X-Git-Url: https://ncurses.scripts.mit.edu/?p=ncurses.git;a=blobdiff_plain;f=doc%2Fhtml%2Fman%2Fterminfo.5.html;h=3e9b57c03d4902d2e12a6d1ef829ba65c4d70c9d;hp=763ad5f08c479c35447aad2e7d5206d8ee915c76;hb=9f479192e3ca3413d235c66bf058f8cc63764898;hpb=02c4e383be9337e73a0e75844dfd1047745adb28

diff --git a/doc/html/man/terminfo.5.html b/doc/html/man/terminfo.5.html
index 763ad5f0..3e9b57c0 100644
--- a/doc/html/man/terminfo.5.html
+++ b/doc/html/man/terminfo.5.html
@@ -1,11 +1,12 @@
-<!-- 
+<!--
   * t
   * DO NOT EDIT THIS FILE BY HAND!
-  * It is generated from terminfo.head, Caps, and terminfo.tail.
+  * It is generated from terminfo.head,  ./../include/Caps ./../include/Caps-ncurses, and terminfo.tail.
   * Note: this must be run through tbl before nroff.
   * The magic cookie on the first line triggers this under some man programs.
   ****************************************************************************
-  * Copyright (c) 1998-2016,2017 Free Software Foundation, Inc.              *
+  * Copyright 2018-2020,2021 Thomas E. Dickey                                *
+  * Copyright 1998-2016,2017 Free Software Foundation, Inc.                  *
   *                                                                          *
   * Permission is hereby granted, free of charge, to any person obtaining a  *
   * copy of this software and associated documentation files (the            *
@@ -31,12 +32,37 @@
   * sale, use or other dealings in this Software without prior written       *
   * authorization.                                                           *
   ****************************************************************************
-  * @Id: terminfo.head,v 1.32 2017/04/22 13:52:49 tom Exp @
+  * @Id: terminfo.head,v 1.40 2021/06/17 21:30:22 tom Exp @
   * Head of terminfo man page ends here
-  * @Id: terminfo.tail,v 1.88 2017/08/12 22:26:02 tom Exp @
-  * Beginning of terminfo.tail file
-  * This file is part of ncurses.
-  * See "terminfo.head" for copyright.
+  ****************************************************************************
+  * Copyright 2018-2020,2021 Thomas E. Dickey                                *
+  * Copyright 1998-2016,2017 Free Software Foundation, Inc.                  *
+  *                                                                          *
+  * Permission is hereby granted, free of charge, to any person obtaining a  *
+  * copy of this software and associated documentation files (the            *
+  * "Software"), to deal in the Software without restriction, including      *
+  * without limitation the rights to use, copy, modify, merge, publish,      *
+  * distribute, distribute with modifications, sublicense, and/or sell       *
+  * copies of the Software, and to permit persons to whom the Software is    *
+  * furnished to do so, subject to the following conditions:                 *
+  *                                                                          *
+  * The above copyright notice and this permission notice shall be included  *
+  * in all copies or substantial portions of the Software.                   *
+  *                                                                          *
+  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS  *
+  * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF               *
+  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.   *
+  * IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,   *
+  * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR    *
+  * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR    *
+  * THE USE OR OTHER DEALINGS IN THE SOFTWARE.                               *
+  *                                                                          *
+  * Except as contained in this notice, the name(s) of the above copyright   *
+  * holders shall not be used in advertising or otherwise to promote the     *
+  * sale, use or other dealings in this Software without prior written       *
+  * authorization.                                                           *
+  ****************************************************************************
+  * @Id: terminfo.tail,v 1.101 2021/06/17 21:30:22 tom Exp @
   *.in -2
   *.in +2
   *.in -2
@@ -49,13 +75,13 @@
 <meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
 <meta name="generator" content="Manpage converted by man2html - see https://invisible-island.net/scripts/readme.html#others_scripts">
 <TITLE>terminfo 5   File Formats</TITLE>
-<link rev=made href="mailto:bug-ncurses@gnu.org">
+<link rel="author" href="mailto:bug-ncurses@gnu.org">
 <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
 </HEAD>
 <BODY>
 <H1 class="no-header">terminfo 5   File Formats</H1>
 <PRE>
-<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>                      File Formats                      <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
+<B><A HREF="terminfo.5.html">terminfo(5)</A></B>                      File Formats                      <B><A HREF="terminfo.5.html">terminfo(5)</A></B>
 
 
 
@@ -69,67 +95,74 @@
 
 
 </PRE><H2><a name="h2-DESCRIPTION">DESCRIPTION</a></H2><PRE>
-       <EM>Terminfo</EM>  is  a data base describing terminals, used by screen-oriented
-       programs such as <STRONG>nvi(1)</STRONG>, <STRONG>rogue(1)</STRONG> and  libraries  such  as  <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>.
-       <EM>Terminfo</EM> describes terminals by giving a set of capabilities which they
+       <I>Terminfo</I>  is  a data base describing terminals, used by screen-oriented
+       programs  such  as  <B>nvi(1)</B>,  <B>lynx(1)</B>,   <B>mutt(1)</B>,   and   other   curses
+       applications,  using  high-level calls to libraries such as <B><A HREF="curses.3X.html">curses(3X)</A></B>.
+       It is also used via low-level calls by  non-curses  applications  which
+       may  be  screen-oriented  (such  as  <B><A HREF="clear.1.html">clear(1)</A></B>)  or  non-screen (such as
+       <B><A HREF="tabs.1.html">tabs(1)</A></B>).
+
+       <I>Terminfo</I> describes terminals by giving a set of capabilities which they
        have, by specifying how to perform screen operations, and by specifying
-       padding  requirements  and  initialization  sequences.   This describes
-       <STRONG>ncurses</STRONG> version 6.1 (patch 20180407).
+       padding requirements and initialization sequences.
+
+       This manual describes <B>ncurses</B> version 6.2 (patch 20210612).
 
 
 </PRE><H3><a name="h3-Terminfo-Entry-Syntax">Terminfo Entry Syntax</a></H3><PRE>
-       Entries in <EM>terminfo</EM> consist of a sequence of fields:
+       Entries in <I>terminfo</I> consist of a sequence of fields:
 
-       <STRONG>o</STRONG>   Each field ends with a comma "," (embedded commas  may  be  escaped
+       <B>o</B>   Each field ends with a comma "," (embedded commas  may  be  escaped
            with a backslash or written as "\054").
 
-       <STRONG>o</STRONG>   White space between fields is ignored.
+       <B>o</B>   White space between fields is ignored.
 
-       <STRONG>o</STRONG>   The first field in a <EM>terminfo</EM> entry begins in the first column.
+       <B>o</B>   The first field in a <I>terminfo</I> entry begins in the first column.
 
-       <STRONG>o</STRONG>   Newlines  and  leading  whitespace (spaces or tabs) may be used for
+       <B>o</B>   Newlines  and  leading  whitespace (spaces or tabs) may be used for
            formatting entries for readability.  These are removed from  parsed
            entries.
 
-           The  <STRONG>infocmp</STRONG>  <STRONG>-f</STRONG> and <STRONG>-W</STRONG> options rely on this to format if-then-else
-           expressions, or to enforce maximum line-width.  The resulting  for-
-           matted terminal description can be read by <STRONG>tic</STRONG>.
+           The  <B>infocmp</B>  <B>-f</B> and <B>-W</B> options rely on this to format if-then-else
+           expressions, or  to  enforce  maximum  line-width.   The  resulting
+           formatted terminal description can be read by <B>tic</B>.
 
-       <STRONG>o</STRONG>   The  first  field for each terminal gives the names which are known
+       <B>o</B>   The  first  field for each terminal gives the names which are known
            for the terminal, separated by "|" characters.
 
-           The first name given is the most common abbreviation for the termi-
-           nal  (its  primary name), the last name given should be a long name
-           fully identifying the terminal (see <STRONG><A HREF="curs_termattrs.3x.html">longname(3x)</A></STRONG>), and  all  others
-           are treated as synonyms (aliases) for the primary terminal name.
+           The first name given  is  the  most  common  abbreviation  for  the
+           terminal  (its  primary name), the last name given should be a long
+           name fully identifying the terminal  (see  <B><A HREF="curs_termattrs.3X.html">longname(3X)</A></B>),  and  all
+           others  are  treated as synonyms (aliases) for the primary terminal
+           name.
 
-           X/Open  Curses  advises  that  all  names but the last should be in
-           lower case and contain no blanks; the last name  may  well  contain
+           X/Open Curses advises that all names but  the  last  should  be  in
+           lower  case  and  contain no blanks; the last name may well contain
            upper case and blanks for readability.
 
-           This  implementation  is not so strict; it allows mixed case in the
+           This implementation is not so strict; it allows mixed case  in  the
            primary name and aliases.  If the last name has no embedded blanks,
-           it  allows  that  to  be both an alias and a verbose name (but will
+           it allows that to be both an alias and a  verbose  name  (but  will
            warn about this ambiguity).
 
-       <STRONG>o</STRONG>   Lines beginning with a "#" in the first column are treated as  com-
-           ments.
+       <B>o</B>   Lines  beginning  with  a  "#"  in  the first column are treated as
+           comments.
 
-           While comment lines are legal at any point, the output of <STRONG>captoinfo</STRONG>
-           and <STRONG>infotocap</STRONG> (aliases for <STRONG>tic</STRONG>) will move comments  so  they  occur
+           While comment lines are legal at any point, the output of <B>captoinfo</B>
+           and  <B>infotocap</B>  (aliases  for <B>tic</B>) will move comments so they occur
            only between entries.
 
-       Terminal  names  (except  for the last, verbose entry) should be chosen
-       using the following conventions.  The particular piece of hardware mak-
-       ing  up the terminal should have a root name, thus "hp2621".  This name
-       should not contain hyphens.  Modes that the hardware can be in, or user
-       preferences,  should be indicated by appending a hyphen and a mode suf-
-       fix.  Thus, a vt100 in 132 column mode would be vt100-w.  The following
-       suffixes should be used where possible:
-
-            <STRONG>Suffix</STRONG>                  <STRONG>Meaning</STRONG>                   <STRONG>Example</STRONG>
-            -<EM>nn</EM>      Number of lines on the screen            aaa-60
-            -<EM>n</EM>p      Number of pages of memory                c100-4p
+       Terminal names (except for the last, verbose entry)  should  be  chosen
+       using  the  following  conventions.   The  particular piece of hardware
+       making up the terminal should have a root name,  thus  "hp2621".   This
+       name should not contain hyphens.  Modes that the hardware can be in, or
+       user preferences, should be indicated by appending a hyphen and a  mode
+       suffix.   Thus,  a  vt100  in  132-column  mode  would be vt100-w.  The
+       following suffixes should be used where possible:
+
+            <B>Suffix</B>                  <B>Meaning</B>                   <B>Example</B>
+            -<I>nn</I>      Number of lines on the screen            aaa-60
+            -<I>n</I>p      Number of pages of memory                c100-4p
             -am      With automargins (usually the default)   vt100-am
             -m       Mono mode; suppress color                ansi-m
             -mc      Magic cookie; spaces when highlighting   wy30-mc
@@ -142,153 +175,161 @@
             -vb      Use visible bell instead of beep         wy370-vb
             -w       Wide mode (&gt; 80 columns, usually 132)    vt100-w
 
-       For more on terminal naming conventions, see the <STRONG>term(7)</STRONG> manual page.
+       For more on terminal naming conventions, see the <B><A HREF="term.7.html">term(7)</A></B> manual page.
 
 
 </PRE><H3><a name="h3-Terminfo-Capabilities-Syntax">Terminfo Capabilities Syntax</a></H3><PRE>
-       The  terminfo  entry  consists  of several <EM>capabilities</EM>, i.e., features
-       that the terminal has, or methods for exercising  the  terminal's  fea-
-       tures.
+       The terminfo entry consists of  several  <I>capabilities</I>,  i.e.,  features
+       that  the  terminal  has,  or  methods  for  exercising  the terminal's
+       features.
 
        After the first field (giving the name(s) of the terminal entry), there
-       should be one or more <EM>capability</EM> fields.  These are boolean, numeric or
+       should be one or more <I>capability</I> fields.  These are boolean, numeric or
        string names with corresponding values:
 
-       <STRONG>o</STRONG>   Boolean  capabilities  are  true  when  present, false when absent.
+       <B>o</B>   Boolean capabilities are true  when  present,  false  when  absent.
            There is no explicit value for boolean capabilities.
 
-       <STRONG>o</STRONG>   Numeric capabilities  have  a  "#"  following  the  name,  then  an
+       <B>o</B>   Numeric  capabilities  have  a  "#"  following  the  name,  then an
            unsigned decimal integer value.
 
-       <STRONG>o</STRONG>   String  capabilities  have a "=" following the name, then an string
+       <B>o</B>   String capabilities have a "=" following the name, then  an  string
            of characters making up the capability value.
 
-           String capabilities can be split into multiple lines, just  as  the
-           fields  comprising  a  terminal  entry  can  be split into multiple
-           lines.  While blanks between fields are  ignored,  blanks  embedded
-           within  a string value are retained, except for leading blanks on a
+           String  capabilities  can be split into multiple lines, just as the
+           fields comprising a terminal  entry  can  be  split  into  multiple
+           lines.   While  blanks  between fields are ignored, blanks embedded
+           within a string value are retained, except for leading blanks on  a
            line.
 
-       Any capability can be <EM>canceled</EM>,  i.e.,  suppressed  from  the  terminal
+       Any  capability  can  be  <I>canceled</I>,  i.e., suppressed from the terminal
        entry, by following its name with "@" rather than a capability value.
 
 
 </PRE><H3><a name="h3-Similar-Terminals">Similar Terminals</a></H3><PRE>
-       If  there  are  two  very  similar  terminals, one (the variant) can be
-       defined as being just like the other (the  base)  with  certain  excep-
-       tions.  In the definition of the variant, the string capability <STRONG>use</STRONG> can
-       be given with the name of the base terminal:
+       If there are two very similar  terminals,  one  (the  variant)  can  be
+       defined   as  being  just  like  the  other  (the  base)  with  certain
+       exceptions.  In the definition of the variant,  the  string  capability
+       <B>use</B> can be given with the name of the base terminal:
 
-       <STRONG>o</STRONG>   The capabilities given before <STRONG>use</STRONG> override those in the  base  type
-           named by <STRONG>use</STRONG>.
+       <B>o</B>   The  capabilities  given before <B>use</B> override those in the base type
+           named by <B>use</B>.
 
-       <STRONG>o</STRONG>   If  there are multiple <STRONG>use</STRONG> capabilities, they are merged in reverse
-           order.  That is, the rightmost <STRONG>use</STRONG> reference  is  processed  first,
+       <B>o</B>   If there are multiple <B>use</B> capabilities, they are merged in  reverse
+           order.   That  is,  the rightmost <B>use</B> reference is processed first,
            then the one to its left, and so forth.
 
-       <STRONG>o</STRONG>   Capabilities  given  explicitly in the entry override those brought
-           in by <STRONG>use</STRONG> references.
+       <B>o</B>   Capabilities given explicitly in the entry override  those  brought
+           in by <B>use</B> references.
 
-       A capability can be canceled by placing <STRONG>xx@</STRONG> to the left of the use ref-
-       erence  that  imports it, where <EM>xx</EM> is the capability.  For example, the
-       entry
+       A  capability  can  be  canceled  by placing <B>xx@</B> to the left of the use
+       reference that imports it, where <I>xx</I> is the  capability.   For  example,
+       the entry
 
               2621-nl, smkx@, rmkx@, use=2621,
 
-       defines a 2621-nl that does not have the <STRONG>smkx</STRONG> or <STRONG>rmkx</STRONG> capabilities, and
-       hence  does  not  turn  on the function key labels when in visual mode.
-       This is useful for different modes for a  terminal,  or  for  different
+       defines a 2621-nl that does not have the <B>smkx</B> or <B>rmkx</B> capabilities, and
+       hence does not turn on the function key labels  when  in  visual  mode.
+       This  is  useful  for  different modes for a terminal, or for different
        user preferences.
 
-       An entry included via <STRONG>use</STRONG> can contain canceled capabilities, which have
-       the same effect as if those cancels were inline in the  using  terminal
+       An entry included via <B>use</B> can contain canceled capabilities, which have
+       the  same  effect as if those cancels were inline in the using terminal
        entry.
 
 
 </PRE><H3><a name="h3-Predefined-Capabilities">Predefined Capabilities</a></H3><PRE>
-       The  following  is  a  complete table of the capabilities included in a
-       terminfo description block and available to  terminfo-using  code.   In
+       The following is a complete table of the  capabilities  included  in  a
+       terminfo  description  block  and available to terminfo-using code.  In
        each line of the table,
 
-       The  <STRONG>variable</STRONG>  is  the  name  by  which the programmer (at the terminfo
+       The <B>variable</B> is the name by  which  the  programmer  (at  the  terminfo
        level) accesses the capability.
 
-       The <STRONG>capname</STRONG> is the short name used in the text of the database, and  is
-       used  by  a  person updating the database.  Whenever possible, capnames
+       The  <B>capname</B> is the short name used in the text of the database, and is
+       used by a person updating the database.   Whenever  possible,  capnames
        are chosen to be the same as or similar to the ANSI X3.64-1979 standard
-       (now  superseded  by  ECMA-48,  which  uses  identical  or very similar
-       names).  Semantics are also intended to match those of  the  specifica-
-       tion.
+       (now superseded by  ECMA-48,  which  uses  identical  or  very  similar
+       names).    Semantics   are   also   intended  to  match  those  of  the
+       specification.
 
-       The  termcap code is the old <STRONG>termcap</STRONG> capability name (some capabilities
+       The termcap code is the old <B>termcap</B> capability name (some  capabilities
        are new, and have names which termcap did not originate).
 
-       Capability names have no hard length limit, but an informal limit of  5
+       Capability  names have no hard length limit, but an informal limit of 5
        characters has been adopted to keep them short and to allow the tabs in
-       the source file <STRONG>Caps</STRONG> to line up nicely.
+       the source file <B>Caps</B> to line up nicely.
 
-       Finally, the description field attempts to convey the semantics of  the
+       Finally,  the description field attempts to convey the semantics of the
        capability.  You may find some codes in the description field:
 
        (P)    indicates that padding may be specified
 
-       #[1-9] in  the  description  field  indicates that the string is passed
-              through tparm with parms as given (#<EM>i</EM>).
+       #[1-9] in the description field indicates that  the  string  is  passed
+              through <B><A HREF="curs_terminfo.3X.html">tparm(3X)</A></B> with parameters as given (#<I>i</I>).
+
+              If  no  parameters  are  listed  in the description, passing the
+              string through <B><A HREF="curs_terminfo.3X.html">tparm(3X)</A></B> may give unexpected results,  e.g.,  if
+              it contains percent (%%) signs.
 
-       (P*)   indicates that padding may vary in proportion to the  number  of
+       (P*)   indicates  that  padding may vary in proportion to the number of
               lines affected
 
-       (#<EM>i</EM>)   indicates the <EM>i</EM>th parameter.
+       (#<I>i</I>)   indicates the <I>i</I>th parameter.
 
 
        These are the boolean capabilities:
 
 
-                  <STRONG>Variable</STRONG>            <STRONG>Cap-</STRONG>      <STRONG>TCap</STRONG>       <STRONG>Description</STRONG>
-                  <STRONG>Booleans</STRONG>            <STRONG>name</STRONG>      <STRONG>Code</STRONG>
-          auto_left_margin            bw        bw     cub1 wraps from col-
-                                                       umn 0 to last column
-          auto_right_margin           am        am     terminal has auto-
-                                                       matic margins
+                  <B>Variable</B>            <B>Cap-</B>      <B>TCap</B>       <B>Description</B>
+                  <B>Booleans</B>            <B>name</B>      <B>Code</B>
+
+
+
+          auto_left_margin            bw        bw     cub1 wraps from
+                                                       column 0 to last
+                                                       column
+          auto_right_margin           am        am     terminal has
+                                                       automatic margins
           back_color_erase            bce       ut     screen erased with
                                                        background color
           can_change                  ccc       cc     terminal can re-
-                                                       define existing col-
-                                                       ors
+                                                       define existing
+                                                       colors
           ceol_standout_glitch        xhp       xs     standout not erased
                                                        by overwriting (hp)
           col_addr_glitch             xhpa      YA     only positive motion
                                                        for hpa/mhpa caps
-
           cpi_changes_res             cpix      YF     changing character
-                                                       pitch changes reso-
-                                                       lution
+                                                       pitch changes
+                                                       resolution
           cr_cancels_micro_mode       crxm      YB     using cr turns off
                                                        micro mode
           dest_tabs_magic_smso        xt        xt     tabs destructive,
                                                        magic so char
                                                        (t1061)
           eat_newline_glitch          xenl      xn     newline ignored
-                                                       after 80 cols (con-
-                                                       cept)
-          erase_overstrike            eo        eo     can erase over-
-                                                       strikes with a blank
+                                                       after 80 cols
+                                                       (concept)
+          erase_overstrike            eo        eo     can erase
+                                                       overstrikes with a
+                                                       blank
           generic_type                gn        gn     generic line type
           hard_copy                   hc        hc     hardcopy terminal
           hard_cursor                 chts      HC     cursor is hard to
                                                        see
           has_meta_key                km        km     Has a meta key
                                                        (i.e., sets 8th-bit)
-          has_print_wheel             daisy     YC     printer needs opera-
-                                                       tor to change char-
-                                                       acter set
+          has_print_wheel             daisy     YC     printer needs
+                                                       operator to change
+                                                       character set
           has_status_line             hs        hs     has extra status
                                                        line
           hue_lightness_saturation    hls       hl     terminal uses only
                                                        HLS color notation
                                                        (Tektronix)
-          insert_null_glitch          in        in     insert mode distin-
-                                                       guishes nulls
+          insert_null_glitch          in        in     insert mode
+                                                       distinguishes nulls
           lpi_changes_res             lpix      YG     changing line pitch
                                                        changes resolution
           memory_above                da        da     display may be
@@ -310,10 +351,11 @@
                                                        not exist
           non_dest_scroll_region      ndscr     ND     scrolling region is
                                                        non-destructive
+
           non_rev_rmcup               nrrmc     NR     smcup does not
                                                        reverse rmcup
-          over_strike                 os        os     terminal can over-
-                                                       strike
+          over_strike                 os        os     terminal can
+                                                       overstrike
           prtr_silent                 mc5i      5i     printer will not
                                                        echo on screen
           row_addr_glitch             xvpa      YD     only positive motion
@@ -324,8 +366,6 @@
                                                        on the status line
           tilde_glitch                hz        hz     cannot print ~'s
                                                        (Hazeltine)
-
-
           transparent_underline       ul        ul     underline character
                                                        overstrikes
           xon_xoff                    xon       xo     terminal uses
@@ -334,8 +374,8 @@
        These are the numeric capabilities:
 
 
-                  <STRONG>Variable</STRONG>            <STRONG>Cap-</STRONG>      <STRONG>TCap</STRONG>       <STRONG>Description</STRONG>
-                   <STRONG>Numeric</STRONG>            <STRONG>name</STRONG>      <STRONG>Code</STRONG>
+                  <B>Variable</B>            <B>Cap-</B>      <B>TCap</B>       <B>Description</B>
+                   <B>Numeric</B>            <B>name</B>      <B>Code</B>
           columns                     cols      co     number of columns in
                                                        a line
           init_tabs                   it        it     tabs initially every
@@ -372,13 +412,14 @@
           width_status_line           wsl       ws     number of columns in
                                                        status line
 
-       The following numeric capabilities  are  present  in  the  SVr4.0  term
-       structure,  but  are  not yet documented in the man page.  They came in
+       The  following  numeric  capabilities  are  present  in the SVr4.0 term
+       structure, but are not yet documented in the man page.   They  came  in
        with SVr4's printer support.
 
