- curses supports color attributes on terminals with that capability. To
- use these routines start_color must be called, usually right after
- initscr. Colors are always used in pairs (referred to as color-pairs).
- A color-pair consists of a foreground color (for characters) and a
- background color (for the blank field on which the characters are dis-
- played). A programmer initializes a color-pair with the routine
- init_pair. After it has been initialized, COLOR_PAIR(n) can be used to
+ curses supports color attributes on terminals with that capability. To
+ use these routines start_color must be called, usually right after
+ initscr. Colors are always used in pairs (referred to as color-pairs).
+ A color-pair consists of a foreground color (for characters) and a
+ background color (for the blank field on which the characters are dis-
+ played). A programmer initializes a color-pair with the routine
+ init_pair. After it has been initialized, COLOR_PAIR(n) can be used to
convert the pair to a video attribute.
- If a terminal is capable of redefining colors, the programmer can use
- the routine init_color to change the definition of a color. The rou-
- tines has_colors and can_change_color return TRUE or FALSE, depending
+ If a terminal is capable of redefining colors, the programmer can use
+ the routine init_color to change the definition of a color. The rou-
+ tines has_colors and can_change_color return TRUE or FALSE, depending
on whether the terminal has color capabilities and whether the program-
- mer can change the colors. The routine color_content allows a program-
- mer to extract the amounts of red, green, and blue components in an
- initialized color. The routine pair_content allows a programmer to
+ mer can change the colors. The routine color_content allows a program-
+ mer to extract the amounts of red, green, and blue components in an
+ initialized color. The routine pair_content allows a programmer to
find out how a given color-pair is currently defined.
- The curses library combines these inputs to produce the actual fore-
+ The curses library combines these inputs to produce the actual fore-
ground and background colors shown on the screen:
- o per-character video attributes (e.g., via waddch),
+ o per-character video attributes (e.g., via waddch),
- o the window attribute (e.g., by wattrset), and
+ o the window attribute (e.g., by wattrset), and
- o the background character (e.g., wbkgdset).
+ o the background character (e.g., wbkgdset).
Per-character and window attributes are usually set by a parameter con-
- taining video attributes including a color pair value. Some functions
- such as wattr_set use a separate parameter which is the color pair num-
+ taining video attributes including a color pair value. Some functions
+ such as wattr_set use a separate parameter which is the color pair num-
ber.
- The background character is a special case: it includes a character
- value, just as if it were passed to waddch.
+ The background character is a special case: it includes a character
+ value, just as if it were passed to waddch.
- The curses library does the actual work of combining these color pairs
- in an internal function called from waddch:
+ The curses library does the actual work of combining these color pairs
+ in an internal function called from waddch:
- o If the parameter passed to waddch is blank, and it uses the special
+ o If the parameter passed to waddch is blank, and it uses the special
color pair 0,
- ocurses next checks the window attribute.
+ ocurses next checks the window attribute.
- o If the window attribute does not use color pair 0, curses uses
+ o If the window attribute does not use color pair 0, curses uses
the color pair from the window attribute.
- o Otherwise, curses uses the background character.
+ o Otherwise, curses uses the background character.
- o If the parameter passed to waddch is notblank, or it does not use
- the special color pair 0, curses prefers the color pair from the
- parameter, if it is nonzero. Otherwise, it tries the window at-
- tribute next, and finally the background character.
+ o If the parameter passed to waddch is notblank, or it does not use
+ the special color pair 0, curses prefers the color pair from the
+ parameter, if it is nonzero. Otherwise, it tries the window attri-
+ bute next, and finally the background character.
- Some curses functions such as wprintw call waddch. Those do not com-
+ Some curses functions such as wprintw call waddch. Those do not com-
bine its parameter with a color pair. Consequently those calls use on-
ly the window attribute or the background character.
- In <curses.h> the following macros are defined. These are the standard
- colors (ISO-6429). curses also assumes that COLOR_BLACK is the default
+ In <curses.h> the following macros are defined. These are the standard
+ colors (ISO-6429). curses also assumes that COLOR_BLACK is the default
background color for all terminals.
