+# Can't set tabs! Other bugs (ANSI mode only):
+# - can't redefine function keys (anyway, key redefinition in ANSI mode
+# is too much complex to be described);
+# - meta key can't be described (the terminal forgets it when reset);
+# The xon-xoff handshaking can't be disabled while in ansi personality, so
+# emacs can't work at speed greater than 9600 baud. No padding is needed at
+# this speed.
+# dch1 has been commented out because it causes annoying glittering when
+# vi deletes one character at the beginning of a line with tabs in it.
+# dch makes sysgen(1M) have a horrible behaviour when deleting
+# a screen and makes screen(1) behave badly, so it is disabled too. The nice
+# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
+# not, so smir and rmir are commented out as well.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
+ am, km, mc5i, mir, msgr, xenl,
+ cols#80, it#8, lines#25, vt#3,
+ acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
+ cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
+ cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
+ cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
+ ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
+ enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
+ hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
+ il1=\E[L, ind=\n$<1>, invis=\E[8m,
+ is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4
+ ;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
+ kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+ kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
+ kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
+ kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
+ kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
+ kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
+ mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
+ rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
+ rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
+ rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16
+ ;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E
+ \E[4i,
+ sc=\E7,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?
+ %p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
+
+# This is the american terminal. Here tabs work fine.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
+ hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
+
+# This terminal (firmware version 02) has a lot of bugs:
+# - can't set tabs;
+# - other bugs in ANSI modes (see above).
+# This description disables handshaking when using cup. This is because
+# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
+# cannot be used at speeds greater than 9600 baud, because at greater
+# speeds handshaking is needed even for character sending. If you use
+# DTR handshaking, you can use even greater speeds.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
+ am, bw, hs, km, mc5i, mir, msgr, xon,
+ cols#80, it#8, lines#25, wsl#46,
+ acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
+ blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
+ cnorm=\E`4\E`1, cr=\r, cub1=^H, cud1=\Ej, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
+ cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
+ ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
+ flash=\E\^1$<30/>\E\^0, fsl=\r, home=^^, ht=^I, il1=\EE,
+ ind=\n, invis=\EG3,
+ is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E
+ \^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er
+ \Ee"\EcD\024,
+ ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
+ kcud1=\n, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
+ kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
+ kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
+ kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
+ kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
+ kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
+ nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
+ rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
+ rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`
+ 9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/
+ \Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
+ sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t
+ %{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?
+ %p9%t\EcE%e\EcD%;,
+ sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
+ smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
+
+# This is the american terminal. Here tabs work.
+# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
+wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
+ hts=\E1, tbc=\E0, use=wy99f,
+
+#
+# The Wyse 160 is combination of the WY-60 and the WY-99gt.
+# The reset strings are slow and the pad times very depending
+# on other parameters such as font loading. I have tried
+# to follow the following outline:
+#
+# <rs1> -> set personality
+# <rs2> -> set number of columns
+# <rs3> -> set number of lines
+# <is1> -> select the proper font
+# <is2> -> do the initialization
+# <is3> -> set up display memory (2 pages)
+#
+# The display memory may be used for either text or graphics.
+# When "Display Memory = Shared" the terminal will have more pages
+# but garbage may be left on the screen when you switch from
+# graphics to text. If "Display Memory = Unshared" then the
+# text area will be only one page long.
+#
+# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
+# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
+wy160|wyse160|Wyse 160,
+ am, bw, hs, km, mc5i, mir, msgr,
+ cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
+ acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+ bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
+ cnorm=\E`1, cr=\r, cub1=^H, cud1=\n, cuf1=^L,
+ cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
+ dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
+ el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=\r, home=\E{, ht=^I,
+ hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
+ is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016
+ \024\El,
+ is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
+ kcud1=\n, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
+ kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
+ kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
+ kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
+ kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
+ kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
+ mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
+ pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
+ pfx=\EZ1%p1%{63}%+%c%p2%s\177,
+ pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
+ rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
+ rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
+ rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
+ sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}
+ %|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t
+ %{64}%|%;%?%p7%t%{1}%|%;%c,
+ sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
+ smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
+ tbc=\E0, tsl=\EF, use=adm+sgr,
+#
+wy160-w|wyse160-w|wyse 160 132-column,
+ cols#132, lw#7, nlab#16, wsl#90,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
+ rs2=\EeF$<150>\E`;$<150>, use=wy160,
+#
+wy160-25|wyse160-25|wyse 160 80-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<200>, use=wy160,
+wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
+ lh@, lines#25, lw@, nlab@,
+ pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
+#
+wy160-42|wyse160-42|wyse 160 80-column 42-lines,
+ lines#42,
+ clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
+ ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
+ rs3=\Ee*$<150>, use=wy160,
+wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
+ cols#132, lw#7, nlab#16, wsl#90,
+ cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
+ rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
+#
+wy160-43|wyse160-43|wyse 160 80-column 43-lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\Ee+$<150>, use=wy160-42,
+wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
+ lh@, lines#43, lw@, nlab@,
+ pln@, rs3=\Ee+$<150>, use=wy160-42-w,
+#
+wy160-vb|wyse160-vb|Wyse 160 visible bell,
+ bel@, use=wy160,
+wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
+ bel@, use=wy160-w,
+#
+# The Wyse 75 is a vt100 lookalike without advanced video.
