--with-ncursesw use wide ncurses-libraries (installed)
--with-ncurses use ncurses-libraries (installed)
--with-pdcurses compile/link with pdcurses X11 library
- --with-x use the X Window System
--with-Xaw3d link with Xaw 3d library
--with-neXtaw link with neXT Athena library
--with-XawPlus link with Athena-Plus library
+ --with-pkg-config{=path} enable/disable use of pkg-config
+ --with-x use the X Window System
--with-ncurses-wrap-prefix naming-prefix for ncurses wrapped-variables
+EOF
+cat <<\EOF
EOF
exit 0 ;;
ac_n= ac_c='\c' ac_t=
fi
-# If we find X, set shell vars x_includes and x_libraries to the
-# paths, otherwise set no_x=yes.
-# Uses ac_ vars as temps to allow command line to override cache and checks.
-# --without-x overrides everything else, but does not touch the cache.
-echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:541: checking for X" >&5
-
-
-# Check whether --with-x or --without-x was given.
-if test "${with_x+set}" = set; then
- withval="$with_x"
- :
-fi
-
-# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
-if test "x$with_x" = xno; then
- # The user explicitly disabled X.
- have_x=disabled
-else
- if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
- # Both variables are already set.
- have_x=yes
- else
-if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- # One or both of the vars are not set, and there is no cached value.
-ac_x_includes=NO ac_x_libraries=NO
-rm -fr conftestdir
-if mkdir conftestdir; then
- cd conftestdir
- # Make sure to not put "make" in the Imakefile rules, since we grep it out.
- cat > Imakefile <<'EOF'
-acfindx:
- @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
-EOF
- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
- for ac_extension in a so sl; do
- if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
- test -f $ac_im_libdir/libX11.$ac_extension; then
- ac_im_usrlibdir=$ac_im_libdir; break
- fi
- done
- # Screen out bogus values from the imake configuration. They are
- # bogus both because they are the default anyway, and because
- # using them would break gcc on systems where it needs fixed includes.
- case "$ac_im_incroot" in
- /usr/include) ;;
- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
- esac
- case "$ac_im_usrlibdir" in
- /usr/lib | /lib) ;;
- *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
- esac
- fi
- cd ..
- rm -fr conftestdir
-fi
-
-if test "$ac_x_includes" = NO; then
- # Guess where to find include files, by looking for this one X11 .h file.
- test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
-
- # First, try using that file with no special directory specified.
-cat > conftest.$ac_ext <<EOF
-#line 604 "configure"
-#include "confdefs.h"
-#include <$x_direct_test_include>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:609: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- # We can compile using X headers with no special include directory.
-ac_x_includes=
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- # Look for the header file in a standard set of common directories.
-# Check X11 before X11Rn because it is often a symlink to the current release.
- for ac_dir in \
- /usr/X11/include \
- /usr/X11R6/include \
- /usr/X11R5/include \
- /usr/X11R4/include \
- \
- /usr/include/X11 \
- /usr/include/X11R6 \
- /usr/include/X11R5 \
- /usr/include/X11R4 \
- \
- /usr/local/X11/include \
- /usr/local/X11R6/include \
- /usr/local/X11R5/include \
- /usr/local/X11R4/include \
- \
- /usr/local/include/X11 \
- /usr/local/include/X11R6 \
- /usr/local/include/X11R5 \
- /usr/local/include/X11R4 \
- \
- /usr/X386/include \
- /usr/x386/include \
- /usr/XFree86/include/X11 \
- \
- /usr/include \
- /usr/local/include \
- /usr/unsupported/include \
- /usr/athena/include \
- /usr/local/x11r5/include \
- /usr/lpp/Xamples/include \
- \
- /usr/openwin/include \
- /usr/openwin/share/include \
- ; \
- do
- if test -r "$ac_dir/$x_direct_test_include"; then
- ac_x_includes=$ac_dir
- break
- fi
- done
-fi
-rm -f conftest*
-fi # $ac_x_includes = NO
-
-if test "$ac_x_libraries" = NO; then
- # Check for the libraries.
-
- test -z "$x_direct_test_library" && x_direct_test_library=Xt
- test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
-
- # See if we find them without any special options.
- # Don't add to $LIBS permanently.
- ac_save_LIBS="$LIBS"
- LIBS="-l$x_direct_test_library $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 678 "configure"
-#include "confdefs.h"
-
-int main() {
-${x_direct_test_function}()
-; return 0; }
-EOF
-if { (eval echo configure:685: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
-# We can link X programs with no special library path.
-ac_x_libraries=
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
-# First see if replacing the include by lib works.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
- /usr/X11/lib \
- /usr/X11R6/lib \
- /usr/X11R5/lib \
- /usr/X11R4/lib \
- \
- /usr/lib/X11 \
- /usr/lib/X11R6 \
- /usr/lib/X11R5 \
- /usr/lib/X11R4 \
- \
- /usr/local/X11/lib \
- /usr/local/X11R6/lib \
- /usr/local/X11R5/lib \
- /usr/local/X11R4/lib \
- \
- /usr/local/lib/X11 \
- /usr/local/lib/X11R6 \
- /usr/local/lib/X11R5 \
- /usr/local/lib/X11R4 \
- \
- /usr/X386/lib \
- /usr/x386/lib \
- /usr/XFree86/lib/X11 \
- \
- /usr/lib \
- /usr/local/lib \
- /usr/unsupported/lib \
- /usr/athena/lib \
- /usr/local/x11r5/lib \
- /usr/lpp/Xamples/lib \
- /lib/usr/lib/X11 \
- \
- /usr/openwin/lib \
- /usr/openwin/share/lib \
- ; \
-do
- for ac_extension in a so sl; do
- if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
- ac_x_libraries=$ac_dir
- break 2
- fi
- done
-done
-fi
-rm -f conftest*
-fi # $ac_x_libraries = NO
-
-if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
- # Didn't find X anywhere. Cache the known absence of X.
- ac_cv_have_x="have_x=no"
-else
- # Record where we found X for the cache.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
-fi
-fi
- fi
- eval "$ac_cv_have_x"
-fi # $with_x != no
-
-if test "$have_x" != yes; then
- echo "$ac_t""$have_x" 1>&6
- no_x=yes
-else
- # If each of the values was on the command line, it overrides each guess.
- test "x$x_includes" = xNONE && x_includes=$ac_x_includes
- test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
- # Update the cache value to reflect the command line values.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
- echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
-fi
-
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:808: checking host system type" >&5
+echo "configure:576: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:856: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:624: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:885: checking for $ac_word" >&5
+echo "configure:653: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:915: checking for $ac_word" >&5
+echo "configure:683: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:966: checking for $ac_word" >&5
+echo "configure:734: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:998: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:766: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1009 "configure"
+#line 777 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1014: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:782: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1040: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:808: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1045: checking whether we are using GNU C" >&5
+echo "configure:813: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1054: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:822: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1073: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:841: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1105: checking how to run the C preprocessor" >&5
+echo "configure:873: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1120 "configure"
+#line 888 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1126: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:894: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1137 "configure"
+#line 905 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1143: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:911: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1154 "configure"
+#line 922 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1160: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:928: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1189: checking for $ac_word" >&5
+echo "configure:957: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking if filesystem supports mixed-case filenames""... $ac_c" 1>&6
-echo "configure:1220: checking if filesystem supports mixed-case filenames" >&5
+echo "configure:988: checking if filesystem supports mixed-case filenames" >&5
if eval "test \"`echo '$''{'cf_cv_mixedcase'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1261: checking for $ac_word" >&5
+echo "configure:1029: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CTAGS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1295: checking for $ac_word" >&5
+echo "configure:1063: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_ETAGS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${CTAGS-ctags}", so it can be a program name with args.
set dummy ${CTAGS-ctags}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1328: checking for $ac_word" >&5
+echo "configure:1096: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKE_LOWER_TAGS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ETAGS-etags}", so it can be a program name with args.
set dummy ${ETAGS-etags}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1360: checking for $ac_word" >&5
+echo "configure:1128: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKE_UPPER_TAGS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cf_cv_libtype=
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:1442: checking for Cygwin environment" >&5
+echo "configure:1210: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1447 "configure"
+#line 1215 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:1458: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1226: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:1475: checking for mingw32 environment" >&5
+echo "configure:1243: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1480 "configure"
+#line 1248 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:1487: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1255: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1506: checking for executable suffix" >&5
+echo "configure:1274: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1516: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1284: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
ac_exeext=$EXEEXT
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1537: checking for object suffix" >&5
+echo "configure:1305: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1543: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1311: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
echo $ac_n "checking for ${CC-cc} option to accept ANSI C""... $ac_c" 1>&6
-echo "configure:1563: checking for ${CC-cc} option to accept ANSI C" >&5
+echo "configure:1331: checking for ${CC-cc} option to accept ANSI C" >&5
if eval "test \"`echo '$''{'cf_cv_ansi_cc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1669 "configure"
+#line 1437 "configure"
#include "confdefs.h"
#ifndef CC_HAS_PROTOS
struct s2 {int (*f) (double a);};
; return 0; }
EOF
-if { (eval echo configure:1685: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1453: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_ansi_cc="$cf_arg"; break
else
if test "$GCC" = yes
then
echo "checking for $CC __attribute__ directives" 1>&6
-echo "configure:1822: checking for $CC __attribute__ directives" >&5
+echo "configure:1590: checking for $CC __attribute__ directives" >&5
cat > conftest.$ac_ext <<EOF
-#line 1824 "${as_me-configure}"
+#line 1592 "${as_me-configure}"
#include "confdefs.h"
#include "conftest.h"
#include "conftest.i"
;;
esac
- if { (eval echo configure:1873: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if { (eval echo configure:1641: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
test -n "$verbose" && echo "$ac_t""... $cf_attribute" 1>&6
cat conftest.h >>confdefs.h
case $cf_attribute in #(vi
linux*|gnu*|mint*|k*bsd*-gnu) #(vi
echo $ac_n "checking if we must define _GNU_SOURCE""... $ac_c" 1>&6
-echo "configure:1944: checking if we must define _GNU_SOURCE" >&5
+echo "configure:1712: checking if we must define _GNU_SOURCE" >&5
if eval "test \"`echo '$''{'cf_cv_gnu_source'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1950 "configure"
+#line 1718 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:1960: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1728: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_gnu_source=no
else
cf_save="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS -D_GNU_SOURCE"
cat > conftest.$ac_ext <<EOF
-#line 1970 "configure"
+#line 1738 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:1980: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1748: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_gnu_source=no
else
;;
*)
echo $ac_n "checking if we should define _XOPEN_SOURCE""... $ac_c" 1>&6
-echo "configure:2027: checking if we should define _XOPEN_SOURCE" >&5
+echo "configure:1795: checking if we should define _XOPEN_SOURCE" >&5
if eval "test \"`echo '$''{'cf_cv_xopen_source'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2033 "configure"
+#line 1801 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:2043: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1811: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_xopen_source=no
else
cf_save="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS -D_XOPEN_SOURCE=$cf_XOPEN_SOURCE"
cat > conftest.$ac_ext <<EOF
-#line 2053 "configure"
+#line 1821 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:2063: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1831: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_xopen_source=no
else
echo $ac_n "checking if we should define _POSIX_C_SOURCE""... $ac_c" 1>&6
-echo "configure:2194: checking if we should define _POSIX_C_SOURCE" >&5
+echo "configure:1962: checking if we should define _POSIX_C_SOURCE" >&5
if eval "test \"`echo '$''{'cf_cv_posix_c_source'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
-echo "${as_me-configure}:2200: testing if the symbol is already defined go no further ..." 1>&5
+echo "${as_me-configure}:1968: testing if the symbol is already defined go no further ..." 1>&5
cat > conftest.$ac_ext <<EOF
-#line 2203 "configure"
+#line 1971 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:2213: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1981: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_posix_c_source=no
else
esac
if test "$cf_want_posix_source" = yes ; then
cat > conftest.$ac_ext <<EOF
-#line 2235 "configure"
+#line 2003 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:2245: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2013: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
rm -f conftest*
fi
-echo "${as_me-configure}:2256: testing ifdef from value $cf_POSIX_C_SOURCE ..." 1>&5
+echo "${as_me-configure}:2024: testing ifdef from value $cf_POSIX_C_SOURCE ..." 1>&5
CFLAGS="$cf_trim_CFLAGS"
CPPFLAGS="$cf_trim_CPPFLAGS $cf_cv_posix_c_source"
-echo "${as_me-configure}:2261: testing if the second compile does not leave our definition intact error ..." 1>&5
+echo "${as_me-configure}:2029: testing if the second compile does not leave our definition intact error ..." 1>&5
cat > conftest.$ac_ext <<EOF
-#line 2264 "configure"
+#line 2032 "configure"
#include "confdefs.h"
#include <sys/types.h>
int main() {
#endif
; return 0; }
EOF
-if { (eval echo configure:2274: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2042: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:2470: checking for working const" >&5
+echo "configure:2238: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2475 "configure"
+#line 2243 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2524: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2292: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
echo $ac_n "checking for signal global datatype""... $ac_c" 1>&6
-echo "configure:2546: checking for signal global datatype" >&5
+echo "configure:2314: checking for signal global datatype" >&5
if eval "test \"`echo '$''{'cf_cv_sig_atomic_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
"int"
do
cat > conftest.$ac_ext <<EOF
-#line 2557 "configure"
+#line 2325 "configure"
#include "confdefs.h"
#include <sys/types.h>
x = 1
; return 0; }
EOF
-if { (eval echo configure:2575: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2343: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_sig_atomic_t=$cf_type