- COLOR_BLACK
- COLOR_RED
- COLOR_GREEN
- COLOR_YELLOW
- COLOR_BLUE
- COLOR_MAGENTA
- COLOR_CYAN
- COLOR_WHITE
+ COLOR_BLACK
+ COLOR_RED
+ COLOR_GREEN
+ COLOR_YELLOW
+ COLOR_BLUE
+ COLOR_MAGENTA
+ COLOR_CYAN
+ COLOR_WHITE
- Some terminals support more than the eight (8) "ANSI" colors. There
+ Some terminals support more than the eight (8) "ANSI" colors. There
are no standard names for those additional colors.
- is initialized by start_color to the maximum number of colors the ter-
+ is initialized by start_color to the maximum number of colors the ter-
minal can support.
- is initialized by start_color to the maximum number of color pairs the
+ is initialized by start_color to the maximum number of color pairs the
terminal can support.
- The start_color routine requires no arguments. It must be called if
- the programmer wants to use colors, and before any other color manipu-
- lation routine is called. It is good practice to call this routine
- right after initscr. start_color does this:
+ The start_color routine requires no arguments. It must be called if
+ the programmer wants to use colors, and before any other color manipu-
+ lation routine is called. It is good practice to call this routine
+ right after initscr. start_color does this:
- o It initializes two global variables, COLORS and COLOR_PAIRS (re-
- spectively defining the maximum number of colors and color-pairs
+ o It initializes two global variables, COLORS and COLOR_PAIRS (re-
+ spectively defining the maximum number of colors and color-pairs
the terminal can support).
- o It initializes the special color pair 0 to the default foreground
+ o It initializes the special color pair 0 to the default foreground
and background colors. No other color pairs are initialized.
- o It restores the colors on the terminal to the values they had when
+ o It restores the colors on the terminal to the values they had when
the terminal was just turned on.
- o If the terminal supports the initc (initialize_color) capability,
- start_color initializes its internal table representing the red,
- green and blue components of the color palette.
+ o If the terminal supports the initc (initialize_color) capability,
+ start_color initializes its internal table representing the red,
+ green, and blue components of the color palette.
The components depend on whether the terminal uses CGA (aka "ANSI")
- or HLS (i.e., the hls (hue_lightness_saturation) capability is
- set). The table is initialized first for eight basic colors
- (black, red, green, yellow, blue, magenta, cyan, and white), and
- after that (if the terminal supports more than eight colors) the
- components are initialized to 1000.
-
- start_color does not attempt to set the terminal's color palette to
- match its built-in table. An application may use init_color to al-
+ or HLS (i.e., the hls (hue_lightness_saturation) capability is
+ set). The table is initialized first for eight basic colors
+ (black, red, green, yellow, blue, magenta, cyan, and white), using
+ weights that depend upon the CGA/HLS choice. For "ANSI" colors the
+ weights are 680 or 0 depending on whether the corresponding red,
+ green, or blue component is used or not. That permits using 1000
+ to represent bold/bright colors. After the initial eight colors
+ (if the terminal supports more than eight colors) the components
+ are initialized using the same pattern, but with weights of 1000.
+ SVr4 uses a similar scheme, but uses 1000 for the components of the
+ initial eight colors.
+
+ start_color does not attempt to set the terminal's color palette to
+ match its built-in table. An application may use init_color to al-
ter the internal table along with the terminal's color.
- These limits apply to color values and color pairs. Values outside
+ These limits apply to color values and color pairs. Values outside
these limits are not legal, and may result in a runtime error:
- oCOLORS corresponds to the terminal database's max_colors capabili-
- ty, (see terminfo(5)).
+ oCOLORS corresponds to the terminal database's max_colors capabili-
+ ty, (see terminfo(5)).
- o color values are expected to be in the range 0 to COLORS-1, inclu-
- sive (including 0 and COLORS-1).
+ o color values are expected to be in the range 0 to COLORS-1, inclu-
+ sive (including 0 and COLORS-1).
- o a special color value -1 is used in certain extended functions to
- denote the defaultcolor (see use_default_colors).
+ o a special color value -1 is used in certain extended functions to
+ denote the defaultcolor (see use_default_colors(3X)).
- oCOLOR_PAIRS corresponds to the terminal database's max_pairs capa-
- bility, (see terminfo(5)).
