/****************************************************************************
- * Copyright (c) 1998-2011,2012 Free Software Foundation, Inc. *
+ * Copyright 2018-2023,2024 Thomas E. Dickey *
+ * Copyright 1998-2016,2017 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
#define CUR SP_TERMTYPE
#endif
-MODULE_ID("$Id: lib_mouse.c,v 1.136 2012/02/22 22:40:24 tom Exp $")
+MODULE_ID("$Id: lib_mouse.c,v 1.200 2024/02/17 21:13:01 tom Exp $")
#include <tic.h>
#undef buttons /* symbol conflict in consio.h */
#undef mouse_info /* symbol conflict in consio.h */
#include <osreldate.h>
-#if (__FreeBSD_version >= 400017)
+#if defined(__DragonFly_version) || (defined(__FreeBSD__) && (__FreeBSD_version >= 400017))
#include <sys/consio.h>
#include <sys/fbio.h>
#else
#define MASK_RESERVED_EVENT(x) (mmask_t) NCURSES_MOUSE_MASK(x, 040)
#if NCURSES_MOUSE_VERSION == 1
+
#define BUTTON_CLICKED (BUTTON1_CLICKED | BUTTON2_CLICKED | BUTTON3_CLICKED | BUTTON4_CLICKED)
#define BUTTON_PRESSED (BUTTON1_PRESSED | BUTTON2_PRESSED | BUTTON3_PRESSED | BUTTON4_PRESSED)
#define BUTTON_RELEASED (BUTTON1_RELEASED | BUTTON2_RELEASED | BUTTON3_RELEASED | BUTTON4_RELEASED)
#define BUTTON_DOUBLE_CLICKED (BUTTON1_DOUBLE_CLICKED | BUTTON2_DOUBLE_CLICKED | BUTTON3_DOUBLE_CLICKED | BUTTON4_DOUBLE_CLICKED)
#define BUTTON_TRIPLE_CLICKED (BUTTON1_TRIPLE_CLICKED | BUTTON2_TRIPLE_CLICKED | BUTTON3_TRIPLE_CLICKED | BUTTON4_TRIPLE_CLICKED)
+
#define MAX_BUTTONS 4
+
#else
+
#define BUTTON_CLICKED (BUTTON1_CLICKED | BUTTON2_CLICKED | BUTTON3_CLICKED | BUTTON4_CLICKED | BUTTON5_CLICKED)
#define BUTTON_PRESSED (BUTTON1_PRESSED | BUTTON2_PRESSED | BUTTON3_PRESSED | BUTTON4_PRESSED | BUTTON5_PRESSED)
#define BUTTON_RELEASED (BUTTON1_RELEASED | BUTTON2_RELEASED | BUTTON3_RELEASED | BUTTON4_RELEASED | BUTTON5_RELEASED)
#define BUTTON_DOUBLE_CLICKED (BUTTON1_DOUBLE_CLICKED | BUTTON2_DOUBLE_CLICKED | BUTTON3_DOUBLE_CLICKED | BUTTON4_DOUBLE_CLICKED | BUTTON5_DOUBLE_CLICKED)
#define BUTTON_TRIPLE_CLICKED (BUTTON1_TRIPLE_CLICKED | BUTTON2_TRIPLE_CLICKED | BUTTON3_TRIPLE_CLICKED | BUTTON4_TRIPLE_CLICKED | BUTTON5_TRIPLE_CLICKED)
+
+#if NCURSES_MOUSE_VERSION == 2
#define MAX_BUTTONS 5
+#else
+#define MAX_BUTTONS 11
+#endif
+
#endif
#define INVALID_EVENT -1
char buf[6];
unsigned long ignore;
- strncpy(buf, key_mouse, 3); /* should be "\033[M" */
+ _nc_STRCPY(buf, "\033[M", sizeof(buf)); /* should be the same as key_mouse */
buf[3] = ' ' + (button - 1) + (down ? 0 : 0x40);
buf[4] = ' ' + x - LEFT_COL + 1;
buf[5] = ' ' + y - TOP_ROW + 1;
}
#endif /* USE_SYSMOUSE */
-#ifndef USE_TERM_DRIVER
+#if !defined(USE_TERM_DRIVER) || defined(EXP_WIN32_DRIVER)
#define xterm_kmous "\033[M"
static void
init_xterm_mouse(SCREEN *sp)
{
sp->_mouse_type = M_XTERM;
+ sp->_mouse_format = MF_X10;
sp->_mouse_xtermcap = tigetstr("XM");
- if (!VALID_STRING(sp->_mouse_xtermcap))
- sp->_mouse_xtermcap = "\033[?1000%?%p1%{1}%=%th%el%;";
+ if (VALID_STRING(sp->_mouse_xtermcap)) {
+ char *code = strstr(sp->_mouse_xtermcap, "[?");
+ if (code != 0) {
+ code += 2;
+ while ((*code >= '0') && (*code <= '9')) {
+ char *next = code;
+ while ((*next >= '0') && (*next <= '9')) {
+ ++next;
+ }
+ if (!strncmp(code, "1006", (size_t) (next - code))) {
+ sp->_mouse_format = MF_SGR1006;
+ }
+#ifdef EXP_XTERM_1005
+ if (!strncmp(code, "1005", (size_t) (next - code))) {
+ sp->_mouse_format = MF_XTERM_1005;
+ }
+#endif
+ if (*next == ';') {
+ while (*next == ';') {
+ ++next;
+ }
+ code = next;
