# Report bugs and new terminal descriptions to
# bug-ncurses@gnu.org
#
-# $Revision: 1.581 $
-# $Date: 2016/12/31 22:04:20 $
+# $Revision: 1.595 $
+# $Date: 2017/03/11 23:17:18 $
#
# The original header is preserved below for reference. It is noted that there
# is a "newer" version which differs in some cosmetic details (but actually
# nsterm*|Apple_Terminal - AppKit Terminal.app
#
-# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
+# Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and
# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
# Server and Mac OS X operating systems. There is also a
-# "terminal.app" in GNUStep, but I believe it to be an unrelated
+# "terminal.app" in GNUstep, but I believe it to be an unrelated
# codebase and I have not attempted to describe it here.
#
-# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
+# For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
# are pretty much on your own. Use "nsterm-7-m" and hope for the best.
# You might also try "nsterm-7" and "nsterm-old" if you suspect your
# version supports color.
#
# The Mythology* of AppKit Terminal.app:
#
-# In the days of NeXTSTep 0.x and 1.x there were two incompatible
+# In the days of NeXTSTEP 0.x and 1.x there were two incompatible
# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
# shareware replacement for Terminal called "Stuart" which NeXT bought
-# and used as the basis for the Terminal.app in NeXTstep 2+,
+# and used as the basis for the Terminal.app in NeXTSTEP 2+,
# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
# capabilities for the early versions, but I believe that the
# TERM_PROGRAM_VERSION may have been reset at some point.
#
# The early versions were tailored to the NeXT character set. Sometime
-# after the Apple aquisition the encoding was swiched to MacRoman
-# (initally with serious altcharset bugs due to incomplete conversion
-# of the old NeXT code,) and then later to UTF-8. Alos sometime during
+# after the Apple acquisition the encoding was switched to MacRoman
+# (initially with serious altcharset bugs due to incomplete conversion
+# of the old NeXT code,) and then later to UTF-8. Also sometime during
# or just prior to the early days of Mac OS X, the Terminal grew ANSI
# 8-color support (initially buggy when combined with attributes, but
# that was later fixed.) More recently, around Mac OS X version 10.3
# "nsterm" to comply with the name length and case conventions and
# limitations of various software packages [notably Solaris terminfo
# and UNIX.] A single Apple_Terminal alias is retained for
-# backwards-compatbility.
+# backwards-compatibility.
#
# * Added function key support (F1-F4). These only work in Terminal.app
# version 51, hopefully the capabilities won't cause problems for people
initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
use=linux,
+# FbTerm
+# Another variant. There are two parts (src, src/lib) with the latter
+# comprising the escape-sequence parsing. The copyright notice on that
+# says it is based on GTerm by Timothy Miller.
+#
+# The original developer "dragchan" has left, but as of March 2017 there is
+# (still dead) code from May 2015 here:
+# https://github.com/izmntuk/fbterm
+#
+# The acsc string may be incorrect.
+#
+# Not used here, the program recognizes escapes for italic, underline and
+# dim, rendering those as green, cyan and gray respectively.
+fbterm|FbTerm for Linux with framebuffer,
+ colors#256, pairs#32767,
+ acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i
+ \316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u
+ \264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+ initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,
+ setab=\E[2;%p1%d}, setaf=\E[1;%p1%d}, setb=\E[2;%p1%d},
+ setf=\E[1;%p1%d},
+ sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5
+ %t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+ sgr0=\E[0;10m, smacs=\E[11m, use=linux,
+
# 16-color linux console entry; this works with a 256-character
# console font but bright background colors turn into dim ones when
# you use a 512-character console font. This uses bold for bright
cols#132, lines#50, use=arm100,
# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
-# manufactured by Sharp for the Japenese market.
+# manufactured by Sharp for the Japanese market.
# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
x68k|x68k-ite|NetBSD/x68k ITE,
cols#96, lines#32,
# | | | | | | | |
# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
# | | | 1-On | | | 1-50 Hz
-# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
+# | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
# | | 1-ANSI | | 1-8 Bits
# | Keyclick 0-Off | Parity 0-Off
# | 1-On | 1-On
#
# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
vt100|vt100-am|dec vt100 (w/advanced video),
- OTbs, am, mc5i, msgr, xenl, xon,
- cols#80, it#8, lines#24, vt#3,
+ OTbs, mc5i, xenl, xon,
+ vt#3,
+ csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,
+ kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
+ mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,
+ rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,
+ sc=\E7,
+ sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
+ %;m%?%p9%t\016%e\017%;$<2>,
+ smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,
+ use=vt100+4bsd, use=vt100+fnkeys,
+vt100+4bsd|dec vt100 from 4.0BSD,
+ am, msgr,
+ cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
- clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
- cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
- cuf=\E[%p1%dC, cuf1=\E[C$<2>,
+ clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
- kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
- lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
- rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
- rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
- rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,
+ rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5
- %;m%?%p9%t\016%e\017%;$<2>,
- sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
- smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
- use=vt100+fnkeys,
+ %;m%?%p9%t\016%e\017%;,
+ sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,
+ smul=\E[4m$<2>, tbc=\E[3g,
vt100nam|vt100-nam|vt100 no automargins,
am@, xenl@,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,
khome=\EOH,
#
# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27)
-# and revised in patch #167 (2002/8/24). Some other terminal emulators copied
-# the earlier scheme, as noted in the "use=" clauses in this file.
+# and revised in xterm patch #167 (2002/8/24). Some other terminal emulators
+# copied the earlier scheme, as noted in the "use=" clauses in this file.
#
# The original assignments from patch #94 for cursor-keys had some technical
# issues:
xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
-# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
+# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0
+# (T.Dickey)
+#
# If configured to support 88- or 256-colors (which is fairly common in 2009),
# xterm also recognizes the control sequences for initc -TD
xterm-16color|xterm with 16 colors like aixterm,
use=xterm-new,
# 256-colors is a compile-time feature of XFree86 xterm beginning with
-# patch #111 (1999/7/10) -TD
+# xterm patch #111 (1999/7/10) -TD
xterm+256color|xterm 256-color feature,
ccc,
colors#256, pairs#32767,
setb@, setf@,
# 88-colors is a compile-time feature of XFree86 xterm beginning with
-# patch #115 (1999/9/18) -TD
+# xterm patch #115 (1999/9/18) -TD
#
# Note that the escape sequences used are the same as for 256-colors - xterm
# has a different table of default color resource values. If built for
# GNOME terminal may automatically use the contents of the "xterm" terminfo to
# supply key information which is not built into the program. With 2.22.3,
-# this list is built into the program (which addresses the inadvertant use of
+# this list is built into the program (which addresses the inadvertent use of
# random terminfo data, though using a set of values which does not correspond
# to any that xterm produces - still not solving the problem that GNOME
# terminal hardcodes the $TERM variable as "xterm").
# dates, nor give developer's names. Initial color support was added for rxvt
# "2.0", which was sometime in 1994.
#
-# rxvt had usable color support with 2.16 (April 2, 1996), with some help by my work on
-# vttest, as well as bug reports to Mark Olesen. For instance, the fix
+# rxvt had usable color support with 2.16 (April 2, 1996), with some help by my
+# work on vttest, as well as bug reports to Mark Olesen. For instance, the fix
# mentioned here
# http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
# was from one of my bug-reports -TD
# a line.
# b) has xterm-style shifted function-key strings
# meta also is used, but control is ignored.
-# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
+# c) has xterm-style modifiers for cursor keys (shift, control, shift+control,
+# meta)
# d) some combinations of shift/control send xterm-style sequences for
# insert/delete/home/end.
# e) numeric keypad sends only numbers (compare with vttest).
#### Emacs
+# https://www.emacswiki.org/emacs/AnsiTerm
+# https://github.com/emacs-mirror/emacs/blob/master/lisp/term.el
+#
# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
eterm|gnu emacs term.el terminal emulation,
am, mir, xenl,
sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
u6=\E[%i%d;%dR, u7=\E[6n,
+# shell.el can "do" color, though not nearly as well.
+#
+# seen here:
+# http://unix.stackexchange.com/questions/237943/changing-colors-used-by-ls-does-not-work-in-emacs-shell-mode
+#
+# and
+# https://lists.gnu.org/archive/html/bug-gnu-emacs/2012-08/msg00481.html
+# https://github.com/emacs-mirror/emacs/blob/master/lisp/shell.el
+# https://github.com/emacs-mirror/emacs/blob/master/lisp/ansi-color.el
+#
+# however, as tested with Emacs 24.5.1, the result is buggy, losing overlays
+# frequently. The contemporaneous term.el aka ansi-term does not "support"
+# italics but does not lose the color information -TD 2017/01/28.