 
-                  <STRONG>Variable</STRONG>            <STRONG>Cap-</STRONG>      <STRONG>TCap</STRONG>       <STRONG>Description</STRONG>
-                   <STRONG>Numeric</STRONG>            <STRONG>name</STRONG>      <STRONG>Code</STRONG>
+
+                  <B>Variable</B>            <B>Cap-</B>      <B>TCap</B>       <B>Description</B>
+                   <B>Numeric</B>            <B>name</B>      <B>Code</B>
           bit_image_entwining         bitwin    Yo     number of passes for
                                                        each bit-image row
           bit_image_type              bitype    Yp     type of bit-image
@@ -388,13 +429,12 @@
                                                        printing
           buttons                     btns      BT     number of buttons on
                                                        mouse
-          dot_horz_spacing            spinh     Yc     spacing of dots hor-
-                                                       izontally in dots
+          dot_horz_spacing            spinh     Yc     spacing of dots
+                                                       horizontally in dots
+                                                       per inch
+          dot_vert_spacing            spinv     Yb     spacing of pins
+                                                       vertically in pins
                                                        per inch
-
-          dot_vert_spacing            spinv     Yb     spacing of pins ver-
-                                                       tically in pins per
-                                                       inch
           max_micro_address           maddr     Yd     maximum value in
                                                        micro_..._address
           max_micro_jump              mjump     Ye     maximum value in
@@ -405,18 +445,19 @@
                                                        in micro mode
           number_of_pins              npins     Yh     numbers of pins in
                                                        print-head
-          output_res_char             orc       Yi     horizontal resolu-
-                                                       tion in units per
-                                                       line
-          output_res_horz_inch        orhi      Yk     horizontal resolu-
-                                                       tion in units per
-                                                       inch
+          output_res_char             orc       Yi     horizontal
+                                                       resolution in units
+                                                       per line
+          output_res_horz_inch        orhi      Yk     horizontal
+                                                       resolution in units
+                                                       per inch
           output_res_line             orl       Yj     vertical resolution
                                                        in units per line
           output_res_vert_inch        orvi      Yl     vertical resolution
                                                        in units per inch
-          print_rate                  cps       Ym     print rate in char-
-                                                       acters per second
+          print_rate                  cps       Ym     print rate in
+                                                       characters per
+                                                       second
           wide_char_size              widcs     Yn     character step size
                                                        when in double wide
                                                        mode
@@ -424,8 +465,8 @@
        These are the string capabilities:
 
 
-                  <STRONG>Variable</STRONG>            <STRONG>Cap-</STRONG>      <STRONG>TCap</STRONG>       <STRONG>Description</STRONG>
-                   <STRONG>String</STRONG>             <STRONG>name</STRONG>      <STRONG>Code</STRONG>
+                  <B>Variable</B>            <B>Cap-</B>      <B>TCap</B>       <B>Description</B>
+                   <B>String</B>             <B>name</B>      <B>Code</B>
           acs_chars                   acsc      ac     graphics charset
                                                        pairs, based on
                                                        vt100
@@ -441,8 +482,10 @@
                                                        lines per inch to #1
           change_res_horz             chr       ZC     Change horizontal
                                                        resolution to #1
-          change_res_vert             cvr       ZD     Change vertical res-
-                                                       olution to #1
+
+
+          change_res_vert             cvr       ZD     Change vertical
+                                                       resolution to #1
           change_scroll_region        csr       cs     change region to
                                                        line #1 to line #2
                                                        (P)
@@ -456,8 +499,6 @@
                                                        home cursor (P*)
           clr_bol                     el1       cb     Clear to beginning
                                                        of line
-
-
           clr_eol                     el        ce     clear to end of line
                                                        (P)
           clr_eos                     ed        cd     clear to end of
@@ -469,17 +510,18 @@
                                                        prototype !?
           create_window               cwin      CW     define a window #1
                                                        from #2,#3 to #4,#5
-          cursor_address              cup       cm     move to row #1 col-
-                                                       umns #2
+          cursor_address              cup       cm     move to row #1
+                                                       columns #2
           cursor_down                 cud1      do     down one line
           cursor_home                 home      ho     home cursor (if no
                                                        cup)
-          cursor_invisible            civis     vi     make cursor invisi-
-                                                       ble
+          cursor_invisible            civis     vi     make cursor
+                                                       invisible
           cursor_left                 cub1      le     move left one space
-          cursor_mem_address          mrcup     CM     memory relative cur-
-                                                       sor addressing, move
-                                                       to row #1 columns #2
+          cursor_mem_address          mrcup     CM     memory relative
+                                                       cursor addressing,
+                                                       move to row #1
+                                                       columns #2
           cursor_normal               cnorm     ve     make cursor appear
                                                        normal (undo
                                                        civis/cvvis)
@@ -507,11 +549,12 @@
                                                        character set (P)
           enter_am_mode               smam      SA     turn on automatic
                                                        margins
+
           enter_blink_mode            blink     mb     turn on blinking
           enter_bold_mode             bold      md     turn on bold (extra
                                                        bright) mode
-          enter_ca_mode               smcup     ti     string to start pro-
-                                                       grams using cup
+          enter_ca_mode               smcup     ti     string to start
+                                                       programs using cup
           enter_delete_mode           smdc      dm     enter delete mode
           enter_dim_mode              dim       mh     turn on half-bright
                                                        mode
@@ -521,9 +564,8 @@
                                                        mode
           enter_insert_mode           smir      im     enter insert mode
           enter_italics_mode          sitm      ZH     Enter italic mode
-          enter_leftward_mode         slm       ZI     Start leftward car-
-                                                       riage motion
-
+          enter_leftward_mode         slm       ZI     Start leftward
+                                                       carriage motion
           enter_micro_mode            smicm     ZJ     Start micro-motion
                                                        mode
           enter_near_letter_quality   snlq      ZK     Enter NLQ mode
@@ -534,8 +576,8 @@
           enter_reverse_mode          rev       mr     turn on reverse
                                                        video mode
           enter_secure_mode           invis     mk     turn on blank mode
-                                                       (characters invisi-
-                                                       ble)
+                                                       (characters
+                                                       invisible)
           enter_shadow_mode           sshm      ZM     Enter shadow-print
                                                        mode
           enter_standout_mode         smso      so     begin standout mode
@@ -543,20 +585,20 @@
           enter_superscript_mode      ssupm     ZO     Enter superscript
                                                        mode
           enter_underline_mode        smul      us     begin underline mode
-          enter_upward_mode           sum       ZP     Start upward car-
-                                                       riage motion
+          enter_upward_mode           sum       ZP     Start upward
+                                                       carriage motion
           enter_xon_mode              smxon     SX     turn on xon/xoff
                                                        handshaking
           erase_chars                 ech       ec     erase #1 characters
                                                        (P)
-          exit_alt_charset_mode       rmacs     ae     end alternate char-
-                                                       acter set (P)
+          exit_alt_charset_mode       rmacs     ae     end alternate
+                                                       character set (P)
           exit_am_mode                rmam      RA     turn off automatic
                                                        margins
           exit_attribute_mode         sgr0      me     turn off all
                                                        attributes
-          exit_ca_mode                rmcup     te     strings to end pro-
-                                                       grams using cup
+          exit_ca_mode                rmcup     te     strings to end
+                                                       programs using cup
           exit_delete_mode            rmdc      ed     end delete mode
           exit_doublewide_mode        rwidm     ZQ     End double-wide mode
           exit_insert_mode            rmir      ei     exit insert mode
@@ -570,12 +612,14 @@
           exit_subscript_mode         rsubm     ZV     End subscript mode
           exit_superscript_mode       rsupm     ZW     End superscript mode
           exit_underline_mode         rmul      ue     exit underline mode
-          exit_upward_mode            rum       ZX     End reverse charac-
-                                                       ter motion
+          exit_upward_mode            rum       ZX     End reverse
+                                                       character motion
+
+
           exit_xon_mode               rmxon     RX     turn off xon/xoff
                                                        handshaking
-          fixed_pause                 pause     PA     pause for 2-3 sec-
-                                                       onds
+          fixed_pause                 pause     PA     pause for 2-3
+                                                       seconds
           flash_hook                  hook      fh     flash switch hook
           flash_screen                flash     vb     visible bell (may
                                                        not move cursor)
@@ -589,11 +633,10 @@
                                                        string
           init_2string                is2       is     initialization
                                                        string
-
           init_3string                is3       i3     initialization
                                                        string
-          init_file                   if        if     name of initializa-
-                                                       tion file
+          init_file                   if        if     name of
+                                                       initialization file
           init_prog                   iprog     iP     path name of program
                                                        for initialization
           initialize_color            initc     Ic     initialize color #1
@@ -607,15 +650,15 @@
           insert_padding              ip        ip     insert padding after
                                                        inserted character
           key_a1                      ka1       K1     upper left of keypad
-          key_a3                      ka3       K3     upper right of key-
-                                                       pad
+          key_a3                      ka3       K3     upper right of
+                                                       keypad
           key_b2                      kb2       K2     center of keypad
           key_backspace               kbs       kb     backspace key
           key_beg                     kbeg      @1     begin key
           key_btab                    kcbt      kB     back-tab key
           key_c1                      kc1       K4     lower left of keypad
-          key_c3                      kc3       K5     lower right of key-
-                                                       pad
+          key_c3                      kc3       K5     lower right of
+                                                       keypad
           key_cancel                  kcan      @2     cancel key
           key_catab                   ktbc      ka     clear-all-tabs key
           key_clear                   kclr      kC     clear-screen or
@@ -638,6 +681,7 @@
                                                        screen key
           key_exit                    kext      @9     exit key
           key_f0                      kf0       k0     F0 function key
+
           key_f1                      kf1       k1     F1 function key
           key_f10                     kf10      k;     F10 function key
           key_f11                     kf11      F1     F11 function key
@@ -655,7 +699,6 @@
           key_f22                     kf22      FC     F22 function key
           key_f23                     kf23      FD     F23 function key
           key_f24                     kf24      FE     F24 function key
-
           key_f25                     kf25      FF     F25 function key
           key_f26                     kf26      FG     F26 function key
           key_f27                     kf27      FH     F27 function key
@@ -704,6 +747,7 @@
           key_f9                      kf9       k9     F9 function key
           key_find                    kfnd      @0     find key
           key_help                    khlp      %1     help key
+
           key_home                    khome     kh     home key
           key_ic                      kich1     kI     insert-character key
           key_il                      kil1      kA     insert-line key
@@ -721,7 +765,6 @@
           key_previous                kprv      %8     previous key
           key_print                   kprt      %9     print key
           key_redo                    krdo      %0     redo key
-
           key_reference               kref      &amp;1     reference key
           key_refresh                 krfr      &amp;2     refresh key
           key_replace                 krpl      &amp;3     replace key
@@ -734,8 +777,8 @@
           key_scommand                kCMD      *1     shifted command key
           key_scopy                   kCPY      *2     shifted copy key
           key_screate                 kCRT      *3     shifted create key
-          key_sdc                     kDC       *4     shifted delete-char-
-                                                       acter key
+          key_sdc                     kDC       *4     shifted delete-
+                                                       character key
           key_sdl                     kDL       *5     shifted delete-line
                                                        key
           key_select                  kslt      *6     select key
@@ -747,8 +790,8 @@
           key_sfind                   kFND      *0     shifted find key
           key_shelp                   kHLP      #1     shifted help key
           key_shome                   kHOM      #2     shifted home key
-          key_sic                     kIC       #3     shifted insert-char-
-                                                       acter key
+          key_sic                     kIC       #3     shifted insert-
+                                                       character key
           key_sleft                   kLFT      #4     shifted left-arrow
                                                        key
           key_smessage                kMSG      %a     shifted message key
@@ -770,10 +813,13 @@
           key_suspend                 kspd      &amp;7     suspend key
           key_undo                    kund      &amp;8     undo key
           key_up                      kcuu1     ku     up-arrow key
-          keypad_local                rmkx      ke     leave 'key-
-                                                       board_transmit' mode
-          keypad_xmit                 smkx      ks     enter 'key-
-                                                       board_transmit' mode
+
+          keypad_local                rmkx      ke     leave
+                                                       'keyboard_transmit'
+                                                       mode
+          keypad_xmit                 smkx      ks     enter
+                                                       'keyboard_transmit'
+                                                       mode
           lab_f0                      lf0       l0     label on function
                                                        key f0 if not f0
           lab_f1                      lf1       l1     label on function
@@ -786,8 +832,6 @@
                                                        key f3 if not f3
           lab_f4                      lf4       l4     label on function
                                                        key f4 if not f4
-
-
           lab_f5                      lf5       l5     label on function
                                                        key f5 if not f5
           lab_f6                      lf6       l6     label on function
@@ -830,21 +874,25 @@
                                                        (P*)
           parm_delete_line            dl        DL     delete #1 lines (P*)
           parm_down_cursor            cud       DO     down #1 lines (P*)
-          parm_down_micro             mcud      Zf     Like parm_down_cur-
-                                                       sor in micro mode
+          parm_down_micro             mcud      Zf     Like
+                                                       parm_down_cursor in
+                                                       micro mode
           parm_ich                    ich       IC     insert #1 characters
                                                        (P*)
+
           parm_index                  indn      SF     scroll forward #1
                                                        lines (P)
           parm_insert_line            il        AL     insert #1 lines (P*)
           parm_left_cursor            cub       LE     move #1 characters
                                                        to the left (P)
-          parm_left_micro             mcub      Zg     Like parm_left_cur-
-                                                       sor in micro mode
+          parm_left_micro             mcub      Zg     Like
+                                                       parm_left_cursor in
+                                                       micro mode
           parm_right_cursor           cuf       RI     move #1 characters
                                                        to the right (P*)
-          parm_right_micro            mcuf      Zh     Like parm_right_cur-
-                                                       sor in micro mode
+          parm_right_micro            mcuf      Zh     Like
+                                                       parm_right_cursor in
+                                                       micro mode
           parm_rindex                 rin       SR     scroll back #1 lines
                                                        (P)
           parm_up_cursor              cuu       UP     up #1 lines (P*)
@@ -852,8 +900,6 @@
                                                        in micro mode
           pkey_key                    pfkey     pk     program function key
                                                        #1 to type string #2
-
-
           pkey_local                  pfloc     pl     program function key
                                                        #1 to execute string
                                                        #2
@@ -869,8 +915,8 @@
           prtr_off                    mc4       pf     turn off printer
           prtr_on                     mc5       po     turn on printer
           pulse                       pulse     PU     select pulse dialing
-          quick_dial                  qdial     QD     dial number #1 with-
-                                                       out checking
+          quick_dial                  qdial     QD     dial number #1
+                                                       without checking
           remove_clock                rmclk     RC     remove clock
           repeat_char                 rep       rp     repeat char #1 #2
                                                        times (P*)
@@ -898,6 +944,8 @@
                                                        #1
           set_bottom_margin           smgb      Zk     Set bottom margin at
                                                        current line
+
+
           set_bottom_margin_parm      smgbp     Zl     Set bottom margin at
                                                        line #1 or (if smgtp
                                                        is not given) #2
@@ -909,17 +957,15 @@
           set_foreground              setf      Sf     Set foreground color
                                                        #1
           set_left_margin             smgl      ML     set left soft margin
-                                                       at current col-
-                                                       umn.     See smgl.
-                                                       (ML is not in BSD
-                                                       termcap).
+                                                       at current
+                                                       column.     See
+                                                       smgl. (ML is not in
+                                                       BSD termcap).
           set_left_margin_parm        smglp     Zm     Set left (right)
                                                        margin at column #1
-          set_right_margin            smgr      MR     set right soft mar-
-                                                       gin at current col-
-                                                       umn
-
-
+          set_right_margin            smgr      MR     set right soft
+                                                       margin at current
+                                                       column
           set_right_margin_parm       smgrp     Zn     Set right margin at
                                                        column #1
           set_tab                     hts       st     set a tab in every
@@ -941,10 +987,12 @@
                                                        image graphics
           stop_char_set_def           rcsd      Zt     End definition of
                                                        character set #1
-          subscript_characters        subcs     Zu     List of subscript-
-                                                       able characters
-          superscript_characters      supcs     Zv     List of superscript-
-                                                       able characters
+          subscript_characters        subcs     Zu     List of
+                                                       subscriptable
+                                                       characters
+          superscript_characters      supcs     Zv     List of
+                                                       superscriptable
+                                                       characters
           tab                         ht        ta     tab to next 8-space
                                                        hardware tab stop
           these_cause_cr              docr      Zw     Printing any of
@@ -963,6 +1011,7 @@
           user3                       u3        u3     User string #3
           user4                       u4        u4     User string #4
           user5                       u5        u5     User string #5
+
           user6                       u6        u6     User string #6
           user7                       u7        u7     User string #7
           user8                       u8        u8     User string #8
@@ -970,40 +1019,39 @@
           wait_tone                   wait      WA     wait for dial-tone
           xoff_character              xoffc     XF     XOFF character
           xon_character               xonc      XN     XON character
-          zero_motion                 zerom     Zx     No motion for subse-
-                                                       quent character
+          zero_motion                 zerom     Zx     No motion for
+                                                       subsequent character
 
-       The following string capabilities are present in the SVr4.0 term struc-
-       ture, but were originally not documented in the man page.
+       The  following  string  capabilities  are  present  in  the SVr4.0 term
+       structure, but were originally not documented in the man page.
 
 
-                  <STRONG>Variable</STRONG>            <STRONG>Cap-</STRONG>       <STRONG>TCap</STRONG>      <STRONG>Description</STRONG>
-                   <STRONG>String</STRONG>             <STRONG>name</STRONG>       <STRONG>Code</STRONG>
+                  <B>Variable</B>            <B>Cap-</B>       <B>TCap</B>      <B>Description</B>
+                   <B>String</B>             <B>name</B>       <B>Code</B>
           alt_scancode_esc            scesa      S8     Alternate escape
-                                                        for scancode emu-
-                                                        lation
+                                                        for scancode
+                                                        emulation
           bit_image_carriage_return   bicr       Yv     Move to beginning
                                                         of same row
-
-
           bit_image_newline           binel      Zz     Move to next row
                                                         of the bit image
           bit_image_repeat            birep      Xy     Repeat bit image
                                                         cell #1 #2 times
           char_set_names              csnm       Zy     Produce #1'th item
-                                                        from list of char-
-                                                        acter set names
+                                                        from list of
+                                                        character set
+                                                        names
           code_set_init               csin       ci     Init sequence for
                                                         multiple codesets
           color_names                 colornm    Yw     Give name for
                                                         color #1
           define_bit_image_region     defbi      Yx     Define rectangular
                                                         bit image region
-          device_type                 devt       dv     Indicate lan-
-                                                        guage/codeset sup-
-                                                        port
-          display_pc_char             dispc      S1     Display PC charac-
-                                                        ter #1
+          device_type                 devt       dv     Indicate
+                                                        language/codeset
+                                                        support
+          display_pc_char             dispc      S1     Display PC
+                                                        character #1
           end_bit_image_region        endbi      Yy     End a bit-image
                                                         region
           enter_pc_charset_mode       smpch      S2     Enter PC character
@@ -1028,10 +1076,12 @@
                                                         key #1 to type
                                                         string #2 and show
                                                         string #3
+
+
           req_mouse_pos               reqmp      RQ     Request mouse
                                                         position
-          scancode_escape             scesc      S7     Escape for scan-
-                                                        code emulation
+          scancode_escape             scesc      S7     Escape for
+                                                        scancode emulation
           set0_des_seq                s0ds       s0     Shift to codeset 0
                                                         (EUC set 0, ASCII)
           set1_des_seq                s1ds       s1     Shift to codeset 1
@@ -1048,89 +1098,87 @@
           set_lr_margin               smglr      ML     Set both left and
                                                         right margins to
                                                         #1, #2.  (ML is
-                                                        not in BSD term-
-                                                        cap).
-
-
+                                                        not in BSD
+                                                        termcap).
           set_page_length             slines     YZ     Set page length to
                                                         #1 lines
           set_tb_margin               smgtb      MT     Sets both top and
                                                         bottom margins to
                                                         #1, #2
 
-        The XSI Curses standard added these hardcopy capabilities.  They  were
-        used  in  some post-4.1 versions of System V curses, e.g., Solaris 2.5
-        and IRIX 6.x.  Except for <STRONG>YI</STRONG>, the <STRONG>ncurses</STRONG> termcap names for  them  are
-        invented.   According to the XSI Curses standard, they have no termcap
-        names.  If your compiled terminfo entries use these, they may  not  be
+        The  XSI Curses standard added these hardcopy capabilities.  They were
+        used in some post-4.1 versions of System V curses, e.g.,  Solaris  2.5
+        and  IRIX  6.x.  Except for <B>YI</B>, the <B>ncurses</B> termcap names for them are
+        invented.  According to the XSI Curses standard, they have no  termcap
+        names.   If  your compiled terminfo entries use these, they may not be
         binary-compatible with System V terminfo entries after SVr4.1; beware!
 
