-att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
- am, eo, mir, msgr, xon,
- cols#80, it#8, lines#24,
- bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
- kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
- kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
- kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
- kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
- kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
- rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
- smso=\E[7m,
-att2350|AT&T 2350 Video Information Terminal 80 column mode,
- mc0@, mc4@, mc5@, use=att2300,
-
-# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
-# Seems upward compatible with vt100, plus ins/del line/char.
-# On sgr, the protection parameter is ignored.
-# No check is made to make sure that only 3 parameters are output.
-# standout= reverse + half-intensity = 3 | 5.
-# bold= reverse + underline = 2 | 3.
-# note that half-bright blinking doesn't look different from normal blinking.
-# NOTE:you must program the function keys first, label second!
-# (att4410: a BSD entry has been seen with the following capabilities:
-# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
-# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
-att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
- am, hs, mir, msgr, xon,
- cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
- acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
- dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
- ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
- is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
- kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
- kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
- ll=\E[24H, nel=^M^J,
- pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
- pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
- rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
- sc=\E7,
- sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
- tsl=\E7\E[25;%p1%{1}%+%dH,
-
-att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
- cols#132, wsl#132,
- is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
-
-att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
- OTbs,
- pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
- use=att5410v1,
-
-att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
- cols#132, wsl#132,
- is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
-
-# 5410 in terms of a vt100
-# (v5410: added <rmam>/<smam> based on init string -- esr)
-v5410|att5410 in terms of a vt100,
- am, mir, msgr, xon,
- cols#80, it#8, lines#24, vt#3,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
- clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub1=^H, cud1=^J, cuf1=\E[C$<2>,
- cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
- dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
- enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
- il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
- kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
- rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
- rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
- sc=\E7,
- sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
- sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
- smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
- use=vt100+fnkeys,
-
-#
-# Teletype Model 5420 -- A souped up 5410, with multiple windows,
-# even! the 5420 has three modes: scroll, window or page mode
-# this terminfo should work in scroll or window mode, but doesn't
-# take advantage of any of the differences between them.
-#
-# Has memory below (2 lines!)
-# 3 pages of memory (plus some spare)
-# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
-# <hpa>, <hts> would work for these, but these work in both scroll and window
-# mode... Unset insert character so insert mode works
-# <is1> sets 80 column mode,
-# <is2> escape sequence:
-# 1) turn off all fonts
-# 2) function keys off, keyboard lock off, control display off,
-# insert mode off, erasure mode off,
-# 3) full duplex, monitor mode off, send graphics off, nl on lf off
-# 4) reset origin mode
-# 5) set line wraparound
-# 6) exit erasure mode, positional attribute mode, and erasure extent mode
-# 7) clear margins
-# 8) program ENTER to transmit ^J,
-# We use \212 to program the ^J because a bare ^J will get translated by
-# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
-# 1 2 3 4 5 6 7 8
-# <is3> set screen color to black,
-# No representation in terminfo for the delete word key: kdw1=\Ed
-# Key capabilities assume the power-up send sequence...
-# This <rmcup> is not strictly necessary, but it helps maximize
-# memory usefulness: <rmcup=\Ez>,
-# Alternate sgr0: <sgr0=\E[m\EW^O>,
-# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
-# smkx programs the SYS PF keys to send a set sequence.
-# It also sets up labels f1, f2, ..., f8, and sends edit keys.
-# This string causes them to send the strings <kf1>-<kf8>
-# when pressed in SYS PF mode.
-# (att4415: I added <rmam>/<smam> based on the init string -- esr)
-att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
- OTbs, db, mir, xon,
- lh#2, lm#78, lw#8, nlab#8, wsl#55,
- cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
- cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
- cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
- dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
- flash=\E[?5h$<200>\E[?5l, home=\E[x,
- hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
- il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
- is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
- is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
- kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
- kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
- kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
- kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
- lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
- mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
- rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
- rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
- sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
- smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
- tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
- use=att4410,
-
-att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
- cols#132, lm#54, wsl#97,
- is1=\E[?3h$<100>, use=att4415,
-
-att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
- flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
-
-att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
- cols#132, lm#54, wsl#97,
- flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
- use=att4415,
-
-# Note that this mode permits programming USER PF KEYS and labels
-# However, when you program user pf labels you have to reselect
-# user pf keys to make them appear!