else
echo $ac_n "checking if you want to see long compiling messages""... $ac_c" 1>&6
-echo "configure:2599: checking if you want to see long compiling messages" >&5
+echo "configure:2367: checking if you want to see long compiling messages" >&5
# Check whether --enable-echo or --disable-echo was given.
if test "${enable_echo+set}" = set; then
GCC_VERSION=none
if test "$GCC" = yes ; then
echo $ac_n "checking version of $CC""... $ac_c" 1>&6
-echo "configure:2646: checking version of $CC" >&5
+echo "configure:2414: checking version of $CC" >&5
GCC_VERSION="`${CC} --version 2>/dev/null | sed -e '2,$d' -e 's/^.*(GCC) //' -e 's/^[^0-9.]*//' -e 's/[^0-9.].*//'`"
test -z "$GCC_VERSION" && GCC_VERSION=unknown
echo "$ac_t""$GCC_VERSION" 1>&6
if ( test "$GCC" = yes || test "$GXX" = yes )
then
echo $ac_n "checking if you want to turn on gcc warnings""... $ac_c" 1>&6
-echo "configure:2656: checking if you want to turn on gcc warnings" >&5
+echo "configure:2424: checking if you want to turn on gcc warnings" >&5
# Check whether --enable-warnings or --disable-warnings was given.
if test "${enable_warnings+set}" = set; then
if test "$GCC" = yes
then
echo "checking for $CC __attribute__ directives" 1>&6
-echo "configure:2696: checking for $CC __attribute__ directives" >&5
+echo "configure:2464: checking for $CC __attribute__ directives" >&5
cat > conftest.$ac_ext <<EOF
-#line 2698 "${as_me-configure}"
+#line 2466 "${as_me-configure}"
#include "confdefs.h"
#include "conftest.h"
#include "conftest.i"
;;
esac
- if { (eval echo configure:2747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if { (eval echo configure:2515: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
test -n "$verbose" && echo "$ac_t""... $cf_attribute" 1>&6
cat conftest.h >>confdefs.h
case $cf_attribute in #(vi
case $host_os in
linux*|gnu*)
echo $ac_n "checking if this is really Intel C compiler""... $ac_c" 1>&6
-echo "configure:2791: checking if this is really Intel C compiler" >&5
+echo "configure:2559: checking if this is really Intel C compiler" >&5
cf_save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -no-gcc"
cat > conftest.$ac_ext <<EOF
-#line 2795 "configure"
+#line 2563 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2807: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2575: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
INTEL_COMPILER=yes
cf_save_CFLAGS="$cf_save_CFLAGS -we147 -no-gcc"
cat > conftest.$ac_ext <<EOF
-#line 2825 "${as_me-configure}"
+#line 2593 "${as_me-configure}"
int main(int argc, char *argv[]) { return (argv[argc-1] == 0) ; }
EOF
# warning #279: controlling expression is constant
echo "checking for $CC warning options" 1>&6
-echo "configure:2843: checking for $CC warning options" >&5
+echo "configure:2611: checking for $CC warning options" >&5
cf_save_CFLAGS="$CFLAGS"
EXTRA_CFLAGS="-Wall"
for cf_opt in \
wd981
do
CFLAGS="$cf_save_CFLAGS $EXTRA_CFLAGS -$cf_opt"
- if { (eval echo configure:2858: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if { (eval echo configure:2626: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
test -n "$verbose" && echo "$ac_t""... -$cf_opt" 1>&6
EXTRA_CFLAGS="$EXTRA_CFLAGS -$cf_opt"
fi
elif test "$GCC" = yes
then
echo "checking for $CC warning options" 1>&6
-echo "configure:2868: checking for $CC warning options" >&5
+echo "configure:2636: checking for $CC warning options" >&5
cf_save_CFLAGS="$CFLAGS"
EXTRA_CFLAGS=
cf_warn_CONST=""
Wundef $cf_warn_CONST
do
CFLAGS="$cf_save_CFLAGS $EXTRA_CFLAGS -$cf_opt"
- if { (eval echo configure:2887: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if { (eval echo configure:2655: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
test -n "$verbose" && echo "$ac_t""... -$cf_opt" 1>&6
case $cf_opt in #(vi
Wcast-qual) #(vi
[34].*)
test -n "$verbose" && echo " feature is broken in gcc $GCC_VERSION" 1>&6
-echo "${as_me-configure}:2898: testing feature is broken in gcc $GCC_VERSION ..." 1>&5
+echo "${as_me-configure}:2666: testing feature is broken in gcc $GCC_VERSION ..." 1>&5
continue;;
echo $ac_n "checking for extra include directories""... $ac_c" 1>&6
-echo "configure:3003: checking for extra include directories" >&5
+echo "configure:2771: checking for extra include directories" >&5
if eval "test \"`echo '$''{'cf_cv_curses_incdir'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking if we have identified curses headers""... $ac_c" 1>&6
-echo "configure:3028: checking if we have identified curses headers" >&5
+echo "configure:2796: checking if we have identified curses headers" >&5
if eval "test \"`echo '$''{'cf_cv_ncurses_header'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ncurses.h ncurses/curses.h ncurses/ncurses.h
do
cat > conftest.$ac_ext <<EOF
-#line 3039 "configure"
+#line 2807 "configure"
#include "confdefs.h"
#include <${cf_header}>
int main() {
initscr(); tgoto("?", 0,0)
; return 0; }
EOF
-if { (eval echo configure:3046: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2814: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_ncurses_header=$cf_header; break
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3069: checking for $ac_hdr" >&5
+echo "configure:2837: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3074 "configure"
+#line 2842 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3079: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2847: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for terminfo header""... $ac_c" 1>&6
-echo "configure:3108: checking for terminfo header" >&5
+echo "configure:2876: checking for terminfo header" >&5
if eval "test \"`echo '$''{'cf_cv_term_header'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for cf_test in $cf_term_header "ncurses/term.h" "ncursesw/term.h"
do
cat > conftest.$ac_ext <<EOF
-#line 3125 "configure"
+#line 2893 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <${cf_cv_ncurses_header-curses.h}>
int x = auto_left_margin
; return 0; }
EOF
-if { (eval echo configure:3135: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2903: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_term_header="$cf_test"
echo $ac_n "checking for ncurses version""... $ac_c" 1>&6
-echo "configure:3184: checking for ncurses version" >&5
+echo "configure:2952: checking for ncurses version" >&5
if eval "test \"`echo '$''{'cf_cv_ncurses_version'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
#endif
EOF
cf_try="$ac_cpp conftest.$ac_ext 2>&5 | grep '^Autoconf ' >conftest.out"
- { (eval echo configure:3210: \"$cf_try\") 1>&5; (eval $cf_try) 2>&5; }
+ { (eval echo configure:2978: \"$cf_try\") 1>&5; (eval $cf_try) 2>&5; }
if test -f conftest.out ; then
cf_out=`cat conftest.out | sed -e 's%^Autoconf %%' -e 's%^[^"]*"%%' -e 's%".*%%'`
test -n "$cf_out" && cf_cv_ncurses_version="$cf_out"
else
cat > conftest.$ac_ext <<EOF
-#line 3219 "configure"
+#line 2987 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
${cf_cv_main_return-return}(0);
}
EOF
-if { (eval echo configure:3243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
cf_cv_ncurses_version=`cat $cf_tempfile`
echo $ac_n "checking if we have identified curses libraries""... $ac_c" 1>&6
-echo "configure:3267: checking if we have identified curses libraries" >&5
+echo "configure:3035: checking if we have identified curses libraries" >&5
cat > conftest.$ac_ext <<EOF
-#line 3269 "configure"
+#line 3037 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
int main() {
initscr(); tgoto("?", 0,0)
; return 0; }
EOF
-if { (eval echo configure:3276: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3044: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_result=yes
else
case $host_os in #(vi
freebsd*) #(vi
echo $ac_n "checking for tgoto in -lmytinfo""... $ac_c" 1>&6
-echo "configure:3292: checking for tgoto in -lmytinfo" >&5
+echo "configure:3060: checking for tgoto in -lmytinfo" >&5
ac_lib_var=`echo mytinfo'_'tgoto | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmytinfo $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3300 "configure"
+#line 3068 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgoto()
; return 0; }
EOF
-if { (eval echo configure:3311: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
;;
hpux10.*) #(vi
echo $ac_n "checking for initscr in -lcur_colr""... $ac_c" 1>&6
-echo "configure:3334: checking for initscr in -lcur_colr" >&5
+echo "configure:3102: checking for initscr in -lcur_colr" >&5
ac_lib_var=`echo cur_colr'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcur_colr $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3342 "configure"
+#line 3110 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
initscr()
; return 0; }
EOF
-if { (eval echo configure:3353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3121: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for initscr in -lHcurses""... $ac_c" 1>&6
-echo "configure:3376: checking for initscr in -lHcurses" >&5
+echo "configure:3144: checking for initscr in -lHcurses" >&5
ac_lib_var=`echo Hcurses'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lHcurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3384 "configure"
+#line 3152 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
initscr()
; return 0; }
EOF
-if { (eval echo configure:3395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3163: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$cf_have_libdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6
-echo "${as_me-configure}:3444: testing adding $cf_add_libdir to library-path ..." 1>&5
+echo "${as_me-configure}:3212: testing adding $cf_add_libdir to library-path ..." 1>&5
LDFLAGS="-L$cf_add_libdir $LDFLAGS"
if test "$cf_have_libdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6
-echo "${as_me-configure}:3476: testing adding $cf_add_libdir to library-path ..." 1>&5
+echo "${as_me-configure}:3244: testing adding $cf_add_libdir to library-path ..." 1>&5
LDFLAGS="-L$cf_add_libdir $LDFLAGS"
