X-Git-Url: https://ncurses.scripts.mit.edu/?p=ncurses.git;a=blobdiff_plain;f=doc%2Fhtml%2Fman%2Fncurses.3x.html;h=0d17ec0fa4ebb37fc45df64a4f60239c94286966;hp=8b1dee843247a8907e220114fabf8401d17d93d8;hb=77afe78361875f531dc2bf8d73f2e781c8e76176;hpb=40cf934fff2d2790c060619e3a29bd54c20994b0 diff --git a/doc/html/man/ncurses.3x.html b/doc/html/man/ncurses.3x.html index 8b1dee84..0d17ec0f 100644 --- a/doc/html/man/ncurses.3x.html +++ b/doc/html/man/ncurses.3x.html @@ -2,7 +2,7 @@
@@ -63,7 +63,7 @@ sonable optimization. This implementation is ``new curses'' (ncurses) and is the approved replacement for 4.4BSD classic curses, which has been discontinued. This - describes ncurses version 5.6 (patch 20081011). + describes ncurses version 5.7 (patch 20100109). The ncurses library emulates the curses(3x) library of System V Release 4 UNIX, and XPG4 (X/Open Portability @@ -150,48 +150,48 @@ Among those, the most basic routines are move and addch. More general versions of these routines are included with names beginning with w, allowing the user to specify a - window. The routines not beginning with w affect stdscr. + window. The routines not beginning with w affect stdscr. - After using routines to manipulate a window, refresh is - called, telling curses to make the user's CRT screen look - like stdscr. The characters in a window are actually of - type chtype, (character and attribute data) so that other - information about the character may also be stored with + After using routines to manipulate a window, refresh is + called, telling curses to make the user's CRT screen look + like stdscr. The characters in a window are actually of + type chtype, (character and attribute data) so that other + information about the character may also be stored with each character. - Special windows called pads may also be manipulated. + Special windows called pads may also be manipulated. These are windows which are not constrained to the size of - the screen and whose contents need not be completely dis- + the screen and whose contents need not be completely dis- played. See curs_pad(3x) for more information. - In addition to drawing characters on the screen, video - attributes and colors may be supported, causing the char- - acters to show up in such modes as underlined, in reverse - video, or in color on terminals that support such display + In addition to drawing characters on the screen, video + attributes and colors may be supported, causing the char- + acters to show up in such modes as underlined, in reverse + video, or in color on terminals that support such display enhancements. Line drawing characters may be specified to - be output. On input, curses is also able to translate - arrow and function keys that transmit escape sequences - into single values. The video attributes, line drawing - characters, and input values use names, defined in + be output. On input, curses is also able to translate + arrow and function keys that transmit escape sequences + into single values. The video attributes, line drawing + characters, and input values use names, defined in <curses.h>, such as A_REVERSE, ACS_HLINE, and KEY_LEFT. If the environment variables LINES and COLUMNS are set, or - if the program is executing in a window environment, line - and column information in the environment will override + if the program is executing in a window environment, line + and column information in the environment will override information read by terminfo. This would affect a program - running in an AT&T 630 layer, for example, where the size + running in an AT&T 630 layer, for example, where the size of a screen is changeable (see ENVIRONMENT). - If the environment variable TERMINFO is defined, any pro- - gram using curses checks for a local terminal definition - before checking in the standard place. For example, if + If the environment variable TERMINFO is defined, any pro- + gram using curses checks for a local terminal definition + before checking in the standard place. For example, if TERM is set to att4424, then the compiled terminal defini- tion is found in /usr/share/terminfo/a/att4424. (The a is copied from the first letter of att4424 to avoid - creation of huge directories.) However, if TERMINFO is + creation of huge directories.) However, if TERMINFO is set to $HOME/myterms, curses first checks $HOME/myterms/a/att4424, @@ -200,115 +200,115 @@ /usr/share/terminfo/a/att4424. - This is useful for developing experimental definitions or + This is useful for developing experimental definitions or when write permission in /usr/share/terminfo is not avail- able. - The integer variables LINES and COLS are defined in - <curses.h> and