 
-                  <STRONG>Variable</STRONG>            <STRONG>Cap-</STRONG>      <STRONG>TCap</STRONG>       <STRONG>Description</STRONG>
-                   <STRONG>String</STRONG>             <STRONG>name</STRONG>      <STRONG>Code</STRONG>
+                  <B>Variable</B>            <B>Cap-</B>      <B>TCap</B>       <B>Description</B>
+                   <B>String</B>             <B>name</B>      <B>Code</B>
           enter_horizontal_hl_mode    ehhlm     Xh     Enter horizontal
                                                        highlight mode
           enter_left_hl_mode          elhlm     Xl     Enter left highlight
                                                        mode
           enter_low_hl_mode           elohlm    Xo     Enter low highlight
                                                        mode
-          enter_right_hl_mode         erhlm     Xr     Enter right high-
-                                                       light mode
+          enter_right_hl_mode         erhlm     Xr     Enter right
+                                                       highlight mode
           enter_top_hl_mode           ethlm     Xt     Enter top highlight
                                                        mode
-          enter_vertical_hl_mode      evhlm     Xv     Enter vertical high-
-                                                       light mode
+          enter_vertical_hl_mode      evhlm     Xv     Enter vertical
+                                                       highlight mode
           set_a_attributes            sgr1      sA     Define second set of
                                                        video attributes
                                                        #1-#6
           set_pglen_inch              slength   YI     Set page length to
                                                        #1 hundredth of an
-                                                       inch (some implemen-
-                                                       tations use sL for
-                                                       termcap).
+                                                       inch (some
+                                                       implementations use
+                                                       sL for termcap).
 
 
 </PRE><H3><a name="h3-User-Defined-Capabilities">User-Defined Capabilities</a></H3><PRE>
-       The  preceding  section  listed the <EM>predefined</EM> capabilities.  They deal
-       with some special features for terminals no longer (or possibly  never)
-       produced.   Occasionally  there are special features of newer terminals
-       which are awkward or impossible to represent by reusing the  predefined
+       The preceding section listed the <I>predefined</I>  capabilities.   They  deal
+       with  some special features for terminals no longer (or possibly never)
+       produced.  Occasionally there are special features of  newer  terminals
+       which  are awkward or impossible to represent by reusing the predefined
        capabilities.
 
-       <STRONG>ncurses</STRONG>  addresses  this  limitation by allowing user-defined capabili-
-       ties.  The <STRONG>tic</STRONG> and <STRONG>infocmp</STRONG> programs provide the <STRONG>-x</STRONG> option for this pur-
-       pose.  When <STRONG>-x</STRONG> is set, <STRONG>tic</STRONG> treats unknown capabilities as user-defined.
-       That is, if <STRONG>tic</STRONG> encounters a capability name which it does  not  recog-
-       nize,  it  infers  its type (boolean, number or string) from the syntax
-       and  makes  an  extended  table  entry  for   that   capability.    The
-       <STRONG><A HREF="curs_extend.3x.html">use_extended_names(3x)</A></STRONG>  function  makes  this information conditionally
-       available to applications.  The ncurses library provides the data leav-
-       ing most of the behavior to applications:
-
-       <STRONG>o</STRONG>   User-defined  capability  strings  whose  name  begins with "k" are
+       <B>ncurses</B>   addresses   this   limitation   by   allowing    user-defined
+       capabilities.   The  <B>tic</B> and <B>infocmp</B> programs provide the <B>-x</B> option for
+       this purpose.  When <B>-x</B> is set, <B>tic</B> treats unknown capabilities as user-
+       defined.   That  is,  if <B>tic</B> encounters a capability name which it does
+       not recognize, it infers its type (boolean, number or string) from  the
+       syntax  and  makes  an  extended  table entry for that capability.  The
+       <B><A HREF="curs_extend.3X.html">use_extended_names(3X)</A></B> function makes  this  information  conditionally
+       available  to  applications.   The  ncurses  library  provides the data
+       leaving most of the behavior to applications:
+
+       <B>o</B>   User-defined capability strings whose  name  begins  with  "k"  are
            treated as function keys.
 
-       <STRONG>o</STRONG>   The types (boolean,  number,  string)  determined  by  <STRONG>tic</STRONG>  can  be
-           inferred by successful calls on <STRONG>tigetflag</STRONG>, etc.
+       <B>o</B>   The  types  (boolean,  number,  string)  determined  by  <B>tic</B> can be
+           inferred by successful calls on <B>tigetflag</B>, etc.
 
-       <STRONG>o</STRONG>   If the capability name happens to be two characters, the capability
+       <B>o</B>   If the capability name happens to be two characters, the capability
            is also available through the termcap interface.
 
-       While termcap is said to be extensible because it does not use a prede-
-       fined set of capabilities, in practice it has been limited to the capa-
-       bilities defined by terminfo implementations.  As a rule,  user-defined
-       capabilities intended for use by termcap applications should be limited
-       to booleans and numbers to avoid  running  past  the  1023  byte  limit
-       assumed by termcap implementations and their applications.  In particu-
-       lar, providing extended sets of function keys  (past  the  60  numbered
-       keys  and  the  handful  of  special named keys) is best done using the
-       longer names available using terminfo.
+       While  termcap  is  said  to  be  extensible  because it does not use a
+       predefined set of capabilities, in practice it has been limited to  the
+       capabilities  defined  by  terminfo  implementations.  As a rule, user-
+       defined capabilities intended for use by termcap applications should be
+       limited  to  booleans  and  numbers to avoid running past the 1023 byte
+       limit assumed by termcap implementations and  their  applications.   In
+       particular,  providing  extended  sets  of  function  keys (past the 60
+       numbered keys and the handful of special named keys) is best done using
+       the longer names available using terminfo.
 
 
 </PRE><H3><a name="h3-A-Sample-Entry">A Sample Entry</a></H3><PRE>
-       The following entry, describing an ANSI-standard terminal, is represen-
-       tative  of  what a <STRONG>terminfo</STRONG> entry for a modern terminal typically looks
-       like.
+       The   following   entry,   describing  an  ANSI-standard  terminal,  is
+       representative of what a <B>terminfo</B> entry for a modern terminal typically
+       looks like.
 
        ansi|ansi/pc-term compatible with color,
                am, mc5i, mir, msgr,
@@ -1163,146 +1211,145 @@
                smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
                u8=\E[?%[;0123456789]c, u9=\E[c, vpa=\E[%i%p1%dd,
 
-       Entries may continue onto multiple lines by placing white space at  the
-       beginning  of  each line except the first.  Comments may be included on
-       lines beginning with "#".  Capabilities in <EM>terminfo</EM> are of three types:
+       Entries  may continue onto multiple lines by placing white space at the
+       beginning of each line except the first.  Comments may be  included  on
+       lines beginning with "#".  Capabilities in <I>terminfo</I> are of three types:
 
-       <STRONG>o</STRONG>   Boolean capabilities which indicate that the terminal has some par-
-           ticular feature,
+       <B>o</B>   Boolean  capabilities  which  indicate  that  the terminal has some
+           particular feature,
 
-       <STRONG>o</STRONG>   numeric capabilities giving the size of the terminal or the size of
+       <B>o</B>   numeric capabilities giving the size of the terminal or the size of
            particular delays, and
 
-       <STRONG>o</STRONG>   string capabilities, which give a sequence which  can  be  used  to
+       <B>o</B>   string  capabilities,  which  give  a sequence which can be used to
            perform particular terminal operations.
 
 
 </PRE><H3><a name="h3-Types-of-Capabilities">Types of Capabilities</a></H3><PRE>
        All capabilities have names.  For instance, the fact that ANSI-standard
-       terminals have <EM>automatic</EM> <EM>margins</EM> (i.e., an automatic return  and  line-
-       feed  when the end of a line is reached) is indicated by the capability
-       <STRONG>am</STRONG>.  Hence the description of ansi includes <STRONG>am</STRONG>.   Numeric  capabilities
-       are  followed  by  the  character  "#" and then a positive value.  Thus
-       <STRONG>cols</STRONG>, which indicates the number of columns the terminal has, gives the
-       value  "80" for ansi.  Values for numeric capabilities may be specified
-       in decimal, octal or hexadecimal, using the C programming language con-
-       ventions (e.g., 255, 0377 and 0xff or 0xFF).
-
-       Finally,  string  valued capabilities, such as <STRONG>el</STRONG> (clear to end of line
-       sequence) are given by the two-character  code,  an  "=",  and  then  a
+       terminals  have  <I>automatic</I> <I>margins</I> (i.e., an automatic return and line-
+       feed when the end of a line is reached) is indicated by the  capability
+       <B>am</B>.   Hence  the description of ansi includes <B>am</B>.  Numeric capabilities
+       are followed by the character "#" and  then  a  positive  value.   Thus
+       <B>cols</B>, which indicates the number of columns the terminal has, gives the
+       value "80" for ansi.  Values for numeric capabilities may be  specified
+       in  decimal,  octal  or  hexadecimal,  using the C programming language
+       conventions (e.g., 255, 0377 and 0xff or 0xFF).
+
+       Finally, string valued capabilities, such as <B>el</B> (clear to end  of  line
+       sequence)  are  given  by  the  two-character  code, an "=", and then a
        string ending at the next following ",".
 
-       A number of escape sequences are provided in the string valued capabil-
-       ities for easy encoding of characters there:
+       A number  of  escape  sequences  are  provided  in  the  string  valued
+       capabilities for easy encoding of characters there:
 
-       <STRONG>o</STRONG>   Both <STRONG>\E</STRONG> and <STRONG>\e</STRONG> map to an ESCAPE character,
+       <B>o</B>   Both <B>\E</B> and <B>\e</B> map to an ESCAPE character,
 
-       <STRONG>o</STRONG>   <STRONG>^x</STRONG> maps to a control-x for any appropriate <EM>x</EM>, and
+       <B>o</B>   <B>^x</B> maps to a control-x for any appropriate <I>x</I>, and
 
-       <STRONG>o</STRONG>   the sequences
+       <B>o</B>   the sequences
 
-             <STRONG>\n</STRONG>, <STRONG>\l</STRONG>, <STRONG>\r</STRONG>, <STRONG>\t</STRONG>, <STRONG>\b</STRONG>, <STRONG>\f</STRONG>, and <STRONG>\s</STRONG>
+             <B>\n</B>, <B>\l</B>, <B>\r</B>, <B>\t</B>, <B>\b</B>, <B>\f</B>, and <B>\s</B>
 
            produce
 
-             <EM>newline</EM>, <EM>line-feed</EM>, <EM>return</EM>, <EM>tab</EM>, <EM>backspace</EM>, <EM>form-feed</EM>, and <EM>space</EM>,
+             <I>newline</I>, <I>line-feed</I>, <I>return</I>, <I>tab</I>, <I>backspace</I>, <I>form-feed</I>, and <I>space</I>,
 
            respectively.
 
-       X/Open Curses does not say what "appropriate <EM>x</EM>" might be.  In practice,
-       that  is a printable ASCII graphic character.  The special case "^?" is
-       interpreted as DEL (127).  In all other cases, the character  value  is
-       AND'd  with 0x1f, mapping to ASCII control codes in the range 0 through
+       X/Open Curses does not say what "appropriate <I>x</I>" might be.  In practice,
+       that is a printable ASCII graphic character.  The special case "^?"  is
+       interpreted  as  DEL (127).  In all other cases, the character value is
+       AND'd with 0x1f, mapping to ASCII control codes in the range 0  through
        31.
 
        Other escapes include
 
-       <STRONG>o</STRONG>   <STRONG>\^</STRONG> for <STRONG>^</STRONG>,
+       <B>o</B>   <B>\^</B> for <B>^</B>,
 
-       <STRONG>o</STRONG>   <STRONG>\\</STRONG> for <STRONG>\</STRONG>,
+       <B>o</B>   <B>\\</B> for <B>\</B>,
 
-       <STRONG>o</STRONG>   <STRONG>\</STRONG>, for comma,
+       <B>o</B>   <B>\</B>, for comma,
 
-       <STRONG>o</STRONG>   <STRONG>\:</STRONG> for <STRONG>:</STRONG>,
+       <B>o</B>   <B>\:</B> for <B>:</B>,
 
-       <STRONG>o</STRONG>   and <STRONG>\0</STRONG> for null.
+       <B>o</B>   and <B>\0</B> for null.
 
-           <STRONG>\0</STRONG> will produce \200, which does not terminate a string but behaves
-           as  a null character on most terminals, providing CS7 is specified.
-           See <STRONG>stty(1)</STRONG>.
+           <B>\0</B> will produce \200, which does not terminate a string but behaves
+           as a null character on most terminals, providing CS7 is  specified.
+           See <B>stty(1)</B>.
 
-           The reason for this quirk is to maintain  binary  compatibility  of
-           the  compiled  terminfo files with other implementations, e.g., the
-           SVr4 systems, which document this.   Compiled  terminfo  files  use
-           null-terminated  strings,  with  no  lengths.  Modifying this would
-           require a new binary format, which would not work with other imple-
-           mentations.
+           The  reason  for  this quirk is to maintain binary compatibility of
+           the compiled terminfo files with other implementations,  e.g.,  the
+           SVr4  systems,  which  document  this.  Compiled terminfo files use
+           null-terminated strings, with no  lengths.   Modifying  this  would
+           require  a  new  binary  format,  which  would  not work with other
+           implementations.
 
-       Finally, characters may be given as three octal digits after a <STRONG>\</STRONG>.
+       Finally, characters may be given as three octal digits after a <B>\</B>.
 
-       A  delay  in  milliseconds  may appear anywhere in a string capability,
-       enclosed in $&lt;..&gt; brackets, as in <STRONG>el</STRONG>=\EK$&lt;5&gt;,  and  padding  characters
-       are supplied by <STRONG><A HREF="curs_terminfo.3x.html">tputs(3x)</A></STRONG> to provide this delay.
+       A delay in milliseconds may appear anywhere  in  a  string  capability,
+       enclosed  in  $&lt;..&gt;  brackets, as in <B>el</B>=\EK$&lt;5&gt;, and padding characters
+       are supplied by <B><A HREF="curs_terminfo.3X.html">tputs(3X)</A></B> to provide this delay.
 
-       <STRONG>o</STRONG>   The delay must be a number with at most one decimal place of preci-
-           sion; it may be followed by suffixes "*" or "/" or both.
+       <B>o</B>   The delay must be a number  with  at  most  one  decimal  place  of
+           precision; it may be followed by suffixes "*" or "/" or both.
 
-       <STRONG>o</STRONG>   A "*" indicates that the padding required is  proportional  to  the
-           number  of lines affected by the operation, and the amount given is
-           the per-affected-unit padding required.  (In  the  case  of  insert
-           character, the factor is still the number of <EM>lines</EM> affected.)
+       <B>o</B>   A  "*"  indicates  that the padding required is proportional to the
+           number of lines affected by the operation, and the amount given  is
+           the  per-affected-unit  padding  required.   (In the case of insert
+           character, the factor is still the number of <I>lines</I> affected.)
 
-           Normally, padding is advisory if the device has the <STRONG>xon</STRONG> capability;
+           Normally, padding is advisory if the device has the <B>xon</B> capability;
            it is used for cost computation but does not trigger delays.
 
-       <STRONG>o</STRONG>   A "/" suffix indicates that the padding is mandatory and  forces  a
+       <B>o</B>   A  "/"  suffix indicates that the padding is mandatory and forces a
            delay of the given number of milliseconds even on devices for which
-           <STRONG>xon</STRONG> is present to indicate flow control.
+           <B>xon</B> is present to indicate flow control.
 
-       Sometimes individual capabilities must be commented out.  To  do  this,
-       put  a  period before the capability name.  For example, see the second
-       <STRONG>ind</STRONG> in the example above.
+       Sometimes  individual  capabilities must be commented out.  To do this,
+       put a period before the capability name.  For example, see  the  second
+       <B>ind</B> in the example above.
 
 
 </PRE><H3><a name="h3-Fetching-Compiled-Descriptions">Fetching Compiled Descriptions</a></H3><PRE>
-       The <STRONG>ncurses</STRONG> library  searches  for  terminal  descriptions  in  several
-       places.   It  uses only the first description found.  The library has a
-       compiled-in list of places to search which can be overridden  by  envi-
-       ronment  variables.   Before  starting  to  search,  <STRONG>ncurses</STRONG> eliminates
+       The  <B>ncurses</B>  library  searches  for  terminal  descriptions in several
+       places.  It uses only the first description found.  The library  has  a
+       compiled-in  list  of  places  to  search  which  can  be overridden by
+       environment variables.  Before starting to search,  <B>ncurses</B>  eliminates
        duplicates in its search list.
 
-       <STRONG>o</STRONG>   If the environment variable TERMINFO is set, it is  interpreted  as
+       <B>o</B>   If  the  environment variable TERMINFO is set, it is interpreted as
            the pathname of a directory containing the compiled description you
            are working on.  Only that directory is searched.
 
-       <STRONG>o</STRONG>   If TERMINFO is not set, <STRONG>ncurses</STRONG> will instead look in the  directory
-           <STRONG>$HOME/.terminfo</STRONG> for a compiled description.
+       <B>o</B>   If  TERMINFO is not set, <B>ncurses</B> will instead look in the directory
+           <B>$HOME/.terminfo</B> for a compiled description.
 
-       <STRONG>o</STRONG>   Next,  if  the  environment  variable TERMINFO_DIRS is set, <STRONG>ncurses</STRONG>
-           will interpret the contents of that variable as a  list  of  colon-
+       <B>o</B>   Next, if the environment variable  TERMINFO_DIRS  is  set,  <B>ncurses</B>
+           will  interpret  the  contents of that variable as a list of colon-
            separated directories (or database files) to be searched.
 
-           An  empty directory name (i.e., if the variable begins or ends with
-           a colon, or contains adjacent colons) is interpreted as the  system
-           location <EM>/usr/share/terminfo</EM>.
+           An empty directory name (i.e., if the variable begins or ends  with
+           a  colon, or contains adjacent colons) is interpreted as the system
+           location <I>/usr/share/terminfo</I>.
 
-       <STRONG>o</STRONG>   Finally, <STRONG>ncurses</STRONG> searches these compiled-in locations:
+       <B>o</B>   Finally, <B>ncurses</B> searches these compiled-in locations:
 
-           <STRONG>o</STRONG>   a    list    of    directories   (/usr/local/ncurses/share/ter-
-               minfo:/usr/share/terminfo), and
+           <B>o</B>   a list of directories (no default value), and
 
-           <STRONG>o</STRONG>   the system terminfo directory,  <EM>/usr/share/terminfo</EM>  (the  com-
-               piled-in default).
+           <B>o</B>   the  system  terminfo   directory,   <I>/usr/share/terminfo</I>   (the
+               compiled-in default).
 
 
 </PRE><H3><a name="h3-Preparing-Descriptions">Preparing Descriptions</a></H3><PRE>
        We  now  outline  how  to  prepare descriptions of terminals.  The most
        effective way to prepare a terminal description  is  by  imitating  the
-       description  of  a  similar  terminal  in  <EM>terminfo</EM>  and  to build up a
-       description gradually, using partial descriptions with <EM>vi</EM> or some other
+       description  of  a  similar  terminal  in  <I>terminfo</I>  and  to build up a
+       description gradually, using partial descriptions with <I>vi</I> or some other
        screen-oriented  program to check that they are correct.  Be aware that
        a very unusual terminal may expose deficiencies in the ability  of  the
-       <EM>terminfo</EM> file to describe it or bugs in the screen-handling code of the
+       <I>terminfo</I> file to describe it or bugs in the screen-handling code of the
        test program.
 
        To get the padding for insert line right (if the terminal  manufacturer
@@ -1314,60 +1361,60 @@
 
 </PRE><H3><a name="h3-Basic-Capabilities">Basic Capabilities</a></H3><PRE>
        The number of columns on each line for the terminal  is  given  by  the
-       <STRONG>cols</STRONG>  numeric capability.  If the terminal is a CRT, then the number of
-       lines on the screen is given by the <STRONG>lines</STRONG> capability.  If the  terminal
+       <B>cols</B>  numeric capability.  If the terminal is a CRT, then the number of
+       lines on the screen is given by the <B>lines</B> capability.  If the  terminal
        wraps  around  to  the  beginning  of the next line when it reaches the
-       right margin, then it should have the <STRONG>am</STRONG> capability.  If  the  terminal
+       right margin, then it should have the <B>am</B> capability.  If  the  terminal
        can  clear  its  screen,  leaving the cursor in the home position, then
-       this is given by the <STRONG>clear</STRONG> string capability.  If  the  terminal  over-
-       strikes  (rather  than  clearing  a position when a character is struck
-       over) then it should have the <STRONG>os</STRONG> capability.   If  the  terminal  is  a
-       printing terminal, with no soft copy unit, give it both <STRONG>hc</STRONG> and <STRONG>os</STRONG>.  (<STRONG>os</STRONG>
+       this is  given  by  the  <B>clear</B>  string  capability.   If  the  terminal
+       overstrikes (rather than clearing a position when a character is struck
+       over) then it should have the <B>os</B> capability.   If  the  terminal  is  a
+       printing terminal, with no soft copy unit, give it both <B>hc</B> and <B>os</B>.  (<B>os</B>
        applies to storage scope terminals, such as TEKTRONIX 4010  series,  as
        well  as  hard copy and APL terminals.)  If there is a code to move the
-       cursor to the left edge of the current row, give this as <STRONG>cr</STRONG>.  (Normally
-       this  will  be carriage return, control M.)  If there is a code to pro-
-       duce an audible signal (bell, beep, etc) give this as <STRONG>bel</STRONG>.
+       cursor to the left edge of the current row, give this as <B>cr</B>.  (Normally
+       this  will  be  carriage  return,  control/M.)   If  there is a code to
+       produce an audible signal (bell, beep, etc) give this as <B>bel</B>.
 
        If there is a code to move the cursor one position to the left (such as
-       backspace)  that  capability should be given as <STRONG>cub1</STRONG>.  Similarly, codes
-       to move to the right, up, and down should be given as <STRONG>cuf1</STRONG>,  <STRONG>cuu1</STRONG>,  and
-       <STRONG>cud1</STRONG>.   These  local cursor motions should not alter the text they pass
-       over, for example, you would not  normally  use  "<STRONG>cuf1</STRONG>= "  because  the
+       backspace)  that  capability should be given as <B>cub1</B>.  Similarly, codes
+       to move to the right, up, and down should be given as <B>cuf1</B>,  <B>cuu1</B>,  and
+       <B>cud1</B>.   These  local cursor motions should not alter the text they pass
+       over, for example, you would not  normally  use  "<B>cuf1</B>= "  because  the
        space would erase the character moved over.
 
        A very important point here is that the local cursor motions encoded in
-       <EM>terminfo</EM> are undefined at the left and top edges  of  a  CRT  terminal.
+       <I>terminfo</I> are undefined at the left and top edges  of  a  CRT  terminal.
        Programs should never attempt to backspace around the left edge, unless
-       <STRONG>bw</STRONG> is given, and never attempt to go up locally off the top.  In  order
+       <B>bw</B> is given, and never attempt to go up locally off the top.  In  order
        to  scroll  text up, a program will go to the bottom left corner of the
-       screen and send the <STRONG>ind</STRONG> (index) string.
+       screen and send the <B>ind</B> (index) string.
 
