X-Git-Url: https://ncurses.scripts.mit.edu/?p=ncurses.git;a=blobdiff_plain;f=doc%2Fhtml%2Fman%2Ftset.1.html;h=d76c27d8368511b40b423d6f19a438531b876e4f;hp=9970e0a96775b4d159c0a068ca6795952f9b5e29;hb=f344f8539c1543f8cd65a5bb142dbaf23b9421d2;hpb=603f0cb25b7acc8f04f4b18d2a2fe6f90039829a
diff --git a/doc/html/man/tset.1.html b/doc/html/man/tset.1.html
index 9970e0a9..d76c27d8 100644
--- a/doc/html/man/tset.1.html
+++ b/doc/html/man/tset.1.html
@@ -1,6 +1,6 @@
@@ -59,58 +59,106 @@
- Tset initializes terminals. Tset first determines the
- type of terminal that you are using. This determination
- is done as follows, using the first terminal type found.
+ This program initializes terminals.
+
+ First, tset retrieves the current terminal mode settings
+ for your terminal. It does this by successively testing
+
+ o the standard error,
+
+ o standard output,
+
+ o standard input and
+
+ o ultimately "/dev/tty"
+
+ to obtain terminal settings. Having retrieved these set-
+ tings, tset remembers which file descriptor to use when
+ updating settings.
+
+ Next, tset determines the type of terminal that you are
+ using. This determination is done as follows, using the
+ first terminal type found.
1. The terminal argument specified on the command line.
2. The value of the TERM environmental variable.
- 3. (BSD systems only.) The terminal type associated with
- the standard error output device in the /etc/ttys file.
- (On System-V-like UNIXes and systems using that conven-
+ 3. (BSD systems only.) The terminal type associated with
+ the standard error output device in the /etc/ttys file.
+ (On System-V-like UNIXes and systems using that conven-
tion, getty does this job by setting TERM according to the
type passed to it by /etc/inittab.)
4. The default terminal type, "unknown".
- If the terminal type was not specified on the command-
- line, the -m option mappings are then applied (see the
+ If the terminal type was not specified on the command-
+ line, the -m option mappings are then applied (see the
section TERMINAL TYPE MAPPING for more information).
- Then, if the terminal type begins with a question mark
+ Then, if the terminal type begins with a question mark
("?"), the user is prompted for confirmation of the termi-
- nal type. An empty response confirms the type, or,
- another type can be entered to specify a new type. Once
- the terminal type has been determined, the terminfo entry
- for the terminal is retrieved. If no terminfo entry is
- found for the type, the user is prompted for another ter-
- minal type.
-
- Once the terminfo entry is retrieved, the window size,
- backspace, interrupt and line kill characters (among many
- other things) are set and the terminal and tab initializa-
- tion strings are sent to the standard error output.
- Finally, if the erase, interrupt and line kill characters
- have changed, or are not set to their default values,
- their values are displayed to the standard error output.
+ nal type. An empty response confirms the type, or,
+ another type can be entered to specify a new type. Once
+ the terminal type has been determined, the terminal
+ description for the terminal is retrieved. If no terminal
+ description is found for the type, the user is prompted
+ for another terminal type.
+
+ Once the terminal description is retrieved,
+
+ o if the "-w" option is enabled, tset may update the
+ terminal's window size.
+
+ If the window size cannot be obtained from the operat-
+ ing system, but the terminal description (or environ-
+ ment, e.g., LINES and COLUMNS variables specify this),
+ use this to set the operating system's notion of the
+ window size.
+
+ o if the "-c" option is enabled, the backspace, inter-
+ rupt and line kill characters (among many other
+ things) are set
+
+ o unless the "-I" option is enabled, the terminal and
+ tab initialization strings are sent to the standard
+ error output, and tset waits one second (in case a
+ hardware reset was issued).
+
+ o Finally, if the erase, interrupt and line kill charac-
+ ters have changed, or are not set to their default
+ values, their values are displayed to the standard
+ error output.
- When invoked as reset, tset sets cooked and echo modes,
- turns off cbreak and raw modes, turns on newline transla-
- tion and resets any unset special characters to their
- default values before doing the terminal initialization
- described above. This is useful after a program dies
- leaving a terminal in an abnormal state. Note, you may
- have to type
+ When invoked as reset, tset sets the terminal modes to
+ "sane" values:
- <LF>reset<LF>
+ o sets cooked and echo modes,
- (the line-feed character is normally control-J) to get the
- terminal to work, as carriage-return may no longer work in
- the abnormal state. Also, the terminal will often not
- echo the command.