+dumb-emacs-ansi|Emacs dumb terminal with ANSI color codes,
+ am, hc,
+ colors#8, it#8, ncv#13, pairs#64,
+ bold=\E[1m, cud1=^J, ht=^I, ind=^J, op=\E[39;49m,
+ ritm=\E[23m, rmul=\E[24m, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm, sgr0=\E[m, sitm=\E[3m, smul=\E[4m,
+
#### Screen
# Entries for use by the `screen' program by Juergen Weigert,
sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
smul=\E[4m, tbc=\E[3g,
+#### Tmux
+
# tmux is compatible with screen, but has support for italics, and some of the
# xterm cursor bits.
tmux|tmux terminal multiplexer,
- ritm=\E[23m, rmso=\E[27m, sitm=\E[3m, smso=\E[7m, Ms@,
- use=xterm+sl, use=xterm+tmux, use=screen,
+ ritm=\E[23m, rmso=\E[27m, sitm=\E[3m, smso=\E[7m,
+ use=xterm+edit, use=xterm+pcfkeys, use=xterm+sl,
+ use=xterm+tmux, use=screen,
tmux-256color|tmux with 256 colors,
use=xterm+256setaf, use=tmux,
+#### Dvtm
+
+# dvtwm 0.15
+# http://www.brain-dump.org/projects/dvtm/
+#
+# + This uses ncurses to manage the display, including support for italics and
+# default-colors.
+# + However, default-colors are incomplete: do not set bce.
+# + It does not implement flash (since no \e[?5h)
+# + Do not set XT: dvtm knows about OSC 0 and 2, but not 1.
+# Oddly enough, if $TERM contains "linux", it attempts to set the title.
+# + Some of the program is cut/paste from rxvt-unicode, e.g., the ACS table.
+# + The built-in table of function-keys (based on rxvt) is incomplete (ends
+# with kf22).
+# + It also omits the shifted cursor- and editing-keypad keys.
+# However, it is confused by xterm's shifted cursor- and editing-keypad keys
+# (and passes those through without interpretation)
+# and may simply pass-through rxvt's, making it appear to work.
+# In other cases such as kf23 and up, no pass-through is done.
+# + Most of the mode-settings in the initialization/reset strings are not
+# implemented; dvtm copies its description from rxvt.
+dvtm|dynamic virtual terminal manager,
+ am, eo, mir, msgr, xenl, AX,
+ colors#8, cols#80, it#8, lines#24, ncv@, pairs#64,
+ acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+ bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+ clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
+ csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+ cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+ cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+ dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+ enacs=\E(B\E)0, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
+ ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+ is1=\E[?47l\E=\E[?1l,
+ is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
+ kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d,
+ kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy,
+ kb2=\EOu, kbs=\177, kc1=\EOq, kc3=\EOs, kcbt=\E[Z,
+ kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+ kdch1=\E[3~, kel=\E[8\^, kend=\E[8~, kent=\EOM, kf0=\E[21~,
+ kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+ kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+ kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
+ kf20=\E[34~, kf21=\E[23$, kf22=\E[24$, kf3=\E[13~,
+ kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+ kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~,
+ kind=\E[a, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\E[b,
+ kslt=\E[4~, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
+ ritm=\E[23m, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
+ rmso=\E[27m, rmul=\E[24m,
+ rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+ rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?
+ 25h,
+ s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[4%p1%dm,
+ setaf=\E[3%p1%dm,
+ sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?
+ %p9%t\016%e\017%;,
+ sgr0=\E[m\017, sitm=\E[3m, smacs=^N, smcup=\E7\E[?47h,
+ smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ vpa=\E[%i%p1%dd,
+
+dvtm-256color|dynamic virtual terminal manager with 256 colors,
+ colors#256, pairs#32767,
+ setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;
+ 5;%p1%d%;m,
+ setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5
+ ;%p1%d%;m,
+ use=dvtm,
+
#### NCSA Telnet
# Francesco Potorti <F.Potorti@cnuce.cnr.it>:
# kPRV [shifted prev key] not implemented
# khome [home key] really is \E[1~ NOT \E[H
# tbc [clear tab stops] not implemented
-# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni
+# xenl [newline ignored after 80 cols] messes up last line? Ehud Karni
# smpch [Start PC charset] is \E[11m, same as smacs
# rmpch [End PC charset] is \E[10m, same as rmacs
# mir [move in insert mode] fails in tack?
# From: Federico Bianchi
# This is the entry for the OpenNT terminal.
-# The ntconsole name is for backward compatability.
+# The ntconsole name is for backward compatibility.