        To scroll text down, a program goes to  the  top  left  corner  of  the
-       screen and sends the <STRONG>ri</STRONG> (reverse index) string.  The strings <STRONG>ind</STRONG> and <STRONG>ri</STRONG>
+       screen and sends the <B>ri</B> (reverse index) string.  The strings <B>ind</B> and <B>ri</B>
        are undefined when not on their respective corners of the screen.
 
-       Parameterized versions of the scrolling  sequences  are  <STRONG>indn</STRONG>  and  <STRONG>rin</STRONG>
-       which  have  the same semantics as <STRONG>ind</STRONG> and <STRONG>ri</STRONG> except that they take one
+       Parameterized versions of the scrolling  sequences  are  <B>indn</B>  and  <B>rin</B>
+       which  have  the same semantics as <B>ind</B> and <B>ri</B> except that they take one
        parameter, and scroll that many lines.  They are also undefined  except
        at the appropriate edge of the screen.
 
-       The  <STRONG>am</STRONG> capability tells whether the cursor sticks at the right edge of
+       The  <B>am</B> capability tells whether the cursor sticks at the right edge of
        the screen when text is output, but this does not necessarily apply  to
-       a  <STRONG>cuf1</STRONG>  from  the last column.  The only local motion which is defined
-       from the left edge is if <STRONG>bw</STRONG> is given, then a <STRONG>cub1</STRONG> from  the  left  edge
-       will  move  to the right edge of the previous row.  If <STRONG>bw</STRONG> is not given,
+       a  <B>cuf1</B>  from  the last column.  The only local motion which is defined
+       from the left edge is if <B>bw</B> is given, then a <B>cub1</B> from  the  left  edge
+       will  move  to the right edge of the previous row.  If <B>bw</B> is not given,
        the effect is undefined.  This is useful for drawing a box  around  the
        edge of the screen, for example.  If the terminal has switch selectable
-       automatic margins, the <EM>terminfo</EM> file usually assumes that this  is  on;
-       i.e.,  <STRONG>am</STRONG>.  If the terminal has a command which moves to the first col-
-       umn of the next line, that command can be given as <STRONG>nel</STRONG>  (newline).   It
-       does  not  matter  if  the  command clears the remainder of the current
-       line, so if the terminal has no <STRONG>cr</STRONG> and <STRONG>lf</STRONG> it may still be  possible  to
-       craft a working <STRONG>nel</STRONG> out of one or both of them.
+       automatic margins, the <I>terminfo</I> file usually assumes that this  is  on;
+       i.e.,  <B>am</B>.   If  the  terminal  has  a command which moves to the first
+       column of the next line, that command can be given  as  <B>nel</B>  (newline).
+       It  does  not matter if the command clears the remainder of the current
+       line, so if the terminal has no <B>cr</B> and <B>lf</B> it may still be  possible  to
+       craft a working <B>nel</B> out of one or both of them.
 
-       These capabilities suffice to describe hard-copy and "glass-tty" termi-
-       nals.  Thus the model 33 teletype is described as
+       These  capabilities  suffice  to  describe  hard-copy  and  "glass-tty"
+       terminals.  Thus the model 33 teletype is described as
 
        33|tty33|tty|model 33 teletype,
                bel=^G, cols#72, cr=^M, cud1=^J, hc, ind=^J, os,
@@ -1380,112 +1427,112 @@
 
 
 </PRE><H3><a name="h3-Parameterized-Strings">Parameterized Strings</a></H3><PRE>
-       Cursor addressing and other strings requiring parameters in the  termi-
-       nal  are  described  by a parameterized string capability, with <EM>printf</EM>-
-       like escapes such as <EM>%x</EM> in it.  For example, to address the cursor, the
-       <STRONG>cup</STRONG>  capability  is  given, using two parameters: the row and column to
-       address to.  (Rows and columns are numbered from zero and refer to  the
-       physical screen visible to the user, not to any unseen memory.)  If the
-       terminal has memory relative cursor addressing, that can  be  indicated
-       by <STRONG>mrcup</STRONG>.
-
-       The  parameter mechanism uses a stack and special <STRONG>%</STRONG> codes to manipulate
+       Cursor  addressing  and  other  strings  requiring  parameters  in  the
+       terminal  are  described  by  a  parameterized  string capability, with
+       <I>printf</I>-like escapes such as <I>%x</I> in it.   For  example,  to  address  the
+       cursor,  the <B>cup</B> capability is given, using two parameters: the row and
+       column to address to.  (Rows and columns are  numbered  from  zero  and
+       refer  to  the  physical  screen visible to the user, not to any unseen
+       memory.)  If the terminal has memory relative cursor  addressing,  that
+       can be indicated by <B>mrcup</B>.
+
+       The  parameter mechanism uses a stack and special <B>%</B> codes to manipulate
        it.  Typically a sequence will push one  of  the  parameters  onto  the
-       stack  and  then print it in some format.  Print (e.g., "%d") is a spe-
-       cial case.  Other operations, including "%t" pop their operand from the
-       stack.   It  is noted that more complex operations are often necessary,
-       e.g., in the <STRONG>sgr</STRONG> string.
+       stack  and  then  print  it  in  some  format.  Print (e.g., "%d") is a
+       special case.  Other operations, including "%t" pop their operand  from
+       the  stack.   It  is  noted  that  more  complex  operations  are often
+       necessary, e.g., in the <B>sgr</B> string.
 
-       The <STRONG>%</STRONG> encodings have the following meanings:
+       The <B>%</B> encodings have the following meanings:
 
-       <STRONG>%%</STRONG>   outputs "%"
+       <B>%%</B>   outputs "%"
 
-       <STRONG>%</STRONG><EM>[[</EM>:<EM>]flags][width[.precision]][</EM><STRONG>doxXs</STRONG><EM>]</EM>
-            as in <STRONG>printf</STRONG>, flags are <EM>[-+#]</EM> and <EM>space</EM>.  Use a ":" to  allow  the
-            next  character to be a "-" flag, avoiding interpreting "%-" as an
-            operator.
+       <B>%</B><I>[[</I>:<I>]flags][width[.precision]][</I><B>doxXs</B><I>]</I>
+            as in <B>printf(3)</B>, flags are <I>[-+#]</I> and <I>space</I>.  Use a  ":"  to  allow
+            the next character to be a "-" flag, avoiding interpreting "%-" as
+            an operator.
 
-       %c   print <EM>pop()</EM> like %c in <STRONG>printf</STRONG>
+       %c   print <I>pop()</I> like %c in <B>printf</B>
 
-       <STRONG>%s</STRONG>   print <EM>pop()</EM> like %s in <STRONG>printf</STRONG>
+       <B>%s</B>   print <I>pop()</I> like %s in <B>printf</B>
 
-       <STRONG>%p</STRONG><EM>[1-9]</EM>
-            push <EM>i</EM>'th parameter
+       <B>%p</B><I>[1-9]</I>
+            push <I>i</I>'th parameter
 
-       <STRONG>%P</STRONG><EM>[a-z]</EM>
-            set dynamic variable <EM>[a-z]</EM> to <EM>pop()</EM>
+       <B>%P</B><I>[a-z]</I>
+            set dynamic variable <I>[a-z]</I> to <I>pop()</I>
 
-       <STRONG>%g</STRONG><EM>[a-z]/</EM>
-            get dynamic variable <EM>[a-z]</EM> and push it
+       <B>%g</B><I>[a-z]/</I>
+            get dynamic variable <I>[a-z]</I> and push it
 
-       <STRONG>%P</STRONG><EM>[A-Z]</EM>
-            set static variable <EM>[a-z]</EM> to <EM>pop()</EM>
+       <B>%P</B><I>[A-Z]</I>
+            set static variable <I>[a-z]</I> to <I>pop()</I>
 
-       <STRONG>%g</STRONG><EM>[A-Z]</EM>
-            get static variable <EM>[a-z]</EM> and push it
+       <B>%g</B><I>[A-Z]</I>
+            get static variable <I>[a-z]</I> and push it
 
             The terms "static" and "dynamic"  are  misleading.   Historically,
             these are simply two different sets of variables, whose values are
-            not reset between calls to <STRONG><A HREF="curs_terminfo.3x.html">tparm(3x)</A></STRONG>.  However, that fact  is  not
+            not reset between calls to <B><A HREF="curs_terminfo.3X.html">tparm(3X)</A></B>.  However, that fact  is  not
             documented in other implementations.  Relying on it will adversely
             impact portability to other implementations.
 
-       <STRONG>%'</STRONG><EM>c</EM><STRONG>'</STRONG> char constant <EM>c</EM>
+       <B>%'</B><I>c</I><B>'</B> char constant <I>c</I>
 
-       <STRONG>%{</STRONG><EM>nn</EM><STRONG>}</STRONG>
-            integer constant <EM>nn</EM>
+       <B>%{</B><I>nn</I><B>}</B>
+            integer constant <I>nn</I>
 
-       <STRONG>%l</STRONG>   push strlen(pop)
+       <B>%l</B>   push strlen(pop)
 
-       <STRONG>%+</STRONG>, <STRONG>%-</STRONG>, <STRONG>%*</STRONG>, <STRONG>%/</STRONG>, <STRONG>%m</STRONG>
-            arithmetic (%m is <EM>mod</EM>): <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
+       <B>%+</B>, <B>%-</B>, <B>%*</B>, <B>%/</B>, <B>%m</B>
+            arithmetic (%m is <I>mod</I>): <I>push(pop()</I> <I>op</I> <I>pop())</I>
 
-       <STRONG>%&amp;</STRONG>, <STRONG>%|</STRONG>, <STRONG>%^</STRONG>
-            bit operations (AND, OR and exclusive-OR): <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
+       <B>%&amp;</B>, <B>%|</B>, <B>%^</B>
+            bit operations (AND, OR and exclusive-OR): <I>push(pop()</I> <I>op</I> <I>pop())</I>
 
-       <STRONG>%=</STRONG>, <STRONG>%&gt;</STRONG>, <STRONG>%&lt;</STRONG>
-            logical operations: <EM>push(pop()</EM> <EM>op</EM> <EM>pop())</EM>
+       <B>%=</B>, <B>%&gt;</B>, <B>%&lt;</B>
+            logical operations: <I>push(pop()</I> <I>op</I> <I>pop())</I>
 
-       <STRONG>%A</STRONG>, <STRONG>%O</STRONG>
+       <B>%A</B>, <B>%O</B>
             logical AND and OR operations (for conditionals)
 
-       <STRONG>%!</STRONG>, <STRONG>%~</STRONG>
-            unary operations (logical and bit complement): <EM>push(op</EM> <EM>pop())</EM>
+       <B>%!</B>, <B>%~</B>
+            unary operations (logical and bit complement): <I>push(op</I> <I>pop())</I>
 
-       <STRONG>%i</STRONG>   add 1 to first two parameters (for ANSI terminals)
+       <B>%i</B>   add 1 to first two parameters (for ANSI terminals)
 
-       <STRONG>%?</STRONG> <EM>expr</EM> <STRONG>%t</STRONG> <EM>thenpart</EM> <STRONG>%e</STRONG> <EM>elsepart</EM> <STRONG>%;</STRONG>
-            This forms an if-then-else.  The <STRONG>%e</STRONG> <EM>elsepart</EM> is optional.  Usually
-            the  <STRONG>%?</STRONG>  <EM>expr</EM>  part  pushes a value onto the stack, and <STRONG>%t</STRONG> pops it
+       <B>%?</B> <I>expr</I> <B>%t</B> <I>thenpart</I> <B>%e</B> <I>elsepart</I> <B>%;</B>
+            This forms an if-then-else.  The <B>%e</B> <I>elsepart</I> is optional.  Usually
+            the  <B>%?</B>  <I>expr</I>  part  pushes a value onto the stack, and <B>%t</B> pops it
             from the stack, testing if it is nonzero (true).  If  it  is  zero
-            (false), control passes to the <STRONG>%e</STRONG> (else) part.
+            (false), control passes to the <B>%e</B> (else) part.
 
             It is possible to form else-if's a la Algol 68:
-            <STRONG>%?</STRONG> c1 <STRONG>%t</STRONG> b1 <STRONG>%e</STRONG> c2 <STRONG>%t</STRONG> b2 <STRONG>%e</STRONG> c3 <STRONG>%t</STRONG> b3 <STRONG>%e</STRONG> c4 <STRONG>%t</STRONG> b4 <STRONG>%e</STRONG> <STRONG>%;</STRONG>
+            <B>%?</B> c1 <B>%t</B> b1 <B>%e</B> c2 <B>%t</B> b2 <B>%e</B> c3 <B>%t</B> b3 <B>%e</B> c4 <B>%t</B> b4 <B>%e</B> <B>%;</B>
 
             where ci are conditions, bi are bodies.
 
-            Use  the  <STRONG>-f</STRONG>  option of <STRONG>tic</STRONG> or <STRONG>infocmp</STRONG> to see the structure of if-
-            then-else's.  Some strings, e.g., <STRONG>sgr</STRONG> can be very complicated when
-            written  on  one line.  The <STRONG>-f</STRONG> option splits the string into lines
+            Use  the  <B>-f</B>  option of <B>tic</B> or <B>infocmp</B> to see the structure of if-
+            then-else's.  Some strings, e.g., <B>sgr</B> can be very complicated when
+            written  on  one line.  The <B>-f</B> option splits the string into lines
             with the parts indented.
 
        Binary operations are in postfix form with the operands  in  the  usual
-       order.  That is, to get x-5 one would use "%gx%{5}%-".  <STRONG>%P</STRONG> and <STRONG>%g</STRONG> vari-
-       ables are persistent across escape-string evaluations.
+       order.   That  is,  to  get  x-5  one would use "%gx%{5}%-".  <B>%P</B> and <B>%g</B>
+       variables are persistent across escape-string evaluations.
 
        Consider the HP2645, which, to get to row 3 and column 12, needs to  be
        sent  \E&amp;a12c03Y padded for 6 milliseconds.  Note that the order of the
        rows and columns is inverted here, and that  the  row  and  column  are
-       printed    as    two    digits.     Thus    its   <STRONG>cup</STRONG>   capability   is
+       printed    as    two    digits.     Thus    its   <B>cup</B>   capability   is
        "cup=6\E&amp;%p2%2dc%p1%2dY".
 
        The Microterm ACT-IV needs the current row and column sent preceded  by
-       a   <STRONG>^T</STRONG>,   with   the   row   and   column  simply  encoded  in  binary,
+       a   <B>^T</B>,   with   the   row   and   column  simply  encoded  in  binary,
        "cup=^T%p1%c%p2%c".  Terminals which  use  "%c"  need  to  be  able  to
-       backspace  the cursor (<STRONG>cub1</STRONG>), and to move the cursor up one line on the
-       screen (<STRONG>cuu1</STRONG>).  This is necessary because it  is  not  always  safe  to
-       transmit  <STRONG>\n</STRONG> <STRONG>^D</STRONG> and <STRONG>\r</STRONG>, as the system may change or discard them.  (The
+       backspace  the cursor (<B>cub1</B>), and to move the cursor up one line on the
+       screen (<B>cuu1</B>).  This is necessary because it  is  not  always  safe  to
+       transmit  <B>\n</B> <B>^D</B> and <B>\r</B>, as the system may change or discard them.  (The
        library routines dealing with terminfo set tty modes so that  tabs  are
        never  expanded, so \t is safe to send.  This turns out to be essential
        for the Ann Arbor 4080.)
@@ -1501,113 +1548,115 @@
 
 </PRE><H3><a name="h3-Cursor-Motions">Cursor Motions</a></H3><PRE>
        If the terminal has a fast way to home the cursor (to very  upper  left
-       corner  of screen) then this can be given as <STRONG>home</STRONG>; similarly a fast way
-       of getting to the lower left-hand corner can be given as <STRONG>ll</STRONG>;  this  may
-       involve going up with <STRONG>cuu1</STRONG> from the home position, but a program should
-       never do this itself (unless <STRONG>ll</STRONG> does) because it can make no assumption
+       corner  of screen) then this can be given as <B>home</B>; similarly a fast way
+       of getting to the lower left-hand corner can be given as <B>ll</B>;  this  may
+       involve going up with <B>cuu1</B> from the home position, but a program should
+       never do this itself (unless <B>ll</B> does) because it can make no assumption
        about  the  effect  of moving up from the home position.  Note that the
-       home position is the same as addressing to (0,0): to the top left  cor-
-       ner of the screen, not of memory.  (Thus, the \EH sequence on HP termi-
-       nals cannot be used for <STRONG>home</STRONG>.)
+       home position is the same as addressing  to  (0,0):  to  the  top  left
+       corner  of  the  screen,  not of memory.  (Thus, the \EH sequence on HP
+       terminals cannot be used for <B>home</B>.)
 
        If the terminal has row or column absolute cursor addressing, these can
-       be  given  as  single  parameter  capabilities <STRONG>hpa</STRONG> (horizontal position
-       absolute) and <STRONG>vpa</STRONG> (vertical position absolute).   Sometimes  these  are
+       be  given  as  single  parameter  capabilities <B>hpa</B> (horizontal position
+       absolute) and <B>vpa</B> (vertical position absolute).   Sometimes  these  are
        shorter  than  the  more  general  two  parameter sequence (as with the
-       hp2645) and can be used in preference to <STRONG>cup</STRONG>.  If there are  parameter-
-       ized  local  motions  (e.g.,  move  <EM>n</EM> spaces to the right) these can be
-       given as <STRONG>cud</STRONG>, <STRONG>cub</STRONG>, <STRONG>cuf</STRONG>, and <STRONG>cuu</STRONG> with a single parameter indicating  how
-       many  spaces  to move.  These are primarily useful if the terminal does
-       not have <STRONG>cup</STRONG>, such as the TEKTRONIX 4025.
+       hp2645)  and  can  be  used  in  preference  to  <B>cup</B>.   If  there   are
+       parameterized  local  motions  (e.g., move <I>n</I> spaces to the right) these
+       can be given as  <B>cud</B>,  <B>cub</B>,  <B>cuf</B>,  and  <B>cuu</B>  with  a  single  parameter
+       indicating  how many spaces to move.  These are primarily useful if the
+       terminal does not have <B>cup</B>, such as the TEKTRONIX 4025.
 
        If the terminal needs to be in a special mode when  running  a  program
        that uses these capabilities, the codes to enter and exit this mode can
-       be given as <STRONG>smcup</STRONG> and <STRONG>rmcup</STRONG>.  This arises, for example, from  terminals
+       be given as <B>smcup</B> and <B>rmcup</B>.  This arises, for example, from  terminals
        like  the  Concept  with more than one page of memory.  If the terminal
-       has only memory relative cursor addressing and not screen relative cur-
-       sor addressing, a one screen-sized window must be fixed into the termi-
-       nal for cursor addressing to work properly.  This is also used for  the
-       TEKTRONIX  4025,  where  <STRONG>smcup</STRONG> sets the command character to be the one
-       used by terminfo.  If the <STRONG>smcup</STRONG> sequence will not  restore  the  screen
-       after  an  <STRONG>rmcup</STRONG>  sequence  is output (to the state prior to outputting
-       <STRONG>rmcup</STRONG>), specify <STRONG>nrrmc</STRONG>.
+       has only memory relative cursor  addressing  and  not  screen  relative
+       cursor  addressing,  a  one  screen-sized window must be fixed into the
+       terminal for cursor addressing to work properly.  This is also used for
+       the  TEKTRONIX  4025,  where <B>smcup</B> sets the command character to be the
+       one used by terminfo.  If the  <B>smcup</B>  sequence  will  not  restore  the
+       screen  after  an  <B>rmcup</B>  sequence  is  output  (to  the state prior to
+       outputting <B>rmcup</B>), specify <B>nrrmc</B>.
 
 
 </PRE><H3><a name="h3-Area-Clears">Area Clears</a></H3><PRE>
        If the terminal can clear from the current position to the end  of  the
-       line,  leaving  the cursor where it is, this should be given as <STRONG>el</STRONG>.  If
+       line,  leaving  the cursor where it is, this should be given as <B>el</B>.  If
        the terminal can clear from the beginning of the line  to  the  current
        position  inclusive,  leaving  the  cursor  where it is, this should be
-       given as <STRONG>el1</STRONG>.  If the terminal can clear from the current  position  to
-       the  end  of  the display, then this should be given as <STRONG>ed</STRONG>.  <STRONG>Ed</STRONG> is only
+       given as <B>el1</B>.  If the terminal can clear from the current  position  to
+       the  end  of  the display, then this should be given as <B>ed</B>.  <B>Ed</B> is only
        defined from the first column of a line.  (Thus, it can be simulated by
-       a request to delete a large number of lines, if a true <STRONG>ed</STRONG> is not avail-
-       able.)
+       a  request  to  delete  a  large  number  of lines, if a true <B>ed</B> is not
+       available.)
 
 
 </PRE><H3><a name="h3-Insert_delete-line-and-vertical-motions">Insert/delete line and vertical motions</a></H3><PRE>
        If the terminal can open a new blank line before  the  line  where  the
-       cursor  is,  this  should  be  given as <STRONG>il1</STRONG>; this is done only from the
+       cursor  is,  this  should  be  given as <B>il1</B>; this is done only from the
        first position of a line.  The cursor must then  appear  on  the  newly
        blank  line.   If  the terminal can delete the line which the cursor is
-       on, then this should be given as <STRONG>dl1</STRONG>; this is done only from the  first
-       position on the line to be deleted.  Versions of <STRONG>il1</STRONG> and <STRONG>dl1</STRONG> which take
+       on, then this should be given as <B>dl1</B>; this is done only from the  first
+       position on the line to be deleted.  Versions of <B>il1</B> and <B>dl1</B> which take
        a single parameter and insert or delete that many lines can be given as
-       <STRONG>il</STRONG> and <STRONG>dl</STRONG>.
+       <B>il</B> and <B>dl</B>.
 
        If  the  terminal  has a settable scrolling region (like the vt100) the
-       command to set this can be described with  the  <STRONG>csr</STRONG>  capability,  which
+       command to set this can be described with  the  <B>csr</B>  capability,  which
        takes two parameters: the top and bottom lines of the scrolling region.
        The cursor position is, alas, undefined after using this command.
 