+ } else {
+ break;
+ }
+ }
+ }
+ } else {
+ int code = tigetnum("XM");
+ switch (code) {
+#ifdef EXP_XTERM_1005
+ case 1005:
+ /* see "xterm+sm+1005" */
+ sp->_mouse_xtermcap = "\033[?1005;1000%?%p1%{1}%=%th%el%;";
+ sp->_mouse_format = MF_XTERM_1005;
+ break;
+#endif
+ case 1006:
+ /* see "xterm+sm+1006" */
+ sp->_mouse_xtermcap = "\033[?1006;1000%?%p1%{1}%=%th%el%;";
+ sp->_mouse_format = MF_SGR1006;
+ break;
+ default:
+ sp->_mouse_xtermcap = "\033[?1000%?%p1%{1}%=%th%el%;";
+ break;
+ }
+ }
}
#endif
static void
enable_xterm_mouse(SCREEN *sp, int enable)
{
+ TPUTS_TRACE(enable
+ ? "xterm mouse initialization"
+ : "xterm mouse deinitialization");
#if USE_EMX_MOUSE
sp->_emxmouse_activated = enable;
#else
- NCURSES_SP_NAME(_nc_putp) (NCURSES_SP_ARGx
- "xterm-mouse",
- TPARM_1(sp->_mouse_xtermcap, enable));
+ NCURSES_PUTP2("xterm-mouse", TIPARM_1(sp->_mouse_xtermcap, enable));
#endif
sp->_mouse_active = enable;
}
+#if defined(USE_TERM_DRIVER)
+static void
+enable_win32_mouse(SCREEN *sp, int enable)
+{
+#if defined(EXP_WIN32_DRIVER)
+ enable_xterm_mouse(sp, enable);
+#else
+ sp->_mouse_active = enable;
+#endif
+}
+#endif
+
#if USE_GPM_SUPPORT
static bool
-allow_gpm_mouse(void)
+allow_gpm_mouse(SCREEN *sp GCC_UNUSED)
{
bool result = FALSE;
- /* GPM does printf's without checking if stdout is a terminal */
- if (isatty(fileno(stdout))) {
- char *list = getenv("NCURSES_GPM_TERMS");
- char *env = getenv("TERM");
+#if USE_WEAK_SYMBOLS
+ /* Danger Robinson: do not use dlopen for libgpm if already loaded */
+ if ((Gpm_Wgetch) != 0) {
+ if (!sp->_mouse_gpm_loaded) {
+ T(("GPM library was already dlopen'd, not by us"));
+ }
+ } else
+#endif
+ /* GPM does printf's without checking if stdout is a terminal */
+ if (NC_ISATTY(fileno(stdout))) {
+ const char *list = getenv("NCURSES_GPM_TERMS");
+ const char *env = getenv("TERM");
if (list != 0) {
if (env != 0) {
result = _nc_name_match(list, env, "|:");
T(("unload GPM library"));
sp->_mouse_gpm_loaded = FALSE;
sp->_mouse_fd = -1;
- dlclose(sp->_dlopen_gpm);
- sp->_dlopen_gpm = 0;
}
}
load_gpm_library(SCREEN *sp)
{
sp->_mouse_gpm_found = FALSE;
- if ((sp->_dlopen_gpm = dlopen(LIBGPM_SONAME, my_RTLD)) != 0) {
+
+ /*
+ * If we already had a successful dlopen, reuse it.
+ */
+ if (sp->_dlopen_gpm != 0) {
+ sp->_mouse_gpm_found = TRUE;
+ sp->_mouse_gpm_loaded = TRUE;
+ } else if ((sp->_dlopen_gpm = dlopen(LIBGPM_SONAME, my_RTLD)) != 0) {
+#if (defined(__GNUC__) && (__GNUC__ >= 5)) || defined(__clang__)
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wpedantic"
+#endif
if (GET_DLSYM(gpm_fd) == 0 ||
GET_DLSYM(Gpm_Open) == 0 ||
GET_DLSYM(Gpm_Close) == 0 ||
GET_DLSYM(Gpm_GetEvent) == 0) {
+#if (defined(__GNUC__) && (__GNUC__ >= 5)) || defined(__clang__)
+#pragma GCC diagnostic pop
+#endif
T(("GPM initialization failed: %s", dlerror()));
unload_gpm_library(sp);
+ dlclose(sp->_dlopen_gpm);
+ sp->_dlopen_gpm = 0;
} else {
sp->_mouse_gpm_found = TRUE;
sp->_mouse_gpm_loaded = TRUE;
}
}
}
-#endif
+#endif /* HAVE_LIBDL */
static bool
enable_gpm_mouse(SCREEN *sp, bool enable)
/* Try gpm first, because gpm may be configured to run in xterm */
#if USE_GPM_SUPPORT
- if (allow_gpm_mouse()) {
+ if (allow_gpm_mouse(sp)) {
if (!sp->_mouse_gpm_loaded) {
#ifdef HAVE_LIBDL
load_gpm_library(sp);
/* OS/2 VIO */
#if USE_EMX_MOUSE
if (!sp->_emxmouse_thread
- && strstr(TerminalOf(sp)->type.term_names, "xterm") == 0
- && key_mouse) {
+ && strstr(SP_TERMTYPE term_names, "xterm") == 0