will be filled in by initscr with the size + The integer variables LINES and COLS are defined in + <curses.h> and will be filled in by initscr with the size of the screen. The constants TRUE and FALSE have the val- ues 1 and 0, respectively. - The curses routines also define the WINDOW * variable + The curses routines also define the WINDOW * variable curscr which is used for certain low-level operations like - clearing and redrawing a screen containing garbage. The + clearing and redrawing a screen containing garbage. The curscr can be used in only a few routines. Routine and Argument Names - Many curses routines have two or more versions. The rou- + Many curses routines have two or more versions. The rou- tines prefixed with w require a window argument. The rou- tines prefixed with p require a pad argument. Those with- out a prefix generally use stdscr. The routines prefixed with mv require a y and x coordinate - to move to before performing the appropriate action. The - mv routines imply a call to move before the call to the - other routine. The coordinate y always refers to the row - (of the window), and x always refers to the column. The + to move to before performing the appropriate action. The + mv routines imply a call to move before the call to the + other routine. The coordinate y always refers to the row + (of the window), and x always refers to the column. The upper left-hand corner is always (0,0), not (1,1). The routines prefixed with mvw take both a window argument - and x and y coordinates. The window argument is always + and x and y coordinates. The window argument is always specified before the coordinates. - In each case, win is the window affected, and pad is the + In each case, win is the window affected, and pad is the pad affected; win and pad are always pointers to type WIN- DOW. Option setting routines require a Boolean flag bf with the - value TRUE or FALSE; bf is always of type bool. Most of - the data types used in the library routines, such as WIN- - DOW, SCREEN, bool, and chtype are defined in <curses.h>. - Types used for the terminfo routines such as TERMINAL are + value TRUE or FALSE; bf is always of type bool. Most of + the data types used in the library routines, such as WIN- + DOW, SCREEN, bool, and chtype are defined in <curses.h>. + Types used for the terminfo routines such as TERMINAL are defined in <term.h>. - This manual page describes functions which may appear in - any configuration of the library. There are two common + This manual page describes functions which may appear in + any configuration of the library. There are two common configurations of the library: ncurses the "normal" library, which handles 8-bit characters. The normal (8-bit) library stores - characters combined with attributes in chtype + characters combined with attributes in chtype data. - Attributes alone (no corresponding character) - may be stored in chtype or the equivalent - attr_t data. In either case, the data is + Attributes alone (no corresponding character) + may be stored in chtype or the equivalent + attr_t data. In either case, the data is stored in something like an integer. - Each cell (row and column) in a WINDOW is + Each cell (row and column) in a WINDOW is stored as a chtype. ncursesw - the so-called "wide" library, which handles - multibyte characters (See the section on + the so-called "wide" library, which handles + multibyte characters (See the section on ALTERNATE CONFIGURATIONS). The "wide" library - includes all of the calls from the "normal" - library. It adds about one third more calls + includes all of the calls from the "normal" + library. It adds about one third more calls using data types which store multibyte charac- ters: cchar_t - corresponds to chtype. However it is a - structure, because more data is stored - than can fit into an integer. The char- + corresponds to chtype. However it is a + structure, because more data is stored + than can fit into an integer. The char- acters are large enough to require a full - integer value - and there may be more - than one character per cell. The video - attributes and color are stored in sepa- + integer value - and there may be more + than one character per cell. The video + attributes and color are stored in sepa- rate fields of the structure. Each cell (row and column) in a WINDOW is stored as a cchar_t. wchar_t - stores a "wide" character. Like chtype, + stores a "wide" character. Like chtype, this may be an integer. wint_t - stores a wchar_t or WEOF - not the same, + stores a wchar_t or WEOF - not the same, though both may have the same size. The "wide" library provides new functions - which