-       It is possible to get the effect of insert or delete line using <STRONG>csr</STRONG>  on
-       a  properly chosen region; the <STRONG>sc</STRONG> and <STRONG>rc</STRONG> (save and restore cursor) com-
-       mands may be useful for ensuring that  your  synthesized  insert/delete
-       string  does  not  move the cursor.  (Note that the <STRONG><A HREF="ncurses.3x.html">ncurses(3x)</A></STRONG> library
+       It is possible to get the effect of insert or delete line using <B>csr</B>  on
+       a  properly  chosen  region;  the  <B>sc</B>  and <B>rc</B> (save and restore cursor)
+       commands may be useful for ensuring that your synthesized insert/delete
+       string  does  not  move the cursor.  (Note that the <B><A HREF="ncurses.3X.html">ncurses(3X)</A></B> library
        does  this  synthesis  automatically,   so   you   need   not   compose
-       insert/delete strings for an entry with <STRONG>csr</STRONG>).
+       insert/delete strings for an entry with <B>csr</B>).
 
-       Yet another way to construct insert and delete might be to use a combi-
-       nation of index with the memory-lock feature found  on  some  terminals
-       (like the HP-700/90 series, which however also has insert/delete).
+       Yet  another  way  to  construct  insert  and  delete might be to use a
+       combination of  index  with  the  memory-lock  feature  found  on  some
+       terminals   (like   the   HP-700/90  series,  which  however  also  has
+       insert/delete).
 
-       Inserting  lines  at  the  top or bottom of the screen can also be done
-       using <STRONG>ri</STRONG> or <STRONG>ind</STRONG> on many terminals without a  true  insert/delete  line,
+       Inserting lines at the top or bottom of the screen  can  also  be  done
+       using  <B>ri</B>  or  <B>ind</B> on many terminals without a true insert/delete line,
        and is often faster even on terminals with those features.
 
-       The boolean <STRONG>non_dest_scroll_region</STRONG> should be set if each scrolling win-
-       dow is effectively a view port on a screen-sized canvas.  To  test  for
-       this capability, create a scrolling region in the middle of the screen,
-       write something to the bottom line, move the cursor to the top  of  the
-       region, and do <STRONG>ri</STRONG> followed by <STRONG>dl1</STRONG> or <STRONG>ind</STRONG>.  If the data scrolled off the
-       bottom of the region by the  <STRONG>ri</STRONG>  re-appears,  then  scrolling  is  non-
-       destructive.   System  V  and XSI Curses expect that <STRONG>ind</STRONG>, <STRONG>ri</STRONG>, <STRONG>indn</STRONG>, and
-       <STRONG>rin</STRONG> will simulate destructive scrolling; their  documentation  cautions
-       you  not to define <STRONG>csr</STRONG> unless this is true.  This <STRONG>curses</STRONG> implementation
-       is more liberal and will do explicit erases after scrolling if <STRONG>ndsrc</STRONG> is
-       defined.
-
-       If  the  terminal has the ability to define a window as part of memory,
-       which all commands affect, it should  be  given  as  the  parameterized
-       string  <STRONG>wind</STRONG>.  The four parameters are the starting and ending lines in
+       The boolean <B>non_dest_scroll_region</B> should  be  set  if  each  scrolling
+       window  is  effectively  a view port on a screen-sized canvas.  To test
+       for this capability, create a scrolling region in  the  middle  of  the
+       screen,  write something to the bottom line, move the cursor to the top
+       of the region, and do <B>ri</B> followed by <B>dl1</B> or <B>ind</B>.  If the data  scrolled
+       off  the  bottom  of the region by the <B>ri</B> re-appears, then scrolling is
+       non-destructive.  System V and XSI Curses expect that  <B>ind</B>,  <B>ri</B>,  <B>indn</B>,
+       and  <B>rin</B>  will  simulate  destructive  scrolling;  their  documentation
+       cautions you not to define  <B>csr</B>  unless  this  is  true.   This  <B>curses</B>
+       implementation  is  more  liberal  and  will  do  explicit erases after
+       scrolling if <B>ndsrc</B> is defined.
+
+       If the terminal has the ability to define a window as part  of  memory,
+       which  all  commands  affect,  it  should be given as the parameterized
+       string <B>wind</B>.  The four parameters are the starting and ending lines  in
        memory and the starting and ending columns in memory, in that order.
 
-       If the terminal can retain display memory above, then the <STRONG>da</STRONG> capability
-       should  be  given;  if  display  memory  can be retained below, then <STRONG>db</STRONG>
-       should be given.  These indicate that deleting a line or scrolling  may
-       bring  non-blank lines up from below or that scrolling back with <STRONG>ri</STRONG> may
+       If the terminal can retain display memory above, then the <B>da</B> capability
+       should be given; if display memory  can  be  retained  below,  then  <B>db</B>
+       should  be given.  These indicate that deleting a line or scrolling may
+       bring non-blank lines up from below or that scrolling back with <B>ri</B>  may
        bring down non-blank lines.
 
 
 </PRE><H3><a name="h3-Insert_Delete-Character">Insert/Delete Character</a></H3><PRE>
-       There are two basic kinds of  intelligent  terminals  with  respect  to
-       insert/delete  character  which  can  be described using <EM>terminfo.</EM>  The
-       most common insert/delete character operations affect only the  charac-
-       ters  on  the current line and shift characters off the end of the line
-       rigidly.  Other terminals, such as the Concept 100 and the Perkin Elmer
-       Owl, make a distinction between typed and untyped blanks on the screen,
-       shifting upon an insert or delete only  to  an  untyped  blank  on  the
-       screen which is either eliminated, or expanded to two untyped blanks.
+       There  are  two  basic  kinds  of intelligent terminals with respect to
+       insert/delete character which can be  described  using  <I>terminfo.</I>   The
+       most   common   insert/delete  character  operations  affect  only  the
+       characters on the current line and shift characters off the end of  the
+       line  rigidly.  Other terminals, such as the Concept 100 and the Perkin
+       Elmer Owl, make a distinction between typed and untyped blanks  on  the
+       screen,  shifting  upon an insert or delete only to an untyped blank on
+       the screen which is either  eliminated,  or  expanded  to  two  untyped
+       blanks.
 
        You  can determine the kind of terminal you have by clearing the screen
        and then typing text separated by cursor  motions.   Type  "abc    def"
@@ -1617,9 +1666,9 @@
        shift rigidly and characters to fall off the end,  then  your  terminal
        does  not  distinguish  between  blanks  and untyped positions.  If the
        "abc" shifts over to the "def" which then move together around the  end
-       of  the current line and onto the next as you insert, you have the sec-
-       ond type of terminal, and should give the capability <STRONG>in</STRONG>,  which  stands
-       for "insert null".
+       of  the  current  line  and  onto  the next as you insert, you have the
+       second type of terminal, and  should  give  the  capability  <B>in</B>,  which
+       stands for "insert null".
 
        While  these  are  two  logically  separate attributes (one line versus
        multi-line insert mode, and special treatment  of  untyped  spaces)  we
@@ -1628,88 +1677,88 @@
 
        Terminfo can describe both terminals which have  an  insert  mode,  and
        terminals  which send a simple sequence to open a blank position on the
-       current line.  Give as <STRONG>smir</STRONG> the sequence to get into insert mode.  Give
-       as  <STRONG>rmir</STRONG>  the  sequence  to  leave  insert  mode.  Now give as <STRONG>ich1</STRONG> any
+       current line.  Give as <B>smir</B> the sequence to get into insert mode.  Give
+       as  <B>rmir</B>  the  sequence  to  leave  insert  mode.  Now give as <B>ich1</B> any
        sequence needed to be sent just before  sending  the  character  to  be
-       inserted.   Most  terminals with a true insert mode will not give <STRONG>ich1</STRONG>;
+       inserted.   Most  terminals with a true insert mode will not give <B>ich1</B>;
        terminals which send a sequence to open a screen position  should  give
        it here.
 
-       If  your  terminal has both, insert mode is usually preferable to <STRONG>ich1</STRONG>.
+       If  your  terminal has both, insert mode is usually preferable to <B>ich1</B>.
        Technically, you should not give  both  unless  the  terminal  actually
        requires  both to be used in combination.  Accordingly, some non-curses
        applications get confused if both are present; the symptom  is  doubled
        characters  in  an  update using insert.  This requirement is now rare;
-       most <STRONG>ich</STRONG> sequences do not require previous smir, and most  smir  insert
-       modes  do  not  require <STRONG>ich1</STRONG> before each character.  Therefore, the new
-       <STRONG>curses</STRONG> actually assumes this is the case and uses either  <STRONG>rmir</STRONG>/<STRONG>smir</STRONG>  or
-       <STRONG>ich</STRONG>/<STRONG>ich1</STRONG>  as appropriate (but not both).  If you have to write an entry
+       most <B>ich</B> sequences do not require previous smir, and most  smir  insert
+       modes  do  not  require <B>ich1</B> before each character.  Therefore, the new
+       <B>curses</B> actually assumes this is the case and uses either  <B>rmir</B>/<B>smir</B>  or
+       <B>ich</B>/<B>ich1</B>  as appropriate (but not both).  If you have to write an entry
        to be used under new curses for a terminal old  enough  to  need  both,
-       include the <STRONG>rmir</STRONG>/<STRONG>smir</STRONG> sequences in <STRONG>ich1</STRONG>.
+       include the <B>rmir</B>/<B>smir</B> sequences in <B>ich1</B>.
 
        If post insert padding is needed, give this as a number of milliseconds
-       in <STRONG>ip</STRONG> (a string option).  Any other sequence which may need to be  sent
-       after an insert of a single character may also be given in <STRONG>ip</STRONG>.  If your
+       in <B>ip</B> (a string option).  Any other sequence which may need to be  sent
+       after an insert of a single character may also be given in <B>ip</B>.  If your
        terminal needs both to be placed into an "insert mode"  and  a  special
-       code  to  precede each inserted character, then both <STRONG>smir</STRONG>/<STRONG>rmir</STRONG> and <STRONG>ich1</STRONG>
-       can be given, and both will be used.   The  <STRONG>ich</STRONG>  capability,  with  one
-       parameter, <EM>n</EM>, will repeat the effects of <STRONG>ich1</STRONG> <EM>n</EM> times.
+       code  to  precede each inserted character, then both <B>smir</B>/<B>rmir</B> and <B>ich1</B>
+       can be given, and both will be used.   The  <B>ich</B>  capability,  with  one
+       parameter, <I>n</I>, will repeat the effects of <B>ich1</B> <I>n</I> times.
 
        If  padding  is  necessary between characters typed while not in insert
-       mode, give this as a number of milliseconds padding in <STRONG>rmp</STRONG>.
+       mode, give this as a number of milliseconds padding in <B>rmp</B>.
 
        It is occasionally necessary to move around while  in  insert  mode  to
        delete  characters  on the same line (e.g., if there is a tab after the
        insertion position).  If your terminal allows motion  while  in  insert
-       mode  you  can  give  the  capability <STRONG>mir</STRONG> to speed up inserting in this
-       case.  Omitting <STRONG>mir</STRONG> will affect only speed.   Some  terminals  (notably
-       Datamedia's)  must  not  have  <STRONG>mir</STRONG> because of the way their insert mode
+       mode  you  can  give  the  capability <B>mir</B> to speed up inserting in this
+       case.  Omitting <B>mir</B> will affect only speed.   Some  terminals  (notably
+       Datamedia's)  must  not  have  <B>mir</B> because of the way their insert mode
        works.
 
-       Finally, you can specify <STRONG>dch1</STRONG> to delete a single  character,  <STRONG>dch</STRONG>  with
-       one  parameter,  <EM>n</EM>,  to  delete <EM>n</EM> <EM>characters,</EM> and delete mode by giving
-       <STRONG>smdc</STRONG> and <STRONG>rmdc</STRONG> to enter and exit delete  mode  (any  mode  the  terminal
-       needs to be placed in for <STRONG>dch1</STRONG> to work).
+       Finally, you can specify <B>dch1</B> to delete a single  character,  <B>dch</B>  with
+       one  parameter,  <I>n</I>,  to  delete <I>n</I> <I>characters,</I> and delete mode by giving
+       <B>smdc</B> and <B>rmdc</B> to enter and exit delete  mode  (any  mode  the  terminal
+       needs to be placed in for <B>dch1</B> to work).
 
-       A  command  to  erase  <EM>n</EM>  characters (equivalent to outputting <EM>n</EM> blanks
-       without moving the cursor) can be given as <STRONG>ech</STRONG> with one parameter.
+       A  command  to  erase  <I>n</I>  characters (equivalent to outputting <I>n</I> blanks
+       without moving the cursor) can be given as <B>ech</B> with one parameter.
 
 
 </PRE><H3><a name="h3-Highlighting_-Underlining_-and-Visible-Bells">Highlighting, Underlining, and Visible Bells</a></H3><PRE>
        If your terminal has one or more kinds of display attributes, these can
        be  represented  in  a number of different ways.  You should choose one
-       display form as <EM>standout</EM> <EM>mode</EM>,  representing  a  good,  high  contrast,
+       display form as <I>standout</I> <I>mode</I>,  representing  a  good,  high  contrast,
        easy-on-the-eyes,  format  for  highlighting  error  messages and other
        attention getters.  (If you have a choice,  reverse  video  plus  half-
        bright  is  good,  or reverse video alone.)  The sequences to enter and
-       exit standout mode are given as <STRONG>smso</STRONG> and <STRONG>rmso</STRONG>,  respectively.   If  the
+       exit standout mode are given as <B>smso</B> and <B>rmso</B>,  respectively.   If  the
        code  to  change  into  or  out of standout mode leaves one or even two
        blank spaces on the screen, as the TVI 912 and Teleray  1061  do,  then
-       <STRONG>xmc</STRONG> should be given to tell how many spaces are left.
+       <B>xmc</B> should be given to tell how many spaces are left.
 
-       Codes to begin underlining and end underlining can be given as <STRONG>smul</STRONG> and
-       <STRONG>rmul</STRONG> respectively.  If the terminal has a code to underline the current
+       Codes to begin underlining and end underlining can be given as <B>smul</B> and
+       <B>rmul</B> respectively.  If the terminal has a code to underline the current
        character  and  move  the  cursor  one  space to the right, such as the
-       Microterm Mime, this can be given as <STRONG>uc</STRONG>.
+       Microterm Mime, this can be given as <B>uc</B>.
 
-       Other capabilities to enter various highlighting  modes  include  <STRONG>blink</STRONG>
-       (blinking)  <STRONG>bold</STRONG>  (bold or extra bright) <STRONG>dim</STRONG> (dim or half-bright) <STRONG>invis</STRONG>
-       (blanking or invisible text) <STRONG>prot</STRONG> (protected) <STRONG>rev</STRONG> (reverse video)  <STRONG>sgr0</STRONG>
-       (turn  off  <EM>all</EM>  attribute  modes) <STRONG>smacs</STRONG> (enter alternate character set
-       mode) and <STRONG>rmacs</STRONG> (exit alternate character set mode).  Turning on any of
+       Other capabilities to enter various highlighting  modes  include  <B>blink</B>
+       (blinking)  <B>bold</B>  (bold or extra bright) <B>dim</B> (dim or half-bright) <B>invis</B>
+       (blanking or invisible text) <B>prot</B> (protected) <B>rev</B> (reverse video)  <B>sgr0</B>
+       (turn  off  <I>all</I>  attribute  modes) <B>smacs</B> (enter alternate character set
+       mode) and <B>rmacs</B> (exit alternate character set mode).  Turning on any of
        these modes singly may or may not turn off other modes.
 
        If  there  is  a  sequence to set arbitrary combinations of modes, this
-       should be given as <STRONG>sgr</STRONG> (set attributes),  taking  9  parameters.   Each
+       should be given as <B>sgr</B> (set attributes),  taking  9  parameters.   Each
        parameter  is either 0 or nonzero, as the corresponding attribute is on
        or off.  The 9 parameters are, in order: standout, underline,  reverse,
        blink,  dim,  bold,  blank,  protect, alternate character set.  Not all
-       modes need be supported by <STRONG>sgr</STRONG>, only those for which corresponding sep-
-       arate attribute commands exist.
+       modes need be supported by <B>sgr</B>,  only  those  for  which  corresponding
+       separate attribute commands exist.
 
        For example, the DEC vt220 supports most of the modes:
 
-               <STRONG>tparm</STRONG> <STRONG>parameter</STRONG>      <STRONG>attribute</STRONG>        <STRONG>escape</STRONG> <STRONG>sequence</STRONG>
+               <B>tparm</B> <B>parameter</B>      <B>attribute</B>        <B>escape</B> <B>sequence</B>
 
                none                 none             \E[0m
                p1                   standout         \E[0;1;7m
@@ -1724,20 +1773,20 @@
 
        We  begin each escape sequence by turning off any existing modes, since
        there is no quick way to determine whether they are  active.   Standout
-       is  set up to be the combination of reverse and bold.  The vt220 termi-
-       nal has a protect mode, though it is not commonly used in  sgr  because
-       it  protects  characters  on  the screen from the host's erasures.  The
-       altcharset mode also is different in  that  it  is  either  ^O  or  ^N,
+       is  set  up  to  be  the  combination  of  reverse and bold.  The vt220
+       terminal has a protect mode, though it is  not  commonly  used  in  sgr
+       because  it protects characters on the screen from the host's erasures.
+       The altcharset mode also is different in that it is either  ^O  or  ^N,
        depending  on whether it is off or on.  If all modes are turned on, the
        resulting sequence is \E[0;1;4;5;7;8m^N.
 
-       Some sequences are common to different modes.  For example, ;7 is  out-
-       put  when  either  p1  or  p3  is  true, that is, if either standout or
+       Some sequences are common to  different  modes.   For  example,  ;7  is
+       output  when  either  p1  or p3 is true, that is, if either standout or
        reverse modes are turned on.
 
        Writing out the above sequences, along with their dependencies yields
 
-            <STRONG>sequence</STRONG>             <STRONG>when</STRONG> <STRONG>to</STRONG> <STRONG>output</STRONG>      <STRONG>terminfo</STRONG> <STRONG>translation</STRONG>
+            <B>sequence</B>             <B>when</B> <B>to</B> <B>output</B>      <B>terminfo</B> <B>translation</B>
 
             \E[0                 always              \E[0
             ;1                   if p1 or p6         %?%p1%p6%|%t;1%;
@@ -1754,38 +1803,38 @@
                %?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
 
        Remember that if you specify sgr, you must also  specify  sgr0.   Also,
-       some  implementations  rely on sgr being given if sgr0 is, Not all ter-
-       minfo entries necessarily have an sgr string, however.   Many  terminfo
-       entries are derived from termcap entries which have no sgr string.  The
-       only drawback to adding an sgr string is that termcap also assumes that
-       sgr0 does not exit alternate character set mode.
-
-       Terminals  with  the "magic cookie" glitch (<STRONG>xmc</STRONG>) deposit special "cook-
-       ies" when they receive mode-setting sequences, which affect the display
-       algorithm  rather than having extra bits for each character.  Some ter-
-       minals, such as the HP 2621, automatically  leave  standout  mode  when
-       they  move  to  a  new line or the cursor is addressed.  Programs using
-       standout mode should exit standout mode before  moving  the  cursor  or
-       sending  a  newline,  unless  the <STRONG>msgr</STRONG> capability, asserting that it is
+       some  implementations  rely  on  sgr  being  given  if sgr0 is, Not all
+       terminfo  entries  necessarily  have  an  sgr  string,  however.   Many
+       terminfo  entries  are  derived  from termcap entries which have no sgr
+       string.  The only drawback to adding an sgr string is that termcap also
+       assumes that sgr0 does not exit alternate character set mode.
+
+       Terminals   with  the  "magic  cookie"  glitch  (<B>xmc</B>)  deposit  special
+       "cookies" when they receive mode-setting sequences,  which  affect  the
+       display  algorithm  rather  than  having extra bits for each character.
+       Some terminals, such as the HP 2621, automatically leave standout  mode
+       when  they  move  to  a  new line or the cursor is addressed.  Programs
+       using standout mode should exit standout mode before moving the  cursor
+       or  sending a newline, unless the <B>msgr</B> capability, asserting that it is
        safe to move in standout mode, is present.
 
        If the terminal has a way of flashing the screen to indicate  an  error
-       quietly  (a  bell replacement) then this can be given as <STRONG>flash</STRONG>; it must
+       quietly  (a  bell replacement) then this can be given as <B>flash</B>; it must
        not move the cursor.
 
        If the cursor needs to be made more visible than normal when it is  not
        on the bottom line (to make, for example, a non-blinking underline into
        an easier to find block or blinking underline) give  this  sequence  as
-       <STRONG>cvvis</STRONG>.  If there is a way to make the cursor completely invisible, give
-       that as <STRONG>civis</STRONG>.  The capability <STRONG>cnorm</STRONG> should be given which  undoes  the
+       <B>cvvis</B>.  If there is a way to make the cursor completely invisible, give
+       that as <B>civis</B>.  The capability <B>cnorm</B> should be given which  undoes  the
        effects of both of these modes.
 
        If  your  terminal  correctly  generates underlined characters (with no
        special codes needed) even though it  does  not  overstrike,  then  you
-       should  give  the  capability  <STRONG>ul</STRONG>.  If a character overstriking another
-       leaves both characters on the screen, specify the  capability  <STRONG>os</STRONG>.   If
+       should  give  the  capability  <B>ul</B>.  If a character overstriking another
+       leaves both characters on the screen, specify the  capability  <B>os</B>.   If
        overstrikes are erasable with a blank, then this should be indicated by
-       giving <STRONG>eo</STRONG>.
+       giving <B>eo</B>.
 
 
 </PRE><H3><a name="h3-Keypad-and-Function-Keys">Keypad and Function Keys</a></H3><PRE>
@@ -1793,206 +1842,245 @@
        pressed,  this  information can be given.  Note that it is not possible
        to handle terminals where the keypad only works in local (this applies,
        for  example, to the unshifted HP 2621 keys).  If the keypad can be set
-       to transmit or not transmit, give these codes as <STRONG>smkx</STRONG> and <STRONG>rmkx</STRONG>.  Other-
-       wise the keypad is assumed to always transmit.
+       to transmit or not  transmit,  give  these  codes  as  <B>smkx</B>  and  <B>rmkx</B>.
+       Otherwise the keypad is assumed to always transmit.
 