+ && NonEmpty(key_mouse)) {
int handles[2];
if (pipe(handles) < 0) {
int rc;
if (!sp->_emxmouse_buttons[0]) {
- char *s = getenv("MOUSE_BUTTONS_123");
+ const char *s = getenv("MOUSE_BUTTONS_123");
sp->_emxmouse_buttons[0] = 1;
if (s && strlen(s) >= 3) {
#if USE_SYSMOUSE
{
+ static char dev_tty[] = "/dev/tty";
struct mouse_info the_mouse;
char *the_device = 0;
- if (isatty(sp->_ifd))
+ if (NC_ISATTY(sp->_ifd))
the_device = ttyname(sp->_ifd);
if (the_device == 0)
- the_device = "/dev/tty";
+ the_device = dev_tty;
sp->_mouse_fd = open(the_device, O_RDWR);
#endif /* USE_SYSMOUSE */
#ifdef USE_TERM_DRIVER
- CallDriver(sp, initmouse);
-#else
+ CallDriver(sp, td_initmouse);
+#endif
+#if !defined(USE_TERM_DRIVER) || defined(EXP_WIN32_DRIVER)
/* we know how to recognize mouse events under "xterm" */
- if (key_mouse != 0) {
- if (!strcmp(key_mouse, xterm_kmous)
- || strstr(TerminalOf(sp)->type.term_names, "xterm") != 0) {
- init_xterm_mouse(sp);
- }
- } else if (strstr(TerminalOf(sp)->type.term_names, "xterm") != 0) {
+ if (NonEmpty(key_mouse)) {
+ init_xterm_mouse(sp);
+ } else if (strstr(SP_TERMTYPE term_names, "xterm") != 0) {
if (_nc_add_to_try(&(sp->_keytry), xterm_kmous, KEY_MOUSE) == OK)
init_xterm_mouse(sp);
}
/* initialize the mouse */
{
bool result = FALSE;
- int i;
+
+ T((T_CALLED("_nc_mouse_init(%p)"), (void *) sp));
if (sp != 0) {
if (!sp->_mouse_initialized) {
+ int i;
+
sp->_mouse_initialized = TRUE;
- TR(MY_TRACE, ("_nc_mouse_init() called"));
+ TR(MY_TRACE, ("set _mouse_initialized"));
sp->_mouse_eventp = FirstEV(sp);
for (i = 0; i < EV_MAX; i++)
initialize_mousetype(sp);
- T(("_nc_mouse_init() set mousetype to %d", sp->_mouse_type));
+ T(("set _mouse_type to %d", sp->_mouse_type));
}
result = sp->_mouse_initialized;
}
- return result;
+ returnCode(result);
}
/*
return result; /* true if we found an event */
}
+#if USE_EMX_MOUSE
+#define PRESS_POSITION(n) \
+ do { \
+ eventp->bstate = MASK_PRESS(n); \
+ sp->_mouse_bstate |= MASK_PRESS(n); \
+ if (button & 0x40) { \
+ eventp->bstate = MASK_RELEASE(n); \
+ sp->_mouse_bstate &= ~MASK_PRESS(n); \
+ } \
+ } while (0)
+#else
+#define PRESS_POSITION(n) \
+ do { \
+ eventp->bstate = (mmask_t) ((sp->_mouse_bstate & MASK_PRESS(n)) \
+ ? REPORT_MOUSE_POSITION \
+ : MASK_PRESS(n)); \
+ sp->_mouse_bstate |= MASK_PRESS(n); \
+ } while (0)
+#endif
+
static bool
-_nc_mouse_inline(SCREEN *sp)
-/* mouse report received in the keyboard stream -- parse its info */
+handle_wheel(SCREEN *sp, MEVENT * eventp, int button, int wheel)
{
- int b;
- bool result = FALSE;
- MEVENT *eventp = sp->_mouse_eventp;
+ bool result = TRUE;
+
+ switch (button & 3) {
+ case 0:
+ if (wheel) {
+ eventp->bstate = MASK_PRESS(4);
+ /* Do not record in sp->_mouse_bstate; there will be no
+ * corresponding release event.
+ */
+ } else {
+ PRESS_POSITION(1);
+ }
+ break;
+ case 1:
+ if (wheel) {
+#if NCURSES_MOUSE_VERSION >= 2
+ eventp->bstate = MASK_PRESS(5);
+ /* See comment above for button 4 */
+#else
+ /* Ignore this event as it is not a true press of the button */
+ eventp->bstate = REPORT_MOUSE_POSITION;
+#endif
+ } else {
+ PRESS_POSITION(2);
+ }
+ break;
+ case 2:
+ PRESS_POSITION(3);
+ break;
+ default:
+ /*
+ * case 3 is sent when the mouse buttons are released.
+ *
+ * If the terminal uses xterm mode 1003, a continuous series of
+ * button-release events is sent as the mouse moves around the screen,
+ * or as the wheel mouse is rotated.
