;7
+ %;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[m\E(B, smacs=\E(0, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, tsl=\E]2;%p1, vpa=\E[%i%p1%dd,
+ use=ecma+italics, use=ecma+index, use=xterm+256setaf,
+ use=xterm+sl-twm, use=xterm+alt1049, use=vt220+cvis,
+
+#### TERMINOLOGY
+# https://www.enlightenment.org/about-terminology
+# https://github.com/borisfaure/terminology
+#
+# 2014/10/14:
+# Tested terminology-0.3.0, 0.6.1, using tack and vttest. This is not a vt100
+# emulator, nor is it compatible with xterm, but it uses a few features from
+# both -TD
+#
+# General comments:
+# cursor does not fill on focus
+# there are pervasive problems with clearing/erasing parts of the screen
+# resizing the window causes it to stop listening to the keyboard
+# tack -
+# doesn't understand vt100 CPR needed for resize
+# no CBT
+# no cvvis
+# has invis
+# no blink
+# uses bce model for colors, but (see below) fails the vttest screens
+# has partial support for 256color feature.
+# tack function-keys (a subset of xterm+pcf0), and
+# tack cursor-keys (a subset of xterm+pce2):
+# ctrl+shift (ignored)
+# 2 shift
+# shift-alt modifier -> shift (2)
+# 3 alt
+# 4
+# 5 ctrl
+# tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
+# ctrl + khome/kend works - none of the other modifiers do
+# vttest -
+# spits lots of messages from termptyesc.c especially in vttest.
+# no 132-column mode
+# fails menu 1, 2 (definitely not vt100-compatible)
+# primary (claims vt420 with several options, apparently none work) and
+# secondary report says (perhaps... vt420): \E[>41;285;0c
+# CHA, HPR, VPA, CNL, CPL work
+# BCE with ED/EL - fail
+# BCE with ECH/indexing - fail
+# SD/SU work
+# unlike teken, background light/dark works
+# can set title
+# X10 and Normal mouse work
+# Any-event mouse works
+# Mouse button-event works
+#
+# This description uses xterm+pcf0, which is misleading because the program
+# does not handle combinations of modifiers - but listing them all would
+# involve more effort than its developers spent -TD
+terminology-0.6.1|EFL-based terminal emulator,
+ mc5i@,
+ blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
+ kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kind=\E[1;2B, kri=\E[1;2A,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8
+ %;m%?%p9%t\016%e\017%;$<2>,
+ vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
+ kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
+ kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
+ kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
+ kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
+ kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
+ kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
+ kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
+ use=xterm+256setaf,
+
+# 2017-11-11
+# Tested terminology 1.0.0
+#
+# tack -
+# Shifted cursor-keys send nothing, but xterm modifiers for control+shift
+# and control+alt were added like xterm+pcc2
+# Editing keys have some features from xterm+pce2
+# Changed from xterm+pcf0 to xterm+pcf2
+#
+# vttest -
+# REP, SL, SR fail
+#
+# Aside from the partial fixes for function/cursor/editing keys, no improvement
+# in other tests versus 0.6.1
+terminology-1.0.0|EFL-based terminal emulator,
+ dim=\E[2m, flash=\E[?5h$<100/>\E[?5l, kend=\E[OF,
+ khome=\E[OH, rmacs=\E(B,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
+ %?%p1%p3%|%t;7%;%?%p7%t;8%;m$<2>,
+ sgr0=\E(B\E[m, smacs=\E(0, use=ecma+italics,
+ use=vt220+cvis, use=xterm+x11mouse, use=xterm+pce2,
+ use=xterm+pcf2, use=xterm+pcc2, use=terminology-0.6.1,
+
+# 2020/12/26:
+# Tested terminology 1.8.1 using tack and vttest.
+# tack -
+# flash does not work
+# italics and crossed-out text work
+# no meta mode
+# vttest -
+# DA1 says this is a VT420 with with 132 columns, NRCS, horizontal scrolling
+# DA2 says this is a VT510, version 33.7
+# NRCS does not work, program hangs in the locking shift test.
+# some of the VT420 rectangle operations work
+# left/right margins do not work
+# most of DECSCUSR works
+# most problems with bce are fixed.
+terminology-1.8.1|EFL-based terminal emulator,
+ km@,
+ cvvis@, flash@, initc@, kcbt=\E[Z, rmm@, smm@, Ms@,
+ use=ecma+index, use=xterm+256setaf, use=ansi+rep,
+ use=ecma+strikeout, use=xterm+sm+1006,
+ use=xterm+pcfkeys, use=xterm+tmux, use=vt220+cvis,
+ use=xterm-basic, use=ecma+italics,
+
+terminology|EFL-based terminal emulator,
+ use=terminology-1.8.1,
+
+######## OPENGL CLIENTS
+
+#### Alacritty
+# https://github.com/jwilm/alacritty
+# Version 0.6.0 (2020/11/25)
+# Version 0.4.0 (2019/11/25)
+# Version 0.3.3 (2019/08/03)
+# Version 0.2.1 (2018/10/03)
+# Project started in 2016/02, uses Rust and OpenGL, and in contrast to (most X
+# terminal programs) is not designed to run with a remote server.
+#
+# Packaged in Arch Linux -
+# vttest:
+# initial screensize 24x80
+# no DECCOLM (does not switch between 80/132 columns)
+# otherwise, passes wrapping test
+# no DECSCNM
+# identifies as a vt102
+# numeric keypad does not send expected codes (seen in 0.4.0)
+# passes bce test
+# vt220:
+# ECH works in 0.3.3 (0.2.1 left text on right margin)
+# no SRM, DECSCA
+# vt320:
+# fails DECXCPR
+# does not implement any of the DECRQM/DECRPM controls
+# does not implement any of the DECRQSS controls
+# vt420:
+# no DECLRMM
+# no DECBI, DECFI
+# other:
+# fails CHT, otherwise ECMA-48 cursor movement ok
+# fails ERM/SPA, SL, SR, passes REP, SD, SU
+# xterm:
+# no X10 mouse
+# has normal and highlight mouse
+# has any-event and button-event mouse
+# + does support SGR-mouse
+# + does not correctly support focus in/out events (seen in 0.4.0)
+# cursor-position wrong after alternate-screen (fixed in 0.4.0)
+# none of the dtterm controls work
+# tack:
+# bell and flash do not work
+# blink does not work
+# italics and crossed-out work (latter did not work in 0.2.1)
+# function-keys work up (tested combinations which window manager allows)
+# treats meta as escape-prefix
+#
+# The program sources include "alacritty" and "alacritty-direct", which are
+# copied from "xterm-256color" and "xterm-direct" (but using semicolon for
+# subparameter delimiter). Refactored here to use ncurses building blocks -TD
+alacritty|alacritty terminal emulator,
+ rs1=\Ec\E]104\007, use=xterm+256color,
+ use=alacritty+common,
+
+alacritty-direct|alacritty with direct color indexing,
+ use=xterm+indirect, use=alacritty+common,
+
+# cancel km, since it is not actually meta mode -TD
+# added ecma+strikeout in 0.3.3 -TD
+# added xterm+sl-twm in 0.3.3 -TD
+alacritty+common|base fragment for alacritty,
+ km@, npc,
+ kb2=\EOE, kbs=^?, kcbt=\E[Z, kent=\EOM, Se=\E[0 q,
+ Smulx=\E[4\:%p1%dm, use=ecma+index, use=xterm+sm+1006,
+ use=xterm-basic, use=xterm+app, use=ansi+rep,
+ use=xterm+tmux, use=ecma+strikeout, use=xterm+sl-twm,
+ use=ecma+italics, use=xterm+pce2, use=xterm+pcc2,
+ use=xterm+pcf2,
+
+#### Kitty
+# https://github.com/kovidgoyal/kitty
+# Project started in 2016/10 (see alacritty), but is a Python script rather
+# than Rust, using OpenGL. The same caveats regarding remote connections
+# apply. This is not an X terminal, though (like alacritty), it copies
+# features from xterm.
+#
+# Regarding the name "kitty", that is a pun, reflected in the description.
+# But see
+# http://www.9bis.net/kitty/
+# https://github.com/kovidgoyal/kitty/issues/9
+# https://github.com/kovidgoyal/kitty/issues/1025
+# and
+# http://lists.gnu.org/archive/html/bug-ncurses/2018-09/msg00005.html
+# https://github.com/kovidgoyal/kitty/issues/879
+#
+# Version 0.19.1
+# changes since 0.13.3:
+# vttest
+# ISO-6429
+# REP works, though using unspecified behavior
+# xterm
+# xterm's SGR-mouse mode is recognized.
+# does recognize original alternate-screen
+# bug: mouse focus in/out does not work.
+# bug: X10 mouse mode responds like any-event
+# bug: highlight-tracking does not work; terminal hangs.
+#
+# tack
+# rs1 adds an empty string for resetting title- and other OSC-strings.
+# italics work
+#
+# Version 0.13.3
+# Notes:
+# initial screensize 71x22
+# does not respond to "resize -s"
+# resizing with window manager gives no clues
+# vttest
+# does not switch between 80/132 columns
+# fails wrapping test, copying vte/rxvt
+# no reverse-background, no blink
+# claims to be vt200:
+# primary \E[?62;c
+# secondary \E[>1;4000;12c
+# however -
+# no GR in the locking-shifts screen
+# no NRCS or ISO-2022, anyway
+# no VT52
+# VT220:
+# has DECTCEM, ECH, but no SRM and DECSCA
+# has operating condition report, none of the others
+# VT320:
+# has SU/SD
+# DECRQSS ok for DECSTBM, SGR, none of the others
+# no status-line
+# VT420:
+# DECXCPR device status works, none of the others
+# no left/right margins
+# has DECCARA, but not DECERA, DECFRA, DECRARA, DECSERA
+# inside of DECCARA is uncolored
+# line-drawing with DECCARA does not work
+# aside from left/right margins, editing sequences look ok
+# no DECFI, DECBI
+# color:
+# fails ECH test for bce
+# ISO-6429
+# fails REP, SL, SL, but other cursor-movement ok
+# xterm:
+# does not recognize original alternate-screen
+# cursor-position wrong after alternate-screen
+# has normal mouse, any-event, any-button, but
+# no X10 mouse
+# no mouse-highlight tracking
+# no DEC locator
+# dtterm - only supports report-size chars/pixels
+# recognizes tcap-query
+# tack:
+# flash doesn't work
+# italics do not work
+# bce should be set (but see vttest)
+#* developer's terminfo stopped at kf25, but the program continues,
+# copying xterm for the rest of the control+fkey sequence
+# (but only one modifier is supported, like iTerm2).
+#* it omitted shifted pageup/down
+#* control+editing keys work
+# In contrast to function-keys, some additional modifier combinations
+# act like xterm for the editing/cursor-keys, e.g., alt+shift. While
+# the implementation is incomplete, the building-blocks are consistent
+# with what has been implemented -TD
+# DECKPAM does not work -TD
+#* ka1, ka3, kc1, kc3 were bogus (removed)
+#* meta sends escape (removed kmm) -TD
+#* cvvis does not make cursor "more visible" -TD
+kitty|KovId's TTY,
+ use=xterm+256color, use=kitty+common,
+kitty-direct|KovId's TTY using direct colors,
+ oc=\E]104\007, use=xterm+direct2, use=kitty+common,
+kitty+common|KovId's TTY common properties,
+ am, mc5i, mir, msgr, npc, xenl,
+ cols#80, it#8, lines#24,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz{{||}}~~,
+ bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\n, kbs=^?, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kf1=\EOP,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[1;2P,
+ kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, kf17=\E[15;2~,
+ kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~,
+ kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
+ kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R,
+ kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~,
+ kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
+ kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf4=\EOS,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\EOH, kich1=\E[2~, kind=\E[1;2B, knp=\E[6~,
+ kpp=\E[5~, kri=\E[1;2A, op=\E[39;49m, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l,
+ rmso=\E[27m, rmul=\E[24m, rs1=\E]\E\\\Ec, sc=\E7,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;
+ %?%p1%p3%|%t;7%;m,
+ sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, use=ansi+enq, use=ansi+rep,
+ use=xterm+sm+1006, use=ecma+index, use=xterm+sl-twm,
+ use=ecma+strikeout, use=xterm+pce2, use=xterm+pcc2,
+ use=ecma+italics, use=xterm+alt1049, use=att610+cvis,
+ use=xterm+tmux,
+
+######## WEB CLIENTS
+
+#### DomTerm
+# https://domterm.org
+#
+# Quoting its webpage:
+# The domterm command runs a server that manages sessions (usually shell
+# processes). The user interface and terminal emulation is handled by a
+# JavaScript library that can run in a regular web browser or an embedded
+# browser such as Electron, using Web Sockets to talk to the server.
+#
+# it can connect to, and display in, a web browser, or as a standalone Qt
+# application. Either way, it displays in the current desktop session.
+#
+# Testing current code (2019/07/06) with Fedora 30:
+# tack
+# no flash
+# no beep
+# no dim
+# no blink
+# no invis
+# no italics
+# ok smxx/rmxx
+# bce screen shows diagonal lines...
+# kf6 sends nothing
+# kf11 toggles maximize
+# cursor-key application mode works
+# numeric keypad application does not work; keys always send face-codes
+# sends utf-8 for meta, like xterm
+# vttest
+# has problems with menu #1 (wrapping)
+# DA = vt200 with 132 columns, color
+# DA2 = 990, 100300 ("\E[>990;100300;0c")
+# no VT52, no double-size characters
+# vt220 ECH test works, SRM, DECSCA do not
+# S7C1T/S8C1t does not work
+# DECUDK does not work
+# CNL does not work; the other ECMA-48 cursor-movement tests work
+# REP sort-of works (does not match xterm)
+# SD/SU work, but not SL/SR
+# window reporting: works for size in chars/pixels, but not other tests
+# X10 mouse clicks work -- but return 4 rather than 1 for codes
+# any-event mouse mode acts like any-button mode
+# implements SGR mouse-mode
+# other:
+# does not implement initc
+# does accept either colons or semicolon in 38/48 SGR.
+domterm|DomTerm web client,
+ npc,
+ bel@, blink@, dim@, invis@, kcbt=\E[Z, ritm@, rmkx=\E[?1l,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+ %t;7%;m,
+ sitm@, smkx=\E[?1h, use=xterm+256setaf, use=ecma+index,
+ use=xterm+sm+1006, use=xterm+pcfkeys, use=xterm-basic,
-# This entry is for sysline. It allocates a 23 line window with
-# a 115 line workspace for regular use, and a 1 line window for
-# the status line.
-#
-# This assumes port 2 is being used.
-# Turn off horizontal line, Create ws #1 with 115 lines,
-# Create ws #2 with 1 line, Create window #1 lines 1-23,
-# Create window #2 lines 24-24, Attach cursor to workspace #1.
-# Note that this clears the tabs so it must be done by tset before
-# it sets the tabs.
+######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
#
-hp2626-s|hp 2626 using only 23 lines,
- eslok, hs,
- lines#23,
- fsl=\E&d@\E&w7f2p1I\E&w4f1I,
- is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
- tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
-# Force terminal back to 24 lines after being 23.
-hp2626-ns|hp 2626 using all 24 lines,
- is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
- use=hp2626,
-# Various entries useful for small windows on 2626.
-hp2626-12|hewlett-packard 2626 12 lines,
- lines#12, use=hp2626,
-hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
- cols#40, lines#12, use=hp2626,
-hp2626-x40|hewlett-packard 2626 40 columns,
- cols#40, use=hp2626,
-hp2626-12-s|hewlett-packard 2626 11 lines plus status,
- lines#11, use=hp2626-s,
-#
-# hp2627 color tubes from University of Wisconsin
-#
-hp2627a-rev|hp 2627 with reverse video colors,
- cr=^M, cud1=^J, ht=^I, ind=^J,
- is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
- kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
- smul=\E&dD\E&v1S, use=hp2621-nl,
-hp2627a|hp 2627 color terminal with no labels,
- cr=^M, cud1=^J, ht=^I, ind=^J,
- is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
- kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
- rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
- use=hp2621-nl,
-hp2627c|hp 2627 color (cyan) terminal with no labels,
- cr=^M, cud1=^J, ht=^I, ind=^J,
- is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
- kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
+# Columbus UNIX virtual terminal. This terminal also appears in
+# UNIX 4.0 and successors as line discipline 1 (?), but is
+# undocumented and does not really work quite right.
+cbunix|cb unix virtual terminal,
+ OTbs, am, da, db,
+ cols#80, lines#24, lm#0,
+ bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
+ el=\EK, ich1=\EO, il1=\EP, ind=\n, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
+ smso=\Ea^D, smul=\Ea^A,
+# (vremote: removed obsolete ":nl@:" -- esr)
+vremote|virtual remote terminal,
+ am@,
+ cols#79, use=cbunix,
-# hp2640a doesn't have the Y cursor addressing feature, and C is
-# memory relative instead of screen relative, as we need.
-#
-hp2640a|hp 2640a,
- cup@, rmkx@, smkx@, use=hp2645,
+pty|4bsd pseudo teletype,
+ cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
+ smso=\Ea$, smul=\Ea!, use=cbunix,
-hp2640b|hp2644a|hp 264x series,
- rmkx@, smkx@, use=hp2645,
+#### Emacs
-# (hp2641a: removed unknown :gu: -- esr)
-hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
- am, da, db, mir, xhp,
+# https://www.emacswiki.org/emacs/AnsiTerm
+# https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
+#
+# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
+eterm|gnu emacs term.el terminal emulation,
+ am, mir, xenl,
cols#80, lines#24,
- bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
- ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
- if=/usr/share/tabset/std, il1=\EL, ind=^J,
- is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
- rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
- vpa=\E&a%p1%2dY,
-
-# This terminal should be used at 4800 baud or less. It needs padding for
-# plain characters at 9600, I guessed at an appropriate cr delay. It really
-# wants ^E/^F handshaking, but that doesn't work well even if you write
-# software to support it.
-hp2645|hp45|HP 2645 series,
- pb#9600,
- blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
- kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
- ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
- kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
- rmkx=\E&s0A,
- sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
- sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
-# You should use this terminal at 4800 baud or less.
-hp2648|hp2648a|HP 2648a graphics terminal,
- clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
- dch1=\EP$<7>, ip=$<5>, use=hp2645,
-
-# The HP 150 terminal is a fairly vanilla HP terminal, with the
-# clreol standout problem. It also has graphics capabilities and
-# a touch screen, which we don't describe here.
-hp150|hewlett packard Model 150,
- OTbs, use=hp2622,
+ bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, rev=\E[7m,
+ rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m,
-# HP 2382a terminals, "the little ones." They don't have any
-# alternate character set support and sending out ^N/^O will
-# leave the screen blank.
-hp2382a|hp2382|hewlett packard 2382a,
- da, db,
- lh#1, lm#48,
- acsc@,
- pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
- rmacs@,
- sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
- sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
+# The codes supported by the term.el terminal emulation in GNU Emacs 22.2
+eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
+ am, mir, msgr, xenl,
+ colors#8, cols#80, lines#24, pairs#64,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kbs=^?,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
+ ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
+ sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
+ sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?
+ %p7%t;8%;m,
+ sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ u6=\E[%i%d;%dR, u7=\E[6n,
-hp2621-a|hp2621a-a|hp2621 with fn as arrows,
- use=hp+pfk+arrows, use=hp2621-fl,
+# shell.el can "do" color, though not nearly as well.
+#
+# seen here:
+# http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
+#
+# and
+# https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
+# https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
+# https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
+#
+# however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
+# frequently. The contemporaneous term.el aka ansi-term does not "support"
+# italics but does not lose the color information -TD 2017/01/28.
+dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
+ am, hc,
+ colors#8, it#8, ncv#13, pairs#64,
+ bold=\E[1m, cud1=\n, ht=^I, ind=\n, op=\E[39;49m,
+ rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr0=\E[m, smul=\E[4m, use=ecma+italics,
-# newer hewlett packard terminals
+#### Screen
-newhpkeyboard|generic entry for HP extended keyboard,
- kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
- kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
- kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
- use=hp+pfk-cr,
+# Entries for use by the `screen' program by Juergen Weigert,
+# Michael Schroeder, Oliver Laumann. The screen and
+# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
+# come from University of Wisconsin and may be older.
+# (screen: added <cnorm> on ANSI model -- esr)
+#
+# 'screen' defines extensions to termcap. Some are used in its terminal
+# description:
+# G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
+# AX (bool) Does understand ANSI set default fg/bg color
+# (\E[39m / \E[49m).
+# S0 (str) Switch charset 'G0' to the specified charset.
+# E0 (str) Switch charset 'G0' back to standard charset.
+#
+# Initially tested with screen 3.09.08
+#
+# According to its manual page
+#
+# Screen is a full-screen window manager that multiplexes a physical
+# terminal between several processes (typically interactive shells). Each
+# virtual terminal provides the functions of a DEC VT100 terminal and, in
+# addition, several control functions from the ISO 6429 (ECMA 48, ANSI
+# X3.64) and ISO 2022 standards (e.g. insert/delete line and support for
+# multiple character sets).
+#
+# However, there is a design error in its support for video highlights. The
+# program uses a table (rendlist) which equates the SGR codes to terminal
+# capabilities. That, and color-decoding are hardcoded in screen; its behavior
+# is modified only by the presence or absence of the corresponding capabilities.
+# Not by their values.
+#
+# If screen sets the TERMCAP variable, it uses hardcoded strings which
+# correspond to the rendlist table.
+#
+# The table gives this information:
+#
+# SGR capability
+# --- ---------
+# 1 bold
+# 2 dim
+# 3 standout
+# 4 underline
+# 5 blink
+# - (unused 6)
+# 7 reverse
+# - (unused 8-21)
+# 22 reset bold, standout and dim
+# 23 reset standout
+# 24 reset underline
+# 25 reset blink
+# - (unused 26)
+# 27 reset reverse
+#
+# ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
+# ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
+# Without some redesign of screen, it is not possible to extend the set of
+# capabilities. Substitution would be possible, e.g., sending italics in
+# place of underline.
+#
+# Because screen uses hard-coded parsing, it does not check if two capabilities
+# use the same value. For example, changing standout to be the same as any of
+# the other capabilities will confuse screen. Curses applications which use
+# sgr are not impacted (because that usually resets all capabilities before
+# setting any), but termcap applications do not use sgr -TD
+#
+# The "screen" entry should use ecma+index rather than just indn, but tmux
+# defaults to using "screen". For background, screen supported ecma+index
+# since 1994 (i.e., screen 3.0.5), stating that it was an obscure code used by
+# the (Siemens Nixdorf) 97801 terminal. It was not shown in the termcap or
+# terminfo entries (which list about 60% of the control sequences).
+screen|VT 100/ANSI X3.64 virtual terminal,
+ OTbs, OTpt, am, km, mir, msgr, xenl, G0,
+ colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
+ cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\Eg, home=\E[H, hpa=\E[%i%p1%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\n, indn=\E[%p1%dS, is2=\E)0, kbs=^H, kcbt=\E[Z,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+ nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m,
+ rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;
+ 5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=,
+ smso=\E[3m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
+ E0=\E(B, S0=\E(%p1%c, use=xterm+alt1049, use=ecma+color,
+ use=vt100+enq,
+# The bce and status-line entries are from screen 3.9.13 (and require some
+# changes to .screenrc).
+screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
+ bce,
+ ech@, use=screen4,
+screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
+ dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen4,
-newhp|generic entry for new hewlett packard terminals,
- am, bw, mir, xhp, xon,
- cols#80, lines#24, pb#4800,
- acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
- bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
- cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
- dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
- invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
- pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
- pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
- pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
- rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
- sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
- sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
- tbc=\E3, use=newhpkeyboard,
+# ======================================================================
+# Entries for GNU Screen with 16 colors.
+# Those variations permit to benefit from 16 colors palette, and from
+# bold font and blink attribute separated from bright colors. But they
+# are less portable than the generic "screen" 8 color entries: Their
+# usage makes real sense only if the terminals you attach and reattach
+# do all support 16 color palette.
-memhp|memory relative addressing for new HP ttys,
- vt#6,
- clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
- cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
- home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
- mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
+screen-16color|GNU Screen with 16 colors,
+ use=ibm+16color, use=screen4,
-scrhp|screen relative addressing for new HP ttys,
- clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
- cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
- cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
- home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
- mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
+screen-16color-s|GNU Screen with 16 colors and status line,
+ use=ibm+16color, use=screen-s,
-# (hp+labels: added label values from a BRL termcap -- esr)
-hp+labels|"standard" label info for new HP ttys,
- lh#2, lw#8, nlab#8,
- lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
- pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
- rmln=\E&j@, smln=\E&jB,
+screen-16color-bce|GNU Screen with 16 colors and BCE,
+ use=ibm+16color, use=screen-bce,
-hp+printer|"standard" printer info for HP ttys,
- ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
+screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
+ bce, use=ibm+16color, use=screen-s,
+# ======================================================================
+# Entries for GNU Screen 4.02 with --enable-colors256.
-# The new hp2621b is kind of a cross between the old 2621 and the
-# new 262x series of machines. It has dip-switched options.
-# The firmware has a bug in it such that if you give it a null
-# length label, the following character is eaten!
-hp2621b|hp 2621b with old style keyboard,
- lh#1, lm#48, lw#8, nlab#8,
- kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
- kind=\ET, kll=\EF, kri=\ES,
- pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
- smln=\E&jB, use=hp2621,
+screen-256color|GNU Screen with 256 colors,
+ use=xterm+256setaf, use=screen4,
-hp2621b-p|hp 2621b with printer,
- use=hp+printer, use=hp2621b,
+screen-256color-s|GNU Screen with 256 colors and status line,
+ use=xterm+256setaf, use=screen-s,
-# hp2621b - new 2621b with new extended keyboard
-# these are closer to the new 26xx series than the other 2621b
-hp2621b-kx|hp 2621b with extended keyboard,
- use=newhpkeyboard, use=hp2621b,
+screen-256color-bce|GNU Screen with 256 colors and BCE,
+ bce, use=xterm+256setaf, use=screen-bce,
-hp2621b-kx-p|hp 2621b with new keyboard & printer,
- use=hp+printer, use=hp2621b-kx,
+screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
+ bce, use=xterm+256setaf, use=screen-s,
-# Some assumptions are made in the following entries.
-# These settings are NOT set up by the initialization strings.
-#
-# Port Configuration
-# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
-#
-# Terminal Configuration
-# InhHndShk(G)=Yes InhDC2(H)=Yes
-# XmitFnctn(A)=No InhEolWrp=No
-#
-#
-# Hp 2622a & hp2623a display and graphics terminals
-#
-hp2622|hp2622a|hp 2622,
- da, db,
- lm#0, pb#19200,
- is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
+screen.xterm-256color|GNU Screen with xterm using 256 colors,
+ use=xterm+256setaf, use=screen.xterm-new,
-# The 2623 is a 2622 with extra graphics hardware.
-hp2623|hp2623a|hp 2623,
- use=hp2622,
+screen.konsole-256color|GNU Screen with konsole using 256 colors,
+ use=xterm+256setaf, use=screen.konsole,
-hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
- use=hp+printer, use=hp2624,
+screen.vte-256color|GNU Screen with vte using 256 colors,
+ use=xterm+256setaf, use=screen.vte,
-# The hewlett packard B can have an optional extra 6 pages of memory.
-hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
- lm#240, use=hp2624,
+screen.putty-256color|GNU Screen with putty using 256 colors,
+ use=xterm+256setaf, use=screen.putty,
-hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
- lm#240, use=hp2624b-p,
+screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
+ use=xterm+256setaf, use=screen.mlterm,
-# Color manipulations for HP terminals
-hp+color|hp with colors,
- ccc,
- colors#16, ncv#17, pairs#7,
- initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
- oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
- op=\E&v0S, scp=\E&v%p1%dS,
+# ======================================================================
-# <is2> sets the screen to be 80 columns wide
-hp2397a|hp2397|hewlett packard 2397A color terminal,
- is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
+# Read the fine manpage:
+# When screen tries to figure out a terminal name for
+# itself, it first looks for an entry named "screen.<term>",
+# where <term> is the contents of your $TERM variable. If
+# no such entry exists, screen tries "screen" (or "screen-w"
+# if the terminal is wide (132 cols or more)). If even this
+# entry cannot be found, "vt100" is used as a substitute.
+#
+# Notwithstanding the manpage, screen uses its own notion of the termcap
+# and some keys from "screen.<term>" are ignored. Here is an entry which
+# covers those (tested with screen 4.00.02) -TD
+screen+fkeys|function-keys according to screen,
+ kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
+ khome=\E[1~, kslt@,
-# HP 700/44 Setup parameters:
-# Terminal Mode HP-PCterm
-# Inhibit Auto Wrap NO
-# Status Line Host Writable
-# PC Character Set YES
-# Twenty-Five Line Mode YES
-# XON/XOFF @128 or 64 (sc)
-# Keycode Mode NO or YES (sc)
-# Backspace Key BS or BS/DEL
+# See explanation before "screen" entry. Cancel italics so that applications
+# do not assume screen supports the feature. Add this tweak to entries which
+# extend screen for terminals which do support italics.
+screen+italics|screen cannot support italics,
+ ritm@, sitm@,
#
-# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
-# \E\\? does not turn off keycode mode
-# <smsc> sets alternate start/stop; keycode on
-hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
- am, eo, xenl, xon,
- cols#80, lines#25,
- acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
- bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
- cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
- ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
- ind=^J,
- is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
- kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
- kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
- kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
- kpp=\E[5~, rmam=\E[?7l,
- rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
- rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
- smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
- smul=\E[4m, xoffc=g, xonc=e,
+# Here are a few customized entries which are useful -TD
#
-# (hp2392: copied <rmir> here from hpex -- esr)
-hp2392|239x series,
- cols#80,
- cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
- kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
- kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
- rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
- use=hpsub,
-
-hpsub|hp terminals -- capability subset,
- am, da, db, mir, xhp, xon,
- lines#24,
- bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
- cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
- ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
- is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
- sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
-
-# hpex:
-# May be used for most 24 x 80 hp terminals,
-# but has no padding added, so may allow runover in some terminals at high
-# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
-# hp98x5 terminal emulators or hp98x6 consoles.
-# Adds xy-cursor addressing, vertical cursor addressing, home,
-# last line, and underline capabilities.
+# Notes:
+# (a) screen does not support invis.
+# (b) screen's implementation of bw is incorrect according to tack.
+# (c) screen appears to hardcode the strings for khome/kend, making it
+# necessary to override the "use=" clause's values (screen+fkeys).
+# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry,
+# which is NOT the same as the terminfo screen.<term>.
+# (e) when screen finds one of these customized entries, it sets $TERM to
+# match. Hence, no "screen.xterm" entry is provided, since that would
+# create heartburn for people running remote xterm's.
+# (f) screen does not support rep.
#
-# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
-# moved <rmir> here from hpsub -- esr)
-hpex|hp extended capabilites,
- cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
- kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
- smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
+# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV
+# since the default translations override the built-in keycode
+# translation. They are suppressed here to show what is tested by tack.
+screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
+ bce@, bw,
+ invis@, kIC@, kNXT@, kPRV@, meml@, memu@, rep@,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|
+ %t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
+ E3@, use=screen+italics, use=screen+fkeys,
+ use=xterm+x11mouse, use=xterm-new,
+#:screen.xterm|screen for modern xterm,
+#: use=screen.xterm-new,
+# xterm-r6 does not really support khome/kend unless it is propped up by
+# the translations resource.
+screen.xterm-r6|screen customized for X11R6 xterm,
+ bw, use=xterm+x11mouse, use=screen+fkeys, use=xterm-r6,
+# Color applications running in screen and TeraTerm do not play well together
+# on Solaris because Sun's curses implementation gets confused.
+screen.teraterm|disable ncv in teraterm,
+ ncv#127,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
+ \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
+ \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ use=screen+fkeys, use=xterm+x11mouse, use=screen4,
+# Other terminals
+screen.rxvt|screen in rxvt,
+ bw, XT,
+ cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
+ use=rxvt+pcfkeys, use=xterm+x11mouse, use=vt220+keypad,
+ use=screen4,
+screen.Eterm|screen in Eterm,
+ use=xterm+x11mouse, use=screen+fkeys, use=Eterm,
+screen.mrxvt|screen in mrxvt,
+ use=xterm+x11mouse, use=screen+fkeys, use=mrxvt,
+screen.vte|screen in any VTE-based terminal,
+ use=xterm+x11mouse, use=screen+italics,
+ use=screen+fkeys, use=vte,
+screen.gnome|screen in GNOME Terminal,
+ use=xterm+x11mouse, use=screen+italics,
+ use=screen+fkeys, use=gnome,
+screen.konsole|screen in KDE console window,
+ use=xterm+x11mouse, use=screen+italics,
+ use=screen+fkeys, use=konsole,
+# fix the backspace key
+screen.linux|screen.linux-s|screen in linux console,
+ bw,
+ kbs=^?, kcbt@, use=linux+sfkeys, use=xterm+x11mouse,
+ use=screen+fkeys, use=screen4,
+screen.mlterm|screen in mlterm,
+ use=xterm+x11mouse, use=screen+fkeys, use=mlterm,
+screen.putty|screen in putty,
+ use=xterm+x11mouse, use=screen+fkeys, use=putty,
-# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
-hp2|hpex2|hewlett-packard extended capabilities newer version,
- am, da, db, mir, xhp,
- cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
- bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
- cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
- dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
- il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
- kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
- ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
- kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
- kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
- krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
- pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
- pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
- pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
- pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
- rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
- sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
- sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
- smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+# The default "screen" entry is reasonably portable, but not optimal for the
+# most widely-used terminal emulators. The "bce" capability is supported in
+# screen since 3.9.13, and when used, will require fewer characters to be sent
+# to the terminal for updates.
+#
+# If you are using only terminals which support bce, then you can use this
+# feature in your screen configuration.
+#
+# Adding these lines to your ".screenrc" file will allow using these customized
+# entries:
+# term screen-bce
+# bce on
+# defbce on
+screen-bce.xterm-new|screen optimized for modern xterm,
+ bce,
+ ech@, use=screen+italics, use=screen.xterm-new,
+screen-bce.rxvt|screen optimized for rxvt,
+ bce,
+ ech@, use=screen.rxvt,
+screen-bce.Eterm|screen optimized for Eterm,
+ bce,
+ ech@, use=screen.Eterm,
+screen-bce.mrxvt|screen optimized for mrxvt,
+ bce,
+ ech@, use=screen.mrxvt,
+screen-bce.gnome|screen optimized for GNOME-Terminal,
+ bce,
+ ech@, use=screen+italics, use=screen.gnome,
+screen-bce.konsole|screen optimized for KDE console window,
+ bce,
+ ech@, use=screen+italics, use=screen.konsole,
+screen-bce.linux|screen optimized for linux console,
+ bce,
+ ech@, use=screen.linux,
-# HP 236 console
-# From: <ddavis@ic.berkeley.edu>
-hp236|hp236 internal terminal emulator,
- OTbs, am,
- cols#80, lines#24,
- clear=\EF, cnorm=\EDE, cub1=^H,
- cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
- dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
- sgr0=\ECI, smso=\EBI,
+screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
+ cols#132, use=screen4,
-# This works on a hp300 console running Utah 4.3 BSD
-# From: Craig Leres <leres@okeeffe.berkeley.edu>
-hp300h|HP Catseye console,
- OTbs, am, da, db, mir, xhp,
- cols#128, lines#51, lm#0, xmc#0,
- bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
- cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
- dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
- if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
- kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
- rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
- smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
- vpa=\E&a%p1%dY,
-# From: Greg Couch <gregc@ernie.berkeley.edu>
-hp9837|hp98720|hp98721|HP 9000/300 workstations,
- OTbs, am, da, db, mir, xhp,
- cols#128, it#8, lines#46, lm#0,
- bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
- cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
- dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
- il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
- kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
- ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
- kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
- sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
- tbc=\E3, vpa=\E&a%p1%dY,
-# HP 9845 desktop computer from BRL
-# (hp9845: removed unknown capability :gu: -- esr)
-hp9845|HP 9845,
- OTbs, am, da, db, eo, mir, xhp,
- cols#80, lines#21,
- OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
- cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
- ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
- rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
-# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
-# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
-# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
-hp98550|hp98550a|HP 9000 Series 300 color console,
- OTbs, am, da, db, mir, xhp,
- cols#128, it#8, lines#49, lm#0,
- acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
- clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
- dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
- if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
- kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
- kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
- khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
- knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
- rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
- sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
- smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
-# From: Victor Duchovni <vic@fine.princeton.edu>
-# (hp700-wy: removed obsolete ":nl=^J:";
-# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
-hp700-wy|HP700/41 emulating wyse30,
- OTbs, am, bw, mir, msgr,
- cols#80, it#8, lines#24, xmc#1,
- cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
- if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
- is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
- kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
- kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
- ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
- sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
- smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
-hp70092|hp70092a|hp70092A|HP 700/92,
- am, da, db, xhp,
- cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
- acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
- bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
- cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
- dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
- hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
- kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
- ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
- kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
- kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
- krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
- rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
- sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
- smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+screen2|old VT 100/ANSI X3.64 virtual terminal,
+ cols#80, it#8, lines#24,
+ cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
+ il1=\E[L, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
+ kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
+ nel=\r\n, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
+ rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
+ smso=\E[3m, smul=\E[4m, tbc=\E[3g,
+# (screen3: removed unknown ":xv:LP:G0:" -- esr)
+screen3|older VT 100/ANSI X3.64 virtual terminal,
+ km, mir, msgr,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E)0, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
+ rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
+ sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
+ smul=\E[4m, tbc=\E[3g,
-bobcat|sbobcat|HP 9000 model 300 console,
- am, da, db, mir, xhp,
- cols#128, it#8, lines#47, xmc#0,
- cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
- cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
- dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
- il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
- rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
- smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
-gator-t|HP 9000 model 237 emulating extra-tall AAA,
- lines#94, use=gator,
-gator|HP 9000 model 237 emulating AAA,
- bw, km, mir, ul,
- cols#128, it#8, lines#47,
- bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
- dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
- dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
- ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
- il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
- rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
- rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
-gator-52|HP 9000 model 237 emulating VT52,
- cols#128, lines#47, use=vt52,
-gator-52t|HP 9000 model 237 emulating extra-tall VT52,
- lines#94, use=gator-52,
+# screen 4.0 was released 2003-07-21, and as of March 2019, its terminfo file
+# was last updated in 2009 to include 256-color support. The most recent
+# release is 4.6.2 (October 2017).
+screen4|VT 100/ANSI X3.64 virtual terminal,
+ use=ecma+index, use=screen,
+
+# As of March 2019, screen 5.0 has not been released.
+#
+# However,
+#
+# https://savannah.gnu.org/bugs/?36676
+#
+# mentions a change to implement italics which should be in a version 5,
+# (implemented 2016-11-05, but merged 2017-07-09). That does away with the
+# longstanding use of SGR 3 for standout, and interprets it as italics.
+#
+# The same development branch has some support for direct-colors, but none
+# of this has been documented.
+screen5|VT 100/ANSI X3.64 virtual terminal (someday),
+ rmso=\E[27m,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;m%?%p9%t\016%e\017%;,
+ smso=\E[7m, use=ecma+italics, use=screen4,
+
+#### Tmux
+
+# tmux is mostly compatible with screen, but has support for italics, and some
+# of the xterm cursor bits.
+#
+# However, unlike screen, tmux has no provision for using derived terminal
+# descriptions. When screen starts, it looks for a suitable "inner" terminal
+# such as "screen.$TERM" to correspond to the outer terminal's quirks. The
+# various entries such as screen.xterm-new provide a way to more closely
+# match the terminal.
+tmux|tmux terminal multiplexer,
+ invis=\E[8m, kbs=^?, rmso=\E[27m,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ smso=\E[7m, E3=\E[3J, Smulx=\E[4\:%p1%dm,
+ use=ecma+italics, use=ecma+strikeout, use=xterm+edit,
+ use=xterm+pcfkeys, use=xterm+sl, use=xterm+tmux,
+ use=screen,
+
+tmux-256color|tmux with 256 colors,
+ use=xterm+256setaf, use=tmux,
+
+tmux-direct|tmux with direct-color indexing,
+ setal=\E[%?%p1%{8}%<%t5%p1%d%e58\:2\:\:%p1%{65536}%/%d\:%p1
+ %{256}%/%{255}%&%d\:%p1%{255}%&%d%;m,
+ use=xterm+direct, use=tmux,
+
+#### Dvtm
+
+# dvtwm 0.15
+# http://www.brain-dump.org/projects/dvtm/
+#
+# + This uses ncurses to manage the display, including support for italics and
+# default-colors.
+# + However, default-colors are incomplete: do not set bce.
+# + It does not implement flash (since no \e[?5h)
+# + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
+# Oddly enough, if $TERM contains "linux", it attempts to set the title.
+# + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
+# + The built-in table of function-keys (based on rxvt) is incomplete (ends
+# with kf22).
+# + It also omits the shifted cursor- and editing-keypad keys.
+# However, it is confused by xterm's shifted cursor- and editing-keypad keys
+# (and passes those through without interpretation)
+# and may simply pass-through rxvt's, making it appear to work.
+# In other cases such as kf23 and up, no pass-through is done.
+# + Most of the mode-settings in the initialization/reset strings are not
+# implemented; dvtm copies its description from rxvt.
+dvtm|dynamic virtual terminal manager,
+ am, eo, mir, msgr, xenl, AX,
+ colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ is1=\E[?47l\E=\E[?1l,
+ is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
+ kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
+ kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
+ kb2=\EOu, kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
+ kel=\E[8\^, kend=\E[8~, kent=\EOM, kf0=\E[21~, kf1=\E[11~,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
+ kf21=\E[23$, kf22=\E[24$, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a,
+ kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[b, kslt=\E[4~,
+ op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[27m,
+ rmul=\E[24m,
+ rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+ rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
+ 25h,
+ s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
+ %p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
+ use=vt220+cvis, use=ecma+italics,
+
+dvtm-256color|dynamic virtual terminal manager with 256 colors,
+ colors#0x100, pairs#0x10000,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
+ 5;%p1%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
+ ;%p1%d%;m,
+ use=dvtm,
+
+#### NCSA Telnet
-#### Honeywell-Bull
+# Francesco Potorti <F.Potorti@cnuce.cnr.it>:
+# NCSA telnet is one of the most used telnet clients for the Macintosh. It has
+# been maintained until recently by the National Center for Supercomputer
+# Applications, and it is feature rich, stable and free. It can be downloaded
+# from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
+# xterm+sl, and the docs at NCSA. It works well.
#
-# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
+# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
+# The terminal options should be set as follows:
+# Xterm sequences ON
+# use VT wrap mode ON
+# use Emacs arrow keys OFF
+# CTRL-COMND is Emacs meta ON
+# 8 bit mode ON
+# answerback string: "ncsa-vt220-8"
+# setup keys: all disabled
#
-
-# Honeywell Bull terminal. Its cursor and function keys send single
-# control characters and it has standout/underline glitch. Most programs
-# do not like these features/bugs. Visual bell is realized by flashing the
-# "keyboard locked" LED.
-dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
- cols#80, lines#25,
- clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
- cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
- flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
- kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
-dku7003|Honeywell Bull DKU 7003 all features described,
- msgr,
- xmc#1,
- blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
- rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
- use=dku7003-dumb,
-
-#### Lear-Siegler (adm)
+# Application mode is not used.
#
-# These guys are long since out of the terminals business, but
-# in 1995 many current terminals still have an adm type as one of their
-# emulations (usually their stupidest, and usually labeled adm3, though
-# these `adm3' emulations normally have adm3a+ capabilities).
+# Other special mappings:
+# Apple VT220
+# HELP Find
+# HOME Insert here
+# PAGEUP Remove
+# DEL Select
+# END Prev Screen
+# PAGEDOWN Next Screen
#
-# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
-# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
-# was being held to ground would trigger a send of the top line on the screen.
-# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
-# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
-# for clearing up this point.)
-
-adm1a|adm1|lsi adm1a,
- am,
- cols#80, lines#24,
- bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
- ind=^J,
-adm2|lsi adm2,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
- kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
-# (adm3: removed obsolete ":ma=^K^P:" -- esr)
-adm3|lsi adm3,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
-# The following ADM-3A switch settings are assumed for normal operation:
-# SPACE U/L_DISP CLR_SCRN 24_LINE
-# CUR_CTL LC_EN AUTO_NL FDX
-# Other switches may be set for operator convenience or communication
-# requirements. I recommend
-# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
-# ETX_OFF EOT_OFF
-# Most of these terminals required an option ROM to support lower case display.
-# Open the case and look at the motherboard; if you see an open 24-pin DIP
-# socket, you may be out of luck.
+# Though it supports ANSI color, NCSA Telnet uses color to represent blinking
+# text.
#
-# (adm3a: some capabilities merged in from BRl entry -- esr)
-adm3a|lsi adm3a,
- OTbs, am,
- cols#80, lines#24,
- OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
- cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
- kcuu1=^K, rs2=^N,
-adm3a+|adm3a plus,
- kbs=^H, use=adm3a,
-# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
-adm5|lsi adm5,
- xmc#1,
- bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
- rmso=\EG, smso=\EG, use=adm3a+,
-# A lot of terminals other than adm11s use these. Wherever you see
-# use=adm+sgr with some of its capabilities disabled, try the
-# disabled ones. They may well work but not have been documented or
-# expressed in the using entry. We'd like to cook up an <sgr> but the
-# <rmacs>/<smacs> sequences of the using entries vary too much.
-adm+sgr|adm style highlight capabilities,
- invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
- smso=\EG4, smul=\EG8,
-# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
-# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
-# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
-# be ^Z, according to his entry.
-# (adm11: <smul>=\EG4 was obviously erroneous because it also said
-# <rev>=\EG4. Looking at other ADMs confirms this -- esr)
-adm11|LSI ADM-11,
- OTbs, am, hs,
- OTkn#8, cols#80, lines#24,
- OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
- cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
- kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
- kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
- kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
- use=adm+sgr,
-# From: Andrew Scott Beals <bandy@lll-crg.ARPA>
-# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
-# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
-# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
-# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
-# via BRL. That entry asserted <xmc#1>, but I've left that out because
-# neither earlier nor later ADMSs have it -- esr)
-#
-# You will need to get into the supervisor setup before you can set
-# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
-# see a lot more setup options.
-#
-# While in supervisor setup you can also use following codes:
-#
-# Ctrl-P Personality character selections (configure for example what
-# arrow keys send, if I recall correctly)
-# Ctrl-T tabs 1-80 use left&right to move and up to set and
-# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
-# Ctrl-B Binary setup (probably not needed. I think that everything can
-# be set using normal setup)
-# Ctrl-A Answerback mode (enter answerback message)
-# Ctrl-U User friendly mode (normal setup)
-# Ctrl-D Defaults entire setup and function keys from EPROM tables
-# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
-# Ctrl-R Reads both setup and functions keys from NVM.
-# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
-#
-# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
-# RTS/CTS used nowadays with virtually every modem and computer. 19200
-# bps works fine with hardware flow control.
+# The status-line manipulation is a mapping of the xterm-compatible control
+# sequences for setting the window-title. So you must use tsl and fsl in
+# pairs, since the latter ends the string that is loaded to the window-title.
+ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
+ am, km, mir, msgr, xenl,
+ acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, enacs=\E)0,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
+ il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
+ is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
+ kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
+ kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
+ kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
+ khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
+ rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
+ rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m,
+ rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?
+ %p9%t\E(0%e\E(B%;,
+ sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
+ smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ u8=\E[?62;1;6c, use=vt220+cvis, use=xterm+sl,
+ use=ansi+enq,
+ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
+ use=ncsa-m, use=klone+color,
+ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
+ hs@,
+ dsl@, fsl@, tsl@, use=ncsa,
+ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
+ hs@,
+ dsl@, fsl@, tsl@, use=ncsa-m,
+# alternate -TD:
+# The documented function-key mapping refers to the Apple Extended Keyboard
+# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
+# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
+# some keyboards and many applications require these as F1-F4.
#
-# The following null-modem cable should fix this and enable you to use
-# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
-# set ADM-12+ for DTR handshaking from supervisor setup.
+ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
+ kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
+ kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, use=ncsa,
+
+#### Pilot Pro Palm-Top
#
-# PC Serial ADM-12+
-# -------- -------
-# 2 - 3
-# 3 - 2
-# 4 - 5
-# 5 - 20
-# 6,8 - 4
-# 7 - 7
-# 20 - 6,8
+# Termcap for Top Gun Telnet and SSH on the Palm Pilot.
+# https://web.archive.org/web/20051103015726/http://www.ai/~iang/TGssh/
+pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
+ OTbs, am, xenl,
+ cols#39, lines#16,
+ bel=^G, clear=\Ec, cr=\r, cub1=^H, cud1=\n,
+ cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
+ ind=\n, kbs=^H, kcub1=^H, kcud1=\n, knp=^L, kpp=^K, nel=\Em~\s,
+ rmso=\EB, smso=\Eb,
+
+# From: Federico Bianchi <bianchi@www.arte.unipi.it>
+# These entries are for the Embeddable Linux Kernel System (ELKS)
+# project - an heavily stripped down Linux to be run on 16 bit
+# boxes or, eventually, to be used in embedded systems - and have been
+# adapted from the stock ELKS termcap. The project itself looks stalled,
+# and the latest improvements I know of date back to March 2000.
#
-adm12|lsi adm12,
- OTbs, OTpt, am, mir,
- OTug#1, cols#80, it#8, lines#24,
- bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
- is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
- kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
- kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
- kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
- use=adm+sgr,
-# (adm20: removed obsolete ":kn#7:" -- esr)
-adm20|lear siegler adm20,
- OTbs, am,
- cols#80, it#8, lines#24,
- bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
- cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
- kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
- sgr0=\E(, smso=\E),
-adm21|lear siegler adm21,
- xmc#1,
- bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
- ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
- kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
- use=adm3a,
-# (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
-# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
-# removed bogus-looking \200 from before <cup>. -- esr)
-adm22|lsi adm22,
+# To cope with the ELKS dumb console I added an "elks-glasstty" entry;
+# as an added bonus, this deals with all the capabilities common to
+# both VT52 and ANSI (or, eventually, "special") modes.
+
+elks-glasstty|ELKS glass-TTY capabilities,
OTbs, am,
- cols#80, lines#24,
- bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
- is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
- kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
- kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
- kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
- lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
-# ADM 31 DIP Switches
-#
-# This information comes from two versions of the manual for the
-# Lear-Siegler ADM 31.
-#
-# Main board:
-# rear of case
-# +-||||-------------------------------------+
-# + S1S2 ||S +
-# + ||3 +
-# + +
-# + ||S +
-# + ||4 +
-# + +
-# + +
-# + +
-# + +
-# + +
-# +-+ +-+
-# + +
-# + S5 S6 S7 +
-# + == == == +
-# +----------------------------------------------+
-# front of case (keyboard)
-#
-# S1 - Data Rate - Modem
-# S2 - Data Rate - Printer
-# ------------------------
-# Data Rate Setting
-# -------------------
-# 50 0 0 0 0
-# 75 1 0 0 0
-# 110 0 1 0 0
-# 134.5 1 1 0 0
-# 150 0 0 1 0
-# 300 1 0 1 0
-# 600 0 1 1 0
-# 1200 1 1 1 0
-# 1800 0 0 0 1
-# 2000 1 0 0 1
-# 2400 0 1 0 1
-# 3600 1 1 0 1
-# 4800 0 0 1 1
-# 7200 1 0 1 1
-# 9600 0 1 1 1
-# x 1 1 1 1
+ cols#80, it#8, lines#25,
+ bel=^G, cr=\r, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
+ nel=\r\n,
+
+elks-vt52|ELKS vt52 console,
+ clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK,
+ home=\EH, use=elks-glasstty,
+
+elks-ansi|ELKS ANSI console,
+ clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
+ rmso=\E[m, smso=\E[7m, use=elks-glasstty,
+
+# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation
+# instead of VT52, but the "elks" entry still refers to the latter.
+
+elks|default ELKS console,
+ use=elks-vt52,
+
+# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS
+# one but in screen size
+
+sibo|ELKS SIBO console,
+ cols#61, it#8, lines#20, use=elks-vt52,
+
+######## COMMERCIAL WORKSTATION CONSOLES
#
-# S3 - Interface/Printer/Attributes
-# ---------------------------------
-# Printer Busy Control
-# sw1 sw2 sw3
-# ---------------
-# off off off Busy not active, CD disabled
-# off off on Busy not active, CD enabled
-# off on off Busy active on J5-20, CD disabled
-# on off off Busy active on J5-19, CD disabled - Factory Set.
-# on off on Busy active on J5-19, CD enabled
+
+#### Alpha consoles
#
-# sw4 Used in conjuction with S4 for comm interface control - Fact 0
+
+# This is from the OSF/1 Release 1.0 termcap file
+pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
+ am, xon,
+ cols#80, lines#25,
+ bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
+ nel=\r\n, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
+
+#### Sun consoles
#
-# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
+
+# :is1: resets scrolling region in case a previous user had used "tset vt100"
+oldsun|Sun Microsystems Workstation console,
+ OTbs, am, km, mir, msgr,
+ cols#80, it#8, lines#34,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
+ rmso=\E[m, sgr0=\E[m, smso=\E[7m,
+# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
+# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
+# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
+sun-il|Sun Microsystems console with working insert-line,
+ am, km, msgr,
+ cols#80, lines#34,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=^?, kend=\E[220z, kf1=\E[224z,
+ kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
+ kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
+ kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
+ kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
+ kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
+ rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
+ smso=\E[7m, u8=\E[1t, u9=\E[11t,
+# On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
+# flake out on the last line. Unfortunately, without them the terminal has no
+# way to scroll.
+sun-cgsix|sun-ss5|Sun SparcStation 5 console,
+ il@, il1@, use=sun-il,
+# If you are using an SS5, change the sun definition to use sun-ss5.
+sun|sun1|sun2|Sun Microsystems Inc. workstation console,
+ use=sun-il,
+
+sun+sl|Sun Workstation window status line,
+ hs,
+ dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
+
+# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
+sun-s|Sun Microsystems Workstation window with status line,
+ hs,
+ dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
+sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
+ hs,
+ dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
+sun-48|Sun 48-line window,
+ cols#80, lines#48, use=sun,
+sun-34|Sun 34-line window,
+ cols#80, lines#34, use=sun,
+sun-24|Sun 24-line window,
+ cols#80, lines#24, use=sun,
+sun-17|Sun 17-line window,
+ cols#80, lines#17, use=sun,
+sun-12|Sun 12-line window,
+ cols#80, lines#12, use=sun,
+sun-1|Sun 1-line window for sysline,
+ eslok, hs,
+ cols#80, lines#1,
+ dsl=^L, fsl=\E[K, tsl=\r, use=sun,
+sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
+ ich1@, rmir@, smir@, use=sun,
+sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
+ lines#35,
+ rmcup=\E[>4h, smcup=\E[>4l, use=sun,
+sun-type4|Sun Workstation console with type 4 keyboard,
+ kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
+ kcuu1=\E[215z, use=sun-il,
+
+# Most of the current references to sun-color are from users wondering why this
+# is the default on install. Details from reading the wscons manpage, adding
+# cub, etc., here (rather than in the base sun-il entry) since it is not clear
+# when those were added -TD (2005-05-28)
#
-# sw6 ON enables printer BUSY active LOW - Factory Setting
-# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
+# According to wscons manpage, color is supported only on IA systems.
+# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
+# does not list these. It also sets ncv#3, however that corresponds to
+# underline and standout.
#
-# sw7 ON - steady cursor - Factory Setting
-# OFF - blinking cursor
+# Since the documentation and terminfo do not agree, see also current code at
+# https://web.archive.org/web/20091231042744/http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
#
-# sw8 ON causes selected attribute character to be displayed
-# OFF causes SPACE to be displayed instead - Factory Setting
+# That (actually a different driver which "supports" sun-color) also supports
+# these features:
+# vpa=\E[%i%p1%dd
+# hpa=\E[%i%p1%d`
+# cbt=\E[Z
+# dim=\E[2m
+# blink=\E[5m
+# It supports bold, but not underline -TD (2009-09-19)
+sun-color|Sun Microsystems Workstation console with color support (IA systems),
+ colors#8, ncv#3, pairs#64,
+ bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
+ cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}
+ %=%t3%e%p1%d%;m,
+ sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
+ smso=\E[7m, use=sun,
+
+#### Iris consoles
#
-# S4 - Interface
-# --------------
-# Modem Interface
-# S3 S4 S4 S4 S4
-# sw4 sw1 sw2 sw3 sw4
-# ---------------------------
-# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
-# Current Loop disabled - Factory Setting
-# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
-# disabled
-# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
-# Current Loop Disabled
+
+# (wsiris: this had extension capabilities
+# :HS=\E7F2:HE=\E7F7:\
+# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
+# See the note on Iris extensions near the end of this file.
+# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
+# <flash> from BRL -- esr)
+wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
+ OTbs, OTnc, OTpt, am,
+ OTkn#3, cols#80, it#8, lines#40,
+ OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
+ cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+ cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
+ flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
+ ind=\n, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
+ kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
+ rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
+ smul=\E7R2\E9P,
+
+#### NeWS consoles
#
-# sw5 ON disables dot stretching mode - Factory Setting
-# OFF enables dot stretching mode
-# sw6 ON enables blanking function
-# OFF enables underline function - Factory Setting
-# sw7 ON causes NULLS to be displayed as NULLS
-# OFF causes NULLS to be displayed as SPACES - Factory Setting
+# Console terminal windows under the NeWS (Sun's Display Postscript windowing
+# environment). Note: these have nothing to do with Sony's News workstation
+# line.
#
-# S5 - Word Structure
-# -------------------
-# sw1 ON enables BREAK key - Factory Setting
-# OFF disables BREAK key
-# sw2 ON selects 50Hz monitor refresh rate
-# OFF selects 60Hz monitor refresh rate - Factory Setting
+
+# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
+# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
+psterm|psterm-basic|NeWS psterm-80x34,
+ OTbs, am, hs, km, ul,
+ cols#80, it#8, lines#34,
+ blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
+ cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
+ dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
+ home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
+ ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
+ sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
+ tsl=\EOl,
+psterm-96x48|NeWS psterm 96x48,
+ cols#96, lines#48, use=psterm,
+psterm-90x28|NeWS psterm 90x28,
+ cols#90, lines#28, use=psterm,
+psterm-80x24|NeWS psterm 80x24,
+ cols#80, lines#24, use=psterm,
+# This is a faster termcap for psterm. Warning: if you use this termcap,
+# some control characters you type will do strange things to the screen.
+# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
+psterm-fast|NeWS psterm fast version (flaky ctrl chars),
+ OTbs, am, hs, km, ul,
+ cols#80, it#8, lines#34,
+ blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
+ cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
+ dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
+ il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
+ rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
+ smso=^Oo, smul=^Ou, tsl=^Ol,
+
+#### NeXT consoles
#
-# Modem Port Selection
-# sw3 sw4 sw5
-# ---------------
-# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
-# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
-# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
-# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
-# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
-# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
-# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
-# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
+# Use `glasstty' for the Workspace application
#
-# sw6 ON sends bit 8 a 1 (mark)
-# OFF sends bit 8 as 0 (space) - Factory Setting
-# sw7 ON selects Block Mode
-# OFF selects Conversation Mode - Factory Setting
-# sw8 ON selects Full Duplex operation
-# OFF selects Half Duplex operation - Factory Setting
+
+# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
+next|NeXT console,
+ am, xt,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
+ ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
+ rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
+nextshell|NeXT Shell application,
+ am,
+ cols#80,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, kbs=^H, kcub1=^H,
+ kcud1=\n, nel=\r\n,
+
+#### Sony NEWS workstations
#
-# S6 - Printer
-# ------------
-# sw1, sw2, sw6, sw7 Reserved - Factory 0
+
+# (news-unk: this had :KB=news: -- esr)
+news-unk|SONY NEWS vt100 emulator common entry,
+ OTbs, OTpt, am, xenl,
+ cols#80,
+ OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
+ is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
+ kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
+ sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
#
-# Printer Port Selection
-# same as Modem above, bit 8 (when 8 DATA bits) is always = 0
+# (news-29: this had :TY=ascii: --esr)
+news-29|SONY NEWS vt100 emulator with 29 lines,
+ lines#29, use=news-unk,
+# (news-29-euc: this had :TY=euc: --esr)
+news-29-euc|SONY NEWS vt100 emulator with 29 lines and EUC,
+ use=news-29,
+# (news-29-sjis: this had :TY=sjis: --esr)
+news-29-sjis|SONY NEWS vt100 emulator with 29 lines and SJIS,
+ use=news-29,
#
-# sw8 ON enables Printer Port
-# OFF disables Printer Port - Factory Setting
+# (news-33: this had :TY=ascii: --esr)
+news-33|SONY NEWS vt100 with 33 lines,
+ lines#33, use=news-unk,
+# (news-33-euc: this had :TY=euc: --esr)
+news-33-euc|SONY NEWS vt100 with 33 lines and EUC,
+ use=news-33,
+# (news-33-sjis: this had :TY=sjis: --esr)
+news-33-sjis|SONY NEWS vt100 with 33 lines and SJIS,
+ use=news-33,
#
-# S7 - Polling Address
-# --------------------
-# sw1-7 Establish ASCII character which designates terminal polling address
-# ON = logic 0
-# OFF = logic 1 - Factory Setting
-# sw8 ON enables Polling Option
-# OFF disables Polling Option - Factory Setting
+# (news-42: this had :TY=ascii: --esr)
+news-42|SONY NEWS vt100 with 42 lines,
+ lines#42, use=news-unk,
+# (news-42-euc: this had :TY=euc: --esr)
+news-42-euc|SONY NEWS vt100 with 42 lines and EUC,
+ use=news-42,
+# (news-42-sjis: this had :TY=sjis: --esr)
+news-42-sjis|SONY NEWS vt100 with 42 lines and SJIS,
+ use=news-42,
#
+# NEWS-OS old termcap entry
#
-# On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
+# (news-old-unk: this had :KB=news:TY=sjis: --esr)
+news-old-unk|SONY NEWS vt100 emulator common entry,
+ OTbs, OTpt, am, xenl,
+ cols#80, vt#3,
+ OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
+ rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
#
-# This adm31 entry uses underline as the standout mode.
-# If the adm31 gives you trouble with standout mode, check the DIP switch in
-# position 6, bank @c11, 25% from back end of the circuit board. Should be
-# OFF. If there is no such switch, you have an old adm31 and must use oadm31.
-# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
-adm31|lsi adm31 with sw6 set for underline mode,
- OTbs, am, mir,
- cols#80, lines#24,
- bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
- kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
- kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
- kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
- rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
-adm31-old|o31|old adm31,
- rmul@, smso=\EG4, smul@, use=adm31,
-# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
-adm36|LSI ADM36,
- OTbs, OTpt,
- OTkn#4,
- if=/usr/share/tabset/vt100,
- is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
- use=vt100,
-# (adm42: removed obsolete ":ma=^K^P:" -- esr)
-adm42|lsi adm42,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
- il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
- kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
- smir=\Eq, smul@, use=adm+sgr,
-# The following termcap for the Lear Siegler ADM-42 leaves the
-# "system line" at the bottom of the screen blank (for those who
-# find it distracting otherwise)
-adm42-ns|lsi adm-42 with no system line,
- cbt=\EI\EF \011, clear=\E;\EF \011,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
- dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
- el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
- smir=\Eq\EF \011, use=adm42,
-# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
-# The insert mode of this terminal is commented out because it's broken for our
-# purposes in that it will shift the position of every character on the page,
-# not just the cursor line!
-# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
-adm1178|1178|lsi adm1178,
- am,
- cols#80, lines#24, xmc#1,
- bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
- cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
- home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
- kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
- sgr0=\E), smso=\EG4, smul=\EG1,
-
-#### Prime
+# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
+nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
+ OTbs,
+ lines#40,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
+ r\E8,
+ use=news-old-unk,
#
-# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
-# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
-# Prime merged with ComputerVision in the late 1980s; you can reach them at:
+# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
+nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
+ lines#42,
+ is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
+ use=news-old-unk,
#
-# ComputerVision Services
-# 500 Old Connecticut Path
-# Framingham, Mass.
+# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
+nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
+ OTbs,
+ lines#40,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40
+ r\E8,
+ use=news-old-unk,
#
-
-# Standout mode is dim reverse-video.
-pt100|pt200|wren|fenix|prime pt100/pt200,
- am, bw, mir, msgr,
- cols#80, it#8, lines#24,
- cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
- cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
- ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
- home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
- rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m,
- smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
- smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
-pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
- cols#132,
- cup=\E[%i%p1%d;%p2%dH, use=pt100,
-pt250|Prime PT250,
- rmso@, smso@, use=pt100,
-pt250w|Prime PT250 in 132-column mode,
- rmso@, smso@, use=pt100w,
-
-#### Qume (qvt)
+# (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
+nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
+ OTbs,
+ lines#31,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
+ r\E8,
+ use=news-old-unk,
#
-# Qume, Inc.
-# 3475-A North 1st Street
-# San Jose CA 95134
-# Vox: (800)-457-4447
-# Fax: (408)-473-1510
-# Net: josed@techsupp.wyse.com (Jose D'Oliveira)
+# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
+# also the alias vt100-bm.
+nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
+ OTbs,
+ lines#33,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33
+ r\E8,
+ use=news-old-unk,
#
-# Qume was bought by Wyse, but still (as of early 1995) has its own support
-# group and production division.
+# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
+nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
+ OTbs,
+ lines#31,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31
+ r\E8,
+ use=news-old-unk,
#
-# Discontinued Qume models:
+# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
+news28|sony vt100 emulator 28 lines,
+ OTbs,
+ lines#28,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28
+ r\E8,
+ use=news-old-unk,
#
-# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
-# built to replace them, and a qvt119+ which was a 101+ with available wide
-# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
-# and an ANSI-compatible qvt203 that replaced it. Qume started producing
-# ANSI-compatible terminals with the qvt323 and qvt61.
+# (news29: this had :TY=ascii:KB=nws1200:\ --esr)
+news29|news28-a|sony vt100 emulator 29 lines,
+ lines#29,
+ is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29
+ r\E8,
+ use=news-old-unk,
#
-# Current Qume models (as of February 1995):
+# (news511: this had :TY=sjis: --esr)
+nwp511|nwp-511|nwp-511 vt100,
+ OTbs, OTpt, am, xenl,
+ cols#80, lines#24,
+ clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
+ ed=\E[J$<30/>, el=\E[K$<3/>,
+ flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
+ il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
+ ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
+ rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
+ smso=\E[7m$<2/>, smul=\E[4m$<2/>,
+# (news517: this had :TY=sjis:. --esr)
+nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
+ eslok, hs,
+ cols#80, lines#30,
+ OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
+ is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ tsl=\E[1$}\E[;%df, use=vt220-base,
+# (news517-w: this had :TY=sjis:. --esr)
+nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
+ eslok, hs,
+ cols#132, lines#50,
+ OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
+ is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
+ tsl=\E[1$}\E[;%df, use=vt220-base,
+
+#### Common Desktop Environment
#
-# All current Qume terminals have ANSI-compatible operation modes.
-# Qume is still producing the qvt62, which features emulations for other
-# popular lines such as ADDS, and dual-host capabilities. The qvt82 is
-# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
-# with many emulations including Wyse370, Wyse 325, etc. Their newest
-# model is the qvt520, which is vt420-compatible.
+
+# This ships with Sun's CDE in Solaris 2.5
+# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
+dtterm|CDE desktop terminal,
+ am, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, lm#0, ncv@,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
+ sc=\E7,
+ sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=vt220+cvis,
+ use=ecma+color,
+
+######## Non-Unix Consoles
#
-# There are some ancient printing Qume terminals under `Daisy Wheel Printers'
+
+#### EMX termcap.dat compatibility modes
#
-# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
-# setup mode. Shift-s should be a configuration save to NVRAM.
+# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
+# no_color_video to inform the application that standout(1), underline(2)
+# reverse(4) and invisible(64) don't work with color.
+emx-base|DOS special keys,
+ bce, bw,
+ it#8, ncv#71,
+ bel=^G, use=ansi.sys,
-qvt101|qvt108|qume qvt 101 and QVT 108,
- xmc#1, use=qvt101+,
+# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
+# a Unix-style environment used on OS/2. (Note that the suffix makes some
+# names longer than 14 characters, the nominal maximum).
+#
+# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
+ansi-emx|ANSI.SYS color,
+ am, bce, eo, mir, msgr, xon,
+ colors#8, cols#80, it#8, lines#25, pairs#64,
+ bel=^G, blink=\E[5m, bold=\E[1m,
+ clear=\E[1;33;44m\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch=\E[%p1%dp, ed=\E[J, el=\E[K,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[@, ind=\n, kb2=\E[G, kbs=^H, kf0=\0D,
+ kll=\0O, kspd=^Z, nel=\r\n, rev=\E[5;37;41m, rmir=\E[4l,
+ rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
+ rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
+ smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
+ tbc=\E[3g, u8=\E[?6c, u9=\E[c, use=vt220+cvis,
+ use=emx-base,
+# nice colors for Emacs (white on blue, mode line white on cyan)
+ansi-color-2-emx|ANSI.SYS color 2,
+ clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
+ rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
+ setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
+ smul=\E[1;36;44m, use=ansi-emx,
+# nice colors for Emacs (white on black, mode line black on cyan)
+ansi-color-3-emx|ANSI.SYS color 3,
+ clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
+ rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
+ setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
+ smul=\E[0;36;40m, use=ansi-emx,
+mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
+ am,
+ cols#80, it#8, lines#24,
+ clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
+ ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
+ kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
+ kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
+ kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=\r\n, rev=\E[7m,
+ sgr0=\E[0m,
-# This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
-# file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
-# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
-# What seems to be going on here is that this entry was designed so that
-# the normal highlight is bold and standout is dim plus something else
-# (reverse-video maybe? But then, are there two <rev> sequences?)
-qvt101+|qvt101p|qume qvt 101 PLUS product,
- am, bw, hs, ul,
- cols#80, lines#24, xmc#0,
- bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
- cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
- flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
- ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
- kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
- kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
- kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
- khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
- smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
-qvt102|qume qvt 102,
- cnorm=\E., use=qvt101,
-# (qvt103: added <rmam>/<smam> based on init string -- esr)
-qvt103|qume qvt 103,
- am, xenl, xon,
- cols#80, it#8, lines#24, vt#3,
- bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
- clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C$<2>,
- cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
- cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
- hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
- kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
- rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
- rmso=\E[m$<2>, rmul=\E[m$<2>,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
- sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
- smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
-qvt103-w|qume qvt103 132 cols,
- cols#132, lines#24,
- rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
-qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
- am, hs, mir, msgr,
- cols#80, lines#24, xmc#0,
- bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
- cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
- el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
- hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
- kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
- kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
- kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
- mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
- tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
-qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
- lines#25, use=qvt119+,
-qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
- cols#132,
- is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
-qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
- lines#25, use=qvt119+,
-qvt203|qvt203+|qume qvt 203 Plus,
- dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
- ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
- kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
- kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
-qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
- cols#132, lines#24,
- rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
-#
-# Since a command is present for enabling 25 data lines,
-# a specific terminfo entry may be generated for the 203.
-# If one is desired for the QVT 119 PLUS then 25 lines must
-# be selected in the status line (setup line 9).
-#
-qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
- cols#80, lines#25,
- is2=\E[=40h\E[?3l, use=qvt203,
-qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
- cols#132, lines#25,
- rs2=\E[?3h\E[=40h, use=qvt203,
+#### Cygwin
-#### Televideo (tvi)
-#
-# TeleVideo
-# 550 East Brokaw Road
-# PO Box 49048 95161
-# San Jose CA 95112
-# Vox: (408)-954-8333
-# Fax: (408)-954-0623
-#
+# Use this for cygwin32 (tested with beta 19.1)
+# underline is colored bright magenta
+# shifted kf1-kf12 are kf11-kf22
+cygwinB19|ANSI emulation for cygwin32,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
+ kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
+ use=ansi.sys,
+
+# Use this for cygwin (tested with version 1.1.0).
+# I've combined pcansi and linux. Some values of course were different and
+# I've indicated which of these were and which I used.
+# Cheers, earnie_boyd@yahoo.com
+# several changes based on running with tack and comparing with older entry -TD
+# more changes from csw:
+# add cbt [backtab]
+# remove eo [erase overstrike with blank]
+# change clear was \E[H\E[J now \E[2J (faster?)
+# remove cols
+# remove lines
+# remove ncv#3 [colors collide with highlights, bitmask] not applicable
+# to MSDOS box?
+# add cub [cursor back param]
+# add cuf [cursor forward param]
+# add cuu [cursor up param]
+# add cud [cursor down param]
+# add hs [has status line]
+# add fsl [return from status line]
+# add tsl [go to status line]
+# add smacs [Start alt charset] (not sure if this works)
+# add rmacs [End alt charset] (ditto)
+# add smcup [enter_ca_mode] (save console; thanks Corinna)
+# add rmcup [exit_ca_mode] (restore console; thanks Corinna)
+# add kb2 [center of keypad]
+# add u8 [user string 8] \E[?6c
+# add el [clear to end of line] \E[K
+# Notes:
+# cnorm [make cursor normal] not implemented
+# flash [flash] not implemented
+# blink [blink] not implemented very usefully in cygwin? \E[5m
+# dim [dim] not implemented very usefully in cygwin? \E[2m
+# cub1 [cursor back 1] typically \E[D, but ^H is faster?
+# kNXT [shifted next key] not implemented
+# kPRV [shifted prev key] not implemented
+# khome [home key] really is \E[1~ NOT \E[H
+# tbc [clear tab stops] not implemented
+# xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
+# smpch [Start PC charset] is \E[11m, same as smacs
+# rmpch [End PC charset] is \E[10m, same as rmacs
+# mir [move in insert mode] fails in tack?
+# bce [back color erase] causes problems with change background color?
+# cvvis [make cursor very visible] causes a stackdump when testing with
+# testcurs using the output option? \E[?25h\E[?8c
+# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c
+# ech [erase characters param] broken \E[%p1%dX
+# kcbt [back-tab key] not implemented in cygwin? \E[Z
#
-# These require incredible amounts of padding.
+# 2005/11/12 -TD
+# Remove cbt since it does not work in current cygwin
+# Add 'mir' and 'in' flags based on tack
+cygwin|ANSI emulation for Cygwin,
+ am, hs, mir, msgr, xon,
+ colors#8, it#8, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
+ \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
+ \301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD,
+ cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kb2=\E[G,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
+ kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
+ nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
+ rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
+ sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
+ %t;8%;%?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
+ smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
+ vpa=\E[%i%p1%dd, use=vt102+enq,
+
+# I've supplied this so that you can help test new values and add other
+# features. Cheers, earnie_boyd@yahoo.com.
#
-# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
-# Televideo terminals are ANSI and PC-ANSI compatible.
+# Some features are from pcansi. The op value is from linux. Function-keys
+# are from linux. These have been tested not to cause problems. xenl was in
+# this list, but DOES cause problems so it has been removed
+cygwinDBG|Debug Version for Cygwin,
+ am, eo, mir, msgr, xon,
+ colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
+ \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
+ \301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ el1=\E[1K, flash=\E[?5h$<200/>\E[?5l, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m, kNXT=\E[6$,
+ kPRV=\E[5$, kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
+ kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
+ nel=\r\n, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=\E[10m, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+ rs1=\Ec\E]R, sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt220+cvis,
+ use=vt102+enq,
-tvi803|televideo 803,
- clear=\E*$<10>, use=tvi950,
+#### DJGPP
-# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
-# Switch settings are:
-#
-# S1 1 2 3 4
-# D D D D 9600
-# D D D U 50
-# D D U D 75
-# D D U U 110
-# D U D D 135
-# D U D U 150
-# D U U D 300
-# D U U U 600
-# U D D D 1200
-# U D D U 1800
-# U D U D 2400
-# U D U U 3600
-# U U D D 4800
-# U U D U 7200
-# U U U D 9600
-# U U U U 19200
-#
-# S1 5 6 7 8
-# U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
-# U D X U 7N2
-# U U D D 7O1
-# U U D U 7O2
-# U U U D 7E1
-# U U U U 7E2
-# D D X D 8N1
-# D D X U 8N2
-# D U D D 8O1
-# D U U U 8E2
+# Key definitions:
+# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the
+# encodings used by other x86 environments. All others are invented for DJGPP.
+# Oddly enough, while several combinations of modifiers are tabulated, there is
+# none for shifted cursor keys.
#
-# S1 9 Autowrap
-# U on
-# D off
+# F1 \E[[A
+# F2 \E[[B
+# F3 \E[[C
+# F4 \E[[D
+# F5 \E[[E
+# F6 \E[17~
+# F7 \E[18~
+# F8 \E[19~
+# F9 \E[20~
+# F10 \E[21~
+# F11 \E[23~
+# F12 \E[24~
#
-# S1 10 CR/LF
-# U do CR/LF when CR received
-# D do CR when CR received
+# Delete \E[3~
+# Down Arrow \E[B
+# End \E[4~
+# Home \E[1~
+# Insert \E[2~
+# Left Arrow \E[D
+# Page Down \E[6~
+# Page Up \E[5~
+# Right Arrow \E[C
+# Up Arrow \E[A
#
-# S2 1 Mode
-# U block
-# D conversational
+# Shift-F1 \E[25~
+# Shift-F2 \E[26~
+# Shift-F3 \E[27~
+# Shift-F4 \E[28~
+# Shift-F5 \E[29~
+# Shift-F6 \E[30~
+# Shift-F7 \E[31~
+# Shift-F8 \E[32~
+# Shift-F9 \E[33~
+# Shift-F10 \E[34~
+# Shift-F11 \E[35~
+# Shift-F12 \E[36~
#
-# S2 2 Duplex
-# U half
-# D full
-#
-# S2 3 Hertz
-# U 50
-# D 60
-#
-# S2 4 Edit mode
-# U local
-# D duplex
-#
-# S2 5 Cursor type
-# U underline
-# D block
-#
-# S2 6 Cursor down key
-# U send ^J
-# D send ^V
-#
-# S2 7 Screen colour
-# U green on black
-# D black on green
-#
-# S2 8 DSR status (pin 6)
-# U disconnected
-# D connected
-#
-# S2 9 DCD status (pin 8)
-# U disconnected
-# D duplex
-#
-# S2 10 DTR status (pin 20)
-# U disconnected
-# D duplex
-# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
-# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
-tvi910|televideo model 910,
- OTbs, am, msgr,
- cols#80, it#8, lines#24, xmc#1,
- bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
- home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
- if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
- kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
- kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
- kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
- vpa=\E[%p1%{32}%+%c, use=adm+sgr,
-# From: Alan R. Rogers <rogers%albany@csnet-relay>
-# as subsequently hacked over by someone at SCO
-# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
-#
-# Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
+# Ctrl-F1 \E[47~
+# Ctrl-F2 \E[48~
+# Ctrl-F3 \E[49~
+# Ctrl-F4 \E[50~
+# Ctrl-F5 \E[51~
+# Ctrl-F6 \E[52~
+# Ctrl-F7 \E[53~
+# Ctrl-F8 \E[54~
+# Ctrl-F9 \E[55~
+# Ctrl-F10 \E[56~
+# Ctrl-F11 \E[57~
+# Ctrl-F12 \E[58~
#
-# S1 1 2 3 4:
-# D D D D 9600 D D D U 50 D D U D 75 D D U U 110
-# D U D D 135 D U D U 150 D U U D 300 D U U U 600
-# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
-# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
+# Ctrl-Delete \E[43~
+# Ctrl-Down Arrow \E[38~
+# Ctrl-End \E[44~
+# Ctrl-Home \E[41~
+# Ctrl-Insert \E[42~
+# Ctrl-Left Arrow \E[39~
+# Ctrl-Page Down \E[46~
+# Ctrl-Page Up \E[45~
+# Ctrl-Right Arrow \E[40~
+# Ctrl-Up Arrow \E[37~
#
-# S1 5 6 7 8:
-# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
-# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
-# D U D D 8O1 D U U U 8E2
+# Alt-F1 \E[59~
+# Alt-F2 \E[60~
+# Alt-F3 \E[61~
+# Alt-F4 \E[62~
+# Alt-F5 \E[63~
+# Alt-F6 \E[64~
+# Alt-F7 \E[65~
+# Alt-F8 \E[66~
+# Alt-F9 \E[67~
+# Alt-F10 \E[68~
+# Alt-F11 \E[79~
+# Alt-F12 \E[80~
#
-# S1 9 Autowrap (U = on, D = off)
-# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
-# S2 1 Mode (U = block, D = conversational)
-# S2 2 Duplex (U = half, D = full)
-# S2 3 Hertz (U = 50, D = 60)
-# S2 4 Edit mode (U = local, D = duplex)
-# S2 5 Cursor type (U = underline, D = block)
-# S2 6 Cursor down key (U = send ^J, D = send ^V)
-# S2 7 Screen colour (U = green on black, D = black on green)
-# S2 8 DSR status (pin 6) (U = disconnected, D = connected)
-# S2 9 DCD status (pin 8) (U = disconnected, D = connected)
-# S2 10 DTR status (pin 20) (U = disconnected, D = connected)
+# Alt-Delete \E[65~
+# Alt-Down Arrow \E[60~
+# Alt-End \E[66~
+# Alt-Home \E[41~
+# Alt-Insert \E[64~
+# Alt-Left Arrow \E[61~
+# Alt-Page Down \E[68~
+# Alt-Page Up \E[67~
+# Alt-Right Arrow \E[62~
+# Alt-Up Arrow \E[59~
#
-tvi910+|televideo 910+,
- dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
- kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
- kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
- ll=\E=7\s, use=tvi910,
+# Also:
+# Alt-A \E[82~
+# Alt-B \E[82~
+# Alt-C \E[83~
+# Alt-D \E[84~
+# Alt-E \E[85~
+# Alt-F \E[86~
+# Alt-G \E[87~
+# Alt-H \E[88~
+# Alt-I \E[89~
+# Alt-J \E[90~
+# Alt-K \E[91~
+# Alt-L \E[92~
+# Alt-M \E[93~
+# Alt-N \E[94~
+# Alt-O \E[95~
+# Alt-P \E[96~
+# Alt-Q \E[97~
+# Alt-R \E[98~
+# Alt-S \E[99~
+# Alt-T \E[100~
+# Alt-U \E[101~
+# Alt-V \E[102~
+# Alt-W \E[103~
+# Alt-X \E[104~
+# Alt-Y \E[105~
+# Alt-Z \E[106~
+djgpp|ANSI emulation for DJGPP alpha,
+ am, bce, msgr, xhp, xon, xt,
+ colors#8, it#8, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
+ \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
+ \301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
+ clear=\E[H\E[J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, invis=\E[8m,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
+ kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=\r\n,
+ op=\E[37;40m, rev=\E[7m, ri=\E[T, rmso=\E[m,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?
+ %p6%t;1%;%?%p7%t;8%;m,
+ sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
+ use=ecma+index,
-# (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
-# <khome> from BRL entry -- esr)
-tvi912|tvi914|tvi920|old televideo 912/914/920,
- OTbs, OTpt, am, msgr,
- cols#80, it#8, lines#24, xmc#1,
- bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
- ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
- il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
- kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
- kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
- kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
- tbc=\E3,
-# We got some new tvi912c terminals that act really weird on the regular
-# termcap, so one of our gurus worked this up. Seems that cursor
-# addressing is broken.
-tvi912cc|tvi912 at cowell college,
- cup@, use=tvi912c,
+djgpp203|Entry for DJGPP 2.03,
+ OTbs, am,
+ cols#80, it#8, lines#25,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
+ kcud1=\n, nel=\r\n,
-# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
-# From: Benjamin C. W. Sittler
-#
-# Someone has put a scanned copy of the manual online at:
-# http://vt100.net/televideo/912b-om/
-#
-# These terminals were produced ca. 1979, and had a 12" monochrome
-# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
-# ASCII, and were generally similar to adm3a but with attributes
-# (including some with magic cookies), fancy half-duplex mode, and
-# different bugs.
+djgpp204|Entry for DJGPP 2.04,
+ OTbs, am, AX,
+ colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v,
+ clear=\E[H\E[2J, cnorm=\E[v, cr=\r, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=\E[S, invis=\E[8m, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
+ kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B, kf3=\E[[C,
+ kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~,
+ kpp=\E[5~, nel=\r\n, rev=\E[7m, ri=\E[T, rmso=\E[m,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
+ smso=\E[7m, smul=\E[4m, use=ecma+index,
+
+#### U/Win
+
+# This is tested using U/Win's telnet. Scrolling is omitted because it is
+# buggy. Another odd bug appears when displaying "~" in alternate character
+# set (the emulator spits out error messages). Compare with att6386 -TD
+uwin|U/Win 3.2 console,
+ am, eo, in, msgr, xenl, xon,
+ colors#8, it#8, ncv#58, pairs#64,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
+ \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
+ \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[Y,
+ kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
+ kf9=\EOX, khome=\E[H, kich1=\E[@, nel=\r\n, op=\E[39;49m,
+ rc=\E8, rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m,
+ rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
+ smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+ use=vt220+cvis,
+
+#### Microsoft (miscellaneous)
+
+# This entry fits the Windows NT console when the _POSIX_TERM environment
+# variable is set to 'on'. While the Windows NT POSIX console is seldom used,
+# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
+# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
+# systems is not, and (surprise!) they match very well.
#
-# Some operations reqire truly incredible amounts of padding. The
-# insert_line (<il1>) and delete_line (<dl1>) operations in particular
-# are so slow as to be nearly unusable.
+# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
+# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
+# are the installation instructions a pile of mind-numbing bureaucratese,
+# but the termcap entry is actually broken and unusable as given; the :do:
+# capability is misspelled "d".
#
-# There may or may not have been a separate, earlier series of 912/920
-# terminals (without the "B" and "C" suffix); I have never seen one,
-# and the manual only describes the "B" and "C" series. The 912 and 920
-# are quite distinct from the 914 and 924, which were much nicer non-
-# magic-cookie terminals similar to the 950.
+# To use this, you need to a bunch of environment variables:
#
-# This is a new description for the following TeleVideo terminals,
-# distinguished chiefly by their keyboards:
+# SET _POSIX_TERM=on
+# SET TERM=ansi
+# SET TERMCAP=location of termcap file in POSIX file format
+# which is case-sensitive.
+# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
+# SET TMP=//C/TEMP
#
-# TVI-912B - very odd layout, no function keys (84 keys)
-# TVI-920B - typewriter layout, no function keys (103 keys)
-# TVI-912C - very odd layout, function keys F1-F11 (82 keys)
-# TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
+# Important note: setting the TMP environment variable in POSIX style renders
+# it incompatible with a lot of other applications, including Visual C++. So
+# you should have a separate command window just for vi. All the other
+# variables may be permanently set in the Control Panel\System applet.
#
-# To choose a setting for the TERM variable, start with the model:
+# You can find out more about the restrictions of this facility at
+# <https://jeffpar.github.io/kbarchive/kb/108/Q108581/>
#
-# Model || base name
-# ----------||-----------
-# TVI-912B || tvi912b
-# TVI-912C || tvi912c
-# TVI-920B || tvi920b
-# TVI-920C || tvi920c
-#
-# Then add a suffix from the following table describing installed options
-# and how you'd like to use the terminal:
-#
-# Use Video | Second | Visual | Magic | Page || feature
-# Attributes | Page | Bell | Cookies | Print || suffix
-# ------------|--------|--------|---------|-------||---------
-# No | No | N/A | N/A | No || -unk
-# No | No | N/A | N/A | Yes || -p
-# No | Yes | No | N/A | No || -2p-unk
-# No | Yes | No | N/A | Yes || -2p-p
-# No | Yes | Yes | N/A | No || -vb-unk
-# No | Yes | Yes | N/A | Yes || -vb-p
-# Yes | No | N/A | No | N/A ||
-# Yes | No | N/A | Yes | N/A || -mc
-# Yes | Yes | No | No | N/A || -2p
-# Yes | Yes | No | Yes | N/A || -2p-mc
-# Yes | Yes | Yes | No | N/A || -vb
-# Yes | Yes | Yes | Yes | N/A || -vb-mc
-#
-# So e.g. a model 920 C with second page memory option, visual bell
-# and no magic cookies would be tvi920c-vb; a model 912 B without the
-# second page memory option and using magic cookies would be
-# tvi912b-mc
-#
-# PADDING
-#
-# At 9600 baud, the terminal is prone to overflow its input buffer
-# during complex operations (insert/delete
-# character/line/screen/page), and it does not signal this over the
-# RS232 cable. The typical symptom of an overrun is that the terminal
-# starts beeping, and output becomes garbled.
-#
-# The padding delays in this terminfo were derived using tack(1)
-# running on a Linux box connected to a TVI-920C with a later-model
-# (A49C1-style) ROM running at 9600 baud, so your mileage may
-# vary. The numbers below seem to give the terminal enough time so
-# that it doesn't overflow its input buffer and start losing
-# characters.
+# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
+ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
+ am, bw, msgr,
+ cols#80, it#8, lines#25,
+ bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
+ kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
+ ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
+# From: jew@venus.sunquest.com
+# Date: 19 Feb 93 23:41:07 GMT
+# Here's a combination of ansi and vt100 termcap
+# entries that works nearly perfectly for me
+# (Gateway 2000 Handbook and Microsoft Works 3.0):
+pcmw|PC running Microsoft Works,
+ am, xenl,
+ cols#80, it#8, lines#24, vt#3,
+ bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
+ clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n,
+ cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
+ cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
+ ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
+ rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
+ ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
+ tbc=\E[3g$<2/>,
+
+# From: Federico Bianchi
+# This is the entry for the OpenNT terminal.
+# The ntconsole name is for backward compatibility.
+# This is for OpenNT 2.0 and later.
+# Later OpenNT was renamed to Interix.
#
-# KEYS
+# Presently it is distributed by Microsoft as Services For Unix (SFU).
+# The 3.5 beta contained ncurses 4.2 (that is header files and executables,
+# the documentation dated from 1.9.9e) -TD
+#
+# For a US keyboard, with 12 function-kecbt=\E[Z, ys,
+# kf1-kf12 are unmodifiedcbt=\E[Z, cbt=\E[Z,
+# kf13-kf24 use the shift-key
+# kf25-kf36 use the left alt-key
+# kf37-kf38 use the control-key
+# kf49-kf60 use the shift- and control-keys
+# The shifted cursor keys send the sequences originally used for kf61-kf64:
+# down=\EF+ (kf61)
+# up=\EF- (kf62)
+# left=\EF^ (unassigned)
+# right=\EF$ (kf64)
+
+interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
+ am, bce, msgr,
+ cols#80, it#8, lines#25,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
+ \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
+ \301w\302x\263y\363z\362{\343|\330}\234~\376,
+ bel=^G, bold=\E[1m, clear=\E[2J, cr=\r, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ kLFT=\EF\^, kRIT=\EF$, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?, kend=\E[U,
+ kf0=\EFA, kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC,
+ kf13=\EFD, kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH,
+ kf18=\EFI, kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL,
+ kf22=\EFM, kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ,
+ kf27=\EFR, kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU,
+ kf31=\EFV, kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ,
+ kf36=\EFa, kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4,
+ kf40=\EFe, kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi,
+ kf45=\EFj, kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo,
+ kf5=\EF5, kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs,
+ kf54=\EFt, kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx,
+ kf59=\EFy, kf6=\EF6, kf60=\EFz, kf7=\EF7, kf8=\EF8, kf9=\EF9,
+ khome=\E[H, kich1=\E[L, kind=\EF+, kll=\E[U, knp=\E[T,
+ kpp=\E[S, kri=\EF-, ll=\E[U, nel=\r\n, op=\E[m, rc=\E[u,
+ rev=\E[7m, ri=\E[T, rmcup=\E[2b\E[u\r\E[K, rmso=\E[m,
+ rmul=\E[m, rs1=\Ec, sc=\E[s, sgr0=\E[0m, smcup=\E[s\E[1b,
+ smso=\E[7m, smul=\E[4m, use=ecma+index, use=klone+color,
+
+opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
+ lines#35, use=opennt,
+
+opennt-50|ntconsole-50|OpenNT-term50 compatible with color,
+ lines#50, use=opennt,
+
+opennt-60|ntconsole-60|OpenNT-term60 compatible with color,
+ lines#60, use=opennt,
+
+opennt-100|ntconsole-100|OpenNT-term100 compatible with color,
+ lines#100, use=opennt,
+
+# OpenNT wide terminals
+opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color,
+ cols#125, use=opennt,
+
+opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color,
+ lines#35, use=opennt-w,
+
+opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color,
+ lines#50, use=opennt-w,
+
+opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color,
+ lines#60, use=opennt-w,
+
+opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color,
+ cols#132, use=opennt,
+
+# OpenNT terminals with no smcup/rmcup (names match termcap entries)
+interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color,
+ rmcup@, smcup@, use=opennt,
+
+opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color,
+ lines#35, use=opennt-nti,
+
+opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color,
+ lines#50, use=opennt-nti,
+
+opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color,
+ lines#60, use=opennt-nti,
+
+opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color,
+ lines#100, use=opennt-nti,
+
+######## COMMON TERMINAL TYPES
#
-# If you want to use the FUNCT key on a tvi912[bc], use the
-# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
-# the following table (these also work on the 920 series):
+# This section describes terminal classes and maker brands that are still
+# quite common, but have proprietary command sets not blessed by ANSI.
#
-# Unshifted Function Keys:
+
+#### Altos
#
-# Key | capname|| Equivalent
-# -----|--------||------------
-# F1 | <kf1> || FUNCT + @
-# F2 | <kf2> || FUNCT + A
-# F3 | <kf3> || FUNCT + B
-# F4 | <kf4> || FUNCT + C
-# F5 | <kf5> || FUNCT + D
-# F6 | <kf6> || FUNCT + E
-# F7 | <kf7> || FUNCT + F
-# F8 | <kf8> || FUNCT + G
-# F9 | <kf9> || FUNCT + H
-# F10 | <kf10> || FUNCT + I
-# F11 | <kf11> || FUNCT + J
+# Altos made a moderately successful line of UNIX boxes. In 1990 they were
+# bought out by Acer, a major Taiwanese manufacturer of PC-clones.
+# Acer has a web site at http://www.acer.com.
#
-# Shifted Function Keys:
+# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
+# His comments suggest they were shipped with the system.
#
-# SHIFT + Key | capname|| Equivalent
-# -------------|--------||------------
-# SHIFT + F1 | <kf12> || FUNCT + `
-# SHIFT + F2 | <kf13> || FUNCT + a
-# SHIFT + F3 | <kf14> || FUNCT + b
-# SHIFT + F4 | <kf15> || FUNCT + c
-# SHIFT + F5 | <kf16> || FUNCT + d
-# SHIFT + F6 | <kf17> || FUNCT + e
-# SHIFT + F7 | <kf18> || FUNCT + f
-# SHIFT + F8 | <kf19> || FUNCT + g
-# SHIFT + F9 | <kf20> || FUNCT + h
-# SHIFT + F10 | <kf21> || FUNCT + i
-# SHIFT + F11 | <kf22> || FUNCT + j
+
+# (altos2: had extension capabilities
+# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
+# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
+# :HL=^AP\r:SP=\E[i:\
+# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
+# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
+# Comparison with the k* capabilities makes it obvious that the c* things are
+# shift keys. I have renamed them to keys 32 and up accordingly. Also,
+# :sr: was given as a boolean-- esr)
+altos2|alt2|altos-2|altos II,
+ cols#80, it#8, lines#24, xmc#0,
+ clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
+ if=/usr/share/tabset/vt100, il1=\E[L, ind=\n,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
+ kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
+ kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
+ kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
+ kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
+ kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
+ nel=\r\n, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
+ smam=\E[?7h, smso=\E[7m, smul=\E[4m,
+# (altos3: had extension capabilities
+# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
+# :HL=^AP\r:SP=\E[i:\
+# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
+altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
+ blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
+altos4|alt4|altos-4|altos IV,
+ use=wy50,
+# (altos7: had extension capabilities:
+# :GG#0:GI=\EH8:GF=\EH7:\
+# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
+# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
+# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
+# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
+# Comparison with the k* capabilities makes it obvious that the c* things are
+# shift keys. I have renamed them to keys 32 and up accordingly. I have
+# also made this entry relative to adm12 in order to give it an <sgr>. The
+# <invis> imported by use=adm+sgr may work, let me know. -- esr)
+altos7|alt7|altos VII,
+ am, mir,
+ cols#80, lines#24, xmc#0,
+ acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
+ clear=\E+^^, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
+ ind=\n, invis=\EG1,
+ is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
+ kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
+ kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
+ kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
+ kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
+ kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
+ kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
+ knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=\r\n, ri=\Ej,
+ rmir=\Er, smir=\Eq, use=adm+sgr,
+altos7pc|alt7pc|altos PC VII,
+ kend=\ET, use=altos7,
+
+#### Hewlett-Packard (hp)
#
-# PORTS AND SWITCH SETTINGS
+# Hewlett-Packard
+# 8000 Foothills Blvd
+# Roseville, CA 95747
+# Vox: 1-(916)-785-4363 (Technical response line for VDTs)
+# 1-(800)-633-3600 (General customer support)
#
-# Here are the switch settings for the TVI-912B/TVI-920B and
-# TVI-912C/TVI-920C:
#
-# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
-# 2: 9600 3: 4800 4: 2400 5: 1200
-# 6: 600 7: 300 8: 150 9: 75
-# 10: 110
+# As of March 1998, HP no longer has any terminals in production.
+# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
+# supported (they still have parts). So are the 2392a and 2394a.
+# See the WORKSTATION CONSOLES section for the 700s.
#
-# S2 UART/Terminal options:
-# Up Down
-# 1: Not used Not allowed
-# 2: Alternate character set Standard character set
-# 3: Full duplex Half duplex
-# 4: 50 Hz refresh 60 Hz refresh
-# 5: No parity Send parity
-# 6: 2 stop bits 1 stop bit
-# 7: 8 data bits 7 data bits
-# 8: Not used Not allowed on Rev E or lower
-# 9: Even parity Odd parity
-# 10: Steady cursor Blinking cursor
-# (On Rev E or lower, use W25 instead of switch 10.)
+
+# Generic HP terminal - this should (hopefully) work on any HP terminal.
+hpgeneric|hp|hewlett-packard generic terminal,
+ OTbs, OTpt, am, da, db, mir, xhp,
+ cols#80, lines#24, lm#0, vt#6,
+ bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
+ ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
+ ind=\n, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
+ sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
+ vpa=\E&a%p1%dY,
+
+hp110|hewlett-packard model 110 portable,
+ lines#16, use=hpgeneric,
+
+hp+pfk+cr|hp function keys with CR,
+ kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
+ kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
+
+hp+pfk-cr|hp function keys w/o CR,
+ kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
+ kf8=\Ew,
+
+# The hp2621s use the same keys for the arrows and function keys,
+# but not separate escape sequences. These definitions allow the
+# user to use those keys as arrow keys rather than as function
+# keys.
+hp+pfk+arrows|hp alternate arrow definitions,
+ kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
+ kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
+ kll=\Eq\r, kri=\Es\r,
+
+hp+arrows|hp arrow definitions,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
+ kind=\ES, kll=\EF, kri=\ET,
+
+# Generic stuff from the HP 262x series
#
-# S5 UART/Terminal options:
-# Open Closed
-# 1: P3-6 Not connected DSR received on P3-6
-# 2: P3-8 Not connected DCD received on P3-8
+hp262x|HP 262x terminals,
+ xhp,
+ blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
+ invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
+ kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
+ krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
+ sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
+ %;%?%p4%t%{65}%|%;%c,
+ sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
+
+# Note: no <home> on HPs since that homes to top of memory, not screen.
+# Due to severe 2621 braindamage, the only way to get the arrow keys to
+# transmit anything at all is to turn on the function key labels
+# with <smkx>, and even then the user has to hold down shift!
+# The default 2621 turns off the labels except when it has to to
+# enable the function keys. If your installation prefers labels
+# on all the time, or off all the time (at the "expense" of the
+# function keys), use 2621-nl or 2621-wl.