# Check for library containing tgoto. Do this before curses library
# because it may be needed to link the test-case for initscr.
echo $ac_n "checking for tgoto""... $ac_c" 1>&6
-echo "configure:3506: checking for tgoto" >&5
+echo "configure:3274: checking for tgoto" >&5
if eval "test \"`echo '$''{'ac_cv_func_tgoto'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3511 "configure"
+#line 3279 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char tgoto(); below. */
; return 0; }
EOF
-if { (eval echo configure:3534: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_tgoto=yes"
else
for cf_term_lib in $cf_check_list termcap termlib unknown
do
echo $ac_n "checking for tgoto in -l$cf_term_lib""... $ac_c" 1>&6
-echo "configure:3555: checking for tgoto in -l$cf_term_lib" >&5
+echo "configure:3323: checking for tgoto in -l$cf_term_lib" >&5
ac_lib_var=`echo $cf_term_lib'_'tgoto | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$cf_term_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3563 "configure"
+#line 3331 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgoto()
; return 0; }
EOF
-if { (eval echo configure:3574: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3342: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for cf_curs_lib in $cf_check_list xcurses jcurses pdcurses unknown
do
echo $ac_n "checking for initscr in -l$cf_curs_lib""... $ac_c" 1>&6
-echo "configure:3604: checking for initscr in -l$cf_curs_lib" >&5
+echo "configure:3372: checking for initscr in -l$cf_curs_lib" >&5
ac_lib_var=`echo $cf_curs_lib'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-l$cf_curs_lib $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3612 "configure"
+#line 3380 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
initscr()
; return 0; }
EOF
-if { (eval echo configure:3623: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3391: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
LIBS="-l$cf_curs_lib $cf_save_LIBS"
if test "$cf_term_lib" = unknown ; then
echo $ac_n "checking if we can link with $cf_curs_lib library""... $ac_c" 1>&6
-echo "configure:3649: checking if we can link with $cf_curs_lib library" >&5
+echo "configure:3417: checking if we can link with $cf_curs_lib library" >&5
cat > conftest.$ac_ext <<EOF
-#line 3651 "configure"
+#line 3419 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
int main() {
initscr()
; return 0; }
EOF
-if { (eval echo configure:3658: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_result=yes
else
:
elif test "$cf_term_lib" != predefined ; then
echo $ac_n "checking if we need both $cf_curs_lib and $cf_term_lib libraries""... $ac_c" 1>&6
-echo "configure:3674: checking if we need both $cf_curs_lib and $cf_term_lib libraries" >&5
+echo "configure:3442: checking if we need both $cf_curs_lib and $cf_term_lib libraries" >&5
cat > conftest.$ac_ext <<EOF
-#line 3676 "configure"
+#line 3444 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
int main() {
initscr(); tgoto((char *)0, 0, 0);
; return 0; }
EOF
-if { (eval echo configure:3683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_result=no
else
LIBS="-l$cf_curs_lib -l$cf_term_lib $cf_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3693 "configure"
+#line 3461 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
int main() {
initscr()
; return 0; }
EOF
-if { (eval echo configure:3700: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_result=yes
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3731: checking for $ac_word" >&5
+echo "configure:3499: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_NCURSES_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# even with config script, some packages use no-override for curses.h
echo $ac_n "checking if we have identified curses headers""... $ac_c" 1>&6
-echo "configure:3776: checking if we have identified curses headers" >&5
+echo "configure:3544: checking if we have identified curses headers" >&5
if eval "test \"`echo '$''{'cf_cv_ncurses_header'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ncurses.h
do
cat > conftest.$ac_ext <<EOF
-#line 3789 "configure"
+#line 3557 "configure"
#include "confdefs.h"
#include <${cf_header}>
int main() {
initscr(); tgoto("?", 0,0)
; return 0; }
EOF
-if { (eval echo configure:3796: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3564: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_ncurses_header=$cf_header; break
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3819: checking for $ac_hdr" >&5
+echo "configure:3587: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3824 "configure"
+#line 3592 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3597: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
cf_save_CPPFLAGS=$CPPFLAGS
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
cat > conftest.$ac_ext <<EOF
-#line 3905 "configure"
+#line 3673 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
printf("Hello")
; return 0; }
EOF
-if { (eval echo configure:3912: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3680: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
if test "$cf_have_incdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6
-echo "${as_me-configure}:3929: testing adding $cf_add_incdir to include-path ..." 1>&5
+echo "${as_me-configure}:3697: testing adding $cf_add_incdir to include-path ..." 1>&5
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
}
echo $ac_n "checking for $cf_ncuhdr_root header in include-path""... $ac_c" 1>&6
-echo "configure:3948: checking for $cf_ncuhdr_root header in include-path" >&5
+echo "configure:3716: checking for $cf_ncuhdr_root header in include-path" >&5
if eval "test \"`echo '$''{'cf_cv_ncurses_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
cat > conftest.$ac_ext <<EOF
-#line 3959 "configure"
+#line 3727 "configure"
#include "confdefs.h"
; return 0; }
EOF
-if { (eval echo configure:3980: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3748: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_ncurses_h=$cf_header
else
echo $ac_n "checking for $cf_ncuhdr_root include-path""... $ac_c" 1>&6
-echo "configure:4006: checking for $cf_ncuhdr_root include-path" >&5
+echo "configure:3774: checking for $cf_ncuhdr_root include-path" >&5
if eval "test \"`echo '$''{'cf_cv_ncurses_h2'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cf_save_CPPFLAGS=$CPPFLAGS
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
cat > conftest.$ac_ext <<EOF
-#line 4152 "configure"
+#line 3920 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
printf("Hello")
; return 0; }
EOF
-if { (eval echo configure:4159: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3927: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
if test "$cf_have_incdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6
-echo "${as_me-configure}:4176: testing adding $cf_add_incdir to include-path ..." 1>&5
+echo "${as_me-configure}:3944: testing adding $cf_add_incdir to include-path ..." 1>&5
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
do
cat > conftest.$ac_ext <<EOF
-#line 4198 "configure"
+#line 3966 "configure"
#include "confdefs.h"
; return 0; }
EOF
-if { (eval echo configure:4219: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3987: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_ncurses_h2=$cf_header
cf_save_CPPFLAGS=$CPPFLAGS
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
cat > conftest.$ac_ext <<EOF
-#line 4277 "configure"
+#line 4045 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
printf("Hello")
; return 0; }
EOF
-if { (eval echo configure:4284: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4052: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
if test "$cf_have_incdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6
-echo "${as_me-configure}:4301: testing adding $cf_add_incdir to include-path ..." 1>&5
+echo "${as_me-configure}:4069: testing adding $cf_add_incdir to include-path ..." 1>&5
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
echo $ac_n "checking for terminfo header""... $ac_c" 1>&6
-echo "configure:4349: checking for terminfo header" >&5
+echo "configure:4117: checking for terminfo header" >&5
if eval "test \"`echo '$''{'cf_cv_term_header'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for cf_test in $cf_term_header "ncurses/term.h" "ncursesw/term.h"
do
cat > conftest.$ac_ext <<EOF
-#line 4366 "configure"
+#line 4134 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <${cf_cv_ncurses_header-curses.h}>
int x = auto_left_margin
; return 0; }
EOF
-if { (eval echo configure:4376: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4144: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_term_header="$cf_test"
echo $ac_n "checking for ncurses version""... $ac_c" 1>&6
-echo "configure:4431: checking for ncurses version" >&5
+echo "configure:4199: checking for ncurses version" >&5
if eval "test \"`echo '$''{'cf_cv_ncurses_version'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
#endif
EOF
cf_try="$ac_cpp conftest.$ac_ext 2>&5 | grep '^Autoconf ' >conftest.out"
- { (eval echo configure:4457: \"$cf_try\") 1>&5; (eval $cf_try) 2>&5; }
+ { (eval echo configure:4225: \"$cf_try\") 1>&5; (eval $cf_try) 2>&5; }
if test -f conftest.out ; then
cf_out=`cat conftest.out | sed -e 's%^Autoconf %%' -e 's%^[^"]*"%%' -e 's%".*%%'`
test -n "$cf_out" && cf_cv_ncurses_version="$cf_out"
else
cat > conftest.$ac_ext <<EOF
-#line 4466 "configure"
+#line 4234 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
${cf_cv_main_return-return}(0);
}
EOF
-if { (eval echo configure:4490: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
cf_cv_ncurses_version=`cat $cf_tempfile`
cf_ncurses_LIBS=""
cf_ncurses_SAVE="$LIBS"
echo $ac_n "checking for Gpm_Open in -lgpm""... $ac_c" 1>&6
-echo "configure:4521: checking for Gpm_Open in -lgpm" >&5
+echo "configure:4289: checking for Gpm_Open in -lgpm" >&5
ac_lib_var=`echo gpm'_'Gpm_Open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgpm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4529 "configure"
+#line 4297 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
Gpm_Open()
; return 0; }
EOF
-if { (eval echo configure:4540: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4308: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for initscr in -lgpm""... $ac_c" 1>&6
-echo "configure:4556: checking for initscr in -lgpm" >&5
+echo "configure:4324: checking for initscr in -lgpm" >&5
ac_lib_var=`echo gpm'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgpm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4564 "configure"
+#line 4332 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
initscr()
; return 0; }
EOF
-if { (eval echo configure:4575: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# version of ncurses (but it should do no harm, since it's static).
if test "$cf_nculib_root" = ncurses ; then
echo $ac_n "checking for tgoto in -lmytinfo""... $ac_c" 1>&6
-echo "configure:4607: checking for tgoto in -lmytinfo" >&5
+echo "configure:4375: checking for tgoto in -lmytinfo" >&5
ac_lib_var=`echo mytinfo'_'tgoto | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmytinfo $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4615 "configure"
+#line 4383 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgoto()
; return 0; }
EOF
-if { (eval echo configure:4626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$cf_have_libdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6
-echo "${as_me-configure}:4674: testing adding $cf_add_libdir to library-path ..." 1>&5
+echo "${as_me-configure}:4442: testing adding $cf_add_libdir to library-path ..." 1>&5
LDFLAGS="-L$cf_add_libdir $LDFLAGS"
eval 'cf_cv_have_lib_'$cf_nculib_root'=no'
cf_libdir=""
echo $ac_n "checking for initscr""... $ac_c" 1>&6
-echo "configure:4689: checking for initscr" >&5
+echo "configure:4457: checking for initscr" >&5
if eval "test \"`echo '$''{'ac_cv_func_initscr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4694 "configure"
+#line 4462 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char initscr(); below. */
; return 0; }
EOF
-if { (eval echo configure:4717: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4485: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_initscr=yes"
else
cf_save_LIBS="$LIBS"
echo $ac_n "checking for initscr in -l$cf_nculib_root""... $ac_c" 1>&6
-echo "configure:4737: checking for initscr in -l$cf_nculib_root" >&5
+echo "configure:4505: checking for initscr in -l$cf_nculib_root" >&5
LIBS="-l$cf_nculib_root $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4740 "configure"
+#line 4508 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
int main() {
initscr()
; return 0; }
EOF
-if { (eval echo configure:4747: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
eval 'cf_cv_have_lib_'$cf_nculib_root'=yes'
for cf_libdir in $cf_search
do
echo $ac_n "checking for -l$cf_nculib_root in $cf_libdir""... $ac_c" 1>&6
-echo "configure:4854: checking for -l$cf_nculib_root in $cf_libdir" >&5
+echo "configure:4622: checking for -l$cf_nculib_root in $cf_libdir" >&5
LIBS="-L$cf_libdir -l$cf_nculib_root $cf_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4857 "configure"
+#line 4625 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
int main() {
initscr()
; return 0; }
EOF
-if { (eval echo configure:4864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4632: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
eval 'cf_cv_have_lib_'$cf_nculib_root'=yes'
if test -n "$cf_ncurses_LIBS" ; then
echo $ac_n "checking if we can link $cf_nculib_root without $cf_ncurses_LIBS""... $ac_c" 1>&6
-echo "configure:4895: checking if we can link $cf_nculib_root without $cf_ncurses_LIBS" >&5
+echo "configure:4663: checking if we can link $cf_nculib_root without $cf_ncurses_LIBS" >&5
cf_ncurses_SAVE="$LIBS"
for p in $cf_ncurses_LIBS ; do
q=`echo $LIBS | sed -e "s%$p %%" -e "s%$p$%%"`
fi
done
cat > conftest.$ac_ext <<EOF
-#line 4904 "configure"
+#line 4672 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
int main() {
initscr(); mousemask(0,0); tgoto((char *)0, 0, 0);
; return 0; }
EOF
-if { (eval echo configure:4911: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
cf_cv_libtype=w
echo $ac_n "checking for multibyte character support""... $ac_c" 1>&6
-echo "configure:4940: checking for multibyte character support" >&5
+echo "configure:4708: checking for multibyte character support" >&5
if eval "test \"`echo '$''{'cf_cv_utf8_lib'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cf_save_LIBS="$LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4947 "configure"
+#line 4715 "configure"
#include "confdefs.h"
#include <stdlib.h>
putwc(0,0);
; return 0; }
EOF
-if { (eval echo configure:4955: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4723: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_cv_utf8_lib=yes
else
cf_cv_library_path_utf8=
-echo "${as_me-configure}:4970: testing Starting FIND_LINKAGE(utf8,) ..." 1>&5
+echo "${as_me-configure}:4738: testing Starting FIND_LINKAGE(utf8,) ..." 1>&5
cf_save_LIBS="$LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4976 "configure"
+#line 4744 "configure"
#include "confdefs.h"
#include <libutf8.h>
putwc(0,0);
; return 0; }
EOF
-if { (eval echo configure:4984: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_cv_find_linkage_utf8=yes
LIBS="-lutf8 $cf_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5000 "configure"
+#line 4768 "configure"
#include "confdefs.h"
#include <libutf8.h>
putwc(0,0);
; return 0; }
EOF
-if { (eval echo configure:5008: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4776: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_cv_find_linkage_utf8=yes
test -n "$verbose" && echo " find linkage for utf8 library" 1>&6
-echo "${as_me-configure}:5026: testing find linkage for utf8 library ..." 1>&5
+echo "${as_me-configure}:4794: testing find linkage for utf8 library ..." 1>&5
-echo "${as_me-configure}:5030: testing Searching for headers in FIND_LINKAGE(utf8,) ..." 1>&5
+echo "${as_me-configure}:4798: testing Searching for headers in FIND_LINKAGE(utf8,) ..." 1>&5
cf_save_CPPFLAGS="$CPPFLAGS"
if test -d $cf_cv_header_path_utf8 ; then
test -n "$verbose" && echo " ... testing $cf_cv_header_path_utf8" 1>&6
-echo "${as_me-configure}:5152: testing ... testing $cf_cv_header_path_utf8 ..." 1>&5