+ *
+ * Return false in this case, so that when running in X10 mode, we will
+ * recalculate bstate.
+ */
+ eventp->bstate = REPORT_MOUSE_POSITION;
+ result = FALSE;
+ break;
+ }
+ return result;
+}
- TR(MY_TRACE, ("_nc_mouse_inline() called"));
+static bool
+decode_X10_bstate(SCREEN *sp, MEVENT * eventp, unsigned intro)
+{
+ bool result;
+ int button = 0;
+ int wheel = (intro & 96) == 96;
- if (sp->_mouse_type == M_XTERM) {
- unsigned char kbuf[4];
- size_t grabbed;
- int res;
+ eventp->bstate = 0;
- /* This code requires that your xterm entry contain the kmous
- * capability and that it be set to the \E[M documented in the
- * Xterm Control Sequences reference. This is how we
- * arrange for mouse events to be reported via a KEY_MOUSE
- * return value from wgetch(). After this value is received,
- * _nc_mouse_inline() gets called and is immediately
- * responsible for parsing the mouse status information
- * following the prefix.
- *
- * The following quotes from the ctrlseqs.ms document in the
- * X distribution, describing the X mouse tracking feature:
- *
- * Parameters for all mouse tracking escape sequences
- * generated by xterm encode numeric parameters in a single
- * character as value+040. For example, ! is 1.
- *
- * On button press or release, xterm sends ESC [ M CbCxCy.
- * The low two bits of Cb encode button information: 0=MB1
- * pressed, 1=MB2 pressed, 2=MB3 pressed, 3=release. The
- * upper bits encode what modifiers were down when the
- * button was pressed and are added together. 4=Shift,
- * 8=Meta, 16=Control. Cx and Cy are the x and y coordinates
- * of the mouse event. The upper left corner is (1,1).
- *
- * (End quote) By the time we get here, we've eaten the
- * key prefix. FYI, the loop below is necessary because
- * mouse click info isn't guaranteed to present as a
- * single clist item.
- *
- * Wheel mice may return buttons 4 and 5 when the wheel is turned.
- * We encode those as button presses.
+ if (intro >= 96) {
+ if (intro >= 160) {
+ button = (int) (intro - 152); /* buttons 8-11 */
+ } else {
+ button = (int) (intro - 92); /* buttons 4-7 */
+ }
+ } else {
+ button = (intro & 3);
+ }
+
+ if (button > MAX_BUTTONS) {
+ eventp->bstate = REPORT_MOUSE_POSITION;
+ } else if (!handle_wheel(sp, eventp, (int) intro, wheel)) {
+
+ /*
+ * Release events aren't reported for individual buttons, just for
+ * the button set as a whole. However, because there are normally
+ * no mouse events under xterm that intervene between press and
+ * release, we can infer the button actually released by looking at
+ * the previous event.
*/
-# if USE_PTHREADS_EINTR
-# if USE_WEAK_SYMBOLS
- if ((pthread_self) && (pthread_kill) && (pthread_equal))
-# endif
- _nc_globals.read_thread = pthread_self();
-# endif
- for (grabbed = 0; grabbed < 3; grabbed += (size_t) res) {
-
- /* For VIO mouse we add extra bit 64 to disambiguate button-up. */
+ if (sp->_mouse_bstate & BUTTON_PRESSED) {
+ int b;
+
+ eventp->bstate = BUTTON_RELEASED;
+ for (b = 1; b <= MAX_BUTTONS; ++b) {
+ if (!(sp->_mouse_bstate & MASK_PRESS(b)))
+ eventp->bstate &= ~MASK_RELEASE(b);
+ }
+ sp->_mouse_bstate = 0;
+ } else {
+ /*
+ * xterm will return a stream of release-events to let the
+ * application know where the mouse is going, if private mode
+ * 1002 or 1003 is enabled.
+ */
+ eventp->bstate = REPORT_MOUSE_POSITION;
+ }
+ }
+
+ if (intro & 4) {
+ eventp->bstate |= BUTTON_SHIFT;
+ }
+ if (intro & 8) {
+ eventp->bstate |= BUTTON_ALT;
+ }
+ if (intro & 16) {
+ eventp->bstate |= BUTTON_CTRL;
+ }
+ result = (eventp->bstate & REPORT_MOUSE_POSITION) ? TRUE : FALSE;
+ return result;
+}
+
+/* This code requires that your xterm entry contain the kmous capability and
+ * that it be set to the \E[M documented in the Xterm Control Sequences
+ * reference. This is how we arrange for mouse events to be reported via a
+ * KEY_MOUSE return value from wgetch(). After this value is received,
+ * _nc_mouse_inline() gets called and is immediately responsible for parsing
+ * the mouse status information following the prefix.
+ *
+ * The following quotes from the ctlseqs.ms document in the XTerm distribution,
+ * describing the mouse tracking feature:
+ *
+ * Parameters for all mouse tracking escape sequences generated by xterm encode
+ * numeric parameters in a single character as value+040. For example, ! is
+ * 1.
+ *
+ * On button press or release, xterm sends ESC [ M CbCxCy. The low two bits of
+ * Cb encode button information: 0=MB1 pressed, 1=MB2 pressed, 2=MB3 pressed,
+ * 3=release. The upper bits encode what modifiers were down when the button
+ * was pressed and are added together. 4=Shift, 8=Meta, 16=Control. Cx and Cy
+ * are the x and y coordinates of the mouse event. The upper left corner is
+ * (1,1).