#
-# 3 Open, 4 Open: P3-20 Not connected
-# 3 Open, 4 Closed: DTR on when terminal is on
-# 3 Closed, 4 Open: DTR is connected to RTS
-# 3 Closed, 4 Closed: Not allowed
+# Note: there are newer ROMs for 2621's that allow you to set
+# strap A so the regular arrow keys xmit \EA, etc, as with the
+# 2645. However, even with this strap set, the terminal stops
+# xmitting if you reset it, until you unset and reset the strap!
+# Since there is no way to set/unset the strap with an escape
+# sequence, we don't use it in the default.
+# If you like, you can use 2621-ba (brain-damaged arrow keys).
+hp2621-ba|2621 w/new rom and strap A set,
+ rmkx@, smkx@, use=hp+arrows, use=hp2621,
+
+# hp2621 with function labels. Most of the time they are off,
+# but inside vi, the function key labels appear. You have to
+# hold down shift to get them to xmit.
+hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
+ is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
+hp2621-fl|hp 2621,
+ xhp@, xon,
+ pb#19200,
+ cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
+ ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
+ sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
+ use=hp+pfk+cr, use=hpgeneric,
+
+# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
+hp2621p|hp 2621 with printer,
+ mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
+
+hp2621p-a|hp2621p with fn as arrows,
+ use=hp+pfk+arrows, use=hp2621p,
+
+# hp2621 with k45 keyboard
+hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
+ kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
+
+# 2621 using all 48 lines of memory, only 24 visible at any time.
+hp2621-48|48 line 2621,
+ lines#48,
+ cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
+ use=hp2621,
+
+# 2621 with no labels ever. Also prevents vi delays on escape.
+hp2621-nl|hp 2621 with no labels,
+ kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
+ use=hp2621-fl,
+
+# Needed for UCB ARPAVAX console, since lsi-11 expands tabs
+# (wrong).
#
-# 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
-# all data transmitted out of the modem port (P3) will also be
-# transmitted out of the printer port (P4).
+hp2621-nt|hp 2621 w/no tabs,
+ ht@, use=hp2621,
+
+# Hp 2624 B with 4 or 10 pages of memory.
#
-# 6 Open, 7 Open: Not allowed
-# 6 Open, 7 Closed: 20ma current loop input
-# 6 Closed, 7 Open: RS232 input
-# 6 Closed, 7 Closed: Not allowed
+# Some assumptions are made with this entry. These settings are
+# NOT set up by the initialization strings.
#
-# Jumper options:
-# If the jumper is installed, the effect will occur (the next time the terminal
-# is switched on).
+# Port Configuration
+# RecvPace=Xon/Xoff
+# XmitPace=Xon/Xoff
+# StripNulDel=Yes
#
-# S4/W31: Enables automatic LF upon receipt of CR from
-# remote or keyboard.
-# S4/W32: Enables transmission of EOT at the end of Send. If not
-# installed, a carriage return is sent.
-# S4/W33: Disables automatic carriage return in column 80.
-# S4/W34: Selects Page Print Mode as initial condition. If not
-# installed, Extension Mode is selected.
+# Terminal Configuration
+# InhHndShk=Yes
+# InhDC2=Yes
+# XmitFnctn(A)=No
+# InhEolWrp=No
#
-# NON-STANDARD CAPABILITIES
+# Note: the 2624 DOES have a true <home>, believe it or not!
#
-# Sending <u9> or <u7> returns a cursor position report in the format
-# YX\r, where Y and X are as in <cup>. This format is described in
-# <u8> and <u6>, but it's not clear how one should write an
-# appropriate scanf string, since we need to subtract %' ' from the
-# character after reading it. The <u9> capability is used by tack(1)
-# to synchronize during padding tests, and seems to work for that
-# purpose.
+# The 2624 has an "error line" to which messages can be sent.
+# This is CLOSE to what is expected for a "status line". However,
+# after a message is sent to the "error line", the next carriage
+# return is EATEN and the "error line" is turned back off again!
+# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
#
-# This description also includes the obsolete termcap capabilities
-# has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
+# This entry supports emacs (and any other program that uses raw
+# mode) at 4800 baud and less. I couldn't get the padding right
+# for 9600.
#
-# FEATURES NOT YET DESCRIBED IN THIS TERMINFO
+# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
+hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
+ da, db,
+ lm#96,
+ flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
+
+# This hp2626 entry does not use any of the fancy windowing stuff
+# of the 2626.
#
-# The FUNCT modifier actually works with every normal key by sending
-# ^AX\r, where X is the sequence normally sent by that key. This is a
-# sort of meta key not currently describable in terminfo.
+# Indeed, terminfo does not yet handle such stuff. Since changing
+# any window clears memory, it is probably not possible to use
+# this for screen opt.
#
-# There are quite a few other keys (especially on the 920 models,) but
-# they are for the most part only useful in block mode.
+# ed is incredibly slow most of the time - I am guessing at the
+# exact padding. Since the terminal uses xoff/xon this is intended
+# only for cost computation, so that the terminal will prefer el
+# or even dl1 which is probably faster!
#
-# These terminals have lots of forms manipulation features, mainly
-# useful in block mode, including "clear X to nulls" (vs. "clear X to
-# spaces"; nulls are sentinels for "send X" operations); "send X"
-# operations for uploading all or part of the screen; and block-mode
-# editing keys (they don't send escape sequences, but manipulate video
-# memory directly). Block mode is used for local editing, and protect
-# mode (in conjunction with the "write protect" attribute,
-# a.k.a. half-intensity outside of protect mode) is used to control
-# which parts of the screen are edited/sent/printed (by <mc0>).
+# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
+# extra slow on the last line of the window.
#
-# There are at least two major families of ROM, "early" and
-# A49B1/A49C1; the major difference seems to be that the latter ROMs
-# support a few extra escape sequences for manipulating the off-screen
-# memory page, and for sending whole pages back to the host (mainly
-# useful in block mode.) The descriptions in this file don't use any
-# of those sequences: set cursor position including page (\E-PYX,
-# where P is \s for page 0 and ! for page 1 [actually only the LSB of
-# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
-# as in <cup>); read cursor position (\E/), which is analogous to <u9>
-# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
-# are as in <cup>, and some "send page" features mainly useful for
-# forms manipulation.
+# The padding probably should be changed.
#
-# The keyboard enable (\E") and disable (\E#) sequences are unused,
-# except that a terminal reset (<is2>) enables the keyboard.
+hp2626|hp2626a|hp2626p|hp 2626,
+ da, db,
+ lm#0, pb#19200,
+ ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
+ is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
+ use=hp+labels, use=scrhp,
+
+# This entry is for sysline. It allocates a 23 line window with
+# a 115 line workspace for regular use, and a 1 line window for
+# the status line.
#
-# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
-# enabled in <is2>, but auto-flip is very jarring so we don't use it.
+# This assumes port 2 is being used.
+# Turn off horizontal line, Create ws #1 with 115 lines,
+# Create ws #2 with 1 line, Create window #1 lines 1-23,
+# Create window #2 lines 24-24, Attach cursor to workspace #1.
+# Note that this clears the tabs so it must be done by tset before
+# it sets the tabs.
#
-# BUGS
+hp2626-s|hp 2626 using only 23 lines,
+ eslok, hs,
+ lines#23,
+ fsl=\E&d@\E&w7f2p1I\E&w4f1I,
+ is1=\E&q3t0{0H\s\E&w0f115n1I\s\E&w0f1n2I\s\E&w2f1i0d0u22l0S
+ \s\E&w2f2i0d23u23l0S\s\E&w7f2p1I\s\r,
+ tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
+# Force terminal back to 24 lines after being 23.
+hp2626-ns|hp 2626 using all 24 lines,
+ is1=\E&q3t0{0H\s\E&w0f118n1I\s\E&w0f1n2I\s\E&w2f1i0d0u23l0S
+ \s\E&w3f2I\s\E&w7f2p1I\s\r,
+ use=hp2626,
+# Various entries useful for small windows on 2626.
+hp2626-12|hewlett-packard 2626 12 lines,
+ lines#12, use=hp2626,
+hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
+ cols#40, lines#12, use=hp2626,
+hp2626-x40|hewlett-packard 2626 40 columns,
+ cols#40, use=hp2626,
+hp2626-12-s|hewlett-packard 2626 11 lines plus status,
+ lines#11, use=hp2626-s,
+
#
-# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
-# sequences (I infer that in some TeleVideo terminal they may invert
-# and uninvert the display) so the <flash> sequence given here is a
-# cheesy page-flip instead.
+# hp2627 color tubes from University of Wisconsin
#
-# The back_tab (<cbt>) sequence (\EI) doesn't work according to
-# tack(1), so it is not included in the descriptions below.
+hp2627a-rev|hp 2627 with reverse video colors,
+ cr=\r, cud1=\n, ht=^I, ind=\n,
+ is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3
+ \r,
+ kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmul=\E&v0S\E&d@,
+ smul=\E&dD\E&v1S, use=hp2621-nl,
+hp2627a|hp 2627 color terminal with no labels,
+ cr=\r, cud1=\n, ht=^I, ind=\n,
+ is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
+ kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rmso=\E&v0S,
+ rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
+ use=hp2621-nl,
+hp2627c|hp 2627 color (cyan) terminal with no labels,
+ cr=\r, cud1=\n, ht=^I, ind=\n,
+ is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
+ kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, use=hp2627a,
+
+# hp2640a doesn't have the Y cursor addressing feature, and C is
+# memory relative instead of screen relative, as we need.
#
-# It's not clear whether auto_left_margin (<bw>) flag should be set
-# for these terminals; tack says yes, so it is set here, but this
-# differs from other descriptions I've seen.
-#
-# Extension print mode (<mc5>) echoes all characters to the printer
-# port [in addition to displaying them] except for the page print mode
-# sequence (<mc4>); this is a slight violation of the terminfo
-# definition for <mc5> but I don't expect it to cause problems. We
-# reset to page print mode in <rs1> since it may have been enabled
-# accidentally.
-#
-# The descriptions with plus signs (+) are building blocks.
-
-tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
- OTbs, OTpt, am, bw,
- cols#80, it#8, lines#24,
- bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
- dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
- home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
- if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
- ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J,
- kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA,
- mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
- u7=\E?, u8=%c%c\r, u9=\E?,
+hp2640a|hp 2640a,
+ cup@, rmkx@, smkx@, use=hp2645,
-# This isn't included in the basic capabilities because it is
-# typically unusable in combination with the full range of video
-# attributes, since the magic cookie attributes turn into ASCII
-# control characters, and the half-intensity ("protected") attribute
-# converts all affected characters to spaces.
+hp2640b|hp2644a|hp 264x series,
+ rmkx@, smkx@, use=hp2645,
-tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
- mc0=\EP,
+# (hp2641a: removed unknown :gu: -- esr)
+hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
+ am, da, db, mir, xhp,
+ cols#80, lines#24,
+ bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
+ ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
+ if=/usr/share/tabset/std, il1=\EL, ind=\n,
+ is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
+ rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
+ vpa=\E&a%p1%2dY,
-# This uses half-intensity mode (<dim>) for standout (<smso>), and
-# exposes no other attributes (half-intensity is the only attribute
-# that does not generate a magic cookie.)
+# This terminal should be used at 4800 baud or less. It needs padding for
+# plain characters at 9600, I guessed at an appropriate cr delay. It really
+# wants ^E/^F handshaking, but that doesn't work well even if you write
+# software to support it.
+hp2645|hp45|HP 2645 series,
+ pb#9600,
+ blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
+ ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
+ kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
+ rmkx=\E&s0A,
+ sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|
+ %;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
+ sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
+# You should use this terminal at 4800 baud or less.
+hp2648|hp2648a|HP 2648a graphics terminal,
+ clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
+ dch1=\EP$<7>, ip=$<5>, use=hp2645,
-tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
- msgr,
- dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
- smso=\E),
+# The HP 150 terminal is a fairly vanilla HP terminal, with the
+# clreol standout problem. It also has graphics capabilities and
+# a touch screen, which we don't describe here.
+hp150|hewlett packard Model 150,
+ OTbs, use=hp2622,
-# Full magic-cookie attribute support, with half-intensity reverse
-# video for standout. Note that we add a space in the <dim> sequence
-# to give a consistent magic-cookie count. Also note that <sgr> uses
-# backspacing (in the TVI-supported order) to apply all requested
-# attributes with only a single magic cookie.
+# HP 2382a terminals, "the little ones." They don't have any
+# alternate character set support and sending out ^N/^O will
+# leave the screen blank.
+hp2382a|hp2382|hewlett packard 2382a,
+ da, db,
+ lh#1, lm#48,
+ acsc@,
+ pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
+ %s,
+ rmacs@,
+ sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
+ %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
+ %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
+ %+%e%{64}%;%;%c,
+ sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
-tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
- xmc#1,
- blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
- rmul=\Em,
- sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
- sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
+hp2621-a|hp2621a-a|hp2621 with fn as arrows,
+ use=hp+pfk+arrows, use=hp2621-fl,
-# This uses the second page memory option to save & restore screen
-# contents. If your terminal is missing the option, this description
-# should still work, but that has not been tested.
+# newer hewlett packard terminals
-tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
- flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
- smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
+newhpkeyboard|generic entry for HP extended keyboard,
+ kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
+ kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
+ kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
+ use=hp+pfk-cr,
-# This simulates flashing by briefly toggling to the other page
-# (kludge!)
+newhp|generic entry for new hewlett packard terminals,
+ am, bw, mir, xhp, xon,
+ cols#80, lines#24, pb#4800,
+ acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRm
+ Fn/q\,t5u6v8w7x.,
+ bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=\r, cub1=^H,
+ cud1=\n, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
+ dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=\n,
+ invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=\r\n,
+ pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
+ pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
+ pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
+ rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
+ sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga
+ %+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+
+ %Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}
+ %+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
+ sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
+ tbc=\E3, use=newhpkeyboard,
-tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
- bel=\EK$<100>\EK, use=tvi912b+2p,
+memhp|memory relative addressing for new HP ttys,
+ vt#6,
+ clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
+ cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
+ home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
+ mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
-# Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
+scrhp|screen relative addressing for new HP ttys,
+ clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
+ cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
+ cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
+ home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
+ mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
-tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
- kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
- kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
- kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
- kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
- kf8=^AG\r, kf9=^AH\r,
+# (hp+labels: added label values from a BRL termcap -- esr)
+hp+labels|"standard" label info for new HP ttys,
+ lh#2, lw#8, nlab#8,
+ lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
+ pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t\s%;%p2
+ %s,
+ rmln=\E&j@, smln=\E&jB,
-# Combinations of the basic building blocks
+hp+printer|"standard" printer info for HP ttys,
+ ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
-tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
- use=tvi912b+2p, use=tvi912b-unk,
-tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
- use=tvi912b+vb, use=tvi912b-unk,
+# The new hp2621b is kind of a cross between the old 2621 and the
+# new 262x series of machines. It has dip-switched options.
+# The firmware has a bug in it such that if you give it a null
+# length label, the following character is eaten!
+hp2621b|hp 2621b with old style keyboard,
+ lh#1, lm#48, lw#8, nlab#8,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
+ kind=\ET, kll=\EF, kri=\ES,
+ pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c
+ %;%p2%s\E%{111}%p1%+%c\r,
+ smln=\E&jB, use=hp2621,
-tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
- use=tvi912b+printer, use=tvi912b-unk,
+hp2621b-p|hp 2621b with printer,
+ use=hp+printer, use=hp2621b,
-tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
- use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
+# hp2621b - new 2621b with new extended keyboard
+# these are closer to the new 26xx series than the other 2621b
+hp2621b-kx|hp 2621b with extended keyboard,
+ use=newhpkeyboard, use=hp2621b,
-tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
- use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
+hp2621b-kx-p|hp 2621b with new keyboard & printer,
+ use=hp+printer, use=hp2621b-kx,
-tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
- use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
+# Some assumptions are made in the following entries.
+# These settings are NOT set up by the initialization strings.
+#
+# Port Configuration
+# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
+#
+# Terminal Configuration
+# InhHndShk(G)=Yes InhDC2(H)=Yes
+# XmitFnctn(A)=No InhEolWrp=No
+#
+#
+# Hp 2622a & hp2623a display and graphics terminals
+#
+hp2622|hp2622a|hp 2622,
+ da, db,
+ lm#0, pb#19200,
+ is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
-tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
- use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
+# The 2623 is a 2622 with extra graphics hardware.
+hp2623|hp2623a|hp 2623,
+ use=hp2622,
-tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
- use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
+hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
+ use=hp+printer, use=hp2624,
-tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
- use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
+# The hewlett packard B can have an optional extra 6 pages of memory.
+hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
+ lm#240, use=hp2624,
-tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
- use=tvi912b+dim, use=tvi912b-unk,
+hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
+ lm#240, use=hp2624b-p,
-tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
- use=tvi912b+mc, use=tvi912b-unk,
+# Color manipulations for HP terminals
+hp+color|hp with colors,
+ ccc,
+ colors#16, ncv#17, pairs#7,
+ initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.
+ %p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1
+ %e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=
+ %t1%e.%p7%d%;z%p1%dI,
+ oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5
+ I\E&v1b1c6I\E&v1x1y7I,
+ op=\E&v0S, scp=\E&v%p1%dS,
-tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
- use=tvi920b+fn, use=tvi912b-unk,
+# <is2> sets the screen to be 80 columns wide
+hp2397a|hp2397|hewlett packard 2397A color terminal,
+ is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
-tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
- use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
+# HP 700/44 Setup parameters:
+# Terminal Mode HP-PCterm
+# Inhibit Auto Wrap NO
+# Status Line Host Writable
+# PC Character Set YES
+# Twenty-Five Line Mode YES
+# XON/XOFF @128 or 64 (sc)
+# Keycode Mode NO or YES (sc)
+# Backspace Key BS or BS/DEL
+#
+# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
+# \E\\? does not turn off keycode mode
+# <smsc> sets alternate start/stop; keycode on
+hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
+ am, eo, xenl, xon,
+ cols#80, lines#25,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
+ \263,
+ bel=^G, cbt=\E[Z, clear=\E[2J\E[H, cr=\r, cub1=\E[D,
+ cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ ich1=\E[@, il1=\E[L, ind=\n,
+ is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
+ kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
+ kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
+ kpp=\E[5~, rmam=\E[?7l,
+ rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
+ smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
+ smul=\E[4m, xoffc=g, xonc=e, use=vt220+cvis,
+#
+# (hp2392: copied <rmir> here from hpex -- esr)
+hp2392|239x series,
+ cols#80,
+ cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
+ kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
+ kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
+ rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
+ use=hpsub,
-tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
- use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
-
-tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
- use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
-
-tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
- use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
- use=tvi912b-unk,
-
-tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
- use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
- use=tvi912b-unk,
-
-tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
- use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
- use=tvi912b-unk,
+hpsub|hp terminals -- capability subset,
+ am, da, db, mir, xhp, xon,
+ lines#24,
+ bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
+ cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
+ ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n,
+ is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
+ sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
-tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
- use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
- use=tvi912b-unk,
+# hpex:
+# May be used for most 24 x 80 hp terminals,
+# but has no padding added, so may allow runover in some terminals at high
+# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
+# hp98x5 terminal emulators or hp98x6 consoles.
+# Adds xy-cursor addressing, vertical cursor addressing, home,
+# last line, and underline capabilities.
+#
+# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
+# moved <rmir> here from hpsub -- esr)
+hpex|hp extended capabilities,
+ cr=\r, cud1=\n, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=\n, kbs=^H,
+ kcub1=^H, kcud1=\n, nel=\r\n, rmir=\ER, rmul=\E&d@, smir=\EQ,
+ smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
-tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
- use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
- use=tvi912b-unk,
+# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
+hp2|hpex2|hewlett-packard extended capabilities newer version,
+ am, da, db, mir, xhp,
+ cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
+ bel=^G, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
+ cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
+ dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
+ il1=\EL, ind=\n, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
+ ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
+ kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
+ kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
+ krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
+ pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
+ pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
+ pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
+ pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
+ rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
+ sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+
+ %p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
+ sgr0=\E&d@\017, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
+ smso=\E&dB, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
-tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
- use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
- use=tvi912b-unk,
+# HP 236 console
+# From: <ddavis@ic.berkeley.edu>
+hp236|hp236 internal terminal emulator,
+ OTbs, am,
+ cols#80, lines#24,
+ clear=\EF, cnorm=\EDE, cub1=^H,
+ cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
+ dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
+ sgr0=\ECI, smso=\EBI,
-tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
- use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
+# This works on a hp300 console running Utah 4.3 BSD
+# From: Craig Leres <leres@okeeffe.berkeley.edu>
+hp300h|HP Catseye console,
+ OTbs, am, da, db, mir, xhp,
+ cols#128, lines#51, lm#0, xmc#0,
+ bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H, cud1=\EB,
+ cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
+ dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
+ if=/usr/share/tabset/stdcrt, il1=\EL, ind=\n, kbs=^H,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
+ rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
+ smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
+ vpa=\E&a%p1%dY,
+# From: Greg Couch <gregc@ernie.berkeley.edu>
+hp9837|hp98720|hp98721|HP 9000/300 workstations,
+ OTbs, am, da, db, mir, xhp,
+ cols#128, it#8, lines#46, lm#0,
+ bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
+ cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
+ dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
+ il1=\EL, ind=\n, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
+ ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
+ kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
+ sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
+ tbc=\E3, vpa=\E&a%p1%dY,
+# HP 9845 desktop computer from BRL
+# (hp9845: removed unknown capability :gu: -- esr)
+hp9845|HP 9845,
+ OTbs, am, da, db, eo, mir, xhp,
+ cols#80, lines#21,
+ OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
+ ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
+ rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
+# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
+# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
+# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
+hp98550|hp98550a|HP 9000 Series 300 color console,
+ OTbs, am, da, db, mir, xhp,
+ cols#128, it#8, lines#49, lm#0,
+ acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
+ clear=\EH\EJ, cnorm=\E*dQ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
+ dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
+ if=/usr/share/tabset/std, il1=\EL, ind=\n, invis=\E&ds,
+ kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
+ kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
+ khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
+ knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
+ rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
+ sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
+ smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
+# From: Victor Duchovni <vic@fine.princeton.edu>
+# (hp700-wy: removed obsolete ":nl=^J:";
+# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
+hp700-wy|HP700/41 emulating wyse30,
+ OTbs, am, bw, mir, msgr,
+ cols#80, it#8, lines#24, xmc#1,
+ cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
+ if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
+ is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=^?, kcbt=\EI,
+ kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
+ kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
+ ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
+ sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
+ smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
+hp70092|hp70092a|hp70092A|HP 700/92,
+ am, da, db, xhp,
+ cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
+ acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
+ bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=\r, cub1=^H,
+ cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
+ dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
+ hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
+ ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
+ kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
+ kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
+ krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
+ rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
+ sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
+ smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
-tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
- use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
+bobcat|sbobcat|HP 9000 model 300 console,
+ am, da, db, mir, xhp,
+ cols#128, it#8, lines#47, xmc#0,
+ cbt=\Ei, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
+ dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
+ il1=\EL$<10*/>, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=\r\n, rmir=\ER,
+ rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
+ smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
+gator-t|HP 9000 model 237 emulating extra-tall AAA,
+ lines#94, use=gator,
+gator|HP 9000 model 237 emulating AAA,
+ bw, km, mir, ul,
+ cols#128, it#8, lines#47,
+ bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
+ dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
+ ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
+ il1=\E[L, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n,
+ rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+gator-52|HP 9000 model 237 emulating VT52,
+ cols#128, lines#47, use=vt52-basic,
+gator-52t|HP 9000 model 237 emulating extra-tall VT52,
+ lines#94, use=gator-52,
-# Televideo 921 and variants
-# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
-# (tvi921: removed :ko=bt: before translation, I see no backtab cap;
-# also added empty <acsc> to suppress tic warning -- esr)
-tvi921|televideo model 921 with sysline same as page & real vi function,
- OTbs, OTpt, am, hs, xenl, xhp,
- cols#80, lines#24, xmc#0,
- acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
- cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
- el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
- if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
- is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
- kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
- ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
- rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
-# without the beeper
-# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
-# also added empty <acsc> to suppress tic warning -- esr)
-tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
- am, hs, xenl, xhp,
- cols#80, lines#24, xmc#0,
- acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
- cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
- el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
- ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
- invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
- kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
- kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
- nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
-# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
-tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
- dl1=\ER$<2*/>, il1=\EE$<2*/>,
- is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
- kil1=\EE$<2*/>, use=tvi92B,
+#### Honeywell-Bull
+#
+# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
+#
-# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
-# in from a BSD termcap file because it looks like they do something the
-# old ones skip -- esr)
-tvi924|televideo tvi924,
- am, bw, hs, in, mir, msgr, xenl, xon,
- cols#80, it#8, lines#24, wsl#80, xmc#0,
- bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
- cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
- cub1=^H, cud1=^V, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
- dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
- flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
- ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
- invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
- kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
- kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
- kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
- kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
- kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
- kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
- lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
- pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
- use=adm+sgr,
+# Honeywell Bull terminal. Its cursor and function keys send single
+# control characters and it has standout/underline glitch. Most programs
+# do not like these features/bugs. Visual bell is realized by flashing the
+# "keyboard locked" LED.
+dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
+ cols#80, lines#25,
+ clear=^]^_, cr=\r, cub1=^Y, cud1=^K, cuf1=^X,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
+ flash=\E[2h\E[2l, home=^], ht=^I, ind=\n, kbs=^H, kcub1=^Y,
+ kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=\r\n,
+dku7003|Honeywell Bull DKU 7003 all features described,
+ msgr,
+ xmc#1,
+ blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+ use=dku7003-dumb,
-# TVI925 DIP switches. In each of these, D = Down and U = Up,
+#### Lear-Siegler (adm)
#
-# Here are the settings for the external (baud) switches (S1):
+# These guys are long since out of the terminals business, but
+# in 1995 many current terminals still have an adm type as one of their
+# emulations (usually their stupidest, and usually labeled adm3, though
+# these `adm3' emulations normally have adm3a+ capabilities).
#
-# Position Baud
-# 7 8 9 10 [Printer]
-# 1 2 3 4 [Main RS232]
-# -----------------------------------------------------
-# D D D D 9600
-# D D D U 50
-# D D U D 75
-# D D U U 110
-# D U D D 135
-# D U D U 150
-# D U U D 300
-# D U U U 600
-# U D D D 1200
-# U D D U 1800
-# U D U D 2400
-# U D U U 3600
-# U U D D 4800
-# U U D U 7200
-# U U U D 9600
-# U U U U 19200
+# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
+# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
+# was being held to ground would trigger a send of the top line on the screen.
+# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
+# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
+# for clearing up this point.)
+
+adm1a|adm1|lsi adm1a,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=\E;$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
+ ind=\n,
+adm2|lsi adm2,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=\n,
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
+# (adm3: removed obsolete ":ma=^K^P:" -- esr)
+adm3|lsi adm3,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, ind=\n,
+# The following ADM-3A switch settings are assumed for normal operation:
+# SPACE U/L_DISP CLR_SCRN 24_LINE
+# CUR_CTL LC_EN AUTO_NL FDX
+# Other switches may be set for operator convenience or communication
+# requirements. I recommend
+# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
+# ETX_OFF EOT_OFF
+# Most of these terminals required an option ROM to support lower case display.
+# Open the case and look at the motherboard; if you see an open 24-pin DIP
+# socket, you may be out of luck.
#
+# (adm3a: some capabilities merged in from BRl entry -- esr)
+adm3a|lsi adm3a,
+ OTbs, am,
+ cols#80, lines#24,
+ OTma=^K^P, OTnl=\n, bel=^G, clear=\032$<1/>, cr=\r, cub1=^H,
+ cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L,
+ kcuu1=^K, rs2=^N,
+adm3a+|adm3a plus,
+ kbs=^H, use=adm3a,
+# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
+adm5|lsi adm5,
+ xmc#1,
+ bel=^G, cr=\r, cud1=\n, ed=\EY, el=\ET, kbs=^H, khome=^^,
+ rmso=\EG, smso=\EG, use=adm3a+,
+# A lot of terminals other than adm11s use these. Wherever you see
+# use=adm+sgr with some of its capabilities disabled, try the
+# disabled ones. They may well work but not have been documented or
+# expressed in the using entry. We'd like to cook up an <sgr> but the
+# <rmacs>/<smacs> sequences of the using entries vary too much.
+adm+sgr|adm style highlight capabilities,
+ invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
+ smso=\EG4, smul=\EG8,
+# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
+# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
+# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
+# be ^Z, according to his entry.
+# (adm11: <smul>=\EG4 was obviously erroneous because it also said
+# <rev>=\EG4. Looking at other ADMs confirms this -- esr)
+adm11|LSI ADM-11,
+ OTbs, am, hs,
+ OTkn#8, cols#80, lines#24,
+ OTnl=\n, bel=^G, blink=\EG2, clear=\E*, cr=\r, cub1=^H,
+ cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
+ kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, khome=^^, nel=\r\n, tsl=\EF\E),
+ use=adm+sgr,
+# From: Andrew Scott Beals <bandy@lll-crg.ARPA>
+# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
+# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
+# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
+# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
+# via BRL. That entry asserted <xmc#1>, but I've left that out because
+# neither earlier nor later ADMSs have it -- esr)
#
-# Settings for word length and stop-bits (S1)
+# You will need to get into the supervisor setup before you can set
+# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
+# see a lot more setup options.
#
-# Position Description
-# 5 6
-# ---------------------------
-# U - 7-bit word
-# D - 8-bit word
-# - U 2 stop bits
-# - D 1 stop bit
+# While in supervisor setup you can also use following codes:
#
+# Ctrl-P Personality character selections (configure for example what
+# arrow keys send, if I recall correctly)
+# Ctrl-T tabs 1-80 use left&right to move and up to set and
+# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
+# Ctrl-B Binary setup (probably not needed. I think that everything can
+# be set using normal setup)
+# Ctrl-A Answerback mode (enter answerback message)
+# Ctrl-U User friendly mode (normal setup)
+# Ctrl-D Defaults entire setup and function keys from EPROM tables
+# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
+# Ctrl-R Reads both setup and functions keys from NVM.
+# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
#
-# S2 (external) settings
+# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
+# RTS/CTS used nowadays with virtually every modem and computer. 19200
+# bps works fine with hardware flow control.
#
-# Position Up Dn Description
-# --------------------------------------------
-# 1 X Local edit
-# X Duplex edit (transmit editing keys)
-# --------------------------------------------
-# 2 X 912/920 emulation
-# X 925
-# --------------------------------------------
-# 3 X
-# 4 X No parity
-# 5 X
-# --------------------------------------------
-# 3 X
-# 4 X Odd parity
-# 5 X
-# --------------------------------------------
-# 3 X
-# 4 X Even parity
-# 5 X
-# --------------------------------------------
-# 3 X
-# 4 X Mark parity
-# 5 X
-# --------------------------------------------
-# 3 X
-# 4 X Space parity
-# 5 X
-# --------------------------------------------
-# 6 X White on black display
-# X Black on white display
-# --------------------------------------------
-# 7 X Half Duplex
-# 8 X
-# --------------------------------------------
-# 7 X Full Duplex
-# 8 X
-# --------------------------------------------
-# 7 X Block mode
-# 8 X
-# --------------------------------------------
-# 9 X 50 Hz
-# X 60 Hz
-# --------------------------------------------
-# 10 X CR/LF (Auto LF)
-# X CR only
+# The following null-modem cable should fix this and enable you to use
+# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
+# set ADM-12+ for DTR handshaking from supervisor setup.
#
-# S3 (internal switch) settings:
+# PC Serial ADM-12+
+# -------- -------
+# 2 - 3
+# 3 - 2
+# 4 - 5
+# 5 - 20
+# 6,8 - 4
+# 7 - 7
+# 20 - 6,8
#
-# Position Up Dn Description
-# --------------------------------------------
-# 1 X Keyclick off
-# X Keyclick on
-# --------------------------------------------
-# 2 X English
-# 3 X
-# --------------------------------------------
-# 2 X German
-# 3 X
-# --------------------------------------------
-# 2 X French
-# 3 X
-# --------------------------------------------
-# 2 X Spanish
-# 3 X
-# --------------------------------------------
-# 4 X Blinking block cursor
-# 5 X
-# --------------------------------------------
-# 4 X Blinking underline cursor
-# 5 X
-# --------------------------------------------
-# 4 X Steady block cursor
-# 5 X
-# --------------------------------------------
-# 4 X Steady underline cursor
-# 5 X
-# --------------------------------------------
-# 6 X Screen blanking timer (ON)
-# X Screen blanking timer (OFF)
-# --------------------------------------------
-# 7 X Page attributes
-# X Line attributes
-# --------------------------------------------
-# 8 X DCD disconnected
-# X DCD connected
-# --------------------------------------------
-# 9 X DSR disconnected
-# X DSR connected
-# --------------------------------------------
-# 10 X DTR Disconnected
-# X DTR connected
-# --------------------------------------------
+adm12|lsi adm12,
+ OTbs, OTpt, am, mir,
+ OTug#1, cols#80, it#8, lines#24,
+ bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
+ is2=\E0\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s
+ \s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s
+ \s\s\E1\s\s\s\s\s\s\s\s\E1\s\s\s\s\s\s\s\s\E1,
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
+ kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
+ kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
+ use=adm+sgr,
+# (adm20: removed obsolete ":kn#7:" -- esr)
+adm20|lear siegler adm20,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cuf1=^L,
+ cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
+ kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
+ sgr0=\E(, smso=\E),
+adm21|lear siegler adm21,
+ xmc#1,
+ bel=^G, cr=\r, cud1=\n, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
+ el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=\n, invis@, kbs=^H,
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
+ use=adm+sgr, use=adm3a,
+# (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
+# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
+# removed bogus-looking \200 from before <cup>. -- esr)
+adm22|lsi adm22,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
+ is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0
+ \0\0\0\0,
+ kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
+ lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
+# ADM 31 DIP Switches
#
-# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
-tvi925|televideo 925,
- OTbs, am, bw, hs, ul,
- cols#80, lines#24, xmc#1,
- bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
- cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
- flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
- ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
- kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
- ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
- kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
- kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
- tsl=\Eh\Ef, use=adm+sgr,
-# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
-# to avoid "magic cookie" standout glitch:
-tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
- xmc@,
- kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
-
-# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
-# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
-# for additional capabilities,
-# The following tvi descriptions from B:pjphar and virus!mike
-# is for all 950s. It sets the following attributes:
-# full duplex (\EDF) write protect off (\E()
-# conversation mode (\EC) graphics mode off (\E%)
-# white on black (\Ed) auto page flip off (\Ew)
-# turn off status line (\Eg) clear status line (\Ef\r)
-# normal video (\E0) monitor mode off (\EX or \Eu)
-# edit mode (\Er) load blank char to space (\Ee\040)
-# line edit mode (\EO) enable buffer control (^O)
-# protect mode off (\E\047) duplex edit keys (\El)
-# program unshifted send key to send line all (\E016)
-# program shifted send key to send line unprotected (\E004)
-# set the following to nulls:
-# field delimiter (\Ex0\200\200)
-# line delimiter (\Ex1\200\200)
-# start-protected field delimiter (\Ex2\200\200)
-# end-protected field delimiter (\Ex3\200\200)
-# set end of text delimiter to carriage return/null (\Ex4\r\200)
+# This information comes from two versions of the manual for the
+# Lear-Siegler ADM 31.
#
-# TVI 950 Switch Setting Reference Charts
+# Main board:
+# rear of case
+# +-||||-------------------------------------+
+# + S1S2 ||S +
+# + ||3 +
+# + +
+# + ||S +
+# + ||4 +
+# + +
+# + +
+# + +
+# + +
+# + +
+# +-+ +-+
+# + +
+# + S5 S6 S7 +
+# + == == == +
+# +----------------------------------------------+
+# front of case (keyboard)
#
-# TABLE 1:
+# S1 - Data Rate - Modem
+# S2 - Data Rate - Printer
+# ------------------------
+# Data Rate Setting
+# -------------------
+# 50 0 0 0 0
+# 75 1 0 0 0
+# 110 0 1 0 0
+# 134.5 1 1 0 0
+# 150 0 0 1 0
+# 300 1 0 1 0
+# 600 0 1 1 0
+# 1200 1 1 1 0
+# 1800 0 0 0 1
+# 2000 1 0 0 1
+# 2400 0 1 0 1
+# 3600 1 1 0 1
+# 4800 0 0 1 1
+# 7200 1 0 1 1
+# 9600 0 1 1 1
+# x 1 1 1 1
#
-# S1 1 2 3 4 5 6 7 8 9 10
-# +-----------------------+-----+-----+-----------------------+
-# | Computer Baud Rate |Data |Stop | Printer Baud Rate |
-# | |Bits |Bits | |
-# +------+-----------------------+-----+-----+-----------------------+
-# | Up | See | 7 | 2 | See |
-# +------+-----------------------+-----+-----+-----------------------+
-# | Down | TABLE 2 | 8 | 1 | TABLE 2 |
-# +------+-----------------------+-----+-----+-----------------------+
+# S3 - Interface/Printer/Attributes
+# ---------------------------------
+# Printer Busy Control
+# sw1 sw2 sw3
+# ---------------
+# off off off Busy not active, CD disabled
+# off off on Busy not active, CD enabled
+# off on off Busy active on J5-20, CD disabled
+# on off off Busy active on J5-19, CD disabled - Factory Set.
+# on off on Busy active on J5-19, CD enabled
#
+# sw4 Used in conjunction with S4 for comm interface control - Fact 0
#
-# S2 1 2 3 4 5 6 7 8 9 10
-# +-----+-----+-----------------+-----+-----------+-----+-----+
-# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
-# +------+-----+-----+-----------------+-----+-----------+-----+-----+
-# | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
-# +------+-----+-----+-----------------+-----+-----------+-----+-----+
-# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
-# +------+-----+-----+-----------------+-----+-----------+-----+-----+
+# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
#
-# TABLE 2:
+# sw6 ON enables printer BUSY active LOW - Factory Setting
+# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
#
-# +-----------+-----+-----+-----+-----+-----------+
-# | Display | 1 | 2 | 3 | 4 | Baud |
-# +-----------+-----+-----+-----+-----+ |
-# | Printer | 7 | 8 | 9 | 10 | Rate |
-# +-----------+-----+-----+-----+-----+-----------+
-# | D | D | D | D | 9600 |
-# | U | D | D | D | 50 |
-# | D | U | D | D | 75 |
-# | U | U | D | D | 110 |
-# | D | D | U | D | 135 |
-# | U | D | U | D | 150 |
-# | D | U | U | D | 300 |
-# | U | U | U | D | 600 |
-# | D | D | D | U | 1200 |
-# | U | D | D | U | 1800 |
-# | D | U | D | U | 2400 |
-# | U | U | D | U | 3600 |
-# | D | D | U | U | 4800 |
-# | U | D | U | U | 7200 |
-# | D | U | U | U | 9600 |
-# | U | U | U | U | 19200 |
-# +-----+-----+-----+-----+-----------+
+# sw7 ON - steady cursor - Factory Setting
+# OFF - blinking cursor
#
-# TABLE 3:
-# +-----+-----+-----+-----------+
-# | 3 | 4 | 5 | Parity |
-# +-----+-----+-----+-----------+
-# | X | X | D | None |
-# | D | D | U | Odd |
-# | D | U | U | Even |
-# | U | D | U | Mark |
-# | U | U | U | Space |
-# +-----+-----+-----+-----------+
-# X = don't care
+# sw8 ON causes selected attribute character to be displayed
+# OFF causes SPACE to be displayed instead - Factory Setting
#
-# CHART:
-# +-----+-----+-----------------+
-# | 7 | 8 | Communication |
-# +-----+-----+-----------------+
-# | D | D | Half Duplex |
-# | D | U | Full Duplex |
-# | U | D | Block |
-# | U | U | Local |
-# +-----+-----+-----------------+
+# S4 - Interface
+# --------------
+# Modem Interface
+# S3 S4 S4 S4 S4
+# sw4 sw1 sw2 sw3 sw4
+# ---------------------------
+# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
+# Current Loop disabled - Factory Setting
+# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
+# disabled
+# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
+# Current Loop Disabled
#
-# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
-# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
-# should be present and all tvi native modes use the same string for this.
-# Finally, note that BSD has cud1=^V. -- esr)
-tvi950|televideo 950,
- OTbs, am, hs, mir, msgr, xenl, xon,
- cols#80, it#8, lines#24, xmc#1,
- acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
- cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
- fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
- invis@,
- is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
- kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
- kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
- kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
- kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
- kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
- rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
- use=adm+sgr,
+# sw5 ON disables dot stretching mode - Factory Setting
+# OFF enables dot stretching mode
+# sw6 ON enables blanking function
+# OFF enables underline function - Factory Setting
+# sw7 ON causes NULLS to be displayed as NULLS
+# OFF causes NULLS to be displayed as SPACES - Factory Setting
#
-# is for 950 with two pages adds the following:
-# set 48 line page (\E\\2)
-# place cursor at page 0, line 24, column 1 (\E-07 )
-# set local (no send) edit keys (\Ek)
+# S5 - Word Structure
+# -------------------
+# sw1 ON enables BREAK key - Factory Setting
+# OFF disables BREAK key
+# sw2 ON selects 50Hz monitor refresh rate
+# OFF selects 60Hz monitor refresh rate - Factory Setting
#
-# two page 950 adds the following:
-# when entering ex, set 24 line page (\E\\1)
-# when exiting ex, reset 48 line page (\E\\2)
-# place cursor at 0,24,1 (\E-07 )
-# set duplex (send) edit keys (\El) when entering vi
-# set local (no send) edit keys (\Ek) when exiting vi
+# Modem Port Selection
+# sw3 sw4 sw5
+# ---------------
+# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
+# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
+# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
+# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
+# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
+# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
+# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
+# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
#
-tvi950-2p|televideo950 w/2 pages,
- is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
- rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
- smkx=\El, use=tvi950,
+# sw6 ON sends bit 8 a 1 (mark)
+# OFF sends bit 8 as 0 (space) - Factory Setting
+# sw7 ON selects Block Mode
+# OFF selects Conversation Mode - Factory Setting
+# sw8 ON selects Full Duplex operation
+# OFF selects Half Duplex operation - Factory Setting
#
-# is for 950 with four pages adds the following:
-# set 96 line page (\E\\3)
-# place cursor at page 0, line 24, column 1 (\E-07 )
+# S6 - Printer
+# ------------
+# sw1, sw2, sw6, sw7 Reserved - Factory 0
#
-# four page 950 adds the following:
-# when entering ex, set 24 line page (\E\\1)
-# when exiting ex, reset 96 line page (\E\\3)
-# place cursor at 0,24,1 (\E-07 )
+# Printer Port Selection
+# same as Modem above, bit 8 (when 8 DATA bits) is always = 0
#
-tvi950-4p|televideo950 w/4 pages,
- is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
- rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
- smkx=\El, use=tvi950,
+# sw8 ON enables Printer Port
+# OFF disables Printer Port - Factory Setting
#
-# <is2> for reverse video 950 changes the following:
-# set reverse video (\Ed)
+# S7 - Polling Address
+# --------------------
+# sw1-7 Establish ASCII character which designates terminal polling address
+# ON = logic 0
+# OFF = logic 1 - Factory Setting
+# sw8 ON enables Polling Option
+# OFF disables Polling Option - Factory Setting
#
-# set vb accordingly (\Ed ...delay... \Eb)
#
-tvi950-rv|televideo950 rev video,
- flash=\Ed$<200/>\Eb,
- is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
- use=tvi950,
-
-# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
-tvi950-rv-2p|televideo950 rev video w/2 pages,
- flash=\Ed$<200/>\Eb,
- is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
- rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
- smkx=\El, use=tvi950,
-
-# tvi950-rv uses the appropriate entries from 950-4p and 950-rv
-tvi950-rv-4p|televideo950 rev video w/4 pages,
- flash=\Ed$<200/>\Eb,
- is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
- rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
- smkx=\El, use=tvi950,
-# From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
-# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
-# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
-# the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
-# the :ko: string had :cl: in it, which means that one of the original
-# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
-# the 950 has. Finally, corrected the <kel> string to match the 950 and what
-# ko implies -- esr)
-# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
-# also work.
-tvi955|televideo 955,
- OTbs, mc5i, msgr@,
- it#8, xmc@,
- acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
- civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
- cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
- is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
- knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
- rmam=\E[=7l, rmxon=^N,
- rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
- sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
- use=tvi950,
-tvi955-w|955-w|televideo955 w/132 cols,
- cols#132,
- is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
-# use half-intensity as normal mode, full intensity as <bold>
-tvi955-hb|955-hb|televideo955 half-bright,
- bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
- sgr0=\EG0\E[=5h, use=tvi955,
-# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
-# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
-# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
-# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
-# it does to the function keys. I deduced <rmam>/<smam>.
-# also added empty <acsc> to suppress tic warning, -- esr)
-tvi970|televideo 970,
- OTbs, OTpt, am, da, db, mir, msgr,
- cols#80, it#8, lines#24,
- acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
- cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
- cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
- ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
- hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
- is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
- kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
- kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
- rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
- smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
- smul=\E[4m, vpa=\E[%i%p1%dd,
-tvi970-vb|televideo 970 with visual bell,
- flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
- use=tvi970,
-tvi970-2p|televideo 970 with using 2 pages of memory,
- rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
- use=tvi970,
-# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
-# per line (rather than 40), Esc K chooses the normal character set. Not sure
-# padding is needed, but adapted from the tvi920c termcap. The <smso> and
-# <smul> strings are klutzy, but at least use no screen space.
-# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
-# its absence means <smam>=\Ev isn't safe to use. -- esr)
-# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
-# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
-# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
-tvipt|televideo personal terminal,
+# On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
+#
+# This adm31 entry uses underline as the standout mode.
+# If the adm31 gives you trouble with standout mode, check the DIP switch in
+# position 6, bank @c11, 25% from back end of the circuit board. Should be
+# OFF. If there is no such switch, you have an old adm31 and must use oadm31.
+# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
+adm31|lsi adm31 with sw6 set for underline mode,
+ OTbs, am, mir,
+ cols#80, lines#24,
+ bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=\n, is2=\Eu\E0,
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
+ kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
+ kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
+ rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
+adm31-old|o31|old adm31,
+ rmul@, smso=\EG4, smul@, use=adm31,
+# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
+adm36|LSI ADM36,
+ OTbs, OTpt,
+ OTkn#4,
+ if=/usr/share/tabset/vt100,
+ is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
+# (adm42: removed obsolete ":ma=^K^P:" -- esr)
+adm42|lsi adm42,
OTbs, am,
cols#80, lines#24,
- cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
- ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
- il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
- kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
- rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
-# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
-tvi9065|televideo 9065,
- am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
- cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
- wnum#0, wsl#30,
- acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
- blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
- cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
- cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
- cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
- dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
- el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
- ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
- il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
- ip=$<3>,
- is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
- is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
- kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
- kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
- kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
- kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
- mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
- pfkey=\E|%p1%{48}%+%c3%p2%s\031,
- pfloc=\E|%p1%{48}%+%c2%p2%s\031,
- pfx=\E|%p1%{48}%+%c1%p2%s\031,
- pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
- rep=\E[%p2%db%p1%c, rev=\EG4,
- rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
- rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
- rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
- rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
- rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
- rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
- sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?%p9%t\E$%e\E%%%;,
- sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
- smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
- tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
+ bel=^G, cbt=\EI, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
+ il1=\EE$<270>, ind=\n, invis@, ip=$<6*>, kcub1=^H, kcud1=\n,
+ kcuf1=^L, kcuu1=^K, khome=^^, pad=^?, rmir=\Er, rmul@,
+ smir=\Eq, smul@, use=adm+sgr,
+# The following termcap for the Lear Siegler ADM-42 leaves the
+# "system line" at the bottom of the screen blank (for those who
+# find it distracting otherwise)
+adm42-ns|lsi adm-42 with no system line,
+ cbt=\EI\EF \011, clear=\E;\EF \011,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
+ dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
+ el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
+ smir=\Eq\EF \011, use=adm42,
+# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
+# The insert mode of this terminal is commented out because it's broken for our
+# purposes in that it will shift the position of every character on the page,
+# not just the cursor line!
+# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
+adm1178|1178|lsi adm1178,
+ am,
+ cols#80, lines#24, xmc#1,
+ bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
+ home=^^, ht=^I, il1=\EE, ind=\n, ip=$<6*/>, kbs=^H, kcub1=^H,
+ kcud1=\n, nel=\r\n, pad=^?, rev=\EG4, rmso=\EG0, rmul=\EG0,
+ sgr0=\E), smso=\EG4, smul=\EG1,
-#### Visual (vi)
+#### Prime
#
-# In September 1993, Visual Technology of Westboro, Massachusetts,
-# merged with White Pine Software of Nashua, New Hampshire.
+# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
+# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
+# Prime merged with ComputerVision in the late 1980s; you can reach them at:
#
-# White Pine Software may be contacted at +1 603/886-9050.
-# Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
+# ComputerVision Services
+# 500 Old Connecticut Path
+# Framingham, Mass.
#
-# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
-# Recently I hacked together the following termcap for Visual
-# Technology's Visual 50 terminal. It's a slight modification of
-# the vt52 termcap.
-# It's intended to run when the Visual 50 is in vt52 emulation mode
-# (I know what you're thinking; if it's emulating a vt52, then why
-# another termcap? Well, it turns out that the Visual 50 can handle
-# <dl1> and db(?) among other things, which the vt52 can't)
-# The termcap works OK for the most part. The only problem is on
-# character inserts. The whole line gets painfully redrawn for each
-# character typed. Any suggestions?
-# Beau's entry is combined with the vi50 entry from University of Wisconsin.
-# Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
-# disguise; <kf7>-<kf9> are really l1-l3.
-vi50|visual 50,
- OTbs, OTpt, am, da, db, msgr,
- cols#80, it#8, lines#24,
- OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
- cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
- ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
- kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
- nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
-# this one was BSD & SCO's vi50
-vi50adm|visual 50 in adm3a mode,
- am, msgr,
- cols#80, it#8, lines#24,
- bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
- ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
- kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
- rmso=\ET, smso=\EU,
-# From: Jeff Siegal <jbs@quiotix.com>
-vi55|Visual 55,
- OTbs, am, mir, msgr,
+# Standout mode is dim reverse-video.
+pt100|pt200|wren|fenix|prime pt100/pt200,
+ am, bw, mir, msgr,
cols#80, it#8, lines#24,
- clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
- cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
- il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
- kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
- smir=\Ea, smso=\EU,
+ cbt=\E[Z, clear=\E?, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
+ cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
+ ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
+ home=\E$B, ht=^I, il1=\E[L\E[t, ind=\n, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=\r\n,
+ rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m,
+ smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12
+ l\E[1Q,
+ smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
+pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH, use=pt100,
+pt250|Prime PT250,
+ rmso@, smso@, use=pt100,
+pt250w|Prime PT250 in 132-column mode,
+ rmso@, smso@, use=pt100w,
-# Visual 200 from BRL
-# The following switch settings are assumed for normal operation:
-# FULL_DUPLEX SCROLL CR
-# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
-# Other switches may be set for operator convenience or communication
-# requirements.
-# Character insertion is kludged in order to get around the "beep" misfeature.
-# (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
-# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
-# and <dl1> strings, but we seem to get along fine without them.
-vi200|visual 200,
- OTbs, OTpt, am, mir, msgr,
- OTkn#10, cols#80, it#8, lines#24,
- acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
- cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
- el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
- kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
- kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
- kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
- kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
- rmacs=\EG, rmkx=\E>, rmso=\E3,
- rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
- smkx=\E=, smso=\E4, tbc=\Eg,
-# The older Visuals didn't come with function keys. This entry uses
-# <smkx> and <rmkx> so that the keypad keys can be used as function keys.
-# If your version of vi doesn't support function keys you may want
-# to use vi200-f.
-vi200-f|visual 200 no function keys,
- is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
- kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
- kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
- use=vi200,
-vi200-rv|visual 200 reverse video,
- cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
+#### Qume (qvt)
+#
+# Qume, Inc.
+# 3475-A North 1st Street
+# San Jose CA 95134
+# Vox: (800)-457-4447
+# Fax: (408)-473-1510
+# Net: josed@techsupp.wyse.com (Jose D'Oliveira)
+#
+# Qume was bought by Wyse, but still (as of early 1995) has its own support
+# group and production division.
+#
+# Discontinued Qume models:
+#
+# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
+# built to replace them, and a qvt119+ which was a 101+ with available wide
+# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
+# and an ANSI-compatible qvt203 that replaced it. Qume started producing
+# ANSI-compatible terminals with the qvt323 and qvt61.
+#
+# Current Qume models (as of February 1995):
+#
+# All current Qume terminals have ANSI-compatible operation modes.
+# Qume is still producing the qvt62, which features emulations for other
+# popular lines such as ADDS, and dual-host capabilities. The qvt82 is
+# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
+# with many emulations including Wyse370, Wyse 325, etc. Their newest
+# model is the qvt520, which is vt420-compatible.
+#
+# There are some ancient printing Qume terminals under `Daisy Wheel Printers'
+#
+# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
+# setup mode. Shift-s should be a configuration save to NVRAM.
-# the function keys are programmable but we don't reprogram them to their
-# default values with <is2> because programming them is very verbose. maybe
-# an initialization file should be made for the 300 and they could be stuck
-# in it.
-# (vi300: added <rmam>/<smam> based on init string -- esr)
-vi300|visual 300 ansi x3.64,
- am, bw, mir, xenl,
- cols#80, lines#24,
- bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
- dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
- il1=\E[L, ind=^J,
- is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
- kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
- kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
- rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
- smso=\E[1m, smul=\E[4m,
-# some of the vi300s have older firmware that has the command
-# sequence for setting editing extent reversed.
-vi300-old|visual 300 with old firmware (set edit extent reversed),
- is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
- use=vi300,
-
-# Visual 500 prototype entry from University of Wisconsin.
-# The best place to look for the escape sequences is page A1-1 of the
-# Visual 500 manual. The initialization sequence given here may be
-# overkill, but it does leave out some of the initializations which can
-# be done with the menus in set-up mode.
-# The :xp: line below is so that emacs can understand the padding requirements
-# of this slow terminal. :xp: is 10 time the padding factor.
-# (vi500: removed unknown :xp#4: termcap;
-# also added empty <acsc> to suppress tic warning -- esr)
-vi500|visual 500,
- am, mir, msgr,
- cols#80, it#8, lines#33,
- acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
- csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
- cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
- dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
- el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
- ind=^J,
- is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
- kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
- rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
-
-# The visual 550 is a visual 300 with tektronix graphics,
-# and with 33 lines. clear screen is modified here to
-# also clear the graphics.
-vi550|visual 550 ansi x3.64,
- lines#33,
- clear=\030\E[H\E[2J, use=vi300,
-
-vi603|visual603|visual 603,
- hs, mir,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
- csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
- dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
- ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
- rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
- sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
- use=vt100,
+qvt101|qvt108|qume qvt 101 and QVT 108,
+ xmc#1, use=qvt101+,
-#### Wyse (wy)
+# This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
+# file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
+# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
+# What seems to be going on here is that this entry was designed so that
+# the normal highlight is bold and standout is dim plus something else
+# (reverse-video maybe? But then, are there two <rev> sequences?)
#
-# Wyse Technology
-# 3471 North First Street
-# San Jose, CA 95134
-# Vox: (408)-473-1200
-# Fax: (408) 473-1222
-# Web: http://www.wyse.com
+# Added kdch1, kil1, kdl1 based on screenshot -TD:
+# http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
+qvt101+|qvt101p|qume qvt 101 PLUS product,
+ am, bw, hs, ul,
+ cols#80, lines#24, xmc#0,
+ bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=\n,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
+ flash=\Eb$<200>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
+ ich1=\EQ, il1=\EE, ind=\n, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
+ kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
+ kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
+ kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
+ kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
+ rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
+qvt102|qume qvt 102,
+ cnorm=\E., use=qvt101,
+# (qvt103: added <rmam>/<smam> based on init string -- esr)
+qvt103|qume qvt 103,
+ am, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[2J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
+ hts=\EH, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
+ rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
+ rmso=\E[m$<2>, rmul=\E[m$<2>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
+ %;m$<2>,
+ sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+qvt103-w|qume qvt103 132 cols,
+ cols#132, lines#24,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
+qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
+ am, hs, mir, msgr,
+ cols#80, lines#24, xmc#0,
+ bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=\r, cub1=^H,
+ cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
+ el=\Et, flash=\En0$<200>\En1, fsl=\r, home=^^, ht=^I,
+ hts=\E1, il1=\EE, ind=\n, is2=\EDF\EC\EG0\Er\E(\E%EX,
+ kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
+ kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
+ tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
+qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
+ lines#25, use=qvt119+,
+qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
+ cols#132,
+ is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
+qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
+ lines#25, use=qvt119+,
+qvt203|qvt203+|qume qvt 203 Plus,
+ dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
+ ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
+ kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
+ kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
+qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
+ cols#132, lines#24,
+ rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
#
-# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
-# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
-# obvious address, <http://www.wyse.com>. They keep terminfo entries at
-# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
+# Since a command is present for enabling 25 data lines,
+# a specific terminfo entry may be generated for the 203.
+# If one is desired for the QVT 119 PLUS then 25 lines must
+# be selected in the status line (setup line 9).
#
-# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
-# They now own the Qume and Amdek brands, too. So these are the people to
-# talk with about all Link, Qume, and Amdek terminals.
+qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
+ cols#80, lines#25,
+ is2=\E[=40h\E[?3l, use=qvt203,
+qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
+ cols#132, lines#25,
+ rs2=\E[?3h\E[=40h, use=qvt203,
+
+#### Televideo (tvi)
#
-# These entries include a few small fixes.
-# I canceled the bel capacities in the vb entries.
-# I made two trivial syntax fixes in the wyse30 entry.
-# I made some entries relative to adm+sgr.
+# TeleVideo
+# 550 East Brokaw Road
+# PO Box 49048 95161
+# San Jose CA 95112
+# Vox: (408)-954-8333
+# Fax: (408)-954-0623
#
#
-# Note: The wyse75, wyse85, and wyse99 have been discontinued.
+# These require incredible amounts of padding.
+#
+# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
+# Televideo terminals are ANSI and PC-ANSI compatible.
-# Although the Wyse 30 can support more than one attribute
-# it requires magic cookies to do so. Many applications do not
-# function well with magic cookies. The following terminfo uses
-# the protect mode to support one attribute (dim) without cookies.
-# If more than one attribute is needed then the wy30-mc terminfo
-# should be used.
+tvi803|televideo 803,
+ clear=\E*$<10>, use=tvi950,
+
+# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
+# Switch settings are:
#
-wy30|wyse30|Wyse 30,
- am, bw, hs, mc5i, mir, msgr, xon,
- cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
- acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
- civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
- cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
- dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
- fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
- ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
- kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
- kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
- kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
- kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
- kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
- mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
- pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
- rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
- sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
- sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
- smso=\E`7\E), tbc=\E0, tsl=\EF,
+# S1 1 2 3 4
+# D D D D 9600
+# D D D U 50
+# D D U D 75
+# D D U U 110
+# D U D D 135
+# D U D U 150
+# D U U D 300
+# D U U U 600
+# U D D D 1200
+# U D D U 1800
+# U D U D 2400
+# U D U U 3600
+# U U D D 4800
+# U U D U 7200
+# U U U D 9600
+# U U U U 19200
#
-# This terminal description uses the non-hidden attribute mode
-# (with magic cookie).
+# S1 5 6 7 8
+# U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
+# U D X U 7N2
+# U U D D 7O1
+# U U D U 7O2
+# U U U D 7E1
+# U U U U 7E2
+# D D X D 8N1
+# D D X U 8N2
+# D U D D 8O1
+# D U U U 8E2
#
-# (wy30-mc: added <smcup> to suppress tic warning --esr)
-wy30-mc|wyse30-mc|wyse 30 with magic cookies,
- msgr@,
- ma@, xmc#1,
- blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
- rmcup=\EG0, rmso=\EG0,
- sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
- sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
- smso=\EG4, use=wy30, use=adm+sgr,
-# The mandatory pause used by <flash> does not work with
-# older versions of terminfo. If you see this effect then
-# unset xon and delete the / from the delay.
-# i.e. change $<100/> to $<100>
-wy30-vb|wyse30-vb|wyse 30 visible bell,
- bel@, use=wy30,
+# S1 9 Autowrap
+# U on
+# D off
#
-# The Wyse 50 can support one attribute (e.g. Dim, Inverse,
-# Normal) without magic cookies by using the protect mode.
-# The following description uses this feature, but when more
-# than one attribute is put on the screen at once, all attributes
-# will be changed to be the same as the last attribute given.
-# The Wyse 50 can support more attributes when used with magic
-# cookies. The wy50-mc terminal description uses magic cookies
-# to correctly handle multiple attributes on a screen.
+# S1 10 CR/LF
+# U do CR/LF when CR received
+# D do CR when CR received
#
-wy50|wyse50|Wyse 50,
- am, bw, hs, mc5i, mir, msgr, xon,
- cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
- acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
- civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
- cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
- ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
- home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
- is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
- kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
- kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
- kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
- kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
- kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
- kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
- ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
- pfx=\Ez%p1%{63}%+%c%p2%s\177,
- pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
- ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
- sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
- sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
- smso=\E`6\E), tbc=\E0, tsl=\EF,
+# S2 1 Mode
+# U block
+# D conversational
#
-# This terminal description uses the non-hidden attribute mode
-# (with magic cookie).
+# S2 2 Duplex
+# U half
+# D full
#
-# The mandatory pause used by flash does not work with some
-# older versions of terminfo. If you see this effect then
-# unset <xon> and delete the / from the delay.
-# i.e. change $<100/> to $<100>
-# (wy50-mc: added <smcup> to suppress tic warning --esr)
-wy50-mc|wyse50-mc|wyse 50 with magic cookies,
- msgr@,
- ma@, xmc#1,
- blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
- rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
- sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
- sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
- smso=\EGt, use=wy50, use=adm+sgr,
-wy50-vb|wyse50-vb|wyse 50 visible bell,
- bel@, use=wy50,
-wy50-w|wyse50-w|wyse 50 132-column,
- cols#132, lw#7, nlab#16, wsl#97,
- cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
- use=wy50,
-wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
- bel@, use=wy50-w,
-
+# S2 3 Hertz
+# U 50
+# D 60
#
-# The Wyse 350 is a Wyse 50 with color.
-# Unfortunately this means that it has magic cookies.
-# The color attributes are designed to overlap the reverse, dim and
-# underline attributes. This is nice for monochrome applications
-# because you can make underline stuff green (or any other color)
-# but for true color applications it's not so hot because you cannot
-# mix color with reverse, dim or underline.
-# To further complicate things one of the attributes must be
-# black (either the foreground or the background). In reverse video
-# the background changes color with black letters. In normal video
-# the foreground changes colors on a black background.
-# This terminfo uses some of the more advanced features of curses
-# to display both color and blink. In the final analysis I am not
-# sure that the wy350 runs better with this terminfo than it does
-# with the wy50 terminfo (with user adjusted colors).
+# S2 4 Edit mode
+# U local
+# D duplex
#
-# The mandatory pause used by flash does not work with
-# older versions of terminfo. If you see this effect then
-# unset xon and delete the / from the delay.
-# i.e. change $<100/> to $<100>
+# S2 5 Cursor type
+# U underline
+# D block
#
-# Bug: The <op> capability resets attributes.
-wy350|wyse350|Wyse 350,
- am, bw, hs, mc5i, mir, xon,
- colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
- wsl#45, xmc#1,
- acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
- cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
- cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
- dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
- flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
- il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
- is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
- kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
- ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
- kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
- kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
- kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
- kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
- ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
- pfx=\Ez%p1%{63}%+%c%p2%s\177,
- pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
- rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
- setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
- sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
- sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
- smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
-wy350-vb|wyse350-vb|wyse 350 visible bell,
- bel@, use=wy350,
-wy350-w|wyse350-w|wyse 350 132-column,
- cols#132, lw#7, nlab#16, wsl#97,
- cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
- use=wy350,
-wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
- bel@, use=wy350-w,
+# S2 6 Cursor down key
+# U send ^J
+# D send ^V
#
-# This terminfo description is untested.
-# The wyse100 emulates an adm31, so the adm31 entry should work.
+# S2 7 Screen colour
+# U green on black
+# D black on green
#
-wy100|wyse 100,
- hs, mir,
- cols#80, lines#24, xmc#1,
- bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
- invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
- kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
- kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
- rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
+# S2 8 DSR status (pin 6)
+# U disconnected
+# D connected
#
-# The Wyse 120/150 has most of the features of the Wyse 60.
-# This terminal does not need padding up to 9600 baud!
-# <msgr> should be set but the clear screen fails when in
-# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
-# then set <msgr>.
+# S2 9 DCD status (pin 8)
+# U disconnected
+# D duplex
#
-wy120|wyse120|wy150|wyse150|Wyse 120/150,
- am, bw, hs, km, mc5i, mir, msgr, xon,
- cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
- acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
- bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
- cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
- dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
- flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
- hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
- is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
- is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
- kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
- kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
- kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+# S2 10 DTR status (pin 20)
+# U disconnected
+# D duplex
+# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
+# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
+tvi910|televideo model 910,
+ OTbs, am, msgr,
+ cols#80, it#8, lines#24, xmc#1,
+ bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
+ home=\E=^A^A, hpa=\E]%p1%{32}%+%c, ht=^I,
+ if=/usr/share/tabset/stdcrt, ind=\n, invis@, kbs=^H,
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
- kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
- kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
- mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
- pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
- pfx=\EZ1%p1%{63}%+%c%p2%s\177,
- pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
- rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
- rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
- rs3=\EwG\Ee($<100>,
- sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
- sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
- smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
- tbc=\E0, tsl=\EF, use=adm+sgr,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ vpa=\E[%p1%{32}%+%c, use=adm+sgr,
+# From: Alan R. Rogers <rogers%albany@csnet-relay>
+# as subsequently hacked over by someone at SCO
+# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
#
-wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
- cols#132, lw#7, nlab#16, wsl#97,
- cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
- rs2=\E`;$<70>, use=wy120,
+# Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
#
-wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
- lh@, lines#25, lw@, nlab@,
- pln@, rs3=\EwG\Ee)$<100>, use=wy120,
+# S1 1 2 3 4:
+# D D D D 9600 D D D U 50 D D U D 75 D D U U 110
+# D U D D 135 D U D U 150 D U U D 300 D U U U 600
+# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
+# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
#
-wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
- lh@, lines#25, lw@, nlab@,
- pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
+# S1 5 6 7 8:
+# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
+# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
+# D U D D 8O1 D U U U 8E2
#
-wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
- bel@, use=wy120,
+# S1 9 Autowrap (U = on, D = off)
+# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
+# S2 1 Mode (U = block, D = conversational)
+# S2 2 Duplex (U = half, D = full)
+# S2 3 Hertz (U = 50, D = 60)
+# S2 4 Edit mode (U = local, D = duplex)
+# S2 5 Cursor type (U = underline, D = block)
+# S2 6 Cursor down key (U = send ^J, D = send ^V)
+# S2 7 Screen colour (U = green on black, D = black on green)
+# S2 8 DSR status (pin 6) (U = disconnected, D = connected)
+# S2 9 DCD status (pin 8) (U = disconnected, D = connected)
+# S2 10 DTR status (pin 20) (U = disconnected, D = connected)
#
-wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
- bel@, use=wy120-w,
+tvi910+|televideo 910+,
+ dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
+ kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
+ kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
+ ll=\E=7\s, use=tvi910,
+
+# (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
+# <khome> from BRL entry -- esr)
+tvi912|tvi914|tvi920|old televideo 912/914/920,
+ OTbs, OTpt, am, msgr,
+ cols#80, it#8, lines#24, xmc#1,
+ bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
+ ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
+ il1=\EE$<33*>, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
+ kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
+ kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
+ kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
+ tbc=\E3,
+# We got some new tvi912c terminals that act really weird on the regular
+# termcap, so one of our gurus worked this up. Seems that cursor
+# addressing is broken.
+tvi912cc|tvi912 at cowell college,
+ cup@, use=tvi912c,
+
+# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
+# From: Benjamin C. W. Sittler
#
-# The Wyse 60 is like the Wyse 50 but with more padding.
-# The reset strings are slow and the pad times very depending
-# on other parameters such as font loading. I have tried
-# to follow the following outline:
+# Someone has put a scanned copy of the manual online at:
+# http://vt100.net/televideo/912b-om/
+# (https://vt100.net/manx/details/6,5484)
#
-# <rs1> -> set personality
-# <rs2> -> set number of columns
-# <rs3> -> set number of lines
-# <is1> -> select the proper font
-# <is2> -> do the initialization
-# <is3> -> set up display memory (2 pages)
+# These terminals were produced ca. 1979, and had a 12" monochrome
+# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit
+# ASCII, and were generally similar to adm3a but with attributes
+# (including some with magic cookies), fancy half-duplex mode, and
+# different bugs.
#
-# The Wyse 60's that have vt100 emulation are slower than the
-# older Wyse 60's. This change happened mid-1987.
-# The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
+# Some operations require truly incredible amounts of padding. The
+# insert_line (<il1>) and delete_line (<dl1>) operations in particular
+# are so slow as to be nearly unusable.
#
-# The meta key is only half right. This terminal will return the
-# high order bit set when you hit CTRL-function_key
+# There may or may not have been a separate, earlier series of 912/920
+# terminals (without the "B" and "C" suffix); I have never seen one,
+# and the manual only describes the "B" and "C" series. The 912 and 920
+# are quite distinct from the 914 and 924, which were much nicer non-
+# magic-cookie terminals similar to the 950.
#
-# It may be useful to assign two function keys with the
-# values \E=(\s look at old data in page 1
-# \E=W, look at bottom of page 1
-# where \s is a space ( ).
+# This is a new description for the following TeleVideo terminals,
+# distinguished chiefly by their keyboards:
#
-# Note:
-# The Wyse 60 runs faster when the XON/XOFF
-# handshake is turned off.
+# TVI-912B - very odd layout, no function keys (84 keys)
+# TVI-920B - typewriter layout, no function keys (103 keys)
+# TVI-912C - very odd layout, function keys F1-F11 (82 keys)
+# TVI-920C - typewriter layout, function keys F1-F11 (101 keys)
#
-# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
-# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
-wy60|wyse60|Wyse 60,
- am, bw, hs, km, mc5i, mir, msgr,
- cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
- acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
- bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
- cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
- ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
- home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
- ip=$<3>, is1=\EcB0\EcC1,
- is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
- is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
- kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
- kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
- kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
- kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
- kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
- kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
- mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
- pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
- pfx=\EZ1%p1%{63}%+%c%p2%s\177,
- pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
- rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
- rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
- rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
- sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
- sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
- smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
- tbc=\E0, tsl=\EF, use=adm+sgr,
+# To choose a setting for the TERM variable, start with the model:
#
-wy60-w|wyse60-w|wyse 60 132-column,
- cols#132, lw#7, nlab#16, wsl#97,
- cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
- rs2=\EeF$<150>\E`;$<150>, use=wy60,
+# Model || base name
+# ----------||-----------
+# TVI-912B || tvi912b
+# TVI-912C || tvi912c
+# TVI-920B || tvi920b
+# TVI-920C || tvi920c
#
-wy60-25|wyse60-25|wyse 60 80-column 25-lines,
- lh@, lines#25, lw@, nlab@,
- pln@, rs3=\EwG\Ee)$<200>, use=wy60,
-wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
- lh@, lines#25, lw@, nlab@,
- pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
+# Then add a suffix from the following table describing installed options
+# and how you'd like to use the terminal:
#
-wy60-42|wyse60-42|wyse 60 80-column 42-lines,
- lines#42,
- clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
- dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
- ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
- ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
-wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
- cols#132, lw#7, nlab#16, wsl#97,
- clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
- dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
- nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
+# Use Video | Second | Visual | Magic | Page || feature
+# Attributes | Page | Bell | Cookies | Print || suffix
+# ------------|--------|--------|---------|-------||---------
+# No | No | N/A | N/A | No || -unk
+# No | No | N/A | N/A | Yes || -p
+# No | Yes | No | N/A | No || -2p-unk
+# No | Yes | No | N/A | Yes || -2p-p
+# No | Yes | Yes | N/A | No || -vb-unk
+# No | Yes | Yes | N/A | Yes || -vb-p
+# Yes | No | N/A | No | N/A ||
+# Yes | No | N/A | Yes | N/A || -mc
+# Yes | Yes | No | No | N/A || -2p
+# Yes | Yes | No | Yes | N/A || -2p-mc
+# Yes | Yes | Yes | No | N/A || -vb
+# Yes | Yes | Yes | Yes | N/A || -vb-mc
#
-wy60-43|wyse60-43|wyse 60 80-column 43-lines,
- lh@, lines#43, lw@, nlab@,
- pln@, rs3=\Ee+$<150>, use=wy60-42,
-wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
- lh@, lines#43, lw@, nlab@,
- pln@, rs3=\Ee+$<150>, use=wy60-42-w,
+# So e.g. a model 920 C with second page memory option, visual bell
+# and no magic cookies would be tvi920c-vb; a model 912 B without the
+# second page memory option and using magic cookies would be
+# tvi912b-mc
#
-wy60-vb|wyse60-vb|Wyse 60 visible bell,
- bel@, use=wy60,
-wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
- bel@, use=wy60-w,
-
-# The Wyse-99GT looks at lot like the Wyse 60 except that it
-# does not have the 42/43 line mode. In the Wyse-60 the "lines"
-# setup parameter controls the number of lines on the screen.
-# For the Wyse 99GT the "lines" setup parameter controls the
-# number of lines in a page. The screen can display 25 lines max.
-# The Wyse-99GT also has personalities for the VT220 and
-# Tektronix 4014. But this has no bearing on the native mode.
+# PADDING
#
-# (msgr) should be set but the clear screen fails when in
-# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
-# then set msgr, else use msgr@.
+# At 9600 baud, the terminal is prone to overflow its input buffer
+# during complex operations (insert/delete
+# character/line/screen/page), and it does not signal this over the
+# RS232 cable. The typical symptom of an overrun is that the terminal
+# starts beeping, and output becomes garbled.
#
-# u0 -> enter Tektronix mode
-# u1 -> exit Tektronix mode
+# The padding delays in this terminfo were derived using tack(1)
+# running on a Linux box connected to a TVI-920C with a later-model
+# (A49C1-style) ROM running at 9600 baud, so your mileage may
+# vary. The numbers below seem to give the terminal enough time so
+# that it doesn't overflow its input buffer and start losing
+# characters.
#
-wy99gt|wyse99gt|Wyse 99gt,
- msgr@,
- clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
- el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
- il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
- ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
- u0=\E~>\E8, u1=\E[42h, use=wy60,
+# KEYS
#
-wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
- cols#132, lw#7, nlab#16, wsl#97,
- clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
- dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
- use=wy99gt,
+# If you want to use the FUNCT key on a tvi912[bc], use the
+# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from
+# the following table (these also work on the 920 series):
#
-wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
- lh@, lines#25, lw@, nlab@,
- pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
+# Unshifted Function Keys:
#
-wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
- lh@, lines#25, lw@, nlab@,
- pln@, rs2=\E`;$<150>, use=wy99gt-w,
+# Key | capname|| Equivalent
+# -----|--------||------------
+# F1 | <kf1> || FUNCT + @
+# F2 | <kf2> || FUNCT + A
+# F3 | <kf3> || FUNCT + B
+# F4 | <kf4> || FUNCT + C
+# F5 | <kf5> || FUNCT + D
+# F6 | <kf6> || FUNCT + E
+# F7 | <kf7> || FUNCT + F
+# F8 | <kf8> || FUNCT + G
+# F9 | <kf9> || FUNCT + H
+# F10 | <kf10> || FUNCT + I
+# F11 | <kf11> || FUNCT + J
#
-wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
- bel@, use=wy99gt,
+# Shifted Function Keys:
#
-wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
- bel@, use=wy99gt-w,
-
-# Can't set tabs! Other bugs (ANSI mode only):
-# - can't redefine function keys (anyway, key redefinition in ANSI mode
-# is too much complex to be described);
-# - meta key can't be described (the terminal forgets it when reset);
-# The xon-xoff handshaking can't be disabled while in ansi personality, so
-# emacs can't work at speed greater than 9600 baud. No padding is needed at
-# this speed.
-# dch1 has been commented out because it causes annoying glittering when
-# vi deletes one character at the beginning of a line with tabs in it.
-# dch makes sysgen(1M) have a horrible behaviour when deleting
-# a screen and makes screen(1) behave badly, so it is disabled too. The nice
-# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
-# not, so smir and rmir are commented out as well.
-# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
-wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
- am, km, mc5i, mir, msgr, xenl,
- cols#80, it#8, lines#25, vt#3,
- acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
- cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
- cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
- cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
- ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
- enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
- hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
- il1=\E[L, ind=\n$<1>, invis=\E[8m,
- is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
- kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
- kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
- kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
- kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
- kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
- mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
- rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
- rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
- rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
- sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
- sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
-
-# This is the american terminal. Here tabs work fine.
-# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
-wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
- hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
-
-# This terminal (firmware version 02) has a lot of bugs:
-# - can't set tabs;
-# - other bugs in ANSI modes (see above).
-# This description disables handshaking when using cup. This is because
-# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
-# cannot be used at speeds greater than 9600 baud, because at greater
-# speeds handshaking is needed even for character sending. If you use
-# DTR handshaking, you can use even greater speeds.
-# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
-wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
- am, bw, hs, km, mc5i, mir, msgr, xon,
- cols#80, it#8, lines#25, wsl#46,
- acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
- blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
- cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
- ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
- flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
- ind=^J, invis=\EG3,
- is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
- ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
- kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
- kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
- kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
- kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
- kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
- kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
- nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
- rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
- rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
- sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
- sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
- smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
-
-# This is the american terminal. Here tabs work.
-# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
-wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
- hts=\E1, tbc=\E0, use=wy99f,
-
+# SHIFT + Key | capname|| Equivalent
+# -------------|--------||------------
+# SHIFT + F1 | <kf12> || FUNCT + `
+# SHIFT + F2 | <kf13> || FUNCT + a
+# SHIFT + F3 | <kf14> || FUNCT + b
+# SHIFT + F4 | <kf15> || FUNCT + c
+# SHIFT + F5 | <kf16> || FUNCT + d
+# SHIFT + F6 | <kf17> || FUNCT + e
+# SHIFT + F7 | <kf18> || FUNCT + f
+# SHIFT + F8 | <kf19> || FUNCT + g
+# SHIFT + F9 | <kf20> || FUNCT + h
+# SHIFT + F10 | <kf21> || FUNCT + i
+# SHIFT + F11 | <kf22> || FUNCT + j
#
-# The Wyse 160 is combination of the WY-60 and the WY-99gt.
-# The reset strings are slow and the pad times very depending
-# on other parameters such as font loading. I have tried
-# to follow the following outline:
+# PORTS AND SWITCH SETTINGS
#
-# <rs1> -> set personality
-# <rs2> -> set number of columns
-# <rs3> -> set number of lines
-# <is1> -> select the proper font
-# <is2> -> do the initialization
-# <is3> -> set up display memory (2 pages)
+# Here are the switch settings for the TVI-912B/TVI-920B and
+# TVI-912C/TVI-920C:
#
-# The display memory may be used for either text or graphics.
-# When "Display Memory = Shared" the terminal will have more pages
-# but garbage may be left on the screen when you switch from
-# graphics to text. If "Display Memory = Unshared" then the
-# text area will be only one page long.
+# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
+# 2: 9600 3: 4800 4: 2400 5: 1200
+# 6: 600 7: 300 8: 150 9: 75
+# 10: 110
#
-# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
-# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
-wy160|wyse160|Wyse 160,
- am, bw, hs, km, mc5i, mir, msgr,
- cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
- acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
- bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
- cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
- dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
- el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
- hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
- is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
- is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
- kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
- kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
- kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
- kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
- kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
- kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
- mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
- pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
- pfx=\EZ1%p1%{63}%+%c%p2%s\177,
- pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
- rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
- rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
- rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
- sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
- sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
- smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
- tbc=\E0, tsl=\EF, use=adm+sgr,
+# S2 UART/Terminal options:
+# Up Down
+# 1: Not used Not allowed
+# 2: Alternate character set Standard character set
+# 3: Full duplex Half duplex
+# 4: 50 Hz refresh 60 Hz refresh
+# 5: No parity Send parity
+# 6: 2 stop bits 1 stop bit
+# 7: 8 data bits 7 data bits
+# 8: Not used Not allowed on Rev E or lower
+# 9: Even parity Odd parity
+# 10: Steady cursor Blinking cursor
+# (On Rev E or lower, use W25 instead of switch 10.)
#
-wy160-w|wyse160-w|wyse 160 132-column,
- cols#132, lw#7, nlab#16, wsl#90,
- cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
- rs2=\EeF$<150>\E`;$<150>, use=wy160,
+# S5 UART/Terminal options:
+# Open Closed
+# 1: P3-6 Not connected DSR received on P3-6
+# 2: P3-8 Not connected DCD received on P3-8
#
-wy160-25|wyse160-25|wyse 160 80-column 25-lines,
- lh@, lines#25, lw@, nlab@,
- pln@, rs3=\EwG\Ee)$<200>, use=wy160,
-wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
- lh@, lines#25, lw@, nlab@,
- pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
+# 3 Open, 4 Open: P3-20 Not connected
+# 3 Open, 4 Closed: DTR on when terminal is on
+# 3 Closed, 4 Open: DTR is connected to RTS
+# 3 Closed, 4 Closed: Not allowed
#
-wy160-42|wyse160-42|wyse 160 80-column 42-lines,
- lines#42,
- clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
- ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
- rs3=\Ee*$<150>, use=wy160,
-wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
- cols#132, lw#7, nlab#16, wsl#90,
- cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
- rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
+# 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
+# all data transmitted out of the modem port (P3) will also be
+# transmitted out of the printer port (P4).
#
-wy160-43|wyse160-43|wyse 160 80-column 43-lines,
- lh@, lines#43, lw@, nlab@,
- pln@, rs3=\Ee+$<150>, use=wy160-42,
-wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
- lh@, lines#43, lw@, nlab@,
- pln@, rs3=\Ee+$<150>, use=wy160-42-w,
+# 6 Open, 7 Open: Not allowed
+# 6 Open, 7 Closed: 20ma current loop input
+# 6 Closed, 7 Open: RS232 input
+# 6 Closed, 7 Closed: Not allowed
#
-wy160-vb|wyse160-vb|Wyse 160 visible bell,
- bel@, use=wy160,
-wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
- bel@, use=wy160-w,
+# Jumper options:
+# If the jumper is installed, the effect will occur (the next time the terminal
+# is switched on).
#
-# The Wyse 75 is a vt100 lookalike without advanced video.
+# S4/W31: Enables automatic LF upon receipt of CR from
+# remote or keyboard.
+# S4/W32: Enables transmission of EOT at the end of Send. If not
+# installed, a carriage return is sent.
+# S4/W33: Disables automatic carriage return in column 80.
+# S4/W34: Selects Page Print Mode as initial condition. If not
+# installed, Extension Mode is selected.
#
-# The Wyse 75 can support one attribute (e.g. Dim, Inverse,
-# Underline) without magic cookies. The following description
-# uses this capability, but when more than one attribute is
-# put on the screen at once, all attributes will be changed
-# to be the same as the last attribute given.
-# The Wyse 75 can support more attributes when used with magic
-# cookies. The wy75-mc terminal description uses magic cookies
-# to correctly handle multiple attributes on a screen.
+# NON-STANDARD CAPABILITIES
#
-wy75|wyse75|wyse 75,
- am, hs, mc5i, mir, msgr, xenl, xon,
- cols#80, lines#24, ma#1, pb#1201, wsl#78,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
- cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
- dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
- dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
- ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
- enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
- home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
- ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
- ind=\n$<2>, ip=$<1>,
- is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
- is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
- kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
- kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
- kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
- kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
- kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
- khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
- kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
- mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
- rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
- rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
- sc=\E7,
- sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
- tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
+# Sending <u9> or <u7> returns a cursor position report in the format
+# YX\r, where Y and X are as in <cup>. This format is described in
+# <u8> and <u6>, but it's not clear how one should write an
+# appropriate scanf string, since we need to subtract %' ' from the
+# character after reading it. The <u9> capability is used by tack(1)
+# to synchronize during padding tests, and seems to work for that
+# purpose.
#
-# This terminal description uses the non-hidden attribute mode
-# (with magic cookie).
+# This description also includes the obsolete termcap capabilities
+# has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>).
#
-wy75-mc|wyse75-mc|wyse 75 with magic cookies,
- msgr@,
- ma@, xmc#1,
- blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
- rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
- sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
- sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
- use=wy75,
-wy75-vb|wyse75-vb|wyse 75 with visible bell,
- pb@,
- bel@, use=wy75,
-wy75-w|wyse75-w|wyse 75 in 132 column mode,
- cols#132, wsl#130,
- rs2=\E[35h\E[?3h$<80>, use=wy75,
-wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
- pb@,
- bel@, use=wy75-w,
+# FEATURES NOT YET DESCRIBED IN THIS TERMINFO
#
-# Wyse 85 emulating a vt220 7 bit mode.
-# 24 line screen with status line.
+# The FUNCT modifier actually works with every normal key by sending
+# ^AX\r, where X is the sequence normally sent by that key. This is a
+# sort of meta key not currently describable in terminfo.
#
-# The vt220 mode permits more function keys but it wipes out
-# the escape key. I strongly recommend that <f11> be set to
-# escape (esc).
-# The terminal may have to be set for 8 data bits and 2 stop
-# bits for the arrow keys to work.
-# The Wyse 85 runs faster with XON/XOFF enabled. Also the
-# <dch> and <ich> work best when XON/XOFF is set. <ich> and
-# <dch> leave trash on the screen when used without XON/XOFF.
+# There are quite a few other keys (especially on the 920 models,) but
+# they are for the most part only useful in block mode.
#
-wy85|wyse85|wyse 85,
- am, hs, mc5i, mir, msgr, xenl, xon,
- cols#80, it#8, lines#24, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
- dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
- ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
- enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
- fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
- ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
- ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
- is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
- is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
- kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
- kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
- khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
- kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
- mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
- rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
- rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
- rs3=\E[?5l, sc=\E7,
- sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
+# These terminals have lots of forms manipulation features, mainly
+# useful in block mode, including "clear X to nulls" (vs. "clear X to
+# spaces"; nulls are sentinels for "send X" operations); "send X"
+# operations for uploading all or part of the screen; and block-mode
+# editing keys (they don't send escape sequences, but manipulate video
+# memory directly). Block mode is used for local editing, and protect
+# mode (in conjunction with the "write protect" attribute,
+# a.k.a. half-intensity outside of protect mode) is used to control
+# which parts of the screen are edited/sent/printed (by <mc0>).
#
-# Wyse 85 with visual bell.
-wy85-vb|wyse85-vb|wyse 85 with visible bell,
- bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
+# There are at least two major families of ROM, "early" and
+# A49B1/A49C1; the major difference seems to be that the latter ROMs
+# support a few extra escape sequences for manipulating the off-screen
+# memory page, and for sending whole pages back to the host (mainly
+# useful in block mode.) The descriptions in this file don't use any
+# of those sequences: set cursor position including page (\E-PYX,
+# where P is \s for page 0 and ! for page 1 [actually only the LSB of
+# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are
+# as in <cup>); read cursor position (\E/), which is analogous to <u9>
+# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX
+# are as in <cup>, and some "send page" features mainly useful for
+# forms manipulation.
#
-# Wyse 85 in 132-column mode.
-wy85-w|wyse85-w|wyse 85 in 132-column mode,
- cols#132, wsl#132,
- rs2=\E[35h\E[?3h$<70>, use=wy85,
+# The keyboard enable (\E") and disable (\E#) sequences are unused,
+# except that a terminal reset (<is2>) enables the keyboard.
#
-# Wyse 85 in 132-column mode with visual bell.
-wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
- bel@, use=wy85-w,
-
-# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
-# This copes with an apparent firmware bug in the wy85. He writes:
-# "What I did was change leave the terminal cursor keys set to Normal
-# (instead of application), and change \E[ to \233 for all the keys in
-# terminfo. At one point, I found some reference indicating that this
-# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
-# me), but I can't find that and the server under my bookmark to "Wyse
-# Technical" isn't responding. So there's the question of wether the wy85
-# terminfo should reflect the manufactuer's intended behaviour of the terminal
-# or the actual."
-wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
- am, hs, mc5i, mir, msgr, xenl, xon,
- cols#80, it#8, lines#24, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
- dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
- ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
- enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
- fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
- ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
- ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
- is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
- is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
- kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
- kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
- kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
- kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
- kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
- kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
- kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
- khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
- kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
- mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
- rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
- rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
- rs3=\E[?5l, sc=\E7,
- sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E[40h\E7\E[25;%i%p1%dH,
+# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew)
+# enabled in <is2>, but auto-flip is very jarring so we don't use it.
#
-# Wyse 185 emulating a vt320 7 bit mode.
+# BUGS
#
-# This terminal always displays 25 lines. These lines may be used
-# as 24 data lines and a terminal status line (top or bottom) or
-# 25 data lines. The 48 and 50 line modes change the page size
-# and not the number of lines on the screen.
+# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed
+# sequences (I infer that in some TeleVideo terminal they may invert
+# and uninvert the display) so the <flash> sequence given here is a
+# cheesy page-flip instead.
#
-# The Compose Character key can be used as a meta key if changed
-# by set-up.
+# The back_tab (<cbt>) sequence (\EI) doesn't work according to
+# tack(1), so it is not included in the descriptions below.
#
-wy185|wyse185|wyse 185,
- am, hs, km, mc5i, mir, msgr, xenl, xon,
- cols#80, it#8, lines#24, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
- dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
- dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
- el=\E[K, el1=\E[1K, enacs=\E)0,
- flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
- home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
- ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
- ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
- is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
- is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
- kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
- kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
- kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
- knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
- lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
- ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
- rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
- rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
- rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
- sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
- smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
- use=vt220+keypad,
-#
-# Wyse 185 with 24 data lines and top status (terminal status)
-wy185-24|wyse185-24|wyse 185 with 24 data lines,
- hs@,
- dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
- use=wy185,
-#
-# Wyse 185 with visual bell.
-wy185-vb|wyse185-vb|wyse 185+flash,
- bel@, use=wy185,
+# It's not clear whether auto_left_margin (<bw>) flag should be set
+# for these terminals; tack says yes, so it is set here, but this
+# differs from other descriptions I've seen.
#
-# Wyse 185 in 132-column mode.
-wy185-w|wyse185-w|wyse 185 in 132-column mode,
- cols#132, wsl#132,
- dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
- ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
+# Extension print mode (<mc5>) echoes all characters to the printer
+# port [in addition to displaying them] except for the page print mode
+# sequence (<mc4>); this is a slight violation of the terminfo
+# definition for <mc5> but I don't expect it to cause problems. We
+# reset to page print mode in <rs1> since it may have been enabled
+# accidentally.
#
-# Wyse 185 in 132-column mode with visual bell.
-wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
- bel@, use=wy185-w,
+# The descriptions with plus signs (+) are building blocks.
-# wy325 terminfo entries
-# Done by Joe H. Davis 3-9-92
+tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes),
+ OTbs, OTpt, am, bw,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\032$<50>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>,
+ dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>,
+ home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>,
+ if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>,
+ ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=\n,
+ kcuf1=^L, kcuu1=^K, kdch1=^?, kent=\r, khome=^^, mc4=\EA,
+ mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r,
+ u7=\E?, u8=%c%c\r, u9=\E?,
-# lines 25 columns 80
-#
-wy325|wyse325|Wyse epc,
- am, bw, hs, mc5i, mir,
- cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
- acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
- bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
- cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
- dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
- flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
- il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
- is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
- is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
- kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
- kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
- kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
- kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
- kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
- kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
- mc0=\EP, mc4=^T, mc5=\Ed#,
- pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
- pfx=\EZ1%p1%{63}%+%c%p2%s\177,
- pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
- rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
- rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
- rs3=\EwG\Ee($<100>,
- sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
- sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
- smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
- tsl=\EF, use=adm+sgr,
+# This isn't included in the basic capabilities because it is
+# typically unusable in combination with the full range of video
+# attributes, since the magic cookie attributes turn into ASCII
+# control characters, and the half-intensity ("protected") attribute
+# converts all affected characters to spaces.
-#
-# lines 24 columns 80 vb
-#
-wy325-vb|wyse325-vb|wyse-325 with visual bell,
- bel@, use=wy325,
+tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support,
+ mc0=\EP,
-#
-# lines 24 columns 132
-#
-wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
- cols#132, lw#7, nlab#16, wsl#97,
- cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
- rs2=\E`;$<70>, use=wy325,
-#
-# lines 25 columns 80
-#
-wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
- lh@, lines#25, lw@, nlab@,
- pln@, rs3=\EwG\Ee)$<100>, use=wy325,
-#
-# lines 25 columns 132
-#
-wy325-25w|wyse325-25w|wy325 132 columns,
- lh@, lines#25, lw@, nlab@,
- pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
-#
-# lines 25 columns 132 vb
-#
-wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
- bel@, use=wy325-w,
+# This uses half-intensity mode (<dim>) for standout (<smso>), and
+# exposes no other attributes (half-intensity is the only attribute
+# that does not generate a magic cookie.)
-#
-# lines 42 columns 80
-#
-wy325-42|wyse325-42|wyse-325 42 lines,
- lh@, lines#42, lw@, nlab@,
- pln@, rs3=\EwG\Ee)$<100>, use=wy325,
-#
-# lines 42 columns 132
-#
-wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
- lh@, lines#42, lw@, nlab@,
- pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
-#
-# lines 42 columns 132 vb
-#
-wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
- bel@, use=wy325-w,
-#
-# lines 43 columns 80
-#
-wy325-43|wyse325-43|wyse-325 43 lines,
- lh@, lines#43, lw@, nlab@,
- pln@, use=wy325,
-#
-# lines 43 columns 132
-#
-wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
- lh@, lines#43, lw@, nlab@,
- pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
-#
-# lines 43 columns 132 vb
-#
-wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
- bel@, use=wy325-w,
+tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support,
+ msgr,
+ dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(,
+ smso=\E),
-# Wyse 370 -- 24 line screen with status line.
-#
-# The terminal may have to be set for 8 data bits and 2 stop
-# bits for the arrow keys to work.
-#
-# If you change keyboards the terminal will send different
-# escape sequences.
-# The following definition is for the basic terminal without
-# function keys.
-#
-# <u0> -> enter Tektronix 4010/4014 mode
-# <u1> -> exit Tektronix 4010/4014 mode
-# <u2> -> enter ASCII mode (from any ANSI mode)
-# <u3> -> exit ASCII mode (goto native ANSI mode)
-# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
-# <u5> -> exit Tek 4207 mode (goto native ANSI mode)
-#
-# Bug: The <op> capability resets attributes.
-wy370-nk|wyse 370 without function keys,
- am, ccc, hs, mc5i, mir, msgr, xenl, xon,
- colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
- dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
- dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
- el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
- flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
- home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
- ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
- ind=\n$<2>,
- initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
- invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
- is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
- is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
- mc5=\E[5i,
- oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
- op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
- rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
- rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
- rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
- rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
- sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
- smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
- u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
- u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
-#
-# Function key set for the ASCII (wy-50 compatible) keyboard
-# This is the default 370.
-#
-wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
- kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
- kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
- kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
- knp=\E[U, kpp=\E[V, use=wy370-nk,
-#
-# Function key set for the VT-320 (and wy85) compatible keyboard
-#
-wy370-105k|Wyse 370 with 105 key keyboard,
- kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
- kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
- kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
- kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
- khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
- kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
- use=wy370-nk, use=vt220+keypad,
-#
-# Function key set for the PC compatible keyboard
-#
-wy370-EPC|Wyse 370 with 102 key keyboard,
- kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
- kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
- kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
-#
-# Wyse 370 with visual bell.
-wy370-vb|Wyse 370 with visible bell,
- bel@, use=wy370,
-#
-# Wyse 370 in 132-column mode.
-wy370-w|Wyse 370 in 132-column mode,
- cols#132, wsl#132,
- rs2=\E[35h\E[?3h$<70>, use=wy370,
-#
-# Wyse 370 in 132-column mode with visual bell.
-wy370-wvb|Wyse 370 with visible bell 132-columns,
- flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
-wy370-rv|Wyse 370 reverse video,
- rs3=\E[32h\E[?5h, use=wy370,
-#
-# Wyse 99gt Tektronix 4010/4014 emulator,
-#
-wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
- am, os,
- cols#74, lines#35,
- bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
- cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
- cuu1=^K, ff=^L,
- hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
- home=^]7`x @\037,
- hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
- is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
+# Full magic-cookie attribute support, with half-intensity reverse
+# video for standout. Note that we add a space in the <dim> sequence
+# to give a consistent magic-cookie count. Also note that <sgr> uses
+# backspacing (in the TVI-supported order) to apply all requested
+# attributes with only a single magic cookie.
+
+tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support,
+ xmc#1,
+ blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek,
+ rmul=\Em,
+ sgr=\E%?%p1%p5%|%t)%e(%;\s\010\E%?%p1%p3%|%tj%ek%;\010\E%?
+ %p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;,
+ sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El,
+
+# This uses the second page memory option to save & restore screen
+# contents. If your terminal is missing the option, this description
+# should still work, but that has not been tested.
+
+tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support,
+ flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s,
+ smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>,
+
+# This simulates flashing by briefly toggling to the other page
+# (kludge!)
+
+tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support,
+ bel=\EK$<100>\EK, use=tvi912b+2p,
+
+# Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>)
+
+tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support,
+ kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r,
+ kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r,
+ kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r,
+
+# Combinations of the basic building blocks
+
+tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes),
+ use=tvi912b+2p, use=tvi912b-unk,
+
+tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes),
+ use=tvi912b+vb, use=tvi912b-unk,
+
+tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print),
+ use=tvi912b+printer, use=tvi912b-unk,
+
+tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print),
+ use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk,
+
+tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print),
+ use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk,
+
+tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute),
+ use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk,
+
+tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies),
+ use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk,
+
+tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute),
+ use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk,
+
+tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies),
+ use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk,
+
+tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute),
+ use=tvi912b+dim, use=tvi912b-unk,
+
+tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies),
+ use=tvi912b+mc, use=tvi912b-unk,
+
+tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes),
+ use=tvi920b+fn, use=tvi912b-unk,
+
+tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes),
+ use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk,
+
+tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes),
+ use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk,
+
+tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print),
+ use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk,
+
+tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print),
+ use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer,
+ use=tvi912b-unk,
+
+tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print),
+ use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer,
+ use=tvi912b-unk,
+
+tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute),
+ use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim,
+ use=tvi912b-unk,
+
+tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies),
+ use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc,
+ use=tvi912b-unk,
+
+tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute),
+ use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim,
+ use=tvi912b-unk,
+
+tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies),
+ use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc,
+ use=tvi912b-unk,
+
+tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute),
+ use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk,
+
+tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies),
+ use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk,
+
+# Televideo 921 and variants
+# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
+# (tvi921: removed :ko=bt: before translation, I see no backtab cap;
+# also added empty <acsc> to suppress tic warning -- esr)
+tvi921|televideo model 921 with sysline same as page & real vi function,
+ OTbs, OTpt, am, hs, xenl, xhp,
+ cols#80, lines#24, xmc#0,
+ acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
+ cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
+ el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
+ if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n, invis@,
+ is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
+ kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
+ ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=\r\n, rmacs=\E%%,
+ rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
+# without the beeper
+# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
+# also added empty <acsc> to suppress tic warning -- esr)
+tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
+ am, hs, xenl, xhp,
+ cols#80, lines#24, xmc#0,
+ acsc=, clear=^Z, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
+ cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
+ el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
+ ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
+ invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
+ kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
+ kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
+ nel=\r\n, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
+# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
+tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
+ dl1=\ER$<2*/>, il1=\EE$<2*/>,
+ is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
+ kil1=\EE$<2*/>, use=tvi92B,
+
+# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
+# in from a BSD termcap file because it looks like they do something the
+# old ones skip -- esr)
+tvi924|televideo tvi924,
+ am, bw, hs, in, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80, xmc#0,
+ bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
+ cnorm=\E.3, cr=\r, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
+ cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
+ dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
+ flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
+ ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=\n,
+ invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
+ kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
+ kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
+ kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
+ kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
+ kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
+ kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
+ lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
+ pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
+ use=adm+sgr,
+
+# TVI925 DIP switches. In each of these, D = Down and U = Up,
#
-# Wyse 160 Tektronix 4010/4014 emulator,
+# Here are the settings for the external (baud) switches (S1):
#
-wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
- cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
- home=^]8`g @\037, use=wy99gt-tek,
+# Position Baud
+# 7 8 9 10 [Printer]
+# 1 2 3 4 [Main RS232]
+# -----------------------------------------------------
+# D D D D 9600
+# D D D U 50
+# D D U D 75
+# D D U U 110
+# D U D D 135
+# D U D U 150
+# D U U D 300
+# D U U U 600
+# U D D D 1200
+# U D D U 1800
+# U D U D 2400
+# U D U U 3600
+# U U D D 4800
+# U U D U 7200
+# U U U D 9600
+# U U U U 19200
#
-# Wyse 370 Tektronix 4010/4014 emulator,
#
-wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
- am, os,
- cols#80, lines#36,
- bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
- cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
- cuu1=^K, ff=^L,
- hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
- home=^]8g @\037,
- hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
- is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
- nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
-
-# Vendor-supplied Wyse entries end here.