# This is for OpenNT 2.0 and later.
# Later OpenNT was renamed to Interix.
#
#
# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
# moved <rmir> here from hpsub -- esr)
-hpex|hp extended capabilites,
+hpex|hp extended capabilities,
cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
# on off off Busy active on J5-19, CD disabled - Factory Set.
# on off on Busy active on J5-19, CD enabled
#
-# sw4 Used in conjuction with S4 for comm interface control - Fact 0
+# sw4 Used in conjunction with S4 for comm interface control - Fact 0
#
# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
#
OTbs, OTpt,
OTkn#4,
if=/usr/share/tabset/vt100,
- is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100,
+ is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,
# (adm42: removed obsolete ":ma=^K^P:" -- esr)
adm42|lsi adm42,
OTbs, am,
# (including some with magic cookies), fancy half-duplex mode, and
# different bugs.
#
-# Some operations reqire truly incredible amounts of padding. The
+# Some operations require truly incredible amounts of padding. The
# insert_line (<il1>) and delete_line (<dl1>) operations in particular
# are so slow as to be nearly unusable.
#
ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
- use=vt100,
+ use=vt100+4bsd,
#### Wyse (wy)
#
# terminfo. At one point, I found some reference indicating that this
# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
# me), but I can't find that and the server under my bookmark to "Wyse
-# Technical" isn't responding. So there's the question of wether the wy85
-# terminfo should reflect the manufactuer's intended behaviour of the terminal
+# Technical" isn't responding. So there's the question of whether the wy85
+# terminfo should reflect the manufacturer's intended behaviour of the terminal
# or the actual."
wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
am, hs, mc5i, mir, msgr, xenl, xon,
# These entries attempt to describe Avatar, a terminal emulation used with
# MS-DOS bulletin-board systems. It was designed to give ANSI-like
# capabilities, but with cheaper (shorter) control sequences. Messy design,
-# excessively dependent on PC idiosyncracies, but apparently rather popular
+# excessively dependent on PC idiosyncrasies, but apparently rather popular
# in the BBS world.
#
# No color support. Avatar doesn't fit either of the Tektronix or HP color
# ^V^Q%c -- query the driver
# ^V^R -- driver reset
# ^V^S -- Sound tone (PC-specific)
-# ^V^T -- change highlight at current cursor poition to %c
+# ^V^T -- change highlight at current cursor position to %c
# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
# -- define window
# Briefly, the settings are for the following modes:
# (values are for bit set/clear with * indicating our preference
# and the value used to test these termcaps)
-# Note that many of these settings are irrelevent to the terminfo
+# Note that many of these settings are irrelevant to the terminfo
# and are just set to the default mode of the terminal as shipped
# by the factory.
#
# Cursor forward FF
# Cursor home RS
# Cursor up VT
-# Cursor supress ETB
+# Cursor suppress ETB
# Cursor enable CAN
# Erase to end of line ESC,T
# Erase to end of page ESC,Y
# tset or setterm etc.) provided that the terminal has been manually set
# up (and the setup saved with ^S) to be compatible with this termcap. To be
# compatible it should be in ANSI mode (not VT52). A set-up that
-# works is to set all the manually setable stuff to factory defaults
-# by pressing ^D in set-up mode. Then increse the brighness with the
+# works is to set all the manually settable stuff to factory defaults
+# by pressing ^D in set-up mode. Then increase the brightness with the
# up-arrow key since the factory default will likely be dim on an old
# terminal. Then change any options you want (provided that they are
# compatible with the termcap). For my terminal I set: Screen
clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
kcuu1=^W, khome=^Y,
-cdc721ll|CDC Vikingll,
+cdc721ll|CDC Viking with long lines,
OTbs, am,
cols#132, lines#24,
clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
# there is no way of knowing what it is that the program wants turned
# off.
# smul: The "underline" attribute is reconfigurable to an overline or
-# strikethru, or (as done with \E[;3+} in is2=), to a line at the true
+# strike-through, or (as done with \E[;3+} in is2=), to a line at the true
# bottom of the character cell. This was done to allow for more readable
# underlined characters, and to be able to distinguish between an
# underlined space, an underscore, and an underlined underscore.
# It's not made clear in the manuals, but based on other ansi/vt type
# terminals, it's a good guess that this terminal is capable of both
# "transparent print" (which doesn't copy data to the screen, and
-# therefore needs mc5i: specified to say so) and "auxilliary print"
+# therefore needs mc5i: specified to say so) and "auxiliary print"