+ *
+ * (End quote) By the time we get here, we've eaten the key prefix. FYI, the
+ * loop below is necessary because mouse click info isn't guaranteed to present
+ * as a single clist item.
+ *
+ * Wheel mice may return buttons 4 and 5 when the wheel is turned. We encode
+ * those as button presses.
+ */
+static bool
+decode_xterm_X10(SCREEN *sp, MEVENT * eventp)
+{
+#define MAX_KBUF 3
+ unsigned char kbuf[MAX_KBUF + 1];
+ size_t grabbed;
+ int res;
+ bool result;
+
+ _nc_set_read_thread(TRUE);
+ for (grabbed = 0; grabbed < MAX_KBUF; grabbed += (size_t) res) {
+
+ /* For VIO mouse we add extra bit 64 to disambiguate button-up. */
+ res = (int) read(
#if USE_EMX_MOUSE
- res = (int) read(M_FD(sp) >= 0 ? M_FD(sp) : sp->_ifd, &kbuf, 3);
+ (M_FD(sp) >= 0) ? M_FD(sp) : sp->_ifd,
#else
- res = (int) read(sp->_ifd, kbuf + grabbed, 3 - grabbed);
+ sp->_ifd,
#endif
- if (res == -1)
- break;
- }
-#if USE_PTHREADS_EINTR
- _nc_globals.read_thread = 0;
-#endif
- kbuf[3] = '\0';
+ kbuf + grabbed, (size_t) (MAX_KBUF - (int) grabbed));
+ if (res == -1)
+ break;
+ }
+ _nc_set_read_thread(FALSE);
+ kbuf[MAX_KBUF] = '\0';
- TR(TRACE_IEVENT,
- ("_nc_mouse_inline sees the following xterm data: '%s'", kbuf));
+ TR(TRACE_IEVENT,
+ ("_nc_mouse_inline sees the following xterm data: '%s'", kbuf));
- /* there's only one mouse... */
- eventp->id = NORMAL_EVENT;
+ /* there's only one mouse... */
+ eventp->id = NORMAL_EVENT;
+
+ result = decode_X10_bstate(sp, eventp, kbuf[0]);
+
+ eventp->x = (kbuf[1] - ' ') - 1;
+ eventp->y = (kbuf[2] - ' ') - 1;
- /* processing code goes here */
- eventp->bstate = 0;
+ return result;
+}
+
+#ifdef EXP_XTERM_1005
+/*
+ * This is identical to X10/X11 responses except that there are two UTF-8
+ * characters storing the ordinates instead of two bytes.
+ */
+static bool
+decode_xterm_1005(SCREEN *sp, MEVENT * eventp)
+{
+ char kbuf[80];
+ size_t grabbed;
+ size_t limit = (sizeof(kbuf) - 1);
+ unsigned coords[2];
+ bool result;
+ coords[0] = 0;
+ coords[1] = 0;
+
+ _nc_set_read_thread(TRUE);
+ for (grabbed = 0; grabbed < limit;) {
+ int res;
+
+ res = (int) read(
#if USE_EMX_MOUSE
-#define PRESS_POSITION(n) \
- do { \
- eventp->bstate = MASK_PRESS(n); \
- sp->_mouse_bstate |= MASK_PRESS(n); \
- if (kbuf[0] & 0x40) { \
- eventp->bstate = MASK_RELEASE(n); \
- sp->_mouse_bstate &= ~MASK_PRESS(n); \
- } \
- } while (0)
+ (M_FD(sp) >= 0) ? M_FD(sp) : sp->_ifd,
#else
-#define PRESS_POSITION(n) \
- do { \
- eventp->bstate = (mmask_t) (sp->_mouse_bstate & MASK_PRESS(n) \
- ? REPORT_MOUSE_POSITION \
- : MASK_PRESS(n)); \
- sp->_mouse_bstate |= MASK_PRESS(n); \
- } while (0)
+ sp->_ifd,
#endif
+ (kbuf + grabbed), (size_t) 1);
+ if (res == -1)
+ break;
+ grabbed += (size_t) res;
+ if (grabbed > 1) {
+ size_t check = 1;
+ int n;
- switch (kbuf[0] & 0x3) {
- case 0x0:
- if ((kbuf[0] & 96) == 96) {
- eventp->bstate = MASK_PRESS(4);
- /* Do not record in sp->_mouse_bstate; there will be no
- * corresponding release event.