-
+# Settings for word length and stop-bits (S1)
#
-#TITLE: TERMINFO ENTRY WY520
-#DATE: 8/5/93
-# The WY520 terminfo is based on the WY285 entry published on the WYSE
-# BBS with the addition of more function keys and special keys.
+# Position Description
+# 5 6
+# ---------------------------
+# U - 7-bit word
+# D - 8-bit word
+# - U 2 stop bits
+# - D 1 stop bit
#
-# rs1 -> set personality
-# rs2 -> set number of columns
-# rs3 -> set number of lines
-# is1 -> select the proper font
-# is2 -> do the initialization
-# is3 -> If this string is empty then rs3 gets sent.
#
-# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
-# - The BS key is programmed to generate BS in smcup since
-# is2 doesn't seem to work.
-# - Remove and shift/Remove: delete a character
-# - Insert : enter insert mode
-# - Find : delete to end of file
-# - Select : clear a line
-# - F11, F12, F13: send default sequences (not ESC, BS, LF)
-# - F14 : Home key
-# - Bottom status line (host writable line) is used.
-# - smkx,rmkx are removed because this would put the numeric
-# keypad in Dec application mode which doesn't seem to work
-# with SCO applications.
+# S2 (external) settings
#
-wy520|wyse520|wyse 520,
- am, hs, km, mc5i, mir, xenl, xon,
- cols#80, it#8, lines#24, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
- dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
- ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
- enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
- hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
- il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
- is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
- is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
- kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
- kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
- kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
- kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
- kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
- lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
- rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
- rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
- rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
- rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
- sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
- smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
- vpa=\E[%i%p1%dd, use=vt220+keypad,
+# Position Up Dn Description
+# --------------------------------------------
+# 1 X Local edit
+# X Duplex edit (transmit editing keys)
+# --------------------------------------------
+# 2 X 912/920 emulation
+# X 925
+# --------------------------------------------
+# 3 X
+# 4 X No parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Odd parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Even parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Mark parity
+# 5 X
+# --------------------------------------------
+# 3 X
+# 4 X Space parity
+# 5 X
+# --------------------------------------------
+# 6 X White on black display
+# X Black on white display
+# --------------------------------------------
+# 7 X Half Duplex
+# 8 X
+# --------------------------------------------
+# 7 X Full Duplex
+# 8 X
+# --------------------------------------------
+# 7 X Block mode
+# 8 X
+# --------------------------------------------
+# 9 X 50 Hz
+# X 60 Hz
+# --------------------------------------------
+# 10 X CR/LF (Auto LF)
+# X CR only
#
-# Wyse 520 with 24 data lines and status (terminal status)
-wy520-24|wyse520-24|wyse 520 with 24 data lines,
- hs@,
- dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
- use=wy520,
+# S3 (internal switch) settings:
#
-# Wyse 520 with visual bell.
-wy520-vb|wyse520-vb|wyse 520 with visible bell,
- flash=\E[30h\E\,\E[30l$<100>, use=wy520,
+# Position Up Dn Description
+# --------------------------------------------
+# 1 X Keyclick off
+# X Keyclick on
+# --------------------------------------------
+# 2 X English
+# 3 X
+# --------------------------------------------
+# 2 X German
+# 3 X
+# --------------------------------------------
+# 2 X French
+# 3 X
+# --------------------------------------------
+# 2 X Spanish
+# 3 X
+# --------------------------------------------
+# 4 X Blinking block cursor
+# 5 X
+# --------------------------------------------
+# 4 X Blinking underline cursor
+# 5 X
+# --------------------------------------------
+# 4 X Steady block cursor
+# 5 X
+# --------------------------------------------
+# 4 X Steady underline cursor
+# 5 X
+# --------------------------------------------
+# 6 X Screen blanking timer (ON)
+# X Screen blanking timer (OFF)
+# --------------------------------------------
+# 7 X Page attributes
+# X Line attributes
+# --------------------------------------------
+# 8 X DCD disconnected
+# X DCD connected
+# --------------------------------------------
+# 9 X DSR disconnected
+# X DSR connected
+# --------------------------------------------
+# 10 X DTR Disconnected
+# X DTR connected
+# --------------------------------------------
#
-# Wyse 520 in 132-column mode.
-wy520-w|wyse520-w|wyse 520 in 132-column mode,
- cols#132, wsl#132,
- dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
- ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
+# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
+tvi925|televideo 925,
+ OTbs, am, bw, hs, ul,
+ cols#80, lines#24, xmc#1,
+ bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=\r, cub1=^H, cud1=^V,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
+ flash=\Eb$<200>\Ed, fsl=\r\Eg, home=^^, ht=^I, hts=\E1,
+ ich1=\EQ, il1=\EE, ind=\n, invis@, is2=\El\E", kbs=^H, kclr=^Z,
+ kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
+ ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
+ kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
+ kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
+ tsl=\Eh\Ef, use=adm+sgr,
+# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
+# to avoid "magic cookie" standout glitch:
+tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
+ xmc@,
+ kbs=^H, kcub1=^H, kcud1=\n, rmso=\E(, smso=\E), use=tvi925,
+
+# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
+# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
+# for additional capabilities,
+# The following tvi descriptions from B:pjphar and virus!mike
+# is for all 950s. It sets the following attributes:
+# full duplex (\EDF) write protect off (\E()
+# conversation mode (\EC) graphics mode off (\E%)
+# white on black (\Ed) auto page flip off (\Ew)
+# turn off status line (\Eg) clear status line (\Ef\r)
+# normal video (\E0) monitor mode off (\EX or \Eu)
+# edit mode (\Er) load blank char to space (\Ee\040)
+# line edit mode (\EO) enable buffer control (^O)
+# protect mode off (\E\047) duplex edit keys (\El)
+# program unshifted send key to send line all (\E016)
+# program shifted send key to send line unprotected (\E004)
+# set the following to nulls:
+# field delimiter (\Ex0\200\200)
+# line delimiter (\Ex1\200\200)
+# start-protected field delimiter (\Ex2\200\200)
+# end-protected field delimiter (\Ex3\200\200)
+# set end of text delimiter to carriage return/null (\Ex4\r\200)
#
-# Wyse 520 in 132-column mode with visual bell.
-wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
- flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
+# TVI 950 Switch Setting Reference Charts
#
+# TABLE 1:
#
-# Wyse 520 emulating a vt420 7 bit mode.
-# The DEL key is programmed to generate BS in is2.
-# With EPC keyboard.
-# - 'End' key will clear till end of line on EPC keyboard
-# - Shift/End : ignored.
-# - Insert : enter insert mode.
-# - Delete : delete a character (have to change interrupt character
-# to CTRL-C: stty intr '^c') for it to work since the
-# Delete key sends 7FH.
-wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
- kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
- kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
- use=wy520,
+# S1 1 2 3 4 5 6 7 8 9 10
+# +-----------------------+-----+-----+-----------------------+
+# | Computer Baud Rate |Data |Stop | Printer Baud Rate |
+# | |Bits |Bits | |
+# +------+-----------------------+-----+-----+-----------------------+
+# | Up | See | 7 | 2 | See |
+# +------+-----------------------+-----+-----+-----------------------+
+# | Down | TABLE 2 | 8 | 1 | TABLE 2 |
+# +------+-----------------------+-----+-----+-----------------------+
#
-# Wyse 520 with 24 data lines and status (terminal status)
-# with EPC keyboard.
-wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
- hs@,
- dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
- use=wy520-epc,
#
-# Wyse 520 with visual bell.
-wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
- flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
+# S2 1 2 3 4 5 6 7 8 9 10
+# +-----+-----+-----------------+-----+-----------+-----+-----+
+# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
+# +------+-----+-----+-----------------+-----+-----------+-----+-----+
+# | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
+# +------+-----+-----+-----------------+-----+-----------+-----+-----+
+# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
+# +------+-----+-----+-----------------+-----+-----------+-----+-----+
#
-# Wyse 520 in 132-column mode.
-wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
- cols#132, wsl#132,
- dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
- ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
+# TABLE 2:
#
-# Wyse 520 in 132-column mode with visual bell.
-wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
- flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
+# +-----------+-----+-----+-----+-----+-----------+
+# | Display | 1 | 2 | 3 | 4 | Baud |
+# +-----------+-----+-----+-----+-----+ |
+# | Printer | 7 | 8 | 9 | 10 | Rate |
+# +-----------+-----+-----+-----+-----+-----------+
+# | D | D | D | D | 9600 |
+# | U | D | D | D | 50 |
+# | D | U | D | D | 75 |
+# | U | U | D | D | 110 |
+# | D | D | U | D | 135 |
+# | U | D | U | D | 150 |
+# | D | U | U | D | 300 |
+# | U | U | U | D | 600 |
+# | D | D | D | U | 1200 |
+# | U | D | D | U | 1800 |
+# | D | U | D | U | 2400 |
+# | U | U | D | U | 3600 |
+# | D | D | U | U | 4800 |
+# | U | D | U | U | 7200 |
+# | D | U | U | U | 9600 |
+# | U | U | U | U | 19200 |
+# +-----+-----+-----+-----+-----------+
#
-# Wyse 520 in 80-column, 36 lines
-wy520-36|wyse520-36|wyse 520 with 36 data lines,
- hs@,
- lines#36,
- dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
- use=wy520,
+# TABLE 3:
+# +-----+-----+-----+-----------+
+# | 3 | 4 | 5 | Parity |
+# +-----+-----+-----+-----------+
+# | X | X | D | None |
+# | D | D | U | Odd |
+# | D | U | U | Even |
+# | U | D | U | Mark |
+# | U | U | U | Space |
+# +-----+-----+-----+-----------+
+# X = don't care
#
-# Wyse 520 in 80-column, 48 lines
-wy520-48|wyse520-48|wyse 520 with 48 data lines,
- hs@,
- lines#48,
- dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
- use=wy520,
+# CHART:
+# +-----+-----+-----------------+
+# | 7 | 8 | Communication |
+# +-----+-----+-----------------+
+# | D | D | Half Duplex |
+# | D | U | Full Duplex |
+# | U | D | Block |
+# | U | U | Local |
+# +-----+-----+-----------------+
#
-# Wyse 520 in 132-column, 36 lines
-wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
- cols#132, wsl#132,
- rs2=\E[?3h,
- rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
- use=wy520-36,
+# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
+# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
+# should be present and all tvi native modes use the same string for this.
+# Finally, note that BSD has cud1=^V. -- esr)
#
-# Wyse 520 in 132-column, 48 lines
-wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
- cols#132, wsl#132,
- rs2=\E[?3h,
- rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
- use=wy520-48,
+# TVI 950 has 11 function-keys -TD
+tvi950|televideo 950,
+ OTbs, am, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, xmc#1,
+ acsc=jHkGlFmEnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, clear=\E*,
+ cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
+ fsl=\r, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=\n,
+ invis@,
+ is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
+ \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
+ \Ef\r,
+ kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
+ kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf1=^A@\r,
+ kf10=^AI\r, kf11=^AJ\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
+ kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
+ khome=^^, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej,
+ rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, tbc=\E3,
+ tsl=\Eg\Ef, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r, kF2=^Aa\r,
+ kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r, kF7=^Af\r,
+ kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
#
+# is for 950 with two pages adds the following:
+# set 48 line page (\E\\2)
+# place cursor at page 0, line 24, column 1 (\E-07 )
+# set local (no send) edit keys (\Ek)
#
-# Wyse 520 in 80-column, 36 lines with EPC keyboard
-wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
- hs@,
- lines#36,
- dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
- use=wy520-epc,
+# two page 950 adds the following:
+# when entering ex, set 24 line page (\E\\1)
+# when exiting ex, reset 48 line page (\E\\2)
+# place cursor at 0,24,1 (\E-07 )
+# set duplex (send) edit keys (\El) when entering vi
+# set local (no send) edit keys (\Ek) when exiting vi
#
-# Wyse 520 in 80-column, 48 lines with EPC keyboard
-wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
- hs@,
- lines#48,
- dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
- use=wy520-epc,
+tvi950-2p|televideo950 w/2 pages,
+ is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
+ \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
+ \E\\2\E-07\s\011,
+ rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+ smkx=\El, use=tvi950,
#
-# Wyse 520 in 132-column, 36 lines with EPC keyboard
-wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
- cols#132, wsl#132,
- rs2=\E[?3h,
- rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
- use=wy520-36pc,
+# is for 950 with four pages adds the following:
+# set 96 line page (\E\\3)
+# place cursor at page 0, line 24, column 1 (\E-07 )
#
-# Wyse 520 in 132-column, 48 lines with EPC keyboard
-wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
- cols#132, wsl#132,
- rs2=\E[?3h,
- rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
- use=wy520-48pc,
-
-# From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
-# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
-# file and we don't know what <hts> is -- esr)
-wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
- OTbs, am,
- cols#80, it#8, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
- dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
- is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
- kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
- rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
- smul=^N,
+# four page 950 adds the following:
+# when entering ex, set 24 line page (\E\\1)
+# when exiting ex, reset 96 line page (\E\\3)
+# place cursor at 0,24,1 (\E-07 )
+#
+tvi950-4p|televideo950 w/4 pages,
+ is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
+ \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
+ \E\\3\E-07\s\011,
+ rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+ smkx=\El, use=tvi950,
+#
+# <is2> for reverse video 950 changes the following:
+# set reverse video (\Ed)
+#
+# set vb accordingly (\Ed ...delay... \Eb)
+#
+tvi950-rv|televideo950 rev video,
+ flash=\Ed$<200/>\Eb,
+ is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\El
+ \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r
+ \0,
+ use=tvi950,
-wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
- is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
- kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
- use=wy75,
+# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
+tvi950-rv-2p|televideo950 rev video w/2 pages,
+ flash=\Ed$<200/>\Eb,
+ is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
+ \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
+ \E\\2\E-07\s,
+ rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+ smkx=\El, use=tvi950,
-# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
-wy100q|Wyse 100 for Quotron,
- OTbs,
- cols#80, lines#24, xmc#1,
- cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
- is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
- kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
+# tvi950-rv uses the appropriate entries from 950-4p and 950-rv
+tvi950-rv-4p|televideo950 rev video w/4 pages,
+ flash=\Ed$<200/>\Eb,
+ is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee\s\017\011\Ek
+ \E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0
+ \E\\3\E-07\s,
+ rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
+ smkx=\El, use=tvi950,
+# From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
+# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
+# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
+# the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
+# the :ko: string had :cl: in it, which means that one of the original
+# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
+# the 950 has. Finally, corrected the <kel> string to match the 950 and what
+# ko implies -- esr)
+# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
+# also work.
+tvi955|televideo 955,
+ OTbs, mc5i, msgr@,
+ it#8, xmc@,
+ acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
+ civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
+ cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
+ is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
+ knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%,
+ rmam=\E[=7l, rmxon=^N,
+ rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee\s\017\E0P\E6\0\E0p\E4\0
+ \Ef\r,
+ sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
+ use=tvi950,
+tvi955-w|955-w|televideo955 w/132 cols,
+ cols#132,
+ is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
+# use half-intensity as normal mode, full intensity as <bold>
+tvi955-hb|955-hb|televideo955 half-bright,
+ bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
+ sgr0=\EG0\E[=5h, use=tvi955,
+# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
+# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
+# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
+# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
+# it does to the function keys. I deduced <rmam>/<smam>.
+# also added empty <acsc> to suppress tic warning, -- esr)
+tvi970|televideo 970,
+ OTbs, OTpt, am, da, db, mir, msgr,
+ cols#80, it#8, lines#24,
+ acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
+ cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
+ ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
+ is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
+ kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
+ rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
+ smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, vpa=\E[%i%p1%dd,
+tvi970-vb|televideo 970 with visual bell,
+ flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
+ use=tvi970,
+tvi970-2p|televideo 970 with using 2 pages of memory,
+ rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
+ use=tvi970,
+# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
+# per line (rather than 40), Esc K chooses the normal character set. Not sure
+# padding is needed, but adapted from the tvi920c termcap. The <smso> and
+# <smul> strings are klutzy, but at least use no screen space.
+# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
+# its absence means <smam>=\Ev isn't safe to use. -- esr)
+# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
+# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
+# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
+tvipt|televideo personal terminal,
+ OTbs, am,
+ cols#80, lines#24,
+ cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
+ ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
+ il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=\n,
+ kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
+ rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
+# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
+tvi9065|televideo 9065,
+ am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
+ wnum#0, wsl#30,
+ acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
+ blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
+ cnorm=\E.3, cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
+ cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
+ cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
+ dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
+ el=\ET, flash=\Eb$<15>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
+ ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
+ il=\E[%p1%dL, il1=\EE, ind=\n, invis=\EG1, ip=$<3>,
+ is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
+ is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
+ kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
+ kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
+ mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=\r\n,
+ pfkey=\E|%p1%{48}%+%c3%p2%s\031,
+ pfloc=\E|%p1%{48}%+%c2%p2%s\031,
+ pfx=\E|%p1%{48}%+%c1%p2%s\031,
+ pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
+ rep=\E[%p2%db%p1%c, rev=\EG4,
+ rf=/usr/share/tabset/stdcrt, ri=\Ej, rmacs=\E%%,
+ rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, rmdc=\0,
+ rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, rmxon=^N,
+ rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
+ rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=1
+ 3.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=
+ 21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee\s\Ex0\0\0\Ex1\0\0
+ \Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
+ rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0
+ \0\0,
+ sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;
+ %?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?
+ %p9%t\E$%e\E%%%;,
+ sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
+ smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
+ tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, use=ecma+index,
-#### Kermit terminal emulations
+#### Visual (vi)
#
-# Obsolete Kermit versions may be listed in the section describing obsolete
-# non-ANSI terminal emulators later in the file.
+# In September 1993, Visual Technology of Westboro, Massachusetts,
+# merged with White Pine Software of Nashua, New Hampshire.
+#
+# White Pine Software may be contacted at +1 603/886-9050.
+# Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
#
-# KERMIT standard all versions.
-# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
-# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
-# From: greg small <gts@populi.berkeley.edu> 9-25-84
-kermit|standard kermit,
- OTbs,
- cols#80, lines#24,
- clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
- el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
- kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
-kermit-am|standard kermit plus auto-margin,
- am,
- is2=K1 Standard Kermit plus Automatic Margins\n,
- use=kermit,
-# IBMPC Kermit 1.2.
-# Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
-# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
-# line).
-# From: greg small <gts@populi.berkeley.edu> 8-30-84
-pckermit|pckermit12|UCB IBMPC Kermit 1.2,
- am,
- lines#25,
- clear=\EH\EJ, ed@, el@,
- is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
-# IBMPC Kermit 1.20
-# Cannot use line 25, now acts funny like ansi special scrolling region.
-# Initialization must escape from that region by cursor position to line 24.
-# Cannot use character insert because 1.20 goes crazy if insert at col 80.
-# Does not use :am: because autowrap is lost when kermit dropped and restarted.
-# From: greg small <gts@populi.berkeley.edu> 12-19-84
-pckermit120|UCB IBMPC Kermit 1.20,
- it#8, lines#24,
- cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
- il1=\EL,
- is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
- rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
-# MS-DOS Kermit 2.27 for the IBMPC
-# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
-# Cannot use line 25, now acts funny like ansi special scrolling region.
-# Initialization must escape from that region by cursor position to line 24.
-# Does not use am: because autowrap is lost when kermit dropped and restarted.
-# Reverse video for standout like H19.
-# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
-# From: greg small <gts@populi.berkeley.edu> 3-17-85
-msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
- OTbs, am@,
+# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
+# Recently I hacked together the following termcap for Visual
+# Technology's Visual 50 terminal. It's a slight modification of
+# the vt52 termcap.
+# It's intended to run when the Visual 50 is in vt52 emulation mode
+# (I know what you're thinking; if it's emulating a vt52, then why
+# another termcap? Well, it turns out that the Visual 50 can handle
+# <dl1> and db(?) among other things, which the vt52 can't)
+# The termcap works OK for the most part. The only problem is on
+# character inserts. The whole line gets painfully redrawn for each
+# character typed. Any suggestions?
+# Beau's entry is combined with the vi50 entry from University of Wisconsin.
+# Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
+# disguise; <kf7>-<kf9> are really l1-l3.
+vi50|visual 50,
+ OTbs, OTpt, am, da, db, msgr,
cols#80, it#8, lines#24,
- clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
- cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
- home=\EH, ht=^I, il1=\EL,
- is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
- kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
- rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
-# MS-DOS Kermit 2.27 with automatic margins
-# From: greg small <gts@populi.berkeley.edu> 3-17-85
-msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
- am,
- cvvis=\EO\Eq\EG\EvK5,
- is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
- use=msk227,
-# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
-# Automatic margins now default. Use ansi <sgr> for highlights.
-# Define function keys.
-# (msk22714: removed obsolete ":kn#10:" -- esr)
-# From: greg small <gts@populi.berkeley.edu> 3-17-85
-msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
- am,
- bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
- is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
- kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
- kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
-# This was designed for a VT320 emulator, but it is probably a good start
-# at support for the VT320 itself.
-# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
-# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
-vt320-k3|MS-Kermit 3.00's vt320 emulation,
- am, eslok, hs, km, mir, msgr, xenl,
- cols#80, it#8, lines#49, pb#9600, vt#3,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
- flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
- fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
- is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
- kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
- kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
- rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
- rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
- rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
- sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
-# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
-# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
-# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
-vt320-k311|dec vt320 series as defined by kermit 3.11,
- am, eslok, hs, mir, msgr, xenl, xon,
- cols#80, it#8, lines#24, vt#3,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
- flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
- is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
- kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
- kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
- lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
- rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
- rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
- rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
- smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
+ OTnl=\n, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=\r, cub1=^H,
+ cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
+ ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
+ kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
+ nel=\r\n, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
+# this one was BSD & SCO's vi50
+vi50adm|visual 50 in adm3a mode,
+ am, msgr,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
+ ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=\n, kbs=^H,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
+ rmso=\ET, smso=\EU,
+# From: Jeff Siegal <jbs@quiotix.com>
+vi55|Visual 55,
+ OTbs, am, mir, msgr,
+ cols#80, it#8, lines#24,
+ clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
+ cud1=\n, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
+ il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
+ smir=\Ea, smso=\EU,
-######## NON-ANSI TERMINAL EMULATIONS
-#
+# Visual 200 from BRL
+# The following switch settings are assumed for normal operation:
+# FULL_DUPLEX SCROLL CR
+# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
+# Other switches may be set for operator convenience or communication
+# requirements.
+# Character insertion is kludged in order to get around the "beep" misfeature.
+# (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
+# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
+# and <dl1> strings, but we seem to get along fine without them.
+vi200|visual 200,
+ OTbs, OTpt, am, mir, msgr,
+ OTkn#10, cols#80, it#8, lines#24,
+ acsc=+h.kffggjmkllsmenbq`tnuovcwdxa}r, bel=^G, cbt=\Ez,
+ clear=\Ev, cnorm=\Ec, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ed,
+ dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, el=\Ex, home=\EH, ht=^I,
+ hts=\E1, il1=\EL, ind=\n, invis=\Ea, kbs=^H, kclr=\Ev,
+ kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, kf1=\E?q,
+ kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
+ kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, kil1=\EL,
+ krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, rmacs=\EG,
+ rmkx=\E>, rmso=\E3, rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX,
+ sgr0=\E3\Eb, smacs=\EF, smkx=\E=, smso=\E4, tbc=\Eg,
+# The older Visuals didn't come with function keys. This entry uses
+# <smkx> and <rmkx> so that the keypad keys can be used as function keys.
+# If your version of vi doesn't support function keys you may want
+# to use vi200-f.
+vi200-f|visual 200 no function keys,
+ is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
+ kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
+ kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
+ use=vi200,
+vi200-rv|visual 200 reverse video,
+ cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
-#### Avatar
+# the function keys are programmable but we don't reprogram them to their
+# default values with <is2> because programming them is very verbose. maybe
+# an initialization file should be made for the 300 and they could be stuck
+# in it.
+# (vi300: added <rmam>/<smam> based on init string -- esr)
+vi300|visual 300 ansi x3.64,
+ am, bw, mir, xenl,
+ cols#80, lines#24,
+ bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ il1=\E[L, ind=\n,
+ is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
+ kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
+ kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
+ rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
+ smso=\E[1m, smul=\E[4m,
+# some of the vi300s have older firmware that has the command
+# sequence for setting editing extent reversed.
+vi300-old|visual 300 with old firmware (set edit extent reversed),
+ is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, use=vi300,
+
+# Visual 500 prototype entry from University of Wisconsin.
+# The best place to look for the escape sequences is page A1-1 of the
+# Visual 500 manual. The initialization sequence given here may be
+# overkill, but it does leave out some of the initializations which can
+# be done with the menus in set-up mode.
+# The :xp: line below is so that emacs can understand the padding requirements
+# of this slow terminal. :xp: is 10 time the padding factor.
+# (vi500: removed unknown :xp#4: termcap;
+# also added empty <acsc> to suppress tic warning -- esr)
+vi500|visual 500,
+ am, mir, msgr,
+ cols#80, it#8, lines#33,
+ acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=\r,
+ csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
+ cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+ dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
+ el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
+ ind=\n,
+ is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
+ kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ khome=\EH, nel=\r\n, rmacs=^O, rmir=\Ej, rmso=\E^G,
+ rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
+
+# The visual 550 is a visual 300 with tektronix graphics,
+# and with 33 lines. clear screen is modified here to
+# also clear the graphics.
+vi550|visual 550 ansi x3.64,
+ lines#33,
+ clear=\030\E[H\E[2J, use=vi300,
+
+vi603|visual603|visual 603,
+ hs, mir,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
+ csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
+ ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
+ rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+ sgr0=\E[m\017$<2>, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ tsl=\EP2~, use=vt100+4bsd,
+
+#### Wyse (wy)
#
-# These entries attempt to describe Avatar, a terminal emulation used with
-# MS-DOS bulletin-board systems. It was designed to give ANSI-like
-# capabilities, but with cheaper (shorter) control sequences. Messy design,
-# excessively dependent on PC idiosyncracies, but apparently rather popular
-# in the BBS world.
+# Wyse Technology
+# 3471 North First Street
+# San Jose, CA 95134
+# Vox: (408)-473-1200
+# Fax: (408) 473-1222
+# Web: http://www.wyse.com
#
-# No color support. Avatar doesn't fit either of the Tektronix or HP color
-# models that terminfo knows about. An Avatar color attribute is the
-# low 7 bits of the IBM-PC display-memory attribute. Bletch.
+# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
+# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
+# obvious address, <http://www.wyse.com>. They keep terminfo entries at
+# https://web.archive.org/web/19970712022641/http://www.wyse.co.uk/support/appnotes/idxappnt.htm
#
-# I wrote these entries while looking at the Avatar spec. I don't have
-# the facilities to test them. Let me know if they work, or don't.
#
-# Avatar escapes not used by these entries (because maybe you're smarter
-# and more motivated than I am and can figure out how to wrap terminfo
-# around some of them, and because they are weird enough to be funny):
-# level 0:
-# ^L -- clear window/reset current attribute to default
-# ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
+# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
+# They now own the Qume and Amdek brands, too. So these are the people to
+# talk with about all Link, Qume, and Amdek terminals.
#
-# bit: 6 5 4 3 2 1 0
-# | | | | |
-# +---+---+ | +---+---+
-# | | |
-# | | foreground color
-# | foreground intensity
-# background color
-# level 0+:
-# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
-# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
-# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
-# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
-# (^V^L and ^V^M set the current attribute as a side-effect.)
-# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
-# in the pattern, <c> the number of times the pattern
-# should be repeated. If either value is 0, no-op.
-# The pattern can contain Avatar console codes,
-# including other ^V ^Y patterns.
-# level 1:
-# ^V^O -- clockwise mode on; turn print direction right each time you
-# hit a window edge (yes, really). Turned off by CR
-# ^V^P -- no-op
-# ^V^Q%c -- query the driver
-# ^V^R -- driver reset
-# ^V^S -- Sound tone (PC-specific)
-# ^V^T -- change highlight at current cursor poition to %c
-# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
-# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
-# -- define window
+# These entries include a few small fixes.
+# I canceled the bel capacities in the vb entries.
+# I made two trivial syntax fixes in the wyse30 entry.
+# I made some entries relative to adm+sgr.
#
-# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
-# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
-# tell ncurses that the corresponding highlights exist; it should use <sgr>,
-# which is the only method that will actually work for multiple highlights.)
#
-# Update by TD - 2004: half of this was inconsistent. Found documentation
-# and repaired most of the damage. sgr0 is probably incorrect, but the
-# available documentation gives no clues for a workable string.
-avatar0|avatar terminal emulator level 0,
- am, bce, msgr,
- cols#80, it#8, lines#25,
- blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
- cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
- ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
- rmacs@, rs2=^L,
- sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
- sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
- use=klone+acs,
-# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
-avatar0+|avatar terminal emulator level 0+,
- dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
-# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
-avatar|avatar1|avatar terminal emulator level 1,
- civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
- rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
+# Note: The wyse75, wyse85, and wyse99 have been discontinued.
-#### RBcomm
+# Although the Wyse 30 can support more than one attribute
+# it requires magic cookies to do so. Many applications do not
+# function well with magic cookies. The following terminfo uses
+# the protect mode to support one attribute (dim) without cookies.
+# If more than one attribute is needed then the wy30-mc terminfo
+# should be used.
#
-# RBComm is a lean and mean terminal emulator written by the Interrupt List
-# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
-# '90s), especially in the BBS world, and still has some loyal users due to
-# its very small memory footprint and to a cute macro language.
-rbcomm|IBM PC with RBcomm and EMACS keybindings,
- am, bw, mir, msgr, xenl,
- cols#80, it#8, lines#25,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub1=^H, cud1=^C, cuf1=^B,
- cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
- dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
- il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
- is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
- kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
- rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
- rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
- rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
- smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
-rbcomm-nam|IBM PC with RBcomm without autowrap,
- am@,
- bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
- is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
- kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
-rbcomm-w|IBM PC with RBcomm in 132 column mode,
- cols#132,
- bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
- is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
- kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
-
-######## LCD DISPLAYS
+wy30|wyse30|Wyse 30,
+ am, bw, hs, mc5i, mir, msgr, xon,
+ cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
+ acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
+ civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=\r, cub1=^H,
+ cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
+ dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
+ fsl=\r, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
+ ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
+ kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
+ kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
+ kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
+ kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
+ mc5=^X, nel=\r\n, pfx=\Ez%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
+ rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
+ sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
+ sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
+ smso=\E`7\E), tbc=\E0, tsl=\EF,
#
-
-#### Matrix Orbital
-# from: Eric Z. Ayers (eric@ale.org)
+# This terminal description uses the non-hidden attribute mode
+# (with magic cookie).
#
-# Matrix Orbital 20x4 LCD display
-# Command Character is 0xFE (decimal 254, octal 376)
+# (wy30-mc: added <smcup> to suppress tic warning --esr)
+wy30-mc|wyse30-mc|wyse 30 with magic cookies,
+ msgr@,
+ ma@, xmc#1,
+ blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
+ rmcup=\EG0, rmso=\EG0,
+ sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
+ %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
+ %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
+ sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
+ smso=\EG4, use=wy30, use=adm+sgr,
+# The mandatory pause used by <flash> does not work with
+# older versions of terminfo. If you see this effect then
+# unset xon and delete the / from the delay.
+# i.e. change $<100/> to $<100>
+wy30-vb|wyse30-vb|wyse 30 visible bell,
+ bel@, use=wy30,
#
-# On this device, cursor addressability isn't possible. The LCD expects:
-# 0xfe G <col> <row>
-# for cup: %p1 == row and %p2 is column
+# The Wyse 50 can support one attribute (e.g. Dim, Inverse,
+# Normal) without magic cookies by using the protect mode.
+# The following description uses this feature, but when more
+# than one attribute is put on the screen at once, all attributes
+# will be changed to be the same as the last attribute given.
+# The Wyse 50 can support more attributes when used with magic
+# cookies. The wy50-mc terminal description uses magic cookies
+# to correctly handle multiple attributes on a screen.
#
-# This line:
-# cup=\376G%p2%c%p1%c
-# LOOKS like it will work, but sometimes only one of the two numbers is sent.
-# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
+wy50|wyse50|Wyse 50,
+ am, bw, hs, mc5i, mir, msgr, xon,
+ cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
+ acsc=a;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, cbt=\EI,
+ civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r, cub1=^H,
+ cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
+ ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
+ home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
+ is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
+ kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW,
+ kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
+ kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
+ ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n,
+ pfx=\Ez%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
+ ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
+ sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH
+ \002%e\EH\003%;,
+ sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
+ smso=\E`6\E), tbc=\E0, tsl=\EF, kF1=^A`\r, kF10=^Ai\r,
+ kF11=^Aj\r, kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r,
+ kF16=^Ao\r, kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r,
+ kF6=^Ae\r, kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r,
#
-# Alas, there is no cursor upline capability on this display.
+# This terminal description uses the non-hidden attribute mode
+# (with magic cookie).
#
-# These entries add some 'sanity stuff' to the clear function. That is, it
-# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
-# and turns off the cursor blinking and stuff like that.
+# The mandatory pause used by flash does not work with some
+# older versions of terminfo. If you see this effect then
+# unset <xon> and delete the / from the delay.
+# i.e. change $<100/> to $<100>
+# (wy50-mc: added <smcup> to suppress tic warning --esr)
+wy50-mc|wyse50-mc|wyse 50 with magic cookies,
+ msgr@,
+ ma@, xmc#1,
+ blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
+ rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
+ sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?
+ %p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8
+ %t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
+ sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
+ smso=\EGt, use=wy50, use=adm+sgr,
+wy50-vb|wyse50-vb|wyse 50 visible bell,
+ bel@, use=wy50,
+wy50-w|wyse50-w|wyse 50 132-column,
+ cols#132, lw#7, nlab#16, wsl#97,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
+ use=wy50,
+wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
+ bel@, use=wy50-w,
+
#
-# NOTE: calling 'beep' turns on the backlight (bell)
-# NOTE: calling 'flash' turns it on and back off (visual bell)
+# The Wyse 350 is a Wyse 50 with color.
+# Unfortunately this means that it has magic cookies.
+# The color attributes are designed to overlap the reverse, dim and
+# underline attributes. This is nice for monochrome applications
+# because you can make underline stuff green (or any other color)
+# but for true color applications it's not so hot because you cannot
+# mix color with reverse, dim or underline.
+# To further complicate things one of the attributes must be
+# black (either the foreground or the background). In reverse video
+# the background changes color with black letters. In normal video
+# the foreground changes colors on a black background.
+# This terminfo uses some of the more advanced features of curses
+# to display both color and blink. In the final analysis I am not
+# sure that the wy350 runs better with this terminfo than it does
+# with the wy50 terminfo (with user adjusted colors).
#
-MtxOrb|Generic Matrix Orbital LCD display,
- bel=\376B^A, clear=\376X\376C\376R\376K\376T,
- cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
- flash=\376B\001$<200>\376F, home=\376H,
-MtxOrb204|20x4 Matrix Orbital LCD display,
- cols#20, lines#4, use=MtxOrb,
-MtxOrb162|16x2 Matrix Orbital LCD display,
- cols#16, lines#2, use=MtxOrb,
-# The end
-
-######## OLDER TERMINAL TYPES
+# The mandatory pause used by flash does not work with
+# older versions of terminfo. If you see this effect then
+# unset xon and delete the / from the delay.
+# i.e. change $<100/> to $<100>
#
-# This section is devoted to older commercial terminal brands that are now
-# discontinued, but known to be still in use or represented by emulations.
+# Bug: The <op> capability resets attributes.
+wy350|wyse350|Wyse 350,
+ am, bw, hs, mc5i, mir, xon,
+ colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
+ wsl#45, xmc#1,
+ acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
+ cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
+ cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
+ dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
+ flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
+ il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
+ is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
+ ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
+ kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
+ ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=\r\n, oc=\E%?, op=\EG0,
+ pfx=\Ez%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
+ rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
+ setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e
+ %p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e
+ %p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}
+ %+%c,
+ sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}
+ %?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t
+ %{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH
+ \002%e\EH\003%;,
+ sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
+ smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
+wy350-vb|wyse350-vb|wyse 350 visible bell,
+ bel@, use=wy350,
+wy350-w|wyse350-w|wyse 350 132-column,
+ cols#132, lw#7, nlab#16, wsl#97,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
+ use=wy350,
+wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
+ bel@, use=wy350-w,
#
-
-#### AT&T (att, tty)
+# This terminfo description is untested.
+# The wyse100 emulates an adm31, so the adm31 entry should work.
#
-# This section also includes Teletype-branded VDTs.
+wy100|wyse 100,
+ hs, mir,
+ cols#80, lines#24, xmc#1,
+ bel=^G, clear=\E;, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=\r, il1=\EE, ind=\n,
+ invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
+ kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
+ kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
+ rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
#
-# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
-# Boundless Technologies); for details, see the header comment on the ADDS
-# section.
+# The Wyse 120/150 has most of the features of the Wyse 60.
+# This terminal does not need padding up to 9600 baud!
+# <msgr> should be set but the clear screen fails when in
+# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
+# then set <msgr>.
#
-# These are AT&T's official terminfo entries. All-caps aliases have been
-# removed.
+wy120|wyse120|wy150|wyse150|Wyse 120/150,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
+ acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+ bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
+ cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
+ dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
+ flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=\011$<1>,
+ hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
+ is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
+ \024\El,
+ is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
+ kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
+ kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
+ kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
+ mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
+ pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
+ pfx=\EZ1%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
+ rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
+ rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
+ rs3=\EwG\Ee($<100>,
+ sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
+ %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
+ %{64}%|%;%?%p7%t%{1}%|%;%c,
+ sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
+ smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
+ tbc=\E0, tsl=\EF, use=adm+sgr,
#
-att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
- am, eo, mir, msgr, xon,
- cols#80, it#8, lines#24,
- bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
- kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
- kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
- kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
- kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
- kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
- rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
- smso=\E[7m,
-att2350|AT&T 2350 Video Information Terminal 80 column mode,
- mc0@, mc4@, mc5@, use=att2300,
-
-# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
-# Seems upward compatible with vt100, plus ins/del line/char.
-# On sgr, the protection parameter is ignored.
-# No check is made to make sure that only 3 parameters are output.
-# standout= reverse + half-intensity = 3 | 5.
-# bold= reverse + underline = 2 | 3.
-# note that half-bright blinking doesn't look different from normal blinking.
-# NOTE:you must program the function keys first, label second!
-# (att4410: a BSD entry has been seen with the following capabilities:
-# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
-# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
-att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
- am, hs, mir, msgr, xon,
- cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
- acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
- dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
- ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
- is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
- kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
- kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
- ll=\E[24H, nel=^M^J,
- pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
- pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
- rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
- sc=\E7,
- sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
- tsl=\E7\E[25;%p1%{1}%+%dH,
-
-att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
- cols#132, wsl#132,
- is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
-
-att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
- OTbs,
- pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
- use=att5410v1,
-
-att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
- cols#132, wsl#132,
- is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
-
-# 5410 in terms of a vt100
-# (v5410: added <rmam>/<smam> based on init string -- esr)
-v5410|att5410 in terms of a vt100,
- am, mir, msgr, xon,
- cols#80, it#8, lines#24, vt#3,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
- clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub1=^H, cud1=^J, cuf1=\E[C$<2>,
- cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
- dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
- enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
- il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
- kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
- rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
- rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
- sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
- sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
- smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
- use=vt100+fnkeys,
-
+wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
+ cols#132, lw#7, nlab#16, wsl#97,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
+ rs2=\E`;$<70>, use=wy120,
#
-# Teletype Model 5420 -- A souped up 5410, with multiple windows,
-# even! the 5420 has three modes: scroll, window or page mode
-# this terminfo should work in scroll or window mode, but doesn't
-# take advantage of any of the differences between them.
+wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy120,
#
-# Has memory below (2 lines!)
-# 3 pages of memory (plus some spare)
-# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
-# <hpa>, <hts> would work for these, but these work in both scroll and window
-# mode... Unset insert character so insert mode works
-# <is1> sets 80 column mode,
-# <is2> escape sequence:
-# 1) turn off all fonts
-# 2) function keys off, keyboard lock off, control display off,
-# insert mode off, erasure mode off,
-# 3) full duplex, monitor mode off, send graphics off, nl on lf off
-# 4) reset origin mode
-# 5) set line wraparound
-# 6) exit erasure mode, positional attribute mode, and erasure extent mode
-# 7) clear margins
-# 8) program ENTER to transmit ^J,
-# We use \212 to program the ^J because a bare ^J will get translated by
-# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
-# 1 2 3 4 5 6 7 8
-# <is3> set screen color to black,
-# No representation in terminfo for the delete word key: kdw1=\Ed
-# Key capabilities assume the power-up send sequence...
-# This <rmcup> is not strictly necessary, but it helps maximize
-# memory usefulness: <rmcup=\Ez>,
-# Alternate sgr0: <sgr0=\E[m\EW^O>,
-# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
-# smkx programs the SYS PF keys to send a set sequence.
-# It also sets up labels f1, f2, ..., f8, and sends edit keys.
-# This string causes them to send the strings <kf1>-<kf8>
-# when pressed in SYS PF mode.
-# (att4415: I added <rmam>/<smam> based on the init string -- esr)
-att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
- OTbs, db, mir, xon,
- lh#2, lm#78, lw#8, nlab#8, wsl#55,
- cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
- cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
- cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
- dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
- flash=\E[?5h$<200>\E[?5l, home=\E[x,
- hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
- il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
- is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
- is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
- kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
- kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
- kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
- kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
- lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
- mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
- rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
- rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
- sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
- smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
- tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
- use=att4410,
-
-att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
- cols#132, lm#54, wsl#97,
- is1=\E[?3h$<100>, use=att4415,
-
-att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
- flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
-
-att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
- cols#132, lm#54, wsl#97,
- flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
- use=att4415,
-
-# Note that this mode permits programming USER PF KEYS and labels
-# However, when you program user pf labels you have to reselect
-# user pf keys to make them appear!
-att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
- kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
- pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
- pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
-
-att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
- kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
- use=att4415,
-
-att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
- kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
- use=att4415-rv,
-
-att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
- kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
- use=att4415-w,
-
-att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
- kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
- use=att4415-w-rv,
-
-att5420_2|AT&T 5420 model 2 80 cols,
- am, db, hs, mir, msgr, xon,
- cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
- cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
- cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
- el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
- home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
- ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
- indn=\E[%p1%dE, invis=\E[8m,
- is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
- kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
- kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
- kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
- kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
- kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
- lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
- mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
- rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
- rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
- sc=\E7,
- sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
- smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
-att5420_2-w|AT&T 5420 model 2 in 132 column mode,
- cols#132,
- is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
- use=att5420_2,
-
-att4418|att5418|AT&T 5418 80 cols,
- am, xon,
- cols#80, lines#24,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
- cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
- cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
- ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
- is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
- kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
- kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
- kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
- kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
- kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
- rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
- sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
-att4418-w|att5418-w|AT&T 5418 132 cols,
- cols#132,
- is1=\E[?3h, use=att5418,
-
-att4420|tty4420|teletype 4420,
- OTbs, da, db, eo, msgr, ul, xon,
- cols#80, lines#24, lm#72,
- bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
- dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
- kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
- kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
- lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
- rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
-
-# The following is a terminfo entry for the Teletype 4424
-# asynchronous keyboard-display terminal. It supports
-# the vi editor. The terminal must be set up as follows,
+wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
#
-# HIGHLIGHT DEFINITION 3-TONE
-# DISPLAY FUNCTION GROUP III
+wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
+ bel@, use=wy120,
#
-# The second entry below provides limited (a la adm3a)
-# operation under GROUP II.
+wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
+ bel@, use=wy120-w,
#
-# This must be used with DISPLAY FUNCTION GROUP I or III
-# and HIGHLIGHT DEFINITION 3-TONE
-# The terminal has either bold or blink, depending on options
+# The Wyse 60 is like the Wyse 50 but with more padding.
+# The reset strings are slow and the pad times very depending
+# on other parameters such as font loading. I have tried
+# to follow the following outline:
#
-# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
-att4424|tty4424|teletype 4424,
- OTbs, am, xon,
- cols#80, lines#24,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
- dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
- ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
- kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
- khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
- rmul=\EZ,
- sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
- sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
- tbc=\EF,
-
-att4424-1|tty4424-1|teletype 4424 in display function group I,
- kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
- use=att4424,
-
-# This entry is not one of AT&T's official ones, it was translated from the
-# 4.4BSD termcap file. The highlight strings are different from att4424.
-# I have no idea why this is -- older firmware version, maybe?
-# The following two lines are the comment originally attached to the entry:
-# This entry appears to avoid the top line - I have no idea why.
-# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
-att4424m|tty4424m|teletype 4424M,
- am, da, db, mir,
- cols#80, it#8, lines#23,
- bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
- dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
- is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
- kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smso=\E[7m, smul=\E[4m,
-
-# The Teletype 5425 is really version 2 of the Teletype 5420. It
-# is quite similar, except for some minor differences. No page
-# mode, for example, so all of the <cup> sequences used above have
-# to change back to what's being used for the 5410. Many of the
-# option settings have changed their numbering as well.
+# <rs1> -> set personality
+# <rs2> -> set number of columns
+# <rs3> -> set number of lines
+# <is1> -> select the proper font
+# <is2> -> do the initialization
+# <is3> -> set up display memory (2 pages)
#
-# This has been tested on a preliminary model.
+# The Wyse 60's that have vt100 emulation are slower than the
+# older Wyse 60's. This change happened mid-1987.
+# The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
#
-# (att5425: added <rmam>/<smam> based on the init string -- esr)
-att5425|tty5425|att4425|AT&T 4425/5425,
- am, da, db, hs, mir, msgr, xenl, xon,
- cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
- clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
- el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
- flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
- hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
- invis=\E[8m, is1=\E<\E[?3l$<100>,
- is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
- is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
- kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
- kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
- kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
- kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
- nel=^M^J,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
- rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
- rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
- rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
- sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
- vpa=\E[%p1%{1}%+%dd,
-
-att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
- smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
-
-att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
- cols#132, lm#54, wsl#97,
- is1=\E[?3h$<100>, use=tty5425,
-
-# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
-# I also added <rmam>/<smam> -- esr)
-att4426|tty4426|teletype 4426S,
- am, da, db, xon,
- cols#80, lines#24, lm#48,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
- cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
- hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
- il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
- is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
- kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
- kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
- nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
- rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
- rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
- smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%p1%dd,
-
-# Terminfo entry for the AT&T 510 A Personal Terminal
-# Function keys 9 - 16 are available only after the
-# screen labeled (soft keys/action blocks) are labeled. Function key
-# 9 corresponds to the leftmost touch target on the screen,
-# function key 16 corresponds to the rightmost.
+# The meta key is only half right. This terminal will return the
+# high order bit set when you hit CTRL-function_key
#
-# This entry is based on one done by Ernie Rice at Summit, NJ and
-# changed by Anne Gallup, Skokie, IL, ttrdc!anne
-att510a|bct510a|AT&T 510A Personal Terminal,
- am, mir, msgr, xenl, xon,
- cols#80, lh#2, lines#24, lw#7, nlab#8,
- acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
- civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
- dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
- el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
- hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
- is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
- kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
- kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
- kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
- mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
- pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
- rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
- sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g,
+# It may be useful to assign two function keys with the
+# values \E=(\s look at old data in page 1
+# \E=W, look at bottom of page 1
+# where \s is a space ( ).
+#
+# Note:
+# The Wyse 60 runs faster when the XON/XOFF
+# handshake is turned off.
+#
+# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
+# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
+wy60|wyse60|Wyse 60,
+ am, bw, hs, km, mc5i, mir, msgr,
+ cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
+ acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+ bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
+ cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
+ ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=\r,
+ home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
+ ip=$<3>, is1=\EcB0\EcC1,
+ is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
+ \024\El,
+ is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
+ kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
+ kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
+ kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
+ mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
+ pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
+ pfx=\EZ1%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
+ rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
+ rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
+ rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
+ sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
+ %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
+ %{64}%|%;%?%p7%t%{1}%|%;%c,
+ sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
+ smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
+ tbc=\E0, tsl=\EF, kF1=^A`\r, kF10=^Ai\r, kF11=^Aj\r,
+ kF12=^Ak\r, kF13=^Al\r, kF14=^Am\r, kF15=^An\r, kF16=^Ao\r,
+ kF2=^Aa\r, kF3=^Ab\r, kF4=^Ac\r, kF5=^Ad\r, kF6=^Ae\r,
+ kF7=^Af\r, kF8=^Ag\r, kF9=^Ah\r, use=adm+sgr,
+#
+wy60-w|wyse60-w|wyse 60 132-column,
+ cols#132, lw#7, nlab#16, wsl#97,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
+ rs2=\EeF$<150>\E`;$<150>, use=wy60,
+#
+wy60-25|wyse60-25|wyse 60 80-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<200>, use=wy60,
+wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
+#
+wy60-42|wyse60-42|wyse 60 80-column 42-lines,
+ lines#42,
+ clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
+ dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
+ ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
+ ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
+wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
+ cols#132, lw#7, nlab#16, wsl#97,
+ clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
+ dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
+ nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
+#
+wy60-43|wyse60-43|wyse 60 80-column 43-lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\Ee+$<150>, use=wy60-42,
+wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\Ee+$<150>, use=wy60-42-w,
+#
+wy60-vb|wyse60-vb|Wyse 60 visible bell,
+ bel@, use=wy60,
+wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
+ bel@, use=wy60-w,
-# Terminfo entry for the AT&T 510 D Personal Terminal
-# Function keys 9 through 16 are accessed by bringing up the
-# system blocks.
-# Function key 9 corresponds to the leftmost touch target on the screen,
-# function key 16 corresponds to the rightmost.
+# The Wyse-99GT looks at lot like the Wyse 60 except that it
+# does not have the 42/43 line mode. In the Wyse-60 the "lines"
+# setup parameter controls the number of lines on the screen.
+# For the Wyse 99GT the "lines" setup parameter controls the
+# number of lines in a page. The screen can display 25 lines max.
+# The Wyse-99GT also has personalities for the VT220 and
+# Tektronix 4014. But this has no bearing on the native mode.
#
-# There are problems with soft key labeling. These are due to
-# strangenesses in the native terminal that are impossible to
-# describe in a terminfo.
-att510d|bct510d|AT&T 510D Personal Terminal,
- am, da, db, mir, msgr, xenl, xon,
- cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
- acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
- clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
- cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
- cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
- dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
- el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
- hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
- invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
- kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
- kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
- kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
- kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
- mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
- pln=\E[%p1%dp%p2%:-16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
- rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
- rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
- rs2=\E[5;0|, sc=\E7,
- sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
- smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
- smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
+# (msgr) should be set but the clear screen fails when in
+# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
+# then set msgr, else use msgr@.
+#
+# u0 -> enter Tektronix mode
+# u1 -> exit Tektronix mode
+#
+wy99gt|wyse99gt|Wyse 99gt,
+ msgr@,
+ clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
+ el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
+ il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
+ ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
+ u0=\E~>\E8, u1=\E[42h, use=wy60,
+#
+wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
+ cols#132, lw#7, nlab#16, wsl#97,
+ clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
+ dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
+ use=wy99gt,
+#
+wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
+#
+wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs2=\E`;$<150>, use=wy99gt-w,
+#
+wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
+ bel@, use=wy99gt,
+#
+wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
+ bel@, use=wy99gt-w,
-# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
-att500|att513|AT&T 513 using page mode,
- am, chts, mir, msgr, xenl, xon,
- cols#80, lh#2, lines#24, lw#8, nlab#8,
- acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
- clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
- csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
- hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
- indn=\E[%p1%dE, invis=\E[8m,
- is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
- kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
- kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
- kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
- kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
- kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
- kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
- kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
- kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
- kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
- kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
- khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
- kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
- kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
- kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
- ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
- mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
- nel=\EE,
- pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
- pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
- pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
- pln=\E[%p1%dp%p2%:-16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
- rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
- rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
- rmul=\E[m,
- rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
- rs2=\E[5;0|, sc=\E7,
- sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smir=\E[4h,
- smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
+# Can't set tabs! Other bugs (ANSI mode only):
+# - can't redefine function keys (anyway, key redefinition in ANSI mode
+# is too much complex to be described);
+# - meta key can't be described (the terminal forgets it when reset);
+# The xon-xoff handshaking can't be disabled while in ansi personality, so
+# emacs can't work at speed greater than 9600 baud. No padding is needed at
+# this speed.
+# dch1 has been commented out because it causes annoying glittering when
+# vi deletes one character at the beginning of a line with tabs in it.
+# dch makes sysgen(1M) have a horrible behaviour when deleting
+# a screen and makes screen(1) behave badly, so it is disabled too. The nice
+# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
+# not, so smir and rmir are commented out as well.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
+ am, km, mc5i, mir, msgr, xenl,
+ cols#80, it#8, lines#25, vt#3,
+ acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
+ cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
+ cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
+ cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
+ enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
+ il1=\E[L, ind=\n$<1>, invis=\E[8m,
+ is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
+ ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
+ kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
+ kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
+ kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
+ mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
+ rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
+ rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
+ ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
+ \E[4i,
+ sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
-# 01-07-88
-# printer must be set to EMUL ANSI to accept ESC codes
-# <cuu1> stops at top margin
-# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
-# and alt font ascii,wrap on,tabs cleared
-# <is2> disables newline on LF,Emphasized off
-# The <u0> capability sets form length
-att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
- xhpa, xvpa,
- bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
- orhi#100, orl#12, orvi#72,
- cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
- cr=^M,
- csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
- cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
- ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
- lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
- rshm=\E[m,
- scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
- smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
- smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
- u0=\E[%p1%dt, vpa=\E[%p1%dd,
+# This is the american terminal. Here tabs work fine.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
+ hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
-# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
-# The following SET-UP modes are assumed for normal operation:
-# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
-# Other SET-UP modes may be set for operator convenience or communication
-# requirements. This termcap description is for the Resident Terminal Mode.
-# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# The BRL entry also said: UNSAFE :ll=\E[70H:
-att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
- am, xon,
- cols#88, it#8, lines#70, vt#3,
- bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
- dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
- home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
- il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
- kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
- rs1=\Ec, sc=\E7,
+# This terminal (firmware version 02) has a lot of bugs:
+# - can't set tabs;
+# - other bugs in ANSI modes (see above).
+# This description disables handshaking when using cup. This is because
+# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
+# cannot be used at speeds greater than 9600 baud, because at greater
+# speeds handshaking is needed even for character sending. If you use
+# DTR handshaking, you can use even greater speeds.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ cols#80, it#8, lines#25, wsl#46,
+ acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
+ blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
+ cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
+ ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
+ flash=\E\^1$<30/>\E\^0, fsl=\r, home=^^, ht=^I, il1=\EE,
+ ind=\n, invis=\EG3,
+ is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
+ \^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er
+ \Ee"\EcD\024,
+ ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
+ kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
+ kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
+ kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
+ nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
+ rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
+ rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
+ 9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
+ \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
+ sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
+ %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
+ %p9%t\EcE%e\EcD%;,
+ sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
+ smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
-# 5620 terminfo (2.0 or later ROMS with char attributes)
-# The following SET-UP modes are assumed for normal operation:
-# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
-# Other SET-UP modes may be set for operator convenience or communication
-# requirements. This termcap description is for Resident Terminal Mode. No
-# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# assumptions: <ind> (scroll forward one line) is only done at screen bottom
-# Be aware that older versions of the dmd have a firmware bug that affects
-# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
-# <msgr> is from an otherwise inferior BRL for this terminal. That entry
-# also has <ll>=\E[70H commented out and marked unsafe.
-# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
-att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
- OTbs, am, msgr, npc, xon,
- cols#88, it#8, lines#70,
- bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
- cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
- indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
- pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
- rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
- sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
-att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
- lines#24, use=att5620,
-att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
- lines#34, use=att5620,
-# 5620 layer running the "S" system's downloaded graphics handler:
-att5620-s|tty5620-s|layer|vitty|5620 S layer,
- OTbs, OTpt, am,
- cols#80, it#8, lines#72,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
- cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
- el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
- kll=\E[70;1H,
+# This is the american terminal. Here tabs work.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
+ hts=\E1, tbc=\E0, use=wy99f,
-# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
#
-# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
-# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
-att605|AT&T 605 80 column 102key keyboard,
- am, eo, xon,
- cols#80, lines#24, lw#8, nlab#8, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
- cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
- dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
- il1=\E[L, ind=^J, invis=\E[8m,
- is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
- kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
- kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
- kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
- kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
- kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
- kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
- kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
- kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
- kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
- kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
- kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
- kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
- mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
- rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
- rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
- smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
- tsl=\E7\E[25;%i%p1%dx,
-att605-pc|ATT 605 in pc term mode,
- acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
- cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
- dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
- kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
- kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
- kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
- rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
- xonc=e, use=att605,
-att605-w|AT&T 605-w 132 column 102 key keyboard,
- cols#132, wsl#132,
- is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
- use=att605,
-# (att610: I added <rmam>/<smam> based on the init string. I also
-# added <indn> and <rin> because the BSD file says the att615s have them,
-# and the 615 is like a 610 with a big keyboard, and most of their other
-# smart terminals support the same sequence -- esr)
-att610|AT&T 610; 80 column; 98key keyboard,
- am, eslok, hs, mir, msgr, xenl, xon,
- cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
- indn=\E[%p1%dS, invis=\E[8m,
- is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
- is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
- kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
- kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
- kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
- kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
- nel=\EE,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
- ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
- rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
-att610-w|AT&T 610; 132 column; 98key keyboard,
- cols#132, wsl#132,
- is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
- use=att610,
-
-att610-103k|AT&T 610; 80 column; 103key keyboard,
- kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
- kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
- kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
- kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
- kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
- kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
- kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
- kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
- khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
- knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
- kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
- krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
- kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
-att610-103k-w|AT&T 610; 132 column; 103key keyboard,
- cols#132, wsl#132,
- is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
- use=att610-103k,
-att615|AT&T 615; 80 column; 98key keyboard,
- kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
- kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
- kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
- kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
- kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
- kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
- kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
-att615-w|AT&T 615; 132 column; 98key keyboard,
- kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
- kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
- kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
- kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
- kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
- kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
- kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
-att615-103k|AT&T 615; 80 column; 103key keyboard,
- kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
-att615-103k-w|AT&T 615; 132 column; 103key keyboard,
- kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
-# (att620: I added <rmam>/<smam> based on the init string and
-# <rin>/<indn> from a BSD termcap -- esr)
-att620|AT&T 620; 80 column; 98key keyboard,
- am, eslok, hs, mir, msgr, xenl, xon,
- cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
- indn=\E[%p1%dS, invis=\E[8m,
- is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
- is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
- kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
- kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
- kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
- kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
- kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
- kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
- kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
- kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
- kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
- kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
- mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
- ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
- rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
- rs2=\Ec\E[?3l, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
- sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
- smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
- tsl=\E7\E[25;%i%p1%dx,
-att620-w|AT&T 620; 132 column; 98key keyboard,
- cols#132, wsl#132,
- is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
- use=att620,
-att620-103k|AT&T 620; 80 column; 103key keyboard,
- kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
- kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
- kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
- kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
- kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
- kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
- kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
- kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
- kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
- kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
- kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
- kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
- kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
- kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
- kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
- ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
-
-att620-103k-w|AT&T 620; 132 column; 103key keyboard,
- cols#132, wsl#132,
- is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
- use=att620-103k,
-
-# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
-# The following SETUP modes are assumed for normal operation:
-# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
-# Font_Size=Large Non-Layers_Window_Cols=80
-# Non-Layers_Window_Rows=60
-# Other SETUP modes may be set for operator convenience or communication
-# requirements. Some capabilities assume a printer attached to the Aux EIA
-# port. This termcap description is for the Fixed Non-Layers Window. No
-# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
-att630|AT&T 630 windowing terminal,
- OTbs, am, da, db, mir, msgr, npc, xon,
- cols#80, it#8, lines#60, lm#0,
- bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
- dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
- el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
- kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
- kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
- kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
- kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
- kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
- mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
- rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
- rmul=\E[m, rs2=\Ec, sc=\E7,
- sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7%;m,
- sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
-att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
- lines#24, use=att630,
-
-# This is the att700 entry for 700 native emulation of the AT&T 700
-# terminal. Comments are relative to changes from the 605V2 entry and
-# att730 on which the entry is based. Comments show the terminfo
-# capability name, termcap name, and description.
-#
-# Here is what's going onm in the init string:
-# ESC [ 50;4| set 700 native mode (really is 605)
-# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
-# ESC [ 53;0| set GenFlow to Xon/Xoff
-# ESC [ 8 ;0| set CR on NL
-# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
-# ESC [ ? 4 l jump scroll
-# ESC [ ? 5 l/h video: normal (l); reverse (h)
-# ESC [ ?13 l Labels on
-# ESC [ ?15 l parity check = no
-# ESC [ 13 l monitor mode off
-# ESC [ 20 l LF on NL (not CRLF on NL)
-# ESC [ ? 7 h autowrap on
-# ESC [ 12 h local echo off
-# ESC ( B GO = ASCII
-# ESC ) 0 G1 = Special Char & Line Drawing
-# ESC [ ? 31 l Set 7 bit controls
-#
-# Note: Most terminals, especially the 600 family use Reverse Video for
-# standout mode. DEC also uses reverse video. The VT100 uses bold in addition
-# Assume we should stay with reverse video for 70.. However, the 605V2 exits
-# standout mode with \E[m (all normal attributes). The 730 entry simply
-# exits reverse video which would leave other current attributes intact. It
-# was assumed the 730 entry to be more correct so rmso has changed. The
-# 605V2 has no sequences to turn individual attributes off, thus its setting
-# and the rmso/smso settings from the 730.
+# The Wyse 160 is combination of the WY-60 and the WY-99gt.
+# The reset strings are slow and the pad times very depending
+# on other parameters such as font loading. I have tried
+# to follow the following outline:
#
-# Note: For the same reason as above in rmso I changed exit under-score mode
-# to specifically turn off underscore, rather than return to all normal
-# attributes
+# <rs1> -> set personality
+# <rs2> -> set number of columns
+# <rs3> -> set number of lines
+# <is1> -> select the proper font
+# <is2> -> do the initialization
+# <is3> -> set up display memory (2 pages)
#
-# Note: The following pkey_xmit is taken from the 605V2 which contained the
-# capability as pfxl. It was changed here to pfx since pfxl
-# will only compile successfully with Unix 4.0 tic. Also note that pfx only
-# allows strings to be parameters and label values must be programmed as
-# constant strings. Supposedly the pfxl of Version 4.0 allows both labels
-# and strings to be parameters. The 605V2 pfx entry should be examined later
-# in this regard. For reference the 730 pfxl entry is shown here for comparison
-# 730 pfx entry:
-# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
-# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
+# The display memory may be used for either text or graphics.
+# When "Display Memory = Shared" the terminal will have more pages
+# but garbage may be left on the screen when you switch from
+# graphics to text. If "Display Memory = Unshared" then the
+# text area will be only one page long.
#
-# (for 4.0 tic)
-# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
+# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
+wy160|wyse160|Wyse 160,
+ am, bw, hs, km, mc5i, mir, msgr,
+ cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
+ acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+ bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
+ cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
+ dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
+ el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=\r, home=\E{, ht=^I,
+ hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
+ is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
+ \024\El,
+ is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
+ kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
+ kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
+ kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
+ mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
+ pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
+ pfx=\EZ1%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
+ rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
+ rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
+ rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
+ sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
+ %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
+ %{64}%|%;%?%p7%t%{1}%|%;%c,
+ sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
+ smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
+ tbc=\E0, tsl=\EF, use=adm+sgr,
#
-# (for <4.0 tic)
-# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
+wy160-w|wyse160-w|wyse 160 132-column,
+ cols#132, lw#7, nlab#16, wsl#90,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
+ rs2=\EeF$<150>\E`;$<150>, use=wy160,
#
-# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
+wy160-25|wyse160-25|wyse 160 80-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<200>, use=wy160,
+wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
#
-# Port1 Interface
+wy160-42|wyse160-42|wyse 160 80-column 42-lines,
+ lines#42,
+ clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
+ ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
+ rs3=\Ee*$<150>, use=wy160,
+wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
+ cols#132, lw#7, nlab#16, wsl#90,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
+ rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
#
-# modular 10 pin Connector
-# Left side Right side
-# Pin 1 2 3 4 5 6 7 8 9 10
+wy160-43|wyse160-43|wyse 160 80-column 43-lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\Ee+$<150>, use=wy160-42,
+wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\Ee+$<150>, use=wy160-42-w,
#
-# Key (notch) at bottom
+wy160-vb|wyse160-vb|Wyse 160 visible bell,
+ bel@, use=wy160,
+wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
+ bel@, use=wy160-w,
#
-# Pin 1 DSR
-# 3 DCD
-# 4 DTR
-# 5 Sig Ground
-# 6 RD
-# 7 SD
-# 8 CTS
-# 9 RTS
-# 10 Frame Ground
+# The Wyse 75 is a vt100 lookalike without advanced video.
#
-# The manual is 189 pages and is loaded with details about the escape codes,
-# etc..... Available from AT&T CIC 800-432-6600...
-# ask for Document number 999-300-660..
+# The Wyse 75 can support one attribute (e.g. Dim, Inverse,
+# Underline) without magic cookies. The following description
+# uses this capability, but when more than one attribute is
+# put on the screen at once, all attributes will be changed
+# to be the same as the last attribute given.
+# The Wyse 75 can support more attributes when used with magic
+# cookies. The wy75-mc terminal description uses magic cookies
+# to correctly handle multiple attributes on a screen.
#
-att700|AT&T 700 24x80 column display w/102key keyboard,
- am, eslok, hs, mir, msgr, xenl, xon,
- cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
- fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
- is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
- is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
- kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
- kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
- kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
- kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
- kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
- kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
- kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
- kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
- kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
- kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
- kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
- mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
- pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
- rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
- rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
- smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
- tsl=\E7\E[99;%i%p1%dx,
-
-# This entry was modified 3/13/90 by JWE.
-# fixes include additions of <enacs>, correcting <rep>, and modification
-# of <kHOM>. (See comments below)
-# att730 has status line of 80 chars
-# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
-# the <kf25> and up keys are used for shifted system Fkeys
-# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
-# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
-# and 122 key keyboards, the 730's translation is \E[2J. For consistency
-# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
-# 102, 102+1, or 122 key keyboards
-# kHOM=\E[2J,
-# (att730: I added <rmam>/<smam> based on the init string -- esr)
-att730|AT&T 730 windowing terminal,
- am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
- cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
+wy75|wyse75|wyse 75,
+ am, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, lines#24, ma#1, pb#1201, wsl#78,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ bel=^G, cbt=\E[Z, clear=\E[H\E[J$<30>, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr$<2>, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
- home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
- ind=\ED, invis=\E[8m,
- is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
- is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
- kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
- kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
- kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
- kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
- kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
- kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
- kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
- kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
- kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
- kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
- kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
- mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
- pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
- pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
- rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
- rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[0t\E[2m,
+ dl=\E[%p1%dM$<1*>, dl1=\E[M,
+ dsl=\E[>\,\001\001\E[>-\001\001, ech=\E[%p1%dX,
+ ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E)0,
+ flash=\E[30h\E\,$<250/>\E[30l, fsl=^A, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@$<1*>,
+ il=\E[%p1%dL$<2*>, il1=\E[L$<2>, ind=\n$<2>, ip=$<1>,
+ is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
+ is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
+ kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
+ kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
+ kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
+ mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
+ rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
+ sc=\E7,
+ sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
+ \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
+ \016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
- swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
-att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
- lines#41, use=att730,
-att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
- lines#24, use=att730,
-att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
- flash=\E[?5l$<200>\E[?5h,
- is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
- use=att730,
-att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
- lines#41, use=att730r,
-att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
- lines#24, use=att730r,
-
-# The following represents the screen layout along with the associated
-# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
-# not appear on the screen but are shown to reference the bezel buttons.
-# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
-# position relative to the screen.
-#
-#
+ smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
+ tbc=\E[3g, tsl=\E[>\,\001, use=vt220+cvis,
+ use=vt220+keypad,
#
-# +----------------------------------------------------------------+
-# | |
-# XXXX | kf0 kf24 | XXXX
-# | |
-# | |
-# XXXX | kf1 kf23 | XXXX
-# | |
-# | |
-# XXXX | kf2 kf22 | XXXX
-# | |
-# | |
-# XXXX | kf3 kf21 | XXXX
-# | |
-# | |
-# XXXX | kf4 kf20 | XXXX
-# | |
-# | |
-# XXXX | kf5 kf19 | XXXX
-# | |
-# | |
-# XXXX | kf6 kf18 | XXXX
-# | |
-# | |
-# XXXX | | XXXX
-# | |
-# | |
-# +----------------------------------------------------------------+
+# This terminal description uses the non-hidden attribute mode
+# (with magic cookie).
#
-# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
+wy75-mc|wyse75-mc|wyse 75 with magic cookies,
+ msgr@,
+ ma@, xmc#1,
+ blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
+ rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
+ sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
+ %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
+ %t\016%e\017%;,
+ sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
+ use=wy75,
+wy75-vb|wyse75-vb|wyse 75 with visible bell,
+ pb@,
+ bel@, use=wy75,
+wy75-w|wyse75-w|wyse 75 in 132 column mode,
+ cols#132, wsl#130,
+ rs2=\E[35h\E[?3h$<80>, use=wy75,
+wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
+ pb@,
+ bel@, use=wy75-w,
#
-# Note: XXXX represents the screen buttons
-# CMD REDRAW
+# Wyse 85 emulating a vt220 7 bit mode.
+# 24 line screen with status line.
#
-# MAIL
+# The vt220 mode permits more function keys but it wipes out
+# the escape key. I strongly recommend that <f11> be set to
+# escape (esc).
+# The terminal may have to be set for 8 data bits and 2 stop
+# bits for the arrow keys to work.
+# The Wyse 85 runs faster with XON/XOFF enabled. Also the
+# <dch> and <ich> work best when XON/XOFF is set. <ich> and
+# <dch> leave trash on the screen when used without XON/XOFF.
#
-# version 1 note:
-# The character string sent by key 'kf26' may be user programmable
-# to send either \E[16s, or \E[26s.
-# The character string sent by key 'krfr' may be user programmable
-# to send either \E[17s, or \E[27s.
+wy85|wyse85|wyse 85,
+ am, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ clear=\E[H\E[J$<110>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
+ dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>,
+ dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>,
+ el=\E[K$<1>, el1=\E[1K, enacs=\E)0,
+ flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
+ home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>,
+ il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m,
+ ip=$<3>, is1=\E[62;1"p\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
+ is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
+ khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
+ mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
+ rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
+ rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
+ rs3=\E[?5l, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
+ %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+cvis,
+ use=vt220+keypad,
#
-# Depression of the "CMD" key sends \E! (kcmd)
-# Depression of the "MAIL" key sends \E[26s (kf26)
-# "REDRAW" same as "REFRESH" (krfr)
+# Wyse 85 with visual bell.
+wy85-vb|wyse85-vb|wyse 85 with visible bell,
+ bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
#
-# "kf" functions adds carriage return to output string if terminal is in
-# 'new line' mode.
+# Wyse 85 in 132-column mode.
+wy85-w|wyse85-w|wyse 85 in 132-column mode,
+ cols#132, wsl#132,
+ rs2=\E[35h$<70/>\E[?3h, use=wy85,
#
-# The following are functions not covered in the table above:
+# Wyse 85 in 132-column mode with visual bell.
+wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
+ bel@, use=wy85-w,
+
+# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
+# This copes with an apparent firmware bug in the wy85. He writes:
+# "What I did was change leave the terminal cursor keys set to Normal
+# (instead of application), and change \E[ to \233 for all the keys in
+# terminfo. At one point, I found some reference indicating that this
+# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
+# me), but I can't find that and the server under my bookmark to "Wyse
+# Technical" isn't responding. So there's the question of whether the wy85
+# terminfo should reflect the manufacturer's intended behaviour of the terminal
+# or the actual."
+wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
+ am, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ clear=\E[H\E[J$<110>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH$<1>,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
+ dch1=\E[P$<3>, dim=\E[2m, dl=\E[%p1%dM$<3*>,
+ dl1=\E[M$<3>, dsl=\E[40l, ech=\E[%p1%dX, ed=\E[J$<110>,
+ el=\E[K$<1>, el1=\E[1K, enacs=\E)0,
+ flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
+ home=\E[H, ht=\011$<1>, hts=\EH, ich=\E[%p1%d@$<4*>,
+ il=\E[%p1%dL$<5*>, il1=\E[L$<5>, ind=\n$<3>, invis=\E[8m,
+ ip=$<3>, is1=\E[62;1"p\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
+ is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
+ kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
+ kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
+ kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
+ kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
+ kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
+ kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
+ kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
+ khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
+ kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
+ mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
+ rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
+ rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
+ rs3=\E[?5l, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
+ %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+cvis,
#
-# Set keyboard character (SKC): \EPn1;Pn2w
-# Pn1= 0 Back Space key
-# Pn1= 1 Break key
-# Pn2= Program char (hex)
+# Wyse 185 emulating a vt320 7 bit mode.
#
-# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
-# Pn1= Window number (1-39)
-# Pn2-Pn5= Y;X;Y;X coordinates
+# This terminal always displays 25 lines. These lines may be used
+# as 24 data lines and a terminal status line (top or bottom) or
+# 25 data lines. The 48 and 50 line modes change the page size
+# and not the number of lines on the screen.
#
-# Screen Selection (SSL): \E[Pnu
-# Pn= Window number
+# The Compose Character key can be used as a meta key if changed
+# by set-up.
#
-# Set Terminal Modes (SM): \E[Pnh
-# Pn= 3 Graphics mode
-# Pn= > Cursor blink
-# Pn= < Enter new line mode
-# Pn= = Enter reverse insert/replace mode
-# Pn= ? Enter no scroll mode
+wy185|wyse185|wyse 185,
+ am, hs, km, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
+ dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
+ dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
+ el=\E[K, el1=\E[1K, enacs=\E)0,
+ flash=\E[30h\E\,$<100/>\E[30l, fsl=\E[1;24r\E8,
+ home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
+ ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
+ ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
+ is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
+ kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
+ lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
+ ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
+ rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
+ rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
+ %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
+ smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
+ use=vt220+keypad,
#
-# Reset Terminal Mode (RM): \E[Pnl
-# Pn= 3 Exit graphics mode
-# Pn= > Exit cursor blink
-# Pn= < Exit new line mode
-# Pn= = Exit reverse insert/replace mode
-# Pn= ? Exit no scroll mode
+# Wyse 185 with 24 data lines and top status (terminal status)
+wy185-24|wyse185-24|wyse 185 with 24 data lines,
+ hs@,
+ dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
+ use=wy185,
#
-# Screen Status Report (SSR): \E[Pnp
-# Pn= 0 Request current window number
-# Pn= 1 Request current window dimensions
+# Wyse 185 with visual bell.
+wy185-vb|wyse185-vb|wyse 185+flash,
+ bel@, use=wy185,
#
-# Device Status Report (DSR): \E[6n Request cursor position
+# Wyse 185 in 132-column mode.
+wy185-w|wyse185-w|wyse 185 in 132-column mode,
+ cols#132, wsl#132,
+ dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
+ ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
#
-# Call Status Report (CSR): \E[Pnv
-# Pn= 0 Call failed
-# Pn= 1 Call successful
+# Wyse 185 in 132-column mode with visual bell.
+wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
+ bel@, use=wy185-w,
+
+# wy325 terminfo entries
+# Done by Joe H. Davis 3-9-92
+
+# lines 25 columns 80
#
-# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
-# Pn1= Button number to be loaded
-# Pn2= Character count of "string"
-# Pn3= Key mode being loaded:
-# 0= Unshifted
-# 1= Shifted
-# 2= Control
-# String= Text string (15 chars max)
+wy325|wyse325|Wyse epc,
+ am, bw, hs, mc5i, mir,
+ cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
+ acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+ bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
+ cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
+ dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
+ flash=\E`8$<100/>\E`9, fsl=\r, home=^^, ht=^I, hts=\E1,
+ il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
+ is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024
+ \El,
+ is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
+ kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
+ kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
+ kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
+ mc0=\EP, mc4=^T, mc5=\Ed#,
+ pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
+ pfx=\EZ1%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
+ rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
+ rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
+ rs3=\EwG\Ee($<100>,
+ sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
+ %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
+ %{64}%|%;%?%p7%t%{1}%|%;%c,
+ sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
+ smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
+ tsl=\EF, use=adm+sgr,
+
#
-# Screen Number Report (SNR): \E[Pnp
-# Pn= Screen number
+# lines 24 columns 80 vb
#
-# Screen Dimension Report (SDR): \E[Pn1;Pn2r
-# Pn1= Number of rows available in window
-# Pn2= Number of columns available in window
+wy325-vb|wyse325-vb|wyse-325 with visual bell,
+ bel@, use=wy325,
+
#
-# Cursor Position Report (CPR): \E[Pn1;Pn2R
-# Pn1= "Y" Position of cursor
-# Pn2= "X" Position of cursor
+# lines 24 columns 132
#
-# Request Answer Back (RAB): \E[c
+wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
+ cols#132, lw#7, nlab#16, wsl#97,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
+ rs2=\E`;$<70>, use=wy325,
#
-# Answer Back Response (ABR): \E[?;*;30;VSV
-# *= 0 No printer available
-# *= 2 Printer available
-# V= Software version number
-# SV= Software sub version number
-# (printer-available field not documented in v1)
+# lines 25 columns 80
#
-# Screen Alignment Aid: \En
+wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy325,
#
-# Bell (lower pitch): \E[x
+# lines 25 columns 132
#
-# Dial Phone Number: \EPdstring\
-# string= Phone number to be dialed
+wy325-25w|wyse325-25w|wy325 132 columns,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
-# Set Phone Labels: \EPpstring\
-# string= Label for phone buttons
+# lines 25 columns 132 vb
#
-# Set Clock: \EPchour;minute;second\
+wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
+ bel@, use=wy325-w,
+
#
-# Position Clock: \EPsY;X\
-# Y= "Y" coordinate
-# X= "X" coordinate
+# lines 42 columns 80
#
-# Delete Clock: \Epr\
+wy325-42|wyse325-42|wyse-325 42 lines,
+ lh@, lines#42, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy325,
#
-# Programming The Function Buttons: \EPfPn;string\
-# Pn= Button number (00-06, 18-24)
-# (kf00-kf06, kf18-kf24)
-# string= Text to sent on button depression
+# lines 42 columns 132
#
-# The following in version 2 only:
+wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
+ lh@, lines#42, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
-# Request For Local Directory Data: \EPp12;\
+# lines 42 columns 132 vb
#
-# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
+wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
+ bel@, use=wy325-w,
#
-# Request for Local Directory Data in print format: \EPp13;\
+# lines 43 columns 80
#
-# Enable 'Prt on Line' mode: \022 (DC2)
+wy325-43|wyse325-43|wyse-325 43 lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, use=wy325,
#
-# Disable 'Prt on Line' mode: \024 (DC4)
+# lines 43 columns 132
#
-
-# 05-Aug-86:
-# The following Terminfo entry describes functions which are supported by
-# the AT&T 5430/pt505 terminal software version 2 and later.
-att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
- am, xon,
- cols#80, it#8, lines#24,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
- cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
- il=\E[%p1%dL, il1=\E[L, ind=^J,
- is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
- kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
- kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
- kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
- kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
- krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
- rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
- rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
- smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
-
-# The following Terminfo entry describes functions which are supported by
-# the AT&T 5430/pt505 terminal software version 1.
-att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
- lines#24,
- mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
-tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
- lines#22, use=att505,
+wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
-#### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
-# This cut mark helps make life less painful for people running ncurses tic
-# on machines with relatively little RAM. The file can be broken in half here
-# cleanly and compiled in sections -- no `use' references cross this cut
-# going forward.
+# lines 43 columns 132 vb
#
+wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
+ bel@, use=wy325-w,
-#### Ampex (Dialogue)
+# Wyse 370 -- 24 line screen with status line.
#
-# Yes, these are the same people who are better-known for making audio- and
-# videotape. I'm told they are located in Redwood City, CA.
+# The terminal may have to be set for 8 data bits and 2 stop
+# bits for the arrow keys to work.
#
-
-# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
-# (ampex80: some capabilities merged in from SCO's entry -- esr)
-ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
- OTbs, am, bw, ul,
- cols#80, it#8, lines#24,
- bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
- cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
- ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
- smso=\Ej, smul=\El, tbc=\E3,
-# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
-ampex175|ampex d175,
- am,
- cols#80, lines#24,
- bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
- is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
- kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
- rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
-# No backspace key in the main QWERTY cluster. Fortunately, it has a
-# NEWLINE/PAGE key just above RETURN that sends a strange single-character
-# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
-# mode), this key can be used as the erase key; I find I like this. Because
-# some people and some systems may not, there is another termcap ("ampex175")
-# that suppresses this little eccentricity by omitting the relevant capability.
-ampex175-b|ampex d175 using left arrow for erase,
- kbs=^_, use=ampex175,
-# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
-# (ampex210: removed obsolete ":kn#10:" -- esr)
-ampex210|a210|ampex a210,
- OTbs, am, hs, xenl,
- cols#80, it#8, lines#24, xmc#1,
- cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
- fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
- if=/usr/share/tabset/std, il1=\EE, invis@,
- is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
- kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
- kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
- kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
- tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
-# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
-# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
-# and moved the padding to be *after* the caps -- esr)
-ampex219|ampex-219|amp219|Ampex with Automargins,
- hs, xenl,
- cols#80, it#8, lines#24,
- bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
- clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
- csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
- cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
- cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
- el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
- is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
- kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
- kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
- rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
- rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
- smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
-ampex219w|ampex-219w|amp219w|Ampex 132 cols,
- cols#132, lines#24,
- bel=^G, cr=^M, cud1=^J, ind=^J,
- is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
-# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
-ampex232|ampex-232|Ampex Model 232,
- am,
- cols#80, lines#24, xmc#1,
- cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
- cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
- flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
- invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
- kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
- kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
- kf9=^AI\r, khome=^^, use=adm+sgr,
-# (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
-ampex232w|Ampex Model 232 / 132 columns,
- cols#132, lines#24,
- is2=\E\034Eg\El, use=ampex232,
-
-#### Ann Arbor (aa)
-#
-# Ann Arbor made dream terminals for hackers -- large screen sizes and huge
-# numbers of function keys. At least some used monitors in portrait mode,
-# allowing up to 76-character screen heights! They were reachable at:
-#
-# Ann Arbor Terminals
-# 6175 Jackson Road
-# Ann Arbor, MI 48103
-# (313)-663-8000
-#
-# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
-# can't be found on the Web; I fear they're long dead. R.I.P.
-#
-
-
-# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
-# Highly modified 6/22 by Mike O'Brien.
-# split out into several for the various screen sizes by dave-yost@rand
-# Modifications made 3/82 by Mark Horton
-# Modified by Tom Quarles at UCB for greater efficiency and more diversity
-# status line moved to top of screen, <flash> removed 5/82
-# Some unknown person at SCO then hacked the init strings to make them more
-# efficient.
-#
-# assumes the following setup:
-# A menu: 0000 1010 0001 0000
-# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
-# C menu: 56 66 0 0 9600 0110 1100
-# D menu: 0110 1001 1 0
-#
-# Briefly, the settings are for the following modes:
-# (values are for bit set/clear with * indicating our preference
-# and the value used to test these termcaps)
-# Note that many of these settings are irrelevent to the terminfo
-# and are just set to the default mode of the terminal as shipped
-# by the factory.
+# If you change keyboards the terminal will send different
+# escape sequences.
+# The following definition is for the basic terminal without
+# function keys.
#
-# A menu: 0000 1010 0001 0000
-# Block/underline cursor*
-# blinking/nonblinking cursor*
-# key click/no key click*
-# bell/no bell at column 72*
+# <u0> -> enter Tektronix 4010/4014 mode
+# <u1> -> exit Tektronix 4010/4014 mode
+# <u2> -> enter ASCII mode (from any ANSI mode)
+# <u3> -> exit ASCII mode (goto native ANSI mode)
+# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
+# <u5> -> exit Tek 4207 mode (goto native ANSI mode)
#
-# key pad is cursor control*/key pad is numeric
-# return and line feed/return for <cr> key *
-# repeat after .5 sec*/no repeat
-# repeat at 25/15 chars per sec. *
+# Bug: The <op> capability resets attributes.
+wy370-nk|wyse 370 without function keys,
+ am, ccc, hs, mc5i, mir, msgr, xenl, xon,
+ colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
+ dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
+ dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
+ el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
+ flash=\E[30h\E\,$<300/>\E[30l, fsl=\E[1;24r\E8,
+ home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
+ ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
+ ind=\n$<2>,
+ initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e
+ %p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3
+ %{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}
+ %<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;
+ %{1}%+%+%+%dw,
+ invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
+ is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
+ is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
+ mc5=\E[5i,
+ oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w
+ \E[66;5;51w\E[66;6;61w\E[66;7;64w,
+ op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
+ rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
+ rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
+ rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
+ %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
+ smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
+ u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
+ u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
#
-# hold data until pause pressed/process data unless pause pressed*
-# slow scroll/no slow scroll*
-# Hold in area/don't hold in area*
-# functions keys have default*/function keys disabled on powerup
+# Function key set for the ASCII (wy-50 compatible) keyboard
+# This is the default 370.
#
-# show/don't show position of cursor during page transmit*
-# unused
-# unused
-# unused
+wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
+ kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
+ knp=\E[U, kpp=\E[V, use=wy370-nk,
#
-# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
-# Baud rate (9600*)
+# Function key set for the VT-320 (and wy85) compatible keyboard
#
-# 2 bits of parity - 00=odd,01=even*,10=space,11=mark
-# 1 stop bit*/2 stop bits
-# parity error detection off*/on
+wy370-105k|Wyse 370 with 105 key keyboard,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
+ use=wy370-nk, use=vt220+keypad,
#
-# keyboard local/on line*
-# half/full duplex*
-# disable/do not disable keyboard after data transmission*
+# Function key set for the PC compatible keyboard
#
-# transmit entire page/stop transmission at cursor*
-# transfer/do not transfer protected characters*
-# transmit all characters/transmit only selected characters*
-# transmit all selected areas/transmit only 1 selected area*
+wy370-EPC|Wyse 370 with 102 key keyboard,
+ kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
#
-# transmit/do not transmit line separators to host*
-# transmit/do not transmit page tab stops tabs to host*
-# transmit/do not transmit column tab stop tabs to host*
-# transmit/do not transmit graphics control (underline,inverse..)*
+# Wyse 370 with visual bell.
+wy370-vb|Wyse 370 with visible bell,
+ bel@, use=wy370,
#
-# enable*/disable auto XON/XOFF control
-# require/do not require receipt of a DC1 from host after each LF*
-# pause key acts as a meta key/pause key is pause*
-# unused
+# Wyse 370 in 132-column mode.
+wy370-w|Wyse 370 in 132-column mode,
+ cols#132, wsl#132,
+ rs2=\E[35h\E[?3h$<70>, use=wy370,
#
-# unused
-# unused
-# unused
-# unused
+# Wyse 370 in 132-column mode with visual bell.
+wy370-wvb|Wyse 370 with visible bell 132-columns,
+ flash=\E[30h\E\,$<300/>\E[30l, use=wy370-w,
+wy370-rv|Wyse 370 reverse video,
+ rs3=\E[32h\E[?5h, use=wy370,
#
-# XON character (17*)
-# XOFF character (19*)
+# Wyse 99gt Tektronix 4010/4014 emulator,
#
-# C menu: 56 66 0 0 9600 0110 1100
-# number of lines to print data on (printer) (56*)
+wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
+ am, os,
+ cols#74, lines#35,
+ bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
+ cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
+ %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
+ %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
+ %{31}%&%{64}%+%c\037,
+ cuu1=^K, ff=^L,
+ hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
+ \037,
+ home=^]7`x @\037,
+ hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
+ \037,
+ is2=\E8, nel=\r\n, u0=\E~>\E8, u1=\E[42h,
#
-# number of lines on a sheet of paper (printer) (66*)
+# Wyse 160 Tektronix 4010/4014 emulator,
#
-# left margin (printer) (0*)
+wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
+ cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}
+ %&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}
+ %/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/
+ %{31}%&%{64}%+%c\037,
+ home=^]8`g @\037, use=wy99gt-tek,
#
-# number of pad chars on new line to printer (0*)
+# Wyse 370 Tektronix 4010/4014 emulator,
#
-# printer baud rate (9600*)
+wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
+ am, os,
+ cols#80, lines#36,
+ bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s,
+ cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/
+ %Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}
+ %/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
+ cuu1=^K, ff=^L,
+ hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
+ \037,
+ home=^]8g @\037,
+ hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
+ \037,
+ is2=\E8, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^I, kcuu1=^K,
+ nel=\r\n, u0=\E[?38h\E8, u1=\E[?38l\E)0,
+
+# Vendor-supplied Wyse entries end here.
+
#
-# printer parity: 00=odd,01=even*,10=space,11=mark
-# printer stop bits: 2*/1
-# print/do not print guarded areas*
+#TITLE: TERMINFO ENTRY WY520
+#DATE: 8/5/93
+# The WY520 terminfo is based on the WY285 entry published on the WYSE
+# BBS with the addition of more function keys and special keys.
#
-# new line is: 01=LF,10=CR,11=CRLF*
-# unused
-# unused
+# rs1 -> set personality
+# rs2 -> set number of columns
+# rs3 -> set number of lines
+# is1 -> select the proper font
+# is2 -> do the initialization
+# is3 -> If this string is empty then rs3 gets sent.
#
-# D menu: 0110 1001 1 0
-# LF is newline/LF is down one line, same column*
-# wrap to preceding line if move left from col 1*/don't wrap
-# wrap to next line if move right from col 80*/don't wrap
-# backspace is/is not destructive*
+# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
+# - The BS key is programmed to generate BS in smcup since
+# is2 doesn't seem to work.
+# - Remove and shift/Remove: delete a character
+# - Insert : enter insert mode
+# - Find : delete to end of file
+# - Select : clear a line
+# - F11, F12, F13: send default sequences (not ESC, BS, LF)
+# - F14 : Home key
+# - Bottom status line (host writable line) is used.
+# - smkx,rmkx are removed because this would put the numeric
+# keypad in Dec application mode which doesn't seem to work
+# with SCO applications.
#
-# display*/ignore DEL character
-# display will not/will scroll*
-# page/column tab stops*
-# erase everything*/erase unprotected only
+wy520|wyse520|wyse 520,
+ am, hs, km, mc5i, mir, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
+ dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
+ ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
+ enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
+ hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
+ il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
+ is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
+ kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
+ kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
+ lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
+ rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
+ rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
+ rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
+ %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
+ smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
+ vpa=\E[%i%p1%dd, use=vt220+keypad,
#
-# editing extent: 0=display,1=line*,2=field,3=area
+# Wyse 520 with 24 data lines and status (terminal status)
+wy520-24|wyse520-24|wyse 520 with 24 data lines,
+ hs@,
+ dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
+ use=wy520,
#
-# unused
+# Wyse 520 with visual bell.
+wy520-vb|wyse520-vb|wyse 520 with visible bell,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520,
+#
+# Wyse 520 in 132-column mode.
+wy520-w|wyse520-w|wyse 520 in 132-column mode,
+ cols#132, wsl#132,
+ dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
+ ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
+#
+# Wyse 520 in 132-column mode with visual bell.
+wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520-w,
+#
+#
+# Wyse 520 emulating a vt420 7 bit mode.
+# The DEL key is programmed to generate BS in is2.
+# With EPC keyboard.
+# - 'End' key will clear till end of line on EPC keyboard
+# - Shift/End : ignored.
+# - Insert : enter insert mode.
+# - Delete : delete a character (have to change interrupt character
+# to CTRL-C: stty intr '^c') for it to work since the
+# Delete key sends 7FH.
+wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
+ kdch1=^?, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
+ kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
+ use=wy520,
+#
+# Wyse 520 with 24 data lines and status (terminal status)
+# with EPC keyboard.
+wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
+ hs@,
+ dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
+ use=wy520-epc,
+#
+# Wyse 520 with visual bell.
+wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc,
+#
+# Wyse 520 in 132-column mode.
+wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
+ cols#132, wsl#132,
+ dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
+ ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
+#
+# Wyse 520 in 132-column mode with visual bell.
+wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
+ flash=\E[30h\E\,$<100/>\E[30l, use=wy520-epc-w,
+#
+# Wyse 520 in 80-column, 36 lines
+wy520-36|wyse520-36|wyse 520 with 36 data lines,
+ hs@,
+ lines#36,
+ dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
+ use=wy520,
+#
+# Wyse 520 in 80-column, 48 lines
+wy520-48|wyse520-48|wyse 520 with 48 data lines,
+ hs@,
+ lines#48,
+ dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
+ use=wy520,
+#
+# Wyse 520 in 132-column, 36 lines
+wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
+ use=wy520-36,
+#
+# Wyse 520 in 132-column, 48 lines
+wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
+ use=wy520-48,
+#
+#
+# Wyse 520 in 80-column, 36 lines with EPC keyboard
+wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
+ hs@,
+ lines#36,
+ dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
+ use=wy520-epc,
+#
+# Wyse 520 in 80-column, 48 lines with EPC keyboard
+wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
+ hs@,
+ lines#48,
+ dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
+ use=wy520-epc,
+#
+# Wyse 520 in 132-column, 36 lines with EPC keyboard
+wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
+ use=wy520-36pc,
#
+# Wyse 520 in 132-column, 48 lines with EPC keyboard
+wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
+ cols#132, wsl#132,
+ rs2=\E[?3h,
+ rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
+ use=wy520-48pc,
-annarbor4080|aa4080|ann arbor 4080,
+# From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
+# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
+# file and we don't know what <hts> is -- esr)
+wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
OTbs, am,
- cols#80, lines#40,
- bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
- cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
- cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
- kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
+ dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=\n,
+ is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=\n, kcuf1=^F,
+ kcuu1=^Z, khome=^A, ll=^A^Z, nel=\r\n, rmir=\Er, rmso=^O,
+ rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
+ smul=^N,
-# Strange Ann Arbor terminal from BRL
-aas1901|Ann Arbor K4080 w/S1901 mod,
- am,
- cols#80, lines#40,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
- home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
- nel=^M^J,
+wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
+ is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
+ use=wy75,
-# If you're using the GNU termcap library, add
-# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
-# to these capabilities. This is the nonstandard GNU termcap scrolling
-# capability, arguments are:
-# 1. Total number of lines on the screen.
-# 2. Number of lines above desired scroll region.
-# 3. Number of lines below (outside of) desired scroll region.
-# 4. Total number of lines on the screen, the same as the first parameter.
-# The generic Ann Arbor entry is the only one that uses this.
-aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
- OTbs, am, km, mc5i, mir, xon,
- cols#80, it#8,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
- clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
- hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
- il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
- is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
- kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
- kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
- kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
- kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
- kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
- khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
- mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
- rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
- rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
- sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
- sgr0=\E[m,
- smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
- smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%p1%{1}%+%dd,
+# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
+wy100q|Wyse 100 for Quotron,
+ OTbs,
+ cols#80, lines#24, xmc#1,
+ cbt=\EI, clear=^Z, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
+ is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=\n,
+ kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
-aaa+rv|ann arbor ambassador in reverse video,
- blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
- is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
- rs1=\E[H\E[7m\E[J$<156>,
- sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;%;%?%p7%t8;%;m\016,
- sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
-# Ambassador with the DEC option, for partial vt100 compatibility.
-aaa+dec|ann arbor ambassador in dec vt100 mode,
- acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
- csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
- sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
- smacs=^O,
-aaa-18|ann arbor ambassador/18 lines,
- lines#18,
- is2=\E7\E[60;0;0;18p\E8,
- rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
- use=aaa+unk,
-aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
- use=aaa+rv, use=aaa-18,
-aaa-20|ann arbor ambassador/20 lines,
- lines#20,
- is2=\E7\E[60;0;0;20p\E8,
- rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
- use=aaa+unk,
-aaa-22|ann arbor ambassador/22 lines,
- lines#22,
- is2=\E7\E[60;0;0;22p\E8,
- rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
- use=aaa+unk,
-aaa-24|ann arbor ambassador/24 lines,
- lines#24,
- is2=\E7\E[60;0;0;24p\E8,
- rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
- use=aaa+unk,
-aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
- use=aaa+rv, use=aaa-24,
-aaa-26|ann arbor ambassador/26 lines,
- lines#26,
- is2=\E7\E[60;0;0;26p\E8,
- rmcup=\E[60;0;0;26p\E[26;1H\E[K,
- smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
-aaa-28|ann arbor ambassador/28 lines,
- lines#28,
- is2=\E7\E[60;0;0;28p\E8,
- rmcup=\E[60;0;0;28p\E[28;1H\E[K,
- smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
-aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
- eslok, hs,
- lines#29,
- dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
- fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
- rmcup=\E[60;1;0;30p\E[29;1H\E[K,
- smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
- tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
-aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
- use=aaa+rv, use=aaa-30-s,
-aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
- rmcup=\E[60;1;0;30p\E[59;1H\E[K,
- smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
-aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
- rmcup=\E[60;1;0;30p\E[59;1H\E[K,
- smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
-aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
- lines#30,
- is2=\E7\E[60;0;0;30p\E8,
- rmcup=\E[60;0;0;30p\E[30;1H\E[K,
- smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
-aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
- use=aaa+rv, use=aaa-30,
-aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
- rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
- use=aaa-30,
-aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
- rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
- use=aaa+rv, use=aaa-30,
-aaa-36|ann arbor ambassador/36 lines,
- lines#36,
- is2=\E7\E[60;0;0;36p\E8,
- rmcup=\E[60;0;0;36p\E[36;1H\E[K,
- smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
-aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
- use=aaa+rv, use=aaa-36,
-aaa-40|ann arbor ambassador/40 lines,
- lines#40,
- is2=\E7\E[60;0;0;40p\E8,
- rmcup=\E[60;0;0;40p\E[40;1H\E[K,
- smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
-aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
- use=aaa+rv, use=aaa-40,
-aaa-48|ann arbor ambassador/48 lines,
- lines#48,
- is2=\E7\E[60;0;0;48p\E8,
- rmcup=\E[60;0;0;48p\E[48;1H\E[K,
- smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
-aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
- use=aaa+rv, use=aaa-48,
-aaa-60-s|ann arbor ambassador/59 lines+status,
- eslok, hs,
- lines#59,
- dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
- fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
- tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
-aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
- use=aaa+rv, use=aaa-60-s,
-aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
- use=aaa+dec, use=aaa+rv, use=aaa-60-s,
-aaa-60|ann arbor ambassador/60 lines,
- lines#60,
- is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
- use=aaa+unk,
-aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
- use=aaa+rv, use=aaa-60,
-aaa-db|ann arbor ambassador 30/destructive backspace,
- OTbs@,
- cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
+#### Kermit terminal emulations
+#
+# Obsolete Kermit versions may be listed in the section describing obsolete
+# non-ANSI terminal emulators later in the file.