-att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
- kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
- pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
- pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
-
-att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
- kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
- use=att4415,
-
-att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
- kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
- use=att4415-rv,
-
-att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
- kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
- use=att4415-w,
-
-att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
- kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
- use=att4415-w-rv,
-
-att5420_2|AT&T 5420 model 2 80 cols,
- am, db, hs, mir, msgr, xon,
- cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
- cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
- cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
- el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
- home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
- ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
- indn=\E[%p1%dE, invis=\E[8m,
- is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
- kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
- kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
- kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
- kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
- kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
- lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
- mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
- rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
- rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
- sc=\E7,
- sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
- smso=\E[7m, smul=\E[4m, tbc=\E[3g,
- tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
-att5420_2-w|AT&T 5420 model 2 in 132 column mode,
- cols#132,
- is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
- use=att5420_2,
-
-att4418|att5418|AT&T 5418 80 cols,
- am, xon,
- cols#80, lines#24,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
- cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
- cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
- ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
- is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
- kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
- kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
- kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
- kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
- kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
- rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
- sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
-att4418-w|att5418-w|AT&T 5418 132 cols,
- cols#132,
- is1=\E[?3h, use=att5418,
-
-att4420|tty4420|teletype 4420,
- OTbs, da, db, eo, msgr, ul, xon,
- cols#80, lines#24, lm#72,
- bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
- cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
- dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
- kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
- kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
- kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
- lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
- rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
-
-# The following is a terminfo entry for the Teletype 4424
-# asynchronous keyboard-display terminal. It supports
-# the vi editor. The terminal must be set up as follows,
-#
-# HIGHLIGHT DEFINITION 3-TONE
-# DISPLAY FUNCTION GROUP III
-#
-# The second entry below provides limited (a la adm3a)
-# operation under GROUP II.
-#
-# This must be used with DISPLAY FUNCTION GROUP I or III
-# and HIGHLIGHT DEFINITION 3-TONE
-# The terminal has either bold or blink, depending on options
-#
-# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
-att4424|tty4424|teletype 4424,
- OTbs, am, xon,
- cols#80, lines#24,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
- dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
- ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
- kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
- khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
- rmul=\EZ,
- sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
- sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
- tbc=\EF,
-
-att4424-1|tty4424-1|teletype 4424 in display function group I,
- kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
- use=att4424,
-
-# This entry is not one of AT&T's official ones, it was translated from the
-# 4.4BSD termcap file. The highlight strings are different from att4424.
-# I have no idea why this is -- older firmware version, maybe?
-# The following two lines are the comment originally attached to the entry:
-# This entry appears to avoid the top line - I have no idea why.
-# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
-att4424m|tty4424m|teletype 4424M,
- am, da, db, mir,
- cols#80, it#8, lines#23,
- bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
- dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
- is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
- kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
- sgr0=\E[m, smso=\E[7m, smul=\E[4m,
-
-# The Teletype 5425 is really version 2 of the Teletype 5420. It
-# is quite similar, except for some minor differences. No page
-# mode, for example, so all of the <cup> sequences used above have
-# to change back to what's being used for the 5410. Many of the
-# option settings have changed their numbering as well.
-#
-# This has been tested on a preliminary model.
-#
-# (att5425: added <rmam>/<smam> based on the init string -- esr)
-att5425|tty5425|att4425|AT&T 4425/5425,
- am, da, db, hs, mir, msgr, xenl, xon,
- cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
- clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
- el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
- flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
- hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
- invis=\E[8m, is1=\E<\E[?3l$<100>,
- is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
- is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
- kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
- kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
- kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
- kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
- nel=^M^J,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
- rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
- rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
- rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
- sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
- vpa=\E[%p1%{1}%+%dd,
-
-att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
- smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
-
-att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
- cols#132, lm#54, wsl#97,
- is1=\E[?3h$<100>, use=tty5425,
-
-# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
-# I also added <rmam>/<smam> -- esr)
-att4426|tty4426|teletype 4426S,
- am, da, db, xon,
- cols#80, lines#24, lm#48,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
- cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
- hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
- il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
- is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
- kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
- kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
- kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
- nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
- rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
- rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
- smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
- vpa=\E[%p1%dd,
-
-# Terminfo entry for the AT&T 510 A Personal Terminal
-# Function keys 9 - 16 are available only after the
-# screen labeled (soft keys/action blocks) are labeled. Function key
-# 9 corresponds to the leftmost touch target on the screen,
-# function key 16 corresponds to the rightmost.