+echo "${as_me-configure}:4920: testing ... testing $cf_cv_header_path_utf8 ..." 1>&5
CPPFLAGS="$cf_save_CPPFLAGS -I$cf_cv_header_path_utf8"
cat > conftest.$ac_ext <<EOF
-#line 5157 "configure"
+#line 4925 "configure"
#include "confdefs.h"
#include <libutf8.h>
putwc(0,0);
; return 0; }
EOF
-if { (eval echo configure:5165: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4933: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
test -n "$verbose" && echo " ... found utf8 headers in $cf_cv_header_path_utf8" 1>&6
-echo "${as_me-configure}:5170: testing ... found utf8 headers in $cf_cv_header_path_utf8 ..." 1>&5
+echo "${as_me-configure}:4938: testing ... found utf8 headers in $cf_cv_header_path_utf8 ..." 1>&5
cf_cv_find_linkage_utf8=maybe
if test "$cf_cv_find_linkage_utf8" = maybe ; then
-echo "${as_me-configure}:5191: testing Searching for utf8 library in FIND_LINKAGE(utf8,) ..." 1>&5
+echo "${as_me-configure}:4959: testing Searching for utf8 library in FIND_LINKAGE(utf8,) ..." 1>&5
cf_save_LIBS="$LIBS"
if test -d $cf_cv_library_path_utf8 ; then
test -n "$verbose" && echo " ... testing $cf_cv_library_path_utf8" 1>&6
-echo "${as_me-configure}:5299: testing ... testing $cf_cv_library_path_utf8 ..." 1>&5
+echo "${as_me-configure}:5067: testing ... testing $cf_cv_library_path_utf8 ..." 1>&5
CPPFLAGS="$cf_test_CPPFLAGS"
LIBS="-lutf8 $cf_save_LIBS"
LDFLAGS="$cf_save_LDFLAGS -L$cf_cv_library_path_utf8"
cat > conftest.$ac_ext <<EOF
-#line 5306 "configure"
+#line 5074 "configure"
#include "confdefs.h"
#include <libutf8.h>
putwc(0,0);
; return 0; }
EOF
-if { (eval echo configure:5314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5082: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
test -n "$verbose" && echo " ... found utf8 library in $cf_cv_library_path_utf8" 1>&6
-echo "${as_me-configure}:5319: testing ... found utf8 library in $cf_cv_library_path_utf8 ..." 1>&5
+echo "${as_me-configure}:5087: testing ... found utf8 library in $cf_cv_library_path_utf8 ..." 1>&5
cf_cv_find_linkage_utf8=yes
cf_save_CPPFLAGS=$CPPFLAGS
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
cat > conftest.$ac_ext <<EOF
-#line 5399 "configure"
+#line 5167 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
printf("Hello")
; return 0; }
EOF
-if { (eval echo configure:5406: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5174: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
if test "$cf_have_incdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6
-echo "${as_me-configure}:5423: testing adding $cf_add_incdir to include-path ..." 1>&5
+echo "${as_me-configure}:5191: testing adding $cf_add_incdir to include-path ..." 1>&5
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
if test "$cf_have_libdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6
-echo "${as_me-configure}:5459: testing adding $cf_add_libdir to library-path ..." 1>&5
+echo "${as_me-configure}:5227: testing adding $cf_add_libdir to library-path ..." 1>&5
LDFLAGS="-L$cf_add_libdir $LDFLAGS"
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5480: checking for $ac_word" >&5
+echo "configure:5248: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_NCURSES_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# even with config script, some packages use no-override for curses.h
echo $ac_n "checking if we have identified curses headers""... $ac_c" 1>&6
-echo "configure:5525: checking if we have identified curses headers" >&5
+echo "configure:5293: checking if we have identified curses headers" >&5
if eval "test \"`echo '$''{'cf_cv_ncurses_header'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ncurses.h
do
cat > conftest.$ac_ext <<EOF
-#line 5538 "configure"
+#line 5306 "configure"
#include "confdefs.h"
#include <${cf_header}>
int main() {
initscr(); tgoto("?", 0,0)
; return 0; }
EOF
-if { (eval echo configure:5545: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5313: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_ncurses_header=$cf_header; break
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5568: checking for $ac_hdr" >&5
+echo "configure:5336: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5573 "configure"
+#line 5341 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5578: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5346: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
cf_save_CPPFLAGS=$CPPFLAGS
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
cat > conftest.$ac_ext <<EOF
-#line 5654 "configure"
+#line 5422 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
printf("Hello")
; return 0; }
EOF
-if { (eval echo configure:5661: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5429: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
if test "$cf_have_incdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6
-echo "${as_me-configure}:5678: testing adding $cf_add_incdir to include-path ..." 1>&5
+echo "${as_me-configure}:5446: testing adding $cf_add_incdir to include-path ..." 1>&5
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
}
echo $ac_n "checking for $cf_ncuhdr_root header in include-path""... $ac_c" 1>&6
-echo "configure:5697: checking for $cf_ncuhdr_root header in include-path" >&5
+echo "configure:5465: checking for $cf_ncuhdr_root header in include-path" >&5
if eval "test \"`echo '$''{'cf_cv_ncurses_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
do
cat > conftest.$ac_ext <<EOF
-#line 5708 "configure"
+#line 5476 "configure"
#include "confdefs.h"
; return 0; }
EOF
-if { (eval echo configure:5737: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5505: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_ncurses_h=$cf_header
else
echo $ac_n "checking for $cf_ncuhdr_root include-path""... $ac_c" 1>&6
-echo "configure:5763: checking for $cf_ncuhdr_root include-path" >&5
+echo "configure:5531: checking for $cf_ncuhdr_root include-path" >&5
if eval "test \"`echo '$''{'cf_cv_ncurses_h2'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cf_save_CPPFLAGS=$CPPFLAGS
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
cat > conftest.$ac_ext <<EOF
-#line 5909 "configure"
+#line 5677 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
printf("Hello")
; return 0; }
EOF
-if { (eval echo configure:5916: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5684: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
if test "$cf_have_incdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6
-echo "${as_me-configure}:5933: testing adding $cf_add_incdir to include-path ..." 1>&5
+echo "${as_me-configure}:5701: testing adding $cf_add_incdir to include-path ..." 1>&5
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
do
cat > conftest.$ac_ext <<EOF
-#line 5955 "configure"
+#line 5723 "configure"
#include "confdefs.h"
; return 0; }
EOF
-if { (eval echo configure:5976: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5744: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_ncurses_h2=$cf_header
cf_save_CPPFLAGS=$CPPFLAGS
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
cat > conftest.$ac_ext <<EOF
-#line 6034 "configure"
+#line 5802 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
printf("Hello")
; return 0; }
EOF
-if { (eval echo configure:6041: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5809: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
:
else
echo "configure: failed program was:" >&5
if test "$cf_have_incdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_incdir to include-path" 1>&6
-echo "${as_me-configure}:6058: testing adding $cf_add_incdir to include-path ..." 1>&5
+echo "${as_me-configure}:5826: testing adding $cf_add_incdir to include-path ..." 1>&5
CPPFLAGS="$CPPFLAGS -I$cf_add_incdir"
echo $ac_n "checking for terminfo header""... $ac_c" 1>&6
-echo "configure:6106: checking for terminfo header" >&5
+echo "configure:5874: checking for terminfo header" >&5
if eval "test \"`echo '$''{'cf_cv_term_header'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for cf_test in $cf_term_header "ncurses/term.h" "ncursesw/term.h"
do
cat > conftest.$ac_ext <<EOF
-#line 6123 "configure"
+#line 5891 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <${cf_cv_ncurses_header-curses.h}>
int x = auto_left_margin
; return 0; }
EOF
-if { (eval echo configure:6133: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5901: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_term_header="$cf_test"
echo $ac_n "checking for ncurses version""... $ac_c" 1>&6
-echo "configure:6188: checking for ncurses version" >&5
+echo "configure:5956: checking for ncurses version" >&5
if eval "test \"`echo '$''{'cf_cv_ncurses_version'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
#endif
EOF
cf_try="$ac_cpp conftest.$ac_ext 2>&5 | grep '^Autoconf ' >conftest.out"
- { (eval echo configure:6214: \"$cf_try\") 1>&5; (eval $cf_try) 2>&5; }
+ { (eval echo configure:5982: \"$cf_try\") 1>&5; (eval $cf_try) 2>&5; }
if test -f conftest.out ; then
cf_out=`cat conftest.out | sed -e 's%^Autoconf %%' -e 's%^[^"]*"%%' -e 's%".*%%'`
test -n "$cf_out" && cf_cv_ncurses_version="$cf_out"
else
cat > conftest.$ac_ext <<EOF
-#line 6223 "configure"
+#line 5991 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
${cf_cv_main_return-return}(0);
}
EOF
-if { (eval echo configure:6247: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
cf_cv_ncurses_version=`cat $cf_tempfile`
cf_ncurses_LIBS=""
cf_ncurses_SAVE="$LIBS"
echo $ac_n "checking for Gpm_Open in -lgpm""... $ac_c" 1>&6
-echo "configure:6278: checking for Gpm_Open in -lgpm" >&5
+echo "configure:6046: checking for Gpm_Open in -lgpm" >&5
ac_lib_var=`echo gpm'_'Gpm_Open | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgpm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6286 "configure"
+#line 6054 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
Gpm_Open()
; return 0; }
EOF
-if { (eval echo configure:6297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6065: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for initscr in -lgpm""... $ac_c" 1>&6
-echo "configure:6313: checking for initscr in -lgpm" >&5
+echo "configure:6081: checking for initscr in -lgpm" >&5
ac_lib_var=`echo gpm'_'initscr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgpm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6321 "configure"
+#line 6089 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
initscr()
; return 0; }
EOF
-if { (eval echo configure:6332: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# version of ncurses (but it should do no harm, since it's static).
if test "$cf_nculib_root" = ncurses ; then
echo $ac_n "checking for tgoto in -lmytinfo""... $ac_c" 1>&6
-echo "configure:6364: checking for tgoto in -lmytinfo" >&5
+echo "configure:6132: checking for tgoto in -lmytinfo" >&5
ac_lib_var=`echo mytinfo'_'tgoto | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmytinfo $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6372 "configure"
+#line 6140 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
tgoto()
; return 0; }
EOF
-if { (eval echo configure:6383: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6151: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$cf_have_libdir" = no ; then
test -n "$verbose" && echo " adding $cf_add_libdir to library-path" 1>&6
-echo "${as_me-configure}:6431: testing adding $cf_add_libdir to library-path ..." 1>&5
+echo "${as_me-configure}:6199: testing adding $cf_add_libdir to library-path ..." 1>&5
LDFLAGS="-L$cf_add_libdir $LDFLAGS"
eval 'cf_cv_have_lib_'$cf_nculib_root'=no'
cf_libdir=""
echo $ac_n "checking for initscr""... $ac_c" 1>&6
-echo "configure:6446: checking for initscr" >&5
+echo "configure:6214: checking for initscr" >&5
if eval "test \"`echo '$''{'ac_cv_func_initscr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6451 "configure"
+#line 6219 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char initscr(); below. */
; return 0; }
EOF
-if { (eval echo configure:6474: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6242: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_initscr=yes"
else
cf_save_LIBS="$LIBS"
echo $ac_n "checking for initscr in -l$cf_nculib_root""... $ac_c" 1>&6
-echo "configure:6494: checking for initscr in -l$cf_nculib_root" >&5
+echo "configure:6262: checking for initscr in -l$cf_nculib_root" >&5
LIBS="-l$cf_nculib_root $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6497 "configure"
+#line 6265 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
int main() {
initscr()
; return 0; }
EOF
-if { (eval echo configure:6504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
eval 'cf_cv_have_lib_'$cf_nculib_root'=yes'
for cf_libdir in $cf_search
do
echo $ac_n "checking for -l$cf_nculib_root in $cf_libdir""... $ac_c" 1>&6
-echo "configure:6611: checking for -l$cf_nculib_root in $cf_libdir" >&5
+echo "configure:6379: checking for -l$cf_nculib_root in $cf_libdir" >&5
LIBS="-L$cf_libdir -l$cf_nculib_root $cf_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6614 "configure"
+#line 6382 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
int main() {
initscr()
; return 0; }
EOF
-if { (eval echo configure:6621: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6389: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
eval 'cf_cv_have_lib_'$cf_nculib_root'=yes'
if test -n "$cf_ncurses_LIBS" ; then
echo $ac_n "checking if we can link $cf_nculib_root without $cf_ncurses_LIBS""... $ac_c" 1>&6
-echo "configure:6652: checking if we can link $cf_nculib_root without $cf_ncurses_LIBS" >&5
+echo "configure:6420: checking if we can link $cf_nculib_root without $cf_ncurses_LIBS" >&5
cf_ncurses_SAVE="$LIBS"
for p in $cf_ncurses_LIBS ; do
q=`echo $LIBS | sed -e "s%$p %%" -e "s%$p$%%"`
fi
done
cat > conftest.$ac_ext <<EOF
-#line 6661 "configure"
+#line 6429 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
int main() {
initscr(); mousemask(0,0); tgoto((char *)0, 0, 0);
; return 0; }
EOF
-if { (eval echo configure:6668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6436: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
echo "$ac_t""yes" 1>&6
else
;;
pdcurses) #(vi
- if test "$no_x" = yes; then
- # Not all programs may use this symbol, but it does not hurt to define it.
- cat >> confdefs.h <<\EOF
-#define X_DISPLAY_MISSING 1
-EOF
+ # If we find X, set shell vars x_includes and x_libraries to the
+# paths, otherwise set no_x=yes.
+# Uses ac_ vars as temps to allow command line to override cache and checks.
+# --without-x overrides everything else, but does not touch the cache.
+echo $ac_n "checking for X""... $ac_c" 1>&6
+echo "configure:6467: checking for X" >&5
- X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
-else
- if test -n "$x_includes"; then
- X_CFLAGS="$X_CFLAGS -I$x_includes"
- fi
- # It would also be nice to do this for all -L options, not just this one.
- if test -n "$x_libraries"; then
- X_LIBS="$X_LIBS -L$x_libraries"
- # For Solaris; some versions of Sun CC require a space after -R and
- # others require no space. Words are not sufficient . . . .
- case "`(uname -sr) 2>/dev/null`" in
- "SunOS 5"*)
- echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:6714: checking whether -R must be followed by a space" >&5
- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
- cat > conftest.$ac_ext <<EOF
-#line 6717 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:6724: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_R_nospace=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_R_nospace=no
+# Check whether --with-x or --without-x was given.
+if test "${with_x+set}" = set; then
+ withval="$with_x"
+ :
fi
-rm -f conftest*
- if test $ac_R_nospace = yes; then
- echo "$ac_t""no" 1>&6
- X_LIBS="$X_LIBS -R$x_libraries"
- else
- LIBS="$ac_xsave_LIBS -R $x_libraries"
- cat > conftest.$ac_ext <<EOF
-#line 6740 "configure"
-#include "confdefs.h"
-
-int main() {
-; return 0; }
-EOF
-if { (eval echo configure:6747: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_R_space=yes
+# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
+if test "x$with_x" = xno; then
+ # The user explicitly disabled X.
+ have_x=disabled
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_R_space=no
-fi
-rm -f conftest*
- if test $ac_R_space = yes; then
- echo "$ac_t""yes" 1>&6
- X_LIBS="$X_LIBS -R $x_libraries"
- else
- echo "$ac_t""neither works" 1>&6
- fi
+ if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
+ # Both variables are already set.