+#
-guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
- lines#33,
- flash=\E[>59h$<100>\E[>59l,
- is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
- rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
-guru+rv|guru changes for reverse video,
- flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
-guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
- use=guru+rv, use=guru-33,
-guru+s|guru status line,
- eslok, hs,
- dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
- rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
- tsl=\E[>51h\E[1;%p1%dH\E[2K,
-guru-nctxt|guru with no saved context,
- smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
-guru-s|guru-33-s|ann arbor guru/33 lines+status,
- lines#32,
- is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
- smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
-guru-24|ann arbor guru 24 lines,
+# KERMIT standard all versions.
+# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
+# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 9-25-84
+kermit|standard kermit,
+ OTbs,
cols#80, lines#24,
- is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
- use=guru+unk,
-guru-44|ann arbor guru 44 lines,
- cols#97, lines#44,
- is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
- use=guru+unk,
-guru-44-s|ann arbor guru/44 lines+status,
- lines#43,
- is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
- smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
-guru-76|guru with 76 lines by 89 cols,
- cols#89, lines#76,
- is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
- use=guru+unk,
-guru-76-s|ann arbor guru/76 lines+status,
- cols#89, lines#75,
- is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
- smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
-guru-76-lp|guru-lp|guru with page bigger than line printer,
- cols#134, lines#76,
- is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
- use=guru+unk,
-guru-76-w|guru 76 lines by 178 cols,
- cols#178, lines#76,
- is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
- use=guru+unk,
-guru-76-w-s|ann arbor guru/76 lines+status+wide,
- cols#178, lines#75,
- is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
- smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
-guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
- cols#178, lines#76,
- is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
- use=guru+unk,
-aaa-rv-unk|ann arbor unknown type,
- lh#0, lw#0, nlab#0,
- blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
- is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
- rs1=\E[H\E[7m\E[J,
- sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t7;%;%?%p7%t8;%;m,
- sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
+ clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
+kermit-am|standard kermit plus auto-margin,
+ am,
+ is2=K1 Standard Kermit plus Automatic Margins\n,
+ use=kermit,
+# IBMPC Kermit 1.2.
+# Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
+# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
+# line).
+# From: greg small <gts@populi.berkeley.edu> 8-30-84
+pckermit|pckermit12|UCB IBMPC Kermit 1.2,
+ am,
+ lines#25,
+ clear=\EH\EJ, ed@, el@,
+ is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
+# IBMPC Kermit 1.20
+# Cannot use line 25, now acts funny like ansi special scrolling region.
+# Initialization must escape from that region by cursor position to line 24.
+# Cannot use character insert because 1.20 goes crazy if insert at col 80.
+# Does not use :am: because autowrap is lost when kermit dropped and restarted.
+# From: greg small <gts@populi.berkeley.edu> 12-19-84
+pckermit120|UCB IBMPC Kermit 1.20,
+ it#8, lines#24,
+ cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
+ il1=\EL,
+ is2=\EO\Eq\EJ\EY7\sK3\sUCB\sIBMPC\sKermit\s1.20\s\s12-19-84
+ \n,
+ rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
+# MS-DOS Kermit 2.27 for the IBMPC
+# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
+# Cannot use line 25, now acts funny like ansi special scrolling region.
+# Initialization must escape from that region by cursor position to line 24.
+# Does not use am: because autowrap is lost when kermit dropped and restarted.
+# Reverse video for standout like H19.
+# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 3-17-85
+msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
+ OTbs, am@,
+ cols#80, it#8, lines#24,
+ clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+ cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
+ home=\EH, ht=^I, il1=\EL,
+ is2=\EO\Eq\EG\Ew\EJ\EY7\sK4\sMS\sKermit\s2.27\sfor\sthe
+ \sIBMPC\s3-17-85\n,
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
+ rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
+# MS-DOS Kermit 2.27 with automatic margins
+# From: greg small <gts@populi.berkeley.edu> 3-17-85
+msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
+ am,
+ cvvis=\EO\Eq\EG\EvK5,
+ is2=\EO\Eq\EG\Ev\EJ\EY7\sK5\sMS\sKermit\s2.27\s+automatic
+ \smargins\s3-17-85\n,
+ use=msk227,
+# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
+# Automatic margins now default. Use ansi <sgr> for highlights.
+# Define function keys.
+# (msk22714: removed obsolete ":kn#10:" -- esr)
+# From: greg small <gts@populi.berkeley.edu> 3-17-85
+msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
+ am,
+ bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
+ is2=\EO\Eq\EG\Ev\EJ\EY7\sK6\sMS\sKermit\s2.27\sUCB\s227.14
+ \sIBM\sPC\s3-17-85\n,
+ kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
+ kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
+# This was designed for a VT320 emulator, but it is probably a good start
+# at support for the VT320 itself.
+# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
+# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
+vt320-k3|MS-Kermit 3.00's vt320 emulation,
+ am, eslok, hs, km, mir, msgr, xenl,
+ cols#80, it#8, lines#49, pb#9600, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cmdch=\E,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ flash=\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[?5l\E[?5h$<100/>\E[
+ ?5l,
+ fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
+ kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=\r\n, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
+ rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
+ rs1=\E(B\E)B\E>\E\sF\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h
+ \E[4i\E[?4i\E[m\E[r\E[2$~,
+ sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, use=vt220+cvis,
-#### Applied Digital Data Systems (adds)
+# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
+# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
+# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
+vt320-k311|dec vt320 series as defined by kermit 3.11,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
+ flash=\E[?5h$<100/>\E[?5l, fsl=\E[$}, home=\E[H, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>,
+ ind=\ED,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
+ lf3=pf3, lf4=pf4, nel=\r\ED, rc=\E8, rev=\E[7m,
+ rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
+ smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
+ use=vt220+cvis,
+
+######## NON-ANSI TERMINAL EMULATIONS
#
-# ADDS itself is long gone. ADDS was bought by NCR, and the same group made
-# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
-# terminals was merged again. Then AT&T sold the terminal business to
-# SunRiver, which later changed its name to Boundless Technologies. The
-# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
-# as of early 1995) are at:
+
+#### Avatar
#
-# Boundless Technologies
-# 100 Marcus Boulevard
-# Hauppauge, NY 11788-3762
-# Vox: (800)-231-5445
-# Fax: (516)-342-7378
-# Web: http://boundless.com
+# These entries attempt to describe Avatar, a terminal emulation used with
+# MS-DOS bulletin-board systems. It was designed to give ANSI-like
+# capabilities, but with cheaper (shorter) control sequences. Messy design,
+# excessively dependent on PC idiosyncrasies, but apparently rather popular
+# in the BBS world.
#
-# Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
-# In 1995 Boundless acquired DEC's terminals business.
+# No color support. Avatar doesn't fit either of the Tektronix or HP color
+# models that terminfo knows about. An Avatar color attribute is the
+# low 7 bits of the IBM-PC display-memory attribute. Bletch.
#
+# I wrote these entries while looking at the Avatar spec. I don't have
+# the facilities to test them. Let me know if they work, or don't.
+#
+# Avatar escapes not used by these entries (because maybe you're smarter
+# and more motivated than I am and can figure out how to wrap terminfo
+# around some of them, and because they are weird enough to be funny):
+# level 0:
+# ^L -- clear window/reset current attribute to default
+# ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
+#
+# bit: 6 5 4 3 2 1 0
+# | | | | |
+# +---+---+ | +---+---+
+# | | |
+# | | foreground color
+# | foreground intensity
+# background color
+# level 0+:
+# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
+# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
+# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
+# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
+# (^V^L and ^V^M set the current attribute as a side-effect.)
+# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
+# in the pattern, <c> the number of times the pattern
+# should be repeated. If either value is 0, no-op.
+# The pattern can contain Avatar console codes,
+# including other ^V ^Y patterns.
+# level 1:
+# ^V^O -- clockwise mode on; turn print direction right each time you
+# hit a window edge (yes, really). Turned off by CR
+# ^V^P -- no-op
+# ^V^Q%c -- query the driver
+# ^V^R -- driver reset
+# ^V^S -- Sound tone (PC-specific)
+# ^V^T -- change highlight at current cursor position to %c
+# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
+# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
+# -- define window
+#
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
+# tell ncurses that the corresponding highlights exist; it should use <sgr>,
+# which is the only method that will actually work for multiple highlights.)
+#
+# Update by TD - 2004: half of this was inconsistent. Found documentation
+# and repaired most of the damage. sgr0 is probably incorrect, but the
+# available documentation gives no clues for a workable string.
+avatar0|avatar terminal emulator level 0,
+ am, bce, msgr,
+ cols#80, it#8, lines#25,
+ blink=^V^B, bold=^V^A^P, cr=\r, cub1=^V^E, cud1=^V^D,
+ cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
+ ind=\n, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
+ rmacs@, rs2=^L,
+ sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?
+ %p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t
+ %{16}%|%;%;%c%;%?%p4%t\026\002%;,
+ sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
+ use=klone+acs,
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+avatar0+|avatar terminal emulator level 0+,
+ dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
+# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
+avatar|avatar1|avatar terminal emulator level 1,
+ civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
+ rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
-# Regent: lowest common denominator, works on all regents.
-# (regent: renamed ":bc:" to ":le:" -- esr)
-regent|Adds Regent Series,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
- home=\EY\s\s, ind=^J, ll=^A,
-# Regent 100 has a bug where if computer sends escape when user is holding
-# down shift key it gets confused, so we avoid escape.
-regent100|Adds Regent 100,
- xmc#1,
- bel=^G,
- cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
- kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
- kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
- lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
- sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
-regent20|Adds Regent 20,
- bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
- use=regent,
-regent25|Adds Regent 25,
- bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
- use=regent20,
-regent40|Adds Regent 40,
- xmc#1,
- bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
- kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
- kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
- lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
- smul=\E0`, use=regent25,
-regent40+|Adds Regent 40+,
- is2=\EB, use=regent40,
-regent60|regent200|Adds Regent 60,
- dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
- rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
- use=regent40+,
-# From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
-# (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
-viewpoint|addsviewpoint|adds viewpoint,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
- cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
- cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
- ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
- kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
- rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
-# Some viewpoints have bad ROMs that foo up on ^O
-screwpoint|adds viewpoint with ^O bug,
- cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
-
-# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
-# The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
-# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
-# underline=01100000, rev=01010000, blink=01000010,dim=01000001,
-# invis=01000100 and %c is the logical or of desired attributes.
-# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
+#### RBcomm
#
-# Update by TD - 2004:
-# Adapted from
-# http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
+# RBComm is a lean and mean terminal emulator written by the Interrupt List
+# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
+# '90s), especially in the BBS world, and still has some loyal users due to
+# its very small memory footprint and to a cute macro language.
+rbcomm|IBM PC with RBcomm and EMACS keybindings,
+ am, bw, mir, msgr, xenl,
+ cols#80, it#8, lines#25,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=^L, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^C, cuf1=^B,
+ cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
+ dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
+ il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
+ is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
+ kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=\r\ED,
+ rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
+ rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
+ rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
+ smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
+ use=vt220+cvis,
+rbcomm-nam|IBM PC with RBcomm without autowrap,
+ am@,
+ bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
+ is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
+ kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
+rbcomm-w|IBM PC with RBcomm in 132 column mode,
+ cols#132,
+ bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n,
+ is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
+ kcub1=^H, kcud1=\n, nel=\r\n, use=rbcomm,
+
+######## LCD DISPLAYS
#
-# COMMANDS ASCII CODE
+
+#### Matrix Orbital
+# from: Eric Z. Ayers (eric@ale.org)
#
-# Address, Absolute ESC,=,row,column
-# Beep BEL
-# Aux Port Enable ESC,@
-# Aux Port Disable ESC,A
-# Backspace BS
-# Cursor back BS
-# Cursor down LF
-# Cursor forward FF
-# Cursor home RS
-# Cursor up VT
-# Cursor supress ETB
-# Cursor enable CAN
-# Erase to end of line ESC,T
-# Erase to end of page ESC,Y
-# Erase screen SUB
-# Keyboard lock SI
-# Keyboard unlock SO
-# Read current cursor position ESC,?
-# Set Attribute ESC,0,x (see below for values of x)
-# Tag bit reset ESC,(
-# Tag bit set ESC,)
-# Transparent Print on ESC,3
-# Transparent Print off ESC,4
+# Matrix Orbital 20x4 LCD display
+# Command Character is 0xFE (decimal 254, octal 376)
#
+# On this device, cursor addressability isn't possible. The LCD expects:
+# 0xfe G <col> <row>
+# for cup: %p1 == row and %p2 is column
#
-# ATTRIBUTES
+# This line:
+# cup=\376G%p2%c%p1%c
+# LOOKS like it will work, but sometimes only one of the two numbers is sent.
+# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
#
-# Normal @ 0100
-# Half Intensity A 0101
-# Blinking B 0102
-# Half Intensity Blinking C 0103
-# Reverse Video P 0120
-# Reverse Video Half Intensity Q 0121
-# Reverse Video Blinking R 0122
-# Reverse Video Half Intensity
-# Blinking S 0123
-# Underlined ` 0140
-# Underlined Half Intensity a 0141
-# Underlined Blinking b 0142
-# Underlined Half Intensity
-# Blinking c 0143
-# Video suppress D 0104
-vp3a+|viewpoint3a+|adds viewpoint 3a+,
- am, bw,
- cols#80, it#8, lines#24,
- blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
- cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
- ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E),
- kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
- nel=^M^J, rev=\E0P\E), rmso=\E(,
- sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
- sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
-vp60|viewpoint60|addsvp60|adds viewpoint60,
- use=regent40,
+# Alas, there is no cursor upline capability on this display.
#
-# adds viewpoint 90 - from cornell
-# Note: emacs sends ei occasionally to insure the terminal is out of
-# insert mode. This unfortunately puts the viewpoint90 IN insert
-# mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
-# - :ei=:im=: must be present in the termcap translation.)
-# - <xhp> indicates glitch that attributes stick to location
-# - <msgr> means it's safe to move in standout mode
-# - <clear=\EG\Ek>: clears screen and visual attributes without affecting
-# the status line
-# Function key and label capabilities merged in from SCO.
-vp90|viewpoint90|adds viewpoint 90,
- OTbs, bw, msgr, xhp,
- cols#80, lines#24,
- clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
- dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
- ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
- kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
- kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
- kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
- lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
- lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
- sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
-# Note: if return acts weird on a980, check internal switch #2
-# on the top chip on the CONTROL pc board.
-adds980|a980|adds consul 980,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
- cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
- dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
- kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
- kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
+# These entries add some 'sanity stuff' to the clear function. That is, it
+# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping,
+# and turns off the cursor blinking and stuff like that.
+#
+# NOTE: calling 'beep' turns on the backlight (bell)
+# NOTE: calling 'flash' turns it on and back off (visual bell)
+#
+MtxOrb|Generic Matrix Orbital LCD display,
+ bel=\376B\001, clear=\376X\376C\376R\376K\376T,
+ cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
+ flash=\376B\001$<200>\376F, home=\376H,
+MtxOrb204|20x4 Matrix Orbital LCD display,
+ cols#20, lines#4, use=MtxOrb,
+MtxOrb162|16x2 Matrix Orbital LCD display,
+ cols#16, lines#2, use=MtxOrb,
+# The end
-#### C. Itoh Electronics
+######## OLDER TERMINAL TYPES
#
-# As of 1995 these people no longer make terminals (they're still in the
-# printer business). Their terminals were all clones of the DEC VT series.
-# They're located in Orange County, CA.
+# This section is devoted to older commercial terminal brands that are now
+# discontinued, but known to be still in use or represented by emulations.
#
-# CIT 80 - vt-52 emulator, the termcap has been modified to remove
-# the delay times and do an auto tab set rather than the indirect
-# file used in vt100.
-cit80|cit-80|citoh 80,
- OTbs, am,
- cols#80, lines#24,
- clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
- ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
- kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
-# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
-# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
-cit101|citc|C.itoh fast vt100,
- OTbs, am, xenl,
- cols#80, lines#24,
- bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
- cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
- flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
- is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
- smul=\E[4m,
-# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
-# The following termcap entry was created from the Callan cd100 entry. The
-# last two lines (with the capabilities in caps) are used by RM-cobol to allow
-# full selection of combinations of reverse video, underline, and blink.
-# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
-# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
-# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
-cit101e|C. Itoh CIT-101e,
- OTbs, OTpt, am, mir, msgr,
- cols#80, it#8, lines#24,
- acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
- cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
- cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
- ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
- kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
- rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
- smkx=\E=, smso=\E[7m, smul=\E[4m,
-# From: David S. Lawyer, June 1997:
-# The CIT 101-e was made in Japan in 1983-4 and imported by CIE
-# Terminals in Irvine, CA. It was part of CITOH Electronics. In the
-# late 1980's CIT Terminals went out of business.
-# There is no need to use the initialization string is=... (by invoking
-# tset or setterm etc.) provided that the terminal has been manually set
-# up (and the setup saved with ^S) to be compatible with this termcap. To be
-# compatible it should be in ANSI mode (not VT52). A set-up that
-# works is to set all the manually setable stuff to factory defaults
-# by pressing ^D in set-up mode. Then increse the brighness with the
-# up-arrow key since the factory default will likely be dim on an old
-# terminal. Then change any options you want (provided that they are
-# compatible with the termcap). For my terminal I set: Screen
-# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
-# on. I also set up mine for parity (but you may not need it). Then
-# save the setup with ^S.
-# (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
-cit101e-rv|Citoh CIT-101e (sets reverse video),
- am, eo, mir, msgr, xenl, xon,
+#### AT&T (att, tty)
+#
+# This section also includes Teletype-branded VDTs.
+#
+# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
+# Boundless Technologies); for details, see the header comment on the ADDS
+# section.
+#
+# These are AT&T's official terminfo entries. All-caps aliases have been
+# removed.
+#
+att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
+ am, eo, mir, msgr, xon,
cols#80, it#8, lines#24,
- OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
- civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ bel=^G, clear=\E[H\E[J, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
- home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
- is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
- kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
- rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
- rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
- sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
- smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
- u7=\E[6n, u8=\E[?6c, u9=\E[c,
-cit101e-n|CIT-101e w/o am,
- am@,
- cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
- use=cit101e,
-cit101e-132|CIT-101e with 132 cols,
- cols#132,
- kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
-cit101e-n132|CIT-101e with 132 cols w/o am,
- am@,
- cols#132,
- cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
- use=cit101e,
-# CIE Terminals CIT-500 from BRL
-# The following SET-UP modes are assumed for normal operation:
-# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
-# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
-# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
-# Other SET-UP modes may be set for operator convenience or communication
-# requirements.
-# Hardware tabs are assumed to be set every 8 columns; they can be set up
-# by the "reset", "tset", or "tabs" utilities. No delays are specified; use
-# "stty ixon -ixany" to enable DC3/DC1 flow control!
-# (cit500: I added <rmam>/<smam> based on the init string -- esr)
-cit500|CIE Terminals CIT-500,
- OTbs, OTpt, mir, msgr, xon,
- OTkn#10, cols#80, it#8, lines#64, vt#3,
- acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
- clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
- il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
- ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
- kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
- khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
- lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
- lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
- ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
- rmso=\E[m, rmul=\E[m,
- rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
- sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, kbs=^H, kcbt=\E[Z, kclr=\E[J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
+ kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
+ kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
+ kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
+ smso=\E[7m,
+att2350|AT&T 2350 Video Information Terminal 80 column mode,
+ mc0@, mc4@, mc5@, use=att2300,
-# C. Itoh printers begin here
-citoh|ci8510|8510|c.itoh 8510a,
- cols#80, it#8,
- bold=\E!, cub1@,
- is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
- rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
- smul=\EX, use=lpr,
-citoh-pica|citoh in pica,
- is1=\EN, use=citoh,
-citoh-elite|citoh in elite,
- cols#96,
- is1=\EE,
- is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
- use=citoh,
-citoh-comp|citoh in compressed,
- cols#136,
- is1=\EQ,
- is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
- use=citoh,
-# citoh has infinite cols because we don't want lp ever inserting \n\t**.
-citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
- cols#32767,
- is1=\EP, use=citoh,
-citoh-6lpi|citoh in 6 lines per inch mode,
- is3=\EA, use=citoh,
-citoh-8lpi|citoh in 8 lines per inch mode,
- lines#88,
- is3=\EB, use=citoh,
+# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
+# Seems upward compatible with vt100, plus ins/del line/char.
+# On sgr, the protection parameter is ignored.
+# No check is made to make sure that only 3 parameters are output.
+# standout= reverse + half-intensity = 3 | 5.
+# bold= reverse + underline = 2 | 3.
+# note that half-bright blinking doesn't look different from normal blinking.
+# NOTE:you must program the function keys first, label second!
+# (att4410: a BSD entry has been seen with the following capabilities:
+# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
+# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
+att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
+ am, hs, mir, msgr, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyz
+ z{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
+ dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
+ ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, is1=\E[?3l\E)0,
+ is3=\E[1;03q\s\s\sf1\s\s\s\s\s\s\s\s\s\s\s\EOP\E[2;03q\s\s
+ \sf2\s\s\s\s\s\s\s\s\s\s\s\EOQ\E[3;03q\s\s\sf3\s\s\s\s
+ \s\s\s\s\s\s\s\EOR\E[4;03q\s\s\sf4\s\s\s\s\s\s\s\s\s\s
+ \s\EOS\E[5;03q\s\s\sf5\s\s\s\s\s\s\s\s\s\s\s\EOT\E[6;03q
+ \s\s\sf6\s\s\s\s\s\s\s\s\s\s\s\EOU\E[7;03q\s\s\sf7\s\s
+ \s\s\s\s\s\s\s\s\s\EOV\E[8;03q\s\s\sf8\s\s\s\s\s\s\s\s
+ \s\s\s\EOW,
+ kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
+ kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
+ ll=\E[24H, nel=\r\n,
+ pfx=\E[%p1%1d;%p2%l%2.2dq\s\s\sf%p1%1d\s\s\s\s\s\s\s\s\s\s
+ \s%p2%s,
+ pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
+ sc=\E7,
+ sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%p1%{1}%+%dH,
-#### Control Data (cdc)
-#
+att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
+ cols#132, wsl#132,
+ is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
-cdc456|cdc 456 terminal,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
- el=^V, home=^Y, il1=\EL, ind=^J,
+att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
+ OTbs,
+ pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
+ use=att5410v1,
-# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
-cdc721|CDC Viking,
- OTbs, am,
- cols#80, lines#24,
- clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
- cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
- kcuu1=^W, khome=^Y,
-cdc721ll|CDC Vikingll,
- OTbs, am,
- cols#132, lines#24,
- clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
- cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
- kcuu1=^W, khome=^Y,
-# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
-cdc752|CDC 752,
- OTbs, am, bw, xhp,
- cols#80, lines#24,
- bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
- cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
- home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
-# CDC 756
-# The following switch/key settings are assumed for normal operation:
-# 96 chars SCROLL FULL duplex not BLOCK
-# Other switches may be set according to communication requirements.
-# Insert/delete-character cannot be used, as the whole display is affected.
-# "so" & "se" are commented out until jove handles "sg" correctly.
-cdc756|CDC 756,
- OTbs, am, bw,
- OTkn#10, cols#80, lines#24,
- bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
- cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
- dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
- kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
- kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
- kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
- khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
- lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
- rs1=\031\030\002\003\017,
-#
-# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
-#
-# Part of the long initialization string defines the "DOWN" key to the left
-# of the tab key to send an ESC. The real ESC key is positioned way out
-# in right field.
-#
-# The termcap won't work in 132 column mode due to the way it it moves the
-# cursor. Termcap doesn't have the capability (as far as I could tell) to
-# handle the 721 in 132 column mode.
-#
-# (cdc721: changed :ri: to :sr: -- esr)
-cdc721-esc|Control Data 721,
- OTbs, OTpt, am, bw, msgr, xon,
- OTkn#10, cols#80, it#8, lines#30,
- bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
- cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
- dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
- ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
- is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
- kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
- kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
- kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
- ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
- sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
- smso=^^D, smul=^\, tbc=^^^RY,
+att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
+ cols#132, wsl#132,
+ is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
+
+# 5410 in terms of a vt100
+# (v5410: added <rmam>/<smam> based on init string -- esr)
+v5410|att5410 in terms of a vt100,
+ am, mir, msgr, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\n, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
+ dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
+ il1=\E[L, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
+ rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
+ rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+ use=vt100+fnkeys,
-#### Getronics
#
-# Getronics is a Dutch electronics company that at one time was called
-# `Geveke' and made async terminals; but (according to the company itself!)
-# they've lost all their documentation on the command set. The hardware
-# documentation suggests the terminals were actually manufactured by a
-# Taiwanese electronics company named Cal-Comp. There are known
-# to have been at least two models, the 33 and the 50.
+# Teletype Model 5420 -- A souped up 5410, with multiple windows,
+# even! the 5420 has three modes: scroll, window or page mode
+# this terminfo should work in scroll or window mode, but doesn't
+# take advantage of any of the differences between them.
#
+# Has memory below (2 lines!)
+# 3 pages of memory (plus some spare)
+# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
+# <hpa>, <hts> would work for these, but these work in both scroll and window
+# mode... Unset insert character so insert mode works
+# <is1> sets 80 column mode,
+# <is2> escape sequence:
+# 1) turn off all fonts
+# 2) function keys off, keyboard lock off, control display off,
+# insert mode off, erasure mode off,
+# 3) full duplex, monitor mode off, send graphics off, nl on lf off
+# 4) reset origin mode
+# 5) set line wraparound
+# 6) exit erasure mode, positional attribute mode, and erasure extent mode
+# 7) clear margins
+# 8) program ENTER to transmit ^J,
+# We use \212 to program the ^J because a bare ^J will get translated by
+# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
+# 1 2 3 4 5 6 7 8
+# <is3> set screen color to black,
+# No representation in terminfo for the delete word key: kdw1=\Ed
+# Key capabilities assume the power-up send sequence...
+# This <rmcup> is not strictly necessary, but it helps maximize
+# memory usefulness: <rmcup=\Ez>,
+# Alternate sgr0: <sgr0=\E[m\EW^O>,
+# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
+# smkx programs the SYS PF keys to send a set sequence.
+# It also sets up labels f1, f2, ..., f8, and sends edit keys.
+# This string causes them to send the strings <kf1>-<kf8>
+# when pressed in SYS PF mode.
+# (att4415: I added <rmam>/<smam> based on the init string -- esr)
+att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
+ OTbs, db, mir, xon,
+ lh#2, lm#78, lw#8, nlab#8, wsl#55,
+ cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
+ cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
+ cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
+ dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
+ flash=\E[?5h$<200>\E[?5l, home=\E[x,
+ hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
+ il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
+ is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
+ \E[4i\Ex\E[21;1j\212,
+ is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
+ kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
+ kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+ kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
+ kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
+ lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
+ mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
+ rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
+ sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
+ tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
+ use=att4410,
-# The 50 seems to be a top end vt220 clone, with the addition of a higher
-# screen resolution, a larger screen, at least 1 page of memory above and
-# below the screen, apparently pages of memory right and left of the screen
-# which can be panned, and about 75 function keys (15 function keys x normal,
-# shift, control, func A, func B). It also has more setup possibilities than
-# the vt220. The monitor case is dated November 1978 and the keyboard case is
-# May 1982.
-#
-# The vt100 emulation works as is. The entry below describes the rather
-# non-conformant (but more featureful) ANSI mode.
-#
-# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
-visa50|geveke visa 50 terminal in ansi 80 character mode,
- bw, mir, msgr,
- cols#80, lines#25,
- acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
- blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
- hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
- is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
- ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
- kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
- kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
- kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
- kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
- lf3=A insert line, lf4=A delete line, lf5=A clear,
- lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
- lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
- rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
- rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
- smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%i%p1%dd,
+att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
+ cols#132, lm#54, wsl#97,
+ is1=\E[?3h$<100>, use=att4415,
-#### Human Designed Systems (Concept)
+att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
+ flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
+
+att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
+ cols#132, lm#54, wsl#97,
+ flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
+ use=att4415,
+
+# Note that this mode permits programming USER PF KEYS and labels
+# However, when you program user pf labels you have to reselect
+# user pf keys to make them appear!
+att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
+ pfx=\E[%p1%d;%p2%l%02d;0;1q\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
+ \s%p2%s,
+ pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
+
+att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415,
+
+att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415-rv,
+
+att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415-w,
+
+att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
+ kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
+ use=att4415-w-rv,
+
+att5420_2|AT&T 5420 model 2 80 cols,
+ am, db, hs, mir, msgr, xon,
+ cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
+ cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
+ cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
+ el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
+ home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ indn=\E[%p1%dE, invis=\E[8m,
+ is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j
+ \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
+ \E[29;0j\E[1;24r,
+ kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
+ kel=\E[2K, kend=\Ez, kent=\n, kf1=\EOc, kf2=\EOd, kf3=\EOe,
+ kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
+ kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
+ kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
+ lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
+ mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=\r\n,
+ pfx=\E[%p1%d;%p2%l%02dq\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s\s%p2
+ %s\E~,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
+ rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
+ sc=\E7,
+ sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;%?%p8%t\EV%;,
+ sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
+att5420_2-w|AT&T 5420 model 2 in 132 column mode,
+ cols#132,
+ is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j
+ \E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j
+ \E[29;0j\E[1;24r,
+ use=att5420_2,
+
+att4418|att5418|AT&T 5418 80 cols,
+ am, xon,
+ cols#80, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
+ ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\n,
+ is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
+ kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
+ kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
+ kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
+ kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
+ kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
+ rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
+ sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
+att4418-w|att5418-w|AT&T 5418 132 cols,
+ cols#132,
+ is1=\E[?3h, use=att5418,
+
+att4420|tty4420|teletype 4420,
+ OTbs, da, db, eo, msgr, ul, xon,
+ cols#80, lines#24, lm#72,
+ bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
+ dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
+ kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
+ kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
+ lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
+ rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
+
+# The following is a terminfo entry for the Teletype 4424
+# asynchronous keyboard-display terminal. It supports
+# the vi editor. The terminal must be set up as follows,
#
-# Human Designed Systems
-# 400 Fehley Drive
-# King of Prussia, PA 19406
-# Vox: (610)-277-8300
-# Fax: (610)-275-5739
-# Net: support@hds.com
+# HIGHLIGHT DEFINITION 3-TONE
+# DISPLAY FUNCTION GROUP III
#
-# John Martin <john@hds.com> is their termcap expert. They're mostly out of
-# the character-terminal business now (1995) and making X terminals. In
-# particular, the whole `Concept' line described here was discontinued long
-# ago.
+# The second entry below provides limited (a la adm3a)
+# operation under GROUP II.
#
-
-# From: <vax135!hpk> Sat Jun 27 07:41:20 1981
-# Extensive changes to c108 by arpavax:eric Feb 1982
-# Some unknown person at SCO then translated it to terminfo.
+# This must be used with DISPLAY FUNCTION GROUP I or III
+# and HIGHLIGHT DEFINITION 3-TONE
+# The terminal has either bold or blink, depending on options
#
-# There seem to be a number of different versions of the C108 PROMS
-# (with bug fixes in its Z-80 program).
+# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
+att4424|tty4424|teletype 4424,
+ OTbs, am, xon,
+ cols#80, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
+ dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
+ ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=\n, is2=\E[20l\E[?7h,
+ kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+ khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
+ rmul=\EZ,
+ sgr=\EX\E~\EZ\E4\E(B%?%p1%p3%|%t\E}%;%?%p2%t\E\\%;%?%p4%p6%|
+ %t\E3%;%?%p5%t\EW%;%?%p9%t\E(0%;,
+ sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
+ tbc=\EF,
+
+att4424-1|tty4424-1|teletype 4424 in display function group I,
+ kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
+ use=att4424,
+
+# This entry is not one of AT&T's official ones, it was translated from the
+# 4.4BSD termcap file. The highlight strings are different from att4424.
+# I have no idea why this is -- older firmware version, maybe?
+# The following two lines are the comment originally attached to the entry:
+# This entry appears to avoid the top line - I have no idea why.
+# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
+att4424m|tty4424m|teletype 4424M,
+ am, da, db, mir,
+ cols#80, it#8, lines#23,
+ bel=^G, clear=\E[2;H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
+ dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=\n, ip=$<2/>,
+ is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, khome=\E[H, nel=\r\n, ri=\ET, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+
+# The Teletype 5425 is really version 2 of the Teletype 5420. It
+# is quite similar, except for some minor differences. No page
+# mode, for example, so all of the <cup> sequences used above have
+# to change back to what's being used for the 5410. Many of the
+# option settings have changed their numbering as well.
#
-# The first one that we had would lock out the keyboard of you
-# sent lots of short lines (like /usr/dict/words) at 9600 baud.
-# Try that on your C108 and see if it sends a ^S when you type it.
-# If so, you have an old version of the PROMs.
+# This has been tested on a preliminary model.
#
-# You should configure the C108 to send ^S/^Q before running this.
-# It is much faster (at 9600 baud) than the c100 because the delays
-# are not fixed.
-# new status line display entries for c108-8p:
-# <is3> - init str #3 - setup term for status display -
-# set programmer mode, select window 2, define window at last
-# line of memory, set bkgnd stat mesg there, select window 0.
-#
-# <tsl> - to status line - select window 2, home cursor, erase to
-# end-of-window, 1/2 bright on, goto(line#0, col#?)
-#
-# <fsl> - from status line - 1/2 bright off, select window 0
-#
-# <dsl> - disable status display - set bkgnd status mesg with
-# illegal window #
-#
-# There are probably more function keys that should be added but
-# I don't know what they are.
-#
-# No delays needed on c108 because of ^S/^Q handshaking
-#
-c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
- is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
- rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
-c108-4p|concept108-4p|concept 108 w/4 pages,
- OTbs, eslok, hs, xon,
- pb@,
- acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
- cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
- cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
- ind=^J, is1=\EK\E!\E F,
- is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
- rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
- smcup=\EU\Ev 8p\Ep\r\E\025,
- tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
-c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
- rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
- use=c108-rv-4p,
-c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
- flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
- use=c108-4p,
-c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
- cols#132,
- is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
- smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
+# (att5425: added <rmam>/<smam> based on the init string -- esr)
+att5425|tty5425|att4425|AT&T 4425/5425,
+ am, da, db, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ clear=\E[H\E[J, cnorm=\E[12;0j, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
+ el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
+ flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
+ hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, indn=\E[%p1%dE,
+ invis=\E[8m, is1=\E<\E[?3l$<100>,
+ is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h
+ \E[4i\Ex\E[25;1j\212,
+ is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
+ kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
+ kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
+ kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
+ nel=\r\n,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
+ rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
+ rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
+ rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
+ sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
+ %|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
+ vpa=\E[%p1%{1}%+%dd,
-# Concept 100:
-# These have only window relative cursor addressing, not screen
-# relative. To get it to work right here, smcup/rmcup (which
-# were invented for the concept) lock you into a one page
-# window for screen style programs.
-#
-# To get out of the one page window, we use a clever trick:
-# we set the window size to zero ("\Ev " in rmcup) which the
-# terminal recognizes as an error and resets the window to all
-# of memory.
-#
-# This trick works on c100 but does not on c108, sigh.
-#
-# Some tty drivers use cr3 for concept, others use nl3, hence
-# the delays on cr and ind below. This padding is only needed at
-# 9600 baud and up. One or the other is commented out depending on
-# local conventions.
-#
-# 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
-# less than 6 but more than 2 will work.
-#
-# Note: can't use function keys f7-f10 because they are
-# indistinguishable from arrow keys (!), also, del char and
-# clear eol use xon/xoff so they probably won't work very well.
-#
-# Also note that we don't define insrt/del char/delline/eop/send
-# because they don't transmit unless we reset them - I figured
-# it was a bad idea to clobber their definitions.
-#
-# The <mc5> sequence changes the escape character to ^^ so that
-# escapes will be passed through to the printer. Only trouble
-# is that ^^ won't be - ^^ was chosen to be unlikely.
-# Unfortunately, if you're sending raster bits through to be
-# plotted, any character you choose will be likely, so we lose.
-#
-# \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
-# cannot be # in is2 because it will hang a c100 with no printer
-# if sent twice.
-c100|concept100|concept|c104|c100-4p|hds concept 100,
- OTbs, am, eo, mir, ul, xenl,
- cols#80, lines#24, pb#9600, vt#8,
- bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
- cub1=^H, cud1=^J, cuf1=\E=,
- cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
- dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
- ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
- ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
- is1=\EK,
- is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
- is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
- kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
- kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
- kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
- khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
- kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
- mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
- rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
- rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
- rmso=\Ed, rmul=\Eg, sgr0=\EN@,
- smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
- smso=\ED, smul=\EG,
-c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
- cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
- smso=\EE, use=c100,
-oc100|oconcept|c100-1p|old 1 page concept 100,
- in,
- is3@, use=c100,
+att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
+ smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
-# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
-# Lots of notes, originally inline, but ncurses doesn't grok that.
-#
-# am: not available in power on mode, but turned on with \E[=107;207h in
-# is2=. Also, \E=124l in is2= could have been used to prevent needing
-# to specify xenl:, but that would have rendered the last space on the
-# last line useless.
-# bw: Not available in power on mode, but turned on with \E[=107;207h in
-# is2=.
-# clear: Could be done with \E[2J alone, except that vi (and probably most
-# other programs) assume that this also homes the cursor.
-# dsl: Go to window 2, go to the beginning of the line, use a line feed to
-# scroll the window, and go back to window 1.
-# is2: the string may cause a warning to be issued by tic that it
-# found a very long line and that it suspects that a comma is missing
-# somewhere. This warning can be ignored (unless it comes up more than
-# once). The initialization string contains the following commands:
+att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
+ cols#132, lm#54, wsl#97,
+ is1=\E[?3h$<100>, use=tty5425,
+
+# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
+# I also added <rmam>/<smam> -- esr)
+att4426|tty4426|teletype 4426S,
+ am, da, db, xon,
+ cols#80, lines#24, lm#48,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
+ cr=\r, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
+ hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
+ il=\E[%p1%dL, il1=\EL, ind=\n, is1=\Ec\E[?7h,
+ is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, kclr=\E[2J, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\EOP, kf2=\EOQ,
+ kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
+ khome=\E[H, kll=\E[24;1H, ll=\E[24H, nel=\r\n, rc=\E8,
+ rev=\E[7m, ri=\ET, rmacs=\E(B, rmam=\E[?7l, rmso=\E[m,
+ rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B,
+ smacs=\E(0, smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%p1%dd, use=ecma+index,
+
+# Terminfo entry for the AT&T 510 A Personal Terminal
+# Function keys 9 - 16 are available only after the
+# screen labeled (soft keys/action blocks) are labeled. Function key
+# 9 corresponds to the leftmost touch target on the screen,
+# function key 16 corresponds to the rightmost.
#
-# [Setup mode items changed from factory defaults:]
-# \E)0 set alternate character set to
-# graphics
-# ^O set character set to default
-# [In case it wasn't]
-# \E[m turn off all attributes
-# [In case they weren't off]
-# \E[=107; cursor wrap and
-# 207h character wrap on
-# \E[90;3u set Fkey definitions to "transmit"
-# defaults
-# \E[92;3u set cursor key definitions to
-# "transmit" defaults
-# \E[43;1u set shift F13 to transmit...
-# \177\E$P\177
-# \E[44;1u set shift F14 to transmit...
-# \177\E$Q\177
-# \E[45;1u set shift F15 to transmit...
-# \177\E$R\177
-# \E[46;1u set shift F16 to transmit...
-# \177\E$S\177
-# \E[200;1u set shift up to transmit...
-# \177\E$A\177
-# \E[201;1u set shift down to transmit...
-# \177\E$B\177
-# \E[202;1u set shift right to transmit...
-# \177\E$C\177
-# \E[203;1u set shift left to transmit...
-# \177\E$D\177
-# \E[204;1u set shift home to transmit...
-# \177\E$H\177
-# \E[212;1u set backtab to transmit...
-# \177\E$I\177
-# \E[213;1u set shift backspace to transmit...
-# \177\E$^H\177
-# \E[214;1u set shift del to transmit...
-# "\E$\177"
-# [Necessary items not mentioned in setup mode:]
-# \E[2!w move to window 2
-# \E[25;25w define window as line 25 of memory
-# \E[!w move to window 1
-# \E[2*w show current line of window 2 as
-# status line
-# \E[2+x set meta key to use high bit
-# \E[;3+} move underline to bottom of character
+# This entry is based on one done by Ernie Rice at Summit, NJ and
+# changed by Anne Gallup, Skokie, IL, ttrdc!anne
+att510a|bct510a|AT&T 510A Personal Terminal,
+ am, mir, msgr, xenl, xon,
+ cols#80, lh#2, lines#24, lw#7, nlab#8,
+ acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
+ dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
+ el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
+ hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n, is1=\E(B\E)1\E[2l,
+ is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
+ kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
+ kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
+ kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
+ mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
+ pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
+ sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
+ %|%t;7%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g,
+
+# Terminfo entry for the AT&T 510 D Personal Terminal
+# Function keys 9 through 16 are accessed by bringing up the
+# system blocks.
+# Function key 9 corresponds to the leftmost touch target on the screen,
+# function key 16 corresponds to the rightmost.
#
-# All Fkeys are set to their default transmit definitions with \E[90;3u
-# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
-# setting MUST be redefined or deactivated, because the default is
-# contained in almost all of this terminal's Fkey strings! If for some
-# reason "quit" cannot be altered, the Fkeys can, but it would be
-# necessary to change ^| to ^] in all of these definitions, and add
-# \E[2;029!t to is2.
-# lines: is set to 24 because this terminal refuses to treat the 25th
-# line normally.
-# ll: Not available in power on mode, but turned on with \E[=107;207h in
-# is2=.
-# lm: Pointless, given that this definition locks a single screen of
-# memory into view, but what the hey...
-# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
-# other attributes alone), but some programs expect this to turn off
-# everything.
-# rmul: Could use \E[4!{ to turn off only underline (leaving any other
-# attributes alone), but some programs expect this to turn off
-# everything.
-# sgr: Attributes are set on this terminal with the string \E[ followed by
-# a list of attribute code numbers (in decimal, separated by
-# semicolons), followed by the character m. The attribute code
-# numbers are:
-# 1 for bold;
-# 2 for dim (which is ignored in power on mode);
-# 4 for underline;
-# 5 for blinking;
-# 7 for inverse;
-# 8 for not displayable; and
-# =99 for protected (except that there are strange side
-# effects to protected characters which make them inadvisable).
-# The mapping of terminfo parameters to attributes is as follows:
-# %p1 (standout) = bold and inverse together;
-# %p2 (underline) = underline;
-# %p3 (reverse) = inverse;
-# %p4 (blink) = blinking;
-# %p5 (dim) is ignored;
-# %p6 (bold) = bold;
-# %p7 (invisible) = not displayable;
-# %p8 (protected) is ignored; and
-# %p9 (alt char set) = alt char set.
-# The code to do this is:
-# \E[0 OUTPUT \E[0
-# %?%p1%p6%O IF (standout; bold) OR
-# %t;1 THEN OUTPUT ;1
-# %; ENDIF
-# %?%p2 IF underline
-# %t;4 THEN OUTPUT ;4
-# %; ENDIF
-# %?%p4 IF blink
-# %t;5 THEN OUTPUT ;5
-# %; ENDIF
-# %?%p1%p3%O IF (standout; reverse) OR
-# %t;7 THEN OUTPUT ;7
-# %; ENDIF
-# %?%p7 IF invisible
-# %t;8 THEN OUTPUT ;8
-# %; ENDIF
-# m OUTPUT m
-# %?%p9 IF altcharset
-# %t^N THEN OUTPUT ^N
-# %e^O ELSE OUTPUT ^O
-# %; ENDIF
-# sgr0: Everything is turned off (including alternate character set), since
-# there is no way of knowing what it is that the program wants turned
-# off.
-# smul: The "underline" attribute is reconfigurable to an overline or
-# strikethru, or (as done with \E[;3+} in is2=), to a line at the true
-# bottom of the character cell. This was done to allow for more readable
-# underlined characters, and to be able to distinguish between an
-# underlined space, an underscore, and an underlined underscore.
-# xenl: Terminal can be configured to not need this, but this "glitch"
-# behavior is actually preferable with autowrap terminals.
+# There are problems with soft key labeling. These are due to
+# strangenesses in the native terminal that are impossible to
+# describe in a terminfo.
+att510d|bct510d|AT&T 510D Personal Terminal,
+ am, da, db, mir, msgr, xenl, xon,
+ cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
+ acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ clear=\E[H\E[J, cnorm=\E[11;3|, cr=\r, cub=\E[%p1%dD,
+ cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
+ el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
+ hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
+ is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, kLFT=\E[u,
+ kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, kf11=\EOe,
+ kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, kf16=\EOj,
+ kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, kf7=\ENh,
+ kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, mc0=\E[0i,
+ mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
+ pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
+ rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, rmln=\E<, rmso=\E[m,
+ rmul=\E[m, rmxon=\E[29;1|, rs2=\E[5;0|, sc=\E7,
+ sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6
+ %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
+ smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
+ smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
+ use=ansi+rep, use=ecma+index,
+
+# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
+att500|att513|AT&T 513 using page mode,
+ am, chts, mir, msgr, xenl, xon,
+ cols#80, lh#2, lines#24, lw#8, nlab#8,
+ acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
+ clear=\E[H\E[J, cnorm=\E[11;0|, cr=\r,
+ csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
+ hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ indn=\E[%p1%dE, invis=\E[8m,
+ is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
+ kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+ kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+ kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
+ kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
+ kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
+ kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
+ kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
+ kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
+ kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
+ khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
+ kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
+ kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
+ kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
+ ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
+ mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
+ nel=\EE,
+ pfkey=\E[%p1%d;%p2%l%d;3;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
+ \s%p2%s,
+ pfloc=\E[%p1%d;%p2%l%d;2;0p\s\s\sF%p1%d\s\s\s\s\s\s\s\s\s\s
+ \s%p2%s,
+ pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
+ pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
+ rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
+ rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
+ rmul=\E[m,
+ rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|
+ \E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
+ rs2=\E[5;0|, sc=\E7,
+ sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h,
+ smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
+
+# 01-07-88
+# printer must be set to EMUL ANSI to accept ESC codes
+# <cuu1> stops at top margin
+# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
+# and alt font ascii,wrap on,tabs cleared
+# <is2> disables newline on LF,Emphasized off
+# The <u0> capability sets form length
+att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
+ xhpa, xvpa,
+ bufsz#0x2000, cols#132, cps#120, it#8, lines#66, orc#10,
+ orhi#100, orl#12, orvi#72,
+ cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w
+ %e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O
+ %t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t
+ \E[8w%;,
+ cr=\r,
+ csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfi
+ nnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1
+ %{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench
+ %e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1
+ %{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurit
+ y%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmos
+ aic%;,
+ cud=\E[%p1%de, cud1=\n, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
+ ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
+ lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e
+ %p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
+ rshm=\E[m,
+ scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1
+ %{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}
+ %=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t
+ \E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t
+ \E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t
+ \E(}%;,
+ smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
+ smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
+ u0=\E[%p1%dt, vpa=\E[%p1%dd,
+
+# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
+# The following SET-UP modes are assumed for normal operation:
+# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements. This termcap description is for the Resident Terminal Mode.
+# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# The BRL entry also said: UNSAFE :ll=\E[70H:
+att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
+ am, xon,
+ cols#88, it#8, lines#70, vt#3,
+ bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=\n, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=\r\n,
+ rc=\E8, ri=\E[T, rs1=\Ec, sc=\E7, use=ecma+index,
+
+# 5620 terminfo (2.0 or later ROMS with char attributes)
+# The following SET-UP modes are assumed for normal operation:
+# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements. This termcap description is for Resident Terminal Mode. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# assumptions: <ind> (scroll forward one line) is only done at screen bottom
+# Be aware that older versions of the dmd have a firmware bug that affects
+# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
+# <msgr> is from an otherwise inferior BRL for this terminal. That entry
+# also has <ll>=\E[70H commented out and marked unsafe.
+# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
+att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
+ OTbs, am, msgr, npc, xon,
+ cols#88, it#8, lines#70,
+ bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=\r, cub1=^H,
+ cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, kbs=^H,
+ kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ khome=\E[H, kll=\E[70;1H, nel=\n,
+ pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
+ rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, sgr0=\E[0m,
+ smso=\E[7m, smul=\E[4m, use=ecma+index,
+att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
+ lines#24, use=att5620,
+att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
+ lines#34, use=att5620,
+# 5620 layer running the "S" system's downloaded graphics handler:
+att5620-s|tty5620-s|layer|vitty|5620 S layer,
+ OTbs, OTpt, am,
+ cols#80, it#8, lines#72,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
+ cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
+ el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=\n, kbs=^H, kclr=\E[2J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
+ kll=\E[70;1H,
+
+# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
+#
+# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
+# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
+att605|AT&T 605 80 column 102key keyboard,
+ am, eo, xon,
+ cols#80, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
+ il1=\E[L, ind=\n, invis=\E[8m,
+ is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
+ kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
+ kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
+ kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
+ kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
+ kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
+ kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
+ kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
+ kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
+ kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
+ kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
+ kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
+ mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
+ rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
+ smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%i%p1%dx,
+att605-pc|ATT 605 in pc term mode,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
+ \263,
+ cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
+ dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
+ kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
+ kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
+ rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
+ xoffc=g, xonc=e, use=att605,
+att605-w|AT&T 605-w 132 column 102 key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
+# (att610: I added <rmam>/<smam> based on the init string. I also
+# added <indn> and <rin> because the BSD file says the att615s have them,
+# and the 615 is like a 610 with a big keyboard, and most of their other
+# smart terminals support the same sequence -- esr)
+att610|AT&T 610; 80 column; 98key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
+ nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[2p,
+ rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
+ use=ecma+index, use=att610+cvis0,
+att610-w|AT&T 610; 132 column; 98key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att610,
+
+att610-103k|AT&T 610; 80 column; 103key keyboard,
+ kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+ kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+ kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
+ kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
+ kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
+ kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
+ kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
+ kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
+ khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
+ knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
+ kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
+ krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
+ kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
+att610-103k-w|AT&T 610; 132 column; 103key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att610-103k,
+att615|AT&T 615; 80 column; 98key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
+ kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
+ kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
+ kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
+ kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
+att615-w|AT&T 615; 132 column; 98key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
+ kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
+ kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
+ kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
+ kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
+att615-103k|AT&T 615; 80 column; 103key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
+att615-103k-w|AT&T 615; 132 column; 103key keyboard,
+ kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
+# (att620: I added <rmam>/<smam> based on the init string and
+# <rin>/<indn> from a BSD termcap -- esr)
+att620|AT&T 620; 80 column; 98key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
+ kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
+ kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
+ kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
+ kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
+ kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
+ kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
+ kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+ kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
+ mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=\E(B\017, rmam=\E[?7l, rmir=\E[4l,
+ rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
+ sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
+ smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
+ tsl=\E7\E[25;%i%p1%dx, use=ecma+index,
+ use=att610+cvis0,
+att620-w|AT&T 620; 132 column; 98key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att620,
+att620-103k|AT&T 620; 80 column; 103key keyboard,
+ kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
+ kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
+ kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
+ kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
+ kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
+ kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
+ kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\r,
+ kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
+ kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
+ kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
+ kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
+ kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
+ kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
+ kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
+ kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
+ ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
+
+att620-103k-w|AT&T 620; 132 column; 103key keyboard,
+ cols#132, wsl#132,
+ is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
+ use=att620-103k,
+
+# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
+# The following SETUP modes are assumed for normal operation:
+# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
+# Font_Size=Large Non-Layers_Window_Cols=80
+# Non-Layers_Window_Rows=60
+# Other SETUP modes may be set for operator convenience or communication
+# requirements. Some capabilities assume a printer attached to the Aux EIA
+# port. This termcap description is for the Fixed Non-Layers Window. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
+att630|AT&T 630 windowing terminal,
+ OTbs, am, da, db, mir, msgr, npc, xon,
+ cols#80, it#8, lines#60, lm#0,
+ bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=\r,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[m, kbs=^H, kcbt=\E[Z,
+ kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[P, kdl1=\E[M, kent=\r, kf10=\ENp, kf11=\ENq,
+ kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv,
+ kf17=\ENw, kf18=\ENx, kf19=\ENy, kf20=\ENz, kf21=\EN{,
+ kf22=\EN|, kf23=\EN}, kf24=\EN~, kf9=\ENo, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, mc4=\E[?4i, mc5=\E[?5i, nel=\r\n,
+ pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\EM,
+ rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, sc=\E7,
+ sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7
+ %;m,
+ sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ use=ecma+index,
+att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
+ lines#24, use=att630,
+
+# This is the att700 entry for 700 native emulation of the AT&T 700
+# terminal. Comments are relative to changes from the 605V2 entry and
+# att730 on which the entry is based. Comments show the terminfo
+# capability name, termcap name, and description.
+#
+# Here is what's going onm in the init string:
+# ESC [ 50;4| set 700 native mode (really is 605)
+# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
+# ESC [ 53;0| set GenFlow to Xon/Xoff
+# ESC [ 8 ;0| set CR on NL
+# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
+# ESC [ ? 4 l jump scroll
+# ESC [ ? 5 l/h video: normal (l); reverse (h)
+# ESC [ ?13 l Labels on
+# ESC [ ?15 l parity check = no
+# ESC [ 13 l monitor mode off
+# ESC [ 20 l LF on NL (not CRLF on NL)
+# ESC [ ? 7 h autowrap on
+# ESC [ 12 h local echo off
+# ESC ( B GO = ASCII
+# ESC ) 0 G1 = Special Char & Line Drawing
+# ESC [ ? 31 l Set 7 bit controls
#
-# Parameters kf31= thru kf53= actually contain the strings sent by the shifted
-# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
-# string modifies the 'O' in kf43 to kf46 to a '$'.
+# Note: Most terminals, especially the 600 family use Reverse Video for
+# standout mode. DEC also uses reverse video. The VT100 uses bold in addition
+# Assume we should stay with reverse video for 70.. However, the 605V2 exits
+# standout mode with \E[m (all normal attributes). The 730 entry simply
+# exits reverse video which would leave other current attributes intact. It
+# was assumed the 730 entry to be more correct so rmso has changed. The
+# 605V2 has no sequences to turn individual attributes off, thus its setting
+# and the rmso/smso settings from the 730.
#
-# kcbt was originally ^I but redefined in is2=.
-# kHOM was \E[H originally but redefined in is2=, as were a number of
-# other keys.
-# kDC was originally \177 but redefined in is2=.
+# Note: For the same reason as above in rmso I changed exit under-score mode
+# to specifically turn off underscore, rather than return to all normal
+# attributes
#
-# kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
-# tsl: Go to window 2, then do an hpa=.
+# Note: The following pkey_xmit is taken from the 605V2 which contained the
+# capability as pfxl. It was changed here to pfx since pfxl
+# will only compile successfully with Unix 4.0 tic. Also note that pfx only
+# allows strings to be parameters and label values must be programmed as
+# constant strings. Supposedly the pfxl of Version 4.0 allows both labels
+# and strings to be parameters. The 605V2 pfx entry should be examined later
+# in this regard. For reference the 730 pfxl entry is shown here for comparison
+# 730 pfx entry:
+# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
+# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
#
-#------- flash=\E[8;3!}^G\E[3;3!}
-#------- flash=\E[?5h$<100>\E[?5l
-# There are two ways to flash the screen, both of which have their drawbacks.
-# The first is to set the bell mode to video, transmit a bell character, and
-# set the bell mode back - but to what? There is no way of knowing what the
-# user's old bell setting was before we messed with it. Worse, the command to
-# set the bell mode also sets the key click volume, and there is no way to say
-# "leave that alone", or to know what it's set to, either.
-# The second way to do a flash is to set the screen to inverse video, pad for a
-# tenth of a second, and set it back - but like before, there's no way to know
-# that the screen wasn't ALREADY in inverse video, or that the user may prefer
-# it that way. The point is moot anyway, since vi (and probably other
-# programs) assume that by defining flash=, you want the computer to use it
-# INSTEAD of bel=, rather than as a secondary type of signal.
+# (for 4.0 tic)
+# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
#
-#------- cvvis=\E[+{
-# The is the power on setting, which is also as visible as the cursor
-# gets.
-#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
-# Windowing is possible, but not defined here because it is also used to
-# emulate status line functions. Allowing a program to set a window could
-# clobber the status line or render it unusable. There is additional memory,
-# but screen scroll functions are destructive and do not make use of it.
+# (for <4.0 tic)
+# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
#
-#------- dim= Not available in power on mode.
-# You have a choice of defining low intensity characters as "half bright" and
-# high intensity as "normal", or defining low as "normal" and high as "bold".
-# No matter which you choose, only one of either "half bright" or "bold" is
-# available at any time, so taking the time to override the default is
-# pointless.
+# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
#
-#------- prot=\E[=0;99m
-# Not defined, because it appears to have some strange side effects.
-#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
-#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
-#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
-# Available, but making them available to programs is inadvisable.
-# The code to do this is:
-# %?%p1%{24}%< IF ((key; 24) <;
-# %p1%{30}%> ((key; 30) >;
-# %p1%{54}%< (key; 54) <
-# %A ) AND
-# %O ) OR
-# [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
-# %t\E[ THEN OUTPUT \E[
-# %p1%d OUTPUT (key) as decimal
-# [next line applies to pfx only]
-# ;1 OUTPUT ;1
-# u OUTPUT u
-# \177 OUTPUT \177
-# %p2%s OUTPUT (string) as string
-# \177 OUTPUT \177
-# [DEL chosen as delimiter, but could be any character]
-# [implied: ELSE do nothing]
-# %; ENDIF
+# Port1 Interface
+#
+# modular 10 pin Connector
+# Left side Right side
+# Pin 1 2 3 4 5 6 7 8 9 10
+#
+# Key (notch) at bottom
+#
+# Pin 1 DSR
+# 3 DCD
+# 4 DTR
+# 5 Sig Ground
+# 6 RD
+# 7 SD
+# 8 CTS
+# 9 RTS
+# 10 Frame Ground
+#
+# The manual is 189 pages and is loaded with details about the escape codes,
+# etc..... Available from AT&T CIC 800-432-6600...
+# ask for Document number 999-300-660..
+#
+att700|AT&T 700 24x80 column display w/102key keyboard,
+ am, eslok, hs, mir, msgr, xenl, xon,
+ cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
+ fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
+ is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h
+ \E(B\E)0\E[?31l\E[0m\017,
+ is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
+ kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
+ kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
+ kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
+ kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
+ kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
+ kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
+ kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
+ kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
+ kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
+ mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t\s\s\sF%p1%1d\s\s\s\s\s
+ \s\s\s\s\s\s%;%p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[27m,
+ rmul=\E[24m, rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|,
+ sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
+ smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
+ tsl=\E7\E[99;%i%p1%dx, use=ansi+rep, use=att610+cvis0,
+
+# This entry was modified 3/13/90 by JWE.
+# fixes include additions of <enacs>, correcting <rep>, and modification
+# of <kHOM>. (See comments below)
+# att730 has status line of 80 chars
+# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
+# the <kf25> and up keys are used for shifted system Fkeys
+# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
+# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
+# and 122 key keyboards, the 730's translation is \E[2J. For consistency
+# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
+# 102, 102+1, or 122 key keyboards
+# kHOM=\E[2J,
+# (att730: I added <rmam>/<smam> based on the init string -- esr)
+att730|AT&T 730 windowing terminal,
+ am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
+ cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
+ home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
+ ind=\ED, invis=\E[8m,
+ is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
+ is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
+ kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
+ kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
+ kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
+ kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
+ kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
+ kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
+ kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
+ kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
+ kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
+ kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
+ kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
+ mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
+ pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}
+ %<%tq\s\s\sSYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
+ pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
+ pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h,
+ rmso=\E[27m, rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l,
+ sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1
+ %|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
+ swidm=\E#6, tsl=\E7\E[;%i%p1%dx, use=ansi+rep,
+ use=att610+cvis0,
+att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
+ lines#41, use=att730,
+att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
+ lines#24, use=att730,
+att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
+ flash=\E[?5l$<200>\E[?5h,
+ is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
+att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
+ lines#41, use=att730r,
+att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
+ lines#24, use=att730r,
+
+# The following represents the screen layout along with the associated
+# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
+# not appear on the screen but are shown to reference the bezel buttons.
+# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
+# position relative to the screen.
+#
+#
+#
+# +----------------------------------------------------------------+
+# | |
+# XXXX | kf0 kf24 | XXXX
+# | |
+# | |
+# XXXX | kf1 kf23 | XXXX
+# | |
+# | |
+# XXXX | kf2 kf22 | XXXX
+# | |
+# | |
+# XXXX | kf3 kf21 | XXXX
+# | |
+# | |
+# XXXX | kf4 kf20 | XXXX
+# | |
+# | |
+# XXXX | kf5 kf19 | XXXX
+# | |
+# | |
+# XXXX | kf6 kf18 | XXXX
+# | |
+# | |
+# XXXX | | XXXX
+# | |
+# | |
+# +----------------------------------------------------------------+
+#
+# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
+#
+# Note: XXXX represents the screen buttons
+# CMD REDRAW
+#
+# MAIL
+#
+# version 1 note:
+# The character string sent by key 'kf26' may be user programmable
+# to send either \E[16s, or \E[26s.
+# The character string sent by key 'krfr' may be user programmable
+# to send either \E[17s, or \E[27s.
+#
+# Depression of the "CMD" key sends \E! (kcmd)
+# Depression of the "MAIL" key sends \E[26s (kf26)
+# "REDRAW" same as "REFRESH" (krfr)
+#
+# "kf" functions adds carriage return to output string if terminal is in
+# 'new line' mode.
+#
+# The following are functions not covered in the table above:
+#
+# Set keyboard character (SKC): \EPn1;Pn2w
+# Pn1= 0 Back Space key
+# Pn1= 1 Break key
+# Pn2= Program char (hex)
#
-#------- rs2=
-# Not defined since anything it might do could be done faster and easier with
-# either Meta-Shift-Reset or the main power switch.
+# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
+# Pn1= Window number (1-39)
+# Pn2-Pn5= Y;X;Y;X coordinates
#
-#------- smkx=\E[1!z
-#------- rmkx=\E[!z
-# These sequences apply to the cursor and setup keys only, not to the
-# numeric keypad. But it doesn't matter anyway, since making these
-# available to programs is inadvisable.
-# For the key definitions below, all sequences beginning with \E$ are
-# custom and programmed into the terminal via is2. \E$ also has no
-# meaning to any other terminal.
+# Screen Selection (SSL): \E[Pnu
+# Pn= Window number
#
-#------- cmdch=\E[;%p1%d!t
-# Available, but making it available to programs is inadvisable.
-#------- smxon=\E[1*q
-# Available, but making it available to programs is inadvisable.
-# Terminal will send XON/XOFF on buffer overflow.
-#------- rmxon=\E[*q
-# Available, but making it available to programs is inadvisable.
-# Terminal will not notify on buffer overflow.
-#------- smm=\E[2+x
-#------- rmm=\E[+x
-# Available, but making them available to programs is inadvisable.
+# Set Terminal Modes (SM): \E[Pnh
+# Pn= 3 Graphics mode
+# Pn= > Cursor blink
+# Pn= < Enter new line mode
+# Pn= = Enter reverse insert/replace mode
+# Pn= ? Enter no scroll mode
#
-# Printing:
-# It's not made clear in the manuals, but based on other ansi/vt type
-# terminals, it's a good guess that this terminal is capable of both
-# "transparent print" (which doesn't copy data to the screen, and
-# therefore needs mc5i: specified to say so) and "auxilliary print"
-# (which does duplicate printed data on the screen, in which case mc4=
-# and mc5= should use the \E[?4i and \E[?5i strings instead).
-
-hds200|Human Designed Systems HDS200,
- am, bw, eslok, hs, km, mir, msgr, xenl, xon,
- cols#80, it#8, lines#24, lm#0,
- acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
- blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
- clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
- fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
- invis=\E[0;8m,
- is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
- kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
- kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
- kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
- kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
- kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
- kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
- kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
- kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
- kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
- kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
- kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
- kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
- kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
- kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
- nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l,
- rmso=\E[m\017, rmul=\E[m\017, sc=\E7,
- sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
- smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
- vpa=\E[%i%p1%dd, use=ansi+pp,
-
-# <ht> through <el> included to specify padding needed in raw mode.
-# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
-avt-ns|concept avt no status line,
- OTbs, am, eo, mir, ul, xenl, xon,
- cols#80, it#8, lines#24, lm#192,
- acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
- clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
- dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
- hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
- invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
- is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
- kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
- kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
- mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
- pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
- prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
- ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
- rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
- sc=\E7,
- sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e\016%;$<1>,
- sgr0=\E[m\016$<1>, smacs=\017$<1>,
- smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
- smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%p1%{1}%+%dd,
-avt-rv-ns|concept avt in reverse video mode/no status line,
- flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
- use=avt-ns,
-avt-w-ns|concept avt in 132 column mode/no status line,
- is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
- use=avt-ns,
-avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
- flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
- smcup=\E[H\E[1;24;1;132w, use=avt-ns,
-
-# Concept AVT with status line. We get the status line using the
-# "Background status line" feature of the terminal. We swipe the
-# first line of memory in window 2 for the status line, keeping
-# 191 lines of memory and 24 screen lines for regular use.
-# The first line is used instead of the last so that this works
-# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
-# assumes an 8 page AVT but lm isn't currently used anywhere.)
+# Reset Terminal Mode (RM): \E[Pnl
+# Pn= 3 Exit graphics mode
+# Pn= > Exit cursor blink
+# Pn= < Exit new line mode
+# Pn= = Exit reverse insert/replace mode
+# Pn= ? Exit no scroll mode
#
-avt+s|concept avt status line changes,
- eslok, hs,
- lm#191,
- dsl=\E[0*w, fsl=\E[1;1!w,
- is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
- rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
- tsl=\E[2;1!w\E[;%p1%dH\E[2K,
-avt|avt-s|concept-avt|avt w/80 columns,
- use=avt+s, use=avt-ns,
-avt-rv|avt-rv-s|avt reverse video w/sl,
- flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
- use=avt+s, use=avt-ns,
-avt-w|avt-w-s|concept avt 132 cols+status,
- is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
- use=avt+s, use=avt-ns,
-avt-w-rv|avt-w-rv-s|avt wide+status+rv,
- flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
- smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
-
-#### Contel Business Systems.
+# Screen Status Report (SSR): \E[Pnp
+# Pn= 0 Request current window number
+# Pn= 1 Request current window dimensions
#
-
-# Contel c300 and c320 terminals.
-contel300|contel320|c300|Contel Business Systems C-300 or C-320,
- am, in, xon,
- cols#80, lines#24, xmc#1,
- bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
- dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
- el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
- hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
- kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
- kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
- rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
-# Contel c301 and c321 terminals.
-contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
- flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
- use=contel300,
-
-#### Data General (dg)
+# Device Status Report (DSR): \E[6n Request cursor position
#
-# According to James Carlson <carlson@xylogics.com> writing in January 1995,
-# the terminals group at Data General was shut down in 1991; all these
-# terminals have thus been discontinued.
+# Call Status Report (CSR): \E[Pnv
+# Pn= 0 Call failed
+# Pn= 1 Call successful
#
-# DG terminals have function keys that respond to the SHIFT and CTRL keys,
-# e.g., SHIFT-F1 generates a different code from F1. To number the keys
-# sequentially, first the unmodified key codes are listed as F1 through F15.
-# Then their SHIFT versions are listed as F16 through F30, their CTRL versions
-# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
-# F46 through F60. This is done in the private "includes" below whose names
-# start with "dgkeys+".
+# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
+# Pn1= Button number to be loaded
+# Pn2= Character count of "string"
+# Pn3= Key mode being loaded:
+# 0= Unshifted
+# 1= Shifted
+# 2= Control
+# String= Text string (15 chars max)
#
-# DG terminals generally support 8 bit characters. For each of these terminals
-# two descriptions are supplied:
-# 1) A default description for 8 bits/character communications, which
-# uses the default DG international character set and keyboard codes.
-# 2) A description with suffix "-7b" for 7 bits/character communications.
-# This description must use the NON-DEFAULT native keyboard language.
-
-# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
-# Ctrl/Shift fdkeys (kf34-kf44).
-
-dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
- ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
- kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
- kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
- kf11=\233011z, kf12=\233012z, kf13=\233013z,
- kf14=\233014z, kf15=\233000z, kf16=\233101z,
- kf17=\233102z, kf18=\233103z, kf19=\233104z,
- kf2=\233002z, kf20=\233105z, kf21=\233106z,
- kf22=\233107z, kf23=\233108z, kf24=\233109z,
- kf25=\233110z, kf26=\233111z, kf27=\233112z,
- kf28=\233113z, kf29=\233114z, kf3=\233003z,
- kf30=\233100z, kf31=\233201z, kf32=\233202z,
- kf33=\233203z, kf34=\233204z, kf35=\233205z,
- kf36=\233206z, kf37=\233207z, kf38=\233208z,
- kf39=\233209z, kf4=\233004z, kf40=\233210z,
- kf41=\233211z, kf42=\233212z, kf43=\233213z,
- kf44=\233214z, kf45=\233200z, kf46=\233301z,
- kf47=\233302z, kf48=\233303z, kf49=\233304z,
- kf5=\233005z, kf50=\233305z, kf51=\233306z,
- kf52=\233307z, kf53=\233308z, kf54=\233309z,
- kf55=\233310z, kf56=\233311z, kf57=\233312z,
- kf58=\233313z, kf59=\233314z, kf6=\233006z,
- kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
- khome=\233H, kprt=\233i,
-
-dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
- ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
- kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
- kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
- kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
- kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
- kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
- kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
- kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
- kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
- kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
- kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
- kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
- kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
- kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
- kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
- kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
- kf9=\E[009z, khome=\E[H, kprt=\E[i,
-
-dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
- kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
- kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
- kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
- kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
- kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
- kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
- kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
- kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
- kf8=^^x, kf9=^^y, khome=^H,
-
-dgkeys+15|Private entry describing 15 DG mode special keys,
- kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
- kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
- kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
- kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
- kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
- kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
- kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
- kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
- kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
- kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
- kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
- kf9=^^y,
-
-# Data General color terminals use the "Tektronix" color model. The total
-# number of colors varies with the terminal model, as does support for
-# attributes used in conjunction with color.
-
-# Removed u7, u8 definitions since they conflict with tack:
-# Preserve user-defined colors in at least some cases.
-# u7=^^Fh,
-# Default is ACM mode.
-# u8=^^F}20^^Fi^^F}21,
+# Screen Number Report (SNR): \E[Pnp
+# Pn= Screen number
+#
+# Screen Dimension Report (SDR): \E[Pn1;Pn2r
+# Pn1= Number of rows available in window
+# Pn2= Number of columns available in window
+#
+# Cursor Position Report (CPR): \E[Pn1;Pn2R
+# Pn1= "Y" Position of cursor
+# Pn2= "X" Position of cursor
+#
+# Request Answer Back (RAB): \E[c
+#
+# Answer Back Response (ABR): \E[?;*;30;VSV
+# *= 0 No printer available
+# *= 2 Printer available
+# V= Software version number
+# SV= Software sub version number
+# (printer-available field not documented in v1)
+#
+# Screen Alignment Aid: \En
+#
+# Bell (lower pitch): \E[x
+#
+# Dial Phone Number: \EPdstring\
+# string= Phone number to be dialed
+#
+# Set Phone Labels: \EPpstring\
+# string= Label for phone buttons
+#
+# Set Clock: \EPchour;minute;second\
+#
+# Position Clock: \EPsY;X\
+# Y= "Y" coordinate
+# X= "X" coordinate
+#
+# Delete Clock: \Epr\
+#
+# Programming The Function Buttons: \EPfPn;string\
+# Pn= Button number (00-06, 18-24)
+# (kf00-kf06, kf18-kf24)
+# string= Text to sent on button depression
+#
+# The following in version 2 only:
+#
+# Request For Local Directory Data: \EPp12;\
+#
+# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
+#
+# Request for Local Directory Data in print format: \EPp13;\
+#
+# Enable 'Prt on Line' mode: \022 (DC2)
+#
+# Disable 'Prt on Line' mode: \024 (DC4)
#
-dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
- bce,
- colors#16, ncv#53, pairs#256,
- op=\036Ad\036Bd,
- setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
- setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
- setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
-
-dg+fixed|Fixed color info for DG D430C terminals in DG mode,
- use=dgunix+fixed,
-
-# Video attributes are coordinated using static variables set by "sgr", then
-# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
-# (D=dim, U=underline, B=blink, R=reverse.)
-dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
- bce,
- colors#8, ncv#16, pairs#64,
- op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
- setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
-
-dg+color|Color info for Data General D470C terminals in ANSI mode,
- colors#16, ncv#53, pairs#256,
- setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
- use=dg+color8,
-
-dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
- bce,
- colors#8, ncv#16, pairs#64,
- op=\036Ad\036Bd,
- setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
- setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
- setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
-
-dgmode+color|Color info for Data General D470C terminals in DG mode,
- colors#16, pairs#256,
- setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
- setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
- use=dgmode+color8,
-
-dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
- bce, ccc,
- colors#52, ncv#53, pairs#26,
- initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
- oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
- op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
- scp=\036RG2%p1%02X,
-
-# Colors are in the order: normal, reverse, dim, dim + reverse.
-dg+ccc|Configurable color info for DG D430C terminals in DG mode,
- bce, ccc,
- colors#52, ncv#53, pairs#26,
- initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
- oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
- op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
- scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
-
-# The generic DG terminal type (an 8-bit-clean subset of the 6053)
-# Initialization string 1 sets:
-# ^R - vertical scrolling enabled
-# ^C - blinking enabled
-dg-generic|Generic Data General terminal in DG mode,
- am, bw, msgr, xon,
- cols#80, lines#24,
- bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
- cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
- mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
- smul=^T, use=dgkeys+11,
-
-# According to the 4.4BSD termcap file, the dg200 <cup> should be the
-# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
-# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
-# maybe they were originally nuls (which would fit).
-dg200|data general dasher 200,
- OTbs, am, bw,
- cols#80, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
- cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
- kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
- kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
- kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
- smso=^^D, smul=^T,
+# 05-Aug-86:
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 2 and later.
+att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
+ am, xon,
+ cols#80, it#8, lines#24,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
+ cnorm=\E[>l, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
+ il=\E[%p1%dL, il1=\E[L, ind=\n,
+ is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
+ kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
+ kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
+ kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
+ kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
+ krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
+ rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
+ rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
+ smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
-# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
-dg210|dg-ansi|Data General 210/211,
- am,
- cols#80, lines#24,
- OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
- home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
- smso=\E[7;m, smul=\E[4;m,
-# From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
-# courtesy of Carlos Rucalde of Vantage Software, Inc.
-# (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
-# I suspect the d200 function keys actually work on the dg211, check it out.)
-dg211|Data General d211,
- cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
- kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
- rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
+# The following Terminfo entry describes functions which are supported by
+# the AT&T 5430/pt505 terminal software version 1.
+att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
+ lines#24,
+ mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
+tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
+ lines#22, use=att505,
+#
+#### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
+# This cut mark helps make life less painful for people running ncurses tic
+# on machines with relatively little RAM. The file can be broken in half here
+# cleanly and compiled in sections -- no `use' references cross this cut
+# going forward.
+#
-# dg450 from Cornell (not official)
-dg450|dg6134|data general 6134,
- cub1@, cuf1=^X, use=dg200,
+#### Ampex (Dialogue)
+#
+# Yes, these are the same people who are better-known for making audio- and
+# videotape. I'm told they are located in Redwood City, CA.
+#
-# Not official...
-# Note: lesser Dasher terminals will not work with vi because vi insists upon
-# having a command to move straight down from any position on the bottom line
-# and scroll the screen up, or a direct vertical scroll command. The 460 and
-# above have both, the D210/211, for instance, has neither. We must use ANSI
-# mode rather than DG mode because standard UNIX tty drivers assume that ^H is
-# backspace on all terminals. This is not so in DG mode.
-# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
-# grounds that there is no matching ":ml:"
-dg460-ansi|Data General Dasher 460 in ANSI-mode,
- OTbs, am, msgr, ul,
- cols#80, it#8, lines#24,
- OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
- cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
- dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
- ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
- kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
- kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
- lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
- mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
- sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m,
- sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
- u7=\E[6n, u8=\E[5n, u9=\E[0n,
-# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
-# Data General 605x
-# Ought to work for a Model 6242, Type D210 as well as a 605x.
-# Note that the cursor-down key transmits ^Z. Job control users, beware!
-# This also matches a posted description of something called a `Dasher 100'
-# so there's a dg100 alias here.
-# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
-dg6053-old|dg100|data general 6053,
+# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
+# (ampex80: some capabilities merged in from SCO's entry -- esr)
+ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
OTbs, am, bw, ul,
+ cols#80, it#8, lines#24,
+ bel=^G, cbt=\EI, clear=\E*$<75>, cr=\r, cub1=^H, cud1=\n,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
+ ich1=\EQ, il1=\EE$<5*>, ind=\n, is2=\EA, rmso=\Ek, rmul=\Em,
+ smso=\Ej, smul=\El, tbc=\E3,
+# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
+ampex175|ampex d175,
+ am,
cols#80, lines#24,
- OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
- cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
- home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
- kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
- kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
- rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
- smul=^T,
-
-# (Some performance can be gained over the generic DG terminal type)
-dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
- xon@,
- home=^P\0\0, ll=^P\0^W, use=dg-generic,
-
-# Like 6053, but adds reverse video and more keypad and function keys.
-d200|d200-dg|Data General DASHER D200,
- bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
- sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
- sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
- use=dg6053,
+ bel=^G, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=\n,
+ is2=\EX\EA\EF, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
+ kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
+ rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
+# No backspace key in the main QWERTY cluster. Fortunately, it has a
+# NEWLINE/PAGE key just above RETURN that sends a strange single-character
+# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
+# mode), this key can be used as the erase key; I find I like this. Because
+# some people and some systems may not, there is another termcap ("ampex175")
+# that suppresses this little eccentricity by omitting the relevant capability.
+ampex175-b|ampex d175 using left arrow for erase,
+ kbs=^_, use=ampex175,
+# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
+# (ampex210: removed obsolete ":kn#10:" -- esr)
+ampex210|a210|ampex a210,
+ OTbs, am, hs, xenl,
+ cols#80, it#8, lines#24, xmc#1,
+ cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
+ fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
+ if=/usr/share/tabset/std, il1=\EE, invis@,
+ is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
+ kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
+ kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
+ kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
+ tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
+# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
+# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
+# and moved the padding to be *after* the caps -- esr)
+ampex219|ampex-219|amp219|Ampex with Automargins,
+ hs, xenl,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
+ clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=\r,
+ csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
+ cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
+ cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
+ el=\E[K$<3>, home=\E[H, ht=^I, ind=\n,
+ is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
+ kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
+ rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
+ rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
+ smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
+ampex219w|ampex-219w|amp219w|Ampex 132 cols,
+ cols#132, lines#24,
+ bel=^G, cr=\r, cud1=\n, ind=\n,
+ is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
+# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
+ampex232|ampex-232|Ampex Model 232,
+ am,
+ cols#80, lines#24, xmc#1,
+ cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
+ flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
+ invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
+ kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
+ kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
+ kf9=^AI\r, khome=^^, use=adm+sgr,
+# (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
+ampex232w|Ampex Model 232 / 132 columns,
+ cols#132, lines#24,
+ is2=\E\034Eg\El, use=ampex232,
-# DASHER D210 series terminals in ANSI mode.
-# Reverse video, no insert/delete character/line, 7 bits/character only.
+#### Ann Arbor (aa)
#
-# Initialization string 1 sets:
-# <0 - scrolling enabled
-# <1 - blink enabled
-# <4 - print characters regardless of attributes
-d210|d214|Data General DASHER D210 series,
- am, bw, msgr, xon,
- cols#80, lines#24,
- bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
- el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
- ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
- sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|%p6%|%t7;%;m,
- sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
-
-# DASHER D210 series terminals in DG mode.
-# Like D200, but adds clear to end-of-screen and needs XON/XOFF.
-d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
- xon,
- ed=^^FF, use=d200-dg,
-
-# DASHER D211 series terminals in ANSI mode.
-# Like the D210, but with 8-bit characters and local printer support.
+# Ann Arbor made dream terminals for hackers -- large screen sizes and huge
+# numbers of function keys. At least some used monitors in portrait mode,
+# allowing up to 76-character screen heights! They were reachable at:
#
-# Initialization string 2 sets:
-# \E[2;1;1;1v
-# 2;1 - 8 bit operations
-# 1;1 - 8 bit (international) keyboard language
-# \E(B - default primary character set (U.S. ASCII)
-# \E)4 - default secondary character set (international)
-# ^O - primary character set
+# Ann Arbor Terminals
+# 6175 Jackson Road
+# Ann Arbor, MI 48103
+# (313)-663-8000
+#
+# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
+# can't be found on the Web; I fear they're long dead. R.I.P.
#
-d211|d215|Data General DASHER D211 series,
- km,
- is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
- use=d210,
-# Initialization string 2 sets:
-# \E[2;0;1;0v
-# 2;0 - 7 bit operations
-# 1;0 - 7 bit (native) keyboard language
-# \E(0 - default character set (the keyboard native language)
-# ^O - primary character set
-d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
- km@,
- is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
-# Like the D210 series, but adds support for 8-bit characters.
+# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
+# Highly modified 6/22 by Mike O'Brien.
+# split out into several for the various screen sizes by dave-yost@rand
+# Modifications made 3/82 by Mark Horton
+# Modified by Tom Quarles at UCB for greater efficiency and more diversity
+# status line moved to top of screen, <flash> removed 5/82
+# Some unknown person at SCO then hacked the init strings to make them more
+# efficient.
#
-# Reset string 2 sets:
-# ^^N - secondary character set
-# ^^FS0> - 8 bit international character set
-# ^^O - primary character set
-# ^^FS00 - default character set (matching the native keyboard language)
+# assumes the following setup:
+# A menu: 0000 1010 0001 0000
+# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
+# C menu: 56 66 0 0 9600 0110 1100
+# D menu: 0110 1001 1 0
#
-d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
- km,
- rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
-
-d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
- use=d211-dg,
-
-# Enhanced DG mode with changes to be more UNIX compatible.
-d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
- mc5i,
- it#8,
- acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
- clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
- el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
- is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
- kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
- kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
- mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
- rs2=\036N\036FS0E\036O\036FS00,
- sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
- sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
- vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
-d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
- lines#25,
- is3=\036Fz2, use=d216+,
-
-d217-unix|Data General DASHER D217 in DG-UNIX mode,
- use=d216-unix,
-d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
- use=d216-unix-25,
-
-# DASHER D220 color terminal in ANSI mode.
-# Like the D470C but with fewer colors and screen editing features.
+# Briefly, the settings are for the following modes:
+# (values are for bit set/clear with * indicating our preference
+# and the value used to test these termcaps)
+# Note that many of these settings are irrelevant to the terminfo
+# and are just set to the default mode of the terminal as shipped
+# by the factory.
#
-# Initialization string 1 sets:
-# \E[<0;<1;<4l
-# <0 - scrolling enabled
-# <1 - blink enabled
-# <4 - print characters regardless of attributes
-# \E[m - all attributes off
-# Reset string 1 sets:
-# \Ec - initial mode defaults (RIS)
+# A menu: 0000 1010 0001 0000
+# Block/underline cursor*
+# blinking/nonblinking cursor*
+# key click/no key click*
+# bell/no bell at column 72*
#
-d220|Data General DASHER D220,
- mc5i@,
- dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
- use=dg+color8, use=d470c,
-
-d220-7b|Data General DASHER D220 in 7 bit mode,
- mc5i@,
- dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
- use=dg+color8, use=d470c-7b,
-
-# Initialization string 3 sets:
-# - default cursor (solid rectangle)
-# Reset string 2 sets:
-# ^^N - secondary character set
-# ^^FS0> - 8 bit international character set
-# ^^O - primary character set
-# ^^FS00 - default character set (matching the native keyboard language)
+# key pad is cursor control*/key pad is numeric
+# return and line feed/return for <cr> key *
+# repeat after .5 sec*/no repeat
+# repeat at 25/15 chars per sec. *
#
-d220-dg|Data General DASHER D220 color terminal in DG mode,
- mc5i@,
- dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
- rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
- use=d470c-dg,
-
-# DASHER D230C color terminal in ANSI mode.
-# Like the D220 but with minor ANSI compatibility improvements.
+# hold data until pause pressed/process data unless pause pressed*
+# slow scroll/no slow scroll*
+# Hold in area/don't hold in area*
+# functions keys have default*/function keys disabled on powerup
#
-d230c|d230|Data General DASHER D230C,
- blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
- rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
- sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
- sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
- smul=\E[4;50m, use=dgkeys+7b, use=d220,
-
-d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
- use=d220-dg,
-
-# DASHER D400/D450 series terminals.
-# These add intelligent features like insert/delete to the D200 series.
+# show/don't show position of cursor during page transmit*
+# unused
+# unused
+# unused
#
-# Initialization string 2 sets:
-# ^^FQ2 - default cursor (solid rectangle)
-# ^^FW - character protection disabled
-# ^^FJ - normal (80 column) mode
-# ^^F\^ - horizontal scrolling enabled (for alignment)
-# ^^FX004? - margins at columns 0 and 79
-# ^^F] - horizontal scrolling disabled
-# ^^O - primary character set
-# ^^FS00 - default character set (the keyboard native language)
-# - (should reset scrolling regions, but that glitches the screen)
-# Reset string 1 sets:
-# ^^FA - all terminal defaults except scroll rate
-# Reset string 2 sets:
-# ^^F] - horizontal scrolling disabled
-# ^^FT0 - jump scrolling
+# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
+# Baud rate (9600*)
#
-d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
- mc5i,
- acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
- cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
- enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
- ich1=^^J, il1=^^FH,
- is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
- ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
- rs1=^^FA, rs2=\036F]\036FT0,
- sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
- sgr0=\017\025\035\036E\036O, smacs=^^N,
- vpa=\020\177%p1%c, use=d210-dg,
-
-# DASHER D410/D460 series terminals in ANSI mode.
-# These add a large number of intelligent terminal features.
+# 2 bits of parity - 00=odd,01=even*,10=space,11=mark
+# 1 stop bit*/2 stop bits
+# parity error detection off*/on
#
-# Initialization string 1 sets:
-# \E[<0;<1;<2;<4l
-# <0 - scrolling enabled
-# <1 - blink enabled
-# <2 - horizontal scrolling enabled (for alignment)
-# <4 - print characters regardless of attributes
-# \E[5;0v - normal (80 column) mode
-# \E[1;1;80w - margins at columns 1 and 80
-# \E[1;6;<2h
-# 1 - print all characters even if protected
-# 6 - character protection disabled
-# <2 - horizontal scrolling disabled
-# - (should reset scrolling regions, but that glitches the screen)
+# keyboard local/on line*
+# half/full duplex*
+# disable/do not disable keyboard after data transmission*
#
-# Initialization string 2 sets:
-# \E[3;2;2;1;1;1v
-# 3;2 - default cursor (solid rectangle)
-# 2;1 - 8 bit operations
-# 1;1 - international keyboard language
-# \E(B - default primary character set (U.S. ASCII)
-# \E)4 - default secondary character set (international)
-# ^O - primary character set
+# transmit entire page/stop transmission at cursor*
+# transfer/do not transfer protected characters*
+# transmit all characters/transmit only selected characters*
+# transmit all selected areas/transmit only 1 selected area*
#
-# Reset string 1 sets:
-# \Ec - initial mode defaults (RIS)
-# \E[<2h - horizontal scrolling disabled
+# transmit/do not transmit line separators to host*
+# transmit/do not transmit page tab stops tabs to host*
+# transmit/do not transmit column tab stop tabs to host*
+# transmit/do not transmit graphics control (underline,inverse..)*
#
-# Reset string 2 sets:
-# \E[4;0;2;1;1;1v
-# 4;0 - jump scrolling
-# 2;1 - 8 bit operations
-# 1;1 - 8 bit (international) keyboard language
-# \E(B - default primary character set (U.S. ASCII)
-# \E)4 - default secondary character set (international)
+# enable*/disable auto XON/XOFF control
+# require/do not require receipt of a DC1 from host after each LF*
+# pause key acts as a meta key/pause key is pause*
+# unused
#
-d410|d411|d460|d461|Data General DASHER D410/D460 series,
- mc5i,
- acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
- cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
- is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
- is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
- ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
- rs2=\E[4;0;2;1;1;1v\E(B\E)4,
- sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5%|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
- sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
-
-# Initialization string 2 sets:
-# \E[3;2;2;0;1;0v
-# 3;2 - default cursor (solid rectangle)
-# 2;0 - 7 bit operations
-# 1;0 - 7 bit (native) keyboard language
-# \E(0 - default character set (the keyboard native language)
-# ^O - primary character set
+# unused
+# unused
+# unused
+# unused
#
-# Reset string 2 sets:
-# \E[4;0;2;0;1;0v
-# 4;0 - jump scrolling
-# 2;0 - 7 bit operations
-# 1;0 - 7 bit (native) keyboard language
-# \E(0 - default character set (the keyboard native language)
+# XON character (17*)
+# XOFF character (19*)
#
-d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
- km@,
- enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
- rs2=\E[4;0;2;0;1;0v\E(0,
- sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
-
-d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
- km,
- enacs@, rmacs=\036FS00,
- sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
- sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
- use=d400-dg,
-
-# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
+# C menu: 56 66 0 0 9600 0110 1100
+# number of lines to print data on (printer) (56*)
#
-# Initialization string 1 sets:
-# \E[<0;<1;<2;<4l
-# <0 - scrolling enabled
-# <1 - blink enabled
-# <2 - horizontal scrolling enabled (for alignment)
-# <4 - print characters regardless of attributes
-# \E[5;1v - compressed (135 column) mode
-# \E[1;1;126 - margins at columns 1 and 126
-# \E[1;6;<2h
-# 1 - print all characters even if protected
-# 6 - character protection disabled
-# <2 - horizontal scrolling disabled
-# - (should reset scrolling regions, but that glitches the screen)
+# number of lines on a sheet of paper (printer) (66*)
#
-# Reset string 1 sets:
-# \Ec - initial mode defaults (RIS)
-# \E[5;1v - compressed (135 column) mode
-# \E[1;1;126w - margins at columns 1 and 126
-# \E[<2h - horizontal scrolling disabled
+# left margin (printer) (0*)
#
-d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
- cols#126,
- is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
- rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
-
-d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
- cols#126,
- is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
- rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
-
-d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
- use=d410-dg,
-
-# These add intelligent features like scrolling regions.
-d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
- civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
- cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
- home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
- is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
- ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
- rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
- vpa=\036FPFF%p1%2.2X,
- wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
- use=d216+,
-d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
- cols#132,
- is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
- rs2=\036P@1\036FK\036FX0083,
- wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
- use=d412-unix,
-d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
- lines#25,
- is3=\036Fz2,
- wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
- use=d462+,
-d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
- eslok, hs,
- clear=\036FG\036PH, fsl=\036F}01\022,
- is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
- tsl=\036F}00\036FP%p1%2.2X18\036PG,
- wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
- use=d462+,
-
-# Relative cursor motions are confined to the current window,
-# which is not what the scrolling region specification expects.
-# Thus, relative vertical cursor positioning must be deleted.
-d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
- csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
- cud1@, cuu1@, ll@, use=d462+,
-
-d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
- use=d412-unix,
-d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
- use=d412-unix-w,
-d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
- use=d412-unix-25,
-d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
- use=d412-unix-s,
-d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
- use=d412-unix-sr,
-
-d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
- use=d413-unix,
-d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
- use=d413-unix-w,
-d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
- use=d413-unix-25,
-d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
- use=d413-unix-s,
-d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
- use=d413-unix-sr,
-
-d430c-dg|d430-dg|Data General D430C in DG mode,
- use=d413-dg, use=dg+fixed,
-d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
- use=d413-dg, use=dg+ccc,
-
-d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
- use=d413-unix, use=dgunix+fixed,
-d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
- use=d413-unix-w, use=dgunix+fixed,
-d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
- use=d413-unix-25, use=dgunix+fixed,
-d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
- use=d413-unix-s, use=dgunix+fixed,
-d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
- use=d413-unix-sr, use=dgunix+fixed,
-d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
- use=d413-unix, use=dgunix+ccc,
-d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
- use=d413-unix-w, use=dgunix+ccc,
-d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
- use=d413-unix-25, use=dgunix+ccc,
-d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
- use=d413-unix-s, use=dgunix+ccc,
-d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
- use=d413-unix-sr, use=dgunix+ccc,
-
-# DASHER D470C color terminal in ANSI mode.
-# Like the D460 but with 16 colors and without a compressed mode.
+# number of pad chars on new line to printer (0*)
#
-# Initialization string 1 sets:
-# \E[<0;<1;<2;<4l
-# <0 - scrolling enabled
-# <1 - blink enabled
-# <2 - horizontal scrolling enabled (for alignment)
-# <4 - print characters regardless of attributes
-# \E[1;1;80w - margins at columns 1 and 80
-# \E[1;6;<2h
-# 1 - print all characters even if protected
-# 6 - character protection disabled
-# <2 - horizontal scrolling disabled
-# - (should reset scrolling regions, but that glitches the screen)
+# printer baud rate (9600*)
#
-d470c|d470|Data General DASHER D470C,
- is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
- sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
- use=dg+color, use=d460,
-
-d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
- is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
- sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
- use=dg+color, use=d460-7b,
-
-# Initialization string 2 sets:
-# ^^FQ2 - default cursor (solid rectangle)
-# ^^FW - character protection disabled
-# ^^F\^ - horizontal scrolling enabled (for alignment)
-# ^^FX004? - margins at columns 0 and 79
-# ^^F] - horizontal scrolling disabled
-# ^^O - primary character set
-# ^^FS00 - default character set (the keyboard native language)
-# - (should reset scrolling regions, but that glitches the screen)
+# printer parity: 00=odd,01=even*,10=space,11=mark
+# printer stop bits: 2*/1
+# print/do not print guarded areas*
#
-d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
- is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
- use=dgmode+color, use=d460-dg,
-
-# DASHER D555 terminal in ANSI mode.
-# Like a D411, but has an integrated phone.
-d555|Data General DASHER D555,
- use=d411,
-d555-7b|Data General DASHER D555 in 7-bit mode,
- use=d411-7b,
-d555-w|Data General DASHER D555 in wide mode,
- use=d411-w,
-d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
- use=d411-7b-w,
-d555-dg|Data General DASHER D555 series in DG mode,
- use=d411-dg,
-
-# DASHER D577 terminal in ANSI mode.
-# Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
-d577|Data General DASHER D577,
- use=d411,
-d577-7b|Data General DASHER D577 in 7-bit mode,
- use=d411-7b,
-d577-w|Data General DASHER D577 in wide mode,
- use=d411-w,
-d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
- use=d411-7b-w,
-
-d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
- use=d411-dg,
-
-# DASHER D578 terminal.
-# Like a D577, but without compressed mode; like a D470C in this respect.
+# new line is: 01=LF,10=CR,11=CRLF*
+# unused
+# unused
#
-# Initialization string 1 sets:
-# \E[<0;<1;<2;<4l
-# <0 - scrolling enabled
-# <1 - blink enabled
-# <2 - horizontal scrolling enabled (for alignment)
-# <4 - print characters regardless of attributes
-# \E[1;1;80w - margins at columns 1 and 80
-# \E[1;6;<2h
-# 1 - print all characters even if protected
-# 6 - character protection disabled
-# <2 - horizontal scrolling disabled
-# - (should reset scrolling regions, but that glitches the screen)
+# D menu: 0110 1001 1 0
+# LF is newline/LF is down one line, same column*
+# wrap to preceding line if move left from col 1*/don't wrap
+# wrap to next line if move right from col 80*/don't wrap
+# backspace is/is not destructive*
+#
+# display*/ignore DEL character
+# display will not/will scroll*
+# page/column tab stops*
+# erase everything*/erase unprotected only
#
-d578|Data General DASHER D578,
- is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
-d578-7b|Data General DASHER D578 in 7-bit mode,
- is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
-
-#### Datamedia (dm)
+# editing extent: 0=display,1=line*,2=field,3=area
#
-# Datamedia was headquartered in Nashua, New Hampshire until it went
-# out of business in 1993, but the ID plates on the terminals referred
-# to the factory in Pennsauken, NJ. The factory was sold to a PCB board
-# manufacturer which threw out all information about the terminals.
+# unused
#
-cs10|colorscan|Datamedia Color Scan 10,
- msgr,
- cols#80, lines#24,
- bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
- ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smso=\E[7m, smul=\E[4m,
-cs10-w|Datamedia Color Scan 10 with 132 columns,
- cols#132,
- cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
+annarbor4080|aa4080|ann arbor 4080,
+ OTbs, am,
+ cols#80, lines#40,
+ bel=^G, clear=\014$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=^_,
+ cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t
+ %{12}%+%;%{64}%+%c,
+ cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=\n, kbs=^^, kcub1=^H,
+ kcud1=\n, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
-# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
-dm1520|dm1521|datamedia 1520,
- OTbs, am, xenl,
- cols#80, it#8, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
- cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
- home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
- khome=^Y,
-# dm2500: this terminal has both <ich> and <smir>. Applications using
-# termcap/terminfo directly (rather than through ncurses) might be confused.
-dm2500|datamedia2500|datamedia 2500,
- OTbs, OTnc,
+# Strange Ann Arbor terminal from BRL
+aas1901|Ann Arbor K4080 w/S1901 mod,
+ am,
+ cols#80, lines#40,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^N,
+ home=^K, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, ll=^O\0c,
+ nel=\r\n,
+
+# If you're using the GNU termcap library, add
+# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
+# to these capabilities. This is the nonstandard GNU termcap scrolling
+# capability, arguments are:
+# 1. Total number of lines on the screen.
+# 2. Number of lines above desired scroll region.
+# 3. Number of lines below (outside of) desired scroll region.
+# 4. Total number of lines on the screen, the same as the first parameter.
+# The generic Ann Arbor entry is the only one that uses this.
+aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
+ OTbs, am, km, mc5i, mir, xon,
+ cols#80, it#8,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ clear=\E[H\E[J$<156>, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+ el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
+ hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
+ il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
+ is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
+ kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
+ kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
+ kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
+ kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
+ kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
+ khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
+ mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, rev=\E[7m,
+ rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E
+ \\,
+ rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
+ %;%?%p7%t8;%;m,
+ sgr0=\E[m,
+ smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E
+ \\,
+ smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
+
+aaa+rv|ann arbor ambassador in reverse video,
+ blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
+ is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
+ rs1=\E[H\E[7m\E[J$<156>,
+ sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%|%t7
+ ;%;%?%p7%t8;%;m\016,
+ sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
+# Ambassador with the DEC option, for partial vt100 compatibility.
+aaa+dec|ann arbor ambassador in dec vt100 mode,
+ acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
+ csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
+ sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?