+ oCOLOR_PAIRS corresponds to the terminal database's max_pairs capa-
+ bility, (see terminfo(5)).
- o legal color pair values are in the range 1 to COLOR_PAIRS-1, inclu-
+ o legal color pair values are in the range 1 to COLOR_PAIRS-1, inclu-
sive.
- o color pair 0 is special; it denotes "no color".
+ o color pair 0 is special; it denotes "no color".
- Color pair 0 is assumed to be white on black, but is actually what-
- ever the terminal implements before color is initialized. It can-
+ Color pair 0 is assumed to be white on black, but is actually what-
+ ever the terminal implements before color is initialized. It can-
not be modified by the application.
- The has_colors routine requires no arguments. It returns TRUE if the
- terminal can manipulate colors; otherwise, it returns FALSE. This rou-
+ The has_colors routine requires no arguments. It returns TRUE if the
+ terminal can manipulate colors; otherwise, it returns FALSE. This rou-
tine facilitates writing terminal-independent programs. For example, a
- programmer can use it to decide whether to use color or some other
+ programmer can use it to decide whether to use color or some other
video attribute.
- The can_change_color routine requires no arguments. It returns TRUE if
- the terminal supports colors and can change their definitions; other,
- it returns FALSE. This routine facilitates writing terminal-indepen-
+ The can_change_color routine requires no arguments. It returns TRUE if
+ the terminal supports colors and can change their definitions; other,
+ it returns FALSE. This routine facilitates writing terminal-indepen-
dent programs.
- The init_pair routine changes the definition of a color-pair. It takes
- three arguments: the number of the color-pair to be changed, the fore-
+ The init_pair routine changes the definition of a color-pair. It takes
+ three arguments: the number of the color-pair to be changed, the fore-
ground color number, and the background color number. For portable ap-
plications:
- o The first argument must be a legal color pair value. If default
- colors are used (see use_default_colors) the upper limit is adjust-
- ed to allow for extra pairs which use a default color in foreground
- and/or background.
+ o The first argument must be a legal color pair value. If default
+ colors are used (see use_default_colors(3X)) the upper limit is ad-
+ justed to allow for extra pairs which use a default color in fore-
+ ground and/or background.
- o The second and third arguments must be legal color values.
+ o The second and third arguments must be legal color values.
- If the color-pair was previously initialized, the screen is refreshed
- and all occurrences of that color-pair are changed to the new defini-
+ If the color-pair was previously initialized, the screen is refreshed
+ and all occurrences of that color-pair are changed to the new defini-
tion.
- As an extension, ncurses allows you to set color pair 0 via the as-
- sume_default_colors(3x) routine, or to specify the use of default col-
- ors (color number -1) if you first invoke the use_default_colors(3x)
+ As an extension, ncurses allows you to set color pair 0 via the as-
+ sume_default_colors(3X) routine, or to specify the use of default col-
+ ors (color number -1) if you first invoke the use_default_colors(3X)
routine.
- The extension reset_color_pairs tells ncurses to discard all of the
- color-pair information which was set with init_pair. It also touches
- the current- and standard-screens, allowing an application to switch
- color palettes rapidly.
+
+
+ Because init_pair uses signed shorts for its parameters, that limits
+ color-pairs and color-values to 32767 on modern hardware. The exten-
+ sion init_extended_pair uses ints for the color-pair and color-value,
+ allowing a larger number of colors to be supported.
- The init_color routine changes the definition of a color. It takes
+ The init_color routine changes the definition of a color. It takes
four arguments: the number of the color to be changed followed by three
RGB values (for the amounts of red, green, and blue components).
- o The first argument must be a legal color value; default colors are
- not allowed here. (See the section Colors for the default color
+ o The first argument must be a legal color value; default colors are
+ not allowed here. (See the section Colors for the default color
index.)
- o Each of the last three arguments must be a value in the range 0
- through 1000.
+ o Each of the last three arguments must be a value in the range 0
+ through 1000.
- When init_color is used, all occurrences of that color on the screen
+ When init_color is used, all occurrences of that color on the screen
immediately change to the new definition.