+#
+# The Wyse 75 can support one attribute (e.g. Dim, Inverse,
+# Underline) without magic cookies. The following description
+# uses this capability, but when more than one attribute is
+# put on the screen at once, all attributes will be changed
+# to be the same as the last attribute given.
+# The Wyse 75 can support more attributes when used with magic
+# cookies. The wy75-mc terminal description uses magic cookies
+# to correctly handle multiple attributes on a screen.
+#
+wy75|wyse75|wyse 75,
+ am, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, lines#24, ma#1, pb#1201, wsl#78,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
+ cnorm=\E[?25h, cr=\r, csr=\E[%i%p1%d;%p2%dr$<2>,
+ cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\n,
+ cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+ cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
+ dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
+ dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
+ ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
+ enacs=\E)0, flash=\E[30h\E\,$<250/>\E[30l, fsl=^A,
+ home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
+ ind=\n$<2>, ip=$<1>,
+ is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
+ is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
+ kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
+ kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
+ kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
+ kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+ khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
+ kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
+ mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
+ rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
+ rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
+ sc=\E7,
+ sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t
+ \E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t
+ \016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
+ tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
+#
+# This terminal description uses the non-hidden attribute mode
+# (with magic cookie).
+#
+wy75-mc|wyse75-mc|wyse 75 with magic cookies,
+ msgr@,
+ ma@, xmc#1,
+ blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
+ rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
+ sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?
+ %p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9
+ %t\016%e\017%;,
+ sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
+ use=wy75,
+wy75-vb|wyse75-vb|wyse 75 with visible bell,
+ pb@,
+ bel@, use=wy75,
+wy75-w|wyse75-w|wyse 75 in 132 column mode,
+ cols#132, wsl#130,
+ rs2=\E[35h\E[?3h$<80>, use=wy75,
+wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
+ pb@,
+ bel@, use=wy75-w,
+#
+# Wyse 85 emulating a vt220 7 bit mode.
+# 24 line screen with status line.
+#
+# The vt220 mode permits more function keys but it wipes out
+# the escape key. I strongly recommend that <f11> be set to
+# escape (esc).
+# The terminal may have to be set for 8 data bits and 2 stop
+# bits for the arrow keys to work.
+# The Wyse 85 runs faster with XON/XOFF enabled. Also the
+# <dch> and <ich> work best when XON/XOFF is set. <ich> and
+# <dch> leave trash on the screen when used without XON/XOFF.
+#
+wy85|wyse85|wyse 85,
+ am, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
+ dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
+ ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
+ enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
+ fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
+ ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
+ ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
+ is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+ kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
+ kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+ kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
+ kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~,
+ kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
+ khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+ kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
+ mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
+ rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
+ rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
+ rs3=\E[?5l, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
+ %p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
+#
+# Wyse 85 with visual bell.
+wy85-vb|wyse85-vb|wyse 85 with visible bell,
+ bel@, flash=\E[30h\E\,$<300/>\E[30l, use=wy85,
+#
+# Wyse 85 in 132-column mode.
+wy85-w|wyse85-w|wyse 85 in 132-column mode,
+ cols#132, wsl#132,
+ rs2=\E[35h$<70/>\E[?3h, use=wy85,
+#
+# Wyse 85 in 132-column mode with visual bell.
+wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
+ bel@, use=wy85-w,
+
+# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
+# This copes with an apparent firmware bug in the wy85. He writes:
+# "What I did was change leave the terminal cursor keys set to Normal
+# (instead of application), and change \E[ to \233 for all the keys in
+# terminfo. At one point, I found some reference indicating that this
+# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
+# me), but I can't find that and the server under my bookmark to "Wyse
+# Technical" isn't responding. So there's the question of whether the wy85
+# terminfo should reflect the manufacturer's intended behaviour of the terminal
+# or the actual."
+wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
+ am, hs, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
+ dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
+ dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
+ ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
+ enacs=\E)0, flash=\E[30h\E\,$<300/>\E[30l,
+ fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
+ ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
+ ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
+ is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
+ is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
+ kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
+ kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
+ kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
+ kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
+ kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
+ kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
+ kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
+ khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
+ kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
+ mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
+ rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
+ rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
+ rs3=\E[?5l, sc=\E7,
+ sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?
+ %p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
+ smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ tsl=\E[40h\E7\E[25;%i%p1%dH,
+#
+# Wyse 185 emulating a vt320 7 bit mode.
+#
+# This terminal always displays 25 lines. These lines may be used
+# as 24 data lines and a terminal status line (top or bottom) or
+# 25 data lines. The 48 and 50 line modes change the page size
+# and not the number of lines on the screen.
+#
+# The Compose Character key can be used as a meta key if changed
+# by set-up.
+#
+wy185|wyse185|wyse 185,
+ am, hs, km, mc5i, mir, msgr, xenl, xon,
+ cols#80, it#8, lines#24, wsl#80,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+ clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=\r,
+ csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=\n, cuf=\E[%p1%dC, cuf1=\E[C,