are analogous to functions in the "nor- - mal" library. There is a naming convention - which relates many of the normal/wide vari- - ants: a "_w" is inserted into the name. For + which are analogous to functions in the "nor- + mal" library. There is a naming convention + which relates many of the normal/wide vari- + ants: a "_w" is inserted into the name. For example, waddch becomes wadd_wch. - Routine Name Index The following table lists each curses routine and the name - of the manual page on which it is described. Routines - flagged with `*' are ncurses-specific, not described by + of the manual page on which it is described. Routines + flagged with `*' are ncurses-specific, not described by XPG4 or present in SVr4. - curses Routine Name Manual Page Name -------------------------------------------- COLOR_PAIR curs_color(3x) PAIR_NUMBER curs_attr(3x) + _nc_free_and_exit curs_memleaks(3x)* + _nc_freeall curs_memleaks(3x)* _nc_tracebits curs_trace(3x)* _traceattr curs_trace(3x)* @@ -750,14 +750,14 @@- Routines that return an integer return ERR upon failure - and an integer value other than ERR upon successful com- - pletion, unless otherwise noted in the routine descrip- + Routines that return an integer return ERR upon failure + and an integer value other than ERR upon successful com- + pletion, unless otherwise noted in the routine descrip- tions. - All macros return the value of the w version, except + All macros return the value of the w version, except setscrreg, wsetscrreg, getyx, getbegyx, and getmaxyx. The - return values of setscrreg, wsetscrreg, getyx, getbegyx, + return values of setscrreg, wsetscrreg, getyx, getbegyx, and getmaxyx are undefined (i.e., these should not be used as the right-hand side of assignment statements). @@ -771,18 +771,23 @@ important ones have been already discussed in detail. BAUDRATE - The debugging library checks this environment symbol + The debugging library checks this environment symbol when the application has redirected output to a file. - The symbol's numeric value is used for the baudrate. + The symbol's numeric value is used for the baudrate. If no value is found, ncurses uses 9600. This allows - testers to construct repeatable test-cases that take + testers to construct repeatable test-cases that take into account costs that depend on baudrate. CC When set, change occurrences of the command_character - (i.e., the cmdch capability) of the loaded terminfo - entries to the value of this symbol. Very few ter- + (i.e., the cmdch capability) of the loaded terminfo + entries to the value of this symbol. Very few ter- minfo entries provide this feature. + Because this name is also used in development envi- + ronments to represent the C compiler's name, ncurses + ignores it if it does not happen to be a single char- + acter. + COLUMNS Specify the width of the screen in characters. Applications running in a windowing environment usu- @@ -851,11 +856,11 @@ LINES Like COLUMNS, specify the height of the screen in - characters. See COLUMNS for a detailed description. + characters. See COLUMNS for a detailed description. MOUSE_BUTTONS_123 This applies only to the OS/2 EMX port. It specifies - the order of buttons on the mouse. OS/2 numbers a + the order of buttons on the mouse. OS/2 numbers a 3-button mouse inconsistently from other platforms: 1 = left @@ -863,136 +868,137 @@ 3 = middle. This symbol lets you customize the mouse. The symbol - must be three numeric digits 1-3 in any order, e.g., - 123 or 321. If it is not specified, ncurses uses + must be three numeric digits 1-3 in any order, e.g., + 123 or 321. If it is not specified, ncurses uses 132. NCURSES_ASSUMED_COLORS - Override the compiled-in assumption that the termi- - nal's default colors are white-on-black (see - default_colors(3x)). You may set the foreground and - background color values with this environment vari- - able by proving a 2-element list: foreground,back- - ground. For example, to tell ncurses to not assume - anything about the colors, set this to "-1,-1". To - make it green-on-black, set it to "2,0". Any posi- + Override the compiled-in assumption that the termi- + nal's default colors are white-on-black (see + default_colors(3x)). You may set the foreground and + background color values with this environment vari- + able by proving a 2-element list: foreground,back- + ground. For example, to tell ncurses to not assume + anything about the colors, set this to "-1,-1". To + make it green-on-black, set it to "2,0". Any posi- tive value from zero to the terminfo max_colors value is allowed. NCURSES_GPM_TERMS - This applies only to ncurses configured to use the + This applies