-#
-# This entry is based on one done by Ernie Rice at Summit, NJ and
-# changed by Anne Gallup, Skokie, IL, ttrdc!anne
-att510a|bct510a|AT&T 510A Personal Terminal,
- am, mir, msgr, xenl, xon,
- cols#80, lh#2, lines#24, lw#7, nlab#8,
- acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
- civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
- dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
- el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
- hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
- is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
- kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
- kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
- kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
- mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
- pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
- rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
- sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g,
-
-# Terminfo entry for the AT&T 510 D Personal Terminal
-# Function keys 9 through 16 are accessed by bringing up the
-# system blocks.
-# Function key 9 corresponds to the leftmost touch target on the screen,
-# function key 16 corresponds to the rightmost.
-#
-# There are problems with soft key labeling. These are due to
-# strangenesses in the native terminal that are impossible to
-# describe in a terminfo.
-att510d|bct510d|AT&T 510D Personal Terminal,
- am, da, db, mir, msgr, xenl, xon,
- cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
- acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
- clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
- cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
- cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
- cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
- dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
- el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
- hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
- invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
- kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
- kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
- kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
- kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
- kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
- mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
- pln=\E[%p1%dp%p2%:-16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
- rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
- rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
- rs2=\E[5;0|, sc=\E7,
- sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
- smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
- smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
-
-# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
-att500|att513|AT&T 513 using page mode,
- am, chts, mir, msgr, xenl, xon,
- cols#80, lh#2, lines#24, lw#8, nlab#8,
- acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
- clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
- csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
- hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
- indn=\E[%p1%dE, invis=\E[8m,
- is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
- kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
- kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
- kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
- kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
- kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
- kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
- kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
- kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
- kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
- kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
- khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
- kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
- kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
- kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
- ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
- mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
- nel=\EE,
- pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
- pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
- pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
- pln=\E[%p1%dp%p2%:-16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
- rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
- rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
- rmul=\E[m,
- rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
- rs2=\E[5;0|, sc=\E7,
- sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smir=\E[4h,
- smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
- smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
-
-# 01-07-88
-# printer must be set to EMUL ANSI to accept ESC codes
-# <cuu1> stops at top margin
-# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
-# and alt font ascii,wrap on,tabs cleared
-# <is2> disables newline on LF,Emphasized off
-# The <u0> capability sets form length
-att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
- xhpa, xvpa,
- bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
- orhi#100, orl#12, orvi#72,
- cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
- cr=^M,
- csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
- cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
- ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
- lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
- rshm=\E[m,
- scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
- smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
- smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
- u0=\E[%p1%dt, vpa=\E[%p1%dd,
-
-# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
-# The following SET-UP modes are assumed for normal operation:
-# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
-# Other SET-UP modes may be set for operator convenience or communication
-# requirements. This termcap description is for the Resident Terminal Mode.
-# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# The BRL entry also said: UNSAFE :ll=\E[70H:
-att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
- am, xon,
- cols#88, it#8, lines#70, vt#3,
- bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
- dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
- home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
- il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
- kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
- rs1=\Ec, sc=\E7,
-
-# 5620 terminfo (2.0 or later ROMS with char attributes)
-# The following SET-UP modes are assumed for normal operation:
-# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
-# Other SET-UP modes may be set for operator convenience or communication
-# requirements. This termcap description is for Resident Terminal Mode. No
-# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# assumptions: <ind> (scroll forward one line) is only done at screen bottom
-# Be aware that older versions of the dmd have a firmware bug that affects
-# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
-# <msgr> is from an otherwise inferior BRL for this terminal. That entry
-# also has <ll>=\E[70H commented out and marked unsafe.
-# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
-att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
- OTbs, am, msgr, npc, xon,
- cols#88, it#8, lines#70,
- bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
- cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
- dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
- ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
- indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
- pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
- rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
- sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
-att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
- lines#24, use=att5620,
-att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
- lines#34, use=att5620,
-# 5620 layer running the "S" system's downloaded graphics handler:
-att5620-s|tty5620-s|layer|vitty|5620 S layer,
- OTbs, OTpt, am,
- cols#80, it#8, lines#72,
- bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
- cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
- el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
- kll=\E[70;1H,
-
-# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
-#
-# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
-# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
-att605|AT&T 605 80 column 102key keyboard,
- am, eo, xon,
- cols#80, lines#24, lw#8, nlab#8, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
- cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
- dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
- el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
- il1=\E[L, ind=^J, invis=\E[8m,
- is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
- kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
- kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
- kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
- kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
- kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
- kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
- kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
- kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
- kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
- kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
- kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
- kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
- mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
- rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
- rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
- smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
- tsl=\E7\E[25;%i%p1%dx,
-att605-pc|ATT 605 in pc term mode,
- acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
- cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
- dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
- kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
- kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
- kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
- rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
- xonc=e, use=att605,
-att605-w|AT&T 605-w 132 column 102 key keyboard,
- cols#132, wsl#132,
- is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
- use=att605,
-# (att610: I added <rmam>/<smam> based on the init string. I also
-# added <indn> and <rin> because the BSD file says the att615s have them,
-# and the 615 is like a 610 with a big keyboard, and most of their other
-# smart terminals support the same sequence -- esr)
-att610|AT&T 610; 80 column; 98key keyboard,
- am, eslok, hs, mir, msgr, xenl, xon,
- cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
- indn=\E[%p1%dS, invis=\E[8m,
- is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
- is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
- kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
- kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
- kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
- kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
- nel=\EE,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
- ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
- rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
-att610-w|AT&T 610; 132 column; 98key keyboard,
- cols#132, wsl#132,
- is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
- use=att610,
-
-att610-103k|AT&T 610; 80 column; 103key keyboard,
- kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
- kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
- kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
- kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
- kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
- kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
- kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
- kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
- khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
- knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
- kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
- krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
- kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
-att610-103k-w|AT&T 610; 132 column; 103key keyboard,
- cols#132, wsl#132,
- is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
- use=att610-103k,
-att615|AT&T 615; 80 column; 98key keyboard,
- kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
- kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
- kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
- kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
- kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
- kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
- kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
-att615-w|AT&T 615; 132 column; 98key keyboard,
- kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
- kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
- kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
- kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
- kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
- kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
- kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
-att615-103k|AT&T 615; 80 column; 103key keyboard,
- kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
-att615-103k-w|AT&T 615; 132 column; 103key keyboard,
- kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
-# (att620: I added <rmam>/<smam> based on the init string and
-# <rin>/<indn> from a BSD termcap -- esr)
-att620|AT&T 620; 80 column; 98key keyboard,
- am, eslok, hs, mir, msgr, xenl, xon,
- cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
- ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
- indn=\E[%p1%dS, invis=\E[8m,
- is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
- is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
- kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
- kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
- kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
- kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
- kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
- kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
- kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
- kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
- kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
- kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
- mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
- pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
- ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
- rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
- rs2=\Ec\E[?3l, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
- smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
- tsl=\E7\E[25;%i%p1%dx,
-att620-w|AT&T 620; 132 column; 98key keyboard,
- cols#132, wsl#132,
- is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
- use=att620,
-att620-103k|AT&T 620; 80 column; 103key keyboard,
- kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
- kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
- kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
- kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
- kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
- kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
- kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
- kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
- kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
- kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
- kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
- kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
- kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
- kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
- kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
- ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
-
-att620-103k-w|AT&T 620; 132 column; 103key keyboard,
- cols#132, wsl#132,
- is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
- use=att620-103k,
-
-# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
-# The following SETUP modes are assumed for normal operation:
-# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
-# Font_Size=Large Non-Layers_Window_Cols=80
-# Non-Layers_Window_Rows=60
-# Other SETUP modes may be set for operator convenience or communication
-# requirements. Some capabilities assume a printer attached to the Aux EIA
-# port. This termcap description is for the Fixed Non-Layers Window. No
-# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
-# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
-att630|AT&T 630 windowing terminal,
- OTbs, am, da, db, mir, msgr, npc, xon,
- cols#80, it#8, lines#60, lm#0,
- bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
- cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
- cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
- dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
- el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
- il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
- kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
- kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
- kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
- kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
- kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
- kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
- mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
- rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
- rmul=\E[m, rs2=\Ec, sc=\E7,
- sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
- sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
-att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
- lines#24, use=att630,
-
-# This is the att700 entry for 700 native emulation of the AT&T 700
-# terminal. Comments are relative to changes from the 605V2 entry and
-# att730 on which the entry is based. Comments show the terminfo
-# capability name, termcap name, and description.