        The  codes  sent  by the left arrow, right arrow, up arrow, down arrow,
-       and home keys can be given as <STRONG>kcub1,</STRONG> <STRONG>kcuf1,</STRONG>  <STRONG>kcuu1,</STRONG>  <STRONG>kcud1,</STRONG>  and  <STRONG>khome</STRONG>
+       and home keys can be given as <B>kcub1,</B> <B>kcuf1,</B>  <B>kcuu1,</B>  <B>kcud1,</B>  and  <B>khome</B>
        respectively.  If there are function keys such as f0, f1, ..., f10, the
-       codes they send can be given as <STRONG>kf0,</STRONG> <STRONG>kf1,</STRONG> <STRONG>...,</STRONG>  <STRONG>kf10</STRONG>.   If  these  keys
+       codes they send can be given as <B>kf0,</B> <B>kf1,</B> <B>...,</B>  <B>kf10</B>.   If  these  keys
        have  labels  other  than the default f0 through f10, the labels can be
-       given as <STRONG>lf0,</STRONG> <STRONG>lf1,</STRONG> <STRONG>...,</STRONG> <STRONG>lf10</STRONG>.
+       given as <B>lf0,</B> <B>lf1,</B> <B>...,</B> <B>lf10</B>.
 
        The codes transmitted by certain other special keys can be given:
 
-       <STRONG>o</STRONG>   <STRONG>kll</STRONG> (home down),
+       <B>o</B>   <B>kll</B> (home down),
 
-       <STRONG>o</STRONG>   <STRONG>kbs</STRONG> (backspace),
+       <B>o</B>   <B>kbs</B> (backspace),
 
-       <STRONG>o</STRONG>   <STRONG>ktbc</STRONG> (clear all tabs),
+       <B>o</B>   <B>ktbc</B> (clear all tabs),
 
-       <STRONG>o</STRONG>   <STRONG>kctab</STRONG> (clear the tab stop in this column),
+       <B>o</B>   <B>kctab</B> (clear the tab stop in this column),
 
-       <STRONG>o</STRONG>   <STRONG>kclr</STRONG> (clear screen or erase key),
+       <B>o</B>   <B>kclr</B> (clear screen or erase key),
 
-       <STRONG>o</STRONG>   <STRONG>kdch1</STRONG> (delete character),
+       <B>o</B>   <B>kdch1</B> (delete character),
 
-       <STRONG>o</STRONG>   <STRONG>kdl1</STRONG> (delete line),
+       <B>o</B>   <B>kdl1</B> (delete line),
 
-       <STRONG>o</STRONG>   <STRONG>krmir</STRONG> (exit insert mode),
+       <B>o</B>   <B>krmir</B> (exit insert mode),
 
-       <STRONG>o</STRONG>   <STRONG>kel</STRONG> (clear to end of line),
+       <B>o</B>   <B>kel</B> (clear to end of line),
 
-       <STRONG>o</STRONG>   <STRONG>ked</STRONG> (clear to end of screen),
+       <B>o</B>   <B>ked</B> (clear to end of screen),
 
-       <STRONG>o</STRONG>   <STRONG>kich1</STRONG> (insert character or enter insert mode),
+       <B>o</B>   <B>kich1</B> (insert character or enter insert mode),
 
-       <STRONG>o</STRONG>   <STRONG>kil1</STRONG> (insert line),
+       <B>o</B>   <B>kil1</B> (insert line),
 
-       <STRONG>o</STRONG>   <STRONG>knp</STRONG> (next page),
+       <B>o</B>   <B>knp</B> (next page),
 
-       <STRONG>o</STRONG>   <STRONG>kpp</STRONG> (previous page),
+       <B>o</B>   <B>kpp</B> (previous page),
 
-       <STRONG>o</STRONG>   <STRONG>kind</STRONG> (scroll forward/down),
+       <B>o</B>   <B>kind</B> (scroll forward/down),
 
-       <STRONG>o</STRONG>   <STRONG>kri</STRONG> (scroll backward/up),
+       <B>o</B>   <B>kri</B> (scroll backward/up),
 
-       <STRONG>o</STRONG>   <STRONG>khts</STRONG> (set a tab stop in this column).
+       <B>o</B>   <B>khts</B> (set a tab stop in this column).
 
        In addition, if the keypad has a 3 by 3 array  of  keys  including  the
-       four  arrow  keys,  the  other five keys can be given as <STRONG>ka1</STRONG>, <STRONG>ka3</STRONG>, <STRONG>kb2</STRONG>,
-       <STRONG>kc1</STRONG>, and <STRONG>kc3</STRONG>.  These keys are useful when the  effects  of  a  3  by  3
+       four  arrow  keys,  the  other five keys can be given as <B>ka1</B>, <B>ka3</B>, <B>kb2</B>,
+       <B>kc1</B>, and <B>kc3</B>.  These keys are useful when the  effects  of  a  3  by  3
        directional pad are needed.
 
-       Strings to program function keys can be given as <STRONG>pfkey</STRONG>, <STRONG>pfloc</STRONG>, and <STRONG>pfx</STRONG>.
-       A string to program screen labels should be specified as <STRONG>pln</STRONG>.  Each  of
+       Strings to program function keys can be given as <B>pfkey</B>, <B>pfloc</B>, and <B>pfx</B>.
+       A string to program screen labels should be specified as <B>pln</B>.  Each  of
        these  strings takes two parameters: the function key number to program
        (from 0 to 10) and the string to program it with.  Function key numbers
        out  of  this  range may program undefined keys in a terminal dependent
-       manner.  The difference between the capabilities is that  <STRONG>pfkey</STRONG>  causes
+       manner.  The difference between the capabilities is that  <B>pfkey</B>  causes
        pressing  the  given  key  to  be the same as the user typing the given
-       string; <STRONG>pfloc</STRONG> causes the string to  be  executed  by  the  terminal  in
-       local; and <STRONG>pfx</STRONG> causes the string to be transmitted to the computer.
+       string; <B>pfloc</B> causes the string to  be  executed  by  the  terminal  in
+       local; and <B>pfx</B> causes the string to be transmitted to the computer.
 
-       The  capabilities  <STRONG>nlab</STRONG>,  <STRONG>lw</STRONG>  and  <STRONG>lh</STRONG> define the number of programmable
+       The  capabilities  <B>nlab</B>,  <B>lw</B>  and  <B>lh</B> define the number of programmable
        screen labels and their width and height.  If  there  are  commands  to
-       turn  the  labels on and off, give them in <STRONG>smln</STRONG> and <STRONG>rmln</STRONG>.  <STRONG>smln</STRONG> is nor-
-       mally output after one or more pln sequences  to  make  sure  that  the
+       turn  the  labels  on  and  off,  give  them in <B>smln</B> and <B>rmln</B>.  <B>smln</B> is
+       normally output after one or more pln sequences to make sure  that  the
        change becomes visible.
 
 
 </PRE><H3><a name="h3-Tabs-and-Initialization">Tabs and Initialization</a></H3><PRE>
-       If  the  terminal has hardware tabs, the command to advance to the next
-       tab stop can be given as <STRONG>ht</STRONG> (usually control I).  A "back-tab"  command
-       which moves leftward to the preceding tab stop can be given as <STRONG>cbt</STRONG>.  By
-       convention, if the teletype modes indicate that tabs are being expanded
-       by the computer rather than being sent to the terminal, programs should
-       not use <STRONG>ht</STRONG> or <STRONG>cbt</STRONG> even if they are present, since the user may not have
-       the  tab  stops  properly set.  If the terminal has hardware tabs which
-       are initially set every <EM>n</EM> spaces when the terminal is powered  up,  the
-       numeric  parameter  <STRONG>it</STRONG>  is given, showing the number of spaces the tabs
-       are set to.  This is normally used by the  <STRONG>tset</STRONG>  command  to  determine
-       whether  to set the mode for hardware tab expansion, and whether to set
-       the tab stops.  If the terminal has tab stops that can be saved in non-
-       volatile  memory,  the  terminfo  description  can assume that they are
-       properly set.
-
-       Other capabilities include <STRONG>is1</STRONG>, <STRONG>is2</STRONG>, and  <STRONG>is3</STRONG>,  initialization  strings
-       for  the  terminal, <STRONG>iprog</STRONG>, the path name of a program to be run to ini-
-       tialize the terminal, and <STRONG>if</STRONG>, the name of a file containing  long  ini-
-       tialization  strings.   These  strings are expected to set the terminal
-       into modes consistent with the rest of the terminfo description.   They
-       are  normally sent to the terminal, by the <EM>init</EM> option of the <STRONG>tput</STRONG> pro-
-       gram, each time the user logs in.  They will be printed in the  follow-
-       ing order:
+       A few capabilities are used only for tabs:
+
+       <B>o</B>   If  the  terminal  has hardware tabs, the command to advance to the
+           next tab stop can be given as <B>ht</B> (usually control/I).
+
+       <B>o</B>   A "back-tab" command which moves leftward to the preceding tab stop
+           can be given as <B>cbt</B>.
+
+           By  convention,  if the teletype modes indicate that tabs are being
+           expanded by the computer rather than being sent  to  the  terminal,
+           programs  should  not use <B>ht</B> or <B>cbt</B> even if they are present, since
+           the user may not have the tab stops properly set.
+
+       <B>o</B>   If the terminal has hardware tabs which are initially set  every  <I>n</I>
+           spaces when the terminal is powered up, the numeric parameter <B>it</B> is
+           given, showing the number of spaces the tabs are set to.
+
+           The <B>it</B> capability is normally used by the <B>tset</B> command to determine
+           whether  to set the mode for hardware tab expansion, and whether to
+           set the tab stops.  If the terminal has tab stops that can be saved
+           in  non-volatile  memory,  the terminfo description can assume that
+           they are properly set.
+
+       Other capabilities include
+
+       <B>o</B>   <B>is1</B>, <B>is2</B>, and <B>is3</B>, initialization strings for the terminal,
+
+       <B>o</B>   <B>iprog</B>, the path name of a program  to  be  run  to  initialize  the
+           terminal,
+
+       <B>o</B>   and <B>if</B>, the name of a file containing long initialization strings.
+
+       These  strings  are  expected to set the terminal into modes consistent
+       with the rest of the terminfo description.  They are normally  sent  to
+       the  terminal,  by  the  <I>init</I> option of the <B>tput</B> program, each time the
+       user logs in.  They will be printed in the following order:
 
               run the program
-                     <STRONG>iprog</STRONG>
+                     <B>iprog</B>
 
-              output <STRONG>is1</STRONG> <STRONG>is2</STRONG>
+              output
+                     <B>is1</B> and
+                     <B>is2</B>
 
               set the margins using
-                     <STRONG>mgc</STRONG>, <STRONG>smgl</STRONG> and <STRONG>smgr</STRONG>
+                     <B>mgc</B> or
+                     <B>smglp</B> and <B>smgrp</B> or
+                     <B>smgl</B> and <B>smgr</B>
 
               set tabs using
-                     <STRONG>tbc</STRONG> and <STRONG>hts</STRONG>
+                     <B>tbc</B> and <B>hts</B>
 
               print the file
-                     <STRONG>if</STRONG>
-
-              and finally
-                     output <STRONG>is3</STRONG>.
-
-       Most  initialization  is  done with <STRONG>is2</STRONG>.  Special terminal modes can be
-       set up without duplicating strings by putting the common  sequences  in
-       <STRONG>is2</STRONG> and special cases in <STRONG>is1</STRONG> and <STRONG>is3</STRONG>.
-
-       A  set  of  sequences  that  does a harder reset from a totally unknown
-       state can be given as <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rf</STRONG> and <STRONG>rs3</STRONG>, analogous to <STRONG>is1</STRONG> <STRONG>,</STRONG> <STRONG>is2</STRONG> <STRONG>,</STRONG> <STRONG>if</STRONG>
-       and  <STRONG>is3</STRONG>  respectively.  These strings are output by the <STRONG>reset</STRONG> program,
-       which is used when the terminal gets into a wedged state.  Commands are
-       normally  placed  in  <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG> <STRONG>rs3</STRONG> and <STRONG>rf</STRONG> only if they produce annoying
-       effects on the screen and are not necessary when logging in.  For exam-
-       ple, the command to set the vt100 into 80-column mode would normally be
-       part of <STRONG>is2</STRONG>, but it causes an annoying glitch of the screen and is  not
-       normally  needed  since  the  terminal  is usually already in 80 column
-       mode.
-
-       The <STRONG>reset</STRONG> program writes strings including <STRONG>iprog</STRONG>,  etc.,  in  the  same
-       order  as  the  <EM>init</EM> program, using <STRONG>rs1</STRONG>, etc., instead of <STRONG>is1</STRONG>, etc.  If
-       any of <STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rs3</STRONG>, or <STRONG>rf</STRONG> reset capability strings are  missing,  the
-       <STRONG>reset</STRONG> program falls back upon the corresponding initialization capabil-
-       ity string.
-
-       If there are commands to set and clear tab stops, they can be given  as
-       <STRONG>tbc</STRONG> (clear all tab stops) and <STRONG>hts</STRONG> (set a tab stop in the current column
-       of every row).  If a more complex sequence is needed to  set  the  tabs
-       than can be described by this, the sequence can be placed in <STRONG>is2</STRONG> or <STRONG>if</STRONG>.
+                     <B>if</B>
+
+              and finally output
+                     <B>is3</B>.
+
+       Most initialization is done with <B>is2</B>.  Special terminal  modes  can  be
+       set  up  without duplicating strings by putting the common sequences in
+       <B>is2</B> and special cases in <B>is1</B> and <B>is3</B>.
+
+       A set of sequences that does a harder  reset  from  a  totally  unknown
+       state can be given as <B>rs1</B>, <B>rs2</B>, <B>rf</B> and <B>rs3</B>, analogous to <B>is1</B> <B>,</B> <B>is2</B> <B>,</B> <B>if</B>
+       and <B>is3</B> respectively.  These strings are  output  by  <I>reset</I>  option  of
+       <B>tput</B>,  or  by  the <B>reset</B> program (an alias of <B>tset</B>), which is used when
+       the terminal gets into a wedged state.  Commands are normally placed in
+       <B>rs1</B>, <B>rs2</B> <B>rs3</B> and <B>rf</B> only if they produce annoying effects on the screen
+       and are not necessary when logging in.  For example, the command to set
+       the  vt100  into  80-column  mode would normally be part of <B>is2</B>, but it
+       causes an annoying glitch of the screen  and  is  not  normally  needed
+       since the terminal is usually already in 80-column mode.
+
+       The  <B>reset</B>  program  writes  strings including <B>iprog</B>, etc., in the same
+       order as the <I>init</I> program, using <B>rs1</B>, etc., instead of  <B>is1</B>,  etc.   If
+       any  of  <B>rs1</B>, <B>rs2</B>, <B>rs3</B>, or <B>rf</B> reset capability strings are missing, the
+       <B>reset</B>  program  falls  back  upon  the   corresponding   initialization
+       capability string.
+
+       If  there are commands to set and clear tab stops, they can be given as
+       <B>tbc</B> (clear all tab stops) and <B>hts</B> (set a tab stop in the current column
+       of  every  row).   If a more complex sequence is needed to set the tabs
+       than can be described by this, the sequence can be placed in <B>is2</B> or <B>if</B>.
+
+       The <B>tput</B> <B>reset</B> command uses the same capability strings  as  the  <B>reset</B>
+       command,  although  the two programs (<B>tput</B> and <B>reset</B>) provide different
+       command-line options.
+
+       In  practice,  these  terminfo  capabilities  are  not  often  used  in
+       initialization of tabs (though they are required for the <B>tabs</B> program):
+
+       <B>o</B>   Almost all hardware terminals (at least those which supported tabs)
+           initialized those to every <I>eight</I> columns:
+
+           The only exception was the AT&amp;T 2300  series,  which  set  tabs  to
+           every <I>five</I> columns.
+
+       <B>o</B>   In  particular,  developers  of  the  hardware  terminals which are
+           commonly used as models  for  modern  terminal  emulators  provided
+           documentation demonstrating that <I>eight</I> columns were the standard.
+
+       <B>o</B>   Because of this, the terminal initialization programs <B>tput</B> and <B>tset</B>
+           use  the  <B>tbc</B>  (<B>clear_all_tabs</B>)  and  <B>hts</B>  (<B>set_tab</B>)   capabilities
+           directly  only when the <B>it</B> (<B>init_tabs</B>) capability is set to a value
+           other than <I>eight</I>.
 
 
 </PRE><H3><a name="h3-Delays-and-Padding">Delays and Padding</a></H3><PRE>
-       Many  older  and slower terminals do not support either XON/XOFF or DTR
-       handshaking, including hard copy terminals and some very  archaic  CRTs
-       (including,  for example, DEC VT100s).  These may require padding char-
-       acters after certain cursor motions and screen changes.
+       Many older and slower terminals do not support either XON/XOFF  or  DTR
+       handshaking,  including  hard copy terminals and some very archaic CRTs
+       (including, for  example,  DEC  VT100s).   These  may  require  padding
+       characters after certain cursor motions and screen changes.
 
        If the terminal uses xon/xoff handshaking for flow control (that is, it
-       automatically  emits  ^S  back  to  the host when its input buffers are
-       close to full), set <STRONG>xon</STRONG>.  This capability suppresses  the  emission  of
-       padding.   You can also set it for memory-mapped console devices effec-
-       tively that do not have a  speed  limit.   Padding  information  should
-       still be included so that routines can make better decisions about rel-
-       ative costs, but actual pad characters will not be transmitted.
-
-       If <STRONG>pb</STRONG> (padding baud rate) is given, padding is suppressed at baud rates
-       below  the  value  of  <STRONG>pb</STRONG>.  If the entry has no padding baud rate, then
-       whether padding is emitted or not is completely controlled by <STRONG>xon</STRONG>.
-
-       If the terminal requires other than a null (zero) character as  a  pad,
-       then  this  can  be  given as <STRONG>pad</STRONG>.  Only the first character of the <STRONG>pad</STRONG>
+       automatically emits ^S back to the host  when  its  input  buffers  are
+       close  to  full),  set <B>xon</B>.  This capability suppresses the emission of
+       padding.  You  can  also  set  it  for  memory-mapped  console  devices
+       effectively that do not have a speed limit.  Padding information should
+       still be included so that routines  can  make  better  decisions  about
+       relative costs, but actual pad characters will not be transmitted.
+
+       If <B>pb</B> (padding baud rate) is given, padding is suppressed at baud rates
+       below the value of <B>pb</B>.  If the entry has no  padding  baud  rate,  then
+       whether padding is emitted or not is completely controlled by <B>xon</B>.
+
+       If  the  terminal requires other than a null (zero) character as a pad,
+       then this can be given as <B>pad</B>.  Only the first  character  of  the  <B>pad</B>
        string is used.
 
 
 </PRE><H3><a name="h3-Status-Lines">Status Lines</a></H3><PRE>
-       Some terminals have an extra "status line" which is not  normally  used
-       by software (and thus not counted in the terminal's <STRONG>lines</STRONG> capability).
+       Some  terminals  have an extra "status line" which is not normally used
+       by software (and thus not counted in the terminal's <B>lines</B> capability).
 
-       The  simplest case is a status line which is cursor-addressable but not
+       The simplest case is a status line which is cursor-addressable but  not
        part of the main scrolling region on the screen; the Heathkit H19 has a
-       status  line  of  this  kind,  as  would a 24-line VT100 with a 23-line
+       status line of this kind, as would  a  24-line  VT100  with  a  23-line
        scrolling region set up on initialization.  This situation is indicated
-       by the <STRONG>hs</STRONG> capability.
+       by the <B>hs</B> capability.
 
-       Some  terminals  with status lines need special sequences to access the
-       status line.  These may be expressed as a string with single  parameter
-       <STRONG>tsl</STRONG>  which takes the cursor to a given zero-origin column on the status
-       line.  The capability <STRONG>fsl</STRONG> must return to the main-screen  cursor  posi-
-       tions  before the last <STRONG>tsl</STRONG>.  You may need to embed the string values of
-       <STRONG>sc</STRONG> (save cursor) and <STRONG>rc</STRONG> (restore cursor) in <STRONG>tsl</STRONG> and <STRONG>fsl</STRONG>  to  accomplish
-       this.
+       Some terminals with status lines need special sequences to  access  the
+       status  line.  These may be expressed as a string with single parameter
+       <B>tsl</B> which takes the cursor to a given zero-origin column on the  status
+       line.   The  capability  <B>fsl</B>  must  return  to  the  main-screen cursor
+       positions before the last <B>tsl</B>.  You may need to embed the string values
+       of  <B>sc</B>  (save  cursor)  and  <B>rc</B>  (restore  cursor)  in  <B>tsl</B>  and <B>fsl</B> to
+       accomplish this.
 
-       The  status  line is normally assumed to be the same width as the width
-       of the terminal.  If this is  untrue,  you  can  specify  it  with  the
-       numeric capability <STRONG>wsl</STRONG>.
+       The status line is normally assumed to be the same width as  the  width
+       of  the  terminal.   If  this  is  untrue,  you can specify it with the
+       numeric capability <B>wsl</B>.
 
-       A command to erase or blank the status line may be specified as <STRONG>dsl</STRONG>.
+       A command to erase or blank the status line may be specified as <B>dsl</B>.
 
-       The  boolean  capability  <STRONG>eslok</STRONG>  specifies that escape sequences, tabs,
+       The boolean capability <B>eslok</B> specifies  that  escape  sequences,  tabs,
        etc., work ordinarily in the status line.
 
-       The <STRONG>ncurses</STRONG> implementation does not yet use any of these  capabilities.
+       The  <B>ncurses</B> implementation does not yet use any of these capabilities.
        They are documented here in case they ever become important.
 