+ %p7%t8;%;m%?%p9%t\017%e\016%;,
+ smacs=^O,
+aaa-18|ann arbor ambassador/18 lines,
+ lines#18,
+ is2=\E7\E[60;0;0;18p\E8,
+ rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
+ use=aaa+unk,
+aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
+ use=aaa+rv, use=aaa-18,
+aaa-20|ann arbor ambassador/20 lines,
+ lines#20,
+ is2=\E7\E[60;0;0;20p\E8,
+ rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
+ use=aaa+unk,
+aaa-22|ann arbor ambassador/22 lines,
+ lines#22,
+ is2=\E7\E[60;0;0;22p\E8,
+ rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
+ use=aaa+unk,
+aaa-24|ann arbor ambassador/24 lines,
+ lines#24,
+ is2=\E7\E[60;0;0;24p\E8,
+ rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
+ use=aaa+unk,
+aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
+ use=aaa+rv, use=aaa-24,
+aaa-26|ann arbor ambassador/26 lines,
+ lines#26,
+ is2=\E7\E[60;0;0;26p\E8,
+ rmcup=\E[60;0;0;26p\E[26;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
+aaa-28|ann arbor ambassador/28 lines,
+ lines#28,
+ is2=\E7\E[60;0;0;28p\E8,
+ rmcup=\E[60;0;0;28p\E[28;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
+aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
+ eslok, hs,
+ lines#29,
+ dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
+ fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
+ rmcup=\E[60;1;0;30p\E[29;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
+ tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
+aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
+ use=aaa+rv, use=aaa-30-s,
+aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
+ rmcup=\E[60;1;0;30p\E[59;1H\E[K,
+ smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
+aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
+ rmcup=\E[60;1;0;30p\E[59;1H\E[K,
+ smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
+aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
+ lines#30,
+ is2=\E7\E[60;0;0;30p\E8,
+ rmcup=\E[60;0;0;30p\E[30;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
+aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
+ use=aaa+rv, use=aaa-30,
+aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
+ rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
+ use=aaa-30,
+aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
+ rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
+ use=aaa+rv, use=aaa-30,
+aaa-36|ann arbor ambassador/36 lines,
+ lines#36,
+ is2=\E7\E[60;0;0;36p\E8,
+ rmcup=\E[60;0;0;36p\E[36;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
+aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
+ use=aaa+rv, use=aaa-36,
+aaa-40|ann arbor ambassador/40 lines,
+ lines#40,
+ is2=\E7\E[60;0;0;40p\E8,
+ rmcup=\E[60;0;0;40p\E[40;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
+aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
+ use=aaa+rv, use=aaa-40,
+aaa-48|ann arbor ambassador/48 lines,
+ lines#48,
+ is2=\E7\E[60;0;0;48p\E8,
+ rmcup=\E[60;0;0;48p\E[48;1H\E[K,
+ smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
+aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
+ use=aaa+rv, use=aaa-48,
+aaa-60-s|ann arbor ambassador/59 lines+status,
+ eslok, hs,
+ lines#59,
+ dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
+ fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
+ tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
+aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
+ use=aaa+rv, use=aaa-60-s,
+aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
+ use=aaa+dec, use=aaa+rv, use=aaa-60-s,
+aaa-60|ann arbor ambassador/60 lines,
+ lines#60,
+ is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
+ use=aaa+unk,
+aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
+ use=aaa+rv, use=aaa-60,
+aaa-db|ann arbor ambassador 30/destructive backspace,
+ OTbs@,
+ cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
+
+guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
+ lines#33,
+ flash=\E[>59h$<100>\E[>59l,
+ is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
+ rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
+guru+rv|guru changes for reverse video,
+ flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
+guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
+ use=guru+rv, use=guru-33,
+guru+s|guru status line,
+ eslok, hs,
+ dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
+ rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
+ tsl=\E[>51h\E[1;%p1%dH\E[2K,
+guru-nctxt|guru with no saved context,
+ smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
+guru-s|guru-33-s|ann arbor guru/33 lines+status,
+ lines#32,
+ is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
+ smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-24|ann arbor guru 24 lines,
cols#80, lines#24,
- bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
- cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
- dch1=\020\010\030\035$<10*>,
- dl1=\020\032\030\035$<10*>, el=^W, home=^B,
- ich1=\020\034\030\035$<10*>,
- il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
- rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
- smdc=^P, smir=^P, smso=^N,
-# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
-# also, has a meta-key.
-# From: <goldberger@su-csli.arpa>
-# (dmchat: ":MT:" changed to ":km:" -- esr)
-dmchat|dmchat version of datamedia 2500,
- km,
- dl1=\020\032\030\035$<2/>,
- il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
-# (dm3025: ":MT:" changed to ":km:" -- esr)
-dm3025|datamedia 3025a,
- OTbs, km,
- cols#80, it#8, lines#24,
- bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
- dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
- home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
- is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
- smir=\EP, smso=\EO1,
-dm3045|datamedia 3045a,
- OTbs, am, eo, km@, ul, xenl,
- dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
- kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
- kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
- khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
- use=dm3025,
-# Datamedia DT80 soft switches:
-# 1 0=Jump 1=Smooth
-# Autorepeat 0=off 1=on
-# Screen 0=Dark 1=light
-# Cursor 0=u/l 1=block
-#
-# 2 Margin Bell 0=off 1=on
-# Keyclick 0=off 1=on
-# Ansi/VT52 0=VT52 1=Ansi
-# Xon/Xoff 0=Off 1=On
+ is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
+ use=guru+unk,
+guru-44|ann arbor guru 44 lines,
+ cols#97, lines#44,
+ is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
+ use=guru+unk,
+guru-44-s|ann arbor guru/44 lines+status,
+ lines#43,
+ is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
+ smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-76|guru with 76 lines by 89 cols,
+ cols#89, lines#76,
+ is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+guru-76-s|ann arbor guru/76 lines+status,
+ cols#89, lines#75,
+ is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
+ smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-76-lp|guru-lp|guru with page bigger than line printer,
+ cols#134, lines#76,
+ is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+guru-76-w|guru 76 lines by 178 cols,
+ cols#178, lines#76,
+ is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+guru-76-w-s|ann arbor guru/76 lines+status+wide,
+ cols#178, lines#75,
+ is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
+ smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
+guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
+ cols#178, lines#76,
+ is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
+ use=guru+unk,
+aaa-rv-unk|ann arbor unknown type,
+ lh#0, lw#0, nlab#0,
+ blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
+ is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
+ rs1=\E[H\E[7m\E[J,
+ sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t
+ 7;%;%?%p7%t8;%;m,
+ sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
+
+#### Applied Digital Data Systems (adds)
#
-# 3 Shift3 0=Hash 1=UK Pound
-# Wrap 0=Off 1=On
-# Newline 0=Off 1=On
-# Interlace 0=Off 1=On
+# ADDS itself is long gone. ADDS was bought by NCR, and the same group made
+# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
+# terminals was merged again. Then AT&T sold the terminal business to
+# SunRiver, which later changed its name to Boundless Technologies. The
+# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
+# as of early 1995) are at:
#
-# 4 Parity 0=Odd 1=Even
-# Parity 0=Off 1=On
-# Bits/Char 0=7 1=8
-# Power 0=60Hz 1=50Hz
+# Boundless Technologies
+# 100 Marcus Boulevard
+# Hauppauge, NY 11788-3762
+# Vox: (800)-231-5445
+# Fax: (516)-342-7378
+# Web: http://boundless.com
#
-# 5 Line Interface 0=EIA 1=Loop
-# Aux Interface 0=EIA 1=Loop
-# Local Copy 0=Off 1=On
-# Spare
+# Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
+# In 1995 Boundless acquired DEC's terminals business.
#
-# 6 Aux Parity 0=Odd 1=Even
-# Aux Parity 0=Off 1=On
-# Aux Bits/Char 0=7 1=8
-# CRT Saver 0=Off 1=On
-# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
-dm80|dmdt80|dt80|datamedia dt80/1,
- clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
- cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
- home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
- rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
- use=vt100,
-# except in 132 column mode, where it needs a little padding.
-# This is still less padding than the vt100, and you can always turn on
-# the ^S/^Q handshaking, so you can use vt100 flavors for things like
-# reverse video.
-dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
- cols#132,
- clear=\E[H\E[2J$<50/>, cud1=^J,
- cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
- ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
-# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
-dt80-sas|Datamedia DT803/DTX for SAS usage,
- am, bw,
- cols#80, lines#24,
- acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
- bel=^G, clear=^L, cr=^M,
- csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
- cub1=^H, cud1=\EB, cuf1=^\,
- cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
- el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
- is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
- kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
- rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
- smso=\E$2\004, tbc=\E'0,
-# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
-# These aren't end-all Excel termcaps; but do insert/delete char/line
-# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
-# The naming convention has been bent somewhat, with the use of E? (where
-# E is for 'Excel') as # a name. This was done to distinguish the entries
-# from the other Datamedias in use here, and yet to associate a model of
-# the Excel terminals with the regular datamedia terminals that share
-# major characteristics.
-excel62|excel64|datamedia Excel 62,
- dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
- kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
- use=dt80,
-excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
- dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
- kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
- use=dt80w,
-excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
- dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
- kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
- smir=\E[4h, use=dt80,
+# Regent: lowest common denominator, works on all regents.
+# (regent: renamed ":bc:" to ":le:" -- esr)
+regent|Adds Regent Series,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F, cuu1=^Z,
+ home=\EY\s\s, ind=\n, ll=^A,
+# Regent 100 has a bug where if computer sends escape when user is holding
+# down shift key it gets confused, so we avoid escape.
+regent100|Adds Regent 100,
+ xmc#1,
+ bel=^G,
+ cup=\013%p1%'\s'%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
+ kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
+ kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
+ lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
+ sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
+regent20|Adds Regent 20,
+ bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
+ use=regent,
+regent25|Adds Regent 25,
+ bel=^G, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z, khome=^A,
+ use=regent20,
+regent40|Adds Regent 40,
+ xmc#1,
+ bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf1=^B1\r, kf2=^B2\r,
+ kf3=^B3\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
+ kf8=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
+ lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
+ smul=\E0`, use=regent25,
+regent40+|Adds Regent 40+,
+ is2=\EB, use=regent40,
+# It uses a different code for mapping acs vs dim/blink.
+regent60|regent200|adds200|Adds Regent 60,
+ acsc=jLkDl@mHnhq`tXuTv\\wPxd, dch1=\EE, ed=\Ek,
+ is2=\EV\EB, kbs=^H, kcbt=\EO, kdch1=\EE, kich1=\EF,
+ krmir=\EF, rmacs=\E2, rmir=\EF, rmso=\ER\E0@\EV, smacs=\E1,
+ smir=\EF, smso=\ER\E0P\EV, kF1=^B!\r, kF2=^B"\r, kF3=^B#\r,
+ kF4=^B$\r, kF5=^B%\r, kF6=^B&\r, kF7=^B'\r, kF8=^B(\r,
+ use=regent40+,
+# From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
+# (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
+viewpoint|addsviewpoint|adds viewpoint,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cnorm=\017\E0`, cr=\r, cub1=^H, cud1=\n,
+ cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
+ cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
+ ind=\n, is2=\017\E0`, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
+ kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
+ rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
+# Some viewpoints have bad ROMs that foo up on ^O
+screwpoint|adds viewpoint with ^O bug,
+ cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
-#### Falco
+# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
+# The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
+# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
+# underline=01100000, rev=01010000, blink=01000010,dim=01000001,
+# invis=01000100 and %c is the logical or of desired attributes.
+# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
#
-# Falco Data Products
-# 440 Potrero Avenue
-# Sunnyvale, CA 940864-196
-# Vox: (800)-325-2648
-# Fax: (408)-745-7860
-# Net: techsup@charm.sys.falco.com
+# Update by TD - 2004:
+# Adapted from
+# https://web.archive.org/web/19990922005103/http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt
#
-# Current Falco models as of 1995 are generally ANSI-compatible and support
-# emulations of DEC VT-series, Wyse, and Televideo types.
+# COMMANDS ASCII CODE
#
-
-# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
-# This terminal was released around 1983 and was discontinued long ago.
-# The standout and underline highlights are the same.
-falco|ts1|ts-1|falco ts-1,
- OTbs, am,
- cols#80, it#8, lines#24,
- bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
- ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
- kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
- smir=\Eq, smso=\Eg1, smul=\Eg1,
-falco-p|ts1p|ts-1p|falco ts-1 with paging option,
- OTbs, am, da, db, mir, msgr, ul,
+# Address, Absolute ESC,=,row,column
+# Beep BEL
+# Aux Port Enable ESC,@
+# Aux Port Disable ESC,A
+# Backspace BS
+# Cursor back BS
+# Cursor down LF
+# Cursor forward FF
+# Cursor home RS
+# Cursor up VT
+# Cursor suppress ETB
+# Cursor enable CAN
+# Erase to end of line ESC,T
+# Erase to end of page ESC,Y
+# Erase screen SUB
+# Keyboard lock SI
+# Keyboard unlock SO
+# Read current cursor position ESC,?
+# Set Attribute ESC,0,x (see below for values of x)
+# Tag bit reset ESC,(
+# Tag bit set ESC,)
+# Transparent Print on ESC,3
+# Transparent Print off ESC,4
+#
+#
+# ATTRIBUTES
+#
+# Normal @ 0100
+# Half Intensity A 0101
+# Blinking B 0102
+# Half Intensity Blinking C 0103
+# Reverse Video P 0120
+# Reverse Video Half Intensity Q 0121
+# Reverse Video Blinking R 0122
+# Reverse Video Half Intensity
+# Blinking S 0123
+# Underlined ` 0140
+# Underlined Half Intensity a 0141
+# Underlined Blinking b 0142
+# Underlined Half Intensity
+# Blinking c 0143
+# Video suppress D 0104
+vp3a+|viewpoint3a+|adds viewpoint 3a+,
+ am, bw,
cols#80, it#8, lines#24,
- bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
- cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
- dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
- il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
- rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
- smso=\Eg4, smul=\Eg1,
-# (ts100: I added <rmam>/<smam> based on the init string -- esr)
-ts100|ts100-sp|falco ts100-sp,
- am, mir, msgr, xenl, xon,
- cols#80, it#8, lines#24, vt#3,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
- clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C$<2>,
- cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
- cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
- el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
- ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
- kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
- rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
- sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
- smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
- use=vt100+fnkeys,
-ts100-ctxt|falco ts-100 saving context,
- rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
-
-#### Florida Computer Graphics
+ blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=\r,
+ cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
+ ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=\n, invis=\E0D\E),
+ kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
+ nel=\r\n, rev=\E0P\E), rmso=\E(,
+ sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;
+ %?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t
+ %{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
+ sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
+vp60|viewpoint60|addsvp60|adds viewpoint60,
+ use=regent40,
#
+# adds viewpoint 90 - from cornell
+# Note: emacs sends ei occasionally to insure the terminal is out of
+# insert mode. This unfortunately puts the viewpoint90 IN insert
+# mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
+# - :ei=:im=: must be present in the termcap translation.)
+# - <xhp> indicates glitch that attributes stick to location
+# - <msgr> means it's safe to move in standout mode
+# - <clear=\EG\Ek>: clears screen and visual attributes without affecting
+# the status line
+# Function key and label capabilities merged in from SCO.
+vp90|viewpoint90|adds viewpoint 90,
+ OTbs, bw, msgr, xhp,
+ cols#80, lines#24,
+ clear=\EG\Ek, cub1=^H, cud1=\n, cuf1=^F,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
+ dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
+ ich1=\EF \EF\025, ind=\n, kbs=^H, kcub1=^U, kcud1=\n,
+ kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
+ kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
+ kf7=^B8\r, kf8=^B9\r, kf9=\002\:\r, khome=^A, lf0=F1, lf1=F2,
+ lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
+ lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
+ sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
+# Note: if return acts weird on a980, check internal switch #2
+# on the top chip on the CONTROL pc board.
+adds980|a980|adds consul 980,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<1>\013@, cr=\r, cub1=^H, cud1=\n,
+ cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
+ dl1=\E\017$<13>, il1=\E\016$<13>, ind=\n, kf0=\E0, kf1=\E1,
+ kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
+ kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
-# Florida Computer Graphics Beacon System, using terminal emulator program
-# "host.com", as provided by FCG. This description is for an early release
-# of the "host" program. Known bug: <ed> clears the whole screen, so it's
-# commented out.
-
-# From: David Bryant <cbosg!djb> 1/7/83
-beacon|FCG Beacon System,
- am, da, db,
- cols#80, lines#32,
- bel=\ESTART\r\E37\r\EEND\r$<1>,
- blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
- cub1=^H, cud1=^J, cuf1=\EV,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
- dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
- ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
- rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
- rmul=\ESTART\r\E60\,0\r\EEND\r,
- sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
- smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
- smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
- smul=\ESTART\r\E60\,1\r\EEND\r,
-
-#### Fluke
+#### C. Itoh Electronics
+#
+# As of 1995 these people no longer make terminals (they're still in the
+# printer business). Their terminals were all clones of the DEC VT series.
+# They're located in Orange County, CA.
#
-# The f1720a differences from ANSI: no auto margin, destructive
-# tabs, # of lines, funny highlighting and underlining
-f1720|f1720a|fluke 1720A,
- xt,
- cols#80, lines#16, xmc#1,
- bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
- el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
- kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
- smso=\E[7m, smul=\E[4m,
+# CIT 80 - vt-52 emulator, the termcap has been modified to remove
+# the delay times and do an auto tab set rather than the indirect
+# file used in vt100.
+cit80|cit-80|citoh 80,
+ OTbs, am,
+ cols#80, lines#24,
+ clear=\E[H\EJ, cr=\r, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
+ ind=\n, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
+# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
+# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
+cit101|citc|C.itoh fast vt100,
+ OTbs, am, xenl,
+ cols#80, lines#24,
+ bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
+ flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
+ smul=\E[4m,
+# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
+# The following termcap entry was created from the Callan cd100 entry. The
+# last two lines (with the capabilities in caps) are used by RM-cobol to allow
+# full selection of combinations of reverse video, underline, and blink.
+# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
+# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
+# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
+cit101e|C. Itoh CIT-101e,
+ OTbs, OTpt, am, mir, msgr,
+ cols#80, it#8, lines#24,
+ acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
+ cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
+ cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
+ kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
+ rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
+ smkx=\E=, smso=\E[7m, smul=\E[4m,
+# From: David S. Lawyer, June 1997:
+# The CIT 101-e was made in Japan in 1983-4 and imported by CIE
+# Terminals in Irvine, CA. It was part of CITOH Electronics. In the
+# late 1980's CIT Terminals went out of business.
+# There is no need to use the initialization string is=... (by invoking
+# tset or setterm etc.) provided that the terminal has been manually set
+# up (and the setup saved with ^S) to be compatible with this termcap. To be
+# compatible it should be in ANSI mode (not VT52). A set-up that
+# works is to set all the manually settable stuff to factory defaults
+# by pressing ^D in set-up mode. Then increase the brightness with the
+# up-arrow key since the factory default will likely be dim on an old
+# terminal. Then change any options you want (provided that they are
+# compatible with the termcap). For my terminal I set: Screen
+# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
+# on. I also set up mine for parity (but you may not need it). Then
+# save the setup with ^S.
+# (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
+cit101e-rv|Citoh CIT-101e (sets reverse video),
+ am, eo, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24,
+ OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(
+ B\E[m\E[20l\E[1;24r\E[24;1H,
+ kbs=^?, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
+ rev=\E[7m, ri=\EM, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+ rs1=\Ec\E[?7h\E[>5g, sc=\E7, sgr0=\E[m,
+ smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, smso=\E[7m,
+ smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
+ u8=\E[?6c, u9=\E[c, use=ecma+index,
+cit101e-n|CIT-101e w/o am,
+ am@,
+ cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
+ use=cit101e,
+cit101e-132|CIT-101e with 132 cols,
+ cols#132,
+ kbs=^H, kcub1=^H, kcud1=\n, use=cit101e,
+cit101e-n132|CIT-101e with 132 cols w/o am,
+ am@,
+ cols#132,
+ cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=\n,
+ use=cit101e,
+# CIE Terminals CIT-500 from BRL
+# The following SET-UP modes are assumed for normal operation:
+# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
+# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
+# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
+# Other SET-UP modes may be set for operator convenience or communication
+# requirements.
+# Hardware tabs are assumed to be set every 8 columns; they can be set up
+# by the "reset", "tset", or "tabs" utilities. No delays are specified; use
+# "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (cit500: I added <rmam>/<smam> based on the init string -- esr)
+cit500|CIE Terminals CIT-500,
+ OTbs, OTpt, mir, msgr, xon,
+ OTkn#10, cols#80, it#8, lines#64, vt#3,
+ acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ clear=\E[H\E[J, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
+ il1=\E[L, ind=\n, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
+ ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
+ kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
+ khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
+ lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
+ lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
+ ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
+ rmso=\E[m, rmul=\E[m,
+ rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
+ sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
-#### Liberty Electronics (Freedom)
+# C. Itoh printers begin here
+citoh|ci8510|8510|c.itoh 8510a,
+ cols#80, it#8,
+ bold=\E!, cub1@,
+ is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
+ rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
+ smul=\EX, use=lpr,
+citoh-pica|citoh in pica,
+ is1=\EN, use=citoh,
+citoh-elite|citoh in elite,
+ cols#96,
+ is1=\EE,
+ is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
+ .,
+ use=citoh,
+citoh-comp|citoh in compressed,
+ cols#136,
+ is1=\EQ,
+ is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089
+ \,097\,105\,113\,121\,129.,
+ use=citoh,
+# citoh has infinite cols because we don't want lp ever inserting \n\t**.
+citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
+ cols#0x7fff,
+ is1=\EP, use=citoh,
+citoh-6lpi|citoh in 6 lines per inch mode,
+ is3=\EA, use=citoh,
+citoh-8lpi|citoh in 8 lines per inch mode,
+ lines#88,
+ is3=\EB, use=citoh,
+
+#### Control Data (cdc)
#
-# Liberty Electronics
-# 48089 Fremont Blvd
-# Fremont CA 94538
-# Vox: (510)-623-6000
-# Fax: (510)-623-7021
-# From: <faletti@berkeley.edu>
-# (f100: added empty <acsc> to suppress a tic warning;
-# made this relative to adm+sgr -- note that <invis> isn't
-# known to work for f100 but does on the f110. --esr)
-f100|freedom|freedom100|freedom model 100,
- OTbs, am, bw, hs, mir, msgr, xon,
+cdc456|cdc 456 terminal,
+ OTbs, am,
cols#80, lines#24,
- acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
- cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
- flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
- ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
- is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
- kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
- kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
- kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
- smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
- vpa=\E[%p1%{32}%+%c, use=adm+sgr,
-f100-rv|freedom-rv|freedom 100 in reverse video,
- flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
-# The f110 and f200 have problems with vi(1). They use the ^V
-# code for the down cursor key. When kcud1 is defined in terminfo
-# as ^V, the Control Character Quoting capability (^V in insert mode)
-# is lost! It cannot be remapped in vi because it is necessary to enter
-# a ^V to to quote the ^V that is being remapped!!!
-#
-# f110/f200 users will have to decide whether
-# to lose the down cursor key or the quoting capability. We will opt
-# initially for leaving the quoting capability out, since use of VI
-# is not generally applicable to most interactive applications
-# (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
-f110|freedom110|Liberty Freedom 110,
- bw@, eslok,
- it#8, wsl#80,
- blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
- dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
- ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
- kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
- ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
- smso=\EG<, tsl=\Ef, use=f100,
-f110-14|Liberty Freedom 110 14inch,
- dch1@, use=f110,
-f110-w|Liberty Freedom 110 - 132 cols,
- cols#132, use=f110,
-f110-14w|Liberty Freedom 110 14in/132 cols,
- cols#132,
- dch1@, use=f110,
-# (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
-f200|freedom200|Liberty Freedom 200,
- OTbs, am, eslok, hs, mir, msgr, xon,
- cols#80, it#8, lines#24, wsl#80,
- acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
- clear=^Z, cnorm=\E.1, cr=^M,
- csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
- cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
- flash=\Eo$<200/>\En, fsl=^M, home=^^,
- hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
- kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
- kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
- kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
- kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
- ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
- tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
-f200-w|Liberty Freedom 200 - 132 cols,
- cols#132, use=f200,
-# The f200 has the ability to reprogram the down cursor key. The key is
-# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
-# so powering the terminal off and on will not cause the change to be lost.
-f200vi|Liberty Freedom 200 for vi,
- flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
-f200vi-w|Liberty Freedom 200 - 132 cols for vi,
- cols#132, use=f200vi,
+ bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
+ el=^V, home=^Y, il1=\EL, ind=\n,
-#### GraphOn (go)
+# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
+cdc721|CDC Viking,
+ OTbs, am,
+ cols#80, lines#24,
+ clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
+ cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
+ kcuu1=^W, khome=^Y,
+cdc721ll|CDC Viking with long lines,
+ OTbs, am,
+ cols#132, lines#24,
+ clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
+ cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=\n, kcuf1=^I,
+ kcuu1=^W, khome=^Y,
+# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
+cdc752|CDC 752,
+ OTbs, am, bw, xhp,
+ cols#80, lines#24,
+ bel=^G, clear=\030\E1\s\s, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
+ cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
+ home=\E1\s\s, ind=\n, ll=^Y, rs1=\E1 \030\002\003\017,
+# CDC 756
+# The following switch/key settings are assumed for normal operation:
+# 96 chars SCROLL FULL duplex not BLOCK
+# Other switches may be set according to communication requirements.
+# Insert/delete-character cannot be used, as the whole display is affected.
+# "so" & "se" are commented out until jove handles "sg" correctly.
+cdc756|CDC 756,
+ OTbs, am, bw,
+ OTkn#10, cols#80, lines#24,
+ bel=^G, clear=^Y^X, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
+ cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
+ dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=\n,
+ kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
+ kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
+ kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
+ khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
+ lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
+ rs1=^Y^X^B^C^O,
#
-# Graphon Corporation
-# 544 Division Street
-# Campbell, CA 95008
-# Vox: (408)-370-4080
-# Fax: (408)-370-5047
-# Net: troy@graphon.com (Troy Morrison)
+# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
#
+# Part of the long initialization string defines the "DOWN" key to the left
+# of the tab key to send an ESC. The real ESC key is positioned way out
+# in right field.
#
-# The go140 and go225 have been discontinued. GraphOn now makes X terminals,
-# including one odd hybrid that starts out life on power-up as a character
-# terminal, than can be switched to X graphics mode (driven over the serial
-# line) by an escape sequence. No info on this beast yet.
-# (go140: I added <rmam>/<smam> based on the init string -- esr)
-go140|graphon go-140,
- OTbs,
- cols#80, it#8, lines#24,
- clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
- ed=\E[J$<10/>, el=\E[K, ht=^I,
- if=/usr/share/tabset/vt100, il1=\E[L,
- is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
- kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
- rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
- rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
-go140w|graphon go-140 in 132 column mode,
- am,
- cols#132,
- is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
- use=go140,
-# Hacked up vt200 termcap to handle GO-225/VT220
-# From: <edm@nwnexus.WA.COM>
-# (go225: I added <rmam>/<smam> based on the init string -- esr)
-go225|go-225|Graphon 225,
- OTbs, am, mir, xenl,
- cols#80, it#8, lines#25, vt#3,
- blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
- csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
- ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
- is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
- kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
- rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
- rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
- rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
- sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
- smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
+# The termcap won't work in 132 column mode due to the way it it moves the
+# cursor. Termcap doesn't have the capability (as far as I could tell) to
+# handle the 721 in 132 column mode.
+#
+# (cdc721: changed :ri: to :sr: -- esr)
+cdc721-esc|Control Data 721,
+ OTbs, OTpt, am, bw, msgr, xon,
+ OTkn#10, cols#80, it#8, lines#30,
+ bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
+ cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
+ dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
+ ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
+ is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036
+ \022J\036\022L\036\022N\036\022P\036\022Q\036\022\036
+ \022\^\036\022b\036\022i\036W\s=\036\022Z\036\011C1-`\s`
+ !k/o,
+ kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
+ kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
+ kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
+ ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
+ sgr0=^O^U^]^^E^^^R\\, smir=, smkx=^^^Rk, smso=^^D, smul=^\,
+ tbc=^^^RY,
-#### Harris (Beehive)
+#### Getronics
#
-# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
-# Their terminal group is ancient history now (1995) though the parent
-# company is still in business.
+# Getronics is a Dutch electronics company that at one time was called
+# `Geveke' and made async terminals; but (according to the company itself!)
+# they've lost all their documentation on the command set. The hardware
+# documentation suggests the terminals were actually manufactured by a
+# Taiwanese electronics company named Cal-Comp. There are known
+# to have been at least two models, the 33 and the 50.
#
-# Beehive documentation is undated and marked Preliminary and has no figures
-# so we must have early Superbee2 (Model 600, according to phone conversation
-# with mfr.). It has proved reliable except for some missing padding
-# (notably after \EK and <nl> at bottom of screen).
+# The 50 seems to be a top end vt220 clone, with the addition of a higher
+# screen resolution, a larger screen, at least 1 page of memory above and
+# below the screen, apparently pages of memory right and left of the screen
+# which can be panned, and about 75 function keys (15 function keys x normal,
+# shift, control, func A, func B). It also has more setup possibilities than
+# the vt220. The monitor case is dated November 1978 and the keyboard case is
+# May 1982.
#
-# The key idea is that AEP mode is poison for <cup> & that US's in
-# the local memory should be avoided like the plague. That means
-# that the 2048 character local buffer is used as 25 lines of 80
-# characters, period. No scrolling local memory, folks. It also
-# appears that we cannot use naked INS LINE feature since it uses
-# US. The sbi fakes <il1> with an 80-space insert that may be too
-# slow at low speeds; also spaces get converted to \040 which is
-# too long for some programs (not vi). DEL LINE is ok but slow.
+# The vt100 emulation works as is. The entry below describes the rather
+# non-conformant (but more featureful) ANSI mode.
#
-# The <nl> string is designed for last line of screen ONLY; cup to
-# 25th line corrects the motion inherent in scrolling to Page 1.
+# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
+visa50|geveke visa 50 terminal in ansi 80 character mode,
+ bw, mir, msgr,
+ cols#80, lines#25,
+ acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
+ blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h$<100/>\E[?5l,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n, invis=\E[8m,
+ is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
+ ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
+ kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=^?,
+ kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
+ kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
+ kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
+ lf3=A insert line, lf4=A delete line, lf5=A clear,
+ lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
+ lf9=A funcl0=A send, nel=\r\n, rev=\E[7m, rmacs=\E[3l,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
+ rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
+ smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd,
+
+#### Human Designed Systems (Concept)
#
-# There is one understood bug. It is that the screen appears to
-# pop to a new (blank) page after a <nel>, or leave a half-line
-# ellipsis to a quad that is the extra 48 memory locations. The
-# data received is dumped into memory but not displayed. Not to
-# worry if <cup> is being used; the lines not displayed will be,
-# whenever the cursor is moved up there. Since <cup> is addressed
-# relative to MEMORY of window, nothing is lost; but beware of
-# relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
-# therefore, is setenv MORE -c .
+# Human Designed Systems
+# 400 Fehley Drive
+# King of Prussia, PA 19406
+# Vox: (610)-277-8300
+# Fax: (610)-275-5739
+# Net: support@hds.com
#
-# WARNING: Not all features tested.
+# John Martin <john@hds.com> is their termcap expert. They're mostly out of
+# the character-terminal business now (1995) and making X terminals. In
+# particular, the whole `Concept' line described here was discontinued long
+# ago.
#
-# Timings are assembled from 3 sources. Some timings may reflect
-# SB2/Model 300 that were used if more conservative.
-# Tested on a Model 600 at 1200 and 9600 bd.
+
+# From: <vax135!hpk> Sat Jun 27 07:41:20 1981
+# Extensive changes to c108 by arpavax:eric Feb 1982
+# Some unknown person at SCO then translated it to terminfo.
#
-# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
-# placed on the keyboard and useless because of AEP, is made
-# into a backspace key. In use ESC must be pressed twice (to send)
-# and sending ^C must be prefixed by ESC to avoid that weird
-# transmit mode associated with ENTER key.
+# There seem to be a number of different versions of the C108 PROMS
+# (with bug fixes in its Z-80 program).
#
-# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
-# the screen, then it has dropped into ENTER mode; hit
-# RESET--ONLINE--!tset.
+# The first one that we had would lock out the keyboard of you
+# sent lots of short lines (like /usr/dict/words) at 9600 baud.
+# Try that on your C108 and see if it sends a ^S when you type it.
+# If so, you have an old version of the PROMs.
#
-# As delivered this machine has a FATAL feature that will throw
-# it into that strange transmit state (SPOW) if the space bar is
-# hit after a CR is received, but before receiving a LF (or a
-# few others).
+# You should configure the C108 to send ^S/^Q before running this.
+# It is much faster (at 9600 baud) than the c100 because the delays
+# are not fixed.
+# new status line display entries for c108-8p:
+# <is3> - init str #3 - setup term for status display -
+# set programmer mode, select window 2, define window at last
+# line of memory, set bkgnd stat mesg there, select window 0.
#
-# The circuits MUST be modified to eliminate the SPOW latch.
-# This is done by strapping on chip A46 of the I/O board; cut
-# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
-# chip. This mod has been checked out on a Mod 600 of Superbee II.
-# With this modification absurdly high timings on cr are
-# unnecessary.
+# <tsl> - to status line - select window 2, home cursor, erase to
+# end-of-window, 1/2 bright on, goto(line#0, col#?)
#
-# NOTE WELL that the rear panel switch should be set to CR/LF,
-# not AEP!
+# <fsl> - from status line - 1/2 bright off, select window 0
#
-sb1|beehive superbee,
- OTbs, am, bw, da, db, mir, ul, xsb,
- cols#80, lines#25, xmc#1,
- bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
- cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
- cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
- el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
- il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
- ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
- kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
- kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
- kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
- krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
- rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
- smso=\E_1, smul=\E_0, tbc=\E3,
-sbi|superbee|beehive superbee at Indiana U.,
- xsb,
- cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
- use=sb1,
-# Alternate (older) description of Superbee - f1=escape, f2=^C.
-# Note: there are at least 3 kinds of superbees in the world. The sb1
-# holds onto escapes and botches ^C's. The sb2 is the best of the 3.
-# The sb3 puts garbage on the bottom of the screen when you scroll with
-# the switch in the back set to CRLF instead of AEP. This description
-# is tested on the sb2 but should work on all with either switch setting.
-# The f1/f2 business is for the sb1 and the <xsb> can be taken out for
-# the other two if you want to try to hit that tiny escape key.
-# This description is tricky: being able to use cup depends on there being
-# 2048 bytes of memory and the hairy <nl> string.
-superbee-xsb|beehive super bee,
- am, da, db, xsb,
- cols#80, it#8, lines#25,
- clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
- cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
- dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
- home=\EH, ht=^I, hts=\E1,
- ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
- kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
- kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
- khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
-# This loses on lines > 80 chars long, use at your own risk
-superbeeic|super bee with insert char,
- ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
-sb2|sb3|fixed superbee,
- xsb@, use=superbee,
+# <dsl> - disable status display - set bkgnd status mesg with
+# illegal window #
+#
+# There are probably more function keys that should be added but
+# I don't know what they are.
+#
+# No delays needed on c108 because of ^S/^Q handshaking
+#
+c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
+ is3=\EU\E\sz"\Ev\001\177\s!p\E\s;"\E\sz\s\Ev\s\s\001\177p
+ \Ep\n,
+ rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p,
+c108-4p|concept108-4p|concept 108 w/4 pages,
+ OTbs, eslok, hs, xon,
+ pb@,
+ acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=\r,
+ cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}
+ %>%t\001%{96}%-%;%{32}%+%c,
+ cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
+ ind=\n, is1=\EK\E!\E F,
+ is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
+ rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
+ smcup=\EU\Ev 8p\Ep\r\E\025,
+ tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
+c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
+ rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
+ use=c108-rv-4p,
+c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
+ flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
+ use=c108-4p,
+c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
+ cols#132,
+ is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
+ smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
-#### Beehive Medical Electronics
+# Concept 100:
+# These have only window relative cursor addressing, not screen
+# relative. To get it to work right here, smcup/rmcup (which
+# were invented for the concept) lock you into a one page
+# window for screen style programs.
#
-# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
-# Regarding your question though; Beehive terminals weren't made by Harris.
-# They were made by Beehive Medical Electronics in Utah. They went out of
-# business in the early '80s.
+# To get out of the one page window, we use a clever trick:
+# we set the window size to zero ("\Ev " in rmcup) which the
+# terminal recognizes as an error and resets the window to all
+# of memory.
#
-# (OK, then, I don't know why a couple of these say "harris beehive".)
+# This trick works on c100 but does not on c108, sigh.
#
+# Some tty drivers use cr3 for concept, others use nl3, hence
+# the delays on cr and ind below. This padding is only needed at
+# 9600 baud and up. One or the other is commented out depending on
+# local conventions.
+#
+# 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
+# less than 6 but more than 2 will work.
+#
+# Note: can't use function keys f7-f10 because they are
+# indistinguishable from arrow keys (!), also, del char and
+# clear eol use xon/xoff so they probably won't work very well.
+#
+# Also note that we don't define insrt/del char/delline/eop/send
+# because they don't transmit unless we reset them - I figured
+# it was a bad idea to clobber their definitions.
+#
+# The <mc5> sequence changes the escape character to ^^ so that
+# escapes will be passed through to the printer. Only trouble
+# is that ^^ won't be - ^^ was chosen to be unlikely.
+# Unfortunately, if you're sending raster bits through to be
+# plotted, any character you choose will be likely, so we lose.
+#
+# \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
+# cannot be # in is2 because it will hang a c100 with no printer
+# if sent twice.
+c100|concept100|concept|c104|c100-4p|hds concept 100,
+ OTbs, am, eo, mir, ul, xenl,
+ cols#80, lines#24, pb#9600, vt#8,
+ bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
+ cub1=^H, cud1=\n, cuf1=\E=,
+ cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
+ dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
+ ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
+ ht=\011$<8>, il1=\E\022$<3*>, ind=\n, invis=\EH, ip=$<16*>,
+ is1=\EK,
+ is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E
+ \010A@\s\E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
+ is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
+ kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
+ kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
+ kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
+ khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
+ kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
+ mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
+ rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
+ rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
+ rmso=\Ed, rmul=\Eg, sgr0=\EN@,
+ smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
+ smso=\ED, smul=\EG,
+c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
+ cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
+ smso=\EE, use=c100,
+oc100|oconcept|c100-1p|old 1 page concept 100,
+ in,
+ is3@, use=c100,
-# Reports are that most of these Beehive entries (except superbee) have not
-# been tested and do not work right. <rmso> is a trouble spot. Be warned.
-
-# (bee: <ich1> was empty, which is obviously bogus -- esr)
-beehive|bee|harris beehive,
- OTbs, am, mir,
- cols#80, lines#24,
- cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
- cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
- dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
- kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
- krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
- smir=\EQ, smso=\EdP, smul=\Ed`,
-# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
-# good grief - does this entry make :sg:/:ug: when it doesn't have to?
-# look at those spaces in <rmso>/<smso>. Seems strange to me...
-# (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
-# really care, cook up one using ^F -- esr)
-beehive3|bh3m|beehiveIIIm|harris beehive 3m,
- OTbs, am,
- cols#80, it#8, lines#20,
- bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
- dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
- il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
-beehive4|bh4|beehive 4,
- am,
- cols#80, lines#24,
- bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
- cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
-# There was an early Australian kit-built computer called a "Microbee".
-# It's not clear whether this is for one of those or for a relative
-# of the Beehive.
-microb|microbee|micro bee series,
- OTbs, am,
- cols#80, it#8, lines#24,
- bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
- el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
- kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
- rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
-
-# 8675, 8686, and bee from Cyrus Rahman
-# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
-ha8675|harris 8675,
- is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
- kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
- kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
- kf8=\177, kf9=\Ee, use=bee,
-# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
-# in :is: -- esr)
-ha8686|harris 8686,
- is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
- kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
- kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
- kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
- kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
- use=bee,
-
-#### Hazeltine
+# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
+# Lots of notes, originally inline, but ncurses doesn't grok that.
+#
+# am: not available in power on mode, but turned on with \E[=107;207h in
+# is2=. Also, \E=124l in is2= could have been used to prevent needing
+# to specify xenl:, but that would have rendered the last space on the
+# last line useless.
+# bw: Not available in power on mode, but turned on with \E[=107;207h in
+# is2=.
+# clear: Could be done with \E[2J alone, except that vi (and probably most
+# other programs) assume that this also homes the cursor.
+# dsl: Go to window 2, go to the beginning of the line, use a line feed to
+# scroll the window, and go back to window 1.
+# is2: the string may cause a warning to be issued by tic that it
+# found a very long line and that it suspects that a comma is missing
+# somewhere. This warning can be ignored (unless it comes up more than
+# once). The initialization string contains the following commands:
+#
+# [Setup mode items changed from factory defaults:]
+# \E)0 set alternate character set to
+# graphics
+# ^O set character set to default
+# [In case it wasn't]
+# \E[m turn off all attributes
+# [In case they weren't off]
+# \E[=107; cursor wrap and
+# 207h character wrap on
+# \E[90;3u set Fkey definitions to "transmit"
+# defaults
+# \E[92;3u set cursor key definitions to
+# "transmit" defaults
+# \E[43;1u set shift F13 to transmit...
+# \177\E$P\177
+# \E[44;1u set shift F14 to transmit...
+# \177\E$Q\177
+# \E[45;1u set shift F15 to transmit...
+# \177\E$R\177
+# \E[46;1u set shift F16 to transmit...
+# \177\E$S\177
+# \E[200;1u set shift up to transmit...
+# \177\E$A\177
+# \E[201;1u set shift down to transmit...
+# \177\E$B\177
+# \E[202;1u set shift right to transmit...
+# \177\E$C\177
+# \E[203;1u set shift left to transmit...
+# \177\E$D\177
+# \E[204;1u set shift home to transmit...
+# \177\E$H\177
+# \E[212;1u set backtab to transmit...
+# \177\E$I\177
+# \E[213;1u set shift backspace to transmit...
+# \177\E$^H\177
+# \E[214;1u set shift del to transmit...
+# "\E$\177"
+# [Necessary items not mentioned in setup mode:]
+# \E[2!w move to window 2
+# \E[25;25w define window as line 25 of memory
+# \E[!w move to window 1
+# \E[2*w show current line of window 2 as
+# status line
+# \E[2+x set meta key to use high bit
+# \E[;3+} move underline to bottom of character
+#
+# All Fkeys are set to their default transmit definitions with \E[90;3u
+# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
+# setting MUST be redefined or deactivated, because the default is
+# contained in almost all of this terminal's Fkey strings! If for some
+# reason "quit" cannot be altered, the Fkeys can, but it would be
+# necessary to change ^| to ^] in all of these definitions, and add
+# \E[2;029!t to is2.
+# lines: is set to 24 because this terminal refuses to treat the 25th
+# line normally.
+# ll: Not available in power on mode, but turned on with \E[=107;207h in
+# is2=.
+# lm: Pointless, given that this definition locks a single screen of
+# memory into view, but what the hey...
+# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
+# other attributes alone), but some programs expect this to turn off
+# everything.
+# rmul: Could use \E[4!{ to turn off only underline (leaving any other
+# attributes alone), but some programs expect this to turn off
+# everything.
+# sgr: Attributes are set on this terminal with the string \E[ followed by
+# a list of attribute code numbers (in decimal, separated by
+# semicolons), followed by the character m. The attribute code
+# numbers are:
+# 1 for bold;
+# 2 for dim (which is ignored in power on mode);
+# 4 for underline;
+# 5 for blinking;
+# 7 for inverse;
+# 8 for not displayable; and
+# =99 for protected (except that there are strange side
+# effects to protected characters which make them inadvisable).
+# The mapping of terminfo parameters to attributes is as follows:
+# %p1 (standout) = bold and inverse together;
+# %p2 (underline) = underline;
+# %p3 (reverse) = inverse;
+# %p4 (blink) = blinking;
+# %p5 (dim) is ignored;
+# %p6 (bold) = bold;
+# %p7 (invisible) = not displayable;
+# %p8 (protected) is ignored; and
+# %p9 (alt char set) = alt char set.
+# The code to do this is:
+# \E[0 OUTPUT \E[0
+# %?%p1%p6%O IF (standout; bold) OR
+# %t;1 THEN OUTPUT ;1
+# %; ENDIF
+# %?%p2 IF underline
+# %t;4 THEN OUTPUT ;4
+# %; ENDIF
+# %?%p4 IF blink
+# %t;5 THEN OUTPUT ;5
+# %; ENDIF
+# %?%p1%p3%O IF (standout; reverse) OR
+# %t;7 THEN OUTPUT ;7
+# %; ENDIF
+# %?%p7 IF invisible
+# %t;8 THEN OUTPUT ;8
+# %; ENDIF
+# m OUTPUT m
+# %?%p9 IF altcharset
+# %t^N THEN OUTPUT ^N
+# %e^O ELSE OUTPUT ^O
+# %; ENDIF
+# sgr0: Everything is turned off (including alternate character set), since
+# there is no way of knowing what it is that the program wants turned
+# off.
+# smul: The "underline" attribute is reconfigurable to an overline or
+# strike-through, or (as done with \E[;3+} in is2=), to a line at the true
+# bottom of the character cell. This was done to allow for more readable
+# underlined characters, and to be able to distinguish between an
+# underlined space, an underscore, and an underlined underscore.
+# xenl: Terminal can be configured to not need this, but this "glitch"
+# behavior is actually preferable with autowrap terminals.
#
-# Hazeltine appears to be out of the terminal business as of 1995. These
-# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
-# Harris. They have a hazeltine.com domain (but no web page there ) and can
-# be reached at:
+# Parameters kf31= thru kf53= actually contain the strings sent by the shifted
+# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
+# string modifies the 'O' in kf43 to kf46 to a '$'.
#
-# Hazeltine
-# 450 East Pulaski Road
-# Greenlawn, New York 11740
+# kcbt was originally ^I but redefined in is2=.
+# kHOM was \E[H originally but redefined in is2=, as were a number of
+# other keys.
+# kDC was originally \177 but redefined in is2=.
#
-# As late as 1993, manuals for the terminal product line could still be
-# purchased from:
+# kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
+# tsl: Go to window 2, then do an hpa=.
#
-# TRW Customer Service Division
-# 15 Law Drive
-# P.O. Box 2076
-# Fairfield, NJ 07007-2078
+#------- flash=\E[8;3!}^G\E[3;3!}
+#------- flash=\E[?5h$<100>\E[?5l
+# There are two ways to flash the screen, both of which have their drawbacks.
+# The first is to set the bell mode to video, transmit a bell character, and
+# set the bell mode back - but to what? There is no way of knowing what the
+# user's old bell setting was before we messed with it. Worse, the command to
+# set the bell mode also sets the key click volume, and there is no way to say
+# "leave that alone", or to know what it's set to, either.
+# The second way to do a flash is to set the screen to inverse video, pad for a
+# tenth of a second, and set it back - but like before, there's no way to know
+# that the screen wasn't ALREADY in inverse video, or that the user may prefer
+# it that way. The point is moot anyway, since vi (and probably other
+# programs) assume that by defining flash=, you want the computer to use it
+# INSTEAD of bel=, rather than as a secondary type of signal.
#
-# They're now (1998) a subsidiary of General Electric, operating under the
-# marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
-# at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
+#------- cvvis=\E[+{
+# The is the power on setting, which is also as visible as the cursor
+# gets.
+#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
+# Windowing is possible, but not defined here because it is also used to
+# emulate status line functions. Allowing a program to set a window could
+# clobber the status line or render it unusable. There is additional memory,
+# but screen scroll functions are destructive and do not make use of it.
#
-
-# Since <cuf1> is blank, when you want to erase something you
-# are out of luck. You will have to do ^L's a lot to
-# redraw the screen. h1000 is untested. It doesn't work in
-# vi - this terminal is too dumb for even vi. (The code is
-# there but it isn't debugged for this case.)
-hz1000|hazeltine 1000,
- OTbs,
- cols#80, lines#12,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
- ind=^J,
-# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
-hz1420|hazeltine 1420,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
- cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
- ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
- smso=\E^_,
-# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
-# freakout with out-of-range args and tn3270. No hz since it needs to
-# receive tildes.
-hz1500|hazeltine 1500,
- OTbs, am, hz,
- cols#80, lines#24,
- bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
- cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
- cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
- il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
- kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
-# h1510 assumed to be in sane escape mode. Else use h1500.
-# (h1510: early versions of this entry apparently had "<rmso=\E^_>,
-# <smso=\E^Y>, but these caps were commented out in 8.3; also,
-# removed incorrect and overridden ":do=^J:" -- esr)
-hz1510|hazeltine 1510,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
- cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
- el=\E^O, il1=\E^Z, ind=^J,
-# Hazeltine 1520
-# The following switch settings are assumed for normal operation:
-# FULL CR U/L_CASE ESCAPE
-# FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
-# Other switches may be set for operator convenience or communication
-# requirements.
-hz1520|Hazeltine 1520,
- OTbs, am, bw, msgr,
- cols#80, lines#24,
- bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
- cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
- ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
- kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
- kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
- rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
-# This version works with the escape switch off
-# (h1520: removed incorrect and overridden ":do=^J:" -- esr)
-hz1520-noesc|hazeltine 1520,
- am, hz,
- cols#80, lines#24,
- bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
- cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
- home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
-# Note: the h1552 appears to be the first Hazeltine terminal which
-# is not braindamaged. It has tildes and backprimes and everything!
-# Be sure the auto lf/cr switch is set to cr.
-hz1552|hazeltine 1552,
- OTbs,
- cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
- lf2=red, lf3=green, use=vt52,
-hz1552-rv|hazeltine 1552 reverse video,
- cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
-# Note: h2000 won't work well because of a clash between upper case and ~'s.
-hz2000|hazeltine 2000,
- OTbs, OTnc, am,
- cols#74, lines#27,
- bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
- cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
- il1=~\032$<6>, ind=^J, pad=\177,
-# Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
-# I tested this termcap entry for the Hazeltine Esprit with vi. It seems
-# to work ok. There is one problem though if one types a lot of garbage
-# characters very fast vi seems not able to keep up and hangs while trying
-# to insert. That's in insert mode while trying to insert in the middle of
-# a line. It might be because the Esprit doesn't have insert char and delete
-# char as a built in function. Vi has to delete to end of line and then
-# redraw the rest of the line.
-esprit|Hazeltine Esprit I,
- OTbs, am, bw,
- cols#80, lines#24,
- bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
- cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
- ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
- kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
- kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
- kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
- lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
- rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
-esprit-am|hazeltine esprit auto-margin,
- am, use=esprit,
-# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
-# Vi it seems always wants to send a control J for "do" and it turned out
-# that the terminal would work somewhat if the auto LF/CR was turned off.
-# (hmod1: removed :dn=~^K: -- esr)
-hmod1|Hazeltine Modular 1,
- OTbs, am, hz,
- cols#80, lines#24,
- bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
- cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
- ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
- rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
+#------- dim= Not available in power on mode.
+# You have a choice of defining low intensity characters as "half bright" and
+# high intensity as "normal", or defining low as "normal" and high as "bold".
+# No matter which you choose, only one of either "half bright" or "bold" is
+# available at any time, so taking the time to override the default is
+# pointless.
#
-# Hazeltine Executive 80 Model 30 (1554?)
-# from Will Martin <control@ALMSA-1.ARPA> via BRL
-# Like VT100, except for different "am" behavior.
-hazel|exec80|h80|he80|Hazeltine Executive 80,
- OTbs, OTpt, am,
- cols#80, it#8, lines#24, vt#3,
- OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
- clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
- cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
- ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
- is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
- kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
- kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
- rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
- rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
- rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
- smul=\E[4m$<2/>,
+#------- prot=\E[=0;99m
+# Not defined, because it appears to have some strange side effects.
+#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
+#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
+#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
+# Available, but making them available to programs is inadvisable.
+# The code to do this is:
+# %?%p1%{24}%< IF ((key; 24) <;
+# %p1%{30}%> ((key; 30) >;
+# %p1%{54}%< (key; 54) <
+# %A ) AND
+# %O ) OR
+# [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
+# %t\E[ THEN OUTPUT \E[
+# %p1%d OUTPUT (key) as decimal
+# [next line applies to pfx only]
+# ;1 OUTPUT ;1
+# u OUTPUT u
+# \177 OUTPUT \177
+# %p2%s OUTPUT (string) as string
+# \177 OUTPUT \177
+# [DEL chosen as delimiter, but could be any character]
+# [implied: ELSE do nothing]
+# %; ENDIF
+#
+#------- rs2=
+# Not defined since anything it might do could be done faster and easier with
+# either Meta-Shift-Reset or the main power switch.
+#
+#------- smkx=\E[1!z
+#------- rmkx=\E[!z
+# These sequences apply to the cursor and setup keys only, not to the
+# numeric keypad. But it doesn't matter anyway, since making these
+# available to programs is inadvisable.
+# For the key definitions below, all sequences beginning with \E$ are
+# custom and programmed into the terminal via is2. \E$ also has no
+# meaning to any other terminal.
+#
+#------- cmdch=\E[;%p1%d!t
+# Available, but making it available to programs is inadvisable.
+#------- smxon=\E[1*q
+# Available, but making it available to programs is inadvisable.
+# Terminal will send XON/XOFF on buffer overflow.
+#------- rmxon=\E[*q
+# Available, but making it available to programs is inadvisable.
+# Terminal will not notify on buffer overflow.
+#------- smm=\E[2+x
+#------- rmm=\E[+x
+# Available, but making them available to programs is inadvisable.
+#
+# Printing:
+# It's not made clear in the manuals, but based on other ansi/vt type
+# terminals, it's a good guess that this terminal is capable of both
+# "transparent print" (which doesn't copy data to the screen, and
+# therefore needs mc5i: specified to say so) and "auxiliary print"
+# (which does duplicate printed data on the screen, in which case mc4=
+# and mc5= should use the \E[?4i and \E[?5i strings instead).
+
+hds200|Human Designed Systems HDS200,
+ am, bw, eslok, hs, km, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, lm#0,
+ acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+ blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
+ clear=\E[H\E[J, cnorm=\E[+{, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
+ fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ invis=\E[0;8m,
+ is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P
+ \177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u
+ \177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177
+ \E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177
+ \E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[
+ 214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
+ kDC=\E$^?, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
+ kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=^?, kent=\r, kf1=^\001\r, kf10=^\010\r, kf11=^\011\r,
+ kf12=^\012\r, kf13=\EOP, kf14=\EOQ, kf15=\EOR, kf16=\EOS,
+ kf17=^\017\r, kf18=^\018\r, kf19=^\019\r, kf2=^\002\r,
+ kf20=^\020\r, kf21=^\021\r, kf22=^\022\r, kf23=^\023\r,
+ kf3=^\003\r, kf31=^\031\r, kf32=^\032\r, kf33=^\033\r,
+ kf34=^\034\r, kf35=^\035\r, kf36=^\036\r, kf37=^\037\r,
+ kf38=^\038\r, kf39=^\039\r, kf4=^\004\r, kf40=^\040\r,
+ kf41=^\041\r, kf42=^\042\r, kf43=\E$P, kf44=\E$Q,
+ kf45=\E$R, kf46=\E$S, kf47=^\047\r, kf48=^\048\r,
+ kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, kf51=^\051\r,
+ kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, kf7=^\007\r,
+ kf8=^\008\r, kf9=^\009\r, khome=\E[H, kind=\E[T, knp=\E[U,
+ kpp=\E[V, kri=\E[S, ll=\E[H\E[A, nel=\E[E, rc=\E8,
+ rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
+ rmul=\E[m\017, sc=\E7,
+ sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7
+ %;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
+ smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
+ vpa=\E[%i%p1%dd, use=ansi+pp,
+
+# <ht> through <el> included to specify padding needed in raw mode.
+# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
+avt-ns|concept avt no status line,
+ OTbs, am, eo, mir, ul, xenl, xon,
+ cols#80, it#8, lines#24, lm#192,
+ acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
+ dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
+ hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
+ invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
+ is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1
+ \E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;
+ 27!t,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E\002\r, ked=\E\004\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, khome=\E[H, kich1=\E\001\r, kil1=\E\003\r,
+ ll=\E[24H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
+ pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
+ prot=\E[99m, rc=\E8, rev=\E[7m, ri=\EM$<4>, rmacs=\016$<1>,
+ rmcup=\E[w\E2\r\n, rmir=\E[4l, rmkx=\E[!z\E[0;2u,
+ rmso=\E[7!{, rmul=\E[4!{, sc=\E7,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
+ %;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e
+ \016%;$<1>,
+ sgr0=\E[m\016$<1>, smacs=\017$<1>,
+ smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
+ smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
+avt-rv-ns|concept avt in reverse video mode/no status line,
+ flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
+ use=avt-ns,
+avt-w-ns|concept avt in 132 column mode/no status line,
+ is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
+ use=avt-ns,
+avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
+ flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
+ smcup=\E[H\E[1;24;1;132w, use=avt-ns,
-#### IBM
+# Concept AVT with status line. We get the status line using the
+# "Background status line" feature of the terminal. We swipe the
+# first line of memory in window 2 for the status line, keeping
+# 191 lines of memory and 24 screen lines for regular use.
+# The first line is used instead of the last so that this works
+# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
+# assumes an 8 page AVT but lm isn't currently used anywhere.)
#
+avt+s|concept avt status line changes,
+ eslok, hs,
+ lm#191,
+ dsl=\E[0*w, fsl=\E[1;1!w,
+ is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
+ rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
+ tsl=\E[2;1!w\E[;%p1%dH\E[2K,
+avt|avt-s|concept-avt|avt w/80 columns,
+ use=avt+s, use=avt-ns,
+avt-rv|avt-rv-s|avt reverse video w/sl,
+ flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
+ use=avt+s, use=avt-ns,
+avt-w|avt-w-s|concept avt 132 cols+status,
+ is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
+ use=avt+s, use=avt-ns,
+avt-w-rv|avt-w-rv-s|avt wide+status+rv,
+ flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
+ smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
-ibm327x|line mode IBM 3270 style,
- gn,
- clear=^M^J, el=^M, home=^M,
-
-ibm3101|i3101|IBM 3101-10,
- OTbs, am, xon,
- cols#80, lines#24,
- bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
- el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
-ibm3151|IBM 3151 display,
- is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
- sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
- sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
-# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
-# removed kend, knp, kpp -TD
-ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
- OTbs, am, mir, msgr,
- cols#80, it#8, lines#24,
- acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
- bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
- cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
- invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
- kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
- kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
- kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
- kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
- kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
- kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
- kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
- kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
- ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
- rmso=\E4@, rmul=\E4@,
- sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
- sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
-
-ibm3161-C|IBM 3161-C NLS terminal using cartridge,
- rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
-ibm3162|IBM 3162 display,
- blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
- rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
- use=ibm3161-C,
+#### Contel Business Systems.
+#
-# This really should not use setab/setaf, but it is clear that the
-# original terminfo does not toggle red/blue colors as in setb/setf.
-ibm3164|i3164|IBM 3164,
- msgr,
- colors#8, pairs#64,
- op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
- setab=\E4 %p1%{64}%+%c,
- setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
- smcup=\E!9/N\E>B, use=ibm3161,
+# Contel c300 and c320 terminals.
+contel300|contel320|c300|Contel Business Systems C-300 or C-320,
+ am, in, xon,
+ cols#80, lines#24, xmc#1,
+ bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
+ dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
+ el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
+ hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
+ kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
+ kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
+ rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
+# Contel c301 and c321 terminals.
+contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
+ flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
+ use=contel300,
-ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
- am, bw, msgr, xon,
- cols#80, it#8, lines#25,
- acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
- hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
- indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
- kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
- kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
- kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
- kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
- kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
- kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
- kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
- kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
- kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
- kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
- kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
- kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
- krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
- rmso=\E[m, rmul=\E[m, rs2=\Ec,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
- sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+#### Data General (dg)
+#
+# According to James Carlson <carlson@xylogics.com> writing in January 1995,
+# the terminals group at Data General was shut down in 1991; all these
+# terminals have thus been discontinued.
+#
+# DG terminals have function keys that respond to the SHIFT and CTRL keys,
+# e.g., SHIFT-F1 generates a different code from F1. To number the keys
+# sequentially, first the unmodified key codes are listed as F1 through F15.
+# Then their SHIFT versions are listed as F16 through F30, their CTRL versions
+# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
+# F46 through F60. This is done in the private "includes" below whose names
+# start with "dgkeys+".
+#
+# DG terminals generally support 8 bit characters. For each of these terminals
+# two descriptions are supplied:
+# 1) A default description for 8 bits/character communications, which
+# uses the default DG international character set and keyboard codes.
+# 2) A description with suffix "-7b" for 7 bits/character communications.
+# This description must use the NON-DEFAULT native keyboard language.
-ibmaed|IBM Experimental display,
- OTbs, am, eo, msgr,
- cols#80, it#8, lines#52,
- clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
- dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
- il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- rmso=\E0, sgr0=\E0, smso=\E0,
-ibm-apl|apl|IBM apl terminal simulator,
- lines#25, use=dm1520,
-# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
-# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
-ibmmono|IBM workstation monochrome,
- eslok, hs,
- bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
- invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
- kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
- khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
- lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
- sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
- use=ibm3101,
-ibmega|IBM Enhanced Color Display,
- cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
- nel=^M^J, use=ibmmono,
-# This color scheme is assumed in some recent IBM terminal descriptions
-# (green on black, emulated on a 16-color terminal).
-ibm+color|IBM color definitions,
- colors#8, ncv#3, pairs#64,
- op=\E[32m\E[40m,
- setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
- setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
-ibm+16color|IBM aixterm color definitions,
- colors#16, pairs#256,
- setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
- setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
- setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
- setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
-ibm5154|IBM 5154 Color display,
- colors#8, ncv@, pairs#64,
- bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
- use=ibm+color,
-ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
- rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
- use=ibmmono,
-ibmvga-c|IBM VGA display color termcap,
- cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
- nel=^M^J, use=ibmega-c,
-ibmvga|IBM VGA display,
- cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
- nel=^M^J, use=ibmega,
-# ibmapa* and ibmmono entries come from ACIS 4.3 distribution
-rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
- lines#32,
- dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
-ibm6155|IBM 6155 Black & White display,
- blink@, bold@, use=ibm5151,
-# Advanced Monochrome (6153) and Color (6154) Graphics Display:
-ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
- lines#31,
- dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
-ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
- lines#31,
- dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
- use=ibmega-c,
-ibm6154|IBM 6154 Color displays,
- blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
- sgr0=\E[0;10m, use=ibm5154,
-ibm6153|IBM 6153 Black & White display,
- blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
- sgr0=\E[0;10m, use=ibm5151,
-ibm6153-90|IBM 6153 Black & White display,
- cols#90, lines#36,
- blink@, bold@, use=ibm5151,
-ibm6153-40|IBM 6153 Black & White display,
- cols#40, lines#12, use=ibm6153-90,
-ibm8512|ibm8513|IBM color VGA Terminal,
- am, mir, msgr,
- cols#80, it#8, lines#25,
- acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
- clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
- ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
- il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
- kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
- kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
- kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
- rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
- rmir=\E[4l, rmso=\E[m, rmul=\E[m,
- rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
- smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
- smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
- use=ibm8503,
-hft-c|HFT with Color,
- colors#8, pairs#64,
- acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
- use=ibm5151, use=ibm+color,
-hft-c-old|HFT with Color PC850,
- colors#8, pairs#64,
- setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
- use=ibm+color,
-hft-old|AIWS High Function Terminal,
- am, xon,
- cols#80, lines#25,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
- cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
- ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
- kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
- kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
- ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
-ibm-system1|system1|ibm system/1 computer,
- am, xt,
- cols#80, lines#24,
- bel=^G, clear=^Z, cub1=^H, cuf1=^\,
- cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
- ind=^J,
-# lft-pc850 : IBM Low Function Terminal Device
-# lft "supports" underline, bold, and blink in the sense that the lft code
-# sets all the right bits. HOWEVER, depending upon the adapter, these
-# attributes may or may not be supported by the device driver.
-lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
- am, bw, msgr, xon,
- cols#80, it#8, lines#25,
- acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
- cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
- dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
- home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
- il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
- kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
- kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
- kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
- kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
- kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
- kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
- kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
- kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
- kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
- kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
- kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
- kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
- kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
- rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
- sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g,
-ibm5081|hft|IBM Megapel Color display,
- acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
- s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
-ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
- eslok, hs,
- lines#33,
- dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
- use=ibmega-c,
-ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
- use=hft-c,
-ibm8514|IBM 8514/a color VGA display,
- eslok, hs,
- dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
-ibm8514-c|IBM 8514 color display with standout and underline,
- eslok, hs,
- lines#41,
- cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
- kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
- use=ibmega-c,
+# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
+# Ctrl/Shift fdkeys (kf34-kf44).
-#
-# AIX entries. IBM ships these with AIX 3.2.5.
-# -- added rc, sc based on manpage -TD
-# Note that we could use ibm+16color, but that is not how IBM defines this one.
-aixterm|IBM Aixterm Terminal Emulator,
- eslok, hs,
- acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
- fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
- sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
-aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
- eslok, hs,
- acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
- fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
- sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
-aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
- eslok, hs,
- bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
- tsl=\E[?%p1%dT, use=ibm6153,
-jaixterm|IBM Kanji Aixterm Terminal Eemulator,
- acsc@, use=aixterm,
-jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
- acsc@, use=aixterm-m,
+dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
+ ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
+ kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
+ kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
+ kf11=\233011z, kf12=\233012z, kf13=\233013z,
+ kf14=\233014z, kf15=\233000z, kf16=\233101z,
+ kf17=\233102z, kf18=\233103z, kf19=\233104z,
+ kf2=\233002z, kf20=\233105z, kf21=\233106z,
+ kf22=\233107z, kf23=\233108z, kf24=\233109z,
+ kf25=\233110z, kf26=\233111z, kf27=\233112z,
+ kf28=\233113z, kf29=\233114z, kf3=\233003z,
+ kf30=\233100z, kf31=\233201z, kf32=\233202z,
+ kf33=\233203z, kf34=\233204z, kf35=\233205z,
+ kf36=\233206z, kf37=\233207z, kf38=\233208z,
+ kf39=\233209z, kf4=\233004z, kf40=\233210z,
+ kf41=\233211z, kf42=\233212z, kf43=\233213z,
+ kf44=\233214z, kf45=\233200z, kf46=\233301z,
+ kf47=\233302z, kf48=\233303z, kf49=\233304z,
+ kf5=\233005z, kf50=\233305z, kf51=\233306z,
+ kf52=\233307z, kf53=\233308z, kf54=\233309z,
+ kf55=\233310z, kf56=\233311z, kf57=\233312z,
+ kf58=\233313z, kf59=\233314z, kf6=\233006z,
+ kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
+ khome=\233H, kprt=\233i,
-# This flavor is adapted from xterm, in turn from aixterm documentation -TD
-aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
- use=ibm+16color, use=aixterm,
+dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
+ ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
+ kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
+ kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
+ kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
+ kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
+ kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
+ kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
+ kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
+ kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
+ kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
+ kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
+ kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
+ kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
+ kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
+ kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
+ kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
+ kf9=\E[009z, khome=\E[H, kprt=\E[i,
-#### Infoton/General Terminal Corp.
+dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
+ kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
+ kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
+ kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
+ kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
+ kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
+ kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
+ kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
+ kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
+ kf8=^^x, kf9=^^y, khome=^H,
+
+dgkeys+15|Private entry describing 15 DG mode special keys,
+ kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
+ kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
+ kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
+ kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
+ kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
+ kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
+ kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
+ kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
+ kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
+ kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
+ kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
+ kf9=^^y,
+
+# Data General color terminals use the "Tektronix" color model. The total
+# number of colors varies with the terminal model, as does support for
+# attributes used in conjunction with color.
+
+# Removed u7, u8 definitions since they conflict with tack:
+# Preserve user-defined colors in at least some cases.
+# u7=^^Fh,
+# Default is ACM mode.
+# u8=^^F}20^^Fi^^F}21,
#
+dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
+ bce,
+ colors#16, ncv#53, pairs#0x100,
+ op=\036Ad\036Bd,
+ setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
+ %{4}%&%t%{1}%|%;%;%{48}%+%c,
+ setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
+ %{4}%&%t%{1}%|%;%;%{48}%+%c,
+ setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
-# gt100 sounds like something DEC would come out with. Let's hope they don't.
-i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
- OTbs, am,
+dg+fixed|Fixed color info for DG D430C terminals in DG mode,
+ use=dgunix+fixed,
+
+# Video attributes are coordinated using static variables set by "sgr", then
+# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
+# (D=dim, U=underline, B=blink, R=reverse.)
+dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
+ bce,
+ colors#8, ncv#16, pairs#64,
+ op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
+ setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+ setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+ setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
+ %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+ setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;
+ %d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
+
+dg+color|Color info for Data General D470C terminals in ANSI mode,
+ colors#16, ncv#53, pairs#0x100,
+ setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
+ %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
+ ;5%;%?%gR%t;7%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;
+ %?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t
+ ;5%;%?%gR%t;7%;m,
+ setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
+ %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
+ %?%gR%t;7%;m,
+ setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?
+ %p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;
+ %?%gR%t;7%;m,
+ use=dg+color8,
+
+dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
+ bce,
+ colors#8, ncv#16, pairs#64,
+ op=\036Ad\036Bd,
+ setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
+ %;%{48}%+%c,
+ setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|
+ %;%{48}%+%c,
+ setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
+
+dgmode+color|Color info for Data General D470C terminals in DG mode,
+ colors#16, pairs#0x100,
+ setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
+ %{4}%&%t%{1}%|%;%;%{48}%+%c,
+ setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1
+ %{4}%&%t%{1}%|%;%;%{48}%+%c,
+ use=dgmode+color8,
+
+dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
+ bce, ccc,
+ colors#52, ncv#53, pairs#26,
+ initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*
+ %{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*
+ %{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*
+ %{1000}%/%02X,
+ oc=\036RG01A00FF00000000\036RG01B00000000FF00
+ \036RG01C007F00000000\036RG01D000000007F00,
+ op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
+ scp=\036RG2%p1%02X,
+
+# Colors are in the order: normal, reverse, dim, dim + reverse.
+dg+ccc|Configurable color info for DG D430C terminals in DG mode,
+ bce, ccc,
+ colors#52, ncv#53, pairs#26,
+ initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}
+ %*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c
+ %p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m
+ %{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga
+ %{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}
+ %+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}
+ %/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa
+ %ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
+ oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?0
+ 0000000\036RG01=000000007?00,
+ op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
+ scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
+
+# The generic DG terminal type (an 8-bit-clean subset of the 6053)
+# Initialization string 1 sets:
+# ^R - vertical scrolling enabled
+# ^C - blinking enabled
+dg-generic|Generic Data General terminal in DG mode,
+ am, bw, msgr, xon,
cols#80, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
- ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
- ind=^J, rmso=\Ea, smso=\Eb,
-i400|infoton 400,
- OTbs, am,
- cols#80, lines#25,
- bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
- dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
- il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
-# (addrinfo: removed obsolete ":bc=^Z:" -- esr)
-addrinfo,
- am,
+ bel=^G, blink=^N, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
+ cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=\n, is1=^R^C,
+ mc0=^Q, nel=\n, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
+ smul=^T, use=dgkeys+11,
+
+# According to the 4.4BSD termcap file, the dg200 <cup> should be the
+# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
+# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
+# maybe they were originally nuls (which would fit).
+
+dg200|data general dasher 200,
+ OTbs, am, bw,
cols#80, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
- cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
-# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
-infoton,
+ bel=^G, clear=^L, cr=\r, cub1=^Y, cud1=^Z, cuf1=^X,
+ cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=\n,
+ kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
+ kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
+ kf9=^^y, khome=^H, lf0=f10, nel=\n, rmso=^^E, rmul=^U,
+ smso=^^D, smul=^T,
+
+# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
+dg210|dg-ansi|Data General 210/211,
am,
cols#80, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
- ed=^K, ind=^J, ll=^H^\,
+ OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
+ smso=\E[7;m, smul=\E[4;m,
+# From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
+# courtesy of Carlos Rucalde of Vantage Software, Inc.
+# (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
+# I suspect the d200 function keys actually work on the dg211, check it out.)
+dg211|Data General d211,
+ cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
+ kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=\r^Z, rmcup=^L,
+ rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
-# The ICL6402 was actually the Kokusai Display System 6402.
-# The 6404 was the KDS7372 (color version of the 6402).
-#
-# ICL6404 control codes follow:
-#
-#code function
-#~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#ctrl-A set SOM position at cursor position
-#ctrl-G Bell
-#ctrl-H Backspace
-#ctrl-I Horiz tab
-#ctrl-J Linefeed
-#ctrl-K Cursor up
-#ctrl-L Cursor right
-#ctrl-M Carriage return
-#ctrl-N Disable xon/xoff to host
-#ctrl-O Enable xon/xoff to host
-#ctrl-R Enable bidirectional mode
-#ctrl-T Disable bidirectional mode
-#ctrl-V Cursor down
-#ctrl-Z Clear unprotected data to insert char
-#ctrl-^ Cursor home
-#ctrl-_ Newline
-#
-#ESC lead-in char for multiple character command
-#
-#ESC space R execute power on sequence
-#ESC ! p1 p2 define scroll region:
-# p1 = scroll top line: 20h - 37h
-# p1 = scroll bottom line: 20h - 37h
-#ESC " unlock keyboard
-#ESC # lock keyboard
-#ESC $ Semi-graphics mode on
-#ESC % Semi-graphics mode off
-#ESC & protect mode on
-#ESC ' protect mode off
-#ESC ( write protect mode off (full intensity)
-#ESC ) write protect mode on (half intensity)
+# dg450 from Cornell (not official)
+dg450|dg6134|data general 6134,
+ cub1@, cuf1=^X, use=dg200,
+
+# Not official...
+# Note: lesser Dasher terminals will not work with vi because vi insists upon
+# having a command to move straight down from any position on the bottom line
+# and scroll the screen up, or a direct vertical scroll command. The 460 and
+# above have both, the D210/211, for instance, has neither. We must use ANSI
+# mode rather than DG mode because standard UNIX tty drivers assume that ^H is
+# backspace on all terminals. This is not so in DG mode.
+# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
+# grounds that there is no matching ":ml:"
+dg460-ansi|Data General Dasher 460 in ANSI-mode,
+ OTbs, am, msgr, ul,
+ cols#80, it#8, lines#24,
+ OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
+ dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
+ kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
+ kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
+ lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
+ mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
+ sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;
+ %?%p1%p3%|%t;7%;m,
+ sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
+ u7=\E[6n, u8=\E[5n, u9=\E[0n,
+# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
+# Data General 605x
+# Ought to work for a Model 6242, Type D210 as well as a 605x.
+# Note that the cursor-down key transmits ^Z. Job control users, beware!
+# This also matches a posted description of something called a `Dasher 100'
+# so there's a dg100 alias here.
+# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
+dg6053-old|dg100|data general 6053,
+ OTbs, am, bw, ul,
+ cols#80, lines#24,
+ OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=\r, cub1=^Y, cud1=^Z,
+ cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
+ home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
+ kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
+ kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
+ rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
+ smul=^T,
+
+# (Some performance can be gained over the generic DG terminal type)
+dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
+ xon@,
+ home=\020\0\0, ll=^P\0^W, use=dg-generic,
+
+# Like 6053, but adds reverse video and more keypad and function keys.
+d200|d200-dg|Data General DASHER D200,
+ bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
+ sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
+ %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
+ sgr0=^O^U^]^^E, smso=^^D^\, use=dgkeys+15, use=dg6053,
+
+# DASHER D210 series terminals in ANSI mode.
+# Reverse video, no insert/delete character/line, 7 bits/character only.
#
-#ESC * clear screen
-#ESC + clear unprotected data to insert char
-#ESC , clear unprotected data to half intensity spaces
-#ESC - p1 p2 p3 p4 address cursor to page, row, column:
-# p1 = page number 0 - 3
-# p2 = row 20h - 7fh
-# p3 = column (lo) 20h - 7fh
-# p4 = column (hi) 20h - 21h (only 132 col)
-#ESC . p1 set cursor style:
-# p1 = 0 invisible cursor
-# p1 = 1 block blinking cursor
-# p1 = 2 block steady cursor
-# p1 = 3 underline blinking cursor
-# p1 = 4 underline steady cursor
-#ESC / transmit cursor location (page, row, column)
-#ESC 0 p1 p2 p3 p4 program edit key:
-# p1 = edit key code: '@'-'S', '`'-'s'
-# p2 p3 p4 = program data (3 bytes)
+# Initialization string 1 sets:
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <4 - print characters regardless of attributes
+d210|d214|Data General DASHER D210 series,
+ am, bw, msgr, xon,
+ cols#80, lines#24,
+ bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=\r,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
+ el1=\E[1K, home=\E[H, ind=\n, is1=\E[<0;<1;<4l,
+ ll=\E[H\E[A, nel=\n, rev=\E[7m, rmso=\E[m, rmul=\E[m,
+ sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|
+ %p6%|%t7;%;m,
+ sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
+
+# DASHER D210 series terminals in DG mode.
+# Like D200, but adds clear to end-of-screen and needs XON/XOFF.
+d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
+ xon,
+ ed=^^FF, use=d200-dg,
+
+# DASHER D211 series terminals in ANSI mode.
+# Like the D210, but with 8-bit characters and local printer support.
#
-#ESC 1 set tab
-#ESC 2 clear tab at cursor
-#ESC 3 clear all tabs
-#ESC 4 send unprotect line to cursor
-#ESC 5 send unprotect page to cursor
-#ESC 6 send line to cursor
-#ESC 7 send page to cursor
-#ESC 8 n set scroll mode:
-# n = 0 set jump scroll
-# n = 1 set smooth scroll
-#ESC 9 n control display:
-# n = 0 display off
-# n = 1 display on
-#ESC : clear unprotected data to null
-#ESC ; clear unprotected data to insert char
+# Initialization string 2 sets:
+# \E[2;1;1;1v
+# 2;1 - 8 bit operations
+# 1;1 - 8 bit (international) keyboard language
+# \E(B - default primary character set (U.S. ASCII)
+# \E)4 - default secondary character set (international)
+# ^O - primary character set
#
-#ESC < keyclick on
-#ESC = p1 p2 address cursor to row, column
-# p1 = row 20h - 7fh
-# p2 = column (lo) 20h - 7fh
-# p3 = column (hi) 20h - 21h (only 132 col)
-#ESC > keyclick off
-#ESC ? transmit cursor location (row, column)
+d211|d215|Data General DASHER D211 series,
+ km,
+ is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
+ use=d210,
+
+# Initialization string 2 sets:
+# \E[2;0;1;0v
+# 2;0 - 7 bit operations
+# 1;0 - 7 bit (native) keyboard language
+# \E(0 - default character set (the keyboard native language)
+# ^O - primary character set
+d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
+ km@,
+ is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
+
+# Like the D210 series, but adds support for 8-bit characters.
#
-#ESC @ copy print mode on
-#ESC A copy print mode off
-#ESC B block mode on
-#ESC C block mode off (conversation mode)
-#ESC D F set full duplex
-#ESC D H set half duplex
-#ESC E line insert
-#ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
-# 0 = black, 1 = red, 2 = green, 3 = yellow
-# 4 = blue, 5 = magenta, 6 = cyan, 7 = white
-#ESC G n set serial field attribute (n = 30h - 3Fh)
-#ESC H n full graphics mode:
-# n = 0 exit full graphics mode
-# n = 1 enter full graphics mode
-#ESC I back tab
-#ESC J back page
-#ESC K forward page
+# Reset string 2 sets:
+# ^^N - secondary character set
+# ^^FS0> - 8 bit international character set
+# ^^O - primary character set
+# ^^FS00 - default character set (matching the native keyboard language)
#
-#ESC L unformatted page print
-#ESC M L move window left (132 col mode only)
-#ESC M R move window right (132 col mode only)
-#ESC N set page edit (clear line edit)
-#ESC O set line edit (clear page edit)
-#ESC P formatted page print
-#ESC Q character insert
-#ESC R line delete
-#ESC S send message unprotected only
-#ESC T erase line to insert char
-#ESC U set monitor mode (see ESC X, ESC u)
+d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
+ km,
+ rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
+
+d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
+ use=d211-dg,
+
+# Enhanced DG mode with changes to be more UNIX compatible.
+d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
+ mc5i,
+ it#8,
+ acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
+ clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
+ el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=\n,
+ is1=^R^C^^P@1, is3=^^Fz0, kHOM=^^Pf, kLFT=^^Pd, kPRT=^^P1,
+ kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, kcuf1=^^PC,
+ kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, mc0=^^F?9,
+ mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
+ rs2=\036N\036FS0E\036O\036FS00,
+ sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;
+ \036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t1
+ 1%e00%;,
+ sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
+ vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
+d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
+ lines#25,
+ is3=^^Fz2, use=d216+,
+
+d217-unix|Data General DASHER D217 in DG-UNIX mode,
+ use=d216-unix,
+d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
+ use=d216-unix-25,
+
+# DASHER D220 color terminal in ANSI mode.
+# Like the D470C but with fewer colors and screen editing features.
#
-#ESC V n select video attribute mode:
-# n = 0 serial field attribute mode
-# n = 1 parallel character attribute mode
-#ESC V 2 n define line attribute:
-# n = 0 single width single height
-# n = 1 single width double height
-# n = 2 double width single height
-# n = 3 double width double height
-#ESC V 3 n select character font:
-# n = 0 system font
-# n = 1 user defined font
-#ESC V 4 n select screen mode:
-# n = 0 page screen mode
-# n = 1 virtual screen mode
-#ESC V 5 n control mouse mode:
-# n = 0 disable mouse
-# n = 1 enable sample mode
-# n = 2 send mouse information
-# n = 3 enable request mode
-#ESC W character delete
-#ESC X clear monitor mode (see ESC U, ESC u)
-#ESC Y erase page to insert char
+# Initialization string 1 sets:
+# \E[<0;<1;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <4 - print characters regardless of attributes
+# \E[m - all attributes off
+# Reset string 1 sets:
+# \Ec - initial mode defaults (RIS)
#
-#ESC Z n send user/status line:
-# n = 0 send user line
-# n = 1 send status line
-# n = 2 send terminal ID
-#ESC [ p1 p2 p3 set character attribute (parallel char mode):
-# p1: 0 = normal
-# 1 = blank
-# 2 = blink
-# 3 = blink blank (= blank)
-# 4 = reverse
-# 5 = reverse blank
-# 6 = reverse blink
-# 7 = reverse blink blank (= reverse blank)
-# 8 = underline
-# 9 = underline blank
-# : = underline blink
-# ; = underline blink blank
-# < = reverse underline
-# = = reverse underline blank
-# > = reverse underline blink
-# ? = reverse underline blink blank
-# p2, p3: f/grnd, b/grnd colour
-# (see ESC F for colours)
-# use ZZ for mono, eg.
-# ESC [ 0 Z Z for normal
-# ESC [ 4 Z Z for inverse etc.
+d220|Data General DASHER D220,
+ mc5i@,
+ dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
+ use=dg+color8, use=d470c,
+
+d220-7b|Data General DASHER D220 in 7 bit mode,
+ mc5i@,
+ dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
+ use=dg+color8, use=d470c-7b,
+
+# Initialization string 3 sets:
+# - default cursor (solid rectangle)
+# Reset string 2 sets:
+# ^^N - secondary character set
+# ^^FS0> - 8 bit international character set
+# ^^O - primary character set
+# ^^FS00 - default character set (matching the native keyboard language)
#
-#ESC \ n set page size:
-# n = 1 24 lines/page
-# n = 2 48 lines/page
-# n = 3 72 lines/page
-# n = 4 96 lines/page
-#ESC ] n set Wordstar mode:
-# n = 0 normal (KDS7372) mode
-# n = 1 Wordstar mode
+d220-dg|Data General DASHER D220 color terminal in DG mode,
+ mc5i@,
+ dl1@, home@, il1@, is2@, is3=^^FQ2, ll@, mc4@, mc5@, rs1@,
+ rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
+ use=d470c-dg,
+
+# DASHER D230C color terminal in ANSI mode.
+# Like the D220 but with minor ANSI compatibility improvements.
#
-#ESC b set foreground colour screen
+d230c|d230|Data General DASHER D230C,
+ blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=\r\n,
+ rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
+ sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}
+ %;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e
+ %{0}%;%PD50m\E)%?%p9%t6\016%e4\017%;,
+ sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
+ smul=\E[4;50m, use=dgkeys+7b, use=d220,
+
+d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
+ use=d220-dg,
+
+# DASHER D400/D450 series terminals.
+# These add intelligent features like insert/delete to the D200 series.
#
-#ESC c n enter self-test mode:
-# n = 0 exit self test mode
-# n = 1 ROM test
-# n = 2 RAM test
-# n = 3 NVRAM test
-# n = 4 screen display test
-# n = 5 main/printer port test
-# n = 6 mouse port test
-# n = 7 graphics board test
-# n = 8 graphics memory test
-# n = 9 display all 'E'
-# n = : display all 'H'
-#ESC d set background colour screen
+# Initialization string 2 sets:
+# ^^FQ2 - default cursor (solid rectangle)
+# ^^FW - character protection disabled
+# ^^FJ - normal (80 column) mode
+# ^^F\^ - horizontal scrolling enabled (for alignment)
+# ^^FX004? - margins at columns 0 and 79
+# ^^F] - horizontal scrolling disabled
+# ^^O - primary character set
+# ^^FS00 - default character set (the keyboard native language)
+# - (should reset scrolling regions, but that glitches the screen)
+# Reset string 1 sets:
+# ^^FA - all terminal defaults except scroll rate
+# Reset string 2 sets:
+# ^^F] - horizontal scrolling disabled
+# ^^FT0 - jump scrolling
#
-#ESC e n program insert char (n = insert char)
-#ESC f text CR load user status line with 'text'
+d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
+ mc5i,
+ acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=^^FQ0, cnorm=^^FQ2,
+ dch1=^^K, dl1=^^FI, enacs=\036N\036FS11\036O, home=^^FG,
+ hpa=\020%p1%c\177, ich1=^^J, il1=^^FH,
+ is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O
+ \036FS00,
+ ll=^^FG^W, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, rs1=^^FA,
+ rs2=\036F]\036FT0,
+ sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
+ %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
+ sgr0=^O^U^]^^E^^O, smacs=^^N, vpa=\020\177%p1%c,
+ use=d210-dg,
+
+# DASHER D410/D460 series terminals in ANSI mode.
+# These add a large number of intelligent terminal features.
#
-#ESC g display user status line on 25th line
-#ESC h display system status line on 25th line
-#ESC i tab
-#ESC j reverse linefeed
-#ESC k n duplex/local edit mode:
-# n = 0 duplex edit mode
-# n = 1 local edit mode
-#ESC l n select virtual screen:
-# n = 0 screen 1
-# n = 1 screen 2
-#ESC m save current config to NVRAM
-#ESC n p1 select display screen:
-# p1 = 0 screen 1
-# p1 = 1 screen 2
-# p1 = 2 screen 3
-# p1 = 3 screen 4
-#ESC o p1 p2 set characters/line and attribute:
-# p1 = 0 80 chars/line
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[5;0v - normal (80 column) mode
+# \E[1;1;80w - margins at columns 1 and 80
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
#
-#ESC o p1 p2 set characters/line and attribute:
-# p1 = 0 80 chars/line
-# p1 = 1 132 chars/line
-# p2 = 0 single width single height
-# p2 = 1 single width double height
-# p2 = 2 double width single height
-# p2 = 3 double width double height
+# Initialization string 2 sets:
+# \E[3;2;2;1;1;1v
+# 3;2 - default cursor (solid rectangle)
+# 2;1 - 8 bit operations
+# 1;1 - international keyboard language
+# \E(B - default primary character set (U.S. ASCII)
+# \E)4 - default secondary character set (international)
+# ^O - primary character set
#
-#ESC q insert mode on
-#ESC r edit mode on
-#ESC s send message all
-#ESC t erase line to null
-#ESC u clear monitor mode (see ESC U, ESC X)
-#ESC v autopage mode on
-#ESC w autopage mode off
-#ESC x p1 p2 p3 define delimiter code...
-#ESC y erase page to null
+# Reset string 1 sets:
+# \Ec - initial mode defaults (RIS)
+# \E[<2h - horizontal scrolling disabled
#
-#ESC z 2 p1 p2 p3 p4 draw quadrangle:
-# p1 = starting row
-# p2 = starting column
-# p3 = end row
-# p4 = end column
+# Reset string 2 sets:
+# \E[4;0;2;1;1;1v
+# 4;0 - jump scrolling
+# 2;1 - 8 bit operations
+# 1;1 - 8 bit (international) keyboard language
+# \E(B - default primary character set (U.S. ASCII)
+# \E)4 - default secondary character set (international)
#
-#ESC { p1 p2 p3 p4 configure main port
-# (baud, stop bits, parity, word length)
+d410|d411|d460|d461|Data General DASHER D410/D460 series,
+ mc5i,
+ acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
+ cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
+ is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
+ is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
+ ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
+ rs2=\E[4;0;2;1;1;1v\E(B\E)4,
+ sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5
+ %|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
+ sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
+
+# Initialization string 2 sets:
+# \E[3;2;2;0;1;0v
+# 3;2 - default cursor (solid rectangle)
+# 2;0 - 7 bit operations
+# 1;0 - 7 bit (native) keyboard language
+# \E(0 - default character set (the keyboard native language)
+# ^O - primary character set
#
-#ESC | p1 p2 text Ctrl-Y program function key with 'text':
-# p1 = function key code:
-# '1' - ';' normal f1- f11
-# '<' - 'F' shifted f1 - f11
-# p2 = program mode:
-# 1 = FDX
-# 2 = LOC
-# 3 = HDX
-# Ctrl-Y = terminator
-# (use Ctrl-P to escape ^P, ^Y )
+# Reset string 2 sets:
+# \E[4;0;2;0;1;0v
+# 4;0 - jump scrolling
+# 2;0 - 7 bit operations
+# 1;0 - 7 bit (native) keyboard language
+# \E(0 - default character set (the keyboard native language)
#
-#ESC } p1 p2 p3 p4 configure printer port
-# (baud, stop bits, parity, word length)
-#ESC ~ send system status
+d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
+ km@,
+ enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
+ rs2=\E[4;0;2;0;1;0v\E(0,
+ sgr=\E[%?%p1%p5%|%t2;%;%?%p2%p6%|%t4;%;%?%p1%p3%|%p6%|%t7;%;
+ %?%p4%t5;%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
+
+d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
+ km,
+ enacs@, rmacs=\036FS00,
+ sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4
+ %t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e0
+ 0%;,
+ sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
+ use=d400-dg,
+
+# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
#
-# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[5;1v - compressed (135 column) mode
+# \E[1;1;126 - margins at columns 1 and 126
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
#
-# Entry is by esr going solely on above information and is UNTESTED.
-# This actually looks a lot like a Televideo 9xx.
-# This entry uses page 0 and is monochrome; I'm not brave enough to try
-# to make color work without a test terminal. The <am> capability is a guess.
-# The initialization string sets conversation mode, blinking underline cursor,
-# full duplex, parallel attribute mode, display user status line, white
-# foreground, black background, normal highlight.
+# Reset string 1 sets:
+# \Ec - initial mode defaults (RIS)
+# \E[5;1v - compressed (135 column) mode
+# \E[1;1;126w - margins at columns 1 and 126
+# \E[<2h - horizontal scrolling disabled
#
-icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
- OTbs, am, hs,
- cols#80, lines#24,
- bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
- cnorm=\E.3, cr=^M,
- csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
- cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
- hts=\E1, il1=\EE, invis=\E[1ZZ,
- is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
- rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
- rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
- sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?%p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
- sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
-icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
- rs2=\Eo1, use=icl6404,
+d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
+ cols#126,
+ is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
+ rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
+
+d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
+ cols#126,
+ is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
+ rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
+
+d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
+ use=d410-dg,
+
+# These add intelligent features like scrolling regions.
+d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
+ civis=^^FQ0, clear=^^FE, cnorm=^^FQ5,
+ cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
+ home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
+ is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O
+ \036FS00,
+ ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
+ rs1=\036FA\036FT0, rs2=^^P@1, sc=\036F}10,
+ vpa=\036FPFF%p1%2.2X,
+ wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
+ %>%t000%;\036FX%p3%2.2X%p4%2.2X,
+ use=d216+,
+d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
+ cols#132,
+ is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O
+ \036FS00,
+ rs2=\036P@1\036FK\036FX0083,
+ wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2
+ %>%t001%;\036FX%p3%2.2X%p4%2.2X,
+ use=d412-unix,
+d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
+ lines#25,
+ is3=^^Fz2,
+ wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2
+ %>%t000%;\036FX%p3%2.2X%p4%2.2X,
+ use=d462+,
+d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
+ eslok, hs,
+ clear=\036FG\036PH, fsl=\036F}01\022,
+ is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
+ tsl=\036F}00\036FP%p1%2.2X18\036PG,
+ wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2
+ %>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
+ use=d462+,
+
+# Relative cursor motions are confined to the current window,
+# which is not what the scrolling region specification expects.
+# Thus, relative vertical cursor positioning must be deleted.
+d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
+ csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>
+ %t000%;,
+ cud1@, cuu1@, ll@, use=d462+,
+
+d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
+ use=d412-unix,
+d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
+ use=d412-unix-w,
+d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
+ use=d412-unix-25,
+d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
+ use=d412-unix-s,
+d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
+ use=d412-unix-sr,
-#### Interactive Systems Corp
-#
-# ISC used to sell OEMed and customized hardware to support ISC UNIX.
-# ISC UNIX still exists in 1995, but ISC itself is no more; they got
-# bought out by Sun.
-#
+d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
+ use=d413-unix,
+d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
+ use=d413-unix-w,
+d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
+ use=d413-unix-25,
+d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
+ use=d413-unix-s,
+d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
+ use=d413-unix-sr,
-# From: <cithep!eric> Wed Sep 16 08:06:44 1981
-# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
-# ":le=^_:" later overridden -- esr)
-intext|Interactive Systems Corporation modified owl 1200,
- OTbs, am,
- cols#80, it#8, lines#24, xmc#1,
- bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
- cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
- dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
- el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
- kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
- kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
- kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
- rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
- smso=^V$\,,
-intext2|intextii|INTERACTIVE modified owl 1251,
- am, bw, ul,
- cols#80, lines#24, xmc#0,
- bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D,
- cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
- dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
- flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
- hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
- kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
- kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
- kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
- khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
- lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
- lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
- smul=\E[18 D,
+d430c-dg|d430-dg|Data General D430C in DG mode,
+ use=d413-dg, use=dg+fixed,
+d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
+ use=d413-dg, use=dg+ccc,
-#### Kimtron (abm, kt)
-#
-# Kimtron seems to be history, but as March 1998 these people are still
-# offering repair services for Kimtron equipment:
-#
-# Com/Pair Monitor Service
-# 1105 N. Cliff Ave.
-# Sioux Falls, South Dakota 57103
-#
-# WATS voice: 1-800/398-4946
-# POTS fax: +1 605/338-8709
-# POTS voice: +1 605/338-9650
-# Email: <compair@sd.cybernex.net>
-# Internet/Web: <http://www.com-pair.com>
+d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
+ use=d413-unix, use=dgunix+fixed,
+d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
+ use=d413-unix-w, use=dgunix+fixed,
+d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
+ use=d413-unix-25, use=dgunix+fixed,
+d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
+ use=d413-unix-s, use=dgunix+fixed,
+d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
+ use=d413-unix-sr, use=dgunix+fixed,
+d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
+ use=d413-unix, use=dgunix+ccc,
+d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
+ use=d413-unix-w, use=dgunix+ccc,
+d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
+ use=d413-unix-25, use=dgunix+ccc,
+d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
+ use=d413-unix-s, use=dgunix+ccc,
+d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
+ use=d413-unix-sr, use=dgunix+ccc,
+
+# DASHER D470C color terminal in ANSI mode.
+# Like the D460 but with 16 colors and without a compressed mode.
#
-# Kimtron entries include (undocumented) codes for: enter dim mode,
-# enter bold mode, enter reverse mode, turn off all attributes.
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[1;1;80w - margins at columns 1 and 80
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
#
+d470c|d470|Data General DASHER D470C,
+ is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
+ sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
+ 2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
+ use=dg+color, use=d460,
-# Kimtron ABM 85 added by Dual Systems
-# (abm85: removed duplicated ":kd=^J:" -- esr)
-abm85|Kimtron ABM 85,
- OTbs, am, bw, msgr,
- cols#80, it#8, lines#24, xmc#1,
- cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\Ey, el=\Et, ht=^I,
- if=/usr/share/tabset/stdcrt, il1=\EE,
- is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
- kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
- rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
-# Kimtron ABM 85H added by Dual Systems.
-# Some notes about the abm85h entries:
-# 1) there are several firmware revs of 85H in the world. Use abm85h-old for
-# firmware revs prior to SP51
-# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
-# abm85e entry if it is in tvi920 emulation mode. They are incompatible
-# in some places and NOT software settable i.e., <is2> can't fix it)
-# 3) In 85h mode, the arrow keys and special functions transmit when
-# the terminal is in dup-edit, and work only locally in local-edit.
-# Vi won't swallow `del char' for instance, but <smcup> turns on
-# dup-edit anyway so that the arrow keys will work right. If the
-# arrow keys don't work the way you like, change <smcup>, <rmcup>, and
-# <is2>. Note that 920E mode does not have software commands to toggle
-# between dup and local edit, so you get whatever was set last on the
-# terminal.
-# 4) <flash> attribute is nice, but seems too slow to work correctly
-# (\Eb<pad>\Ed)
-# 5) Make sure `hidden' attributes are selected. If `embedded' attributes
-# are selected, the <xmc@> entry should be removed.
-# 6) auto new-line should be on (selectable from setup mode only)
-#
-# From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
-abm85h|Kimtron ABM 85H native mode,
- hs,
- xmc@,
- bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
- fsl=^M, invis@,
- is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
- kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
- use=abm85,
-abm85e|Kimtron ABM 85H in 920E mode,
- xmc@,
- bel=^G, dim=\E), flash@,
- is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
- rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
-abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
- xmc@,
- bel=^G, dim=\E),
- is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
- rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
-# From: <malman@bbn-vax.arpa>
-# (kt7: removed obsolete :ma=^V^J^L :" -- esr)
-kt7|kimtron model kt-7,
- OTbs, am,
- cols#80, it#8, lines#24,
- cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
- if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
- kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
- kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
- kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
- kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
- kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
-# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
-# other kt7 entry and the adjacent key capabilities). Removed EE which is
-# identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
-# but we can't figure out what.
-kt7ix|kimtron model kt-7 or 70 in IX mode,
- am, bw,
- cols#80, it#8, lines#25,
- acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
- civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
- cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
- home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
- is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
- ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
- kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
- kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
- nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
- sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
+d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
+ is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
+ sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t
+ 2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
+ use=dg+color, use=d460-7b,
-#### Microdata/MDIS
-#
-# This was a line of terminals made by McDonnell-Douglas Information Systems.
-# These entries come direct from MDIS documentation. I have edited them only
-# to move primary names of the form p[0-9] * to aliases, and to comment out
-# <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
-# also removed the change history; the last version indicates this is
-# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
+# Initialization string 2 sets:
+# ^^FQ2 - default cursor (solid rectangle)
+# ^^FW - character protection disabled
+# ^^F\^ - horizontal scrolling enabled (for alignment)
+# ^^FX004? - margins at columns 0 and 79
+# ^^F] - horizontal scrolling disabled
+# ^^O - primary character set
+# ^^FS00 - default character set (the keyboard native language)
+# - (should reset scrolling regions, but that glitches the screen)
#
+d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
+ is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O
+ \036FS00,
+ use=dgmode+color, use=d460-dg,
-# McDonnell Information Systems Terminal Family History
-# =========================================
-#
-# Prism-1, Prism-2 and P99:
-# Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
-#
-# Prism-4 and Prism-5:
-# Slightly less ancient range of Microdata terminals. Follow-on from
-# Prism-2, but with many enhancements. P5 has eight display pages.
-#
-# Prism-6:
-# A special terminal for use with library systems, primarily in Germany.
-# Limited numbers. Similar functionality to P5 (except attributes?).
-#
-# Prism-7, Prism-8 and Prism-9:
-# More recent range of MDIS terminals, in which P7 and P8
-# replace the P4 & P5, with added functionality, and P9 is the flagship.
-# The P9 has two emulation modes - P8 and ANSI - and includes a
-# large number of the DEC VT220 control sequences. Both
-# P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
+# DASHER D555 terminal in ANSI mode.
+# Like a D411, but has an integrated phone.