# (which does duplicate printed data on the screen, in which case mc4=
# and mc5= should use the \E[?4i and \E[?5i strings instead).
#
# 2 Margin Bell 0=off 1=on
# Keyclick 0=off 1=on
-# Ansi/VT52 0=VT52 1=Ansi
+# ANSI/VT52 0=VT52 1=ANSI
# Xon/Xoff 0=Off 1=On
#
# 3 Shift3 0=Hash 1=UK Pound
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
- use=vt100,
+ use=vt100+4bsd,
# except in 132 column mode, where it needs a little padding.
# This is still less padding than the vt100, and you can always turn on
# the ^S/^Q handshaking, so you can use vt100 flavors for things like
#ctrl-A set SOM position at cursor position
#ctrl-G Bell
#ctrl-H Backspace
-#ctrl-I Horiz tab
+#ctrl-I Horizontal tab
#ctrl-J Linefeed
#ctrl-K Cursor up
#ctrl-L Cursor right
colors#8, pairs#64,
op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
use=ncr260vt300pp,
-# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
+# The Intecolor emulation of the NCR 2900/260C color terminal is basically a
# DEC vt200/300 with color capabilities added.
ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
colors#8, pairs#64,
# 'setf' definition. The escape sequence to set color attributes is
# ESC d y <foreground_color> <background_color> 1
# In addition, the background color can be changed through the desk accessories.
-# The capablitiy 'op' sets colors to green on black (default combination).
+# The capability 'op' sets colors to green on black (default combination).
#
# NOTE: The NCR Unix System Administrator's Shell will not function properly
# if the 'pairs' capability is defined. Un-Comment the 'pairs'
is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2
\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h
\E[?8h,
- rc@, sc@, smkx=\E=, use=vt100,
+ rc@, sc@, smkx=\E=, use=vt100+4bsd,
# From: <jcoker@ucbic>
# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
# Steve Jacobson 8/85
pcplot|pc-plot terminal emulation program,
xenl@,
- csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
+ csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,
# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
# I've found that my KayPro II, running MDM730, continues to emulate an
# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
OTdN#30,
blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
# Lisaterm in 132 column ("wide") mode.
-mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
+mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,
cols#132, use=mac,
#### Radio Shack/Tandy
u8=\001%[ABCPpqrstuvwxyz{|}~\177]\004\r, .invis=\E@,
.u8=\001Cu|\004r, use=minitel1b,
-### Note:
+# Note:
#
# Faire, Fnct T puis "/" (TS+"?") pour activer les touches en 40cols :
#
# Ctrl+Suite-7(F19), Ctrl+Suite-8(F20), Ctrl+Suite-9(F21),
# Ctrl+Suite-0(F22), Ctrl+Suite-*(F23), Ctrl+Suite-#(F24).
#
-### Fonctionne par exemple avec Midnight Commander (mc).
+# Fonctionne par exemple avec Midnight Commander (mc).
minitel2-80|minitel 2 (80cols) avec filets vt100 (DEC),
G0,
# 1. Using double-shapes for vt100 graphical chars (eg: mc).
# 2. Native brown color corrected to good yellow color.
# 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.
-# 4. Suppressed inexistant underlined mode (normally as bright).
+# 4. Suppressed nonexistent underlined mode (normally as bright).
# 5. ich/ich1 not filled because of non-curses programs.
#--
-# 6. Suppressed inexistant invisible mode.
+# 6. Suppressed nonexistent invisible mode.
#(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.
linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),
# From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016
#
# He comments:
-# viewdata lacks a true cup capabilitie,
+# viewdata lacks a true cup capability,
# so I achieved it with home and cud1/cuf1 sequences only !
viewdata|prestel/viewdata terminals,
am, bw, eslok, hz,
# Approximate date of release was 1982 (early 80s, anyway), and it had several
# evolutions including (limited) color versions such as the PS330C. PS300s
# were effectively obsolete by the late 80s, replaced by raster graphics
-# systems, although specialized applications like molecular modelling
+# systems, although specialized applications like molecular modeling
# hung onto them for a while longer. AFAIK all E&S vector graphics systems
# are out of production, though of course E&S is very much alive (in 1996).
# (ps300: changed ":pt@:" to "it@" -- esr)
ps300|Picture System 300,
xt,
it@,
- rmso@, rmul@, smso@, smul@, use=vt100,
+ rmso@, rmul@, smso@, smul@, use=vt100+4bsd,
#### General Electric (ge)
#
# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
# cursor, bc -> block cursor.
# From: Mike Meyers
-# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
+# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>
# looks vt100-compatible -- esr)
z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
OTbs, OTpt, am, eslok, hs, mir, msgr,
\E[11m,
sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
-z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
+z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11
m,
use=z29a,
is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11
;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s
\E\^11;81s\E\^11;89s,
- rf@, ri=\EM\E[K$<5/>, use=vt100,
+ rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,
# The GX-1000 manual is dated 1984. This looks rather like a VT-52.
modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
am, da, db,
#### Ramtek
#
# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
-# were competition for things like the Tektronics 4025.