+ o turns off cbreak and raw modes,
+
+ o turns on newline translation and
+
+ o resets any unset special characters to their default
+ values
+
+ before doing the terminal initialization described above.
+ Also, rather than using the terminal initialization
+ strings, it uses the terminal reset strings.
+
+ The reset command is useful after a program dies leaving a
+ terminal in an abnormal state:
+
+ o you may have to type
+
+ <LF>reset<LF>
+
+ (the line-feed character is normally control-J) to get
+ the terminal to work, as carriage-return may no longer
+ work in the abnormal state.
+
+ o Also, the terminal will often not echo the command.
@@ -150,7 +198,7 @@
program, and exits.
-w Resize the window to match the size deduced via
- setupterm. Normally this has no effect, unless
+ setupterm(3x). Normally this has no effect, unless
setupterm is not able to detect the window size.
The arguments for the -e, -i, and -k options may either be
@@ -186,10 +234,10 @@
often desirable to provide information about the type of
terminal used on such ports.
- The purpose of the -m option is to map from some set of
- conditions to a terminal type, that is, to tell tset "If
- I'm on this port at a particular speed, guess that I'm on
- that kind of terminal".
+ The -m options maps from some set of conditions to a ter-
+ minal type, that is, to tell tset "If I'm on this port at
+ a particular speed, guess that I'm on that kind of termi-
+ nal".
The argument to the -m option consists of an optional port
type, an optional operator, an optional baud rate specifi-
@@ -237,10 +285,38 @@
- The tset command appeared in BSD 3.0. The ncurses imple-
- mentation was lightly adapted from the 4.4BSD sources for
- a terminfo environment by Eric S. Raymond <esr@snark.thyr-
- sus.com>.
+ A reset command appeared in 2BSD (April 1979), written by
+ Kurt Shoens. This program set the erase and kill charac-
+ ters to ^H (backspace) and @ respectively. Mark Horton
+ improved that in 3BSD (October 1979), adding intr, quit,
+ start/stop and eof characters as well as changing the pro-
+ gram to avoid modifying any user settings.
+
+ Later in 4.1BSD (December 1980), Mark Horton added a call
+ to the tset program using the -I and -Q options, i.e.,
+ using that to improve the terminal modes. With those
+ options, that version of reset did not use the termcap
+ database.
+
+ A separate tset command was provided in 2BSD by Eric All-
+ man. While the oldest published source (from 1979) pro-
+ vides both tset and reset, Allman's comments in the 2BSD
+ source code indicate that he began work in October 1977,
+ continuing development over the next few years.
+
+ In September 1980, Eric Allman modified tset, adding the
+ code from the existing "reset" feature when tset was
+ invoked as reset. Rather than simply copying the existing
+ program, in this merged version, tset used the termcap
+ database to do additional (re)initialization of the termi-
+ nal. This version appeared in 4.1cBSD, late in 1982.
+
+ Other developers (e.g., Keith Bostic and Jim Bloom) con-
+ tinued to modify tset until 4.4BSD was released in 1993.
+
+ The ncurses implementation was lightly adapted from the
+ 4.4BSD sources for a terminfo environment by Eric S. Ray-
+ mond <esr@snark.thyrsus.com>.
@@ -248,75 +324,84 @@
Issue 7 (POSIX.1-2008) nor X/Open Curses Issue 7 documents
tset or reset.
- The tset utility has been provided for backward-compati-
- bility with BSD environments (under most modern UNIXes,
- /etc/inittab and getty(1) can set TERM appropriately for
- each dial-up line; this obviates what was tset's most
- important use). This implementation behaves like 4.4BSD
- tset, with a few exceptions specified here.
-
- The -S option of BSD tset no longer works; it prints an
- error message to stderr and dies. The -s option only sets
- TERM, not TERMCAP. Both of these changes are because the
- TERMCAP variable is no longer supported under terminfo-
- based ncurses, which makes tset -S useless (we made it die
- noisily rather than silently induce lossage).
-
- There was an undocumented 4.4BSD feature that invoking
+ The AT&T tput utility (AIX, HPUX, Solaris) incorporated
+ the terminal-mode manipulation as well as termcap-based
+ features such as resetting tabstops from tset in BSD
+ (4.1c), presumably with the intention of making tset obso-
+ lete. However, each of those systems still provides tset.
+ In fact, the commonly-used reset utility is always an
+ alias for tset.
+
+ The tset utility provides for backward-compatibility with
+ BSD environments (under most modern UNIXes, /etc/inittab
+ and getty(1) can set TERM appropriately for each dial-up
+ line; this obviates what was tset's most important use).