- */
- } else {
- PRESS_POSITION(1);
+ for (n = 0; n < 2; ++n) {
+ int rc;
+
+ if (check >= grabbed)
+ break;
+ rc = _nc_conv_to_utf32(&coords[n], kbuf + check, (unsigned)
+ (grabbed - check));
+ if (!rc)
+ break;
+ check += (size_t) rc;
}
- break;
+ if (n >= 2)
+ break;
+ }
+ }
+ _nc_set_read_thread(FALSE);
- case 0x1:
- if ((kbuf[0] & 96) == 96) {
-#if NCURSES_MOUSE_VERSION == 2
- eventp->bstate = MASK_PRESS(5);
- /* See comment above for button 4 */
+ TR(TRACE_IEVENT,
+ ("_nc_mouse_inline sees the following xterm data: %s",
+ _nc_visbufn(kbuf, (int) grabbed)));
+
+ /* there's only one mouse... */
+ eventp->id = NORMAL_EVENT;
+
+ result = decode_X10_bstate(sp, eventp, UChar(kbuf[0]));
+
+ eventp->x = (int) (coords[0] - ' ') - 1;
+ eventp->y = (int) (coords[1] - ' ') - 1;
+
+ return result;
+}
+#endif /* EXP_XTERM_1005 */
+
+/*
+ * ECMA-48 section 5.4
+ */
+#define isInter(c) ((c) >= 0x20 && (c) <= 0x2f)
+#define isParam(c) ((c) >= 0x30 && (c) <= 0x3f)
+#define isFinal(c) ((c) >= 0x40 && (c) <= 0x7e)
+
+#define MAX_PARAMS 9
+
+typedef struct {
+ int nerror; /* nonzero if there are unexpected chars */
+ int nparam; /* number of numeric parameters */
+ int params[MAX_PARAMS];
+ int final; /* the final-character */
+} SGR_DATA;
+
+static bool
+read_SGR(SCREEN *sp, SGR_DATA * result)
+{
+ char kbuf[80]; /* bigger than any possible mouse response */
+ int grabbed = 0;
+ int ch = 0;
+ int now = -1;
+ int marker = 1;
+
+ memset(result, 0, sizeof(*result));
+ _nc_set_read_thread(TRUE);
+
+ do {
+ int res;
+
+ res = (int) read(
+#if USE_EMX_MOUSE
+ (M_FD(sp) >= 0) ? M_FD(sp) : sp->_ifd,
#else
- /* Ignore this event as it is not a true press of the button */
- eventp->bstate = REPORT_MOUSE_POSITION;
+ sp->_ifd,
#endif
- } else {
- PRESS_POSITION(2);
+ (kbuf + grabbed), (size_t) 1);
+ if (res == -1)
+ break;
+ if ((grabbed + MAX_KBUF) >= (int) sizeof(kbuf)) {
+ result->nerror++;
+ break;
+ }
+ ch = UChar(kbuf[grabbed]);
+ kbuf[grabbed + 1] = 0;
+ switch (ch) {
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ case '8':
+ case '9':
+ if (marker) {
+ ++now;
+ result->nparam = (now + 1);
}
+ marker = 0;
+ result->params[now] = (result->params[now] * 10) + (ch - '0');
break;
-
- case 0x2:
- PRESS_POSITION(3);
+ case ';':
+ if (marker) {
+ ++now;
+ result->nparam = (now + 1);
+ }
+ marker = 1;
break;
-
- case 0x3:
- /*
- * Release events aren't reported for individual buttons, just for
- * the button set as a whole. However, because there are normally
- * no mouse events under xterm that intervene between press and
- * release, we can infer the button actually released by looking at
- * the previous event.
- */
- if (sp->_mouse_bstate & BUTTON_PRESSED) {
- eventp->bstate = BUTTON_RELEASED;
- for (b = 1; b <= MAX_BUTTONS; ++b) {
- if (!(sp->_mouse_bstate & MASK_PRESS(b)))
- eventp->bstate &= ~MASK_RELEASE(b);
- }
- sp->_mouse_bstate = 0;
- } else {
+ default:
+ if (ch < 32 || ch > 126) {
/*
- * XFree86 xterm will return a stream of release-events to
- * let the application know where the mouse is going, if the
- * private mode 1002 or 1003 is enabled.
+ * Technically other characters could be interspersed in the
+ * response. Ignore those for now.