+# were competition for things like the Tektronix 4025.
#
# Ramtek 6221 from BRL, probably by Doug Gwyn
OTdN@, cols#80, lines#24, lm#96,
cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
- kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
+ kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
+ use=vt100+4bsd,
tab132-w|tab132 in wide mode,
cols#132,
is2=\E[?7h\E[?3h\E[?5l, use=tab132,
# Software (formerly Peripherals Computers & Supplies, Inc) of
# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
# also be reached at support@synergy.com.
-versaterm|versaterm vt100 emulator for the macintosh,
+versaterm|versaterm vt100 emulator for the Macintosh,
am, xenl,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;
1%;m$<2>,
- sgr0=\E[0m$<2>, smacs@, use=vt100,
+ sgr0=\E[0m$<2>, smacs@, use=vt100+4bsd,
# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
# coupler attached, the whole rig fitting in a suitcase and more or less
# portable. Hot stuff for c.1977 :-) -- esr
# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
# Coded Character Sets"), include your snail-mail address, and you should
-# receive the document in due course. Don't expect an email acknowledgement.
+# receive the document in due course. Don't expect an email acknowledgment.
#
# Related standards include "X3.4-1977: American National Standard Code for
# Information Interchange" (the ASCII standard) and "X3.41.1974:
# sequences. In the main table, \E stands for an escape (\033) character,
# SPC for space. Pn stands for a single numeric parameter to be inserted
# in decimal ASCII. Ps stands for a list of such parameters separated by
-# semicolons. Parameter meanings for most parametrized sequences are
-# decribed in the notes.
+# semicolons. Parameter meanings for most parameterized sequences are
+# described in the notes.
#
# Sequence Sequence Parameter or
# Mnemonic Name Sequence Value Mode terminfo
# APC Applicatn Program Command \E _ - Delim -
# BEL Bell * ^G - - bel
# BPH Break Permitted Here * \E B - * -
-# BS Backpace * ^H - EF -
+# BS BackSpace * ^H - EF -
# CAN Cancel * ^X - - - (A)
# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
# CCH Cancel Previous Character \E T - - -
# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
# abbreviation.
#
-# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
-# char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
-# 5 = clear all char tabs, 6 = clear all line tabs.
+# (F) CTC parameter values:
+# 0 = set char tab,
+# 1 = set line tab,
+# 2 = clear char tab,
+# 3 = clear line tab,
+# 4 = clear all char tabs on current line,
+# 5 = clear all char tabs,
+# 6 = clear all line tabs.
#
# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
# abbreviation.
#
-# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
-# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
-# DSR, 6 = request CPR response.
+# (I) DSR parameter values:
+# 0 = ready,
+# 1 = busy,
+# 2 = busy, will send DSR later,
+# 3 = malfunction,
+# 4 = malfunction, will send DSR later,
+# 5 = request DSR,
+# 6 = request CPR response.
#
-# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
-# 1 = clear from beginning, 2 = clear.
+# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:
+# 0 = clear to end,
+# 1 = clear from beginning,
+# 2 = clear.
#
# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
#
# (N) ECMA-48 calls this "Character Tabulation" but retains the HT
# abbreviation.
#
-# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
-# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
-# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
-# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
-# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
-# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
-# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
-# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
-# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
-# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
-# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
-# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
-# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
-# 61-65 = variable highlights for ideograms.