-#
-# Here is what's going onm in the init string:
-# ESC [ 50;4| set 700 native mode (really is 605)
-# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
-# ESC [ 53;0| set GenFlow to Xon/Xoff
-# ESC [ 8 ;0| set CR on NL
-# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
-# ESC [ ? 4 l jump scroll
-# ESC [ ? 5 l/h video: normal (l); reverse (h)
-# ESC [ ?13 l Labels on
-# ESC [ ?15 l parity check = no
-# ESC [ 13 l monitor mode off
-# ESC [ 20 l LF on NL (not CRLF on NL)
-# ESC [ ? 7 h autowrap on
-# ESC [ 12 h local echo off
-# ESC ( B GO = ASCII
-# ESC ) 0 G1 = Special Char & Line Drawing
-# ESC [ ? 31 l Set 7 bit controls
-#
-# Note: Most terminals, especially the 600 family use Reverse Video for
-# standout mode. DEC also uses reverse video. The VT100 uses bold in addition
-# Assume we should stay with reverse video for 70.. However, the 605V2 exits
-# standout mode with \E[m (all normal attributes). The 730 entry simply
-# exits reverse video which would leave other current attributes intact. It
-# was assumed the 730 entry to be more correct so rmso has changed. The
-# 605V2 has no sequences to turn individual attributes off, thus its setting
-# and the rmso/smso settings from the 730.
-#
-# Note: For the same reason as above in rmso I changed exit under-score mode
-# to specifically turn off underscore, rather than return to all normal
-# attributes
-#
-# Note: The following pkey_xmit is taken from the 605V2 which contained the
-# capability as pfxl. It was changed here to pfx since pfxl
-# will only compile successfully with Unix 4.0 tic. Also note that pfx only
-# allows strings to be parameters and label values must be programmed as
-# constant strings. Supposedly the pfxl of Version 4.0 allows both labels
-# and strings to be parameters. The 605V2 pfx entry should be examined later
-# in this regard. For reference the 730 pfxl entry is shown here for comparison
-# 730 pfx entry:
-# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
-# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
-#
-# (for 4.0 tic)
-# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
-#
-# (for <4.0 tic)
-# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
-#
-# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
-#
-# Port1 Interface
-#
-# modular 10 pin Connector
-# Left side Right side
-# Pin 1 2 3 4 5 6 7 8 9 10
-#
-# Key (notch) at bottom
-#
-# Pin 1 DSR
-# 3 DCD
-# 4 DTR
-# 5 Sig Ground
-# 6 RD
-# 7 SD
-# 8 CTS
-# 9 RTS
-# 10 Frame Ground
-#
-# The manual is 189 pages and is loaded with details about the escape codes,
-# etc..... Available from AT&T CIC 800-432-6600...
-# ask for Document number 999-300-660..
-#
-att700|AT&T 700 24x80 column display w/102key keyboard,
- am, eslok, hs, mir, msgr, xenl, xon,
- cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
- fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
- il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
- is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
- is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
- kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
- kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
- kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
- kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
- kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
- kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
- kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
- kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
- kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
- kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
- kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
- kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
- mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
- pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
- rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
- rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
- smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
- tsl=\E7\E[99;%i%p1%dx,
-
-# This entry was modified 3/13/90 by JWE.