+d555|Data General DASHER D555,
+ use=d411,
+d555-7b|Data General DASHER D555 in 7-bit mode,
+ use=d411-7b,
+d555-w|Data General DASHER D555 in wide mode,
+ use=d411-w,
+d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
+ use=d411-7b-w,
+d555-dg|Data General DASHER D555 series in DG mode,
+ use=d411-dg,
+
+# DASHER D577 terminal in ANSI mode.
+# Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
+d577|Data General DASHER D577,
+ use=d411,
+d577-7b|Data General DASHER D577 in 7-bit mode,
+ use=d411-7b,
+d577-w|Data General DASHER D577 in wide mode,
+ use=d411-w,
+d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
+ use=d411-7b-w,
+
+d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
+ use=d411-dg,
+
+# DASHER D578 terminal.
+# Like a D577, but without compressed mode; like a D470C in this respect.
#
-# Prism-12 and Prism-14:
-# Latest range, functionally very similar to the P9. The P14 has a
-# black-on-white overscanning screen.
+# Initialization string 1 sets:
+# \E[<0;<1;<2;<4l
+# <0 - scrolling enabled
+# <1 - blink enabled
+# <2 - horizontal scrolling enabled (for alignment)
+# <4 - print characters regardless of attributes
+# \E[1;1;80w - margins at columns 1 and 80
+# \E[1;6;<2h
+# 1 - print all characters even if protected
+# 6 - character protection disabled
+# <2 - horizontal scrolling disabled
+# - (should reset scrolling regions, but that glitches the screen)
#
-# The terminfo definitions given here are:
+d578|Data General DASHER D578,
+ is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
+d578-7b|Data General DASHER D578 in 7-bit mode,
+ is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
+
+#### Datamedia (dm)
#
-# p2 - Prism-2 (or Prism-1 or P99).
+# Datamedia was headquartered in Nashua, New Hampshire until it went
+# out of business in 1993, but the ID plates on the terminals referred
+# to the factory in Pennsauken, NJ. The factory was sold to a PCB board
+# manufacturer which threw out all information about the terminals.
#
-# p4 - Prism-4 (and older P7s & P8s).
-# p5 - Prism-5 (or Prism-6).
+
+cs10|colorscan|Datamedia Color Scan 10,
+ msgr,
+ cols#80, lines#24,
+ bel=^G, clear=\E[H\E[J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+cs10-w|Datamedia Color Scan 10 with 132 columns,
+ cols#132,
+ cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
+
+# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
+dm1520|dm1521|datamedia 1520,
+ OTbs, am, xenl,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, ht=^I, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
+ khome=^Y,
+# dm2500: this terminal has both <ich> and <smir>. Applications using
+# termcap/terminfo directly (rather than through ncurses) might be confused.
+dm2500|datamedia2500|datamedia 2500,
+ OTbs, OTnc,
+ cols#80, lines#24,
+ bel=^G, clear=^^^^^?, cub1=^H, cud1=\n, cuf1=^\,
+ cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
+ dch1=\020\010\030\035$<10*>,
+ dl1=\020\032\030\035$<10*>, el=^W, home=^B,
+ ich1=\020\034\030\035$<10*>,
+ il1=\020\n\030\035\030\035$<15>, ind=\n, pad=\377,
+ rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
+ smdc=^P, smir=^P, smso=^N,
+# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
+# also, has a meta-key.
+# From: <goldberger@su-csli.arpa>
+# (dmchat: ":MT:" changed to ":km:" -- esr)
+dmchat|dmchat version of datamedia 2500,
+ km,
+ dl1=\020\032\030\035$<2/>,
+ il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
+# (dm3025: ":MT:" changed to ":km:" -- esr)
+dm3025|datamedia 3025a,
+ OTbs, km,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\EM$<2>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
+ dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
+ home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=\n, ip=$<6>,
+ is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
+ smir=\EP, smso=\EO1,
+dm3045|datamedia 3045a,
+ OTbs, am, eo, km@, ul, xenl,
+ dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
+ kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
+ kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
+ khome=\EH, pad=^?, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
+ use=dm3025,
+# Datamedia DT80 soft switches:
+# 1 0=Jump 1=Smooth
+# Autorepeat 0=off 1=on
+# Screen 0=Dark 1=light
+# Cursor 0=u/l 1=block
#
-# p7 - Prism-7.
-# p8 - Prism-8 (in national or multinational mode).
-# p8-w - 132 column version of p8.
-# p9 - Prism-9 in ANSI mode.
-# p9-w - 132 column version of p9.
-# p9-8 - Prism-9 in Prism-8 emulation mode.
-# p9-8-w - As p9-8, but with 132 columns.
+# 2 Margin Bell 0=off 1=on
+# Keyclick 0=off 1=on
+# ANSI/VT52 0=VT52 1=ANSI
+# Xon/Xoff 0=Off 1=On
#
-# p12 - Prism-12 in ANSI mode.
-# p12-w - 132 column version of p12.
-# p12-m - Prism-12 in MDC emulation mode.
-# p12-m-w - As p12-m, but with 132 columns.
-# p14 - Prism-14 in ANSI mode.
-# p14-w - 132 column version of p14.
-# p14-m - Prism-14 in MDC emulation mode.
-# p14-m-w - As p14-m, but with 132 columns.
+# 3 Shift3 0=Hash 1=UK Pound
+# Wrap 0=Off 1=On
+# Newline 0=Off 1=On
+# Interlace 0=Off 1=On
#
-# p2: Prism-2
-# -----------
+# 4 Parity 0=Odd 1=Even
+# Parity 0=Off 1=On
+# Bits/Char 0=7 1=8
+# Power 0=60Hz 1=50Hz
#
-# Includes Prism-1 and basic P99 without SP or MP loaded.
-# The simplest form of Prism-type terminal.
-# Basic cursor movement and clearing operations only.
-# No video attributes.
-# Notes:
-# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
-# value up, followed by backspace.
+# 5 Line Interface 0=EIA 1=Loop
+# Aux Interface 0=EIA 1=Loop
+# Local Copy 0=Off 1=On
+# Spare
#
-prism2|MDC Prism-2,
- am, bw, msgr,
+# 6 Aux Parity 0=Odd 1=Even
+# Aux Parity 0=Off 1=On
+# Aux Bits/Char 0=7 1=8
+# CRT Saver 0=Off 1=On
+# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
+dm80|dmdt80|dt80|datamedia dt80/1,
+ clear=\E[2J\E[H, cud1=\n, cuf1=\E[C,
+ cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
+ rmso=\E[m, rmul=\E[m, sgr0=\E[m\017$<2>, smso=\E[7m,
+ smul=\E[4m, use=vt100+4bsd,
+# except in 132 column mode, where it needs a little padding.
+# This is still less padding than the vt100, and you can always turn on
+# the ^S/^Q handshaking, so you can use vt100 flavors for things like
+# reverse video.
+dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
+ cols#132,
+ clear=\E[H\E[2J$<50/>, cud1=\n,
+ cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
+ ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
+# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
+dt80-sas|Datamedia DT803/DTX for SAS usage,
+ am, bw,
cols#80, lines#24,
- bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
- cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
- cuu1=^Z, ed=\EJ, el=\EK, home=^A,
- hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
- ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
+ acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
+ bel=^G, clear=^L, cr=\r,
+ csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
+ cub1=^H, cud1=\EB, cuf1=^\,
+ cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
+ el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
+ is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=\n,
+ kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
+ rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
+ smso=\E$2\004, tbc=\E'0,
-# p4: Prism-4
-# -----------
-#
-# Includes early versions of P7 & P8.
-# Basic family definition for most Prisms (except P2 and P9 ANSI).
-# Notes:
-# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
-# value up, followed by backspace.
-# Cursor key definitions removed because they interfere with vi and csh keys.
-#
-prism4|p4|P4|MDC Prism-4,
- am, bw, hs, mc5i, msgr,
- cols#80, lines#24, wsl#72, xmc#1,
- bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
- cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
- cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
- cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
- fsl=^]\345, home=^A,
- hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
- ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
- rev=^CD, rmso=^C\s, rmul=^C\s,
- sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
- sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
- vpa=\013%p1%{32}%+%c,
+# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
+# These aren't end-all Excel termcaps; but do insert/delete char/line
+# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
+# The naming convention has been bent somewhat, with the use of E? (where
+# E is for 'Excel') as # a name. This was done to distinguish the entries
+# from the other Datamedias in use here, and yet to associate a model of
+# the Excel terminals with the regular datamedia terminals that share
+# major characteristics.
+excel62|excel64|datamedia Excel 62,
+ dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
+ kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
+ use=dt80,
+excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
+ dch1=\E[P, kbs=^H, kcub1=^H, kcud1=\n, kf5=\EOu, kf6=\EOv,
+ kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
+ use=dt80w,
+excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
+ dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=\n,
+ kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
+ smir=\E[4h, use=dt80,
-# p5: Prism-5
-# -----------
-#
-# Same definition as p4. Includes Prism-6 (not tested!).
-# Does not use any multi-page features.
+#### Falco
#
-prism5|p5|P5|MDC Prism-5,
- use=p4,
-
-# p7: Prism-7
-# -----------
+# Falco Data Products
+# 440 Potrero Avenue
+# Sunnyvale, CA 940864-196
+# Vox: (800)-325-2648
+# Fax: (408)-745-7860
+# Net: techsup@charm.sys.falco.com
#
-# Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
-# Notes:
-# Use p4 for very early models of P7.
-# Rev-index removed; can't send nulls to terminal in 8-bit modes.
+# Current Falco models as of 1995 are generally ANSI-compatible and support
+# emulations of DEC VT-series, Wyse, and Televideo types.
#
-prism7|p7|P7|MDC Prism-7,
- cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
-# p8: Prism-8
-# -----------
-#
-# Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
-# Supports national and multinational character sets.
-# Notes:
-# Alternate char set operations only work in multinational mode.
-# Use p4 for very early models of P8.
-# Rev-index removed; can't send nulls to terminal in 8-bit modes.
-# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
+# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
+# This terminal was released around 1983 and was discontinued long ago.
+# The standout and underline highlights are the same.
+falco|ts1|ts-1|falco ts-1,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
+ ind=\n, is2=\Eu\E3, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
+ kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
+ smir=\Eq, smso=\Eg1, smul=\Eg1,
+falco-p|ts1p|ts-1p|falco ts-1 with paging option,
+ OTbs, am, da, db, mir, msgr, ul,
+ cols#80, it#8, lines#24,
+ bel=^G, cbt=\EI, clear=\E*, cr=\r, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
+ dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
+ il1=\EE, ind=\n, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
+ rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
+ smso=\Eg4, smul=\Eg1,
+# (ts100: I added <rmam>/<smam> based on the init string -- esr)
+ts100|ts100-sp|falco ts100-sp,
+ am, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
+ el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
+ ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=\n, is1=\E~)\E~ea,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
+ rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+ use=vt100+fnkeys,
+ts100-ctxt|falco ts-100 saving context,
+ rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
+
+#### Florida Computer Graphics
#
-prism8|p8|P8|MDC Prism-8,
- cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
- vpa=\E[%i%p1%dd, use=p4,
-# p8-w: Prism-8 in 132 column mode
-# --------------------------------
-#
-# 'Wide' version of p8.
-# Notes:
-# Rev-index removed; can't send nulls to terminal in 8-bit modes.
+# Florida Computer Graphics Beacon System, using terminal emulator program
+# "host.com", as provided by FCG. This description is for an early release
+# of the "host" program. Known bug: <ed> clears the whole screen, so it's
+# commented out.
+
+# From: David Bryant <cbosg!djb> 1/7/83
+beacon|FCG Beacon System,
+ am, da, db,
+ cols#80, lines#32,
+ bel=\ESTART\r\E37\r\EEND\r$<1>,
+ blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=\r,
+ cub1=^H, cud1=\n, cuf1=\EV,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
+ dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
+ ind=\n, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
+ rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
+ rmul=\ESTART\r\E60\,0\r\EEND\r,
+ sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
+ smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
+ smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
+ smul=\ESTART\r\E60\,1\r\EEND\r,
+
+#### Fluke
#
-prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
- cols#132,
- is2=\E[<12h\E[<14h, use=p8,
-# p9: Prism-9 in ANSI mode
-# -------------------------
-#
-# The "flagship" model of this generation of terminals.
-# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
-# Notes:
-# Tabs only reset by "reset". Otherwise assumes default (8 cols).
-# Fixes to deal with terminal firmware bugs:
-# . 'ri' uses insert-line since rev index doesn't always
-# . 'sgr0' has extra '0' since esc[m fails
-# . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
-# Not covered in the current definition:
-# . Labels
-# . Programming Fn keys
-# . Graphic characters (defaults correctly to vt100)
-# . Padding values (sets xon)
-# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
-#
-prism9|p9|P9|MDC Prism-9 in ANSII mode,
- am, bw, hs, msgr, xenl, xon,
- cols#80, it#8, lines#24, vt#3, wsl#72,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
- clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
- dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
- ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
- ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
- is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
- kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
- kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
- kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
- khome=\E[H, nel=^M^J, prot=\E[32%{, rc=\E[%z,
- rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
- rmso=\E[27m, rmul=\E[24m,
- rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
- sc=\E[%y,
- sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?%p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
- sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
- use=ansi+pp,
+# The f1720a differences from ANSI: no auto margin, destructive
+# tabs, # of lines, funny highlighting and underlining
+f1720|f1720a|fluke 1720A,
+ xt,
+ cols#80, lines#16, xmc#1,
+ bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
+ el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
+ kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
+ smso=\E[7m, smul=\E[4m,
-# p9-w: Prism-9 in 132 column mode
-# --------------------------------
+#### Liberty Electronics (Freedom)
#
-# 'Wide' version of p9.
+# Liberty Electronics
+# 48089 Fremont Blvd
+# Fremont CA 94538
+# Vox: (510)-623-6000
+# Fax: (510)-623-7021
+
+# From: <faletti@berkeley.edu>
+# (f100: added empty <acsc> to suppress a tic warning;
+# made this relative to adm+sgr -- note that <invis> isn't
+# known to work for f100 but does on the f110. --esr)
+f100|freedom|freedom100|freedom model 100,
+ OTbs, am, bw, hs, mir, msgr, xon,
+ cols#80, lines#24,
+ acsc=, bel=^G, cbt=\EI, clear=^Z, cr=\r, cub1=^H, cud1=\n,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
+ flash=\Eb$<200>\Ed, fsl=\r, home=^^, hpa=\E]%p1%{32}%+%c,
+ ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=\n, ip=$<6>,
+ is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
+ kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
+ smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
+ vpa=\E[%p1%{32}%+%c, use=adm+sgr,
+f100-rv|freedom-rv|freedom 100 in reverse video,
+ flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
+# The f110 and f200 have problems with vi(1). They use the ^V
+# code for the down cursor key. When kcud1 is defined in terminfo
+# as ^V, the Control Character Quoting capability (^V in insert mode)
+# is lost! It cannot be remapped in vi because it is necessary to enter
+# a ^V to to quote the ^V that is being remapped!!!
#
-prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
+# f110/f200 users will have to decide whether
+# to lose the down cursor key or the quoting capability. We will opt
+# initially for leaving the quoting capability out, since use of VI
+# is not generally applicable to most interactive applications
+# (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
+f110|freedom110|Liberty Freedom 110,
+ bw@, eslok,
+ it#8, wsl#80,
+ blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
+ dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
+ ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
+ kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
+ ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
+ smso=\EG<, tsl=\Ef, use=f100,
+f110-14|Liberty Freedom 110 14inch,
+ dch1@, use=f110,
+f110-w|Liberty Freedom 110 - 132 cols,
+ cols#132, use=f110,
+f110-14w|Liberty Freedom 110 14in/132 cols,
cols#132,
- is2=\E[&p\E[<12l\E F\E[<14h,
- rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
+ dch1@, use=f110,
+# (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+f200|freedom200|Liberty Freedom 200,
+ OTbs, am, eslok, hs, mir, msgr, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
+ clear=^Z, cnorm=\E.1, cr=\r,
+ csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
+ flash=\Eo$<200/>\En, fsl=\r, home=^^,
+ hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=\n, kbs=^H,
+ kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
+ kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
+ ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
+ tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
+f200-w|Liberty Freedom 200 - 132 cols,
+ cols#132, use=f200,
+# The f200 has the ability to reprogram the down cursor key. The key is
+# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
+# so powering the terminal off and on will not cause the change to be lost.
+f200vi|Liberty Freedom 200 for vi,
+ flash=\Eb$<200/>\Ed, kcud1=\n, use=f200,
+f200vi-w|Liberty Freedom 200 - 132 cols for vi,
+ cols#132, use=f200vi,
-# p9-8: Prism-9 in P8 mode
-# ------------------------
-#
-# P9 terminal in P8 emulation mode.
-# Similar to p8 definition.
-# Insertion and deletion operations possible.
+#### GraphOn (go)
#
-prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
-
-# p9-8-w: Prism-9 in P8 and 132 column modes
-# ------------------------------------------
+# Graphon Corporation
+# 544 Division Street
+# Campbell, CA 95008
+# Vox: (408)-370-4080
+# Fax: (408)-370-5047
+# Net: troy@graphon.com (Troy Morrison)
#
-# P9 terminal in P8 emulation mode and 132 column mode.
#
-prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
+# The go140 and go225 have been discontinued. GraphOn now makes X terminals,
+# including one odd hybrid that starts out life on power-up as a character
+# terminal, than can be switched to X graphics mode (driven over the serial
+# line) by an escape sequence. No info on this beast yet.
+# (go140: I added <rmam>/<smam> based on the init string -- esr)
+go140|graphon go-140,
+ OTbs,
+ cols#80, it#8, lines#24,
+ clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J$<10/>, el=\E[K, ht=^I,
+ if=/usr/share/tabset/vt100, il1=\E[L,
+ is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+go140w|graphon go-140 in 132 column mode,
+ am,
+ cols#132,
+ is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
+ use=go140,
+# Hacked up vt200 termcap to handle GO-225/VT220
+# From: <edm@nwnexus.WA.COM>
+# (go225: I added <rmam>/<smam> based on the init string -- esr)
+go225|go-225|Graphon 225,
+ OTbs, am, mir, xenl,
+ cols#80, it#8, lines#25, vt#3,
+ blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
+ is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
+ rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
+ rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
+ rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
+ sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
+ smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
-# p12: Prism-12 in ANSI mode
-# ---------------------------
+#### Harris (Beehive)
#
-# See p9 definition.
+# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
+# Their terminal group is ancient history now (1995) though the parent
+# company is still in business.
#
-prism12|p12|P12|MDC Prism-12 in ANSI mode,
- use=p9,
-# p12-w: Prism-12 in 132 column mode
-# ----------------------------------
-#
-# 'Wide' version of p12.
+# Beehive documentation is undated and marked Preliminary and has no figures
+# so we must have early Superbee2 (Model 600, according to phone conversation
+# with mfr.). It has proved reliable except for some missing padding
+# (notably after \EK and <nl> at bottom of screen).
#
-prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
- use=p9-w,
-
-# p12-m: Prism-12 in MDC emulation mode
-# -------------------------------------
+# The key idea is that AEP mode is poison for <cup> & that US's in
+# the local memory should be avoided like the plague. That means
+# that the 2048 character local buffer is used as 25 lines of 80
+# characters, period. No scrolling local memory, folks. It also
+# appears that we cannot use naked INS LINE feature since it uses
+# US. The sbi fakes <il1> with an 80-space insert that may be too
+# slow at low speeds; also spaces get converted to \040 which is
+# too long for some programs (not vi). DEL LINE is ok but slow.
#
-# P12 terminal in MDC emulation mode.
-# Similar to p8 definition.
-# Insertion and deletion operations possible.
+# The <nl> string is designed for last line of screen ONLY; cup to
+# 25th line corrects the motion inherent in scrolling to Page 1.
#
-prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
- use=p9-8,
-
-# p12-m-w: Prism-12 in MDC emulation and 132 column modes
-# -------------------------------------------------------
+# There is one understood bug. It is that the screen appears to
+# pop to a new (blank) page after a <nel>, or leave a half-line
+# ellipsis to a quad that is the extra 48 memory locations. The
+# data received is dumped into memory but not displayed. Not to
+# worry if <cup> is being used; the lines not displayed will be,
+# whenever the cursor is moved up there. Since <cup> is addressed
+# relative to MEMORY of window, nothing is lost; but beware of
+# relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
+# therefore, is setenv MORE -c .
#
-# P12 terminal in MDC emulation mode and 132 column mode.
+# WARNING: Not all features tested.
#
-prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
- use=p9-8-w,
-
-# p14: Prism-14 in ANSII mode
-# ---------------------------
+# Timings are assembled from 3 sources. Some timings may reflect
+# SB2/Model 300 that were used if more conservative.
+# Tested on a Model 600 at 1200 and 9600 bd.
#
-# See p9 definition.
+# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
+# placed on the keyboard and useless because of AEP, is made
+# into a backspace key. In use ESC must be pressed twice (to send)
+# and sending ^C must be prefixed by ESC to avoid that weird
+# transmit mode associated with ENTER key.
#
-prism14|p14|P14|MDC Prism-14 in ANSII mode,
- use=p9,
-
-# p14-w: Prism-14 in 132 column mode
-# ----------------------------------
+# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
+# the screen, then it has dropped into ENTER mode; hit
+# RESET--ONLINE--!tset.
#
-# 'Wide' version of p14.
+# As delivered this machine has a FATAL feature that will throw
+# it into that strange transmit state (SPOW) if the space bar is
+# hit after a CR is received, but before receiving a LF (or a
+# few others).
#
-prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
- use=p9-w,
-
-# p14-m: Prism-14 in MDC emulation mode
-# -------------------------------------
+# The circuits MUST be modified to eliminate the SPOW latch.
+# This is done by strapping on chip A46 of the I/O board; cut
+# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
+# chip. This mod has been checked out on a Mod 600 of Superbee II.
+# With this modification absurdly high timings on cr are
+# unnecessary.
#
-# P14 terminal in MDC emulation mode.
-# Similar to p8 definition.
-# Insertion and deletion operations possible.
+# NOTE WELL that the rear panel switch should be set to CR/LF,
+# not AEP!
#
-prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
- use=p9-8,
+sb1|beehive superbee,
+ OTbs, am, bw, da, db, mir, ul, xsb,
+ cols#80, lines#25, xmc#1,
+ bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
+ cub1=^H, cud1=\n, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
+ cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
+ el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
+ il1=\EN\EL$<3>\EQ\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
+ \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
+ \s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s\s
+ \s\s\s\s\s\EP$<3>\s\EO\ER\EA$<3>,
+ ind=\n, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
+ kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
+ kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
+ krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
+ rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
+ smso=\E_1, smul=\E_0, tbc=\E3,
+sbi|superbee|beehive superbee at Indiana U.,
+ xsb,
+ cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
+ use=sb1,
+# Alternate (older) description of Superbee - f1=escape, f2=^C.
+# Note: there are at least 3 kinds of superbees in the world. The sb1
+# holds onto escapes and botches ^C's. The sb2 is the best of the 3.
+# The sb3 puts garbage on the bottom of the screen when you scroll with
+# the switch in the back set to CRLF instead of AEP. This description
+# is tested on the sb2 but should work on all with either switch setting.
+# The f1/f2 business is for the sb1 and the <xsb> can be taken out for
+# the other two if you want to try to hit that tiny escape key.
+# This description is tricky: being able to use cup depends on there being
+# 2048 bytes of memory and the hairy <nl> string.
+superbee-xsb|beehive super bee,
+ am, da, db, xsb,
+ cols#80, it#8, lines#25,
+ clear=\EH\EJ$<3>, cnorm=\n, cr=\r$<1000>, cub1=^H, cud1=\n,
+ cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
+ dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
+ home=\EH, ht=^I, hts=\E1,
+ ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
+ kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
+ khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
+# This loses on lines > 80 chars long, use at your own risk
+superbeeic|super bee with insert char,
+ ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
+sb2|sb3|fixed superbee,
+ xsb@, use=superbee,
-# p14-m-w: Prism-14 in MDC emulation and 132 column modes
-# -------------------------------------------------------
-#
-# P14 terminal in MDC emulation mode and 132 column mode.
+#### Beehive Medical Electronics
#
-prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
- use=p9-8-w,
-
-# End of McDonnell Information Systems Prism definitions
-
-# These things were popular in the Pick database community at one time
-# From: George Land <georgeland@aol.com> 24 Sep 1996
-p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
- am, bw, hs, mir,
- cols#80, lines#24, ma#1, wsl#78, xmc#1,
- bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
- cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
- ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
- kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
- kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
- kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
- kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
- kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
- lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
- pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
- smul=^C0,
-
-#### Microterm (act, mime)
+# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
+# Regarding your question though; Beehive terminals weren't made by Harris.
+# They were made by Beehive Medical Electronics in Utah. They went out of
+# business in the early '80s.
#
-# The mime1 entries refer to the Microterm Mime I or Mime II.
-# The default mime is assumed to be in enhanced act iv mode.
+# (OK, then, I don't know why a couple of these say "harris beehive".)
#
-# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
-# freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
-# <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
-# since Sytek insists ^S means xoff.
-# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
-act4|microterm|microterm act iv,
- OTbs, am,
+# Reports are that most of these Beehive entries (except superbee) have not
+# been tested and do not work right. <rmso> is a trouble spot. Be warned.
+
+# (bee: <ich1> was empty, which is obviously bogus -- esr)
+beehive|bee|harris beehive,
+ OTbs, am, mir,
cols#80, lines#24,
- bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
- cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
- cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
- ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
- il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
- kcuu1=^Z,
-# The padding on :sr: and :ta: for act5 and mime is a guess and not final.
-# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
-# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
-act5|microterm5|microterm act v,
- kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
- use=act4,
-# Mimes using brightness for standout. Half bright is really dim unless
-# you turn up the brightness so far that lines show up on the screen.
-mime-fb|full bright mime1,
- is2=^S\E, rmso=^S, smso=^Y, use=mime,
-mime-hb|half bright mime1,
- is2=^Y\E, rmso=^Y, smso=^S, use=mime,
-# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
-# the more plausible ":do=^J:" -- esr)
-# uc was at one time disabled to get around a curses bug, be wary of it
-mime|mime1|mime2|mimei|mimeii|microterm mime1,
- OTbs, am,
- cols#80, it#8, lines#24, vt#9,
- bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
- cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
- cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
- il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
- kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
-# These termcaps (for mime2a) put the terminal in low intensity mode
-# since high intensity mode is so obnoxious.
-mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
+ cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
+ dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
+ kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
+ krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
+ smir=\EQ, smso=\EdP, smul=\Ed`,
+# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
+# good grief - does this entry make :sg:/:ug: when it doesn't have to?
+# look at those spaces in <rmso>/<smso>. Seems strange to me...
+# (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
+# really care, cook up one using ^F -- esr)
+beehive3|bh3m|beehiveIIIm|harris beehive 3m,
OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
- dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
- il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
- kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
- smir=\EE, smso=\E\:, smul=\E6,
-# This is the preferred mode (but ^X can't be used as a kill character)
-mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
- OTbs,
- cols#80, it#8, lines#24,
- bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
- dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
- il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
- kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
- rmul=\E5, smir=^O, smso=\E8, smul=\E4,
-# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
-mime3a|mime1 emulating 3a,
- am@,
- kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
-mime3ax|mime-3ax|mime1 emulating enhanced 3a,
- it#8,
- dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
- use=mime3a,
-# Wed Mar 9 18:53:21 1983
-# We run our terminals at 2400 baud, so there might be some timing problems at
-# higher speeds. The major improvements in this model are the terminal now
-# scrolls down and insert mode works without redrawing the rest of the line
-# to the right of the cursor. This is done with a bit of a kludge using the
-# exit graphics mode to get out of insert, but it does not appear to hurt
-# anything when using vi at least. If you have some users using act4s with
-# programs that use curses and graphics mode this could be a problem.
-mime314|mm314|mime 314,
+ cols#80, it#8, lines#20,
+ bel=^G, clear=^E^R, cr=\r, cub1=^H, cud1=\n, cuf1=^L, cuu1=^K,
+ dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
+ il1=\023$<160>, ind=\n, ll=^E^K, rmso=\s^_, smso=^]\s,
+beehive4|bh4|beehive 4,
am,
cols#80, lines#24,
- clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
- dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
- kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
-# Microterm mime 340 from University of Wisconsin
-mm340|mime340|mime 340,
- cols#80, lines#24,
- clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
- el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
- kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
-# This came from University of Wisconsin marked "astro termcap for jooss".
-# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
-# also added <rmam>/<smam> based on the init string -- esr)
-mt4520-rv|micro-term 4520 reverse video,
- am, hs, msgr, xenl, xon,
- cols#80, it#8, lines#24, wsl#80,
- bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
- fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
- is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
- kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
- ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
- ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
- rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
- sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
- tbc=\E[g, tsl=\E[25;1H,
-
-# Fri Aug 5 08:11:57 1983
-# This entry works for the ergo 4000 with the following setups:
-# ansi,wraparound,newline disabled, xon/xoff disabled in both
-# setup a & c.
-#
-# WARNING!!! There are multiple versions of ERGO 4000 microcode
-# Be advised that very early versions DO NOT WORK RIGHT !!
-# Microterm does have a ROM exchange program- use it or lose big
-# (ergo400: added <rmam>/<smam> based on the init string -- esr)
-ergo4000|microterm ergo 4000,
- da, db, msgr,
- cols#80, lines#66,
- bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
- dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
- el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
- is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
- kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
- lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
- rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
- smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
- smso=\E[7m$<20>,
+ bel=^G, clear=\EE, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
+ cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=\n,
+# There was an early Australian kit-built computer called a "Microbee".
+# It's not clear whether this is for one of those or for a relative
+# of the Beehive.
+microb|microbee|micro bee series,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EK, ht=^I, ind=\n, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
+ kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
+ rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
-#### NCR
+# 8675, 8686, and bee from Cyrus Rahman
+# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
+ha8675|harris 8675,
+ is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
+ kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
+ kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=\n, kf6=^T, kf7=^H, kf8=^?,
+ kf9=\Ee, use=bee,
+# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
+# in :is: -- esr)
+ha8686|harris 8686,
+ is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#
+ \E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F750
+ 21B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8
+ FB5021B7283#,
+ kf1=^B\Ep^C, kf10=\Ej, kf11=\EW, kf12=^B\E{^C,
+ kf13=^B\E|^C, kf14=^B\E}^C, kf15=^B\E~^C, kf16=^B\E^?^C,
+ kf2=^B\Eq^C, kf3=^B\Er^C, kf4=^B\Es^C, kf5=\E3, kf6=\EI,
+ kf7=\ER, kf8=\EJ, kf9=\E(, use=bee,
+
+#### Hazeltine
#
-# NCR's terminal group was merged with AT&T's when AT&T bought the company.
-# For what happened to that group, see the ADDS section.
+# Hazeltine appears to be out of the terminal business as of 1995. These
+# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
+# Harris. They have a hazeltine.com domain (but no web page there ) and can
+# be reached at:
#
-# There is an NCR4103 terminal that's just a re-badged Wyse-50.
+# Hazeltine
+# 450 East Pulaski Road
+# Greenlawn, New York 11740
#
-
-# The following vendor-supplied termcaps were captured from the Boundless
-# Technologies site, 8 March 1998. I removed all-upper-case names that were
-# identical, except for case, to lower-case ones. I also uncommented the acsc
-# capabilities.X
+# As late as 1993, manuals for the terminal product line could still be
+# purchased from:
#
-# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
-# DEC vt200/300 with color capabilities added.
-ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
- colors#8, pairs#64,
- op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- use=ncr260vt300an,
-# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
-# DEC vt200/300 with color capabilities added.
-ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
- colors#8, pairs#64,
- op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- use=ncr260vt300wan,
-# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
-# DEC vt200/300 with color capabilities added.
-ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
- colors#8, pairs#64,
- op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- use=ncr260vt300pp,
-# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
-# DEC vt200/300 with color capabilities added.
-ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
- colors#8, pairs#64,
- op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
- use=ncr260vt300wpp,
-# This definition for ViewPoint supports several attributes. This means
-# that it has magic cookies (extra spaces where the attributes begin).
-# Some applications do not function well with magic cookies. The System
-# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
-# If supporting various attributes is not vital, 'xmc#1' and the extra
-# attributes can be removed.
-# Mapping to ASCII character set ('acsc' capability) can also be
-# restored if needed.
-ncr260vppp|NCR 2900_260 viewpoint,
- am, bw, hs, km, mc5i, mir, msgr, xon,
- cols#80, lines#24, nlab#32, xmc#1,
- acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
- cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
- cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
- dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
- el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
- il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
- is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
- kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
- kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
- kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
- kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
- kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
- kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
- kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
- kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
- kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
- kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
- kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
- mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
- nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
- rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
- rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
- sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
- smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
-ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
- cols#132,
- cup=\Ea%i%p1%dR%p2%dC$<30>,
- is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
- rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
- use=ncr260vppp,
-ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
- am, hs, mir, msgr, xenl, xon,
- cols#80, lines#24, nlab#32,
- acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
- blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
- cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
- cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
- cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
- cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
- dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
- ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
- fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
- hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
- il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
- invis=\E[8m,
- is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
- knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
- rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
- rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
- rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
- sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
-ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
- cols#132,
- cup=\E[%i%p1%d;%p2%dH$<30>,
- is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- use=ncr260vt100an,
-ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
- is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
- kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
- lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
- rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- smkx=\E=, use=ncr260vt100an,
-ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
- cols#132,
- cup=\E[%i%p1%d;%p2%dH$<30>,
- is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- use=ncr260vt100pp,
-ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
- am, hs, mir, msgr, xenl, xon,
- cols#80, lines#24, nlab#32,
- acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
- blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
- csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
- cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
- cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
- cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
- cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
- dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
- ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
- fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
- ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
- ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
- is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
- kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
- kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
- kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
- kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
- kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
- kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
- kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
- kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
- mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
- ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
- rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
- rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
- sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
- smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
- use=vt220+keypad,
-ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
- cols#132,
- cup=\E[%i%p1%d;%p2%dH$<30>,
- is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
- rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
- use=ncr260vt200an,
-ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
- ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
- kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
- lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
- use=ncr260vt200an,
-ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
- cols#132,
- cup=\E[%i%p1%d;%p2%dH$<30>,
- is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- use=ncr260vt200pp,
-ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
- am, hs, mir, msgr, xenl, xon,
- cols#80, lines#24, nlab#32,
- acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
- blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
- csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
- cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
- cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
- cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
- cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
- dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
- ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
- fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
- ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
- ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
- is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
- kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
- kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
- kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
- kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
- kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
- kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
- kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
- khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
- krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
- nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
- rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
- rmul=\E[24m,
- rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
- sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
- smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
- use=vt220+keypad,
-ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
- cols#132,
- cup=\E[%i%p1%d;%p2%dH$<30>,
- is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
- rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
- use=ncr260vt300an,
-ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
- ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
- kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
- lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
- use=ncr260vt300an,
-NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
- cols#132,
- cup=\E[%i%p1%d;%p2%dH$<30>,
- is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
- use=ncr260vt300pp,
-# This terminfo file contains color capabilities for the Wyse325 emulation of
-# the NCR 2900/260C color terminal. Because of the structure of the command
-# (escape sequence) used to set color attributes, one of the fore/background
-# colors must be preset to a given value. I have set the background color to
-# black. The user can change this setup by altering the last section of the
-# 'setf' definition. The escape sequence to set color attributes is
-# ESC d y <foreground_color> <background_color> 1
-# In addition, the background color can be changed through the desk accessories.
-# The capablitiy 'op' sets colors to green on black (default combination).
+# TRW Customer Service Division
+# 15 Law Drive
+# P.O. Box 2076
+# Fairfield, NJ 07007-2078
+#
+# They're now (1998) a subsidiary of General Electric, operating under the
+# marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
+# at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
+#
+
+# Since <cuf1> is blank, when you want to erase something you
+# are out of luck. You will have to do ^L's a lot to
+# redraw the screen. h1000 is untested. It doesn't work in
+# vi - this terminal is too dumb for even vi. (The code is
+# there but it isn't debugged for this case.)
+hz1000|hazeltine 1000,
+ OTbs,
+ cols#80, lines#12,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\s, home=^K,
+ ind=\n,
+# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
+hz1420|hazeltine 1420,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\n, cuf1=^P,
+ cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
+ ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=\n, rmso=\E^Y,
+ smso=\E^_,
+# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
+# freakout with out-of-range args and tn3270. No hz since it needs to
+# receive tildes.
+hz1500|hazeltine 1500,
+ OTbs, am, hz,
+ cols#80, lines#24,
+ bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
+ cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
+ cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
+ il1=~\032$<40>, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^P,
+ kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
+# h1510 assumed to be in sane escape mode. Else use h1500.
+# (h1510: early versions of this entry apparently had "<rmso=\E^_>,
+# <smso=\E^Y>, but these caps were commented out in 8.3; also,
+# removed incorrect and overridden ":do=^J:" -- esr)
+hz1510|hazeltine 1510,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K, cuf1=^P,
+ cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
+ el=\E^O, il1=\E^Z, ind=\n,
+# Hazeltine 1520
+# The following switch settings are assumed for normal operation:
+# FULL CR U/L_CASE ESCAPE
+# FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
+# Other switches may be set for operator convenience or communication
+# requirements.
+hz1520|Hazeltine 1520,
+ OTbs, am, bw, msgr,
+ cols#80, lines#24,
+ bel=^G, bold=\E^_, clear=\E^\, cr=\r, cub1=^H, cud1=\n,
+ cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
+ ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, kbs=^H,
+ kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
+ kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
+ rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
+# This version works with the escape switch off
+# (h1520: removed incorrect and overridden ":do=^J:" -- esr)
+hz1520-noesc|hazeltine 1520,
+ am, hz,
+ cols#80, lines#24,
+ bel=^G, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
+ cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
+ home=~^R, il1=~^Z, ind=\n, rmso=~^Y, smso=~^_,
+# Note: the h1552 appears to be the first Hazeltine terminal which
+# is not braindamaged. It has tildes and backprimes and everything!
+# Be sure the auto lf/cr switch is set to cr.
+hz1552|hazeltine 1552,
+ OTbs,
+ cud1=\n, dl1=\EO, il1=\EE, lf1=blue, lf2=red, lf3=green,
+ use=vt52,
+hz1552-rv|hazeltine 1552 reverse video,
+ cud1=\n, rmso=\ET, smso=\ES, use=hz1552,
+# Note: h2000 won't work well because of a clash between upper case and ~'s.
+hz2000|hazeltine 2000,
+ OTbs, OTnc, am,
+ cols#74, lines#27,
+ bel=^G, clear=~\034$<6>, cub1=^H, cud1=\n,
+ cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
+ il1=~\032$<6>, ind=\n, pad=^?,
+# Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
+# I tested this termcap entry for the Hazeltine Esprit with vi. It seems
+# to work ok. There is one problem though if one types a lot of garbage
+# characters very fast vi seems not able to keep up and hangs while trying
+# to insert. That's in insert mode while trying to insert in the middle of
+# a line. It might be because the Esprit doesn't have insert char and delete
+# char as a built in function. Vi has to delete to end of line and then
+# redraw the rest of the line.
+esprit|Hazeltine Esprit I,
+ OTbs, am, bw,
+ cols#80, lines#24,
+ bel=^G, cbt=\E^T, clear=\E^\, cr=\r, cub1=^H, cud1=\E^K,
+ cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
+ ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=\n, is2=\E?, kbs=^H,
+ kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0\n,
+ kf1=^B1\n, kf2=^B2\n, kf3=^B3\n, kf4=^B4\n, kf5=^B5\n,
+ kf6=^B6\n, kf7=^B7\n, kf8=^B8\n, kf9=^B9\n, khome=\E^R,
+ lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
+ rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
+esprit-am|hazeltine esprit auto-margin,
+ am, use=esprit,
+# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
+# Vi it seems always wants to send a control J for "do" and it turned out
+# that the terminal would work somewhat if the auto LF/CR was turned off.
+# (hmod1: removed :dn=~^K: -- esr)
+hmod1|Hazeltine Modular 1,
+ OTbs, am, hz,
+ cols#80, lines#24,
+ bel=^G, cbt=~^T, clear=~^\, cr=\r, cub1=^H, cud1=~^K, cuf1=^P,
+ cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
+ ind=\n, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
+ rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
#
-# NOTE: The NCR Unix System Administrator's Shell will not function properly
-# if the 'pairs' capability is defined. Un-Comment the 'pairs'
-# capability and recompile if you wish to have it included.
+# Hazeltine Executive 80 Model 30 (1554?)
+# from Will Martin <control@ALMSA-1.ARPA> via BRL
+# Like VT100, except for different "am" behavior.
+hazel|exec80|h80|he80|Hazeltine Executive 80,
+ OTbs, OTpt, am,
+ cols#80, it#8, lines#24, vt#3,
+ OTnl=\n, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
+ clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
+ cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
+ ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
+ is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
+ rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
+ rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
+ rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
+ smul=\E[4m$<2/>,
+
+#### IBM
#
-ncr260wy325pp|NCR 2900_260 wyse 325,
- am, bw, hs, km, mc5i, mir, msgr, xon,
- colors#16, cols#80, lines#24, ncv#33, nlab#32,
- acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
- cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
- cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
- cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
- ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
- hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
- is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
- kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
- kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
- kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
- kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
- kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
- kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
- kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
- kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
- kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
- kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
- mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
- nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
- rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
- rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- setb=\s,
- setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
- sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
- smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
- tsl=\EF,
-ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
- cols#132,
- cup=\Ea%i%p1%dR%p2%dC$<30>,
- is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- use=ncr260wy325pp,
-# This definition for Wyse 350 supports several attributes. This means
-# that it has magic cookies (extra spaces where the attributes begin).
-# Some applications do not function well with magic cookies. The System
-# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
-# If supporting various attributes is not vital, 'xmc#1' and the extra
-# attributes can be removed.
-# Mapping to ASCII character set ('acsc' capability) can also be
-# restored if needed.
-# In addition, color capabilities have been added to this file. The drawback,
-# however, is that the background color has to be black. The foreground colors
-# are numbered 0 through 15.
+
+ibm327x|line mode IBM 3270 style,
+ gn,
+ clear=\r\n, el=\r, home=\r,
+
+ibm3101|i3101|IBM 3101-10,
+ OTbs, am, xon,
+ cols#80, lines#24,
+ bel=^G, clear=\EK, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EI, home=\EH, hts=\E0, ind=\n, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, nel=\r\n, tbc=\EH,
+ibm3151|IBM 3151 display,
+ is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
+ sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
+ %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
+ %{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
+ sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
+# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
+# removed kend, knp, kpp -TD
#
-# NOTE: The NCR Unix System Administrator's Shell does not function properly
-# with the 'pairs' capability defined as below. If you wish to
-# have it included, Un-comment it and recompile (using 'tic').
+# From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
+# Added ich1 (kich1 without ich1 doesn't make sense).
+# Added il1 (kil1 without il1 doesn't make sense).
+# Added xon (terminal uses XON/XOFF flow control).
+#
+ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
+ OTbs, am, mir, msgr, xon,
+ cols#80, it#8, lines#24,
+ acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x
+ \370,
+ bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=\r, cub1=\ED,
+ cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
+ ich1=\EP \010, il1=\EN, ind=\n, invis=\E4P, kbs=^H, kcbt=\E2,
+ kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
+ kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
+ kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
+ kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
+ kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
+ kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
+ kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
+ kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
+ rmcup=\E>A, rmso=\E4@, rmul=\E4@,
+ sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;
+ %?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t
+ %{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
+ sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
+
+ibm3161-C|IBM 3161-C NLS terminal using cartridge,
+ rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
+#
+# From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
+# Deleted il1. (il1 will now be inherited from ibm3161-C, which inherits
+# it from ibm3161.
+#
+ibm3162|IBM 3162 display,
+ blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
+ rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
+ use=ibm3161-C,
+
+# This really should not use setab/setaf, but it is clear that the
+# original terminfo does not toggle red/blue colors as in setb/setf.
+ibm3164|i3164|IBM 3164,
+ msgr,
+ colors#8, pairs#64,
+ op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
+ setab=\E4 %p1%{64}%+%c,
+ setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
+ smcup=\E!9/N\E>B, use=ibm3161,
+
+ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
+ am, bw, msgr, xon,
+ cols#80, it#8, lines#25,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
+ \263,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
+ hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
+ invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, kclr=\E[144q,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ ked=\E[148q, kel=\E[142q, kend=\E[146q, kf1=\E[001q,
+ kf10=\E[010q, kf11=\E[011q, kf12=\E[012q, kf13=\E[013q,
+ kf14=\E[014q, kf15=\E[015q, kf16=\E[016q, kf17=\E[017q,
+ kf18=\E[018q, kf19=\E[019q, kf2=\E[002q, kf20=\E[020q,
+ kf21=\E[021q, kf22=\E[022q, kf23=\E[023q, kf24=\E[024q,
+ kf25=\E[025q, kf26=\E[026q, kf27=\E[027q, kf28=\E[028q,
+ kf29=\E[029q, kf3=\E[003q, kf30=\E[030q, kf31=\E[031q,
+ kf32=\E[032q, kf33=\E[033q, kf34=\E[034q, kf35=\E[035q,
+ kf36=\E[036q, kf4=\E[004q, kf5=\E[005q, kf6=\E[006q,
+ kf7=\E[007q, kf8=\E[008q, kf9=\E[009q, khome=\E[H,
+ kich1=\E[139q, kil1=\E[140q, kind=\E[151q, knp=\E[154q,
+ kpp=\E[150q, kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\E[T,
+ rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
+ %;%?%p7%t;8%;m,
+ sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ use=ecma+index,
+
+ibmaed|IBM Experimental display,
+ OTbs, am, eo, msgr,
+ cols#80, it#8, lines#52,
+ clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
+ dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
+ il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ rmso=\E0, sgr0=\E0, smso=\E0,
+ibm-apl|apl|IBM apl terminal simulator,
+ lines#25, use=dm1520,
+# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
+# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
+ibmmono|IBM workstation monochrome,
+ eslok, hs,
+ bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
+ invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
+ kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
+ khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
+ lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
+ sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
+ use=ibm3101,
+ibmega|IBM Enhanced Color Display,
+ cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
+ nel=\r\n, use=ibmmono,
+# This color scheme is assumed in some recent IBM terminal descriptions
+# (green on black, emulated on a 16-color terminal).
+ibm+color|IBM color definitions,
+ colors#8, ncv#3, pairs#64,
+ op=\E[32m\E[40m,
+ setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e
+ %p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}
+ %=%t46m%e%p1%{7}%=%t107m%;,
+ setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e
+ %p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}
+ %=%t36m%e%p1%{7}%=%t97m%;,
+ibm+16color|IBM aixterm color definitions,
+ colors#16, pairs#0x100,
+ setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
+ setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
+ setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
+ %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+ setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e
+ %ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
+ibm5154|IBM 5154 Color display,
+ colors#8, ncv@, pairs#64,
+ bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
+ use=ibm+color,
+ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
+ rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
+ use=ibmmono,
+ibmvga-c|IBM VGA display color termcap,
+ cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
+ nel=\r\n, use=ibmega-c,
+ibmvga|IBM VGA display,
+ cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n,
+ nel=\r\n, use=ibmega,
+# ibmapa* and ibmmono entries come from ACIS 4.3 distribution
+rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
+ lines#32,
+ dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
+ibm6155|IBM 6155 Black & White display,
+ blink@, bold@, use=ibm5151,
+# Advanced Monochrome (6153) and Color (6154) Graphics Display:
+ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
+ lines#31,
+ dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
+ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
+ lines#31,
+ dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
+ use=ibmega-c,
+ibm6154|IBM 6154 Color displays,
+ blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1
+ 2%;m,
+ sgr0=\E[0;10m, use=ibm5154,
+ibm6153|IBM 6153 Black & White display,
+ blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p7%t;8%;%?%p6%t;1
+ 2%;m,
+ sgr0=\E[0;10m, use=ibm5151,
+ibm6153-90|IBM 6153 Black & White display,
+ cols#90, lines#36,
+ blink@, bold@, use=ibm5151,
+ibm6153-40|IBM 6153 Black & White display,
+ cols#40, lines#12, use=ibm6153-90,
+ibm8512|ibm8513|IBM color VGA Terminal,
+ am, mir, msgr,
+ cols#80, it#8, lines#25,
+ acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
+ clear=\E[H\E[J, cub1=\E[D, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
+ il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
+ kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
+ kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
+ kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
+ rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
+ rmir=\E[4l, rmso=\E[m, rmul=\E[m,
+ rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
+ smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
+ smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ use=ibm8503,
+hft-c|HFT with Color,
+ colors#8, pairs#64,
+ acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
+ use=ibm5151, use=ibm+color,
+hft-c-old|HFT with Color PC850,
+ colors#8, pairs#64,
+ setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
+ use=ibm+color,
+hft-old|AIWS High Function Terminal,
+ am, xon,
+ cols#80, lines#25,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
+ ht=^I, ich1=\E[@, il1=\E[L, ind=\n, invis=\E[8m, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
+ kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
+ kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
+ ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
+ibm-system1|system1|ibm system/1 computer,
+ am, xt,
+ cols#80, lines#24,
+ bel=^G, clear=^Z, cub1=^H, cuf1=^\,
+ cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
+ ind=\n,
+# lft-pc850 : IBM Low Function Terminal Device
+# lft "supports" underline, bold, and blink in the sense that the lft code
+# sets all the right bits. HOWEVER, depending upon the adapter, these
+# attributes may or may not be supported by the device driver.
+lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
+ am, bw, msgr, xon,
+ cols#80, it#8, lines#25,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
+ \263,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
+ home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
+ il1=\E[L, ind=\ED, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
+ kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
+ kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
+ kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
+ kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
+ kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
+ kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
+ kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
+ kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
+ kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
+ kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
+ kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
+ kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
+ krmir=\E[4l, rev=\E[7m, ri=\EL, rmacs=\E(B, rmir=\E[4l,
+ rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
+ %;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, use=ecma+index,
+# "Megapel" refers to the display adapter, which was used with the IBM RT
+# aka IBM 6150.
+ibm5081|hft|IBM Megapel Color display,
+ acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
+ s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
+ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
+ eslok, hs,
+ lines#33,
+ dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
+ use=ibmega-c,
+ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
+ use=hft-c,
+ibm8514|IBM 8514/a color VGA display,
+ eslok, hs,
+ dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
+ibm8514-c|IBM 8514 color display with standout and underline,
+ eslok, hs,
+ lines#41,
+ cr=\r, cud1=\n, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=\n,
+ kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, tsl=\Ej\EYI%+ \Eo,
+ use=ibmega-c,
+
#
-ncr260wy350pp|NCR 2900_260 wyse 350,
- am, bw, hs, km, mc5i, mir, msgr, xon,
- colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
- acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
- cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
- cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
- cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
- ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
- hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
- is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
- kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
- kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
- kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
- kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
- kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
- kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
- kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
- kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
- khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
- mc0=\EP$<10>, mc4=^T, mc5=^R,
- mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
- nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
- rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
- rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- setb=\s,
- setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
- sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
- smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
- tsl=\EF,
-ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
- cols#132,
- cup=\Ea%i%p1%dR%p2%dC$<30>,
- is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
- rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
- use=ncr260wy350pp,
-# This definition for Wyse 50+ supports several attributes. This means
-# that it has magic cookies (extra spaces where the attributes begin).
-# Some applications do not function well with magic cookies. The System
-# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
-# If supporting various attributes is not vital, 'xmc#1' and the extra
-# attributes can be removed.
-# Mapping to ASCII character set ('acsc' capability) can also be
-# restored if needed.
-# (ncr260wy50+pp: originally contained commented-out
-# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
-ncr260wy50+pp|NCR 2900_260 wyse 50+,
- am, bw, hs, km, mc5i, mir, msgr, xon,
- cols#80, lines#24, nlab#32, xmc#1,
- acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
- cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
- cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
- cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
- ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
- ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
- invis=\EG1,
- is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
- kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
- kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
- kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
- kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
- kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
- kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
- kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
- kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
- khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
- mc0=\EP$<10>, mc4=^T, mc5=^R,
- mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
- nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
- rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
- rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
- smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
-ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
- cols#132,
- cup=\Ea%i%p1%dR%p2%dC$<30>,
- is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
- rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
- use=ncr260wy50+pp,
-ncr260wy60pp|NCR 2900_260 wyse 60,
- am, bw, hs, km, mc5i, mir, msgr, xon,
- cols#80, lines#24, nlab#32,
- acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
- cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
- cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
- cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
- ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
- ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
- invis=\EG1,
- is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
- kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
- kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
- kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
- kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
- kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
- kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
- kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
- kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
- kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
- kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
- mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
- nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
- rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
- rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
- smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
- tsl=\EF,
-ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
- cols#132,
- cup=\Ea%i%p1%dR%p2%dC$<30>,
- is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
- use=ncr260wy60pp,
-ncr160vppp|NCR 2900_160 viewpoint,
- use=ncr260vppp,
-ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
- use=ncr260vpwpp,
-ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
- use=ncr260vt100an,
-ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
- use=ncr260vt100pp,
-ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
- use=ncr260vt100wan,
-ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
- use=ncr260vt100wpp,
-ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
- use=ncr260vt200an,
-ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
- use=ncr260vt200pp,
-ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
- use=ncr260vt200wan,
-ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
- use=ncr260vt200wpp,
-ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
- use=ncr260vt300an,
-ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
- use=ncr260vt300pp,
-ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
- use=ncr260vt300wan,
-ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
- use=ncr260vt300wpp,
-ncr160wy50+pp|NCR 2900_160 wyse 50+,
- use=ncr260wy50+pp,
-ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
- use=ncr260wy50+wpp,
-ncr160wy60pp|NCR 2900_160 wyse 60,
- use=ncr260wy60pp,
-ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
- use=ncr260wy60wpp,
-ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
- am, hs, mc5i, mir, msgr, xon,
- cols#80, it#8, lines#24, nlab#32,
- acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
- bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
- clear=\E[2J\E[1;1H$<300>, cr=^M,
- csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
- cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
- cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
- cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
- cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
- dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
- ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
- enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
- ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
- ind=\ED,
- is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
- kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
- kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
- rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
- rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
- rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
+# AIX entries. IBM ships these with AIX 3.2.5.
+# -- added rc, sc based on manpage -TD
+# -- added rmacs, smacs based on manpage -TD
+# Note that we could use ibm+16color, but that is not how IBM defines this one.
+aixterm|IBM Aixterm Terminal Emulator,
+ eslok, hs,
+ acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
+ fsl=\E[?F, rc=\E8, ri@, rmacs=\E(B, s0ds=\E(B, s1ds=\E(0,
sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
- sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
- smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
- tsl=\E[>+1$<70>,
-ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
- cols#132,
- is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
- rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
- use=ncrvt100an,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
+ %t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[0;10m\E(B, smacs=\E(0, tsl=\E[?%p1%dT,
+ use=ibm6154,
+aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
+ eslok, hs,
+ acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
+ fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
+ %t;8%;m%?%p9%t\E(0%e\E(B%;,
+ sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
+aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
+ eslok, hs,
+ bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7
+ %t;8%;m,
+ tsl=\E[?%p1%dT, use=ibm6153,
+jaixterm|IBM Kanji Aixterm Terminal Eemulator,
+ acsc@, rmacs@,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
+ %;m,
+ sgr0=\E[m, smacs@, use=aixterm,
+jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
+ acsc@, rmacs@,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8
+ %;m,
+ sgr0=\E[m, smacs@, use=aixterm-m,
+
+# This flavor is adapted from xterm, in turn from aixterm documentation -TD
+aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
+ use=ibm+16color, use=aixterm,
+
+#### Infoton/General Terminal Corp.
#
-# Vendor-supplied NCR termcaps end here
-# NCR7900 DIP switches:
+# gt100 sounds like something DEC would come out with. Let's hope they don't.
+i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
+ ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
+ ind=\n, rmso=\Ea, smso=\Eb,
+i400|infoton 400,
+ OTbs, am,
+ cols#80, lines#25,
+ bel=^G, clear=\E[2J, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
+ dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
+ il1=\E[L, ind=\n, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
+# (addrinfo: removed obsolete ":bc=^Z:" -- esr)
+addrinfo,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y,
+ cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=\n, ll=^H^\,
+# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
+infoton,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=\r, cub1=^Z, cud1=\n, cuf1=^Y, cuu1=^\,
+ ed=^K, ind=\n, ll=^H^\,
+
+# The ICL6402 was actually the Kokusai Display System 6402.
+# The 6404 was the KDS7372 (color version of the 6402).
#
-# Switch A:
-# 1-4 - Baud Rate
-# 5 - Parity (Odd/Even)
-# 6 - Don't Send or Do Send Spaces
-# 7 - Parity Enable
-# 8 - Stop Bits (One/Two)
+# ICL6404 control codes follow:
#
-# Switch B:
-# 1 - Upper/Lower Shift
-# 2 - Typewriter Shift
-# 3 - Half Duplex / Full Duplex
-# 4 - Light/Dark Background
-# 5-6 - Carriage Return Without / With Line Feed
-# 7 - Extended Mode
-# 8 - Suppress Keyboard Display
+#code function
+#~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#ctrl-A set SOM position at cursor position
+#ctrl-G Bell
+#ctrl-H Backspace
+#ctrl-I Horizontal tab
+#ctrl-J Linefeed
+#ctrl-K Cursor up
+#ctrl-L Cursor right
+#ctrl-M Carriage return
+#ctrl-N Disable xon/xoff to host
+#ctrl-O Enable xon/xoff to host
+#ctrl-R Enable bidirectional mode
+#ctrl-T Disable bidirectional mode
+#ctrl-V Cursor down
+#ctrl-Z Clear unprotected data to insert char
+#ctrl-^ Cursor home
+#ctrl-_ Newline
#
-# Switch C:
-# 1 - End of line entry disabled/enabled
-# 2 - Conversational mode / (Local?) Mode
-# 3 - Control characters displayed / not displayed
-# 4 - (2-wire?) / 4-wire communications
-# 5 - RTS on and off for each character
-# 6 - (50Hz?) / 60 Hz
-# 7 - Exit after level zero diagnostics
-# 8 - RS-232 interface
+#ESC lead-in char for multiple character command
#
-# Switch D:
-# 1 - Reverse Channel (yes / no)
-# 2 - Manual answer (no / yes)
-# 3-4 - Cursor appearance
-# 5 - Communication Rate
-# 6 - Enable / Disable EXT turnoff
-# 7 - Enable / Disable CR turnoff
-# 8 - Enable / Disable backspace
+#ESC space R execute power on sequence
+#ESC ! p1 p2 define scroll region:
+# p1 = scroll top line: 20h - 37h
+# p1 = scroll bottom line: 20h - 37h
+#ESC " unlock keyboard
+#ESC # lock keyboard
+#ESC $ Semi-graphics mode on
+#ESC % Semi-graphics mode off
+#ESC & protect mode on
+#ESC ' protect mode off
+#ESC ( write protect mode off (full intensity)
+#ESC ) write protect mode on (half intensity)
#
-# Since each attribute parameter is 0 or 1, we shift each attribute (standout,
-# reverse, blink, dim, and underline) the appropriate number of bits (by
-# multiplying the 0 or 1 by a correct factor to shift) so the bias character,
-# '@' is (effectively) "or"ed with each attribute to generate the proper third
-# character in the <ESC>0 sequence. The <sgr> string implements the following
-# equation:
+#ESC * clear screen
+#ESC + clear unprotected data to insert char
+#ESC , clear unprotected data to half intensity spaces
+#ESC - p1 p2 p3 p4 address cursor to page, row, column:
+# p1 = page number 0 - 3
+# p2 = row 20h - 7fh
+# p3 = column (lo) 20h - 7fh
+# p4 = column (hi) 20h - 21h (only 132 col)
+#ESC . p1 set cursor style:
+# p1 = 0 invisible cursor
+# p1 = 1 block blinking cursor
+# p1 = 2 block steady cursor
+# p1 = 3 underline blinking cursor
+# p1 = 4 underline steady cursor
+#ESC / transmit cursor location (page, row, column)
+#ESC 0 p1 p2 p3 p4 program edit key:
+# p1 = edit key code: '@'-'S', '`'-'s'
+# p2 p3 p4 = program data (3 bytes)
#
-# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
-# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
+#ESC 1 set tab
+#ESC 2 clear tab at cursor
+#ESC 3 clear all tabs
+#ESC 4 send unprotect line to cursor
+#ESC 5 send unprotect page to cursor
+#ESC 6 send line to cursor
+#ESC 7 send page to cursor
+#ESC 8 n set scroll mode:
+# n = 0 set jump scroll
+# n = 1 set smooth scroll
+#ESC 9 n control display:
+# n = 0 display off
+# n = 1 display on
+#ESC : clear unprotected data to null
+#ESC ; clear unprotected data to insert char
#
-# Where: P1 <==> Standout attribute parameter
-# P2 <==> Underline attribute parameter
-# P3 <==> Reverse attribute parameter
-# P4 <==> Blink attribute parameter
-# P5 <==> Dim attribute parameter
-# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
-ncr7900i|ncr7900|ncr 7900 model 1,
- am, bw, ul,
- cols#80, lines#24, xmc#1,
- bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
- cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
- is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
- kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
- rmul=\E0@,
- sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
- sgr0=\E0@, smso=\E0Q, smul=\E0`,
-ncr7900iv|ncr 7900 model 4,
- am, bw, eslok, hs,
- cols#80, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
- cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
- fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
- kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
- kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
- khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
- tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
-# Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
-# The user can enter a CTRL-B to get out of this locked state.
-# In <hpa>, we want to output the character given by the formula:
-# ((col / 10) * 16) + (col % 10) where "col" is "p1"
-ncr7901|ncr 7901 model,
- am, bw, ul,
- cols#80, lines#24,
- bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
- cub1=^H, cud1=^J, cuf1=^F,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
- ed=\Ek, el=\EK,
- hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
- is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
- khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
- sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
- sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
- vpa=\013%p1%{64}%+%c,
-
-# Newbury Data Recording Limited (Newbury Data)
+#ESC < keyclick on
+#ESC = p1 p2 address cursor to row, column
+# p1 = row 20h - 7fh
+# p2 = column (lo) 20h - 7fh
+# p3 = column (hi) 20h - 21h (only 132 col)
+#ESC > keyclick off
+#ESC ? transmit cursor location (row, column)
+#
+#ESC @ copy print mode on
+#ESC A copy print mode off
+#ESC B block mode on
+#ESC C block mode off (conversation mode)
+#ESC D F set full duplex
+#ESC D H set half duplex
+#ESC E line insert
+#ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
+# 0 = black, 1 = red, 2 = green, 3 = yellow
+# 4 = blue, 5 = magenta, 6 = cyan, 7 = white
+#ESC G n set serial field attribute (n = 30h - 3Fh)
+#ESC H n full graphics mode:
+# n = 0 exit full graphics mode
+# n = 1 enter full graphics mode
+#ESC I back tab
+#ESC J back page
+#ESC K forward page
+#
+#ESC L unformatted page print
+#ESC M L move window left (132 col mode only)
+#ESC M R move window right (132 col mode only)
+#ESC N set page edit (clear line edit)
+#ESC O set line edit (clear page edit)
+#ESC P formatted page print
+#ESC Q character insert
+#ESC R line delete
+#ESC S send message unprotected only
+#ESC T erase line to insert char
+#ESC U set monitor mode (see ESC X, ESC u)
+#
+#ESC V n select video attribute mode:
+# n = 0 serial field attribute mode
+# n = 1 parallel character attribute mode
+#ESC V 2 n define line attribute:
+# n = 0 single width single height
+# n = 1 single width double height
+# n = 2 double width single height
+# n = 3 double width double height
+#ESC V 3 n select character font:
+# n = 0 system font
+# n = 1 user defined font
+#ESC V 4 n select screen mode:
+# n = 0 page screen mode
+# n = 1 virtual screen mode
+#ESC V 5 n control mouse mode:
+# n = 0 disable mouse
+# n = 1 enable sample mode
+# n = 2 send mouse information
+# n = 3 enable request mode
+#ESC W character delete
+#ESC X clear monitor mode (see ESC U, ESC u)
+#ESC Y erase page to insert char
+#
+#ESC Z n send user/status line:
+# n = 0 send user line
+# n = 1 send status line
+# n = 2 send terminal ID
+#ESC [ p1 p2 p3 set character attribute (parallel char mode):
+# p1: 0 = normal
+# 1 = blank
+# 2 = blink
+# 3 = blink blank (= blank)
+# 4 = reverse
+# 5 = reverse blank
+# 6 = reverse blink
+# 7 = reverse blink blank (= reverse blank)
+# 8 = underline
+# 9 = underline blank
+# : = underline blink
+# ; = underline blink blank
+# < = reverse underline
+# = = reverse underline blank
+# > = reverse underline blink
+# ? = reverse underline blink blank
+# p2, p3: f/grnd, b/grnd colour
+# (see ESC F for colours)
+# use ZZ for mono, eg.
+# ESC [ 0 Z Z for normal
+# ESC [ 4 Z Z for inverse etc.
+#
+#ESC \ n set page size:
+# n = 1 24 lines/page
+# n = 2 48 lines/page
+# n = 3 72 lines/page
+# n = 4 96 lines/page
+#ESC ] n set Wordstar mode:
+# n = 0 normal (KDS7372) mode
+# n = 1 Wordstar mode
+#
+#ESC b set foreground colour screen
+#
+#ESC c n enter self-test mode:
+# n = 0 exit self test mode
+# n = 1 ROM test
+# n = 2 RAM test
+# n = 3 NVRAM test
+# n = 4 screen display test
+# n = 5 main/printer port test
+# n = 6 mouse port test
+# n = 7 graphics board test
+# n = 8 graphics memory test
+# n = 9 display all 'E'
+# n = : display all 'H'
+#ESC d set background colour screen
#
-# Have been manufacturing and reselling various peripherals for a long time
-# They don't make terminals anymore, but are still in business (in 2007).
-# Their e-mail address is at ndsales@newburydata.co.uk
-# and their post address is:
+#ESC e n program insert char (n = insert char)
+#ESC f text CR load user status line with 'text'
#
-# Newbury Data Recording Ltd,
-# Premier Park, Road One,
-# Winsford, Cheshire, CW7 3PT
+#ESC g display user status line on 25th line
+#ESC h display system status line on 25th line
+#ESC i tab
+#ESC j reverse linefeed
+#ESC k n duplex/local edit mode:
+# n = 0 duplex edit mode
+# n = 1 local edit mode
+#ESC l n select virtual screen:
+# n = 0 screen 1
+# n = 1 screen 2
+#ESC m save current config to NVRAM
+#ESC n p1 select display screen:
+# p1 = 0 screen 1
+# p1 = 1 screen 2
+# p1 = 2 screen 3
+# p1 = 3 screen 4
+#ESC o p1 p2 set characters/line and attribute:
+# p1 = 0 80 chars/line
#
-# Their technical support is still good, they sent me for free a printed copy
-# of the 9500 user manual and I got it just 1 week after I first contacted them
-# (in 2005)!
-
-# NDR 9500
-# Manufactured in the early/mid eighties, behaves almost the same as a
-# Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
-# keep the same keyboard layout), add an optional 25-line mode, replace the DIP
-# switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
-# 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
-# recognized: if you type in "ESC !", the next (third) character is not
-# echoed, showing that the terminal was actually waiting for a parameter!
-ndr9500|nd9500|Newbury Data 9500,
- am, bw, hs, mc5i, mir, msgr, ul, xon,
- cols#80, lines#24, wsl#79,
- acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
- clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
- flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
- ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO,
- kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
- kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
- ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
- kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
- kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
- kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
- kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
- kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
- pfloc=\E|%{48}%p1%+%c2%p2\031,
- pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
- rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
- sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
- sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
- tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
-
-ndr9500-nl|NDR 9500 with no status line,
- hs@,
- wsl@,
- dsl@, fsl@, tsl@, use=ndr9500,
-
-ndr9500-25|NDR 9500 with 25th line enabled,
- lines#25, use=ndr9500,
-
-ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
- lines#25, use=ndr9500-nl,
-
-ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
- msgr@,
- xmc#1,
- blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
- sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
- sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
-
-ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
- lines#25, use=ndr9500-mc,
-
-ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
- hs@,
- wsl@,
- dsl@, fsl@, tsl@, use=ndr9500-mc,
-
-ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
- lines#25, use=ndr9500-mc-nl,
-
-#### Perkin-Elmer (Owl)
+#ESC o p1 p2 set characters/line and attribute:
+# p1 = 0 80 chars/line
+# p1 = 1 132 chars/line
+# p2 = 0 single width single height
+# p2 = 1 single width double height
+# p2 = 2 double width single height
+# p2 = 3 double width double height
#
-# These are official terminfo entries from within Perkin-Elmer.
+#ESC q insert mode on
+#ESC r edit mode on
+#ESC s send message all
+#ESC t erase line to null
+#ESC u clear monitor mode (see ESC U, ESC X)
+#ESC v autopage mode on
+#ESC w autopage mode off
+#ESC x p1 p2 p3 define delimiter code...
+#ESC y erase page to null
#
-
-bantam|pe550|pe6100|perkin elmer 550,
- OTbs,
- cols#80, lines#24,
- bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
- el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
-fox|pe1100|perkin elmer 1100,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
- cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
- ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
- home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
-owl|pe1200|perkin elmer 1200,
- OTbs, am, in,
- cols#80, lines#24,
- bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
- cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
- dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
- el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
- hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
- kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
- kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
- rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
-pe1251|pe6300|pe6312|perkin elmer 1251,
- am,
- cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
- bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
- cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
- ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
- kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
- kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
-# (pe7000m: this had
-# rmul=\E!\0, smul=\E!\040,
-# which is probably wrong, it collides with kf0
-pe7000m|perkin elmer 7000 series monochrome monitor,
- am,
- cols#80, lines#24,
- bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
- cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
- ed=\EJ, el=\EI, home=\EH, ind=^J,
- is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
- kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
- kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
- kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
- ll=\ES7\s, ri=\ER,
-pe7000c|perkin elmer 7000 series colour monitor,
- is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
- rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
-
-#### Sperry Univac
+#ESC z 2 p1 p2 p3 p4 draw quadrangle:
+# p1 = starting row
+# p2 = starting column
+# p3 = end row
+# p4 = end column
#
-# Sperry Univac has merged with Burroughs to form Unisys.
+#ESC { p1 p2 p3 p4 configure main port
+# (baud, stop bits, parity, word length)
#
-
-# This entry is for the Sperry UTS30 terminal running the TTY
-# utility under control of CP/M Plus 1R1. The functionality
-# provided is comparable to the DEC vt100.
-# (uts30: I added <rmam>/<smam> based on the init string -- esr)
-uts30|sperry uts30 with cp/m@1R1,
- am, bw, hs,
- cols#80, lines#24, wsl#40,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
- cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
- dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
- ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
- ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
- rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
- rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
- rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
- sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
- smul=\E[4m, tsl=\E], uc=\EPB,
-
-#### Tandem
+#ESC | p1 p2 text Ctrl-Y program function key with 'text':
+# p1 = function key code:
+# '1' - ';' normal f1- f11
+# '<' - 'F' shifted f1 - f11
+# p2 = program mode:
+# 1 = FDX
+# 2 = LOC
+# 3 = HDX
+# Ctrl-Y = terminator
+# (use Ctrl-P to escape ^P, ^Y )
#
-# Tandem builds these things for use with its line of fault-tolerant
-# transaction-processing computers. They aren't generally available
-# on the merchant market, and so are fairly uncommon.
+#ESC } p1 p2 p3 p4 configure printer port
+# (baud, stop bits, parity, word length)
+#ESC ~ send system status
#
-
-tandem6510|adm3a repackaged by Tandem,
- use=adm3a,
-
-# A funny series of terminal that TANDEM uses. The actual model numbers
-# have a fourth digit after 653 that designates minor variants. These are
-# natively block-mode and rather ugly, but they have a character mode which
-# this doubtless(?) exploits. There is a 6520 that is slightly dumber.
-# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
-# removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
-tandem653|t653x|Tandem 653x multipage terminal,
- OTbs, am, da, db, hs,
- cols#80, lines#24, wsl#64, xmc#1,
- clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
- ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
- rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
-
-#### Tandy/Radio Shack
+# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
#
-# Tandy has a line of VDTs distinct from its microcomputers.
+# Entry is by esr going solely on above information and is UNTESTED.
+# This actually looks a lot like a Televideo 9xx.
+# This entry uses page 0 and is monochrome; I'm not brave enough to try
+# to make color work without a test terminal. The <am> capability is a guess.
+# The initialization string sets conversation mode, blinking underline cursor,
+# full duplex, parallel attribute mode, display user status line, white
+# foreground, black background, normal highlight.
#
-
-dmterm|deskmate terminal,
- am, bw,
- cols#80, lines#24,
- bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
- cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
- ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
- kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
- kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
- khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
- lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
- use=adm+sgr,
-dt100|dt-100|Tandy DT-100 terminal,
- xon,
- cols#80, lines#24, xmc#1,
- acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
- clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
- csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
- dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
- il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
- kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
- kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
- knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
- lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
-dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
- cols#132, use=dt100,
-dt110|Tandy DT-110 emulating ansi,
- xon,
+icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
+ OTbs, am, hs,
cols#80, lines#24,
- acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
- clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
- dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
- ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
- kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
- kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
- khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
- lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
- lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
- smacs=^N, smso=\E[7m, smul=\E[4m,
-pt210|TRS-80 PT-210 printing terminal,
- hc, os,
- cols#80,
- bel=^G, cr=^M, cud1=^J, ind=^J,
+ bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
+ cnorm=\E.3, cr=\r, csr=\E!%p1%{32}%+%c%p2%{32}%+%c,
+ cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
+ cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
+ hts=\E1, il1=\EE, invis=\E[1ZZ,
+ is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
+ rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
+ rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
+ sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?
+ %p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
+ sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
+icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
+ rs2=\Eo1, use=icl6404,
-#### Tektronix (tek)
+#### Interactive Systems Corp
#
-# Tektronix tubes are graphics terminals. Most of them use modified
-# oscilloscope technology incorporating a long-persistence green phosphor,
-# and support vector graphics on a main screen with an attached "dialogue
-# area" for interactive text.
+# ISC used to sell OEMed and customized hardware to support ISC UNIX.
+# ISC UNIX still exists in 1995, but ISC itself is no more; they got
+# bought out by Sun.
#
-tek|tek4012|tektronix 4012,
- OTbs, os,
- cols#75, lines#35,
- bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
- ff=\014$<1000>, is2=\E^O,
-# (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
-tek4013|tektronix 4013,
- acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
-tek4014|tektronix 4014,
- cols#81, lines#38,
- is2=\E\017\E9, use=tek4012,
-# (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
-tek4015|tektronix 4015,
- acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
-tek4014-sm|tektronix 4014 in small font,
- cols#121, lines#58,
- is2=\E\017\E\:, use=tek4014,
-# (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
-tek4015-sm|tektronix 4015 in small font,
- acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
-# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
+# From: <cithep!eric> Wed Sep 16 08:06:44 1981
+# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
+# ":le=^_:" later overridden -- esr)
+intext|Interactive Systems Corporation modified owl 1200,
+ OTbs, am,
+ cols#80, it#8, lines#24, xmc#1,
+ bel=^G, cbt=^Y, clear=\014$<132>, cr=\r, cub1=^H, cud1=\n,
+ cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
+ dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
+ el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=\n, ip=$<5.5*>, kbs=^H,
+ kcub1=^_, kcud1=\n, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
+ kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
+ kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
+ rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
+ smso=^V$\,,
+intext2|intextii|INTERACTIVE modified owl 1251,
+ am, bw, ul,
+ cols#80, lines#24, xmc#0,
+ bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=\r, cub1=\E[D,
+ cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
+ flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
+ hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
+ kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
+ kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
+ kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
+ khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
+ lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
+ lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
+ smul=\E[18 D,
+
+#### Kimtron (abm, kt)
#
-# You need to have "stty nl2" in effect. Some versions of tset(1) know
-# how to set it for you.
+# Kimtron seems to be history, but as March 1998 these people are still
+# offering repair services for Kimtron equipment:
#
-# It's got the Magic Cookie problem around stand-out mode. If you can't
-# live with Magic Cookie, remove the :so: and :se: fields and do without
-# reverse video. If you like reverse video stand-out mode but don't want
-# it to flash, change the letter 'H' to 'P' in the :so: field.
-tek4023|tektronix 4023,
- OTbs, am,
- OTdN#4, cols#80, lines#24, vt#4, xmc#1,
- OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
- cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
- rmso=^_@, smso=^_P,
-# It is recommended that you run the 4025 at 4800 baud or less;
-# various bugs in the terminal appear at 9600. It wedges at the
-# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
-# on keyboard don't work. You have to hit BREAK twice to get
-# one break at any speed - this is a documented feature.
-# Can't use cursor motion because it's memory relative, and
-# because it only works in the workspace, not the monitor.
-# Same for home. Likewise, standout only works in the workspace.
+# Com/Pair Monitor Service
+# 1105 N. Cliff Ave.
+# Sioux Falls, South Dakota 57103
#
-# <el> was commented out since vi and rogue seem to work better
-# simulating it with lots of spaces!
+# WATS voice: 1-800/398-4946
+# POTS fax: +1 605/338-8709
+# POTS voice: +1 605/338-9650
+# Email: <compair@sd.cybernex.net>
+# Internet/Web: <http://www.com-pair.com>
#
-# <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
-# and didn't seem necessary.
+# Kimtron entries include (undocumented) codes for: enter dim mode,
+# enter bold mode, enter reverse mode, turn off all attributes.
#
-tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
- OTbs, am, da, db,
- cols#80, it#8, lines#34, lm#0,
- bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
- cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
- cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
- cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
- dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
- ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
- il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
- ind=^F^J,
- is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
- rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
- smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
-tek4025-17|tek 4025 17 line window,
- lines#17, use=tek4025,
-tek4025-17-ws|tek 4025 17 line window in workspace,
- is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
- rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
- smso=\037att e\r, use=tek4025-17,
-tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
- is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
- rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
-# Tektronix 4025a
-# From: Doug Gwyn <gwyn@brl-smoke.ARPA>
-# The following status modes are assumed for normal operation (replace the
-# initial "!" by whatever the current command character is):
-# !COM 29 # NOTE: changes command character to GS (^])
-# ^]DUP
-# ^]ECH R
-# ^]EOL
-# ^]RSS T
-# ^]SNO N
-# ^]STO 9 17 25 33 41 49 57 65 73
-# Other modes may be set according to communication requirements.
-# If the command character is inadvertently changed, termcap can't restore it.
-# Insert-character cannot be made to work on both top and bottom rows.
-# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
-# There also seems to be a problem with vertical motion, perhaps involving
-# delete/insert-line, following a typed carriage return. This terminal sucks.
-# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
-# work any more. -- esr)
-tek4025a|Tektronix 4025A,
- OTbs, OTpt, am, bw, da, db, xon,
- cols#80, it#8, lines#34,
- bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
- cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
- cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
- cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
- dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
- el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
- il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
- rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
- tbc=\035sto;,
-# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
-# Here's the command file that I use to get rogue to work on the 4025.
-# It should work with any program using the old curses (e.g. it better
-# not try to scroll, or cursor addressing won't work. Also, you can't
-# see the cursor.)
-# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
-tek4025-cr|tek 4025 for curses and rogue,
- OTbs, am,
- cols#80, it#8, lines#33,
- clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
- cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
- is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
- rmcup=\037wor 0, smcup=\037wor 33h,
-# next two lines commented out since curses only allows 128 chars, sigh.
-# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
-# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
-tek4025ex|4025ex|4027ex|tek 4025 w/!,
- is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
- rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
-tek4105|tektronix 4105,
- OTbs, am, mir, msgr, ul, xenl, xt,
- cols#79, it#8, lines#29,
- acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
- clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
- cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
- dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
- il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
- is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
- kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
- rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
- rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
- smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
- smul=\E[=5;<2m, tbc=\E[1g,
-
-# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
-tek4105-30|4015 emulating 30 line vt100,
- am, mir, msgr, xenl, xon,
- cols#80, it#8, lines#30, vt#3,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
- clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C$<2>,
- cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
- cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
- enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
- rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
- rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
- sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
- smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
- use=vt100+fnkeys,
-# Tektronix 4105 from BRL
-# The following setup modes are assumed for normal operation:
-# CODE ansi CRLF no DABUFFER 141
-# DAENABLE yes DALINES 30 DAMODE replace
-# DAVISIBILITY yes ECHO no EDITMARGINS 1 30
-# FLAGGING input INSERTREPLACE replace LFCR no
-# ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
-# SELECTCHARSET G1 0 TABS -2
-# Other setup modes may be set for operator convenience or communication
-# requirements; I recommend
-# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
-# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
-# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
-# GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
-# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
-# PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
-# XMTDELAY 0
-# and factory color maps. After setting these modes, save them with NVSAVE. No
-# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# "IC" cannot be used in combination with "im" & "ei".
-# "tek4105a" is just a guess:
-tek4105a|Tektronix 4105,
- OTbs, OTpt, msgr, xon,
- OTkn#8, cols#80, it#8, lines#30, vt#3,
- acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
- civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
- cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
- il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
- kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
- kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
- lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
- rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
- rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
- rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
- sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+# Kimtron ABM 85 added by Dual Systems
+# (abm85: removed duplicated ":kd=^J:" -- esr)
+abm85|Kimtron ABM 85,
+ OTbs, am, bw, msgr,
+ cols#80, it#8, lines#24, xmc#1,
+ cbt=\EI, clear=\E*, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\Ey, el=\Et, ht=^I,
+ if=/usr/share/tabset/stdcrt, il1=\EE,
+ is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
+ kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
+ rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
+# Kimtron ABM 85H added by Dual Systems.
+# Some notes about the abm85h entries:
+# 1) there are several firmware revs of 85H in the world. Use abm85h-old for
+# firmware revs prior to SP51
+# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
+# abm85e entry if it is in tvi920 emulation mode. They are incompatible
+# in some places and NOT software settable i.e., <is2> can't fix it)
+# 3) In 85h mode, the arrow keys and special functions transmit when
+# the terminal is in dup-edit, and work only locally in local-edit.
+# Vi won't swallow `del char' for instance, but <smcup> turns on
+# dup-edit anyway so that the arrow keys will work right. If the
+# arrow keys don't work the way you like, change <smcup>, <rmcup>, and
+# <is2>. Note that 920E mode does not have software commands to toggle
+# between dup and local edit, so you get whatever was set last on the
+# terminal.
+# 4) <flash> attribute is nice, but seems too slow to work correctly
+# (\Eb<pad>\Ed)
+# 5) Make sure `hidden' attributes are selected. If `embedded' attributes
+# are selected, the <xmc@> entry should be removed.
+# 6) auto new-line should be on (selectable from setup mode only)
+#
+# From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
+abm85h|Kimtron ABM 85H native mode,
+ hs,
+ xmc@,
+ bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
+ fsl=\r, invis@,
+ is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r
+ \EG0\Ed\E.4\El,
+ kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
+ use=abm85,
+abm85e|Kimtron ABM 85H in 920E mode,
+ xmc@,
+ bel=^G, dim=\E), flash@,
+ is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq
+ \Em,
+ rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
+abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
+ xmc@,
+ bel=^G, dim=\E),
+ is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9
+ \EF,
+ rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
+# From: <malman@bbn-vax.arpa>
+# (kt7: removed obsolete :ma=^V^J^L :" -- esr)
+kt7|kimtron model kt-7,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
+ if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
+ kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
+ kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
+ kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
+# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
+# other kt7 entry and the adjacent key capabilities). Removed EE which is
+# identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
+# but we can't figure out what.
+kt7ix|kimtron model kt-7 or 70 in IX mode,
+ am, bw,
+ cols#80, it#8, lines#25,
+ acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
+ civis=\E.0, clear=\E*, cnorm=\E.3, cr=\r, cub1=^H, cud1=^V,
+ cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=\r,
+ home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=\n,
+ is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
+ ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
+ nel=\r\n, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
+ sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
+#### Microdata/MDIS
#
-# Tektronix 4106/4107/4109 from BRL
-# The following setup modes are assumed for normal operation:
-# CODE ansi COLUMNMODE 80 CRLF no
-# DABUFFER 141 DAENABLE yes DALINES 32
-# DAMODE replace DAVISIBILITY yes ECHO no
-# EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
-# LFCR no LOCKKEYBOARD no ORIGINMODE relative
-# PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
-# TABS -2
-# Other setup modes may be set for operator convenience or communication
-# requirements; I recommend
-# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
-# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
-# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
-# GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
-# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
-# PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
-# XMTDELAY 0
-# and factory color maps. After setting these modes, save them with NVSAVE. No
-# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# "IC" cannot be used in combination with "im" & "ei".
-tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
- msgr, xon,
- cols#80, it#8, lines#32, vt#3,
- acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
- civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
- cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
- ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
- il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
- kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
- kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
- kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
- lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
- rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
- rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
- rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
- sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
- smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
-
-# Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
-# 0 selects Tek mode, i.e., \E%!0
-# 1 selects ANSI mode
-# 2 selects ANSI edit-mode
-# 3 selects VT52 mode
+# This was a line of terminals made by McDonnell-Douglas Information Systems.
+# These entries come direct from MDIS documentation. I have edited them only
+# to move primary names of the form p[0-9] * to aliases, and to comment out
+# <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
+# also removed the change history; the last version indicates this is
+# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
#
-# One odd thing about the description (which has been unchanged since the 90s)
-# is that the cursor addressing is using VT52 mode, and a few others use the
-# VT52's non-CSI versions of ANSI, e.g., \EJ.
-tek4107|tek4109|tektronix terminals 4107 4109,
- OTbs, am, mir, msgr, ul, xenl, xt,
- cols#79, it#8, lines#29,
- bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
- bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
- cub1=^H, cud1=^J, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
- dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
- kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
- rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
- sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
- sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
- smul=\E%!1\E[4m$<2>\E%!0,
-# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
-# see the note attached to tek4207.
-tek4207-s|Tektronix 4207 with sysline but no memory,
- eslok, hs,
- dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
- is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
- is2=\E7\E[?6l\E[2K\E[?6h\E8,
- tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
-# The 4110 series may be a wonderful graphics series, but they make the 4025
-# look good for screen editing. In the dialog area, you can't move the cursor
-# off the bottom line. Out of the dialog area, ^K moves it up, but there
-# is no way to scroll.
+# McDonnell Information Systems Terminal Family History
+# =========================================
#
-# Note that there is a floppy for free from Tek that makes the
-# 4112 emulate the vt52 (use the vt52 termcap). There is also
-# an expected enhancement that will use ANSI standard sequences.
+# Prism-1, Prism-2 and P99:
+# Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
#
-# 4112 in non-dialog area pretending to scroll. It really wraps
-# but vi is said to work (more or less) in this mode.
+# Prism-4 and Prism-5:
+# Slightly less ancient range of Microdata terminals. Follow-on from
+# Prism-2, but with many enhancements. P5 has eight display pages.
#
-# 'vi' works reasonably well with this entry.
+# Prism-6:
+# A special terminal for use with library systems, primarily in Germany.
+# Limited numbers. Similar functionality to P5 (except attributes?).
#
-otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
- am,
- cols#80, lines#34,
- bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
- rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
-# The 4112 with the ANSI compatibility enhancement
-tek4112|tek4114|tektronix 4110 series,
- OTbs, am, db,
- cols#80, lines#34,
- cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
- dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
- ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
- rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
-tek4112-nd|4112 not in dialog area,
- OTns,
- cuu1=^K, use=tek4112,
-tek4112-5|4112 in 5 line dialog area,
- lines#5, use=tek4112,
-# (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
-# removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
-# Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
-# previously \0410 and \0411 sequences...I don't *think* they were supposed
-# to be 4-digit octal -- esr)
-tek4113|tektronix 4113 color graphics with 5 line dialog area,
- OTbs, am, da, eo,
- cols#80, lines#5,
- clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
- flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
- is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
-tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
- lines#34,
- is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
-# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
-# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
-# :vb: needs enough delay to let you see the background color being toggled.
-tek4113-nd|tektronix 4113 color graphics with no dialog area,
- OTbs, am, eo,
- cols#80, it#8, lines#34,
- clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
- cvvis=\ELZ\EKA0,
- flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
- home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
- ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
-# This entry is from Tek. Inc. (Brian Biehl)
-# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
-otek4115|Tektronix 4115,
- OTbs, am, da, db, eo,
- cols#80, it#8, lines#34,
- cbt=\E[Z, clear=\E[H\E[2J,
- cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
- cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
- el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
- il1=\E[L,
- is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
- kbs=^H, ri=\EM, rmam=\E[?7l,
- rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
- rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
- smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
- smul=\E[4m,
-tek4115|newer tektronix 4115 entry with more ANSI capabilities,
- am, xon,
- cols#80, lines#34,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
- cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
- ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
- il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
- rmso=\E[m, rmul=\E[m,
- sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
- sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%p1%{1}%+%dd,
-# The tek4125 emulates a vt100 incorrectly - the scrolling region
-# command is ignored. The following entry replaces <csr> with the needed
-# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
-# chokes on; and adds a lot of initialization for the tek dialog area.
-# Note that this entry uses all 34 lines and sets the cursor color to green.
-# Steve Jacobson 8/85
-# (tek4125: there were two "\!"s in the is that I replaced with "\E!";
-# commented out, <smir>=\E1 because there's no <rmir> -- esr)
-tek4125|tektronix 4125,
- lines#34,
- csr@, dl1=\E[1M, il1=\E[1L,
- is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
- rc@, sc@, smkx=\E=, use=vt100,
-
-# From: <jcoker@ucbic>
-# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
-# supplied another, less capable 4107 entry. So we'll use that for 4107 and
-# note that if jcoker wasn't confused you may be able to use this one.
-# I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
-tek4207|Tektronix 4207 graphics terminal with memory,
- am, bw, mir, msgr, ul, xenl,
- cols#80, it#8, lines#32,
- blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
- cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
- el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
- il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
- is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
- kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
- rev=\E[7m, ri=\E[T,
- rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
- rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
- smul=\E[4m, tbc=\E[1g,
-
-# From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
-# (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
-# Tab had been given as \E2I,that must be the tab-set capability -- esr)
-tek4404|tektronix 4404,
- OTbs,
- cols#80, it#8, lines#32,
- blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
- csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
- ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
- rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
- rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
- smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
- smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
-# Some unknown person wrote:
-# I added the is string - straight Unix has ESC ; in the login
-# string which sets a ct8500 into monitor mode (aka 4025 snoopy
-# mode). The is string here cleans up a few things (but not
-# everything).
-ct8500|tektronix ct8500,
- am, bw, da, db,
- cols#80, lines#25,
- bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
- cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
- dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
- il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
- rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
+# Prism-7, Prism-8 and Prism-9:
+# More recent range of MDIS terminals, in which P7 and P8
+# replace the P4 & P5, with added functionality, and P9 is the flagship.
+# The P9 has two emulation modes - P8 and ANSI - and includes a
+# large number of the DEC VT220 control sequences. Both
+# P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
+#
+# Prism-12 and Prism-14:
+# Latest range, functionally very similar to the P9. The P14 has a
+# black-on-white overscanning screen.
+#
+# The terminfo definitions given here are:
+#
+# p2 - Prism-2 (or Prism-1 or P99).
+#
+# p4 - Prism-4 (and older P7s & P8s).
+# p5 - Prism-5 (or Prism-6).
+#
+# p7 - Prism-7.
+# p8 - Prism-8 (in national or multinational mode).
+# p8-w - 132 column version of p8.
+# p9 - Prism-9 in ANSI mode.
+# p9-w - 132 column version of p9.
+# p9-8 - Prism-9 in Prism-8 emulation mode.
+# p9-8-w - As p9-8, but with 132 columns.
+#
+# p12 - Prism-12 in ANSI mode.
+# p12-w - 132 column version of p12.
+# p12-m - Prism-12 in MDC emulation mode.
+# p12-m-w - As p12-m, but with 132 columns.
+# p14 - Prism-14 in ANSI mode.
+# p14-w - 132 column version of p14.
+# p14-m - Prism-14 in MDC emulation mode.
+# p14-m-w - As p14-m, but with 132 columns.
+#
+# p2: Prism-2
+# -----------
+#
+# Includes Prism-1 and basic P99 without SP or MP loaded.
+# The simplest form of Prism-type terminal.
+# Basic cursor movement and clearing operations only.
+# No video attributes.
+# Notes:
+# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
+# value up, followed by backspace.
+#
+prism2|MDC Prism-2,
+ am, bw, msgr,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
+ cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
+ %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
+ cuu1=^Z, ed=\EJ, el=\EK, home=^A,
+ hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
+ %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
+ ind=\n, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
-# Tektronix 4205 terminal.
+# p4: Prism-4
+# -----------
#
-# am is not defined because the wrap around occurs not when the char.
-# is placed in the 80'th column, but when we are attempting to type
-# the 81'st character on the line. (esr: hmm, this is like the vt100
-# version of xenl, perhaps am + xenl would work!)
+# Includes early versions of P7 & P8.
+# Basic family definition for most Prisms (except P2 and P9 ANSI).
+# Notes:
+# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
+# value up, followed by backspace.
+# Cursor key definitions removed because they interfere with vi and csh keys.
#
-# Bold, dim, and standout are simulated by colors and thus not allowed
-# with colors. The tektronix color table is mapped into the RGB color
-# table by setf/setb. All colors are reset to factory specifications by oc.
-# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
-# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
-# interval then maps into pre-defined value.
-tek4205|tektronix 4205,
- ccc, mir, msgr,
- colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
- clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
- ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
- initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
- invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
- kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
- kf7=\ES,
- oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
- op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
- rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
- setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
- setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
- sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
- smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
- smul=\E[4m, tbc=\E[1g,
+prism4|p4|P4|MDC Prism-4,
+ am, bw, hs, mc5i, msgr,
+ cols#80, lines#24, wsl#72, xmc#1,
+ bel=^G, blink=^CB, civis=\035\344, clear=\014$<20>,
+ cnorm=\035\342, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
+ cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?
+ %{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
+ cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
+ fsl=\035\345, home=^A,
+ hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc
+ %=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
+ ind=\n, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
+ rev=^CD, rmso=^C\s, rmul=^C\s,
+ sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}
+ %+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
+ sgr0=^C\s, smso=^CD, smul=^CP, tsl=\035\343,
+ vpa=\013%p1%{32}%+%c,
-#### Teletype (tty)
+# p5: Prism-5
+# -----------
#
-# These are the hardcopy Teletypes from before AT&T bought the company,
-# clattering electromechanical dinosaurs in Bakelite cases that printed on
-# pulpy yellow roll paper. If you remember these you go back a ways.
-# Teletype-branded VDTs are listed in the AT&T section.
+# Same definition as p4. Includes Prism-6 (not tested!).
+# Does not use any multi-page features.
#
-# The earliest UNIXes were designed to use these clunkers; nroff and a few
-# other programs still default to emitting codes for the Model 37.
+prism5|p5|P5|MDC Prism-5,
+ use=p4,
+
+# p7: Prism-7
+# -----------
+#
+# Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
+# Notes:
+# Use p4 for very early models of P7.
+# Rev-index removed; can't send nulls to terminal in 8-bit modes.
#
+prism7|p7|P7|MDC Prism-7,
+ cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
-tty33|tty35|model 33 or 35 teletype,
- hc, os, xon,
- cols#72,
- bel=^G, cr=^M, cud1=^J, ind=^J,
-tty37|model 37 teletype,
- OTbs, hc, os, xon,
- bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
- ind=^J,
+# p8: Prism-8
+# -----------
+#
+# Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
+# Supports national and multinational character sets.
+# Notes:
+# Alternate char set operations only work in multinational mode.
+# Use p4 for very early models of P8.
+# Rev-index removed; can't send nulls to terminal in 8-bit modes.
+# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
+#
+prism8|p8|P8|MDC Prism-8,
+ cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
+ vpa=\E[%i%p1%dd, use=p4,
-# There are known to be at least three flavors of the tty40, all seem more
-# like IBM half duplex forms fillers than ASCII terminals. They have lots of
-# awful braindamage, such as printing a visible newline indicator after each
-# newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
-# braindamaged but has hope and is described here. The 40-4 is a 3270
-# lookalike and beyond hope. The terminal has visible bell but I don't know
-# it - it's null here to prevent it from showing the BL character.
-# There is an \EG in <nl> because of a bug in old vi (if stty says you have
-# a "newline" style terminal (-crmode) vi figures all it needs is nl
-# to get crlf, even if <cr> is not ^M.)
-# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
-tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
- OTbs, xon,
- cols#80, lines#24,
- clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
- cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
- ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
- ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
- kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
- rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
-tty43|model 43 teletype,
- OTbs, am, hc, os, xon,
+# p8-w: Prism-8 in 132 column mode
+# --------------------------------
+#
+# 'Wide' version of p8.
+# Notes:
+# Rev-index removed; can't send nulls to terminal in 8-bit modes.
+#
+prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
cols#132,
- bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
+ is2=\E[<12h\E[<14h, use=p8,
-#### Tymshare
+# p9: Prism-9 in ANSI mode
+# -------------------------
+#
+# The "flagship" model of this generation of terminals.
+# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
+# Notes:
+# Tabs only reset by "reset". Otherwise assumes default (8 cols).
+# Fixes to deal with terminal firmware bugs:
+# . 'ri' uses insert-line since rev index doesn't always
+# . 'sgr0' has extra '0' since esc[m fails
+# . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
+# Not covered in the current definition:
+# . Labels
+# . Programming Fn keys
+# . Graphic characters (defaults correctly to vt100)
+# . Padding values (sets xon)
+# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
#
+prism9|p9|P9|MDC Prism-9 in ANSII mode,
+ am, bw, hs, msgr, xenl, xon,
+ cols#80, it#8, lines#24, vt#3, wsl#72,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
+ clear=^L, cnorm=\E[<4h, cr=\r, csr=\E[%i%p1%d;%p2%d%%v,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+ dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
+ ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
+ ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
+ kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[H, nel=\r\n, prot=\E[32%{, rc=\E[%z,
+ rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m,
+ rs2=\E[&p\E[<12l\E\sF\E[3g\E[9;17;25;33;41;49;57;65;73
+ \sN,
+ sc=\E[%y,
+ sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?
+ %p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
+ sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
+ use=ansi+pp,
-# You can add <is2=\E<> to put this 40-column mode, though I can't
-# for the life of me think why anyone would want to.
-scanset|sc410|sc415|Tymshare Scan Set,
- am, bw, msgr,
- cols#80, lines#24,
- acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
- cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
- cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
- kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
- mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
+# p9-w: Prism-9 in 132 column mode
+# --------------------------------
+#
+# 'Wide' version of p9.
+#
+prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
+ cols#132,
+ is2=\E[&p\E[<12l\E F\E[<14h,
+ rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
-#### Volker-Craig (vc)
+# p9-8: Prism-9 in P8 mode
+# ------------------------
#
-# If you saw a Byte Magazine cover with a terminal on it during the early
-# 1980s, it was probably one of these. Carl Helmers liked them because
-# they could crank 19.2 and were cheap (that is, he liked them until he tried
-# to program one...)
+# P9 terminal in P8 emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
#
+prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
-# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
-# every other linefeed.
-vc303|vc103|vc203|volker-craig 303,
- OTbs, OTns, am,
- cols#80, lines#24,
- bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
- cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
- kcuu1=^N, ll=\017$<1>W,
-vc303a|vc403a|volker-craig 303a,
- clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
- home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
-# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
-vc404|volker-craig 404,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
- cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
- ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
- kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
-vc404-s|volker-craig 404 w/standout mode,
- cud1=^J, rmso=^O, smso=^N, use=vc404,
-# From: <wolfgang@cs.sfu.ca>
-# (vc414: merged in cup/dl1/home from an old vc414h-noxon)
-vc414|vc414h|Volker-Craig 414H in sane escape mode.,
- OTbs, am,
- cols#80, lines#24,
- clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
- cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
- dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
- ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
- kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
- kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
- lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
- rmso=\E^_, smso=\E^Y,
-vc415|volker-craig 415,
- clear=^L, use=vc404,
+# p9-8-w: Prism-9 in P8 and 132 column modes
+# ------------------------------------------
+#
+# P9 terminal in P8 emulation mode and 132 column mode.
+#
+prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
-######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
+# p12: Prism-12 in ANSI mode
+# ---------------------------
+#
+# See p9 definition.