only to ncurses configured to use the GPM interface. If present, the environment variable is a list of one - or more terminal names against which the TERM envi- - ronment variable is matched. Setting it to an empty - value disables the GPM interface; using the built-in + or more terminal names against which the TERM envi- + ronment variable is matched. Setting it to an empty + value disables the GPM interface; using the built-in support for xterm, etc. - If the environment variable is absent, ncurses will + If the environment variable is absent, ncurses will attempt to open GPM if TERM contains "linux". NCURSES_NO_HARD_TABS - Ncurses may use tabs as part of the cursor movement - optimization. In some cases, your terminal driver - may not handle these properly. Set this environment + Ncurses may use tabs as part of the cursor movement + optimization. In some cases, your terminal driver + may not handle these properly. Set this environment variable to disable the feature. You can also adjust your stty settings to avoid the problem. NCURSES_NO_MAGIC_COOKIES Some terminals use a magic-cookie feature which - requires special handling to make highlighting and - other video attributes display properly. You can - suppress the highlighting entirely for these termi- + requires special handling to make highlighting and + other video attributes display properly. You can + suppress the highlighting entirely for these termi- nals by setting this environment variable. NCURSES_NO_PADDING - Most of the terminal descriptions in the terminfo - database are written for real "hardware" terminals. - Many people use terminal emulators which run in a - windowing environment and use curses-based - applications. Terminal emulators can duplicate all - of the important aspects of a hardware terminal, but - they do not have the same limitations. The chief - limitation of a hardware terminal from the standpoint - of your application is the management of dataflow, - i.e., timing. Unless a hardware terminal is inter- - faced into a terminal concentrator (which does flow - control), it (or your application) must manage - dataflow, preventing overruns. The cheapest solution - (no hardware cost) is for your program to do this by - pausing after operations that the terminal does - slowly, such as clearing the display. - - As a result, many terminal descriptions (including - the vt100) have delay times embedded. You may wish - to use these descriptions, but not want to pay the + Most of the terminal descriptions in the terminfo + database are written for real "hardware" terminals. + Many people use terminal emulators which run in a + windowing environment and use curses-based applica- + tions. Terminal emulators can duplicate all of the + important aspects of a hardware terminal, but they do + not have the same limitations. The chief limitation + of a hardware terminal from the standpoint of your + application is the management of dataflow, i.e., tim- + ing. Unless a hardware terminal is interfaced into a + terminal concentrator (which does flow control), it + (or your application) must manage dataflow, prevent- + ing overruns. The cheapest solution (no hardware + cost) is for your program to do this by pausing after + operations that the terminal does slowly, such as + clearing the display. + + As a result, many terminal descriptions (including + the vt100) have delay times embedded. You may wish + to use these descriptions, but not want to pay the performance penalty. - Set the NCURSES_NO_PADDING symbol to disable all but - mandatory padding. Mandatory padding is used as a + Set the NCURSES_NO_PADDING symbol to disable all but + mandatory padding. Mandatory padding is used as a part of special control sequences such as flash. NCURSES_NO_SETBUF - Normally ncurses enables buffered output during ter- - minal initialization. This is done (as in SVr4 - curses) for performance reasons. For testing pur- + Normally ncurses enables buffered output during ter- + minal initialization. This is done (as in SVr4 + curses) for performance reasons. For testing pur- poses, both of ncurses and certain applications, this feature is made optional. Setting the NCURSES_NO_SETBUF variable disables output buffering, - leaving the output in the original (usually line + leaving the output in the original (usually line buffered) mode. NCURSES_NO_UTF8_ACS During initialization, the ncurses library checks for - special cases where VT100 line-drawing (and the cor- - responding alternate character set capabilities) - described in the terminfo are known to be missing. - Specifically, when running in a UTF-8 locale, the - Linux console emulator and the GNU