+ have_x=yes
+ else
+if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # One or both of the vars are not set, and there is no cached value.
+ac_x_includes=NO ac_x_libraries=NO
+rm -fr conftestdir
+if mkdir conftestdir; then
+ cd conftestdir
+ # Make sure to not put "make" in the Imakefile rules, since we grep it out.
+ cat > Imakefile <<'EOF'
+acfindx:
+ @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
+EOF
+ if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+ eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
+ # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
+ for ac_extension in a so sl; do
+ if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
+ test -f $ac_im_libdir/libX11.$ac_extension; then
+ ac_im_usrlibdir=$ac_im_libdir; break
fi
- LIBS="$ac_xsave_LIBS"
+ done
+ # Screen out bogus values from the imake configuration. They are
+ # bogus both because they are the default anyway, and because
+ # using them would break gcc on systems where it needs fixed includes.
+ case "$ac_im_incroot" in
+ /usr/include) ;;
+ *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
+ esac
+ case "$ac_im_usrlibdir" in
+ /usr/lib | /lib) ;;
+ *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
esac
fi
+ cd ..
+ rm -fr conftestdir
+fi
- # Check for system-dependent libraries X programs must link with.
- # Do this before checking for the system-independent R6 libraries
- # (-lICE), since we may need -lsocket or whatever for X linking.
+if test "$ac_x_includes" = NO; then
+ # Guess where to find include files, by looking for this one X11 .h file.
+ test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
- if test "$ISC" = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
- else
- # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
- # libraries were built with DECnet support. And karl@cs.umb.edu says
- # the Alpha needs dnet_stub (dnet does not exist).
- echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:6779: checking for dnet_ntoa in -ldnet" >&5
-ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldnet $LIBS"
+ # First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 6787 "configure"
+#line 6530 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char dnet_ntoa();
-
-int main() {
-dnet_ntoa()
-; return 0; }
+#include <$x_direct_test_include>
EOF
-if { (eval echo configure:6798: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:6535: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ # We can compile using X headers with no special include directory.
+ac_x_includes=
else
+ echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ # Look for the header file in a standard set of common directories.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+ for ac_dir in \
+ /usr/X11/include \
+ /usr/X11R6/include \
+ /usr/X11R5/include \
+ /usr/X11R4/include \
+ \
+ /usr/include/X11 \
+ /usr/include/X11R6 \
+ /usr/include/X11R5 \
+ /usr/include/X11R4 \
+ \
+ /usr/local/X11/include \
+ /usr/local/X11R6/include \
+ /usr/local/X11R5/include \
+ /usr/local/X11R4/include \
+ \
+ /usr/local/include/X11 \
+ /usr/local/include/X11R6 \
+ /usr/local/include/X11R5 \
+ /usr/local/include/X11R4 \
+ \
+ /usr/X386/include \
+ /usr/x386/include \
+ /usr/XFree86/include/X11 \
+ \
+ /usr/include \
+ /usr/local/include \
+ /usr/unsupported/include \
+ /usr/athena/include \
+ /usr/local/x11r5/include \
+ /usr/lpp/Xamples/include \
+ \
+ /usr/openwin/include \
+ /usr/openwin/share/include \
+ ; \
+ do
+ if test -r "$ac_dir/$x_direct_test_include"; then
+ ac_x_includes=$ac_dir
+ break
+ fi
+ done
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
+fi # $ac_x_includes = NO
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
-else
- echo "$ac_t""no" 1>&6
-fi
+if test "$ac_x_libraries" = NO; then
+ # Check for the libraries.
- if test $ac_cv_lib_dnet_dnet_ntoa = no; then
- echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:6820: checking for dnet_ntoa in -ldnet_stub" >&5
-ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
+ test -z "$x_direct_test_library" && x_direct_test_library=Xt
+ test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
+
+ # See if we find them without any special options.
+ # Don't add to $LIBS permanently.
ac_save_LIBS="$LIBS"
-LIBS="-ldnet_stub $LIBS"
+ LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6828 "configure"
+#line 6604 "configure"
#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char dnet_ntoa();
int main() {
-dnet_ntoa()
+${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:6839: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
+ LIBS="$ac_save_LIBS"
+# We can link X programs with no special library path.
+ac_x_libraries=
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+ LIBS="$ac_save_LIBS"
+# First see if replacing the include by lib works.
+# Check X11 before X11Rn because it is often a symlink to the current release.
+for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
+ /usr/X11/lib \
+ /usr/X11R6/lib \
+ /usr/X11R5/lib \
+ /usr/X11R4/lib \
+ \
+ /usr/lib/X11 \
+ /usr/lib/X11R6 \
+ /usr/lib/X11R5 \
+ /usr/lib/X11R4 \
+ \
+ /usr/local/X11/lib \
+ /usr/local/X11R6/lib \
+ /usr/local/X11R5/lib \
+ /usr/local/X11R4/lib \
+ \
+ /usr/local/lib/X11 \
+ /usr/local/lib/X11R6 \
+ /usr/local/lib/X11R5 \
+ /usr/local/lib/X11R4 \
+ \
+ /usr/X386/lib \
+ /usr/x386/lib \
+ /usr/XFree86/lib/X11 \
+ \
+ /usr/lib \
+ /usr/local/lib \
+ /usr/unsupported/lib \
+ /usr/athena/lib \
+ /usr/local/x11r5/lib \
+ /usr/lpp/Xamples/lib \
+ /lib/usr/lib/X11 \
+ \
+ /usr/openwin/lib \
+ /usr/openwin/share/lib \
+ ; \
+do
+ for ac_extension in a so sl; do
+ if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
+ ac_x_libraries=$ac_dir
+ break 2
+ fi
+ done
+done
fi
rm -f conftest*
-LIBS="$ac_save_LIBS"
+fi # $ac_x_libraries = NO
-fi
+if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
+ # Didn't find X anywhere. Cache the known absence of X.
+ ac_cv_have_x="have_x=no"
+else
+ # Record where we found X for the cache.
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
+fi
+fi
+ fi
+ eval "$ac_cv_have_x"
+fi # $with_x != no
+
+if test "$have_x" != yes; then
+ echo "$ac_t""$have_x" 1>&6
+ no_x=yes
+else
+ # If each of the values was on the command line, it overrides each guess.
+ test "x$x_includes" = xNONE && x_includes=$ac_x_includes
+ test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
+ # Update the cache value to reflect the command line values.
+ ac_cv_have_x="have_x=yes \
+ ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
+ echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
+fi
+
+
+echo $ac_n "checking if you want to use pkg-config""... $ac_c" 1>&6
+echo "configure:6699: checking if you want to use pkg-config" >&5
+
+# Check whether --with-pkg-config or --without-pkg-config was given.
+if test "${with_pkg_config+set}" = set; then
+ withval="$with_pkg_config"
+ cf_pkg_config=$withval
+else
+ cf_pkg_config=yes
+fi
+
+echo "$ac_t""$cf_pkg_config" 1>&6
+
+case $cf_pkg_config in #(vi
+no) #(vi
+ PKG_CONFIG=none
+ ;;
+yes) #(vi
+ # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:6719: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_PKG_CONFIG'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$PKG_CONFIG" in
+ /*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_PKG_CONFIG="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_path_PKG_CONFIG" && ac_cv_path_PKG_CONFIG="none"
+ ;;
+esac
+fi
+PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+if test -n "$PKG_CONFIG"; then
+ echo "$ac_t""$PKG_CONFIG" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ ;;
+*)
+ PKG_CONFIG=$withval
+ ;;
+esac
+
+test -z "$PKG_CONFIG" && PKG_CONFIG=none
+if test "$PKG_CONFIG" != none ; then
+
+if test "x$prefix" != xNONE; then
+ cf_path_syntax="$prefix"
+else
+ cf_path_syntax="$ac_default_prefix"
+fi
+
+case ".$PKG_CONFIG" in #(vi
+.\$\(*\)*|.\'*\'*) #(vi
+ ;;
+..|./*|.\\*) #(vi
+ ;;
+.[a-zA-Z]:[\\/]*) #(vi OS/2 EMX
+ ;;
+.\${*prefix}*) #(vi
+ eval PKG_CONFIG="$PKG_CONFIG"
+ case ".$PKG_CONFIG" in #(vi
+ .NONE/*)
+ PKG_CONFIG=`echo $PKG_CONFIG | sed -e s%NONE%$cf_path_syntax%`
+ ;;
+ esac
+ ;; #(vi
+.no|.NONE/*)
+ PKG_CONFIG=`echo $PKG_CONFIG | sed -e s%NONE%$cf_path_syntax%`
+ ;;
+*)
+ { echo "configure: error: expected a pathname, not \"$PKG_CONFIG\"" 1>&2; exit 1; }
+ ;;
+esac
+
+fi
+
+
+
+if test "$no_x" = yes; then
+ # Not all programs may use this symbol, but it does not hurt to define it.
+ cat >> confdefs.h <<\EOF
+#define X_DISPLAY_MISSING 1
+EOF
+
+ X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
+else
+ if test -n "$x_includes"; then
+ X_CFLAGS="$X_CFLAGS -I$x_includes"
+ fi
+
+ # It would also be nice to do this for all -L options, not just this one.
+ if test -n "$x_libraries"; then
+ X_LIBS="$X_LIBS -L$x_libraries"
+ # For Solaris; some versions of Sun CC require a space after -R and
+ # others require no space. Words are not sufficient . . . .
+ case "`(uname -sr) 2>/dev/null`" in
+ "SunOS 5"*)
+ echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
+echo "configure:6814: checking whether -R must be followed by a space" >&5
+ ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
+ cat > conftest.$ac_ext <<EOF
+#line 6817 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:6824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_R_nospace=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_R_nospace=no
+fi
+rm -f conftest*
+ if test $ac_R_nospace = yes; then
+ echo "$ac_t""no" 1>&6
+ X_LIBS="$X_LIBS -R$x_libraries"
+ else
+ LIBS="$ac_xsave_LIBS -R $x_libraries"
+ cat > conftest.$ac_ext <<EOF
+#line 6840 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:6847: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ ac_R_space=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_R_space=no
+fi
+rm -f conftest*
+ if test $ac_R_space = yes; then
+ echo "$ac_t""yes" 1>&6
+ X_LIBS="$X_LIBS -R $x_libraries"
+ else
+ echo "$ac_t""neither works" 1>&6
+ fi
+ fi
+ LIBS="$ac_xsave_LIBS"
+ esac
+ fi
+
+ # Check for system-dependent libraries X programs must link with.
+ # Do this before checking for the system-independent R6 libraries
+ # (-lICE), since we may need -lsocket or whatever for X linking.
+
+ if test "$ISC" = yes; then
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
+ else
+ # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
+ # libraries were built with DECnet support. And karl@cs.umb.edu says
+ # the Alpha needs dnet_stub (dnet does not exist).
+ echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
+echo "configure:6879: checking for dnet_ntoa in -ldnet" >&5
+ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 6887 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa();
+
+int main() {
+dnet_ntoa()
+; return 0; }
+EOF
+if { (eval echo configure:6898: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ if test $ac_cv_lib_dnet_dnet_ntoa = no; then
+ echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
+echo "configure:6920: checking for dnet_ntoa in -ldnet_stub" >&5
+ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldnet_stub $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 6928 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dnet_ntoa();
+
+int main() {
+dnet_ntoa()
+; return 0; }
+EOF
+if { (eval echo configure:6939: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:6868: checking for gethostbyname" >&5
+echo "configure:6968: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6873 "configure"
+#line 6973 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:6896: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:6917: checking for gethostbyname in -lnsl" >&5
+echo "configure:7017: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6925 "configure"
+#line 7025 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:6936: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:6966: checking for connect" >&5
+echo "configure:7066: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6971 "configure"
+#line 7071 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:6994: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7094: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:7015: checking for connect in -lsocket" >&5
+echo "configure:7115: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7023 "configure"
+#line 7123 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:7034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:7058: checking for remove" >&5
+echo "configure:7158: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7063 "configure"
+#line 7163 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
; return 0; }
EOF
-if { (eval echo configure:7086: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:7107: checking for remove in -lposix" >&5
+echo "configure:7207: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7115 "configure"
+#line 7215 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
remove()
; return 0; }
EOF
-if { (eval echo configure:7126: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7226: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:7150: checking for shmat" >&5
+echo "configure:7250: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7155 "configure"
+#line 7255 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
; return 0; }
EOF
-if { (eval echo configure:7178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7278: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:7199: checking for shmat in -lipc" >&5
+echo "configure:7299: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7207 "configure"
+#line 7307 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char shmat();
-int main() {
-shmat()
-; return 0; }
-EOF
-if { (eval echo configure:7218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
+int main() {
+shmat()
+; return 0; }
+EOF
+if { (eval echo configure:7318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ fi
+ fi
+
+ # Check for libraries that X11R6 Xt/Xaw programs need.
+ ac_save_LDFLAGS="$LDFLAGS"
+ test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
+ # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+ # check for ICE first), but we must link in the order -lSM -lICE or
+ # we get undefined symbols. So assume we have SM if we have ICE.
+ # These have to be linked with before -lX11, unlike the other
+ # libraries we check for below, so use a different variable.