+
+ Because init_color uses signed shorts for its parameters, that limits
+ color-values and their red, green, and blue components to 32767 on mod-
+ ern hardware. The extension init_extended_color uses ints for the col-
+ or value and for setting the red, green, and blue components, allowing
+ a larger number of colors to be supported.
+
+
- The color_content routine gives programmers a way to find the intensity
- of the red, green, and blue (RGB) components in a color. It requires
- four arguments: the color number, and three addresses of shorts for
- storing the information about the amounts of red, green, and blue com-
+ The color_content routine gives programmers a way to find the intensity
+ of the red, green, and blue (RGB) components in a color. It requires
+ four arguments: the color number, and three addresses of shorts for
+ storing the information about the amounts of red, green, and blue com-
ponents in the given color.
- o The first argument must be a legal color value, i.e., 0 through
- COLORS-1, inclusive.
+ o The first argument must be a legal color value, i.e., 0 through
+ COLORS-1, inclusive.
- o The values that are stored at the addresses pointed to by the last
- three arguments are in the range 0 (no component) through 1000
+ o The values that are stored at the addresses pointed to by the last
+ three arguments are in the range 0 (no component) through 1000
(maximum amount of component), inclusive.
+
+ Because color_content uses signed shorts for its parameters, that lim-
+ its color-values and their red, green, and blue components to 32767 on
+ modern hardware. The extension extended_color_content uses ints for
+ the color value and for returning the red, green, and blue components,
+ allowing a larger number of colors to be supported.
+
+
- The pair_content routine allows programmers to find out what colors a
- given color-pair consists of. It requires three arguments: the color-
- pair number, and two addresses of shorts for storing the foreground and
+ The pair_content routine allows programmers to find out what colors a
+ given color-pair consists of. It requires three arguments: the color-
+ pair number, and two addresses of shorts for storing the foreground and
the background color numbers.
- o The first argument must be a legal color value, i.e., in the range
- 1 through COLOR_PAIRS-1, inclusive.
+ o The first argument must be a legal color value, i.e., in the range
+ 1 through COLOR_PAIRS-1, inclusive.
- o The values that are stored at the addresses pointed to by the sec-
- ond and third arguments are in the range 0 through COLORS, inclu-
+ o The values that are stored at the addresses pointed to by the sec-
+ ond and third arguments are in the range 0 through COLORS, inclu-
sive.
+
+ Because pair_content uses signed shorts for its parameters, that limits
+ color-pair and color-values to 32767 on modern hardware. The extension
+ extended_pair_content uses ints for the color pair and for returning
+ the foreground and background colors, allowing a larger number of col-
+ ors to be supported.
+
+
+
+ The extension reset_color_pairs tells ncurses to discard all of the
+ color-pair information which was set with init_pair. It also touches
+ the current- and standard-screens, allowing an application to switch
+ color palettes rapidly.
+
+
- PAIR_NUMBER(attrs) extracts the color value from its attrs parameter
+ PAIR_NUMBER(attrs) extracts the color value from its attrs parameter
and returns it as a color pair number.
- Its inverse COLOR_PAIR(n) converts a color pair number to an attribute.
+ Its inverse COLOR_PAIR(n) converts a color pair number to an attribute.
Attributes can hold color pairs in the range 0 to 255. If you need a
- color pair larger than that, you must use functions such as attr_set
+ color pair larger than that, you must use functions such as attr_set
(which pass the color pair as a separate parameter) rather than the
- legacy functions such as attrset.
+ legacy functions such as attrset.
- The routines can_change_color and has_colors return TRUE or FALSE.
+ The routines can_change_color and has_colors return TRUE or FALSE.
- All other routines return the integer ERR upon failure and an OK (SVr4
- specifies only "an integer value other than ERR") upon successful com-
+ All other routines return the integer ERR upon failure and an OK (SVr4
+ specifies only "an integer value other than ERR") upon successful com-
pletion.
- X/Open defines no error conditions. This implementation will return
- ERR on attempts to use color values outside the range 0 to COLORS-1
- (except for the default colors extension), or use color pairs outside
- the range 0 to COLOR_PAIRS-1. Color values used in init_color must be
- in the range 0 to 1000. An error is returned from all functions if the
- terminal has not been initialized. An error is returned from secondary
- functions such as init_pair if start_color was not called.