+# (O) SGR parameter values:
+# 0 = default mode (attributes off),
+# 1 = bold,
+# 2 = dim,
+# 3 = italicized,
+# 4 = underlined,
+# 5 = slow blink,
+# 6 = fast blink,
+# 7 = reverse video,
+# 8 = invisible,
+# 9 = crossed-out (marked for deletion),
+# 10 = primary font,
+# 10 + n (n in 1..9) = nth alternative font,
+# 20 = Fraktur,
+# 21 = double underline,
+# 22 = turn off 2,
+# 23 = turn off 3,
+# 24 = turn off 4,
+# 25 = turn off 5,
+# 26 = proportional spacing,
+# 27 = turn off 7,
+# 28 = turn off 8,
+# 29 = turn off 9,
+# 30 = black fg,
+# 31 = red fg,
+# 32 = green fg,
+# 33 = yellow fg,
+# 34 = blue fg,
+# 35 = magenta fg,
+# 36 = cyan fg,
+# 37 = white fg,
+# 38 = set fg color as in CCITT T.416,
+# 39 = set default fg color,
+# 40 = black bg
+# 41 = red bg,
+# 42 = green bg,
+# 43 = yellow bg,
+# 44 = blue bg,
+# 45 = magenta bg,
+# 46 = cyan bg,
+# 47 = white bg,
+# 48 = set bg color as in CCITT T.416,
+# 49 = set default bg color,
+# 50 = turn off 26,
+# 51 = framed,
+# 52 = encircled,
+# 53 = overlined,
+# 54 = turn off 51 & 52,
+# 55 = not overlined,
+# 56-59 = reserved,
+# 61-65 = variable highlights for ideograms.
#
# (P) SI is also called LSO, Locking Shift Zero.
#
# use CUD for this function and ignore VPR. ECMA calls it `Line Position
# Absolute' but retains the VPA abbreviation.
#
-# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
-# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
-# from secondary aux device, 4 = stop relay to primary aux device, 5 =
-# start relay to primary aux device, 6 = stop relay to secondary aux device,
-# 7 = start relay to secondary aux device.
+# (S) MC parameters:
+# 0 = start xfer to primary aux device,
+# 1 = start xfer from primary aux device,
+# 2 = start xfer to secondary aux device,
+# 3 = start xfer from secondary aux device,
+# 4 = stop relay to primary aux device,
+# 5 = start relay to primary aux device,
+# 6 = stop relay to secondary aux device,
+# 7 = start relay to secondary aux device.
#
# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
# abbreviation.
#
# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
#
-# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
-# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
-# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
-# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
-# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
-# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
-# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
-# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
-# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
-# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
-# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
-# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
-# from ECMA-48's 5th edition but are listed here for reference.
+# (W) RM/SM modes are as follows:
+# 1 = Guarded Area Transfer Mode (GATM),
+# 2 = Keyboard Action Mode (KAM),
+# 3 = Control Representation Mode (CRM),
+# 4 = Insertion Replacement Mode (IRM),
+# 5 = Status Report Transfer Mode (SRTM),
+# 6 = Erasure Mode (ERM),
+# 7 = Line Editing Mode (LEM),
+# 8 = Bi-Directional Support Mode (BDSM),
+# 9 = Device Component Select Mode (DCSM),
+# 10 = Character Editing Mode (HEM),
+# 11 = Positioning Unit Mode (PUM),
+# 12 = Send/Receive Mode (SRM),
+# 13 = Format Effector Action Mode (FEAM),
+# 14 = Format Effector Transfer Mode (FETM),
+# 15 = Multiple Area Transfer Mode (MATM),
+# 16 = Transfer Termination Mode (TTM),
+# 17 = Selected Area Transfer Mode (SATM),
+# 18 = Tabulation Stop Mode (TSM),
+# 19 = Editing Boundary Mode (EBM),
+# 20 = Line Feed New Line Mode (LF/NL),
+# 21 = Graphic Rendition Combination Mode (GRCM),
+# 22 = Zero Default Mode (ZDM).
+#
+# The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition
+# but are listed here for reference.
#
# (X) Select Alternate Presentation Variants is used only for non-Latin
# alphabets.
#
# There is a set of nonstandard terminfos used by IBM's AIX operating system.
# The AIX terminfo library diverged from SVr1 terminfo, and replaces all
-# capabilities following prtr_non with the following special capabilties:
+# capabilities following prtr_non with the following special capabilities:
# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
#
#### XTERM Extensions:
#
-# Most of the xterm extensions are for function-keys. Since patch #94 (in
+# Most of the xterm extensions are for function-keys. Since xterm patch #94 (in
# 1999), xterm has supported shift/control/alt/meta modifiers which produce
# additional function-key strings. Some other developers copied the feature,
-# though they did not follow xterm's lead in patch #167 (in 2002), to make
+# though they did not follow xterm's lead in xterm patch #167 (in 2002), to make
# these key definitions less ambiguous.
#
# A few terminals provide similar functionality (sending distinct keys when
# 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
# * Merged in DEC's official entries for its terminals. The only old
# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
-# * Replaced the translated BBN Bitgraph entries with purpose-built
+# * Replaced the translated BBN BitGraph entries with purpose-built
# ones from AT&T's SVr3.
# * Replaced the AT&T entries with AT&T's official terminfos.
# * Added teleray 16, vc415, cops10.
# * Corrected hpa/vpa in linux entry. They still fail the worm test.
# * We can handle the HP meml/memu capability now.
# * Added smacs to klone entries, just as documentation.
-# * Carrected ansi.sys and cit-500 entries.