+ # --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
+ echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
+echo "configure:7351: checking for IceConnectionNumber in -lICE" >&5
+ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-lICE $X_EXTRA_LIBS $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 7359 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char IceConnectionNumber();
+
+int main() {
+IceConnectionNumber()
+; return 0; }
+EOF
+if { (eval echo configure:7370: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ LDFLAGS="$ac_save_LDFLAGS"
+
+fi
+
+
+cf_x_athena=${cf_x_athena-Xaw}
+
+echo $ac_n "checking if you want to link with Xaw 3d library""... $ac_c" 1>&6
+echo "configure:7398: checking if you want to link with Xaw 3d library" >&5
+withval=
+
+# Check whether --with-Xaw3d or --without-Xaw3d was given.
+if test "${with_Xaw3d+set}" = set; then
+ withval="$with_Xaw3d"
+ :
+fi
+
+if test "$withval" = yes ; then
+ cf_x_athena=Xaw3d
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking if you want to link with neXT Athena library""... $ac_c" 1>&6
+echo "configure:7415: checking if you want to link with neXT Athena library" >&5
+withval=
+
+# Check whether --with-neXtaw or --without-neXtaw was given.
+if test "${with_neXtaw+set}" = set; then
+ withval="$with_neXtaw"
+ :
+fi
+
+if test "$withval" = yes ; then
+ cf_x_athena=neXtaw
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+echo $ac_n "checking if you want to link with Athena-Plus library""... $ac_c" 1>&6
+echo "configure:7432: checking if you want to link with Athena-Plus library" >&5
+withval=
+
+# Check whether --with-XawPlus or --without-XawPlus was given.
+if test "${with_XawPlus+set}" = set; then
+ withval="$with_XawPlus"
+ :
+fi
+
+if test "$withval" = yes ; then
+ cf_x_athena=XawPlus
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+cf_x_athena_lib=""
+
+if test "$PKG_CONFIG" != none ; then
+ cf_athena_list=
+ test "$cf_x_athena" = Xaw && cf_athena_list="xaw8 xaw7 xaw6"
+ for cf_athena_pkg in \
+ $cf_athena_list \
+ ${cf_x_athena} \
+ ${cf_x_athena}-devel \
+ lib${cf_x_athena} \
+ lib${cf_x_athena}-devel
+ do
+ if "$PKG_CONFIG" --exists $cf_athena_pkg; then
+ test -n "$verbose" && echo " found package $cf_athena_pkg" 1>&6
+
+echo "${as_me-configure}:7463: testing found package $cf_athena_pkg ..." 1>&5
+
+
+ cf_x_athena_inc="`$PKG_CONFIG --cflags $cf_athena_pkg 2>/dev/null`"
+ cf_x_athena_lib="`$PKG_CONFIG --libs $cf_athena_pkg 2>/dev/null`"
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_x_athena_inc
+do
+case $cf_fix_cppflags in
+no)
+ case $cf_add_cflags in #(vi
+ -undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C) #(vi
+ case $cf_add_cflags in
+ -D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "${cf_add_cflags}" != "${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ *$cf_add_cflags) #(vi
+ ;;
+ *) #(vi
+ case $cf_add_cflags in #(vi
+ -D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ *)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "${cf_add_cflags}" != "${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
+fi
+
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
+
+
+
+
+ LIBS="$cf_x_athena_lib $LIBS"
+
+
+cf_x_athena_LIBS=`echo "HAVE_LIB_$cf_x_athena" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%`
+
+ cat >> confdefs.h <<EOF
+#define $cf_x_athena_LIBS 1
+EOF
+
+ break
+ fi
+ done
+fi
+
+if test -z "$cf_x_athena_lib" ; then
+
+
+
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists Xext; then
+ test -n "$verbose" && echo " found package Xext" 1>&6
+
+echo "${as_me-configure}:7572: testing found package Xext ..." 1>&5
+
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags Xext 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs Xext 2>/dev/null`"
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+no)
+ case $cf_add_cflags in #(vi
+ -undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C) #(vi
+ case $cf_add_cflags in
+ -D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "${cf_add_cflags}" != "${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ *$cf_add_cflags) #(vi
+ ;;
+ *) #(vi
+ case $cf_add_cflags in #(vi
+ -D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ *)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "${cf_add_cflags}" != "${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
-else
- echo "$ac_t""no" 1>&6
+
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
fi
- fi
- fi
- # Check for libraries that X11R6 Xt/Xaw programs need.
- ac_save_LDFLAGS="$LDFLAGS"
- test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
- # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
- # check for ICE first), but we must link in the order -lSM -lICE or
- # we get undefined symbols. So assume we have SM if we have ICE.
- # These have to be linked with before -lX11, unlike the other
- # libraries we check for below, so use a different variable.
- # --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
- echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:7251: checking for IceConnectionNumber in -lICE" >&5
-ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
+
+
+ LIBS="$cf_pkgconfig_libs $LIBS"
+ :
+else
+
+ echo $ac_n "checking for XextCreateExtension in -lXext""... $ac_c" 1>&6
+echo "configure:7664: checking for XextCreateExtension in -lXext" >&5
+ac_lib_var=`echo Xext'_'XextCreateExtension | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
-LIBS="-lICE $X_EXTRA_LIBS $LIBS"
+LIBS="-lXext $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7259 "configure"
+#line 7672 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
-char IceConnectionNumber();
+char XextCreateExtension();
int main() {
-IceConnectionNumber()
+XextCreateExtension()
; return 0; }
EOF
-if { (eval echo configure:7270: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
- X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
+ LIBS="-lXext $LIBS"
else
echo "$ac_t""no" 1>&6
fi
- LDFLAGS="$ac_save_LDFLAGS"
+fi
+
+
+
+
+
+
+cf_have_X_LIBS=no
+
+
+
+
+if test "$PKG_CONFIG" != none && "$PKG_CONFIG" --exists xt; then
+ test -n "$verbose" && echo " found package xt" 1>&6
+
+echo "${as_me-configure}:7718: testing found package xt ..." 1>&5
+
+
+ cf_pkgconfig_incs="`$PKG_CONFIG --cflags xt 2>/dev/null`"
+ cf_pkgconfig_libs="`$PKG_CONFIG --libs xt 2>/dev/null`"
+
+cf_fix_cppflags=no
+cf_new_cflags=
+cf_new_cppflags=
+cf_new_extra_cppflags=
+
+for cf_add_cflags in $cf_pkgconfig_incs
+do
+case $cf_fix_cppflags in
+no)
+ case $cf_add_cflags in #(vi
+ -undef|-nostdinc*|-I*|-D*|-U*|-E|-P|-C) #(vi
+ case $cf_add_cflags in
+ -D*)
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^-D[^=]*='\''\"[^"]*//'`
+
+ test "${cf_add_cflags}" != "${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=yes
+
+ if test $cf_fix_cppflags = yes ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ elif test "${cf_tst_cflags}" = "\"'" ; then
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+ continue
+ fi
+ ;;
+ esac
+ case "$CPPFLAGS" in
+ *$cf_add_cflags) #(vi
+ ;;
+ *) #(vi
+ case $cf_add_cflags in #(vi
+ -D*)
+ cf_tst_cppflags=`echo "x$cf_add_cflags" | sed -e 's/^...//' -e 's/=.*//'`
+
+CPPFLAGS=`echo "$CPPFLAGS" | \
+ sed -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?[ ]/ /g' \
+ -e 's/-[UD]'"$cf_tst_cppflags"'\(=[^ ]*\)\?$//g'`
+
+ ;;
+ esac
+ cf_new_cppflags="$cf_new_cppflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+ *)
+ cf_new_cflags="$cf_new_cflags $cf_add_cflags"
+ ;;
+ esac
+ ;;
+yes)
+ cf_new_extra_cppflags="$cf_new_extra_cppflags $cf_add_cflags"
+
+ cf_tst_cflags=`echo ${cf_add_cflags} |sed -e 's/^[^"]*"'\''//'`
+
+ test "${cf_add_cflags}" != "${cf_tst_cflags}" \
+ && test -z "${cf_tst_cflags}" \
+ && cf_fix_cppflags=no
+ ;;
+esac
+done
+if test -n "$cf_new_cflags" ; then
+
+ CFLAGS="$CFLAGS $cf_new_cflags"
fi
+if test -n "$cf_new_cppflags" ; then
+
+ CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
+fi
+if test -n "$cf_new_extra_cppflags" ; then
+
+ EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
+fi
-# SYSTEM_NAME=`echo "$cf_cv_system_name"|tr ' ' -`
-cf_have_X_LIBS=no
+ LIBS="$cf_pkgconfig_libs $LIBS"
+
+ cf_have_X_LIBS=yes
-LDFLAGS="$X_LIBS $LDFLAGS"
+else
+
+ LDFLAGS="$X_LIBS $LDFLAGS"
+
test -n "$verbose" && echo " checking additions to CFLAGS" 1>&6
-echo "${as_me-configure}:7306: testing checking additions to CFLAGS ..." 1>&5
+echo "${as_me-configure}:7816: testing checking additions to CFLAGS ..." 1>&5
cf_check_cflags="$CFLAGS"
if test -n "$cf_new_cflags" ; then
test -n "$verbose" && echo " add to \$CFLAGS $cf_new_cflags" 1>&6
-echo "${as_me-configure}:7378: testing add to \$CFLAGS $cf_new_cflags ..." 1>&5
+echo "${as_me-configure}:7888: testing add to \$CFLAGS $cf_new_cflags ..." 1>&5
CFLAGS="$CFLAGS $cf_new_cflags"
if test -n "$cf_new_cppflags" ; then
test -n "$verbose" && echo " add to \$CPPFLAGS $cf_new_cppflags" 1>&6
-echo "${as_me-configure}:7387: testing add to \$CPPFLAGS $cf_new_cppflags ..." 1>&5
+echo "${as_me-configure}:7897: testing add to \$CPPFLAGS $cf_new_cppflags ..." 1>&5
CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
if test -n "$cf_new_extra_cppflags" ; then
test -n "$verbose" && echo " add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags" 1>&6
-echo "${as_me-configure}:7396: testing add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags ..." 1>&5
+echo "${as_me-configure}:7906: testing add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags ..." 1>&5
EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
if test "$cf_check_cflags" != "$CFLAGS" ; then
cat > conftest.$ac_ext <<EOF
-#line 7407 "configure"
+#line 7917 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
printf("Hello world");
; return 0; }
EOF
-if { (eval echo configure:7414: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
:
else
echo "configure: failed program was:" >&5
rm -rf conftest*
test -n "$verbose" && echo " test-compile failed. Undoing change to \$CFLAGS" 1>&6
-echo "${as_me-configure}:7422: testing test-compile failed. Undoing change to \$CFLAGS ..." 1>&5
+echo "${as_me-configure}:7932: testing test-compile failed. Undoing change to \$CFLAGS ..." 1>&5
if test "$cf_check_cppflags" != "$CPPFLAGS" ; then
test -n "$verbose" && echo " but keeping change to \$CPPFLAGS" 1>&6
-echo "${as_me-configure}:7428: testing but keeping change to \$CPPFLAGS ..." 1>&5
+echo "${as_me-configure}:7938: testing but keeping change to \$CPPFLAGS ..." 1>&5
fi
fi
-echo $ac_n "checking for XOpenDisplay""... $ac_c" 1>&6
-echo "configure:7439: checking for XOpenDisplay" >&5
+ echo $ac_n "checking for XOpenDisplay""... $ac_c" 1>&6
+echo "configure:7949: checking for XOpenDisplay" >&5
if eval "test \"`echo '$''{'ac_cv_func_XOpenDisplay'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7444 "configure"
+#line 7954 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char XOpenDisplay(); below. */
; return 0; }
EOF
-if { (eval echo configure:7467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7977: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_XOpenDisplay=yes"
else
else
echo "$ac_t""no" 1>&6
-echo $ac_n "checking for XOpenDisplay in -lX11""... $ac_c" 1>&6
-echo "configure:7486: checking for XOpenDisplay in -lX11" >&5
+ echo $ac_n "checking for XOpenDisplay in -lX11""... $ac_c" 1>&6
+echo "configure:7996: checking for XOpenDisplay in -lX11" >&5
ac_lib_var=`echo X11'_'XOpenDisplay | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lX11 $X_PRE_LIBS $LIBS $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7494 "configure"
+#line 8004 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XOpenDisplay()
; return 0; }
EOF
-if { (eval echo configure:7505: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
-echo $ac_n "checking for XtAppInitialize""... $ac_c" 1>&6
-echo "configure:7529: checking for XtAppInitialize" >&5
+ echo $ac_n "checking for XtAppInitialize""... $ac_c" 1>&6
+echo "configure:8039: checking for XtAppInitialize" >&5
if eval "test \"`echo '$''{'ac_cv_func_XtAppInitialize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7534 "configure"
+#line 8044 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char XtAppInitialize(); below. */
; return 0; }
EOF
-if { (eval echo configure:7557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8067: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_XtAppInitialize=yes"
else
else
echo "$ac_t""no" 1>&6
-echo $ac_n "checking for XtAppInitialize in -lXt""... $ac_c" 1>&6
-echo "configure:7576: checking for XtAppInitialize in -lXt" >&5
+ echo $ac_n "checking for XtAppInitialize in -lXt""... $ac_c" 1>&6
+echo "configure:8086: checking for XtAppInitialize in -lXt" >&5
ac_lib_var=`echo Xt'_'XtAppInitialize | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lXt $X_PRE_LIBS $LIBS $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7584 "configure"
+#line 8094 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XtAppInitialize()
; return 0; }
EOF
-if { (eval echo configure:7595: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
#define HAVE_LIBXT 1
EOF
- cf_have_X_LIBS=Xt
- LIBS="-lXt $X_PRE_LIBS $LIBS $X_EXTRA_LIBS"
+ cf_have_X_LIBS=Xt
+ LIBS="-lXt $X_PRE_LIBS $LIBS $X_EXTRA_LIBS"
else
echo "$ac_t""no" 1>&6
fi
fi
+fi
+
+
if test $cf_have_X_LIBS = no ; then
echo "configure: warning: Unable to successfully link X Toolkit library (-lXt) with
test program. You will have to check and add the proper libraries by hand
to makefile." 1>&2
fi
-
-cf_x_athena=${cf_x_athena-Xaw}
-
-echo $ac_n "checking if you want to link with Xaw 3d library""... $ac_c" 1>&6
-echo "configure:7633: checking if you want to link with Xaw 3d library" >&5
-withval=
-
-# Check whether --with-Xaw3d or --without-Xaw3d was given.