#
+prism12|p12|P12|MDC Prism-12 in ANSI mode,
+ use=p9,
-#### IBM PC and clones
+# p12-w: Prism-12 in 132 column mode
+# ----------------------------------
+#
+# 'Wide' version of p12.
#
+prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
+ use=p9-w,
-# The pcplot IBM-PC terminal emulation program is really messed up. It is
-# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
-# doesn't support scrolling regions, ignores add line commands, and ignores
-# delete line commands. Consequently, the resulting behavior looks like a
-# crude adm3a-type terminal.
-# Steve Jacobson 8/85
-pcplot|pc-plot terminal emulation program,
- xenl@,
- csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
-# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
-# I've found that my KayPro II, running MDM730, continues to emulate an
-# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
-# system the following termcap entry works well:
-# I have noticed a couple of minor glitches, but nothing I can't work
-# around. (I added two capabilities from the BRL entry -- esr)
-kaypro|kaypro2|kaypro II,
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
- el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
+# p12-m: Prism-12 in MDC emulation mode
+# -------------------------------------
+#
+# P12 terminal in MDC emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
+#
+prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
+ use=p9-8,
-# From IBM, Thu May 5 19:35:27 1983
-# (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
-ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
- OTbs, am,
- cols#80, lines#24,
- bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
- cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
+# p12-m-w: Prism-12 in MDC emulation and 132 column modes
+# -------------------------------------------------------
+#
+# P12 terminal in MDC emulation mode and 132 column mode.
+#
+prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
+ use=p9-8-w,
-ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
- OTbs, am, bw, eo, hs, km, msgr, ul,
- cols#80, it#8, lines#24,
- acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
- cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
- home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
- indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
- kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
- kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
- kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
- ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
- rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t30;40%;m,
- sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+# p14: Prism-14 in ANSII mode
+# ---------------------------
+#
+# See p9 definition.
+#
+prism14|p14|P14|MDC Prism-14 in ANSII mode,
+ use=p9,
-#### Apple II
+# p14-w: Prism-14 in 132 column mode
+# ----------------------------------
#
-# Apple II firmware console first, then various 80-column cards and
-# terminal emulators. For two cents I'd toss all these in the UFO file
-# along with the 40-column apple entries.
+# 'Wide' version of p14.
#
+prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
+ use=p9-w,
-# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
-# 'it#8' tells UNIX that you have tabs every 8 columns. This is a
-# function of TIC, not the firmware.
-# The clear key on a IIgs will do something like clear-screen,
-# depending on what you're in.
-appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
- OTbs, am, bw, eo, msgr,
- cols#80, it#8, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
- cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
- home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
- kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
- smso=^O,
-# Apple //e with 80-column card, entry from BRL
-# The modem interface is permitted to discard LF (maybe DC1), otherwise
-# passing characters to the 80-column firmware via COUT (PR#3 assumed).
-# Auto-wrap does not work right due to newline scrolling delay, which also
-# requires that you set "stty cr2".
-# Note: Cursor addressing is only available via the Pascal V1.1 entry,
-# not via the BASIC PR#3 hook. All this nonsense can be avoided only by
-# using a terminal emulation program instead of the built-in firmware.
-apple2e|Apple //e,
- bw, msgr,
- cols#80, lines#24,
- bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
- ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
- is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
- nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
- smso=^O,
-# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
-# 4.20, with incoming and outgoing terminals both on 0, emulation On.
-apple2e-p|Apple //e via Pascal,
- cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
- kcud1=^J, use=apple2e,
-# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
-# Enable DC3/DC1 flow control with "stty ixon -ixany".
-apple-ae|ASCII Express,
- OTbs, am, bw, msgr, nxon, xon,
- cols#80, it#8, lines#24,
- bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
- cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
- home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
- kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
- smso=^O,
-appleII|apple ii plus,
- OTbs, am,
- cols#80, it#8, lines#24,
- clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
- cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
- ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
- is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
- smso=^O,
-# Originally by Gary Ford 21NOV83
-# From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
-apple-80|apple II with smarterm 80 col,
- OTbs, am, bw,
- cols#80, lines#24,
- cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
- cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
- ed=\013$<10*/>, el=\035$<10/>, home=^Y,
-apple-soroc|apple emulating soroc 120,
- am,
- cols#80, lines#24,
- bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
- home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
-# From Peter Harrison, Computer Graphics Lab, San Francisco
-# ucbvax!ucsfmis!harrison .....uucp
-# ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
-# "These two work. If you don't have the inverse video chip for the
-# Apple with videx then remove the :so: and :se: fields."
-# (apple-videx: this used to be called DaleApple -- esr)
-apple-videx|Apple with videx videoterm 80 column board with inverse video,
- OTbs, am, xenl,
- cols#80, it#8, lines#24,
- clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
- cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
- home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
- rmso=^Z2, sgr0=^Z2, smso=^Z3,
-# My system [for reference] : Apple ][+, 64K, Ultraterm display card,
-# Apple Cat ][ 212 modem, + more all
-# controlled by ASCII Express: Pro.
-# From Dave Shaver <isucs1!shaver>
-apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
- OTbs, am, eo, xt,
- cols#80, lines#24,
- acsc=, clear=^L, cuf1=^\,
- cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
- flash=^W35^W06, home=^Y,
- is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
- rmso=^N, smso=^O,
-apple-uterm|Ultraterm for Apple micros,
- OTbs, am, eo, xt,
- cols#80, lines#24,
- acsc=, clear=^L, cuf1=^\,
- cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
- home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
-# from trwrba!bwong (Bradley W. Wong):
+# p14-m: Prism-14 in MDC emulation mode
+# -------------------------------------
#
-# This entry assumes that you are using an apple with the UCSD Pascal
-# language card. SYSTEM.MISCINFO is assumed to be the same as that
-# supplied with the standard apple except that screenwidth should be set
-# using SETUP to 80 columns. Note that the right arrow is not mapped in
-# this termcap entry. This is because that key, on the Apple, transmits
-# a ^U and would thus preempt the more useful "up" function of vi.
+# P14 terminal in MDC emulation mode.
+# Similar to p8 definition.
+# Insertion and deletion operations possible.
#
-# HMH 2/23/81
-apple80p|80-column apple with Pascal card,
- am, bw,
- cols#80, lines#24,
- clear=^Y^L, cuf1=^\\:,
- cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
- home=^Y, kcub1=^H,
+prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
+ use=p9-8,
+
+# p14-m-w: Prism-14 in MDC emulation and 132 column modes
+# -------------------------------------------------------
#
-# Apple II+ equipped with Videx 80 column card
+# P14 terminal in MDC emulation mode and 132 column mode.
#
-# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
-# manually converted by D A Gwyn
+prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
+ use=p9-8-w,
+
+# End of McDonnell Information Systems Prism definitions
+
+# These things were popular in the Pick database community at one time
+# From: George Land <georgeland@aol.com> 24 Sep 1996
+p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
+ am, bw, hs, mir,
+ cols#80, lines#24, ma#1, wsl#78, xmc#1,
+ bel=^G, blink=^CB, clear=^L, cr=\r, cub1=^U, cud1=\n, cuf1=^F,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
+ ed=\EJ, el=\EK, home=^A, ind=\n, invis=^CH, kbs=^H, kcub1=^U,
+ kcud1=\n, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
+ kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
+ kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
+ lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=\n\r,
+ pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
+ smul=^C0,
+
+#### Microterm (act, mime)
#
-# DO NOT use any terminal emulation with this data base, it works directly
-# with the Videx card. This has been tested with vi 1200 baud and works fine.
+# The mime1 entries refer to the Microterm Mime I or Mime II.
+# The default mime is assumed to be in enhanced act iv mode.
#
-# This works great for vi, except I've noticed in pre-R2, ^U will scroll back
-# 1 screen, while in R2 ^U doesn't.
-# For inverse alternate character set add:
-# <smacs>=^O:<rmacs>=^N:
-# (apple-v: added it#8 -- esr)
-apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
- am, xenl,
- cols#80, it#8, lines#24,
- bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
- cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
- cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
- ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
- khome=^Y, rmso=^Z2, smso=^Z3,
-apple-videx3|vapple|Apple II with 80 col card,
+
+# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
+# freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
+# <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
+# since Sytek insists ^S means xoff.
+# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
+act4|microterm|microterm act iv,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<12/>, cr=\r, cub1=^H, cud1=^K, cuf1=^X,
+ cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
+ cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
+ ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
+ il1=\001<2.3*/>, ind=\n, kcub1=^H, kcud1=^K, kcuf1=^X,
+ kcuu1=^Z,
+# The padding on :sr: and :ta: for act5 and mime is a guess and not final.
+# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
+# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
+act5|microterm5|microterm act v,
+ kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
+ use=act4,
+# Mimes using brightness for standout. Half bright is really dim unless
+# you turn up the brightness so far that lines show up on the screen.
+mime-fb|full bright mime1,
+ is2=^S\E, rmso=^S, smso=^Y, use=mime,
+mime-hb|half bright mime1,
+ is2=^Y\E, rmso=^Y, smso=^S, use=mime,
+# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
+# the more plausible ":do=^J:" -- esr)
+# uc was at one time disabled to get around a curses bug, be wary of it
+mime|mime1|mime2|mimei|mimeii|microterm mime1,
+ OTbs, am,
+ cols#80, it#8, lines#24, vt#9,
+ bel=^G, clear=^]^C, cr=\r, cub1=^H, cud1=\n, cuf1=^X,
+ cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
+ cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
+ il1=\001$<80>, ind=\n, is2=^S\E^Q, kcub1=^H, kcud1=^K,
+ kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
+# These termcaps (for mime2a) put the terminal in low intensity mode
+# since high intensity mode is so obnoxious.
+mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
OTbs, am,
cols#80, lines#24,
- clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
- home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
- kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
-#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
-aepro|Apple II+ running ASCII Express Pro--vt52,
+ bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
+ dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
+ il1=\001$<20*>, ind=\n, ip=$<2>, is2=\E), kcub1=^H, kcud1=\n,
+ kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
+ smir=\EE, smso=\E\:, smul=\E6,
+# This is the preferred mode (but ^X can't be used as a kill character)
+mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
OTbs,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=\EL, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
+ dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
+ il1=\001$<20*>, ind=\n, ip=$<2>, is2=^Y, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
+ rmul=\E5, smir=^O, smso=\E8, smul=\E4,
+# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
+mime3a|mime1 emulating 3a,
+ am@,
+ kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
+mime3ax|mime-3ax|mime1 emulating enhanced 3a,
+ it#8,
+ dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
+ use=mime3a,
+# Wed Mar 9 18:53:21 1983
+# We run our terminals at 2400 baud, so there might be some timing problems at
+# higher speeds. The major improvements in this model are the terminal now
+# scrolls down and insert mode works without redrawing the rest of the line
+# to the right of the cursor. This is done with a bit of a kludge using the
+# exit graphics mode to get out of insert, but it does not appear to hurt
+# anything when using vi at least. If you have some users using act4s with
+# programs that use curses and graphics mode this could be a problem.
+mime314|mm314|mime 314,
+ am,
cols#80, lines#24,
- clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
- el=\EK, home=\EH,
-# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
-apple-vm80|ap-vm80|apple with viewmax-80,
- OTbs,
+ clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
+ dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
+ kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
+# Microterm mime 340 from University of Wisconsin
+mm340|mime340|mime 340,
cols#80, lines#24,
- clear=\014$<300/>, cuf1=^\\:,
- cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
- ed=\013$<300/>, el=^], home=\031$<200/>,
+ clear=\032$<12/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
+ el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=\n, is2=\E\,,
+ kbs=^H, kcub1=^H, kcud1=\n, kcuu1=^K, nel=\r\n,
+# This came from University of Wisconsin marked "astro termcap for jooss".
+# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
+# also added <rmam>/<smam> based on the init string -- esr)
+mt4520-rv|micro-term 4520 reverse video,
+ am, hs, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
+ fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+ is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H
+ \E[J,
+ kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
+ ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
+ ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
+ rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
+ sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
+ tbc=\E[g, tsl=\E[25;1H,
-#### Apple Lisa & Macintosh
+# Fri Aug 5 08:11:57 1983
+# This entry works for the ergo 4000 with the following setups:
+# ansi,wraparound,newline disabled, xon/xoff disabled in both
+# setup a & c.
+#
+# WARNING!!! There are multiple versions of ERGO 4000 microcode
+# Be advised that very early versions DO NOT WORK RIGHT !!
+# Microterm does have a ROM exchange program- use it or lose big
+# (ergo400: added <rmam>/<smam> based on the init string -- esr)
+ergo4000|microterm ergo 4000,
+ da, db, msgr,
+ cols#80, lines#66,
+ bel=^G, clear=\E[H\E[2J$<80>, cr=\r, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
+ el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
+ is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
+ lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
+ smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
+ smso=\E[7m$<20>,
+
+#### NCR
+#
+# NCR's terminal group was merged with AT&T's when AT&T bought the company.
+# For what happened to that group, see the ADDS section.
+#
+# There is an NCR4103 terminal that's just a re-badged Wyse-50.
+#
+
+# The following vendor-supplied termcaps were captured from the Boundless
+# Technologies site, 8 March 1998. I removed all-upper-case names that were
+# identical, except for case, to lower-case ones. I also uncommented the acsc
+# capabilities.X
+#
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
+# DEC vt200/300 with color capabilities added.
+ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
+ colors#8, pairs#64,
+ op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ use=ncr260vt300an,
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
+# DEC vt200/300 with color capabilities added.
+ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
+ colors#8, pairs#64,
+ op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ use=ncr260vt300wan,
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
+# DEC vt200/300 with color capabilities added.
+ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
+ colors#8, pairs#64,
+ op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ use=ncr260vt300pp,
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
+# DEC vt200/300 with color capabilities added.
+ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
+ colors#8, pairs#64,
+ op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+ use=ncr260vt300wpp,
+# This definition for ViewPoint supports several attributes. This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies. The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed.
+# Mapping to ASCII character set ('acsc' capability) can also be
+# restored if needed.
+ncr260vppp|NCR 2900_260 viewpoint,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ cols#80, lines#24, nlab#32, xmc#1,
+ acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
+ cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
+ cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
+ dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
+ el=\EK$<2>, fsl=\r, home=\036$<2>, ht=^I, hts=\E1,
+ il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
+ is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
+ \EcC1\Ee7$<100>,
+ kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
+ kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=\n, kcuf1=^F,
+ kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=\002\:\r,
+ kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
+ kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
+ kf20=^B$\r, kf21=^B%^M, kf22=^B&\r, kf23=^B'\r, kf24=^B(\r,
+ kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, kf28=\002\,\r,
+ kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, kf32=^B0\r,
+ kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, kf8=^B8\r,
+ kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, kprt=\EP,
+ ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
+ mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
+ nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
+ rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
+ rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
+ \EcC1\Ee7$<100>,
+ sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
+ smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
+ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
+ cols#132,
+ cup=\Ea%i%p1%dR%p2%dC$<30>,
+ is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
+ \EcC1\Ee7$<100>,
+ rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0
+ \EcC1\Ee7$<100>,
+ use=ncr260vppp,
+ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
+ am, hs, mir, msgr, xenl, xon,
+ cols#80, lines#24, nlab#32,
+ acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+ blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
+ cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
+ cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
+ cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
+ cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
+ cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
+ dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
+ ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
+ fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
+ hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
+ il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
+ invis=\E[8m,
+ is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
+ knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
+ rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
+ rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
+ sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+cvis,
+ use=vt220+keypad,
+ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ use=ncr260vt100an,
+ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
+ is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
+ kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
+ lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
+ rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ smkx=\E=, use=ncr260vt100an,
+ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ use=ncr260vt100pp,
+ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
+ am, hs, mir, msgr, xenl, xon,
+ cols#80, lines#24, nlab#32,
+ acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+ blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
+ cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>,
+ cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>,
+ cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
+ cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
+ cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
+ dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
+ ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
+ fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
+ ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
+ ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
+ is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~,
+ kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
+ kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
+ kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
+ kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
+ kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
+ mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
+ ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
+ rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
+ sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
+ use=vt220+cvis, use=vt220+keypad,
+ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, use=ncr260vt200an,
+ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
+ ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
+ kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
+ use=ncr260vt200an,
+ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<
+ 200>,
+ use=ncr260vt200pp,
+ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
+ am, hs, mir, msgr, xenl, xon,
+ cols#80, lines#24, nlab#32,
+ acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
+ blink=\E[5m, bold=\E[1m, clear=\E[2J\E[1;1H$<20>,
+ cr=\r$<1>, csr=\E[%i%p1%d;%p2%dr$<5>,
+ cub=\E[%p1%dD$<5>, cub1=\E[D$<5>, cud=\E[%p1%dB$<5>,
+ cud1=\E[B$<5>, cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
+ cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
+ cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
+ dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
+ ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
+ fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
+ ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
+ ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
+ is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
+ ;1H\E>$<200>,
+ kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+ kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
+ kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+ kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~,
+ kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~,
+ kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~,
+ kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
+ nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+ rmul=\E[24m,
+ rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
+ ;1H\E>$<200>,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
+ sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
+ smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
+ use=vt220+cvis, use=vt220+keypad,
+ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
+ H$<200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1
+ H$<200>,
+ use=ncr260vt300an,
+ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
+ ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
+ kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
+ use=ncr260vt300an,
+NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
+ cols#132,
+ cup=\E[%i%p1%d;%p2%dH$<30>,
+ is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
+ ;1H\E>$<200>,
+ rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1
+ ;1H\E>$<200>,
+ use=ncr260vt300pp,
+# This terminfo file contains color capabilities for the Wyse325 emulation of
+# the NCR 2900/260C color terminal. Because of the structure of the command
+# (escape sequence) used to set color attributes, one of the fore/background
+# colors must be preset to a given value. I have set the background color to
+# black. The user can change this setup by altering the last section of the
+# 'setf' definition. The escape sequence to set color attributes is
+# ESC d y <foreground_color> <background_color> 1
+# In addition, the background color can be changed through the desk accessories.
+# The capability 'op' sets colors to green on black (default combination).
#
-
-# (lisa: changed <cvvis> to <cnorm> -- esr)
-lisa|apple lisa console display (black on white),
- OTbs, am, eo, msgr,
- cols#88, it#8, lines#32,
- acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
- cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
- ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
- is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
-liswb|apple lisa console display (white on black),
- is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
- smso=\E[m, smul=\E[4m, use=lisa,
-
-# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
-# <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
+# NOTE: The NCR Unix System Administrator's Shell will not function properly
+# if the 'pairs' capability is defined. Un-Comment the 'pairs'
+# capability and recompile if you wish to have it included.
#
-# These entries assume that the 'Auto Wraparound' is enabled.
-# Xon-Xoff flow control should also be enabled.
+ncr260wy325pp|NCR 2900_260 wyse 325,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ colors#16, cols#80, lines#24, ncv#33, nlab#32,
+ acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
+ cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=\r,
+ cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
+ cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
+ ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<5>, ht=^I,
+ hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
+ is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
+ \Ee7$<100>,
+ kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
+ kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
+ kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
+ kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
+ kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
+ kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
+ kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
+ kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
+ kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
+ mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
+ nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
+ rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
+ rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
+ \Ee7$<100>,
+ setb=\s,
+ setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
+ %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
+ %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}
+ %e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t
+ %{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=
+ %t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
+ sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
+ smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
+ tsl=\EF,
+ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
+ cols#132,
+ cup=\Ea%i%p1%dR%p2%dC$<30>,
+ is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
+ \Ee7$<100>,
+ rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
+ \Ee7$<100>,
+ use=ncr260wy325pp,
+# This definition for Wyse 350 supports several attributes. This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies. The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed.
+# Mapping to ASCII character set ('acsc' capability) can also be
+# restored if needed.
+# In addition, color capabilities have been added to this file. The drawback,
+# however, is that the background color has to be black. The foreground colors
+# are numbered 0 through 15.
#
-# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
-# settings are in non-volatile memory and don't need to be reset upon login.
-# Also setting the number of columns glitches the screen annoyingly.
-# You can type "reset" to get them set.
+# NOTE: The NCR Unix System Administrator's Shell does not function properly
+# with the 'pairs' capability defined as below. If you wish to
+# have it included, Un-comment it and recompile (using 'tic').
#
-lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
- OTbs, OTpt, am, xenl, xon,
- OTkn#4, cols#80, it#8, lines#24, vt#3,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
- el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
- kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
- kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
- rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
- rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
- sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
- tbc=\E[3g,
-# Lisaterm in 132 column ("wide") mode.
-lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
+ncr260wy350pp|NCR 2900_260 wyse 350,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
+ acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
+ cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
+ cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
+ cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
+ ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<10>, ht=^I,
+ hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
+ is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
+ \Ee7$<100>,
+ kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
+ kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
+ kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
+ kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
+ kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
+ kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
+ kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
+ kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
+ khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
+ mc0=\EP$<10>, mc4=^T, mc5=^R,
+ mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
+ nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
+ rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
+ rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9
+ \Ee7$<100>,
+ setb=\s,
+ setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}
+ %e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}
+ %e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}
+ %e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t
+ %{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1
+ %{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
+ sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
+ smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
+ tsl=\EF,
+ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
+ cols#132,
+ cup=\Ea%i%p1%dR%p2%dC$<30>,
+ is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
+ \Ee7$<200>,
+ rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9
+ \Ee7$<200>,
+ use=ncr260wy350pp,
+# This definition for Wyse 50+ supports several attributes. This means
+# that it has magic cookies (extra spaces where the attributes begin).
+# Some applications do not function well with magic cookies. The System
+# Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
+# If supporting various attributes is not vital, 'xmc#1' and the extra
+# attributes can be removed.
+# Mapping to ASCII character set ('acsc' capability) can also be
+# restored if needed.
+# (ncr260wy50+pp: originally contained commented-out
+# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
+ncr260wy50+pp|NCR 2900_260 wyse 50+,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ cols#80, lines#24, nlab#32, xmc#1,
+ acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
+ cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=\r,
+ cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
+ cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
+ ed=\EY$<5>, el=\ET$<5>, fsl=\r, home=\036$<10>,
+ ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
+ invis=\EG1,
+ is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
+ \Ee4\Ex@\E`9\Ee7$<100>,
+ kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
+ kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=\n, kcuf1=^L,
+ kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
+ kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
+ kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
+ kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
+ kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
+ kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
+ khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
+ mc0=\EP$<10>, mc4=^T, mc5=^R,
+ mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
+ nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
+ rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
+ rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
+ \Ee4\Ex@\E`9\Ee7$<100>,
+ sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
+ smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
+ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
+ cols#132,
+ cup=\Ea%i%p1%dR%p2%dC$<30>,
+ is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
+ \Ee4\Ex@\E`9\Ee7$<200>,
+ rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
+ \Ee4\Ex@\E`9\Ee7$<200>,
+ use=ncr260wy50+pp,
+ncr260wy60pp|NCR 2900_260 wyse 60,
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ cols#80, lines#24, nlab#32,
+ acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
+ cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
+ cr=\r, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
+ cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
+ ed=\Ey$<5>, el=\Et$<5>, fsl=\r, home=\036$<25>,
+ ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
+ invis=\EG1,
+ is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
+ \Ee4\Ex@\E`9\Ee7$<100>,
+ kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
+ kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
+ kcbt=\EI$<15>, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
+ kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+ kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
+ kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
+ kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
+ kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
+ mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
+ nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
+ rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
+ rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"
+ \Ee4\Ex@\E`9\Ee7$<100>,
+ sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
+ smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
+ tsl=\EF,
+ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
+ cols#132,
+ cup=\Ea%i%p1%dR%p2%dC$<30>,
+ is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
+ \Ee4\Ex@\E`9\Ee7$<100>,
+ rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"
+ \Ee4\Ex@\E`9\Ee7$<100>,
+ use=ncr260wy60pp,
+ncr160vppp|NCR 2900_160 viewpoint,
+ use=ncr260vppp,
+ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
+ use=ncr260vpwpp,
+ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
+ use=ncr260vt100an,
+ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
+ use=ncr260vt100pp,
+ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
+ use=ncr260vt100wan,
+ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
+ use=ncr260vt100wpp,
+ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
+ use=ncr260vt200an,
+ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
+ use=ncr260vt200pp,
+ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
+ use=ncr260vt200wan,
+ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
+ use=ncr260vt200wpp,
+ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
+ use=ncr260vt300an,
+ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
+ use=ncr260vt300pp,
+ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
+ use=ncr260vt300wan,
+ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
+ use=ncr260vt300wpp,
+ncr160wy50+pp|NCR 2900_160 wyse 50+,
+ use=ncr260wy50+pp,
+ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
+ use=ncr260wy50+wpp,
+ncr160wy60pp|NCR 2900_160 wyse 60,
+ use=ncr260wy60pp,
+ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
+ use=ncr260wy60wpp,
+ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
+ am, hs, mc5i, mir, msgr, xon,
+ cols#80, it#8, lines#24, nlab#32,
+ acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
+ bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
+ clear=\E[2J\E[1;1H$<300>, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
+ cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
+ cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
+ cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
+ dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
+ ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
+ enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
+ ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
+ ind=\ED,
+ is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
+ kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=\r, kf1=\EOP,
+ kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
+ rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
+ rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
+ rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(
+ B\E)0\E%/0n\E[P\031$<200>,
+ sc=\E7,
+ sgr=%?%p9%t\016%e\017%;\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1
+ %p3%|%t;7%;%?%p4%t;5%;m$<120>,
+ sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
+ smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
+ tsl=\E[>+1$<70>,
+ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
cols#132,
- kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
-# Although MacTerminal has insert/delete line, it is commented out here
-# since it is much faster and cleaner to use the "lock scrolling region"
-# method of inserting and deleting lines due to the MacTerminal implementation.
-# Also, the "Insert/delete ch" strings have an extra character appended to them
-# due to a bug in MacTerminal V1.1. Blink is disabled since it is not
-# supported by MacTerminal.
-mac|macintosh|Macintosh with MacTerminal,
- xenl,
- OTdN#30,
- blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
-# Lisaterm in 132 column ("wide") mode.
-mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
- cols#132, use=mac,
-
-# nsterm*|Apple_Terminal - AppKit Terminal.app
-#
-# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
-# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
-# Server and Mac OS X operating systems. There is also a
-# "terminal.app" in GNUStep, but I believe it to be an unrelated
-# codebase and I have not attempted to describe it here.
-#
-# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
-# are pretty much on your own. Use "nsterm-7-m" and hope for the best.
-# You might also try "nsterm-7" and "nsterm-old" if you suspect your
-# version supports color.
-#
-# To determine the version of Terminal.app you're using by running:
-#
-# echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
-#
-# For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
-#
-# For Apple_Terminal v71+/v100+, use "nsterm-bce".
-#
-# For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
-#
-# For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
-#
-# For all earlier versions (Apple_Terminal), try "nsterm-7-m"
-# (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
-# might work too, but really you're on your own here since these
-# systems are very obsolete and I can't test them. I do welcome
-# patches, though :).
-
-# Other Terminals:
-#
-# For GNUstep_Terminal, you're probably best off using "linux" or
-# writing your own terminfo.
-
-# For MacTelnet, you're on your own. It's a different codebase, and
-# seems to be somewhere between "vt102", "ncsa" and "xterm-color".
-
-# For iTerm.app, see "iterm".
-
-#
-# The AppKit Terminal.app descriptions all have names beginning with
-# "nsterm". Note that the statusline (-s) versions use the window
-# titlebar as a phony status line, and may produce warnings during
-# compilation as a result ("tsl uses 0 parameters, expected 1".)
-# Ignore these warnings, or even ignore these entries entirely. Apps
-# which need to position the cursor or do other fancy stuff inside the
-# status line won't work with these entries. They're primarily useful
-# for programs like Pine which provide simple notifications in the
-# status line. Please note that non-ASCII characters don't work right
-# in the status line, since Terminal.app incorrectly interprets their
-# Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
-# versions) or only accepts status lines consisting entirely of
-# characters from the first 256 Unicode positions (including C1 but
-# not C0 or DEL.)
-#
-# The Mythology* of AppKit Terminal.app:
-#
-# In the days of NeXTSTep 0.x and 1.x there were two incompatible
-# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
-# shareware replacement for Terminal called "Stuart" which NeXT bought
-# and used as the basis for the Terminal.app in NeXTstep 2+,
-# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
-# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
-# capabilities for the early versions, but I believe that the
-# TERM_PROGRAM_VERSION may have been reset at some point.
-#
-# The early versions were tailored to the NeXT character set. Sometime
-# after the Apple aquisition the encoding was swiched to MacRoman
-# (initally with serious altcharset bugs due to incomplete conversion
-# of the old NeXT code,) and then later to UTF-8. Alos sometime during
-# or just prior to the early days of Mac OS X, the Terminal grew ANSI
-# 8-color support (initially buggy when combined with attributes, but
-# that was later fixed.) More recently, around Mac OS X version 10.3
-# or so (Terminal.app v100+) xterm-like 16-color support was added. In
-# some versions (for instance 133-1 which shipped with Mac OS X
-# version 10.4) this suffered from the <bce> bug, but that seems to
-# have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
-#
-# In the early days of Mac OS X the terminal was fairly buggy and
-# would routinely crash under load. Many of these bugs seem to have
-# been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
-# some may still remain. This change seems to correspond to
-# Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
-# it did previously.
-#
-# * This may correspond with what actually happened, but I don't
-# know. It is based on guesswork, hearsay, private correspondence,
-# my faulty memory, and the following online sources and references:
-#
-# [1] "Three Scotts and a Duane" by Simson L. Garfinkel
-# http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
-#
-# [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
-# https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
-#
-# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
-# "nsterm" to comply with the name length and case conventions and
-# limitations of various software packages [notably Solaris terminfo
-# and UNIX.] A single Apple_Terminal alias is retained for
-# backwards-compatbility.
-#
-# * Added function key support (F1-F4). These only work in Terminal.app
-# version 51, hopefully the capabilities won't cause problems for people
-# using version 41.
-#
-# * Added "full color" (-c) entries which support the 16-color mode in
-# version 51.
+ is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
+ rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B
+ \E)0\E%/0n\E[P\031$<200>,
+ use=ncrvt100an,
#
-# * By default, version 51 uses UTF-8 encoding with broken altcharset
-# support, so "ASCII" (-7) entries without altcharset support were
-# added.
+# Vendor-supplied NCR termcaps end here
-# nsterm - AppKit Terminal.app
-#
-# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
-# Terminal.app. It is a partial VT100 emulation with some xterm-like
-# extensions. This terminfo was written to describe versions 41
-# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
-# version 10.1) of Terminal.app.
-#
-# Terminal.app runs under the Mac OS X Quartz windowing system (and
-# other AppKit-supported windowing systems.) On the Mac OS X machine I
-# use, the executable for Terminal.app is:
-# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
-#
-# If you're looking for a description of the full-screen system
-# console which runs under Apple's Darwin operating system on PowerPC
-# platforms, see the "xnuppc" entry instead.
-#
-# There were no function keys in version 41. In version 51, there are
-# four working function keys (F1, F2, F3 and F4.) The function keys
-# are included in all of these entries.
+# NCR7900 DIP switches:
#
-# It does not support mouse pointer position reporting. Under some
-# circumstances the cursor can be positioned using option-click; this
-# works by comparing the cursor position and the selected position,
-# and simulating enough cursor-key presses to move the cursor to the
-# selected position. This technique fails in all but the simplest
-# applications.
+# Switch A:
+# 1-4 - Baud Rate
+# 5 - Parity (Odd/Even)
+# 6 - Don't Send or Do Send Spaces
+# 7 - Parity Enable
+# 8 - Stop Bits (One/Two)
#
-# It provides partial ANSI color support (background colors interacted
-# badly with bold in version 41, though, as reflected in :ncv:.) The
-# monochrome (-m) entries are useful if you've disabled color support
-# or use a monochrome monitor. The full color (-c) entries are useful
-# in version 51, which doesn't exhibit the background color bug. They
-# also enable an xterm-compatible 16-color mode.
+# Switch B:
+# 1 - Upper/Lower Shift
+# 2 - Typewriter Shift
+# 3 - Half Duplex / Full Duplex
+# 4 - Light/Dark Background
+# 5-6 - Carriage Return Without / With Line Feed
+# 7 - Extended Mode
+# 8 - Suppress Keyboard Display
#
-# The configurable titlebar is set using xterm-compatible sequences;
-# it is used as a status bar in the statusline (-s) entries. Its width
-# depends on font sizes and window sizes, but 50 characters seems to
-# be the default for an 80x24 window.
+# Switch C:
+# 1 - End of line entry disabled/enabled
+# 2 - Conversational mode / (Local?) Mode
+# 3 - Control characters displayed / not displayed
+# 4 - (2-wire?) / 4-wire communications
+# 5 - RTS on and off for each character
+# 6 - (50Hz?) / 60 Hz
+# 7 - Exit after level zero diagnostics
+# 8 - RS-232 interface
#
-# The MacRoman character encoding is used for some of the alternate
-# characters in the "MacRoman" entries; the "ASCII" (-7) entries
-# disable alternate character set support entirely, and the "VT100"
-# (-acs) entries rely instead on Terminal.app's own buggy VT100
-# graphics emulation, which seems to think the character encoding is
-# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
-# are useful in Terminal.app version 51, which supports UTF-8 and
-# other ASCII-compatible character encodings but does not correctly
-# implement VT100 graphics; once VT100 graphics are correctly
-# implemented in Terminal.app, the "VT100" (-acs) entries should be
-# usable in any ASCII-compatible character encoding [except perhaps
-# in UTF-8, where some experts argue for disallowing alternate
-# characters entirely.]
+# Switch D:
+# 1 - Reverse Channel (yes / no)
+# 2 - Manual answer (no / yes)
+# 3-4 - Cursor appearance
+# 5 - Communication Rate
+# 6 - Enable / Disable EXT turnoff
+# 7 - Enable / Disable CR turnoff
+# 8 - Enable / Disable backspace
#
-# Terminal.app reports "vt100" as the terminal type, but exports
-# several environment variables which may aid detection in a shell
-# profile (i.e. .profile or .login):
+# Since each attribute parameter is 0 or 1, we shift each attribute (standout,
+# reverse, blink, dim, and underline) the appropriate number of bits (by
+# multiplying the 0 or 1 by a correct factor to shift) so the bias character,
+# '@' is (effectively) "or"ed with each attribute to generate the proper third
+# character in the <ESC>0 sequence. The <sgr> string implements the following
+# equation:
#
-# TERM=vt100
-# TERM_PROGRAM=Apple_Terminal
-# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41
-# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51
+# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
+# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
#
-# For example, the following Bourne shell script would detect the
-# correct terminal type:
+# Where: P1 <==> Standout attribute parameter
+# P2 <==> Underline attribute parameter
+# P3 <==> Reverse attribute parameter
+# P4 <==> Blink attribute parameter
+# P5 <==> Dim attribute parameter
+# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
+ncr7900i|ncr7900|n7900|ncr 7900 model 1,
+ am, bw, ul,
+ cols#80, lines#24, xmc#1,
+ bel=^G, blink=\E0B, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
+ cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=\n,
+ is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=\n, kcuf1=^F,
+ kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
+ rmul=\E0@,
+ sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
+ %*%+%c,
+ sgr0=\E0@, smso=\E0Q, smul=\E0`,
+ncr7900iv|ncr 7900 model 4,
+ am, bw, eslok, hs,
+ cols#80, lines#24,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n,
+ cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
+ fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=\n, kbs=^H,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
+ kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
+ khome=\EH, lf6=blue, lf7=red, lf8=white, nel=\r\n,
+ tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
+# Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
+# The user can enter a CTRL-B to get out of this locked state.
+# In <hpa>, we want to output the character given by the formula:
+# ((col / 10) * 16) + (col % 10) where "col" is "p1"
+ncr7901|ncr 7901 model,
+ am, bw, ul,
+ cols#80, lines#24,
+ bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=\r,
+ cub1=^H, cud1=\n, cuf1=^F,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
+ ed=\Ek, el=\EK,
+ hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=\n,
+ is2=\E4^O, kclr=^L, kcub1=^U, kcud1=\n, kcuf1=^F, kcuu1=^Z,
+ khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
+ sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}
+ %*%+%c\016,
+ sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
+ vpa=\013%p1%{64}%+%c,
+
+# Newbury Data Recording Limited (Newbury Data)
#
-# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
-# then
-# export TERM
-# if [ :"$TERM_PROGRAM_VERSION" = :41 ]
-# then
-# TERM="nsterm-old"
-# else
-# TERM="nsterm-c-7"
-# fi
-# fi
+# Have been manufacturing and reselling various peripherals for a long time
+# They don't make terminals anymore, but are still in business (in 2007).
+# Their e-mail address is at ndsales@newburydata.co.uk
+# and their post address is:
#
-# In a C shell derivative, this would be accomplished by:
+# Newbury Data Recording Ltd,
+# Premier Park, Road One,
+# Winsford, Cheshire, CW7 3PT
#
-# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
-# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
-# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
-# setenv TERM "nsterm-old"
-# else
-# setenv TERM "nsterm-c-7"
-# endif
-# endif
-# endif
-
-# The '+' entries are building blocks
-nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
- am, bw, msgr, xenl, xon,
- cols#80, it#8, lines#24,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
- invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
- kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
- rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
- sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
-
-nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- enacs=\E(B\E)0, rmacs=^O,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, use=nsterm+7,
-
-nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
- acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245,
- enacs=\E(B\E)0, rmacs=^O,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, use=nsterm+7,
-
-# compare with xterm+sl-twm
-nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
- hs,
- wsl#50,
- dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
-
-nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
- op=\E[0m, use=ibm+16color,
-
-nsterm+c41|AppKit Terminal.app v41 color support,
- colors#8, ncv#37, pairs#64,
- op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-
-# These are different combinations of the building blocks
-
-# ASCII charset (-7)
-nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
- use=nsterm+7,
-
-nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
- use=nsterm+s, use=nsterm+7,
-
-nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
- use=nsterm+c41, use=nsterm+7,
-
-nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
- use=nsterm+c, use=nsterm+7,
-
-nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
- use=nsterm+s, use=nsterm+c41, use=nsterm+7,
-
-nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
- use=nsterm+s, use=nsterm+c, use=nsterm+7,
-
-# VT100 alternate-charset (-acs)
-nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
- use=nsterm+acs,
-
-nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
- use=nsterm+s, use=nsterm+acs,
+# Their technical support is still good, they sent me for free a printed copy
+# of the 9500 user manual and I got it just 1 week after I first contacted them
+# (in 2005)!
-nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
- use=nsterm+c41, use=nsterm+acs,
+# NDR 9500
+# Manufactured in the early/mid eighties, behaves almost the same as a
+# Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but
+# keep the same keyboard layout), add an optional 25-line mode, replace the DIP
+# switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC !
+# 2), here is the NDR 9500. Even the line-lock, albeit disabled, is
+# recognized: if you type in "ESC !", the next (third) character is not
+# echoed, showing that the terminal was actually waiting for a parameter!
+ndr9500|nd9500|Newbury Data 9500,
+ am, bw, hs, mc5i, mir, msgr, ul, xon,
+ cols#80, lines#24, wsl#79,
+ acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
+ clear=\E;, cnorm=\E.1, cr=\r, cub1=^H, cud1=^V, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
+ dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
+ flash=\Eb$<50/>\Ed, fsl=\r, home=^^, ht=^I, hts=\E1,
+ ich1=\EQ, il1=\EE, ind=\n, is2=\Ew\E'\EDF\El\Er\EO,
+ kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z,
+ kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
+ ked=\EY, kel=\ET, kent=\r, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r,
+ kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r,
+ kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
+ kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
+ kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_,
+ pfloc=\E|%{48}%p1%+%c2%p2%s\031,
+ pfx=\E|%{48}%p1%+%c1%p2%s\031, prot=\E), ri=\Ej,
+ rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
+ sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
+ sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
+ tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
-nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
- use=nsterm+c, use=nsterm+acs,
+ndr9500-nl|NDR 9500 with no status line,
+ hs@,
+ wsl@,
+ dsl@, fsl@, tsl@, use=ndr9500,
-nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
- use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
+ndr9500-25|NDR 9500 with 25th line enabled,
+ lines#25, use=ndr9500,
-nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
- use=nsterm+s, use=nsterm+c, use=nsterm+acs,
+ndr9500-25-nl|NDR 9500 with 25 lines and no status line,
+ lines#25, use=ndr9500-nl,
-# MacRoman charset
-nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
- use=nsterm+mac,
+ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink),
+ msgr@,
+ xmc#1,
+ blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0,
+ sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}
+ %+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c,
+ sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500,
-nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
- use=nsterm+s, use=nsterm+mac,
+ndr9500-25-mc|NDR 500 with 25 lines and magic cookies,
+ lines#25, use=ndr9500-mc,
-nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
- use=nsterm+c41, use=nsterm+mac,
+ndr9500-mc-nl|NDR 9500 with magic cookies and no status line,
+ hs@,
+ wsl@,
+ dsl@, fsl@, tsl@, use=ndr9500-mc,
-nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
- use=nsterm+c, use=nsterm+mac,
+ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line,
+ lines#25, use=ndr9500-mc-nl,
-nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
- use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
+#### Perkin-Elmer (Owl)
+#
+# These are official terminfo entries from within Perkin-Elmer.
+#
-nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
- use=nsterm+s, use=nsterm+c, use=nsterm+mac,
+bantam|pe550|pe6100|perkin elmer 550,
+ OTbs,
+ cols#80, lines#24,
+ bel=^G, clear=\EK$<20>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
+ el=\EI$<20>, home=\EH, ind=\n, ll=\EH\EA,
+fox|pe1100|perkin elmer 1100,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
+ cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
+ ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
+ home=\EH, hts=\E1, ind=\n, ll=\EH\EA, tbc=\E3,
+owl|pe1200|perkin elmer 1200,
+ OTbs, am, in,
+ cols#80, lines#24,
+ bel=^G, clear=\EH\EJ$<132>, cr=\r, cub1=^H, cud1=\n,
+ cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
+ dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
+ el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
+ hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=\n, ip=$<5.5*>,
+ kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
+ kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
+ rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
+pe1251|pe6300|pe6312|perkin elmer 1251,
+ am,
+ cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
+ bel=^G, clear=\EK$<332>, cr=\r, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
+ ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=\n,
+ kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
+ kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
+# (pe7000m: this had
+# rmul=\E!\0, smul=\E!\040,
+# which is probably wrong, it collides with kf0
+pe7000m|perkin elmer 7000 series monochrome monitor,
+ am,
+ cols#80, lines#24,
+ bel=^G, cbt=\E!Y, clear=\EK, cr=\r, cub1=\ED, cud1=\EB,
+ cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
+ ed=\EJ, el=\EI, home=\EH, ind=\n,
+ is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
+ kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
+ kf10=\E!\n, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
+ kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
+ ll=\ES7\s, ri=\ER,
+pe7000c|perkin elmer 7000 series colour monitor,
+ is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
+ rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
-# In Mac OS X version 10.5 the format of the preferences has changed
-# and a new, more complex technique is needed, e.g.,
+#### Sperry Univac
#
-# python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
-# "NSUserDefaults");ud=NSUserDefaults.alloc();
-# ud.init();prefs=ud.persistentDomainForName_(
-# "com.apple.Terminal");prefs["Window Settings"][
-# prefs["Default Window Settings"]]["TerminalType"
-# ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
-# "com.apple.Terminal")' nsterm-16color
+# Sperry Univac has merged with Burroughs to form Unisys.
#
-# and it is still not settable from the preferences dialog. This is
-# tracked under rdar://problem/7365108 and rdar://problem/7365134
-# in Apple's bug reporter.
-nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
- bw@, mir, npc,
- civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
- flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
- ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
- kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
- kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
- kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
- kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
- knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
- smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
- use=nsterm-c-s-acs,
-# The versions of Terminal.app in Mac OS X version 10.3.x seem to have
-# the background color erase bug. The newer version 240.2 in Mac OS X
-# version 10.5 does not.
+# This entry is for the Sperry UTS30 terminal running the TTY
+# utility under control of CP/M Plus 1R1. The functionality
+# provided is comparable to the DEC vt100.
+# (uts30: I added <rmam>/<smam> based on the init string -- esr)
+uts30|sperry uts30 with cp/m@1R1,
+ am, bw, hs,
+ cols#80, lines#24, wsl#40,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
+ cnorm=\ES, cr=\r, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
+ dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=\r, home=\E[H,
+ ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
+ ind=\n, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
+ rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
+ rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
+ rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+ sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
+ smul=\E[4m, tsl=\E], uc=\EPB,
+
+#### Tandem
#
-# This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
-# and D P Schreber comparing to nsterm-c-s-acs.
+# Tandem builds these things for use with its line of fault-tolerant
+# transaction-processing computers. They aren't generally available
+# on the merchant market, and so are fairly uncommon.
#
-# In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
-# can be set in Terminal.app, e.g.,
+
+tandem6510|adm3a repackaged by Tandem,
+ use=adm3a,
+
+# A funny series of terminal that TANDEM uses. The actual model numbers
+# have a fourth digit after 653 that designates minor variants. These are
+# natively block-mode and rather ugly, but they have a character mode which
+# this doubtless(?) exploits. There is a 6520 that is slightly dumber.
+# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
+# removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
+tandem653|t653x|Tandem 653x multipage terminal,
+ OTbs, am, da, db, hs,
+ cols#80, lines#24, wsl#64, xmc#1,
+ clear=\EI, cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
+ ed=\EJ, el=\EK, fsl=\r, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
+ rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
+
+#### Tandy/Radio Shack
#
-# defaults write com.apple.Terminal TermCapString nsterm-bce
+# Tandy has a line of VDTs distinct from its microcomputers.
#
-# and that it is not set in Terminal's preferences dialog.
-nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
- bce, bw, use=nsterm-16color,
-# This is an alias which should always point to the "current" version
-nsterm|Apple_Terminal|AppKit Terminal.app,
- use=nsterm-16color,
-
-# iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
-# more featureful) terminal emulator for Mac OS X. It is similar
-# enough in capabilities to nsterm-16color that I have derived this
-# description from that one, but as far as I know they share no code.
-# Many of the features are user-configurable, but I attempt only to
-# describe the default configuration.
-#
-# NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
-# disabled.
-iTerm.app|iTerm.app terminal emulator for Mac OS X,
- bce, bw@, ccc@,
- csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color,
- use=nsterm-16color,
+dmterm|deskmate terminal,
+ am, bw,
+ cols#80, lines#24,
+ bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=\r, cub1=^H,
+ cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
+ ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
+ kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
+ kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
+ khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
+ lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
+ use=adm+sgr,
+dt100|dt-100|Tandy DT-100 terminal,
+ xon,
+ cols#80, lines#24, xmc#1,
+ acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J,
+ cr=\r, csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ ich1=\E[@, il1=\E[L, ind=\n, is2=\E[?3l\E)0\E(B,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
+ kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
+ kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
+ knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
+ lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
+ use=vt220+cvis,
+dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
+ cols#132, use=dt100,
+dt110|Tandy DT-110 emulating ansi,
+ xon,
+ cols#80, lines#24,
+ acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, clear=\E[H\E[2J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ dch1=\E[0P, dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0,
+ home=\E[H, ht=^I, ich1=\E[0@, il1=\E[0L, ind=\n,
+ is2=\E[?3l\E)0\E(B, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kend=\E[K, kf1=\E[1~, kf10=\E[10~, kf2=\E[2~,
+ kf3=\E[3~, kf4=\E[4~, kf5=\E[5~, kf6=\E[6~, kf7=\E[7~,
+ kf8=\E[8~, kf9=\E[9~, khome=\E[G, kich1=\E[@, knp=\E[26~,
+ kpp=\E[25~, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
+ lf6=f7, lf7=f8, lf8=f9, lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
+ use=vt220+cvis,
+pt210|TRS-80 PT-210 printing terminal,
+ hc, os,
+ cols#80,
+ bel=^G, cr=\r, cud1=\n, ind=\n,
-# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
+#### Tektronix (tek)
#
-# On PowerPC platforms, Apple's Darwin operating system uses a
-# full-screen system console derived from a NetBSD framebuffer
-# console. It is an ANSI-style terminal, and is not really VT-100
-# compatible.
+# Tektronix tubes are graphics terminals. Most of them use modified
+# oscilloscope technology incorporating a long-persistence green phosphor,
+# and support vector graphics on a main screen with an attached "dialogue
+# area" for interactive text.
#
-# Under Mac OS X, this is the system console driver used while in
-# single-user mode [reachable by holding down Command-S during the
-# boot process] and when logged in using console mode [reachable by
-# typing ">console" at the graphical login prompt.]
+
+tek|tek4012|tektronix 4012,
+ OTbs, os,
+ cols#75, lines#35,
+ bel=^G, clear=\E\014$<1000>, cr=\r, cub1=^H, cud1=\n,
+ ff=\014$<1000>, is2=\E^O,
+# (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+tek4013|tektronix 4013,
+ acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
+tek4014|tektronix 4014,
+ cols#81, lines#38,
+ is2=\E\017\E9, use=tek4012,
+# (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+tek4015|tektronix 4015,
+ acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
+tek4014-sm|tektronix 4014 in small font,
+ cols#121, lines#58,
+ is2=\E\017\E\:, use=tek4014,
+# (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
+tek4015-sm|tektronix 4015 in small font,
+ acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
+# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
#
-# If you're looking for a description of the Terminal.app terminal
-# emulator which runs under the Mac OS X Quartz windowing system (and
-# other AppKit-supported windowing systems,) see the "nsterm"
-# entry instead.
+# You need to have "stty nl2" in effect. Some versions of tset(1) know
+# how to set it for you.
#
-# NOTE: Under Mac OS X version 10.1, the default login window does not
-# prompt for user name, instead requiring an icon to be selected from
-# a list of known users. Since the special ">console" login is not in
-# this list, you must make one of two changes in the Login Window
-# panel of the Login section of System Prefs to make the special
-# ">console" login accessible. The first option is to enable 'Show
-# "Other User" in list for network users', which will add a special
-# "Other..." icon to the graphical login panel. Selecting "Other..."
-# will present the regular graphical login prompt. The second option
-# is to change the 'Display Login Window as:' setting to 'Name and
-# password entry fields', which replaces the login panel with a
-# graphical login prompt.
+# It's got the Magic Cookie problem around stand-out mode. If you can't
+# live with Magic Cookie, remove the :so: and :se: fields and do without
+# reverse video. If you like reverse video stand-out mode but don't want
+# it to flash, change the letter 'H' to 'P' in the :so: field.
+tek4023|tektronix 4023,
+ OTbs, am,
+ OTdN#4, cols#80, lines#24, vt#4, xmc#1,
+ OTnl=\n, bel=^G, clear=\E\014$<4/>, cr=\r, cub1=^H, cud1=\n,
+ cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
+ rmso=^_@, smso=^_P,
+# It is recommended that you run the 4025 at 4800 baud or less;
+# various bugs in the terminal appear at 9600. It wedges at the
+# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
+# on keyboard don't work. You have to hit BREAK twice to get
+# one break at any speed - this is a documented feature.
+# Can't use cursor motion because it's memory relative, and
+# because it only works in the workspace, not the monitor.
+# Same for home. Likewise, standout only works in the workspace.
#
-# There are no function keys, at least not in Darwin 1.3.
+# <el> was commented out since vi and rogue seem to work better
+# simulating it with lots of spaces!
#
-# It has no mouse support.
+# <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
+# and didn't seem necessary.
#
-# It has full ANSI color support, and color combines correctly with
-# all three supported attributes: bold, inverse-video and underline.
-# However, bold colored text is almost unreadable (bolding is
-# accomplished using shifting and or-ing, and looks smeared) so bold
-# has been excluded from the list of color-compatible attributes
-# [using (ncv)]. The monochrome entry (-m) is useful if you use a
-# monochrome monitor.
+tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
+ OTbs, am, da, db,
+ cols#80, it#8, lines#34, lm#0,
+ bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=\r,
+ cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
+ cud1=^F\n, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
+ cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
+ dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
+ ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
+ il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
+ ind=^F\n,
+ is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
+ rmkx=\037lea\sp2\r\037lea\sp4\r\037lea\sp6\r\037lea\sp8\r
+ \037lea\sf5\r,
+ smkx=\037lea\sp4\s/h/\r\037lea\sp8\s/k/\r\037lea\sp6\s/\s/
+ \r\037lea\sp2\s/j/\r\037lea\sf5\s/H/\r,
+tek4025-17|tek 4025 17 line window,
+ lines#17, use=tek4025,
+tek4025-17-ws|tek 4025 17 line window in workspace,
+ is2=!com\s31\r\n\037sto\s9\s17\s25\s33\s41\s49\s57\s65\s73
+ \r\037wor\s17\r\037mon\s17\r,
+ rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
+ smso=\037att e\r, use=tek4025-17,
+tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
+ is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
+ rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
+# Tektronix 4025a
+# From: Doug Gwyn <gwyn@brl-smoke.ARPA>
+# The following status modes are assumed for normal operation (replace the
+# initial "!" by whatever the current command character is):
+# !COM 29 # NOTE: changes command character to GS (^])
+# ^]DUP
+# ^]ECH R
+# ^]EOL
+# ^]RSS T
+# ^]SNO N
+# ^]STO 9 17 25 33 41 49 57 65 73
+# Other modes may be set according to communication requirements.
+# If the command character is inadvertently changed, termcap can't restore it.
+# Insert-character cannot be made to work on both top and bottom rows.
+# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
+# There also seems to be a problem with vertical motion, perhaps involving
+# delete/insert-line, following a typed carriage return. This terminal sucks.
+# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
+# work any more. -- esr)
+tek4025a|Tektronix 4025A,
+ OTbs, OTpt, am, bw, da, db, xon,
+ cols#80, it#8, lines#34,
+ bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
+ cr=\r, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
+ cud1=\n, cuf=\035rig %p1%d;, cuf1=\035rig;,
+ cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
+ dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
+ el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
+ il1=\013\035ili;, ind=\n, indn=\035dow %p1%d;,
+ rs2=!com\s29\035del\s0\035rss\st\035buf\035buf\sn\035cle
+ \035dis\035dup\035ech\sr\035eol\035era\sg\035for\sn
+ \035pad\s203\035pad\s209\035sno\sn\035sto\s9\s17\s25
+ \s33\s41\s49\s57\s65\s73\035wor\s0;,
+ tbc=\035sto;,
+# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
+# Here's the command file that I use to get rogue to work on the 4025.
+# It should work with any program using the old curses (e.g. it better
+# not try to scroll, or cursor addressing won't work. Also, you can't
+# see the cursor.)
+# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
+tek4025-cr|tek 4025 for curses and rogue,
+ OTbs, am,
+ cols#80, it#8, lines#33,
+ clear=\037era;, cub1=^H, cud1=^F\n, cuf1=\037rig;,
+ cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F\n,
+ is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
+ rmcup=\037wor 0, smcup=\037wor 33h,
+# next two lines commented out since curses only allows 128 chars, sigh.
+# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
+# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
+tek4025ex|4025ex|4027ex|tek 4025 w/!,
+ is2=\037com\s33\r\n!sto\s9\,17\,25\,33\,41\,49\,57\,65\,73
+ \r,
+ rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
+tek4105|tektronix 4105,
+ OTbs, am, mir, msgr, ul, xenl, xt,
+ cols#79, it#8, lines#29,
+ acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
+ clear=\E[2J\E[H, cr=\r, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
+ cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
+ dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
+ il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
+ is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
+ kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
+ rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
+ rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
+ smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
+ smul=\E[=5;<2m, tbc=\E[1g,
+
+# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
+tek4105-30|4015 emulating 30 line vt100,
+ am, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#30, vt#3,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
+ clear=\E[H\E[J$<50>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
+ cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
+ rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
+ rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
+ rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;$<2>,
+ sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
+ smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
+ use=vt100+fnkeys,
+
+# Tektronix 4105 from BRL
+# The following setup modes are assumed for normal operation:
+# CODE ansi CRLF no DABUFFER 141
+# DAENABLE yes DALINES 30 DAMODE replace
+# DAVISIBILITY yes ECHO no EDITMARGINS 1 30
+# FLAGGING input INSERTREPLACE replace LFCR no
+# ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
+# SELECTCHARSET G1 0 TABS -2
+# Other setup modes may be set for operator convenience or communication
+# requirements; I recommend
+# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
+# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
+# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
+# GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
+# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
+# PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
+# XMTDELAY 0
+# and factory color maps. After setting these modes, save them with NVSAVE. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# "IC" cannot be used in combination with "im" & "ei".
+# "tek4105a" is just a guess:
+tek4105a|Tektronix 4105,
+ OTbs, OTpt, msgr, xon,
+ OTkn#8, cols#80, it#8, lines#30, vt#3,
+ acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
+ cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
+ kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
+ kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
+ ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
+ rmso=\E[m, rmul=\E[m,
+ rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
+ \ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l
+ \E[?7;8h\E[r\E[m\E>,
+ sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ use=ecma+index,
+
#
-# There is one serious bug with this terminal emulation's color
-# support: repositioning the cursor onto a cell with non-matching
-# colors obliterates that cell's contents, replacing it with a blank
-# and displaying a colored cursor in the "current" colors. There is
-# no complete workaround at present [other than using the monochrome
-# (-m) entries,] but removing the (msgr) capability seemed to help.
+# Tektronix 4106/4107/4109 from BRL
+# The following setup modes are assumed for normal operation:
+# CODE ansi COLUMNMODE 80 CRLF no
+# DABUFFER 141 DAENABLE yes DALINES 32
+# DAMODE replace DAVISIBILITY yes ECHO no
+# EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
+# LFCR no LOCKKEYBOARD no ORIGINMODE relative
+# PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
+# TABS -2
+# Other setup modes may be set for operator convenience or communication
+# requirements; I recommend
+# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
+# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
+# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
+# GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
+# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
+# PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
+# XMTDELAY 0
+# and factory color maps. After setting these modes, save them with NVSAVE. No
+# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
+# "IC" cannot be used in combination with "im" & "ei".
+tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
+ msgr, xon,
+ cols#80, it#8, lines#32, vt#3,
+ acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+ civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
+ cnorm=\E%!0\ETD10\E%!1, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
+ dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
+ il=\E[%p1%dL, il1=\E[L, ind=\n, is2=\E%!1, kbs=^H,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOA,
+ kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, kf6=\EOR,
+ kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F8,
+ ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmcup=\E%!0\ELBH=\E%!1, rmir=\E[4l, rmkx=\E[?1l\E>,
+ rmso=\E[m, rmul=\E[m,
+ rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40
+ \ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3
+ ;5l\E[?7;8h\E[r\E[m\E>,
+ sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
+ smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
+ use=ecma+index,
+
+# Refer to:
+# TEK Programmer's Reference
+# Part No. 070-4893-00
+# Product Group 18
+# 4107/4109 Computer Display Terminal
+# November 1983
#
-# The "standout" chosen was simple reverse-video, although a colorful
-# standout might be more aesthetically pleasing. Similarly, the bold
-# chosen is the terminal's own smeared bold, although a simple
-# color-change might be more readable. The color-bold (-b) entries
-# uses magenta colored text for bolding instead. The fancy color (-f
-# and -f2) entries use color for bold, standout and underlined text
-# (underlined text is still underlined, though.)
+# Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
+# 0 selects Tek mode, i.e., \E%!0
+# 1 selects ANSI mode
+# 2 selects ANSI edit-mode
+# 3 selects VT52 mode
#
-# Apparently the terminal emulator does support a VT-100-style
-# alternate character set, but all the alternate character set
-# positions have been left blank in the font. For this reason, no
-# alternate character set capabilities have been included in this
-# description. The console driver appears to be ASCII-only, so (enacs)
-# has been excluded [although the VT-100 sequence does work.]
+# One odd thing about the description (which has been unchanged since the 90s)
+# is that the cursor addressing is using VT52 mode, and a few others use the
+# VT52's non-CSI versions of ANSI, e.g., \EJ. A possible explanation is that
+# the developer used Emacs, which misuses cvvis (this description sets VT52
+# mode in that capability).
+tek4107|tek4109|tektronix terminals 4107 4109,
+ OTbs, am, mir, msgr, ul, xenl, xt,
+ cols#79, it#8, lines#29,
+ bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
+ bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=\r,
+ cub1=^H, cud1=\n, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
+ dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=\n,
+ kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
+ rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
+ sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;
+ %?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
+ sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
+ smul=\E%!1\E[4m$<2>\E%!0,
+# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
+# see the note attached to tek4207.
+tek4207-s|Tektronix 4207 with sysline but no memory,
+ eslok, hs,
+ dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
+ is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
+ C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
+ is2=\E7\E[?6l\E[2K\E[?6h\E8,
+ tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
+
+# The 4110 series may be a wonderful graphics series, but they make the 4025
+# look good for screen editing. In the dialog area, you can't move the cursor
+# off the bottom line. Out of the dialog area, ^K moves it up, but there
+# is no way to scroll.
#
-# The default Mac OS X and Darwin installation reports "vt100" as the
-# terminal type, and exports no helpful environment variables. To fix
-# this, change the "console" entry in /etc/ttys from "vt100" to
-# "xnuppc-WxH", where W and H are the character dimensions of your
-# console (see below.)
+# Note that there is a floppy for free from Tek that makes the
+# 4112 emulate the vt52 (use the vt52 termcap). There is also
+# an expected enhancement that will use ANSI standard sequences.
#
-# The font used by the terminal emulator is apparently one originally
-# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
-# file includes descriptions for the following geometries:
+# 4112 in non-dialog area pretending to scroll. It really wraps
+# but vi is said to work (more or less) in this mode.
#
-# Pixels Characters Entry Name (append -m for monochrome)
-# -------------------------------------------------------------------
-# 640x400 80x25 xnuppc-80x25
-# 640x480 80x30 xnuppc-80x30
-# 720x480 90x30 xnuppc-90x30
-# 800x600 100x37 xnuppc-100x37
-# 896x600 112x37 xnuppc-112x37
-# 1024x640 128x40 xnuppc-128x40
-# 1024x768 128x48 xnuppc-128x48
-# 1152x768 144x48 xnuppc-144x48
-# 1280x1024 160x64 xnuppc-160x64
-# 1600x1024 200x64 xnuppc-200x64
-# 1600x1200 200x75 xnuppc-200x75
-# 2048x1536 256x96 xnuppc-256x96
+# 'vi' works reasonably well with this entry.
#
-# The basic "xnuppc" entry includes no size information, and the
-# emulator includes no reporting capability, so you'll be at the mercy
-# of the TTY device (which reports incorrectly on my hardware.) The
-# color-bold entries do not include size information.
-
-# The '+' entries are building blocks
-xnuppc+basic|Darwin PowerPC Console basic capabilities,
- am, bce, mir, xenl,
- it#8,
- bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
- el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
- rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
- rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
- sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
- sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
-
-xnuppc+c|Darwin PowerPC Console ANSI color support,
- colors#8, ncv#32, pairs#64,
- op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-
-xnuppc+b|Darwin PowerPC Console color-bold support,
- ncv#32,
- bold=\E[35m,
- sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
- use=xnuppc+basic,
-
-xnuppc+f|Darwin PowerPC Console fancy color support,
- ncv#35,
- sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
- smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
-
-xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
- ncv#35,
- bold=\E[33m,
- sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
- smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
-
-# Building blocks for specific screen sizes
-xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
- cols#80, lines#25,
-
-xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
- cols#80, lines#30,
-
-xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
- cols#90, lines#30,
-
-xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
- cols#100, lines#37,
-
-xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
- cols#112, lines#37,
-
-xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
- cols#128, lines#40,
-
-xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
- cols#128, lines#48,
-
-xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
- cols#144, lines#48,
-
-xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
- cols#160, lines#64,
-
-xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
- cols#200, lines#64,
-
-xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
- cols#200, lines#75,
-
-xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
- cols#256, lines#96,
-
-# These are different combinations of the building blocks
-
-xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
- use=xnuppc+basic,
-
-xnuppc|darwin|Darwin PowerPC Console (color),
- use=xnuppc+c, use=xnuppc+basic,
-
-xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
- use=xnuppc+b,
-
-xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
- use=xnuppc+b, use=xnuppc+c,
-
-xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
- use=xnuppc+f,
-
-xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
- use=xnuppc+f, use=xnuppc+c,
-
-xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
- use=xnuppc+f2,
-
-xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
- use=xnuppc+f2, use=xnuppc+c,
-
-# Combinations for specific screen sizes
-xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
- use=xnuppc+80x25, use=xnuppc+basic,
-
-xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
- use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
-
-xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
- use=xnuppc+80x30, use=xnuppc+basic,
-
-xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
- use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
+otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
+ am,
+ cols#80, lines#34,
+ bel=^G, clear=\E^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ind=\n,
+ rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
+# The 4112 with the ANSI compatibility enhancement
+tek4112|tek4114|tektronix 4110 series,
+ OTbs, am, db,
+ cols#80, lines#34,
+ cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
+ dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
+ ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
+ rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
+tek4112-nd|4112 not in dialog area,
+ OTns,
+ cuu1=^K, use=tek4112,
+tek4112-5|4112 in 5 line dialog area,
+ lines#5, use=tek4112,
+# (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
+# removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
+# Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
+# previously \0410 and \0411 sequences...I don't *think* they were supposed
+# to be 4-digit octal -- esr)
+tek4113|tektronix 4113 color graphics with 5 line dialog area,
+ OTbs, am, da, eo,
+ cols#80, lines#5,
+ clear=\ELZ, cub1=^H, cud1=\n, cuf1=\ELM1 \ELM0,
+ flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
+ \ERBA4\ERBA4\ERB0,
+ is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
+tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
+ lines#34,
+ is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
+# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
+# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
+# :vb: needs enough delay to let you see the background color being toggled.
+tek4113-nd|tektronix 4113 color graphics with no dialog area,
+ OTbs, am, eo,
+ cols#80, it#8, lines#34,
+ clear=\E^L, cub1=^H, cud1=\n, cuf1=^I, cuu1=^K,
+ cvvis=\ELZ\EKA0,
+ flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4
+ \ERBA4\ERBA4\ERB0,
+ home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
+ ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
+# This entry is from Tek. Inc. (Brian Biehl)
+# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
+otek4115|Tektronix 4115,
+ OTbs, am, da, db, eo,
+ cols#80, it#8, lines#34,
+ cbt=\E[Z, clear=\E[H\E[2J,
+ cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
+ el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
+ il1=\E[L,
+ is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?
+ \E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
+ kbs=^H, ri=\EM, rmam=\E[?7l,
+ rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
+ rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
+ smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
+ smul=\E[4m,
+tek4115|newer tektronix 4115 entry with more ANSI capabilities,
+ am, xon,
+ cols#80, lines#34,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
+ cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
+ dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
+ ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=\n, invis=\E[8m, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rev=\E[7m,
+ rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
+ sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;
+ %;%?%p7%t8;%;m,
+ sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%p1%{1}%+%dd, use=ansi+rep,
+# The tek4125 emulates a vt100 incorrectly - the scrolling region
+# command is ignored. The following entry replaces <csr> with the needed
+# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
+# chokes on; and adds a lot of initialization for the tek dialog area.
+# Note that this entry uses all 34 lines and sets the cursor color to green.
+# Steve Jacobson 8/85
+# (tek4125: there were two "\!"s in the is that I replaced with "\E!";
+# commented out, <smir>=\E1 because there's no <rmir> -- esr)
+tek4125|tektronix 4125,
+ lines#34,
+ csr@, dl1=\E[1M, il1=\E[1L,
+ is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
+ \ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
+ \E[?8h,
+ rc@, sc@, smkx=\E=, use=vt100+4bsd,
-xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
- use=xnuppc+90x30, use=xnuppc+basic,
+# From: <jcoker@ucbic>
+# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
+# supplied another, less capable 4107 entry. So we'll use that for 4107 and
+# note that if jcoker wasn't confused you may be able to use this one.
+# I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
+tek4207|Tektronix 4207 graphics terminal with memory,
+ am, bw, mir, msgr, ul, xenl,
+ cols#80, it#8, lines#32,
+ blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
+ cub1=^H, cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
+ el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
+ il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
+ is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8
+ C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
+ kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
+ rev=\E[7m, ri=\E[T,
+ rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
+ rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
+ smul=\E[4m, tbc=\E[1g,
-xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
- use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
+# From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
+# (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
+# Tab had been given as \E2I,that must be the tab-set capability -- esr)
+tek4404|tektronix 4404,
+ OTbs,
+ cols#80, it#8, lines#32,
+ blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
+ rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
+ rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
+ smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
+ smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
+# Some unknown person wrote:
+# I added the is string - straight Unix has ESC ; in the login
+# string which sets a ct8500 into monitor mode (aka 4025 snoopy
+# mode). The is string here cleans up a few things (but not
+# everything).
+ct8500|tektronix ct8500,
+ am, bw, da, db,
+ cols#80, lines#25,
+ bel=^G, cbt=\E^I, clear=\E^E, cr=\r, cub1=^H, cud1=\n,
+ cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
+ dch1=\E^], dl1=\E\r, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
+ il1=\E^L, ind=\n, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
+ rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
-xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
- use=xnuppc+100x37, use=xnuppc+basic,
+# Tektronix 4205 terminal.
+#
+# am is not defined because the wrap around occurs not when the char.
+# is placed in the 80'th column, but when we are attempting to type
+# the 81'st character on the line. (esr: hmm, this is like the vt100
+# version of xenl, perhaps am + xenl would work!)
+#
+# Bold, dim, and standout are simulated by colors and thus not allowed
+# with colors. The tektronix color table is mapped into the RGB color
+# table by setf/setb. All colors are reset to factory specifications by oc.
+# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
+# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
+# interval then maps into pre-defined value.
+tek4205|tektronix 4205,
+ ccc, mir, msgr,
+ colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
+ clear=\E[2J\E[H, cr=\r, cub=\E[%p1%dD, cub1=\E[D,
+ cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
+ ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
+ home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
+ ind=\ED,
+ initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3
+ %e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=
+ %t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<
+ %tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE
+ 1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<
+ %tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD
+ 4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}
+ %<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%t
+ C8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:
+ %eF4%;\E%%!1,
+ invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
+ kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
+ kf7=\ES,
+ oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40
+ \E%!1,
+ op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
+ rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
+ setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
+ %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
+ %e1m%;,
+ setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1
+ %{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m
+ %e1m%;,
+ sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
+ smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
+ smul=\E[4m, tbc=\E[1g,
-xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
- use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
+#### Teletype (tty)
+#
+# These are the hardcopy Teletypes from before AT&T bought the company,
+# clattering electromechanical dinosaurs in Bakelite cases that printed on
+# pulpy yellow roll paper. If you remember these you go back a ways.
+# Teletype-branded VDTs are listed in the AT&T section.
+#
+# The earliest UNIXes were designed to use these clunkers; nroff and a few
+# other programs still default to emitting codes for the Model 37.
+#
-xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
- use=xnuppc+112x37, use=xnuppc+basic,
+tty33|tty35|model 33 or 35 teletype,
+ hc, os, xon,
+ cols#72,
+ bel=^G, cr=\r, cud1=\n, ind=\n,
+tty37|model 37 teletype,
+ OTbs, hc, os, xon,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
+ ind=\n,
-xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
- use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
+# There are known to be at least three flavors of the tty40, all seem more
+# like IBM half duplex forms fillers than ASCII terminals. They have lots of
+# awful braindamage, such as printing a visible newline indicator after each
+# newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
+# braindamaged but has hope and is described here. The 40-4 is a 3270
+# lookalike and beyond hope. The terminal has visible bell but I don't know
+# it - it's null here to prevent it from showing the BL character.
+# There is an \EG in <nl> because of a bug in old vi (if stty says you have
+# a "newline" style terminal (-crmode) vi figures all it needs is nl
+# to get crlf, even if <cr> is not ^M.)
+# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
+tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
+ OTbs, xon,
+ cols#80, lines#24,
+ clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
+ cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
+ ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
+ ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
+ kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
+ rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
+tty43|model 43 teletype,
+ OTbs, am, hc, os, xon,
+ cols#132,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
-xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
- use=xnuppc+128x40, use=xnuppc+basic,
+#### Tymshare
+#
-xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
- use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
+# You can add <is2=\E<> to put this 40-column mode, though I can't
+# for the life of me think why anyone would want to.
+scanset|sc410|sc415|Tymshare Scan Set,
+ am, bw, msgr,
+ cols#80, lines#24,
+ acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=\r, cub1=^H,
+ cud1=\n, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=\n, kcub1=\ED,
+ kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
+ mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
-xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
- use=xnuppc+128x48, use=xnuppc+basic,
+#### Volker-Craig (vc)
+#
+# If you saw a Byte Magazine cover with a terminal on it during the early
+# 1980s, it was probably one of these. Carl Helmers liked them because
+# they could crank 19.2 and were cheap (that is, he liked them until he tried
+# to program one...)
+#
-xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
- use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
+# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
+# every other linefeed.
+vc303|vc103|vc203|volker-craig 303,
+ OTbs, OTns, am,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
+ cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=\n, kcuf1=^I,
+ kcuu1=^N, ll=\017$<1>W,
+vc303a|vc403a|volker-craig 303a,
+ clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
+ home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
+# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
+vc404|volker-craig 404,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\030$<40>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
+ cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
+ ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=\n,
+ kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^Z,
+vc404-s|volker-craig 404 w/standout mode,
+ cud1=\n, rmso=^O, smso=^N, use=vc404,
+# From: <wolfgang@cs.sfu.ca>
+# (vc414: merged in cup/dl1/home from an old vc414h-noxon)
+vc414|vc414h|Volker-Craig 414H in sane escape mode.,
+ OTbs, am,
+ cols#80, lines#24,
+ clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
+ cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
+ dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
+ ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
+ kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
+ kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
+ lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
+ rmso=\E^_, smso=\E^Y,
+vc415|volker-craig 415,
+ clear=^L, use=vc404,
-xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
- use=xnuppc+144x48, use=xnuppc+basic,
+######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
+#
-xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
- use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
+#### IBM PC and clones
+#
-xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
- use=xnuppc+160x64, use=xnuppc+basic,
+# The pcplot IBM-PC terminal emulation program is really messed up. It is
+# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
+# doesn't support scrolling regions, ignores add line commands, and ignores
+# delete line commands. Consequently, the resulting behavior looks like a
+# crude adm3a-type terminal.
+# Steve Jacobson 8/85
+pcplot|pc-plot terminal emulation program,
+ xenl@,
+ csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
+# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
+# I've found that my KayPro II, running MDM730, continues to emulate an
+# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
+# system the following termcap entry works well:
+# I have noticed a couple of minor glitches, but nothing I can't work
+# around. (I added two capabilities from the BRL entry -- esr)
+kaypro|kaypro2|kaypro II,
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=\032$<1/>, cr=\r, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
+ el=^X, home=^^, il1=\EE, ind=\n, kcud1=\n, kcuf1=^L, kcuu1=^K,
-xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
- use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
+# From IBM, Thu May 5 19:35:27 1983
+# (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
+ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
+ OTbs, am,
+ cols#80, lines#24,
+ bel=^G, clear=^L^K, cr=\r^^, cub1=^], cud1=\n, cuf1=^\,
+ cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
-xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
- use=xnuppc+200x64, use=xnuppc+basic,
+ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
+ OTbs, am, bw, eo, hs, km, msgr, ul,
+ cols#80, it#8, lines#24,
+ acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x
+ \263,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=\r,
+ cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
+ indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
+ kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=^?, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, kf3=\242,
+ kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, kf9=\250,
+ khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, ll=\E[24;1H,
+ nel=\r, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
+ rmso=\E[m, rmul=\E[m,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
+ %;%?%p7%t30;40%;m,
+ sgr0=\E[m, smso=\E[7m, smul=\E[4m,
-xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
- use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
+#### Apple II
+#
+# Apple II firmware console first, then various 80-column cards and
+# terminal emulators. For two cents I'd toss all these in the UFO file
+# along with the 40-column apple entries.
+#
-xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
- use=xnuppc+200x75, use=xnuppc+basic,
+# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
+# 'it#8' tells UNIX that you have tabs every 8 columns. This is a
+# function of TIC, not the firmware.
+# The clear key on a IIgs will do something like clear-screen,
+# depending on what you're in.
+appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
+ OTbs, am, bw, eo, msgr,
+ cols#80, it#8, lines#24,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=\n,
+ kcuf1=^U, kcuu1=^K, kdch1=^?, nel=\r^W, ri=^V, rmso=^N,
+ smso=^O,
+# Apple //e with 80-column card, entry from BRL
+# The modem interface is permitted to discard LF (maybe DC1), otherwise
+# passing characters to the 80-column firmware via COUT (PR#3 assumed).
+# Auto-wrap does not work right due to newline scrolling delay, which also
+# requires that you set "stty cr2".
+# Note: Cursor addressing is only available via the Pascal V1.1 entry,
+# not via the BASIC PR#3 hook. All this nonsense can be avoided only by
+# using a terminal emulation program instead of the built-in firmware.
+apple2e|Apple //e,
+ bw, msgr,
+ cols#80, lines#24,
+ bel=^G, clear=\014$<100/>, cub1=^H, cud1=\n, cuu1=^_,
+ ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
+ is2=^R^N, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^U, kcuu1=^K,
+ nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
+ smso=^O,
+# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
+# 4.20, with incoming and outgoing terminals both on 0, emulation On.
+apple2e-p|Apple //e via Pascal,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
+ kcud1=\n, use=apple2e,
+# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
+# Enable DC3/DC1 flow control with "stty ixon -ixany".
+apple-ae|ASCII Express,
+ OTbs, am, bw, msgr, nxon, xon,
+ cols#80, it#8, lines#24,
+ bel=\007$<500/>, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=\n,
+ kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
+ smso=^O,
+appleII|apple ii plus,
+ OTbs, am,
+ cols#80, it#8, lines#24,
+ clear=^L, cnorm=^TC2, cub1=^H, cud1=\n, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
+ ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
+ is2=^TT1^N, kcud1=\n, kcuf1=^U, rmso=^N, sgr0=^N, smso=^O,
+# Originally by Gary Ford 21NOV83
+# From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
+apple-80|apple II with smarterm 80 col,
+ OTbs, am, bw,
+ cols#80, lines#24,
+ cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=\n,
+ cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
+ ed=\013$<10*/>, el=\035$<10/>, home=^Y,
+apple-soroc|apple emulating soroc 120,
+ am,
+ cols#80, lines#24,
+ bel=^G, clear=\E*$<300>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
+ home=^^, ind=\n, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
+# From Peter Harrison, Computer Graphics Lab, San Francisco
+# ucbvax!ucsfmis!harrison .....uucp
+# ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
+# "These two work. If you don't have the inverse video chip for the
+# Apple with videx then remove the :so: and :se: fields."
+# (apple-videx: this used to be called DaleApple -- esr)
+apple-videx|Apple with videx videoterm 80 column board with inverse video,
+ OTbs, am, xenl,
+ cols#80, it#8, lines#24,
+ clear=\014$<300/>, cub1=^H, cud1=\n, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, ht=^I, kcub1=^H, kcud1=\n, kcuf1=^U, khome=^Y,
+ rmso=^Z2, sgr0=^Z2, smso=^Z3,
+# My system [for reference] : Apple ][+, 64K, Ultraterm display card,
+# Apple Cat ][ 212 modem, + more all
+# controlled by ASCII Express: Pro.
+# From Dave Shaver <isucs1!shaver>
+apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
+ OTbs, am, eo, xt,
+ cols#80, lines#24,
+ acsc=, clear=^L, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ flash=^W35^W06, home=^Y,
+ is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
+ rmso=^N, smso=^O,
+apple-uterm|Ultraterm for Apple micros,
+ OTbs, am, eo, xt,
+ cols#80, lines#24,
+ acsc=, clear=^L, cuf1=^\,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
+# from trwrba!bwong (Bradley W. Wong):
+#
+# This entry assumes that you are using an apple with the UCSD Pascal
+# language card. SYSTEM.MISCINFO is assumed to be the same as that
+# supplied with the standard apple except that screenwidth should be set
+# using SETUP to 80 columns. Note that the right arrow is not mapped in
+# this termcap entry. This is because that key, on the Apple, transmits
+# a ^U and would thus preempt the more useful "up" function of vi.
+#
+# HMH 2/23/81
+apple80p|80-column apple with Pascal card,
+ am, bw,
+ cols#80, lines#24,
+ clear=^Y^L, cuf1=^\\:,
+ cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
+ home=^Y, kcub1=^H,
+#
+# Apple II+ equipped with Videx 80 column card
+#
+# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
+# manually converted by D A Gwyn
+#
+# DO NOT use any terminal emulation with this data base, it works directly
+# with the Videx card. This has been tested with vi 1200 baud and works fine.
+#
+# This works great for vi, except I've noticed in pre-R2, ^U will scroll back
+# 1 screen, while in R2 ^U doesn't.
+# For inverse alternate character set add:
+# <smacs>=^O:<rmacs>=^N:
+# (apple-v: added it#8 -- esr)
+apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
+ am, xenl,
+ cols#80, it#8, lines#24,
+ bel=\007$<100/>, clear=\014$<16*/>, cr=\r, cub1=^H,
+ cud1=\n, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
+ cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
+ ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^\, kcuu1=^_,
+ khome=^Y, rmso=^Z2, smso=^Z3,
+apple-videx3|vapple|Apple II with 80 col card,
+ OTbs, am,
+ cols#80, lines#24,
+ clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
+ home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
+ kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
+#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
+aepro|Apple II+ running ASCII Express Pro--vt52,
+ OTbs,
+ cols#80, lines#24,
+ clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
+ cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
+ el=\EK, home=\EH,
+# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
+apple-vm80|ap-vm80|apple with viewmax-80,
+ OTbs,
+ cols#80, lines#24,
+ clear=\014$<300/>, cuf1=^\\:,
+ cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
+ ed=\013$<300/>, el=^], home=\031$<200/>,
-xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
- use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
+#### Apple Lisa & Macintosh
+#
-xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
- use=xnuppc+256x96, use=xnuppc+basic,
+# (lisa: changed <cvvis> to <cnorm> -- esr)
+lisa|apple lisa console display (black on white),
+ OTbs, am, eo, msgr,
+ cols#88, it#8, lines#32,
+ acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
+ cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
+ is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
+ sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
+liswb|apple lisa console display (white on black),
+ is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
+ smso=\E[m, smul=\E[4m, use=lisa,
-xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
- use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
+# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
+# <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
+#
+# These entries assume that the 'Auto Wraparound' is enabled.
+# Xon-Xoff flow control should also be enabled.
+#
+# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
+# settings are in non-volatile memory and don't need to be reset upon login.
+# Also setting the number of columns glitches the screen annoyingly.
+# You can type "reset" to get them set.
+#
+lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
+ OTbs, OTpt, am, xenl, xon,
+ OTkn#4, cols#80, it#8, lines#24, vt#3,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
+ el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=\n, kbs=^H, kcub1=\EOD,
+ kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
+ kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
+ rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+ rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
+ sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g,
+# Lisaterm in 132 column ("wide") mode.
+lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
+ cols#132,
+ kbs=^H, kcub1=^H, kcud1=\n, use=lisaterm,
+# Although MacTerminal has insert/delete line, it is commented out here
+# since it is much faster and cleaner to use the "lock scrolling region"
+# method of inserting and deleting lines due to the MacTerminal implementation.
+# Also, the "Insert/delete ch" strings have an extra character appended to them
+# due to a bug in MacTerminal V1.1. Blink is disabled since it is not
+# supported by MacTerminal.
+mac|macintosh|Macintosh with MacTerminal,
+ xenl,
+ OTdN#30,
+ blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
+# Lisaterm in 132 column ("wide") mode.
+mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
+ cols#132, use=mac,
#### Radio Shack/Tandy
#
coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
OTbs, am,
cols#80, it#8, lines#24,
- bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
- clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
+ bel=^G, blink=^_", bold=\E\:\001, civis=^E\s,
+ clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=\n, cuf1=^F,
cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
- dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
+ dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=\n,
kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
# (trs2: removed obsolete ":nl=^_:" -- esr)
trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
OTbs, am, msgr,
cols#80, it#8, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=^_, cuf1=^],
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
- el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
+ el=^A, home=^F, ht=^I, il1=^D, ind=\n, kbs=^H, kcub1=^\,
kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
# From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
# (This had extension capabilities
OTbs, am,
cols#80, it#8, lines#24,
acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
- cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cnorm=\ERC, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
- ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+ ind=\n, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
- indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
- kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
- kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
- ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
- rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
+ invis=\E[8m, is2=\E[20l, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
+ kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
+ kf8=\E[7~, kf9=\E[8~, rev=\E[7m, ri=\E[T, rmacs=^O,
+ rmso=\E[m, rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N,
+ smso=\E[7m, smul=\E[4m, use=ecma+index,
# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
# (amiga: added empty <acsc> to suppress a warning.
OTbs, bw, msgr,
cols#80, lines#24,
acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
- civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
+ civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=\r,
cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
- kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
+ kdch1=^?, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
# requires use of appropriate preferences settings.
amiga-vnc|Amiga using VNC console (black on light gray),
am, da, db, msgr, ndscr,
- btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
+ btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#0x100,
bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
- clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
+ clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
- indn=\E[%p1%dS, invis=\E8m,
+ invis=\E8m,
is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
+ kcuu1=\E[A, kdch1=^?, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
- rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
- rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
+ rev=\E[7m, ri=\EM, rmcup=\E[?7h\E[r\E[J, rmkx=\E[?1l,
+ rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
- smso=\E[1m, smul=\E[4m,
+ smso=\E[1m, smul=\E[4m, use=ecma+index,
# MorphOS on Genesi Pegasos
# By Pavel Fedin <sonic_amiga@rambler.ru>
-morphos,
+morphos|MorphOS on Genesi Pegasos,
acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~,
khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~,
ri=\215, rin@, use=amiga-h,
# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
-# I'm trying to write a termcap for a commodore b-128, and I'm
+# I'm trying to write a termcap for a commodore b-128, and I'm
# having a little trouble. I've had to map most of my control characters
# to something that unix will accept (my delete-char is a ctrl-t, etc),
# and create some functions (like cm), but thats life.
-# The problem is with the arrow keys - right, and up work fine, but
+# The problem is with the arrow keys - right, and up work fine, but
# left deletes the previous character and down I just can't figure out.
# Jove knows what I want, but I don't know what it's sending to me (it
# isn't thats bound to next-line in jove).
-# Anybody got any ideas? Here's my termcap.
+# Anybody got any ideas? Here's my termcap.
# DAG -- I changed his "^n" entries to "\n"; see if that works.
#
commodore|b-128|Commodore B-128 micro,
am, bw,
OTdN#20, cols#80, lines#24, pb#150,
- OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
+ OTbc=^H, OTnl=\r, clear=\E\006$<10/>, cr=\r, cud1=\n,
cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
- kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
+ kcub1=^B, kcud1=\n, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
smir=,
#### North Star
osborne-w|osborne1-w|osborne I in 104-column mode,
msgr, ul, xt,
cols#104, lines#24,
- bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
+ dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=\n, kcub1=^H, kcud1=\n,
kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
# Osborne I from ptsfa!rhc (Robert Cohen) via BRL
osborne|osborne1|osborne I in 80-column mode,
OTbs, am, mir, msgr, ul, xhp,
OTdB#4, cols#80, lines#24,
- clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
+ clear=^Z, cub1=\010$<4>, cud1=\n, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
- kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
#
# Osborne Executive definition from BRL
osexec|Osborne executive,
OTbs, am,
OTug#1, cols#80, lines#24, xmc#1,
- OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ OTnl=\n, bel=^G, clear=^Z, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
- is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
+ is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L,
kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
#
# See
-# http://www.minix3.org/manpages/man4/console.4.html
+# https://web.archive.org/web/20120703021949/http://www.minix3.org/manpages/html4/console.html
minix|minix console (v3),
- acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
- kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j
+ \331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v
+ \301w\302x\263y\363z\362{\343|\330}\234~\376,
+ kdch1=^?, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
use=ecma+color, use=minix-1.7,
# See
-# http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
+# https://web.archive.org/web/20030914201935/http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
# This is the entry provided with minix 1.7.4, with bogus :ri: removed.
minix-1.7|minix console (v1.7),
am, xenl,
cols#80, it#8, lines#25,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
- il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ il1=\E[L, ind=\n, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
- lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
+ lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=\r\n,
rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
smso=\E[7m, smul=\E[4m,
# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
minix-old|minix-1.5|minix console (v1.5),
xon,
cols#80, it#8, lines#25,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=\r,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
- ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
- khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
+ khome=\E[H, nel=\r\n, rev=\E[7m, ri=\EM, rmso=\E[0m,
rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
# The linewrap option can be specified by editing /usr/include/minix/config.h
# before recompiling the minix 1.5 kernel.
pc-coherent|pcz19|coherent|IBM PC console running Coherent,
am, mir,
cols#80, it#8, lines#25,
- bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ bel=^G, clear=\EE, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
- ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
+ ed=\EJ, el=\EK, home=\EH, ht=^I, ind=\n, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
# not described here because this derives from an old termcap entry.
pc-venix|venix|IBM PC console running Venix,
cols#80, it#8, lines#25,
- bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
- ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
+ ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=\n, kbs=^H, kcub1=\EK,
kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
#### Miscellaneous microcomputer consoles
am, da, db, mir, msgr,
cols#82, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
- cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=^X,
cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
- kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
+ kf7=\EOV, kf8=\EOW, nel=\r\ED, rc=\E8, rev=\E[7m, ri=\E[T,
rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
smir=\E[4h, smso=\E[7m, smul=\E[4m,
# basis from Peter Harrison, Computer Graphics Lab, San Francisco
# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
basis|BASIS108 computer with terminal translation table active,
clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
- kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
+ kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
smso=\E(, use=adm3a,
# luna's BMC terminal emulator
luna|luna68k|LUNA68K Bitmap console,
xerox820|x820|Xerox 820,
am,
cols#80, lines#24,
- bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ bel=^G, clear=\032$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
- home=^^, ind=^J,
+ home=^^, ind=\n,
#### Videotex and teletext
#
cols#80, it#8, lines#24, wsl#72, xmc#0,
acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
- cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+ cnorm=\E[<1l, cr=\r, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
- home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=\n,
+ home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\n, ip=$<7/>,
is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
- is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
+ is3=\E[?3l, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
- mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ mc0=\E[i, nel=\r\n, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
u6=\E[%i%d;%dR, u7=\E[6n,
-# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
+# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998, updated 19 Sep 2016
#
minitel1|minitel 1,
- am, bw, eslok, hs, hz, msgr,
- colors#8, cols#40, lines#24, pairs#8,
- acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
- cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
- cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
- enacs=^Y, fsl=^J, home=^^, ind=^J,
- is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
- rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
- setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
+ am, bw, eslok, hs, hz, .msgr, G0,
+ colors#8, cols#40, lines#24, pairs#8, .ncv#16,
+ acsc=j+k+l+m+n+o~q`s_t+u+v+w+x|, bel=^G, blink=\EH,
+ civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
+ cup=\037%p1%'A'%+%c%p2%'A'%+%c, cuu1=^K,
+ dsl=\037@A\030\n, el=^X,
+ flash=\037@A\EW \177\022\177\022P\r\030\n, fsl=\n,
+ home=^^, ind=\n, is2=\E;`ZQ\E\:iC\E\:iE\021, kbs=^SG,
+ kcan=^SE, kend=^SI, kent=^SA, khlp=^SD, knp=^SH, kpp=^SB,
+ krfr=^SC, nel=\r\n, op=\EG, rep=%p1%c\022%p2%'?'%+%c,
+ rev=\E], ri=^K, rmso=\E\\,
+ rs2=\024\037XA\030\n\030\n\030\n\030\n\030\n\030\n\030\n
+ \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\n
+ \030\n\030\n\030\n\030\n\030\n\030\n\030\n\030\014
+ \021,
+ setab=\0, setaf=\E%p1%'@'%+%c, setb=\0,
+ setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=
+ %tC%e%p1%'@'%+%c%;,
sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
- sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
-# is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
+ sgr0=\EI\E\\\EG, smso=\E], tsl=\037@%p1%'A'%+%c,
+ u6=\037%c%'A'%-%c%'A'%-, u7=\Ea,
+ u8=\001%[BCDEFGHIJKLbcresdfg0123456789]\004, u9=\E9{,
+ .dim=\EB, .hup=\E9g, .rs2=^L, .u8=^ABr4^D,
+ C0=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$, E0=^O,
+ S0=^N,
+ XC=B\031%\,\241!\,\242"\,\243#\,\244$\,\245%\,\246&\,\247'\,
+ \250(\,\253+\,\257P\,\2600\,\2611\,\2622\,\2633\,\2655\,
+ \2677\,\272k\,\273;\,\274<\,\275=\,\276>\,\277?\,\300AA\,
+ \301BA\,\302CA\,\303DA\,\304HA\,\305JA\,\306a\,\307KC\,
+ \310AE\,\311BE\,\312CE\,\313HE\,\314AI\,\315BI\,\316CI\,
+ \317HI\,\320b\,\321DN\,\322AO\,\323BO\,\324CO\,\325DO\,
+ \326HO\,\3274\,\330i\,\331AU\,\332BU\,\333CU\,\334HU\,
+ \335BY\,\336l\,\337{\,\340Aa\,\341Ba\,\342Ca\,\343Da\,
+ \344Ha\,\345Ja\,\346q\,\347Kc\,\350Ae\,\351Be\,\352Ce\,
+ \353He\,\354Ai\,\355Bi\,\356Ci\,\357Hi\,\360r\,\361Dn\,
+ \362Ao\,\363Bo\,\364Co\,\365Do\,\366Ho\,\3678\,\370y\,
+ \371Au\,\372Bu\,\373Cu\,\374Hu\,\375By\,\376|\,\377Hy\,
+ \252c\,\,0\017\031%\016\,}#\,f0\,g1\,\\\,\\\,\,+.\,./\,0
+ \177\,--,
minitel1b|minitel 1-bistandard (in 40cols mode),
mir,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
- is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
- kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
- smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
-# <rmkx> posait des problemes (logout en sortant de vi).
+ is1=\E;iYA\E;jYC, kbs@, kcan@, kclr=\E[2J, kctab=^I,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
+ kdl1=\E[M, kent@, kf1=^SD, kf10=^Y0, kf11=^Y1, kf12=^Y/,
+ kf13=^Y{1, kf14=^Y{2, kf15=^Y{3, kf16=^Y{4, kf17=^Y{5,
+ kf18=^Y{6, kf19=^Y{7, kf2=^SC, kf20=^Y{8, kf21=^Y{9,
+ kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kf3=^SF, kf4=^SA, kf5=^SG,
+ kf6=^SE, kf7=^Y8, kf8=^Y\,, kf9=^Y., khlp@, khome=\E[H,
+ kich1=\E[4h, kil1=\E[L, krfr@, lf1=Guide, lf2=Repetition,
+ lf3=Sommaire, lf4=Envoi, lf5=Correction, lf6=Annulation,
+ rmir=\E[4l, smir=\E[4h,
+ u8=\001%[ABCPtuvwxyz0123456789\:;<=>?]\004,
+ .ich=\E[%p1%d@, .ich1=\E[@, .kLFT=\E[P, .kRIT=\E[4h,
+ .kb2=^Y{g, .kcbt=^Y{i, .kel=^X, .mc0=\E\:|k, .rmkx=\E;jYA,
+ .rs1=\E[4l\E[2l, .smkx=\E;iYA\E;jYC, .u8=^ACu<^D,
+ use=minitel1,
+# rmkx posait des problemes (logout en sortant de vi).
minitel1b-80|minitel 1-bistandard (standard teleinformatique),
- am@, bw@, hz@,
+ am@, bw@, eslok@, hz@, msgr, G0,
colors@, cols#80, it#8, pairs@,
- blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
- clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
+ acsc@, blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
+ clear=\E[H\E[J, cnorm=\037@A\021\n, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
- ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
- kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
- kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
- ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
- sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
- sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
+ ht=^I, ind=\ED, is1@, is2@, kbs=\EOl, kcan=\EOQ, kend=\E)4\r,
+ kent=\EOM, kf1=\EOq, kf10=\EOp, kf11=\EOP1, kf12=\EOP2,
+ kf13=\EOP3, kf14=\EOP4, kf15=\EOP5, kf16=\EOP6, kf17=\EOP7,
+ kf18=\EOP8, kf19=\EOP9, kf2=\EOr, kf20=\EOP0, kf21=\EOP*,
+ kf22=\EOP#, kf23@, kf24@, kf3=\EOs, kf4=\EOt, kf5=\EOu,
+ kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khlp=\EOm, knp=\EOn,
+ kpp=\EOR, krfr=\EOS, lf1@, lf2@, lf3@, lf4@, lf5@, lf6@, nel=\EE,
+ op@, rc=\E8, rep@, rev=\E[7m, ri=\EM, rmkx@, rmso=\E[27m,
+ rmul=\E[24m,
+ rs2=\036\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[
+ H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M
+ \E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2
+ M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[2M\E[H\E[L\E[12H\E[
+ 2M\E[H\E[J\E[m,
+ sc=\E7, setab@, setaf@, setb@, setf@, sgr@, sgr0=\E[m, smkx@,
+ smso=\E[7m, smul=\E[4m,
+ tsl=\037@%?%p1%{63}%<%t%p1%'A'%+%c%e\177%p1%{62}%-%Pa%?%ga
+ %{1}%&%t\011%;%?%ga%{2}%&%t\011\011%;%?%ga%{4}%&%t\011
+ \011\011\011%;%?%ga%{07}%>%t\011\011\011\011\011\011
+ \011\011%;%?%ga%{15}%>%t\011\011\011\011\011\011\011
+ \011%;%;,
+ u6@, u7@, u8@, u9@, .acsc=}#f[, .enacs=^O, .kb2=\EOPg,
+ .kcbt=\EOPi, .ll=\E[24H, .mc0=\E[i, .rmacs=^O, .rs2=\Ec,
+ .sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1
+ ;%;m,
+ .smacs=^N, C0=}#f[j+k+l+m+n+o~q=s_t+u+v+w+x!0\032,
+ E0=^O, S0=^N,
+ XC=B\016%\017\,\243#\,\247]\,\260[\,\340@\,\347\\\\\,\351{\,
+ \350}\,\371|\,\300A\,\301A\,\302A\,\303A\,\304A\,\305A\,
+ \306E\,\307C\,\310E\,\311E\,\312E\,\313E\,\314I\,\315I\,
+ \316I\,\317I\,\320D\,\321N\,\322O\,\323O\,\324O\,\325O\,
+ \326O\,\331U\,\332U\,\333U\,\334U\,\335Y\,\337s\,\341a\,
+ \342a\,\343a\,\344a\,\345a\,\346e\,\352e\,\353e\,\354i\,
+ \355i\,\356i\,\357i\,\360d\,\361n\,\362o\,\363o\,\364o\,
+ \365o\,\366o\,\372u\,\373u\,\374u\,\375y\,\377y\,\267.\,
+ \327x\,\367/\,\261\E7\E[4m+\E8\E[C\,\,0\017%\016\,x|\,y
+ \E7\E[4m<\E8\E[C\,z\E7\E[4m>\E8\E[C\,g\E7\E[4m+\E8\E[C,
+ use=minitel1b,
+
+minitel1-nb|minitel 1 (40cols) noir & blanc sans couleurs avec bold et dim ...,
+ colors@, pairs@,
+ bold=\EG, clear=^L\EB,
+ cup=\037%p1%'A'%+%c%p2%'A'%+%c\EB, dim=\ED, home=^^\EB,
+ op@, rs2=^L\EB, setab@, setaf@, setb@, setf@,
+ sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
+ sgr0=\EI\E\\\EB, tsl=\037@%p1%'A'%+%c\EB, .invis=\E@,
+ use=minitel1,
+
+minitel1b-nb|minitel 1b (40cols) noir & blanc sans couleurs avec bold et dim ...,
+ msgr,
+ colors@, pairs@,
+ acsc=`>a9f!j%k4l<m-n=p#q\,rpt=u5v-w<x5yvzy|l~$,
+ bold=\EG, clear=^L\EB, cup=\E[%i%p1%d;%p2%dH, dim=\ED,
+ home=^^\EB, kend=\E)4\r, kf1=\E$4\r, kf2=\E#4\r,
+ kf3=\E&4\r, kf4=\E!4\r, kf5=\E'4\r, kf6=\E/4\r, knp=\E(4\r,
+ kpp=\E"4\r, op@, rmacs=^O, rs2=^L\EB, setab@, setaf@, setb@,
+ setf@,
+ sgr=%?%p1%p3%O%t\E]%;%?%p4%t\EH%;%?%p5%t\ED%;%?%p6%t\EG%;,
+ sgr0=\EI\E\\\EB, smacs=^N, tsl=\037@%p1%'A'%+%c\EB,
+ u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
+ .u8=\001Cu|\004r, use=minitel1b,
+
+# Note:
+#
+# Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
+#
+# TS+Connexion/Fin(Fin),Retour(Page Up),Suite(Page Down),Guide(F1),
+# Repetition(F2),Sommaire(F3),Envoi(F4),Correction(F5),Annulation(F6),
+# Ctrl+7(F7),Ctrl+8(F8),Ctrl+9(F9),Ctrl+0(F10),Ctrl+*(F11),Ctrl+#(F12).