 
 </PRE><H3><a name="h3-Line-Graphics">Line Graphics</a></H3><PRE>
-       Many  terminals have alternate character sets useful for forms-drawing.
-       Terminfo and <STRONG>curses</STRONG> have built-in support for most of the drawing char-
-       acters  supported  by  the  VT100,  with  some characters from the AT&amp;T
-       4410v1 added.  This alternate character set may  be  specified  by  the
-       <STRONG>acsc</STRONG> capability.
-
-         <STRONG>Glyph</STRONG>                       <STRONG>ACS</STRONG>            <STRONG>Ascii</STRONG>     <STRONG>acsc</STRONG>     <STRONG>acsc</STRONG>
-         <STRONG>Name</STRONG>                        <STRONG>Name</STRONG>           <STRONG>Default</STRONG>   <STRONG>Char</STRONG>     <STRONG>Value</STRONG>
+       Many terminals have alternate character sets useful for  forms-drawing.
+       Terminfo  and  <B>curses</B>  have  built-in  support  for most of the drawing
+       characters supported by the VT100, with some characters from  the  AT&amp;T
+       4410v1  added.   This  alternate  character set may be specified by the
+       <B>acsc</B> capability.
+
+         <B>Glyph</B>                       <B>ACS</B>            <B>Ascii</B>     <B>acsc</B>     <B>acsc</B>
+         <B>Name</B>                        <B>Name</B>           <B>Default</B>   <B>Char</B>     <B>Value</B>
          --------------------------------------------------------------------
          arrow pointing right        ACS_RARROW     &gt;         +        0x2b
          arrow pointing left         ACS_LARROW     &lt;         ,        0x2c
@@ -2004,9 +2092,9 @@
          degree symbol               ACS_DEGREE     \         f        0x66
          plus/minus                  ACS_PLMINUS    #         g        0x67
          board of squares            ACS_BOARD      #         h        0x68
-
          lantern symbol              ACS_LANTERN    #         i        0x69
          lower right corner          ACS_LRCORNER   +         j        0x6a
+
          upper right corner          ACS_URCORNER   +         k        0x6b
          upper left corner           ACS_ULCORNER   +         l        0x6c
          lower left corner           ACS_LLCORNER   +         m        0x6d
@@ -2030,133 +2118,135 @@
 
        A few notes apply to the table itself:
 
-       <STRONG>o</STRONG>   X/Open  Curses  incorrectly  states that the mapping for <EM>lantern</EM> is
-           uppercase "I" although Unix implementations use the  lowercase  "i"
+       <B>o</B>   X/Open Curses incorrectly states that the mapping  for  <I>lantern</I>  is
+           uppercase  "I"  although Unix implementations use the lowercase "i"
            mapping.
 
-       <STRONG>o</STRONG>   The  DEC  VT100  implemented graphics using the alternate character
-           set feature, temporarily switching <EM>modes</EM> and sending characters  in
-           the range 0x60 (96) to 0x7e (126) (the <STRONG>acsc</STRONG> <STRONG>Value</STRONG> column in the ta-
-           ble).
+       <B>o</B>   The DEC VT100 implemented graphics using  the  alternate  character
+           set  feature, temporarily switching <I>modes</I> and sending characters in
+           the range 0x60 (96) to 0x7e (126) (the <B>acsc</B>  <B>Value</B>  column  in  the
+           table).
 
-       <STRONG>o</STRONG>   The AT&amp;T terminal added graphics characters outside that range.
+       <B>o</B>   The AT&amp;T terminal added graphics characters outside that range.
 
-           Some of the characters within the range do  not  match  the  VT100;
-           presumably  they  were  used in the AT&amp;T terminal: <EM>board</EM> <EM>of</EM> <EM>squares</EM>
-           replaces the VT100 <EM>newline</EM> symbol, while  <EM>lantern</EM>  <EM>symbol</EM>  replaces
-           the VT100 <EM>vertical</EM> <EM>tab</EM> symbol.  The other VT100 symbols for control
-           characters (<EM>horizontal</EM> <EM>tab</EM>, <EM>carriage</EM> <EM>return</EM> and <EM>line-feed</EM>) are  not
+           Some  of  the  characters  within the range do not match the VT100;
+           presumably they were used in the AT&amp;T terminal:  <I>board</I>  <I>of</I>  <I>squares</I>
+           replaces  the  VT100  <I>newline</I> symbol, while <I>lantern</I> <I>symbol</I> replaces
+           the VT100 <I>vertical</I> <I>tab</I> symbol.  The other VT100 symbols for control
+           characters  (<I>horizontal</I> <I>tab</I>, <I>carriage</I> <I>return</I> and <I>line-feed</I>) are not
            (re)used in curses.
 
-       The  best  way to define a new device's graphics set is to add a column
-       to a copy of this table for your terminal, giving the  character  which
-       (when  emitted  between  <STRONG>smacs</STRONG>/<STRONG>rmacs</STRONG>  switches) will be rendered as the
+       The best way to define a new device's graphics set is to add  a  column
+       to  a  copy of this table for your terminal, giving the character which
+       (when emitted between <B>smacs</B>/<B>rmacs</B> switches) will  be  rendered  as  the
        corresponding graphic.  Then read off the VT100/your terminal character
        pairs right to left in sequence; these become the ACSC string.
 
 
 </PRE><H3><a name="h3-Color-Handling">Color Handling</a></H3><PRE>
-       The  curses  library  functions <STRONG>init_pair</STRONG> and <STRONG>init_color</STRONG> manipulate the
-       <EM>color</EM>  <EM>pairs</EM>  and  <EM>color</EM>  <EM>values</EM>  discussed  in   this   section   (see
-       <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG> for details on these and related functions).
+       The curses library functions <B>init_pair</B> and  <B>init_color</B>  manipulate  the
+       <I>color</I>   <I>pairs</I>   and   <I>color</I>  <I>values</I>  discussed  in  this  section  (see
+       <B><A HREF="curs_color.3X.html">curs_color(3X)</A></B> for details on these and related functions).
 
        Most color terminals are either "Tektronix-like" or "HP-like":
 
-       <STRONG>o</STRONG>   Tektronix-like terminals have a predefined set of <EM>N</EM> colors (where <EM>N</EM>
+       <B>o</B>   Tektronix-like terminals have a predefined set of <I>N</I> colors (where <I>N</I>
            is usually 8), and can set character-cell foreground and background
-           characters independently, mixing them into <EM>N</EM> * <EM>N</EM> color-pairs.
+           characters independently, mixing them into <I>N</I> * <I>N</I> color-pairs.
 
-       <STRONG>o</STRONG>   On  HP-like  terminals,  the user must set each color pair up sepa-
-           rately (foreground and background are not independently  settable).
-           Up to <EM>M</EM> color-pairs may be set up from 2*<EM>M</EM> different colors.  ANSI-
-           compatible terminals are Tektronix-like.
+       <B>o</B>   On HP-like  terminals,  the  user  must  set  each  color  pair  up
+           separately   (foreground   and  background  are  not  independently
+           settable).  Up to <I>M</I> color-pairs may be set up  from  2*<I>M</I>  different
+           colors.  ANSI-compatible terminals are Tektronix-like.
 
        Some basic color capabilities are independent of the color method.  The
-       numeric  capabilities  <STRONG>colors</STRONG>  and <STRONG>pairs</STRONG> specify the maximum numbers of
-       colors and color-pairs that can be displayed  simultaneously.   The  <STRONG>op</STRONG>
+       numeric capabilities <B>colors</B> and <B>pairs</B> specify the  maximum  numbers  of
+       colors  and  color-pairs  that can be displayed simultaneously.  The <B>op</B>
        (original pair) string resets foreground and background colors to their
-       default values for the terminal.  The <STRONG>oc</STRONG> string resets  all  colors  or
-       color-pairs  to  their default values for the terminal.  Some terminals
-       (including many PC terminal emulators) erase screen areas with the cur-
-       rent  background  color  rather  than  the power-up default background;
-       these should have the boolean capability <STRONG>bce</STRONG>.
-
-       While the curses library works with <EM>color</EM> <EM>pairs</EM> (reflecting the inabil-
-       ity  of  some  devices to set foreground and background colors indepen-
-       dently), there are separate capabilities for setting these features:
-
-       <STRONG>o</STRONG>   To change the current foreground or  background  color  on  a  Tek-
-           tronix-type  terminal,  use  <STRONG>setaf</STRONG>  (set ANSI foreground) and <STRONG>setab</STRONG>
-           (set ANSI background) or <STRONG>setf</STRONG> (set foreground) and <STRONG>setb</STRONG> (set  back-
-           ground).   These  take  one  parameter, the color number.  The SVr4
-           documentation describes only <STRONG>setaf</STRONG>/<STRONG>setab</STRONG>; the XPG4 draft says  that
+       default  values  for  the terminal.  The <B>oc</B> string resets all colors or
+       color-pairs to their default values for the terminal.   Some  terminals
+       (including  many  PC  terminal  emulators)  erase screen areas with the
+       current background color rather than the power-up  default  background;
+       these should have the boolean capability <B>bce</B>.
+
+       While  the  curses  library  works  with  <I>color</I>  <I>pairs</I>  (reflecting the
+       inability of some devices  to  set  foreground  and  background  colors
+       independently),  there  are  separate  capabilities  for  setting these
+       features:
+
+       <B>o</B>   To  change  the  current  foreground  or  background  color  on   a
+           Tektronix-type  terminal, use <B>setaf</B> (set ANSI foreground) and <B>setab</B>
+           (set ANSI background)  or  <B>setf</B>  (set  foreground)  and  <B>setb</B>  (set
+           background).  These take one parameter, the color number.  The SVr4
+           documentation describes only <B>setaf</B>/<B>setab</B>; the XPG4 draft says  that
            "If  the  terminal supports ANSI escape sequences to set background
-           and foreground, they should be coded as <STRONG>setaf</STRONG>  and  <STRONG>setab</STRONG>,  respec-
-           tively.
-
-       <STRONG>o</STRONG>   If  the  terminal supports other escape sequences to set background
-           and foreground, they should be coded  as  <STRONG>setf</STRONG>  and  <STRONG>setb</STRONG>,  respec-
-           tively.   The  <STRONG>vidputs</STRONG>  and the <STRONG><A HREF="curs_refresh.3x.html">refresh(3x)</A></STRONG> functions use the <STRONG>setaf</STRONG>
-           and <STRONG>setab</STRONG> capabilities if they are defined.
-
-       The <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> and <STRONG>setf</STRONG>/<STRONG>setb</STRONG> capabilities take a single numeric  argu-
-       ment  each.  Argument values 0-7 of <STRONG>setaf</STRONG>/<STRONG>setab</STRONG> are portably defined as
-       follows (the middle column is the symbolic  #define  available  in  the
-       header  for the <STRONG>curses</STRONG> or <STRONG>ncurses</STRONG> libraries).  The terminal hardware is
-       free to map these as it likes, but the RGB values indicate normal loca-
-       tions in color space.
-
-                    <STRONG>Color</STRONG>       <STRONG>#define</STRONG>       <STRONG>Value</STRONG>       <STRONG>RGB</STRONG>
-                    black     <STRONG>COLOR_BLACK</STRONG>       0     0, 0, 0
-                    red       <STRONG>COLOR_RED</STRONG>         1     max,0,0
-                    green     <STRONG>COLOR_GREEN</STRONG>       2     0,max,0
-                    yellow    <STRONG>COLOR_YELLOW</STRONG>      3     max,max,0
-                    blue      <STRONG>COLOR_BLUE</STRONG>        4     0,0,max
-                    magenta   <STRONG>COLOR_MAGENTA</STRONG>     5     max,0,max
-                    cyan      <STRONG>COLOR_CYAN</STRONG>        6     0,max,max
-                    white     <STRONG>COLOR_WHITE</STRONG>       7     max,max,max
-
-       The argument values of <STRONG>setf</STRONG>/<STRONG>setb</STRONG> historically correspond to a different
+           and  foreground,  they  should  be  coded  as  <B>setaf</B>   and   <B>setab</B>,
+           respectively.
+
+       <B>o</B>   If  the  terminal supports other escape sequences to set background
+           and  foreground,  they  should  be  coded   as   <B>setf</B>   and   <B>setb</B>,
+           respectively.   The  <B>vidputs</B>  and the <B><A HREF="curs_refresh.3X.html">refresh(3X)</A></B> functions use the
+           <B>setaf</B> and <B>setab</B> capabilities if they are defined.
+
+       The <B>setaf</B>/<B>setab</B>  and  <B>setf</B>/<B>setb</B>  capabilities  take  a  single  numeric
+       argument each.  Argument values 0-7 of <B>setaf</B>/<B>setab</B> are portably defined
+       as follows (the middle column is the symbolic #define available in  the
+       header  for the <B>curses</B> or <B>ncurses</B> libraries).  The terminal hardware is
+       free to map these as it likes,  but  the  RGB  values  indicate  normal
+       locations in color space.
+
+                    <B>Color</B>       <B>#define</B>       <B>Value</B>       <B>RGB</B>
+                    black     <B>COLOR_BLACK</B>       0     0, 0, 0
+                    red       <B>COLOR_RED</B>         1     max,0,0
+                    green     <B>COLOR_GREEN</B>       2     0,max,0
+                    yellow    <B>COLOR_YELLOW</B>      3     max,max,0
+                    blue      <B>COLOR_BLUE</B>        4     0,0,max
+                    magenta   <B>COLOR_MAGENTA</B>     5     max,0,max
+                    cyan      <B>COLOR_CYAN</B>        6     0,max,max
+                    white     <B>COLOR_WHITE</B>       7     max,max,max
+
+       The argument values of <B>setf</B>/<B>setb</B> historically correspond to a different
        mapping, i.e.,
 
-                    <STRONG>Color</STRONG>       <STRONG>#define</STRONG>       <STRONG>Value</STRONG>       <STRONG>RGB</STRONG>
-                    black     <STRONG>COLOR_BLACK</STRONG>       0     0, 0, 0
-                    blue      <STRONG>COLOR_BLUE</STRONG>        1     0,0,max
-                    green     <STRONG>COLOR_GREEN</STRONG>       2     0,max,0
-                    cyan      <STRONG>COLOR_CYAN</STRONG>        3     0,max,max
-                    red       <STRONG>COLOR_RED</STRONG>         4     max,0,0
-                    magenta   <STRONG>COLOR_MAGENTA</STRONG>     5     max,0,max
-                    yellow    <STRONG>COLOR_YELLOW</STRONG>      6     max,max,0
-                    white     <STRONG>COLOR_WHITE</STRONG>       7     max,max,max
+                    <B>Color</B>       <B>#define</B>       <B>Value</B>       <B>RGB</B>
+                    black     <B>COLOR_BLACK</B>       0     0, 0, 0
+                    blue      <B>COLOR_BLUE</B>        1     0,0,max
+                    green     <B>COLOR_GREEN</B>       2     0,max,0
+                    cyan      <B>COLOR_CYAN</B>        3     0,max,max
+                    red       <B>COLOR_RED</B>         4     max,0,0
+                    magenta   <B>COLOR_MAGENTA</B>     5     max,0,max
+                    yellow    <B>COLOR_YELLOW</B>      6     max,max,0
+                    white     <B>COLOR_WHITE</B>       7     max,max,max
 
-       It is important to not confuse the two sets of color capabilities; oth-
-       erwise red/blue will be interchanged on the display.
+       It is important to not confuse the  two  sets  of  color  capabilities;
+       otherwise red/blue will be interchanged on the display.
 
-       On  an  HP-like terminal, use <STRONG>scp</STRONG> with a color-pair number parameter to
+       On  an  HP-like terminal, use <B>scp</B> with a color-pair number parameter to
        set which color pair is current.
 
-       Some terminals allow the <EM>color</EM> <EM>values</EM> to be modified:
+       Some terminals allow the <I>color</I> <I>values</I> to be modified:
 
-       <STRONG>o</STRONG>   On a Tektronix-like terminal, the capability <STRONG>ccc</STRONG> may be present  to
-           indicate  that colors can be modified.  If so, the <STRONG>initc</STRONG> capability
-           will take a color number (0 to <STRONG>colors</STRONG> - 1)and three more parameters
+       <B>o</B>   On a Tektronix-like terminal, the capability <B>ccc</B> may be present  to
+           indicate  that colors can be modified.  If so, the <B>initc</B> capability
+           will take a color number (0 to <B>colors</B> - 1)and three more parameters
            which  describe the color.  These three parameters default to being
-           interpreted as RGB (Red, Green, Blue) values.  If the boolean capa-
-           bility  <STRONG>hls</STRONG>  is  present,  they are instead as HLS (Hue, Lightness,
+           interpreted as RGB (Red,  Green,  Blue)  values.   If  the  boolean
+           capability <B>hls</B> is present, they are instead as HLS (Hue, Lightness,
            Saturation) indices.  The ranges are terminal-dependent.
 
-       <STRONG>o</STRONG>   On an HP-like terminal, <STRONG>initp</STRONG> may give a capability for changing  a
-           color-pair value.  It will take seven parameters; a color-pair num-
-           ber (0 to <STRONG>max_pairs</STRONG> - 1), and two triples  describing  first  back-
-           ground  and then foreground colors.  These parameters must be (Red,
-           Green, Blue) or (Hue, Lightness, Saturation) depending on <STRONG>hls</STRONG>.
+       <B>o</B>   On an HP-like terminal, <B>initp</B> may give a capability for changing  a
+           color-pair  value.   It  will  take  seven parameters; a color-pair
+           number (0 to <B>max_pairs</B> -  1),  and  two  triples  describing  first
+           background  and  then  foreground colors.  These parameters must be
+           (Red, Green, Blue) or (Hue,  Lightness,  Saturation)  depending  on
+           <B>hls</B>.
 
-       On some color terminals, colors collide with highlights.  You can  reg-
-       ister  these collisions with the <STRONG>ncv</STRONG> capability.  This is a bit-mask of
-       attributes not to be used when colors are enabled.  The  correspondence
-       with the attributes understood by <STRONG>curses</STRONG> is as follows:
+       On  some  color  terminals,  colors  collide  with highlights.  You can
+       register these collisions with the <B>ncv</B> capability.  This is a  bit-mask
+       of   attributes   not   to  be  used  when  colors  are  enabled.   The
+       correspondence with the attributes understood by <B>curses</B> is as follows:
 
-                  <STRONG>Attribute</STRONG>              <STRONG>Bit</STRONG>   <STRONG>Decimal</STRONG>      <STRONG>Set</STRONG> <STRONG>by</STRONG>
+                  <B>Attribute</B>              <B>Bit</B>   <B>Decimal</B>      <B>Set</B> <B>by</B>
                   A_STANDOUT             0     1            sgr
                   A_UNDERLINE            1     2            sgr
                   A_REVERSE              2     4            sgr
@@ -2174,244 +2264,244 @@
                   A_VERTICAL             14    16384        sgr1
                   A_ITALIC               15    32768        sitm
 
-       For  example, on many IBM PC consoles, the underline attribute collides
-       with the foreground color blue and is  not  available  in  color  mode.
-       These should have an <STRONG>ncv</STRONG> capability of 2.
+       For example, on many IBM PC consoles, the underline attribute  collides
+       with  the  foreground  color  blue  and is not available in color mode.
+       These should have an <B>ncv</B> capability of 2.
 
-       SVr4  curses does nothing with <STRONG>ncv</STRONG>, ncurses recognizes it and optimizes
+       SVr4 curses does nothing with <B>ncv</B>, ncurses recognizes it and  optimizes
        the output in favor of colors.
 
 
 </PRE><H3><a name="h3-Miscellaneous">Miscellaneous</a></H3><PRE>
-       If the terminal requires other than a null (zero) character as  a  pad,
-       then  this  can  be  given as pad.  Only the first character of the pad
+       If  the  terminal requires other than a null (zero) character as a pad,
+       then this can be given as pad.  Only the first  character  of  the  pad
        string is used.  If the terminal does not have a pad character, specify
-       npc.   Note that ncurses implements the termcap-compatible <STRONG>PC</STRONG> variable;
-       though the application may set this value to  something  other  than  a
-       null,  ncurses will test <STRONG>npc</STRONG> first and use napms if the terminal has no
+       npc.  Note that ncurses implements the termcap-compatible <B>PC</B>  variable;
+       though  the  application  may  set this value to something other than a
+       null, ncurses will test <B>npc</B> first and use napms if the terminal has  no
        pad character.
 
-       If the terminal can move up or down half a line, this can be  indicated
-       with <STRONG>hu</STRONG> (half-line up) and <STRONG>hd</STRONG> (half-line down).  This is primarily use-
-       ful for superscripts and subscripts on hard-copy terminals.  If a hard-
-       copy  terminal  can eject to the next page (form feed), give this as <STRONG>ff</STRONG>
-       (usually control L).
+       If  the terminal can move up or down half a line, this can be indicated
+       with <B>hu</B> (half-line up) and <B>hd</B>  (half-line  down).   This  is  primarily
+       useful  for  superscripts  and subscripts on hard-copy terminals.  If a
+       hard-copy terminal can eject to the next page (form feed), give this as
+       <B>ff</B> (usually control/L).
 
-       If there is a command to repeat a given character  a  given  number  of
-       times  (to  save  time transmitting a large number of identical charac-
-       ters) this can be indicated with the  parameterized  string  <STRONG>rep</STRONG>.   The
-       first  parameter  is the character to be repeated and the second is the
-       number of times to repeat it.  Thus, tparm(repeat_char, 'x', 10) is the
-       same as "xxxxxxxxxx".
+       If  there  is  a  command to repeat a given character a given number of
+       times  (to  save  time  transmitting  a  large  number   of   identical
+       characters)  this  can  be indicated with the parameterized string <B>rep</B>.
+       The first parameter is the character to be repeated and the  second  is
+       the number of times to repeat it.  Thus, tparm(repeat_char, 'x', 10) is
+       the same as "xxxxxxxxxx".
 
        If the terminal has a settable command character, such as the TEKTRONIX
-       4025, this can be indicated with <STRONG>cmdch</STRONG>.  A prototype command  character
-       is  chosen  which is used in all capabilities.  This character is given
-       in the <STRONG>cmdch</STRONG> capability to identify it.  The  following  convention  is
+       4025,  this can be indicated with <B>cmdch</B>.  A prototype command character
+       is chosen which is used in all capabilities.  This character  is  given
+       in  the  <B>cmdch</B>  capability to identify it.  The following convention is
        supported on some UNIX systems: The environment is to be searched for a
-       <STRONG>CC</STRONG> variable, and if found, all occurrences of the  prototype  character
+       <B>CC</B>  variable,  and if found, all occurrences of the prototype character
        are replaced with the character in the environment variable.
 
-       Terminal  descriptions  that  do not represent a specific kind of known
-       terminal, such as <EM>switch</EM>, <EM>dialup</EM>, <EM>patch</EM>, and  <EM>network</EM>,  should  include
-       the  <STRONG>gn</STRONG> (generic) capability so that programs can complain that they do
-       not know how to talk to the terminal.  (This capability does not  apply
-       to  <EM>virtual</EM>  terminal  descriptions  for which the escape sequences are
+       Terminal descriptions that do not represent a specific  kind  of  known
+       terminal,  such  as  <I>switch</I>, <I>dialup</I>, <I>patch</I>, and <I>network</I>, should include
+       the <B>gn</B> (generic) capability so that programs can complain that they  do
+       not  know how to talk to the terminal.  (This capability does not apply
+       to <I>virtual</I> terminal descriptions for which  the  escape  sequences  are
        known.)
 
        If the terminal has a "meta key" which acts as a shift key, setting the
-       8th  bit  of any character transmitted, this fact can be indicated with
-       <STRONG>km</STRONG>.  Otherwise, software will assume that the 8th bit is parity and  it
-       will  usually be cleared.  If strings exist to turn this "meta mode" on
-       and off, they can be given as <STRONG>smm</STRONG> and <STRONG>rmm</STRONG>.
+       8th bit of any character transmitted, this fact can be  indicated  with
+       <B>km</B>.   Otherwise, software will assume that the 8th bit is parity and it
+       will usually be cleared.  If strings exist to turn this "meta mode"  on
+       and off, they can be given as <B>smm</B> and <B>rmm</B>.
 