-if test "${with_Xaw3d+set}" = set; then
- withval="$with_Xaw3d"
- :
-fi
-
-if test "$withval" = yes ; then
- cf_x_athena=Xaw3d
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking if you want to link with neXT Athena library""... $ac_c" 1>&6
-echo "configure:7650: checking if you want to link with neXT Athena library" >&5
-withval=
-
-# Check whether --with-neXtaw or --without-neXtaw was given.
-if test "${with_neXtaw+set}" = set; then
- withval="$with_neXtaw"
- :
-fi
-
-if test "$withval" = yes ; then
- cf_x_athena=neXtaw
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking if you want to link with Athena-Plus library""... $ac_c" 1>&6
-echo "configure:7667: checking if you want to link with Athena-Plus library" >&5
-withval=
-
-# Check whether --with-XawPlus or --without-XawPlus was given.
-if test "${with_XawPlus+set}" = set; then
- withval="$with_XawPlus"
- :
-fi
-
-if test "$withval" = yes ; then
- cf_x_athena=XawPlus
- echo "$ac_t""yes" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
-echo $ac_n "checking for XextCreateExtension in -lXext""... $ac_c" 1>&6
-echo "configure:7684: checking for XextCreateExtension in -lXext" >&5
-ac_lib_var=`echo Xext'_'XextCreateExtension | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lXext $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7692 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char XextCreateExtension();
-
-int main() {
-XextCreateExtension()
-; return 0; }
-EOF
-if { (eval echo configure:7703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- LIBS="-lXext $LIBS"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
-cf_x_athena_lib=""
-
-
+
cf_x_athena_root=$cf_x_athena
-cf_x_athena_include=""
+cf_x_athena_inc=""
for cf_path in default \
/usr/contrib/X11R6 \
/usr/lib/X11R5 \
/usr/local
do
- if test -z "$cf_x_athena_include" ; then
+ if test -z "$cf_x_athena_inc" ; then
cf_save="$CPPFLAGS"
cf_test=X11/$cf_x_athena_root/SimpleMenu.h
if test $cf_path != default ; then
CPPFLAGS="$cf_save -I$cf_path/include"
echo $ac_n "checking for $cf_test in $cf_path""... $ac_c" 1>&6
-echo "configure:7742: checking for $cf_test in $cf_path" >&5
+echo "configure:8158: checking for $cf_test in $cf_path" >&5
else
echo $ac_n "checking for $cf_test""... $ac_c" 1>&6
-echo "configure:7745: checking for $cf_test" >&5
+echo "configure:8161: checking for $cf_test" >&5
fi
cat > conftest.$ac_ext <<EOF
-#line 7748 "configure"
+#line 8164 "configure"
#include "confdefs.h"
#include <X11/Intrinsic.h>
; return 0; }
EOF
-if { (eval echo configure:7757: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8173: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_result=yes
else
rm -f conftest*
echo "$ac_t""$cf_result" 1>&6
if test "$cf_result" = yes ; then
- cf_x_athena_include=$cf_path
+ cf_x_athena_inc=$cf_path
break
else
CPPFLAGS="$cf_save"
fi
done
-if test -z "$cf_x_athena_include" ; then
+if test -z "$cf_x_athena_inc" ; then
echo "configure: warning: Unable to successfully find Athena header files with test program" 1>&2
-elif test "$cf_x_athena_include" != default ; then
- CPPFLAGS="$CPPFLAGS -I$cf_x_athena_include"
+elif test "$cf_x_athena_inc" != default ; then
+ CPPFLAGS="$CPPFLAGS -I$cf_x_athena_inc"
fi
-
+
cf_x_athena_root=$cf_x_athena
cf_x_athena_lib=""
if test $cf_path != default ; then
LIBS="-L$cf_path/lib $cf_lib $LIBS"
echo $ac_n "checking for $cf_lib in $cf_path""... $ac_c" 1>&6
-echo "configure:7804: checking for $cf_lib in $cf_path" >&5
+echo "configure:8220: checking for $cf_lib in $cf_path" >&5
else
LIBS="$cf_lib $LIBS"
echo $ac_n "checking for $cf_test in $cf_lib""... $ac_c" 1>&6
-echo "configure:7808: checking for $cf_test in $cf_lib" >&5
+echo "configure:8224: checking for $cf_test in $cf_lib" >&5
fi
cat > conftest.$ac_ext <<EOF
-#line 7811 "configure"
+#line 8227 "configure"
#include "confdefs.h"
int main() {
$cf_test()
; return 0; }
EOF
-if { (eval echo configure:7818: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_result=yes
else
EOF
+fi
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7859: checking for $ac_word" >&5
+echo "configure:8276: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XCURSES_CONFIG'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$verbose" && echo " checking additions to CFLAGS" 1>&6
-echo "${as_me-configure}:7909: testing checking additions to CFLAGS ..." 1>&5
+echo "${as_me-configure}:8326: testing checking additions to CFLAGS ..." 1>&5
cf_check_cflags="$CFLAGS"
if test -n "$cf_new_cflags" ; then
test -n "$verbose" && echo " add to \$CFLAGS $cf_new_cflags" 1>&6
-echo "${as_me-configure}:7981: testing add to \$CFLAGS $cf_new_cflags ..." 1>&5
+echo "${as_me-configure}:8398: testing add to \$CFLAGS $cf_new_cflags ..." 1>&5
CFLAGS="$CFLAGS $cf_new_cflags"
if test -n "$cf_new_cppflags" ; then
test -n "$verbose" && echo " add to \$CPPFLAGS $cf_new_cppflags" 1>&6
-echo "${as_me-configure}:7990: testing add to \$CPPFLAGS $cf_new_cppflags ..." 1>&5
+echo "${as_me-configure}:8407: testing add to \$CPPFLAGS $cf_new_cppflags ..." 1>&5
CPPFLAGS="$CPPFLAGS $cf_new_cppflags"
if test -n "$cf_new_extra_cppflags" ; then
test -n "$verbose" && echo " add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags" 1>&6
-echo "${as_me-configure}:7999: testing add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags ..." 1>&5
+echo "${as_me-configure}:8416: testing add to \$EXTRA_CPPFLAGS $cf_new_extra_cppflags ..." 1>&5
EXTRA_CPPFLAGS="$cf_new_extra_cppflags $EXTRA_CPPFLAGS"
if test "$cf_check_cflags" != "$CFLAGS" ; then
cat > conftest.$ac_ext <<EOF
-#line 8010 "configure"
+#line 8427 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
printf("Hello world");
; return 0; }
EOF
-if { (eval echo configure:8017: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8434: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
:
else
echo "configure: failed program was:" >&5
rm -rf conftest*
test -n "$verbose" && echo " test-compile failed. Undoing change to \$CFLAGS" 1>&6
-echo "${as_me-configure}:8025: testing test-compile failed. Undoing change to \$CFLAGS ..." 1>&5
+echo "${as_me-configure}:8442: testing test-compile failed. Undoing change to \$CFLAGS ..." 1>&5
if test "$cf_check_cppflags" != "$CPPFLAGS" ; then
test -n "$verbose" && echo " but keeping change to \$CPPFLAGS" 1>&6
-echo "${as_me-configure}:8031: testing but keeping change to \$CPPFLAGS ..." 1>&5
+echo "${as_me-configure}:8448: testing but keeping change to \$CPPFLAGS ..." 1>&5
fi
fi
echo $ac_n "checking for XOpenDisplay in -lX11""... $ac_c" 1>&6
-echo "configure:8041: checking for XOpenDisplay in -lX11" >&5
+echo "configure:8458: checking for XOpenDisplay in -lX11" >&5
ac_lib_var=`echo X11'_'XOpenDisplay | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lX11 $X_PRE_LIBS $LIBS $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8049 "configure"
+#line 8466 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
XOpenDisplay()
; return 0; }
EOF
-if { (eval echo configure:8060: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for XCurses library""... $ac_c" 1>&6
-echo "configure:8081: checking for XCurses library" >&5
+echo "configure:8498: checking for XCurses library" >&5
if eval "test \"`echo '$''{'cf_cv_lib_XCurses'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LIBS="-lXCurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8088 "configure"
+#line 8505 "configure"
#include "confdefs.h"
#include <xcurses.h>
XCursesExit();
; return 0; }
EOF
-if { (eval echo configure:8098: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_cv_lib_XCurses=yes
else
*)
# look for curses-related libraries
echo $ac_n "checking for new_panel in -lpanel$cf_cv_libtype""... $ac_c" 1>&6
-echo "configure:8143: checking for new_panel in -lpanel$cf_cv_libtype" >&5
+echo "configure:8560: checking for new_panel in -lpanel$cf_cv_libtype" >&5
ac_lib_var=`echo panel$cf_cv_libtype'_'new_panel | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpanel$cf_cv_libtype $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8151 "configure"
+#line 8568 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
new_panel()
; return 0; }
EOF
-if { (eval echo configure:8162: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for menu_driver in -lmenu$cf_cv_libtype""... $ac_c" 1>&6
-echo "configure:8190: checking for menu_driver in -lmenu$cf_cv_libtype" >&5
+echo "configure:8607: checking for menu_driver in -lmenu$cf_cv_libtype" >&5
ac_lib_var=`echo menu$cf_cv_libtype'_'menu_driver | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lmenu$cf_cv_libtype $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8198 "configure"
+#line 8615 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
menu_driver()
; return 0; }
EOF
-if { (eval echo configure:8209: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for form_driver in -lform$cf_cv_libtype""... $ac_c" 1>&6
-echo "configure:8237: checking for form_driver in -lform$cf_cv_libtype" >&5
+echo "configure:8654: checking for form_driver in -lform$cf_cv_libtype" >&5
ac_lib_var=`echo form$cf_cv_libtype'_'form_driver | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lform$cf_cv_libtype $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 8245 "configure"
+#line 8662 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
form_driver()
; return 0; }
EOF
-if { (eval echo configure:8256: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8673: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8295: checking for $ac_hdr" >&5
+echo "configure:8712: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8300 "configure"
+#line 8717 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8305: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8722: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
esac
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:8335: checking return type of signal handlers" >&5
+echo "configure:8752: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8340 "configure"
+#line 8757 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:8357: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8774: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:8377: checking for ANSI C header files" >&5
+echo "configure:8794: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8382 "configure"
+#line 8799 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8390: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8807: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 8407 "configure"
+#line 8824 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 8425 "configure"
+#line 8842 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 8446 "configure"
+#line 8863 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:8457: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:8874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:8481: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:8898: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8486 "configure"
+#line 8903 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:8495: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:8912: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:8528: checking for $ac_hdr" >&5
+echo "configure:8945: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8533 "configure"
+#line 8950 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8538: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8955: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:8579: checking for $ac_func" >&5
+echo "configure:8996: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8584 "configure"
+#line 9001 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:8607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9024: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking if we must define _XOPEN_SOURCE_EXTENDED""... $ac_c" 1>&6
-echo "configure:8634: checking if we must define _XOPEN_SOURCE_EXTENDED" >&5
+echo "configure:9051: checking if we must define _XOPEN_SOURCE_EXTENDED" >&5
if eval "test \"`echo '$''{'cf_cv_need_xopen_extension'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8640 "configure"
+#line 9057 "configure"
#include "confdefs.h"
#include <stdlib.h>
getbegyx(stdscr, y1, x1)
; return 0; }
EOF
-if { (eval echo configure:8657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9074: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_cv_need_xopen_extension=no
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 8665 "configure"
+#line 9082 "configure"
#include "confdefs.h"
#define _XOPEN_SOURCE_EXTENDED
getbegyx(stdscr, y1, x1)
; return 0; }
EOF
-if { (eval echo configure:8682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_cv_need_xopen_extension=yes
else
echo $ac_n "checking for term.h""... $ac_c" 1>&6
-echo "configure:8702: checking for term.h" >&5
+echo "configure:9119: checking for term.h" >&5
if eval "test \"`echo '$''{'cf_cv_term_header'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
term.h
do
cat > conftest.$ac_ext <<EOF
-#line 8715 "configure"
+#line 9132 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
WINDOW *x
; return 0; }
EOF
-if { (eval echo configure:8724: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9141: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_term_header=$cf_header
break
for cf_header in ncurses/term.h ncursesw/term.h
do
cat > conftest.$ac_ext <<EOF
-#line 8744 "configure"
+#line 9161 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
WINDOW *x
; return 0; }
EOF
-if { (eval echo configure:8757: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9174: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_term_header=$cf_header
break
cf_tr_func=`echo "$cf_func" | sed y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%`
echo $ac_n "checking for ${cf_func}""... $ac_c" 1>&6
-echo "configure:8837: checking for ${cf_func}" >&5
+echo "configure:9254: checking for ${cf_func}" >&5
-echo "${as_me-configure}:8839: testing ${cf_func} ..." 1>&5
+echo "${as_me-configure}:9256: testing ${cf_func} ..." 1>&5
if eval "test \"`echo '$''{'cf_cv_func_$cf_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
eval cf_result='$ac_cv_func_'$cf_func
if test ".$cf_result" != ".no"; then
cat > conftest.$ac_ext <<EOF
-#line 8848 "configure"
+#line 9265 "configure"
#include "confdefs.h"
#ifdef HAVE_XCURSES
; return 0; }
EOF
-if { (eval echo configure:8874: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_result=yes
else
echo $ac_n "checking for ncurses extended functions""... $ac_c" 1>&6
-echo "configure:8903: checking for ncurses extended functions" >&5
+echo "configure:9320: checking for ncurses extended functions" >&5
if eval "test \"`echo '$''{'cf_cv_ncurses_ext_funcs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8909 "configure"
+#line 9326 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
; return 0; }
EOF
-if { (eval echo configure:8919: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9336: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_ncurses_ext_funcs=defined
else
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 8928 "configure"
+#line 9345 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
(void) wresize (0, 0, 0);
; return 0; }
EOF
-if { (eval echo configure:8948: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9365: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_cv_ncurses_ext_funcs=yes
else
echo $ac_n "checking for wide-character functions""... $ac_c" 1>&6
-echo "configure:8972: checking for wide-character functions" >&5
+echo "configure:9389: checking for wide-character functions" >&5
if eval "test \"`echo '$''{'cf_cv_widechar_funcs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 8978 "configure"
+#line 9395 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
; return 0; }
EOF
-if { (eval echo configure:8990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9407: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_cv_widechar_funcs=yes
else
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:9017: checking for pid_t" >&5
+echo "configure:9434: checking for pid_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9022 "configure"
+#line 9439 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:9051: checking for vfork.h" >&5
+echo "configure:9468: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9056 "configure"
+#line 9473 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:9061: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:9478: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:9086: checking for working vfork" >&5
+echo "configure:9503: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:9092: checking for vfork" >&5
+echo "configure:9509: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9097 "configure"
+#line 9514 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:9120: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 9142 "configure"
+#line 9559 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:9237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
echo $ac_n "checking if sys/time.h works with sys/select.h""... $ac_c" 1>&6
-echo "configure:9261: checking if sys/time.h works with sys/select.h" >&5
+echo "configure:9678: checking if sys/time.h works with sys/select.h" >&5
if eval "test \"`echo '$''{'cf_cv_sys_time_select'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9267 "configure"
+#line 9684 "configure"
#include "confdefs.h"
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:9282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9699: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_sys_time_select=yes
else
echo $ac_n "checking for function curses_version""... $ac_c" 1>&6
-echo "configure:9303: checking for function curses_version" >&5
+echo "configure:9720: checking for function curses_version" >&5
if eval "test \"`echo '$''{'cf_cv_func_curses_version'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cf_cv_func_curses_version=unknown
else
cat > conftest.$ac_ext <<EOF
-#line 9312 "configure"
+#line 9729 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
}
EOF
-if { (eval echo configure:9324: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:9741: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