*/
- eventp->bstate = REPORT_MOUSE_POSITION;
+ result->nerror++;
+ continue;
+ } else if (isFinal(ch)) {
+ if (marker) {
+ result->nparam++;
+ }
+ result->final = ch;
+ } else {
+ result->nerror++;
}
break;
}
- result = (eventp->bstate & REPORT_MOUSE_POSITION) ? TRUE : FALSE;
+ ++grabbed;
+ } while (!isFinal(ch));
+ _nc_set_read_thread(FALSE);
+
+ kbuf[++grabbed] = 0;
+ TR(TRACE_IEVENT,
+ ("_nc_mouse_inline sees the following xterm data: '%s'", kbuf));
+ return (grabbed > 0) && (result->nerror == 0);
+}
+
+static bool
+decode_xterm_SGR1006(SCREEN *sp, MEVENT * eventp)
+{
+ SGR_DATA data;
+ bool result = FALSE;
+ if (read_SGR(sp, &data)) {
+ int b = data.params[0];
+ int b3 = 1 + (b & 3);
+ int wheel = ((b & 64) == 64);
+
+ if (b >= 132) {
+ b3 = MAX_BUTTONS + 1;
+ } else if (b >= 128) {
+ b3 = (b - 120); /* buttons 8-11 */
+ } else if (b >= 64) {
+ b3 = (b - 60); /* buttons 6-7 */
+ }
- if (kbuf[0] & 4) {
+ eventp->id = NORMAL_EVENT;
+ if (data.final == 'M') {
+ (void) handle_wheel(sp, eventp, b, wheel);
+ } else if (b3 > MAX_BUTTONS) {
+ eventp->bstate = REPORT_MOUSE_POSITION;
+ } else {
+ mmask_t pressed = (mmask_t) NCURSES_MOUSE_MASK(b3, NCURSES_BUTTON_PRESSED);
+ mmask_t release = (mmask_t) NCURSES_MOUSE_MASK(b3, NCURSES_BUTTON_RELEASED);
+ if (sp->_mouse_bstate & pressed) {
+ eventp->bstate = release;
+ sp->_mouse_bstate &= ~pressed;
+ } else {
+ eventp->bstate = REPORT_MOUSE_POSITION;
+ }
+ }
+ if (b & 4) {
eventp->bstate |= BUTTON_SHIFT;
}
- if (kbuf[0] & 8) {
+ if (b & 8) {
eventp->bstate |= BUTTON_ALT;
}
- if (kbuf[0] & 16) {
+ if (b & 16) {
eventp->bstate |= BUTTON_CTRL;
}
+ result = (eventp->bstate & REPORT_MOUSE_POSITION) ? TRUE : FALSE;
+ eventp->x = (data.params[1] ? (data.params[1] - 1) : 0);
+ eventp->y = (data.params[2] ? (data.params[2] - 1) : 0);
+ }
+ return result;
+}
+
+static bool
+_nc_mouse_inline(SCREEN *sp)
+/* mouse report received in the keyboard stream -- parse its info */
+{
+ bool result = FALSE;
+ MEVENT *eventp = sp->_mouse_eventp;
+
+ TR(MY_TRACE, ("_nc_mouse_inline() called"));
+
+ if (sp->_mouse_type == M_XTERM) {
+ switch (sp->_mouse_format) {
+ case MF_X10:
+ result = decode_xterm_X10(sp, eventp);
+ break;
+ case MF_SGR1006:
+ result = decode_xterm_SGR1006(sp, eventp);
+ break;
+#ifdef EXP_XTERM_1005
+ case MF_XTERM_1005:
+ result = decode_xterm_1005(sp, eventp);
+ break;
+#endif
+ }
- eventp->x = (kbuf[1] - ' ') - 1;
- eventp->y = (kbuf[2] - ' ') - 1;
TR(MY_TRACE,
("_nc_mouse_inline: primitive mouse-event %s has slot %ld",
_nc_tracemouse(sp, eventp),
/* bump the next-free pointer into the circular list */
sp->_mouse_eventp = NEXT(eventp);
-#if 0 /* this return would be needed for QNX's mods to lib_getch.c */
- return (TRUE);
-#endif
+
+ if (!result) {
+ /* If this event is from a wheel-mouse, treat it like position
+ * reports and avoid waiting for the release-events which will
+ * never come.
+ */
+ if (eventp->bstate & BUTTON_PRESSED) {
+ int b;
+
+ for (b = 4; b <= MAX_BUTTONS; ++b) {
+ if ((eventp->bstate & MASK_PRESS(b))) {
+ result = TRUE;
+ break;
+ }
+ }
+ }
+ }
}
return (result);
static void
mouse_activate(SCREEN *sp, int on)
{
+ T((T_CALLED("mouse_activate(%p,%s)"),
+ (void *) SP_PARM, on ? "on" : "off"));
+
if (!on && !sp->_mouse_initialized)
- return;
+ returnVoid;
if (!_nc_mouse_init(sp))
- return;
+ returnVoid;
if (on) {
sp->_mouse_bstate = 0;
#if NCURSES_EXT_FUNCS
NCURSES_SP_NAME(keyok) (NCURSES_SP_ARGx KEY_MOUSE, on);
#endif
- TPUTS_TRACE("xterm mouse initialization");
enable_xterm_mouse(sp, 1);
break;
#if USE_GPM_SUPPORT
#endif
#ifdef USE_TERM_DRIVER
case M_TERM_DRIVER:
- sp->_mouse_active = TRUE;
+ enable_win32_mouse(sp, TRUE);
break;
#endif
case M_NONE:
- return;
+ returnVoid;
+ default:
+ T(("unexpected mouse mode"));
+ break;
}
/* Make runtime binding to cut down on object size of applications that
* do not use the mouse (e.g., 'clear').