        If the terminal has more lines of memory than will fit on the screen at
-       once,  the number of lines of memory can be indicated with <STRONG>lm</STRONG>.  A value
-       of <STRONG>lm</STRONG>#0 indicates that the number of lines is not fixed, but that there
+       once, the number of lines of memory can be indicated with <B>lm</B>.  A  value
+       of <B>lm</B>#0 indicates that the number of lines is not fixed, but that there
        is still more memory than fits on the screen.
 
-       If  the terminal is one of those supported by the UNIX virtual terminal
-       protocol, the terminal number can be given as <STRONG>vt</STRONG>.
+       If the terminal is one of those supported by the UNIX virtual  terminal
+       protocol, the terminal number can be given as <B>vt</B>.
 
-       Media copy strings which control an auxiliary printer connected to  the
-       terminal  can  be  given as <STRONG>mc0</STRONG>: print the contents of the screen, <STRONG>mc4</STRONG>:
-       turn off the printer, and <STRONG>mc5</STRONG>: turn on the printer.  When  the  printer
-       is  on,  all text sent to the terminal will be sent to the printer.  It
-       is undefined whether the text is also displayed on the terminal  screen
-       when  the  printer  is  on.   A variation <STRONG>mc5p</STRONG> takes one parameter, and
-       leaves the printer on for as many characters as the value of the param-
-       eter, then turns the printer off.  The parameter should not exceed 255.
-       All text, including <STRONG>mc4</STRONG>, is transparently passed to the  printer  while
-       an <STRONG>mc5p</STRONG> is in effect.
+       Media  copy strings which control an auxiliary printer connected to the
+       terminal can be given as <B>mc0</B>: print the contents of  the  screen,  <B>mc4</B>:
+       turn  off  the printer, and <B>mc5</B>: turn on the printer.  When the printer
+       is on, all text sent to the terminal will be sent to the  printer.   It
+       is  undefined whether the text is also displayed on the terminal screen
+       when the printer is on.  A variation  <B>mc5p</B>  takes  one  parameter,  and
+       leaves  the  printer  on  for  as  many  characters as the value of the
+       parameter, then turns the printer off.  The parameter should not exceed
+       255.   All  text, including <B>mc4</B>, is transparently passed to the printer
+       while an <B>mc5p</B> is in effect.
 
 
 </PRE><H3><a name="h3-Glitches-and-Braindamage">Glitches and Braindamage</a></H3><PRE>
-       Hazeltine  terminals, which do not allow "~" characters to be displayed
-       should indicate <STRONG>hz</STRONG>.
+       Hazeltine terminals, which do not allow "~" characters to be  displayed
+       should indicate <B>hz</B>.
 
-       Terminals which ignore a line-feed immediately after an <STRONG>am</STRONG>  wrap,  such
-       as the Concept and vt100, should indicate <STRONG>xenl</STRONG>.
+       Terminals  which  ignore a line-feed immediately after an <B>am</B> wrap, such
+       as the Concept and vt100, should indicate <B>xenl</B>.
 
-       If  <STRONG>el</STRONG>  is  required  to get rid of standout (instead of merely writing
-       normal text on top of it), <STRONG>xhp</STRONG> should be given.
+       If <B>el</B> is required to get rid of standout  (instead  of  merely  writing
+       normal text on top of it), <B>xhp</B> should be given.
 
        Teleray terminals, where tabs turn all characters moved over to blanks,
-       should  indicate  <STRONG>xt</STRONG> (destructive tabs).  Note: the variable indicating
-       this is now "dest_tabs_magic_smso"; in  older  versions,  it  was  tel-
-       eray_glitch.  This glitch is also taken to mean that it is not possible
-       to position the cursor on top of a "magic cookie", that to erase stand-
-       out  mode  it  is instead necessary to use delete and insert line.  The
-       ncurses implementation ignores this glitch.
-
-       The Beehive Superbee, which is unable to correctly transmit the  escape
-       or  control  C  characters, has <STRONG>xsb</STRONG>, indicating that the f1 key is used
-       for escape and f2 for control C.  (Only  certain  Superbees  have  this
-       problem,  depending on the ROM.)  Note that in older terminfo versions,
+       should indicate <B>xt</B> (destructive tabs).  Note: the  variable  indicating
+       this   is   now  "dest_tabs_magic_smso";  in  older  versions,  it  was
+       teleray_glitch.  This glitch is also taken  to  mean  that  it  is  not
+       possible  to  position  the  cursor on top of a "magic cookie", that to
+       erase standout mode it is instead necessary to use  delete  and  insert
+       line.  The ncurses implementation ignores this glitch.
+
+       The  Beehive Superbee, which is unable to correctly transmit the escape
+       or control/C characters, has <B>xsb</B>, indicating that the f1  key  is  used
+       for  escape  and  f2  for control/C.  (Only certain Superbees have this
+       problem, depending on the ROM.)  Note that in older terminfo  versions,
        this capability was called "beehive_glitch"; it is now "no_esc_ctl_c".
 
-       Other specific terminal problems may be corrected by adding more  capa-
-       bilities of the form <STRONG>x</STRONG><EM>x</EM>.
+       Other  specific  terminal  problems  may  be  corrected  by adding more
+       capabilities of the form <B>x</B><I>x</I>.
 
 
 </PRE><H3><a name="h3-Pitfalls-of-Long-Entries">Pitfalls of Long Entries</a></H3><PRE>
-       Long  terminfo  entries are unlikely to be a problem; to date, no entry
-       has even approached terminfo's 4096-byte string-table maximum.   Unfor-
-       tunately,  the  termcap translations are much more strictly limited (to
-       1023 bytes), thus termcap translations of  long  terminfo  entries  can
+       Long terminfo entries are unlikely to be a problem; to date,  no  entry
+       has   even   approached   terminfo's  4096-byte  string-table  maximum.
+       Unfortunately, the termcap translations are much more strictly  limited
+       (to 1023 bytes), thus termcap translations of long terminfo entries can
        cause problems.
 
-       The  man  pages  for  4.3BSD and older versions of <STRONG>tgetent</STRONG> instruct the
-       user to allocate a 1024-byte buffer for the termcap entry.   The  entry
-       gets  null-terminated by the termcap library, so that makes the maximum
-       safe length for a termcap entry 1k-1 (1023) bytes.  Depending  on  what
-       the  application  and the termcap library being used does, and where in
-       the termcap file the terminal type that <STRONG>tgetent</STRONG> is  searching  for  is,
+       The man pages for 4.3BSD and older versions  of  <B>tgetent</B>  instruct  the
+       user  to  allocate a 1024-byte buffer for the termcap entry.  The entry
+       gets null-terminated by the termcap library, so that makes the  maximum
+       safe  length  for a termcap entry 1k-1 (1023) bytes.  Depending on what
+       the application and the termcap library being used does, and  where  in
+       the  termcap  file  the terminal type that <B>tgetent</B> is searching for is,
        several bad things can happen.
 
-       Some  termcap libraries print a warning message or exit if they find an
+       Some termcap libraries print a warning message or exit if they find  an
        entry that's longer than 1023 bytes; others do not; others truncate the
-       entries  to  1023  bytes.  Some application programs allocate more than
+       entries to 1023 bytes.  Some application programs  allocate  more  than
        the recommended 1K for the termcap entry; others do not.
 
-       Each termcap entry has two important sizes associated with  it:  before
-       "tc"  expansion, and after "tc" expansion.  "tc" is the capability that
+       Each  termcap  entry has two important sizes associated with it: before
+       "tc" expansion, and after "tc" expansion.  "tc" is the capability  that
        tacks on another termcap entry to the end of the current one, to add on
        its capabilities.  If a termcap entry does not use the "tc" capability,
        then of course the two lengths are the same.
 
-       The "before tc expansion" length is the most important one, because  it
-       affects  more than just users of that particular terminal.  This is the
-       length of the entry as it exists in /etc/termcap, minus the  backslash-
-       newline pairs, which <STRONG>tgetent</STRONG> strips out while reading it.  Some termcap
+       The  "before tc expansion" length is the most important one, because it
+       affects more than just users of that particular terminal.  This is  the
+       length  of the entry as it exists in /etc/termcap, minus the backslash-
+       newline pairs, which <B>tgetent</B> strips out while reading it.  Some termcap
        libraries strip off the final newline, too (GNU termcap does not).  Now
        suppose:
 
-       <STRONG>o</STRONG>   a termcap entry before expansion is more than 1023 bytes long,
+       <B>o</B>   a termcap entry before expansion is more than 1023 bytes long,
 
-       <STRONG>o</STRONG>   and the application has only allocated a 1k buffer,
+       <B>o</B>   and the application has only allocated a 1k buffer,
 
-       <STRONG>o</STRONG>   and  the termcap library (like the one in BSD/OS 1.1 and GNU) reads
-           the whole entry into the buffer, no matter what its length, to  see
+       <B>o</B>   and the termcap library (like the one in BSD/OS 1.1 and GNU)  reads
+           the  whole entry into the buffer, no matter what its length, to see
            if it is the entry it wants,
 
-       <STRONG>o</STRONG>   and  <STRONG>tgetent</STRONG>  is  searching  for a terminal type that either is the
-           long entry, appears in the termcap file after the  long  entry,  or
-           does  not  appear in the file at all (so that <STRONG>tgetent</STRONG> has to search
+       <B>o</B>   and <B>tgetent</B> is searching for a terminal type  that  either  is  the
+           long  entry,  appears  in the termcap file after the long entry, or
+           does not appear in the file at all (so that <B>tgetent</B> has  to  search
            the whole termcap file).
 
-       Then <STRONG>tgetent</STRONG> will overwrite memory, perhaps  its  stack,  and  probably
-       core  dump the program.  Programs like telnet are particularly vulnera-
-       ble; modern telnets pass along values like the terminal type  automati-
-       cally.   The  results are almost as undesirable with a termcap library,
-       like SunOS 4.1.3 and Ultrix 4.4, that prints warning messages  when  it
-       reads  an  overly  long  termcap entry.  If a termcap library truncates
-       long entries, like OSF/1 3.0, it is  immune  to  dying  here  but  will
-       return incorrect data for the terminal.
+       Then  <B>tgetent</B>  will  overwrite  memory, perhaps its stack, and probably
+       core  dump  the  program.   Programs  like  telnet   are   particularly
+       vulnerable;  modern  telnets  pass  along values like the terminal type
+       automatically.  The results are almost as undesirable  with  a  termcap
+       library,  like SunOS 4.1.3 and Ultrix 4.4, that prints warning messages
+       when it reads an overly long  termcap  entry.   If  a  termcap  library
+       truncates  long entries, like OSF/1 3.0, it is immune to dying here but
+       will return incorrect data for the terminal.
 
-       The  "after  tc  expansion"  length  will  have a similar effect to the
+       The "after tc expansion" length will  have  a  similar  effect  to  the
        above, but only for people who actually set TERM to that terminal type,
-       since  <STRONG>tgetent</STRONG>  only  does "tc" expansion once it is found the terminal
+       since <B>tgetent</B> only does "tc" expansion once it is  found  the  terminal
        type it was looking for, not while searching.
 
-       In summary, a termcap entry that is longer than 1023 bytes  can  cause,
-       on  various  combinations of termcap libraries and applications, a core
-       dump, warnings, or incorrect operation.  If it is too long even  before
-       "tc"  expansion,  it will have this effect even for users of some other
-       terminal types and users whose TERM variable does not  have  a  termcap
+       In  summary,  a termcap entry that is longer than 1023 bytes can cause,
+       on various combinations of termcap libraries and applications,  a  core
+       dump,  warnings, or incorrect operation.  If it is too long even before
+       "tc" expansion, it will have this effect even for users of  some  other
+       terminal  types  and  users whose TERM variable does not have a termcap
        entry.
 
-       When  in  -C (translate to termcap) mode, the <STRONG>ncurses</STRONG> implementation of
-       <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG> issues warning messages when the pre-tc  length  of  a  termcap
-       translation  is  too  long.  The -c (check) option also checks resolved
+       When in -C (translate to termcap) mode, the <B>ncurses</B>  implementation  of
+       <B><A HREF="tic.1M.html">tic(1M)</A></B>  issues  warning  messages  when the pre-tc length of a termcap
+       translation is too long.  The -c (check) option  also  checks  resolved
        (after tc expansion) lengths.
 
 
 </PRE><H3><a name="h3-Binary-Compatibility">Binary Compatibility</a></H3><PRE>
-       It is not wise to count  on  portability  of  binary  terminfo  entries
-       between  commercial  UNIX  versions.   The problem is that there are at
-       least two versions of terminfo (under HP-UX  and  AIX)  which  diverged
-       from  System  V terminfo after SVr1, and have added extension capabili-
-       ties to the string table that (in the binary format) collide with  Sys-
-       tem V and XSI Curses extensions.
+       It  is  not  wise  to  count  on portability of binary terminfo entries
+       between commercial UNIX versions.  The problem is  that  there  are  at
+       least  two  versions  of  terminfo (under HP-UX and AIX) which diverged
+       from  System  V  terminfo  after  SVr1,  and   have   added   extension
+       capabilities  to  the  string table that (in the binary format) collide
+       with System V and XSI Curses extensions.
 
 
 </PRE><H2><a name="h2-EXTENSIONS">EXTENSIONS</a></H2><PRE>
-       Searching   for  terminal  descriptions  in  <STRONG>$HOME/.terminfo</STRONG>  and  TER-
-       MINFO_DIRS is not supported by older implementations.
+       Searching   for   terminal   descriptions   in   <B>$HOME/.terminfo</B>    and
+       TERMINFO_DIRS is not supported by older implementations.
 
-       Some SVr4 <STRONG>curses</STRONG> implementations, and all  previous  to  SVr4,  do  not
+       Some  SVr4  <B>curses</B>  implementations,  and  all previous to SVr4, do not
        interpret the %A and %O operators in parameter strings.
 
-       SVr4/XPG4  do  not  specify  whether <STRONG>msgr</STRONG> licenses movement while in an
-       alternate-character-set mode (such modes may, among other  things,  map
-       CR  and  NL  to  characters  that  do  not trigger local motions).  The
-       <STRONG>ncurses</STRONG> implementation ignores <STRONG>msgr</STRONG> in <STRONG>ALTCHARSET</STRONG>  mode.   This  raises
-       the  possibility that an XPG4 implementation making the opposite inter-
-       pretation may need terminfo entries  made  for  <STRONG>ncurses</STRONG>  to  have  <STRONG>msgr</STRONG>
+       SVr4/XPG4 do not specify whether <B>msgr</B> licenses  movement  while  in  an
+       alternate-character-set  mode  (such modes may, among other things, map
+       CR and NL to characters  that  do  not  trigger  local  motions).   The
+       <B>ncurses</B>  implementation  ignores  <B>msgr</B> in <B>ALTCHARSET</B> mode.  This raises
+       the  possibility  that  an  XPG4  implementation  making  the  opposite
+       interpretation  may need terminfo entries made for <B>ncurses</B> to have <B>msgr</B>
        turned off.
 
-       The <STRONG>ncurses</STRONG> library handles insert-character and insert-character modes
-       in a slightly non-standard way to get better  update  efficiency.   See
-       the <STRONG>Insert/Delete</STRONG> <STRONG>Character</STRONG> subsection above.
+       The <B>ncurses</B> library handles insert-character and insert-character modes
+       in  a  slightly  non-standard way to get better update efficiency.  See
+       the <B>Insert/Delete</B> <B>Character</B> subsection above.
 
-       The  parameter  substitutions  for  <STRONG>set_clock</STRONG> and <STRONG>display_clock</STRONG> are not
-       documented in SVr4 or the XSI Curses standard.  They are  deduced  from
+       The parameter substitutions for <B>set_clock</B>  and  <B>display_clock</B>  are  not
+       documented  in  SVr4 or the XSI Curses standard.  They are deduced from
        the documentation for the AT&amp;T 505 terminal.
 
-       Be  careful  assigning the <STRONG>kmous</STRONG> capability.  The <STRONG>ncurses</STRONG> library wants
-       to interpret it as <STRONG>KEY_MOUSE</STRONG>, for use by terminals and  emulators  like
-       xterm  that can return mouse-tracking information in the keyboard-input
+       Be careful assigning the <B>kmous</B> capability.  The <B>ncurses</B>  library  wants
+       to  interpret  it as <B>KEY_MOUSE</B>, for use by terminals and emulators like
+       xterm that can return mouse-tracking information in the  keyboard-input
        stream.
 
-       X/Open Curses does not mention  italics.   Portable  applications  must
-       assume  that  numeric  capabilities  are  signed  16-bit  values.  This
-       includes the <EM>no</EM><STRONG>_</STRONG><EM>color</EM><STRONG>_</STRONG><EM>video</EM> (ncv) capability.   The  32768  mask  value
-       used  for  italics with ncv can be confused with an absent or cancelled
-       ncv.  If italics should work with colors, then the ncv  value  must  be
+       X/Open  Curses  does  not  mention italics.  Portable applications must
+       assume that  numeric  capabilities  are  signed  16-bit  values.   This
+       includes  the  <I>no</I><B>_</B><I>color</I><B>_</B><I>video</I>  (ncv)  capability.  The 32768 mask value
+       used for italics with ncv can be confused with an absent  or  cancelled
+       ncv.   If  italics  should work with colors, then the ncv value must be
        specified, even if it is zero.
 
-       Different  commercial  ports  of  terminfo and curses support different
-       subsets of the XSI Curses standard and (in some cases) different exten-
-       sion sets.  Here is a summary, accurate as of October 1995:
+       Different commercial ports of terminfo  and  curses  support  different
+       subsets  of  the  XSI  Curses  standard  and  (in some cases) different
+       extension sets.  Here is a summary, accurate as of October 1995:
 
-       <STRONG>o</STRONG>   <STRONG>SVR4,</STRONG> <STRONG>Solaris,</STRONG> <STRONG>ncurses</STRONG> -- These support all SVr4 capabilities.
+       <B>o</B>   <B>SVR4,</B> <B>Solaris,</B> <B>ncurses</B> -- These support all SVr4 capabilities.
 
-       <STRONG>o</STRONG>   <STRONG>SGI</STRONG> -- Supports the SVr4 set, adds one undocumented extended string
-           capability (<STRONG>set_pglen</STRONG>).
+       <B>o</B>   <B>SGI</B> -- Supports the SVr4 set, adds one undocumented extended string
+           capability (<B>set_pglen</B>).
 
-       <STRONG>o</STRONG>   <STRONG>SVr1,</STRONG> <STRONG>Ultrix</STRONG> -- These support a restricted subset of terminfo capa-
-           bilities.   The  booleans  end  with  <STRONG>xon_xoff</STRONG>;  the  numerics with
-           <STRONG>width_status_line</STRONG>; and the strings with <STRONG>prtr_non</STRONG>.
+       <B>o</B>   <B>SVr1,</B>  <B>Ultrix</B>  --  These  support  a  restricted subset of terminfo
+           capabilities.  The booleans end with <B>xon_xoff</B>;  the  numerics  with
+           <B>width_status_line</B>; and the strings with <B>prtr_non</B>.
 
-       <STRONG>o</STRONG>   <STRONG>HP/UX</STRONG> -- Supports the  SVr1  subset,  plus  the  SVr[234]  numerics
-           <STRONG>num_labels</STRONG>,   <STRONG>label_height</STRONG>,  <STRONG>label_width</STRONG>,  plus  function  keys  11
-           through 63, plus <STRONG>plab_norm</STRONG>,  <STRONG>label_on</STRONG>,  and  <STRONG>label_off</STRONG>,  plus  some
+       <B>o</B>   <B>HP/UX</B>  --  Supports  the  SVr1  subset,  plus the SVr[234] numerics
+           <B>num_labels</B>,  <B>label_height</B>,  <B>label_width</B>,  plus  function  keys   11
+           through  63,  plus  <B>plab_norm</B>,  <B>label_on</B>,  and <B>label_off</B>, plus some
            incompatible extensions in the string table.
 
-       <STRONG>o</STRONG>   <STRONG>AIX</STRONG>  -- Supports the SVr1 subset, plus function keys 11 through 63,
+       <B>o</B>   <B>AIX</B> -- Supports the SVr1 subset, plus function keys 11 through  63,
            plus a number of incompatible string table extensions.
 
-       <STRONG>o</STRONG>   <STRONG>OSF</STRONG> -- Supports both the SVr4 set and the AIX extensions.
+       <B>o</B>   <B>OSF</B> -- Supports both the SVr4 set and the AIX extensions.
 
 
 </PRE><H2><a name="h2-FILES">FILES</a></H2><PRE>
@@ -2419,8 +2509,9 @@
 
 
 </PRE><H2><a name="h2-SEE-ALSO">SEE ALSO</a></H2><PRE>
-       <STRONG><A HREF="tic.1m.html">tic(1m)</A></STRONG>, <STRONG><A HREF="infocmp.1m.html">infocmp(1m)</A></STRONG>, <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_color.3x.html">curs_color(3x)</A></STRONG>,  <STRONG>printf(3)</STRONG>,  <STRONG><A HREF="term.5.html">term(5)</A></STRONG>.
-       <STRONG><A HREF="term_variables.3x.html">term_variables(3x)</A></STRONG>.  <STRONG><A HREF="user_caps.5.html">user_caps(5)</A></STRONG>.
+       <B><A HREF="infocmp.1M.html">infocmp(1M)</A></B>,     <B><A HREF="tabs.1.html">tabs(1)</A></B>,    <B><A HREF="tic.1M.html">tic(1M)</A></B>,    <B><A HREF="curses.3X.html">curses(3X)</A></B>,    <B><A HREF="curs_color.3X.html">curs_color(3X)</A></B>,
+       <B><A HREF="curs_variables.3X.html">curs_variables(3X)</A></B>,    <B>printf(3)</B>,     <B><A HREF="term_variables.3X.html">term_variables(3X)</A></B>.      <B><A HREF="term.5.html">term(5)</A></B>.
+       <B><A HREF="user_caps.5.html">user_caps(5)</A></B>.
 
 
 </PRE><H2><a name="h2-AUTHORS">AUTHORS</a></H2><PRE>
@@ -2429,7 +2520,7 @@
 
 
 
-                                                                   <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
+                                                                   <B><A HREF="terminfo.5.html">terminfo(5)</A></B>
 </PRE>
 <div class="nav">
 <ul>