cf_cv_func_curses_version=yes
echo $ac_n "checking for ncurses wrap-prefix""... $ac_c" 1>&6
-echo "configure:9349: checking for ncurses wrap-prefix" >&5
+echo "configure:9766: checking for ncurses wrap-prefix" >&5
# Check whether --with-ncurses-wrap-prefix or --without-ncurses-wrap-prefix was given.
if test "${with_ncurses_wrap_prefix+set}" = set; then
echo $ac_n "checking for alternate character set array""... $ac_c" 1>&6
-echo "configure:9365: checking for alternate character set array" >&5
+echo "configure:9782: checking for alternate character set array" >&5
if eval "test \"`echo '$''{'cf_cv_curses_acs_map'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for name in acs_map _acs_map __acs_map ${NCURSES_WRAP_PREFIX}acs_map
do
cat > conftest.$ac_ext <<EOF
-#line 9374 "configure"
+#line 9791 "configure"
#include "confdefs.h"
#include <${cf_cv_ncurses_header-curses.h}>
; return 0; }
EOF
-if { (eval echo configure:9385: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_cv_curses_acs_map=$name; break
else
echo $ac_n "checking for wide alternate character set array""... $ac_c" 1>&6
-echo "configure:9406: checking for wide alternate character set array" >&5
+echo "configure:9823: checking for wide alternate character set array" >&5
if eval "test \"`echo '$''{'cf_cv_curses_wacs_map'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for name in wacs_map _wacs_map __wacs_map _nc_wacs
do
cat > conftest.$ac_ext <<EOF
-#line 9415 "configure"
+#line 9832 "configure"
#include "confdefs.h"
#ifndef _XOPEN_SOURCE_EXTENDED
$name['k'] = *WACS_PLUS
; return 0; }
EOF
-if { (eval echo configure:9426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:9843: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_cv_curses_wacs_map=$name
break
echo $ac_n "checking for type attr_t in ${cf_cv_ncurses_header-curses.h}""... $ac_c" 1>&6
-echo "configure:9443: checking for type attr_t in ${cf_cv_ncurses_header-curses.h}" >&5
+echo "configure:9860: checking for type attr_t in ${cf_cv_ncurses_header-curses.h}" >&5
cat > conftest.$ac_ext <<EOF
-#line 9445 "configure"
+#line 9862 "configure"
#include "confdefs.h"
#ifndef _XOPEN_SOURCE_EXTENDED
; return 0; }
EOF
-if { (eval echo configure:9458: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9875: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_result=yes
else
# This is needed on Tru64 5.0 to declare mbstate_t
echo $ac_n "checking if we must include wchar.h to declare mbstate_t""... $ac_c" 1>&6
-echo "configure:9488: checking if we must include wchar.h to declare mbstate_t" >&5
+echo "configure:9905: checking if we must include wchar.h to declare mbstate_t" >&5
if eval "test \"`echo '$''{'cf_cv_mbstate_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9494 "configure"
+#line 9911 "configure"
#include "confdefs.h"
#include <stdlib.h>
mbstate_t state
; return 0; }
EOF
-if { (eval echo configure:9507: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9924: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_mbstate_t=no
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 9515 "configure"
+#line 9932 "configure"
#include "confdefs.h"
#include <stdlib.h>
mbstate_t value
; return 0; }
EOF
-if { (eval echo configure:9529: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:9946: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_mbstate_t=yes
else
# This is needed on Tru64 5.0 to declare wchar_t
echo $ac_n "checking if we must include wchar.h to declare wchar_t""... $ac_c" 1>&6
-echo "configure:9569: checking if we must include wchar.h to declare wchar_t" >&5
+echo "configure:9986: checking if we must include wchar.h to declare wchar_t" >&5
if eval "test \"`echo '$''{'cf_cv_wchar_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9575 "configure"
+#line 9992 "configure"
#include "confdefs.h"
#include <stdlib.h>
wchar_t state
; return 0; }
EOF
-if { (eval echo configure:9588: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10005: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_wchar_t=no
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 9596 "configure"
+#line 10013 "configure"
#include "confdefs.h"
#include <stdlib.h>
wchar_t value
; return 0; }
EOF
-if { (eval echo configure:9610: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10027: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_wchar_t=yes
else
# This is needed on Tru64 5.0 to declare wint_t
echo $ac_n "checking if we must include wchar.h to declare wint_t""... $ac_c" 1>&6
-echo "configure:9650: checking if we must include wchar.h to declare wint_t" >&5
+echo "configure:10067: checking if we must include wchar.h to declare wint_t" >&5
if eval "test \"`echo '$''{'cf_cv_wint_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 9656 "configure"
+#line 10073 "configure"
#include "confdefs.h"
#include <stdlib.h>
wint_t state
; return 0; }
EOF
-if { (eval echo configure:9669: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10086: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_wint_t=no
else
cat conftest.$ac_ext >&5
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 9677 "configure"
+#line 10094 "configure"
#include "confdefs.h"
#include <stdlib.h>
wint_t value
; return 0; }
EOF
-if { (eval echo configure:9691: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10108: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_cv_wint_t=yes
else
if test "$NCURSES_OK_MBSTATE_T" = 0 ; then
echo $ac_n "checking for type mbstate_t in ${cf_cv_ncurses_header-curses.h}""... $ac_c" 1>&6
-echo "configure:9732: checking for type mbstate_t in ${cf_cv_ncurses_header-curses.h}" >&5
+echo "configure:10149: checking for type mbstate_t in ${cf_cv_ncurses_header-curses.h}" >&5
cat > conftest.$ac_ext <<EOF
-#line 9734 "configure"
+#line 10151 "configure"
#include "confdefs.h"
#ifndef _XOPEN_SOURCE_EXTENDED
; return 0; }
EOF
-if { (eval echo configure:9747: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10164: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_result=yes
else
if test "$NCURSES_OK_WCHAR_T" = 0 ; then
echo $ac_n "checking for type wchar_t in ${cf_cv_ncurses_header-curses.h}""... $ac_c" 1>&6
-echo "configure:9778: checking for type wchar_t in ${cf_cv_ncurses_header-curses.h}" >&5
+echo "configure:10195: checking for type wchar_t in ${cf_cv_ncurses_header-curses.h}" >&5
cat > conftest.$ac_ext <<EOF
-#line 9780 "configure"
+#line 10197 "configure"
#include "confdefs.h"
#ifndef _XOPEN_SOURCE_EXTENDED
; return 0; }
EOF
-if { (eval echo configure:9793: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10210: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_result=yes
else
if test "$NCURSES_OK_WINT_T" = 0 ; then
echo $ac_n "checking for type wint_t in ${cf_cv_ncurses_header-curses.h}""... $ac_c" 1>&6
-echo "configure:9824: checking for type wint_t in ${cf_cv_ncurses_header-curses.h}" >&5
+echo "configure:10241: checking for type wint_t in ${cf_cv_ncurses_header-curses.h}" >&5
cat > conftest.$ac_ext <<EOF
-#line 9826 "configure"
+#line 10243 "configure"
#include "confdefs.h"
#ifndef _XOPEN_SOURCE_EXTENDED
; return 0; }
EOF
-if { (eval echo configure:9839: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10256: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_result=yes
else
echo $ac_n "checking for data boolnames declaration in ${cf_cv_ncurses_header-curses.h}""... $ac_c" 1>&6
-echo "configure:9869: checking for data boolnames declaration in ${cf_cv_ncurses_header-curses.h}" >&5
+echo "configure:10286: checking for data boolnames declaration in ${cf_cv_ncurses_header-curses.h}" >&5
cat > conftest.$ac_ext <<EOF
-#line 9871 "configure"
+#line 10288 "configure"
#include "confdefs.h"
#ifdef HAVE_XCURSES
; return 0; }
EOF
-if { (eval echo configure:9894: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10311: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_result=yes
else
else
echo $ac_n "checking for data boolnames in library""... $ac_c" 1>&6
-echo "configure:9915: checking for data boolnames in library" >&5
+echo "configure:10332: checking for data boolnames in library" >&5
cat > conftest.$ac_ext <<EOF
-#line 9917 "configure"
+#line 10334 "configure"
#include "confdefs.h"
#ifdef HAVE_XCURSES
; return 0; }
EOF
-if { (eval echo configure:9944: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_result=yes
else
echo $ac_n "checking for data boolfnames declaration in ${cf_cv_ncurses_header-curses.h}""... $ac_c" 1>&6
-echo "configure:9968: checking for data boolfnames declaration in ${cf_cv_ncurses_header-curses.h}" >&5
+echo "configure:10385: checking for data boolfnames declaration in ${cf_cv_ncurses_header-curses.h}" >&5
cat > conftest.$ac_ext <<EOF
-#line 9970 "configure"
+#line 10387 "configure"
#include "confdefs.h"
#ifdef HAVE_XCURSES
; return 0; }
EOF
-if { (eval echo configure:9993: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:10410: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cf_result=yes
else
else
echo $ac_n "checking for data boolfnames in library""... $ac_c" 1>&6
-echo "configure:10014: checking for data boolfnames in library" >&5
+echo "configure:10431: checking for data boolfnames in library" >&5
cat > conftest.$ac_ext <<EOF
-#line 10016 "configure"
+#line 10433 "configure"
#include "confdefs.h"
#ifdef HAVE_XCURSES
; return 0; }
EOF
-if { (eval echo configure:10043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:10460: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cf_result=yes
else
s%@ECHO_CC@%$ECHO_CC%g
s%@EXTRA_CFLAGS@%$EXTRA_CFLAGS%g
s%@NCURSES_CONFIG@%$NCURSES_CONFIG%g
+s%@PKG_CONFIG@%$PKG_CONFIG%g
s%@X_CFLAGS@%$X_CFLAGS%g
s%@X_PRE_LIBS@%$X_PRE_LIBS%g
s%@X_LIBS@%$X_LIBS%g
projects / ncurses.git / blobdiff