screen program - ignore these. Ncurses checks the TERM environment - variable for these. For other special cases, you - should set this environment variable. Doing this - tells ncurses to use Unicode values which correspond + special cases where VT100 line-drawing (and the cor- + responding alternate character set capabilities) + described in the terminfo are known to be missing. + Specifically, when running in a UTF-8 locale, the + Linux console emulator and the GNU screen program + ignore these. Ncurses checks the TERM environment + variable for these. For other special cases, you + should set this environment variable. Doing this + tells ncurses to use Unicode values which correspond to the VT100 line-drawing glyphs. That works for the special cases cited, and is likely to work for termi- nal emulators. - When setting this variable, you should set it to a - nonzero value. Setting it to zero (or to a nonnum- - ber) disables the special check for Linux and screen. + When setting this variable, you should set it to a + nonzero value. Setting it to zero (or to a nonnum- + ber) disables the special check for "linux" and + "screen". NCURSES_TRACE - During initialization, the ncurses debugging library - checks the NCURSES_TRACE symbol. If it is defined, + During initialization, the ncurses debugging library + checks the NCURSES_TRACE symbol. If it is defined, to a numeric value, ncurses calls the trace function, using that value as the argument. - The argument values, which are defined in curses.h, - provide several types of information. When running - with traces enabled, your application will write the + The argument values, which are defined in curses.h, + provide several types of information. When running + with traces enabled, your application will write the file trace to the current directory. - TERM Denotes your terminal type. Each terminal type is + TERM Denotes your terminal type. Each terminal type is distinct, though many are similar. TERMCAP If the ncurses library has been configured with term- - cap support, ncurses will check for a terminal's + cap support, ncurses will check for a terminal's description in termcap form if it is not available in the terminfo database. - The TERMCAP symbol contains either a terminal - description (with newlines stripped out), or a file - name telling where the information denoted by the - TERM symbol exists. In either case, setting it - directs ncurses to ignore the usual place for this + The TERMCAP symbol contains either a terminal + description (with newlines stripped out), or a file + name telling where the information denoted by the + TERM symbol exists. In either case, setting it + directs ncurses to ignore the usual place for this information, e.g., /etc/termcap. TERMINFO Overrides the directory in which ncurses searches for your terminal description. This is the simplest, but - not the only way to change the list of directories. + not the only way to change the list of directories. The complete list of directories in order follows: - the last directory to which ncurses wrote, if any, @@ -1009,57 +1015,57 @@ /usr/share/terminfo TERMINFO_DIRS - Specifies a list of directories to search for termi- - nal descriptions. The list is separated by colons - (i.e., ":") on Unix, semicolons on OS/2 EMX. All of + Specifies a list of directories to search for termi- + nal descriptions. The list is separated by colons + (i.e., ":") on Unix, semicolons on OS/2 EMX. All of the terminal descriptions are in terminfo form, which - makes a subdirectory named for the first letter of + makes a subdirectory named for the first letter of the terminal names therein. TERMPATH - If TERMCAP does not hold a file name then ncurses - checks the TERMPATH symbol. This is a list of file- - names separated by spaces or colons (i.e., ":") on + If TERMCAP does not hold a file name then ncurses + checks the TERMPATH symbol. This is a list of file- + names separated by spaces or colons (i.e., ":") on Unix, semicolons on OS/2 EMX. If the TERMPATH symbol - is not set, ncurses looks in the files /etc/termcap, - /usr/share/misc/termcap and $HOME/.termcap, in that + is not set, ncurses looks in the files /etc/termcap, + /usr/share/misc/termcap and $HOME/.termcap, in that order. - The library may be configured to disregard the following - variables when the current user is the superuser (root), - or if the application uses setuid or setgid permissions: + The library may be configured to disregard the following + variables when the current user is the superuser (root), + or if the application uses setuid or setgid permissions: $TERMINFO, $TERMINFO_DIRS, $TERMPATH, as well as $HOME.