-# fixes include additions of <enacs>, correcting <rep>, and modification
-# of <kHOM>. (See comments below)
-# att730 has status line of 80 chars
-# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
-# the <kf25> and up keys are used for shifted system Fkeys
-# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
-# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
-# and 122 key keyboards, the 730's translation is \E[2J. For consistency
-# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
-# 102, 102+1, or 122 key keyboards
-# kHOM=\E[2J,
-# (att730: I added <rmam>/<smam> based on the init string -- esr)
-att730|AT&T 730 windowing terminal,
- am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
- cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
- clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
- csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
- dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
- enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
- home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
- ind=\ED, invis=\E[8m,
- is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
- is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
- kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
- kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
- kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
- kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
- kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
- kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
- kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
- kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
- kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
- kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
- kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
- mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
- pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
- pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
- pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
- rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
- rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
- rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
- sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
- sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
- smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
- swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
-att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
- lines#41, use=att730,
-att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
- lines#24, use=att730,
-att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
- flash=\E[?5l$<200>\E[?5h,
- is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
- use=att730,
-att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
- lines#41, use=att730r,
-att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
- lines#24, use=att730r,
-
-# The following represents the screen layout along with the associated
-# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
-# not appear on the screen but are shown to reference the bezel buttons.
-# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
-# position relative to the screen.
-#
-#
-#
-# +----------------------------------------------------------------+
-# | |
-# XXXX | kf0 kf24 | XXXX
-# | |
-# | |
-# XXXX | kf1 kf23 | XXXX
-# | |
-# | |
-# XXXX | kf2 kf22 | XXXX
-# | |
-# | |
-# XXXX | kf3 kf21 | XXXX
-# | |
-# | |
-# XXXX | kf4 kf20 | XXXX
-# | |
-# | |
-# XXXX | kf5 kf19 | XXXX
-# | |
-# | |
-# XXXX | kf6 kf18 | XXXX
-# | |
-# | |
-# XXXX | | XXXX
-# | |
-# | |
-# +----------------------------------------------------------------+
-#
-# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
-#
-# Note: XXXX represents the screen buttons
-# CMD REDRAW
-#
-# MAIL
-#
-# version 1 note:
-# The character string sent by key 'kf26' may be user programmable
-# to send either \E[16s, or \E[26s.
-# The character string sent by key 'krfr' may be user programmable
-# to send either \E[17s, or \E[27s.
-#
-# Depression of the "CMD" key sends \E! (kcmd)
-# Depression of the "MAIL" key sends \E[26s (kf26)
-# "REDRAW" same as "REFRESH" (krfr)
-#
-# "kf" functions adds carriage return to output string if terminal is in
-# 'new line' mode.
-#
-# The following are functions not covered in the table above:
-#
-# Set keyboard character (SKC): \EPn1;Pn2w
-# Pn1= 0 Back Space key
-# Pn1= 1 Break key
-# Pn2= Program char (hex)
-#
-# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
-# Pn1= Window number (1-39)
-# Pn2-Pn5= Y;X;Y;X coordinates
-#
-# Screen Selection (SSL): \E[Pnu
-# Pn= Window number
-#
-# Set Terminal Modes (SM): \E[Pnh
-# Pn= 3 Graphics mode
-# Pn= > Cursor blink
-# Pn= < Enter new line mode
-# Pn= = Enter reverse insert/replace mode
-# Pn= ? Enter no scroll mode
-#
-# Reset Terminal Mode (RM): \E[Pnl
-# Pn= 3 Exit graphics mode
-# Pn= > Exit cursor blink
-# Pn= < Exit new line mode
-# Pn= = Exit reverse insert/replace mode
-# Pn= ? Exit no scroll mode
-#
-# Screen Status Report (SSR): \E[Pnp
-# Pn= 0 Request current window number
-# Pn= 1 Request current window dimensions
-#
-# Device Status Report (DSR): \E[6n Request cursor position
-#
-# Call Status Report (CSR): \E[Pnv
-# Pn= 0 Call failed
-# Pn= 1 Call successful
-#
-# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
-# Pn1= Button number to be loaded
-# Pn2= Character count of "string"
-# Pn3= Key mode being loaded:
-# 0= Unshifted
-# 1= Shifted
-# 2= Control
-# String= Text string (15 chars max)
-#
-# Screen Number Report (SNR): \E[Pnp
-# Pn= Screen number
-#
-# Screen Dimension Report (SDR): \E[Pn1;Pn2r
-# Pn1= Number of rows available in window
-# Pn2= Number of columns available in window
-#
-# Cursor Position Report (CPR): \E[Pn1;Pn2R
-# Pn1= "Y" Position of cursor
-# Pn2= "X" Position of cursor
-#
-# Request Answer Back (RAB): \E[c
-#
-# Answer Back Response (ABR): \E[?;*;30;VSV
-# *= 0 No printer available
-# *= 2 Printer available
-# V= Software version number
-# SV= Software sub version number
-# (printer-available field not documented in v1)
-#
-# Screen Alignment Aid: \En
-#