*/
- sp->_mouse_event = _nc_mouse_event;
+ /* *INDENT-EQLS* */
+ sp->_mouse_event = _nc_mouse_event;
sp->_mouse_inline = _nc_mouse_inline;
- sp->_mouse_parse = _nc_mouse_parse;
+ sp->_mouse_parse = _nc_mouse_parse;
sp->_mouse_resume = _nc_mouse_resume;
- sp->_mouse_wrap = _nc_mouse_wrap;
+ sp->_mouse_wrap = _nc_mouse_wrap;
} else {
switch (sp->_mouse_type) {
case M_XTERM:
- TPUTS_TRACE("xterm mouse deinitialization");
enable_xterm_mouse(sp, 0);
break;
#if USE_GPM_SUPPORT
#endif
#ifdef USE_TERM_DRIVER
case M_TERM_DRIVER:
- sp->_mouse_active = FALSE;
+ enable_win32_mouse(sp, FALSE);
break;
#endif
case M_NONE:
- return;
+ returnVoid;
+ default:
+ T(("unexpected mouse mode"));
+ break;
}
}
NCURSES_SP_NAME(_nc_flush) (NCURSES_SP_ARG);
+ returnVoid;
}
/**************************************************************************
if (changed) {
merge = FALSE;
for (b = 1; b <= MAX_BUTTONS; ++b) {
- if ((sp->_mouse_mask & MASK_CLICK(b))
+ if ((sp->_mouse_mask2 & MASK_CLICK(b))
&& (ep->bstate & MASK_PRESS(b))) {
next->bstate &= ~MASK_RELEASE(b);
next->bstate |= MASK_CLICK(b);
&& (next->bstate & BUTTON_CLICKED)) {
merge = FALSE;
for (b = 1; b <= MAX_BUTTONS; ++b) {
- if ((sp->_mouse_mask & MASK_DOUBLE_CLICK(b))
+ if ((sp->_mouse_mask2 & MASK_DOUBLE_CLICK(b))
&& (ep->bstate & MASK_CLICK(b))
&& (next->bstate & MASK_CLICK(b))) {
next->bstate &= ~MASK_CLICK(b);
&& (next->bstate & BUTTON_CLICKED)) {
merge = FALSE;
for (b = 1; b <= MAX_BUTTONS; ++b) {
- if ((sp->_mouse_mask & MASK_TRIPLE_CLICK(b))
+ if ((sp->_mouse_mask2 & MASK_TRIPLE_CLICK(b))
&& (ep->bstate & MASK_DOUBLE_CLICK(b))
&& (next->bstate & MASK_CLICK(b))) {
next->bstate &= ~MASK_CLICK(b);
#endif /* TRACE */
/* after all this, do we have a valid event? */
- return ValidEvent(PREV(first_invalid));
+ ep = PREV(first_invalid);
+ return ValidEvent(ep) && ((ep->bstate & sp->_mouse_mask) != 0);
}
static void
NCURSES_SP_NAME(getmouse) (NCURSES_SP_DCLx MEVENT * aevent)
{
int result = ERR;
+ MEVENT *eventp;
T((T_CALLED("getmouse(%p,%p)"), (void *) SP_PARM, (void *) aevent));
- if ((aevent != 0) && (SP_PARM != 0) && (SP_PARM->_mouse_type != M_NONE)) {
- MEVENT *eventp = SP_PARM->_mouse_eventp;
+ if ((aevent != 0) &&
+ (SP_PARM != 0) &&
+ (SP_PARM->_mouse_type != M_NONE) &&
+ (eventp = SP_PARM->_mouse_eventp) != 0) {
/* compute the current-event pointer */
MEVENT *prev = PREV(eventp);
NCURSES_SP_NAME(ungetmouse) (NCURSES_SP_DCLx MEVENT * aevent)
{
int result = ERR;
+ MEVENT *eventp;
T((T_CALLED("ungetmouse(%p,%p)"), (void *) SP_PARM, (void *) aevent));
- if (aevent != 0 && SP_PARM != 0) {
- MEVENT *eventp = SP_PARM->_mouse_eventp;
+ if (aevent != 0 &&
+ SP_PARM != 0 &&
+ (eventp = SP_PARM->_mouse_eventp) != 0) {
/* stick the given event in the next-free slot */
*eventp = *aevent;
/* set the mouse event mask */
{
mmask_t result = 0;
- int b;
T((T_CALLED("mousemask(%p,%#lx,%p)"),
(void *) SP_PARM,
if (newmask || SP_PARM->_mouse_initialized) {
_nc_mouse_init(SP_PARM);
+
if (SP_PARM->_mouse_type != M_NONE) {
+ int b;
+
result = newmask &
(REPORT_MOUSE_POSITION
| BUTTON_ALT
if (win != 0) {
y -= win->_yoffset;
- result = ((win->_begy <= y &&
- win->_begx <= x &&
- (win->_begx + win->_maxx) >= x &&
- (win->_begy + win->_maxy) >= y) ? TRUE : FALSE);
+ if (IS_PAD(win)) {
+ if (win->_pad._pad_y >= 0 &&
+ win->_pad._pad_x >= 0 &&
+ win->_pad._pad_top >= 0 &&
+ win->_pad._pad_left >= 0 &&
+ win->_pad._pad_right >= 0 &&
+ win->_pad._pad_bottom >= 0) {
+ result = ((win->_pad._pad_top <= y &&
+ win->_pad._pad_left <= x &&
+ win->_pad._pad_right >= x &&
+ win->_pad._pad_bottom >= y) ? TRUE : FALSE);
+ }
+ } else {
+ result = ((win->_begy <= y &&
+ win->_begx <= x &&
+ (win->_begx + win->_maxx) >= x &&
+ (win->_begy + win->_maxy) >= y) ? TRUE : FALSE);
+ }
}
returnBool(result);
}
int y = *pY;
int x = *pX;
+ T(("transform input %d,%d", y, x));
if (to_screen) {
y += win->_begy + win->_yoffset;
x += win->_begx;
if (result) {
*pX = x;
*pY = y;
+ T(("output transform %d,%d", y, x));
}
}
returnBool(result);
projects / ncurses.git / blobdiff