+ This implementation behaves like 4.4BSD tset, with a few
+ exceptions specified here.
+
+ A few options are different because the TERMCAP variable
+ is no longer supported under terminfo-based ncurses:
+
+ o The -S option of BSD tset no longer works; it prints
+ an error message to the standard error and dies.
+
+ o The -s option only sets TERM, not TERMCAP.
+
+ There was an undocumented 4.4BSD feature that invoking
tset via a link named "TSET" (or via any other name begin-
- ning with an upper-case letter) set the terminal to use
+ ning with an upper-case letter) set the terminal to use
upper-case only. This feature has been omitted.
- The -A, -E, -h, -u and -v options were deleted from the
- tset utility in 4.4BSD. None of them were documented in
- 4.3BSD and all are of limited utility at best. The -a,
+ The -A, -E, -h, -u and -v options were deleted from the
+ tset utility in 4.4BSD. None of them were documented in
+ 4.3BSD and all are of limited utility at best. The -a,
-d, and -p options are similarly not documented or useful,
- but were retained as they appear to be in widespread use.
- It is strongly recommended that any usage of these three
- options be changed to use the -m option instead. The -a,
- -d, and -p options are therefore omitted from the usage
+ but were retained as they appear to be in widespread use.
+ It is strongly recommended that any usage of these three
+ options be changed to use the -m option instead. The -a,
+ -d, and -p options are therefore omitted from the usage
summary above.
- Very old systems, e.g., 3BSD, used a different terminal
- driver which was replaced in 4BSD in the early 1980s. To
- accommodate these older systems, the 4BSD tset provided a
- -n option to specify that the new terminal driver should
+ Very old systems, e.g., 3BSD, used a different terminal
+ driver which was replaced in 4BSD in the early 1980s. To
+ accommodate these older systems, the 4BSD tset provided a
+ -n option to specify that the new terminal driver should
be used. This implementation does not provide that
choice.
- It is still permissible to specify the -e, -i, and -k
- options without arguments, although it is strongly recom-
- mended that such usage be fixed to explicitly specify the
+ It is still permissible to specify the -e, -i, and -k
+ options without arguments, although it is strongly recom-
+ mended that such usage be fixed to explicitly specify the
character.
- As of 4.4BSD, executing tset as reset no longer implies
+ As of 4.4BSD, executing tset as reset no longer implies
the -Q option. Also, the interaction between the - option
and the terminal argument in some historic implementations
of tset has been removed.
The -c and -w options are not found in earlier implementa-
- tions. However, a different window size-change feature
+ tions. However, a different window size-change feature
was provided in 4.4BSD.
- o In 4.4BSD, tset uses the window size from the termcap
+ o In 4.4BSD, tset uses the window size from the termcap
description to set the window size if tset is not able
to obtain the window size from the operating system.
- o In ncurses, tset obtains the window size using
+ o In ncurses, tset obtains the window size using
setupterm, which may be from the operating system, the
- LINES and COLUMNS environment variables or the termi-
+ LINES and COLUMNS environment variables or the termi-
nal description.
Obtaining the window size from the terminal description is
- common to both implementations, but considered obsoles-
- cent. Its only practical use is for hardware terminals.
- Generally speaking, a window size would be unset only if
+ common to both implementations, but considered obsoles-
+ cent. Its only practical use is for hardware terminals.
+ Generally speaking, a window size would be unset only if
there were some problem obtaining the value from the oper-
- ating system (and setupterm would still fail). For that
+ ating system (and setupterm would still fail). For that
reason, the LINES and COLUMNS environment variables may be
- useful for working around window-size problems. Those
- have the drawback that if the window is resized, those
- variables must be recomputed and reassigned. To do this
+ useful for working around window-size problems. Those
+ have the drawback that if the window is resized, those
+ variables must be recomputed and reassigned. To do this
more easily, use the resize(1) program.
@@ -327,7 +412,7 @@
tells tset whether to initialize TERM using sh or csh
syntax.
- TERM Denotes your terminal type. Each terminal type is
+ TERM Denotes your terminal type. Each terminal type is
distinct, though many are similar.
TERMCAP
@@ -339,7 +424,7 @@
/etc/ttys
- system port name to terminal type mapping database
+ system port name to terminal type mapping database
(BSD versions only).
/usr/share/terminfo
@@ -350,7 +435,7 @@
csh(1), sh(1), stty(1), curs_terminfo(3x), tty(4),
terminfo(5), ttys(5), environ(7)
- This describes ncurses version 6.0 (patch 20160611).
+ This describes ncurses version 6.0 (patch 20170114).