+#
+# Ctrl+Suite-1(F13), Ctrl+Suite-2(F14), Ctrl+Suite-3(F15),
+# Ctrl+Suite-4(F16), Ctrl+Suite-5(F17), Ctrl+Suite-6(F18),
+# Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
+# Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
+#
+# Fonctionne par exemple avec Midnight Commander (mc).
+
+minitel2-80|minitel 2 (80cols) avec filets vt100 (DEC),
+ G0,
+ acsc=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}},
+ enacs=\E)0, rmacs=^O, smacs=^N, u6=\E[%i%d;%dR,
+ C0=ffggjjkkllmmnnooqqssttuuvvwwxxyyzz||}}, E0=^O,
+ S0=\E)0\016,
+ XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
+ \E(3g\,\265\E(3Y\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276
+ \E(3Q\,\277\E(3Z\,\300A\,\301A\,\302A\,\303A\,\304\E(3R\,
+ \305A\,\306E\,\307C\,\310E\,\311\E(3S\,\312E\,\313E\,
+ \314\E(3T\,\315I\,\316I\,\317I\,\320D\,\321\E(3W\,\322\E(
+ 3U\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U\,\332U\,
+ \333U\,\334\E(3V\,\335Y\,\337\E(3{\,\340\E(3A\,\341a\,
+ \342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(R\\\\\,
+ \350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i\,\355i
+ \,\356\E(3H\,\357\E(3I\,\360d\,\361\E(3X\,\362o\,\363o\,
+ \364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L\,\372u
+ \,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0\,\\\,m
+ \,+k\,.l\,0\177\,-j,
+ use=minitel12-80,
+
+minitel12-80|minitel 12 (80cols),
+ G0,
+ civis=\E[<1h, cnorm=\E[<1l, is2=\E[12h, u6=\E[%i%d;%dH,
+ u7=\E[6n,
+ .acsc=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0
+ \177,
+ .enacs=\E)3, .rmacs=^O, .rs3=\E[?4l, .scs=\E(%p1%c,
+ .smacs=^N,
+ C0=ffggj+k+l+m+n+ovq-swt+u+v+w+xx}}\,m+k.l-j0\177,
+ E0=^O, S0=\E)3\016,
+ XC=B%\E(B\,\243\E(3}\,\247\E(R[\,\257\E(3v\,\260\E(3f\,\261
+ \E(3g\,\267\E(3~\,\274\E(3O\,\275\E(3P\,\276\E(3Q\,\300A
+ \,\301A\,\302A\,\303A\,\304A\,\305A\,\306E\,\307C\,\310E
+ \,\311E\,\312E\,\313E\,\314I\,\315I\,\316I\,\317I\,\320D
+ \,\321N\,\322O\,\323O\,\324O\,\325O\,\326O\,\327x\,\331U
+ \,\332U\,\333U\,\334U\,\335Y\,\337\E(3{\,\340\E(3A\,
+ \341a\,\342\E(3B\,\343a\,\344\E(3C\,\345a\,\346e\,\347\E(
+ R\\\\\,\350\E(3E\,\351\E(3D\,\352\E(3F\,\353\E(3G\,\354i
+ \,\355i\,\356\E(3H\,\357\E(3I\,\360d\,\361n\,\362o\,
+ \363o\,\364\E(3J\,\365o\,\366\E(3K\,\367\E(3h\,\371\E(3L
+ \,\372u\,\373\E(3M\,\374\E(3N\,\375y\,\377y\,\,0\E)3%\E)0
+ \,\\\,m\,+k\,.l\,0\177\,-j,
+ use=minitel1b-80,
+
+#
+# Add these in your ~/.screenrc for inputting some special glyphs like french
+# accentuated chars in 40 cols mode:
+#
+# bindkey ^YA digraph '`' # Saisi accent grave.
+# bindkey ^YB digraph "'" # Saisi accent aigu.
+# bindkey ^YC digraph '^' # Saisi accent circonflexe.
+# bindkey ^YH digraph '"' # Saisi accent trema.
+#
+# bindkey ^Y# stuff \243 # Livre.
+# bindkey "^Y\047" stuff \247 # Paragraphe.
+# bindkey ^Yj stuff \306 # AE
+# bindkey ^Yz stuff \346 # ae
+# bindkey ^YKc stuff \347 # c cedille.
+#
+
+screen.minitel1|Screen specific for minitel1,
+ ncv@,
+ acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxy
+ yzz||}}~~,
+ bel=\007\E\^ \E\\, bold@, csr@, flash=\Eg\E\^ \E\\, kmous@,
+ rmul@, smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
+ use=xterm+x11mouse, use=screen4,
+
+screen.minitel1b|Screen specific for minitel1b,
+ kclr=\E[2J, kdl1=\E[M, kf13=^Y{1, kf14=^Y{2, kf15=^Y{3,
+ kf16=^Y{4, kf17=^Y{5, kf18=^Y{6, kf19=^Y{7, kf20=^Y{8,
+ kf21=^Y{9, kf22=^Y{0, kf23=^Y{*, kf24=^Y{#, kil1=\E[L,
+ use=screen.minitel1,
+
+screen.minitel1b-80|screen.minitel2-80|screen.minitel12-80|Screen specific for minitel1b-80 minitel2-80 and minitel12-80,
+ colors@, ncv@, pairs@,
+ bold=\E[1m, kent=\EOM, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@,
+ kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, khlp=\EOm, op@,
+ rmul=\E[24m, setab@, setaf@, setb@, setf@, smul=\E[4m,
+ use=screen.minitel1b,
+
+screen.minitel1-nb|Screen specific for minitel1-nb,
+ colors@, ncv@, pairs@,
+ bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
+ use=screen.minitel1,
+
+screen.minitel1b-nb|Screen specific for minitel1b-nb,
+ colors@, ncv@, pairs@,
+ bold=\E[1m, dim=\E[2m, op@, setab@, setaf@, setb@, setf@,
+ use=screen.minitel1b,
+
+# From: Alexandre Montaron, 29 Sep 2016
+
+linux-m1|Linux Minitel 1 "like" Couleurs,
+ am, bw@, ccc, mir, msgr, xenl,
+ colors#8, it#8, ncv#16, pairs#64,
+ acsc=a\261f\370g\361h\260j\274k\273l\311m\310n\316q\315t
+ \314u\271v\312w\313x\272y\363z\362{\343|\252~\372,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+ dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)U,
+ flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%d`,
+ ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\n,
+ initc=\E]P%p1%{15}%&%X%p2%{255}%&%02X%p3%{255}%&%02X%p4
+ %{255}%&%02X,
+ is2=\E]R\E]P3FFFF80\E[?8c, ka1=\EOw, ka3=\EOy, kb2=\E[G,
+ kbs=^?, kc1=\EOq, kc3=\EOs, kcbt=\E^I, kclr=\E\r, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
+ kdl1=\E\E[A, kend=\E[4~, kent=\EOM, kf1=\E[[A, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
+ kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+ khome=\E[1~, kich1=\E[2~, kil1=\E\E[B, kmous=\E[M,
+ knp=\E[6~, kpp=\E[5~, nel=\EE, oc=\E]R\E]P3FFFF80,
+ op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmpch=\E[10m, rmso=\E[27m,
+ rs1=\Ec, rs3=\E[37;40m\E[8], sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm, sgr0=\E[m, smacs=^N, smam=\E[?7h,
+ smir=\E[4h, smpch=\E[11m, smso=\E[7m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd, .VN=\E[?5l, .VR=\E[?5h, .am@,
+ .ich=\E[%p1%d@, .ich1=\E[@, .ll=\E[99H, .rmcup=,
+ .rmul=\E[24m, .smcup=\E]R\E]P3FFFF80\E[?8c,
+ .smul=\E[4m,
+ E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n,
+ use=vt220+cvis, use=linux+decid,
+
+# 1. Using double-shapes for vt100 graphical chars (eg: mc).
+# 2. Native brown color corrected to good yellow color.
+# 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
+# 4. Suppressed nonexistent underlined mode (normally as bright).
+# 5. ich/ich1 not filled because of non-curses programs.
+#--
+# 6. Suppressed nonexistent invisible mode.
+#(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
+
+linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
+ ccc@,
+ colors@, ncv@, pairs@,
+ acsc@, bold=\E[33m, enacs@, initc@,
+ is2=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5A9A
+ 9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]PCFFFF
+ FF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
+ oc@, op@, rmacs@, setab=^A, setaf=^A, smacs@, .setab@, .setaf@,
+ .smcup=\E]R\E]P1A9A9A9\E]P2A9A9A9\E]P3FFFFFF\E]P4A9A9A9\E]P5
+ A9A9A9\E]P6A9A9A9\E]P9FFFFFF\E]PAFFFFFF\E]PBFFFFFF\E]
+ PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E[?2c,
+ use=linux-m1,
+
+linux-m2|Linux Minitel 2 "like" Couleurs (Vert/Blanc/Noir+Bleu),
+ ccc@,
+ colors@, ncv@, pairs@,
+ acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
+ uvvwwxxyyzz{{||}}~~,
+ bold=\E[33m, cnorm=\E[?2c\E[?25h, cvvis=\E[?8c\E[?25h,
+ enacs=\E)0, initc@,
+ is2=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P500A
+ 900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]PAFFFF
+ FF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF\E]PFFFFFF
+ F\E[;37m,
+ oc@, op@, rmacs=^O, setab=^A, setaf=^A, sgr0=\E[;37m, smacs=^N,
+ .setab@, .setaf@,
+ .smcup=\E]R\E]P100A900\E]P200A900\E]P3FFFFFF\E]P400A900\E]P5
+ 00A900\E]P600A900\E]P700A900\E]P80000FF\E]P9FFFFFF\E]
+ PAFFFFFF\E]PBFFFFFF\E]PCFFFFFF\E]PDFFFFFF\E]PEFFFFFF
+ \E]PFFFFFFF\E[;37m,
+ use=linux-m1,
+
+# From: Alexandre Montaron, 27 May 2020
+linux-s|Linux Console with added status line at bottom,
+ hs,
+ clear=\E[255;255H\E[A\E[1J\E[H, csr@,
+ dsl=\E7\E[255H\E[K\E8, ed@, fsl=\E8,
+ iprog=\sbash\s-c\s'echo\s-ne\s"\E[?6l\E[255H\E[A\E[6n"\s;
+ \sread\s-d\sR\sTMP\s;\sLINES=`echo\s$TMP\s|\scut\s-f1
+ \s-d\s";"\s|\scut\s-f2\s-d\s"["`\s;\sstty\srows\s$LINE
+ S\s;\secho\s-ne\s"\E[;"$LINES"r\E[J"',
+ rs1=\E]R, tsl=\E7\E[255;%p1%dH, .rc@, .sc@, use=linux,
+
+# Screen entries counterpart :
+
+screen.linux-m1|Linux m1 specific for screen,
+ ncv@,
+ dim=\E[2m, kbs=^?, kclr=\E\r, kdl1=\E\E[A, kf13=\E[25~,
+ kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+ kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kil1=\E\E[B, rmul@,
+ smul@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\EZ,
+ E3=\E[99H\E[2J\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
+ \n\n\n\n\n\n\n\n\n\n,
+ use=xterm+x11mouse, use=screen4,
+
+screen.linux-m1b|Linux m1b specific for screen,
+ colors@, pairs@,
+ op@, setab@, setaf@, setb@, setf@, use=screen.linux-m1,
+
+screen.linux-m2|Linux m2 specific for screen,
+ acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
+ uvvwwxxyyzz{{||}}~~,
+ use=screen.linux-m1b,
+
+# Putty :
+
+putty-m1|Putty Minitel 1 "like" Couleurs,
+ hs,
+ dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
+ smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
+ use=putty+screen, use=xterm+sl-twm, use=ecma+index,
+ use=linux-m1,
+
+putty-m1b|Putty Minitel 1B "like" Monochrome (Gris/Blanc/Noir),
+ hs,
+ dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
+ smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
+ use=putty+screen, use=xterm+sl-twm, use=ecma+index,
+ use=linux-m1b,
+
+putty-m2|Putty Minitel 2 "like" Couleurs (Vert/Blanc/Noir),
+ hs,
+ acsc=``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{
+ {||}}~~,
+ dim@, kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
+ kf5=\E[15~, rmcup=\E[2J\E[?47l\E8, rmul=\E[24m,
+ smcup=\E7\E[?47h, smul=\E[4m, .E3=\E[300S,
+ use=putty+screen, use=xterm+sl-twm, use=ecma+index,
+ use=linux-m2,
+
+putty+screen|PuTTY with screen resizing extensions,
+ .WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l,
+
+putty-screen|PuTTY with screen resizing extensions,
+ WS=\E[8;%p1%d;%p2%dt, Z0=\E[?3h, Z1=\E[?3l, use=putty,
+
+screen.putty-m1|Putty m1 specific for screen,
+ dim@, rmul=\E[24m, smul=\E[4m, E3@, use=screen.linux-m1,
+
+screen.putty-m1b|Putty m1b specific for screen,
+ colors@, pairs@,
+ op@, setab@, setaf@, setb@, setf@, use=screen.putty-m1,
+
+screen.putty-m2|Putty m2 specific for screen,
+ acsc=++\,\,--..00``aabbccddeeffgghhiijjkkllmmnnooppqqrrssttu
+ uvvwwxxyyzz{{||}}~~,
+ use=screen.putty-m1b,
+# From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
+#
+# He comments:
+# viewdata lacks a true cup capability,
+# so I achieved it with home and cud1/cuf1 sequences only !
+viewdata|prestel/viewdata terminals,
+ am, bw, eslok, hz,
+ cols#40, lines#24,
+ bel=^G, civis=^T, clear=^L, cnorm=^Q, cr=\r, cub1=^H, cud1=\n,
+ cuf1=^I,
+ cup=\036%?%p1%{07}%>%t\n\n\n\n\n\n\n\n%;%?%p1%{15}%>%t\n\n
+ \n\n\n\n\n\n%;%?%p1%{4}%&%t\n\n\n\n%;%?%p1%{2}%&%t\n\n%;
+ %?%p1%{1}%&%t\n%;%?%p2%{07}%>%t\011\011\011\011\011\011
+ \011\011%;%?%p2%{15}%>%t\011\011\011\011\011\011\011
+ \011%;%?%p2%{23}%>%t\011\011\011\011\011\011\011\011%;%?
+ %p2%{31}%>%t\011\011\011\011\011\011\011\011%;%?%p2%{4}
+ %&%t\011\011\011\011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&
+ %t\011%;,
+ cuu1=^K, home=^^, nel=\r\n, rs2=^L, .el=^X, .ind=\n,
+ .rep=%p1%c\022%p2%'?'%+%c, .ri=^K,
+
+viewdata-o|optimized version of viewdata prestel/viewdata terminals,
+ cup=\036%p1%?%p2%{20}%>%t%?%p1%{23}%=%t%Pa%{1}%e%{1}%+%;%;
+ %Pa%?%ga%{13}%<%t%?%ga%{07}%>%t\n\n\n\n\n\n\n\n%;%?%ga
+ %{4}%&%t\n\n\n\n%;%?%ga%{2}%&%t\n\n%;%?%ga%{1}%&%t\n%;%e
+ %{24}%ga%-%Pa%?%ga%{07}%>%t\013\013\013\013\013\013\013
+ \013%;%?%ga%{4}%&%t\013\013\013\013%;%?%ga%{2}%&%t\013
+ \013%;%?%ga%{1}%&%t\013%;%;%?%p2%{21}%<%t%?%p2%{07}%>%t
+ \011\011\011\011\011\011\011\011%;%?%p2%{15}%>%t\011
+ \011\011\011\011\011\011\011%;%?%p2%{4}%&%t\011\011\011
+ \011%;%?%p2%{2}%&%t\011\011%;%?%p2%{1}%&%t\011%;%e%{40}
+ %p2%-%Pa%?%ga%{07}%>%t\010\010\010\010\010\010\010\010%;
+ %?%ga%{15}%>%t\010\010\010\010\010\010\010\010%;%?%ga
+ %{4}%&%t\010\010\010\010%;%?%ga%{2}%&%t\010\010%;%?%ga
+ %{1}%&%t\010%;%?%p1%{23}%=%t\013%;%;,
+ .ll=^^^K, use=viewdata,
+
+# Samples with TERM=viewdata and TERM=viewdata-rv: http://canal.chez.com/blog/
+
+viewdata-rv|prestel/viewdata terminals with reverse capabilitie (as green),
+ xmc#1,
+ rmso=\EG, smso=\EB, use=viewdata-o,
######## OBSOLETE VDT TYPES
#
blit|jerq|blit running teletype rom,
am, eo, ul, xon,
cols#87, it#8, lines#72,
- bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
+ bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
- il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
+ il=\EF%p1%{32}%+%c, il1=\EF!, ind=\n, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
# (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
oblit|ojerq|first version of blit rom,
am, da, db, eo, mir, ul, xon,
cols#88, it#8, lines#72,
- bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
+ bel=^G, clear=^L, cr=\r, cub1=\ED, cud1=\n, cuf1=\EC,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
- ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
+ ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=\n, kbs=^H, rmir=\ER,
smir=\EQ,
#### Bolt, Beranek & Newman (bbn)
bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
OTbs, xenl,
cols#85, lines#64,
- bel=^G, clear=\E[H\E[J$<150>, cr=^M,
+ bel=^G, clear=\E[H\E[J$<150>, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
# (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
bg1.25|bbn bitgraph 1.25,
cols#85, lines#64,
- bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
+ bel=^G, clear=\E[H\E[J$<150>, cr=\r, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
- cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
- cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
+ cnorm=\E[r, cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
+ cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
- il1=\E[L, ind=^J, invis=\E[0;8m,
+ il1=\E[L, ind=\n, invis=\E[0;8m,
is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
- sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?
+ %p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
use=tws-generic,
dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
- sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;%?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;
+ %?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
#=========================================================#
am, eo, eslok, hs, km, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is1=\E[63;1"p\E[2h,
- is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
+ l,
is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
sc=\E7,
- sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
+ sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1
+ %;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
+ use=vt220+cvis,
bq300-rv|Bull vt320 reverse 80 columns,
flash=\E[?5l$<50>\E[?5h,
- is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
+ l,
use=bq300,
bq300-w|Bull vt320 132 columns,
cols#132, wsl#132,
- is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
+ l,
rs2=\E[?3h, use=bq300,
bq300-w-rv|Bull vt320 reverse mode 132 columns,
cols#132, wsl#132,
flash=\E[?5l$<50>\E[?5h,
- is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
+ l,
rs2=\E[?3h, use=bq300,
# This entry is used for terminals with vt320 emulation mode
am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
- clear=\233H\233J, cnorm=\233?25h, cr=^M,
+ bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=\r,
csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
- dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM,
+ dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
el=\233K, el1=\2331K, enacs=\E(B\E)0,
flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
- ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED,
- is1=\E[63;2"p\E[2h,
- is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
+ ind=\ED, is1=\E[63;2"p\E[2h,
+ is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
+ l,
is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
s0ds=\E(B, s1ds=\E(0, sc=\E7,
- sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
+ sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
+ 1%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
+ use=vt220+cvis8,
bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
flash=\233?5l$<50>\233?5h,
- is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
+ l,
use=bq300-8,
bq300-8w|Bull vt320 8-bit 132 columns,
cols#132, wsl#132,
- is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
+ l,
rs2=\233?3h, use=bq300-8,
bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
cols#132, wsl#132,
flash=\233?5l$<50>\233?5h,
- is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
+ l,
rs2=\233?3h, use=bq300-8,
# This entry is used for terminals with vt320 emulation mode
krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
flash=\E[?5l$<50>\E[?5h,
- is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
+ l,
use=bq300-pc,
bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
cols#132, wsl#132,
- is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
+ l,
rs2=\E[?3h, use=bq300-pc,
bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
cols#132, wsl#132,
flash=\E[?5l$<50>\E[?5h,
- is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sF\E[?42l\E[?4
+ l,
rs2=\E[?3h, use=bq300-pc,
# 8 bit ISO Latin Character Set (ISO 8859-1),
# 8 bit Control Characters,
kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
flash=\E[?5l$<50>\E[?5h,
- is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
+ l,
use=bq300-8-pc,
bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
cols#132, wsl#132,
- is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
+ l,
rs2=\E[?3h, use=bq300-8-pc,
bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
cols#132, wsl#132,
flash=\E[?5l$<50>\E[?5h,
- is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
+ is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E\sG\E[?42l\E[?4
+ l,
rs2=\E[?3h, use=bq300-8-pc,
#======================================================#
# CLR clear ^[`
# KBU keyboard unlock (set) ^[[W
# KBL keyboard lock (reset) ^[[X
-# CM character mode (async.) ^[k
+# CM character mode (async.) ^[k
# NEP non echoplex mode (by host) ^[l
-# EP echoplex mode (by host) ^[m
+# EP echoplex mode (by host) ^[m
# IM insert mode set ^[[I
-# IM insert mode reset ^[[J
-# RMS roll mode set ^[r
-# RMR roll mode reset ^[q
-# SM78 set mode vip7800 ^[[1q
-# SD scroll up (72 lines) ^[[0s
-# SD scroll down (72 lines) ^[[1s
+# IM insert mode reset ^[[J
+# RMS roll mode set ^[r
+# RMR roll mode reset ^[q
+# SM78 set mode vip7800 ^[[1q
+# SD scroll up (72 lines) ^[[0s
+# SD scroll down (72 lines) ^[[1s
# RBM block mode reset ^[[E
-# SLS status line set ^[w
-# SLR status line reset ^[v
-# SLL status line lock ^[O
-# LGS Line-graphic mode set ^[G
-# LGR Line-graphic mode reset ^[F
+# SLS status line set ^[w
+# SLR status line reset ^[v
+# SLL status line lock ^[O
+# LGS Line-graphic mode set ^[G
+# LGR Line-graphic mode reset ^[F
# TBC tab clear (at cursor pos.) ^[[g
-# TBI tab initialize ^[[N
+# TBI tab initialize ^[[N
# TBS tab set (at cursor pos.) ^[p
# PDS print data space ^[[0p
-# PHD print host data ^[[3p
+# PHD print host data ^[[3p
# PDT print data terminator ^[[<p
# PRES print adapter reset ^[[2p
# SSPR multi-part. reset ^[[<>u
# SSP0 partition 0 set ^[[00u
-# SSP1 partition n format 1 ^[[PnPnSTRINGu
-# SSP2 partition n format 2 ^[[PnPnSTRINGu
-# SSP3 partition n format 3 ^[[PnPnu
+# SSP1 partition n format 1 ^[[PnPnSTRINGu
+# SSP2 partition n format 2 ^[[PnPnSTRINGu
+# SSP3 partition n format 3 ^[[PnPnu
# ATR attribute (visual)
# blink : ^[sB
# dim : ^[sL
am, eslok, hs, km, mc5i, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3, wsl#80,
acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
- cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ cbt=\E[Z, clear=\E`, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
- hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
+ hts=\Ep, ich1=\E[I, ind=\n, invis=\EsH,
is2=\E[00u\E[<>001001024080024080u\E[01u,
is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
- mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
+ mc5=\E[3p, nel=\r, prot=\EsP, rev=\EsI,
ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
cg7900|chromatics|chromatics 7900,
am,
cols#80, lines#40,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^],
cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
- ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
- rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
+ ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=\n, ll=^A|,
+ rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40
+ \,,
rmso=\001C1\,\001c2\,,
- smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
- smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
+ smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARN
+ ING\sDOUBLE\sENTER\sESCAPE\sand\s\025\001C1\,\001c2\,
+ \001W0\,0\,79\,39\,,
+ smso=\001C4\,\001c7\,, uc=^A^A_^A\0,
#### Computer Automation
#
ca22851|computer automation 22851,
am,
cols#80, lines#24,
- bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
- cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
+ bel=^G, clear=\014$<8>, cr=\r, cub1=^U, cud1=\n, cuf1=^I,
+ cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=\n,
kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
#### Cybernex
cyb83|xl83|cybernex xl-83,
OTbs, am,
cols#80, lines#24,
- bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
+ bel=^G, clear=\014$<62>, cr=\r, cub1=^H, cud1=\n, cuf1=^I,
cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
- ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
- kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
+ ed=\020$<62>, el=\017$<3>, home=^K, ind=\n, kcub1=^H,
+ kcud1=\n, kcuf1=^I, kcuu1=^N, ri=^N,
# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
cyb110|mdl110|cybernex mdl-110,
OTbs, am,
cols#80, lines#24,
- bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
+ bel=^G, clear=\030$<70>, cr=\r, cub1=^H, cud1=\n, cuf1=^U,
cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
ht=\011$<43>, ich1=\016A\035$<3.5>,
- il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
+ il1=\016A\016\035$<65>, ind=\n, rmso=^NG, smso=^NF,
#### Datapoint
#
dp3360|datapoint|datapoint 3360,
OTbs, am,
cols#82, lines#25,
- bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
- ed=^_, el=^^, home=^], ind=^J,
+ bel=^G, clear=^]^_, cr=\r, cub1=^H, cud1=\n, cuf1=^X, cuu1=^Z,
+ ed=^_, el=^^, home=^], ind=\n,
# From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
# The Datapoint 8242 Workstation was sold at least between 1985
dp8242|datapoint 8242,
msgr,
cols#80, lines#25,
- bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
- cr=^M, cub1=^H, cud1=^J,
- cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
- home=^U, ht=^I, il1=\E^T, ind=^C,
+ bel=^G, civis=^Y, clear=^U\E^D^W^X, cnorm=^X, cr=\r, cub1=^H,
+ cud1=\n, cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z,
+ ed=^W, el=^V, home=^U, ht=^I, il1=\E^T, ind=^C,
is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
- kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
- kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
+ kf10=\EK\Ea, kf2=^I\Ed, kf3=\n\Ec, kf4=\n\Eb, kf5=^S\Ea,
+ kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=\r\n,
rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
smso=\E^E, smul=\E^F,
- wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
+ wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'
+ \0'%+%c\025,
#### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
#
-# These entries are DEC's official terminfos for its older terminals.
-# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
-# Engineering for more information. Updated terminfos and termcaps
-# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
+# These entries came from DEC's official terminfos for its older terminals
+# (which happen to be identical to the AT&T/SCO terminal descriptions),
+# Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support Engineering
+# may have had more information. Updated terminfos and termcaps were available
+# at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
+
+# DEC's terminfos did not describe the auxiliary keypad.
+#
+# DECScope of course had no "function keys", but this building block assigns
+# the three blank keys at the top of the auxiliary (numeric) keypad, using
+# the same analogy as vt100 (also lacking function-keys).
+#
+# These assignments use the same layout for 0-9 as vt100+keypad; the vt52
+# keypad had its cursor-keys on the right-column as shown -TD
+# _______________________________________
+# | PF1 | PF2 | PF3 | c-up |
+# | \EP | \EQ | \ER | \EA |
+# |_kf1__k1_|_kf2__k2_|_kf3__k3_|kcuu1_k4_|
+# | 7 8 9 c-down |
+# | \E?w | \E?x | \E?y | \EB |
+# |_kf9__k9_|_kf10_k;_|_kf0__k0_|kcud1____|
+# | 4 | 5 | 6 | c-right |
+# | \E?t | \E?u | \E?v | \EC |
+# |_kf5__k5_|_kf6__k6_|_kf7__k7_|kcuf1_k8_|
+# | 1 | 2 | 3 | c-left |
+# | \E?q | \E?r | \E?s | \ED |
+# |_ka1__K1_|_kb2__K2_|_ka3__K3_|kcub1____|
+# | 0 | . | enter |
+# | \E?p | \E?n | \E?M |
+# |___kc1_______K4____|_kc3__K5_|_kent_@8_|
#
+vt52+keypad|DECScope auxiliary keypad,
+ ka1=\E?q, ka3=\E?s, kb2=\E?r, kc1=\E?p, kc3=\E?n, kf0=\E?y,
+ kf1=\EP, kf2=\EQ, kf3=\ER, kf5=\E?t, kf6=\E?u, kf7=\E?v,
+ kf8=\E?w, kf9=\E?x,
gt40|dec gt40,
OTbs, os,
cols#72, lines#30,
- bel=^G, cr=^M, cub1=^H, cud1=^J,
+ bel=^G, cr=\r, cub1=^H, cud1=\n,
gt42|dec gt42,
OTbs, os,
cols#72, lines#40,
- bel=^G, cr=^M, cub1=^H, cud1=^J,
+ bel=^G, cr=\r, cub1=^H, cud1=\n,
+
vt50|dec vt50,
OTbs,
cols#80, lines#12,
- bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
+ bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
+ cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=\n, u8=\E/A, u9=\EZ,
vt50h|dec vt50h,
- OTbs,
- cols#80, lines#12,
- bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
- el=\EK, ht=^I, ind=^J, ri=\EI,
+ cub1=\ED, cud1=\EB, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+ kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, u8=\E/[HJ],
+ use=vt52+keypad, use=vt50,
+
# (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
vt61|vt-61|vt61.5|dec vt61,
cols#80, lines#24,
- bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
+ bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=\n,
cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
gigi|vk100|dec gigi graphics terminal,
OTbs, am, xenl,
cols#84, lines#24,
- bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ bel=^G, clear=\E[H\E[2J, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
- el=\E[K, ht=^I, ind=^J,
+ el=\E[K, ht=^I, ind=\n,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
dw1|decwriter I,
OTbs, hc, os,
cols#72,
- bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n,
dw2|decwriter|dw|decwriter II,
OTbs, hc, os,
cols#132,
- bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, ind=\n, kbs=^H,
# \E(B Use U.S. character set (otherwise # => british pound !)
# \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
-# \E[w 10 char/in pitch
+# \E[w 10 char/in pitch
# \E[1;132 full width horizontal margins
# \E[2g clear all tab stops
# \E[z 6 lines/in
dw3|la120|decwriter III,
OTbs, hc, os,
cols#132,
- bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n,
is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
- is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
+ is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u
+ \r,
kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
dw4|decwriter IV,
OTbs, am, hc, os,
cols#132,
- bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, ht=^I, ind=\n, is2=\Ec, kbs=^H,
kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
# These aren't official
ln03|dec ln03 laser printer,
hc,
cols#80, lines#66,
- bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
+ bel=^G, cr=\r, cud1=\n, hd=\EK, ht=^I, hu=\EL, ind=\n, nel=\r\n,
rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
smul=\E[4m,
ln03-w|dec ln03 laser printer 132 cols,
cols#132,
- bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
- kcud1=^J, nel=^M^J, use=ln03,
+ bel=^G, cr=\r, cud1=\n, ht=^I, ind=\n, kbs=^H, kcub1=^H,
+ kcud1=\n, nel=\r\n, use=ln03,
#### Delta Data (dd)
#
delta|dd5000|delta data 5000,
OTbs, am,
cols#80, lines#27,
- bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
- cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
- cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
+ bel=^G, clear=^NR, cub1=^H, cud1=\n, cuf1=^Y,
+ cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-
+ %{57}%+%c,
+ cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=\n,
#### Digital Data Research (ddr)
#
cols#80, it#8, lines#24, vt#3,
blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
- cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
+ cud1=\n, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
# Approximate date of release was 1982 (early 80s, anyway), and it had several
# evolutions including (limited) color versions such as the PS330C. PS300s
# were effectively obsolete by the late 80s, replaced by raster graphics
-# systems, although specialized applications like molecular modelling
+# systems, although specialized applications like molecular modeling
# hung onto them for a while longer. AFAIK all E&S vector graphics systems
# are out of production, though of course E&S is very much alive (in 1996).
# (ps300: changed ":pt@:" to "it@" -- esr)
ps300|Picture System 300,
xt,
it@,
- rmso@, rmul@, smso@, smul@, use=vt100,
+ rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
#### General Electric (ge)
#
terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
OTbs, hc, os,
cols#120,
- bel=^G, cr=^M, cud1=^J, ind=^J,
+ bel=^G, cr=\r, cud1=\n, ind=\n,
#### Heathkit/Zenith
#
h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
OTbs, am, mir, msgr,
cols#80, it#8, lines#24,
- acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
+ acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=\r, cub1=^H,
cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
- ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
+ ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=\n,
is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
OTbs, am, eslok, hs, mir, msgr,
cols#80, it#8, lines#24,
acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
- clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ clear=\EE, cnorm=\Ey4, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
- dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
- ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+ dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=\n,
+ ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
OTbs, OTpt, am, eslok, hs, mir, msgr,
OTkn#10, cols#80, lines#24,
OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
- cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
# cursor, bc -> block cursor.
# From: Mike Meyers
-# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
+# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
# looks vt100-compatible -- esr)
z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
OTbs, OTpt, am, eslok, hs, mir, msgr,
OTkn#10, cols#80, it#8, lines#24,
OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
- cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
- dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
- ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
- ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
- kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
- kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
- kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
- nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
- rmso=\E[m, rmul=\E[m,
- rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
+ dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
+ home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
+ il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
+ kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
+ kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
+ kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
+ mc0=\E#7, nel=\r\ED, rc=\E[r, rev=\E[7m, ri=\EM,
+ rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
+ rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m
+ \E[11m,
sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
-z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
- rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
+z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
+ rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
+ m,
use=z29a,
z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
- rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
+ rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m
+ \E[11m,
use=z29a,
z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
- rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
+ rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m
+ \E[11m,
use=z29a,
# From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
cols#80, lines#24,
acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
- clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
+ clear=\E[2J\E[H, cnorm=\E[>5l, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
- ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
+ ind=\n, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
OTbs, am, eslok, hs,
cols#80, it#8, lines#24,
- clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
+ clear=\EE, cub1=^H, cud1=\n, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
superbrain|intertec superbrain,
OTbs, am, bw,
cols#80, lines#24,
- OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
+ OTbc=^U, bel=^G, clear=\014$<5*>, cr=\r, cub1=^H, cud1=\n,
cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
- ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
- kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
+ ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=\n, kcub1=^U,
+ kcud1=\n, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
# and the reverse is actually true. Try it. -- esr)
intertube|intertec|Intertec InterTube,
OTbs, am,
cols#80, lines#25,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^F,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
- ind=^J, rmso=\E0@, smso=\E0P,
+ ind=\n, rmso=\E0@, smso=\E0P,
# The intertube 2 has the "full duplex" problem like the tek 4025: if you
# are typing and a command comes in, the keystrokes you type get interspersed
# with the command and it messes up
am, mir,
cols#80, it#8, lines#24,
clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
- cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+ cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
- kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
+ kf4=\EOS, khome=\E[H, nel=\r\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
smir=\E[4h, smso=\E[7m,
graphos-30|graphos III with 30 lines,
xenl@,
cols#80, lines#24,
cvvis=\E\^9;0s\E\^7;1s,
- is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
- rf@, ri=\EM\E[K$<5/>, use=vt100,
+ is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
+ ;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
+ \E\^11;81s\E\^11;89s,
+ rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
# The GX-1000 manual is dated 1984. This looks rather like a VT-52.
modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
am, da, db,
clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
- is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
+ is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E
+ \^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;7
+ 3s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;
+ 1s\E\^9;1s\E\^27;1,
ri=\EI$<5/>,
#
# Modgraph from Nancy L. Cider <nancyc@brl-tbd>
modgraph48|mod|Modgraph w/48 lines,
OTbs, OTpt, am, xenl,
cols#80, it#8, lines#48, vt#3,
- OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
- cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
+ OTnl=\n, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\n, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
am, mir, msgr, xon,
cols#80, it#8, lines#24,
acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
- cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
- cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
+ cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=\r, cub1=^H,
+ cud1=\n, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
- ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
+ ind=\n, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
- kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
+ kcuu1=^AJ\r, kdch1=^?, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
- kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
+ kcud1=\n, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
#### Omron
omron|Omron 8025AG,
OTbs, am, da, db,
cols#80, lines#24,
- bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
+ bel=^G, clear=\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC, cuu1=\EA,
cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
#### Ramtek
#
# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
-# were competition for things like the Tektronics 4025.
+# were competition for things like the Tektronix 4025.
#
# Ramtek 6221 from BRL, probably by Doug Gwyn
OTbs, OTpt, msgr, xon,
OTkn#4, cols#80, it#8, lines#24, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
- clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
+ clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=\r,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
- hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ hts=\EH, ind=\n, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
rmso=\E[m, rmul=\E[m,
- rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
+ rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h
+ \E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#
+ 5\E>,
sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
OTbs, OTpt, mir, msgr, xon,
OTkn#4, cols#80, it#8, lines#48, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
- cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ cr=\r, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
- rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
+ rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;1
+ 9l\E[r\E[m\E(B\017\E)0\E>,
sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
hirez100-w|Selanar HiREZ-100 in 132-column mode,
vsc|Signetics Vsc Video driver by RMC,
am, msgr,
cols#80, it#8, lines#26,
- clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+ clear=\E[;H\E[2J$<50/>, cr=\r, cub1=^H, cud1=\n, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
- ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
+ ht=^I, ind=\n, kbs=^H, kcub1=^H, kcud1=\n, nel=\r\n, rev=^_\s,
rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
#### Soroc
# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
soroc120|iq120|soroc|soroc iq120,
- clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
+ clear=\E*$<2>, cud1=\n, ed=\EY, el=\ET, kcub1=^H, kcud1=\n,
kcuf1=^L, kcuu1=^K, use=adm3a,
soroc140|iq140|soroc iq140,
OTbs, am, mir,
cols#80, lines#24,
- bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ bel=^G, cbt=\EI, clear=\E+, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
- dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
+ dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=\n,
kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
- kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
- rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
+ kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, rmso=\E^?,
+ rmul=\E^A, smir=\E9, smso=\E^?, smul=\E^A,
#### Southwest Technical Products
#
swtp|ct82|southwest technical products ct82,
am,
cols#82, lines#20,
- bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
+ bel=^G, clear=^L, cr=\r, cub1=^D, cud1=\n, cuf1=^S,
cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
- is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
+ is2=\034\022\036\023\036\004\035\027\011\023\036\035\036
+ \017\035\027\022\011,
ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
#### Synertek
tab132|tab|tab132-15|tab 132/15,
da, db,
OTdN@, cols#80, lines#24, lm#96,
- cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
+ cud1=\n, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
- kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
+ kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
+ use=vt100+4bsd,
tab132-w|tab132 in wide mode,
cols#132,
is2=\E[?7h\E[?3h\E[?5l, use=tab132,
t3700|dumb teleray 3700,
OTbs,
cols#80, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, ind=\n,
t3800|teleray 3800 series,
OTbs,
cols#80, it#8, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
- home=\EH, ht=^I, ind=^J, ll=\EY7\s,
+ home=\EH, ht=^I, ind=\n, ll=\EY7\s,
t1061|teleray|teleray 1061,
OTbs, am, km, xhp, xt,
cols#80, it#8, lines#24, xmc#1,
- bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ bel=^G, clear=\014$<1>, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
- ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
- is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
+ ich1=\EP, il1=\EL$<2*>, ind=\n, ip=$<0.4*>,
+ is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5
+ \EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
tbc=\EG,
t16|teleray 16,
am, da, db, mir, xhp, xt,
cols#80, lines#24,
- bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
+ bel=^G, clear=\E[H\E[2J, cr=\r, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
- ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
+ ind=\n, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
OTbs, hc, os,
cols#80,
- bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
+ bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, ind=\n,
+
+# Terminal entries for the Texas Instruments 703/707
+# hardcopy terminals.
+#
+# http://www.bitsavers.org/pdf/ti/terminal/silent_700/
+# Refer to:
+# Model 707 Data Terminal User's Manual
+#
+# pages 2-7 and 2-8 say that the model 707 prints 10.2 characters per inch
+# (cpi) (80 characters per line) by default, and can be switched to/from 17.0
+# cpi using an escape sequence. There is no 80/132-column capability in
+# terminfo (only the more general cpi which allows any value).
+ti703|ti707|Texas Instruments Silent 703/707,
+ am, hc, os, xenl,
+ cols#80, it#8,
+ bel=^G, cr=\r$<162>, cub1=^H, cud1=\n, cuf1=\s, ind=\n,
+ is2=\EPC\\, nel=\r\n,
+ti703-w|ti707-w|Texas Instruments Silent 703/707,
+ cols#132,
+ is2=\EPD\\, use=ti703,
#
# Texas Instruments 916 VDT 7 bit control mode
#
ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
da, db, in, msgr,
- cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
- cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
- cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
- dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
- ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
- enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
+ cbt=\E[Z, clear=\E[H\E[2J$<6>, cub=\E[%p1%dD,
+ cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, dch=\E[%p1%dP$<250>, dch1=\E[P,
+ dl=\E[%p1%dM, ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K,
+ el1=\E[1K, enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
- kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
+ kcmd=\E[29~, kdch1=\E[P, kent=\n, kf1=\E[17~, kf10=\E[28~,
kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
#
ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
- kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
+ kcuu1=\233A, kdch1=\233P, kent=\n, kf1=\23317~,
kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
OTbs, am, xon,
cols#80, it#8, lines#24,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r,
csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g,
+ smul=\E[4m, tbc=\E[3g, use=vt220+cvis,
ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
am, xon,
cols#80, it#8, lines#24,
- bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
- clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, cr=\r,
csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
- kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
- kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
- kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
- rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
+ kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
+ kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
+ rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt220+cvis,
ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
cols#132, use=ti924,
ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
ti931|Texas Instruments 931 VDT,
OTbs, am, xon,
cols#80, lines#24,
- bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
+ bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=\r, cub1=\ED,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
am, bce, eo, xenl, xon,
colors#8, cols#80, it#8, lines#25, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
- cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
+ cr=\r, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
zen30|z30|zentec 30,
OTbs, am, mir, ul,
cols#80, lines#24,
- bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ bel=^G, clear=\E*, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
- il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
+ il1=\EE$<1.5*>, ind=\n, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
smul@, use=adm+sgr,
# (zen50: this had extension capabilities
# :BS=^U:CL=^V:CR=^B:
cols#80, lines#24, xmc#1,
clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
- invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
+ invis@, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K, khome=^^,
rmul@, smul@, use=adm+sgr,
# CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
OTbs, am, bw,
cols#80, lines#24,
blink=\EM", clear=\EH\EJ, cnorm=\EP,
- csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
+ csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\n,
cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
apollo_color|apollo color display,
rmir@, smir@, use=vt132,
+#### AT&T consoles
+
+# This actually describes the generic SVr4 display driver for Intel boxes.
+# The <dim=\E[2m> isn't documented and therefore may not be reliable.
+# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
+att6386|at386|386at|AT&T WGS 6386 console,
+ am, bw, eo, xon,
+ cols#80, it#8, lines#25,
+ acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
+ clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub=\E[%p1%dD,
+ cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+ dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+ ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, invis=\E[9m,
+ is2=\E[0;10;39m, kbs=^H, kcbt=^], kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kend=\E[Y, kf1=\EOP,
+ kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR,
+ kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX,
+ khome=\E[H, kich1=\E[@, knp=\E[U, kpp=\E[V, krmir=\E0,
+ nel=\r\E[S, rc=\E8, rev=\E[7m, ri=\E[T, rmacs=\E[10m,
+ rmso=\E[m, rmul=\E[m, sc=\E7,
+ sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;
+ 2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
+ sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
+ tbc=\E[3g, vpa=\E[%i%p1%dd, use=ecma+index,
+ use=klone+color,
+# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
+pc6300plus|AT&T 6300 plus,
+ OTbs, am, xon,
+ cols#80, lines#24,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
+ clear=\E[2J\E[H, cnorm=\E[=1C, cr=\r, cub1=^H, cud1=\E[B,
+ cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
+ dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
+ home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=\n,
+ invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+ kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
+ kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
+ nel=\r\n, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
+ smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+
+# From: Benjamin C. W. Sittler <bsittler@nmt.edu>
+#
+# I have a UNIX PC which I use as a terminal attached to my Linux PC.
+# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
+# is broken. All the special key sequences are broken, making it unusable
+# with Emacs. The problem stems from the following:
+#
+# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
+# keypad!), loadable fonts, and strange highlighting modes ("dithered"
+# half-intensity, "smeared" bold, and real strike-out, for example.) It also
+# uses resizable terminal windows, but the bundled terminal program always
+# uses an 80x24 window (and doesn't support seem to support a 132-column
+# mode.)
+#
+# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
+# library which was a superset of SVr3.5 curses (called tam, for "terminal
+# access method".) tam includes support for real, overlapping windows,
+# onscreen function key labels, and bitmap graphics. But since the primary
+# user interface on the UNIX PC was a GUI program (ua, for "user
+# assistant",) and remote administration was considered important for the
+# machine, tam also supported VT100-compatible terminals attached to the
+# serial port or used across the StarLan network. To simulate the extra keys
+# not present on a VT100, users could press ESC and a two-letter sequence,
+# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
+# however, were not the same as those sent by the actual Undo key. The
+# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
+# (If you're interested in adding some of the tam calls to ncurses, btw, I
+# have the full documentation and several programs which use tam. It also
+# used an extended terminfo format to describe key sequences, special
+# highlighting modes, etc.)
+#
+# KEYS: This means that ncurses would quite painful on the UNIX PC, since
+# there are two sequences for every key-modifier combination (local keyboard
+# sequence and remote "VT100" sequence.) But I doubt many people are trying
+# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
+# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
+# seem to have been built from the manual describing the VT100 sequences.
+# This means it doesn't work for a real live UNIX PC.
+#
+# FONTS: The UNIX PC also has a strange interpretation of "alternate
+# character set". Rather than the VT100 graphics you might expect, it allows
+# up to 8 custom fonts to be loaded at any given time. This means that
+# programs expecting VT100 graphics will usually be disappointed. For this
+# reason I have disabled the smacs/rmacs sequences, but they could easily be
+# re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
+# manpage), should you wish to do so:
+#
+# SGR10 - Select font 0 - ESC [ 10 m or SO
+# SGR11 - Select font 1 - ESC [ 11 m or SI
+# SGR12 - Select font 2 - ESC [ 12 m
+# ... (etc.)
+# SGR17 - Select font 7 - ESC [ 17 m
+#
+# Graphics for line drawing are not reliably found at *any* character
+# location because the UNIX PC has dynamically reloadable fonts. I use font
+# 0 for regular text and font 1 for italics, but this is by no means
+# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
+#
+# MISC: The cursor visible/cursor invisible sequences were swapped in the
+# distributed terminfo.
+#
+# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
+# the UNIX PC terminfo entry. The modified version works great with Lynx,
+# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
+# attached by serial cable. In Emacs, even the Undo key works, and many
+# applications can now use the F1-F8 keys.
+#
+# esr's notes:
+# Terminfo entry for the AT&T Unix PC 7300
+# from escape(7) in Unix PC 7300 Manual.
+# Somewhat similar to a vt100-am (but different enough
+# to redo this from scratch.)
+#
+# /***************************************************************
+# *
+# * FONT LOADING PROGRAM FOR THE UNIX PC
+# *
+# * This routine loads a font defined in the file ALTFONT
+# * into font memory slot #1. Once the font has been loaded,
+# * it can be used as an alternative character set.
+# *
+# * The call to ioctl with the argument WIOCLFONT is the key
+# * to this routine. For more information, see window(7) in
+# * the PC 7300 documentation.
+# ***************************************************************/
+# #include <string.h> /* needed for strcpy call */
+# #include <sys/window.h> /* needed for ioctl call */
+# #define FNSIZE 60 /* font name size */
+# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
+# /*
+# * The file /usr/lib/wfont/special.8.ft comes with the
+# * standard PC software. It defines a graphics character set
+# * similar to that of the Teletype 5425 terminal. To view
+# * this or other fonts in /usr/lib/wfont, use the command
+# * cfont <filename>. For further information on fonts see
+# * cfont(1) in the PC 7300 documentation.
+# */
+#
+# struct altfdata /* structure for alt font data */
+# {
+# short altf_slot; /* memory slot number */
+# char altf_name[FNSIZE]; /* font name (file name) */
+# };
+# ldfont()
+# {
+# int wd; /* window in which altfont will be */
+# struct altfdata altf;
+# altf.altf_slot=1;
+# strcpy(altf.altf_name,ALTFONT);
+# for (wd =1; wd < 12; wd++) {
+# ioctl(wd, WIOCLFONT,&altf);
+# }
+# }
+#
+# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
+# they're confirmed by the man page for the System V display---esr)
+#
+att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
+ am, xon,
+ cols#80, it#8, lines#24,
+ bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
+ clear=\E[2J\E[H, cnorm=\E[=0C, cr=\r, cub=\E[%p1%dD,
+ cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+ cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+ cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
+ ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
+ il1=\E[L, ind=\n, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
+ kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
+ kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
+ kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
+ kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
+ kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
+ kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
+ ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
+ kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+ kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
+ kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
+ kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
+ kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
+ ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
+ rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
+ smul=\E[4m,
+
#### Convergent Technology
#
# Burroughs bought Convergent shortly before it merged with Univac.
aws|Convergent Technologies AWS workstation under UTX and Xenix,
am,
OTug#0, cols#80, lines#28, xmc#0,
- OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
+ OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=\n, acsc=,
clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
qdss|qdcons|qdss glass tty,
OTbs, am,
cols#128, lines#57,
- clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
+ clear=\032$<1/>, cub1=^H, cud1=\n, cuf1=^L,
cup=\E=%p1%c%p2%c, cuu1=^K,
#### Fortune Systems consoles
OTbs, am, bw,
cols#80, lines#25,
acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
- clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
+ clear=\014$<20>, cnorm=\E\\, cr=\r, cub1=^H, cud1=\n$<3>,
cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
- ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
+ ich1=\034Q$<5>, il1=\034E$<15>, ind=\n, is2=^_.., kbs=^H,
kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
- khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
+ khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=\r\n, rev=\EH,
rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
smso=^\H`, smul=^\HP,
#### Masscomp consoles
#
-# Masscomp has gone out of business. Their product line was purchased by
-# comany in Georgia (US) called "XS International", parts and service may
+# Masscomp has gone out of business. Their product line was purchased by a
+# company in Georgia (US) called "XS International", parts and service may
# still be available through them.
#
masscomp2|masscomp large screen version 2,
cols#64, lines#21, use=masscomp,
+#### OSF Unix
+#
+
+# OSF/1 1.1 Snapshot 2
+pmcons|pmconsole|PMAX console,
+ am,
+ cols#128, lines#57,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuu1=^K, ht=^I,
+ ind=\n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+
+#### Other consoles
+# The following is a version of the ibm-pc entry distributed with PC/IX,
+# (Interactive Systems' System 3 for the Big Blue), modified by Richard
+# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
+# (the former is untrue, and the latter failed under UCB/man); standout and
+# underline modes have been added. Note: this entry describes the "native"
+# capabilities of the PC monochrome display, without ANY emulation; most
+# communications packages (but NOT PC/IX connect) do some kind of emulation.
+pcix|PC/IX console,
+ am, bw, eo,
+ cols#80, lines#24,
+ clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+ home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
+ smul=\E[4m,
+
+# (ibmpcx: this entry used to be known as ibmx.
+# It formerly included the following extension capabilities:
+# :GC=b:GL=v:GR=t:RT=^J:\
+# :GH=\E[196g:GV=\E[179g:\
+# :GU=\E[193g:GD=\E[194g:\
+# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
+# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
+# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
+# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
+# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
+# what was there before. -- esr)
+ibmpcx|xenix|ibmx|IBM PC xenix console display,
+ OTbs, am, msgr,
+ cols#80, lines#25,
+ clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
+ cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+ ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
+ kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
+ kpp=\E[Z, use=klone+acs, use=klone+sgr8,
+
######## OTHER OBSOLETE TYPES
#
# These terminals are *long* dead -- these entries are retained for
pairs#63, pb#19200, vt#6,
bel=^G, blink=\E&dA%{1}%PA,
bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
- clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
- il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
+ il1=\EL, ind=\n, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
- op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
+ op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV
+ %{1}%PU,
rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
- setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
- setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
- sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
+ setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t
+ \E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb
+ %{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1
+ %{4}%&%t\E&br%{1}%e%{0}%;%PX,
+ setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t
+ \E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB
+ %{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1
+ %{4}%&%t\E&bR%{1}%e%{0}%;%PU,
+ sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB
+ %{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2
+ %t\E&dD%;,
sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
am, bce, msgr, xon,
colors#8, cols#80, it#8, lines#24, pairs#63,
- acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+ acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyz
+ z{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=\r,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
- ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\n,
is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
# Software (formerly Peripherals Computers & Supplies, Inc) of
# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
# also be reached at support@synergy.com.
-versaterm|versaterm vt100 emulator for the macintosh,
+versaterm|versaterm vt100 emulator for the Macintosh,
am, xenl,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
- clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
+ clear=\E[;H\E[2J$<50/>, cr=\r, csr=\E[%i%p1%d;%p2%dr,
+ cub1=^H, cud1=\n, cuf1=\E[C$<2/>,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
- kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
+ kf3=\EOR, kf4=\EOS, nel=\r\n, rc=\E8, rev=\E[7m$<2/>,
rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
am, mir, msgr, xon,
cols#80, it#8, lines#24, vt#3, xmc#1,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ bel=^G, clear=\E[H\E[J$<50>, cr=\r, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
- il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
+ il1=\E[L$<99>, ind=\n, kbs=^H, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m\s,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
simterm|attpc running simterm,
am,
cols#80, lines#24,
- bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+ bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
- dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
+ dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=\n, rmcup=\EVE,
rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
#### Daisy wheel printers
diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
hc, os,
cols#132, it#8,
- cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
+ cub1=^H, cud1=\n, cuu1=\E\n, hd=\ED, hpa=\E\011%i%p1%c,
ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
cols#124,
dtc382|DTC 382,
am, da, db, xhp,
cols#80, lines#24, lm#96,
- bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
+ bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P\r, cub1=^H,
cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
- dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
- home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
- rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
+ dch1=^X, dl1=^P^S, ed=^P^U^P^S^P^S, el=^P^U, home=^P^R,
+ il1=^P^Z, ind=\n, pad=^?, rmcup=, rmir=^Pi, rmul=^P \0,
+ smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
dtc300s|DTC 300s,
hc, os,
cols#132,
- bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
- hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
+ hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
gsi|mystery gsi terminal,
hc, os,
cols#132,
- bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
- ind=^J,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
+ ind=\n,
aj830|aj832|aj|anderson jacobson,
hc, os,
- bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
- ind=^J,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E7, hd=\E9, hu=\E8,
+ ind=\n,
# From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
aj510|Anderson-Jacobson model 510,
am, mir,
cols#80, lines#24,
clear=^L, cub1=^H, cuf1=\EX,
cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
- dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
+ dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
- kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
+ kcuf1=\EX, kcuu1=\EY, pad=^?, rmcup=\E"N, rmir=\E'J,
rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
smul=\E"U,
# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
nec5520|nec|spinwriter|nec 5520,
hc, os,
cols#132, it#8,
- bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
- hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=\E9, ff=^L,
+ hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=\n,
kbs=^H, tbc=\E3,
qume5|qume|Qume Sprint 5,
hc, os,
cols#80, it#8,
- bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
- hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
+ hts=\E1, hu=\EH, ind=\n, kbs=^H, tbc=\E3,
# I suspect the xerox 1720 is the same as the diablo 1620.
xerox1720|x1720|x1750|xerox 1720,
hc, os,
cols#132, it#8,
- bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, ff=^L, ht=^I, hts=\E1, ind=\n,
tbc=\E2,
#### Miscellaneous obsolete terminals, manufacturers unknown
cops10|cops|cops-10|cops 10,
am, bw,
cols#80, lines#24,
- bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+ bel=^G, clear=\030$<30/>, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
- ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
+ ind=\n, kbs=^H, kcub1=^H, kcud1=\n, kcuf1=^L, kcuu1=^K,
khome=^Y,
# (d132: removed duplicate :ic=\E5:,
# merged in capabilities from a BRL entry -- esr)
d132|datagraphix|datagraphix 132a,
da, db, in,
cols#80, lines#30,
- bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
+ bel=^G, clear=^L, cnorm=\Em\En, cr=\r, cub1=^H, cud1=\n,
cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
- dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
- kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
+ dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=\n, kbs=^H,
+ kcub1=^H, kcud1=\n, nel=\r\n, ri=\Ew,
# The d800 was an early portable terminal from c.1984-85 that looked a lot
# like the original Compaq `lunchbox' portable (but no handle). It had a vt220
# mode (which is what this entry looks like) and several other lesser-known
OTbs, am, da, db, msgr, xhp,
cols#80, it#8, lines#24,
acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
- bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
- cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+ bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=\r, cub1=^H,
+ cud1=\n, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
digilog|digilog 333,
OTbs,
cols#80, lines#16,
- bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
- home=^N, ind=^J,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, cuf1=^I, cuu1=^O, el=^X,
+ home=^N, ind=\n,
# The DWK was a terminal manufactured in the Soviet Union c.1986
dwk|dwk-vt|dwk terminal,
am,
cols#80, it#8, lines#24,
- acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
- bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
+ acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv
+ \\wKxW~_,
+ bel=^G, clear=\EH\EJ, cr=\r, cub1=^H, cud1=\n, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
- ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
+ ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=\n, kbs=^?,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
- kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
+ kpp=\Eg, nel=\r\n, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
sgr0=\EX, smacs=\EF, smso=\ET,
env230|envision230|envision 230 graphics terminal,
xenl@,
enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
- sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
- sgr0=\E[0m$<2>, smacs@, use=vt100,
+ sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
+ 1%;m$<2>,
+ sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,
# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
# coupler attached, the whole rig fitting in a suitcase and more or less
# portable. Hot stuff for c.1977 :-) -- esr
ep48|ep4080|execuport 4080,
OTbs, am, os,
cols#80,
- bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
+ bel=^G, cr=\r, cub1=^H, cud1=\n, hd=^\, hu=^^, ind=\n,
ep40|ep4000|execuport 4000,
cols#136, use=ep4080,
# Adam Thompson <athompso@pangea.ca> tells us:
ifmr|Informer D304,
OTbs, am,
cols#80, lines#24,
- clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
+ clear=\EZ, cub1=^H, cud1=\n, cuf1=\EC,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
smso=\EJ,
am, bw, hs, km, mir, msgr, ul, xon,
cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
- cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
- cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
+ cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=\r,
+ cub1=^H, cud1=\n, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
- ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
- hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
+ ed=\EY$<100>, el=\ET, fsl=\r, home=\036$<2>, ht=\011$<5>,
+ hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=\n,
ip=$<3>,
- is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
+ is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B
+ \177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F
+ \177\EA1*\EZH12,
kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
rs3=\EwG\Ee($<150>,
- sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
+ sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2
+ %t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|
+ %t%{64}%|%;%?%p7%t%{1}%|%;%c,
sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
- smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
+ smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177
+ \Ezz<\E[Q\177,
smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
uc=\EG8\EG0, use=adm+sgr,
teletec|Teletec Datascreen,
OTbs, am,
cols#80, lines#24,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
- home=^^, ind=^J,
+ bel=^G, clear=^L, cr=\r, cub1=^H, cud1=\n, cuf1=^_, cuu1=^K,
+ home=^^, ind=\n,
# From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
# This description is for the LANPAR Technologies VISION 3220
# terminal from 1984/85. The function key definitions k0-k5 represent the
# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
# Coded Character Sets"), include your snail-mail address, and you should
-# receive the document in due course. Don't expect an email acknowledgement.
+# receive the document in due course. Don't expect an email acknowledgment.
#
# Related standards include "X3.4-1977: American National Standard Code for
# Information Interchange" (the ASCII standard) and "X3.41.1974:
# sequences. In the main table, \E stands for an escape (\033) character,
# SPC for space. Pn stands for a single numeric parameter to be inserted
# in decimal ASCII. Ps stands for a list of such parameters separated by
-# semicolons. Parameter meanings for most parametrized sequences are
-# decribed in the notes.
+# semicolons. Parameter meanings for most parameterized sequences are
+# described in the notes.
#
# Sequence Sequence Parameter or
# Mnemonic Name Sequence Value Mode terminfo
# APC Applicatn Program Command \E _ - Delim -
# BEL Bell * ^G - - bel
# BPH Break Permitted Here * \E B - * -
-# BS Backpace * ^H - EF -
+# BS BackSpace * ^H - EF -
# CAN Cancel * ^X - - - (A)
# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
# CCH Cancel Previous Character \E T - - -
# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
# abbreviation.
#
-# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
-# char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
-# 5 = clear all char tabs, 6 = clear all line tabs.
+# (F) CTC parameter values:
+# 0 = set char tab,
+# 1 = set line tab,
+# 2 = clear char tab,
+# 3 = clear line tab,
+# 4 = clear all char tabs on current line,
+# 5 = clear all char tabs,
+# 6 = clear all line tabs.
#
# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
# abbreviation.
#
-# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
-# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
-# DSR, 6 = request CPR response.
+# (I) DSR parameter values:
+# 0 = ready,
+# 1 = busy,
+# 2 = busy, will send DSR later,
+# 3 = malfunction,
+# 4 = malfunction, will send DSR later,
+# 5 = request DSR,
+# 6 = request CPR response.
#
-# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
-# 1 = clear from beginning, 2 = clear.
+# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
+# 0 = clear to end,
+# 1 = clear from beginning,
+# 2 = clear.
#
# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
#
# (N) ECMA-48 calls this "Character Tabulation" but retains the HT
# abbreviation.
#
-# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
-# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
-# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
-# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
-# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
-# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
-# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
-# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
-# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
-# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
-# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
-# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
-# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
-# 61-65 = variable highlights for ideograms.
+# (O) SGR parameter values:
+# 0 = default mode (attributes off),
+# 1 = bold,
+# 2 = dim,
+# 3 = italicized,
+# 4 = underlined,
+# 5 = slow blink,
+# 6 = fast blink,
+# 7 = reverse video,
+# 8 = invisible,
+# 9 = crossed-out (marked for deletion),
+# 10 = primary font,
+# 10 + n (n in 1..9) = nth alternative font,
+# 20 = Fraktur,
+# 21 = double underline,
+# 22 = turn off 2,
+# 23 = turn off 3,
+# 24 = turn off 4,
+# 25 = turn off 5,
+# 26 = proportional spacing,
+# 27 = turn off 7,
+# 28 = turn off 8,
+# 29 = turn off 9,
+# 30 = black fg,
+# 31 = red fg,
+# 32 = green fg,
+# 33 = yellow fg,
+# 34 = blue fg,
+# 35 = magenta fg,
+# 36 = cyan fg,
+# 37 = white fg,
+# 38 = set fg color as in CCITT T.416,
+# 39 = set default fg color,
+# 40 = black bg
+# 41 = red bg,
+# 42 = green bg,
+# 43 = yellow bg,
+# 44 = blue bg,
+# 45 = magenta bg,
+# 46 = cyan bg,
+# 47 = white bg,
+# 48 = set bg color as in CCITT T.416,
+# 49 = set default bg color,
+# 50 = turn off 26,
+# 51 = framed,
+# 52 = encircled,
+# 53 = overlined,
+# 54 = turn off 51 & 52,
+# 55 = not overlined,
+# 56-59 = reserved,
+# 61-65 = variable highlights for ideograms.
#
# (P) SI is also called LSO, Locking Shift Zero.
#
# use CUD for this function and ignore VPR. ECMA calls it `Line Position
# Absolute' but retains the VPA abbreviation.
#
-# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
-# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
-# from secondary aux device, 4 = stop relay to primary aux device, 5 =
-# start relay to primary aux device, 6 = stop relay to secondary aux device,
-# 7 = start relay to secondary aux device.
+# (S) MC parameters:
+# 0 = start xfer to primary aux device,
+# 1 = start xfer from primary aux device,
+# 2 = start xfer to secondary aux device,
+# 3 = start xfer from secondary aux device,
+# 4 = stop relay to primary aux device,
+# 5 = start relay to primary aux device,
+# 6 = stop relay to secondary aux device,
+# 7 = start relay to secondary aux device.
#
# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
# abbreviation.
#
# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
#
-# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
-# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
-# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
-# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
-# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
-# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
-# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
-# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
-# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
-# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
-# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
-# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
-# from ECMA-48's 5th edition but are listed here for reference.
+# (W) RM/SM modes are as follows:
+# 1 = Guarded Area Transfer Mode (GATM),
+# 2 = Keyboard Action Mode (KAM),
+# 3 = Control Representation Mode (CRM),
+# 4 = Insertion Replacement Mode (IRM),
+# 5 = Status Report Transfer Mode (SRTM),
+# 6 = Erasure Mode (ERM),
+# 7 = Line Editing Mode (LEM),
+# 8 = Bi-Directional Support Mode (BDSM),
+# 9 = Device Component Select Mode (DCSM),
+# 10 = Character Editing Mode (HEM),
+# 11 = Positioning Unit Mode (PUM),
+# 12 = Send/Receive Mode (SRM),
+# 13 = Format Effector Action Mode (FEAM),
+# 14 = Format Effector Transfer Mode (FETM),
+# 15 = Multiple Area Transfer Mode (MATM),
+# 16 = Transfer Termination Mode (TTM),
+# 17 = Selected Area Transfer Mode (SATM),
+# 18 = Tabulation Stop Mode (TSM),
+# 19 = Editing Boundary Mode (EBM),
+# 20 = Line Feed New Line Mode (LF/NL),
+# 21 = Graphic Rendition Combination Mode (GRCM),
+# 22 = Zero Default Mode (ZDM).
+#
+# The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
+# but are listed here for reference.
#
# (X) Select Alternate Presentation Variants is used only for non-Latin
# alphabets.
# (including the System V console) support an attribute 6 that undoes this
# braindamage (this is required by iBCS2).
#
-# * Some older versions of ANSI.SYS have a bug that causes thems to require
+# * Some older versions of ANSI.SYS have a bug that causes them to require
# ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
# compatible.)
# terminfo entry are followed with the corresponding capability in parens:
#
# CSI <n>k disable (n=0) or enable (n=1) keyclick
-# CSI 2h lock keyboard
-# CSI 2i send screen as input
-# CSI 2l unlock keyboard
-# CSI 6m enable background color intensity
+# CSI 2h lock keyboard
+# CSI 2i send screen as input
+# CSI 2l unlock keyboard
+# CSI 6m enable background color intensity
# CSI <0-2>c reserved
# CSI <0-59>m select graphic rendition
# CSI <n>;<m>H (cup) cursor to line n and column m
# CSI <n>e cursor down n lines and in first column
# CSI <n>g (cbt) clear all tabs
# CSI <n>z make virtual terminal n active
-# CSI ?7h (smam) turn automargin on
-# CSI ?7l (rmam) turn automargin off
-# CSI s save cursor position
-# CSI u restore cursor position to saved value
+# CSI ?7h (smam) turn automargin on
+# CSI ?7l (rmam) turn automargin off
+# CSI s save cursor position
+# CSI u restore cursor position to saved value
# CSI =<c>A set overscan color
# CSI =<c>F set normal foreground color
# CSI =<c>G set normal background color
# CSI =<s>;<e>C set cursor parameters
# CSI =<x>D enable/disable intensity of background color
# CSI =<x>E set/clear blink vs. bold background
-# CSI 7 (sc) (sc) save cursor position
-# CSI 8 (rc) (rc) restore cursor position to saved value
+# CSI 7 (sc) (sc) save cursor position
+# CSI 8 (rc) (rc) restore cursor position to saved value
# CSI H (hts) (hts) set tab stop
# CSI Q<n><string> define function key string
# (string must begin and end with delimiter char)
-# CSI c (clear) clear screen
+# CSI c (clear) clear screen
#
# The lack of any specification for attributes in SGR (among other things)
# makes this a wretchedly weak standard. The table above is literally
# assigned in System V terminfo. There are some variant extension sets out
# there. We try to describe them here.
#
-# XENIX extensions:
+#### XENIX extensions:
#
# The XENIX extensions include a set of function-key capabilities as follows:
#
# CL key_char_left
# CR key_char_right
# CW key_change_window create_window
-# EN key_end kend
+# EN key_end kend
# HM key_home khome
# HP ??
-# LD key_delete_line kdl1
-# LF key_linefeed label_off
+# LD key_delete_line kdl1
+# LF key_linefeed label_off
# NU key_next_unlocked_cell
-# PD key_page_down knp
+# PD key_page_down knp
# PL ??
# PN start_print mc5
# PR ??
# PS stop_print mc4
-# PU key_page_up kpp pulse
+# PU key_page_up kpp pulse
# RC key_recalc remove_clock
# RF key_toggle_ref req_for_input
-# RT key_return kent
-# UP key_up_arrow kcuu1 parm_up_cursor
+# RT key_return kent
+# UP key_up_arrow kcuu1 parm_up_cursor
# WL key_word_left
# WR key_word_right
#
# When translating a termcap file, ncurses tic will do this automatically.
# The double forms characters don't fit the SVr4 terminfo model.
#
-# AT&T Extensions:
+#### AT&T Extensions:
#
# The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
# nonstandard capabilities. Its signature is the KM capability, used to name
# FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
# cursor invisible), and CV=:ve: (make cursor normal).
#
-# HP Extensions
+#### HP Extensions
#
# The HP library (as of mid-1995, their term.h file version 70.1) appears to
# have the System V capabilities up to SVr1 level. After that, it supports
# label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
# HP binary format incompatible with SVr4's.
#
-# IBM Extensions
+#### IBM Extensions
#
# There is a set of nonstandard terminfos used by IBM's AIX operating system.
# The AIX terminfo library diverged from SVr1 terminfo, and replaces all
-# capabilities following prtr_non with the following special capabilties:
+# capabilities following prtr_non with the following special capabilities:
# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
# The box2 characters are the double-line versions of these forms graphics.
# The AIX binary terminfo format is incompatible with SVr4's.
#
-# Iris console extensions:
+#### Iris console extensions:
#
# HS is half-intensity start; HE is half-intensity end
# CT is color terminal type (for Curses & rogue)
#
# The ncurses tic utility recognizes HS as an alias for mh <dim>.
#
-# TC Extensions:
+#### TC Extensions:
#
# There is a set of extended termcaps associated with something
# called the "Terminal Control" or TC package created by MainStream Systems,
# CF for civis and CO for cvvis. Finally, they define a boolean :ct:
# that flags color terminals.
#
+######## NCURSES USER-DEFINABLE CAPABILITIES
+#
# Extensions added after ncurses 5.0 generally use the "-x" option of tic and
# infocmp to manipulate user-definable capabilities. Those that are intended
# for use in either terminfo or termcap use 2-character names. Extended
# function keys do not use 2-character names, and are available only with
# terminfo.
#
-# As of mid-2012, no other terminfo/termcap implementation than ncurses
-# supports this extension; termcap libraries can as noted above make limited
-# use of the feature.
+# Beginning in 2010, NetBSD curses has also provided a "-x" option for
+# tic/infocmp, and uses this database (with a few changes). There are a few
+# differences, noted in
+# https://invisible-island.net/ncurses/ncurses-netbsd.html
#
-# ncurses makes explicit checks for a few user-definable capabilities: AX, U8,
-# XM.
+# ncurses makes explicit checks for a few user-definable capabilities: AX,
+# RGB, U8, XM, which are documented in the user_caps(5) manual page.
#
-# SCREEN Extensions:
+#### SCREEN Extensions:
#
# The screen program uses the termcap interface. It recognizes a few useful
# nonstandard capabilities. Those are used in this file.
# "default".
#
# XT is harder, since screen's manpage does not give more details. For that,
-# we must read screen's source-code. When XT is set, screen assumes
+# we must read screen's source-code. For example, when XT is set, screen
+# assumes
#
# a) OSC 1 sets the title string, e.g., for the icon. Recent versions of
# screen may also set the terminal's name, which is (for xterm) distinct
# sequence. However, because screen uses only termcap, the values returned
# by Af/Ab are not usable because they rely on expressions that termcap
# does not support. Therefore, screen uses a hardcoded string to work
-# around the limitation.
+# around the limitation. In a few cases, screen also uses tparm, which
+# is a terminfo function rather than termcap.
# f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
+# g) screen also uses the feature to decide whether to pay attention to other
+# xterm-related features which are unrelated to the description in the
+# manual page.
+#
+# Since XT is useful only when the outer terminal matches screen's assumptions,
+# it is appropriate to use it in the derived terminal descriptions such as
+# "screen.xterm", but not in the generic "screen", "screen-bce" entries.
#
# The other ISO-2022 features are rarely used, but provided here to make
# screen's termcap features available.
#
-# XTERM Extensions:
+#### XTERM Extensions:
#
-# Most of the xterm extensions are for function-keys. Since patch #94 (in
+# Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
# 1999), xterm has supported shift/control/alt/meta modifiers which produce
# additional function-key strings. Some other developers copied the feature,
-# though they did not follow xterm's lead in patch #167 (in 2002), to make
+# though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
# these key definitions less ambiguous.
#
# A few terminals provide similar functionality (sending distinct keys when
# Ss is a string capability with one numeric parameter. It is used to set the
# cursor style as described by the DECSCUSR function to a block or
# underline.
+# TS is a string capability which acts like "tsl", but uses no parameter and
+# goes to the first column of the "status line".
# XM is a string capability which overrides ncurses's built-in string which
-# enables xterm mouse mode.
-#
-# Miscellaneous extensions:
+# enables/disables xterm mouse mode.
+# xm shows the format of the mouse responses. Parameters:
+# p1 = y-ordinate
+# p2 = x-ordinate
+# p3 = button
+# p4 = state, e.g., pressed or released
+# p5 = y-ordinate starting region
+# p6 = x-ordinate starting region
+# p7 = y-ordinate ending region
+# p8 = x-ordinate ending region
+# Other extensions, used in xm:
+# %u = UTF-8
+#
+#### Miscellaneous extensions:
#
# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
# This was implemented for the Hurd.
+# rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an
+# experimental feature of tmux.
+# CO gives the number of indexed ("ANSI") colors which overlay an RGB color
+# space.
# E3 clears the terminal's scrollback buffer. This was implemented in the
-# Linux 3.0 kernel as a security feature.
+# Linux 3.0 kernel as a security feature. It matches a feature which was
+# added in xterm patch #107.
# U8 is a numeric capability which denotes a terminal emulator which does not
# support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero
# value to enable it.
+# Smulx modifies the appearance of underlines in VTE, December 2017.
#
######## CHANGE HISTORY
#
# 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
# * Merged in DEC's official entries for its terminals. The only old
# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
-# * Replaced the translated BBN Bitgraph entries with purpose-built
+# * Replaced the translated BBN BitGraph entries with purpose-built
# ones from AT&T's SVr3.
# * Replaced the AT&T entries with AT&T's official terminfos.
# * Added teleray 16, vc415, cops10.
# * Corrected hpa/vpa in linux entry. They still fail the worm test.
# * We can handle the HP meml/memu capability now.
# * Added smacs to klone entries, just as documentation.
-# * Carrected ansi.sys and cit-500 entries.
+# * Corrected ansi.sys and cit-500 entries.
# * Added z39, vt320-k311, v220c, and avatar entries.
# * Make pcansi use the ansi.sys invis capability.
# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
# 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
# * Another sweep through the Shuford archive looking for new info.
# * Added dg100 alias to dg6053 based on a comp.terminals posting.
-# * Added st52 from Per Persson.
+# * Added st52 from Per Persson.
# * Added eterm from the GNU Emacs 19.30 distribution.
# * Freeze for 1.9.9.
# 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
# * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
#
# 1998/10/10
-# * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
+# * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
# * correct initialization string in xterm-r5, add misc other features
-# to correspond with xterm patch 84 - TD
+# to correspond with xterm patch #84 - TD
#
# 1998/12/19
-# * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
+# * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
# * add Mathew Vernon's mach console entries
# * corrections for ncsa function-keys (report by Larry Virden)
#
# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
# xterm and ncsa entries by removing the unneeded ones. Note that
# some entries will return kend & khome versus kslt and kfnd, for
-# PC-style keyboards versus strict vt220 compatiblity - TD
+# PC-style keyboards versus strict vt220 compatibility - TD
#
# 1999/3/13
# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
# (Jeffrey C Honig)
#
# 1999/3/27
-# * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
+# * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
#
# 1999/4/10
# * add linux-lat, from RedHat patches to ncurses 4.2
# * add entries for mterm (mterm, mterm-ansi, decansi) -TD
# * ncr260wy350pp has only 16 color pairs -TD
# * add sun-type4 from NetBSD -TD
-# * update xterm-xfree86 to current (patch 170) -TD
+# * update xterm-xfree86 to current (xterm patch #170) -TD
# * add screen-bce, screen-s entries -TD
# * add xterm-1002, xterm-1003 entries -TD
#
# * similar fixups for cvvis/cnorm various entries -TD
#
# 2004-05-22
-# * remove 'ncv' from xterm-256color (patch 188) -TD
+# * remove 'ncv' from xterm-256color (xterm patch #188) -TD
#
# 2004-06-26
# * add mlterm -TD
#
# 2007-11-11
# * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
-# xterm starting with patch #216 -TD
+# xterm starting with xterm patch #216 -TD
# * make legacy xterm entries such as xterm-24 inherit from xterm-old,
# to match xterm #230 -TD
# * extend xterm+pccX entries to match xterm #230 -TD
# 2009-12-12
# * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
#
-# 2009-12-12
+# 2009-12-19
# * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
-# * rename minix to minix-1.7, add minix entry for Minux3 -TD
+# * rename minix to minix-1.7, add minix entry for Minix3 -TD
#
# 2009-12-26
# * add bterm (bogl 0.1.18) -TD
# FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
#
# 2010-06-12
-# * add mlterm+256color entry -TD
+# * add mlterm-256color entry -TD
#
# 2010-07-17
# * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
# * rewrite vt520 entry based on vt420 -TD
# * corrected 'op' for bterm (report by Samuel Thibault) -TD
#
+# 2012-06-02
+# * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
+# analysis by Martin Husemann).
+# * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
+# Onno van der Linden).
+# * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
+# * add kdch1, etc., to qvt108 -TD
+# * add dl1/il1 to some entries based on dl/il values -TD
+# * add dl to simpleterm -TD
+#
+# 2012-06-10
+# * modify some older xterm entries to align with xterm source -TD
+# * separate "xterm-old" alias from "xterm-r6" -TD
+#
+# 2012-07-28
+# * add E3 to xterm-basic and putty -TD
+#
+# 2012-08-11
+# * add nsterm-256color, make this the default nsterm -TD
+# * remove bw from nsterm-bce, per testing with tack -TD
+#
+# 2012-10-12
+# * add vte-2012, gnome-2012, making these the defaults for vte/gnome
+# (patch by Christian Persch).
+#
+# 2012-11-02
+# * reviewed vte-2012, reverted most of the change since it was incorrect
+# based on testing with tack -TD
+# * un-cancel the initc in vte-256color, since this was implemented
+# starting with version 0.20 in 2009 -TD
+#
+# 2013-03-16
+# * correct typo in sgr string for sun-color,
+# add bold for consistency with sgr,
+# change smso for consistency with sgr -TD
+# * correct typo in sgr string for terminator -TD
+# * add blink to the attributes masked by ncv in linux-16color (report
+# by Benjamin Sittler)
+#
+# 2013-03-23
+# * change initialization for vt220, similar entries for consistency
+# with cursor-key strings (NetBSD #47674) -TD
+# * further improvements to linux-16color (Benjamin Sittler)
+#
+# 2013-05-11
+# * move nsterm-related entries out of "obsolete" section to more
+# plausible "ansi consoles" -TD
+# * additional cleanup of table-of-contents by reordering -TD
+#
+# 2013-06-07
+# * added note to clarify Terminal.app's non-emulation of the various
+# terminal types listed in the preferences dialog -TD
+#
+# 2013-11-02
+# * use TS extension to describe xterm's title-escapes -TD
+# * modify terminator and nsterm-s to use xterm+sl-twm building block -TD
+# * update hurd.ti, add xenl to reflect 2011-03-06 change in
+# http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
+# (Debian #727119).
+# * simplify pfkey expression in ansi.sys -TD
+#
+# 2013-11-10
+# * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
+#
+# 2014-02-22
+# * updated notes for wsvt25 based on tack and vttest -TD
+# * add teken entry to show actual properties of FreeBSD's "xterm"
+# console -TD
+#
+# 2014-03-22
+# * add terminology entry -TD
+# * add mlterm3 entry, use that as "mlterm" -TD
+# * inherit mlterm-256color from mlterm -TD
+#
+# 2014-03-23
+# * fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
+#
+# 2014-03-30
+# * cancel ccc in putty-256color and konsole-256color for consistency
+# with the cancelled initc capability (patch by Sven Zuhlsdorf).
+# * add xterm+256setaf building block for various terminals which only
+# get the 256-color feature half-implemented -TD
+# * updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
+# 0.4.1 -TD
+#
+# 2014-05-03
+# * add vt520ansi (Mike Gran)
+#
+# 2014-05-24
+# * correct several entries which had termcap-style padding used in
+# terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
+# * correct syntax for padding in some entries: dg211, h19 -TD
+# * correct ti924-8 which had confused padding versus octal escapes -TD
+# * correct padding in sbi entry -TD
+#
+# 2014-06-07
+# * update xterm-new to xterm patch #305 -TD
+# + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
+# (italic). This was a long-ago typo in screen 3.1.1 which was
+# overlooked until a few terminal emulators implemented the feature -TD
+#
+# 2014-06-09
+# > fix regression in screen terminfo entries (reports by Christian
+# Ebert, Gabriele Balducci) -TD
+# + revert the change to screen; see notes for why this did not work -TD
+# + cancel sitm/ritm for entries which extend "screen", to work around
+# screen's hardcoded behavior for SGR 3 -TD
+#
+# 2014-06-14
+# + modify sgr for screen.xterm-new to support dim capability -TD
+# + add dim capability to nsterm+7 -TD
+# + cancel dim capability for iterm -TD
+# + add dim, invis capabilities to vte-2012 -TD
+# + add sitm/ritm to konsole-base and mlterm3 -TD
+#
+# 2014-10-06
+# + add xterm-1005 and xterm-1006 entries, with suggested extension
+# capability "xm" -TD
+#
+# 2014-10-07
+# + update test-report for mrxvt -TD
+#
+# 2014-10-11
+# + add xterm-x10mouse, xterm-x11mouse, etc. -TD
+#
+# 2014-10-18
+# + reviewed terminology 0.6.1, add function key definitions. None of
+# the vt100-compatibility issues were improved -TD
+#
+# 2015-04-22
+# + add 'dim' capability to screen entry (report by Leonardo B Schenkel)
+# + add several key definitions to nsterm-bce to match preconfigured
+# keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
+#
+# 2015-05-02
+# + remove unnecessary ';' from E3 capabilities -TD
+# + add tmux entry, derived from screen (patch by Nicholas Marriott).
+# + split-out recent change to nsterm-bce as nsterm-build326, and add
+# nsterm-build342 to reflect changes with successive releases of OSX
+# (discussion with Leonardo B Schenkel)
+# + add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
+# Debian #783806)
+#
+# 2015-05-17
+# + remove screen-bce.mlterm, since mlterm does not do "bce" -TD
+# + add several screen.XXX entries to support the respective variations
+# for 256 colors -TD
+#
+# 2015-05-23
+# + add putty+fnkeys* building-block entries -TD
+#
+# 2015-05-30
+# + remove spurious "%;" from st entry (report by Daniel Pitts) -TD
+# + add vte-2014, update vte to use that -TD
+#
+# 2015-06-27
+# + comment-out "screen.xterm" entry, and inherit screen.xterm-256color
+# from xterm-new (report by Richard Birkett) -TD
+#
+# 2015-07-25
+# + add status line to tmux via xterm+sl (patch by Nicholas Marriott).
+# + fixes for st 0.5 from testing with tack -TD
+#
+# 2015-10-24
+# + updated minitel entries to fix kel problem with emacs, and add
+# minitel1b-nb (Alexandre Montaron).
+# + reviewed/updated nsterm entry Terminal.app in OSX -TD
+# + replace some dead URLs in commands with equivalents from the
+# Internet Archive -TD
+#
+# 2015-11-14
+# + add bold to pccon+sgr+acs and pccon-base (Tati Chevron).
+# + add keys f12-f124 to pccon+keys (Tati Chevron).
+#
+# 2015-11-21
+# + fix some inconsistencies in the pccon* entries -TD
+#
+# 2015-11-28
+# + add viewdata (Alexandre Montaron).
+#
+# 2016-01-16
+# + tidy up comments about hardcoded 256color palette (report by
+# Leonardo Brondani Schenkel) -TD
+# + add putty-noapp entry, and amend putty entry to use application mode
+# for better consistency with xterm (report by Leonardo Brondani
+# Schenkel) -TD
+#
+# 2016-04-23
+# + add 'oc' capability to xterm+256color, allowing palette reset for
+# xterm -TD
+#
+# 2016-05-14
+# + modify linux2.6 entry to improve line-drawing -TD
+# + make linux3.0 entry the default linux entry (Debian #823658) -TD
+#
+# 2016-05-29
+# + modify rs1 for xterm-16color, xterm-88color and xterm-256color to
+# reset palette using "oc" string as in linux -TD
+#
+# 2016-06-11
+# + use ANSI reply for u8 in xterm-new, to reflect vt220-style responses
+# that could be returned -TD
+# + added a few capabilities fixed in recent vte -TD
+#
+# 2016-08-17
+# + correct a typo in interix -TD
+#
+# 2016-09-24
+# + updated minitel entries to use status line with screen(1), as well as
+# printing special G2 videotex chars like french accentuated glyph
+# using special cap XC= (patch by Alexandre Montaron).
+#
+# 2016-10-01
+# + add linux-m1 minitel entries (patch by Alexandre Montaron).
+# + correct rs2 string for vt100-nam -TD
+#
+# 2016-11-26
+# + modify linux-16color to not mask dim, standout or reverse with the
+# ncv capability -TD
+# + add 0.1sec mandatory delay to flash capabilities using the VT100
+# reverse-video control -TD
+# + omit selection of ISO-8859-1 for G0 in enacs capability from linux2.6
+# entry, to avoid conflict with the user-defined mapping. The reset
+# feature will use ISO-8859-1 in any case (Mikulas Patocka).
+#
+# 2016-12-30
+# + merge current st description (report by Harry Gindi) -TD
+#
+# 2016-12-31
+# + modify flash capability for linux and wyse entries to put the delay
+# between the reverse/normal escapes rather than after -TD
+#
+# 2017-01-28
+# + minor comment-fixes to help automate links to bug-urls -TD
+# + add dvtm, dvtm-256color -TD
+# + add settings corresponding to xterm-keys option to tmux entry to
+# reflect upcoming change to make that option "on" by default
+# (patch by Nicholas Marriott).
+# + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
+# + add dumb-emacs-ansi -TD
+#
+# 2017-03-05
+# + correct a few spelling errors in comments -TD
+# + add fbterm -TD
+#
+# 2017-03-11
+# + add vt100+4bsd building block, use that for older terminals rather
+# than "vt100" which is now mostly used as a building block for
+# terminal emulators -TD
+# + modify vt100 rs2 string to reset vt52 mode and scrolling regions
+# (report/analysis by Robert King) -TD
+#
+# 2017-04-01
+# + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD
+# + add smso for env230, to match sgr -TD
+# + remove p7/protect from sgr in fbterm -TD
+# + drop setf/setb from fbterm; setaf/setab are enough -TD
+# + make xterm-pcolor sgr consistent with other capabilities -TD
+# + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic
+# (discussion with Nicholas Marriott)
+#
+# 2017-04-22
+# + correct missing comma-separator between string capabilities in
+# icl6402 and m2-nam -TD
+# + update formatting with ncurses 6.0.20170422 -TD
+# + restore rmir/smir in ansi+idc to better match original ansiterm+idc,
+# add alias ansiterm (report by Robert King).
+#
+# 2017-05-13
+# + reformatted using hexadecimal numbers to improve readability -TD
+#
+# 2017-07-29
+# + update interix entry using tack and SFU on Windows 7 Ultimate -TD
+# + use ^? for kdch1 in interix (reported by Jonathan de Boyne Pollard)
+# + add "rep" to xterm-new, available since 1997/01/26 -TD
+# + move SGR 24 and 27 from vte-2014 to vte-2012 (request by Alain
+# Williams) -TD
+#
+# 2017-08-16
+# + update "iterm" entry -TD
+# + add "iterm2" entry (report by Leonardo Brondani Schenkel) -TD
+#
+# 2017-08-18
+# + update notes on user-defined capabilities -TD
+#
+# 2017-08-26
+# + fixes for "iterm2" (report by Leonardo Brondani Schenkel) -TD
+#
+# 2017-11-11
+# + add "op" to xterm+256setaf -TD
+# + reviewed terminology 1.0.0 -TD
+# + reviewed st 0.7 -TD
+#
+# 2017-11-18
+# + modify old terminology entry and a few other terminal emulators to
+# account for xon -TD
+# + correct sgr string for tmux, which used screen's "standout" code
+# rather than the standard code (patch by Roman Kagan)
+# + correct sgr/sgr0 strings in a few other cases reported by tic, making
+# those correspond to the non-sgr settings where they differ, but
+# otherwise use ECMA-48 consistently:
+# jaixterm, aixterm, att5420_2, att4424, att500, decansi, d410-7b,
+# dm80, hpterm, emu-220, hp2, iTerm2.app, mterm-ansi, ncrvt100an,
+# st-0.7, vi603, vwmterm -TD
+#
+# 2017-12-30
+# + add xterm+noalt, xterm+titlestack, xterm+alt1049, xterm+alt+title
+# blocks from xterm #331 -TD
+# + add xterm+direct, xterm+indirect, xterm-direct entries from xterm
+# #331 -TD
+# + modify xterm+256color and xterm+256setaf to use correct number of
+# color pairs, for ncurses 6.1 -TD
+# + add rs1 capability to xterm-256color -TD
+# + modify xterm-r5, xterm-r6 and xterm-xf86-v32 to use xterm+kbs to
+# match xterm #272, reflecting packager's changes -TD
+# + remove "boolean" Se, Ss from st-0.7 -TD
+#
+# 2018-01-04
+# + add konsole-direct and st-direct -TD
+# + remove unsupported "Tc" capability from st-0.7; use st-direct if
+# direct-colors are wanted -TD
+#
+# 2018-01-17
+# + add vte-direct -TD
+# + add XT, hpa, indn, and vpa to screen, and invis, E3 to tmux (patch by
+# Pierre Carru)
+#
+# 2018-01-21
+# + use xterm+sm+1006 in xterm-new, vte-2014 -TD
+# + use xterm+x11mouse in iterm, iterm2, mlterm3 because xterm's 1006
+# mode does not work with those programs. konsole is debatable -TD
+# + add "termite" entry (report by Markus Pfeiffer) -TD
+#
+# 2018-01-27
+# + trim "XT" from screen entry -TD
+# + modify iterm to use xterm+sl-twm building block -TD
+# + mark konsole-420pc, konsole-vt100, konsole-xf3x obsolete reflecting
+# konsole's removal in 2008 -TD
+# + expanded the history section of konsole to explain its flawed
+# imitation of xterm's keyboard -TD
+# + use xterm+x11mouse in screen.* entries because screen does not yet
+# support xterm's 1006 mode -TD
+# + add nsterm-build400 for macOS 10.13 -TD
+# + add ansi+idc1, use that in ansi+idc adding dch for consistency -TD
+# + update vte to vte-2017 -TD
+# + add ecma+strikeout to vte-2017 -TD
+# + add iterm2-direct -TD
+# + updated teraterm, added teraterm-256color -TD
+# + add mlterm-direct -TD
+# + add descriptions for ANSI building-blocks -TD
+#
+# 2018-02-24
+# + correct Ss/Ms interchange in st-0.7 entry (tmux #1264) -TD
+# + fix remaining flash capabilities with trailing mandatory delays -TD
+#
+# 2018-03-17
+# + trim some redundant capabilities from st-0.7 -TD
+# + trim unnecessary setf/setb from interix -TD
+#
+# 2018-05-19
+# + trim spurious whitespace from tmux in 2018-02-24 changes;
+# fix some inconsistencies in/between tmux- and iterm2-entries for SGR
+# (report by C Anthony Risinger)
+# + improve iterm2 using some xterm features which it has adapted -TD
+#
+# 2018-06-30
+# + add acsc string to vi200 (Nibby Nebbulous)
+# add right/down-arrow to vi200's acsc -TD
+#
+# 2018-07-21
+# + corrected acsc for wy50 -TD
+# + add wy50 and wy60 shifted function-keys as kF1 to kF16 -TD
+# + remove ansi+rep mis-added to interix in 2018-02-23 -TD
+#
+# 2018-07-28
+# + fix typo in tvi955 -TD
+# + corrected acsc for regent60 -TD
+# + add alias n7900 -TD
+#
+# 2018-09-29
+# + corrected acsc for tvi950 -TD
+# + remove bogus kf0 from tvi950 -TD
+# + added function-key definitions to agree with Televideo 950 manual -TD
+# + add bel to tvi950 -TD
+# + add shifted function-keys to regent60 -TD
+# + renumber regent40 function-keys to match manual -TD
+# + add cd (clr_eos) to adds200 -TD
+#
+# 2018-10-27
+# + add OpenGL clients alacritty and kitty -TD
+# + add Smulx for tmux, vte-2018 -Nicholas Marriott
+#
+# 2018-12-15
+# + fix a typo in comments (Aaron Gyes).
+# + add nsterm-build309 to replace nsterm-256color, assigning the latter
+# as an alias of nsterm, to make mouse work with nsterm-256color -TD
+# + base gnome-256color entry on "gnome", not "vte", for consistency -TD
+#
+# 2019-01-12
+# + add nsterm-direct -TD
+# + use SGR 1006 mouse for konsole-base -TD
+# + use SGR 1006 mouse for putty -TD
+# + add ti703/ti707, ti703-w/ti707-w (Robert Clausecker)
+#
+# 2019-02-23
+# + fix typo in adds200 -TD
+#
+# 2019-03-30
+# + add "screen5", to mention italics (report by Stefan Assmann)
+# + modify description of xterm+x11hilite to eliminate unused p5 -TD
+#
+# 2019-05-18
+# + update xterm-new to xterm patch #345 -TD
+# + add/use xterm+keypad in xterm-new (report by Alain D D Williams) -TD
+# + update terminator entry -TD
+# + remove hard-tabs from ti703 (report by Robert Clausecker)
+# + add Smol/Rmol for tmux, vte-2018 -Nicholas Marriott
+#
+# 2019-06-01
+# + add rs1 to konsole, mlterm -TD
+#
+# 2019-06-08
+# + add mintty, mintty-direct (Thomas Wolff)
+# 2019-06-09
+# + comment-out some user-defined capabilities in mintty+common to allow
+# builds with existing releases 5.9-6.1 -TD
+#
+# 2019-06-30
+# + add ms-terminal -TD
+# + add vscode, vscode-direct -TD
+# + use ecma+index in screen, st -TD
+#
+# 2019-07-06
+# + add domterm -TD
+# + improve comments for recent changes, add alias xterm.js -TD
+#
+# 2019-08-03
+# + amend the change to screen, because tmux relies upon that entry
+# and does not support that feature (Debian #933572) -TD
+# + updated ms-terminal entry & notes -TD
+# + updated kitty entry & notes -TD
+# + updated alacritty+common entry & notes -TD
+# + use xterm+sl-twm for consistency -TD
+#
+# 2019-09-22
+# + correct a comment -TD
+#
+# 2019-10-26
+# + modify linux-16color to accommodate Linux console driver change in
+# early 2018 (report by Dino Petrucci).
+#
+# 2019-11-02
+# + add "xterm-mono" to help packagers (report by Sven Joachim) -TD
+#
+# 2019-11-09
+# + drop ich1 from rxvt-basic, Eterm and mlterm to improve compatibility
+# with old non-curses programs -TD
+# + reviewed st 0.8.2, updated some details -TD
+# + use ansi+rep several places -TD
+#
+# 2020-01-12
+# + update alacritty entries for 0.4.0 (prompted by patch by
+# Christian Duerr) -TD
+#
+# 2020-01-18
+# + spelling fixes per codespell -TD
+# + improve xm example for xterm+x11mouse, xterm+sm+1006 -TD
+#
+# 2020-02-22
+# + improve vt50h and vt52 based on DECScope manual -TD
+# + add/use vt52+keypad and vt52-basic -TD
+#
+# 2020-04-18
+# + use vt52+keypad in xterm-vt52, from xterm #354 -TD
+#
+# 2020-04-25
+# + use vt100+fnkeys in putty -TD
+#
+# 2020-05-02
+# + add details on the change to Linux SGR 21 in 2018 -TD
+# + add xterm-direct16 and xterm-direct256 -TD
+#
+# 2020-05-03
+# + fix some dead URLs -TD
+#
+# 2020-05-16
+# + update notes on vscode / xterm.js -TD
+#
+# 2020-05-30
+# + re-enable "bel" in konsole-base (report by Nia Huang)
+# + add linux-s entry (patch by Alexandre Montaron).
+#
+# 2020-06-06
+# + add xterm+256color2, xterm+88color2, to deprecate nonstandard usage
+# in xterm+256color, xterm+88color -TD
+# + add shifted Linux console keys in linux+sfkeys entry for
+# screen.linux (report by Alexandre Montaron).
+# + use vt100+enq in screen (report by Alexandre Montaron).
+# + add screen.linux-s alias (suggested by Alexandre Montaron).
+#
+# 2020-07-11
+# + fix pound-sign mapping in acsc of linux2.6 entry (report by Ingo
+# Bruckl).
+#
+# 2020-08-28
+# + correct icl6404 csr (report by Florian Weimer).
+# + correct ti916 cup (report by Florian Weimer).
+# + improve ndr9500 (report by Florian Weimer).
+#
+# 2020-09-05
+# + correct description of vt330/vt340 (Ross Combs).
+#
+# 2020-09-19
+# + update mlterm3 for 3.9.0 (report by Premysl Eric Janouch).
+#
+# 2020-09-29
+# + add tmux-direct (tmux #2370)
+# + simplify mlterm initialization with DECSTR -TD
+# + change tmux's kbs to ^? (report by Premysl Eric Janouch)
+#
+# 2020-10-10
+# + correct sgr in aaa+rv (report by Florian Weimer) -TD
+# + fix some sgr inconsistencies in d230c, ibm6153, ibm6154,
+# ncrvt100an -TD
+#
+# 2020-10-17
+# + expanded notes about tek4107 -TD
+#
+# 2020-11-07
+# + update kitty+common -TD
+# + add putty+screen and putty-screen (suggested by Alexandre Montaron).
+#
+# 2020-11-28
+# + add Smulx to alacritty (Christian Duerr).
+# + add rep to PuTTY -TD
+# + add putty+keypad -TD
+#
+# 2020-12-05
+# + correct mlterm3 kf1-kf4 (Debian #975322) -TD
+# + add flash to mlterm3 -TD
+#
+# 2020-12-27
+# + update terminology to 1.8.1 -TD
+#
+# 2021-01-16
+# + add comment for linux2.6 regarding CONFIG_CONSOLE_TRANSLATIONS
+# (report by Patrick McDermott) -TD
+#
+# 2021-01-25
+# + split-out att610+cvis, vt220+cvis, vt220+cvis8 -TD
+# + add vt220-base, for terminal emulators which generally have not
+# supported att610's blinking cursor control -TD
+# + use vt220+cvis in vt220, etc -TD
+# + use att610+cvis, xterm+tmux and ansi+enq in kitty -TD
+# + use vt220+cvis in st, terminology, termite since they ignore
+# blinking-cursor detail in att610+cvis -TD
+#
######## SHANTIH! SHANTIH! SHANTIH!
projects / ncurses.git / blobdiff