-# Bell (lower pitch): \E[x
-#
-# Dial Phone Number: \EPdstring\
-# string= Phone number to be dialed
-#
-# Set Phone Labels: \EPpstring\
-# string= Label for phone buttons
-#
-# Set Clock: \EPchour;minute;second\
-#
-# Position Clock: \EPsY;X\
-# Y= "Y" coordinate
-# X= "X" coordinate
-#
-# Delete Clock: \Epr\
-#
-# Programming The Function Buttons: \EPfPn;string\
-# Pn= Button number (00-06, 18-24)
-# (kf00-kf06, kf18-kf24)
-# string= Text to sent on button depression
-#
-# The following in version 2 only:
-#
-# Request For Local Directory Data: \EPp12;\
-#
-# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
-#
-# Request for Local Directory Data in print format: \EPp13;\
-#
-# Enable 'Prt on Line' mode: \022 (DC2)
-#
-# Disable 'Prt on Line' mode: \024 (DC4)
-#
-
-# 05-Aug-86:
-# The following Terminfo entry describes functions which are supported by
-# the AT&T 5430/pt505 terminal software version 2 and later.
-att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
- am, xon,
- cols#80, it#8, lines#24,
- acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
- bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
- cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
- cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
- cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
- cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
- dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
- il=\E[%p1%dL, il1=\E[L, ind=^J,
- is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
- kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
- kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
- kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
- kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
- kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
- krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
- rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
- rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
- smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
-
-# The following Terminfo entry describes functions which are supported by
-# the AT&T 5430/pt505 terminal software version 1.
-att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
- lines#24,
- mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
-tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
- lines#22, use=att505,
-#
-#### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
-# This cut mark helps make life less painful for people running ncurses tic
-# on machines with relatively little RAM. The file can be broken in half here
-# cleanly and compiled in sections -- no `use' references cross this cut
-# going forward.
-#
-
-#### Ampex (Dialogue)
-#
-# Yes, these are the same people who are better-known for making audio- and
-# videotape. I'm told they are located in Redwood City, CA.
-#
-
-# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
-# (ampex80: some capabilities merged in from SCO's entry -- esr)
-ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
- OTbs, am, bw, ul,
- cols#80, it#8, lines#24,
- bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
- cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
- dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
- ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
- smso=\Ej, smul=\El, tbc=\E3,
-# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
-ampex175|ampex d175,
- am,
- cols#80, lines#24,
- bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
- is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
- kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
- rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
-# No backspace key in the main QWERTY cluster. Fortunately, it has a
-# NEWLINE/PAGE key just above RETURN that sends a strange single-character
-# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
-# mode), this key can be used as the erase key; I find I like this. Because
-# some people and some systems may not, there is another termcap ("ampex175")
-# that suppresses this little eccentricity by omitting the relevant capability.
-ampex175-b|ampex d175 using left arrow for erase,
- kbs=^_, use=ampex175,
-# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
-# (ampex210: removed obsolete ":kn#10:" -- esr)
-ampex210|a210|ampex a210,
- OTbs, am, hs, xenl,
- cols#80, it#8, lines#24, xmc#1,
- cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
- cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
- dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
- fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
- if=/usr/share/tabset/std, il1=\EE, invis@,
- is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
- kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
- kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
- kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
- tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
-# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
-# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
-# and moved the padding to be *after* the caps -- esr)
-ampex219|ampex-219|amp219|Ampex with Automargins,
- hs, xenl,
- cols#80, it#8, lines#24,
- bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
- clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
- csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
- cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
- cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
- el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
- is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
- kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
- kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
- kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
- rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
- rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
- smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
-ampex219w|ampex-219w|amp219w|Ampex 132 cols,
- cols#132, lines#24,
- bel=^G, cr=^M, cud1=^J, ind=^J,
- is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
-# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
-ampex232|ampex-232|Ampex Model 232,
- am,