- Several different configurations are possible, depending - on the configure script options used when building - ncurses. There are a few main options whose effects are + Several different configurations are possible, depending + on the configure script options used when building + ncurses. There are a few main options whose effects are visible to the applications developer using ncurses: --disable-overwrite - The standard include for ncurses is as noted in SYN- + The standard include for ncurses is as noted in SYN- OPSIS: #include <curses.h> - This option is used to avoid filename conflicts when - ncurses is not the main implementation of curses of - the computer. If ncurses is installed disabling - overwrite, it puts its headers in a subdirectory, + This option is used to avoid filename conflicts when + ncurses is not the main implementation of curses of + the computer. If ncurses is installed disabling + overwrite, it puts its headers in a subdirectory, e.g., #include <ncurses/curses.h> - It also omits a symbolic link which would allow you + It also omits a symbolic link which would allow you to use -lcurses to build executables. --enable-widec - The configure script renames the library and (if the - --disable-overwrite option is used) puts the header + The configure script renames the library and (if the + --disable-overwrite option is used) puts the header files in a different subdirectory. All of the - library names have a "w" appended to them, i.e., + library names have a "w" appended to them, i.e., instead of -lncurses @@ -1069,16 +1075,16 @@ -lncursesw You must also define _XOPEN_SOURCE_EXTENDED when com- - piling for the wide-character library to use the - extended (wide-character) functions. The curses.h - file which is installed for the wide-character - library is designed to be compatible with the normal + piling for the wide-character library to use the + extended (wide-character) functions. The curses.h + file which is installed for the wide-character + library is designed to be compatible with the normal library's header. Only the size of the WINDOW struc- - ture differs, and very few applications require more - than a pointer to WINDOWs. If the headers are - installed allowing overwrite, the wide-character - library's headers should be installed last, to allow - applications to be built using either library from + ture differs, and very few applications require more + than a pointer to WINDOWs. If the headers are + installed allowing overwrite, the wide-character + library's headers should be installed last, to allow + applications to be built using either library from the same set of headers. --with-shared @@ -1088,16 +1094,16 @@ --with-debug --with-profile - The shared and normal (static) library names differ - by their suffixes, e.g., libncurses.so and libn- - curses.a. The debug and profiling libraries add a + The shared and normal (static) library names differ + by their suffixes, e.g., libncurses.so and libn- + curses.a. The debug and profiling libraries add a "_g" and a "_p" to the root names respectively, e.g., libncurses_g.a and libncurses_p.a. --with-trace - The trace function normally resides in the debug + The trace function normally resides in the debug library, but it is sometimes useful to configure this - in the shared library. Configure scripts should + in the shared library. Configure scripts should check for the function's existence rather than assum- ing it is always in the debug library. @@ -1105,14 +1111,14 @@
/usr/share/tabset - directory containing initialization files for the + directory containing initialization files for the terminal capability database /usr/share/terminfo ter- minal capability database
- terminfo(5) and related pages whose names begin "curs_" + terminfo(5) and related pages whose names begin "curs_" for detailed routine descriptions. @@ -1121,103 +1127,103 @@ The ncurses library can be compiled with an option (-DUSE_GETCAP) that falls back to the old-style /etc/term- cap file if the terminal setup code cannot find a terminfo - entry corresponding to TERM. Use of this feature is not - recommended, as it essentially includes an entire termcap - compiler in the ncurses startup code, at significant cost + entry corresponding to TERM. Use of this feature is not + recommended, as it essentially includes an entire termcap + compiler in the ncurses startup code, at significant cost in core and startup cycles. - The ncurses library includes facilities for capturing - mouse events on certain terminals (including xterm). See + The ncurses library includes facilities for capturing + mouse events on certain terminals (including xterm). See the curs_mouse(3x) manual page for details. - The ncurses library includes facilities for responding to - window resizing events, e.g., when running in an xterm. - See the resizeterm(3x) and wresize(3x) manual pages for - details. In addition, the library may be configured with + The ncurses library includes facilities for responding to + window resizing events, e.g., when running in an xterm. + See the resizeterm(3x) and wresize(3x) manual pages for + details. In addition, the library may be configured with a SIGWINCH handler. - The ncurses library extends the fixed set of function key - capabilities of terminals by allowing the application - designer to define additional key sequences at runtime. + The ncurses library extends the fixed set of function key + capabilities of terminals by allowing the application + designer to define additional key sequences at runtime. See the define_key(3x) key_defined(3x), and keyok(3x) man- ual pages for details. The ncurses library can exploit the capabilities of termi- - nals which implement the ISO-6429 SGR 39 and SGR 49 con- + nals which implement the ISO-6429 SGR 39 and SGR 49 con- trols, which allow an application to reset the terminal to - its original foreground and background colors. From the - users' perspective, the application is able to draw col- - ored text on a background whose color is set indepen- - dently, providing better control over color contrasts. + its original foreground and background colors. From the + users' perspective, the application is able to draw col- + ored text on a background whose color is set indepen- + dently, providing better control over color contrasts. See the default_colors(3x) manual page for details. - The ncurses library includes a function for directing - application output to a printer attached to the terminal + The ncurses library includes a function for directing + application output to a printer attached to the terminal device. See the curs_print(3x) manual page for details.