+ X/Open defines no error conditions. SVr4 does document some error con-
+ ditions which apply in general:
+
+ o This implementation will return ERR on attempts to use color values
+ outside the range 0 to COLORS-1 (except for the default colors ex-
+ tension), or use color pairs outside the range 0 to COLOR_PAIRS-1.
+
+ Color values used in init_color must be in the range 0 to 1000.
+
+ An error is returned from all functions if the terminal has not
+ been initialized.
+
+ An error is returned from secondary functions such as init_pair if
+ start_color was not called.
+
+ o SVr4 does much the same, except that it returns ERR from pair_con-
+ tent if the pair was not initialized using init_pairs and it re-
+ turns ERR from color_content if the terminal does not support
+ changing colors.
+
+ This implementation does not return ERR for either case.
+
+ Specific functions make additional checks:
- init_color
+ init_color
returns an error if the terminal does not support this feature,
- e.g., if the initialize_color capability is absent from the
+ e.g., if the initialize_color capability is absent from the
terminal description.
- start_color
+ start_color
returns an error if the color table cannot be allocated.
- In the ncurses implementation, there is a separate color activation
- flag, color palette, color pairs table, and associated COLORS and COL-
- OR_PAIRS counts for each screen; the start_color function only affects
+ In the ncurses implementation, there is a separate color activation
+ flag, color palette, color pairs table, and associated COLORS and COL-
+ OR_PAIRS counts for each screen; the start_color function only affects
the current screen. The SVr4/XSI interface is not really designed with
this in mind, and historical implementations may use a single shared
color palette.
@@ -365,57 +422,57 @@
Setting an implicit background color via a color pair affects only
character cells that a character write operation explicitly touches.
To change the background color used when parts of a window are blanked
- by erasing or scrolling operations, see curs_bkgd(3x).
+ by erasing or scrolling operations, see curs_bkgd(3X).
Several caveats apply on older x86 machines (e.g., i386, i486) with
VGA-compatible graphics:
- o COLOR_YELLOW is actually brown. To get yellow, use COLOR_YELLOW
- combined with the A_BOLD attribute.
+ o COLOR_YELLOW is actually brown. To get yellow, use COLOR_YELLOW
+ combined with the A_BOLD attribute.
- o The A_BLINK attribute should in theory cause the background to go
+ o The A_BLINK attribute should in theory cause the background to go
bright. This often fails to work, and even some cards for which it
mostly works (such as the Paradise and compatibles) do the wrong
thing when you try to set a bright "yellow" background (you get a
blinking yellow foreground instead).
- o Color RGB values are not settable.
+ o Color RGB values are not settable.
- This implementation satisfies XSI Curses's minimum maximums for COLORS
- and COLOR_PAIRS.
+ This implementation satisfies XSI Curses's minimum maximums for COLORS
+ and COLOR_PAIRS.
- The init_pair routine accepts negative values of foreground and back-
- ground color to support the use_default_colors(3x) extension, but only
+ The init_pair routine accepts negative values of foreground and back-
+ ground color to support the use_default_colors(3X) extension, but only
if that routine has been first invoked.
- The assumption that COLOR_BLACK is the default background color for all
- terminals can be modified using the assume_default_colors(3x) exten-
+ The assumption that COLOR_BLACK is the default background color for all
+ terminals can be modified using the assume_default_colors(3X) exten-
sion.
This implementation checks the pointers, e.g., for the values returned
- by color_content and pair_content, and will treat those as optional pa-
+ by color_content and pair_content, and will treat those as optional pa-
rameters when null.
X/Open Curses does not specify a limit for the number of colors and
- color pairs which a terminal can support. However, in its use of short
+ color pairs which a terminal can support. However, in its use of short
for the parameters, it carries over SVr4's implementation detail for
the compiled terminfo database, which uses signed 16-bit numbers. This
implementation provides extended versions of those functions which use
- short parameters, allowing applications to use larger color- and pair-
+ short parameters, allowing applications to use larger color- and pair-
numbers.
- The reset_color_pairs function is an extension of ncurses.
+ The reset_color_pairs function is an extension of ncurses.