+# * Corrected ansi.sys and cit-500 entries.
# * Added z39, vt320-k311, v220c, and avatar entries.
# * Make pcansi use the ansi.sys invis capability.
# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
# * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
#
# 1998/10/10
-# * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
+# * update xterm-xfree86 to current (xterm patch #84), for is2/rs2 changes - TD
# * correct initialization string in xterm-r5, add misc other features
-# to correspond with xterm patch 84 - TD
+# to correspond with xterm patch #84 - TD
#
# 1998/12/19
-# * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
+# * update xterm-xfree86 to current (xterm patch #90), smcur/rmcur changes - TD
# * add Mathew Vernon's mach console entries
# * corrections for ncsa function-keys (report by Larry Virden)
#
# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
# xterm and ncsa entries by removing the unneeded ones. Note that
# some entries will return kend & khome versus kslt and kfnd, for
-# PC-style keyboards versus strict vt220 compatiblity - TD
+# PC-style keyboards versus strict vt220 compatibility - TD
#
# 1999/3/13
# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
# (Jeffrey C Honig)
#
# 1999/3/27
-# * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
+# * adjust xterm-xfree86 miscellaneous keypad keys, as per xterm patch #94 - TD.
#
# 1999/4/10
# * add linux-lat, from RedHat patches to ncurses 4.2
# * add entries for mterm (mterm, mterm-ansi, decansi) -TD
# * ncr260wy350pp has only 16 color pairs -TD
# * add sun-type4 from NetBSD -TD
-# * update xterm-xfree86 to current (patch 170) -TD
+# * update xterm-xfree86 to current (xterm patch #170) -TD
# * add screen-bce, screen-s entries -TD
# * add xterm-1002, xterm-1003 entries -TD
#
# * similar fixups for cvvis/cnorm various entries -TD
#
# 2004-05-22
-# * remove 'ncv' from xterm-256color (patch 188) -TD
+# * remove 'ncv' from xterm-256color (xterm patch #188) -TD
#
# 2004-06-26
# * add mlterm -TD
#
# 2007-11-11
# * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to
-# xterm starting with patch #216 -TD
+# xterm starting with xterm patch #216 -TD
# * make legacy xterm entries such as xterm-24 inherit from xterm-old,
# to match xterm #230 -TD
# * extend xterm+pccX entries to match xterm #230 -TD
#
# 2009-12-19
# * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
-# * rename minix to minix-1.7, add minix entry for Minux3 -TD
+# * rename minix to minix-1.7, add minix entry for Minix3 -TD
#
# 2009-12-26
# * add bterm (bogl 0.1.18) -TD
# * correct padding in sbi entry -TD
#
# 2014-06-07
-# * update xterm-new to patch #305 -TD
+# * update xterm-new to xterm patch #305 -TD
# + change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
# (italic). This was a long-ago typo in screen 3.1.1 which was
# overlooked until a few terminal emulators implemented the feature -TD
# + modify flash capability for linux and wyse entries to put the delay
# between the reverse/normal escapes rather than after -TD
#
+# 2017-01-28
+# + minor comment-fixes to help automate links to bug-urls -TD
+# + add dvtm, dvtm-256color -TD
+# + add settings corresponding to xterm-keys option to tmux entry to
+# reflect upcoming change to make that option "on" by default
+# (patch by Nicholas Marriott).
+# + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).
+# + add dumb-emacs-ansi -TD
+#
+# 2017-03-05
+# + correct a few spelling errors in comments -TD
+# + add fbterm -TD
+#
+# 2017-03-11
+# + add vt100+4bsd building block, use that for older terminals rather
+# than "vt100" which is now mostly used as a building block for
+# terminal emulators -TD
+# + modify vt100 rs2 string to reset vt52 mode and scrolling regions
+# (report/analysis by Robert King) -TD
+#
######## SHANTIH! SHANTIH! SHANTIH!
projects / ncurses.git / blobdiff