- The ncurses library is intended to be BASE-level confor- + The ncurses library is intended to be BASE-level confor- mant with XSI Curses. The EXTENDED XSI Curses functional- ity (including color support) is supported. - A small number of local differences (that is, individual - differences between the XSI Curses and ncurses calls) are - described in PORTABILITY sections of the library man + A small number of local differences (that is, individual + differences between the XSI Curses and ncurses calls) are + described in PORTABILITY sections of the library man pages. This implementation also contains several extensions: - The routine has_key is not part of XPG4, nor is it - present in SVr4. See the curs_getch(3x) manual page + The routine has_key is not part of XPG4, nor is it + present in SVr4. See the curs_getch(3x) manual page for details. - The routine slk_attr is not part of XPG4, nor is it - present in SVr4. See the curs_slk(3x) manual page + The routine slk_attr is not part of XPG4, nor is it + present in SVr4. See the curs_slk(3x) manual page for details. - The routines getmouse, mousemask, ungetmouse, mou- - seinterval, and wenclose relating to mouse interfac- - ing are not part of XPG4, nor are they present in - SVr4. See the curs_mouse(3x) manual page for + The routines getmouse, mousemask, ungetmouse, mou- + seinterval, and wenclose relating to mouse interfac- + ing are not part of XPG4, nor are they present in + SVr4. See the curs_mouse(3x) manual page for details. - The routine mcprint was not present in any previous + The routine mcprint was not present in any previous curses implementation. See the curs_print(3x) manual page for details. - The routine wresize is not part of XPG4, nor is it + The routine wresize is not part of XPG4, nor is it present in SVr4. See the wresize(3x) manual page for details. The WINDOW structure's internal details can be hidden - from application programs. See curs_opaque(3x) for + from application programs. See curs_opaque(3x) for the discussion of is_scrollok, etc. - In historic curses versions, delays embedded in the capa- + In historic curses versions, delays embedded in the capa- bilities cr, ind, cub1, ff and tab activated corresponding - delay bits in the UNIX tty driver. In this implementa- - tion, all padding is done by sending NUL bytes. This - method is slightly more expensive, but narrows the inter- - face to the UNIX kernel significantly and increases the + delay bits in the UNIX tty driver. In this implementa- + tion, all padding is done by sending NUL bytes. This + method is slightly more expensive, but narrows the inter- + face to the UNIX kernel significantly and increases the package's portability correspondingly.
- The header file <curses.h> automatically includes the + The header file <curses.h> automatically includes the header files <stdio.h> and <unctrl.h>. - If standard output from a ncurses program is re-directed - to something which is not a tty, screen updates will be + If standard output from a ncurses program is re-directed + to something which is not a tty, screen updates will be directed to standard error. This was an undocumented fea- ture of AT&T System V Release 3 curses.
- Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey. + Zeyd M. Ben-Halim, Eric S. Raymond, Thomas E. Dickey. Based on pcurses by Pavel Curtis.